diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index dd10b51..5405f7a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
-	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
@@ -84,6 +82,8 @@
 	- info on block devices & drivers
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
@@ -168,6 +168,8 @@
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+io-mapping.txt
+	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 428676cf..25be325 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -133,46 +133,6 @@
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
-
-What:		/sys/bus/pci/slots/...
-Date:		April 2005 (possibly older)
-KernelVersion:	2.6.12 (possibly older)
-Contact:	linux-pci@vger.kernel.org
-Description:
-		When the appropriate driver is loaded, it will create a
-		directory per claimed physical PCI slot in
-		/sys/bus/pci/slots/.  The names of these directories are
-		specific to the driver, which in turn, are specific to the
-		platform, but in general, should match the label on the
-		machine's physical chassis.
-
-		The drivers that can create slot directories include the
-		PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
-
-		The slot directories contain, at a minimum, a file named
-		'address' which contains the PCI bus:device:function tuple.
-		Other files may appear as well, but are specific to the
-		driver.
-
-What:		/sys/bus/pci/slots/.../function[0-7]
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		and the physical slot is actually populated with a device,
-		symbolic links in the slot directory pointing to the
-		device's PCI functions are created as well.
-
-What:		/sys/bus/pci/devices/.../slot
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		a symbolic link pointing to the slot directory will be
-		created as well.
-
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 9737243..7c3c098 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -58,7 +58,7 @@
 </contrib>
 	<affiliation>
 	  <address>
-	    <email>awalls@radix.net</email>
+	    <email>awalls@md.metrocast.net</email>
 	  </address>
 	</affiliation>
       </author>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
index 87e4f0f..402229e 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -53,8 +53,10 @@
 automatically, similar to sensing the video standard. To do so, applications
 call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
 &v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. When detection is not
-possible or fails, the value V4L2_DV_INVALID is returned.</para>
+returned in the preset field of &v4l2-dv-preset;. If the preset could not be
+detected because there was no signal, or the signal was unreliable, or the
+signal did not map to a supported preset, then the value V4L2_DV_INVALID is
+returned.</para>
   </refsect1>
 
   <refsect1>
diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt
new file mode 100644
index 0000000..93c1fd7
--- /dev/null
+++ b/Documentation/apparmor.txt
@@ -0,0 +1,39 @@
+--- What is AppArmor? ---
+
+AppArmor is MAC style security extension for the Linux kernel.  It implements
+a task centered policy, with task "profiles" being created and loaded
+from user space.  Tasks on the system that do not have a profile defined for
+them run in an unconfined state which is equivalent to standard Linux DAC
+permissions.
+
+--- How to enable/disable ---
+
+set CONFIG_SECURITY_APPARMOR=y
+
+If AppArmor should be selected as the default security module then
+   set CONFIG_DEFAULT_SECURITY="apparmor"
+   and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+
+Build the kernel
+
+If AppArmor is not the default security module it can be enabled by passing
+security=apparmor on the kernel's command line.
+
+If AppArmor is the default security module it can be disabled by passing
+apparmor=0, security=XXXX (where XXX is valid security module), on the
+kernel's command line
+
+For AppArmor to enforce any restrictions beyond standard Linux DAC permissions
+policy must be loaded into the kernel from user space (see the Documentation
+and tools links).
+
+--- Documentation ---
+
+Documentation can be found on the wiki.
+
+--- Links ---
+
+Mailing List - apparmor@lists.ubuntu.com
+Wiki - http://apparmor.wiki.kernel.org/
+User space tools - https://launchpad.net/apparmor
+Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index eb0fae1..771d48d 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -33,7 +33,13 @@
 
 fffe0000	fffeffff	XScale cache flush area.  This is used
 				in proc-xscale.S to flush the whole data
-				cache.  Free for other usage on non-XScale.
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
 
 fff00000	fffdffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 77fd937..7c15871 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -19,8 +19,8 @@
 system control coprocessor. Documentation from ARM can be found
 at http://infocenter.arm.com, search for "TCM Status Register"
 to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
 
 There is further a TCM region register (search for "TCM Region
 Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@
 the MMU, but notice that the TCM if often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
 
 TCM is used for a few things:
 
@@ -65,18 +73,18 @@
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
 
 Functions to go into itcm can be tagged like this:
 int __tcmfunc foo(int bar);
 
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
 Variables to go into dtcm can be tagged like this:
 int __tcmdata foo;
 
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
similarity index 100%
rename from Documentation/IO-mapping.txt
rename to Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt
index a2db352..995baf3 100644
--- a/Documentation/credentials.txt
+++ b/Documentation/credentials.txt
@@ -417,6 +417,9 @@
 This does all the RCU magic inside of it.  The caller must call put_cred() on
 the credentials so obtained when they're finished with.
 
+ [*] Note: The result of __task_cred() should not be passed directly to
+     get_cred() as this may race with commit_cred().
+
 There are a couple of convenience functions to access bits of another task's
 credentials, hiding the RCU magic from the caller:
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 79c5332..0b875e8 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -6,6 +6,8 @@
 7 Dec 2005
 17 Jul 2007	Updated
 
+(c) Mauro Carvalho Chehab <mchehab@redhat.com>
+05 Aug 2009	Nehalem interface
 
 EDAC is maintained and written by:
 
@@ -717,3 +719,153 @@
 The 'test_device_edac' sample driver is located at the
 bluesmoke.sourceforge.net project site for EDAC.
 
+=======================================================================
+NEHALEM USAGE OF EDAC APIs
+
+This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
+Nehalem EDAC driver. They will likely be changed on future versions
+of the driver.
+
+Due to the way Nehalem exports Memory Controller data, some adjustments
+were done at i7core_edac driver. This chapter will cover those differences
+
+1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+   (QPI). At the driver, the term "socket" means one QPI. This is
+   associated with a physical CPU socket.
+
+   Each MC have 3 physical read channels, 3 physical write channels and
+   3 logic channels. The driver currenty sees it as just 3 channels.
+   Each channel can have up to 3 DIMMs.
+
+   The minimum known unity is DIMMs. There are no information about csrows.
+   As EDAC API maps the minimum unity is csrows, the driver sequencially
+   maps channel/dimm into different csrows.
+
+   For example, suposing the following layout:
+	Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	  dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
+        Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+   The driver will map it as:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+
+exports one
+   DIMM per csrow.
+
+   Each QPI is exported as a different memory controller.
+
+2) Nehalem MC has the hability to generate errors. The driver implements this
+   functionality via some error injection nodes:
+
+   For injecting a memory error, there are some sysfs nodes, under
+   /sys/devices/system/edac/mc/mc?/:
+
+   inject_addrmatch/*:
+      Controls the error injection mask register. It is possible to specify
+      several characteristics of the address to match an error code:
+         dimm = the affected dimm. Numbers are relative to a channel;
+         rank = the memory rank;
+         channel = the channel that will generate an error;
+         bank = the affected bank;
+         page = the page address;
+         column (or col) = the address column.
+      each of the above values can be set to "any" to match any valid value.
+
+      At driver init, all values are set to any.
+
+      For example, to generate an error at rank 1 of dimm 2, for any channel,
+      any bank, any page, any column:
+		echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+	To return to the default behaviour of matching any, you can do:
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+   inject_eccmask:
+       specifies what bits will have troubles,
+
+   inject_section:
+       specifies what ECC cache section will get the error:
+		3 for both
+		2 for the highest
+		1 for the lowest
+
+   inject_type:
+       specifies the type of error, being a combination of the following bits:
+		bit 0 - repeat
+		bit 1 - ecc
+		bit 2 - parity
+
+       inject_enable starts the error generation when something different
+       than 0 is written.
+
+   All inject vars can be read. root permission is needed for write.
+
+   Datasheet states that the error will only be generated after a write on an
+   address that matches inject_addrmatch. It seems, however, that reading will
+   also produce an error.
+
+   For example, the following code will generate an error for any write access
+   at socket 0, on any DIMM/address on channel 2:
+
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_type
+   echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask
+   echo 3 >/sys/devices/system/edac/mc/mc0/inject_section
+   echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable
+   dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null
+
+   For socket 1, it is needed to replace "mc0" by "mc1" at the above
+   commands.
+
+   The generated error message will look like:
+
+   EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error))
+
+3) Nehalem specific Corrected Error memory counters
+
+   Nehalem have some registers to count memory errors. The driver uses those
+   registers to report Corrected Errors on devices with Registered Dimms.
+
+   However, those counters don't work with Unregistered Dimms. As the chipset
+   offers some counters that also work with UDIMMS (but with a worse level of
+   granularity than the default ones), the driver exposes those registers for
+   UDIMM memories.
+
+   They can be read by looking at the contents of all_channel_counts/
+
+   $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2
+	0
+
+   What happens here is that errors on different csrows, but at the same
+   dimm number will increment the same counter.
+   So, in this memory mapping:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+   The hardware will increment udimm0 for an error at the first dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm1 for an error at the second dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm2 for an error at the third dimm at either
+	csrow0, csrow2  or csrow3;
+
+4) Standard error counters
+
+   The standard error counters are generated when an mcelog error is received
+   by the driver. Since, with udimm, this is counted by software, it is
+   possible that some errors could be lost. With rdimm's, they displays the
+   contents of the registers
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 672be01..1571c0c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -578,15 +578,6 @@
 
 ----------------------------
 
-What: 	"acpi=ht" boot option
-When:	2.6.35
-Why:	Useful in 2003, implementation is a hack.
-	Generally invoked by accident today.
-	Seen as doing more harm than good.
-Who:	Len Brown <len.brown@intel.com>
-
-----------------------------
-
 What:	iwlwifi 50XX module parameters
 When:	2.6.40
 Why:	The "..50" modules parameters were used to configure 5000 series and
@@ -656,3 +647,10 @@
 
 ----------------------------
 
+What:	The acpi_sleep=s4_nonvs command line option
+When:	2.6.37
+Files:	arch/x86/kernel/acpi/sleep.c
+Why:	superseded by acpi_sleep=nonvs
+Who:	Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index d8119e9..96d0df2 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,11 +794,6 @@
 
 Roadmap:
 
-2.6.35 Inclusion in mainline as an experimental mount option
-	=> approximately 2-3 months to merge window
-	=> needs to be in xfs-dev tree in 4-6 weeks
-	=> code is nearing readiness for review
-
 2.6.37 Remove experimental tag from mount option
 	=> should be roughly 6 months after initial merge
 	=> enough time to:
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 9878f50..7bff3e4 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -131,17 +131,6 @@
 	Don't check for double mounted file systems using the file system uuid.
 	This is useful to mount LVM snapshot volumes.
 
-  osyncisosync
-	Make O_SYNC writes implement true O_SYNC.  WITHOUT this option,
-	Linux XFS behaves as if an "osyncisdsync" option is used,
-	which will make writes to files opened with the O_SYNC flag set
-	behave as if the O_DSYNC flag had been used instead.
-	This can result in better performance without compromising
-	data safety.
-	However if this option is not in effect, timestamp updates from
-	O_SYNC writes can be lost if the system crashes.
-	If timestamp updates are critical, use the osyncisosync option.
-
   uquota/usrquota/uqnoenforce/quota
 	User disk quota accounting enabled, and limits (optionally)
 	enforced.  Refer to xfs_quota(8) for further details.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1808f11..b61f89f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -93,6 +93,7 @@
 			Documentation/scsi/.
 	SECURITY Different security models are enabled.
 	SELINUX SELinux support is enabled.
+	APPARMOR AppArmor support is enabled.
 	SERIAL	Serial support is enabled.
 	SH	SuperH architecture is enabled.
 	SMP	The kernel is an SMP kernel.
@@ -254,8 +255,8 @@
 			control method, with respect to putting devices into
 			low power states, to be enforced (the ACPI 2.0 ordering
 			of _PTS is used by default).
-			s4_nonvs prevents the kernel from saving/restoring the
-			ACPI NVS memory during hibernation.
+			nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during suspend/hibernation and resume.
 			sci_force_enable causes the kernel to set SCI_EN directly
 			on resume from S1/S3 (which is against the ACPI spec,
 			but some broken systems don't work without it).
@@ -1265,7 +1266,7 @@
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
-	lmb=debug	[KNL] Enable lmb debug messages.
+	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/blockdev/ramdisk.txt.
@@ -2048,7 +2049,9 @@
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.
@@ -2310,6 +2313,13 @@
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
+	apparmor=	[APPARMOR] Disable or enable AppArmor at boot time
+			Format: { "0" | "1" }
+			See security/apparmor/Kconfig help text
+			0 -- disable.
+			1 -- enable.
+			Default value is set via kernel config option.
+
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]
diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
index b3a232c..200a2d3 100644
--- a/Documentation/tomoyo.txt
+++ b/Documentation/tomoyo.txt
@@ -3,8 +3,8 @@
 TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
 
 LiveCD-based tutorials are available at
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/
+http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ .
 Though these tutorials use non-LSM version of TOMOYO, they are useful for you
 to know what TOMOYO is.
 
@@ -13,12 +13,12 @@
 Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
 kernel's command line.
 
-Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+Please see http://tomoyo.sourceforge.jp/2.3/ for details.
 
 --- Where is documentation? ---
 
 User <-> Kernel interface documentation is available at
-http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+http://tomoyo.sourceforge.jp/2.3/policy-reference.html .
 
 Materials we prepared for seminars and symposiums are available at
 http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
@@ -50,6 +50,6 @@
 SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
 
 We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
-version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ .
 LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
 to port non-LSM version's functionalities to LSM versions.
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 070f257..1387a69 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -176,5 +176,6 @@
 175 -> Leadtek Winfast DTV1000S                 [107d:6655]
 176 -> Beholder BeholdTV 505 RDS                [0000:5051]
 177 -> Hawell HW-404M7
-179 -> Beholder BeholdTV H7			[5ace:7190]
-180 -> Beholder BeholdTV A7			[5ace:7090]
+178 -> Beholder BeholdTV H7                     [5ace:7190]
+179 -> Beholder BeholdTV A7                     [5ace:7090]
+180 -> Avermedia M733A                          [1461:4155,1461:4255]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 9b2e0dd..e67c1db 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -82,3 +82,4 @@
 tuner=82 - Philips CU1216L
 tuner=83 - NXP TDA18271
 tuner=84 - Sony BTF-Pxn01Z
+tuner=85 - Philips FQ1236 MK5
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 8f3f5d3..f13eb03 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -290,6 +290,7 @@
 sonixj		0c45:6040	Speed NVC 350K
 sonixj		0c45:607c	Sonix sn9c102p Hv7131R
 sonixj		0c45:60c0	Sangha Sn535
+sonixj		0c45:60ce	USB-PC-Camera-168 (TALK-5067)
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index 41c95cc..17ddd82 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -125,6 +125,11 @@
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 indydog:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
diff --git a/MAINTAINERS b/MAINTAINERS
index a73dd80..33606bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -896,11 +896,13 @@
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-s5p/
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1148,7 +1150,7 @@
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1160,18 +1162,18 @@
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
-L:	kernel@avr32linux.org
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
@@ -1581,7 +1583,7 @@
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -1731,7 +1733,7 @@
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-M:	Andy Walls <awalls@radix.net>
+M:	Andy Walls <awalls@md.metrocast.net>
 L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2109,11 +2111,20 @@
 
 EDAC-I5400
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7CORE
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7core_edac.c
+F:	drivers/edac/edac_mce.c
+F:	include/linux/edac_mce.h
+
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvind@jetztechnologies.com>
@@ -2887,6 +2898,13 @@
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -2978,22 +2996,14 @@
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M:	Zhu Yi <yi.zhu@intel.com>
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2100.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M:	Zhu Yi <yi.zhu@intel.com>
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2200.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
@@ -3019,8 +3029,8 @@
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Zhu Yi <yi.zhu@intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://intellinuxwireless.org
@@ -3030,7 +3040,6 @@
 
 INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi)
 M:	Samuel Ortiz <samuel.ortiz@intel.com>
-M:	Zhu Yi <yi.zhu@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
@@ -3165,7 +3174,7 @@
 F:	drivers/hwmon/it87.c
 
 IVTV VIDEO4LINUX DRIVER
-M:	Andy Walls <awalls@radix.net>
+M:	Andy Walls <awalls@md.metrocast.net>
 L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -3382,7 +3391,7 @@
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
-M:	Masami Hiramatsu <mhiramat@redhat.com>
+M:	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -4215,6 +4224,7 @@
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	devicetree-discuss@lists.ozlabs.org
 W:	http://fdt.secretlab.ca
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
@@ -4629,6 +4639,12 @@
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
+QLOGIC QLA1280 SCSI DRIVER
+M:	Michael Reed <mdr@sgi.com>
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/qla1280.[ch]
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5045,6 +5061,14 @@
 F:	include/linux/selinux*
 F:	security/selinux/
 
+APPARMOR SECURITY MODULE
+M:	John Johansen <john.johansen@canonical.com>
+L:	apparmor@lists.ubuntu.com (subscribers-only, general discussion)
+W:	apparmor.wiki.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
+S:	Supported
+F:	security/apparmor/
+
 SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
@@ -5320,6 +5344,7 @@
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
+F:	drivers/sbus
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
@@ -5387,6 +5412,7 @@
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/
@@ -5587,7 +5613,7 @@
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
 W:	http://tomoyo.sourceforge.jp/
-T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/
+T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.3.x/tomoyo-lsm/patches/
 S:	Maintained
 F:	security/tomoyo/
 
@@ -6225,6 +6251,8 @@
 
 WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
+L:	linux-watchdog@vger.kernel.org
+W:	http://www.linux-watchdog.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
diff --git a/Makefile b/Makefile
index efdc3d0..141da26 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -883,80 +883,10 @@
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-#	$(KERNELVERSION)
-#	  $(VERSION)			eg, 2
-#	  $(PATCHLEVEL)			eg, 6
-#	  $(SUBLEVEL)			eg, 18
-#	  $(EXTRAVERSION)		eg, -rc6
-#	$(localver-full)
-#	  $(localver)
-#	    localversion*		(files without backups, containing '~')
-#	    $(CONFIG_LOCALVERSION)	(from kernel config setting)
-#	  $(LOCALVERSION)		(from make command line, if provided)
-#	  $(localver-extra)
-#	    $(scm-identifier)		(unique SCM tag, if one exists)
-#	      ./scripts/setlocalversion	(only with CONFIG_LOCALVERSION_AUTO)
-#	      .scmversion		(only with CONFIG_LOCALVERSION_AUTO)
-#	    +				(only without CONFIG_LOCALVERSION_AUTO
-#					 and without LOCALVERSION= and
-#					 repository is at non-tagged commit)
-#
-# For kernels without CONFIG_LOCALVERSION_AUTO compiled from an SCM that has
-# been revised beyond a tagged commit, `+' is appended to the version string
-# when not overridden by using "make LOCALVERSION=".  This indicates that the
-# kernel is not a vanilla release version and has been modified.
-
-pattern = ".*/localversion[^~]*"
-string  = $(shell cat /dev/null \
-	   `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
-			      $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# scripts/setlocalversion is called to create a unique identifier if the source
-# is managed by a known SCM and the repository has been revised since the last
-# tagged (release) commit.  The format of the identifier is determined by the
-# SCM's implementation.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifeq ($(wildcard .scmversion),)
-        scm-identifier = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
-else
-        scm-identifier = $(shell cat .scmversion 2> /dev/null)
-endif
-
-ifdef CONFIG_LOCALVERSION_AUTO
-	localver-extra = $(scm-identifier)
-else
-	ifneq ($(scm-identifier),)
-		ifeq ($(LOCALVERSION),)
-			localver-extra = +
-		endif
-	endif
-endif
-
-localver-full = $(localver)$(LOCALVERSION)$(localver-extra)
-
 # Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
 include/config/kernel.release: include/config/auto.conf FORCE
 	$(Q)rm -f $@
-	$(Q)echo $(kernelrelease) > $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
 
 
 # Things we need to do before we recursively start building the kernel
@@ -1095,7 +1025,7 @@
 #	using awk while concatenating to the final file.
 
 PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
 	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
 	@$(kecho) '  Building modules, stage 2.';
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
@@ -1117,7 +1047,7 @@
 modules_install: _modinst_ _modinst_post
 
 PHONY += _modinst_
-_modinst_: modules.builtin
+_modinst_:
 	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
 		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 1dce24b..adfab8a 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -410,7 +410,7 @@
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 7739a624..5a62fb4 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -35,7 +35,7 @@
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support
diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
deleted file mode 100644
index 342b56d..0000000
--- a/arch/alpha/kernel/ns87312.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 0000000..27dcbff
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 0000000..25e1695
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index a5fffc8..738fc82 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -53,7 +53,6 @@
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index d4327e4..85b4aea 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1f254bd..e39caa8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,6 +10,7 @@
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -24,6 +25,7 @@
 	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -55,7 +57,7 @@
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	depends on GENERIC_CLOCKEVENTS
-	default y if SMP && !LOCAL_TIMERS
+	default y if SMP
 
 config HAVE_TCM
 	bool
@@ -301,6 +303,7 @@
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
@@ -439,21 +442,6 @@
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_L7200
-	bool "LinkUp-L7200"
-	select CPU_ARM720T
-	select FIQ
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Say Y here if you intend to run this kernel on a LinkUp Systems
-	  L7200 Software Development Board which uses an ARM720T processor.
-	  Information on this board can be obtained at:
-
-	  <http://www.linkupsys.com/>
-
-	  If you have any questions or comments about the Linux kernel port
-	  to this board, send e-mail to <sjhill@cotw.com>.
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
@@ -482,6 +470,19 @@
 	help
 	  Support for the Marvell Loki (88RC8480) SoC.
 
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_IDE
+	select ARM_AMBA
+	select USB_ARCH_HAS_OHCI
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for the NXP LPC32XX family of processors
+
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	select CPU_FEROCEON
@@ -586,6 +587,7 @@
 	bool "Qualcomm MSM"
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -719,7 +721,6 @@
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
-	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_USES_GETTIMEOFFSET
 	help
@@ -845,6 +846,8 @@
 
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-lpc32xx/Kconfig"
+
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -955,7 +958,8 @@
 	default y
 
 config CPU_HAS_PMU
-	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool
 
@@ -1030,11 +1034,6 @@
 
 source "arch/arm/common/Kconfig"
 
-config FORCE_MAX_ZONEORDER
-	int
-	depends on SA1111
-	default "9"
-
 menu "Bus support"
 
 config ARM_AMBA
@@ -1059,7 +1058,7 @@
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1171,9 +1170,10 @@
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1184,10 +1184,10 @@
 
 config HZ
 	int
-	default 128 if ARCH_L7200
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
+	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100
 
 config THUMB2_KERNEL
@@ -1240,10 +1240,6 @@
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
 
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
@@ -1251,13 +1247,7 @@
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
-	int
-	default "4" if ARCH_LH7A40X
-	default "2"
-	depends on NEED_MULTIPLE_NODES
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
 	bool "High Memory Support (EXPERIMENTAL)"
@@ -1289,8 +1279,33 @@
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SPARSE_IRQ
+	def_bool n
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
 source "mm/Kconfig"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order" if ARCH_SHMOBILE
+	range 11 64 if ARCH_SHMOBILE
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
@@ -1374,6 +1389,24 @@
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+	  This feature requires gcc version 4.2 or above.
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
 endmenu
 
 menu "Boot options"
@@ -1484,6 +1517,105 @@
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
+config AUTO_ZRELADDR
+	bool "Auto calculation of the decompressed kernel image address"
+	depends on !ZBOOT_ROM && !ARCH_U300
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. If AUTO_ZRELADDR is selected, the address
+	  will be determined at run-time by masking the current IP with
+	  0xf8000000. This assumes the zImage being placed in the first 128MB
+	  from start of memory.
+
+config ZRELADDR
+	hex "Physical address of the decompressed kernel image"
+	depends on !AUTO_ZRELADDR
+	default 0x00008000 if ARCH_BCMRING ||\
+		ARCH_CNS3XXX ||\
+		ARCH_DOVE ||\
+		ARCH_EBSA110 ||\
+		ARCH_FOOTBRIDGE ||\
+		ARCH_INTEGRATOR ||\
+		ARCH_IOP13XX ||\
+		ARCH_IOP33X ||\
+		ARCH_IXP2000 ||\
+		ARCH_IXP23XX ||\
+		ARCH_IXP4XX ||\
+		ARCH_KIRKWOOD ||\
+		ARCH_KS8695 ||\
+		ARCH_LOKI ||\
+		ARCH_MMP ||\
+		ARCH_MV78XX0 ||\
+		ARCH_NOMADIK ||\
+		ARCH_NUC93X ||\
+		ARCH_NS9XXX ||\
+		ARCH_ORION5X ||\
+		ARCH_SPEAR3XX ||\
+		ARCH_SPEAR6XX ||\
+		ARCH_U8500 ||\
+		ARCH_VERSATILE ||\
+		ARCH_W90X900
+	default 0x08008000 if ARCH_MX1 ||\
+		ARCH_SHARK
+	default 0x10008000 if ARCH_MSM ||\
+		ARCH_OMAP1 ||\
+		ARCH_RPC
+	default 0x20008000 if ARCH_S5P6440 ||\
+		ARCH_S5P6442 ||\
+		ARCH_S5PC100 ||\
+		ARCH_S5PV210
+	default 0x30008000 if ARCH_S3C2410 ||\
+		ARCH_S3C2400 ||\
+		ARCH_S3C2412 ||\
+		ARCH_S3C2416 ||\
+		ARCH_S3C2440 ||\
+		ARCH_S3C2443
+	default 0x40008000 if ARCH_STMP378X ||\
+		ARCH_STMP37XX ||\
+		ARCH_SH7372 ||\
+		ARCH_SH7377
+	default 0x50008000 if ARCH_S3C64XX ||\
+		ARCH_SH7367
+	default 0x60008000 if ARCH_VEXPRESS
+	default 0x80008000 if ARCH_MX25 ||\
+		ARCH_MX3 ||\
+		ARCH_NETX ||\
+		ARCH_OMAP2PLUS ||\
+		ARCH_PNX4008
+	default 0x90008000 if ARCH_MX5 ||\
+		ARCH_MX91231
+	default 0xa0008000 if ARCH_IOP32X ||\
+		ARCH_PXA ||\
+		MACH_MX27
+	default 0xc0008000 if ARCH_LH7A40X ||\
+		MACH_MX21
+	default 0xf0008000 if ARCH_AAEC2000 ||\
+		ARCH_L7200
+	default 0xc0028000 if ARCH_CLPS711X
+	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
+	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
+	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
+	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
+	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
+	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
+	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
+	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
+	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
+	default 0xc0208000 if ARCH_SA1100 && SA1111
+	default 0xc0008000 if ARCH_SA1100 && !SA1111
+	default 0x30108000 if ARCH_S3C2410 && PM_H1940
+	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
+	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. ZRELADDR has to be specified when the
+	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
+	  selected.
+
 endmenu
 
 menu "CPU Power Management"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313..63d998e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -34,6 +34,10 @@
 KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
 
+ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
+KBUILD_CFLAGS	+=-fstack-protector
+endif
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 AS		+= -EB
@@ -139,14 +143,14 @@
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_L7200)		:= l7200
 machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
 machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_MX1)		:= mx1
-machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX1)		:= imx
+machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_MX5)		:= mx5
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4..f705213 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,18 +14,16 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
+-include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+export INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -67,7 +65,7 @@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(ZRELADDR)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 53faa90..7636c9b 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -19,10 +20,6 @@
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS		+= head-l7200.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
@@ -71,6 +68,9 @@
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
 		 font.o font.c head.o misc.o $(OBJS)
 
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
@@ -79,19 +79,9 @@
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
-# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
-# linker symbols.  We only define initrd_phys and params_phys if the
-# machine class defined the corresponding makefile variable.
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-ifneq ($(INITRD_PHYS),)
-LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
-endif
-ifneq ($(PARAMS_PHYS),)
-LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
-endif
 # ?
 LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
deleted file mode 100644
index 491a037..0000000
--- a/arch/arm/boot/compressed/Makefile.debug
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# linux/arch/arm/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-COMPRESSED_EXTRA=../../lib/ll_char_wr.o
-OBJECTS=misc-debug.o ll_char_wr.aout.o
-
-CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
-
-test-gzip: piggy.aout.o $(OBJECTS)
-	$(CC) -o $@ $(OBJECTS) piggy.aout.o
-
-misc-debug.o: misc.c
-	$(CC) $(CFLAGS) -o $@ misc.c
-
-piggy.aout.o: piggy.o
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
-
-ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
-
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
deleted file mode 100644
index d0e3b20..0000000
--- a/arch/arm/boot/compressed/head-l7200.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * linux/arch/arm/boot/compressed/head-l7200.S
- * 
- * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
- * 
- * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
- * is merged with head.S by the linker.
- */
-
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_ARCH_L7200
-#error What am I doing here...
-#endif
-
-		.section        ".start", "ax"
-
-__L7200_start:
-		mov	r0, #0x00100000		@ FLASH address of initrd
-		mov	r2, #0xf1000000		@ RAM address of initrd
-		add	r3, r2, #0x00700000	@ Size of initrd 
-1:
-		ldmia   r0!, {r4, r5, r6, r7}
-		stmia   r2!, {r4, r5, r6, r7}
-		cmp	r2, r3
-		ble	1b
-
-		mov	r8, #0			@ Zero it out
-		mov	r7, #MACH_TYPE_L7200	@ Set architecture ID
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5191b1..abf4d65 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,9 +170,16 @@
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
+ ARM(		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip, sp})
+ THUMB(		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip}	)
  THUMB(		ldr	sp, [r0, #32]				)
+#ifdef CONFIG_AUTO_ZRELADDR
+		@ determine final kernel image address
+		and	r4, pc, #0xf8000000
+		add	r4, r4, #TEXT_OFFSET
+#else
+		ldr	r4, =CONFIG_ZRELADDR
+#endif
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -310,18 +317,17 @@
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	zreladdr		@ r4
 		.word	_start			@ r5
 		.word	_image_size		@ r6
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	user_stack+4096		@ sp
+		.word	user_stack_end		@ sp
 LC1:		.word	reloc_end - reloc_start
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
-params:		ldr	r0, =params_phys
+params:		ldr	r0, =0x10000100		@ params_phys for RPC
 		mov	pc, lr
 		.ltorg
 		.align
@@ -339,9 +345,8 @@
  *  r4 = kernel execution address
  *  r7 = architecture number
  *  r8 = atags pointer
- *  r9 = run-time address of "start"  (???)
  * On exit,
- *  r1, r2, r3, r9, r10, r12 corrupted
+ *  r0, r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
  *  r4, r5, r6, r7, r8
  */
@@ -396,12 +401,18 @@
 
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		/*
+		 * ?? ARMv3 MMU does not allow reading the control register,
+		 * does this really work on ARMv3 MPU?
+		 */
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 						@ .... .... .... WC.M
 		orr	r0, r0, #0x000d		@ .... .... .... 11.1
+		/* ?? this overwrites the value constructed above? */
 		mov	r0, #0
 		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
 
+		/* ?? invalidate for the second time? */
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
@@ -771,8 +782,10 @@
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On exit, r0, r1, r2, r3, r9, r12 corrupted
- * This routine must preserve: r4, r6, r7
+ * On exit,
+ *  r0, r1, r2, r3, r9, r12 corrupted
+ * This routine must preserve:
+ *  r4, r6, r7
  */
 		.align	5
 cache_off:	mov	r3, #12			@ cache_off function
@@ -845,7 +858,7 @@
  * Clean and flush the cache to maintain consistency.
  *
  * On exit,
- *  r1, r2, r3, r9, r11, r12 corrupted
+ *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -988,7 +1001,7 @@
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
 /*
@@ -1001,6 +1014,7 @@
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
 
+@ phex corrupts {r0, r1, r2, r3}
 phex:		adr	r3, phexbuf
 		mov	r2, #0
 		strb	r2, [r3, r1]
@@ -1015,6 +1029,7 @@
 		strb	r2, [r3, r1]
 		b	1b
 
+@ puts corrupts {r0, r1, r2, r3}
 puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
@@ -1029,12 +1044,14 @@
 		teq	r0, #0
 		bne	1b
 		mov	pc, lr
+@ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
 		mov	r0, #0
 		loadsp	r3, r1
 		b	2b
 
+@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
 memdump:	mov	r12, r0
 		mov	r10, lr
 		mov	r11, #0
@@ -1070,3 +1087,4 @@
 		.align
 		.section ".stack", "w"
 user_stack:	.space	4096
+user_stack_end:
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d2b2ef4..e653a6d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -28,9 +28,6 @@
 
 #include <asm/unaligned.h>
 
-#ifdef STANDALONE_DEBUG
-#define putstr printf
-#else
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -116,7 +113,6 @@
 	flush();
 }
 
-#endif
 
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
@@ -186,7 +182,6 @@
 
 extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
-#ifndef STANDALONE_DEBUG
 
 unsigned long
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
@@ -211,18 +206,3 @@
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
-#else
-
-char output_buffer[1500*1024];
-
-int main()
-{
-	output_data = output_buffer;
-
-	putstr("Uncompressing Linux...");
-	decompress(input_data, input_data_end - input_data,
-			NULL, NULL, output_data, NULL, error);
-	putstr("done.\n");
-	return 0;
-}
-#endif
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 337741f..7dfa9a8 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -108,6 +108,51 @@
 	spin_unlock(&irq_controller_lock);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(irq);
+	unsigned int gicirq = gic_irq(irq);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	spin_lock(&irq_controller_lock);
+
+	val = readl(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -161,6 +206,7 @@
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
+	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index a52a27c..517d50d 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -185,13 +185,10 @@
 	},
 };
 
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = SZ_1M >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
@@ -951,8 +948,6 @@
 	if (!save)
 		return 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-
 	/*
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
@@ -969,6 +964,13 @@
 	 * First of all, wake up the chip.
 	 */
 	sa1111_wake(sachip);
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 
@@ -1023,13 +1025,12 @@
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-
 #ifdef CONFIG_PM
 		kfree(sachip->saved_state);
 		sachip->saved_state = NULL;
 #endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
 	}
 
 	return 0;
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
index 6e32a85..92b0f90 100644
--- a/arch/arm/configs/acs5k_defconfig
+++ b/arch/arm/configs/acs5k_defconfig
@@ -1,1232 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Dec 16 13:31:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
index b34b1ea..2a27a14 100644
--- a/arch/arm/configs/acs5k_tiny_defconfig
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -1,940 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Jan  6 13:23:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
-# CONFIG_MACH_KS8695 is not set
-# CONFIG_MACH_DSM320 is not set
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 64fe7f1..2afdf67 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -1,1258 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Tue Aug 12 22:30:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_AFEB9260=y
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
 CONFIG_RTC_DRV_FM3130=y
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 30927ca..5536c48 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,1148 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun Apr 20 00:29:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="gum"
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
 CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_MACH_GUMSTIX_F=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=2
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_VIRTUAL=m
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
index e4f4fb5..ad2bc50 100644
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,1377 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Wed Oct 28 15:47:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
 CONFIG_MACH_OMAP3517EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=y
 CONFIG_CAN_DEV=y
 CONFIG_CAN_CALC_BITTIMING=y
 CONFIG_CAN_TI_HECC=y
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
 CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 6d8a0c8..75de45e 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -1,906 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 04:28:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=m
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
 CONFIG_MACH_AMS_DELTA=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
 CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_AMS_DELTA=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_AMS_DELTA=y
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
@@ -908,418 +84,38 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_AMS_DELTA=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
index e14229b..2eef85e 100644
--- a/arch/arm/configs/ap4evb_defconfig
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:25:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
-# CONFIG_ARCH_SH7377 is not set
 CONFIG_ARCH_SH7372=y
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_AP4EVB=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index daa75bc..558ecd8 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 13:13:30 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_SA1100_FIR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
index 76d724b..695e32d 100644
--- a/arch/arm/configs/at572d940hfek_defconfig
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -1,452 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec  5 10:58:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-AT572D940HF"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
 CONFIG_ARCH_AT572D940HF=y
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT572D940HF Board Type
-#
 CONFIG_MACH_AT572D940HFEB=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-CONFIG_NUM_SERIAL=3
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=1
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_BLOCK_RO=m
 CONFIG_FTL=m
@@ -456,162 +72,52 @@
 CONFIG_RFD_FTL=m
 CONFIG_SSFDC=m
 CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
 CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
 CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_ATMEL is not set
 CONFIG_MTD_NAND_NANDSIM=m
 CONFIG_MTD_NAND_PLATFORM=m
 CONFIG_MTD_ALAUDA=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -620,10 +126,6 @@
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -633,809 +135,198 @@
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
 CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
 CONFIG_MOUSE_VSXXXAA=m
 CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
 CONFIG_SPECIALIX=m
-CONFIG_RIO=m
-# CONFIG_RIO_OLDPCI is not set
 CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=m
 CONFIG_R3964=m
 CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
 CONFIG_TCG_TPM=m
 CONFIG_TCG_NSC=m
 CONFIG_TCG_ATMEL=m
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_DS1682=m
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_BITBANG=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_AT25=m
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_PCM_OSS_PLUGINS is not set
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_AT73C213 is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
 CONFIG_RTC_DRV_DS1305=y
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
 CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_CHECK=y
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
-# CONFIG_UBIFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
@@ -1443,198 +334,25 @@
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
 CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_SECURITYFS=y
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index b1ab50b..ffb1edd 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -1,1218 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 22:55:57 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91CAP9=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91CAP9 Board Type
-#
 CONFIG_MACH_AT91CAP9ADK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 1fffec8..4438e64 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -1,1009 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:54:30 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_ECO920=y
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index c846a79..ccd517c 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -1,997 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:57:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
 CONFIG_MACH_AT91RM9200EK=y
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 472ea11..f8a9226 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,1039 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:20:50 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
 CONFIG_MACH_AT91SAM9260EK=y
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4ecde42..b46025b 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,1178 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:21:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
 CONFIG_ARCH_AT91SAM9261=y
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9261 Board Type
-#
 CONFIG_MACH_AT91SAM9261EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_INTSRAM is not set
-# CONFIG_FB_ATMEL_STN is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 9b792b6..8a04d6f 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,1207 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:12:20 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
 CONFIG_MACH_AT91SAM9263EK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_AT91=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 64ce106..f1bac70 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,1167 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Jun 10 15:51:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
 CONFIG_MACH_AT91SAM9G20EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_AT91_SLOW_CLOCK is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_AT91_AC97 is not set
-
-#
-# SPI devices
-#
 CONFIG_SND_AT73C213=y
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 90e48bf..75621e4 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -1,946 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:24:14 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
 CONFIG_ARCH_AT91SAM9RL=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9RL Board Type
-#
 CONFIG_MACH_AT91SAM9RLEK=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 6315534..1b0e9a1 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1,1311 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:53:18 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_ATEB9200=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=m
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_NET1080=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b175b6b..3a1ad15 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,1242 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 19:00:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
 CONFIG_SA1100_BADGE4=y
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ARTHUR=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=y
 CONFIG_IRCOMM=y
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=y
-# CONFIG_VIA_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
 CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
 CONFIG_BT_HCIVHCI=m
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_PARPORT=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=y
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_KC2190=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ELEKTOR=m
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
+CONFIG_SOUND=y
+CONFIG_SOUND_PRIME=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
 CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
 CONFIG_USB_RIO500=m
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 6ac6693..75984cd 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -1,800 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Mon Mar 29 12:01:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
 CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
 CONFIG_ARCH_BCMRING=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_FPGA11107 is not set
-CONFIG_ARCH_BCM11107=y
-
-#
-# BCMRING Options
-#
 CONFIG_BCM_ZRELADDR=0x8000
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0e000000
 CONFIG_ZBOOT_ROM_BSS=0x0ea00000
 CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BCM_UMI=y
 CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
 # CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index eef33de..cedc92e 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -1,554 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Mar  6 10:07:26 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
 CONFIG_MACH_CAM60=y
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0x20004000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -557,671 +77,98 @@
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index b6a7063..ac64dbd 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -1,723 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue Jun 14 12:05:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
 CONFIG_MACH_CARMEVA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-CONFIG_ARM_AT91_ETHER_RMII=y
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_NFSD=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index d662cab..dce912d 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -1,902 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 14:19:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
-# CONFIG_SA1100_CERF_FLASH_32MB is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_IDE=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 032b49ba..8bb0633 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -1,1732 +1,157 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 17:10:40 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
 CONFIG_MACH_CM_T35=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 47d22d0..dcfbcf3 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,1369 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:31:36 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
 CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=m
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_ENE_TUNE is not set
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
 CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_UCB1400_CORE=m
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 # CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1373,589 +136,54 @@
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index a334069..921e56a 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,446 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 19:03:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-cm-x300"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA3xx=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -450,1304 +48,141 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_WACOM=m
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index d5c0881..313627a 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -1,831 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Sun May  2 21:58:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=m
-# CONFIG_CFQ_GROUP_IOSCHED is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
 CONFIG_ARCH_CNS3XXX=y
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# CNS3XXX platform type
-#
 CONFIG_MACH_CNS3420VB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_GIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=20000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
 # CONFIG_ATA_SFF is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
 CONFIG_FSCACHE=y
-# CONFIG_FSCACHE_STATS is not set
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
-# CONFIG_FSCACHE_OBJECT_LIST is not set
-# CONFIG_CACHEFILES is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index c962870..f52c64e 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,443 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
 CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -447,1290 +53,128 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=y
-CONFIG_LIB80211_CRYPT_CCMP=y
-CONFIG_LIB80211_CRYPT_TKIP=y
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 11fdb5a..b985334 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -1,1155 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:13:20 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
 CONFIG_MACH_COLIBRI300=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_AX88796=y
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 26e458d..310f9a6 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,959 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Fri Apr 14 19:09:52 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
 CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 5e4069f..4a1fa81 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,542 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:12:23 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_AKITA is not set
-# CONFIG_MACH_SPITZ is not set
-# CONFIG_MACH_BORZOI is not set
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-# CONFIG_TOSA_BT is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -546,18 +77,9 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -566,848 +88,107 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1415,479 +196,79 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index c9137aa..bbf729e 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -1,1337 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:57:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_AFEB9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
 CONFIG_MACH_CPU9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index d234479..e7d7942 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -1,1327 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 15:03:43 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
 CONFIG_MACH_CPU9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
index 1f8dda6..022aeb5 100644
--- a/arch/arm/configs/cpuat91_defconfig
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -1,1315 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:45:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
 CONFIG_MACH_CPUAT91=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index f095040d..a24c448 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1,863 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:19:24 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
 CONFIG_MACH_CSB337=y
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
-# CONFIG_MACH_HOMEMATIC is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_SWEDATMS is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=128
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -871,345 +83,22 @@
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_AT91 is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
 # CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 5071540..98552ad 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -1,937 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Fri Apr  4 22:06:15 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
 CONFIG_MACH_CSB637=y
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -945,276 +79,20 @@
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index e14c99c..ba66705 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,1331 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DA8XX=y
-# CONFIG_ARCH_DAVINCI_DM365 is not set
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
-CONFIG_DA830_UI_LCD=y
-# CONFIG_DA830_UI_NAND is not set
-CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
-CONFIG_DA850_UI_NONE=y
-# CONFIG_DA850_UI_RMII is not set
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_DAVINCI is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_DA8XX=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_SND_DA830_SOC_EVM is not set
-# CONFIG_SND_DA850_SOC_EVM is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 625035f..2519cc5 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,1835 +1,194 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Mon Oct 12 14:13:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_AINTC=y
-CONFIG_ARCH_DAVINCI_DMx=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-# CONFIG_ARCH_DAVINCI_DA830 is not set
-# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_DAVINCI_DM6467_EVM=y
-CONFIG_MACH_DAVINCI_DM365_EVM=y
-CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_DAVINCI=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
 CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_DM355EVM=m
-CONFIG_INPUT_DM365EVM=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_DAVINCI_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 CONFIG_MFD_DM355EVM_MSP=y
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_DAVINCI_SOC_EVM=m
 CONFIG_SND_DM6467_SOC_EVM=m
-# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# DaVinci 35x and 644x USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_DAVINCI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_DM355EVM is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
index c7a6820..786cbe4 100644
--- a/arch/arm/configs/devkit8000_defconfig
+++ b/arch/arm/configs/devkit8000_defconfig
@@ -1,1914 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Wed Mar 24 13:27:25 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_DEVKIT8000=y
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=y
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
 CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index b7b2ab0..9359e1b 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,1619 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:53:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_DOVE=y
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Dove Implementations
-#
 CONFIG_MACH_DOVE_DB=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
index d5e8279..c319418 100644
--- a/arch/arm/configs/ebsa110_defconfig
+++ b/arch/arm/configs/ebsa110_defconfig
@@ -1,747 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 18:29:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 CONFIG_ARCH_EBSA110=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
 CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
 CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
 CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
 CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_MARK=y
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_MATCH_RT=y
 CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_FW_LOADER=m
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_AM79C961A=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 25dd53b..6bb6abd 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -1,1313 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jun  9 01:30:18 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
 CONFIG_MACH_ECBAT91=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91RM9200_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_AT91_SPI is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ATMEL is not set
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_AT91=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig
index e3a6cd3..7b62be1 100644
--- a/arch/arm/configs/edb7211_defconfig
+++ b/arch/arm/configs/edb7211_defconfig
@@ -1,573 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:48:12 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
 CONFIG_ARCH_EDB7211=y
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_ARCH_EP7211=y
-# CONFIG_EP72XX_ROM_BOOT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 2bee932..d7db34f 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,1140 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:43:31 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
 CONFIG_MACH_EM_X270=y
 CONFIG_MACH_EXEDA=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
 CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_MBX_DEBUG is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1144,597 +136,59 @@
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 35d735e..6d6689c 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,1464 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Tue May 19 12:26:49 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Cirrus EP93xx Implementation Options
-#
 CONFIG_CRUNCH=y
-
-#
-# EP93xx Platforms
-#
-# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
-CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB93XX=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9=y
 CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
 CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_TS7250 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_EP93XX=y
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 74baf57..1691dea 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,1246 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Wed Dec 24 23:35:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_E330=y
-CONFIG_MACH_E350=y
-CONFIG_MACH_E740=y
-CONFIG_MACH_E750=y
-CONFIG_MACH_E400=y
-CONFIG_MACH_E800=y
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_PXA_FICP=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_MFD_TMIO=y
 CONFIG_MFD_T7L66XB=y
 CONFIG_MFD_TC6387XB=y
 CONFIG_MFD_TC6393XB=y
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 9e9057c..c4eeb6d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,451 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Mon Nov  2 13:18:50 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
-CONFIG_MACH_EZX_A780=y
-CONFIG_MACH_EZX_E680=y
-CONFIG_MACH_EZX_A1200=y
-CONFIG_MACH_EZX_A910=y
-CONFIG_MACH_EZX_E6=y
-CONFIG_MACH_EZX_E2=y
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -458,22 +77,12 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -484,21 +93,15 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -506,15 +109,7 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -526,21 +121,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -549,10 +133,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -570,38 +150,7 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -611,192 +160,42 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -804,289 +203,38 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_PCAP=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_PCAP=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1105,650 +253,96 @@
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
 CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_RTC_DRV_PCAP=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1787,214 +381,40 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 04d9793..4f925ea 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -1,234 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:02:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
 CONFIG_ARCH_CATS=y
 CONFIG_ARCH_PERSONAL_SERVER=y
-# CONFIG_ARCH_EBSA285_ADDIN is not set
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-CONFIG_ARCH_EBSA285=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_ATM=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=y
-
-#
-# Parallel IDE high-level drivers
-#
 CONFIG_PARIDE_PD=m
 CONFIG_PARIDE_PCD=m
 CONFIG_PARIDE_PF=m
 CONFIG_PARIDE_PT=m
 CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
 CONFIG_PARIDE_ATEN=m
 CONFIG_PARIDE_BPCK=m
-# CONFIG_PARIDE_BPCK6 is not set
 CONFIG_PARIDE_COMM=m
 CONFIG_PARIDE_DSTR=m
 CONFIG_PARIDE_FIT2=m
 CONFIG_PARIDE_FIT3=m
 CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
 CONFIG_PARIDE_EPIA=m
 CONFIG_PARIDE_FRIQ=m
 CONFIG_PARIDE_FRPW=m
@@ -236,1019 +63,65 @@
 CONFIG_PARIDE_KTTI=m
 CONFIG_PARIDE_ON20=m
 CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-CONFIG_WINBOND_FIR=m
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_21285_WATCHDOG=m
+CONFIG_977_WATCHDOG=m
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_PRINTER=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFSD=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-# CONFIG_ACORN_PARTITION_ICS is not set
 CONFIG_ACORN_PARTITION_ADFS=y
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-# CONFIG_ACORN_PARTITION_RISCIX is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_CODEPAGE_852=m
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig
index d58142b..e11c7ea 100644
--- a/arch/arm/configs/fortunet_defconfig
+++ b/arch/arm/configs/fortunet_defconfig
@@ -1,556 +1,28 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:51:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
 CONFIG_ARCH_FORTUNET=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
index 3c19031..4a336ab 100644
--- a/arch/arm/configs/g3evm_defconfig
+++ b/arch/arm/configs/g3evm_defconfig
@@ -1,774 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:20:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
 CONFIG_ARCH_SH7367=y
-# CONFIG_ARCH_SH7377 is not set
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G3EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x50000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
index 8ee79a5..21c6d03 100644
--- a/arch/arm/configs/g4evm_defconfig
+++ b/arch/arm/configs/g4evm_defconfig
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:21:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
 CONFIG_ARCH_SH7377=y
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G4EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index a8ad8fb..317960f 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,1163 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 24 00:09:30 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index 5bb7372..ac336f1 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -1,995 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 16:13:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_MACH_H5000=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-CONFIG_USB_PXA25X_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
index 09a6c6a..bee94d2 100644
--- a/arch/arm/configs/h7201_defconfig
+++ b/arch/arm/configs/h7201_defconfig
@@ -1,565 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:11:33 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
 CONFIG_ARCH_H7201=y
-# CONFIG_ARCH_H7202 is not set
-CONFIG_CPU_H7201=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_H720X is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index fedc52b..69405a7 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -1,729 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:15:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
-# CONFIG_ARCH_H7201 is not set
 CONFIG_ARCH_H7202=y
-CONFIG_CPU_H7202=y
-# CONFIG_H7202_SERIAL23 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,19200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 CONFIG_MTD_H720X=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 2da1acf..bed8047 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,766 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 20:58:58 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
index e0ef0d1..edfa1c0 100644
--- a/arch/arm/configs/htcherald_defconfig
+++ b/arch/arm/configs/htcherald_defconfig
@@ -1,1144 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sat Dec  5 12:16:24 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 CONFIG_ARCH_OMAP850=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_HTCWIZARD is not set
 CONFIG_MACH_HERALD=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_182MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM925T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_ZLIB=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
index e7940a9..fcda057 100644
--- a/arch/arm/configs/igep0020_defconfig
+++ b/arch/arm/configs/igep0020_defconfig
@@ -1,460 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Thu Jan  7 16:14:55 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_IGEP0020=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -464,1183 +51,129 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
 CONFIG_MTD_ONENAND_2X_PROGRAM=y
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
 CONFIG_SSB=m
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=14
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
 # CONFIG_OMAP2_DSS_VENC is not set
-# CONFIG_OMAP2_DSS_SDI is not set
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
 # CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_TAAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_IGEP0020=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 21f2bff..ade55c8 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -1,491 +1,62 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Thu Apr  8 14:49:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_ARCOM_ZEUS is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_CAPC7117 is not set
-# CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_RAUMFELD_RC is not set
-# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
-# CONFIG_MACH_RAUMFELD_SPEAKER is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_ICONTROL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_CPU_HAS_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -498,23 +69,12 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -525,21 +85,15 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -547,15 +101,7 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -567,21 +113,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -590,10 +125,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -611,215 +142,40 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_IEEE802154=y
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_IEEE802154_DRIVERS=y
-# CONFIG_IEEE802154_FAKEHARD is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -827,302 +183,36 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DA9030 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1141,645 +231,89 @@
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=y
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV9640 is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_DA903X is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1818,222 +352,41 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 6b0d043..7196ade 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,862 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:14:51 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_INTEGRATOR=y
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Integrator Options
-#
 CONFIG_ARCH_INTEGRATOR_AP=y
-# CONFIG_ARCH_INTEGRATOR_CP is not set
-# CONFIG_INTEGRATOR_IMPD1 is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1022 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ICST525=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_INTEGRATOR=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 3c040cc..4fa94a1 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,1159 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:03 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_IOP13XX=y
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP13XX Implementation Options
-#
-
-#
-# IOP13XX Platform Support
-#
 CONFIG_MACH_IQ81340SC=y
 CONFIG_MACH_IQ81340MC=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfa000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 62a8549..4f2ec3ac 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,1389 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 15:49:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
 CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP32x Implementation Options
-#
-
-#
-# IOP32x Platform Types
-#
-CONFIG_MACH_EP80219=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
-CONFIG_IOP3XX_ATU=y
-# CONFIG_MACH_EM7210 is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
 CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 0bc23ec..aa36128 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,1391 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 13:41:41 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP33x Implementation Options
-#
-
-#
-# IOP33x Platform Types
-#
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 8b5b576..9083246 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,1113 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:39 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
 CONFIG_ARCH_ENP2611=y
 CONFIG_ARCH_IXDP2400=y
 CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
 CONFIG_ARCH_IXDP2401=y
 CONFIG_ARCH_IXDP2801=y
-CONFIG_MACH_IXDP28X5=y
-CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_ENP2611_MSF_NET=y
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_WATCHDOG=y
+CONFIG_IXP2000_WATCHDOG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 59c11c9..7fc056a 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,1408 +1,105 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:45 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP23xx Implementation Options
-#
-
-#
-# IXP23xx Platforms
-#
 CONFIG_MACH_ESPRESSO=y
 CONFIG_MACH_IXDP2351=y
 CONFIG_MACH_ROADRUNNER=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
+CONFIG_WATCHDOG=y
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
+CONFIG_USB=y
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index a907ad5..5c50239 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,155 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Jan 27 07:33:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_LOFT=y
@@ -160,190 +18,43 @@
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
-CONFIG_ARCH_IXDP4XX=y
 CONFIG_MACH_FSG=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
-
-#
-# IXP4xx Options
-#
-CONFIG_DMABOUNCE=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_NPE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -352,102 +63,24 @@
 CONFIG_IP_VS_LBLCR=m
 CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -460,1132 +93,113 @@
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
 CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
 CONFIG_SATA_VIA=y
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
 CONFIG_PATA_ARTOP=y
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_IXP4XX_CF=y
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_IXP4XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=m
 CONFIG_HDLC_RAW=m
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_IXP4XX_HSS is not set
 CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
 CONFIG_WAN_ROUTER_DRIVERS=m
-# CONFIG_CYCLADES_SYNC is not set
-# CONFIG_LAPBETHER is not set
-# CONFIG_X25_ASY is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_IXP4XX=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_FSG=y
-
-#
-# LED Triggers
-#
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index d1f1646e..ea80e7e 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,960 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Fri Aug 21 15:41:39 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-CONFIG_SA1100_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP7XX=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_HP700=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_HP700=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -993,182 +104,9 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index f661e76..896dbe0 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -1,883 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:54:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KAFA=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 668ba59..9f906a8 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,1304 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Wed Jun  3 13:52:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4611d3c..ccc9c99 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,1876 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:08:54 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Marvell Kirkwood Implementations
-#
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_ESATA_SHEEVAPLUG=y
+CONFIG_MACH_GURUPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_OPENRD_ULTIMATE=y
 CONFIG_MACH_NETSPACE_V2=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
+CONFIG_MACH_INETSPACE_V2=y
+CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_NET2BIG_V2=y
+CONFIG_MACH_NET5BIG_V2=y
+CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index e6f2276..47c4883 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -1,1021 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Fri Dec  5 10:30:27 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index af75951..faa2865 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -1,875 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:53:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
 CONFIG_SA1100_LART=y
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_LART=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_LART=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
 CONFIG_CRC32=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 6df7b14..e1eaff7 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -1,1146 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 03:07:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_LOKI=y
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Marvell Loki (88RC8480) Implementations
-#
 CONFIG_MACH_LB88RC8480=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_MV=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index aeb7686..1c8c9ee 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,1031 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:51 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index 6116fee..20caaab 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -1,877 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Nov  3 14:15:32 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
+# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
 CONFIG_MACH_LPD7A400=y
-# CONFIG_MACH_LPD7A404 is not set
-CONFIG_ARCH_LH7A400=y
-CONFIG_LPD7A40X_CPLD_SSP=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADS7843_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 142cccd..1efcce9 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1,1127 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 17:50:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
-# CONFIG_MACH_LPD7A400 is not set
 CONFIG_MACH_LPD7A404=y
-CONFIG_ARCH_LH7A404=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADC_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
-# CONFIG_FB_ARMCLCD_HITACHI is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_LH7=y
-CONFIG_USB_LH7=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 75c6293..c4ba274 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -1,800 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:18:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
 CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LUBBOCK=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_G_SERIAL=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
deleted file mode 100644
index c1a1fb0..0000000
--- a/arch/arm/configs/lusl7200_defconfig
+++ /dev/null
@@ -1,453 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:24:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_FIQ=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-CONFIG_ARCH_L7200=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x00010000
-CONFIG_ZBOOT_ROM_BSS=0xf03e0000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 8e9a723..af805e8 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,432 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Jan 30 12:42:03 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -436,1101 +56,127 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DS2760=y
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
 CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_BQ24022=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_BQ24022=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 1cddb61..04efa1b3e 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -1,794 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 20:00:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index ff44bd1..2472a95 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -1,383 +1,38 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Wed May 20 12:29:51 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_S3C_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -385,82 +40,21 @@
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -470,10 +64,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
@@ -484,298 +74,60 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_INFTL=y
 CONFIG_RFD_FTL=y
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
 CONFIG_MTD_LPDDR=y
-CONFIG_MTD_QINFO_PROBE=y
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_SENSORS_TSL2550=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
 CONFIG_ZD1211RW=m
 CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -784,1065 +136,159 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=128
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_S3C24XX=y
-# CONFIG_SPI_S3C24XX_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IBMAEM is not set
-# CONFIG_SENSORS_IBMPEX is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=m
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
-# CONFIG_USB_STORAGE_FREECOM is not set
 CONFIG_USB_STORAGE_ISD200=m
 CONFIG_USB_STORAGE_USBAT=m
 CONFIG_USB_STORAGE_SDDR09=m
 CONFIG_USB_STORAGE_SDDR55=m
 CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 CONFIG_USB_SERIAL_CP210X=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
 CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1882,165 +328,41 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2048,7 +370,6 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2056,41 +377,8 @@
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 4b55dcb..47ad3b1a 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -1,1223 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Wed Apr 28 11:23:19 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910/MMP2 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
-# CONFIG_MACH_AVENGERS_LITE is not set
-# CONFIG_MACH_TTC_DKB is not set
 CONFIG_MACH_FLINT=y
 CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_CPU_MMP2=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
 CONFIG_MFD_MAX8925=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_MAX8649=y
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_MAX8925=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_MAX8925=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_MAX8925=y
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index fe25e3b..2b8f7af 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -1,894 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Nov  7 01:36:45 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_GPIOS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_GOLDFISH is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_MSM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# MSM7200 Board Type
-#
 CONFIG_MACH_HALIBUT=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_SERIAL_MSM_NOINIT is not set
-CONFIG_MSM_SMD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_MSM_NAND=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_GOLDFISH_NAND is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-CONFIG_MSM_RMNET=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_GPIO=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DCC_TTY=y
-# CONFIG_GOLDFISH_TTY is not set
-CONFIG_BINDER=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MSM=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9633=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_AKM8976=y
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_LOW_MEMORY_KILLER=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_MSM=y
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# USB Function Support
-#
-CONFIG_USB_FUNCTION=y
-CONFIG_USB_FUNCTION_MSM_HSUSB=y
-# CONFIG_USB_FUNCTION_NULL is not set
-# CONFIG_USB_FUNCTION_ZERO is not set
-# CONFIG_USB_FUNCTION_LOOPBACK is not set
-CONFIG_USB_FUNCTION_ADB=y
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Android
-#
-# CONFIG_ANDROID_GADGET is not set
-# CONFIG_ANDROID_RAM_CONSOLE is not set
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_VIBRATOR=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index da4710d..b0d0824 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,1687 +1,140 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:22:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
 CONFIG_ARCH_MV78XX0=y
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Marvell MV78xx0 Implementations
-#
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index f575070..2f38d97 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,1104 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:11:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Freescale MXC Implementations
-#
 CONFIG_ARCH_MX1=y
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX1 platforms:
-#
-CONFIG_MACH_MXLADS=y
+CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_IMX=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 1ecd627..6454e18e 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -1,1169 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Tue Apr 14 16:58:09 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-CONFIG_MACH_MX21=y
-# CONFIG_MACH_MX27 is not set
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX21ADS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b4c1366..b2038b0 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,1273 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Fri Jul 24 16:08:06 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
index d409537..2d29329 100644
--- a/arch/arm/configs/mx31pdk_defconfig
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -1,772 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Sun Oct 26 15:55:29 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
 # CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
 CONFIG_MACH_MX31_3DS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 8a06bc6..161f907 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,203 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 22:56:24 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-CONFIG_ARCH_MX3=y
-# CONFIG_ARCH_MXC91231 is not set
-CONFIG_ARCH_MX31=y
-CONFIG_ARCH_MX35=y
-
-#
-# MX3 platforms:
-#
-CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
@@ -212,1001 +26,98 @@
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-CONFIG_ARCH_HAS_RNGA=y
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-CONFIG_MFD_WM8350=y
-CONFIG_MFD_WM8350_CONFIG_MODE_0=y
-CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
 CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_FB_MX3=y
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a708fd6..a665ecb 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -1,528 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Tue Feb  2 15:20:48 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX5=y
-CONFIG_ARCH_MX51=y
-
-#
-# MX5 platforms:
-#
 CONFIG_MACH_MX51_BABBAGE=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXC_TZIC=y
-# CONFIG_MXC_PWM is not set
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
 CONFIG_PM_TEST_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -541,761 +74,98 @@
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
 CONFIG_MOUSE_PS2_ELANTECH=y
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_IMX is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_MXC=y
-
-
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_MXC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_MXC is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
 CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index de0c28a..993e94d 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -1,1421 +1,138 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8-omap1
-# Fri Jan 18 10:21:06 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_GPIO_SWITCH=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_STI=y
-CONFIG_OMAP_STI_CONSOLE=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
 CONFIG_MACH_NOKIA770=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIBRF6150=y
-# CONFIG_BT_HCIH4P is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP_HW=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-CONFIG_SENSORS_TLV320AIC23=y
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
-# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
 CONFIG_SND_DUMMY=y
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_OMAP_AIC23=y
-# CONFIG_SND_OMAP_TSC2101 is not set
-# CONFIG_SND_SX1 is not set
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-CONFIG_CBUS=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USER=y
-CONFIG_CBUS_TAHVO_USB=y
-# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_USER=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_RTC=y
-CONFIG_CBUS_RETU_WDT=y
-# CONFIG_CBUS_RETU_HEADSET is not set
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 9405e32..56aebb6 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -1,1226 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug  6 22:17:23 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_HAVE_MTD_OTP=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
 CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_MENELAUS=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_TUSB6010=y
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_EEM=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index d165c75..462dd18 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -1,1301 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Jul 29 10:46:54 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
-# CONFIG_MACH_USB_A9263 is not set
 CONFIG_MACH_NEOCORE926=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 # CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_MMC_AT91=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 171265e..d7dc992 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,1141 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 14:28:26 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
 CONFIG_PCMCIA_SA1111=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=m
+CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
-# CONFIG_ULTRA is not set
-CONFIG_SMC91X=y
 CONFIG_SMC9194=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_SA1111=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-CONFIG_USB_MOUSE=m
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 78f58a9..25ed772 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,1043 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:18:42 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
 CONFIG_IP_NF_QUEUE=y
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_21285 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_21285_WATCHDOG is not set
-CONFIG_977_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=y
 CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_MAUI is not set
 CONFIG_SOUND_YM3812=y
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_WAVEARTIST=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 2a97e36..316af54 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -1,923 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Tue Jun  6 15:26:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_NETX=y
-
-#
-# NetX Implementations
-#
 CONFIG_MACH_NXDKN=y
 CONFIG_MACH_NXDB500=y
 CONFIG_MACH_NXEB500HMI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySMX0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_NET_NETX=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_NETX=y
 CONFIG_SERIAL_NETX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_NETX=m
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 92d9086..0e2dc26 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,388 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 23 22:57:16 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_NOMADIK=y
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Nomadik boards
-#
 CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_NOMADIK_8815=y
-CONFIG_I2C_BITBANG_8815NHK=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
 CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -392,924 +46,87 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_TESTS=m
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_NOMADIK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_PL061 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
index 7dc1580..1f528a0 100644
--- a/arch/arm/configs/ns9xxx_defconfig
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -3,26 +3,11 @@
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_A9M9360=y
-CONFIG_MACH_A9M9750=y
-CONFIG_MACH_CC7UCAMRY=y
-CONFIG_MACH_CC9C=y
-CONFIG_MACH_CC9P9210=y
-CONFIG_MACH_CC9P9210JS=y
-CONFIG_MACH_CC9P9215=y
-CONFIG_MACH_CC9P9215JS=y
 CONFIG_MACH_CC9P9360DEV=y
 CONFIG_MACH_CC9P9360JS=y
-CONFIG_MACH_CC9P9360VAL=y
-CONFIG_MACH_CC9P9750DEV=y
-CONFIG_MACH_CC9P9750VAL=y
-CONFIG_MACH_CCW9C=y
-CONFIG_MACH_INC20OTTER=y
-CONFIG_MACH_OTTER=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_FPE_NWFPE=y
@@ -39,24 +24,18 @@
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_NS9XXX_ETH=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_NS921X=y
-CONFIG_SERIAL_NS921X_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_ADC_NS9215=m
 CONFIG_I2C=m
 CONFIG_I2C_GPIO=m
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_DEBUG is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
@@ -65,7 +44,6 @@
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_NS9215=m
 CONFIG_EXT2_FS=m
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
@@ -73,7 +51,6 @@
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig
index f80848a..10180cf 100644
--- a/arch/arm/configs/nuc910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 10 22:09:25 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-CONFIG_CPU_W90P910=y
-
-#
-# W90P910 Machines
-#
-CONFIG_MACH_W90P910EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 51cc2a2..27aa873 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -1,972 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:31:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC950=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
 CONFIG_MACH_W90P950EVB=y
-
-#
-# NUC960 Machines
-#
-# CONFIG_MACH_W90N960EVB is not set
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NUC900=y
 CONFIG_GPM1040A0_320X240=y
 CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
index aa7e128..56fd7ad 100644
--- a/arch/arm/configs/nuc960_defconfig
+++ b/arch/arm/configs/nuc960_defconfig
@@ -1,921 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:20:11 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC960=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
-# CONFIG_MACH_W90P950EVB is not set
-
-#
-# NUC960 Machines
-#
 CONFIG_MACH_W90N960EVB=y
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 5a9e95f..aa24172 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -1,1388 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Wed Oct  1 17:14:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP3_BEAGLE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 94dfcf0a..5db9a6b 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -1,287 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Thu May 13 10:54:43 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-CONFIG_OMAP_DEBUG_LEDS=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
 CONFIG_ARCH_OMAP2430=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PACKAGE_CUS=y
-CONFIG_OMAP_PACKAGE_CBP=y
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
 CONFIG_MACH_OMAP_H4=y
 CONFIG_MACH_OMAP_APOLLON=y
 CONFIG_MACH_OMAP_2430SDP=y
@@ -294,9 +43,6 @@
 CONFIG_MACH_OMAP3_PANDORA=y
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
 CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
 CONFIG_MACH_NOKIA_RX51=y
 CONFIG_MACH_OMAP_ZOOM2=y
@@ -306,264 +52,41 @@
 CONFIG_MACH_SBC3530=y
 CONFIG_MACH_OMAP_3630SDP=y
 CONFIG_MACH_OMAP_4430SDP=y
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -573,1689 +96,197 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
 CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_MESH is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_MENELAUS=y
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_OMAP2_DSS is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_N810 is not set
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
-# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
-# CONFIG_SND_OMAP_SOC_SDP3430 is not set
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
-# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
-# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_TWL4030_USB=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index b02e371..3b072e8 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1,1585 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 18 14:01:52 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_SMARTREFLEX=y
-# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
 CONFIG_MACH_OMAP3EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
 CONFIG_FB_OMAP2=y
 # CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 5d08e0b..d5a62268 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -1,1796 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Sat Feb  6 20:25:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
 CONFIG_MACH_OMAP3_PANDORA=y
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_ALS is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
 CONFIG_PANEL_TPO_TD043MTEA1=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-# CONFIG_SHM_SIGNAL is not set
-# CONFIG_IOQ is not set
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
index 83365f0..1d1ab0b 100644
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ b/arch/arm/configs/omap3_stalker_lks_defconfig
@@ -1,1691 +1,150 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Mon May 17 16:57:28 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CUS=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
 CONFIG_MACH_SBC3530=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_OMAP2_DSS is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 968fbaa..e988ecc 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -1,475 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Fri Dec  4 16:02:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
-# CONFIG_IPV6_PIMSM_V2 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
@@ -481,33 +97,21 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -516,38 +120,24 @@
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_IP_VS=m
 CONFIG_IP_VS_IPV6=y
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -558,18 +148,8 @@
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -581,22 +161,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -605,10 +173,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -626,62 +190,19 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -696,15 +217,9 @@
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_DRR=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
@@ -712,20 +227,7 @@
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -735,10 +237,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTSDIO=y
 CONFIG_BT_HCIUART=y
@@ -748,230 +246,38 @@
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
 CONFIG_BT_HCIBFUSB=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -979,22 +285,15 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1002,44 +301,8 @@
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-# CONFIG_WIMAX_I2400M_USB is not set
-# CONFIG_WIMAX_I2400M_SDIO is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 # CONFIG_ATM_DRIVERS is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -1050,620 +313,81 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
 CONFIG_BATTERY_BQ27x00=y
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_OXU210HP_HCD=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
 CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
 CONFIG_USB_SERIAL_ARK3116=m
@@ -1671,7 +395,6 @@
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1707,14 +430,11 @@
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
 CONFIG_USB_SERIAL_SIEMENS_MPI=m
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1722,441 +442,95 @@
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_SERIAL_OPTICON=m
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ZERO_HNPTEST=y
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 CONFIG_UIO_PDRV=m
 CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_XATTR=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
 CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2195,183 +569,37 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2379,7 +607,6 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2387,44 +614,8 @@
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index 45b4eba..0cf4147 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -1,1303 +1,136 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:47:37 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
 # CONFIG_OMAP_MUX_WARNINGS is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
-# CONFIG_ARCH_OMAP2420 is not set
 CONFIG_ARCH_OMAP2430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
 CONFIG_MACH_OMAP_2430SDP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
 CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_GPIO=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MENELAUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_OMAP24XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index ddde429..5dbe595 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,1727 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc9-omap1
-# Tue Sep 15 16:48:34 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-# CONFIG_LEDS_OMAP_PWM is not set
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index 609f348..8e8f4e9 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -1,1610 +1,154 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 12:21:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
 CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 1fb0456..63e0c2d 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,1279 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Wed May 12 12:26:05 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_4430SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_LOCAL_TIMERS is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 CONFIG_KS8851=y
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_TWL4030 is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index cc86342..0b24858 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -1,961 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:07:29 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OMAP2 is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 61744e5..0e42ba4 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -1,1171 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:20:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index d773857..5e536cf 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -1,1177 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:01:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
index 6ec487e..c0867b1 100644
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -1,1087 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:02:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_ARTHUR=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AN2720 is not set
 # CONFIG_USB_BELKIN is not set
 # CONFIG_USB_ARMLINUX is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
index 7218b96..ac08e51 100644
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -1,654 +1,37 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:48 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_ROMFS_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 91ef2ed0..e2de2aa 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,1339 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2-omap1
-# Wed Feb 20 17:12:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
-CONFIG_OMAP_ARM_60MHZ=y
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 CONFIG_DEBUG_DRIVER=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-CONFIG_SPI_TSC2101=y
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_TEST=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-# CONFIG_OMAP_DSP is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index b12b406..858f93a 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -1,1119 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
 CONFIG_MACH_OMAP_H4=y
-# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
-# CONFIG_MACH_OMAP2_H4_USB1 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=y
 CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_OMAP_IR=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-CONFIG_GPIOEXPANDER_OMAP=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_MENELAUS=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index e9c1408..265af26 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -1,1252 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:02 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-CONFIG_OMAP_PS2=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
index fea9319..cc7fbf8 100644
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -1,838 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:05 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 0efb4b0..c7bb558 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -1,1259 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OMAP_LDP=y
-# CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index 556fcca..9105de7 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,1090 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3-omap1
-# Fri Nov 23 12:24:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
-# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_OMAP_CF=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
index 9a15d5d..aa777e6 100644
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -1,927 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP730=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_PERSEUS2=y
-# CONFIG_MACH_OMAP_FSAMPLE is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_195MHZ is not set
 CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 881faea..0a7ed44 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,663 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Fri Jun 12 17:25:46 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_ZOOM2=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -667,879 +73,71 @@
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL4030_POWEROFF is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ZERO=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index 5e55b55..f8085b0 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -1,682 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 13:04:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_OMAP_ZOOM3=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -686,925 +73,83 @@
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 19b91de..1579857 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,1133 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:18 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_MACH_ONEARM=y
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AT91 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index ee1ebd8..439323b 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,225 +1,16 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:30:00 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Orion Implementations
-#
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
@@ -242,1631 +33,147 @@
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
 CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
 # CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index bf06d36..6fa1b14 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -1,426 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Fri Oct  3 11:50:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OVERO=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -430,209 +61,34 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_93CX6=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -640,64 +96,36 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
 CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
@@ -707,1178 +135,141 @@
 CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
index feffaa2..828d7cb 100644
--- a/arch/arm/configs/palmte_defconfig
+++ b/arch/arm/configs/palmte_defconfig
@@ -1,760 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Sat May 19 11:04:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
 CONFIG_MACH_OMAP_PALMTE=y
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_OMAP_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
index 55d5b7df..31d02c4 100644
--- a/arch/arm/configs/palmtt_defconfig
+++ b/arch/arm/configs/palmtt_defconfig
@@ -1,843 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3-omap1
-# Sun Oct 29 00:36:12 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-CONFIG_OMAP_LL_DEBUG_UART2=y
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
 CONFIG_MACH_OMAP_PALMTT=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_OMAP_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_TSC2102 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OMAP=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_OMAP=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 CONFIG_RTC_DRV_OMAP=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# Synchronous Serial Interfaces (SSI)
-#
-# CONFIG_OMAP_UWIRE is not set
-# CONFIG_OMAP_TSC2101 is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6efc746..c478db6 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -1,890 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:13:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-z71"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
 CONFIG_MACH_OMAP_PALMZ71=y
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_TSC2046 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 6d162b1..4baa83c 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -1,950 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Sun Aug 24 02:29:27 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
-CONFIG_MACH_PALMZ72=y
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index fa153f2..583a061 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -1,1095 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Dec 21 10:52:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 6e7155c..4c9afa4 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -1,355 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 16:19:50 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_PICOTUX2XX=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -359,429 +55,70 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
 CONFIG_SENSORS_ADM1029=m
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
@@ -796,440 +133,49 @@
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_PCF8591=m
 CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VT1211 is not set
 CONFIG_SENSORS_W83781D=m
 CONFIG_SENSORS_W83791D=m
 CONFIG_SENSORS_W83792D=m
 CONFIG_SENSORS_W83793=m
 CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=m
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_AT91=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1269,115 +215,28 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index dbfabb5..d1efbdc 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -1,745 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:03:02 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
 CONFIG_SA1100_PLEB=y
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 2f7b9ce..bd481f0 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1,272 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Mon Sep 11 13:59:24 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PNX4008=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -277,64 +60,10 @@
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
 CONFIG_IP6_NF_QUEUE=m
-
-#
-# DECnet: Netfilter Configuration
-#
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -354,42 +83,17 @@
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
 CONFIG_LLC2=m
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -397,23 +101,11 @@
 CONFIG_IPDDP_DECAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
 CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -426,303 +118,71 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=m
 CONFIG_MTD_DOC2001=m
 CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_NANDSIM=m
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_SCSI_SATA=m
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_WAN=y
 CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
 CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
 CONFIG_LAPBETHER=m
 CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -738,44 +198,15 @@
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_VSXXXAA=m
@@ -799,736 +230,187 @@
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
 CONFIG_JOYSTICK_STINGER=m
-# CONFIG_JOYSTICK_TWIDJOY is not set
 CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_GUNZE=m
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-# CONFIG_DVB_CX24123 is not set
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-# CONFIG_DVB_S5H1420 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-# CONFIG_DVB_ZL10353 is not set
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-
-#
-# Miscellaneous devices
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_USBPCWATCHDOG=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_SL811_HCD=m
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
 CONFIG_USB_SERIAL_IPW=m
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
 CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
 CONFIG_NCPFS_STRONG=y
 CONFIG_NCPFS_NFS_NS=y
 CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
 CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
 CONFIG_ACORN_PARTITION_RISCIX=y
 CONFIG_OSF_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_ATARI_PARTITION=y
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
 CONFIG_SGI_PARTITION=y
 CONFIG_ULTRIX_PARTITION=y
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1567,96 +449,24 @@
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 113511f..74d7e01 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,973 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Tue Jan 12 08:57:10 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910 Implmentations
-#
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
 CONFIG_MACH_AVENGERS_LITE=y
-# CONFIG_MACH_TTC_DKB is not set
-CONFIG_CPU_PXA168=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 3365c5d..917a070b 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -1,796 +1,59 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
 CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 82ca6c8..1677a06 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,1331 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Mon Jul 13 22:48:49 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-CONFIG_CPU_PXA930=y
-CONFIG_CPU_PXA935=y
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-CONFIG_MACH_ZYLONITE=y
 CONFIG_MACH_LITTLETON=y
 CONFIG_MACH_TAVOREVB=y
 CONFIG_MACH_SAAR=y
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_MOUSE_PXA930_TRKBALL=y
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_GPIO_MAX7301=y
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_DA903X=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 94e20fe..1cd381e1 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:45:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_MACH_TAVOREVB=y
-
-#
-# Marvell PXA168/910 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
 CONFIG_MACH_TTC_DKB=y
-CONFIG_CPU_PXA910=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 12d0d64..9160f3b 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 12:28:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
 CONFIG_MACH_QIL_A9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_AT91_EARLY_DBGU is not set
 CONFIG_AT91_EARLY_USART0=y
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_M41T94=y
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
index acb1a8f..f7caa90 100644
--- a/arch/arm/configs/raumfeld_defconfig
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -1,1655 +1,164 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 21:57:32 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-CONFIG_CPU_PXA320=y
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
 CONFIG_MACH_RAUMFELD_RC=y
 CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_PROTO=y
 CONFIG_MACH_RAUMFELD_SPEAKER=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_ISL29003=y
 CONFIG_TI_DAC7512=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
 CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 CONFIG_TOUCHSCREEN_EETI=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-CONFIG_W1=m
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
 CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
 CONFIG_BATTERY_DS2760=m
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
 CONFIG_SENSORS_LIS3_SPI=y
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_MAX8660=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-CONFIG_PXA3XX_GCU=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_RAUMFELD_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=y
-# CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA_SOC_SSP=y
 CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AK4104=y
-CONFIG_SND_SOC_CS4270=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
 CONFIG_LEDS_LT3593=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
 CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
 CONFIG_CACHEFILES=y
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFS_FSCACHE=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1688,211 +197,12 @@
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 1237017..9312ef9 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -1,1095 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:41:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
-# CONFIG_MACH_REALVIEW_PB1176 is not set
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index a509a5e..fb75192 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,1090 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index e9124a0..af278f7a 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -1,910 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Mon Aug  6 16:47:24 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ZONE_DMA=y
-CONFIG_FIQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_RPC=y
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_ARCH_ACORN=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM610=y
 CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
-CONFIG_CPU_32v3=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V3=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V3=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V3=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_TIMER_ACORN=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_ARXESCSI=m
 CONFIG_SCSI_CUMANA_2=m
 CONFIG_SCSI_EESOXSCSI=m
 CONFIG_SCSI_POWERTECSCSI=y
-
-#
-# The following drivers are not fully supported
-#
 CONFIG_SCSI_CUMANA_1=m
 CONFIG_SCSI_OAK1=m
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_ICSIDE=y
-# CONFIG_MD is not set
+CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_RISCPC=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_RPCKBD=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_ACORN=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_ACORN=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ACORN=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_VIDC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=y
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=y
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -920,14 +116,8 @@
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
 CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
@@ -937,79 +127,9 @@
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=m
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 56d4928..ffaef43 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1,462 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 15:28:56 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
 CONFIG_MACH_NOKIA_RX51=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -466,753 +61,80 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-
-# Frame buffer hardware drivers
-#
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
 # CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
 # CONFIG_OMAP2_DSS_VENC is not set
 CONFIG_OMAP2_DSS_SDI=y
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
-# CONFIG_PANEL_TPO_TD043MTEA1 is not set
 CONFIG_PANEL_ACX565AKM=y
-
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -1222,645 +144,79 @@
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_USB_G_NOKIA=m
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=m
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 44cea2d..f9096c1 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,347 +1,31 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Fri May 28 19:15:48 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_PULL_UP=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_ADC=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HWMON=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2443_CLOCK=y
-CONFIG_S3C24XX_DCLK=y
 CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=128
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C24XX_GPIO_EXTRA128=y
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_MACH_SMDK=y
-CONFIG_S3C24XX_SIMTEC_AUDIO=y
-CONFIG_S3C2410_SETUP_TS=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_SIMTEC_NOR=y
-CONFIG_MACH_BAST_IDE=y
-
-#
-# S3C2410 Machines
-#
 CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
-# CONFIG_H1940BT is not set
-CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_N35=y
 CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
-CONFIG_BAST_PC104_IRQ=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
-CONFIG_CPU_S3C2412=y
-CONFIG_S3C2412_DMA=y
-CONFIG_S3C2412_PM=y
-
-#
-# S3C2412 Machines
-#
 CONFIG_MACH_JIVE=y
-# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
-CONFIG_CPU_S3C2416=y
-CONFIG_S3C2416_DMA=y
-
-#
-# S3C2416 Machines
-#
 CONFIG_MACH_SMDK2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C2440_XTAL_12000000=y
-CONFIG_S3C2440_XTAL_16934400=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 and S3C2442 Machines
-#
 CONFIG_MACH_ANUBIS=y
 CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
@@ -349,236 +33,57 @@
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2440=y
 CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_MACH_MINI2440=y
 CONFIG_MACH_RX1950=y
-CONFIG_CPU_S3C2443=y
-CONFIG_S3C2443_DMA=y
-
-#
-# S3C2443 Machines
-#
 CONFIG_MACH_SMDK2443=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_HYBLA is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_VENO is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -591,37 +96,13 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=m
-CONFIG_NETFILTER_XT_CONNMARK=m
-
-#
-# Xtables targets
-#
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -633,14 +114,12 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -656,43 +135,7 @@
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-# CONFIG_IP_VS_RR is not set
-# CONFIG_IP_VS_WRR is not set
-# CONFIG_IP_VS_LC is not set
-# CONFIG_IP_VS_WLC is not set
-# CONFIG_IP_VS_LBLC is not set
-# CONFIG_IP_VS_LBLCR is not set
-# CONFIG_IP_VS_DH is not set
-# CONFIG_IP_VS_SH is not set
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -704,22 +147,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -728,10 +159,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -749,39 +176,8 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_L2TP is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_L2CAP_EXT_FEATURES is not set
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -789,12 +185,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -803,428 +193,58 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=m
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
 CONFIG_BLK_DEV_PLATFORM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_HAVE_PATA_PLATFORM=y
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
 CONFIG_JOYSTICK_A3D=m
@@ -1238,9 +258,6 @@
 CONFIG_JOYSTICK_SIDEWINDER=m
 CONFIG_JOYSTICK_TMDC=m
 CONFIG_JOYSTICK_IFORCE=m
-# CONFIG_JOYSTICK_IFORCE_USB is not set
-# CONFIG_JOYSTICK_IFORCE_232 is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
 CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
@@ -1254,52 +271,9 @@
 CONFIG_JOYSTICK_XPAD=m
 CONFIG_JOYSTICK_XPAD_FF=y
 CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-CONFIG_TOUCHSCREEN_USB_JASTEC=y
-CONFIG_TOUCHSCREEN_USB_E2I=y
-CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
-CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
-CONFIG_TOUCHSCREEN_USB_NEXIO=y
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
 CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -1307,537 +281,68 @@
 CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_PCF50633_PMU is not set
-# CONFIG_INPUT_PCF8574 is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_N_GSM is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2412=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
 CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
-# CONFIG_SPI_S3C24XX_FIQ is not set
 CONFIG_SPI_S3C24XX_GPIO=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_TLE62X0=m
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_CHARGER_PCF50633 is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_S3C is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-# CONFIG_MAX63XX_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_TPS65010=m
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-CONFIG_MFD_PCF50633=y
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_PCF50633_ADC is not set
-CONFIG_PCF50633_GPIO=y
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
 CONFIG_SND_USB_CAIAQ=m
-# CONFIG_SND_USB_CAIAQ_INPUT is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-CONFIG_SND_S3C_I2SV2_SOC=m
-CONFIG_SND_S3C2412_SOC_I2S=m
-CONFIG_SND_S3C_SOC_AC97=m
-# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-CONFIG_SND_SOC_WM8750=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_U132_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
 CONFIG_USB_STORAGE_FREECOM=m
 CONFIG_USB_STORAGE_ISD200=m
@@ -1850,73 +355,15 @@
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_WWAN=m
 CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
@@ -1934,315 +381,64 @@
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_SDHCI_S3C is not set
 CONFIG_MMC_SPI=m
 CONFIG_MMC_S3C=y
-# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-CONFIG_MMC_S3C_PIO=y
-# CONFIG_MMC_S3C_DMA is not set
-# CONFIG_MMC_S3C_PIODMA is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_DAC124S085=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2802=m
-# CONFIG_LEDS_LT3593 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_PCF50633 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2281,227 +477,13 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2b64238..ba6a515 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,1538 +1,93 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Fri May 28 19:05:39 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HSMMC2=y
-CONFIG_S3C_DEV_HWMON=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_USB_HSOTG=y
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_S3C_DEV_RTC=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_DMA=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_S3C_PM_DEBUG_LED_SMDK is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_SAMSUNG_WAKEMASK=y
-CONFIG_PLAT_S3C64XX=y
-CONFIG_CPU_S3C6400=y
-CONFIG_CPU_S3C6410=y
-CONFIG_S3C64XX_DMA=y
-CONFIG_S3C64XX_SETUP_SDHCI=y
-CONFIG_S3C64XX_SETUP_I2C0=y
-CONFIG_S3C64XX_SETUP_I2C1=y
-CONFIG_S3C64XX_SETUP_FB_24BPP=y
-CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
 CONFIG_MACH_SMDK6400=y
 CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
-CONFIG_SMDK6410_SD_CH0=y
-# CONFIG_SMDK6410_SD_CH1 is not set
-# CONFIG_SMDK6410_WM1190_EV1 is not set
-# CONFIG_SMDK6410_WM1192_EV1 is not set
 CONFIG_MACH_NCP=y
 CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ=y
 CONFIG_MACH_SMARTQ5=y
 CONFIG_MACH_SMARTQ7=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C64XX=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C=y
-# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_S3C_SOC_AC97=m
-# CONFIG_SND_S3C64XX_SOC_WM8580 is not set
 CONFIG_SND_SOC_SMDK_WM9713=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9713=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-# CONFIG_HID_CANDO is not set
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-# CONFIG_HID_PRODIKEYS is not set
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EGALAX is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
-# CONFIG_MMC_SDHCI_S3C_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
index 532e987..0b0266c 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -1,1012 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:32 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_S5P6440=y
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6440=y
 CONFIG_MACH_SMDK6440=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
index 068219b..0e92a78 100644
--- a/arch/arm/configs/s5p6442_defconfig
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -1,907 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:34 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
 CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6442=y
 CONFIG_MACH_SMDK6442=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index ebc6245..41bafc9 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,1026 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
 CONFIG_ARCH_S5PC100=y
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_HSMMC2=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PC100=y
-CONFIG_S5PC100_SETUP_FB_24BPP=y
-CONFIG_S5PC100_SETUP_I2C1=y
-CONFIG_S5PC100_SETUP_SDHCI=y
-CONFIG_S5PC100_SETUP_SDHCI_GPIO=y
 CONFIG_MACH_SMDKC100=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
index c4de360..22c2d14 100644
--- a/arch/arm/configs/s5pc110_defconfig
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -1,924 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:37 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_AQUILA is not set
-# CONFIG_MACH_GONI is not set
-# CONFIG_MACH_SMDKV210 is not set
 CONFIG_MACH_SMDKC110=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index e2f5bce..1753836 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,927 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 19:04:39 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC100 is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S5P_GPIO_DRVSTR=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_WDT=y
-CONFIG_SAMSUNG_DEV_ADC=y
-CONFIG_SAMSUNG_DEV_TS=y
-CONFIG_S3C_PL330_DMA=y
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_S5P_EXT_INT=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_AQUILA is not set
-# CONFIG_MACH_GONI is not set
 CONFIG_MACH_SMDKV210=y
-# CONFIG_MACH_SMDKC110 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_PL330=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HAVE_S3C2410_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 81b290a..ecf2531 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -1,987 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 14 02:01:07 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
 CONFIG_MACH_SAM9_L9260=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=3
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-# CONFIG_MISC_DEVICES is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RTC_DRV_DS1553=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1020,77 +141,8 @@
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index 7c49bc3..b0b9694 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -1,869 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:26:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
 CONFIG_SA1100_SHANNON=y
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=y
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 46de124..caa07db 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,1248 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git6
-# Thu Jan  8 17:14:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_VIA82C505=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-CONFIG_CS89x0_NOEEPROM=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_KAHLUA is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index ee25e63..af3b12e 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -1,451 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:10:36 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="oe1"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
 CONFIG_SA1100_SIMPAD=y
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
@@ -455,110 +40,33 @@
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -567,395 +75,37 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=800
-CONFIG_INPUT_TSDEV_SCREEN_Y=600
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig
index 35e64d1..cf29f3e 100644
--- a/arch/arm/configs/spear300_defconfig
+++ b/arch/arm/configs/spear300_defconfig
@@ -1,773 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:36:23 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-CONFIG_MACH_SPEAR300=y
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-CONFIG_BOARD_SPEAR300_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig
index cbbfd29..824e444 100644
--- a/arch/arm/configs/spear310_defconfig
+++ b/arch/arm/configs/spear310_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
 CONFIG_MACH_SPEAR310=y
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR310_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig
index 2ae3c11..842f7f3 100644
--- a/arch/arm/configs/spear320_defconfig
+++ b/arch/arm/configs/spear320_defconfig
@@ -1,775 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:12 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR3XX=y
-# CONFIG_ARCH_SPEAR6XX is not set
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
 CONFIG_MACH_SPEAR320=y
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_BOARD_SPEAR320_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig
index c85a029..6777c11 100644
--- a/arch/arm/configs/spear600_defconfig
+++ b/arch/arm/configs/spear600_defconfig
@@ -1,760 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Mar 23 14:37:26 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_PLAT_SPEAR=y
-# CONFIG_ARCH_SPEAR3XX is not set
 CONFIG_ARCH_SPEAR6XX=y
-# CONFIG_MACH_SPEAR300 is not set
-# CONFIG_MACH_SPEAR310 is not set
-# CONFIG_MACH_SPEAR320 is not set
-# CONFIG_BOARD_SPEAR300_EVB is not set
-CONFIG_MACH_SPEAR600=y
-CONFIG_BOARD_SPEAR600_EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_PL061=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d89489..aebd4bb 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,539 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:25:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -543,18 +74,9 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -563,774 +85,105 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1338,483 +191,85 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index 06a8293..d5e260b 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -1,1456 +1,129 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 17 16:38:03 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
 CONFIG_TREE_PREEMPT_RCU=y
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_HAVE_AT91_USART3=y
-CONFIG_HAVE_AT91_USART4=y
-CONFIG_HAVE_AT91_USART5=y
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9G10 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91SAM9G45 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT572D940HF is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
-# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
-# CONFIG_MACH_CPU9G20 is not set
 CONFIG_MACH_PORTUXG20=y
 CONFIG_MACH_STAMP9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
 CONFIG_W1_MASTER_GPIO=y
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
 CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
index b1a3a97..94a2d90 100644
--- a/arch/arm/configs/stmp378x_defconfig
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -1,1140 +1,128 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 02:44:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-# CONFIG_ARCH_STMP37XX is not set
 CONFIG_ARCH_STMP378X=y
-# CONFIG_MACH_STMP37XX is not set
-CONFIG_MACH_STMP378X=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# RDS decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_EVENT_TRACER is not set
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
index a3751c9..d8ee58c 100644
--- a/arch/arm/configs/stmp37xx_defconfig
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -1,1001 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.1
-# Mon Apr 20 04:41:26 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-CONFIG_ARCH_STMP37XX=y
-# CONFIG_ARCH_STMP378X is not set
-CONFIG_MACH_STMP37XX=y
-# CONFIG_MACH_STMP378X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_STMP_DBG is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 8a9e7e6..20a8618 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -1,1117 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:16:10 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
 CONFIG_MACH_SX1=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_OMAP_AIC23 is not set
-# CONFIG_SND_OMAP_TSC2101 is not set
-CONFIG_SND_SX1=y
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
 CONFIG_NLS_ISO8859_5=y
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index dccf14b..e89ca19 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -1,883 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7-hammer
-# Thu Mar 27 16:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_PLAT_S3C24XX=y
-# CONFIG_S3C2410_DMA is not set
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_TCT_HAMMER=y
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_ETH=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 # CONFIG_PROC_SYSCTL is not set
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 1e8f5a2..37f4834 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,409 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon Apr 30 21:23:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
-CONFIG_MACH_TRIZEPS4_CONXS=y
-# CONFIG_MACH_TRIZEPS4_ANY is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -413,370 +57,63 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=y
 CONFIG_MTD_DOC2001=y
 CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE=y
-CONFIG_MTD_DOCECC=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
-# CONFIG_MTD_DOCPROBE_55AA is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_PATA_PLATFORM=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_HERMES=y
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=y
-# CONFIG_ZD1211RW is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_HERMES=y
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -785,920 +122,105 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_PXA=y
 CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 9155196..46e5e07 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,1225 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan  6 00:01:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_TCM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# ST-Ericsson AB U300/U330/U335/U365 Platform
-#
-
-#
-# ST-Ericsson Mobile Platform Products
-#
 CONFIG_MACH_U300=y
-
-#
-# ST-Ericsson U300/U330/U335/U365 Feature Selections
-#
-# CONFIG_MACH_U300_BS2X is not set
-# CONFIG_MACH_U300_BS330 is not set
 CONFIG_MACH_U300_BS335=y
-# CONFIG_MACH_U300_BS365 is not set
-# CONFIG_MACH_U300_SINGLE_RAM is not set
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
-# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
 CONFIG_MACH_U300_SPIDUMMY=y
-
-#
-# All the settings below must match the bootloader's settings
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_STU300=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_PL022=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_COH901327_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-CONFIG_AB3100_CORE=y
-CONFIG_AB3100_OTP=y
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-CONFIG_REGULATOR_AB3100=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_AB3100=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
 CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_COH901318=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 727aff9..be80f03 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,679 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Mon Nov 30 11:11:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_ARCH_U8500=y
-CONFIG_PLAT_NOMADIK=y
-CONFIG_HAS_MTU=y
-
-#
-# ST-Ericsson platform type
-#
-
-#
-# ST-Ericsson Multicore Mobile Platforms
-#
-CONFIG_MACH_U8500_MOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PL022=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 87b700e..2e39f38 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -1,1141 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:39:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_USB_A9260=y
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 7f018ed..ee82d09 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -1,1133 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:15:19 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
 CONFIG_MACH_USB_A9263=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index a1af0b97..0ce710f 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,1000 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Mon May  8 20:15:57 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
 CONFIG_MACH_VERSATILE_AB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
 CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_ARMMMCI=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y
 CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 909887a..9d7bf5e 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -1,1676 +1,174 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 17:12:07 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_ARCH_VIPER=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_PWM=m
-CONFIG_PXA_HAVE_ISA_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_SPARSE_RAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
 CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=m
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 84a72ac..70d47db 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -1,1128 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 09:02:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=".xcep-itech"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLOCK is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
 CONFIG_MACH_XCEP=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
 CONFIG_SENSORS_MAX6650=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 3b627aa..30c537f 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -1,1215 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 09:53:59 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
 CONFIG_MACH_YL9200=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=3
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S1D135XX=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
 CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=y
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_FILE_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index fca5ff6..960f655 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -1,2031 +1,189 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Dec  8 20:27:05 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_MACH_ARCOM_ZEUS=y
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_ARCOM_PCMCIA=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PXA_HAVE_ISA_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SOC_COMMON=m
 CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
 CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_P54_COMMON is not set
 CONFIG_RT2X00=m
-# CONFIG_RT2500USB is not set
 CONFIG_RT73USB=m
-# CONFIG_RT2800USB is not set
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=7
 CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_PXA is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=m
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index a0162fa..7e79503 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -40,12 +40,12 @@
 	int result;
 
 	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -58,12 +58,12 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -78,12 +78,12 @@
 	int result;
 
 	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -96,12 +96,12 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -118,11 +118,11 @@
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
+		"ldrex	%1, [%3]\n"
 		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
+		"teq	%1, %4\n"
+		"strexeq %0, %5, [%3]\n"
+		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
 		    : "cc");
 	} while (res);
@@ -137,12 +137,12 @@
 	unsigned long tmp, tmp2;
 
 	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
+	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
 	: "r" (addr), "Ir" (mask)
 	: "cc");
 }
@@ -249,7 +249,7 @@
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
 	: "=&r" (result)
-	: "r" (&v->counter)
+	: "r" (&v->counter), "Qo" (v->counter)
 	);
 
 	return result;
@@ -260,11 +260,11 @@
 	u64 tmp;
 
 	__asm__ __volatile__("@ atomic64_set\n"
-"1:	ldrexd	%0, %H0, [%1]\n"
-"	strexd	%0, %2, %H2, [%1]\n"
+"1:	ldrexd	%0, %H0, [%2]\n"
+"	strexd	%0, %3, %H3, [%2]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
-	: "=&r" (tmp)
+	: "=&r" (tmp), "=Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -275,13 +275,13 @@
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_add\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -294,13 +294,13 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -315,13 +315,13 @@
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_sub\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -334,13 +334,13 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -358,12 +358,12 @@
 
 	do {
 		__asm__ __volatile__("@ atomic64_cmpxchg\n"
-		"ldrexd		%1, %H1, [%2]\n"
+		"ldrexd		%1, %H1, [%3]\n"
 		"mov		%0, #0\n"
-		"teq		%1, %3\n"
-		"teqeq		%H1, %H3\n"
-		"strexdeq	%0, %4, %H4, [%2]"
-		: "=&r" (res), "=&r" (oldval)
+		"teq		%1, %4\n"
+		"teqeq		%H1, %H4\n"
+		"strexdeq	%0, %5, %H5, [%3]"
+		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		: "r" (&ptr->counter), "r" (old), "r" (new)
 		: "cc");
 	} while (res);
@@ -381,11 +381,11 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	strexd	%1, %3, %H3, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	strexd	%1, %4, %H4, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
 	: "r" (&ptr->counter), "r" (new)
 	: "cc");
 
@@ -402,16 +402,16 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
 "	subs	%0, %0, #1\n"
 "	sbc	%H0, %H0, #0\n"
 "	teq	%H0, #0\n"
 "	bmi	2f\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter)
 	: "cc");
 
@@ -429,18 +429,18 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_unless\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	teq	%0, %4\n"
-"	teqeq	%H0, %H4\n"
+"1:	ldrexd	%0, %H0, [%4]\n"
+"	teq	%0, %5\n"
+"	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %5\n"
-"	adc	%H0, %H0, %H5\n"
-"	strexd	%2, %0, %H0, [%3]\n"
+"	adds	%0, %0, %6\n"
+"	adc	%H0, %H0, %H6\n"
+"	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (val), "=&r" (ret), "=&r" (tmp)
+	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (u), "r" (a)
 	: "cc");
 
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 51662fe..6750b8e 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -121,4 +121,8 @@
 extern void elf_set_personality(const struct elf32_hdr *);
 #define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
 
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
 #endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index f7bd52b..c1062c3 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -19,6 +19,7 @@
 #define HWCAP_NEON	4096
 #define HWCAP_VFPv3	8192
 #define HWCAP_VFPv3D16	16384
+#define HWCAP_TLS	32768
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index c980156..1261b1f9 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
+#include <asm/system.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -179,25 +180,38 @@
  * IO port primitives for more information.
  */
 #ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+#define readb_relaxed(c) ({ u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
 					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
 					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,__mem_pci(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),__mem_pci(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),__mem_pci(c)))
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 #define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
 #define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
 #define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
 #define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
 #define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
 #define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
@@ -244,13 +258,13 @@
  * io{read,write}{8,16,32} macros
  */
 #ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 237282f..2721a58 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -7,6 +7,8 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
+#define NR_IRQS_LEGACY	16
+
 /*
  * Use this value to indicate lack of interrupt
  * capability
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index df15a0d..8ec9ef5 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -19,10 +19,26 @@
 
 #ifndef __ASSEMBLY__
 
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ *
+ * Function copies machine registers from @oldregs to @newregs. If @oldregs is
+ * %NULL then current registers are stored there.
+ */
 static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		__asm__ __volatile__ ("stmia %0, {r0 - r15}"
+				      : : "r" (&newregs->ARM_r0));
+		__asm__ __volatile__ ("mrs %0, cpsr"
+				      : "=r" (newregs->ARM_cpsr));
+	}
+}
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index c59842d..8a0dd18 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -20,6 +20,7 @@
 	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
+	unsigned int		nr_irqs;	/* number of IRQs */
 	unsigned int		phys_io;	/* start of physical io	*/
 	unsigned int		io_pg_offst;	/* byte offset for io 
 						 * page tabe entry	*/
@@ -37,6 +38,7 @@
 	void			(*fixup)(struct machine_desc *,
 					 struct tag *, char **,
 					 struct meminfo *);
+	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 8920b2d6..ce3eee9f 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,6 +17,7 @@
 /*
  * This is internal.  Do not use it.
  */
+extern unsigned int arch_nr_irqs;
 extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, void *);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 742c2aaeb..d2fedb5 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,8 @@
 #define MT_MEMORY		9
 #define MT_ROM			10
 #define MT_MEMORY_NONCACHED	11
+#define MT_MEMORY_DTCM		12
+#define MT_MEMORY_ITCM		13
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 52f0da1..16330bd 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -46,6 +46,7 @@
 					/* IRQ mapping				*/
 	int		(*map_irq)(struct pci_dev *, u8, u8);
 	struct hw_pci	*hw;
+	void		*private_data;	/* platform controller private data	*/
 };
 
 /*
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index f3eabf1..833306e 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -21,8 +21,8 @@
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
+	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
-	u16	gpio_pullup;			/* high == pullup activated */
+	int	gpio_pullup;			/* high == pullup activated */
 };
 
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
new file mode 100644
index 0000000..fdbc43b
--- /dev/null
+++ b/arch/arm/include/asm/memblock.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_ARM_MEMBLOCK_H
+#define _ASM_ARM_MEMBLOCK_H
+
+#ifdef CONFIG_MMU
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+struct meminfo;
+struct machine_desc;
+
+extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
+
+#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 4312ee5..23c2e8e 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -124,6 +124,15 @@
 #endif /* !CONFIG_MMU */
 
 /*
+ * We fix the TCM memories max 32 KiB ITCM resp DTCM at these
+ * locations
+ */
+#ifdef CONFIG_HAVE_TCM
+#define ITCM_OFFSET	UL(0xfffe0000)
+#define DTCM_OFFSET	UL(0xfffe8000)
+#endif
+
+/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
@@ -158,7 +167,7 @@
 #endif
 
 #ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
+#define arch_adjust_zones(size,holes) do { } while (0)
 #elif !defined(CONFIG_ZONE_DMA)
 #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
 #endif
@@ -234,76 +243,11 @@
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#ifndef CONFIG_DISCONTIGMEM
-
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
 /*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
deleted file mode 100644
index ae63a4f..0000000
--- a/arch/arm/include/asm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <mach/memory.h>
-
-#endif
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 6a89567..7bed3da 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -91,7 +91,11 @@
 
 unsigned long get_wchan(struct task_struct *p);
 
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax()			smp_mb()
+#else
 #define cpu_relax()			barrier()
+#endif
 
 /*
  * Create a new kernel thread
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 9dcb11e..c974be8 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -184,6 +184,42 @@
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
 
+/*
+ * kprobe-based event tracer support
+ */
+#include <linux/stddef.h>
+#include <linux/types.h>
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f392fb4..f1e5a9b 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,8 +201,7 @@
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	unsigned short node;
-	unsigned short highmem;
+	unsigned int highmem;
 };
 
 struct meminfo {
@@ -212,9 +211,8 @@
 
 extern struct meminfo meminfo;
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)	\
-		if ((mi)->bank[iter].node == no)
+#define for_each_bank(iter,mi)				\
+	for (iter = 0; iter < (mi)->nr_banks; iter++)
 
 #define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
 #define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h
new file mode 100644
index 0000000..de00332
--- /dev/null
+++ b/arch/arm/include/asm/stackprotector.h
@@ -0,0 +1,38 @@
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and gcc expects it to be defined by a global variable called
+ * "__stack_chk_guard" on ARM.  This unfortunately means that on SMP
+ * we cannot have a different canary value per task.
+ */
+
+#ifndef _ASM_STACKPROTECTOR_H
+#define _ASM_STACKPROTECTOR_H 1
+
+#include <linux/random.h>
+#include <linux/version.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+	unsigned long canary;
+
+	/* Try to get a semi random initial value. */
+	get_random_bytes(&canary, sizeof(canary));
+	canary ^= LINUX_VERSION_CODE;
+
+	current->stack_canary = canary;
+	__stack_chk_guard = current->stack_canary;
+}
+
+#endif	/* _ASM_STACKPROTECTOR_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 5f4f480..8ba1ccf 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -83,7 +83,7 @@
 
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
-		     int sig, const char *name);
+		     int sig, int code, const char *name);
 
 #define xchg(ptr,x) \
 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
new file mode 100644
index 0000000..e71d6ff
--- /dev/null
+++ b/arch/arm/include/asm/tls.h
@@ -0,0 +1,46 @@
+#ifndef __ASMARM_TLS_H
+#define __ASMARM_TLS_H
+
+#ifdef __ASSEMBLY__
+	.macro set_tls_none, tp, tmp1, tmp2
+	.endm
+
+	.macro set_tls_v6k, tp, tmp1, tmp2
+	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	.endm
+
+	.macro set_tls_v6, tp, tmp1, tmp2
+	ldr	\tmp1, =elf_hwcap
+	ldr	\tmp1, [\tmp1, #0]
+	mov	\tmp2, #0xffff0fff
+	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
+	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+
+	.macro set_tls_software, tp, tmp1, tmp2
+	mov	\tmp1, #0xffff0fff
+	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+#endif
+
+#ifdef CONFIG_TLS_REG_EMUL
+#define tls_emu		1
+#define has_tls_reg		1
+#define set_tls		set_tls_none
+#elif __LINUX_ARM_ARCH__ >= 7 ||					\
+	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
+#define tls_emu		0
+#define has_tls_reg		1
+#define set_tls		set_tls_v6k
+#elif __LINUX_ARM_ARCH__ == 6
+#define tls_emu		0
+#define has_tls_reg		(elf_hwcap & HWCAP_TLS)
+#define set_tls		set_tls_v6
+#else
+#define tls_emu		0
+#define has_tls_reg		0
+#define set_tls		set_tls_software
+#endif
+
+#endif	/* __ASMARM_TLS_H */
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 422f3cc..3d5fc41 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -3,6 +3,8 @@
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
+#include <asm/hwcap.h>
+
 #include "vfp.h"
 
 @ Macros to allow building with old toolkits (with no VFP support)
@@ -22,12 +24,20 @@
 	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
 
 	@ write all the working registers out of the VFP
@@ -38,10 +48,18 @@
 	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 26d302c..980b78e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,10 +13,12 @@
 
 # Object file lists.
 
-obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
+obj-y		:= elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
+
 obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
@@ -39,6 +41,7 @@
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 8835115..85f2a01 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -40,6 +40,9 @@
 int main(void)
 {
   DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_CC_STACKPROTECTOR
+  DEFINE(TSK_STACK_CANARY,	offsetof(struct task_struct, stack_canary));
+#endif
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c
index 0a13854..9256523 100644
--- a/arch/arm/kernel/compat.c
+++ b/arch/arm/kernel/compat.c
@@ -217,10 +217,3 @@
 	struct param_struct *params = (struct param_struct *)tags;
 	build_tag_list(params, &params->u2);
 }
-
-void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h
index 27e61a6..39264ab 100644
--- a/arch/arm/kernel/compat.h
+++ b/arch/arm/kernel/compat.h
@@ -9,5 +9,3 @@
 */
 
 extern void convert_to_tag_list(struct tag *tags);
-
-extern void squash_mem_tags(struct tag *tag);
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
new file mode 100644
index 0000000..cd3b853
--- /dev/null
+++ b/arch/arm/kernel/crash_dump.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/kernel/crash_dump.c
+ *
+ * Copyright (C) 2010 Nokia Corporation.
+ * Author: Mika Westerberg
+ *
+ * This code is taken from arch/x86/kernel/crash_dump_64.c
+ *   Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *   Copyright (C) IBM Corporation, 2004. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* stores the physical address of elf header of crash image */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is int he user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user(buf, vaddr + offset, csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	iounmap(vaddr);
+	return csize;
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7ee48e7..bb8e93a7 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -22,6 +22,7 @@
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
+#include <asm/tls.h>
 
 #include "entry-header.S"
 
@@ -162,8 +163,6 @@
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -204,7 +203,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -218,6 +217,9 @@
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -291,7 +293,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq
+1:	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -327,7 +329,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -393,8 +395,6 @@
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -465,9 +465,6 @@
  THUMB(	movne	r0, #0		)
  THUMB(	strne	r0, [r0]	)
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_on
-#endif
 
 	mov	why, #0
 	b	ret_to_user
@@ -739,11 +736,11 @@
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if defined(CONFIG_HAS_TLS_REG)
-	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
-#elif !defined(CONFIG_TLS_REG_EMUL)
-	mov	r4, #0xffff0fff
-	str	r3, [r4, #-15]			@ TLS val at 0xffff0ff0
+	set_tls	r3, r4, r5
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	ldr	r7, [r2, #TI_TASK]
+	ldr	r8, =__stack_chk_guard
+	ldr	r7, [r7, #TSK_STACK_CANARY]
 #endif
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
@@ -753,6 +750,9 @@
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	str	r7, [r8]
+#endif
  THUMB(	mov	ip, r4			   )
 	mov	r0, r5
  ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
@@ -1009,17 +1009,12 @@
  */
 
 __kuser_get_tls:				@ 0xffff0fe0
-
-#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
-	ldr	r0, [pc, #(16 - 8)]		@ TLS stored at 0xffff0ff0
-#else
-	mrc	p15, 0, r0, c13, c0, 3		@ read TLS register
-#endif
+	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
-
-	.rep	5
-	.word	0			@ pad up to __kuser_helper_version
-	.endr
+	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
+	.rep	4
+	.word	0			@ 0xffff0ff0 software TLS value, then
+	.endr				@ pad up to __kuser_helper_version
 
 /*
  * Reference declaration:
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 3b3d2c8..c0d5c3b 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -47,12 +47,14 @@
 #define irq_finish(irq) do { } while (0)
 #endif
 
+unsigned int arch_nr_irqs;
 void (*init_arch_irq)(void) __initdata = NULL;
 unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, cpu;
+	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
 
@@ -67,24 +69,25 @@
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
-		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
+	if (i < nr_irqs) {
+		desc = irq_to_desc(i);
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		action = desc->action;
 		if (!action)
 			goto unlock;
 
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
-		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, " %10s", desc->chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 
 		seq_putc(p, '\n');
 unlock:
-		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
@@ -112,7 +115,7 @@
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (unlikely(irq >= NR_IRQS)) {
+	if (unlikely(irq >= nr_irqs)) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Bad IRQ%u\n", irq);
 		ack_bad_irq(irq);
@@ -132,12 +135,12 @@
 	struct irq_desc *desc;
 	unsigned long flags;
 
-	if (irq >= NR_IRQS) {
+	if (irq >= nr_irqs) {
 		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
 		return;
 	}
 
-	desc = irq_desc + irq;
+	desc = irq_to_desc(irq);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
 	if (iflags & IRQF_VALID)
@@ -151,14 +154,25 @@
 
 void __init init_IRQ(void)
 {
+	struct irq_desc *desc;
 	int irq;
 
-	for (irq = 0; irq < NR_IRQS; irq++)
-		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	for (irq = 0; irq < nr_irqs; irq++) {
+		desc = irq_to_desc_alloc_node(irq, 0);
+		desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	}
 
 	init_arch_irq();
 }
 
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
@@ -178,10 +192,9 @@
 void migrate_irqs(void)
 {
 	unsigned int i, cpu = smp_processor_id();
+	struct irq_desc *desc;
 
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_desc *desc = irq_desc + i;
-
+	for_each_irq_desc(i, desc) {
 		if (desc->node == cpu) {
 			unsigned int newcpu = cpumask_any_and(desc->affinity,
 							      cpu_online_mask);
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index da1f949..8bccbfa 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -583,13 +583,14 @@
 {
 	insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	union reg_pair fnr;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 	long rdv;
-	long rnv  = regs->uregs[rn];
-	long rmv  = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 598ca61..1fc74cb 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -37,12 +37,12 @@
 {
 }
 
-void machine_shutdown(void)
-{
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+	crash_save_cpu(regs, smp_processor_id());
+
+	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
 
 void machine_kexec(struct kimage *image)
@@ -74,7 +74,11 @@
 			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
-	cpu_proc_fin();
+	local_irq_disable();
+	local_fiq_disable();
 	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+	flush_cache_all();
+	cpu_proc_fin();
+	flush_cache_all();
 	cpu_reset(reboot_code_buffer_phys);
 }
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index c457686..de12536 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -201,7 +201,7 @@
 {
 	int shift = 64 - 32;
 	s64 prev_raw_count, new_raw_count;
-	s64 delta;
+	u64 delta;
 
 again:
 	prev_raw_count = atomic64_read(&hwc->prev_count);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index acf5e6f..401e38b 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,7 +28,9 @@
 #include <linux/tick.h>
 #include <linux/utsname.h>
 #include <linux/uaccess.h>
+#include <linux/random.h>
 
+#include <asm/cacheflush.h>
 #include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -36,6 +38,12 @@
 #include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
 static const char *processor_modes[] = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
@@ -84,10 +92,9 @@
 
 void arm_machine_restart(char mode, const char *cmd)
 {
-	/*
-	 * Clean and disable cache, and turn off interrupts
-	 */
-	cpu_proc_fin();
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
 
 	/*
 	 * Tell the mm system that we are going to reboot -
@@ -96,6 +103,15 @@
 	 */
 	setup_mm_for_reboot(mode);
 
+	/* Clean and invalidate caches */
+	flush_cache_all();
+
+	/* Turn off caching */
+	cpu_proc_fin();
+
+	/* Push out any further dirty data, and ensure cache is empty */
+	flush_cache_all();
+
 	/*
 	 * Now call the architecture specific reboot code.
 	 */
@@ -189,19 +205,29 @@
 
 __setup("reboot=", reboot_setup);
 
-void machine_halt(void)
+void machine_shutdown(void)
 {
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
 }
 
+void machine_halt(void)
+{
+	machine_shutdown();
+	while (1);
+}
 
 void machine_power_off(void)
 {
+	machine_shutdown();
 	if (pm_power_off)
 		pm_power_off();
 }
 
 void machine_restart(char *cmd)
 {
+	machine_shutdown();
 	arm_pm_restart(reboot_mode, cmd);
 }
 
@@ -351,17 +377,21 @@
 
 /*
  * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function.  r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
  */
 extern void kernel_thread_helper(void);
 asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
-"	mov	r0, r1\n"
-"	mov	lr, r3\n"
-"	mov	pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+"	bl	trace_hardirqs_on\n"
+#endif
+"	msr	cpsr_c, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
 "	.popsection");
 
@@ -391,11 +421,12 @@
 
 	memset(&regs, 0, sizeof(regs));
 
-	regs.ARM_r1 = (unsigned long)arg;
-	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r4 = (unsigned long)arg;
+	regs.ARM_r5 = (unsigned long)fn;
+	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
@@ -421,3 +452,9 @@
 	} while (count ++ < 16);
 	return 0;
 }
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3f562a7..f99d489 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -52,6 +52,102 @@
 #define BREAKINST_THUMB	0xde01
 #endif
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) \
+	{.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(lr),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(cpsr),
+	REG_OFFSET_NAME(ORIG_r0),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 /*
  * this routine will get a word off of the processes privileged stack.
  * the offset is how far from the base addr as stored in the THREAD.
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 61930eb0..fd26f8d 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -10,6 +10,12 @@
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
 
+	/*
+	 * If there is no indirection page (we are doing crashdumps)
+	 * skip any relocation.
+	 */
+	cmp	r0, #0
+	beq	2f
 
 0:	/* top, read another word for the indirection page */
 	ldr	r3, [r0],#4
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 122d999..d5231ae 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -19,12 +19,15 @@
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
 #include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
+#include <linux/memblock.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -44,7 +47,9 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 #include "compat.h"
+#endif
 #include "atags.h"
 #include "tcm.h"
 
@@ -269,6 +274,21 @@
 extern struct proc_info_list *lookup_processor_type(unsigned int);
 extern struct machine_desc *lookup_machine_type(unsigned int);
 
+static void __init feat_v6_fixup(void)
+{
+	int id = read_cpuid_id();
+
+	if ((id & 0xff0f0000) != 0x41070000)
+		return;
+
+	/*
+	 * HWCAP_TLS is available only on 1136 r1p0 and later,
+	 * see also kuser_get_tls_init.
+	 */
+	if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
+		elf_hwcap &= ~HWCAP_TLS;
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
@@ -311,6 +331,8 @@
 	elf_hwcap &= ~HWCAP_THUMB;
 #endif
 
+	feat_v6_fixup();
+
 	cacheid_init();
 	cpu_proc_init();
 }
@@ -402,13 +424,12 @@
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 	bank->size  = size & PAGE_MASK;
-	bank->node  = PHYS_TO_NID(start);
 
 	/*
 	 * Check whether this memory region has non-zero size or
 	 * invalid node number.
 	 */
-	if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+	if (bank->size == 0)
 		return -EINVAL;
 
 	meminfo.nr_banks++;
@@ -663,6 +684,86 @@
 }
 arch_initcall(customize_machine);
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long total;
+
+	total = max_low_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+/**
+ * reserve_crashkernel() - reserves memory are for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by a dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	unsigned long long total_mem;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret)
+		return;
+
+	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+	if (ret < 0) {
+		printk(KERN_WARNING "crashkernel reservation failed - "
+		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+		return;
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+	       "for crashkernel (System RAM: %ldMB)\n",
+	       (unsigned long)(crash_size >> 20),
+	       (unsigned long)(crash_base >> 20),
+	       (unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
+}
+#else
+static inline void reserve_crashkernel(void) {}
+#endif /* CONFIG_KEXEC */
+
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif /* CONFIG_CRASH_DUMP */
+
+static void __init squash_mem_tags(struct tag *tag)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM)
+			tag->hdr.tag = ATAG_NONE;
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct tag *tags = (struct tag *)&init_tags;
@@ -683,12 +784,14 @@
 	else if (mdesc->boot_params)
 		tags = phys_to_virt(mdesc->boot_params);
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*
 	 * If we have the old style parameters, convert them to
 	 * a tag list.
 	 */
 	if (tags->hdr.tag != ATAG_CORE)
 		convert_to_tag_list(tags);
+#endif
 	if (tags->hdr.tag != ATAG_CORE)
 		tags = (struct tag *)&init_tags;
 
@@ -716,12 +819,15 @@
 
 	parse_early_param();
 
+	arm_memblock_init(&meminfo, mdesc);
+
 	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
 	smp_init_cpus();
 #endif
+	reserve_crashkernel();
 
 	cpu_init();
 	tcm_init();
@@ -729,6 +835,7 @@
 	/*
 	 * Set up various architecture-specific pointers
 	 */
+	arch_nr_irqs = mdesc->nr_irqs;
 	init_arch_irq = mdesc->init_irq;
 	system_timer = mdesc->timer;
 	init_machine = mdesc->init_machine;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b8c3d0f..40dc74f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -429,7 +429,11 @@
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
+#else
+#define smp_timer_broadcast	NULL
+#endif
 
+#ifndef CONFIG_LOCAL_TIMERS
 static void broadcast_timer_set_mode(enum clock_event_mode mode,
 	struct clock_event_device *evt)
 {
@@ -444,7 +448,6 @@
 	evt->rating	= 400;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
-	evt->broadcast	= smp_timer_broadcast;
 
 	clockevents_register_device(evt);
 }
@@ -456,6 +459,7 @@
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
 	evt->cpumask = cpumask_of(cpu);
+	evt->broadcast = smp_timer_broadcast;
 
 	local_timer_setup(evt);
 }
@@ -467,10 +471,13 @@
  */
 static void ipi_cpu_stop(unsigned int cpu)
 {
-	spin_lock(&stop_lock);
-	printk(KERN_CRIT "CPU%u: stopping\n", cpu);
-	dump_stack();
-	spin_unlock(&stop_lock);
+	if (system_state == SYSTEM_BOOTING ||
+	    system_state == SYSTEM_RUNNING) {
+		spin_lock(&stop_lock);
+		printk(KERN_CRIT "CPU%u: stopping\n", cpu);
+		dump_stack();
+		spin_unlock(&stop_lock);
+	}
 
 	set_cpu_online(cpu, false);
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 7c5f0c0..35882fb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -132,7 +132,8 @@
 	twd_calibrate_rate();
 
 	clk->name = "local_timer";
-	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+			CLOCK_EVT_FEAT_C3STOP;
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index e503038..26685c2 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -13,38 +13,35 @@
 #include <linux/ioport.h>
 #include <linux/genalloc.h>
 #include <linux/string.h> /* memcpy */
-#include <asm/page.h> /* PAGE_SHIFT */
 #include <asm/cputype.h>
 #include <asm/mach/map.h>
 #include <mach/memory.h>
 #include "tcm.h"
 
-/* Scream and warn about misuse */
-#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
-    !defined(DTCM_OFFSET) || !defined(DTCM_END)
-#error "TCM support selected but offsets not defined!"
-#endif
-
 static struct gen_pool *tcm_pool;
 
 /* TCM section definitions from the linker */
 extern char __itcm_start, __sitcm_text, __eitcm_text;
 extern char __dtcm_start, __sdtcm_data, __edtcm_data;
 
+/* These will be increased as we run */
+u32 dtcm_end = DTCM_OFFSET;
+u32 itcm_end = ITCM_OFFSET;
+
 /*
  * TCM memory resources
  */
 static struct resource dtcm_res = {
 	.name = "DTCM RAM",
 	.start = DTCM_OFFSET,
-	.end = DTCM_END,
+	.end = DTCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
 static struct resource itcm_res = {
 	.name = "ITCM RAM",
 	.start = ITCM_OFFSET,
-	.end = ITCM_END,
+	.end = ITCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
@@ -52,8 +49,8 @@
 	{
 		.virtual	= DTCM_OFFSET,
 		.pfn		= __phys_to_pfn(DTCM_OFFSET),
-		.length		= (DTCM_END - DTCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_DTCM
 	}
 };
 
@@ -61,8 +58,8 @@
 	{
 		.virtual	= ITCM_OFFSET,
 		.pfn		= __phys_to_pfn(ITCM_OFFSET),
-		.length		= (ITCM_END - ITCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_ITCM
 	}
 };
 
@@ -93,14 +90,24 @@
 }
 EXPORT_SYMBOL(tcm_free);
 
-
-static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
+				  u32 *offset)
 {
 	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
 				    256, 512, 1024, -1, -1, -1, -1 };
 	u32 tcm_region;
 	int tcm_size;
 
+	/*
+	 * If there are more than one TCM bank of this type,
+	 * select the TCM bank to operate on in the TCM selection
+	 * register.
+	 */
+	if (banks > 1)
+		asm("mcr	p15, 0, %0, c9, c2, 0"
+		    : /* No output operands */
+		    : "r" (bank));
+
 	/* Read the special TCM region register c9, 0 */
 	if (!type)
 		asm("mrc	p15, 0, %0, c9, c1, 0"
@@ -111,26 +118,24 @@
 
 	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
 	if (tcm_size < 0) {
-		pr_err("CPU: %sTCM of unknown size!\n",
-			type ? "I" : "D");
+		pr_err("CPU: %sTCM%d of unknown size\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
+	} else if (tcm_size > 32) {
+		pr_err("CPU: %sTCM%d larger than 32k found\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
 	} else {
-		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+		pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n",
 			type ? "I" : "D",
+			bank,
 			tcm_size,
 			(tcm_region & 0xfffff000U),
 			(tcm_region & 1) ? "" : "not ");
 	}
 
-	if (tcm_size != expected_size) {
-		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
-		       type ? "I" : "D",
-		       tcm_size,
-		       expected_size);
-		/* Adjust to the expected size? what can we do... */
-	}
-
 	/* Force move the TCM bank to where we want it, enable */
-	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+	tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
 
 	if (!type)
 		asm("mcr	p15, 0, %0, c9, c1, 0"
@@ -141,10 +146,15 @@
 		    : /* No output operands */
 		    : "r" (tcm_region));
 
-	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
-		 type ? "I" : "D",
-		 tcm_size,
-		 (tcm_region & 0xfffff000U));
+	/* Increase offset */
+	*offset += (tcm_size << 10);
+
+	pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n",
+		type ? "I" : "D",
+		bank,
+		tcm_size,
+		(tcm_region & 0xfffff000U));
+	return 0;
 }
 
 /*
@@ -153,34 +163,52 @@
 void __init tcm_init(void)
 {
 	u32 tcm_status = read_cpuid_tcmstatus();
+	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
+	u8 itcm_banks = (tcm_status & 0x03);
 	char *start;
 	char *end;
 	char *ram;
+	int ret;
+	int i;
 
 	/* Setup DTCM if present */
-	if (tcm_status & (1 << 16)) {
-		setup_tcm_bank(0, DTCM_OFFSET,
-			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+	if (dtcm_banks > 0) {
+		for (i = 0; i < dtcm_banks; i++) {
+			ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
+			if (ret)
+				return;
+		}
+		dtcm_res.end = dtcm_end - 1;
 		request_resource(&iomem_resource, &dtcm_res);
+		dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
 		iotable_init(dtcm_iomap, 1);
 		/* Copy data from RAM to DTCM */
 		start = &__sdtcm_data;
 		end   = &__edtcm_data;
 		ram   = &__dtcm_start;
+		/* This means you compiled more code than fits into DTCM */
+		BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
 	}
 
 	/* Setup ITCM if present */
-	if (tcm_status & 1) {
-		setup_tcm_bank(1, ITCM_OFFSET,
-			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+	if (itcm_banks > 0) {
+		for (i = 0; i < itcm_banks; i++) {
+			ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
+			if (ret)
+				return;
+		}
+		itcm_res.end = itcm_end - 1;
 		request_resource(&iomem_resource, &itcm_res);
+		itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
 		iotable_init(itcm_iomap, 1);
 		/* Copy code from RAM to ITCM */
 		start = &__sitcm_text;
 		end   = &__eitcm_text;
 		ram   = &__itcm_start;
+		/* This means you compiled more code than fits into ITCM */
+		BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
 	}
@@ -208,10 +236,10 @@
 	pr_debug("Setting up TCM memory pool\n");
 
 	/* Add the rest of DTCM to the TCM pool */
-	if (tcm_status & (1 << 16)) {
-		if (dtcm_pool_start < DTCM_END) {
+	if (tcm_status & (0x03 << 16)) {
+		if (dtcm_pool_start < dtcm_end) {
 			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
-					   DTCM_END - dtcm_pool_start + 1, -1);
+					   dtcm_end - dtcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU DTCM: could not add DTCM " \
 				       "remainder to pool!\n");
@@ -219,16 +247,16 @@
 			}
 			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_end - dtcm_pool_start,
 				 dtcm_pool_start);
 		}
 	}
 
 	/* Add the rest of ITCM to the TCM pool */
-	if (tcm_status & 1) {
-		if (itcm_pool_start < ITCM_END) {
+	if (tcm_status & 0x03) {
+		if (itcm_pool_start < itcm_end) {
 			ret = gen_pool_add(tcm_pool, itcm_pool_start,
-					   ITCM_END - itcm_pool_start + 1, -1);
+					   itcm_end - itcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU ITCM: could not add ITCM " \
 				       "remainder to pool!\n");
@@ -236,7 +264,7 @@
 			}
 			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 ITCM_END - itcm_pool_start + 1,
+				 itcm_end - itcm_pool_start,
 				 itcm_pool_start);
 		}
 	}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 1621e53..cda78d5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
+#include <asm/tls.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -518,17 +519,20 @@
 
 	case NR(set_tls):
 		thread->tp_value = regs->ARM_r0;
-#if defined(CONFIG_HAS_TLS_REG)
-		asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) );
-#elif !defined(CONFIG_TLS_REG_EMUL)
-		/*
-		 * User space must never try to access this directly.
-		 * Expect your app to break eventually if you do so.
-		 * The user helper at 0xffff0fe0 must be used instead.
-		 * (see entry-armv.S for details)
-		 */
-		*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-#endif
+		if (tls_emu)
+			return 0;
+		if (has_tls_reg) {
+			asm ("mcr p15, 0, %0, c13, c0, 3"
+				: : "r" (regs->ARM_r0));
+		} else {
+			/*
+			 * User space must never try to access this directly.
+			 * Expect your app to break eventually if you do so.
+			 * The user helper at 0xffff0fe0 must be used instead.
+			 * (see entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
+		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
@@ -743,6 +747,16 @@
 	return;
 }
 
+static void __init kuser_get_tls_init(unsigned long vectors)
+{
+	/*
+	 * vectors + 0xfe0 = __kuser_get_tls
+	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
+	 */
+	if (tls_emu || has_tls_reg)
+		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+}
+
 void __init early_trap_init(void)
 {
 	unsigned long vectors = CONFIG_VECTORS_BASE;
@@ -761,6 +775,11 @@
 	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
 	/*
+	 * Do processor specific fixups for the kuser helpers
+	 */
+	kuser_get_tls_init(vectors);
+
+	/*
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.
 	 */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 030ba72..59ff42d 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_L7200)	+= io-acorn.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 59ff6fd..7d08b43 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -71,7 +71,7 @@
 		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
-		ldr	r5, [fp, #4]		@ *err_ptr
+		ldr	r5, [sp, #8*4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index c008225..4f93c56 100644
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -14,14 +14,4 @@
 
 #define PHYS_OFFSET	UL(0xf0000000)
 
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841eaf8..939bccd 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -366,6 +366,17 @@
 
 endif
 
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
 # ----------------------------------------------------------
 
 if ARCH_AT91SAM9G45
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c1f821e..ca2ac00 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,6 +66,9 @@
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
+
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 85166b7..753c0d3 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -176,6 +177,13 @@
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+	.name		= "vdec_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
 /* One additional fake clock for ohci */
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
@@ -239,6 +247,9 @@
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+		clk_register(&vdec_clk);
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a4102d7..c49f5c0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -26,6 +26,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -235,6 +238,46 @@
 	}
 };
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -256,6 +299,8 @@
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c11fd47..6ea9808 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -27,6 +27,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -269,6 +272,46 @@
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
         {
@@ -294,6 +337,8 @@
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
new file mode 100644
index 0000000..2c08ae4
--- /dev/null
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ *  Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon  <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+	at91sam9260_initialize(18432000);
+
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+	at91_set_serial_console(0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+	.vbus_pin		= SNAPPER9260_IO_EXP_GPIO(5),
+	.vbus_active_low	= 1,
+	.vbus_polled		= 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+	.is_rmii	= 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+	{
+		.name	= "Preboot",
+		.offset	= 0,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Bootloader",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	},
+	{
+		.name	= "Environment",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4M,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+	return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.partition_info	= snapper9260_nand_partition_info,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 5,
+	.nrd_pulse		= 2,
+	.ncs_write_pulse	= 5,
+	.nwe_pulse		= 2,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+				   AT91_SMC_EXNWMODE_DISABLE),
+	.tdf_cycles		= 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+	.gpio_base		= SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+	{
+		/* IO expander */
+		I2C_BOARD_INFO("max7312", 0x28),
+		.platform_data = &snapper9260_io_expander_data,
+	},
+	{
+		/* Audio codec */
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+	{
+		/* RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+	at91_set_A_periph(AT91_PIN_PC14, 0);
+	sam9_smc_configure(3, &snapper9260_nand_smc_config);
+	at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+	at91_add_device_i2c(snapper9260_i2c_devices,
+			    ARRAY_SIZE(snapper9260_i2c_devices));
+	at91_add_device_serial();
+	at91_add_device_usbh(&snapper9260_usbh_data);
+	at91_add_device_udc(&snapper9260_udc_data);
+	at91_add_device_eth(&snapper9260_macb_data);
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+						 ATMEL_SSC_TD | ATMEL_SSC_RD));
+	snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= snapper9260_map_io,
+	.init_irq	= snapper9260_init_irq,
+	.init_machine	= snapper9260_board_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index d8c1ede..9c6af97 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -84,7 +84,7 @@
  */
 #define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index 1499b1c..976f4a6 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -15,7 +15,7 @@
 #ifndef AT91CAP9_DDRSDR_H
 #define AT91CAP9_DDRSDR_H
 
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
 #define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_DDRSDRC_MODE_NORMAL		0
 #define			AT91_DDRSDRC_MODE_NOP		1
@@ -25,10 +25,10 @@
 #define			AT91_DDRSDRC_MODE_EXT_LMR	5
 #define			AT91_DDRSDRC_MODE_DEEP		6
 
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
 #define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
 #define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
 #define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
@@ -49,7 +49,7 @@
 #define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
 
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
 #define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
 #define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
@@ -59,13 +59,13 @@
 #define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
 #define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
 #define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -80,14 +80,14 @@
 #define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
@@ -98,5 +98,11 @@
 #define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
 #define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 43c396b..4e79036 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -84,7 +84,7 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 87de8be..2b56185 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,7 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
new file mode 100644
index 0000000..d27b15b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *	Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0x7 << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL	0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define			AT91_DDRSDRC_NR_14	(3 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
+#define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
+#define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
+#define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT	(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+#define		AT91_DDRSDRC_APDE	(1 << 16)	 /* Active power down exit time */
+#define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+#define			AT91_DDRSDRC_MD_DDR2		6
+#define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
+#define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
+#define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
+
+#define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
+#define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
+#define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
+#define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index b726038..100f5a5 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -17,7 +17,7 @@
 #define AT91SAM9_SDRAMC_H
 
 /* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR		0x00	/* SDRAM Controller Mode Register */
 #define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_SDRAMC_MODE_NORMAL		0
 #define			AT91_SDRAMC_MODE_NOP		1
@@ -27,10 +27,10 @@
 #define			AT91_SDRAMC_MODE_EXT_LMR	5
 #define			AT91_SDRAMC_MODE_DEEP		6
 
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR		0x04	/* SDRAM Controller Refresh Timer Register */
 #define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR		0x08	/* SDRAM Controller Configuration Register */
 #define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_SDRAMC_NC_8	(0 << 0)
 #define			AT91_SDRAMC_NC_9	(1 << 0)
@@ -57,7 +57,7 @@
 #define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
 #define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
 
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR		0x10	/* SDRAM Controller Low Power Register */
 #define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_SDRAMC_LPCB_DISABLE		0
 #define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
@@ -71,16 +71,21 @@
 #define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER		0x14	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		0x18	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		0x1C	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		0x20	/* SDRAM Controller Interrupt Status Register */
 #define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
 
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR		0x24	/* SDRAM Memory Device Register */
 #define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_SDRAMC##num + reg, value)
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index fc2de6c..87ba851 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -74,7 +74,7 @@
  */
 #define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index df2ed84..58528aa 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,6 +44,8 @@
  /* USB Device */
 struct at91_udc_data {
 	u8	vbus_pin;		/* high == host powering us */
+	u8	vbus_active_low;	/* vbus polarity */
+	u8	vbus_polled;		/* Use polling, not interrupt */
 	u8	pullup_pin;		/* active == D+ pulled up */
 	u8	pullup_active_low;	/* true == pullup_pin is active low */
 };
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 833659d..3bef931 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -52,6 +52,7 @@
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
 static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
 #else
 #define cpu_is_at91sam9g45()	(0)
 #define cpu_is_at91sam9g45es()	(0)
+#define cpu_is_at91sam9m10()	(0)
+#define cpu_is_at91sam9g46()	(0)
+#define cpu_is_at91sam9m11()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 04c91e3..bfdd8ab 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -19,6 +19,7 @@
 #define PIN_BASE		NR_AIC_IRQS
 
 #define MAX_GPIO_BANKS		5
+#define NR_BUILTIN_GPIO		(PIN_BASE + (MAX_GPIO_BANKS * 32))
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 08322c4..8c87d0c 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -30,14 +30,50 @@
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	/* Those tow values allow us to delay self-refresh activation
+	 * to the maximum. */
+	u32 lpr0, lpr1;
+	u32 saved_lpr0;
+
+	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+	return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0)	\
+	do { \
+		at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+	} while (0)
 
 #else
 #include <mach/at91sam9_sdramc.h>
@@ -47,7 +83,6 @@
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define	AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -55,13 +90,13 @@
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
 
 	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
 
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 9c5b48e..b6b00a1 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,10 +16,12 @@
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
 #endif
@@ -30,7 +32,6 @@
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -113,12 +114,14 @@
 	/*
 	 * Register usage:
 	 *  R1 = Base address of AT91_PMC
-	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
 	 *  R3 = temporary register
 	 *  R4 = temporary register
+	 *  R5 = Base address of second RAM Controller or 0 if not present
 	 */
 	ldr	r1, .at91_va_base_pmc
 	ldr	r2, .at91_va_base_sdramc
+	ldr	r5, .at91_va_base_ramc1
 
 	/* Drain write buffer */
 	mcr	p15, 0, r0, c7, c10, 4
@@ -127,20 +130,33 @@
 	/* Put SDRAM in self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-	str	r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 
-	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	/* prepare for DDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, #AT91_DDRSDRC_LPCB
+	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
+	strne	r4, .saved_sam9_lpr1
+	bicne	r4, #AT91_DDRSDRC_LPCB
+	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
 #else
 	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
 	str	r3, .saved_sam9_lpr
 
-	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	bic	r3, #AT91_SDRAMC_LPCB
+	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Save Master clock setting */
@@ -247,14 +263,21 @@
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, .saved_sam9_lpr1
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
+
 #else
-	/* Restore LPR on AT91SAM9 */
+	/* Restore LPR on AT91 with SDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Restore registers, and return */
@@ -273,18 +296,29 @@
 .saved_sam9_lpr:
 	.word 0
 
+.saved_sam9_lpr1:
+	.word 0
+
 .at91_va_base_pmc:
 	.word AT91_VA_BASE_SYS + AT91_PMC
 
 #ifdef CONFIG_ARCH_AT91RM9200
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
 #else
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+	.word 0
 #endif
 
 ENTRY(at91_slow_clock_sz)
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 72e405d..d3f959e 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -91,14 +91,23 @@
 	.parent = &pll1_clk,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name = "BUSCLK",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+};
+
 static struct clk_lookup lookups[] = {
-	{			/* UART0 */
-	 .dev_id = "uarta",
-	 .clk = &uart_clk,
-	 }, {			/* UART1 */
-	     .dev_id = "uartb",
-	     .clk = &uart_clk,
-	     }
+	{			/* Bus clock */
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	}, {			/* UART0 */
+		.dev_id = "uarta",
+		.clk = &uart_clk,
+	}, {			/* UART1 */
+		.dev_id = "uartb",
+		.clk = &uart_clk,
+	}
 };
 
 static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index dbaae5f..eb34bd12 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -30,7 +30,6 @@
 config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
 	help
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 09fb57e..3c3bf45 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -32,7 +32,6 @@
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 0x01000000;
-	mi->bank[0].node = 0;
 }
 
 
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index dc81cc6..4a7a232 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
+#include <linux/memblock.h>
 #include <linux/types.h>
 #include <linux/string.h>
 
@@ -29,6 +30,12 @@
 
 extern void edb7211_map_io(void);
 
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
 static void __init
 fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	      char **cmdline, struct meminfo *mi)
@@ -43,10 +50,8 @@
 	 */
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 8*1024*1024;
-	mi->bank[0].node = 0;
 	mi->bank[1].start = 0xc1000000;
 	mi->bank[1].size = 8*1024*1024;
-	mi->bank[1].node = 1;
 	mi->nr_banks = 2;
 }
 
@@ -57,6 +62,7 @@
 	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
+	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 7430e40..a696099 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -39,7 +39,6 @@
 		{
 			.start	= 0xC0000000,
 			.size	= 0x01000000,
-			.node	= 0
 		},
 	},
 };
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index fedd807..072cc6b 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,6 +11,7 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rx, tmp
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index f70d52b..f45c8e8 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -20,7 +20,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
 /*
  * Physical DRAM offset.
  */
@@ -72,7 +71,6 @@
  * 	node 2:  0xd0000000 - 0xd7ffffff
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
-#define NODE_MEM_SIZE_BITS	24
 #define SECTION_SIZE_BITS	24
 #define MAX_PHYSMEM_BITS	32
 
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
index 427507a..11033f1 100644
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -1,2 +1,3 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
+obj-$(CONFIG_PCI)			+= pcie.o
 obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 2e30c82..9df8391 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -32,6 +32,7 @@
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
 #include "core.h"
+#include "devices.h"
 
 /*
  * NOR Flash
@@ -117,6 +118,9 @@
 {
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
+	cns3xxx_ahci_init();
+	cns3xxx_sdhci_init();
+
 	pm_power_off = cns3xxx_power_off;
 }
 
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
new file mode 100644
index 0000000..50b4d31
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -0,0 +1,111 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+#include "devices.h"
+
+/*
+ * AHCI
+ */
+static struct resource cns3xxx_ahci_resource[] = {
+	[0] = {
+		.start	= CNS3XXX_SATA2_BASE,
+		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CNS3XXX_SATA,
+		.end	= IRQ_CNS3XXX_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_ahci_pdev = {
+	.name		= "ahci",
+	.id		= 0,
+	.resource	= cns3xxx_ahci_resource,
+	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
+	.dev		= {
+		.dma_mask		= &cns3xxx_ahci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init cns3xxx_ahci_init(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(MISC_SATA_POWER_MODE);
+	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+	__raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+	/* Enable SATA PHY */
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+	/* Enable SATA Clock */
+	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+	/* De-Asscer SATA Reset */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+
+	platform_device_register(&cns3xxx_ahci_pdev);
+}
+
+/*
+ * SDHCI
+ */
+static struct resource cns3xxx_sdhci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_SDIO_BASE,
+		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_SDIO,
+		.end   = IRQ_CNS3XXX_SDIO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cns3xxx_sdhci_pdev = {
+	.name		= "sdhci-cns3xxx",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
+	.resource	= cns3xxx_sdhci_resources,
+};
+
+void __init cns3xxx_sdhci_init(void)
+{
+	u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014);
+	u32 gpioa_pins = __raw_readl(gpioa);
+
+	/* MMC/SD pins share with GPIOA */
+	gpioa_pins |= 0x1fff0004;
+	__raw_writel(gpioa_pins, gpioa);
+
+	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+
+	platform_device_register(&cns3xxx_sdhci_pdev);
+}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
new file mode 100644
index 0000000..27e15a1
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.h
@@ -0,0 +1,20 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_DEVICES_H_
+#define __CNS3XXX_DEVICES_H_
+
+void __init cns3xxx_ahci_init(void);
+void __init cns3xxx_sdhci_init(void);
+
+#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 8a2f5a2..6dbce13 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -247,37 +247,36 @@
  * Misc block
  */
 #define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
 
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP_VALUE(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP_VALUE(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP_VALUE(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP_VALUE(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP_VALUE(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP_VALUE(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP_VALUE(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP_VALUE(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP_VALUE(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP_VALUE(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP_VALUE(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP_VALUE(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP_VALUE(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP_VALUE(0x54)
+#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
+#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
+#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
+#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
+#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
+#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
+#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
+#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
 
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP_VALUE(0x310)
+#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
 
-#define MISC_USB_CFG_REG			MISC_MEM_MAP_VALUE(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP_VALUE(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP_VALUE(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP_VALUE(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP_VALUE(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP_VALUE(0x814)
+#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
+#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
+#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
+#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
+#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
+#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
 
 #define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
 #define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
@@ -300,21 +299,21 @@
 /*
  * Power management and clock control
  */
-#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
+#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
 
-#define PM_CLK_GATE_REG					PMU_REG_VALUE(0x000)
-#define PM_SOFT_RST_REG					PMU_REG_VALUE(0x004)
-#define PM_HS_CFG_REG					PMU_REG_VALUE(0x008)
-#define PM_CACTIVE_STA_REG				PMU_REG_VALUE(0x00C)
-#define PM_PWR_STA_REG					PMU_REG_VALUE(0x010)
-#define PM_CLK_CTRL_REG					PMU_REG_VALUE(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_REG_VALUE(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_REG_VALUE(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_REG_VALUE(0x020)
-#define PM_WDT_CTRL_REG					PMU_REG_VALUE(0x024)
-#define PM_WU_CTRL0_REG					PMU_REG_VALUE(0x028)
-#define PM_WU_CTRL1_REG					PMU_REG_VALUE(0x02C)
-#define PM_CSR_REG					PMU_REG_VALUE(0x030)
+#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
+#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
+#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
+#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
+#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
+#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
+#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
+#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
+#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
+#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
+#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
+#define PM_CSR_REG					PMU_MEM_MAP(0x030)
 
 /* PM_CLK_GATE_REG */
 #define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
new file mode 100644
index 0000000..38088c3
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -0,0 +1,389 @@
+/*
+ * PCI-E support for CNS3xxx
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Richard Liu <richard.liu@caviumnetworks.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <asm/mach/map.h>
+#include <mach/cns3xxx.h>
+#include "core.h"
+
+enum cns3xxx_access_type {
+	CNS3XXX_HOST_TYPE = 0,
+	CNS3XXX_CFG0_TYPE,
+	CNS3XXX_CFG1_TYPE,
+	CNS3XXX_NUM_ACCESS_TYPES,
+};
+
+struct cns3xxx_pcie {
+	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
+	unsigned int irqs[2];
+	struct resource res_io;
+	struct resource res_mem;
+	struct hw_pci hw_pci;
+
+	bool linked;
+};
+
+static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */
+
+static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
+{
+	struct pci_sys_data *root = sysdata;
+
+	return &cns3xxx_pcie[root->domain];
+}
+
+static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+{
+	return sysdata_to_cnspci(dev->sysdata);
+}
+
+static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
+{
+	return sysdata_to_cnspci(bus->sysdata);
+}
+
+static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
+				  unsigned int devfn, int where)
+{
+	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
+	int busno = bus->number;
+	int slot = PCI_SLOT(devfn);
+	int offset;
+	enum cns3xxx_access_type type;
+	void __iomem *base;
+
+	/* If there is no link, just show the CNS PCI bridge. */
+	if (!cnspci->linked && (busno > 0 || slot > 0))
+		return NULL;
+
+	/*
+	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
+	 * we still want to access it. For this to work, we must place
+	 * the first device on the same bus as the CNS PCI bridge.
+	 */
+	if (busno == 0) {
+		if (slot > 1)
+			return NULL;
+		type = slot;
+	} else {
+		type = CNS3XXX_CFG1_TYPE;
+	}
+
+	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
+	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
+
+	return base + offset;
+}
+
+static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base) {
+		*val = 0xffffffff;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	v = __raw_readl(base);
+
+	if (bus->number == 0 && devfn == 0 &&
+			(where & 0xffc) == PCI_CLASS_REVISION) {
+		/*
+		 * RC's class is 0xb, but Linux PCI driver needs 0x604
+		 * for a PCIe bridge. So we must fixup the class code
+		 * to 0x604 here.
+		 */
+		v &= 0xff;
+		v |= 0x604 << 16;
+	}
+
+	*val = (v >> shift) & mask;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base)
+		return PCIBIOS_SUCCESSFUL;
+
+	v = __raw_readl(base);
+
+	v &= ~(mask << shift);
+	v |= (val & mask) << shift;
+
+	__raw_writel(v, base);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
+	struct resource *res_io = &cnspci->res_io;
+	struct resource *res_mem = &cnspci->res_mem;
+	struct resource **sysres = sys->resource;
+
+	BUG_ON(request_resource(&iomem_resource, res_io) ||
+	       request_resource(&iomem_resource, res_mem));
+
+	sysres[0] = res_io;
+	sysres[1] = res_mem;
+
+	return 1;
+}
+
+static struct pci_ops cns3xxx_pcie_ops = {
+	.read = cns3xxx_pci_read_config,
+	.write = cns3xxx_pci_write_config,
+};
+
+static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
+}
+
+static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
+	int irq = cnspci->irqs[slot];
+
+	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
+		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
+		PCI_FUNC(dev->devfn), slot, pin, irq);
+
+	return irq;
+}
+
+static struct cns3xxx_pcie cns3xxx_pcie[] = {
+	[0] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe0 I/O space",
+			.start = CNS3XXX_PCIE0_IO_BASE,
+			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe0 non-prefetchable",
+			.start = CNS3XXX_PCIE0_MEM_BASE,
+			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
+		.hw_pci = {
+			.domain = 0,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+	[1] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe1 I/O space",
+			.start = CNS3XXX_PCIE1_IO_BASE,
+			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe1 non-prefetchable",
+			.start = CNS3XXX_PCIE1_MEM_BASE,
+			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
+		.hw_pci = {
+			.domain = 1,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+};
+
+static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	u32 reg;
+	unsigned long time;
+
+	reg = __raw_readl(MISC_PCIE_CTRL(port));
+	/*
+	 * Enable Application Request to 1, it will exit L1 automatically,
+	 * but when chip back, it will use another clock, still can use 0x1.
+	 */
+	reg |= 0x3;
+	__raw_writel(reg, MISC_PCIE_CTRL(port));
+
+	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
+	pr_info("PCIe: Port[%d] Check data link layer...", port);
+
+	time = jiffies;
+	while (1) {
+		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
+		if (reg & 0x1) {
+			pr_info("Link up.\n");
+			cnspci->linked = 1;
+			break;
+		} else if (time_after(jiffies, time + 50)) {
+			pr_info("Device not found.\n");
+			break;
+		}
+	}
+}
+
+static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	struct pci_sys_data sd = {
+		.domain = port,
+	};
+	struct pci_bus bus = {
+		.number = 0,
+		.ops = &cns3xxx_pcie_ops,
+		.sysdata = &sd,
+	};
+	u32 io_base = cnspci->res_io.start >> 16;
+	u32 mem_base = cnspci->res_mem.start >> 16;
+	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
+	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
+	u32 devfn = 0;
+	u8 tmp8;
+	u16 pos;
+	u16 dc;
+
+	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
+	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
+
+	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
+
+	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
+
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
+
+	if (!cnspci->linked)
+		return;
+
+	/* Set Device Max_Read_Request_Size to 128 byte */
+	devfn = PCI_DEVFN(1, 0);
+	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	dc &= ~(0x3 << 12);	/* Clear Device Control Register [14:12] */
+	pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	if (!(dc & (0x3 << 12)))
+		pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
+
+	/* Disable PCIe0 Interrupt Mask INTA to INTD */
+	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+}
+
+static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
+				      struct pt_regs *regs)
+{
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+	return 0;
+}
+
+static int __init cns3xxx_pcie_init(void)
+{
+	int i;
+
+	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+			"imprecise external abort");
+
+	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+		iotable_init(cns3xxx_pcie[i].cfg_bases,
+			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
+		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+		pci_common_init(&cns3xxx_pcie[i].hw_pci);
+	}
+
+	pci_assign_unassigned_resources();
+
+	return 0;
+}
+device_initcall(cns3xxx_pcie_init);
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 725e1a4..38e4470 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,18 +6,25 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
-	PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg |= (block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
 }
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
-	PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
+	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
@@ -25,22 +32,29 @@
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
 	/* write '1' to power down */
-	PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+	reg |= (block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_SOFT_RST_REG);
+
 	/*
 	 * bit 0, 28, 29 => program low to reset,
 	 * the other else program low and then high
 	 */
 	if (block & 0x30000001) {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
 	} else {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
-		PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg |= (block & PM_SOFT_RST_REG_MASK);
 	}
+
+	__raw_writel(reg, PM_SOFT_RST_REG);
 }
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
@@ -73,12 +87,13 @@
  */
 int cns3xxx_cpu_clock(void)
 {
+	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
 	int cpu;
 	int cpu_sel;
 	int div_sel;
 
-	cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
 
 	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 2ec3095..b280efb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
 
@@ -469,6 +470,11 @@
 	},
 };
 
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+	.defdcdc_default = true,
+};
+
 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
@@ -494,6 +500,7 @@
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* dcdc3 */
@@ -507,6 +514,7 @@
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* ldo1 */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index a91edfb..22eb97c 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -48,19 +48,16 @@
  * below 128M
  */
 static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+__arch_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = (128<<20) >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
 
-#define arch_adjust_zones(node, zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+#define arch_adjust_zones(zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 5da2cf4..f7a1258 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -752,6 +752,67 @@
 	platform_device_register(&dove_xor11_channel);
 }
 
+/*****************************************************************************
+ * SDIO
+ ****************************************************************************/
+static u64 sdio_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_sdio0_resources[] = {
+	{
+		.start	= DOVE_SDIO0_PHYS_BASE,
+		.end	= DOVE_SDIO0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO0,
+		.end	= IRQ_DOVE_SDIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio0 = {
+	.name		= "sdhci-mv",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio0_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio0_resources),
+};
+
+void __init dove_sdio0_init(void)
+{
+	platform_device_register(&dove_sdio0);
+}
+
+static struct resource dove_sdio1_resources[] = {
+	{
+		.start	= DOVE_SDIO1_PHYS_BASE,
+		.end	= DOVE_SDIO1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO1,
+		.end	= IRQ_DOVE_SDIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio1 = {
+	.name		= "sdhci-mv",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio1_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio1_resources),
+};
+
+void __init dove_sdio1_init(void)
+{
+	platform_device_register(&dove_sdio1);
+}
+
 void __init dove_init(void)
 {
 	int tclk;
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index b29e893..a51517c 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -36,5 +36,7 @@
 void dove_spi0_init(void);
 void dove_spi1_init(void);
 void dove_i2c_init(void);
+void dove_sdio0_init(void);
+void dove_sdio1_init(void);
 
 #endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index f2971b7..bef7046 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -82,6 +82,8 @@
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_sata_init(&dove_db_sata_data);
+	dove_sdio0_init();
+	dove_sdio1_init();
 	dove_spi0_init();
 	dove_spi1_init();
 	dove_uart0_init();
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3a1a855..f744f67 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data adssphere_flash_data = {
-	.width		= 4,
-};
-
-static struct resource adssphere_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device adssphere_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &adssphere_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &adssphere_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@
 static void __init adssphere_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&adssphere_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	ep93xx_register_eth(&adssphere_eth_data, 1);
 }
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e29bdef9..7f303976 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -185,7 +185,7 @@
 	INIT_CK(NULL,			"pll1",		&clk_pll1),
 	INIT_CK(NULL,			"fclk",		&clk_f),
 	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9092677..8e37a04 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -29,6 +29,7 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
@@ -215,8 +216,8 @@
 	spin_lock_irqsave(&syscon_swlock, flags);
 
 	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val |= set_bits;
 	val &= ~clear_bits;
+	val |= set_bits;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
 
@@ -348,6 +349,43 @@
 
 
 /*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width:	bank width in octets
+ * @start:	resource start address
+ * @size:	resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+				  resource_size_t start, resource_size_t size)
+{
+	ep93xx_flash_data.width		= width;
+
+	ep93xx_flash_resource.start	= start;
+	ep93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
  * EP93xx ethernet peripheral handling
  *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
@@ -620,6 +658,11 @@
 	.resource		= ep93xx_fb_resource,
 };
 
+static struct platform_device ep93xx_bl_device = {
+	.name		= "ep93xx-bl",
+	.id		= -1,
+};
+
 /**
  * ep93xx_register_fb - Register the framebuffer platform device.
  * @data:	platform specific framebuffer configuration (__initdata)
@@ -628,6 +671,7 @@
 {
 	ep93xxfb_data = *data;
 	platform_device_register(&ep93xx_fb_device);
+	platform_device_register(&ep93xx_bl_device);
 }
 
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3884182..c2ce903 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -38,39 +37,13 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data edb93xx_flash_data;
-
-static struct resource edb93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb93xx_flash_resource,
-};
-
-static void __init __edb93xx_register_flash(unsigned int width,
-			resource_size_t start, resource_size_t size)
-{
-	edb93xx_flash_data.width	= width;
-	edb93xx_flash_resource.start	= start;
-	edb93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&edb93xx_flash);
-}
-
 static void __init edb93xx_register_flash(void)
 {
 	if (machine_is_edb9307() || machine_is_edb9312() ||
 	    machine_is_edb9315()) {
-		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	} else {
-		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index a809618..d97168c 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data gesbc9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource gesbc9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gesbc9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gesbc9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gesbc9312_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@
 static void __init gesbc9312_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&gesbc9312_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&gesbc9312_eth_data, 0);
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 9a4413d..a6c0917 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -43,6 +43,9 @@
 
 unsigned int ep93xx_chip_revision(void);
 
+void ep93xx_register_flash(unsigned int width,
+			   resource_size_t start, resource_size_t size);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 1cc911b..2ba7763 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,31 +30,6 @@
  * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
-static struct physmap_flash_data micro9_flash_data;
-
-static struct resource micro9_flash_resource = {
-	.start		= EP93XX_CS1_PHYS_BASE,
-	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device micro9_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &micro9_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &micro9_flash_resource,
-};
-
-static void __init __micro9_register_flash(unsigned int width)
-{
-	micro9_flash_data.width = width;
-
-	platform_device_register(&micro9_flash);
-}
-
 static unsigned int __init micro9_detect_bootwidth(void)
 {
 	u32 v;
@@ -70,10 +44,17 @@
 
 static void __init micro9_register_flash(void)
 {
+	unsigned int width;
+
 	if (machine_is_micro9())
-		__micro9_register_flash(4);
+		width = 4;
 	else if (machine_is_micro9m() || machine_is_micro9s())
-		__micro9_register_flash(micro9_detect_bootwidth());
+		width = micro9_detect_bootwidth();
+	else
+		width = 0;
+
+	if (width)
+		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
 }
 
 
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 388aec9..5dded58 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -29,26 +28,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static struct physmap_flash_data simone_flash_data = {
-	.width		= 2,
-};
-
-static struct resource simone_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device simone_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &simone_flash_resource,
-	.dev = {
-		.platform_data	= &simone_flash_data,
-	},
-};
-
 static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
@@ -77,8 +56,7 @@
 static void __init simone_init_machine(void)
 {
 	ep93xx_init_devices();
-
-	platform_device_register(&simone_flash);
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&simone_eth_data, 1);
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index ae7319e..93aeab8 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
@@ -173,31 +172,13 @@
 };
 
 
-/*************************************************************************
- * NOR flash (TS-7200 only)
- *************************************************************************/
-static struct physmap_flash_data ts72xx_nor_data = {
-	.width		= 2,
-};
-
-static struct resource ts72xx_nor_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ts72xx_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev.platform_data	= &ts72xx_nor_data,
-	.resource		= &ts72xx_nor_resource,
-	.num_resources		= 1,
-};
-
 static void __init ts72xx_register_flash(void)
 {
+	/*
+	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
+	 */
 	if (board_is_ts7200()) {
-		platform_device_register(&ts72xx_nor_flash);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	} else {
 		resource_size_t start;
 
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index e3bc3f6..88b3dd8 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -232,7 +232,7 @@
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index a9ee8f0..27cafd1 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,8 +11,10 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
+
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
 
 		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
new file mode 100644
index 0000000..c5c0369
--- /dev/null
+++ b/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,193 @@
+config IMX_HAVE_DMA_V1
+	bool
+
+if ARCH_MX1
+
+config SOC_IMX1
+	select CPU_ARM920T
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+endif
+
+if ARCH_MX2
+
+config SOC_IMX21
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+config SOC_IMX27
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+choice
+	prompt "CPUs:"
+	default MACH_MX21
+
+config MACH_MX21
+	bool "i.MX21 support"
+	select SOC_IMX21
+	help
+	  This enables support for Freescale's MX2 based i.MX21 processor.
+
+config MACH_MX27
+	bool "i.MX27 support"
+	select SOC_IMX27
+	help
+	  This enables support for Freescale's MX2 based i.MX27 processor.
+
+endchoice
+
+endif
+
+if MACH_MX21
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
+
+if MACH_MX27
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM038
+	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_PCM038
+	default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+	prompt "PHYTEC PCM970 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Phytec's
+	  PCM970 evaluation board.
+
+endchoice
+
+config MACH_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27
+	  for wifi or eMMC.
+
+config MACH_EUKREA_CPUIMX27_USEUART4
+	bool "CPUIMX27 integrates UART4 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal UART4 used on CPUIMX27
+	  for bluetooth.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
new file mode 100644
index 0000000..46a9fdf
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y	:=  devices.o
+
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
+
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
similarity index 67%
rename from arch/arm/mach-mx2/Makefile.boot
rename to arch/arm/mach-imx/Makefile.boot
index e867398..7988a85 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,3 +1,7 @@
+zreladdr-$(CONFIG_ARCH_MX1)	:= 0x08008000
+params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+
 zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
 params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
 initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c
similarity index 89%
rename from arch/arm/mach-mx1/clock.c
rename to arch/arm/mach-imx/clock-imx1.c
index 6cf2d4a..c05096c 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -2,18 +2,17 @@
  *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
  */
 
 #include <linux/kernel.h>
@@ -29,7 +28,41 @@
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include "crm_regs.h"
+
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+/* CCM register addresses */
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xf
+
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+/* SCM register addresses */
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
 
 static int _clk_enable(struct clk *clk)
 {
@@ -596,7 +629,8 @@
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c
similarity index 100%
rename from arch/arm/mach-mx2/clock_imx21.c
rename to arch/arm/mach-imx/clock-imx21.c
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c
similarity index 99%
rename from arch/arm/mach-mx2/clock_imx27.c
rename to arch/arm/mach-imx/clock-imx27.c
index 0f0823c..5a1aa15 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -644,7 +644,7 @@
 	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c
similarity index 100%
rename from arch/arm/mach-mx2/cpu_imx27.c
rename to arch/arm/mach-imx/cpu-imx27.c
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 0000000..a8d94f0
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+
+#define imx1_add_i2c_imx(pdata)		\
+	imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+
+#define imx1_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
+#define imx1_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 0000000..42788e9
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+
+#define imx21_add_i2c_imx(pdata)	\
+	imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+
+#define imx21_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
+#define imx21_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
+#define imx21_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
+#define imx21_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+
+#define imx21_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+
+#define imx21_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
+#define imx21_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 0000000..65e7bb7
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+
+#define imx27_add_i2c_imx0(pdata)	\
+	imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
+#define imx27_add_i2c_imx1(pdata)	\
+	imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+
+#define imx27_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
+#define imx27_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
+#define imx27_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
+#define imx27_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
+#define imx27_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
+#define imx27_add_imx_uart5(pdata)	\
+	imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+
+#define imx27_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+
+#define imx27_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
+#define imx27_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
+#define imx27_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c
similarity index 67%
rename from arch/arm/mach-mx2/devices.c
rename to arch/arm/mach-imx/devices.c
index a0aeb8a..9c271a7 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -11,6 +11,9 @@
  *
  * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -32,6 +35,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/serial.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -40,38 +44,179 @@
 
 #include "devices.h"
 
-/*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
-	static struct resource mxc_spi_resources ## n[] = {			\
-		{								\
-			.start = baseaddr,					\
-			.end = baseaddr + SZ_4K - 1,				\
-			.flags = IORESOURCE_MEM,				\
-		}, {								\
-			.start = irq,						\
-			.end = irq,						\
-			.flags = IORESOURCE_IRQ,				\
-		},								\
-	};									\
-										\
-	struct platform_device mxc_spi_device ## n = {				\
-		.name = "spi_imx",						\
-		.id = n,							\
-		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
-		.resource = mxc_spi_resources ## n,				\
-	}
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+	{
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CSI_INT,
+		.end    = MX1_CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
 
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device imx1_camera_device = {
+	.name           = "mx1-camera",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx1_camera_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource       = imx1_camera_resources,
+	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
+};
+
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_RTC_INT,
+		.end    = MX1_RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = MX1_RTC_SAMINT,
+		.end    = MX1_RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	{
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_WDT_INT,
+		.end    = MX1_WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	{
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX1_USBD_INT0,
+		.end	= MX1_USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT1,
+		.end	= MX1_USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT2,
+		.end	= MX1_USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT3,
+		.end	= MX1_USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT4,
+		.end	= MX1_USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT5,
+		.end	= MX1_USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT6,
+		.end	= MX1_USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+		.irq = MX1_GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+		.irq = MX1_GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+		.irq = MX1_GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+		.irq = MX1_GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init imx1_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
 
 #ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
+static struct resource mx27_camera_resources[] = {
+	{
+	       .start = MX27_CSI_BASE_ADDR,
+	       .end = MX27_CSI_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_EMMA_PRP_BASE_ADDR,
+	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_INT_CSI,
+	       .end = MX27_INT_CSI,
+	       .flags = IORESOURCE_IRQ,
+	},{
+	       .start = MX27_INT_EMMAPRP,
+	       .end = MX27_INT_EMMAPRP,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device mx27_camera_device = {
+	.name = "mx2-camera",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mx27_camera_resources),
+	.resource = mx27_camera_resources,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
 #endif
 
 /*
@@ -140,34 +285,6 @@
 	.resource = mxc_w1_master_resources,
 };
 
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
-	static struct resource pfx ## _nand_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-	};								\
-									\
-	struct platform_device pfx ## _nand_device = {			\
-		.name = "mxc_nand",					\
-		.id = 0,						\
-		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
-		.resource = pfx ## _nand_resources,			\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
-
 /*
  * lcdc:
  * - i.MX1: the basic controller
@@ -218,32 +335,6 @@
 };
 #endif
 
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
-	static struct resource mxc_i2c_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_i2c_device ## n = {			\
-		.name = "imx-i2c",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
-		.resource = mxc_i2c_resources ## n,			\
-	}
-
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
-
 static struct resource mxc_pwm_resources[] = {
 	{
 		.start = MX2x_PWM_BASE_ADDR,
@@ -454,26 +545,21 @@
 
 #ifdef CONFIG_MACH_MX21
 DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+
+int __init imx21_register_gpios(void)
+{
+	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
 #endif
 
 #ifdef CONFIG_MACH_MX27
 DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
 
-int __init mxc_register_gpios(void)
+int __init imx27_register_gpios(void)
 {
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-	else
-#endif
-		return 0;
+	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
 }
+#endif
 
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
@@ -501,3 +587,23 @@
 };
 #endif
 
+static struct resource imx_kpp_resources[] = {
+	{
+		.start  = MX2x_KPP_BASE_ADDR,
+		.end    = MX2x_KPP_BASE_ADDR + 0xf,
+		.flags  = IORESOURCE_MEM
+	}, {
+		.start  = MX2x_INT_KPP,
+		.end    = MX2x_INT_KPP,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
+#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
new file mode 100644
index 0000000..efd4527
--- /dev/null
+++ b/arch/arm/mach-imx/devices.h
@@ -0,0 +1,32 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+#endif
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mx21_usbhc_device;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c
similarity index 98%
rename from arch/arm/plat-mxc/dma-mx1-mx2.c
rename to arch/arm/mach-imx/dma-v1.c
index e16014b..fd1d919 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ *  linux/arch/arm/plat-mxc/dma-v1.c
  *
  *  i.MX DMA registration and IRQ dispatching
  *
@@ -34,7 +34,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma-v1.h>
 
 #define DMA_DCR     0x00		/* Control Register */
 #define DMA_DISR    0x04		/* Interrupt status Register */
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
new file mode 100644
index 0000000..4edc5f4
--- /dev/null
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+#include <mach/ssi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI4 */
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD | GPIO_PUEN,
+	PC18_PF_SSI4_TXD | GPIO_PUEN,
+	PC19_PF_SSI4_CLK,
+#endif
+};
+
+static const uint32_t eukrea_mbimx27_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+};
+
+static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+	.keymap         = eukrea_mbimx27_keymap,
+	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
+	},
+};
+
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.dat3_card_detect = 1,
+};
+
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	/* SSI unit master I2S codec connected to SSI_PINS_4*/
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_TFSDIR |
+			MXC_AUDMUX_V1_PCR_TCLKDIR |
+			MXC_AUDMUX_V1_PCR_RFSDIR |
+			MXC_AUDMUX_V1_PCR_RCLKDIR |
+			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
+	);
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+	);
+#endif
+
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* ADS7846 Touchscreen controller init */
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	ads7846_dev_init();
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
+
+	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 0000000..df5f522
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+
+#include <mach/dma-v1.h>
+
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h
similarity index 92%
rename from arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
rename to arch/arm/mach-imx/include/mach/dma-v1.h
index 7c4870b..287431c 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
  *
  *  i.MX DMA registration and IRQ dispatching
  *
@@ -22,8 +22,10 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_DMA_H
-#define __ASM_ARCH_MXC_DMA_H
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
 
 #define IMX_DMA_CHANNELS  16
 
@@ -102,4 +104,4 @@
 
 int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
 
-#endif	/* _ASM_ARCH_MXC_DMA_H */
+#endif	/* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
similarity index 66%
rename from arch/arm/mach-mx2/mach-cpuimx27.c
rename to arch/arm/mach-imx/mach-cpuimx27.c
index 1f616dca..575ff1a 100644
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -26,20 +26,24 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int eukrea_cpuimx27_pins[] = {
@@ -49,10 +53,12 @@
 	PE14_PF_UART1_CTS,
 	PE15_PF_UART1_RTS,
 	/* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	PB26_AF_UART4_RTS,
 	PB28_AF_UART4_TXD,
 	PB29_AF_UART4_CTS,
 	PB31_AF_UART4_RXD,
+#endif
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -76,19 +82,47 @@
 	PD17_PF_I2C_DATA,
 	PD18_PF_I2C_CLK,
 	/* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+#endif
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	/* Quad UART's IRQ */
-	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
 #endif
+	/* OTG */
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
@@ -111,15 +145,12 @@
 	.resource = &eukrea_cpuimx27_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -127,9 +158,11 @@
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_cpuimx27_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_wdt,
+	&mxc_w1_master_device,
 };
 
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -182,34 +215,83 @@
 };
 #endif
 
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
 static void __init eukrea_cpuimx27_init(void)
 {
 	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
 		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&imx27_nand_device,
-			&eukrea_cpuimx27_nand_board_info);
+	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	/* SDHC2 can be used for Wifi */
 	mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+	imx27_add_imx_uart3(&uart_pdata);
 #endif
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 	platform_device_register(&serial_device);
 #endif
 
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
 #endif
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
similarity index 85%
rename from arch/arm/mach-mx2/mach-imx27lite.c
rename to arch/arm/mach-imx/mach-imx27lite.c
index b5710bf..22a2b5d 100644
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -26,10 +22,9 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mx27lite_pins[] = {
@@ -59,7 +54,7 @@
 	PF23_AIN_FEC_TX_EN,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -71,7 +66,7 @@
 {
 	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
 		"imx27lite");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
similarity index 81%
rename from arch/arm/mach-mx1/mach-mx1ads.c
rename to arch/arm/mach-imx/mach-mx1ads.c
index 51f3cfd..77a760c 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,10 +26,10 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
 static int mx1ads_pins[] = {
@@ -58,12 +58,12 @@
  * UARTs platform data
  */
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+       
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
@@ -75,8 +75,8 @@
 };
 
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -98,7 +98,7 @@
 	}
 };
 
-static struct imxi2c_platform_data mx1ads_i2c_data = {
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -121,8 +121,8 @@
 		ARRAY_SIZE(mx1ads_pins), "mx1ads");
 
 	/* UART */
-	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
-	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
@@ -131,7 +131,7 @@
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
-	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+	imx1_add_i2c_imx(&mx1ads_i2c_data);
 }
 
 static void __init mx1ads_timer_init(void)
@@ -145,8 +145,8 @@
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
@@ -155,8 +155,8 @@
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
similarity index 77%
rename from arch/arm/mach-mx2/mach-mx21ads.c
rename to arch/arm/mach-imx/mach-mx21ads.c
index 113e58d..96d7f81 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -28,15 +24,49 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imx-uart.h>
 #include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
 
+#include "devices-imx21.h"
 #include "devices.h"
 
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
 static unsigned int mx21ads_pins[] = {
 
 	/* CS8900A */
@@ -133,14 +163,13 @@
 	.resource = &mx21ads_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxuart_platform_data uart_norts_pdata = {
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 
-
 static int mx21ads_fb_init(struct platform_device *pdev)
 {
 	u16 tmp;
@@ -227,7 +256,8 @@
 	.exit = mx21ads_sdhc_exit,
 };
 
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -263,12 +293,12 @@
 	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
 			"mx21ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	imx21_add_imx_uart0(&uart_pdata_rts);
+	imx21_add_imx_uart2(&uart_pdata_norts);
+	imx21_add_imx_uart3(&uart_pdata_rts);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
similarity index 74%
rename from arch/arm/mach-mx2/mach-mx27_3ds.c
rename to arch/arm/mach-imx/mach-mx27_3ds.c
index b2f4e0d..e66ffaa 100644
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -12,23 +12,25 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
  */
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mx27pdk_pins[] = {
@@ -58,7 +60,7 @@
 	PF23_AIN_FEC_TX_EN,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -66,12 +68,34 @@
 	&mxc_fec_device,
 };
 
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx27_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx27_3ds_keymap_data = {
+	.keymap		= mx27_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
+};
+
 static void __init mx27pdk_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
similarity index 82%
rename from arch/arm/mach-mx2/mach-mx27ads.c
rename to arch/arm/mach-imx/mach-mx27ads.c
index 6ce3236..9c77da9 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,16 +28,44 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
 static unsigned int mx27ads_pins[] = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
@@ -141,7 +165,8 @@
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -168,7 +193,7 @@
 	.resource = &mx27ads_flash_resource,
 };
 
-static struct imxi2c_platform_data mx27ads_i2c_data = {
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -263,20 +288,8 @@
 	&mxc_w1_master_device,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mx27ads_board_init(void)
@@ -284,18 +297,18 @@
 	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 			"mx27ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_imx_uart3(&uart_pdata);
+	imx27_add_imx_uart4(&uart_pdata);
+	imx27_add_imx_uart5(&uart_pdata);
+	imx27_add_mxc_nand(&mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
-	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	imx27_add_i2c_imx1(&mx27ads_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
@@ -342,4 +355,3 @@
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
similarity index 85%
rename from arch/arm/mach-mx2/mach-mxt_td60.c
rename to arch/arm/mach-imx/mach-mxt_td60.c
index bc38559..a3a1e45 100644
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,14 +28,13 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static unsigned int mxt_td60_pins[] __initdata = {
@@ -128,12 +123,13 @@
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -173,7 +169,7 @@
 	},
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -239,14 +235,8 @@
 	&mxc_fec_device,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mxt_td60_board_init(void)
@@ -254,10 +244,10 @@
 	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
 			"MXT_TD60");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -265,8 +255,8 @@
 	i2c_register_board_info(1, mxt_td60_i2c2_devices,
 				ARRAY_SIZE(mxt_td60_i2c2_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
+	imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
similarity index 80%
rename from arch/arm/mach-mx2/mach-pca100.c
rename to arch/arm/mach-imx/mach-pca100.c
index a87422e..6c92dea 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,12 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
 #include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 #include <mach/mxc_nand.h>
@@ -49,11 +44,16 @@
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include <mach/imxfb.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+#define SPI1_SS0 (GPIO_PORTD + 28)
+#define SPI1_SS1 (GPIO_PORTD + 27)
+#define SD2_CD (GPIO_PORTC + 29)
 
 static int pca100_pins[] = {
 	/* UART1 */
@@ -68,6 +68,7 @@
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	SD2_CD | GPIO_GPIO | GPIO_IN,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -131,13 +132,42 @@
 	PD23_AF_USBH2_DATA2,
 	PD24_AF_USBH2_DATA1,
 	PD26_AF_USBH2_DATA5,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA26_PF_PS,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA31_PF_OE_ACD,
+	/* free GPIO */
+	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
+	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
+	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pca100_nand_board_info = {
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -148,7 +178,7 @@
 	&mxc_wdt,
 };
 
-static struct imxi2c_platform_data pca100_i2c_1_data = {
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -189,9 +219,9 @@
 	},
 };
 
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
 
-static struct spi_imx_master pca100_spi_0_data = {
+static const struct spi_imx_master pca100_spi0_data __initconst = {
 	.chipselect	= pca100_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
@@ -253,6 +283,7 @@
 	.exit = pca100_sdhc2_exit,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -276,6 +307,7 @@
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -297,6 +329,45 @@
 }
 __setup("otg_mode=", pca100_otg_mode);
 
+/* framebuffer info */
+static struct imx_fb_videomode pca100_fb_modes[] = {
+	{
+		.mode = {
+			.name		= "EMERGING-ETV570G0DHU",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39722, /* in ps (25.175 MHz) */
+			.hsync_len	= 30,
+			.left_margin	= 114,
+			.right_margin	= 16,
+			.vsync_len	= 3,
+			.upper_margin	= 32,
+			.lower_margin	= 0,
+		},
+		/*
+		 * TFT
+		 * Pixel pol active high
+		 * HSYNC active low
+		 * VSYNC active low
+		 * use HSYNC for ACD count
+		 * line clock disable while idle
+		 * always enable line clock even if no data
+		 */
+		.pcr = 0xf0c08080,
+		.bpp = 16,
+	},
+};
+
+static struct imx_fb_platform_data pca100_fb_data = {
+	.mode = pca100_fb_modes,
+	.num_modes = ARRAY_SIZE(pca100_fb_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init pca100_init(void)
 {
 	int ret;
@@ -320,33 +391,24 @@
 
 	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pca100_i2c_devices,
 				ARRAY_SIZE(pca100_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+	imx27_add_i2c_imx1(&pca100_i2c1_data);
 
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+	imx27_add_spi_imx0(&pca100_spi_0_data);
 #endif
 
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
@@ -372,6 +434,8 @@
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 	}
 
+	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
similarity index 90%
rename from arch/arm/mach-mx2/mach-pcm038.c
rename to arch/arm/mach-imx/mach-pcm038.c
index 36c8943..9212e8f 100644
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -35,14 +35,12 @@
 #include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 static int pcm038_pins[] = {
@@ -162,17 +160,12 @@
 	.resource = &pcm038_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -192,7 +185,7 @@
 	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -215,7 +208,7 @@
 
 static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
 
-static struct spi_imx_master pcm038_spi_0_data = {
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
 	.chipselect = pcm038_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
 };
@@ -305,18 +298,18 @@
 
 	pcm038_init_sram();
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+	imx27_add_mxc_nand(&pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+	imx27_add_i2c_imx1(&pcm038_i2c1_data);
 
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -326,7 +319,7 @@
 	/* MC13783 IRQ */
 	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
 
-	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	imx27_add_spi_imx0(&pcm038_spi0_data);
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
similarity index 89%
rename from arch/arm/mach-mx1/mach-scb9328.c
rename to arch/arm/mach-imx/mach-scb9328.c
index 7587a7a..88bf0d1 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -22,17 +22,17 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash
  */
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -70,13 +70,13 @@
 static struct resource dm9000x_resources[] = {
 	{
 		.name	= "address area",
-		.start	= IMX_CS5_PHYS,
-		.end	= IMX_CS5_PHYS + 1,
+		.start	= MX1_CS5_PHYS,
+		.end	= MX1_CS5_PHYS + 1,
 		.flags	= IORESOURCE_MEM,	/* address access */
 	}, {
 		.name	= "data area",
-		.start	= IMX_CS5_PHYS + 4,
-		.end	= IMX_CS5_PHYS + 5,
+		.start	= MX1_CS5_PHYS + 4,
+		.end	= MX1_CS5_PHYS + 5,
 		.flags	= IORESOURCE_MEM,	/* data access */
 	}, {
 		.start	= IRQ_GPIOC(3),
@@ -108,14 +108,13 @@
 			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
 }
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.init = uart1_mxc_init,
 	.exit = uart1_mxc_exit,
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -131,7 +130,7 @@
  */
 static void __init scb9328_init(void)
 {
-	mxc_register_device(&imx_uart1_device, &uart_pdata);
+	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c
similarity index 67%
rename from arch/arm/mach-mx1/generic.c
rename to arch/arm/mach-imx/mm-imx1.c
index 7f9fc10..9be92b9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -3,7 +3,7 @@
  *  Created: april 20th, 2004
  *  Copyright: Synertronixx GmbH
  *
- *  Common code for i.MX machines
+ *  Common code for i.MX1 machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -31,23 +26,25 @@
 
 static struct map_desc imx_io_desc[] __initdata = {
 	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
+		.virtual = MX1_IO_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+		.length = MX1_IO_SIZE,
+		.type = MT_DEVICE
 	}
 };
 
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
 
+int imx1_register_gpios(void);
+
 void __init mx1_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
+	imx1_register_gpios();
 }
-
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
similarity index 95%
rename from arch/arm/mach-mx2/mm-imx21.c
rename to arch/arm/mach-imx/mm-imx21.c
index 6413431..12faeeaa 100644
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx21.c
+ * arch/arm/mach-imx/mm-imx21.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@
 	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
 
+int imx21_register_gpios(void);
+
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+	imx21_register_gpios();
 }
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
similarity index 95%
rename from arch/arm/mach-mx2/mm-imx27.c
rename to arch/arm/mach-imx/mm-imx27.c
index 3366ed4..a246229 100644
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx27.c
+ * arch/arm/mach-imx/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@
 	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
+int imx27_register_gpios(void);
+
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+	imx27_register_gpios();
 }
diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
similarity index 100%
rename from arch/arm/mach-mx1/ksym_mx1.c
rename to arch/arm/mach-imx/mx1-camera-fiq-ksym.c
diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
similarity index 100%
rename from arch/arm/mach-mx1/mx1_camera_fiq.S
rename to arch/arm/mach-imx/mx1-camera-fiq.S
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx2/pcm970-baseboard.c
rename to arch/arm/mach-imx/pcm970-baseboard.c
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
new file mode 100644
index 0000000..afc17ce
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -0,0 +1,46 @@
+/*
+ * i.MX27 Power Management Routines
+ *
+ * Based on Freescale's BSP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/system.h>
+#include <mach/mx27.h>
+
+static int mx27_suspend_enter(suspend_state_t state)
+{
+	u32 cscr;
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* Clear MPEN and SPEN to disable MPLL/SPLL */
+		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr &= 0xFFFFFFFC;
+		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		/* Executes WFI */
+		arch_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mx27_suspend_ops = {
+	.enter = mx27_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init mx27_pm_init(void)
+{
+	suspend_set_ops(&mx27_suspend_ops);
+	return 0;
+}
+
+device_initcall(mx27_pm_init);
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
new file mode 100644
index 0000000..5f96e15
--- /dev/null
+++ b/arch/arm/mach-integrator/common.h
@@ -0,0 +1 @@
+void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index b02cfc0..8f4fb6d 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/termios.h>
@@ -30,6 +31,7 @@
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
+#include <asm/pgtable.h>
 
 static struct amba_pl010_data integrator_uart_data;
 
@@ -119,8 +121,13 @@
 	.rate	= 14745600,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
 	}, {	/* UART1 */
@@ -215,3 +222,13 @@
 }
 
 EXPORT_SYMBOL(cm_control);
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 227cf4d..6ab5a03 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -48,6 +48,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "common.h"
+
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -502,6 +504,7 @@
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ap_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index cde57b2..05db40e 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -43,6 +43,8 @@
 
 #include <plat/timer-sp.h>
 
+#include "common.h"
+
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
@@ -601,6 +603,7 @@
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= intcp_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 9cef059..6467d99 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -505,10 +505,10 @@
 	/*
 	 * Hook in our fault handler for PCI errors
 	 */
-	hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 
 	spin_lock_irqsave(&v3_lock, flags);
 
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 25b1da9..7415e43 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -69,6 +69,4 @@
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
-#define PFN_TO_NID(addr)	(0)
-
 #endif
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 6d5a908..773ea0c 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -987,7 +987,7 @@
 		iop13xx_atux_setup();
 	}
 
-	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
+	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
 			"imprecise external abort");
 }
 
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 90771ca..f797c5f 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -209,7 +209,7 @@
 			"the needed workaround has not been configured in");
 #endif
 
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
 				"PCI config cycle to non-existent device");
 }
 
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 4b0e598..563819a 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -229,7 +229,7 @@
 {
 	ixp23xx_pci_common_init();
 
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
 			"PCI config cycle to non-existent device");
 
 	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index e3181534..61cd4d6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -348,7 +348,7 @@
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+void __init ixp4xx_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -356,7 +356,7 @@
 	/*
 	 * Only adjust if > 64M on current system
 	 */
-	if (node || (zone_size[0] <= sz))
+	if (zone_size[0] <= sz)
 		return;
 
 	zone_size[1] = zone_size[0] - sz;
@@ -382,7 +382,8 @@
 
 
 	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
+			"imprecise external abort");
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 98f5e5e..0136eaa 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -16,10 +16,10 @@
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	ixp4xx_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163..cc25501 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -75,6 +75,13 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Client Board.
 
+config MACH_OPENRD_ULTIMATE
+	bool "Marvell OpenRD Ultimate Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Ultimate Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
@@ -87,6 +94,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Internet Space v2 NAS.
 
+config MACH_NETSPACE_MAX_V2
+	bool "LaCie Network Space Max v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space Max v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help
@@ -99,6 +112,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
+config MACH_T5325
+	bool "HP t5325 Thin Client"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP t5325 Thin Client.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index c0cd5d3..295d7ba 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -12,7 +12,9 @@
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 2e69168f..8d03bce 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -31,6 +31,8 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_PCIE1_IO		0xd0
+#define ATTR_PCIE1_MEM		0xd8
 #define ATTR_SRAM		0x01
 
 /*
@@ -106,17 +108,21 @@
 		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
 	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
 		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
+	setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
 
 	/*
 	 * Setup window for NAND controller.
 	 */
-	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+	setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
 	/*
 	 * Setup window for SRAM.
 	 */
-	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+	setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
 		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 6072eaa..9dd67c7 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -44,6 +44,11 @@
 		.length		= KIRKWOOD_PCIE_IO_SIZE,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
+		.length		= KIRKWOOD_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
@@ -402,7 +407,7 @@
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (rev == 0)  /* catch all Kirkwood Z0's */
+	if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
 		mvsdio_data->clock = 100000000;
 	else
 		mvsdio_data->clock = 200000000;
@@ -847,8 +852,10 @@
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1))
+
+	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1)) ||
+	    (dev == MV88F6282_DEV_ID))
 		return 200000000;
 
 	return 166666667;
@@ -891,13 +898,22 @@
 			return "MV88F6192-Z0";
 		else if (rev == MV88F6192_REV_A0)
 			return "MV88F6192-A0";
+		else if (rev == MV88F6192_REV_A1)
+			return "MV88F6192-A1";
 		else
 			return "MV88F6192-Rev-Unsupported";
 	} else if (dev == MV88F6180_DEV_ID) {
 		if (rev == MV88F6180_REV_A0)
 			return "MV88F6180-Rev-A0";
+		else if (rev == MV88F6180_REV_A1)
+			return "MV88F6180-Rev-A1";
 		else
 			return "MV88F6180-Rev-Unsupported";
+	} else if (dev == MV88F6282_DEV_ID) {
+		if (rev == MV88F6282_REV_A0)
+			return "MV88F6282-Rev-A0";
+		else
+			return "MV88F6282-Rev-Unsupported";
 	} else {
 		return "Device-Unknown";
 	}
@@ -949,12 +965,14 @@
 static int __init kirkwood_clock_gate(void)
 {
 	unsigned int curr = readl(CLOCK_GATING_CTRL);
+	u32 dev, rev;
 
+	kirkwood_pcie_id(&dev, &rev);
 	printk(KERN_DEBUG "Gating clock of unused units\n");
 	printk(KERN_DEBUG "before: 0x%08x\n", curr);
 
 	/* Make sure those units are accessible */
-	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
 
 	/* For SATA: first shutdown the phy */
 	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
@@ -979,6 +997,18 @@
 		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
 	}
 
+	/* For PCIe 1: first shutdown the phy */
+	if (dev == MV88F6282_DEV_ID) {
+		if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
+			writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+			while (1)
+				if (readl(PCIE1_STATUS) & 0x1)
+					break;
+			writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+		}
+	} else  /* keep this bit set for devices that don't have PCIe1 */
+		kirkwood_clk_ctrl |= CGC_PEX1;
+
 	/* Now gate clock the required units */
 	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
 	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05e8a8a..5b2c1c1 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -18,6 +18,9 @@
 struct mtd_partition;
 struct mtd_info;
 
+#define KW_PCIE0	(1 << 0)
+#define KW_PCIE1	(1 << 1)
+
 /*
  * Basic Kirkwood init functions used early by machine-setup.
  */
@@ -34,7 +37,7 @@
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(void);
+void kirkwood_pcie_init(unsigned int portmask);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 39bdf4b..16f6691 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -51,6 +51,14 @@
 };
 
 static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
 	MPP37_GPIO,
 	MPP38_GPIO,
 	0
@@ -74,9 +82,15 @@
 
 static int __init db88f6281_pci_init(void)
 {
-	if (machine_is_db88f6281_bp())
-		kirkwood_pcie_init();
+	if (machine_is_db88f6281_bp()) {
+		u32 dev, rev;
 
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
 	return 0;
 }
 subsys_initcall(db88f6281_pci_init);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 418f501..aff0e13 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -59,8 +59,9 @@
 #define CGC_SATA1		(1 << 15)
 #define CGC_XOR1		(1 << 16)
 #define CGC_CRYPTO		(1 << 17)
+#define CGC_PEX1		(1 << 18)
 #define CGC_GE1			(1 << 19)
 #define CGC_TDM			(1 << 20)
-#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+#define CGC_RESERVED		(0x6 << 21)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index f00a0a4..9da2eb5 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -23,6 +23,7 @@
 #define IRQ_KIRKWOOD_XOR_10	7
 #define IRQ_KIRKWOOD_XOR_11	8
 #define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_PCIE1	10
 #define IRQ_KIRKWOOD_GE00_SUM	11
 #define IRQ_KIRKWOOD_GE01_SUM	15
 #define IRQ_KIRKWOOD_USB	19
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index a15cf0e..d141af4 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -16,36 +16,48 @@
  * Marvell Kirkwood address maps.
  *
  * phys
- * e0000000	PCIe Memory space
+ * e0000000	PCIe #0 Memory space
+ * e8000000	PCIe #1 Memory space
  * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- * f4000000	Security Accelerator SRAM
+ * f2000000	PCIe #0 I/O space
+ * f3000000	PCIe #1 I/O space
+ * f4000000	NAND controller address window
+ * f5000000	Security Accelerator SRAM
  *
  * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
+ * fed00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	1M	PCIe #0 I/O space
+ * fef00000	f3000000	1M	PCIe #1 I/O space
  */
 
-#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf5000000
 #define KIRKWOOD_SRAM_SIZE		SZ_2K
 
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf4000000
 #define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
+#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
+
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
 #define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
 #define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE		SZ_128M
+
 /*
  * Register Map
  */
@@ -72,6 +84,9 @@
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 #define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
 #define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -107,8 +122,12 @@
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
 #define MV88F6192_REV_A0	2
+#define MV88F6192_REV_A1	3
 
 #define MV88F6180_DEV_ID	0x6180
 #define MV88F6180_REV_A0	2
+#define MV88F6180_REV_A1	3
 
+#define MV88F6282_DEV_ID	0x6282
+#define MV88F6282_REV_A0	0
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
new file mode 100644
index 0000000..e21272e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+ *
+ * Platform data structure for Network Space v2 LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NS2_H
+#define __MACH_LEDS_NS2_H
+
+struct ns2_led {
+	const char	*name;
+	const char	*default_trigger;
+	unsigned	cmd;
+	unsigned	slow;
+};
+
+struct ns2_led_platform_data {
+	int		num_leds;
+	struct ns2_led	*leds;
+};
+
+#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index a5900f6..065187d 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -23,7 +23,8 @@
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+	if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
+	    (dev == MV88F6282_DEV_ID))
 		return MPP_F6281_MASK;
 	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
 		return MPP_F6192_MASK;
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index bc74278..9b0a94d 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -11,7 +11,7 @@
 #ifndef __KIRKWOOD_MPP_H
 #define __KIRKWOOD_MPP_H
 
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
 	/* MPP number */		((_num) & 0xff) | \
 	/* MPP select value */		(((_sel) & 0xf) << 8) | \
 	/* may be input signal */	((!!(_in)) << 12) | \
@@ -19,282 +19,332 @@
 	/* available on F6180 */	((!!(_F6180)) << 14) | \
 	/* available on F6190 */	((!!(_F6190)) << 15) | \
 	/* available on F6192 */	((!!(_F6192)) << 16) | \
-	/* available on F6281 */	((!!(_F6281)) << 17))
+	/* available on F6281 */	((!!(_F6281)) << 17) | \
+	/* available on F6282 */	((!!(_F6282)) << 18))
 
 #define MPP_NUM(x)	((x) & 0xff)
 #define MPP_SEL(x)	(((x) >> 8) & 0xf)
 
-				/*   num sel  i  o  6180 6190 6192 6281 */
+				/*   num sel  i  o  6180 6190 6192 6281 6282 */
 
-#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
-#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0,   0 )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0,   0 )
 
-#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
-#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
-#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
-#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1,   1 )
 
-#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1,   1 )
 
-#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1,   1 )
 
-#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1,   0 )
 
-#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1,   0 )
 
-#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 1, 0,   0,   0,   0,   1 )
 
-#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,    1,  1,   1    )
-#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1,   0 )
 
-#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
 
-#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 1, 0, 0,   0,   0,   0,   1 )
 
-#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 1, 0,   0,   0,   0,   1 )
 
-#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 1, 0,   0,   0,   0,   1 )
 
-#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 1, 1, 0,   0,   0,   0,   1 )
 
-#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 1, 0,   0,   0,   0,   1 )
 
-#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1,   1 )
 
-#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1,   1 )
 
-#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 1, 1, 0,   0,   0,   0,   1 )
 
-#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 1, 1, 0,   0,   0,   0,   1 )
 
-#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
-#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP_MAX			49
 
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 5e6f711..c6b92b4 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -155,7 +155,7 @@
 static int __init mv88f6281gtw_ge_pci_init(void)
 {
 	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 3ae158d..d26bf32 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -39,6 +39,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
 #include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
@@ -126,6 +127,18 @@
 	}
 	if (err)
 		pr_err("netspace_v2: failed to setup SATA0 power\n");
+
+	if (machine_is_netspace_max_v2()) {
+		err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
+		if (err == 0) {
+			err = gpio_direction_output(
+					NETSPACE_V2_GPIO_SATA1_POWER, 1);
+			if (err)
+				gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
+		}
+		if (err)
+			pr_err("netspace_v2: failed to setup SATA1 power\n");
+	}
 }
 
 /*****************************************************************************
@@ -160,36 +173,12 @@
  * GPIO LEDs
  ****************************************************************************/
 
-/*
- * The blue front LED is wired to a CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- *  cmd_led   |  slow_led  | /SATA active | LED state
- *            |            |              |
- *     1      |     0      |      x       |  off
- *     -      |     1      |      x       |  on
- *     0      |     0      |      1       |  on
- *     0      |     0      |      0       |  blink (rate 300ms)
- */
-
 #define NETSPACE_V2_GPIO_RED_LED	12
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name			= "ns_v2:blue:sata",
-		.default_trigger	= "default-on",
-		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.active_low		= 1,
-	},
-	{
-		.name			= "ns_v2:red:fail",
-		.gpio			= NETSPACE_V2_GPIO_RED_LED,
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -206,22 +195,33 @@
 	},
 };
 
-static void __init netspace_v2_gpio_leds_init(void)
-{
-	int err;
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
 
-	/* Configure register slow_led to allow SATA activity LED blinking */
-	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
 
-	platform_device_register(&netspace_v2_gpio_leds);
-}
+static struct ns2_led netspace_v2_led_pins[] = {
+	{
+		.name	= "ns_v2:blue:sata",
+		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data netspace_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
+	.leds		= netspace_v2_led_pins,
+};
+
+static struct platform_device netspace_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_leds_data,
+	},
+};
 
 /*****************************************************************************
  * Timer
@@ -249,17 +249,21 @@
 	MPP4_NF_IO6,
 	MPP5_NF_IO7,
 	MPP6_SYSRST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP12_GPO,		/* Red led */
 	MPP14_GPIO,		/* USB fuse */
 	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
 	MPP18_NF_IO0,
 	MPP19_NF_IO1,
 	MPP20_SATA1_ACTn,
 	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
 	MPP24_GPIO,		/* USB mode select */
 	MPP25_GPIO,		/* Fan rotation fail */
 	MPP26_GPIO,		/* USB device vbus */
@@ -268,6 +272,7 @@
 	MPP30_GPIO,		/* Blue led (command register) */
 	MPP31_GPIO,		/* Board power off */
 	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
 	0
 };
 
@@ -299,7 +304,8 @@
 	i2c_register_board_info(0, netspace_v2_i2c_info,
 				ARRAY_SIZE(netspace_v2_i2c_info));
 
-	netspace_v2_gpio_leds_init();
+	platform_device_register(&netspace_v2_leds);
+	platform_device_register(&netspace_v2_gpio_leds);
 	platform_device_register(&netspace_v2_gpio_buttons);
 
 	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
@@ -332,3 +338,15 @@
 	.timer		= &netspace_v2_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 8a2bb02..2bd14c5 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -270,8 +270,8 @@
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -306,8 +306,8 @@
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -315,20 +315,20 @@
 	MPP15_GPIO,		/* Rear power switch (auto|off) */
 	MPP16_GPIO,		/* SATA HDD1 power */
 	MPP17_GPIO,		/* SATA HDD2 power */
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
 	MPP28_GPIO,		/* USB enable host vbus */
 	MPP29_GPIO,		/* CPLD extension ALE */
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP34_GPIO,		/* Rear Push button */
 	MPP35_GPIO,		/* Inhibit switch power-off */
 	MPP36_GPIO,		/* SATA HDD1 presence */
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index ad3f1ec..fd64cd2 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-kirkwood/openrd-setup.c
  *
- * Marvell OpenRD (Base|Client) Board Setup
+ * Marvell OpenRD (Base|Client|Ultimate) Board Setup
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -73,9 +73,15 @@
 
 	kirkwood_ehci_init();
 
+	if (machine_is_openrd_ultimate()) {
+		openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
+
 	kirkwood_ge00_init(&openrd_ge00_data);
-	if (machine_is_openrd_client())
+	if (!machine_is_openrd_base())
 		kirkwood_ge01_init(&openrd_ge01_data);
+
 	kirkwood_sata_init(&openrd_sata_data);
 	kirkwood_sdio_init(&openrd_mvsdio_data);
 
@@ -84,8 +90,10 @@
 
 static int __init openrd_pci_init(void)
 {
-	if (machine_is_openrd_base() || machine_is_openrd_client())
-		kirkwood_pcie_init();
+	if (machine_is_openrd_base() ||
+	    machine_is_openrd_client() ||
+	    machine_is_openrd_ultimate())
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -116,3 +124,16 @@
 	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index dee1eff..55e7f00 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,29 +18,43 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
-
-#define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
-
 void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
-	*dev = orion_pcie_dev_id(PCIE_BASE);
-	*rev = orion_pcie_rev(PCIE_BASE);
+	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
 }
 
-static int pcie_valid_config(int bus, int dev)
+struct pcie_port {
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	int			irq;
+	struct resource		res[2];
+};
+
+static int pcie_port_map[2];
+static int num_pcie_ports;
+
+static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	return sys->private_data;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
 	 * Don't go out when trying to access --
 	 * 1. nonexisting device on local bus
 	 * 2. where there's no device connected (no link)
 	 */
-	if (bus == 0 && dev == 0)
+	if (bus == pp->root_bus_nr && dev == 0)
 		return 1;
 
-	if (!orion_pcie_link_up(PCIE_BASE))
+	if (!orion_pcie_link_up(pp->base))
 		return 0;
 
-	if (bus == 0 && dev != 1)
+	if (bus == pp->root_bus_nr && dev != 1)
 		return 0;
 
 	return 1;
@@ -52,22 +66,22 @@
  * and then reading the PCIE_CONF_DATA register. Need to make sure these
  * transactions are atomic.
  */
-static DEFINE_SPINLOCK(kirkwood_pcie_lock);
 
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -75,15 +89,16 @@
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -93,50 +108,98 @@
 	.write = pcie_wr_conf,
 };
 
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	struct resource *res;
-	extern unsigned int kirkwood_clk_ctrl;
-
-	/*
-	 * Generic PCIe unit setup.
-	 */
-	orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
-
-	/*
-	 * Request resources.
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("pcie_setup unable to alloc resources");
+	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
 	 * IORESOURCE_IO
 	 */
-	res[0].name = "PCIe I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIe IO resource failed\n");
-	sys->resource[0] = &res[0];
+	pp->res[0].name = "PCIe 0 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
 
 	/*
 	 * IORESOURCE_MEM
 	 */
-	res[1].name = "PCIe Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
-	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	sys->resource[1] = &res[1];
+	pp->res[1].name = "PCIe 0 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
 
+static void __init pcie1_ioresources_init(struct pcie_port *pp)
+{
+	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE1;
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	pp->res[0].name = "PCIe 1 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	pp->res[1].name = "PCIe 1 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
+
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	extern unsigned int kirkwood_clk_ctrl;
+	struct pcie_port *pp;
+	int index;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	index = pcie_port_map[nr];
+	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		panic("PCIe: failed to allocate pcie_port data");
+	sys->private_data = pp;
+	pp->root_bus_nr = sys->busnr;
+	spin_lock_init(&pp->conf_lock);
+
+	switch (index) {
+	case 0:
+		kirkwood_clk_ctrl |= CGC_PEX0;
+		pcie0_ioresources_init(pp);
+		break;
+	case 1:
+		kirkwood_clk_ctrl |= CGC_PEX1;
+		pcie1_ioresources_init(pp);
+		break;
+	default:
+		panic("PCIe setup: invalid controller %d", index);
+	}
+
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe%d IO resource failed\n", index);
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe%d Memory resource failed\n", index);
+
+	sys->resource[0] = &pp->res[0];
+	sys->resource[1] = &pp->res[1];
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
-	kirkwood_clk_ctrl |= CGC_PEX0;
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
 
 	return 1;
 }
@@ -163,7 +226,7 @@
 {
 	struct pci_bus *bus;
 
-	if (nr == 0) {
+	if (nr < num_pcie_ports) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
 	} else {
 		bus = NULL;
@@ -175,18 +238,37 @@
 
 static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	return IRQ_KIRKWOOD_PCIE;
+	struct pcie_port *pp = bus_to_port(dev->bus);
+
+	return pp->irq;
 }
 
 static struct hw_pci kirkwood_pci __initdata = {
-	.nr_controllers	= 1,
 	.swizzle	= pci_std_swizzle,
 	.setup		= kirkwood_pcie_setup,
 	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-void __init kirkwood_pcie_init(void)
+static void __init add_pcie_port(int index, unsigned long base)
 {
+	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		printk(KERN_INFO "link up\n");
+		pcie_port_map[num_pcie_ports++] = index;
+	} else
+		printk(KERN_INFO "link down, ignoring\n");
+}
+
+void __init kirkwood_pcie_init(unsigned int portmask)
+{
+	if (portmask & KW_PCIE0)
+		add_pcie_port(0, PCIE_VIRT_BASE);
+
+	if (portmask & KW_PCIE1)
+		add_pcie_port(1, PCIE1_VIRT_BASE);
+
+	kirkwood_pci.nr_controllers = num_pcie_ports;
 	pci_common_init(&kirkwood_pci);
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 3bf6304..c34718c 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -71,7 +71,7 @@
 static int __init rd88f6192_pci_init(void)
 {
 	if (machine_is_rd88f6192_nas())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31708dd..3d14771 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -107,7 +107,7 @@
 static int __init rd88f6281_pci_init(void)
 {
 	if (machine_is_rd88f6281())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
new file mode 100644
index 0000000..d01bf89
--- /dev/null
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -0,0 +1,194 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition hp_t5325_partitions[] = {
+	{
+		.name		= "u-boot env",
+		.size		= SZ_64K,
+		.offset		= SZ_512K + SZ_256K,
+	},
+	{
+		.name		= "permanent u-boot env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "HP env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+	{
+		.name		= "u-boot",
+		.size		= SZ_512K,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "SSD firmware",
+		.size		= SZ_256K,
+		.offset		= SZ_512K,
+	},
+};
+
+const struct flash_platform_data hp_t5325_flash = {
+	.type		= "mx25l8005",
+	.name		= "spi_flash",
+	.parts		= hp_t5325_partitions,
+	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
+};
+
+struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &hp_t5325_flash,
+		.irq		= -1,
+	},
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 45,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+	.buttons	= hp_t5325_buttons,
+	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &hp_t5325_button_data,
+	}
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_SPI_SCn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_SD_CLK,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP32_GPIO,
+	MPP33_GE1_TXCTL,
+	MPP39_AU_I2SBCLK,
+	MPP40_AU_I2SDO,
+	MPP41_AU_I2SLRCLK,
+	MPP42_AU_I2SMCLK,
+	MPP45_GPIO,		/* Power button */
+	MPP48_GPIO,		/* Board power off */
+	0
+};
+
+#define HP_T5325_GPIO_POWER_OFF		48
+
+static void hp_t5325_power_off(void)
+{
+	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+	kirkwood_uart0_init();
+	spi_register_board_info(hp_t5325_spi_slave_info,
+				ARRAY_SIZE(hp_t5325_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	kirkwood_ge00_init(&hp_t5325_ge00_data);
+	kirkwood_sata_init(&hp_t5325_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&hp_t5325_button_device);
+
+	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = hp_t5325_power_off;
+	else
+		pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+	if (machine_is_t5325())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= hp_t5325_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 2830f0f..a5bd7fd 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -74,8 +74,8 @@
 	MPP3_SPI_MISO,
 	MPP4_SATA1_ACTn,
 	MPP5_SATA0_ACTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
@@ -83,6 +83,7 @@
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
 	0
 };
 
@@ -110,10 +111,10 @@
 
 static int __init ts219_pci_init(void)
 {
-   if (machine_is_ts219())
-           kirkwood_pcie_init();
+	if (machine_is_ts219())
+		kirkwood_pcie_init(KW_PCIE0);
 
-   return 0;
+	return 0;
 }
 subsys_initcall(ts219_pci_init);
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index de49c2d..2e14afe 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -2,7 +2,7 @@
  *
  * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
  *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2009-2010  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <asm/mach-types.h>
@@ -26,6 +27,8 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+#define QNAP_TS41X_JUMPER_JP1	45
+
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
@@ -78,31 +81,31 @@
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_PEX_RST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_SATA0_ACTn,
 	MPP16_SATA1_ACTn,
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	MPP37_GPIO,		/* Reset button */
 	MPP43_GPIO,		/* USB Copy button */
 	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
-	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP45_GPIO,		/* JP1: 0: LCD, 1: serial console */
 	MPP46_GPIO,		/* External SATA HDD1 error indicator */
 	MPP47_GPIO,		/* External SATA HDD2 error indicator */
 	MPP48_GPIO,		/* External SATA HDD3 error indicator */
@@ -131,12 +134,14 @@
 
 	pm_power_off = qnap_tsx1x_power_off;
 
+	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
 }
 
 static int __init ts41x_pci_init(void)
 {
 	if (machine_is_ts41x())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
    return 0;
 }
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 7221c20..f781164e 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -77,7 +77,7 @@
 	},
 };
 
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
index 9a59296..7fa0373 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 7849966..5fcd082 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -268,8 +268,8 @@
 	__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
 
 	/* hook in fault handlers */
-	hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 }
 
 static void ks8695_show_pciregs(void)
diff --git a/arch/arm/mach-l7200/Makefile b/arch/arm/mach-l7200/Makefile
deleted file mode 100644
index 4bd8ebd..0000000
--- a/arch/arm/mach-l7200/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/arch/arm/mach-l7200/Makefile.boot b/arch/arm/mach-l7200/Makefile.boot
deleted file mode 100644
index 6c72ecb..0000000
--- a/arch/arm/mach-l7200/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0xf0008000
-
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
deleted file mode 100644
index 50d2324..0000000
--- a/arch/arm/mach-l7200/core.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/mm/mm-lusl7200.c
- *
- *  Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- *  Extra MM routines for L7200 architecture
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <asm/types.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-/*
- * IRQ base register
- */
-#define	IRQ_BASE	(IO_BASE_2 + 0x1000)
-
-/* 
- * Normal IRQ registers
- */
-#define IRQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x000))
-#define IRQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x004))
-#define IRQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x008))
-#define IRQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x00c))
-#define IRQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x010))
-#define IRQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x018))
-
-/* 
- * Fast IRQ registers
- */
-#define FIQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x100))
-#define FIQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x104))
-#define FIQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x108))
-#define FIQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x10c))
-#define FIQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x110))
-#define FIQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x118))
-
-static void l7200_mask_irq(unsigned int irq)
-{
-	IRQ_ENABLECLEAR = 1 << irq;
-}
-
-static void l7200_unmask_irq(unsigned int irq)
-{
-	IRQ_ENABLE = 1 << irq;
-}
-
-static struct irq_chip l7200_irq_chip = {
-	.ack		= l7200_mask_irq,
-	.mask		= l7200_mask_irq,
-	.unmask		= l7200_unmask_irq
-};
- 
-static void __init l7200_init_irq(void)
-{
-	int irq;
-
-	IRQ_ENABLECLEAR = 0xffffffff;	/* clear all interrupt enables */
-	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		set_irq_chip(irq, &l7200_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-		set_irq_handler(irq, handle_level_irq);
-	}
-
-	init_FIQ();
-}
-
-static struct map_desc l7200_io_desc[] __initdata = {
-	{ IO_BASE,	IO_START,	IO_SIZE,	MT_DEVICE },
-	{ IO_BASE_2,	IO_START_2,	IO_SIZE_2,	MT_DEVICE },
-	{ AUX_BASE,     AUX_START,      AUX_SIZE,       MT_DEVICE },
-	{ FLASH1_BASE,  FLASH1_START,   FLASH1_SIZE,    MT_DEVICE },
-	{ FLASH2_BASE,  FLASH2_START,   FLASH2_SIZE,    MT_DEVICE }
-};
-
-static void __init l7200_map_io(void)
-{
-	iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc));
-}
-
-MACHINE_START(L7200, "LinkUp Systems L7200")
-	/* Maintainer: Steve Hill / Scott McConnell */
-	.phys_io	= 0x80040000,
-	.io_pg_offst	= ((0xd0000000) >> 18) & 0xfffc,
-	.map_io		= l7200_map_io,
-	.init_irq	= l7200_init_irq,
-MACHINE_END
-
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
deleted file mode 100644
index 4671558..0000000
--- a/arch/arm/mach-l7200/include/mach/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <mach/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
deleted file mode 100644
index b69ed34..0000000
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-l7200/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
deleted file mode 100644
index 1726d91..0000000
--- a/arch/arm/mach-l7200/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
deleted file mode 100644
index 2b7086a..0000000
--- a/arch/arm/mach-l7200/include/mach/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <mach/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
deleted file mode 100644
index c7b0a5d..0000000
--- a/arch/arm/mach-l7200/include/mach/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      arch/arm/mach-l7200/include/mach/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
deleted file mode 100644
index c31909c..0000000
--- a/arch/arm/mach-l7200/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
deleted file mode 100644
index a770a89..0000000
--- a/arch/arm/mach-l7200/include/mach/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
deleted file mode 100644
index 7edffd7..0000000
--- a/arch/arm/mach-l7200/include/mach/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
deleted file mode 100644
index 9fb40ed..0000000
--- a/arch/arm/mach-l7200/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
deleted file mode 100644
index 3959871..0000000
--- a/arch/arm/mach-l7200/include/mach/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
deleted file mode 100644
index a2da7ae..0000000
--- a/arch/arm/mach-l7200/include/mach/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
deleted file mode 100644
index adc05e5..0000000
--- a/arch/arm/mach-l7200/include/mach/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
deleted file mode 100644
index 645f1c5..0000000
--- a/arch/arm/mach-l7200/include/mach/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <mach/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
deleted file mode 100644
index 9657287..0000000
--- a/arch/arm/mach-l7200/include/mach/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
deleted file mode 100644
index e9729a3..0000000
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
deleted file mode 100644
index e0dd3b6..0000000
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
deleted file mode 100644
index 061771c..0000000
--- a/arch/arm/mach-l7200/include/mach/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <mach/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
deleted file mode 100644
index ffc96a6..0000000
--- a/arch/arm/mach-l7200/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
deleted file mode 100644
index 591c962..0000000
--- a/arch/arm/mach-l7200/include/mach/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <mach/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
deleted file mode 100644
index 85f0abb..0000000
--- a/arch/arm/mach-l7200/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 189d20e..edb8f5f 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -19,50 +19,6 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
 /*
  * Sparsemem version of the above
  */
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 0000000..fde6635
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,33 @@
+if ARCH_LPC32XX
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_UART3_SELECT
+	bool "Add support for standard UART3"
+	help
+	 Adds support for standard UART 3 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART4_SELECT
+	bool "Add support for standard UART4"
+	help
+	 Adds support for standard UART 4 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART5_SELECT
+	bool "Add support for standard UART5"
+	default y
+	help
+	 Adds support for standard UART 5 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART6_SELECT
+	bool "Add support for standard UART6"
+	help
+	 Adds support for standard UART 6 when the 8250 serial support
+	 is enabled.
+
+endmenu
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 0000000..a5fc5d0
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y	:= timer.o irq.o common.o serial.o clock.o
+obj-y	+= gpiolib.o pm.o suspend.o
+obj-y	+= phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 0000000..b796b41
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x82000000
+
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 0000000..32d6379
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1137 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * LPC32xx clock management driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a caret are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ *                               32KHz oscillator*
+ *                               /      |      \
+ *                             RTC*   PLL397^ TOUCH
+ *                                     /
+ *               Main oscillator^     /
+ *                   |        \      /
+ *                   |         SYSCLK&
+ *                   |            \
+ *                   |             \
+ *                USB_PLL       HCLK_PLL&
+ *                   |           |    |
+ *            USB host/device  PCLK&  |
+ *                               |    |
+ *                             Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ *   clk_enable() and clk_disable() functions unless SYSCLK is based
+ *   on that clock. This allows the other oscillator that isn't driving
+ *   the HCLK PLL to be used as another system clock that can be routed
+ *   to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ *   this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ *   will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+static DEFINE_MUTEX(clkm_lock);
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+static const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+static unsigned long local_return_parent_rate(struct clk *clk)
+{
+	/*
+	 * If a clock has a rate of 0, then it inherits it's parent
+	 * clock rate
+	 */
+	while (clk->rate == 0)
+		clk = clk->parent;
+
+	return clk->rate;
+}
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+	.rate		= LPC32XX_CLOCK_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+	} else {
+		/* Enable PLL397 */
+		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+
+		/* Wait for PLL397 lock */
+		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+	} else {
+		/* Enable main oscillator */
+		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+		/* Wait for main oscillator to start */
+		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct clk osc_pll397 = {
+	.parent		= &osc_32KHz,
+	.enable		= local_pll397_enable,
+	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk osc_main = {
+	.enable		= local_oscmain_enable,
+	.rate		= LPC32XX_MAIN_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Convert a PLL register value to a PLL output frequency
+ */
+u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
+{
+	struct clk_pll_setup pllcfg;
+
+	pllcfg.cco_bypass_b15 = 0;
+	pllcfg.direct_output_b14 = 0;
+	pllcfg.fdbk_div_ctrl_b13 = 0;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
+		pllcfg.cco_bypass_b15 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
+		pllcfg.direct_output_b14 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
+		pllcfg.fdbk_div_ctrl_b13 = 1;
+	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
+	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
+	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
+
+	return clk_check_pll_setup(inputclk, &pllcfg);
+}
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+	u32 tv, tmp = 0;
+
+	if (PllSetup->analog_on != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
+	if (PllSetup->cco_bypass_b15 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
+	if (PllSetup->direct_output_b14 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+	if (PllSetup->fdbk_div_ctrl_b13 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+	tv = ffs(PllSetup->pll_p) - 1;
+	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
+		return 0;
+
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+	return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+	u32 clkin, pllreg;
+
+	clkin = clk_armpll.parent->rate;
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+
+	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+	struct clk_pll_setup *pllsetup)
+{
+	u32 ifreq, freqtol, m, n, p, fclkout;
+
+	/* Determine frequency tolerance limits */
+	freqtol = target_freq / 250;
+	ifreq = pllin_freq;
+
+	/* Is direct bypass mode possible? */
+	if (abs(pllin_freq - target_freq) <= freqtol) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 1;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_p = pll_postdivs[0];
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		return clk_check_pll_setup(ifreq, pllsetup);
+	} else if (target_freq <= ifreq) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 0;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		for (p = 0; p <= 3; p++) {
+			pllsetup->pll_p = pll_postdivs[p];
+			fclkout = clk_check_pll_setup(ifreq, pllsetup);
+			if (abs(target_freq - fclkout) <= freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is direct mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 1;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	pllsetup->pll_p = pll_postdivs[0];
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			/* Compute output frequency for this value */
+			pllsetup->pll_n = n;
+			pllsetup->pll_m = m;
+			fclkout = clk_check_pll_setup(ifreq,
+				pllsetup);
+			if (abs(target_freq - fclkout) <=
+				freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is integer mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 1;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	/* Try non-integer mode */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct clk clk_armpll = {
+	.parent		= &clk_sys,
+	.get_rate	= local_return_parent_rate,
+};
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
+	reg |= tmp;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return clk_check_pll_setup(clk_usbpll.parent->rate,
+		pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	int ret = -ENODEV;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable == 0) {
+		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/* Wait for PLL lock */
+		while ((timeout > jiffies) & (ret == -ENODEV)) {
+			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
+				ret = 0;
+		}
+
+		if (ret == 0) {
+			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+		}
+	}
+
+	return ret;
+}
+
+static unsigned long local_usbpll_round_rate(struct clk *clk,
+	unsigned long rate)
+{
+	u32 clkin, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->parent->rate;
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return 0;
+
+	return clk_check_pll_setup(clkin, &pllsetup);
+}
+
+static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 clkin, reg, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->get_rate(clk);
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return -EINVAL;
+
+	local_usbpll_enable(clk, 0);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	pllsetup.analog_on = 1;
+	local_clk_usbpll_setup(&pllsetup);
+
+	clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_usbpll = {
+	.parent		= &osc_main,
+	.set_rate	= local_usbpll_set_rate,
+	.enable		= local_usbpll_enable,
+	.rate		= 48000, /* In KHz */
+	.get_rate	= local_return_parent_rate,
+	.round_rate	= local_usbpll_round_rate,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+	static const u32 hclkdivs[4] = {1, 2, 4, 4};
+	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
+		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
+}
+
+static struct clk clk_hclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_pclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(clk->enable_reg);
+
+	if (enable == 0)
+		tmp &= ~clk->enable_mask;
+	else
+		tmp |= clk->enable_mask;
+
+	__raw_writel(tmp, clk->enable_reg);
+
+	return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer1 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_wdt = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_vfp9 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_dma = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart4 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart5 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart6 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
+	.enable_mask	= 0x4,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_kscan = {
+	.parent		= &osc_32KHz,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_nand = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_net = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
+	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_rtc = {
+	.parent		= &osc_32KHz,
+	.rate		= 1, /* 1 Hz */
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_usbd = {
+	.parent		= &clk_usbpll,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	/* Make sure 32KHz clock is the selected clock */
+	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+	if (enable == 0)
+		__raw_writel(0, clk->enable_reg);
+	else
+		__raw_writel(clk->enable_mask, clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk clk_tsc = {
+	.parent		= &osc_32KHz,
+	.enable		= tsc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	/* If rate is 0, disable clock */
+	if (enable != 0)
+		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static unsigned long mmc_get_rate(struct clk *clk)
+{
+	u32 div, rate, oldclk;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	/* Get the parent clock rate */
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Get the MMC controller clock divider value */
+	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+
+	if (!div)
+		div = 1;
+
+	return rate / div;
+}
+
+static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, prate;
+
+	/* Get the parent clock rate */
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		return prate;
+
+	div = prate / rate;
+	if (div > 0xf)
+		div = 0xf;
+
+	return prate / div;
+}
+
+static int mmc_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 oldclk, tmp;
+	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	div = prate / crate;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_mmc = {
+	.parent		= &clk_armpll,
+	.set_rate	= mmc_set_rate,
+	.get_rate	= mmc_get_rate,
+	.round_rate	= mmc_round_rate,
+	.enable		= mmc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static unsigned long clcd_get_rate(struct clk *clk)
+{
+	u32 tmp, div, rate, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Only supports internal clocking */
+	if (tmp & TIM2_BCD)
+		return rate;
+
+	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+	tmp = rate / (2 + div);
+
+	return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 tmp, prate, div, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate < prate) {
+		/* Find closest divider */
+		div = prate / rate;
+		if (div >= 2) {
+			div -= 2;
+			tmp &= ~TIM2_BCD;
+		}
+
+		tmp &= ~(0xF800001F);
+		tmp |= (div & 0x1F);
+		tmp |= (((div >> 5) & 0x1F) << 27);
+	}
+
+	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	return 0;
+}
+
+static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 prate, div;
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		rate = prate;
+	else {
+		div = prate / rate;
+		if (div > 0x3ff)
+			div = 0x3ff;
+
+		rate = prate / div;
+	}
+
+	return rate;
+}
+
+static struct clk clk_lcd = {
+	.parent		= &clk_hclk,
+	.set_rate	= clcd_set_rate,
+	.get_rate	= clcd_get_rate,
+	.round_rate	= clcd_round_rate,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+	mutex_lock(&clkm_lock);
+}
+
+static inline void clk_unlock(void)
+{
+	mutex_unlock(&clkm_lock);
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+	WARN_ON(clk->usecount == 0);
+
+	/* Don't attempt to disable clock if it has no users */
+	if (clk->usecount > 0) {
+		clk->usecount--;
+
+		/* Only disable clock when it has no more users */
+		if ((clk->usecount == 0) && (clk->enable))
+			clk->enable(clk, 0);
+
+		/* Check parent clocks, they may need to be disabled too */
+		if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	/* Enable parent clocks first and update use counts */
+	if (clk->parent)
+		ret = local_clk_enable(clk->parent);
+
+	if (!ret) {
+		/* Only enable clock if it's currently disabled */
+		if ((clk->usecount == 0) && (clk->enable))
+			ret = clk->enable(clk, 1);
+
+		if (!ret)
+			clk->usecount++;
+		else if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+
+	return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret;
+
+	clk_lock();
+	ret = local_clk_enable(clk);
+	clk_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+	clk_lock();
+	local_clk_disable(clk);
+	clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	clk_lock();
+	rate = clk->get_rate(clk);
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	/*
+	 * Most system clocks can only be enabled or disabled, with
+	 * the actual rate set as part of the peripheral dividers
+	 * instead of high level clock control
+	 */
+	if (clk->set_rate) {
+		clk_lock();
+		ret = clk->set_rate(clk, rate);
+		clk_unlock();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	clk_lock();
+
+	if (clk->round_rate)
+		rate = clk->round_rate(clk, rate);
+	else
+		rate = clk->get_rate(clk);
+
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	/* Clock re-parenting is not supported */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = (d), \
+		.con_id = (n), \
+		.clk = &(c), \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
+	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+	_REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/*
+	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
+	 * parent clock used for the ARM PLL and is used to derive
+	 * the many system clock rates in the device.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clk_sys.parent = &osc_main;
+	else
+		clk_sys.parent = &osc_pll397;
+
+	clk_sys.rate = clk_sys.parent->rate;
+
+	/* Compute the current ARM PLL and USB PLL frequencies */
+	local_update_armpll_rate();
+
+	/* Compute HCLK and PCLK bus rates */
+	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+	/*
+	 * Enable system clocks - this step is somewhat formal, as the
+	 * clocks are already running, but it does get the clock data
+	 * inline with the actual system state. Never disable these
+	 * clocks as they will only stop if the system is going to sleep.
+	 * In that case, the chip/system power management functions will
+	 * handle clock gating.
+	 */
+	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
+		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
+
+	/*
+	 * Timers 0 and 1 were enabled and are being used by the high
+	 * resolution tick function prior to this driver being initialized.
+	 * Tag them now as used.
+	 */
+	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
+		printk(KERN_ERR "Error enabling timer tick clocks\n");
+
+	return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 0000000..c0a8434
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+	struct list_head node;
+	struct clk *parent;
+	u32 rate;
+	u32 usecount;
+
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *clk);
+	int (*enable) (struct clk *, int);
+
+	/* Register address and bit mask for simple clocks */
+	void __iomem *enable_reg;
+	u32 enable_mask;
+};
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
new file mode 100644
index 0000000..ee24dc2
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -0,0 +1,271 @@
+/*
+ * arch/arm/mach-lpc32xx/common.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/i2c.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Watchdog timer
+ */
+static struct resource watchdog_resources[] = {
+	[0] = {
+		.start = LPC32XX_WDTIM_BASE,
+		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device lpc32xx_watchdog_device = {
+	.name = "pnx4008-watchdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(watchdog_resources),
+	.resource = watchdog_resources,
+};
+
+/*
+ * I2C busses
+ */
+static struct i2c_pnx_data i2c0_data = {
+	.name = I2C_CHIP_NAME "1",
+	.base = LPC32XX_I2C1_BASE,
+	.irq = IRQ_LPC32XX_I2C_1,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+	.name = I2C_CHIP_NAME "2",
+	.base = LPC32XX_I2C2_BASE,
+	.irq = IRQ_LPC32XX_I2C_2,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+	.name = "USB-I2C",
+	.base = LPC32XX_OTG_I2C_BASE,
+	.irq = IRQ_LPC32XX_USB_I2C,
+};
+
+struct platform_device lpc32xx_i2c0_device = {
+	.name = "pnx-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &i2c0_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c1_device = {
+	.name = "pnx-i2c",
+	.id = 1,
+	.dev = {
+		.platform_data = &i2c1_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c2_device = {
+	.name = "pnx-i2c",
+	.id = 2,
+	.dev = {
+		.platform_data = &i2c2_data,
+	},
+};
+
+/*
+ * Returns the unique ID for the device
+ */
+void lpc32xx_get_uid(u32 devid[4])
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
+}
+
+/*
+ * Returns SYSCLK source
+ * 0 = PLL397, 1 = main oscillator
+ */
+int clk_is_sysclk_mainosc(void)
+{
+	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
+		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * System reset via the watchdog timer
+ */
+void lpc32xx_watchdog_reset(void)
+{
+	/* Make sure WDT clocks are enabled */
+	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
+
+	/* Instant assert of RESETOUT_N with pulse length 1mS */
+	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
+	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
+}
+
+/*
+ * Detects and returns IRAM size for the device variation
+ */
+#define LPC32XX_IRAM_BANK_SIZE SZ_128K
+static u32 iram_size;
+u32 lpc32xx_return_iram_size(void)
+{
+	if (iram_size == 0) {
+		u32 savedval1, savedval2;
+		void __iomem *iramptr1, *iramptr2;
+
+		iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
+		iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
+		savedval1 = __raw_readl(iramptr1);
+		savedval2 = __raw_readl(iramptr2);
+
+		if (savedval1 == savedval2) {
+			__raw_writel(savedval2 + 1, iramptr2);
+			if (__raw_readl(iramptr1) == savedval2 + 1)
+				iram_size = LPC32XX_IRAM_BANK_SIZE;
+			else
+				iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+			__raw_writel(savedval2, iramptr2);
+		} else
+			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+	}
+
+	return iram_size;
+}
+
+/*
+ * Computes PLL rate from PLL register and input clock
+ */
+u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
+{
+	u32 ilfreq, p, m, n, fcco, fref, cfreq;
+	int mode;
+
+	/*
+	 * PLL requirements
+	 * ifreq must be >= 1MHz and <= 20MHz
+	 * FCCO must be >= 156MHz and <= 320MHz
+	 * FREF must be >= 1MHz and <= 27MHz
+	 * Assume the passed input data is not valid
+	 */
+
+	ilfreq = ifreq;
+	m = pllsetup->pll_m;
+	n = pllsetup->pll_n;
+	p = pllsetup->pll_p;
+
+	mode = (pllsetup->cco_bypass_b15 << 2) |
+		(pllsetup->direct_output_b14 << 1) |
+	pllsetup->fdbk_div_ctrl_b13;
+
+	switch (mode) {
+	case 0x0: /* Non-integer mode */
+		cfreq = (m * ilfreq) / (2 * p * n);
+		fcco = (m * ilfreq) / n;
+		fref = ilfreq / n;
+		break;
+
+	case 0x1: /* integer mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = (m * ilfreq) / (n * 2 * p);
+		fref = ilfreq / n;
+		break;
+
+	case 0x2:
+	case 0x3: /* Direct mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = cfreq;
+		fref = ilfreq / n;
+		break;
+
+	case 0x4:
+	case 0x5: /* Bypass mode */
+		cfreq = ilfreq / (2 * p);
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+
+	case 0x6:
+	case 0x7: /* Direct bypass mode */
+	default:
+		cfreq = ilfreq;
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+	}
+
+	if (fcco < 156000000 || fcco > 320000000)
+		cfreq = 0;
+
+	if (fref < 1000000 || fref > 27000000)
+		cfreq = 0;
+
+	return (u32) cfreq;
+}
+
+u32 clk_get_pclk_div(void)
+{
+	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
+}
+
+static struct map_desc lpc32xx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
+		.length		= LPC32XX_AHB0_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
+		.length		= LPC32XX_AHB1_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
+		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
+		.length		= LPC32XX_FABAPB_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
+		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
+		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
+		.type		= MT_DEVICE
+	},
+};
+
+void __init lpc32xx_map_io(void)
+{
+	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
new file mode 100644
index 0000000..f82211f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-lpc32xx/common.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009-2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_COMMON_H
+#define __LPC32XX_COMMON_H
+
+#include <linux/platform_device.h>
+
+/*
+ * Arch specific platform device structures
+ */
+extern struct platform_device lpc32xx_watchdog_device;
+extern struct platform_device lpc32xx_i2c0_device;
+extern struct platform_device lpc32xx_i2c1_device;
+extern struct platform_device lpc32xx_i2c2_device;
+
+/*
+ * Other arch specific structures and functions
+ */
+extern struct sys_timer lpc32xx_timer;
+extern void __init lpc32xx_init_irq(void);
+extern void __init lpc32xx_map_io(void);
+extern void __init lpc32xx_serial_init(void);
+extern void __init lpc32xx_gpio_init(void);
+
+/*
+ * Structure used for setting up and querying the PLLS
+ */
+struct clk_pll_setup {
+	int analog_on;
+	int cco_bypass_b15;
+	int direct_output_b14;
+	int fdbk_div_ctrl_b13;
+	int pll_p;
+	int pll_n;
+	u32 pll_m;
+};
+
+extern int clk_is_sysclk_mainosc(void);
+extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
+extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
+extern u32 clk_get_pclk_div(void);
+
+/*
+ * Returns the LPC32xx unique 128-bit chip ID
+ */
+extern void lpc32xx_get_uid(u32 devid[4]);
+
+extern void lpc32xx_watchdog_reset(void);
+extern u32 lpc32xx_return_iram_size(void);
+
+/*
+ * Pointers used for sizing and copying suspend function data
+ */
+extern int lpc32xx_sys_suspend(void);
+extern int lpc32xx_sys_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c
new file mode 100644
index 0000000..69061ea
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/gpiolib.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+struct gpio_regs {
+	void __iomem *inp_state;
+	void __iomem *outp_set;
+	void __iomem *outp_clr;
+	void __iomem *dir_set;
+	void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpi000", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+	struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		__raw_writel(u, group->gpio_grp->dir_clr);
+	else
+		__raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		__raw_writel(u, group->gpio_grp->outp_set);
+	else
+		__raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = __raw_readl(group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
new file mode 100644
index 0000000..9bf0637e
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..621744d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Debug output is hardcoded to standard UART 5
+*/
+
+	.macro	addruart,rx, tmp
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1				@ MMU enabled?
+	ldreq	\rx, =0x40090000
+	ldrne	\rx, =0xF4090000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..870227c
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+/*
+ * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
+ * as set if an interrupt is pending.
+ */
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
+	clz	\irqnr, \irqstat
+	rsb	\irqnr, \irqnr, #31
+	teq	\irqstat, #0
+	.endm
+
+	.macro	irq_prio_table
+	.endm
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 0000000..67d03da
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 0000000..33e1dde
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 0000000..034dc92
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h b/arch/arm/mach-lpc32xx/include/mach/io.h
new file mode 100644
index 0000000..9b59ab5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 0000000..2667f52
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
+#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_LPC32XX_SUB1IRQ		0
+#define IRQ_LPC32XX_SUB2IRQ		1
+#define IRQ_LPC32XX_PWM3		3
+#define IRQ_LPC32XX_PWM4		4
+#define IRQ_LPC32XX_HSTIMER		5
+#define IRQ_LPC32XX_WATCH		6
+#define IRQ_LPC32XX_UART_IIR3		7
+#define IRQ_LPC32XX_UART_IIR4		8
+#define IRQ_LPC32XX_UART_IIR5		9
+#define IRQ_LPC32XX_UART_IIR6		10
+#define IRQ_LPC32XX_FLASH		11
+#define IRQ_LPC32XX_SD1			13
+#define IRQ_LPC32XX_LCD			14
+#define IRQ_LPC32XX_SD0			15
+#define IRQ_LPC32XX_TIMER0		16
+#define IRQ_LPC32XX_TIMER1		17
+#define IRQ_LPC32XX_TIMER2		18
+#define IRQ_LPC32XX_TIMER3		19
+#define IRQ_LPC32XX_SSP0		20
+#define IRQ_LPC32XX_SSP1		21
+#define IRQ_LPC32XX_I2S0		22
+#define IRQ_LPC32XX_I2S1		23
+#define IRQ_LPC32XX_UART_IIR7		24
+#define IRQ_LPC32XX_UART_IIR2		25
+#define IRQ_LPC32XX_UART_IIR1		26
+#define IRQ_LPC32XX_MSTIMER		27
+#define IRQ_LPC32XX_DMA			28
+#define IRQ_LPC32XX_ETHERNET		29
+#define IRQ_LPC32XX_SUB1FIQ		30
+#define IRQ_LPC32XX_SUB2FIQ		31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
+#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
+#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
+#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
+#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
+#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
+#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
+#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
+#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
+#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
+#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
+#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
+#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
+#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
+#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
+#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
+#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
+#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
+#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
+#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
+#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
+#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
+#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
+#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
+#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
+#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
+#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
+#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
+#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
+#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
+#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
+#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
+#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
+#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
+#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
+#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
+#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
+#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
+#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
+#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
+#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
+#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
+#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
+#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
+#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
+#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
+
+#define NR_IRQS				96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 0000000..044e1ac
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET	UL(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 0000000..14ea8d1
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,694 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v)				((v) << (f))
+#define _BIT(n)					_SBF(n, 1)
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define LPC32XX_SLC_BASE			0x20020000
+#define LPC32XX_SSP0_BASE			0x20084000
+#define LPC32XX_SPI1_BASE			0x20088000
+#define LPC32XX_SSP1_BASE			0x2008C000
+#define LPC32XX_SPI2_BASE			0x20090000
+#define LPC32XX_I2S0_BASE			0x20094000
+#define LPC32XX_SD_BASE				0x20098000
+#define LPC32XX_I2S1_BASE			0x2009C000
+#define LPC32XX_MLC_BASE			0x200A8000
+#define LPC32XX_AHB0_START			LPC32XX_SLC_BASE
+#define LPC32XX_AHB0_SIZE			0x00089000
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define LPC32XX_DMA_BASE			0x31000000
+#define LPC32XX_USB_BASE			0x31020000
+#define LPC32XX_USBH_BASE			0x31020000
+#define LPC32XX_USB_OTG_BASE			0x31020000
+#define LPC32XX_OTG_I2C_BASE			0x31020300
+#define LPC32XX_LCD_BASE			0x31040000
+#define LPC32XX_ETHERNET_BASE			0x31060000
+#define LPC32XX_EMC_BASE			0x31080000
+#define LPC32XX_ETB_CFG_BASE			0x310C0000
+#define LPC32XX_ETB_DATA_BASE			0x310E0000
+#define LPC32XX_AHB1_START			LPC32XX_DMA_BASE
+#define LPC32XX_AHB1_SIZE			0x000E1000
+
+/*
+ * FAB physical base addresses
+ */
+#define LPC32XX_CLK_PM_BASE			0x40004000
+#define LPC32XX_MIC_BASE			0x40008000
+#define LPC32XX_SIC1_BASE			0x4000C000
+#define LPC32XX_SIC2_BASE			0x40010000
+#define LPC32XX_HS_UART1_BASE			0x40014000
+#define LPC32XX_HS_UART2_BASE			0x40018000
+#define LPC32XX_HS_UART7_BASE			0x4001C000
+#define LPC32XX_RTC_BASE			0x40024000
+#define LPC32XX_RTC_RAM_BASE			0x40024080
+#define LPC32XX_GPIO_BASE			0x40028000
+#define LPC32XX_PWM3_BASE			0x4002C000
+#define LPC32XX_PWM4_BASE			0x40030000
+#define LPC32XX_MSTIM_BASE			0x40034000
+#define LPC32XX_HSTIM_BASE			0x40038000
+#define LPC32XX_WDTIM_BASE			0x4003C000
+#define LPC32XX_DEBUG_CTRL_BASE			0x40040000
+#define LPC32XX_TIMER0_BASE			0x40044000
+#define LPC32XX_ADC_BASE			0x40048000
+#define LPC32XX_TIMER1_BASE			0x4004C000
+#define LPC32XX_KSCAN_BASE			0x40050000
+#define LPC32XX_UART_CTRL_BASE			0x40054000
+#define LPC32XX_TIMER2_BASE			0x40058000
+#define LPC32XX_PWM1_BASE			0x4005C000
+#define LPC32XX_PWM2_BASE			0x4005C004
+#define LPC32XX_TIMER3_BASE			0x40060000
+
+/*
+ * APB physical base addresses
+ */
+#define LPC32XX_UART3_BASE			0x40080000
+#define LPC32XX_UART4_BASE			0x40088000
+#define LPC32XX_UART5_BASE			0x40090000
+#define LPC32XX_UART6_BASE			0x40098000
+#define LPC32XX_I2C1_BASE			0x400A0000
+#define LPC32XX_I2C2_BASE			0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define LPC32XX_FABAPB_START			LPC32XX_CLK_PM_BASE
+#define LPC32XX_FABAPB_SIZE			0x000A5000
+
+/*
+ * Internal memory bases and sizes
+ */
+#define LPC32XX_IRAM_BASE			0x08000000
+#define LPC32XX_IROM_BASE			0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_CS0_BASE			0xE0000000
+#define LPC32XX_EMC_CS1_BASE			0xE1000000
+#define LPC32XX_EMC_CS2_BASE			0xE2000000
+#define LPC32XX_EMC_CS3_BASE			0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_DYCS0_BASE			0x80000000
+#define LPC32XX_EMC_DYCS1_BASE			0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+#define LPC32XX_CLOCK_OSC_FREQ			32768
+
+/*
+ * Clock and Power control register offsets
+ */
+#define _PMREG(x)				io_p2v(LPC32XX_CLK_PM_BASE +\
+						(x))
+#define LPC32XX_CLKPWR_DEBUG_CTRL		_PMREG(0x000)
+#define LPC32XX_CLKPWR_BOOTMAP			_PMREG(0x014)
+#define LPC32XX_CLKPWR_P01_ER			_PMREG(0x018)
+#define LPC32XX_CLKPWR_USBCLK_PDIV		_PMREG(0x01C)
+#define LPC32XX_CLKPWR_INT_ER			_PMREG(0x020)
+#define LPC32XX_CLKPWR_INT_RS			_PMREG(0x024)
+#define LPC32XX_CLKPWR_INT_SR			_PMREG(0x028)
+#define LPC32XX_CLKPWR_INT_AP			_PMREG(0x02C)
+#define LPC32XX_CLKPWR_PIN_ER			_PMREG(0x030)
+#define LPC32XX_CLKPWR_PIN_RS			_PMREG(0x034)
+#define LPC32XX_CLKPWR_PIN_SR			_PMREG(0x038)
+#define LPC32XX_CLKPWR_PIN_AP			_PMREG(0x03C)
+#define LPC32XX_CLKPWR_HCLK_DIV			_PMREG(0x040)
+#define LPC32XX_CLKPWR_PWR_CTRL			_PMREG(0x044)
+#define LPC32XX_CLKPWR_PLL397_CTRL		_PMREG(0x048)
+#define LPC32XX_CLKPWR_MAIN_OSC_CTRL		_PMREG(0x04C)
+#define LPC32XX_CLKPWR_SYSCLK_CTRL		_PMREG(0x050)
+#define LPC32XX_CLKPWR_LCDCLK_CTRL		_PMREG(0x054)
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL		_PMREG(0x058)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1		_PMREG(0x060)
+#define LPC32XX_CLKPWR_USB_CTRL			_PMREG(0x064)
+#define LPC32XX_CLKPWR_SDRAMCLK_CTRL		_PMREG(0x068)
+#define LPC32XX_CLKPWR_DDR_LAP_NOM		_PMREG(0x06C)
+#define LPC32XX_CLKPWR_DDR_LAP_COUNT		_PMREG(0x070)
+#define LPC32XX_CLKPWR_DDR_LAP_DELAY		_PMREG(0x074)
+#define LPC32XX_CLKPWR_SSP_CLK_CTRL		_PMREG(0x078)
+#define LPC32XX_CLKPWR_I2S_CLK_CTRL		_PMREG(0x07C)
+#define LPC32XX_CLKPWR_MS_CTRL			_PMREG(0x080)
+#define LPC32XX_CLKPWR_MACCLK_CTRL		_PMREG(0x090)
+#define LPC32XX_CLKPWR_TEST_CLK_SEL		_PMREG(0x0A4)
+#define LPC32XX_CLKPWR_SFW_INT			_PMREG(0x0A8)
+#define LPC32XX_CLKPWR_I2C_CLK_CTRL		_PMREG(0x0AC)
+#define LPC32XX_CLKPWR_KEY_CLK_CTRL		_PMREG(0x0B0)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL		_PMREG(0x0B4)
+#define LPC32XX_CLKPWR_PWM_CLK_CTRL		_PMREG(0x0B8)
+#define LPC32XX_CLKPWR_TIMER_CLK_CTRL		_PMREG(0x0BC)
+#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1	_PMREG(0x0C0)
+#define LPC32XX_CLKPWR_SPI_CLK_CTRL		_PMREG(0x0C4)
+#define LPC32XX_CLKPWR_NAND_CLK_CTRL		_PMREG(0x0C8)
+#define LPC32XX_CLKPWR_UART3_CLK_CTRL		_PMREG(0x0D0)
+#define LPC32XX_CLKPWR_UART4_CLK_CTRL		_PMREG(0x0D4)
+#define LPC32XX_CLKPWR_UART5_CLK_CTRL		_PMREG(0x0D8)
+#define LPC32XX_CLKPWR_UART6_CLK_CTRL		_PMREG(0x0DC)
+#define LPC32XX_CLKPWR_IRDA_CLK_CTRL		_PMREG(0x0E0)
+#define LPC32XX_CLKPWR_UART_CLK_CTRL		_PMREG(0x0E4)
+#define LPC32XX_CLKPWR_DMA_CLK_CTRL		_PMREG(0x0E8)
+#define LPC32XX_CLKPWR_AUTOCLOCK		_PMREG(0x0EC)
+#define LPC32XX_CLKPWR_DEVID(x)			_PMREG(0x130 + (x))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT	_BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT		_BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT	_BIT(31)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT	_BIT(27)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT	_BIT(24)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT	_BIT(22)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT	_BIT(21)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT	_BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK		0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define LPC32XX_CLKPWR_INTSRC_ADC_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT		_BIT(30)
+#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_INTSRC_RTC_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_INTSRC_USB_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_INTSRC_I2C_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_INTSRC_KEY_BIT		_BIT(16)
+#define LPC32XX_CLKPWR_INTSRC_MAC_BIT		_BIT(7)
+#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT		_BIT(6)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT	_BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT		_BIT(26)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT	_BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP	(0x0 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM	(0x1 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF	(0x2 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n)	((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK		_BIT(10)
+#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH		_BIT(9)
+#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH	_BIT(8)
+#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH	_BIT(7)
+#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN		_BIT(3)
+#define LPC32XX_CLKPWR_SELECT_RUN_MODE		_BIT(2)
+#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN		_BIT(1)
+#define LPC32XX_CLKPWR_STOP_MODE_CTRL		_BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS	_BIT(10)
+#define LPC32XX_CLKPWR_PLL397_BYPASS		_BIT(9)
+#define LPC32XX_CLKPWR_PLL397_BIAS_NORM		0x000
+#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5	0x040
+#define LPC32XX_CLKPWR_PLL397_BIAS_N25		0x080
+#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5	0x0C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5	0x100
+#define LPC32XX_CLKPWR_PLL397_BIAS_P25		0x140
+#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5	0x180
+#define LPC32XX_CLKPWR_PLL397_BIAS_P50		0x1C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_MASK		0x1C0
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS	_BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n)		(((n) & 0x7F) << 2)
+#define LPC32XX_CLKPWR_MOSC_CAP_MASK		(0x7F << 2)
+#define LPC32XX_CLKPWR_TEST_MODE		_BIT(1)
+#define LPC32XX_CLKPWR_MOSC_DISABLE		_BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n)	(((n) & 0x3FF) << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK		(0x3FF << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX	_BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12	0x000
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16	0x040
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15	0x080
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24	0x0C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M	0x100
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C	0x140
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M	0x180
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C	0x1C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK	0x01C0
+#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN		0x020
+#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n)	((n - 1) & 0x1F)
+#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK	0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP		_BIT(16)
+#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n)		(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n)	(((n) & 0xFF) << 0)
+#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL	_BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN		_BIT(24)
+#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN	_BIT(23)
+#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN	_BIT(22)
+#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN	_BIT(21)
+#define LPC32XX_CLKPWR_USBCTRL_PU_ADD		(0x0 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER	(0x1 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_PD_ADD		(0x3 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2		_BIT(18)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1		_BIT(17)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP	_BIT(16)
+#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n)	(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK	_BIT(22)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW		_BIT(21)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT	_BIT(20)
+#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET	_BIT(19)
+#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n)	(((n) & 0x1F) << 14)
+#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS	_BIT(13)
+#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n)	(((n) & 0x7) << 10)
+#define LPC32XX_CLKPWR_SDRCLK_USE_CAL		_BIT(9)
+#define LPC32XX_CLKPWR_SDRCLK_DO_CAL		_BIT(8)
+#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC	_BIT(7)
+#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_SDRCLK_USE_DDR		_BIT(1)
+#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS		_BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX	_BIT(5)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX	_BIT(4)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX	_BIT(3)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX	_BIT(2)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX	_BIT(6)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX	_BIT(5)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA	_BIT(4)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX	_BIT(3)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX	_BIT(2)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS	_BIT(10)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN	_BIT(9)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS	_BIT(8)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS	_BIT(7)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS	_BIT(6)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN		_BIT(5)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n)	((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS	0x00
+#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS	0x08
+#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS	0x18
+#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK		0x18
+#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN	_BIT(2)
+#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN	_BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK	(0x0 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC		(0x1 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC	(0x2 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK	(0x3 << 5)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN	_BIT(4)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK	(0x0 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK	(0x1 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK	(0x2 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC	(0x5 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN	_BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define LPC32XX_CLKPWR_SW_INT(n)		(_BIT(0) | (((n) & 0x7F) << 1))
+#define LPC32XX_CLKPWR_SW_GET_ARG(n)		(((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE	_BIT(4)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE	_BIT(3)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE	_BIT(2)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN	_BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n)	(((n) & 0xF) << 8)
+#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n)	(((n) & 0xF) << 4)
+#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK	0x8
+#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN	0x4
+#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK	0x2
+#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN	0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN	0x2
+#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN		0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN	0x20
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN	0x10
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN	0x08
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN	0x04
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN	0x02
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN	0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO	0x80
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK	0x40
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI2		0x20
+#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN	0x10
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO	0x08
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK	0x04
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI1		0x02
+#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN	0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC	0x20
+#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB		0x10
+#define LPC32XX_CLKPWR_NANDCLK_DMA_INT		0x08
+#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC		0x04
+#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN	0x02
+#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN	0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UART_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_UART_X_DIV(x)		(((x) & 0xFF) << 8)
+#define LPC32XX_CLKPWR_UART_USE_HCLK		_BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_IRDA_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_IRDA_X_DIV(x)		(((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN	_BIT(3)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN	_BIT(2)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN	_BIT(1)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN	_BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define LPC32XX_CLKPWR_AUTOCLK_USB_EN		0x40
+#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN		0x02
+#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN		0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define LPC32XX_INTC_MASK(x)			io_p2v((x) + 0x00)
+#define LPC32XX_INTC_RAW_STAT(x)		io_p2v((x) + 0x04)
+#define LPC32XX_INTC_STAT(x)			io_p2v((x) + 0x08)
+#define LPC32XX_INTC_POLAR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_INTC_ACT_TYPE(x)		io_p2v((x) + 0x10)
+#define LPC32XX_INTC_TYPE(x)			io_p2v((x) + 0x14)
+
+/*
+ * Timer/counter register offsets
+ */
+#define LCP32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
+#define LCP32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
+#define LCP32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
+#define LCP32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
+#define LCP32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
+#define LCP32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
+#define LCP32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
+#define LCP32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
+#define LCP32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
+#define LCP32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
+#define LCP32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
+#define LCP32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
+#define LCP32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
+#define LCP32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
+#define LCP32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
+#define LCP32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
+#define LCP32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
+#define LCP32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_TCR_EN		0x1
+#define LCP32XX_TIMER_CNTR_TCR_RESET		0x2
+
+/*
+ * mcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
+#define LCP32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
+#define LCP32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
+
+/*
+ * Standard UART register offsets
+ */
+#define LPC32XX_UART_DLL_FIFO(x)		io_p2v((x) + 0x00)
+#define LPC32XX_UART_DLM_IER(x)			io_p2v((x) + 0x04)
+#define LPC32XX_UART_IIR_FCR(x)			io_p2v((x) + 0x08)
+#define LPC32XX_UART_LCR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_UART_MODEM_CTRL(x)		io_p2v((x) + 0x10)
+#define LPC32XX_UART_LSR(x)			io_p2v((x) + 0x14)
+#define LPC32XX_UART_MODEM_STATUS(x)		io_p2v((x) + 0x18)
+#define LPC32XX_UART_RXLEV(x)			io_p2v((x) + 0x1C)
+
+/*
+ * UART control structure offsets
+ */
+#define _UCREG(x)				io_p2v(\
+						LPC32XX_UART_CTRL_BASE + (x))
+#define LPC32XX_UARTCTL_CTRL			_UCREG(0x00)
+#define LPC32XX_UARTCTL_CLKMODE			_UCREG(0x04)
+#define LPC32XX_UARTCTL_CLOOP			_UCREG(0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define LPC32XX_UART_U3_MD_CTRL_EN		_BIT(11)
+#define LPC32XX_UART_IRRX6_INV_EN		_BIT(10)
+#define LPC32XX_UART_HDPX_EN			_BIT(9)
+#define LPC32XX_UART_UART6_IRDAMOD_BYPASS	_BIT(5)
+#define LPC32XX_RT_IRTX6_INV_EN			_BIT(4)
+#define LPC32XX_RT_IRTX6_INV_MIR_EN		_BIT(3)
+#define LPC32XX_RT_RX_IRPULSE_3_16_115K		_BIT(2)
+#define LPC32XX_RT_TX_IRPULSE_3_16_115K		_BIT(1)
+#define LPC32XX_UART_U5_ROUTE_TO_USB		_BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define LPC32XX_UART_ENABLED_CLOCKS(n)		(((n) >> 16) & 0x7F)
+#define LPC32XX_UART_ENABLED_CLOCK(n, u)	(((n) >> (16 + (u))) & 0x1)
+#define LPC32XX_UART_ENABLED_CLKS_ANY		_BIT(14)
+#define LPC32XX_UART_CLKMODE_OFF		0x0
+#define LPC32XX_UART_CLKMODE_ON			0x1
+#define LPC32XX_UART_CLKMODE_AUTO		0x2
+#define LPC32XX_UART_CLKMODE_MASK(u)		(0x3 << ((((u) - 3) * 2) + 4))
+#define LPC32XX_UART_CLKMODE_LOAD(m, u)		((m) << ((((u) - 3) * 2) + 4))
+
+/*
+ * GPIO Module Register offsets
+ */
+#define _GPREG(x)				io_p2v(LPC32XX_GPIO_BASE + (x))
+#define LPC32XX_GPIO_P_MUX_SET			_GPREG(0x100)
+#define LPC32XX_GPIO_P_MUX_CLR			_GPREG(0x104)
+#define LPC32XX_GPIO_P_MUX_STATE		_GPREG(0x108)
+#define LPC32XX_GPIO_P3_MUX_SET			_GPREG(0x110)
+#define LPC32XX_GPIO_P3_MUX_CLR			_GPREG(0x114)
+#define LPC32XX_GPIO_P3_MUX_STATE		_GPREG(0x118)
+#define LPC32XX_GPIO_P0_MUX_SET			_GPREG(0x120)
+#define LPC32XX_GPIO_P0_MUX_CLR			_GPREG(0x124)
+#define LPC32XX_GPIO_P0_MUX_STATE		_GPREG(0x128)
+#define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
+#define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
+#define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 0000000..df3b0de
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	extern void lpc32xx_watchdog_reset(void);
+
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: Rebooting system\n");
+
+		/* Disable interrupts */
+		local_irq_disable();
+
+		lpc32xx_watchdog_reset();
+		break;
+
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Wait for watchdog to reset system */
+	while (1)
+		;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 0000000..8d4066b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE	13000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 0000000..c142487
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+/*
+ * Uncompress output is hardcoded to standard UART 5
+ */
+
+#define UART_FIFO_CTL_TX_RESET	(1 << 2)
+#define UART_STATUS_TX_MT	(1 << 6)
+
+#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
+
+#define LPC32XX_UART_DLLFIFO_O	0x00
+#define LPC32XX_UART_IIRFCR_O	0x08
+#define LPC32XX_UART_LSR_O	0x14
+
+static inline void putc(int ch)
+{
+	/* Wait for transmit FIFO to empty */
+	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
+		UART_STATUS_TX_MT) == 0)
+		;
+
+	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
+}
+
+static inline void flush(void)
+{
+	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
+		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
+}
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..d1d936c7
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	0xF0000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
new file mode 100644
index 0000000..bd0df26
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -0,0 +1,432 @@
+/*
+ * arch/arm/mach-lpc32xx/irq.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Default value representing the Activation polarity of all internal
+ * interrupt sources
+ */
+#define MIC_APR_DEFAULT		0x3FF0EFE0
+#define SIC1_APR_DEFAULT	0xFBD27186
+#define SIC2_APR_DEFAULT	0x801810C0
+
+/*
+ * Default value representing the Activation Type of all internal
+ * interrupt sources. All are level sensitive.
+ */
+#define MIC_ATR_DEFAULT		0x00000000
+#define SIC1_ATR_DEFAULT	0x00026000
+#define SIC2_ATR_DEFAULT	0x00000000
+
+struct lpc32xx_event_group_regs {
+	void __iomem *enab_reg;
+	void __iomem *edge_reg;
+	void __iomem *maskstat_reg;
+	void __iomem *rawstat_reg;
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
+	.enab_reg = LPC32XX_CLKPWR_INT_ER,
+	.edge_reg = LPC32XX_CLKPWR_INT_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_INT_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_INT_RS,
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
+	.enab_reg = LPC32XX_CLKPWR_PIN_ER,
+	.edge_reg = LPC32XX_CLKPWR_PIN_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
+};
+
+struct lpc32xx_event_info {
+	const struct lpc32xx_event_group_regs *event_group;
+	u32 mask;
+};
+
+/*
+ * Maps an IRQ number to and event mask and register
+ */
+static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
+	[IRQ_LPC32XX_GPI_08] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
+	},
+	[IRQ_LPC32XX_GPI_09] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
+	},
+	[IRQ_LPC32XX_GPI_19] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
+	},
+	[IRQ_LPC32XX_GPI_07] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
+	},
+	[IRQ_LPC32XX_GPI_00] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
+	},
+	[IRQ_LPC32XX_GPI_01] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
+	},
+	[IRQ_LPC32XX_GPI_02] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
+	},
+	[IRQ_LPC32XX_GPI_03] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
+	},
+	[IRQ_LPC32XX_GPI_04] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
+	},
+	[IRQ_LPC32XX_GPI_05] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
+	},
+	[IRQ_LPC32XX_GPI_06] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_00] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_01] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_02] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_03] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_04] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_05] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
+	},
+	[IRQ_LPC32XX_KEY] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
+	},
+	[IRQ_LPC32XX_USB_OTG_ATX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
+	},
+	[IRQ_LPC32XX_USB_HOST] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
+	},
+	[IRQ_LPC32XX_RTC] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+	},
+	[IRQ_LPC32XX_MSTIMER] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
+	},
+	[IRQ_LPC32XX_TS_AUX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
+	},
+	[IRQ_LPC32XX_TS_P] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
+	},
+	[IRQ_LPC32XX_TS_IRQ] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
+	},
+};
+
+static void get_controller(unsigned int irq, unsigned int *base,
+	unsigned int *irqbit)
+{
+	if (irq < 32) {
+		*base = LPC32XX_MIC_BASE;
+		*irqbit = 1 << irq;
+	} else if (irq < 64) {
+		*base = LPC32XX_SIC1_BASE;
+		*irqbit = 1 << (irq - 32);
+	} else {
+		*base = LPC32XX_SIC2_BASE;
+		*irqbit = 1 << (irq - 64);
+	}
+}
+
+static void lpc32xx_mask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_unmask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_ack_irq(unsigned int irq)
+{
+	unsigned int ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
+
+	/* Also need to clear pending wake event */
+	if (lpc32xx_events[irq].mask != 0)
+		__raw_writel(lpc32xx_events[irq].mask,
+			lpc32xx_events[irq].event_group->rawstat_reg);
+}
+
+static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
+	int use_edge)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	/* Activation level, high or low */
+	reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
+	if (use_high_level)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
+
+	/* Activation type, edge or level */
+	reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
+	if (use_edge)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
+
+	/* Use same polarity for the wake events */
+	if (lpc32xx_events[irq].mask != 0) {
+		reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
+
+		if (use_high_level)
+			reg |= lpc32xx_events[irq].mask;
+		else
+			reg &= ~lpc32xx_events[irq].mask;
+
+		__raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
+	}
+}
+
+static int lpc32xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		/* Rising edge sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 1);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		/* Falling edge sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 1);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		/* Low level sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 0);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* High level sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 0);
+		break;
+
+	/* Other modes are not supported */
+	default:
+		return -EINVAL;
+	}
+
+	/* Ok to use the level handler for all types */
+	set_irq_handler(irq, handle_level_irq);
+
+	return 0;
+}
+
+static int lpc32xx_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long eventreg;
+
+	if (lpc32xx_events[irqno].mask != 0) {
+		eventreg = __raw_readl(lpc32xx_events[irqno].
+			event_group->enab_reg);
+
+		if (state)
+			eventreg |= lpc32xx_events[irqno].mask;
+		else
+			eventreg &= ~lpc32xx_events[irqno].mask;
+
+		__raw_writel(eventreg,
+			lpc32xx_events[irqno].event_group->enab_reg);
+
+		return 0;
+	}
+
+	/* Clear event */
+	__raw_writel(lpc32xx_events[irqno].mask,
+		lpc32xx_events[irqno].event_group->rawstat_reg);
+
+	return -ENODEV;
+}
+
+static void __init lpc32xx_set_default_mappings(unsigned int apr,
+	unsigned int atr, unsigned int offset)
+{
+	unsigned int i;
+
+	/* Set activation levels for each interrupt */
+	i = 0;
+	while (i < 32) {
+		__lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
+			((atr >> i) & 0x1));
+		i++;
+	}
+}
+
+static struct irq_chip lpc32xx_irq_chip = {
+	.ack = lpc32xx_ack_irq,
+	.mask = lpc32xx_mask_irq,
+	.unmask = lpc32xx_unmask_irq,
+	.set_type = lpc32xx_set_irq_type,
+	.set_wake = lpc32xx_irq_wake
+};
+
+static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
+	}
+}
+
+static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
+	}
+}
+
+void __init lpc32xx_init_irq(void)
+{
+	unsigned int i;
+
+	/* Setup MIC */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
+
+	/* Setup SIC1 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+
+	/* Setup SIC2 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+
+	/* Configure supported IRQ's */
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &lpc32xx_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* Set default mappings */
+	lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
+	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
+	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
+
+	/* mask all interrupts except SUBIRQ */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+
+	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
+	set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
+	set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
+
+	/* Initially disable all wake events */
+	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
+
+	/*
+	 * Default wake activation polarities, all pin sources are low edge
+	 * triggered
+	 */
+	__raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
+		LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
+		LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+		LPC32XX_CLKPWR_INT_AP);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
+
+	/* Clear latched wake event states */
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
+		LPC32XX_CLKPWR_PIN_RS);
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
+		LPC32XX_CLKPWR_INT_RS);
+}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
new file mode 100644
index 0000000..bc9a42d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -0,0 +1,397 @@
+/*
+ * arch/arm/mach-lpc32xx/phy3250.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/amba/pl022.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Mapped GPIOLIB GPIOs
+ */
+#define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
+
+/*
+ * AMBA LCD controller
+ */
+static struct clcd_panel conn_lcd_panel = {
+	.mode		= {
+		.name		= "QVGA portrait",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 191828,
+		.left_margin	= 22,
+		.right_margin	= 11,
+		.upper_margin	= 2,
+		.lower_margin	= 1,
+		.hsync_len	= 5,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= (TIM2_IVS | TIM2_IHS),
+	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+				CNTL_LCDBPP16_565),
+	.bpp		= 16,
+};
+#define PANEL_SIZE (3 * SZ_64K)
+
+static int lpc32xx_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+		PANEL_SIZE, &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = PANEL_SIZE;
+	fb->panel = &conn_lcd_panel;
+
+	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			LCD_POWER_GPIO);
+	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			LCD_POWER_GPIO);
+
+	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			BKL_POWER_GPIO);
+	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			BKL_POWER_GPIO);
+
+	return 0;
+}
+
+static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+		fb->fb.screen_base, fb->fb.fix.smem_start,
+		fb->fb.fix.smem_len);
+}
+
+static void lpc32xx_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+/*
+ * On some early LCD modules (1307.0), the backlight logic is inverted.
+ * For those board variants, swap the disable and enable states for
+ * BKL_POWER_GPIO.
+*/
+static void clcd_disable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 0);
+	gpio_set_value(LCD_POWER_GPIO, 0);
+}
+
+static void clcd_enable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 1);
+	gpio_set_value(LCD_POWER_GPIO, 1);
+}
+
+static struct clcd_board lpc32xx_clcd_data = {
+	.name		= "Phytec LCD",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= clcd_disable,
+	.enable		= clcd_enable,
+	.setup		= lpc32xx_clcd_setup,
+	.mmap		= lpc32xx_clcd_mmap,
+	.remove		= lpc32xx_clcd_remove,
+};
+
+static struct amba_device lpc32xx_clcd_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:clcd",
+		.platform_data		= &lpc32xx_clcd_data,
+	},
+	.res				= {
+		.start			= LPC32XX_LCD_BASE,
+		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
+};
+
+/*
+ * AMBA SSP (SPI)
+ */
+static void phy3250_spi_cs_set(u32 control)
+{
+	gpio_set_value(SPI0_CS_GPIO, (int) control);
+}
+
+static struct pl022_config_chip spi0_chip_info = {
+	.lbm			= LOOPBACK_DISABLED,
+	.com_mode		= INTERRUPT_TRANSFER,
+	.iface			= SSP_INTERFACE_MOTOROLA_SPI,
+	.hierarchy		= SSP_MASTER,
+	.slave_tx_disable	= 0,
+	.endian_tx		= SSP_TX_LSB,
+	.endian_rx		= SSP_RX_LSB,
+	.data_size		= SSP_DATA_BITS_8,
+	.rx_lev_trig		= SSP_RX_4_OR_MORE_ELEM,
+	.tx_lev_trig		= SSP_TX_4_OR_MORE_EMPTY_LOC,
+	.clk_phase		= SSP_CLK_FIRST_EDGE,
+	.clk_pol		= SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len		= SSP_BITS_8,
+	.wait_state		= SSP_MWIRE_WAIT_ZERO,
+	.duplex			= SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	.cs_control		= phy3250_spi_cs_set,
+};
+
+static struct pl022_ssp_controller lpc32xx_ssp0_data = {
+	.bus_id			= 0,
+	.num_chipselect		= 1,
+	.enable_dma		= 0,
+};
+
+static struct amba_device lpc32xx_ssp0_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:ssp0",
+		.platform_data		= &lpc32xx_ssp0_data,
+	},
+	.res				= {
+		.start			= LPC32XX_SSP0_BASE,
+		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
+};
+
+/* AT25 driver registration */
+static int __init phy3250_spi_board_register(void)
+{
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "spidev",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+
+#else
+	static struct spi_eeprom eeprom = {
+		.name = "at25256a",
+		.byte_len = 0x8000,
+		.page_size = 64,
+		.flags = EE_ADDR2,
+	};
+
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "at25",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.platform_data = &eeprom,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+#endif
+	return spi_register_board_info(info, ARRAY_SIZE(info));
+}
+arch_initcall(phy3250_spi_board_register);
+
+static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led phy_leds[] = {
+	{
+		.name			= "led0",
+		.gpio			= LED_GPIO,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
+static struct gpio_led_platform_data led_data = {
+	.leds = phy_leds,
+	.num_leds = ARRAY_SIZE(phy_leds),
+};
+
+static struct platform_device lpc32xx_gpio_led_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &led_data,
+};
+
+static struct platform_device *phy3250_devs[] __initdata = {
+	&lpc32xx_i2c0_device,
+	&lpc32xx_i2c1_device,
+	&lpc32xx_i2c2_device,
+	&lpc32xx_watchdog_device,
+	&lpc32xx_gpio_led_device,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&lpc32xx_clcd_device,
+	&lpc32xx_ssp0_device,
+};
+
+/*
+ * Board specific functions
+ */
+static void __init phy3250_board_init(void)
+{
+	u32 tmp;
+	int i;
+
+	lpc32xx_gpio_init();
+
+	/* Register GPIOs used on this board */
+	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			SPI0_CS_GPIO);
+	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			SPI0_CS_GPIO);
+
+	/* Setup network interface for RMII mode */
+	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+
+	/* Setup SLC NAND controller muxing */
+	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
+		LPC32XX_CLKPWR_NAND_CLK_CTRL);
+
+	/* Setup LCD muxing to RGB565 */
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
+		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
+		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
+	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
+	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	/* Set up I2C pull levels */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
+	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
+		LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
+
+	/* Disable IrDA pulsing support on UART6 */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	/* Enable DMA for I2S1 channel */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
+	tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
+
+	lpc32xx_serial_init();
+
+	/*
+	 * AMBA peripheral clocks need to be enabled prior to AMBA device
+	 * detection or a data fault will occur, so enable the clocks
+	 * here. However, we don't want to enable them if the peripheral
+	 * isn't included in the image
+	 */
+#ifdef CONFIG_FB_ARMCLCD
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+#endif
+#ifdef CONFIG_SPI_PL022
+	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
+		LPC32XX_CLKPWR_SSP_CLK_CTRL);
+#endif
+
+	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+	/* Test clock needed for UDA1380 initial init */
+	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
+		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
+		LPC32XX_CLKPWR_TEST_CLK_SEL);
+
+	i2c_register_board_info(0, phy3250_i2c_board_info,
+		ARRAY_SIZE(phy3250_i2c_board_info));
+}
+
+static int __init lpc32xx_display_uid(void)
+{
+	u32 uid[4];
+
+	lpc32xx_get_uid(uid);
+
+	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+		uid[3], uid[2], uid[1], uid[0]);
+
+	return 1;
+}
+arch_initcall(lpc32xx_display_uid);
+
+MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
+	/* Maintainer: Kevin Wells, NXP Semiconductors */
+	.phys_io	= LPC32XX_UART5_BASE,
+	.io_pg_offst	= ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= lpc32xx_map_io,
+	.init_irq	= lpc32xx_init_irq,
+	.timer		= &lpc32xx_timer,
+	.init_machine	= phy3250_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
new file mode 100644
index 0000000..a6e2aed
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-lpc32xx/pm.c
+ *
+ * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * LPC32XX CPU and system power management
+ *
+ * The LCP32XX has three CPU modes for controlling system power: run,
+ * direct-run, and halt modes. When switching between halt and run modes,
+ * the CPU transistions through direct-run mode. For Linux, direct-run
+ * mode is not used in normal operation. Halt mode is used when the
+ * system is fully suspended.
+ *
+ * Run mode:
+ * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
+ * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
+ * the HCLK_PLL rate. Linux runs in this mode.
+ *
+ * Direct-run mode:
+ * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
+ * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
+ * source or the frequency of the main oscillator. In this mode, the
+ * HCLK_PLL can be safely enabled, changed, or disabled.
+ *
+ * Halt mode:
+ * SYSCLK is gated off and the CPU and system clocks are halted.
+ * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
+ * key scanner, etc.) still operate if enabled. In this state, an enabled
+ * system event (ie, GPIO state change, RTC match, key press, etc.) will
+ * wake the system up back into direct-run mode.
+ *
+ * DRAM refresh
+ * DRAM clocking and refresh are slightly different for systems with DDR
+ * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
+ * SDRAM will still be accessible in direct-run mode. In DDR based systems,
+ * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * Because of this, the code to switch power modes and the code to enter
+ * and exit DRAM self-refresh modes must not be executed in DRAM. A small
+ * section of IRAM is used instead for this.
+ *
+ * Suspend is handled with the following logic:
+ *  Backup a small area of IRAM used for the suspend code
+ *  Copy suspend code to IRAM
+ *  Transfer control to code in IRAM
+ *  Places DRAMs in self-refresh mode
+ *  Enter direct-run mode
+ *  Save state of HCLK_PLL PLL
+ *  Disable HCLK_PLL PLL
+ *  Enter halt mode - CPU and buses will stop
+ *  System enters direct-run mode when an enabled event occurs
+ *  HCLK PLL state is restored
+ *  Run mode is entered
+ *  DRAMS are placed back into normal mode
+ *  Code execution returns from IRAM
+ *  IRAM code are used for suspend is restored
+ *  Suspend mode is exited
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+#include "clock.h"
+
+#define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
+
+/*
+ * Both STANDBY and MEM suspend states are handled the same with no
+ * loss of CPU or memory state
+ */
+static int lpc32xx_pm_enter(suspend_state_t state)
+{
+	int (*lpc32xx_suspend_ptr) (void);
+	void *iram_swap_area;
+
+	/* Allocate some space for temporary IRAM storage */
+	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
+	if (!iram_swap_area) {
+		printk(KERN_ERR
+		       "PM Suspend: cannot allocate memory to save portion "
+			"of SRAM\n");
+		return -ENOMEM;
+	}
+
+	/* Backup a small area of IRAM used for the suspend code */
+	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
+		lpc32xx_sys_suspend_sz);
+
+	/*
+	 * Copy code to suspend system into IRAM. The suspend code
+	 * needs to run from IRAM as DRAM may no longer be available
+	 * when the PLL is stopped.
+	 */
+	memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
+		lpc32xx_sys_suspend_sz);
+	flush_icache_range((unsigned long)TEMP_IRAM_AREA,
+		(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
+
+	/* Transfer to suspend code in IRAM */
+	lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
+	flush_cache_all();
+	(void) lpc32xx_suspend_ptr();
+
+	/* Restore original IRAM contents */
+	memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
+		lpc32xx_sys_suspend_sz);
+
+	kfree(iram_swap_area);
+
+	return 0;
+}
+
+static struct platform_suspend_ops lpc32xx_pm_ops = {
+	.valid	= suspend_valid_only_mem,
+	.enter	= lpc32xx_pm_enter,
+};
+
+#define EMC_DYN_MEM_CTRL_OFS 0x20
+#define EMC_SRMMC           (1 << 3)
+#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
+static int __init lpc32xx_pm_init(void)
+{
+	/*
+	 * Setup SDRAM self-refresh clock to automatically disable o
+	 * start of self-refresh. This only needs to be done once.
+	 */
+	__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
+
+	suspend_set_ops(&lpc32xx_pm_ops);
+
+	return 0;
+}
+arch_initcall(lpc32xx_pm_init);
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
new file mode 100644
index 0000000..429cfdb
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-lpc32xx/serial.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_SUART_FIFO_SIZE	64
+
+/* Standard 8250/16550 compatible serial ports */
+static struct plat_serial8250_port serial_std_platform_data[] = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.membase        = io_p2v(LPC32XX_UART5_BASE),
+		.mapbase        = LPC32XX_UART5_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR5,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART3_BASE),
+		.mapbase        = LPC32XX_UART3_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR3,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART4_BASE),
+		.mapbase        = LPC32XX_UART4_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR4,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART6_BASE),
+		.mapbase        = LPC32XX_UART6_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR6,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+struct uartinit {
+	char *uart_ck_name;
+	u32 ck_mode_mask;
+	void __iomem *pdiv_clk_reg;
+};
+
+static struct uartinit uartinit_data[] __initdata = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.uart_ck_name = "uart5_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.uart_ck_name = "uart3_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.uart_ck_name = "uart4_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.uart_ck_name = "uart6_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+	},
+#endif
+};
+
+static struct platform_device serial_std_platform_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_std_platform_data,
+	},
+};
+
+static struct platform_device *lpc32xx_serial_devs[] __initdata = {
+	&serial_std_platform_device,
+};
+
+void __init lpc32xx_serial_init(void)
+{
+	u32 tmp, clkmodes = 0;
+	struct clk *clk;
+	unsigned int puart;
+	int i, j;
+
+	/* UART clocks are off, let clock driver manage them */
+	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
+		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			serial_std_platform_data[i].uartclk =
+				clk_get_rate(clk);
+		}
+
+		/* Fall back on main osc rate if clock rate return fails */
+		if (serial_std_platform_data[i].uartclk == 0)
+			serial_std_platform_data[i].uartclk =
+				LPC32XX_MAIN_OSC_FREQ;
+
+		/* Setup UART clock modes for all UARTs, disable autoclock */
+		clkmodes |= uartinit_data[i].ck_mode_mask;
+
+		/* pre-UART clock divider set to 1 */
+		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+	}
+
+	/* This needs to be done after all UART clocks are setup */
+	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
+	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+		/* Force a flush of the RX FIFOs to work around a HW bug */
+		puart = serial_std_platform_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
+	}
+
+	/* Disable UART5->USB transparent mode or USB won't work */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	platform_add_devices(lpc32xx_serial_devs,
+		ARRAY_SIZE(lpc32xx_serial_devs));
+}
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
new file mode 100644
index 0000000..374f9f0
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-lpc32xx/suspend.S
+ *
+ * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/* Using named register defines makes the code easier to follow */
+#define WORK1_REG			r0
+#define WORK2_REG			r1
+#define SAVED_HCLK_DIV_REG		r2
+#define SAVED_HCLK_PLL_REG		r3
+#define SAVED_DRAM_CLKCTRL_REG		r4
+#define SAVED_PWR_CTRL_REG		r5
+#define CLKPWRBASE_REG			r6
+#define EMCBASE_REG			r7
+
+#define LPC32XX_EMC_STATUS_OFFS		0x04
+#define LPC32XX_EMC_STATUS_BUSY		0x1
+#define LPC32XX_EMC_STATUS_SELF_RFSH	0x4
+
+#define LPC32XX_CLKPWR_PWR_CTRL_OFFS	0x44
+#define LPC32XX_CLKPWR_HCLK_DIV_OFFS	0x40
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
+
+#define CLKPWR_PCLK_DIV_MASK		0xFFFFFE7F
+
+	.text
+
+ENTRY(lpc32xx_sys_suspend)
+	@ Save a copy of the used registers in IRAM, r0 is corrupted
+	adr	r0, tmp_stack_end
+	stmfd	r0!, {r3 - r7, sp, lr}
+
+	@ Load a few common register addresses
+	adr	WORK1_REG, reg_bases
+	ldr	CLKPWRBASE_REG, [WORK1_REG, #0]
+	ldr	EMCBASE_REG, [WORK1_REG, #4]
+
+	ldr	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
+
+	@ Wait for SDRAM busy status to go busy and then idle
+	@ This guarantees a small windows where DRAM isn't busy
+1:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	bne	1b @ Branch while idle
+2:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	beq	2b @ Branch until idle
+
+	@ Setup self-refresh with support for manual exit of
+	@ self-refresh mode
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for self-refresh acknowledge, clocks to the DRAM device
+	@ will automatically stop on start of self-refresh
+3:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	3b @ Branch until self-refresh mode starts
+
+	@ Enter direct-run mode from run mode
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Safe disable of DRAM clock in EMC block, prevents DDR sync
+	@ issues on restart
+	ldr	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+	and	WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Save HCLK PLL state and disable HCLK PLL
+	ldr	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	bic	WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+
+	@ Enter stop mode until an enabled event occurs
+	orr	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	.rept 9
+	nop
+	.endr
+
+	@ Clear stop status
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+
+	@ Restore original HCLK PLL value and wait for PLL lock
+	str	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+4:
+	ldr	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
+	bne	4b
+
+	@ Re-enter run mode with self-refresh flag cleared, but no DRAM
+	@ update yet. DRAM is still in self-refresh
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Restore original DRAM clock mode to restore DRAM clocks
+	str	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Clear self-refresh mode
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG,\
+		#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for EMC to clear self-refresh mode
+5:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	5b @ Branch until self-refresh has exited
+
+	@ restore regs and return
+	adr	r0, tmp_stack
+	ldmfd	r0!, {r3 - r7, sp, pc}
+
+reg_bases:
+	.long	IO_ADDRESS(LPC32XX_CLK_PM_BASE)
+	.long	IO_ADDRESS(LPC32XX_EMC_BASE)
+
+tmp_stack:
+	.long	0, 0, 0, 0, 0, 0, 0
+tmp_stack_end:
+
+ENTRY(lpc32xx_sys_suspend_sz)
+	.word	. - lpc32xx_sys_suspend
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
new file mode 100644
index 0000000..630dd4a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mach-lpc32xx/timer.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009 - 2010 NXP Semiconductors
+ * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
+ *                    Ed Schouten <e.schouten@fontys.nl>
+ *                    Laurens Timmermans <l.timmermans@fontys.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
+{
+	return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
+}
+
+static struct clocksource lpc32xx_clksrc = {
+	.name	= "lpc32xx_clksrc",
+	.shift	= 24,
+	.rating	= 300,
+	.read	= lpc32xx_clksrc_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+    struct clock_event_device *dev)
+{
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+
+	return 0;
+}
+
+static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
+    struct clock_event_device *dev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		WARN_ON(1);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/*
+		 * Disable the timer. When using oneshot, we must also
+		 * disable the timer to wait for the first call to
+		 * set_next_event().
+		 */
+		__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device lpc32xx_clkevt = {
+	.name		= "lpc32xx_clkevt",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= lpc32xx_clkevt_next_event,
+	.set_mode	= lpc32xx_clkevt_mode,
+};
+
+static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &lpc32xx_clkevt;
+
+	/* Clear match */
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction lpc32xx_timer_irq = {
+	.name		= "LPC32XX Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= lpc32xx_timer_interrupt,
+};
+
+/*
+ * The clock management driver isn't initialized at this point, so the
+ * clocks need to be enabled here manually and then tagged as used in
+ * the clock driver initialization
+ */
+static void __init lpc32xx_timer_init(void)
+{
+	u32 clkrate, pllreg;
+
+	/* Enable timer clock */
+	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
+		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
+
+	/*
+	 * The clock driver isn't initialized at this point. So determine if
+	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
+	 * it to compute the PLL frequency and the PCLK divider to get the base
+	 * timer rates. This rate is needed to compute the tick rate.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clkrate = LPC32XX_MAIN_OSC_FREQ;
+	else
+		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
+
+	/* Get ARM HCLKPLL register and convert it into a frequency */
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
+
+	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
+	clkrate = clkrate / clk_get_pclk_div();
+
+	/* Initial timer setup */
+	__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+	__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
+		LCP32XX_TIMER_CNTR_MCR_STOP(0) |
+		LCP32XX_TIMER_CNTR_MCR_RESET(0),
+		LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+
+	/* Setup tick interrupt */
+	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
+
+	/* Setup the clockevent structure. */
+	lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
+		lpc32xx_clkevt.shift);
+	lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
+		&lpc32xx_clkevt);
+	lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
+		&lpc32xx_clkevt) + 1;
+	lpc32xx_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&lpc32xx_clkevt);
+
+	/* Use timer1 as clock source. */
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
+		lpc32xx_clksrc.shift);
+	clocksource_register(&lpc32xx_clksrc);
+}
+
+struct sys_timer lpc32xx_timer = {
+	.init		= &lpc32xx_timer_init,
+};
+
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 66677f0..7ff8020 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -15,7 +15,7 @@
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
-obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
new file mode 100644
index 0000000..523d213
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "board-trout.h"
+
+struct msm_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*reg;	/* Base of register bank */
+	u8			shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	return !!(readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	if (val)
+		msm_gpio->shadow |= mask;
+	else
+		msm_gpio->shadow &= ~mask;
+
+	writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	msm_gpiolib_set(chip, offset, 0);
+	return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	msm_gpiolib_set(chip, offset, val);
+	return 0;
+}
+
+#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = msm_gpiolib_direction_input,\
+			.direction_output = msm_gpiolib_direction_output, \
+			.get		  = msm_gpiolib_get,		\
+			.set		  = msm_gpiolib_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = 8,				\
+		},							\
+		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
+		.shadow = shadow_val,					\
+	}
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+	/* H2W pins <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
+#else
+	/* H2W pins <-> UART3, Bluetooth <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x80),
+#endif
+	/* I2C pull */
+	TROUT_GPIO_BANK("MISC3", 0x02,   TROUT_GPIO_MISC3_BASE, 0x04),
+	TROUT_GPIO_BANK("MISC4", 0x04,   TROUT_GPIO_MISC4_BASE, 0),
+	/* mmdi 32k en */
+	TROUT_GPIO_BANK("MISC5", 0x06,   TROUT_GPIO_MISC5_BASE, 0x04),
+	TROUT_GPIO_BANK("INT2", 0x08,    TROUT_GPIO_INT2_BASE,  0),
+	TROUT_GPIO_BANK("MISC1", 0x0a,   TROUT_GPIO_MISC1_BASE, 0),
+	TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
+};
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init trout_init_gpio(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+		gpiochip_add(&msm_gpio_banks[i].chip);
+
+	return 0;
+}
+
+postcore_initcall(trout_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index dca5a5f..e69a150 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -50,7 +50,6 @@
 {
 	mi->nr_banks = 1;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = (101*1024*1024);
 }
 
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5..651851c 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -1,5 +1,162 @@
+/* linux/arch/arm/mach-msm/board-trout.h
+** Author: Brian Swetland <swetland@google.com>
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE		0x00000000
+#define MSM_SMI_SIZE		0x00800000
+
+#define MSM_EBI_BASE		0x10000000
+#define MSM_EBI_SIZE		0x06e00000
+
+#define MSM_PMEM_GPU0_BASE	0x00000000
+#define MSM_PMEM_GPU0_SIZE	0x00700000
+
+#define MSM_PMEM_MDP_BASE	0x02000000
+#define MSM_PMEM_MDP_SIZE	0x00800000
+
+#define MSM_PMEM_ADSP_BASE      0x02800000
+#define MSM_PMEM_ADSP_SIZE	0x00800000
+
+#define MSM_PMEM_CAMERA_BASE	0x03000000
+#define MSM_PMEM_CAMERA_SIZE	0x00800000
+
+#define MSM_FB_BASE		0x03800000
+#define MSM_FB_SIZE		0x00100000
+
+#define MSM_LINUX_BASE		MSM_EBI_BASE
+#define MSM_LINUX_SIZE		0x06500000
+
+#define MSM_PMEM_GPU1_SIZE	0x800000
+#define MSM_PMEM_GPU1_BASE	(MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
+
+#define MSM_RAM_CONSOLE_BASE	(MSM_EBI_BASE + 0x6d00000)
+#define MSM_RAM_CONSOLE_SIZE	(128 * SZ_1K)
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define TROUT_4_BALL_UP_0     1
+#define TROUT_4_BALL_LEFT_0   18
+#define TROUT_4_BALL_DOWN_0   57
+#define TROUT_4_BALL_RIGHT_0  91
+
+#define TROUT_5_BALL_UP_0     94
+#define TROUT_5_BALL_LEFT_0   18
+#define TROUT_5_BALL_DOWN_0   90
+#define TROUT_5_BALL_RIGHT_0  19
+
+#define TROUT_POWER_KEY     20
+
+#define TROUT_4_TP_LS_EN    19
+#define TROUT_5_TP_LS_EN    1
 
 #define TROUT_CPLD_BASE   0xE8100000
 #define TROUT_CPLD_START  0x98000000
 #define TROUT_CPLD_SIZE   SZ_4K
 
+#define TROUT_GPIO_CABLE_IN1		(83)
+#define TROUT_GPIO_CABLE_IN2		(49)
+
+#define TROUT_GPIO_START (128)
+
+#define TROUT_GPIO_INT_MASK0_REG            (0x0c)
+#define TROUT_GPIO_INT_STAT0_REG            (0x0e)
+#define TROUT_GPIO_INT_MASK1_REG            (0x14)
+#define TROUT_GPIO_INT_STAT1_REG            (0x10)
+
+#define TROUT_GPIO_HAPTIC_PWM               (28)
+#define TROUT_GPIO_PS_HOLD                  (25)
+
+#define TROUT_GPIO_MISC2_BASE               (TROUT_GPIO_START + 0x00)
+#define TROUT_GPIO_MISC3_BASE               (TROUT_GPIO_START + 0x08)
+#define TROUT_GPIO_MISC4_BASE               (TROUT_GPIO_START + 0x10)
+#define TROUT_GPIO_MISC5_BASE               (TROUT_GPIO_START + 0x18)
+#define TROUT_GPIO_INT2_BASE                (TROUT_GPIO_START + 0x20)
+#define TROUT_GPIO_MISC1_BASE               (TROUT_GPIO_START + 0x28)
+#define TROUT_GPIO_VIRTUAL_BASE             (TROUT_GPIO_START + 0x30)
+#define TROUT_GPIO_INT5_BASE                (TROUT_GPIO_START + 0x48)
+
+#define TROUT_GPIO_CHARGER_EN               (TROUT_GPIO_MISC2_BASE + 0)
+#define TROUT_GPIO_ISET                     (TROUT_GPIO_MISC2_BASE + 1)
+#define TROUT_GPIO_H2W_DAT_DIR              (TROUT_GPIO_MISC2_BASE + 2)
+#define TROUT_GPIO_H2W_CLK_DIR              (TROUT_GPIO_MISC2_BASE + 3)
+#define TROUT_GPIO_H2W_DAT_GPO              (TROUT_GPIO_MISC2_BASE + 4)
+#define TROUT_GPIO_H2W_CLK_GPO              (TROUT_GPIO_MISC2_BASE + 5)
+#define TROUT_GPIO_H2W_SEL0                 (TROUT_GPIO_MISC2_BASE + 6)
+#define TROUT_GPIO_H2W_SEL1                 (TROUT_GPIO_MISC2_BASE + 7)
+
+#define TROUT_GPIO_SPOTLIGHT_EN             (TROUT_GPIO_MISC3_BASE + 0)
+#define TROUT_GPIO_FLASH_EN                 (TROUT_GPIO_MISC3_BASE + 1)
+#define TROUT_GPIO_I2C_PULL                 (TROUT_GPIO_MISC3_BASE + 2)
+#define TROUT_GPIO_TP_I2C_PULL              (TROUT_GPIO_MISC3_BASE + 3)
+#define TROUT_GPIO_TP_EN                    (TROUT_GPIO_MISC3_BASE + 4)
+#define TROUT_GPIO_JOG_EN                   (TROUT_GPIO_MISC3_BASE + 5)
+#define TROUT_GPIO_UI_LED_EN                (TROUT_GPIO_MISC3_BASE + 6)
+#define TROUT_GPIO_QTKEY_LED_EN             (TROUT_GPIO_MISC3_BASE + 7)
+
+#define TROUT_GPIO_VCM_PWDN                 (TROUT_GPIO_MISC4_BASE + 0)
+#define TROUT_GPIO_USB_H2W_SW               (TROUT_GPIO_MISC4_BASE + 1)
+#define TROUT_GPIO_COMPASS_RST_N            (TROUT_GPIO_MISC4_BASE + 2)
+#define TROUT_GPIO_HAPTIC_EN_UP             (TROUT_GPIO_MISC4_BASE + 3)
+#define TROUT_GPIO_HAPTIC_EN_MAIN           (TROUT_GPIO_MISC4_BASE + 4)
+#define TROUT_GPIO_USB_PHY_RST_N            (TROUT_GPIO_MISC4_BASE + 5)
+#define TROUT_GPIO_WIFI_PA_RESETX           (TROUT_GPIO_MISC4_BASE + 6)
+#define TROUT_GPIO_WIFI_EN                  (TROUT_GPIO_MISC4_BASE + 7)
+
+#define TROUT_GPIO_BT_32K_EN                (TROUT_GPIO_MISC5_BASE + 0)
+#define TROUT_GPIO_MAC_32K_EN               (TROUT_GPIO_MISC5_BASE + 1)
+#define TROUT_GPIO_MDDI_32K_EN              (TROUT_GPIO_MISC5_BASE + 2)
+#define TROUT_GPIO_COMPASS_32K_EN           (TROUT_GPIO_MISC5_BASE + 3)
+
+#define TROUT_GPIO_NAVI_ACT_N               (TROUT_GPIO_INT2_BASE + 0)
+#define TROUT_GPIO_COMPASS_IRQ              (TROUT_GPIO_INT2_BASE + 1)
+#define TROUT_GPIO_SLIDING_DET              (TROUT_GPIO_INT2_BASE + 2)
+#define TROUT_GPIO_AUD_HSMIC_DET_N          (TROUT_GPIO_INT2_BASE + 3)
+#define TROUT_GPIO_SD_DOOR_N                (TROUT_GPIO_INT2_BASE + 4)
+#define TROUT_GPIO_CAM_BTN_STEP1_N          (TROUT_GPIO_INT2_BASE + 5)
+#define TROUT_GPIO_CAM_BTN_STEP2_N          (TROUT_GPIO_INT2_BASE + 6)
+#define TROUT_GPIO_TP_ATT_N                 (TROUT_GPIO_INT2_BASE + 7)
+#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE   (TROUT_GPIO_NAVI_ACT_N)
+#define TROUT_GPIO_BANK0_LAST_INT_SOURCE    (TROUT_GPIO_TP_ATT_N)
+
+#define TROUT_GPIO_H2W_DAT_GPI              (TROUT_GPIO_MISC1_BASE + 0)
+#define TROUT_GPIO_H2W_CLK_GPI              (TROUT_GPIO_MISC1_BASE + 1)
+#define TROUT_GPIO_CPLD128_VER_0            (TROUT_GPIO_MISC1_BASE + 4)
+#define TROUT_GPIO_CPLD128_VER_1            (TROUT_GPIO_MISC1_BASE + 5)
+#define TROUT_GPIO_CPLD128_VER_2            (TROUT_GPIO_MISC1_BASE + 6)
+#define TROUT_GPIO_CPLD128_VER_3            (TROUT_GPIO_MISC1_BASE + 7)
+
+#define TROUT_GPIO_SDMC_CD_N                (TROUT_GPIO_VIRTUAL_BASE + 0)
+#define TROUT_GPIO_END                      (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE   (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_LAST_INT_SOURCE    (TROUT_GPIO_SDMC_CD_N)
+
+#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
+	(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
+
+#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define TROUT_INT_BANK0_COUNT (8)
+#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_BANK1_COUNT (1)
+#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
+			TROUT_INT_BANK1_COUNT - 1)
+#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
+	(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+	(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
+#define TROUT_BANK_TO_MASK_REG(bank) \
+	(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
+#define TROUT_BANK_TO_STAT_REG(bank) \
+	(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
+
+#endif /* GUARD */
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index d029d1f..02cae5e 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/completion.h>
 #include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 262b441..83e47c0 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -16,6 +16,13 @@
 #ifndef __ASM_ARCH_MSM_GPIO_H
 #define __ASM_ARCH_MSM_GPIO_H
 
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
 /**
  * struct msm_gpio - GPIO pin description
  * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
deleted file mode 100644
index eb7660f..0000000
--- a/arch/arm/mach-mx1/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_MX1
-
-comment "MX1 platforms:"
-
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select MACH_MXLADS
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
deleted file mode 100644
index fc2ddf8..0000000
--- a/arch/arm/mach-mx1/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-y			+= generic.o clock.o devices.o
-
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
deleted file mode 100644
index 8ed1492..0000000
--- a/arch/arm/mach-mx1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	:= 0x08008000
-params_phys-y	:= 0x08000100
-initrd_phys-y	:= 0x08800000
-
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
deleted file mode 100644
index 22e866f..0000000
--- a/arch/arm/mach-mx1/crm_regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
-
-/* CCM register addresses */
-#define CCM_CSCR	(CCM_BASE + 0x0)
-#define CCM_MPCTL0	(CCM_BASE + 0x4)
-#define CCM_MPCTL1	(CCM_BASE + 0x8)
-#define CCM_SPCTL0	(CCM_BASE + 0xC)
-#define CCM_SPCTL1	(CCM_BASE + 0x10)
-#define CCM_PCDR	(CCM_BASE + 0x20)
-
-#define CCM_CSCR_CLKO_OFFSET	29
-#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << 26)
-#define CCM_CSCR_SPLL_RESTART	(1 << 22)
-#define CCM_CSCR_MPLL_RESTART	(1 << 21)
-#define CCM_CSCR_OSC_EN_SHIFT	17
-#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xF << 10)
-#define CCM_CSCR_PRESC		(1 << 15)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		(1 << 0)
-
-#define CCM_PCDR_PCLK3_OFFSET	16
-#define CCM_PCDR_PCLK3_MASK	(0x7F << 16)
-#define CCM_PCDR_PCLK2_OFFSET	4
-#define CCM_PCDR_PCLK2_MASK	(0xF << 4)
-#define CCM_PCDR_PCLK1_OFFSET	0
-#define CCM_PCDR_PCLK1_MASK	0xF
-
-/* SCM register addresses */
-#define SCM_SIDR	(SCM_BASE + 0x0)
-#define SCM_FMCR	(SCM_BASE + 0x4)
-#define SCM_GPCR	(SCM_BASE + 0x8)
-#define SCM_GCCR	(SCM_BASE + 0xC)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
deleted file mode 100644
index b6be29d..0000000
--- a/arch/arm/mach-mx1/devices.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-
-static struct resource imx_csi_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = CSI_INT,
-		.end    = CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx_csi_dmamask = 0xffffffffUL;
-
-struct platform_device imx_csi_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx_csi_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.resource       = imx_csi_resources,
-	.num_resources  = ARRAY_SIZE(imx_csi_resources),
-};
-
-static struct resource imx_i2c_resources[] = {
-	{
-		.start  = 0x00217000,
-		.end    = 0x00217010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = I2C_INT,
-		.end    = I2C_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_i2c_device = {
-	.name           = "imx-i2c",
-	.id             = 0,
-	.resource       = imx_i2c_resources,
-	.num_resources  = ARRAY_SIZE(imx_i2c_resources),
-};
-
-static struct resource imx_uart1_resources[] = {
-	{
-		.start	= UART1_BASE_ADDR,
-		.end	= UART1_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART1_MINT_RX,
-		.end	= UART1_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_TX,
-		.end	= UART1_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-	{
-		.start	= UART2_BASE_ADDR,
-		.end	= UART2_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART2_MINT_RX,
-		.end	= UART2_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_TX,
-		.end	= UART2_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = RTC_INT,
-		.end    = RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = RTC_SAMINT,
-		.end    = RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = WDT_INT,
-		.end    = WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= USBD_INT0,
-		.end	= USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT1,
-		.end	= USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT2,
-		.end	= USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT3,
-		.end	= USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT4,
-		.end	= USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT5,
-		.end	= USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT6,
-		.end	= USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
-		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init mxc_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
deleted file mode 100644
index 0da5d7c..0000000
--- a/arch/arm/mach-mx1/devices.h
+++ /dev/null
@@ -1,7 +0,0 @@
-extern struct platform_device imx_csi_device;
-extern struct platform_device imx_i2c_device;
-extern struct platform_device imx_uart1_device;
-extern struct platform_device imx_uart2_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
deleted file mode 100644
index 742fd4e..0000000
--- a/arch/arm/mach-mx2/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-comment "MX2 platforms:"
-
-config MACH_MX21ADS
-	bool "MX21ADS platform"
-	depends on MACH_MX21
-	help
-	  Include support for MX21ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX27ADS
-	bool "MX27ADS platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	prompt "PHYTEC PCM970 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	depends on MACH_MX27
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27 used
-	  for wifi or eMMC.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	prompt "Eukrea MBIMX27 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
-config MACH_MX27_3DS
-	bool "MX27PDK platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCA100
-	bool "Phytec phyCARD-s (pca100)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCARD-s (aka pca100) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	depends on MACH_MX27
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
deleted file mode 100644
index e3254fa..0000000
--- a/arch/arm/mach-mx2/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y	:=  devices.o serial.o
-
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
-
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
-
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
deleted file mode 100644
index 84ed513..0000000
--- a/arch/arm/mach-mx2/devices.h
+++ /dev/null
@@ -1,42 +0,0 @@
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
-extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index f3b169d5..0000000
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static int eukrea_mbimx27_pins[] = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD28_PF_CSPI1_SS0,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-	{
-		.name			= "backlight",
-		.default_trigger	= "backlight",
-		.active_low		= 0,
-		.gpio			= GPIO_PORTE | 5,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QGVA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	},
-};
-
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		.irq		= IRQ_GPIOD(25),
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-#endif
-
-static struct platform_device *platform_devices[] __initdata = {
-	&leds_gpio,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
-
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, NULL);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* SPI and ADS7846 Touchscreen controler init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-	ads7846_dev_init();
-#endif
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835..0000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-
-static struct resource uart0[] = {
-	{
-		.start = MX2x_UART1_BASE_ADDR,
-		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART1,
-		.end = MX2x_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX2x_UART2_BASE_ADDR,
-		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART2,
-		.end = MX2x_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MX2x_UART3_BASE_ADDR,
-		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART3,
-		.end = MX2x_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = MX2x_UART4_BASE_ADDR,
-		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART4,
-		.end = MX2x_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
-	{
-		.start = MX27_UART5_BASE_ADDR,
-		.end = MX27_UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART5,
-		.end = MX27_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-static struct resource uart5[] = {
-	{
-		.start = MX27_UART6_BASE_ADDR,
-		.end = MX27_UART6_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART6,
-		.end = MX27_INT_UART6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device5 = {
-	.name = "imx-uart",
-	.id = 5,
-	.resource = uart5,
-	.num_resources = ARRAY_SIZE(uart5),
-};
-#endif
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 54d2173..c71a7bc 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -4,5 +4,28 @@
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+
+config MACH_EUKREA_CPUIMX25
+	bool "Support Eukrea CPUIMX25 Platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 10cebc5..d9e46ce 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,5 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 1550149..40c7cc4 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -109,6 +109,16 @@
 	return get_rate_per(15);
 }
 
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_per(14);
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_per(13);
+}
+
 static unsigned long get_rate_i2c(struct clk *clk)
 {
 	return get_rate_per(6);
@@ -129,9 +139,17 @@
 	return get_rate_per(7);
 }
 
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	return get_rate_per(0);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
-	return 48000000; /* FIXME */
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_upll();
+
+	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
 }
 
 static int clk_cgcr_enable(struct clk *clk)
@@ -166,14 +184,40 @@
 		.secondary	= s,			\
 	}
 
+/*
+ * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
+ * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
+ * taken from the Freescale released BSP.
+ *
+ * bit	reg	offset	clock
+ *
+ * 0	CGCR1	0	AUDMUX
+ * 12	CGCR1	12	ESAI
+ * 16	CGCR1	16	GPIO1
+ * 17	CGCR1	17	GPIO2
+ * 18	CGCR1	18	GPIO3
+ * 23	CGCR1	23	I2C1
+ * 24	CGCR1	24	I2C2
+ * 25	CGCR1	25	I2C3
+ * 27	CGCR1	27	IOMUXC
+ * 28	CGCR1	28	KPP
+ * 30	CGCR1	30	OWIRE
+ * 36	CGCR2	4	RTIC
+ * 51	CGCR2	19	WDOG
+ */
+
 DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
 DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
+DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -191,6 +235,13 @@
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
+DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
+DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
+DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
+DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
+DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk,	 0, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -217,7 +268,7 @@
 	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
 	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
 	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
@@ -225,6 +276,13 @@
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -238,9 +296,13 @@
 	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
 
-	/* Clock source for lcdc is upll */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+	/* Clock source for lcdc and csi is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
+			CRM_BASE + 0x64);
 
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
new file mode 100644
index 0000000..d86a7c3
--- /dev/null
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+#define imx25_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
+#define imx25_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
+
+#define imx25_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
+#define imx25_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
+#define imx25_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
+
+#define imx25_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
+#define imx25_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
+#define imx25_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
+#define imx25_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
+#define imx25_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+
+#define imx25_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
+
+#define imx25_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
+#define imx25_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
+#define imx25_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3a405fa..3468eb1 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -22,103 +22,6 @@
 #include <mach/mx25.h>
 #include <mach/irqs.h>
 
-static struct resource uart0[] = {
-	{
-		.start = 0x43f90000,
-		.end = 0x43f93fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 45,
-		.end = 45,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = 0x43f94000,
-		.end = 0x43f97fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 32,
-		.end = 32,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = 0x5000c000,
-		.end = 0x5000ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 18,
-		.end = 18,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = 0x50008000,
-		.end = 0x5000bfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 5,
-		.end = 5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = 0x5002c000,
-		.end = 0x5002ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 40,
-		.end = 40,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-#define MX25_OTG_BASE_ADDR 0x53FF4000
-
 static u64 otg_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_otg_resources[] = {
@@ -181,63 +84,6 @@
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = 0x43fa4000,
-	       .end = 0x43fa7fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 14,
-	       .end = 14,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
-
-static struct resource mxc_spi_resources1[] = {
-	{
-	       .start = 0x50010000,
-	       .end = 0x50013fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 13,
-	       .end = 13,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
-
-static struct resource mxc_spi_resources2[] = {
-	{
-	       .start = 0x50004000,
-	       .end = 0x50007fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 0,
-	       .end = 0,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
-
 static struct resource mxc_pwm_resources0[] = {
 	{
 		.start	= 0x53fe0000,
@@ -333,63 +179,6 @@
 	.resource = mxc_pwm_resources3,
 };
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= 0x43f80000,
-		.end	= 0x43f83fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
-
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= 0x43f98000,
-		.end	= 0x43f9bfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 4,
-		.end	= 4,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
-
-static struct resource mxc_i2c_3_resources[] = {
-	{
-		.start	= 0x43f84000,
-		.end	= 0x43f87fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 10,
-		.end	= 10,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
-	.resource = mxc_i2c_3_resources,
-};
-
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
@@ -414,7 +203,7 @@
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx25_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -439,26 +228,6 @@
 	.resource	= mx25_fec_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MX25_NFC_BASE_ADDR,
-		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_NANDFC,
-		.end	= MX25_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name		= "mxc_nand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
-	.resource	= mxc_nand_resources,
-};
-
 static struct resource mx25_rtc_resources[] = {
 	{
 		.start	= MX25_DRYICE_BASE_ADDR,
@@ -515,3 +284,83 @@
 	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
 	.resource = mxc_wdt_resources,
 };
+
+static struct resource mx25_kpp_resources[] = {
+	{
+		.start	= MX25_KPP_BASE_ADDR,
+		.end	= MX25_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_KPP,
+		.end	= MX25_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_kpp_device = {
+	.name	= "imx-keypad",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(mx25_kpp_resources),
+	.resource	= mx25_kpp_resources,
+};
+
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= MX25_SSI1_BASE_ADDR,
+		.end	= MX25_SSI1_BASE_ADDR + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX25_INT_SSI1,
+		.end	= MX25_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= MX25_SSI2_BASE_ADDR,
+		.end	= MX25_SSI2_BASE_ADDR + 0x3fff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX25_INT_SSI2,
+		.end	= MX25_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
+static struct resource mx25_csi_resources[] = {
+	{
+		.start	= MX25_CSI_BASE_ADDR,
+		.end	= MX25_CSI_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_CSI,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_csi_device = {
+	.name	= "mx2-camera",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_csi_resources),
+	.resource	= mx25_csi_resources,
+	.dev		= {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index cee12c0..4aceb68 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -1,24 +1,16 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_otg;
 extern struct platform_device otg_udc_device;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device mxc_pwm_device0;
 extern struct platform_device mxc_pwm_device1;
 extern struct platform_device mxc_pwm_device2;
 extern struct platform_device mxc_pwm_device3;
 extern struct platform_device mxc_keypad_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
-extern struct platform_device mxc_nand_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mx25_kpp_device;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 0000000..91931dc
--- /dev/null
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux-mx25.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mx25.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/ssi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+};
+
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+	{
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD5*/
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(4),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
+	);
+	mxc_audmux_v2_configure_port(4,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx25_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
new file mode 100644
index 0000000..56b2e26
--- /dev/null
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fec.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc eukrea_cpuimx25_pads[] = {
+	/* FEC - RMII */
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	/* I2C1 */
+	MX25_PAD_I2C1_CLK__I2C1_CLK,
+	MX25_PAD_I2C1_DAT__I2C1_DAT,
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+	.phy	= PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx25_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
+
+static void __init eukrea_cpuimx25_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
+			ARRAY_SIZE(eukrea_cpuimx25_pads)))
+		printk(KERN_ERR "error setting cpuimx25 pads !\n");
+
+	imx25_add_imx_uart0(&uart_pdata);
+	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+
+	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
+	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg, &otg_pdata);
+	}
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
+	eukrea_mbimxsd_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx25_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer eukrea_cpuimx25_timer = {
+	.init   = eukrea_cpuimx25_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+	/* Maintainer: Eukrea Electromatique */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = eukrea_cpuimx25_init,
+	.timer          = &eukrea_cpuimx25_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
similarity index 76%
rename from arch/arm/mach-mx25/mach-mx25pdk.c
rename to arch/arm/mach-mx25/mach-mx25_3ds.c
index 83d7410..62bc21f 100644
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -16,6 +16,12 @@
  * Boston, MA  02110-1301, USA.
  */
 
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -24,6 +30,7 @@
 #include <linux/gpio.h>
 #include <linux/fec.h>
 #include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,14 +39,14 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
-#include "devices.h"
 #include <mach/iomux-mx25.h>
 
-static struct imxuart_platform_data uart_pdata = {
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -80,6 +87,16 @@
 	MX25_PAD_LSCLK__LSCLK,
 	MX25_PAD_OE_ACD__OE_ACD,
 	MX25_PAD_CONTRAST__CONTRAST,
+
+	/* Keypad */
+	MX25_PAD_KPP_ROW0__KPP_ROW0,
+	MX25_PAD_KPP_ROW1__KPP_ROW1,
+	MX25_PAD_KPP_ROW2__KPP_ROW2,
+	MX25_PAD_KPP_ROW3__KPP_ROW3,
+	MX25_PAD_KPP_COL0__KPP_COL0,
+	MX25_PAD_KPP_COL1__KPP_COL1,
+	MX25_PAD_KPP_COL2__KPP_COL2,
+	MX25_PAD_KPP_COL3__KPP_COL3,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -103,7 +120,8 @@
 	gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
-static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 	.flash_bbt	= 1,
@@ -137,19 +155,45 @@
 	.dmacr		= 0x00020010,
 };
 
+static const uint32_t mx25pdk_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HOME),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(1, 3, KEY_VOLUMEUP),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+	KEY(3, 0, KEY_F1),
+	KEY(3, 1, KEY_F2),
+	KEY(3, 2, KEY_F3),
+	KEY(3, 3, KEY_POWER),
+};
+
+static struct matrix_keymap_data mx25pdk_keymap_data = {
+	.keymap		= mx25pdk_keymap,
+	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 			ARRAY_SIZE(mx25pdk_pads));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx25_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
 	mxc_register_device(&mx25_rtc_device, NULL);
 	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
+	mxc_register_device(&mxc_wdt, NULL);
 
 	mx25pdk_fec_reset();
 	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
 }
 
 static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
index a7e587f..bb67711 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-mx25/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -69,8 +65,11 @@
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx25_register_gpios(void);
+
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+	imx25_register_gpios();
 }
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 344753f..85beece 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -15,6 +15,8 @@
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
@@ -34,6 +36,9 @@
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -42,6 +47,7 @@
 config MACH_PCM037_EET
 	bool "Support pcm037 EET board extensions"
 	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Add support for PCM037 EET baseboard extensions. If you are using the
 	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +57,9 @@
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -58,6 +67,10 @@
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -74,6 +87,9 @@
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -82,6 +98,8 @@
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +108,7 @@
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -97,6 +116,10 @@
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -105,6 +128,9 @@
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +139,7 @@
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific
@@ -121,8 +148,34 @@
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5d650fd..2bd7bec 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,5 +22,7 @@
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
 obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 9f3e943e..d3af0fd 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -359,7 +359,7 @@
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -428,8 +428,8 @@
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "can", can1_clk)
-	_REGISTER_CLOCK(NULL, "can", can2_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
 	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK(NULL, "ect", ect_clk)
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 0000000..3b1a44a
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+#define imx31_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
+#define imx31_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
+#define imx31_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+
+#define imx31_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
+#define imx31_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
+#define imx31_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
+#define imx31_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
+#define imx31_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+
+#define imx31_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
+#define imx31_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
+#define imx31_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 0000000..f6a431a
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+#define imx35_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
+#define imx35_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+
+#define imx35_add_imx_i2c0(pdata)	\
+	imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
+#define imx35_add_imx_i2c1(pdata)	\
+	imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
+#define imx35_add_imx_i2c2(pdata)	\
+	imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+
+#define imx35_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
+#define imx35_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
+#define imx35_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+
+#define imx35_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
+#define imx35_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6..a4fd1a2 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx3_camera.h>
 
 #include "devices.h"
 
-static struct resource uart0[] = {
-	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
-	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
@@ -147,7 +49,7 @@
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -167,82 +69,6 @@
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= 0, /* runtime dependent */
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
-	{
-		.start = I2C_BASE_ADDR,
-		.end = I2C_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C,
-		.end = MXC_INT_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-	.resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
-	{
-		.start = I2C2_BASE_ADDR,
-		.end = I2C2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C2,
-		.end = MXC_INT_I2C2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-	.resource = mxc_i2c1_resources,
-};
-
-static struct resource mxc_i2c2_resources[] = {
-	{
-		.start = I2C3_BASE_ADDR,
-		.end = I2C3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C3,
-		.end = MXC_INT_I2C3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
-	.resource = mxc_i2c2_resources,
-};
-
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
@@ -455,68 +281,7 @@
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-/*
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_1_resources[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_2_resources[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-	.resource = mxc_spi_0_resources,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-	.resource = mxc_spi_1_resources,
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-	.resource = mxc_spi_2_resources,
-};
-
-#ifdef CONFIG_ARCH_MX35
+#if defined(CONFIG_ARCH_MX35)
 static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
@@ -628,16 +393,15 @@
 
 static int __init mx3_devices_init(void)
 {
+#if defined(CONFIG_ARCH_MX31)
 	if (cpu_is_mx31()) {
-		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
 		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
+#endif
+#if defined(CONFIG_ARCH_MX35)
 	if (cpu_is_mx35()) {
-		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -653,6 +417,7 @@
 		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c864..e553523 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
@@ -20,9 +10,6 @@
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 0000000..1dc5004
--- /dev/null
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO_QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CMO_QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	/* Backlight */
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD_PWR */
+	MX35_PAD_D3_CLS__GPIO1_4,
+	/* LED */
+	MX35_PAD_LD23__GPIO3_29,
+	/* SWITCH */
+	MX35_PAD_LD19__GPIO3_25,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* I2S */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define GPIO_LED1	(2 * 32 + 29)
+#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LCDPWR	(4)
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx35 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD4 */
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(3),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
+	);
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx35_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec9..96aadca 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "crm_regs.h"
 
@@ -301,7 +299,8 @@
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 };
@@ -493,13 +492,12 @@
 };
 
 /* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&mxc_i2c_device1,
 	&armadillo5x0_button_device,
 };
 
@@ -512,10 +510,11 @@
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	/* SMSC9118 IRQ pin */
 	gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@
 			    &armadillo5x0_nor_flash_pdata);
 
 	/* Register NAND Flash */
-	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
new file mode 100644
index 0000000..63f970f
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx35_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+#define TSC2007_IRQGPIO		(2 * 32 + 2)
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(TSC2007_IRQGPIO);
+	gpio_request(TSC2007_IRQGPIO, NULL);
+	gpio_direction_input(TSC2007_IRQGPIO);
+
+	val = gpio_get_value(TSC2007_IRQGPIO);
+
+	gpio_free(TSC2007_IRQGPIO);
+	gpio_request(TSC2007_IRQGPIO, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(TSC2007_IRQGPIO, NULL);
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+	&imx_wdt_device0,
+};
+
+static struct pad_desc eukrea_cpuimx35_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* TSC2007 IRQ */
+	MX35_PAD_ATA_DA2__GPIO3_2,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx35_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx35_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
+			ARRAY_SIZE(eukrea_cpuimx35_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
+	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
+	eukrea_mbimxsd_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx35_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer eukrea_cpuimx35_timer = {
+	.init	= eukrea_cpuimx35_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+	/* Maintainer: Eukrea Electromatique */
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &eukrea_cpuimx35_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d..5b23e41 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -37,13 +33,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/memory.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (					\
@@ -51,6 +46,23 @@
 	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
 	MX31_IO_ADDRESS(x))
 
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init kzm_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 }
 #else
 static inline void kzm_init_imx_uart(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 58e5729..6fe69e1 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -22,7 +18,6 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
@@ -37,19 +32,47 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
@@ -145,7 +168,7 @@
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi1_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
@@ -165,7 +188,8 @@
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -182,8 +206,10 @@
 
 #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
 
-static void mx31_3ds_usbotg_init(void)
+static int mx31_3ds_usbotg_init(void)
 {
+	int err;
+
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
@@ -197,10 +223,25 @@
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
-	gpio_request(USBOTG_RST_B, "otgusb-reset");
-	gpio_direction_output(USBOTG_RST_B, 0);
+	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
+	if (err) {
+		pr_err("Failed to request the USB OTG reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBOTG_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB OTG reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
 	mdelay(1);
 	gpio_set_value(USBOTG_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBOTG_RST_B);
+	return err;
 }
 
 static struct fsl_usb2_platform_data usbotg_pdata = {
@@ -208,178 +249,16 @@
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
- * Support for the SMSC9217 on the Debug board.
- */
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= LAN9217_BASE_ADDR,
-		.end		= LAN9217_BASE_ADDR + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= EXPIO_INT_ENET,
-		.end		= EXPIO_INT_ENET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * Routines for the CPLD on the debug board. It contains a CPLD handling
- * LEDs, switches, interrupts for Ethernet.
- */
-
-static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
-{
-	uint32_t imr_val;
-	uint32_t int_valid;
-	uint32_t expio_irq;
-
-	imr_val = __raw_readw(CPLD_INT_MASK_REG);
-	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
- */
-static void expio_mask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* mask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg |= 1 << expio;
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
- */
-static void expio_ack_irq(uint32_t irq)
-{
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	/* mask the interrupt */
-	expio_mask_irq(irq);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
- */
-static void expio_unmask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* unmask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg &= ~(1 << expio);
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.ack = expio_ack_irq,
-	.mask = expio_mask_irq,
-	.unmask = expio_unmask_irq,
-};
-
-static int __init mx31_3ds_init_expio(void)
-{
-	int i;
-	int ret;
-
-	/* Check if there's a debug board connected */
-	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
-		/* No Debug board found */
-		return -ENODEV;
-	}
-
-	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
-		__raw_readw(CPLD_CODE_VER_REG));
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/* Disable the interrupts and clear the status */
-	__raw_writew(0, CPLD_INT_MASK_REG);
-	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	__raw_writew(0x1F, CPLD_INT_MASK_REG);
-	for (i = MXC_EXP_IO_BASE;
-	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		set_irq_chip(i, &expio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
-
-	return 0;
-}
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31_3ds_io_desc[] __initdata = {
-	{
-		.virtual = MX31_CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
-		.length = MX31_CS5_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-/*
  * Set up static virtual mappings.
  */
 static void __init mx31_3ds_map_io(void)
 {
 	mx31_map_io();
-	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
 }
 
 /*!
@@ -390,10 +269,10 @@
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
@@ -402,8 +281,9 @@
 	mx31_3ds_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
 
-	if (!mx31_3ds_init_expio())
-		platform_device_register(&smsc911x_device);
+	if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
 }
 
 static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a18..94b3e7c 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -33,8 +29,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,45 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +123,7 @@
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -112,7 +137,7 @@
 static inline void mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -475,7 +500,7 @@
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
 
-	mxc_register_device(&mxc_i2c_device1, NULL);
+	imx31_add_imx_i2c1(NULL);
 }
 #else
 static void mxc_init_i2c(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index d3d5877..8f66f65 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -46,10 +42,10 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -115,6 +111,8 @@
 
 /* USB */
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -244,10 +242,20 @@
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
+static void lilly1131_usb_init(void)
+{
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
 
 /* SPI */
 
@@ -257,12 +265,12 @@
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -277,6 +285,12 @@
 	.bus_num	= 1,
 	.chip_select	= 0,
 	.platform_data	= &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
 };
 
 static int mx31lilly_baseboard;
@@ -314,20 +328,14 @@
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	lilly1131_usb_init();
 }
 
 static void __init mx31lilly_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d114..da236c4 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -42,14 +38,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -69,7 +63,8 @@
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -112,7 +107,7 @@
 	MXC_SPI_CS(0),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -253,9 +248,9 @@
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
-	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
 #if defined(CONFIG_USB_ULPI)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 62b5e40..67776bc 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -42,16 +38,15 @@
 #include <mach/board-mx31moboard.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@
 
 static int moboard_uart0_init(struct platform_device *pdev)
 {
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	return 0;
+	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	if (ret)
+		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+	return ret;
 }
 
-static struct imxuart_platform_data uart0_pdata = {
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+}
+
+static const struct imxuart_platform_data uart0_pdata __initconst = {
 	.init = moboard_uart0_init,
+	.exit = moboard_uart0_exit,
 };
 
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
 	.bitrate = 400000,
 };
 
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -156,7 +163,7 @@
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 	.chipselect	= moboard_spi1_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
 };
@@ -286,7 +293,7 @@
 	MXC_SPI_CS(1),
 };
 
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
 	.chipselect	= moboard_spi2_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
 };
@@ -499,15 +506,14 @@
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+	imx31_add_imx_uart0(&uart0_pdata);
+	imx31_add_imx_uart4(&uart4_pdata);
 
-	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+	imx31_add_imx_i2c0(&moboard_i2c0_data);
+	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
-	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
-
-	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
-	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+	imx31_add_spi_imx1(&moboard_spi1_pdata);
+	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
similarity index 89%
rename from arch/arm/mach-mx3/mach-mx35pdk.c
rename to arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d..1c30d72 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -12,10 +12,12 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
  */
 
 #include <linux/types.h>
@@ -32,12 +34,12 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -90,7 +92,7 @@
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx35_add_imx_uart0(&uart_pdata);
 
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index cce4106..8a292dd 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -43,20 +39,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "pcm037.h"
 
@@ -225,7 +218,7 @@
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -279,16 +272,17 @@
 	.resource = &pcm038_sram_resource,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
 	.bitrate = 20000,
 };
 
@@ -545,6 +539,7 @@
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -554,6 +549,7 @@
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -581,7 +577,6 @@
 static void __init mxc_board_init(void)
 {
 	int ret;
-	u32 tmp;
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
@@ -614,9 +609,10 @@
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
@@ -634,10 +630,10 @@
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+	imx31_add_imx_i2c1(&pcm037_i2c1_data);
+	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d38600..c8b9821 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,9 +13,6 @@
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
 #include <mach/iomux-mx3.h>
 
 #include <asm/mach-types.h>
@@ -64,7 +61,7 @@
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
@@ -184,7 +181,7 @@
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+	imx35_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 78d9185..47f5311 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -40,19 +36,15 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +114,12 @@
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
 
@@ -222,6 +214,9 @@
 	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
 };
 
 #define AC97_GPIO_TXFS	(1 * 32 + 31)
@@ -304,11 +299,13 @@
 	.flags = IMX_SSI_USE_AC97,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -319,6 +316,7 @@
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -361,17 +359,17 @@
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx35_add_imx_uart1(&uart_pdata);
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 #endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -390,6 +388,7 @@
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
+	imx35_add_flexcan1(NULL);
 }
 
 static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b83..d44ac70 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -34,9 +30,9 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
 /* FPGA defines */
@@ -62,7 +58,7 @@
  * This file contains the board-specific initialization routines.
  */
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -73,11 +69,11 @@
 	MX31_PIN_RXD1__RXD1
 };
 
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
 			"uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 
 static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@
 
 static struct resource qong_flash_resource = {
 	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f..20e48c0 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -97,9 +93,12 @@
 }
 #endif
 
+int imx3x_register_gpios(void);
+
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	imx3x_register_gpios();
 }
 
 void __init mx35_init_irq(void)
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74..827fd3c 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -36,13 +32,13 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -96,7 +92,7 @@
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -217,9 +213,9 @@
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfb..7b0e74e 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -37,12 +33,11 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
-#include <mach/spi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -76,7 +71,7 @@
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -161,7 +156,7 @@
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -201,9 +196,9 @@
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	mxc_register_device(&imx_wdt_device0, NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299c..fc395a7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -27,13 +23,13 @@
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -230,7 +226,7 @@
 	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
 		"devboard");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c..0551eb3 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6..40c3e75 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -30,7 +26,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
 #include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -183,8 +179,7 @@
 	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
 		"smartbot");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
+	imx31_add_imx_uart1(&uart_pdata);
 
 	switch (board) {
 	case MX31SMARTBOT:
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 1576d51..0848db5 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -15,4 +15,31 @@
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index bf23f86..86c66e7 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,4 +6,6 @@
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-
+obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
new file mode 100644
index 0000000..623607a
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define CPUIMX51_USBH1_STP	(0*32 + 27)
+#define CPUIMX51_QUARTA_GPIO	(2*32 + 28)
+#define CPUIMX51_QUARTB_GPIO	(2*32 + 25)
+#define CPUIMX51_QUARTC_GPIO	(2*32 + 26)
+#define CPUIMX51_QUARTD_GPIO	(2*32 + 27)
+#define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
+#define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
+#define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
+#define CPUIMX51_QUARTD_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
+#define CPUIMX51_QUART_XTAL	14745600
+#define CPUIMX51_QUART_REGSHIFT	17
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
+		.irq = CPUIMX51_QUARTA_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
+		.irq = CPUIMX51_QUARTB_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
+		.irq = CPUIMX51_QUARTC_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
+		.irq = CPUIMX51_QUARTD_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	&serial_device,
+#endif
+};
+
+static struct pad_desc eukrea_cpuimx51_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* I2C2 */
+	MX51_PAD_GPIO_1_2__I2C2_SCL,
+	MX51_PAD_GPIO_1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* QUART IRQ */
+	MX51_PAD_NANDF_D15__GPIO_3_25,
+	MX51_PAD_NANDF_D14__GPIO_3_26,
+	MX51_PAD_NANDF_D13__GPIO_3_27,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx51_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
+					ARRAY_SIZE(eukrea_cpuimx51_pads));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
+	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
+	gpio_free(CPUIMX51_QUARTA_GPIO);
+	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
+	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
+	gpio_free(CPUIMX51_QUARTB_GPIO);
+	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
+	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
+	gpio_free(CPUIMX51_QUARTC_GPIO);
+	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
+	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
+	gpio_free(CPUIMX51_QUARTD_GPIO);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data);
+	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
+	eukrea_mbimx51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
new file mode 100644
index 0000000..f95c2fd
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx51.h>
+#include <mach/imx-uart.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+
+static struct pad_desc mx51_3ds_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	MX51_PAD_EIM_D25__UART2_CTS,
+	MX51_PAD_EIM_D26__UART2_RTS,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_EIM_D24__UART3_CTS,
+	MX51_PAD_EIM_D27__UART3_RTS,
+
+	/* CPLD PARENT IRQ PIN */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+	MX51_PAD_KEY_COL4__KEY_COL4,
+	MX51_PAD_KEY_COL5__KEY_COL5,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
+static int mx51_3ds_board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F1),
+	KEY(0, 4, KEY_UP),
+	KEY(0, 5, KEY_F2),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+	KEY(1, 4, KEY_SELECT),
+	KEY(1, 5, KEY_RIGHT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_F3),
+	KEY(2, 4, KEY_DOWN),
+	KEY(2, 5, KEY_F4),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_OK),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+	KEY(3, 4, KEY_MENU),
+	KEY(3, 5, KEY_BACK)
+};
+
+static struct matrix_keymap_data mx51_3ds_map_data = {
+	.keymap		= mx51_3ds_board_keymap,
+	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
+};
+
+static void mxc_init_keypad(void)
+{
+	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+}
+#else
+static inline void mxc_init_keypad(void)
+{
+}
+#endif
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
+					ARRAY_SIZE(mx51_3ds_pads));
+	mxc_init_imx_uart();
+
+	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
+
+	mxc_init_keypad();
+}
+
+static void __init mx51_3ds_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_3ds_timer_init,
+};
+
+MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index ed885f9..6e384d9 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -12,6 +12,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -21,6 +22,7 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
 #include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
@@ -64,6 +66,18 @@
 	MX51_PAD_EIM_D27__UART3_RTS,
 	MX51_PAD_EIM_D24__UART3_CTS,
 
+	/* I2C1 */
+	MX51_PAD_EIM_D16__I2C1_SDA,
+	MX51_PAD_EIM_D19__I2C1_SCL,
+
+	/* I2C2 */
+	MX51_PAD_KEY_COL4__I2C2_SCL,
+	MX51_PAD_KEY_COL5__I2C2_SDA,
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__HSI2C_CLK,
+	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
 	MX51_PAD_USBH1_DIR__USBH1_DIR,
@@ -78,7 +92,7 @@
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO1_7,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
 };
 
 /* Serial ports */
@@ -99,6 +113,14 @@
 }
 #endif /* SERIAL_IMX */
 
+static struct imxi2c_platform_data babbage_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct imxi2c_platform_data babbage_hsi2c_data = {
+	.bitrate = 400000,
+};
+
 static int gpio_usbh1_active(void)
 {
 	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
@@ -230,6 +252,10 @@
 	mxc_init_imx_uart();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data);
+	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+
 	if (otg_mode_host)
 		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
 	else {
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index d9f612d..6af69de 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -758,6 +758,10 @@
 	.parent = &ckil_clk,
 };
 
+static struct clk kpp_clk = {
+	.id = 0,
+};
+
 #define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
@@ -798,6 +802,14 @@
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
+/* I2C */
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
@@ -815,12 +827,16 @@
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 7130449..1920ff4 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -93,6 +93,64 @@
 	.resource = mxc_fec_resources,
 };
 
+static struct resource mxc_i2c0_resources[] = {
+	{
+		.start = MX51_I2C1_BASE_ADDR,
+		.end = MX51_I2C1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C1,
+		.end = MX51_MXC_INT_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+	.resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+	{
+		.start = MX51_I2C2_BASE_ADDR,
+		.end = MX51_I2C2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_I2C2,
+		.end = MX51_MXC_INT_I2C2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+	.resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_hsi2c_resources[] = {
+	{
+		.start = MX51_HSI2C_DMA_BASE_ADDR,
+		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_HS_I2C,
+		.end = MX51_MXC_INT_HS_I2C,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_hsi2c_device = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
+	.resource = mxc_hsi2c_resources
+};
+
 static u64 usb_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource usbotg_resources[] = {
@@ -168,34 +226,57 @@
 	.resource = mxc_wdt_resources,
 };
 
+static struct resource mxc_kpp_resources[] = {
+	{
+		.start = MX51_MXC_INT_KPP,
+		.end = MX51_MXC_INT_KPP,
+		.flags = IORESOURCE_IRQ,
+	} , {
+		.start = MX51_KPP_BASE_ADDR,
+		.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "imx-keypad",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_kpp_resources),
+	.resource = mxc_kpp_resources,
+};
+
 static struct mxc_gpio_port mxc_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
 		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START
 	},
 	{
 		.chip.label = "gpio-1",
 		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
 	},
 	{
 		.chip.label = "gpio-2",
 		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
 	},
 	{
 		.chip.label = "gpio-3",
 		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index c879ae7..e509cfa 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -6,3 +6,7 @@
 extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_hsi2c_device;
+extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
new file mode 100644
index 0000000..ffa93d1
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -0,0 +1,200 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/leds.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+#define MBIMX51_TSC2007_GPIO	(2*32 + 30)
+#define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
+#define MBIMX51_LED0		(2*32 + 5)
+#define MBIMX51_LED1		(2*32 + 6)
+#define MBIMX51_LED2		(2*32 + 7)
+#define MBIMX51_LED3		(2*32 + 8)
+
+static struct gpio_led mbimx51_leds[] = {
+	{
+		.name			= "led0",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED0,
+	},
+	{
+		.name			= "led1",
+		.default_trigger	= "nand-disk",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED1,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED2,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "default-on",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED3,
+	},
+};
+
+static struct gpio_led_platform_data mbimx51_leds_info = {
+	.leds		= mbimx51_leds,
+	.num_leds	= ARRAY_SIZE(mbimx51_leds),
+};
+
+static struct platform_device mbimx51_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mbimx51_leds_info,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mbimx51_leds_gpio,
+};
+
+static struct pad_desc mbimx51_pads[] = {
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+
+	/* TSC2007 IRQ */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* LEDS */
+	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mbimx51_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_UP),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_RIGHT),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+};
+
+static struct matrix_keymap_data mbimx51_map_data = {
+	.keymap		= mbimx51_keymap,
+	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
+};
+
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
+}
+
+struct tsc2007_platform_data tsc2007_data = {
+	.model = 2007,
+	.x_plate_ohms = 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
+};
+
+static struct i2c_board_info mbimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.irq  = MBIMX51_TSC2007_IRQ,
+		.platform_data = &tsc2007_data,
+	},
+};
+
+/*
+ * baseboard initialization.
+ */
+void __init eukrea_mbimx51_baseboard_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
+					ARRAY_SIZE(mbimx51_pads));
+
+	mxc_register_device(&mxc_uart_device1, NULL);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+	gpio_request(MBIMX51_LED0, "LED0");
+	gpio_direction_output(MBIMX51_LED0, 1);
+	gpio_free(MBIMX51_LED0);
+	gpio_request(MBIMX51_LED1, "LED1");
+	gpio_direction_output(MBIMX51_LED1, 1);
+	gpio_free(MBIMX51_LED1);
+	gpio_request(MBIMX51_LED2, "LED2");
+	gpio_direction_output(MBIMX51_LED2, 1);
+	gpio_free(MBIMX51_LED2);
+	gpio_request(MBIMX51_LED3, "LED3");
+	gpio_direction_output(MBIMX51_LED3, 1);
+	gpio_free(MBIMX51_LED3);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+
+	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
+	gpio_direction_input(MBIMX51_TSC2007_GPIO);
+	set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+	i2c_register_board_info(1, mbimx51_i2c_devices,
+				ARRAY_SIZE(mbimx51_i2c_devices));
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef..bc3f30d 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx51_register_gpios(void);
+
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -80,4 +82,5 @@
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
+	imx51_register_gpios();
 }
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
index ce4f590..b989bac 100644
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -11,11 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
index 353bd97..027af4f 100644
--- a/arch/arm/mach-mxc91231/devices.c
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -135,7 +135,7 @@
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init mxc91231_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 6becda3..aeccfd75 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -15,11 +15,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/mm.h>
@@ -88,7 +83,10 @@
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int mxc91231_register_gpios(void);
+
 void __init mxc91231_init_irq(void)
 {
+	mxc91231_register_gpios();
 	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 2c471fc..89f793a 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,7 +32,10 @@
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+	.rate = 2400000,
+};
+
 static struct clk clk_48 = {
 	.rate = 48 * 1000 * 1000,
 };
@@ -50,6 +53,12 @@
 	}
 
 static struct clk_lookup lookups[] = {
+	{
+		.con_id		= "apb_pclk",
+		.clk		= &clk_default,
+	},
+	CLK(&clk_24, "mtu0"),
+	CLK(&clk_24, "mtu1"),
 	CLK(&clk_48, "uart0"),
 	CLK(&clk_48, "uart1"),
 	CLK(&clk_default, "gpio.0"),
@@ -59,10 +68,8 @@
 	CLK(&clk_default, "rng"),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 5563985..78da2e7c 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,3 +11,5 @@
 struct clk {
 	unsigned long		rate;
 };
+
+int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 91c3c90..ac58e3b 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -31,6 +31,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "clock.h"
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -143,6 +145,12 @@
 	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 /*
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 0859336..5c934bd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 1b12d32..770a68c 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -20,50 +20,49 @@
 	/* nothing */
 }
 
+static int timeout;
+
 static void putc_ns9360(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
+	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fdd1dd5..0a9d61d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -301,6 +301,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= ams_delta_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed..059bac6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -378,6 +378,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e1195a3..7a65684 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -98,6 +98,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d1100e4..68b2bed 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -467,6 +467,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index a53ab82..0b0825f 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -437,6 +437,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 8e313b4..d70a4f0 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -304,6 +304,7 @@
 	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
+	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 5d12fd3..91064b3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -463,6 +463,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 71e1a3f..8c28b10f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -400,6 +400,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_nokia770_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 80d8620..e2a72af 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -584,6 +584,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= osk_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 569b4c9..61a2321 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -373,6 +373,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmte_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 6ad49a2..21c01c6 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,6 +321,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmtt_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 6641de9..f324924 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -338,10 +338,12 @@
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.phys_io = 0xfff00000,
-	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
-	.boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
-	.init_irq = omap_palmz71_init_irq,
-	.init_machine = omap_palmz71_init,
-	.timer = &omap_timer,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmz71_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_palmz71_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d57..8b5ab1f 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -339,6 +339,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2fb1e5f..995566b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -423,7 +423,8 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_sx1_map_io,
-	.init_irq		= omap_sx1_init_irq,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 87b9436..4c483dc 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -287,6 +287,7 @@
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= voiceblue_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d9b8d82..0ce3fec 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,7 +22,6 @@
 
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
-extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -122,7 +121,6 @@
 #endif
 
 	omap_sram_init();
-	omapfb_reserve_sdram();
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a11a575..42f49f7 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -248,6 +248,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_2430sdp_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index f474a80..dd9c031 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -815,6 +815,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 504d2bd..57290fb 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -108,6 +108,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e4a5d66..4bb2c5d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -402,6 +402,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_4430sdp_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index af383a8..7da92de 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -472,6 +472,7 @@
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= am3517_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index aa69fb9..bd75642 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -346,6 +346,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_apollon_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2c..bc4c3f8 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -837,6 +837,7 @@
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= cm_t35_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b5..922b746 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -825,6 +825,7 @@
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= devkit8000_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 16cc068..9242902 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -59,6 +59,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0665f2c..16703fd 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -378,6 +378,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d55c57b..759e39d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -543,6 +543,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= igep2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index fefd7e6..9cd2669 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -417,6 +417,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3ccc34e..2565ff0 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -667,6 +667,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -677,6 +678,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -687,6 +689,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 69b154c..0ab0c26 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -519,6 +519,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b952610..a3d2e28 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -727,6 +727,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index db06dc9..c0f4f12 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -601,6 +601,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f848ba8db..a04cffd 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -538,9 +538,7 @@
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2f5f823..f05b867 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -571,6 +571,7 @@
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_touchbook_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac414..87acb2f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -495,6 +495,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321..0348392 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -175,6 +175,10 @@
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -182,6 +186,7 @@
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -190,6 +195,7 @@
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -197,6 +203,8 @@
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -205,20 +213,23 @@
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1b86b5b..3bd956f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -154,6 +154,7 @@
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= rx51_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 803ef14c..ffe188c 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -95,6 +95,7 @@
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 3314704..5b605eb 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -77,6 +77,7 @@
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 41b155a..d337441 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3166,6 +3166,10 @@
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.ops		= &clkops_null,
+};
 
 /*
  * clkdev
@@ -3173,6 +3177,7 @@
 
 /* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
+	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
 	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
 	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 0280422..e10db7a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1369,6 +1369,7 @@
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1379,6 +1380,7 @@
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3cfb425..4e1f53d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/vram.h>
 
 #include "clock2xxx.h"
 #include "clock3xxx.h"
@@ -241,8 +240,6 @@
 
 	omap2_check_revision();
 	omap_sram_init();
-	omapfb_reserve_sdram();
-	omap_vram_reserve_sdram();
 }
 
 #ifdef CONFIG_ARCH_OMAP2420
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 95c9a5f..b7a4133 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -409,10 +409,11 @@
 		return 0;
 
 	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk)
+	if (!oh->_clk) {
 		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			   oh->name, oh->main_clk);
 		return -EINVAL;
+	}
 
 	if (!oh->_clk->clkdm)
 		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
@@ -444,10 +445,11 @@
 			continue;
 
 		c = omap_clk_get_by_name(os->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -470,10 +472,11 @@
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = omap_clk_get_by_name(oc->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2e96771..b88737f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,7 +99,7 @@
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
 			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
@@ -108,7 +108,7 @@
 				return;
 			}
 			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKST);
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index c68f799..d72d1ac 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 905719a..c897e03 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -26,6 +26,7 @@
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
+	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index fe0de16..a47100d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -3,6 +3,10 @@
  *
  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
+ * Support for HW Rev C1:
+ *
+ * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU Lesser General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -23,6 +27,8 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -31,6 +37,7 @@
 #include "common.h"
 #include "mpp.h"
 
+/* Rev A1 and B1 */
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
@@ -42,6 +49,23 @@
 #define DNS323_GPIO_KEY_POWER		9
 #define DNS323_GPIO_KEY_RESET		10
 
+/* Rev C1 */
+#define DNS323C_GPIO_KEY_POWER		1
+#define DNS323C_GPIO_POWER_OFF		2
+#define DNS323C_GPIO_LED_RIGHT_AMBER	8
+#define DNS323C_GPIO_LED_LEFT_AMBER	9
+#define DNS323C_GPIO_LED_POWER		17
+#define DNS323C_GPIO_FAN_BIT1		18
+#define DNS323C_GPIO_FAN_BIT0		19
+
+/* Exposed to userspace, do not change */
+enum {
+	DNS323_REV_A1,	/* 0 */
+	DNS323_REV_B1,	/* 1 */
+	DNS323_REV_C1,	/* 2 */
+};
+
+
 /****************************************************************************
  * PCI setup
  */
@@ -68,21 +92,12 @@
 	.map_irq	= dns323_pci_map_irq,
 };
 
-static int __init dns323_dev_id(void)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-
-	return dev;
-}
-
 static int __init dns323_pci_init(void)
 {
-	/* The 5182 doesn't really use its PCI bus, and initialising PCI
+	/* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
 	 * gets in the way of initialising the SATA controller.
 	 */
-	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
+	if (machine_is_dns323() && system_rev == DNS323_REV_A1)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -221,7 +236,7 @@
 	}
 
 	iounmap(mac_page);
-	printk("DNS323: Found ethernet MAC address: ");
+	printk("DNS-323: Found ethernet MAC address: ");
 	for (i = 0; i < 6; i++)
 		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
 
@@ -259,12 +274,11 @@
 	return 0;
 }
 
-static struct gpio_led dns323_leds[] = {
+static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
-		.default_trigger = "timer",
-		.active_low = 1,
+		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -276,9 +290,34 @@
 	},
 };
 
-static struct gpio_led_platform_data dns323_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323_leds),
-	.leds		= dns323_leds,
+
+static struct gpio_led dns323c_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = DNS323C_GPIO_LED_POWER,
+		.default_trigger = "timer",
+		.active_low = 1,
+	}, {
+		.name = "right:amber",
+		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
+		.active_low = 1,
+	}, {
+		.name = "left:amber",
+		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
+		.active_low = 1,
+	},
+};
+
+
+static struct gpio_led_platform_data dns323ab_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323ab_leds),
+	.leds		= dns323ab_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
+};
+
+static struct gpio_led_platform_data dns323c_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323c_leds),
+	.leds		= dns323c_leds,
 	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
@@ -286,7 +325,7 @@
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &dns323_led_data,
+		.platform_data	= &dns323ab_led_data,
 	},
 };
 
@@ -294,7 +333,7 @@
  * GPIO Attached Keys
  */
 
-static struct gpio_keys_button dns323_buttons[] = {
+static struct gpio_keys_button dns323ab_buttons[] = {
 	{
 		.code		= KEY_RESTART,
 		.gpio		= DNS323_GPIO_KEY_RESET,
@@ -308,9 +347,23 @@
 	},
 };
 
-static struct gpio_keys_platform_data dns323_button_data = {
-	.buttons	= dns323_buttons,
-	.nbuttons	= ARRAY_SIZE(dns323_buttons),
+static struct gpio_keys_platform_data dns323ab_button_data = {
+	.buttons	= dns323ab_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323ab_buttons),
+};
+
+static struct gpio_keys_button dns323c_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= DNS323C_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dns323c_button_data = {
+	.buttons	= dns323c_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323c_buttons),
 };
 
 static struct platform_device dns323_button_device = {
@@ -318,7 +371,7 @@
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
-		.platform_data	= &dns323_button_data,
+		.platform_data	= &dns323ab_button_data,
 	},
 };
 
@@ -332,7 +385,7 @@
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -356,7 +409,7 @@
 	{ -1 },
 };
 
-static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -380,15 +433,57 @@
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* ? input */
+	{  1, MPP_GPIO },		/* input power switch (0 = pressed) */
+	{  2, MPP_GPIO },		/* output power off */
+	{  3, MPP_UNUSED },		/* ? output */
+	{  4, MPP_UNUSED },		/* ? output */
+	{  5, MPP_UNUSED },		/* ? output */
+	{  6, MPP_UNUSED },		/* ? output */
+	{  7, MPP_UNUSED },		/* ? output */
+	{  8, MPP_GPIO },		/* i/o right amber LED */
+	{  9, MPP_GPIO },		/* i/o left amber LED */
+	{ 10, MPP_GPIO },		/* input */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO },		/* power button LED */
+	{ 18, MPP_GPIO },		/* fan speed bit 0 */
+	{ 19, MPP_GPIO },		/* fan speed bit 1 */
+	{ -1 },
+};
+
+/* Rev C1 Fan speed notes:
+ *
+ * The fan is controlled by 2 GPIOs on this board. The settings
+ * of the bits is as follow:
+ *
+ *  GPIO 18    GPIO 19    Fan
+ *
+ *    0          0        stopped
+ *    0          1        low speed
+ *    1          0        high speed
+ *    1          1        don't do that (*)
+ *
+ * (*) I think the two bits control two feed-in resistors into a fixed
+ *     PWN circuit, setting both bits will basically go a 'bit' faster
+ *     than high speed, but d-link doesn't do it and you may get out of
+ *     HW spec so don't do it.
+ */
+
 /*
- * On the DNS-323 the following devices are attached via I2C:
+ * On the DNS-323 A1 and B1 the following devices are attached via I2C:
  *
  *  i2c addr | chip        | description
  *  0x3e     | GMT G760Af  | fan speed PWM controller
  *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
  *  0x68     | ST M41T80   | RTC w/ alarm
  */
-static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
 	}, {
@@ -398,36 +493,140 @@
 	},
 };
 
+/*
+ * On the DNS-323 C1 the following devices are attached via I2C:
+ *
+ *  i2c addr | chip        | description
+ *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ *  0x68     | ST M41T80   | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41t80", 0x68),
+	},
+};
+
 /* DNS-323 rev. A specific power off method */
 static void dns323a_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
 /* DNS-323 rev B specific power off method */
 static void dns323b_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 	mdelay(100);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
 }
 
+/* DNS-323 rev. C specific power off method */
+static void dns323c_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
+}
+
+static int dns323c_phy_fixup(struct phy_device *phy)
+{
+	phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
+
+	return 0;
+}
+
+static int __init dns323_identify_rev(void)
+{
+	u32 dev, rev, i, reg;
+
+	pr_debug("DNS-323: Identifying board ... \n");
+
+	/* Rev A1 has a 5181 */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5181_DEV_ID) {
+		pr_debug("DNS-323: 5181 found, board is A1\n");
+		return DNS323_REV_A1;
+	}
+	pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
+
+	/* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
+	 * a bit gross but we want to do that without links into the eth
+	 * driver so let's poke at it directly. We default to rev B1 in
+	 * case the accesses fail
+	 */
+
+#define ETH_SMI_REG		(ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
+#define  SMI_BUSY		0x10000000
+#define  SMI_READ_VALID		0x08000000
+#define  SMI_OPCODE_READ	0x04000000
+#define  SMI_OPCODE_WRITE	0x00000000
+
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (!(reg & SMI_BUSY))
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	writel((3 << 21)	/* phy ID reg */ |
+	       (8 << 16)	/* phy addr */ |
+	       SMI_OPCODE_READ, ETH_SMI_REG);
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (reg & SMI_READ_VALID)
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
+
+	/* Note: the Marvell tools mask the ID with 0x3f0 before comparison
+	 * but I don't see that making a difference here, at least with
+	 * any known Marvell PHY ID
+	 */
+	switch(reg & 0xfff0) {
+	case 0x0cc0: /* MV88E1111 */
+		return DNS323_REV_B1;
+	case 0x0e10: /* MV88E1118 */
+		return DNS323_REV_C1;
+	default:
+		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+			   reg & 0xffff);
+	}
+	return DNS323_REV_B1;
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
+	/* Identify revision */
+	system_rev = dns323_identify_rev();
+	pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
+
 	/* Just to be tricky, the 5182 has a completely different
 	 * set of MPP modes to the 5181.
 	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
-	else {
-		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		orion5x_mpp_conf(dns323a_mpp_modes);
 		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+		break;
+	case DNS323_REV_B1:
+		orion5x_mpp_conf(dns323b_mpp_modes);
+		break;
+	case DNS323_REV_C1:
+		orion5x_mpp_conf(dns323c_mpp_modes);
+		break;
 	}
 
 	/* setup flash mapping
@@ -436,53 +635,96 @@
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
-	/* The 5181 power LED is active low and requires
-	 * DNS323_GPIO_LED_POWER1 to also be low.
-	 */
-	if (dns323_dev_id() == MV88F5181_DEV_ID) {
-		dns323_leds[0].active_low = 1;
-		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
-		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	/* Sort out LEDs, Buttons and i2c devices */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* The 5181 power LED is active low and requires
+		 * DNS323_GPIO_LED_POWER1 to also be low.
+		 */
+		 dns323ab_leds[0].active_low = 1;
+		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+		/* Fall through */
+	case DNS323_REV_B1:
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+				ARRAY_SIZE(dns323ab_i2c_devices));
+		break;
+	case DNS323_REV_C1:
+		/* Hookup LEDs & Buttons */
+		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
+		dns323_button_device.dev.platform_data = &dns323c_button_data;
+
+		/* Hookup i2c devices and fan driver */
+		i2c_register_board_info(0, dns323c_i2c_devices,
+				ARRAY_SIZE(dns323c_i2c_devices));
+		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
+
+		/* Register fixup for the PHY LEDs */
+		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
+					   MARVELL_PHY_ID_MASK,
+					   dns323c_phy_fixup);
 	}
 
 	platform_device_register(&dns323_gpio_leds);
-
 	platform_device_register(&dns323_button_device);
 
-	i2c_register_board_info(0, dns323_i2c_devices,
-				ARRAY_SIZE(dns323_i2c_devices));
-
 	/*
 	 * Configure peripherals.
 	 */
 	if (dns323_read_mac_addr() < 0)
-		printk("DNS323: Failed to read MAC address\n");
-
+		printk("DNS-323: Failed to read MAC address\n");
 	orion5x_ehci0_init();
 	orion5x_eth_init(&dns323_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	/* The 5182 has its SATA controller on-chip, and needs its own little
-	 * init routine.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+	/* Remaining GPIOs */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_B1:
+		/* 5182 built-in SATA init */
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* The 5182 has flag to indicate the system is up. Without this flag
-	 * set, power LED will flash and cannot be controlled via leds-gpio.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+		/* The DNS323 rev B1 has flag to indicate the system is up.
+		 * Without this flag set, power LED will flash and cannot be
+		 * controlled via leds-gpio.
+		 */
+		if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
+			gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
 
-	/* Register dns323 specific power-off method */
-	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-		pr_err("DNS323: failed to setup power-off GPIO\n");
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
 		pm_power_off = dns323b_power_off;
-	else
-		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_C1:
+		/* 5182 built-in SATA init */
+		orion5x_sata_init(&dns323_sata_data);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323c_power_off;
+
+		/* Now, -this- should theorically be done by the sata_mv driver
+		 * once I figure out what's going on there. Maybe the behaviour
+		 * of the LEDs should be somewhat passed via the platform_data.
+		 * for now, just whack the register and make the LEDs happy
+		 *
+		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
+		 * somebody else test it.
+		 */
+		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+		break;
+	}
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 60e734c..a1d6e46 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -25,6 +25,8 @@
 	 */
 	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
+	mdelay(200);
+	orion5x_clrbits(CPU_SOFT_RESET, 1);
 }
 
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 161fc2d..0f31305 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -35,7 +35,7 @@
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -46,7 +46,7 @@
 		/*
 		 * Only adjust if > 64M on current system
 		 */
-		if (node || (zone_size[0] <= sz))
+		if (zone_size[0] <= sz)
 			return;
 
 		zone_size[1] = zone_size[0] - sz;
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 45c23fd..40b6ac2d 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -26,6 +26,7 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,7 @@
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3d1dcb9..461ba40 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -446,7 +446,7 @@
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
@@ -715,7 +715,6 @@
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_corgi())
 		mi->bank[0].size = (32*1024*1024);
 	else
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 9e4d981..268a9bc 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -256,13 +256,9 @@
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 dri = 0;
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
 
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
-	return dri;
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
 }
 
 /* find a valid frequency point */
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 96ed130..a0ab308 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -34,7 +34,6 @@
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_e800())
 		mi->bank[0].size = (128*1024*1024);
 	else
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 890fb90..c6305c5 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -26,8 +26,7 @@
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index f626730..92361a6 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,24 +17,11 @@
  */
 #define PHYS_OFFSET	UL(0xa0000000)
 
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
+void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	cmx2xx_pci_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	cmx2xx_pci_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index d60db87..fa6a708 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -697,7 +697,7 @@
 };
 
 /* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5305a39..5e92d84 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -21,6 +21,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
@@ -396,6 +397,11 @@
 	}
 }
 
+static void __init palmt5_reserve(void)
+{
+	memblock_reserve(0xa0200000, 0x1000);
+}
+
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
@@ -421,6 +427,7 @@
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmt5_init
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 033b567..ce1104d 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -263,11 +263,11 @@
 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
 };
 
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
 	0, 9, 10, 11
 };
 
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
 };
 
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b4469..3d0c9cc 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
@@ -633,6 +634,12 @@
 	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
 }
 
+static void __init treo_reserve(void)
+{
+	memblock_reserve(0xa0000000, 0x1000);
+	memblock_reserve(0xa2000000, 0x1000);
+}
+
 static void __init treo_init(void)
 {
 	pxa_set_ffuart_info(NULL);
@@ -668,6 +675,7 @@
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
@@ -691,6 +699,7 @@
 	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
        .init_machine   = centro_init,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f4abdaa..bc2758b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -463,7 +463,6 @@
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (32*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0af3617..c059dac 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -41,10 +41,10 @@
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO95_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO113_AC97_nRESET,
 	GPIO113_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO95_AC97_nRESET,
 };
 
 void pxa27x_assert_ac97reset(int reset_gpio, int on)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4d2413ed..51756c7 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -818,6 +818,9 @@
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
@@ -844,7 +847,6 @@
 	sharpsl_save_param();
 	mi->nr_banks = 1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7512b82..83cc3a1 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -948,7 +948,6 @@
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index f5d1ae3..d303c69 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -3,8 +3,9 @@
  *
  *  Support for the Zipit Z2 Handheld device.
  *
- *  Author: 	Ken McGuire
- *  Created:	Jan 25, 2009
+ *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on research and code by: Ken McGuire
  *  Based on mainstone.c as modified for the Zipit Z2.
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -157,21 +158,14 @@
 	{
 		.name	= "U-Boot Bootloader",
 		.offset	= 0x0,
-		.size	= 0x20000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x20000,
-		.size	= 0x220000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x240000,
-		.size	= 0x5b0000,
-	},
-	{
+		.size	= 0x40000,
+	}, {
 		.name	= "U-Boot Environment",
-		.offset	= 0x7f0000,
+		.offset	= 0x40000,
+		.size	= 0x60000,
+	}, {
+		.name	= "Flash",
+		.offset	= 0x60000,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ee5e392..b4575ae 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -18,6 +18,7 @@
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -35,6 +36,7 @@
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 595be19..2fa38df 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -61,12 +61,11 @@
 /*
  * Adjust the zones if there are restrictions for DMA access.
  */
-void __init realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole)
+void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
 {
 	unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
 
-	if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+	if (!machine_is_realview_pbx() || size[0] <= dma_size)
 		return;
 
 	size[ZONE_NORMAL] = size[0] - dma_size;
@@ -232,12 +231,27 @@
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
 	u32 mask;
 
+	if (machine_is_realview_pb1176()) {
+		static bool inserted = false;
+
+		/*
+		 * The PB1176 does not have the status register,
+		 * assume it is inserted at startup, then invert
+		 * for each call so card insertion/removal will
+		 * be detected anyway. This will not be called if
+		 * GPIO on PL061 is active, which is the proper
+		 * way to do this on the PB1176.
+		 */
+		inserted = !inserted;
+		return inserted ? 0 : 1;
+	}
+
 	if (adev->res.start == REALVIEW_MMCI0_BASE)
 		mask = 1;
 	else
 		mask = 2;
 
-	return !(readl(REALVIEW_SYSMCI) & mask);
+	return readl(REALVIEW_SYSMCI) & mask;
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {
@@ -300,8 +314,13 @@
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -313,6 +332,12 @@
 	}, {	/* UART3 */
 		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
+	}, {	/* UART3 is on the dev chip in PB1176 */
+		.dev_id		= "dev:uart3",
+		.clk		= &ref24_clk,
+	}, {	/* UART4 only exists in PB1176 */
+		.dev_id		= "fpga:uart4",
+		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
 		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
@@ -322,12 +347,15 @@
 	}, {	/* MMC0 */
 		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
-	}, {	/* EB:CLCD */
+	}, {	/* CLCD is in the PB1176 and EB DevChip */
 		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
 		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:ssp0",
+		.clk		= &ref24_clk,
 	}
 };
 
@@ -342,7 +370,7 @@
 
 	return 0;
 }
-arch_initcall(clk_init);
+core_initcall(clk_init);
 
 /*
  * CLCD support.
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
new file mode 100644
index 0000000..0c5d749
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb()		dsb()
+#define rmb()		dmb()
+#define wmb()		mb()
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 2f5ccb2..002ab5d 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -26,6 +26,7 @@
 /*
  * Peripheral addresses
  */
+#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
 #define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
 #define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
 #define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 830055b..5c3c625 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
 #define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
 #define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2417bbc..5dafc15 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -30,10 +30,9 @@
 #endif
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole);
-#define arch_adjust_zones(node, size, hole) \
-	realview_adjust_zones(node, size, hole)
+extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
+#define arch_adjust_zones(size, hole) \
+	realview_adjust_zones(size, hole)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 422ccd7..991c1f8 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -128,6 +130,12 @@
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -212,7 +220,7 @@
 AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
 AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
 AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -323,6 +331,26 @@
 	.resource		= pmu_resources,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EB_CHARLCD,
+		.end	= IRQ_EB_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -441,6 +469,7 @@
 
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
+	platform_device_register(&char_lcd_device);
 	eth_device_register();
 	realview_usb_register(realview_eb_isp1761_resources);
 
@@ -457,7 +486,7 @@
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 96568eb..d2be12e 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -122,6 +124,12 @@
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -143,8 +151,6 @@
 #define MPMC_DMA	{ 0, 0 }
 #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
 #define PB1176_CLCD_DMA	{ 0, 0 }
-#define DMAC_IRQ	{ IRQ_PB1176_DMAC, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define SCTL_DMA	{ 0, 0 }
 #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
@@ -165,7 +171,9 @@
 #define PB1176_UART2_DMA	{ 11, 10 }
 #define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
 #define PB1176_UART3_DMA	{ 0x86, 0x87 }
-#define PB1176_SSP_IRQ		{ IRQ_PB1176_SSP, NO_IRQ }
+#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
+#define PB1176_UART4_DMA	{ 0, 0 }
+#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
@@ -173,7 +181,7 @@
 AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
 AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
 AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
 
 /* DevChip Primecells */
 AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
@@ -187,18 +195,16 @@
 AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
-
-/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
+AMBA_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
-//	&dmac_device,
 	&uart0_device,
 	&uart1_device,
 	&uart2_device,
 	&uart3_device,
+	&uart4_device,
 	&smc_device,
 	&clcd_device,
 	&sctl_device,
@@ -275,6 +281,26 @@
 	.resource		= &pmu_resource,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_PB1176_CHARLCD,
+		.end	= IRQ_PB1176_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -337,6 +363,7 @@
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
 	platform_device_register(&pmu_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -351,7 +378,7 @@
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7fbefbb..d591bc0 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -32,6 +33,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
@@ -123,6 +125,12 @@
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -189,7 +197,7 @@
 AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
@@ -373,7 +381,7 @@
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d3c113b..6c37621 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -25,12 +25,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 
 #include <asm/mach/arch.h>
@@ -113,6 +115,12 @@
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -179,7 +187,7 @@
 AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
@@ -323,7 +331,7 @@
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a235ba3..9428eff 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -24,6 +24,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -31,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
 #include <asm/smp_twd.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -135,6 +137,12 @@
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -201,7 +209,7 @@
 AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
@@ -409,7 +417,7 @@
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 779b45b..3ba3bab 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
@@ -304,6 +305,13 @@
 	s3c_pm_init();
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 static void __init h1940_init_irq(void)
 {
 	s3c24xx_init_irq();
@@ -346,6 +354,7 @@
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
+	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index ba93a35..054c9f9 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -119,7 +119,6 @@
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 3ca9265..f291ac2 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -137,7 +137,6 @@
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 8603b57..142d1f9 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/init.h>
@@ -570,12 +571,20 @@
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
     .phys_io = S3C2410_PA_UART,
 	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params = S3C2410_SDRAM_PA + 0x100,
 	.map_io = rx1950_map_io,
+	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index d2946de..6bb44f7 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/tty.h>
@@ -191,6 +192,13 @@
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 static void __init rx3715_init_irq(void)
 {
 	s3c24xx_init_irq();
@@ -214,6 +222,7 @@
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= rx3715_map_io,
+	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index 3aadbf4..087e57f 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -294,7 +294,7 @@
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
 	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
 
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
 			apll, mpll, epll);
 
 	clk_fout_apll.rate = apll;
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 154bca4..af91fef 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -183,6 +183,11 @@
 	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
 }
 
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.id		= -1,
@@ -406,14 +411,14 @@
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
+		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "i2s_v32",
 		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
-	}
+		.ctrlbit	= (1 << 6),
+	},
 };
 
 static struct clk init_clocks[] = {
@@ -429,25 +434,25 @@
 		.id		= 0,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<7),
+		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "uart",
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "uart",
 		.id		= 2,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<9),
+		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "uart",
 		.id		= 3,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<10),
+		.ctrlbit	= (1 << 20),
 	},
 };
 
@@ -497,8 +502,8 @@
 	.clk		= {
 		.name		= "sclk_dac",
 		.id		= -1,
-		.ctrlbit	= (1 << 10),
-		.enable		= s5pv210_clk_ip1_ctrl,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 2),
 	},
 	.sources	= &clkset_sclk_dac,
 	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
@@ -527,8 +532,8 @@
 	.clk		= {
 		.name		= "sclk_hdmi",
 		.id		= -1,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 11),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 0),
 	},
 	.sources	= &clkset_sclk_hdmi,
 	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
@@ -565,8 +570,8 @@
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 0,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 4),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 24),
 	},
 	.sources = &clkset_sclk_audio0,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
@@ -594,8 +599,8 @@
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 1,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 5),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 25),
 	},
 	.sources = &clkset_sclk_audio1,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
@@ -623,8 +628,8 @@
 	.clk		= {
 		.name		= "sclk_audio",
 		.id		= 2,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 6),
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 26),
 	},
 	.sources = &clkset_sclk_audio2,
 	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
@@ -680,8 +685,8 @@
 		.clk	= {
 			.name		= "uclk1",
 			.id		= 0,
-			.ctrlbit	= (1<<17),
-			.enable		= s5pv210_clk_ip3_ctrl,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 12),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
@@ -690,8 +695,8 @@
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 18),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 13),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
@@ -700,8 +705,8 @@
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 19),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 14),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
@@ -710,8 +715,8 @@
 		.clk		= {
 			.name		= "uclk1",
 			.id		= 3,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 20),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 15),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
@@ -720,8 +725,8 @@
 		.clk	= {
 			.name		= "sclk_mixer",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip1_ctrl,
-			.ctrlbit	= (1 << 9),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 1),
 		},
 		.sources = &clkset_sclk_mixer,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
@@ -738,8 +743,8 @@
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 24),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 2),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
@@ -748,8 +753,8 @@
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 25),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 3),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
@@ -758,8 +763,8 @@
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 26),
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 4),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
@@ -768,6 +773,8 @@
 		.clk		= {
 			.name		= "sclk_cam",
 			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 3),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
@@ -776,6 +783,8 @@
 		.clk		= {
 			.name		= "sclk_cam",
 			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 4),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
@@ -784,8 +793,8 @@
 		.clk		= {
 			.name		= "sclk_fimd",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip1_ctrl,
-			.ctrlbit	= (1 << 0),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 5),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
@@ -794,8 +803,8 @@
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 16),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 8),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
@@ -804,8 +813,8 @@
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 17),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 9),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
@@ -814,8 +823,8 @@
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 2,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 18),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 10),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
@@ -824,8 +833,8 @@
 		.clk		= {
 			.name		= "sclk_mmc",
 			.id		= 3,
-			.enable		= s5pv210_clk_ip2_ctrl,
-			.ctrlbit	= (1 << 19),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 11),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
@@ -864,8 +873,8 @@
 		.clk		= {
 			.name		= "sclk_csis",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 31),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 6),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
@@ -874,8 +883,8 @@
 		.clk		= {
 			.name		= "sclk_spi",
 			.id		= 0,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 12),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 16),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
@@ -884,8 +893,8 @@
 		.clk		= {
 			.name		= "sclk_spi",
 			.id		= 1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 13),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 17),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
@@ -894,8 +903,8 @@
 		.clk		= {
 			.name		= "sclk_pwi",
 			.id		= -1,
-			.enable		= &s5pv210_clk_ip4_ctrl,
-			.ctrlbit	= (1 << 2),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 29),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
@@ -904,8 +913,8 @@
 		.clk		= {
 			.name		= "sclk_pwm",
 			.id		= -1,
-			.enable		= s5pv210_clk_ip3_ctrl,
-			.ctrlbit	= (1 << 23),
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 19),
 		},
 		.sources = &clkset_group2,
 		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index ec03f187..b7a9a60 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -13,8 +13,7 @@
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index d5277f9..128a1df 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -17,10 +17,10 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	sa1111_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 50f071c..5ea24d4 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -20,6 +20,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 3053e5b..d9c4812 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -19,9 +19,8 @@
 
 #ifndef __ASSEMBLY__
 
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
 {
-  if (node != 0) return;
   /* Only the first 4 MB (=1024 Pages) are usable for DMA */
   /* See dev / -> .properties in OpenFirmware. */
   zone_size[1] = zone_size[0] - 1024;
@@ -30,8 +29,8 @@
   zhole_size[0] = 0;
 }
 
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	__arch_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_4M)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f2b88c5..4c704b4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -70,6 +70,18 @@
 
 menu "Timer and clock configuration"
 
+config SHMOBILE_TIMER_HZ
+	int "Kernel HZ (jiffies per second)"
+	range 32 1024
+	default "128"
+	help
+	  Allows the configuration of the timer frequency. It is customary
+	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
+	  case of low timer frequencies other values may be more suitable.
+	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
+	  to select a HZ value such as 128 that can evenly divide RCLK.
+	  A HZ value that does not divide evenly may cause timer drift.
+
 config SH_TIMER_CMT
 	bool "CMT timer driver"
 	default y
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 5179b72..132256b 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -2,7 +2,6 @@
 #define __ASM_MACH_IRQS_H
 
 #define NR_IRQS         512
-#define NR_IRQS_LEGACY  8
 
 #define evt2irq(evt)		(((evt) >> 5) - 16)
 #define irq2evt(irq)		(((irq) + 16) << 5)
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 39f6ccf..18febf9 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -341,8 +341,11 @@
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 13e27c7..36ff056 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -428,8 +428,11 @@
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 6xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5af71d5..5d12d54 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -1212,6 +1212,8 @@
 };
 #endif
 
+static struct clk dummy_apb_pclk;
+
 #define DEF_LOOKUP(devid, clkref)		\
 	{					\
 	.dev_id = devid,			\
@@ -1223,6 +1225,10 @@
  * look up through clockdevice.
  */
 static struct clk_lookup lookups[] = {
+	{
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	},
 	/* Connected directly to the AMBA bus */
 	DEF_LOOKUP("amba",      &amba_clk),
 	DEF_LOOKUP("cpu",       &cpu_clk),
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index ab000df..bf134bc 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -35,14 +35,6 @@
 #endif
 
 /*
- * TCM memory whereabouts
- */
-#define ITCM_OFFSET	0xffff2000
-#define ITCM_END	0xffff3fff
-#define DTCM_OFFSET	0xffff4000
-#define DTCM_END	0xffff5fff
-
-/*
  * We enable a real big DMA buffer if need be.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index d2a0b88..bfcda98 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/memblock.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
@@ -22,6 +23,21 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init u300_reserve(void)
+{
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+        memblock_reserve(PHYS_OFFSET, 0x00100000);
+#endif
+#endif
+}
+
 static void __init u300_init_machine(void)
 {
 	u300_init_devices();
@@ -49,6 +65,7 @@
 	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
+	.reserve	= u300_reserve,
 	.init_irq	= u300_init_irq,
 	.timer		= &u300_timer,
 	.init_machine	= u300_init_machine,
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c7bc419..4556aea 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,4 +7,5 @@
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b7..0e8fd13 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <plat/pincfg.h>
 #include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+	/* SSP0 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD,
+	GPIO146_SSP0_TXD,
+
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+};
+
 static void ab4500_spi_cs_control(u32 command)
 {
 	/* set the FRM signal, which is CS  - TODO */
@@ -48,15 +71,20 @@
 	.cs_control = ab4500_spi_cs_control,
 };
 
+static struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+};
+
 static struct spi_board_info u8500_spi_devices[] = {
 	{
 		.modalias = "ab8500",
 		.controller_data = &ab4500_chip_info,
+		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
 		.chip_select = 0,
 		.mode = SPI_MODE_0,
-		.irq = IRQ_AB4500,
+		.irq = IRQ_DB8500_AB8500,
 	},
 };
 
@@ -118,6 +146,10 @@
 {
 	int i;
 
+	u8500_init_devices();
+
+	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
 	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
 	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
 	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@
 
 	spi_register_board_info(u8500_spi_devices,
 			ARRAY_SIZE(u8500_spi_devices));
-
-	u8500_init_devices();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 6544855..d8ab7f1 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -16,6 +16,7 @@
 
 #include <asm/clkdev.h>
 
+#include <plat/mtu.h>
 #include <mach/hardware.h>
 #include "clock.h"
 
@@ -59,6 +60,9 @@
 #define PRCM_DMACLK_MGT		0x074
 #define PRCM_B2R2CLK_MGT	0x078
 #define PRCM_TVCLK_MGT		0x07C
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_STOPPED	(1 << 16)
+#define PRCM_TCR_DOZE_MODE	(1 << 17)
 #define PRCM_UNIPROCLK_MGT	0x278
 #define PRCM_SSPCLK_MGT		0x280
 #define PRCM_RNGCLK_MGT		0x284
@@ -120,10 +124,95 @@
 }
 EXPORT_SYMBOL(clk_disable);
 
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+		+ PRCM_TCR;
+	u32 tcr = readl(addr);
+	int mtu = (int) clk->data;
+	/*
+	 * One of these is selected eventually
+	 * TODO: Replace the constant with a reference
+	 * to the ULP source once this is modeled.
+	 */
+	unsigned long clk32k = 32768;
+	unsigned long mturate;
+	unsigned long retclk;
+
+	/* Get the rate from the parent as a default */
+	if (clk->parent_periph)
+		mturate = clk_get_rate(clk->parent_periph);
+	else if (clk->parent_cluster)
+		mturate = clk_get_rate(clk->parent_cluster);
+	else
+		/* We need to be connected SOMEWHERE */
+		BUG();
+
+	/*
+	 * Are we in doze mode?
+	 * In this mode the parent peripheral or the fixed 32768 Hz
+	 * clock is fed into the block.
+	 */
+	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+		/*
+		 * Here we're using the clock input from the APE ULP
+		 * clock domain. But first: are the timers stopped?
+		 */
+		if (tcr & PRCM_TCR_STOPPED) {
+			clk32k = 0;
+			mturate = 0;
+		} else {
+			/* Else default mode: 0 and 2.4 MHz */
+			clk32k = 0;
+			if (cpu_is_u5500())
+				/* DB5500 divides by 8 */
+				mturate /= 8;
+			else if (cpu_is_u8500ed()) {
+				/*
+				 * This clocking setting must not be used
+				 * in the ED chip, it is simply not
+				 * connected anywhere!
+				 */
+				mturate = 0;
+				BUG();
+			} else
+				/*
+				 * In this mode the ulp38m4 clock is divided
+				 * by a factor 16, on the DB8500 typically
+				 * 38400000 / 16 ~ 2.4 MHz.
+				 * TODO: Replace the constant with a reference
+				 * to the ULP source once this is modeled.
+				 */
+				mturate = 38400000 / 16;
+		}
+	}
+
+	/* Return the clock selected for this MTU */
+	if (tcr & (1 << mtu))
+		retclk = clk32k;
+	else
+		retclk = mturate;
+
+	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+	return retclk;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long rate;
 
+	/*
+	 * If there is a custom getrate callback for this clock,
+	 * it will take precedence.
+	 */
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	if (clk->ops && clk->ops->get_rate)
 		return clk->ops->get_rate(clk);
 
@@ -341,8 +430,9 @@
 
 /* Peripheral Cluster #6 */
 
-static DEFINE_PRCC_CLK(6, mtu1_v1, 	8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 	7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
@@ -357,12 +447,17 @@
 /* Peripheral Cluster #7 */
 
 static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 	3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 	2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
 static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
 
+static struct clk clk_dummy_apb_pclk;
+
 static struct clk_lookup u8500_common_clks[] = {
+	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
+
 	/* Peripheral Cluster #1 */
 	CLK(gpio0,	"gpio.0",	NULL),
 	CLK(gpio0,	"gpio.1",	NULL),
@@ -503,15 +598,17 @@
 	CLK(uiccclk,	"uicc",		NULL),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	if (cpu_is_u8500ed()) {
 		clk_prcmu_ops.enable = clk_prcmu_ed_enable;
 		clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+		clk_per6clk.rate = 100000000;
 	} else if (cpu_is_u5500()) {
 		/* Clock tree for U5500 not implemented yet */
 		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
 		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+		clk_per6clk.rate = 26000000;
 	}
 
 	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -522,4 +619,3 @@
 
 	return 0;
 }
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index e4f99b6..a058025 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -28,6 +28,9 @@
  * @ops:		pointer to clkops struct used to control this clock
  * @name:		name, for debugging
  * @enabled:		refcount. positive if enabled, zero if disabled
+ * @get_rate:		custom callback for getting the clock rate
+ * @data:		custom per-clock data for example for the get_rate
+ *			callback
  * @rate:		fixed rate for clocks which don't implement
  * 			ops->getrate
  * @prcmu_cg_off:	address offset of the combined enable/disable register
@@ -67,6 +70,8 @@
 	const struct clkops	*ops;
 	const char 		*name;
 	unsigned int		enabled;
+	unsigned long		(*get_rate)(struct clk *);
+	void			*data;
 
 	unsigned long		rate;
 	struct list_head	list;
@@ -117,9 +122,26 @@
 		.parent_periph 	= _kernclk				\
 	}
 
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops		= &clk_prcc_ops,			\
+		.cluster	= _pclust,				\
+		.prcc_bus	= _bus_en,				\
+		.prcc_kernel	= _kernel_en,				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph	= _kernclk,				\
+		.get_rate	= _callback,				\
+		.data		= (void *) _data			\
+	}
+
+
 #define CLK(_clk, _devname, _conname)			\
 	{						\
 		.clk	= &clk_##_clk,			\
 		.dev_id	= _devname,			\
 		.con_id = _conname,			\
 	}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 6a3ac45..e9278f6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -21,6 +21,7 @@
 	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
 static struct platform_device *u5500_platform_devs[] __initdata = {
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d81ad02..e0fd747 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -62,6 +62,12 @@
 {
 	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
 	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 #ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 8229034..654fca9 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -65,7 +65,7 @@
 		.end   = U8500_SSP0_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {IRQ_SSP0, NO_IRQ },
+	.irq = {IRQ_DB8500_SSP0, NO_IRQ },
 	/* ST-Ericsson modified id */
 	.periphid = SSP_PER_ID,
 };
@@ -77,8 +77,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C0,
-		.end	= IRQ_I2C0,
+		.start	= IRQ_DB8500_I2C0,
+		.end	= IRQ_DB8500_I2C0,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -97,8 +97,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C4,
-		.end	= IRQ_I2C4,
+		.start	= IRQ_DB8500_I2C4,
+		.end	= IRQ_DB8500_I2C4,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -130,8 +130,8 @@
 		.name = "lcla",
 	},
 	[3] = {
-		.start = IRQ_DMA,
-		.end = IRQ_DMA,
+		.start = IRQ_DB8500_DMA,
+		.end   = IRQ_DB8500_DMA,
 		.flags = IORESOURCE_IRQ}
 };
 
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
new file mode 100644
index 0000000..cca4f70
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_MOP500_H
+#define __MACH_IRQS_BOARD_MOP500_H
+
+#define AB8500_NR_IRQS			104
+
+#define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
+#define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
+					 + AB8500_NR_IRQS)
+#define MOP500_IRQ_END			MOP500_AB8500_IRQ_END
+
+#if MOP500_IRQ_END > IRQ_BOARD_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END	MOP500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
new file mode 100644
index 0000000..6fbfe5e
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB5500_H
+#define __MACH_IRQS_DB5500_H
+
+#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
+#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
+#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
+#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
+#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
+#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
+#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
+#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
+#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
+#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
+#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
+#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
+#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
+#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
+#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
+#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
new file mode 100644
index 0000000..8b5d9f0
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB8500_H
+#define __MACH_IRQS_DB8500_H
+
+#define IRQ_DB8500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB8500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB8500_PMU			(IRQ_SHPI_START + 7)
+#define IRQ_DB8500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB8500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB8500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB8500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB8500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB8500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB8500_SSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB8500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB8500_MSP1_RX		(IRQ_SHPI_START + 16)
+#define IRQ_DB8500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB8500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB8500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB8500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB8500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB8500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB8500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB8500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB8500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB8500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB8500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB8500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB8500_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_DB8500_MSP0			(IRQ_SHPI_START + 31)
+#define IRQ_DB8500_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_DB8500_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_DB8500_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_DB8500_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_DB8500_HSIR_CH4_OVRRUN	(IRQ_SHPI_START + 36)
+#define IRQ_DB8500_HSIR_CH5_OVRRUN	(IRQ_SHPI_START + 37)
+#define IRQ_DB8500_HSIR_CH6_OVRRUN	(IRQ_SHPI_START + 38)
+#define IRQ_DB8500_HSIR_CH7_OVRRUN	(IRQ_SHPI_START + 39)
+#define IRQ_DB8500_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_DB8500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB8500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB8500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB8500_SVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB8500_SVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB8500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB8500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB8500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB8500_SPI3			(IRQ_SHPI_START + 49)
+#define IRQ_DB8500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB8500_I2C4			(IRQ_SHPI_START + 51)
+#define IRQ_DB8500_SSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB8500_SKE			(IRQ_SHPI_START + 53)
+#define IRQ_DB8500_KB			(IRQ_SHPI_START + 54)
+#define IRQ_DB8500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB8500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB8500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB8500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB8500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB8500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB8500_MSP1			(IRQ_SHPI_START + 62)
+#define IRQ_DB8500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB8500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB8500_SRPTIMER		(IRQ_SHPI_START + 97)
+#define IRQ_DB8500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB8500_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_DB8500_SDMMC5		(IRQ_SHPI_START + 100)
+#define IRQ_DB8500_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_DB8500_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_DB8500_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_DB8500_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_DB8500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB8500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB8500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB8500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB8500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB8500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB8500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB8500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB8500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB8500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB8500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB8500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB8500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB8500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB8500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB8500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 7970684..10385bd 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,7 +10,8 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
 
 #define IRQ_LOCALTIMER                  29
 #define IRQ_LOCALWDOG                   30
@@ -67,12 +68,21 @@
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
  */
-#define U8500_SOC_NR_IRQS		161
+#define DBX500_NR_INTERNAL_IRQS		161
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + U8500_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - U8500_SOC_NR_IRQS)
-#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
+#define IRQ_BOARD_START			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
-#endif /*ASM_ARCH_IRQS_H*/
+/* This will be overridden by board-specific irq headers */
+#define IRQ_BOARD_END			IRQ_BOARD_START
+
+#ifdef CONFIG_MACH_U8500_MOP
+#include <mach/irqs-board-mop500.h>
+#endif
+
+#define NR_IRQS				IRQ_BOARD_END
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 8552eb18..0271ca0 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -30,22 +30,22 @@
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(U8500_UART_FR) & (1 << 5))
 		barrier();
-	writeb(c, U8500_UART_DR);
+	__raw_writeb(c, U8500_UART_DR);
 }
 
 static void flush(void)
 {
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
-	while (readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(U8500_UART_FR) & (1 << 3))
 		barrier();
 }
 
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
new file mode 100644
index 0000000..9055d5d
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -0,0 +1,742 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_PINS_DB8500_H
+#define __MACH_PINS_DB8500_H
+
+/*
+ * TODO: Eventually encode all non-board specific pull up/down configuration
+ * here.
+ */
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
+#define GPIO2_NONE		PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
+#define GPIO3_NONE		PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL		PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA		PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL		PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA		PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA		PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA		PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL		PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL		PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA	PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA		PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL	PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL		PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL		PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA		PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
+#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
+#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
+#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
+#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
+#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
+#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
+#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
+#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
+#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
+#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
+#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
+#define GPIO34_NONE		PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
+#define GPIO35_NONE		PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO		PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
+#define GPIO77_NONE		PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO		PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO		PIN_CFG(84, GPIO)
+#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO		PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO		PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO		PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO		PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO		PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO		PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO		PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO		PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO		PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO		PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO		PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
+#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
+#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
+#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
+#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
+#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
+#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
+#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
+#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
+#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
+#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
+#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL	PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA	PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO		PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO		PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO		PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO		PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO		PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
+#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO		PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
+#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO		PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
+#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO		PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
+#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO		PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
+#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO		PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
+#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO		PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
+#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
+#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
+#define GPIO160_NONE		PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
+#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
+#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
+#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
+#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
+#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
+#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
+#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
+#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
+#define GPIO168_NONE		PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
+#define GPIO202_PWL		PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA	PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL	PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
+#define GPIO226_PWL		PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO		PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO		PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
+#define GPIO229_PWL		PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA	PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO		PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
+#define GPIO230_PWL		PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL	PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO		PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO		PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO		PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
+#define GPIO258_NONE		PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO		PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO		PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO		PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO		PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO		PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO		PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO		PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO		PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO		PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3dff864..e38acb0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,6 +28,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
 
@@ -354,6 +355,21 @@
 	.gpio_cd	= -1,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = VERSATILE_CHAR_LCD_BASE,
+		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name           =       "arm-charlcd",
+	.id             =       -1,
+	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
+	.resource       =       char_lcd_resources,
+};
+
 /*
  * Clock handling
  */
@@ -400,8 +416,13 @@
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -425,6 +446,9 @@
 	}, {	/* MMC1 */
 		.dev_id		= "fpga:0b",
 		.clk		= &ref24_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:f4",
+		.clk		= &ref24_clk,
 	}, {	/* CLCD */
 		.dev_id		= "dev:20",
 		.clk		= &osc4_clk,
@@ -703,6 +727,12 @@
 	.irq_base	= IRQ_GPIO1_START,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -772,7 +802,7 @@
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -843,6 +873,7 @@
 	platform_device_register(&versatile_flash_device);
 	platform_device_register(&versatile_i2c_device);
 	platform_device_register(&smc91x_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 334f0df..13c7e5f 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -304,7 +304,7 @@
 }
 
 
-struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index e6f7303..577df6c 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -2,6 +2,7 @@
  * Versatile Express Core Tile Cortex A9x4 Support
  */
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -9,11 +10,13 @@
 #include <linux/amba/clcd.h>
 
 #include <asm/clkdev.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/smp_twd.h>
 
 #include <mach/clkdev.h>
 #include <mach/ct-ca9x4.h>
@@ -51,6 +54,7 @@
 
 static void __init ct_ca9x4_map_io(void)
 {
+	twd_base = MMIO_P2V(A9_MPCORE_TWD);
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 
@@ -235,7 +239,7 @@
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
-	.phys_io	= V2M_UART0,
+	.phys_io	= V2M_UART0 & SECTION_MASK,
 	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= ct_ca9x4_map_io,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index 8650f04..f9e2f8d 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -28,6 +28,7 @@
 #define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
 #define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
 #define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_TWD		(CT_CA9X4_MPIC + 0x0600)
 #define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
 
 /*
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d250711..817f0ad 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -241,7 +241,7 @@
 
 static unsigned int v2m_mmci_status(struct device *dev)
 {
-	return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0));
+	return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
 }
 
 static struct mmci_platform_data v2m_mmci_data = {
@@ -298,8 +298,13 @@
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup v2m_lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:uart0",
 		.clk		= &osc2_clk,
 	}, {	/* UART1 */
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 642207e..83c5632 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -93,7 +93,7 @@
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index b2eda4d..7a1fa6a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -36,6 +36,8 @@
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
 #include <mach/fb.h>
+#include <mach/regs-ldm.h>
+#include <mach/w90p910_keypad.h>
 
 #include "cpu.h"
 
@@ -207,7 +209,7 @@
 	.divider	= 24,
 	.sleep		= 0,
 	.txnum		= 0,
-	.txbitlen	= 1,
+	.txbitlen	= 8,
 	.bus_num	= 0,
 };
 
@@ -256,7 +258,7 @@
 		.modalias = "m25p80",
 		.max_speed_hz = 20000000,
 		.bus_num = 0,
-		.chip_select = 1,
+		.chip_select = 0,
 		.platform_data = &nuc900_spi_flash_data,
 		.mode = SPI_MODE_0,
 	},
@@ -361,6 +363,39 @@
 
 /* KPI controller*/
 
+static int nuc900_keymap[] = {
+	KEY(0, 0, KEY_A),
+	KEY(0, 1, KEY_B),
+	KEY(0, 2, KEY_C),
+	KEY(0, 3, KEY_D),
+
+	KEY(1, 0, KEY_E),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_H),
+
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_J),
+	KEY(2, 2, KEY_K),
+	KEY(2, 3, KEY_L),
+
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P),
+};
+
+static struct matrix_keymap_data nuc900_map_data = {
+	.keymap			= nuc900_keymap,
+	.keymap_size		= ARRAY_SIZE(nuc900_keymap),
+};
+
+struct w90p910_keypad_platform_data nuc900_keypad_info = {
+	.keymap_data	= &nuc900_map_data,
+	.prescale	= 0xfa,
+	.debounce	= 0x50,
+};
+
 static struct resource nuc900_kpi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_KPI,
@@ -380,9 +415,49 @@
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
 	.resource	= nuc900_kpi_resource,
+	.dev		= {
+				.platform_data = &nuc900_keypad_info,
+			}
 };
 
-#ifdef CONFIG_FB_NUC900
+/* LCD controller*/
+
+static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc900_lcd_info[0],
+#else
+	.displays		= nuc900_lcd_info,
+#endif
+	.num_displays		= ARRAY_SIZE(nuc900_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
 
 static struct resource nuc900_lcd_resource[] = {
 	[0] = {
@@ -406,23 +481,10 @@
 	.dev              = {
 		.dma_mask               = &nuc900_device_lcd_dmamask,
 		.coherent_dma_mask      = -1,
+		.platform_data = &nuc900_fb_info,
 	}
 };
 
-void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
-{
-	struct nuc900fb_mach_info *npd;
-
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
-	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
-		nuc900_device_lcd.dev.platform_data = npd;
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif
-
 /* AUDIO controller*/
 static u64 nuc900_device_audio_dmamask = -1;
 static struct resource nuc900_ac97_resource[] = {
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
new file mode 100644
index 0000000..6087abd
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-gcr.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_GCR_H
+#define __ASM_ARCH_REGS_GCR_H
+
+/* Global control registers */
+
+#define GCR_BA		W90X900_VA_GCR
+#define REG_PDID	(GCR_BA+0x000)
+#define REG_PWRON	(GCR_BA+0x004)
+#define REG_ARBCON	(GCR_BA+0x008)
+#define REG_MFSEL	(GCR_BA+0x00C)
+#define REG_EBIDPE	(GCR_BA+0x010)
+#define REG_LCDDPE	(GCR_BA+0x014)
+#define REG_GPIOCPE	(GCR_BA+0x018)
+#define REG_GPIODPE	(GCR_BA+0x01C)
+#define REG_GPIOEPE	(GCR_BA+0x020)
+#define REG_GPIOFPE	(GCR_BA+0x024)
+#define REG_GPIOGPE	(GCR_BA+0x028)
+#define REG_GPIOHPE	(GCR_BA+0x02C)
+#define REG_GPIOIPE	(GCR_BA+0x030)
+#define REG_GTMP1	(GCR_BA+0x034)
+#define REG_GTMP2	(GCR_BA+0x038)
+#define REG_GTMP3	(GCR_BA+0x03C)
+
+#endif /*  __ASM_ARCH_REGS_GCR_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index b3edc3c..04d295f 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,51 +20,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
-#include <mach/regs-ldm.h>
 #include <mach/fb.h>
 
 #include "nuc950.h"
 
-#ifdef CONFIG_FB_NUC900
-/* LCD Controller */
-static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
-	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
-	[0] = {
-		.type		= LCM_DCCS_VA_SRC_RGB565,
-		.width 		= 320,
-		.height		= 240,
-		.xres		= 320,
-		.yres		= 240,
-		.bpp		= 16,
-		.pixclock	= 200000,
-		.left_margin	= 34,
-		.right_margin   = 54,
-		.hsync_len	= 10,
-		.upper_margin	= 18,
-		.lower_margin	= 4,
-		.vsync_len	= 1,
-		.dccs		= 0x8e00041a,
-		.devctl		= 0x060800c0,
-		.fbctrl		= 0x00a000a0,
-		.scale		= 0x04000400,
-	},
-};
-
-static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
-#if defined(CONFIG_GPM1040A0_320X240)
-	.displays		= &nuc950_lcd_info[0],
-#else
-	.displays		= nuc950_lcd_info,
-#endif
-	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
-	.default_display	= 0,
-	.gpio_dir		= 0x00000004,
-	.gpio_dir_mask		= 0xFFFFFFFD,
-	.gpio_data		= 0x00000004,
-	.gpio_data_mask		= 0xFFFFFFFD,
-};
-#endif
-
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -74,9 +33,6 @@
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
-#ifdef CONFIG_FB_NUC900
-	nuc900_fb_set_platdata(&nuc950_fb_info);
-#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
index 656f03b..1523f41 100644
--- a/arch/arm/mach-w90x900/nuc910.c
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -26,6 +26,8 @@
 static struct platform_device *nuc910_dev[] __initdata = {
 	&nuc900_device_ts,
 	&nuc900_device_rtc,
+	&nuc900_device_lcd,
+	&nuc900_device_kpi,
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 4d1f1ab..5704f74 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -26,9 +26,7 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
-#ifdef CONFIG_FB_NUC900
 	&nuc900_device_lcd,
-#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 346ae14..87ec141 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -717,17 +717,6 @@
 	  a few prototypes like that in existence) and therefore access to
 	  that required register must be emulated.
 
-config HAS_TLS_REG
-	bool
-	depends on !TLS_REG_EMUL
-	default y if SMP || CPU_32v7
-	help
-	  This selects support for the CP15 thread register.
-	  It is defined to be available on some ARMv6 processors (including
-	  all SMP capable ARMv6's) or later processors.  User space may
-	  assume directly accessing that register and always obtain the
-	  expected value only on ARMv7 and above.
-
 config NEEDS_SYSCALL_FOR_CMPXCHG
 	bool
 	help
@@ -735,6 +724,25 @@
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 
@@ -794,6 +802,8 @@
 
 config ARM_DMA_MEM_BUFFERABLE
 	bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+		     MACH_REALVIEW_PB11MP)
 	default y if CPU_V6 || CPU_V7
 	help
 	  Historically, the kernel has used strongly ordered mappings to
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index e8d34a80..d63b6c4 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -15,7 +15,6 @@
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f98c35..d073b64 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -924,8 +924,20 @@
 		ai_usermode = UM_FIXUP;
 	}
 
-	hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
-	hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
+	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+			"alignment exception");
+
+	/*
+	 * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section
+	 * fault, not as alignment error.
+	 *
+	 * TODO: handle ARMv6K properly. Runtime check for 'K' extension is
+	 * needed.
+	 */
+	if (cpu_architecture() <= CPU_ARCH_ARMv6) {
+		hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN,
+				"alignment exception");
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9819869..9982eb3 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,14 +32,14 @@
 static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -47,14 +47,14 @@
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 }
 
 static inline void l2x0_inv_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -75,9 +75,9 @@
 
 	/* Clean by PA followed by Invalidate by PA */
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 #else
 
@@ -90,7 +90,7 @@
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
 }
 #endif
 
@@ -109,7 +109,7 @@
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
@@ -215,8 +215,11 @@
 
 	l2x0_base = base;
 
-	cache_id = readl(l2x0_base + L2X0_CACHE_ID);
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
+	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	aux &= aux_mask;
+	aux |= aux_val;
 
 	/* Determine the number of ways */
 	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
@@ -245,17 +248,15 @@
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
 
 		/* l2x0 controller is disabled */
-		aux &= aux_mask;
-		aux |= aux_val;
-		writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
 		l2x0_inv_all();
 
 		/* enable L2X0 */
-		writel(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
 	outer_cache.inv_range = l2x0_inv_range;
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index e46ecd8..86aa689 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -211,8 +211,9 @@
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_SMP
-	str	r0, [r0]			@ write for ownership
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
 #endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
@@ -234,7 +235,7 @@
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
@@ -257,7 +258,7 @@
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -283,9 +284,13 @@
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
+#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -295,6 +300,11 @@
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)
 
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 5eb4fd9..ac163de 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -18,7 +18,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %0				\n\
+	mov	ip, %2				\n\
 1:	mov	lr, r1				\n\
 	ldmia	r1!, {r2 - r9}			\n\
 	pld	[lr, #32]			\n\
@@ -64,7 +64,7 @@
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
 	ldmfd	sp!, {r4-r9, pc}"
 	:
-	: "I" (PAGE_SIZE));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 7c2eb55..cb589cb 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -27,7 +27,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
@@ -44,7 +44,7 @@
 	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
 	ldmfd	 sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 172e6a5..30c7d04 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -25,7 +25,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
@@ -40,7 +40,7 @@
 	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
 	ldmfd	sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 747ad41..f9cde07 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -34,7 +34,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %0				\n\
+	mov	lr, %2				\n\
 						\n\
 	pld	[r1, #0]			\n\
 	pld	[r1, #32]			\n\
@@ -67,7 +67,7 @@
 						\n\
 	ldmfd	sp!, {r4, r5, pc}"
 	:
-	: "I" (PAGE_SIZE / 64 - 1));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
deleted file mode 100644
index c8c0c4b..0000000
--- a/arch/arm/mm/discontig.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mm/discontig.c
- *
- * Discontiguous memory support.
- *
- * Initial code: Copyright (C) 1999-2000 Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mmzone.h>
-#include <linux/bootmem.h>
-
-#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
-# error Fix Me Please
-#endif
-
-/*
- * Our node_data structure for discontiguous memory.
- */
-
-pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &bootmem_node_data[0] },
-  { .bdata = &bootmem_node_data[1] },
-  { .bdata = &bootmem_node_data[2] },
-  { .bdata = &bootmem_node_data[3] },
-#if MAX_NUMNODES == 16
-  { .bdata = &bootmem_node_data[4] },
-  { .bdata = &bootmem_node_data[5] },
-  { .bdata = &bootmem_node_data[6] },
-  { .bdata = &bootmem_node_data[7] },
-  { .bdata = &bootmem_node_data[8] },
-  { .bdata = &bootmem_node_data[9] },
-  { .bdata = &bootmem_node_data[10] },
-  { .bdata = &bootmem_node_data[11] },
-  { .bdata = &bootmem_node_data[12] },
-  { .bdata = &bootmem_node_data[13] },
-  { .bdata = &bootmem_node_data[14] },
-  { .bdata = &bootmem_node_data[15] },
-#endif
-};
-
-EXPORT_SYMBOL(discontig_node_data);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 13fa536..c704eed 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -24,15 +24,6 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = ISA_DMA_THRESHOLD;
@@ -123,6 +114,15 @@
 }
 
 #ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -183,6 +183,8 @@
 __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 {
 	struct arm_vmregion *c;
+	size_t align;
+	int bit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -191,9 +193,20 @@
 	}
 
 	/*
+	 * Align the virtual region allocation - maximum alignment is
+	 * a section size, minimum is a page size.  This helps reduce
+	 * fragmentation of the DMA space, and also prevents allocations
+	 * smaller than a section from crossing a section boundary.
+	 */
+	bit = fls(size - 1) + 1;
+	if (bit > SECTION_SHIFT)
+		bit = SECTION_SHIFT;
+	align = 1 << bit;
+
+	/*
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
-	c = arm_vmregion_alloc(&consistent_head, size,
+	c = arm_vmregion_alloc(&consistent_head, align, size,
 			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
 	if (c) {
 		pte_t *pte;
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 92f5801..23b0b03 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -393,6 +393,9 @@
 	if (addr < TASK_SIZE)
 		return do_page_fault(addr, fsr, regs);
 
+	if (user_mode(regs))
+		goto bad_area;
+
 	index = pgd_index(addr);
 
 	/*
@@ -410,7 +413,16 @@
 	pmd_k = pmd_offset(pgd_k, addr);
 	pmd   = pmd_offset(pgd, addr);
 
-	if (pmd_none(*pmd_k))
+	/*
+	 * On ARM one Linux PGD entry contains two hardware entries (see page
+	 * tables layout in pgtable.h). We normally guarantee that we always
+	 * fill both L1 entries. But create_mapping() doesn't follow the rule.
+	 * It can create inidividual L1 entries, so here we have to call
+	 * pmd_none() check for the entry really corresponded to address, not
+	 * for the first of pair.
+	 */
+	index = (addr >> SECTION_SHIFT) & 1;
+	if (pmd_none(pmd_k[index]))
 		goto bad_area;
 
 	copy_pmd(pmd, pmd_k);
@@ -460,15 +472,10 @@
 	 * defines these to be "precise" aborts.
 	 */
 	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
-/* Do we need runtime check ? */
-#if __LINUX_ARM_ARCH__ < 6
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-#else
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"I-cache maintenance fault"	   },
-#endif
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
@@ -505,13 +512,15 @@
 
 void __init
 hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		int sig, const char *name)
+		int sig, int code, const char *name)
 {
-	if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
-		fsr_info[nr].fn   = fn;
-		fsr_info[nr].sig  = sig;
-		fsr_info[nr].name = name;
-	}
+	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
+		BUG();
+
+	fsr_info[nr].fn   = fn;
+	fsr_info[nr].sig  = sig;
+	fsr_info[nr].code = code;
+	fsr_info[nr].name = name;
 }
 
 /*
@@ -591,3 +600,25 @@
 	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+static int __init exceptions_init(void)
+{
+	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
+		hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR,
+				"I-cache maintenance fault");
+	}
+
+	if (cpu_architecture() >= CPU_ARCH_ARMv7) {
+		/*
+		 * TODO: Access flag faults introduced in ARMv6K.
+		 * Runtime check for 'K' extension is needed
+		 */
+		hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+		hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+	}
+
+	return 0;
+}
+
+arch_initcall(exceptions_init);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 77b030f..6ab2440 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -48,7 +48,16 @@
 
 	debug_kmap_atomic(type);
 
-	kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * There is no cache coherency issue when non VIVT, so force the
+	 * dedicated kmap usage for better debugging purposes in that case.
+	 */
+	if (!cache_is_vivt())
+		kmap = NULL;
+	else
+#endif
+		kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
 
@@ -154,19 +163,22 @@
 
 void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
 {
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+	unsigned int idx, cpu;
+	int *depth;
 	unsigned long vaddr, flags;
 	pte_t pte, *ptep;
 
+	if (!in_interrupt())
+		preempt_disable();
+
+	cpu = smp_processor_id();
+	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+
 	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	ptep = TOP_PTE(vaddr);
 	pte = mk_pte(page, kmap_prot);
 
-	if (!in_interrupt())
-		preempt_disable();
-
 	raw_local_irq_save(flags);
 	(*depth)++;
 	if (pte_val(*ptep) == pte_val(pte)) {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 1ba6cf5..7185b00 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/initrd.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
@@ -79,38 +80,37 @@
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, node, i;
+	int shared = 0, cached = 0, slab = 0, i;
 	struct meminfo * mi = &meminfo;
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	for_each_online_node(node) {
-		for_each_nodebank (i,mi,node) {
-			struct membank *bank = &mi->bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
 
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
+	for_each_bank (i, mi) {
+		struct membank *bank = &mi->bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
 
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
 
-			do {
-				total++;
-				if (PageReserved(page))
-					reserved++;
-				else if (PageSwapCache(page))
-					cached++;
-				else if (PageSlab(page))
-					slab++;
-				else if (!page_count(page))
-					free++;
-				else
-					shared += page_count(page) - 1;
-				page++;
-			} while (page < end);
-		}
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (PageSlab(page))
+				slab++;
+			else if (!page_count(page))
+				free++;
+			else
+				shared += page_count(page) - 1;
+			page++;
+		} while (page < end);
 	}
 
 	printk("%d pages of RAM\n", total);
@@ -121,7 +121,7 @@
 	printk("%d pages swap cached\n", cached);
 }
 
-static void __init find_node_limits(int node, struct meminfo *mi,
+static void __init find_limits(struct meminfo *mi,
 	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
 {
 	int i;
@@ -129,7 +129,7 @@
 	*min = -1UL;
 	*max_low = *max_high = 0;
 
-	for_each_nodebank(i, mi, node) {
+	for_each_bank (i, mi) {
 		struct membank *bank = &mi->bank[i];
 		unsigned long start, end;
 
@@ -147,155 +147,64 @@
 	}
 }
 
-/*
- * FIXME: We really want to avoid allocating the bootmap bitmap
- * over the top of the initrd.  Hopefully, this is located towards
- * the start of a bank, so if we allocate the bootmap bitmap at
- * the end, we won't clash.
- */
-static unsigned int __init
-find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
-{
-	unsigned int start_pfn, i, bootmap_pfn;
-
-	start_pfn   = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
-	bootmap_pfn = 0;
-
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		unsigned int start, end;
-
-		start = bank_pfn_start(bank);
-		end   = bank_pfn_end(bank);
-
-		if (end < start_pfn)
-			continue;
-
-		if (start < start_pfn)
-			start = start_pfn;
-
-		if (end <= start)
-			continue;
-
-		if (end - start >= bootmap_pages) {
-			bootmap_pfn = start;
-			break;
-		}
-	}
-
-	if (bootmap_pfn == 0)
-		BUG();
-
-	return bootmap_pfn;
-}
-
-static int __init check_initrd(struct meminfo *mi)
-{
-	int initrd_node = -2;
-#ifdef CONFIG_BLK_DEV_INITRD
-	unsigned long end = phys_initrd_start + phys_initrd_size;
-
-	/*
-	 * Make sure that the initrd is within a valid area of
-	 * memory.
-	 */
-	if (phys_initrd_size) {
-		unsigned int i;
-
-		initrd_node = -1;
-
-		for (i = 0; i < mi->nr_banks; i++) {
-			struct membank *bank = &mi->bank[i];
-			if (bank_phys_start(bank) <= phys_initrd_start &&
-			    end <= bank_phys_end(bank))
-				initrd_node = bank->node;
-		}
-	}
-
-	if (initrd_node == -1) {
-		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
-		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, phys_initrd_size);
-		phys_initrd_start = phys_initrd_size = 0;
-	}
-#endif
-
-	return initrd_node;
-}
-
-static void __init bootmem_init_node(int node, struct meminfo *mi,
+static void __init arm_bootmem_init(struct meminfo *mi,
 	unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long boot_pfn;
 	unsigned int boot_pages;
+	phys_addr_t bitmap;
 	pg_data_t *pgdat;
 	int i;
 
 	/*
-	 * Allocate the bootmem bitmap page.
+	 * Allocate the bootmem bitmap page.  This must be in a region
+	 * of memory which has already been mapped.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+				__pfn_to_phys(end_pfn));
 
 	/*
-	 * Initialise the bootmem allocator for this node, handing the
+	 * Initialise the bootmem allocator, handing the
 	 * memory banks over to bootmem.
 	 */
-	node_set_online(node);
-	pgdat = NODE_DATA(node);
-	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+	node_set_online(0);
+	pgdat = NODE_DATA(0);
+	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
 
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		struct membank *bank = &mi->bank[i];
 		if (!bank->highmem)
-			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+			free_bootmem(bank_phys_start(bank), bank_phys_size(bank));
 	}
 
 	/*
-	 * Reserve the bootmem bitmap for this node.
+	 * Reserve the memblock reserved regions in bootmem.
 	 */
-	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
-			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-}
-
-static void __init bootmem_reserve_initrd(int node)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	pg_data_t *pgdat = NODE_DATA(node);
-	int res;
-
-	res = reserve_bootmem_node(pgdat, phys_initrd_start,
-			     phys_initrd_size, BOOTMEM_EXCLUSIVE);
-
-	if (res == 0) {
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	} else {
-		printk(KERN_ERR
-			"INITRD: 0x%08lx+0x%08lx overlaps in-use "
-			"memory region - disabling initrd\n",
-			phys_initrd_start, phys_initrd_size);
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		phys_addr_t start = memblock_start_pfn(&memblock.reserved, i);
+		if (start >= start_pfn &&
+		    memblock_end_pfn(&memblock.reserved, i) <= end_pfn)
+			reserve_bootmem_node(pgdat, __pfn_to_phys(start),
+				memblock_size_bytes(&memblock.reserved, i),
+				BOOTMEM_DEFAULT);
 	}
-#endif
 }
 
-static void __init bootmem_free_node(int node, struct meminfo *mi)
+static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
+	unsigned long max_low, unsigned long max_high)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long min, max_low, max_high;
 	int i;
 
-	find_node_limits(node, mi, &min, &max_low, &max_high);
-
 	/*
-	 * initialise the zones within this node.
+	 * initialise the zones.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
 
 	/*
-	 * The size of this node has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory to the
-	 * zones, now is the time to do it.
+	 * The memory size has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory
+	 * to the zones, now is the time to do it.
 	 */
 	zone_size[0] = max_low - min;
 #ifdef CONFIG_HIGHMEM
@@ -303,11 +212,11 @@
 #endif
 
 	/*
-	 * For each bank in this node, calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes_in_node)
+	 * Calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes)
 	 */
 	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		int idx = 0;
 #ifdef CONFIG_HIGHMEM
 		if (mi->bank[i].highmem)
@@ -320,24 +229,23 @@
 	 * Adjust the sizes according to any special requirements for
 	 * this machine type.
 	 */
-	arch_adjust_zones(node, zone_size, zhole_size);
+	arch_adjust_zones(zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, min, zhole_size);
+	free_area_init_node(0, zone_size, min, zhole_size);
 }
 
 #ifndef CONFIG_SPARSEMEM
 int pfn_valid(unsigned long pfn)
 {
-	struct meminfo *mi = &meminfo;
-	unsigned int left = 0, right = mi->nr_banks;
+	struct memblock_region *mem = &memblock.memory;
+	unsigned int left = 0, right = mem->cnt;
 
 	do {
 		unsigned int mid = (right + left) / 2;
-		struct membank *bank = &mi->bank[mid];
 
-		if (pfn < bank_pfn_start(bank))
+		if (pfn < memblock_start_pfn(mem, mid))
 			right = mid;
-		else if (pfn >= bank_pfn_end(bank))
+		else if (pfn >= memblock_end_pfn(mem, mid))
 			left = mid + 1;
 		else
 			return 1;
@@ -346,73 +254,69 @@
 }
 EXPORT_SYMBOL(pfn_valid);
 
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
 	int i;
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
-	}
+	for (i = 0; i < memblock.memory.cnt; i++)
+		memory_present(0, memblock_start_pfn(&memblock.memory, i),
+				  memblock_end_pfn(&memblock.memory, i));
 }
 #endif
 
+void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	int i;
+
+	memblock_init();
+	for (i = 0; i < mi->nr_banks; i++)
+		memblock_add(mi->bank[i].start, mi->bank[i].size);
+
+	/* Register the kernel text, kernel data and initrd with memblock. */
+#ifdef CONFIG_XIP_KERNEL
+	memblock_reserve(__pa(_data), _end - _data);
+#else
+	memblock_reserve(__pa(_stext), _end - _stext);
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
+
+		/* Now convert initrd to virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
+
+	arm_mm_memblock_reserve();
+
+	/* reserve any platform specific memblock areas */
+	if (mdesc->reserve)
+		mdesc->reserve();
+
+	memblock_analyze();
+	memblock_dump_all();
+}
+
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
-	int node, initrd_node;
-
-	/*
-	 * Locate which node contains the ramdisk image, if any.
-	 */
-	initrd_node = check_initrd(mi);
 
 	max_low = max_high = 0;
 
+	find_limits(mi, &min, &max_low, &max_high);
+
+	arm_bootmem_init(mi, min, max_low);
+
 	/*
-	 * Run through each node initialising the bootmem allocator.
+	 * Sparsemem tries to allocate bootmem in memory_present(),
+	 * so must be done after the fixed reservations
 	 */
-	for_each_node(node) {
-		unsigned long node_low, node_high;
-
-		find_node_limits(node, mi, &min, &node_low, &node_high);
-
-		if (node_low > max_low)
-			max_low = node_low;
-		if (node_high > max_high)
-			max_high = node_high;
-
-		/*
-		 * If there is no memory in this node, ignore it.
-		 * (We can't have nodes which have no lowmem)
-		 */
-		if (node_low == 0)
-			continue;
-
-		bootmem_init_node(node, mi, min, node_low);
-
-		/*
-		 * Reserve any special node zero regions.
-		 */
-		if (node == 0)
-			reserve_node_zero(NODE_DATA(node));
-
-		/*
-		 * If the initrd is in this node, reserve its memory.
-		 */
-		if (node == initrd_node)
-			bootmem_reserve_initrd(node);
-
-		/*
-		 * Sparsemem tries to allocate bootmem in memory_present(),
-		 * so must be done after the fixed reservations
-		 */
-		arm_memory_present(mi, node);
-	}
+	arm_memory_present();
 
 	/*
 	 * sparse_init() needs the bootmem allocator up and running.
@@ -420,12 +324,11 @@
 	sparse_init();
 
 	/*
-	 * Now free memory in each node - free_area_init_node needs
+	 * Now free the memory - free_area_init_node needs
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
-	for_each_node(node)
-		bootmem_free_node(node, mi);
+	arm_bootmem_free(mi, min, max_low, max_high);
 
 	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
@@ -460,7 +363,7 @@
 }
 
 static inline void
-free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct page *start_pg, *end_pg;
 	unsigned long pg, pgend;
@@ -483,40 +386,39 @@
 	 * free the section of the memmap array.
 	 */
 	if (pg < pgend)
-		free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+		free_bootmem(pg, pgend - pg);
 }
 
 /*
  * The mem_map array can get very big.  Free the unused area of the memory map.
  */
-static void __init free_unused_memmap_node(int node, struct meminfo *mi)
+static void __init free_unused_memmap(struct meminfo *mi)
 {
 	unsigned long bank_start, prev_bank_end = 0;
 	unsigned int i;
 
 	/*
-	 * [FIXME] This relies on each bank being in address order.  This
-	 * may not be the case, especially if the user has provided the
-	 * information on the command line.
+	 * This relies on each bank being in address order.
+	 * The banks are sorted previously in bootmem_init().
 	 */
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		struct membank *bank = &mi->bank[i];
 
 		bank_start = bank_pfn_start(bank);
-		if (bank_start < prev_bank_end) {
-			printk(KERN_ERR "MEM: unordered memory banks.  "
-				"Not freeing memmap.\n");
-			break;
-		}
 
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
 		 */
-		if (prev_bank_end && prev_bank_end != bank_start)
-			free_memmap(node, prev_bank_end, bank_start);
+		if (prev_bank_end && prev_bank_end < bank_start)
+			free_memmap(prev_bank_end, bank_start);
 
-		prev_bank_end = bank_pfn_end(bank);
+		/*
+		 * Align up here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank end aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
 	}
 }
 
@@ -528,21 +430,19 @@
 void __init mem_init(void)
 {
 	unsigned long reserved_pages, free_pages;
-	int i, node;
-
-#ifndef CONFIG_DISCONTIGMEM
-	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+	int i;
+#ifdef CONFIG_HAVE_TCM
+	/* These pointers are filled in on TCM detection */
+	extern u32 dtcm_end;
+	extern u32 itcm_end;
 #endif
 
+	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+
 	/* this will put all unused low memory onto the freelists */
-	for_each_online_node(node) {
-		pg_data_t *pgdat = NODE_DATA(node);
+	free_unused_memmap(&meminfo);
 
-		free_unused_memmap_node(node, &meminfo);
-
-		if (pgdat->node_spanned_pages != 0)
-			totalram_pages += free_all_bootmem_node(pgdat);
-	}
+	totalram_pages += free_all_bootmem();
 
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
@@ -552,39 +452,35 @@
 
 #ifdef CONFIG_HIGHMEM
 	/* set highmem page free */
-	for_each_online_node(node) {
-		for_each_nodebank (i, &meminfo, node) {
-			unsigned long start = bank_pfn_start(&meminfo.bank[i]);
-			unsigned long end = bank_pfn_end(&meminfo.bank[i]);
-			if (start >= max_low_pfn + PHYS_PFN_OFFSET)
-				totalhigh_pages += free_area(start, end, NULL);
-		}
+	for_each_bank (i, &meminfo) {
+		unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+		unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+		if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+			totalhigh_pages += free_area(start, end, NULL);
 	}
 	totalram_pages += totalhigh_pages;
 #endif
 
 	reserved_pages = free_pages = 0;
 
-	for_each_online_node(node) {
-		for_each_nodebank(i, &meminfo, node) {
-			struct membank *bank = &meminfo.bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
+	for_each_bank(i, &meminfo) {
+		struct membank *bank = &meminfo.bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
 
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
 
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
 
-			do {
-				if (PageReserved(page))
-					reserved_pages++;
-				else if (!page_count(page))
-					free_pages++;
-				page++;
-			} while (page < end);
-		}
+		do {
+			if (PageReserved(page))
+				reserved_pages++;
+			else if (!page_count(page))
+				free_pages++;
+			page++;
+		} while (page < end);
 	}
 
 	/*
@@ -611,6 +507,10 @@
 
 	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
 			"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_HAVE_TCM
+			"    DTCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+			"    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#endif
 			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #ifdef CONFIG_MMU
 			"    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
@@ -627,6 +527,10 @@
 
 			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
 				(PAGE_SIZE)),
+#ifdef CONFIG_HAVE_TCM
+			MLK(DTCM_OFFSET, (unsigned long) dtcm_end),
+			MLK(ITCM_OFFSET, (unsigned long) itcm_end),
+#endif
 			MLK(FIXADDR_START, FIXADDR_TOP),
 #ifdef CONFIG_MMU
 			MLM(CONSISTENT_BASE, CONSISTENT_END),
@@ -678,10 +582,10 @@
 void free_initmem(void)
 {
 #ifdef CONFIG_HAVE_TCM
-	extern char *__tcm_start, *__tcm_end;
+	extern char __tcm_start, __tcm_end;
 
-	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
-				    __phys_to_pfn(__pa(__tcm_end)),
+	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 28c8b95..ab50627 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -42,78 +42,11 @@
  */
 #define VM_ARM_SECTION_MAPPING	0x80000000
 
-static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
-			  unsigned long phys_addr, const struct mem_type *type)
-{
-	pgprot_t prot = __pgprot(type->prot_pte);
-	pte_t *pte;
-
-	pte = pte_alloc_kernel(pmd, addr);
-	if (!pte)
-		return -ENOMEM;
-
-	do {
-		if (!pte_none(*pte))
-			goto bad;
-
-		set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
-		phys_addr += PAGE_SIZE;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-	return 0;
-
- bad:
-	printk(KERN_CRIT "remap_area_pte: page already exists\n");
-	BUG();
-}
-
-static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr,
-				 unsigned long end, unsigned long phys_addr,
-				 const struct mem_type *type)
-{
-	unsigned long next;
-	pmd_t *pmd;
-	int ret = 0;
-
-	pmd = pmd_alloc(&init_mm, pgd, addr);
-	if (!pmd)
-		return -ENOMEM;
-
-	do {
-		next = pmd_addr_end(addr, end);
-		ret = remap_area_pte(pmd, addr, next, phys_addr, type);
-		if (ret)
-			return ret;
-		phys_addr += next - addr;
-	} while (pmd++, addr = next, addr != end);
-	return ret;
-}
-
-static int remap_area_pages(unsigned long start, unsigned long pfn,
-			    size_t size, const struct mem_type *type)
-{
-	unsigned long addr = start;
-	unsigned long next, end = start + size;
-	unsigned long phys_addr = __pfn_to_phys(pfn);
-	pgd_t *pgd;
-	int err = 0;
-
-	BUG_ON(addr >= end);
-	pgd = pgd_offset_k(addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		err = remap_area_pmd(pgd, addr, next, phys_addr, type);
-		if (err)
-			break;
-		phys_addr += next - addr;
-	} while (pgd++, addr = next, addr != end);
-
-	return err;
-}
-
 int ioremap_page(unsigned long virt, unsigned long phys,
 		 const struct mem_type *mtype)
 {
-	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
+				  __pgprot(mtype->prot_pte));
 }
 EXPORT_SYMBOL(ioremap_page);
 
@@ -268,6 +201,12 @@
 	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
 		return NULL;
 
+	/*
+	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
+	 */
+	if (WARN_ON(pfn_valid(pfn)))
+		return NULL;
+
 	type = get_mem_type(mtype);
 	if (!type)
 		return NULL;
@@ -294,7 +233,8 @@
 		err = remap_area_sections(addr, pfn, size, type);
 	} else
 #endif
-		err = remap_area_pages(addr, pfn, size, type);
+		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+					 __pgprot(type->prot_pte));
 
 	if (err) {
  		vunmap((void *)addr);
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 815d08e..6630620 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -28,7 +28,5 @@
 
 #endif
 
-struct pglist_data;
-
 void __init bootmem_init(void);
-void reserve_node_zero(struct pglist_data *pgdat);
+void arm_mm_memblock_reserve(void);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f5abc51..4f5b396 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
 #include <linux/shm.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <asm/cputype.h>
 #include <asm/system.h>
 
@@ -80,6 +81,9 @@
 	        start_addr = addr = TASK_UNMAPPED_BASE;
 	        mm->cached_hole_size = 0;
 	}
+	/* 8 bits of randomness in 20 address space bits */
+	if (current->flags & PF_RANDOMIZE)
+		addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
 	if (do_align)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 2858941..6e1c4f6 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -11,13 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
+#include <linux/memblock.h>
 #include <linux/sort.h>
 
 #include <asm/cputype.h>
-#include <asm/mach-types.h>
 #include <asm/sections.h>
 #include <asm/cachetype.h>
 #include <asm/setup.h>
@@ -258,6 +257,19 @@
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_DTCM] = {
+		.prot_pte	= L_PTE_PRESENT | L_PTE_YOUNG |
+		                  L_PTE_DIRTY | L_PTE_WRITE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PMD_TYPE_SECT | PMD_SECT_XN,
+		.domain		= DOMAIN_KERNEL,
+	},
+	[MT_MEMORY_ITCM] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_IO,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -488,18 +500,28 @@
 
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
+static void __init *early_alloc(unsigned long sz)
+{
+	void *ptr = __va(memblock_alloc(sz, sz));
+	memset(ptr, 0, sz);
+	return ptr;
+}
+
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t));
+		__pmd_populate(pmd, __pa(pte) | prot);
+	}
+	BUG_ON(pmd_bad(*pmd));
+	return pte_offset_kernel(pmd, addr);
+}
+
 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 				  unsigned long end, unsigned long pfn,
 				  const struct mem_type *type)
 {
-	pte_t *pte;
-
-	if (pmd_none(*pmd)) {
-		pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-		__pmd_populate(pmd, __pa(pte) | type->prot_l1);
-	}
-
-	pte = pte_offset_kernel(pmd, addr);
+	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 	do {
 		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 		pfn++;
@@ -668,7 +690,7 @@
 		create_mapping(io_desc + i);
 }
 
-static unsigned long __initdata vmalloc_reserve = SZ_128M;
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
 
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
@@ -677,7 +699,7 @@
  */
 static int __init early_vmalloc(char *arg)
 {
-	vmalloc_reserve = memparse(arg, NULL);
+	unsigned long vmalloc_reserve = memparse(arg, NULL);
 
 	if (vmalloc_reserve < SZ_16M) {
 		vmalloc_reserve = SZ_16M;
@@ -692,22 +714,26 @@
 			"vmalloc area is too big, limiting to %luMB\n",
 			vmalloc_reserve >> 20);
 	}
+
+	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 	return 0;
 }
 early_param("vmalloc", early_vmalloc);
 
-#define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
+phys_addr_t lowmem_end_addr;
 
 static void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
+	lowmem_end_addr = __pa(vmalloc_min - 1) + 1;
+
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
-		if (__va(bank->start) > VMALLOC_MIN ||
+		if (__va(bank->start) > vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET)
 			highmem = 1;
 
@@ -717,8 +743,8 @@
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
 		 */
-		if (__va(bank->start) < VMALLOC_MIN &&
-		    bank->size > VMALLOC_MIN - __va(bank->start)) {
+		if (__va(bank->start) < vmalloc_min &&
+		    bank->size > vmalloc_min - __va(bank->start)) {
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
@@ -727,12 +753,12 @@
 					(meminfo.nr_banks - i) * sizeof(*bank));
 				meminfo.nr_banks++;
 				i++;
-				bank[1].size -= VMALLOC_MIN - __va(bank->start);
-				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].size -= vmalloc_min - __va(bank->start);
+				bank[1].start = __pa(vmalloc_min - 1) + 1;
 				bank[1].highmem = highmem = 1;
 				j++;
 			}
-			bank->size = VMALLOC_MIN - __va(bank->start);
+			bank->size = vmalloc_min - __va(bank->start);
 		}
 #else
 		bank->highmem = highmem;
@@ -741,7 +767,7 @@
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start) >= VMALLOC_MIN ||
+		if (__va(bank->start) >= vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
@@ -753,9 +779,9 @@
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+		if (__va(bank->start + bank->size) > vmalloc_min ||
 		    __va(bank->start + bank->size) < __va(bank->start)) {
-			unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
 			       "to -%.8lx (vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1,
@@ -827,101 +853,23 @@
 }
 
 /*
- * Reserve the various regions of node 0
+ * Reserve the special regions of memory
  */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
-	unsigned long res_size = 0;
-
-	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
 	/*
 	 * Reserve the page tables.  These are already in use,
 	 * and can only be in node 0.
 	 */
-	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
-			     PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT);
-
-	/*
-	 * Hmm... This should go elsewhere, but we really really need to
-	 * stop things allocating the low memory; ideally we need a better
-	 * implementation of GFP_DMA which does not assume that DMA-able
-	 * memory starts at zero.
-	 */
-	if (machine_is_integrator() || machine_is_cintegrator())
-		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen memory region at the start of main system memory.
-	 */
-	if (machine_is_edb7211())
-		res_size = 0x00020000;
-	if (machine_is_p720t())
-		res_size = 0x00014000;
-
-	/* H1940, RX3715 and RX1950 need to reserve this for suspend */
-
-	if (machine_is_h1940() || machine_is_rx3715()
-		|| machine_is_rx1950()) {
-		reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
-				BOOTMEM_DEFAULT);
-		reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
-				BOOTMEM_DEFAULT);
-	}
-
-	if (machine_is_palmld() || machine_is_palmtx()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_treo680() || machine_is_centro()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_palmt5())
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-
-	/*
-	 * U300 - This platform family can share physical memory
-	 * between two ARM cpus, one running Linux and the other
-	 * running another OS.
-	 */
-	if (machine_is_u300()) {
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
-	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-		res_size = 0x00100000;
-#endif
-#endif
-	}
+	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
 
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
 	 * precious DMA-able memory...
 	 */
-	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 #endif
-	if (res_size)
-		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size,
-				BOOTMEM_DEFAULT);
 }
 
 /*
@@ -940,7 +888,7 @@
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1011,11 +959,8 @@
 static void __init kmap_init(void)
 {
 #ifdef CONFIG_HIGHMEM
-	pmd_t *pmd = pmd_off_k(PKMAP_BASE);
-	pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-	BUG_ON(!pmd_none(*pmd) || !pte);
-	__pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
-	pkmap_page_table = pte + PTRS_PER_PTE;
+	pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
+		PKMAP_BASE, _PAGE_KERNEL_TABLE);
 #endif
 }
 
@@ -1066,17 +1011,16 @@
 	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
-	bootmem_init();
 	devicemaps_init(mdesc);
 	kmap_init();
 
 	top_pmd = pmd_off_k(0xffff0000);
 
-	/*
-	 * allocate the zero page.  Note that this always succeeds and
-	 * returns a zeroed result.
-	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	/* allocate the zero page. */
+	zero_page = early_alloc(PAGE_SIZE);
+
+	bootmem_init();
+
 	empty_zero_page = virt_to_page(zero_page);
 	__flush_dcache_page(NULL, empty_zero_page);
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 33b3273..687d023 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -6,8 +6,8 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
@@ -17,30 +17,14 @@
 
 #include "mm.h"
 
-/*
- * Reserve the various regions of node 0
- */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
 	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/*
 	 * Register the exception vector page.
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE,
-			BOOTMEM_DEFAULT);
+	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
 /*
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 72507c6..203a4e9 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -79,15 +79,11 @@
  * cpu_arm1020_proc_fin()
  */
 ENTRY(cpu_arm1020_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020_reset(loc)
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index d278298..1a511e7 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -79,15 +79,11 @@
  * cpu_arm1020e_proc_fin()
  */
 ENTRY(cpu_arm1020e_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020e_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020e_reset(loc)
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index ce13e4a..1ffa4eb 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -68,15 +68,11 @@
  * cpu_arm1022_proc_fin()
  */
 ENTRY(cpu_arm1022_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1022_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1022_reset(loc)
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 636672a..5697c34b 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -68,15 +68,11 @@
  * cpu_arm1026_proc_fin()
  */
 ENTRY(cpu_arm1026_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1026_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1026_reset(loc)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 795dc61..64e0b32 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -184,8 +184,6 @@
 
 ENTRY(cpu_arm6_proc_fin)
 ENTRY(cpu_arm7_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	r0, #0x31			@ ....S..DP...M
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 		mov	pc, lr
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 0b62de2..9d96824 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -54,15 +54,11 @@
 		mov	pc, lr
 
 ENTRY(cpu_arm720_proc_fin)
-		stmfd	sp!, {lr}
-		mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, ip
 		mrc	p15, 0, r0, c1, c0, 0
 		bic	r0, r0, #0x1000			@ ...i............
 		bic	r0, r0, #0x000e			@ ............wca.
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
-		ldmfd	sp!, {pc}
+		mov	pc, lr
 
 /*
  * Function: arm720_proc_do_idle(void)
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 01860cd..6c1a9ab 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -36,15 +36,11 @@
  * cpu_arm740_proc_fin()
  */
 ENTRY(cpu_arm740_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
 	bic	r0, r0, #0x0000000c		@ w-buffer/cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mcr	p15, 0, r0, c7, c0, 0		@ invalidate cache
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm740_reset(loc)
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 1201b98..6a850db 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -36,8 +36,6 @@
  * cpu_arm7tdmi_proc_fin()
  */
 ENTRY(cpu_arm7tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 8be8199..86f80aa 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -69,19 +69,11 @@
  * cpu_arm920_proc_fin()
  */
 ENTRY(cpu_arm920_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm920_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm920_reset(loc)
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index c0ff8e4..f76ce9b 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -71,19 +71,11 @@
  * cpu_arm922_proc_fin()
  */
 ENTRY(cpu_arm922_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm922_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm922_reset(loc)
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 3c6cffe..657bd3f 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -92,15 +92,11 @@
  * cpu_arm925_proc_fin()
  */
 ENTRY(cpu_arm925_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm925_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm925_reset(loc)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 75b707c..73f1f3c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -61,15 +61,11 @@
  * cpu_arm926_proc_fin()
  */
 ENTRY(cpu_arm926_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm926_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm926_reset(loc)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1af1657..fffb061 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -37,15 +37,11 @@
  * cpu_arm940_proc_fin()
  */
 ENTRY(cpu_arm940_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm940_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm940_reset(loc)
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 1664b6a..249a605 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -44,15 +44,11 @@
  * cpu_arm946_proc_fin()
  */
 ENTRY(cpu_arm946_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm946_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm946_reset(loc)
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 28545c2..db475667 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -36,8 +36,6 @@
  * cpu_arm9tdmi_proc_fin()
  */
 ENTRY(cpu_arm9tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08f5ac2..7803fdf 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -39,17 +39,13 @@
  * cpu_fa526_proc_fin()
  */
 ENTRY(cpu_fa526_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	fa_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	nop
 	nop
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_fa526_reset(loc)
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 53e6323..b304d01 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -75,11 +75,6 @@
  * cpu_feroceon_proc_fin()
  */
 ENTRY(cpu_feroceon_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	feroceon_flush_kern_cache_all
-
 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
 	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r0, #0
@@ -91,7 +86,7 @@
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_feroceon_reset(loc)
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index caa3115..5f6892f 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -51,15 +51,11 @@
  * cpu_mohawk_proc_fin()
  */
 ENTRY(cpu_mohawk_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	mohawk_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...iz...........
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_mohawk_reset(loc)
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 7b706b3..a201eb0 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -44,17 +44,13 @@
  * cpu_sa110_proc_fin()
  */
 ENTRY(cpu_sa110_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all	@ clean caches
-1:	mov	r0, #0
+	mov	r0, #0
 	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa110_reset(loc)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 5c47760..7ddc480 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -55,16 +55,12 @@
  *  - Clean and turn off caches.
  */
 ENTRY(cpu_sa1100_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all
 	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa1100_reset(loc)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7a5337e..22aac851 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -42,14 +42,11 @@
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v6_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  *	cpu_v6_reset(loc)
@@ -239,7 +236,8 @@
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+	/* See also feat_v6_fixup() for HWCAP_TLS */
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
 	.long	cpu_v6_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
@@ -262,7 +260,7 @@
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_pj4_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7aaf88a..6a8506d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -45,14 +45,11 @@
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v7_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -344,7 +341,7 @@
 	b	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index e5797f1..361a51e 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -90,15 +90,11 @@
  * cpu_xsc3_proc_fin()
  */
 ENTRY(cpu_xsc3_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xsc3_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xsc3_reset(loc)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 63037e2..1407597 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -124,15 +124,11 @@
  * cpu_xscale_proc_fin()
  */
 ENTRY(cpu_xscale_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xscale_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xscale_reset(loc)
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
index 19e09bdb..935993e 100644
--- a/arch/arm/mm/vmregion.c
+++ b/arch/arm/mm/vmregion.c
@@ -35,7 +35,8 @@
  */
 
 struct arm_vmregion *
-arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
+		   size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -58,7 +59,7 @@
 			goto nospc;
 		if ((addr + size) <= c->vm_start)
 			goto found;
-		addr = c->vm_end;
+		addr = ALIGN(c->vm_end, align);
 		if (addr > end)
 			goto nospc;
 	}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index 6b2cdbd..15e9f04 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -21,7 +21,7 @@
 	int			vm_active;
 };
 
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t);
 struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
 struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
 void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index ce31f31..43f2b15 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -359,7 +359,7 @@
 	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
 	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
 
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
 }
 
 /* for platforms that might be host-bus-adapters */
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6c8a02a..85d3e55 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -29,6 +29,11 @@
 #include <mach/time.h>
 
 /*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define IOP_MIN_RANGE 4
+
+/*
  * IOP clocksource (free-running timer 1).
  */
 static cycle_t iop_clocksource_read(struct clocksource *unused)
@@ -44,27 +49,6 @@
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, hz);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-
-	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
-	       cs->name, cs->shift, cs->mult);
-}
-
 /*
  * IOP sched_clock() implementation via its clocksource.
  */
@@ -130,27 +114,6 @@
 	.set_mode	= iop_set_mode,
 };
 
-static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) hz << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	ce->shift = shift;
-	ce->mult = (u32) temp;
-
-	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
-	       ce->name, ce->shift, ce->mult);
-}
-
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
@@ -190,7 +153,8 @@
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	clockevents_calc_mult_shift(&iop_clockevent,
+				    tick_rate, IOP_MIN_RANGE);
 	iop_clockevent.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
 	iop_clockevent.min_delta_ns =
@@ -207,6 +171,7 @@
 	write_trr1(0xffffffff);
 	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
+				    IOP_MIN_RANGE);
 	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
new file mode 100644
index 0000000..639c54a
--- /dev/null
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/hardware.h>
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n)	(n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n)	(n + 0x8000)
+#define UARTB_BASE_ADDR(n)	(n + 0x10000)
+
+#define BOARD_IO_ADDR(n)	(n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG		0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG	0x08
+/* status, interrupt */
+#define INTR_STATUS_REG	0x10
+#define INTR_MASK_REG		0x38
+#define INTR_RESET_REG		0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG	0x40
+#define MAGIC_NUMBER2_REG	0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG	0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG	0x58
+/* module reset register*/
+#define MODULE_RESET_REG	0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG	0x68
+
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_GPIO(irq)	((irq) - MXC_INTERNAL_IRQS)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET		(MXC_BOARD_IRQ_START + 0)
+#define EXPIO_INT_XUART_A	(MXC_BOARD_IRQ_START + 1)
+#define EXPIO_INT_XUART_B	(MXC_BOARD_IRQ_START + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_BOARD_IRQ_START + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_BOARD_IRQ_START + 4)
+
+static void __iomem *brd_io;
+static void expio_ack_irq(u32 irq);
+
+static struct resource smsc911x_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	} , {
+		.start = EXPIO_INT_ENET,
+		.end = EXPIO_INT_ENET,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	desc->chip->mask(irq);	/* irq = gpio irq number */
+
+	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_BOARD_IRQ_START;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		struct irq_desc *d;
+		if ((int_valid & 1) == 0)
+			continue;
+		d = irq_desc + expio_irq;
+		if (unlikely(!(d->handle_irq)))
+			pr_err("\nEXPIO irq: %d unhandled\n", expio_irq);
+		else
+			d->handle_irq(expio_irq, d);
+	}
+
+	desc->chip->ack(irq);
+	desc->chip->unmask(irq);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg |= (1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	expio_mask_irq(irq);
+}
+
+static void expio_unmask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+int __init mxc_expio_init(u32 base, u32 p_irq)
+{
+	int i;
+
+	brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+	if (brd_io == NULL)
+		return -ENOMEM;
+
+	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		pr_info("3-Stack Debug board not detected\n");
+		iounmap(brd_io);
+		brd_io = NULL;
+		return -ENODEV;
+	}
+
+	pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+		readw(brd_io + CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
+	gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0, brd_io + INTR_MASK_REG);
+	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+	set_irq_chained_handler(p_irq, mxc_expio_irq_handler);
+
+	/* Register Lan device on the debugboard */
+	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+	platform_device_register(&smsc_lan9217_device);
+
+	return 0;
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 7f7ad6f2..0527e65 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -1,5 +1,7 @@
 if ARCH_MXC
 
+source "arch/arm/plat-mxc/devices/Kconfig"
+
 menu "Freescale MXC Implementations"
 
 choice
@@ -8,15 +10,12 @@
 
 config ARCH_MX1
 	bool "MX1-based"
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
+	select SOC_IMX1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
-	select CPU_ARM926T
-	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
@@ -25,6 +24,7 @@
 	select CPU_ARM926T
 	select ARCH_MXC_IOMUX_V3
 	select HAVE_FB_IMX
+	select ARCH_MXC_AUDMUX_V2
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
@@ -48,8 +48,7 @@
 
 endchoice
 
-source "arch/arm/mach-mx1/Kconfig"
-source "arch/arm/mach-mx2/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
@@ -81,6 +80,17 @@
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
 config MXC_ULPI
 	bool
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 895bc3c..78d405e 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -8,8 +8,6 @@
 # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 
-obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
@@ -17,7 +15,10 @@
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index b62917c..1180bef 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 0c2cc5c..f9e7cdb 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -191,6 +187,7 @@
 {
 	int ret;
 
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31())
 		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
 
@@ -204,7 +201,19 @@
 		}
 		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
-
+#endif
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
+	}
+#endif
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 323ff8c..2ed3ab1 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -52,13 +52,14 @@
 {
 	if (clk == NULL || IS_ERR(clk))
 		return;
-
-	__clk_disable(clk->parent);
-	__clk_disable(clk->secondary);
-
 	WARN_ON(!clk->usecount);
-	if (!(--clk->usecount) && clk->disable)
-		clk->disable(clk);
+
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		__clk_disable(clk->parent);
+		__clk_disable(clk->secondary);
+	}
 }
 
 static int __clk_enable(struct clk *clk)
@@ -66,12 +67,13 @@
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	__clk_enable(clk->parent);
-	__clk_enable(clk->secondary);
+	if (clk->usecount++ == 0) {
+		__clk_enable(clk->parent);
+		__clk_enable(clk->secondary);
 
-	if (clk->usecount++ == 0 && clk->enable)
-		clk->enable(clk);
-
+		if (clk->enable)
+			clk->enable(clk);
+	}
 	return 0;
 }
 
@@ -160,17 +162,28 @@
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	int ret = -EINVAL;
+	struct clk *old;
 
 	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
 	    IS_ERR(parent) || clk->set_parent == NULL)
 		return ret;
 
+	if (clk->usecount)
+		clk_enable(parent);
+
 	mutex_lock(&clocks_mutex);
 	ret = clk->set_parent(clk, parent);
-	if (ret == 0)
+	if (ret == 0) {
+		old = clk->parent;
 		clk->parent = parent;
+	} else {
+		old = parent;
+	}
 	mutex_unlock(&clocks_mutex);
 
+	if (clk->usecount)
+		clk_disable(old);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 56f2fb5..735776d 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 
@@ -35,3 +36,35 @@
 	return ret;
 }
 
+struct platform_device *__init imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		goto err;
+
+	if (res) {
+		ret = platform_device_add_resources(pdev, res, num_resources);
+		if (ret)
+			goto err;
+	}
+
+	if (data) {
+		ret = platform_device_add_data(pdev, data, size_data);
+		if (ret)
+			goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
+
+	return pdev;
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
new file mode 100644
index 0000000..9ab784b
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -0,0 +1,15 @@
+config IMX_HAVE_PLATFORM_FLEXCAN
+	select HAVE_CAN_FLEXCAN
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_I2C
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_UART
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_NAND
+	bool
+
+config IMX_HAVE_PLATFORM_SPI_IMX
+	bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
new file mode 100644
index 0000000..347da51
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -0,0 +1,8 @@
+ifdef CONFIG_CAN_FLEXCAN
+# the ifdef can be removed once the flexcan driver has been merged
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) +=  platform-flexcan.o
+endif
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
new file mode 100644
index 0000000..5e97a01
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
new file mode 100644
index 0000000..d0af9f7
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_i2c(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct imxi2c_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
new file mode 100644
index 0000000..fa3dff1
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irqrx, resource_size_t irqtx,
+		resource_size_t irqrts,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irqrx,
+			.end = irqrx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irqtx,
+			.end = irqtx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irqrts,
+			.end = irqrx,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
new file mode 100644
index 0000000..1c28641
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata,
+		resource_size_t iosize)
+{
+	static int id = 0;
+	
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata)
+{
+	return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
+}
+
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata)
+{
+	return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
new file mode 100644
index 0000000..2831a6d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_spi_imx(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct spi_imx_master *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 2a864617..35a064f 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -11,10 +11,6 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/platform_device.h>
@@ -73,7 +69,51 @@
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX25 */
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31()) {
 		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 71437c6..57ec4a8 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -214,13 +214,16 @@
 	struct mxc_gpio_port *port =
 		container_of(chip, struct mxc_gpio_port, chip);
 	u32 l;
+	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	l = __raw_readl(port->base + GPIO_GDIR);
 	if (dir)
 		l |= 1 << offset;
 	else
 		l &= ~(1 << offset);
 	__raw_writel(l, port->base + GPIO_GDIR);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -229,9 +232,12 @@
 		container_of(chip, struct mxc_gpio_port, chip);
 	void __iomem *reg = port->base + GPIO_DR;
 	u32 l;
+	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
 	__raw_writel(l, reg);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -285,6 +291,8 @@
 		port[i].chip.base = i * 32;
 		port[i].chip.ngpio = 32;
 
+		spin_lock_init(&port[i].lock);
+
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
@@ -292,6 +300,12 @@
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
+			if (port[i].irq_high) {
+				/* setup handler for GPIO 16 to 31 */
+				set_irq_chained_handler(port[i].irq_high,
+						mx3_gpio_irq_handler);
+				set_irq_data(port[i].irq_high, &port[i]);
+			}
 		}
 	}
 
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
new file mode 100644
index 0000000..a384fdd
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_3DS_DB_H__
+#define __ASM_ARCH_MXC_3DS_DB_H__
+
+extern int __init mxc_expio_init(u32 base, u32 p_irq);
+
+#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c13..0000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f..0000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa2..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d23..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-				MXC_MAX_VIRTUAL_INTS)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-	MXC_CARD_SD2 = 0,
-	MXC_CARD_SD3,
-	MXC_CARD_MS,
-	MXC_CARD_SD1,
-	MXC_CARD_MIN = MXC_CARD_SD2,
-	MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50       0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-					0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-	((__raw_readw(PBC_VERSION_REG) & \
-	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-	== 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-	__raw_writew(           \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
-	__raw_writew(  \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-	__raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcf..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933a..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a502..0df71bf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da03..c1ad0ae8 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 36ff3ce..de14543 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -31,7 +31,7 @@
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
deleted file mode 100644
index 383f1c0..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
deleted file mode 100644
index 1341170..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f978..6f371e3 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside pcm038_init().
  *
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
deleted file mode 100644
index 1ac4e16..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7a..0000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-
-/* NOR FLASH */
-#define QONG_NOR_SIZE		(128*1024*1024)
-
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 0b6e11e..2560640 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -23,8 +23,8 @@
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mx25.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX25_UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
new file mode 100644
index 0000000..c5f68c5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data);
+
+#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE)
+#include <linux/can/platform/flexcan.h>
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata);
+#else
+/* the ifdef can be removed once the flexcan driver has been merged */
+struct flexcan_platform_data;
+static inline struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata)
+{
+	return NULL;
+}
+#endif
+
+#include <mach/i2c.h>
+struct platform_device *__init imx_add_imx_i2c(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct imxi2c_platform_data *pdata);
+
+#include <mach/imx-uart.h>
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irqrx, resource_size_t irqtx,
+		resource_size_t irqrts,
+		const struct imxuart_platform_data *pdata);
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct imxuart_platform_data *pdata);
+
+#include <mach/mxc_nand.h>
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata);
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+		int irq, const struct mxc_nand_platform_data *pdata);
+
+#include <mach/spi.h>
+struct platform_device *__init imx_add_spi_imx(int id,
+		resource_size_t iobase, resource_size_t iosize, int irq,
+		const struct spi_imx_master *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
similarity index 64%
rename from arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
rename to arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index a1fd583..634e3f4 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
  *
  * Based on board-pcm038.h which is :
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
@@ -19,22 +19,29 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#ifndef __MACH_EUKREA_BASEBOARDS_H__
+#define __MACH_EUKREA_BASEBOARDS_H__
 
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx27_init().
+ * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
+ * eukrea_cpuimx35_init() or eukrea_cpuimx51_init().
  *
  * This example here is for the development board. Refer
- * eukrea_mbimx27-baseboard.c
+ * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
+ * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
+ * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
+ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
+extern void eukrea_mbimx25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
+extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif
 
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
+#endif /* __MACH_EUKREA_BASEBOARDS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 894d2f8..661fbc6 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -33,9 +33,11 @@
 struct mxc_gpio_port {
 	void __iomem *base;
 	int irq;
+	int irq_high;
 	int virtual_irq_start;
 	struct gpio_chip chip;
 	u32 both_edges;
+	spinlock_t lock;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index f39220d..d7f52c9 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -252,6 +252,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
@@ -371,30 +372,41 @@
 #define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define KPP_CTL_ROW	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define KPP_CTL_COL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index ab0f95d..21bfa46 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -27,8 +27,8 @@
 	IOMUX_CONFIG_ALT5,
 	IOMUX_CONFIG_ALT6,
 	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+	IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
 } iomux_pin_cfg_t;
 
 /* Pad control groupings */
@@ -38,6 +38,8 @@
 				PAD_CTL_SRE_FAST)
 #define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_SRE_FAST)
+#define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
 #define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
 				PAD_CTL_PKE | PAD_CTL_HYS)
@@ -46,289 +48,278 @@
 
 /*
  * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux-v3.h
  */
 
-/*
- * FIXME: This was converted using scripts from existing Freescale code to
- * this form used upstream. Need to verify the name format.
- */
-
-/*						PAD      MUX   ALT INPSE PATH PADCTRL */
-
-#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO_2_5	IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
-
-/* Babbage UART3 */
-#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
-
-#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
-/* REVISIT: Not sure of these values
-
-  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-*/
-#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
-
-/* Babbage UART1 */
-#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
-
-/* Babbage UART2 */
-#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
-
-#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK	IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO_1_27	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT	IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
-						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
-#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
-
-/* EIM */
-#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+/*							  PAD    MUX   ALT INPSE PATH PADCTRL */
+#define MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__GPIO_2_0              IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \
+							0x09b4, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D17__GPIO_2_1              IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__GPIO_2_2              IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__GPIO_2_3              IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \
+							0x09b0, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D20__GPIO_2_4              IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO_2_5		IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__GPIO_2_6              IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__GPIO_2_7              IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__UART3_CTS             IOMUX_PAD(0x410, 0x07c, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD             IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD             IOMUX_PAD(0x418, 0x084, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS             IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D28__EIM_D28               IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29               IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30               IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31               IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__GPIO_2_10             IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__GPIO_2_11             IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__GPIO_2_12             IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__GPIO_2_13             IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__GPIO_2_14             IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__GPIO_2_15             IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__GPIO_2_16             IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__GPIO_2_17             IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__GPIO_2_18             IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__GPIO_2_19             IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__GPIO_2_20             IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__GPIO_2_21             IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0               IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1               IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPIO_2_22             IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPIO_2_23             IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__GPIO_2_24              IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__GPIO_2_25             IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__GPIO_2_26             IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO_2_27             IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__GPIO_2_28             IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__GPIO_2_29             IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__GPIO_2_30             IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__GPIO_2_31           IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO_3_1              IOMUX_PAD(0x494, 0x0FC, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__GPIO_3_2              IOMUX_PAD(0x4A0, 0x100, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1             IOMUX_PAD(0x4D0, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__GPIO_3_3           IOMUX_PAD(0x4E4, 0x108, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__GPIO_3_4           IOMUX_PAD(0x4E8, 0x10C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__GPIO_3_5            IOMUX_PAD(0x4EC, 0x110, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__GPIO_3_6            IOMUX_PAD(0x4F0, 0x114, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__GPIO_3_7           IOMUX_PAD(0x4F4, 0x118, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__GPIO_3_8            IOMUX_PAD(0x4F8, 0x11C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPIO_3_9            IOMUX_PAD(0x4FC, 0x120, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPIO_3_10           IOMUX_PAD(0x500, 0x124, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__GPIO_3_11           IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__GPIO_3_12           IOMUX_PAD(0x514, 0x12C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__GPIO_3_16           IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__GPIO_3_17           IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__GPIO_3_18           IOMUX_PAD(0x520, 0x138, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__GPIO_3_19           IOMUX_PAD(0x524, 0x13C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__GPIO_3_20           IOMUX_PAD(0x528, 0x140, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__GPIO_3_21           IOMUX_PAD(0x52C, 0x144, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__GPIO_3_22           IOMUX_PAD(0x530, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__GPIO_3_23           IOMUX_PAD(0x534, 0x14C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24       IOMUX_PAD(0x538, 0x150, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__GPIO_3_25           IOMUX_PAD(0x53C, 0x154, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__GPIO_3_26           IOMUX_PAD(0x540, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__GPIO_3_27           IOMUX_PAD(0x544, 0x15C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__GPIO_3_28           IOMUX_PAD(0x548, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO_3_29           IOMUX_PAD(0x54C, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__GPIO_3_30           IOMUX_PAD(0x550, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__GPIO_3_31            IOMUX_PAD(0x554, 0x16C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__GPIO_4_0             IOMUX_PAD(0x558, 0x170, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__GPIO_4_1             IOMUX_PAD(0x55C, 0x174, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__GPIO_4_2             IOMUX_PAD(0x560, 0x178, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__GPIO_4_3             IOMUX_PAD(0x564, 0x17C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__GPIO_4_4             IOMUX_PAD(0x568, 0x180, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__GPIO_4_5             IOMUX_PAD(0x56C, 0x184, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__GPIO_4_6             IOMUX_PAD(0x570, 0x188, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__GPIO_4_7             IOMUX_PAD(0x574, 0x18C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__GPIO_4_8             IOMUX_PAD(0x578, 0x190, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__GPIO_3_12             IOMUX_PAD(0x57C, 0x194, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO_3_13             IOMUX_PAD(0x580, 0x198, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10             IOMUX_PAD(0x584, 0x19C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11             IOMUX_PAD(0x588, 0x1A0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12             IOMUX_PAD(0x58C, 0x1A4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13             IOMUX_PAD(0x590, 0x1A8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14             IOMUX_PAD(0x594, 0x1AC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15             IOMUX_PAD(0x598, 0x1B0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16             IOMUX_PAD(0x59C, 0x1B4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17             IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18             IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19             IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC         IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC         IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK       IOMUX_PAD(0x5B4, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK           IOMUX_PAD(0x5B8, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0           IOMUX_PAD(0x860, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__GPIO_4_9             IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO_4_10            IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D14__GPIO_4_11            IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D15__GPIO_4_12            IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D16__GPIO_4_11            IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D17__GPIO_4_12            IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__GPIO_4_11            IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__GPIO_4_12            IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__GPIO_4_13          IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__GPIO_4_14          IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15         IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__GPIO_4_16            IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__HSI2C_CLK		IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__GPIO_4_17            IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__HSI2C_DAT		IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18         IOMUX_PAD(0x5F0, 0x200, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19         IOMUX_PAD(0x5F4, 0x204, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO_4_20          IOMUX_PAD(0x5F8, 0x208, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__GPIO_4_21          IOMUX_PAD(0x5FC, 0x20C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__GPIO_4_22          IOMUX_PAD(0x600, 0x210, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__GPIO_4_23          IOMUX_PAD(0x604, 0x214, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO_4_24           IOMUX_PAD(0x608, 0x218, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO_4_25           IOMUX_PAD(0x60C, 0x21C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__GPIO_4_26           IOMUX_PAD(0x610, 0x220, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__GPIO_4_27          IOMUX_PAD(0x614, 0x224, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__UART1_RXD           IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD           IOMUX_PAD(0x61C, 0x22C, 0, 0x0,   0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS           IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS           IOMUX_PAD(0x624, 0x234, 0, 0x0,   0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__UART2_RXD           IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD           IOMUX_PAD(0x62C, 0x23C, 0, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__GPIO_1_22           IOMUX_PAD(0x630, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__GPIO_1_23           IOMUX_PAD(0x634, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__GPIO_1_24          IOMUX_PAD(0x638, 0x248, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0             IOMUX_PAD(0x63C, 0x24C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1             IOMUX_PAD(0x640, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2             IOMUX_PAD(0x644, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3             IOMUX_PAD(0x648, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0             IOMUX_PAD(0x64C, 0x25C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1             IOMUX_PAD(0x650, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2             IOMUX_PAD(0x654, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3             IOMUX_PAD(0x658, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4             IOMUX_PAD(0x65C, 0x26C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \
+							0x09b8, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5             IOMUX_PAD(0x660, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, 0,     0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \
+							0x09bc, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK           IOMUX_PAD(0x678, 0x278, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR           IOMUX_PAD(0x67C, 0x27C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP           IOMUX_PAD(0x680, 0x280, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO_1_27           IOMUX_PAD(0x680, 0x280, 2, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT           IOMUX_PAD(0x684, 0x284, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0       IOMUX_PAD(0x688, 0x288, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1       IOMUX_PAD(0x68C, 0x28C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2       IOMUX_PAD(0x690, 0x290, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3       IOMUX_PAD(0x694, 0x294, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4       IOMUX_PAD(0x698, 0x298, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5       IOMUX_PAD(0x69C, 0x29C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6       IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7       IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__GPIO_3_0            IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0         IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1         IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2         IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3         IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4         IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5         IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6         IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7         IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8         IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9         IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10       IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11       IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12       IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13       IOMUX_PAD(0x700, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14       IOMUX_PAD(0x704, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15       IOMUX_PAD(0x708, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16       IOMUX_PAD(0x70C, 0x30C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17       IOMUX_PAD(0x710, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18       IOMUX_PAD(0x714, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19       IOMUX_PAD(0x718, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20       IOMUX_PAD(0x71C, 0x31C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21       IOMUX_PAD(0x720, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22       IOMUX_PAD(0x724, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23       IOMUX_PAD(0x728, 0x328, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3             IOMUX_PAD(0x72C, 0x32C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2             IOMUX_PAD(0x734, 0x330, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1                 IOMUX_PAD(0x73C, 0x334, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2                 IOMUX_PAD(0x740, 0x338, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3                 IOMUX_PAD(0x744, 0x33C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4             IOMUX_PAD(0x748, 0x340, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2             IOMUX_PAD(0x74C, 0x344, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3             IOMUX_PAD(0x750, 0x348, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     IOMUX_PAD(0x754, 0x34C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4                 IOMUX_PAD(0x758, 0x350, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0         IOMUX_PAD(0x75C, 0x354, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1         IOMUX_PAD(0x760, 0x358, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2         IOMUX_PAD(0x764, 0x35C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3         IOMUX_PAD(0x768, 0x360, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4         IOMUX_PAD(0x76C, 0x364, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5         IOMUX_PAD(0x770, 0x368, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO_1_19          IOMUX_PAD(0x774, 0x36C, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO_1_29          IOMUX_PAD(0x778, 0x370, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO_1_30          IOMUX_PAD(0x77C, 0x374, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO_1_31          IOMUX_PAD(0x780, 0x378, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10       IOMUX_PAD(0x784, 0x37C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11       IOMUX_PAD(0x788, 0x380, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12       IOMUX_PAD(0x78C, 0x384, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD               IOMUX_PAD(0x79C, 0x394, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK               IOMUX_PAD(0x7A0, 0x398, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0           IOMUX_PAD(0x7A4, 0x39C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1           IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2           IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3           IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD               IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK               IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0           IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1           IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2           IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3           IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
+							0x9b8,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
+							0x9bc,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 0, 0x0,   1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 0, 0x0,   0, NO_PAD_CTRL)
 
 #endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 3887f3f..15d5951 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __MACH_IOMUX_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index f2f73d3..0880a4a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -89,6 +89,21 @@
 #define PAD_CTL_SRE_FAST		(1 << 0)
 #define PAD_CTL_SRE_SLOW		(0 << 0)
 
+
+#define MX51_NUM_GPIO_PORT	4
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
 /*
  * setups a single pad in the iomuxer
  */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index c4b40c3..564ec9d 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -44,12 +44,12 @@
  */
 #define CONSISTENT_DMA_SIZE SZ_8M
 
-#elif defined(CONFIG_MX1_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
 /*
  * Increase size of DMA-consistent memory region.
  * This is required for i.MX camera driver to capture at least four VGA frames.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
index de2128d..29115f4 100644
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ b/arch/arm/plat-mxc/include/mach/mmc.h
@@ -31,6 +31,9 @@
 
 	/* adjust slot voltage */
 	void (*setpower)(struct device *, unsigned int vdd);
+
+	/* enable card detect using DAT3 */
+	int dat3_card_detect;
 };
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 5eba7e6..641b246 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -91,24 +91,24 @@
 #define MX1_SIM_DATA_INT	16
 #define MX1_RTC_INT		17
 #define MX1_RTC_SAMINT		18
-#define MX1_UART2_MINT_PFERR	19
-#define MX1_UART2_MINT_RTS	20
-#define MX1_UART2_MINT_DTR	21
-#define MX1_UART2_MINT_UARTC	22
-#define MX1_UART2_MINT_TX	23
-#define MX1_UART2_MINT_RX	24
-#define MX1_UART1_MINT_PFERR	25
-#define MX1_UART1_MINT_RTS	26
-#define MX1_UART1_MINT_DTR	27
-#define MX1_UART1_MINT_UARTC	28
-#define MX1_UART1_MINT_TX	29
-#define MX1_UART1_MINT_RX	30
+#define MX1_INT_UART2PFERR	19
+#define MX1_INT_UART2RTS	20
+#define MX1_INT_UART2DTR	21
+#define MX1_INT_UART2UARTC	22
+#define MX1_INT_UART2TX		23
+#define MX1_INT_UART2RX		24
+#define MX1_INT_UART1PFERR	25
+#define MX1_INT_UART1RTS	26
+#define MX1_INT_UART1DTR	27
+#define MX1_INT_UART1UARTC	28
+#define MX1_INT_UART1TX		29
+#define MX1_INT_UART1RX		30
 #define MX1_VOICE_DAC_INT	31
 #define MX1_VOICE_ADC_INT	32
 #define MX1_PEN_DATA_INT	33
 #define MX1_PWM_INT		34
 #define MX1_SDHC_INT		35
-#define MX1_I2C_INT		39
+#define MX1_INT_I2C		39
 #define MX1_CSPI_INT		41
 #define MX1_SSI_TX_INT		42
 #define MX1_SSI_TX_ERR_INT	43
@@ -245,7 +245,7 @@
 #define PEN_DATA_INT MX1_PEN_DATA_INT
 #define PWM_INT MX1_PWM_INT
 #define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_I2C_INT
+#define I2C_INT MX1_INT_I2C
 #define CSPI_INT MX1_CSPI_INT
 #define SSI_TX_INT MX1_SSI_TX_INT
 #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 4eb6e33..4a6f800 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -11,6 +11,12 @@
 #define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
+#define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_CAN1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x88000)
+#define MX25_CAN2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x8c000)
+#define MX25_I2C2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xa4000)
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
 
 #define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
@@ -27,22 +33,48 @@
 	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
 	IMX_IO_ADDRESS(x, MX25_AVIC))
 
+#define MX25_AIPS1_IO_ADDRESS(x) \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
+#define MX25_AUDMUX_BASE_ADDR		0x43fb0000
+#define MX25_UART3_BASE_ADDR		0x5000c000
+#define MX25_UART4_BASE_ADDR		0x50008000
+#define MX25_UART5_BASE_ADDR		0x5002c000
 
+#define MX25_CSPI3_BASE_ADDR		0x50004000
+#define MX25_CSPI2_BASE_ADDR		0x50010000
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_SSI2_BASE_ADDR		0x50014000
+#define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
 #define MX25_LCDC_BASE_ADDR		0x53fbc000
+#define MX25_KPP_BASE_ADDR		0x43fa8000
+#define MX25_OTG_BASE_ADDR		0x53ff4000
+#define MX25_CSI_BASE_ADDR		0x53ff8000
 
-#define MX25_INT_DRYICE	25
-#define MX25_INT_FEC	57
-#define MX25_INT_NANDFC	33
-#define MX25_INT_LCDC	39
-
-#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
-#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
-#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
-#endif
+#define MX25_INT_CSPI3		0
+#define MX25_INT_I2C1		3
+#define MX25_INT_I2C2		4
+#define MX25_INT_UART4		5
+#define MX25_INT_I2C3		10
+#define MX25_INT_SSI2		11
+#define MX25_INT_SSI1		12
+#define MX25_INT_CSPI2		13
+#define MX25_INT_CSPI1		14
+#define MX25_INT_CSI		17
+#define MX25_INT_UART3		18
+#define MX25_INT_KPP		24
+#define MX25_INT_DRYICE		25
+#define MX25_INT_UART2		32
+#define MX25_INT_NANDFC		33
+#define MX25_INT_LCDC		39
+#define MX25_INT_UART5		40
+#define MX25_INT_CAN1		43
+#define MX25_INT_CAN2		44
+#define MX25_INT_UART1		45
+#define MX25_INT_FEC		57
 
 #endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index bae9cd7..a8ab2e0 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -48,7 +48,7 @@
 #define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
 #define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
 #define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_I2C1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
 #define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
 #define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
 #define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
@@ -150,7 +150,7 @@
 #define MX27_INT_SDHC3		9
 #define MX27_INT_SDHC2		10
 #define MX27_INT_SDHC1		11
-#define MX27_INT_I2C		12
+#define MX27_INT_I2C1		12
 #define MX27_INT_SSI2		13
 #define MX27_INT_SSI1		14
 #define MX27_INT_CSPI2		15
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
new file mode 100644
index 0000000..3c080a3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -0,0 +1,46 @@
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_SWAP16		(1 << 0)
+#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
+#define MX2_CAMERA_CCIR			(1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
+#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
+#define MX2_CAMERA_INV_DATA		(1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+	unsigned long flags;
+	unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index fb90e11..afee3ab 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -23,7 +23,7 @@
 #define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
 #define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
 #define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
 #define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
 #define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
 #define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
@@ -145,7 +145,7 @@
 #define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
 #define MX31_INT_MMC_SDHC1	9
-#define MX31_INT_I2C		10
+#define MX31_INT_I2C1		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
 #define MX31_INT_CSPI2		13
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 526a558..af3038c 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -18,7 +18,7 @@
 #define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
 #define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
 #define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
 #define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
 #define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
 #define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
@@ -60,6 +60,8 @@
 #define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
 #define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
 #define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_CAN1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe4000)
+#define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
 #define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
 #define MX35_OTG_BASE_ADDR		0x53ff4000
 
@@ -123,7 +125,7 @@
 #define MX35_INT_MMC_SDHC1	7
 #define MX35_INT_MMC_SDHC2	8
 #define MX35_INT_MMC_SDHC3	9
-#define MX35_INT_I2C		10
+#define MX35_INT_I2C1		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
 #define MX35_INT_CSPI2		13
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
index 36d7ff2..f226ee3 100644
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _MX3_CAMERA_H_
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 5182b98..0ca3101 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __MACH_MXC91231_H__
 #define __MACH_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 5d2d21d..04c0d06 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -20,9 +20,13 @@
 #ifndef __ASM_ARCH_NAND_H
 #define __ASM_ARCH_NAND_H
 
+#include <linux/mtd/partitions.h>
+
 struct mxc_nand_platform_data {
-	int width;	/* data bus width in bytes */
-	int hw_ecc:1;	/* 0 if supress hardware ECC */
-	int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	unsigned int width;	/* data bus width in bytes */
+	unsigned int hw_ecc:1;	/* 0 if supress hardware ECC */
+	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	struct mtd_partition *parts;	/* partition table */
+	int nr_parts;			/* size of parts */
 };
 #endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index ef00199..4acd114 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 024416e..2d96246 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6d3d0f..d9bd37e 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
 #define __ASM_ARCH_MXC_UNCOMPRESS_H__
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 44243a2..ef6379c 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_VMALLOC_H__
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe..7331f2a 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -142,9 +142,6 @@
 	for (i = 0; i < 8; i++)
 		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
-	/* init architectures chained interrupt handler */
-	mxc_register_gpios();
-
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
 	init_FIQ();
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 97f4279..925bce4 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 9b86d2a..b3da9aad 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -145,8 +145,6 @@
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
-	mxc_register_gpios();
-
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
 
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 5a6ef25..977c8f9 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 
+#include <plat/pincfg.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 
@@ -46,20 +47,12 @@
 	u32 edge_falling;
 };
 
-/* Mode functions */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
+static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, int gpio_mode)
 {
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 afunc, bfunc, bit;
+	u32 bit = 1 << offset;
+	u32 afunc, bfunc;
 
-	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
 	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
 	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
 	if (gpio_mode & NMK_GPIO_ALT_A)
@@ -68,6 +61,203 @@
 		bfunc |= bit;
 	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
 	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+}
+
+static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_slpm mode)
+{
+	u32 bit = 1 << offset;
+	u32 slpm;
+
+	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
+	if (mode == NMK_GPIO_SLPM_NOCHANGE)
+		slpm |= bit;
+	else
+		slpm &= ~bit;
+	writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
+}
+
+static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_pull pull)
+{
+	u32 bit = 1 << offset;
+	u32 pdis;
+
+	pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
+	if (pull == NMK_GPIO_PULL_NONE)
+		pdis |= bit;
+	else
+		pdis &= ~bit;
+	writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
+
+	if (pull == NMK_GPIO_PULL_UP)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else if (pull == NMK_GPIO_PULL_DOWN)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+}
+
+static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
+			     pin_cfg_t cfg)
+{
+	static const char *afnames[] = {
+		[NMK_GPIO_ALT_GPIO]	= "GPIO",
+		[NMK_GPIO_ALT_A]	= "A",
+		[NMK_GPIO_ALT_B]	= "B",
+		[NMK_GPIO_ALT_C]	= "C"
+	};
+	static const char *pullnames[] = {
+		[NMK_GPIO_PULL_NONE]	= "none",
+		[NMK_GPIO_PULL_UP]	= "up",
+		[NMK_GPIO_PULL_DOWN]	= "down",
+		[3] /* illegal */	= "??"
+	};
+	static const char *slpmnames[] = {
+		[NMK_GPIO_SLPM_INPUT]		= "input",
+		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change",
+	};
+
+	int pin = PIN_NUM(cfg);
+	int pull = PIN_PULL(cfg);
+	int af = PIN_ALT(cfg);
+	int slpm = PIN_SLPM(cfg);
+
+	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n",
+		pin, afnames[af], pullnames[pull], slpmnames[slpm]);
+
+	__nmk_gpio_make_input(nmk_chip, offset);
+	__nmk_gpio_set_pull(nmk_chip, offset, pull);
+	__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
+	__nmk_gpio_set_mode(nmk_chip, offset, af);
+}
+
+/**
+ * nmk_config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration.  The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects.  The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+int nmk_config_pin(pin_cfg_t cfg)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	int gpio = PIN_NUM(cfg);
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_config_pin);
+
+/**
+ * nmk_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using nmk_config_pin().  Refer to that function for
+ * further information.
+ */
+int nmk_config_pins(pin_cfg_t *cfgs, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		int ret = nmk_config_pin(cfgs[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins);
+
+/**
+ * nmk_gpio_set_slpm() - configure the sleep mode of a pin
+ * @gpio: pin number
+ * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
+ *
+ * Sets the sleep mode of a pin.  If @mode is NMK_GPIO_SLPM_INPUT, the pin is
+ * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
+ * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
+ * configured even when in sleep and deep sleep.
+ */
+int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+/**
+ * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin.  This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input.  Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
 	return 0;
@@ -111,32 +301,41 @@
 	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
 }
 
+enum nmk_gpio_irq_type {
+	NORMAL,
+	WAKE,
+};
+
 static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
-				  int gpio, bool enable)
+				  int gpio, enum nmk_gpio_irq_type which,
+				  bool enable)
 {
+	u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
+	u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
 	u32 bitmask = nmk_gpio_get_bitmask(gpio);
 	u32 reg;
 
 	/* we must individually set/clear the two edges */
 	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+		reg = readl(nmk_chip->addr + rimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+		writel(reg, nmk_chip->addr + rimsc);
 	}
 	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+		reg = readl(nmk_chip->addr + fimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+		writel(reg, nmk_chip->addr + fimsc);
 	}
 }
 
-static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which,
+			       bool enable)
 {
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
@@ -147,26 +346,35 @@
 	nmk_chip = get_irq_chip_data(irq);
 	bitmask = nmk_gpio_get_bitmask(gpio);
 	if (!nmk_chip)
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+	__nmk_gpio_irq_modify(nmk_chip, gpio, which, enable);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
 }
 
 static void nmk_gpio_irq_mask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, false);
-};
+	nmk_gpio_irq_modify(irq, NORMAL, false);
+}
 
 static void nmk_gpio_irq_unmask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, true);
+	nmk_gpio_irq_modify(irq, NORMAL, true);
+}
+
+static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	return nmk_gpio_irq_modify(irq, WAKE, on);
 }
 
 static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 {
-	bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+	struct irq_desc *desc = irq_to_desc(irq);
+	bool enabled = !(desc->status & IRQ_DISABLED);
+	bool wake = desc->wake_depth;
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
@@ -186,7 +394,10 @@
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, false);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
 
 	nmk_chip->edge_rising &= ~bitmask;
 	if (type & IRQ_TYPE_EDGE_RISING)
@@ -197,7 +408,10 @@
 		nmk_chip->edge_falling |= bitmask;
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, true);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
 
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
@@ -210,6 +424,7 @@
 	.mask		= nmk_gpio_irq_mask,
 	.unmask		= nmk_gpio_irq_unmask,
 	.set_type	= nmk_gpio_irq_set_type,
+	.set_wake	= nmk_gpio_irq_set_wake,
 };
 
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -266,16 +481,6 @@
 	return 0;
 }
 
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	return 0;
-}
-
 static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct nmk_gpio_chip *nmk_chip =
@@ -298,12 +503,33 @@
 		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
 }
 
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	nmk_gpio_set_output(chip, offset, val);
+
+	return 0;
+}
+
+static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
+}
+
 /* This structure is replicated for each GPIO block allocated at probe time */
 static struct gpio_chip nmk_gpio_template = {
 	.direction_input	= nmk_gpio_make_input,
 	.get			= nmk_gpio_get_input,
 	.direction_output	= nmk_gpio_make_output,
 	.set			= nmk_gpio_set_output,
+	.to_irq			= nmk_gpio_to_irq,
 	.ngpio			= NMK_GPIO_PER_CHIP,
 	.can_sleep		= 0,
 };
@@ -393,30 +619,12 @@
 	return ret;
 }
 
-static int __exit nmk_gpio_remove(struct platform_device *dev)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct resource *res;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
-	nmk_chip = platform_get_drvdata(dev);
-	gpiochip_remove(&nmk_chip->chip);
-	clk_disable(nmk_chip->clk);
-	clk_put(nmk_chip->clk);
-	kfree(nmk_chip);
-	release_mem_region(res->start, resource_size(res));
-	return 0;
-}
-
-
 static struct platform_driver nmk_gpio_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "gpio",
 		},
 	.probe = nmk_gpio_probe,
-	.remove = __exit_p(nmk_gpio_remove),
 	.suspend = NULL, /* to be done */
 	.resume = NULL,
 };
@@ -426,7 +634,7 @@
 	return platform_driver_register(&nmk_gpio_driver);
 }
 
-arch_initcall(nmk_gpio_init);
+core_initcall(nmk_gpio_init);
 
 MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
 MODULE_DESCRIPTION("Nomadik GPIO Driver");
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 4200811..aba3551 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -55,6 +55,21 @@
 #define NMK_GPIO_ALT_B	2
 #define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
 
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
 extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
 extern int nmk_gpio_get_mode(int gpio);
 
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 42c9072..65704a3 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,6 +1,12 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
 /* should be set by the platform code */
 extern void __iomem *mtu_base;
 
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
new file mode 100644
index 0000000..7eed11c
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ *
+ * Based on arch/arm/mach-pxa/include/mach/mfp.h:
+ *   Copyright (C) 2007 Marvell International Ltd.
+ *   eric miao <eric.miao@marvell.com>
+ */
+
+#ifndef __PLAT_PINCFG_H
+#define __PLAT_PINCFG_H
+
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *	bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *	bit  9..10 - Alternate Function Selection
+ *	bit 11..12 - Pull up/down state
+ *	bit     13 - Sleep mode behaviour
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *		     pull up/down = disabled
+ *		     sleep mode = input
+ *
+ * PIN_CFG	   - default config with alternate function
+ * PIN_CFG_PULL	   - default config with alternate function and pull up/down
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK		0x1ff
+#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT		9
+#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT		11
+#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT		13
+#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_INPUT		(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+
+#define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
+
+#define PIN_CFG(num, alt)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_PULL(num, alt, pull)	\
+	((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
+
+extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+
+#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 0ff3798..ea3ca86 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -13,7 +13,9 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/err.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
@@ -40,7 +42,6 @@
 	.rating		= 200,
 	.read		= nmdk_read_timer_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -80,6 +81,12 @@
 	case CLOCK_EVT_MODE_UNUSED:
 		/* disable irq */
 		writel(0, mtu_base + MTU_IMSC);
+		/* disable timer */
+		cr = readl(mtu_base + MTU_CR(1));
+		cr &= ~MTU_CRn_ENA;
+		writel(cr, mtu_base + MTU_CR(1));
+		/* load some high default value */
+		writel(0xffffffff, mtu_base + MTU_LR(1));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -96,7 +103,6 @@
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
@@ -124,19 +130,32 @@
 void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
-	u32 cr = MTU_CRn_32BITS;;
+	struct clk *clk0;
+	struct clk *clk1;
+	u32 cr;
+
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
+
+	clk1 = clk_get_sys("mtu1", NULL);
+	BUG_ON(IS_ERR(clk1));
+
+	clk_enable(clk0);
+	clk_enable(clk1);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
 	 * use a divide-by-16 counter if it's more than 16MHz
 	 */
-	rate = CLOCK_TICK_RATE;
+	cr = MTU_CRn_32BITS;;
+	rate = clk_get_rate(clk0);
 	if (rate > 16 << 20) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
 		cr |= MTU_CRn_PRESCALE_1;
 	}
+	clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
 
 	/* Timer 0 is the free running clocksource */
 	writel(cr, mtu_base + MTU_CR(0));
@@ -144,7 +163,6 @@
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
 	/* Now the scheduling clock is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
@@ -153,8 +171,18 @@
 		       nmdk_clksrc.name);
 
 	/* Timer 1 is used for events, fix according to rate */
+	cr = MTU_CRn_32BITS;
+	rate = clk_get_rate(clk1);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
+	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
+
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+
 	nmdk_clkevt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
 	nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 219c01e..ebed826 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -22,6 +22,7 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -35,6 +36,7 @@
 #include <plat/mux.h>
 #include <plat/fpga.h>
 #include <plat/serial.h>
+#include <plat/vram.h>
 
 #include <plat/clock.h>
 
@@ -81,6 +83,12 @@
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
+void __init omap_reserve(void)
+{
+	omapfb_reserve_sdram_memblock();
+	omap_vram_reserve_sdram_memblock();
+}
+
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index c64875f..44bafda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -541,11 +541,11 @@
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index d3eea4f..0054b95 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/io.h>
 #include <linux/omapfb.h>
 
@@ -171,49 +171,78 @@
 	return 0;
 }
 
+static int valid_sdram(unsigned long addr, unsigned long size)
+{
+	struct memblock_property res;
+
+	res.base = addr;
+	res.size = size;
+	return !memblock_find(&res) && res.base == addr && res.size == size;
+}
+
+static int reserve_sdram(unsigned long addr, unsigned long size)
+{
+	if (memblock_is_region_reserved(addr, size))
+		return -EBUSY;
+	if (memblock_reserve(addr, size))
+		return -ENOMEM;
+	return 0;
+}
+
 /*
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void __init omapfb_reserve_sdram(void)
+void __init omapfb_reserve_sdram_memblock(void)
 {
-	struct bootmem_data	*bdata;
-	unsigned long		sdram_start, sdram_size;
-	unsigned long		reserved;
-	int			i;
+	unsigned long reserved = 0;
+	int i;
 
 	if (config_invalid)
 		return;
 
-	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-	reserved = 0;
 	for (i = 0; ; i++) {
-		struct omapfb_mem_region	rg;
+		struct omapfb_mem_region rg;
 
 		if (get_fbmem_region(i, &rg) < 0)
 			break;
+
 		if (i == OMAPFB_PLANE_NUM) {
-			printk(KERN_ERR
-				"Extraneous FB mem configuration entries\n");
+			pr_err("Extraneous FB mem configuration entries\n");
 			config_invalid = 1;
 			return;
 		}
+
 		/* Check if it's our memory type. */
-		if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
-				          sdram_start, sdram_size) < 0 ||
-		    (rg.type != OMAPFB_MEMTYPE_SDRAM))
+		if (rg.type != OMAPFB_MEMTYPE_SDRAM)
 			continue;
-		BUG_ON(omapfb_config.mem_desc.region[i].size);
-		if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+
+		/* Check if the region falls within SDRAM */
+		if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
+			continue;
+
+		if (rg.size == 0) {
+			pr_err("Zero size for FB region %d\n", i);
 			config_invalid = 1;
 			return;
 		}
+
 		if (rg.paddr) {
-			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
+			if (reserve_sdram(rg.paddr, rg.size)) {
+				pr_err("Trying to use reserved memory for FB region %d\n",
+					i);
+				config_invalid = 1;
+				return;
+			}
 			reserved += rg.size;
 		}
+
+		if (omapfb_config.mem_desc.region[i].size) {
+			pr_err("FB region %d already set\n", i);
+			config_invalid = 1;
+			return;
+		}
+
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}
@@ -359,7 +388,10 @@
 
 arch_initcall(omap_init_fb);
 
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
@@ -375,7 +407,10 @@
 {
 }
 
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 393e921..9b7e354 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -673,6 +673,7 @@
 		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
 }
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index d265018..5e4afbe 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -34,6 +34,8 @@
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
+extern void omap_reserve(void);
+
 /*
  * IO bases for various OMAP processors
  * Except the tap base, rest all the io bases
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index edd4987..0aa4ecd 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -38,7 +38,7 @@
 extern void omap_vram_set_sdram_vram(u32 size, u32 start);
 extern void omap_vram_set_sram_vram(u32 size, u32 start);
 
-extern void omap_vram_reserve_sdram(void);
+extern void omap_vram_reserve_sdram_memblock(void);
 extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
@@ -48,7 +48,7 @@
 static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
 static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
 
-static inline void omap_vram_reserve_sdram(void) { }
+static inline void omap_vram_reserve_sdram_memblock(void) { }
 static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index e43983ba5..8ce0de2 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -140,8 +140,10 @@
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 54c84a4..779553a 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -13,6 +13,7 @@
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <linux/delay.h>
 
 /*
  * PCIe unit register offsets.
@@ -46,6 +47,8 @@
 #define  PCIE_STAT_BUS_OFFS		8
 #define  PCIE_STAT_BUS_MASK		0xff
 #define  PCIE_STAT_LINK_DOWN		1
+#define PCIE_DEBUG_CTRL         0x1a60
+#define  PCIE_DEBUG_SOFT_RESET		(1<<20)
 
 
 u32 __init orion_pcie_dev_id(void __iomem *base)
@@ -85,6 +88,32 @@
 	writel(stat, base + PCIE_STAT_OFF);
 }
 
+void __init orion_pcie_reset(void __iomem *base)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * MV-S104860-U0, Rev. C:
+	 * PCI Express Unit Soft Reset
+	 * When set, generates an internal reset in the PCI Express unit.
+	 * This bit should be cleared after the link is re-established.
+	 */
+	reg = readl(base + PCIE_DEBUG_CTRL);
+	reg |= PCIE_DEBUG_SOFT_RESET;
+	writel(reg, base + PCIE_DEBUG_CTRL);
+
+	for (i = 0; i < 20; i++) {
+		mdelay(10);
+
+		if (orion_pcie_link_up(base))
+			break;
+	}
+
+	reg &= ~(PCIE_DEBUG_SOFT_RESET);
+	writel(reg, base + PCIE_DEBUG_CTRL);
+}
+
 /*
  * Setup PCIE BARs and Address Decode Wins:
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
@@ -153,6 +182,11 @@
 	u32 mask;
 
 	/*
+	 * soft reset PCIe unit
+	 */
+	orion_pcie_reset(base);
+
+	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
 	orion_pcie_setup_wins(base, dram);
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 6187edf..a17cc0c 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,8 +2,9 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o pmu.o
+obj-y	:= dma.o
 
+obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index e56c807..f36cd33 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -71,7 +71,7 @@
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_EXTINT_RISEEDGE;
+		newvalue = S5P_EXTINT_FALLEDGE;
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 13f9fb2..016674f 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -166,8 +166,10 @@
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
@@ -239,7 +241,7 @@
 	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 }
 #else
-static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci0(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC */
 
 #ifdef CONFIG_S3C_DEV_HSMMC1
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 1670734..37fa593 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -17,8 +17,8 @@
 		.macro	addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, =SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, =VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index a1025d3..ab21165 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -58,6 +58,11 @@
 
 #define INT_STATUS		0x1
 
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define SPEAR_MIN_RANGE 4
+
 static __iomem void *gpt_base;
 static struct clk *gpt_clk;
 
@@ -66,44 +71,6 @@
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
-/*
- * Following clocksource_set_clock and clockevent_set_clock picked
- * from arch/mips/kernel/time.c
- */
-
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, clock);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-}
-
-void __init clockevent_set_clock(struct clock_event_device *cd,
-	unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) clock << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cd->shift = shift;
-	cd->mult = (u32) temp;
-}
-
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
@@ -138,7 +105,7 @@
 	val |= CTRL_ENABLE ;
 	writew(val, gpt_base + CR(CLKSRC));
 
-	clocksource_set_clock(&clksrc, tick_rate);
+	clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
 
 	/* register the clocksource */
 	clocksource_register(&clksrc);
@@ -233,7 +200,7 @@
 	tick_rate = clk_get_rate(gpt_clk);
 	tick_rate >>= CTRL_PRESCALER16;
 
-	clockevent_set_clock(&clkevt, tick_rate);
+	clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
 
 	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
 			&clkevt);
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 9b1a668..5cf88e8 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -2,3 +2,7 @@
 obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
 obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
 obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifeq ($(CONFIG_LEDS_CLASS),y)
+obj-$(CONFIG_ARCH_REALVIEW) += leds.o
+obj-$(CONFIG_ARCH_VERSATILE) += leds.o
+endif
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
new file mode 100644
index 0000000..3169fa5
--- /dev/null
+++ b/arch/arm/plat-versatile/leds.c
@@ -0,0 +1,103 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+#endif
+
+struct versatile_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} versatile_leds[] = {
+	{ "versatile:0", "heartbeat", },
+	{ "versatile:1", "mmc0", },
+	{ "versatile:2", },
+	{ "versatile:3", },
+	{ "versatile:4", },
+	{ "versatile:5", },
+	{ "versatile:6", },
+	{ "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+	writel(reg, LEDREG);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init versatile_leds_init(void)
+{
+	int i;
+
+	/* All ON */
+	writel(0xff, LEDREG);
+	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+		struct versatile_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = versatile_leds[i].name;
+		led->cdev.brightness_set = versatile_led_set;
+		led->cdev.brightness_get = versatile_led_get;
+		led->cdev.default_trigger = versatile_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(versatile_leds_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8f10d24..48cbdcb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat May 1 10:36:42 2010
+# Last update: Mon Jul 12 21:10:14 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1994,7 +1994,7 @@
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
 sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
 hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
 sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
@@ -2609,7 +2609,7 @@
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-sheevad			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_SHEEVAD		SHEEVAD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2804,3 +2804,149 @@
 snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
 tam3517			MACH_TAM3517		TAM3517			2818
 pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
+fuji			MACH_FUJI		FUJI			2875
+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
+em1sy			MACH_EM1SY		EM1SY			2877
+m502			MACH_M502		M502			2878
+matrix518		MACH_MATRIX518		MATRIX518		2879
+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
+spear1310		MACH_SPEAR1310		SPEAR1310		2881
+bv07			MACH_BV07		BV07			2882
+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
+devixp			MACH_DEVIXP		DEVIXP			2885
+miccpt			MACH_MICCPT		MICCPT			2886
+mic256			MACH_MIC256		MIC256			2887
+as1167			MACH_AS1167		AS1167			2888
+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
+u5500			MACH_U5500		U5500			2890
+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
+mecha			MACH_MECHA		MECHA			2892
+bubba3			MACH_BUBBA3		BUBBA3			2893
+pupitre			MACH_PUPITRE		PUPITRE			2894
+tegra_harmony		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
+simplenet		MACH_SIMPLENET		SIMPLENET		2898
+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
+pec_tc			MACH_PEC_TC		PEC_TC			2900
+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
+blueshark		MACH_BLUESHARK		BLUESHARK		2907
+e10			MACH_E10		E10			2908
+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
+pov15hd			MACH_POV15HD		POV15HD			2910
+stella			MACH_STELLA		STELLA			2911
+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
+netwalker		MACH_NETWALKER		NETWALKER		2914
+acsx106			MACH_ACSX106		ACSX106			2915
+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
+nsb3ast			MACH_NSB3AST		NSB3AST			2917
+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
+af4000			MACH_AF4000		AF4000			2919
+ark9431			MACH_ARK9431		ARK9431			2920
+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
+oratisaes		MACH_ORATISAES		ORATISAES		2924
+smdkv310		MACH_SMDKV310		SMDKV310		2925
+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
+ventana			MACH_VENTANA		VENTANA			2927
+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
+mimas			MACH_MIMAS		MIMAS			2930
+titan			MACH_TITAN		TITAN			2931
+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
+es2440			MACH_ES2440		ES2440			2933
+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
+jigen301		MACH_JIGEN		JIGEN			2937
+smdk6450		MACH_SMDK6450		SMDK6450		2938
+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
+ns2416			MACH_NS2416		NS2416			2940
+rpc353			MACH_RPC353		RPC353			2941
+tq6410			MACH_TQ6410		TQ6410			2942
+sky6410			MACH_SKY6410		SKY6410			2943
+dynasty			MACH_DYNASTY		DYNASTY			2944
+vivo			MACH_VIVO		VIVO			2945
+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
+basi			MACH_BASI		BASI			2948
+tn200			MACH_TN200		TN200			2949
+c2mmi			MACH_C2MMI		C2MMI			2950
+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
+tube			MACH_TUBE		TUBE			2953
+messina			MACH_MESSINA		MESSINA			2954
+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
+cetus9263		MACH_CETUS9263		CETUS9263		2956
+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
+vmx25			MACH_VMX25		VMX25			2958
+vmx51			MACH_VMX51		VMX51			2959
+abacus			MACH_ABACUS		ABACUS			2960
+cm4745			MACH_CM4745		CM4745			2961
+oratislink		MACH_ORATISLINK		ORATISLINK		2962
+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
+netviz			MACH_NETVIZ		NETVIZ			2964
+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 66dc2d0..d66cead 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -277,7 +277,7 @@
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
 	mov	pc, lr
 	.org	1b + 8
 	.endr
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 315a540..8063a32 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 
+#include <asm/cputype.h>
 #include <asm/thread_notify.h>
 #include <asm/vfp.h>
 
@@ -549,10 +550,13 @@
 		/*
 		 * Check for the presence of the Advanced SIMD
 		 * load/store instructions, integer and single
-		 * precision floating point operations.
+		 * precision floating point operations. Only check
+		 * for NEON if the hardware has the MVFR registers.
 		 */
-		if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
-			elf_hwcap |= HWCAP_NEON;
+		if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
+			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+				elf_hwcap |= HWCAP_NEON;
+		}
 #endif
 	}
 	return 0;
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a..e6ac0b6 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -54,6 +54,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c7f25bb..6174020 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -5,6 +5,7 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
+#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -35,6 +36,7 @@
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 84d103c3..a4dba6b 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -1789,6 +1789,12 @@
 			flush_cache = 1;
 			break;
 
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
 			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
 		case 'P':
 			ptr = &input_buffer[1];
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 30f5d10..a325d57 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -257,10 +257,10 @@
  */
  out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(__frame))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(__frame))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d5f4e91..21b70137 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -144,6 +144,7 @@
 				VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
+		spin_unlock(&vp_lock);
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
 		return -EINVAL;
 	}
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 5dfd916..7b3cdc6 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -121,7 +121,7 @@
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 28ee389..b8ec002 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -188,7 +188,6 @@
 	if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
 	  goto bad_area;
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (error_code & ACE_USERMODE)
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!(error_code & ACE_USERMODE))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 76818f9..505a085 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -5,7 +5,7 @@
 
 config MICROBLAZE
 	def_bool y
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER
diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/lmb.h
deleted file mode 100644
index a0a0a92..0000000
--- a/arch/microblaze/include/asm/lmb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
-
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT	0xFFFFFFFF
-
-#endif /* _ASM_MICROBLAZE_LMB_H */
-
-
diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
new file mode 100644
index 0000000..f9c2fa3
--- /dev/null
+++ b/arch/microblaze/include/asm/memblock.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
+
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT	0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
+
+
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index de493f8..464ff32 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -34,6 +34,8 @@
 /* MS be sure that SLAB allocates aligned objects */
 #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index 9dcd90b..79c7465 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -90,7 +90,6 @@
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
-		sg->dma_length = sg->length;
 		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
 							sg->length, direction);
 	}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index a15ef6d..427b13b 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -29,7 +29,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -49,12 +49,12 @@
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	lmb_add(base, size);
+	memblock_add(base, size);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -104,8 +104,8 @@
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -113,9 +113,9 @@
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	lmb_analyze();
+	memblock_analyze();
 
-	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
 	pr_debug(" <- early_init_devtree()\n");
 }
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index cca3579..db59349 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -10,7 +10,7 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h> /* mem_init */
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
@@ -76,10 +76,10 @@
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		memory_start = (u32) lmb.memory.region[i].base;
-		memory_end = (u32) lmb.memory.region[i].base
-				+ (u32) lmb.memory.region[i].size;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		memory_start = (u32) memblock.memory.region[i].base;
+		memory_end = (u32) memblock.memory.region[i].base
+				+ (u32) memblock.memory.region[i].size;
 		if ((memory_start <= (u32)_text) &&
 					((u32)_text <= memory_end)) {
 			memory_size = memory_end - memory_start;
@@ -100,7 +100,7 @@
 	kernel_align_start = PAGE_DOWN((u32)_text);
 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
-	lmb_reserve(kernel_align_start, kernel_align_size);
+	memblock_reserve(kernel_align_start, kernel_align_size);
 	printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
@@ -141,18 +141,18 @@
 	map_size = init_bootmem_node(&contig_page_data,
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
 
 	/* reserve allocate blocks */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
+	for (i = 0; i < memblock.reserved.cnt; i++) {
 		pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
-			(u32) lmb.reserved.region[i].base,
-			(u32) lmb_size_bytes(&lmb.reserved, i));
-		reserve_bootmem(lmb.reserved.region[i].base,
-			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+			(u32) memblock.reserved.region[i].base,
+			(u32) memblock_size_bytes(&memblock.reserved, i));
+		reserve_bootmem(memblock.reserved.region[i].base,
+			memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
 #ifdef CONFIG_MMU
 	init_bootmem_done = 1;
@@ -235,7 +235,7 @@
 		if (maxmem && memory_size > maxmem) {
 			memory_size = maxmem;
 			memory_end = memory_start + memory_size;
-			lmb.memory.region[0].size = memory_size;
+			memblock.memory.region[0].size = memory_size;
 		}
 	}
 }
@@ -273,19 +273,19 @@
 {
 	unsigned int kstart, ksize;
 
-	if (!lmb.reserved.cnt) {
+	if (!memblock.reserved.cnt) {
 		printk(KERN_EMERG "Error memory count\n");
 		machine_restart(NULL);
 	}
 
-	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+	if ((u32) memblock.memory.region[0].size < 0x1000000) {
 		printk(KERN_EMERG "Memory must be greater than 16MB\n");
 		machine_restart(NULL);
 	}
 	/* Find main memory where the kernel is */
-	memory_start = (u32) lmb.memory.region[0].base;
-	memory_end = (u32) lmb.memory.region[0].base +
-				(u32) lmb.memory.region[0].size;
+	memory_start = (u32) memblock.memory.region[0].base;
+	memory_end = (u32) memblock.memory.region[0].base +
+				(u32) memblock.memory.region[0].size;
 	memory_size = memory_end - memory_start;
 
 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -297,7 +297,7 @@
 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 	/* kernel size */
 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
-	lmb_reserve(kstart, ksize);
+	memblock_reserve(kstart, ksize);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/* Remove the init RAM disk from the available memory. */
@@ -335,7 +335,7 @@
 		 * Mem start + 32MB -> here is limit
 		 * because of mem mapping from head.S
 		 */
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					memory_start + 0x2000000));
 	}
 	return p;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 9cb782b..23be25f 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1277,6 +1277,7 @@
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 2580e77..f9e5622 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -435,20 +435,21 @@
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int i;
+	int err, i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+	err = platform_add_devices(au1xxx_platform_devices,
+				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
 	/* Register second MAC if enabled in pinfunc */
-	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
 		platform_device_register(&au1xxx_eth1_device);
 #endif
 
-	return platform_add_devices(au1xxx_platform_devices,
-				    ARRAY_SIZE(au1xxx_platform_devices));
+	return err;
 }
 
 arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 14eb8c49..5ef06a1 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -193,9 +193,15 @@
 
 void au_sleep(void)
 {
-	save_core_regs();
-	au1xxx_save_and_sleep();
-	restore_core_regs();
+	int cpuid = alchemy_get_cputype();
+	if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+		save_core_regs();
+		if (cpuid <= ALCHEMY_CPU_AU1500)
+			alchemy_sleep_au1000();
+		else if (cpuid <= ALCHEMY_CPU_AU1200)
+			alchemy_sleep_au1550();
+		restore_core_regs();
+	}
 }
 
 #endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4f4b167..77f3c74 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -22,10 +22,9 @@
 	.set noat
 	.align	5
 
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
 	subu	sp, PT_SIZE
 	sw	$1, PT_R1(sp)
 	sw	$2, PT_R2(sp)
@@ -69,12 +68,32 @@
 	 */
 	lui	t3, 0xb190		/* sys_xxx */
 	sw	sp, 0x0018(t3)
-	la	k0, 3f			/* resume path */
+	la	k0, alchemy_sleep_wakeup	/* resume path */
 	sw	k0, 0x001c(t3)
+.endm
 
-	/* Put SDRAM into self refresh:  Preload instructions into cache,
-	 * issue a precharge, auto/self refresh, then sleep commands to it.
-	 */
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
 	.set	mips3
 	cache	0x14, 0(t0)
@@ -84,17 +103,32 @@
 	.set	mips0
 
 1:	lui 	a0, 0xb400		/* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) ||	\
-    defined(CONFIG_SOC_AU1500)
 	sw	zero, 0x001c(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
 	sw	zero, 0x0030(a0)  	/* Sleep */
 	sync
-#endif
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	mips3
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui 	a0, 0xb400		/* mem_xxx */
 	sw	zero, 0x08c0(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
@@ -114,26 +148,17 @@
 	and 	t1, t0, t1		/* clear CE[1:0] */
 	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
-#endif
 
-	/* put power supply and processor to sleep */
-	sw	zero, 0x0078(t3)	/* sys_slppwr */
-	sync
-	sw	zero, 0x007c(t3)	/* sys_sleep */
-	sync
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
 	 */
-3:	lw	k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
 	mtc0	k0, CP0_STATUS
 	lw	k0, 0x1c(sp)
 	mtc0	k0, CP0_CONTEXT
@@ -169,4 +194,4 @@
 	lw	$31, PT_R31(sp)
 	jr	ra
 	 addiu	sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index a9f0336..52d883d 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -67,8 +67,6 @@
 
 void __init board_setup(void)
 {
-	alchemy_gpio2_enable();
-
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	au_sync_udelay(1);
+	udelay(1);
 	return 1;
 }
 
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 566f2d7..8f31d1d 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -542,7 +542,7 @@
 	if (IS_ERR(bus_clk))
 		panic("unable to get bus clk\n");
 
-	uart_port.type		= PORT_16550A;
+	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
 	uart_port.iotype	= UPIO_MEM32;
 	uart_port.regshift	= 2;
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 35294b1..7465e8a 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
 # under Linux.
 #
 
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
new file mode 100644
index 0000000..06e03b2
--- /dev/null
+++ b/arch/mips/bcm47xx/nvram.c
@@ -0,0 +1,94 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+static char nvram_buf[NVRAM_SPACE];
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+	struct nvram_header *header;
+	int i;
+	u32 base, lim, off;
+	u32 *src, *dst;
+
+	base = mcore->flash_window;
+	lim = mcore->flash_window_size;
+
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		header = (struct nvram_header *)
+			KSEG1ADDR(base + off - NVRAM_SPACE);
+		if (header->magic == NVRAM_HEADER)
+			goto found;
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	return;
+
+found:
+	src = (u32 *) header;
+	dst = (u32 *) nvram_buf;
+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+		*dst++ = *src++;
+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+		*dst++ = le32_to_cpu(*src++);
+}
+
+int nvram_getenv(char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+
+	if (!name)
+		return 1;
+
+	if (!nvram_buf[0])
+		early_nvram_init();
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf) - 2;
+	end[0] = end[1] = '\0';
+	for (; *var; var = value + strlen(value) + 1) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if ((eq - var) == strlen(name) &&
+			strncmp(var, name, (eq - var)) == 0) {
+			snprintf(val, val_len, "%s", value);
+			return 0;
+		}
+	}
+	return 1;
+}
+EXPORT_SYMBOL(nvram_getenv);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index d442e11..b1aee33 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -1,8 +1,8 @@
 /*
  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -33,6 +33,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <asm/fw/cfe/cfe_api.h>
+#include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
 EXPORT_SYMBOL(ssb_bcm47xx);
@@ -81,28 +82,42 @@
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
 	/* Fill sprom structure */
 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
 	iv->sprom.revision = 3;
 
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et0mac);
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et1mac);
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
 
 	return 0;
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 9f544ba..39c2336 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,9 @@
 	if (unit > 1)
 		return -ENODEV;
 
+	if (unit == 1 && BCMCPU_IS_6338())
+		return -ENODEV;
+
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 59dc0c7..c63c56b 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -434,7 +434,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -524,10 +524,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -576,10 +576,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index f1cf389..483ffea 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -50,7 +50,7 @@
 #define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
 #define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
 
-#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_PERIPHERAL	0x0
 #define AR7_RESET_SOFTWARE	0x4
 #define AR7_RESET_STATUS	0x8
 
@@ -128,7 +128,7 @@
 static inline void ar7_device_enable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) | (1 << bit), reset_reg);
 	msleep(20);
 }
@@ -136,7 +136,7 @@
 static inline void ar7_device_disable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
 	msleep(20);
 }
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
index 73f9b16..abc317c 100644
--- a/arch/mips/include/asm/mach-ar7/gpio.h
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -24,7 +24,7 @@
 #define AR7_GPIO_MAX 32
 #define NR_BUILTIN_GPIO AR7_GPIO_MAX
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index e76941db..a697661 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -188,7 +188,8 @@
 extern unsigned long au1xxx_calc_clock(void);
 
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
-void au1xxx_save_and_sleep(void);
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
 void au_sleep(void);
 
 
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
new file mode 100644
index 0000000..0d8cc14
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2005, Broadcom Corporation
+ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+#include <linux/types.h>
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
+#define NVRAM_VERSION		1
+#define NVRAM_HEADER_SIZE	20
+#define NVRAM_SPACE		0x8000
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+extern int nvram_getenv(char *name, char *val, size_t val_len);
+
+#endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
index 7cda8c0..1eb534d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -3,7 +3,7 @@
 
 #include <bcm63xx_gpio.h>
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 1b5a664..baa318a 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -984,16 +984,17 @@
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
+#define __NR_getdents64			(__NR_Linux + 299)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		298
+#define __NR_Linux_syscalls		299
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		298
+#define __NR_N32_Linux_syscalls		299
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index e9e64e0..5a84a1f 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -2,7 +2,7 @@
  * Code for replacing ftrace calls with jumps.
  *
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * Thanks goes to Steven Rostedt for writing the original x86 version.
@@ -12,18 +12,62 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
-#include <asm/cacheflush.h>
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/uasm.h>
+
+/*
+ * If the Instruction Pointer is in module space (0xc0000000), return true;
+ * otherwise, it is in kernel space (0x80000000), return false.
+ *
+ * FIXME: This will not work when the kernel space and module space are the
+ * same. If they are the same, we need to modify scripts/recordmcount.pl,
+ * ftrace_make_nop/call() and the other related parts to ensure the
+ * enabling/disabling of the calling site to _mcount is right for both kernel
+ * and module.
+ */
+
+static inline int in_module(unsigned long ip)
+{
+	return ip & 0x40000000;
+}
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
-#define jump_insn_encode(op_code, addr) \
-	((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
 
-static unsigned int ftrace_nop = 0x00000000;
+#define INSN_B_1F_4 0x10000004	/* b 1f; offset = 4 */
+#define INSN_B_1F_5 0x10000005	/* b 1f; offset = 5 */
+#define INSN_NOP 0x00000000	/* nop */
+#define INSN_JAL(addr)	\
+	((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_lui_v1_hi16_mcount __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+	u32 *buf;
+	unsigned int v1;
+
+	/* lui v1, hi16_mcount */
+	v1 = 3;
+	buf = (u32 *)&insn_lui_v1_hi16_mcount;
+	UASM_i_LA_mostly(&buf, v1, MCOUNT_ADDR);
+
+	/* jal (ftrace_caller + 8), jump over the first two instruction */
+	buf = (u32 *)&insn_jal_ftrace_caller;
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* j ftrace_graph_caller */
+	buf = (u32 *)&insn_j_ftrace_graph_caller;
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+#endif
+}
 
 static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 {
@@ -40,67 +84,56 @@
 	return 0;
 }
 
-static int lui_v1;
-static int jal_mcount;
-
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
-	int faulted;
 	unsigned long ip = rec->ip;
 
-	/* We have compiled module with -mlong-calls, but compiled the kernel
-	 * without it, we need to cope with them respectively. */
-	if (ip & 0x40000000) {
-		/* record it for ftrace_make_call */
-		if (lui_v1 == 0) {
-			/* lui_v1 = *(unsigned int *)ip; */
-			safe_load_code(lui_v1, ip, faulted);
-
-			if (unlikely(faulted))
-				return -EFAULT;
-		}
-
-		/* lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+	/*
+	 * We have compiled module with -mlong-calls, but compiled the kernel
+	 * without it, we need to cope with them respectively.
+	 */
+	if (in_module(ip)) {
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000005)
+		 * addiu v1, v1, low_16bit_of_mcount
+		 * move at, ra
+		 * move $12, ra_address
+		 * jalr v1
+		 *  sub sp, sp, 8
+		 *                                  1: offset = 5 instructions
+		 */
+		new = INSN_B_1F_5;
+#else
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
 		 * addiu v1, v1, low_16bit_of_mcount
 		 * move at, ra
 		 * jalr v1
-		 * nop
-		 * 				     1f: (ip + 12)
+		 *  nop | move $12, ra_address | sub sp, sp, 8
+		 *                                  1: offset = 4 instructions
 		 */
-		new = 0x10000004;
+		new = INSN_B_1F_4;
+#endif
 	} else {
-		/* record/calculate it for ftrace_make_call */
-		if (jal_mcount == 0) {
-			/* We can record it directly like this:
-			 *     jal_mcount = *(unsigned int *)ip;
-			 * Herein, jump over the first two nop instructions */
-			jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
-		}
-
-		/* move at, ra
-		 * jalr v1		--> nop
+		/*
+		 * move at, ra
+		 * jal _mcount		--> nop
 		 */
-		new = ftrace_nop;
+		new = INSN_NOP;
 	}
 	return ftrace_modify_code(ip, new);
 }
 
-static int modified;	/* initialized as 0 by default */
-
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
-	/* We just need to remove the "b ftrace_stub" at the fist time! */
-	if (modified == 0) {
-		modified = 1;
-		ftrace_modify_code(addr, ftrace_nop);
-	}
 	/* ip, module: 0xc0000000, kernel: 0x80000000 */
-	new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+	new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
 
 	return ftrace_modify_code(ip, new);
 }
@@ -111,44 +144,48 @@
 {
 	unsigned int new;
 
-	new = jump_insn_encode(JAL, (unsigned long)func);
+	new = INSN_JAL((unsigned long)func);
 
 	return ftrace_modify_code(FTRACE_CALL_IP, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
+	/* Encode the instructions when booting */
+	ftrace_dyn_arch_init_insns();
+
+	/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+	ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
 	/* The return code is retured via data */
 	*(unsigned long *)data = 0;
 
 	return 0;
 }
-#endif				/* CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 extern void ftrace_graph_call(void);
-#define JMP	0x08000000	/* jump to target directly */
-#define CALL_FTRACE_GRAPH_CALLER \
-	jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
 #define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
 
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
-				  CALL_FTRACE_GRAPH_CALLER);
+			insn_j_ftrace_graph_caller);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
 }
 
-#endif				/* !CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
+
 #define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
 #define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
@@ -162,17 +199,17 @@
 	unsigned int code;
 	int faulted;
 
-	/* in module or kernel? */
-	if (self_addr & 0x40000000) {
-		/* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
-		ip = self_addr - 20;
-	} else {
-		/* kernel: move to the instruction "move ra, at" */
-		ip = self_addr - 12;
-	}
+	/*
+	 * For module, move the ip from calling site of mcount to the
+	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
+	 * kernel, move to the instruction "move ra, at"(offset is 12)
+	 */
+	ip = self_addr - (in_module(self_addr) ? 20 : 12);
 
-	/* search the text until finding the non-store instruction or "s{d,w}
-	 * ra, offset(sp)" instruction */
+	/*
+	 * search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction
+	 */
 	do {
 		ip -= 4;
 
@@ -181,10 +218,11 @@
 
 		if (unlikely(faulted))
 			return 0;
-
-		/* If we hit the non-store instruction before finding where the
+		/*
+		 * If we hit the non-store instruction before finding where the
 		 * ra is stored, then this is a leaf function and it does not
-		 * store the ra on the stack. */
+		 * store the ra on the stack
+		 */
 		if ((code & S_R_SP) != S_R_SP)
 			return parent_addr;
 
@@ -202,7 +240,7 @@
 	return 0;
 }
 
-#endif
+#endif	/* !KBUILD_MCOUNT_RA_ADDRESS */
 
 /*
  * Hook the return address and push it in the stack of return addrs
@@ -220,7 +258,8 @@
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	/* "parent" is the stack address saved the return address of the caller
+	/*
+	 * "parent" is the stack address saved the return address of the caller
 	 * of _mcount.
 	 *
 	 * if the gcc < 4.5, a leaf function does not save the return address
@@ -242,10 +281,11 @@
 		goto out;
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
 	parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
-							 (unsigned long)parent,
-							 fp);
-	/* If fails when getting the stack address of the non-leaf function's
-	 * ra, stop function graph tracer and return */
+			(unsigned long)parent, fp);
+	/*
+	 * If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return
+	 */
 	if (parent == 0)
 		goto out;
 #endif
@@ -272,4 +312,4 @@
 	ftrace_graph_stop();
 	WARN_ON(1);
 }
-#endif				/* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 6851fc9..6bfcb7a 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -6,6 +6,7 @@
  * more details.
  *
  * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
@@ -45,8 +46,6 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#endif
-#ifdef CONFIG_64BIT
 	PTR_ADDIU	sp, PT_SIZE
 #else
 	PTR_ADDIU	sp, (PT_SIZE + 8)
@@ -58,6 +57,12 @@
 	 move ra, AT
 	.endm
 
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG	$12
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 NESTED(ftrace_caller, PT_SIZE, ra)
@@ -71,14 +76,14 @@
 
 	MCOUNT_SAVE_REGS
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_S	t0, PT_R12(sp)	/* t0 saved the location of the return address(at) by -mmcount-ra-address */
+	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call
@@ -119,9 +124,9 @@
 static_trace:
 	MCOUNT_SAVE_REGS
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	jalr	t2		/* (1) call *ftrace_trace_function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 	MCOUNT_RESTORE_REGS
 	.globl ftrace_stub
@@ -134,28 +139,34 @@
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 NESTED(ftrace_graph_caller, PT_SIZE, ra)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	PTR_L	a1, PT_R31(sp)	/* load the original ra from the stack */
-#ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_L	t0, PT_R12(sp)	/* load the original t0 from the stack */
-#endif
-#else
+#ifndef CONFIG_DYNAMIC_FTRACE
 	MCOUNT_SAVE_REGS
-	move	a1, ra		/* arg2: next ip, selfaddr */
 #endif
 
+	/* arg1: Get the location of the parent's return address */
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	bnez	t0, 1f		/* non-leaf func: t0 saved the location of the return address */
-	 nop
-	PTR_LA	t0, PT_R1(sp)	/* leaf func: get the location of at(old ra) from our own stack */
-1:	move	a0, t0		/* arg1: the location of the return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a0, PT_R12(sp)
 #else
-	PTR_LA	a0, PT_R1(sp)	/* arg1: &AT -> a0 */
+	move	a0, MCOUNT_RA_ADDRESS_REG
 #endif
-	jal	prepare_ftrace_return
-#ifdef CONFIG_FRAME_POINTER
-	 move	a2, fp		/* arg3: frame pointer */
+	bnez	a0, 1f	/* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
+	 nop
+#endif
+	PTR_LA	a0, PT_R1(sp)	/* leaf func: the location in current stack */
+1:
+
+	/* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)
 #else
+	move	a1, ra
+#endif
+
+	/* arg3: Get frame pointer of current stack */
+#ifdef CONFIG_FRAME_POINTER
+	 move	a2, fp
+#else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
 	 PTR_LA	a2, PT_SIZE(sp)
 #else
@@ -163,6 +174,8 @@
 #endif
 #endif
 
+	jal	prepare_ftrace_return
+	 nop
 	MCOUNT_RESTORE_REGS
 	RETURN_BACK
 	END(ftrace_graph_caller)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index f5981c4..2340f11 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 #include <linux/cpu.h>
+#include <linux/cpuset.h>
 #include <linux/cpumask.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -39,6 +40,21 @@
 	return pid ? find_task_by_vpid(pid) : current;
 }
 
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+	const struct cred *cred = current_cred(), *pcred;
+	bool match;
+
+	rcu_read_lock();
+	pcred = __task_cred(p);
+	match = (cred->euid == pcred->euid ||
+		 cred->euid == pcred->uid);
+	rcu_read_unlock();
+	return match;
+}
 
 /*
  * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
@@ -46,12 +62,10 @@
 asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 				      unsigned long __user *user_mask_ptr)
 {
-	cpumask_t new_mask;
-	cpumask_t effective_mask;
-	int retval;
-	struct task_struct *p;
+	cpumask_var_t cpus_allowed, new_mask, effective_mask;
 	struct thread_info *ti;
-	uid_t euid;
+	struct task_struct *p;
+	int retval;
 
 	if (len < sizeof(new_mask))
 		return -EINVAL;
@@ -60,53 +74,74 @@
 		return -EFAULT;
 
 	get_online_cpus();
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 
 	p = find_process_by_pid(pid);
 	if (!p) {
-		read_unlock(&tasklist_lock);
+		rcu_read_unlock();
 		put_online_cpus();
 		return -ESRCH;
 	}
 
-	/*
-	 * It is not safe to call set_cpus_allowed with the
-	 * tasklist_lock held.  We will bump the task_struct's
-	 * usage count and drop tasklist_lock before invoking
-	 * set_cpus_allowed.
-	 */
+	/* Prevent p going away */
 	get_task_struct(p);
+	rcu_read_unlock();
 
-	euid = current_euid();
-	retval = -EPERM;
-	if (euid != p->cred->euid && euid != p->cred->uid &&
-	    !capable(CAP_SYS_NICE)) {
-		read_unlock(&tasklist_lock);
-		goto out_unlock;
+	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_put_task;
 	}
+	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_cpus_allowed;
+	}
+	if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_new_mask;
+	}
+	retval = -EPERM;
+	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
+		goto out_unlock;
 
 	retval = security_task_setscheduler(p, 0, NULL);
 	if (retval)
 		goto out_unlock;
 
 	/* Record new user-specified CPU set for future reference */
-	p->thread.user_cpus_allowed = new_mask;
+	cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
 
-	/* Unlock the task list */
-	read_unlock(&tasklist_lock);
-
+ again:
 	/* Compute new global allowed CPU set if necessary */
 	ti = task_thread_info(p);
 	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
-	    cpus_intersects(new_mask, mt_fpu_cpumask)) {
-		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed_ptr(p, &effective_mask);
+	    cpus_intersects(*new_mask, mt_fpu_cpumask)) {
+		cpus_and(*effective_mask, *new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed_ptr(p, effective_mask);
 	} else {
+		cpumask_copy(effective_mask, new_mask);
 		clear_ti_thread_flag(ti, TIF_FPUBOUND);
-		retval = set_cpus_allowed_ptr(p, &new_mask);
+		retval = set_cpus_allowed_ptr(p, new_mask);
 	}
 
+	if (!retval) {
+		cpuset_cpus_allowed(p, cpus_allowed);
+		if (!cpumask_subset(effective_mask, cpus_allowed)) {
+			/*
+			 * We must have raced with a concurrent cpuset
+			 * update. Just reset the cpus_allowed to the
+			 * cpuset's cpus_allowed
+			 */
+			cpumask_copy(new_mask, cpus_allowed);
+			goto again;
+		}
+	}
 out_unlock:
+	free_cpumask_var(effective_mask);
+out_free_new_mask:
+	free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+	free_cpumask_var(cpus_allowed);
+out_put_task:
 	put_task_struct(p);
 	put_online_cpus();
 	return retval;
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a5297e2..a4facee 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -419,4 +419,5 @@
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
+	PTR     sys_getdents
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 8bdd6a6..8527808 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -976,7 +976,7 @@
 
 	case 2:
 		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
-		break;
+		return;
 
 	case 3:
 		break;
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index b773c11..e5cdfd6 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -61,11 +61,9 @@
 
 	vunmap(vdso);
 
-	pr_notice("init_vdso successfull\n");
-
 	return 0;
 }
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
 
 static unsigned long vdso_addr(unsigned long start)
 {
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 3df1967..c97ca69 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -23,6 +23,7 @@
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
+	select LOONGSON_MC146818
 	help
 	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
@@ -51,6 +52,7 @@
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
 	help
 	  Lemote Loongson 2F family machines utilize the 2F revision of
 	  Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@
 	bool
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index cdd2e81..e526488 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -12,6 +12,7 @@
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_SERIAL_8250) += serial.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
 # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index eaf8b86..5b5cbba6 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -49,6 +49,8 @@
 			lo |= SOFT_BAR_EHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 9a96b56..681d129 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -51,6 +51,7 @@
 			lo |= SOFT_BAR_IDE_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if (value & 0x01) {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
 			lo = (value & 0xfffffff0) | 0x1;
 			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
 
@@ -65,19 +66,30 @@
 			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
 			lo |= 0x01;
 			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+			lo = value;
 			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		}
 		break;
 	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
 		break;
 	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
 		break;
 	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
 		break;
 	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
 		break;
 	default:
@@ -167,6 +179,7 @@
 	case PCI_IDE_ETC_REG:
 		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
 		conf_data = lo;
+		break;
 	case PCI_IDE_PM_REG:
 		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
 		conf_data = lo;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index f5c0818..4d9f65a 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -61,7 +61,7 @@
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
@@ -76,7 +76,7 @@
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index db5900aad..bdedf51 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -49,6 +49,8 @@
 			lo |= SOFT_BAR_OHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
new file mode 100644
index 0000000..a90d87c
--- /dev/null
+++ b/arch/mips/loongson/common/rtc.c
@@ -0,0 +1,43 @@
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index d9ae1db..b909742 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -78,6 +78,7 @@
 	DPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
 	}
 
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index 3175477..2fd53c9 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -78,6 +78,7 @@
 	SPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
 	}
 
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2fbfa1a..bf80921 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -247,6 +247,8 @@
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
+	controller->io_map_base = mips_io_port_base;
+
 	register_pci_controller(controller);
 }
 
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
index eee4f3d..98e86dd 100644
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ b/arch/mips/nxp/pnx8550/common/pci.c
@@ -44,6 +44,7 @@
 
 static struct pci_controller pnx8550_controller = {
 	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
 };
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 2aed50f..64246c9 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -113,7 +113,7 @@
 	PNX8550_GLB2_ENAB_INTA_O = 0;
 
 	/* IO/MEM resources. */
-	set_io_port_base(KSEG1);
+	set_io_port_base(PNX8550_PORT_BASE);
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 	iomem_resource.start = 0;
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index d0d24e0..60d3ea6 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -43,6 +43,12 @@
 static char *oprofid = "LoongsonPerf";
 static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
 
+static void reset_counters(void *arg)
+{
+	write_c0_perfctrl(0);
+	write_c0_perfcnt(0);
+}
+
 static void loongson2_reg_setup(struct op_counter_config *cfg)
 {
 	unsigned int ctrl = 0;
@@ -139,7 +145,7 @@
 
 static void loongson2_exit(void)
 {
-	write_c0_perfctrl(0);
+	reset_counters(NULL);
 	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
 }
 
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 04b3147..b7c03d8 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -944,6 +944,7 @@
 	.pci_ops	= &msp_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0,
+	.io_map_base	= MSP_PCI_IOSPACE_BASE,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0
 };
diff --git a/arch/mips/pci/pci-yosemite.c b/arch/mips/pci/pci-yosemite.c
index 0357946f..cf5e1a2 100644
--- a/arch/mips/pci/pci-yosemite.c
+++ b/arch/mips/pci/pci-yosemite.c
@@ -54,6 +54,7 @@
 		panic(ioremap_failed);
 
 	set_io_port_base(io_v_base);
+	py_controller.io_map_base = io_v_base;
 	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
 
 	ioport_resource.end = TITAN_IO_SIZE - 1;
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 8ee7788..9ec523e 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -472,6 +472,9 @@
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
 		chipversion  = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@
 		else
 			asic = ASIC_CRONUSLITE;
 
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 53bb17d..81f153fa5 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -338,11 +338,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	monitor_signal(regs);
-	printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
-	if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
-		do_exit(SIGKILL);
-	goto no_context;
+	if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index d6119b8..45b40ac 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -117,6 +117,7 @@
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range. */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 328774b..2031a28 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -132,7 +132,7 @@
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -400,7 +400,7 @@
 
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
-	default y
+	default n
 	help
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
@@ -409,7 +409,7 @@
 	  ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
 	    out the irq_desc[] array in a more NUMA-friendly way. )
 
-	  If you don't know what to do here, say Y.
+	  If you don't know what to do here, say N.
 
 config NUMA
 	bool "NUMA support"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 53696da..2d38a50 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -135,13 +135,6 @@
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 42dcd3f4..77cfe7a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -92,10 +92,10 @@
 else
 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
-else
-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
 endif
 
+LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+
 ifeq ($(CONFIG_TUNE_CELL),y)
 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
 endif
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ad0df7d..fae8192 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -141,7 +141,7 @@
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446..0000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b1..179a178 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63b..59702ac 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 8e95f8d..4aa17b6 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 918f23f..9a5f1ab 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index f87ef03..0b45213 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 19fbcb0..4d2de0b 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index eb41cd69..a1f3f50 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 416e79a..c763135 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -77,8 +77,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index bfff0ea..6597b2f 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1f6d049..2d3dfb5 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 788faac..51a00c4 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 4ef8bca..1028b1b 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index ca17b14..69f5633 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index e3149ba..dcd859c 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index af244e1..a2c24d1 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -97,8 +97,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 8fed3b2..3bb55b5 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index a67ec91..684f40d 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 886cb6a..e202924 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -103,8 +103,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 1b2f41d..c348a46 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 12041d3..f4cb7e8 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 2518b856..c7ead0e 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -80,8 +80,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 218d49b..7664c83 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 90492ff2..eac7c17 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -96,8 +96,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index dffc8ca..27afb6e 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 3cb2a52..5fe39dd 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -98,8 +98,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 96181c6..a108b84 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 183c59c..b728a7d 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 1524d94..8e738de 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 767c204..59bf9e2 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 55b9e4e..4e8b01e 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -98,8 +98,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 1be38eb..20fde63 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a6300945..74f714d 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -102,8 +102,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 9f89d5c..a670cee 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -92,8 +92,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index b63cc38..851287e 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -87,8 +87,7 @@
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 4ab6074..b429a65 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -102,8 +102,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c6d2baa..9433719 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -83,8 +83,7 @@
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index d212377..6be6c09 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -78,8 +78,7 @@
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5094a65..2fdab66 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -77,8 +77,7 @@
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 81e904e..6b70839 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c5af46e..1cee889 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -91,8 +91,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 826a65d..57d3ffa 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -82,8 +82,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 942e119..1c2dbf0 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a211a79..a60d61b 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -73,7 +73,6 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 76982c5..151c8e1 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -81,8 +81,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 588a2ad..8ecacf7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -97,8 +97,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b24400..dc50eec 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -78,8 +78,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 0cbd56f..b36ebb7 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index c1be261..0dd5015 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -90,8 +90,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index a047272..aa2654e 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -97,8 +97,7 @@
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7012ac0..f875ec2 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -97,8 +97,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 27c63ce..b1e88fe 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 20ba0cf..74a7216 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8870a..753bb791 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -93,8 +93,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 35b6068..afb4d1b 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -99,8 +99,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 46f5c47..bd3d23f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -103,8 +103,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index dad617e..369f4e0 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -93,8 +93,7 @@
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 8195f16..403e82e 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -107,8 +107,7 @@
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 68c175e..12c8ee8 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 93f4505..a18f597 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -98,8 +98,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 16a1458..16ae717 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -92,8 +92,7 @@
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b162580..01be0e2 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index c386828..ee054f8 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5a..9a846ef 100644
--- a/arch/powerpc/include/asm/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -12,7 +12,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/types.h>
 #include <asm/page.h>
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb9..e50323f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
 #include <linux/of.h>
 
 /*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
+/*
  * USB Controller pram common to QE and CPM.
  */
 struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b0119..bd07650d 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054bae..ecba37a 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -358,7 +358,6 @@
 #define exc_lvl_ctx_init()
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
@@ -369,11 +368,6 @@
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
 extern void do_IRQ(struct pt_regs *regs);
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index 5ebfe5d..6857af5 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -3,8 +3,17 @@
 
 #include <asm/page.h>
 
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE	0x4000000
+#else
 #define KDUMP_KERNELBASE	0x2000000
+#endif
 
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 2a9cd74..076327f 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -8,9 +8,9 @@
  * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
  * and therefore we can only deal with memory within this range
  */
-#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
-#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
-#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
 
 #else
 
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
deleted file mode 100644
index 6f5fdf0..0000000
--- a/arch/powerpc/include/asm/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
new file mode 100644
index 0000000..3c29728
--- /dev/null
+++ b/arch/powerpc/include/asm/memblock.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2102b21..0e398cf 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -250,7 +250,9 @@
 int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+			       unsigned long vsid, unsigned long trap,
+			       int ssize, int psize, unsigned long pte);
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 5d8be04..0175a676 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -24,11 +24,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __KERNEL__
 #include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
 
 #ifndef __ASSEMBLY__
 
@@ -364,13 +360,13 @@
 #ifndef __ASSEMBLY__
 
 struct ppc_debug_info {
-	uint32_t version;		/* Only version 1 exists to date */
-	uint32_t num_instruction_bps;
-	uint32_t num_data_bps;
-	uint32_t num_condition_regs;
-	uint32_t data_bp_alignment;
-	uint32_t sizeof_condition;	/* size of the DVC register */
-	uint64_t features;
+	__u32 version;			/* Only version 1 exists to date */
+	__u32 num_instruction_bps;
+	__u32 num_data_bps;
+	__u32 num_condition_regs;
+	__u32 data_bp_alignment;
+	__u32 sizeof_condition;		/* size of the DVC register */
+	__u64 features;
 };
 
 #endif /* __ASSEMBLY__ */
@@ -386,13 +382,13 @@
 #ifndef __ASSEMBLY__
 
 struct ppc_hw_breakpoint {
-	uint32_t version;		/* currently, version must be 1 */
-	uint32_t trigger_type;		/* only some combinations allowed */
-	uint32_t addr_mode;		/* address match mode */
-	uint32_t condition_mode;	/* break/watchpoint condition flags */
-	uint64_t addr;			/* break/watchpoint address */
-	uint64_t addr2;			/* range end or mask */
-	uint64_t condition_value;	/* contents of the DVC register */
+	__u32 version;		/* currently, version must be 1 */
+	__u32 trigger_type;	/* only some combinations allowed */
+	__u32 addr_mode;	/* address match mode */
+	__u32 condition_mode;	/* break/watchpoint condition flags */
+	__u64 addr;		/* break/watchpoint address */
+	__u64 addr2;		/* range end or mask */
+	__u64 condition_value;	/* contents of the DVC register */
 };
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 26e5863..625942a 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index b46f2e0..417f7b0 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -447,7 +447,7 @@
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
 	crash_kexec_stop_spus();
-#ifdef CONFIG_PPC_STD_MMU_64
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
 	crash_kexec_wait_realmode(crashing_cpu);
 #endif
 	if (ppc_md.kexec_cpu_down)
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 5fb667a..40f5246 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,7 +13,7 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -33,7 +33,7 @@
 #ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
 }
 
 static void __init create_trampoline(unsigned long addr)
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e7fe218..02f724f 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -71,7 +71,7 @@
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 8d1de6f..84d6367e 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -9,7 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -89,7 +89,7 @@
 	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= (lmb_end_of_DRAM() - 1);
+	return mask >= (memblock_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index beb4d78..a92c79b 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -205,8 +205,7 @@
 	bdnz+   next_tlb_setup
 
 /* 7. Jump to our 1:1 mapping */
-	li	r6, 0
-
+	mr	r6, r25
 #else
 	#error You need to specify the mapping or not use this at all.
 #endif
@@ -217,7 +216,6 @@
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
 	addi	r6,r6,(2f - 1b)
-	add	r6, r6, r25
 	mtspr	SPRN_SRR0,r6
 	mtspr	SPRN_SRR1,r7
 	rfi				/* start execution out of TLB1[0] entry */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 30817d9..77be3d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -295,7 +295,10 @@
 
 	for_each_irq(irq) {
 		desc = irq_to_desc(irq);
-		if (desc && desc->status & IRQ_PER_CPU)
+		if (!desc)
+			continue;
+
+		if (desc->status & IRQ_PER_CPU)
 			continue;
 
 		cpumask_and(mask, desc->affinity, map);
@@ -317,7 +320,6 @@
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 static inline void handle_one_irq(unsigned int irq)
 {
 	struct thread_info *curtp, *irqtp;
@@ -358,12 +360,6 @@
 	if (irqtp->flags)
 		set_bits(irqtp->flags, &curtp->flags);
 }
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
-	generic_handle_irq(irq);
-}
-#endif
 
 static inline void check_stack_overflow(void)
 {
@@ -455,7 +451,6 @@
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
@@ -492,10 +487,6 @@
 	irqtp->task = NULL;
 }
 
-#else
-#define do_softirq_onstack()	__do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
 void do_softirq(void)
 {
 	unsigned long flags;
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index bb3d893..89f0051 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,7 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -66,11 +66,11 @@
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -133,9 +133,9 @@
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(lmb_phys_mem_size() >> 20));
+			(unsigned long)(memblock_phys_mem_size() >> 20));
 
-	lmb_reserve(crashk_res.start, crash_size);
+	memblock_reserve(crashk_res.start, crash_size);
 }
 
 int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26f9900..ed31a29 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -182,28 +182,12 @@
 
 	my_cpu = get_cpu();
 	/* Make sure each CPU has atleast made it to the state we need */
-	for (i=0; i < NR_CPUS; i++) {
+	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
 
 		while (paca[i].kexec_state < wait_state) {
 			barrier();
-			if (!cpu_possible(i)) {
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" possible, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
-			if (!cpu_online(i)) {
-				/* Fixme: this can be spinning in
-				 * pSeries_secondary_wait with a paca
-				 * waiting for it to go online.
-				 */
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" online, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
 			if (i != notified) {
 				printk( "kexec: waiting for cpu %d (physical"
 						" %d) to enter %i state\n",
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index dc66d52..6bbd7a60 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -33,7 +33,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
@@ -56,7 +55,6 @@
 	lwz	r0,4(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 /*
  * This returns the high 64 bits of the product of two 64-bit numbers.
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index a2b18df..e514490 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -28,7 +28,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	std	r0,16(r1)
@@ -52,7 +51,6 @@
 	ld	r0,16(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 	.section	".toc","aw"
 PPC64_CACHES:
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f88acf0..139a773 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,7 +9,7 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
@@ -117,7 +117,7 @@
 	 * the first segment. On iSeries they must be within the area mapped
 	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(0x10000000ULL, memblock.rmo_size);
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
@@ -128,7 +128,7 @@
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
 
-	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
@@ -148,7 +148,7 @@
 	if (new_size >= paca_size)
 		return;
 
-	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+	memblock_free(__pa(paca) + new_size, paca_size - new_size);
 
 	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
 		paca_size - new_size);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6646005..5b38f6a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1309,6 +1309,7 @@
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 43b83c3..5c14ffe 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -791,8 +791,11 @@
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	for (i = 0; i < cpuhw->n_events; ++i) {
 		if (event == cpuhw->event[i]) {
-			while (++i < cpuhw->n_events)
+			while (++i < cpuhw->n_events) {
 				cpuhw->event[i-1] = cpuhw->event[i];
+				cpuhw->events[i-1] = cpuhw->events[i];
+				cpuhw->flags[i-1] = cpuhw->flags[i];
+			}
 			--cpuhw->n_events;
 			ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
 			if (event->hw.idx) {
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index 369872f..babccee 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -566,9 +566,9 @@
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, 0);
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9d255b4..773424d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1005,7 +1005,6 @@
 	return error;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 				  unsigned long nbytes)
 {
@@ -1030,10 +1029,6 @@
 	return 0;
 }
 
-#else
-#define valid_irq_stack(sp, p, nb)	0
-#endif /* CONFIG_IRQSTACKS */
-
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05131d6..fed9bf6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,7 +31,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -98,7 +98,7 @@
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
-		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = (struct boot_param_header *)p;
 		DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@
 {
 	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
-	u64 base, size, lmb_size;
+	u64 base, size, memblock_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
-	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
 	if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@
 		   or if the block is not assigned to this partition (0x8) */
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
-		size = lmb_size;
+		size = memblock_size;
 		rngs = 1;
 		if (is_kexec_kdump) {
 			/*
-			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * For each memblock in ibm,dynamic-memory, a corresponding
 			 * entry in linux,drconf-usable-memory property contains
 			 * a counter 'p' followed by 'p' (base, size) duple.
 			 * Now read the counter from
@@ -469,10 +469,10 @@
 				if ((base + size) > 0x80000000ul)
 					size = 0x80000000ul - base;
 			}
-			lmb_add(base, size);
+			memblock_add(base, size);
 		} while (--rngs);
 	}
-	lmb_dump_all();
+	memblock_dump_all();
 	return 0;
 }
 #else
@@ -501,14 +501,14 @@
 	}
 #endif
 
-	lmb_add(base, size);
+	memblock_add(base, size);
 
 	memstart_addr = min((u64)memstart_addr, base);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
 	self_size = initial_boot_params->totalsize;
-	lmb_reserve(self_base, self_size);
+	memblock_reserve(self_base, self_size);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* then reserve the initrd, if any */
 	if (initrd_start && (initrd_end > initrd_start))
-		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@
 			if (base_32 == self_base && size_32 == self_size)
 				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
-			lmb_reserve(base_32, size_32);
+			memblock_reserve(base_32, size_32);
 		}
 		return;
 	}
@@ -571,7 +571,7 @@
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 	}
 }
 
@@ -594,7 +594,7 @@
 		return phyp_dump_info->reserve_bootvar;
 
 	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
+	tmp = memblock_end_of_DRAM();
 	do_div(tmp, 20);
 
 	/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@
 	if (phyp_dump_info->phyp_dump_is_active) {
 		/* Reserve *everything* above RMR.Area freed by userland tools*/
 		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
+		size = memblock_end_of_DRAM() - base;
 
 		/* XXX crashed_ram_end is wrong, since it may be beyond
 		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@
 		size = phyp_dump_info->cpu_state_size +
 			phyp_dump_info->hpte_region_size +
 			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
 	}
@@ -681,8 +681,8 @@
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -690,11 +690,11 @@
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
-	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
 	if (PHYSICAL_START > MEMORY_START)
-		lmb_reserve(MEMORY_START, 0x8000);
+		memblock_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
@@ -706,17 +706,17 @@
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
-		lmb_analyze();
-		memsize = lmb_phys_mem_size();
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
 		if ((memsize & PAGE_MASK) != memsize)
 			limit = memsize & PAGE_MASK;
 	}
-	lmb_enforce_memory_limit(limit);
+	memblock_enforce_memory_limit(limit);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 97d4bd9..3b6f8ae 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -872,7 +872,7 @@
 				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
 				    *cores);
 		} else {
-			*cores = NR_CPUS / prom_count_smt_threads();
+			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
 			prom_printf("Max number of cores passed to firmware: 0x%x\n",
 				    (unsigned long)*cores);
 		}
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 1ac136b..9f82f49 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -52,12 +52,18 @@
 	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
 		OK=1
 	fi
 	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
 		OK=1
 	fi
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 0e1ec6f..d0516db 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,7 +22,7 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/prom.h>
@@ -934,11 +934,11 @@
 	 */
 #ifdef CONFIG_PPC64
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
-		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+		rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}
 #endif
-	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+	rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index bfc2aba..67a84d8 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -94,12 +94,8 @@
 	struct flash_block_list *next;
 	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
 };
-struct flash_block_list_header { /* just the header of flash_block_list */
-	unsigned long num_blocks;
-	struct flash_block_list *next;
-};
 
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
 
 /* Use slab cache to guarantee 4k alignment */
 static struct kmem_cache *flash_block_cache = NULL;
@@ -108,13 +104,14 @@
 
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go.  The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
  * is treated as the number of entries currently in the block
- * (i.e. not a byte count).  This is all fixed on release.
+ * (i.e. not a byte count).  This is all fixed when calling 
+ * the flash routine.
  */
 
 /* Status int must be first member of struct */
@@ -201,16 +198,16 @@
 	if (uf->flist) {    
 		/* File was opened in write mode for a new flash attempt */
 		/* Clear saved list */
-		if (rtas_firmware_flash_list.next) {
-			free_flash_list(rtas_firmware_flash_list.next);
-			rtas_firmware_flash_list.next = NULL;
+		if (rtas_firmware_flash_list) {
+			free_flash_list(rtas_firmware_flash_list);
+			rtas_firmware_flash_list = NULL;
 		}
 
 		if (uf->status != FLASH_AUTH)  
 			uf->status = flash_list_valid(uf->flist);
 
 		if (uf->status == FLASH_IMG_READY) 
-			rtas_firmware_flash_list.next = uf->flist;
+			rtas_firmware_flash_list = uf->flist;
 		else
 			free_flash_list(uf->flist);
 
@@ -593,7 +590,7 @@
 	unsigned long rtas_block_list;
 	int i, status, update_token;
 
-	if (rtas_firmware_flash_list.next == NULL)
+	if (rtas_firmware_flash_list == NULL)
 		return;		/* nothing to do */
 
 	if (reboot_type != SYS_RESTART) {
@@ -610,20 +607,25 @@
 		return;
 	}
 
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
+	/*
+	 * NOTE: the "first" block must be under 4GB, so we create
+	 * an entry with no data blocks in the reserved buffer in
+	 * the kernel data segment.
 	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	spin_lock(&rtas_data_buf_lock);
+	flist = (struct flash_block_list *)&rtas_data_buf[0];
+	flist->num_blocks = 0;
+	flist->next = rtas_firmware_flash_list;
 	rtas_block_list = virt_to_abs(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		spin_unlock(&rtas_data_buf_lock);
 		return;
 	}
 
 	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
 	/* Update the block_list in place. */
+	rtas_firmware_flash_list = NULL; /* too hard to backout on error */
 	image_size = 0;
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
@@ -664,6 +666,7 @@
 		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
 		break;
 	}
+	spin_unlock(&rtas_data_buf_lock);
 }
 
 static void remove_flash_pde(struct proc_dir_entry *dp)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 5e4d852..b7e6c7e 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -33,7 +33,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 #include <asm/paca.h>
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 8f58986..a10ffc8 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -16,7 +16,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -241,23 +241,19 @@
 
 arch_initcall(ppc_init);
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 static void __init exc_lvl_early_init(void)
@@ -265,15 +261,15 @@
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #ifdef CONFIG_BOOKE
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #endif
 	}
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f3fb5a7..d135f93 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,7 +34,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -158,7 +158,7 @@
  * the CPU that ignores the top 2 bits of the address in real
  * mode so we can access kernel globals normally provided we
  * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
  * data structures, and allocate & initialize the hash table
  * and segment tables so we can start running with translation
  * enabled.
@@ -404,7 +404,7 @@
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
+	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -432,7 +432,6 @@
 	return 1UL << SID_SHIFT;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	u64 limit = slb0_limit();
@@ -444,16 +443,13 @@
 	 */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
@@ -462,11 +458,11 @@
 
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 #else
@@ -491,11 +487,11 @@
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(slb0_limit(), lmb.rmo_size);
+	limit = min(slb0_limit(), memblock.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
-		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
 		sp += THREAD_SIZE;
 		paca[i].emergency_sp = __va(sp);
 	}
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d84d192..13002fe 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -734,7 +734,7 @@
 	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		vdso_data->platform |= 1;
-	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->physicalMemorySize = memblock_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;
 	vdso_data->icache_size = ppc64_caches.isize;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index bc2b400..e8a00b0 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -164,7 +164,7 @@
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), 0, THIS_MODULE);
 }
 
-static void __init kvmppc_e500_exit(void)
+static void __exit kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 3040dac..111da1c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -12,8 +12,8 @@
 CFLAGS_REMOVE_feature-fixups.o = -pg
 
 obj-y			:= string.o alloc.o \
-			   checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
+			   checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
index 70a9cd8..1c893f0 100644
--- a/arch/powerpc/lib/crtsavres.S
+++ b/arch/powerpc/lib/crtsavres.S
@@ -6,6 +6,7 @@
  *   Written By Michael Meissner
  *
  * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ * 64 bit additions from reading the PPC elf64abi document.
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -44,6 +45,8 @@
 
 #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
+#ifndef CONFIG_PPC64
+
 /* Routines for saving integer registers, called by the compiler.  */
 /* Called with r11 pointing to the stack header word of the caller of the */
 /* function, just beyond the end of the integer save area.  */
@@ -226,4 +229,130 @@
 	mtlr	0
 	mr	1,11
 	blr
+
+#else /* CONFIG_PPC64 */
+
+.globl	_savegpr0_14
+_savegpr0_14:
+	std	r14,-144(r1)
+.globl	_savegpr0_15
+_savegpr0_15:
+	std	r15,-136(r1)
+.globl	_savegpr0_16
+_savegpr0_16:
+	std	r16,-128(r1)
+.globl	_savegpr0_17
+_savegpr0_17:
+	std	r17,-120(r1)
+.globl	_savegpr0_18
+_savegpr0_18:
+	std	r18,-112(r1)
+.globl	_savegpr0_19
+_savegpr0_19:
+	std	r19,-104(r1)
+.globl	_savegpr0_20
+_savegpr0_20:
+	std	r20,-96(r1)
+.globl	_savegpr0_21
+_savegpr0_21:
+	std	r21,-88(r1)
+.globl	_savegpr0_22
+_savegpr0_22:
+	std	r22,-80(r1)
+.globl	_savegpr0_23
+_savegpr0_23:
+	std	r23,-72(r1)
+.globl	_savegpr0_24
+_savegpr0_24:
+	std	r24,-64(r1)
+.globl	_savegpr0_25
+_savegpr0_25:
+	std	r25,-56(r1)
+.globl	_savegpr0_26
+_savegpr0_26:
+	std	r26,-48(r1)
+.globl	_savegpr0_27
+_savegpr0_27:
+	std	r27,-40(r1)
+.globl	_savegpr0_28
+_savegpr0_28:
+	std	r28,-32(r1)
+.globl	_savegpr0_29
+_savegpr0_29:
+	std	r29,-24(r1)
+.globl	_savegpr0_30
+_savegpr0_30:
+	std	r30,-16(r1)
+.globl	_savegpr0_31
+_savegpr0_31:
+	std	r31,-8(r1)
+	std	r0,16(r1)
+	blr
+
+.globl	_restgpr0_14
+_restgpr0_14:
+	ld	r14,-144(r1)
+.globl	_restgpr0_15
+_restgpr0_15:
+	ld	r15,-136(r1)
+.globl	_restgpr0_16
+_restgpr0_16:
+	ld	r16,-128(r1)
+.globl	_restgpr0_17
+_restgpr0_17:
+	ld	r17,-120(r1)
+.globl	_restgpr0_18
+_restgpr0_18:
+	ld	r18,-112(r1)
+.globl	_restgpr0_19
+_restgpr0_19:
+	ld	r19,-104(r1)
+.globl	_restgpr0_20
+_restgpr0_20:
+	ld	r20,-96(r1)
+.globl	_restgpr0_21
+_restgpr0_21:
+	ld	r21,-88(r1)
+.globl	_restgpr0_22
+_restgpr0_22:
+	ld	r22,-80(r1)
+.globl	_restgpr0_23
+_restgpr0_23:
+	ld	r23,-72(r1)
+.globl	_restgpr0_24
+_restgpr0_24:
+	ld	r24,-64(r1)
+.globl	_restgpr0_25
+_restgpr0_25:
+	ld	r25,-56(r1)
+.globl	_restgpr0_26
+_restgpr0_26:
+	ld	r26,-48(r1)
+.globl	_restgpr0_27
+_restgpr0_27:
+	ld	r27,-40(r1)
+.globl	_restgpr0_28
+_restgpr0_28:
+	ld	r28,-32(r1)
+.globl	_restgpr0_29
+_restgpr0_29:
+	ld	r0,16(r1)
+	ld	r29,-24(r1)
+	mtlr	r0
+	ld	r30,-16(r1)
+	ld	r31,-8(r1)
+	blr
+
+.globl	_restgpr0_30
+_restgpr0_30:
+	ld	r30,-16(r1)
+.globl	_restgpr0_31
+_restgpr0_31:
+	ld	r0,16(r1)
+	ld	r31,-8(r1)
+	mtlr	r0
+	blr
+
+#endif /* CONFIG_PPC64 */
+
 #endif
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index e640175..0d08d01 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -12,6 +12,7 @@
  *  2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -288,8 +289,8 @@
 
 static void test_cpu_macros(void)
 {
-	extern void ftr_fixup_test_FTR_macros;
-	extern void ftr_fixup_test_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FTR_macros;
+	extern u8 ftr_fixup_test_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
 			     &ftr_fixup_test_FTR_macros;
 
@@ -301,8 +302,8 @@
 static void test_fw_macros(void)
 {
 #ifdef CONFIG_PPC64
-	extern void ftr_fixup_test_FW_FTR_macros;
-	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FW_FTR_macros;
+	extern u8 ftr_fixup_test_FW_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
 			     &ftr_fixup_test_FW_FTR_macros;
 
@@ -314,10 +315,10 @@
 
 static void test_lwsync_macros(void)
 {
-	extern void lwsync_fixup_test;
-	extern void end_lwsync_fixup_test;
-	extern void lwsync_fixup_test_expected_LWSYNC;
-	extern void lwsync_fixup_test_expected_SYNC;
+	extern u8 lwsync_fixup_test;
+	extern u8 end_lwsync_fixup_test;
+	extern u8 lwsync_fixup_test_expected_LWSYNC;
+	extern u8 lwsync_fixup_test_expected_SYNC;
 	unsigned long size = &end_lwsync_fixup_test -
 			     &lwsync_fixup_test;
 
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 65abfcf..1dc2fa5 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -135,7 +135,7 @@
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 16 and 4 MiB
 	 * pages. Consequently, restrict the top end of RAM currently
-	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a719f53..3079f6b 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -68,9 +68,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -347,9 +344,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -687,9 +681,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3ecdcec..09dffe6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,7 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -384,8 +384,8 @@
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
-		lmb_reserve(phys_addr, block_size * expected_pages);
+	if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+		memblock_reserve(phys_addr, block_size * expected_pages);
 		add_gpage(phys_addr, block_size, expected_pages);
 	}
 	return 0;
@@ -458,7 +458,7 @@
 	 * and we have at least 1G of RAM at boot
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
-	    lmb_phys_mem_size() >= 0x40000000)
+	    memblock_phys_mem_size() >= 0x40000000)
 		mmu_vmemmap_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
 		mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	mem_size = lmb_phys_mem_size();
+	mem_size = memblock_phys_mem_size();
 	rnd_mem_size = 1UL << __ilog2(mem_size);
 	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@
 		else
 			limit = 0;
 
-		table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+		table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
 
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
@@ -647,9 +647,9 @@
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
-						    1, lmb.rmo_size));
+	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+						    1, memblock.rmo_size));
 	memset(linear_map_hash_slots, 0, linear_map_hash_count);
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
@@ -659,16 +659,16 @@
 	 */
 
 	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = (unsigned long)__va(lmb.memory.region[i].base);
-		size = lmb.memory.region[i].size;
+	for (i=0; i < memblock.memory.cnt; i++) {
+		base = (unsigned long)__va(memblock.memory.region[i].base);
+		size = memblock.memory.region[i].size;
 
 		DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
 		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and
+		 * in such a way that it will not cross two memblock regions and
 		 * will fit within a single 16Mb page.
 		 * The DART space is assumed to be a full 16Mb region even if
 		 * we only use 2Mb of that space. We will use more of it later
@@ -871,6 +871,18 @@
 }
 #endif
 
+void hash_failure_debug(unsigned long ea, unsigned long access,
+			unsigned long vsid, unsigned long trap,
+			int ssize, int psize, unsigned long pte)
+{
+	if (!printk_ratelimit())
+		return;
+	pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+		ea, access, current->comm);
+	pr_info("    trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+		trap, vsid, ssize, psize, pte);
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -955,6 +967,17 @@
 		return 1;
 	}
 
+	/* Add _PAGE_PRESENT to the required access perm */
+	access |= _PAGE_PRESENT;
+
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
 #ifdef CONFIG_HUGETLB_PAGE
 	if (hugeshift)
 		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@
 	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
 		pte_val(*(ptep + PTRS_PER_PTE)));
 #endif
-	/* Pre-check access permissions (will be re-checked atomically
-	 * in __hash_page_XX but this pre-check is a fast path
-	 */
-	if (access & ~pte_val(*ptep)) {
-		DBG_LOW(" no access !\n");
-		return 1;
-	}
-
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@
 					    local, ssize, spp);
 	}
 
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+				   pte_val(*ptep));
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
 #else
@@ -1051,8 +1072,7 @@
 	void *pgdir;
 	pte_t *ptep;
 	unsigned long flags;
-	int local = 0;
-	int ssize;
+	int rc, ssize, local = 0;
 
 	BUG_ON(REGION_ID(ea) != USER_REGION_ID);
 
@@ -1098,11 +1118,18 @@
 	/* Hash it in */
 #ifdef CONFIG_PPC_HAS_HASH_64K
 	if (mm->context.user_psize == MMU_PAGE_64K)
-		__hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
-		__hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-			       subpage_protection(pgdir, ea));
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+				    subpage_protection(pgdir, ea));
+
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   mm->context.user_psize, pte_val(*ptep));
 
 	local_irq_restore(flags);
 }
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 1995398..cc5c273 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -21,21 +21,13 @@
 	unsigned long old_pte, new_pte;
 	unsigned long va, rflags, pa, sz;
 	long slot;
-	int err = 1;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
 	va = hpt_va(ea, vsid, ssize);
 
-	/*
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
-	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
+	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
 	 *
 	 * 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@
 
 	do {
 		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/* Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access */
 		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -121,8 +121,16 @@
                         }
 		}
 
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, old_pte);
+			return -1;
+		}
 
 		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
@@ -131,9 +139,5 @@
 	 * No need to use ldarx/stdcx here
 	 */
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
-	err = 0;
-
- out:
-	return err;
+	return 0;
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 7673330..6a6975d 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,7 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
@@ -136,17 +136,17 @@
 	/* parse args from command line */
 	MMU_setup();
 
-	if (lmb.memory.cnt > 1) {
+	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		lmb.memory.cnt = 1;
-		lmb_analyze();
+		memblock.memory.cnt = 1;
+		memblock_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
 #endif
 	}
 
-	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
@@ -161,8 +161,8 @@
 		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(lowmem_end_addr);
-		lmb_analyze();
+		memblock_enforce_memory_limit(lowmem_end_addr);
+		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
@@ -200,7 +200,7 @@
 	if (init_bootmem_done) {
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					__initial_memory_limit_addr));
 	}
 	return p;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index e267f22..71f1415 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -40,7 +40,7 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 #include <linux/slab.h>
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0f594d7..1a84a8d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -32,7 +32,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
@@ -83,13 +83,13 @@
 #else
 	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
-	for (i=0; i < lmb.memory.cnt; i++) {
+	for (i=0; i < memblock.memory.cnt; i++) {
 		unsigned long base;
 
-		base = lmb.memory.region[i].base;
+		base = memblock.memory.region[i].base;
 
 		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
+			(paddr < (base + memblock.memory.region[i].size))) {
 			return 1;
 		}
 	}
@@ -142,14 +142,14 @@
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
  * memory range.  PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures.  Walk through the
+ * Instead it maintains it in memblock.memory structures.  Walk through the
  * memory regions, find holes and callback for contiguous regions.
  */
 int
 walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
-	struct lmb_property res;
+	struct memblock_property res;
 	unsigned long pfn, len;
 	u64 end;
 	int ret = -1;
@@ -158,7 +158,7 @@
 	res.size = (u64) nr_pages << PAGE_SHIFT;
 
 	end = res.base + res.size - 1;
-	while ((res.base < end) && (lmb_find(&res) >= 0)) {
+	while ((res.base < end) && (memblock_find(&res) >= 0)) {
 		pfn = (unsigned long)(res.base >> PAGE_SHIFT);
 		len = (unsigned long)(res.size >> PAGE_SHIFT);
 		ret = (*func)(pfn, len, arg);
@@ -184,8 +184,8 @@
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
 	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -198,16 +198,16 @@
 	 */
 	bootmap_pages = bootmem_bootmap_pages(total_pages);
 
-	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
 	boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
 
 	/* Add active regions with valid PFNs */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -218,17 +218,17 @@
 	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long addr = lmb.reserved.region[i].base +
-				     lmb_size_bytes(&lmb.reserved, i) - 1;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long addr = memblock.reserved.region[i].base +
+				     memblock_size_bytes(&memblock.reserved, i) - 1;
 		if (addr < lowmem_end_addr)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+		else if (memblock.reserved.region[i].base < lowmem_end_addr) {
 			unsigned long adjusted_size = lowmem_end_addr -
-				      lmb.reserved.region[i].base;
-			reserve_bootmem(lmb.reserved.region[i].base,
+				      memblock.reserved.region[i].base;
+			reserve_bootmem(memblock.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
 		}
 	}
@@ -236,9 +236,9 @@
 	free_bootmem_with_active_regions(0, max_pfn);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
+	for (i = 0; i < memblock.reserved.cnt; i++)
+		reserve_bootmem(memblock.reserved.region[i].base,
+				memblock_size_bytes(&memblock.reserved, i),
 				BOOTMEM_DEFAULT);
 
 #endif
@@ -251,20 +251,20 @@
 /* mark pages that don't exist as nosave */
 static int __init mark_nonram_nosave(void)
 {
-	unsigned long lmb_next_region_start_pfn,
-		      lmb_region_max_pfn;
+	unsigned long memblock_next_region_start_pfn,
+		      memblock_region_max_pfn;
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt - 1; i++) {
-		lmb_region_max_pfn =
-			(lmb.memory.region[i].base >> PAGE_SHIFT) +
-			(lmb.memory.region[i].size >> PAGE_SHIFT);
-		lmb_next_region_start_pfn =
-			lmb.memory.region[i+1].base >> PAGE_SHIFT;
+	for (i = 0; i < memblock.memory.cnt - 1; i++) {
+		memblock_region_max_pfn =
+			(memblock.memory.region[i].base >> PAGE_SHIFT) +
+			(memblock.memory.region[i].size >> PAGE_SHIFT);
+		memblock_next_region_start_pfn =
+			memblock.memory.region[i+1].base >> PAGE_SHIFT;
 
-		if (lmb_region_max_pfn < lmb_next_region_start_pfn)
-			register_nosave_region(lmb_region_max_pfn,
-					       lmb_next_region_start_pfn);
+		if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+			register_nosave_region(memblock_region_max_pfn,
+					       memblock_next_region_start_pfn);
 	}
 
 	return 0;
@@ -275,8 +275,8 @@
  */
 void __init paging_init(void)
 {
-	unsigned long total_ram = lmb_phys_mem_size();
-	phys_addr_t top_of_ram = lmb_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
+	phys_addr_t top_of_ram = memblock_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -327,7 +327,7 @@
 		swiotlb_init(1);
 #endif
 
-	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+	num_physpages = memblock.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -364,7 +364,7 @@
 		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
-			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+			if (memblock_is_reserved(pfn << PAGE_SHIFT))
 				continue;
 			ClearPageReserved(page);
 			init_page_count(page);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 80d11063..aa731af 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,7 +17,7 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/pfn.h>
 #include <asm/sparsemem.h>
@@ -351,7 +351,7 @@
 #define DRCONF_MEM_RESERVED	0x00000080
 
 /*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
 static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -372,8 +372,8 @@
 /*
  * Retreive and validate the ibm,dynamic-memory property of the device tree.
  *
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries.  Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as layed out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -540,19 +540,19 @@
 						      unsigned long size)
 {
 	/*
-	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
+	 * We use memblock_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.  Also, in the case of
 	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (start + size <= lmb_end_of_DRAM())
+	if (start + size <= memblock_end_of_DRAM())
 		return size;
 
-	if (start >= lmb_end_of_DRAM())
+	if (start >= memblock_end_of_DRAM())
 		return 0;
 
-	return lmb_end_of_DRAM() - start;
+	return memblock_end_of_DRAM() - start;
 }
 
 /*
@@ -731,7 +731,7 @@
 	}
 
 	/*
-	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
 	 * property in the ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -743,8 +743,8 @@
 
 static void __init setup_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned long start_pfn, end_pfn;
 	unsigned int i, nid = 0;
 
@@ -753,9 +753,9 @@
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	for (i = 0; i < lmb.memory.cnt; ++i) {
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; ++i) {
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 
 		fake_numa_create_new_node(end_pfn, &nid);
 		add_active_range(nid, start_pfn, end_pfn);
@@ -813,7 +813,7 @@
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM();
+		for (i = 0; i < memblock_end_of_DRAM();
 		     i += (1 << SECTION_SIZE_BITS)) {
 			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
@@ -833,7 +833,7 @@
 }
 
 /*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
  * required. nid is the preferred node and end is the physical address of
  * the highest address in the node.
  *
@@ -847,11 +847,11 @@
 	int new_nid;
 	unsigned long ret_paddr;
 
-	ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret_paddr)
-		ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
 
 	if (!ret_paddr)
 		panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -861,14 +861,14 @@
 
 	/*
 	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the LMB allocator to the
+	 * and hand over control from the MEMBLOCK allocator to the
 	 * bootmem allocator.  If this function is called for
 	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the LMB allocator.
+	 * bootmem allocator instead of the MEMBLOCK allocator.
 	 *
 	 * So, check the nid from which this allocation came
 	 * and double check to see if we need to use bootmem
-	 * instead of the LMB.  We don't free the LMB memory
+	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
 	 * since it would be useless.
 	 */
 	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -893,9 +893,9 @@
 	struct pglist_data *node = NODE_DATA(nid);
 	int i;
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long physbase = memblock.reserved.region[i].base;
+		unsigned long size = memblock.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
 		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
@@ -903,7 +903,7 @@
 					     node->node_spanned_pages;
 
 		/*
-		 * Check to make sure that this lmb.reserved area is
+		 * Check to make sure that this memblock.reserved area is
 		 * within the bounds of the node that we care about.
 		 * Checking the nid of the start and end points is not
 		 * sufficient because the reserved area could span the
@@ -961,7 +961,7 @@
 	int nid;
 
 	min_low_pfn = 0;
-	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
 	if (parse_numa_properties())
@@ -1038,7 +1038,7 @@
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -1113,7 +1113,7 @@
 /*
  * Find the node associated with a hot added memory section for memory
  * represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
@@ -1154,8 +1154,8 @@
 
 /*
  * Find the node associated with a hot added memory section.  Section
- * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
  */
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 9fc02dc..a87ead0 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -26,7 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgtable.h>
@@ -115,11 +115,7 @@
 {
 	struct page *ptepage;
 
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
 	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
 
 	ptepage = alloc_pages(flags, 0);
 	if (!ptepage)
@@ -202,7 +198,7 @@
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
-	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+	    !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -335,7 +331,7 @@
 		s = mmu_mapin_ram(top);
 		__mapin_ram_chunk(s, top);
 
-		top = lmb_end_of_DRAM();
+		top = memblock_end_of_DRAM();
 		s = wii_mmu_mapin_mem2(top);
 		__mapin_ram_chunk(s, top);
 	}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index d050fc8..21d6dfa 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -34,7 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgalloc.h>
@@ -67,7 +67,7 @@
 	if (init_bootmem_done)
 		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
 	else
-		pt = __va(lmb_alloc_base(size, size,
+		pt = __va(memblock_alloc_base(size, size,
 					 __pa(MAX_DMA_ADDRESS)));
 	memset(pt, 0, size);
 
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f11c2cd..f8a0182 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
@@ -223,7 +223,7 @@
 	 * Find some memory for the hash table.
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+	Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
 				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 687fdda..446a018 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,7 +12,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -252,7 +252,7 @@
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+		newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
 					 1<<SID_SHIFT);
 		newstab = (unsigned long)__va(newstab);
 
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index e81d5d6..d8695b0 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -34,7 +34,7 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -426,7 +426,7 @@
 	/* Set the global containing the top of the linear mapping
 	 * for use by the TLB miss code
 	 */
-	linear_map_top = lmb_end_of_DRAM();
+	linear_map_top = memblock_end_of_DRAM();
 
 	/* A sync won't hurt us after mucking around with
 	 * the MMU configuration
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2c9e522..7fd90d0 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1077,7 +1077,7 @@
 		index = ENTRIES-1;
 
 	/* make sure index is valid */
-	if ((index > ENTRIES) || (index < 0))
+	if ((index >= ENTRIES) || (index < 0))
 		index = ENTRIES-1;
 
 	return initial_lfsr[index];
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index a55b0b6..76722532 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -64,10 +64,19 @@
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	struct resource res;
 
 	/* map the whole register space */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+		of_node_put(np);
+		return -ENOSYS;
+	}
+
+	mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
 	of_node_put(np);
 	if (!mbar) {
 		pr_err("mpc52xx_pm_prepare(): could not map registers\n");
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 534c2ec..2ab338c 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -16,7 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -100,7 +100,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 004b7d3..f79f2f1 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,7 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -94,7 +94,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 544011a..8190bc2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -190,7 +190,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 8fe87fc..4945136 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -33,7 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -325,7 +325,7 @@
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 2aa69a6..b11c353 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -103,7 +103,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 4326b73..3712900 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -29,7 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -845,10 +845,10 @@
 	/* If we found a DMA window, we check if it's big enough to enclose
 	 * all of physical memory. If not, we force enable IOMMU
 	 */
-	if (np && size < lmb_end_of_DRAM()) {
+	if (np && size < memblock_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
 		       " (%ldMB) smaller than total memory (%lldMB)\n",
-		       size >> 20, lmb_end_of_DRAM() >> 20);
+		       size >> 20, memblock_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
 
@@ -1064,7 +1064,7 @@
 	}
 
 	fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
-	fsize = lmb_phys_mem_size();
+	fsize = memblock_phys_mem_size();
 
 	if ((fbase + fsize) <= 0x800000000ul)
 		hbase = 0; /* use the device tree window */
@@ -1169,7 +1169,7 @@
 	 * Note: should we make sure we have the IOMMU actually disabled ?
 	 */
 	if (iommu_is_off ||
-	    (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+	    (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;
 
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 174a04a..5cdcc7c 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/kexec.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <mm/mmu_decl.h>
 
 #include <asm/io.h>
@@ -65,7 +65,7 @@
 
 void __init wii_memory_fixups(void)
 {
-	struct lmb_property *p = lmb.memory.region;
+	struct memblock_property *p = memblock.memory.region;
 
 	/*
 	 * This is part of a workaround to allow the use of two
@@ -77,7 +77,7 @@
 	 * between both ranges.
 	 */
 
-	BUG_ON(lmb.memory.cnt != 2);
+	BUG_ON(memblock.memory.cnt != 2);
 	BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
 
 	p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
@@ -92,11 +92,11 @@
 
 	p[0].size += wii_hole_size + p[1].size;
 
-	lmb.memory.cnt = 1;
-	lmb_analyze();
+	memblock.memory.cnt = 1;
+	memblock_analyze();
 
 	/* reserve the hole */
-	lmb_reserve(wii_hole_start, wii_hole_size);
+	memblock_reserve(wii_hole_start, wii_hole_size);
 
 	/* allow ioremapping the address space in the hole */
 	__allow_ioremap_reserved = 1;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 3fc2e64..ab3962b 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -445,7 +445,11 @@
 	}
 
 	allocate_device_bars(pdev);
-	iseries_device_information(pdev, bus, *sub_bus);
+	if (likely(sub_bus))
+		iseries_device_information(pdev, bus, *sub_bus);
+	else
+		printk(KERN_ERR "PCI: Device node %s has missing or invalid "
+				"linux,subbus property\n", node->full_name);
 }
 
 /*
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 39df705..3fff8d9 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -41,7 +41,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 7b1d608..1f9fb2c 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -204,7 +204,7 @@
 	pr_debug(" -> %s\n", __func__);
 
 	/* Allocate a spare page to map all invalid IOTLB pages. */
-	tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
+	tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
 	if (!tmp)
 		panic("IOBMAP: Cannot allocate spare page!");
 	/* Empty l1 is marked invalid */
@@ -275,7 +275,7 @@
 	return;
 #endif
 	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+	iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
 
 	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
 }
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index f1d0132..9deb274 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -51,7 +51,7 @@
 #include <linux/suspend.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -619,7 +619,7 @@
 	 * driver needs that. We have to allocate it now. We allocate 4k
 	 * (1 small page) for now.
 	 */
-	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+	smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL);
 #endif /* CONFIG_PMAC_SMU */
 
 	return 1;
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1e8a1e3..2c0ed87 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 7925751e..c204588 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/cell-regs.h>
@@ -318,8 +318,8 @@
 		return result;
 	}
 
-	lmb_add(start_addr, map.r1.size);
-	lmb_analyze();
+	memblock_add(start_addr, map.r1.size);
+	memblock_analyze();
 
 	result = online_pages(start_pfn, nr_pages);
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index dd521a1..5b759b6 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,7 +24,7 @@
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 
@@ -723,7 +723,7 @@
  * flash to a high address in the boot memory region and then puts that RAM
  * address and the byte count into the repository for retrieval by the guest.
  * We copy the data we want into a static variable and allow the memory setup
- * by the HV to be claimed by the lmb manager.
+ * by the HV to be claimed by the memblock manager.
  *
  * The os area mirror will not be available to a second stage kernel, and
  * the header verify will fail.  In this case, the saved_params values will
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 01e7b5b..bc88036 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -10,14 +10,14 @@
  */
 
 #include <linux/of.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <asm/firmware.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/sparsemem.h>
 
-static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
+static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
 {
 	unsigned long start, start_pfn;
 	struct zone *zone;
@@ -26,7 +26,7 @@
 	start_pfn = base >> PAGE_SHIFT;
 
 	if (!pfn_valid(start_pfn)) {
-		lmb_remove(base, lmb_size);
+		memblock_remove(base, memblock_size);
 		return 0;
 	}
 
@@ -41,20 +41,20 @@
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(base, lmb_size);
+	memblock_remove(base, memblock_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
 	start = (unsigned long)__va(base);
-	ret = remove_section_mapping(start, start + lmb_size);
+	ret = remove_section_mapping(start, start + memblock_size);
 
 	/* Ensure all vmalloc mappings are flushed in case they also
 	 * hit that section of memory
@@ -80,7 +80,7 @@
 		return 0;
 
 	/*
-	 * Find the bae address and size of the lmb
+	 * Find the bae address and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -89,7 +89,7 @@
 	base = *(unsigned long *)regs;
 	lmb_size = regs[3];
 
-	ret = pseries_remove_lmb(base, lmb_size);
+	ret = pseries_remove_memblock(base, lmb_size);
 	return ret;
 }
 
@@ -109,7 +109,7 @@
 		return 0;
 
 	/*
-	 * Find the base and size of the lmb
+	 * Find the base and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -121,7 +121,7 @@
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	ret = lmb_add(base, lmb_size);
+	ret = memblock_add(base, lmb_size);
 	return (ret < 0) ? -EINVAL : 0;
 }
 
@@ -142,10 +142,10 @@
 	}
 
 	if (action == PSERIES_DRCONF_MEM_ADD) {
-		rc = lmb_add(*base, *lmb_size);
+		rc = memblock_add(*base, *lmb_size);
 		rc = (rc < 0) ? -EINVAL : 0;
 	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
-		rc = pseries_remove_lmb(*base, *lmb_size);
+		rc = pseries_remove_memblock(*base, *lmb_size);
 	} else {
 		rc = -EINVAL;
 	}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index d26182d..395848e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -66,7 +66,7 @@
 	tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
+		/* can't move this out since we might cross MEMBLOCK boundary */
 		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 7ebd9e8..6e7742d 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -255,12 +255,12 @@
 
 /* ------------------------------------------------- */
 /**
- * release_memory_range -- release memory previously lmb_reserved
+ * release_memory_range -- release memory previously memblock_reserved
  * @start_pfn: starting physical frame number
  * @nr_pages: number of pages to free.
  *
  * This routine will release memory that had been previously
- * lmb_reserved in early boot. The released memory becomes
+ * memblock_reserved in early boot. The released memory becomes
  * available for genreal use.
  */
 static void release_memory_range(unsigned long start_pfn,
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index c8b96ed..559db2b 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -36,7 +36,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -232,7 +232,7 @@
 	 * that to work around what looks like a problem with the HT bridge
 	 * prefetching into invalid pages and corrupting data
 	 */
-	tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+	tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 	dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
 					 DARTMAP_RPNMASK);
 
@@ -407,7 +407,7 @@
 	if (iommu_is_off)
 		return;
 
-	if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
+	if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
 		return;
 
 	/* 512 pages (2MB) is max DART tablesize. */
@@ -416,7 +416,7 @@
 	 * will blow up an entire large page anyway in the kernel mapping
 	 */
 	dart_tablebase = (unsigned long)
-		abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+		abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
 
 	printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
 }
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a14760f..356c6a0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
 
@@ -190,7 +190,7 @@
 	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
 
 	/* Setup inbound mem window */
-	mem = lmb_end_of_DRAM();
+	mem = memblock_end_of_DRAM();
 	sz = min(mem, paddr_lo);
 	mem_log = __ilog2_u64(sz);
 
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d6028..c0bb76e 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
  * also relocates SMC2, but this would require additional changes
  * to uart.c, so I am holding off on that for a moment.
  */
+#include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -16,6 +17,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
+#include <asm/cpm.h>
 #include <asm/cpm1.h>
 
 /*
@@ -24,7 +26,7 @@
 
 #ifdef CONFIG_I2C_SPI_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7FFFEFD9,
 	0x3FFD0000,
 	0x7FFB49F7,
@@ -143,7 +145,7 @@
 	0x5F8247F8
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3E303430,
 	0x34343737,
 	0xABF7BF9B,
@@ -182,7 +184,7 @@
 
 #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x3fff0000,
 	0x3ffd0000,
 	0x3ffb0000,
@@ -505,7 +507,7 @@
 	0x6079e2bb
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x30303030,
 	0x3e3e3434,
 	0xabbf9b99,
@@ -572,7 +574,7 @@
 	0xf22f3f23
 };
 
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
 	0x27eeeeee,
 	0xeeeeeeee,
 	0xeeeeeeee,
@@ -598,7 +600,7 @@
 
 #ifdef CONFIG_USB_SOF_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7fff0000,
 	0x7ffd0000,
 	0x7ffb0000,
@@ -613,21 +615,25 @@
 	0x60750000
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3030304c,
 	0xcab9e441,
 	0xa1aaf220
 };
 #endif
 
-void
-cpm_load_patch(cpm8xx_t	*cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
 {
 	volatile uint		*dp;		/* Dual-ported RAM. */
 	volatile cpm8xx_t	*commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	volatile iic_t		*iip;
-	volatile spi_t		*spp;
+	volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 	volatile smc_uart_t	*smp;
+#endif
+#endif
 	int	i;
 
 	commproc = cp;
@@ -668,8 +674,8 @@
 	/* Put SPI above the IIC, also 32-byte aligned.
 	*/
 	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
+	spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+	spp->rpbase = i;
 
 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
 	commproc->cp_cpmcr1 = 0x802a;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 2102487..20b73c0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1666,7 +1666,7 @@
 			       mpic->save_data[i].dest);
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
-	{
+	if (mpic->fixups) {
 		struct mpic_irq_fixup *fixup = &mpic->fixups[i];
 
 		if (fixup->base) {
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 55c80ffd..92f1cb7 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -181,7 +181,7 @@
 		goto out;
 	}
 
-	appldata_os_data = kzalloc(max_size, GFP_DMA);
+	appldata_os_data = kzalloc(max_size, GFP_KERNEL | GFP_DMA);
 	if (appldata_os_data == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index bcd6884..253f158 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Fri Apr  9 09:57:10 2010
+# Linux kernel version: 2.6.35-rc1
+# Fri Jun  4 11:32:40 2010
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -35,11 +35,13 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
@@ -77,6 +79,7 @@
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_BLK_CGROUP is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -157,7 +160,6 @@
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -166,7 +168,6 @@
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
@@ -247,7 +248,6 @@
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 CONFIG_HOTPLUG_CPU=y
-# CONFIG_SCHED_BOOK is not set
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_AUDIT_ARCH=y
@@ -320,7 +320,6 @@
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PROCESS_DEBUG is not set
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
@@ -457,6 +456,7 @@
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
@@ -465,6 +465,7 @@
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -525,6 +526,7 @@
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
@@ -546,6 +548,7 @@
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 # CONFIG_PCMCIA is not set
 CONFIG_CCW=y
 
@@ -728,6 +731,7 @@
 # Character devices
 #
 CONFIG_DEVKMEM=y
+# CONFIG_N_GSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -775,6 +779,7 @@
 # CONFIG_MONREADER is not set
 CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
+# CONFIG_RAMOOPS is not set
 
 #
 # PPS support
@@ -788,10 +793,6 @@
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
 # CONFIG_AUXDISPLAY is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -976,6 +977,7 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 # CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1010,6 +1012,7 @@
 CONFIG_KPROBE_EVENT=y
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_TRACEPOINTS is not set
 # CONFIG_SAMPLE_TRACE_EVENTS is not set
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index d5e3e60..bea9ee3 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -535,8 +535,16 @@
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	la	%r8,0x7f
 	nr	%r8,%r3 		# clear per-event-bit and ilc
-	be	BASED(pgm_exit)		# only per or per+check ?
-	b	BASED(pgm_do_call)
+	be	BASED(pgm_exit2)	# only per or per+check ?
+	l	%r7,BASED(.Ljump_table)
+	sll	%r8,2
+	l	%r7,0(%r8,%r7)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r7		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	b	BASED(sysc_return)
 
 #
 # it was a single stepped SVC that is causing all the trouble
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index e7192e1..8bccec1 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -544,8 +544,16 @@
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lghi	%r8,0x7f
 	ngr	%r8,%r3			# clear per-event-bit and ilc
-	je	pgm_exit
-	j	pgm_do_call
+	je	pgm_exit2
+	sll	%r8,3
+	larl	%r1,pgm_check_table
+	lg	%r1,0(%r8,%r1)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r1		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	j	sysc_return
 
 #
 # it was a single stepped SVC that is causing all the trouble
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 639380a..22cfd63 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,8 +55,10 @@
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
-	vfree(mod->arch.syminfo);
-	mod->arch.syminfo = NULL;
+	if (mod) {
+		vfree(mod->arch.syminfo);
+		mod->arch.syminfo = NULL;
+	}
 	vfree(module_region);
 }
 
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a2163c9..15a7536 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -524,8 +524,11 @@
 	if (!etr_eacr.sl)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events)) {
+		etr_eacr.es = etr_eacr.sl = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -539,8 +542,11 @@
 	if (!etr_eacr.es)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SYNC_CHECK, &etr_events)) {
+		etr_eacr.es = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -902,7 +908,7 @@
 	 * Do not try to get the alternate port aib if the clock
 	 * is not in sync yet.
 	 */
-	if (!check_sync_clock())
+	if (!eacr.es || !check_sync_clock())
 		return eacr;
 
 	/*
@@ -1064,7 +1070,7 @@
 	 * If the clock is in sync just update the eacr and return.
 	 * If there is no valid sync port wait for a port update.
 	 */
-	if (check_sync_clock() || sync_port < 0) {
+	if ((eacr.es && check_sync_clock()) || sync_port < 0) {
 		etr_update_eacr(eacr);
 		etr_set_tolec_timeout(now);
 		goto out_unlock;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 8093e6f..ae37058 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -761,7 +761,7 @@
 	 * to hold the maximum amount of facilites. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
-	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if (!facilities) {
 		kvm_exit();
 		return -ENOMEM;
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index eff3c59..702276f 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -113,7 +113,7 @@
 {
 	struct kvm_s390_interrupt_info *inti;
 
-	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+	inti = kzalloc(sizeof(*inti), GFP_ATOMIC);
 	if (!inti)
 		return -ENOMEM;
 	inti->type = KVM_S390_SIGP_STOP;
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 6409fd5..3cc95dd 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -105,7 +105,7 @@
 dcss_set_subcodes(void)
 {
 #ifdef CONFIG_64BIT
-	char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+	char *name = kmalloc(8 * sizeof(char), GFP_KERNEL | GFP_DMA);
 	unsigned long rx, ry;
 	int rc;
 
@@ -252,12 +252,13 @@
 static int
 query_segment_type (struct dcss_segment *seg)
 {
-	struct qin64  *qin = kmalloc (sizeof(struct qin64), GFP_DMA);
-	struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);
-
-	int diag_cc, rc, i;
 	unsigned long dummy, vmrc;
+	int diag_cc, rc, i;
+	struct qout64 *qout;
+	struct qin64 *qin;
 
+	qin = kmalloc(sizeof(*qin), GFP_KERNEL | GFP_DMA);
+	qout = kmalloc(sizeof(*qout), GFP_KERNEL | GFP_DMA);
 	if ((qin == NULL) || (qout == NULL)) {
 		rc = -ENOMEM;
 		goto out_free;
@@ -286,7 +287,7 @@
 	   copy data for the new format. */
 	if (segext_scode == DCSS_SEGEXT) {
 		struct qout64_old *qout_old;
-		qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+		qout_old = kzalloc(sizeof(*qout_old), GFP_KERNEL | GFP_DMA);
 		if (qout_old == NULL) {
 			rc = -ENOMEM;
 			goto out_free;
@@ -407,11 +408,11 @@
 static int
 __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
 {
-	struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
-			GFP_DMA);
-	int rc, diag_cc;
 	unsigned long start_addr, end_addr, dummy;
+	struct dcss_segment *seg;
+	int rc, diag_cc;
 
+	seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
 	if (seg == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c5ee4ce..82868fe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,8 +9,8 @@
 	def_bool y
 	select EMBEDDED
 	select HAVE_CLK
-	select HAVE_IDE
-	select HAVE_LMB
+	select HAVE_IDE if HAS_IOPORT
+	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_ARCH_TRACEHOOK
@@ -174,6 +174,9 @@
 config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
+config NO_IOPORT
+	bool
+
 config IO_TRAPPED
 	bool
 
@@ -776,6 +779,17 @@
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"
 
+config ROMIMAGE_MMCIF
+	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+	depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+	help
+	  Say Y here to include experimental MMCIF loading code in
+	  romImage. With this enabled it is possible to write the romImage
+	  kernel image to an MMC card and boot the kernel straight from
+	  the reset vector. At reset the processor Mask ROM will load the
+	  first part of the romImage which in turn loads the rest the kernel
+	  image to RAM using the MMCIF hardware block.
+
 choice
 	prompt "Kernel command line"
 	optional
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 938e87d..07b35ca 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -154,6 +154,7 @@
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 	help
 	  Select SDK7786 if configuring for a Renesas Technology Europe
 	  SH7786-65nm board.
@@ -190,6 +191,7 @@
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
@@ -286,6 +288,7 @@
 config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT if !PCI
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 57e37e2..3a170bd 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -328,7 +328,7 @@
 	.set_capture = camera_set_capture,
 };
 
-struct soc_camera_link camera_link = {
+static struct soc_camera_link camera_link = {
 	.bus_id		= 0,
 	.add_device	= ap325rxa_camera_add,
 	.del_device	= ap325rxa_camera_del,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 4971425..1d7b495 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -12,6 +12,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
@@ -23,10 +25,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_msiof.h>
 #include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
@@ -139,7 +139,7 @@
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 	.ether_link_active_low = 1
@@ -159,7 +159,7 @@
 };
 
 /* USB0 host */
-void usb0_port_power(int port, int power)
+static void usb0_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB4, power);
 }
@@ -195,7 +195,7 @@
 };
 
 /* USB1 host/function */
-void usb1_port_power(int port, int power)
+static void usb1_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB5, power);
 }
@@ -421,7 +421,7 @@
 	return 0;
 }
 
-struct tsc2007_platform_data tsc2007_info = {
+static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
 	.get_pendown_state	= ts_get_pendown_state,
@@ -436,7 +436,7 @@
 };
 
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
-/* SHDI0 */
+/* SDHI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB6, state);
@@ -474,7 +474,8 @@
 	},
 };
 
-/* SHDI1 */
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB7, state);
@@ -511,6 +512,7 @@
 		.hwblk_id = HWBLK_SDHI1,
 	},
 };
+#endif /* CONFIG_MMC_SH_MMCIF */
 
 #else
 
@@ -720,7 +722,7 @@
 	.rate		= 0, /* unknown */
 };
 
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.portb_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -777,7 +779,7 @@
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -786,7 +788,7 @@
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
@@ -819,6 +821,58 @@
 	},
 };
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+/* SH_MMCIF */
+static void mmcif_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static void mmcif_down_pwr(struct platform_device *pdev)
+{
+	gpio_set_value(GPIO_PTB7, 0);
+}
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.set_pwr	= mmcif_set_pwr,
+	.down_pwr	= mmcif_down_pwr,
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -831,7 +885,9 @@
 	&keysc_device,
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
 	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	&sdhi1_device,
+#endif
 #else
 	&msiof0_device,
 #endif
@@ -841,6 +897,9 @@
 	&fsi_device,
 	&irda_device,
 	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF)
+	&sh_mmcif_device,
+#endif
 };
 
 #ifdef CONFIG_I2C
@@ -1134,6 +1193,7 @@
 	gpio_request(GPIO_PTB6, NULL);
 	gpio_direction_output(GPIO_PTB6, 0);
 
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
 	gpio_request(GPIO_FN_SDHI1CD,  NULL);
 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
@@ -1148,6 +1208,7 @@
 
 	/* I/O buffer drive ability is high for SDHI1 */
 	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif /* CONFIG_MMC_SH_MMCIF */
 #else
 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1223,6 +1284,25 @@
 	gpio_request(GPIO_PTU5, NULL);
 	gpio_direction_output(GPIO_PTU5, 0);
 
+#if defined(CONFIG_MMC_SH_MMCIF)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* I/O buffer drive ability is high for MMCIF */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 87185de..662debe 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -181,7 +181,7 @@
 	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
 }
 
-struct platform_nand_data migor_nand_flash_data = {
+static struct platform_nand_data migor_nand_flash_data = {
 	.chip = {
 		.nr_chips = 1,
 		.partitions = migor_nand_flash_partitions,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index f9b8254..552ebd9 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,7 +283,7 @@
 };
 
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -371,7 +371,7 @@
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8187 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 };
@@ -535,7 +535,7 @@
 #include <media/ak881x.h>
 #include <media/sh_vou.h>
 
-struct ak881x_pdata ak881x_pdata = {
+static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
 };
 
@@ -545,7 +545,7 @@
 	.platform_data = &ak881x_pdata,
 };
 
-struct sh_vou_pdata sh_vou_pdata = {
+static struct sh_vou_pdata sh_vou_pdata = {
 	.bus_fmt	= SH_VOU_BUS_8BIT,
 	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
 	.board_info	= &ak8813,
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index f473a24..2216ee5 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -1,16 +1,21 @@
 #
 # linux/arch/sh/boot/romimage/Makefile
 #
-# create an image suitable for burning to flash from zImage
+# create an romImage file suitable for burning to flash/mmc from zImage
 #
 
 targets		:= vmlinux head.o zeropage.bin piggy.o
+load-y		:= 0
 
-OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724)	:= 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724)	:= $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
 		   -T $(obj)/../../kernel/vmlinux.lds
 
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 93e779a..4671d1b 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -12,8 +12,40 @@
 	/* include board specific setup code */
 #include <mach/romimage.h>
 
+#ifdef CONFIG_ROMIMAGE_MMCIF
+	/* load the romImage to above the empty zero page */
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	bytes_to_load, r5
+	mov.l	loader_function, r7
+	jsr	@r7
+	 mov	r4, r15
+
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	loaded_code_offs, r5
+	add	r5, r4
+	jmp	@r4
+	 nop
+
+	.balign 4
+empty_zero_page_dst_adj:
+	.long	PAGE_SIZE
+bytes_to_load:
+	.long	end_data - romstart
+loader_function:
+	.long	mmcif_loader
+loaded_code_offs:
+	.long	loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
 	/* copy the empty_zero_page contents to where vmlinux expects it */
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
 	mov.l	empty_zero_page_dst, r1
 	mov	#(PAGE_SHIFT - 4), r4
 	mov	#1, r3
@@ -37,7 +69,9 @@
 	mov	#PAGE_SHIFT, r4
 	mov	#1, r1
 	shld	r4, r1
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	add	r1, r0
+	mov.l	extra_data_size, r1
 	add	r1, r0
 	jmp	@r0
 	 nop
@@ -45,4 +79,6 @@
 	.align 2
 empty_zero_page_dst:
 	.long	_text
-empty_zero_page_src:
+extra_data_pos:
+extra_data_size:
+	.long	zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 0000000..14863d7
--- /dev/null
+++ b/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,72 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE      (void __iomem *)0xa4ca0000
+
+#define MSTPCR2		0xa4150038
+#define PTWCR		0xa4050146
+#define PTXCR		0xa4050148
+#define PSELA		0xa405014e
+#define PSELE		0xa4050156
+#define HIZCRC		0xa405015c
+#define DRVCRA		0xa405018a
+
+enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
+       MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* enable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+	/* setup pins D7-D0 */
+	__raw_writew(0x0000, PTWCR);
+
+	/* setup pins MMC_CLK, MMC_CMD */
+	__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+	/* select D3-D0 pin function */
+	__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+	/* select D7-D4 pin function */
+	__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+	/* disable Hi-Z for the MMC pins */
+	__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+	/* high drive capability for MMC pins */
+	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
+
+	/* disable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index 287c08f..590394e 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -1,6 +1,8 @@
 SECTIONS
 {
   .text : {
+	zero_page_pos = .;
 	*(.data)
+	end_data = .;
 	}
 }
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 953af13..1e9598d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -139,8 +139,6 @@
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		if (!dev->resource[i].start)
 			continue;
-		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
-			continue;
 		if (dev->resource[i].flags & IORESOURCE_IO)
 			offset = hose->io_offset;
 		else if (dev->resource[i].flags & IORESOURCE_MEM)
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f689554..b237d52 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -39,6 +39,8 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
+#ifdef CONFIG_HAS_IOPORT
+
 #define inb(p)			sh_mv.mv_inb((p))
 #define inw(p)			sh_mv.mv_inw((p))
 #define inl(p)			sh_mv.mv_inl((p))
@@ -60,6 +62,8 @@
 #define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
 #define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
 
+#endif
+
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -240,6 +244,8 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_HAS_IOPORT
+
 /*
  * This function provides a method for the generic case where a
  * board-specific ioport_map simply needs to return the port + some
@@ -255,6 +261,8 @@
 
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
+#endif
+
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
 void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
deleted file mode 100644
index 9b437f6..0000000
--- a/arch/sh/include/asm/lmb.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_LMB_H
-#define __ASM_SH_LMB_H
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index bc0218c..a0b0cf7 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,6 +19,10 @@
 	const char *mv_name;
 	int mv_nr_irqs;
 
+	int (*mv_irq_demux)(int irq);
+	void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT
 	u8 (*mv_inb)(unsigned long);
 	u16 (*mv_inw)(unsigned long);
 	u32 (*mv_inl)(unsigned long);
@@ -40,12 +44,9 @@
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	int (*mv_irq_demux)(int irq);
-
-	void (*mv_init_irq)(void);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
+#endif
 
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
new file mode 100644
index 0000000..dfe683b
--- /dev/null
+++ b/arch/sh/include/asm/memblock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_MEMBLOCK_H
+#define __ASM_SH_MEMBLOCK_H
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index fbbf550..4c27b68 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
  * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
  * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
  * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
  */
 
 /* Pin Function Controller:
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e241..08fb422 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
 /* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787e..1dcf5e6 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* EcoVec board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
 	.align 2
 1 :	.long 0xa8000000
 2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823..976256a 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* kfr2r09 board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
 	.align 2
 1:	.long 0xa8000000
 2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 650b92f..e25f3c6 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -12,7 +12,7 @@
 CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
-	   idle.o io.o io_generic.o irq.o				\
+	   idle.o io.o irq.o						\
 	   irq_$(BITS).o machvec.o nmi_debug.o process.o		\
 	   process_$(BITS).o ptrace_$(BITS).o				\
 	   reboot.o return_address.o					\
@@ -39,6 +39,7 @@
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 886d7d8..49c09c7 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -49,6 +49,8 @@
 
 static struct dwarf_cie *cached_cie;
 
+static unsigned int dwarf_unwinder_ready;
+
 /**
  *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
  *	@frame: the DWARF frame whose list of registers we insert on
@@ -582,6 +584,13 @@
 	unsigned long addr;
 
 	/*
+	 * If we've been called in to before initialization has
+	 * completed, bail out immediately.
+	 */
+	if (!dwarf_unwinder_ready)
+		return NULL;
+
+	/*
 	 * If we're starting at the top of the stack we need get the
 	 * contents of a physical register to get the CFA in order to
 	 * begin the virtual unwinding of the stack.
@@ -1167,7 +1176,7 @@
  */
 static int __init dwarf_unwinder_init(void)
 {
-	int err;
+	int err = -ENOMEM;
 
 	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
 			sizeof(struct dwarf_frame), 0,
@@ -1181,11 +1190,15 @@
 					  mempool_alloc_slab,
 					  mempool_free_slab,
 					  dwarf_frame_cachep);
+	if (!dwarf_frame_pool)
+		goto out;
 
 	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
 					 mempool_alloc_slab,
 					 mempool_free_slab,
 					 dwarf_reg_cachep);
+	if (!dwarf_reg_pool)
+		goto out;
 
 	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
 	if (err)
@@ -1195,11 +1208,13 @@
 	if (err)
 		goto out;
 
+	dwarf_unwinder_ready = 1;
+
 	return 0;
 
 out:
 	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
 	dwarf_unwinder_cleanup();
-	return -EINVAL;
+	return err;
 }
 early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4770c24..5c51b79 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -112,25 +112,3 @@
         }
 }
 EXPORT_SYMBOL(memset_io);
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index e1e1dbd..447d78f 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -158,3 +158,23 @@
 void generic_ioport_unmap(void __iomem *addr)
 {
 }
+
+#ifndef CONFIG_GENERIC_IOMAP
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 4a8bb4e..2947d2b 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -91,10 +91,14 @@
 	tiop->magic = IO_TRAPPED_MAGIC;
 	INIT_LIST_HEAD(&tiop->list);
 	spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT
 	if (flags & IORESOURCE_IO)
 		list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
 	if (flags & IORESOURCE_MEM)
 		list_add(&tiop->list, &trapped_mem);
+#endif
 	spin_unlock_irq(&trapped_lock);
 
 	return 0;
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5a559e6..e2a3af3 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -15,7 +15,7 @@
 #include <linux/numa.h>
 #include <linux/ftrace.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -157,10 +157,10 @@
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -172,14 +172,14 @@
 
 	crash_size = PAGE_ALIGN(crashk_res.end - crashk_res.start + 1);
 	if (!crashk_res.start) {
-		unsigned long max = lmb_end_of_DRAM() - memory_limit;
-		crashk_res.start = __lmb_alloc_base(crash_size, PAGE_SIZE, max);
+		unsigned long max = memblock_end_of_DRAM() - memory_limit;
+		crashk_res.start = __memblock_alloc_base(crash_size, PAGE_SIZE, max);
 		if (!crashk_res.start) {
 			pr_err("crashkernel allocation failed\n");
 			goto disable;
 		}
 	} else {
-		ret = lmb_reserve(crashk_res.start, crash_size);
+		ret = memblock_reserve(crashk_res.start, crash_size);
 		if (unlikely(ret < 0)) {
 			pr_err("crashkernel reservation failed - "
 			       "memory is in use\n");
@@ -192,7 +192,7 @@
 	/*
 	 * Crash kernel trumps memory limit
 	 */
-	if ((lmb_end_of_DRAM() - memory_limit) <= crashk_res.end) {
+	if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
 		memory_limit = 0;
 		pr_info("Disabled memory limit for crashkernel\n");
 	}
@@ -201,7 +201,7 @@
 		"for crashkernel (System RAM: %ldMB)\n",
 		(unsigned long)(crash_size >> 20),
 		(unsigned long)(crashk_res.start),
-		(unsigned long)(lmb_phys_mem_size() >> 20));
+		(unsigned long)(memblock_phys_mem_size() >> 20));
 
 	return;
 
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 85cfaf9..9f9bb63 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,6 +118,14 @@
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
+#ifdef CONFIG_HAS_IOPORT
+
+#ifdef P2SEG
+	__set_io_port_base(P2SEG);
+#else
+	__set_io_port_base(0);
+#endif
+
 	mv_set(inb);	mv_set(inw);	mv_set(inl);
 	mv_set(outb);	mv_set(outw);	mv_set(outl);
 
@@ -129,16 +137,13 @@
 
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
+
+#endif
+
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
 }
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
index cbf1dd5..5124aeb 100644
--- a/arch/sh/kernel/return_address.c
+++ b/arch/sh/kernel/return_address.c
@@ -24,6 +24,8 @@
 		struct dwarf_frame *tmp;
 
 		tmp = dwarf_unwind_stack(ra, frame);
+		if (!tmp)
+			return NULL;
 
 		if (frame)
 			dwarf_free_frame(frame);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 2727346..e769401 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -141,10 +141,10 @@
 		goto disable;
 	}
 
-	if (unlikely(end > lmb_end_of_DRAM())) {
+	if (unlikely(end > memblock_end_of_DRAM())) {
 		pr_err("initrd extends beyond end of memory "
 		       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-		       end, (unsigned long)lmb_end_of_DRAM());
+		       end, (unsigned long)memblock_end_of_DRAM());
 		goto disable;
 	}
 
@@ -161,7 +161,7 @@
 	initrd_start = (unsigned long)__va(__pa(start));
 	initrd_end = initrd_start + INITRD_SIZE;
 
-	lmb_reserve(__pa(initrd_start), INITRD_SIZE);
+	memblock_reserve(__pa(initrd_start), INITRD_SIZE);
 
 	return;
 
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 46f84de..d0e24910 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -16,7 +16,7 @@
 #include <linux/pagemap.h>
 #include <linux/percpu.h>
 #include <linux/io.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/dma-mapping.h>
 #include <asm/mmu_context.h>
 #include <asm/mmzone.h>
@@ -33,7 +33,7 @@
 
 void __init generic_mem_init(void)
 {
-	lmb_add(__MEMORY_START, __MEMORY_SIZE);
+	memblock_add(__MEMORY_START, __MEMORY_SIZE);
 }
 
 void __init __weak plat_mem_setup(void)
@@ -176,12 +176,12 @@
 	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	phys = __lmb_alloc_base(sizeof(struct pglist_data),
+	phys = __memblock_alloc_base(sizeof(struct pglist_data),
 				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
 	/* Retry with all of system memory */
 	if (!phys)
-		phys = __lmb_alloc_base(sizeof(struct pglist_data),
-					SMP_CACHE_BYTES, lmb_end_of_DRAM());
+		phys = __memblock_alloc_base(sizeof(struct pglist_data),
+					SMP_CACHE_BYTES, memblock_end_of_DRAM());
 	if (!phys)
 		panic("Can't allocate pgdat for node %d\n", nid);
 
@@ -212,7 +212,7 @@
 
 	total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
 
-	paddr = lmb_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
+	paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
 	if (!paddr)
 		panic("Can't allocate bootmap for nid[%d]\n", nid);
 
@@ -227,9 +227,9 @@
 	 */
 	if (nid == 0) {
 		/* Reserve the sections we're already using. */
-		for (i = 0; i < lmb.reserved.cnt; i++)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+		for (i = 0; i < memblock.reserved.cnt; i++)
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
 	}
 
@@ -241,10 +241,10 @@
 	int i;
 
 	/* Add active regions with valid PFNs. */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		__add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -276,7 +276,7 @@
 	 * this catches the (definitely buggy) case of us accidentally
 	 * initializing the bootmem allocator with an invalid RAM area.
 	 */
-	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+	memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
 		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
 		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
 
@@ -284,7 +284,7 @@
 	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
 	 */
 	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+		memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
 
 	/*
 	 * Handle additional early reservations
@@ -299,27 +299,27 @@
 	unsigned long vaddr, end;
 	int nid;
 
-	lmb_init();
+	memblock_init();
 
 	sh_mv.mv_mem_init();
 
 	early_reserve_mem();
 
-	lmb_enforce_memory_limit(memory_limit);
-	lmb_analyze();
+	memblock_enforce_memory_limit(memory_limit);
+	memblock_analyze();
 
-	lmb_dump_all();
+	memblock_dump_all();
 
 	/*
 	 * Determine low and high memory ranges:
 	 */
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
 
 	nodes_clear(node_online_map);
 
 	memory_start = (unsigned long)__va(__MEMORY_START);
-	memory_end = memory_start + (memory_limit ?: lmb_phys_mem_size());
+	memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
 
 	uncached_init();
 	pmb_init();
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index a2e645f..3d85225 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,7 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
 #include <linux/pfn.h>
@@ -39,12 +39,12 @@
 	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
 			 PAGE_KERNEL);
 
-	lmb_add(start, end - start);
+	memblock_add(start, end - start);
 
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+	NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
 					     SMP_CACHE_BYTES, end));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
@@ -54,7 +54,7 @@
 
 	/* Node-local bootmap */
 	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+	bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
 				       PAGE_SIZE, end);
 	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
 			  start_pfn, end_pfn);
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 18623ba7..6379091 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -770,7 +770,7 @@
 		spin_unlock_irqrestore(&pmbe->lock, flags);
 	}
 
-	read_lock(&pmb_rwlock);
+	read_unlock(&pmb_rwlock);
 }
 #endif
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 6f1470b..c0015db 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -42,7 +42,7 @@
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 259e3fd..1dc07a0 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr  3 15:49:56 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -107,10 +107,9 @@
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
@@ -239,6 +238,7 @@
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
 CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -351,6 +351,7 @@
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
@@ -367,6 +368,7 @@
 # CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
@@ -386,9 +388,14 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
+
+#
+# Some wireless drivers require a rate control algorithm
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 
 #
 # Device Drivers
@@ -658,6 +665,7 @@
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
@@ -734,6 +742,8 @@
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGBEVF is not set
@@ -766,6 +776,7 @@
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -778,7 +789,6 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
@@ -816,6 +826,7 @@
 CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
@@ -840,6 +851,7 @@
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -848,6 +860,7 @@
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -871,6 +884,7 @@
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
 # CONFIG_NOZOMI is not set
 
 #
@@ -893,6 +907,8 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1306,11 +1322,14 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
 CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
@@ -1328,7 +1347,9 @@
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
 # CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 # CONFIG_HID_STANTUM is not set
@@ -1342,6 +1363,7 @@
 # CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1356,7 +1378,6 @@
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -1521,10 +1542,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -1706,8 +1723,8 @@
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1742,6 +1759,9 @@
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1769,12 +1789,12 @@
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
@@ -1895,6 +1915,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 0588b8c..69358b5 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -11,7 +11,6 @@
 
 #define L1_CACHE_SHIFT 5
 #define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
 
 #ifdef CONFIG_SPARC32
 #define SMP_CACHE_BYTES_SHIFT 5
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
deleted file mode 100644
index 6a352cb..0000000
--- a/arch/sparc/include/asm/lmb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
new file mode 100644
index 0000000..f12af88
--- /dev/null
+++ b/arch/sparc/include/asm/memblock.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_MEMBLOCK_H
+#define _SPARC64_MEMBLOCK_H
+
+#include <asm/oplib.h>
+
+#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 77f906d..0ece77f 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@
 #define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
 #define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
 
-BTFIXUPDEF_SETHI(none_mask)
 BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
 BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
 
 static inline int pte_none(pte_t pte)
 {
-	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+	return !pte_val(pte);
 }
 
 #define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@
 
 static inline int pmd_none(pmd_t pmd)
 {
-	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+	return !pmd_val(pmd);
 }
 
 #define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index cdc91d9..83e85c2 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -4,7 +4,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/list.h>
 #include <linux/slab.h>
@@ -86,7 +86,7 @@
 	hp->handle_size = handle_size;
 }
 
-static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
+static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size)
 {
 	unsigned int handle_size, alloc_size;
 	struct mdesc_handle *hp;
@@ -97,7 +97,7 @@
 		       mdesc_size);
 	alloc_size = PAGE_ALIGN(handle_size);
 
-	paddr = lmb_alloc(alloc_size, PAGE_SIZE);
+	paddr = memblock_alloc(alloc_size, PAGE_SIZE);
 
 	hp = NULL;
 	if (paddr) {
@@ -107,7 +107,7 @@
 	return hp;
 }
 
-static void mdesc_lmb_free(struct mdesc_handle *hp)
+static void mdesc_memblock_free(struct mdesc_handle *hp)
 {
 	unsigned int alloc_size;
 	unsigned long start;
@@ -120,9 +120,9 @@
 	free_bootmem_late(start, alloc_size);
 }
 
-static struct mdesc_mem_ops lmb_mdesc_ops = {
-	.alloc = mdesc_lmb_alloc,
-	.free  = mdesc_lmb_free,
+static struct mdesc_mem_ops memblock_mdesc_ops = {
+	.alloc = mdesc_memblock_alloc,
+	.free  = mdesc_memblock_free,
 };
 
 static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size)
@@ -914,7 +914,7 @@
 
 	printk("MDESC: Size is %lu bytes.\n", len);
 
-	hp = mdesc_alloc(len, &lmb_mdesc_ops);
+	hp = mdesc_alloc(len, &memblock_mdesc_ops);
 	if (hp == NULL) {
 		prom_printf("MDESC: alloc of %lu bytes failed.\n", len);
 		prom_halt();
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 0ec92c8..44faabc 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -657,6 +657,7 @@
 		cpuc->current_idx[i] = idx;
 
 		enc = perf_event_get_enc(cpuc->events[i]);
+		pcr &= ~mask_for_index(idx);
 		pcr |= event_encoding(enc, idx);
 	}
 out:
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index fb06ac2..466a327 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -20,7 +20,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_device.h>
 
 #include <asm/prom.h>
@@ -34,7 +34,7 @@
 
 void * __init prom_early_alloc(unsigned long size)
 {
-	unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES);
+	unsigned long paddr = memblock_alloc(size, SMP_CACHE_BYTES);
 	void *ret;
 
 	if (!paddr) {
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a7..e11b461 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@
 		goto out_unlock;
 	}
 	
-	if (action && tmp)
+	if (tmp)
 		tmp->next = action->next;
 	else
 		*actionp = action->next;
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837f..c6dfdaa 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@
 tl0_irq6:	BTRAP(0x46)
 #endif
 tl0_irq7:	TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
 tl0_irq8:	TRAP_IRQ(smp_kgdb_capture_client, 8)
 #else
 tl0_irq8:	BTRAP(0x48)
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index b2831dc..f043451 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -23,7 +23,7 @@
 #include <linux/cache.h>
 #include <linux/sort.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mmzone.h>
 #include <linux/gfp.h>
 
@@ -726,7 +726,7 @@
 		initrd_start = ramdisk_image;
 		initrd_end = ramdisk_image + sparc_ramdisk_size;
 
-		lmb_reserve(initrd_start, sparc_ramdisk_size);
+		memblock_reserve(initrd_start, sparc_ramdisk_size);
 
 		initrd_start += PAGE_OFFSET;
 		initrd_end += PAGE_OFFSET;
@@ -822,7 +822,7 @@
 	struct pglist_data *p;
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	paddr = lmb_alloc_nid(sizeof(struct pglist_data),
+	paddr = memblock_alloc_nid(sizeof(struct pglist_data),
 			      SMP_CACHE_BYTES, nid, nid_range);
 	if (!paddr) {
 		prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid);
@@ -843,7 +843,7 @@
 	if (p->node_spanned_pages) {
 		num_pages = bootmem_bootmap_pages(p->node_spanned_pages);
 
-		paddr = lmb_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
+		paddr = memblock_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
 				      nid_range);
 		if (!paddr) {
 			prom_printf("Cannot allocate bootmap for nid[%d]\n",
@@ -974,11 +974,11 @@
 {
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start, end;
 
-		start = lmb.memory.region[i].base;
+		start = memblock.memory.region[i].base;
 		end = start + size;
 		while (start < end) {
 			unsigned long this_end;
@@ -1010,7 +1010,7 @@
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mlgroup),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mlgroup),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1051,7 +1051,7 @@
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mblock),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mblock),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1279,8 +1279,8 @@
 
 static void __init bootmem_init_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned int i;
 
 	numadbg("bootmem_init_nonnuma()\n");
@@ -1292,15 +1292,15 @@
 
 	init_node_masks_nonnuma();
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start_pfn, end_pfn;
 
 		if (!size)
 			continue;
 
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -1338,9 +1338,9 @@
 
 	numadbg("  trim_reserved_in_node(%d)\n", nid);
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long start = lmb.reserved.region[i].base;
-		unsigned long size = lmb_size_bytes(&lmb.reserved, i);
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long start = memblock.reserved.region[i].base;
+		unsigned long size = memblock_size_bytes(&memblock.reserved, i);
 		unsigned long end = start + size;
 
 		reserve_range_in_node(nid, start, end);
@@ -1384,7 +1384,7 @@
 	unsigned long end_pfn;
 	int nid;
 
-	end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	end_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn = end_pfn;
 	min_low_pfn = (phys_base >> PAGE_SHIFT);
 
@@ -1734,7 +1734,7 @@
 		sun4v_ktsb_init();
 	}
 
-	lmb_init();
+	memblock_init();
 
 	/* Find available physical memory...
 	 *
@@ -1752,17 +1752,17 @@
 	phys_base = 0xffffffffffffffffUL;
 	for (i = 0; i < pavail_ents; i++) {
 		phys_base = min(phys_base, pavail[i].phys_addr);
-		lmb_add(pavail[i].phys_addr, pavail[i].reg_size);
+		memblock_add(pavail[i].phys_addr, pavail[i].reg_size);
 	}
 
-	lmb_reserve(kern_base, kern_size);
+	memblock_reserve(kern_base, kern_size);
 
 	find_ramdisk(phys_base);
 
-	lmb_enforce_memory_limit(cmdline_memory_size);
+	memblock_enforce_memory_limit(cmdline_memory_size);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
 	set_bit(0, mmu_context_bmap);
 
@@ -1816,8 +1816,8 @@
 	 */
 	for_each_possible_cpu(i) {
 		/* XXX Use node local allocations... XXX */
-		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
-		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		softirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 
 	/* Setup bootmem... */
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f5f75a5..b0b43aa 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2215,8 +2215,6 @@
 	BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
 
-	BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
 	BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index cf38846..4289f90 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2087,9 +2087,6 @@
 
 	BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
 
-	/* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
-	/* BTFIXUPSET_SETHI(none_mask, 0x00000000); */	/* Defaults to zero? */
-
 	BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
 #if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
 	BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/um/include/asm/arch_hweight.h
new file mode 100644
index 0000000..c656cf4
--- /dev/null
+++ b/arch/um/include/asm/arch_hweight.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_HWEIGHT_H
+#define _ASM_UM_HWEIGHT_H
+
+#include <asm-generic/bitops/arch_hweight.h>
+
+#endif
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index e22c969..6966342 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -81,7 +81,7 @@
 
 	current->thread.fault_catcher = NULL;
 
-	kunmap_atomic(page, KM_UML_USERCOPY);
+	kunmap_atomic((void *)addr, KM_UML_USERCOPY);
 
 	return n;
 }
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 93a11d7..e696144 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -10,6 +10,7 @@
 #include <errno.h>
 #include <fcntl.h>
 #include <string.h>
+#include <sys/stat.h>
 #include <sys/mman.h>
 #include <sys/param.h>
 #include "init.h"
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index ed7aeff..45bc940 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -41,13 +41,12 @@
 static u8 vga_set_basic_mode(void)
 {
 	struct biosregs ireg, oreg;
-	u16 ax;
 	u8 mode;
 
 	initregs(&ireg);
 
 	/* Query current mode */
-	ax = 0x0f00;
+	ireg.ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
 
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 63cb409..9cb2edb 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,7 +183,7 @@
 	u32 gsi_end;
 };
 extern struct mp_ioapic_gsi  mp_gsi_routing[];
-extern u32 gsi_end;
+extern u32 gsi_top;
 int mp_find_ioapic(u32 gsi);
 int mp_find_ioapic_pin(int ioapic, u32 gsi);
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
@@ -197,7 +197,7 @@
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
 static inline void probe_nr_irqs_gsi(void)	{ }
-#define gsi_end (NR_IRQS_LEGACY - 1)
+#define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
 
 struct io_apic_irq_attr;
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index b49d8ca..8c7ae43 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -110,6 +110,7 @@
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
 #define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
 #define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_IBSFETCHCTL		0xc0011030
 #define MSR_AMD64_IBSFETCHLINAD		0xc0011031
 #define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 8d8797e..cd2a31d 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -53,6 +53,8 @@
 extern struct pci_bus *pci_root_bus;
 extern struct pci_ops pci_root_ops;
 
+void pcibios_scan_specific_bus(int busn);
+
 /* pci-irq.c */
 
 struct irq_info {
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0797e74..cd28f9a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -77,6 +77,7 @@
 	if (0) {					\
 		pto_T__ pto_tmp__;			\
 		pto_tmp__ = (val);			\
+		(void)pto_tmp__;			\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
@@ -115,6 +116,7 @@
 	if (0) {							\
 		pao_T__ pao_tmp__;					\
 		pao_tmp__ = (val);					\
+		(void)pao_tmp__;					\
 	}								\
 	switch (sizeof(var)) {						\
 	case 1:								\
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 5e67c15..ed5903b 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -26,7 +26,7 @@
  */
 #define VMALLOC_OFFSET	(8 * 1024 * 1024)
 
-#ifndef __ASSEMBLER__
+#ifndef __ASSEMBLY__
 extern bool __vmalloc_start_set; /* set once high_memory is set */
 #endif
 
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index 48dcfa6..fd921c3 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -15,6 +15,8 @@
 struct saved_context {
 	u16 es, fs, gs, ss;
 	unsigned long cr0, cr2, cr3, cr4;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	struct desc_ptr gdt;
 	struct desc_ptr idt;
 	u16 ldt;
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index 06284f4..8d942afa 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -27,6 +27,8 @@
 	u16 ds, es, fs, gs, ss;
 	unsigned long gs_base, gs_kernel_base, fs_base;
 	unsigned long cr0, cr2, cr3, cr4, cr8;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	unsigned long efer;
 	u16 gdt_pad;
 	u16 gdt_limit;
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index b8fe48e..e7f4d33 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -451,7 +451,7 @@
  *
  * (Could use an alternative three way for this if there was one.)
  */
-static inline void rdtsc_barrier(void)
+static __always_inline void rdtsc_barrier(void)
 {
 	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
 	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 519b543..baa579c 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -142,6 +142,7 @@
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
  * @nmi_init			enable NMI on cpus
+ * @i8042_detect		pre-detect if i8042 controller exists
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
@@ -150,6 +151,7 @@
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
 	void (*nmi_init)(void);
+	int (*i8042_detect)(void);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 60cc405..c05872a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -118,7 +118,7 @@
 	if (gsi >= NR_IRQS_LEGACY)
 		irq = gsi;
 	else
-		irq = gsi_end + 1 + gsi;
+		irq = gsi_top + gsi;
 
 	return irq;
 }
@@ -129,10 +129,10 @@
 
 	if (irq < NR_IRQS_LEGACY)
 		gsi = isa_irq_to_gsi[irq];
-	else if (irq <= gsi_end)
+	else if (irq < gsi_top)
 		gsi = irq;
-	else if (irq <= (gsi_end + NR_IRQS_LEGACY))
-		gsi = irq - gsi_end;
+	else if (irq < (gsi_top + NR_IRQS_LEGACY))
+		gsi = irq - gsi_top;
 	else
 		gsi = 0xffffffff;
 
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5..fb7a5f0 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@
 		percpu_entry->states[cx->index].eax = cx->address;
 		percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
 	}
+
+	/*
+	 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+	 * then we should skip checking BM_STS for this C-state.
+	 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+	 */
+	if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+		cx->bm_sts_skip = 1;
+
 	return retval;
 }
 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e5086..fcc3c61f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,9 +157,14 @@
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
 			acpi_no_s4_hw_signature();
-		if (strncmp(str, "s4_nonvs", 8) == 0)
-			acpi_s4_no_nvs();
+		if (strncmp(str, "s4_nonvs", 8) == 0) {
+			pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+					"please use acpi_sleep=nonvs instead");
+			acpi_nvs_nosave();
+		}
 #endif
+		if (strncmp(str, "nonvs", 5) == 0)
+			acpi_nvs_nosave();
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc69..a96489e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -921,7 +921,7 @@
 	unsigned int value;
 
 	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
+	if (!x2apic_mode && !apic_phys)
 		return;
 
 	clear_local_APIC();
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 33f3563..e41ed24 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -89,8 +89,8 @@
 /* IO APIC gsi routing info */
 struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
 
-/* The last gsi number used */
-u32 gsi_end;
+/* The one past the highest gsi number used */
+u32 gsi_top;
 
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -1035,7 +1035,7 @@
 		if (gsi >= NR_IRQS_LEGACY)
 			irq = gsi;
 		else
-			irq = gsi_end + 1 + gsi;
+			irq = gsi_top + gsi;
 	}
 
 #ifdef CONFIG_X86_32
@@ -3853,7 +3853,7 @@
 {
 	int nr;
 
-	nr = gsi_end + 1 + NR_IRQS_LEGACY;
+	nr = gsi_top + NR_IRQS_LEGACY;
 	if (nr > nr_irqs_gsi)
 		nr_irqs_gsi = nr;
 
@@ -4294,8 +4294,8 @@
 	 */
 	nr_ioapic_registers[idx] = entries;
 
-	if (mp_gsi_routing[idx].gsi_end > gsi_end)
-		gsi_end = mp_gsi_routing[idx].gsi_end;
+	if (mp_gsi_routing[idx].gsi_end >= gsi_top)
+		gsi_top = mp_gsi_routing[idx].gsi_end + 1;
 
 	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
 	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
index ce7cde7..a36de5bb 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -368,22 +368,16 @@
 		return -ENODEV;
 
 	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (out_obj->type != ACPI_TYPE_BUFFER)
+		return -ENODEV;
 
 	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
-	if (errors) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (errors)
+		return -ENODEV;
 
 	supported = *((u32 *)(out_obj->buffer.pointer + 4));
-	if (!(supported & 0x1)) {
-		ret = -ENODEV;
-		goto out_free;
-	}
+	if (!(supported & 0x1))
+		return -ENODEV;
 
 out_free:
 	kfree(output.pointer);
@@ -397,13 +391,17 @@
 	struct pcc_memory_resource *mem_resource;
 	struct pcc_register_resource *reg_resource;
 	union acpi_object *out_obj, *member;
-	acpi_handle handle, osc_handle;
+	acpi_handle handle, osc_handle, pcch_handle;
 	int ret = 0;
 
 	status = acpi_get_handle(NULL, "\\_SB", &handle);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
+	status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
 	status = acpi_get_handle(handle, "_OSC", &osc_handle);
 	if (ACPI_SUCCESS(status)) {
 		ret = pcc_cpufreq_do_osc(&osc_handle);
@@ -543,13 +541,13 @@
 
 	if (!pcch_virt_addr) {
 		result = -1;
-		goto pcch_null;
+		goto out;
 	}
 
 	result = pcc_get_offset(cpu);
 	if (result) {
 		dprintk("init: PCCP evaluation failed\n");
-		goto free;
+		goto out;
 	}
 
 	policy->max = policy->cpuinfo.max_freq =
@@ -558,14 +556,15 @@
 		ioread32(&pcch_hdr->minimum_frequency) * 1000;
 	policy->cur = pcc_get_freq(cpu);
 
+	if (!policy->cur) {
+		dprintk("init: Unable to get current CPU frequency\n");
+		result = -EINVAL;
+		goto out;
+	}
+
 	dprintk("init: policy->max is %d, policy->min is %d\n",
 		policy->max, policy->min);
-
-	return 0;
-free:
-	pcc_clear_mapping();
-	free_percpu(pcc_cpu_info);
-pcch_null:
+out:
 	return result;
 }
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 7ec2123..3e90cce 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1023,13 +1023,12 @@
 	}
 	if (max_latency == 0) {
 		/*
-		 * Fam 11h always returns 0 as transition latency.
-		 * This is intended and means "very fast". While cpufreq core
-		 * and governors currently can handle that gracefully, better
-		 * set it to 1 to avoid problems in the future.
-		 * For all others it's a BIOS bug.
+		 * Fam 11h and later may return 0 as transition latency. This
+		 * is intended and means "very fast". While cpufreq core and
+		 * governors currently can handle that gracefully, better set it
+		 * to 1 to avoid problems in the future.
 		 */
-		if (boot_cpu_data.x86 != 0x11)
+		if (boot_cpu_data.x86 < 0x11)
 			printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
 				"latency\n");
 		max_latency = 1;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 707165d..18cc425 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -36,6 +36,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
+#include <linux/edac_mce.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
@@ -169,6 +170,15 @@
 		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
 			/*
+			 * If edac_mce is enabled, it will check the error type
+			 * and will process it, if it is a known error.
+			 * Otherwise, the error will be sent through mcelog
+			 * interface
+			 */
+			if (edac_mce_parse(mce))
+				return;
+
+			/*
 			 * When the buffer fills up discard new entries.
 			 * Assume that the earlier errors are the more
 			 * interesting ones:
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 611df11..c2897b7 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -102,8 +102,8 @@
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
   [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
   [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c2,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c3,
 };
 
 static u64 amd_pmu_event_map(int hw_event)
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index fdbc652..214ac86 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -72,6 +72,7 @@
 	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
 	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
 	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xb3, 0x1), /* SNOOPQ_REQUEST_OUTSTANDING */
 	EVENT_CONSTRAINT_END
 };
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7bca3c6..0d6fc71 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -729,7 +729,7 @@
 		struct e820entry *ei = &e820.map[i];
 
 		if (ei->type == E820_NVS)
-			hibernate_nvs_register(ei->addr, ei->size);
+			suspend_nvs_register(ei->addr, ei->size);
 	}
 
 	return 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85c..e5cc7e8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
 #include <asm/apic.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/hpet.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -191,6 +192,21 @@
 }
 #endif
 
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+	hpet_readback_cmp = 1;
+#endif
+}
+
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
 	{}
 };
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff1..4db7c4d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@
 	 * masked off.
 	 */
 sysret_audit:
-	movq %rax,%rsi		/* second arg, syscall return value */
-	cmpq $0,%rax		/* is it < 0? */
+	movq RAX-ARGOFFSET(%rsp),%rsi	/* second arg, syscall return value */
+	cmpq $0,%rsi		/* is it < 0? */
 	setl %al		/* 1 if so, 0 if not */
 	movzbl %al,%edi		/* zero-extend that into %edi */
 	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a198b7c..ba390d7 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -964,7 +964,7 @@
 
 void hpet_disable(void)
 {
-	if (is_hpet_capable()) {
+	if (is_hpet_capable() && hpet_virt_address) {
 		unsigned int cfg = hpet_readl(HPET_CFG);
 
 		if (hpet_legacy_int_enabled) {
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 7c9f02c..cafa7c8 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -276,16 +276,6 @@
 	.cls	= &i8259_sysdev_class,
 };
 
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
 static void mask_8259A(void)
 {
 	unsigned long flags;
@@ -407,3 +397,18 @@
 };
 
 struct legacy_pic *legacy_pic = &default_legacy_pic;
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error;
+
+	if (legacy_pic != &default_legacy_pic)
+		return 0;
+
+	error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sysdev_register(&device_i8259A);
+	return error;
+}
+
+device_initcall(i8259A_init_sysfs);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 4f4af75..01ab17a 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -572,7 +572,6 @@
 	return NOTIFY_STOP;
 }
 
-#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 int kgdb_ll_trap(int cmd, const char *str,
 		 struct pt_regs *regs, long err, int trap, int sig)
 {
@@ -590,7 +589,6 @@
 
 	return __kgdb_notify(&args, cmd);
 }
-#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
 static int
 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
@@ -625,6 +623,12 @@
 	return register_die_notifier(&kgdb_notifier);
 }
 
+static void kgdb_hw_overflow_handler(struct perf_event *event, int nmi,
+		struct perf_sample_data *data, struct pt_regs *regs)
+{
+	kgdb_ll_trap(DIE_DEBUG, "debug", regs, 0, 0, SIGTRAP);
+}
+
 void kgdb_arch_late(void)
 {
 	int i, cpu;
@@ -655,6 +659,7 @@
 		for_each_online_cpu(cpu) {
 			pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
 			pevent[0]->hw.sample_period = 1;
+			pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
 			if (pevent[0]->destroy != NULL) {
 				pevent[0]->destroy = NULL;
 				release_bp_slot(*pevent);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 345a4b1..675879b 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -640,8 +640,8 @@
 	/* Skip cs, ip, orig_ax and gs. */	\
 	"	subl $16, %esp\n"	\
 	"	pushl %fs\n"		\
-	"	pushl %ds\n"		\
 	"	pushl %es\n"		\
+	"	pushl %ds\n"		\
 	"	pushl %eax\n"		\
 	"	pushl %ebp\n"		\
 	"	pushl %edi\n"		\
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5ae5d24..d86dbf7 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -123,7 +123,7 @@
 	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
 	       m->apicid, m->apicver, m->apicaddr);
 
-	mp_register_ioapic(m->apicid, m->apicaddr, gsi_end + 1);
+	mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
 }
 
 static void print_MP_intsrc_info(struct mpc_intsrc *m)
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index e796448..5915e0b3 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -216,6 +216,12 @@
 		setup_boot_APIC_clock();
 };
 
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+	return 0;
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -233,6 +239,7 @@
 	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+	x86_platform.i8042_detect = mrst_i8042_detect;
 	x86_init.pci.init = pci_mrst_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index fb99f7e..078d4ec 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -103,11 +103,16 @@
 #define PMR_SOFTSTOPFAULT	0x40000000
 #define PMR_HARDSTOP		0x20000000
 
-#define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS		8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM		(MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY	4
+/*
+ * The maximum PHB bus number.
+ * x3950M2 (rare): 8 chassis, 48 PHBs per chassis = 384
+ * x3950M2: 4 chassis, 48 PHBs per chassis        = 192
+ * x3950 (PCIE): 8 chassis, 32 PHBs per chassis   = 256
+ * x3950 (PCIX): 8 chassis, 16 PHBs per chassis   = 128
+ */
+#define MAX_PHB_BUS_NUM		256
+
+#define PHBS_PER_CALGARY	  4
 
 /* register offsets in Calgary's internal register space */
 static const unsigned long tar_offsets[] = {
@@ -1051,8 +1056,6 @@
 	struct iommu_table *tbl;
 	int ret;
 
-	BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
-
 	bbar = busno_to_bbar(dev->bus->number);
 	ret = calgary_setup_tar(dev, bbar);
 	if (ret)
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e72d3fc..939b9e9 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -498,15 +498,10 @@
  * See erratum #27 (Misinterpreted MSI Requests May Result in
  * Corrupted LPC DMA Data) in AMD Publication #46837,
  * "SB700 Family Product Errata", Rev. 1.0, March 2010.
- *
- * Also force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
  */
 static void force_disable_hpet_msi(struct pci_dev *unused)
 {
 	hpet_msi_disable = 1;
-	hpet_readback_cmp = 1;
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 8e1aac8..e3af342 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -228,6 +228,14 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T7400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index de3b63ae..a60df9a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -238,6 +238,15 @@
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
 			early_per_cpu_map(x86_cpu_to_node_map, cpu);
+		/*
+		 * Ensure that the boot cpu numa_node is correct when the boot
+		 * cpu is on a node that doesn't have memory installed.
+		 * Also cpu_up() will call cpu_to_node() for APs when
+		 * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+		 * up later with c_init aka intel_init/amd_init.
+		 * So set them all (boot cpu and all APs).
+		 */
+		set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
 #endif
 #endif
 		/*
@@ -257,14 +266,6 @@
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
-	/*
-	 * make sure boot cpu numa_node is right, when boot cpu is on the
-	 * node that doesn't have mem installed
-	 */
-	set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id));
-#endif
-
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
 
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 7ded578..cb22acf 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -93,7 +93,7 @@
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_end + 1);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
 		pentry++;
 	}
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 142d70c..725ef4d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -526,6 +526,7 @@
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
+	int user_icebp = 0;
 	unsigned long dr6;
 	int si_code;
 
@@ -534,6 +535,14 @@
 	/* Filter out all the reserved bits which are preset to 1 */
 	dr6 &= ~DR6_RESERVED;
 
+	/*
+	 * If dr6 has no reason to give us about the origin of this trap,
+	 * then it's very likely the result of an icebp/int01 trap.
+	 * User wants a sigtrap for that.
+	 */
+	if (!dr6 && user_mode(regs))
+		user_icebp = 1;
+
 	/* Catch kmemcheck conditions first of all! */
 	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		return;
@@ -575,7 +584,7 @@
 		regs->flags &= ~X86_EFLAGS_TF;
 	}
 	si_code = get_si_code(tsk->thread.debugreg6);
-	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
 		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 61a1e8c..cd6da6b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,6 +5,7 @@
  */
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/module.h>
 
 #include <asm/bios_ebda.h>
 #include <asm/paravirt.h>
@@ -85,6 +86,7 @@
 };
 
 static void default_nmi_init(void) { };
+static int default_i8042_detect(void) { return 1; };
 
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
@@ -92,5 +94,8 @@
 	.set_wallclock			= mach_set_rtc_mmss,
 	.iommu_shutdown			= iommu_shutdown_noop,
 	.is_untracked_pat_range		= is_ISA_range,
-	.nmi_init			= default_nmi_init
+	.nmi_init			= default_nmi_init,
+	.i8042_detect			= default_i8042_detect
 };
+
+EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 81563e7..b1ed0a1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1815,6 +1815,9 @@
 
 		spte |= PT_WRITABLE_MASK;
 
+		if (!tdp_enabled && !(pte_access & ACC_WRITE_MASK))
+			spte &= ~PT_USER_MASK;
+
 		/*
 		 * Optimization: for pte sync, if spte was writable the hash
 		 * lookup is unnecessary (and expensive). Write protection
@@ -1870,10 +1873,14 @@
 
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
 			mmu_page_remove_parent_pte(child, sptep);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else if (pfn != spte_to_pfn(*sptep)) {
 			pgprintk("hfn old %lx new %lx\n",
 				 spte_to_pfn(*sptep), pfn);
 			rmap_remove(vcpu->kvm, sptep);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else
 			was_rmapped = 1;
 	}
@@ -2919,7 +2926,7 @@
 	return kvm_mmu_zap_page(kvm, page) + 1;
 }
 
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	struct kvm *kvm;
 	struct kvm *kvm_freed = NULL;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 89d66ca..2331bdc 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -342,6 +342,7 @@
 			/* advance table_gfn when emulating 1gb pages with 4k */
 			if (delta == 0)
 				table_gfn += PT_INDEX(addr, level);
+			access &= gw->pte_access;
 		} else {
 			direct = 0;
 			table_gfn = gw->table_gfn[level - 2];
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 96dc232..ce438e0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -28,6 +28,7 @@
 #include <linux/ftrace_event.h>
 #include <linux/slab.h>
 
+#include <asm/tlbflush.h>
 #include <asm/desc.h>
 
 #include <asm/virtext.h>
@@ -56,6 +57,8 @@
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
+static bool erratum_383_found __read_mostly;
+
 static const u32 host_save_user_msrs[] = {
 #ifdef CONFIG_X86_64
 	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -374,6 +377,31 @@
 	svm->vmcb->control.event_inj_err = error_code;
 }
 
+static void svm_init_erratum_383(void)
+{
+	u32 low, high;
+	int err;
+	u64 val;
+
+	/* Only Fam10h is affected */
+	if (boot_cpu_data.x86 != 0x10)
+		return;
+
+	/* Use _safe variants to not break nested virtualization */
+	val = native_read_msr_safe(MSR_AMD64_DC_CFG, &err);
+	if (err)
+		return;
+
+	val |= (1ULL << 47);
+
+	low  = lower_32_bits(val);
+	high = upper_32_bits(val);
+
+	native_write_msr_safe(MSR_AMD64_DC_CFG, low, high);
+
+	erratum_383_found = true;
+}
+
 static int has_svm(void)
 {
 	const char *msg;
@@ -429,6 +457,8 @@
 
 	wrmsrl(MSR_VM_HSAVE_PA, page_to_pfn(sd->save_area) << PAGE_SHIFT);
 
+	svm_init_erratum_383();
+
 	return 0;
 }
 
@@ -1410,8 +1440,59 @@
 	return 1;
 }
 
-static int mc_interception(struct vcpu_svm *svm)
+static bool is_erratum_383(void)
 {
+	int err, i;
+	u64 value;
+
+	if (!erratum_383_found)
+		return false;
+
+	value = native_read_msr_safe(MSR_IA32_MC0_STATUS, &err);
+	if (err)
+		return false;
+
+	/* Bit 62 may or may not be set for this mce */
+	value &= ~(1ULL << 62);
+
+	if (value != 0xb600000000010015ULL)
+		return false;
+
+	/* Clear MCi_STATUS registers */
+	for (i = 0; i < 6; ++i)
+		native_write_msr_safe(MSR_IA32_MCx_STATUS(i), 0, 0);
+
+	value = native_read_msr_safe(MSR_IA32_MCG_STATUS, &err);
+	if (!err) {
+		u32 low, high;
+
+		value &= ~(1ULL << 2);
+		low    = lower_32_bits(value);
+		high   = upper_32_bits(value);
+
+		native_write_msr_safe(MSR_IA32_MCG_STATUS, low, high);
+	}
+
+	/* Flush tlb to evict multi-match entries */
+	__flush_tlb_all();
+
+	return true;
+}
+
+static void svm_handle_mce(struct vcpu_svm *svm)
+{
+	if (is_erratum_383()) {
+		/*
+		 * Erratum 383 triggered. Guest state is corrupt so kill the
+		 * guest.
+		 */
+		pr_err("KVM: Guest triggered AMD Erratum 383\n");
+
+		set_bit(KVM_REQ_TRIPLE_FAULT, &svm->vcpu.requests);
+
+		return;
+	}
+
 	/*
 	 * On an #MC intercept the MCE handler is not called automatically in
 	 * the host. So do it by hand here.
@@ -1420,6 +1501,11 @@
 		"int $0x12\n");
 	/* not sure if we ever come back to this point */
 
+	return;
+}
+
+static int mc_interception(struct vcpu_svm *svm)
+{
 	return 1;
 }
 
@@ -3088,6 +3174,14 @@
 		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
 		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
 	}
+
+	/*
+	 * We need to handle MC intercepts here before the vcpu has a chance to
+	 * change the physical cpu
+	 */
+	if (unlikely(svm->vmcb->control.exit_code ==
+		     SVM_EXIT_EXCP_BASE + MC_VECTOR))
+		svm_handle_mce(svm);
 }
 
 #undef R
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 859a01a..ee03679 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1744,18 +1744,15 @@
 			     (guest_tr_ar & ~AR_TYPE_MASK)
 			     | AR_TYPE_BUSY_64_TSS);
 	}
-	vcpu->arch.efer |= EFER_LMA;
-	vmx_set_efer(vcpu, vcpu->arch.efer);
+	vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
 }
 
 static void exit_lmode(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.efer &= ~EFER_LMA;
-
 	vmcs_write32(VM_ENTRY_CONTROLS,
 		     vmcs_read32(VM_ENTRY_CONTROLS)
 		     & ~VM_ENTRY_IA32E_MODE);
-	vmx_set_efer(vcpu, vcpu->arch.efer);
+	vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
 }
 
 #endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05d571f..7fa89c3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1562,7 +1562,7 @@
 
 	r = -ENOMEM;
 	size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
-	entries = vmalloc(size);
+	entries = kmalloc(size, GFP_KERNEL);
 	if (!entries)
 		goto out;
 
@@ -1581,7 +1581,7 @@
 	r = n;
 
 out_free:
-	vfree(entries);
+	kfree(entries);
 out:
 	return r;
 }
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index acc15b2..64121a1 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -302,7 +302,7 @@
 		return -EINVAL;
 	}
 
-	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	new  = kzalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index f537087..8acaddd 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -34,8 +34,7 @@
  * memtype_lock protects the rbtree.
  */
 
-static void memtype_rb_augment_cb(struct rb_node *node);
-static struct rb_root memtype_rbroot = RB_AUGMENT_ROOT(&memtype_rb_augment_cb);
+static struct rb_root memtype_rbroot = RB_ROOT;
 
 static int is_node_overlap(struct memtype *node, u64 start, u64 end)
 {
@@ -56,7 +55,7 @@
 }
 
 /* Update 'subtree_max_end' for a node, based on node and its children */
-static void update_node_max_end(struct rb_node *node)
+static void memtype_rb_augment_cb(struct rb_node *node, void *__unused)
 {
 	struct memtype *data;
 	u64 max_end, child_max_end;
@@ -78,25 +77,6 @@
 	data->subtree_max_end = max_end;
 }
 
-/* Update 'subtree_max_end' for a node and all its ancestors */
-static void update_path_max_end(struct rb_node *node)
-{
-	u64 old_max_end, new_max_end;
-
-	while (node) {
-		struct memtype *data = container_of(node, struct memtype, rb);
-
-		old_max_end = data->subtree_max_end;
-		update_node_max_end(node);
-		new_max_end = data->subtree_max_end;
-
-		if (new_max_end == old_max_end)
-			break;
-
-		node = rb_parent(node);
-	}
-}
-
 /* Find the first (lowest start addr) overlapping range from rb tree */
 static struct memtype *memtype_rb_lowest_match(struct rb_root *root,
 				u64 start, u64 end)
@@ -190,12 +170,6 @@
 	return -EBUSY;
 }
 
-static void memtype_rb_augment_cb(struct rb_node *node)
-{
-	if (node)
-		update_path_max_end(node);
-}
-
 static void memtype_rb_insert(struct rb_root *root, struct memtype *newdata)
 {
 	struct rb_node **node = &(root->rb_node);
@@ -213,6 +187,7 @@
 
 	rb_link_node(&newdata->rb, parent, node);
 	rb_insert_color(&newdata->rb, root);
+	rb_augment_insert(&newdata->rb, memtype_rb_augment_cb, NULL);
 }
 
 int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
@@ -226,6 +201,7 @@
 		if (ret_type)
 			new->type = *ret_type;
 
+		new->subtree_max_end = new->end;
 		memtype_rb_insert(&memtype_rbroot, new);
 	}
 	return err;
@@ -233,13 +209,16 @@
 
 struct memtype *rbt_memtype_erase(u64 start, u64 end)
 {
+	struct rb_node *deepest;
 	struct memtype *data;
 
 	data = memtype_rb_exact_match(&memtype_rbroot, start, end);
 	if (!data)
 		goto out;
 
+	deepest = rb_augment_erase_begin(&data->rb);
 	rb_erase(&data->rb, &memtype_rbroot);
+	rb_augment_erase_end(deepest, memtype_rb_augment_cb, NULL);
 out:
 	return data;
 }
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 97da2ba..5525309 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -96,6 +96,7 @@
  *	  the fact the PCI specs explicitly allow address decoders to be
  *	  shared between expansion ROMs and other resource regions, it's
  *	  at least dangerous)
+ *	- bad resource sizes or overlaps with other regions
  *
  *  Our solution:
  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
@@ -136,6 +137,7 @@
 					 * child resource allocations in this
 					 * range.
 					 */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
@@ -182,6 +184,7 @@
 					idx, r, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
 					/* We'll assign a new address later */
+					dev->fw_addr[idx] = r->start;
 					r->end -= r->start;
 					r->start = 0;
 				}
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 0db5eaf..8d460ea 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -11,28 +11,14 @@
  */
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
-	int n, devfn;
-	long node;
+	int n;
 
 	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
-	for (n=0; n <= pcibios_last_bus; n++) {
-		u32 l;
-		if (pci_find_bus(0, n))
-			continue;
-		node = get_mp_bus_to_node(n);
-		for (devfn = 0; devfn < 256; devfn += 8) {
-			if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
-			    l != 0x0000 && l != 0xffff) {
-				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
-				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus_on_node(n, &pci_root_ops, node);
-				break;
-			}
-		}
-	}
+	for (n=0; n <= pcibios_last_bus; n++)
+		pcibios_scan_specific_bus(n);
 }
 
 int __init pci_legacy_init(void)
@@ -50,6 +36,28 @@
 	return 0;
 }
 
+void pcibios_scan_specific_bus(int busn)
+{
+	int devfn;
+	long node;
+	u32 l;
+
+	if (pci_find_bus(0, busn))
+		return;
+
+	node = get_mp_bus_to_node(busn);
+	for (devfn = 0; devfn < 256; devfn += 8) {
+		if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
+		    l != 0x0000 && l != 0xffff) {
+			DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
+			printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
+			pci_scan_bus_on_node(busn, &pci_root_ops, node);
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus);
+
 int __init pci_subsys_init(void)
 {
 	/*
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 7ef3a27..cb29191 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -66,8 +66,9 @@
 					  devfn, pos, 4, &pcie_cap))
 			return 0;
 
-		if (pcie_cap == 0xffffffff)
-			return 0;
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
 
 		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
 			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
@@ -76,7 +77,7 @@
 				return pos;
 		}
 
-		pos = pcie_cap >> 20;
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
 	}
 
 	return 0;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 0a979f3..1290ba5 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -105,6 +105,8 @@
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
 #endif
+	ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
+					       &ctxt->misc_enable);
 }
 
 /* Needed by apm.c */
@@ -152,6 +154,8 @@
  */
 static void __restore_processor_state(struct saved_context *ctxt)
 {
+	if (ctxt->misc_enable_saved)
+		wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
 	/*
 	 * control registers
 	 */
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bc07333..e367e30 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -105,7 +105,6 @@
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -146,15 +145,10 @@
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	bad_page_fault(regs, address, SIGKILL);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
 	return;
 
 do_sigbus:
diff --git a/block/blk-core.c b/block/blk-core.c
index 3bc5579..f0640d7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -467,6 +467,9 @@
 {
 	struct request_list *rl = &q->rq;
 
+	if (unlikely(rl->rq_pool))
+		return 0;
+
 	rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
 	rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
 	rl->elvpriv = 0;
@@ -570,9 +573,17 @@
 struct request_queue *
 blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 {
-	struct request_queue *q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+	struct request_queue *uninit_q, *q;
 
-	return blk_init_allocated_queue_node(q, rfn, lock, node_id);
+	uninit_q = blk_alloc_queue_node(GFP_KERNEL, node_id);
+	if (!uninit_q)
+		return NULL;
+
+	q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
+	if (!q)
+		blk_cleanup_queue(uninit_q);
+
+	return q;
 }
 EXPORT_SYMBOL(blk_init_queue_node);
 
@@ -592,10 +603,8 @@
 		return NULL;
 
 	q->node = node_id;
-	if (blk_init_free_list(q)) {
-		kmem_cache_free(blk_requestq_cachep, q);
+	if (blk_init_free_list(q))
 		return NULL;
-	}
 
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
@@ -618,7 +627,6 @@
 		return q;
 	}
 
-	blk_put_queue(q);
 	return NULL;
 }
 EXPORT_SYMBOL(blk_init_allocated_queue_node);
@@ -1141,13 +1149,10 @@
 	else
 		req->cmd_flags |= bio->bi_rw & REQ_FAILFAST_MASK;
 
-	if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+	if (bio_rw_flagged(bio, BIO_RW_DISCARD))
 		req->cmd_flags |= REQ_DISCARD;
-		if (bio_rw_flagged(bio, BIO_RW_BARRIER))
-			req->cmd_flags |= REQ_SOFTBARRIER;
-	} else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
+	if (bio_rw_flagged(bio, BIO_RW_BARRIER))
 		req->cmd_flags |= REQ_HARDBARRIER;
-
 	if (bio_rw_flagged(bio, BIO_RW_SYNCIO))
 		req->cmd_flags |= REQ_RW_SYNC;
 	if (bio_rw_flagged(bio, BIO_RW_META))
@@ -1578,7 +1583,7 @@
 	 * If it's a regular read/write or a barrier with data attached,
 	 * go through the normal accounting stuff before submission.
 	 */
-	if (bio_has_data(bio)) {
+	if (bio_has_data(bio) && !(rw & (1 << BIO_RW_DISCARD))) {
 		if (rw & WRITE) {
 			count_vm_events(PGPGOUT, count);
 		} else {
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index ed897b5..7982b83 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -14,7 +14,7 @@
 #include <linux/rbtree.h>
 #include <linux/ioprio.h>
 #include <linux/blktrace_api.h>
-#include "blk-cgroup.h"
+#include "cfq.h"
 
 /*
  * tunables
@@ -64,6 +64,9 @@
 static struct completion *ioc_gone;
 static DEFINE_SPINLOCK(ioc_gone_lock);
 
+static DEFINE_SPINLOCK(cic_index_lock);
+static DEFINE_IDA(cic_index_ida);
+
 #define CFQ_PRIO_LISTS		IOPRIO_BE_NR
 #define cfq_class_idle(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
 #define cfq_class_rt(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
@@ -271,6 +274,7 @@
 	unsigned int cfq_latency;
 	unsigned int cfq_group_isolation;
 
+	unsigned int cic_index;
 	struct list_head cic_list;
 
 	/*
@@ -430,6 +434,24 @@
 	cic->cfqq[is_sync] = cfqq;
 }
 
+#define CIC_DEAD_KEY	1ul
+#define CIC_DEAD_INDEX_SHIFT	1
+
+static inline void *cfqd_dead_key(struct cfq_data *cfqd)
+{
+	return (void *)(cfqd->cic_index << CIC_DEAD_INDEX_SHIFT | CIC_DEAD_KEY);
+}
+
+static inline struct cfq_data *cic_to_cfqd(struct cfq_io_context *cic)
+{
+	struct cfq_data *cfqd = cic->key;
+
+	if (unlikely((unsigned long) cfqd & CIC_DEAD_KEY))
+		return NULL;
+
+	return cfqd;
+}
+
 /*
  * We regard a request as SYNC, if it's either a read or has the SYNC bit
  * set (in which case it could also be direct WRITE).
@@ -857,7 +879,7 @@
 	if (!RB_EMPTY_NODE(&cfqg->rb_node))
 		cfq_rb_erase(&cfqg->rb_node, st);
 	cfqg->saved_workload_slice = 0;
-	blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
+	cfq_blkiocg_update_dequeue_stats(&cfqg->blkg, 1);
 }
 
 static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
@@ -917,8 +939,8 @@
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
-	blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
-	blkiocg_set_start_empty_time(&cfqg->blkg);
+	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
+	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
 }
 
 #ifdef CONFIG_CFQ_GROUP_IOSCHED
@@ -973,7 +995,7 @@
 
 	/* Add group onto cgroup list */
 	sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
-	blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+	cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
 					MKDEV(major, minor));
 	cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
 
@@ -1057,7 +1079,7 @@
 		 * it from cgroup list, then it will take care of destroying
 		 * cfqg also.
 		 */
-		if (!blkiocg_del_blkio_group(&cfqg->blkg))
+		if (!cfq_blkiocg_del_blkio_group(&cfqg->blkg))
 			cfq_destroy_cfqg(cfqd, cfqg);
 	}
 }
@@ -1399,10 +1421,10 @@
 {
 	elv_rb_del(&cfqq->sort_list, rq);
 	cfqq->queued[rq_is_sync(rq)]--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqq->cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 }
@@ -1460,8 +1482,8 @@
 	cfq_del_rq_rb(rq);
 
 	cfqq->cfqd->rq_queued--;
-	blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq),
-						rq_is_sync(rq));
+	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(rq), rq_is_sync(rq));
 	if (rq_is_meta(rq)) {
 		WARN_ON(!cfqq->meta_pending);
 		cfqq->meta_pending--;
@@ -1496,8 +1518,8 @@
 static void cfq_bio_merged(struct request_queue *q, struct request *req,
 				struct bio *bio)
 {
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg, bio_data_dir(bio),
-					cfq_bio_sync(bio));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(req))->blkg,
+					bio_data_dir(bio), cfq_bio_sync(bio));
 }
 
 static void
@@ -1517,8 +1539,8 @@
 	if (cfqq->next_rq == next)
 		cfqq->next_rq = rq;
 	cfq_remove_request(next);
-	blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(next),
-					rq_is_sync(next));
+	cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg,
+					rq_data_dir(next), rq_is_sync(next));
 }
 
 static int cfq_allow_merge(struct request_queue *q, struct request *rq,
@@ -1549,7 +1571,7 @@
 static inline void cfq_del_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	del_timer(&cfqd->idle_slice_timer);
-	blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_idle_time_stats(&cfqq->cfqg->blkg);
 }
 
 static void __cfq_set_active_queue(struct cfq_data *cfqd,
@@ -1558,7 +1580,7 @@
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
 				cfqd->serving_prio, cfqd->serving_type);
-		blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
+		cfq_blkiocg_update_avg_queue_size_stats(&cfqq->cfqg->blkg);
 		cfqq->slice_start = 0;
 		cfqq->dispatch_start = jiffies;
 		cfqq->allocated_slice = 0;
@@ -1889,7 +1911,7 @@
 	sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
-	blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
+	cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
@@ -1909,7 +1931,7 @@
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
-	blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
+	cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
 }
 
@@ -1964,6 +1986,15 @@
 	int process_refs, new_process_refs;
 	struct cfq_queue *__cfqq;
 
+	/*
+	 * If there are no process references on the new_cfqq, then it is
+	 * unsafe to follow the ->new_cfqq chain as other cfqq's in the
+	 * chain may have dropped their last reference (not just their
+	 * last process reference).
+	 */
+	if (!cfqq_process_refs(new_cfqq))
+		return;
+
 	/* Avoid a circular list and skip interim queue merges */
 	while ((__cfqq = new_cfqq->new_cfqq)) {
 		if (__cfqq == cfqq)
@@ -1972,17 +2003,17 @@
 	}
 
 	process_refs = cfqq_process_refs(cfqq);
+	new_process_refs = cfqq_process_refs(new_cfqq);
 	/*
 	 * If the process for the cfqq has gone away, there is no
 	 * sense in merging the queues.
 	 */
-	if (process_refs == 0)
+	if (process_refs == 0 || new_process_refs == 0)
 		return;
 
 	/*
 	 * Merge in the direction of the lesser amount of work.
 	 */
-	new_process_refs = cfqq_process_refs(new_cfqq);
 	if (new_process_refs >= process_refs) {
 		cfqq->new_cfqq = new_cfqq;
 		atomic_add(process_refs, &new_cfqq->ref);
@@ -2510,11 +2541,12 @@
 static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
 {
 	unsigned long flags;
+	unsigned long dead_key = (unsigned long) cic->key;
 
-	BUG_ON(!cic->dead_key);
+	BUG_ON(!(dead_key & CIC_DEAD_KEY));
 
 	spin_lock_irqsave(&ioc->lock, flags);
-	radix_tree_delete(&ioc->radix_root, cic->dead_key);
+	radix_tree_delete(&ioc->radix_root, dead_key >> CIC_DEAD_INDEX_SHIFT);
 	hlist_del_rcu(&cic->cic_list);
 	spin_unlock_irqrestore(&ioc->lock, flags);
 
@@ -2537,15 +2569,10 @@
 	__call_for_each_cic(ioc, cic_free_func);
 }
 
-static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void cfq_put_cooperator(struct cfq_queue *cfqq)
 {
 	struct cfq_queue *__cfqq, *next;
 
-	if (unlikely(cfqq == cfqd->active_queue)) {
-		__cfq_slice_expired(cfqd, cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
-	}
-
 	/*
 	 * If this queue was scheduled to merge with another queue, be
 	 * sure to drop the reference taken on that queue (and others in
@@ -2561,6 +2588,16 @@
 		cfq_put_queue(__cfqq);
 		__cfqq = next;
 	}
+}
+
+static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	if (unlikely(cfqq == cfqd->active_queue)) {
+		__cfq_slice_expired(cfqd, cfqq, 0);
+		cfq_schedule_dispatch(cfqd);
+	}
+
+	cfq_put_cooperator(cfqq);
 
 	cfq_put_queue(cfqq);
 }
@@ -2573,11 +2610,10 @@
 	list_del_init(&cic->queue_list);
 
 	/*
-	 * Make sure key == NULL is seen for dead queues
+	 * Make sure dead mark is seen for dead queues
 	 */
 	smp_wmb();
-	cic->dead_key = (unsigned long) cic->key;
-	cic->key = NULL;
+	cic->key = cfqd_dead_key(cfqd);
 
 	if (ioc->ioc_data == cic)
 		rcu_assign_pointer(ioc->ioc_data, NULL);
@@ -2596,7 +2632,7 @@
 static void cfq_exit_single_io_context(struct io_context *ioc,
 				       struct cfq_io_context *cic)
 {
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 
 	if (cfqd) {
 		struct request_queue *q = cfqd->queue;
@@ -2609,7 +2645,7 @@
 		 * race between exiting task and queue
 		 */
 		smp_read_barrier_depends();
-		if (cic->key)
+		if (cic->key == cfqd)
 			__cfq_exit_single_io_context(cfqd, cic);
 
 		spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2689,7 +2725,7 @@
 
 static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic)
 {
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 	struct cfq_queue *cfqq;
 	unsigned long flags;
 
@@ -2746,7 +2782,7 @@
 static void changed_cgroup(struct io_context *ioc, struct cfq_io_context *cic)
 {
 	struct cfq_queue *sync_cfqq = cic_to_cfqq(cic, 1);
-	struct cfq_data *cfqd = cic->key;
+	struct cfq_data *cfqd = cic_to_cfqd(cic);
 	unsigned long flags;
 	struct request_queue *q;
 
@@ -2883,12 +2919,13 @@
 	unsigned long flags;
 
 	WARN_ON(!list_empty(&cic->queue_list));
+	BUG_ON(cic->key != cfqd_dead_key(cfqd));
 
 	spin_lock_irqsave(&ioc->lock, flags);
 
 	BUG_ON(ioc->ioc_data == cic);
 
-	radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
+	radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
 	hlist_del_rcu(&cic->cic_list);
 	spin_unlock_irqrestore(&ioc->lock, flags);
 
@@ -2900,7 +2937,6 @@
 {
 	struct cfq_io_context *cic;
 	unsigned long flags;
-	void *k;
 
 	if (unlikely(!ioc))
 		return NULL;
@@ -2917,13 +2953,11 @@
 	}
 
 	do {
-		cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
+		cic = radix_tree_lookup(&ioc->radix_root, cfqd->cic_index);
 		rcu_read_unlock();
 		if (!cic)
 			break;
-		/* ->key must be copied to avoid race with cfq_exit_queue() */
-		k = cic->key;
-		if (unlikely(!k)) {
+		if (unlikely(cic->key != cfqd)) {
 			cfq_drop_dead_cic(cfqd, ioc, cic);
 			rcu_read_lock();
 			continue;
@@ -2956,7 +2990,7 @@
 
 		spin_lock_irqsave(&ioc->lock, flags);
 		ret = radix_tree_insert(&ioc->radix_root,
-						(unsigned long) cfqd, cic);
+						cfqd->cic_index, cic);
 		if (!ret)
 			hlist_add_head_rcu(&cic->cic_list, &ioc->cic_list);
 		spin_unlock_irqrestore(&ioc->lock, flags);
@@ -3223,7 +3257,7 @@
 				cfq_clear_cfqq_wait_request(cfqq);
 				__blk_run_queue(cfqd->queue);
 			} else {
-				blkiocg_update_idle_time_stats(
+				cfq_blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
 				cfq_mark_cfqq_must_dispatch(cfqq);
 			}
@@ -3251,7 +3285,7 @@
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
 	cfq_add_rq_rb(rq);
-	blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
+	cfq_blkiocg_update_io_add_stats(&(RQ_CFQG(rq))->blkg,
 			&cfqd->serving_group->blkg, rq_data_dir(rq),
 			rq_is_sync(rq));
 	cfq_rq_enqueued(cfqd, cfqq, rq);
@@ -3339,9 +3373,9 @@
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
-	blkiocg_update_completion_stats(&cfqq->cfqg->blkg, rq_start_time_ns(rq),
-			rq_io_start_time_ns(rq), rq_data_dir(rq),
-			rq_is_sync(rq));
+	cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg,
+			rq_start_time_ns(rq), rq_io_start_time_ns(rq),
+			rq_data_dir(rq), rq_is_sync(rq));
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--;
 
@@ -3516,6 +3550,9 @@
 	}
 
 	cic_set_cfqq(cic, NULL, 1);
+
+	cfq_put_cooperator(cfqq);
+
 	cfq_put_queue(cfqq);
 	return NULL;
 }
@@ -3702,16 +3739,38 @@
 
 	cfq_put_async_queues(cfqd);
 	cfq_release_cfq_groups(cfqd);
-	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
+	cfq_blkiocg_del_blkio_group(&cfqd->root_group.blkg);
 
 	spin_unlock_irq(q->queue_lock);
 
 	cfq_shutdown_timer_wq(cfqd);
 
+	spin_lock(&cic_index_lock);
+	ida_remove(&cic_index_ida, cfqd->cic_index);
+	spin_unlock(&cic_index_lock);
+
 	/* Wait for cfqg->blkg->key accessors to exit their grace periods. */
 	call_rcu(&cfqd->rcu, cfq_cfqd_free);
 }
 
+static int cfq_alloc_cic_index(void)
+{
+	int index, error;
+
+	do {
+		if (!ida_pre_get(&cic_index_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock(&cic_index_lock);
+		error = ida_get_new(&cic_index_ida, &index);
+		spin_unlock(&cic_index_lock);
+		if (error && error != -EAGAIN)
+			return error;
+	} while (error);
+
+	return index;
+}
+
 static void *cfq_init_queue(struct request_queue *q)
 {
 	struct cfq_data *cfqd;
@@ -3719,10 +3778,16 @@
 	struct cfq_group *cfqg;
 	struct cfq_rb_root *st;
 
+	i = cfq_alloc_cic_index();
+	if (i < 0)
+		return NULL;
+
 	cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
 	if (!cfqd)
 		return NULL;
 
+	cfqd->cic_index = i;
+
 	/* Init root service tree */
 	cfqd->grp_service_tree = CFQ_RB_ROOT;
 
@@ -3742,8 +3807,8 @@
 	 */
 	atomic_set(&cfqg->ref, 1);
 	rcu_read_lock();
-	blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
-					0);
+	cfq_blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg,
+					(void *)cfqd, 0);
 	rcu_read_unlock();
 #endif
 	/*
@@ -3984,6 +4049,7 @@
 	 */
 	if (elv_ioc_count_read(cfq_ioc_count))
 		wait_for_completion(&all_gone);
+	ida_destroy(&cic_index_ida);
 	cfq_slab_kill();
 }
 
diff --git a/block/cfq.h b/block/cfq.h
new file mode 100644
index 0000000..93448e5
--- /dev/null
+++ b/block/cfq.h
@@ -0,0 +1,115 @@
+#ifndef _CFQ_H
+#define _CFQ_H
+#include "blk-cgroup.h"
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync)
+{
+	blkiocg_update_io_add_stats(blkg, curr_blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue)
+{
+	blkiocg_update_dequeue_stats(blkg, dequeue);
+}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time)
+{
+	blkiocg_update_timeslice_used(blkg, time);
+}
+
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg)
+{
+	blkiocg_set_start_empty_time(blkg);
+}
+
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync)
+{
+	blkiocg_update_io_remove_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync)
+{
+	blkiocg_update_io_merged_stats(blkg, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_idle_time_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_avg_queue_size_stats(blkg);
+}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg)
+{
+	blkiocg_update_set_idle_time_stats(blkg);
+}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync)
+{
+	blkiocg_update_dispatch_stats(blkg, bytes, direction, sync);
+}
+
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync)
+{
+	blkiocg_update_completion_stats(blkg, start_time, io_start_time,
+				direction, sync);
+}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {
+	blkiocg_add_blkio_group(blkcg, blkg, key, dev);
+}
+
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return blkiocg_del_blkio_group(blkg);
+}
+
+#else /* CFQ_GROUP_IOSCHED */
+static inline void cfq_blkiocg_update_io_add_stats(struct blkio_group *blkg,
+	struct blkio_group *curr_blkg, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_update_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue) {}
+
+static inline void cfq_blkiocg_update_timeslice_used(struct blkio_group *blkg,
+			unsigned long time) {}
+static inline void cfq_blkiocg_set_start_empty_time(struct blkio_group *blkg) {}
+static inline void cfq_blkiocg_update_io_remove_stats(struct blkio_group *blkg,
+				bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_io_merged_stats(struct blkio_group *blkg,
+		bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_idle_time_stats(struct blkio_group *blkg)
+{
+}
+static inline void
+cfq_blkiocg_update_avg_queue_size_stats(struct blkio_group *blkg) {}
+
+static inline void
+cfq_blkiocg_update_set_idle_time_stats(struct blkio_group *blkg) {}
+
+static inline void cfq_blkiocg_update_dispatch_stats(struct blkio_group *blkg,
+				uint64_t bytes, bool direction, bool sync) {}
+static inline void cfq_blkiocg_update_completion_stats(struct blkio_group *blkg, uint64_t start_time, uint64_t io_start_time, bool direction, bool sync) {}
+
+static inline void cfq_blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev) {}
+static inline int cfq_blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	return 0;
+}
+
+#endif /* CFQ_GROUP_IOSCHED */
+#endif
diff --git a/block/elevator.c b/block/elevator.c
index 6df2b50..923a913 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -242,9 +242,11 @@
 {
 	struct elevator_type *e = NULL;
 	struct elevator_queue *eq;
-	int ret = 0;
 	void *data;
 
+	if (unlikely(q->elevator))
+		return 0;
+
 	INIT_LIST_HEAD(&q->queue_head);
 	q->last_merge = NULL;
 	q->end_sector = 0;
@@ -284,7 +286,7 @@
 	}
 
 	elevator_attach(q, eq, data);
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(elevator_init);
 
@@ -1097,7 +1099,7 @@
 	struct elevator_type *__e;
 	int len = 0;
 
-	if (!q->elevator)
+	if (!q->elevator || !blk_queue_stackable(q))
 		return sprintf(name, "none\n");
 
 	elv = e->elevator_type;
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index 98a6610..a854df2a 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -165,7 +165,7 @@
 
 	p = kmalloc(n, GFP_ATOMIC);
 	if (!p)
-		ablkcipher_walk_done(req, walk, -ENOMEM);
+		return ablkcipher_walk_done(req, walk, -ENOMEM);
 
 	base = p + 1;
 
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index d269a8f..446aced 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -46,6 +46,8 @@
 
 static unsigned char tsc_detected_unstable;
 static unsigned char tsc_marked_unstable;
+static unsigned char lapic_detected_unstable;
+static unsigned char lapic_marked_unstable;
 
 static void power_saving_mwait_init(void)
 {
@@ -75,9 +77,6 @@
 	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
 		(highest_subcstate - 1);
 
-	for_each_online_cpu(i)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
-
 #if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -86,13 +85,15 @@
 		 * AMD Fam10h TSC will tick in all
 		 * C/P/S0/S1 states when this bit is set.
 		 */
-		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return;
-
-		/*FALL THROUGH*/
+		if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			tsc_detected_unstable = 1;
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			lapic_detected_unstable = 1;
+		break;
 	default:
-		/* TSC could halt in idle */
+		/* TSC & LAPIC could halt in idle */
 		tsc_detected_unstable = 1;
+		lapic_detected_unstable = 1;
 	}
 #endif
 }
@@ -180,10 +181,20 @@
 				mark_tsc_unstable("TSC halts in idle");
 				tsc_marked_unstable = 1;
 			}
+			if (lapic_detected_unstable && !lapic_marked_unstable) {
+				int i;
+				/* LAPIC could halt in idle, so notify users */
+				for_each_online_cpu(i)
+					clockevents_notify(
+						CLOCK_EVT_NOTIFY_BROADCAST_ON,
+						&i);
+				lapic_marked_unstable = 1;
+			}
 			local_irq_disable();
 			cpu = smp_processor_id();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 			stop_critical_timings();
 
 			__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -192,8 +203,9 @@
 				__mwait(power_saving_mwait_eax, 1);
 
 			start_critical_timings();
-			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
-				&cpu);
+			if (lapic_marked_unstable)
+				clockevents_notify(
+					CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 			local_irq_enable();
 
 			if (jiffies > expire_time) {
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index 33181ad..b17d8de 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -119,6 +119,10 @@
 
 #define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
 
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+
 /******************************************************************************
  *
  * ACPI Specification constants (Do not change unless the specification changes)
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 64d1e5c..c3f43da 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -80,10 +80,6 @@
 acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
 
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 9070f1f..899d68a 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -125,6 +125,14 @@
  */
 u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE);
 
+/*
+ * Optionally truncate I/O addresses to 16 bits. Provides compatibility
+ * with other ACPI implementations. NOTE: During ACPICA initialization,
+ * this value is set to TRUE if any Windows OSI strings have been
+ * requested by the BIOS.
+ */
+u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE);
+
 /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
 
 struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 5900f13..3239158 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -90,7 +90,11 @@
 /*
  * hwgpe - GPE support
  */
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info);
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
 
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index a221ad4..7c2c336 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -69,7 +69,7 @@
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
 
@@ -78,9 +78,8 @@
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = (u8)
-	    (1 <<
-	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* Clear the wake/run bits up front */
 
@@ -100,106 +99,6 @@
 	return_ACPI_STATUS(AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_enable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless
- *              of type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-
-	ACPI_FUNCTION_TRACE(ev_enable_gpe);
-
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Clear the GPE (of stale events) */
-
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-
-	status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_disable_gpe
- *
- * PARAMETERS:  gpe_event_info          - GPE to disable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE,
- *              regardless of the type or number of references.
- *
- * Note: The GPE lock should be already acquired when this function is called.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_disable_gpe);
-
-
-	/*
-	 * Note: Always disable the GPE, even if we think that that it is already
-	 * disabled. It is possible that the AML or some other code has enabled
-	 * the GPE behind our back.
-	 */
-
-	/* Ensure the HW enable masks are current */
-
-	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Always H/W disable this GPE, even if we don't know the GPE type.
-	 * Simply clear the enable bit for this particular GPE, but do not
-	 * write out the current GPE enable mask since this may inadvertently
-	 * enable GPEs too early. An example is a rogue GPE that has arrived
-	 * during ACPICA initialization - possibly because AML or other code
-	 * has enabled the GPE.
-	 */
-	status = acpi_hw_low_disable_gpe(gpe_event_info);
-	return_ACPI_STATUS(status);
-}
-
 
 /*******************************************************************************
  *
@@ -451,10 +350,6 @@
 		return_VOID;
 	}
 
-	/* Update the GPE register masks for return to enabled state */
-
-	(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
-
 	/*
 	 * Take a snapshot of the GPE info for this level - we copy the info to
 	 * prevent a race condition with remove_handler/remove_block.
@@ -607,7 +502,7 @@
 		 * Disable the GPE, so it doesn't keep firing before the method has a
 		 * chance to run (it runs asynchronously with interrupts enabled).
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
@@ -644,7 +539,7 @@
 		 * Disable the GPE. The GPE will remain disabled a handler
 		 * is installed or ACPICA is restarted.
 		 */
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Unable to disable GPE[0x%2X]",
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 7c28f2d..341a38c 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -500,6 +500,19 @@
 
 			gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
 			gpe_event_info = &gpe_block->event_info[gpe_index];
+			gpe_number = gpe_index + gpe_block->block_base_number;
+
+			/*
+			 * If the GPE has already been enabled for runtime
+			 * signaling, make sure it remains enabled, but do not
+			 * increment its reference counter.
+			 */
+			if (gpe_event_info->runtime_count) {
+				acpi_set_gpe(gpe_device, gpe_number,
+						ACPI_GPE_ENABLE);
+				gpe_enabled_count++;
+				continue;
+			}
 
 			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
 				wake_gpe_count++;
@@ -516,7 +529,6 @@
 
 			/* Enable this GPE */
 
-			gpe_number = gpe_index + gpe_block->block_base_number;
 			status = acpi_enable_gpe(gpe_device, gpe_number,
 						 ACPI_GPE_TYPE_RUNTIME);
 			if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index cc82502..4a531cd 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -719,13 +719,6 @@
 	handler->context = context;
 	handler->method_node = gpe_event_info->dispatch.method_node;
 
-	/* Disable the GPE before installing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE (status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Install the handler */
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d5a5efc..18b3f14 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -70,6 +70,7 @@
 acpi_status acpi_enable(void)
 {
 	acpi_status status;
+	int retry;
 
 	ACPI_FUNCTION_TRACE(acpi_enable);
 
@@ -98,16 +99,18 @@
 
 	/* Sanity check that transition succeeded */
 
-	if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
-		ACPI_ERROR((AE_INFO,
-			    "Hardware did not enter ACPI mode"));
-		return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+	for (retry = 0; retry < 30000; ++retry) {
+		if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
+			if (retry != 0)
+				ACPI_WARNING((AE_INFO,
+				"Platform took > %d00 usec to enter ACPI mode", retry));
+			return_ACPI_STATUS(AE_OK);
+		}
+		acpi_os_stall(100);	/* 100 usec */
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-			  "Transition to ACPI mode successful\n"));
-
-	return_ACPI_STATUS(AE_OK);
+	ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
+	return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_enable)
@@ -210,6 +213,44 @@
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_clear_and_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info  - GPE to enable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status;
+
+	/*
+	 * We will only allow a GPE to be enabled if it has either an
+	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
+	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
+	 * first time it fires.
+	 */
+	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+		return_ACPI_STATUS(AE_NO_HANDLER);
+	}
+
+	/* Clear the GPE (of stale events) */
+	status = acpi_hw_clear_gpe(gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Enable the requested GPE */
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_set_gpe
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
@@ -249,11 +290,11 @@
 
 	switch (action) {
 	case ACPI_GPE_ENABLE:
-		status = acpi_ev_enable_gpe(gpe_event_info);
+		status = acpi_clear_and_enable_gpe(gpe_event_info);
 		break;
 
 	case ACPI_GPE_DISABLE:
-		status = acpi_ev_disable_gpe(gpe_event_info);
+		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 		break;
 
 	default:
@@ -316,7 +357,11 @@
 
 		gpe_event_info->runtime_count++;
 		if (gpe_event_info->runtime_count == 1) {
-			status = acpi_ev_enable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_clear_and_enable_gpe(gpe_event_info);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count--;
 				goto unlock_and_exit;
@@ -343,7 +388,7 @@
 		 */
 		gpe_event_info->wakeup_count++;
 		if (gpe_event_info->wakeup_count == 1) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
@@ -403,7 +448,12 @@
 
 		gpe_event_info->runtime_count--;
 		if (!gpe_event_info->runtime_count) {
-			status = acpi_ev_disable_gpe(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			if (ACPI_SUCCESS(status)) {
+				status = acpi_hw_low_set_gpe(gpe_event_info,
+							     ACPI_GPE_DISABLE);
+			}
+
 			if (ACPI_FAILURE(status)) {
 				gpe_event_info->runtime_count++;
 				goto unlock_and_exit;
@@ -424,7 +474,7 @@
 
 		gpe_event_info->wakeup_count--;
 		if (!gpe_event_info->wakeup_count) {
-			(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
+			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
 		}
 	}
 
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 6d32e09..675aaa9 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -201,6 +201,14 @@
 
 	acpi_ex_relinquish_interpreter();
 
+	/*
+	 * For compatibility with other ACPI implementations and to prevent
+	 * accidental deep sleeps, limit the sleep time to something reasonable.
+	 */
+	if (how_long > ACPI_MAX_SLEEP) {
+		how_long = ACPI_MAX_SLEEP;
+	}
+
 	acpi_os_sleep(how_long);
 
 	/* And now we must get the interpreter again */
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index bd72319..3450309 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -57,21 +57,47 @@
 
 /******************************************************************************
  *
- * FUNCTION:	acpi_hw_low_disable_gpe
+ * FUNCTION:	acpi_hw_gpe_register_bit
  *
- * PARAMETERS:	gpe_event_info	    - Info block for the GPE to be disabled
+ * PARAMETERS:	gpe_event_info	    - Info block for the GPE
+ *		gpe_register_info   - Info block for the GPE register
  *
  * RETURN:	Status
  *
- * DESCRIPTION: Disable a single GPE in the enable register.
+ * DESCRIPTION:	Compute GPE enable mask with one bit corresponding to the given
+ *		GPE set.
  *
  ******************************************************************************/
 
-acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+			     struct acpi_gpe_register_info *gpe_register_info)
+{
+	return (u32)1 << (gpe_event_info->gpe_number -
+				gpe_register_info->base_gpe_number);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION:	acpi_hw_low_set_gpe
+ *
+ * PARAMETERS:	gpe_event_info	    - Info block for the GPE to be disabled
+ *		action		    - Enable or disable
+ *
+ * RETURN:	Status
+ *
+ * DESCRIPTION: Enable or disable a single GPE in its enable register.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	u32 enable_mask;
+	u32 register_bit;
+
+	ACPI_FUNCTION_ENTRY();
 
 	/* Get the info block for the entire GPE register */
 
@@ -87,11 +113,27 @@
 		return (status);
 	}
 
-	/* Clear just the bit that corresponds to this GPE */
+	/* Set ot clear just the bit that corresponds to this GPE */
 
-	ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
-				     (gpe_event_info->gpe_number -
-				      gpe_register_info->base_gpe_number)));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
+	switch (action) {
+	case ACPI_GPE_COND_ENABLE:
+		if (!(register_bit & gpe_register_info->enable_for_run))
+			return (AE_BAD_PARAMETER);
+
+	case ACPI_GPE_ENABLE:
+		ACPI_SET_BIT(enable_mask, register_bit);
+		break;
+
+	case ACPI_GPE_DISABLE:
+		ACPI_CLEAR_BIT(enable_mask, register_bit);
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Invalid action\n"));
+		return (AE_BAD_PARAMETER);
+	}
 
 	/* Write the updated enable mask */
 
@@ -116,23 +158,11 @@
 acpi_status
 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 {
-	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 
 	ACPI_FUNCTION_ENTRY();
 
-	/* Get the info block for the entire GPE register */
-
-	gpe_register_info = gpe_event_info->register_info;
-	if (!gpe_register_info) {
-		return (AE_NOT_EXIST);
-	}
-
-	/* Write the entire GPE (runtime) enable register */
-
-	status = acpi_hw_write(gpe_register_info->enable_for_run,
-			       &gpe_register_info->enable_address);
-
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
 	return (status);
 }
 
@@ -150,21 +180,28 @@
 
 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 {
+	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
-	u8 register_bit;
+	u32 register_bit;
 
 	ACPI_FUNCTION_ENTRY();
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	/* Get the info block for the entire GPE register */
+
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		return (AE_NOT_EXIST);
+	}
+
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/*
 	 * Write a one to the appropriate bit in the status register to
 	 * clear this GPE.
 	 */
 	status = acpi_hw_write(register_bit,
-			       &gpe_event_info->register_info->status_address);
+			       &gpe_register_info->status_address);
 
 	return (status);
 }
@@ -187,7 +224,7 @@
 		       acpi_event_status * event_status)
 {
 	u32 in_byte;
-	u8 register_bit;
+	u32 register_bit;
 	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_status status;
 	acpi_event_status local_event_status = 0;
@@ -204,9 +241,8 @@
 
 	/* Get the register bitmask for this GPE */
 
-	register_bit = (u8)(1 <<
-			    (gpe_event_info->gpe_number -
-			     gpe_event_info->register_info->base_gpe_number));
+	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+						gpe_register_info);
 
 	/* GPE currently enabled? (enabled for runtime?) */
 
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index c10d587..e1d9c77 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -222,6 +222,12 @@
 	u32 one_byte;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
@@ -279,6 +285,12 @@
 	acpi_status status;
 	u32 i;
 
+	/* Truncate address to 16 bits if requested */
+
+	if (acpi_gbl_truncate_io_addresses) {
+		address &= ACPI_UINT16_MAX;
+	}
+
 	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 9bd6f05..4e5272c 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -193,6 +193,15 @@
 					acpi_ns_init_one_device, NULL, &info,
 					NULL);
 
+	/*
+	 * Any _OSI requests should be completed by now. If the BIOS has
+	 * requested any Windows OSI strings, we will always truncate
+	 * I/O addresses to 16 bits -- for Windows compatibility.
+	 */
+	if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) {
+		acpi_gbl_truncate_io_addresses = TRUE;
+	}
+
 	ACPI_FREE(info.evaluate_info);
 	if (ACPI_FAILURE(status)) {
 		goto error_exit;
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index db3946e..216e1e9 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/kref.h>
 #include <linux/rculist.h>
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2ebc391..864dd46 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -781,7 +781,7 @@
 	status = acpi_get_table(ACPI_SIG_ERST, 0,
 				(struct acpi_table_header **)&erst_tab);
 	if (status == AE_NOT_FOUND) {
-		pr_err(ERST_PFX "Table is not found!\n");
+		pr_info(ERST_PFX "Table is not found!\n");
 		goto err;
 	} else if (ACPI_FAILURE(status)) {
 		const char *msg = acpi_format_exception(status);
diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
index 814b192..8f8bd73 100644
--- a/drivers/acpi/atomicio.c
+++ b/drivers/acpi/atomicio.c
@@ -31,6 +31,7 @@
 #include <linux/kref.h>
 #include <linux/rculist.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <acpi/atomicio.h>
 
 #define ACPI_PFX "ACPI: "
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3026e3f..dc58402 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -868,9 +868,15 @@
 static void acpi_battery_notify(struct acpi_device *device, u32 event)
 {
 	struct acpi_battery *battery = acpi_driver_data(device);
+#ifdef CONFIG_ACPI_SYSFS_POWER
+	struct device *old;
+#endif
 
 	if (!battery)
 		return;
+#ifdef CONFIG_ACPI_SYSFS_POWER
+	old = battery->bat.dev;
+#endif
 	acpi_battery_update(battery);
 	acpi_bus_generate_proc_event(device, event,
 				     acpi_battery_present(battery));
@@ -879,7 +885,7 @@
 					acpi_battery_present(battery));
 #ifdef CONFIG_ACPI_SYSFS_POWER
 	/* acpi_battery_update could remove power_supply object */
-	if (battery->bat.dev)
+	if (old && battery->bat.dev)
 		power_supply_changed(&battery->bat);
 #endif
 }
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 2815df6..2bb28b9 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -214,7 +214,15 @@
 	.ident = "Sony VGN-SR290J",
 	.matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
+		},
+	},
+	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "VGN-NS50B_L",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"),
 		},
 	},
 	{
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index fd51c4a..7d857da 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -425,7 +425,7 @@
 		/* Button's GPE is run-wake GPE */
 		acpi_enable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count++;
 		device->wakeup.state.enabled = 1;
 	}
@@ -449,7 +449,7 @@
 	if (device->wakeup.flags.valid) {
 		acpi_disable_gpe(device->wakeup.gpe_device,
 				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE_RUN);
+				ACPI_GPE_TYPE_RUNTIME);
 		device->wakeup.run_wake_count--;
 		device->wakeup.state.enabled = 0;
 	}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e61d4f8..5f2027d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -79,7 +79,7 @@
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
 	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
 					 * OpReg are installed */
-	EC_FLAGS_FROZEN,		/* Transactions are suspended */
+	EC_FLAGS_BLOCKED,		/* Transactions are blocked */
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -293,7 +293,7 @@
 	if (t->rdata)
 		memset(t->rdata, 0, t->rlen);
 	mutex_lock(&ec->lock);
-	if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+	if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
 		status = -EINVAL;
 		goto unlock;
 	}
@@ -459,7 +459,7 @@
 
 EXPORT_SYMBOL(ec_transaction);
 
-void acpi_ec_suspend_transactions(void)
+void acpi_ec_block_transactions(void)
 {
 	struct acpi_ec *ec = first_ec;
 
@@ -468,11 +468,11 @@
 
 	mutex_lock(&ec->lock);
 	/* Prevent transactions from being carried out */
-	set_bit(EC_FLAGS_FROZEN, &ec->flags);
+	set_bit(EC_FLAGS_BLOCKED, &ec->flags);
 	mutex_unlock(&ec->lock);
 }
 
-void acpi_ec_resume_transactions(void)
+void acpi_ec_unblock_transactions(void)
 {
 	struct acpi_ec *ec = first_ec;
 
@@ -481,10 +481,20 @@
 
 	mutex_lock(&ec->lock);
 	/* Allow transactions to be carried out again */
-	clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+	clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
 	mutex_unlock(&ec->lock);
 }
 
+void acpi_ec_unblock_transactions_early(void)
+{
+	/*
+	 * Allow transactions to happen again (this function is called from
+	 * atomic context during wakeup, so we don't need to acquire the mutex).
+	 */
+	if (first_ec)
+		clear_bit(EC_FLAGS_BLOCKED, &first_ec->flags);
+}
+
 static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index acf2ab24..8a3b840 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -347,7 +347,6 @@
 {
 	int result = 0;
 
-
 #ifdef CONFIG_ACPI_PROCFS
 	acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
 	if (!acpi_fan_dir)
@@ -356,7 +355,9 @@
 
 	result = acpi_bus_register_driver(&acpi_fan_driver);
 	if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS
 		remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
 		return -ENODEV;
 	}
 
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e284113..f8f190e 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,8 +49,9 @@
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
-void acpi_ec_suspend_transactions(void);
-void acpi_ec_resume_transactions(void);
+void acpi_ec_block_transactions(void);
+void acpi_ec_unblock_transactions(void);
+void acpi_ec_unblock_transactions_early(void);
 
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5128435..e9699aae 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -223,7 +223,7 @@
 	type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
 	cpuid = acpi_get_cpuid(handle, type, acpi_id);
 
-	if (cpuid == -1)
+	if ((cpuid == -1) && (num_possible_cpus() > 1))
 		return false;
 
 	return true;
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index b1034a9..38ea0cc 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -581,6 +581,11 @@
 		return 0;
 	}
 
+#ifdef CONFIG_SMP
+	if (pr->id >= setup_max_cpus && pr->id != 0)
+		return 0;
+#endif
+
 	BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
 
 	/*
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2e8c27d..e9a8026 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -76,14 +76,19 @@
 module_param(max_cstate, uint, 0000);
 static unsigned int nocst __read_mostly;
 module_param(nocst, uint, 0000);
+static int bm_check_disable __read_mostly;
+module_param(bm_check_disable, uint, 0000);
 
 static unsigned int latency_factor __read_mostly = 2;
 module_param(latency_factor, uint, 0644);
 
-static s64 us_to_pm_timer_ticks(s64 t)
+#ifdef CONFIG_ACPI_PROCFS
+static u64 us_to_pm_timer_ticks(s64 t)
 {
 	return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
 }
+#endif
+
 /*
  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
  * For now disable this. Probably a bug somewhere else.
@@ -731,10 +736,10 @@
 
 		seq_puts(seq, "demotion[--] ");
 
-		seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
+		seq_printf(seq, "latency[%03d] usage[%08d] duration[%020Lu]\n",
 			   pr->power.states[i].latency,
 			   pr->power.states[i].usage,
-			   (unsigned long long)pr->power.states[i].time);
+			   us_to_pm_timer_ticks(pr->power.states[i].time));
 	}
 
       end:
@@ -763,6 +768,9 @@
 {
 	u32 bm_status = 0;
 
+	if (bm_check_disable)
+		return 0;
+
 	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
 	if (bm_status)
 		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
@@ -861,7 +869,6 @@
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
-	s64 sleep_ticks = 0;
 
 	pr = __get_cpu_var(processors);
 
@@ -906,8 +913,6 @@
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
-	sleep_ticks = us_to_pm_timer_ticks(idle_time);
-
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -918,7 +923,7 @@
 	cx->usage++;
 
 	lapic_timer_state_broadcast(pr, cx, 0);
-	cx->time += sleep_ticks;
+	cx->time += idle_time;
 	return idle_time;
 }
 
@@ -940,7 +945,6 @@
 	ktime_t  kt1, kt2;
 	s64 idle_time_ns;
 	s64 idle_time;
-	s64 sleep_ticks = 0;
 
 
 	pr = __get_cpu_var(processors);
@@ -951,7 +955,7 @@
 	if (acpi_idle_suspend)
 		return(acpi_idle_enter_c1(dev, state));
 
-	if (acpi_idle_bm_check()) {
+	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
 		if (dev->safe_state) {
 			dev->last_state = dev->safe_state;
 			return dev->safe_state->enter(dev, dev->safe_state);
@@ -1022,11 +1026,10 @@
 		spin_unlock(&c3_lock);
 	}
 	kt2 = ktime_get_real();
-	idle_time_ns = ktime_to_us(ktime_sub(kt2, kt1));
+	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
 	idle_time = idle_time_ns;
 	do_div(idle_time, NSEC_PER_USEC);
 
-	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(idle_time_ns);
 
@@ -1037,7 +1040,7 @@
 	cx->usage++;
 
 	lapic_timer_state_broadcast(pr, cx, 0);
-	cx->time += sleep_ticks;
+	cx->time += idle_time;
 	return idle_time;
 }
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4ab2275..2862c78 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -82,6 +82,20 @@
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
 /*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume.  Windows does that also for
+ * suspend to RAM.  However, it is known that this mechanism does not work on
+ * all machines, so we allow the user to disable it with the help of the
+ * 'acpi_sleep=nonvs' kernel command line option.
+ */
+static bool nvs_nosave;
+
+void __init acpi_nvs_nosave(void)
+{
+	nvs_nosave = true;
+}
+
+/*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
  * kernel command line option that causes the following variable to be set.
@@ -94,11 +108,13 @@
 }
 
 /**
- *	acpi_pm_disable_gpes - Disable the GPEs.
+ * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
  */
-static int acpi_pm_disable_gpes(void)
+static int acpi_pm_freeze(void)
 {
 	acpi_disable_all_gpes();
+	acpi_os_wait_events_complete(NULL);
+	acpi_ec_block_transactions();
 	return 0;
 }
 
@@ -112,6 +128,8 @@
 {
 	int error = acpi_sleep_prepare(acpi_target_sleep_state);
 
+	suspend_nvs_save();
+
 	if (error)
 		acpi_target_sleep_state = ACPI_STATE_S0;
 	return error;
@@ -126,7 +144,8 @@
 	int error = __acpi_pm_prepare();
 
 	if (!error)
-		acpi_disable_all_gpes();
+		acpi_pm_freeze();
+
 	return error;
 }
 
@@ -140,6 +159,9 @@
 {
 	u32 acpi_state = acpi_target_sleep_state;
 
+	suspend_nvs_free();
+	acpi_ec_unblock_transactions();
+
 	if (acpi_state == ACPI_STATE_S0)
 		return;
 
@@ -189,6 +211,10 @@
 	u32 acpi_state = acpi_suspend_states[pm_state];
 	int error = 0;
 
+	error = nvs_nosave ? 0 : suspend_nvs_alloc();
+	if (error)
+		return error;
+
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -256,6 +282,8 @@
 	 * acpi_leave_sleep_state will reenable specific GPEs later
 	 */
 	acpi_disable_all_gpes();
+	/* Allow EC transactions to happen. */
+	acpi_ec_unblock_transactions_early();
 
 	local_irq_restore(flags);
 	printk(KERN_DEBUG "Back to C!\n");
@@ -264,9 +292,16 @@
 	if (acpi_state == ACPI_STATE_S3)
 		acpi_restore_state_mem();
 
+	suspend_nvs_restore();
+
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
+static void acpi_suspend_finish(void)
+{
+	acpi_pm_finish();
+}
+
 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 {
 	u32 acpi_state;
@@ -288,7 +323,7 @@
 	.begin = acpi_suspend_begin,
 	.prepare_late = acpi_pm_prepare,
 	.enter = acpi_suspend_enter,
-	.wake = acpi_pm_finish,
+	.wake = acpi_suspend_finish,
 	.end = acpi_pm_end,
 };
 
@@ -314,9 +349,9 @@
 static struct platform_suspend_ops acpi_suspend_ops_old = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin_old,
-	.prepare_late = acpi_pm_disable_gpes,
+	.prepare_late = acpi_pm_freeze,
 	.enter = acpi_suspend_enter,
-	.wake = acpi_pm_finish,
+	.wake = acpi_suspend_finish,
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
@@ -366,20 +401,6 @@
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume.  However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
-	s4_no_nvs = true;
-}
-
 static unsigned long s4_hardware_signature;
 static struct acpi_table_facs *facs;
 static bool nosigcheck;
@@ -393,7 +414,7 @@
 {
 	int error;
 
-	error = s4_no_nvs ? 0 : hibernate_nvs_alloc();
+	error = nvs_nosave ? 0 : suspend_nvs_alloc();
 	if (!error) {
 		acpi_target_sleep_state = ACPI_STATE_S4;
 		acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -407,7 +428,7 @@
 	int error = acpi_pm_prepare();
 
 	if (!error)
-		hibernate_nvs_save();
+		suspend_nvs_save();
 
 	return error;
 }
@@ -430,12 +451,6 @@
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
-static void acpi_hibernation_finish(void)
-{
-	hibernate_nvs_free();
-	acpi_pm_finish();
-}
-
 static void acpi_hibernation_leave(void)
 {
 	/*
@@ -452,20 +467,14 @@
 		panic("ACPI S4 hardware signature mismatch");
 	}
 	/* Restore the NVS memory area */
-	hibernate_nvs_restore();
+	suspend_nvs_restore();
+	/* Allow EC transactions to happen. */
+	acpi_ec_unblock_transactions_early();
 }
 
-static int acpi_pm_pre_restore(void)
+static void acpi_pm_thaw(void)
 {
-	acpi_disable_all_gpes();
-	acpi_os_wait_events_complete(NULL);
-	acpi_ec_suspend_transactions();
-	return 0;
-}
-
-static void acpi_pm_restore_cleanup(void)
-{
-	acpi_ec_resume_transactions();
+	acpi_ec_unblock_transactions();
 	acpi_enable_all_runtime_gpes();
 }
 
@@ -473,12 +482,12 @@
 	.begin = acpi_hibernation_begin,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot,
-	.finish = acpi_hibernation_finish,
+	.finish = acpi_pm_finish,
 	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_pre_restore,
-	.restore_cleanup = acpi_pm_restore_cleanup,
+	.pre_restore = acpi_pm_freeze,
+	.restore_cleanup = acpi_pm_thaw,
 };
 
 /**
@@ -500,8 +509,8 @@
 	error = acpi_sleep_prepare(ACPI_STATE_S4);
 
 	if (!error) {
-		if (!s4_no_nvs)
-			error = hibernate_nvs_alloc();
+		if (!nvs_nosave)
+			error = suspend_nvs_alloc();
 		if (!error)
 			acpi_target_sleep_state = ACPI_STATE_S4;
 	}
@@ -510,12 +519,9 @@
 
 static int acpi_hibernation_pre_snapshot_old(void)
 {
-	int error = acpi_pm_disable_gpes();
-
-	if (!error)
-		hibernate_nvs_save();
-
-	return error;
+	acpi_pm_freeze();
+	suspend_nvs_save();
+	return 0;
 }
 
 /*
@@ -526,12 +532,12 @@
 	.begin = acpi_hibernation_begin_old,
 	.end = acpi_pm_end,
 	.pre_snapshot = acpi_hibernation_pre_snapshot_old,
-	.finish = acpi_hibernation_finish,
-	.prepare = acpi_pm_disable_gpes,
+	.prepare = acpi_pm_freeze,
+	.finish = acpi_pm_finish,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_pm_pre_restore,
-	.restore_cleanup = acpi_pm_restore_cleanup,
+	.pre_restore = acpi_pm_freeze,
+	.restore_cleanup = acpi_pm_thaw,
 	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_HIBERNATION */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index c79e789..f8db50a0 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -388,10 +388,12 @@
 	if (index < num_gpes) {
 		if (!strcmp(buf, "disable\n") &&
 				(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
+			result = acpi_disable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "enable\n") &&
 				!(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
+			result = acpi_enable_gpe(handle, index,
+						ACPI_GPE_TYPE_RUNTIME);
 		else if (!strcmp(buf, "clear\n") &&
 				(status & ACPI_EVENT_FLAG_SET))
 			result = acpi_clear_gpe(handle, index);
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 4b9d339..388747a 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -64,16 +64,13 @@
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid)
-			continue;
-
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
+		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
 		    || sleep_state > (u32) dev->wakeup.sleep_state)
 			continue;
 
 		/* The wake-up power should have been enabled already. */
-		acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
-				ACPI_GPE_ENABLE);
+		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 	}
 }
 
@@ -96,6 +93,8 @@
 		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
+		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
 		acpi_disable_wakeup_device_power(dev);
 	}
 }
@@ -109,13 +108,8 @@
 		struct acpi_device *dev = container_of(node,
 						       struct acpi_device,
 						       wakeup_list);
-		/* In case user doesn't load button driver */
-		if (!dev->wakeup.flags.always_enabled ||
-		    dev->wakeup.state.enabled)
-			continue;
- 		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
- 				ACPI_GPE_TYPE_WAKE);
-		dev->wakeup.state.enabled = 1;
+		if (dev->wakeup.flags.always_enabled)
+			dev->wakeup.state.enabled = 1;
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index f60b2b6..d31590e 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -122,6 +122,31 @@
 
 postcore_initcall(amba_init);
 
+static int amba_get_enable_pclk(struct amba_device *pcdev)
+{
+	struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
+	int ret;
+
+	pcdev->pclk = pclk;
+
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+
+	ret = clk_enable(pclk);
+	if (ret)
+		clk_put(pclk);
+
+	return ret;
+}
+
+static void amba_put_disable_pclk(struct amba_device *pcdev)
+{
+	struct clk *pclk = pcdev->pclk;
+
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -130,17 +155,33 @@
 {
 	struct amba_device *pcdev = to_amba_device(dev);
 	struct amba_driver *pcdrv = to_amba_driver(dev->driver);
-	struct amba_id *id;
+	struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+	int ret;
 
-	id = amba_lookup(pcdrv->id_table, pcdev);
+	do {
+		ret = amba_get_enable_pclk(pcdev);
+		if (ret)
+			break;
 
-	return pcdrv->probe(pcdev, id);
+		ret = pcdrv->probe(pcdev, id);
+		if (ret == 0)
+			break;
+
+		amba_put_disable_pclk(pcdev);
+	} while (0);
+
+	return ret;
 }
 
 static int amba_remove(struct device *dev)
 {
+	struct amba_device *pcdev = to_amba_device(dev);
 	struct amba_driver *drv = to_amba_driver(dev->driver);
-	return drv->remove(to_amba_device(dev));
+	int ret = drv->remove(pcdev);
+
+	amba_put_disable_pclk(pcdev);
+
+	return ret;
 }
 
 static void amba_shutdown(struct device *dev)
@@ -203,7 +244,6 @@
  */
 int amba_device_register(struct amba_device *dev, struct resource *parent)
 {
-	u32 pid, cid;
 	u32 size;
 	void __iomem *tmp;
 	int i, ret;
@@ -241,24 +281,34 @@
 		goto err_release;
 	}
 
-	/*
-	 * Read pid and cid based on size of resource
-	 * they are located at end of region
-	 */
-	for (pid = 0, i = 0; i < 4; i++)
-		pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
-	for (cid = 0, i = 0; i < 4; i++)
-		cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
+	ret = amba_get_enable_pclk(dev);
+	if (ret == 0) {
+		u32 pid, cid;
+
+		/*
+		 * Read pid and cid based on size of resource
+		 * they are located at end of region
+		 */
+		for (pid = 0, i = 0; i < 4; i++)
+			pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
+				(i * 8);
+		for (cid = 0, i = 0; i < 4; i++)
+			cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
+				(i * 8);
+
+		amba_put_disable_pclk(dev);
+
+		if (cid == 0xb105f00d)
+			dev->periphid = pid;
+
+		if (!dev->periphid)
+			ret = -ENODEV;
+	}
 
 	iounmap(tmp);
 
-	if (cid == 0xb105f00d)
-		dev->periphid = pid;
-
-	if (!dev->periphid) {
-		ret = -ENODEV;
+	if (ret)
 		goto err_release;
-	}
 
 	ret = device_add(&dev->dev);
 	if (ret)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8ca16f5..f252253 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1053,6 +1053,16 @@
 	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
 		return -ENODEV;
 
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
+	    pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
+	    pdev->subsystem_device == 0xcb89)
+		return -ENODEV;
+
 	/* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
 	 * At the moment, we can only use the AHCI mode. Let the users know
 	 * that for SAS drives they're out of luck.
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 573158a..7107a69 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,6 +32,11 @@
  *	A generic parallel ATA driver using libata
  */
 
+enum {
+	ATA_GEN_CLASS_MATCH		= (1 << 0),
+	ATA_GEN_FORCE_DMA		= (1 << 1),
+};
+
 /**
  *	generic_set_mode	-	mode setting
  *	@link: link to set up
@@ -46,13 +51,17 @@
 static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
 	struct ata_port *ap = link->ap;
+	const struct pci_device_id *id = ap->host->private_data;
 	int dma_enabled = 0;
 	struct ata_device *dev;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-	/* Bits 5 and 6 indicate if DMA is active on master/slave */
-	if (ap->ioaddr.bmdma_addr)
+	if (id->driver_data & ATA_GEN_FORCE_DMA) {
+		dma_enabled = 0xff;
+	} else if (ap->ioaddr.bmdma_addr) {
+		/* Bits 5 and 6 indicate if DMA is active on master/slave */
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
 		dma_enabled = 0xFF;
@@ -126,7 +135,7 @@
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	/* Don't use the generic entry unless instructed to do so */
-	if (id->driver_data == 1 && all_generic_ide == 0)
+	if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
 		return -ENODEV;
 
 	/* Devices that need care */
@@ -155,7 +164,7 @@
 			return rc;
 		pcim_pin_device(dev);
 	}
-	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, (void *)id, 0);
 }
 
 static struct pci_device_id ata_generic[] = {
@@ -167,7 +176,15 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_HINT,   PCI_DEVICE_ID_HINT_VXPROII_IDE), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE),
+	  .driver_data = ATA_GEN_FORCE_DMA },
+	/*
+	 * For some reason, MCP89 on MacBook 7,1 doesn't work with
+	 * ahci, use ata_generic instead.
+	 */
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA,
+	  PCI_VENDOR_ID_APPLE, 0xcb89,
+	  .driver_data = ATA_GEN_FORCE_DMA },
 #if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
@@ -175,7 +192,8 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),  },
 #endif	
 	/* Must come last. If you add entries adjust this table appropriately */
-	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
+	  .driver_data = ATA_GEN_CLASS_MATCH },
 	{ 0, },
 };
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1984a6e..81e772a 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -324,6 +324,7 @@
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	void __iomem *em_mmio = mmio + hpriv->em_loc;
+	const unsigned char *msg_buf = buf;
 	u32 em_ctl, msg;
 	unsigned long flags;
 	int i;
@@ -343,8 +344,8 @@
 	}
 
 	for (i = 0; i < size; i += 4) {
-		msg = buf[i] | buf[i + 1] << 8 |
-		      buf[i + 2] << 16 | buf[i + 3] << 24;
+		msg = msg_buf[i] | msg_buf[i + 1] << 8 |
+		      msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24;
 		writel(msg, em_mmio + i);
 	}
 
@@ -541,29 +542,11 @@
 	return -EINVAL;
 }
 
-static int ahci_is_device_present(void __iomem *port_mmio)
-{
-	u8 status = readl(port_mmio + PORT_TFDATA) & 0xff;
-
-	/* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */
-	if (status & (ATA_BUSY | ATA_DRQ))
-		return 0;
-
-	/* Make sure PxSSTS.DET is 3h */
-	status = readl(port_mmio + PORT_SCR_STAT) & 0xf;
-	if (status != 3)
-		return 0;
-	return 1;
-}
-
 void ahci_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
-	if (!ahci_is_device_present(port_mmio))
-		return;
-
 	/* start DMA */
 	tmp = readl(port_mmio + PORT_CMD);
 	tmp |= PORT_CMD_START;
@@ -1892,6 +1875,9 @@
 	}
 
 	sata_pmp_error_handler(ap);
+
+	if (!ata_dev_enabled(ap->link.device))
+		ahci_stop_engine(ap);
 }
 
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e925051..be7726d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -539,12 +539,12 @@
 		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
 
 	/* zero error counters. */
-	writel(0x8000, port + PORT_DECODE_ERR_THRESH);
-	writel(0x8000, port + PORT_CRC_ERR_THRESH);
-	writel(0x8000, port + PORT_HSHK_ERR_THRESH);
-	writel(0x0000, port + PORT_DECODE_ERR_CNT);
-	writel(0x0000, port + PORT_CRC_ERR_CNT);
-	writel(0x0000, port + PORT_HSHK_ERR_CNT);
+	writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+	writew(0x8000, port + PORT_CRC_ERR_THRESH);
+	writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+	writew(0x0000, port + PORT_DECODE_ERR_CNT);
+	writew(0x0000, port + PORT_CRC_ERR_CNT);
+	writew(0x0000, port + PORT_HSHK_ERR_CNT);
 
 	/* always use 64bit activation */
 	writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
@@ -622,6 +622,11 @@
 	irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
 	writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
 
+	/*
+	 * The barrier is required to ensure that writes to cmd_block reach
+	 * the memory before the write to PORT_CMD_ACTIVATE.
+	 */
+	wmb();
 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 	writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 
@@ -865,7 +870,7 @@
 	} else {
 		prb = &cb->atapi.prb;
 		sge = cb->atapi.sge;
-		memset(cb->atapi.cdb, 0, 32);
+		memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
 		memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
 
 		if (ata_is_data(qc->tf.protocol)) {
@@ -895,6 +900,11 @@
 	paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
 	activate = port + PORT_CMD_ACTIVATE + tag * 8;
 
+	/*
+	 * The barrier is required to ensure that writes to cmd_block reach
+	 * the memory before the write to PORT_CMD_ACTIVATE.
+	 */
+	wmb();
 	writel((u32)paddr, activate);
 	writel((u64)paddr >> 32, activate + 4);
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 0ecd0f6..4730c42 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -578,10 +578,24 @@
 
 	/*
 	 * vt6421 has problems talking to some drives.  The following
-	 * is the magic fix from Joseph Chan <JosephChan@via.com.tw>.
-	 * Please add proper documentation if possible.
+	 * is the fix from Joseph Chan <JosephChan@via.com.tw>.
+	 *
+	 * When host issues HOLD, device may send up to 20DW of data
+	 * before acknowledging it with HOLDA and the host should be
+	 * able to buffer them in FIFO.  Unfortunately, some WD drives
+	 * send upto 40DW before acknowledging HOLD and, in the
+	 * default configuration, this ends up overflowing vt6421's
+	 * FIFO, making the controller abort the transaction with
+	 * R_ERR.
+	 *
+	 * Rx52[2] is the internal 128DW FIFO Flow control watermark
+	 * adjusting mechanism enable bit and the default value 0
+	 * means host will issue HOLD to device when the left FIFO
+	 * size goes below 32DW.  Setting it to 1 makes the watermark
+	 * 64DW.
 	 *
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
+	 * http://article.gmane.org/gmane.linux.ide/46352
 	 */
 	if (pdev->device == 0x3249) {
 		pci_read_config_byte(pdev, 0x52, &tmp8);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9630fbd..9b9d3bd 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -673,7 +673,7 @@
 		 */
 		if (parent == NULL)
 			parent_kobj = virtual_device_parent(dev);
-		else if (parent->class)
+		else if (parent->class && !dev->class->ns_type)
 			return &parent->kobj;
 		else
 			parent_kobj = &parent->kobj;
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 6081e81..f1bf79d 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -133,6 +133,28 @@
 	return page;
 }
 
+static void brd_free_page(struct brd_device *brd, sector_t sector)
+{
+	struct page *page;
+	pgoff_t idx;
+
+	spin_lock(&brd->brd_lock);
+	idx = sector >> PAGE_SECTORS_SHIFT;
+	page = radix_tree_delete(&brd->brd_pages, idx);
+	spin_unlock(&brd->brd_lock);
+	if (page)
+		__free_page(page);
+}
+
+static void brd_zero_page(struct brd_device *brd, sector_t sector)
+{
+	struct page *page;
+
+	page = brd_lookup_page(brd, sector);
+	if (page)
+		clear_highpage(page);
+}
+
 /*
  * Free all backing store pages and radix tree. This must only be called when
  * there are no other users of the device.
@@ -189,6 +211,24 @@
 	return 0;
 }
 
+static void discard_from_brd(struct brd_device *brd,
+			sector_t sector, size_t n)
+{
+	while (n >= PAGE_SIZE) {
+		/*
+		 * Don't want to actually discard pages here because
+		 * re-allocating the pages can result in writeback
+		 * deadlocks under heavy load.
+		 */
+		if (0)
+			brd_free_page(brd, sector);
+		else
+			brd_zero_page(brd, sector);
+		sector += PAGE_SIZE >> SECTOR_SHIFT;
+		n -= PAGE_SIZE;
+	}
+}
+
 /*
  * Copy n bytes from src to the brd starting at sector. Does not sleep.
  */
@@ -300,6 +340,12 @@
 						get_capacity(bdev->bd_disk))
 		goto out;
 
+	if (unlikely(bio_rw_flagged(bio, BIO_RW_DISCARD))) {
+		err = 0;
+		discard_from_brd(brd, sector, bio->bi_size);
+		goto out;
+	}
+
 	rw = bio_rw(bio);
 	if (rw == READA)
 		rw = READ;
@@ -320,7 +366,7 @@
 }
 
 #ifdef CONFIG_BLK_DEV_XIP
-static int brd_direct_access (struct block_device *bdev, sector_t sector,
+static int brd_direct_access(struct block_device *bdev, sector_t sector,
 			void **kaddr, unsigned long *pfn)
 {
 	struct brd_device *brd = bdev->bd_disk->private_data;
@@ -437,6 +483,11 @@
 	blk_queue_max_hw_sectors(brd->brd_queue, 1024);
 	blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
 
+	brd->brd_queue->limits.discard_granularity = PAGE_SIZE;
+	brd->brd_queue->limits.max_discard_sectors = UINT_MAX;
+	brd->brd_queue->limits.discard_zeroes_data = 1;
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, brd->brd_queue);
+
 	disk = brd->brd_disk = alloc_disk(1 << part_shift);
 	if (!disk)
 		goto out_free_queue;
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e1d0e2cfe..72dae92 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -188,11 +188,11 @@
 
 	sa = h->scsi_ctlr;
 	stk = &sa->cmd_stack; 
+	stk->top++;
 	if (stk->top >= CMD_STACK_SIZE) {
 		printk("cciss: scsi_cmd_free called too many times.\n");
 		BUG();
 	}
-	stk->top++;
 	stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
 }
 
@@ -861,6 +861,7 @@
 	sh->n_io_port = 0;	// I don't think we use these two...
 	sh->this_id = SELF_SCSI_ID;  
 	sh->sg_tablesize = hba[ctlr]->maxsgentries;
+	sh->max_cmd_len = MAX_COMMAND_SIZE;
 
 	((struct cciss_scsi_adapter_data_t *) 
 		hba[ctlr]->scsi_ctlr)->scsi_host = sh;
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 91d1163..abb4ec6 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -386,7 +386,7 @@
 }
 
 /* pdev is NULL for eisa */
-static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev)
+static int __devinit cpqarray_register_ctlr( int i, struct pci_dev *pdev)
 {
 	struct request_queue *q;
 	int j;
@@ -503,7 +503,7 @@
 	return -1;
 }
 
-static int __init cpqarray_init_one( struct pci_dev *pdev,
+static int __devinit cpqarray_init_one( struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
 	int i;
@@ -740,7 +740,7 @@
 /*
  * Find an EISA controller's signature.  Set up an hba if we find it.
  */
-static int __init cpqarray_eisa_detect(void)
+static int __devinit cpqarray_eisa_detect(void)
 {
 	int i=0, j;
 	__u32 board_id;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index e9654c8..485ed8c 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -943,8 +943,7 @@
 	struct drbd_work  resync_work,
 			  unplug_work,
 			  md_sync_work,
-			  delay_probe_work,
-			  uuid_work;
+			  delay_probe_work;
 	struct timer_list resync_timer;
 	struct timer_list md_sync_timer;
 	struct timer_list delay_probe_timer;
@@ -1069,7 +1068,6 @@
 	struct timeval dps_time; /* delay-probes-start-time */
 	unsigned int dp_volume_last;  /* send_cnt of last delay probe */
 	int c_sync_rate; /* current resync rate after delay_probe magic */
-	atomic_t new_c_uuid;
 };
 
 static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
@@ -1476,7 +1474,6 @@
 extern int w_ov_finished(struct drbd_conf *, struct drbd_work *, int);
 extern int w_resync_inactive(struct drbd_conf *, struct drbd_work *, int);
 extern int w_resume_next_sg(struct drbd_conf *, struct drbd_work *, int);
-extern int w_io_error(struct drbd_conf *, struct drbd_work *, int);
 extern int w_send_write_hint(struct drbd_conf *, struct drbd_work *, int);
 extern int w_make_resync_request(struct drbd_conf *, struct drbd_work *, int);
 extern int w_send_dblock(struct drbd_conf *, struct drbd_work *, int);
@@ -1542,7 +1539,7 @@
 
 static inline void drbd_tcp_quickack(struct socket *sock)
 {
-	int __user val = 1;
+	int __user val = 2;
 	(void) drbd_setsockopt(sock, SOL_TCP, TCP_QUICKACK,
 			(char __user *)&val, sizeof(val));
 }
@@ -1728,7 +1725,7 @@
 	switch (mdev->ldev->dc.on_io_error) {
 	case EP_PASS_ON:
 		if (!forcedetach) {
-			if (printk_ratelimit())
+			if (__ratelimit(&drbd_ratelimit_state))
 				dev_err(DEV, "Local IO failed in %s."
 					     "Passing error on...\n", where);
 			break;
@@ -2219,8 +2216,6 @@
 		return 0;
 	if (test_bit(BITMAP_IO, &mdev->flags))
 		return 0;
-	if (atomic_read(&mdev->new_c_uuid))
-		return 0;
 	return 1;
 }
 
@@ -2241,9 +2236,6 @@
 	 * to avoid races with the reconnect code,
 	 * we need to atomic_inc within the spinlock. */
 
-	if (atomic_read(&mdev->new_c_uuid) && atomic_add_unless(&mdev->new_c_uuid, -1, 1))
-		drbd_queue_work_front(&mdev->data.work, &mdev->uuid_work);
-
 	spin_lock_irq(&mdev->req_lock);
 	while (!__inc_ap_bio_cond(mdev)) {
 		prepare_to_wait(&mdev->misc_wait, &wait, TASK_UNINTERRUPTIBLE);
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index be2d2da..7258c95 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1215,18 +1215,17 @@
 	     ns.pdsk == D_OUTDATED)) {
 		if (get_ldev(mdev)) {
 			if ((ns.role == R_PRIMARY || ns.peer == R_PRIMARY) &&
-			    mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE &&
-			    !atomic_read(&mdev->new_c_uuid))
-				atomic_set(&mdev->new_c_uuid, 2);
+			    mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE) {
+				drbd_uuid_new_current(mdev);
+				drbd_send_uuids(mdev);
+			}
 			put_ldev(mdev);
 		}
 	}
 
 	if (ns.pdsk < D_INCONSISTENT && get_ldev(mdev)) {
-		/* Diskless peer becomes primary or got connected do diskless, primary peer. */
-		if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0 &&
-		    !atomic_read(&mdev->new_c_uuid))
-			atomic_set(&mdev->new_c_uuid, 2);
+		if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0)
+			drbd_uuid_new_current(mdev);
 
 		/* D_DISKLESS Peer becomes secondary */
 		if (os.peer == R_PRIMARY && ns.peer == R_SECONDARY)
@@ -1237,8 +1236,6 @@
 	/* Last part of the attaching process ... */
 	if (ns.conn >= C_CONNECTED &&
 	    os.disk == D_ATTACHING && ns.disk == D_NEGOTIATING) {
-		kfree(mdev->p_uuid); /* We expect to receive up-to-date UUIDs soon. */
-		mdev->p_uuid = NULL; /* ...to not use the old ones in the mean time */
 		drbd_send_sizes(mdev, 0, 0);  /* to start sync... */
 		drbd_send_uuids(mdev);
 		drbd_send_state(mdev);
@@ -1350,24 +1347,6 @@
 	drbd_md_sync(mdev);
 }
 
-static int w_new_current_uuid(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	if (get_ldev(mdev)) {
-		if (mdev->ldev->md.uuid[UI_BITMAP] == 0) {
-			drbd_uuid_new_current(mdev);
-			if (get_net_conf(mdev)) {
-				drbd_send_uuids(mdev);
-				put_net_conf(mdev);
-			}
-			drbd_md_sync(mdev);
-		}
-		put_ldev(mdev);
-	}
-	atomic_dec(&mdev->new_c_uuid);
-	wake_up(&mdev->misc_wait);
-
-	return 1;
-}
 
 static int drbd_thread_setup(void *arg)
 {
@@ -2291,9 +2270,9 @@
  * with page_count == 0 or PageSlab.
  */
 static int _drbd_no_send_page(struct drbd_conf *mdev, struct page *page,
-		   int offset, size_t size)
+		   int offset, size_t size, unsigned msg_flags)
 {
-	int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, 0);
+	int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, msg_flags);
 	kunmap(page);
 	if (sent == size)
 		mdev->send_cnt += size>>9;
@@ -2301,7 +2280,7 @@
 }
 
 static int _drbd_send_page(struct drbd_conf *mdev, struct page *page,
-		    int offset, size_t size)
+		    int offset, size_t size, unsigned msg_flags)
 {
 	mm_segment_t oldfs = get_fs();
 	int sent, ok;
@@ -2314,14 +2293,15 @@
 	 * __page_cache_release a page that would actually still be referenced
 	 * by someone, leading to some obscure delayed Oops somewhere else. */
 	if (disable_sendpage || (page_count(page) < 1) || PageSlab(page))
-		return _drbd_no_send_page(mdev, page, offset, size);
+		return _drbd_no_send_page(mdev, page, offset, size, msg_flags);
 
+	msg_flags |= MSG_NOSIGNAL;
 	drbd_update_congested(mdev);
 	set_fs(KERNEL_DS);
 	do {
 		sent = mdev->data.socket->ops->sendpage(mdev->data.socket, page,
 							offset, len,
-							MSG_NOSIGNAL);
+							msg_flags);
 		if (sent == -EAGAIN) {
 			if (we_should_drop_the_connection(mdev,
 							  mdev->data.socket))
@@ -2350,9 +2330,11 @@
 {
 	struct bio_vec *bvec;
 	int i;
+	/* hint all but last page with MSG_MORE */
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		if (!_drbd_no_send_page(mdev, bvec->bv_page,
-				     bvec->bv_offset, bvec->bv_len))
+				     bvec->bv_offset, bvec->bv_len,
+				     i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
 			return 0;
 	}
 	return 1;
@@ -2362,12 +2344,13 @@
 {
 	struct bio_vec *bvec;
 	int i;
+	/* hint all but last page with MSG_MORE */
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		if (!_drbd_send_page(mdev, bvec->bv_page,
-				     bvec->bv_offset, bvec->bv_len))
+				     bvec->bv_offset, bvec->bv_len,
+				     i == bio->bi_vcnt -1 ? 0 : MSG_MORE))
 			return 0;
 	}
-
 	return 1;
 }
 
@@ -2375,9 +2358,11 @@
 {
 	struct page *page = e->pages;
 	unsigned len = e->size;
+	/* hint all but last page with MSG_MORE */
 	page_chain_for_each(page) {
 		unsigned l = min_t(unsigned, len, PAGE_SIZE);
-		if (!_drbd_send_page(mdev, page, 0, l))
+		if (!_drbd_send_page(mdev, page, 0, l,
+				page_chain_next(page) ? MSG_MORE : 0))
 			return 0;
 		len -= l;
 	}
@@ -2457,11 +2442,11 @@
 	p.dp_flags = cpu_to_be32(dp_flags);
 	set_bit(UNPLUG_REMOTE, &mdev->flags);
 	ok = (sizeof(p) ==
-		drbd_send(mdev, mdev->data.socket, &p, sizeof(p), MSG_MORE));
+		drbd_send(mdev, mdev->data.socket, &p, sizeof(p), dgs ? MSG_MORE : 0));
 	if (ok && dgs) {
 		dgb = mdev->int_dig_out;
 		drbd_csum_bio(mdev, mdev->integrity_w_tfm, req->master_bio, dgb);
-		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
 	}
 	if (ok) {
 		if (mdev->net_conf->wire_protocol == DRBD_PROT_A)
@@ -2510,11 +2495,11 @@
 		return 0;
 
 	ok = sizeof(p) == drbd_send(mdev, mdev->data.socket, &p,
-					sizeof(p), MSG_MORE);
+					sizeof(p), dgs ? MSG_MORE : 0);
 	if (ok && dgs) {
 		dgb = mdev->int_dig_out;
 		drbd_csum_ee(mdev, mdev->integrity_w_tfm, e, dgb);
-		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, 0);
 	}
 	if (ok)
 		ok = _drbd_send_zc_ee(mdev, e);
@@ -2708,7 +2693,6 @@
 	atomic_set(&mdev->net_cnt, 0);
 	atomic_set(&mdev->packet_seq, 0);
 	atomic_set(&mdev->pp_in_use, 0);
-	atomic_set(&mdev->new_c_uuid, 0);
 
 	mutex_init(&mdev->md_io_mutex);
 	mutex_init(&mdev->data.mutex);
@@ -2739,14 +2723,12 @@
 	INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
 	INIT_LIST_HEAD(&mdev->delay_probes);
 	INIT_LIST_HEAD(&mdev->delay_probe_work.list);
-	INIT_LIST_HEAD(&mdev->uuid_work.list);
 
 	mdev->resync_work.cb  = w_resync_inactive;
 	mdev->unplug_work.cb  = w_send_write_hint;
 	mdev->md_sync_work.cb = w_md_sync;
 	mdev->bm_io_work.w.cb = w_bitmap_io;
 	mdev->delay_probe_work.cb = w_delay_probes;
-	mdev->uuid_work.cb = w_new_current_uuid;
 	init_timer(&mdev->resync_timer);
 	init_timer(&mdev->md_sync_timer);
 	init_timer(&mdev->delay_probe_timer);
@@ -3799,7 +3781,7 @@
 	if (ret) {
 		fault_count++;
 
-		if (printk_ratelimit())
+		if (__ratelimit(&drbd_ratelimit_state))
 			dev_warn(DEV, "***Simulating %s failure\n",
 				_drbd_fault_str(type));
 	}
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 632e324..2151f18 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1114,6 +1114,12 @@
 		mdev->new_state_tmp.i = ns.i;
 		ns.i = os.i;
 		ns.disk = D_NEGOTIATING;
+
+		/* We expect to receive up-to-date UUIDs soon.
+		   To avoid a race in receive_state, free p_uuid while
+		   holding req_lock. I.e. atomic with the state change */
+		kfree(mdev->p_uuid);
+		mdev->p_uuid = NULL;
 	}
 
 	rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index bc9ab7f..dff4870 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -42,7 +42,6 @@
 #include <linux/unistd.h>
 #include <linux/vmalloc.h>
 #include <linux/random.h>
-#include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/scatterlist.h>
 #include "drbd_int.h"
@@ -571,6 +570,25 @@
 	return rv;
 }
 
+/* quoting tcp(7):
+ *   On individual connections, the socket buffer size must be set prior to the
+ *   listen(2) or connect(2) calls in order to have it take effect.
+ * This is our wrapper to do so.
+ */
+static void drbd_setbufsize(struct socket *sock, unsigned int snd,
+		unsigned int rcv)
+{
+	/* open coded SO_SNDBUF, SO_RCVBUF */
+	if (snd) {
+		sock->sk->sk_sndbuf = snd;
+		sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
+	}
+	if (rcv) {
+		sock->sk->sk_rcvbuf = rcv;
+		sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
+	}
+}
+
 static struct socket *drbd_try_connect(struct drbd_conf *mdev)
 {
 	const char *what;
@@ -592,6 +610,8 @@
 
 	sock->sk->sk_rcvtimeo =
 	sock->sk->sk_sndtimeo =  mdev->net_conf->try_connect_int*HZ;
+	drbd_setbufsize(sock, mdev->net_conf->sndbuf_size,
+			mdev->net_conf->rcvbuf_size);
 
        /* explicitly bind to the configured IP as source IP
 	*  for the outgoing connections.
@@ -670,6 +690,8 @@
 	s_listen->sk->sk_reuse    = 1; /* SO_REUSEADDR */
 	s_listen->sk->sk_rcvtimeo = timeo;
 	s_listen->sk->sk_sndtimeo = timeo;
+	drbd_setbufsize(s_listen, mdev->net_conf->sndbuf_size,
+			mdev->net_conf->rcvbuf_size);
 
 	what = "bind before listen";
 	err = s_listen->ops->bind(s_listen,
@@ -856,16 +878,6 @@
 	sock->sk->sk_priority = TC_PRIO_INTERACTIVE_BULK;
 	msock->sk->sk_priority = TC_PRIO_INTERACTIVE;
 
-	if (mdev->net_conf->sndbuf_size) {
-		sock->sk->sk_sndbuf = mdev->net_conf->sndbuf_size;
-		sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
-	}
-
-	if (mdev->net_conf->rcvbuf_size) {
-		sock->sk->sk_rcvbuf = mdev->net_conf->rcvbuf_size;
-		sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
-	}
-
 	/* NOT YET ...
 	 * sock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
 	 * sock->sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
@@ -1154,17 +1166,6 @@
 	unsigned n_bios = 0;
 	unsigned nr_pages = (ds + PAGE_SIZE -1) >> PAGE_SHIFT;
 
-	if (atomic_read(&mdev->new_c_uuid)) {
-		if (atomic_add_unless(&mdev->new_c_uuid, -1, 1)) {
-			drbd_uuid_new_current(mdev);
-			drbd_md_sync(mdev);
-
-			atomic_dec(&mdev->new_c_uuid);
-			wake_up(&mdev->misc_wait);
-		}
-		wait_event(mdev->misc_wait, !atomic_read(&mdev->new_c_uuid));
-	}
-
 	/* In most cases, we will only need one bio.  But in case the lower
 	 * level restrictions happen to be different at this offset on this
 	 * side than those of the sending peer, we may need to submit the
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 3397f11..654f1ef 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -102,32 +102,7 @@
 		}
 	}
 
-	/* if it was a local io error, we want to notify our
-	 * peer about that, and see if we need to
-	 * detach the disk and stuff.
-	 * to avoid allocating some special work
-	 * struct, reuse the request. */
-
-	/* THINK
-	 * why do we do this not when we detect the error,
-	 * but delay it until it is "done", i.e. possibly
-	 * until the next barrier ack? */
-
-	if (rw == WRITE &&
-	    ((s & RQ_LOCAL_MASK) && !(s & RQ_LOCAL_OK))) {
-		if (!(req->w.list.next == LIST_POISON1 ||
-		      list_empty(&req->w.list))) {
-			/* DEBUG ASSERT only; if this triggers, we
-			 * probably corrupt the worker list here */
-			dev_err(DEV, "req->w.list.next = %p\n", req->w.list.next);
-			dev_err(DEV, "req->w.list.prev = %p\n", req->w.list.prev);
-		}
-		req->w.cb = w_io_error;
-		drbd_queue_work(&mdev->data.work, &req->w);
-		/* drbd_req_free() is done in w_io_error */
-	} else {
-		drbd_req_free(req);
-	}
+	drbd_req_free(req);
 }
 
 static void queue_barrier(struct drbd_conf *mdev)
@@ -453,9 +428,6 @@
 		req->rq_state |= RQ_LOCAL_COMPLETED;
 		req->rq_state &= ~RQ_LOCAL_PENDING;
 
-		dev_alert(DEV, "Local WRITE failed sec=%llus size=%u\n",
-		      (unsigned long long)req->sector, req->size);
-		/* and now: check how to handle local io error. */
 		__drbd_chk_io_error(mdev, FALSE);
 		_req_may_be_done(req, m);
 		put_ldev(mdev);
@@ -475,22 +447,21 @@
 		req->rq_state |= RQ_LOCAL_COMPLETED;
 		req->rq_state &= ~RQ_LOCAL_PENDING;
 
-		dev_alert(DEV, "Local READ failed sec=%llus size=%u\n",
-		      (unsigned long long)req->sector, req->size);
-		/* _req_mod(req,to_be_send); oops, recursion... */
 		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
-		req->rq_state |= RQ_NET_PENDING;
-		inc_ap_pending(mdev);
 
 		__drbd_chk_io_error(mdev, FALSE);
 		put_ldev(mdev);
-		/* NOTE: if we have no connection,
-		 * or know the peer has no good data either,
-		 * then we don't actually need to "queue_for_net_read",
-		 * but we do so anyways, since the drbd_io_error()
-		 * and the potential state change to "Diskless"
-		 * needs to be done from process context */
 
+		/* no point in retrying if there is no good remote data,
+		 * or we have no connection. */
+		if (mdev->state.pdsk != D_UP_TO_DATE) {
+			_req_may_be_done(req, m);
+			break;
+		}
+
+		/* _req_mod(req,to_be_send); oops, recursion... */
+		req->rq_state |= RQ_NET_PENDING;
+		inc_ap_pending(mdev);
 		/* fall through: _req_mod(req,queue_for_net_read); */
 
 	case queue_for_net_read:
@@ -600,6 +571,9 @@
 		_req_may_be_done(req, m);
 		break;
 
+	case read_retry_remote_canceled:
+		req->rq_state &= ~RQ_NET_QUEUED;
+		/* fall through, in case we raced with drbd_disconnect */
 	case connection_lost_while_pending:
 		/* transfer log cleanup after connection loss */
 		/* assert something? */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index 16119d7..02d575d 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -91,6 +91,7 @@
 	send_failed,
 	handed_over_to_network,
 	connection_lost_while_pending,
+	read_retry_remote_canceled,
 	recv_acked_by_peer,
 	write_acked_by_peer,
 	write_acked_by_peer_and_sis, /* and set_in_sync */
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 727ff63..b623cee 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -224,9 +224,6 @@
 	enum drbd_req_event what;
 	int uptodate = bio_flagged(bio, BIO_UPTODATE);
 
-	if (error)
-		dev_warn(DEV, "p %s: error=%d\n",
-			 bio_data_dir(bio) == WRITE ? "write" : "read", error);
 	if (!error && !uptodate) {
 		dev_warn(DEV, "p %s: setting error to -EIO\n",
 			 bio_data_dir(bio) == WRITE ? "write" : "read");
@@ -257,20 +254,6 @@
 		complete_master_bio(mdev, &m);
 }
 
-int w_io_error(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	struct drbd_request *req = container_of(w, struct drbd_request, w);
-
-	/* NOTE: mdev->ldev can be NULL by the time we get here! */
-	/* D_ASSERT(mdev->ldev->dc.on_io_error != EP_PASS_ON); */
-
-	/* the only way this callback is scheduled is from _req_may_be_done,
-	 * when it is done and had a local write error, see comments there */
-	drbd_req_free(req);
-
-	return TRUE;
-}
-
 int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
 {
 	struct drbd_request *req = container_of(w, struct drbd_request, w);
@@ -280,12 +263,9 @@
 	 * to give the disk the chance to relocate that block */
 
 	spin_lock_irq(&mdev->req_lock);
-	if (cancel ||
-	    mdev->state.conn < C_CONNECTED ||
-	    mdev->state.pdsk <= D_INCONSISTENT) {
-		_req_mod(req, send_canceled);
+	if (cancel || mdev->state.pdsk != D_UP_TO_DATE) {
+		_req_mod(req, read_retry_remote_canceled);
 		spin_unlock_irq(&mdev->req_lock);
-		dev_alert(DEV, "WE ARE LOST. Local IO failure, no peer.\n");
 		return 1;
 	}
 	spin_unlock_irq(&mdev->req_lock);
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 6f907eb..6d34f40 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -37,7 +37,7 @@
 #include <linux/wait.h>
 
 #include <linux/skbuff.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 40aec0f..42d69d4 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -244,7 +244,7 @@
 	if (rel) {
 		hdr[0] |= 0x80 + bcsp->msgq_txseq;
 		BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
-		bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
+		bcsp->msgq_txseq = (bcsp->msgq_txseq + 1) & 0x07;
 	}
 
 	if (bcsp->use_crc)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index f09fc0e..7cfcc62 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1123,6 +1123,7 @@
 
 config RAMOOPS
 	tristate "Log panic/oops to a RAM buffer"
+	depends on HAS_IOMEM
 	default n
 	help
 	  This enables panic and oops messages to be logged to a circular
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 4b51982..d2abf51 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -97,20 +97,18 @@
 void agp_alloc_page_array(size_t size, struct agp_memory *mem)
 {
 	mem->pages = NULL;
-	mem->vmalloc_flag = false;
 
 	if (size <= 2*PAGE_SIZE)
-		mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
+		mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
 	if (mem->pages == NULL) {
 		mem->pages = vmalloc(size);
-		mem->vmalloc_flag = true;
 	}
 }
 EXPORT_SYMBOL(agp_alloc_page_array);
 
 void agp_free_page_array(struct agp_memory *mem)
 {
-	if (mem->vmalloc_flag) {
+	if (is_vmalloc_addr(mem->pages)) {
 		vfree(mem->pages);
 	} else {
 		kfree(mem->pages);
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9344216..a754715 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1216,17 +1216,20 @@
 
 		/* G33's GTT size defined in gmch_ctrl */
 		pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl);
-		switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) {
-		case G33_PGETBL_SIZE_1M:
+		switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
+		case I830_GMCH_GMS_STOLEN_512:
+			size = 512;
+			break;
+		case I830_GMCH_GMS_STOLEN_1024:
 			size = 1024;
 			break;
-		case G33_PGETBL_SIZE_2M:
-			size = 2048;
+		case I830_GMCH_GMS_STOLEN_8192:
+			size = 8*1024;
 			break;
 		default:
 			dev_info(&agp_bridge->dev->dev,
 				 "unknown page table size 0x%x, assuming 512KB\n",
-				(gmch_ctrl & G33_PGETBL_SIZE_MASK));
+				(gmch_ctrl & I830_GMCH_GMS_MASK));
 			size = 512;
 		}
 	} else {
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 35603dd..094bdc3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -302,6 +302,12 @@
 
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
+#ifdef CONFIG_PCI
+static int pci_registered;
+#endif
+#ifdef CONFIG_PPC_OF
+static int of_registered;
+#endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
@@ -1018,7 +1024,7 @@
 		else if (smi_result == SI_SM_IDLE)
 			schedule_timeout_interruptible(100);
 		else
-			schedule_timeout_interruptible(0);
+			schedule_timeout_interruptible(1);
 	}
 	return 0;
 }
@@ -3314,6 +3320,8 @@
 	rv = pci_register_driver(&ipmi_pci_driver);
 	if (rv)
 		printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
+	else
+		pci_registered = 1;
 #endif
 
 #ifdef CONFIG_ACPI
@@ -3330,6 +3338,7 @@
 
 #ifdef CONFIG_PPC_OF
 	of_register_platform_driver(&ipmi_of_platform_driver);
+	of_registered = 1;
 #endif
 
 	/* We prefer devices with interrupts, but in the case of a machine
@@ -3383,11 +3392,13 @@
 	if (unload_when_empty && list_empty(&smi_infos)) {
 		mutex_unlock(&smi_infos_lock);
 #ifdef CONFIG_PCI
-		pci_unregister_driver(&ipmi_pci_driver);
+		if (pci_registered)
+			pci_unregister_driver(&ipmi_pci_driver);
 #endif
 
 #ifdef CONFIG_PPC_OF
-		of_unregister_platform_driver(&ipmi_of_platform_driver);
+		if (of_registered)
+			of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
 		driver_unregister(&ipmi_driver.driver);
 		printk(KERN_WARNING PFX
@@ -3478,14 +3489,16 @@
 		return;
 
 #ifdef CONFIG_PCI
-	pci_unregister_driver(&ipmi_pci_driver);
+	if (pci_registered)
+		pci_unregister_driver(&ipmi_pci_driver);
 #endif
 #ifdef CONFIG_ACPI
 	pnp_unregister_driver(&ipmi_pnp_driver);
 #endif
 
 #ifdef CONFIG_PPC_OF
-	of_unregister_platform_driver(&ipmi_of_platform_driver);
+	if (of_registered)
+		of_unregister_platform_driver(&ipmi_of_platform_driver);
 #endif
 
 	mutex_lock(&smi_infos_lock);
diff --git a/drivers/char/n_gsm.c b/drivers/char/n_gsm.c
index c4161d5..e4089c4 100644
--- a/drivers/char/n_gsm.c
+++ b/drivers/char/n_gsm.c
@@ -904,9 +904,7 @@
 	int len;
 	/* Priority ordering: We should do priority with RR of the groups */
 	int i = 1;
-	unsigned long flags;
 
-	spin_lock_irqsave(&gsm->tx_lock, flags);
 	while (i < NUM_DLCI) {
 		struct gsm_dlci *dlci;
 
@@ -927,7 +925,6 @@
 		if (len == 0)
 			i++;
 	}
-	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -2230,12 +2227,16 @@
 static void gsmld_write_wakeup(struct tty_struct *tty)
 {
 	struct gsm_mux *gsm = tty->disc_data;
+	unsigned long flags;
 
 	/* Queue poll */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	gsm_data_kick(gsm);
-	if (gsm->tx_bytes < TX_THRESH_LO)
+	if (gsm->tx_bytes < TX_THRESH_LO) {
+		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_dlci_data_sweep(gsm);
+		spin_unlock_irqrestore(&gsm->tx_lock, flags);
+	}
 }
 
 /**
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d15630..878ac0c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -493,7 +493,7 @@
                 sysrq_key_table[i] = op_p;
 }
 
-static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
 {
 	struct sysrq_key_op *op_p;
 	int orig_log_level;
@@ -580,8 +580,12 @@
 	case KEY_RIGHTALT:
 		if (value)
 			sysrq_alt = code;
-		else if (sysrq_down && code == sysrq_alt_use)
-			sysrq_down = false;
+		else {
+			if (sysrq_down && code == sysrq_alt_use)
+				sysrq_down = false;
+
+			sysrq_alt = 0;
+		}
 		break;
 
 	case KEY_SYSRQ:
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8e00b4d..792868d 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -224,6 +224,7 @@
 	u8	algorithm[4];
 	u8	encscheme[2];
 	u8	sigscheme[2];
+	__be32	paramsize;
 	u8	parameters[12]; /*assuming RSA*/
 	__be32	keysize;
 	u8	modulus[256];
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 24314a9..1030f84 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -623,7 +623,14 @@
 
 static int tpm_tis_pnp_resume(struct pnp_dev *dev)
 {
-	return tpm_pm_resume(&dev->dev);
+	struct tpm_chip *chip = pnp_get_drvdata(dev);
+	int ret;
+
+	ret = tpm_pm_resume(&dev->dev);
+	if (!ret)
+		tpm_continue_selftest(chip);
+
+	return ret;
 }
 
 static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 6aa1028..cb19dbc 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -1303,7 +1303,9 @@
 		if (!perm)
 			goto eperm;
 		ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
-		if (!ret)
+		if (ret)
+			ret = -EFAULT;
+		else
 			con_clear_unimap(vc, &ui);
 		break;
 	      }
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d7be69f13..b7dab32 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -194,6 +194,6 @@
 
 module_init(cs5535_mfgpt_init);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index f6677cb..717305d 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -412,18 +412,10 @@
 static int sh_cmt_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
-	int ret;
 
 	p->total_cycles = 0;
 
-	ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
-	if (ret)
-		return ret;
-
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 0;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_cmt_start(p, FLAG_CLOCKSOURCE);
 }
 
 static void sh_cmt_clocksource_disable(struct clocksource *cs)
@@ -450,8 +442,20 @@
 	cs->resume = sh_cmt_clocksource_resume;
 	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	p->rate = clk_get_rate(p->clk) / (p->width == 16) ? 512 : 8;
+	clk_disable(p->clk);
+
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 0;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
+
 	clocksource_register(cs);
+
 	return 0;
 }
 
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 8e44e14..de71590 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@
 static int sh_tmu_clocksource_enable(struct clocksource *cs)
 {
 	struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
-	int ret;
 
-	ret = sh_tmu_enable(p);
-	if (ret)
-		return ret;
-
-	/* TODO: calculate good shift from rate and counter bit width */
-	cs->shift = 10;
-	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
-	return 0;
+	return sh_tmu_enable(p);
 }
 
 static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@
 	cs->disable = sh_tmu_clocksource_disable;
 	cs->mask = CLOCKSOURCE_MASK(32);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	/* clk_get_rate() needs an enabled clock */
+	clk_enable(p->clk);
+	/* channel will be configured at parent clock / 4 */
+	p->rate = clk_get_rate(p->clk) / 4;
+	clk_disable(p->clk);
+	/* TODO: calculate good shift from rate and counter bit width */
+	cs->shift = 10;
+	cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
 	dev_info(&p->pdev->dev, "used as clock source\n");
 	clocksource_register(cs);
 	return 0;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 063b218..938b74e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1077,6 +1077,7 @@
 
 err_unlock_policy:
 	unlock_policy_rwsem_write(cpu);
+	free_cpumask_var(policy->related_cpus);
 err_free_cpumask:
 	free_cpumask_var(policy->cpus);
 err_free_policy:
@@ -1762,17 +1763,8 @@
 			dprintk("governor switch\n");
 
 			/* end old governor */
-			if (data->governor) {
-				/*
-				 * Need to release the rwsem around governor
-				 * stop due to lock dependency between
-				 * cancel_delayed_work_sync and the read lock
-				 * taken in the delayed work handler.
-				 */
-				unlock_policy_rwsem_write(data->cpu);
+			if (data->governor)
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
-				lock_policy_rwsem_write(data->cpu);
-			}
 
 			/* start new governor */
 			data->governor = policy->governor;
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 52ff8aa..1b128702 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -143,7 +143,7 @@
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu())
+	if (nr_iowait_cpu(smp_processor_id()))
 		bucket = BUCKETS/2;
 
 	if (duration < 10)
@@ -175,7 +175,7 @@
 	mult += 2 * get_loadavg();
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu();
+	mult += 10 * nr_iowait_cpu(smp_processor_id());
 
 	return mult;
 }
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 637c105..bd78acf 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1183,10 +1183,14 @@
 				/* Copy part of this segment */
 				ignore = skip - offset;
 				len = miter.length - ignore;
+				if (boffset + len > buflen)
+					len = buflen - boffset;
 				memcpy(buf + boffset, miter.addr + ignore, len);
 			} else {
-				/* Copy all of this segment */
+				/* Copy all of this segment (up to buflen) */
 				len = miter.length;
+				if (boffset + len > buflen)
+					len = buflen - boffset;
 				memcpy(buf + boffset, miter.addr, len);
 			}
 			boffset += len;
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index 5a22ca69..7c37479 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4257,10 +4257,12 @@
 				     struct ppc440spe_adma_chan *chan,
 				     int *initcode)
 {
+	struct of_device *ofdev;
 	struct device_node *np;
 	int ret;
 
-	np = container_of(adev->dev, struct of_device, dev)->node;
+	ofdev = container_of(adev->dev, struct of_device, dev);
+	np = ofdev->dev.of_node;
 	if (adev->id != PPC440SPE_XOR_ID) {
 		adev->err_irq = irq_of_parse_and_map(np, 1);
 		if (adev->err_irq == NO_IRQ) {
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 55c9c59..0d2f9db 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -69,6 +69,9 @@
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_MCE
+	bool
+
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
 	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
@@ -166,6 +169,16 @@
 	  Support for error detection and correction the Intel
 	  i5400 MCH chipset (Seaburg).
 
+config EDAC_I7CORE
+	tristate "Intel i7 Core (Nehalem) processors"
+	depends on EDAC_MM_EDAC && PCI && X86
+	select EDAC_MCE
+	help
+	  Support for error detection and correction the Intel
+	  i7 Core (Nehalem) Integrated Memory Controller that exists on
+	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+	  and Xeon 55xx processors.
+
 config EDAC_I82860
 	tristate "Intel 82860"
 	depends on EDAC_MM_EDAC && PCI && X86_32
@@ -196,7 +209,7 @@
 
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
-	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
+	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
 	help
 	  Support for error detection and correction on the Freescale
 	  MPC8349, MPC8560, MPC8540, MPC8548
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index bc5dc23..ca6b1bb 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,6 +8,7 @@
 
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
+obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
 edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
 edac_core-objs	+= edac_module.o edac_device_sysfs.o
@@ -23,6 +24,7 @@
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index cf17dbb..ac9f798 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1958,20 +1958,20 @@
 	u32 value = 0;
 	int err_sym = 0;
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
+	if (boot_cpu_data.x86 == 0x10) {
 
-	/* F3x180[EccSymbolSize]=1, x8 symbols */
-	if (boot_cpu_data.x86 == 0x10 &&
-	    boot_cpu_data.x86_model > 7 &&
-	    value & BIT(25)) {
-		err_sym = decode_syndrome(syndrome, x8_vectors,
-					  ARRAY_SIZE(x8_vectors), 8);
-		return map_err_sym_to_channel(err_sym, 8);
-	} else {
-		err_sym = decode_syndrome(syndrome, x4_vectors,
-					  ARRAY_SIZE(x4_vectors), 4);
-		return map_err_sym_to_channel(err_sym, 4);
+		amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
+
+		/* F3x180[EccSymbolSize]=1 => x8 symbols */
+		if (boot_cpu_data.x86_model > 7 &&
+		    value & BIT(25)) {
+			err_sym = decode_syndrome(syndrome, x8_vectors,
+						  ARRAY_SIZE(x8_vectors), 8);
+			return map_err_sym_to_channel(err_sym, 8);
+		}
 	}
+	err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), 4);
+	return map_err_sym_to_channel(err_sym, 4);
 }
 
 /*
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 001b2e79..efca934 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -341,12 +341,30 @@
 	struct channel_info *channels;
 };
 
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	struct mcidev_sysfs_attribute *mcidev_attr;	/* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
 /* mcidev_sysfs_attribute structure
  *	used for driver sysfs attributes and in mem_ctl_info
  * 	sysfs top level entries
  */
 struct mcidev_sysfs_attribute {
-        struct attribute attr;
+	/* It should use either attr or grp */
+	struct attribute attr;
+	struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
         ssize_t (*show)(struct mem_ctl_info *,char *);
         ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
 };
@@ -424,6 +442,9 @@
 	/* edac sysfs device control */
 	struct kobject edac_mci_kobj;
 
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
+
 	/* Additional top controller level attributes, but specified
 	 * by the low level driver.
 	 *
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 418b65f1..c200c2f 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -557,6 +557,8 @@
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
 
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
 	if (mcidev_attr->show)
 		return mcidev_attr->show(mem_ctl_info, buffer);
 
@@ -569,6 +571,8 @@
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
 
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
 	if (mcidev_attr->store)
 		return mcidev_attr->store(mem_ctl_info, buffer, count);
 
@@ -726,28 +730,118 @@
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
+#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci)
+
+/* MCI show/store functions for top most object */
+static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr,
+			char *buffer)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->show)
+		return mcidev_attr->show(mem_ctl_info, buffer);
+
+	return -EIO;
+}
+
+static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr,
+			const char *buffer, size_t count)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->store)
+		return mcidev_attr->store(mem_ctl_info, buffer, count);
+
+	return -EIO;
+}
+
+/* No memory to release for this kobj */
+static void edac_inst_grp_release(struct kobject *kobj)
+{
+	struct mcidev_sysfs_group_kobj *grp;
+	struct mem_ctl_info *mci;
+
+	debugf1("%s()\n", __func__);
+
+	grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj);
+	mci = grp->mci;
+
+	kobject_put(&mci->edac_mci_kobj);
+}
+
+/* Intermediate show/store table */
+static struct sysfs_ops inst_grp_ops = {
+	.show = inst_grp_show,
+	.store = inst_grp_store
+};
+
+/* the kobj_type instance for a instance group */
+static struct kobj_type ktype_inst_grp = {
+	.release = edac_inst_grp_release,
+	.sysfs_ops = &inst_grp_ops,
+};
+
+
 /*
  * edac_create_mci_instance_attributes
- *	create MC driver specific attributes at the topmost level
- *	directory of this mci instance.
+ *	create MC driver specific attributes bellow an specified kobj
+ * This routine calls itself recursively, in order to create an entire
+ * object tree.
  */
-static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
+static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj)
 {
 	int err;
-	struct mcidev_sysfs_attribute *sysfs_attrib;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
-	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
+	debugf1("%s()\n", __func__);
 
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		err = sysfs_create_file(&mci->edac_mci_kobj,
-					(struct attribute*) sysfs_attrib);
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			struct mcidev_sysfs_group_kobj *grp_kobj;
+
+			grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL);
+			if (!grp_kobj)
+				return -ENOMEM;
+
+			list_add_tail(&grp_kobj->list, &mci->grp_kobj_list);
+
+			grp_kobj->grp = sysfs_attrib->grp;
+			grp_kobj->mci = mci;
+
+			debugf0("%s() grp %s, mci %p\n", __func__,
+				sysfs_attrib->grp->name, mci);
+
+			err = kobject_init_and_add(&grp_kobj->kobj,
+						&ktype_inst_grp,
+						&mci->edac_mci_kobj,
+						sysfs_attrib->grp->name);
+			if (err)
+				return err;
+
+			err = edac_create_mci_instance_attributes(mci,
+					grp_kobj->grp->mcidev_attr,
+					&grp_kobj->kobj);
+
+			if (err)
+				return err;
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+
+			err = sysfs_create_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
+
 		if (err) {
 			return err;
 		}
-
 		sysfs_attrib++;
 	}
 
@@ -759,21 +853,44 @@
  *	remove MC driver specific attributes at the topmost level
  *	directory of this mci instance.
  */
-static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci)
+static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj, int count)
 {
-	struct mcidev_sysfs_attribute *sysfs_attrib;
+	struct mcidev_sysfs_group_kobj *grp_kobj, *tmp;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
+	debugf1("%s()\n", __func__);
+
+	/*
+	 * loop if there are attributes and until we hit a NULL entry
+	 * Remove first all the atributes
 	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
-
-	/* loop if there are attributes and until we hit a NULL entry */
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		sysfs_remove_file(&mci->edac_mci_kobj,
-					(struct attribute *) sysfs_attrib);
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			list_for_each_entry(grp_kobj, &mci->grp_kobj_list,
+					    list)
+				if (grp_kobj->grp == sysfs_attrib->grp)
+					edac_remove_mci_instance_attributes(mci,
+						    grp_kobj->grp->mcidev_attr,
+						    &grp_kobj->kobj, count + 1);
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+			sysfs_remove_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
 		sysfs_attrib++;
 	}
+
+	/*
+	 * Now that all attributes got removed, it is save to remove all groups
+	 */
+	if (!count)
+		list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list,
+					 list) {
+			debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name);
+			kobject_put(&grp_kobj->kobj);
+		}
 }
 
 
@@ -794,6 +911,8 @@
 
 	debugf0("%s() idx=%d\n", __func__, mci->mc_idx);
 
+	INIT_LIST_HEAD(&mci->grp_kobj_list);
+
 	/* create a symlink for the device */
 	err = sysfs_create_link(kobj_mci, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
@@ -806,7 +925,9 @@
 	 * then create them now for the driver.
 	 */
 	if (mci->mc_driver_sysfs_attributes) {
-		err = edac_create_mci_instance_attributes(mci);
+		err = edac_create_mci_instance_attributes(mci,
+					mci->mc_driver_sysfs_attributes,
+					&mci->edac_mci_kobj);
 		if (err) {
 			debugf1("%s() failure to create mci attributes\n",
 				__func__);
@@ -841,7 +962,8 @@
 	}
 
 	/* remove the mci instance's attributes, if any */
-	edac_remove_mci_instance_attributes(mci);
+	edac_remove_mci_instance_attributes(mci,
+		mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0);
 
 	/* remove the symlink */
 	sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK);
@@ -875,8 +997,9 @@
 	debugf0("%s()  remove_mci_instance\n", __func__);
 
 	/* remove this mci instance's attribtes */
-	edac_remove_mci_instance_attributes(mci);
-
+	edac_remove_mci_instance_attributes(mci,
+					    mci->mc_driver_sysfs_attributes,
+					    &mci->edac_mci_kobj, 0);
 	debugf0("%s()  unregister this mci kobj\n", __func__);
 
 	/* unregister this instance's kobject */
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
new file mode 100644
index 0000000..9ccdc5b
--- /dev/null
+++ b/drivers/edac/edac_mce.c
@@ -0,0 +1,61 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#include <linux/module.h>
+#include <linux/edac_mce.h>
+#include <asm/mce.h>
+
+int edac_mce_enabled;
+EXPORT_SYMBOL_GPL(edac_mce_enabled);
+
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(edac_mce_list);
+static DEFINE_MUTEX(edac_mce_lock);
+
+int edac_mce_register(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_add_tail(&edac_mce->list, &edac_mce_list);
+	mutex_unlock(&edac_mce_lock);
+	return 0;
+}
+EXPORT_SYMBOL(edac_mce_register);
+
+void edac_mce_unregister(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_del(&edac_mce->list);
+	mutex_unlock(&edac_mce_lock);
+}
+EXPORT_SYMBOL(edac_mce_unregister);
+
+int edac_mce_parse(struct mce *mce)
+{
+	struct edac_mce *edac_mce;
+
+	list_for_each_entry(edac_mce, &edac_mce_list, list) {
+		if (edac_mce->check_error(edac_mce->priv, mce))
+			return 1;
+	}
+
+	/* Nobody queued the error */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(edac_mce_parse);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
new file mode 100644
index 0000000..e0187d1
--- /dev/null
+++ b/drivers/edac/i7core_edac.c
@@ -0,0 +1,2105 @@
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ *	http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "edac_core.h"
+
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES	2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION    " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR      "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...)			\
+	edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+	/* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL	0x90
+
+	/* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL	0x48
+#define MC_STATUS	0x4c
+#define MC_MAX_DOD	0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1	0x60
+  #define DIMM2_COR_ERR(r)			((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0	0x64
+  #define DIMM1_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+  #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0	0x80
+#define MC_COR_ECC_CNT_1	0x84
+#define MC_COR_ECC_CNT_2	0x88
+#define MC_COR_ECC_CNT_3	0x8c
+#define MC_COR_ECC_CNT_4	0x90
+#define MC_COR_ECC_CNT_5	0x94
+
+#define DIMM_TOP_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r)			((r) & 0x7fff)
+
+
+	/* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+  #define THREE_DIMMS_PRESENT		(1 << 24)
+  #define SINGLE_QUAD_RANK_PRESENT	(1 << 23)
+  #define QUAD_RANK_PRESENT		(1 << 22)
+  #define REGISTERED_DIMM		(1 << 15)
+
+#define MC_CHANNEL_MAPPER	0x60
+  #define RDLCH(r, ch)		((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+  #define WRLCH(r, ch)		((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+  #define RANK_PRESENT_MASK		0xffff
+
+#define MC_CHANNEL_ADDR_MATCH	0xf0
+#define MC_CHANNEL_ERROR_MASK	0xf8
+#define MC_CHANNEL_ERROR_INJECT	0xfc
+  #define INJECT_ADDR_PARITY	0x10
+  #define INJECT_ECC		0x08
+  #define MASK_CACHELINE	0x06
+  #define MASK_FULL_CACHELINE	0x06
+  #define MASK_MSB32_CACHELINE	0x04
+  #define MASK_LSB32_CACHELINE	0x02
+  #define NO_MASK_CACHELINE	0x00
+  #define REPEAT_EN		0x01
+
+	/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0		0x48
+#define MC_DOD_CH_DIMM1		0x4c
+#define MC_DOD_CH_DIMM2		0x50
+  #define RANKOFFSET_MASK	((1 << 12) | (1 << 11) | (1 << 10))
+  #define RANKOFFSET(x)		((x & RANKOFFSET_MASK) >> 10)
+  #define DIMM_PRESENT_MASK	(1 << 9)
+  #define DIMM_PRESENT(x)	(((x) & DIMM_PRESENT_MASK) >> 9)
+  #define MC_DOD_NUMBANK_MASK		((1 << 8) | (1 << 7))
+  #define MC_DOD_NUMBANK(x)		(((x) & MC_DOD_NUMBANK_MASK) >> 7)
+  #define MC_DOD_NUMRANK_MASK		((1 << 6) | (1 << 5))
+  #define MC_DOD_NUMRANK(x)		(((x) & MC_DOD_NUMRANK_MASK) >> 5)
+  #define MC_DOD_NUMROW_MASK		((1 << 4) | (1 << 3) | (1 << 2))
+  #define MC_DOD_NUMROW(x)		(((x) & MC_DOD_NUMROW_MASK) >> 2)
+  #define MC_DOD_NUMCOL_MASK		3
+  #define MC_DOD_NUMCOL(x)		((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT		0x7c
+
+#define MC_SAG_CH_0	0x80
+#define MC_SAG_CH_1	0x84
+#define MC_SAG_CH_2	0x88
+#define MC_SAG_CH_3	0x8c
+#define MC_SAG_CH_4	0x90
+#define MC_SAG_CH_5	0x94
+#define MC_SAG_CH_6	0x98
+#define MC_SAG_CH_7	0x9c
+
+#define MC_RIR_LIMIT_CH_0	0x40
+#define MC_RIR_LIMIT_CH_1	0x44
+#define MC_RIR_LIMIT_CH_2	0x48
+#define MC_RIR_LIMIT_CH_3	0x4C
+#define MC_RIR_LIMIT_CH_4	0x50
+#define MC_RIR_LIMIT_CH_5	0x54
+#define MC_RIR_LIMIT_CH_6	0x58
+#define MC_RIR_LIMIT_CH_7	0x5C
+#define MC_RIR_LIMIT_MASK	((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH		0x80
+  #define MC_RIR_WAY_OFFSET_MASK	(((1 << 14) - 1) & ~0x7)
+  #define MC_RIR_WAY_RANK_MASK		0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3		/* Max DIMMS per channel */
+#define MAX_MCR_FUNC  4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+	u32	mc_control;
+	u32	mc_status;
+	u32	max_dod;
+	u32	ch_map;
+};
+
+
+struct i7core_inject {
+	int	enable;
+
+	u32	section;
+	u32	type;
+	u32	eccmask;
+
+	/* Error address mask */
+	int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+	u32		ranks;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev;
+	int			func;
+	int 			dev_id;
+	int			optional;
+};
+
+struct pci_id_table {
+	struct pci_id_descr	*descr;
+	int			n_devs;
+};
+
+struct i7core_dev {
+	struct list_head	list;
+	u8			socket;
+	struct pci_dev		**pdev;
+	int			n_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct i7core_pvt {
+	struct pci_dev	*pci_noncore;
+	struct pci_dev	*pci_mcr[MAX_MCR_FUNC + 1];
+	struct pci_dev	*pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+	struct i7core_dev *i7core_dev;
+
+	struct i7core_info	info;
+	struct i7core_inject	inject;
+	struct i7core_channel	channel[NUM_CHANS];
+
+	int		channels; /* Number of active channels */
+
+	int		ce_count_available;
+	int 		csrow_map[NUM_CHANS][MAX_DIMMS];
+
+			/* ECC corrected errors counts per udimm */
+	unsigned long	udimm_ce_count[MAX_DIMMS];
+	int		udimm_last_ce_count[MAX_DIMMS];
+			/* ECC corrected errors counts per rdimm */
+	unsigned long	rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+	int		rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+	unsigned int	is_registered;
+
+	/* mcelog glue */
+	struct edac_mce		edac_mce;
+
+	/* Fifo double buffers */
+	struct mce		mce_entry[MCE_LOG_LEN];
+	struct mce		mce_outentry[MCE_LOG_LEN];
+
+	/* Fifo in/out counters */
+	unsigned		mce_in, mce_out;
+
+	/* Count indicator to show errors not got */
+	unsigned		mce_overrun;
+};
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
+#define PCI_DESCR(device, function, device_id)	\
+	.dev = (device),			\
+	.func = (function),			\
+	.dev_id = (device_id)
+
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
+
+		/* Generic Non-core registers */
+	/*
+	 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+	 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+	 * the probing code needs to test for the other address in case of
+	 * failure of this one
+	 */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+	{ PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR)         },
+	{ PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD)      },
+	{ PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST)     },
+
+	{ PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+	{ PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+	{ PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+	{ PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC)   },
+
+	{ PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+	{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+	{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+	{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
+
+	/*
+	 * This is the PCI device has an alternate address on some
+	 * processors like Core i7 860
+	 */
+	{ PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
+
+		/* Generic Non-core registers */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+};
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+	{0,}			/* 0 terminated list. */
+};
+
+static struct edac_pci_ctl_info *i7core_pci;
+
+/****************************************************************************
+			Anciliary status routines
+ ****************************************************************************/
+
+	/* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch)	((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt)		((pvt)->info.mc_control & (1 << 1))
+
+	/* MC_STATUS bits */
+#define ECC_ENABLED(pvt)	((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch)	((pvt)->info.mc_status & (1 << ch))
+
+	/* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+	return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+	static int ranks[4] = { 1, 2, 4, -EINVAL };
+
+	return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+	static int banks[4] = { 4, 8, 16, -EINVAL };
+
+	return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+	static int rows[8] = {
+		1 << 12, 1 << 13, 1 << 14, 1 << 15,
+		1 << 16, -EINVAL, -EINVAL, -EINVAL,
+	};
+
+	return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+	static int cols[8] = {
+		1 << 10, 1 << 11, 1 << 12, -EINVAL,
+	};
+	return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+	struct i7core_dev *i7core_dev;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		if (i7core_dev->socket == socket)
+			return i7core_dev;
+	}
+
+	return NULL;
+}
+
+/****************************************************************************
+			Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+					  unsigned func)
+{
+	struct i7core_dev *i7core_dev = get_i7core_dev(socket);
+	int i;
+
+	if (!i7core_dev)
+		return NULL;
+
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		if (!i7core_dev->pdev[i])
+			continue;
+
+		if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+		    PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+			return i7core_dev->pdev[i];
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket:	Quick Path Interconnect socket
+ * @channels:	Number of channels that will be returned
+ * @csrows:	Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+				      unsigned *csrows)
+{
+	struct pci_dev *pdev = NULL;
+	int i, j;
+	u32 status, control;
+
+	*channels = 0;
+	*csrows = 0;
+
+	pdev = get_pdev_slot_func(socket, 3, 0);
+	if (!pdev) {
+		i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+			      socket);
+		return -ENODEV;
+	}
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_STATUS, &status);
+	pci_read_config_dword(pdev, MC_CONTROL, &control);
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 dimm_dod[3];
+		/* Check if the channel is active */
+		if (!(control & (1 << (8 + i))))
+			continue;
+
+		/* Check if the channel is disabled */
+		if (status & (1 << i))
+			continue;
+
+		pdev = get_pdev_slot_func(socket, i + 4, 1);
+		if (!pdev) {
+			i7core_printk(KERN_ERR, "Couldn't find socket %d "
+						"fn %d.%d!!!\n",
+						socket, i + 4, 1);
+			return -ENODEV;
+		}
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		(*channels)++;
+
+		for (j = 0; j < 3; j++) {
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+			(*csrows)++;
+		}
+	}
+
+	debugf0("Number of active channels on socket %d: %d\n",
+		socket, *channels);
+
+	return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct csrow_info *csr;
+	struct pci_dev *pdev;
+	int i, j;
+	unsigned long last_page = 0;
+	enum edac_type mode;
+	enum mem_type mtype;
+
+	/* Get data from the MC register, function 0 */
+	pdev = pvt->pci_mcr[0];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+	pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+	pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+	pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+	debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+		pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
+		pvt->info.max_dod, pvt->info.ch_map);
+
+	if (ECC_ENABLED(pvt)) {
+		debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+		if (ECCx8(pvt))
+			mode = EDAC_S8ECD8ED;
+		else
+			mode = EDAC_S4ECD4ED;
+	} else {
+		debugf0("ECC disabled\n");
+		mode = EDAC_NONE;
+	}
+
+	/* FIXME: need to handle the error codes */
+	debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+		"x%x x 0x%x\n",
+		numdimms(pvt->info.max_dod),
+		numrank(pvt->info.max_dod >> 2),
+		numbank(pvt->info.max_dod >> 4),
+		numrow(pvt->info.max_dod >> 6),
+		numcol(pvt->info.max_dod >> 9));
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 data, dimm_dod[3], value[8];
+
+		if (!pvt->pci_ch[i][0])
+			continue;
+
+		if (!CH_ACTIVE(pvt, i)) {
+			debugf0("Channel %i is not active\n", i);
+			continue;
+		}
+		if (CH_DISABLED(pvt, i)) {
+			debugf0("Channel %i is disabled\n", i);
+			continue;
+		}
+
+		/* Devices 4-6 function 0 */
+		pci_read_config_dword(pvt->pci_ch[i][0],
+				MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+		pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+						4 : 2;
+
+		if (data & REGISTERED_DIMM)
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+#if 0
+		if (data & THREE_DIMMS_PRESENT)
+			pvt->channel[i].dimms = 3;
+		else if (data & SINGLE_QUAD_RANK_PRESENT)
+			pvt->channel[i].dimms = 1;
+		else
+			pvt->channel[i].dimms = 2;
+#endif
+
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
+			"%d ranks, %cDIMMs\n",
+			i,
+			RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+			data,
+			pvt->channel[i].ranks,
+			(data & REGISTERED_DIMM) ? 'R' : 'U');
+
+		for (j = 0; j < 3; j++) {
+			u32 banks, ranks, rows, cols;
+			u32 size, npages;
+
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+
+			banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+			ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+			rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+			cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+			/* DDR3 has 8 I/O banks */
+			size = (rows * cols * banks * ranks) >> (20 - 3);
+
+			pvt->channel[i].dimms++;
+
+			debugf0("\tdimm %d %d Mb offset: %x, "
+				"bank: %d, rank: %d, row: %#x, col: %#x\n",
+				j, size,
+				RANKOFFSET(dimm_dod[j]),
+				banks, ranks, rows, cols);
+
+#if PAGE_SHIFT > 20
+			npages = size >> (PAGE_SHIFT - 20);
+#else
+			npages = size << (20 - PAGE_SHIFT);
+#endif
+
+			csr = &mci->csrows[*csrow];
+			csr->first_page = last_page + 1;
+			last_page += npages;
+			csr->last_page = last_page;
+			csr->nr_pages = npages;
+
+			csr->page_mask = 0;
+			csr->grain = 8;
+			csr->csrow_idx = *csrow;
+			csr->nr_channels = 1;
+
+			csr->channels[0].chan_idx = i;
+			csr->channels[0].ce_count = 0;
+
+			pvt->csrow_map[i][j] = *csrow;
+
+			switch (banks) {
+			case 4:
+				csr->dtype = DEV_X4;
+				break;
+			case 8:
+				csr->dtype = DEV_X8;
+				break;
+			case 16:
+				csr->dtype = DEV_X16;
+				break;
+			default:
+				csr->dtype = DEV_UNKNOWN;
+			}
+
+			csr->edac_mode = mode;
+			csr->mtype = mtype;
+
+			(*csrow)++;
+		}
+
+		pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+		pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+		pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+		pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+		pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+		pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+		pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+		pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+		debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+		for (j = 0; j < 8; j++)
+			debugf1("\t\t%#x\t%#x\t%#x\n",
+				(value[j] >> 27) & 0x1,
+				(value[j] >> 24) & 0x7,
+				(value[j] && ((1 << 24) - 1)));
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+			Error insertion routines
+ ****************************************************************************/
+
+/* The i7core has independent error injection features per channel.
+   However, to have a simpler code, we don't allow enabling error injection
+   on more than one channel.
+   Also, since a change at an inject parameter will be applied only at enable,
+   we're disabling error injection on all write calls to the sysfs nodes that
+   controls the error code injection.
+ */
+static int disable_inject(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	pvt->inject.enable = 0;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return -ENODEV;
+
+	pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+				MC_CHANNEL_ERROR_INJECT, 0);
+
+	return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - refers to the lower 32-byte half cacheline
+ *	bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
+					   const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 3))
+		return -EIO;
+
+	pvt->inject.section = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - repeat enable - Enable error repetition
+ *	bit 1 - inject ECC error
+ *	bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 7))
+		return -EIO;
+
+	pvt->inject.type = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if (rc < 0)
+		return -EIO;
+
+	pvt->inject.eccmask = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit)			\
+static ssize_t i7core_inject_store_##param(			\
+		struct mem_ctl_info *mci,			\
+		const char *data, size_t count)			\
+{								\
+	struct i7core_pvt *pvt;					\
+	long value;						\
+	int rc;							\
+								\
+	debugf1("%s()\n", __func__);				\
+	pvt = mci->pvt_info;					\
+								\
+	if (pvt->inject.enable)					\
+		disable_inject(mci);				\
+								\
+	if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+		value = -1;					\
+	else {							\
+		rc = strict_strtoul(data, 10, &value);		\
+		if ((rc < 0) || (value >= limit))		\
+			return -EIO;				\
+	}							\
+								\
+	pvt->inject.param = value;				\
+								\
+	return count;						\
+}								\
+								\
+static ssize_t i7core_inject_show_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt;					\
+								\
+	pvt = mci->pvt_info;					\
+	debugf1("%s() pvt=%p\n", __func__, pvt);		\
+	if (pvt->inject.param < 0)				\
+		return sprintf(data, "any\n");			\
+	else							\
+		return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param)					\
+	{							\
+		.attr = {					\
+			.name = #param,				\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_inject_show_##param,		\
+		.store = i7core_inject_store_##param,		\
+	}
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+	u32 read;
+	int count;
+
+	debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val);
+
+	for (count = 0; count < 10; count++) {
+		if (count)
+			msleep(100);
+		pci_write_config_dword(dev, where, val);
+		pci_read_config_dword(dev, where, &read);
+
+		if (read == val)
+			return 0;
+	}
+
+	i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+		"write=%08x. Read=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val, read);
+
+	return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ *    is reliable enough to check if the MC is using the
+ *    three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
+				       const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+	u64 mask = 0;
+	int  rc;
+	long enable;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	rc = strict_strtoul(data, 10, &enable);
+	if ((rc < 0))
+		return 0;
+
+	if (enable) {
+		pvt->inject.enable = 1;
+	} else {
+		disable_inject(mci);
+		return count;
+	}
+
+	/* Sets pvt->inject.dimm mask */
+	if (pvt->inject.dimm < 0)
+		mask |= 1LL << 41;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.dimm & 0x3LL) << 35;
+		else
+			mask |= (pvt->inject.dimm & 0x1LL) << 36;
+	}
+
+	/* Sets pvt->inject.rank mask */
+	if (pvt->inject.rank < 0)
+		mask |= 1LL << 40;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.rank & 0x1LL) << 34;
+		else
+			mask |= (pvt->inject.rank & 0x3LL) << 34;
+	}
+
+	/* Sets pvt->inject.bank mask */
+	if (pvt->inject.bank < 0)
+		mask |= 1LL << 39;
+	else
+		mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+	/* Sets pvt->inject.page mask */
+	if (pvt->inject.page < 0)
+		mask |= 1LL << 38;
+	else
+		mask |= (pvt->inject.page & 0xffff) << 14;
+
+	/* Sets pvt->inject.column mask */
+	if (pvt->inject.col < 0)
+		mask |= 1LL << 37;
+	else
+		mask |= (pvt->inject.col & 0x3fff);
+
+	/*
+	 * bit    0: REPEAT_EN
+	 * bits 1-2: MASK_HALF_CACHELINE
+	 * bit    3: INJECT_ECC
+	 * bit    4: INJECT_ADDR_PARITY
+	 */
+
+	injectmask = (pvt->inject.type & 1) |
+		     (pvt->inject.section & 0x3) << 1 |
+		     (pvt->inject.type & 0x6) << (3 - 1);
+
+	/* Unlock writes to registers - this register is write only */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 0x2);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH, mask);
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, injectmask);
+
+	/*
+	 * This is something undocumented, based on my tests
+	 * Without writing 8 to this register, errors aren't injected. Not sure
+	 * why.
+	 */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 8);
+
+	debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
+		" inject 0x%08x\n",
+		mask, pvt->inject.eccmask, injectmask);
+
+
+	return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
+					char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+	debugf0("Inject error read: 0x%018x\n", injectmask);
+
+	if (injectmask & 0x0c)
+		pvt->inject.enable = 1;
+
+	return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param)					\
+static ssize_t i7core_show_counter_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt = mci->pvt_info;			\
+								\
+	debugf1("%s() \n", __func__);				\
+	if (!pvt->ce_count_available || (pvt->is_registered))	\
+		return sprintf(data, "data unavailable\n");	\
+	return sprintf(data, "%lu\n",				\
+			pvt->udimm_ce_count[param]);		\
+}
+
+#define ATTR_COUNTER(param)					\
+	{							\
+		.attr = {					\
+			.name = __stringify(udimm##param),	\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_show_counter_##param		\
+	}
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+/*
+ * Sysfs struct
+ */
+
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+	ATTR_ADDR_MATCH(channel),
+	ATTR_ADDR_MATCH(dimm),
+	ATTR_ADDR_MATCH(rank),
+	ATTR_ADDR_MATCH(bank),
+	ATTR_ADDR_MATCH(page),
+	ATTR_ADDR_MATCH(col),
+	{ .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+	.name  = "inject_addrmatch",
+	.mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+	ATTR_COUNTER(0),
+	ATTR_COUNTER(1),
+	ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+	.name  = "all_channel_counts",
+	.mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
+	{
+		.attr = {
+			.name = "inject_section",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_section_show,
+		.store = i7core_inject_section_store,
+	}, {
+		.attr = {
+			.name = "inject_type",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_type_show,
+		.store = i7core_inject_type_store,
+	}, {
+		.attr = {
+			.name = "inject_eccmask",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_eccmask_show,
+		.store = i7core_inject_eccmask_store,
+	}, {
+		.grp = &i7core_inject_addrmatch,
+	}, {
+		.attr = {
+			.name = "inject_enable",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_enable_show,
+		.store = i7core_inject_enable_store,
+	},
+	{ .attr = { .name = NULL } },	/* Reserved for udimm counters */
+	{ .attr = { .name = NULL } }
+};
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	i7core_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+	int i;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		struct pci_dev *pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+		debugf0("Removing dev %02x:%02x.%d\n",
+			pdev->bus->number,
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+	kfree(i7core_dev->pdev);
+	list_del(&i7core_dev->list);
+	kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+	struct i7core_dev *i7core_dev, *tmp;
+
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+		i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+	struct pci_dev *pdev = NULL;
+	int i;
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+	 * aren't announced by acpi. So, we need to use a legacy scan probing
+	 * to detect them
+	 */
+	while (table && table->descr) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+		if (unlikely(!pdev)) {
+			for (i = 0; i < MAX_SOCKET_BUSES; i++)
+				pcibios_scan_specific_bus(255-i);
+		}
+		pci_dev_put(pdev);
+		table++;
+	}
+}
+
+static unsigned i7core_pci_lastbus(void)
+{
+	int last_bus = 0, bus;
+	struct pci_bus *b = NULL;
+
+	while ((b = pci_find_next_bus(b)) != NULL) {
+		bus = b->number;
+		debugf0("Found bus %d\n", bus);
+		if (bus > last_bus)
+			last_bus = bus;
+	}
+
+	debugf0("Last bus %d\n", last_bus);
+
+	return last_bus;
+}
+
+/*
+ *	i7core_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+			 struct pci_id_descr *dev_descr, unsigned n_devs,
+			 unsigned last_bus)
+{
+	struct i7core_dev *i7core_dev;
+
+	struct pci_dev *pdev = NULL;
+	u8 bus = 0;
+	u8 socket = 0;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+	 * to probe for the alternate address in case of failure
+	 */
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+				      *prev);
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		if (devno == 0)
+			return -ENODEV;
+
+		i7core_printk(KERN_INFO,
+			"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+			dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	bus = pdev->bus->number;
+
+	socket = last_bus - bus;
+
+	i7core_dev = get_i7core_dev(socket);
+	if (!i7core_dev) {
+		i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+		if (!i7core_dev)
+			return -ENOMEM;
+		i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+					   GFP_KERNEL);
+		if (!i7core_dev->pdev) {
+			kfree(i7core_dev);
+			return -ENOMEM;
+		}
+		i7core_dev->socket = socket;
+		i7core_dev->n_devs = n_devs;
+		list_add_tail(&i7core_dev->list, &i7core_edac_list);
+	}
+
+	if (i7core_dev->pdev[devno]) {
+		i7core_printk(KERN_ERR,
+			"Duplicated device for "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	i7core_dev->pdev[devno] = pdev;
+
+	/* Sanity check */
+	if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+			PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+		i7core_printk(KERN_ERR,
+			"Device PCI ID %04x:%04x "
+			"has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+			bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			bus, dev_descr->dev, dev_descr->func);
+		return -ENODEV;
+	}
+
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		i7core_printk(KERN_ERR,
+			"Couldn't enable "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+		socket, bus, dev_descr->dev,
+		dev_descr->func,
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+static int i7core_get_devices(struct pci_id_table *table)
+{
+	int i, rc, last_bus;
+	struct pci_dev *pdev = NULL;
+	struct pci_id_descr *dev_descr;
+
+	last_bus = i7core_pci_lastbus();
+
+	while (table && table->descr) {
+		dev_descr = table->descr;
+		for (i = 0; i < table->n_devs; i++) {
+			pdev = NULL;
+			do {
+				rc = i7core_get_onedevice(&pdev, i,
+							  &dev_descr[i],
+							  table->n_devs,
+							  last_bus);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs;
+						break;
+					}
+					i7core_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev);
+		}
+		table++;
+	}
+
+	return 0;
+	return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+			 struct i7core_dev *i7core_dev)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, func, slot;
+
+	/* Associates i7core_dev and mci for future usage */
+	pvt->i7core_dev = i7core_dev;
+	i7core_dev->mci = mci;
+
+	pvt->is_registered = 0;
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		func = PCI_FUNC(pdev->devfn);
+		slot = PCI_SLOT(pdev->devfn);
+		if (slot == 3) {
+			if (unlikely(func > MAX_MCR_FUNC))
+				goto error;
+			pvt->pci_mcr[func] = pdev;
+		} else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+			if (unlikely(func > MAX_CHAN_FUNC))
+				goto error;
+			pvt->pci_ch[slot - 4][func] = pdev;
+		} else if (!slot && !func)
+			pvt->pci_noncore = pdev;
+		else
+			goto error;
+
+		debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			pdev, i7core_dev->socket);
+
+		if (PCI_SLOT(pdev->devfn) == 3 &&
+			PCI_FUNC(pdev->devfn) == 2)
+			pvt->is_registered = 1;
+	}
+
+	/*
+	 * Add extra nodes to count errors on udimm
+	 * For registered memory, this is not needed, since the counters
+	 * are already displayed at the standard locations
+	 */
+	if (!pvt->is_registered)
+		i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+			&i7core_udimm_counters;
+
+	return 0;
+
+error:
+	i7core_printk(KERN_ERR, "Device %d, function %d "
+		      "is out of the expected range\n",
+		      slot, func);
+	return -EINVAL;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+					 int chan, int dimm, int add)
+{
+	char *msg;
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int row = pvt->csrow_map[chan][dimm], i;
+
+	for (i = 0; i < add; i++) {
+		msg = kasprintf(GFP_KERNEL, "Corrected error "
+				"(Socket=%d channel=%d dimm=%d)",
+				pvt->i7core_dev->socket, chan, dimm);
+
+		edac_mc_handle_fbd_ce(mci, row, 0, msg);
+		kfree (msg);
+	}
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+			int chan, int new0, int new1, int new2)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int add0 = 0, add1 = 0, add2 = 0;
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+
+		add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+		add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+		add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->rdimm_ce_count[chan][2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->rdimm_ce_count[chan][1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->rdimm_ce_count[chan][0] += add0;
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->rdimm_last_ce_count[chan][2] = new2;
+	pvt->rdimm_last_ce_count[chan][1] = new1;
+	pvt->rdimm_last_ce_count[chan][0] = new0;
+
+	/*updated the edac core */
+	if (add0 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 0, add0);
+	if (add1 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 1, add1);
+	if (add2 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv[3][2];
+	int i, new0, new1, new2;
+
+	/*Read DEV 3: FUN 2:  MC_COR_ECC_CNT regs directly*/
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+								&rcv[0][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+								&rcv[0][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+								&rcv[1][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+								&rcv[1][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+								&rcv[2][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+								&rcv[2][1]);
+	for (i = 0 ; i < 3; i++) {
+		debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+			(i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+		/*if the channel has 3 dimms*/
+		if (pvt->channel[i].dimms > 2) {
+			new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+			new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+		} else {
+			new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+					DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+					DIMM_BOT_COR_ERR(rcv[i][1]);
+			new2 = 0;
+		}
+
+		i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+	}
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv1, rcv0;
+	int new0, new1, new2;
+
+	if (!pvt->pci_mcr[4]) {
+		debugf0("%s MCR registers not found\n", __func__);
+		return;
+	}
+
+	/* Corrected test errors */
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+	/* Store the new values */
+	new2 = DIMM2_COR_ERR(rcv1);
+	new1 = DIMM1_COR_ERR(rcv0);
+	new0 = DIMM0_COR_ERR(rcv0);
+
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+		int add0, add1, add2;
+
+		add2 = new2 - pvt->udimm_last_ce_count[2];
+		add1 = new1 - pvt->udimm_last_ce_count[1];
+		add0 = new0 - pvt->udimm_last_ce_count[0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->udimm_ce_count[2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->udimm_ce_count[1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->udimm_ce_count[0] += add0;
+
+		if (add0 | add1 | add2)
+			i7core_printk(KERN_ERR, "New Corrected error(s): "
+				      "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+				      add0, add1, add2);
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->udimm_last_ce_count[2] = new2;
+	pvt->udimm_last_ce_count[1] = new1;
+	pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ *     struct mce field	MCA Register
+ *     m->status	MSR_IA32_MC8_STATUS
+ *     m->addr		MSR_IA32_MC8_ADDR
+ *     m->misc		MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+				    struct mce *m)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	char *type, *optype, *err, *msg;
+	unsigned long error = m->status & 0x1ff0000l;
+	u32 optypenum = (m->status >> 4) & 0x07;
+	u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+	u32 dimm = (m->misc >> 16) & 0x3;
+	u32 channel = (m->misc >> 18) & 0x3;
+	u32 syndrome = m->misc >> 32;
+	u32 errnum = find_first_bit(&error, 32);
+	int csrow;
+
+	if (m->mcgstatus & 1)
+		type = "FATAL";
+	else
+		type = "NON_FATAL";
+
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request";
+		break;
+	case 1:
+		optype = "read error";
+		break;
+	case 2:
+		optype = "write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
+	}
+
+	switch (errnum) {
+	case 16:
+		err = "read ECC error";
+		break;
+	case 17:
+		err = "RAS ECC error";
+		break;
+	case 18:
+		err = "write parity error";
+		break;
+	case 19:
+		err = "redundacy loss";
+		break;
+	case 20:
+		err = "reserved";
+		break;
+	case 21:
+		err = "memory range error";
+		break;
+	case 22:
+		err = "RTID out of range";
+		break;
+	case 23:
+		err = "address parity error";
+		break;
+	case 24:
+		err = "byte enable parity error";
+		break;
+	default:
+		err = "unknown";
+	}
+
+	/* FIXME: should convert addr into bank and rank information */
+	msg = kasprintf(GFP_ATOMIC,
+		"%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+		"syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+		type, (long long) m->addr, m->cpu, dimm, channel,
+		syndrome, core_err_cnt, (long long)m->status,
+		(long long)m->misc, optype, err);
+
+	debugf0("%s", msg);
+
+	csrow = pvt->csrow_map[channel][dimm];
+
+	/* Call the helper to output message */
+	if (m->mcgstatus & 1)
+		edac_mc_handle_fbd_ue(mci, csrow, 0,
+				0 /* FIXME: should be channel here */, msg);
+	else if (!pvt->is_registered)
+		edac_mc_handle_fbd_ce(mci, csrow,
+				0 /* FIXME: should be channel here */, msg);
+
+	kfree(msg);
+}
+
+/*
+ *	i7core_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int i;
+	unsigned count = 0;
+	struct mce *m;
+
+	/*
+	 * MCE first step: Copy all mce errors into a temporary buffer
+	 * We use a double buffering here, to reduce the risk of
+	 * loosing an error.
+	 */
+	smp_rmb();
+	count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+		% MCE_LOG_LEN;
+	if (!count)
+		goto check_ce_error;
+
+	m = pvt->mce_outentry;
+	if (pvt->mce_in + count > MCE_LOG_LEN) {
+		unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+		memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+		smp_wmb();
+		pvt->mce_in = 0;
+		count -= l;
+		m += l;
+	}
+	memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+	smp_wmb();
+	pvt->mce_in += count;
+
+	smp_rmb();
+	if (pvt->mce_overrun) {
+		i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+			      pvt->mce_overrun);
+		smp_wmb();
+		pvt->mce_overrun = 0;
+	}
+
+	/*
+	 * MCE second step: parse errors and display
+	 */
+	for (i = 0; i < count; i++)
+		i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+	/*
+	 * Now, let's increment CE error counts
+	 */
+check_ce_error:
+	if (!pvt->is_registered)
+		i7core_udimm_check_mc_ecc_err(mci);
+	else
+		i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * i7core_mce_check_error	Replicates mcelog routine to get errors
+ *				This routine simply queues mcelog errors, and
+ *				return. The error itself should be handled later
+ *				by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int i7core_mce_check_error(void *priv, struct mce *mce)
+{
+	struct mem_ctl_info *mci = priv;
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller
+	 */
+	if (((mce->status & 0xffff) >> 7) != 1)
+		return 0;
+
+	/* Bank 8 registers are the only ones that we know how to handle */
+	if (mce->bank != 8)
+		return 0;
+
+#ifdef CONFIG_SMP
+	/* Only handle if it is the right mc controller */
+	if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+		return 0;
+#endif
+
+	smp_rmb();
+	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+		smp_wmb();
+		pvt->mce_overrun++;
+		return 0;
+	}
+
+	/* Copy memory error at the ringbuffer */
+	memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+	smp_wmb();
+	pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+	/* Handle fatal errors immediately */
+	if (mce->mcgstatus & 1)
+		i7core_check_error(mci);
+
+	/* Advice mcelog that the error were handled */
+	return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+			       int num_channels, int num_csrows)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+	int csrow = 0;
+	int rc;
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+			    i7core_dev->socket);
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+	/* record ptr to the generic device */
+	mci->dev = &i7core_dev->pdev[0]->dev;
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/*
+	 * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+	 * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+	 * memory channels
+	 */
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7core_edac.c";
+	mci->mod_ver = I7CORE_REVISION;
+	mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+				  i7core_dev->socket);
+	mci->dev_name = pci_name(i7core_dev->pdev[0]);
+	mci->ctl_page_to_phys = NULL;
+	mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7core_check_error;
+
+	/* Store pci devices at mci for faster access */
+	rc = mci_bind_devs(mci, i7core_dev);
+	if (unlikely(rc < 0))
+		goto fail;
+
+	/* Get dimm basic config */
+	get_dimm_config(mci, &csrow);
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+						 EDAC_MOD_STR);
+	if (unlikely(!i7core_pci)) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* Default error mask is any memory */
+	pvt->inject.channel = 0;
+	pvt->inject.dimm = -1;
+	pvt->inject.rank = -1;
+	pvt->inject.bank = -1;
+	pvt->inject.page = -1;
+	pvt->inject.col = -1;
+
+	/* Registers on edac_mce in order to receive memory errors */
+	pvt->edac_mce.priv = mci;
+	pvt->edac_mce.check_error = i7core_mce_check_error;
+
+	rc = edac_mce_register(&pvt->edac_mce);
+	if (unlikely(rc < 0)) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mce_register()\n", __func__);
+	}
+
+fail:
+	if (rc < 0)
+		edac_mc_free(mci);
+	return rc;
+}
+
+/*
+ *	i7core_probe	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+
+static int probed = 0;
+
+static int __devinit i7core_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int rc;
+	struct i7core_dev *i7core_dev;
+
+	/* get the pci devices we want to reserve for our use */
+	mutex_lock(&i7core_edac_lock);
+
+	/*
+	 * All memory controllers are allocated at the first pass.
+	 */
+	if (unlikely(probed >= 1)) {
+		mutex_unlock(&i7core_edac_lock);
+		return -EINVAL;
+	}
+	probed++;
+
+	rc = i7core_get_devices(pci_dev_table);
+	if (unlikely(rc < 0))
+		goto fail0;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		int channels;
+		int csrows;
+
+		/* Check the number of active and not disabled channels */
+		rc = i7core_get_active_channels(i7core_dev->socket,
+						&channels, &csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+
+		rc = i7core_register_mci(i7core_dev, channels, csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	i7core_printk(KERN_INFO, "Driver loaded.\n");
+
+	mutex_unlock(&i7core_edac_lock);
+	return 0;
+
+fail1:
+	i7core_put_all_devices();
+fail0:
+	mutex_unlock(&i7core_edac_lock);
+	return rc;
+}
+
+/*
+ *	i7core_remove	destructor for one instance of device
+ *
+ */
+static void __devexit i7core_remove(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_dev *i7core_dev, *tmp;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	if (i7core_pci)
+		edac_pci_release_generic_ctl(i7core_pci);
+
+	/*
+	 * we have a trouble here: pdev value for removal will be wrong, since
+	 * it will point to the X58 register used to detect that the machine
+	 * is a Nehalem or upper design. However, due to the way several PCI
+	 * devices are grouped together to provide MC functionality, we need
+	 * to use a different method for releasing the devices
+	 */
+
+	mutex_lock(&i7core_edac_lock);
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+		mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+		if (mci) {
+			struct i7core_pvt *pvt = mci->pvt_info;
+
+			i7core_dev = pvt->i7core_dev;
+			edac_mce_unregister(&pvt->edac_mce);
+			kfree(mci->ctl_name);
+			edac_mc_free(mci);
+			i7core_put_devices(i7core_dev);
+		} else {
+			i7core_printk(KERN_ERR,
+				      "Couldn't find mci for socket %d\n",
+				      i7core_dev->socket);
+		}
+	}
+	probed--;
+
+	mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ *	i7core_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+	.name     = "i7core_edac",
+	.probe    = i7core_probe,
+	.remove   = __devexit_p(i7core_remove),
+	.id_table = i7core_pci_tbl,
+};
+
+/*
+ *	i7core_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	i7core_xeon_pci_fixup(pci_dev_table);
+
+	pci_rc = pci_register_driver(&i7core_driver);
+
+	if (pci_rc >= 0)
+		return 0;
+
+	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      pci_rc);
+
+	return pci_rc;
+}
+
+/*
+ *	i7core_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&i7core_driver);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+		   I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 52ca09b..1052340 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -336,6 +336,7 @@
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
 
 static struct of_platform_driver mpc85xx_pci_err_driver = {
 	.probe = mpc85xx_pci_err_probe,
@@ -650,6 +651,7 @@
 	{ .compatible = "fsl,p2020-l2-cache-controller", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
 
 static struct of_platform_driver mpc85xx_l2_err_driver = {
 	.probe = mpc85xx_l2_err_probe,
@@ -1120,11 +1122,13 @@
 	{ .compatible = "fsl,mpc8555-memory-controller", },
 	{ .compatible = "fsl,mpc8560-memory-controller", },
 	{ .compatible = "fsl,mpc8568-memory-controller", },
+	{ .compatible = "fsl,mpc8569-memory-controller", },
 	{ .compatible = "fsl,mpc8572-memory-controller", },
 	{ .compatible = "fsl,mpc8349-memory-controller", },
 	{ .compatible = "fsl,p2020-memory-controller", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
 
 static struct of_platform_driver mpc85xx_mc_err_driver = {
 	.probe = mpc85xx_mc_err_probe,
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 9dcb304..371713f 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -231,7 +231,7 @@
 static void fw_card_bm_work(struct work_struct *work)
 {
 	struct fw_card *card = container_of(work, struct fw_card, work.work);
-	struct fw_device *root_device;
+	struct fw_device *root_device, *irm_device;
 	struct fw_node *root_node;
 	unsigned long flags;
 	int root_id, new_root_id, irm_id, local_id;
@@ -239,6 +239,7 @@
 	bool do_reset = false;
 	bool root_device_is_running;
 	bool root_device_is_cmc;
+	bool irm_is_1394_1995_only;
 
 	spin_lock_irqsave(&card->lock, flags);
 
@@ -248,12 +249,18 @@
 	}
 
 	generation = card->generation;
+
 	root_node = card->root_node;
 	fw_node_get(root_node);
 	root_device = root_node->data;
 	root_device_is_running = root_device &&
 			atomic_read(&root_device->state) == FW_DEVICE_RUNNING;
 	root_device_is_cmc = root_device && root_device->cmc;
+
+	irm_device = card->irm_node->data;
+	irm_is_1394_1995_only = irm_device && irm_device->config_rom &&
+			(irm_device->config_rom[2] & 0x000000f0) == 0;
+
 	root_id  = root_node->node_id;
 	irm_id   = card->irm_node->node_id;
 	local_id = card->local_node->node_id;
@@ -276,8 +283,15 @@
 
 		if (!card->irm_node->link_on) {
 			new_root_id = local_id;
-			fw_notify("IRM has link off, making local node (%02x) root.\n",
-				  new_root_id);
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "IRM has link off", new_root_id);
+			goto pick_me;
+		}
+
+		if (irm_is_1394_1995_only) {
+			new_root_id = local_id;
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "IRM is not 1394a compliant", new_root_id);
 			goto pick_me;
 		}
 
@@ -316,8 +330,8 @@
 			 * root, and thus, IRM.
 			 */
 			new_root_id = local_id;
-			fw_notify("BM lock failed, making local node (%02x) root.\n",
-				  new_root_id);
+			fw_notify("%s, making local node (%02x) root.\n",
+				  "BM lock failed", new_root_id);
 			goto pick_me;
 		}
 	} else if (card->bm_generation != generation) {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 724038d..7face91 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1,5 +1,5 @@
 #
-# GPIO infrastructure and expanders
+# platform-neutral GPIO infrastructure and expanders
 #
 
 config ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 51c3cdd..e53dcff 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,4 +1,8 @@
-# gpio support: dedicated expander chips, etc
+# generic gpio support: dedicated expander chips, etc
+#
+# NOTE: platform-specific GPIO drivers don't belong in the
+# drivers/gpio directory; put them with other platform setup
+# code, IRQ controllers, board init, etc.
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index f73a155..e23c068 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -352,6 +352,6 @@
 module_init(cs5535_gpio_init);
 module_exit(cs5535_gpio_exit);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3ca3654..4e51fe3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -893,10 +893,12 @@
 void gpio_unexport(unsigned gpio)
 {
 	struct gpio_desc	*desc;
-	int			status = -EINVAL;
+	int			status = 0;
 
-	if (!gpio_is_valid(gpio))
+	if (!gpio_is_valid(gpio)) {
+		status = -EINVAL;
 		goto done;
+	}
 
 	mutex_lock(&sysfs_lock);
 
@@ -911,7 +913,6 @@
 			clear_bit(FLAG_EXPORT, &desc->flags);
 			put_device(dev);
 			device_unregister(dev);
-			status = 0;
 		} else
 			status = -ENODEV;
 	}
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index ee568c8..5005990 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -232,7 +232,7 @@
 	desc->chip->unmask(irq);
 }
 
-static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
+static int pl061_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct pl061_platform_data *pdata;
 	struct pl061_gpio *chip;
@@ -333,7 +333,7 @@
 	return ret;
 }
 
-static struct amba_id pl061_ids[] __initdata = {
+static struct amba_id pl061_ids[] = {
 	{
 		.id	= 0x00041061,
 		.mask	= 0x000fffff,
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 994d23b..57cea01 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1840,8 +1840,10 @@
 
 		ret = copy_from_user(clips, clips_ptr,
 				     num_clips * sizeof(*clips));
-		if (ret)
+		if (ret) {
+			ret = -EFAULT;
 			goto out_err2;
+		}
 	}
 
 	if (fb->funcs->dirty) {
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c198186..f87bf10 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -864,8 +864,8 @@
 		mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0,
 				    false);
 		mode->hdisplay = 1366;
-		mode->vsync_start = mode->vsync_start - 1;
-		mode->vsync_end = mode->vsync_end - 1;
+		mode->hsync_start = mode->hsync_start - 1;
+		mode->hsync_end = mode->hsync_end - 1;
 		return mode;
 	}
 
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index b3779d2..7196620 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -146,7 +146,7 @@
 				cvt = 1;
 			break;
 		case 'R':
-			if (!cvt)
+			if (cvt)
 				rb = 1;
 			break;
 		case 'm':
@@ -264,7 +264,7 @@
 int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed,
 			void *panic_str)
 {
-	DRM_ERROR("panic occurred, switching back to text console\n");
+	printk(KERN_ERR "panic occurred, switching back to text console\n");
 	return drm_fb_helper_force_kernel_mode();
 	return 0;
 }
@@ -315,8 +315,9 @@
 	struct drm_device *dev = fb_helper->dev;
 	struct drm_crtc *crtc;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_connector *connector;
 	struct drm_encoder *encoder;
-	int i;
+	int i, j;
 
 	/*
 	 * For each CRTC in this fb, turn the crtc on then,
@@ -332,7 +333,14 @@
 
 		crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
 
-
+		/* Walk the connectors & encoders on this fb turning them on */
+		for (j = 0; j < fb_helper->connector_count; j++) {
+			connector = fb_helper->connector_info[j]->connector;
+			connector->dpms = DRM_MODE_DPMS_ON;
+			drm_connector_property_set_value(connector,
+							 dev->mode_config.dpms_property,
+							 DRM_MODE_DPMS_ON);
+		}
 		/* Found a CRTC on this fb, now find encoders */
 		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 			if (encoder->crtc == crtc) {
@@ -352,8 +360,9 @@
 	struct drm_device *dev = fb_helper->dev;
 	struct drm_crtc *crtc;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_connector *connector;
 	struct drm_encoder *encoder;
-	int i;
+	int i, j;
 
 	/*
 	 * For each CRTC in this fb, find all associated encoders
@@ -367,6 +376,14 @@
 		if (!crtc->enabled)
 			continue;
 
+		/* Walk the connectors on this fb and mark them off */
+		for (j = 0; j < fb_helper->connector_count; j++) {
+			connector = fb_helper->connector_info[j]->connector;
+			connector->dpms = dpms_mode;
+			drm_connector_property_set_value(connector,
+							 dev->mode_config.dpms_property,
+							 dpms_mode);
+		}
 		/* Found a CRTC on this fb, now find encoders */
 		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 			if (encoder->crtc == crtc) {
@@ -1024,11 +1041,18 @@
 	}
 
 create_mode:
-	mode = drm_cvt_mode(fb_helper_conn->connector->dev, cmdline_mode->xres,
-			    cmdline_mode->yres,
-			    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
-			    cmdline_mode->rb, cmdline_mode->interlace,
-			    cmdline_mode->margins);
+	if (cmdline_mode->cvt)
+		mode = drm_cvt_mode(fb_helper_conn->connector->dev,
+				    cmdline_mode->xres, cmdline_mode->yres,
+				    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+				    cmdline_mode->rb, cmdline_mode->interlace,
+				    cmdline_mode->margins);
+	else
+		mode = drm_gtf_mode(fb_helper_conn->connector->dev,
+				    cmdline_mode->xres, cmdline_mode->yres,
+				    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+				    cmdline_mode->interlace,
+				    cmdline_mode->margins);
 	drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 	list_add(&mode->head, &fb_helper_conn->connector->modes);
 	return mode;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 66c697b..56f6642 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -208,7 +208,7 @@
 	uint8_t ctl2;
 
 	if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
-		if (ctl2 & TFP410_CTL_2_HTPLG)
+		if (ctl2 & TFP410_CTL_2_RSEN)
 			ret = connector_status_connected;
 		else
 			ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 52510ad..9214119 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -605,6 +605,9 @@
 		case FBC_NOT_TILED:
 			seq_printf(m, "scanout buffer not tiled");
 			break;
+		case FBC_MULTIPLE_PIPES:
+			seq_printf(m, "multiple pipes are enabled");
+			break;
 		default:
 			seq_printf(m, "unknown reason");
 		}
@@ -620,7 +623,7 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	bool sr_enabled = false;
 
-	if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev))
+	if (IS_I965GM(dev) || IS_I945G(dev) || IS_I945GM(dev))
 		sr_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
 	else if (IS_I915GM(dev))
 		sr_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index b2ebf02..2305a12 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -128,9 +128,11 @@
 	if (dev->irq_enabled)
 		drm_irq_uninstall(dev);
 
+	mutex_lock(&dev->struct_mutex);
 	intel_cleanup_ring_buffer(dev, &dev_priv->render_ring);
 	if (HAS_BSD(dev))
 		intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring);
+	mutex_unlock(&dev->struct_mutex);
 
 	/* Clear the HWS virtual address at teardown */
 	if (I915_NEED_GFX_HWS(dev))
@@ -1229,7 +1231,7 @@
 static void i915_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_mm_node *compressed_fb, *compressed_llb;
+	struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
 	unsigned long cfb_base;
 	unsigned long ll_base = 0;
 
@@ -1298,7 +1300,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	drm_mm_put_block(dev_priv->compressed_fb);
-	if (!IS_GM45(dev))
+	if (dev_priv->compressed_llb)
 		drm_mm_put_block(dev_priv->compressed_llb);
 }
 
@@ -1402,19 +1404,23 @@
 	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
 	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_ringbuffer;
 
 	ret = vga_switcheroo_register_client(dev->pdev,
 					     i915_switcheroo_set_state,
 					     i915_switcheroo_can_switch);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_vga_client;
+
+	/* IIR "flip pending" bit means done if this bit is set */
+	if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
+		dev_priv->flip_pending_is_done = true;
 
 	intel_modeset_init(dev);
 
 	ret = drm_irq_install(dev);
 	if (ret)
-		goto destroy_ringbuffer;
+		goto cleanup_vga_switcheroo;
 
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1426,11 +1432,20 @@
 
 	I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
 
-	intel_fbdev_init(dev);
+	ret = intel_fbdev_init(dev);
+	if (ret)
+		goto cleanup_irq;
+
 	drm_kms_helper_poll_init(dev);
 	return 0;
 
-destroy_ringbuffer:
+cleanup_irq:
+	drm_irq_uninstall(dev);
+cleanup_vga_switcheroo:
+	vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
+cleanup_ringbuffer:
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 9ed8ecd..2e1744d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -215,6 +215,7 @@
 	FBC_MODE_TOO_LARGE, /* mode too large for compression */
 	FBC_BAD_PLANE, /* fbc not supported on plane */
 	FBC_NOT_TILED, /* buffer not tiled */
+	FBC_MULTIPLE_PIPES, /* more than one pipe active */
 };
 
 enum intel_pch {
@@ -222,6 +223,8 @@
 	PCH_CPT,	/* Cougarpoint PCH */
 };
 
+#define QUIRK_PIPEA_FORCE (1<<0)
+
 struct intel_fbdev;
 
 typedef struct drm_i915_private {
@@ -278,6 +281,7 @@
 	struct mem_block *agp_heap;
 	unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
 	int vblank_pipe;
+	int num_pipe;
 
 	/* For hangcheck timer */
 #define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
@@ -336,6 +340,8 @@
 	/* PCH chipset type */
 	enum intel_pch pch_type;
 
+	unsigned long quirks;
+
 	/* Register state */
 	bool modeset_on_lid;
 	u8 saveLBB;
@@ -595,6 +601,7 @@
 	struct drm_crtc *plane_to_crtc_mapping[2];
 	struct drm_crtc *pipe_to_crtc_mapping[2];
 	wait_queue_head_t pending_flip_queue;
+	bool flip_pending_is_done;
 
 	/* Reclocking support */
 	bool render_reclock_avail;
@@ -1075,7 +1082,7 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;                \
 	if (I915_VERBOSE)						\
 		DRM_DEBUG("   BEGIN_LP_RING %x\n", (int)(n));		\
-	intel_ring_begin(dev, &dev_priv->render_ring, 4*(n));		\
+	intel_ring_begin(dev, &dev_priv->render_ring, (n));		\
 } while (0)
 
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 9ded3da..5aa747fc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2239,8 +2239,9 @@
 	mapping = inode->i_mapping;
 	for (i = 0; i < page_count; i++) {
 		page = read_cache_page_gfp(mapping, i,
-					   mapping_gfp_mask (mapping) |
+					   GFP_HIGHUSER |
 					   __GFP_COLD |
+					   __GFP_RECLAIMABLE |
 					   gfpmask);
 		if (IS_ERR(page))
 			goto err_pages;
@@ -3646,6 +3647,7 @@
 	return ret;
 }
 
+
 int
 i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv,
@@ -3793,7 +3795,7 @@
 				unsigned long long total_size = 0;
 				int num_fences = 0;
 				for (i = 0; i < args->buffer_count; i++) {
-					obj_priv = object_list[i]->driver_private;
+					obj_priv = to_intel_bo(object_list[i]);
 
 					total_size += object_list[i]->size;
 					num_fences +=
@@ -4741,6 +4743,16 @@
 	list_add(&dev_priv->mm.shrink_list, &shrink_list);
 	spin_unlock(&shrink_list_lock);
 
+	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+	if (IS_GEN3(dev)) {
+		u32 tmp = I915_READ(MI_ARB_STATE);
+		if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+			/* arb state is a masked write, so set bit + bit in mask */
+			tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+			I915_WRITE(MI_ARB_STATE, tmp);
+		}
+	}
+
 	/* Old X drivers will take 0-2 for front, back, depth buffers */
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		dev_priv->fence_reg_start = 3;
@@ -4977,7 +4989,7 @@
 }
 
 static int
-i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+i915_gem_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	drm_i915_private_t *dev_priv, *next_dev;
 	struct drm_i915_gem_object *obj_priv, *next_obj;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2479be0..dba53d4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -940,22 +940,30 @@
 		if (HAS_BSD(dev) && (iir & I915_BSD_USER_INTERRUPT))
 			DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
 
-		if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT)
+		if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
 			intel_prepare_page_flip(dev, 0);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 0);
+		}
 
-		if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT)
+		if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
 			intel_prepare_page_flip(dev, 1);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 1);
+		}
 
 		if (pipea_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 0);
-			intel_finish_page_flip(dev, 0);
+			if (!dev_priv->flip_pending_is_done)
+				intel_finish_page_flip(dev, 0);
 		}
 
 		if (pipeb_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 1);
-			intel_finish_page_flip(dev, 1);
+			if (!dev_priv->flip_pending_is_done)
+				intel_finish_page_flip(dev, 1);
 		}
 
 		if ((pipea_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
@@ -1387,29 +1395,10 @@
 	dev_priv->pipestat[1] = 0;
 
 	if (I915_HAS_HOTPLUG(dev)) {
-		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
-		/* Note HDMI and DP share bits */
-		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
-			hotplug_en |= HDMID_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
-			hotplug_en |= CRT_HOTPLUG_INT_EN;
-		/* Ignore TV since it's buggy */
-
-		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */
-		i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+		dev_priv->irq_mask_reg &= ~I915_DISPLAY_PORT_INTERRUPT;
 	}
 
 	/*
@@ -1427,16 +1416,41 @@
 	}
 	I915_WRITE(EMR, error_mask);
 
-	/* Disable pipe interrupt enables, clear pending pipe status */
-	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
-	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
-	/* Clear pending interrupt status */
-	I915_WRITE(IIR, I915_READ(IIR));
-
-	I915_WRITE(IER, enable_mask);
 	I915_WRITE(IMR, dev_priv->irq_mask_reg);
+	I915_WRITE(IER, enable_mask);
 	(void) I915_READ(IER);
 
+	if (I915_HAS_HOTPLUG(dev)) {
+		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+		/* Note HDMI and DP share bits */
+		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMID_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+			hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+			/* Programming the CRT detection parameters tends
+			   to generate a spurious hotplug event about three
+			   seconds later.  So just do it once.
+			*/
+			if (IS_G4X(dev))
+				hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+			hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+		}
+
+		/* Ignore TV since it's buggy */
+
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+	}
+
 	opregion_enable_asle(dev);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 64b0a3a..cf41c67 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -178,6 +178,7 @@
 #define   MI_OVERLAY_OFF	(0x2<<21)
 #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
 #define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
 #define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
@@ -358,6 +359,70 @@
 #define LM_BURST_LENGTH     0x00000700
 #define LM_FIFO_WATERMARK   0x0000001F
 #define MI_ARB_STATE	0x020e4 /* 915+ only */
+#define   MI_ARB_MASK_SHIFT	  16	/* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ *   fetches. This is not turned on by default
+ */
+#define   MI_ARB_RENDER_TLB_LOW_PRIORITY	(1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define   MI_ARB_ISOCH_WAIT_GTT			(1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define   MI_ARB_BLOCK_GRANT_MASK		(3 << 12)
+#define   MI_ARB_BLOCK_GRANT_8			(0 << 12)	/* for 3 display planes */
+#define   MI_ARB_BLOCK_GRANT_4			(1 << 12)	/* for 2 display planes */
+#define   MI_ARB_BLOCK_GRANT_2			(2 << 12)	/* for 1 display plane */
+#define   MI_ARB_BLOCK_GRANT_0			(3 << 12)	/* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define   MI_ARB_C3_LP_WRITE_ENABLE		(1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define   MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE	(1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define   MI_ARB_DUAL_DATA_PHASE_DISABLE       	(1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define   MI_ARB_CACHE_SNOOP_DISABLE		(1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define   MI_ARB_TIME_SLICE_MASK		(7 << 5)
+#define   MI_ARB_TIME_SLICE_1			(0 << 5)
+#define   MI_ARB_TIME_SLICE_2			(1 << 5)
+#define   MI_ARB_TIME_SLICE_4			(2 << 5)
+#define   MI_ARB_TIME_SLICE_6			(3 << 5)
+#define   MI_ARB_TIME_SLICE_8			(4 << 5)
+#define   MI_ARB_TIME_SLICE_10			(5 << 5)
+#define   MI_ARB_TIME_SLICE_14			(6 << 5)
+#define   MI_ARB_TIME_SLICE_16			(7 << 5)
+
+/* Low priority grace period page size */
+#define   MI_ARB_LOW_PRIORITY_GRACE_4KB		(0 << 4)	/* default */
+#define   MI_ARB_LOW_PRIORITY_GRACE_8KB		(1 << 4)
+
+/* Disable display A/B trickle feed */
+#define   MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE	(1 << 2)
+
+/* Set display plane priority */
+#define   MI_ARB_DISPLAY_PRIORITY_A_B		(0 << 0)	/* display A > display B */
+#define   MI_ARB_DISPLAY_PRIORITY_B_A		(1 << 0)	/* display B > display A */
+
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_MASK_SHIFT          16
 #define   CM0_IZ_OPT_DISABLE      (1<<6)
@@ -368,6 +433,9 @@
 #define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
 #define BB_ADDR		0x02140 /* 8 bytes */
 #define GFX_FLSH_CNTL	0x02170 /* 915+ only */
+#define ECOSKPD		0x021d0
+#define   ECO_GATING_CX_ONLY	(1<<3)
+#define   ECO_FLIP_DONE		(1<<0)
 
 /* GEN6 interrupt control */
 #define GEN6_RENDER_HWSTAM	0x2098
@@ -1130,7 +1198,6 @@
 #define CRT_HOTPLUG_DETECT_DELAY_2G		(1 << 4)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
-#define CRT_HOTPLUG_MASK			(0x3fc) /* Bits 9-2 */
 
 #define PORT_HOTPLUG_STAT	0x61114
 #define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
@@ -2802,6 +2869,7 @@
 
 #define PCH_PP_STATUS		0xc7200
 #define PCH_PP_CONTROL		0xc7204
+#define  PANEL_UNLOCK_REGS	(0xabcd << 16)
 #define  EDP_FORCE_VDD		(1 << 3)
 #define  EDP_BLC_ENABLE		(1 << 2)
 #define  PANEL_POWER_RESET	(1 << 1)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 22ff384..ee0732b 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -234,14 +234,8 @@
 	else
 		tries = 1;
 	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
-	hotplug_en &= CRT_HOTPLUG_MASK;
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_G4X(dev))
-		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
-
-	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-
 	for (i = 0; i < tries ; i++) {
 		unsigned long timeout;
 		/* turn on the FORCE_DETECT */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 88a1ab7..5e21b31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -862,8 +862,8 @@
 	intel_clock_t clock;
 	int max_n;
 	bool found;
-	/* approximately equals target * 0.00488 */
-	int err_most = (target >> 8) + (target >> 10);
+	/* approximately equals target * 0.00585 */
+	int err_most = (target >> 8) + (target >> 9);
 	found = false;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -1180,8 +1180,12 @@
 	struct drm_framebuffer *fb = crtc->fb;
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj_priv;
+	struct drm_crtc *tmp_crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int plane = intel_crtc->plane;
+	int crtcs_enabled = 0;
+
+	DRM_DEBUG_KMS("\n");
 
 	if (!i915_powersave)
 		return;
@@ -1199,10 +1203,21 @@
 	 * If FBC is already on, we just have to verify that we can
 	 * keep it that way...
 	 * Need to disable if:
+	 *   - more than one pipe is active
 	 *   - changing FBC params (stride, fence, mode)
 	 *   - new fb is too large to fit in compressed buffer
 	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
 	 */
+	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
+		if (tmp_crtc->enabled)
+			crtcs_enabled++;
+	}
+	DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
+	if (crtcs_enabled > 1) {
+		DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+		goto out_disable;
+	}
 	if (intel_fb->obj->size > dev_priv->cfb_size) {
 		DRM_DEBUG_KMS("framebuffer too large, disabling "
 				"compression\n");
@@ -1255,7 +1270,7 @@
 	}
 }
 
-static int
+int
 intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
@@ -2255,6 +2270,11 @@
 			intel_wait_for_vblank(dev);
 		}
 
+		/* Don't disable pipe A or pipe A PLLs if needed */
+		if (pipeconf_reg == PIPEACONF &&
+		    (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+			goto skip_pipe_off;
+
 		/* Next, disable display pipes */
 		temp = I915_READ(pipeconf_reg);
 		if ((temp & PIPEACONF_ENABLE) != 0) {
@@ -2270,7 +2290,7 @@
 			I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
 			I915_READ(dpll_reg);
 		}
-
+	skip_pipe_off:
 		/* Wait for the clocks to turn off. */
 		udelay(150);
 		break;
@@ -2356,8 +2376,6 @@
 		if (mode->clock * 3 > 27000 * 4)
 			return MODE_CLOCK_HIGH;
 	}
-
-	drm_mode_set_crtcinfo(adjusted_mode, 0);
 	return true;
 }
 
@@ -2970,11 +2988,13 @@
 		if (srwm < 0)
 			srwm = 1;
 		srwm &= 0x3f;
-		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+		if (IS_I965GM(dev))
+			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
 	} else {
 		/* Turn off self refresh if both pipes are enabled */
-		I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
-					& ~FW_BLC_SELF_EN);
+		if (IS_I965GM(dev))
+			I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+				   & ~FW_BLC_SELF_EN);
 	}
 
 	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
@@ -3653,6 +3673,11 @@
 			pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
 	}
 
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+	dpll |= DPLL_VCO_ENABLE;
+
+
 	/* Disable the panel fitter if it was on our pipe */
 	if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
 		I915_WRITE(PFIT_CONTROL, 0);
@@ -3729,6 +3754,7 @@
 			if (dev_priv->lvds_dither) {
 				if (HAS_PCH_SPLIT(dev)) {
 					pipeconf |= PIPE_ENABLE_DITHER;
+					pipeconf &= ~PIPE_DITHER_TYPE_MASK;
 					pipeconf |= PIPE_DITHER_TYPE_ST01;
 				} else
 					lvds |= LVDS_ENABLE_DITHER;
@@ -3973,6 +3999,13 @@
 			DRM_ERROR("failed to pin cursor bo\n");
 			goto fail_locked;
 		}
+
+		ret = i915_gem_object_set_to_gtt_domain(bo, 0);
+		if (ret) {
+			DRM_ERROR("failed to move cursor bo into the GTT\n");
+			goto fail_unpin;
+		}
+
 		addr = obj_priv->gtt_offset;
 	} else {
 		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
@@ -4016,6 +4049,8 @@
 	intel_crtc->cursor_bo = bo;
 
 	return 0;
+fail_unpin:
+	i915_gem_object_unpin(bo);
 fail_locked:
 	mutex_unlock(&dev->struct_mutex);
 fail:
@@ -4396,7 +4431,8 @@
 		DRM_DEBUG_DRIVER("upclocking LVDS\n");
 
 		/* Unlock panel regs */
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   PANEL_UNLOCK_REGS);
 
 		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
@@ -4439,7 +4475,8 @@
 		DRM_DEBUG_DRIVER("downclocking LVDS\n");
 
 		/* Unlock panel regs */
-		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   PANEL_UNLOCK_REGS);
 
 		dpll |= DISPLAY_RATE_SELECT_FPA1;
 		I915_WRITE(dpll_reg, dpll);
@@ -4469,6 +4506,7 @@
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_crtc *crtc;
 	struct intel_crtc *intel_crtc;
+	int enabled = 0;
 
 	if (!i915_powersave)
 		return;
@@ -4477,21 +4515,22 @@
 
 	i915_update_gfx_val(dev_priv);
 
-	if (IS_I945G(dev) || IS_I945GM(dev)) {
-		DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
-		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
-	}
-
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		/* Skip inactive CRTCs */
 		if (!crtc->fb)
 			continue;
 
+		enabled++;
 		intel_crtc = to_intel_crtc(crtc);
 		if (!intel_crtc->busy)
 			intel_decrease_pllclock(crtc);
 	}
 
+	if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
+		DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+	}
+
 	mutex_unlock(&dev->struct_mutex);
 }
 
@@ -4587,10 +4626,10 @@
 	kfree(work);
 }
 
-void intel_finish_page_flip(struct drm_device *dev, int pipe)
+static void do_intel_finish_page_flip(struct drm_device *dev,
+				      struct drm_crtc *crtc)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
 	struct drm_i915_gem_object *obj_priv;
@@ -4634,6 +4673,22 @@
 	schedule_work(&work->work);
 }
 
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
 void intel_prepare_page_flip(struct drm_device *dev, int plane)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -4661,9 +4716,10 @@
 	struct drm_gem_object *obj;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
-	unsigned long flags;
+	unsigned long flags, offset;
 	int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
 	int ret, pipesrc;
+	u32 flip_mask;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
 	if (work == NULL)
@@ -4717,16 +4773,33 @@
 	atomic_inc(&obj_priv->pending_flip);
 	work->pending_flip_obj = obj;
 
+	if (intel_crtc->plane)
+		flip_mask = I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
+	else
+		flip_mask = I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
+
+	/* Wait for any previous flip to finish */
+	if (IS_GEN3(dev))
+		while (I915_READ(ISR) & flip_mask)
+			;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = obj_priv->gtt_offset;
+	offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
+
 	BEGIN_LP_RING(4);
-	OUT_RING(MI_DISPLAY_FLIP |
-		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
-	OUT_RING(fb->pitch);
 	if (IS_I965G(dev)) {
-		OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
+		OUT_RING(MI_DISPLAY_FLIP |
+			 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+		OUT_RING(fb->pitch);
+		OUT_RING(offset | obj_priv->tiling_mode);
 		pipesrc = I915_READ(pipesrc_reg); 
 		OUT_RING(pipesrc & 0x0fff0fff);
 	} else {
-		OUT_RING(obj_priv->gtt_offset);
+		OUT_RING(MI_DISPLAY_FLIP_I915 |
+			 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+		OUT_RING(fb->pitch);
+		OUT_RING(offset);
 		OUT_RING(MI_NOOP);
 	}
 	ADVANCE_LP_RING();
@@ -5458,10 +5531,69 @@
 	}
 }
 
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times.  This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+	DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+}
+
+struct intel_quirk {
+	int device;
+	int subsystem_vendor;
+	int subsystem_device;
+	void (*hook)(struct drm_device *dev);
+};
+
+struct intel_quirk intel_quirks[] = {
+	/* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
+	{ 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
+	/* HP Mini needs pipe A force quirk (LP: #322104) */
+	{ 0x27ae,0x103c, 0x361a, quirk_pipea_force },
+
+	/* Thinkpad R31 needs pipe A force quirk */
+	{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+	/* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+	{ 0x3577,  0x1014, 0x0513, quirk_pipea_force },
+	/* ThinkPad X40 needs pipe A force quirk */
+
+	/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+	{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+	/* 855 & before need to leave pipe A & dpll A up */
+	{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+	{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+	struct pci_dev *d = dev->pdev;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
+		struct intel_quirk *q = &intel_quirks[i];
+
+		if (d->device == q->device &&
+		    (d->subsystem_vendor == q->subsystem_vendor ||
+		     q->subsystem_vendor == PCI_ANY_ID) &&
+		    (d->subsystem_device == q->subsystem_device ||
+		     q->subsystem_device == PCI_ANY_ID))
+			q->hook(dev);
+	}
+}
+
 void intel_modeset_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int num_pipe;
 	int i;
 
 	drm_mode_config_init(dev);
@@ -5471,6 +5603,8 @@
 
 	dev->mode_config.funcs = (void *)&intel_mode_funcs;
 
+	intel_init_quirks(dev);
+
 	intel_init_display(dev);
 
 	if (IS_I965G(dev)) {
@@ -5491,13 +5625,13 @@
 		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
 
 	if (IS_MOBILE(dev) || IS_I9XX(dev))
-		num_pipe = 2;
+		dev_priv->num_pipe = 2;
 	else
-		num_pipe = 1;
+		dev_priv->num_pipe = 1;
 	DRM_DEBUG_KMS("%d display pipe%s available.\n",
-		  num_pipe, num_pipe > 1 ? "s" : "");
+		      dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
 
-	for (i = 0; i < num_pipe; i++) {
+	for (i = 0; i < dev_priv->num_pipe; i++) {
 		intel_crtc_init(dev, i);
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 49b54f0..5dde80f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -136,6 +136,12 @@
 }
 
 static int
+intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+	return (max_link_clock * max_lanes * 8) / 10;
+}
+
+static int
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
 {
@@ -144,8 +150,11 @@
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
 	int max_lanes = intel_dp_max_lane_count(intel_encoder);
 
-	if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
-			> max_link_clock * max_lanes)
+	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
+	   which are outside spec tolerances but somehow work by magic */
+	if (!IS_eDP(intel_encoder) &&
+	    (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
+	     > intel_dp_max_data_rate(max_link_clock, max_lanes)))
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -506,7 +515,7 @@
 
 	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 		for (clock = 0; clock <= max_clock; clock++) {
-			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 
 			if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
 					<= link_avail) {
@@ -521,6 +530,18 @@
 			}
 		}
 	}
+
+	if (IS_eDP(intel_encoder)) {
+		/* okay we failed just pick the highest */
+		dp_priv->lane_count = max_lane_count;
+		dp_priv->link_bw = bws[max_clock];
+		adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+		DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+			      "count %d clock %d\n",
+			      dp_priv->link_bw, dp_priv->lane_count,
+			      adjusted_mode->clock);
+		return true;
+	}
 	return false;
 }
 
@@ -696,6 +717,51 @@
 	}
 }
 
+static void ironlake_edp_panel_on (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+	u32 pp, pp_status;
+
+	pp_status = I915_READ(PCH_PP_STATUS);
+	if (pp_status & PP_ON)
+		return;
+
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	do {
+		pp_status = I915_READ(PCH_PP_STATUS);
+	} while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout));
+
+	if (time_after(jiffies, timeout))
+		DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status);
+
+	pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD);
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void ironlake_edp_panel_off (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+	u32 pp, pp_status;
+
+	pp = I915_READ(PCH_PP_CONTROL);
+	pp &= ~POWER_TARGET_ON;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	do {
+		pp_status = I915_READ(PCH_PP_STATUS);
+	} while ((pp_status & PP_ON) && !time_after(jiffies, timeout));
+
+	if (time_after(jiffies, timeout))
+		DRM_DEBUG_KMS("panel off wait timed out\n");
+
+	/* Make sure VDD is enabled so DP AUX will work */
+	pp |= EDP_FORCE_VDD;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
 static void ironlake_edp_backlight_on (struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -730,14 +796,18 @@
 	if (mode != DRM_MODE_DPMS_ON) {
 		if (dp_reg & DP_PORT_EN) {
 			intel_dp_link_down(intel_encoder, dp_priv->DP);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder)) {
 				ironlake_edp_backlight_off(dev);
+				ironlake_edp_panel_off(dev);
+			}
 		}
 	} else {
 		if (!(dp_reg & DP_PORT_EN)) {
 			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
-			if (IS_eDP(intel_encoder))
+			if (IS_eDP(intel_encoder)) {
+				ironlake_edp_panel_on(dev);
 				ironlake_edp_backlight_on(dev);
+			}
 		}
 	}
 	dp_priv->dpms_mode = mode;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index df931f7..2f7970b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -215,6 +215,9 @@
 extern void ironlake_enable_drps(struct drm_device *dev);
 extern void ironlake_disable_drps(struct drm_device *dev);
 
+extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
+				      struct drm_gem_object *obj);
+
 extern int intel_framebuffer_init(struct drm_device *dev,
 				  struct intel_framebuffer *ifb,
 				  struct drm_mode_fb_cmd *mode_cmd,
@@ -224,6 +227,7 @@
 
 extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
 extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
+extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
 
 extern void intel_setup_overlay(struct drm_device *dev);
 extern void intel_cleanup_overlay(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index f8c76e6..3e18c9e 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -98,7 +98,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_pin(fbo, 64*1024);
+	ret = intel_pin_and_fence_fb_obj(dev, fbo);
 	if (ret) {
 		DRM_ERROR("failed to pin fb: %d\n", ret);
 		goto out_unref;
@@ -236,7 +236,7 @@
 
 	drm_framebuffer_cleanup(&ifb->base);
 	if (ifb->obj)
-		drm_gem_object_unreference_unlocked(ifb->obj);
+		drm_gem_object_unreference(ifb->obj);
 
 	return 0;
 }
@@ -245,6 +245,7 @@
 {
 	struct intel_fbdev *ifbdev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
 
 	ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
 	if (!ifbdev)
@@ -253,8 +254,13 @@
 	dev_priv->fbdev = ifbdev;
 	ifbdev->helper.funcs = &intel_fb_helper_funcs;
 
-	drm_fb_helper_init(dev, &ifbdev->helper, 2,
-			   INTELFB_CONN_LIMIT);
+	ret = drm_fb_helper_init(dev, &ifbdev->helper,
+				 dev_priv->num_pipe,
+				 INTELFB_CONN_LIMIT);
+	if (ret) {
+		kfree(ifbdev);
+		return ret;
+	}
 
 	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
 	drm_fb_helper_initial_config(&ifbdev->helper, 32);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6a1accd..0eab8df 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -599,6 +599,26 @@
 	return 0;
 }
 
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+	return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+	{
+		.callback = intel_no_modeset_on_lid_dmi_callback,
+		.ident = "Toshiba Tecra A11",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
 /*
  * Lid events. Note the use of 'modeset_on_lid':
  *  - we set it on lid close, and reset it on open
@@ -622,6 +642,9 @@
 	 */
 	if (connector)
 		connector->status = connector->funcs->detect(connector);
+	/* Don't force modeset on machines where it causes a GPU lockup */
+	if (dmi_check_system(intel_no_modeset_on_lid))
+		return NOTIFY_OK;
 	if (!acpi_lid_open()) {
 		dev_priv->modeset_on_lid = 1;
 		return NOTIFY_OK;
@@ -983,8 +1006,8 @@
 
 	drm_connector_attach_property(&intel_connector->base,
 				      dev->mode_config.scaling_mode_property,
-				      DRM_MODE_SCALE_FULLSCREEN);
-	lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
+				      DRM_MODE_SCALE_ASPECT);
+	lvds_priv->fitting_mode = DRM_MODE_SCALE_ASPECT;
 	/*
 	 * LVDS discovery:
 	 * 1) check for EDID on DDC
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index cea4f1a8..26362f8 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -94,7 +94,7 @@
 #if WATCH_EXEC
 		DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
 #endif
-		intel_ring_begin(dev, ring, 8);
+		intel_ring_begin(dev, ring, 2);
 		intel_ring_emit(dev, ring, cmd);
 		intel_ring_emit(dev, ring, MI_NOOP);
 		intel_ring_advance(dev, ring);
@@ -358,7 +358,7 @@
 		u32     invalidate_domains,
 		u32     flush_domains)
 {
-	intel_ring_begin(dev, ring, 8);
+	intel_ring_begin(dev, ring, 2);
 	intel_ring_emit(dev, ring, MI_FLUSH);
 	intel_ring_emit(dev, ring, MI_NOOP);
 	intel_ring_advance(dev, ring);
@@ -687,6 +687,7 @@
 		*virt++ = MI_NOOP;
 
 	ring->tail = 0;
+	ring->space = ring->head - 8;
 
 	return 0;
 }
@@ -721,8 +722,9 @@
 }
 
 void intel_ring_begin(struct drm_device *dev,
-		struct intel_ring_buffer *ring, int n)
+		struct intel_ring_buffer *ring, int num_dwords)
 {
+	int n = 4*num_dwords;
 	if (unlikely(ring->tail + n > ring->size))
 		intel_wrap_ring_buffer(dev, ring);
 	if (unlikely(ring->space < n))
@@ -752,7 +754,7 @@
 {
 	unsigned int *virt = ring->virtual_start + ring->tail;
 	BUG_ON((len&~(4-1)) != 0);
-	intel_ring_begin(dev, ring, len);
+	intel_ring_begin(dev, ring, len/4);
 	memcpy(virt, data, len);
 	ring->tail += len;
 	ring->tail &= ring->size - 1;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 9ba2dea..e492919f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -203,36 +203,26 @@
 	const bool rw;
 };
 
-static struct methods nv04_methods[] = {
-	{ "PROM", load_vbios_prom, false },
+static struct methods shadow_methods[] = {
 	{ "PRAMIN", load_vbios_pramin, true },
+	{ "PROM", load_vbios_prom, false },
 	{ "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
 	{ "ACPI", load_vbios_acpi, true },
-	{ "PRAMIN", load_vbios_pramin, true },
-	{ "PROM", load_vbios_prom, false },
-	{ "PCIROM", load_vbios_pci, true },
 };
 
-#define METHODCNT 3
-
 static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct methods *methods;
-	int i;
+	const int nr_methods = ARRAY_SIZE(shadow_methods);
+	struct methods *methods = shadow_methods;
 	int testscore = 3;
-	int scores[METHODCNT];
+	int scores[nr_methods], i;
 
 	if (nouveau_vbios) {
-		methods = nv04_methods;
-		for (i = 0; i < METHODCNT; i++)
+		for (i = 0; i < nr_methods; i++)
 			if (!strcasecmp(nouveau_vbios, methods[i].desc))
 				break;
 
-		if (i < METHODCNT) {
+		if (i < nr_methods) {
 			NV_INFO(dev, "Attempting to use BIOS image from %s\n",
 				methods[i].desc);
 
@@ -244,12 +234,7 @@
 		NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
 	}
 
-	if (dev_priv->card_type < NV_50)
-		methods = nv04_methods;
-	else
-		methods = nv50_methods;
-
-	for (i = 0; i < METHODCNT; i++) {
+	for (i = 0; i < nr_methods; i++) {
 		NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
 			 methods[i].desc);
 		data[0] = data[1] = 0;	/* avoid reuse of previous image */
@@ -260,7 +245,7 @@
 	}
 
 	while (--testscore > 0) {
-		for (i = 0; i < METHODCNT; i++) {
+		for (i = 0; i < nr_methods; i++) {
 			if (scores[i] == testscore) {
 				NV_TRACE(dev, "Using BIOS image from %s\n",
 					 methods[i].desc);
@@ -834,7 +819,7 @@
 	if (i2c_index == 0x81)
 		i2c_index = (dcb->i2c_default_indices & 0xf0) >> 4;
 
-	if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) {
+	if (i2c_index >= DCB_MAX_NUM_I2C_ENTRIES) {
 		NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index);
 		return NULL;
 	}
@@ -3920,7 +3905,8 @@
 
 static uint8_t *
 bios_output_config_match(struct drm_device *dev, struct dcb_entry *dcbent,
-			 uint16_t record, int record_len, int record_nr)
+			 uint16_t record, int record_len, int record_nr,
+			 bool match_link)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->vbios;
@@ -3928,12 +3914,28 @@
 	uint16_t table;
 	int i, v;
 
+	switch (dcbent->type) {
+	case OUTPUT_TMDS:
+	case OUTPUT_LVDS:
+	case OUTPUT_DP:
+		break;
+	default:
+		match_link = false;
+		break;
+	}
+
 	for (i = 0; i < record_nr; i++, record += record_len) {
 		table = ROM16(bios->data[record]);
 		if (!table)
 			continue;
 		entry = ROM32(bios->data[table]);
 
+		if (match_link) {
+			v = (entry & 0x00c00000) >> 22;
+			if (!(v & dcbent->sorconf.link))
+				continue;
+		}
+
 		v = (entry & 0x000f0000) >> 16;
 		if (!(v & dcbent->or))
 			continue;
@@ -3975,7 +3977,7 @@
 	*length = table[4];
 	return bios_output_config_match(dev, dcbent,
 					bios->display.dp_table_ptr + table[1],
-					table[2], table[3]);
+					table[2], table[3], table[0] >= 0x21);
 }
 
 int
@@ -4064,7 +4066,7 @@
 			dcbent->type, dcbent->location, dcbent->or);
 	otable = bios_output_config_match(dev, dcbent, table[1] +
 					  bios->display.script_table_ptr,
-					  table[2], table[3]);
+					  table[2], table[3], table[0] >= 0x21);
 	if (!otable) {
 		NV_ERROR(dev, "Couldn't find matching output script table\n");
 		return 1;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index fd4a2df..257ea13 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -377,6 +377,7 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_fbdev *nfbdev;
+	int ret;
 
 	nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
 	if (!nfbdev)
@@ -386,7 +387,13 @@
 	dev_priv->nfbdev = nfbdev;
 	nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
 
-	drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+	ret = drm_fb_helper_init(dev, &nfbdev->helper,
+				 nv_two_heads(dev) ? 2 : 1, 4);
+	if (ret) {
+		kfree(nfbdev);
+		return ret;
+	}
+
 	drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
 	drm_fb_helper_initial_config(&nfbdev->helper, 32);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 147e59c..b02a231 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -779,29 +779,24 @@
 			return ret;
 	}
 
-	/* map larger RAMIN aperture on NV40 cards */
-	dev_priv->ramin  = NULL;
+	/* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
 	if (dev_priv->card_type >= NV_40) {
 		int ramin_bar = 2;
 		if (pci_resource_len(dev->pdev, ramin_bar) == 0)
 			ramin_bar = 3;
 
 		dev_priv->ramin_size = pci_resource_len(dev->pdev, ramin_bar);
-		dev_priv->ramin = ioremap(
-				pci_resource_start(dev->pdev, ramin_bar),
+		dev_priv->ramin =
+			ioremap(pci_resource_start(dev->pdev, ramin_bar),
 				dev_priv->ramin_size);
 		if (!dev_priv->ramin) {
-			NV_ERROR(dev, "Failed to init RAMIN mapping, "
-				      "limited instance memory available\n");
+			NV_ERROR(dev, "Failed to PRAMIN BAR");
+			return -ENOMEM;
 		}
-	}
-
-	/* On older cards (or if the above failed), create a map covering
-	 * the BAR0 PRAMIN aperture */
-	if (!dev_priv->ramin) {
+	} else {
 		dev_priv->ramin_size = 1 * 1024 * 1024;
 		dev_priv->ramin = ioremap(mmio_start_offs + NV_RAMIN,
-							dev_priv->ramin_size);
+					  dev_priv->ramin_size);
 		if (!dev_priv->ramin) {
 			NV_ERROR(dev, "Failed to map BAR0 PRAMIN.\n");
 			return -ENOMEM;
diff --git a/drivers/gpu/drm/nouveau/nv50_fb.c b/drivers/gpu/drm/nouveau/nv50_fb.c
index a95e694..32611bd 100644
--- a/drivers/gpu/drm/nouveau/nv50_fb.c
+++ b/drivers/gpu/drm/nouveau/nv50_fb.c
@@ -6,10 +6,16 @@
 int
 nv50_fb_init(struct drm_device *dev)
 {
-	/* This is needed to get meaningful information from 100c90
-	 * on traps. No idea what these values mean exactly. */
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
+	/* Not a clue what this is exactly.  Without pointing it at a
+	 * scratch page, VRAM->GART blits with M2MF (as in DDX DFS)
+	 * cause IOMMU "read from address 0" errors (rh#561267)
+	 */
+	nv_wr32(dev, 0x100c08, dev_priv->gart_info.sg_dummy_bus >> 8);
+
+	/* This is needed to get meaningful information from 100c90
+	 * on traps. No idea what these values mean exactly. */
 	switch (dev_priv->chipset) {
 	case 0x50:
 		nv_wr32(dev, 0x100c90, 0x0707ff);
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index c61782b..bb47ad7 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -31,7 +31,7 @@
 {
 	const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
 
-	if (gpio->line > 32)
+	if (gpio->line >= 32)
 		return -EINVAL;
 
 	*reg = nv50_gpio_reg[gpio->line >> 3];
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index f3f2827..8c2d647 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -498,7 +498,7 @@
 		if ((rdev->family == CHIP_RS600) ||
 		    (rdev->family == CHIP_RS690) ||
 		    (rdev->family == CHIP_RS740))
-			pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+			pll->flags |= (/*RADEON_PLL_USE_FRAC_FB_DIV |*/
 				       RADEON_PLL_PREFER_CLOSEST_LOWER);
 
 		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 0440c09..1caf625 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -41,12 +41,18 @@
 
 void evergreen_pm_misc(struct radeon_device *rdev)
 {
-	int requested_index = rdev->pm.requested_power_state_index;
-	struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
-	struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
 
-	if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
-		radeon_atom_set_voltage(rdev, voltage->voltage);
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 void evergreen_pm_prepare(struct radeon_device *rdev)
@@ -601,7 +607,7 @@
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
@@ -1216,11 +1222,11 @@
 		ps_thread_count = 128;
 
 	sq_thread_resource_mgmt = NUM_PS_THREADS(ps_thread_count);
-	sq_thread_resource_mgmt |= NUM_VS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt |= NUM_GS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt |= NUM_ES_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt_2 = NUM_HS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
-	sq_thread_resource_mgmt_2 |= NUM_LS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
+	sq_thread_resource_mgmt |= NUM_VS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt |= NUM_GS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt |= NUM_ES_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt_2 = NUM_HS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+	sq_thread_resource_mgmt_2 |= NUM_LS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
 
 	sq_stack_resource_mgmt_1 = NUM_PS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
 	sq_stack_resource_mgmt_1 |= NUM_VS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
@@ -1254,6 +1260,9 @@
 	WREG32(VGT_GS_VERTEX_REUSE, 16);
 	WREG32(PA_SC_LINE_STIPPLE_STATE, 0);
 
+	WREG32(VGT_VERTEX_REUSE_BLOCK_CNTL, 14);
+	WREG32(VGT_OUT_DEALLOC_CNTL, 16);
+
 	WREG32(CB_PERF_CTR0_SEL_0, 0);
 	WREG32(CB_PERF_CTR0_SEL_1, 0);
 	WREG32(CB_PERF_CTR1_SEL_0, 0);
@@ -1263,6 +1272,26 @@
 	WREG32(CB_PERF_CTR3_SEL_0, 0);
 	WREG32(CB_PERF_CTR3_SEL_1, 0);
 
+	/* clear render buffer base addresses */
+	WREG32(CB_COLOR0_BASE, 0);
+	WREG32(CB_COLOR1_BASE, 0);
+	WREG32(CB_COLOR2_BASE, 0);
+	WREG32(CB_COLOR3_BASE, 0);
+	WREG32(CB_COLOR4_BASE, 0);
+	WREG32(CB_COLOR5_BASE, 0);
+	WREG32(CB_COLOR6_BASE, 0);
+	WREG32(CB_COLOR7_BASE, 0);
+	WREG32(CB_COLOR8_BASE, 0);
+	WREG32(CB_COLOR9_BASE, 0);
+	WREG32(CB_COLOR10_BASE, 0);
+	WREG32(CB_COLOR11_BASE, 0);
+
+	/* set the shader const cache sizes to 0 */
+	for (i = SQ_ALU_CONST_BUFFER_SIZE_PS_0; i < 0x28200; i += 4)
+		WREG32(i, 0);
+	for (i = SQ_ALU_CONST_BUFFER_SIZE_HS_0; i < 0x29000; i += 4)
+		WREG32(i, 0);
+
 	hdp_host_path_cntl = RREG32(HDP_HOST_PATH_CNTL);
 	WREG32(HDP_HOST_PATH_CNTL, hdp_host_path_cntl);
 
@@ -2153,7 +2182,7 @@
 	if (r)
 		return r;
 
-	rdev->accel_working = false;
+	rdev->accel_working = true;
 	r = evergreen_startup(rdev);
 	if (r) {
 		dev_err(rdev->dev, "disabling GPU acceleration\n");
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 64516b9..345a75a 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -333,7 +333,6 @@
 	header = radeon_get_ib_value(p, h_idx);
 	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
 	reg = CP_PACKET0_GET_REG(header);
-	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
 		DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -368,7 +367,6 @@
 		}
 	}
 out:
-	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
 	return r;
 }
 
@@ -1197,7 +1195,7 @@
 					DRM_ERROR("bad SET_RESOURCE (tex)\n");
 					return -EINVAL;
 				}
-				ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
 					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
 				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
@@ -1209,7 +1207,7 @@
 					DRM_ERROR("bad SET_RESOURCE (tex)\n");
 					return -EINVAL;
 				}
-				ib[idx+1+(i*8)+4] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				mipmap = reloc->robj;
 				r = evergreen_check_texture_resource(p,  idx+1+(i*8),
 						texture, mipmap);
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 79683f6..a1cd621 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -713,6 +713,9 @@
 #define SQ_GSVS_RING_OFFSET_2				0x28930
 #define SQ_GSVS_RING_OFFSET_3				0x28934
 
+#define SQ_ALU_CONST_BUFFER_SIZE_PS_0			0x28140
+#define SQ_ALU_CONST_BUFFER_SIZE_HS_0			0x28f80
+
 #define SQ_ALU_CONST_CACHE_PS_0				0x28940
 #define SQ_ALU_CONST_CACHE_PS_1				0x28944
 #define SQ_ALU_CONST_CACHE_PS_2				0x28948
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index cc004b0..a89a15a 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -162,6 +162,11 @@
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+	/* mid sh */
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 	/* high sh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -172,6 +177,11 @@
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+	/* mid mh */
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 	/* high mh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -1220,7 +1230,6 @@
 	header = radeon_get_ib_value(p, h_idx);
 	crtc_id = radeon_get_ib_value(p, h_idx + 5);
 	reg = CP_PACKET0_GET_REG(header);
-	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
 		DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -1254,7 +1263,6 @@
 		ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
 	}
 out:
-	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
 	return r;
 }
 
@@ -1618,6 +1626,7 @@
 		case RADEON_TXFORMAT_RGB332:
 		case RADEON_TXFORMAT_Y8:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_AI88:
 		case RADEON_TXFORMAT_ARGB1555:
@@ -1629,12 +1638,14 @@
 		case RADEON_TXFORMAT_LDUDV655:
 		case RADEON_TXFORMAT_DUDV88:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_ARGB8888:
 		case RADEON_TXFORMAT_RGBA8888:
 		case RADEON_TXFORMAT_SHADOW32:
 		case RADEON_TXFORMAT_LDUDUV8888:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case RADEON_TXFORMAT_DXT1:
 			track->textures[i].cpp = 1;
@@ -2341,6 +2352,7 @@
 	if (rdev->flags & RADEON_IS_IGP)
 		base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
@@ -2594,12 +2606,6 @@
 	int surf_index = reg * 16;
 	int flags = 0;
 
-	/* r100/r200 divide by 16 */
-	if (rdev->family < CHIP_R300)
-		flags = pitch / 16;
-	else
-		flags = pitch / 8;
-
 	if (rdev->family <= CHIP_RS200) {
 		if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
 				 == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
@@ -2623,6 +2629,20 @@
 	if (tiling_flags & RADEON_TILING_SWAP_32BIT)
 		flags |= RADEON_SURF_AP0_SWP_32BPP | RADEON_SURF_AP1_SWP_32BPP;
 
+	/* when we aren't tiling the pitch seems to needs to be furtherdivided down. - tested on power5 + rn50 server */
+	if (tiling_flags & (RADEON_TILING_SWAP_16BIT | RADEON_TILING_SWAP_32BIT)) {
+		if (!(tiling_flags & (RADEON_TILING_MACRO | RADEON_TILING_MICRO)))
+			if (ASIC_IS_RN50(rdev))
+				pitch /= 16;
+	}
+
+	/* r100/r200 divide by 16 */
+	if (rdev->family < CHIP_R300)
+		flags |= pitch / 16;
+	else
+		flags |= pitch / 8;
+
+
 	DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
 	WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
 	WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
@@ -3137,33 +3157,6 @@
 	DRM_ERROR("compress format            %d\n", t->compress_format);
 }
 
-static int r100_cs_track_cube(struct radeon_device *rdev,
-			      struct r100_cs_track *track, unsigned idx)
-{
-	unsigned face, w, h;
-	struct radeon_bo *cube_robj;
-	unsigned long size;
-
-	for (face = 0; face < 5; face++) {
-		cube_robj = track->textures[idx].cube_info[face].robj;
-		w = track->textures[idx].cube_info[face].width;
-		h = track->textures[idx].cube_info[face].height;
-
-		size = w * h;
-		size *= track->textures[idx].cpp;
-
-		size += track->textures[idx].cube_info[face].offset;
-
-		if (size > radeon_bo_size(cube_robj)) {
-			DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
-				  size, radeon_bo_size(cube_robj));
-			r100_cs_track_texture_print(&track->textures[idx]);
-			return -1;
-		}
-	}
-	return 0;
-}
-
 static int r100_track_compress_size(int compress_format, int w, int h)
 {
 	int block_width, block_height, block_bytes;
@@ -3194,6 +3187,37 @@
 	return sz;
 }
 
+static int r100_cs_track_cube(struct radeon_device *rdev,
+			      struct r100_cs_track *track, unsigned idx)
+{
+	unsigned face, w, h;
+	struct radeon_bo *cube_robj;
+	unsigned long size;
+	unsigned compress_format = track->textures[idx].compress_format;
+
+	for (face = 0; face < 5; face++) {
+		cube_robj = track->textures[idx].cube_info[face].robj;
+		w = track->textures[idx].cube_info[face].width;
+		h = track->textures[idx].cube_info[face].height;
+
+		if (compress_format) {
+			size = r100_track_compress_size(compress_format, w, h);
+		} else
+			size = w * h;
+		size *= track->textures[idx].cpp;
+
+		size += track->textures[idx].cube_info[face].offset;
+
+		if (size > radeon_bo_size(cube_robj)) {
+			DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
+				  size, radeon_bo_size(cube_robj));
+			r100_cs_track_texture_print(&track->textures[idx]);
+			return -1;
+		}
+	}
+	return 0;
+}
+
 static int r100_cs_track_texture_check(struct radeon_device *rdev,
 				       struct r100_cs_track *track)
 {
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 85617c3..0266d72 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -415,6 +415,8 @@
 		/* 2D, 3D, CUBE */
 		switch (tmp) {
 		case 0:
+		case 3:
+		case 4:
 		case 5:
 		case 6:
 		case 7:
@@ -450,6 +452,7 @@
 		case R200_TXFORMAT_RGB332:
 		case R200_TXFORMAT_Y8:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_AI88:
 		case R200_TXFORMAT_ARGB1555:
@@ -461,6 +464,7 @@
 		case R200_TXFORMAT_DVDU88:
 		case R200_TXFORMAT_AVYU4444:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_ARGB8888:
 		case R200_TXFORMAT_RGBA8888:
@@ -468,6 +472,7 @@
 		case R200_TXFORMAT_BGR111110:
 		case R200_TXFORMAT_LDVDU8888:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R200_TXFORMAT_DXT1:
 			track->textures[i].cpp = 1;
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index b2f9efe..19a7ef7 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -481,6 +481,7 @@
 	if (rdev->flags & RADEON_IS_IGP)
 		base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
@@ -881,6 +882,7 @@
 		case R300_TX_FORMAT_Y4X4:
 		case R300_TX_FORMAT_Z3Y3X2:
 			track->textures[i].cpp = 1;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_X16:
 		case R300_TX_FORMAT_Y8X8:
@@ -892,6 +894,7 @@
 		case R300_TX_FORMAT_B8G8_B8G8:
 		case R300_TX_FORMAT_G8R8_G8B8:
 			track->textures[i].cpp = 2;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_Y16X16:
 		case R300_TX_FORMAT_Z11Y11X10:
@@ -902,14 +905,17 @@
 		case R300_TX_FORMAT_FL_I32:
 		case 0x1e:
 			track->textures[i].cpp = 4;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_W16Z16Y16X16:
 		case R300_TX_FORMAT_FL_R16G16B16A16:
 		case R300_TX_FORMAT_FL_I32A32:
 			track->textures[i].cpp = 8;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_FL_R32G32B32A32:
 			track->textures[i].cpp = 16;
+			track->textures[i].compress_format = R100_TRACK_COMP_NONE;
 			break;
 		case R300_TX_FORMAT_DXT1:
 			track->textures[i].cpp = 1;
@@ -1171,6 +1177,8 @@
 	int r;
 
 	track = kzalloc(sizeof(*track), GFP_KERNEL);
+	if (track == NULL)
+		return -ENOMEM;
 	r100_cs_track_clear(p->rdev, track);
 	p->track = track;
 	do {
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 4415a5e..e6c8914 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -45,9 +45,14 @@
 	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
 	/* low sh */
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 0;
-	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+	/* mid sh */
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 	/* high sh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -58,6 +63,11 @@
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+	/* mid mh */
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 	/* high mh */
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 34330df..694af7c 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -125,6 +125,7 @@
 	r520_vram_get_type(rdev);
 	r100_vram_init_sizes(rdev);
 	radeon_vram_location(rdev, &rdev->mc, 0);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index e14f597..e100f69 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -130,9 +130,14 @@
 							break;
 						}
 					}
-				} else
-					rdev->pm.requested_power_state_index =
-						rdev->pm.current_power_state_index - 1;
+				} else {
+					if (rdev->pm.current_power_state_index == 0)
+						rdev->pm.requested_power_state_index =
+							rdev->pm.num_power_states - 1;
+					else
+						rdev->pm.requested_power_state_index =
+							rdev->pm.current_power_state_index - 1;
+				}
 			}
 			rdev->pm.requested_clock_mode_index = 0;
 			/* don't use the power state if crtcs are active and no display flag is set */
@@ -291,6 +296,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -301,6 +311,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 1;
@@ -317,6 +332,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 2;
@@ -327,6 +347,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 1;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 1;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -343,6 +368,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 3;
@@ -353,6 +383,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 3;
@@ -375,6 +410,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+		/* mid sh */
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
 		/* high sh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -385,6 +425,11 @@
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
 		rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+		/* mid mh */
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+		rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
 		/* high mh */
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
 		rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
@@ -401,7 +446,12 @@
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+			/* mid sh */
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			/* high sh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
@@ -411,7 +461,12 @@
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+			/* low mh */
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = 2;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = 2;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			/* high mh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
@@ -430,14 +485,30 @@
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
 			} else {
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
 				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+			}
+			/* mid sh */
+			if (rdev->flags & RADEON_IS_MOBILITY) {
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
+			} else {
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			}
 			/* high sh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
@@ -453,14 +524,30 @@
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 2;
+				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
 			} else {
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
 					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
 				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 1;
+				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+			}
+			/* mid mh */
+			if (rdev->flags & RADEON_IS_MOBILITY) {
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
+			} else {
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
+					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			}
 			/* high mh */
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
@@ -475,13 +562,18 @@
 
 void r600_pm_misc(struct radeon_device *rdev)
 {
-	int requested_index = rdev->pm.requested_power_state_index;
-	struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
-	struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
 
-	if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
-		radeon_atom_set_voltage(rdev, voltage->voltage);
-
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 bool r600_gui_idle(struct radeon_device *rdev)
@@ -1010,7 +1102,7 @@
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
@@ -1087,6 +1179,7 @@
 		if (rdev->flags & RADEON_IS_IGP)
 			base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
 		radeon_vram_location(rdev, &rdev->mc, base);
+		rdev->mc.gtt_base_align = 0;
 		radeon_gtt_location(rdev, mc);
 	}
 }
@@ -1132,8 +1225,10 @@
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
 	r600_vram_gtt_location(rdev, &rdev->mc);
 
-	if (rdev->flags & RADEON_IS_IGP)
+	if (rdev->flags & RADEON_IS_IGP) {
+		rs690_pm_info(rdev);
 		rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+	}
 	radeon_update_bandwidth_info(rdev);
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index f4fb88e..ca5c29f 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -538,9 +538,12 @@
 r600_prepare_blit_copy(struct drm_device *dev, struct drm_file *file_priv)
 {
 	drm_radeon_private_t *dev_priv = dev->dev_private;
+	int ret;
 	DRM_DEBUG("\n");
 
-	r600_nomm_get_vb(dev);
+	ret = r600_nomm_get_vb(dev);
+	if (ret)
+		return ret;
 
 	dev_priv->blit_vb->file_priv = file_priv;
 
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index c39c1bc..144c32d 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -585,7 +585,7 @@
 	header = radeon_get_ib_value(p, h_idx);
 	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
 	reg = CP_PACKET0_GET_REG(header);
-	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
 		DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -620,7 +620,6 @@
 		ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
 	}
 out:
-	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 5f96fe8..2f94dc6 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -177,6 +177,7 @@
 void radeon_combios_get_power_modes(struct radeon_device *rdev);
 void radeon_atombios_get_power_modes(struct radeon_device *rdev);
 void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
+void rs690_pm_info(struct radeon_device *rdev);
 
 /*
  * Fences.
@@ -350,6 +351,7 @@
 	int			vram_mtrr;
 	bool			vram_is_ddr;
 	bool			igp_sideport_enabled;
+	u64                     gtt_base_align;
 };
 
 bool radeon_combios_sideport_present(struct radeon_device *rdev);
@@ -619,7 +621,8 @@
 	DYNPM_STATE_DISABLED,
 	DYNPM_STATE_MINIMUM,
 	DYNPM_STATE_PAUSED,
-	DYNPM_STATE_ACTIVE
+	DYNPM_STATE_ACTIVE,
+	DYNPM_STATE_SUSPENDED,
 };
 enum radeon_dynpm_action {
 	DYNPM_ACTION_NONE,
@@ -648,15 +651,18 @@
 	PM_PROFILE_DEFAULT,
 	PM_PROFILE_AUTO,
 	PM_PROFILE_LOW,
+	PM_PROFILE_MID,
 	PM_PROFILE_HIGH,
 };
 
 #define PM_PROFILE_DEFAULT_IDX 0
 #define PM_PROFILE_LOW_SH_IDX  1
-#define PM_PROFILE_HIGH_SH_IDX 2
-#define PM_PROFILE_LOW_MH_IDX  3
-#define PM_PROFILE_HIGH_MH_IDX 4
-#define PM_PROFILE_MAX         5
+#define PM_PROFILE_MID_SH_IDX  2
+#define PM_PROFILE_HIGH_SH_IDX 3
+#define PM_PROFILE_LOW_MH_IDX  4
+#define PM_PROFILE_MID_MH_IDX  5
+#define PM_PROFILE_HIGH_MH_IDX 6
+#define PM_PROFILE_MAX         7
 
 struct radeon_pm_profile {
 	int dpms_off_ps_idx;
@@ -745,6 +751,7 @@
 	int                     default_power_state_index;
 	u32                     current_sclk;
 	u32                     current_mclk;
+	u32                     current_vddc;
 	struct radeon_i2c_chan *i2c_bus;
 	/* selected pm method */
 	enum radeon_pm_method     pm_method;
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index 87f7e2c..646f96f 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -780,6 +780,13 @@
 	case CHIP_R423:
 	case CHIP_RV410:
 		rdev->asic = &r420_asic;
+		/* handle macs */
+		if (rdev->bios == NULL) {
+			rdev->asic->get_engine_clock = &radeon_legacy_get_engine_clock;
+			rdev->asic->set_engine_clock = &radeon_legacy_set_engine_clock;
+			rdev->asic->get_memory_clock = &radeon_legacy_get_memory_clock;
+			rdev->asic->set_memory_clock = NULL;
+		}
 		break;
 	case CHIP_RS400:
 	case CHIP_RS480:
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 4305cd5..10673ae 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -280,6 +280,15 @@
 		}
 	}
 
+	/* ASUS HD 3600 board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x9598) &&
+	    (dev->pdev->subsystem_vendor == 0x1043) &&
+	    (dev->pdev->subsystem_device == 0x01e4)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+			*connector_type = DRM_MODE_CONNECTOR_DVII;
+		}
+	}
+
 	/* ASUS HD 3450 board lists the DVI port as HDMI */
 	if ((dev->pdev->device == 0x95C5) &&
 	    (dev->pdev->subsystem_vendor == 0x1043) &&
@@ -1029,8 +1038,15 @@
 				      data_offset);
 		switch (crev) {
 		case 1:
-			if (igp_info->info.ucMemoryType & 0xf0)
-				return true;
+			/* AMD IGPS */
+			if ((rdev->family == CHIP_RS690) ||
+			    (rdev->family == CHIP_RS740)) {
+				if (igp_info->info.ulBootUpMemoryClock)
+					return true;
+			} else {
+				if (igp_info->info.ucMemoryType & 0xf0)
+					return true;
+			}
 			break;
 		case 2:
 			if (igp_info->info_2.ucMemoryType & 0x0f)
@@ -1833,10 +1849,7 @@
 						/* skip invalid modes */
 						if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
 							continue;
-						rdev->pm.power_state[state_index].clock_info[mode_index].voltage.type =
-							VOLTAGE_SW;
-						rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
-							clock_info->usVDDC;
+						/* voltage works differently on IGPs */
 						mode_index++;
 					} else if (ASIC_IS_DCE4(rdev)) {
 						struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO *clock_info =
@@ -1969,6 +1982,7 @@
 
 	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
 	rdev->pm.current_clock_mode_index = 0;
+	rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
 }
 
 void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index fbba938..2c92137 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -48,6 +48,10 @@
 	resource_size_t vram_base;
 	resource_size_t size = 256 * 1024; /* ??? */
 
+	if (!(rdev->flags & RADEON_IS_IGP))
+		if (!radeon_card_posted(rdev))
+			return false;
+
 	rdev->bios = NULL;
 	vram_base = drm_get_resource_start(rdev->ddev, 0);
 	bios = ioremap(vram_base, size);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 102c744..2417d7b 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1411,6 +1411,11 @@
 			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
 		} else
 #endif /* CONFIG_PPC_PMAC */
+#ifdef CONFIG_PPC64
+		if (ASIC_IS_RN50(rdev))
+			rdev->mode_info.connector_table = CT_RN50_POWER;
+		else
+#endif
 			rdev->mode_info.connector_table = CT_GENERIC;
 	}
 
@@ -1853,6 +1858,33 @@
 					    CONNECTOR_OBJECT_ID_SVIDEO,
 					    &hpd);
 		break;
+	case CT_RN50_POWER:
+		DRM_INFO("Connector Table: %d (rn50-power)\n",
+			 rdev->mode_info.connector_table);
+		/* VGA - primary dac */
+		ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_VGA,
+					    &hpd);
+		ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_VGA,
+					    &hpd);
+		break;
 	default:
 		DRM_INFO("Connector table: %d (invalid)\n",
 			 rdev->mode_info.connector_table);
@@ -1906,15 +1938,6 @@
 			return false;
 	}
 
-	/* Some RV100 cards with 2 VGA ports show up with DVI+VGA */
-	if (dev->pdev->device == 0x5159 &&
-	    dev->pdev->subsystem_vendor == 0x1002 &&
-	    dev->pdev->subsystem_device == 0x013a) {
-		if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
-			*legacy_connector = CONNECTOR_CRT_LEGACY;
-
-	}
-
 	/* X300 card with extra non-existent DVI port */
 	if (dev->pdev->device == 0x5B60 &&
 	    dev->pdev->subsystem_vendor == 0x17af &&
@@ -2026,6 +2049,7 @@
 					combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
 				break;
 			default:
+				ddc_i2c.valid = false;
 				break;
 			}
 
@@ -2339,6 +2363,7 @@
 			if (RBIOS8(tv_info + 6) == 'T') {
 				if (radeon_apply_legacy_tv_quirks(dev)) {
 					hpd.hpd = RADEON_HPD_NONE;
+					ddc_i2c.valid = false;
 					radeon_add_legacy_encoder(dev,
 								  radeon_get_encoder_id
 								  (dev,
@@ -2455,7 +2480,7 @@
 	rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
 	rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[0];
 	if ((state_index > 0) &&
-	    (rdev->pm.power_state[0].clock_info[0].voltage.type = VOLTAGE_GPIO))
+	    (rdev->pm.power_state[0].clock_info[0].voltage.type == VOLTAGE_GPIO))
 		rdev->pm.power_state[state_index].clock_info[0].voltage =
 			rdev->pm.power_state[0].clock_info[0].voltage;
 	else
@@ -3017,6 +3042,22 @@
 		combios_write_ram_size(dev);
 	}
 
+	/* quirk for rs4xx HP nx6125 laptop to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS480 &&
+	    rdev->pdev->subsystem_vendor == 0x103c &&
+	    rdev->pdev->subsystem_device == 0x308b)
+		return;
+
+	/* quirk for rs4xx HP dv5000 laptop to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS480 &&
+	    rdev->pdev->subsystem_vendor == 0x103c &&
+	    rdev->pdev->subsystem_device == 0x30a4)
+		return;
+
 	/* DYN CLK 1 */
 	table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
 	if (table)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 0c7ccc6..adccbc2c 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,30 +771,27 @@
 			} else
 				ret = connector_status_connected;
 
-			/* multiple connectors on the same encoder with the same ddc line
-			 * This tends to be HDMI and DVI on the same encoder with the
-			 * same ddc line.  If the edid says HDMI, consider the HDMI port
-			 * connected and the DVI port disconnected.  If the edid doesn't
-			 * say HDMI, vice versa.
+			/* This gets complicated.  We have boards with VGA + HDMI with a
+			 * shared DDC line and we have boards with DVI-D + HDMI with a shared
+			 * DDC line.  The latter is more complex because with DVI<->HDMI adapters
+			 * you don't really know what's connected to which port as both are digital.
 			 */
 			if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
 				struct drm_device *dev = connector->dev;
+				struct radeon_device *rdev = dev->dev_private;
 				struct drm_connector *list_connector;
 				struct radeon_connector *list_radeon_connector;
 				list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) {
 					if (connector == list_connector)
 						continue;
 					list_radeon_connector = to_radeon_connector(list_connector);
-					if (radeon_connector->devices == list_radeon_connector->devices) {
-						if (drm_detect_hdmi_monitor(radeon_connector->edid)) {
-							if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
-								kfree(radeon_connector->edid);
-								radeon_connector->edid = NULL;
-								ret = connector_status_disconnected;
-							}
-						} else {
-							if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
-							    (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+					if (list_radeon_connector->shared_ddc &&
+					    (list_radeon_connector->ddc_bus->rec.i2c_id ==
+					     radeon_connector->ddc_bus->rec.i2c_id)) {
+						/* cases where both connectors are digital */
+						if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+							/* hpd is our only option in this case */
+							if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
 								kfree(radeon_connector->edid);
 								radeon_connector->edid = NULL;
 								ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index b7023ff..4eb67c0 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -194,7 +194,7 @@
 fail:
 	drm_gem_object_unreference_unlocked(obj);
 
-	return 0;
+	return ret;
 }
 
 int radeon_crtc_cursor_move(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f10faed..dd279da 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -226,20 +226,20 @@
 {
 	u64 size_af, size_bf;
 
-	size_af = 0xFFFFFFFF - mc->vram_end;
-	size_bf = mc->vram_start;
+	size_af = ((0xFFFFFFFF - mc->vram_end) + mc->gtt_base_align) & ~mc->gtt_base_align;
+	size_bf = mc->vram_start & ~mc->gtt_base_align;
 	if (size_bf > size_af) {
 		if (mc->gtt_size > size_bf) {
 			dev_warn(rdev->dev, "limiting GTT\n");
 			mc->gtt_size = size_bf;
 		}
-		mc->gtt_start = mc->vram_start - mc->gtt_size;
+		mc->gtt_start = (mc->vram_start & ~mc->gtt_base_align) - mc->gtt_size;
 	} else {
 		if (mc->gtt_size > size_af) {
 			dev_warn(rdev->dev, "limiting GTT\n");
 			mc->gtt_size = size_af;
 		}
-		mc->gtt_start = mc->vram_end + 1;
+		mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
 	}
 	mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
 	dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
@@ -779,6 +779,7 @@
 
 int radeon_resume_kms(struct drm_device *dev)
 {
+	struct drm_connector *connector;
 	struct radeon_device *rdev = dev->dev_private;
 
 	if (rdev->powered_down)
@@ -797,6 +798,12 @@
 	radeon_resume(rdev);
 	radeon_pm_resume(rdev);
 	radeon_restore_bios_scratch_regs(rdev);
+
+	/* turn on display hw */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+	}
+
 	radeon_fbdev_set_suspend(rdev, 0);
 	release_console_sem();
 
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 1006549..8154cdf 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -284,8 +284,7 @@
 	"eDP",
 };
 
-static const char *hpd_names[7] = {
-	"NONE",
+static const char *hpd_names[6] = {
 	"HPD1",
 	"HPD2",
 	"HPD3",
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 902d173..e166fe4 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -45,9 +45,10 @@
  * - 2.2.0 - add r6xx/r7xx const buffer support
  * - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
  * - 2.4.0 - add crtc id query
+ * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	4
+#define KMS_DRIVER_MINOR	5
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 1ebb100..e0b30b2 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1072,6 +1072,8 @@
 	if (is_dig) {
 		switch (mode) {
 		case DRM_MODE_DPMS_ON:
+			if (!ASIC_IS_DCE4(rdev))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
 				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
@@ -1079,8 +1081,6 @@
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
 			}
-			if (!ASIC_IS_DCE4(rdev))
-				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index e192acf..dc1634b 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -363,6 +363,7 @@
 {
 	struct radeon_fbdev *rfbdev;
 	int bpp_sel = 32;
+	int ret;
 
 	/* select 8 bpp console on RN50 or 16MB cards */
 	if (ASIC_IS_RN50(rdev) || rdev->mc.real_vram_size <= (32*1024*1024))
@@ -376,9 +377,14 @@
 	rdev->mode_info.rfbdev = rfbdev;
 	rfbdev->helper.funcs = &radeon_fb_helper_funcs;
 
-	drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
-			   rdev->num_crtc,
-			   RADEONFB_CONN_LIMIT);
+	ret = drm_fb_helper_init(rdev->ddev, &rfbdev->helper,
+				 rdev->num_crtc,
+				 RADEONFB_CONN_LIMIT);
+	if (ret) {
+		kfree(rfbdev);
+		return ret;
+	}
+
 	drm_fb_helper_single_add_all_connectors(&rfbdev->helper);
 	drm_fb_helper_initial_config(&rfbdev->helper, bpp_sel);
 	return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 0406835..ab389f8 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -118,13 +118,18 @@
 		value = rdev->num_z_pipes;
 		break;
 	case RADEON_INFO_ACCEL_WORKING:
-		value = rdev->accel_working;
+		/* xf86-video-ati 6.13.0 relies on this being false for evergreen */
+		if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK))
+			value = false;
+		else
+			value = rdev->accel_working;
 		break;
 	case RADEON_INFO_CRTC_FROM_ID:
 		for (i = 0, found = 0; i < rdev->num_crtc; i++) {
 			crtc = (struct drm_crtc *)minfo->crtcs[i];
 			if (crtc && crtc->base.id == value) {
-				value = i;
+				struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+				value = radeon_crtc->crtc_id;
 				found = 1;
 				break;
 			}
@@ -134,6 +139,9 @@
 			return -EINVAL;
 		}
 		break;
+	case RADEON_INFO_ACCEL_WORKING2:
+		value = rdev->accel_working;
+		break;
 	default:
 		DRM_DEBUG("Invalid request %d\n", info->request);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 5a13b3e..5688a0c 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -108,6 +108,7 @@
 		udelay(panel_pwr_delay * 1000);
 		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
 		WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+		udelay(panel_pwr_delay * 1000);
 		break;
 	}
 
@@ -928,16 +929,14 @@
 	if (ASIC_IS_R300(rdev)) {
 		gpiopad_a = RREG32(RADEON_GPIOPAD_A) | 1;
 		disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
-	}
-
-	if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev))
-		disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
-	else
+	} else if (rdev->family != CHIP_R200)
 		disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
-
-	if (rdev->family == CHIP_R200)
+	else if (rdev->family == CHIP_R200)
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
 
+	if (rdev->family >= CHIP_R200)
+		disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
+
 	if (is_tv) {
 		uint32_t dac_cntl;
 
@@ -1002,15 +1001,13 @@
 	if (ASIC_IS_R300(rdev)) {
 		WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
 		WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
-	}
+	} else if (rdev->family != CHIP_R200)
+		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+	else if (rdev->family == CHIP_R200)
+		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
 
 	if (rdev->family >= CHIP_R200)
 		WREG32(RADEON_DISP_TV_OUT_CNTL, disp_tv_out_cntl);
-	else
-		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
-
-	if (rdev->family == CHIP_R200)
-		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
 
 	if (is_tv)
 		radeon_legacy_tv_mode_set(encoder, mode, adjusted_mode);
@@ -1168,6 +1165,17 @@
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
 	bool color = true;
+	struct drm_crtc *crtc;
+
+	/* find out if crtc2 is in use or if this encoder is using it */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+		if ((radeon_crtc->crtc_id == 1) && crtc->enabled) {
+			if (encoder->crtc != crtc) {
+				return connector_status_disconnected;
+			}
+		}
+	}
 
 	if (connector->connector_type == DRM_MODE_CONNECTOR_SVIDEO ||
 	    connector->connector_type == DRM_MODE_CONNECTOR_Composite ||
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index f2ed27c..0320403 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -642,8 +642,8 @@
 	}
 	flicker_removal = (tmp + 500) / 1000;
 
-	if (flicker_removal < 2)
-		flicker_removal = 2;
+	if (flicker_removal < 3)
+		flicker_removal = 3;
 	for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
 		if (flicker_removal == SLOPE_limit[i])
 			break;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 67358baf..95696aa 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -206,6 +206,7 @@
 	CT_MINI_INTERNAL,
 	CT_IMAC_G5_ISIGHT,
 	CT_EMAC,
+	CT_RN50_POWER,
 };
 
 enum radeon_dvo_chip {
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 0228126..3fa6984 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -33,6 +33,14 @@
 #define RADEON_WAIT_VBLANK_TIMEOUT 200
 #define RADEON_WAIT_IDLE_TIMEOUT 200
 
+static const char *radeon_pm_state_type_name[5] = {
+	"Default",
+	"Powersave",
+	"Battery",
+	"Balanced",
+	"Performance",
+};
+
 static void radeon_dynpm_idle_work_handler(struct work_struct *work);
 static int radeon_debugfs_pm_init(struct radeon_device *rdev);
 static bool radeon_pm_in_vbl(struct radeon_device *rdev);
@@ -84,9 +92,9 @@
 				rdev->pm.profile_index = PM_PROFILE_HIGH_SH_IDX;
 		} else {
 			if (rdev->pm.active_crtc_count > 1)
-				rdev->pm.profile_index = PM_PROFILE_LOW_MH_IDX;
+				rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
 			else
-				rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
+				rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
 		}
 		break;
 	case PM_PROFILE_LOW:
@@ -95,6 +103,12 @@
 		else
 			rdev->pm.profile_index = PM_PROFILE_LOW_SH_IDX;
 		break;
+	case PM_PROFILE_MID:
+		if (rdev->pm.active_crtc_count > 1)
+			rdev->pm.profile_index = PM_PROFILE_MID_MH_IDX;
+		else
+			rdev->pm.profile_index = PM_PROFILE_MID_SH_IDX;
+		break;
 	case PM_PROFILE_HIGH:
 		if (rdev->pm.active_crtc_count > 1)
 			rdev->pm.profile_index = PM_PROFILE_HIGH_MH_IDX;
@@ -127,15 +141,6 @@
 		if (bo->tbo.mem.mem_type == TTM_PL_VRAM)
 			ttm_bo_unmap_virtual(&bo->tbo);
 	}
-
-	if (rdev->gart.table.vram.robj)
-		ttm_bo_unmap_virtual(&rdev->gart.table.vram.robj->tbo);
-
-	if (rdev->stollen_vga_memory)
-		ttm_bo_unmap_virtual(&rdev->stollen_vga_memory->tbo);
-
-	if (rdev->r600_blit.shader_obj)
-		ttm_bo_unmap_virtual(&rdev->r600_blit.shader_obj->tbo);
 }
 
 static void radeon_sync_with_vblank(struct radeon_device *rdev)
@@ -281,6 +286,42 @@
 	mutex_unlock(&rdev->ddev->struct_mutex);
 }
 
+static void radeon_pm_print_states(struct radeon_device *rdev)
+{
+	int i, j;
+	struct radeon_power_state *power_state;
+	struct radeon_pm_clock_info *clock_info;
+
+	DRM_DEBUG("%d Power State(s)\n", rdev->pm.num_power_states);
+	for (i = 0; i < rdev->pm.num_power_states; i++) {
+		power_state = &rdev->pm.power_state[i];
+		DRM_DEBUG("State %d: %s\n", i,
+			radeon_pm_state_type_name[power_state->type]);
+		if (i == rdev->pm.default_power_state_index)
+			DRM_DEBUG("\tDefault");
+		if ((rdev->flags & RADEON_IS_PCIE) && !(rdev->flags & RADEON_IS_IGP))
+			DRM_DEBUG("\t%d PCIE Lanes\n", power_state->pcie_lanes);
+		if (power_state->flags & RADEON_PM_STATE_SINGLE_DISPLAY_ONLY)
+			DRM_DEBUG("\tSingle display only\n");
+		DRM_DEBUG("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
+		for (j = 0; j < power_state->num_clock_modes; j++) {
+			clock_info = &(power_state->clock_info[j]);
+			if (rdev->flags & RADEON_IS_IGP)
+				DRM_DEBUG("\t\t%d e: %d%s\n",
+					j,
+					clock_info->sclk * 10,
+					clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+			else
+				DRM_DEBUG("\t\t%d e: %d\tm: %d\tv: %d%s\n",
+					j,
+					clock_info->sclk * 10,
+					clock_info->mclk * 10,
+					clock_info->voltage.voltage,
+					clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
+		}
+	}
+}
+
 static ssize_t radeon_get_pm_profile(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
@@ -292,6 +333,7 @@
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			(cp == PM_PROFILE_AUTO) ? "auto" :
 			(cp == PM_PROFILE_LOW) ? "low" :
+			(cp == PM_PROFILE_MID) ? "mid" :
 			(cp == PM_PROFILE_HIGH) ? "high" : "default");
 }
 
@@ -311,6 +353,8 @@
 			rdev->pm.profile = PM_PROFILE_AUTO;
 		else if (strncmp("low", buf, strlen("low")) == 0)
 			rdev->pm.profile = PM_PROFILE_LOW;
+		else if (strncmp("mid", buf, strlen("mid")) == 0)
+			rdev->pm.profile = PM_PROFILE_MID;
 		else if (strncmp("high", buf, strlen("high")) == 0)
 			rdev->pm.profile = PM_PROFILE_HIGH;
 		else {
@@ -354,13 +398,20 @@
 		rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
 		mutex_unlock(&rdev->pm.mutex);
 	} else if (strncmp("profile", buf, strlen("profile")) == 0) {
+		bool flush_wq = false;
+
 		mutex_lock(&rdev->pm.mutex);
-		rdev->pm.pm_method = PM_METHOD_PROFILE;
+		if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+			cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+			flush_wq = true;
+		}
 		/* disable dynpm */
 		rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 		rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
-		cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+		rdev->pm.pm_method = PM_METHOD_PROFILE;
 		mutex_unlock(&rdev->pm.mutex);
+		if (flush_wq)
+			flush_workqueue(rdev->wq);
 	} else {
 		DRM_ERROR("invalid power method!\n");
 		goto fail;
@@ -375,17 +426,36 @@
 
 void radeon_pm_suspend(struct radeon_device *rdev)
 {
+	bool flush_wq = false;
+
 	mutex_lock(&rdev->pm.mutex);
-	cancel_delayed_work(&rdev->pm.dynpm_idle_work);
-	rdev->pm.current_power_state_index = -1;
-	rdev->pm.current_clock_mode_index = -1;
-	rdev->pm.current_sclk = 0;
-	rdev->pm.current_mclk = 0;
+	if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+		cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+		if (rdev->pm.dynpm_state == DYNPM_STATE_ACTIVE)
+			rdev->pm.dynpm_state = DYNPM_STATE_SUSPENDED;
+		flush_wq = true;
+	}
 	mutex_unlock(&rdev->pm.mutex);
+	if (flush_wq)
+		flush_workqueue(rdev->wq);
 }
 
 void radeon_pm_resume(struct radeon_device *rdev)
 {
+	/* asic init will reset the default power state */
+	mutex_lock(&rdev->pm.mutex);
+	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+	rdev->pm.current_clock_mode_index = 0;
+	rdev->pm.current_sclk = rdev->clock.default_sclk;
+	rdev->pm.current_mclk = rdev->clock.default_mclk;
+	rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+	if (rdev->pm.pm_method == PM_METHOD_DYNPM
+	    && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
+		rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
+		queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
+	}
+	mutex_unlock(&rdev->pm.mutex);
 	radeon_pm_compute_clocks(rdev);
 }
 
@@ -394,32 +464,24 @@
 	int ret;
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
+	rdev->pm.profile = PM_PROFILE_DEFAULT;
 	rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 	rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
 	rdev->pm.dynpm_can_upclock = true;
 	rdev->pm.dynpm_can_downclock = true;
-	rdev->pm.current_sclk = 0;
-	rdev->pm.current_mclk = 0;
+	rdev->pm.current_sclk = rdev->clock.default_sclk;
+	rdev->pm.current_mclk = rdev->clock.default_mclk;
 
 	if (rdev->bios) {
 		if (rdev->is_atom_bios)
 			radeon_atombios_get_power_modes(rdev);
 		else
 			radeon_combios_get_power_modes(rdev);
+		radeon_pm_print_states(rdev);
 		radeon_pm_init_profile(rdev);
-		rdev->pm.current_power_state_index = -1;
-		rdev->pm.current_clock_mode_index = -1;
 	}
 
 	if (rdev->pm.num_power_states > 1) {
-		if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
-			mutex_lock(&rdev->pm.mutex);
-			rdev->pm.profile = PM_PROFILE_DEFAULT;
-			radeon_pm_update_profile(rdev);
-			radeon_pm_set_clocks(rdev);
-			mutex_unlock(&rdev->pm.mutex);
-		}
-
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);
 		if (ret)
@@ -447,6 +509,8 @@
 void radeon_pm_fini(struct radeon_device *rdev)
 {
 	if (rdev->pm.num_power_states > 1) {
+		bool flush_wq = false;
+
 		mutex_lock(&rdev->pm.mutex);
 		if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
 			rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -454,13 +518,16 @@
 			radeon_pm_set_clocks(rdev);
 		} else if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
 			/* cancel work */
-			cancel_delayed_work_sync(&rdev->pm.dynpm_idle_work);
+			cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+			flush_wq = true;
 			/* reset default clocks */
 			rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
 			rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
 			radeon_pm_set_clocks(rdev);
 		}
 		mutex_unlock(&rdev->pm.mutex);
+		if (flush_wq)
+			flush_workqueue(rdev->wq);
 
 		device_remove_file(rdev->dev, &dev_attr_power_profile);
 		device_remove_file(rdev->dev, &dev_attr_power_method);
@@ -681,12 +748,12 @@
 			radeon_pm_get_dynpm_state(rdev);
 			radeon_pm_set_clocks(rdev);
 		}
+
+		queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
 	}
 	mutex_unlock(&rdev->pm.mutex);
 	ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-
-	queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
-					msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
 }
 
 /*
@@ -705,6 +772,8 @@
 	seq_printf(m, "default memory clock: %u0 kHz\n", rdev->clock.default_mclk);
 	if (rdev->asic->get_memory_clock)
 		seq_printf(m, "current memory clock: %u0 kHz\n", radeon_get_memory_clock(rdev));
+	if (rdev->pm.current_vddc)
+		seq_printf(m, "voltage: %u mV\n", rdev->pm.current_vddc);
 	if (rdev->asic->get_pcie_lanes)
 		seq_printf(m, "PCIE lanes: %d\n", radeon_get_pcie_lanes(rdev));
 
diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen
index b5c757f..f78fd59 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/evergreen
+++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen
@@ -80,8 +80,8 @@
 0x00028010 DB_RENDER_OVERRIDE2
 0x00028028 DB_STENCIL_CLEAR
 0x0002802C DB_DEPTH_CLEAR
-0x00028034 PA_SC_SCREEN_SCISSOR_BR
 0x00028030 PA_SC_SCREEN_SCISSOR_TL
+0x00028034 PA_SC_SCREEN_SCISSOR_BR
 0x0002805C DB_DEPTH_SLICE
 0x00028140 SQ_ALU_CONST_BUFFER_SIZE_PS_0
 0x00028144 SQ_ALU_CONST_BUFFER_SIZE_PS_1
@@ -460,8 +460,8 @@
 0x00028844 SQ_PGM_RESOURCES_PS
 0x00028848 SQ_PGM_RESOURCES_2_PS
 0x0002884C SQ_PGM_EXPORTS_PS
-0x0002885C SQ_PGM_RESOURCES_VS
-0x00028860 SQ_PGM_RESOURCES_2_VS
+0x00028860 SQ_PGM_RESOURCES_VS
+0x00028864 SQ_PGM_RESOURCES_2_VS
 0x00028878 SQ_PGM_RESOURCES_GS
 0x0002887C SQ_PGM_RESOURCES_2_GS
 0x00028890 SQ_PGM_RESOURCES_ES
@@ -469,8 +469,8 @@
 0x000288A8 SQ_PGM_RESOURCES_FS
 0x000288BC SQ_PGM_RESOURCES_HS
 0x000288C0 SQ_PGM_RESOURCES_2_HS
-0x000288D0 SQ_PGM_RESOURCES_LS
-0x000288D4 SQ_PGM_RESOURCES_2_LS
+0x000288D4 SQ_PGM_RESOURCES_LS
+0x000288D8 SQ_PGM_RESOURCES_2_LS
 0x000288E8 SQ_LDS_ALLOC
 0x000288EC SQ_LDS_ALLOC_PS
 0x000288F0 SQ_VTX_SEMANTIC_CLEAR
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9e4240b..f454c9a 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -57,7 +57,9 @@
 	}
 	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
 		/* FIXME: RS400 & RS480 seems to have issue with GART size
-		 * if 4G of system memory (needs more testing) */
+		 * if 4G of system memory (needs more testing)
+		 */
+		/* XXX is this still an issue with proper alignment? */
 		rdev->mc.gtt_size = 32 * 1024 * 1024;
 		DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
 	}
@@ -263,6 +265,7 @@
 	r100_vram_init_sizes(rdev);
 	base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 7bb4c3e..6dc15ea 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -698,6 +698,7 @@
 	base = G_000004_MC_FB_START(base) << 16;
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = 0;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index bcc3319..ce4ecbe 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -79,7 +79,13 @@
 			tmp.full = dfixed_const(100);
 			rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info.ulBootUpMemoryClock);
 			rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
-			rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+			if (info->info.usK8MemoryClock)
+				rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+			else if (rdev->clock.default_mclk) {
+				rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+				rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
+			} else
+				rdev->pm.igp_system_mclk.full = dfixed_const(400);
 			rdev->pm.igp_ht_link_clk.full = dfixed_const(le16_to_cpu(info->info.usFSBClock));
 			rdev->pm.igp_ht_link_width.full = dfixed_const(info->info.ucHTLinkWidth);
 			break;
@@ -87,34 +93,31 @@
 			tmp.full = dfixed_const(100);
 			rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info_v2.ulBootUpSidePortClock);
 			rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
-			rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+			if (info->info_v2.ulBootUpUMAClock)
+				rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+			else if (rdev->clock.default_mclk)
+				rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+			else
+				rdev->pm.igp_system_mclk.full = dfixed_const(66700);
 			rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
 			rdev->pm.igp_ht_link_clk.full = dfixed_const(info->info_v2.ulHTLinkFreq);
 			rdev->pm.igp_ht_link_clk.full = dfixed_div(rdev->pm.igp_ht_link_clk, tmp);
 			rdev->pm.igp_ht_link_width.full = dfixed_const(le16_to_cpu(info->info_v2.usMinHTLinkWidth));
 			break;
 		default:
-			tmp.full = dfixed_const(100);
 			/* We assume the slower possible clock ie worst case */
-			/* DDR 333Mhz */
-			rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
-			/* FIXME: system clock ? */
-			rdev->pm.igp_system_mclk.full = dfixed_const(100);
-			rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
-			rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+			rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+			rdev->pm.igp_system_mclk.full = dfixed_const(200);
+			rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
 			rdev->pm.igp_ht_link_width.full = dfixed_const(8);
 			DRM_ERROR("No integrated system info for your GPU, using safe default\n");
 			break;
 		}
 	} else {
-		tmp.full = dfixed_const(100);
 		/* We assume the slower possible clock ie worst case */
-		/* DDR 333Mhz */
-		rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
-		/* FIXME: system clock ? */
-		rdev->pm.igp_system_mclk.full = dfixed_const(100);
-		rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
-		rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+		rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+		rdev->pm.igp_system_mclk.full = dfixed_const(200);
+		rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
 		rdev->pm.igp_ht_link_width.full = dfixed_const(8);
 		DRM_ERROR("No integrated system info for your GPU, using safe default\n");
 	}
@@ -159,6 +162,7 @@
 	rs690_pm_info(rdev);
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
+	rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
 	radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
 }
@@ -228,10 +232,6 @@
 	fixed20_12 a, b, c;
 	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
 	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
-	/* FIXME: detect IGP with sideport memory, i don't think there is any
-	 * such product available
-	 */
-	bool sideport = false;
 
 	if (!crtc->base.enabled) {
 		/* FIXME: wouldn't it better to set priority mark to maximum */
@@ -300,7 +300,7 @@
 
 	/* Maximun bandwidth is the minimun bandwidth of all component */
 	rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
-	if (sideport) {
+	if (rdev->mc.igp_sideport_enabled) {
 		if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
 			rdev->pm.sideport_bandwidth.full)
 			rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7d9a7b0..0c9c169 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -195,6 +195,7 @@
 	rv515_vram_get_type(rdev);
 	r100_vram_init_sizes(rdev);
 	radeon_vram_location(rdev, &rdev->mc, 0);
+	rdev->mc.gtt_base_align = 0;
 	if (!(rdev->flags & RADEON_IS_AGP))
 		radeon_gtt_location(rdev, &rdev->mc);
 	radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 33952da..b7fd820 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -44,12 +44,18 @@
 
 void rv770_pm_misc(struct radeon_device *rdev)
 {
-	int requested_index = rdev->pm.requested_power_state_index;
-	struct radeon_power_state *ps = &rdev->pm.power_state[requested_index];
-	struct radeon_voltage *voltage = &ps->clock_info[0].voltage;
+	int req_ps_idx = rdev->pm.requested_power_state_index;
+	int req_cm_idx = rdev->pm.requested_clock_mode_index;
+	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
+	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
 
-	if ((voltage->type == VOLTAGE_SW) && voltage->voltage)
-		radeon_atom_set_voltage(rdev, voltage->voltage);
+	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+		if (voltage->voltage != rdev->pm.current_vddc) {
+			radeon_atom_set_voltage(rdev, voltage->voltage);
+			rdev->pm.current_vddc = voltage->voltage;
+			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+		}
+	}
 }
 
 /*
@@ -218,7 +224,7 @@
 	WREG32(MC_VM_FB_LOCATION, tmp);
 	WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
 	WREG32(HDP_NONSURFACE_INFO, (2 << 7));
-	WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+	WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
 	if (rdev->flags & RADEON_IS_AGP) {
 		WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
 		WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index ef91069..ca90479 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -40,11 +40,13 @@
 #include <linux/slab.h>
 
 #include <asm/atomic.h>
-#include <asm/agp.h>
 
 #include "ttm/ttm_bo_driver.h"
 #include "ttm/ttm_page_alloc.h"
 
+#ifdef TTM_HAS_AGP
+#include <asm/agp.h>
+#endif
 
 #define NUM_PAGES_TO_ALLOC		(PAGE_SIZE/sizeof(struct page *))
 #define SMALL_ALLOCATION		16
@@ -104,7 +106,6 @@
 struct ttm_pool_manager {
 	struct kobject		kobj;
 	struct shrinker		mm_shrink;
-	atomic_t		page_alloc_inited;
 	struct ttm_pool_opts	options;
 
 	union {
@@ -142,7 +143,7 @@
 {
 	struct ttm_pool_manager *m =
 		container_of(kobj, struct ttm_pool_manager, kobj);
-	(void)m;
+	kfree(m);
 }
 
 static ssize_t ttm_pool_store(struct kobject *kobj,
@@ -214,9 +215,7 @@
 	.default_attrs = ttm_pool_attrs,
 };
 
-static struct ttm_pool_manager _manager = {
-	.page_alloc_inited	= ATOMIC_INIT(0)
-};
+static struct ttm_pool_manager *_manager;
 
 #ifndef CONFIG_X86
 static int set_pages_array_wb(struct page **pages, int addrinarray)
@@ -271,7 +270,7 @@
 	if (flags & TTM_PAGE_FLAG_DMA32)
 		pool_index |= 0x2;
 
-	return &_manager.pools[pool_index];
+	return &_manager->pools[pool_index];
 }
 
 /* set memory back to wb and free the pages. */
@@ -387,7 +386,7 @@
 	unsigned i;
 	int total = 0;
 	for (i = 0; i < NUM_POOLS; ++i)
-		total += _manager.pools[i].npages;
+		total += _manager->pools[i].npages;
 
 	return total;
 }
@@ -395,7 +394,7 @@
 /**
  * Callback for mm to request pool to reduce number of page held.
  */
-static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
+static int ttm_pool_mm_shrink(struct shrinker *shrink, int shrink_pages, gfp_t gfp_mask)
 {
 	static atomic_t start_pool = ATOMIC_INIT(0);
 	unsigned i;
@@ -408,7 +407,7 @@
 		unsigned nr_free = shrink_pages;
 		if (shrink_pages == 0)
 			break;
-		pool = &_manager.pools[(i + pool_offset)%NUM_POOLS];
+		pool = &_manager->pools[(i + pool_offset)%NUM_POOLS];
 		shrink_pages = ttm_page_pool_free(pool, nr_free);
 	}
 	/* return estimated number of unused pages in pool */
@@ -576,10 +575,10 @@
 
 	/* If allocation request is small and there is not enough
 	 * pages in pool we fill the pool first */
-	if (count < _manager.options.small
+	if (count < _manager->options.small
 		&& count > pool->npages) {
 		struct list_head new_pages;
-		unsigned alloc_size = _manager.options.alloc_size;
+		unsigned alloc_size = _manager->options.alloc_size;
 
 		/**
 		 * Can't change page caching if in irqsave context. We have to
@@ -667,7 +666,7 @@
 {
 	struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
 	struct page *p = NULL;
-	int gfp_flags = 0;
+	int gfp_flags = GFP_USER;
 	int r;
 
 	/* set zero flag for page allocation if required */
@@ -759,8 +758,8 @@
 	pool->npages += page_count;
 	/* Check that we don't go over the pool limit */
 	page_count = 0;
-	if (pool->npages > _manager.options.max_size) {
-		page_count = pool->npages - _manager.options.max_size;
+	if (pool->npages > _manager->options.max_size) {
+		page_count = pool->npages - _manager->options.max_size;
 		/* free at least NUM_PAGES_TO_ALLOC number of pages
 		 * to reduce calls to set_memory_wb */
 		if (page_count < NUM_PAGES_TO_ALLOC)
@@ -785,33 +784,36 @@
 int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages)
 {
 	int ret;
-	if (atomic_add_return(1, &_manager.page_alloc_inited) > 1)
-		return 0;
+
+	WARN_ON(_manager);
 
 	printk(KERN_INFO TTM_PFX "Initializing pool allocator.\n");
 
-	ttm_page_pool_init_locked(&_manager.wc_pool, GFP_HIGHUSER, "wc");
+	_manager = kzalloc(sizeof(*_manager), GFP_KERNEL);
 
-	ttm_page_pool_init_locked(&_manager.uc_pool, GFP_HIGHUSER, "uc");
+	ttm_page_pool_init_locked(&_manager->wc_pool, GFP_HIGHUSER, "wc");
 
-	ttm_page_pool_init_locked(&_manager.wc_pool_dma32, GFP_USER | GFP_DMA32,
-			"wc dma");
+	ttm_page_pool_init_locked(&_manager->uc_pool, GFP_HIGHUSER, "uc");
 
-	ttm_page_pool_init_locked(&_manager.uc_pool_dma32, GFP_USER | GFP_DMA32,
-			"uc dma");
+	ttm_page_pool_init_locked(&_manager->wc_pool_dma32,
+				  GFP_USER | GFP_DMA32, "wc dma");
 
-	_manager.options.max_size = max_pages;
-	_manager.options.small = SMALL_ALLOCATION;
-	_manager.options.alloc_size = NUM_PAGES_TO_ALLOC;
+	ttm_page_pool_init_locked(&_manager->uc_pool_dma32,
+				  GFP_USER | GFP_DMA32, "uc dma");
 
-	kobject_init(&_manager.kobj, &ttm_pool_kobj_type);
-	ret = kobject_add(&_manager.kobj, &glob->kobj, "pool");
+	_manager->options.max_size = max_pages;
+	_manager->options.small = SMALL_ALLOCATION;
+	_manager->options.alloc_size = NUM_PAGES_TO_ALLOC;
+
+	ret = kobject_init_and_add(&_manager->kobj, &ttm_pool_kobj_type,
+				   &glob->kobj, "pool");
 	if (unlikely(ret != 0)) {
-		kobject_put(&_manager.kobj);
+		kobject_put(&_manager->kobj);
+		_manager = NULL;
 		return ret;
 	}
 
-	ttm_pool_mm_shrink_init(&_manager);
+	ttm_pool_mm_shrink_init(_manager);
 
 	return 0;
 }
@@ -820,16 +822,14 @@
 {
 	int i;
 
-	if (atomic_sub_return(1, &_manager.page_alloc_inited) > 0)
-		return;
-
 	printk(KERN_INFO TTM_PFX "Finalizing pool allocator.\n");
-	ttm_pool_mm_shrink_fini(&_manager);
+	ttm_pool_mm_shrink_fini(_manager);
 
 	for (i = 0; i < NUM_POOLS; ++i)
-		ttm_page_pool_free(&_manager.pools[i], FREE_ALL_PAGES);
+		ttm_page_pool_free(&_manager->pools[i], FREE_ALL_PAGES);
 
-	kobject_put(&_manager.kobj);
+	kobject_put(&_manager->kobj);
+	_manager = NULL;
 }
 
 int ttm_page_alloc_debugfs(struct seq_file *m, void *data)
@@ -837,14 +837,14 @@
 	struct ttm_page_pool *p;
 	unsigned i;
 	char *h[] = {"pool", "refills", "pages freed", "size"};
-	if (atomic_read(&_manager.page_alloc_inited) == 0) {
+	if (!_manager) {
 		seq_printf(m, "No pool allocator running.\n");
 		return 0;
 	}
 	seq_printf(m, "%6s %12s %13s %8s\n",
 			h[0], h[1], h[2], h[3]);
 	for (i = 0; i < NUM_POOLS; ++i) {
-		p = &_manager.pools[i];
+		p = &_manager->pools[i];
 
 		seq_printf(m, "%6s %12ld %13ld %8d\n",
 				p->name, p->nrefills,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index bdd67cf..8e39685 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -644,6 +644,7 @@
 	ret = copy_from_user(cmd, user_cmd, arg->command_size);
 
 	if (unlikely(ret != 0)) {
+		ret = -EFAULT;
 		DRM_ERROR("Failed copying commands.\n");
 		goto out_commit;
 	}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index f1d6261..437ac78 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -972,6 +972,7 @@
 	ret = copy_from_user(rects, user_rects, rects_size);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Failed to get rects.\n");
+		ret = -EFAULT;
 		goto out_free;
 	}
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index f8fbbc6..8612378 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -597,8 +597,10 @@
 
 	ret = copy_from_user(srf->sizes, user_sizes,
 			     srf->num_sizes * sizeof(*srf->sizes));
-	if (unlikely(ret != 0))
+	if (unlikely(ret != 0)) {
+		ret = -EFAULT;
 		goto out_err1;
+	}
 
 	if (srf->scanout &&
 	    srf->num_sizes == 1 &&
@@ -697,9 +699,11 @@
 	if (user_sizes)
 		ret = copy_to_user(user_sizes, srf->sizes,
 				   srf->num_sizes * sizeof(*srf->sizes));
-	if (unlikely(ret != 0))
+	if (unlikely(ret != 0)) {
 		DRM_ERROR("copy_to_user failed %p %u\n",
 			  user_sizes, srf->num_sizes);
+		ret = -EFAULT;
+	}
 out_bad_resource:
 out_no_reference:
 	ttm_base_object_unref(&base);
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 132278f..4340993 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -358,6 +358,7 @@
 config HID_ROCCAT_KONE
 	tristate "Roccat Kone Mouse support"
 	depends on USB_HID
+	select HID_ROCCAT
 	---help---
 	Support for Roccat Kone mouse.
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index aa0f7dc..866e54e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1337,6 +1337,24 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
@@ -1760,7 +1778,8 @@
 
 	/* we need to kill them here, otherwise they will stay allocated to
 	 * wait for coming driver */
-	if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev))
+	if (!(hdev->quirks & HID_QUIRK_NO_IGNORE)
+            && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
 		return -ENODEV;
 
 	/* XXX hack, any other cleaner solution after the driver core
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index c940267..850d02a 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -949,8 +949,8 @@
 	int ret = 0, len;
 	DECLARE_WAITQUEUE(wait, current);
 
+	mutex_lock(&list->read_mutex);
 	while (ret == 0) {
-		mutex_lock(&list->read_mutex);
 		if (list->head == list->tail) {
 			add_wait_queue(&list->hdev->debug_wait, &wait);
 			set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6af77ed..31601ee 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -134,6 +134,7 @@
 #define USB_VENDOR_ID_CH		0x068e
 #define USB_DEVICE_ID_CH_PRO_PEDALS	0x00f2
 #define USB_DEVICE_ID_CH_COMBATSTICK	0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE       0x0051
 #define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE	0x00ff
 #define USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK	0x00d3
 
@@ -369,6 +370,8 @@
 #define USB_DEVICE_ID_MS_PRESENTER_8K_BT	0x0701
 #define USB_DEVICE_ID_MS_PRESENTER_8K_USB	0x0713
 
+#define USB_VENDOR_ID_MOJO		0x8282
+#define USB_DEVICE_ID_RETRO_ADAPTER	0x3201
 
 #define USB_VENDOR_ID_MONTEREY		0x0566
 #define USB_DEVICE_ID_GENIUS_KB29E	0x3004
@@ -391,6 +394,24 @@
 
 #define USB_VENDOR_ID_NTRIG                0x1b96
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN   0x0001
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1   0x0003
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2   0x0004
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3   0x0005
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4   0x0006
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5   0x0007
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6   0x0008
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7   0x0009
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8   0x000A
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9   0x000B
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10   0x000C
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11   0x000D
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12   0x000E
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13   0x000F
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14   0x0010
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15   0x0011
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16   0x0012
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17   0x0013
+#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18   0x0014
 
 #define USB_VENDOR_ID_ONTRAK		0x0a07
 #define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index b6b0cae..fb69b8c 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -868,6 +868,42 @@
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18),
+		.driver_data = NTRIG_DUPLICATE_USAGES },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 1ebd324..b729c02 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -827,14 +827,21 @@
 				ret++;
 		}
 	} else {
+		int skipped_report_id = 0;
+		if (buf[0] == 0x0) {
+			/* Don't send the Report ID */
+			buf++;
+			count--;
+			skipped_report_id = 1;
+		}
 		ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			HID_REQ_SET_REPORT,
 			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			((report_type + 1) << 8) | *buf,
-			interface->desc.bInterfaceNumber, buf + 1, count - 1,
+			interface->desc.bInterfaceNumber, buf, count,
 			USB_CTRL_SET_TIMEOUT);
-		/* count also the report id */
-		if (ret > 0)
+		/* count also the report id, if this was a numbered report. */
+		if (ret > 0 && skipped_report_id)
 			ret++;
 	}
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5ff8d32..5f5aa39 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -34,6 +34,7 @@
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
@@ -56,6 +57,7 @@
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 2988da1..05344af 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -53,6 +53,7 @@
 	struct mutex update_lock;
 	const char *name;
 	u32 id;
+	u16 core_id;
 	char valid;		/* zero until following fields are valid */
 	unsigned long last_updated;	/* in jiffies */
 	int temp;
@@ -75,7 +76,7 @@
 	if (attr->index == SHOW_NAME)
 		ret = sprintf(buf, "%s\n", data->name);
 	else	/* show label */
-		ret = sprintf(buf, "Core %d\n", data->id);
+		ret = sprintf(buf, "Core %d\n", data->core_id);
 	return ret;
 }
 
@@ -304,6 +305,9 @@
 	}
 
 	data->id = pdev->id;
+#ifdef CONFIG_SMP
+	data->core_id = c->cpu_core_id;
+#endif
 	data->name = "coretemp";
 	mutex_init(&data->update_lock);
 
@@ -405,6 +409,10 @@
 	struct list_head list;
 	struct platform_device *pdev;
 	unsigned int cpu;
+#ifdef CONFIG_SMP
+	u16 phys_proc_id;
+	u16 cpu_core_id;
+#endif
 };
 
 static LIST_HEAD(pdev_list);
@@ -415,6 +423,22 @@
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+	mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+	/* Skip second HT entry of each core */
+	list_for_each_entry(pdev_entry, &pdev_list, list) {
+		if (c->phys_proc_id == pdev_entry->phys_proc_id &&
+		    c->cpu_core_id == pdev_entry->cpu_core_id) {
+			err = 0;	/* Not an error */
+			goto exit;
+		}
+	}
+#endif
 
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
@@ -438,7 +462,10 @@
 
 	pdev_entry->pdev = pdev;
 	pdev_entry->cpu = cpu;
-	mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+	pdev_entry->phys_proc_id = c->phys_proc_id;
+	pdev_entry->cpu_core_id = c->cpu_core_id;
+#endif
 	list_add_tail(&pdev_entry->list, &pdev_list);
 	mutex_unlock(&pdev_list_mutex);
 
@@ -449,6 +476,7 @@
 exit_device_put:
 	platform_device_put(pdev);
 exit:
+	mutex_unlock(&pdev_list_mutex);
 	return err;
 }
 
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index e880e2c..9379834 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -289,6 +289,7 @@
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_label;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -303,6 +304,7 @@
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_temp;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -318,6 +320,7 @@
 			iattr->s_attr.dev_attr.show = show_amb_min;
 			iattr->s_attr.dev_attr.store = store_amb_min;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -333,6 +336,7 @@
 			iattr->s_attr.dev_attr.show = show_amb_mid;
 			iattr->s_attr.dev_attr.store = store_amb_mid;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -348,6 +352,7 @@
 			iattr->s_attr.dev_attr.show = show_amb_max;
 			iattr->s_attr.dev_attr.store = store_amb_max;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
@@ -362,6 +367,7 @@
 			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
 			iattr->s_attr.dev_attr.show = show_amb_alarm;
 			iattr->s_attr.index = k;
+			sysfs_attr_init(&iattr->s_attr.dev_attr.attr);
 			res = device_create_file(&pdev->dev,
 						 &iattr->s_attr.dev_attr);
 			if (res)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5be09c0..25763d2 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -80,6 +80,13 @@
 	return inb(VAL);
 }
 
+static inline void
+superio_outb(int reg, int val)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
 static int superio_inw(int reg)
 {
 	int val;
@@ -1517,6 +1524,21 @@
 			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
 
 		reg = superio_inb(IT87_SIO_PINX2_REG);
+		/*
+		 * The IT8720F has no VIN7 pin, so VCCH should always be
+		 * routed internally to VIN7 with an internal divider.
+		 * Curiously, there still is a configuration bit to control
+		 * this, which means it can be set incorrectly. And even
+		 * more curiously, many boards out there are improperly
+		 * configured, even though the IT8720F datasheet claims
+		 * that the internal routing of VCCH to VIN7 is the default
+		 * setting. So we force the internal routing in this case.
+		 */
+		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
+			reg |= (1 << 1);
+			superio_outb(IT87_SIO_PINX2_REG, reg);
+			pr_notice("it87: Routing internal VCCH to in7\n");
+		}
 		if (reg & (1 << 0))
 			pr_info("it87: in3 is VCC (+5V)\n");
 		if (reg & (1 << 1))
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 099a213..da5a240 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -112,11 +112,21 @@
 	if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
 		return false;
 
-	/* Differentiate between AM2+ (bad) and AM3 (good) */
+	/* DDR3 memory implies socket AM3, which is good */
 	pci_bus_read_config_dword(pdev->bus,
 				  PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
 				  REG_DCT0_CONFIG_HIGH, &reg_dram_cfg);
-	return !(reg_dram_cfg & DDR3_MODE);
+	if (reg_dram_cfg & DDR3_MODE)
+		return false;
+
+	/*
+	 * Unfortunately it is possible to run a socket AM3 CPU with DDR2
+	 * memory. We blacklist all the cores which do exist in socket AM2+
+	 * format. It still isn't perfect, as RB-C2 cores exist in both AM2+
+	 * and AM3 formats, but that's the best we can do.
+	 */
+	return boot_cpu_data.x86_model < 4 ||
+	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
 }
 
 static int __devinit k10temp_probe(struct pci_dev *pdev,
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 0ceb6d6..8bdf80d 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -120,7 +120,7 @@
 	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
-	if (data->swap_core_select)
+	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
 		core = core ? 0 : 1;
 
 	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
@@ -180,11 +180,13 @@
 		}
 
 		if ((model >= 0x69) &&
-		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
+		      model == 0x6b || model == 0x6f || model == 0x7f)) {
 			/*
-			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
-			 * need additional offset, otherwise reported
-			 * temperature is below ambient temperature
+			 * RevG desktop CPUs (i.e. no socket S1G1 or
+			 * ASB1 parts) need additional offset,
+			 * otherwise reported temperature is below
+			 * ambient temperature
 			 */
 			data->temp_offset = 21000;
 		}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index f4b21f2..c600811 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -655,7 +655,7 @@
 		/* & ~0x80, ignore enabled/disabled bit */
 		if ((type & ~0x80) != dmi_devices[i].type)
 			continue;
-		if (strcmp(name, dmi_devices[i].name))
+		if (strcasecmp(name, dmi_devices[i].name))
 			continue;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
@@ -704,9 +704,6 @@
 {
 	unsigned char temp;
 	int err, i;
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	const char *vendor;
-#endif
 
 	I801_dev = dev;
 	i801_features = 0;
@@ -808,8 +805,7 @@
 	}
 #endif
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
-	vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-	if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
+	if (dmi_name_in_vendors("FUJITSU"))
 		dmi_walk(dmi_check_onboard_devices, &i801_adapter);
 #endif
 
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 3d76a18..0fe505d 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -94,7 +94,7 @@
 		}
 		break;
 	default:
-		return -1;      /* XXXKW better error code? */
+		return -EOPNOTSUPP;
 	}
 
 	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
@@ -104,7 +104,7 @@
 	if (error & M_SMB_ERROR) {
 		/* Clear error bit by writing a 1 */
 		csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
-		return -1;      /* XXXKW better error code? */
+		return (error & M_SMB_ERROR_TYPE) ? -EIO : -ENXIO;
 	}
 
 	if (data_bytes == 1)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 1cca263..0815e10 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1428,13 +1428,12 @@
 	if (!(adapter->class & driver->class))
 		goto exit_free;
 
-	/* Stop here if we can't use SMBUS_QUICK */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+	/* Stop here if the bus doesn't support probing */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
 		if (address_list[0] == I2C_CLIENT_END)
 			goto exit_free;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_warn(&adapter->dev, "Probing not supported\n");
 		err = -EOPNOTSUPP;
 		goto exit_free;
 	}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 30ce0a8..855ee44 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -969,7 +969,8 @@
 		goto err;
 	goto out;
 err:
-	abort_connection(ep, skb, GFP_KERNEL);
+	state_set(&ep->com, ABORTING);
+	send_abort(ep, skb, GFP_KERNEL);
 out:
 	connect_reply_upcall(ep, err);
 	return;
@@ -1372,7 +1373,7 @@
 				    pdev, 0);
 		mtu = pdev->mtu;
 		tx_chan = cxgb4_port_chan(pdev);
-		smac_idx = tx_chan << 1;
+		smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(pdev) * step;
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1383,7 +1384,7 @@
 					dst->neighbour->dev, 0);
 		mtu = dst_mtu(dst);
 		tx_chan = cxgb4_port_chan(dst->neighbour->dev);
-		smac_idx = tx_chan << 1;
+		smac_idx = (cxgb4_port_viid(dst->neighbour->dev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(dst->neighbour->dev) * step;
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
@@ -1950,7 +1951,7 @@
 					pdev, 0);
 		ep->mtu = pdev->mtu;
 		ep->tx_chan = cxgb4_port_chan(pdev);
-		ep->smac_idx = ep->tx_chan << 1;
+		ep->smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
 		step = ep->com.dev->rdev.lldi.ntxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->txq_idx = cxgb4_port_idx(pdev) * step;
@@ -1965,7 +1966,8 @@
 					ep->dst->neighbour->dev, 0);
 		ep->mtu = dst_mtu(ep->dst);
 		ep->tx_chan = cxgb4_port_chan(ep->dst->neighbour->dev);
-		ep->smac_idx = ep->tx_chan << 1;
+		ep->smac_idx = (cxgb4_port_viid(ep->dst->neighbour->dev) &
+				0x7F) << 1;
 		step = ep->com.dev->rdev.lldi.ntxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->txq_idx = cxgb4_port_idx(ep->dst->neighbour->dev) * step;
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 2447f52..fac5c6e 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -77,7 +77,7 @@
 	kfree(cq->sw_queue);
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  cq->memsize, cq->queue,
-			  pci_unmap_addr(cq, mapping));
+			  dma_unmap_addr(cq, mapping));
 	c4iw_put_cqid(rdev, cq->cqid, uctx);
 	return ret;
 }
@@ -112,7 +112,7 @@
 		ret = -ENOMEM;
 		goto err3;
 	}
-	pci_unmap_addr_set(cq, mapping, cq->dma_addr);
+	dma_unmap_addr_set(cq, mapping, cq->dma_addr);
 	memset(cq->queue, 0, cq->memsize);
 
 	/* build fw_ri_res_wr */
@@ -179,7 +179,7 @@
 	return 0;
 err4:
 	dma_free_coherent(&rdev->lldi.pdev->dev, cq->memsize, cq->queue,
-			  pci_unmap_addr(cq, mapping));
+			  dma_unmap_addr(cq, mapping));
 err3:
 	kfree(cq->sw_queue);
 err2:
@@ -764,7 +764,7 @@
 	struct c4iw_create_cq_resp uresp;
 	struct c4iw_ucontext *ucontext = NULL;
 	int ret;
-	size_t memsize;
+	size_t memsize, hwentries;
 	struct c4iw_mm_entry *mm, *mm2;
 
 	PDBG("%s ib_dev %p entries %d\n", __func__, ibdev, entries);
@@ -788,14 +788,29 @@
 	 * entries must be multiple of 16 for HW.
 	 */
 	entries = roundup(entries, 16);
-	memsize = entries * sizeof *chp->cq.queue;
+
+	/*
+	 * Make actual HW queue 2x to avoid cdix_inc overflows.
+	 */
+	hwentries = entries * 2;
+
+	/*
+	 * Make HW queue at least 64 entries so GTS updates aren't too
+	 * frequent.
+	 */
+	if (hwentries < 64)
+		hwentries = 64;
+
+	memsize = hwentries * sizeof *chp->cq.queue;
 
 	/*
 	 * memsize must be a multiple of the page size if its a user cq.
 	 */
-	if (ucontext)
+	if (ucontext) {
 		memsize = roundup(memsize, PAGE_SIZE);
-	chp->cq.size = entries;
+		hwentries = memsize / sizeof *chp->cq.queue;
+	}
+	chp->cq.size = hwentries;
 	chp->cq.memsize = memsize;
 
 	ret = create_cq(&rhp->rdev, &chp->cq,
@@ -805,7 +820,7 @@
 
 	chp->rhp = rhp;
 	chp->cq.size--;				/* status page */
-	chp->ibcq.cqe = chp->cq.size - 1;
+	chp->ibcq.cqe = entries - 2;
 	spin_lock_init(&chp->lock);
 	atomic_set(&chp->refcnt, 1);
 	init_waitqueue_head(&chp->wait);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 277ab58..d33e1a6 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -261,7 +261,7 @@
 
 struct c4iw_fr_page_list {
 	struct ib_fast_reg_page_list ibpl;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	dma_addr_t dma_addr;
 	struct c4iw_dev *dev;
 	int size;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 7f94da1..82b5703 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -764,7 +764,7 @@
 	if (!c4pl)
 		return ERR_PTR(-ENOMEM);
 
-	pci_unmap_addr_set(c4pl, mapping, dma_addr);
+	dma_unmap_addr_set(c4pl, mapping, dma_addr);
 	c4pl->dma_addr = dma_addr;
 	c4pl->dev = dev;
 	c4pl->size = size;
@@ -779,7 +779,7 @@
 	struct c4iw_fr_page_list *c4pl = to_c4iw_fr_page_list(ibpl);
 
 	dma_free_coherent(&c4pl->dev->rdev.lldi.pdev->dev, c4pl->size,
-			  c4pl, pci_unmap_addr(c4pl, mapping));
+			  c4pl, dma_unmap_addr(c4pl, mapping));
 }
 
 int c4iw_dereg_mr(struct ib_mr *ib_mr)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 0c28ed1e..7065cb3 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -40,10 +40,10 @@
 	 */
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->rq.memsize, wq->rq.queue,
-			  pci_unmap_addr(&wq->rq, mapping));
+			  dma_unmap_addr(&wq->rq, mapping));
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->sq.memsize, wq->sq.queue,
-			  pci_unmap_addr(&wq->sq, mapping));
+			  dma_unmap_addr(&wq->sq, mapping));
 	c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
 	kfree(wq->rq.sw_rq);
 	kfree(wq->sq.sw_sq);
@@ -99,7 +99,7 @@
 	if (!wq->sq.queue)
 		goto err5;
 	memset(wq->sq.queue, 0, wq->sq.memsize);
-	pci_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
+	dma_unmap_addr_set(&wq->sq, mapping, wq->sq.dma_addr);
 
 	wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
 					  wq->rq.memsize, &(wq->rq.dma_addr),
@@ -112,7 +112,7 @@
 		wq->rq.queue,
 		(unsigned long long)virt_to_phys(wq->rq.queue));
 	memset(wq->rq.queue, 0, wq->rq.memsize);
-	pci_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
+	dma_unmap_addr_set(&wq->rq, mapping, wq->rq.dma_addr);
 
 	wq->db = rdev->lldi.db_reg;
 	wq->gts = rdev->lldi.gts_reg;
@@ -217,11 +217,11 @@
 err7:
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->rq.memsize, wq->rq.queue,
-			  pci_unmap_addr(&wq->rq, mapping));
+			  dma_unmap_addr(&wq->rq, mapping));
 err6:
 	dma_free_coherent(&(rdev->lldi.pdev->dev),
 			  wq->sq.memsize, wq->sq.queue,
-			  pci_unmap_addr(&wq->sq, mapping));
+			  dma_unmap_addr(&wq->sq, mapping));
 err5:
 	c4iw_rqtpool_free(rdev, wq->rq.rqt_hwaddr, wq->rq.rqt_size);
 err4:
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 1057cb96..9cf8d85 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -279,7 +279,7 @@
 struct t4_sq {
 	union t4_wr *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swsqe *sw_sq;
 	struct t4_swsqe *oldest_read;
 	u64 udb;
@@ -298,7 +298,7 @@
 struct t4_rq {
 	union  t4_recv_wr *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swrqe *sw_rq;
 	u64 udb;
 	size_t memsize;
@@ -429,7 +429,7 @@
 struct t4_cq {
 	struct t4_cqe *queue;
 	dma_addr_t dma_addr;
-	DECLARE_PCI_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_cqe *sw_queue;
 	void __iomem *gts;
 	struct c4iw_rdev *rdev;
diff --git a/drivers/infiniband/hw/qib/Makefile b/drivers/infiniband/hw/qib/Makefile
index c6515a1..f12d7bb 100644
--- a/drivers/infiniband/hw/qib/Makefile
+++ b/drivers/infiniband/hw/qib/Makefile
@@ -6,7 +6,7 @@
 	qib_qp.o qib_qsfp.o qib_rc.o qib_ruc.o qib_sdma.o qib_srq.o \
 	qib_sysfs.o qib_twsi.o qib_tx.o qib_uc.o qib_ud.o \
 	qib_user_pages.o qib_user_sdma.o qib_verbs_mcast.o qib_iba7220.o \
-	qib_sd7220.o qib_sd7220_img.o qib_iba7322.o qib_verbs.o
+	qib_sd7220.o qib_iba7322.o qib_verbs.o
 
 # 6120 has no fallback if no MSI interrupts, others can do INTx
 ib_qib-$(CONFIG_PCI_MSI) += qib_iba6120.o
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 32d9208..3593983 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -686,6 +686,7 @@
 	void __iomem *piobase;
 	/* mem-mapped pointer to base of user chip regs (if using WC PAT) */
 	u64 __iomem *userbase;
+	void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
 	/*
 	 * points to area where PIOavail registers will be DMA'ed.
 	 * Has to be on a page of it's own, because the page will be
diff --git a/drivers/infiniband/hw/qib/qib_7220.h b/drivers/infiniband/hw/qib/qib_7220.h
index ea0bfd8..21f374a 100644
--- a/drivers/infiniband/hw/qib/qib_7220.h
+++ b/drivers/infiniband/hw/qib/qib_7220.h
@@ -109,10 +109,6 @@
  */
 int qib_sd7220_presets(struct qib_devdata *dd);
 int qib_sd7220_init(struct qib_devdata *dd);
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum, u8 *img,
-		       int len, int offset);
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum, const u8 *img,
-			int len, int offset);
 void qib_sd7220_clr_ibpar(struct qib_devdata *);
 /*
  * Below used for sdnum parameter, selecting one of the two sections
@@ -121,9 +117,6 @@
  */
 #define IB_7220_SERDES 2
 
-int qib_sd7220_ib_load(struct qib_devdata *dd);
-int qib_sd7220_ib_vfy(struct qib_devdata *dd);
-
 static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
 				  const u16 regno)
 {
diff --git a/drivers/infiniband/hw/qib/qib_7322_regs.h b/drivers/infiniband/hw/qib/qib_7322_regs.h
index a97440b..32dc81f 100644
--- a/drivers/infiniband/hw/qib/qib_7322_regs.h
+++ b/drivers/infiniband/hw/qib/qib_7322_regs.h
@@ -742,15 +742,15 @@
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_LSB 0xF
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_MSB 0xF
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_1_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_LSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_MSB 0xE
-#define QIB_7322_HwErrMask_statusValidNoEopMask_1_RMASK 0x1
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_LSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_MSB 0xE
+#define QIB_7322_HwErrMask_IBCBusToSPCParityErrMask_1_RMASK 0x1
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_LSB 0xD
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_MSB 0xD
 #define QIB_7322_HwErrMask_IBCBusFromSPCParityErrMask_0_RMASK 0x1
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_LSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_MSB 0xC
-#define QIB_7322_HwErrMask_statusValidNoEopMask_0_RMASK 0x1
+#define QIB_7322_HwErrMask_statusValidNoEopMask_LSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_MSB 0xC
+#define QIB_7322_HwErrMask_statusValidNoEopMask_RMASK 0x1
 #define QIB_7322_HwErrMask_LATriggeredMask_LSB 0xB
 #define QIB_7322_HwErrMask_LATriggeredMask_MSB 0xB
 #define QIB_7322_HwErrMask_LATriggeredMask_RMASK 0x1
@@ -796,15 +796,15 @@
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_LSB 0xF
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_MSB 0xF
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwErrStatus_statusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwErrStatus_IBCBusToSPCParityErr_1_RMASK 0x1
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_LSB 0xD
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_MSB 0xD
 #define QIB_7322_HwErrStatus_IBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwErrStatus_statusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwErrStatus_statusValidNoEop_LSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_MSB 0xC
+#define QIB_7322_HwErrStatus_statusValidNoEop_RMASK 0x1
 #define QIB_7322_HwErrStatus_LATriggered_LSB 0xB
 #define QIB_7322_HwErrStatus_LATriggered_MSB 0xB
 #define QIB_7322_HwErrStatus_LATriggered_RMASK 0x1
@@ -850,15 +850,15 @@
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_LSB 0xF
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_MSB 0xF
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_1_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_LSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_MSB 0xE
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_1_RMASK 0x1
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_LSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_MSB 0xE
+#define QIB_7322_HwErrClear_IBCBusToSPCParityErrClear_1_RMASK 0x1
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_LSB 0xD
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_MSB 0xD
 #define QIB_7322_HwErrClear_IBCBusFromSPCParityErrClear_0_RMASK 0x1
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_LSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_MSB 0xC
-#define QIB_7322_HwErrClear_IBCBusToSPCparityErrClear_0_RMASK 0x1
+#define QIB_7322_HwErrClear_statusValidNoEopClear_LSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_MSB 0xC
+#define QIB_7322_HwErrClear_statusValidNoEopClear_RMASK 0x1
 #define QIB_7322_HwErrClear_LATriggeredClear_LSB 0xB
 #define QIB_7322_HwErrClear_LATriggeredClear_MSB 0xB
 #define QIB_7322_HwErrClear_LATriggeredClear_RMASK 0x1
@@ -880,15 +880,15 @@
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_LSB 0xF
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_MSB 0xF
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_1_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_LSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_MSB 0xE
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_1_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_LSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_MSB 0xE
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_1_RMASK 0x1
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_LSB 0xD
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_MSB 0xD
 #define QIB_7322_HwDiagCtrl_ForceIBCBusFromSPCParityErr_0_RMASK 0x1
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_LSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_MSB 0xC
-#define QIB_7322_HwDiagCtrl_ForcestatusValidNoEop_0_RMASK 0x1
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_LSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_MSB 0xC
+#define QIB_7322_HwDiagCtrl_ForceIBCBusToSPCParityErr_0_RMASK 0x1
 
 #define QIB_7322_EXTStatus_OFFS 0xC0
 #define QIB_7322_EXTStatus_DEF 0x000000000000X000
diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
index ca98dd5..05dcf0d 100644
--- a/drivers/infiniband/hw/qib/qib_diag.c
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -233,6 +233,7 @@
 	u32 __iomem *krb32 = (u32 __iomem *)dd->kregbase;
 	u32 __iomem *map = NULL;
 	u32 cnt = 0;
+	u32 tot4k, offs4k;
 
 	/* First, simplest case, offset is within the first map. */
 	kreglen = (dd->kregend - dd->kregbase) * sizeof(u64);
@@ -250,7 +251,8 @@
 	if (dd->userbase) {
 		/* If user regs mapped, they are after send, so set limit. */
 		u32 ulim = (dd->cfgctxts * dd->ureg_align) + dd->uregbase;
-		snd_lim = dd->uregbase;
+		if (!dd->piovl15base)
+			snd_lim = dd->uregbase;
 		krb32 = (u32 __iomem *)dd->userbase;
 		if (offset >= dd->uregbase && offset < ulim) {
 			map = krb32 + (offset - dd->uregbase) / sizeof(u32);
@@ -277,14 +279,14 @@
 	/* If 4k buffers exist, account for them by bumping
 	 * appropriate limit.
 	 */
+	tot4k = dd->piobcnt4k * dd->align4k;
+	offs4k = dd->piobufbase >> 32;
 	if (dd->piobcnt4k) {
-		u32 tot4k = dd->piobcnt4k * dd->align4k;
-		u32 offs4k = dd->piobufbase >> 32;
 		if (snd_bottom > offs4k)
 			snd_bottom = offs4k;
 		else {
 			/* 4k above 2k. Bump snd_lim, if needed*/
-			if (!dd->userbase)
+			if (!dd->userbase || dd->piovl15base)
 				snd_lim = offs4k + tot4k;
 		}
 	}
@@ -298,6 +300,15 @@
 		cnt = snd_lim - offset;
 	}
 
+	if (!map && offs4k && dd->piovl15base) {
+		snd_lim = offs4k + tot4k + 2 * dd->align4k;
+		if (offset >= (offs4k + tot4k) && offset < snd_lim) {
+			map = (u32 __iomem *)dd->piovl15base +
+				((offset - (offs4k + tot4k)) / sizeof(u32));
+			cnt = snd_lim - offset;
+		}
+	}
+
 mapped:
 	if (cntp)
 		*cntp = cnt;
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index edef852..844954b 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -542,10 +542,8 @@
 	list_for_each_entry_safe(dd, tmp, &qib_dev_list, list) {
 		spin_unlock_irqrestore(&qib_devs_lock, flags);
 		ret = add_cntr_files(sb, dd);
-		if (ret) {
-			deactivate_super(sb);
+		if (ret)
 			goto bail;
-		}
 		spin_lock_irqsave(&qib_devs_lock, flags);
 	}
 
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 1eadadc..a5e29db 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1355,8 +1355,7 @@
 	hwstat = qib_read_kreg64(dd, kr_hwerrstatus);
 	if (hwstat) {
 		/* should just have PLL, clear all set, in an case */
-		if (hwstat & ~QLOGIC_IB_HWE_SERDESPLLFAILED)
-			qib_write_kreg(dd, kr_hwerrclear, hwstat);
+		qib_write_kreg(dd, kr_hwerrclear, hwstat);
 		qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr));
 	}
 
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 503992d..5eedf83 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -543,7 +543,7 @@
 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
 
 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
-#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */
+#define TXDDS_EXTRA_SZ 13 /* number of extra tx settings entries */
 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
 
 #define H1_FORCE_VAL 8
@@ -1100,9 +1100,9 @@
 	HWE_AUTO_P(SDmaMemReadErr, 1),
 	HWE_AUTO_P(SDmaMemReadErr, 0),
 	HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
+	HWE_AUTO_P(IBCBusToSPCParityErr, 1),
 	HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
-	HWE_AUTO_P(statusValidNoEop, 1),
-	HWE_AUTO_P(statusValidNoEop, 0),
+	HWE_AUTO(statusValidNoEop),
 	HWE_AUTO(LATriggered),
 	{ .mask = 0 }
 };
@@ -4763,6 +4763,8 @@
 		SYM_MASK(IBPCSConfig_0, tx_rx_reset);
 
 	val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
+	qib_write_kreg(dd, kr_hwerrmask,
+		       dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop));
 	qib_write_kreg_port(ppd, krp_ibcctrl_a,
 			    ppd->cpspec->ibcctrl_a &
 			    ~SYM_MASK(IBCCtrlA_0, IBLinkEn));
@@ -4772,6 +4774,9 @@
 	qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
 	qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
 	qib_write_kreg(dd, kr_scratch, 0ULL);
+	qib_write_kreg(dd, kr_hwerrclear,
+		       SYM_MASK(HwErrClear, statusValidNoEopClear));
+	qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
 }
 
 /*
@@ -5624,6 +5629,8 @@
 			if (ppd->port != port || !ppd->link_speed_supported)
 				continue;
 			ppd->cpspec->no_eep = val;
+			if (seth1)
+				ppd->cpspec->h1_val = h1;
 			/* now change the IBC and serdes, overriding generic */
 			init_txdds_table(ppd, 1);
 			any++;
@@ -6064,9 +6071,9 @@
 		 * the "cable info" setup here.  Can be overridden
 		 * in adapter-specific routines.
 		 */
-		if (!(ppd->dd->flags & QIB_HAS_QSFP)) {
-			if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd))
-				qib_devinfo(ppd->dd->pcidev, "IB%u:%u: "
+		if (!(dd->flags & QIB_HAS_QSFP)) {
+			if (!IS_QMH(dd) && !IS_QME(dd))
+				qib_devinfo(dd->pcidev, "IB%u:%u: "
 					    "Unknown mezzanine card type\n",
 					    dd->unit, ppd->port);
 			cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
@@ -6119,9 +6126,25 @@
 	qib_set_ctxtcnt(dd);
 
 	if (qib_wc_pat) {
-		ret = init_chip_wc_pat(dd, NUM_VL15_BUFS * dd->align4k);
+		resource_size_t vl15off;
+		/*
+		 * We do not set WC on the VL15 buffers to avoid
+		 * a rare problem with unaligned writes from
+		 * interrupt-flushed store buffers, so we need
+		 * to map those separately here.  We can't solve
+		 * this for the rarely used mtrr case.
+		 */
+		ret = init_chip_wc_pat(dd, 0);
 		if (ret)
 			goto bail;
+
+		/* vl15 buffers start just after the 4k buffers */
+		vl15off = dd->physaddr + (dd->piobufbase >> 32) +
+			dd->piobcnt4k * dd->align4k;
+		dd->piovl15base	= ioremap_nocache(vl15off,
+						  NUM_VL15_BUFS * dd->align4k);
+		if (!dd->piovl15base)
+			goto bail;
 	}
 	qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
 
@@ -6932,6 +6955,8 @@
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 11 },	/* QME7342 backplane settings */
+	{  0, 0, 0,  3 },	/* QMH7342 backplane settings */
+	{  0, 0, 0,  4 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
@@ -6947,6 +6972,8 @@
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
 	{  0, 0, 0, 13 },	/* QME7342 backplane settings */
+	{  0, 0, 0,  9 },	/* QMH7342 backplane settings */
+	{  0, 0, 0, 10 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
@@ -6962,6 +6989,8 @@
 	{  0, 1, 12,  6 },	/* QME7342 backplane setting */
 	{  0, 1, 12,  7 },	/* QME7342 backplane setting */
 	{  0, 1, 12,  8 },	/* QME7342 backplane setting */
+	{  0, 1,  0, 10 },	/* QMH7342 backplane settings */
+	{  0, 1,  0, 12 },	/* QMH7342 backplane settings */
 };
 
 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index 9b40f34..a873dd5 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -1059,7 +1059,7 @@
 		goto bail_dev;
 	}
 
-	qib_cq_wq = create_workqueue("qib_cq");
+	qib_cq_wq = create_singlethread_workqueue("qib_cq");
 	if (!qib_cq_wq) {
 		ret = -ENOMEM;
 		goto bail_wq;
@@ -1289,8 +1289,18 @@
 
 	if (qib_mini_init || initfail || ret) {
 		qib_stop_timers(dd);
+		flush_scheduled_work();
 		for (pidx = 0; pidx < dd->num_pports; ++pidx)
 			dd->f_quiet_serdes(dd->pport + pidx);
+		if (qib_mini_init)
+			goto bail;
+		if (!j) {
+			(void) qibfs_remove(dd);
+			qib_device_remove(dd);
+		}
+		if (!ret)
+			qib_unregister_ib_device(dd);
+		qib_postinit_cleanup(dd);
 		if (initfail)
 			ret = initfail;
 		goto bail;
@@ -1472,6 +1482,9 @@
 		dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
 		unsigned i;
 
+		/* clear for security and sanity on each use */
+		memset(rcd->rcvegrbuf[chunk], 0, size);
+
 		for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
 			dd->f_put_tid(dd, e + egroff +
 					  (u64 __iomem *)
@@ -1499,6 +1512,12 @@
 	return -ENOMEM;
 }
 
+/*
+ * Note: Changes to this routine should be mirrored
+ * for the diagnostics routine qib_remap_ioaddr32().
+ * There is also related code for VL15 buffers in qib_init_7322_variables().
+ * The teardown code that unmaps is in qib_pcie_ddcleanup()
+ */
 int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
 {
 	u64 __iomem *qib_kregbase = NULL;
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c926bf4..7fa6e55 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -179,6 +179,8 @@
 		iounmap(dd->piobase);
 	if (dd->userbase)
 		iounmap(dd->userbase);
+	if (dd->piovl15base)
+		iounmap(dd->piovl15base);
 
 	pci_disable_device(dd->pcidev);
 	pci_release_regions(dd->pcidev);
diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c
index 0aeed0e..e9f9f8b 100644
--- a/drivers/infiniband/hw/qib/qib_sd7220.c
+++ b/drivers/infiniband/hw/qib/qib_sd7220.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
@@ -37,10 +38,14 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/firmware.h>
 
 #include "qib.h"
 #include "qib_7220.h"
 
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
+MODULE_FIRMWARE(SD7220_FW_NAME);
+
 /*
  * Same as in qib_iba7220.c, but just the registers needed here.
  * Could move whole set to qib_7220.h, but decided better to keep
@@ -102,6 +107,10 @@
 /* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */
 static int qib_sd_trimself(struct qib_devdata *dd, int val);
 static int epb_access(struct qib_devdata *dd, int sdnum, int claim);
+static int qib_sd7220_ib_load(struct qib_devdata *dd,
+			      const struct firmware *fw);
+static int qib_sd7220_ib_vfy(struct qib_devdata *dd,
+			     const struct firmware *fw);
 
 /*
  * Below keeps track of whether the "once per power-on" initialization has
@@ -110,10 +119,13 @@
  * state of the reset "pin", is no longer valid. Instead, we check for the
  * actual uC code having been loaded.
  */
-static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd)
+static int qib_ibsd_ucode_loaded(struct qib_pportdata *ppd,
+				 const struct firmware *fw)
 {
 	struct qib_devdata *dd = ppd->dd;
-	if (!dd->cspec->serdes_first_init_done && (qib_sd7220_ib_vfy(dd) > 0))
+
+	if (!dd->cspec->serdes_first_init_done &&
+	    qib_sd7220_ib_vfy(dd, fw) > 0)
 		dd->cspec->serdes_first_init_done = 1;
 	return dd->cspec->serdes_first_init_done;
 }
@@ -377,6 +389,7 @@
  */
 int qib_sd7220_init(struct qib_devdata *dd)
 {
+	const struct firmware *fw;
 	int ret = 1; /* default to failure */
 	int first_reset, was_reset;
 
@@ -387,8 +400,15 @@
 		qib_ibsd_reset(dd, 1);
 		qib_sd_trimdone_monitor(dd, "Driver-reload");
 	}
+
+	ret = request_firmware(&fw, SD7220_FW_NAME, &dd->pcidev->dev);
+	if (ret) {
+		qib_dev_err(dd, "Failed to load IB SERDES image\n");
+		goto done;
+	}
+
 	/* Substitute our deduced value for was_reset */
-	ret = qib_ibsd_ucode_loaded(dd->pport);
+	ret = qib_ibsd_ucode_loaded(dd->pport, fw);
 	if (ret < 0)
 		goto bail;
 
@@ -437,13 +457,13 @@
 		int vfy;
 		int trim_done;
 
-		ret = qib_sd7220_ib_load(dd);
+		ret = qib_sd7220_ib_load(dd, fw);
 		if (ret < 0) {
 			qib_dev_err(dd, "Failed to load IB SERDES image\n");
 			goto bail;
 		} else {
 			/* Loaded image, try to verify */
-			vfy = qib_sd7220_ib_vfy(dd);
+			vfy = qib_sd7220_ib_vfy(dd, fw);
 			if (vfy != ret) {
 				qib_dev_err(dd, "SERDES PRAM VFY failed\n");
 				goto bail;
@@ -506,6 +526,8 @@
 done:
 	/* start relock timer regardless, but start at 1 second */
 	set_7220_relock_poll(dd, -1);
+
+	release_firmware(fw);
 	return ret;
 }
 
@@ -829,8 +851,8 @@
 
 #define PROG_CHUNK 64
 
-int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
-		       u8 *img, int len, int offset)
+static int qib_sd7220_prog_ld(struct qib_devdata *dd, int sdnum,
+			      const u8 *img, int len, int offset)
 {
 	int cnt, sofar, req;
 
@@ -840,7 +862,7 @@
 		if (req > PROG_CHUNK)
 			req = PROG_CHUNK;
 		cnt = qib_sd7220_ram_xfer(dd, sdnum, offset + sofar,
-					  img + sofar, req, 0);
+					  (u8 *)img + sofar, req, 0);
 		if (cnt < req) {
 			sofar = -1;
 			break;
@@ -853,8 +875,8 @@
 #define VFY_CHUNK 64
 #define SD_PRAM_ERROR_LIMIT 42
 
-int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
-			const u8 *img, int len, int offset)
+static int qib_sd7220_prog_vfy(struct qib_devdata *dd, int sdnum,
+			       const u8 *img, int len, int offset)
 {
 	int cnt, sofar, req, idx, errors;
 	unsigned char readback[VFY_CHUNK];
@@ -881,6 +903,18 @@
 	return errors ? -errors : sofar;
 }
 
+static int
+qib_sd7220_ib_load(struct qib_devdata *dd, const struct firmware *fw)
+{
+	return qib_sd7220_prog_ld(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
+static int
+qib_sd7220_ib_vfy(struct qib_devdata *dd, const struct firmware *fw)
+{
+	return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, fw->data, fw->size, 0);
+}
+
 /*
  * IRQ not set up at this point in init, so we poll.
  */
diff --git a/drivers/infiniband/hw/qib/qib_sd7220_img.c b/drivers/infiniband/hw/qib/qib_sd7220_img.c
deleted file mode 100644
index a1118fb..0000000
--- a/drivers/infiniband/hw/qib/qib_sd7220_img.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains the memory image from the vendor, to be copied into
- * the IB SERDES of the IBA7220 during initialization.
- * The file also includes the two functions which use this image.
- */
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "qib.h"
-#include "qib_7220.h"
-
-static unsigned char qib_sd7220_ib_img[] = {
-/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6,
-	0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01,
-	0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08,
-/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08,
-	0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2,
-/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7,
-	0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00,
-/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75,
-	0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5,
-/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38,
-	0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94,
-/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36,
-	0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74,
-/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90,
-	0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20,
-/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3,
-	0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12,
-/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04,
-	0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09,
-/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00,
-	0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2,
-/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09,
-	0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83,
-	0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3,
-/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0,
-	0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03,
-/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4,
-	0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E,
-/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82,
-	0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44,
-/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40,
-	0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54,
-/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-	0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08,
-/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF,
-	0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40,
-/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75,
-	0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E,
-/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD,
-	0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81,
-/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED,
-	0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF,
-/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0,
-	0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12,
-/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32,
-	0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74,
-/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83,
-	0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0,
-/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19,
-	0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE,
-/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03,
-	0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0,
-/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83,
-	0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12,
-/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3,
-	0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A,
-/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF,
-	0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19,
-/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30,
-	0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C,
-	0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60,
-/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44,
-	0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02,
-/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7,
-	0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0,
-/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04,
-	0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01,
-/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40,
-	0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12,
-/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32,
-	0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0,
-	0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5,
-/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40,
-	0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07,
-/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F,
-	0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D,
-/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A,
-	0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74,
-/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12,
-	0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90,
-/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE,
-	0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5,
-/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02,
-	0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82,
-/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A,
-	0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04,
-/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82,
-	0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A,
-/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04,
-	0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82,
-/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92,
-	0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A,
-/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2,
-	0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F,
-/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20,
-	0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12,
-/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30,
-	0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06,
-/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D,
-	0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0,
-/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43,
-	0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04,
-/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A,
-	0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
-	0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17,
-/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44,
-	0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12,
-/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12,
-	0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74,
-/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0,
-	0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44,
-/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07,
-	0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE,
-/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12,
-	0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10,
-/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12,
-	0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF,
-/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30,
-	0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B,
-	0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5,
-/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09,
-	0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82,
-/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F,
-	0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3,
-/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02,
-	0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E,
-/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09,
-	0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1,
-/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B,
-	0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75,
-/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73,
-	0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0,
-/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47,
-	0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F,
-/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07,
-	0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80,
-/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74,
-	0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F,
-/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83,
-	0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08,
-/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12,
-	0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B,
-/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36,
-	0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12,
-	0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0,
-/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5,
-	0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33,
-/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4,
-	0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4,
-/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E,
-	0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12,
-/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF,
-	0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D,
-/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02,
-	0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01,
-/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06,
-	0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF,
-/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80,
-	0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04,
-/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E,
-	0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5,
-/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60,
-	0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46,
-/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76,
-	0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F,
-/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95,
-	0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5,
-/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01,
-	0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80,
-/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95,
-	0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-	0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F,
-/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46,
-	0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75,
-/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E,
-	0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5,
-/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5,
-	0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F,
-/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5,
-	0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5,
-/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04,
-	0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80,
-/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F,
-	0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5,
-/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D,
-	0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70,
-/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5,
-	0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C,
-/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E,
-	0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79,
-/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85,
-	0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50,
-/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78,
-	0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30,
-/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E,
-	0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19,
-/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-	0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F,
-	0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14,
-/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19,
-	0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75,
-	0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C,
-/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E,
-	0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80,
-/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5,
-	0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB,
-	0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0,
-/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44,
-	0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0,
-/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA,
-	0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC,
-/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5,
-	0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0,
-/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83,
-	0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44,
-/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54,
-	0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3,
-	0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42,
-/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74,
-	0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5,
-/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5,
-	0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5,
-/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C,
-	0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80,
-/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22,
-	0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5,
-/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07,
-	0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C,
-/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44,
-	0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85,
-/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A,
-	0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E,
-/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED,
-	0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22,
-/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02,
-	0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11,
-/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22,
-	0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11,
-	0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-	0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11,
-/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-	0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5,
-	0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF,
-/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-	0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5,
-/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25,
-	0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-	0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25,
-/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83,
-	0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD,
-	0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41,
-/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22,
-	0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00,
-/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-	0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5,
-/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42,
-	0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C,
-/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75,
-	0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3,
-/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E,
-	0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5,
-/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00,
-	0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5,
-/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07,
-	0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95,
-/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4,
-	0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0,
-/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-	0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82,
-/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4,
-	0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41,
-/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60,
-	0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37,
-/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD,
-	0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28,
-/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8,
-	0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F,
-/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0,
-	0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54,
-/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF,
-	0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26,
-/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4,
-	0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89,
-/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12,
-	0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08,
-/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24,
-	0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12,
-/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E,
-	0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01,
-	0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78,
-/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF,
-	0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0,
-/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07,
-	0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF,
-/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24,
-	0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC,
-	0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12,
-/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08,
-	0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4,
-/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08,
-	0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41,
-/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0,
-	0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D,
-/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0,
-	0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4,
-/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5,
-	0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5,
-/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6,
-	0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78,
-/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE,
-	0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8,
-/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5,
-	0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1,
-/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00,
-	0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3,
-/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43,
-	0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83,
-/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0,
-	0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0,
-/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55,
-	0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6,
-/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3,
-	0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33,
-/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40,
-	0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF,
-/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10,
-	0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E,
-/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F,
-	0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93,
-/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25,
-	0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C,
-/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4,
-	0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D,
-/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66,
-	0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90,
-/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4,
-	0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12,
-/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8,
-	0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12,
-/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05,
-	0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55,
-/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70,
-	0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5,
-/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
-	0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12,
-/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-	0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12,
-/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12,
-	0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E,
-/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44,
-	0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3,
-/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68,
-	0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14,
-/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA,
-	0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74,
-/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80,
-	0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5,
-/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95,
-	0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70,
-/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12,
-	0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80,
-/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D,
-	0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85,
-/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F,
-	0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07,
-/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5,
-	0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F,
-/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12,
-	0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12,
-/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C,
-	0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38,
-/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80,
-	0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08,
-/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D,
-	0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39,
-/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38,
-	0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F,
-/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12,
-	0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A,
-/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12,
-	0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5,
-/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75,
-	0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12,
-/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0,
-	0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06,
-/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5,
-	0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13,
-/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09,
-	0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40,
-/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E,
-	0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
-	0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F,
-/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5,
-/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80,
-	0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0,
-/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74,
-	0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17,
-/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07,
-	0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90,
-/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44,
-	0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54,
-/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F,
-	0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07,
-/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82,
-	0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED,
-/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF,
-	0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54,
-/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91,
-	0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30,
-/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92,
-	0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4,
-/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75,
-	0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A,
-/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0,
-	0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E,
-/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E,
-	0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0,
-/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75,
-	0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75,
-/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07,
-	0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10,
-/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF,
-	0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82,
-/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5,
-	0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75,
-/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44,
-	0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0,
-	0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34,
-/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22,
-	0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1,
-/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25,
-	0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4,
-/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85,
-	0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0,
-/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00,
-	0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00,
-/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22,
-	0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5,
-/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30,
-	0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC,
-/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B,
-	0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28,
-/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07,
-	0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24,
-/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70,
-	0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07,
-/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0,
-	0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12,
-/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41,
-	0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12,
-/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04,
-	0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64,
-/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02,
-	0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07,
-/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07,
-	0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF,
-/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0,
-	0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0,
-	0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07,
-/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12,
-	0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E,
-	0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70,
-/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43,
-	0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10,
-/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-	0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52,
-/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08,
-	0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B,
-/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00,
-	0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12,
-	0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51,
-/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1,
-	0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1,
-/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80,
-	0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01,
-/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40,
-	0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12,
-	0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22,
-/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10,
-	0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12,
-	0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10,
-/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12,
-	0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0,
-/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07,
-	0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07,
-/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00,
-	0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90,
-	0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56,
-/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12,
-	0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5,
-/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA,
-	0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12,
-/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F,
-	0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22,
-/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74,
-	0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57,
-/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01,
-	0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04,
-/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4,
-	0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0,
-/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94,
-	0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12,
-/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5,
-	0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5,
-/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56,
-	0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80,
-/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40,
-	0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22,
-/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93,
-	0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5,
-/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22,
-	0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5,
-/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93,
-	0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6,
-/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED,
-	0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5,
-/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01,
-	0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00,
-/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D,
-	0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01,
-/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12,
-	0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4,
-/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85,
-	0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5,
-/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07,
-	0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12,
-/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E,
-	0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45,
-/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08,
-	0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00,
-/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5,
-	0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05,
-/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC,
-	0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11,
-/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0,
-	0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE,
-/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58,
-/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75,
-	0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75,
-/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08,
-	0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF,
-/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90,
-	0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35,
-/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF,
-	0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45,
-/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-	0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E,
-/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60,
-	0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5,
-/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE,
-	0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58,
-/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12,
-	0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00,
-/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07,
-	0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B,
-/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12,
-	0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12,
-/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64,
-	0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E,
-/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95,
-	0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40,
-/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05,
-	0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39,
-/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12,
-	0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B,
-/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07,
-	0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F,
-/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5,
-	0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C,
-/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39,
-	0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12,
-/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5,
-	0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38,
-/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C,
-	0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C,
-/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09,
-	0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40,
-/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E,
-	0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38,
-/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80,
-	0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07,
-/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F,
-	0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63,
-/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12,
-	0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5,
-/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38,
-	0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60,
-/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39,
-	0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C,
-/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12,
-	0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5,
-/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08,
-	0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15,
-/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17,
-	0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80,
-/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94,
-	0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31,
-/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15,
-	0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01,
-/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04,
-	0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A,
-/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77,
-	0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15,
-/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04,
-	0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15,
-/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E,
-	0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22,
-/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15,
-	0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A,
-/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29,
-	0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13,
-/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24,
-	0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63,
-/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6,
-	0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22,
-/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3,
-	0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5,
-/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74,
-	0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74,
-/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20,
-	0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8,
-/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44,
-	0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF,
-/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6,
-	0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3,
-/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E,
-	0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A,
-/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5,
-	0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3,
-/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07,
-	0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70,
-/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5,
-/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5,
-/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
-	0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80,
-/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF,
-	0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12,
-/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D,
-	0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02,
-/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B,
-	0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B,
-/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B,
-	0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5,
-/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60,
-	0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12,
-/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E,
-	0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6,
-/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8,
-	0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA,
-/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5,
-	0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80,
-/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5,
-	0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4,
-/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29,
-	0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F,
-/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E,
-	0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B,
-/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11,
-	0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12,
-/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A,
-	0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5,
-/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13,
-	0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3,
-/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12,
-	0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE,
-/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19,
-	0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E,
-/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D,
-/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12,
-	0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94,
-/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83,
-	0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0,
-/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-	0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F,
-	0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75,
-/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21,
-	0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44,
-/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF,
-	0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75,
-/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29,
-	0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07,
-/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12,
-	0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10,
-/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44,
-	0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0,
-/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12,
-	0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58,
-/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC,
-	0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-	0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2,
-	0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4,
-/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12,
-	0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07,
-/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58,
-	0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A,
-/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7,
-	0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09,
-/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0,
-	0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54,
-/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78,
-	0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
-/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B,
-	0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33,
-/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83,
-	0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83,
-/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E,
-	0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3,
-/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00,
-	0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02,
-/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58,
-	0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12,
-/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54,
-	0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E,
-/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE,
-/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05,
-	0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33,
-/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C,
-	0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02,
-/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12,
-	0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12,
-/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2,
-	0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3,
-/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41,
-	0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5,
-/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07,
-	0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C,
-/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B,
-	0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60,
-/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41,
-	0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B,
-/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00,
-	0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02,
-/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41,
-	0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40,
-/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1,
-	0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F,
-/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70,
-	0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2,
-	0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E,
-/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5,
-	0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5,
-/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0,
-	0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05,
-/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70,
-	0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA,
-/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F,
-	0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0,
-/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5,
-	0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01,
-/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D,
-	0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32,
-/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04,
-	0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82,
-/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01,
-	0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15,
-/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05,
-	0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43,
-/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E,
-	0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83,
-	0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0,
-/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34,
-	0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12,
-/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0,
-	0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0,
-/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04,
-	0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80,
-/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0,
-	0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83,
-/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12,
-	0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33,
-/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E,
-	0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15,
-/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75,
-	0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12,
-/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80,
-	0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12,
-/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20,
-	0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C,
-/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80,
-	0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF,
-/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25,
-	0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07,
-/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08,
-	0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
-/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-	0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E,
-/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-	0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94,
-/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04,
-	0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83,
-/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5,
-	0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07,
-/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29,
-/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12,
-	0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0,
-/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70,
-	0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90,
-/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0,
-	0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF,
-/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5,
-	0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07,
-/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22,
-	0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90,
-/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94,
-	0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98,
-/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C,
-	0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0,
-/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4,
-	0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8,
-/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC,
-	0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0,
-/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6,
-	0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB,
-/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4,
-	0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5,
-/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08,
-	0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5,
-/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29,
-	0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80,
-/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5,
-	0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35,
-/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83,
-	0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12,
-/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26,
-	0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75,
-/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17,
-	0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4,
-/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93,
-	0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5,
-/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10,
-	0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54,
-/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06,
-	0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00,
-/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00,
-	0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0,
-/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75,
-	0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0,
-/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14,
-	0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70,
-/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7,
-	0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74,
-/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44,
-	0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12,
-/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0,
-	0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12,
-/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE,
-	0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B,
-/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4,
-	0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF,
-/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F,
-	0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70,
-/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41,
-	0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5,
-/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A,
-	0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5,
-/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5,
-	0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5,
-/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0,
-	0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C,
-/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80,
-	0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04,
-/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F,
-	0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A,
-/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41,
-	0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01,
-/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54,
-	0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F,
-/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58,
-	0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59,
-/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85,
-	0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59,
-/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15,
-	0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A,
-/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5,
-	0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2,
-/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20,
-	0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12,
-/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94,
-	0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9,
-/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9,
-	0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00,
-/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83,
-	0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12,
-/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02,
-	0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83,
-/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75,
-	0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94,
-/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A,
-	0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74,
-/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE,
-	0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08,
-/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85,
-	0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0,
-/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01,
-	0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC,
-/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E,
-	0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00,
-/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-	0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56,
-/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE,
-	0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12,
-/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E,
-	0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44,
-/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4,
-	0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08,
-/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82,
-	0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3,
-/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E,
-	0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC,
-	0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD,
-/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02,
-	0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09,
-/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42,
-	0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3,
-/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C,
-	0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F,
-/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84,
-	0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82,
-/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0,
-	0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22,
-/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75,
-	0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12,
-/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20,
-	0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26,
-/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41,
-	0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40,
-/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12,
-	0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56,
-/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42,
-	0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39,
-/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5,
-	0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F,
-/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB,
-	0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00,
-/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81
-};
-
-int qib_sd7220_ib_load(struct qib_devdata *dd)
-{
-	return qib_sd7220_prog_ld(dd, IB_7220_SERDES, qib_sd7220_ib_img,
-		sizeof(qib_sd7220_ib_img), 0);
-}
-
-int qib_sd7220_ib_vfy(struct qib_devdata *dd)
-{
-	return qib_sd7220_prog_vfy(dd, IB_7220_SERDES, qib_sd7220_ib_img,
-		sizeof(qib_sd7220_ib_img), 0);
-}
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
index f7eb1dd..af30232 100644
--- a/drivers/infiniband/hw/qib/qib_tx.c
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -340,9 +340,13 @@
 		if (i < dd->piobcnt2k)
 			buf = (u32 __iomem *)(dd->pio2kbase +
 				i * dd->palign);
-		else
+		else if (i < dd->piobcnt2k + dd->piobcnt4k || !dd->piovl15base)
 			buf = (u32 __iomem *)(dd->pio4kbase +
 				(i - dd->piobcnt2k) * dd->align4k);
+		else
+			buf = (u32 __iomem *)(dd->piovl15base +
+				(i - (dd->piobcnt2k + dd->piobcnt4k)) *
+				dd->align4k);
 		if (pbufnum)
 			*pbufnum = i;
 		dd->upd_pio_shadow = 0;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index df3eb8c..b4b2257 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1163,7 +1163,7 @@
 
 	return ret ? ret : count;
 }
-static DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child);
+static DEVICE_ATTR(create_child, S_IWUSR, NULL, create_child);
 
 static ssize_t delete_child(struct device *dev,
 			    struct device_attribute *attr,
@@ -1183,7 +1183,7 @@
 	return ret ? ret : count;
 
 }
-static DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child);
+static DEVICE_ATTR(delete_child, S_IWUSR, NULL, delete_child);
 
 int ipoib_add_pkey_attr(struct net_device *dev)
 {
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index fbd62ab..0ffaf2c 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -89,7 +89,6 @@
 struct gc {
 	struct pardevice *pd;
 	struct gc_pad pads[GC_MAX_DEVICES];
-	struct input_dev *dev[GC_MAX_DEVICES];
 	struct timer_list timer;
 	int pad_count[GC_MAX];
 	int used;
@@ -387,7 +386,7 @@
 	for (i = 0; i < GC_MAX_DEVICES; i++) {
 
 		pad = &gc->pads[i];
-		dev = gc->dev[i];
+		dev = pad->dev;
 		s = gc_status_bit[i];
 
 		switch (pad->type) {
@@ -579,7 +578,7 @@
 		read = parport_read_status(port) ^ 0x80;
 
 		for (j = 0; j < GC_MAX_DEVICES; j++) {
-			struct gc_pad *pad = &gc->pads[i];
+			struct gc_pad *pad = &gc->pads[j];
 
 			if (pad->type == GC_PSX || pad->type == GC_DDR)
 				data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index d8fa5d7..1ba2514 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -73,7 +73,7 @@
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86 && !X86_MRST
+	select SERIO_I8042 if X86
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
@@ -124,7 +124,7 @@
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
-config QT2160
+config KEYBOARD_QT2160
 	tristate "Atmel AT42QT2160 Touch Sensor Chip"
 	depends on I2C && EXPERIMENTAL
 	help
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 7aa59e0..fb16b5e 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -51,8 +51,12 @@
  */
 #define TWL4030_MAX_ROWS	8	/* TWL4030 hard limit */
 #define TWL4030_MAX_COLS	8
-#define TWL4030_ROW_SHIFT	3
-#define TWL4030_KEYMAP_SIZE	(TWL4030_MAX_ROWS * TWL4030_MAX_COLS)
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT	4
+#define TWL4030_KEYMAP_SIZE	(TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
 
 struct twl4030_keypad {
 	unsigned short	keymap[TWL4030_KEYMAP_SIZE];
@@ -182,7 +186,7 @@
 	return ret;
 }
 
-static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
 {
 	int i;
 	u16 check = 0;
@@ -191,12 +195,12 @@
 		u16 col = key_state[i];
 
 		if ((col & check) && hweight16(col) > 1)
-			return 1;
+			return true;
 
 		check |= col;
 	}
 
-	return 0;
+	return false;
 }
 
 static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
@@ -225,7 +229,8 @@
 		if (!changed)
 			continue;
 
-		for (col = 0; col < kp->n_cols; col++) {
+		/* Extra column handles "all gnd" rows */
+		for (col = 0; col < kp->n_cols + 1; col++) {
 			int code;
 
 			if (!(changed & (1 << col)))
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 4ef764c..ee2bf6b 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -258,7 +258,7 @@
 	.probe		= w90p910_keypad_probe,
 	.remove		= __devexit_p(w90p910_keypad_remove),
 	.driver		= {
-		.name	= "nuc900-keypad",
+		.name	= "nuc900-kpi",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index e00a1cc..c190664 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -678,7 +678,7 @@
         .llseek =		no_llseek,
         .read =			hp_sdc_rtc_read,
         .poll =			hp_sdc_rtc_poll,
-        .unlocked_ioctl = 	hp_sdc_rtc_ioctl,
+        .unlocked_ioctl =	hp_sdc_rtc_unlocked_ioctl,
         .open =			hp_sdc_rtc_open,
         .fasync =		hp_sdc_rtc_fasync,
 };
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 0ac47d2..4b42ffc 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -69,7 +69,7 @@
 	unsigned char nextstate = read_state(lp);
 
 	if (lp->laststate != nextstate) {
-		int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+		int key_down = nextstate < ARRAY_SIZE(lp->btncode);
 		unsigned short keycode = key_down ?
 			lp->btncode[nextstate] : lp->btncode[lp->laststate];
 
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index eeb58c1c..c714ca2 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -17,7 +17,7 @@
 	default y
 	select SERIO
 	select SERIO_LIBPS2
-	select SERIO_I8042 if X86 && !X86_MRST
+	select SERIO_I8042 if X86
 	select SERIO_GSCPS2 if GSC
 	help
 	  Say Y here if you have a PS/2 mouse connected to your system. This
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 40cea33..705589d 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -141,8 +141,13 @@
 	priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
 	priv->ext_cap = priv->ext_cap_0c = 0;
 
-	if (!SYN_CAP_VALID(priv->capabilities))
+	/*
+	 * Older firmwares had submodel ID fixed to 0x47
+	 */
+	if (SYN_ID_FULL(priv->identity) < 0x705 &&
+	    SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
 		return -1;
+	}
 
 	/*
 	 * Unless capExtended is set the rest of the flags should be ignored
@@ -206,6 +211,7 @@
 	unsigned char max[3];
 
 	if (SYN_ID_MAJOR(priv->identity) < 4)
+		return 0;
 
 	if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
 		if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 7d4d5e1..b6aa7d2 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -47,7 +47,7 @@
 #define SYN_CAP_FOUR_BUTTON(c)		((c) & (1 << 3))
 #define SYN_CAP_MULTIFINGER(c)		((c) & (1 << 1))
 #define SYN_CAP_PALMDETECT(c)		((c) & (1 << 0))
-#define SYN_CAP_VALID(c)		((((c) & 0x00ff00) >> 8) == 0x47)
+#define SYN_CAP_SUBMODEL_ID(c)		(((c) & 0x00ff00) >> 8)
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
@@ -66,6 +66,7 @@
 #define SYN_ID_MODEL(i)			(((i) >> 4) & 0x0f)
 #define SYN_ID_MAJOR(i)			((i) & 0x0f)
 #define SYN_ID_MINOR(i)			(((i) >> 16) & 0xff)
+#define SYN_ID_FULL(i)			((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
 #define SYN_ID_IS_SYNAPTICS(i)		((((i) >> 8) & 0xff) == 0x47)
 
 /* synaptics special commands */
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f34f1db..3bfe8fa 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,8 @@
 config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
-	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
+	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
+		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
 	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6168469..ed7ad74 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -7,6 +7,10 @@
  * the Free Software Foundation.
  */
 
+#ifdef CONFIG_X86
+#include <asm/x86_init.h>
+#endif
+
 /*
  * Names.
  */
@@ -166,6 +170,13 @@
 		},
 	},
 	{
+		/* Gigabyte Spring Peak - defines wrong chassis type */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+		},
+	},
+	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
@@ -840,6 +851,12 @@
 {
 	int retval;
 
+#ifdef CONFIG_X86
+	/* Just return if pre-detection shows no i8042 controller exist */
+	if (!x86_platform.i8042_detect())
+		return -ENODEV;
+#endif
+
 /*
  * On ix86 platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on ix86 boxes.
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 2dc0c07..42ba369 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -508,7 +508,6 @@
 	}
 
 	input_dev->name = wacom_wac->name;
-	input_dev->name = wacom_wac->name;
 	input_dev->dev.parent = &intf->dev;
 	input_dev->open = wacom_open;
 	input_dev->close = wacom_close;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 847fd01..415f630 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -284,12 +284,13 @@
 			(data[4] << 20) + (data[5] << 12) +
 			(data[6] << 4) + (data[7] >> 4);
 
-		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
+			((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
 
-		switch (wacom->id[idx]) {
+		switch (wacom->id[idx] & 0xfffff) {
 		case 0x812: /* Inking pen */
 		case 0x801: /* Intuos3 Inking pen */
-		case 0x20802: /* Intuos4 Classic Pen */
+		case 0x20802: /* Intuos4 Inking Pen */
 		case 0x012:
 			wacom->tool[idx] = BTN_TOOL_PENCIL;
 			break;
@@ -300,7 +301,7 @@
 		case 0x823: /* Intuos3 Grip Pen */
 		case 0x813: /* Intuos3 Classic Pen */
 		case 0x885: /* Intuos3 Marker Pen */
-		case 0x802: /* Intuos4 Grip Pen Eraser */
+		case 0x802: /* Intuos4 General Pen */
 		case 0x804: /* Intuos4 Marker Pen */
 		case 0x40802: /* Intuos4 Classic Pen */
 		case 0x022:
@@ -335,7 +336,7 @@
 		case 0x81b: /* Intuos3 Classic Pen Eraser */
 		case 0x91b: /* Intuos3 Airbrush Eraser */
 		case 0x80c: /* Intuos4 Marker Pen Eraser */
-		case 0x80a: /* Intuos4 Grip Pen Eraser */
+		case 0x80a: /* Intuos4 General Pen Eraser */
 		case 0x4080a: /* Intuos4 Classic Pen Eraser */
 		case 0x90a: /* Intuos4 Airbrush Eraser */
 			wacom->tool[idx] = BTN_TOOL_RUBBER;
@@ -356,6 +357,11 @@
 		return 1;
 	}
 
+	/* older I4 styli don't work with new Cintiqs */
+	if (!((wacom->id[idx] >> 20) & 0x01) &&
+			(features->type == WACOM_21UX2))
+		return 1;
+
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
 		/*
@@ -474,21 +480,43 @@
 				input_report_abs(input, ABS_MISC, 0);
 			}
 		} else {
-			input_report_key(input, BTN_0, (data[5] & 0x01));
-			input_report_key(input, BTN_1, (data[5] & 0x02));
-			input_report_key(input, BTN_2, (data[5] & 0x04));
-			input_report_key(input, BTN_3, (data[5] & 0x08));
-			input_report_key(input, BTN_4, (data[6] & 0x01));
-			input_report_key(input, BTN_5, (data[6] & 0x02));
-			input_report_key(input, BTN_6, (data[6] & 0x04));
-			input_report_key(input, BTN_7, (data[6] & 0x08));
-			input_report_key(input, BTN_8, (data[5] & 0x10));
-			input_report_key(input, BTN_9, (data[6] & 0x10));
+			if (features->type == WACOM_21UX2) {
+				input_report_key(input, BTN_0, (data[5] & 0x01));
+				input_report_key(input, BTN_1, (data[6] & 0x01));
+				input_report_key(input, BTN_2, (data[6] & 0x02));
+				input_report_key(input, BTN_3, (data[6] & 0x04));
+				input_report_key(input, BTN_4, (data[6] & 0x08));
+				input_report_key(input, BTN_5, (data[6] & 0x10));
+				input_report_key(input, BTN_6, (data[6] & 0x20));
+				input_report_key(input, BTN_7, (data[6] & 0x40));
+				input_report_key(input, BTN_8, (data[6] & 0x80));
+				input_report_key(input, BTN_9, (data[7] & 0x01));
+				input_report_key(input, BTN_A, (data[8] & 0x01));
+				input_report_key(input, BTN_B, (data[8] & 0x02));
+				input_report_key(input, BTN_C, (data[8] & 0x04));
+				input_report_key(input, BTN_X, (data[8] & 0x08));
+				input_report_key(input, BTN_Y, (data[8] & 0x10));
+				input_report_key(input, BTN_Z, (data[8] & 0x20));
+				input_report_key(input, BTN_BASE, (data[8] & 0x40));
+				input_report_key(input, BTN_BASE2, (data[8] & 0x80));
+			} else {
+				input_report_key(input, BTN_0, (data[5] & 0x01));
+				input_report_key(input, BTN_1, (data[5] & 0x02));
+				input_report_key(input, BTN_2, (data[5] & 0x04));
+				input_report_key(input, BTN_3, (data[5] & 0x08));
+				input_report_key(input, BTN_4, (data[6] & 0x01));
+				input_report_key(input, BTN_5, (data[6] & 0x02));
+				input_report_key(input, BTN_6, (data[6] & 0x04));
+				input_report_key(input, BTN_7, (data[6] & 0x08));
+				input_report_key(input, BTN_8, (data[5] & 0x10));
+				input_report_key(input, BTN_9, (data[6] & 0x10));
+			}
 			input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
 			input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
 
-			if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
-				data[2] | (data[3] & 0x1f) | data[4]) {
+			if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
+				data[2] | (data[3] & 0x1f) | data[4] | data[8] |
+				(data[7] & 0x01)) {
 				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
@@ -640,7 +668,7 @@
 	if (!idx)
 		input_report_key(input, BTN_TOUCH, 1);
 	input_event(input, EV_MSC, MSC_SERIAL, finger);
-	input_sync(wacom->input);
+	input_sync(input);
 
 	wacom->last_finger = finger;
 }
@@ -826,6 +854,7 @@
 	case INTUOS4L:
 	case CINTIQ:
 	case WACOM_BEE:
+	case WACOM_21UX2:
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
@@ -921,6 +950,17 @@
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
 		break;
 
+	case WACOM_21UX2:
+		__set_bit(BTN_A, input_dev->keybit);
+		__set_bit(BTN_B, input_dev->keybit);
+		__set_bit(BTN_C, input_dev->keybit);
+		__set_bit(BTN_X, input_dev->keybit);
+		__set_bit(BTN_Y, input_dev->keybit);
+		__set_bit(BTN_Z, input_dev->keybit);
+		__set_bit(BTN_BASE, input_dev->keybit);
+		__set_bit(BTN_BASE2, input_dev->keybit);
+		/* fall through */
+
 	case WACOM_BEE:
 		__set_bit(BTN_8, input_dev->keybit);
 		__set_bit(BTN_9, input_dev->keybit);
@@ -1105,6 +1145,8 @@
 	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L };
 static const struct wacom_features wacom_features_0xBB =
 	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0xBC =
+	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047, 63, INTUOS4 };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ };
 static const struct wacom_features wacom_features_0xC5 =
@@ -1113,6 +1155,8 @@
 	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
 static const struct wacom_features wacom_features_0xC7 =
 	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+static const struct wacom_features wacom_features_0xCC =
+	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047, 63, WACOM_21UX2 };
 static const struct wacom_features wacom_features_0x90 =
 	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
 static const struct wacom_features wacom_features_0x93 =
@@ -1185,10 +1229,12 @@
 	{ USB_DEVICE_WACOM(0xB9) },
 	{ USB_DEVICE_WACOM(0xBA) },
 	{ USB_DEVICE_WACOM(0xBB) },
+	{ USB_DEVICE_WACOM(0xBC) },
 	{ USB_DEVICE_WACOM(0x3F) },
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
 	{ USB_DEVICE_WACOM(0xC7) },
+	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
 	{ USB_DEVICE_WACOM(0x93) },
 	{ USB_DEVICE_WACOM(0x9A) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 063f1af..854b920 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -50,6 +50,7 @@
 	INTUOS4S,
 	INTUOS4,
 	INTUOS4L,
+	WACOM_21UX2,
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6703c6b..3b9d5e2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -156,7 +156,7 @@
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
 	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
-	select S3C24XX_ADC
+	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
 
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 0d2d7e5..5f0221c 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -679,6 +679,13 @@
 		return -EINVAL;
 	}
 
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+		dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+		return err;
+	}
+
 	ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!ts || !input_dev) {
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 634f6f6..a9fdf55 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1164,7 +1164,7 @@
 	ts->reg = regulator_get(&spi->dev, "vcc");
 	if (IS_ERR(ts->reg)) {
 		err = PTR_ERR(ts->reg);
-		dev_err(&spi->dev, "unable to get regulator: %ld\n", err);
+		dev_err(&spi->dev, "unable to get regulator: %d\n", err);
 		goto err_free_gpio;
 	}
 
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index ac5d0f9..6085d12 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -173,7 +173,7 @@
 	if (down)
 		s3c_adc_start(ts.client, 0, 1 << ts.shift);
 	else
-		dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+		dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count);
 
 	if (ts.features & FEAT_PEN_IRQ) {
 		/* Clear pen down/up interrupt */
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index 5de80a1..5b70a14 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -221,7 +221,7 @@
 
 	if (poll) {
 		schd = queue_delayed_work(tsc->wq, &tsc->work,
-					  tsc->poll_period * HZ / 1000);
+					  msecs_to_jiffies(tsc->poll_period));
 		if (schd)
 			tsc->polling = 1;
 		else {
@@ -326,7 +326,7 @@
 		goto err2;
 
 	schd = queue_delayed_work(tsc->wq, &tsc->work,
-				  tsc->poll_period * HZ / 1000);
+				  msecs_to_jiffies(tsc->poll_period));
 
 	if (schd)
 		tsc->polling = 1;
@@ -339,10 +339,8 @@
 	return 0;
 
 err2:
-	cancel_delayed_work(&tsc->work);
-	flush_workqueue(tsc->wq);
+	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
-	tsc->wq = 0;
 	input_free_device(input_dev);
 err1:
 	kfree(tsc);
@@ -360,10 +358,8 @@
 	if (!tsc)
 		return 0;
 
-	cancel_delayed_work(&tsc->work);
-	flush_workqueue(tsc->wq);
+	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
-	tsc->wq = 0;
 
 	input_free_device(input_dev);
 
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index cc18265b..7a45d68 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -233,7 +233,7 @@
 	w90p910_ts->state = TS_IDLE;
 	spin_lock_init(&w90p910_ts->lock);
 	setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
-		    (unsigned long)&w90p910_ts);
+		    (unsigned long)w90p910_ts);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index bde3c88..b054494d 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -1020,12 +1020,12 @@
 		if (cmd == AVMB1_ADDCARD) {
 		   if ((retval = copy_from_user(&cdef, data,
 					    sizeof(avmb1_carddef))))
-			   return retval;
+			   return -EFAULT;
 		   cdef.cardtype = AVM_CARDTYPE_B1;
 		} else {
 		   if ((retval = copy_from_user(&cdef, data,
 					    sizeof(avmb1_extcarddef))))
-			   return retval;
+			   return -EFAULT;
 		}
 		cparams.port = cdef.port;
 		cparams.irq = cdef.irq;
@@ -1218,7 +1218,7 @@
 		kcapi_carddef cdef;
 
 		if ((retval = copy_from_user(&cdef, data, sizeof(cdef))))
-			return retval;
+			return -EFAULT;
 
 		cparams.port = cdef.port;
 		cparams.irq = cdef.irq;
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index c5016bd..c3b1dc3 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -126,26 +126,6 @@
 	return numbytes;
 }
 
-/* set up next receive skb for data mode
- */
-static void new_rcv_skb(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	unsigned short hw_hdr_len = cs->hw_hdr_len;
-
-	if (bcs->ignore) {
-		bcs->skb = NULL;
-		return;
-	}
-
-	bcs->skb = dev_alloc_skb(SBUFSIZE + hw_hdr_len);
-	if (bcs->skb == NULL) {
-		dev_warn(cs->dev, "could not allocate new skb\n");
-		return;
-	}
-	skb_reserve(bcs->skb, hw_hdr_len);
-}
-
 /* process a block of received bytes in HDLC data mode
  * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
  * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
@@ -159,8 +139,8 @@
 	struct cardstate *cs = inbuf->cs;
 	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
-	__u16 fcs = bcs->fcs;
-	struct sk_buff *skb = bcs->skb;
+	__u16 fcs = bcs->rx_fcs;
+	struct sk_buff *skb = bcs->rx_skb;
 	unsigned char *src = inbuf->data + inbuf->head;
 	unsigned procbytes = 0;
 	unsigned char c;
@@ -245,8 +225,7 @@
 
 				/* prepare reception of next frame */
 				inputstate &= ~INS_have_data;
-				new_rcv_skb(bcs);
-				skb = bcs->skb;
+				skb = gigaset_new_rx_skb(bcs);
 			} else {
 				/* empty frame (7E 7E) */
 #ifdef CONFIG_GIGASET_DEBUG
@@ -255,8 +234,7 @@
 				if (!skb) {
 					/* skipped (?) */
 					gigaset_isdn_rcv_err(bcs);
-					new_rcv_skb(bcs);
-					skb = bcs->skb;
+					skb = gigaset_new_rx_skb(bcs);
 				}
 			}
 
@@ -279,11 +257,11 @@
 #endif
 		inputstate |= INS_have_data;
 		if (skb) {
-			if (skb->len == SBUFSIZE) {
+			if (skb->len >= bcs->rx_bufsize) {
 				dev_warn(cs->dev, "received packet too long\n");
 				dev_kfree_skb_any(skb);
 				/* skip remainder of packet */
-				bcs->skb = skb = NULL;
+				bcs->rx_skb = skb = NULL;
 			} else {
 				*__skb_put(skb, 1) = c;
 				fcs = crc_ccitt_byte(fcs, c);
@@ -292,7 +270,7 @@
 	}
 
 	bcs->inputstate = inputstate;
-	bcs->fcs = fcs;
+	bcs->rx_fcs = fcs;
 	return procbytes;
 }
 
@@ -308,18 +286,18 @@
 	struct cardstate *cs = inbuf->cs;
 	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
-	struct sk_buff *skb = bcs->skb;
+	struct sk_buff *skb = bcs->rx_skb;
 	unsigned char *src = inbuf->data + inbuf->head;
 	unsigned procbytes = 0;
 	unsigned char c;
 
 	if (!skb) {
 		/* skip this block */
-		new_rcv_skb(bcs);
+		gigaset_new_rx_skb(bcs);
 		return numbytes;
 	}
 
-	while (procbytes < numbytes && skb->len < SBUFSIZE) {
+	while (procbytes < numbytes && skb->len < bcs->rx_bufsize) {
 		c = *src++;
 		procbytes++;
 
@@ -343,7 +321,7 @@
 	if (inputstate & INS_have_data) {
 		gigaset_skb_rcvd(bcs, skb);
 		inputstate &= ~INS_have_data;
-		new_rcv_skb(bcs);
+		gigaset_new_rx_skb(bcs);
 	}
 
 	bcs->inputstate = inputstate;
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index 8f78f15..6fbe899 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -70,7 +70,7 @@
 #define MAX_NUMBER_DIGITS 20
 #define MAX_FMT_IE_LEN 20
 
-/* values for gigaset_capi_appl.connected */
+/* values for bcs->apconnstate */
 #define APCONN_NONE	0	/* inactive/listening */
 #define APCONN_SETUP	1	/* connecting */
 #define APCONN_ACTIVE	2	/* B channel up */
@@ -80,10 +80,10 @@
 	struct list_head ctrlist;
 	struct gigaset_capi_appl *bcnext;
 	u16 id;
+	struct capi_register_params rp;
 	u16 nextMessageNumber;
 	u32 listenInfoMask;
 	u32 listenCIPmask;
-	int connected;
 };
 
 /* CAPI specific controller data structure */
@@ -319,6 +319,39 @@
 	return result;
 }
 
+/*
+ * emit DATA_B3_CONF message
+ */
+static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr,
+			      u16 appl, u16 msgid, int channel,
+			      u16 handle, u16 info)
+{
+	struct sk_buff *cskb;
+	u8 *msg;
+
+	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	/* frequent message, avoid _cmsg overhead */
+	msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETAPPID(msg, appl);
+	CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(msg,  CAPI_CONF);
+	CAPIMSG_SETMSGID(msg, msgid);
+	CAPIMSG_SETCONTROLLER(msg, ctr->cnr);
+	CAPIMSG_SETPLCI_PART(msg, channel);
+	CAPIMSG_SETNCCI_PART(msg, 1);
+	CAPIMSG_SETHANDLE_CONF(msg, handle);
+	CAPIMSG_SETINFO_CONF(msg, info);
+
+	/* emit message */
+	dump_rawmsg(DEBUG_MCMD, __func__, msg);
+	capi_ctr_handle_message(ctr, appl, cskb);
+}
+
 
 /*
  * driver interface functions
@@ -339,7 +372,6 @@
 	struct gigaset_capi_ctr *iif = cs->iif;
 	struct gigaset_capi_appl *ap = bcs->ap;
 	unsigned char *req = skb_mac_header(dskb);
-	struct sk_buff *cskb;
 	u16 flags;
 
 	/* update statistics */
@@ -351,39 +383,22 @@
 	}
 
 	/* don't send further B3 messages if disconnected */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		gig_dbg(DEBUG_LLDATA, "disconnected, discarding ack");
 		return;
 	}
 
-	/* ToDo: honor unset "delivery confirmation" bit */
+	/*
+	 * send DATA_B3_CONF if "delivery confirmation" bit was set in request;
+	 * otherwise it has already been sent by do_data_b3_req()
+	 */
 	flags = CAPIMSG_FLAGS(req);
-
-	/* build DATA_B3_CONF message */
-	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
-	if (!cskb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	/* frequent message, avoid _cmsg overhead */
-	CAPIMSG_SETLEN(cskb->data, CAPI_DATA_B3_CONF_LEN);
-	CAPIMSG_SETAPPID(cskb->data, ap->id);
-	CAPIMSG_SETCOMMAND(cskb->data, CAPI_DATA_B3);
-	CAPIMSG_SETSUBCOMMAND(cskb->data,  CAPI_CONF);
-	CAPIMSG_SETMSGID(cskb->data, CAPIMSG_MSGID(req));
-	CAPIMSG_SETCONTROLLER(cskb->data, iif->ctr.cnr);
-	CAPIMSG_SETPLCI_PART(cskb->data, bcs->channel + 1);
-	CAPIMSG_SETNCCI_PART(cskb->data, 1);
-	CAPIMSG_SETHANDLE_CONF(cskb->data, CAPIMSG_HANDLE_REQ(req));
-	if (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION)
-		CAPIMSG_SETINFO_CONF(cskb->data,
-				     CapiFlagsNotSupportedByProtocol);
-	else
-		CAPIMSG_SETINFO_CONF(cskb->data, CAPI_NOERROR);
-
-	/* emit message */
-	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_CONF", cskb->data);
-	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+	if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)
+		send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req),
+				  bcs->channel + 1, CAPIMSG_HANDLE_REQ(req),
+				  (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ?
+					CapiFlagsNotSupportedByProtocol :
+					CAPI_NOERROR);
 }
 EXPORT_SYMBOL_GPL(gigaset_skb_sent);
 
@@ -412,7 +427,7 @@
 	}
 
 	/* don't send further B3 messages if disconnected */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		gig_dbg(DEBUG_LLDATA, "disconnected, discarding data");
 		dev_kfree_skb_any(skb);
 		return;
@@ -484,6 +499,7 @@
 	u32 actCIPmask;
 	struct sk_buff *skb;
 	unsigned int msgsize;
+	unsigned long flags;
 	int i;
 
 	/*
@@ -608,7 +624,14 @@
 		format_ie(iif->hcmsg.CalledPartyNumber));
 
 	/* scan application list for matching listeners */
-	bcs->ap = NULL;
+	spin_lock_irqsave(&bcs->aplock, flags);
+	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) {
+		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+			 __func__, bcs->ap, bcs->apconnstate);
+		bcs->ap = NULL;
+		bcs->apconnstate = APCONN_NONE;
+	}
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
 	list_for_each_entry(ap, &iif->appls, ctrlist)
 		if (actCIPmask & ap->listenCIPmask) {
@@ -626,10 +649,12 @@
 			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
 
 			/* add to listeners on this B channel, update state */
+			spin_lock_irqsave(&bcs->aplock, flags);
 			ap->bcnext = bcs->ap;
 			bcs->ap = ap;
 			bcs->chstate |= CHS_NOTIFY_LL;
-			ap->connected = APCONN_SETUP;
+			bcs->apconnstate = APCONN_SETUP;
+			spin_unlock_irqrestore(&bcs->aplock, flags);
 
 			/* emit message */
 			capi_ctr_handle_message(&iif->ctr, ap->id, skb);
@@ -654,7 +679,7 @@
 	struct gigaset_capi_ctr *iif = cs->iif;
 	struct sk_buff *skb;
 
-	if (ap->connected == APCONN_NONE)
+	if (bcs->apconnstate == APCONN_NONE)
 		return;
 
 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
@@ -668,7 +693,6 @@
 	}
 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN));
 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	ap->connected = APCONN_NONE;
 	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
 }
 
@@ -685,9 +709,9 @@
 	struct sk_buff *skb;
 
 	/* nothing to do if no logical connection active */
-	if (ap->connected < APCONN_ACTIVE)
+	if (bcs->apconnstate < APCONN_ACTIVE)
 		return;
-	ap->connected = APCONN_SETUP;
+	bcs->apconnstate = APCONN_SETUP;
 
 	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
 			 ap->nextMessageNumber++,
@@ -714,14 +738,25 @@
 {
 	struct cardstate *cs = bcs->cs;
 	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
+	struct gigaset_capi_appl *ap;
 	struct sk_buff *skb;
 	unsigned int msgsize;
+	unsigned long flags;
 
+	spin_lock_irqsave(&bcs->aplock, flags);
+	ap = bcs->ap;
 	if (!ap) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: no application\n", __func__);
 		return;
 	}
+	if (bcs->apconnstate == APCONN_NONE) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 	while (ap->bcnext) {
 		/* this should never happen */
 		dev_warn(cs->dev, "%s: dropping extra application %u\n",
@@ -730,11 +765,6 @@
 				    CapiCallGivenToOtherApplication);
 		ap->bcnext = ap->bcnext->bcnext;
 	}
-	if (ap->connected == APCONN_NONE) {
-		dev_warn(cs->dev, "%s: application %u not connected\n",
-			 __func__, ap->id);
-		return;
-	}
 
 	/* prepare CONNECT_ACTIVE_IND message
 	 * Note: LLC not supported by device
@@ -772,17 +802,24 @@
 void gigaset_isdn_hupD(struct bc_state *bcs)
 {
 	struct gigaset_capi_appl *ap;
+	unsigned long flags;
 
 	/*
 	 * ToDo: pass on reason code reported by device
 	 * (requires ev-layer state machine extension to collect
 	 * ZCAU device reply)
 	 */
-	for (ap = bcs->ap; ap != NULL; ap = ap->bcnext) {
+	spin_lock_irqsave(&bcs->aplock, flags);
+	while (bcs->ap != NULL) {
+		ap = bcs->ap;
+		bcs->ap = ap->bcnext;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		send_disconnect_b3_ind(bcs, ap);
 		send_disconnect_ind(bcs, ap, 0);
+		spin_lock_irqsave(&bcs->aplock, flags);
 	}
-	bcs->ap = NULL;
+	bcs->apconnstate = APCONN_NONE;
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 }
 
 /**
@@ -796,24 +833,21 @@
 {
 	struct cardstate *cs = bcs->cs;
 	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
+	struct gigaset_capi_appl *ap;
 	struct sk_buff *skb;
+	unsigned long flags;
 	unsigned int msgsize;
 	u8 command;
 
+	spin_lock_irqsave(&bcs->aplock, flags);
+	ap = bcs->ap;
 	if (!ap) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: no application\n", __func__);
 		return;
 	}
-	while (ap->bcnext) {
-		/* this should never happen */
-		dev_warn(cs->dev, "%s: dropping extra application %u\n",
-			 __func__, ap->bcnext->id);
-		send_disconnect_ind(bcs, ap->bcnext,
-				    CapiCallGivenToOtherApplication);
-		ap->bcnext = ap->bcnext->bcnext;
-	}
-	if (!ap->connected) {
+	if (!bcs->apconnstate) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_warn(cs->dev, "%s: application %u not connected\n",
 			 __func__, ap->id);
 		return;
@@ -825,13 +859,26 @@
 	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
 	 * Parameters in both cases always: NCCI = 1, NCPI empty
 	 */
-	if (ap->connected >= APCONN_ACTIVE) {
+	if (bcs->apconnstate >= APCONN_ACTIVE) {
 		command = CAPI_CONNECT_B3_ACTIVE;
 		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
 	} else {
 		command = CAPI_CONNECT_B3;
 		msgsize = CAPI_CONNECT_B3_IND_BASELEN;
 	}
+	bcs->apconnstate = APCONN_ACTIVE;
+
+	spin_unlock_irqrestore(&bcs->aplock, flags);
+
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+
 	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
 			 ap->nextMessageNumber++,
 			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
@@ -842,7 +889,6 @@
 	}
 	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
 	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	ap->connected = APCONN_ACTIVE;
 	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
 }
 
@@ -945,8 +991,64 @@
 		return;
 	}
 	ap->id = appl;
+	ap->rp = *rp;
 
 	list_add(&ap->ctrlist, &iif->appls);
+	dev_info(cs->dev, "application %u registered\n", ap->id);
+}
+
+/*
+ * remove CAPI application from channel
+ * helper function to keep indentation levels down and stay in 80 columns
+ */
+
+static inline void remove_appl_from_channel(struct bc_state *bcs,
+					    struct gigaset_capi_appl *ap)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_appl *bcap;
+	unsigned long flags;
+	int prevconnstate;
+
+	spin_lock_irqsave(&bcs->aplock, flags);
+	bcap = bcs->ap;
+	if (bcap == NULL) {
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+		return;
+	}
+
+	/* check first application on channel */
+	if (bcap == ap) {
+		bcs->ap = ap->bcnext;
+		if (bcs->ap != NULL) {
+			spin_unlock_irqrestore(&bcs->aplock, flags);
+			return;
+		}
+
+		/* none left, clear channel state */
+		prevconnstate = bcs->apconnstate;
+		bcs->apconnstate = APCONN_NONE;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+
+		if (prevconnstate == APCONN_ACTIVE) {
+			dev_notice(cs->dev, "%s: hanging up channel %u\n",
+				   __func__, bcs->channel);
+			gigaset_add_event(cs, &bcs->at_state,
+					  EV_HUP, NULL, 0, NULL);
+			gigaset_schedule_event(cs);
+		}
+		return;
+	}
+
+	/* check remaining list */
+	do {
+		if (bcap->bcnext == ap) {
+			bcap->bcnext = bcap->bcnext->bcnext;
+			return;
+		}
+		bcap = bcap->bcnext;
+	} while (bcap != NULL);
+	spin_unlock_irqrestore(&bcs->aplock, flags);
 }
 
 /*
@@ -958,19 +1060,19 @@
 		= container_of(ctr, struct gigaset_capi_ctr, ctr);
 	struct cardstate *cs = iif->ctr.driverdata;
 	struct gigaset_capi_appl *ap, *tmp;
+	unsigned ch;
 
 	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
 		if (ap->id == appl) {
-			if (ap->connected != APCONN_NONE) {
-				dev_err(cs->dev,
-					"%s: application %u still connected\n",
-					__func__, ap->id);
-				/* ToDo: clear active connection */
-			}
+			/* remove from any channels */
+			for (ch = 0; ch < cs->channels; ch++)
+				remove_appl_from_channel(&cs->bcs[ch], ap);
+
+			/* remove from registration list */
 			list_del(&ap->ctrlist);
 			kfree(ap);
+			dev_info(cs->dev, "application %u released\n", appl);
 		}
-
 }
 
 /*
@@ -1149,7 +1251,8 @@
 	char **commands;
 	char *s;
 	u8 *pp;
-	int i, l;
+	unsigned long flags;
+	int i, l, lbc, lhlc;
 	u16 info;
 
 	/* decode message */
@@ -1164,8 +1267,18 @@
 		send_conf(iif, ap, skb, CapiNoPlciAvailable);
 		return;
 	}
+	spin_lock_irqsave(&bcs->aplock, flags);
+	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE)
+		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
+			 __func__, bcs->ap, bcs->apconnstate);
 	ap->bcnext = NULL;
 	bcs->ap = ap;
+	bcs->apconnstate = APCONN_SETUP;
+	spin_unlock_irqrestore(&bcs->aplock, flags);
+
+	bcs->rx_bufsize = ap->rp.datablklen;
+	dev_kfree_skb(bcs->rx_skb);
+	gigaset_new_rx_skb(bcs);
 	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
 
 	/* build command table */
@@ -1273,42 +1386,59 @@
 		goto error;
 	}
 
-	/* check/encode parameter: BC */
-	if (cmsg->BC && cmsg->BC[0]) {
-		/* explicit BC overrides CIP */
-		l = 2*cmsg->BC[0] + 7;
+	/*
+	 * check/encode parameters: BC & HLC
+	 * must be encoded together as device doesn't accept HLC separately
+	 * explicit parameters override values derived from CIP
+	 */
+
+	/* determine lengths */
+	if (cmsg->BC && cmsg->BC[0])		/* BC specified explicitly */
+		lbc = 2*cmsg->BC[0];
+	else if (cip2bchlc[cmsg->CIPValue].bc)	/* BC derived from CIP */
+		lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
+	else					/* no BC */
+		lbc = 0;
+	if (cmsg->HLC && cmsg->HLC[0])		/* HLC specified explicitly */
+		lhlc = 2*cmsg->HLC[0];
+	else if (cip2bchlc[cmsg->CIPValue].hlc)	/* HLC derived from CIP */
+		lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
+	else					/* no HLC */
+		lhlc = 0;
+
+	if (lbc) {
+		/* have BC: allocate and assemble command string */
+		l = lbc + 7;		/* "^SBC=" + value + "\r" + null byte */
+		if (lhlc)
+			l += lhlc + 7;	/* ";^SHLC=" + value */
 		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
 		if (!commands[AT_BC])
 			goto oom;
 		strcpy(commands[AT_BC], "^SBC=");
-		decode_ie(cmsg->BC, commands[AT_BC]+5);
+		if (cmsg->BC && cmsg->BC[0])	/* BC specified explicitly */
+			decode_ie(cmsg->BC, commands[AT_BC] + 5);
+		else				/* BC derived from CIP */
+			strcpy(commands[AT_BC] + 5,
+			       cip2bchlc[cmsg->CIPValue].bc);
+		if (lhlc) {
+			strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
+			if (cmsg->HLC && cmsg->HLC[0])
+				/* HLC specified explicitly */
+				decode_ie(cmsg->HLC,
+					  commands[AT_BC] + lbc + 12);
+			else	/* HLC derived from CIP */
+				strcpy(commands[AT_BC] + lbc + 12,
+				       cip2bchlc[cmsg->CIPValue].hlc);
+		}
 		strcpy(commands[AT_BC] + l - 2, "\r");
-	} else if (cip2bchlc[cmsg->CIPValue].bc) {
-		l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
-		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_BC])
-			goto oom;
-		snprintf(commands[AT_BC], l, "^SBC=%s\r",
-			 cip2bchlc[cmsg->CIPValue].bc);
-	}
-
-	/* check/encode parameter: HLC */
-	if (cmsg->HLC && cmsg->HLC[0]) {
-		/* explicit HLC overrides CIP */
-		l = 2*cmsg->HLC[0] + 7;
-		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_HLC])
-			goto oom;
-		strcpy(commands[AT_HLC], "^SHLC=");
-		decode_ie(cmsg->HLC, commands[AT_HLC]+5);
-		strcpy(commands[AT_HLC] + l - 2, "\r");
-	} else if (cip2bchlc[cmsg->CIPValue].hlc) {
-		l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
-		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_HLC])
-			goto oom;
-		snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
-			 cip2bchlc[cmsg->CIPValue].hlc);
+	} else {
+		/* no BC */
+		if (lhlc) {
+			dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
+				   "CONNECT_REQ");
+			info = CapiIllMessageParmCoding; /* ? */
+			goto error;
+		}
 	}
 
 	/* check/encode parameter: B Protocol */
@@ -1322,13 +1452,13 @@
 			bcs->proto2 = L2_HDLC;
 			break;
 		case 1:
-			bcs->proto2 = L2_BITSYNC;
+			bcs->proto2 = L2_VOICE;
 			break;
 		default:
 			dev_warn(cs->dev,
 			    "B1 Protocol %u unsupported, using Transparent\n",
 				 cmsg->B1protocol);
-			bcs->proto2 = L2_BITSYNC;
+			bcs->proto2 = L2_VOICE;
 		}
 		if (cmsg->B2protocol != 1)
 			dev_warn(cs->dev,
@@ -1382,7 +1512,6 @@
 		goto error;
 	}
 	gigaset_schedule_event(cs);
-	ap->connected = APCONN_SETUP;
 	send_conf(iif, ap, skb, CapiSuccess);
 	return;
 
@@ -1410,6 +1539,7 @@
 	_cmsg *cmsg = &iif->acmsg;
 	struct bc_state *bcs;
 	struct gigaset_capi_appl *oap;
+	unsigned long flags;
 	int channel;
 
 	/* decode message */
@@ -1429,12 +1559,24 @@
 	switch (cmsg->Reject) {
 	case 0:		/* Accept */
 		/* drop all competing applications, keep only this one */
-		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
-			if (oap != ap)
+		spin_lock_irqsave(&bcs->aplock, flags);
+		while (bcs->ap != NULL) {
+			oap = bcs->ap;
+			bcs->ap = oap->bcnext;
+			if (oap != ap) {
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				send_disconnect_ind(bcs, oap,
 					CapiCallGivenToOtherApplication);
+				spin_lock_irqsave(&bcs->aplock, flags);
+			}
+		}
 		ap->bcnext = NULL;
 		bcs->ap = ap;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
+
+		bcs->rx_bufsize = ap->rp.datablklen;
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 		bcs->chstate |= CHS_NOTIFY_LL;
 
 		/* check/encode B channel protocol */
@@ -1448,13 +1590,13 @@
 				bcs->proto2 = L2_HDLC;
 				break;
 			case 1:
-				bcs->proto2 = L2_BITSYNC;
+				bcs->proto2 = L2_VOICE;
 				break;
 			default:
 				dev_warn(cs->dev,
 			"B1 Protocol %u unsupported, using Transparent\n",
 					 cmsg->B1protocol);
-				bcs->proto2 = L2_BITSYNC;
+				bcs->proto2 = L2_VOICE;
 			}
 			if (cmsg->B2protocol != 1)
 				dev_warn(cs->dev,
@@ -1502,31 +1644,45 @@
 		send_disconnect_ind(bcs, ap, 0);
 
 		/* remove it from the list of listening apps */
+		spin_lock_irqsave(&bcs->aplock, flags);
 		if (bcs->ap == ap) {
 			bcs->ap = ap->bcnext;
-			if (bcs->ap == NULL)
+			if (bcs->ap == NULL) {
 				/* last one: stop ev-layer hupD notifications */
+				bcs->apconnstate = APCONN_NONE;
 				bcs->chstate &= ~CHS_NOTIFY_LL;
+			}
+			spin_unlock_irqrestore(&bcs->aplock, flags);
 			return;
 		}
 		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
 			if (oap->bcnext == ap) {
 				oap->bcnext = oap->bcnext->bcnext;
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				return;
 			}
 		}
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 		dev_err(cs->dev, "%s: application %u not found\n",
 			__func__, ap->id);
 		return;
 
 	default:		/* Reject */
 		/* drop all competing applications, keep only this one */
-		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
-			if (oap != ap)
+		spin_lock_irqsave(&bcs->aplock, flags);
+		while (bcs->ap != NULL) {
+			oap = bcs->ap;
+			bcs->ap = oap->bcnext;
+			if (oap != ap) {
+				spin_unlock_irqrestore(&bcs->aplock, flags);
 				send_disconnect_ind(bcs, oap,
 					CapiCallGivenToOtherApplication);
+				spin_lock_irqsave(&bcs->aplock, flags);
+			}
+		}
 		ap->bcnext = NULL;
 		bcs->ap = ap;
+		spin_unlock_irqrestore(&bcs->aplock, flags);
 
 		/* reject call - will trigger DISCONNECT_IND for this app */
 		dev_info(cs->dev, "%s: Reject=%x\n",
@@ -1549,6 +1705,7 @@
 {
 	struct cardstate *cs = iif->ctr.driverdata;
 	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
 	int channel;
 
 	/* decode message */
@@ -1563,9 +1720,10 @@
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 
 	/* mark logical connection active */
-	ap->connected = APCONN_ACTIVE;
+	bcs->apconnstate = APCONN_ACTIVE;
 
 	/* build NCCI: always 1 (one B3 connection only) */
 	cmsg->adr.adrNCCI |= 1 << 16;
@@ -1611,7 +1769,7 @@
 
 	if (cmsg->Reject) {
 		/* Reject: clear B3 connect received flag */
-		ap->connected = APCONN_SETUP;
+		bcs->apconnstate = APCONN_SETUP;
 
 		/* trigger hangup, causing eventual DISCONNECT_IND */
 		if (!gigaset_add_event(cs, &bcs->at_state,
@@ -1683,11 +1841,11 @@
 	}
 
 	/* skip if DISCONNECT_IND already sent */
-	if (!ap->connected)
+	if (!bcs->apconnstate)
 		return;
 
 	/* check for active logical connection */
-	if (ap->connected >= APCONN_ACTIVE) {
+	if (bcs->apconnstate >= APCONN_ACTIVE) {
 		/*
 		 * emit DISCONNECT_B3_IND with cause 0x3301
 		 * use separate cmsg structure, as the content of iif->acmsg
@@ -1736,6 +1894,7 @@
 {
 	struct cardstate *cs = iif->ctr.driverdata;
 	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
 	int channel;
 
 	/* decode message */
@@ -1751,17 +1910,17 @@
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 
 	/* reject if logical connection not active */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		send_conf(iif, ap, skb,
 			  CapiMessageNotSupportedInCurrentState);
 		return;
 	}
 
 	/* trigger hangup, causing eventual DISCONNECT_B3_IND */
-	if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
-			       EV_HUP, NULL, 0, NULL)) {
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
 		return;
 	}
@@ -1782,11 +1941,14 @@
 			   struct sk_buff *skb)
 {
 	struct cardstate *cs = iif->ctr.driverdata;
+	struct bc_state *bcs;
 	int channel = CAPIMSG_PLCI_PART(skb->data);
 	u16 ncci = CAPIMSG_NCCI_PART(skb->data);
 	u16 msglen = CAPIMSG_LEN(skb->data);
 	u16 datalen = CAPIMSG_DATALEN(skb->data);
 	u16 flags = CAPIMSG_FLAGS(skb->data);
+	u16 msgid = CAPIMSG_MSGID(skb->data);
+	u16 handle = CAPIMSG_HANDLE_REQ(skb->data);
 
 	/* frequent message, avoid _cmsg overhead */
 	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_REQ", skb->data);
@@ -1802,6 +1964,7 @@
 		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
 		return;
 	}
+	bcs = &cs->bcs[channel-1];
 	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
 		dev_notice(cs->dev, "%s: unexpected length %d\n",
 			   "DATA_B3_REQ", msglen);
@@ -1821,7 +1984,7 @@
 	}
 
 	/* reject if logical connection not active */
-	if (ap->connected < APCONN_ACTIVE) {
+	if (bcs->apconnstate < APCONN_ACTIVE) {
 		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
 		return;
 	}
@@ -1832,17 +1995,19 @@
 	skb_pull(skb, msglen);
 
 	/* pass to device-specific module */
-	if (cs->ops->send_skb(&cs->bcs[channel-1], skb) < 0) {
+	if (cs->ops->send_skb(bcs, skb) < 0) {
 		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
 		return;
 	}
 
-	/* DATA_B3_CONF reply will be sent by gigaset_skb_sent() */
-
 	/*
-	 * ToDo: honor unset "delivery confirmation" bit
-	 * (send DATA_B3_CONF immediately?)
+	 * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery
+	 * confirmation" bit is set; otherwise we have to send it now
 	 */
+	if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION))
+		send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle,
+				  flags ? CapiFlagsNotSupportedByProtocol
+					: CAPI_NOERROR);
 }
 
 /*
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index f6f45f2..5d4befb 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -399,8 +399,8 @@
 	gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
 	clear_at_state(&bcs->at_state);
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
-	dev_kfree_skb(bcs->skb);
-	bcs->skb = NULL;
+	dev_kfree_skb(bcs->rx_skb);
+	bcs->rx_skb = NULL;
 
 	for (i = 0; i < AT_NUM; ++i) {
 		kfree(bcs->commands[i]);
@@ -634,19 +634,10 @@
 	bcs->emptycount = 0;
 #endif
 
-	gig_dbg(DEBUG_INIT, "allocating bcs[%d]->skb", channel);
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_bufsize = 0;
+	bcs->rx_skb = NULL;
+	bcs->rx_fcs = PPP_INITFCS;
 	bcs->inputstate = 0;
-	if (cs->ignoreframes) {
-		bcs->skb = NULL;
-	} else {
-		bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-		if (bcs->skb != NULL)
-			skb_reserve(bcs->skb, cs->hw_hdr_len);
-		else
-			pr_err("out of memory\n");
-	}
-
 	bcs->channel = channel;
 	bcs->cs = cs;
 
@@ -658,16 +649,15 @@
 	for (i = 0; i < AT_NUM; ++i)
 		bcs->commands[i] = NULL;
 
+	spin_lock_init(&bcs->aplock);
+	bcs->ap = NULL;
+	bcs->apconnstate = 0;
+
 	gig_dbg(DEBUG_INIT, "  setting up bcs[%d]->hw", channel);
 	if (cs->ops->initbcshw(bcs))
 		return bcs;
 
 	gig_dbg(DEBUG_INIT, "  failed");
-
-	gig_dbg(DEBUG_INIT, "  freeing bcs[%d]->skb", channel);
-	dev_kfree_skb(bcs->skb);
-	bcs->skb = NULL;
-
 	return NULL;
 }
 
@@ -839,14 +829,12 @@
 	bcs->emptycount = 0;
 #endif
 
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_fcs = PPP_INITFCS;
 	bcs->chstate = 0;
 
 	bcs->ignore = cs->ignoreframes;
-	if (bcs->ignore) {
-		dev_kfree_skb(bcs->skb);
-		bcs->skb = NULL;
-	}
+	dev_kfree_skb(bcs->rx_skb);
+	bcs->rx_skb = NULL;
 
 	cs->ops->reinitbcshw(bcs);
 }
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 206c380..ceaef9a0 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -282,9 +282,7 @@
 /* dial */
 {EV_DIAL,	 -1,  -1, -1,			 -1, -1, {ACT_DIAL} },
 {RSP_INIT,	  0,   0, SEQ_DIAL,		601,  5, {ACT_CMD+AT_BC} },
-{RSP_OK,	601, 601, -1,			602,  5, {ACT_CMD+AT_HLC} },
-{RSP_NULL,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
-{RSP_OK,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	601, 601, -1,			603,  5, {ACT_CMD+AT_PROTO} },
 {RSP_OK,	603, 603, -1,			604,  5, {ACT_CMD+AT_TYPE} },
 {RSP_OK,	604, 604, -1,			605,  5, {ACT_CMD+AT_MSN} },
 {RSP_NULL,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 05947f9..8738b08 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -45,10 +45,6 @@
 #define MAX_EVENTS 64		/* size of event queue */
 
 #define RBUFSIZE 8192
-#define SBUFSIZE 4096		/* sk_buff payload size */
-
-#define TRANSBUFSIZE 768	/* bytes per skb for transparent receive */
-#define MAX_BUF_SIZE (SBUFSIZE - 2)	/* Max. size of a data packet from LL */
 
 /* compile time options */
 #define GIG_MAJOR 0
@@ -190,10 +186,9 @@
 #define AT_BC		3
 #define AT_PROTO	4
 #define AT_TYPE		5
-#define AT_HLC		6
-#define AT_CLIP		7
+#define AT_CLIP		6
 /* total number */
-#define AT_NUM		8
+#define AT_NUM		7
 
 /* variables in struct at_state_t */
 #define VAR_ZSAU	0
@@ -380,8 +375,10 @@
 
 	struct at_state_t at_state;
 
-	__u16 fcs;
-	struct sk_buff *skb;
+	/* receive buffer */
+	unsigned rx_bufsize;		/* max size accepted by application */
+	struct sk_buff *rx_skb;
+	__u16 rx_fcs;
 	int inputstate;			/* see INS_XXXX */
 
 	int channel;
@@ -406,7 +403,9 @@
 		struct bas_bc_state *bas;	/* usb hardware driver (base) */
 	} hw;
 
-	void *ap;			/* LL application structure */
+	void *ap;			/* associated LL application */
+	int apconnstate;		/* LL application connection state */
+	spinlock_t aplock;
 };
 
 struct cardstate {
@@ -801,8 +800,23 @@
 	gigaset_schedule_event(bcs->cs);
 }
 
-/* handling routines for sk_buff */
-/* ============================= */
+/* set up next receive skb for data mode */
+static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+	if (bcs->ignore) {
+		bcs->rx_skb = NULL;
+	} else {
+		bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
+		if (bcs->rx_skb == NULL)
+			dev_warn(cs->dev, "could not allocate skb\n");
+		else
+			skb_reserve(bcs->rx_skb, hw_hdr_len);
+	}
+	return bcs->rx_skb;
+}
 
 /* append received bytes to inbuf */
 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index c22e5ac..f01c3c2 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -16,7 +16,10 @@
 #include "gigaset.h"
 #include <linux/isdnif.h>
 
+#define SBUFSIZE	4096	/* sk_buff payload size */
+#define TRANSBUFSIZE	768	/* bytes per skb for transparent receive */
 #define HW_HDR_LEN	2	/* Header size used to store ack info */
+#define MAX_BUF_SIZE	(SBUFSIZE - HW_HDR_LEN)	/* max data packet from LL */
 
 /* == Handling of I4L IO =====================================================*/
 
@@ -231,6 +234,15 @@
 			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
 			return -EBUSY;
 		}
+		switch (bcs->proto2) {
+		case L2_HDLC:
+			bcs->rx_bufsize = SBUFSIZE;
+			break;
+		default:			/* assume transparent */
+			bcs->rx_bufsize = TRANSBUFSIZE;
+		}
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 
 		commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC);
 		if (!commands) {
@@ -314,6 +326,15 @@
 			return -EINVAL;
 		}
 		bcs = cs->bcs + ch;
+		switch (bcs->proto2) {
+		case L2_HDLC:
+			bcs->rx_bufsize = SBUFSIZE;
+			break;
+		default:			/* assume transparent */
+			bcs->rx_bufsize = TRANSBUFSIZE;
+		}
+		dev_kfree_skb(bcs->rx_skb);
+		gigaset_new_rx_skb(bcs);
 		if (!gigaset_add_event(cs, &bcs->at_state,
 				       EV_ACCEPT, NULL, 0, NULL))
 			return -ENOMEM;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 16fd3bd..2dfd346 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -500,19 +500,18 @@
  */
 static inline void hdlc_putbyte(unsigned char c, struct bc_state *bcs)
 {
-	bcs->fcs = crc_ccitt_byte(bcs->fcs, c);
-	if (unlikely(bcs->skb == NULL)) {
+	bcs->rx_fcs = crc_ccitt_byte(bcs->rx_fcs, c);
+	if (bcs->rx_skb == NULL)
 		/* skipping */
 		return;
-	}
-	if (unlikely(bcs->skb->len == SBUFSIZE)) {
+	if (bcs->rx_skb->len >= bcs->rx_bufsize) {
 		dev_warn(bcs->cs->dev, "received oversized packet discarded\n");
 		bcs->hw.bas->giants++;
-		dev_kfree_skb_any(bcs->skb);
-		bcs->skb = NULL;
+		dev_kfree_skb_any(bcs->rx_skb);
+		bcs->rx_skb = NULL;
 		return;
 	}
-	*__skb_put(bcs->skb, 1) = c;
+	*__skb_put(bcs->rx_skb, 1) = c;
 }
 
 /* hdlc_flush
@@ -521,18 +520,13 @@
 static inline void hdlc_flush(struct bc_state *bcs)
 {
 	/* clear skb or allocate new if not skipping */
-	if (likely(bcs->skb != NULL))
-		skb_trim(bcs->skb, 0);
-	else if (!bcs->ignore) {
-		bcs->skb = dev_alloc_skb(SBUFSIZE + bcs->cs->hw_hdr_len);
-		if (bcs->skb)
-			skb_reserve(bcs->skb, bcs->cs->hw_hdr_len);
-		else
-			dev_err(bcs->cs->dev, "could not allocate skb\n");
-	}
+	if (bcs->rx_skb != NULL)
+		skb_trim(bcs->rx_skb, 0);
+	else
+		gigaset_new_rx_skb(bcs);
 
 	/* reset packet state */
-	bcs->fcs = PPP_INITFCS;
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* hdlc_done
@@ -549,7 +543,7 @@
 		hdlc_flush(bcs);
 		return;
 	}
-	procskb = bcs->skb;
+	procskb = bcs->rx_skb;
 	if (procskb == NULL) {
 		/* previous error */
 		gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
@@ -560,8 +554,8 @@
 		bcs->hw.bas->runts++;
 		dev_kfree_skb_any(procskb);
 		gigaset_isdn_rcv_err(bcs);
-	} else if (bcs->fcs != PPP_GOODFCS) {
-		dev_notice(cs->dev, "frame check error (0x%04x)\n", bcs->fcs);
+	} else if (bcs->rx_fcs != PPP_GOODFCS) {
+		dev_notice(cs->dev, "frame check error\n");
 		bcs->hw.bas->fcserrs++;
 		dev_kfree_skb_any(procskb);
 		gigaset_isdn_rcv_err(bcs);
@@ -574,13 +568,8 @@
 		bcs->hw.bas->goodbytes += len;
 		gigaset_skb_rcvd(bcs, procskb);
 	}
-
-	bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-	if (bcs->skb)
-		skb_reserve(bcs->skb, cs->hw_hdr_len);
-	else
-		dev_err(cs->dev, "could not allocate skb\n");
-	bcs->fcs = PPP_INITFCS;
+	gigaset_new_rx_skb(bcs);
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* hdlc_frag
@@ -597,8 +586,8 @@
 	dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
 	bcs->hw.bas->alignerrs++;
 	gigaset_isdn_rcv_err(bcs);
-	__skb_trim(bcs->skb, 0);
-	bcs->fcs = PPP_INITFCS;
+	__skb_trim(bcs->rx_skb, 0);
+	bcs->rx_fcs = PPP_INITFCS;
 }
 
 /* bit counts lookup table for HDLC bit unstuffing
@@ -847,7 +836,6 @@
 static inline void trans_receive(unsigned char *src, unsigned count,
 				 struct bc_state *bcs)
 {
-	struct cardstate *cs = bcs->cs;
 	struct sk_buff *skb;
 	int dobytes;
 	unsigned char *dst;
@@ -857,17 +845,11 @@
 		hdlc_flush(bcs);
 		return;
 	}
-	skb = bcs->skb;
-	if (unlikely(skb == NULL)) {
-		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-		if (!skb) {
-			dev_err(cs->dev, "could not allocate skb\n");
-			return;
-		}
-		skb_reserve(skb, cs->hw_hdr_len);
-	}
+	skb = bcs->rx_skb;
+	if (skb == NULL)
+		skb = gigaset_new_rx_skb(bcs);
 	bcs->hw.bas->goodbytes += skb->len;
-	dobytes = TRANSBUFSIZE - skb->len;
+	dobytes = bcs->rx_bufsize - skb->len;
 	while (count > 0) {
 		dst = skb_put(skb, count < dobytes ? count : dobytes);
 		while (count > 0 && dobytes > 0) {
@@ -879,14 +861,10 @@
 			dump_bytes(DEBUG_STREAM_DUMP,
 				   "rcv data", skb->data, skb->len);
 			gigaset_skb_rcvd(bcs, skb);
-			bcs->skb = skb =
-				dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
-			if (!skb) {
-				dev_err(cs->dev, "could not allocate skb\n");
+			skb = gigaset_new_rx_skb(bcs);
+			if (skb == NULL)
 				return;
-			}
-			skb_reserve(skb, cs->hw_hdr_len);
-			dobytes = TRANSBUFSIZE;
+			dobytes = bcs->rx_bufsize;
 		}
 	}
 }
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index 72eb926..feec8d8 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -187,12 +187,13 @@
 hysdn_rx_netpkt(hysdn_card * card, unsigned char *buf, unsigned short len)
 {
 	struct net_local *lp = card->netif;
-	struct net_device *dev = lp->dev;
+	struct net_device *dev;
 	struct sk_buff *skb;
 
 	if (!lp)
 		return;		/* non existing device */
 
+	dev = lp->dev;
 	dev->stats.rx_bytes += len;
 
 	skb = dev_alloc_skb(len);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 81bf25e..e411262 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -302,6 +302,15 @@
 	  This option enable support for on-chip LED drivers found
 	  on Freescale Semiconductor MC13783 PMIC.
 
+config LEDS_NS2
+	tristate "LED support for Network Space v2 GPIO LEDs"
+	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
+	default y
+	help
+	  This option enable support for the dual-GPIO LED found on the
+	  Network Space v2 board (and parents). This include Internet Space v2,
+	  Network Space (Max) v2 and d2 Network v2 boards.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	help
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2493de4..7d6b958 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -37,6 +37,7 @@
 obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
 obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
+obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
new file mode 100644
index 0000000..74dce4b
--- /dev/null
+++ b/drivers/leds/leds-ns2.c
@@ -0,0 +1,338 @@
+/*
+ * leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
+ *
+ * Copyright (C) 2010 LaCie
+ *
+ * Author: Simon Guinot <sguinot@lacie.com>
+ *
+ * Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <mach/leds-ns2.h>
+
+/*
+ * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
+ * relation with the SATA activity. This capability is exposed through the
+ * "sata" sysfs attribute.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ *  cmd_led   |  slow_led  | /SATA active | LED state
+ *            |            |              |
+ *     1      |     0      |      x       |  off
+ *     -      |     1      |      x       |  on
+ *     0      |     0      |      1       |  on
+ *     0      |     0      |      0       |  blink (rate 300ms)
+ */
+
+enum ns2_led_modes {
+	NS_V2_LED_OFF,
+	NS_V2_LED_ON,
+	NS_V2_LED_SATA,
+};
+
+struct ns2_led_mode_value {
+	enum ns2_led_modes	mode;
+	int			cmd_level;
+	int			slow_level;
+};
+
+static struct ns2_led_mode_value ns2_led_modval[] = {
+	{ NS_V2_LED_OFF	, 1, 0 },
+	{ NS_V2_LED_ON	, 0, 1 },
+	{ NS_V2_LED_ON	, 1, 1 },
+	{ NS_V2_LED_SATA, 0, 0 },
+};
+
+struct ns2_led_data {
+	struct led_classdev	cdev;
+	unsigned		cmd;
+	unsigned		slow;
+	unsigned char		sata; /* True when SATA mode active. */
+	rwlock_t		rw_lock; /* Lock GPIOs. */
+};
+
+static int ns2_led_get_mode(struct ns2_led_data *led_dat,
+			    enum ns2_led_modes *mode)
+{
+	int i;
+	int ret = -EINVAL;
+	int cmd_level;
+	int slow_level;
+
+	read_lock(&led_dat->rw_lock);
+
+	cmd_level = gpio_get_value(led_dat->cmd);
+	slow_level = gpio_get_value(led_dat->slow);
+
+	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+		if (cmd_level == ns2_led_modval[i].cmd_level &&
+		    slow_level == ns2_led_modval[i].slow_level) {
+			*mode = ns2_led_modval[i].mode;
+			ret = 0;
+			break;
+		}
+	}
+
+	read_unlock(&led_dat->rw_lock);
+
+	return ret;
+}
+
+static void ns2_led_set_mode(struct ns2_led_data *led_dat,
+			     enum ns2_led_modes mode)
+{
+	int i;
+
+	write_lock(&led_dat->rw_lock);
+
+	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
+		if (mode == ns2_led_modval[i].mode) {
+			gpio_set_value(led_dat->cmd,
+				       ns2_led_modval[i].cmd_level);
+			gpio_set_value(led_dat->slow,
+				       ns2_led_modval[i].slow_level);
+		}
+	}
+
+	write_unlock(&led_dat->rw_lock);
+}
+
+static void ns2_led_set(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct ns2_led_data *led_dat =
+		container_of(led_cdev, struct ns2_led_data, cdev);
+	enum ns2_led_modes mode;
+
+	if (value == LED_OFF)
+		mode = NS_V2_LED_OFF;
+	else if (led_dat->sata)
+		mode = NS_V2_LED_SATA;
+	else
+		mode = NS_V2_LED_ON;
+
+	ns2_led_set_mode(led_dat, mode);
+}
+
+static ssize_t ns2_led_sata_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buff, size_t count)
+{
+	int ret;
+	unsigned long enable;
+	enum ns2_led_modes mode;
+	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+	ret = strict_strtoul(buff, 10, &enable);
+	if (ret < 0)
+		return ret;
+
+	enable = !!enable;
+
+	if (led_dat->sata == enable)
+		return count;
+
+	ret = ns2_led_get_mode(led_dat, &mode);
+	if (ret < 0)
+		return ret;
+
+	if (enable && mode == NS_V2_LED_ON)
+		ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
+	if (!enable && mode == NS_V2_LED_SATA)
+		ns2_led_set_mode(led_dat, NS_V2_LED_ON);
+
+	led_dat->sata = enable;
+
+	return count;
+}
+
+static ssize_t ns2_led_sata_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct ns2_led_data *led_dat = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", led_dat->sata);
+}
+
+static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
+
+static int __devinit
+create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
+	       const struct ns2_led *template)
+{
+	int ret;
+	enum ns2_led_modes mode;
+
+	ret = gpio_request(template->cmd, template->name);
+	if (ret == 0) {
+		ret = gpio_direction_output(template->cmd,
+					    gpio_get_value(template->cmd));
+		if (ret)
+			gpio_free(template->cmd);
+	}
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
+			template->name);
+	}
+
+	ret = gpio_request(template->slow, template->name);
+	if (ret == 0) {
+		ret = gpio_direction_output(template->slow,
+					    gpio_get_value(template->slow));
+		if (ret)
+			gpio_free(template->slow);
+	}
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
+			template->name);
+		goto err_free_cmd;
+	}
+
+	rwlock_init(&led_dat->rw_lock);
+
+	led_dat->cdev.name = template->name;
+	led_dat->cdev.default_trigger = template->default_trigger;
+	led_dat->cdev.blink_set = NULL;
+	led_dat->cdev.brightness_set = ns2_led_set;
+	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	led_dat->cmd = template->cmd;
+	led_dat->slow = template->slow;
+
+	ret = ns2_led_get_mode(led_dat, &mode);
+	if (ret < 0)
+		goto err_free_slow;
+
+	/* Set LED initial state. */
+	led_dat->sata = (mode == NS_V2_LED_SATA) ? 1 : 0;
+	led_dat->cdev.brightness =
+		(mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
+
+	ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+	if (ret < 0)
+		goto err_free_slow;
+
+	dev_set_drvdata(led_dat->cdev.dev, led_dat);
+	ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
+	if (ret < 0)
+		goto err_free_cdev;
+
+	return 0;
+
+err_free_cdev:
+	led_classdev_unregister(&led_dat->cdev);
+err_free_slow:
+	gpio_free(led_dat->slow);
+err_free_cmd:
+	gpio_free(led_dat->cmd);
+
+	return ret;
+}
+
+static void __devexit delete_ns2_led(struct ns2_led_data *led_dat)
+{
+	device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
+	led_classdev_unregister(&led_dat->cdev);
+	gpio_free(led_dat->cmd);
+	gpio_free(led_dat->slow);
+}
+
+static int __devinit ns2_led_probe(struct platform_device *pdev)
+{
+	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+	struct ns2_led_data *leds_data;
+	int i;
+	int ret;
+
+	if (!pdata)
+		return -EINVAL;
+
+	leds_data = kzalloc(sizeof(struct ns2_led_data) *
+			    pdata->num_leds, GFP_KERNEL);
+	if (!leds_data)
+		return -ENOMEM;
+
+	for (i = 0; i < pdata->num_leds; i++) {
+		ret = create_ns2_led(pdev, &leds_data[i], &pdata->leds[i]);
+		if (ret < 0)
+			goto err;
+
+	}
+
+	platform_set_drvdata(pdev, leds_data);
+
+	return 0;
+
+err:
+	for (i = i - 1; i >= 0; i--)
+		delete_ns2_led(&leds_data[i]);
+
+	kfree(leds_data);
+
+	return ret;
+}
+
+static int __devexit ns2_led_remove(struct platform_device *pdev)
+{
+	int i;
+	struct ns2_led_platform_data *pdata = pdev->dev.platform_data;
+	struct ns2_led_data *leds_data;
+
+	leds_data = platform_get_drvdata(pdev);
+
+	for (i = 0; i < pdata->num_leds; i++)
+		delete_ns2_led(&leds_data[i]);
+
+	kfree(leds_data);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver ns2_led_driver = {
+	.probe		= ns2_led_probe,
+	.remove		= __devexit_p(ns2_led_remove),
+	.driver		= {
+		.name	= "leds-ns2",
+		.owner	= THIS_MODULE,
+	},
+};
+MODULE_ALIAS("platform:leds-ns2");
+
+static int __init ns2_led_init(void)
+{
+	return platform_driver_register(&ns2_led_driver);
+}
+
+static void __exit ns2_led_exit(void)
+{
+	platform_driver_unregister(&ns2_led_driver);
+}
+
+module_init(ns2_led_init);
+module_exit(ns2_led_exit);
+
+MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
+MODULE_DESCRIPTION("Network Space v2 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 46b3a04..cb20d0b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2087,6 +2087,7 @@
 	/* First make sure individual recovery_offsets are correct */
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk >= 0 &&
+		    mddev->delta_disks >= 0 &&
 		    !test_bit(In_sync, &rdev->flags) &&
 		    mddev->curr_resync_completed > rdev->recovery_offset)
 				rdev->recovery_offset = mddev->curr_resync_completed;
@@ -3001,6 +3002,9 @@
 		return -EINVAL;
 	}
 
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		rdev->new_raid_disk = rdev->raid_disk;
+
 	/* ->takeover must set new_* and/or delta_disks
 	 * if it succeeds, and may set them when it fails.
 	 */
@@ -3051,13 +3055,35 @@
 		mddev->safemode = 0;
 	}
 
-	module_put(mddev->pers->owner);
-	/* Invalidate devices that are now superfluous */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
-		if (rdev->raid_disk >= mddev->raid_disks) {
-			rdev->raid_disk = -1;
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		char nm[20];
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk > mddev->raid_disks)
+			rdev->new_raid_disk = -1;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		sprintf(nm, "rd%d", rdev->raid_disk);
+		sysfs_remove_link(&mddev->kobj, nm);
+	}
+	list_for_each_entry(rdev, &mddev->disks, same_set) {
+		if (rdev->raid_disk < 0)
+			continue;
+		if (rdev->new_raid_disk == rdev->raid_disk)
+			continue;
+		rdev->raid_disk = rdev->new_raid_disk;
+		if (rdev->raid_disk < 0)
 			clear_bit(In_sync, &rdev->flags);
+		else {
+			char nm[20];
+			sprintf(nm, "rd%d", rdev->raid_disk);
+			if(sysfs_create_link(&mddev->kobj, &rdev->kobj, nm))
+				printk("md: cannot register %s for %s after level change\n",
+				       nm, mdname(mddev));
 		}
+	}
+
+	module_put(mddev->pers->owner);
 	mddev->pers = pers;
 	mddev->private = priv;
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -5895,6 +5921,7 @@
 	atomic_inc(&mddev->openers);
 	mutex_unlock(&mddev->open_mutex);
 
+	check_disk_size_change(mddev->gendisk, bdev);
  out:
 	return err;
 }
@@ -6846,6 +6873,7 @@
 			rcu_read_lock();
 			list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
 				if (rdev->raid_disk >= 0 &&
+				    mddev->delta_disks >= 0 &&
 				    !test_bit(Faulty, &rdev->flags) &&
 				    !test_bit(In_sync, &rdev->flags) &&
 				    rdev->recovery_offset < mddev->curr_resync)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 7ab5ea1..10597bf 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -78,6 +78,9 @@
 
 	int desc_nr;			/* descriptor index in the superblock */
 	int raid_disk;			/* role of device in array */
+	int new_raid_disk;		/* role that the device will have in
+					 * the array after a level-change completes.
+					 */
 	int saved_raid_disk;		/* role that device used to have in the
 					 * array and could again if we did a partial
 					 * resync from the bitmap
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index e70f004c..563abed 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -173,9 +173,11 @@
 	list_for_each_entry(rdev1, &mddev->disks, same_set) {
 		int j = rdev1->raid_disk;
 
-		if (mddev->level == 10)
+		if (mddev->level == 10) {
 			/* taking over a raid10-n2 array */
 			j /= 2;
+			rdev1->new_raid_disk = j;
+		}
 
 		if (j < 0 || j >= mddev->raid_disks) {
 			printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
@@ -361,12 +363,6 @@
 		mddev->private = conf;
 	}
 	conf = mddev->private;
-	if (conf->scale_raid_disks) {
-		int i;
-		for (i=0; i < conf->strip_zone[0].nb_dev; i++)
-			conf->devlist[i]->raid_disk /= conf->scale_raid_disks;
-		/* FIXME update sysfs rd links */
-	}
 
 	/* calculate array device size */
 	md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
@@ -573,7 +569,7 @@
 	return;
 }
 
-static void *raid0_takeover_raid5(mddev_t *mddev)
+static void *raid0_takeover_raid45(mddev_t *mddev)
 {
 	mdk_rdev_t *rdev;
 	raid0_conf_t *priv_conf;
@@ -596,6 +592,7 @@
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->raid_disks--;
 	mddev->delta_disks = -1;
@@ -635,6 +632,7 @@
 
 	/* Set new parameters */
 	mddev->new_level = 0;
+	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = - mddev->raid_disks / 2;
 	mddev->raid_disks += mddev->delta_disks;
@@ -643,19 +641,22 @@
 	mddev->recovery_cp = MaxSector;
 
 	create_strip_zones(mddev, &priv_conf);
-	priv_conf->scale_raid_disks = 2;
 	return priv_conf;
 }
 
 static void *raid0_takeover(mddev_t *mddev)
 {
 	/* raid0 can take over:
+	 *  raid4 - if all data disks are active.
 	 *  raid5 - providing it is Raid4 layout and one disk is faulty
 	 *  raid10 - assuming we have all necessary active disks
 	 */
+	if (mddev->level == 4)
+		return raid0_takeover_raid45(mddev);
+
 	if (mddev->level == 5) {
 		if (mddev->layout == ALGORITHM_PARITY_N)
-			return raid0_takeover_raid5(mddev);
+			return raid0_takeover_raid45(mddev);
 
 		printk(KERN_ERR "md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
 		       mdname(mddev), ALGORITHM_PARITY_N);
diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h
index d724e66..91f8e87 100644
--- a/drivers/md/raid0.h
+++ b/drivers/md/raid0.h
@@ -13,9 +13,6 @@
 	struct strip_zone *strip_zone;
 	mdk_rdev_t **devlist; /* lists of rdevs, pointed to by strip_zone->dev */
 	int nr_strip_zones;
-	int scale_raid_disks; /* divide rdev->raid_disks by this in run()
-			       * to handle conversion from raid10
-			       */
 };
 
 typedef struct raid0_private_data raid0_conf_t;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0372499..42e64e4 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1482,14 +1482,14 @@
 	int sectors = r10_bio->sectors;
 	mdk_rdev_t*rdev;
 	int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
+	int d = r10_bio->devs[r10_bio->read_slot].devnum;
 
 	rcu_read_lock();
-	{
-		int d = r10_bio->devs[r10_bio->read_slot].devnum;
+	rdev = rcu_dereference(conf->mirrors[d].rdev);
+	if (rdev) { /* If rdev is not NULL */
 		char b[BDEVNAME_SIZE];
 		int cur_read_error_count = 0;
 
-		rdev = rcu_dereference(conf->mirrors[d].rdev);
 		bdevname(rdev->bdev, b);
 
 		if (test_bit(Faulty, &rdev->flags)) {
@@ -1530,7 +1530,7 @@
 
 		rcu_read_lock();
 		do {
-			int d = r10_bio->devs[sl].devnum;
+			d = r10_bio->devs[sl].devnum;
 			rdev = rcu_dereference(conf->mirrors[d].rdev);
 			if (rdev &&
 			    test_bit(In_sync, &rdev->flags)) {
@@ -1564,7 +1564,7 @@
 		rcu_read_lock();
 		while (sl != r10_bio->read_slot) {
 			char b[BDEVNAME_SIZE];
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
@@ -1601,7 +1601,7 @@
 		}
 		sl = start;
 		while (sl != r10_bio->read_slot) {
-			int d;
+
 			if (sl==0)
 				sl = conf->copies;
 			sl--;
@@ -2161,22 +2161,22 @@
 	sector_t stride, size;
 	int err = -EINVAL;
 
-	if (mddev->chunk_sectors < (PAGE_SIZE >> 9) ||
-	    !is_power_of_2(mddev->chunk_sectors)) {
+	if (mddev->new_chunk_sectors < (PAGE_SIZE >> 9) ||
+	    !is_power_of_2(mddev->new_chunk_sectors)) {
 		printk(KERN_ERR "md/raid10:%s: chunk size must be "
 		       "at least PAGE_SIZE(%ld) and be a power of 2.\n",
 		       mdname(mddev), PAGE_SIZE);
 		goto out;
 	}
 
-	nc = mddev->layout & 255;
-	fc = (mddev->layout >> 8) & 255;
-	fo = mddev->layout & (1<<16);
+	nc = mddev->new_layout & 255;
+	fc = (mddev->new_layout >> 8) & 255;
+	fo = mddev->new_layout & (1<<16);
 
 	if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
-	    (mddev->layout >> 17)) {
+	    (mddev->new_layout >> 17)) {
 		printk(KERN_ERR "md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
-		       mdname(mddev), mddev->layout);
+		       mdname(mddev), mddev->new_layout);
 		goto out;
 	}
 
@@ -2241,7 +2241,6 @@
 	if (!conf->thread)
 		goto out;
 
-	conf->scale_disks = 0;
 	conf->mddev = mddev;
 	return conf;
 
@@ -2300,11 +2299,6 @@
 		if (disk_idx >= conf->raid_disks
 		    || disk_idx < 0)
 			continue;
-		if (conf->scale_disks) {
-			disk_idx *= conf->scale_disks;
-			rdev->raid_disk = disk_idx;
-			/* MOVE 'rd%d' link !! */
-		}
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
@@ -2435,26 +2429,22 @@
 		return ERR_PTR(-EINVAL);
 	}
 
-	/* Update slot numbers to obtain
-	 * degraded raid10 with missing mirrors
-	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set) {
-		rdev->raid_disk *= 2;
-	}
-
 	/* Set new parameters */
 	mddev->new_level = 10;
 	/* new layout: far_copies = 1, near_copies = 2 */
 	mddev->new_layout = (1<<8) + 2;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
 	mddev->delta_disks = mddev->raid_disks;
-	mddev->degraded = mddev->raid_disks;
 	mddev->raid_disks *= 2;
 	/* make sure it will be not marked as dirty */
 	mddev->recovery_cp = MaxSector;
 
 	conf = setup_conf(mddev);
-	conf->scale_disks = 2;
+	if (!IS_ERR(conf))
+		list_for_each_entry(rdev, &mddev->disks, same_set)
+			if (rdev->raid_disk >= 0)
+				rdev->new_raid_disk = rdev->raid_disk * 2;
+		
 	return conf;
 }
 
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 3824a08..2316ac2 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -38,11 +38,6 @@
 	int chunk_shift; /* shift from chunks to sectors */
 	sector_t chunk_mask;
 
-	int			scale_disks;  /* When starting array, multiply
-					       * each ->raid_disk by this.
-					       * Need for raid0->raid10 migration
-					       */
-
 	struct list_head	retry_list;
 	/* queue pending writes and submit them on unplug */
 	struct bio_list		pending_bio_list;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d2c0f94..96c6902 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -277,12 +277,13 @@
 	return sh;
 }
 
-static void shrink_buffers(struct stripe_head *sh, int num)
+static void shrink_buffers(struct stripe_head *sh)
 {
 	struct page *p;
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num ; i++) {
+	for (i = 0; i < num ; i++) {
 		p = sh->dev[i].page;
 		if (!p)
 			continue;
@@ -291,11 +292,12 @@
 	}
 }
 
-static int grow_buffers(struct stripe_head *sh, int num)
+static int grow_buffers(struct stripe_head *sh)
 {
 	int i;
+	int num = sh->raid_conf->pool_size;
 
-	for (i=0; i<num; i++) {
+	for (i = 0; i < num; i++) {
 		struct page *page;
 
 		if (!(page = alloc_page(GFP_KERNEL))) {
@@ -364,6 +366,73 @@
 	return NULL;
 }
 
+/*
+ * Need to check if array has failed when deciding whether to:
+ *  - start an array
+ *  - remove non-faulty devices
+ *  - add a spare
+ *  - allow a reshape
+ * This determination is simple when no reshape is happening.
+ * However if there is a reshape, we need to carefully check
+ * both the before and after sections.
+ * This is because some failed devices may only affect one
+ * of the two sections, and some non-in_sync devices may
+ * be insync in the section most affected by failed devices.
+ */
+static int has_failed(raid5_conf_t *conf)
+{
+	int degraded;
+	int i;
+	if (conf->mddev->reshape_position == MaxSector)
+		return conf->mddev->degraded > conf->max_degraded;
+
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->previous_raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If the reshape increases the number of devices,
+			 * this is being recovered by the reshape, so
+			 * this 'previous' section is not in_sync.
+			 * If the number of devices is being reduced however,
+			 * the device can only be part of the array if
+			 * we are reverting a reshape, so this section will
+			 * be in-sync.
+			 */
+			if (conf->raid_disks >= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	rcu_read_lock();
+	degraded = 0;
+	for (i = 0; i < conf->raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
+		if (!rdev || test_bit(Faulty, &rdev->flags))
+			degraded++;
+		else if (test_bit(In_sync, &rdev->flags))
+			;
+		else
+			/* not in-sync or faulty.
+			 * If reshape increases the number of devices, this
+			 * section has already been recovered, else it
+			 * almost certainly hasn't.
+			 */
+			if (conf->raid_disks <= conf->previous_raid_disks)
+				degraded++;
+	}
+	rcu_read_unlock();
+	if (degraded > conf->max_degraded)
+		return 1;
+	return 0;
+}
+
 static void unplug_slaves(mddev_t *mddev);
 static void raid5_unplug_device(struct request_queue *q);
 
@@ -1240,19 +1309,18 @@
 static int grow_one_stripe(raid5_conf_t *conf)
 {
 	struct stripe_head *sh;
-	int disks = max(conf->raid_disks, conf->previous_raid_disks);
 	sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
 	if (!sh)
 		return 0;
-	memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
+	memset(sh, 0, sizeof(*sh) + (conf->pool_size-1)*sizeof(struct r5dev));
 	sh->raid_conf = conf;
 	spin_lock_init(&sh->lock);
 	#ifdef CONFIG_MULTICORE_RAID456
 	init_waitqueue_head(&sh->ops.wait_for_ops);
 	#endif
 
-	if (grow_buffers(sh, disks)) {
-		shrink_buffers(sh, disks);
+	if (grow_buffers(sh)) {
+		shrink_buffers(sh);
 		kmem_cache_free(conf->slab_cache, sh);
 		return 0;
 	}
@@ -1468,7 +1536,7 @@
 	if (!sh)
 		return 0;
 	BUG_ON(atomic_read(&sh->count));
-	shrink_buffers(sh, conf->pool_size);
+	shrink_buffers(sh);
 	kmem_cache_free(conf->slab_cache, sh);
 	atomic_dec(&conf->active_stripes);
 	return 1;
@@ -2963,7 +3031,6 @@
 		mdk_rdev_t *rdev;
 
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx toread %p read %p write %p "
 			"written %p\n",	i, dev->flags, dev->toread, dev->read,
@@ -3000,17 +3067,27 @@
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* could be in-sync depending on recovery/reshape status */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			s.failed++;
 			s.failed_num = i;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
@@ -3244,7 +3321,6 @@
 	for (i=disks; i--; ) {
 		mdk_rdev_t *rdev;
 		dev = &sh->dev[i];
-		clear_bit(R5_Insync, &dev->flags);
 
 		pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
 			i, dev->flags, dev->toread, dev->towrite, dev->written);
@@ -3282,18 +3358,28 @@
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
+		clear_bit(R5_Insync, &dev->flags);
+		if (!rdev)
+			/* Not in-sync */;
+		else if (test_bit(In_sync, &rdev->flags))
+			set_bit(R5_Insync, &dev->flags);
+		else {
+			/* in sync if before recovery_offset */
+			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
+				set_bit(R5_Insync, &dev->flags);
+		}
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			/* The ReadError flag will just be confusing now */
 			clear_bit(R5_ReadError, &dev->flags);
 			clear_bit(R5_ReWrite, &dev->flags);
 		}
-		if (!rdev || !test_bit(In_sync, &rdev->flags)
-		    || test_bit(R5_ReadError, &dev->flags)) {
+		if (test_bit(R5_ReadError, &dev->flags))
+			clear_bit(R5_Insync, &dev->flags);
+		if (!test_bit(R5_Insync, &dev->flags)) {
 			if (s.failed < 2)
 				r6s.failed_num[s.failed] = i;
 			s.failed++;
-		} else
-			set_bit(R5_Insync, &dev->flags);
+		}
 	}
 	rcu_read_unlock();
 
@@ -4971,8 +5057,10 @@
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk < 0)
 			continue;
-		if (test_bit(In_sync, &rdev->flags))
+		if (test_bit(In_sync, &rdev->flags)) {
 			working_disks++;
+			continue;
+		}
 		/* This disc is not fully in-sync.  However if it
 		 * just stored parity (beyond the recovery_offset),
 		 * when we don't need to be concerned about the
@@ -5005,7 +5093,7 @@
 	mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
 			   - working_disks);
 
-	if (mddev->degraded > conf->max_degraded) {
+	if (has_failed(conf)) {
 		printk(KERN_ERR "md/raid:%s: not enough operational devices"
 			" (%d/%d failed)\n",
 			mdname(mddev), mddev->degraded, conf->raid_disks);
@@ -5207,6 +5295,7 @@
 	for (i = 0; i < conf->raid_disks; i++) {
 		tmp = conf->disks + i;
 		if (tmp->rdev
+		    && tmp->rdev->recovery_offset == MaxSector
 		    && !test_bit(Faulty, &tmp->rdev->flags)
 		    && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
 			unsigned long flags;
@@ -5242,7 +5331,7 @@
 		 * isn't possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
-		    mddev->degraded <= conf->max_degraded &&
+		    !has_failed(conf) &&
 		    number < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;
@@ -5270,7 +5359,7 @@
 	int first = 0;
 	int last = conf->raid_disks - 1;
 
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		/* no point adding a device */
 		return -EINVAL;
 
@@ -5362,7 +5451,7 @@
 	if (mddev->bitmap)
 		/* Cannot grow a bitmap yet */
 		return -EBUSY;
-	if (mddev->degraded > conf->max_degraded)
+	if (has_failed(conf))
 		return -EINVAL;
 	if (mddev->delta_disks < 0) {
 		/* We might be able to shrink, but the devices must
@@ -5437,8 +5526,13 @@
 
 	/* Add some new drives, as many as will fit.
 	 * We know there are enough to make the newly sized array work.
+	 * Don't add devices if we are reducing the number of
+	 * devices in the array.  This is because it is not possible
+	 * to correctly record the "partially reconstructed" state of
+	 * such devices during the reshape and confusion could result.
 	 */
-	list_for_each_entry(rdev, &mddev->disks, same_set)
+	if (mddev->delta_disks >= 0)
+	    list_for_each_entry(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk < 0 &&
 		    !test_bit(Faulty, &rdev->flags)) {
 			if (raid5_add_disk(mddev, rdev) == 0) {
@@ -5460,7 +5554,7 @@
 		}
 
 	/* When a reshape changes the number of devices, ->degraded
-	 * is measured against the large of the pre and post number of
+	 * is measured against the larger of the pre and post number of
 	 * devices.*/
 	if (mddev->delta_disks > 0) {
 		spin_lock_irqsave(&conf->device_lock, flags);
diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index 195c6cf..d22a8ec 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -13,6 +13,7 @@
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
@@ -22,6 +23,7 @@
 config IR_RC5_DECODER
 	tristate "Enable IR raw decoder for the RC-5 protocol"
 	depends on IR_CORE
+	select BITREVERSE
 	default y
 
 	---help---
diff --git a/drivers/media/IR/imon.c b/drivers/media/IR/imon.c
index 5e204567..4bbd45f 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/IR/imon.c
@@ -94,6 +94,7 @@
 
 	bool display_supported;		/* not all controllers do */
 	bool display_isopen;		/* display port has been opened */
+	bool rf_device;			/* true if iMON 2.4G LT/DT RF device */
 	bool rf_isassociating;		/* RF remote associating */
 	bool dev_present_intf0;		/* USB device presence, interface 0 */
 	bool dev_present_intf1;		/* USB device presence, interface 1 */
@@ -385,7 +386,7 @@
 		err("%s: display port is already open", __func__);
 		retval = -EBUSY;
 	} else {
-		ictx->display_isopen = 1;
+		ictx->display_isopen = true;
 		file->private_data = ictx;
 		dev_dbg(ictx->dev, "display port opened\n");
 	}
@@ -422,7 +423,7 @@
 		err("%s: display is not open", __func__);
 		retval = -EIO;
 	} else {
-		ictx->display_isopen = 0;
+		ictx->display_isopen = false;
 		dev_dbg(ictx->dev, "display port closed\n");
 		if (!ictx->dev_present_intf0) {
 			/*
@@ -491,12 +492,12 @@
 	}
 
 	init_completion(&ictx->tx.finished);
-	ictx->tx.busy = 1;
+	ictx->tx.busy = true;
 	smp_rmb(); /* ensure later readers know we're busy */
 
 	retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
 	if (retval) {
-		ictx->tx.busy = 0;
+		ictx->tx.busy = false;
 		smp_rmb(); /* ensure later readers know we're not busy */
 		err("%s: error submitting urb(%d)", __func__, retval);
 	} else {
@@ -682,7 +683,7 @@
 		return -ENODEV;
 
 	mutex_lock(&ictx->lock);
-	ictx->rf_isassociating = 1;
+	ictx->rf_isassociating = true;
 	send_associate_24g(ictx);
 	mutex_unlock(&ictx->lock);
 
@@ -950,7 +951,7 @@
 	ictx->tx.status = urb->status;
 
 	/* notify waiters that write has finished */
-	ictx->tx.busy = 0;
+	ictx->tx.busy = false;
 	smp_rmb(); /* ensure later readers know we're not busy */
 	complete(&ictx->tx.finished);
 }
@@ -1215,7 +1216,7 @@
 {
 	char rel_x = 0x00, rel_y = 0x00;
 	u8 right_shift = 1;
-	bool mouse_input = 1;
+	bool mouse_input = true;
 	int dir = 0;
 
 	/* newer iMON device PAD or mouse button */
@@ -1246,7 +1247,7 @@
 	} else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
 		dir = -1;
 	} else
-		mouse_input = 0;
+		mouse_input = false;
 
 	if (mouse_input) {
 		dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
@@ -1450,7 +1451,7 @@
 	unsigned char *buf = urb->transfer_buffer;
 	struct device *dev = ictx->dev;
 	u32 kc;
-	bool norelease = 0;
+	bool norelease = false;
 	int i;
 	u64 temp_key;
 	u64 panel_key = 0;
@@ -1465,7 +1466,7 @@
 	idev = ictx->idev;
 
 	/* filter out junk data on the older 0xffdc imon devices */
-	if ((buf[0] == 0xff) && (buf[7] == 0xff))
+	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
 		return;
 
 	/* Figure out what key was pressed */
@@ -1517,7 +1518,7 @@
 	     !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
 		len = 8;
 		imon_pad_to_keys(ictx, buf);
-		norelease = 1;
+		norelease = true;
 	}
 
 	if (debug) {
@@ -1580,7 +1581,7 @@
 	    (buf[6] == 0x5E && buf[7] == 0xDF))) {	/* DT */
 		dev_warn(dev, "%s: remote associated refid=%02X\n",
 			 __func__, buf[1]);
-		ictx->rf_isassociating = 0;
+		ictx->rf_isassociating = false;
 	}
 }
 
@@ -1790,9 +1791,9 @@
 	int ifnum = iface_desc->desc.bInterfaceNumber;
 	int num_endpts = iface_desc->desc.bNumEndpoints;
 	int i, ep_dir, ep_type;
-	bool ir_ep_found = 0;
-	bool display_ep_found = 0;
-	bool tx_control = 0;
+	bool ir_ep_found = false;
+	bool display_ep_found = false;
+	bool tx_control = false;
 
 	/*
 	 * Scan the endpoint list and set:
@@ -1808,13 +1809,13 @@
 		    ep_type == USB_ENDPOINT_XFER_INT) {
 
 			rx_endpoint = ep;
-			ir_ep_found = 1;
+			ir_ep_found = true;
 			dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
 
 		} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
 			   ep_type == USB_ENDPOINT_XFER_INT) {
 			tx_endpoint = ep;
-			display_ep_found = 1;
+			display_ep_found = true;
 			dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
 		}
 	}
@@ -1835,8 +1836,8 @@
 	 * newer iMON devices that use control urb instead of interrupt
 	 */
 	if (!display_ep_found) {
-		tx_control = 1;
-		display_ep_found = 1;
+		tx_control = true;
+		display_ep_found = true;
 		dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
 			"interface OUT endpoint\n", __func__);
 	}
@@ -1847,7 +1848,7 @@
 	 * and without... :\
 	 */
 	if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
-		display_ep_found = 0;
+		display_ep_found = false;
 		dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
 	}
 
@@ -1856,7 +1857,7 @@
 	 * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
 	 */
 	if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
-		display_ep_found = 0;
+		display_ep_found = false;
 		dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
 	}
 
@@ -1905,9 +1906,10 @@
 
 	ictx->dev = dev;
 	ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf0 = 1;
+	ictx->dev_present_intf0 = true;
 	ictx->rx_urb_intf0 = rx_urb;
 	ictx->tx_urb = tx_urb;
+	ictx->rf_device = false;
 
 	ictx->vendor  = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
 	ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
@@ -1979,7 +1981,7 @@
 	}
 
 	ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
-	ictx->dev_present_intf1 = 1;
+	ictx->dev_present_intf1 = true;
 	ictx->rx_urb_intf1 = rx_urb;
 
 	ret = -ENODEV;
@@ -2047,6 +2049,12 @@
 		dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
 		ictx->display_supported = false;
 		break;
+	/* iMON 2.4G LT (usb stick), no display, iMON RF */
+	case 0x4e:
+		dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
+		ictx->display_supported = false;
+		ictx->rf_device = true;
+		break;
 	/* iMON VFD, no IR (does have vol knob tho) */
 	case 0x35:
 		dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
@@ -2197,15 +2205,6 @@
 			goto fail;
 		}
 
-		if (product == 0xffdc) {
-			/* RF products *also* use 0xffdc... sigh... */
-			sysfs_err = sysfs_create_group(&interface->dev.kobj,
-						       &imon_rf_attribute_group);
-			if (sysfs_err)
-				err("%s: Could not create RF sysfs entries(%d)",
-				    __func__, sysfs_err);
-		}
-
 	} else {
 	/* this is the secondary interface on the device */
 		ictx = imon_init_intf1(interface, first_if_ctx);
@@ -2233,6 +2232,14 @@
 
 		imon_set_display_type(ictx, interface);
 
+		if (product == 0xffdc && ictx->rf_device) {
+			sysfs_err = sysfs_create_group(&interface->dev.kobj,
+						       &imon_rf_attribute_group);
+			if (sysfs_err)
+				err("%s: Could not create RF sysfs entries(%d)",
+				    __func__, sysfs_err);
+		}
+
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
 	}
@@ -2297,7 +2304,7 @@
 	}
 
 	if (ifnum == 0) {
-		ictx->dev_present_intf0 = 0;
+		ictx->dev_present_intf0 = false;
 		usb_kill_urb(ictx->rx_urb_intf0);
 		input_unregister_device(ictx->idev);
 		if (ictx->display_supported) {
@@ -2307,7 +2314,7 @@
 				usb_deregister_dev(interface, &imon_vfd_class);
 		}
 	} else {
-		ictx->dev_present_intf1 = 0;
+		ictx->dev_present_intf1 = false;
 		usb_kill_urb(ictx->rx_urb_intf1);
 		if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
 			input_unregister_device(ictx->touch);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 9374a00..94a8577 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -490,11 +490,12 @@
 	if (rc < 0)
 		goto out_table;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-		rc = ir_raw_event_register(input_dev);
-		if (rc < 0)
-			goto out_event;
-	}
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+			rc = ir_raw_event_register(input_dev);
+			if (rc < 0)
+				goto out_event;
+		}
 
 	IR_dprintk(1, "Registered input device on %s for %s remote.\n",
 		   driver_name, rc_tab->name);
@@ -530,8 +531,10 @@
 	IR_dprintk(1, "Freed keycode table\n");
 
 	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-		ir_raw_event_unregister(input_dev);
+	if (ir_dev->props)
+		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+			ir_raw_event_unregister(input_dev);
+
 	rc_tab = &ir_dev->rc_tab;
 	rc_tab->size = 0;
 	kfree(rc_tab->scan);
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index d7da63e..2098dd1 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -221,9 +221,10 @@
 	if (unlikely(devno < 0))
 		return devno;
 
-	if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		ir_dev->dev.type = &rc_dev_type;
-	else
+	if (ir_dev->props) {
+		if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+			ir_dev->dev.type = &rc_dev_type;
+	} else
 		ir_dev->dev.type = &ir_raw_dev_type;
 
 	ir_dev->dev.class = &ir_input_class;
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/IR/keymaps/Makefile
index ec25258..aea649f 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/IR/keymaps/Makefile
@@ -6,7 +6,8 @@
 			rc-avermedia.o \
 			rc-avermedia-cardbus.o \
 			rc-avermedia-dvbt.o \
-			rc-avermedia-m135a-rm-jx.o \
+			rc-avermedia-m135a.o \
+			rc-avermedia-m733a-rm-k6.o \
 			rc-avertv-303.o \
 			rc-behold.o \
 			rc-behold-columbus.o \
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c b/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
deleted file mode 100644
index 101e7ea..0000000
--- a/drivers/media/IR/keymaps/rc-avermedia-m135a-rm-jx.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* avermedia-m135a-rm-jx.h - Keytable for avermedia_m135a_rm_jx Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M135A with IR model RM-JX
- * The same codes exist on both Positivo (BR) and original IR
- * Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode avermedia_m135a_rm_jx[] = {
-	{ 0x0200, KEY_POWER2 },
-	{ 0x022e, KEY_DOT },		/* '.' */
-	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
-
-	{ 0x0205, KEY_1 },
-	{ 0x0206, KEY_2 },
-	{ 0x0207, KEY_3 },
-	{ 0x0209, KEY_4 },
-	{ 0x020a, KEY_5 },
-	{ 0x020b, KEY_6 },
-	{ 0x020d, KEY_7 },
-	{ 0x020e, KEY_8 },
-	{ 0x020f, KEY_9 },
-	{ 0x0211, KEY_0 },
-
-	{ 0x0213, KEY_RIGHT },		/* -> or L */
-	{ 0x0212, KEY_LEFT },		/* <- or R */
-
-	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
-	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
-
-	{ 0x0303, KEY_CHANNELUP },
-	{ 0x0302, KEY_CHANNELDOWN },
-	{ 0x021f, KEY_VOLUMEUP },
-	{ 0x021e, KEY_VOLUMEDOWN },
-	{ 0x020c, KEY_ENTER },		/* Full Screen */
-
-	{ 0x0214, KEY_MUTE },
-	{ 0x0208, KEY_AUDIO },
-
-	{ 0x0203, KEY_TEXT },		/* Teletext */
-	{ 0x0204, KEY_EPG },
-	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
-
-	{ 0x021d, KEY_RED },
-	{ 0x021c, KEY_YELLOW },
-	{ 0x0301, KEY_GREEN },
-	{ 0x0300, KEY_BLUE },
-
-	{ 0x021a, KEY_PLAYPAUSE },
-	{ 0x0219, KEY_RECORD },
-	{ 0x0218, KEY_PLAY },
-	{ 0x021b, KEY_STOP },
-};
-
-static struct rc_keymap avermedia_m135a_rm_jx_map = {
-	.map = {
-		.scan    = avermedia_m135a_rm_jx,
-		.size    = ARRAY_SIZE(avermedia_m135a_rm_jx),
-		.ir_type = IR_TYPE_NEC,
-		.name    = RC_MAP_AVERMEDIA_M135A_RM_JX,
-	}
-};
-
-static int __init init_rc_map_avermedia_m135a_rm_jx(void)
-{
-	return ir_register_map(&avermedia_m135a_rm_jx_map);
-}
-
-static void __exit exit_rc_map_avermedia_m135a_rm_jx(void)
-{
-	ir_unregister_map(&avermedia_m135a_rm_jx_map);
-}
-
-module_init(init_rc_map_avermedia_m135a_rm_jx)
-module_exit(exit_rc_map_avermedia_m135a_rm_jx)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a.c b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
new file mode 100644
index 0000000..e4471fb
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m135a.c
@@ -0,0 +1,147 @@
+/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M135A with RM-JX and RM-K6 remote controls
+ *
+ * On Avermedia M135A with IR model RM-JX, the same codes exist on both
+ * Positivo (BR) and original IR, initial version and remote control codes
+ * added by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Positivo also ships Avermedia M135A with model RM-K6, extra control
+ * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m135a[] = {
+	/* RM-JX */
+	{ 0x0200, KEY_POWER2 },
+	{ 0x022e, KEY_DOT },		/* '.' */
+	{ 0x0201, KEY_MODE },		/* TV/FM or SOURCE */
+
+	{ 0x0205, KEY_1 },
+	{ 0x0206, KEY_2 },
+	{ 0x0207, KEY_3 },
+	{ 0x0209, KEY_4 },
+	{ 0x020a, KEY_5 },
+	{ 0x020b, KEY_6 },
+	{ 0x020d, KEY_7 },
+	{ 0x020e, KEY_8 },
+	{ 0x020f, KEY_9 },
+	{ 0x0211, KEY_0 },
+
+	{ 0x0213, KEY_RIGHT },		/* -> or L */
+	{ 0x0212, KEY_LEFT },		/* <- or R */
+
+	{ 0x0217, KEY_SLEEP },		/* Capturar Imagem or Snapshot */
+	{ 0x0210, KEY_SHUFFLE },	/* Amostra or 16 chan prev */
+
+	{ 0x0303, KEY_CHANNELUP },
+	{ 0x0302, KEY_CHANNELDOWN },
+	{ 0x021f, KEY_VOLUMEUP },
+	{ 0x021e, KEY_VOLUMEDOWN },
+	{ 0x020c, KEY_ENTER },		/* Full Screen */
+
+	{ 0x0214, KEY_MUTE },
+	{ 0x0208, KEY_AUDIO },
+
+	{ 0x0203, KEY_TEXT },		/* Teletext */
+	{ 0x0204, KEY_EPG },
+	{ 0x022b, KEY_TV2 },		/* TV2 or PIP */
+
+	{ 0x021d, KEY_RED },
+	{ 0x021c, KEY_YELLOW },
+	{ 0x0301, KEY_GREEN },
+	{ 0x0300, KEY_BLUE },
+
+	{ 0x021a, KEY_PLAYPAUSE },
+	{ 0x0219, KEY_RECORD },
+	{ 0x0218, KEY_PLAY },
+	{ 0x021b, KEY_STOP },
+
+	/* RM-K6 */
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m135a_map = {
+	.map = {
+		.scan    = avermedia_m135a,
+		.size    = ARRAY_SIZE(avermedia_m135a),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M135A,
+	}
+};
+
+static int __init init_rc_map_avermedia_m135a(void)
+{
+	return ir_register_map(&avermedia_m135a_map);
+}
+
+static void __exit exit_rc_map_avermedia_m135a(void)
+{
+	ir_unregister_map(&avermedia_m135a_map);
+}
+
+module_init(init_rc_map_avermedia_m135a)
+module_exit(exit_rc_map_avermedia_m135a)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
new file mode 100644
index 0000000..cf8d457
--- /dev/null
+++ b/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -0,0 +1,95 @@
+/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
+ *
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M733A with IR model RM-K6
+ * This is the stock remote controller used with Positivo machines with M733A
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m733a_rm_k6[] = {
+	{ 0x0401, KEY_POWER2 },
+	{ 0x0406, KEY_MUTE },
+	{ 0x0408, KEY_MODE },     /* TV/FM */
+
+	{ 0x0409, KEY_1 },
+	{ 0x040a, KEY_2 },
+	{ 0x040b, KEY_3 },
+	{ 0x040c, KEY_4 },
+	{ 0x040d, KEY_5 },
+	{ 0x040e, KEY_6 },
+	{ 0x040f, KEY_7 },
+	{ 0x0410, KEY_8 },
+	{ 0x0411, KEY_9 },
+	{ 0x044c, KEY_DOT },      /* '.' */
+	{ 0x0412, KEY_0 },
+	{ 0x0407, KEY_REFRESH },  /* Refresh/Reload */
+
+	{ 0x0413, KEY_AUDIO },
+	{ 0x0440, KEY_SCREEN },   /* Full Screen toggle */
+	{ 0x0441, KEY_HOME },
+	{ 0x0442, KEY_BACK },
+	{ 0x0447, KEY_UP },
+	{ 0x0448, KEY_DOWN },
+	{ 0x0449, KEY_LEFT },
+	{ 0x044a, KEY_RIGHT },
+	{ 0x044b, KEY_OK },
+	{ 0x0404, KEY_VOLUMEUP },
+	{ 0x0405, KEY_VOLUMEDOWN },
+	{ 0x0402, KEY_CHANNELUP },
+	{ 0x0403, KEY_CHANNELDOWN },
+
+	{ 0x0443, KEY_RED },
+	{ 0x0444, KEY_GREEN },
+	{ 0x0445, KEY_YELLOW },
+	{ 0x0446, KEY_BLUE },
+
+	{ 0x0414, KEY_TEXT },
+	{ 0x0415, KEY_EPG },
+	{ 0x041a, KEY_TV2 },      /* PIP */
+	{ 0x041b, KEY_MHP },      /* Snapshot */
+
+	{ 0x0417, KEY_RECORD },
+	{ 0x0416, KEY_PLAYPAUSE },
+	{ 0x0418, KEY_STOP },
+	{ 0x0419, KEY_PAUSE },
+
+	{ 0x041f, KEY_PREVIOUS },
+	{ 0x041c, KEY_REWIND },
+	{ 0x041d, KEY_FORWARD },
+	{ 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m733a_rm_k6_map = {
+	.map = {
+		.scan    = avermedia_m733a_rm_k6,
+		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
+		.ir_type = IR_TYPE_NEC,
+		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
+	}
+};
+
+static int __init init_rc_map_avermedia_m733a_rm_k6(void)
+{
+	return ir_register_map(&avermedia_m733a_rm_k6_map);
+}
+
+static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
+{
+	ir_unregister_map(&avermedia_m733a_rm_k6_map);
+}
+
+module_init(init_rc_map_avermedia_m733a_rm_k6)
+module_exit(exit_rc_map_avermedia_m733a_rm_k6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 8abbcc5..8cf2ab6 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -524,6 +524,7 @@
 		buffer[3] = 0x39;
 		break;
 	case TUNER_PHILIPS_FQ1216LME_MK3:
+	case TUNER_PHILIPS_FQ1236_MK5:
 		tuner_err("This tuner doesn't have FM\n");
 		/* Set the low band for sanity, since it covers 88-108 MHz */
 		buffer[3] = 0x01;
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index d9aaaca..58a513b 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1353,6 +1353,17 @@
 	},
 };
 
+/* ------------ TUNER_PHILIPS_FQ1236_MK5 - Philips NTSC ------------ */
+
+static struct tuner_params tuner_philips_fq1236_mk5_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_NTSC,
+		.ranges = tuner_fm1236_mk3_ntsc_ranges,
+		.count  = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
+		.has_tda9887 = 1, /* TDA9885, no FM radio */
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1826,6 +1837,11 @@
 		.params = tuner_sony_btf_pxn01z_params,
 		.count  = ARRAY_SIZE(tuner_sony_btf_pxn01z_params),
 	},
+	[TUNER_PHILIPS_FQ1236_MK5] = { /* NTSC, TDA9885, no FM radio */
+		.name   = "Philips FQ1236 MK5",
+		.params = tuner_philips_fq1236_mk5_params,
+		.count  = ARRAY_SIZE(tuner_philips_fq1236_mk5_params),
+	},
 };
 EXPORT_SYMBOL(tuners);
 
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index b762e56..bca07c0 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -594,7 +594,7 @@
 int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
 {
 	struct input_dev *input_dev;
-	char *ir_codes = NULL;
+	char *ir_codes = RC_MAP_DM1105_NEC;
 	int err = -ENOMEM;
 
 	input_dev = input_allocate_device();
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index f6dac2b..6c3a8a0 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -351,6 +351,7 @@
 	const u8 *ts, *ts_end, *from_where = NULL;
 	u8 ts_remain = 0, how_much = 0, new_ts = 1;
 	struct ethhdr *ethh = NULL;
+	bool error = false;
 
 #ifdef ULE_DEBUG
 	/* The code inside ULE_DEBUG keeps a history of the last 100 TS cells processed. */
@@ -460,10 +461,16 @@
 
 						/* Drop partly decoded SNDU, reset state, resync on PUSI. */
 						if (priv->ule_skb) {
-							dev_kfree_skb( priv->ule_skb );
+							error = true;
+							dev_kfree_skb(priv->ule_skb);
+						}
+
+						if (error || priv->ule_sndu_remain) {
 							dev->stats.rx_errors++;
 							dev->stats.rx_frame_errors++;
+							error = false;
 						}
+
 						reset_ule(priv);
 						priv->need_pusi = 1;
 						continue;
@@ -535,6 +542,7 @@
 				from_where += 2;
 			}
 
+			priv->ule_sndu_remain = priv->ule_sndu_len + 2;
 			/*
 			 * State of current TS:
 			 *   ts_remain (remaining bytes in the current TS cell)
@@ -544,6 +552,7 @@
 			 */
 			switch (ts_remain) {
 				case 1:
+					priv->ule_sndu_remain--;
 					priv->ule_sndu_type = from_where[0] << 8;
 					priv->ule_sndu_type_1 = 1; /* first byte of ule_type is set. */
 					ts_remain -= 1; from_where += 1;
@@ -557,6 +566,7 @@
 				default: /* complete ULE header is present in current TS. */
 					/* Extract ULE type field. */
 					if (priv->ule_sndu_type_1) {
+						priv->ule_sndu_type_1 = 0;
 						priv->ule_sndu_type |= from_where[0];
 						from_where += 1; /* points to payload start. */
 						ts_remain -= 1;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e5f91f1..553b48a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -76,6 +76,7 @@
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
@@ -134,6 +135,7 @@
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -264,7 +266,7 @@
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_MT312 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 0eb4908..11e9e85 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -1026,8 +1026,10 @@
 	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
 
 	if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
-				 &cxusb_dualdig4_rev2_config) < 0)
+				     &cxusb_dualdig4_rev2_config) < 0) {
+		printk(KERN_WARNING "Unable to enumerate dib7000p\n");
 		return -ENODEV;
+	}
 
 	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
 			      &cxusb_dualdig4_rev2_config);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 085c4e4..b4afe6f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -198,6 +198,7 @@
 #define USB_PID_AVERMEDIA_A850				0x850a
 #define USB_PID_AVERMEDIA_A805				0xa805
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
+#define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index 20ca9d9..a6de489 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -29,6 +29,8 @@
 
 #include "tda826x.h"
 #include "tda10086.h"
+#include "tda1002x.h"
+#include "tda827x.h"
 #include "lnbp21.h"
 
 /* debug */
@@ -150,7 +152,17 @@
 	.xtal_freq = TDA10086_XTAL_16M,
 };
 
-static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xa511,
+};
+
+static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
 {
 	if (usb_set_interface(adap->dev->udev,0,3) < 0)
 		err("set interface to alts=3 failed");
@@ -163,7 +175,27 @@
 	return 0;
 }
 
-static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
+		err("set interface to alts=3 failed");
+	if ((adap->fe = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
+		deb_info("TDA10023 attach failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
+{
+	if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
+		printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap)
 {
 	if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
 		deb_info("TDA8263 attach failed\n");
@@ -180,6 +212,7 @@
 /* DVB USB Driver stuff */
 static struct dvb_usb_device_properties ttusb2_properties;
 static struct dvb_usb_device_properties ttusb2_properties_s2400;
+static struct dvb_usb_device_properties ttusb2_properties_ct3650;
 
 static int ttusb2_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
@@ -187,6 +220,8 @@
 	if (0 == dvb_usb_device_init(intf, &ttusb2_properties,
 				     THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650,
 				     THIS_MODULE, NULL, adapter_nr))
 		return 0;
 	return -ENODEV;
@@ -197,6 +232,8 @@
 	{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
 	{ USB_DEVICE(USB_VID_TECHNOTREND,
 		USB_PID_TECHNOTREND_CONNECT_S2400) },
+	{ USB_DEVICE(USB_VID_TECHNOTREND,
+		USB_PID_TECHNOTREND_CONNECT_CT3650) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, ttusb2_table);
@@ -214,8 +251,8 @@
 		{
 			.streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
 
-			.frontend_attach  = ttusb2_frontend_attach,
-			.tuner_attach     = ttusb2_tuner_attach,
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
 
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
@@ -266,8 +303,8 @@
 		{
 			.streaming_ctrl   = NULL,
 
-			.frontend_attach  = ttusb2_frontend_attach,
-			.tuner_attach     = ttusb2_tuner_attach,
+			.frontend_attach  = ttusb2_frontend_tda10086_attach,
+			.tuner_attach     = ttusb2_tuner_tda826x_attach,
 
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
@@ -301,6 +338,52 @@
 	}
 };
 
+static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = NULL,
+
+			.frontend_attach  = ttusb2_frontend_tda10023_attach,
+			.tuner_attach = ttusb2_tuner_tda827x_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		},
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "Technotrend TT-connect CT-3650",
+			.warm_ids = { &ttusb2_table[3], NULL },
+		},
+	}
+};
+
 static struct usb_driver ttusb2_driver = {
 	.name		= "dvb_usb_ttusb2",
 	.probe		= ttusb2_probe,
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 26333b4..b34ca7a 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -58,7 +58,7 @@
 	num = hpsb_iso_n_ready(iso);
 
 	if (!fdtv) {
-		dev_err(fdtv->device, "received at unknown iso channel\n");
+		pr_err("received at unknown iso channel\n");
 		goto out;
 	}
 
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 68dba3a..29cdbfe 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -567,30 +567,6 @@
 
 /* ----------------------------------------------------------------------- */
 
-static int au8522_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int au8522_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		/* Not yet implemented */
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int au8522_g_register(struct v4l2_subdev *sd,
 			     struct v4l2_dbg_register *reg)
@@ -772,8 +748,6 @@
 
 static const struct v4l2_subdev_video_ops au8522_video_ops = {
 	.s_routing = au8522_s_video_routing,
-	.g_fmt = au8522_g_fmt,
-	.s_fmt = au8522_s_fmt,
 	.s_stream = au8522_s_stream,
 };
 
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
index 78001e8..fc61d92 100644
--- a/drivers/media/dvb/frontends/ds3000.c
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -969,15 +969,12 @@
 	dprintk("%s\n", __func__);
 
 	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct ds3000_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct ds3000_state), GFP_KERNEL);
 	if (state == NULL) {
 		printk(KERN_ERR "Unable to kmalloc\n");
 		goto error2;
 	}
 
-	/* setup the state */
-	memset(state, 0, sizeof(struct ds3000_state));
-
 	state->config = config;
 	state->i2c = i2c;
 	state->prevUCBS2 = 0;
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
index 42591ce..f36cab1 100644
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -303,7 +303,10 @@
 
 static int stv6110x_sleep(struct dvb_frontend *fe)
 {
-	return stv6110x_set_mode(fe, TUNER_SLEEP);
+	if (fe->tuner_priv)
+		return stv6110x_set_mode(fe, TUNER_SLEEP);
+
+	return 0;
 }
 
 static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status)
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
index 692c3e2..4692a41 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -217,6 +217,19 @@
 	.fw_version	= 15,
 };
 
+static struct ngene_info ngene_info_duoFlexS2 = {
+	.type           = NGENE_SIDEWINDER,
+	.name           = "Digital Devices DuoFlex S2 miniPCIe",
+	.io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN},
+	.demod_attach   = {demod_attach_stv0900, demod_attach_stv0900},
+	.tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110},
+	.fe_config      = {&fe_cineS2, &fe_cineS2},
+	.tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1},
+	.lnb            = {0x0a, 0x08},
+	.tsf            = {3, 3},
+	.fw_version     = 15,
+};
+
 static struct ngene_info ngene_info_m780 = {
 	.type           = NGENE_APP,
 	.name           = "Aver M780 ATSC/QAM-B",
@@ -256,6 +269,8 @@
 	NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
 	NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
 	NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
+	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2),
+	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2),
 	NGENE_ID(0x1461, 0x062e, ngene_info_m780),
 	{0}
 };
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index c8b4dfa..4caeb16 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -53,8 +53,6 @@
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-#define COMMAND_TIMEOUT_WORKAROUND
-
 #define dprintk	if (debug) printk
 
 #define ngwriteb(dat, adr)         writeb((dat), (char *)(dev->iomem + (adr)))
@@ -147,24 +145,24 @@
 		} else {
 			if (chan->HWState == HWSTATE_RUN) {
 				u32 Flags = 0;
+				IBufferExchange *exch1 = chan->pBufferExchange;
+				IBufferExchange *exch2 = chan->pBufferExchange2;
 				if (Cur->ngeneBuffer.SR.Flags & 0x01)
 					Flags |= BEF_EVEN_FIELD;
 				if (Cur->ngeneBuffer.SR.Flags & 0x20)
 					Flags |= BEF_OVERFLOW;
-				if (chan->pBufferExchange)
-					chan->pBufferExchange(chan,
-							      Cur->Buffer1,
-							      chan->
-							      Capture1Length,
-							      Cur->ngeneBuffer.
-							      SR.Clock, Flags);
-				if (chan->pBufferExchange2)
-					chan->pBufferExchange2(chan,
-							       Cur->Buffer2,
-							       chan->
-							       Capture2Length,
-							       Cur->ngeneBuffer.
-							       SR.Clock, Flags);
+				spin_unlock_irq(&chan->state_lock);
+				if (exch1)
+					exch1(chan, Cur->Buffer1,
+						chan->Capture1Length,
+						Cur->ngeneBuffer.SR.Clock,
+						Flags);
+				if (exch2)
+					exch2(chan, Cur->Buffer2,
+						chan->Capture2Length,
+						Cur->ngeneBuffer.SR.Clock,
+						Flags);
+				spin_lock_irq(&chan->state_lock);
 			} else if (chan->HWState != HWSTATE_STOP)
 				chan->HWState = HWSTATE_RUN;
 		}
@@ -572,11 +570,7 @@
 	u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
 	u16 BsSDO = 0x9B00;
 
-	/* down(&dev->stream_mutex); */
-	while (down_trylock(&dev->stream_mutex)) {
-		printk(KERN_INFO DEVICE_NAME ": SC locked\n");
-		msleep(1);
-	}
+	down(&dev->stream_mutex);
 	memset(&com, 0, sizeof(com));
 	com.cmd.hdr.Opcode = CMD_CONTROL;
 	com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
@@ -1252,14 +1246,17 @@
 		version = 15;
 		size = 23466;
 		fw_name = "ngene_15.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	case 16:
 		size = 23498;
 		fw_name = "ngene_16.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	case 17:
 		size = 24446;
 		fw_name = "ngene_17.fw";
+		dev->cmd_timeout_workaround = true;
 		break;
 	}
 
@@ -1299,11 +1296,16 @@
 	ngwritel(0, NGENE_EVENT);
 	ngwritel(0, NGENE_EVENT_HI);
 	free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+	if (dev->msi_enabled)
+		pci_disable_msi(dev->pci_dev);
+#endif
 }
 
 static int ngene_start(struct ngene *dev)
 {
 	int stat;
+	unsigned long flags;
 	int i;
 
 	pci_set_master(dev->pci_dev);
@@ -1333,6 +1335,28 @@
 	if (stat < 0)
 		goto fail;
 
+#ifdef CONFIG_PCI_MSI
+	/* enable MSI if kernel and card support it */
+	if (pci_msi_enabled() && dev->card_info->msi_supported) {
+		ngwritel(0, NGENE_INT_ENABLE);
+		free_irq(dev->pci_dev->irq, dev);
+		stat = pci_enable_msi(dev->pci_dev);
+		if (stat) {
+			printk(KERN_INFO DEVICE_NAME
+				": MSI not available\n");
+			flags = IRQF_SHARED;
+		} else {
+			flags = 0;
+			dev->msi_enabled = true;
+		}
+		stat = request_irq(dev->pci_dev->irq, irq_handler,
+					flags, "nGene", dev);
+		if (stat < 0)
+			goto fail2;
+		ngwritel(1, NGENE_INT_ENABLE);
+	}
+#endif
+
 	stat = ngene_i2c_init(dev, 0);
 	if (stat < 0)
 		goto fail;
@@ -1358,10 +1382,18 @@
 			bconf = BUFFER_CONFIG_3333;
 		stat = ngene_command_config_buf(dev, bconf);
 	}
-	return stat;
+	if (!stat)
+		return stat;
+
+	/* otherwise error: fall through */
 fail:
 	ngwritel(0, NGENE_INT_ENABLE);
 	free_irq(dev->pci_dev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+fail2:
+	if (dev->msi_enabled)
+		pci_disable_msi(dev->pci_dev);
+#endif
 	return stat;
 }
 
@@ -1379,10 +1411,8 @@
 	struct ngene_info *ni = dev->card_info;
 	int io = ni->io_type[chan->number];
 
-#ifdef COMMAND_TIMEOUT_WORKAROUND
-	if (chan->running)
+	if (chan->dev->cmd_timeout_workaround && chan->running)
 		set_transfer(chan, 0);
-#endif
 
 	tasklet_kill(&chan->demux_tasklet);
 
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 96013eb..48f980b 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -37,15 +37,12 @@
 #include <linux/pci.h>
 #include <linux/smp_lock.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
 
 #include "ngene.h"
 
-#define COMMAND_TIMEOUT_WORKAROUND
-
 
 /****************************************************************************/
 /* COMMAND API interface ****************************************************/
@@ -69,9 +66,7 @@
 	struct ngene_channel *chan = priv;
 
 
-#ifdef COMMAND_TIMEOUT_WORKAROUND
 	if (chan->users > 0)
-#endif
 		dvb_dmx_swfilter(&chan->demux, buf, len);
 	return NULL;
 }
@@ -106,11 +101,8 @@
 	struct ngene_channel *chan = dvbdmx->priv;
 
 	if (chan->users == 0) {
-#ifdef COMMAND_TIMEOUT_WORKAROUND
-		if (!chan->running)
-#endif
+		if (!chan->dev->cmd_timeout_workaround || !chan->running)
 			set_transfer(chan, 1);
-		/* msleep(10); */
 	}
 
 	return ++chan->users;
@@ -124,9 +116,8 @@
 	if (--chan->users)
 		return chan->users;
 
-#ifndef COMMAND_TIMEOUT_WORKAROUND
-	set_transfer(chan, 0);
-#endif
+	if (!chan->dev->cmd_timeout_workaround)
+		set_transfer(chan, 0);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
index 2ef54ca6..477fe0a 100644
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ b/drivers/media/dvb/ngene/ngene-i2c.c
@@ -39,7 +39,6 @@
 #include <linux/pci_ids.h>
 #include <linux/smp_lock.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
index 676fcbb..8fb4200 100644
--- a/drivers/media/dvb/ngene/ngene.h
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -725,6 +725,8 @@
 	u32                   device_version;
 	u32                   fw_interface_version;
 	u32                   icounts;
+	bool                  msi_enabled;
+	bool                  cmd_timeout_workaround;
 
 	u8                   *CmdDoneByte;
 	int                   BootFirmware;
@@ -797,6 +799,7 @@
 #define NGENE_VBOX_V2	 7
 
 	int   fw_version;
+	bool  msi_supported;
 	char *name;
 
 	int   io_type[MAX_STREAM];
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index d8d4214..32a7ec6 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -68,13 +68,14 @@
 	select DVB_VES1820 if !DVB_FE_CUSTOMISE
 	select DVB_L64781 if !DVB_FE_CUSTOMISE
 	select DVB_TDA8083 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
-	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+	select DVB_ISL6423 if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if !DVB_FE_CUSTOMISE
+	select DVB_STV6110x if !DVB_FE_CUSTOMISE
 	help
 	  Support for simple SAA7146 based DVB cards (so called Budget-
 	  or Nova-PCI cards) without onboard MPEG2 decoder, and without
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 4617143..13ac9e3a 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -215,6 +215,7 @@
 		break;
 	case 0x1010:
 	case 0x1017:
+	case 0x1019:
 	case 0x101a:
 		/* for the Technotrend 1500 bundled remote */
 		ir_codes = RC_MAP_TT_1500;
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ad9e6f9..27e2acc 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -646,7 +646,7 @@
 
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
-	depends on PARPORT && VIDEO_V4L1
+	depends on PARPORT && VIDEO_V4L2
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
@@ -656,7 +656,7 @@
 
 config VIDEO_CQCAM
 	tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
+	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
 	help
 	  This is the video4linux driver for the colour version of the
 	  Connectix QuickCam.  If you have one of these cameras, say Y here,
@@ -969,6 +969,19 @@
 	---help---
 	  This is a v4l2 driver for the TI OMAP2 camera capture interface
 
+config VIDEO_MX2_HOSTSUPPORT
+        bool
+
+config VIDEO_MX2
+	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_MX2_HOSTSUPPORT
+	---help---
+	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+	  Interface
+
+
 #
 # USB Multimedia device configuration
 #
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index cc93859..b08bd2b 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -162,6 +162,7 @@
 obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
 # soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
+obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
index 35390d4..1573392 100644
--- a/drivers/media/video/ak881x.c
+++ b/drivers/media/video/ak881x.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/videodev2.h>
 
 #include <media/ak881x.h>
@@ -141,7 +142,7 @@
 	return ak881x_try_g_mbus_fmt(sd, mf);
 }
 
-static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, int index,
+static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
 				enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 3c9e754..935e0c9 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -66,19 +66,58 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
 
-#include "bw-qcam.h"
+/* One from column A... */
+#define QC_NOTSET 0
+#define QC_UNIDIR 1
+#define QC_BIDIR  2
+#define QC_SERIAL 3
+
+/* ... and one from column B */
+#define QC_ANY          0x00
+#define QC_FORCE_UNIDIR 0x10
+#define QC_FORCE_BIDIR  0x20
+#define QC_FORCE_SERIAL 0x30
+/* in the port_mode member */
+
+#define QC_MODE_MASK    0x07
+#define QC_FORCE_MASK   0x70
+
+#define MAX_HEIGHT 243
+#define MAX_WIDTH 336
+
+/* Bit fields for status flags */
+#define QC_PARAM_CHANGE	0x01 /* Camera status change has occurred */
+
+struct qcam {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct pardevice *pdev;
+	struct parport *pport;
+	struct mutex lock;
+	int width, height;
+	int bpp;
+	int mode;
+	int contrast, brightness, whitebal;
+	int port_mode;
+	int transfer_scale;
+	int top, left;
+	int status;
+	unsigned int saved_bits;
+	unsigned long in_use;
+};
 
 static unsigned int maxpoll = 250;   /* Maximum busy-loop count for qcam I/O */
 static unsigned int yieldlines = 4;  /* Yield after this many during capture */
@@ -93,22 +132,26 @@
  * immediately attempt to initialize qcam */
 module_param(force_init, int, 0);
 
-static inline int read_lpstatus(struct qcam_device *q)
+#define MAX_CAMS 4
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline int read_lpstatus(struct qcam *q)
 {
 	return parport_read_status(q->pport);
 }
 
-static inline int read_lpdata(struct qcam_device *q)
+static inline int read_lpdata(struct qcam *q)
 {
 	return parport_read_data(q->pport);
 }
 
-static inline void write_lpdata(struct qcam_device *q, int d)
+static inline void write_lpdata(struct qcam *q, int d)
 {
 	parport_write_data(q->pport, d);
 }
 
-static inline void write_lpcontrol(struct qcam_device *q, int d)
+static void write_lpcontrol(struct qcam *q, int d)
 {
 	if (d & 0x20) {
 		/* Set bidirectional mode to reverse (data in) */
@@ -124,126 +167,11 @@
 	parport_write_control(q->pport, d);
 }
 
-static int qc_waithand(struct qcam_device *q, int val);
-static int qc_command(struct qcam_device *q, int command);
-static int qc_readparam(struct qcam_device *q);
-static int qc_setscanmode(struct qcam_device *q);
-static int qc_readbytes(struct qcam_device *q, char buffer[]);
-
-static struct video_device qcam_template;
-
-static int qc_calibrate(struct qcam_device *q)
-{
-	/*
-	 *	Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
-	 *	The white balance is an individiual value for each
-	 *	quickcam.
-	 */
-
-	int value;
-	int count = 0;
-
-	qc_command(q, 27);	/* AutoAdjustOffset */
-	qc_command(q, 0);	/* Dummy Parameter, ignored by the camera */
-
-	/* GetOffset (33) will read 255 until autocalibration */
-	/* is finished. After that, a value of 1-254 will be */
-	/* returned. */
-
-	do {
-		qc_command(q, 33);
-		value = qc_readparam(q);
-		mdelay(1);
-		schedule();
-		count++;
-	} while (value == 0xff && count < 2048);
-
-	q->whitebal = value;
-	return value;
-}
-
-/* Initialize the QuickCam driver control structure.  This is where
- * defaults are set for people who don't have a config file.*/
-
-static struct qcam_device *qcam_init(struct parport *port)
-{
-	struct qcam_device *q;
-
-	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
-	if (q == NULL)
-		return NULL;
-
-	q->pport = port;
-	q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
-			NULL, 0, NULL);
-	if (q->pdev == NULL) {
-		printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
-				port->name);
-		kfree(q);
-		return NULL;
-	}
-
-	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-
-	mutex_init(&q->lock);
-
-	q->port_mode = (QC_ANY | QC_NOTSET);
-	q->width = 320;
-	q->height = 240;
-	q->bpp = 4;
-	q->transfer_scale = 2;
-	q->contrast = 192;
-	q->brightness = 180;
-	q->whitebal = 105;
-	q->top = 1;
-	q->left = 14;
-	q->mode = -1;
-	q->status = QC_PARAM_CHANGE;
-	return q;
-}
-
-
-/* qc_command is probably a bit of a misnomer -- it's used to send
- * bytes *to* the camera.  Generally, these bytes are either commands
- * or arguments to commands, so the name fits, but it still bugs me a
- * bit.  See the documentation for a list of commands. */
-
-static int qc_command(struct qcam_device *q, int command)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpdata(q, command);
-	write_lpcontrol(q, 6);
-
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
-
-static int qc_readparam(struct qcam_device *q)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpcontrol(q, 6);
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
 
 /* qc_waithand busy-waits for a handshake signal from the QuickCam.
  * Almost all communication with the camera requires handshaking. */
 
-static int qc_waithand(struct qcam_device *q, int val)
+static int qc_waithand(struct qcam *q, int val)
 {
 	int status;
 	int runs = 0;
@@ -286,7 +214,7 @@
  * (bit 3 of status register).  It also returns the last value read,
  * since this data is useful. */
 
-static unsigned int qc_waithand2(struct qcam_device *q, int val)
+static unsigned int qc_waithand2(struct qcam *q, int val)
 {
 	unsigned int status;
 	int runs = 0;
@@ -309,6 +237,43 @@
 	return status;
 }
 
+/* qc_command is probably a bit of a misnomer -- it's used to send
+ * bytes *to* the camera.  Generally, these bytes are either commands
+ * or arguments to commands, so the name fits, but it still bugs me a
+ * bit.  See the documentation for a list of commands. */
+
+static int qc_command(struct qcam *q, int command)
+{
+	int n1, n2;
+	int cmd;
+
+	write_lpdata(q, command);
+	write_lpcontrol(q, 6);
+
+	n1 = qc_waithand(q, 1);
+
+	write_lpcontrol(q, 0xe);
+	n2 = qc_waithand(q, 0);
+
+	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+	return cmd;
+}
+
+static int qc_readparam(struct qcam *q)
+{
+	int n1, n2;
+	int cmd;
+
+	write_lpcontrol(q, 6);
+	n1 = qc_waithand(q, 1);
+
+	write_lpcontrol(q, 0xe);
+	n2 = qc_waithand(q, 0);
+
+	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
+	return cmd;
+}
+
 
 /* Try to detect a QuickCam.  It appears to flash the upper 4 bits of
    the status register at 5-10 Hz.  This is only used in the autoprobe
@@ -317,7 +282,7 @@
    almost completely safe, while their method screws up my printer if
    I plug it in before the camera. */
 
-static int qc_detect(struct qcam_device *q)
+static int qc_detect(struct qcam *q)
 {
 	int reg, lastreg;
 	int count = 0;
@@ -358,41 +323,6 @@
 	}
 }
 
-
-/* Reset the QuickCam.  This uses the same sequence the Windows
- * QuickPic program uses.  Someone with a bi-directional port should
- * check that bi-directional mode is detected right, and then
- * implement bi-directional mode in qc_readbyte(). */
-
-static void qc_reset(struct qcam_device *q)
-{
-	switch (q->port_mode & QC_FORCE_MASK) {
-	case QC_FORCE_UNIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-
-	case QC_FORCE_BIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		break;
-
-	case QC_ANY:
-		write_lpcontrol(q, 0x20);
-		write_lpdata(q, 0x75);
-
-		if (read_lpdata(q) != 0x75)
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		else
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-	}
-
-	write_lpcontrol(q, 0xb);
-	udelay(250);
-	write_lpcontrol(q, 0xe);
-	qc_setscanmode(q);		/* in case port_mode changed */
-}
-
-
 /* Decide which scan mode to use.  There's no real requirement that
  * the scanmode match the resolution in q->height and q-> width -- the
  * camera takes the picture at the resolution specified in the
@@ -402,7 +332,7 @@
  * returned.  If the scan is smaller, then the rest of the image
  * returned contains garbage. */
 
-static int qc_setscanmode(struct qcam_device *q)
+static int qc_setscanmode(struct qcam *q)
 {
 	int old_mode = q->mode;
 
@@ -442,10 +372,45 @@
 }
 
 
+/* Reset the QuickCam.  This uses the same sequence the Windows
+ * QuickPic program uses.  Someone with a bi-directional port should
+ * check that bi-directional mode is detected right, and then
+ * implement bi-directional mode in qc_readbyte(). */
+
+static void qc_reset(struct qcam *q)
+{
+	switch (q->port_mode & QC_FORCE_MASK) {
+	case QC_FORCE_UNIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
+
+	case QC_FORCE_BIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		break;
+
+	case QC_ANY:
+		write_lpcontrol(q, 0x20);
+		write_lpdata(q, 0x75);
+
+		if (read_lpdata(q) != 0x75)
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		else
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
+	}
+
+	write_lpcontrol(q, 0xb);
+	udelay(250);
+	write_lpcontrol(q, 0xe);
+	qc_setscanmode(q);		/* in case port_mode changed */
+}
+
+
+
 /* Reset the QuickCam and program for brightness, contrast,
  * white-balance, and resolution. */
 
-static void qc_set(struct qcam_device *q)
+static void qc_set(struct qcam *q)
 {
 	int val;
 	int val2;
@@ -499,7 +464,7 @@
    the supplied buffer.  It returns the number of bytes read,
    or -1 on error. */
 
-static inline int qc_readbytes(struct qcam_device *q, char buffer[])
+static inline int qc_readbytes(struct qcam *q, char buffer[])
 {
 	int ret = 1;
 	unsigned int hi, lo;
@@ -590,7 +555,7 @@
  * n=2^(bit depth)-1.  Ask me for more details if you don't understand
  * this. */
 
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *q, char __user *buf, unsigned long len)
 {
 	int i, j, k, yield;
 	int bytes;
@@ -674,171 +639,206 @@
  *	Video4linux interfacing
  */
 
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *vcap)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
+	struct qcam *qcam = video_drvdata(file);
 
-	switch (cmd) {
-	case VIDIOCGCAP:
-		{
-			struct video_capability *b = arg;
-			strcpy(b->name, "Quickcam");
-			b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES|VID_TYPE_MONOCHROME;
-			b->channels = 1;
-			b->audios = 0;
-			b->maxwidth = 320;
-			b->maxheight = 240;
-			b->minwidth = 80;
-			b->minheight = 60;
-			return 0;
-		}
-	case VIDIOCGCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			v->flags = 0;
-			v->tuners = 0;
-			/* Good question.. its composite or SVHS so.. */
-			v->type = VIDEO_TYPE_CAMERA;
-			strcpy(v->name, "Camera");
-			return 0;
-		}
-	case VIDIOCSCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCGTUNER:
-		{
-			struct video_tuner *v = arg;
-			if (v->tuner)
-				return -EINVAL;
-			strcpy(v->name, "Format");
-			v->rangelow = 0;
-			v->rangehigh = 0;
-			v->flags = 0;
-			v->mode = VIDEO_MODE_AUTO;
-			return 0;
-		}
-	case VIDIOCSTUNER:
-		{
-			struct video_tuner *v = arg;
-			if (v->tuner)
-				return -EINVAL;
-			if (v->mode != VIDEO_MODE_AUTO)
-				return -EINVAL;
-			return 0;
-		}
-	case VIDIOCGPICT:
-		{
-			struct video_picture *p = arg;
-			p->colour = 0x8000;
-			p->hue = 0x8000;
-			p->brightness = qcam->brightness << 8;
-			p->contrast = qcam->contrast << 8;
-			p->whiteness = qcam->whitebal << 8;
-			p->depth = qcam->bpp;
-			p->palette = VIDEO_PALETTE_GREY;
-			return 0;
-		}
-	case VIDIOCSPICT:
-		{
-			struct video_picture *p = arg;
-			if (p->palette != VIDEO_PALETTE_GREY)
-				return -EINVAL;
-			if (p->depth != 4 && p->depth != 6)
-				return -EINVAL;
-
-			/*
-			 *	Now load the camera.
-			 */
-
-			qcam->brightness = p->brightness >> 8;
-			qcam->contrast = p->contrast >> 8;
-			qcam->whitebal = p->whiteness >> 8;
-			qcam->bpp = p->depth;
-
-			mutex_lock(&qcam->lock);
-			qc_setscanmode(qcam);
-			mutex_unlock(&qcam->lock);
-			qcam->status |= QC_PARAM_CHANGE;
-
-			return 0;
-		}
-	case VIDIOCSWIN:
-		{
-			struct video_window *vw = arg;
-			if (vw->flags)
-				return -EINVAL;
-			if (vw->clipcount)
-				return -EINVAL;
-			if (vw->height < 60 || vw->height > 240)
-				return -EINVAL;
-			if (vw->width < 80 || vw->width > 320)
-				return -EINVAL;
-
-			qcam->width = 320;
-			qcam->height = 240;
-			qcam->transfer_scale = 4;
-
-			if (vw->width >= 160 && vw->height >= 120)
-				qcam->transfer_scale = 2;
-			if (vw->width >= 320 && vw->height >= 240) {
-				qcam->width = 320;
-				qcam->height = 240;
-				qcam->transfer_scale = 1;
-			}
-			mutex_lock(&qcam->lock);
-			qc_setscanmode(qcam);
-			mutex_unlock(&qcam->lock);
-
-			/* We must update the camera before we grab. We could
-			   just have changed the grab size */
-			qcam->status |= QC_PARAM_CHANGE;
-
-			/* Ok we figured out what to use from our wide choice */
-			return 0;
-		}
-	case VIDIOCGWIN:
-		{
-			struct video_window *vw = arg;
-
-			memset(vw, 0, sizeof(*vw));
-			vw->width = qcam->width / qcam->transfer_scale;
-			vw->height = qcam->height / qcam->transfer_scale;
-			return 0;
-		}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
-	default:
-		return -ENOIOCTLCMD;
-	}
+	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	vcap->version = KERNEL_VERSION(0, 0, 2);
+	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
 
-static long qcam_ioctl(struct file *file,
-		unsigned int cmd, unsigned long arg)
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
 {
-	return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+	if (vin->index > 0)
+		return -EINVAL;
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+	return 0;
+}
+
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+	return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+					struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 180);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+	case V4L2_CID_GAMMA:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 105);
+	}
+	return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = qcam->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = qcam->contrast;
+		break;
+	case V4L2_CID_GAMMA:
+		ctrl->value = qcam->whitebal;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	mutex_lock(&qcam->lock);
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		qcam->brightness = ctrl->value;
+		break;
+	case V4L2_CID_CONTRAST:
+		qcam->contrast = ctrl->value;
+		break;
+	case V4L2_CID_GAMMA:
+		qcam->whitebal = ctrl->value;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	if (ret == 0) {
+		qc_setscanmode(qcam);
+		qcam->status |= QC_PARAM_CHANGE;
+	}
+	mutex_unlock(&qcam->lock);
+	return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	pix->width = qcam->width / qcam->transfer_scale;
+	pix->height = qcam->height / qcam->transfer_scale;
+	pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = qcam->width;
+	pix->sizeimage = qcam->width * qcam->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->height <= 60 || pix->width <= 80) {
+		pix->height = 60;
+		pix->width = 80;
+	} else if (pix->height <= 120 || pix->width <= 160) {
+		pix->height = 120;
+		pix->width = 160;
+	} else {
+		pix->height = 240;
+		pix->width = 320;
+	}
+	if (pix->pixelformat != V4L2_PIX_FMT_Y4 &&
+	    pix->pixelformat != V4L2_PIX_FMT_Y6)
+		pix->pixelformat = V4L2_PIX_FMT_Y4;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = pix->width;
+	pix->sizeimage = pix->width * pix->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	qcam->width = 320;
+	qcam->height = 240;
+	if (pix->height == 60)
+		qcam->transfer_scale = 4;
+	else if (pix->height == 120)
+		qcam->transfer_scale = 2;
+	else
+		qcam->transfer_scale = 1;
+	if (pix->pixelformat == V4L2_PIX_FMT_Y6)
+		qcam->bpp = 6;
+	else
+		qcam->bpp = 4;
+
+	mutex_lock(&qcam->lock);
+	qc_setscanmode(qcam);
+	/* We must update the camera before we grab. We could
+	   just have changed the grab size */
+	qcam->status |= QC_PARAM_CHANGE;
+	mutex_unlock(&qcam->lock);
+	return 0;
+}
+
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+	static struct v4l2_fmtdesc formats[] = {
+		{ 0, 0, 0,
+		  "4-Bit Monochrome", V4L2_PIX_FMT_Y4,
+		  { 0, 0, 0, 0 }
+		},
+		{ 0, 0, 0,
+		  "6-Bit Monochrome", V4L2_PIX_FMT_Y6,
+		  { 0, 0, 0, 0 }
+		},
+	};
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 1)
+		return -EINVAL;
+
+	*fmt = formats[fmt->index];
+	fmt->type = type;
+	return 0;
 }
 
 static ssize_t qcam_read(struct file *file, char __user *buf,
 		size_t count, loff_t *ppos)
 {
-	struct video_device *v = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)v;
+	struct qcam *qcam = video_drvdata(file);
 	int len;
 	parport_claim_or_block(qcam->pdev);
 
@@ -858,43 +858,112 @@
 	return len;
 }
 
-static int qcam_exclusive_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
-}
-
-static int qcam_exclusive_release(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	clear_bit(0, &qcam->in_use);
-	return 0;
-}
-
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.open           = qcam_exclusive_open,
-	.release        = qcam_exclusive_release,
-	.ioctl          = qcam_ioctl,
+	.ioctl          = video_ioctl2,
 	.read		= qcam_read,
 };
-static struct video_device qcam_template = {
-	.name		= "Connectix Quickcam",
-	.fops           = &qcam_fops,
-	.release 	= video_device_release_empty,
+
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+	.vidioc_querycap    		    = qcam_querycap,
+	.vidioc_g_input      		    = qcam_g_input,
+	.vidioc_s_input      		    = qcam_s_input,
+	.vidioc_enum_input   		    = qcam_enum_input,
+	.vidioc_queryctrl 		    = qcam_queryctrl,
+	.vidioc_g_ctrl  		    = qcam_g_ctrl,
+	.vidioc_s_ctrl 			    = qcam_s_ctrl,
+	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
 };
 
-#define MAX_CAMS 4
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
+/* Initialize the QuickCam driver control structure.  This is where
+ * defaults are set for people who don't have a config file.*/
+
+static struct qcam *qcam_init(struct parport *port)
+{
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
+
+	qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL);
+	if (qcam == NULL)
+		return NULL;
+
+	v4l2_dev = &qcam->v4l2_dev;
+	strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+
+	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		return NULL;
+	}
+
+	qcam->pport = port;
+	qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+			NULL, 0, NULL);
+	if (qcam->pdev == NULL) {
+		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+		kfree(qcam);
+		return NULL;
+	}
+
+	strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name));
+	qcam->vdev.v4l2_dev = v4l2_dev;
+	qcam->vdev.fops = &qcam_fops;
+	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+	qcam->vdev.release = video_device_release_empty;
+	video_set_drvdata(&qcam->vdev, qcam);
+
+	mutex_init(&qcam->lock);
+
+	qcam->port_mode = (QC_ANY | QC_NOTSET);
+	qcam->width = 320;
+	qcam->height = 240;
+	qcam->bpp = 4;
+	qcam->transfer_scale = 2;
+	qcam->contrast = 192;
+	qcam->brightness = 180;
+	qcam->whitebal = 105;
+	qcam->top = 1;
+	qcam->left = 14;
+	qcam->mode = -1;
+	qcam->status = QC_PARAM_CHANGE;
+	return qcam;
+}
+
+static int qc_calibrate(struct qcam *q)
+{
+	/*
+	 *	Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
+	 *	The white balance is an individual value for each
+	 *	quickcam.
+	 */
+
+	int value;
+	int count = 0;
+
+	qc_command(q, 27);	/* AutoAdjustOffset */
+	qc_command(q, 0);	/* Dummy Parameter, ignored by the camera */
+
+	/* GetOffset (33) will read 255 until autocalibration */
+	/* is finished. After that, a value of 1-254 will be */
+	/* returned. */
+
+	do {
+		qc_command(q, 33);
+		value = qc_readparam(q);
+		mdelay(1);
+		schedule();
+		count++;
+	} while (value == 0xff && count < 2048);
+
+	q->whitebal = value;
+	return value;
+}
 
 static int init_bwqcam(struct parport *port)
 {
-	struct qcam_device *qcam;
+	struct qcam *qcam;
 
 	if (num_cams == MAX_CAMS) {
 		printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS);
@@ -919,7 +988,7 @@
 
 	parport_release(qcam->pdev);
 
-	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
+	v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name);
 
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		parport_unregister_device(qcam->pdev);
@@ -932,7 +1001,7 @@
 	return 0;
 }
 
-static void close_bwqcam(struct qcam_device *qcam)
+static void close_bwqcam(struct qcam *qcam)
 {
 	video_unregister_device(&qcam->vdev);
 	parport_unregister_device(qcam->pdev);
@@ -983,7 +1052,7 @@
 {
 	int i;
 	for (i = 0; i < num_cams; i++) {
-		struct qcam_device *qcam = qcams[i];
+		struct qcam *qcam = qcams[i];
 		if (qcam && qcam->pdev->port == port) {
 			qcams[i] = NULL;
 			close_bwqcam(qcam);
diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h
deleted file mode 100644
index 8a60c5d..0000000
--- a/drivers/media/video/bw-qcam.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *	Video4Linux bw-qcam driver
- *
- *	Derived from code..
- */
-
-/******************************************************************
-
-Copyright (C) 1996 by Scott Laird
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-******************************************************************/
-
-/* One from column A... */
-#define QC_NOTSET 0
-#define QC_UNIDIR 1
-#define QC_BIDIR  2
-#define QC_SERIAL 3
-
-/* ... and one from column B */
-#define QC_ANY          0x00
-#define QC_FORCE_UNIDIR 0x10
-#define QC_FORCE_BIDIR  0x20
-#define QC_FORCE_SERIAL 0x30
-/* in the port_mode member */
-
-#define QC_MODE_MASK    0x07
-#define QC_FORCE_MASK   0x70
-
-#define MAX_HEIGHT 243
-#define MAX_WIDTH 336
-
-/* Bit fields for status flags */
-#define QC_PARAM_CHANGE	0x01 /* Camera status change has occurred */
-
-struct qcam_device {
-	struct video_device vdev;
-	struct pardevice *pdev;
-	struct parport *pport;
-	struct mutex lock;
-	int width, height;
-	int bpp;
-	int mode;
-	int contrast, brightness, whitebal;
-	int port_mode;
-	int transfer_scale;
-	int top, left;
-	int status;
-	unsigned int saved_bits;
-	unsigned long in_use;
-};
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 8f1dd88b..6e4b196 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -33,15 +33,17 @@
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
-
+#include <linux/version.h>
+#include <linux/videodev2.h>
 #include <asm/uaccess.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 
-struct qcam_device {
+struct qcam {
+	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
 	struct pardevice *pdev;
 	struct parport *pport;
@@ -51,7 +53,6 @@
 	int contrast, brightness, whitebal;
 	int top, left;
 	unsigned int bidirectional;
-	unsigned long in_use;
 	struct mutex lock;
 };
 
@@ -68,33 +69,45 @@
 #define QC_DECIMATION_2		2
 #define QC_DECIMATION_4		4
 
-#define BANNER "Colour QuickCam for Video4Linux v0.05"
+#define BANNER "Colour QuickCam for Video4Linux v0.06"
 
 static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
 static int probe = 2;
 static int force_rgb;
 static int video_nr = -1;
 
-static inline void qcam_set_ack(struct qcam_device *qcam, unsigned int i)
+/* FIXME: parport=auto would never have worked, surely? --RR */
+MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
+			  "probe=<0|1|2> for camera detection method\n"
+			  "force_rgb=<0|1> for RGB data format (default BGR)");
+module_param_array(parport, int, NULL, 0);
+module_param(probe, int, 0);
+module_param(force_rgb, bool, 0);
+module_param(video_nr, int, 0);
+
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline void qcam_set_ack(struct qcam *qcam, unsigned int i)
 {
 	/* note: the QC specs refer to the PCAck pin by voltage, not
 	   software level.  PC ports have builtin inverters. */
 	parport_frob_control(qcam->pport, 8, i ? 8 : 0);
 }
 
-static inline unsigned int qcam_ready1(struct qcam_device *qcam)
+static inline unsigned int qcam_ready1(struct qcam *qcam)
 {
 	return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0;
 }
 
-static inline unsigned int qcam_ready2(struct qcam_device *qcam)
+static inline unsigned int qcam_ready2(struct qcam *qcam)
 {
 	return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0;
 }
 
-static unsigned int qcam_await_ready1(struct qcam_device *qcam,
-					     int value)
+static unsigned int qcam_await_ready1(struct qcam *qcam, int value)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned long oldjiffies = jiffies;
 	unsigned int i;
 
@@ -112,14 +125,15 @@
 	}
 
 	/* Probably somebody pulled the plug out.  Not much we can do. */
-	printk(KERN_ERR "c-qcam: ready1 timeout (%d) %x %x\n", value,
+	v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value,
 	       parport_read_status(qcam->pport),
 	       parport_read_control(qcam->pport));
 	return 1;
 }
 
-static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
+static unsigned int qcam_await_ready2(struct qcam *qcam, int value)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned long oldjiffies = jiffies;
 	unsigned int i;
 
@@ -137,14 +151,14 @@
 	}
 
 	/* Probably somebody pulled the plug out.  Not much we can do. */
-	printk(KERN_ERR "c-qcam: ready2 timeout (%d) %x %x %x\n", value,
+	v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value,
 	       parport_read_status(qcam->pport),
 	       parport_read_control(qcam->pport),
 	       parport_read_data(qcam->pport));
 	return 1;
 }
 
-static int qcam_read_data(struct qcam_device *qcam)
+static int qcam_read_data(struct qcam *qcam)
 {
 	unsigned int idata;
 
@@ -159,21 +173,22 @@
 	return idata;
 }
 
-static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
+static int qcam_write_data(struct qcam *qcam, unsigned int data)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned int idata;
 
 	parport_write_data(qcam->pport, data);
 	idata = qcam_read_data(qcam);
 	if (data != idata) {
-		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
+		v4l2_warn(v4l2_dev, "sent %x but received %x\n", data,
 		       idata);
 		return 1;
 	}
 	return 0;
 }
 
-static inline int qcam_set(struct qcam_device *qcam, unsigned int cmd, unsigned int data)
+static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data)
 {
 	if (qcam_write_data(qcam, cmd))
 		return -1;
@@ -182,14 +197,14 @@
 	return 0;
 }
 
-static inline int qcam_get(struct qcam_device *qcam, unsigned int cmd)
+static inline int qcam_get(struct qcam *qcam, unsigned int cmd)
 {
 	if (qcam_write_data(qcam, cmd))
 		return -1;
 	return qcam_read_data(qcam);
 }
 
-static int qc_detect(struct qcam_device *qcam)
+static int qc_detect(struct qcam *qcam)
 {
 	unsigned int stat, ostat, i, count = 0;
 
@@ -246,7 +261,7 @@
 	return 0;
 }
 
-static void qc_reset(struct qcam_device *qcam)
+static void qc_reset(struct qcam *qcam)
 {
 	parport_write_control(qcam->pport, 0xc);
 	parport_write_control(qcam->pport, 0x8);
@@ -258,55 +273,55 @@
 /* Reset the QuickCam and program for brightness, contrast,
  * white-balance, and resolution. */
 
-static void qc_setup(struct qcam_device *q)
+static void qc_setup(struct qcam *qcam)
 {
-	qc_reset(q);
+	qc_reset(qcam);
 
 	/* Set the brightness. */
-	qcam_set(q, 11, q->brightness);
+	qcam_set(qcam, 11, qcam->brightness);
 
 	/* Set the height and width.  These refer to the actual
 	   CCD area *before* applying the selected decimation.  */
-	qcam_set(q, 17, q->ccd_height);
-	qcam_set(q, 19, q->ccd_width / 2);
+	qcam_set(qcam, 17, qcam->ccd_height);
+	qcam_set(qcam, 19, qcam->ccd_width / 2);
 
 	/* Set top and left.  */
-	qcam_set(q, 0xd, q->top);
-	qcam_set(q, 0xf, q->left);
+	qcam_set(qcam, 0xd, qcam->top);
+	qcam_set(qcam, 0xf, qcam->left);
 
 	/* Set contrast and white balance.  */
-	qcam_set(q, 0x19, q->contrast);
-	qcam_set(q, 0x1f, q->whitebal);
+	qcam_set(qcam, 0x19, qcam->contrast);
+	qcam_set(qcam, 0x1f, qcam->whitebal);
 
 	/* Set the speed.  */
-	qcam_set(q, 45, 2);
+	qcam_set(qcam, 45, 2);
 }
 
 /* Read some bytes from the camera and put them in the buffer.
    nbytes should be a multiple of 3, because bidirectional mode gives
    us three bytes at a time.  */
 
-static unsigned int qcam_read_bytes(struct qcam_device *q, unsigned char *buf, unsigned int nbytes)
+static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes)
 {
 	unsigned int bytes = 0;
 
-	qcam_set_ack(q, 0);
-	if (q->bidirectional) {
+	qcam_set_ack(qcam, 0);
+	if (qcam->bidirectional) {
 		/* It's a bidirectional port */
 		while (bytes < nbytes) {
 			unsigned int lo1, hi1, lo2, hi2;
 			unsigned char r, g, b;
 
-			if (qcam_await_ready2(q, 1))
+			if (qcam_await_ready2(qcam, 1))
 				return bytes;
-			lo1 = parport_read_data(q->pport) >> 1;
-			hi1 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
-			qcam_set_ack(q, 1);
-			if (qcam_await_ready2(q, 0))
+			lo1 = parport_read_data(qcam->pport) >> 1;
+			hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready2(qcam, 0))
 				return bytes;
-			lo2 = parport_read_data(q->pport) >> 1;
-			hi2 = ((parport_read_status(q->pport) >> 3) & 0x1f) ^ 0x10;
-			qcam_set_ack(q, 0);
+			lo2 = parport_read_data(qcam->pport) >> 1;
+			hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 0);
 			r = lo1 | ((hi1 & 1) << 7);
 			g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1);
 			b = lo2 | ((hi2 & 1) << 7);
@@ -328,14 +343,14 @@
 		while (bytes < nbytes) {
 			unsigned int hi, lo;
 
-			if (qcam_await_ready1(q, 1))
+			if (qcam_await_ready1(qcam, 1))
 				return bytes;
-			hi = (parport_read_status(q->pport) & 0xf0);
-			qcam_set_ack(q, 1);
-			if (qcam_await_ready1(q, 0))
+			hi = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready1(qcam, 0))
 				return bytes;
-			lo = (parport_read_status(q->pport) & 0xf0);
-			qcam_set_ack(q, 0);
+			lo = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 0);
 			/* flip some bits */
 			rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
 			if (i >= 2) {
@@ -361,10 +376,11 @@
 
 #define BUFSZ	150
 
-static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len)
 {
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
 	unsigned lines, pixelsperline, bitsperxfer;
-	unsigned int is_bi_dir = q->bidirectional;
+	unsigned int is_bi_dir = qcam->bidirectional;
 	size_t wantlen, outptr = 0;
 	char tmpbuf[BUFSZ];
 
@@ -373,10 +389,10 @@
 
 	/* Wait for camera to become ready */
 	for (;;) {
-		int i = qcam_get(q, 41);
+		int i = qcam_get(qcam, 41);
 
 		if (i == -1) {
-			qc_setup(q);
+			qc_setup(qcam);
 			return -EIO;
 		}
 		if ((i & 0x80) == 0)
@@ -384,25 +400,25 @@
 		schedule();
 	}
 
-	if (qcam_set(q, 7, (q->mode | (is_bi_dir ? 1 : 0)) + 1))
+	if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1))
 		return -EIO;
 
-	lines = q->height;
-	pixelsperline = q->width;
+	lines = qcam->height;
+	pixelsperline = qcam->width;
 	bitsperxfer = (is_bi_dir) ? 24 : 8;
 
 	if (is_bi_dir) {
 		/* Turn the port around */
-		parport_data_reverse(q->pport);
+		parport_data_reverse(qcam->pport);
 		mdelay(3);
-		qcam_set_ack(q, 0);
-		if (qcam_await_ready1(q, 1)) {
-			qc_setup(q);
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			qc_setup(qcam);
 			return -EIO;
 		}
-		qcam_set_ack(q, 1);
-		if (qcam_await_ready1(q, 0)) {
-			qc_setup(q);
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			qc_setup(qcam);
 			return -EIO;
 		}
 	}
@@ -413,7 +429,7 @@
 		size_t t, s;
 
 		s = (wantlen > BUFSZ) ? BUFSZ : wantlen;
-		t = qcam_read_bytes(q, tmpbuf, s);
+		t = qcam_read_bytes(qcam, tmpbuf, s);
 		if (outptr < len) {
 			size_t sz = len - outptr;
 
@@ -432,10 +448,10 @@
 	len = outptr;
 
 	if (wantlen) {
-		printk(KERN_ERR "qcam: short read.\n");
+		v4l2_err(v4l2_dev, "short read.\n");
 		if (is_bi_dir)
-			parport_data_forward(q->pport);
-		qc_setup(q);
+			parport_data_forward(qcam->pport);
+		qc_setup(qcam);
 		return len;
 	}
 
@@ -443,49 +459,49 @@
 		int l;
 
 		do {
-			l = qcam_read_bytes(q, tmpbuf, 3);
+			l = qcam_read_bytes(qcam, tmpbuf, 3);
 			cond_resched();
 		} while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
 		if (force_rgb) {
 			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		} else {
 			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		}
-		qcam_set_ack(q, 0);
-		if (qcam_await_ready1(q, 1)) {
-			printk(KERN_ERR "qcam: no ack after EOF\n");
-			parport_data_forward(q->pport);
-			qc_setup(q);
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			v4l2_err(v4l2_dev, "no ack after EOF\n");
+			parport_data_forward(qcam->pport);
+			qc_setup(qcam);
 			return len;
 		}
-		parport_data_forward(q->pport);
+		parport_data_forward(qcam->pport);
 		mdelay(3);
-		qcam_set_ack(q, 1);
-		if (qcam_await_ready1(q, 0)) {
-			printk(KERN_ERR "qcam: no ack to port turnaround\n");
-			qc_setup(q);
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			v4l2_err(v4l2_dev, "no ack to port turnaround\n");
+			qc_setup(qcam);
 			return len;
 		}
 	} else {
 		int l;
 
 		do {
-			l = qcam_read_bytes(q, tmpbuf, 1);
+			l = qcam_read_bytes(qcam, tmpbuf, 1);
 			cond_resched();
 		} while (l && tmpbuf[0] == 0x7e);
-		l = qcam_read_bytes(q, tmpbuf + 1, 2);
+		l = qcam_read_bytes(qcam, tmpbuf + 1, 2);
 		if (force_rgb) {
 			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		} else {
 			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
-				printk(KERN_ERR "qcam: bad EOF\n");
+				v4l2_err(v4l2_dev, "bad EOF\n");
 		}
 	}
 
-	qcam_write_data(q, 0);
+	qcam_write_data(qcam, 0);
 	return len;
 }
 
@@ -493,184 +509,202 @@
  *	Video4linux interfacing
  */
 
-static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int qcam_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *vcap)
 {
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
+	struct qcam *qcam = video_drvdata(file);
 
-	switch (cmd) {
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-
-		strcpy(b->name, "Quickcam");
-		b->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = 320;
-		b->maxheight = 240;
-		b->minwidth = 80;
-		b->minheight = 60;
-		return 0;
-	}
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		v->flags = 0;
-		v->tuners = 0;
-		/* Good question.. its composite or SVHS so.. */
-		v->type = VIDEO_TYPE_CAMERA;
-		strcpy(v->name, "Camera");
-		return 0;
-	}
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-
-		if (v->channel != 0)
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGTUNER:
-	{
-		struct video_tuner *v = arg;
-
-		if (v->tuner)
-			return -EINVAL;
-		memset(v, 0, sizeof(*v));
-		strcpy(v->name, "Format");
-		v->mode = VIDEO_MODE_AUTO;
-		return 0;
-	}
-	case VIDIOCSTUNER:
-	{
-		struct video_tuner *v = arg;
-
-		if (v->tuner)
-			return -EINVAL;
-		if (v->mode != VIDEO_MODE_AUTO)
-			return -EINVAL;
-		return 0;
-	}
-	case VIDIOCGPICT:
-	{
-		struct video_picture *p = arg;
-
-		p->colour = 0x8000;
-		p->hue = 0x8000;
-		p->brightness = qcam->brightness << 8;
-		p->contrast = qcam->contrast << 8;
-		p->whiteness = qcam->whitebal << 8;
-		p->depth = 24;
-		p->palette = VIDEO_PALETTE_RGB24;
-		return 0;
-	}
-	case VIDIOCSPICT:
-	{
-		struct video_picture *p = arg;
-
-		/*
-		 *	Sanity check args
-		 */
-		if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
-			return -EINVAL;
-
-		/*
-		 *	Now load the camera.
-		 */
-		qcam->brightness = p->brightness >> 8;
-		qcam->contrast = p->contrast >> 8;
-		qcam->whitebal = p->whiteness >> 8;
-
-		mutex_lock(&qcam->lock);
-		parport_claim_or_block(qcam->pdev);
-		qc_setup(qcam);
-		parport_release(qcam->pdev);
-		mutex_unlock(&qcam->lock);
-		return 0;
-	}
-	case VIDIOCSWIN:
-	{
-		struct video_window *vw = arg;
-
-		if (vw->flags)
-			return -EINVAL;
-		if (vw->clipcount)
-			return -EINVAL;
-		if (vw->height < 60 || vw->height > 240)
-			return -EINVAL;
-		if (vw->width < 80 || vw->width > 320)
-			return -EINVAL;
-
-		qcam->width = 80;
-		qcam->height = 60;
-		qcam->mode = QC_DECIMATION_4;
-
-		if (vw->width >= 160 && vw->height >= 120) {
-			qcam->width = 160;
-			qcam->height = 120;
-			qcam->mode = QC_DECIMATION_2;
-		}
-		if (vw->width >= 320 && vw->height >= 240) {
-			qcam->width = 320;
-			qcam->height = 240;
-			qcam->mode = QC_DECIMATION_1;
-		}
-		qcam->mode |= QC_MILLIONS;
-#if 0
-		if (vw->width >= 640 && vw->height >= 480) {
-			qcam->width = 640;
-			qcam->height = 480;
-			qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
-		}
-#endif
-		/* Ok we figured out what to use from our
-		   wide choice */
-		mutex_lock(&qcam->lock);
-		parport_claim_or_block(qcam->pdev);
-		qc_setup(qcam);
-		parport_release(qcam->pdev);
-		mutex_unlock(&qcam->lock);
-		return 0;
-	}
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-		memset(vw, 0, sizeof(*vw));
-		vw->width = qcam->width;
-		vw->height = qcam->height;
-		return 0;
-	}
-	case VIDIOCKEY:
-		return 0;
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		return -EINVAL;
-	default:
-		return -ENOIOCTLCMD;
-	}
+	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	vcap->version = KERNEL_VERSION(0, 0, 3);
+	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
 
-static long qcam_ioctl(struct file *file,
-		      unsigned int cmd, unsigned long arg)
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
 {
-	return video_usercopy(file, cmd, arg, qcam_do_ioctl);
+	if (vin->index > 0)
+		return -EINVAL;
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+	return 0;
+}
+
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+	return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+					struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 240);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+	case V4L2_CID_GAMMA:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+	}
+	return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = qcam->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = qcam->contrast;
+		break;
+	case V4L2_CID_GAMMA:
+		ctrl->value = qcam->whitebal;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	mutex_lock(&qcam->lock);
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		qcam->brightness = ctrl->value;
+		break;
+	case V4L2_CID_CONTRAST:
+		qcam->contrast = ctrl->value;
+		break;
+	case V4L2_CID_GAMMA:
+		qcam->whitebal = ctrl->value;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	if (ret == 0) {
+		parport_claim_or_block(qcam->pdev);
+		qc_setup(qcam);
+		parport_release(qcam->pdev);
+	}
+	mutex_unlock(&qcam->lock);
+	return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	pix->width = qcam->width;
+	pix->height = qcam->height;
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * qcam->width;
+	pix->sizeimage = 3 * qcam->width * qcam->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->height < 60 || pix->width < 80) {
+		pix->height = 60;
+		pix->width = 80;
+	} else if (pix->height < 120 || pix->width < 160) {
+		pix->height = 120;
+		pix->width = 160;
+	} else {
+		pix->height = 240;
+		pix->width = 320;
+	}
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * pix->width;
+	pix->sizeimage = 3 * pix->width * pix->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	switch (pix->height) {
+	case 60:
+		qcam->mode = QC_DECIMATION_4;
+		break;
+	case 120:
+		qcam->mode = QC_DECIMATION_2;
+		break;
+	default:
+		qcam->mode = QC_DECIMATION_1;
+		break;
+	}
+
+	mutex_lock(&qcam->lock);
+	qcam->mode |= QC_MILLIONS;
+	qcam->height = pix->height;
+	qcam->width = pix->width;
+	parport_claim_or_block(qcam->pdev);
+	qc_setup(qcam);
+	parport_release(qcam->pdev);
+	mutex_unlock(&qcam->lock);
+	return 0;
+}
+
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+	static struct v4l2_fmtdesc formats[] = {
+		{ 0, 0, 0,
+		  "RGB 8:8:8", V4L2_PIX_FMT_RGB24,
+		  { 0, 0, 0, 0 }
+		},
+	};
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	*fmt = formats[fmt->index];
+	fmt->type = type;
+	return 0;
 }
 
 static ssize_t qcam_read(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
-	struct video_device *v = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)v;
+	struct qcam *qcam = video_drvdata(file);
 	int len;
 
 	mutex_lock(&qcam->lock);
@@ -682,81 +716,80 @@
 	return len;
 }
 
-static int qcam_exclusive_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0;
-}
-
-static int qcam_exclusive_release(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam = (struct qcam_device *)dev;
-
-	clear_bit(0, &qcam->in_use);
-	return 0;
-}
-
-/* video device template */
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.open           = qcam_exclusive_open,
-	.release        = qcam_exclusive_release,
-	.ioctl          = qcam_ioctl,
+	.ioctl		= video_ioctl2,
 	.read		= qcam_read,
 };
 
-static struct video_device qcam_template = {
-	.name		= "Colour QuickCam",
-	.fops           = &qcam_fops,
-	.release 	= video_device_release_empty,
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+	.vidioc_querycap    		    = qcam_querycap,
+	.vidioc_g_input      		    = qcam_g_input,
+	.vidioc_s_input      		    = qcam_s_input,
+	.vidioc_enum_input   		    = qcam_enum_input,
+	.vidioc_queryctrl 		    = qcam_queryctrl,
+	.vidioc_g_ctrl  		    = qcam_g_ctrl,
+	.vidioc_s_ctrl 			    = qcam_s_ctrl,
+	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
 };
 
 /* Initialize the QuickCam driver control structure. */
 
-static struct qcam_device *qcam_init(struct parport *port)
+static struct qcam *qcam_init(struct parport *port)
 {
-	struct qcam_device *q;
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
 
-	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
-	if (q == NULL)
+	qcam = kzalloc(sizeof(*qcam), GFP_KERNEL);
+	if (qcam == NULL)
 		return NULL;
 
-	q->pport = port;
-	q->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
-					  NULL, 0, NULL);
+	v4l2_dev = &qcam->v4l2_dev;
+	strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name));
 
-	q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
-
-	if (q->pdev == NULL) {
-		printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
-		       port->name);
-		kfree(q);
+	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
 		return NULL;
 	}
 
-	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
+	qcam->pport = port;
+	qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
+					  NULL, 0, NULL);
 
-	mutex_init(&q->lock);
-	q->width = q->ccd_width = 320;
-	q->height = q->ccd_height = 240;
-	q->mode = QC_MILLIONS | QC_DECIMATION_1;
-	q->contrast = 192;
-	q->brightness = 240;
-	q->whitebal = 128;
-	q->top = 1;
-	q->left = 14;
-	return q;
+	qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
+
+	if (qcam->pdev == NULL) {
+		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+		kfree(qcam);
+		return NULL;
+	}
+
+	strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name));
+	qcam->vdev.v4l2_dev = v4l2_dev;
+	qcam->vdev.fops = &qcam_fops;
+	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+	qcam->vdev.release = video_device_release_empty;
+	video_set_drvdata(&qcam->vdev, qcam);
+
+	mutex_init(&qcam->lock);
+	qcam->width = qcam->ccd_width = 320;
+	qcam->height = qcam->ccd_height = 240;
+	qcam->mode = QC_MILLIONS | QC_DECIMATION_1;
+	qcam->contrast = 192;
+	qcam->brightness = 240;
+	qcam->whitebal = 128;
+	qcam->top = 1;
+	qcam->left = 14;
+	return qcam;
 }
 
-static struct qcam_device *qcams[MAX_CAMS];
-static unsigned int num_cams;
-
 static int init_cqcam(struct parport *port)
 {
-	struct qcam_device *qcam;
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
 
 	if (parport[0] != -1) {
 		/* The user gave specific instructions */
@@ -777,6 +810,8 @@
 	if (qcam == NULL)
 		return -ENODEV;
 
+	v4l2_dev = &qcam->v4l2_dev;
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
@@ -793,14 +828,14 @@
 	parport_release(qcam->pdev);
 
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
+		v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n",
 		       qcam->pport->name);
 		parport_unregister_device(qcam->pdev);
 		kfree(qcam);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "%s: Colour QuickCam found on %s\n",
+	v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n",
 	       video_device_node_name(&qcam->vdev), qcam->pport->name);
 
 	qcams[num_cams++] = qcam;
@@ -808,7 +843,7 @@
 	return 0;
 }
 
-static void close_cqcam(struct qcam_device *qcam)
+static void close_cqcam(struct qcam *qcam)
 {
 	video_unregister_device(&qcam->vdev);
 	parport_unregister_device(qcam->pdev);
@@ -833,7 +868,7 @@
 
 static int __init cqcam_init(void)
 {
-	printk(BANNER "\n");
+	printk(KERN_INFO BANNER "\n");
 
 	return parport_register_driver(&cqcam_driver);
 }
@@ -852,14 +887,5 @@
 MODULE_DESCRIPTION(BANNER);
 MODULE_LICENSE("GPL");
 
-/* FIXME: parport=auto would never have worked, surely? --RR */
-MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
-			  "probe=<0|1|2> for camera detection method\n"
-			  "force_rgb=<0|1> for RGB data format (default BGR)");
-module_param_array(parport, int, NULL, 0);
-module_param(probe, int, 0);
-module_param(force_rgb, bool, 0);
-module_param(video_nr, int, 0);
-
 module_init(cqcam_init);
 module_exit(cqcam_cleanup);
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index b5d7cbf..d50d69d 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -1,7 +1,7 @@
 /*
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
  *
  *  Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.c b/drivers/media/video/cx18/cx18-alsa-mixer.c
index ef21114..341bddc 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.c
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.c
@@ -2,7 +2,7 @@
  *  ALSA mixer controls for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-mixer.h b/drivers/media/video/cx18/cx18-alsa-mixer.h
index 2d418db..ec92387 100644
--- a/drivers/media/video/cx18/cx18-alsa-mixer.h
+++ b/drivers/media/video/cx18/cx18-alsa-mixer.h
@@ -2,7 +2,7 @@
  *  ALSA mixer controls for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
index 2bd312d..8f55692 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -2,7 +2,7 @@
  *  ALSA PCM device for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *  Copyright (C) 2009  Devin Heitmueller <dheitmueller@kernellabs.com>
  *
  *  Portions of this work were sponsored by ONELAN Limited.
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.h b/drivers/media/video/cx18/cx18-alsa-pcm.h
index 325662c..d26e51f9 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.h
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.h
@@ -2,7 +2,7 @@
  *  ALSA PCM device for the
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-alsa.h b/drivers/media/video/cx18/cx18-alsa.h
index 88a1cde..447da37 100644
--- a/drivers/media/video/cx18/cx18-alsa.h
+++ b/drivers/media/video/cx18/cx18-alsa.h
@@ -1,7 +1,7 @@
 /*
  *  ALSA interface to cx18 PCM capture streams
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c
index 9e30983..43d09a2 100644
--- a/drivers/media/video/cx18/cx18-av-audio.c
+++ b/drivers/media/video/cx18/cx18-av-audio.c
@@ -4,7 +4,7 @@
  *  Derived from cx25840-audio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 0e5006b..a41951c 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -4,7 +4,7 @@
  *  Derived from cx25840-core.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -1021,86 +1021,74 @@
 	return -EINVAL;
 }
 
-static int cx18_av_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return cx18_av_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
-static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
 	struct cx18_av_state *state = to_cx18_av_state(sd);
 	struct cx18 *cx = v4l2_get_subdevdata(sd);
-
-	struct v4l2_pix_format *pix;
 	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
 	int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		pix = &(fmt->fmt.pix);
-
-		Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
-		Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
-
-		Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
-		Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
-
-		/*
-		 * This adjustment reflects the excess of vactive, set in
-		 * cx18_av_std_setup(), above standard values:
-		 *
-		 * 480 + 1 for 60 Hz systems
-		 * 576 + 3 for 50 Hz systems
-		 */
-		Vlines = pix->height + (is_50Hz ? 3 : 1);
-
-		/*
-		 * Invalid height and width scaling requests are:
-		 * 1. width less than 1/16 of the source width
-		 * 2. width greater than the source width
-		 * 3. height less than 1/8 of the source height
-		 * 4. height greater than the source height
-		 */
-		if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
-		    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
-			CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
-				     pix->width, pix->height);
-			return -ERANGE;
-		}
-
-		HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
-		VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
-		VSC &= 0x1fff;
-
-		if (pix->width >= 385)
-			filter = 0;
-		else if (pix->width > 192)
-			filter = 1;
-		else if (pix->width > 96)
-			filter = 2;
-		else
-			filter = 3;
-
-		CX18_DEBUG_INFO_DEV(sd,
-				    "decoder set size %dx%d -> scale  %ux%u\n",
-				    pix->width, pix->height, HSC, VSC);
-
-		/* HSCALE=HSC */
-		cx18_av_write(cx, 0x418, HSC & 0xff);
-		cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
-		cx18_av_write(cx, 0x41a, HSC >> 16);
-		/* VSCALE=VSC */
-		cx18_av_write(cx, 0x41c, VSC & 0xff);
-		cx18_av_write(cx, 0x41d, VSC >> 8);
-		/* VS_INTRLACE=1 VFILT=filter */
-		cx18_av_write(cx, 0x41e, 0x8 | filter);
-		break;
-
-	default:
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
 		return -EINVAL;
+
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
+	Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
+
+	Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
+	Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
+
+	/*
+	 * This adjustment reflects the excess of vactive, set in
+	 * cx18_av_std_setup(), above standard values:
+	 *
+	 * 480 + 1 for 60 Hz systems
+	 * 576 + 3 for 50 Hz systems
+	 */
+	Vlines = fmt->height + (is_50Hz ? 3 : 1);
+
+	/*
+	 * Invalid height and width scaling requests are:
+	 * 1. width less than 1/16 of the source width
+	 * 2. width greater than the source width
+	 * 3. height less than 1/8 of the source height
+	 * 4. height greater than the source height
+	 */
+	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+	    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+		CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
+			     fmt->width, fmt->height);
+		return -ERANGE;
 	}
+
+	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+	VSC &= 0x1fff;
+
+	if (fmt->width >= 385)
+		filter = 0;
+	else if (fmt->width > 192)
+		filter = 1;
+	else if (fmt->width > 96)
+		filter = 2;
+	else
+		filter = 3;
+
+	CX18_DEBUG_INFO_DEV(sd,
+			    "decoder set size %dx%d -> scale  %ux%u\n",
+			    fmt->width, fmt->height, HSC, VSC);
+
+	/* HSCALE=HSC */
+	cx18_av_write(cx, 0x418, HSC & 0xff);
+	cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
+	cx18_av_write(cx, 0x41a, HSC >> 16);
+	/* VSCALE=VSC */
+	cx18_av_write(cx, 0x41c, VSC & 0xff);
+	cx18_av_write(cx, 0x41d, VSC >> 8);
+	/* VS_INTRLACE=1 VFILT=filter */
+	cx18_av_write(cx, 0x41e, 0x8 | filter);
 	return 0;
 }
 
@@ -1398,8 +1386,7 @@
 static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
 	.s_routing = cx18_av_s_video_routing,
 	.s_stream = cx18_av_s_stream,
-	.g_fmt = cx18_av_g_fmt,
-	.s_fmt = cx18_av_s_fmt,
+	.s_mbus_fmt = cx18_av_s_mbus_fmt,
 };
 
 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index c106967..1956991 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -4,7 +4,7 @@
  *  Derived from cx25840-core.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index b9e8cc5..280aa4d 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -2,7 +2,7 @@
  *  cx18 ADEC firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 74e122b..6b805af 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index 796e517..3e75006 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-cards.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 4b4b465..67043c7 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -297,14 +297,13 @@
 		if (p.video_encoding != cx->params.video_encoding) {
 			int is_mpeg1 = p.video_encoding ==
 						V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-			struct v4l2_format fmt;
+			struct v4l2_mbus_framefmt fmt;
 
 			/* fix videodecoder resolution */
-			fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			fmt.fmt.pix.width = cx->params.width
-						/ (is_mpeg1 ? 2 : 1);
-			fmt.fmt.pix.height = cx->params.height;
-			v4l2_subdev_call(cx->sd_av, video, s_fmt, &fmt);
+			fmt.width = cx->params.width / (is_mpeg1 ? 2 : 1);
+			fmt.height = cx->params.height;
+			fmt.code = V4L2_MBUS_FMT_FIXED;
+			v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt);
 		}
 		priv.cx = cx;
 		priv.s = &cx->streams[id->type];
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index c95a86b..df60f27 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-driver.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index b9728e8..9bc51a9 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-driver.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 0ae2c2e..6d19f04 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -2,7 +2,7 @@
  *  cx18 functions for DVB support
  *
  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index e12a150..9f23b90 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-fileops.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 83cd559..1b3fb50 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -2,7 +2,7 @@
  *  cx18 firmware functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index 86a204b..5374aeb 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-gpio.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index f9a5ca3..4aea2ef 100644
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-gpio.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index cfa1f28..809f7d3 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-i2c.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
index ec5b3d7..49b9dbd 100644
--- a/drivers/media/video/cx18/cx18-io.c
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -2,7 +2,7 @@
  *  cx18 driver PCI memory mapped IO access routines
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
index 2635b3a..18974d8 100644
--- a/drivers/media/video/cx18/cx18-io.h
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -2,7 +2,7 @@
  *  cx18 driver PCI memory mapped IO access routines
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
 /*
  * Readback and retry of MMIO access for reliability:
  * The concept was suggested by Steve Toth <stoth@linuxtv.org>.
- * The implmentation is the fault of Andy Walls <awalls@radix.net>.
+ * The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>.
  *
  * *write* functions are implied to retry the mmio unless suffixed with _noretry
  * *read* functions never retry the mmio (it never helps to do so)
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 2530fc5..20eaf38 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-ioctl.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -274,6 +274,7 @@
 {
 	struct cx18_open_id *id = fh;
 	struct cx18 *cx = id->cx;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret;
 	int w, h;
 
@@ -293,9 +294,10 @@
 	if (atomic_read(&cx->ana_capturing) > 0)
 		return -EBUSY;
 
-	cx->params.width = w;
-	cx->params.height = h;
-	v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
+	mbus_fmt.width = cx->params.width = w;
+	mbus_fmt.height = cx->params.height = h;
+	mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+	v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt);
 	return cx18_g_fmt_vid_cap(file, fh, fmt);
 }
 
diff --git a/drivers/media/video/cx18/cx18-ioctl.h b/drivers/media/video/cx18/cx18-ioctl.h
index e2ca0d1..dcb2559 100644
--- a/drivers/media/video/cx18/cx18-ioctl.h
+++ b/drivers/media/video/cx18/cx18-ioctl.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-ioctl.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index af2f504..80edfe9 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -2,7 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h
index 91f0b52..30e7eaf 100644
--- a/drivers/media/video/cx18/cx18-irq.h
+++ b/drivers/media/video/cx18/cx18-irq.h
@@ -2,7 +2,7 @@
  *  cx18 interrupt handling
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 6dcce29..956aa19 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -2,7 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 33a3491..077952f 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -2,7 +2,7 @@
  *  cx18 mailbox functions
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index aefc8c8cf..8884537 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-queue.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 88a6d34..4201ddc 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-queue.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c
index 34b4d03..85cc596 100644
--- a/drivers/media/video/cx18/cx18-scb.c
+++ b/drivers/media/video/cx18/cx18-scb.c
@@ -2,7 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 368f23d..0887765 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -2,7 +2,7 @@
  *  cx18 System Control Block initialization
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index f5c9126..9045f1ec 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -4,7 +4,7 @@
  *  Derived from ivtv-streams.c
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 0bff0fa..77412be 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -4,7 +4,7 @@
  *  Derived from ivtv-streams.h
  *
  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
- *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index 2782709..e760145 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -993,6 +993,7 @@
 	struct cx231xx *dev = fh->dev;
 	int rc;
 	struct cx231xx_fmt *fmt;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
 	rc = check_dev(dev);
 	if (rc < 0)
@@ -1026,7 +1027,9 @@
 	dev->format = fmt;
 	get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
 
-	call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 
 	/* Set the correct alternate setting for this resolution */
 	cx231xx_resolution_set(dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 022b480..2bf44ef 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -1113,7 +1113,6 @@
 void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
 {
 	int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-	int temporal = p->video_temporal_filter;
 
 	/* Stream */
 	printk(KERN_INFO "%s: Stream: %s",
@@ -1179,14 +1178,11 @@
 		    V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE),
 		p->video_spatial_filter);
 
-	if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480))
-		temporal = 0;
-
 	printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
 		prefix,
 		cx2341x_menu_item(p,
 			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE),
-		temporal);
+		p->video_temporal_filter);
 	printk(KERN_INFO
 		"%s: Median Filter:   %s, Luma [%d, %d], Chroma [%d, %d]\n",
 		prefix,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 9e14608..0a199d7 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -991,6 +991,8 @@
 	ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
 					&dev->pci->dev, adapter_nr, 0,
 					cx23885_dvb_fe_ioctl_override);
+	if (!ret)
+		return ret;
 
 	/* init CI & MAC */
 	switch (dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 4172cb3..d4746e0 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -365,7 +365,17 @@
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&bus->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and the IR receiver device only
+		 * replies to reads.
+		 */
+		if (i2c_smbus_xfer(&bus->i2c_adap, addr_list[0], 0,
+				   I2C_SMBUS_READ, 0, I2C_SMBUS_QUICK,
+				   NULL) >= 0) {
+			info.addr = addr_list[0];
+			i2c_new_device(&bus->i2c_adap, &info);
+		}
 	}
 
 	return bus->i2c_rc;
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 8d306d8..5de6ba9 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -5,7 +5,7 @@
  *
  *  Most of this file is
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  However, the cx23885_input_{init,fini} functions contained herein are
  *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
diff --git a/drivers/media/video/cx23885/cx23885-input.h b/drivers/media/video/cx23885/cx23885-input.h
index 3572cb1..75ef15d 100644
--- a/drivers/media/video/cx23885/cx23885-input.h
+++ b/drivers/media/video/cx23885/cx23885-input.h
@@ -3,7 +3,7 @@
  *
  *  Infrared remote control input device
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.c b/drivers/media/video/cx23885/cx23885-ioctl.c
index dfb4627..44812ca 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.c
+++ b/drivers/media/video/cx23885/cx23885-ioctl.c
@@ -3,7 +3,7 @@
  *
  *  Various common ioctl() support functions
  *
- *  Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.h b/drivers/media/video/cx23885/cx23885-ioctl.h
index 80b0f49..315be0c 100644
--- a/drivers/media/video/cx23885/cx23885-ioctl.h
+++ b/drivers/media/video/cx23885/cx23885-ioctl.h
@@ -3,7 +3,7 @@
  *
  *  Various common ioctl() support functions
  *
- *  Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c
index 6ae982cc..9a677eb 100644
--- a/drivers/media/video/cx23885/cx23885-ir.c
+++ b/drivers/media/video/cx23885/cx23885-ir.c
@@ -3,7 +3,7 @@
  *
  *  Infrared device support routines - non-input, non-vl42_subdev routines
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-ir.h b/drivers/media/video/cx23885/cx23885-ir.h
index 9b8a6d5..0c9d8bd 100644
--- a/drivers/media/video/cx23885/cx23885-ir.h
+++ b/drivers/media/video/cx23885/cx23885-ir.h
@@ -3,7 +3,7 @@
  *
  *  Infrared device support routines - non-input, non-vl42_subdev routines
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 543b854..4e44dcd 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -976,6 +976,7 @@
 {
 	struct cx23885_fh *fh = priv;
 	struct cx23885_dev *dev  = ((struct cx23885_fh *)priv)->dev;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int err;
 
 	dprintk(2, "%s()\n", __func__);
@@ -989,7 +990,9 @@
 	fh->vidq.field = f->fmt.pix.field;
 	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__,
 		fh->width, fh->height, fh->vidq.field);
-	call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 	return 0;
 }
 
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index ad728d7..f63d378 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -3,7 +3,7 @@
  *
  *  CX23888 Integrated Consumer Infrared Controller
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx23885/cx23888-ir.h b/drivers/media/video/cx23885/cx23888-ir.h
index 3d446f9..d2de41c 100644
--- a/drivers/media/video/cx23885/cx23888-ir.h
+++ b/drivers/media/video/cx23885/cx23888-ir.h
@@ -3,7 +3,7 @@
  *
  *  CX23888 Integrated Consumer Infrared Controller
  *
- *  Copyright (C) 2009  Andy Walls <awalls@radix.net>
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 8b6fb35..bb4872b 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1014,75 +1014,59 @@
 
 /* ----------------------------------------------------------------------- */
 
-static int cx25840_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		return cx25840_g_sliced_fmt(sd, &fmt->fmt.sliced);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int cx25840_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
 	struct cx25840_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct v4l2_pix_format *pix;
 	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
 	int is_50Hz = !(state->std & V4L2_STD_525_60);
 
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		pix = &(fmt->fmt.pix);
-
-		Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
-		Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
-
-		Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
-		Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
-
-		Vlines = pix->height + (is_50Hz ? 4 : 7);
-
-		if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
-		    (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
-			v4l_err(client, "%dx%d is not a valid size!\n",
-				    pix->width, pix->height);
-			return -ERANGE;
-		}
-
-		HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20);
-		VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
-		VSC &= 0x1fff;
-
-		if (pix->width >= 385)
-			filter = 0;
-		else if (pix->width > 192)
-			filter = 1;
-		else if (pix->width > 96)
-			filter = 2;
-		else
-			filter = 3;
-
-		v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale  %ux%u\n",
-			    pix->width, pix->height, HSC, VSC);
-
-		/* HSCALE=HSC */
-		cx25840_write(client, 0x418, HSC & 0xff);
-		cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
-		cx25840_write(client, 0x41a, HSC >> 16);
-		/* VSCALE=VSC */
-		cx25840_write(client, 0x41c, VSC & 0xff);
-		cx25840_write(client, 0x41d, VSC >> 8);
-		/* VS_INTRLACE=1 VFILT=filter */
-		cx25840_write(client, 0x41e, 0x8 | filter);
-		break;
-
-	default:
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
 		return -EINVAL;
+
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+	Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+
+	Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+	Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+
+	Vlines = fmt->height + (is_50Hz ? 4 : 7);
+
+	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
+			(Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
+		v4l_err(client, "%dx%d is not a valid size!\n",
+				fmt->width, fmt->height);
+		return -ERANGE;
 	}
 
+	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
+	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
+	VSC &= 0x1fff;
+
+	if (fmt->width >= 385)
+		filter = 0;
+	else if (fmt->width > 192)
+		filter = 1;
+	else if (fmt->width > 96)
+		filter = 2;
+	else
+		filter = 3;
+
+	v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale  %ux%u\n",
+			fmt->width, fmt->height, HSC, VSC);
+
+	/* HSCALE=HSC */
+	cx25840_write(client, 0x418, HSC & 0xff);
+	cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
+	cx25840_write(client, 0x41a, HSC >> 16);
+	/* VSCALE=VSC */
+	cx25840_write(client, 0x41c, VSC & 0xff);
+	cx25840_write(client, 0x41d, VSC >> 8);
+	/* VS_INTRLACE=1 VFILT=filter */
+	cx25840_write(client, 0x41e, 0x8 | filter);
 	return 0;
 }
 
@@ -1627,8 +1611,7 @@
 
 static const struct v4l2_subdev_video_ops cx25840_video_ops = {
 	.s_routing = cx25840_s_video_routing,
-	.g_fmt = cx25840_g_fmt,
-	.s_fmt = cx25840_s_fmt,
+	.s_mbus_fmt = cx25840_s_mbus_fmt,
 	.s_stream = cx25840_s_stream,
 };
 
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index ee1ca39..fb39f11 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -188,10 +188,24 @@
 			0x18, 0x6b, 0x71,
 			I2C_CLIENT_END
 		};
+		const unsigned short *addrp;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-		i2c_new_probed_device(&core->i2c_adap, &info, addr_list);
+		/*
+		 * We can't call i2c_new_probed_device() because it uses
+		 * quick writes for probing and at least some R receiver
+		 * devices only reply to reads.
+		 */
+		for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+			if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+					   I2C_SMBUS_READ, 0,
+					   I2C_SMBUS_QUICK, NULL) >= 0) {
+				info.addr = *addrp;
+				i2c_new_device(&core->i2c_adap, &info);
+				break;
+			}
+		}
 	}
 	return core->i2c_rc;
 }
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 331e1ca..44c63cbd 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1186,8 +1186,7 @@
 	mutex_lock(&em28xx_devlist_mutex);
 	list_add_tail(&ops->next, &em28xx_extension_devlist);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
-		if (dev)
-			ops->init(dev);
+		ops->init(dev);
 	}
 	printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
 	mutex_unlock(&em28xx_devlist_mutex);
@@ -1201,10 +1200,8 @@
 
 	mutex_lock(&em28xx_devlist_mutex);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
-		if (dev)
-			ops->fini(dev);
+		ops->fini(dev);
 	}
-
 	printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
 	list_del(&ops->next);
 	mutex_unlock(&em28xx_devlist_mutex);
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 785eeb4..95354a3 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1453,9 +1453,7 @@
 	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
 	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
-#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
-#endif
 	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index bb923ef..176c5b3 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -3022,16 +3022,18 @@
 /*	{USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */
 /*	{USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */
 /*	{USB_DEVICE(0x0c45, 0x60cc), BS(SN9C105, HV7131GP)}, */
+	{USB_DEVICE(0x0c45, 0x60ce), BS(SN9C105, SP80708)},
 	{USB_DEVICE(0x0c45, 0x60ec), BS(SN9C105, MO4000)},
 /*	{USB_DEVICE(0x0c45, 0x60ef), BS(SN9C105, ICM105C)}, */
 /*	{USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */
+/*	{USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */
 	{USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)},
 	{USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)},
 #endif
 	{USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)},	/*sn9c128*/
-/*	{USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, P1030xC)}, */
+/*	{USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, PO2030N)}, * / GC0305*/
 /*	{USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */
 	{USB_DEVICE(0x0c45, 0x610a), BS(SN9C120, OV7648)},	/*sn9c128*/
 	{USB_DEVICE(0x0c45, 0x610b), BS(SN9C120, OV7660)},	/*sn9c128*/
@@ -3058,6 +3060,7 @@
 	{USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)},
 	{USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)},
 	{USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)},	/*sn9c120b*/
+						/* or GC0305 / GC0307 */
 	{USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)},	/*sn9c120b*/
 	{USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)},	/*sn9c120b*/
 	{USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)},	/*sn9c120b*/
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 7cfccfd1..c338f3f 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -366,7 +366,7 @@
 
 	dev = (struct hdpvr_device *)video_get_drvdata(video_devdata(file));
 	if (!dev) {
-		v4l2_err(&dev->v4l2_dev, "open failing with with ENODEV\n");
+		pr_err("open failing with with ENODEV\n");
 		retval = -ENODEV;
 		goto err;
 	}
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index b59475bf..b588e30 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -267,13 +267,13 @@
 		if (p.video_encoding != itv->params.video_encoding) {
 			int is_mpeg1 = p.video_encoding ==
 				V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-			struct v4l2_format fmt;
+			struct v4l2_mbus_framefmt fmt;
 
 			/* fix videodecoder resolution */
-			fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-			fmt.fmt.pix.width = itv->params.width / (is_mpeg1 ? 2 : 1);
-			fmt.fmt.pix.height = itv->params.height;
-			v4l2_subdev_call(itv->sd_video, video, s_fmt, &fmt);
+			fmt.width = itv->params.width / (is_mpeg1 ? 2 : 1);
+			fmt.height = itv->params.height;
+			fmt.code = V4L2_MBUS_FMT_FIXED;
+			v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt);
 		}
 		err = cx2341x_update(itv, ivtv_api_func, &itv->params, &p);
 		if (!err && itv->params.stream_vbi_fmt != p.stream_vbi_fmt)
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index abf4109..3c2cc27 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -823,6 +823,12 @@
 
 	IVTV_DEBUG_FILE("close() of %s\n", s->name);
 
+	if (id->type == IVTV_DEC_STREAM_TYPE_YUV &&
+		test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
+		/* Restore registers we've changed & clean up any mess */
+		ivtv_yuv_close(itv);
+	}
+
 	/* Stop decoding */
 	if (test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
 		IVTV_DEBUG_INFO("close stopping decode\n");
@@ -832,10 +838,7 @@
 	}
 	clear_bit(IVTV_F_S_APPL_IO, &s->s_flags);
 	clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
-	if (id->type == IVTV_DEC_STREAM_TYPE_YUV && test_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags)) {
-		/* Restore registers we've changed & clean up any mess we've made */
-		ivtv_yuv_close(itv);
-	}
+
 	if (itv->output_mode == OUT_UDMA_YUV && id->yuv_frames)
 		itv->output_mode = OUT_NONE;
 
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index fa9f0d9..11ac2fa 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -569,6 +569,7 @@
 	struct ivtv_open_id *id = fh;
 	struct ivtv *itv = id->itv;
 	struct cx2341x_mpeg_params *p = &itv->params;
+	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret = ivtv_try_fmt_vid_cap(file, fh, fmt);
 	int w = fmt->fmt.pix.width;
 	int h = fmt->fmt.pix.height;
@@ -586,7 +587,10 @@
 	p->height = h;
 	if (p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
 		fmt->fmt.pix.width /= 2;
-	v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+	mbus_fmt.width = fmt->fmt.pix.width;
+	mbus_fmt.height = h;
+	mbus_fmt.code = V4L2_MBUS_FMT_FIXED;
+	v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &mbus_fmt);
 	return ivtv_g_fmt_vid_cap(file, fh, fmt);
 }
 
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index de4288c..a937e2f 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -618,12 +618,17 @@
 	struct ivtv *itv = s->itv;
 	struct cx2341x_mpeg_params *p = &itv->params;
 	int datatype;
+	u16 width;
+	u16 height;
 
 	if (s->vdev == NULL)
 		return -EINVAL;
 
 	IVTV_DEBUG_INFO("Setting some initial decoder settings\n");
 
+	width = p->width;
+	height = p->height;
+
 	/* set audio mode to left/stereo  for dual/stereo mode. */
 	ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
 
@@ -646,7 +651,14 @@
 	   2 = yuv_from_host */
 	switch (s->type) {
 	case IVTV_DEC_STREAM_TYPE_YUV:
-		datatype = itv->output_mode == OUT_PASSTHROUGH ? 1 : 2;
+		if (itv->output_mode == OUT_PASSTHROUGH) {
+			datatype = 1;
+		} else {
+			/* Fake size to avoid switching video standard */
+			datatype = 2;
+			width = 720;
+			height = itv->is_out_50hz ? 576 : 480;
+		}
 		IVTV_DEBUG_INFO("Setup DEC YUV Stream data[0] = %d\n", datatype);
 		break;
 	case IVTV_DEC_STREAM_TYPE_MPG:
@@ -655,9 +667,13 @@
 		break;
 	}
 	if (ivtv_vapi(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, datatype,
-			p->width, p->height, p->audio_properties)) {
+			width, height, p->audio_properties)) {
 		IVTV_DEBUG_WARN("Couldn't initialize decoder source\n");
 	}
+
+	/* Decoder sometimes dies here, so wait a moment */
+	ivtv_msleep_timeout(10, 0);
+
 	return 0;
 }
 
@@ -697,6 +713,9 @@
 	/* start playback */
 	ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, gop_offset, 0);
 
+	/* Let things settle before we actually start */
+	ivtv_msleep_timeout(10, 0);
+
 	/* Clear the following Interrupt mask bits for decoding */
 	ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_DECODE);
 	IVTV_DEBUG_IRQ("IRQ Mask is now: 0x%08x\n", itv->irqmask);
@@ -893,6 +912,9 @@
 	clear_bit(IVTV_F_S_STREAMING, &s->s_flags);
 	ivtv_flush_queues(s);
 
+	/* decoder needs time to settle */
+	ivtv_msleep_timeout(40, 0);
+
 	/* decrement decoding */
 	atomic_dec(&itv->decoding);
 
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 49e1a28..9ff3425 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -1066,7 +1066,11 @@
 	}
 	mutex_unlock(&itv->serialize_lock);
 
-	ivtvfb_get_framebuffer(itv, &oi->video_rbase, &oi->video_buffer_size);
+	if (ivtvfb_get_framebuffer(itv, &oi->video_rbase,
+					&oi->video_buffer_size) < 0) {
+		IVTVFB_ERR("Firmware failed to respond\n");
+		return -EIO;
+	}
 
 	/* The osd buffer size depends on the number of video buffers allocated
 	   on the PVR350 itself. For now we'll hardcode the smallest osd buffer
@@ -1158,8 +1162,11 @@
 	}
 
 	/* Find & setup the OSD buffer */
-	if ((rc = ivtvfb_init_io(itv)))
+	rc = ivtvfb_init_io(itv);
+	if (rc) {
+		ivtvfb_release_buffers(itv);
 		return rc;
+	}
 
 	/* Set the startup video mode information */
 	if ((rc = ivtvfb_init_vidmode(itv))) {
@@ -1210,6 +1217,7 @@
 {
 	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
 	struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev);
+	struct osd_info *oi = itv->osd_info;
 
 	if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) {
 		if (unregister_framebuffer(&itv->osd_info->ivtvfb_info)) {
@@ -1218,7 +1226,7 @@
 			return 0;
 		}
 		IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance);
-		ivtvfb_blank(FB_BLANK_POWERDOWN, &itv->osd_info->ivtvfb_info);
+		ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info);
 		ivtvfb_release_buffers(itv);
 		itv->osd_video_pbase = 0;
 	}
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 554eaf1..10ddecc 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -988,6 +988,9 @@
 		goto err_m2m;
 	}
 
+	q_data[V4L2_M2M_SRC].fmt = &formats[0];
+	q_data[V4L2_M2M_DST].fmt = &formats[0];
+
 	return 0;
 
 err_m2m:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index e3b9a8a..79f096d 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -701,13 +701,13 @@
 #endif
 };
 
-static int mt9m001_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	struct i2c_client *client = sd->priv;
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
 
-	if ((unsigned int)index >= mt9m001->num_fmts)
+	if (index >= mt9m001->num_fmts)
 		return -EINVAL;
 
 	*code = mt9m001->fmts[index].code;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index e42162c..fbd0fc7 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -999,10 +999,10 @@
 #endif
 };
 
-static int mt9m111_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9m111_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(mt9m111_colour_fmts))
+	if (index >= ARRAY_SIZE(mt9m111_colour_fmts))
 		return -EINVAL;
 
 	*code = mt9m111_colour_fmts[index].code;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 9f5ff25..a9a28b2 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -798,7 +798,7 @@
 #endif
 };
 
-static int mt9t031_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index aa4fce9..e4bf1db 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -1017,10 +1017,10 @@
 	return 0;
 }
 
-static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9t112_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
+	if (index >= ARRAY_SIZE(mt9t112_cfmts))
 		return -EINVAL;
 
 	*code = mt9t112_cfmts[index].code;
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 72e55be..f5e778d 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -392,27 +392,25 @@
 	return 0;
 }
 
-static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
+					enum v4l2_mbus_pixelcode *code)
 {
-	if (fmt->index > 0)
+	if (index > 0)
 		return -EINVAL;
 
-	fmt->flags = 0;
-	strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
-	fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
-
+	*code = V4L2_MBUS_FMT_SGRBG8_1X8;
 	return 0;
 }
 
-static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-
-	if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+	if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8)
 		return -EINVAL;
 
-	v4l_bound_align_image(&pix->width, 48, 639, 1,
-			      &pix->height, 32, 480, 1, 0);
+	v4l_bound_align_image(&fmt->width, 48, 639, 1,
+			      &fmt->height, 32, 480, 1, 0);
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
 
 	return 0;
 }
@@ -455,18 +453,17 @@
 	return 0;
 }
 
-static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
 	struct mt9v011 *core = to_mt9v011(sd);
 	int rc;
 
-	rc = mt9v011_try_fmt(sd, fmt);
+	rc = mt9v011_try_mbus_fmt(sd, fmt);
 	if (rc < 0)
 		return -EINVAL;
 
-	core->width = pix->width;
-	core->height = pix->height;
+	core->width = fmt->width;
+	core->height = fmt->height;
 
 	set_res(sd);
 
@@ -549,9 +546,9 @@
 };
 
 static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
-	.enum_fmt = mt9v011_enum_fmt,
-	.try_fmt = mt9v011_try_fmt,
-	.s_fmt = mt9v011_s_fmt,
+	.enum_mbus_fmt = mt9v011_enum_mbus_fmt,
+	.try_mbus_fmt = mt9v011_try_mbus_fmt,
+	.s_mbus_fmt = mt9v011_s_mbus_fmt,
 	.g_parm = mt9v011_g_parm,
 	.s_parm = mt9v011_s_parm,
 };
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index fb44ff0..e7cd23c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -838,13 +838,13 @@
 #endif
 };
 
-static int mt9v022_enum_fmt(struct v4l2_subdev *sd, int index,
+static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			    enum v4l2_mbus_pixelcode *code)
 {
 	struct i2c_client *client = sd->priv;
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
 
-	if ((unsigned int)index >= mt9v022->num_fmts)
+	if (index >= mt9v022->num_fmts)
 		return -EINVAL;
 
 	*code = mt9v022->fmts[index].code;
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
new file mode 100644
index 0000000..026bef0
--- /dev/null
+++ b/drivers/media/video/mx2_camera.c
@@ -0,0 +1,1513 @@
+/*
+ * V4L2 Driver for i.MX27/i.MX25 camera host
+ *
+ * Copyright (C) 2008, Sascha Hauer, Pengutronix
+ * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+
+#include <linux/videodev2.h>
+
+#include <mach/mx2_cam.h>
+#ifdef CONFIG_MACH_MX27
+#include <mach/dma-mx1-mx2.h>
+#endif
+#include <mach/hardware.h>
+
+#include <asm/dma.h>
+
+#define MX2_CAM_DRV_NAME "mx2-camera"
+#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
+
+/* reset values */
+#define CSICR1_RESET_VAL	0x40000800
+#define CSICR2_RESET_VAL	0x0
+#define CSICR3_RESET_VAL	0x0
+
+/* csi control reg 1 */
+#define CSICR1_SWAP16_EN	(1 << 31)
+#define CSICR1_EXT_VSYNC	(1 << 30)
+#define CSICR1_EOF_INTEN	(1 << 29)
+#define CSICR1_PRP_IF_EN	(1 << 28)
+#define CSICR1_CCIR_MODE	(1 << 27)
+#define CSICR1_COF_INTEN	(1 << 26)
+#define CSICR1_SF_OR_INTEN	(1 << 25)
+#define CSICR1_RF_OR_INTEN	(1 << 24)
+#define CSICR1_STATFF_LEVEL	(3 << 22)
+#define CSICR1_STATFF_INTEN	(1 << 21)
+#define CSICR1_RXFF_LEVEL(l)	(((l) & 3) << 19)	/* MX27 */
+#define CSICR1_FB2_DMA_INTEN	(1 << 20)		/* MX25 */
+#define CSICR1_FB1_DMA_INTEN	(1 << 19)		/* MX25 */
+#define CSICR1_RXFF_INTEN	(1 << 18)
+#define CSICR1_SOF_POL		(1 << 17)
+#define CSICR1_SOF_INTEN	(1 << 16)
+#define CSICR1_MCLKDIV(d)	(((d) & 0xF) << 12)
+#define CSICR1_HSYNC_POL	(1 << 11)
+#define CSICR1_CCIR_EN		(1 << 10)
+#define CSICR1_MCLKEN		(1 << 9)
+#define CSICR1_FCC		(1 << 8)
+#define CSICR1_PACK_DIR		(1 << 7)
+#define CSICR1_CLR_STATFIFO	(1 << 6)
+#define CSICR1_CLR_RXFIFO	(1 << 5)
+#define CSICR1_GCLK_MODE	(1 << 4)
+#define CSICR1_INV_DATA		(1 << 3)
+#define CSICR1_INV_PCLK		(1 << 2)
+#define CSICR1_REDGE		(1 << 1)
+
+#define SHIFT_STATFF_LEVEL	22
+#define SHIFT_RXFF_LEVEL	19
+#define SHIFT_MCLKDIV		12
+
+/* control reg 3 */
+#define CSICR3_FRMCNT		(0xFFFF << 16)
+#define CSICR3_FRMCNT_RST	(1 << 15)
+#define CSICR3_DMA_REFLASH_RFF	(1 << 14)
+#define CSICR3_DMA_REFLASH_SFF	(1 << 13)
+#define CSICR3_DMA_REQ_EN_RFF	(1 << 12)
+#define CSICR3_DMA_REQ_EN_SFF	(1 << 11)
+#define CSICR3_RXFF_LEVEL(l)	(((l) & 7) << 4)	/* MX25 */
+#define CSICR3_CSI_SUP		(1 << 3)
+#define CSICR3_ZERO_PACK_EN	(1 << 2)
+#define CSICR3_ECC_INT_EN	(1 << 1)
+#define CSICR3_ECC_AUTO_EN	(1 << 0)
+
+#define SHIFT_FRMCNT		16
+
+/* csi status reg */
+#define CSISR_SFF_OR_INT	(1 << 25)
+#define CSISR_RFF_OR_INT	(1 << 24)
+#define CSISR_STATFF_INT	(1 << 21)
+#define CSISR_DMA_TSF_FB2_INT	(1 << 20)	/* MX25 */
+#define CSISR_DMA_TSF_FB1_INT	(1 << 19)	/* MX25 */
+#define CSISR_RXFF_INT		(1 << 18)
+#define CSISR_EOF_INT		(1 << 17)
+#define CSISR_SOF_INT		(1 << 16)
+#define CSISR_F2_INT		(1 << 15)
+#define CSISR_F1_INT		(1 << 14)
+#define CSISR_COF_INT		(1 << 13)
+#define CSISR_ECC_INT		(1 << 1)
+#define CSISR_DRDY		(1 << 0)
+
+#define CSICR1			0x00
+#define CSICR2			0x04
+#define CSISR			(cpu_is_mx27() ? 0x08 : 0x18)
+#define CSISTATFIFO		0x0c
+#define CSIRFIFO		0x10
+#define CSIRXCNT		0x14
+#define CSICR3			(cpu_is_mx27() ? 0x1C : 0x08)
+#define CSIDMASA_STATFIFO	0x20
+#define CSIDMATA_STATFIFO	0x24
+#define CSIDMASA_FB1		0x28
+#define CSIDMASA_FB2		0x2c
+#define CSIFBUF_PARA		0x30
+#define CSIIMAG_PARA		0x34
+
+/* EMMA PrP */
+#define PRP_CNTL			0x00
+#define PRP_INTR_CNTL			0x04
+#define PRP_INTRSTATUS			0x08
+#define PRP_SOURCE_Y_PTR		0x0c
+#define PRP_SOURCE_CB_PTR		0x10
+#define PRP_SOURCE_CR_PTR		0x14
+#define PRP_DEST_RGB1_PTR		0x18
+#define PRP_DEST_RGB2_PTR		0x1c
+#define PRP_DEST_Y_PTR			0x20
+#define PRP_DEST_CB_PTR			0x24
+#define PRP_DEST_CR_PTR			0x28
+#define PRP_SRC_FRAME_SIZE		0x2c
+#define PRP_DEST_CH1_LINE_STRIDE	0x30
+#define PRP_SRC_PIXEL_FORMAT_CNTL	0x34
+#define PRP_CH1_PIXEL_FORMAT_CNTL	0x38
+#define PRP_CH1_OUT_IMAGE_SIZE		0x3c
+#define PRP_CH2_OUT_IMAGE_SIZE		0x40
+#define PRP_SRC_LINE_STRIDE		0x44
+#define PRP_CSC_COEF_012		0x48
+#define PRP_CSC_COEF_345		0x4c
+#define PRP_CSC_COEF_678		0x50
+#define PRP_CH1_RZ_HORI_COEF1		0x54
+#define PRP_CH1_RZ_HORI_COEF2		0x58
+#define PRP_CH1_RZ_HORI_VALID		0x5c
+#define PRP_CH1_RZ_VERT_COEF1		0x60
+#define PRP_CH1_RZ_VERT_COEF2		0x64
+#define PRP_CH1_RZ_VERT_VALID		0x68
+#define PRP_CH2_RZ_HORI_COEF1		0x6c
+#define PRP_CH2_RZ_HORI_COEF2		0x70
+#define PRP_CH2_RZ_HORI_VALID		0x74
+#define PRP_CH2_RZ_VERT_COEF1		0x78
+#define PRP_CH2_RZ_VERT_COEF2		0x7c
+#define PRP_CH2_RZ_VERT_VALID		0x80
+
+#define PRP_CNTL_CH1EN		(1 << 0)
+#define PRP_CNTL_CH2EN		(1 << 1)
+#define PRP_CNTL_CSIEN		(1 << 2)
+#define PRP_CNTL_DATA_IN_YUV420	(0 << 3)
+#define PRP_CNTL_DATA_IN_YUV422	(1 << 3)
+#define PRP_CNTL_DATA_IN_RGB16	(2 << 3)
+#define PRP_CNTL_DATA_IN_RGB32	(3 << 3)
+#define PRP_CNTL_CH1_OUT_RGB8	(0 << 5)
+#define PRP_CNTL_CH1_OUT_RGB16	(1 << 5)
+#define PRP_CNTL_CH1_OUT_RGB32	(2 << 5)
+#define PRP_CNTL_CH1_OUT_YUV422	(3 << 5)
+#define PRP_CNTL_CH2_OUT_YUV420	(0 << 7)
+#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
+#define PRP_CNTL_CH2_OUT_YUV444	(2 << 7)
+#define PRP_CNTL_CH1_LEN	(1 << 9)
+#define PRP_CNTL_CH2_LEN	(1 << 10)
+#define PRP_CNTL_SKIP_FRAME	(1 << 11)
+#define PRP_CNTL_SWRST		(1 << 12)
+#define PRP_CNTL_CLKEN		(1 << 13)
+#define PRP_CNTL_WEN		(1 << 14)
+#define PRP_CNTL_CH1BYP		(1 << 15)
+#define PRP_CNTL_IN_TSKIP(x)	((x) << 16)
+#define PRP_CNTL_CH1_TSKIP(x)	((x) << 19)
+#define PRP_CNTL_CH2_TSKIP(x)	((x) << 22)
+#define PRP_CNTL_INPUT_FIFO_LEVEL(x)	((x) << 25)
+#define PRP_CNTL_RZ_FIFO_LEVEL(x)	((x) << 27)
+#define PRP_CNTL_CH2B1EN	(1 << 29)
+#define PRP_CNTL_CH2B2EN	(1 << 30)
+#define PRP_CNTL_CH2FEN		(1 << 31)
+
+/* IRQ Enable and status register */
+#define PRP_INTR_RDERR		(1 << 0)
+#define PRP_INTR_CH1WERR	(1 << 1)
+#define PRP_INTR_CH2WERR	(1 << 2)
+#define PRP_INTR_CH1FC		(1 << 3)
+#define PRP_INTR_CH2FC		(1 << 5)
+#define PRP_INTR_LBOVF		(1 << 7)
+#define PRP_INTR_CH2OVF		(1 << 8)
+
+#define mx27_camera_emma(pcdev)	(cpu_is_mx27() && pcdev->use_emma)
+
+#define MAX_VIDEO_MEM	16
+
+struct mx2_camera_dev {
+	struct device		*dev;
+	struct soc_camera_host	soc_host;
+	struct soc_camera_device *icd;
+	struct clk		*clk_csi, *clk_emma;
+
+	unsigned int		irq_csi, irq_emma;
+	void __iomem		*base_csi, *base_emma;
+	unsigned long		base_dma;
+
+	struct mx2_camera_platform_data *pdata;
+	struct resource		*res_csi, *res_emma;
+	unsigned long		platform_flags;
+
+	struct list_head	capture;
+	struct list_head	active_bufs;
+
+	spinlock_t		lock;
+
+	int			dma;
+	struct mx2_buffer	*active;
+	struct mx2_buffer	*fb1_active;
+	struct mx2_buffer	*fb2_active;
+
+	int			use_emma;
+
+	u32			csicr1;
+
+	void			*discard_buffer;
+	dma_addr_t		discard_buffer_dma;
+	size_t			discard_size;
+};
+
+/* buffer for one video frame */
+struct mx2_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer		vb;
+
+	enum v4l2_mbus_pixelcode	code;
+
+	int bufnum;
+};
+
+static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
+{
+	unsigned long flags;
+
+	clk_disable(pcdev->clk_csi);
+	writel(0, pcdev->base_csi + CSICR1);
+	if (mx27_camera_emma(pcdev)) {
+		writel(0, pcdev->base_emma + PRP_CNTL);
+	} else if (cpu_is_mx25()) {
+		spin_lock_irqsave(&pcdev->lock, flags);
+		pcdev->fb1_active = NULL;
+		pcdev->fb2_active = NULL;
+		writel(0, pcdev->base_csi + CSIDMASA_FB1);
+		writel(0, pcdev->base_csi + CSIDMASA_FB2);
+		spin_unlock_irqrestore(&pcdev->lock, flags);
+	}
+}
+
+/*
+ * The following two functions absolutely depend on the fact, that
+ * there can be only one camera on mx2 camera sensor interface
+ */
+static int mx2_camera_add_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	int ret;
+	u32 csicr1;
+
+	if (pcdev->icd)
+		return -EBUSY;
+
+	ret = clk_enable(pcdev->clk_csi);
+	if (ret < 0)
+		return ret;
+
+	csicr1 = CSICR1_MCLKEN;
+
+	if (mx27_camera_emma(pcdev)) {
+		csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
+			CSICR1_RXFF_LEVEL(0);
+	} else if (cpu_is_mx27())
+		csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2);
+
+	pcdev->csicr1 = csicr1;
+	writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+	pcdev->icd = icd;
+
+	dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
+		 icd->devnum);
+
+	return 0;
+}
+
+static void mx2_camera_remove_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	BUG_ON(icd != pcdev->icd);
+
+	dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
+		 icd->devnum);
+
+	mx2_camera_deactivate(pcdev);
+
+	if (pcdev->discard_buffer) {
+		dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size,
+				pcdev->discard_buffer,
+				pcdev->discard_buffer_dma);
+		pcdev->discard_buffer = NULL;
+	}
+
+	pcdev->icd = NULL;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev)
+{
+	u32 tmp;
+
+	imx_dma_enable(pcdev->dma);
+
+	tmp = readl(pcdev->base_csi + CSICR1);
+	tmp |= CSICR1_RF_OR_INTEN;
+	writel(tmp, pcdev->base_csi + CSICR1);
+}
+
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	u32 status = readl(pcdev->base_csi + CSISR);
+
+	if (status & CSISR_SOF_INT && pcdev->active) {
+		u32 tmp;
+
+		tmp = readl(pcdev->base_csi + CSICR1);
+		writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1);
+		mx27_camera_dma_enable(pcdev);
+	}
+
+	writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
+
+	return IRQ_HANDLED;
+}
+#else
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+	return IRQ_NONE;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb,
+		int state)
+{
+	struct videobuf_buffer *vb;
+	struct mx2_buffer *buf;
+	struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active :
+		&pcdev->fb2_active;
+	u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	vb = &(*fb_active)->vb;
+	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	vb->state = state;
+	do_gettimeofday(&vb->ts);
+	vb->field_count++;
+
+	wake_up(&vb->done);
+
+	if (list_empty(&pcdev->capture)) {
+		buf = NULL;
+		writel(0, pcdev->base_csi + fb_reg);
+	} else {
+		buf = list_entry(pcdev->capture.next, struct mx2_buffer,
+				vb.queue);
+		vb = &buf->vb;
+		list_del(&vb->queue);
+		vb->state = VIDEOBUF_ACTIVE;
+		writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg);
+	}
+
+	*fb_active = buf;
+
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	u32 status = readl(pcdev->base_csi + CSISR);
+
+	if (status & CSISR_DMA_TSF_FB1_INT)
+		mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE);
+	else if (status & CSISR_DMA_TSF_FB2_INT)
+		mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE);
+
+	/* FIXME: handle CSISR_RFF_OR_INT */
+
+	writel(status, pcdev->base_csi + CSISR);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  Videobuf operations
+ */
+static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
+			      unsigned int *size)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+
+	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	*size = bytes_per_line * icd->user_height;
+
+	if (0 == *count)
+		*count = 32;
+	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
+		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
+
+	return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct videobuf_buffer *vb = &buf->vb;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	/*
+	 * This waits until this buffer is out of danger, i.e., until it is no
+	 * longer in STATE_QUEUED or STATE_ACTIVE
+	 */
+	videobuf_waiton(vb, 0, 0);
+
+	videobuf_dma_contig_free(vq, vb);
+	dev_dbg(&icd->dev, "%s freed\n", __func__);
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int mx2_videobuf_prepare(struct videobuf_queue *vq,
+		struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+	int ret = 0;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+#ifdef DEBUG
+	/*
+	 * This can be useful if you want to see if we actually fill
+	 * the buffer with something
+	 */
+	memset((void *)vb->baddr, 0xaa, vb->bsize);
+#endif
+
+	if (buf->code	!= icd->current_fmt->code ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
+	    vb->field	!= field) {
+		buf->code	= icd->current_fmt->code;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
+		vb->field	= field;
+		vb->state	= VIDEOBUF_NEEDS_INIT;
+	}
+
+	vb->size = bytes_per_line * vb->height;
+	if (vb->baddr && vb->bsize < vb->size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		ret = videobuf_iolock(vq, vb, NULL);
+		if (ret)
+			goto fail;
+
+		vb->state = VIDEOBUF_PREPARED;
+	}
+
+	return 0;
+
+fail:
+	free_buffer(vq, buf);
+out:
+	return ret;
+}
+
+static void mx2_videobuf_queue(struct videobuf_queue *vq,
+			       struct videobuf_buffer *vb)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	unsigned long flags;
+
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	vb->state = VIDEOBUF_QUEUED;
+	list_add_tail(&vb->queue, &pcdev->capture);
+
+	if (mx27_camera_emma(pcdev)) {
+		goto out;
+#ifdef CONFIG_MACH_MX27
+	} else if (cpu_is_mx27()) {
+		int ret;
+
+		if (pcdev->active == NULL) {
+			ret = imx_dma_setup_single(pcdev->dma,
+					videobuf_to_dma_contig(vb), vb->size,
+					(u32)pcdev->base_dma + 0x10,
+					DMA_MODE_READ);
+			if (ret) {
+				vb->state = VIDEOBUF_ERROR;
+				wake_up(&vb->done);
+				goto out;
+			}
+
+			vb->state = VIDEOBUF_ACTIVE;
+			pcdev->active = buf;
+		}
+#endif
+	} else { /* cpu_is_mx25() */
+		u32 csicr3, dma_inten = 0;
+
+		if (pcdev->fb1_active == NULL) {
+			writel(videobuf_to_dma_contig(vb),
+					pcdev->base_csi + CSIDMASA_FB1);
+			pcdev->fb1_active = buf;
+			dma_inten = CSICR1_FB1_DMA_INTEN;
+		} else if (pcdev->fb2_active == NULL) {
+			writel(videobuf_to_dma_contig(vb),
+					pcdev->base_csi + CSIDMASA_FB2);
+			pcdev->fb2_active = buf;
+			dma_inten = CSICR1_FB2_DMA_INTEN;
+		}
+
+		if (dma_inten) {
+			list_del(&vb->queue);
+			vb->state = VIDEOBUF_ACTIVE;
+
+			csicr3 = readl(pcdev->base_csi + CSICR3);
+
+			/* Reflash DMA */
+			writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
+					pcdev->base_csi + CSICR3);
+
+			/* clear & enable interrupts */
+			writel(dma_inten, pcdev->base_csi + CSISR);
+			pcdev->csicr1 |= dma_inten;
+			writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+			/* enable DMA */
+			csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
+			writel(csicr3, pcdev->base_csi + CSICR3);
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx2_videobuf_release(struct videobuf_queue *vq,
+				 struct videobuf_buffer *vb)
+{
+	struct soc_camera_device *icd = vq->priv_data;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
+	unsigned long flags;
+
+#ifdef DEBUG
+	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	switch (vb->state) {
+	case VIDEOBUF_ACTIVE:
+		dev_info(&icd->dev, "%s (active)\n", __func__);
+		break;
+	case VIDEOBUF_QUEUED:
+		dev_info(&icd->dev, "%s (queued)\n", __func__);
+		break;
+	case VIDEOBUF_PREPARED:
+		dev_info(&icd->dev, "%s (prepared)\n", __func__);
+		break;
+	default:
+		dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+				vb->state);
+		break;
+	}
+#endif
+
+	/*
+	 * Terminate only queued but inactive buffers. Active buffers are
+	 * released when they become inactive after videobuf_waiton().
+	 *
+	 * FIXME: implement forced termination of active buffers, so that the
+	 * user won't get stuck in an uninterruptible state. This requires a
+	 * specific handling for each of the three DMA types that this driver
+	 * supports.
+	 */
+	spin_lock_irqsave(&pcdev->lock, flags);
+	if (vb->state == VIDEOBUF_QUEUED) {
+		list_del(&vb->queue);
+		vb->state = VIDEOBUF_ERROR;
+	}
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+
+	free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops mx2_videobuf_ops = {
+	.buf_setup      = mx2_videobuf_setup,
+	.buf_prepare    = mx2_videobuf_prepare,
+	.buf_queue      = mx2_videobuf_queue,
+	.buf_release    = mx2_videobuf_release,
+};
+
+static void mx2_camera_init_videobuf(struct videobuf_queue *q,
+			      struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
+			&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd);
+}
+
+#define MX2_BUS_FLAGS	(SOCAM_DATAWIDTH_8 | \
+			SOCAM_MASTER | \
+			SOCAM_VSYNC_ACTIVE_HIGH | \
+			SOCAM_VSYNC_ACTIVE_LOW | \
+			SOCAM_HSYNC_ACTIVE_HIGH | \
+			SOCAM_HSYNC_ACTIVE_LOW | \
+			SOCAM_PCLK_SAMPLE_RISING | \
+			SOCAM_PCLK_SAMPLE_FALLING | \
+			SOCAM_DATA_ACTIVE_HIGH | \
+			SOCAM_DATA_ACTIVE_LOW)
+
+static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
+{
+	u32 cntl;
+	int count = 0;
+
+	cntl = readl(pcdev->base_emma + PRP_CNTL);
+	writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
+	while (count++ < 100) {
+		if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST))
+			return 0;
+		barrier();
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
+		int bytesperline)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+
+	writel(pcdev->discard_buffer_dma,
+			pcdev->base_emma + PRP_DEST_RGB1_PTR);
+	writel(pcdev->discard_buffer_dma,
+			pcdev->base_emma + PRP_DEST_RGB2_PTR);
+
+	/*
+	 * We only use the EMMA engine to get rid of the broken
+	 * DMA Engine. No color space consversion at the moment.
+	 * We adjust incoming and outgoing pixelformat to rgb16
+	 * and adjust the bytesperline accordingly.
+	 */
+	writel(PRP_CNTL_CH1EN |
+			PRP_CNTL_CSIEN |
+			PRP_CNTL_DATA_IN_RGB16 |
+			PRP_CNTL_CH1_OUT_RGB16 |
+			PRP_CNTL_CH1_LEN |
+			PRP_CNTL_CH1BYP |
+			PRP_CNTL_CH1_TSKIP(0) |
+			PRP_CNTL_IN_TSKIP(0),
+			pcdev->base_emma + PRP_CNTL);
+
+	writel(((bytesperline >> 1) << 16) | icd->user_height,
+			pcdev->base_emma + PRP_SRC_FRAME_SIZE);
+	writel(((bytesperline >> 1) << 16) | icd->user_height,
+			pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
+	writel(bytesperline,
+			pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
+	writel(0x2ca00565, /* RGB565 */
+			pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
+	writel(0x2ca00565, /* RGB565 */
+			pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
+
+	/* Enable interrupts */
+	writel(PRP_INTR_RDERR |
+			PRP_INTR_CH1WERR |
+			PRP_INTR_CH2WERR |
+			PRP_INTR_CH1FC |
+			PRP_INTR_CH2FC |
+			PRP_INTR_LBOVF |
+			PRP_INTR_CH2OVF,
+			pcdev->base_emma + PRP_INTR_CNTL);
+}
+
+static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
+		__u32 pixfmt)
+{
+	struct soc_camera_host *ici =
+		to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	unsigned long camera_flags, common_flags;
+	int ret = 0;
+	int bytesperline;
+	u32 csicr1 = pcdev->csicr1;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+
+	common_flags = soc_camera_bus_param_compatible(camera_flags,
+				MX2_BUS_FLAGS);
+	if (!common_flags)
+		return -EINVAL;
+
+	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+		if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+		else
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+	}
+
+	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+		if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
+			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+		else
+			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+	}
+
+	ret = icd->ops->set_bus_param(icd, common_flags);
+	if (ret < 0)
+		return ret;
+
+	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+		csicr1 |= CSICR1_INV_PCLK;
+	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+		csicr1 |= CSICR1_SOF_POL;
+	if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+		csicr1 |= CSICR1_HSYNC_POL;
+	if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+		csicr1 |= CSICR1_SWAP16_EN;
+	if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
+		csicr1 |= CSICR1_EXT_VSYNC;
+	if (pcdev->platform_flags & MX2_CAMERA_CCIR)
+		csicr1 |= CSICR1_CCIR_EN;
+	if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE)
+		csicr1 |= CSICR1_CCIR_MODE;
+	if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK)
+		csicr1 |= CSICR1_GCLK_MODE;
+	if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
+		csicr1 |= CSICR1_INV_DATA;
+	if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+		csicr1 |= CSICR1_PACK_DIR;
+
+	pcdev->csicr1 = csicr1;
+
+	bytesperline = soc_mbus_bytes_per_line(icd->user_width,
+			icd->current_fmt->host_fmt);
+	if (bytesperline < 0)
+		return bytesperline;
+
+	if (mx27_camera_emma(pcdev)) {
+		ret = mx27_camera_emma_prp_reset(pcdev);
+		if (ret)
+			return ret;
+
+		if (pcdev->discard_buffer)
+			dma_free_coherent(ici->v4l2_dev.dev,
+				pcdev->discard_size, pcdev->discard_buffer,
+				pcdev->discard_buffer_dma);
+
+		/*
+		 * I didn't manage to properly enable/disable the prp
+		 * on a per frame basis during running transfers,
+		 * thus we allocate a buffer here and use it to
+		 * discard frames when no buffer is available.
+		 * Feel free to work on this ;)
+		 */
+		pcdev->discard_size = icd->user_height * bytesperline;
+		pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev,
+				pcdev->discard_size, &pcdev->discard_buffer_dma,
+				GFP_KERNEL);
+		if (!pcdev->discard_buffer)
+			return -ENOMEM;
+
+		mx27_camera_emma_buf_init(icd, bytesperline);
+	} else if (cpu_is_mx25()) {
+		writel((bytesperline * icd->user_height) >> 2,
+				pcdev->base_csi + CSIRXCNT);
+		writel((bytesperline << 16) | icd->user_height,
+				pcdev->base_csi + CSIIMAG_PARA);
+	}
+
+	writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+	return 0;
+}
+
+static int mx2_camera_set_crop(struct soc_camera_device *icd,
+				struct v4l2_crop *a)
+{
+	struct v4l2_rect *rect = &a->c;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
+	soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
+
+	ret = v4l2_subdev_call(sd, video, s_crop, a);
+	if (ret < 0)
+		return ret;
+
+	/* The capture device might have changed its output  */
+	ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+		mf.width, mf.height);
+
+	icd->user_width		= mf.width;
+	icd->user_height	= mf.height;
+
+	return ret;
+}
+
+static int mx2_camera_set_fmt(struct soc_camera_device *icd,
+			       struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+	if (!xlate) {
+		dev_warn(icd->dev.parent, "Format %x not found\n",
+				pix->pixelformat);
+		return -EINVAL;
+	}
+
+	/* eMMA can only do RGB565 */
+	if (mx27_camera_emma(pcdev) && pix->pixelformat != V4L2_PIX_FMT_RGB565)
+		return -EINVAL;
+
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
+		return ret;
+
+	if (mf.code != xlate->code)
+		return -EINVAL;
+
+	pix->width		= mf.width;
+	pix->height		= mf.height;
+	pix->field		= mf.field;
+	pix->colorspace		= mf.colorspace;
+	icd->current_fmt	= xlate;
+
+	return 0;
+}
+
+static int mx2_camera_try_fmt(struct soc_camera_device *icd,
+				  struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct mx2_camera_dev *pcdev = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	__u32 pixfmt = pix->pixelformat;
+	unsigned int width_limit;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (pixfmt && !xlate) {
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	/* FIXME: implement MX27 limits */
+
+	/* eMMA can only do RGB565 */
+	if (mx27_camera_emma(pcdev) && pixfmt != V4L2_PIX_FMT_RGB565)
+		return -EINVAL;
+
+	/* limit to MX25 hardware capabilities */
+	if (cpu_is_mx25()) {
+		if (xlate->host_fmt->bits_per_sample <= 8)
+			width_limit = 0xffff * 4;
+		else
+			width_limit = 0xffff * 2;
+		/* CSIIMAG_PARA limit */
+		if (pix->width > width_limit)
+			pix->width = width_limit;
+		if (pix->height > 0xffff)
+			pix->height = 0xffff;
+
+		pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
+				xlate->host_fmt);
+		if (pix->bytesperline < 0)
+			return pix->bytesperline;
+		pix->sizeimage = pix->height * pix->bytesperline;
+		if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
+			dev_warn(icd->dev.parent,
+					"Image size (%u) above limit\n",
+					pix->sizeimage);
+			return -EINVAL;
+		}
+	}
+
+	/* limit to sensor capabilities */
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	if (mf.field == V4L2_FIELD_ANY)
+		mf.field = V4L2_FIELD_NONE;
+	if (mf.field != V4L2_FIELD_NONE) {
+		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+				mf.field);
+		return -EINVAL;
+	}
+
+	pix->width	= mf.width;
+	pix->height	= mf.height;
+	pix->field	= mf.field;
+	pix->colorspace	= mf.colorspace;
+
+	return 0;
+}
+
+static int mx2_camera_querycap(struct soc_camera_host *ici,
+			       struct v4l2_capability *cap)
+{
+	/* cap->name is set by the friendly caller:-> */
+	strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
+	cap->version = MX2_CAM_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+
+	return 0;
+}
+
+static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+			      struct v4l2_requestbuffers *p)
+{
+	int i;
+
+	for (i = 0; i < p->count; i++) {
+		struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+						      struct mx2_buffer, vb);
+		INIT_LIST_HEAD(&buf->vb.queue);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_MACH_MX27
+static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state)
+{
+	struct videobuf_buffer *vb;
+	struct mx2_buffer *buf;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	if (!pcdev->active) {
+		dev_err(pcdev->dev, "%s called with no active buffer!\n",
+				__func__);
+		goto out;
+	}
+
+	vb = &pcdev->active->vb;
+	buf = container_of(vb, struct mx2_buffer, vb);
+	WARN_ON(list_empty(&vb->queue));
+	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+		vb, vb->baddr, vb->bsize);
+
+	/* _init is used to debug races, see comment in pxa_camera_reqbufs() */
+	list_del_init(&vb->queue);
+	vb->state = state;
+	do_gettimeofday(&vb->ts);
+	vb->field_count++;
+
+	wake_up(&vb->done);
+
+	if (list_empty(&pcdev->capture)) {
+		pcdev->active = NULL;
+		goto out;
+	}
+
+	pcdev->active = list_entry(pcdev->capture.next,
+			struct mx2_buffer, vb.queue);
+
+	vb = &pcdev->active->vb;
+	vb->state = VIDEOBUF_ACTIVE;
+
+	ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
+			vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ);
+
+	if (ret) {
+		vb->state = VIDEOBUF_ERROR;
+		pcdev->active = NULL;
+		wake_up(&vb->done);
+	}
+
+out:
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx27_camera_dma_err_callback(int channel, void *data, int err)
+{
+	struct mx2_camera_dev *pcdev = data;
+
+	mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
+}
+
+static void mx27_camera_dma_callback(int channel, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+
+	mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
+}
+
+#define DMA_REQ_CSI_RX          31 /* FIXME: Add this to a resource */
+
+static int __devinit mx27_camera_dma_init(struct platform_device *pdev,
+		struct mx2_camera_dev *pcdev)
+{
+	int err;
+
+	pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
+	if (pcdev->dma < 0) {
+		dev_err(&pdev->dev, "%s failed to request DMA channel\n",
+				__func__);
+		return pcdev->dma;
+	}
+
+	err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
+					mx27_camera_dma_err_callback, pcdev);
+	if (err) {
+		dev_err(&pdev->dev, "%s failed to set DMA callback\n",
+				__func__);
+		goto err_out;
+	}
+
+	err = imx_dma_config_channel(pcdev->dma,
+			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+			DMA_REQ_CSI_RX, 1);
+	if (err) {
+		dev_err(&pdev->dev, "%s failed to config DMA channel\n",
+				__func__);
+		goto err_out;
+	}
+
+	imx_dma_config_burstlen(pcdev->dma, 64);
+
+	return 0;
+
+err_out:
+	imx_dma_free(pcdev->dma);
+
+	return err;
+}
+#endif /* CONFIG_MACH_MX27 */
+
+static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
+{
+	struct soc_camera_file *icf = file->private_data;
+
+	return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+}
+
+static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
+	.owner		= THIS_MODULE,
+	.add		= mx2_camera_add_device,
+	.remove		= mx2_camera_remove_device,
+	.set_fmt	= mx2_camera_set_fmt,
+	.set_crop	= mx2_camera_set_crop,
+	.try_fmt	= mx2_camera_try_fmt,
+	.init_videobuf	= mx2_camera_init_videobuf,
+	.reqbufs	= mx2_camera_reqbufs,
+	.poll		= mx2_camera_poll,
+	.querycap	= mx2_camera_querycap,
+	.set_bus_param	= mx2_camera_set_bus_param,
+};
+
+static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev,
+		int bufnum, int state)
+{
+	struct mx2_buffer *buf;
+	struct videobuf_buffer *vb;
+	unsigned long phys;
+
+	if (!list_empty(&pcdev->active_bufs)) {
+		buf = list_entry(pcdev->active_bufs.next,
+			struct mx2_buffer, vb.queue);
+
+		BUG_ON(buf->bufnum != bufnum);
+
+		vb = &buf->vb;
+#ifdef DEBUG
+		phys = videobuf_to_dma_contig(vb);
+		if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum)
+				!= phys) {
+			dev_err(pcdev->dev, "%p != %p\n", phys,
+					readl(pcdev->base_emma +
+						PRP_DEST_RGB1_PTR +
+						4 * bufnum));
+		}
+#endif
+		dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb,
+				vb->baddr, vb->bsize);
+
+		list_del(&vb->queue);
+		vb->state = state;
+		do_gettimeofday(&vb->ts);
+		vb->field_count++;
+
+		wake_up(&vb->done);
+	}
+
+	if (list_empty(&pcdev->capture)) {
+		writel(pcdev->discard_buffer_dma, pcdev->base_emma +
+				PRP_DEST_RGB1_PTR + 4 * bufnum);
+		return;
+	}
+
+	buf = list_entry(pcdev->capture.next,
+			struct mx2_buffer, vb.queue);
+
+	buf->bufnum = bufnum;
+
+	list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
+
+	vb = &buf->vb;
+	vb->state = VIDEOBUF_ACTIVE;
+
+	phys = videobuf_to_dma_contig(vb);
+	writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum);
+}
+
+static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
+{
+	struct mx2_camera_dev *pcdev = data;
+	unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
+	struct mx2_buffer *buf;
+
+	if (status & (1 << 7)) { /* overflow */
+		u32 cntl;
+		/*
+		 * We only disable channel 1 here since this is the only
+		 * enabled channel
+		 *
+		 * FIXME: the correct DMA overflow handling should be resetting
+		 * the buffer, returning an error frame, and continuing with
+		 * the next one.
+		 */
+		cntl = readl(pcdev->base_emma + PRP_CNTL);
+		writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL);
+		writel(cntl, pcdev->base_emma + PRP_CNTL);
+	}
+	if ((status & (3 << 5)) == (3 << 5)
+			&& !list_empty(&pcdev->active_bufs)) {
+		/*
+		 * Both buffers have triggered, process the one we're expecting
+		 * to first
+		 */
+		buf = list_entry(pcdev->active_bufs.next,
+			struct mx2_buffer, vb.queue);
+		mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE);
+		status &= ~(1 << (6 - buf->bufnum)); /* mark processed */
+	}
+	if (status & (1 << 6))
+		mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE);
+	if (status & (1 << 5))
+		mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE);
+
+	writel(status, pcdev->base_emma + PRP_INTRSTATUS);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev)
+{
+	struct resource *res_emma = pcdev->res_emma;
+	int err = 0;
+
+	if (!request_mem_region(res_emma->start, resource_size(res_emma),
+				MX2_CAM_DRV_NAME)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma));
+	if (!pcdev->base_emma) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+
+	err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0,
+			MX2_CAM_DRV_NAME, pcdev);
+	if (err) {
+		dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n");
+		goto exit_iounmap;
+	}
+
+	pcdev->clk_emma = clk_get(NULL, "emma");
+	if (IS_ERR(pcdev->clk_emma)) {
+		err = PTR_ERR(pcdev->clk_emma);
+		goto exit_free_irq;
+	}
+
+	clk_enable(pcdev->clk_emma);
+
+	err = mx27_camera_emma_prp_reset(pcdev);
+	if (err)
+		goto exit_clk_emma_put;
+
+	return err;
+
+exit_clk_emma_put:
+	clk_disable(pcdev->clk_emma);
+	clk_put(pcdev->clk_emma);
+exit_free_irq:
+	free_irq(pcdev->irq_emma, pcdev);
+exit_iounmap:
+	iounmap(pcdev->base_emma);
+exit_release:
+	release_mem_region(res_emma->start, resource_size(res_emma));
+out:
+	return err;
+}
+
+static int __devinit mx2_camera_probe(struct platform_device *pdev)
+{
+	struct mx2_camera_dev *pcdev;
+	struct resource *res_csi, *res_emma;
+	void __iomem *base_csi;
+	int irq_csi, irq_emma;
+	irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq
+		: mx27_camera_irq;
+	int err = 0;
+
+	dev_dbg(&pdev->dev, "initialising\n");
+
+	res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq_csi = platform_get_irq(pdev, 0);
+	if (res_csi == NULL || irq_csi < 0) {
+		dev_err(&pdev->dev, "Missing platform resources data\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
+	if (!pcdev) {
+		dev_err(&pdev->dev, "Could not allocate pcdev\n");
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	pcdev->clk_csi = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pcdev->clk_csi)) {
+		err = PTR_ERR(pcdev->clk_csi);
+		goto exit_kfree;
+	}
+
+	dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n",
+			clk_get_rate(pcdev->clk_csi));
+
+	/* Initialize DMA */
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		err = mx27_camera_dma_init(pdev, pcdev);
+		if (err)
+			goto exit_clk_put;
+	}
+#endif /* CONFIG_MACH_MX27 */
+
+	pcdev->res_csi = res_csi;
+	pcdev->pdata = pdev->dev.platform_data;
+	if (pcdev->pdata) {
+		long rate;
+
+		pcdev->platform_flags = pcdev->pdata->flags;
+
+		rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+		if (rate <= 0) {
+			err = -ENODEV;
+			goto exit_dma_free;
+		}
+		err = clk_set_rate(pcdev->clk_csi, rate);
+		if (err < 0)
+			goto exit_dma_free;
+	}
+
+	INIT_LIST_HEAD(&pcdev->capture);
+	INIT_LIST_HEAD(&pcdev->active_bufs);
+	spin_lock_init(&pcdev->lock);
+
+	/*
+	 * Request the regions.
+	 */
+	if (!request_mem_region(res_csi->start, resource_size(res_csi),
+				MX2_CAM_DRV_NAME)) {
+		err = -EBUSY;
+		goto exit_dma_free;
+	}
+
+	base_csi = ioremap(res_csi->start, resource_size(res_csi));
+	if (!base_csi) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+	pcdev->irq_csi = irq_csi;
+	pcdev->base_csi = base_csi;
+	pcdev->base_dma = res_csi->start;
+	pcdev->dev = &pdev->dev;
+
+	err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0,
+			MX2_CAM_DRV_NAME, pcdev);
+	if (err) {
+		dev_err(pcdev->dev, "Camera interrupt register failed \n");
+		goto exit_iounmap;
+	}
+
+	if (cpu_is_mx27()) {
+		/* EMMA support */
+		res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		irq_emma = platform_get_irq(pdev, 1);
+
+		if (res_emma && irq_emma >= 0) {
+			dev_info(&pdev->dev, "Using EMMA\n");
+			pcdev->use_emma = 1;
+			pcdev->res_emma = res_emma;
+			pcdev->irq_emma = irq_emma;
+			if (mx27_camera_emma_init(pcdev))
+				goto exit_free_irq;
+		}
+	}
+
+	pcdev->soc_host.drv_name	= MX2_CAM_DRV_NAME,
+	pcdev->soc_host.ops		= &mx2_soc_camera_host_ops,
+	pcdev->soc_host.priv		= pcdev;
+	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
+	pcdev->soc_host.nr		= pdev->id;
+	err = soc_camera_host_register(&pcdev->soc_host);
+	if (err)
+		goto exit_free_emma;
+
+	return 0;
+
+exit_free_emma:
+	if (mx27_camera_emma(pcdev)) {
+		free_irq(pcdev->irq_emma, pcdev);
+		clk_disable(pcdev->clk_emma);
+		clk_put(pcdev->clk_emma);
+		iounmap(pcdev->base_emma);
+		release_mem_region(res_emma->start, resource_size(res_emma));
+	}
+exit_free_irq:
+	free_irq(pcdev->irq_csi, pcdev);
+exit_iounmap:
+	iounmap(base_csi);
+exit_release:
+	release_mem_region(res_csi->start, resource_size(res_csi));
+exit_dma_free:
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dma_free(pcdev->dma);
+exit_clk_put:
+	clk_put(pcdev->clk_csi);
+#endif /* CONFIG_MACH_MX27 */
+exit_kfree:
+	kfree(pcdev);
+exit:
+	return err;
+}
+
+static int __devexit mx2_camera_remove(struct platform_device *pdev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct mx2_camera_dev *pcdev = container_of(soc_host,
+			struct mx2_camera_dev, soc_host);
+	struct resource *res;
+
+	clk_put(pcdev->clk_csi);
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dma_free(pcdev->dma);
+#endif /* CONFIG_MACH_MX27 */
+	free_irq(pcdev->irq_csi, pcdev);
+	if (mx27_camera_emma(pcdev))
+		free_irq(pcdev->irq_emma, pcdev);
+
+	soc_camera_host_unregister(&pcdev->soc_host);
+
+	iounmap(pcdev->base_csi);
+
+	if (mx27_camera_emma(pcdev)) {
+		clk_disable(pcdev->clk_emma);
+		clk_put(pcdev->clk_emma);
+		iounmap(pcdev->base_emma);
+		res = pcdev->res_emma;
+		release_mem_region(res->start, resource_size(res));
+	}
+
+	res = pcdev->res_csi;
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(pcdev);
+
+	dev_info(&pdev->dev, "MX2 Camera driver unloaded\n");
+
+	return 0;
+}
+
+static struct platform_driver mx2_camera_driver = {
+	.driver 	= {
+		.name	= MX2_CAM_DRV_NAME,
+	},
+	.remove		= __devexit_p(mx2_camera_remove),
+};
+
+
+static int __init mx2_camera_init(void)
+{
+	return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe);
+}
+
+static void __exit mx2_camera_exit(void)
+{
+	return platform_driver_unregister(&mx2_camera_driver);
+}
+
+module_init(mx2_camera_init);
+module_exit(mx2_camera_exit);
+
+MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
+MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index d477e30..a9be14c 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -672,7 +672,7 @@
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -689,7 +689,7 @@
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
 		dev_err(icd->dev.parent,
-			"Invalid format code #%d: %d\n", idx, code);
+			"Invalid format code #%u: %d\n", idx, code);
 		return 0;
 	}
 
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index 97c53949..e63233fd 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,8 +1,8 @@
 config VIDEO_OMAP2_VOUT
 	tristate "OMAP2/OMAP3 V4L2-Display driver"
-	depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 	select VIDEOBUF_GEN
-	select VIDEOBUF_DMA_SG
+	select VIDEOBUF_DMA_CONTIG
 	select OMAP2_DSS
 	select OMAP2_VRAM
 	select OMAP2_VRFB
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b8bab00..b2878807 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -3,5 +3,5 @@
 #
 
 # OMAP2/3 Display driver
-omap-vout-mod-objs := omap_vout.o omap_voutlib.o
-obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout-mod.o
+omap-vout-y := omap_vout.o omap_voutlib.o
+obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4c0ab49..929073e 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -38,8 +38,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/videodev2.h>
+#include <linux/slab.h>
 
-#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
@@ -1053,9 +1054,9 @@
 			    struct videobuf_buffer *vb,
 			    enum v4l2_field field)
 {
+	dma_addr_t dmabuf;
 	struct vid_vrfb_dma *tx;
 	enum dss_rotation rotation;
-	struct videobuf_dmabuf *dmabuf = NULL;
 	struct omap_vout_device *vout = q->priv_data;
 	u32 dest_frame_index = 0, src_element_index = 0;
 	u32 dest_element_index = 0, src_frame_index = 0;
@@ -1074,24 +1075,17 @@
 	if (V4L2_MEMORY_USERPTR == vb->memory) {
 		if (0 == vb->baddr)
 			return -EINVAL;
-		/* Virtual address */
-		/* priv points to struct videobuf_pci_sg_memory. But we went
-		 * pointer to videobuf_dmabuf, which is member of
-		 * videobuf_pci_sg_memory */
-		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
-		dmabuf->vmalloc = (void *) vb->baddr;
-
 		/* Physical address */
-		dmabuf->bus_addr =
-			(dma_addr_t) omap_vout_uservirt_to_phys(vb->baddr);
+		vout->queued_buf_addr[vb->i] = (u8 *)
+			omap_vout_uservirt_to_phys(vb->baddr);
+	} else {
+		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 	}
 
-	if (!rotation_enabled(vout)) {
-		dmabuf = videobuf_to_dma(q->bufs[vb->i]);
-		vout->queued_buf_addr[vb->i] = (u8 *) dmabuf->bus_addr;
+	if (!rotation_enabled(vout))
 		return 0;
-	}
-	dmabuf = videobuf_to_dma(q->bufs[vb->i]);
+
+	dmabuf = vout->buf_phy_addr[vb->i];
 	/* If rotation is enabled, copy input buffer into VRFB
 	 * memory space using DMA. We are copying input buffer
 	 * into VRFB memory space of desired angle and DSS will
@@ -1120,7 +1114,7 @@
 			tx->dev_id, 0x0);
 	/* src_port required only for OMAP1 */
 	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-			dmabuf->bus_addr, src_element_index, src_frame_index);
+			dmabuf, src_element_index, src_frame_index);
 	/*set dma source burst mode for VRFB */
 	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
 	rotation = calc_rotation(vout);
@@ -1211,7 +1205,6 @@
 	void *pos;
 	unsigned long start = vma->vm_start;
 	unsigned long size = (vma->vm_end - vma->vm_start);
-	struct videobuf_dmabuf *dmabuf = NULL;
 	struct omap_vout_device *vout = file->private_data;
 	struct videobuf_queue *q = &vout->vbq;
 
@@ -1241,8 +1234,7 @@
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &omap_vout_vm_ops;
 	vma->vm_private_data = (void *) vout;
-	dmabuf = videobuf_to_dma(q->bufs[i]);
-	pos = dmabuf->vmalloc;
+	pos = (void *)vout->buf_virt_addr[i];
 	vma->vm_pgoff = virt_to_phys((void *)pos) >> PAGE_SHIFT;
 	while (size > 0) {
 		unsigned long pfn;
@@ -1347,8 +1339,8 @@
 	video_vbq_ops.buf_queue = omap_vout_buffer_queue;
 	spin_lock_init(&vout->vbq_lock);
 
-	videobuf_queue_sg_init(q, &video_vbq_ops, NULL, &vout->vbq_lock,
-			vout->type, V4L2_FIELD_NONE,
+	videobuf_queue_dma_contig_init(q, &video_vbq_ops, q->dev,
+			&vout->vbq_lock, vout->type, V4L2_FIELD_NONE,
 			sizeof(struct videobuf_buffer), vout);
 
 	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "Exiting %s\n", __func__);
@@ -1799,7 +1791,6 @@
 	unsigned int i, num_buffers = 0;
 	struct omap_vout_device *vout = fh;
 	struct videobuf_queue *q = &vout->vbq;
-	struct videobuf_dmabuf *dmabuf = NULL;
 
 	if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
 		return -EINVAL;
@@ -1825,8 +1816,7 @@
 		num_buffers = (vout->vid == OMAP_VIDEO1) ?
 			video1_numbuffers : video2_numbuffers;
 		for (i = num_buffers; i < vout->buffer_allocated; i++) {
-			dmabuf = videobuf_to_dma(q->bufs[i]);
-			omap_vout_free_buffer((u32)dmabuf->vmalloc,
+			omap_vout_free_buffer(vout->buf_virt_addr[i],
 					vout->buffer_size);
 			vout->buf_virt_addr[i] = 0;
 			vout->buf_phy_addr[i] = 0;
@@ -1855,12 +1845,7 @@
 		goto reqbuf_err;
 
 	vout->buffer_allocated = req->count;
-	for (i = 0; i < req->count; i++) {
-		dmabuf = videobuf_to_dma(q->bufs[i]);
-		dmabuf->vmalloc = (void *) vout->buf_virt_addr[i];
-		dmabuf->bus_addr = (dma_addr_t) vout->buf_phy_addr[i];
-		dmabuf->sglen = 1;
-	}
+
 reqbuf_err:
 	mutex_unlock(&vout->lock);
 	return ret;
@@ -2371,12 +2356,11 @@
 
 	for (k = 0; k < pdev->num_resources; k++) {
 
-		vout = kmalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
+		vout = kzalloc(sizeof(struct omap_vout_device), GFP_KERNEL);
 		if (!vout) {
 			dev_err(&pdev->dev, ": could not allocate memory\n");
 			return -ENOMEM;
 		}
-		memset(vout, 0, sizeof(struct omap_vout_device));
 
 		vout->vid = k;
 		vid_dev->vouts[k] = vout;
@@ -2489,7 +2473,7 @@
 
 	for (k = 0; k < vid_dev->num_displays; k++) {
 		if (vid_dev->displays[k]->state != OMAP_DSS_DISPLAY_DISABLED)
-			vid_dev->displays[k]->disable(vid_dev->displays[k]);
+			vid_dev->displays[k]->driver->disable(vid_dev->displays[k]);
 
 		omap_dss_put_device(vid_dev->displays[k]);
 	}
@@ -2546,7 +2530,9 @@
 			def_display = NULL;
 		}
 		if (def_display) {
-			ret = def_display->enable(def_display);
+			struct omap_dss_driver *dssdrv = def_display->driver;
+
+			ret = dssdrv->enable(def_display);
 			if (ret) {
 				/* Here we are not considering a error
 				 *  as display may be enabled by frame
@@ -2560,21 +2546,21 @@
 			if (def_display->caps &
 					OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
 #ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
-				if (def_display->enable_te)
-					def_display->enable_te(def_display, 1);
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
+				if (dssdrv->enable_te)
+					dssdrv->enable_te(def_display, 1);
+				if (dssdrv->set_update_mode)
+					dssdrv->set_update_mode(def_display,
 							OMAP_DSS_UPDATE_AUTO);
 #else	/* MANUAL_UPDATE */
-				if (def_display->enable_te)
-					def_display->enable_te(def_display, 0);
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
+				if (dssdrv->enable_te)
+					dssdrv->enable_te(def_display, 0);
+				if (dssdrv->set_update_mode)
+					dssdrv->set_update_mode(def_display,
 							OMAP_DSS_UPDATE_MANUAL);
 #endif
 			} else {
-				if (def_display->set_update_mode)
-					def_display->set_update_mode(def_display,
+				if (dssdrv->set_update_mode)
+					dssdrv->set_update_mode(def_display,
 							OMAP_DSS_UPDATE_AUTO);
 			}
 		}
@@ -2593,8 +2579,8 @@
 	for (i = 0; i < vid_dev->num_displays; i++) {
 		struct omap_dss_device *display = vid_dev->displays[i];
 
-		if (display->update)
-			display->update(display, 0, 0,
+		if (display->driver->update)
+			display->driver->update(display, 0, 0,
 					display->panel.timings.x_res,
 					display->panel.timings.y_res);
 	}
@@ -2609,8 +2595,8 @@
 		if (ovl->manager && ovl->manager->device)
 			def_display = ovl->manager->device;
 
-		if (def_display)
-			def_display->disable(def_display);
+		if (def_display && def_display->driver)
+			def_display->driver->disable(def_display);
 	}
 probe_err0:
 	kfree(vid_dev);
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index c33acc9..34034a7 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1092,10 +1092,10 @@
 #endif
 };
 
-static int ov772x_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(ov772x_cfmts))
+	if (index >= ARRAY_SIZE(ov772x_cfmts))
 		return -EINVAL;
 
 	*code = ov772x_cfmts[index].code;
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 035e9ec..7ce9e05 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -614,10 +614,10 @@
 	return 0;
 }
 
-static int ov9640_enum_fmt(struct v4l2_subdev *sd, int index,
+static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(ov9640_codes))
+	if (index >= ARRAY_SIZE(ov9640_codes))
 		return -EINVAL;
 
 	*code = ov9640_codes[index];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 6bc16c1..3092abf 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -117,6 +117,7 @@
 static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
 	{ .module_id = PVR2_CLIENT_ID_CX25840 },
 	{ .module_id = PVR2_CLIENT_ID_TUNER },
+	{ .module_id = PVR2_CLIENT_ID_DEMOD },
 };
 
 static const struct pvr2_device_desc pvr2_device_gotview_2 = {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index e5b9594..273c8d4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -177,6 +177,11 @@
 	unsigned int flag_has_composite:1;     /* Has composite input */
 	unsigned int flag_has_svideo:1;        /* Has s-video input */
 	unsigned int flag_fx2_16kb:1;          /* 16KB FX2 firmware OK here */
+
+	/* If this driver is considered experimental, i.e. not all aspects
+	   are working correctly and/or it is untested, mark that fact
+	   with this flag. */
+	unsigned int flag_is_experimental:1;
 };
 
 extern struct usb_device_id pvr2_device_table[];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 301ef19..70ea578d 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2459,6 +2459,19 @@
 		   hdw,hdw_desc->description);
 	pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
 		hdw_desc->description);
+	if (hdw_desc->flag_is_experimental) {
+		pvr2_trace(PVR2_TRACE_INFO, "**********");
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "WARNING: Support for this device (%s) is"
+			   " experimental.", hdw_desc->description);
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "Important functionality might not be"
+			   " entirely working.");
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "Please consider contacting the driver author to"
+			   " help with further stabilization of the driver.");
+		pvr2_trace(PVR2_TRACE_INFO, "**********");
+	}
 	if (!hdw) goto fail;
 
 	init_timer(&hdw->quiescent_timer);
@@ -3056,14 +3069,14 @@
 	}
 
 	if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
-		struct v4l2_format fmt;
+		struct v4l2_mbus_framefmt fmt;
 		memset(&fmt, 0, sizeof(fmt));
-		fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		fmt.fmt.pix.width = hdw->res_hor_val;
-		fmt.fmt.pix.height = hdw->res_ver_val;
+		fmt.width = hdw->res_hor_val;
+		fmt.height = hdw->res_ver_val;
+		fmt.code = V4L2_MBUS_FMT_FIXED;
 		pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
-			   fmt.fmt.pix.width, fmt.fmt.pix.height);
-		v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_fmt, &fmt);
+			   fmt.width, fmt.height);
+		v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt);
 	}
 
 	if (hdw->srate_dirty || hdw->force_dirty) {
@@ -4084,12 +4097,20 @@
 
 void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
 {
-	char da[1];
+	char *da;
 	unsigned int pipe;
 	int ret;
 
 	if (!hdw->usb_dev) return;
 
+	da = kmalloc(16, GFP_KERNEL);
+
+	if (da == NULL) {
+		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+			   "Unable to allocate memory to control CPU reset");
+		return;
+	}
+
 	pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
 
 	da[0] = val ? 0x01 : 0x00;
@@ -4103,6 +4124,8 @@
 			   "cpureset_assert(%d) error=%d",val,ret);
 		pvr2_hdw_render_useless(hdw);
 	}
+
+	kfree(da);
 }
 
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index eeacd0f..2254194 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -153,12 +153,12 @@
 
 	usb_deregister(&pvr_driver);
 
+	pvr2_context_global_done();
+
 #ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
 	pvr2_sysfs_class_destroy(class_ptr);
 #endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
 
-	pvr2_context_global_done();
-
 	pvr2_trace(PVR2_TRACE_INIT,"pvr_exit complete");
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 71f5056..3d7e5aab 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -74,7 +74,7 @@
 	int ctl_id;
 	struct pvr2_sysfs *chptr;
 	struct pvr2_sysfs_ctl_item *item_next;
-	struct attribute *attr_gen[7];
+	struct attribute *attr_gen[8];
 	struct attribute_group grp;
 	int created_ok;
 	char name[80];
@@ -511,6 +511,7 @@
 
 static void class_dev_destroy(struct pvr2_sysfs *sfp)
 {
+	struct device *dev;
 	if (!sfp->class_dev) return;
 #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC
 	pvr2_sysfs_tear_down_debugifc(sfp);
@@ -542,6 +543,9 @@
 	}
 	pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
 	dev_set_drvdata(sfp->class_dev, NULL);
+	dev = sfp->class_dev->parent;
+	sfp->class_dev->parent = NULL;
+	put_device(dev);
 	device_unregister(sfp->class_dev);
 	sfp->class_dev = NULL;
 }
@@ -631,10 +635,11 @@
 	pvr2_sysfs_trace("Creating class_dev id=%p",class_dev);
 
 	class_dev->class = &class_ptr->class;
+
 	dev_set_name(class_dev, "%s",
 		     pvr2_hdw_get_device_identifier(sfp->channel.hdw));
 
-	class_dev->parent = &usb_dev->dev;
+	class_dev->parent = get_device(&usb_dev->dev);
 
 	sfp->class_dev = class_dev;
 	dev_set_drvdata(class_dev, sfp);
@@ -775,7 +780,8 @@
 	struct pvr2_sysfs_class *clp;
 	clp = kzalloc(sizeof(*clp),GFP_KERNEL);
 	if (!clp) return clp;
-	pvr2_sysfs_trace("Creating pvr2_sysfs_class id=%p",clp);
+	pvr2_sysfs_trace("Creating and registering pvr2_sysfs_class id=%p",
+			 clp);
 	clp->class.name = "pvrusb2";
 	clp->class.class_release = pvr2_sysfs_class_release;
 	clp->class.dev_release = pvr2_sysfs_release;
@@ -791,6 +797,7 @@
 
 void pvr2_sysfs_class_destroy(struct pvr2_sysfs_class *clp)
 {
+	pvr2_sysfs_trace("Unregistering pvr2_sysfs_class id=%p", clp);
 	class_unregister(&clp->class);
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 5ffa0d2..aaafa03 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -883,6 +883,17 @@
 {
 	struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
 	enum pvr2_config cfg = dip->config;
+	char msg[80];
+	unsigned int mcnt;
+
+	/* Construct the unregistration message *before* we actually
+	   perform the unregistration step.  By doing it this way we don't
+	   have to worry about potentially touching deleted resources. */
+	mcnt = scnprintf(msg, sizeof(msg) - 1,
+			 "pvrusb2: unregistered device %s [%s]",
+			 video_device_node_name(&dip->devbase),
+			 pvr2_config_get_name(cfg));
+	msg[mcnt] = 0;
 
 	pvr2_hdw_v4l_store_minor_number(hdw,dip->minor_type,-1);
 
@@ -894,9 +905,7 @@
 	   are gone. */
 	video_unregister_device(&dip->devbase);
 
-	printk(KERN_INFO "pvrusb2: unregistered device %s [%s]\n",
-	       video_device_node_name(&dip->devbase),
-	       pvr2_config_get_name(cfg));
+	printk(KERN_INFO "%s\n", msg);
 
 }
 
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 7fe70e7..fb242f6 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1247,7 +1247,7 @@
 		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
 }
 
-static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
+static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -1264,7 +1264,7 @@
 
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
-		dev_err(dev, "Invalid format code #%d: %d\n", idx, code);
+		dev_err(dev, "Invalid format code #%u: %d\n", idx, code);
 		return 0;
 	}
 
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 2c3b58c..47fd207 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -481,10 +481,10 @@
 	return 0;
 }
 
-static int rj54n1_enum_fmt(struct v4l2_subdev *sd, int index,
+static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
-	if ((unsigned int)index >= ARRAY_SIZE(rj54n1_colour_fmts))
+	if (index >= ARRAY_SIZE(rj54n1_colour_fmts))
 		return -EINVAL;
 
 	*code = rj54n1_colour_fmts[index].code;
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 53b6fcd..76da743 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1117,13 +1117,6 @@
 	return 0;
 }
 
-static int saa711x_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return saa711x_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
 {
 	saa711x_set_lcr(sd, NULL);
@@ -1136,12 +1129,13 @@
 	return 0;
 }
 
-static int saa711x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
 		return -EINVAL;
-
-	return saa711x_set_size(sd, fmt->fmt.pix.width, fmt->fmt.pix.height);
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	return saa711x_set_size(sd, fmt->width, fmt->height);
 }
 
 /* Decode the sliced VBI data stream as created by the saa7115.
@@ -1556,8 +1550,7 @@
 static const struct v4l2_subdev_video_ops saa711x_video_ops = {
 	.s_routing = saa711x_s_routing,
 	.s_crystal_freq = saa711x_s_crystal_freq,
-	.g_fmt = saa711x_g_fmt,
-	.s_fmt = saa711x_s_fmt,
+	.s_mbus_fmt = saa711x_s_mbus_fmt,
 	.s_stream = saa711x_s_stream,
 	.querystd = saa711x_querystd,
 	.g_input_status = saa711x_g_input_status,
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 87986ad..79fffcf 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -645,13 +645,6 @@
 	return 0;
 }
 
-static int saa7127_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return saa7127_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
 {
 	switch (data->id) {
@@ -731,7 +724,6 @@
 };
 
 static const struct v4l2_subdev_video_ops saa7127_video_ops = {
-	.g_fmt = saa7127_g_fmt,
 	.s_std_output = saa7127_s_std_output,
 	.s_routing = saa7127_s_routing,
 	.s_stream = saa7127_s_stream,
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index 1eabff6..40fd31c 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -846,24 +846,28 @@
 	return 0;
 }
 
-static int saa6752hs_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
 {
 	struct saa6752hs_state *h = to_state(sd);
 
 	if (h->video_format == SAA6752HS_VF_UNKNOWN)
 		h->video_format = SAA6752HS_VF_D1;
-	f->fmt.pix.width =
-		v4l2_format_table[h->video_format].fmt.pix.width;
-	f->fmt.pix.height =
-		v4l2_format_table[h->video_format].fmt.pix.height;
+	f->width = v4l2_format_table[h->video_format].fmt.pix.width;
+	f->height = v4l2_format_table[h->video_format].fmt.pix.height;
+	f->code = V4L2_MBUS_FMT_FIXED;
+	f->field = V4L2_FIELD_INTERLACED;
+	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	return 0;
 }
 
-static int saa6752hs_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+static int saa6752hs_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
 {
 	struct saa6752hs_state *h = to_state(sd);
 	int dist_352, dist_480, dist_720;
 
+	if (f->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
+
 	/*
 	  FIXME: translate and round width/height into EMPRESS
 	  subsample type:
@@ -876,28 +880,30 @@
 	  D1     | 720x576 | 720x480
 	*/
 
-	dist_352 = abs(f->fmt.pix.width - 352);
-	dist_480 = abs(f->fmt.pix.width - 480);
-	dist_720 = abs(f->fmt.pix.width - 720);
+	dist_352 = abs(f->width - 352);
+	dist_480 = abs(f->width - 480);
+	dist_720 = abs(f->width - 720);
 	if (dist_720 < dist_480) {
-		f->fmt.pix.width = 720;
-		f->fmt.pix.height = 576;
+		f->width = 720;
+		f->height = 576;
 		h->video_format = SAA6752HS_VF_D1;
 	} else if (dist_480 < dist_352) {
-		f->fmt.pix.width = 480;
-		f->fmt.pix.height = 576;
+		f->width = 480;
+		f->height = 576;
 		h->video_format = SAA6752HS_VF_2_3_D1;
 	} else {
-		f->fmt.pix.width = 352;
-		if (abs(f->fmt.pix.height - 576) <
-		    abs(f->fmt.pix.height - 288)) {
-			f->fmt.pix.height = 576;
+		f->width = 352;
+		if (abs(f->height - 576) <
+		    abs(f->height - 288)) {
+			f->height = 576;
 			h->video_format = SAA6752HS_VF_1_2_D1;
 		} else {
-			f->fmt.pix.height = 288;
+			f->height = 288;
 			h->video_format = SAA6752HS_VF_SIF;
 		}
 	}
+	f->field = V4L2_FIELD_INTERLACED;
+	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	return 0;
 }
 
@@ -932,8 +938,8 @@
 };
 
 static const struct v4l2_subdev_video_ops saa6752hs_video_ops = {
-	.s_fmt = saa6752hs_s_fmt,
-	.g_fmt = saa6752hs_g_fmt,
+	.s_mbus_fmt = saa6752hs_s_mbus_fmt,
+	.g_mbus_fmt = saa6752hs_g_mbus_fmt,
 };
 
 static const struct v4l2_subdev_ops saa6752hs_ops = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 72700d4e..07f6bb8 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3897,6 +3897,40 @@
 			.gpio = 0x01,
 		},
 	},
+	[SAA7134_BOARD_AVERMEDIA_M733A] = {
+		.name		= "Avermedia PCI M733A",
+		.audio_clock	= 0x00187de7,
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tuner_config	= 0,
+		.gpiomask	= 0x020200000,
+		.inputs		= {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = TV,
+			.gpio = 0x00200000,
+		},
+		.mute = {
+			.name = name_mute,
+			.amux = TV,
+			.gpio = 0x01,
+		},
+	},
 	[SAA7134_BOARD_BEHOLD_401] = {
 		/*       Beholder Intl. Ltd. 2008      */
 		/*Dmitry Belimov <d.belimov@gmail.com> */
@@ -5822,6 +5856,18 @@
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_M135A,
 	}, {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0x4155,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_M733A,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0x4255,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_M733A,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = PCI_VENDOR_ID_PHILIPS,
 		.subdevice    = 0x2004,
@@ -6786,6 +6832,7 @@
 	switch (dev->board) {
 	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+	case SAA7134_BOARD_AVERMEDIA_M733A:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -7087,6 +7134,14 @@
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x0000C000, 0x0000C000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0000C000, 0x0000C000);
 		break;
+	case SAA7134_BOARD_AVERMEDIA_M733A:
+		saa7134_set_gpio(dev, 1, 1);
+		msleep(10);
+		saa7134_set_gpio(dev, 1, 0);
+		msleep(10);
+		saa7134_set_gpio(dev, 1, 1);
+		dev->has_remote = SAA7134_REMOTE_GPIO;
+		break;
 	}
 	return 0;
 }
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index ea877a5..e763f9f 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -223,9 +223,11 @@
 				struct v4l2_format *f)
 {
 	struct saa7134_dev *dev = file->private_data;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
-	saa_call_all(dev, video, g_fmt, f);
+	saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt);
 
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
 
@@ -236,8 +238,11 @@
 				struct v4l2_format *f)
 {
 	struct saa7134_dev *dev = file->private_data;
+	struct v4l2_mbus_framefmt mbus_fmt;
 
-	saa_call_all(dev, video, s_fmt, f);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
 
 	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e5565e2..0b336ca 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -141,8 +141,8 @@
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 
 	if (dev == NULL) {
-		dprintk("get_key_flydvb_trio: "
-			 "gir->c->adapter->algo_data is NULL!\n");
+		i2cdprintk("get_key_flydvb_trio: "
+			   "ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -195,8 +195,8 @@
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
-		dprintk("get_key_msi_tvanywhere_plus: "
-			"gir->c->adapter->algo_data is NULL!\n");
+		i2cdprintk("get_key_msi_tvanywhere_plus: "
+			   "ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -657,12 +657,19 @@
 		saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
 		break;
 	case SAA7134_BOARD_AVERMEDIA_M135A:
-		ir_codes     = RC_MAP_AVERMEDIA_M135A_RM_JX;
+		ir_codes     = RC_MAP_AVERMEDIA_M135A;
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
 		raw_decode   = 1;
 		break;
+	case SAA7134_BOARD_AVERMEDIA_M733A:
+		ir_codes     = RC_MAP_AVERMEDIA_M733A_RM_K6;
+		mask_keydown = 0x0040000;
+		mask_keyup   = 0x0040000;
+		mask_keycode = 0xffff;
+		raw_decode   = 1;
+		break;
 	case SAA7134_BOARD_AVERMEDIA_777:
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
 		ir_codes     = RC_MAP_AVERMEDIA;
@@ -815,7 +822,6 @@
 		mask_keyup   = 0x020000;
 		polling      = 50; /* ms */
 		break;
-	break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 3962534..756a1ca 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -303,6 +303,7 @@
 #define SAA7134_BOARD_HAWELL_HW_404M7		177
 #define SAA7134_BOARD_BEHOLD_H7             178
 #define SAA7134_BOARD_BEHOLD_A7             179
+#define SAA7134_BOARD_AVERMEDIA_M733A       180
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index d521c64..78d6995 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -1199,28 +1199,32 @@
 }
 #endif
 
-static int saa717x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
 {
-	struct v4l2_pix_format *pix;
 	int prescale, h_scale, v_scale;
 
-	pix = &fmt->fmt.pix;
 	v4l2_dbg(1, debug, sd, "decoder set size\n");
 
+	if (fmt->code != V4L2_MBUS_FMT_FIXED)
+		return -EINVAL;
+
 	/* FIXME need better bounds checking here */
-	if (pix->width < 1 || pix->width > 1440)
+	if (fmt->width < 1 || fmt->width > 1440)
 		return -EINVAL;
-	if (pix->height < 1 || pix->height > 960)
+	if (fmt->height < 1 || fmt->height > 960)
 		return -EINVAL;
 
+	fmt->field = V4L2_FIELD_INTERLACED;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
 	/* scaling setting */
 	/* NTSC and interlace only */
-	prescale = SAA717X_NTSC_WIDTH / pix->width;
+	prescale = SAA717X_NTSC_WIDTH / fmt->width;
 	if (prescale == 0)
 		prescale = 1;
-	h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / pix->width;
+	h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width;
 	/* interlace */
-	v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / pix->height;
+	v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height;
 
 	/* Horizontal prescaling etc */
 	set_h_prescale(sd, 0, prescale);
@@ -1241,19 +1245,19 @@
 	/* set video output size */
 	/* video number of pixels at output */
 	/* TASK A */
-	saa717x_write(sd, 0x5C, (u8)(pix->width & 0xFF));
-	saa717x_write(sd, 0x5D, (u8)((pix->width >> 8) & 0xFF));
+	saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF));
+	saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF));
 	/* TASK B */
-	saa717x_write(sd, 0x9C, (u8)(pix->width & 0xFF));
-	saa717x_write(sd, 0x9D, (u8)((pix->width >> 8) & 0xFF));
+	saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF));
+	saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF));
 
 	/* video number of lines at output */
 	/* TASK A */
-	saa717x_write(sd, 0x5E, (u8)(pix->height & 0xFF));
-	saa717x_write(sd, 0x5F, (u8)((pix->height >> 8) & 0xFF));
+	saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF));
+	saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF));
 	/* TASK B */
-	saa717x_write(sd, 0x9E, (u8)(pix->height & 0xFF));
-	saa717x_write(sd, 0x9F, (u8)((pix->height >> 8) & 0xFF));
+	saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF));
+	saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF));
 	return 0;
 }
 
@@ -1403,7 +1407,7 @@
 
 static const struct v4l2_subdev_video_ops saa717x_video_ops = {
 	.s_routing = saa717x_s_video_routing,
-	.s_fmt = saa717x_s_fmt,
+	.s_mbus_fmt = saa717x_s_mbus_fmt,
 	.s_stream = saa717x_s_stream,
 };
 
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 4ac3b48..961bfa2 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -878,7 +878,7 @@
 
 static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
 
-static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
+static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
 				     struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -897,7 +897,7 @@
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
 		dev_err(icd->dev.parent,
-			"Invalid format code #%d: %d\n", idx, code);
+			"Invalid format code #%u: %d\n", idx, code);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 522ba3f..b6643ca 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -62,8 +62,8 @@
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
 	/* SN9C103 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index db1ca0e..475757b 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -200,7 +200,8 @@
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int i, fmts = 0, raw_fmts = 0, ret;
+	unsigned int i, fmts = 0, raw_fmts = 0;
+	int ret;
 	enum v4l2_mbus_pixelcode code;
 
 	while (!v4l2_subdev_call(sd, video, enum_mbus_fmt, raw_fmts, &code))
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 10b003a..248c986 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -71,7 +71,7 @@
 
 static struct v4l2_subdev_core_ops platform_subdev_core_ops;
 
-static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, int index,
+static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 					enum v4l2_mbus_pixelcode *code)
 {
 	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 0a87749..07fabdd 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -267,6 +267,21 @@
 	{ TUNER_ABSENT,                 "Xceive XC4000"},
 	{ TUNER_ABSENT,                 "Dibcom 7070"},
 	{ TUNER_PHILIPS_TDA8290,        "NXP 18271C2"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	/* 160-169 */
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_ABSENT,			"unknown"},
+	{ TUNER_PHILIPS_FQ1236_MK5,	"TCL M30WTP-4N-E"},
+	{ TUNER_ABSENT,			"unknown"},
 };
 
 /* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index e826114..71c73fa 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -88,9 +88,6 @@
  * @pdata: Board specific
  * @ver: Chip version
  * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
- * @pix: Current pixel format
- * @num_fmts: Number of formats
- * @fmt_list: Format list
  * @current_std: Current standard
  * @num_stds: Number of standards
  * @std_list: Standards list
@@ -105,13 +102,9 @@
 	int ver;
 	int streaming;
 
-	struct v4l2_pix_format pix;
-	int num_fmts;
-	const struct v4l2_fmtdesc *fmt_list;
-
 	enum tvp514x_std current_std;
 	int num_stds;
-	struct tvp514x_std_info *std_list;
+	const struct tvp514x_std_info *std_list;
 	/* Input and Output Routing parameters */
 	u32 input;
 	u32 output;
@@ -203,27 +196,12 @@
 };
 
 /**
- * List of image formats supported by TVP5146/47 decoder
- * Currently we are using 8 bit mode only, but can be
- * extended to 10/20 bit mode.
- */
-static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
-	{
-	 .index = 0,
-	 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-	 .flags = 0,
-	 .description = "8-bit UYVY 4:2:2 Format",
-	 .pixelformat = V4L2_PIX_FMT_UYVY,
-	},
-};
-
-/**
  * Supported standards -
  *
  * Currently supports two standards only, need to add support for rest of the
  * modes, like SECAM, etc...
  */
-static struct tvp514x_std_info tvp514x_std_list[] = {
+static const struct tvp514x_std_info tvp514x_std_list[] = {
 	/* Standard: STD_NTSC_MJ */
 	[STD_NTSC_MJ] = {
 	 .width = NTSC_NUM_ACTIVE_PIXELS,
@@ -366,13 +344,13 @@
 }
 
 /**
- * tvp514x_get_current_std() : Get the current standard detected by TVP5146/47
+ * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
  * @sd: ptr to v4l2_subdev struct
  *
- * Get current standard detected by TVP5146/47, STD_INVALID if there is no
+ * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
  * standard detected.
  */
-static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
+static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
 {
 	u8 std, std_status;
 
@@ -518,7 +496,7 @@
  * @std_id: standard V4L2 std_id ioctl enum
  *
  * Returns the current standard detected by TVP5146/47. If no active input is
- * detected, returns -EINVAL
+ * detected then *std_id is set to 0 and the function returns 0.
  */
 static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 {
@@ -530,10 +508,12 @@
 	if (std_id == NULL)
 		return -EINVAL;
 
-	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
+	*std_id = V4L2_STD_UNKNOWN;
+
+	/* query the current standard */
+	current_std = tvp514x_query_current_std(sd);
 	if (current_std == STD_INVALID)
-		return -EINVAL;
+		return 0;
 
 	input_sel = decoder->input;
 
@@ -575,12 +555,11 @@
 	/* check whether signal is locked */
 	sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
 	if (lock_mask != (sync_lock_status & lock_mask))
-		return -EINVAL;	/* No input detected */
+		return 0;	/* No input detected */
 
-	decoder->current_std = current_std;
 	*std_id = decoder->std_list[current_std].standard.id;
 
-	v4l2_dbg(1, debug, sd, "Current STD: %s",
+	v4l2_dbg(1, debug, sd, "Current STD: %s\n",
 			decoder->std_list[current_std].standard.name);
 	return 0;
 }
@@ -614,7 +593,7 @@
 	decoder->tvp514x_regs[REG_VIDEO_STD].val =
 		decoder->std_list[i].video_std;
 
-	v4l2_dbg(1, debug, sd, "Standard set to: %s",
+	v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
 			decoder->std_list[i].standard.name);
 	return 0;
 }
@@ -637,7 +616,6 @@
 	int err;
 	enum tvp514x_input input_sel;
 	enum tvp514x_output output_sel;
-	enum tvp514x_std current_std = STD_INVALID;
 	u8 sync_lock_status, lock_mask;
 	int try_count = LOCK_RETRY_COUNT;
 
@@ -721,11 +699,6 @@
 		/* Allow decoder to sync up with new input */
 		msleep(LOCK_RETRY_DELAY);
 
-		/* get the current standard for future reference */
-		current_std = tvp514x_get_current_std(sd);
-		if (current_std == STD_INVALID)
-			continue;
-
 		sync_lock_status = tvp514x_read_reg(sd,
 				REG_STATUS1);
 		if (lock_mask == (sync_lock_status & lock_mask))
@@ -733,15 +706,13 @@
 			break;
 	}
 
-	if ((current_std == STD_INVALID) || (try_count < 0))
+	if (try_count < 0)
 		return -EINVAL;
 
-	decoder->current_std = current_std;
 	decoder->input = input;
 	decoder->output = output;
 
-	v4l2_dbg(1, debug, sd, "Input set to: %d, std : %d",
-			input_sel, current_std);
+	v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
 
 	return 0;
 }
@@ -794,7 +765,7 @@
 		return err;
 	}
 
-	v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d",
+	v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d\n",
 			qctrl->name, qctrl->minimum, qctrl->maximum,
 			qctrl->default_value);
 
@@ -851,7 +822,7 @@
 		return -EINVAL;
 	}
 
-	v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d\n",
 			ctrl->id, ctrl->value);
 	return 0;
 }
@@ -951,7 +922,7 @@
 		return err;
 	}
 
-	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
 			ctrl->id, ctrl->value);
 
 	return err;
@@ -967,44 +938,33 @@
 static int
 tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
 {
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int index;
-
-	if (fmt == NULL)
-		return -EINVAL;
-
-	index = fmt->index;
-	if ((index >= decoder->num_fmts) || (index < 0))
-		/* Index out of bound */
+	if (fmt == NULL || fmt->index)
 		return -EINVAL;
 
 	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		/* only capture is supported */
 		return -EINVAL;
 
-	memcpy(fmt, &decoder->fmt_list[index],
-		sizeof(struct v4l2_fmtdesc));
-
-	v4l2_dbg(1, debug, sd, "Current FMT: index - %d (%s)",
-			decoder->fmt_list[index].index,
-			decoder->fmt_list[index].description);
+	/* only one format */
+	fmt->flags = 0;
+	strlcpy(fmt->description, "8-bit UYVY 4:2:2 Format",
+					sizeof(fmt->description));
+	fmt->pixelformat = V4L2_PIX_FMT_UYVY;
 	return 0;
 }
 
 /**
- * tvp514x_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
+ * tvp514x_fmt_cap() - V4L2 decoder interface handler for try/s/g_fmt
  * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
  *
- * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
- * ioctl is used to negotiate the image capture size and pixel format
- * without actually making it take effect.
+ * Implement the VIDIOC_TRY/S/G_FMT ioctl for the CAPTURE buffer type. This
+ * ioctl is used to negotiate the image capture size and pixel format.
  */
 static int
-tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
+tvp514x_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int ifmt;
 	struct v4l2_pix_format *pix;
 	enum tvp514x_std current_std;
 
@@ -1012,106 +972,30 @@
 		return -EINVAL;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		return -EINVAL;
 
 	pix = &f->fmt.pix;
 
 	/* Calculate height and width based on current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
+	current_std = decoder->current_std;
 
-	decoder->current_std = current_std;
+	pix->pixelformat = V4L2_PIX_FMT_UYVY;
 	pix->width = decoder->std_list[current_std].width;
 	pix->height = decoder->std_list[current_std].height;
-
-	for (ifmt = 0; ifmt < decoder->num_fmts; ifmt++) {
-		if (pix->pixelformat ==
-			decoder->fmt_list[ifmt].pixelformat)
-			break;
-	}
-	if (ifmt == decoder->num_fmts)
-		/* None of the format matched, select default */
-		ifmt = 0;
-	pix->pixelformat = decoder->fmt_list[ifmt].pixelformat;
-
 	pix->field = V4L2_FIELD_INTERLACED;
 	pix->bytesperline = pix->width * 2;
 	pix->sizeimage = pix->bytesperline * pix->height;
 	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	pix->priv = 0;
 
-	v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
-			"Width - %d, Height - %d",
-			decoder->fmt_list[ifmt].description, pix->bytesperline,
+	v4l2_dbg(1, debug, sd, "FMT: bytesperline - %d"
+			"Width - %d, Height - %d\n",
+			pix->bytesperline,
 			pix->width, pix->height);
 	return 0;
 }
 
 /**
- * tvp514x_s_fmt_cap() - V4L2 decoder interface handler for s_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
- *
- * If the requested format is supported, configures the HW to use that
- * format, returns error code if format not supported or HW can't be
- * correctly configured.
- */
-static int
-tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	struct v4l2_pix_format *pix;
-	int rval;
-
-	if (f == NULL)
-		return -EINVAL;
-
-	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	pix = &f->fmt.pix;
-	rval = tvp514x_try_fmt_cap(sd, f);
-	if (rval)
-		return rval;
-
-		decoder->pix = *pix;
-
-	return rval;
-}
-
-/**
- * tvp514x_g_fmt_cap() - V4L2 decoder interface handler for tvp514x_g_fmt_cap
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to standard V4L2 v4l2_format structure
- *
- * Returns the decoder's current pixel format in the v4l2_format
- * parameter.
- */
-static int
-tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-
-	if (f == NULL)
-		return -EINVAL;
-
-	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	f->fmt.pix = decoder->pix;
-
-	v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
-			"Width - %d, Height - %d",
-			decoder->pix.bytesperline,
-			decoder->pix.width, decoder->pix.height);
-	return 0;
-}
-
-/**
  * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
  * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
@@ -1132,15 +1016,8 @@
 		/* only capture is supported */
 		return -EINVAL;
 
-	memset(a, 0, sizeof(*a));
-	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
-
-	decoder->current_std = current_std;
+	current_std = decoder->current_std;
 
 	cparm = &a->parm.capture;
 	cparm->capability = V4L2_CAP_TIMEPERFRAME;
@@ -1175,11 +1052,7 @@
 	timeperframe = &a->parm.capture.timeperframe;
 
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(sd);
-	if (current_std == STD_INVALID)
-		return -EINVAL;
-
-	decoder->current_std = current_std;
+	current_std = decoder->current_std;
 
 	*timeperframe =
 	    decoder->std_list[current_std].standard.frameperiod;
@@ -1259,9 +1132,9 @@
 	.s_routing = tvp514x_s_routing,
 	.querystd = tvp514x_querystd,
 	.enum_fmt = tvp514x_enum_fmt_cap,
-	.g_fmt = tvp514x_g_fmt_cap,
-	.try_fmt = tvp514x_try_fmt_cap,
-	.s_fmt = tvp514x_s_fmt_cap,
+	.g_fmt = tvp514x_fmt_cap,
+	.try_fmt = tvp514x_fmt_cap,
+	.s_fmt = tvp514x_fmt_cap,
 	.g_parm = tvp514x_g_parm,
 	.s_parm = tvp514x_s_parm,
 	.s_stream = tvp514x_s_stream,
@@ -1274,22 +1147,6 @@
 
 static struct tvp514x_decoder tvp514x_dev = {
 	.streaming = 0,
-
-	.fmt_list = tvp514x_fmt_list,
-	.num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
-
-	.pix = {
-		/* Default to NTSC 8-bit YUV 422 */
-		.width = NTSC_NUM_ACTIVE_PIXELS,
-		.height = NTSC_NUM_ACTIVE_LINES,
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-		.field = V4L2_FIELD_INTERLACED,
-		.bytesperline = NTSC_NUM_ACTIVE_PIXELS * 2,
-		.sizeimage =
-		NTSC_NUM_ACTIVE_PIXELS * 2 * NTSC_NUM_ACTIVE_LINES,
-		.colorspace = V4L2_COLORSPACE_SMPTE170M,
-		},
-
 	.current_std = STD_NTSC_MJ,
 	.std_list = tvp514x_std_list,
 	.num_stds = ARRAY_SIZE(tvp514x_std_list),
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 47f0582..1654f65 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -934,17 +934,6 @@
 	return 0;
 }
 
-static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		return tvp5150_s_sliced_fmt(sd, &fmt->fmt.sliced);
-
-	default:
-		return -EINVAL;
-	}
-}
-
 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
 {
 	int i, mask = 0;
@@ -960,13 +949,6 @@
 	return 0;
 }
 
-static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
-{
-	if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-		return -EINVAL;
-	return tvp5150_g_sliced_fmt(sd, &fmt->fmt.sliced);
-}
-
 static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *chip)
 {
@@ -1054,8 +1036,6 @@
 
 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
 	.s_routing = tvp5150_s_routing,
-	.g_fmt = tvp5150_g_fmt,
-	.s_fmt = tvp5150_s_fmt,
 };
 
 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 6eb3395..445dc93 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -903,7 +903,7 @@
 #endif
 };
 
-static int tw9910_enum_fmt(struct v4l2_subdev *sd, int index,
+static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 			   enum v4l2_mbus_pixelcode *code)
 {
 	if (index)
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 6248a63..c2690df 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1671,8 +1671,7 @@
 	PDEBUG(DBG_PROBE, "");
 
 	if (usbvision == NULL) {
-		dev_err(&usbvision->dev->dev,
-			"%s: usb_get_intfdata() failed\n", __func__);
+		pr_err("%s: usb_get_intfdata() failed\n", __func__);
 		return;
 	}
 
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index aa0720a..27a79f0 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -122,8 +122,8 @@
 		.selector	= UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
 		.index		= 10,
 		.size		= 1,
-		.flags		= UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE
-				| UVC_CONTROL_RESTORE,
+		.flags		= UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR
+				| UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE,
 	},
 	{
 		.entity		= UVC_GUID_UVC_PROCESSING,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 26386a9..9b089df 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -353,6 +353,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmware_balloon.
 
+config ARM_CHARLCD
+	bool "ARM Ltd. Character LCD Driver"
+	depends on PLAT_VERSATILE
+	help
+	  This is a driver for the character LCD found on the ARM Ltd.
+	  Versatile and RealView Platform Baseboards. It doesn't do
+	  very much more than display the text "ARM Linux" on the first
+	  line and the Linux version on the second line, but that's
+	  still useful.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6ed06a1..67552d6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,3 +31,4 @@
 obj-y				+= eeprom/
 obj-y				+= cb710/
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
+obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
new file mode 100644
index 0000000..9e3879e
--- /dev/null
+++ b/drivers/misc/arm-charlcd.c
@@ -0,0 +1,396 @@
+/*
+ * Driver for the on-board character LCD found on some ARM reference boards
+ * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it
+ * http://en.wikipedia.org/wiki/HD44780_Character_LCD
+ * Currently it will just display the text "ARM Linux" and the linux version
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <generated/utsrelease.h>
+
+#define DRIVERNAME "arm-charlcd"
+#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000))
+
+/* Offsets to registers */
+#define CHAR_COM	0x00U
+#define CHAR_DAT	0x04U
+#define CHAR_RD		0x08U
+#define CHAR_RAW	0x0CU
+#define CHAR_MASK	0x10U
+#define CHAR_STAT	0x14U
+
+#define CHAR_RAW_CLEAR	0x00000000U
+#define CHAR_RAW_VALID	0x00000100U
+
+/* Hitachi HD44780 display commands */
+#define HD_CLEAR			0x01U
+#define HD_HOME				0x02U
+#define HD_ENTRYMODE			0x04U
+#define HD_ENTRYMODE_INCREMENT		0x02U
+#define HD_ENTRYMODE_SHIFT		0x01U
+#define HD_DISPCTRL			0x08U
+#define HD_DISPCTRL_ON			0x04U
+#define HD_DISPCTRL_CURSOR_ON		0x02U
+#define HD_DISPCTRL_CURSOR_BLINK	0x01U
+#define HD_CRSR_SHIFT			0x10U
+#define HD_CRSR_SHIFT_DISPLAY		0x08U
+#define HD_CRSR_SHIFT_DISPLAY_RIGHT	0x04U
+#define HD_FUNCSET			0x20U
+#define HD_FUNCSET_8BIT			0x10U
+#define HD_FUNCSET_2_LINES		0x08U
+#define HD_FUNCSET_FONT_5X10		0x04U
+#define HD_SET_CGRAM			0x40U
+#define HD_SET_DDRAM			0x80U
+#define HD_BUSY_FLAG			0x80U
+
+/**
+ * @dev: a pointer back to containing device
+ * @phybase: the offset to the controller in physical memory
+ * @physize: the size of the physical page
+ * @virtbase: the offset to the controller in virtual memory
+ * @irq: reserved interrupt number
+ * @complete: completion structure for the last LCD command
+ */
+struct charlcd {
+	struct device *dev;
+	u32 phybase;
+	u32 physize;
+	void __iomem *virtbase;
+	int irq;
+	struct completion complete;
+	struct delayed_work init_work;
+};
+
+static irqreturn_t charlcd_interrupt(int irq, void *data)
+{
+	struct charlcd *lcd = data;
+	u8 status;
+
+	status = readl(lcd->virtbase + CHAR_STAT) & 0x01;
+	/* Clear IRQ */
+	writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	if (status)
+		complete(&lcd->complete);
+	else
+		dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status);
+	return IRQ_HANDLED;
+}
+
+
+static void charlcd_wait_complete_irq(struct charlcd *lcd)
+{
+	int ret;
+
+	ret = wait_for_completion_interruptible_timeout(&lcd->complete,
+							CHARLCD_TIMEOUT);
+	/* Disable IRQ after completion */
+	writel(0x00, lcd->virtbase + CHAR_MASK);
+
+	if (ret < 0) {
+		dev_err(lcd->dev,
+			"wait_for_completion_interruptible_timeout() "
+			"returned %d waiting for ready\n", ret);
+		return;
+	}
+
+	if (ret == 0) {
+		dev_err(lcd->dev, "charlcd controller timed out "
+			"waiting for ready\n");
+		return;
+	}
+}
+
+static u8 charlcd_4bit_read_char(struct charlcd *lcd)
+{
+	u8 data;
+	u32 val;
+	int i;
+
+	/* If we can, use an IRQ to wait for the data, else poll */
+	if (lcd->irq >= 0)
+		charlcd_wait_complete_irq(lcd);
+	else {
+		i = 0;
+		val = 0;
+		while (!(val & CHAR_RAW_VALID) && i < 10) {
+			udelay(100);
+			val = readl(lcd->virtbase + CHAR_RAW);
+			i++;
+		}
+
+		writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	}
+	msleep(1);
+
+	/* Read the 4 high bits of the data */
+	data = readl(lcd->virtbase + CHAR_RD) & 0xf0;
+
+	/*
+	 * The second read for the low bits does not trigger an IRQ
+	 * so in this case we have to poll for the 4 lower bits
+	 */
+	i = 0;
+	val = 0;
+	while (!(val & CHAR_RAW_VALID) && i < 10) {
+		udelay(100);
+		val = readl(lcd->virtbase + CHAR_RAW);
+		i++;
+	}
+	writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+	msleep(1);
+
+	/* Read the 4 low bits of the data */
+	data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f;
+
+	return data;
+}
+
+static bool charlcd_4bit_read_bf(struct charlcd *lcd)
+{
+	if (lcd->irq >= 0) {
+		/*
+		 * If we'll use IRQs to wait for the busyflag, clear any
+		 * pending flag and enable IRQ
+		 */
+		writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+		init_completion(&lcd->complete);
+		writel(0x01, lcd->virtbase + CHAR_MASK);
+	}
+	readl(lcd->virtbase + CHAR_COM);
+	return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false;
+}
+
+static void charlcd_4bit_wait_busy(struct charlcd *lcd)
+{
+	int retries = 50;
+
+	udelay(100);
+	while (charlcd_4bit_read_bf(lcd) && retries)
+		retries--;
+	if (!retries)
+		dev_err(lcd->dev, "timeout waiting for busyflag\n");
+}
+
+static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd)
+{
+	u32 cmdlo = (cmd << 4) & 0xf0;
+	u32 cmdhi = (cmd & 0xf0);
+
+	writel(cmdhi, lcd->virtbase + CHAR_COM);
+	udelay(10);
+	writel(cmdlo, lcd->virtbase + CHAR_COM);
+	charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_char(struct charlcd *lcd, u8 ch)
+{
+	u32 chlo = (ch << 4) & 0xf0;
+	u32 chhi = (ch & 0xf0);
+
+	writel(chhi, lcd->virtbase + CHAR_DAT);
+	udelay(10);
+	writel(chlo, lcd->virtbase + CHAR_DAT);
+	charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str)
+{
+	u8 offset;
+	int i;
+
+	/*
+	 * We support line 0, 1
+	 * Line 1 runs from 0x00..0x27
+	 * Line 2 runs from 0x28..0x4f
+	 */
+	if (line == 0)
+		offset = 0;
+	else if (line == 1)
+		offset = 0x28;
+	else
+		return;
+
+	/* Set offset */
+	charlcd_4bit_command(lcd, HD_SET_DDRAM | offset);
+
+	/* Send string */
+	for (i = 0; i < strlen(str) && i < 0x28; i++)
+		charlcd_4bit_char(lcd, str[i]);
+}
+
+static void charlcd_4bit_init(struct charlcd *lcd)
+{
+	/* These commands cannot be checked with the busy flag */
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	msleep(5);
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	/* Go to 4bit mode */
+	writel(HD_FUNCSET, lcd->virtbase + CHAR_COM);
+	udelay(100);
+	/*
+	 * 4bit mode, 2 lines, 5x8 font, after this the number of lines
+	 * and the font cannot be changed until the next initialization sequence
+	 */
+	charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES);
+	charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+	charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT);
+	charlcd_4bit_command(lcd, HD_CLEAR);
+	charlcd_4bit_command(lcd, HD_HOME);
+	/* Put something useful in the display */
+	charlcd_4bit_print(lcd, 0, "ARM Linux");
+	charlcd_4bit_print(lcd, 1, UTS_RELEASE);
+}
+
+static void charlcd_init_work(struct work_struct *work)
+{
+	struct charlcd *lcd =
+		container_of(work, struct charlcd, init_work.work);
+
+	charlcd_4bit_init(lcd);
+}
+
+static int __init charlcd_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct charlcd *lcd;
+	struct resource *res;
+
+	lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL);
+	if (!lcd)
+		return -ENOMEM;
+
+	lcd->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto out_no_resource;
+	}
+	lcd->phybase = res->start;
+	lcd->physize = resource_size(res);
+
+	if (request_mem_region(lcd->phybase, lcd->physize,
+			       DRIVERNAME) == NULL) {
+		ret = -EBUSY;
+		goto out_no_memregion;
+	}
+
+	lcd->virtbase = ioremap(lcd->phybase, lcd->physize);
+	if (!lcd->virtbase) {
+		ret = -ENOMEM;
+		goto out_no_remap;
+	}
+
+	lcd->irq = platform_get_irq(pdev, 0);
+	/* If no IRQ is supplied, we'll survive without it */
+	if (lcd->irq >= 0) {
+		if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED,
+				DRIVERNAME, lcd)) {
+			ret = -EIO;
+			goto out_no_irq;
+		}
+	}
+
+	platform_set_drvdata(pdev, lcd);
+
+	/*
+	 * Initialize the display in a delayed work, because
+	 * it is VERY slow and would slow down the boot of the system.
+	 */
+	INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
+	schedule_delayed_work(&lcd->init_work, 0);
+
+	dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+		lcd->phybase);
+
+	return 0;
+
+out_no_irq:
+	iounmap(lcd->virtbase);
+out_no_remap:
+	platform_set_drvdata(pdev, NULL);
+out_no_memregion:
+	release_mem_region(lcd->phybase, SZ_4K);
+out_no_resource:
+	kfree(lcd);
+	return ret;
+}
+
+static int __exit charlcd_remove(struct platform_device *pdev)
+{
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	if (lcd) {
+		free_irq(lcd->irq, lcd);
+		iounmap(lcd->virtbase);
+		release_mem_region(lcd->phybase, lcd->physize);
+		platform_set_drvdata(pdev, NULL);
+		kfree(lcd);
+	}
+
+	return 0;
+}
+
+static int charlcd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	/* Power the display off */
+	charlcd_4bit_command(lcd, HD_DISPCTRL);
+	return 0;
+}
+
+static int charlcd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct charlcd *lcd = platform_get_drvdata(pdev);
+
+	/* Turn the display back on */
+	charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+	return 0;
+}
+
+static const struct dev_pm_ops charlcd_pm_ops = {
+	.suspend = charlcd_suspend,
+	.resume = charlcd_resume,
+};
+
+static struct platform_driver charlcd_driver = {
+	.driver = {
+		.name = DRIVERNAME,
+		.owner = THIS_MODULE,
+		.pm = &charlcd_pm_ops,
+	},
+	.remove = __exit_p(charlcd_remove),
+};
+
+static int __init charlcd_init(void)
+{
+	return platform_driver_probe(&charlcd_driver, charlcd_probe);
+}
+
+static void __exit charlcd_exit(void)
+{
+	platform_driver_unregister(&charlcd_driver);
+}
+
+module_init(charlcd_init);
+module_exit(charlcd_exit);
+
+MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>");
+MODULE_DESCRIPTION("ARM Character LCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 9bec24d..2d44b33 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -366,6 +366,6 @@
 
 module_init(cs5535_mfgpt_init);
 
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
index db9cd02..2a1e804 100644
--- a/drivers/misc/vmware_balloon.c
+++ b/drivers/misc/vmware_balloon.c
@@ -45,7 +45,7 @@
 
 MODULE_AUTHOR("VMware, Inc.");
 MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
 MODULE_ALIAS("dmi:*:svnVMware*:*");
 MODULE_ALIAS("vmware_vmmemctl");
 MODULE_LICENSE("GPL");
@@ -101,6 +101,8 @@
 /* Maximum number of page allocations without yielding processor */
 #define VMW_BALLOON_YIELD_THRESHOLD	1024
 
+/* Maximum number of refused pages we accumulate during inflation cycle */
+#define VMW_BALLOON_MAX_REFUSED		16
 
 /*
  * Hypervisor communication port definitions.
@@ -183,6 +185,7 @@
 
 	/* transient list of non-balloonable pages */
 	struct list_head refused_pages;
+	unsigned int n_refused_pages;
 
 	/* balloon size in pages */
 	unsigned int size;
@@ -428,14 +431,21 @@
 		/* inform monitor */
 		locked = vmballoon_send_lock_page(b, page_to_pfn(page));
 		if (!locked) {
+			STATS_INC(b->stats.refused_alloc);
+
 			if (b->reset_required) {
 				__free_page(page);
 				return -EIO;
 			}
 
-			/* place on list of non-balloonable pages, retry allocation */
+			/*
+			 * Place page on the list of non-balloonable pages
+			 * and retry allocation, unless we already accumulated
+			 * too many of them, in which case take a breather.
+			 */
 			list_add(&page->lru, &b->refused_pages);
-			STATS_INC(b->stats.refused_alloc);
+			if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED)
+				return -EIO;
 		}
 	} while (!locked);
 
@@ -483,6 +493,8 @@
 		__free_page(page);
 		STATS_INC(b->stats.refused_free);
 	}
+
+	b->n_refused_pages = 0;
 }
 
 /*
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e171e77..f06d06e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -249,7 +249,7 @@
 
 config MMC_MSM7X00A
 	tristate "Qualcomm MSM 7X00A SDCC Controller Support"
-	depends on MMC && ARCH_MSM
+	depends on MMC && ARCH_MSM && !ARCH_MSM7X30
 	help
 	  This provides support for the SD/MMC cell found in the
           MSM 7X00A controllers from Qualcomm.
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 4917af9..840b301 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -26,7 +26,6 @@
 #include <linux/amba/mmci.h>
 #include <linux/regulator/consumer.h>
 
-#include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -37,12 +36,39 @@
 
 static unsigned int fmax = 515633;
 
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ */
+struct variant_data {
+	unsigned int		clkreg;
+	unsigned int		clkreg_enable;
+	unsigned int		datalength_bits;
+};
+
+static struct variant_data variant_arm = {
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_u300 = {
+	.clkreg_enable		= 1 << 13, /* HWFCEN */
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_ux500 = {
+	.clkreg			= MCI_CLK_ENABLE,
+	.clkreg_enable		= 1 << 14, /* HWFCEN */
+	.datalength_bits	= 24,
+};
 /*
  * This must be called with host->lock held
  */
 static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 {
-	u32 clk = 0;
+	struct variant_data *variant = host->variant;
+	u32 clk = variant->clkreg;
 
 	if (desired) {
 		if (desired >= host->mclk) {
@@ -54,8 +80,8 @@
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == AMBA_VENDOR_ST)
-			clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
+
+		clk |= variant->clkreg_enable;
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
 		/* clk |= MCI_CLK_PWRSAVE; */
@@ -98,6 +124,18 @@
 	host->data = NULL;
 }
 
+static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
+{
+	unsigned int flags = SG_MITER_ATOMIC;
+
+	if (data->flags & MMC_DATA_READ)
+		flags |= SG_MITER_TO_SG;
+	else
+		flags |= SG_MITER_FROM_SG;
+
+	sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
 	unsigned int datactrl, timeout, irqmask;
@@ -109,7 +147,7 @@
 		data->blksz, data->blocks, data->flags);
 
 	host->data = data;
-	host->size = data->blksz;
+	host->size = data->blksz * data->blocks;
 	host->data_xfered = 0;
 
 	mmci_init_sg(host, data);
@@ -210,8 +248,17 @@
 		 * We hit an error condition.  Ensure that any data
 		 * partially written to a page is properly coherent.
 		 */
-		if (host->sg_len && data->flags & MMC_DATA_READ)
-			flush_dcache_page(sg_page(host->sg_ptr));
+		if (data->flags & MMC_DATA_READ) {
+			struct sg_mapping_iter *sg_miter = &host->sg_miter;
+			unsigned long flags;
+
+			local_irq_save(flags);
+			if (sg_miter_next(sg_miter)) {
+				flush_dcache_page(sg_miter->page);
+				sg_miter_stop(sg_miter);
+			}
+			local_irq_restore(flags);
+		}
 	}
 	if (status & MCI_DATAEND) {
 		mmci_stop_data(host);
@@ -314,15 +361,18 @@
 static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 {
 	struct mmci_host *host = dev_id;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
 	void __iomem *base = host->base;
+	unsigned long flags;
 	u32 status;
 
 	status = readl(base + MMCISTATUS);
 
 	dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
 
+	local_irq_save(flags);
+
 	do {
-		unsigned long flags;
 		unsigned int remain, len;
 		char *buffer;
 
@@ -336,11 +386,11 @@
 		if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
 			break;
 
-		/*
-		 * Map the current scatter buffer.
-		 */
-		buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
-		remain = host->sg_ptr->length - host->sg_off;
+		if (!sg_miter_next(sg_miter))
+			break;
+
+		buffer = sg_miter->addr;
+		remain = sg_miter->length;
 
 		len = 0;
 		if (status & MCI_RXACTIVE)
@@ -348,31 +398,24 @@
 		if (status & MCI_TXACTIVE)
 			len = mmci_pio_write(host, buffer, remain, status);
 
-		/*
-		 * Unmap the buffer.
-		 */
-		mmci_kunmap_atomic(host, buffer, &flags);
+		sg_miter->consumed = len;
 
-		host->sg_off += len;
 		host->size -= len;
 		remain -= len;
 
 		if (remain)
 			break;
 
-		/*
-		 * If we were reading, and we have completed this
-		 * page, ensure that the data cache is coherent.
-		 */
 		if (status & MCI_RXACTIVE)
-			flush_dcache_page(sg_page(host->sg_ptr));
-
-		if (!mmci_next_sg(host))
-			break;
+			flush_dcache_page(sg_miter->page);
 
 		status = readl(base + MMCISTATUS);
 	} while (1);
 
+	sg_miter_stop(sg_miter);
+
+	local_irq_restore(flags);
+
 	/*
 	 * If we're nearing the end of the read, switch to
 	 * "any data available" mode.
@@ -477,16 +520,9 @@
 			/* This implicitly enables the regulator */
 			mmc_regulator_set_ocr(host->vcc, ios->vdd);
 #endif
-		/*
-		 * The translate_vdd function is not used if you have
-		 * an external regulator, or your design is really weird.
-		 * Using it would mean sending in power control BOTH using
-		 * a regulator AND the 4 MMCIPWR bits. If we don't have
-		 * a regulator, we might have some other platform specific
-		 * power control behind this translate function.
-		 */
-		if (!host->vcc && host->plat->translate_vdd)
-			pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+		if (host->plat->vdd_handler)
+			pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
+						       ios->power_mode);
 		/* The ST version does not have this, fall through to POWER_ON */
 		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
@@ -539,9 +575,13 @@
 	if (host->gpio_cd == -ENOSYS)
 		status = host->plat->status(mmc_dev(host->mmc));
 	else
-		status = gpio_get_value(host->gpio_cd);
+		status = !gpio_get_value(host->gpio_cd);
 
-	return !status;
+	/*
+	 * Use positive logic throughout - status is zero for no card,
+	 * non-zero for card inserted.
+	 */
+	return status;
 }
 
 static const struct mmc_host_ops mmci_ops = {
@@ -551,21 +591,10 @@
 	.get_cd		= mmci_get_cd,
 };
 
-static void mmci_check_status(unsigned long data)
-{
-	struct mmci_host *host = (struct mmci_host *)data;
-	unsigned int status = mmci_get_cd(host->mmc);
-
-	if (status ^ host->oldstat)
-		mmc_detect_change(host->mmc, 0);
-
-	host->oldstat = status;
-	mod_timer(&host->timer, jiffies + HZ);
-}
-
 static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct mmci_platform_data *plat = dev->dev.platform_data;
+	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
@@ -609,6 +638,7 @@
 		goto clk_free;
 
 	host->plat = plat;
+	host->variant = variant;
 	host->mclk = clk_get_rate(host->clk);
 	/*
 	 * According to the spec, mclk is max 100 MHz,
@@ -669,6 +699,7 @@
 	if (host->vcc == NULL)
 		mmc->ocr_avail = plat->ocr_mask;
 	mmc->caps = plat->capabilities;
+	mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/*
 	 * We can do SGIO
@@ -677,10 +708,11 @@
 	mmc->max_phys_segs = NR_SG;
 
 	/*
-	 * Since we only have a 16-bit data length register, we must
-	 * ensure that we don't exceed 2^16-1 bytes in a single request.
+	 * Since only a certain number of bits are valid in the data length
+	 * register, we must ensure that we don't exceed 2^num-1 bytes in a
+	 * single request.
 	 */
-	mmc->max_req_size = 65535;
+	mmc->max_req_size = (1 << variant->datalength_bits) - 1;
 
 	/*
 	 * Set the maximum segment size.  Since we aren't doing DMA
@@ -734,7 +766,6 @@
 	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
-	host->oldstat = mmci_get_cd(host->mmc);
 
 	mmc_add_host(mmc);
 
@@ -742,12 +773,6 @@
 		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
 		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
 
-	init_timer(&host->timer);
-	host->timer.data = (unsigned long)host;
-	host->timer.function = mmci_check_status;
-	host->timer.expires = jiffies + HZ;
-	add_timer(&host->timer);
-
 	return 0;
 
  irq0_free:
@@ -781,8 +806,6 @@
 	if (mmc) {
 		struct mmci_host *host = mmc_priv(mmc);
 
-		del_timer_sync(&host->timer);
-
 		mmc_remove_host(mmc);
 
 		writel(0, host->base + MMCIMASK0);
@@ -856,19 +879,28 @@
 	{
 		.id	= 0x00041180,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	{
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	/* ST Micro variants */
 	{
 		.id     = 0x00180180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
 	},
 	{
 		.id     = 0x00280180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
+	},
+	{
+		.id     = 0x00480180,
+		.mask   = 0x00ffffff,
+		.data	= &variant_ux500,
 	},
 	{ 0, 0 },
 };
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d77062e..68970cf 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -28,8 +28,6 @@
 #define MCI_4BIT_BUS		(1 << 11)
 /* 8bit wide buses supported in ST Micro versions */
 #define MCI_ST_8BIT_BUS		(1 << 12)
-/* HW flow control on the ST Micro version */
-#define MCI_ST_FCEN		(1 << 13)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -145,6 +143,7 @@
 #define NR_SG		16
 
 struct clk;
+struct variant_data;
 
 struct mmci_host {
 	void __iomem		*base;
@@ -164,6 +163,7 @@
 	unsigned int		cclk;
 	u32			pwr;
 	struct mmci_platform_data *plat;
+	struct variant_data	*variant;
 
 	u8			hw_designer;
 	u8			hw_revision:4;
@@ -171,42 +171,9 @@
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
-	unsigned int		sg_len;
-
 	/* pio stuff */
-	struct scatterlist	*sg_ptr;
-	unsigned int		sg_off;
+	struct sg_mapping_iter	sg_miter;
 	unsigned int		size;
 	struct regulator	*vcc;
 };
 
-static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
-{
-	/*
-	 * Ideally, we want the higher levels to pass us a scatter list.
-	 */
-	host->sg_len = data->sg_len;
-	host->sg_ptr = data->sg;
-	host->sg_off = 0;
-}
-
-static inline int mmci_next_sg(struct mmci_host *host)
-{
-	host->sg_ptr++;
-	host->sg_off = 0;
-	return --host->sg_len;
-}
-
-static inline char *mmci_kmap_atomic(struct mmci_host *host, unsigned long *flags)
-{
-	struct scatterlist *sg = host->sg_ptr;
-
-	local_irq_save(*flags);
-	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
-}
-
-static inline void mmci_kunmap_atomic(struct mmci_host *host, void *buffer, unsigned long *flags)
-{
-	kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
-	local_irq_restore(*flags);
-}
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index d9d4a72..350f78e 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -119,6 +119,7 @@
 	int			detect_irq;
 	int			dma;
 	int			do_dma;
+	int			default_irq_mask;
 	int			use_sdio;
 	unsigned int		power_mode;
 	struct imxmmc_platform_data *pdata;
@@ -228,7 +229,7 @@
 static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
 		unsigned int cmdat)
 {
-	u32 int_cntr;
+	u32 int_cntr = host->default_irq_mask;
 	unsigned long flags;
 
 	WARN_ON(host->cmd != NULL);
@@ -275,7 +276,7 @@
 static void mxcmci_finish_request(struct mxcmci_host *host,
 		struct mmc_request *req)
 {
-	u32 int_cntr = 0;
+	u32 int_cntr = host->default_irq_mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
@@ -585,6 +586,9 @@
 		  (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
 		mxcmci_data_done(host, stat);
 #endif
+	if (host->default_irq_mask &&
+		  (stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL)))
+		mmc_detect_change(host->mmc, msecs_to_jiffies(200));
 	return IRQ_HANDLED;
 }
 
@@ -809,6 +813,12 @@
 	else
 		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
+	if (host->pdata && host->pdata->dat3_card_detect)
+		host->default_irq_mask =
+			INT_CARD_INSERTION_EN | INT_CARD_REMOVAL_EN;
+	else
+		host->default_irq_mask = 0;
+
 	host->res = r;
 	host->irq = irq;
 
@@ -835,7 +845,7 @@
 	/* recommended in data sheet */
 	writew(0x2db4, host->base + MMC_REG_READ_TO);
 
-	writel(0, host->base + MMC_REG_INT_CNTR);
+	writel(host->default_irq_mask, host->base + MMC_REG_INT_CNTR);
 
 #ifdef HAS_DMA
 	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
@@ -926,43 +936,47 @@
 }
 
 #ifdef CONFIG_PM
-static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+static int mxcmci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxcmci_host *host = mmc_priv(mmc);
 	int ret = 0;
 
 	if (mmc)
 		ret = mmc_suspend_host(mmc);
+	clk_disable(host->clk);
 
 	return ret;
 }
 
-static int mxcmci_resume(struct platform_device *dev)
+static int mxcmci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct mxcmci_host *host;
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct mxcmci_host *host = mmc_priv(mmc);
 	int ret = 0;
 
-	if (mmc) {
-		host = mmc_priv(mmc);
+	clk_enable(host->clk);
+	if (mmc)
 		ret = mmc_resume_host(mmc);
-	}
 
 	return ret;
 }
-#else
-#define mxcmci_suspend  NULL
-#define mxcmci_resume   NULL
-#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops mxcmci_pm_ops = {
+	.suspend	= mxcmci_suspend,
+	.resume		= mxcmci_resume,
+};
+#endif
 
 static struct platform_driver mxcmci_driver = {
 	.probe		= mxcmci_probe,
 	.remove		= mxcmci_remove,
-	.suspend	= mxcmci_suspend,
-	.resume		= mxcmci_resume,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.owner		= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &mxcmci_pm_ops,
+#endif
 	}
 };
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 2b281680..d98ddcf 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1157,7 +1157,6 @@
 	mmc_omap_start_command(host, req->cmd);
 	if (host->dma_in_use)
 		omap_start_dma(host->dma_ch);
-	BUG_ON(irqs_disabled());
 }
 
 static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index af21792..ad30f07 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -365,6 +365,26 @@
 
 static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 {
+	struct sdhci_host *host =  platform_get_drvdata(pdev);
+	struct sdhci_s3c *sc = sdhci_priv(host);
+	int ptr;
+
+	sdhci_remove_host(host, 1);
+
+	for (ptr = 0; ptr < 3; ptr++) {
+		clk_disable(sc->clk_bus[ptr]);
+		clk_put(sc->clk_bus[ptr]);
+	}
+	clk_disable(sc->clk_io);
+	clk_put(sc->clk_io);
+
+	iounmap(host->ioaddr);
+	release_resource(sc->ioarea);
+	kfree(sc->ioarea);
+
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index eb97830..5d3f824 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -30,25 +30,6 @@
 #define DRIVER_NAME	"sh_mmcif"
 #define DRIVER_VERSION	"2010-04-28"
 
-#define MMCIF_CE_CMD_SET	0x00000000
-#define MMCIF_CE_ARG		0x00000008
-#define MMCIF_CE_ARG_CMD12	0x0000000C
-#define MMCIF_CE_CMD_CTRL	0x00000010
-#define MMCIF_CE_BLOCK_SET	0x00000014
-#define MMCIF_CE_CLK_CTRL	0x00000018
-#define MMCIF_CE_BUF_ACC	0x0000001C
-#define MMCIF_CE_RESP3		0x00000020
-#define MMCIF_CE_RESP2		0x00000024
-#define MMCIF_CE_RESP1		0x00000028
-#define MMCIF_CE_RESP0		0x0000002C
-#define MMCIF_CE_RESP_CMD12	0x00000030
-#define MMCIF_CE_DATA		0x00000034
-#define MMCIF_CE_INT		0x00000040
-#define MMCIF_CE_INT_MASK	0x00000044
-#define MMCIF_CE_HOST_STS1	0x00000048
-#define MMCIF_CE_HOST_STS2	0x0000004C
-#define MMCIF_CE_VERSION	0x0000007C
-
 /* CE_CMD_SET */
 #define CMD_MASK		0x3f000000
 #define CMD_SET_RTYP_NO		((0 << 23) | (0 << 22))
@@ -207,27 +188,17 @@
 	wait_queue_head_t intr_wait;
 };
 
-static inline u32 sh_mmcif_readl(struct sh_mmcif_host *host, unsigned int reg)
-{
-	return readl(host->addr + reg);
-}
-
-static inline void sh_mmcif_writel(struct sh_mmcif_host *host,
-					unsigned int reg, u32 val)
-{
-	writel(val, host->addr + reg);
-}
 
 static inline void sh_mmcif_bitset(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(val | sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(val | readl(host->addr + reg), host->addr + reg);
 }
 
 static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
 {
-	writel(~val & sh_mmcif_readl(host, reg), host->addr + reg);
+	writel(~val & readl(host->addr + reg), host->addr + reg);
 }
 
 
@@ -253,10 +224,10 @@
 {
 	u32 tmp;
 
-	tmp = 0x010f0000 & sh_mmcif_readl(host, MMCIF_CE_CLK_CTRL);
+	tmp = 0x010f0000 & sh_mmcif_readl(host->addr, MMCIF_CE_CLK_CTRL);
 
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_ON);
-	sh_mmcif_writel(host, MMCIF_CE_VERSION, SOFT_RST_OFF);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF);
 	sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp |
 		SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 	/* byte swap on */
@@ -271,12 +242,10 @@
 	host->sd_error = 0;
 	host->wait_int = 0;
 
-	state1 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS1);
-	state2 = sh_mmcif_readl(host, MMCIF_CE_HOST_STS2);
-	pr_debug("%s: ERR HOST_STS1 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS1));
-	pr_debug("%s: ERR HOST_STS2 = %08x\n", \
-			DRIVER_NAME, sh_mmcif_readl(host, MMCIF_CE_HOST_STS2));
+	state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1);
+	state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2);
+	pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1);
+	pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2);
 
 	if (state1 & STS1_CMDSEQ) {
 		sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
@@ -288,7 +257,7 @@
 					"command sequence timeout err\n");
 				return -EIO;
 			}
-			if (!(sh_mmcif_readl(host, MMCIF_CE_HOST_STS1)
+			if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
 								& STS1_CMDSEQ))
 				break;
 			mdelay(1);
@@ -330,9 +299,9 @@
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+		*p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA);
 
 	/* buffer read end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
@@ -353,7 +322,8 @@
 	long time;
 	u32 blocksize, i, j, sec, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
 		host->wait_int = 0;
@@ -370,7 +340,8 @@
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				*p++ = sh_mmcif_readl(host, MMCIF_CE_DATA);
+				*p++ = sh_mmcif_readl(host->addr,
+						      MMCIF_CE_DATA);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -397,9 +368,9 @@
 
 	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
-			sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET)) + 3;
+			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
-		sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+		sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++);
 
 	/* buffer write end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
@@ -421,7 +392,8 @@
 	long time;
 	u32 i, sec, j, blocksize, *p;
 
-	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host, MMCIF_CE_BLOCK_SET);
+	blocksize = BLOCK_SIZE_MASK & sh_mmcif_readl(host->addr,
+						     MMCIF_CE_BLOCK_SET);
 
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
@@ -439,7 +411,8 @@
 
 			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
-				sh_mmcif_writel(host, MMCIF_CE_DATA, *p++);
+				sh_mmcif_writel(host->addr,
+						MMCIF_CE_DATA, *p++);
 		}
 		if (j < data->sg_len - 1)
 			data->sg++;
@@ -451,18 +424,18 @@
 						struct mmc_command *cmd)
 {
 	if (cmd->flags & MMC_RSP_136) {
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP3);
-		cmd->resp[1] = sh_mmcif_readl(host, MMCIF_CE_RESP2);
-		cmd->resp[2] = sh_mmcif_readl(host, MMCIF_CE_RESP1);
-		cmd->resp[3] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP3);
+		cmd->resp[1] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP2);
+		cmd->resp[2] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP1);
+		cmd->resp[3] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 	} else
-		cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP0);
+		cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0);
 }
 
 static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host,
 						struct mmc_command *cmd)
 {
-	cmd->resp[0] = sh_mmcif_readl(host, MMCIF_CE_RESP_CMD12);
+	cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP_CMD12);
 }
 
 static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
@@ -596,18 +569,19 @@
 		MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO;
 
 	if (host->data) {
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, 0);
-		sh_mmcif_writel(host, MMCIF_CE_BLOCK_SET, mrq->data->blksz);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0);
+		sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET,
+				mrq->data->blksz);
 	}
 	opc = sh_mmcif_set_cmd(host, mrq, cmd, opc);
 
-	sh_mmcif_writel(host, MMCIF_CE_INT, 0xD80430C0);
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, mask);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask);
 	/* set arg */
-	sh_mmcif_writel(host, MMCIF_CE_ARG, cmd->arg);
+	sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
 	host->wait_int = 0;
 	/* set cmd */
-	sh_mmcif_writel(host, MMCIF_CE_CMD_SET, opc);
+	sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
 
 	time = wait_event_interruptible_timeout(host->intr_wait,
 		host->wait_int == 1 || host->sd_error == 1, host->timeout);
@@ -752,43 +726,44 @@
 	u32 state = 0;
 	int err = 0;
 
-	state = sh_mmcif_readl(host, MMCIF_CE_INT);
+	state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
 
 	if (state & INT_RBSYE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~(INT_RBSYE | INT_CRSPE));
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+				~(INT_RBSYE | INT_CRSPE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MRBSYE);
 	} else if (state & INT_CRSPE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_CRSPE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_CRSPE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCRSPE);
 	} else if (state & INT_BUFREN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFREN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFREN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 	} else if (state & INT_BUFWEN) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFWEN);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFWEN);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 	} else if (state & INT_CMD12DRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 			~(INT_CMD12DRE | INT_CMD12RBE |
 			  INT_CMD12CRE | INT_BUFRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE);
 	} else if (state & INT_BUFRE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_BUFRE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
 	} else if (state & INT_DTRANE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~INT_DTRANE);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
 	} else if (state & INT_CMD12RBE) {
-		sh_mmcif_writel(host, MMCIF_CE_INT,
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT,
 				~(INT_CMD12RBE | INT_CMD12CRE));
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
 	} else if (state & INT_ERR_STS) {
 		/* err interrupts */
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	} else {
 		pr_debug("%s: Not support int\n", DRIVER_NAME);
-		sh_mmcif_writel(host, MMCIF_CE_INT, ~state);
+		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	}
@@ -894,12 +869,12 @@
 		goto clean_up2;
 	}
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 	sh_mmcif_detect(host->mmc);
 
 	pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
 	pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME,
-			sh_mmcif_readl(host, MMCIF_CE_VERSION) & 0x0000ffff);
+		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
 	return ret;
 
 clean_up2:
@@ -917,7 +892,7 @@
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
 	int irq[2];
 
-	sh_mmcif_writel(host, MMCIF_CE_INT_MASK, MASK_ALL);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 000d65e..91c8013 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -404,14 +404,9 @@
 	if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
 		return -EINVAL;
 
-	ops.oobbuf = kmalloc(length, GFP_KERNEL);
-	if (!ops.oobbuf)
-		return -ENOMEM;
-
-	if (copy_from_user(ops.oobbuf, ptr, length)) {
-		kfree(ops.oobbuf);
-		return -EFAULT;
-	}
+	ops.oobbuf = memdup_user(ptr, length);
+	if (IS_ERR(ops.oobbuf))
+		return PTR_ERR(ops.oobbuf);
 
 	start &= ~((uint64_t)mtd->oobsize - 1);
 	ret = mtd->write_oob(mtd, start, &ops);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 98a04b3..ffc3720 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,13 +1,3 @@
-menuconfig MTD_NAND
-	tristate "NAND Device Support"
-	depends on MTD
-	select MTD_NAND_IDS
-	select MTD_NAND_ECC
-	help
-	  This enables support for accessing all type of NAND flash
-	  devices. For further information see
-	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
-
 config MTD_NAND_ECC
 	tristate
 
@@ -19,6 +9,17 @@
 	  Software ECC according to the Smart Media Specification.
 	  The original Linux implementation had byte 0 and 1 swapped.
 
+
+menuconfig MTD_NAND
+	tristate "NAND Device Support"
+	depends on MTD
+	select MTD_NAND_IDS
+	select MTD_NAND_ECC
+	help
+	  This enables support for accessing all type of NAND flash
+	  devices. For further information see
+	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
 if MTD_NAND
 
 config MTD_NAND_VERIFY_WRITE
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 82e9438..0d76b16 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -623,8 +623,7 @@
 		else
 			host->buf_start = column + mtd->writesize;
 
-		if (mtd->writesize > 512)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
+		command = NAND_CMD_READ0; /* only READ0 is valid */
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -639,31 +638,11 @@
 		break;
 
 	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (mtd->writesize > 512)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
+		if (column >= mtd->writesize)
+			/* call ourself to read a page */
+			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
 
-			host->buf_start = column;
-
-			/* Set program pointer to spare region */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->buf_start = column;
-
-			/* Set program pointer to page start */
-			if (mtd->writesize == 512)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
+		host->buf_start = column;
 
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
@@ -853,6 +832,8 @@
 	    parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
 	if (nr_parts > 0)
 		add_mtd_partitions(mtd, host->parts, nr_parts);
+	else if (pdata->parts)
+		add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
 	{
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 78a4232..bcfc851 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -150,7 +150,6 @@
 	if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
 		pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
 			dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
-	complete(&dev->dma_done);
 }
 
 /*
@@ -182,6 +181,7 @@
 	/* Set dma direction */
 	dev->dma_dir = do_read;
 	dev->dma_stage = 1;
+	INIT_COMPLETION(dev->dma_done);
 
 	dbg_verbose("doing dma %s ", do_read ? "read" : "write");
 
@@ -494,6 +494,11 @@
 	if (dev->card_unstable)
 		return 0;
 
+	if (dev->dma_error) {
+		dev->dma_error = 0;
+		return -1;
+	}
+
 	r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
 	ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
 	r852_write_reg(dev, R852_CTL, dev->ctlreg);
@@ -707,6 +712,7 @@
 		container_of(work, struct r852_device, card_detect_work.work);
 
 	r852_card_update_present(dev);
+	r852_update_card_detect(dev);
 	dev->card_unstable = 0;
 
 	/* False alarm */
@@ -722,7 +728,6 @@
 	else
 		r852_unregister_nand_device(dev);
 exit:
-	/* Update detection logic */
 	r852_update_card_detect(dev);
 }
 
@@ -796,6 +801,7 @@
 		if (dma_status & R852_DMA_IRQ_ERROR) {
 			dbg("recieved dma error IRQ");
 			r852_dma_done(dev, -EIO);
+			complete(&dev->dma_done);
 			goto out;
 		}
 
@@ -825,8 +831,10 @@
 			r852_dma_enable(dev);
 
 		/* Operation done */
-		if (dev->dma_stage == 3)
+		if (dev->dma_stage == 3) {
 			r852_dma_done(dev, 0);
+			complete(&dev->dma_done);
+		}
 		goto out;
 	}
 
@@ -940,18 +948,19 @@
 
 	r852_dma_test(dev);
 
+	dev->irq = pci_dev->irq;
+	spin_lock_init(&dev->irqlock);
+
+	dev->card_detected = 0;
+	r852_card_update_present(dev);
+
 	/*register irq handler*/
 	error = -ENODEV;
 	if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
 			  DRV_NAME, dev))
 		goto error10;
 
-	dev->irq = pci_dev->irq;
-	spin_lock_init(&dev->irqlock);
-
 	/* kick initial present test */
-	dev->card_detected = 0;
-	r852_card_update_present(dev);
 	queue_delayed_work(dev->card_workqueue,
 		&dev->card_detect_work, 0);
 
@@ -1081,7 +1090,7 @@
 			dev->card_detected ? "added" : "removed");
 
 		queue_delayed_work(dev->card_workqueue,
-		&dev->card_detect_work, 1000);
+		&dev->card_detect_work, msecs_to_jiffies(1000));
 		return 0;
 	}
 
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 13b05cb..78ae894 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -593,6 +593,7 @@
 	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
 	ubi->max_ec = si->max_ec;
 	ubi->mean_ec = si->mean_ec;
+	ubi_msg("max. sequence number:       %llu", si->max_sqnum);
 
 	err = ubi_read_volume_table(ubi, si);
 	if (err)
@@ -981,7 +982,7 @@
 	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
-	ubi_msg("image sequence number: %d", ubi->image_seq);
+	ubi_msg("image sequence number:  %d", ubi->image_seq);
 
 	/*
 	 * The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 9f87c99..fe74749 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -418,7 +418,8 @@
 				 * may try to recover data. FIXME: but this is
 				 * not implemented.
 				 */
-				if (err == UBI_IO_BAD_VID_HDR) {
+				if (err == UBI_IO_BAD_HDR_READ ||
+				    err == UBI_IO_BAD_HDR) {
 					ubi_warn("corrupted VID header at PEB "
 						 "%d, LEB %d:%d", pnum, vol_id,
 						 lnum);
@@ -961,8 +962,8 @@
  */
 static int is_error_sane(int err)
 {
-	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR ||
-	    err == -ETIMEDOUT)
+	if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR ||
+	    err == UBI_IO_BAD_HDR_READ || err == -ETIMEDOUT)
 		return 0;
 	return 1;
 }
@@ -1165,6 +1166,44 @@
 }
 
 /**
+ * print_rsvd_warning - warn about not having enough reserved PEBs.
+ * @ubi: UBI device description object
+ *
+ * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI
+ * cannot reserve enough PEBs for bad block handling. This function makes a
+ * decision whether we have to print a warning or not. The algorithm is as
+ * follows:
+ *   o if this is a new UBI image, then just print the warning
+ *   o if this is an UBI image which has already been used for some time, print
+ *     a warning only if we can reserve less than 10% of the expected amount of
+ *     the reserved PEB.
+ *
+ * The idea is that when UBI is used, PEBs become bad, and the reserved pool
+ * of PEBs becomes smaller, which is normal and we do not want to scare users
+ * with a warning every time they attach the MTD device. This was an issue
+ * reported by real users.
+ */
+static void print_rsvd_warning(struct ubi_device *ubi,
+			       struct ubi_scan_info *si)
+{
+	/*
+	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
+	 * large number to distinguish between newly flashed and used images.
+	 */
+	if (si->max_sqnum > (1 << 18)) {
+		int min = ubi->beb_rsvd_level / 10;
+
+		if (!min)
+			min = 1;
+		if (ubi->beb_rsvd_pebs > min)
+			return;
+	}
+
+	ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d,"
+		 " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+}
+
+/**
  * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
@@ -1236,9 +1275,7 @@
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			ubi_warn("cannot reserve enough PEBs for bad PEB "
-				 "handling, reserved %d, need %d",
-				 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+			print_rsvd_warning(ubi, si);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 4b979e3..332f992 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -150,6 +150,8 @@
 retry:
 	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
 	if (err) {
+		const char *errstr = (err == -EBADMSG) ? " (ECC error)" : "";
+
 		if (err == -EUCLEAN) {
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
@@ -165,15 +167,15 @@
 		}
 
 		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d,"
+			dbg_io("error %d%s while reading %d bytes from PEB %d:%d,"
 			       " read only %zd bytes, retry",
-			       err, len, pnum, offset, read);
+			       err, errstr, len, pnum, offset, read);
 			yield();
 			goto retry;
 		}
 
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
+		ubi_err("error %d%s while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, errstr, len, pnum, offset, read);
 		ubi_dbg_dump_stack();
 
 		/*
@@ -515,7 +517,7 @@
 	 * In this case we probably anyway have garbage in this PEB.
 	 */
 	err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
-	if (err1 == UBI_IO_BAD_VID_HDR)
+	if (err1 == UBI_IO_BAD_HDR_READ || err1 == UBI_IO_BAD_HDR)
 		/*
 		 * The VID header is corrupted, so we can safely erase this
 		 * PEB and not afraid that it will be treated as a valid PEB in
@@ -709,7 +711,7 @@
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon (but may be not);
- * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
  * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
  * o a negative error code in case of failure.
  */
@@ -736,23 +738,21 @@
 		 * header is still OK, we just report this as there was a
 		 * bit-flip.
 		 */
-		read_err = err;
+		if (err == -EBADMSG)
+			read_err = UBI_IO_BAD_HDR_READ;
 	}
 
 	magic = be32_to_cpu(ec_hdr->magic);
 	if (magic != UBI_EC_HDR_MAGIC) {
+		if (read_err)
+			return read_err;
+
 		/*
 		 * The magic field is wrong. Let's check if we have read all
 		 * 0xFF. If yes, this physical eraseblock is assumed to be
 		 * empty.
-		 *
-		 * But if there was a read error, we do not test it for all
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and we anyway cannot treat it as empty.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+		if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly empty */
 			if (verbose)
 				ubi_warn("no EC header found at PEB %d, "
@@ -774,7 +774,7 @@
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad magic number at PEB %d: %08x instead of "
 				"%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-		return UBI_IO_BAD_EC_HDR;
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
@@ -788,7 +788,7 @@
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad EC header CRC at PEB %d, calculated "
 				"%#08x, read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_EC_HDR;
+		return read_err ?: UBI_IO_BAD_HDR;
 	}
 
 	/* And of course validate what has just been read from the media */
@@ -798,6 +798,10 @@
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was %-EBADMSG, but the header CRC is still OK, report about
+	 * a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
@@ -977,7 +981,7 @@
  * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
  *   and corrected by the flash driver; this is harmless but may indicate that
  *   this eraseblock may become bad soon;
- * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC
+ * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC
  *   error detected);
  * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
  *   header there);
@@ -1008,22 +1012,20 @@
 		 * CRC check-sum and we will identify this. If the VID header is
 		 * still OK, we just report this as there was a bit-flip.
 		 */
-		read_err = err;
+		if (err == -EBADMSG)
+			read_err = UBI_IO_BAD_HDR_READ;
 	}
 
 	magic = be32_to_cpu(vid_hdr->magic);
 	if (magic != UBI_VID_HDR_MAGIC) {
+		if (read_err)
+			return read_err;
+
 		/*
 		 * If we have read all 0xFF bytes, the VID header probably does
 		 * not exist and the physical eraseblock is assumed to be free.
-		 *
-		 * But if there was a read error, we do not test the data for
-		 * 0xFFs. Even if it does contain all 0xFFs, this error
-		 * indicates that something is still wrong with this physical
-		 * eraseblock and it cannot be regarded as free.
 		 */
-		if (read_err != -EBADMSG &&
-		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
+		if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
 			/* The physical eraseblock is supposedly free */
 			if (verbose)
 				ubi_warn("no VID header found at PEB %d, "
@@ -1045,7 +1047,7 @@
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad magic number at PEB %d: %08x instead of "
 				"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-		return UBI_IO_BAD_VID_HDR;
+		return UBI_IO_BAD_HDR;
 	}
 
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
@@ -1059,7 +1061,7 @@
 		} else if (UBI_IO_DEBUG)
 			dbg_msg("bad CRC at PEB %d, calculated %#08x, "
 				"read %#08x", pnum, crc, hdr_crc);
-		return UBI_IO_BAD_VID_HDR;
+		return read_err ?: UBI_IO_BAD_HDR;
 	}
 
 	/* Validate the VID header that we have just read */
@@ -1069,6 +1071,10 @@
 		return -EINVAL;
 	}
 
+	/*
+	 * If there was a read error (%-EBADMSG), but the header CRC is still
+	 * OK, report about a bit-flip to force scrubbing on this PEB.
+	 */
 	return read_err ? UBI_IO_BITFLIPS : 0;
 }
 
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index aed19f3..372a15a 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -44,6 +44,7 @@
 #include <linux/slab.h>
 #include <linux/crc32.h>
 #include <linux/math64.h>
+#include <linux/random.h>
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
@@ -72,16 +73,19 @@
 {
 	struct ubi_scan_leb *seb;
 
-	if (list == &si->free)
+	if (list == &si->free) {
 		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->erase)
+		si->free_peb_count += 1;
+	} else if (list == &si->erase) {
 		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
-	else if (list == &si->corr) {
+		si->erase_peb_count += 1;
+	} else if (list == &si->corr) {
 		dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
-		si->corr_count += 1;
-	} else if (list == &si->alien)
+		si->corr_peb_count += 1;
+	} else if (list == &si->alien) {
 		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
-	else
+		si->alien_peb_count += 1;
+	} else
 		BUG();
 
 	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
@@ -517,6 +521,7 @@
 	sv->leb_count += 1;
 	rb_link_node(&seb->u.rb, parent, p);
 	rb_insert_color(&seb->u.rb, &sv->root);
+	si->used_peb_count += 1;
 	return 0;
 }
 
@@ -745,19 +750,17 @@
 		bitflips = 1;
 	else if (err == UBI_IO_PEB_EMPTY)
 		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
-	else if (err == UBI_IO_BAD_EC_HDR) {
+	else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR) {
 		/*
 		 * We have to also look at the VID header, possibly it is not
 		 * corrupted. Set %bitflips flag in order to make this PEB be
 		 * moved and EC be re-created.
 		 */
-		ec_corr = 1;
+		ec_corr = err;
 		ec = UBI_SCAN_UNKNOWN_EC;
 		bitflips = 1;
 	}
 
-	si->is_empty = 0;
-
 	if (!ec_corr) {
 		int image_seq;
 
@@ -813,9 +816,12 @@
 		return err;
 	else if (err == UBI_IO_BITFLIPS)
 		bitflips = 1;
-	else if (err == UBI_IO_BAD_VID_HDR ||
+	else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR ||
 		 (err == UBI_IO_PEB_FREE && ec_corr)) {
 		/* VID header is corrupted */
+		if (err == UBI_IO_BAD_HDR_READ ||
+		    ec_corr == UBI_IO_BAD_HDR_READ)
+			si->read_err_count += 1;
 		err = add_to_list(si, pnum, ec, &si->corr);
 		if (err)
 			return err;
@@ -836,11 +842,11 @@
 		switch (vidh->compat) {
 		case UBI_COMPAT_DELETE:
 			ubi_msg("\"delete\" compatible internal volume %d:%d"
-				" found, remove it", vol_id, lnum);
+				" found, will remove it", vol_id, lnum);
 			err = add_to_list(si, pnum, ec, &si->corr);
 			if (err)
 				return err;
-			break;
+			return 0;
 
 		case UBI_COMPAT_RO:
 			ubi_msg("read-only compatible internal volume %d:%d"
@@ -855,7 +861,6 @@
 			err = add_to_list(si, pnum, ec, &si->alien);
 			if (err)
 				return err;
-			si->alien_peb_count += 1;
 			return 0;
 
 		case UBI_COMPAT_REJECT:
@@ -886,6 +891,85 @@
 }
 
 /**
+ * check_what_we_have - check what PEB were found by scanning.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This is a helper function which takes a look what PEBs were found by
+ * scanning, and decides whether the flash is empty and should be formatted and
+ * whether there are too many corrupted PEBs and we should not attach this
+ * MTD device. Returns zero if we should proceed with attaching the MTD device,
+ * and %-EINVAL if we should not.
+ */
+static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	struct ubi_scan_leb *seb;
+	int max_corr;
+
+	max_corr = ubi->peb_count - si->bad_peb_count - si->alien_peb_count;
+	max_corr = max_corr / 20 ?: 8;
+
+	/*
+	 * Few corrupted PEBs are not a problem and may be just a result of
+	 * unclean reboots. However, many of them may indicate some problems
+	 * with the flash HW or driver.
+	 */
+	if (si->corr_peb_count >= 8) {
+		ubi_warn("%d PEBs are corrupted", si->corr_peb_count);
+		printk(KERN_WARNING "corrupted PEBs are:");
+		list_for_each_entry(seb, &si->corr, u.list)
+			printk(KERN_CONT " %d", seb->pnum);
+		printk(KERN_CONT "\n");
+
+		/*
+		 * If too many PEBs are corrupted, we refuse attaching,
+		 * otherwise, only print a warning.
+		 */
+		if (si->corr_peb_count >= max_corr) {
+			ubi_err("too many corrupted PEBs, refusing this device");
+			return -EINVAL;
+		}
+	}
+
+	if (si->free_peb_count + si->used_peb_count +
+	    si->alien_peb_count == 0) {
+		/* No UBI-formatted eraseblocks were found */
+		if (si->corr_peb_count == si->read_err_count &&
+		    si->corr_peb_count < 8) {
+			/* No or just few corrupted PEBs, and all of them had a
+			 * read error. We assume that those are bad PEBs, which
+			 * were just not marked as bad so far.
+			 *
+			 * This piece of code basically tries to distinguish
+			 * between the following 2 situations:
+			 *
+			 * 1. Flash is empty, but there are few bad PEBs, which
+			 *    are not marked as bad so far, and which were read
+			 *    with error. We want to go ahead and format this
+			 *    flash. While formating, the faulty PEBs will
+			 *    probably be marked as bad.
+			 *
+			 * 2. Flash probably contains non-UBI data and we do
+			 * not want to format it and destroy possibly needed
+			 * data (e.g., consider the case when the bootloader
+			 * MTD partition was accidentally fed to UBI).
+			 */
+			si->is_empty = 1;
+			ubi_msg("empty MTD device detected");
+			get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq));
+		} else {
+			ubi_err("MTD device possibly contains non-UBI data, "
+				"refusing it");
+			return -EINVAL;
+		}
+	}
+
+	if (si->corr_peb_count > 0)
+		ubi_msg("corrupted PEBs will be formatted");
+	return 0;
+}
+
+/**
  * ubi_scan - scan an MTD device.
  * @ubi: UBI device description object
  *
@@ -909,7 +993,6 @@
 	INIT_LIST_HEAD(&si->erase);
 	INIT_LIST_HEAD(&si->alien);
 	si->volumes = RB_ROOT;
-	si->is_empty = 1;
 
 	err = -ENOMEM;
 	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
@@ -935,21 +1018,9 @@
 	if (si->ec_count)
 		si->mean_ec = div_u64(si->ec_sum, si->ec_count);
 
-	if (si->is_empty)
-		ubi_msg("empty MTD device detected");
-
-	/*
-	 * Few corrupted PEBs are not a problem and may be just a result of
-	 * unclean reboots. However, many of them may indicate some problems
-	 * with the flash HW or driver. Print a warning in this case.
-	 */
-	if (si->corr_count >= 8 || si->corr_count >= ubi->peb_count / 4) {
-		ubi_warn("%d PEBs are corrupted", si->corr_count);
-		printk(KERN_WARNING "corrupted PEBs are:");
-		list_for_each_entry(seb, &si->corr, u.list)
-			printk(KERN_CONT " %d", seb->pnum);
-		printk(KERN_CONT "\n");
-	}
+	err = check_what_we_have(ubi, si);
+	if (err)
+		goto out_vidh;
 
 	/*
 	 * In case of unknown erase counter we use the mean erase counter
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index ff179ad7..2576a8d 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -91,10 +91,16 @@
  * @erase: list of physical eraseblocks which have to be erased
  * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
  *         those belonging to "preserve"-compatible internal volumes)
+ * @used_peb_count: count of used PEBs
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @read_err_count: count of PEBs read with error (%UBI_IO_BAD_HDR_READ was
+ *                  returned)
+ * @free_peb_count: count of PEBs in the @free list
+ * @erase_peb_count: count of PEBs in the @erase list
+ * @alien_peb_count: count of PEBs in the @alien list
  * @bad_peb_count: count of bad physical eraseblocks
  * @vols_found: number of volumes found during scanning
  * @highest_vol_id: highest volume ID
- * @alien_peb_count: count of physical eraseblocks in the @alien list
  * @is_empty: flag indicating whether the MTD device is empty or not
  * @min_ec: lowest erase counter value
  * @max_ec: highest erase counter value
@@ -102,7 +108,6 @@
  * @mean_ec: mean erase counter value
  * @ec_sum: a temporary variable used when calculating @mean_ec
  * @ec_count: a temporary variable used when calculating @mean_ec
- * @corr_count: count of corrupted PEBs
  *
  * This data structure contains the result of scanning and may be used by other
  * UBI sub-systems to build final UBI data structures, further error-recovery
@@ -114,10 +119,15 @@
 	struct list_head free;
 	struct list_head erase;
 	struct list_head alien;
+	int used_peb_count;
+	int corr_peb_count;
+	int read_err_count;
+	int free_peb_count;
+	int erase_peb_count;
+	int alien_peb_count;
 	int bad_peb_count;
 	int vols_found;
 	int highest_vol_id;
-	int alien_peb_count;
 	int is_empty;
 	int min_ec;
 	int max_ec;
@@ -125,7 +135,6 @@
 	int mean_ec;
 	uint64_t ec_sum;
 	int ec_count;
-	int corr_count;
 };
 
 struct ubi_device;
@@ -135,7 +144,7 @@
  * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
  *
  * @sv: volume scanning information
- * @seb: scanning eraseblock infprmation
+ * @seb: scanning eraseblock information
  * @list: the list to move to
  */
 static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index a637f02..0359e0c 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -89,16 +89,16 @@
  *                   %0xFF bytes
  * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
  *                  valid erase counter header, and the rest are %0xFF bytes
- * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
- * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- *                     CRC)
+ * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
+ * UBI_IO_BAD_HDR_READ: the same as %UBI_IO_BAD_HDR, but also there was a read
+ * 			error reported by the flash driver
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
  */
 enum {
 	UBI_IO_PEB_EMPTY = 1,
 	UBI_IO_PEB_FREE,
-	UBI_IO_BAD_EC_HDR,
-	UBI_IO_BAD_VID_HDR,
+	UBI_IO_BAD_HDR,
+	UBI_IO_BAD_HDR_READ,
 	UBI_IO_BITFLIPS
 };
 
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 9c14975..284a5f4 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -598,8 +598,8 @@
 			goto rx_status_loop;
 
 		spin_lock_irqsave(&cp->lock, flags);
-		cpw16_f(IntrMask, cp_intr_mask);
 		__napi_complete(napi);
+		cpw16_f(IntrMask, cp_intr_mask);
 		spin_unlock_irqrestore(&cp->lock, flags);
 	}
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 4ba7293..97d8068 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -860,6 +860,7 @@
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
+	i = 0;
 	dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
 	dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
 	tp->chipset = 0;
@@ -2088,8 +2089,8 @@
 		 * again when we think we are done.
 		 */
 		spin_lock_irqsave(&tp->lock, flags);
-		RTL_W16_F(IntrMask, rtl8139_intr_mask);
 		__napi_complete(napi);
+		RTL_W16_F(IntrMask, rtl8139_intr_mask);
 		spin_unlock_irqrestore(&tp->lock, flags);
 	}
 	spin_unlock(&tp->rx_lock);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2decc59..ce2fcdd 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2754,6 +2754,7 @@
 config NETXEN_NIC
 	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
 	depends on PCI
+	select FW_LOADER
 	help
 	  This enables the support for NetXen's Gigabit Ethernet card.
 
@@ -2819,6 +2820,7 @@
 config QLCNIC
 	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
 	depends on PCI
+	select FW_LOADER
 	help
 	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
 	  devices.
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 188e356..1174322 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -247,6 +247,7 @@
 MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
 
 static void bnx2_init_napi(struct bnx2 *bp);
+static void bnx2_del_napi(struct bnx2 *bp);
 
 static inline u32 bnx2_tx_avail(struct bnx2 *bp, struct bnx2_tx_ring_info *txr)
 {
@@ -3072,7 +3073,6 @@
 	u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
 	struct l2_fhdr *rx_hdr;
 	int rx_pkt = 0, pg_ring_used = 0;
-	struct pci_dev *pdev = bp->pdev;
 
 	hw_cons = bnx2_get_hw_rx_cons(bnapi);
 	sw_cons = rxr->rx_cons;
@@ -3098,12 +3098,10 @@
 		skb = rx_buf->skb;
 		prefetchw(skb);
 
-		if (!get_dma_ops(&pdev->dev)->sync_single_for_cpu) {
-			next_rx_buf =
-				&rxr->rx_buf_ring[
-					RX_RING_IDX(NEXT_RX_BD(sw_cons))];
-			prefetch(next_rx_buf->desc);
-		}
+		next_rx_buf =
+			&rxr->rx_buf_ring[RX_RING_IDX(NEXT_RX_BD(sw_cons))];
+		prefetch(next_rx_buf->desc);
+
 		rx_buf->skb = NULL;
 
 		dma_addr = dma_unmap_addr(rx_buf, mapping);
@@ -6270,6 +6268,7 @@
 	bnx2_free_skbs(bp);
 	bnx2_free_irq(bp);
 	bnx2_free_mem(bp);
+	bnx2_del_napi(bp);
 	return rc;
 }
 
@@ -6537,6 +6536,7 @@
 	bnx2_free_irq(bp);
 	bnx2_free_skbs(bp);
 	bnx2_free_mem(bp);
+	bnx2_del_napi(bp);
 	bp->link_up = 0;
 	netif_carrier_off(bp->dev);
 	bnx2_set_power_state(bp, PCI_D3hot);
@@ -8227,7 +8227,16 @@
 	return str;
 }
 
-static void __devinit
+static void
+bnx2_del_napi(struct bnx2 *bp)
+{
+	int i;
+
+	for (i = 0; i < bp->irq_nvecs; i++)
+		netif_napi_del(&bp->bnx2_napi[i].napi);
+}
+
+static void
 bnx2_init_napi(struct bnx2 *bp)
 {
 	int i;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8bd2368..bb0872a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1062,6 +1062,10 @@
 
 	/* used to synchronize stats collecting */
 	int			stats_state;
+
+	/* used for synchronization of concurrent threads statistics handling */
+	spinlock_t		stats_lock;
+
 	/* used by dmae command loader */
 	struct dmae_command	stats_dmae;
 	int			executer_idx;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 57ff5b3..46167c0 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
 #include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.52.53-1"
-#define DRV_MODULE_RELDATE	"2010/18/04"
+#define DRV_MODULE_VERSION	"1.52.53-2"
+#define DRV_MODULE_RELDATE	"2010/21/07"
 #define BNX2X_BC_VER		0x040200
 
 #include <linux/firmware.h>
@@ -3789,6 +3789,8 @@
 		struct eth_query_ramrod_data ramrod_data = {0};
 		int i, rc;
 
+		spin_lock_bh(&bp->stats_lock);
+
 		ramrod_data.drv_counter = bp->stats_counter++;
 		ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
 		for_each_queue(bp, i)
@@ -3802,6 +3804,8 @@
 			bp->spq_left++;
 			bp->stats_pending = 1;
 		}
+
+		spin_unlock_bh(&bp->stats_lock);
 	}
 }
 
@@ -4367,6 +4371,14 @@
 	struct host_func_stats *fstats = bnx2x_sp(bp, func_stats);
 	struct bnx2x_eth_stats *estats = &bp->eth_stats;
 	int i;
+	u16 cur_stats_counter;
+
+	/* Make sure we use the value of the counter
+	 * used for sending the last stats ramrod.
+	 */
+	spin_lock_bh(&bp->stats_lock);
+	cur_stats_counter = bp->stats_counter - 1;
+	spin_unlock_bh(&bp->stats_lock);
 
 	memcpy(&(fstats->total_bytes_received_hi),
 	       &(bnx2x_sp(bp, func_stats_base)->total_bytes_received_hi),
@@ -4394,25 +4406,22 @@
 		u32 diff;
 
 		/* are storm stats valid? */
-		if ((u16)(le16_to_cpu(xclient->stats_counter) + 1) !=
-							bp->stats_counter) {
+		if (le16_to_cpu(xclient->stats_counter) != cur_stats_counter) {
 			DP(BNX2X_MSG_STATS, "[%d] stats not updated by xstorm"
 			   "  xstorm counter (0x%x) != stats_counter (0x%x)\n",
-			   i, xclient->stats_counter, bp->stats_counter);
+			   i, xclient->stats_counter, cur_stats_counter + 1);
 			return -1;
 		}
-		if ((u16)(le16_to_cpu(tclient->stats_counter) + 1) !=
-							bp->stats_counter) {
+		if (le16_to_cpu(tclient->stats_counter) != cur_stats_counter) {
 			DP(BNX2X_MSG_STATS, "[%d] stats not updated by tstorm"
 			   "  tstorm counter (0x%x) != stats_counter (0x%x)\n",
-			   i, tclient->stats_counter, bp->stats_counter);
+			   i, tclient->stats_counter, cur_stats_counter + 1);
 			return -2;
 		}
-		if ((u16)(le16_to_cpu(uclient->stats_counter) + 1) !=
-							bp->stats_counter) {
+		if (le16_to_cpu(uclient->stats_counter) != cur_stats_counter) {
 			DP(BNX2X_MSG_STATS, "[%d] stats not updated by ustorm"
 			   "  ustorm counter (0x%x) != stats_counter (0x%x)\n",
-			   i, uclient->stats_counter, bp->stats_counter);
+			   i, uclient->stats_counter, cur_stats_counter + 1);
 			return -4;
 		}
 
@@ -4849,16 +4858,18 @@
 
 static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
 {
-	enum bnx2x_stats_state state = bp->stats_state;
+	enum bnx2x_stats_state state;
 
 	if (unlikely(bp->panic))
 		return;
 
-	bnx2x_stats_stm[state][event].action(bp);
+	/* Protect a state change flow */
+	spin_lock_bh(&bp->stats_lock);
+	state = bp->stats_state;
 	bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+	spin_unlock_bh(&bp->stats_lock);
 
-	/* Make sure the state has been "changed" */
-	smp_wmb();
+	bnx2x_stats_stm[state][event].action(bp);
 
 	if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
 		DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
@@ -9908,6 +9919,7 @@
 
 	mutex_init(&bp->port.phy_mutex);
 	mutex_init(&bp->fw_mb_mutex);
+	spin_lock_init(&bp->stats_lock);
 #ifdef BCM_CNIC
 	mutex_init(&bp->cnic_mutex);
 #endif
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 40fdc41..8d7dfd2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -340,7 +340,8 @@
 
 	if ((client_info->assigned) &&
 	    (client_info->ip_src == arp->ip_dst) &&
-	    (client_info->ip_dst == arp->ip_src)) {
+	    (client_info->ip_dst == arp->ip_src) &&
+	    (compare_ether_addr_64bits(client_info->mac_dst, arp->mac_src))) {
 		/* update the clients MAC address */
 		memcpy(client_info->mac_dst, arp->mac_src, ETH_ALEN);
 		client_info->ntt = 1;
@@ -821,7 +822,7 @@
 
 	/*initialize packet type*/
 	pk_type->type = cpu_to_be16(ETH_P_ARP);
-	pk_type->dev = NULL;
+	pk_type->dev = bond->dev;
 	pk_type->func = rlb_arp_recv;
 
 	/* register to receive ARPs */
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5e12462..c3d98dd 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -168,7 +168,7 @@
 static int bond_mode	= BOND_MODE_ROUNDROBIN;
 static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
 static int lacp_fast;
-
+static int disable_netpoll = 1;
 
 const struct bond_parm_tbl bond_lacp_tbl[] = {
 {	"slow",		AD_LACP_SLOW},
@@ -1742,15 +1742,23 @@
 	bond_set_carrier(bond);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	if (slaves_support_netpoll(bond_dev)) {
-		bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
-		if (bond_dev->npinfo)
-			slave_dev->npinfo = bond_dev->npinfo;
-	} else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
+	/*
+	 * Netpoll and bonding is broken, make sure it is not initialized
+	 * until it is fixed.
+	 */
+	if (disable_netpoll) {
 		bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
-		pr_info("New slave device %s does not support netpoll\n",
-			slave_dev->name);
-		pr_info("Disabling netpoll support for %s\n", bond_dev->name);
+	} else {
+		if (slaves_support_netpoll(bond_dev)) {
+			bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+			if (bond_dev->npinfo)
+				slave_dev->npinfo = bond_dev->npinfo;
+		} else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
+			bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
+			pr_info("New slave device %s does not support netpoll\n",
+				slave_dev->name);
+			pr_info("Disabling netpoll support for %s\n", bond_dev->name);
+		}
 	}
 #endif
 	read_unlock(&bond->lock);
@@ -1950,8 +1958,11 @@
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	read_lock_bh(&bond->lock);
-	if (slaves_support_netpoll(bond_dev))
-		bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
+
+	 /* Make sure netpoll over stays disabled until fixed. */
+	if (!disable_netpoll)
+		if (slaves_support_netpoll(bond_dev))
+				bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
 	read_unlock_bh(&bond->lock);
 	if (slave_dev->netdev_ops->ndo_netpoll_cleanup)
 		slave_dev->netdev_ops->ndo_netpoll_cleanup(slave_dev);
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index fe92566..8047126 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -3919,8 +3919,9 @@
 		HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS;
 	context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID;
 
-	context->xstorm_st_context.statistics_data = (cli |
-				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+	if (cli < MAX_X_STAT_COUNTER_ID)
+		context->xstorm_st_context.statistics_data = cli |
+				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE;
 
 	context->xstorm_ag_context.cdu_reserved =
 		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
@@ -3928,10 +3929,12 @@
 					ETH_CONNECTION_TYPE);
 
 	/* reset xstorm per client statistics */
-	val = BAR_XSTRORM_INTMEM +
-	      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_X_STAT_COUNTER_ID) {
+		val = BAR_XSTRORM_INTMEM +
+		      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	cp->tx_cons_ptr =
 		&cp->bnx2x_def_status_blk->c_def_status_block.index_values[
@@ -3978,9 +3981,11 @@
 						BNX2X_ISCSI_RX_SB_INDEX_NUM;
 	context->ustorm_st_context.common.clientId = cli;
 	context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID;
-	context->ustorm_st_context.common.flags =
-		USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
-	context->ustorm_st_context.common.statistics_counter_id = cli;
+	if (cli < MAX_U_STAT_COUNTER_ID) {
+		context->ustorm_st_context.common.flags =
+			USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
+		context->ustorm_st_context.common.statistics_counter_id = cli;
+	}
 	context->ustorm_st_context.common.mc_alignment_log_size = 0;
 	context->ustorm_st_context.common.bd_buff_size =
 						cp->l2_single_buf_size;
@@ -4011,10 +4016,13 @@
 
 	/* client tstorm info */
 	tstorm_client.mtu = cp->l2_single_buf_size - 14;
-	tstorm_client.config_flags =
-			(TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE |
-			TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE);
-	tstorm_client.statistics_counter_id = cli;
+	tstorm_client.config_flags = TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE;
+
+	if (cli < MAX_T_STAT_COUNTER_ID) {
+		tstorm_client.config_flags |=
+				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+		tstorm_client.statistics_counter_id = cli;
+	}
 
 	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
 		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli),
@@ -4024,16 +4032,21 @@
 		   ((u32 *)&tstorm_client)[1]);
 
 	/* reset tstorm per client statistics */
-	val = BAR_TSTRORM_INTMEM +
-	      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_T_STAT_COUNTER_ID) {
+
+		val = BAR_TSTRORM_INTMEM +
+		      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	/* reset ustorm per client statistics */
-	val = BAR_USTRORM_INTMEM +
-	      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
-	for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
-		CNIC_WR(dev, val + i * 4, 0);
+	if (cli < MAX_U_STAT_COUNTER_ID) {
+		val = BAR_USTRORM_INTMEM +
+		      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+		for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
+			CNIC_WR(dev, val + i * 4, 0);
+	}
 
 	cp->rx_cons_ptr =
 		&cp->bnx2x_def_status_blk->u_def_status_block.index_values[
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3c58db5..23786ee 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1181,7 +1181,8 @@
 		if (netif_msg_drv(priv))
 			printk(KERN_ERR "%s: Could not attach to PHY\n",
 			       dev->name);
-		return PTR_ERR(priv->phy);
+		rc = PTR_ERR(priv->phy);
+		goto fail;
 	}
 
 	if ((rc = register_netdev(dev))) {
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 1d973db..d7de376 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1022,7 +1022,7 @@
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init dec_lance_probe(struct device *bdev, const int type)
+static int __devinit dec_lance_probe(struct device *bdev, const int type)
 {
 	static unsigned version_printed;
 	static const char fmt[] = "declance%d";
@@ -1326,7 +1326,7 @@
 }
 
 #ifdef CONFIG_TC
-static int __init dec_lance_tc_probe(struct device *dev);
+static int __devinit dec_lance_tc_probe(struct device *dev);
 static int __exit dec_lance_tc_remove(struct device *dev);
 
 static const struct tc_device_id dec_lance_tc_table[] = {
@@ -1345,7 +1345,7 @@
 	},
 };
 
-static int __init dec_lance_tc_probe(struct device *dev)
+static int __devinit dec_lance_tc_probe(struct device *dev)
 {
         int status = dec_lance_probe(dev, PMAD_LANCE);
         if (!status)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ebdea08..68a8089 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1047,15 +1047,14 @@
 		goto err_register;
 
 	/* print bus type/speed/width info */
-	e_info("(PCI%s:%s:%s) ",
-		((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
-		((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
-		 (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
-		 (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
-		 (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
-		((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
-
-	e_info("%pM\n", netdev->dev_addr);
+	e_info("(PCI%s:%dMHz:%d-bit) %pM\n",
+	       ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+	       ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
+		(hw->bus_speed == e1000_bus_speed_120) ? 120 :
+		(hw->bus_speed == e1000_bus_speed_100) ? 100 :
+		(hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
+	       ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
+	       netdev->dev_addr);
 
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 24507f3..57a7e41 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2554,7 +2554,7 @@
 			mdef = er32(MDEF(i));
 
 			/* Ignore filters with anything other than IPMI ports */
-			if (mdef & !(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+			if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
 				continue;
 
 			/* Enable this decision filter in MANC2H */
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 0630980a..0060e42 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0103"
+#define DRV_VERSION	"EHEA_0105"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f547894..8b92acb 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -867,6 +867,7 @@
 		ehea_reset_cq_ep(pr->send_cq);
 		ehea_reset_cq_n1(pr->recv_cq);
 		ehea_reset_cq_n1(pr->send_cq);
+		rmb();
 		cqe = ehea_poll_rq1(pr->qp, &wqe_index);
 		cqe_skb = ehea_poll_cq(pr->send_cq);
 
@@ -2859,6 +2860,7 @@
 		container_of(work, struct ehea_port, reset_task);
 	struct net_device *dev = port->netdev;
 
+	mutex_lock(&dlpar_mem_lock);
 	port->resets++;
 	mutex_lock(&port->port_lock);
 	netif_stop_queue(dev);
@@ -2881,6 +2883,7 @@
 	netif_wake_queue(dev);
 out:
 	mutex_unlock(&port->port_lock);
+	mutex_unlock(&dlpar_mem_lock);
 }
 
 static void ehea_rereg_mrs(struct work_struct *work)
@@ -3542,10 +3545,7 @@
 	int ret = NOTIFY_BAD;
 	struct memory_notify *arg = data;
 
-	if (!mutex_trylock(&dlpar_mem_lock)) {
-		ehea_info("ehea_mem_notifier must not be called parallelized");
-		goto out;
-	}
+	mutex_lock(&dlpar_mem_lock);
 
 	switch (action) {
 	case MEM_CANCEL_OFFLINE:
@@ -3574,7 +3574,6 @@
 
 out_unlock:
 	mutex_unlock(&dlpar_mem_lock);
-out:
 	return ret;
 }
 
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 85f2a2e7..45e86d1 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -74,7 +74,14 @@
 	void *devid;
 };
 
+#define ENIC_SET_APPLIED		(1 << 0)
+#define ENIC_SET_REQUEST		(1 << 1)
+#define ENIC_SET_NAME			(1 << 2)
+#define ENIC_SET_INSTANCE		(1 << 3)
+#define ENIC_SET_HOST			(1 << 4)
+
 struct enic_port_profile {
+	u32 set;
 	u8 request;
 	char name[PORT_PROFILE_MAX];
 	u8 instance_uuid[PORT_UUID_MAX];
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 6586b5c..bc7d6b9 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1029,8 +1029,7 @@
 	return err;
 }
 
-static int enic_set_port_profile(struct enic *enic, u8 request, u8 *mac,
-	char *name, u8 *instance_uuid, u8 *host_uuid)
+static int enic_set_port_profile(struct enic *enic, u8 *mac)
 {
 	struct vic_provinfo *vp;
 	u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
@@ -1040,97 +1039,112 @@
 		"%02X%02X-%02X%02X%02X%02X%0X%02X";
 	int err;
 
-	if (!name)
-		return -EINVAL;
-
-	if (!is_valid_ether_addr(mac))
-		return -EADDRNOTAVAIL;
-
-	vp = vic_provinfo_alloc(GFP_KERNEL, oui, VIC_PROVINFO_LINUX_TYPE);
-	if (!vp)
-		return -ENOMEM;
-
-	vic_provinfo_add_tlv(vp,
-		VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR,
-		strlen(name) + 1, name);
-
-	vic_provinfo_add_tlv(vp,
-		VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR,
-		ETH_ALEN, mac);
-
-	if (instance_uuid) {
-		uuid = instance_uuid;
-		sprintf(uuid_str, uuid_fmt,
-			uuid[0],  uuid[1],  uuid[2],  uuid[3],
-			uuid[4],  uuid[5],  uuid[6],  uuid[7],
-			uuid[8],  uuid[9],  uuid[10], uuid[11],
-			uuid[12], uuid[13], uuid[14], uuid[15]);
-		vic_provinfo_add_tlv(vp,
-			VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
-			sizeof(uuid_str), uuid_str);
-	}
-
-	if (host_uuid) {
-		uuid = host_uuid;
-		sprintf(uuid_str, uuid_fmt,
-			uuid[0],  uuid[1],  uuid[2],  uuid[3],
-			uuid[4],  uuid[5],  uuid[6],  uuid[7],
-			uuid[8],  uuid[9],  uuid[10], uuid[11],
-			uuid[12], uuid[13], uuid[14], uuid[15]);
-		vic_provinfo_add_tlv(vp,
-			VIC_LINUX_PROV_TLV_HOST_UUID_STR,
-			sizeof(uuid_str), uuid_str);
-	}
-
 	err = enic_vnic_dev_deinit(enic);
 	if (err)
-		goto err_out;
+		return err;
 
-	memset(&enic->pp, 0, sizeof(enic->pp));
+	switch (enic->pp.request) {
 
-	err = enic_dev_init_prov(enic, vp);
-	if (err)
-		goto err_out;
+	case PORT_REQUEST_ASSOCIATE:
 
-	enic->pp.request = request;
-	memcpy(enic->pp.name, name, PORT_PROFILE_MAX);
-	if (instance_uuid)
-		memcpy(enic->pp.instance_uuid,
-			instance_uuid, PORT_UUID_MAX);
-	if (host_uuid)
-		memcpy(enic->pp.host_uuid,
-			host_uuid, PORT_UUID_MAX);
+		if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
+			return -EINVAL;
 
-err_out:
-	vic_provinfo_free(vp);
+		if (!is_valid_ether_addr(mac))
+			return -EADDRNOTAVAIL;
 
-	return err;
-}
+		vp = vic_provinfo_alloc(GFP_KERNEL, oui,
+			VIC_PROVINFO_LINUX_TYPE);
+		if (!vp)
+			return -ENOMEM;
 
-static int enic_unset_port_profile(struct enic *enic)
-{
-	memset(&enic->pp, 0, sizeof(enic->pp));
-	return enic_vnic_dev_deinit(enic);
+		vic_provinfo_add_tlv(vp,
+			VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR,
+			strlen(enic->pp.name) + 1, enic->pp.name);
+
+		vic_provinfo_add_tlv(vp,
+			VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR,
+			ETH_ALEN, mac);
+
+		if (enic->pp.set & ENIC_SET_INSTANCE) {
+			uuid = enic->pp.instance_uuid;
+			sprintf(uuid_str, uuid_fmt,
+				uuid[0],  uuid[1],  uuid[2],  uuid[3],
+				uuid[4],  uuid[5],  uuid[6],  uuid[7],
+				uuid[8],  uuid[9],  uuid[10], uuid[11],
+				uuid[12], uuid[13], uuid[14], uuid[15]);
+			vic_provinfo_add_tlv(vp,
+				VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
+				sizeof(uuid_str), uuid_str);
+		}
+
+		if (enic->pp.set & ENIC_SET_HOST) {
+			uuid = enic->pp.host_uuid;
+			sprintf(uuid_str, uuid_fmt,
+				uuid[0],  uuid[1],  uuid[2],  uuid[3],
+				uuid[4],  uuid[5],  uuid[6],  uuid[7],
+				uuid[8],  uuid[9],  uuid[10], uuid[11],
+				uuid[12], uuid[13], uuid[14], uuid[15]);
+			vic_provinfo_add_tlv(vp,
+				VIC_LINUX_PROV_TLV_HOST_UUID_STR,
+				sizeof(uuid_str), uuid_str);
+		}
+
+		err = enic_dev_init_prov(enic, vp);
+		vic_provinfo_free(vp);
+		if (err)
+			return err;
+		break;
+
+	case PORT_REQUEST_DISASSOCIATE:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	enic->pp.set |= ENIC_SET_APPLIED;
+	return 0;
 }
 
 static int enic_set_vf_port(struct net_device *netdev, int vf,
 	struct nlattr *port[])
 {
 	struct enic *enic = netdev_priv(netdev);
-	char *name = NULL;
-	u8 *instance_uuid = NULL;
-	u8 *host_uuid = NULL;
-	u8 request = PORT_REQUEST_DISASSOCIATE;
+
+	memset(&enic->pp, 0, sizeof(enic->pp));
+
+	if (port[IFLA_PORT_REQUEST]) {
+		enic->pp.set |= ENIC_SET_REQUEST;
+		enic->pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+	}
+
+	if (port[IFLA_PORT_PROFILE]) {
+		enic->pp.set |= ENIC_SET_NAME;
+		memcpy(enic->pp.name, nla_data(port[IFLA_PORT_PROFILE]),
+			PORT_PROFILE_MAX);
+	}
+
+	if (port[IFLA_PORT_INSTANCE_UUID]) {
+		enic->pp.set |= ENIC_SET_INSTANCE;
+		memcpy(enic->pp.instance_uuid,
+			nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
+	}
+
+	if (port[IFLA_PORT_HOST_UUID]) {
+		enic->pp.set |= ENIC_SET_HOST;
+		memcpy(enic->pp.host_uuid,
+			nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
+	}
 
 	/* don't support VFs, yet */
 	if (vf != PORT_SELF_VF)
 		return -EOPNOTSUPP;
 
-	if (port[IFLA_PORT_REQUEST])
-		request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+	if (!(enic->pp.set & ENIC_SET_REQUEST))
+		return -EOPNOTSUPP;
 
-	switch (request) {
-	case PORT_REQUEST_ASSOCIATE:
+	if (enic->pp.request == PORT_REQUEST_ASSOCIATE) {
 
 		/* If the interface mac addr hasn't been assigned,
 		 * assign a random mac addr before setting port-
@@ -1139,30 +1153,9 @@
 
 		if (is_zero_ether_addr(netdev->dev_addr))
 			random_ether_addr(netdev->dev_addr);
-
-		if (port[IFLA_PORT_PROFILE])
-			name = nla_data(port[IFLA_PORT_PROFILE]);
-
-		if (port[IFLA_PORT_INSTANCE_UUID])
-			instance_uuid =
-				nla_data(port[IFLA_PORT_INSTANCE_UUID]);
-
-		if (port[IFLA_PORT_HOST_UUID])
-			host_uuid = nla_data(port[IFLA_PORT_HOST_UUID]);
-
-		return enic_set_port_profile(enic, request,
-			netdev->dev_addr, name,
-			instance_uuid, host_uuid);
-
-	case PORT_REQUEST_DISASSOCIATE:
-
-		return enic_unset_port_profile(enic);
-
-	default:
-		break;
 	}
 
-	return -EOPNOTSUPP;
+	return enic_set_port_profile(enic, netdev->dev_addr);
 }
 
 static int enic_get_vf_port(struct net_device *netdev, int vf,
@@ -1172,14 +1165,12 @@
 	int err, error, done;
 	u16 response = PORT_PROFILE_RESPONSE_SUCCESS;
 
-	/* don't support VFs, yet */
-	if (vf != PORT_SELF_VF)
-		return -EOPNOTSUPP;
+	if (!(enic->pp.set & ENIC_SET_APPLIED))
+		return -ENODATA;
 
 	err = enic_dev_init_done(enic, &done, &error);
-
 	if (err)
-		return err;
+		error = err;
 
 	switch (error) {
 	case ERR_SUCCESS:
@@ -1202,12 +1193,15 @@
 
 	NLA_PUT_U16(skb, IFLA_PORT_REQUEST, enic->pp.request);
 	NLA_PUT_U16(skb, IFLA_PORT_RESPONSE, response);
-	NLA_PUT(skb, IFLA_PORT_PROFILE, PORT_PROFILE_MAX,
-		enic->pp.name);
-	NLA_PUT(skb, IFLA_PORT_INSTANCE_UUID, PORT_UUID_MAX,
-		enic->pp.instance_uuid);
-	NLA_PUT(skb, IFLA_PORT_HOST_UUID, PORT_UUID_MAX,
-		enic->pp.host_uuid);
+	if (enic->pp.set & ENIC_SET_NAME)
+		NLA_PUT(skb, IFLA_PORT_PROFILE, PORT_PROFILE_MAX,
+			enic->pp.name);
+	if (enic->pp.set & ENIC_SET_INSTANCE)
+		NLA_PUT(skb, IFLA_PORT_INSTANCE_UUID, PORT_UUID_MAX,
+			enic->pp.instance_uuid);
+	if (enic->pp.set & ENIC_SET_HOST)
+		NLA_PUT(skb, IFLA_PORT_HOST_UUID, PORT_UUID_MAX,
+			enic->pp.host_uuid);
 
 	return 0;
 
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index 2b3e16d..e0d3328 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -709,7 +709,7 @@
 {
 	u64 a0, a1 = len;
 	int wait = 1000;
-	u64 prov_pa;
+	dma_addr_t prov_pa;
 	void *prov_buf;
 	int ret;
 
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 6838dfc..4c27465 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -87,6 +87,7 @@
 #include <linux/bitops.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
+#include <asm/byteorder.h>
 
 /* These identify the driver base version and may not be removed. */
 static char version[] __devinitdata =
@@ -230,7 +231,7 @@
  * The EPIC100 Rx and Tx buffer descriptors.  Note that these
  * really ARE host-endian; it's not a misannotation.  We tell
  * the card to byteswap them internally on big-endian hosts -
- * look for #ifdef CONFIG_BIG_ENDIAN in epic_open().
+ * look for #ifdef __BIG_ENDIAN in epic_open().
  */
 
 struct epic_tx_desc {
@@ -690,7 +691,7 @@
 		outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
 
 	/* Tell the chip to byteswap descriptors on big-endian hosts */
-#ifdef CONFIG_BIG_ENDIAN
+#ifdef __BIG_ENDIAN
 	outl(0x4432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
 	inl(ioaddr + GENCTL);
 	outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
@@ -806,7 +807,7 @@
 	for (i = 16; i > 0; i--)
 		outl(0x0008, ioaddr + TEST1);
 
-#ifdef CONFIG_BIG_ENDIAN
+#ifdef __BIG_ENDIAN
 	outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
 #else
 	outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index ddf7a86c..edfff92 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1373,10 +1373,9 @@
 
 	if (ndev) {
 		fep = netdev_priv(ndev);
-		if (netif_running(ndev)) {
-			netif_device_detach(ndev);
-			fec_stop(ndev);
-		}
+		if (netif_running(ndev))
+			fec_enet_close(ndev);
+		clk_disable(fep->clk);
 	}
 	return 0;
 }
@@ -1385,12 +1384,13 @@
 fec_resume(struct platform_device *dev)
 {
 	struct net_device *ndev = platform_get_drvdata(dev);
+	struct fec_enet_private *fep;
 
 	if (ndev) {
-		if (netif_running(ndev)) {
-			fec_enet_init(ndev, 0);
-			netif_device_attach(ndev);
-		}
+		fep = netdev_priv(ndev);
+		clk_enable(fep->clk);
+		if (netif_running(ndev))
+			fec_enet_open(ndev);
 	}
 	return 0;
 }
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1830f31..28b53d1 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -381,10 +381,14 @@
 	/* Insert receive time stamps into padding alignment bytes */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER) {
 		rctrl &= ~RCTRL_PAL_MASK;
-		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE | RCTRL_PADDING(8);
+		rctrl |= RCTRL_PADDING(8);
 		priv->padding = 8;
 	}
 
+	/* Enable HW time stamping if requested from user space */
+	if (priv->hwts_rx_en)
+		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
+
 	/* keep vlan related bits if it's enabled */
 	if (priv->vlgrp) {
 		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
@@ -806,12 +810,20 @@
 
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
-		priv->hwts_rx_en = 0;
+		if (priv->hwts_rx_en) {
+			stop_gfar(netdev);
+			priv->hwts_rx_en = 0;
+			startup_gfar(netdev);
+		}
 		break;
 	default:
 		if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER))
 			return -ERANGE;
-		priv->hwts_rx_en = 1;
+		if (!priv->hwts_rx_en) {
+			stop_gfar(netdev);
+			priv->hwts_rx_en = 1;
+			startup_gfar(netdev);
+		}
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;
 	}
@@ -2643,6 +2655,10 @@
 		dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
 				priv->rx_buffer_size, DMA_FROM_DEVICE);
 
+		if (unlikely(!(bdp->status & RXBD_ERR) &&
+				bdp->length > priv->rx_buffer_size))
+			bdp->status = RXBD_LARGE;
+
 		/* We drop the frame if we failed to allocate a new buffer */
 		if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
 				 bdp->status & RXBD_ERR)) {
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 7acb3ed..2602852 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -677,7 +677,7 @@
 	if (!adapter->pool_config)
 		netif_stop_queue(netdev);
 
-	free_irq(netdev->irq, netdev);
+	h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
 
 	do {
 		lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
@@ -689,6 +689,8 @@
 				     lpar_rc);
 	}
 
+	free_irq(netdev->irq, netdev);
+
 	adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
 
 	ibmveth_cleanup(adapter);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3881918..cea37e0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1722,6 +1722,15 @@
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 
+	/* Catch broken hardware that put the wrong VF device ID in
+	 * the PCIe SR-IOV capability.
+	 */
+	if (pdev->is_virtfn) {
+		WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+		     pci_name(pdev), pdev->vendor, pdev->device);
+		return -EINVAL;
+	}
+
 	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 1159d91..9595b1b 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1188,6 +1188,7 @@
 		IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
 	} else {
 		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_RAR_INDEX;
 	}
 
 	return 0;
@@ -1219,6 +1220,7 @@
 		IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
 	} else {
 		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_RAR_INDEX;
 	}
 
 	/* clear VMDq pool/queue selection for this RAR */
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index c50a754..3a93a81 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -2077,25 +2077,6 @@
 	return 0;
 }
 
-/*
- * this function must be called before setting the new value of
- * rx_itr_setting
- */
-static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter,
-                               struct ethtool_coalesce *ec)
-{
-	/* check the old value and enable RSC if necessary */
-	if ((adapter->rx_itr_setting == 0) &&
-	    (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
-		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
-		adapter->netdev->features |= NETIF_F_LRO;
-		DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
-		        ec->rx_coalesce_usecs);
-		return true;
-	}
-	return false;
-}
-
 static int ixgbe_set_coalesce(struct net_device *netdev,
                               struct ethtool_coalesce *ec)
 {
@@ -2124,9 +2105,6 @@
 		    (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
 			return -EINVAL;
 
-		/* check the old value and enable RSC if necessary */
-		need_reset = ixgbe_reenable_rsc(adapter, ec);
-
 		/* store the value in ints/second */
 		adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
 
@@ -2135,9 +2113,6 @@
 		/* clear the lower bit as its used for dynamic state */
 		adapter->rx_itr_setting &= ~1;
 	} else if (ec->rx_coalesce_usecs == 1) {
-		/* check the old value and enable RSC if necessary */
-		need_reset = ixgbe_reenable_rsc(adapter, ec);
-
 		/* 1 means dynamic mode */
 		adapter->rx_eitr_param = 20000;
 		adapter->rx_itr_setting = 1;
@@ -2157,10 +2132,11 @@
 		 */
 		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
-			netdev->features &= ~NETIF_F_LRO;
-			DPRINTK(PROBE, INFO,
-			        "rx-usecs set to 0, disabling RSC\n");
-
+			if (netdev->features & NETIF_F_LRO) {
+				netdev->features &= ~NETIF_F_LRO;
+				DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+					"disabling LRO/RSC\n");
+			}
 			need_reset = true;
 		}
 	}
@@ -2255,6 +2231,9 @@
 			}
 		} else if (!adapter->rx_itr_setting) {
 			netdev->features &= ~ETH_FLAG_LRO;
+			if (data & ETH_FLAG_LRO)
+				DPRINTK(PROBE, INFO, "rx-usecs set to 0, "
+					"LRO/RSC cannot be enabled.\n");
 		}
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d571d10..74d9b6d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -642,7 +642,7 @@
 	u32 txoff = IXGBE_TFCS_TXOFF;
 
 #ifdef CONFIG_IXGBE_DCB
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+	if (adapter->dcb_cfg.pfc_mode_enable) {
 		int tc;
 		int reg_idx = tx_ring->reg_idx;
 		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
@@ -3684,10 +3684,6 @@
 	/* signal that we are down to the interrupt handler */
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
-	/* power down the optics */
-	if (hw->phy.multispeed_fiber)
-		hw->mac.ops.disable_tx_laser(hw);
-
 	/* disable receive for all VFs and wait one second */
 	if (adapter->num_vfs) {
 		/* ping all the active vfs to let them know we are going down */
@@ -3742,6 +3738,10 @@
 		                (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
 		                 ~IXGBE_DMATXCTL_TE));
 
+	/* power down the optics */
+	if (hw->phy.multispeed_fiber)
+		hw->mac.ops.disable_tx_laser(hw);
+
 	/* clear n-tuple filters that are cached */
 	ethtool_ntuple_flush(netdev);
 
@@ -4001,7 +4001,7 @@
 
 done:
 	/* Notify the stack of the (possibly) reduced Tx Queue count. */
-	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
+	netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
 }
 
 static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
@@ -5195,7 +5195,6 @@
 		ixgbe_free_all_tx_resources(adapter);
 		ixgbe_free_all_rx_resources(adapter);
 	}
-	ixgbe_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -5230,6 +5229,8 @@
 
 	*enable_wake = !!wufc;
 
+	ixgbe_clear_interrupt_scheme(adapter);
+
 	ixgbe_release_hw_control(adapter);
 
 	pci_disable_device(pdev);
@@ -5282,6 +5283,10 @@
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
 	u64 non_eop_descs = 0, restart_queue = 0;
 
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
 	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		u64 rsc_count = 0;
 		u64 rsc_flush = 0;
@@ -6019,7 +6024,6 @@
 static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 	              int queue, u32 tx_flags)
 {
-	/* Right now, we support IPv4 only */
 	struct ixgbe_atr_input atr_input;
 	struct tcphdr *th;
 	struct iphdr *iph = ip_hdr(skb);
@@ -6028,6 +6032,9 @@
 	u32 src_ipv4_addr, dst_ipv4_addr;
 	u8 l4type = 0;
 
+	/* Right now, we support IPv4 only */
+	if (skb->protocol != htons(ETH_P_IP))
+		return;
 	/* check if we're UDP or TCP */
 	if (iph->protocol == IPPROTO_TCP) {
 		th = tcp_hdr(skb);
@@ -6485,6 +6492,15 @@
 #endif
 	u32 part_num, eec;
 
+	/* Catch broken hardware that put the wrong VF device ID in
+	 * the PCIe SR-IOV capability.
+	 */
+	if (pdev->is_virtfn) {
+		WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+		     pci_name(pdev), pdev->vendor, pdev->device);
+		return -EINVAL;
+	}
+
 	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 09e1911..48325a5 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -575,6 +575,8 @@
 		 * 4    SFP_DA_CORE1 - 82599-specific
 		 * 5    SFP_SR/LR_CORE0 - 82599-specific
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
+		 * 7    SFP_act_lmt_DA_CORE0 - 82599-specific
+		 * 8    SFP_act_lmt_DA_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
 			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 2eb6e15..cdd1998 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2609,6 +2609,7 @@
 #define IXGBE_ERR_EEPROM_VERSION                -24
 #define IXGBE_ERR_NO_SPACE                      -25
 #define IXGBE_ERR_OVERTEMP                      -26
+#define IXGBE_ERR_RAR_INDEX                     -27
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
 #endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 26bf1b7..c7a9bef 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -135,6 +135,7 @@
 	struct napi_struct napi;
 	struct timer_list media_check_timer;
 	struct mii_if_info mii_if;
+	struct work_struct restart_task;
 	struct net_device *dev;
 	int phy_addr;
 };
@@ -375,7 +376,7 @@
 		if (devcs & ETH_RX_LE)
 			dev->stats.rx_length_errors++;
 		if (devcs & ETH_RX_OVR)
-			dev->stats.rx_over_errors++;
+			dev->stats.rx_fifo_errors++;
 		if (devcs & ETH_RX_CV)
 			dev->stats.rx_frame_errors++;
 		if (devcs & ETH_RX_CES)
@@ -764,10 +765,9 @@
 
 	/* Initialize the receive descriptors */
 	for (i = 0; i < KORINA_NUM_RDS; i++) {
-		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
+		skb = netdev_alloc_skb_ip_align(dev, KORINA_RBSIZE);
 		if (!skb)
 			return -ENOMEM;
-		skb_reserve(skb, 2);
 		lp->rx_skb[i] = skb;
 		lp->rd_ring[i].control = DMA_DESC_IOD |
 				DMA_COUNT(KORINA_RBSIZE);
@@ -890,12 +890,12 @@
 
 /*
  * Restart the RC32434 ethernet controller.
- * FIXME: check the return status where we call it
  */
-static int korina_restart(struct net_device *dev)
+static void korina_restart_task(struct work_struct *work)
 {
-	struct korina_private *lp = netdev_priv(dev);
-	int ret;
+	struct korina_private *lp = container_of(work,
+			struct korina_private, restart_task);
+	struct net_device *dev = lp->dev;
 
 	/*
 	 * Disable interrupts
@@ -916,10 +916,9 @@
 
 	napi_disable(&lp->napi);
 
-	ret = korina_init(dev);
-	if (ret < 0) {
+	if (korina_init(dev) < 0) {
 		printk(KERN_ERR "%s: cannot restart device\n", dev->name);
-		return ret;
+		return;
 	}
 	korina_multicast_list(dev);
 
@@ -927,8 +926,6 @@
 	enable_irq(lp->ovr_irq);
 	enable_irq(lp->tx_irq);
 	enable_irq(lp->rx_irq);
-
-	return ret;
 }
 
 static void korina_clear_and_restart(struct net_device *dev, u32 value)
@@ -937,7 +934,7 @@
 
 	netif_stop_queue(dev);
 	writel(value, &lp->eth_regs->ethintfc);
-	korina_restart(dev);
+	schedule_work(&lp->restart_task);
 }
 
 /* Ethernet Tx Underflow interrupt */
@@ -962,11 +959,8 @@
 static void korina_tx_timeout(struct net_device *dev)
 {
 	struct korina_private *lp = netdev_priv(dev);
-	unsigned long flags;
 
-	spin_lock_irqsave(&lp->lock, flags);
-	korina_restart(dev);
-	spin_unlock_irqrestore(&lp->lock, flags);
+	schedule_work(&lp->restart_task);
 }
 
 /* Ethernet Rx Overflow interrupt */
@@ -1086,6 +1080,8 @@
 
 	napi_disable(&lp->napi);
 
+	cancel_work_sync(&lp->restart_task);
+
 	free_irq(lp->rx_irq, dev);
 	free_irq(lp->tx_irq, dev);
 	free_irq(lp->ovr_irq, dev);
@@ -1198,6 +1194,8 @@
 	}
 	setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
 
+	INIT_WORK(&lp->restart_task, korina_restart_task);
+
 	printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n",
 			dev->name);
 out:
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index ce5d6e9..c27f429 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1343,7 +1343,7 @@
 	DEB(DEB_MULTI,
 	    printk(KERN_DEBUG
 		   "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		   dev->name, dev->mc_count,
+		   dev->name, netdev_mc_count(dev),
 		   dev->flags & IFF_PROMISC ? "ON" : "OFF",
 		   dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
 
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 52dcc84..6474c49 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -964,7 +964,7 @@
 	np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
 	if (!np) {
 		dev_err(&op->dev, "could not find DMA node\n");
-		goto nodev;
+		goto err_iounmap;
 	}
 
 	/* Setup the DMA register accesses, could be DCR or memory mapped */
@@ -978,7 +978,7 @@
 			dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
 		} else {
 			dev_err(&op->dev, "unable to map DMA registers\n");
-			goto nodev;
+			goto err_iounmap;
 		}
 	}
 
@@ -987,7 +987,7 @@
 	if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
 		dev_err(&op->dev, "could not determine irqs\n");
 		rc = -ENOMEM;
-		goto nodev;
+		goto err_iounmap_2;
 	}
 
 	of_node_put(np); /* Finished with the DMA node; drop the reference */
@@ -997,7 +997,7 @@
 	if ((!addr) || (size != 6)) {
 		dev_err(&op->dev, "could not find MAC address\n");
 		rc = -ENODEV;
-		goto nodev;
+		goto err_iounmap_2;
 	}
 	temac_set_mac_address(ndev, (void *)addr);
 
@@ -1013,7 +1013,7 @@
 	rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
 	if (rc) {
 		dev_err(lp->dev, "Error creating sysfs files\n");
-		goto nodev;
+		goto err_iounmap_2;
 	}
 
 	rc = register_netdev(lp->ndev);
@@ -1026,6 +1026,11 @@
 
  err_register_ndev:
 	sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ err_iounmap_2:
+	if (lp->sdma_regs)
+		iounmap(lp->sdma_regs);
+ err_iounmap:
+	iounmap(lp->regs);
  nodev:
 	free_netdev(ndev);
 	ndev = NULL;
@@ -1044,6 +1049,9 @@
 		of_node_put(lp->phy_node);
 	lp->phy_node = NULL;
 	dev_set_drvdata(&op->dev, NULL);
+	iounmap(lp->regs);
+	if (lp->sdma_regs)
+		iounmap(lp->sdma_regs);
 	free_netdev(ndev);
 	return 0;
 }
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 87e8d4c..f15fe2cf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -499,7 +499,7 @@
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static void macvlan_setup(struct net_device *dev)
+void macvlan_common_setup(struct net_device *dev)
 {
 	ether_setup(dev);
 
@@ -508,6 +508,12 @@
 	dev->destructor		= free_netdev;
 	dev->header_ops		= &macvlan_hard_header_ops,
 	dev->ethtool_ops	= &macvlan_ethtool_ops;
+}
+EXPORT_SYMBOL_GPL(macvlan_common_setup);
+
+static void macvlan_setup(struct net_device *dev)
+{
+	macvlan_common_setup(dev);
 	dev->tx_queue_len	= 0;
 }
 
@@ -705,7 +711,6 @@
 	/* common fields */
 	ops->priv_size		= sizeof(struct macvlan_dev);
 	ops->get_tx_queues	= macvlan_get_tx_queues;
-	ops->setup		= macvlan_setup;
 	ops->validate		= macvlan_validate;
 	ops->maxtype		= IFLA_MACVLAN_MAX;
 	ops->policy		= macvlan_policy;
@@ -719,6 +724,7 @@
 
 static struct rtnl_link_ops macvlan_link_ops = {
 	.kind		= "macvlan",
+	.setup		= macvlan_setup,
 	.newlink	= macvlan_newlink,
 	.dellink	= macvlan_dellink,
 };
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index a8a94e2..ff02b83 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -180,11 +180,18 @@
 {
 	struct macvtap_queue *q = macvtap_get_queue(dev, skb);
 	if (!q)
-		return -ENOLINK;
+		goto drop;
+
+	if (skb_queue_len(&q->sk.sk_receive_queue) >= dev->tx_queue_len)
+		goto drop;
 
 	skb_queue_tail(&q->sk.sk_receive_queue, skb);
 	wake_up_interruptible_poll(sk_sleep(&q->sk), POLLIN | POLLRDNORM | POLLRDBAND);
-	return 0;
+	return NET_RX_SUCCESS;
+
+drop:
+	kfree_skb(skb);
+	return NET_RX_DROP;
 }
 
 /*
@@ -235,8 +242,15 @@
 	macvlan_dellink(dev, head);
 }
 
+static void macvtap_setup(struct net_device *dev)
+{
+	macvlan_common_setup(dev);
+	dev->tx_queue_len = TUN_READQ_SIZE;
+}
+
 static struct rtnl_link_ops macvtap_link_ops __read_mostly = {
 	.kind		= "macvtap",
+	.setup		= macvtap_setup,
 	.newlink	= macvtap_newlink,
 	.dellink	= macvtap_dellink,
 };
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 8e9704f5..869f0ea 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -247,7 +247,7 @@
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init mipsnet_probe(struct platform_device *dev)
+static int __devinit mipsnet_probe(struct platform_device *dev)
 {
 	struct net_device *netdev;
 	int err;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index e345ec8..73bb8ea6 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -289,6 +289,7 @@
 	unsigned int t_clk;
 	int extended_rx_coal_limit;
 	int tx_bw_control;
+	int tx_csum_limit;
 };
 
 #define TX_BW_CONTROL_ABSENT		0
@@ -776,13 +777,16 @@
 	l4i_chk = 0;
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		int hdr_len;
 		int tag_bytes;
 
 		BUG_ON(skb->protocol != htons(ETH_P_IP) &&
 		       skb->protocol != htons(ETH_P_8021Q));
 
-		tag_bytes = (void *)ip_hdr(skb) - (void *)skb->data - ETH_HLEN;
-		if (unlikely(tag_bytes & ~12)) {
+		hdr_len = (void *)ip_hdr(skb) - (void *)skb->data;
+		tag_bytes = hdr_len - ETH_HLEN;
+		if (skb->len - hdr_len > mp->shared->tx_csum_limit ||
+		    unlikely(tag_bytes & ~12)) {
 			if (skb_checksum_help(skb) == 0)
 				goto no_csum;
 			kfree_skb(skb);
@@ -2666,6 +2670,7 @@
 	 * Detect hardware parameters.
 	 */
 	msp->t_clk = (pd != NULL && pd->t_clk != 0) ? pd->t_clk : 133000000;
+	msp->tx_csum_limit = pd->tx_csum_limit ? pd->tx_csum_limit : 9 * 1024;
 	infer_hw_params(msp);
 
 	platform_set_drvdata(pdev, msp);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index b8e2923..1063093 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -806,8 +806,10 @@
 		dev->base_addr = res->start;
 		dev->irq = platform_get_irq(pdev, 0);
 	} else {
-		if (this_dev < 0 || this_dev >= MAX_NE_CARDS)
+		if (this_dev < 0 || this_dev >= MAX_NE_CARDS) {
+			free_netdev(dev);
 			return -EINVAL;
+		}
 		dev->base_addr = io[this_dev];
 		dev->irq = irq[this_dev];
 		dev->mem_end = bad[this_dev];
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index f26e547..3a41b6a 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -629,7 +629,8 @@
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n",
 				netdev->name);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto err_out_free;
 	}
 
 	tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 5c496f8..29d7b93d0 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1159,9 +1159,6 @@
 
 	window = CRB_HI(off);
 
-	if (adapter->ahw.crb_win == window)
-		return;
-
 	writel(window, addr);
 	if (readl(addr) != window) {
 		if (printk_ratelimit())
@@ -1169,7 +1166,6 @@
 				"failed to set CRB window to %d off 0x%lx\n",
 				window, off);
 	}
-	adapter->ahw.crb_win = window;
 }
 
 static void __iomem *
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 045a7c8..c865dda 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -218,7 +218,7 @@
 	if (cmd_buf_arr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
 		       netdev->name);
-		return -ENOMEM;
+		goto err_out;
 	}
 	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 	tx_ring->cmd_buf_arr = cmd_buf_arr;
@@ -230,7 +230,7 @@
 	if (rds_ring == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n",
 		       netdev->name);
-		return -ENOMEM;
+		goto err_out;
 	}
 	recv_ctx->rds_rings = rds_ring;
 
@@ -1805,9 +1805,10 @@
 	netxen_ctx_msg msg = 0;
 	struct list_head *head;
 
+	spin_lock(&rds_ring->lock);
+
 	producer = rds_ring->producer;
 
-	spin_lock(&rds_ring->lock);
 	head = &rds_ring->free_list;
 	while (!list_empty(head)) {
 
@@ -1829,7 +1830,6 @@
 
 		producer = get_next_index(producer, rds_ring->num_desc);
 	}
-	spin_unlock(&rds_ring->lock);
 
 	if (count) {
 		rds_ring->producer = producer;
@@ -1853,6 +1853,8 @@
 					NETXEN_RCV_PRODUCER_OFFSET), msg);
 		}
 	}
+
+	spin_unlock(&rds_ring->lock);
 }
 
 static void
@@ -1864,10 +1866,11 @@
 	int producer, count = 0;
 	struct list_head *head;
 
-	producer = rds_ring->producer;
 	if (!spin_trylock(&rds_ring->lock))
 		return;
 
+	producer = rds_ring->producer;
+
 	head = &rds_ring->free_list;
 	while (!list_empty(head)) {
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5b3dfb4..33525bf 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1168,6 +1168,7 @@
 	int interrupts, nr_serviced = 0, i;
 	struct ei_device *ei_local;
     	int handled = 0;
+	unsigned long flags;
 
 	e8390_base = dev->base_addr;
 	ei_local = netdev_priv(dev);
@@ -1176,7 +1177,7 @@
 	 *	Protect the irq test too.
 	 */
 	 
-	spin_lock(&ei_local->page_lock);
+	spin_lock_irqsave(&ei_local->page_lock, flags);
 
 	if (ei_local->irqlock) 
 	{
@@ -1188,7 +1189,7 @@
 			   dev->name, inb_p(e8390_base + EN0_ISR),
 			   inb_p(e8390_base + EN0_IMR));
 #endif
-		spin_unlock(&ei_local->page_lock);
+		spin_unlock_irqrestore(&ei_local->page_lock, flags);
 		return IRQ_NONE;
 	}
     
@@ -1261,7 +1262,7 @@
 	ei_local->irqlock = 0;
 	outb_p(ENISR_ALL, e8390_base + EN0_IMR);
 
-	spin_unlock(&ei_local->page_lock);
+	spin_unlock_irqrestore(&ei_local->page_lock, flags);
 	return IRQ_RETVAL(handled);
 }
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6f77a76..bfdef72 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 7b6fe89..307cd17 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -322,6 +322,7 @@
 	return -ENOMEM;
     smc = netdev_priv(dev);
     smc->p_dev = link;
+    link->priv = dev;
 
     spin_lock_init(&smc->lock);
     link->io.NumPorts1 = 16;
@@ -1504,12 +1505,20 @@
 	writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
 	writeb(cor, smc->base + MOT_LAN + CISREG_COR);
     }
-#ifdef DOES_NOT_WORK
-    if (smc->base != NULL) { /* Megahertz MFC's */
-	readb(smc->base+MEGAHERTZ_ISR);
-	readb(smc->base+MEGAHERTZ_ISR);
+
+    if ((smc->base != NULL) &&  /* Megahertz MFC's */
+	(smc->manfid == MANFID_MEGAHERTZ) &&
+	(smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
+
+	u_char tmp;
+	tmp = readb(smc->base+MEGAHERTZ_ISR);
+	tmp = readb(smc->base+MEGAHERTZ_ISR);
+
+	/* Retrigger interrupt if needed */
+	writeb(tmp, smc->base + MEGAHERTZ_ISR);
+	writeb(tmp, smc->base + MEGAHERTZ_ISR);
     }
-#endif
+
     spin_unlock(&smc->lock);
     return IRQ_RETVAL(handled);
 }
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 8ee929b..29c39ff 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -53,6 +53,9 @@
 
 #define MII_LXT971_ISR		19  /* Interrupt Status Register */
 
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
 
 MODULE_DESCRIPTION("Intel LXT PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -119,6 +122,33 @@
 	return err;
 }
 
+static int lxt973_probe(struct phy_device *phydev)
+{
+	int val = phy_read(phydev, MII_LXT973_PCR);
+
+	if (val & PCR_FIBER_SELECT) {
+		/*
+		 * If fiber is selected, then the only correct setting
+		 * is 100Mbps, full duplex, and auto negotiation off.
+		 */
+		val = phy_read(phydev, MII_BMCR);
+		val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+		val &= ~BMCR_ANENABLE;
+		phy_write(phydev, MII_BMCR, val);
+		/* Remember that the port is in fiber mode. */
+		phydev->priv = lxt973_probe;
+	} else {
+		phydev->priv = NULL;
+	}
+	return 0;
+}
+
+static int lxt973_config_aneg(struct phy_device *phydev)
+{
+	/* Do nothing if port is in fiber mode. */
+	return phydev->priv ? 0 : genphy_config_aneg(phydev);
+}
+
 static struct phy_driver lxt970_driver = {
 	.phy_id		= 0x78100000,
 	.name		= "LXT970",
@@ -146,6 +176,18 @@
 	.driver 	= { .owner = THIS_MODULE,},
 };
 
+static struct phy_driver lxt973_driver = {
+	.phy_id		= 0x00137a10,
+	.name		= "LXT973",
+	.phy_id_mask	= 0xfffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= 0,
+	.probe		= lxt973_probe,
+	.config_aneg	= lxt973_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
 static int __init lxt_init(void)
 {
 	int ret;
@@ -157,9 +199,15 @@
 	ret = phy_driver_register(&lxt971_driver);
 	if (ret)
 		goto err2;
+
+	ret = phy_driver_register(&lxt973_driver);
+	if (ret)
+		goto err3;
 	return 0;
 
- err2:	
+ err3:
+	phy_driver_unregister(&lxt971_driver);
+ err2:
 	phy_driver_unregister(&lxt970_driver);
  err1:
 	return ret;
@@ -169,6 +217,7 @@
 {
 	phy_driver_unregister(&lxt970_driver);
 	phy_driver_unregister(&lxt971_driver);
+	phy_driver_unregister(&lxt973_driver);
 }
 
 module_init(lxt_init);
@@ -177,6 +226,7 @@
 static struct mdio_device_id lxt_tbl[] = {
 	{ 0x78100000, 0xfffffff0 },
 	{ 0x001378e0, 0xfffffff0 },
+	{ 0x00137a10, 0xfffffff0 },
 	{ }
 };
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 78b74e83..5a1bd5d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -29,6 +29,7 @@
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
+#include <linux/marvell_phy.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,8 +49,6 @@
 #define MII_M1145_RGMII_RX_DELAY	0x0080
 #define MII_M1145_RGMII_TX_DELAY	0x0002
 
-#define M1145_DEV_FLAGS_RESISTANCE	0x00000001
-
 #define MII_M1111_PHY_LED_CONTROL	0x18
 #define MII_M1111_PHY_LED_DIRECT	0x4100
 #define MII_M1111_PHY_LED_COMBINE	0x411c
@@ -350,7 +349,10 @@
 		return err;
 
 	/* Adjust LED Control */
-	err = phy_write(phydev, 0x10, 0x021e);
+	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+		err = phy_write(phydev, 0x10, 0x1100);
+	else
+		err = phy_write(phydev, 0x10, 0x021e);
 	if (err < 0)
 		return err;
 
@@ -398,7 +400,7 @@
 		if (err < 0)
 			return err;
 
-		if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
+		if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
 			err = phy_write(phydev, 0x1d, 0x0012);
 			if (err < 0)
 				return err;
@@ -529,8 +531,8 @@
 
 static struct phy_driver marvell_drivers[] = {
 	{
-		.phy_id = 0x01410c60,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1101,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -541,8 +543,8 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410c90,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1112,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1112",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -554,8 +556,8 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cc0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1111,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1111",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -567,8 +569,8 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e10,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1118,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1118",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -580,8 +582,8 @@
 		.driver = {.owner = THIS_MODULE,},
 	},
 	{
-		.phy_id = 0x01410cb0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1121R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -593,8 +595,8 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410cd0,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1145,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1145",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
@@ -606,8 +608,8 @@
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = 0x01410e30,
-		.phy_id_mask = 0xfffffff0,
+		.phy_id = MARVELL_PHY_ID_88E1240,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index c5f8eb1..1b2c291 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1422,7 +1422,7 @@
 		flen = len;
 		if (nfree > 0) {
 			if (pch->speed == 0) {
-				flen = totlen/nfree;
+				flen = len/nfree;
 				if (nbigger > 0) {
 					flen++;
 					nbigger--;
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index fa4b24c..d10bcef 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4611,8 +4611,7 @@
 		return;
 	}
 
-	qdev->timer.expires = jiffies + (5*HZ);
-	add_timer(&qdev->timer);
+	mod_timer(&qdev->timer, jiffies + (5*HZ));
 }
 
 static int __devinit qlge_probe(struct pci_dev *pdev,
@@ -4713,6 +4712,8 @@
 		netif_stop_queue(ndev);
 	}
 
+	/* Disabling the timer */
+	del_timer_sync(&qdev->timer);
 	if (test_bit(QL_ADAPTER_UP, &qdev->flags))
 		cancel_delayed_work_sync(&qdev->asic_reset_work);
 	cancel_delayed_work_sync(&qdev->mpi_reset_work);
@@ -4808,8 +4809,7 @@
 		netif_err(qdev, ifup, qdev->ndev,
 			  "Device was not running prior to EEH.\n");
 	}
-	qdev->timer.expires = jiffies + (5*HZ);
-	add_timer(&qdev->timer);
+	mod_timer(&qdev->timer, jiffies + (5*HZ));
 	netif_device_attach(ndev);
 }
 
@@ -4871,8 +4871,7 @@
 			return err;
 	}
 
-	qdev->timer.expires = jiffies + (5*HZ);
-	add_timer(&qdev->timer);
+	mod_timer(&qdev->timer, jiffies + (5*HZ));
 	netif_device_attach(ndev);
 
 	return 0;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 217e709..cdc6a5c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -559,6 +559,11 @@
 			break;
 		udelay(25);
 	}
+	/*
+	 * According to hardware specs a 20us delay is required after write
+	 * complete indication, but before sending next command.
+	 */
+	udelay(20);
 }
 
 static int mdio_read(void __iomem *ioaddr, int reg_addr)
@@ -578,6 +583,12 @@
 		}
 		udelay(25);
 	}
+	/*
+	 * According to hardware specs a 20us delay is required after read
+	 * complete indication, but before sending next command.
+	 */
+	udelay(20);
+
 	return value;
 }
 
@@ -1305,7 +1316,7 @@
 		{ 0x7c800000, 0x28000000,	RTL_GIGA_MAC_VER_26 },
 
 		/* 8168C family. */
-		{ 0x7cf00000, 0x3ca00000,	RTL_GIGA_MAC_VER_24 },
+		{ 0x7cf00000, 0x3cb00000,	RTL_GIGA_MAC_VER_24 },
 		{ 0x7cf00000, 0x3c900000,	RTL_GIGA_MAC_VER_23 },
 		{ 0x7cf00000, 0x3c800000,	RTL_GIGA_MAC_VER_18 },
 		{ 0x7c800000, 0x3c800000,	RTL_GIGA_MAC_VER_24 },
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 668327c..1d37f0c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3130,7 +3130,6 @@
 		pkt_cnt++;
 
 		/* Updating the statistics block */
-		nic->dev->stats.tx_bytes += skb->len;
 		swstats->mem_freed += skb->truesize;
 		dev_kfree_skb_irq(skb);
 
@@ -4901,48 +4900,81 @@
  *  Return value:
  *  pointer to the updated net_device_stats structure.
  */
-
 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
 {
 	struct s2io_nic *sp = netdev_priv(dev);
-	struct config_param *config = &sp->config;
 	struct mac_info *mac_control = &sp->mac_control;
 	struct stat_block *stats = mac_control->stats_info;
-	int i;
+	u64 delta;
 
 	/* Configure Stats for immediate updt */
 	s2io_updt_stats(sp);
 
-	/* Using sp->stats as a staging area, because reset (due to mtu
-	   change, for example) will clear some hardware counters */
-	dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) -
-		sp->stats.tx_packets;
-	sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms);
+	/* A device reset will cause the on-adapter statistics to be zero'ed.
+	 * This can be done while running by changing the MTU.  To prevent the
+	 * system from having the stats zero'ed, the driver keeps a copy of the
+	 * last update to the system (which is also zero'ed on reset).  This
+	 * enables the driver to accurately know the delta between the last
+	 * update and the current update.
+	 */
+	delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
+		le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets;
+	sp->stats.rx_packets += delta;
+	dev->stats.rx_packets += delta;
 
-	dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) -
-		sp->stats.tx_errors;
-	sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms);
+	delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 |
+		le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets;
+	sp->stats.tx_packets += delta;
+	dev->stats.tx_packets += delta;
 
-	dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) -
-		sp->stats.rx_errors;
-	sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms);
+	delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
+		le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes;
+	sp->stats.rx_bytes += delta;
+	dev->stats.rx_bytes += delta;
 
-	dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) -
-		sp->stats.multicast;
-	sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms);
+	delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
+		le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes;
+	sp->stats.tx_bytes += delta;
+	dev->stats.tx_bytes += delta;
 
-	dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) -
-		sp->stats.rx_length_errors;
-	sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms);
+	delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors;
+	sp->stats.rx_errors += delta;
+	dev->stats.rx_errors += delta;
 
-	/* collect per-ring rx_packets and rx_bytes */
-	dev->stats.rx_packets = dev->stats.rx_bytes = 0;
-	for (i = 0; i < config->rx_ring_num; i++) {
-		struct ring_info *ring = &mac_control->rings[i];
+	delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
+		le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors;
+	sp->stats.tx_errors += delta;
+	dev->stats.tx_errors += delta;
 
-		dev->stats.rx_packets += ring->rx_packets;
-		dev->stats.rx_bytes += ring->rx_bytes;
-	}
+	delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped;
+	sp->stats.rx_dropped += delta;
+	dev->stats.rx_dropped += delta;
+
+	delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped;
+	sp->stats.tx_dropped += delta;
+	dev->stats.tx_dropped += delta;
+
+	/* The adapter MAC interprets pause frames as multicast packets, but
+	 * does not pass them up.  This erroneously increases the multicast
+	 * packet count and needs to be deducted when the multicast frame count
+	 * is queried.
+	 */
+	delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
+		le32_to_cpu(stats->rmac_vld_mcst_frms);
+	delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms);
+	delta -= sp->stats.multicast;
+	sp->stats.multicast += delta;
+	dev->stats.multicast += delta;
+
+	delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
+		le32_to_cpu(stats->rmac_usized_frms)) +
+		le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors;
+	sp->stats.rx_length_errors += delta;
+	dev->stats.rx_length_errors += delta;
+
+	delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors;
+	sp->stats.rx_crc_errors += delta;
+	dev->stats.rx_crc_errors += delta;
 
 	return &dev->stats;
 }
@@ -7455,15 +7487,11 @@
 		}
 	}
 
-	/* Updating statistics */
-	ring_data->rx_packets++;
 	rxdp->Host_Control = 0;
 	if (sp->rxd_mode == RXD_MODE_1) {
 		int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
 
-		ring_data->rx_bytes += len;
 		skb_put(skb, len);
-
 	} else if (sp->rxd_mode == RXD_MODE_3B) {
 		int get_block = ring_data->rx_curr_get_info.block_index;
 		int get_off = ring_data->rx_curr_get_info.offset;
@@ -7472,7 +7500,6 @@
 		unsigned char *buff = skb_push(skb, buf0_len);
 
 		struct buffAdd *ba = &ring_data->ba[get_block][get_off];
-		ring_data->rx_bytes += buf0_len + buf2_len;
 		memcpy(buff, ba->ba_0, buf0_len);
 		skb_put(skb, buf2_len);
 	}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 47c36e0..7f3a53d 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -65,7 +65,7 @@
 
 /* DEBUG message print. */
 #define DBG_PRINT(dbg_level, fmt, args...) do {			\
-	if (dbg_level >= debug_level)				\
+	if (dbg_level <= debug_level)				\
 		pr_info(fmt, ##args);				\
 	} while (0)
 
@@ -745,10 +745,6 @@
 
 	/* Buffer Address store. */
 	struct buffAdd **ba;
-
-	/* per-Ring statistics */
-	unsigned long rx_packets;
-	unsigned long rx_bytes;
 } ____cacheline_aligned;
 
 /* Fifo specific structure */
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 1f3acc3..79eee30 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2671,6 +2671,7 @@
 	.remove = __exit_p(sbmac_remove),
 	.driver = {
 		.name = sbmac_string,
+		.owner  = THIS_MODULE,
 	},
 };
 
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 2e6fd89..4762c91 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -830,7 +830,7 @@
 
 static inline unsigned int efx_port_num(struct efx_nic *efx)
 {
-	return PCI_FUNC(efx->pci_dev->devfn);
+	return efx->net_dev->dev_id;
 }
 
 /**
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 727b422..f2b1e61 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -206,6 +206,7 @@
 {
 	struct siena_nic_data *nic_data;
 	bool already_attached = 0;
+	efx_oword_t reg;
 	int rc;
 
 	/* Allocate storage for hardware specific data */
@@ -220,6 +221,9 @@
 		goto fail1;
 	}
 
+	efx_reado(efx, &reg, FR_AZ_CS_DEBUG);
+	efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
+
 	efx_mcdi_init(efx);
 
 	/* Recover from a failed assertion before probing */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2111c7b..7985165 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -717,11 +717,24 @@
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 }
 
+/* Enable Rx/Tx */
+static void sky2_enable_rx_tx(struct sky2_port *sky2)
+{
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	u16 reg;
+
+	reg = gma_read16(hw, port, GM_GP_CTRL);
+	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+	gma_write16(hw, port, GM_GP_CTRL, reg);
+}
+
 /* Force a renegotiation */
 static void sky2_phy_reinit(struct sky2_port *sky2)
 {
 	spin_lock_bh(&sky2->phy_lock);
 	sky2_phy_init(sky2->hw, sky2->port);
+	sky2_enable_rx_tx(sky2);
 	spin_unlock_bh(&sky2->phy_lock);
 }
 
@@ -2040,7 +2053,6 @@
 {
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
-	u16 reg;
 	static const char *fc_name[] = {
 		[FC_NONE]	= "none",
 		[FC_TX]		= "tx",
@@ -2048,10 +2060,7 @@
 		[FC_BOTH]	= "both",
 	};
 
-	/* enable Rx/Tx */
-	reg = gma_read16(hw, port, GM_GP_CTRL);
-	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
-	gma_write16(hw, port, GM_GP_CTRL, reg);
+	sky2_enable_rx_tx(sky2);
 
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 20ab161..737df60 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -646,7 +646,7 @@
 		error = copy_from_user(data, ifr->ifr_data, sizeof(data));
 		if (error) {
 			pr_err("cant copy from user\n");
-			RET(error);
+			RET(-EFAULT);
 		}
 		DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
 	}
@@ -665,7 +665,7 @@
 		    data[2]);
 		error = copy_to_user(ifr->ifr_data, data, sizeof(data));
 		if (error)
-			RET(error);
+			RET(-EFAULT);
 		break;
 
 	case BDX_OP_WRITE:
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index c0e7000..06b552f 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -367,8 +367,8 @@
 static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
 
 
-#define dr32(reg)		readl(de->regs + (reg))
-#define dw32(reg,val)		writel((val), de->regs + (reg))
+#define dr32(reg)	ioread32(de->regs + (reg))
+#define dw32(reg, val)	iowrite32((val), de->regs + (reg))
 
 
 static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
@@ -1706,6 +1706,7 @@
 		int value, boguscnt = 100000;
 		do {
 			value = dr32(ROMCmd);
+			rmb();
 		} while (value < 0 && --boguscnt > 0);
 		de->dev->dev_addr[i] = value;
 		udelay(1);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 6ad6fe7..6304259 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -736,8 +736,18 @@
 				gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
 			else if (sinfo->gso_type & SKB_GSO_UDP)
 				gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
-			else
-				BUG();
+			else {
+				printk(KERN_ERR "tun: unexpected GSO type: "
+				       "0x%x, gso_size %d, hdr_len %d\n",
+				       sinfo->gso_type, gso.gso_size,
+				       gso.hdr_len);
+				print_hex_dump(KERN_ERR, "tun: ",
+					       DUMP_PREFIX_NONE,
+					       16, 1, skb->head,
+					       min((int)gso.hdr_len, 64), true);
+				WARN_ON_ONCE(1);
+				return -EINVAL;
+			}
 			if (sinfo->gso_type & SKB_GSO_TCP_ECN)
 				gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
 		} else
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4a34833..807470e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3215,6 +3215,8 @@
 					   __func__, __LINE__, (u32) skb);
 			if (skb) {
 				skb->data = skb->head + NET_SKB_PAD;
+				skb->len = 0;
+				skb_reset_tail_pointer(skb);
 				__skb_queue_head(&ugeth->rx_recycle, skb);
 			}
 
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 1f802e90..9516f38 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -344,7 +344,7 @@
 			return 2;
 		}
 
-		if (size > ETH_FRAME_LEN) {
+		if (size > dev->net->mtu + ETH_HLEN) {
 			netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
 				   size);
 			return 0;
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 0a3c41f..4dd2351 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1334,7 +1334,6 @@
 	/* check for port already opened, if not set the termios */
 	serial->open_count++;
 	if (serial->open_count == 1) {
-		tty->low_latency = 1;
 		serial->rx_state = RX_IDLE;
 		/* Force default termio settings */
 		_hso_serial_set_termios(tty, NULL);
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 28d3ee1..dd8a4ad 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -104,10 +104,8 @@
 int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
 {
 	struct cdc_state	*info = (void *) &dev->data;
-	struct usb_cdc_notification notification;
 	int			master_ifnum;
 	int			retval;
-	int			partial;
 	unsigned		count;
 	__le32			rsp;
 	u32			xid = 0, msg_len, request_id;
@@ -135,17 +133,13 @@
 	if (unlikely(retval < 0 || xid == 0))
 		return retval;
 
-	/* Some devices don't respond on the control channel until
-	 * polled on the status channel, so do that first. */
-	retval = usb_interrupt_msg(
-		dev->udev,
-		usb_rcvintpipe(dev->udev, dev->status->desc.bEndpointAddress),
-		&notification, sizeof(notification), &partial,
-		RNDIS_CONTROL_TIMEOUT_MS);
-	if (unlikely(retval < 0))
-		return retval;
+	// FIXME Seems like some devices discard responses when
+	// we time out and cancel our "get response" requests...
+	// so, this is fragile.  Probably need to poll for status.
 
-	/* Poll the control channel; the request probably completed immediately */
+	/* ignore status endpoint, just poll the control channel;
+	 * the request probably completed immediately
+	 */
 	rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
 	for (count = 0; count < 10; count++) {
 		memset(buf, 0, CONTROL_BUFFER_SIZE);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a95c73d..81c76ad 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1293,6 +1293,9 @@
 		goto out;
 	}
 
+	/* netdev_printk() needs this so do it as early as possible */
+	SET_NETDEV_DEV(net, &udev->dev);
+
 	dev = netdev_priv(net);
 	dev->udev = xdev;
 	dev->intf = udev;
@@ -1377,8 +1380,6 @@
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 
-	SET_NETDEV_DEV(net, &udev->dev);
-
 	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
 		SET_NETDEV_DEVTYPE(net, &wlan_type);
 	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 1edb7a6..bb6b67f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -415,7 +415,7 @@
 static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
 {
 	int err;
-	bool oom = false;
+	bool oom;
 
 	do {
 		if (vi->mergeable_rx_bufs)
@@ -425,10 +425,9 @@
 		else
 			err = add_recvbuf_small(vi, gfp);
 
-		if (err < 0) {
-			oom = true;
+		oom = err == -ENOMEM;
+		if (err < 0)
 			break;
-		}
 		++vi->num;
 	} while (err > 0);
 	if (unlikely(vi->num > vi->max))
@@ -563,7 +562,6 @@
 	struct virtnet_info *vi = netdev_priv(dev);
 	int capacity;
 
-again:
 	/* Free up any pending old buffers before queueing new ones. */
 	free_old_xmit_skbs(vi);
 
@@ -572,14 +570,20 @@
 
 	/* This can happen with OOM and indirect buffers. */
 	if (unlikely(capacity < 0)) {
-		netif_stop_queue(dev);
-		dev_warn(&dev->dev, "Unexpected full queue\n");
-		if (unlikely(!virtqueue_enable_cb(vi->svq))) {
-			virtqueue_disable_cb(vi->svq);
-			netif_start_queue(dev);
-			goto again;
+		if (net_ratelimit()) {
+			if (likely(capacity == -ENOMEM)) {
+				dev_warn(&dev->dev,
+					 "TX queue failure: out of memory\n");
+			} else {
+				dev->stats.tx_fifo_errors++;
+				dev_warn(&dev->dev,
+					 "Unexpected TX queue failure: %d\n",
+					 capacity);
+			}
 		}
-		return NETDEV_TX_BUSY;
+		dev->stats.tx_dropped++;
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 	virtqueue_kick(vi->svq);
 
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index b504bd5..fc8b2d7 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2262,7 +2262,8 @@
 		vxge_debug_init(VXGE_ERR,
 			"%s: memory allocation failed",
 			VXGE_DRIVER_NAME);
-		return  -ENOMEM;
+		ret = -ENOMEM;
+		goto alloc_entries_failed;
 	}
 
 	vdev->vxge_entries =
@@ -2271,8 +2272,8 @@
 	if (!vdev->vxge_entries) {
 		vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
 			VXGE_DRIVER_NAME);
-		kfree(vdev->entries);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto alloc_vxge_entries_failed;
 	}
 
 	for (i = 0, j = 0; i < vdev->no_of_vpath; i++) {
@@ -2303,22 +2304,32 @@
 		vxge_debug_init(VXGE_ERR,
 			"%s: MSI-X enable failed for %d vectors, ret: %d",
 			VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
+		if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+			ret = -ENODEV;
+			goto enable_msix_failed;
+		}
+
 		kfree(vdev->entries);
 		kfree(vdev->vxge_entries);
 		vdev->entries = NULL;
 		vdev->vxge_entries = NULL;
-
-		if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3))
-			return -ENODEV;
 		/* Try with less no of vector by reducing no of vpaths count */
 		temp = (ret - 1)/2;
 		vxge_close_vpaths(vdev, temp);
 		vdev->no_of_vpath = temp;
 		goto start;
-	} else if (ret < 0)
-		return -ENODEV;
-
+	} else if (ret < 0) {
+		ret = -ENODEV;
+		goto enable_msix_failed;
+	}
 	return 0;
+
+enable_msix_failed:
+	kfree(vdev->vxge_entries);
+alloc_vxge_entries_failed:
+	kfree(vdev->entries);
+alloc_entries_failed:
+	return ret;
 }
 
 static int vxge_enable_msix(struct vxgedev *vdev)
@@ -4506,9 +4517,9 @@
 	char version[32];
 	snprintf(version, 32, "%s", DRV_VERSION);
 
-	printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n",
+	printk(KERN_INFO "%s: Copyright(c) 2002-2009 Neterion Inc\n",
 		VXGE_DRIVER_NAME);
-	printk(KERN_CRIT "%s: Driver version: %s\n",
+	printk(KERN_INFO "%s: Driver version: %s\n",
 			VXGE_DRIVER_NAME, version);
 
 	verify_bandwidth();
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 166e77d..e47f5a9 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -37,8 +37,6 @@
 #include <net/x25device.h>
 #include "x25_asy.h"
 
-#include <net/x25device.h>
-
 static struct net_device **x25_asy_devs;
 static int x25_asy_maxdev = SL_NRUNIT;
 
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 3f283bf..1149135 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -1192,7 +1192,7 @@
 	unsigned module_type, header_len, major_version, minor_version,
 		module_id, module_vendor, date, size;
 
-	module_type = bcf_hdr->module_type;
+	module_type = le32_to_cpu(bcf_hdr->module_type);
 	header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len);
 	major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000)
 		>> 16;
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 2d7c96d..eb80243 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -152,6 +152,7 @@
 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
 	USB_DEVICE_ID_I6050_2 = 0x0188,
+	USB_DEVICE_ID_I6250 = 0x0187,
 };
 
 
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 0d5081d..d3365ac 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -491,6 +491,7 @@
 	switch (id->idProduct) {
 	case USB_DEVICE_ID_I6050:
 	case USB_DEVICE_ID_I6050_2:
+	case USB_DEVICE_ID_I6250:
 		i2400mu->i6050 = 1;
 		break;
 	default:
@@ -739,6 +740,7 @@
 struct usb_device_id i2400mu_id_table[] = {
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
+	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },
 	{ USB_DEVICE(0x8086, 0x1405) },
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index e0c244b..31c0080 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -126,6 +126,7 @@
 	ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT;
 	ah->ah_noise_floor = -95;	/* until first NF calibration is run */
 	sc->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO;
+	ah->ah_current_channel = &sc->channels[0];
 
 	/*
 	 * Find the mac version
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index cc6d41d..648972d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -195,7 +195,7 @@
 static int __devinit	ath5k_pci_probe(struct pci_dev *pdev,
 				const struct pci_device_id *id);
 static void __devexit	ath5k_pci_remove(struct pci_dev *pdev);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int		ath5k_pci_suspend(struct device *dev);
 static int		ath5k_pci_resume(struct device *dev);
 
@@ -203,7 +203,7 @@
 #define ATH5K_PM_OPS	(&ath5k_pm_ops)
 #else
 #define ATH5K_PM_OPS	NULL
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
 
 static struct pci_driver ath5k_pci_driver = {
 	.name		= KBUILD_MODNAME,
@@ -222,7 +222,6 @@
 static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
 		struct ath5k_txq *txq);
 static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
-static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
 static int ath5k_add_interface(struct ieee80211_hw *hw,
@@ -709,7 +708,7 @@
 	ieee80211_free_hw(hw);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ath5k_pci_suspend(struct device *dev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
@@ -735,7 +734,7 @@
 	ath5k_led_enable(sc);
 	return 0;
 }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
 
 
 /***********************\
@@ -2770,7 +2769,7 @@
 {
 	struct ath5k_softc *sc = (void *)data;
 
-	ath5k_reset_wake(sc);
+	ath5k_reset(sc, sc->curchan);
 }
 
 /*
@@ -2941,23 +2940,13 @@
 	ath5k_beacon_config(sc);
 	/* intrs are enabled by ath5k_beacon_config */
 
+	ieee80211_wake_queues(sc->hw);
+
 	return 0;
 err:
 	return ret;
 }
 
-static int
-ath5k_reset_wake(struct ath5k_softc *sc)
-{
-	int ret;
-
-	ret = ath5k_reset(sc, sc->curchan);
-	if (!ret)
-		ieee80211_wake_queues(sc->hw);
-
-	return ret;
-}
-
 static int ath5k_start(struct ieee80211_hw *hw)
 {
 	return ath5k_init(hw->priv);
@@ -3151,13 +3140,15 @@
 
 	if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
 		if (*new_flags & FIF_PROMISC_IN_BSS) {
-			rfilt |= AR5K_RX_FILTER_PROM;
 			__set_bit(ATH_STAT_PROMISC, sc->status);
 		} else {
 			__clear_bit(ATH_STAT_PROMISC, sc->status);
 		}
 	}
 
+	if (test_bit(ATH_STAT_PROMISC, sc->status))
+		rfilt |= AR5K_RX_FILTER_PROM;
+
 	/* Note, AR5K_RX_FILTER_MCAST is already enabled */
 	if (*new_flags & FIF_ALLMULTI) {
 		mfilt[0] =  ~0;
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1b81c47..492cbb1 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1814,6 +1814,13 @@
 	u8 def_ant, tx_ant, ee_mode;
 	u32 sta_id1 = 0;
 
+	/* if channel is not initialized yet we can't set the antennas
+	 * so just store the mode. it will be set on the next reset */
+	if (channel == NULL) {
+		ah->ah_ant_mode = ant_mode;
+		return;
+	}
+
 	def_ant = ah->ah_def_ant;
 
 	ATH5K_TRACE(ah->ah_sc);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index fbb7dec..5ea8773 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -445,6 +445,7 @@
 #define SC_OP_TSF_RESET              BIT(11)
 #define SC_OP_BT_PRIORITY_DETECTED   BIT(12)
 #define SC_OP_BT_SCAN		     BIT(13)
+#define SC_OP_ANI_RUN		     BIT(14)
 
 /* Powersave flags */
 #define PS_WAIT_FOR_BEACON        BIT(0)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 77b3591..23c15aa 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -730,13 +730,17 @@
 
 	/* RX */
 	if (ath9k_hif_usb_alloc_rx_urbs(hif_dev) < 0)
-		goto err;
+		goto err_rx;
 
 	/* Register Read */
 	if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0)
-		goto err;
+		goto err_reg;
 
 	return 0;
+err_reg:
+	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
+err_rx:
+	ath9k_hif_usb_dealloc_tx_urbs(hif_dev);
 err:
 	return -ENOMEM;
 }
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index abfa049..1e2a68e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -336,6 +336,10 @@
 static void ath_start_ani(struct ath_common *common)
 {
 	unsigned long timestamp = jiffies_to_msecs(jiffies);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (!(sc->sc_flags & SC_OP_ANI_RUN))
+		return;
 
 	common->ani.longcal_timer = timestamp;
 	common->ani.shortcal_timer = timestamp;
@@ -872,11 +876,13 @@
 		/* Reset rssi stats */
 		sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 
+		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
 	} else {
 		ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 		common->curaid = 0;
 		/* Stop ANI */
+		sc->sc_flags &= ~SC_OP_ANI_RUN;
 		del_timer_sync(&common->ani.timer);
 	}
 }
@@ -1478,8 +1484,10 @@
 
 	if (vif->type == NL80211_IFTYPE_AP    ||
 	    vif->type == NL80211_IFTYPE_ADHOC ||
-	    vif->type == NL80211_IFTYPE_MONITOR)
+	    vif->type == NL80211_IFTYPE_MONITOR) {
+		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
+	}
 
 out:
 	mutex_unlock(&sc->mutex);
@@ -1500,6 +1508,7 @@
 	mutex_lock(&sc->mutex);
 
 	/* Stop ANI */
+	sc->sc_flags &= ~SC_OP_ANI_RUN;
 	del_timer_sync(&common->ani.timer);
 
 	/* Reclaim beacon resources */
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ca6065b7..e3e5291 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -844,9 +844,9 @@
 	int dma_type;
 
 	if (edma)
-		dma_type = DMA_FROM_DEVICE;
-	else
 		dma_type = DMA_BIDIRECTIONAL;
+	else
+		dma_type = DMA_FROM_DEVICE;
 
 	qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
 	spin_lock_bh(&sc->rx.rxbuflock);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index db72461..29b31a6 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -594,6 +594,7 @@
 	local_info_t *local;
 	int ret = 1;
 	struct hostap_cs_priv *hw_priv;
+	unsigned long flags;
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
@@ -625,9 +626,15 @@
 	local->hw_priv = hw_priv;
 	hw_priv->link = link;
 
+	/*
+	 * Make sure the IRQ handler cannot proceed until at least
+	 * dev->base_addr is initialized.
+	 */
+	spin_lock_irqsave(&local->irq_init_lock, flags);
+
 	ret = pcmcia_request_irq(link, prism2_interrupt);
 	if (ret)
-		goto failed;
+		goto failed_unlock;
 
 	/*
 	 * This actually configures the PCMCIA socket -- setting up
@@ -636,11 +643,13 @@
 	 */
 	ret = pcmcia_request_configuration(link, &link->conf);
 	if (ret)
-		goto failed;
+		goto failed_unlock;
 
 	dev->irq = link->irq;
 	dev->base_addr = link->io.BasePort1;
 
+	spin_unlock_irqrestore(&local->irq_init_lock, flags);
+
 	/* Finally, report what we've done */
 	printk(KERN_INFO "%s: index 0x%02x: ",
 	       dev_info, link->conf.ConfigIndex);
@@ -667,6 +676,8 @@
 
 	return ret;
 
+ failed_unlock:
+	 spin_unlock_irqrestore(&local->irq_init_lock, flags);
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index d707328..2f999fc 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -2618,17 +2618,20 @@
 	int events = 0;
 	u16 ev;
 
+	iface = netdev_priv(dev);
+	local = iface->local;
+
 	/* Detect early interrupt before driver is fully configued */
+	spin_lock(&local->irq_init_lock);
 	if (!dev->base_addr) {
 		if (net_ratelimit()) {
 			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
 			       dev->name);
 		}
+		spin_unlock(&local->irq_init_lock);
 		return IRQ_HANDLED;
 	}
-
-	iface = netdev_priv(dev);
-	local = iface->local;
+	spin_unlock(&local->irq_init_lock);
 
 	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
 
@@ -3147,6 +3150,7 @@
 	spin_lock_init(&local->cmdlock);
 	spin_lock_init(&local->baplock);
 	spin_lock_init(&local->lock);
+	spin_lock_init(&local->irq_init_lock);
 	mutex_init(&local->rid_bap_mtx);
 
 	if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index d24dc7d..972a9c3 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -330,6 +330,7 @@
 
         dev->irq = pdev->irq;
         hw_priv->mem_start = mem;
+	dev->base_addr = (unsigned long) mem;
 
 	prism2_pci_cor_sreset(local);
 
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 3d23891..1ba33be 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -654,7 +654,7 @@
 	rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
 			      * when removing entries from the list.
 			      * TX and RX paths can use read lock. */
-	spinlock_t cmdlock, baplock, lock;
+	spinlock_t cmdlock, baplock, lock, irq_init_lock;
 	struct mutex rid_bap_mtx;
 	u16 infofid; /* MAC buffer id for info frame */
 	/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 068f7f8..c44a303e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2852,6 +2852,7 @@
 	.isr = iwl_isr_legacy,
 	.config_ap = iwl3945_config_ap,
 	.manage_ibss_station = iwl3945_manage_ibss_station,
+	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl3945_good_plcp_health,
 
 	.debugfs_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 44ef5d9..01658cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -212,11 +212,7 @@
 static void iwlagn_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
 			__le32 *tx_flags)
 {
-	if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
-	    (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
-		*tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
-	else
-		*tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK;
+	*tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
 }
 
 /* Calc max signal level (dBm) among 3 possible receivers */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 1004cfc..0f292a2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1119,10 +1119,9 @@
 					   struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	const struct iwl_channel_info *ch_info;
 	u16 passive_dwell = 0;
 	u16 active_dwell = 0;
-	int i, added = 0;
+	int added = 0;
 	u16 channel = 0;
 
 	sband = iwl_get_hw_mode(priv, band);
@@ -1137,32 +1136,7 @@
 	if (passive_dwell <= active_dwell)
 		passive_dwell = active_dwell + 1;
 
-	/* only scan single channel, good enough to reset the RF */
-	/* pick the first valid not in-use channel */
-	if (band == IEEE80211_BAND_5GHZ) {
-		for (i = 14; i < priv->channel_count; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-				channel = priv->channel_info[i].channel;
-				ch_info = iwl_get_channel_info(priv,
-					band, channel);
-				if (is_channel_valid(ch_info))
-					break;
-			}
-		}
-	} else {
-		for (i = 0; i < 14; i++) {
-			if (priv->channel_info[i].channel !=
-			    le16_to_cpu(priv->staging_rxon.channel)) {
-					channel =
-						priv->channel_info[i].channel;
-					ch_info = iwl_get_channel_info(priv,
-						band, channel);
-					if (is_channel_valid(ch_info))
-						break;
-			}
-		}
-	}
+	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index c402bfc..7d614c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -1125,6 +1125,7 @@
 	struct ieee80211_sta *sta;
 	struct iwl_station_priv *sta_priv;
 
+	rcu_read_lock();
 	sta = ieee80211_find_sta(priv->vif, hdr->addr1);
 	if (sta) {
 		sta_priv = (void *)sta->drv_priv;
@@ -1133,6 +1134,7 @@
 		    atomic_dec_return(&sta_priv->pending_frames) == 0)
 			ieee80211_sta_block_awake(priv->hw, sta, false);
 	}
+	rcu_read_unlock();
 
 	ieee80211_tx_status_irqsafe(priv->hw, skb);
 }
@@ -1297,6 +1299,11 @@
 	sta_id = ba_resp->sta_id;
 	tid = ba_resp->tid;
 	agg = &priv->stations[sta_id].tid[tid].agg;
+	if (unlikely(agg->txq_id != scd_flow)) {
+		IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n",
+			scd_flow, agg->txq_id);
+		return;
+	}
 
 	/* Find index just before block-ack window */
 	index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index aef4f71..24aff65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1484,6 +1484,156 @@
 }
 
 
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t show_debug_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
+}
+static ssize_t store_debug_level(struct device *d,
+				struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret)
+		IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
+	else {
+		priv->debug_level = val;
+		if (iwl_alloc_traffic_mem(priv))
+			IWL_ERR(priv,
+				"Not enough memory to generate traffic log\n");
+	}
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+			show_debug_level, store_debug_level);
+
+
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+
+static ssize_t show_temperature(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", priv->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
+
+static ssize_t show_tx_power(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	if (!iwl_is_ready_rf(priv))
+		return sprintf(buf, "off\n");
+	else
+		return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
+}
+
+static ssize_t store_tx_power(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		IWL_INFO(priv, "%s is not in decimal form.\n", buf);
+	else {
+		ret = iwl_set_tx_power(priv, val, false);
+		if (ret)
+			IWL_ERR(priv, "failed setting tx power (0x%d).\n",
+				ret);
+		else
+			ret = count;
+	}
+	return ret;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
+
+static ssize_t show_rts_ht_protection(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	return sprintf(buf, "%s\n",
+		priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
+}
+
+static ssize_t store_rts_ht_protection(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		IWL_INFO(priv, "Input is not in decimal form.\n");
+	else {
+		if (!iwl_is_associated(priv))
+			priv->cfg->use_rts_for_ht = val ? true : false;
+		else
+			IWL_ERR(priv, "Sta associated with AP - "
+				"Change protection mechanism is not allowed\n");
+		ret = count;
+	}
+	return ret;
+}
+
+static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
+			show_rts_ht_protection, store_rts_ht_protection);
+
+
+static struct attribute *iwl_sysfs_entries[] = {
+	&dev_attr_temperature.attr,
+	&dev_attr_tx_power.attr,
+	&dev_attr_rts_ht_protection.attr,
+#ifdef CONFIG_IWLWIFI_DEBUG
+	&dev_attr_debug_level.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group iwl_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = iwl_sysfs_entries,
+};
+
 /******************************************************************************
  *
  * uCode download functions
@@ -1965,6 +2115,13 @@
 	if (err)
 		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
 
+	err = sysfs_create_group(&priv->pci_dev->dev.kobj,
+					&iwl_attribute_group);
+	if (err) {
+		IWL_ERR(priv, "failed to create sysfs device attributes\n");
+		goto out_unbind;
+	}
+
 	/* We have our copies now, allow OS release its copies */
 	release_firmware(ucode_raw);
 	complete(&priv->_agn.firmware_loading_complete);
@@ -3234,10 +3391,12 @@
 	int ret;
 	u8 sta_id;
 
-	sta_priv->common.sta_id = IWL_INVALID_STATION;
-
 	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->common.sta_id = IWL_INVALID_STATION;
 
 	atomic_set(&sta_priv->pending_frames, 0);
 	if (vif->type == NL80211_IFTYPE_AP)
@@ -3249,6 +3408,7 @@
 		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
 			sta->addr, ret);
 		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&priv->mutex);
 		return ret;
 	}
 
@@ -3258,147 +3418,13 @@
 	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl_rs_rate_init(priv, sta, sta_id);
+	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
 
 /*****************************************************************************
  *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
-				struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	unsigned long val;
-	int ret;
-
-	ret = strict_strtoul(buf, 0, &val);
-	if (ret)
-		IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
-	else {
-		priv->debug_level = val;
-		if (iwl_alloc_traffic_mem(priv))
-			IWL_ERR(priv,
-				"Not enough memory to generate traffic log\n");
-	}
-	return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
-			show_debug_level, store_debug_level);
-
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-
-static ssize_t show_temperature(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	return sprintf(buf, "%d\n", priv->temperature);
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	if (!iwl_is_ready_rf(priv))
-		return sprintf(buf, "off\n");
-	else
-		return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	unsigned long val;
-	int ret;
-
-	ret = strict_strtoul(buf, 10, &val);
-	if (ret)
-		IWL_INFO(priv, "%s is not in decimal form.\n", buf);
-	else {
-		ret = iwl_set_tx_power(priv, val, false);
-		if (ret)
-			IWL_ERR(priv, "failed setting tx power (0x%d).\n",
-				ret);
-		else
-			ret = count;
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_rts_ht_protection(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	return sprintf(buf, "%s\n",
-		priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
-}
-
-static ssize_t store_rts_ht_protection(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	unsigned long val;
-	int ret;
-
-	ret = strict_strtoul(buf, 10, &val);
-	if (ret)
-		IWL_INFO(priv, "Input is not in decimal form.\n");
-	else {
-		if (!iwl_is_associated(priv))
-			priv->cfg->use_rts_for_ht = val ? true : false;
-		else
-			IWL_ERR(priv, "Sta associated with AP - "
-				"Change protection mechanism is not allowed\n");
-		ret = count;
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
-			show_rts_ht_protection, store_rts_ht_protection);
-
-
-/*****************************************************************************
- *
  * driver setup and teardown
  *
  *****************************************************************************/
@@ -3550,21 +3576,6 @@
 	kfree(priv->scan_cmd);
 }
 
-static struct attribute *iwl_sysfs_entries[] = {
-	&dev_attr_temperature.attr,
-	&dev_attr_tx_power.attr,
-	&dev_attr_rts_ht_protection.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
-	&dev_attr_debug_level.attr,
-#endif
-	NULL
-};
-
-static struct attribute_group iwl_attribute_group = {
-	.name = NULL,		/* put in device directory */
-	.attrs = iwl_sysfs_entries,
-};
-
 static struct ieee80211_ops iwl_hw_ops = {
 	.tx = iwl_mac_tx,
 	.start = iwl_mac_start,
@@ -3750,11 +3761,6 @@
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
 		goto out_disable_msi;
 	}
-	err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
-	if (err) {
-		IWL_ERR(priv, "failed to create sysfs device attributes\n");
-		goto out_free_irq;
-	}
 
 	iwl_setup_deferred_work(priv);
 	iwl_setup_rx_handlers(priv);
@@ -3788,15 +3794,13 @@
 
 	err = iwl_request_firmware(priv, true);
 	if (err)
-		goto out_remove_sysfs;
+		goto out_destroy_workqueue;
 
 	return 0;
 
- out_remove_sysfs:
+ out_destroy_workqueue:
 	destroy_workqueue(priv->workqueue);
 	priv->workqueue = NULL;
-	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
- out_free_irq:
 	free_irq(priv->pci_dev->irq, priv);
 	iwl_free_isr_ict(priv);
  out_disable_msi:
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5a7eca8..5bbc529 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -854,6 +854,45 @@
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
+/* Return valid channel */
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band)
+{
+	const struct iwl_channel_info *ch_info;
+	int i;
+	u8 channel = 0;
+
+	/* only scan single channel, good enough to reset the RF */
+	/* pick the first valid not in-use channel */
+	if (band == IEEE80211_BAND_5GHZ) {
+		for (i = 14; i < priv->channel_count; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+				channel = priv->channel_info[i].channel;
+				ch_info = iwl_get_channel_info(priv,
+					band, channel);
+				if (is_channel_valid(ch_info))
+					break;
+			}
+		}
+	} else {
+		for (i = 0; i < 14; i++) {
+			if (priv->channel_info[i].channel !=
+			    le16_to_cpu(priv->staging_rxon.channel)) {
+					channel =
+						priv->channel_info[i].channel;
+					ch_info = iwl_get_channel_info(priv,
+						band, channel);
+					if (is_channel_valid(ch_info))
+						break;
+			}
+		}
+	}
+
+	return channel;
+}
+EXPORT_SYMBOL(iwl_get_single_channel_number);
+
 /**
  * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
@@ -1275,7 +1314,6 @@
 			changed_flags, *total_flags);
 
 	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
-	CHK(FIF_ALLMULTI, RXON_FILTER_ACCEPT_GRP_MSK);
 	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
 	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
 
@@ -1290,6 +1328,12 @@
 
 	mutex_unlock(&priv->mutex);
 
+	/*
+	 * Receiving all multicast frames is always enabled by the
+	 * default flags setup in iwl_connection_init_rx_config()
+	 * since we currently do not support programming multicast
+	 * filters into the device.
+	 */
 	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
 			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7e5a5ba..31775bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -343,6 +343,8 @@
 int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+				  enum ieee80211_band band);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 5d3f51f..386c5f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -491,6 +491,7 @@
 
 	mutex_lock(&priv->mutex);
 
+	cancel_delayed_work_sync(&priv->scan_check);
 	set_bit(STATUS_SCAN_ABORTING, &priv->status);
 	iwl_send_scan_abort(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 83a2636..c27c13f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1373,10 +1373,14 @@
 
 	IWL_DEBUG_INFO(priv, "received request to remove station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n",
+			sta->addr);
 	ret = iwl_remove_station(priv, sta_common->sta_id, sta->addr);
 	if (ret)
 		IWL_ERR(priv, "Error removing station %pM\n",
 			sta->addr);
+	mutex_unlock(&priv->mutex);
 	return ret;
 }
 EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index c2a453a..dc43ebd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -97,6 +97,17 @@
 	spin_lock_irqsave(&priv->sta_lock, flags);
 	memset(priv->stations, 0, sizeof(priv->stations));
 	priv->num_stations = 0;
+
+	/*
+	 * Remove all key information that is not stored as part of station
+	 * information since mac80211 may not have had a
+	 * chance to remove all the keys. When device is reconfigured by
+	 * mac80211 after an error all keys will be reconfigured.
+	 */
+	priv->ucode_key_table = 0;
+	priv->key_mapping_key = 0;
+	memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 3e5bffb..a27872d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1844,6 +1844,49 @@
 #endif
 }
 
+static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
+					       struct ieee80211_vif *vif,
+					       enum ieee80211_band band,
+					       struct iwl3945_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u8 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+
+	channel = iwl_get_single_channel_number(priv, band);
+
+	if (channel) {
+		scan_ch->channel = channel;
+		scan_ch->type = 0;	/* passive */
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 					 enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -2992,9 +3035,16 @@
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	scan->channel_count =
-		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
-			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	if (priv->is_internal_short_scan) {
+		scan->channel_count =
+			iwl3945_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[le16_to_cpu(
+				scan->tx_cmd.len)]);
+	} else {
+		scan->channel_count =
+			iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
+	}
 
 	if (scan->channel_count == 0) {
 		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
@@ -3387,10 +3437,13 @@
 	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
 	u8 sta_id;
 
-	sta_priv->common.sta_id = IWL_INVALID_STATION;
-
 	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
 			sta->addr);
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->common.sta_id = IWL_INVALID_STATION;
+
 
 	ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
 				     &sta_id);
@@ -3398,6 +3451,7 @@
 		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
 			sta->addr, ret);
 		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&priv->mutex);
 		return ret;
 	}
 
@@ -3407,6 +3461,7 @@
 	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
 		       sta->addr);
 	iwl3945_rs_rate_init(priv, sta, sta_id);
+	mutex_unlock(&priv->mutex);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 6a04c21..817fffc 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -549,7 +549,7 @@
 
 	prxpd = (struct rxpd *) skb->data;
 
-	stats.flag = 0;
+	memset(&stats, 0, sizeof(stats));
 	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
 		stats.flag |= RX_FLAG_FAILED_FCS_CRC;
 	stats.freq = priv->cur_freq;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 07c4528..a5ea89c 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -41,6 +41,8 @@
 	{ PCI_DEVICE(0x1260, 0x3877) },
 	/* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
 	{ PCI_DEVICE(0x1260, 0x3886) },
+	/* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
+	{ PCI_DEVICE(0x1260, 0xffff) },
 	{ },
 };
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index d5b197b..7307325 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -80,6 +80,7 @@
 	{USB_DEVICE(0x1413, 0x5400)},   /* Telsey 802.11g USB2.0 Adapter */
 	{USB_DEVICE(0x1435, 0x0427)},	/* Inventel UR054G */
 	{USB_DEVICE(0x2001, 0x3704)},	/* DLink DWL-G122 rev A2 */
+	{USB_DEVICE(0x413c, 0x5513)},	/* Dell WLA3310 USB Wireless Adapter */
 	{USB_DEVICE(0x413c, 0x8102)},	/* Spinnaker DUT */
 	{USB_DEVICE(0x413c, 0x8104)},	/* Cohiba Proto board */
 	{}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3ae468c..f20d3ee 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -854,6 +854,11 @@
 		    BIT(NL80211_IFTYPE_WDS);
 
 	/*
+	 * Initialize configuration work.
+	 */
+	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+
+	/*
 	 * Let the driver probe the device to detect the capabilities.
 	 */
 	retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
@@ -863,11 +868,6 @@
 	}
 
 	/*
-	 * Initialize configuration work.
-	 */
-	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
-
-	/*
 	 * Allocate queue array.
 	 */
 	retval = rt2x00queue_allocate(rt2x00dev);
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index d234285..c561332 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -259,6 +259,7 @@
 	sdio_disable_func(func);
 release:
 	sdio_release_host(func);
+	wl1251_free_hw(wl);
 	return ret;
 }
 
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 188bc84..d02be78 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -176,16 +176,18 @@
 	size_t count, loff_t *pos)
 {
 	void *data = PDE(file->f_path.dentry->d_inode)->data;
-	char *cur, lbuf[count + 1];
+	char *cur, lbuf[32];
 	int d;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
-	memset(lbuf, 0, count + 1);
+	if (count >= sizeof(lbuf))
+		count = sizeof(lbuf)-1;
 
 	if (copy_from_user(lbuf, buf, count))
 		return -EFAULT;
+	lbuf[count] = 0;
 
 	cur = lbuf;
 
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index b3e5580..4952c3b 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -828,7 +828,14 @@
 			pci_name(pdev), err);
 		return err;
 	}
+
 	bus = pdev->subordinate;
+	if (!bus) {
+		dev_notice(&pdev->dev, "the device is not a bridge, "
+				"skipping\n");
+		rc = -ENODEV;
+		goto err_disable_device;
+	}
 
 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
 	 * discovery
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 796828f..c9171be 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -340,7 +340,7 @@
 int dmar_disabled = 1;
 #endif /*CONFIG_DMAR_DEFAULT_ON*/
 
-static int __initdata dmar_map_gfx = 1;
+static int dmar_map_gfx = 1;
 static int dmar_forcedac;
 static int intel_iommu_strict;
 
@@ -1874,14 +1874,15 @@
 			}
 		}
 		if (found) {
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 			free_devinfo_mem(info);
 			domain_exit(domain);
 			domain = found;
 		} else {
 			list_add(&info->link, &domain->devices);
 			list_add(&info->global, &device_domain_list);
+			spin_unlock_irqrestore(&device_domain_lock, flags);
 		}
-		spin_unlock_irqrestore(&device_domain_lock, flags);
 	}
 
 found_domain:
@@ -3603,7 +3604,8 @@
 		pte = dmar_domain->pgd;
 		if (dma_pte_present(pte)) {
 			free_pgtable_page(dmar_domain->pgd);
-			dmar_domain->pgd = (struct dma_pte *)dma_pte_addr(pte);
+			dmar_domain->pgd = (struct dma_pte *)
+				phys_to_virt(dma_pte_addr(pte));
 		}
 		dmar_domain->agaw--;
 	}
@@ -3719,6 +3721,12 @@
 	 */
 	printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
 	rwbf_quirk = 1;
+
+	/* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
+	if (dev->revision == 0x07) {
+		printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
+		dmar_map_gfx = 0;
+	}
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index afd2fbf..c9957f6 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1035,39 +1035,6 @@
 	return retval;
 }
 
-static void pci_remove_slot_links(struct pci_dev *dev)
-{
-	char func[10];
-	struct pci_slot *slot;
-
-	sysfs_remove_link(&dev->dev.kobj, "slot");
-	list_for_each_entry(slot, &dev->bus->slots, list) {
-		if (slot->number != PCI_SLOT(dev->devfn))
-			continue;
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		sysfs_remove_link(&slot->kobj, func);
-	}
-}
-
-static int pci_create_slot_links(struct pci_dev *dev)
-{
-	int result = 0;
-	char func[10];
-	struct pci_slot *slot;
-
-	list_for_each_entry(slot, &dev->bus->slots, list) {
-		if (slot->number != PCI_SLOT(dev->devfn))
-			continue;
-		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
-		if (result)
-			goto out;
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
-	}
-out:
-	return result;
-}
-
 int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 {
 	int retval;
@@ -1130,8 +1097,6 @@
 	if (retval)
 		goto err_vga_file;
 
-	pci_create_slot_links(pdev);
-
 	return 0;
 
 err_vga_file:
@@ -1181,8 +1146,6 @@
 	if (!sysfs_initialized)
 		return;
 
-	pci_remove_slot_links(pdev);
-
 	pci_remove_capabilities_sysfs(pdev);
 
 	if (pdev->cfg_size < PCI_CFG_SPACE_EXP_SIZE)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 60f30e7..740fb4e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2292,6 +2292,7 @@
 		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
 	}
 }
+EXPORT_SYMBOL_GPL(pci_msi_off);
 
 #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index aac285a..d672a0a 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -34,7 +34,7 @@
  * being registered.  Consequently, the interrupt-based PCIe PME signaling will
  * not be used by any PCIe root ports in that case.
  */
-static bool pcie_pme_disabled;
+static bool pcie_pme_disabled = true;
 
 /*
  * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
@@ -64,12 +64,19 @@
 
 static int __init pcie_pme_setup(char *str)
 {
-	if (!strcmp(str, "off"))
-		pcie_pme_disabled = true;
-	else if (!strcmp(str, "force"))
+	if (!strncmp(str, "auto", 4))
+		pcie_pme_disabled = false;
+	else if (!strncmp(str, "force", 5))
 		pcie_pme_force_enable = true;
-	else if (!strcmp(str, "nomsi"))
-		pcie_pme_msi_disabled = true;
+
+	str = strchr(str, ',');
+	if (str) {
+		str++;
+		str += strspn(str, " \t");
+		if (*str && !strcmp(str, "nomsi"))
+			pcie_pme_msi_disabled = true;
+	}
+
 	return 1;
 }
 __setup("pcie_pme=", pcie_pme_setup);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b7512cf..477345d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1457,7 +1457,8 @@
 	conf5 &= ~(1 << 24);  /* Clear bit 24 */
 
 	switch (pdev->device) {
-	case PCI_DEVICE_ID_JMICRON_JMB360:
+	case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+	case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
 		/* The controller should be in single function ahci mode */
 		conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
 		break;
@@ -1493,12 +1494,14 @@
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 17bed18..2aaa131 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -97,16 +97,16 @@
 
 	root = pci_find_parent_resource(dev, res);
 	if (!root) {
-		dev_err(&dev->dev, "no compatible bridge window for %pR\n",
-			res);
+		dev_info(&dev->dev, "no compatible bridge window for %pR\n",
+			 res);
 		return -EINVAL;
 	}
 
 	conflict = request_resource_conflict(root, res);
 	if (conflict) {
-		dev_err(&dev->dev,
-			"address space collision: %pR conflicts with %s %pR\n",
-			res, conflict->name, conflict);
+		dev_info(&dev->dev,
+			 "address space collision: %pR conflicts with %s %pR\n",
+			 res, conflict->name, conflict);
 		return -EBUSY;
 	}
 
@@ -156,6 +156,38 @@
 					     pcibios_align_resource, dev);
 	}
 
+	if (ret < 0 && dev->fw_addr[resno]) {
+		struct resource *root, *conflict;
+		resource_size_t start, end;
+
+		/*
+		 * If we failed to assign anything, let's try the address
+		 * where firmware left it.  That at least has a chance of
+		 * working, which is better than just leaving it disabled.
+		 */
+
+		if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			root = &iomem_resource;
+
+		start = res->start;
+		end = res->end;
+		res->start = dev->fw_addr[resno];
+		res->end = res->start + size - 1;
+		dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
+			 resno, res);
+		conflict = request_resource_conflict(root, res);
+		if (conflict) {
+			dev_info(&dev->dev,
+				 "BAR %d: %pR conflicts with %s %pR\n", resno,
+				 res, conflict->name, conflict);
+			res->start = start;
+			res->end = end;
+		} else
+			ret = 0;
+	}
+
 	if (!ret) {
 		res->flags &= ~IORESOURCE_STARTALIGN;
 		dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index e0189cf..659eaa0f 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -97,50 +97,6 @@
 	return bus_speed_read(slot->bus->cur_bus_speed, buf);
 }
 
-static void remove_sysfs_files(struct pci_slot *slot)
-{
-	char func[10];
-	struct list_head *tmp;
-
-	list_for_each(tmp, &slot->bus->devices) {
-		struct pci_dev *dev = pci_dev_b(tmp);
-		if (PCI_SLOT(dev->devfn) != slot->number)
-			continue;
-		sysfs_remove_link(&dev->dev.kobj, "slot");
-
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		sysfs_remove_link(&slot->kobj, func);
-	}
-}
-
-static int create_sysfs_files(struct pci_slot *slot)
-{
-	int result;
-	char func[10];
-	struct list_head *tmp;
-
-	list_for_each(tmp, &slot->bus->devices) {
-		struct pci_dev *dev = pci_dev_b(tmp);
-		if (PCI_SLOT(dev->devfn) != slot->number)
-			continue;
-
-		result = sysfs_create_link(&dev->dev.kobj, &slot->kobj, "slot");
-		if (result)
-			goto fail;
-
-		snprintf(func, 10, "function%d", PCI_FUNC(dev->devfn));
-		result = sysfs_create_link(&slot->kobj, &dev->dev.kobj, func);
-		if (result)
-			goto fail;
-	}
-
-	return 0;
-
-fail:
-	remove_sysfs_files(slot);
-	return result;
-}
-
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -153,8 +109,6 @@
 		if (PCI_SLOT(dev->devfn) == slot->number)
 			dev->slot = NULL;
 
-	remove_sysfs_files(slot);
-
 	list_del(&slot->list);
 
 	kfree(slot);
@@ -346,8 +300,6 @@
 	INIT_LIST_HEAD(&slot->list);
 	list_add(&slot->list, &parent->slots);
 
-	create_sysfs_files(slot);
-
 	list_for_each_entry(dev, &parent->devices, bus_list)
 		if (PCI_SLOT(dev->devfn) == slot_nr)
 			dev->slot = slot;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7ef7ade..eac9614 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -671,6 +671,7 @@
 		if (old_funcs != new_funcs) {
 			/* we need to re-start */
 			pcmcia_card_remove(s, NULL);
+			s->functions = 0;
 			pcmcia_card_add(s);
 		}
 	}
@@ -1355,6 +1356,7 @@
 	INIT_LIST_HEAD(&socket->devices_list);
 	memset(&socket->pcmcia_state, 0, sizeof(u8));
 	socket->device_count = 0;
+	atomic_set(&socket->present, 0);
 
 	ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
 	if (ret) {
@@ -1363,8 +1365,6 @@
 		return ret;
 	}
 
-	atomic_set(&socket->present, 0);
-
 	return 0;
 }
 
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 29f91fa..a4cd9ad 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -857,8 +857,10 @@
 {
 	pcmcia_release_configuration(p_dev);
 	pcmcia_release_io(p_dev, &p_dev->io);
-	if (p_dev->_irq)
+	if (p_dev->_irq) {
 		free_irq(p_dev->irq, p_dev->priv);
+		p_dev->_irq = 0;
+	}
 	if (p_dev->win)
 		pcmcia_release_window(p_dev, p_dev->win);
 }
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index df4532e..f370476 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -178,7 +178,6 @@
 			       unsigned long val,
 			       struct cpufreq_freqs *freqs)
 {
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
 	switch (val) {
 	case CPUFREQ_PRECHANGE:
 		if (freqs->new > freqs->old) {
@@ -186,7 +185,7 @@
 			       "pre-updating\n",
 			       freqs->new / 1000, (freqs->new / 100) % 10,
 			       freqs->old / 1000, (freqs->old / 100) % 10);
-			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+			pxa2xx_pcmcia_set_timing(skt);
 		}
 		break;
 
@@ -196,7 +195,7 @@
 			       "post-updating\n",
 			       freqs->new / 1000, (freqs->new / 100) % 10,
 			       freqs->old / 1000, (freqs->old / 100) % 10);
-			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+			pxa2xx_pcmcia_set_timing(skt);
 		}
 		break;
 	}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 424e576..f1d4137 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -880,6 +880,12 @@
 		.restore_state	= ti_restore_state,
 		.sock_init	= ti_init,
 	},
+	[CARDBUS_TYPE_ENE]	= {
+		.override	= ene_override,
+		.save_state	= ti_save_state,
+		.restore_state	= ti_restore_state,
+		.sock_init	= ti_init,
+	},
 #endif
 #ifdef CONFIG_YENTA_RICOH
 	[CARDBUS_TYPE_RICOH]	= {
@@ -902,14 +908,6 @@
 		.restore_state	= o2micro_restore_state,
 	},
 #endif
-#ifdef CONFIG_YENTA_TI
-	[CARDBUS_TYPE_ENE]	= {
-		.override	= ene_override,
-		.save_state	= ti_save_state,
-		.restore_state	= ti_restore_state,
-		.sock_init	= ti_init,
-	},
-#endif
 };
 
 
@@ -975,7 +973,7 @@
 /* probes the PCI interrupt, use only on override functions */
 static int yenta_probe_cb_irq(struct yenta_socket *socket)
 {
-	u8 reg;
+	u8 reg = 0;
 
 	if (!socket->cb_irq)
 		return -1;
@@ -989,7 +987,8 @@
 	}
 
 	/* generate interrupt, wait */
-	reg = exca_readb(socket, I365_CSCINT);
+	if (!socket->dev->irq)
+		reg = exca_readb(socket, I365_CSCINT);
 	exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG);
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 40658e3..bb2f1fba 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -489,7 +489,7 @@
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
-	ipc_command(cmd << 12 | sub);
+	ipc_command(sub << 12 | cmd);
 	err = busy_loop();
 	mutex_unlock(&ipclock);
 	return err;
@@ -501,9 +501,9 @@
  *	@cmd: command
  *	@sub: sub type
  *	@in: input data
- *	@inlen: input length
+ *	@inlen: input length in dwords
  *	@out: output data
- *	@outlein: output length
+ *	@outlein: output length in dwords
  *
  *	Issue a command to the SCU which involves data transfers. Do the
  *	data copies under the lock but leave it for the caller to interpret
@@ -524,7 +524,7 @@
 	for (i = 0; i < inlen; i++)
 		ipc_data_writel(*in++, 4 * i);
 
-	ipc_command((cmd << 12) | sub | (inlen << 18));
+	ipc_command((sub << 12) | cmd | (inlen << 18));
 	err = busy_loop();
 
 	for (i = 0; i < outlen; i++)
@@ -556,6 +556,10 @@
 	u32 cmd = 0;
 
 	mutex_lock(&ipclock);
+	if (ipcdev.pdev == NULL) {
+		mutex_unlock(&ipclock);
+		return -ENODEV;
+	}
 	cmd = (addr >> 24) & 0xFF;
 	if (cmd == IPC_I2C_READ) {
 		writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index d762a0c..84d3c43 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -43,10 +43,9 @@
 struct ds278x_info;
 
 struct ds278x_battery_ops {
-	int	(*get_current)(struct ds278x_info *info, int *current_uA);
-	int	(*get_voltage)(struct ds278x_info *info, int *voltage_uA);
-	int	(*get_capacity)(struct ds278x_info *info, int *capacity_uA);
-
+	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA);
+	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA);
 };
 
 #define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
@@ -163,7 +162,7 @@
 	if (err)
 		return err;
 	*capacity = raw;
-	return raw;
+	return 0;
 }
 
 static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
@@ -213,11 +212,11 @@
 	int current_uA;
 	int capacity;
 
-	err = info->ops->get_current(info, &current_uA);
+	err = info->ops->get_battery_current(info, &current_uA);
 	if (err)
 		return err;
 
-	err = info->ops->get_capacity(info, &capacity);
+	err = info->ops->get_battery_capacity(info, &capacity);
 	if (err)
 		return err;
 
@@ -246,15 +245,15 @@
 		break;
 
 	case POWER_SUPPLY_PROP_CAPACITY:
-		ret = info->ops->get_capacity(info, &val->intval);
+		ret = info->ops->get_battery_capacity(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		ret = info->ops->get_voltage(info, &val->intval);
+		ret = info->ops->get_battery_voltage(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
-		ret = info->ops->get_current(info, &val->intval);
+		ret = info->ops->get_battery_current(info, &val->intval);
 		break;
 
 	case POWER_SUPPLY_PROP_TEMP:
@@ -307,14 +306,14 @@
 
 static struct ds278x_battery_ops ds278x_ops[] = {
 	[DS2782] = {
-		.get_current  = ds2782_get_current,
-		.get_voltage  = ds2782_get_voltage,
-		.get_capacity = ds2782_get_capacity,
+		.get_battery_current  = ds2782_get_current,
+		.get_battery_voltage  = ds2782_get_voltage,
+		.get_battery_capacity = ds2782_get_capacity,
 	},
 	[DS2786] = {
-		.get_current  = ds2786_get_current,
-		.get_voltage  = ds2786_get_voltage,
-		.get_capacity = ds2786_get_capacity,
+		.get_battery_current  = ds2786_get_current,
+		.get_battery_voltage  = ds2786_get_voltage,
+		.get_battery_capacity = ds2786_get_capacity,
 	}
 };
 
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index 9cca465..85064a9 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -9,19 +9,13 @@
  *
  */
 
-#include <linux/init.h>
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-#include <linux/i2c.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
 #include <linux/z2_battery.h>
 
 #define	Z2_DEFAULT_NAME	"Z2"
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 7b14a67..1179099 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -286,7 +286,7 @@
 {
 	struct ab3100_regulator *abreg = reg->reg_data;
 
-	if (selector > abreg->voltages_len)
+	if (selector >= abreg->voltages_len)
 		return -EINVAL;
 	return abreg->typ_voltages[selector];
 }
@@ -318,7 +318,7 @@
 	regval &= 0xE0;
 	regval >>= 5;
 
-	if (regval > abreg->voltages_len) {
+	if (regval >= abreg->voltages_len) {
 		dev_err(&reg->dev,
 			"regulator register %02x contains an illegal voltage setting\n",
 			abreg->regreg);
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 14b45762..8152d65 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/mfd/tps6507x.h>
@@ -101,9 +102,12 @@
 	unsigned max_uV;
 	u8 table_len;
 	const u16 *table;
+
+	/* Does DCDC high or the low register defines output voltage? */
+	bool defdcdc_default;
 };
 
-static const struct tps_info tps6507x_pmic_regs[] = {
+static struct tps_info tps6507x_pmic_regs[] = {
 	{
 		.name = "VDCDC1",
 		.min_uV = 725000,
@@ -145,7 +149,7 @@
 	struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
 	struct tps6507x_dev *mfd;
 	struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
-	const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+	struct tps_info *info[TPS6507X_NUM_REGULATOR];
 	struct mutex io_lock;
 };
 static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
@@ -341,10 +345,16 @@
 		reg = TPS6507X_REG_DEFDCDC1;
 		break;
 	case TPS6507X_DCDC_2:
-		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC2_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC2_LOW;
 		break;
 	case TPS6507X_DCDC_3:
-		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC3_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC3_LOW;
 		break;
 	default:
 		return -EINVAL;
@@ -370,10 +380,16 @@
 		reg = TPS6507X_REG_DEFDCDC1;
 		break;
 	case TPS6507X_DCDC_2:
-		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC2_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC2_LOW;
 		break;
 	case TPS6507X_DCDC_3:
-		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		if (tps->info[dcdc]->defdcdc_default)
+			reg = TPS6507X_REG_DEFDCDC3_HIGH;
+		else
+			reg = TPS6507X_REG_DEFDCDC3_LOW;
 		break;
 	default:
 		return -EINVAL;
@@ -532,7 +548,7 @@
 {
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
 	static int desc_id;
-	const struct tps_info *info = &tps6507x_pmic_regs[0];
+	struct tps_info *info = &tps6507x_pmic_regs[0];
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
 	struct tps6507x_pmic *tps;
@@ -569,6 +585,12 @@
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
 		/* Register the regulators */
 		tps->info[i] = info;
+		if (init_data->driver_data) {
+			struct tps6507x_reg_platform_data *data =
+							init_data->driver_data;
+			tps->info[i]->defdcdc_default = data->defdcdc_default;
+		}
+
 		tps->desc[i].name = info->name;
 		tps->desc[i].id = desc_id++;
 		tps->desc[i].n_voltages = num_voltages[i];
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 723cd1f..0e6ed7d 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1495,7 +1495,7 @@
 	if (ret != 0) {
 		dev_err(wm8350->dev, "Failed to register regulator %d: %d\n",
 			reg, ret);
-		platform_device_del(pdev);
+		platform_device_put(pdev);
 		wm8350->pmic.pdev[reg] = NULL;
 	}
 
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 92a8f6c..34647fc 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -29,6 +29,7 @@
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 /*
  * The DaVinci RTC is a simple RTC with the following
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index de033b7a..d827ce5 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -777,7 +777,7 @@
 
 read_rtc:
 	/* read RTC registers */
-	tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+	tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
 	if (tmp != 8) {
 		pr_debug("read error %d\n", tmp);
 		err = -EIO;
@@ -862,7 +862,7 @@
 		if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
 			tmp += 12;
 		i2c_smbus_write_byte_data(client,
-				DS1307_REG_HOUR,
+				ds1307->offset + DS1307_REG_HOUR,
 				bin2bcd(tmp));
 	}
 
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 3587d99..71bbefc 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -456,7 +456,7 @@
 	.irq_set_freq = pl031_irq_set_freq,
 };
 
-static struct amba_id pl031_ids[] __initdata = {
+static struct amba_id pl031_ids[] = {
 	{
 		.id = 0x00041031,
 		.mask = 0x000fffff,
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index 9718aaa..600b890 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -168,7 +168,7 @@
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
 		(data | RX8581_CTRL_STOP));
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
@@ -182,6 +182,20 @@
 		return -EIO;
 	}
 
+	/* get VLF and clear it */
+	data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read flag register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+		(data & ~(RX8581_FLAG_VLF)));
+	if (err != 0) {
+		dev_err(&client->dev, "Unable to write flag register\n");
+		return -EIO;
+	}
+
 	/* Restart the clock */
 	data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
 	if (data < 0) {
@@ -189,8 +203,8 @@
 		return -EIO;
 	}
 
-	err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
-		(data | ~(RX8581_CTRL_STOP)));
+	err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+		(data & ~(RX8581_CTRL_STOP)));
 	if (err != 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
 		return -EIO;
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index e5972b2..70b68d3 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -495,8 +495,6 @@
  	pr_debug("s3c2410_rtc: RTCCON=%02x\n",
 		 readb(s3c_rtc_base + S3C2410_RTCCON));
 
-	s3c_rtc_setfreq(&pdev->dev, 1);
-
 	device_init_wakeup(&pdev->dev, 1);
 
 	/* register RTC and exit */
@@ -510,14 +508,17 @@
 		goto err_nortc;
 	}
 
+	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
 		rtc->max_user_freq = 32768;
 	else
 		rtc->max_user_freq = 128;
 
-	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
-
 	platform_set_drvdata(pdev, rtc);
+
+	s3c_rtc_setfreq(&pdev->dev, 1);
+
 	return 0;
 
  err_nortc:
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 34d51dd..bed7b46 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -948,8 +948,10 @@
 	if (device->discipline && device->discipline->get_uid &&
 	    !device->discipline->get_uid(device, &uid)) {
 		if (uid.type == UA_BASE_PAV_ALIAS ||
-		    uid.type == UA_HYPER_PAV_ALIAS)
+		    uid.type == UA_HYPER_PAV_ALIAS) {
+			dasd_put_device(device);
 			return sprintf(buf, "1\n");
+		}
 	}
 	dasd_put_device(device);
 
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index ce7cb87..407d0e9 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -713,7 +713,7 @@
 	ret = chsc_determine_channel_path_desc(chpid, 0, 0, 0, 0, chsc_resp);
 	if (ret)
 		goto out_free;
-	memcpy(desc, &chsc_resp->data, chsc_resp->length);
+	memcpy(desc, &chsc_resp->data, sizeof(*desc));
 out_free:
 	kfree(chsc_resp);
 	return ret;
diff --git a/drivers/s390/cio/itcw.c b/drivers/s390/cio/itcw.c
index 17da9ab..a0ae295 100644
--- a/drivers/s390/cio/itcw.c
+++ b/drivers/s390/cio/itcw.c
@@ -42,7 +42,7 @@
  * size_t size;
  *
  * size = itcw_calc_size(1, 2, 0);
- * buffer = kmalloc(size, GFP_DMA);
+ * buffer = kmalloc(size, GFP_KERNEL | GFP_DMA);
  * if (!buffer)
  *	return -ENOMEM;
  * itcw = itcw_init(buffer, size, ITCW_OP_READ, 1, 2, 0);
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index e3dbeda..fd068bc 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -714,6 +714,14 @@
 	if (zfcp_erp_adapter_strategy_open_fsf_xport(act) == ZFCP_ERP_FAILED)
 		return ZFCP_ERP_FAILED;
 
+	if (mempool_resize(act->adapter->pool.status_read_data,
+			   act->adapter->stat_read_buf_num, GFP_KERNEL))
+		return ZFCP_ERP_FAILED;
+
+	if (mempool_resize(act->adapter->pool.status_read_req,
+			   act->adapter->stat_read_buf_num, GFP_KERNEL))
+		return ZFCP_ERP_FAILED;
+
 	atomic_set(&act->adapter->stat_miss, act->adapter->stat_read_buf_num);
 	if (zfcp_status_read_refill(act->adapter))
 		return ZFCP_ERP_FAILED;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 9ac6a6e..71663fb 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -496,7 +496,8 @@
 
 	adapter->hydra_version = bottom->adapter_type;
 	adapter->timer_ticks = bottom->timer_interval;
-	adapter->stat_read_buf_num = max(bottom->status_read_buf_num, (u16)16);
+	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
+					 (u16)FSF_STATUS_READS_RECOM);
 
 	if (fc_host_permanent_port_name(shost) == -1)
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
@@ -719,11 +720,6 @@
 	zfcp_qdio_req_init(adapter->qdio, &req->qdio_req, req->req_id, sbtype,
 			   req->qtcb, sizeof(struct fsf_qtcb));
 
-	if (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP)) {
-		zfcp_fsf_req_free(req);
-		return ERR_PTR(-EIO);
-	}
-
 	return req;
 }
 
@@ -981,7 +977,7 @@
 	}
 
 	/* use single, unchained SBAL if it can hold the request */
-	if (zfcp_qdio_sg_one_sbale(sg_req) || zfcp_qdio_sg_one_sbale(sg_resp)) {
+	if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp)) {
 		zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req,
 						sg_req, sg_resp);
 		return 0;
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 28117e1..6fa5e04 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -251,7 +251,8 @@
 	struct zfcp_qdio_queue *req_q = &qdio->req_q;
 
 	spin_lock_bh(&qdio->req_q_lock);
-	if (atomic_read(&req_q->count))
+	if (atomic_read(&req_q->count) ||
+	    !(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return 1;
 	spin_unlock_bh(&qdio->req_q_lock);
 	return 0;
@@ -274,8 +275,13 @@
 	spin_unlock_bh(&qdio->req_q_lock);
 	ret = wait_event_interruptible_timeout(qdio->req_q_wq,
 			       zfcp_qdio_sbal_check(qdio), 5 * HZ);
+
+	if (!(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
+		return -EIO;
+
 	if (ret > 0)
 		return 0;
+
 	if (!ret) {
 		atomic_inc(&qdio->req_q_full);
 		/* assume hanging outbound queue, try queue recovery */
@@ -375,6 +381,8 @@
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
 	spin_unlock_bh(&qdio->req_q_lock);
 
+	wake_up(&qdio->req_q_wq);
+
 	qdio_shutdown(qdio->adapter->ccw_device,
 		      QDIO_FLAG_CLEANUP_USING_CLEAR);
 
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index d53e62a..aacbe14 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -554,7 +554,7 @@
 static int openprom_bsd_ioctl(struct file * file,
 			      unsigned int cmd, unsigned long arg)
 {
-	DATA *data = (DATA *) file->private_data;
+	DATA *data = file->private_data;
 	void __user *argp = (void __user *)arg;
 	int err;
 
@@ -601,7 +601,7 @@
 static long openprom_ioctl(struct file * file,
 			   unsigned int cmd, unsigned long arg)
 {
-	DATA *data = (DATA *) file->private_data;
+	DATA *data = file->private_data;
 
 	switch (cmd) {
 	case OPROMGETOPT:
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index a864ccc..989b9a8 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -277,6 +277,12 @@
 		goto reg_crq_failed;
 	}
 
+	queue->cur = 0;
+	spin_lock_init(&queue->lock);
+
+	tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
+		     (unsigned long)hostdata);
+
 	if (request_irq(vdev->irq,
 			rpavscsi_handle_event,
 			0, "ibmvscsi", (void *)hostdata) != 0) {
@@ -291,15 +297,10 @@
 		goto req_irq_failed;
 	}
 
-	queue->cur = 0;
-	spin_lock_init(&queue->lock);
-
-	tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
-		     (unsigned long)hostdata);
-
 	return retrc;
 
       req_irq_failed:
+	tasklet_kill(&hostdata->srp_task);
 	do {
 		rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
 	} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 82ea4a8..f820cff 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1129,20 +1129,22 @@
 }
 
 /**
- * ipr_format_resource_path - Format the resource path for printing.
+ * ipr_format_res_path - Format the resource path for printing.
  * @res_path:	resource path
  * @buf:	buffer
  *
  * Return value:
  * 	pointer to buffer
  **/
-static char *ipr_format_resource_path(u8 *res_path, char *buffer)
+static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
 {
 	int i;
+	char *p = buffer;
 
-	sprintf(buffer, "%02X", res_path[0]);
-	for (i=1; res_path[i] != 0xff; i++)
-		sprintf(buffer, "%s-%02X", buffer, res_path[i]);
+	res_path[0] = '\0';
+	p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+	for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
+		p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
 
 	return buffer;
 }
@@ -1187,7 +1189,8 @@
 
 		if (res->sdev && new_path)
 			sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
-				    ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+				    ipr_format_res_path(res->res_path, buffer,
+							sizeof(buffer)));
 	} else {
 		res->flags = cfgtew->u.cfgte->flags;
 		if (res->flags & IPR_IS_IOA_RESOURCE)
@@ -1573,7 +1576,8 @@
 		ipr_err_separator;
 
 		ipr_err("Device %d : %s", i + 1,
-			 ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
+			 ipr_format_res_path(dev_entry->res_path, buffer,
+					     sizeof(buffer)));
 		ipr_log_ext_vpd(&dev_entry->vpd);
 
 		ipr_err("-----New Device Information-----\n");
@@ -1919,13 +1923,14 @@
 
 			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
 				     path_active_desc[i].desc, path_state_desc[j].desc,
-				     ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+				     ipr_format_res_path(fabric->res_path, buffer,
+							 sizeof(buffer)));
 			return;
 		}
 	}
 
 	ipr_err("Path state=%02X Resource Path=%s\n", path_state,
-		ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+		ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
 }
 
 static const struct {
@@ -2066,7 +2071,8 @@
 
 			ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
 				     path_status_desc[j].desc, path_type_desc[i].desc,
-				     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+				     ipr_format_res_path(cfg->res_path, buffer,
+							 sizeof(buffer)),
 				     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
 				     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
 			return;
@@ -2074,7 +2080,7 @@
 	}
 	ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
 		     "WWN=%08X%08X\n", cfg->type_status,
-		     ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+		     ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
 		     link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
 		     be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
 }
@@ -2139,7 +2145,7 @@
 
 	ipr_err("RAID %s Array Configuration: %s\n",
 		error->protection_level,
-		ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
+		ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
 
 	ipr_err_separator;
 
@@ -2160,9 +2166,11 @@
 		ipr_err("Array Member %d:\n", i);
 		ipr_log_ext_vpd(&array_entry->vpd);
 		ipr_err("Current Location: %s",
-			 ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
+			 ipr_format_res_path(array_entry->res_path, buffer,
+					     sizeof(buffer)));
 		ipr_err("Expected Location: %s",
-			 ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
+			 ipr_format_res_path(array_entry->expected_res_path,
+					     buffer, sizeof(buffer)));
 
 		ipr_err_separator;
 	}
@@ -4079,7 +4087,8 @@
 };
 
 /**
- * ipr_show_resource_path - Show the resource path for this device.
+ * ipr_show_resource_path - Show the resource path or the resource address for
+ *			    this device.
  * @dev:	device struct
  * @buf:	buffer
  *
@@ -4097,9 +4106,14 @@
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
 	res = (struct ipr_resource_entry *)sdev->hostdata;
-	if (res)
+	if (res && ioa_cfg->sis64)
 		len = snprintf(buf, PAGE_SIZE, "%s\n",
-			       ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+			       ipr_format_res_path(res->res_path, buffer,
+						   sizeof(buffer)));
+	else if (res)
+		len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
+			       res->bus, res->target, res->lun);
+
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	return len;
 }
@@ -4351,7 +4365,8 @@
 			scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
 		if (ioa_cfg->sis64)
 			sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
-			            ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+				    ipr_format_res_path(res->res_path, buffer,
+							sizeof(buffer)));
 		return 0;
 	}
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 9ecd225..b965f358 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1684,8 +1684,9 @@
 	if (ipr_is_device(hostrcb)) {					\
 		if ((hostrcb)->ioa_cfg->sis64) {			\
 			printk(KERN_ERR IPR_NAME ": %s: " fmt, 		\
-				ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
-					&hostrcb->rp_buffer[0]),	\
+				ipr_format_res_path(hostrcb->hcam.u.error64.fd_res_path, \
+					hostrcb->rp_buffer,		\
+					sizeof(hostrcb->rp_buffer)),	\
 				__VA_ARGS__);				\
 		} else {						\
 			ipr_ra_err((hostrcb)->ioa_cfg,			\
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 01c012d..746a446 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -982,6 +982,18 @@
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
+#define PCI_DEVICE_ID_TITAN_200I	0x8028
+#define PCI_DEVICE_ID_TITAN_400I	0x8048
+#define PCI_DEVICE_ID_TITAN_800I	0x8088
+#define PCI_DEVICE_ID_TITAN_800EH	0xA007
+#define PCI_DEVICE_ID_TITAN_800EHB	0xA008
+#define PCI_DEVICE_ID_TITAN_400EH	0xA009
+#define PCI_DEVICE_ID_TITAN_100E	0xA010
+#define PCI_DEVICE_ID_TITAN_200E	0xA012
+#define PCI_DEVICE_ID_TITAN_400E	0xA013
+#define PCI_DEVICE_ID_TITAN_800E	0xA014
+#define PCI_DEVICE_ID_TITAN_200EI	0xA016
+#define PCI_DEVICE_ID_TITAN_200EISI	0xA017
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1541,6 +1553,10 @@
 	pbn_b3_4_115200,
 	pbn_b3_8_115200,
 
+	pbn_b4_bt_2_921600,
+	pbn_b4_bt_4_921600,
+	pbn_b4_bt_8_921600,
+
 	/*
 	 * Board-specific versions.
 	 */
@@ -1995,6 +2011,25 @@
 		.uart_offset	= 8,
 	},
 
+	[pbn_b4_bt_2_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_4_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 4,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[pbn_b4_bt_8_921600] = {
+		.flags		= FL_BASE4,
+		.num_ports	= 8,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+
 	/*
 	 * Entries following this are board-specific.
 	 */
@@ -3043,6 +3078,42 @@
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_2_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b4_bt_8_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_4_921600 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_1_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_4_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_8_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_4000000 },
 
 	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index bcee156..0f11896 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -89,15 +89,12 @@
 static unsigned int altera_uart_get_mctrl(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 	unsigned int sigs;
 
-	spin_lock_irqsave(&port->lock, flags);
 	sigs =
 	    (readl(port->membase + ALTERA_UART_STATUS_REG) &
 	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
 	sigs |= (pp->sigs & TIOCM_RTS);
-	spin_unlock_irqrestore(&port->lock, flags);
 
 	return sigs;
 }
@@ -105,49 +102,37 @@
 static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->sigs = sigs;
 	if (sigs & TIOCM_RTS)
 		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
 	else
 		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_start_tx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_stop_tx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_stop_rx(struct uart_port *port)
 {
 	struct altera_uart *pp = container_of(port, struct altera_uart, port);
-	unsigned long flags;
 
-	spin_lock_irqsave(&port->lock, flags);
 	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
 	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void altera_uart_break_ctl(struct uart_port *port, int break_state)
@@ -272,10 +257,14 @@
 	unsigned int isr;
 
 	isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+
+	spin_lock(&port->lock);
 	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
 		altera_uart_rx_chars(pp);
 	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
 		altera_uart_tx_chars(pp);
+	spin_unlock(&port->lock);
+
 	return IRQ_RETVAL(isr);
 }
 
@@ -402,31 +391,24 @@
 	return 0;
 }
 
-static void altera_uart_console_putc(struct console *co, const char c)
+static void altera_uart_console_putc(struct uart_port *port, const char c)
 {
-	struct uart_port *port = &(altera_uart_ports + co->index)->port;
-	int i;
+	while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
+	         ALTERA_UART_STATUS_TRDY_MSK))
+		cpu_relax();
 
-	for (i = 0; i < 0x10000; i++) {
-		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
-		    ALTERA_UART_STATUS_TRDY_MSK)
-			break;
-	}
 	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
-	for (i = 0; i < 0x10000; i++) {
-		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
-		    ALTERA_UART_STATUS_TRDY_MSK)
-			break;
-	}
 }
 
 static void altera_uart_console_write(struct console *co, const char *s,
 				      unsigned int count)
 {
+	struct uart_port *port = &(altera_uart_ports + co->index)->port;
+
 	for (; count; count--, s++) {
-		altera_uart_console_putc(co, *s);
+		altera_uart_console_putc(port, *s);
 		if (*s == '\n')
-			altera_uart_console_putc(co, '\r');
+			altera_uart_console_putc(port, '\r');
 	}
 }
 
@@ -516,7 +498,7 @@
 	return 0;
 }
 
-static int altera_uart_remove(struct platform_device *pdev)
+static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638..50441ff 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@
 	return 0;
 }
 
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
 	{
 		.id	= 0x00041010,
 		.mask	= 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb48..6ca7a44 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
 struct uart_amba_port {
 	struct uart_port	port;
 	struct clk		*clk;
-	unsigned int		im;	/* interrupt mask */
+	unsigned int		im;		/* interrupt mask */
 	unsigned int		old_status;
-	unsigned int		ifls;	/* vendor-specific */
+	unsigned int		ifls;		/* vendor-specific */
+	unsigned int		lcrh_tx;	/* vendor-specific */
+	unsigned int		lcrh_rx;	/* vendor-specific */
+	bool			oversampling;   /* vendor-specific */
 	bool			autorts;
 };
 
@@ -79,16 +82,25 @@
 struct vendor_data {
 	unsigned int		ifls;
 	unsigned int		fifosize;
+	unsigned int		lcrh_tx;
+	unsigned int		lcrh_rx;
+	bool			oversampling;
 };
 
 static struct vendor_data vendor_arm = {
 	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
 	.fifosize		= 16,
+	.lcrh_tx		= UART011_LCRH,
+	.lcrh_rx		= UART011_LCRH,
+	.oversampling		= false,
 };
 
 static struct vendor_data vendor_st = {
 	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
 	.fifosize		= 64,
+	.lcrh_tx		= ST_UART011_LCRH_TX,
+	.lcrh_rx		= ST_UART011_LCRH_RX,
+	.oversampling		= true,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@
 	unsigned int lcr_h;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	lcr_h = readw(uap->port.membase + UART011_LCRH);
+	lcr_h = readw(uap->port.membase + uap->lcrh_tx);
 	if (break_state == -1)
 		lcr_h |= UART01x_LCRH_BRK;
 	else
 		lcr_h &= ~UART01x_LCRH_BRK;
-	writew(lcr_h, uap->port.membase + UART011_LCRH);
+	writew(lcr_h, uap->port.membase + uap->lcrh_tx);
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
@@ -393,7 +405,17 @@
 	writew(cr, uap->port.membase + UART011_CR);
 	writew(0, uap->port.membase + UART011_FBRD);
 	writew(1, uap->port.membase + UART011_IBRD);
-	writew(0, uap->port.membase + UART011_LCRH);
+	writew(0, uap->port.membase + uap->lcrh_rx);
+	if (uap->lcrh_tx != uap->lcrh_rx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(0, uap->port.membase + uap->lcrh_tx);
+	}
 	writew(0, uap->port.membase + UART01x_DR);
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
 		barrier();
@@ -422,10 +444,19 @@
 	return retval;
 }
 
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+					unsigned int lcrh)
+{
+      unsigned long val;
+
+      val = readw(uap->port.membase + lcrh);
+      val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+      writew(val, uap->port.membase + lcrh);
+}
+
 static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
-	unsigned long val;
 
 	/*
 	 * disable all interrupts
@@ -450,9 +481,9 @@
 	/*
 	 * disable break condition and fifos
 	 */
-	val = readw(uap->port.membase + UART011_LCRH);
-	val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
-	writew(val, uap->port.membase + UART011_LCRH);
+	pl011_shutdown_channel(uap, uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx)
+		pl011_shutdown_channel(uap, uap->lcrh_tx);
 
 	/*
 	 * Shut down the clock producer
@@ -472,8 +503,13 @@
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = port->uartclk * 4 / baud;
+	baud = uart_get_baud_rate(port, termios, old, 0,
+				  port->uartclk/(uap->oversampling ? 8 : 16));
+
+	if (baud > port->uartclk/16)
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+	else
+		quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -552,6 +588,13 @@
 		uap->autorts = false;
 	}
 
+	if (uap->oversampling) {
+		if (baud > port->uartclk/16)
+			old_cr |= ST_UART011_CR_OVSFACT;
+		else
+			old_cr &= ~ST_UART011_CR_OVSFACT;
+	}
+
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@
 	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
 	 * ----------^----------^----------^----------^-----
 	 */
-	writew(lcr_h, port->membase + UART011_LCRH);
+	writew(lcr_h, port->membase + uap->lcrh_rx);
+	if (uap->lcrh_rx != uap->lcrh_tx) {
+		int i;
+		/*
+		 * Wait 10 PCLKs before writing LCRH_TX register,
+		 * to get this delay write read only register 10 times
+		 */
+		for (i = 0; i < 10; ++i)
+			writew(0xff, uap->port.membase + UART011_MIS);
+		writew(lcr_h, port->membase + uap->lcrh_tx);
+	}
 	writew(old_cr, port->membase + UART011_CR);
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@
 	if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
 		unsigned int lcr_h, ibrd, fbrd;
 
-		lcr_h = readw(uap->port.membase + UART011_LCRH);
+		lcr_h = readw(uap->port.membase + uap->lcrh_tx);
 
 		*parity = 'n';
 		if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@
 		fbrd = readw(uap->port.membase + UART011_FBRD);
 
 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+		if (uap->oversampling) {
+			if (readw(uap->port.membase + UART011_CR)
+				  & ST_UART011_CR_OVSFACT)
+				*baud *= 2;
+		}
 	}
 }
 
@@ -800,6 +859,9 @@
 	}
 
 	uap->ifls = vendor->ifls;
+	uap->lcrh_rx = vendor->lcrh_rx;
+	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->oversampling = vendor->oversampling;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
@@ -868,7 +930,7 @@
 }
 #endif
 
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d..a182def 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -41,6 +41,7 @@
 #include <linux/uaccess.h>
 
 #include <asm/io.h>
+#include <asm/ioctls.h>
 
 #include <asm/mach/serial_at91.h>
 #include <mach/board.h>
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 96f7e74..511cbf6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -797,7 +797,7 @@
 		gpio_free(uart->rts_pin);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (UART_GET_IER(uart) && EDSSI)
+	if (UART_GET_IER(uart) & EDSSI)
 		free_irq(uart->status_irq, uart);
 #endif
 }
@@ -869,7 +869,12 @@
 	}
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud) - ANOMALY_05000230;
+	quot = uart_get_divisor(port, baud);
+
+	/* If discipline is not IRDA, apply ANOMALY_05000230 */
+	if (termios->c_line != N_IRDA)
+		quot -= ANOMALY_05000230;
+
 	spin_lock_irqsave(&uart->port.lock, flags);
 
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 9eb62a2..cd6cf57 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@
 	}
 }
 
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+		const char *string, u_int count)
+{
+	unsigned int i;
+	cbd_t __iomem *bdp, *bdbase;
+	unsigned char *cpm_outp_addr;
+
+	/* Get the address of the host memory buffer.
+	 */
+	bdp = pinfo->tx_cur;
+	bdbase = pinfo->tx_bd_base;
+
+	/*
+	 * Now, do each character.  This is not as bad as it looks
+	 * since this is a holding FIFO and not a transmitting FIFO.
+	 * We could add the complexity of filling the entire transmit
+	 * buffer, but we would just wait longer between accesses......
+	 */
+	for (i = 0; i < count; i++, string++) {
+		/* Wait for transmitter fifo to empty.
+		 * Ready indicates output is ready, and xmt is doing
+		 * that, not that it is ready for us to send.
+		 */
+		while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+			;
+
+		/* Send the character out.
+		 * If the buffer address is in the CPM DPRAM, don't
+		 * convert it.
+		 */
+		cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+					pinfo);
+		*cpm_outp_addr = *string;
+
+		out_be16(&bdp->cbd_datlen, 1);
+		setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+			bdp = bdbase;
+		else
+			bdp++;
+
+		/* if a LF, also do CR... */
+		if (*string == 10) {
+			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+				;
+
+			cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+						pinfo);
+			*cpm_outp_addr = 13;
+
+			out_be16(&bdp->cbd_datlen, 1);
+			setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+			if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+				bdp = bdbase;
+			else
+				bdp++;
+		}
+	}
+
+	/*
+	 * Finally, Wait for transmitter & holding register to empty
+	 *  and restore the IER
+	 */
+	while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+		;
+
+	pinfo->tx_cur = bdp;
+}
+#endif
+
 #ifdef CONFIG_CONSOLE_POLL
 /* Serial polling routines for writing and reading from the uart while
  * in an interrupt or debug context.
@@ -999,7 +1076,7 @@
 	static char ch[2];
 
 	ch[0] = (char)c;
-	cpm_uart_early_write(pinfo->port.line, ch, 1);
+	cpm_uart_early_write(pinfo, ch, 1);
 }
 #endif /* CONFIG_CONSOLE_POLL */
 
@@ -1130,9 +1207,6 @@
 				   u_int count)
 {
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
-	unsigned int i;
-	cbd_t __iomem *bdp, *bdbase;
-	unsigned char *cp;
 	unsigned long flags;
 	int nolock = oops_in_progress;
 
@@ -1142,66 +1216,7 @@
 		spin_lock_irqsave(&pinfo->port.lock, flags);
 	}
 
-	/* Get the address of the host memory buffer.
-	 */
-	bdp = pinfo->tx_cur;
-	bdbase = pinfo->tx_bd_base;
-
-	/*
-	 * Now, do each character.  This is not as bad as it looks
-	 * since this is a holding FIFO and not a transmitting FIFO.
-	 * We could add the complexity of filling the entire transmit
-	 * buffer, but we would just wait longer between accesses......
-	 */
-	for (i = 0; i < count; i++, s++) {
-		/* Wait for transmitter fifo to empty.
-		 * Ready indicates output is ready, and xmt is doing
-		 * that, not that it is ready for us to send.
-		 */
-		while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-			;
-
-		/* Send the character out.
-		 * If the buffer address is in the CPM DPRAM, don't
-		 * convert it.
-		 */
-		cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-		*cp = *s;
-
-		out_be16(&bdp->cbd_datlen, 1);
-		setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-			bdp = bdbase;
-		else
-			bdp++;
-
-		/* if a LF, also do CR... */
-		if (*s == 10) {
-			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-				;
-
-			cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
-			*cp = 13;
-
-			out_be16(&bdp->cbd_datlen, 1);
-			setbits16(&bdp->cbd_sc, BD_SC_READY);
-
-			if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
-				bdp = bdbase;
-			else
-				bdp++;
-		}
-	}
-
-	/*
-	 * Finally, Wait for transmitter & holding register to empty
-	 *  and restore the IER
-	 */
-	while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
-		;
-
-	pinfo->tx_cur = bdp;
+	cpm_uart_early_write(pinfo, s, count);
 
 	if (unlikely(nolock)) {
 		local_irq_restore(flags);
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index ecdc0fa..f8c816e 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -41,19 +41,6 @@
 	unsigned int		imr;
 };
 
-#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
-
-static inline void msm_write(struct uart_port *port, unsigned int val,
-			     unsigned int off)
-{
-	__raw_writel(val, port->membase + off);
-}
-
-static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
-{
-	return __raw_readl(port->membase + off);
-}
-
 static void msm_stop_tx(struct uart_port *port)
 {
 	struct msm_port *msm_port = UART_TO_MSM(port);
@@ -320,11 +307,7 @@
 	struct msm_port *msm_port = UART_TO_MSM(port);
 
 	clk_enable(msm_port->clk);
-
-	msm_write(port, 0xC0, UART_MREG);
-	msm_write(port, 0xB2, UART_NREG);
-	msm_write(port, 0x7D, UART_DREG);
-	msm_write(port, 0x1C, UART_MNDREG);
+	msm_serial_set_mnd_regs(port);
 }
 
 static int msm_startup(struct uart_port *port)
@@ -706,6 +689,8 @@
 	if (unlikely(IS_ERR(msm_port->clk)))
 		return PTR_ERR(msm_port->clk);
 	port->uartclk = clk_get_rate(msm_port->clk);
+	printk(KERN_INFO "uartclk = %d\n", port->uartclk);
+
 
 	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!resource))
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
index 689f1fa..f6ca9ca 100644
--- a/drivers/serial/msm_serial.h
+++ b/drivers/serial/msm_serial.h
@@ -114,4 +114,60 @@
 #define UART_MISR	0x0010
 #define UART_ISR	0x0014
 
+#define UART_TO_MSM(uart_port)	((struct msm_port *) uart_port)
+
+static inline
+void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
+{
+	__raw_writel(val, port->membase + off);
+}
+
+static inline
+unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+	return __raw_readl(port->membase + off);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock.
+ */
+static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
+{
+	msm_write(port, 0x06, UART_MREG);
+	msm_write(port, 0xF1, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x1A, UART_MNDREG);
+}
+
+/*
+ * Setup the MND registers to use the TCXO clock divided by 4.
+ */
+static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
+{
+	msm_write(port, 0x18, UART_MREG);
+	msm_write(port, 0xF6, UART_NREG);
+	msm_write(port, 0x0F, UART_DREG);
+	msm_write(port, 0x0A, UART_MNDREG);
+}
+
+static inline
+void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port)
+{
+	if (port->uartclk == 19200000)
+		msm_serial_set_mnd_regs_tcxo(port);
+	else
+		msm_serial_set_mnd_regs_tcxoby4(port);
+}
+
+/*
+ * TROUT has a specific defect that makes it report it's uartclk
+ * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special
+ * cases TROUT to use the right clock.
+ */
+#ifdef CONFIG_MACH_TROUT
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4
+#else
+#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk
+#endif
+
 #endif	/* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index dadd686..ab17c08 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -715,6 +715,8 @@
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
@@ -724,8 +726,6 @@
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
-	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
-	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
 	PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
@@ -768,17 +768,26 @@
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
 	PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
+	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
 	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
+	PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
 	PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
+	PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
+	PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
+	PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
 	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
+	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
+	PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
 	PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
 	PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
 	PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
@@ -792,21 +801,27 @@
 	PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
 	PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
 	PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
 	PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
 	PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
+	PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
 	PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
 	PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
+	PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
+	PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
+	PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958b..544f2e2 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@
 
 	con->index = line;
 	drv->cons = con;
-	add_preferred_console(con->name, line, NULL);
+
+	if (!console_set_on_cmdline)
+		add_preferred_console(con->name, line, NULL);
 
 	return 1;
 }
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c..ffbf455 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@
 static int __devexit su_remove(struct of_device *op)
 {
 	struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+	bool kbdms = false;
 
 	if (up->su_type == SU_PORT_MS ||
-	    up->su_type == SU_PORT_KBD) {
+	    up->su_type == SU_PORT_KBD)
+		kbdms = true;
+
+	if (kbdms) {
 #ifdef CONFIG_SERIO
 		serio_unregister_port(&up->serio);
 #endif
-		kfree(up);
-	} else if (up->port.type != PORT_UNKNOWN) {
+	} else if (up->port.type != PORT_UNKNOWN)
 		uart_remove_one_port(&sunsu_reg, &up->port);
-	}
 
 	if (up->port.membase)
 		of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
 
+	if (kbdms)
+		kfree(up);
+
 	dev_set_drvdata(&op->dev, NULL);
 
 	return 0;
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index 0051959..ceba593 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -441,8 +441,10 @@
 
 	ret = sysfs_create_bin_file(tables_kobj,
 				  &tbl_attr->attr);
-	if (ret)
+	if (ret) {
 		kfree(tbl_attr);
+		tbl_attr = NULL;
+	}
 
 	sfi_unmap_table(th);
 	return tbl_attr;
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index c585574b..e91a23e 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -16,6 +16,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/module.h>
@@ -855,8 +857,8 @@
 		primary = 1;
 
 	if (!data[0] && !data[1])
-		pr_warning("intc: missing unique irq mask for "
-			   "irq %d (vect 0x%04x)\n", irq, irq2evt(irq));
+		pr_warning("missing unique irq mask for irq %d (vect 0x%04x)\n",
+			   irq, irq2evt(irq));
 
 	data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
 	data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
@@ -952,7 +954,7 @@
 	struct intc_desc_int *d;
 	struct resource *res;
 
-	pr_info("intc: Registered controller '%s' with %u IRQs\n",
+	pr_info("Registered controller '%s' with %u IRQs\n",
 		desc->name, hw->nr_vectors);
 
 	d = kzalloc(sizeof(*d), GFP_NOWAIT);
@@ -1148,7 +1150,7 @@
 	if (unlikely(!uimask))
 		return -ENOMEM;
 
-	pr_info("intc: userimask support registered for levels 0 -> %d\n",
+	pr_info("userimask support registered for levels 0 -> %d\n",
 		default_prio_level - 1);
 
 	return 0;
@@ -1286,7 +1288,7 @@
 	}
 
 	if (error)
-		pr_err("intc: sysdev registration error\n");
+		pr_err("sysdev registration error\n");
 
 	return error;
 }
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index ffa111a..97ab0a8 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -66,28 +66,6 @@
 	__be32 receive;
 };
 
-/* SPI Parameter RAM */
-struct spi_pram {
-	__be16	rbase;	/* Rx Buffer descriptor base address */
-	__be16	tbase;	/* Tx Buffer descriptor base address */
-	u8	rfcr;	/* Rx function code */
-	u8	tfcr;	/* Tx function code */
-	__be16	mrblr;	/* Max receive buffer length */
-	__be32	rstate;	/* Internal */
-	__be32	rdp;	/* Internal */
-	__be16	rbptr;	/* Internal */
-	__be16	rbc;	/* Internal */
-	__be32	rxtmp;	/* Internal */
-	__be32	tstate;	/* Internal */
-	__be32	tdp;	/* Internal */
-	__be16	tbptr;	/* Internal */
-	__be16	tbc;	/* Internal */
-	__be32	txtmp;	/* Internal */
-	__be32	res;	/* Tx temp. */
-	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
-	__be16	res1;	/* Reserved */
-};
-
 /* SPI Controller mode register definitions */
 #define	SPMODE_LOOP		(1 << 30)
 #define	SPMODE_CI_INACTIVEHIGH	(1 << 29)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b5c3b30..984a754 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -141,5 +141,11 @@
 
 source "drivers/staging/adis16255/Kconfig"
 
+source "drivers/staging/xgifb/Kconfig"
+
+source "drivers/staging/mrst-touchscreen/Kconfig"
+
+source "drivers/staging/msm/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e330dd5..9fa2513 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -51,3 +51,6 @@
 obj-$(CONFIG_CXT1E1)		+= cxt1e1/
 obj-$(CONFIG_TI_ST)		+= ti-st/
 obj-$(CONFIG_ADIS16255)		+= adis16255/
+obj-$(CONFIG_FB_XGI)		+= xgifb/
+obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH)	+= mrst-touchscreen/
+obj-$(CONFIG_MSM_STAGING)	+= msm/
diff --git a/drivers/staging/adis16255/Kconfig b/drivers/staging/adis16255/Kconfig
index a642be6..a883c1f 100644
--- a/drivers/staging/adis16255/Kconfig
+++ b/drivers/staging/adis16255/Kconfig
@@ -1,5 +1,5 @@
 config ADIS16255
-	tristate "Ananlog Devices ADIS16250/16255"
+	tristate "Analog Devices ADIS16250/16255"
 	depends on SPI && SYSFS
 	---help---
 	If you say yes here you get support for the Analog Devices
diff --git a/drivers/staging/adis16255/adis16255.c b/drivers/staging/adis16255/adis16255.c
index 1ba11f0..55d66e2 100644
--- a/drivers/staging/adis16255/adis16255.c
+++ b/drivers/staging/adis16255/adis16255.c
@@ -361,7 +361,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int spi_adis16255_probe(struct spi_device *spi)
+static int __devinit spi_adis16255_probe(struct spi_device *spi)
 {
 
 	struct adis16255_init_data *init_data = spi->dev.platform_data;
@@ -421,7 +421,7 @@
 	return status;
 }
 
-static int spi_adis16255_remove(struct spi_device *spi)
+static int __devexit spi_adis16255_remove(struct spi_device *spi)
 {
 	struct spi_adis16255_data  *spiadis    = dev_get_drvdata(&spi->dev);
 
diff --git a/drivers/staging/batman-adv/bat_sysfs.c b/drivers/staging/batman-adv/bat_sysfs.c
index e2c000b..212bc21 100644
--- a/drivers/staging/batman-adv/bat_sysfs.c
+++ b/drivers/staging/batman-adv/bat_sysfs.c
@@ -225,9 +225,9 @@
 	NULL,
 };
 
-static ssize_t transtable_local_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t transtable_local_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -235,9 +235,9 @@
 	return hna_local_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t transtable_global_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t transtable_global_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -245,9 +245,9 @@
 	return hna_global_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t originators_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buff, loff_t off, size_t count)
+static ssize_t originators_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
@@ -255,9 +255,9 @@
 	return orig_fill_buffer_text(net_dev, buff, count, off);
 }
 
-static ssize_t vis_data_read(struct kobject *kobj,
-			     struct bin_attribute *bin_attr,
-			     char *buff, loff_t off, size_t count)
+static ssize_t vis_data_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buff, loff_t off, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
diff --git a/drivers/staging/batman-adv/device.c b/drivers/staging/batman-adv/device.c
index ad82ec4..32204b5 100644
--- a/drivers/staging/batman-adv/device.c
+++ b/drivers/staging/batman-adv/device.c
@@ -196,7 +196,7 @@
 	kfree(device_packet);
 
 	if (error)
-		return error;
+		return -EFAULT;
 
 	return sizeof(struct icmp_packet);
 }
@@ -309,7 +309,7 @@
 	struct device_packet *device_packet;
 	unsigned long flags;
 
-	device_packet = kmalloc(sizeof(struct device_packet), GFP_KERNEL);
+	device_packet = kmalloc(sizeof(struct device_packet), GFP_ATOMIC);
 
 	if (!device_packet)
 		return;
diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c
index 9d13979..74c70d5 100644
--- a/drivers/staging/batman-adv/main.c
+++ b/drivers/staging/batman-adv/main.c
@@ -127,7 +127,10 @@
 	return 0;
 
 unreg_soft_device:
-	unregister_netdevice(soft_device);
+	unregister_netdev(soft_device);
+	soft_device = NULL;
+	return -ENOMEM;
+
 free_soft_device:
 	free_netdev(soft_device);
 	soft_device = NULL;
diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c
index d8536e2..ac69ed8 100644
--- a/drivers/staging/batman-adv/send.c
+++ b/drivers/staging/batman-adv/send.c
@@ -440,6 +440,9 @@
 	hlist_del(&forw_packet->list);
 	spin_unlock_irqrestore(&forw_bcast_list_lock, flags);
 
+	if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+		goto out;
+
 	/* rebroadcast packet */
 	rcu_read_lock();
 	list_for_each_entry_rcu(batman_if, &if_list, list) {
@@ -453,15 +456,15 @@
 
 	forw_packet->num_packets++;
 
-	/* if we still have some more bcasts to send and we are not shutting
-	 * down */
-	if ((forw_packet->num_packets < 3) &&
-	    (atomic_read(&module_state) != MODULE_DEACTIVATING))
+	/* if we still have some more bcasts to send */
+	if (forw_packet->num_packets < 3) {
 		_add_bcast_packet_to_list(forw_packet, ((5 * HZ) / 1000));
-	else {
-		forw_packet_free(forw_packet);
-		atomic_inc(&bcast_queue_left);
+		return;
 	}
+
+out:
+	forw_packet_free(forw_packet);
+	atomic_inc(&bcast_queue_left);
 }
 
 void send_outstanding_bat_packet(struct work_struct *work)
@@ -476,6 +479,9 @@
 	hlist_del(&forw_packet->list);
 	spin_unlock_irqrestore(&forw_bat_list_lock, flags);
 
+	if (atomic_read(&module_state) == MODULE_DEACTIVATING)
+		goto out;
+
 	send_packet(forw_packet);
 
 	/**
@@ -483,10 +489,10 @@
 	 * to determine the queues wake up time unless we are
 	 * shutting down
 	 */
-	if ((forw_packet->own) &&
-	    (atomic_read(&module_state) != MODULE_DEACTIVATING))
+	if (forw_packet->own)
 		schedule_own_packet(forw_packet->if_incoming);
 
+out:
 	/* don't count own packet */
 	if (!forw_packet->own)
 		atomic_inc(&batman_queue_left);
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 8ce307e..aad4732 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -100,15 +100,6 @@
 
 if COMEDI_ISA_DRIVERS && ISA
 
-config COMEDI_8255
-	tristate "Generic 8255 support"
-	default N
-	---help---
-	  Enable generic 8255 support.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 8255.
-
 config COMEDI_ACL7225B
 	tristate "ADlink NuDAQ ACL-7225b and compatibles support"
 	default N
@@ -130,6 +121,7 @@
 
 config COMEDI_PCL724
 	tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCL-724, PCL-722, PCL-731 and
@@ -198,6 +190,7 @@
 
 config COMEDI_PCM3724
 	tristate "Advantech PCM-3724 PC/104 card support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCM-3724 PC/104 cards.
@@ -232,18 +225,9 @@
 	  To compile this driver as a module, choose M here: the module will be
 	  called rti802.
 
-config COMEDI_DAS08
-	tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support"
-	default N
-	---help---
-	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
-	  and compatible ISA and PC/104 cards
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called das08.
-
 config COMEDI_DAS16M1
 	tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -254,6 +238,7 @@
 
 config COMEDI_DAS16
 	tristate "DAS-16 compatible ISA and PC/104 card support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -385,6 +370,7 @@
 
 config COMEDI_AIO_AIO12_8
 	tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -466,6 +452,7 @@
 config COMEDI_NI_ATMIO16D
 	tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
 	depends on ISAPNP && COMEDI_NI_COMMON
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
@@ -667,6 +654,7 @@
 
 config COMEDI_ADL_PCI6208
 	tristate "ADLink PCI-6208A support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ADLink PCI-6208A cards
@@ -751,6 +739,7 @@
 
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Advantech PCI DIO cards
@@ -762,6 +751,7 @@
 
 config COMEDI_AMPLC_DIO200
 	tristate "Amplicon PC272E and PCI272 DIO board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PC272E and PCI272 DIO boards
@@ -771,6 +761,7 @@
 
 config COMEDI_AMPLC_PC236
 	tristate "Amplicon PC36AT and PCI236 DIO board support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PC36AT and PCI236 DIO boards
@@ -799,6 +790,7 @@
 
 config COMEDI_AMPLC_PCI230
 	tristate "Amplicon PCI230 and PCI260 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -869,6 +861,7 @@
 
 config COMEDI_DAQBOARD2000
 	tristate "IOtech DAQboard/2000 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for the IOtech DAQboard/2000
@@ -896,6 +889,7 @@
 
 config COMEDI_CB_PCIDAS64
 	tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -907,6 +901,7 @@
 
 config COMEDI_CB_PCIDAS
 	tristate "MeasurementComputing PCI-DAS support"
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -920,6 +915,7 @@
 
 config COMEDI_CB_PCIDDA
 	tristate "MeasurementComputing PCI-DDA series support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DDA
@@ -931,6 +927,7 @@
 
 config COMEDI_CB_PCIDIO
 	tristate "MeasurementComputing PCI-DIO series support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
@@ -941,6 +938,7 @@
 
 config COMEDI_CB_PCIMDAS
 	tristate "MeasurementComputing PCIM-DAS1602/16 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -951,6 +949,7 @@
 
 config COMEDI_CB_PCIMDDA
 	tristate "MeasurementComputing PCIM-DDA06-16 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
@@ -1026,6 +1025,7 @@
 config COMEDI_NI_PCIDIO
 	tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
 	depends on COMEDI_MITE
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
@@ -1058,6 +1058,7 @@
 
 config COMEDI_RTD520
 	tristate "Real Time Devices PCI4520/DM7520 support"
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for Real Time Devices PCI4520/DM7520
@@ -1097,7 +1098,7 @@
 
 menuconfig COMEDI_PCMCIA_DRIVERS
 	tristate "Comedi PCMCIA drivers"
-	depends on COMEDI && PCMCIA && PCCARD
+	depends on COMEDI && (PCMCIA || PCCARD)
 	default N
 	---help---
 	  Enable comedi PCMCIA and PCCARD drivers to be built
@@ -1142,6 +1143,7 @@
 config COMEDI_NI_DAQ_DIO24_CS
 	tristate "NI DAQ-Card DIO-24 PCMCIA support"
 	depends on COMEDI_NI_COMMON
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1162,8 +1164,8 @@
 config COMEDI_NI_MIO_CS
 	tristate "NI DAQCard E series PCMCIA support"
 	depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
-	default N
 	select COMEDI_FC
+	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQCard E series
 	  DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
@@ -1265,7 +1267,8 @@
 
 config COMEDI_NI_TIO
 	tristate "NI general purpose counter support"
-	select COMEDI_MITE
+	depends on COMEDI_MITE
+	select COMEDI_8255
 	default N
 	---help---
 	  Enable support for National Instruments general purpose counters.
@@ -1278,6 +1281,8 @@
 
 config COMEDI_NI_LABPC
 	tristate "NI Lab-PC and compatibles ISA and PCI support"
+	depends on COMEDI_MITE
+	select COMEDI_8255
 	select COMEDI_FC
 	default N
 	---help---
@@ -1291,8 +1296,40 @@
 
 endif # COMEDI_NI_COMMON
 
+config COMEDI_8255
+	tristate "Generic 8255 support"
+	depends on COMEDI
+	default N
+	---help---
+	  Enable generic 8255 support.
+
+	  You should enable compilation this driver if you plan to use a board
+	  that has an 8255 chip. For multifunction boards, the main driver will
+	  configure the 8255 subdevice automatically.
+
+	  Note that most PCI 8255 boards do NOT work with this driver, and
+	  need a separate driver as a wrapper.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 8255.
+
+config COMEDI_DAS08
+	tristate "DAS-08 compatible support"
+	depends on COMEDI
+	select COMEDI_8255
+	default N
+	---help---
+	  Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
+
+	  Note that PCMCIA DAS08 cards are not directly supported by this
+	  driver, and need a separate driver as a wrapper.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_FC
 	tristate "Comedi shared functions for low-level driver support"
+	depends on COMEDI
 	default N
 	---help---
 	  Enable support for shared functions for low-level drivers.
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index aced00e..aeb2c00 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -83,7 +83,7 @@
 static int do_chaninfo_ioctl(struct comedi_device *dev,
 			     struct comedi_chaninfo __user *arg);
 static int do_bufinfo_ioctl(struct comedi_device *dev,
-			    struct comedi_bufinfo __user *arg);
+			    struct comedi_bufinfo __user *arg, void *file);
 static int do_cmd_ioctl(struct comedi_device *dev,
 			struct comedi_cmd __user *arg, void *file);
 static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg,
@@ -169,7 +169,8 @@
 		break;
 	case COMEDI_BUFINFO:
 		rc = do_bufinfo_ioctl(dev,
-				      (struct comedi_bufinfo __user *)arg);
+				      (struct comedi_bufinfo __user *)arg,
+				      file);
 		break;
 	case COMEDI_LOCK:
 		rc = do_lock_ioctl(dev, arg, file);
@@ -563,7 +564,7 @@
 
   */
 static int do_bufinfo_ioctl(struct comedi_device *dev,
-			    struct comedi_bufinfo __user *arg)
+			    struct comedi_bufinfo __user *arg, void *file)
 {
 	struct comedi_bufinfo bi;
 	struct comedi_subdevice *s;
@@ -576,6 +577,10 @@
 		return -EINVAL;
 
 	s = dev->subdevices + bi.subdevice;
+
+	if (s->lock && s->lock != file)
+		return -EACCES;
+
 	async = s->async;
 
 	if (!async) {
@@ -584,8 +589,17 @@
 		bi.buf_read_ptr = 0;
 		bi.buf_write_count = 0;
 		bi.buf_read_count = 0;
+		bi.bytes_read = 0;
+		bi.bytes_written = 0;
 		goto copyback;
 	}
+	if (!s->busy) {
+		bi.bytes_read = 0;
+		bi.bytes_written = 0;
+		goto copyback_position;
+	}
+	if (s->busy != file)
+		return -EACCES;
 
 	if (bi.bytes_read && (s->subdev_flags & SDF_CMD_READ)) {
 		bi.bytes_read = comedi_buf_read_alloc(async, bi.bytes_read);
@@ -604,6 +618,7 @@
 		comedi_buf_write_free(async, bi.bytes_written);
 	}
 
+copyback_position:
 	bi.buf_write_count = async->buf_write_count;
 	bi.buf_write_ptr = async->buf_write_ptr;
 	bi.buf_read_count = async->buf_read_count;
@@ -1576,6 +1591,19 @@
 	while (nbytes > 0 && !retval) {
 		set_current_state(TASK_INTERRUPTIBLE);
 
+		if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
+			if (count == 0) {
+				if (comedi_get_subdevice_runflags(s) &
+					SRF_ERROR) {
+					retval = -EPIPE;
+				} else {
+					retval = 0;
+				}
+				do_become_nonbusy(dev, s);
+			}
+			break;
+		}
+
 		n = nbytes;
 
 		m = n;
@@ -1588,16 +1616,6 @@
 			n = m;
 
 		if (n == 0) {
-			if (!(comedi_get_subdevice_runflags(s) & SRF_RUNNING)) {
-				if (comedi_get_subdevice_runflags(s) &
-				    SRF_ERROR) {
-					retval = -EPIPE;
-				} else {
-					retval = 0;
-				}
-				do_become_nonbusy(dev, s);
-				break;
-			}
 			if (file->f_flags & O_NONBLOCK) {
 				retval = -EAGAIN;
 				break;
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 5ccf246..354fb7d 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -12,7 +12,6 @@
 obj-$(CONFIG_COMEDI_SKEL)		+= skel.o
 
 # Comedi ISA drivers
-obj-$(CONFIG_COMEDI_8255)		+= 8255.o
 obj-$(CONFIG_COMEDI_ACL7225B)		+= acl7225b.o
 obj-$(CONFIG_COMEDI_PCL711)		+= pcl711.o
 obj-$(CONFIG_COMEDI_PCL724)		+= pcl724.o
@@ -26,7 +25,6 @@
 obj-$(CONFIG_COMEDI_PCM3730)		+= pcm3730.o
 obj-$(CONFIG_COMEDI_RTI800)		+= rti800.o
 obj-$(CONFIG_COMEDI_RTI802)		+= rti802.o
-obj-$(CONFIG_COMEDI_DAS08)		+= das08.o
 obj-$(CONFIG_COMEDI_DAS16M1)		+= das16m1.o
 obj-$(CONFIG_COMEDI_DAS16)		+= das16.o
 obj-$(CONFIG_COMEDI_DAS800)		+= das800.o
@@ -135,4 +133,6 @@
 obj-$(CONFIG_COMEDI_NI_TIO)		+= ni_tiocmd.o
 obj-$(CONFIG_COMEDI_NI_LABPC)		+= ni_labpc.o
 
+obj-$(CONFIG_COMEDI_8255)		+= 8255.o
+obj-$(CONFIG_COMEDI_DAS08)		+= das08.o
 obj-$(CONFIG_COMEDI_FC)			+= comedi_fc.o
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 2c98641..b18e81d 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -68,6 +68,10 @@
 #include "addi_common.h"
 #include "addi_amcc_s5933.h"
 
+#ifndef ADDIDATA_DRIVER_NAME
+#define ADDIDATA_DRIVER_NAME	"addi_common"
+#endif
+
 /* Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH <info@addi-data.com>"); */
 /* Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); */
 /* Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); */
@@ -2528,7 +2532,7 @@
 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
 
 static struct comedi_driver driver_addi = {
-	.driver_name = "addi_common",
+	.driver_name = ADDIDATA_DRIVER_NAME,
 	.module = THIS_MODULE,
 	.attach = i_ADDI_Attach,
 	.detach = i_ADDI_Detach,
@@ -2570,10 +2574,6 @@
 	struct pcilst_struct *card = NULL;
 	unsigned char pci_bus, pci_slot, pci_func;
 	int i_Dma = 0;
-	static char c_Identifier[150];
-
-	sprintf(c_Identifier, "Addi-Data GmbH Comedi %s",
-		this_board->pc_DriverName);
 
 	ret = alloc_private(dev, sizeof(struct addi_private));
 	if (ret < 0)
@@ -2583,7 +2583,7 @@
 		v_pci_card_list_init(this_board->i_VendorId, 1);	/* 1 for displaying the list.. */
 		pci_list_builded = 1;
 	}
-	/* printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); */
+	/* printk("comedi%d: "ADDIDATA_DRIVER_NAME": board=%s",dev->minor,this_board->pc_DriverName); */
 
 	if ((this_board->i_Dma) && (it->options[2] == 0)) {
 		i_Dma = 1;
@@ -2648,7 +2648,7 @@
 
 	if (irq > 0) {
 		if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
-				c_Identifier, dev) < 0) {
+				this_board->pc_DriverName, dev) < 0) {
 			printk(", unable to allocate IRQ %u, DISABLING IT",
 				irq);
 			irq = 0;	/* Can't use IRQ */
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index da454e8..6dfcbe8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -2,4 +2,6 @@
 
 #define ADDIDATA_WATCHDOG 2	/*  Or shold it be something else */
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_035"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index fa2056e..4722ec8 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1032 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1032"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index 7a5cae5..db3dafd 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1500 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1500"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index 8d414844..f591baf 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1516 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1516"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 0351cdd..6f5c923 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1564 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1564"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 5067990..1d926ad 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_16XX 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_16xx"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c
index c433445..df6ba8c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1710.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1710.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_1710 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_1710"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2016.c b/drivers/staging/comedi/drivers/addi_apci_2016.c
index 271c47c..7266e41 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2016.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2016.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2016 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2016"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index 5108ea2..f67da94 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2032 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2032"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index e439f83..bc7f7d6 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_2200 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_2200"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3001.c b/drivers/staging/comedi/drivers/addi_apci_3001.c
index df97c305..d86c420 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3001.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3001.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3001 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3001"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index 9183125..0b22cf1 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3120 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3120"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3200.c b/drivers/staging/comedi/drivers/addi_apci_3200.c
index f25a70b..1593139 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3200.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3200 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3200"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3300.c b/drivers/staging/comedi/drivers/addi_apci_3300.c
index 1ee4778..733c69a 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3300.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3300.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3300 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3300"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index 1049e20..d8a01b1 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3501 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3501"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index fb9deb70..942bc9e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -1,3 +1,5 @@
 #define CONFIG_APCI_3XXX 1
 
+#define ADDIDATA_DRIVER_NAME	"addi_apci_3xxx"
+
 #include "addi-data/addi_common.c"
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 36a254c..39d112b 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -824,9 +824,12 @@
 		plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
 					  false, true, true);
 
-		dev_private->scan_delay =
-		    (async_cmd->scan_begin_arg / (async_cmd->convert_arg *
-						  async_cmd->chanlist_len)) - 1;
+		if (async_cmd->scan_begin_src == TRIG_TIMER) {
+			dev_private->scan_delay =
+				(async_cmd->scan_begin_arg /
+				 (async_cmd->convert_arg *
+				  async_cmd->chanlist_len)) - 1;
+		}
 
 		break;
 
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 40eeecf..e424a0c 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -7,17 +7,17 @@
 */
 /*
 Driver: adv_pci_dio
-Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1736UP,
-             PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754,
-             PCI-1756, PCI-1762
+Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1735U,
+             PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E,
+             PCI-1754, PCI-1756, PCI-1762
 Author: Michal Dobes <dobes@tesnet.cz>
 Devices: [Advantech] PCI-1730 (adv_pci_dio), PCI-1733,
-  PCI-1734, PCI-1736UP, PCI-1750,
+  PCI-1734, PCI-1735U, PCI-1736UP, PCI-1750,
   PCI-1751, PCI-1752, PCI-1753,
   PCI-1753+PCI-1753E, PCI-1754, PCI-1756,
   PCI-1760, PCI-1762
 Status: untested
-Updated: Mon, 14 Apr 2008 10:43:08 +0100
+Updated: Tue, 04 May 2010 13:00:00 +0000
 
 This driver supports now only insn interface for DI/DO/DIO.
 
@@ -35,6 +35,7 @@
 
 #include "comedi_pci.h"
 #include "8255.h"
+#include "8253.h"
 
 #undef PCI_DIO_EXTDEBUG		/* if defined, enable extensive debug logging */
 
@@ -49,7 +50,7 @@
 
 /* hardware types of the cards */
 enum hw_cards_id {
-	TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1736,
+	TYPE_PCI1730, TYPE_PCI1733, TYPE_PCI1734, TYPE_PCI1735, TYPE_PCI1736,
 	TYPE_PCI1750,
 	TYPE_PCI1751,
 	TYPE_PCI1752,
@@ -67,7 +68,10 @@
 #define MAX_DI_SUBDEVS	2	/* max number of DI subdevices per card */
 #define MAX_DO_SUBDEVS	2	/* max number of DO subdevices per card */
 #define MAX_DIO_SUBDEVG	2	/* max number of DIO subdevices group per card */
+#define MAX_8254_SUBDEVS   1	/* max number of 8254 counter subdevs per card */
+				/* (could be more than one 8254 per subdevice) */
 
+#define SIZE_8254	   4	/* 8254 IO space length */
 #define SIZE_8255	   4	/* 8255 IO space length */
 
 #define PCIDIO_MAINREG	   2	/* main I/O region for all Advantech cards? */
@@ -85,6 +89,12 @@
 #define PCI1734_IDO	   0	/* W:   Isolated digital output 0-31 */
 #define PCI173x_BOARDID	   4	/* R:   Board I/D switch for 1730/3/4 */
 
+/* Advantech PCI-1735U */
+#define PCI1735_DI	   0	/* R:   Digital input  0-31 */
+#define PCI1735_DO	   0	/* W:   Digital output 0-31 */
+#define PCI1735_C8254	   4	/* R/W: 8254 counter */
+#define PCI1735_BOARDID	   8    /* R:   Board I/D switch for 1735U */
+
 /*  Advantech PCI-1736UP */
 #define PCI1736_IDI        0	/* R:   Isolated digital input  0-15 */
 #define PCI1736_IDO        0	/* W:   Isolated digital output 0-15 */
@@ -192,7 +202,8 @@
 struct diosubd_data {
 	int chans;		/*  num of chans */
 	int addr;		/*  PCI address ofset */
-	int regs;		/*  number of registers to read or 8255 subdevices */
+	int regs;		/*  number of registers to read or 8255
+				    subdevices or 8254 chips */
 	unsigned int specflags;	/*  addon subdevice flags */
 };
 
@@ -206,6 +217,7 @@
 	struct diosubd_data sdo[MAX_DO_SUBDEVS];	/*  DO chans */
 	struct diosubd_data sdio[MAX_DIO_SUBDEVG];	/*  DIO 8255 chans */
 	struct diosubd_data boardid;	/*  card supports board ID switch */
+	struct diosubd_data s8254[MAX_8254_SUBDEVS];	/* 8254 subdevices */
 	enum hw_io_access io_access;
 };
 
@@ -214,6 +226,7 @@
 	PCI_VENDOR_ID_ADVANTECH, 0x1730, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1733, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1734, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+	PCI_VENDOR_ID_ADVANTECH, 0x1735, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
 	PCI_VENDOR_ID_ADVANTECH, 0x1751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
@@ -235,14 +248,15 @@
 	 {{16, PCI1730_DO, 2, 0}, {16, PCI1730_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
-	 IO_8b,
-	 },
+	 {{0, 0, 0, 0}},
+	 IO_8b},
 	{"pci1733", PCI_VENDOR_ID_ADVANTECH, 0x1733, PCIDIO_MAINREG,
 	 TYPE_PCI1733,
 	 {{0, 0, 0, 0}, {32, PCI1733_IDI, 4, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1734", PCI_VENDOR_ID_ADVANTECH, 0x1734, PCIDIO_MAINREG,
 	 TYPE_PCI1734,
@@ -250,6 +264,15 @@
 	 {{0, 0, 0, 0}, {32, PCI1734_IDO, 4, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
+	 IO_8b},
+	{"pci1735", PCI_VENDOR_ID_ADVANTECH, 0x1735, PCIDIO_MAINREG,
+	 TYPE_PCI1735,
+	 {{32, PCI1735_DI, 4, 0}, {0, 0, 0, 0}},
+	 {{32, PCI1735_DO, 4, 0}, {0, 0, 0, 0}},
+	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { 4, PCI1735_BOARDID, 1, SDF_INTERNAL},
+	 {{3, PCI1735_C8254, 1, 0}},
 	 IO_8b},
 	{"pci1736", PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI1736_MAINREG,
 	 TYPE_PCI1736,
@@ -257,14 +280,15 @@
 	 {{0, 0, 0, 0}, {16, PCI1736_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI1736_BOARDID, 1, SDF_INTERNAL},
-	 IO_8b,
-	 },
+	 {{0, 0, 0, 0}},
+	 IO_8b},
 	{"pci1750", PCI_VENDOR_ID_ADVANTECH, 0x1750, PCIDIO_MAINREG,
 	 TYPE_PCI1750,
 	 {{0, 0, 0, 0}, {16, PCI1750_IDI, 2, 0}},
 	 {{0, 0, 0, 0}, {16, PCI1750_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1751", PCI_VENDOR_ID_ADVANTECH, 0x1751, PCIDIO_MAINREG,
 	 TYPE_PCI1751,
@@ -272,6 +296,7 @@
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{48, PCI1751_DIO, 2, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1752", PCI_VENDOR_ID_ADVANTECH, 0x1752, PCIDIO_MAINREG,
 	 TYPE_PCI1752,
@@ -279,6 +304,7 @@
 	 {{32, PCI1752_IDO, 2, 0}, {32, PCI1752_IDO2, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1753", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753,
@@ -286,6 +312,7 @@
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{96, PCI1753_DIO, 4, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1753e", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753E,
@@ -293,6 +320,7 @@
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{96, PCI1753_DIO, 4, 0}, {96, PCI1753E_DIO, 4, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1754", PCI_VENDOR_ID_ADVANTECH, 0x1754, PCIDIO_MAINREG,
 	 TYPE_PCI1754,
@@ -300,6 +328,7 @@
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1756", PCI_VENDOR_ID_ADVANTECH, 0x1756, PCIDIO_MAINREG,
 	 TYPE_PCI1756,
@@ -307,6 +336,7 @@
 	 {{0, 0, 0, 0}, {32, PCI1756_IDO, 2, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b},
 	{"pci1760", PCI_VENDOR_ID_ADVANTECH, 0x1760, 0,
 	 TYPE_PCI1760,
@@ -314,6 +344,7 @@
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {0, 0, 0, 0},
+	 {{0, 0, 0, 0}},
 	 IO_8b},
 	{"pci1762", PCI_VENDOR_ID_ADVANTECH, 0x1762, PCIDIO_MAINREG,
 	 TYPE_PCI1762,
@@ -321,6 +352,7 @@
 	 {{0, 0, 0, 0}, {16, PCI1762_RO, 1, 0}},
 	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
 	 {4, PCI1762_BOARDID, 1, SDF_INTERNAL},
+	 {{0, 0, 0, 0}},
 	 IO_16b}
 };
 
@@ -440,6 +472,83 @@
 /*
 ==============================================================================
 */
+static int pci_8254_insn_read(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	spin_lock_irqsave(&s->spin_lock, flags);
+	data[0] = i8254_read(dev->iobase + d->addr + (SIZE_8254 * chip),
+			0, chipchan);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_write(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	spin_lock_irqsave(&s->spin_lock, flags);
+	i8254_write(dev->iobase + d->addr + (SIZE_8254 * chip),
+			0, chipchan, data[0]);
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return 1;
+}
+
+/*
+==============================================================================
+*/
+static int pci_8254_insn_config(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn, unsigned int *data)
+{
+	const struct diosubd_data *d = (const struct diosubd_data *)s->private;
+	unsigned int chan, chip, chipchan;
+	unsigned long iobase;
+	int ret = 0;
+	unsigned long flags;
+
+	chan = CR_CHAN(insn->chanspec);	/* channel on subdevice */
+	chip = chan / 3;		/* chip on subdevice */
+	chipchan = chan - (3 * chip);	/* channel on chip on subdevice */
+	iobase = dev->iobase + d->addr + (SIZE_8254 * chip);
+	spin_lock_irqsave(&s->spin_lock, flags);
+	switch (data[0]) {
+	case INSN_CONFIG_SET_COUNTER_MODE:
+		ret = i8254_set_mode(iobase, 0, chipchan, data[1]);
+		if (ret < 0)
+			ret = -EINVAL;
+		break;
+	case INSN_CONFIG_8254_READ_STATUS:
+		data[1] = i8254_status(iobase, 0, chipchan);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	return ret < 0 ? ret : insn->n;
+}
+
+/*
+==============================================================================
+*/
 static int pci1760_unchecked_mbxrequest(struct comedi_device *dev,
 					unsigned char *omb, unsigned char *imb,
 					int repeats)
@@ -708,6 +817,15 @@
 		outb(0, dev->iobase + PCI1734_IDO + 2);
 		outb(0, dev->iobase + PCI1734_IDO + 3);
 		break;
+	case TYPE_PCI1735:
+		outb(0, dev->iobase + PCI1735_DO);	/*  clear outputs */
+		outb(0, dev->iobase + PCI1735_DO + 1);
+		outb(0, dev->iobase + PCI1735_DO + 2);
+		outb(0, dev->iobase + PCI1735_DO + 3);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 0, I8254_MODE0);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 1, I8254_MODE0);
+		i8254_set_mode(dev->iobase + PCI1735_C8254, 0, 2, I8254_MODE0);
+		break;
 
 	case TYPE_PCI1736:
 		outb(0, dev->iobase + PCI1736_IDO);
@@ -877,6 +995,26 @@
 /*
 ==============================================================================
 */
+static int pci_dio_add_8254(struct comedi_device *dev,
+			    struct comedi_subdevice * s,
+			    const struct diosubd_data *d, int subdev)
+{
+	s->type = COMEDI_SUBD_COUNTER;
+	s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+	s->n_chan = d->chans;
+	s->maxdata = 65535;
+	s->len_chanlist = d->chans;
+	s->insn_read = pci_8254_insn_read;
+	s->insn_write = pci_8254_insn_write;
+	s->insn_config = pci_8254_insn_config;
+	s->private = (void *)d;
+
+	return 0;
+}
+
+/*
+==============================================================================
+*/
 static int CheckAndAllocCard(struct comedi_device *dev,
 			     struct comedi_devconfig *it,
 			     struct pci_dev *pcidev)
@@ -979,6 +1117,9 @@
 			n_subdevices += this_board->sdio[i].regs;
 		if (this_board->boardid.chans)
 			n_subdevices++;
+		for (i = 0; i < MAX_8254_SUBDEVS; i++)
+			if (this_board->s8254[i].chans)
+				n_subdevices++;
 	}
 
 	ret = alloc_subdevices(dev, n_subdevices);
@@ -1022,6 +1163,13 @@
 		subdev++;
 	}
 
+	for (i = 0; i < MAX_8254_SUBDEVS; i++)
+		if (this_board->s8254[i].chans) {
+			s = dev->subdevices + subdev;
+			pci_dio_add_8254(dev, s, &this_board->s8254[i], subdev);
+			subdev++;
+		}
+
 	if (this_board->cardtype == TYPE_PCI1760)
 		pci1760_attach(dev, it);
 
@@ -1067,6 +1215,16 @@
 			}
 		}
 
+		if (this_board->boardid.chans) {
+			subdev++;
+		}
+
+		for (i = 0; i < MAX_8254_SUBDEVS; i++) {
+			if (this_board->s8254[i].chans) {
+				subdev++;
+			}
+		}
+
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = dev->subdevices + i;
 			s->private = NULL;
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 8eb6765..bf27617 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -460,6 +460,7 @@
 	int has_clk_gat_sce;
 	unsigned clock_src[3];	/* Current clock sources */
 	unsigned gate_src[3];	/* Current gate sources */
+	spinlock_t spinlock;
 };
 
 struct dio200_subdev_intr {
@@ -1042,8 +1043,11 @@
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	data[0] = i8254_read(subpriv->iobase, 0, chan);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	return 1;
 }
@@ -1057,8 +1061,11 @@
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	i8254_write(subpriv->iobase, 0, chan, data[0]);
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
 
 	return 1;
 }
@@ -1151,14 +1158,16 @@
 			  struct comedi_insn *insn, unsigned int *data)
 {
 	struct dio200_subdev_8254 *subpriv = s->private;
-	int ret;
+	int ret = 0;
 	int chan = CR_CHAN(insn->chanspec);
+	unsigned long flags;
 
+	spin_lock_irqsave(&subpriv->spinlock, flags);
 	switch (data[0]) {
 	case INSN_CONFIG_SET_COUNTER_MODE:
 		ret = i8254_set_mode(subpriv->iobase, 0, chan, data[1]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_8254_READ_STATUS:
 		data[1] = i8254_status(subpriv->iobase, 0, chan);
@@ -1166,30 +1175,35 @@
 	case INSN_CONFIG_SET_GATE_SRC:
 		ret = dio200_set_gate_src(subpriv, chan, data[2]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_GET_GATE_SRC:
 		ret = dio200_get_gate_src(subpriv, chan);
-		if (ret < 0)
-			return -EINVAL;
+		if (ret < 0) {
+			ret = -EINVAL;
+			break;
+		}
 		data[2] = ret;
 		break;
 	case INSN_CONFIG_SET_CLOCK_SRC:
 		ret = dio200_set_clock_src(subpriv, chan, data[1]);
 		if (ret < 0)
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	case INSN_CONFIG_GET_CLOCK_SRC:
 		ret = dio200_get_clock_src(subpriv, chan, &data[2]);
-		if (ret < 0)
-			return -EINVAL;
+		if (ret < 0) {
+			ret = -EINVAL;
+			break;
+		}
 		data[1] = ret;
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 		break;
 	}
-	return insn->n;
+	spin_unlock_irqrestore(&subpriv->spinlock, flags);
+	return ret < 0 ? ret : insn->n;
 }
 
 /*
@@ -1222,6 +1236,7 @@
 	s->insn_write = dio200_subdev_8254_write;
 	s->insn_config = dio200_subdev_8254_config;
 
+	spin_lock_init(&subpriv->spinlock);
 	subpriv->iobase = offset + iobase;
 	subpriv->has_clk_gat_sce = has_clk_gat_sce;
 	if (has_clk_gat_sce) {
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index 81829d6..c374bee 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -52,7 +52,6 @@
 #include "8255.h"
 
 #define PCI_VENDOR_ID_CB	0x1307	/*  PCI vendor number of ComputerBoards */
-#define N_BOARDS	10	/*  Number of boards in cb_pcidda_boards */
 #define EEPROM_SIZE	128	/*  number of entries in eeprom */
 #define MAX_AO_CHANNELS 8	/*  maximum number of ao channels for supported boards */
 
@@ -307,7 +306,7 @@
 					continue;
 				}
 			}
-			for (index = 0; index < N_BOARDS; index++) {
+			for (index = 0; index < ARRAY_SIZE(cb_pcidda_boards); index++) {
 				if (cb_pcidda_boards[index].device_id ==
 				    pcidev->device) {
 					goto found;
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index cedb02d..3a46f0c 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -123,7 +123,7 @@
 	 .adbits = 12,
 	 .ai_fifo_depth = 1024,
 	 .alwaysdither = 0,
-	 .gainlkup = ai_gain_16,
+	 .gainlkup = ai_gain_4,
 	 .ai_speed = 5000,
 	 .n_aochan = 2,
 	 .aobits = 12,
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 86f035d..27b4cb2 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -351,8 +351,7 @@
 	int ret = 0;
 
 	if (!this_usbduxsub) {
-		dev_err(&this_usbduxsub->interface->dev,
-			"comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
+		pr_err("comedi?: usbdux_ai_stop: this_usbduxsub=NULL!\n");
 		return -EFAULT;
 	}
 	dev_dbg(&this_usbduxsub->interface->dev, "comedi: usbdux_ai_stop\n");
diff --git a/drivers/staging/dt3155/allocator.c b/drivers/staging/dt3155/allocator.c
index bd5adbc..d33947b 100644
--- a/drivers/staging/dt3155/allocator.c
+++ b/drivers/staging/dt3155/allocator.c
@@ -176,9 +176,7 @@
 	prev = ptr; ptr = ptr->next;
 
 	if (!ptr) {
-		printk(KERN_ERR ALL_MSG
-			"free_dma(0x%08lx) but add. not allocated\n",
-			ptr->address);
+		pr_err(ALL_MSG "free_dma but add. not allocated\n");
 		return -EINVAL;
 	}
 	PDEBUGG("freeing: %08lx (%li) next %08lx\n", ptr->address, ptr->size,
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index 3f53b4d..12db555 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/completion.h>
 #include "osd.h"
 #include "logging.h"
 #include "vmbus_private.h"
@@ -293,6 +294,25 @@
 			      Channel);
 }
 
+
+DECLARE_COMPLETION(hv_channel_ready);
+
+/*
+ * Count initialized channels, and ensure all channels are ready when hv_vmbus
+ * module loading completes.
+ */
+static void count_hv_channel(void)
+{
+	static int counter;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gVmbusConnection.channel_lock, flags);
+	if (++counter == MAX_MSG_TYPES)
+		complete(&hv_channel_ready);
+	spin_unlock_irqrestore(&gVmbusConnection.channel_lock, flags);
+}
+
+
 /*
  * VmbusChannelProcessOffer - Process the offer by creating a channel/device
  * associated with this offer
@@ -373,22 +393,21 @@
 		 * can cleanup properly
 		 */
 		newChannel->State = CHANNEL_OPEN_STATE;
-		cnt = 0;
 
-		while (cnt != MAX_MSG_TYPES) {
+		/* Open IC channels */
+		for (cnt = 0; cnt < MAX_MSG_TYPES; cnt++) {
 			if (memcmp(&newChannel->OfferMsg.Offer.InterfaceType,
 				   &hv_cb_utils[cnt].data,
-				   sizeof(struct hv_guid)) == 0) {
+				   sizeof(struct hv_guid)) == 0 &&
+				VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
+						 2 * PAGE_SIZE, NULL, 0,
+						 hv_cb_utils[cnt].callback,
+						 newChannel) == 0) {
+				hv_cb_utils[cnt].channel = newChannel;
 				DPRINT_INFO(VMBUS, "%s",
-					    hv_cb_utils[cnt].log_msg);
-
-				if (VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
-						    2 * PAGE_SIZE, NULL, 0,
-						    hv_cb_utils[cnt].callback,
-						    newChannel) == 0)
-					hv_cb_utils[cnt].channel = newChannel;
+						hv_cb_utils[cnt].log_msg);
+				count_hv_channel();
 			}
-			cnt++;
 		}
 	}
 	DPRINT_EXIT(VMBUS);
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 8a49aaf..2adc9b4 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -24,6 +24,8 @@
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/reboot.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
 
 #include "logging.h"
 #include "osd.h"
@@ -251,10 +253,36 @@
 	DPRINT_EXIT(VMBUS);
 }
 
+static const struct pci_device_id __initconst
+hv_utils_pci_table[] __maybe_unused = {
+	{ PCI_DEVICE(0x1414, 0x5353) }, /* Hyper-V emulated VGA controller */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_utils_pci_table);
+
+
+static const struct dmi_system_id __initconst
+hv_utils_dmi_table[] __maybe_unused  = {
+	{
+		.ident = "Hyper-V",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+			DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+		},
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(dmi, hv_utils_dmi_table);
+
+
 static int __init init_hyperv_utils(void)
 {
 	printk(KERN_INFO "Registering HyperV Utility Driver\n");
 
+	if (!dmi_check_system(hv_utils_dmi_table))
+		return -ENODEV;
+
 	hv_cb_utils[HV_SHUTDOWN_MSG].channel->OnChannelCallback =
 		&shutdown_onchannelcallback;
 	hv_cb_utils[HV_SHUTDOWN_MSG].callback = &shutdown_onchannelcallback;
diff --git a/drivers/staging/hv/vmbus.h b/drivers/staging/hv/vmbus.h
index 0c6ee0f..3c14b29 100644
--- a/drivers/staging/hv/vmbus.h
+++ b/drivers/staging/hv/vmbus.h
@@ -74,4 +74,6 @@
 void vmbus_child_driver_unregister(struct driver_context *driver_ctx);
 void vmbus_get_interface(struct vmbus_channel_interface *interface);
 
+extern struct completion hv_channel_ready;
+
 #endif /* _VMBUS_H_ */
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index c21731a..22c80ec 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
+#include <linux/completion.h>
 #include "version_info.h"
 #include "osd.h"
 #include "logging.h"
@@ -356,6 +357,8 @@
 
 	vmbus_drv_obj->GetChannelOffers();
 
+	wait_for_completion(&hv_channel_ready);
+
 cleanup:
 	DPRINT_EXIT(VMBUS_DRV);
 
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index a4555e6..014f6684 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -62,9 +62,8 @@
 					1) != 0) {
 				filename = malloc(strlen(iio_dir)
 						+ strlen(type)
-						+ 1
 						+ numstrlen
-						+ 1);
+						+ 6);
 				if (filename == NULL)
 					return -ENOMEM;
 				sprintf(filename, "%s%s%d/name",
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index 1f14cd4..294272d 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -20,7 +20,7 @@
 	if ((length == 0) || (bytes_per_datum == 0))
 		return -EINVAL;
 	__iio_update_ring_buffer(&ring->buf, bytes_per_datum, length);
-	ring->data = kmalloc(length*ring->buf.bpd, GFP_KERNEL);
+	ring->data = kmalloc(length*ring->buf.bpd, GFP_ATOMIC);
 	ring->read_p = NULL;
 	ring->write_p = NULL;
 	ring->last_written_p = NULL;
diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig
new file mode 100644
index 0000000..c2af492
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Kconfig
@@ -0,0 +1,7 @@
+config TOUCHSCREEN_INTEL_MID
+	tristate "Intel MID platform resistive touchscreen"
+	depends on INTEL_SCU_IPC
+	default y
+	help
+	  Say Y here if you have a Intel MID based touchscreen
+	  If unsure, say N.
diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile
new file mode 100644
index 0000000..2d638b0
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel_mid_touch.o
+
+
diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO
new file mode 100644
index 0000000..7157028
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/TODO
@@ -0,0 +1,2 @@
+- Move the driver to not think it is SPI (requires fixing some of the SFI
+  and firmware side)
diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
new file mode 100644
index 0000000..abba22f
--- /dev/null
+++ b/drivers/staging/mrst-touchscreen/intel-mid-touch.c
@@ -0,0 +1,864 @@
+/*
+ * intel_mid_touch.c - Intel MID Resistive Touch Screen Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; ifnot, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
+ * 			    Ramesh Agarwal (ramesh.agarwal@intel.com)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO:
+ *	kill off mrstouch_debug eventually
+ *	review conversion of r/m/w sequences
+ *	Replace interrupt mutex abuse
+ *	Kill of mrstouchdevp pointer
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/intel_scu_ipc.h>
+
+
+#if defined(MRSTOUCH_DEBUG)
+#define mrstouch_debug(fmt, args...)\
+	do { \
+		printk(KERN_DEBUG "\n[MRSTOUCH(%d)] - ", __LINE__); \
+		printk(KERN_DEBUG fmt, ##args); \
+	} while (0);
+#else
+#define mrstouch_debug(fmt, args...)
+#endif
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_ID1   0x00 /*PMIC ID1 register */
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_INT   0x04 /*PMIC interrupt register */
+#define PMIC_REG_MINT  0x05 /*PMIC interrupt mask register */
+
+/* ADC Interrupt registers */
+#define PMIC_REG_ADCINT   0x5F /*ADC interrupt register */
+#define PMIC_REG_MADCINT  0x60 /*ADC interrupt mask register */
+
+/* ADC Control registers */
+#define PMIC_REG_ADCCNTL1    0x61 /*ADC control register */
+
+/* ADC Channel Selection registers */
+#define PMICADDR0     0xA4
+#define END_OF_CHANNEL 0x1F
+
+/* ADC Result register */
+#define PMIC_REG_ADCSNS0H   0x64
+
+/* ADC channels for touch screen */
+#define MRST_TS_CHAN10   0xA /* Touch screen X+ connection */
+#define MRST_TS_CHAN11   0xB /* Touch screen X- connection */
+#define MRST_TS_CHAN12   0xC /* Touch screen Y+ connection */
+#define MRST_TS_CHAN13   0xD /* Touch screen Y- connection */
+
+/* Touch screen coordinate constants */
+#define TOUCH_PRESSURE   	50
+#define TOUCH_PRESSURE_FS	100
+
+#define XMOVE_LIMIT	5
+#define YMOVE_LIMIT	5
+#define XYMOVE_CNT	3
+
+#define MAX_10BIT	((1<<10)-1)
+
+/* Touch screen channel BIAS constants */
+#define XBIAS		0x20
+#define YBIAS		0x40
+#define ZBIAS		0x80
+
+/* Touch screen coordinates */
+#define MIN_X		10
+#define MAX_X		1024
+#define MIN_Y		10
+#define MAX_Y		1024
+#define WAIT_ADC_COMPLETION 10
+
+/* PMIC ADC round robin delays */
+#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */
+#define ADC_LOOP_DELAY1 0x1 /* 4.5  ms approximate */
+
+/* PMIC Vendor Identifiers */
+#define PMIC_VENDOR_FS  0 /* PMIC vendor FreeScale */
+#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */
+#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */
+#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */
+
+/* Touch screen device structure */
+struct mrstouch_dev {
+	struct spi_device *spi; /* SPI device associated with touch screen */
+	struct input_dev *input; /* input device for touchscreen*/
+	char 		phys[32]; /* Device name */
+	struct task_struct *pendet_thrd; /* PENDET interrupt handler */
+	struct mutex lock; /* Sync between interrupt and PENDET handler */
+	bool            busy; /* Busy flag */
+	u16             asr; /* Address selection register */
+	int             irq;    /* Touch screen IRQ # */
+	uint		vendor;  /* PMIC vendor */
+	uint		rev;  /* PMIC revision */
+	bool		suspended; /* Device suspended status */
+	bool		disabled;  /* Device disabled status */
+	u16		x;  /* X coordinate */
+	u16		y;  /* Y coordinate */
+	bool		pendown;  /* PEN position */
+} ;
+
+
+/* Global Pointer to Touch screen device */
+static struct mrstouch_dev *mrstouchdevp;
+
+/* Utility to read PMIC ID */
+static int mrstouch_pmic_id(uint *vendor, uint *rev)
+{
+	int err;
+	u8 r;
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
+	if (err)
+		return err;
+
+	*vendor = r & 0x7;
+	*rev = (r >> 3) & 0x7;
+
+	return 0;
+}
+
+/*
+ * Parse ADC channels to find end of the channel configured by other ADC user
+ * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
+ */
+static int mrstouch_chan_parse(struct mrstouch_dev *tsdev)
+{
+	int err, i, j, found;
+	u32 r32;
+
+	found = -1;
+
+	for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
+		if (found >= 0)
+			break;
+
+		err = intel_scu_ipc_ioread32(PMICADDR0, &r32);
+		if (err)
+			return err;
+
+		for (j = 0; j < 32; j+= 8) {
+			if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) {
+				found = i;
+				break;
+			}
+		}
+	}
+	if (found < 0)
+		return 0;
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+			return -ENOSPC;
+	} else {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+			return -ENOSPC;
+	}
+	return found;
+}
+
+/* Utility to enable/disable pendet.
+ * pendet set to true enables PENDET interrupt
+ * pendet set to false disables PENDET interrupt
+ * Also clears RND mask bit
+*/
+static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet)
+{
+	u16 reg;
+	u8 r;
+	u8 pendet_enabled = 0;
+	int retry = 0;
+	int err;
+
+	err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, &reg);
+	if (err)
+		return err;
+
+	if (pendet) {
+		reg &= ~0x0005;
+		reg |= 0x2000; /* Enable pendet */
+	} else
+		reg &= 0xDFFF; /* Disable pendet */
+
+	/* Set MADCINT and update ADCCNTL1 (next reg byte) */
+	err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg);
+	if (!pendet || err)
+		return err;
+
+	/*
+	 * Sometimes even after the register write succeeds
+	 * the PMIC register value is not updated. Retry few iterations
+	 * to enable pendet.
+	 */
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+	pendet_enabled = (r >> 5) & 0x01;
+
+	retry = 0;
+	while (!err && !pendet_enabled) {
+		retry++;
+		msleep(10);
+		err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, reg >> 8);
+		if (err)
+			break;
+		err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r);
+		if (err == 0)
+			pendet_enabled = (r >> 5) & 0x01;
+		if (retry >= 10) {
+			dev_err(&tsdev->spi->dev, "Touch screen disabled.\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+/* To read PMIC ADC touch screen result
+ * Reads ADC storage registers for higher 7 and lower 3 bits
+ * converts the two readings to single value and turns off gain bit
+ */
+static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
+{
+	int err;
+	u16 result;
+	u32 res;
+
+	result = PMIC_REG_ADCSNS0H + offset;
+
+	if (chan == MRST_TS_CHAN12)
+		result += 4;
+
+	err = intel_scu_ipc_ioread32(result, &res);
+	if (err)
+		return err;
+
+	/* Mash the bits up */
+
+	*vp = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vp |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vp &= 0x3FF;
+
+	res >>= 16;
+
+	*vm = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vm |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vm &= 0x3FF;
+
+	return 0;
+}
+
+/* To configure touch screen channels
+ * Writes touch screen channels to ADC address selection registers
+ */
+static int mrstouch_ts_chan_set(uint offset)
+{
+	int count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	chan = PMICADDR0 + offset;
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = MRST_TS_CHAN10 + count;
+	}
+	reg[count] = chan;
+	data[count] = END_OF_CHANNEL;
+
+	return intel_scu_ipc_writev(reg, data, 5);
+}
+
+/* Initialize ADC */
+static int mrstouch_adc_init(struct mrstouch_dev *tsdev)
+{
+	int err, start;
+	u8 ra, rm;
+
+	err = mrstouch_pmic_id(&tsdev->vendor, &tsdev->rev);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n");
+		return err;
+	}
+
+	start = mrstouch_chan_parse(tsdev);
+	if (start < 0) {
+		dev_err(&tsdev->spi->dev, "Unable to parse channels\n");
+		return start;
+	}
+
+	tsdev->asr = start;
+
+	mrstouch_debug("Channel offset(%d): 0x%X\n", tsdev->asr, tsdev->vendor);
+
+	/* ADC power on, start, enable PENDET and set loop delay
+	 * ADC loop delay is set to 4.5 ms approximately
+	 * Loop delay more than this results in jitter in adc readings
+	 * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+	 * interrupt generation sometimes.
+	 */
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		ra = 0xE0 | ADC_LOOP_DELAY0;
+		rm = 0x5;
+	} else {
+		/* NEC and MAXIm not consistent with loop delay 0 */
+		ra = 0xE0 | ADC_LOOP_DELAY1;
+		rm = 0x0;
+
+		/* configure touch screen channels */
+		err = mrstouch_ts_chan_set(tsdev->asr);
+		if (err)
+			return err;
+	}
+	err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
+	if (err == 0)
+		err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
+	return err;
+}
+
+/* Reports x,y coordinates to event subsystem */
+static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z)
+{
+	int xdiff, ydiff;
+
+	if (tsdev->pendown && z <= TOUCH_PRESSURE) {
+		/* Pen removed, report button release */
+		mrstouch_debug("BTN REL(%d)", z);
+		input_report_key(tsdev->input, BTN_TOUCH, 0);
+		tsdev->pendown = false;
+	}
+
+	xdiff = abs(x - tsdev->x);
+	ydiff = abs(y - tsdev->y);
+
+	/*
+	if x and y values changes for XYMOVE_CNT readings it is considered
+	as stylus is moving. This is required to differentiate between stylus
+	movement and jitter
+	*/
+	if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) {
+		/* Spurious values, release button if touched and return */
+		if (tsdev->pendown) {
+			mrstouch_debug("BTN REL(%d)", z);
+			input_report_key(tsdev->input, BTN_TOUCH, 0);
+			tsdev->pendown = false;
+		}
+		return;
+	} else if (xdiff >= XMOVE_LIMIT || ydiff >= YMOVE_LIMIT) {
+		tsdev->x = x;
+		tsdev->y = y;
+
+		input_report_abs(tsdev->input, ABS_X, x);
+		input_report_abs(tsdev->input, ABS_Y, y);
+		input_sync(tsdev->input);
+	}
+
+
+	if (!tsdev->pendown && z > TOUCH_PRESSURE) {
+		/* Pen touched, report button touch */
+		mrstouch_debug("BTN TCH(%d, %d, %d)", x, y, z);
+		input_report_key(tsdev->input, BTN_TOUCH, 1);
+		tsdev->pendown = true;
+	}
+}
+
+
+/* Utility to start ADC, used by freescale handler */
+static int pendet_mask(void)
+{
+	return 	intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
+}
+
+/* Utility to stop ADC, used by freescale handler */
+static int pendet_umask(void)
+{
+	return 	intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
+}
+
+/* Utility to read ADC, used by freescale handler */
+static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev)
+{
+	int err;
+	u16 x, y, z, result;
+	u16 reg[4];
+	u8 data[4];
+
+	result = PMIC_REG_ADCSNS0H + tsdev->asr;
+
+	reg[0] = result + 4;
+	reg[1] = result + 5;
+	reg[2] = result + 16;
+	reg[3] = result + 17;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	x = data[0] << 3; /* Higher 7 bits */
+	x |= data[1] & 0x7; /* Lower 3 bits */
+	x &= 0x3FF;
+
+	y = data[2] << 3; /* Higher 7 bits */
+	y |= data[3] & 0x7; /* Lower 3 bits */
+	y &= 0x3FF;
+
+	/* Read Z value */
+	reg[0] = result + 28;
+	reg[1] = result + 29;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	z = data[0] << 3; /* Higher 7 bits */
+	z |= data[1] & 0x7; /* Lower 3 bits */
+	z &= 0x3FF;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+	mrstouch_debug("X: %d, Y: %d, Z: %d", x, y, z);
+#endif
+
+	if (z >= TOUCH_PRESSURE_FS) {
+		mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE - 1); /* Pen Removed */
+		return TOUCH_PRESSURE - 1;
+	} else {
+		mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE + 1); /* Pen Touched */
+		return TOUCH_PRESSURE + 1;
+	}
+
+	return 0;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during fs_adc read\n");
+	return err;
+}
+
+/* To handle free scale pmic pendet interrupt */
+static int pmic0_pendet(void *dev_id)
+{
+	int err, count;
+	u16 chan;
+	unsigned int touched;
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)dev_id;
+	u16 reg[5];
+	u8 data[5];
+
+	chan = PMICADDR0 + tsdev->asr;
+
+	/* Set X BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x2A;
+	}
+	reg[count] =  chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Y BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x4A;
+	}
+	reg[count] = chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Z BIAS */
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/*Read touch screen channels till pen removed
+	 * Freescale reports constant value of z for all points
+	 * z is high when screen is not touched and low when touched
+	 * Map high z value to not touched and low z value to pen touched
+	 */
+	touched = mrstouch_pmic_fs_adc_read(tsdev);
+	while (touched > TOUCH_PRESSURE) {
+		touched = mrstouch_pmic_fs_adc_read(tsdev);
+		msleep(WAIT_ADC_COMPLETION);
+	}
+
+	/* Clear all TS channels */
+	chan = PMICADDR0 + tsdev->asr;
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during pendet\n");
+	return err;
+}
+
+
+/* To enable X, Y and Z bias values
+ * Enables YPYM for X channels and XPXM for Y channels
+ */
+static int mrstouch_ts_bias_set(uint offset, uint bias)
+{
+	int count;
+	u16 chan, start;
+	u16 reg[4];
+	u8 data[4];
+
+	chan = PMICADDR0 + offset;
+	start = MRST_TS_CHAN10;
+
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = bias | (start + count);
+	}
+	return intel_scu_ipc_writev(reg, data, 4);
+}
+
+/* To read touch screen channel values */
+static int mrstouch_adc_read(struct mrstouch_dev *tsdev)
+{
+	int err;
+	u16 xp, xm, yp, ym, zp, zm;
+
+	/* configure Y bias for X channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, YBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read x+ and x- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &xp, &xm);
+	if (err)
+		goto ipc_error;
+
+	/* configure x bias for y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, XBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read y+ and y- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, &yp, &ym);
+	if (err)
+		goto ipc_error;
+
+	/* configure z bias for x and y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, ZBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read z+ and z- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &zp, &zm);
+	if (err)
+		goto ipc_error;
+
+#if defined(MRSTOUCH_PRINT_XYZP)
+	printk(KERN_INFO "X+: %d, Y+: %d, Z+: %d\n", xp, yp, zp);
+#endif
+
+#if defined(MRSTOUCH_PRINT_XYZM)
+	printk(KERN_INFO "X-: %d, Y-: %d, Z-: %d\n", xm, ym, zm);
+#endif
+
+	mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */
+
+	return zp;
+
+ipc_error:
+	dev_err(&tsdev->spi->dev, "ipc error during adc read\n");
+	return err;
+}
+
+/* PENDET interrupt handler function for NEC and MAXIM */
+static void pmic12_pendet(void *data)
+{
+	unsigned int touched;
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+
+	/* read touch screen channels till pen removed */
+	do {
+		touched = mrstouch_adc_read(tsdev);
+	} while (touched > TOUCH_PRESSURE);
+}
+
+/* Handler to process PENDET interrupt */
+int mrstouch_pendet(void *data)
+{
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data;
+	while (1) {
+		/* Wait for PENDET interrupt */
+		if (mutex_lock_interruptible(&tsdev->lock)) {
+			msleep(WAIT_ADC_COMPLETION);
+			continue;
+		}
+
+		if (tsdev->busy)
+			return 0;
+
+		tsdev->busy = true;
+
+		if (tsdev->vendor == PMIC_VENDOR_NEC ||
+			tsdev->vendor == PMIC_VENDOR_MAXIM) {
+			/* PENDET must be disabled in NEC before reading ADC */
+			pendet_enable(tsdev,false); /* Disbale PENDET */
+			pmic12_pendet(tsdev);
+			pendet_enable(tsdev, true); /*Enable PENDET */
+		} else if (tsdev->vendor == PMIC_VENDOR_FS) {
+			pendet_umask(); /* Stop ADC */
+			pmic0_pendet(tsdev);
+			pendet_mask(); /* Stop ADC */
+		} else
+		dev_err(&tsdev->spi->dev, "Unsupported touchscreen: %d\n",
+				tsdev->vendor);
+
+		tsdev->busy = false;
+
+	}
+	return 0;
+}
+
+/* PENDET interrupt handler */
+static irqreturn_t pendet_intr_handler(int irq, void *handle)
+{
+	struct mrstouch_dev *tsdev = (struct mrstouch_dev *)handle;
+
+	mutex_unlock(&tsdev->lock);
+	return IRQ_HANDLED;
+}
+
+/* Intializes input device and registers with input subsystem */
+static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi)
+{
+	int err = 0;
+
+	mrstouch_debug("%s", __func__);
+
+	tsdev->input = input_allocate_device();
+	if (!tsdev->input) {
+		dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n");
+		return -EINVAL;
+	}
+
+	tsdev->input->name = "mrst_touchscreen";
+	snprintf(tsdev->phys, sizeof(tsdev->phys),
+			"%s/input0", dev_name(&spi->dev));
+	tsdev->input->phys = tsdev->phys;
+	tsdev->input->dev.parent = &spi->dev;
+
+	tsdev->input->id.vendor = tsdev->vendor;
+	tsdev->input->id.version = tsdev->rev;
+
+	tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(tsdev->input, ABS_X, MIN_X, MIN_Y, 0, 0);
+	input_set_abs_params(tsdev->input, ABS_Y, MIN_X, MIN_Y, 0, 0);
+
+	err = input_register_device(tsdev->input);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "unable to register input device\n");
+		input_free_device(tsdev->input);
+		return err;
+	}
+
+	mrstouch_debug("%s", "mrstouch initialized");
+
+	return 0;
+
+}
+
+/* Probe function for touch screen driver */
+static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi)
+{
+	int err;
+	unsigned int myirq;
+	struct mrstouch_dev *tsdev;
+
+	mrstouch_debug("%s(%p)", __func__, mrstouch_spi);
+
+	mrstouchdevp = NULL;
+	myirq = mrstouch_spi->irq;
+
+	if (!mrstouch_spi->irq) {
+		dev_err(&mrstouch_spi->dev, "no interrupt assigned\n");
+		return -EINVAL;
+	}
+
+	tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
+	if (!tsdev) {
+		dev_err(&mrstouch_spi->dev, "unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	tsdev->irq = myirq;
+	mrstouchdevp = tsdev;
+
+	err = mrstouch_adc_init(tsdev);
+	if (err) {
+		dev_err(&mrstouch_spi->dev, "ADC init failed\n");
+		goto mrstouch_err_free_mem;
+	}
+
+	dev_set_drvdata(&mrstouch_spi->dev, tsdev);
+	tsdev->spi = mrstouch_spi;
+
+	err = ts_input_dev_init(tsdev, mrstouch_spi);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "ts_input_dev_init failed");
+		goto mrstouch_err_free_mem;
+	}
+
+	mutex_init(&tsdev->lock);
+	mutex_lock(&tsdev->lock)
+
+	mrstouch_debug("Requesting IRQ-%d", myirq);
+	err = request_irq(myirq, pendet_intr_handler,
+				0, "mrstouch", tsdev);
+	if (err) {
+		dev_err(&tsdev->spi->dev, "unable to allocate irq\n");
+		goto mrstouch_err_free_mem;
+	}
+
+	tsdev->pendet_thrd = kthread_run(mrstouch_pendet,
+				(void *)tsdev, "pendet handler");
+	if (IS_ERR(tsdev->pendet_thrd)) {
+		dev_err(&tsdev->spi->dev, "kthread_run failed\n");
+		err = PTR_ERR(tsdev->pendet_thrd);
+		goto mrstouch_err_free_mem;
+	}
+	mrstouch_debug("%s", "Driver initialized");
+	return 0;
+
+mrstouch_err_free_mem:
+	kfree(tsdev);
+	return err;
+}
+
+static int mrstouch_suspend(struct spi_device *spi, pm_message_t msg)
+{
+	mrstouch_debug("%s", __func__);
+	mrstouchdevp->suspended = 1;
+	return 0;
+}
+
+static int mrstouch_resume(struct spi_device *spi)
+{
+	mrstouch_debug("%s", __func__);
+	mrstouchdevp->suspended = 0;
+	return 0;
+}
+
+static int mrstouch_remove(struct spi_device *spi)
+{
+	mrstouch_debug("%s", __func__);
+	free_irq(mrstouchdevp->irq, mrstouchdevp);
+	input_unregister_device(mrstouchdevp->input);
+	input_free_device(mrstouchdevp->input);
+	if (mrstouchdevp->pendet_thrd)
+		kthread_stop(mrstouchdevp->pendet_thrd);
+	kfree(mrstouchdevp);
+	return 0;
+}
+
+static struct spi_driver mrstouch_driver = {
+	.driver = {
+		.name   = "pmic_touch",
+		.bus    = &spi_bus_type,
+		.owner  = THIS_MODULE,
+	},
+	.probe          = mrstouch_probe,
+	.suspend        = mrstouch_suspend,
+	.resume         = mrstouch_resume,
+	.remove         = mrstouch_remove,
+};
+
+static int __init mrstouch_module_init(void)
+{
+	int err;
+
+	mrstouch_debug("%s", __func__);
+	err = spi_register_driver(&mrstouch_driver);
+	if (err) {
+		mrstouch_debug("%s(%d)", "SPI PENDET failed", err);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __exit mrstouch_module_exit(void)
+{
+	mrstouch_debug("%s", __func__);
+	spi_unregister_driver(&mrstouch_driver);
+	return;
+}
+
+module_init(mrstouch_module_init);
+module_exit(mrstouch_module_exit);
+
+MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
+MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/msm/Kconfig b/drivers/staging/msm/Kconfig
new file mode 100644
index 0000000..c57039f
--- /dev/null
+++ b/drivers/staging/msm/Kconfig
@@ -0,0 +1,134 @@
+config MSM_STAGING
+	tristate "MSM Frame Buffer Support"
+	depends on FB && ARCH_MSM && !FB_MSM
+	select FB_BACKLIGHT if FB_MSM_BACKLIGHT
+	select NEW_LEDS
+	select LEDS_CLASS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for MSM Framebuffer.
+
+if MSM_STAGING
+
+config FB_MSM_LCDC_HW
+	bool
+	default n
+
+choice
+	prompt "MDP HW version"
+	default FB_MSM_MDP31
+
+config FB_MSM_MDP31
+	select FB_MSM_LCDC_HW
+	bool "MDP HW ver3.1"
+	---help---
+	  Support for MSM MDP HW revision 3.1
+	  Say Y here if this is msm8x50 variant platform.
+endchoice
+
+config FB_MSM_LCDC
+	bool
+	default n
+
+config FB_MSM_TVOUT
+	bool
+	default n
+
+config FB_MSM_LCDC_PANEL
+	bool
+	select FB_MSM_LCDC
+	default n
+
+config FB_MSM_LCDC_PRISM_WVGA
+        bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+config FB_MSM_LCDC_ST1_WXGA
+	bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+config FB_MSM_LCDC_ST15_WXGA
+        bool
+        select FB_MSM_LCDC_PANEL
+        default n
+
+config FB_MSM_LCDC_WXGA
+	bool
+	select FB_MSM_LCDC_PANEL
+	default n
+
+choice
+	prompt "LCD Panel"
+	default FB_MSM_LCDC_ST15_PANEL
+
+config FB_MSM_LCDC_PRISM_WVGA_PANEL
+	depends on FB_MSM_LCDC_HW
+	bool "LCDC Prism WVGA Panel"
+	select FB_MSM_LCDC_PRISM_WVGA
+	---help---
+	  Support for LCDC Prism WVGA (800x480) panel
+
+
+config FB_MSM_LCDC_ST15_PANEL
+        depends on FB_MSM_LCDC_HW
+        bool "LCDC ST1.5 Panel"
+        select FB_MSM_LCDC_ST15_WXGA
+        ---help---
+          Support for ST1.5 WXGA (1366x768) panel
+
+config FB_MSM_PANEL_NONE
+	bool "NONE"
+	---help---
+	  This will disable LCD panel
+endchoice
+
+choice
+	prompt "Secondary LCD Panel"
+	depends on  FB_MSM_MDP31
+	default FB_MSM_SECONDARY_PANEL_NONE
+
+config FB_MSM_SECONDARY_PANEL_NONE
+	bool "NONE"
+	---help---
+	  No secondary panel
+endchoice
+
+config FB_MSM_TVOUT_NTSC
+	bool
+	select FB_MSM_TVOUT
+	default n
+
+config FB_MSM_TVOUT_PAL
+	bool
+	select FB_MSM_TVOUT
+	default n
+
+choice
+	depends on  (FB_MSM_MDP22 || FB_MSM_MDP31)
+	prompt "TVOut Region"
+	default FB_MSM_TVOUT_NTSC_M
+
+config FB_MSM_TVOUT_NTSC_M
+	bool "NTSC M"
+	select FB_MSM_TVOUT_NTSC
+	---help---
+	  Support for NTSC M region (North American and Korea)
+
+config FB_MSM_TVOUT_NONE
+	bool "NONE"
+	---help---
+	  This will disable TV Out functionality.
+endchoice
+
+config PMEM_KERNEL_SIZE
+        int "PMEM for kernel components (in MB)"
+        default 2
+        depends on ARCH_QSD8X50
+        help
+          Configures the amount of PMEM for use by kernel components
+          (in MB; minimum 2MB)
+endif
diff --git a/drivers/staging/msm/Makefile b/drivers/staging/msm/Makefile
new file mode 100644
index 0000000..98a0ce1
--- /dev/null
+++ b/drivers/staging/msm/Makefile
@@ -0,0 +1,93 @@
+obj-y := msm_fb.o staging-devices.o memory.o
+
+obj-$(CONFIG_FB_MSM_LOGO) += logo.o
+obj-$(CONFIG_FB_BACKLIGHT) += msm_fb_bl.o
+
+# MDP
+obj-y += mdp.o
+
+ifeq ($(CONFIG_FB_MSM_MDP40),y)
+obj-y += mdp4_util.o
+obj-$(CONFIG_DEBUG_FS) += mdp4_debugfs.o
+else
+obj-y += mdp_hw_init.o
+obj-y += mdp_ppp.o
+ifeq ($(CONFIG_FB_MSM_MDP31),y)
+obj-y += mdp_ppp_v31.o
+obj-$(CONFIG_MDP_PPP_ASYNC_OP) += mdp_ppp_dq.o
+else
+obj-y += mdp_ppp_v20.o
+endif
+endif
+
+ifeq ($(CONFIG_FB_MSM_OVERLAY),y)
+obj-y += mdp4_overlay.o
+obj-y += mdp4_overlay_lcdc.o
+obj-y += mdp4_overlay_mddi.o
+else
+obj-y += mdp_dma_lcdc.o
+endif
+
+obj-y += mdp_dma.o
+obj-y += mdp_dma_s.o
+obj-y += mdp_vsync.o
+obj-y += mdp_cursor.o
+obj-y += mdp_dma_tv.o
+
+# EBI2
+obj-$(CONFIG_FB_MSM_EBI2) += ebi2_lcd.o
+
+# LCDC
+obj-$(CONFIG_FB_MSM_LCDC) += lcdc.o
+
+# MDDI
+msm_mddi-objs := mddi.o mddihost.o mddihosti.o
+obj-$(CONFIG_FB_MSM_MDDI) += msm_mddi.o
+
+# External MDDI
+msm_mddi_ext-objs := mddihost_e.o mddi_ext.o
+obj-$(CONFIG_FB_MSM_EXTMDDI) += msm_mddi_ext.o
+
+# TVEnc
+obj-$(CONFIG_FB_MSM_TVOUT) += tvenc.o
+
+# MSM FB Panel
+obj-y += msm_fb_panel.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_tmd20.o
+obj-$(CONFIG_FB_MSM_EBI2_TMD_QVGA_EPSON_QCIF) += ebi2_l2f.o
+
+ifeq ($(CONFIG_FB_MSM_MDDI_AUTO_DETECT),y)
+obj-y += mddi_prism.o
+obj-y += mddi_toshiba.o
+obj-y += mddi_toshiba_vga.o
+obj-y += mddi_toshiba_wvga_pt.o
+obj-y += mddi_toshiba_wvga.o
+obj-y += mddi_sharp.o
+else
+obj-$(CONFIG_FB_MSM_MDDI_PRISM_WVGA) += mddi_prism.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON) += mddi_toshiba.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON_VGA) += mddi_toshiba_vga.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA_PORTRAIT) += mddi_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA) += mddi_toshiba_wvga.o
+obj-$(CONFIG_FB_MSM_MDDI_SHARP_QVGA_128x128) += mddi_sharp.o
+endif
+
+obj-$(CONFIG_FB_MSM_LCDC_PANEL) += lcdc_panel.o
+obj-$(CONFIG_FB_MSM_LCDC_PRISM_WVGA) += lcdc_prism.o
+obj-$(CONFIG_FB_MSM_LCDC_EXTERNAL_WXGA) += lcdc_external.o
+obj-$(CONFIG_FB_MSM_LCDC_GORDON_VGA) += lcdc_gordon.o
+obj-$(CONFIG_FB_MSM_LCDC_WXGA) += lcdc_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_TOSHIBA_WVGA_PT) += lcdc_toshiba_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_SHARP_WVGA_PT) += lcdc_sharp_wvga_pt.o
+obj-$(CONFIG_FB_MSM_LCDC_GRAPEFRUIT_VGA) += lcdc_grapefruit.o
+obj-$(CONFIG_FB_MSM_LCDC_ST1_WXGA) += lcdc_st1_wxga.o
+obj-$(CONFIG_FB_MSM_LCDC_ST15_WXGA) += lcdc_st15.o
+obj-$(CONFIG_FB_MSM_HDMI_SII_EXTERNAL_720P) += hdmi_sii9022.o
+
+obj-$(CONFIG_FB_MSM_TVOUT_NTSC) += tv_ntsc.o
+obj-$(CONFIG_FB_MSM_TVOUT_PAL) += tv_pal.o
+
+obj-$(CONFIG_FB_MSM_EXTMDDI_SVGA) += mddi_ext_lcd.o
+
+clean:
+	rm *.o .*cmd
diff --git a/drivers/staging/msm/TODO b/drivers/staging/msm/TODO
new file mode 100644
index 0000000..05107a7
--- /dev/null
+++ b/drivers/staging/msm/TODO
@@ -0,0 +1,3 @@
+- Merge this code with the existing MSM framebuffer
+- General style clean ups.
+
diff --git a/drivers/staging/msm/ebi2_l2f.c b/drivers/staging/msm/ebi2_l2f.c
new file mode 100644
index 0000000..eea891d
--- /dev/null
+++ b/drivers/staging/msm/ebi2_l2f.c
@@ -0,0 +1,569 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* The following are for MSM5100 on Gator
+*/
+#ifdef FEATURE_PM1000
+#include "pm1000.h"
+#endif /* FEATURE_PM1000 */
+/* The following are for MSM6050 on Bambi
+*/
+#ifdef FEATURE_PMIC_LCDKBD_LED_DRIVER
+#include "pm.h"
+#endif /* FEATURE_PMIC_LCDKBD_LED_DRIVER */
+
+#ifdef DISP_DEVICE_18BPP
+#undef DISP_DEVICE_18BPP
+#define DISP_DEVICE_16BPP
+#endif
+
+#define QCIF_WIDTH        176
+#define QCIF_HEIGHT       220
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_CMD_DISON    0xaf
+#define DISP_CMD_DISOFF   0xae
+#define DISP_CMD_DISNOR   0xa6
+#define DISP_CMD_DISINV   0xa7
+#define DISP_CMD_DISCTL   0xca
+#define DISP_CMD_GCP64    0xcb
+#define DISP_CMD_GCP16    0xcc
+#define DISP_CMD_GSSET    0xcd
+#define DISP_GS_2       0x02
+#define DISP_GS_16      0x01
+#define DISP_GS_64      0x00
+#define DISP_CMD_SLPIN    0x95
+#define DISP_CMD_SLPOUT   0x94
+#define DISP_CMD_SD_PSET  0x75
+#define DISP_CMD_MD_PSET  0x76
+#define DISP_CMD_SD_CSET  0x15
+#define DISP_CMD_MD_CSET  0x16
+#define DISP_CMD_DATCTL   0xbc
+#define DISP_DATCTL_666 0x08
+#define DISP_DATCTL_565 0x28
+#define DISP_DATCTL_444 0x38
+#define DISP_CMD_RAMWR    0x5c
+#define DISP_CMD_RAMRD    0x5d
+#define DISP_CMD_PTLIN    0xa8
+#define DISP_CMD_PTLOUT   0xa9
+#define DISP_CMD_ASCSET   0xaa
+#define DISP_CMD_SCSTART  0xab
+#define DISP_CMD_VOLCTL   0xc6
+#define DISP_VOLCTL_TONE 0x80
+#define DISP_CMD_NOp      0x25
+#define DISP_CMD_OSSEL    0xd0
+#define DISP_CMD_3500KSET 0xd1
+#define DISP_CMD_3500KEND 0xd2
+#define DISP_CMD_14MSET   0xd3
+#define DISP_CMD_14MEND   0xd4
+
+#define DISP_CMD_OUT(cmd) outpw(DISP_CMD_PORT, cmd);
+
+#define DISP_DATA_OUT(data) outpw(DISP_DATA_PORT, data);
+
+#define DISP_DATA_IN() inpw(DISP_DATA_PORT);
+
+/* Epson device column number starts at 2
+*/
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+	  DISP_CMD_OUT(DISP_CMD_SD_PSET) \
+	  DISP_DATA_OUT((ulhc_row) & 0xFF) \
+	  DISP_DATA_OUT((ulhc_row) >> 8) \
+	  DISP_DATA_OUT((lrhc_row) & 0xFF) \
+	  DISP_DATA_OUT((lrhc_row) >> 8) \
+	  DISP_CMD_OUT(DISP_CMD_SD_CSET) \
+	  DISP_DATA_OUT(((ulhc_col)+2) & 0xFF) \
+	  DISP_DATA_OUT(((ulhc_col)+2) >> 8) \
+	  DISP_DATA_OUT(((lrhc_col)+2) & 0xFF) \
+	  DISP_DATA_OUT(((lrhc_col)+2) >> 8)
+
+#define DISP_MIN_CONTRAST      0
+#define DISP_MAX_CONTRAST      127
+#define DISP_DEFAULT_CONTRAST  80
+
+#define DISP_MIN_BACKLIGHT     0
+#define DISP_MAX_BACKLIGHT     15
+#define DISP_DEFAULT_BACKLIGHT 2
+
+#define WAIT_SEC(sec) mdelay((sec)/1000)
+
+static word disp_area_start_row;
+static word disp_area_end_row;
+static byte disp_contrast = DISP_DEFAULT_CONTRAST;
+static boolean disp_powered_up;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+ * it again
+ */
+static boolean display_on = FALSE;
+static void epsonQcif_disp_init(struct platform_device *pdev);
+static void epsonQcif_disp_set_contrast(word contrast);
+static void epsonQcif_disp_set_display_area(word start_row, word end_row);
+static int epsonQcif_disp_off(struct platform_device *pdev);
+static int epsonQcif_disp_on(struct platform_device *pdev);
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres);
+
+volatile word databack;
+static void epsonQcif_disp_init(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	int i;
+
+	if (disp_initialized)
+		return;
+
+	mfd = platform_get_drvdata(pdev);
+
+	DISP_CMD_PORT = mfd->cmd_port;
+	DISP_DATA_PORT = mfd->data_port;
+
+	/* Sleep in */
+	DISP_CMD_OUT(DISP_CMD_SLPIN);
+
+	/* Display off */
+	DISP_CMD_OUT(DISP_CMD_DISOFF);
+
+	/* Display normal */
+	DISP_CMD_OUT(DISP_CMD_DISNOR);
+
+	/* Set data mode */
+	DISP_CMD_OUT(DISP_CMD_DATCTL);
+	DISP_DATA_OUT(DISP_DATCTL_565);
+
+	/* Set display timing */
+	DISP_CMD_OUT(DISP_CMD_DISCTL);
+	DISP_DATA_OUT(0x1c);	/* p1 */
+	DISP_DATA_OUT(0x02);	/* p1 */
+	DISP_DATA_OUT(0x82);	/* p2 */
+	DISP_DATA_OUT(0x00);	/* p3 */
+	DISP_DATA_OUT(0x00);	/* p4 */
+	DISP_DATA_OUT(0xe0);	/* p5 */
+	DISP_DATA_OUT(0x00);	/* p5 */
+	DISP_DATA_OUT(0xdc);	/* p6 */
+	DISP_DATA_OUT(0x00);	/* p6 */
+	DISP_DATA_OUT(0x02);	/* p7 */
+	DISP_DATA_OUT(0x00);	/* p8 */
+
+	/* Set 64 gray scale level */
+	DISP_CMD_OUT(DISP_CMD_GCP64);
+	DISP_DATA_OUT(0x08);	/* p01 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x2a);	/* p02 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x4e);	/* p03 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x6b);	/* p04 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x88);	/* p05 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xa3);	/* p06 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xba);	/* p07 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xd1);	/* p08 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xe5);	/* p09 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0xf3);	/* p10 */
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x03);	/* p11 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x13);	/* p12 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x22);	/* p13 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x2f);	/* p14 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x3b);	/* p15 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x46);	/* p16 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x51);	/* p17 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x5b);	/* p18 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x64);	/* p19 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x6c);	/* p20 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x74);	/* p21 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x7c);	/* p22 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x83);	/* p23 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x8a);	/* p24 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x91);	/* p25 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x98);	/* p26 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x9f);	/* p27 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xa6);	/* p28 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xac);	/* p29 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xb2);	/* p30 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xb7);	/* p31 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xbc);	/* p32 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xc1);	/* p33 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xc6);	/* p34 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xcb);	/* p35 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd0);	/* p36 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd4);	/* p37 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xd8);	/* p38 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xdc);	/* p39 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe0);	/* p40 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe4);	/* p41 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xe8);	/* p42 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xec);	/* p43 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf0);	/* p44 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf4);	/* p45 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xf8);	/* p46 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xfb);	/* p47 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xfe);	/* p48 */
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0x01);	/* p49 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x03);	/* p50 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x05);	/* p51 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x07);	/* p52 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x09);	/* p53 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0b);	/* p54 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0d);	/* p55 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x0f);	/* p56 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x11);	/* p57 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x13);	/* p58 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x15);	/* p59 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x17);	/* p60 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x19);	/* p61 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x1b);	/* p62 */
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x1c);	/* p63 */
+	DISP_DATA_OUT(0x02);
+
+	/* Set 16 gray scale level */
+	DISP_CMD_OUT(DISP_CMD_GCP16);
+	DISP_DATA_OUT(0x1a);	/* p01 */
+	DISP_DATA_OUT(0x32);	/* p02 */
+	DISP_DATA_OUT(0x42);	/* p03 */
+	DISP_DATA_OUT(0x4c);	/* p04 */
+	DISP_DATA_OUT(0x58);	/* p05 */
+	DISP_DATA_OUT(0x5f);	/* p06 */
+	DISP_DATA_OUT(0x66);	/* p07 */
+	DISP_DATA_OUT(0x6b);	/* p08 */
+	DISP_DATA_OUT(0x70);	/* p09 */
+	DISP_DATA_OUT(0x74);	/* p10 */
+	DISP_DATA_OUT(0x78);	/* p11 */
+	DISP_DATA_OUT(0x7b);	/* p12 */
+	DISP_DATA_OUT(0x7e);	/* p13 */
+	DISP_DATA_OUT(0x80);	/* p14 */
+	DISP_DATA_OUT(0x82);	/* p15 */
+
+	/* Set DSP column */
+	DISP_CMD_OUT(DISP_CMD_MD_CSET);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x03);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x03);
+
+	/* Set DSP page */
+	DISP_CMD_OUT(DISP_CMD_MD_PSET);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x01);
+	DISP_DATA_OUT(0xff);
+	DISP_DATA_OUT(0x01);
+
+	/* Set ARM column */
+	DISP_CMD_OUT(DISP_CMD_SD_CSET);
+	DISP_DATA_OUT(0x02);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT((QCIF_WIDTH + 1) & 0xFF);
+	DISP_DATA_OUT((QCIF_WIDTH + 1) >> 8);
+
+	/* Set ARM page */
+	DISP_CMD_OUT(DISP_CMD_SD_PSET);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT(0x00);
+	DISP_DATA_OUT((QCIF_HEIGHT - 1) & 0xFF);
+	DISP_DATA_OUT((QCIF_HEIGHT - 1) >> 8);
+
+	/* Set 64 gray scales */
+	DISP_CMD_OUT(DISP_CMD_GSSET);
+	DISP_DATA_OUT(DISP_GS_64);
+
+	DISP_CMD_OUT(DISP_CMD_OSSEL);
+	DISP_DATA_OUT(0);
+
+	/* Sleep out */
+	DISP_CMD_OUT(DISP_CMD_SLPOUT);
+
+	WAIT_SEC(40000);
+
+	/* Initialize power IC */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+	WAIT_SEC(40000);
+
+	/* Set electronic volume, d'xx */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_DEFAULT_CONTRAST);	/* value from 0 to 127 */
+
+	/* Initialize display data */
+	DISP_SET_RECT(0, (QCIF_HEIGHT - 1), 0, (QCIF_WIDTH - 1));
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	for (i = 0; i < QCIF_HEIGHT * QCIF_WIDTH; i++)
+		DISP_DATA_OUT(0xffff);
+
+	DISP_CMD_OUT(DISP_CMD_RAMRD);
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+	databack = DISP_DATA_IN();
+
+	WAIT_SEC(80000);
+
+	DISP_CMD_OUT(DISP_CMD_DISON);
+
+	disp_area_start_row = 0;
+	disp_area_end_row = QCIF_HEIGHT - 1;
+	disp_powered_up = TRUE;
+	disp_initialized = TRUE;
+	epsonQcif_disp_set_display_area(0, QCIF_HEIGHT - 1);
+	display_on = TRUE;
+}
+
+static void epsonQcif_disp_set_rect(int x, int y, int xres, int yres)
+{
+	if (!disp_initialized)
+		return;
+
+	DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void epsonQcif_disp_set_display_area(word start_row, word end_row)
+{
+	if (!disp_initialized)
+		return;
+
+	if ((start_row == disp_area_start_row)
+	    && (end_row == disp_area_end_row))
+		return;
+	disp_area_start_row = start_row;
+	disp_area_end_row = end_row;
+
+	/* Range checking
+	 */
+	if (end_row >= QCIF_HEIGHT)
+		end_row = QCIF_HEIGHT - 1;
+	if (start_row > end_row)
+		start_row = end_row;
+
+	/* When display is not the full screen, gray scale is set to
+	 ** 2; otherwise it is set to 64.
+	 */
+	if ((start_row == 0) && (end_row == (QCIF_HEIGHT - 1))) {
+		/* The whole screen */
+		DISP_CMD_OUT(DISP_CMD_PTLOUT);
+		WAIT_SEC(10000);
+		DISP_CMD_OUT(DISP_CMD_DISOFF);
+		WAIT_SEC(100000);
+		DISP_CMD_OUT(DISP_CMD_GSSET);
+		DISP_DATA_OUT(DISP_GS_64);
+		WAIT_SEC(100000);
+		DISP_CMD_OUT(DISP_CMD_DISON);
+	} else {
+		/* partial screen */
+		DISP_CMD_OUT(DISP_CMD_PTLIN);
+		DISP_DATA_OUT(start_row);
+		DISP_DATA_OUT(start_row >> 8);
+		DISP_DATA_OUT(end_row);
+		DISP_DATA_OUT(end_row >> 8);
+		DISP_CMD_OUT(DISP_CMD_GSSET);
+		DISP_DATA_OUT(DISP_GS_2);
+	}
+}
+
+static int epsonQcif_disp_off(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		epsonQcif_disp_init(pdev);
+
+	if (display_on) {
+		DISP_CMD_OUT(DISP_CMD_DISOFF);
+		DISP_CMD_OUT(DISP_CMD_SLPIN);
+		display_on = FALSE;
+	}
+
+	return 0;
+}
+
+static int epsonQcif_disp_on(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		epsonQcif_disp_init(pdev);
+
+	if (!display_on) {
+		DISP_CMD_OUT(DISP_CMD_SLPOUT);
+		WAIT_SEC(40000);
+		DISP_CMD_OUT(DISP_CMD_DISON);
+		epsonQcif_disp_set_contrast(disp_contrast);
+		display_on = TRUE;
+	}
+
+	return 0;
+}
+
+static void epsonQcif_disp_set_contrast(word contrast)
+{
+	if (!disp_initialized)
+		return;
+
+	/* Initialize power IC, d'24 */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	DISP_DATA_OUT(DISP_VOLCTL_TONE);
+
+	WAIT_SEC(40000);
+
+	/* Set electronic volume, d'xx */
+	DISP_CMD_OUT(DISP_CMD_VOLCTL);
+	if (contrast > 127)
+		contrast = 127;
+	DISP_DATA_OUT(contrast);	/* value from 0 to 127 */
+	disp_contrast = (byte) contrast;
+}				/* End disp_set_contrast */
+
+static void epsonQcif_disp_clear_screen_area(
+	word start_row, word end_row, word start_column, word end_column) {
+	int32 i;
+
+	/* Clear the display screen */
+	DISP_SET_RECT(start_row, end_row, start_column, end_column);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	i = (end_row - start_row + 1) * (end_column - start_column + 1);
+	for (; i > 0; i--)
+		DISP_DATA_OUT(0xffff);
+}
+
+static int __init epsonQcif_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = epsonQcif_probe,
+	.driver = {
+		.name   = "ebi2_epson_qcif",
+	},
+};
+
+static struct msm_fb_panel_data epsonQcif_panel_data = {
+	.on = epsonQcif_disp_on,
+	.off = epsonQcif_disp_off,
+	.set_rect = epsonQcif_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+	.name   = "ebi2_epson_qcif",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &epsonQcif_panel_data,
+	}
+};
+
+static int __init epsonQcif_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &epsonQcif_panel_data.panel_info;
+		pinfo->xres = QCIF_WIDTH;
+		pinfo->yres = QCIF_HEIGHT;
+		pinfo->type = EBI2_PANEL;
+		pinfo->pdest = DISPLAY_2;
+		pinfo->wait_cycle = 0x808000;
+		pinfo->bpp = 16;
+		pinfo->fb_num = 2;
+		pinfo->lcd.vsync_enable = FALSE;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(epsonQcif_init);
diff --git a/drivers/staging/msm/ebi2_lcd.c b/drivers/staging/msm/ebi2_lcd.c
new file mode 100644
index 0000000..b41e123
--- /dev/null
+++ b/drivers/staging/msm/ebi2_lcd.c
@@ -0,0 +1,250 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb.h"
+
+static int ebi2_lcd_probe(struct platform_device *pdev);
+static int ebi2_lcd_remove(struct platform_device *pdev);
+
+static struct platform_driver ebi2_lcd_driver = {
+	.probe = ebi2_lcd_probe,
+	.remove = ebi2_lcd_remove,
+	.suspend = NULL,
+	.suspend_late = NULL,
+	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "ebi2_lcd",
+		   },
+};
+
+static void *ebi2_base;
+static void *ebi2_lcd_cfg0;
+static void *ebi2_lcd_cfg1;
+static void __iomem *lcd01_base;
+static void __iomem *lcd02_base;
+static int ebi2_lcd_resource_initialized;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int ebi2_lcd_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc, i;
+
+	if (pdev->id == 0) {
+		for (i = 0; i < pdev->num_resources; i++) {
+			if (!strncmp(pdev->resource[i].name, "base", 4)) {
+				ebi2_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!ebi2_base) {
+					printk(KERN_ERR
+						"ebi2_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+				ebi2_lcd_cfg0 = (void *)(ebi2_base + 0x20);
+				ebi2_lcd_cfg1 = (void *)(ebi2_base + 0x24);
+			} else if (!strncmp(pdev->resource[i].name,
+						"lcd01", 5)) {
+				lcd01_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!lcd01_base) {
+					printk(KERN_ERR
+						"lcd01_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+			} else if (!strncmp(pdev->resource[i].name,
+						"lcd02", 5)) {
+				lcd02_base = ioremap(pdev->resource[i].start,
+						pdev->resource[i].end -
+						pdev->resource[i].start + 1);
+				if (!lcd02_base) {
+					printk(KERN_ERR
+						"lcd02_base ioremap failed!\n");
+					return -ENOMEM;
+				}
+			}
+		}
+		ebi2_lcd_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!ebi2_lcd_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	if (ebi2_base == NULL)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/* link to the latest pdev */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCD;
+
+	/* add panel data */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "ebi2_lcd_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+
+	/* data chain */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = panel_next_on;
+	pdata->off = panel_next_off;
+	pdata->next = pdev;
+
+	/* get/set panel specific fb info */
+	mfd->panel_info = pdata->panel_info;
+
+	if (mfd->panel_info.bpp == 24)
+		mfd->fb_imgType = MDP_RGB_888;
+	else
+		mfd->fb_imgType = MDP_RGB_565;
+
+	/* config msm ebi2 lcd register */
+	if (mfd->panel_info.pdest == DISPLAY_1) {
+		outp32(ebi2_base,
+		       (inp32(ebi2_base) & (~(EBI2_PRIM_LCD_CLR))) |
+		       EBI2_PRIM_LCD_SEL);
+		/*
+		 * current design has one set of cfg0/1 register to control
+		 * both EBI2 channels. so, we're using the PRIM channel to
+		 * configure both.
+		 */
+		outp32(ebi2_lcd_cfg0, mfd->panel_info.wait_cycle);
+		if (mfd->panel_info.bpp == 18)
+			outp32(ebi2_lcd_cfg1, 0x01000000);
+		else
+			outp32(ebi2_lcd_cfg1, 0x0);
+	} else {
+#ifdef DEBUG_EBI2_LCD
+		/*
+		 * confliting with QCOM SURF FPGA CS.
+		 * OEM should enable below for their CS mapping
+		 */
+		 outp32(ebi2_base, (inp32(ebi2_base)&(~(EBI2_SECD_LCD_CLR)))
+					|EBI2_SECD_LCD_SEL);
+#endif
+	}
+
+	/*
+	 * map cs (chip select) address
+	 */
+	if (mfd->panel_info.pdest == DISPLAY_1) {
+		mfd->cmd_port = lcd01_base;
+		mfd->data_port =
+		    (void *)((uint32) mfd->cmd_port + EBI2_PRIM_LCD_RS_PIN);
+		mfd->data_port_phys =
+		    (void *)(LCD_PRIM_BASE_PHYS + EBI2_PRIM_LCD_RS_PIN);
+	} else {
+		mfd->cmd_port = lcd01_base;
+		mfd->data_port =
+		    (void *)((uint32) mfd->cmd_port + EBI2_SECD_LCD_RS_PIN);
+		mfd->data_port_phys =
+		    (void *)(LCD_SECD_BASE_PHYS + EBI2_SECD_LCD_RS_PIN);
+	}
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc) {
+		goto ebi2_lcd_probe_err;
+	}
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+      ebi2_lcd_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int ebi2_lcd_remove(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return 0;
+
+	if (mfd->key != MFD_KEY)
+		return 0;
+
+	iounmap(mfd->cmd_port);
+
+	return 0;
+}
+
+static int ebi2_lcd_register_driver(void)
+{
+	return platform_driver_register(&ebi2_lcd_driver);
+}
+
+static int __init ebi2_lcd_driver_init(void)
+{
+	return ebi2_lcd_register_driver();
+}
+
+module_init(ebi2_lcd_driver_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/ebi2_tmd20.c b/drivers/staging/msm/ebi2_tmd20.c
new file mode 100644
index 0000000..d66d039
--- /dev/null
+++ b/drivers/staging/msm/ebi2_tmd20.c
@@ -0,0 +1,1122 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#include <linux/memory.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+/* #define TMD20QVGA_LCD_18BPP */
+#define QVGA_WIDTH        240
+#define QVGA_HEIGHT       320
+
+#ifdef TMD20QVGA_LCD_18BPP
+#define DISP_QVGA_18BPP(x)  ((((x)<<2) & 0x3FC00)|(( (x)<<1)& 0x1FE))
+#define DISP_REG(name)  uint32 register_##name;
+#define OUTPORT(x, y)  outpdw(x, y)
+#define INPORT(x)   inpdw(x)
+#else
+#define DISP_QVGA_18BPP(x)  (x)
+#define DISP_REG(name)  uint16 register_##name;
+#define OUTPORT(x, y)  outpw(x, y)
+#define INPORT(x)   intpw(x)
+#endif
+
+static void *DISP_CMD_PORT;
+static void *DISP_DATA_PORT;
+
+#define DISP_RNTI         0x10
+
+#define DISP_CMD_OUT(cmd) OUTPORT(DISP_CMD_PORT, DISP_QVGA_18BPP(cmd))
+#define DISP_DATA_OUT(data) OUTPORT(DISP_DATA_PORT, data)
+#define DISP_DATA_IN() INPORT(DISP_DATA_PORT)
+
+#if (defined(TMD20QVGA_LCD_18BPP))
+#define DISP_DATA_OUT_16TO18BPP(x) \
+	DISP_DATA_OUT((((x)&0xf800)<<2|((x)&0x80000)>>3) \
+		     | (((x)&0x7e0)<<1) \
+		     | (((x)&0x1F)<<1|((x)&0x10)>>4))
+#else
+#define DISP_DATA_OUT_16TO18BPP(x) \
+	DISP_DATA_OUT(x)
+#endif
+
+#define DISP_WRITE_OUT(addr, data) \
+   register_##addr = DISP_QVGA_18BPP(data); \
+   DISP_CMD_OUT(addr); \
+   DISP_DATA_OUT(register_##addr);
+
+#define DISP_UPDATE_VALUE(addr, bitmask, data) \
+   DISP_WRITE_OUT(##addr, (register_##addr & ~(bitmask)) | (data));
+
+#define DISP_VAL_IF(bitvalue, bitmask) \
+   ((bitvalue) ? (bitmask) : 0)
+
+/* QVGA = 256 x 320 */
+/* actual display is 240 x 320...offset by 0x10 */
+#define DISP_ROW_COL_TO_ADDR(row, col) ((row) * 0x100 + col)
+#define DISP_SET_RECT(ulhc_row, lrhc_row, ulhc_col, lrhc_col) \
+   { \
+   DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, (lrhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, (ulhc_row)); \
+   DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, (lrhc_row)); \
+   DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, (ulhc_col) + tmd20qvga_panel_offset); \
+   DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, (ulhc_row)); \
+   }
+
+#define WAIT_MSEC(msec) mdelay(msec)
+
+/*
+ * TMD QVGA Address
+ */
+/* Display Control */
+#define DISP_START_OSCILLATION_ADDR     0x000
+DISP_REG(DISP_START_OSCILLATION_ADDR)
+#define DISP_DRIVER_OUTPUT_CTL_ADDR     0x001
+    DISP_REG(DISP_DRIVER_OUTPUT_CTL_ADDR)
+#define DISP_LCD_DRIVING_SIG_ADDR     0x002
+    DISP_REG(DISP_LCD_DRIVING_SIG_ADDR)
+#define DISP_ENTRY_MODE_ADDR            0x003
+    DISP_REG(DISP_ENTRY_MODE_ADDR)
+#define DISP_DISPLAY_CTL_1_ADDR         0x007
+    DISP_REG(DISP_DISPLAY_CTL_1_ADDR)
+#define DISP_DISPLAY_CTL_2_ADDR         0x008
+    DISP_REG(DISP_DISPLAY_CTL_2_ADDR)
+
+/* DISPLAY MODE 0x009 partial display not supported */
+#define DISP_POWER_SUPPLY_INTF_ADDR     0x00A
+    DISP_REG(DISP_POWER_SUPPLY_INTF_ADDR)
+
+/* DISPLAY MODE 0x00B xZoom feature is not supported */
+#define DISP_EXT_DISPLAY_CTL_1_ADDR     0x00C
+    DISP_REG(DISP_EXT_DISPLAY_CTL_1_ADDR)
+
+#define DISP_FRAME_CYCLE_CTL_ADDR       0x00D
+    DISP_REG(DISP_FRAME_CYCLE_CTL_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_2_ADDR     0x00E
+    DISP_REG(DISP_EXT_DISPLAY_CTL_2_ADDR)
+
+#define DISP_EXT_DISPLAY_CTL_3_ADDR     0x00F
+    DISP_REG(DISP_EXT_DISPLAY_CTL_3_ADDR)
+
+#define DISP_LTPS_CTL_1_ADDR            0x012
+    DISP_REG(DISP_LTPS_CTL_1_ADDR)
+#define DISP_LTPS_CTL_2_ADDR            0x013
+    DISP_REG(DISP_LTPS_CTL_2_ADDR)
+#define DISP_LTPS_CTL_3_ADDR            0x014
+    DISP_REG(DISP_LTPS_CTL_3_ADDR)
+#define DISP_LTPS_CTL_4_ADDR            0x018
+    DISP_REG(DISP_LTPS_CTL_4_ADDR)
+#define DISP_LTPS_CTL_5_ADDR            0x019
+    DISP_REG(DISP_LTPS_CTL_5_ADDR)
+#define DISP_LTPS_CTL_6_ADDR            0x01A
+    DISP_REG(DISP_LTPS_CTL_6_ADDR)
+#define DISP_AMP_SETTING_ADDR           0x01C
+    DISP_REG(DISP_AMP_SETTING_ADDR)
+#define DISP_MODE_SETTING_ADDR          0x01D
+    DISP_REG(DISP_MODE_SETTING_ADDR)
+#define DISP_POFF_LN_SETTING_ADDR       0x01E
+    DISP_REG(DISP_POFF_LN_SETTING_ADDR)
+/* Power Contol */
+#define DISP_POWER_CTL_1_ADDR           0x100
+    DISP_REG(DISP_POWER_CTL_1_ADDR)
+#define DISP_POWER_CTL_2_ADDR           0x101
+    DISP_REG(DISP_POWER_CTL_2_ADDR)
+#define DISP_POWER_CTL_3_ADDR           0x102
+    DISP_REG(DISP_POWER_CTL_3_ADDR)
+#define DISP_POWER_CTL_4_ADDR           0x103
+    DISP_REG(DISP_POWER_CTL_4_ADDR)
+#define DISP_POWER_CTL_5_ADDR           0x104
+    DISP_REG(DISP_POWER_CTL_5_ADDR)
+#define DISP_POWER_CTL_6_ADDR           0x105
+    DISP_REG(DISP_POWER_CTL_6_ADDR)
+#define DISP_POWER_CTL_7_ADDR           0x106
+    DISP_REG(DISP_POWER_CTL_7_ADDR)
+/* RAM Access */
+#define DISP_RAM_ADDR_SET_1_ADDR        0x200
+    DISP_REG(DISP_RAM_ADDR_SET_1_ADDR)
+#define DISP_RAM_ADDR_SET_2_ADDR        0x201
+    DISP_REG(DISP_RAM_ADDR_SET_2_ADDR)
+#define DISP_CMD_RAMRD                  DISP_CMD_RAMWR
+#define DISP_CMD_RAMWR                  0x202
+    DISP_REG(DISP_CMD_RAMWR)
+#define DISP_RAM_DATA_MASK_1_ADDR       0x203
+    DISP_REG(DISP_RAM_DATA_MASK_1_ADDR)
+#define DISP_RAM_DATA_MASK_2_ADDR       0x204
+    DISP_REG(DISP_RAM_DATA_MASK_2_ADDR)
+/* Gamma Control, Contrast, Gray Scale Setting */
+#define DISP_GAMMA_CONTROL_1_ADDR       0x300
+    DISP_REG(DISP_GAMMA_CONTROL_1_ADDR)
+#define DISP_GAMMA_CONTROL_2_ADDR       0x301
+    DISP_REG(DISP_GAMMA_CONTROL_2_ADDR)
+#define DISP_GAMMA_CONTROL_3_ADDR       0x302
+    DISP_REG(DISP_GAMMA_CONTROL_3_ADDR)
+#define DISP_GAMMA_CONTROL_4_ADDR       0x303
+    DISP_REG(DISP_GAMMA_CONTROL_4_ADDR)
+#define DISP_GAMMA_CONTROL_5_ADDR       0x304
+    DISP_REG(DISP_GAMMA_CONTROL_5_ADDR)
+/* Coordinate Control */
+#define DISP_VERT_SCROLL_CTL_1_ADDR     0x400
+    DISP_REG(DISP_VERT_SCROLL_CTL_1_ADDR)
+#define DISP_VERT_SCROLL_CTL_2_ADDR     0x401
+    DISP_REG(DISP_VERT_SCROLL_CTL_2_ADDR)
+#define DISP_SCREEN_1_DRV_POS_1_ADDR    0x402
+    DISP_REG(DISP_SCREEN_1_DRV_POS_1_ADDR)
+#define DISP_SCREEN_1_DRV_POS_2_ADDR    0x403
+    DISP_REG(DISP_SCREEN_1_DRV_POS_2_ADDR)
+#define DISP_SCREEN_2_DRV_POS_1_ADDR    0x404
+    DISP_REG(DISP_SCREEN_2_DRV_POS_1_ADDR)
+#define DISP_SCREEN_2_DRV_POS_2_ADDR    0x405
+    DISP_REG(DISP_SCREEN_2_DRV_POS_2_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_1_ADDR   0x406
+    DISP_REG(DISP_HORZ_RAM_ADDR_POS_1_ADDR)
+#define DISP_HORZ_RAM_ADDR_POS_2_ADDR   0x407
+    DISP_REG(DISP_HORZ_RAM_ADDR_POS_2_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_1_ADDR   0x408
+    DISP_REG(DISP_VERT_RAM_ADDR_POS_1_ADDR)
+#define DISP_VERT_RAM_ADDR_POS_2_ADDR   0x409
+    DISP_REG(DISP_VERT_RAM_ADDR_POS_2_ADDR)
+#define DISP_TMD_700_ADDR               0x700	/*  0x700 */
+    DISP_REG(DISP_TMD_700_ADDR)
+#define DISP_TMD_015_ADDR               0x015	/*  0x700 */
+    DISP_REG(DISP_TMD_015_ADDR)
+#define DISP_TMD_305_ADDR               0x305	/*  0x700 */
+    DISP_REG(DISP_TMD_305_ADDR)
+
+/*
+ * TMD QVGA Bit Definations
+ */
+
+#define DISP_BIT_IB15              0x8000
+#define DISP_BIT_IB14              0x4000
+#define DISP_BIT_IB13              0x2000
+#define DISP_BIT_IB12              0x1000
+#define DISP_BIT_IB11              0x0800
+#define DISP_BIT_IB10              0x0400
+#define DISP_BIT_IB09              0x0200
+#define DISP_BIT_IB08              0x0100
+#define DISP_BIT_IB07              0x0080
+#define DISP_BIT_IB06              0x0040
+#define DISP_BIT_IB05              0x0020
+#define DISP_BIT_IB04              0x0010
+#define DISP_BIT_IB03              0x0008
+#define DISP_BIT_IB02              0x0004
+#define DISP_BIT_IB01              0x0002
+#define DISP_BIT_IB00              0x0001
+/*
+ * Display Control
+ * DISP_START_OSCILLATION_ADDR     Start Oscillation
+ * DISP_DRIVER_OUTPUT_CTL_ADDR     Driver Output Control
+ */
+#define DISP_BITMASK_SS            DISP_BIT_IB08
+#define DISP_BITMASK_NL5           DISP_BIT_IB05
+#define DISP_BITMASK_NL4           DISP_BIT_IB04
+#define DISP_BITMASK_NL3           DISP_BIT_IB03
+#define DISP_BITMASK_NL2           DISP_BIT_IB02
+#define DISP_BITMASK_NL1           DISP_BIT_IB01
+#define DISP_BITMASK_NL0           DISP_BIT_IB00
+/* DISP_LCD_DRIVING_SIG_ADDR       LCD Driving Signal Setting */
+#define DISP_BITMASK_BC            DISP_BIT_IB09
+/* DISP_ENTRY_MODE_ADDR            Entry Mode */
+#define DISP_BITMASK_TRI           DISP_BIT_IB15
+#define DISP_BITMASK_DFM1          DISP_BIT_IB14
+#define DISP_BITMASK_DFM0          DISP_BIT_IB13
+#define DISP_BITMASK_BGR           DISP_BIT_IB12
+#define DISP_BITMASK_HWM0          DISP_BIT_IB08
+#define DISP_BITMASK_ID1           DISP_BIT_IB05
+#define DISP_BITMASK_ID0           DISP_BIT_IB04
+#define DISP_BITMASK_AM            DISP_BIT_IB03
+/* DISP_DISPLAY_CTL_1_ADDR         Display Control (1) */
+#define DISP_BITMASK_COL1          DISP_BIT_IB15
+#define DISP_BITMASK_COL0          DISP_BIT_IB14
+#define DISP_BITMASK_VLE2          DISP_BIT_IB10
+#define DISP_BITMASK_VLE1          DISP_BIT_IB09
+#define DISP_BITMASK_SPT           DISP_BIT_IB08
+#define DISP_BITMASK_PT1           DISP_BIT_IB07
+#define DISP_BITMASK_PT0           DISP_BIT_IB06
+#define DISP_BITMASK_REV           DISP_BIT_IB02
+/* DISP_DISPLAY_CTL_2_ADDR         Display Control (2) */
+#define DISP_BITMASK_FP3           DISP_BIT_IB11
+#define DISP_BITMASK_FP2           DISP_BIT_IB10
+#define DISP_BITMASK_FP1           DISP_BIT_IB09
+#define DISP_BITMASK_FP0           DISP_BIT_IB08
+#define DISP_BITMASK_BP3           DISP_BIT_IB03
+#define DISP_BITMASK_BP2           DISP_BIT_IB02
+#define DISP_BITMASK_BP1           DISP_BIT_IB01
+#define DISP_BITMASK_BP0           DISP_BIT_IB00
+/* DISP_POWER_SUPPLY_INTF_ADDR     Power Supply IC Interface Control */
+#define DISP_BITMASK_CSE           DISP_BIT_IB12
+#define DISP_BITMASK_TE            DISP_BIT_IB08
+#define DISP_BITMASK_IX3           DISP_BIT_IB03
+#define DISP_BITMASK_IX2           DISP_BIT_IB02
+#define DISP_BITMASK_IX1           DISP_BIT_IB01
+#define DISP_BITMASK_IX0           DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_1_ADDR     External Display Interface Control (1) */
+#define DISP_BITMASK_RM            DISP_BIT_IB08
+#define DISP_BITMASK_DM1           DISP_BIT_IB05
+#define DISP_BITMASK_DM0           DISP_BIT_IB04
+#define DISP_BITMASK_RIM1          DISP_BIT_IB01
+#define DISP_BITMASK_RIM0          DISP_BIT_IB00
+/* DISP_FRAME_CYCLE_CTL_ADDR       Frame Frequency Adjustment Control */
+#define DISP_BITMASK_DIVI1         DISP_BIT_IB09
+#define DISP_BITMASK_DIVI0         DISP_BIT_IB08
+#define DISP_BITMASK_RTNI4         DISP_BIT_IB04
+#define DISP_BITMASK_RTNI3         DISP_BIT_IB03
+#define DISP_BITMASK_RTNI2         DISP_BIT_IB02
+#define DISP_BITMASK_RTNI1         DISP_BIT_IB01
+#define DISP_BITMASK_RTNI0         DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_2_ADDR     External Display Interface Control (2) */
+#define DISP_BITMASK_DIVE1         DISP_BIT_IB09
+#define DISP_BITMASK_DIVE0         DISP_BIT_IB08
+#define DISP_BITMASK_RTNE7         DISP_BIT_IB07
+#define DISP_BITMASK_RTNE6         DISP_BIT_IB06
+#define DISP_BITMASK_RTNE5         DISP_BIT_IB05
+#define DISP_BITMASK_RTNE4         DISP_BIT_IB04
+#define DISP_BITMASK_RTNE3         DISP_BIT_IB03
+#define DISP_BITMASK_RTNE2         DISP_BIT_IB02
+#define DISP_BITMASK_RTNE1         DISP_BIT_IB01
+#define DISP_BITMASK_RTNE0         DISP_BIT_IB00
+/* DISP_EXT_DISPLAY_CTL_3_ADDR     External Display Interface Control (3) */
+#define DISP_BITMASK_VSPL          DISP_BIT_IB04
+#define DISP_BITMASK_HSPL          DISP_BIT_IB03
+#define DISP_BITMASK_VPL           DISP_BIT_IB02
+#define DISP_BITMASK_EPL           DISP_BIT_IB01
+#define DISP_BITMASK_DPL           DISP_BIT_IB00
+/* DISP_LTPS_CTL_1_ADDR            LTPS Interface Control (1) */
+#define DISP_BITMASK_CLWI3         DISP_BIT_IB11
+#define DISP_BITMASK_CLWI2         DISP_BIT_IB10
+#define DISP_BITMASK_CLWI1         DISP_BIT_IB09
+#define DISP_BITMASK_CLWI0         DISP_BIT_IB08
+#define DISP_BITMASK_CLTI1         DISP_BIT_IB01
+#define DISP_BITMASK_CLTI0         DISP_BIT_IB00
+/* DISP_LTPS_CTL_2_ADDR            LTPS Interface Control (2) */
+#define DISP_BITMASK_OEVBI1        DISP_BIT_IB09
+#define DISP_BITMASK_OEVBI0        DISP_BIT_IB08
+#define DISP_BITMASK_OEVFI1        DISP_BIT_IB01
+#define DISP_BITMASK_OEVFI0        DISP_BIT_IB00
+/* DISP_LTPS_CTL_3_ADDR            LTPS Interface Control (3) */
+#define DISP_BITMASK_SHI1          DISP_BIT_IB01
+#define DISP_BITMASK_SHI0          DISP_BIT_IB00
+/* DISP_LTPS_CTL_4_ADDR            LTPS Interface Control (4) */
+#define DISP_BITMASK_CLWE5         DISP_BIT_IB13
+#define DISP_BITMASK_CLWE4         DISP_BIT_IB12
+#define DISP_BITMASK_CLWE3         DISP_BIT_IB11
+#define DISP_BITMASK_CLWE2         DISP_BIT_IB10
+#define DISP_BITMASK_CLWE1         DISP_BIT_IB09
+#define DISP_BITMASK_CLWE0         DISP_BIT_IB08
+#define DISP_BITMASK_CLTE3         DISP_BIT_IB03
+#define DISP_BITMASK_CLTE2         DISP_BIT_IB02
+#define DISP_BITMASK_CLTE1         DISP_BIT_IB01
+#define DISP_BITMASK_CLTE0         DISP_BIT_IB00
+/* DISP_LTPS_CTL_5_ADDR            LTPS Interface Control (5) */
+#define DISP_BITMASK_OEVBE3        DISP_BIT_IB11
+#define DISP_BITMASK_OEVBE2        DISP_BIT_IB10
+#define DISP_BITMASK_OEVBE1        DISP_BIT_IB09
+#define DISP_BITMASK_OEVBE0        DISP_BIT_IB08
+#define DISP_BITMASK_OEVFE3        DISP_BIT_IB03
+#define DISP_BITMASK_OEVFE2        DISP_BIT_IB02
+#define DISP_BITMASK_OEVFE1        DISP_BIT_IB01
+#define DISP_BITMASK_OEVFE0        DISP_BIT_IB00
+/* DISP_LTPS_CTL_6_ADDR            LTPS Interface Control (6) */
+#define DISP_BITMASK_SHE3          DISP_BIT_IB03
+#define DISP_BITMASK_SHE2          DISP_BIT_IB02
+#define DISP_BITMASK_SHE1          DISP_BIT_IB01
+#define DISP_BITMASK_SHE0          DISP_BIT_IB00
+/* DISP_AMP_SETTING_ADDR           Amplify Setting */
+#define DISP_BITMASK_ABSW1         DISP_BIT_IB01
+#define DISP_BITMASK_ABSW0         DISP_BIT_IB00
+/* DISP_MODE_SETTING_ADDR          Mode Setting */
+#define DISP_BITMASK_DSTB          DISP_BIT_IB02
+#define DISP_BITMASK_STB           DISP_BIT_IB00
+/* DISP_POFF_LN_SETTING_ADDR       Power Off Line Setting */
+#define DISP_BITMASK_POFH3         DISP_BIT_IB03
+#define DISP_BITMASK_POFH2         DISP_BIT_IB02
+#define DISP_BITMASK_POFH1         DISP_BIT_IB01
+#define DISP_BITMASK_POFH0         DISP_BIT_IB00
+
+/* Power Contol */
+/* DISP_POWER_CTL_1_ADDR           Power Control (1) */
+#define DISP_BITMASK_PO            DISP_BIT_IB11
+#define DISP_BITMASK_VCD           DISP_BIT_IB09
+#define DISP_BITMASK_VSC           DISP_BIT_IB08
+#define DISP_BITMASK_CON           DISP_BIT_IB07
+#define DISP_BITMASK_ASW1          DISP_BIT_IB06
+#define DISP_BITMASK_ASW0          DISP_BIT_IB05
+#define DISP_BITMASK_OEV           DISP_BIT_IB04
+#define DISP_BITMASK_OEVE          DISP_BIT_IB03
+#define DISP_BITMASK_FR            DISP_BIT_IB02
+#define DISP_BITMASK_D1            DISP_BIT_IB01
+#define DISP_BITMASK_D0            DISP_BIT_IB00
+/* DISP_POWER_CTL_2_ADDR           Power Control (2) */
+#define DISP_BITMASK_DC4           DISP_BIT_IB15
+#define DISP_BITMASK_DC3           DISP_BIT_IB14
+#define DISP_BITMASK_SAP2          DISP_BIT_IB13
+#define DISP_BITMASK_SAP1          DISP_BIT_IB12
+#define DISP_BITMASK_SAP0          DISP_BIT_IB11
+#define DISP_BITMASK_BT2           DISP_BIT_IB10
+#define DISP_BITMASK_BT1           DISP_BIT_IB09
+#define DISP_BITMASK_BT0           DISP_BIT_IB08
+#define DISP_BITMASK_DC2           DISP_BIT_IB07
+#define DISP_BITMASK_DC1           DISP_BIT_IB06
+#define DISP_BITMASK_DC0           DISP_BIT_IB05
+#define DISP_BITMASK_AP2           DISP_BIT_IB04
+#define DISP_BITMASK_AP1           DISP_BIT_IB03
+#define DISP_BITMASK_AP0           DISP_BIT_IB02
+/* DISP_POWER_CTL_3_ADDR           Power Control (3) */
+#define DISP_BITMASK_VGL4          DISP_BIT_IB10
+#define DISP_BITMASK_VGL3          DISP_BIT_IB09
+#define DISP_BITMASK_VGL2          DISP_BIT_IB08
+#define DISP_BITMASK_VGL1          DISP_BIT_IB07
+#define DISP_BITMASK_VGL0          DISP_BIT_IB06
+#define DISP_BITMASK_VGH4          DISP_BIT_IB04
+#define DISP_BITMASK_VGH3          DISP_BIT_IB03
+#define DISP_BITMASK_VGH2          DISP_BIT_IB02
+#define DISP_BITMASK_VGH1          DISP_BIT_IB01
+#define DISP_BITMASK_VGH0          DISP_BIT_IB00
+/* DISP_POWER_CTL_4_ADDR           Power Control (4) */
+#define DISP_BITMASK_VC2           DISP_BIT_IB02
+#define DISP_BITMASK_VC1           DISP_BIT_IB01
+#define DISP_BITMASK_VC0           DISP_BIT_IB00
+/* DISP_POWER_CTL_5_ADDR           Power Control (5) */
+#define DISP_BITMASK_VRL3          DISP_BIT_IB11
+#define DISP_BITMASK_VRL2          DISP_BIT_IB10
+#define DISP_BITMASK_VRL1          DISP_BIT_IB09
+#define DISP_BITMASK_VRL0          DISP_BIT_IB08
+#define DISP_BITMASK_PON           DISP_BIT_IB04
+#define DISP_BITMASK_VRH3          DISP_BIT_IB03
+#define DISP_BITMASK_VRH2          DISP_BIT_IB02
+#define DISP_BITMASK_VRH1          DISP_BIT_IB01
+#define DISP_BITMASK_VRH0          DISP_BIT_IB00
+/* DISP_POWER_CTL_6_ADDR           Power Control (6) */
+#define DISP_BITMASK_VCOMG         DISP_BIT_IB13
+#define DISP_BITMASK_VDV4          DISP_BIT_IB12
+#define DISP_BITMASK_VDV3          DISP_BIT_IB11
+#define DISP_BITMASK_VDV2          DISP_BIT_IB10
+#define DISP_BITMASK_VDV1          DISP_BIT_IB09
+#define DISP_BITMASK_VDV0          DISP_BIT_IB08
+#define DISP_BITMASK_VCM4          DISP_BIT_IB04
+#define DISP_BITMASK_VCM3          DISP_BIT_IB03
+#define DISP_BITMASK_VCM2          DISP_BIT_IB02
+#define DISP_BITMASK_VCM1          DISP_BIT_IB01
+#define DISP_BITMASK_VCM0          DISP_BIT_IB00
+/* RAM Access */
+/* DISP_RAM_ADDR_SET_1_ADDR        RAM Address Set (1) */
+#define DISP_BITMASK_AD7           DISP_BIT_IB07
+#define DISP_BITMASK_AD6           DISP_BIT_IB06
+#define DISP_BITMASK_AD5           DISP_BIT_IB05
+#define DISP_BITMASK_AD4           DISP_BIT_IB04
+#define DISP_BITMASK_AD3           DISP_BIT_IB03
+#define DISP_BITMASK_AD2           DISP_BIT_IB02
+#define DISP_BITMASK_AD1           DISP_BIT_IB01
+#define DISP_BITMASK_AD0           DISP_BIT_IB00
+/* DISP_RAM_ADDR_SET_2_ADDR        RAM Address Set (2) */
+#define DISP_BITMASK_AD16          DISP_BIT_IB08
+#define DISP_BITMASK_AD15          DISP_BIT_IB07
+#define DISP_BITMASK_AD14          DISP_BIT_IB06
+#define DISP_BITMASK_AD13          DISP_BIT_IB05
+#define DISP_BITMASK_AD12          DISP_BIT_IB04
+#define DISP_BITMASK_AD11          DISP_BIT_IB03
+#define DISP_BITMASK_AD10          DISP_BIT_IB02
+#define DISP_BITMASK_AD9           DISP_BIT_IB01
+#define DISP_BITMASK_AD8           DISP_BIT_IB00
+/*
+ * DISP_CMD_RAMWR       RAM Data Read/Write
+ * Use Data Bit Configuration
+ */
+/* DISP_RAM_DATA_MASK_1_ADDR       RAM Write Data Mask (1) */
+#define DISP_BITMASK_WM11          DISP_BIT_IB13
+#define DISP_BITMASK_WM10          DISP_BIT_IB12
+#define DISP_BITMASK_WM9           DISP_BIT_IB11
+#define DISP_BITMASK_WM8           DISP_BIT_IB10
+#define DISP_BITMASK_WM7           DISP_BIT_IB09
+#define DISP_BITMASK_WM6           DISP_BIT_IB08
+#define DISP_BITMASK_WM5           DISP_BIT_IB05
+#define DISP_BITMASK_WM4           DISP_BIT_IB04
+#define DISP_BITMASK_WM3           DISP_BIT_IB03
+#define DISP_BITMASK_WM2           DISP_BIT_IB02
+#define DISP_BITMASK_WM1           DISP_BIT_IB01
+#define DISP_BITMASK_WM0           DISP_BIT_IB00
+/* DISP_RAM_DATA_MASK_2_ADDR       RAM Write Data Mask (2) */
+#define DISP_BITMASK_WM17          DISP_BIT_IB05
+#define DISP_BITMASK_WM16          DISP_BIT_IB04
+#define DISP_BITMASK_WM15          DISP_BIT_IB03
+#define DISP_BITMASK_WM14          DISP_BIT_IB02
+#define DISP_BITMASK_WM13          DISP_BIT_IB01
+#define DISP_BITMASK_WM12          DISP_BIT_IB00
+/*Gamma Control */
+/* DISP_GAMMA_CONTROL_1_ADDR       Gamma Control (1) */
+#define DISP_BITMASK_PKP12         DISP_BIT_IB10
+#define DISP_BITMASK_PKP11         DISP_BIT_IB08
+#define DISP_BITMASK_PKP10         DISP_BIT_IB09
+#define DISP_BITMASK_PKP02         DISP_BIT_IB02
+#define DISP_BITMASK_PKP01         DISP_BIT_IB01
+#define DISP_BITMASK_PKP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_2_ADDR       Gamma Control (2) */
+#define DISP_BITMASK_PKP32         DISP_BIT_IB10
+#define DISP_BITMASK_PKP31         DISP_BIT_IB09
+#define DISP_BITMASK_PKP30         DISP_BIT_IB08
+#define DISP_BITMASK_PKP22         DISP_BIT_IB02
+#define DISP_BITMASK_PKP21         DISP_BIT_IB01
+#define DISP_BITMASK_PKP20         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_3_ADDR       Gamma Control (3) */
+#define DISP_BITMASK_PKP52         DISP_BIT_IB10
+#define DISP_BITMASK_PKP51         DISP_BIT_IB09
+#define DISP_BITMASK_PKP50         DISP_BIT_IB08
+#define DISP_BITMASK_PKP42         DISP_BIT_IB02
+#define DISP_BITMASK_PKP41         DISP_BIT_IB01
+#define DISP_BITMASK_PKP40         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_4_ADDR       Gamma Control (4) */
+#define DISP_BITMASK_PRP12         DISP_BIT_IB10
+#define DISP_BITMASK_PRP11         DISP_BIT_IB08
+#define DISP_BITMASK_PRP10         DISP_BIT_IB09
+#define DISP_BITMASK_PRP02         DISP_BIT_IB02
+#define DISP_BITMASK_PRP01         DISP_BIT_IB01
+#define DISP_BITMASK_PRP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_5_ADDR       Gamma Control (5) */
+#define DISP_BITMASK_VRP14         DISP_BIT_IB12
+#define DISP_BITMASK_VRP13         DISP_BIT_IB11
+#define DISP_BITMASK_VRP12         DISP_BIT_IB10
+#define DISP_BITMASK_VRP11         DISP_BIT_IB08
+#define DISP_BITMASK_VRP10         DISP_BIT_IB09
+#define DISP_BITMASK_VRP03         DISP_BIT_IB03
+#define DISP_BITMASK_VRP02         DISP_BIT_IB02
+#define DISP_BITMASK_VRP01         DISP_BIT_IB01
+#define DISP_BITMASK_VRP00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_6_ADDR       Gamma Control (6) */
+#define DISP_BITMASK_PKN12         DISP_BIT_IB10
+#define DISP_BITMASK_PKN11         DISP_BIT_IB08
+#define DISP_BITMASK_PKN10         DISP_BIT_IB09
+#define DISP_BITMASK_PKN02         DISP_BIT_IB02
+#define DISP_BITMASK_PKN01         DISP_BIT_IB01
+#define DISP_BITMASK_PKN00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_7_ADDR       Gamma Control (7) */
+#define DISP_BITMASK_PKN32         DISP_BIT_IB10
+#define DISP_BITMASK_PKN31         DISP_BIT_IB08
+#define DISP_BITMASK_PKN30         DISP_BIT_IB09
+#define DISP_BITMASK_PKN22         DISP_BIT_IB02
+#define DISP_BITMASK_PKN21         DISP_BIT_IB01
+#define DISP_BITMASK_PKN20         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_8_ADDR       Gamma Control (8) */
+#define DISP_BITMASK_PKN52         DISP_BIT_IB10
+#define DISP_BITMASK_PKN51         DISP_BIT_IB08
+#define DISP_BITMASK_PKN50         DISP_BIT_IB09
+#define DISP_BITMASK_PKN42         DISP_BIT_IB02
+#define DISP_BITMASK_PKN41         DISP_BIT_IB01
+#define DISP_BITMASK_PKN40         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_9_ADDR       Gamma Control (9) */
+#define DISP_BITMASK_PRN12         DISP_BIT_IB10
+#define DISP_BITMASK_PRN11         DISP_BIT_IB08
+#define DISP_BITMASK_PRN10         DISP_BIT_IB09
+#define DISP_BITMASK_PRN02         DISP_BIT_IB02
+#define DISP_BITMASK_PRN01         DISP_BIT_IB01
+#define DISP_BITMASK_PRN00         DISP_BIT_IB00
+/* DISP_GAMMA_CONTROL_10_ADDR      Gamma Control (10) */
+#define DISP_BITMASK_VRN14         DISP_BIT_IB12
+#define DISP_BITMASK_VRN13         DISP_BIT_IB11
+#define DISP_BITMASK_VRN12         DISP_BIT_IB10
+#define DISP_BITMASK_VRN11         DISP_BIT_IB08
+#define DISP_BITMASK_VRN10         DISP_BIT_IB09
+#define DISP_BITMASK_VRN03         DISP_BIT_IB03
+#define DISP_BITMASK_VRN02         DISP_BIT_IB02
+#define DISP_BITMASK_VRN01         DISP_BIT_IB01
+#define DISP_BITMASK_VRN00         DISP_BIT_IB00
+/* Coordinate Control */
+/* DISP_VERT_SCROLL_CTL_1_ADDR     Vertical Scroll Control (1) */
+#define DISP_BITMASK_VL18          DISP_BIT_IB08
+#define DISP_BITMASK_VL17          DISP_BIT_IB07
+#define DISP_BITMASK_VL16          DISP_BIT_IB06
+#define DISP_BITMASK_VL15          DISP_BIT_IB05
+#define DISP_BITMASK_VL14          DISP_BIT_IB04
+#define DISP_BITMASK_VL13          DISP_BIT_IB03
+#define DISP_BITMASK_VL12          DISP_BIT_IB02
+#define DISP_BITMASK_VL11          DISP_BIT_IB01
+#define DISP_BITMASK_VL10          DISP_BIT_IB00
+/* DISP_VERT_SCROLL_CTL_2_ADDR     Vertical Scroll Control (2) */
+#define DISP_BITMASK_VL28          DISP_BIT_IB08
+#define DISP_BITMASK_VL27          DISP_BIT_IB07
+#define DISP_BITMASK_VL26          DISP_BIT_IB06
+#define DISP_BITMASK_VL25          DISP_BIT_IB05
+#define DISP_BITMASK_VL24          DISP_BIT_IB04
+#define DISP_BITMASK_VL23          DISP_BIT_IB03
+#define DISP_BITMASK_VL22          DISP_BIT_IB02
+#define DISP_BITMASK_VL21          DISP_BIT_IB01
+#define DISP_BITMASK_VL20          DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_1_ADDR    First Screen Driving Position (1) */
+#define DISP_BITMASK_SS18          DISP_BIT_IB08
+#define DISP_BITMASK_SS17          DISP_BIT_IB07
+#define DISP_BITMASK_SS16          DISP_BIT_IB06
+#define DISP_BITMASK_SS15          DISP_BIT_IB05
+#define DISP_BITMASK_SS14          DISP_BIT_IB04
+#define DISP_BITMASK_SS13          DISP_BIT_IB03
+#define DISP_BITMASK_SS12          DISP_BIT_IB02
+#define DISP_BITMASK_SS11          DISP_BIT_IB01
+#define DISP_BITMASK_SS10          DISP_BIT_IB00
+/* DISP_SCREEN_1_DRV_POS_2_ADDR    First Screen Driving Position (2) */
+#define DISP_BITMASK_SE18          DISP_BIT_IB08
+#define DISP_BITMASK_SE17          DISP_BIT_IB07
+#define DISP_BITMASK_SE16          DISP_BIT_IB06
+#define DISP_BITMASK_SE15          DISP_BIT_IB05
+#define DISP_BITMASK_SE14          DISP_BIT_IB04
+#define DISP_BITMASK_SE13          DISP_BIT_IB03
+#define DISP_BITMASK_SE12          DISP_BIT_IB02
+#define DISP_BITMASK_SE11          DISP_BIT_IB01
+#define DISP_BITMASK_SE10          DISP_BIT_IB00
+/* DISP_SCREEN_2_DRV_POS_1_ADDR    Second Screen Driving Position (1) */
+#define DISP_BITMASK_SS28          DISP_BIT_IB08
+#define DISP_BITMASK_SS27          DISP_BIT_IB07
+#define DISP_BITMASK_SS26          DISP_BIT_IB06
+#define DISP_BITMASK_SS25          DISP_BIT_IB05
+#define DISP_BITMASK_SS24          DISP_BIT_IB04
+#define DISP_BITMASK_SS23          DISP_BIT_IB03
+#define DISP_BITMASK_SS22          DISP_BIT_IB02
+#define DISP_BITMASK_SS21          DISP_BIT_IB01
+#define DISP_BITMASK_SS20          DISP_BIT_IB00
+/* DISP_SCREEN_3_DRV_POS_2_ADDR    Second Screen Driving Position (2) */
+#define DISP_BITMASK_SE28          DISP_BIT_IB08
+#define DISP_BITMASK_SE27          DISP_BIT_IB07
+#define DISP_BITMASK_SE26          DISP_BIT_IB06
+#define DISP_BITMASK_SE25          DISP_BIT_IB05
+#define DISP_BITMASK_SE24          DISP_BIT_IB04
+#define DISP_BITMASK_SE23          DISP_BIT_IB03
+#define DISP_BITMASK_SE22          DISP_BIT_IB02
+#define DISP_BITMASK_SE21          DISP_BIT_IB01
+#define DISP_BITMASK_SE20          DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_1_ADDR   Horizontal RAM Address Position (1) */
+#define DISP_BITMASK_HSA7          DISP_BIT_IB07
+#define DISP_BITMASK_HSA6          DISP_BIT_IB06
+#define DISP_BITMASK_HSA5          DISP_BIT_IB05
+#define DISP_BITMASK_HSA4          DISP_BIT_IB04
+#define DISP_BITMASK_HSA3          DISP_BIT_IB03
+#define DISP_BITMASK_HSA2          DISP_BIT_IB02
+#define DISP_BITMASK_HSA1          DISP_BIT_IB01
+#define DISP_BITMASK_HSA0          DISP_BIT_IB00
+/* DISP_HORZ_RAM_ADDR_POS_2_ADDR   Horizontal RAM Address Position (2) */
+#define DISP_BITMASK_HEA7          DISP_BIT_IB07
+#define DISP_BITMASK_HEA6          DISP_BIT_IB06
+#define DISP_BITMASK_HEA5          DISP_BIT_IB05
+#define DISP_BITMASK_HEA4          DISP_BIT_IB04
+#define DISP_BITMASK_HEA3          DISP_BIT_IB03
+#define DISP_BITMASK_HEA2          DISP_BIT_IB02
+#define DISP_BITMASK_HEA1          DISP_BIT_IB01
+#define DISP_BITMASK_HEA0          DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_1_ADDR   Vertical RAM Address Position (1) */
+#define DISP_BITMASK_VSA8          DISP_BIT_IB08
+#define DISP_BITMASK_VSA7          DISP_BIT_IB07
+#define DISP_BITMASK_VSA6          DISP_BIT_IB06
+#define DISP_BITMASK_VSA5          DISP_BIT_IB05
+#define DISP_BITMASK_VSA4          DISP_BIT_IB04
+#define DISP_BITMASK_VSA3          DISP_BIT_IB03
+#define DISP_BITMASK_VSA2          DISP_BIT_IB02
+#define DISP_BITMASK_VSA1          DISP_BIT_IB01
+#define DISP_BITMASK_VSA0          DISP_BIT_IB00
+/* DISP_VERT_RAM_ADDR_POS_2_ADDR   Vertical RAM Address Position (2) */
+#define DISP_BITMASK_VEA8          DISP_BIT_IB08
+#define DISP_BITMASK_VEA7          DISP_BIT_IB07
+#define DISP_BITMASK_VEA6          DISP_BIT_IB06
+#define DISP_BITMASK_VEA5          DISP_BIT_IB05
+#define DISP_BITMASK_VEA4          DISP_BIT_IB04
+#define DISP_BITMASK_VEA3          DISP_BIT_IB03
+#define DISP_BITMASK_VEA2          DISP_BIT_IB02
+#define DISP_BITMASK_VEA1          DISP_BIT_IB01
+#define DISP_BITMASK_VEA0          DISP_BIT_IB00
+static word disp_area_start_row;
+static word disp_area_end_row;
+static boolean disp_initialized = FALSE;
+/* For some reason the contrast set at init time is not good. Need to do
+* it again
+*/
+static boolean display_on = FALSE;
+
+static uint32 tmd20qvga_lcd_rev;
+uint16 tmd20qvga_panel_offset;
+
+#ifdef DISP_DEVICE_8BPP
+static word convert_8_to_16_tbl[256] = {
+	0x0000, 0x2000, 0x4000, 0x6000, 0x8000, 0xA000, 0xC000, 0xE000,
+	0x0100, 0x2100, 0x4100, 0x6100, 0x8100, 0xA100, 0xC100, 0xE100,
+	0x0200, 0x2200, 0x4200, 0x6200, 0x8200, 0xA200, 0xC200, 0xE200,
+	0x0300, 0x2300, 0x4300, 0x6300, 0x8300, 0xA300, 0xC300, 0xE300,
+	0x0400, 0x2400, 0x4400, 0x6400, 0x8400, 0xA400, 0xC400, 0xE400,
+	0x0500, 0x2500, 0x4500, 0x6500, 0x8500, 0xA500, 0xC500, 0xE500,
+	0x0600, 0x2600, 0x4600, 0x6600, 0x8600, 0xA600, 0xC600, 0xE600,
+	0x0700, 0x2700, 0x4700, 0x6700, 0x8700, 0xA700, 0xC700, 0xE700,
+	0x0008, 0x2008, 0x4008, 0x6008, 0x8008, 0xA008, 0xC008, 0xE008,
+	0x0108, 0x2108, 0x4108, 0x6108, 0x8108, 0xA108, 0xC108, 0xE108,
+	0x0208, 0x2208, 0x4208, 0x6208, 0x8208, 0xA208, 0xC208, 0xE208,
+	0x0308, 0x2308, 0x4308, 0x6308, 0x8308, 0xA308, 0xC308, 0xE308,
+	0x0408, 0x2408, 0x4408, 0x6408, 0x8408, 0xA408, 0xC408, 0xE408,
+	0x0508, 0x2508, 0x4508, 0x6508, 0x8508, 0xA508, 0xC508, 0xE508,
+	0x0608, 0x2608, 0x4608, 0x6608, 0x8608, 0xA608, 0xC608, 0xE608,
+	0x0708, 0x2708, 0x4708, 0x6708, 0x8708, 0xA708, 0xC708, 0xE708,
+	0x0010, 0x2010, 0x4010, 0x6010, 0x8010, 0xA010, 0xC010, 0xE010,
+	0x0110, 0x2110, 0x4110, 0x6110, 0x8110, 0xA110, 0xC110, 0xE110,
+	0x0210, 0x2210, 0x4210, 0x6210, 0x8210, 0xA210, 0xC210, 0xE210,
+	0x0310, 0x2310, 0x4310, 0x6310, 0x8310, 0xA310, 0xC310, 0xE310,
+	0x0410, 0x2410, 0x4410, 0x6410, 0x8410, 0xA410, 0xC410, 0xE410,
+	0x0510, 0x2510, 0x4510, 0x6510, 0x8510, 0xA510, 0xC510, 0xE510,
+	0x0610, 0x2610, 0x4610, 0x6610, 0x8610, 0xA610, 0xC610, 0xE610,
+	0x0710, 0x2710, 0x4710, 0x6710, 0x8710, 0xA710, 0xC710, 0xE710,
+	0x0018, 0x2018, 0x4018, 0x6018, 0x8018, 0xA018, 0xC018, 0xE018,
+	0x0118, 0x2118, 0x4118, 0x6118, 0x8118, 0xA118, 0xC118, 0xE118,
+	0x0218, 0x2218, 0x4218, 0x6218, 0x8218, 0xA218, 0xC218, 0xE218,
+	0x0318, 0x2318, 0x4318, 0x6318, 0x8318, 0xA318, 0xC318, 0xE318,
+	0x0418, 0x2418, 0x4418, 0x6418, 0x8418, 0xA418, 0xC418, 0xE418,
+	0x0518, 0x2518, 0x4518, 0x6518, 0x8518, 0xA518, 0xC518, 0xE518,
+	0x0618, 0x2618, 0x4618, 0x6618, 0x8618, 0xA618, 0xC618, 0xE618,
+	0x0718, 0x2718, 0x4718, 0x6718, 0x8718, 0xA718, 0xC718, 0xE718
+};
+#endif /* DISP_DEVICE_8BPP */
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres);
+static void tmd20qvga_disp_init(struct platform_device *pdev);
+static void tmd20qvga_disp_set_contrast(void);
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row);
+static int tmd20qvga_disp_off(struct platform_device *pdev);
+static int tmd20qvga_disp_on(struct platform_device *pdev);
+static void tmd20qvga_set_revId(int);
+
+/* future use */
+void tmd20qvga_disp_clear_screen_area(word start_row, word end_row,
+				      word start_column, word end_column);
+
+static void tmd20qvga_set_revId(int id)
+{
+
+	tmd20qvga_lcd_rev = id;
+
+	if (tmd20qvga_lcd_rev == 1)
+		tmd20qvga_panel_offset = 0x10;
+	else
+		tmd20qvga_panel_offset = 0;
+}
+
+static void tmd20qvga_disp_init(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	if (disp_initialized)
+		return;
+
+	mfd = platform_get_drvdata(pdev);
+
+	DISP_CMD_PORT = mfd->cmd_port;
+	DISP_DATA_PORT = mfd->data_port;
+
+#ifdef TMD20QVGA_LCD_18BPP
+	tmd20qvga_set_revId(2);
+#else
+	tmd20qvga_set_revId(1);
+#endif
+
+	disp_initialized = TRUE;
+	tmd20qvga_disp_set_contrast();
+	tmd20qvga_disp_set_display_area(0, QVGA_HEIGHT - 1);
+}
+
+static void tmd20qvga_disp_set_rect(int x, int y, int xres, int yres)
+{
+	if (!disp_initialized)
+		return;
+
+	DISP_SET_RECT(y, y + yres - 1, x, x + xres - 1);
+
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+}
+
+static void tmd20qvga_disp_set_display_area(word start_row, word end_row)
+{
+	word start_driving = start_row;
+	word end_driving = end_row;
+
+	if (!disp_initialized)
+		return;
+
+	/* Range checking
+	 */
+	if (end_driving >= QVGA_HEIGHT)
+		end_driving = QVGA_HEIGHT - 1;
+	if (start_driving > end_driving) {
+		/* Probably Backwards Switch */
+		start_driving = end_driving;
+		end_driving = start_row;	/* Has not changed */
+		if (end_driving >= QVGA_HEIGHT)
+			end_driving = QVGA_HEIGHT - 1;
+	}
+
+	if ((start_driving == disp_area_start_row)
+	    && (end_driving == disp_area_end_row))
+		return;
+
+	disp_area_start_row = start_driving;
+	disp_area_end_row = end_driving;
+
+	DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR,
+		       DISP_VAL_IF(start_driving & 0x100,
+				   DISP_BITMASK_SS18) |
+		       DISP_VAL_IF(start_driving & 0x080,
+				   DISP_BITMASK_SS17) |
+		       DISP_VAL_IF(start_driving & 0x040,
+				   DISP_BITMASK_SS16) |
+		       DISP_VAL_IF(start_driving & 0x020,
+				   DISP_BITMASK_SS15) |
+		       DISP_VAL_IF(start_driving & 0x010,
+				   DISP_BITMASK_SS14) |
+		       DISP_VAL_IF(start_driving & 0x008,
+				   DISP_BITMASK_SS13) |
+		       DISP_VAL_IF(start_driving & 0x004,
+				   DISP_BITMASK_SS12) |
+		       DISP_VAL_IF(start_driving & 0x002,
+				   DISP_BITMASK_SS11) |
+		       DISP_VAL_IF(start_driving & 0x001, DISP_BITMASK_SS10));
+
+	DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR,
+			DISP_VAL_IF(end_driving & 0x100, DISP_BITMASK_SE18) |
+			DISP_VAL_IF(end_driving & 0x080, DISP_BITMASK_SE17) |
+			DISP_VAL_IF(end_driving & 0x040, DISP_BITMASK_SE16) |
+			DISP_VAL_IF(end_driving & 0x020, DISP_BITMASK_SE15) |
+			DISP_VAL_IF(end_driving & 0x010, DISP_BITMASK_SE14) |
+			DISP_VAL_IF(end_driving & 0x008, DISP_BITMASK_SE13) |
+			DISP_VAL_IF(end_driving & 0x004, DISP_BITMASK_SE12) |
+			DISP_VAL_IF(end_driving & 0x002, DISP_BITMASK_SE11) |
+			DISP_VAL_IF(end_driving & 0x001, DISP_BITMASK_SE10));
+}
+
+static int tmd20qvga_disp_off(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		tmd20qvga_disp_init(pdev);
+
+	if (display_on) {
+		if (tmd20qvga_lcd_rev == 2) {
+			DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000A);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFEE);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xF812);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xE811);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC011);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x4011);
+			WAIT_MSEC(20);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0010);
+
+		} else {
+			DISP_WRITE_OUT(DISP_POFF_LN_SETTING_ADDR, 0x000F);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFE);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BED);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x00CD);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(20);
+			DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0);
+		}
+
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0004);
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0000);
+
+		display_on = FALSE;
+	}
+
+	return 0;
+}
+
+static int tmd20qvga_disp_on(struct platform_device *pdev)
+{
+	if (!disp_initialized)
+		tmd20qvga_disp_init(pdev);
+
+	if (!display_on) {
+		/* Deep Stand-by -> Stand-by */
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+		DISP_CMD_OUT(DISP_START_OSCILLATION_ADDR);
+		WAIT_MSEC(1);
+
+		/* OFF -> Deep Stan-By -> Stand-by */
+		/* let's change the state from "Stand-by" to "Sleep" */
+		DISP_WRITE_OUT(DISP_MODE_SETTING_ADDR, 0x0005);
+		WAIT_MSEC(1);
+
+		/* Sleep -> Displaying */
+		DISP_WRITE_OUT(DISP_START_OSCILLATION_ADDR, 0x0001);
+		DISP_WRITE_OUT(DISP_DRIVER_OUTPUT_CTL_ADDR, 0x0127);
+		DISP_WRITE_OUT(DISP_LCD_DRIVING_SIG_ADDR, 0x200);
+		/* fast write mode */
+		DISP_WRITE_OUT(DISP_ENTRY_MODE_ADDR, 0x0130);
+		if (tmd20qvga_lcd_rev == 2)
+			DISP_WRITE_OUT(DISP_TMD_700_ADDR, 0x0003);
+		/* back porch = 14 + front porch = 2 --> 16 lines */
+		if (tmd20qvga_lcd_rev == 2) {
+#ifdef TMD20QVGA_LCD_18BPP
+			/* 256k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0000);
+#else
+			/* 65k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4000);
+#endif
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x0302);
+		} else {
+#ifdef TMD20QVGA_LCD_18BPP
+			/* 256k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x0004);
+#else
+			/* 65k color */
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_1_ADDR, 0x4004);
+#endif
+			DISP_WRITE_OUT(DISP_DISPLAY_CTL_2_ADDR, 0x020E);
+		}
+		/* 16 bit one transfer */
+		if (tmd20qvga_lcd_rev == 2) {
+			DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0302);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0102);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_TMD_015_ADDR, 0x2000);
+
+			DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0304);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0101);
+			DISP_WRITE_OUT(DISP_TMD_305_ADDR, 0);
+
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x077D);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0005);
+			DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0015);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xC010);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0xFFFE);
+			WAIT_MSEC(60);
+		} else {
+			DISP_WRITE_OUT(DISP_EXT_DISPLAY_CTL_1_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_FRAME_CYCLE_CTL_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_1_ADDR, 0x0301);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_2_ADDR, 0x0001);
+			DISP_WRITE_OUT(DISP_LTPS_CTL_3_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_AMP_SETTING_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0507);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0405);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0607);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0502);
+			DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0301);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_SCREEN_1_DRV_POS_2_ADDR, 0x013F);
+			DISP_WRITE_OUT(DISP_POWER_CTL_3_ADDR, 0x0795);
+
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0102);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_4_ADDR, 0x0450);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0103);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_5_ADDR, 0x0008);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0104);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_6_ADDR, 0x0C00);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0105);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_7_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0106);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0801);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(1);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x001F);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+			WAIT_MSEC(60);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_2_ADDR, 0x009F);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0101);
+			WAIT_MSEC(10);
+
+			DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_1_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_HORZ_RAM_ADDR_POS_2_ADDR, 0x00FF);
+			DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_1_ADDR, 0x0000);
+			DISP_WRITE_OUT(DISP_VERT_RAM_ADDR_POS_2_ADDR, 0x013F);
+			/* RAM starts at address 0x10 */
+			DISP_WRITE_OUT(DISP_RAM_ADDR_SET_1_ADDR, 0x0010);
+			DISP_WRITE_OUT(DISP_RAM_ADDR_SET_2_ADDR, 0x0000);
+
+			/* lcd controller uses internal clock, not ext. vsync */
+			DISP_CMD_OUT(DISP_CMD_RAMWR);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0881);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BE1);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+			WAIT_MSEC(40);
+
+			DISP_WRITE_OUT(DISP_POWER_CTL_1_ADDR, 0x0BFF);
+			DISP_WRITE_OUT(DISP_POWER_SUPPLY_INTF_ADDR, 0x0100);
+		}
+		display_on = TRUE;
+	}
+
+	return 0;
+}
+
+static void tmd20qvga_disp_set_contrast(void)
+{
+#if (defined(TMD20QVGA_LCD_18BPP))
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR, 0x0302);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR, 0x0403);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#else
+	int newcontrast = 0x46;
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_1_ADDR, 0x0403);
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_2_ADDR,
+			DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP20) |
+			DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP21) |
+			DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP22) |
+			DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP30) |
+			DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP31) |
+			DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP32));
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_3_ADDR,
+			DISP_VAL_IF(newcontrast & 0x0010, DISP_BITMASK_PKP40) |
+			DISP_VAL_IF(newcontrast & 0x0020, DISP_BITMASK_PKP41) |
+			DISP_VAL_IF(newcontrast & 0x0040, DISP_BITMASK_PKP42) |
+			DISP_VAL_IF(newcontrast & 0x0001, DISP_BITMASK_PKP50) |
+			DISP_VAL_IF(newcontrast & 0x0002, DISP_BITMASK_PKP51) |
+			DISP_VAL_IF(newcontrast & 0x0004, DISP_BITMASK_PKP52));
+
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_4_ADDR, 0x0303);
+	DISP_WRITE_OUT(DISP_GAMMA_CONTROL_5_ADDR, 0x0F07);
+
+#endif /* defined(TMD20QVGA_LCD_18BPP) */
+
+}	/* End disp_set_contrast */
+
+void tmd20qvga_disp_clear_screen_area
+    (word start_row, word end_row, word start_column, word end_column) {
+	int32 i;
+
+	/* Clear the display screen */
+	DISP_SET_RECT(start_row, end_row, start_column, end_column);
+	DISP_CMD_OUT(DISP_CMD_RAMWR);
+	i = (end_row - start_row + 1) * (end_column - start_column + 1);
+	for (; i > 0; i--)
+		DISP_DATA_OUT_16TO18BPP(0x0);
+}
+
+static int __init tmd20qvga_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = tmd20qvga_probe,
+	.driver = {
+		.name   = "ebi2_tmd_qvga",
+	},
+};
+
+static struct msm_fb_panel_data tmd20qvga_panel_data = {
+	.on = tmd20qvga_disp_on,
+	.off = tmd20qvga_disp_off,
+	.set_rect = tmd20qvga_disp_set_rect,
+};
+
+static struct platform_device this_device = {
+	.name   = "ebi2_tmd_qvga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &tmd20qvga_panel_data,
+	}
+};
+
+static int __init tmd20qvga_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &tmd20qvga_panel_data.panel_info;
+		pinfo->xres = 240;
+		pinfo->yres = 320;
+		pinfo->type = EBI2_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->wait_cycle = 0x808000;
+#ifdef TMD20QVGA_LCD_18BPP
+		pinfo->bpp = 18;
+#else
+		pinfo->bpp = 16;
+#endif
+		pinfo->fb_num = 2;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 = 6000;
+		pinfo->lcd.v_back_porch = 16;
+		pinfo->lcd.v_front_porch = 4;
+		pinfo->lcd.v_pulse_width = 0;
+		pinfo->lcd.hw_vsync_mode = FALSE;
+		pinfo->lcd.vsync_notifier_period = 0;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(tmd20qvga_init);
diff --git a/drivers/staging/msm/hdmi_sii9022.c b/drivers/staging/msm/hdmi_sii9022.c
new file mode 100644
index 0000000..6b82b56
--- /dev/null
+++ b/drivers/staging/msm/hdmi_sii9022.c
@@ -0,0 +1,248 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID   0xB0
+
+struct sii9022_i2c_addr_data{
+	u8 addr;
+	u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+	0x00,
+	0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+	0x09,
+	0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+	{ 0x60, 0x04 },
+	{ 0x63, 0x00 },
+	{ 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+	0x0C,
+	0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+	0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+	{ 0x26, 0x90 },
+	{ 0x20, 0x90 },
+	{ 0x1F, 0x80 },
+	{ 0x26, 0x80 },
+	{ 0x24, 0x02 },
+	{ 0x25, 0x0B },
+	{ 0xBC, 0x02 },
+	{ 0xBD, 0x24 },
+	{ 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+	0xBF,
+	0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+	{ 0x1A, 0x01 },
+	{ 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+			 struct sii9022_i2c_addr_data *regset,
+			 int size)
+{
+	int i;
+	int rc = 0;
+
+	for (i = 0; i < size; i++) {
+		rc = i2c_smbus_write_byte_data(
+			client,
+			regset[i].addr, regset[i].data);
+		if (rc)
+			break;
+	}
+	return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+	int rc;
+	int retries = 10;
+	int count;
+
+	rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+	if (rc)
+		goto enable_exit;
+
+	do {
+		msleep(1);
+		rc = i2c_smbus_read_byte_data(client, 0x1B);
+	} while ((rc != SII9022_DEVICE_ID) && retries--);
+
+	if (rc != SII9022_DEVICE_ID)
+		return -ENODEV;
+
+	rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_mode_data);
+	rc = i2c_master_send(client, video_mode_data, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+	if (rc)
+		goto enable_exit;
+	count = ARRAY_SIZE(avi_io_format);
+	rc = i2c_master_send(client, avi_io_format, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_infoframe);
+	rc = i2c_master_send(client, video_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(misc_infoframe);
+	rc = i2c_master_send(client, misc_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+	if (rc)
+		goto enable_exit;
+
+	return 0;
+enable_exit:
+	printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+	{ DEVICE_NAME, 0 },
+	{ }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -ENODEV;
+	rc = hdmi_sii_enable(client);
+	return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = hdmi_sii_probe,
+	.remove =  __exit_p(hdmi_sii_remove),
+	.id_table = hmdi_sii_id,
+};
+
+static int __init hdmi_sii_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("hdmi_sii9022"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = HDMI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;
+	pinfo.lcdc.underflow_clr = 0xff;
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device\n", __func__);
+		goto init_exit;
+	}
+
+	ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+	return ret;
+}
+
+static void __exit hdmi_sii_exit(void)
+{
+	i2c_del_driver(&hdmi_sii_i2c_driver);
+}
+
+module_init(hdmi_sii_init);
+module_exit(hdmi_sii_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+MODULE_AUTHOR("Qualcomm Innovation Center, Inc.");
+MODULE_DESCRIPTION("SiI9022 HDMI driver");
+MODULE_ALIAS("platform:hdmi-sii9022");
diff --git a/drivers/staging/msm/lcdc.c b/drivers/staging/msm/lcdc.c
new file mode 100644
index 0000000..735280a
--- /dev/null
+++ b/drivers/staging/msm/lcdc.c
@@ -0,0 +1,239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#include "msm_fb.h"
+
+static int lcdc_probe(struct platform_device *pdev);
+static int lcdc_remove(struct platform_device *pdev);
+
+static int lcdc_off(struct platform_device *pdev);
+static int lcdc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *mdp_lcdc_pclk_clk;
+static struct clk *mdp_lcdc_pad_pclk_clk;
+
+int mdp_lcdc_pclk_clk_rate;
+int mdp_lcdc_pad_pclk_clk_rate;
+
+static struct platform_driver lcdc_driver = {
+	.probe = lcdc_probe,
+	.remove = lcdc_remove,
+	.suspend = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "lcdc",
+		   },
+};
+
+static struct lcdc_platform_data *lcdc_pdata;
+
+static int lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	clk_disable(mdp_lcdc_pclk_clk);
+	clk_disable(mdp_lcdc_pad_pclk_clk);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+		lcdc_pdata->lcdc_power_save(0);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+		ret = lcdc_pdata->lcdc_gpio_config(0);
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//					PM_QOS_DEFAULT_VALUE);
+
+	return ret;
+}
+
+static int lcdc_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+	unsigned long panel_pixclock_freq , pm_qos_freq;
+
+	mfd = platform_get_drvdata(pdev);
+	panel_pixclock_freq = mfd->fbi->var.pixclock;
+
+	if (panel_pixclock_freq > 58000000)
+		/* pm_qos_freq should be in Khz */
+		pm_qos_freq = panel_pixclock_freq / 1000 ;
+	else
+		pm_qos_freq = 58000;
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//						pm_qos_freq);
+	mfd = platform_get_drvdata(pdev);
+
+	clk_enable(mdp_lcdc_pclk_clk);
+	clk_enable(mdp_lcdc_pad_pclk_clk);
+
+	if (lcdc_pdata && lcdc_pdata->lcdc_power_save)
+		lcdc_pdata->lcdc_power_save(1);
+	if (lcdc_pdata && lcdc_pdata->lcdc_gpio_config)
+		ret = lcdc_pdata->lcdc_gpio_config(1);
+
+	clk_set_rate(mdp_lcdc_pclk_clk, mfd->fbi->var.pixclock);
+	clk_set_rate(mdp_lcdc_pad_pclk_clk, mfd->fbi->var.pixclock);
+	mdp_lcdc_pclk_clk_rate = clk_get_rate(mdp_lcdc_pclk_clk);
+	mdp_lcdc_pad_pclk_clk_rate = clk_get_rate(mdp_lcdc_pad_pclk_clk);
+
+	ret = panel_next_on(pdev);
+	return ret;
+}
+
+static int lcdc_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct fb_info *fbi;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+
+	if (pdev->id == 0) {
+		lcdc_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCDC;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "lcdc_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = (struct msm_fb_panel_data *)mdp_dev->dev.platform_data;
+	pdata->on = lcdc_on;
+	pdata->off = lcdc_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	fbi = mfd->fbi;
+	fbi->var.pixclock = mfd->panel_info.clk_rate;
+	fbi->var.left_margin = mfd->panel_info.lcdc.h_back_porch;
+	fbi->var.right_margin = mfd->panel_info.lcdc.h_front_porch;
+	fbi->var.upper_margin = mfd->panel_info.lcdc.v_back_porch;
+	fbi->var.lower_margin = mfd->panel_info.lcdc.v_front_porch;
+	fbi->var.hsync_len = mfd->panel_info.lcdc.h_pulse_width;
+	fbi->var.vsync_len = mfd->panel_info.lcdc.v_pulse_width;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto lcdc_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+		return 0;
+
+lcdc_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int lcdc_remove(struct platform_device *pdev)
+{
+//	pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc");
+	return 0;
+}
+
+static int lcdc_register_driver(void)
+{
+	return platform_driver_register(&lcdc_driver);
+}
+
+static int __init lcdc_driver_init(void)
+{
+	mdp_lcdc_pclk_clk = clk_get(NULL, "mdp_lcdc_pclk_clk");
+	if (IS_ERR(mdp_lcdc_pclk_clk)) {
+		printk(KERN_ERR "error: can't get mdp_lcdc_pclk_clk!\n");
+		return IS_ERR(mdp_lcdc_pclk_clk);
+	}
+	mdp_lcdc_pad_pclk_clk = clk_get(NULL, "mdp_lcdc_pad_pclk_clk");
+	if (IS_ERR(mdp_lcdc_pad_pclk_clk)) {
+		printk(KERN_ERR "error: can't get mdp_lcdc_pad_pclk_clk!\n");
+		return IS_ERR(mdp_lcdc_pad_pclk_clk);
+	}
+//	pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "lcdc",
+//				PM_QOS_DEFAULT_VALUE);
+	return lcdc_register_driver();
+}
+
+module_init(lcdc_driver_init);
diff --git a/drivers/staging/msm/lcdc_external.c b/drivers/staging/msm/lcdc_external.c
new file mode 100644
index 0000000..45ff785
--- /dev/null
+++ b/drivers/staging/msm/lcdc_external.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_external_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_external"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_external_init);
diff --git a/drivers/staging/msm/lcdc_gordon.c b/drivers/staging/msm/lcdc_gordon.c
new file mode 100644
index 0000000..399ec8c
--- /dev/null
+++ b/drivers/staging/msm/lcdc_gordon.c
@@ -0,0 +1,446 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+/* registers */
+#define GORDON_REG_NOP          0x00
+#define GORDON_REG_IMGCTL1      0x10
+#define GORDON_REG_IMGCTL2      0x11
+#define GORDON_REG_IMGSET1      0x12
+#define GORDON_REG_IMGSET2      0x13
+#define GORDON_REG_IVBP1        0x14
+#define GORDON_REG_IHBP1        0x15
+#define GORDON_REG_IVNUM1       0x16
+#define GORDON_REG_IHNUM1       0x17
+#define GORDON_REG_IVBP2        0x18
+#define GORDON_REG_IHBP2        0x19
+#define GORDON_REG_IVNUM2       0x1A
+#define GORDON_REG_IHNUM2       0x1B
+#define GORDON_REG_LCDIFCTL1    0x30
+#define GORDON_REG_VALTRAN      0x31
+#define GORDON_REG_AVCTL        0x33
+#define GORDON_REG_LCDIFCTL2    0x34
+#define GORDON_REG_LCDIFCTL3    0x35
+#define GORDON_REG_LCDIFSET1    0x36
+#define GORDON_REG_PCCTL        0x3C
+#define GORDON_REG_TPARAM1      0x40
+#define GORDON_REG_TLCDIF1      0x41
+#define GORDON_REG_TSSPB_ST1    0x42
+#define GORDON_REG_TSSPB_ED1    0x43
+#define GORDON_REG_TSCK_ST1     0x44
+#define GORDON_REG_TSCK_WD1     0x45
+#define GORDON_REG_TGSPB_VST1   0x46
+#define GORDON_REG_TGSPB_VED1   0x47
+#define GORDON_REG_TGSPB_CH1    0x48
+#define GORDON_REG_TGCK_ST1     0x49
+#define GORDON_REG_TGCK_ED1     0x4A
+#define GORDON_REG_TPCTL_ST1    0x4B
+#define GORDON_REG_TPCTL_ED1    0x4C
+#define GORDON_REG_TPCHG_ED1    0x4D
+#define GORDON_REG_TCOM_CH1     0x4E
+#define GORDON_REG_THBP1        0x4F
+#define GORDON_REG_TPHCTL1      0x50
+#define GORDON_REG_EVPH1        0x51
+#define GORDON_REG_EVPL1        0x52
+#define GORDON_REG_EVNH1        0x53
+#define GORDON_REG_EVNL1        0x54
+#define GORDON_REG_TBIAS1       0x55
+#define GORDON_REG_TPARAM2      0x56
+#define GORDON_REG_TLCDIF2      0x57
+#define GORDON_REG_TSSPB_ST2    0x58
+#define GORDON_REG_TSSPB_ED2    0x59
+#define GORDON_REG_TSCK_ST2     0x5A
+#define GORDON_REG_TSCK_WD2     0x5B
+#define GORDON_REG_TGSPB_VST2   0x5C
+#define GORDON_REG_TGSPB_VED2   0x5D
+#define GORDON_REG_TGSPB_CH2    0x5E
+#define GORDON_REG_TGCK_ST2     0x5F
+#define GORDON_REG_TGCK_ED2     0x60
+#define GORDON_REG_TPCTL_ST2    0x61
+#define GORDON_REG_TPCTL_ED2    0x62
+#define GORDON_REG_TPCHG_ED2    0x63
+#define GORDON_REG_TCOM_CH2     0x64
+#define GORDON_REG_THBP2        0x65
+#define GORDON_REG_TPHCTL2      0x66
+#define GORDON_REG_POWCTL       0x80
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_sdo;
+static int spi_sdi;
+static int spi_dac;
+static unsigned char bit_shift[8] = { (1 << 7),	/* MSB */
+	(1 << 6),
+	(1 << 5),
+	(1 << 4),
+	(1 << 3),
+	(1 << 2),
+	(1 << 1),
+	(1 << 0)		               /* LSB */
+};
+
+struct gordon_state_type{
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+static struct gordon_state_type gordon_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_gordon_pdata;
+
+static void serigo(uint16 reg, uint8 data)
+{
+	unsigned int tx_val = ((0x00FF & reg) << 8) | data;
+	unsigned char i, val = 0;
+
+	/* Enable the Chip Select */
+	gpio_set_value(spi_cs, 1);
+	udelay(33);
+
+	/* Transmit it in two parts, Higher Byte first, then Lower Byte */
+	val = (unsigned char)((tx_val & 0xFF00) >> 8);
+
+	/* Clock should be Low before entering ! */
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_sdi, 1);
+		else
+			gpio_set_value(spi_sdi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		udelay(33);
+		gpio_set_value(spi_sclk, 1);
+		udelay(33);
+		gpio_set_value(spi_sclk, 0);
+	}
+
+	/* Idle state of SDO (MOSI) is Low */
+	gpio_set_value(spi_sdi, 0);
+	/* ..then Lower Byte */
+	val = (uint8) (tx_val & 0x00FF);
+	/* Before we enter here the Clock should be Low ! */
+
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_sdi, 1);
+		else
+			gpio_set_value(spi_sdi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		udelay(33);
+
+		gpio_set_value(spi_sclk, 1);
+		udelay(33);
+		gpio_set_value(spi_sclk, 0);
+	}
+
+	/* Idle state of SDO (MOSI) is Low */
+	gpio_set_value(spi_sdi, 0);
+
+	/* Now Disable the Chip Select */
+	udelay(33);
+	gpio_set_value(spi_cs, 0);
+}
+
+static void spi_init(void)
+{
+	/* Setting the Default GPIO's */
+	spi_sclk = *(lcdc_gordon_pdata->gpio_num);
+	spi_cs   = *(lcdc_gordon_pdata->gpio_num + 1);
+	spi_sdi  = *(lcdc_gordon_pdata->gpio_num + 2);
+	spi_sdo  = *(lcdc_gordon_pdata->gpio_num + 3);
+
+	/* Set the output so that we dont disturb the slave device */
+	gpio_set_value(spi_sclk, 0);
+	gpio_set_value(spi_sdi, 0);
+
+	/* Set the Chip Select De-asserted */
+	gpio_set_value(spi_cs, 0);
+
+}
+
+static void gordon_disp_powerup(void)
+{
+	if (!gordon_state.disp_powered_up && !gordon_state.display_on) {
+		/* Reset the hardware first */
+		/* Include DAC power up implementation here */
+	      gordon_state.disp_powered_up = TRUE;
+	}
+}
+
+static void gordon_init(void)
+{
+	/* Image interface settings */
+	serigo(GORDON_REG_IMGCTL2, 0x00);
+	serigo(GORDON_REG_IMGSET1, 0x00);
+
+	/* Exchange the RGB signal for J510(Softbank mobile) */
+	serigo(GORDON_REG_IMGSET2, 0x12);
+	serigo(GORDON_REG_LCDIFSET1, 0x00);
+
+	/* Pre-charge settings */
+	serigo(GORDON_REG_PCCTL, 0x09);
+	serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+
+	mdelay(1);
+}
+
+static void gordon_disp_on(void)
+{
+	if (gordon_state.disp_powered_up && !gordon_state.display_on) {
+		gordon_init();
+		mdelay(20);
+		/* gordon_dispmode setting */
+		serigo(GORDON_REG_TPARAM1, 0x30);
+		serigo(GORDON_REG_TLCDIF1, 0x00);
+		serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+		serigo(GORDON_REG_TSSPB_ED1, 0x93);
+		serigo(GORDON_REG_TSCK_ST1, 0x88);
+		serigo(GORDON_REG_TSCK_WD1, 0x00);
+		serigo(GORDON_REG_TGSPB_VST1, 0x01);
+		serigo(GORDON_REG_TGSPB_VED1, 0x02);
+		serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+		serigo(GORDON_REG_TGCK_ST1, 0x80);
+		serigo(GORDON_REG_TGCK_ED1, 0x3C);
+		serigo(GORDON_REG_TPCTL_ST1, 0x50);
+		serigo(GORDON_REG_TPCTL_ED1, 0x74);
+		serigo(GORDON_REG_TPCHG_ED1, 0x78);
+		serigo(GORDON_REG_TCOM_CH1, 0x50);
+		serigo(GORDON_REG_THBP1, 0x84);
+		serigo(GORDON_REG_TPHCTL1, 0x00);
+		serigo(GORDON_REG_EVPH1, 0x70);
+		serigo(GORDON_REG_EVPL1, 0x64);
+		serigo(GORDON_REG_EVNH1, 0x56);
+		serigo(GORDON_REG_EVNL1, 0x48);
+		serigo(GORDON_REG_TBIAS1, 0x88);
+
+		/* QVGA settings */
+		serigo(GORDON_REG_TPARAM2, 0x28);
+		serigo(GORDON_REG_TLCDIF2, 0x14);
+		serigo(GORDON_REG_TSSPB_ST2, 0x49);
+		serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+		serigo(GORDON_REG_TSCK_ST2, 0x4A);
+		serigo(GORDON_REG_TSCK_WD2, 0x02);
+		serigo(GORDON_REG_TGSPB_VST2, 0x02);
+		serigo(GORDON_REG_TGSPB_VED2, 0x03);
+		serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+		serigo(GORDON_REG_TGCK_ST2, 0x40);
+		serigo(GORDON_REG_TGCK_ED2, 0x1E);
+		serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+		serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+		serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+		serigo(GORDON_REG_TCOM_CH2, 0x28);
+		serigo(GORDON_REG_THBP2, 0x4D);
+		serigo(GORDON_REG_TPHCTL2, 0x1A);
+
+		/* VGA settings */
+		serigo(GORDON_REG_IVBP1, 0x02);
+		serigo(GORDON_REG_IHBP1, 0x90);
+		serigo(GORDON_REG_IVNUM1, 0xA0);
+		serigo(GORDON_REG_IHNUM1, 0x78);
+
+		/* QVGA settings */
+		serigo(GORDON_REG_IVBP2, 0x02);
+		serigo(GORDON_REG_IHBP2, 0x48);
+		serigo(GORDON_REG_IVNUM2, 0x50);
+		serigo(GORDON_REG_IHNUM2, 0x3C);
+
+		/* Gordon Charge pump settings and ON */
+		serigo(GORDON_REG_POWCTL, 0x03);
+		mdelay(15);
+		serigo(GORDON_REG_POWCTL, 0x07);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x0F);
+		mdelay(15);
+
+		serigo(GORDON_REG_AVCTL, 0x03);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x1F);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x5F);
+		mdelay(15);
+
+		serigo(GORDON_REG_POWCTL, 0x7F);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL1, 0x02);
+		mdelay(15);
+
+		serigo(GORDON_REG_IMGCTL1, 0x00);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL3, 0x00);
+		mdelay(15);
+
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		mdelay(15);
+
+		serigo(GORDON_REG_LCDIFCTL1, 0x03);
+		mdelay(1);
+		gordon_state.display_on = TRUE;
+	}
+}
+
+static int lcdc_gordon_panel_on(struct platform_device *pdev)
+{
+	if (!gordon_state.disp_initialized) {
+		/* Configure reset GPIO that drives DAC */
+		lcdc_gordon_pdata->panel_config_gpio(1);
+		spi_dac = *(lcdc_gordon_pdata->gpio_num + 4);
+		gpio_set_value(spi_dac, 0);
+		udelay(15);
+		gpio_set_value(spi_dac, 1);
+		spi_init();	/* LCD needs SPI */
+		gordon_disp_powerup();
+		gordon_disp_on();
+		gordon_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_gordon_panel_off(struct platform_device *pdev)
+{
+	if (gordon_state.disp_powered_up && gordon_state.display_on) {
+		serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		serigo(GORDON_REG_LCDIFCTL1, 0x02);
+		serigo(GORDON_REG_LCDIFCTL3, 0x01);
+		mdelay(20);
+		serigo(GORDON_REG_VALTRAN, 0x01);
+		serigo(GORDON_REG_IMGCTL1, 0x01);
+		serigo(GORDON_REG_LCDIFCTL1, 0x00);
+		mdelay(20);
+
+		serigo(GORDON_REG_POWCTL, 0x1F);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x07);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x03);
+		mdelay(40);
+
+		serigo(GORDON_REG_POWCTL, 0x00);
+		mdelay(40);
+		lcdc_gordon_pdata->panel_config_gpio(0);
+		gordon_state.display_on = FALSE;
+		gordon_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static void lcdc_gordon_set_backlight(struct msm_fb_data_type *mfd)
+{
+		int bl_level = mfd->bl_level;
+
+		if (bl_level <= 1) {
+			/* keep back light OFF */
+			serigo(GORDON_REG_LCDIFCTL2, 0x0B);
+			udelay(15);
+			serigo(GORDON_REG_VALTRAN, 0x01);
+		} else {
+			/* keep back light ON */
+			serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+			udelay(15);
+			serigo(GORDON_REG_VALTRAN, 0x01);
+		}
+}
+
+static int __init gordon_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_gordon_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = gordon_probe,
+	.driver = {
+		.name   = "lcdc_gordon_vga",
+	},
+};
+
+static struct msm_fb_panel_data gordon_panel_data = {
+	.on = lcdc_gordon_panel_on,
+	.off = lcdc_gordon_panel_off,
+	.set_backlight = lcdc_gordon_set_backlight,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_gordon_vga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &gordon_panel_data,
+	}
+};
+
+static int __init lcdc_gordon_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (msm_fb_detect_client("lcdc_gordon_vga"))
+		return 0;
+#endif
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &gordon_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 640;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 24;
+	pinfo->fb_num = 2;
+	pinfo->clk_rate = 24500000;
+	pinfo->bl_max = 4;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 84;
+	pinfo->lcdc.h_front_porch = 33;
+	pinfo->lcdc.h_pulse_width = 60;
+	pinfo->lcdc.v_back_porch = 0;
+	pinfo->lcdc.v_front_porch = 2;
+	pinfo->lcdc.v_pulse_width = 2;
+	pinfo->lcdc.border_clr = 0;     /* blk */
+	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+module_init(lcdc_gordon_panel_init);
diff --git a/drivers/staging/msm/lcdc_grapefruit.c b/drivers/staging/msm/lcdc_grapefruit.c
new file mode 100644
index 0000000..7284649
--- /dev/null
+++ b/drivers/staging/msm/lcdc_grapefruit.c
@@ -0,0 +1,60 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_grapefruit_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (msm_fb_detect_client("lcdc_grapefruit_vga"))
+		return 0;
+#endif
+
+	pinfo.xres = 1024;
+	pinfo.yres = 600;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 40000000;
+
+	pinfo.lcdc.h_back_porch = 88;
+	pinfo.lcdc.h_front_porch = 40;
+	pinfo.lcdc.h_pulse_width = 128;
+	pinfo.lcdc.v_back_porch = 23;
+	pinfo.lcdc.v_front_porch = 1;
+	pinfo.lcdc.v_pulse_width = 4;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_grapefruit_init);
diff --git a/drivers/staging/msm/lcdc_panel.c b/drivers/staging/msm/lcdc_panel.c
new file mode 100644
index 0000000..b40974e
--- /dev/null
+++ b/drivers/staging/msm/lcdc_panel.c
@@ -0,0 +1,88 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int lcdc_panel_on(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int lcdc_panel_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init lcdc_panel_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = lcdc_panel_probe,
+	.driver = {
+		.name   = "lcdc_panel",
+	},
+};
+
+static struct msm_fb_panel_data lcdc_panel_data = {
+	.on = lcdc_panel_on,
+	.off = lcdc_panel_off,
+};
+
+static int lcdc_dev_id;
+
+int lcdc_device_register(struct msm_panel_info *pinfo)
+{
+	struct platform_device *pdev = NULL;
+	int ret;
+
+	pdev = platform_device_alloc("lcdc_panel", ++lcdc_dev_id);
+	if (!pdev)
+		return -ENOMEM;
+
+	lcdc_panel_data.panel_info = *pinfo;
+	ret = platform_device_add_data(pdev, &lcdc_panel_data,
+		sizeof(lcdc_panel_data));
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_add_data failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_register failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	return 0;
+
+err_device_put:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int __init lcdc_panel_init(void)
+{
+	return platform_driver_register(&this_driver);
+}
+
+module_init(lcdc_panel_init);
diff --git a/drivers/staging/msm/lcdc_prism.c b/drivers/staging/msm/lcdc_prism.c
new file mode 100644
index 0000000..d102c98
--- /dev/null
+++ b/drivers/staging/msm/lcdc_prism.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int __init lcdc_prism_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	ret = msm_fb_detect_client("lcdc_prism_wvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret && (mddi_get_client_id() != 0))
+		return 0;
+#endif
+
+	pinfo.xres = 800;
+	pinfo.yres = 480;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 38460000;
+
+	pinfo.lcdc.h_back_porch = 21;
+	pinfo.lcdc.h_front_porch = 81;
+	pinfo.lcdc.h_pulse_width = 60;
+	pinfo.lcdc.v_back_porch = 18;
+	pinfo.lcdc.v_front_porch = 27;
+	pinfo.lcdc.v_pulse_width = 2;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_prism_init);
diff --git a/drivers/staging/msm/lcdc_sharp_wvga_pt.c b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
new file mode 100644
index 0000000..1f08cf9
--- /dev/null
+++ b/drivers/staging/msm/lcdc_sharp_wvga_pt.c
@@ -0,0 +1,290 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#ifdef CONFIG_ARCH_MSM7X30
+#include <linux/mfd/pmic8058.h>
+#endif
+#include <mach/gpio.h>
+#include "msm_fb.h"
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev);
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+static unsigned char bit_shift[8] = { (1 << 7),	/* MSB */
+	(1 << 6),
+	(1 << 5),
+	(1 << 4),
+	(1 << 3),
+	(1 << 2),
+	(1 << 1),
+	(1 << 0)		               /* LSB */
+};
+
+struct sharp_state_type {
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+struct sharp_spi_data {
+	u8 addr;
+	u8 data;
+};
+
+static struct sharp_spi_data init_sequence[] = {
+	{  15, 0x01 },
+	{   5, 0x01 },
+	{   7, 0x10 },
+	{   9, 0x1E },
+	{  10, 0x04 },
+	{  17, 0xFF },
+	{  21, 0x8A },
+	{  22, 0x00 },
+	{  23, 0x82 },
+	{  24, 0x24 },
+	{  25, 0x22 },
+	{  26, 0x6D },
+	{  27, 0xEB },
+	{  28, 0xB9 },
+	{  29, 0x3A },
+	{  49, 0x1A },
+	{  50, 0x16 },
+	{  51, 0x05 },
+	{  55, 0x7F },
+	{  56, 0x15 },
+	{  57, 0x7B },
+	{  60, 0x05 },
+	{  61, 0x0C },
+	{  62, 0x80 },
+	{  63, 0x00 },
+	{  92, 0x90 },
+	{  97, 0x01 },
+	{  98, 0xFF },
+	{ 113, 0x11 },
+	{ 114, 0x02 },
+	{ 115, 0x08 },
+	{ 123, 0xAB },
+	{ 124, 0x04 },
+	{   6, 0x02 },
+	{ 133, 0x00 },
+	{ 134, 0xFE },
+	{ 135, 0x22 },
+	{ 136, 0x0B },
+	{ 137, 0xFF },
+	{ 138, 0x0F },
+	{ 139, 0x00 },
+	{ 140, 0xFE },
+	{ 141, 0x22 },
+	{ 142, 0x0B },
+	{ 143, 0xFF },
+	{ 144, 0x0F },
+	{ 145, 0x00 },
+	{ 146, 0xFE },
+	{ 147, 0x22 },
+	{ 148, 0x0B },
+	{ 149, 0xFF },
+	{ 150, 0x0F },
+	{ 202, 0x30 },
+	{  30, 0x01 },
+	{   4, 0x01 },
+	{  31, 0x41 },
+};
+
+static struct sharp_state_type sharp_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_sharp_pdata;
+
+static void sharp_spi_write_byte(u8 val)
+{
+	int i;
+
+	/* Clock should be Low before entering */
+	for (i = 0; i < 8; i++) {
+		/* #1: Drive the Data (High or Low) */
+		if (val & bit_shift[i])
+			gpio_set_value(spi_mosi, 1);
+		else
+			gpio_set_value(spi_mosi, 0);
+
+		/* #2: Drive the Clk High and then Low */
+		gpio_set_value(spi_sclk, 1);
+		gpio_set_value(spi_sclk, 0);
+	}
+}
+
+static void serigo(u8 reg, u8 data)
+{
+	/* Enable the Chip Select - low */
+	gpio_set_value(spi_cs, 0);
+	udelay(1);
+
+	/* Transmit register address first, then data */
+	sharp_spi_write_byte(reg);
+
+	/* Idle state of MOSI is Low */
+	gpio_set_value(spi_mosi, 0);
+	udelay(1);
+	sharp_spi_write_byte(data);
+
+	gpio_set_value(spi_mosi, 0);
+	gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_spi_init(void)
+{
+	spi_sclk = *(lcdc_sharp_pdata->gpio_num);
+	spi_cs   = *(lcdc_sharp_pdata->gpio_num + 1);
+	spi_mosi = *(lcdc_sharp_pdata->gpio_num + 2);
+	spi_miso = *(lcdc_sharp_pdata->gpio_num + 3);
+
+	/* Set the output so that we don't disturb the slave device */
+	gpio_set_value(spi_sclk, 0);
+	gpio_set_value(spi_mosi, 0);
+
+	/* Set the Chip Select deasserted (active low) */
+	gpio_set_value(spi_cs, 1);
+}
+
+static void sharp_disp_powerup(void)
+{
+	if (!sharp_state.disp_powered_up && !sharp_state.display_on)
+		sharp_state.disp_powered_up = TRUE;
+}
+
+static void sharp_disp_on(void)
+{
+	int i;
+
+	if (sharp_state.disp_powered_up && !sharp_state.display_on) {
+		for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+			serigo(init_sequence[i].addr,
+			       init_sequence[i].data);
+		}
+		mdelay(10);
+		serigo(31, 0xC1);
+		mdelay(10);
+		serigo(31, 0xD9);
+		serigo(31, 0xDF);
+
+		sharp_state.display_on = TRUE;
+	}
+}
+
+static int lcdc_sharp_panel_on(struct platform_device *pdev)
+{
+	if (!sharp_state.disp_initialized) {
+		lcdc_sharp_pdata->panel_config_gpio(1);
+		sharp_spi_init();
+		sharp_disp_powerup();
+		sharp_disp_on();
+		sharp_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_sharp_panel_off(struct platform_device *pdev)
+{
+	if (sharp_state.disp_powered_up && sharp_state.display_on) {
+		serigo(4, 0x00);
+		mdelay(40);
+		serigo(31, 0xC1);
+		mdelay(40);
+		serigo(31, 0x00);
+		mdelay(100);
+		sharp_state.display_on = FALSE;
+		sharp_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static int __init sharp_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_sharp_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = sharp_probe,
+	.driver = {
+		.name   = "lcdc_sharp_wvga",
+	},
+};
+
+static struct msm_fb_panel_data sharp_panel_data = {
+	.on = lcdc_sharp_panel_on,
+	.off = lcdc_sharp_panel_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_sharp_wvga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &sharp_panel_data,
+	}
+};
+
+static int __init lcdc_sharp_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("lcdc_sharp_wvga_pt"))
+		return 0;
+#endif
+
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &sharp_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 800;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 18;
+	pinfo->fb_num = 2;
+	pinfo->clk_rate = 24500000;
+	pinfo->bl_max = 4;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 20;
+	pinfo->lcdc.h_front_porch = 10;
+	pinfo->lcdc.h_pulse_width = 10;
+	pinfo->lcdc.v_back_porch = 2;
+	pinfo->lcdc.v_front_porch = 2;
+	pinfo->lcdc.v_pulse_width = 2;
+	pinfo->lcdc.border_clr = 0;
+	pinfo->lcdc.underflow_clr = 0xff;
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+module_init(lcdc_sharp_panel_init);
diff --git a/drivers/staging/msm/lcdc_st15.c b/drivers/staging/msm/lcdc_st15.c
new file mode 100644
index 0000000..fed8278
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st15.c
@@ -0,0 +1,237 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "msm_fb.h"
+
+#define DEVICE_NAME "sii9022"
+#define SII9022_DEVICE_ID   0xB0
+
+struct sii9022_i2c_addr_data{
+	u8 addr;
+	u8 data;
+};
+
+/* video mode data */
+static u8 video_mode_data[] = {
+	0x00,
+	0xF9, 0x1C, 0x70, 0x17, 0x72, 0x06, 0xEE, 0x02,
+};
+
+static u8 avi_io_format[] = {
+	0x09,
+	0x00, 0x00,
+};
+
+/* power state */
+static struct sii9022_i2c_addr_data regset0[] = {
+	{ 0x60, 0x04 },
+	{ 0x63, 0x00 },
+	{ 0x1E, 0x00 },
+};
+
+static u8 video_infoframe[] = {
+	0x0C,
+	0xF0, 0x00, 0x68, 0x00, 0x04, 0x00, 0x19, 0x00,
+	0xE9, 0x02, 0x04, 0x01, 0x04, 0x06,
+};
+
+/* configure audio */
+static struct sii9022_i2c_addr_data regset1[] = {
+	{ 0x26, 0x90 },
+	{ 0x20, 0x90 },
+	{ 0x1F, 0x80 },
+	{ 0x26, 0x80 },
+	{ 0x24, 0x02 },
+	{ 0x25, 0x0B },
+	{ 0xBC, 0x02 },
+	{ 0xBD, 0x24 },
+	{ 0xBE, 0x02 },
+};
+
+/* enable audio */
+static u8 misc_infoframe[] = {
+	0xBF,
+	0xC2, 0x84, 0x01, 0x0A, 0x6F, 0x02, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+/* set HDMI, active */
+static struct sii9022_i2c_addr_data regset2[] = {
+	{ 0x1A, 0x01 },
+	{ 0x3D, 0x00 },
+};
+
+static int send_i2c_data(struct i2c_client *client,
+			 struct sii9022_i2c_addr_data *regset,
+			 int size)
+{
+	int i;
+	int rc = 0;
+
+	for (i = 0; i < size; i++) {
+		rc = i2c_smbus_write_byte_data(
+			client,
+			regset[i].addr, regset[i].data);
+		if (rc)
+			break;
+	}
+	return rc;
+}
+
+static int hdmi_sii_enable(struct i2c_client *client)
+{
+	int rc;
+	int retries = 10;
+	int count;
+
+	rc = i2c_smbus_write_byte_data(client, 0xC7, 0x00);
+	if (rc)
+		goto enable_exit;
+
+	do {
+		msleep(1);
+		rc = i2c_smbus_read_byte_data(client, 0x1B);
+	} while ((rc != SII9022_DEVICE_ID) && retries--);
+
+	if (rc != SII9022_DEVICE_ID)
+		return -ENODEV;
+
+	rc = i2c_smbus_write_byte_data(client, 0x1A, 0x11);
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_mode_data);
+	rc = i2c_master_send(client, video_mode_data, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = i2c_smbus_write_byte_data(client, 0x08, 0x20);
+	if (rc)
+		goto enable_exit;
+	count = ARRAY_SIZE(avi_io_format);
+	rc = i2c_master_send(client, avi_io_format, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset0, ARRAY_SIZE(regset0));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(video_infoframe);
+	rc = i2c_master_send(client, video_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset1, ARRAY_SIZE(regset1));
+	if (rc)
+		goto enable_exit;
+
+	count = ARRAY_SIZE(misc_infoframe);
+	rc = i2c_master_send(client, misc_infoframe, count);
+	if (rc != count) {
+		rc = -EIO;
+		goto enable_exit;
+	}
+
+	rc = send_i2c_data(client, regset2, ARRAY_SIZE(regset2));
+	if (rc)
+		goto enable_exit;
+
+	return 0;
+enable_exit:
+	printk(KERN_ERR "%s: exited rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static const struct i2c_device_id hmdi_sii_id[] = {
+	{ DEVICE_NAME, 0 },
+	{ }
+};
+
+static int hdmi_sii_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+		return -ENODEV;
+	rc = hdmi_sii_enable(client);
+	return rc;
+}
+
+
+static struct i2c_driver hdmi_sii_i2c_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = hdmi_sii_probe,
+	.remove =  __exit_p(hdmi_sii_remove),
+	.id_table = hmdi_sii_id,
+};
+
+static int __init lcdc_st15_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_st15"))
+		return 0;
+
+	pinfo.xres = 1366;
+	pinfo.yres = 768;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 120;
+	pinfo.lcdc.h_front_porch = 20;
+	pinfo.lcdc.h_pulse_width = 40;
+	pinfo.lcdc.v_back_porch = 25;
+	pinfo.lcdc.v_front_porch = 1;
+	pinfo.lcdc.v_pulse_width = 7;
+	pinfo.lcdc.border_clr = 0;      /* blk */
+	pinfo.lcdc.underflow_clr = 0xff;        /* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		goto init_exit;
+	}
+
+	ret = i2c_add_driver(&hdmi_sii_i2c_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add i2c driver\n", __func__);
+
+init_exit:
+	return ret;
+}
+
+module_init(lcdc_st15_init);
diff --git a/drivers/staging/msm/lcdc_st1_wxga.c b/drivers/staging/msm/lcdc_st1_wxga.c
new file mode 100644
index 0000000..7376001
--- /dev/null
+++ b/drivers/staging/msm/lcdc_st1_wxga.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_st1_wxga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+	if (msm_fb_detect_client("lcdc_st1_wxga"))
+		return 0;
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_st1_wxga_init);
diff --git a/drivers/staging/msm/lcdc_toshiba_wvga_pt.c b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
new file mode 100644
index 0000000..864d7c1
--- /dev/null
+++ b/drivers/staging/msm/lcdc_toshiba_wvga_pt.c
@@ -0,0 +1,374 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <mach/gpio.h>
+#include <mach/pmic.h>
+#include "msm_fb.h"
+
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+#include "mddihosti.h"
+#endif
+
+static int spi_cs;
+static int spi_sclk;
+static int spi_mosi;
+static int spi_miso;
+
+struct toshiba_state_type{
+	boolean disp_initialized;
+	boolean display_on;
+	boolean disp_powered_up;
+};
+
+static struct toshiba_state_type toshiba_state = { 0 };
+static struct msm_panel_common_pdata *lcdc_toshiba_pdata;
+
+static void toshiba_spi_write_byte(char dc, uint8 data)
+{
+	uint32 bit;
+	int bnum;
+
+	gpio_set_value(spi_sclk, 0); /* clk low */
+	/* dc: 0 for command, 1 for parameter */
+	gpio_set_value(spi_mosi, dc);
+	udelay(1);	/* at least 20 ns */
+	gpio_set_value(spi_sclk, 1); /* clk high */
+	udelay(1);	/* at least 20 ns */
+	bnum = 8;	/* 8 data bits */
+	bit = 0x80;
+	while (bnum) {
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		if (data & bit)
+			gpio_set_value(spi_mosi, 1);
+		else
+			gpio_set_value(spi_mosi, 0);
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+		udelay(1);
+		bit >>= 1;
+		bnum--;
+	}
+}
+
+static void toshiba_spi_write(char cmd, uint32 data, int num)
+{
+	char *bp;
+
+	gpio_set_value(spi_cs, 1);	/* cs high */
+
+	/* command byte first */
+	toshiba_spi_write_byte(0, cmd);
+
+	/* followed by parameter bytes */
+	if (num) {
+		bp = (char *)&data;;
+		bp += (num - 1);
+		while (num) {
+			toshiba_spi_write_byte(1, *bp);
+			num--;
+			bp--;
+		}
+	}
+
+	gpio_set_value(spi_cs, 0);	/* cs low */
+	udelay(1);
+}
+
+void toshiba_spi_read_bytes(char cmd, uint32 *data, int num)
+{
+	uint32 dbit, bits;
+	int bnum;
+
+	gpio_set_value(spi_cs, 1);	/* cs high */
+
+	/* command byte first */
+	toshiba_spi_write_byte(0, cmd);
+
+	if (num > 1) {
+		/* extra dc bit */
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		udelay(1);
+		dbit = gpio_get_value(spi_miso);/* dc bit */
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+	}
+
+	/* followed by data bytes */
+	bnum = num * 8;	/* number of bits */
+	bits = 0;
+	while (bnum) {
+		bits <<= 1;
+		gpio_set_value(spi_sclk, 0); /* clk low */
+		udelay(1);
+		dbit = gpio_get_value(spi_miso);
+		udelay(1);
+		gpio_set_value(spi_sclk, 1); /* clk high */
+		bits |= dbit;
+		bnum--;
+	}
+
+	*data = bits;
+
+	udelay(1);
+	gpio_set_value(spi_cs, 0);	/* cs low */
+	udelay(1);
+}
+
+static void spi_pin_assign(void)
+{
+	/* Setting the Default GPIO's */
+	spi_sclk = *(lcdc_toshiba_pdata->gpio_num);
+	spi_cs   = *(lcdc_toshiba_pdata->gpio_num + 1);
+	spi_mosi  = *(lcdc_toshiba_pdata->gpio_num + 2);
+	spi_miso  = *(lcdc_toshiba_pdata->gpio_num + 3);
+}
+
+static void toshiba_disp_powerup(void)
+{
+	if (!toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+		/* Reset the hardware first */
+		/* Include DAC power up implementation here */
+	      toshiba_state.disp_powered_up = TRUE;
+	}
+}
+
+static void toshiba_disp_on(void)
+{
+	uint32	data;
+
+	gpio_set_value(spi_cs, 0);	/* low */
+	gpio_set_value(spi_sclk, 1);	/* high */
+	gpio_set_value(spi_mosi, 0);
+	gpio_set_value(spi_miso, 0);
+
+	if (toshiba_state.disp_powered_up && !toshiba_state.display_on) {
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0, 0, 0);
+		mdelay(7);
+		toshiba_spi_write(0xba, 0x11, 1);
+		toshiba_spi_write(0x36, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0x3a, 0x60, 1);
+		toshiba_spi_write(0xb1, 0x5d, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb2, 0x33, 1);
+		toshiba_spi_write(0xb3, 0x22, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb4, 0x02, 1);
+		toshiba_spi_write(0xb5, 0x1e, 1); /* vcs -- adjust brightness */
+		mdelay(1);
+		toshiba_spi_write(0xb6, 0x27, 1);
+		toshiba_spi_write(0xb7, 0x03, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb9, 0x24, 1);
+		toshiba_spi_write(0xbd, 0xa1, 1);
+		mdelay(1);
+		toshiba_spi_write(0xbb, 0x00, 1);
+		toshiba_spi_write(0xbf, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xbe, 0x00, 1);
+		toshiba_spi_write(0xc0, 0x11, 1);
+		mdelay(1);
+		toshiba_spi_write(0xc1, 0x11, 1);
+		toshiba_spi_write(0xc2, 0x11, 1);
+		mdelay(1);
+		toshiba_spi_write(0xc3, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc4, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc5, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc6, 0x3232, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc7, 0x6445, 2);
+		mdelay(1);
+		toshiba_spi_write(0xc8, 0x44, 1);
+		toshiba_spi_write(0xc9, 0x52, 1);
+		mdelay(1);
+		toshiba_spi_write(0xca, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0xec, 0x02a4, 2);	/* 0x02a4 */
+		mdelay(1);
+		toshiba_spi_write(0xcf, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xd0, 0xc003, 2);	/* c003 */
+		mdelay(1);
+		toshiba_spi_write(0xd1, 0x01, 1);
+		mdelay(1);
+		toshiba_spi_write(0xd2, 0x0028, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd3, 0x0028, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd4, 0x26a4, 2);
+		mdelay(1);
+		toshiba_spi_write(0xd5, 0x20, 1);
+		mdelay(1);
+		toshiba_spi_write(0xef, 0x3200, 2);
+		mdelay(32);
+		toshiba_spi_write(0xbc, 0x80, 1);	/* wvga pass through */
+		toshiba_spi_write(0x3b, 0x00, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb0, 0x16, 1);
+		mdelay(1);
+		toshiba_spi_write(0xb8, 0xfff5, 2);
+		mdelay(1);
+		toshiba_spi_write(0x11, 0, 0);
+		mdelay(5);
+		toshiba_spi_write(0x29, 0, 0);
+		mdelay(5);
+		toshiba_state.display_on = TRUE;
+	}
+
+	data = 0;
+	toshiba_spi_read_bytes(0x04, &data, 3);
+	printk(KERN_INFO "toshiba_disp_on: id=%x\n", data);
+
+}
+
+static int lcdc_toshiba_panel_on(struct platform_device *pdev)
+{
+	if (!toshiba_state.disp_initialized) {
+		/* Configure reset GPIO that drives DAC */
+		if (lcdc_toshiba_pdata->panel_config_gpio)
+			lcdc_toshiba_pdata->panel_config_gpio(1);
+		toshiba_disp_powerup();
+		toshiba_disp_on();
+		toshiba_state.disp_initialized = TRUE;
+	}
+	return 0;
+}
+
+static int lcdc_toshiba_panel_off(struct platform_device *pdev)
+{
+	if (toshiba_state.disp_powered_up && toshiba_state.display_on) {
+		/* Main panel power off (Deep standby in) */
+
+		toshiba_spi_write(0x28, 0, 0);	/* display off */
+		mdelay(1);
+		toshiba_spi_write(0xb8, 0x8002, 2);	/* output control */
+		mdelay(1);
+		toshiba_spi_write(0x10, 0x00, 1);	/* sleep mode in */
+		mdelay(85);		/* wait 85 msec */
+		toshiba_spi_write(0xb0, 0x00, 1);	/* deep standby in */
+		mdelay(1);
+		if (lcdc_toshiba_pdata->panel_config_gpio)
+			lcdc_toshiba_pdata->panel_config_gpio(0);
+		toshiba_state.display_on = FALSE;
+		toshiba_state.disp_initialized = FALSE;
+	}
+	return 0;
+}
+
+static void lcdc_toshiba_set_backlight(struct msm_fb_data_type *mfd)
+{
+	int bl_level;
+	int ret = -EPERM;
+
+	bl_level = mfd->bl_level;
+	ret = pmic_set_led_intensity(LED_LCD, bl_level);
+
+	if (ret)
+		printk(KERN_WARNING "%s: can't set lcd backlight!\n",
+				__func__);
+}
+
+static int __init toshiba_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		lcdc_toshiba_pdata = pdev->dev.platform_data;
+		spi_pin_assign();
+		return 0;
+	}
+	msm_fb_add_device(pdev);
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = toshiba_probe,
+	.driver = {
+		.name   = "lcdc_toshiba_wvga",
+	},
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+	.on = lcdc_toshiba_panel_on,
+	.off = lcdc_toshiba_panel_off,
+	.set_backlight = lcdc_toshiba_set_backlight,
+};
+
+static struct platform_device this_device = {
+	.name   = "lcdc_toshiba_wvga",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &toshiba_panel_data,
+	}
+};
+
+static int __init lcdc_toshiba_panel_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
+	if (mddi_get_client_id() != 0)
+		return 0;
+
+	ret = msm_fb_detect_client("lcdc_toshiba_wvga_pt");
+	if (ret)
+		return 0;
+
+#endif
+
+	ret = platform_driver_register(&this_driver);
+	if (ret)
+		return ret;
+
+	pinfo = &toshiba_panel_data.panel_info;
+	pinfo->xres = 480;
+	pinfo->yres = 800;
+	pinfo->type = LCDC_PANEL;
+	pinfo->pdest = DISPLAY_1;
+	pinfo->wait_cycle = 0;
+	pinfo->bpp = 18;
+	pinfo->fb_num = 2;
+	/* 30Mhz mdp_lcdc_pclk and mdp_lcdc_pad_pcl */
+	pinfo->clk_rate = 27648000;
+	pinfo->bl_max = 15;
+	pinfo->bl_min = 1;
+
+	pinfo->lcdc.h_back_porch = 184;	/* hsw = 8 + hbp=184 */
+	pinfo->lcdc.h_front_porch = 4;
+	pinfo->lcdc.h_pulse_width = 8;
+	pinfo->lcdc.v_back_porch = 2;	/* vsw=1 + vbp = 2 */
+	pinfo->lcdc.v_front_porch = 3;
+	pinfo->lcdc.v_pulse_width = 1;
+	pinfo->lcdc.border_clr = 0;     /* blk */
+	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
+	pinfo->lcdc.hsync_skew = 0;
+
+	ret = platform_device_register(&this_device);
+	if (ret)
+		platform_driver_unregister(&this_driver);
+
+	return ret;
+}
+
+device_initcall(lcdc_toshiba_panel_init);
diff --git a/drivers/staging/msm/lcdc_wxga.c b/drivers/staging/msm/lcdc_wxga.c
new file mode 100644
index 0000000..202c92c
--- /dev/null
+++ b/drivers/staging/msm/lcdc_wxga.c
@@ -0,0 +1,56 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+
+static int __init lcdc_wxga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("lcdc_wxga"))
+		return 0;
+#endif
+
+	pinfo.xres = 1280;
+	pinfo.yres = 720;
+	pinfo.type = LCDC_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 24;
+	pinfo.fb_num = 2;
+	pinfo.clk_rate = 74250000;
+
+	pinfo.lcdc.h_back_porch = 124;
+	pinfo.lcdc.h_front_porch = 110;
+	pinfo.lcdc.h_pulse_width = 136;
+	pinfo.lcdc.v_back_porch = 19;
+	pinfo.lcdc.v_front_porch = 5;
+	pinfo.lcdc.v_pulse_width = 6;
+	pinfo.lcdc.border_clr = 0;	/* blk */
+	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
+	pinfo.lcdc.hsync_skew = 0;
+
+	ret = lcdc_device_register(&pinfo);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(lcdc_wxga_init);
diff --git a/drivers/staging/msm/logo.c b/drivers/staging/msm/logo.c
new file mode 100644
index 0000000..7272765
--- /dev/null
+++ b/drivers/staging/msm/logo.c
@@ -0,0 +1,98 @@
+/* drivers/video/msm/logo.c
+ *
+ * Show Logo in RLE 565 format
+ *
+ * Copyright (C) 2008 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/vt_kern.h>
+#include <linux/unistd.h>
+#include <linux/syscalls.h>
+
+#include <linux/irq.h>
+#include <asm/system.h>
+
+#define fb_width(fb)	((fb)->var.xres)
+#define fb_height(fb)	((fb)->var.yres)
+#define fb_size(fb)	((fb)->var.xres * (fb)->var.yres * 2)
+
+static void memset16(void *_ptr, unsigned short val, unsigned count)
+{
+	unsigned short *ptr = _ptr;
+	count >>= 1;
+	while (count--)
+		*ptr++ = val;
+}
+
+/* 565RLE image format: [count(2 bytes), rle(2 bytes)] */
+int load_565rle_image(char *filename)
+{
+	struct fb_info *info;
+	int fd, err = 0;
+	unsigned count, max;
+	unsigned short *data, *bits, *ptr;
+
+	info = registered_fb[0];
+	if (!info) {
+		printk(KERN_WARNING "%s: Can not access framebuffer\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	fd = sys_open(filename, O_RDONLY, 0);
+	if (fd < 0) {
+		printk(KERN_WARNING "%s: Can not open %s\n",
+			__func__, filename);
+		return -ENOENT;
+	}
+	count = (unsigned)sys_lseek(fd, (off_t)0, 2);
+	if (count == 0) {
+		sys_close(fd);
+		err = -EIO;
+		goto err_logo_close_file;
+	}
+	sys_lseek(fd, (off_t)0, 0);
+	data = kmalloc(count, GFP_KERNEL);
+	if (!data) {
+		printk(KERN_WARNING "%s: Can not alloc data\n", __func__);
+		err = -ENOMEM;
+		goto err_logo_close_file;
+	}
+	if ((unsigned)sys_read(fd, (char *)data, count) != count) {
+		err = -EIO;
+		goto err_logo_free_data;
+	}
+
+	max = fb_width(info) * fb_height(info);
+	ptr = data;
+	bits = (unsigned short *)(info->screen_base);
+	while (count > 3) {
+		unsigned n = ptr[0];
+		if (n > max)
+			break;
+		memset16(bits, ptr[1], n << 1);
+		bits += n;
+		max -= n;
+		ptr += 2;
+		count -= 4;
+	}
+
+err_logo_free_data:
+	kfree(data);
+err_logo_close_file:
+	sys_close(fd);
+	return err;
+}
+EXPORT_SYMBOL(load_565rle_image);
diff --git a/drivers/staging/msm/mddi.c b/drivers/staging/msm/mddi.c
new file mode 100644
index 0000000..132eb1a
--- /dev/null
+++ b/drivers/staging/msm/mddi.c
@@ -0,0 +1,375 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "mddihost.h"
+#include <mach/gpio.h>
+#include <mach/clk.h>
+
+static int mddi_probe(struct platform_device *pdev);
+static int mddi_remove(struct platform_device *pdev);
+
+static int mddi_off(struct platform_device *pdev);
+static int mddi_on(struct platform_device *pdev);
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h);
+static void mddi_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static struct clk *mddi_clk;
+static struct clk *mddi_pclk;
+static struct mddi_platform_data *mddi_pdata;
+
+static struct platform_driver mddi_driver = {
+	.probe = mddi_probe,
+	.remove = mddi_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+	.suspend = mddi_suspend,
+	.resume = mddi_resume,
+#endif
+#endif
+	.suspend_late = NULL,
+	.resume_early = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "mddi",
+		   },
+};
+
+extern int int_mddi_pri_flag;
+
+static int mddi_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(0);
+
+	return ret;
+}
+
+static int mddi_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	u32 clk_rate;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(1);
+
+	clk_rate = mfd->fbi->var.pixclock;
+	clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+	if (mddi_pdata &&
+	    mddi_pdata->mddi_sel_clk &&
+	    mddi_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_min_rate(mddi_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+			__func__);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mddi_resource_initialized;
+
+static int mddi_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t size ;
+	u32 clk_rate;
+
+	if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+		mddi_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_pmdh_base =  ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("primary mddi base phy_addr = 0x%x virt = 0x%x\n",
+				pdev->resource[0].start, (int) msm_pmdh_base);
+
+		if (unlikely(!msm_pmdh_base))
+			return -ENOMEM;
+
+		if (mddi_pdata && mddi_pdata->mddi_power_save)
+			mddi_pdata->mddi_power_save(1);
+
+		mddi_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mddi_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_LCD;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mddi_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = mddi_on;
+	pdata->off = mddi_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	clk_rate = mfd->panel_info.clk_max;
+	if (mddi_pdata &&
+	    mddi_pdata->mddi_sel_clk &&
+	    mddi_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_max_rate(mddi_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+	mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto mddi_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->mddi_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+	mfd->mddi_early_suspend.suspend = mddi_early_suspend;
+	mfd->mddi_early_suspend.resume = mddi_early_resume;
+	register_early_suspend(&mfd->mddi_early_suspend);
+#endif
+
+	return 0;
+
+mddi_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int mddi_pad_ctrl;
+static int mddi_power_locked;
+static int mddi_is_in_suspend;
+
+void mddi_disable(int lock)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+	if (mddi_power_locked)
+		return;
+
+	if (lock)
+		mddi_power_locked = 1;
+
+	if (mddi_host_timer.function)
+		del_timer_sync(&mddi_host_timer);
+
+	mddi_pad_ctrl = mddi_host_reg_in(PAD_CTL);
+	mddi_host_reg_out(PAD_CTL, 0x0);
+
+	if (clk_set_min_rate(mddi_clk, 0) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+	clk_disable(mddi_clk);
+	if (mddi_pclk)
+		clk_disable(mddi_pclk);
+	disable_irq(INT_MDDI_PRI);
+
+	if (mddi_pdata && mddi_pdata->mddi_power_save)
+		mddi_pdata->mddi_power_save(0);
+}
+
+static int mddi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (mddi_is_in_suspend)
+		return 0;
+
+	mddi_is_in_suspend = 1;
+	mddi_disable(0);
+	return 0;
+}
+
+static int mddi_resume(struct platform_device *pdev)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+
+	if (!mddi_is_in_suspend)
+		return 0;
+
+	mddi_is_in_suspend = 0;
+
+	if (mddi_power_locked)
+		return 0;
+
+	enable_irq(INT_MDDI_PRI);
+	clk_enable(mddi_clk);
+	if (mddi_pclk)
+		clk_enable(mddi_pclk);
+	mddi_host_reg_out(PAD_CTL, mddi_pad_ctrl);
+
+	if (mddi_host_timer.function)
+		mddi_host_timer_service(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_early_suspend(struct early_suspend *h)
+{
+	pm_message_t state;
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_early_suspend);
+
+	state.event = PM_EVENT_SUSPEND;
+	mddi_suspend(mfd->pdev, state);
+}
+
+static void mddi_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_early_suspend);
+	mddi_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_remove(struct platform_device *pdev)
+{
+	if (mddi_host_timer.function)
+		del_timer_sync(&mddi_host_timer);
+
+	iounmap(msm_pmdh_base);
+
+	return 0;
+}
+
+static int mddi_register_driver(void)
+{
+	return platform_driver_register(&mddi_driver);
+}
+
+static int __init mddi_driver_init(void)
+{
+	int ret;
+
+	mddi_clk = clk_get(NULL, "mddi_clk");
+	if (IS_ERR(mddi_clk)) {
+		printk(KERN_ERR "can't find mddi_clk \n");
+		return PTR_ERR(mddi_clk);
+	}
+	clk_enable(mddi_clk);
+
+	mddi_pclk = clk_get(NULL, "mddi_pclk");
+	if (IS_ERR(mddi_pclk))
+		mddi_pclk = NULL;
+	else
+		clk_enable(mddi_pclk);
+
+	ret = mddi_register_driver();
+	if (ret) {
+		clk_disable(mddi_clk);
+		clk_put(mddi_clk);
+		if (mddi_pclk) {
+			clk_disable(mddi_pclk);
+			clk_put(mddi_pclk);
+		}
+		printk(KERN_ERR "mddi_register_driver() failed!\n");
+		return ret;
+	}
+
+	mddi_init();
+
+	return ret;
+}
+
+module_init(mddi_driver_init);
diff --git a/drivers/staging/msm/mddi_ext.c b/drivers/staging/msm/mddi_ext.c
new file mode 100644
index 0000000..c0c168c7
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext.c
@@ -0,0 +1,320 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <mach/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_fb.h"
+#include "mddihosti.h"
+
+static int mddi_ext_probe(struct platform_device *pdev);
+static int mddi_ext_remove(struct platform_device *pdev);
+
+static int mddi_ext_off(struct platform_device *pdev);
+static int mddi_ext_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state);
+static int mddi_ext_resume(struct platform_device *pdev);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h);
+static void mddi_ext_early_resume(struct early_suspend *h);
+#endif
+
+static struct platform_driver mddi_ext_driver = {
+	.probe = mddi_ext_probe,
+	.remove = mddi_ext_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+#ifdef CONFIG_PM
+	.suspend = mddi_ext_suspend,
+	.resume = mddi_ext_resume,
+#endif
+#endif
+	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "mddi_ext",
+		   },
+};
+
+static struct clk *mddi_ext_clk;
+static struct mddi_platform_data *mddi_ext_pdata;
+
+extern int int_mddi_ext_flag;
+
+static int mddi_ext_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+	mddi_host_stop_ext_display();
+
+	return ret;
+}
+
+static int mddi_ext_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	u32 clk_rate;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	clk_rate = mfd->fbi->var.pixclock;
+	clk_rate = min(clk_rate, mfd->panel_info.clk_max);
+
+	if (mddi_ext_pdata &&
+	    mddi_ext_pdata->mddi_sel_clk &&
+	    mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+		printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_min_rate(mddi_ext_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n",
+			__func__);
+
+	mddi_host_start_ext_display();
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mddi_ext_resource_initialized;
+
+static int mddi_ext_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t size ;
+	u32 clk_rate;
+
+	if ((pdev->id == 0) && (pdev->num_resources >= 0)) {
+		mddi_ext_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_emdh_base = ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("external mddi base address = 0x%x\n",
+				pdev->resource[0].start);
+
+		if (unlikely(!msm_emdh_base))
+			return -ENOMEM;
+
+		mddi_ext_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mddi_ext_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_EXT_MDDI;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mddi_ext_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = mddi_ext_on;
+	pdata->off = mddi_ext_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_RGB_565;
+
+	clk_rate = mfd->panel_info.clk_max;
+	if (mddi_ext_pdata &&
+	    mddi_ext_pdata->mddi_sel_clk &&
+	    mddi_ext_pdata->mddi_sel_clk(&clk_rate))
+			printk(KERN_ERR
+			  "%s: can't select mddi io clk targate rate = %d\n",
+			  __func__, clk_rate);
+
+	if (clk_set_max_rate(mddi_ext_clk, clk_rate) < 0)
+		printk(KERN_ERR "%s: clk_set_max_rate failed\n", __func__);
+	mfd->panel_info.clk_rate = mfd->panel_info.clk_min;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto mddi_ext_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->mddi_ext_early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;
+	mfd->mddi_ext_early_suspend.suspend = mddi_ext_early_suspend;
+	mfd->mddi_ext_early_suspend.resume = mddi_ext_early_resume;
+	register_early_suspend(&mfd->mddi_ext_early_suspend);
+#endif
+
+	return 0;
+
+mddi_ext_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int mddi_ext_is_in_suspend;
+
+static int mddi_ext_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (mddi_ext_is_in_suspend)
+		return 0;
+
+	mddi_ext_is_in_suspend = 1;
+
+	if (clk_set_min_rate(mddi_ext_clk, 0) < 0)
+		printk(KERN_ERR "%s: clk_set_min_rate failed\n", __func__);
+
+	clk_disable(mddi_ext_clk);
+	disable_irq(INT_MDDI_EXT);
+
+	return 0;
+}
+
+static int mddi_ext_resume(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mddi_ext_is_in_suspend)
+		return 0;
+
+	mddi_ext_is_in_suspend = 0;
+	enable_irq(INT_MDDI_EXT);
+
+	clk_enable(mddi_ext_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mddi_ext_early_suspend(struct early_suspend *h)
+{
+	pm_message_t state;
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_ext_early_suspend);
+
+	state.event = PM_EVENT_SUSPEND;
+	mddi_ext_suspend(mfd->pdev, state);
+}
+
+static void mddi_ext_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+							mddi_ext_early_suspend);
+	mddi_ext_resume(mfd->pdev);
+}
+#endif
+
+static int mddi_ext_remove(struct platform_device *pdev)
+{
+	iounmap(msm_emdh_base);
+	return 0;
+}
+
+static int mddi_ext_register_driver(void)
+{
+	return platform_driver_register(&mddi_ext_driver);
+}
+
+static int __init mddi_ext_driver_init(void)
+{
+	int ret;
+
+	mddi_ext_clk = clk_get(NULL, "emdh_clk");
+	if (IS_ERR(mddi_ext_clk)) {
+		printk(KERN_ERR "can't find emdh_clk\n");
+		return PTR_ERR(mddi_ext_clk);
+	}
+	clk_enable(mddi_ext_clk);
+
+	ret = mddi_ext_register_driver();
+	if (ret) {
+		clk_disable(mddi_ext_clk);
+		clk_put(mddi_ext_clk);
+		printk(KERN_ERR "mddi_ext_register_driver() failed!\n");
+		return ret;
+	}
+	mddi_init();
+
+	return ret;
+}
+
+module_init(mddi_ext_driver_init);
diff --git a/drivers/staging/msm/mddi_ext_lcd.c b/drivers/staging/msm/mddi_ext_lcd.c
new file mode 100644
index 0000000..502e80d
--- /dev/null
+++ b/drivers/staging/msm/mddi_ext_lcd.c
@@ -0,0 +1,91 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int mddi_ext_lcd_on(struct platform_device *pdev);
+static int mddi_ext_lcd_off(struct platform_device *pdev);
+
+static int mddi_ext_lcd_on(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int mddi_ext_lcd_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init mddi_ext_lcd_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_ext_lcd_probe,
+	.driver = {
+		.name   = "extmddi_svga",
+	},
+};
+
+static struct msm_fb_panel_data mddi_ext_lcd_panel_data = {
+	.panel_info.xres = 800,
+	.panel_info.yres = 600,
+	.panel_info.type = EXT_MDDI_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 18,
+	.panel_info.fb_num = 2,
+	.panel_info.clk_rate = 122880000,
+	.panel_info.clk_min  = 120000000,
+	.panel_info.clk_max  = 125000000,
+	.on = mddi_ext_lcd_on,
+	.off = mddi_ext_lcd_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "extmddi_svga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &mddi_ext_lcd_panel_data,
+	}
+};
+
+static int __init mddi_ext_lcd_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &mddi_ext_lcd_panel_data.panel_info;
+		pinfo->lcd.vsync_enable = FALSE;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(mddi_ext_lcd_init);
diff --git a/drivers/staging/msm/mddi_prism.c b/drivers/staging/msm/mddi_prism.c
new file mode 100644
index 0000000..489d404
--- /dev/null
+++ b/drivers/staging/msm/mddi_prism.c
@@ -0,0 +1,114 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+static int prism_lcd_on(struct platform_device *pdev);
+static int prism_lcd_off(struct platform_device *pdev);
+
+static int prism_lcd_on(struct platform_device *pdev)
+{
+	/* Set the MDP pixel data attributes for Primary Display */
+	mddi_host_write_pix_attr_reg(0x00C3);
+
+	return 0;
+}
+
+static int prism_lcd_off(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __init prism_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = prism_probe,
+	.driver = {
+		.name   = "mddi_prism_wvga",
+	},
+};
+
+static struct msm_fb_panel_data prism_panel_data = {
+	.on = prism_lcd_on,
+	.off = prism_lcd_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "mddi_prism_wvga",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &prism_panel_data,
+	}
+};
+
+static int __init prism_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_prism_wvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+
+		if (((id >> 16) != 0x4474) || ((id & 0xffff) == 0x8960))
+			return 0;
+	}
+#endif
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &prism_panel_data.panel_info;
+		pinfo->xres = 800;
+		pinfo->yres = 480;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->fb_num = 2;
+		pinfo->clk_rate = 153600000;
+		pinfo->clk_min = 150000000;
+		pinfo->clk_max = 160000000;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 = 6050;
+		pinfo->lcd.v_back_porch = 23;
+		pinfo->lcd.v_front_porch = 20;
+		pinfo->lcd.v_pulse_width = 105;
+		pinfo->lcd.hw_vsync_mode = TRUE;
+		pinfo->lcd.vsync_notifier_period = 0;
+
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(prism_init);
diff --git a/drivers/staging/msm/mddi_sharp.c b/drivers/staging/msm/mddi_sharp.c
new file mode 100644
index 0000000..1da1be4
--- /dev/null
+++ b/drivers/staging/msm/mddi_sharp.c
@@ -0,0 +1,892 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define SHARP_QVGA_PRIM 1
+#define SHARP_128X128_SECD 2
+
+extern uint32 mddi_host_core_version;
+static boolean mddi_debug_prim_wait = FALSE;
+static boolean mddi_sharp_vsync_wake = TRUE;
+static boolean mddi_sharp_monitor_refresh_value = TRUE;
+static boolean mddi_sharp_report_refresh_measurements = FALSE;
+static uint32 mddi_sharp_rows_per_second = 13830;	/* 5200000/376 */
+static uint32 mddi_sharp_rows_per_refresh = 338;
+static uint32 mddi_sharp_usecs_per_refresh = 24440;	/* (376+338)/5200000 */
+static boolean mddi_sharp_debug_60hz_refresh = FALSE;
+
+extern mddi_gpio_info_type mddi_gpio;
+extern boolean mddi_vsync_detect_enabled;
+static msm_fb_vsync_handler_type mddi_sharp_vsync_handler;
+static void *mddi_sharp_vsync_handler_arg;
+static uint16 mddi_sharp_vsync_attempts;
+
+static void mddi_sharp_prim_lcd_init(void);
+static void mddi_sharp_sub_lcd_init(void);
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd);
+static void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler,
+					 void *);
+static void mddi_sharp_lcd_vsync_detected(boolean detected);
+static struct msm_panel_common_pdata *mddi_sharp_pdata;
+
+#define REG_SYSCTL    0x0000
+#define REG_INTR    0x0006
+#define REG_CLKCNF    0x000C
+#define REG_CLKDIV1    0x000E
+#define REG_CLKDIV2    0x0010
+
+#define REG_GIOD    0x0040
+#define REG_GIOA    0x0042
+
+#define REG_AGM      0x010A
+#define REG_FLFT    0x0110
+#define REG_FRGT    0x0112
+#define REG_FTOP    0x0114
+#define REG_FBTM    0x0116
+#define REG_FSTRX    0x0118
+#define REG_FSTRY    0x011A
+#define REG_VRAM    0x0202
+#define REG_SSDCTL    0x0330
+#define REG_SSD0    0x0332
+#define REG_PSTCTL1    0x0400
+#define REG_PSTCTL2    0x0402
+#define REG_PTGCTL    0x042A
+#define REG_PTHP    0x042C
+#define REG_PTHB    0x042E
+#define REG_PTHW    0x0430
+#define REG_PTHF    0x0432
+#define REG_PTVP    0x0434
+#define REG_PTVB    0x0436
+#define REG_PTVW    0x0438
+#define REG_PTVF    0x043A
+#define REG_VBLKS    0x0458
+#define REG_VBLKE    0x045A
+#define REG_SUBCTL    0x0700
+#define REG_SUBTCMD    0x0702
+#define REG_SUBTCMDD  0x0704
+#define REG_REVBYTE    0x0A02
+#define REG_REVCNT    0x0A04
+#define REG_REVATTR    0x0A06
+#define REG_REVFMT    0x0A08
+
+#define SHARP_SUB_UNKNOWN 0xffffffff
+#define SHARP_SUB_HYNIX 1
+#define SHARP_SUB_ROHM  2
+
+static uint32 sharp_subpanel_type = SHARP_SUB_UNKNOWN;
+
+static void sub_through_write(int sub_rs, uint32 sub_data)
+{
+	mddi_queue_register_write(REG_SUBTCMDD, sub_data, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=0,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0004 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+}
+
+static uint32 sub_through_read(int sub_rs)
+{
+	uint32 sub_data;
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=0,RD=1,WE=0,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0002 | sub_rs, TRUE, 0);
+
+	mddi_queue_register_read(REG_SUBTCMDD, &sub_data, TRUE, 0);
+
+	/* CS=0,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x0006 | sub_rs, FALSE, 0);
+
+	/* CS=1,RD=1,WE=1,RS=sub_rs */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000e | sub_rs, TRUE, 0);
+
+	return sub_data;
+}
+
+static void serigo(uint32 ssd)
+{
+	uint32 ssdctl;
+
+	mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+	ssdctl = ((ssdctl & 0xE7) | 0x02);
+
+	mddi_queue_register_write(REG_SSD0, ssd, FALSE, 0);
+	mddi_queue_register_write(REG_SSDCTL, ssdctl, TRUE, 0);
+
+	do {
+		mddi_queue_register_read(REG_SSDCTL, &ssdctl, TRUE, 0);
+	} while ((ssdctl & 0x0002) != 0);
+
+	if (mddi_debug_prim_wait)
+		mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_powerdown(void)
+{
+	serigo(0x0131);
+	serigo(0x0300);
+	mddi_wait(40);
+	serigo(0x0135);
+	mddi_wait(20);
+	serigo(0x2122);
+	mddi_wait(20);
+	serigo(0x0201);
+	mddi_wait(20);
+	serigo(0x2100);
+	mddi_wait(20);
+	serigo(0x2000);
+	mddi_wait(20);
+
+	mddi_queue_register_write(REG_PSTCTL1, 0x1, TRUE, 0);
+	mddi_wait(100);
+	mddi_queue_register_write(REG_PSTCTL1, 0x0, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_SYSCTL, 0x1, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_CLKDIV1, 0x3, TRUE, 0);
+	mddi_wait(2);
+	mddi_queue_register_write(REG_SSDCTL, 0x0000, TRUE, 0);	/* SSDRESET */
+	mddi_queue_register_write(REG_SYSCTL, 0x0, TRUE, 0);
+	mddi_wait(2);
+}
+
+static void mddi_sharp_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+	uint32 regdata;
+	int32 level;
+	int max = mfd->panel_info.bl_max;
+	int min = mfd->panel_info.bl_min;
+
+	if (mddi_sharp_pdata && mddi_sharp_pdata->backlight_level) {
+		level = mddi_sharp_pdata->backlight_level(mfd->bl_level,
+							  max,
+							  min);
+
+		if (level < 0)
+			return;
+
+		/* use Rodem GPIO(2:0) to give 8 levels of backlight (7-0) */
+		/* Set lower 3 GPIOs as Outputs (set to 0) */
+		mddi_queue_register_read(REG_GIOA, &regdata, TRUE, 0);
+		mddi_queue_register_write(REG_GIOA, regdata & 0xfff8, TRUE, 0);
+
+		/* Set lower 3 GPIOs as level */
+		mddi_queue_register_read(REG_GIOD, &regdata, TRUE, 0);
+		mddi_queue_register_write(REG_GIOD,
+			  (regdata & 0xfff8) | (0x07 & level), TRUE, 0);
+	}
+}
+
+static void mddi_sharp_prim_lcd_init(void)
+{
+	mddi_queue_register_write(REG_SYSCTL, 0x4000, TRUE, 0);
+	mddi_wait(1);
+	mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+	mddi_wait(5);
+	mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+	mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+
+	/* new reg write below */
+	if (mddi_sharp_debug_60hz_refresh)
+		mddi_queue_register_write(REG_CLKCNF, 0x070d, FALSE, 0);
+	else
+		mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+
+	mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+	mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+	mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+	mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+	mddi_queue_register_write(REG_PTHW, 240, FALSE, 0);
+	if (mddi_sharp_debug_60hz_refresh)
+		mddi_queue_register_write(REG_PTHF, 12, FALSE, 0);
+	else
+		mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+
+	mddi_wait(1);
+
+	mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+	mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+	mddi_queue_register_write(REG_PTVW, 320, FALSE, 0);
+	mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+	mddi_wait(1);
+
+	/* vram_color set REG_AGM???? */
+	mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+	mddi_queue_register_write(REG_SSDCTL, 0x0000, FALSE, 0);
+	mddi_queue_register_write(REG_SSDCTL, 0x0001, TRUE, 0);
+	mddi_wait(1);
+	mddi_queue_register_write(REG_PSTCTL1, 0x0001, TRUE, 0);
+	mddi_wait(10);
+
+	serigo(0x0701);
+	/* software reset */
+	mddi_wait(1);
+	/* Wait over 50us */
+
+	serigo(0x0400);
+	/* DCLK~ACHSYNC~ACVSYNC polarity setting */
+	serigo(0x2900);
+	/* EEPROM start read address setting */
+	serigo(0x2606);
+	/* EEPROM start read register setting */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x0503);
+	/* Horizontal timing setting */
+	serigo(0x062C);
+	/* Veritical timing setting */
+	serigo(0x2001);
+	/* power initialize setting(VDC2) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2120);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2130);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x2132);
+	/* Initialize power setting(CPS) */
+	mddi_wait(10);
+	/* Wait over 10ms */
+
+	serigo(0x2133);
+	/* Initialize power setting(CPS) */
+	mddi_wait(20);
+	/* Wait over 20ms */
+
+	serigo(0x0200);
+	/* Panel initialize release(INIT) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	serigo(0x0131);
+	/* Panel setting(CPS) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	mddi_queue_register_write(REG_PSTCTL1, 0x0003, TRUE, 0);
+
+	/* if (FFA LCD is upside down) -> serigo(0x0100); */
+	serigo(0x0130);
+
+	/* Black mask release(display ON) */
+	mddi_wait(1);
+	/* Wait over 1ms */
+
+	if (mddi_sharp_vsync_wake) {
+		mddi_queue_register_write(REG_VBLKS, 0x1001, TRUE, 0);
+		mddi_queue_register_write(REG_VBLKE, 0x1002, TRUE, 0);
+	}
+
+	/* Set the MDP pixel data attributes for Primary Display */
+	mddi_host_write_pix_attr_reg(0x00C3);
+	return;
+
+}
+
+void mddi_sharp_sub_lcd_init(void)
+{
+
+	mddi_queue_register_write(REG_SYSCTL, 0x4000, FALSE, 0);
+	mddi_queue_register_write(REG_SYSCTL, 0x0000, TRUE, 0);
+	mddi_wait(100);
+
+	mddi_queue_register_write(REG_SYSCTL, 0x0001, FALSE, 0);
+	mddi_queue_register_write(REG_CLKDIV1, 0x000b, FALSE, 0);
+	mddi_queue_register_write(REG_CLKCNF, 0x0708, FALSE, 0);
+	mddi_queue_register_write(REG_SYSCTL, 0x0201, FALSE, 0);
+	mddi_queue_register_write(REG_PTGCTL, 0x0010, FALSE, 0);
+	mddi_queue_register_write(REG_PTHP, 4, FALSE, 0);
+	mddi_queue_register_write(REG_PTHB, 40, FALSE, 0);
+	mddi_queue_register_write(REG_PTHW, 128, FALSE, 0);
+	mddi_queue_register_write(REG_PTHF, 92, FALSE, 0);
+	mddi_queue_register_write(REG_PTVP, 1, FALSE, 0);
+	mddi_queue_register_write(REG_PTVB, 2, FALSE, 0);
+	mddi_queue_register_write(REG_PTVW, 128, FALSE, 0);
+	mddi_queue_register_write(REG_PTVF, 15, FALSE, 0);
+
+	/* Now the sub display..... */
+	/* Reset High */
+	mddi_queue_register_write(REG_SUBCTL, 0x0200, FALSE, 0);
+	/* CS=1,RD=1,WE=1,RS=1 */
+	mddi_queue_register_write(REG_SUBTCMD, 0x000f, TRUE, 0);
+	mddi_wait(1);
+	/* Wait 5us */
+
+	if (sharp_subpanel_type == SHARP_SUB_UNKNOWN) {
+		uint32 data;
+
+		sub_through_write(1, 0x05);
+		sub_through_write(1, 0x6A);
+		sub_through_write(1, 0x1D);
+		sub_through_write(1, 0x05);
+		data = sub_through_read(1);
+		if (data == 0x6A) {
+			sharp_subpanel_type = SHARP_SUB_HYNIX;
+		} else {
+			sub_through_write(0, 0x36);
+			sub_through_write(1, 0xA8);
+			sub_through_write(0, 0x09);
+			data = sub_through_read(1);
+			data = sub_through_read(1);
+			if (data == 0x54) {
+				sub_through_write(0, 0x36);
+				sub_through_write(1, 0x00);
+				sharp_subpanel_type = SHARP_SUB_ROHM;
+			}
+		}
+	}
+
+	if (sharp_subpanel_type == SHARP_SUB_HYNIX) {
+		sub_through_write(1, 0x00);	/* Display setting 1 */
+		sub_through_write(1, 0x04);
+		sub_through_write(1, 0x01);
+		sub_through_write(1, 0x05);
+		sub_through_write(1, 0x0280);
+		sub_through_write(1, 0x0301);
+		sub_through_write(1, 0x0402);
+		sub_through_write(1, 0x0500);
+		sub_through_write(1, 0x0681);
+		sub_through_write(1, 0x077F);
+		sub_through_write(1, 0x08C0);
+		sub_through_write(1, 0x0905);
+		sub_through_write(1, 0x0A02);
+		sub_through_write(1, 0x0B00);
+		sub_through_write(1, 0x0C00);
+		sub_through_write(1, 0x0D00);
+		sub_through_write(1, 0x0E00);
+		sub_through_write(1, 0x0F00);
+
+		sub_through_write(1, 0x100B);	/* Display setting 2 */
+		sub_through_write(1, 0x1103);
+		sub_through_write(1, 0x1237);
+		sub_through_write(1, 0x1300);
+		sub_through_write(1, 0x1400);
+		sub_through_write(1, 0x1500);
+		sub_through_write(1, 0x1605);
+		sub_through_write(1, 0x1700);
+		sub_through_write(1, 0x1800);
+		sub_through_write(1, 0x192E);
+		sub_through_write(1, 0x1A00);
+		sub_through_write(1, 0x1B00);
+		sub_through_write(1, 0x1C00);
+
+		sub_through_write(1, 0x151A);	/* Power setting */
+
+		sub_through_write(1, 0x2002);	/* Gradation Palette setting */
+		sub_through_write(1, 0x2107);
+		sub_through_write(1, 0x220C);
+		sub_through_write(1, 0x2310);
+		sub_through_write(1, 0x2414);
+		sub_through_write(1, 0x2518);
+		sub_through_write(1, 0x261C);
+		sub_through_write(1, 0x2720);
+		sub_through_write(1, 0x2824);
+		sub_through_write(1, 0x2928);
+		sub_through_write(1, 0x2A2B);
+		sub_through_write(1, 0x2B2E);
+		sub_through_write(1, 0x2C31);
+		sub_through_write(1, 0x2D34);
+		sub_through_write(1, 0x2E37);
+		sub_through_write(1, 0x2F3A);
+		sub_through_write(1, 0x303C);
+		sub_through_write(1, 0x313E);
+		sub_through_write(1, 0x323F);
+		sub_through_write(1, 0x3340);
+		sub_through_write(1, 0x3441);
+		sub_through_write(1, 0x3543);
+		sub_through_write(1, 0x3646);
+		sub_through_write(1, 0x3749);
+		sub_through_write(1, 0x384C);
+		sub_through_write(1, 0x394F);
+		sub_through_write(1, 0x3A52);
+		sub_through_write(1, 0x3B59);
+		sub_through_write(1, 0x3C60);
+		sub_through_write(1, 0x3D67);
+		sub_through_write(1, 0x3E6E);
+		sub_through_write(1, 0x3F7F);
+		sub_through_write(1, 0x4001);
+		sub_through_write(1, 0x4107);
+		sub_through_write(1, 0x420C);
+		sub_through_write(1, 0x4310);
+		sub_through_write(1, 0x4414);
+		sub_through_write(1, 0x4518);
+		sub_through_write(1, 0x461C);
+		sub_through_write(1, 0x4720);
+		sub_through_write(1, 0x4824);
+		sub_through_write(1, 0x4928);
+		sub_through_write(1, 0x4A2B);
+		sub_through_write(1, 0x4B2E);
+		sub_through_write(1, 0x4C31);
+		sub_through_write(1, 0x4D34);
+		sub_through_write(1, 0x4E37);
+		sub_through_write(1, 0x4F3A);
+		sub_through_write(1, 0x503C);
+		sub_through_write(1, 0x513E);
+		sub_through_write(1, 0x523F);
+		sub_through_write(1, 0x5340);
+		sub_through_write(1, 0x5441);
+		sub_through_write(1, 0x5543);
+		sub_through_write(1, 0x5646);
+		sub_through_write(1, 0x5749);
+		sub_through_write(1, 0x584C);
+		sub_through_write(1, 0x594F);
+		sub_through_write(1, 0x5A52);
+		sub_through_write(1, 0x5B59);
+		sub_through_write(1, 0x5C60);
+		sub_through_write(1, 0x5D67);
+		sub_through_write(1, 0x5E6E);
+		sub_through_write(1, 0x5F7E);
+		sub_through_write(1, 0x6000);
+		sub_through_write(1, 0x6107);
+		sub_through_write(1, 0x620C);
+		sub_through_write(1, 0x6310);
+		sub_through_write(1, 0x6414);
+		sub_through_write(1, 0x6518);
+		sub_through_write(1, 0x661C);
+		sub_through_write(1, 0x6720);
+		sub_through_write(1, 0x6824);
+		sub_through_write(1, 0x6928);
+		sub_through_write(1, 0x6A2B);
+		sub_through_write(1, 0x6B2E);
+		sub_through_write(1, 0x6C31);
+		sub_through_write(1, 0x6D34);
+		sub_through_write(1, 0x6E37);
+		sub_through_write(1, 0x6F3A);
+		sub_through_write(1, 0x703C);
+		sub_through_write(1, 0x713E);
+		sub_through_write(1, 0x723F);
+		sub_through_write(1, 0x7340);
+		sub_through_write(1, 0x7441);
+		sub_through_write(1, 0x7543);
+		sub_through_write(1, 0x7646);
+		sub_through_write(1, 0x7749);
+		sub_through_write(1, 0x784C);
+		sub_through_write(1, 0x794F);
+		sub_through_write(1, 0x7A52);
+		sub_through_write(1, 0x7B59);
+		sub_through_write(1, 0x7C60);
+		sub_through_write(1, 0x7D67);
+		sub_through_write(1, 0x7E6E);
+		sub_through_write(1, 0x7F7D);
+
+		sub_through_write(1, 0x1851);	/* Display on */
+
+		mddi_queue_register_write(REG_AGM, 0x0000, TRUE, 0);
+
+		/* 1 pixel / 1 post clock */
+		mddi_queue_register_write(REG_CLKDIV2, 0x3b00, FALSE, 0);
+
+		/* SUB LCD select */
+		mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+		/* RS=0,command initiate number=0,select master mode */
+		mddi_queue_register_write(REG_SUBCTL, 0x0202, FALSE, 0);
+
+		/* Sub LCD Data transform start */
+		mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+	} else if (sharp_subpanel_type == SHARP_SUB_ROHM) {
+
+		sub_through_write(0, 0x01);	/* Display setting */
+		sub_through_write(1, 0x00);
+
+		mddi_wait(1);
+		/* Wait 100us  <----- ******* Update 2005/01/24 */
+
+		sub_through_write(0, 0xB6);
+		sub_through_write(1, 0x0C);
+		sub_through_write(1, 0x4A);
+		sub_through_write(1, 0x20);
+		sub_through_write(0, 0x3A);
+		sub_through_write(1, 0x05);
+		sub_through_write(0, 0xB7);
+		sub_through_write(1, 0x01);
+		sub_through_write(0, 0xBA);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x02);
+		sub_through_write(0, 0x25);
+		sub_through_write(1, 0x4F);
+		sub_through_write(0, 0xBB);
+		sub_through_write(1, 0x00);
+		sub_through_write(0, 0x36);
+		sub_through_write(1, 0x00);
+		sub_through_write(0, 0xB1);
+		sub_through_write(1, 0x05);
+		sub_through_write(0, 0xBE);
+		sub_through_write(1, 0x80);
+		sub_through_write(0, 0x26);
+		sub_through_write(1, 0x01);
+		sub_through_write(0, 0x2A);
+		sub_through_write(1, 0x02);
+		sub_through_write(1, 0x81);
+		sub_through_write(0, 0x2B);
+		sub_through_write(1, 0x00);
+		sub_through_write(1, 0x7F);
+
+		sub_through_write(0, 0x2C);
+		sub_through_write(0, 0x11);	/* Sleep mode off */
+
+		mddi_wait(1);
+		/* Wait 100 ms <----- ******* Update 2005/01/24 */
+
+		sub_through_write(0, 0x29);	/* Display on */
+		sub_through_write(0, 0xB3);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0xAA);
+		sub_through_write(1, 0xA0);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x30);
+		sub_through_write(1, 0xA6);
+		sub_through_write(1, 0xFF);
+		sub_through_write(1, 0x9A);
+		sub_through_write(1, 0x9F);
+		sub_through_write(1, 0xAF);
+		sub_through_write(1, 0xBC);
+		sub_through_write(1, 0xCF);
+		sub_through_write(1, 0xDF);
+		sub_through_write(1, 0x20);
+		sub_through_write(1, 0x9C);
+		sub_through_write(1, 0x8A);
+
+		sub_through_write(0, 0x002C);	/* Display on */
+
+		/* 1 pixel / 2 post clock */
+		mddi_queue_register_write(REG_CLKDIV2, 0x7b00, FALSE, 0);
+
+		/* SUB LCD select */
+		mddi_queue_register_write(REG_PSTCTL2, 0x0080, FALSE, 0);
+
+		/* RS=1,command initiate number=0,select master mode */
+		mddi_queue_register_write(REG_SUBCTL, 0x0242, FALSE, 0);
+
+		/* Sub LCD Data transform start */
+		mddi_queue_register_write(REG_PSTCTL1, 0x0003, FALSE, 0);
+
+	}
+
+	/* Set the MDP pixel data attributes for Sub Display */
+	mddi_host_write_pix_attr_reg(0x00C0);
+}
+
+void mddi_sharp_lcd_vsync_detected(boolean detected)
+{
+	/* static timetick_type start_time = 0; */
+	static struct timeval start_time;
+	static boolean first_time = TRUE;
+	/* uint32 mdp_cnt_val = 0; */
+	/* timetick_type elapsed_us; */
+	struct timeval now;
+	uint32 elapsed_us;
+	uint32 num_vsyncs;
+
+	if ((detected) || (mddi_sharp_vsync_attempts > 5)) {
+		if ((detected) && (mddi_sharp_monitor_refresh_value)) {
+			/* if (start_time != 0) */
+			if (!first_time) {
+				jiffies_to_timeval(jiffies, &now);
+				elapsed_us =
+				    (now.tv_sec - start_time.tv_sec) * 1000000 +
+				    now.tv_usec - start_time.tv_usec;
+				/*
+				* LCD is configured for a refresh every usecs,
+				* so to determine the number of vsyncs that
+				* have occurred since the last measurement add
+				* half that to the time difference and divide
+				* by the refresh rate.
+				*/
+				num_vsyncs = (elapsed_us +
+					      (mddi_sharp_usecs_per_refresh >>
+					       1)) /
+				    mddi_sharp_usecs_per_refresh;
+				/*
+				 * LCD is configured for * hsyncs (rows) per
+				 * refresh cycle. Calculate new rows_per_second
+				 * value based upon these new measurements.
+				 * MDP can update with this new value.
+				 */
+				mddi_sharp_rows_per_second =
+				    (mddi_sharp_rows_per_refresh * 1000 *
+				     num_vsyncs) / (elapsed_us / 1000);
+			}
+			/* start_time = timetick_get(); */
+			first_time = FALSE;
+			jiffies_to_timeval(jiffies, &start_time);
+			if (mddi_sharp_report_refresh_measurements) {
+				/* mdp_cnt_val = MDP_LINE_COUNT; */
+			}
+		}
+		/* if detected = TRUE, client initiated wakeup was detected */
+		if (mddi_sharp_vsync_handler != NULL) {
+			(*mddi_sharp_vsync_handler)
+			    (mddi_sharp_vsync_handler_arg);
+			mddi_sharp_vsync_handler = NULL;
+		}
+		mddi_vsync_detect_enabled = FALSE;
+		mddi_sharp_vsync_attempts = 0;
+		/* need to clear this vsync wakeup */
+		if (!mddi_queue_register_write_int(REG_INTR, 0x0000)) {
+			MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+		}
+		if (!detected) {
+			/* give up after 5 failed attempts but show error */
+			MDDI_MSG_NOTICE("Vsync detection failed!\n");
+		} else if ((mddi_sharp_monitor_refresh_value) &&
+			(mddi_sharp_report_refresh_measurements)) {
+			MDDI_MSG_NOTICE("  Lines Per Second=%d!\n",
+				mddi_sharp_rows_per_second);
+		}
+	} else
+		/* if detected = FALSE, we woke up from hibernation, but did not
+		 * detect client initiated wakeup.
+		 */
+		mddi_sharp_vsync_attempts++;
+}
+
+/* ISR to be executed */
+void mddi_sharp_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg)
+{
+	boolean error = FALSE;
+	unsigned long flags;
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	/* INTLOCK(); */
+
+	if (mddi_sharp_vsync_handler != NULL)
+		error = TRUE;
+
+	/* Register the handler for this particular GROUP interrupt source */
+	mddi_sharp_vsync_handler = handler;
+	mddi_sharp_vsync_handler_arg = arg;
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+	/* INTFREE(); */
+
+	if (error)
+		MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+
+	/* Enable the vsync wakeup */
+	mddi_queue_register_write(REG_INTR, 0x8100, FALSE, 0);
+
+	mddi_sharp_vsync_attempts = 1;
+	mddi_vsync_detect_enabled = TRUE;
+}				/* mddi_sharp_vsync_set_handler */
+
+static int mddi_sharp_lcd_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (mfd->panel.id == SHARP_QVGA_PRIM)
+		mddi_sharp_prim_lcd_init();
+	else
+		mddi_sharp_sub_lcd_init();
+
+	return 0;
+}
+
+static int mddi_sharp_lcd_off(struct platform_device *pdev)
+{
+	mddi_sharp_lcd_powerdown();
+	return 0;
+}
+
+static int __init mddi_sharp_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		mddi_sharp_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_sharp_probe,
+	.driver = {
+		.name   = "mddi_sharp_qvga",
+	},
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data0 = {
+	.on = mddi_sharp_lcd_on,
+	.off = mddi_sharp_lcd_off,
+	.set_backlight = mddi_sharp_lcd_set_backlight,
+	.set_vsync_notifier = mddi_sharp_vsync_set_handler,
+};
+
+static struct platform_device this_device_0 = {
+	.name   = "mddi_sharp_qvga",
+	.id	= SHARP_QVGA_PRIM,
+	.dev	= {
+		.platform_data = &mddi_sharp_panel_data0,
+	}
+};
+
+static struct msm_fb_panel_data mddi_sharp_panel_data1 = {
+	.on = mddi_sharp_lcd_on,
+	.off = mddi_sharp_lcd_off,
+};
+
+static struct platform_device this_device_1 = {
+	.name   = "mddi_sharp_qvga",
+	.id	= SHARP_128X128_SECD,
+	.dev	= {
+		.platform_data = &mddi_sharp_panel_data1,
+	}
+};
+
+static int __init mddi_sharp_init(void)
+{
+	int ret;
+	struct msm_panel_info *pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_sharp_qvga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+
+		if (((id >> 16) != 0x0) || ((id & 0xffff) != 0x8835))
+			return 0;
+	}
+#endif
+	if (mddi_host_core_version > 8) {
+		/* can use faster refresh with newer hw revisions */
+		mddi_sharp_debug_60hz_refresh = TRUE;
+
+		/* Timing variables for tracking vsync */
+		/* dot_clock = 6.00MHz
+		 * horizontal count = 296
+		 * vertical count = 338
+		 * refresh rate = 6000000/(296+338) = 60Hz
+		 */
+		mddi_sharp_rows_per_second = 20270;	/* 6000000/296 */
+		mddi_sharp_rows_per_refresh = 338;
+		mddi_sharp_usecs_per_refresh = 16674;	/* (296+338)/6000000 */
+	} else {
+		/* Timing variables for tracking vsync */
+		/* dot_clock = 5.20MHz
+		 * horizontal count = 376
+		 * vertical count = 338
+		 * refresh rate = 5200000/(376+338) = 41Hz
+		 */
+		mddi_sharp_rows_per_second = 13830;	/* 5200000/376 */
+		mddi_sharp_rows_per_refresh = 338;
+		mddi_sharp_usecs_per_refresh = 24440;	/* (376+338)/5200000 */
+	}
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		pinfo = &mddi_sharp_panel_data0.panel_info;
+		pinfo->xres = 240;
+		pinfo->yres = 320;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_1;
+		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->fb_num = 2;
+		pinfo->clk_rate = 122880000;
+		pinfo->clk_min = 120000000;
+		pinfo->clk_max = 125000000;
+		pinfo->lcd.vsync_enable = TRUE;
+		pinfo->lcd.refx100 =
+			(mddi_sharp_rows_per_second * 100) /
+			mddi_sharp_rows_per_refresh;
+		pinfo->lcd.v_back_porch = 12;
+		pinfo->lcd.v_front_porch = 6;
+		pinfo->lcd.v_pulse_width = 0;
+		pinfo->lcd.hw_vsync_mode = FALSE;
+		pinfo->lcd.vsync_notifier_period = (1 * HZ);
+		pinfo->bl_max = 7;
+		pinfo->bl_min = 1;
+
+		ret = platform_device_register(&this_device_0);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+
+		pinfo = &mddi_sharp_panel_data1.panel_info;
+		pinfo->xres = 128;
+		pinfo->yres = 128;
+		pinfo->type = MDDI_PANEL;
+		pinfo->pdest = DISPLAY_2;
+		pinfo->mddi.vdopkt = 0x400;
+		pinfo->wait_cycle = 0;
+		pinfo->bpp = 18;
+		pinfo->clk_rate = 122880000;
+		pinfo->clk_min = 120000000;
+		pinfo->clk_max = 125000000;
+		pinfo->fb_num = 2;
+
+		ret = platform_device_register(&this_device_1);
+		if (ret) {
+			platform_device_unregister(&this_device_0);
+			platform_driver_unregister(&this_driver);
+		}
+	}
+
+	if (!ret)
+		mddi_lcd.vsync_detected = mddi_sharp_lcd_vsync_detected;
+
+	return ret;
+}
+
+module_init(mddi_sharp_init);
diff --git a/drivers/staging/msm/mddi_toshiba.c b/drivers/staging/msm/mddi_toshiba.c
new file mode 100644
index 0000000..e96342d
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.c
@@ -0,0 +1,1741 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+#define TM_GET_DID(id) ((id) & 0xff)
+#define TM_GET_PID(id) (((id) & 0xff00)>>8)
+
+#define MDDI_CLIENT_CORE_BASE  0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE         0x120000
+#define PWM_BLOCK_BASE         0x140000
+#define SYSTEM_BLOCK1_BASE     0x160000
+
+#define TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
+#define DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
+#define DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
+#define DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
+#define SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
+
+#define BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
+#define BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
+#define BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
+#define BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
+#define BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
+
+#define SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
+#define PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
+#define START       (LCD_CONTROL_BLOCK_BASE|0x08)
+#define PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
+
+#define INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
+#define INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
+
+#define PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
+#define HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
+#define HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
+#define HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
+#define VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
+#define VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
+#define VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
+#define WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
+#define REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
+#define WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
+#define RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
+#define ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
+#define ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
+#define ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
+#define ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
+#define ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
+#define ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
+#define ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
+#define MONI        (LCD_CONTROL_BLOCK_BASE|0xB0)
+#define VPOS        (LCD_CONTROL_BLOCK_BASE|0xC0)
+
+#define SSICTL      (SPI_BLOCK_BASE|0x00)
+#define SSITIME     (SPI_BLOCK_BASE|0x04)
+#define SSITX       (SPI_BLOCK_BASE|0x08)
+#define SSIINTS     (SPI_BLOCK_BASE|0x14)
+
+#define TIMER0LOAD    (PWM_BLOCK_BASE|0x00)
+#define TIMER0CTRL    (PWM_BLOCK_BASE|0x08)
+#define PWM0OFF       (PWM_BLOCK_BASE|0x1C)
+#define TIMER1LOAD    (PWM_BLOCK_BASE|0x20)
+#define TIMER1CTRL    (PWM_BLOCK_BASE|0x28)
+#define PWM1OFF       (PWM_BLOCK_BASE|0x3C)
+#define TIMER2LOAD    (PWM_BLOCK_BASE|0x40)
+#define TIMER2CTRL    (PWM_BLOCK_BASE|0x48)
+#define PWM2OFF       (PWM_BLOCK_BASE|0x5C)
+#define PWMCR         (PWM_BLOCK_BASE|0x68)
+
+#define GPIOIS      (GPIO_BLOCK_BASE|0x08)
+#define GPIOIEV     (GPIO_BLOCK_BASE|0x10)
+#define GPIOIC      (GPIO_BLOCK_BASE|0x20)
+
+#define WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
+#define CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
+#define DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
+#define INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
+#define CNT_DIS     (SYSTEM_BLOCK1_BASE|0x10)
+
+typedef enum {
+	TOSHIBA_STATE_OFF,
+	TOSHIBA_STATE_PRIM_SEC_STANDBY,
+	TOSHIBA_STATE_PRIM_SEC_READY,
+	TOSHIBA_STATE_PRIM_NORMAL_MODE,
+	TOSHIBA_STATE_SEC_NORMAL_MODE
+} mddi_toshiba_state_t;
+
+static uint32 mddi_toshiba_curr_vpos;
+static boolean mddi_toshiba_monitor_refresh_value = FALSE;
+static boolean mddi_toshiba_report_refresh_measurements = FALSE;
+
+boolean mddi_toshiba_61Hz_refresh = TRUE;
+
+/* Modifications to timing to increase refresh rate to > 60Hz.
+ *   20MHz dot clock.
+ *   646 total rows.
+ *   506 total columns.
+ *   refresh rate = 61.19Hz
+ */
+static uint32 mddi_toshiba_rows_per_second = 39526;
+static uint32 mddi_toshiba_usecs_per_refresh = 16344;
+static uint32 mddi_toshiba_rows_per_refresh = 646;
+extern boolean mddi_vsync_detect_enabled;
+
+static msm_fb_vsync_handler_type mddi_toshiba_vsync_handler;
+static void *mddi_toshiba_vsync_handler_arg;
+static uint16 mddi_toshiba_vsync_attempts;
+
+static mddi_toshiba_state_t toshiba_state = TOSHIBA_STATE_OFF;
+
+static struct msm_panel_common_pdata *mddi_toshiba_pdata;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev);
+static int mddi_toshiba_lcd_off(struct platform_device *pdev);
+
+static void mddi_toshiba_state_transition(mddi_toshiba_state_t a,
+					  mddi_toshiba_state_t b)
+{
+	if (toshiba_state != a) {
+		MDDI_MSG_ERR("toshiba state trans. (%d->%d) found %d\n", a, b,
+			     toshiba_state);
+	}
+	toshiba_state = b;
+}
+
+#define GORDON_REG_IMGCTL1      0x10	/* Image interface control 1   */
+#define GORDON_REG_IMGCTL2      0x11	/* Image interface control 2   */
+#define GORDON_REG_IMGSET1      0x12	/* Image interface settings 1  */
+#define GORDON_REG_IMGSET2      0x13	/* Image interface settings 2  */
+#define GORDON_REG_IVBP1        0x14	/* DM0: Vert back porch        */
+#define GORDON_REG_IHBP1        0x15	/* DM0: Horiz back porch       */
+#define GORDON_REG_IVNUM1       0x16	/* DM0: Num of vert lines      */
+#define GORDON_REG_IHNUM1       0x17	/* DM0: Num of pixels per line */
+#define GORDON_REG_IVBP2        0x18	/* DM1: Vert back porch        */
+#define GORDON_REG_IHBP2        0x19	/* DM1: Horiz back porch       */
+#define GORDON_REG_IVNUM2       0x1A	/* DM1: Num of vert lines      */
+#define GORDON_REG_IHNUM2       0x1B	/* DM1: Num of pixels per line */
+#define GORDON_REG_LCDIFCTL1    0x30	/* LCD interface control 1     */
+#define GORDON_REG_VALTRAN      0x31	/* LCD IF ctl: VALTRAN sync flag */
+#define GORDON_REG_AVCTL        0x33
+#define GORDON_REG_LCDIFCTL2    0x34	/* LCD interface control 2     */
+#define GORDON_REG_LCDIFCTL3    0x35	/* LCD interface control 3     */
+#define GORDON_REG_LCDIFSET1    0x36	/* LCD interface settings 1    */
+#define GORDON_REG_PCCTL        0x3C
+#define GORDON_REG_TPARAM1      0x40
+#define GORDON_REG_TLCDIF1      0x41
+#define GORDON_REG_TSSPB_ST1    0x42
+#define GORDON_REG_TSSPB_ED1    0x43
+#define GORDON_REG_TSCK_ST1     0x44
+#define GORDON_REG_TSCK_WD1     0x45
+#define GORDON_REG_TGSPB_VST1   0x46
+#define GORDON_REG_TGSPB_VED1   0x47
+#define GORDON_REG_TGSPB_CH1    0x48
+#define GORDON_REG_TGCK_ST1     0x49
+#define GORDON_REG_TGCK_ED1     0x4A
+#define GORDON_REG_TPCTL_ST1    0x4B
+#define GORDON_REG_TPCTL_ED1    0x4C
+#define GORDON_REG_TPCHG_ED1    0x4D
+#define GORDON_REG_TCOM_CH1     0x4E
+#define GORDON_REG_THBP1        0x4F
+#define GORDON_REG_TPHCTL1      0x50
+#define GORDON_REG_EVPH1        0x51
+#define GORDON_REG_EVPL1        0x52
+#define GORDON_REG_EVNH1        0x53
+#define GORDON_REG_EVNL1        0x54
+#define GORDON_REG_TBIAS1       0x55
+#define GORDON_REG_TPARAM2      0x56
+#define GORDON_REG_TLCDIF2      0x57
+#define GORDON_REG_TSSPB_ST2    0x58
+#define GORDON_REG_TSSPB_ED2    0x59
+#define GORDON_REG_TSCK_ST2     0x5A
+#define GORDON_REG_TSCK_WD2     0x5B
+#define GORDON_REG_TGSPB_VST2   0x5C
+#define GORDON_REG_TGSPB_VED2   0x5D
+#define GORDON_REG_TGSPB_CH2    0x5E
+#define GORDON_REG_TGCK_ST2     0x5F
+#define GORDON_REG_TGCK_ED2     0x60
+#define GORDON_REG_TPCTL_ST2    0x61
+#define GORDON_REG_TPCTL_ED2    0x62
+#define GORDON_REG_TPCHG_ED2    0x63
+#define GORDON_REG_TCOM_CH2     0x64
+#define GORDON_REG_THBP2        0x65
+#define GORDON_REG_TPHCTL2      0x66
+#define GORDON_REG_EVPH2        0x67
+#define GORDON_REG_EVPL2        0x68
+#define GORDON_REG_EVNH2        0x69
+#define GORDON_REG_EVNL2        0x6A
+#define GORDON_REG_TBIAS2       0x6B
+#define GORDON_REG_POWCTL       0x80
+#define GORDON_REG_POWOSC1      0x81
+#define GORDON_REG_POWOSC2      0x82
+#define GORDON_REG_POWSET       0x83
+#define GORDON_REG_POWTRM1      0x85
+#define GORDON_REG_POWTRM2      0x86
+#define GORDON_REG_POWTRM3      0x87
+#define GORDON_REG_POWTRMSEL    0x88
+#define GORDON_REG_POWHIZ       0x89
+
+void serigo(uint16 reg, uint8 data)
+{
+	uint32 mddi_val = 0;
+	mddi_queue_register_read(SSIINTS, &mddi_val, TRUE, 0);
+	if (mddi_val & (1 << 8))
+		mddi_wait(1);
+	/* No De-assert of CS and send 2 bytes */
+	mddi_val = 0x90000 | ((0x00FF & reg) << 8) | data;
+	mddi_queue_register_write(SSITX, mddi_val, TRUE, 0);
+}
+
+void gordon_init(void)
+{
+       /* Image interface settings ***/
+	serigo(GORDON_REG_IMGCTL2, 0x00);
+	serigo(GORDON_REG_IMGSET1, 0x01);
+
+	/* Exchange the RGB signal for J510(Softbank mobile) */
+	serigo(GORDON_REG_IMGSET2, 0x12);
+	serigo(GORDON_REG_LCDIFSET1, 0x00);
+	mddi_wait(2);
+
+	/* Pre-charge settings */
+	serigo(GORDON_REG_PCCTL, 0x09);
+	serigo(GORDON_REG_LCDIFCTL2, 0x1B);
+	mddi_wait(1);
+}
+
+void gordon_disp_on(void)
+{
+	/*gordon_dispmode setting */
+	/*VGA settings */
+	serigo(GORDON_REG_TPARAM1, 0x30);
+	serigo(GORDON_REG_TLCDIF1, 0x00);
+	serigo(GORDON_REG_TSSPB_ST1, 0x8B);
+	serigo(GORDON_REG_TSSPB_ED1, 0x93);
+	mddi_wait(2);
+	serigo(GORDON_REG_TSCK_ST1, 0x88);
+	serigo(GORDON_REG_TSCK_WD1, 0x00);
+	serigo(GORDON_REG_TGSPB_VST1, 0x01);
+	serigo(GORDON_REG_TGSPB_VED1, 0x02);
+	mddi_wait(2);
+	serigo(GORDON_REG_TGSPB_CH1, 0x5E);
+	serigo(GORDON_REG_TGCK_ST1, 0x80);
+	serigo(GORDON_REG_TGCK_ED1, 0x3C);
+	serigo(GORDON_REG_TPCTL_ST1, 0x50);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPCTL_ED1, 0x74);
+	serigo(GORDON_REG_TPCHG_ED1, 0x78);
+	serigo(GORDON_REG_TCOM_CH1, 0x50);
+	serigo(GORDON_REG_THBP1, 0x84);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPHCTL1, 0x00);
+	serigo(GORDON_REG_EVPH1, 0x70);
+	serigo(GORDON_REG_EVPL1, 0x64);
+	serigo(GORDON_REG_EVNH1, 0x56);
+	mddi_wait(2);
+	serigo(GORDON_REG_EVNL1, 0x48);
+	serigo(GORDON_REG_TBIAS1, 0x88);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPARAM2, 0x28);
+	serigo(GORDON_REG_TLCDIF2, 0x14);
+	serigo(GORDON_REG_TSSPB_ST2, 0x49);
+	serigo(GORDON_REG_TSSPB_ED2, 0x4B);
+	mddi_wait(2);
+	serigo(GORDON_REG_TSCK_ST2, 0x4A);
+	serigo(GORDON_REG_TSCK_WD2, 0x02);
+	serigo(GORDON_REG_TGSPB_VST2, 0x02);
+	serigo(GORDON_REG_TGSPB_VED2, 0x03);
+	mddi_wait(2);
+	serigo(GORDON_REG_TGSPB_CH2, 0x2F);
+	serigo(GORDON_REG_TGCK_ST2, 0x40);
+	serigo(GORDON_REG_TGCK_ED2, 0x1E);
+	serigo(GORDON_REG_TPCTL_ST2, 0x2C);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPCTL_ED2, 0x3A);
+	serigo(GORDON_REG_TPCHG_ED2, 0x3C);
+	serigo(GORDON_REG_TCOM_CH2, 0x28);
+	serigo(GORDON_REG_THBP2, 0x4D);
+	mddi_wait(2);
+	serigo(GORDON_REG_TPHCTL2, 0x1A);
+	mddi_wait(2);
+	serigo(GORDON_REG_IVBP1, 0x02);
+	serigo(GORDON_REG_IHBP1, 0x90);
+	serigo(GORDON_REG_IVNUM1, 0xA0);
+	serigo(GORDON_REG_IHNUM1, 0x78);
+	mddi_wait(2);
+	serigo(GORDON_REG_IVBP2, 0x02);
+	serigo(GORDON_REG_IHBP2, 0x48);
+	serigo(GORDON_REG_IVNUM2, 0x50);
+	serigo(GORDON_REG_IHNUM2, 0x3C);
+	mddi_wait(2);
+	serigo(GORDON_REG_POWCTL, 0x03);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x07);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x0F);
+	mddi_wait(15);
+	serigo(GORDON_REG_AVCTL, 0x03);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x1F);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x5F);
+	mddi_wait(15);
+	serigo(GORDON_REG_POWCTL, 0x7F);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL1, 0x02);
+	mddi_wait(15);
+	serigo(GORDON_REG_IMGCTL1, 0x00);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL3, 0x00);
+	mddi_wait(15);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	mddi_wait(15);
+	serigo(GORDON_REG_LCDIFCTL1, 0x03);
+	serigo(GORDON_REG_LCDIFCTL1, 0x03);
+	mddi_wait(1);
+}
+
+void gordon_disp_off(void)
+{
+	serigo(GORDON_REG_LCDIFCTL2, 0x7B);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	serigo(GORDON_REG_LCDIFCTL1, 0x02);
+	serigo(GORDON_REG_LCDIFCTL3, 0x01);
+	mddi_wait(20);
+	serigo(GORDON_REG_VALTRAN, 0x01);
+	serigo(GORDON_REG_IMGCTL1, 0x01);
+	serigo(GORDON_REG_LCDIFCTL1, 0x00);
+	mddi_wait(20);
+	serigo(GORDON_REG_POWCTL, 0x1F);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x07);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x03);
+	mddi_wait(40);
+	serigo(GORDON_REG_POWCTL, 0x00);
+	mddi_wait(40);
+}
+
+void gordon_disp_init(void)
+{
+	gordon_init();
+	mddi_wait(20);
+	gordon_disp_on();
+}
+
+static void toshiba_common_initial_setup(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT) {
+		write_client_reg(DPSET0    , 0x4bec0066, TRUE);
+		write_client_reg(DPSET1    , 0x00000113, TRUE);
+		write_client_reg(DPSUS     , 0x00000000, TRUE);
+		write_client_reg(DPRUN     , 0x00000001, TRUE);
+		mddi_wait(5);
+		write_client_reg(SYSCKENA  , 0x00000001, TRUE);
+		write_client_reg(CLKENB    , 0x0000a0e9, TRUE);
+
+		write_client_reg(GPIODATA  , 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR   , 0x0000024D, TRUE);
+		write_client_reg(GPIOSEL   , 0x00000173, TRUE);
+		write_client_reg(GPIOPC    , 0x03C300C0, TRUE);
+		write_client_reg(WKREQ     , 0x00000000, TRUE);
+		write_client_reg(GPIOIS    , 0x00000000, TRUE);
+		write_client_reg(GPIOIEV   , 0x00000001, TRUE);
+		write_client_reg(GPIOIC    , 0x000003FF, TRUE);
+		write_client_reg(GPIODATA  , 0x00040004, TRUE);
+
+		write_client_reg(GPIODATA  , 0x00080008, TRUE);
+		write_client_reg(DRAMPWR   , 0x00000001, TRUE);
+		write_client_reg(CLKENB    , 0x0000a0eb, TRUE);
+		write_client_reg(PWMCR     , 0x00000000, TRUE);
+		mddi_wait(1);
+
+		write_client_reg(SSICTL    , 0x00060399, TRUE);
+		write_client_reg(SSITIME   , 0x00000100, TRUE);
+		write_client_reg(CNT_DIS   , 0x00000002, TRUE);
+		write_client_reg(SSICTL    , 0x0006039b, TRUE);
+
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+		write_client_reg(SSITX     , 0x00000000, TRUE);
+		mddi_wait(7);
+
+		write_client_reg(SSITX     , 0x000800BA, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		write_client_reg(SSITX     , 0x00080036, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x0008003A, TRUE);
+		write_client_reg(SSITX     , 0x00000160, TRUE);
+		write_client_reg(SSITX     , 0x000800B1, TRUE);
+		write_client_reg(SSITX     , 0x0000015D, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B2, TRUE);
+		write_client_reg(SSITX     , 0x00000133, TRUE);
+		write_client_reg(SSITX     , 0x000800B3, TRUE);
+		write_client_reg(SSITX     , 0x00000122, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B4, TRUE);
+		write_client_reg(SSITX     , 0x00000102, TRUE);
+		write_client_reg(SSITX     , 0x000800B5, TRUE);
+		write_client_reg(SSITX     , 0x0000011E, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B6, TRUE);
+		write_client_reg(SSITX     , 0x00000127, TRUE);
+		write_client_reg(SSITX     , 0x000800B7, TRUE);
+		write_client_reg(SSITX     , 0x00000103, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B9, TRUE);
+		write_client_reg(SSITX     , 0x00000124, TRUE);
+		write_client_reg(SSITX     , 0x000800BD, TRUE);
+		write_client_reg(SSITX     , 0x000001A1, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800BB, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		write_client_reg(SSITX     , 0x000800BF, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800BE, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		write_client_reg(SSITX     , 0x000800C0, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C1, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		write_client_reg(SSITX     , 0x000800C2, TRUE);
+		write_client_reg(SSITX     , 0x00000111, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C3, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C4, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C5, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C6, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000132, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C7, TRUE);
+		write_client_reg(SSITX     , 0x00080164, TRUE);
+		write_client_reg(SSITX     , 0x00000145, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800C8, TRUE);
+		write_client_reg(SSITX     , 0x00000144, TRUE);
+		write_client_reg(SSITX     , 0x000800C9, TRUE);
+		write_client_reg(SSITX     , 0x00000152, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800CA, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800EC, TRUE);
+		write_client_reg(SSITX     , 0x00080101, TRUE);
+		write_client_reg(SSITX     , 0x000001FC, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800CF, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D0, TRUE);
+		write_client_reg(SSITX     , 0x00080110, TRUE);
+		write_client_reg(SSITX     , 0x00000104, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D1, TRUE);
+		write_client_reg(SSITX     , 0x00000101, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D2, TRUE);
+		write_client_reg(SSITX     , 0x00080100, TRUE);
+		write_client_reg(SSITX     , 0x00000128, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D3, TRUE);
+		write_client_reg(SSITX     , 0x00080100, TRUE);
+		write_client_reg(SSITX     , 0x00000128, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D4, TRUE);
+		write_client_reg(SSITX     , 0x00080126, TRUE);
+		write_client_reg(SSITX     , 0x000001A4, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800D5, TRUE);
+		write_client_reg(SSITX     , 0x00000120, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800EF, TRUE);
+		write_client_reg(SSITX     , 0x00080132, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+
+		write_client_reg(BITMAP0   , 0x032001E0, TRUE);
+		write_client_reg(BITMAP1   , 0x032001E0, TRUE);
+		write_client_reg(BITMAP2   , 0x014000F0, TRUE);
+		write_client_reg(BITMAP3   , 0x014000F0, TRUE);
+		write_client_reg(BITMAP4   , 0x014000F0, TRUE);
+		write_client_reg(CLKENB    , 0x0000A1EB, TRUE);
+		write_client_reg(PORT_ENB  , 0x00000001, TRUE);
+		write_client_reg(PORT      , 0x00000004, TRUE);
+		write_client_reg(PXL       , 0x00000002, TRUE);
+		write_client_reg(MPLFBUF   , 0x00000000, TRUE);
+		write_client_reg(HCYCLE    , 0x000000FD, TRUE);
+		write_client_reg(HSW       , 0x00000003, TRUE);
+		write_client_reg(HDE_START , 0x00000007, TRUE);
+		write_client_reg(HDE_SIZE  , 0x000000EF, TRUE);
+		write_client_reg(VCYCLE    , 0x00000325, TRUE);
+		write_client_reg(VSW       , 0x00000001, TRUE);
+		write_client_reg(VDE_START , 0x00000003, TRUE);
+		write_client_reg(VDE_SIZE  , 0x0000031F, TRUE);
+		write_client_reg(START     , 0x00000001, TRUE);
+		mddi_wait(32);
+		write_client_reg(SSITX     , 0x000800BC, TRUE);
+		write_client_reg(SSITX     , 0x00000180, TRUE);
+		write_client_reg(SSITX     , 0x0008003B, TRUE);
+		write_client_reg(SSITX     , 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B0, TRUE);
+		write_client_reg(SSITX     , 0x00000116, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x000800B8, TRUE);
+		write_client_reg(SSITX     , 0x000801FF, TRUE);
+		write_client_reg(SSITX     , 0x000001F5, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX     , 0x00000011, TRUE);
+		mddi_wait(5);
+		write_client_reg(SSITX     , 0x00000029, TRUE);
+		return;
+	}
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+		write_client_reg(DPSET1, 0x00000113, TRUE);
+		write_client_reg(DPSUS, 0x00000000, TRUE);
+		write_client_reg(DPRUN, 0x00000001, TRUE);
+		mddi_wait(14);
+		write_client_reg(SYSCKENA, 0x00000001, TRUE);
+		write_client_reg(CLKENB, 0x000000EF, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR, 0x0000024D, TRUE);
+		write_client_reg(SYSTEM_BLOCK2_BASE, 0x00000173, TRUE);
+		write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+		write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000000, TRUE);
+		write_client_reg(GPIOIS, 0x00000000, TRUE);
+		write_client_reg(GPIOIEV, 0x00000001, TRUE);
+		write_client_reg(GPIOIC, 0x000003FF, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x00060006, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x00080008, TRUE);
+		write_client_reg(GPIO_BLOCK_BASE, 0x02000200, TRUE);
+		write_client_reg(DRAMPWR, 0x00000001, TRUE);
+		write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+		write_client_reg(PWM_BLOCK_BASE, 0x00001388, TRUE);
+		write_client_reg(PWM0OFF, 0x00001387, TRUE);
+		write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+		write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+		write_client_reg(PWM1OFF, 0x00001387, TRUE);
+		write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+		write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+		write_client_reg(PWMCR, 0x00000003, TRUE);
+		mddi_wait(1);
+		write_client_reg(SPI_BLOCK_BASE, 0x00063111, TRUE);
+		write_client_reg(SSITIME, 0x00000100, TRUE);
+		write_client_reg(SPI_BLOCK_BASE, 0x00063113, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(CLKENB, 0x0000A1EF, TRUE);
+		write_client_reg(START, 0x00000000, TRUE);
+		write_client_reg(WRSTB, 0x0000003F, TRUE);
+		write_client_reg(RDSTB, 0x00000432, TRUE);
+		write_client_reg(PORT_ENB, 0x00000002, TRUE);
+		write_client_reg(VSYNIF, 0x00000000, TRUE);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x00000001, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(10);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x80000000, TRUE);
+		write_client_reg(ASY_DATC, 0x80000000, TRUE);
+		write_client_reg(ASY_DATD, 0x80000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+		write_client_reg(ASY_DATA, 0x80000007, TRUE);
+		write_client_reg(ASY_DATB, 0x00004005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(20);
+		write_client_reg(ASY_DATA, 0x80000059, TRUE);
+		write_client_reg(ASY_DATB, 0x00000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	} else {
+		write_client_reg(DPSET0, 0x4BEC0066, TRUE);
+		write_client_reg(DPSET1, 0x00000113, TRUE);
+		write_client_reg(DPSUS, 0x00000000, TRUE);
+		write_client_reg(DPRUN, 0x00000001, TRUE);
+		mddi_wait(14);
+		write_client_reg(SYSCKENA, 0x00000001, TRUE);
+		write_client_reg(CLKENB, 0x000000EF, TRUE);
+		write_client_reg(GPIODATA, 0x03FF0000, TRUE);
+		write_client_reg(GPIODIR, 0x0000024D, TRUE);
+		write_client_reg(GPIOSEL, 0x00000173, TRUE);
+		write_client_reg(GPIOPC, 0x03C300C0, TRUE);
+		write_client_reg(WKREQ, 0x00000000, TRUE);
+		write_client_reg(GPIOIS, 0x00000000, TRUE);
+		write_client_reg(GPIOIEV, 0x00000001, TRUE);
+		write_client_reg(GPIOIC, 0x000003FF, TRUE);
+		write_client_reg(GPIODATA, 0x00060006, TRUE);
+		write_client_reg(GPIODATA, 0x00080008, TRUE);
+		write_client_reg(GPIODATA, 0x02000200, TRUE);
+
+		if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA) {
+			mddi_wait(400);
+			write_client_reg(DRAMPWR, 0x00000001, TRUE);
+
+			write_client_reg(CNT_DIS, 0x00000002, TRUE);
+			write_client_reg(BITMAP0, 0x01E00320, TRUE);
+			write_client_reg(PORT_ENB, 0x00000001, TRUE);
+			write_client_reg(PORT, 0x00000004, TRUE);
+			write_client_reg(PXL, 0x0000003A, TRUE);
+			write_client_reg(MPLFBUF, 0x00000000, TRUE);
+			write_client_reg(HCYCLE, 0x00000253, TRUE);
+			write_client_reg(HSW, 0x00000003, TRUE);
+			write_client_reg(HDE_START, 0x00000017, TRUE);
+			write_client_reg(HDE_SIZE, 0x0000018F, TRUE);
+			write_client_reg(VCYCLE, 0x000001FF, TRUE);
+			write_client_reg(VSW, 0x00000001, TRUE);
+			write_client_reg(VDE_START, 0x00000003, TRUE);
+			write_client_reg(VDE_SIZE, 0x000001DF, TRUE);
+			write_client_reg(START, 0x00000001, TRUE);
+			mddi_wait(1);
+			write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+			write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+			write_client_reg(PWM1OFF, 0x00000087, TRUE);
+		} else {
+			write_client_reg(DRAMPWR, 0x00000001, TRUE);
+			write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+			write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+			write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+			write_client_reg(PWM1OFF, 0x00001387, TRUE);
+		}
+
+		write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+		write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+		write_client_reg(PWMCR, 0x00000003, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSICTL, 0x00000799, TRUE);
+		write_client_reg(SSITIME, 0x00000100, TRUE);
+		write_client_reg(SSICTL, 0x0000079b, TRUE);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000000, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800BA, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		write_client_reg(SSITX, 0x00080036, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BB, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x0008003A, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BF, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x000800B1, TRUE);
+		write_client_reg(SSITX, 0x0000015D, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B2, TRUE);
+		write_client_reg(SSITX, 0x00000133, TRUE);
+		write_client_reg(SSITX, 0x000800B3, TRUE);
+		write_client_reg(SSITX, 0x00000122, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B4, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		write_client_reg(SSITX, 0x000800B5, TRUE);
+		write_client_reg(SSITX, 0x0000011F, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B6, TRUE);
+		write_client_reg(SSITX, 0x00000128, TRUE);
+		write_client_reg(SSITX, 0x000800B7, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800B9, TRUE);
+		write_client_reg(SSITX, 0x00000120, TRUE);
+		write_client_reg(SSITX, 0x000800BD, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800BE, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x000800C0, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C1, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		write_client_reg(SSITX, 0x000800C2, TRUE);
+		write_client_reg(SSITX, 0x00000111, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C3, TRUE);
+		write_client_reg(SSITX, 0x0008010A, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C4, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C5, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C6, TRUE);
+		write_client_reg(SSITX, 0x00080160, TRUE);
+		write_client_reg(SSITX, 0x00000160, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C7, TRUE);
+		write_client_reg(SSITX, 0x00080133, TRUE);
+		write_client_reg(SSITX, 0x00000143, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800C8, TRUE);
+		write_client_reg(SSITX, 0x00000144, TRUE);
+		write_client_reg(SSITX, 0x000800C9, TRUE);
+		write_client_reg(SSITX, 0x00000133, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800CA, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800EC, TRUE);
+		write_client_reg(SSITX, 0x00080102, TRUE);
+		write_client_reg(SSITX, 0x00000118, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800CF, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D0, TRUE);
+		write_client_reg(SSITX, 0x00080110, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D1, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D2, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x0000013A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D3, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x0000013A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D4, TRUE);
+		write_client_reg(SSITX, 0x00080124, TRUE);
+		write_client_reg(SSITX, 0x0000016E, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800D5, TRUE);
+		write_client_reg(SSITX, 0x00000124, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800ED, TRUE);
+		write_client_reg(SSITX, 0x00080101, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D6, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D7, TRUE);
+		write_client_reg(SSITX, 0x00080110, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D8, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800D9, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000114, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800DE, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000114, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800DF, TRUE);
+		write_client_reg(SSITX, 0x00080112, TRUE);
+		write_client_reg(SSITX, 0x0000013F, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E0, TRUE);
+		write_client_reg(SSITX, 0x0000010B, TRUE);
+		write_client_reg(SSITX, 0x000800E2, TRUE);
+		write_client_reg(SSITX, 0x00000101, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E3, TRUE);
+		write_client_reg(SSITX, 0x00000136, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E4, TRUE);
+		write_client_reg(SSITX, 0x00080100, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E5, TRUE);
+		write_client_reg(SSITX, 0x00080102, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E6, TRUE);
+		write_client_reg(SSITX, 0x00000103, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E7, TRUE);
+		write_client_reg(SSITX, 0x00080104, TRUE);
+		write_client_reg(SSITX, 0x0000010A, TRUE);
+		mddi_wait(2);
+		write_client_reg(SSITX, 0x000800E8, TRUE);
+		write_client_reg(SSITX, 0x00000104, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(START, 0x00000000, TRUE);
+		write_client_reg(WRSTB, 0x0000003F, TRUE);
+		write_client_reg(RDSTB, 0x00000432, TRUE);
+		write_client_reg(PORT_ENB, 0x00000002, TRUE);
+		write_client_reg(VSYNIF, 0x00000000, TRUE);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x00000001, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(10);
+		write_client_reg(ASY_DATA, 0x80000000, TRUE);
+		write_client_reg(ASY_DATB, 0x80000000, TRUE);
+		write_client_reg(ASY_DATC, 0x80000000, TRUE);
+		write_client_reg(ASY_DATD, 0x80000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+		write_client_reg(ASY_DATA, 0x80000007, TRUE);
+		write_client_reg(ASY_DATB, 0x00004005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		mddi_wait(20);
+		write_client_reg(ASY_DATA, 0x80000059, TRUE);
+		write_client_reg(ASY_DATB, 0x00000000, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+		write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	}
+
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_STANDBY,
+				      TOSHIBA_STATE_PRIM_SEC_READY);
+}
+
+static void toshiba_prim_start(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(PORT, 0x00000016, TRUE);
+		write_client_reg(PXL, 0x00000002, TRUE);
+		write_client_reg(MPLFBUF, 0x00000000, TRUE);
+		write_client_reg(HCYCLE, 0x00000185, TRUE);
+		write_client_reg(HSW, 0x00000018, TRUE);
+		write_client_reg(HDE_START, 0x0000004A, TRUE);
+		write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+		write_client_reg(VCYCLE, 0x0000028E, TRUE);
+		write_client_reg(VSW, 0x00000004, TRUE);
+		write_client_reg(VDE_START, 0x00000009, TRUE);
+		write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+		write_client_reg(START, 0x00000001, TRUE);
+		write_client_reg(SYSTEM_BLOCK1_BASE, 0x00000002, TRUE);
+	} else{
+
+		write_client_reg(VSYNIF, 0x00000001, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(BITMAP1, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP2, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP3, 0x01E000F0, TRUE);
+		write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+		write_client_reg(CLKENB, 0x000001EF, TRUE);
+		write_client_reg(PORT_ENB, 0x00000001, TRUE);
+		write_client_reg(PORT, 0x00000004, TRUE);
+		write_client_reg(PXL, 0x00000002, TRUE);
+		write_client_reg(MPLFBUF, 0x00000000, TRUE);
+
+		if (mddi_toshiba_61Hz_refresh) {
+			write_client_reg(HCYCLE, 0x000000FC, TRUE);
+			mddi_toshiba_rows_per_second = 39526;
+			mddi_toshiba_rows_per_refresh = 646;
+			mddi_toshiba_usecs_per_refresh = 16344;
+		} else {
+			write_client_reg(HCYCLE, 0x0000010b, TRUE);
+			mddi_toshiba_rows_per_second = 37313;
+			mddi_toshiba_rows_per_refresh = 646;
+			mddi_toshiba_usecs_per_refresh = 17313;
+		}
+
+		write_client_reg(HSW, 0x00000003, TRUE);
+		write_client_reg(HDE_START, 0x00000007, TRUE);
+		write_client_reg(HDE_SIZE, 0x000000EF, TRUE);
+		write_client_reg(VCYCLE, 0x00000285, TRUE);
+		write_client_reg(VSW, 0x00000001, TRUE);
+		write_client_reg(VDE_START, 0x00000003, TRUE);
+		write_client_reg(VDE_SIZE, 0x0000027F, TRUE);
+		write_client_reg(START, 0x00000001, TRUE);
+		mddi_wait(10);
+		write_client_reg(SSITX, 0x000800BC, TRUE);
+		write_client_reg(SSITX, 0x00000180, TRUE);
+		write_client_reg(SSITX, 0x0008003B, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B0, TRUE);
+		write_client_reg(SSITX, 0x00000116, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B8, TRUE);
+		write_client_reg(SSITX, 0x000801FF, TRUE);
+		write_client_reg(SSITX, 0x000001F5, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x00000011, TRUE);
+		write_client_reg(SSITX, 0x00000029, TRUE);
+		write_client_reg(WKREQ, 0x00000000, TRUE);
+		write_client_reg(WAKEUP, 0x00000000, TRUE);
+		write_client_reg(INTMSK, 0x00000001, TRUE);
+	}
+
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+				      TOSHIBA_STATE_PRIM_NORMAL_MODE);
+}
+
+static void toshiba_sec_start(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(CLKENB, 0x000011EF, TRUE);
+	write_client_reg(BITMAP0, 0x028001E0, TRUE);
+	write_client_reg(BITMAP1, 0x00000000, TRUE);
+	write_client_reg(BITMAP2, 0x00000000, TRUE);
+	write_client_reg(BITMAP3, 0x00000000, TRUE);
+	write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(MPLFBUF, 0x00000004, TRUE);
+	write_client_reg(HCYCLE, 0x0000006B, TRUE);
+	write_client_reg(HSW, 0x00000003, TRUE);
+	write_client_reg(HDE_START, 0x00000007, TRUE);
+	write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+	write_client_reg(VCYCLE, 0x000000E6, TRUE);
+	write_client_reg(VSW, 0x00000001, TRUE);
+	write_client_reg(VDE_START, 0x00000003, TRUE);
+	write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+	write_client_reg(ASY_DATA, 0x80000001, TRUE);
+	write_client_reg(ASY_DATB, 0x0000011B, TRUE);
+	write_client_reg(ASY_DATC, 0x80000002, TRUE);
+	write_client_reg(ASY_DATD, 0x00000700, TRUE);
+	write_client_reg(ASY_DATE, 0x80000003, TRUE);
+	write_client_reg(ASY_DATF, 0x00000230, TRUE);
+	write_client_reg(ASY_DATG, 0x80000008, TRUE);
+	write_client_reg(ASY_DATH, 0x00000402, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000009, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x8000000B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x8000000C, TRUE);
+	write_client_reg(ASY_DATF, 0x00000000, TRUE);
+	write_client_reg(ASY_DATG, 0x8000000D, TRUE);
+	write_client_reg(ASY_DATH, 0x00000409, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x8000000E, TRUE);
+	write_client_reg(ASY_DATB, 0x00000409, TRUE);
+	write_client_reg(ASY_DATC, 0x80000030, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000031, TRUE);
+	write_client_reg(ASY_DATF, 0x00000100, TRUE);
+	write_client_reg(ASY_DATG, 0x80000032, TRUE);
+	write_client_reg(ASY_DATH, 0x00000104, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000033, TRUE);
+	write_client_reg(ASY_DATB, 0x00000400, TRUE);
+	write_client_reg(ASY_DATC, 0x80000034, TRUE);
+	write_client_reg(ASY_DATD, 0x00000306, TRUE);
+	write_client_reg(ASY_DATE, 0x80000035, TRUE);
+	write_client_reg(ASY_DATF, 0x00000706, TRUE);
+	write_client_reg(ASY_DATG, 0x80000036, TRUE);
+	write_client_reg(ASY_DATH, 0x00000707, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000037, TRUE);
+	write_client_reg(ASY_DATB, 0x00000004, TRUE);
+	write_client_reg(ASY_DATC, 0x80000038, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000039, TRUE);
+	write_client_reg(ASY_DATF, 0x00000000, TRUE);
+	write_client_reg(ASY_DATG, 0x8000003A, TRUE);
+	write_client_reg(ASY_DATH, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000044, TRUE);
+	write_client_reg(ASY_DATB, 0x0000AF00, TRUE);
+	write_client_reg(ASY_DATC, 0x80000045, TRUE);
+	write_client_reg(ASY_DATD, 0x0000DB00, TRUE);
+	write_client_reg(ASY_DATE, 0x08000042, TRUE);
+	write_client_reg(ASY_DATF, 0x0000DB00, TRUE);
+	write_client_reg(ASY_DATG, 0x80000021, TRUE);
+	write_client_reg(ASY_DATH, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x0000000C, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	write_client_reg(ASY_DATA, 0x80000022, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000003, TRUE);
+	write_client_reg(START, 0x00000001, TRUE);
+	mddi_wait(60);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000050, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x80000051, TRUE);
+	write_client_reg(ASY_DATD, 0x00000E00, TRUE);
+	write_client_reg(ASY_DATE, 0x80000052, TRUE);
+	write_client_reg(ASY_DATF, 0x00000D01, TRUE);
+	write_client_reg(ASY_DATG, 0x80000053, TRUE);
+	write_client_reg(ASY_DATH, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	write_client_reg(ASY_DATA, 0x80000058, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005A, TRUE);
+	write_client_reg(ASY_DATD, 0x00000E01, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	write_client_reg(ASY_DATA, 0x80000011, TRUE);
+	write_client_reg(ASY_DATB, 0x00000812, TRUE);
+	write_client_reg(ASY_DATC, 0x80000012, TRUE);
+	write_client_reg(ASY_DATD, 0x00000003, TRUE);
+	write_client_reg(ASY_DATE, 0x80000013, TRUE);
+	write_client_reg(ASY_DATF, 0x00000909, TRUE);
+	write_client_reg(ASY_DATG, 0x80000010, TRUE);
+	write_client_reg(ASY_DATH, 0x00000040, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(40);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000340, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(60);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00003340, TRUE);
+	write_client_reg(ASY_DATC, 0x80000007, TRUE);
+	write_client_reg(ASY_DATD, 0x00004007, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	mddi_wait(1);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004017, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000059, TRUE);
+	write_client_reg(ASY_DATF, 0x00000011, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+	mddi_wait(20);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	/* Index setting of SUB LCDD */
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x00000079, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	/* Index setting of SUB LCDD */
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	/* LTPS I/F control */
+	write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+	/* Direct cmd transfer enable */
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	/* Direct cmd transfer disable */
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(20);
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_SEC_READY,
+				      TOSHIBA_STATE_SEC_NORMAL_MODE);
+}
+
+static void toshiba_prim_lcd_off(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		gordon_disp_off();
+	} else{
+
+		/* Main panel power off (Deep standby in) */
+		write_client_reg(SSITX, 0x000800BC, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+		write_client_reg(SSITX, 0x00000028, TRUE);
+		mddi_wait(1);
+		write_client_reg(SSITX, 0x000800B8, TRUE);
+		write_client_reg(SSITX, 0x00000180, TRUE);
+		write_client_reg(SSITX, 0x00000102, TRUE);
+		write_client_reg(SSITX, 0x00000010, TRUE);
+	}
+	write_client_reg(PORT, 0x00000003, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_wait(1);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_wait(3);
+	if (TM_GET_PID(mfd->panel.id) != LCD_SHARP_2P4_VGA) {
+		write_client_reg(SSITX, 0x000800B0, TRUE);
+		write_client_reg(SSITX, 0x00000100, TRUE);
+	}
+	mddi_toshiba_state_transition(TOSHIBA_STATE_PRIM_NORMAL_MODE,
+				      TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_lcd_off(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004016, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000002, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004004, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	write_client_reg(PORT_ENB, 0x00000001, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	mddi_toshiba_state_transition(TOSHIBA_STATE_SEC_NORMAL_MODE,
+				      TOSHIBA_STATE_PRIM_SEC_STANDBY);
+}
+
+static void toshiba_sec_cont_update_start(struct msm_fb_data_type *mfd)
+{
+
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(INTMASK, 0x00000001, TRUE);
+	write_client_reg(TTBUSSEL, 0x0000000B, TRUE);
+	write_client_reg(MONI, 0x00000008, TRUE);
+	write_client_reg(CLKENB, 0x000000EF, TRUE);
+	write_client_reg(CLKENB, 0x000010EF, TRUE);
+	write_client_reg(CLKENB, 0x000011EF, TRUE);
+	write_client_reg(BITMAP4, 0x00DC00B0, TRUE);
+	write_client_reg(HCYCLE, 0x0000006B, TRUE);
+	write_client_reg(HSW, 0x00000003, TRUE);
+	write_client_reg(HDE_START, 0x00000002, TRUE);
+	write_client_reg(HDE_SIZE, 0x00000057, TRUE);
+	write_client_reg(VCYCLE, 0x000000E6, TRUE);
+	write_client_reg(VSW, 0x00000001, TRUE);
+	write_client_reg(VDE_START, 0x00000003, TRUE);
+	write_client_reg(VDE_SIZE, 0x000000DB, TRUE);
+	write_client_reg(WRSTB, 0x00000015, TRUE);
+	write_client_reg(MPLFBUF, 0x00000004, TRUE);
+	write_client_reg(ASY_DATA, 0x80000021, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_DATC, 0x80000022, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000007, TRUE);
+	write_client_reg(PXL, 0x00000089, TRUE);
+	write_client_reg(VSYNIF, 0x00000001, TRUE);
+	mddi_wait(2);
+}
+
+static void toshiba_sec_cont_update_stop(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(3);
+	write_client_reg(SRST, 0x00000002, TRUE);
+	mddi_wait(3);
+	write_client_reg(SRST, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_backlight_on(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(TIMER0CTRL, 0x00000060, TRUE);
+	write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+	write_client_reg(PWM0OFF, 0x00000001, TRUE);
+	write_client_reg(TIMER1CTRL, 0x00000060, TRUE);
+	write_client_reg(TIMER1LOAD, 0x00001388, TRUE);
+	write_client_reg(PWM1OFF, 0x00001387, TRUE);
+	write_client_reg(TIMER0CTRL, 0x000000E0, TRUE);
+	write_client_reg(TIMER1CTRL, 0x000000E0, TRUE);
+	write_client_reg(PWMCR, 0x00000003, TRUE);
+}
+
+static void toshiba_sec_sleep_in(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004016, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x0000000B, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000002, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000000, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004004, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(PORT, 0x00000000, TRUE);
+	write_client_reg(PXL, 0x00000000, TRUE);
+	write_client_reg(START, 0x00000000, TRUE);
+	write_client_reg(REGENB, 0x00000001, TRUE);
+	/* Sleep in sequence */
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000302, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+}
+
+static void toshiba_sec_sleep_out(struct msm_fb_data_type *mfd)
+{
+	if (TM_GET_PID(mfd->panel.id) == LCD_TOSHIBA_2P4_WVGA_PT)
+		return;
+
+	write_client_reg(VSYNIF, 0x00000000, TRUE);
+	write_client_reg(PORT_ENB, 0x00000002, TRUE);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000300, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	/*  Display ON sequence */
+	write_client_reg(ASY_DATA, 0x80000011, TRUE);
+	write_client_reg(ASY_DATB, 0x00000812, TRUE);
+	write_client_reg(ASY_DATC, 0x80000012, TRUE);
+	write_client_reg(ASY_DATD, 0x00000003, TRUE);
+	write_client_reg(ASY_DATE, 0x80000013, TRUE);
+	write_client_reg(ASY_DATF, 0x00000909, TRUE);
+	write_client_reg(ASY_DATG, 0x80000010, TRUE);
+	write_client_reg(ASY_DATH, 0x00000040, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000001, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000000, TRUE);
+	mddi_wait(4);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00000340, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(6);
+	write_client_reg(ASY_DATA, 0x80000010, TRUE);
+	write_client_reg(ASY_DATB, 0x00003340, TRUE);
+	write_client_reg(ASY_DATC, 0x80000007, TRUE);
+	write_client_reg(ASY_DATD, 0x00004007, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000009, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000008, TRUE);
+	mddi_wait(1);
+	write_client_reg(ASY_DATA, 0x80000007, TRUE);
+	write_client_reg(ASY_DATB, 0x00004017, TRUE);
+	write_client_reg(ASY_DATC, 0x8000005B, TRUE);
+	write_client_reg(ASY_DATD, 0x00000000, TRUE);
+	write_client_reg(ASY_DATE, 0x80000059, TRUE);
+	write_client_reg(ASY_DATF, 0x00000011, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000D, TRUE);
+	write_client_reg(ASY_CMDSET, 0x0000000C, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000019, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x00000079, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+	write_client_reg(ASY_DATA, 0x80000059, TRUE);
+	write_client_reg(ASY_DATB, 0x000003FD, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000005, TRUE);
+	write_client_reg(ASY_CMDSET, 0x00000004, TRUE);
+	mddi_wait(2);
+}
+
+static void mddi_toshiba_lcd_set_backlight(struct msm_fb_data_type *mfd)
+{
+	int32 level;
+	int ret = -EPERM;
+	int max = mfd->panel_info.bl_max;
+	int min = mfd->panel_info.bl_min;
+
+	if (mddi_toshiba_pdata && mddi_toshiba_pdata->pmic_backlight) {
+		ret = mddi_toshiba_pdata->pmic_backlight(mfd->bl_level);
+		if (!ret)
+			return;
+	}
+
+	if (ret && mddi_toshiba_pdata && mddi_toshiba_pdata->backlight_level) {
+		level = mddi_toshiba_pdata->backlight_level(mfd->bl_level,
+								max, min);
+
+		if (level < 0)
+			return;
+
+		if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+			write_client_reg(TIMER0LOAD, 0x00001388, TRUE);
+	} else {
+		if (!max)
+			level = 0;
+		else
+			level = (mfd->bl_level * 4999) / max;
+	}
+
+	write_client_reg(PWM0OFF, level, TRUE);
+}
+
+static void mddi_toshiba_vsync_set_handler(msm_fb_vsync_handler_type handler,	/* ISR to be executed */
+					   void *arg)
+{
+	boolean error = FALSE;
+	unsigned long flags;
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	/* INTLOCK(); */
+
+	if (mddi_toshiba_vsync_handler != NULL) {
+		error = TRUE;
+	} else {
+		/* Register the handler for this particular GROUP interrupt source */
+		mddi_toshiba_vsync_handler = handler;
+		mddi_toshiba_vsync_handler_arg = arg;
+	}
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+	/* MDDI_INTFREE(); */
+	if (error) {
+		MDDI_MSG_ERR("MDDI: Previous Vsync handler never called\n");
+	} else {
+		/* Enable the vsync wakeup */
+		mddi_queue_register_write(INTMSK, 0x0000, FALSE, 0);
+
+		mddi_toshiba_vsync_attempts = 1;
+		mddi_vsync_detect_enabled = TRUE;
+	}
+}				/* mddi_toshiba_vsync_set_handler */
+
+static void mddi_toshiba_lcd_vsync_detected(boolean detected)
+{
+	/* static timetick_type start_time = 0; */
+	static struct timeval start_time;
+	static boolean first_time = TRUE;
+	/* uint32 mdp_cnt_val = 0; */
+	/* timetick_type elapsed_us; */
+	struct timeval now;
+	uint32 elapsed_us;
+	uint32 num_vsyncs;
+
+	if ((detected) || (mddi_toshiba_vsync_attempts > 5)) {
+		if ((detected) && (mddi_toshiba_monitor_refresh_value)) {
+			/* if (start_time != 0) */
+			if (!first_time) {
+				jiffies_to_timeval(jiffies, &now);
+				elapsed_us =
+				    (now.tv_sec - start_time.tv_sec) * 1000000 +
+				    now.tv_usec - start_time.tv_usec;
+				/*
+				 * LCD is configured for a refresh every usecs,
+				 *  so to determine the number of vsyncs that
+				 *  have occurred since the last measurement
+				 *  add half that to the time difference and
+				 *  divide by the refresh rate.
+				 */
+				num_vsyncs = (elapsed_us +
+					      (mddi_toshiba_usecs_per_refresh >>
+					       1)) /
+				    mddi_toshiba_usecs_per_refresh;
+				/*
+				 * LCD is configured for * hsyncs (rows) per
+				 * refresh cycle. Calculate new rows_per_second
+				 * value based upon these new measurements.
+				 * MDP can update with this new value.
+				 */
+				mddi_toshiba_rows_per_second =
+				    (mddi_toshiba_rows_per_refresh * 1000 *
+				     num_vsyncs) / (elapsed_us / 1000);
+			}
+			/* start_time = timetick_get(); */
+			first_time = FALSE;
+			jiffies_to_timeval(jiffies, &start_time);
+			if (mddi_toshiba_report_refresh_measurements) {
+				(void)mddi_queue_register_read_int(VPOS,
+								   &mddi_toshiba_curr_vpos);
+				/* mdp_cnt_val = MDP_LINE_COUNT; */
+			}
+		}
+		/* if detected = TRUE, client initiated wakeup was detected */
+		if (mddi_toshiba_vsync_handler != NULL) {
+			(*mddi_toshiba_vsync_handler)
+			    (mddi_toshiba_vsync_handler_arg);
+			mddi_toshiba_vsync_handler = NULL;
+		}
+		mddi_vsync_detect_enabled = FALSE;
+		mddi_toshiba_vsync_attempts = 0;
+		/* need to disable the interrupt wakeup */
+		if (!mddi_queue_register_write_int(INTMSK, 0x0001))
+			MDDI_MSG_ERR("Vsync interrupt disable failed!\n");
+		if (!detected) {
+			/* give up after 5 failed attempts but show error */
+			MDDI_MSG_NOTICE("Vsync detection failed!\n");
+		} else if ((mddi_toshiba_monitor_refresh_value) &&
+			   (mddi_toshiba_report_refresh_measurements)) {
+			MDDI_MSG_NOTICE("  Last Line Counter=%d!\n",
+					mddi_toshiba_curr_vpos);
+		/* MDDI_MSG_NOTICE("  MDP Line Counter=%d!\n",mdp_cnt_val); */
+			MDDI_MSG_NOTICE("  Lines Per Second=%d!\n",
+					mddi_toshiba_rows_per_second);
+		}
+		/* clear the interrupt */
+		if (!mddi_queue_register_write_int(INTFLG, 0x0001))
+			MDDI_MSG_ERR("Vsync interrupt clear failed!\n");
+	} else {
+		/* if detected = FALSE, we woke up from hibernation, but did not
+		 * detect client initiated wakeup.
+		 */
+		mddi_toshiba_vsync_attempts++;
+	}
+}
+
+static void mddi_toshiba_prim_init(struct msm_fb_data_type *mfd)
+{
+
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		break;
+	case TOSHIBA_STATE_OFF:
+		toshiba_state = TOSHIBA_STATE_PRIM_SEC_STANDBY;
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_SEC_NORMAL_MODE:
+		toshiba_sec_cont_update_stop(mfd);
+		toshiba_sec_sleep_in(mfd);
+		toshiba_sec_sleep_out(mfd);
+		toshiba_sec_lcd_off(mfd);
+		toshiba_common_initial_setup(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_prim_init from state %d\n",
+			     toshiba_state);
+	}
+
+	toshiba_prim_start(mfd);
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA)
+		gordon_disp_init();
+	mddi_host_write_pix_attr_reg(0x00C3);
+}
+
+static void mddi_toshiba_sec_init(struct msm_fb_data_type *mfd)
+{
+
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		break;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		toshiba_common_initial_setup(mfd);
+		break;
+	case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+		toshiba_prim_lcd_off(mfd);
+		toshiba_common_initial_setup(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_sec_init from state %d\n",
+			     toshiba_state);
+	}
+
+	toshiba_sec_start(mfd);
+	toshiba_sec_backlight_on(mfd);
+	toshiba_sec_cont_update_start(mfd);
+	mddi_host_write_pix_attr_reg(0x0400);
+}
+
+static void mddi_toshiba_lcd_powerdown(struct msm_fb_data_type *mfd)
+{
+	switch (toshiba_state) {
+	case TOSHIBA_STATE_PRIM_SEC_READY:
+		mddi_toshiba_prim_init(mfd);
+		mddi_toshiba_lcd_powerdown(mfd);
+		return;
+	case TOSHIBA_STATE_PRIM_SEC_STANDBY:
+		break;
+	case TOSHIBA_STATE_PRIM_NORMAL_MODE:
+		toshiba_prim_lcd_off(mfd);
+		break;
+	case TOSHIBA_STATE_SEC_NORMAL_MODE:
+		toshiba_sec_cont_update_stop(mfd);
+		toshiba_sec_sleep_in(mfd);
+		toshiba_sec_sleep_out(mfd);
+		toshiba_sec_lcd_off(mfd);
+		break;
+	default:
+		MDDI_MSG_ERR("mddi_toshiba_lcd_powerdown from state %d\n",
+			     toshiba_state);
+	}
+}
+
+static int mddi_sharpgordon_firsttime = 1;
+
+static int mddi_toshiba_lcd_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	mfd = platform_get_drvdata(pdev);
+	if (!mfd)
+		return -ENODEV;
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (TM_GET_DID(mfd->panel.id) == TOSHIBA_VGA_PRIM)
+		mddi_toshiba_prim_init(mfd);
+	else
+		mddi_toshiba_sec_init(mfd);
+	if (TM_GET_PID(mfd->panel.id) == LCD_SHARP_2P4_VGA) {
+		if (mddi_sharpgordon_firsttime) {
+			mddi_sharpgordon_firsttime = 0;
+			write_client_reg(REGENB, 0x00000001, TRUE);
+		}
+	}
+	return 0;
+}
+
+static int mddi_toshiba_lcd_off(struct platform_device *pdev)
+{
+	mddi_toshiba_lcd_powerdown(platform_get_drvdata(pdev));
+	return 0;
+}
+
+static int __init mddi_toshiba_lcd_probe(struct platform_device *pdev)
+{
+	if (pdev->id == 0) {
+		mddi_toshiba_pdata = pdev->dev.platform_data;
+		return 0;
+	}
+
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = mddi_toshiba_lcd_probe,
+	.driver = {
+		.name   = "mddi_toshiba",
+	},
+};
+
+static struct msm_fb_panel_data toshiba_panel_data = {
+	.on 		= mddi_toshiba_lcd_on,
+	.off 		= mddi_toshiba_lcd_off,
+};
+
+static int ch_used[3];
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+					u32 channel, u32 panel)
+{
+	struct platform_device *pdev = NULL;
+	int ret;
+
+	if ((channel >= 3) || ch_used[channel])
+		return -ENODEV;
+
+	if ((channel != TOSHIBA_VGA_PRIM) &&
+	    mddi_toshiba_pdata && mddi_toshiba_pdata->panel_num)
+		if (mddi_toshiba_pdata->panel_num() < 2)
+			return -ENODEV;
+
+	ch_used[channel] = TRUE;
+
+	pdev = platform_device_alloc("mddi_toshiba", (panel << 8)|channel);
+	if (!pdev)
+		return -ENOMEM;
+
+	if (channel == TOSHIBA_VGA_PRIM) {
+		toshiba_panel_data.set_backlight =
+				mddi_toshiba_lcd_set_backlight;
+
+		if (pinfo->lcd.vsync_enable) {
+			toshiba_panel_data.set_vsync_notifier =
+				mddi_toshiba_vsync_set_handler;
+			mddi_lcd.vsync_detected =
+				mddi_toshiba_lcd_vsync_detected;
+		}
+	} else {
+		toshiba_panel_data.set_backlight = NULL;
+		toshiba_panel_data.set_vsync_notifier = NULL;
+	}
+
+	toshiba_panel_data.panel_info = *pinfo;
+
+	ret = platform_device_add_data(pdev, &toshiba_panel_data,
+		sizeof(toshiba_panel_data));
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_add_data failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		printk(KERN_ERR
+		  "%s: platform_device_register failed!\n", __func__);
+		goto err_device_put;
+	}
+
+	return 0;
+
+err_device_put:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int __init mddi_toshiba_lcd_init(void)
+{
+	return platform_driver_register(&this_driver);
+}
+
+module_init(mddi_toshiba_lcd_init);
diff --git a/drivers/staging/msm/mddi_toshiba.h b/drivers/staging/msm/mddi_toshiba.h
new file mode 100644
index 0000000..2d22b9a
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba.h
@@ -0,0 +1,52 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDI_TOSHIBA_H
+#define MDDI_TOSHIBA_H
+
+#define TOSHIBA_VGA_PRIM 1
+#define TOSHIBA_VGA_SECD 2
+
+#define LCD_TOSHIBA_2P4_VGA 	0
+#define LCD_TOSHIBA_2P4_WVGA 	1
+#define LCD_TOSHIBA_2P4_WVGA_PT	2
+#define LCD_SHARP_2P4_VGA 	3
+
+#define GPIO_BLOCK_BASE        0x150000
+#define SYSTEM_BLOCK2_BASE     0x170000
+
+#define GPIODIR     (GPIO_BLOCK_BASE|0x04)
+#define GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
+#define GPIOPC      (GPIO_BLOCK_BASE|0x28)
+#define GPIODATA    (GPIO_BLOCK_BASE|0x00)
+
+#define write_client_reg(__X, __Y, __Z) {\
+  mddi_queue_register_write(__X, __Y, TRUE, 0);\
+}
+
+#endif /* MDDI_TOSHIBA_H */
diff --git a/drivers/staging/msm/mddi_toshiba_vga.c b/drivers/staging/msm/mddi_toshiba_vga.c
new file mode 100644
index 0000000..7e61d3a
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_vga.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static uint32 read_client_reg(uint32 addr)
+{
+	uint32 val;
+	mddi_queue_register_read(addr, &val, TRUE, 0);
+	return val;
+}
+
+static uint32 toshiba_lcd_gpio_read(void)
+{
+	uint32 val;
+
+	write_client_reg(GPIODIR, 0x0000000C, TRUE);
+	write_client_reg(GPIOSEL, 0x00000000, TRUE);
+	write_client_reg(GPIOSEL, 0x00000000, TRUE);
+	write_client_reg(GPIOPC, 0x03CF00C0, TRUE);
+	val = read_client_reg(GPIODATA) & 0x2C0;
+
+	return val;
+}
+
+static u32 mddi_toshiba_panel_detect(void)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	uint32 lcd_gpio;
+	u32 mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+
+	/* Toshiba display requires larger drive_lo value */
+	mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+	lcd_gpio = toshiba_lcd_gpio_read();
+	switch (lcd_gpio) {
+	case 0x0080:
+		mddi_toshiba_lcd = LCD_SHARP_2P4_VGA;
+		break;
+
+	case 0x00C0:
+	default:
+		mddi_toshiba_lcd = LCD_TOSHIBA_2P4_VGA;
+		break;
+	}
+
+	return mddi_toshiba_lcd;
+}
+
+static int __init mddi_toshiba_vga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+	u32 panel;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+
+	ret = msm_fb_detect_client("mddi_toshiba_vga");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+		if ((id >> 16) != 0xD263)
+			return 0;
+	}
+#endif
+
+	panel = mddi_toshiba_panel_detect();
+
+	pinfo.xres = 480;
+	pinfo.yres = 640;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = TRUE;
+	pinfo.lcd.refx100 = 6118;
+	pinfo.lcd.v_back_porch = 6;
+	pinfo.lcd.v_front_porch = 0;
+	pinfo.lcd.v_pulse_width = 0;
+	pinfo.lcd.hw_vsync_mode = FALSE;
+	pinfo.lcd.vsync_notifier_period = (1 * HZ);
+	pinfo.bl_max = 99;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 122880000;
+	pinfo.clk_min =  120000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM, panel);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		return ret;
+	}
+
+	pinfo.xres = 176;
+	pinfo.yres = 220;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_2;
+	pinfo.mddi.vdopkt = 0x400;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.clk_rate = 122880000;
+	pinfo.clk_min =  120000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_SECD, panel);
+	if (ret)
+		printk(KERN_WARNING
+			"%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(mddi_toshiba_vga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga.c b/drivers/staging/msm/mddi_toshiba_wvga.c
new file mode 100644
index 0000000..557b0f0
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	if (msm_fb_detect_client("mddi_toshiba_wvga"))
+		return 0;
+#endif
+
+	pinfo.xres = 800;
+	pinfo.yres = 480;
+	pinfo.pdest = DISPLAY_2;
+	pinfo.type = MDDI_PANEL;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = TRUE;
+	pinfo.lcd.refx100 = 6118;
+	pinfo.lcd.v_back_porch = 6;
+	pinfo.lcd.v_front_porch = 0;
+	pinfo.lcd.v_pulse_width = 0;
+	pinfo.lcd.hw_vsync_mode = FALSE;
+	pinfo.lcd.vsync_notifier_period = (1 * HZ);
+	pinfo.bl_max = 4;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 192000000;
+	pinfo.clk_min =  190000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+					   LCD_TOSHIBA_2P4_WVGA);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+module_init(mddi_toshiba_wvga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga_pt.c b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
new file mode 100644
index 0000000..fc7d4e0
--- /dev/null
+++ b/drivers/staging/msm/mddi_toshiba_wvga_pt.c
@@ -0,0 +1,64 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+#include "mddi_toshiba.h"
+
+static int __init mddi_toshiba_wvga_pt_init(void)
+{
+	int ret;
+	struct msm_panel_info pinfo;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	uint id;
+
+	ret = msm_fb_detect_client("mddi_toshiba_wvga_pt");
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret) {
+		id = mddi_get_client_id();
+		if (id != 0xd2638722)
+			return 0;
+	}
+#endif
+
+	pinfo.xres = 480;
+	pinfo.yres = 800;
+	pinfo.type = MDDI_PANEL;
+	pinfo.pdest = DISPLAY_1;
+	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
+	pinfo.wait_cycle = 0;
+	pinfo.bpp = 18;
+	pinfo.lcd.vsync_enable = FALSE;
+	pinfo.bl_max = 15;
+	pinfo.bl_min = 1;
+	pinfo.clk_rate = 192000000;
+	pinfo.clk_min =  190000000;
+	pinfo.clk_max =  200000000;
+	pinfo.fb_num = 2;
+
+	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
+						LCD_TOSHIBA_2P4_WVGA_PT);
+	if (ret)
+		printk(KERN_ERR "%s: failed to register device!\n", __func__);
+
+	return ret;
+}
+
+module_init(mddi_toshiba_wvga_pt_init);
diff --git a/drivers/staging/msm/mddihost.c b/drivers/staging/msm/mddihost.c
new file mode 100644
index 0000000..c6c1ee4e
--- /dev/null
+++ b/drivers/staging/msm/mddihost.c
@@ -0,0 +1,377 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+struct semaphore mddi_host_mutex;
+
+struct clk *mddi_io_clk;
+static boolean mddi_host_powered = FALSE;
+static boolean mddi_host_initialized = FALSE;
+extern uint32 *mddi_reg_read_value_ptr;
+
+mddi_lcd_func_type mddi_lcd;
+
+extern mddi_client_capability_type mddi_client_capability_pkt;
+
+#ifdef FEATURE_MDDI_HITACHI
+extern void mddi_hitachi_window_adjust(uint16 x1,
+				       uint16 x2, uint16 y1, uint16 y2);
+#endif
+
+extern void mddi_toshiba_lcd_init(void);
+
+#ifdef FEATURE_MDDI_S6D0142
+extern void mddi_s6d0142_lcd_init(void);
+extern void mddi_s6d0142_window_adjust(uint16 x1,
+				       uint16 x2,
+				       uint16 y1,
+				       uint16 y2,
+				       mddi_llist_done_cb_type done_cb);
+#endif
+
+void mddi_init(void)
+{
+	if (mddi_host_initialized)
+		return;
+
+	mddi_host_initialized = TRUE;
+
+	init_MUTEX(&mddi_host_mutex);
+
+	if (!mddi_host_powered) {
+		down(&mddi_host_mutex);
+		mddi_host_init(MDDI_HOST_PRIM);
+		mddi_host_powered = TRUE;
+		up(&mddi_host_mutex);
+		mdelay(10);
+	}
+}
+
+int mddi_host_register_read(uint32 reg_addr,
+     uint32 *reg_value_ptr, boolean wait, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+	int ret = 0;
+
+	if (in_interrupt())
+		MDDI_MSG_CRIT("Called from ISR context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		mddi_init();
+	}
+
+	down(&mddi_host_mutex);
+
+	mddi_reg_read_value_ptr = reg_value_ptr;
+	curr_llist_idx = mddi_get_reg_read_llist_item(host, TRUE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+
+		/* need to change this to some sort of wait */
+		MDDI_MSG_ERR("Attempting to queue up more than 1 reg read\n");
+		return -EINVAL;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_ptr->link_controller_flags = 0x11;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 0;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->packet_data_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x8001;
+	regacc_pkt_ptr->register_address = reg_addr;
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+				   NULL, host);
+	/* need to check if we can write the pointer or not */
+
+	up(&mddi_host_mutex);
+
+	if (wait) {
+		int wait_ret;
+
+		mddi_linked_list_notify_type *llist_notify_ptr;
+		llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+		wait_ret = wait_for_completion_timeout(
+					&(llist_notify_ptr->done_comp), 5 * HZ);
+
+		if (wait_ret <= 0)
+			ret = -EBUSY;
+
+		if (wait_ret < 0)
+			printk(KERN_ERR "%s: failed to wait for completion!\n",
+				__func__);
+		else if (!wait_ret)
+			printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+	}
+
+	MDDI_MSG_DEBUG("Reg Read value=0x%x\n", *reg_value_ptr);
+
+	return ret;
+}				/* mddi_host_register_read */
+
+int mddi_host_register_write(uint32 reg_addr,
+     uint32 reg_val, enum mddi_data_packet_size_type packet_size,
+     boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_linked_list_type *curr_llist_dma_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+	int ret = 0;
+
+	if (in_interrupt())
+		MDDI_MSG_CRIT("Called from ISR context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		mddi_init();
+	}
+
+	down(&mddi_host_mutex);
+
+	curr_llist_idx = mddi_get_next_free_llist_item(host, TRUE);
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+	curr_llist_ptr->link_controller_flags = 1;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 4;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count +
+					(uint16)packet_size;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x0001;
+	regacc_pkt_ptr->register_address = reg_addr;
+	regacc_pkt_ptr->register_data_list = reg_val;
+
+	MDDI_MSG_DEBUG("Reg Access write reg=0x%x, value=0x%x\n",
+		       regacc_pkt_ptr->register_address,
+		       regacc_pkt_ptr->register_data_list);
+
+	regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+	curr_llist_ptr->packet_data_pointer =
+	    (void *)(&regacc_pkt_ptr->register_data_list);
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, wait,
+				   done_cb, host);
+
+	up(&mddi_host_mutex);
+
+	if (wait) {
+		int wait_ret;
+
+		mddi_linked_list_notify_type *llist_notify_ptr;
+		llist_notify_ptr = &llist_extern_notify[host][curr_llist_idx];
+		wait_ret = wait_for_completion_timeout(
+					&(llist_notify_ptr->done_comp), 5 * HZ);
+
+		if (wait_ret <= 0)
+			ret = -EBUSY;
+
+		if (wait_ret < 0)
+			printk(KERN_ERR "%s: failed to wait for completion!\n",
+				__func__);
+		else if (!wait_ret)
+			printk(KERN_ERR "%s: Timed out waiting!\n", __func__);
+	}
+
+	return ret;
+}				/* mddi_host_register_write */
+
+boolean mddi_host_register_read_int
+    (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+
+	if (!in_interrupt())
+		MDDI_MSG_CRIT("Called from TASK context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		return FALSE;
+	}
+
+	if (down_trylock(&mddi_host_mutex) != 0)
+		return FALSE;
+
+	mddi_reg_read_value_ptr = reg_value_ptr;
+	curr_llist_idx = mddi_get_reg_read_llist_item(host, FALSE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+		return FALSE;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_ptr->link_controller_flags = 0x11;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 0;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->packet_data_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x8001;
+	regacc_pkt_ptr->register_address = reg_addr;
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+				   NULL, host);
+	/* need to check if we can write the pointer or not */
+
+	up(&mddi_host_mutex);
+
+	return TRUE;
+
+}				/* mddi_host_register_read */
+
+boolean mddi_host_register_write_int
+    (uint32 reg_addr,
+     uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host) {
+	mddi_linked_list_type *curr_llist_ptr;
+	mddi_linked_list_type *curr_llist_dma_ptr;
+	mddi_register_access_packet_type *regacc_pkt_ptr;
+	uint16 curr_llist_idx;
+
+	if (!in_interrupt())
+		MDDI_MSG_CRIT("Called from TASK context\n");
+
+	if (!mddi_host_powered) {
+		MDDI_MSG_ERR("MDDI powered down!\n");
+		return FALSE;
+	}
+
+	if (down_trylock(&mddi_host_mutex) != 0)
+		return FALSE;
+
+	curr_llist_idx = mddi_get_next_free_llist_item(host, FALSE);
+	if (curr_llist_idx == UNASSIGNED_INDEX) {
+		up(&mddi_host_mutex);
+		return FALSE;
+	}
+
+	curr_llist_ptr = &llist_extern[host][curr_llist_idx];
+	curr_llist_dma_ptr = &llist_dma_extern[host][curr_llist_idx];
+
+	curr_llist_ptr->link_controller_flags = 1;
+	curr_llist_ptr->packet_header_count = 14;
+	curr_llist_ptr->packet_data_count = 4;
+
+	curr_llist_ptr->next_packet_pointer = NULL;
+	curr_llist_ptr->reserved = 0;
+
+	regacc_pkt_ptr = &curr_llist_ptr->packet_header.register_pkt;
+
+	regacc_pkt_ptr->packet_length = curr_llist_ptr->packet_header_count + 4;
+	regacc_pkt_ptr->packet_type = 146;	/* register access packet */
+	regacc_pkt_ptr->bClient_ID = 0;
+	regacc_pkt_ptr->read_write_info = 0x0001;
+	regacc_pkt_ptr->register_address = reg_addr;
+	regacc_pkt_ptr->register_data_list = reg_val;
+
+	regacc_pkt_ptr = &curr_llist_dma_ptr->packet_header.register_pkt;
+	curr_llist_ptr->packet_data_pointer =
+	    (void *)(&(regacc_pkt_ptr->register_data_list));
+
+	/* now adjust pointers */
+	mddi_queue_forward_packets(curr_llist_idx, curr_llist_idx, FALSE,
+				   done_cb, host);
+	up(&mddi_host_mutex);
+
+	return TRUE;
+
+}				/* mddi_host_register_write */
+
+void mddi_wait(uint16 time_ms)
+{
+	mdelay(time_ms);
+}
+
+void mddi_client_lcd_vsync_detected(boolean detected)
+{
+	if (mddi_lcd.vsync_detected)
+		(*mddi_lcd.vsync_detected) (detected);
+}
+
+/* extended version of function includes done callback */
+void mddi_window_adjust_ext(struct msm_fb_data_type *mfd,
+			    uint16 x1,
+			    uint16 x2,
+			    uint16 y1,
+			    uint16 y2, mddi_llist_done_cb_type done_cb)
+{
+#ifdef FEATURE_MDDI_HITACHI
+	if (mfd->panel.id == HITACHI)
+		mddi_hitachi_window_adjust(x1, x2, y1, y2);
+#elif defined(FEATURE_MDDI_S6D0142)
+	if (mfd->panel.id == MDDI_LCD_S6D0142)
+		mddi_s6d0142_window_adjust(x1, x2, y1, y2, done_cb);
+#else
+	/* Do nothing then... except avoid lint/compiler warnings */
+	(void)x1;
+	(void)x2;
+	(void)y1;
+	(void)y2;
+	(void)done_cb;
+#endif
+}
+
+void mddi_window_adjust(struct msm_fb_data_type *mfd,
+			uint16 x1, uint16 x2, uint16 y1, uint16 y2)
+{
+	mddi_window_adjust_ext(mfd, x1, x2, y1, y2, NULL);
+}
diff --git a/drivers/staging/msm/mddihost.h b/drivers/staging/msm/mddihost.h
new file mode 100644
index 0000000..20b8178
--- /dev/null
+++ b/drivers/staging/msm/mddihost.h
@@ -0,0 +1,225 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOST_H
+#define MDDIHOST_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+
+#undef FEATURE_MDDI_MC4
+#undef FEATURE_MDDI_S6D0142
+#undef FEATURE_MDDI_HITACHI
+#define FEATURE_MDDI_SHARP
+#define FEATURE_MDDI_TOSHIBA
+#undef FEATURE_MDDI_E751
+#define FEATURE_MDDI_CORONA
+#define FEATURE_MDDI_PRISM
+
+#define T_MSM7500
+
+typedef enum {
+	format_16bpp,
+	format_18bpp,
+	format_24bpp
+} mddi_video_format;
+
+typedef enum {
+	MDDI_LCD_NONE = 0,
+	MDDI_LCD_MC4,
+	MDDI_LCD_S6D0142,
+	MDDI_LCD_SHARP,
+	MDDI_LCD_E751,
+	MDDI_LCD_CORONA,
+	MDDI_LCD_HITACHI,
+	MDDI_LCD_TOSHIBA,
+	MDDI_LCD_PRISM,
+	MDDI_LCD_TP2,
+	MDDI_NUM_LCD_TYPES,
+	MDDI_LCD_DEFAULT = MDDI_LCD_TOSHIBA
+} mddi_lcd_type;
+
+typedef enum {
+	MDDI_HOST_PRIM = 0,
+	MDDI_HOST_EXT,
+	MDDI_NUM_HOST_CORES
+} mddi_host_type;
+
+typedef enum {
+	MDDI_DRIVER_RESET,	/* host core registers have not been written. */
+	MDDI_DRIVER_DISABLED,	/* registers written, interrupts disabled. */
+	MDDI_DRIVER_ENABLED	/* registers written, interrupts enabled. */
+} mddi_host_driver_state_type;
+
+typedef enum {
+	MDDI_GPIO_INT_0 = 0,
+	MDDI_GPIO_INT_1,
+	MDDI_GPIO_INT_2,
+	MDDI_GPIO_INT_3,
+	MDDI_GPIO_INT_4,
+	MDDI_GPIO_INT_5,
+	MDDI_GPIO_INT_6,
+	MDDI_GPIO_INT_7,
+	MDDI_GPIO_INT_8,
+	MDDI_GPIO_INT_9,
+	MDDI_GPIO_INT_10,
+	MDDI_GPIO_INT_11,
+	MDDI_GPIO_INT_12,
+	MDDI_GPIO_INT_13,
+	MDDI_GPIO_INT_14,
+	MDDI_GPIO_INT_15,
+	MDDI_GPIO_NUM_INTS
+} mddi_gpio_int_type;
+
+enum mddi_data_packet_size_type {
+	MDDI_DATA_PACKET_4_BYTES  = 4,
+	MDDI_DATA_PACKET_8_BYTES  = 8,
+	MDDI_DATA_PACKET_12_BYTES = 12,
+	MDDI_DATA_PACKET_16_BYTES = 16,
+	MDDI_DATA_PACKET_24_BYTES = 24
+};
+
+typedef struct {
+	uint32 addr;
+	uint32 value;
+} mddi_reg_write_type;
+
+boolean mddi_vsync_set_handler(msm_fb_vsync_handler_type handler, void *arg);
+
+typedef void (*mddi_llist_done_cb_type) (void);
+
+typedef void (*mddi_rev_handler_type) (void *);
+
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type);
+
+#define MDDI_DEFAULT_PRIM_PIX_ATTR 0xC3
+#define MDDI_DEFAULT_SECD_PIX_ATTR 0xC0
+
+typedef int gpio_int_polarity_type;
+typedef int gpio_int_handler_type;
+
+typedef struct {
+	void (*vsync_detected) (boolean);
+} mddi_lcd_func_type;
+
+extern mddi_lcd_func_type mddi_lcd;
+void mddi_init(void);
+
+void mddi_powerdown(void);
+
+void mddi_host_start_ext_display(void);
+void mddi_host_stop_ext_display(void);
+
+extern spinlock_t mddi_host_spin_lock;
+#ifdef T_MSM7500
+void mddi_reset(void);
+#ifdef FEATURE_DUAL_PROC_MODEM_DISPLAY
+void mddi_host_switch_proc_control(boolean on);
+#endif
+#endif
+void mddi_host_exit_power_collapse(void);
+
+void mddi_queue_splash_screen
+    (void *buf_ptr,
+     boolean clear_area,
+     int16 src_width,
+     int16 src_starting_row,
+     int16 src_starting_column,
+     int16 num_of_rows,
+     int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+void mddi_queue_image
+    (void *buf_ptr,
+     uint8 stereo_video,
+     boolean clear_area,
+     int16 src_width,
+     int16 src_starting_row,
+     int16 src_starting_column,
+     int16 num_of_rows,
+     int16 num_of_columns, int16 dst_starting_row, int16 dst_starting_column);
+
+int mddi_host_register_read
+    (uint32 reg_addr,
+     uint32 *reg_value_ptr, boolean wait, mddi_host_type host_idx);
+int mddi_host_register_write
+    (uint32 reg_addr, uint32 reg_val,
+     enum mddi_data_packet_size_type packet_size,
+     boolean wait, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_write_int
+    (uint32 reg_addr,
+     uint32 reg_val, mddi_llist_done_cb_type done_cb, mddi_host_type host);
+boolean mddi_host_register_read_int
+    (uint32 reg_addr, uint32 *reg_value_ptr, mddi_host_type host_idx);
+void mddi_queue_register_write_static
+    (uint32 reg_addr,
+     uint32 reg_val, boolean wait, mddi_llist_done_cb_type done_cb);
+void mddi_queue_static_window_adjust
+    (const mddi_reg_write_type *reg_write,
+     uint16 num_writes, mddi_llist_done_cb_type done_cb);
+
+#define mddi_queue_register_read(reg, val_ptr, wait, sig) \
+	mddi_host_register_read(reg, val_ptr, wait, MDDI_HOST_PRIM)
+#define mddi_queue_register_write(reg, val, wait, sig) \
+	mddi_host_register_write(reg, val, MDDI_DATA_PACKET_4_BYTES,\
+	wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_extn(reg, val, pkt_size, wait, sig) \
+	mddi_host_register_write(reg, val, pkt_size, \
+	wait, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_write_int(reg, val) \
+	mddi_host_register_write_int(reg, val, NULL, MDDI_HOST_PRIM)
+#define mddi_queue_register_read_int(reg, val_ptr) \
+	mddi_host_register_read_int(reg, val_ptr, MDDI_HOST_PRIM)
+#define mddi_queue_register_writes(reg_ptr, val, wait, sig) \
+	mddi_host_register_writes(reg_ptr, val, wait, sig, MDDI_HOST_PRIM)
+
+void mddi_wait(uint16 time_ms);
+void mddi_assign_max_pkt_dimensions(uint16 image_cols,
+				    uint16 image_rows,
+				    uint16 bpp,
+				    uint16 *max_cols, uint16 * max_rows);
+uint16 mddi_assign_pkt_height(uint16 pkt_width, uint16 pkt_height, uint16 bpp);
+void mddi_queue_reverse_encapsulation(boolean wait);
+void mddi_disable(int lock);
+#endif /* MDDIHOST_H */
diff --git a/drivers/staging/msm/mddihost_e.c b/drivers/staging/msm/mddihost_e.c
new file mode 100644
index 0000000..7de5eda
--- /dev/null
+++ b/drivers/staging/msm/mddihost_e.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#include <linux/clk.h>
+#include <mach/clk.h>
+
+extern struct semaphore mddi_host_mutex;
+static boolean mddi_host_ext_powered = FALSE;
+
+void mddi_host_start_ext_display(void)
+{
+	down(&mddi_host_mutex);
+
+	if (!mddi_host_ext_powered) {
+		mddi_host_init(MDDI_HOST_EXT);
+
+		mddi_host_ext_powered = TRUE;
+	}
+
+	up(&mddi_host_mutex);
+}
+
+void mddi_host_stop_ext_display(void)
+{
+	down(&mddi_host_mutex);
+
+	if (mddi_host_ext_powered) {
+		mddi_host_powerdown(MDDI_HOST_EXT);
+
+		mddi_host_ext_powered = FALSE;
+	}
+
+	up(&mddi_host_mutex);
+}
diff --git a/drivers/staging/msm/mddihosti.c b/drivers/staging/msm/mddihosti.c
new file mode 100644
index 0000000..f9d6e91
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.c
@@ -0,0 +1,2239 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "msm_fb_panel.h"
+#include "mddihost.h"
+#include "mddihosti.h"
+
+#define FEATURE_MDDI_UNDERRUN_RECOVERY
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr);
+#endif
+
+struct timer_list mddi_host_timer;
+
+#define MDDI_DEFAULT_TIMER_LENGTH 5000	/* 5 seconds */
+uint32 mddi_rtd_frequency = 60000;	/* send RTD every 60 seconds */
+uint32 mddi_client_status_frequency = 60000;	/* get status pkt every 60 secs */
+
+boolean mddi_vsync_detect_enabled = FALSE;
+mddi_gpio_info_type mddi_gpio;
+
+uint32 mddi_host_core_version;
+boolean mddi_debug_log_statistics = FALSE;
+/* #define FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION */
+/* default to TRUE in case MDP does not vote */
+static boolean mddi_host_mdp_active_flag = TRUE;
+static uint32 mddi_log_stats_counter;
+uint32 mddi_log_stats_frequency = 4000;
+
+#define MDDI_DEFAULT_REV_PKT_SIZE            0x20
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static boolean mddi_rev_ptr_workaround = TRUE;
+static uint32 mddi_reg_read_retry;
+static uint32 mddi_reg_read_retry_max = 20;
+static boolean mddi_enable_reg_read_retry = TRUE;
+static boolean mddi_enable_reg_read_retry_once = FALSE;
+
+#define MDDI_MAX_REV_PKT_SIZE                0x60
+
+#define MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE  0x60
+
+#define MDDI_VIDEO_REV_PKT_SIZE              0x40
+#define MDDI_REV_BUFFER_SIZE  MDDI_MAX_REV_PKT_SIZE
+static byte rev_packet_data[MDDI_MAX_REV_PKT_SIZE];
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+/* leave these variables so graphics will compile */
+
+#define MDDI_MAX_REV_DATA_SIZE  128
+/*lint -d__align(x) */
+boolean mddi_debug_clear_rev_data = TRUE;
+
+uint32 *mddi_reg_read_value_ptr;
+
+mddi_client_capability_type mddi_client_capability_pkt;
+static boolean mddi_client_capability_request = FALSE;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+
+#define MAX_MDDI_REV_HANDLERS 2
+#define INVALID_PKT_TYPE 0xFFFF
+
+typedef struct {
+	mddi_rev_handler_type handler;	/* ISR to be executed */
+	uint16 pkt_type;
+} mddi_rev_pkt_handler_type;
+static mddi_rev_pkt_handler_type mddi_rev_pkt_handler[MAX_MDDI_REV_HANDLERS] =
+    { {NULL, INVALID_PKT_TYPE}, {NULL, INVALID_PKT_TYPE} };
+
+static boolean mddi_rev_encap_user_request = FALSE;
+static mddi_linked_list_notify_type mddi_rev_user;
+
+spinlock_t mddi_host_spin_lock;
+extern uint32 mdp_in_processing;
+#endif
+
+typedef enum {
+	MDDI_REV_IDLE
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	    , MDDI_REV_REG_READ_ISSUED,
+	MDDI_REV_REG_READ_SENT,
+	MDDI_REV_ENCAP_ISSUED,
+	MDDI_REV_STATUS_REQ_ISSUED,
+	MDDI_REV_CLIENT_CAP_ISSUED
+#endif
+} mddi_rev_link_state_type;
+
+typedef enum {
+	MDDI_LINK_DISABLED,
+	MDDI_LINK_HIBERNATING,
+	MDDI_LINK_ACTIVATING,
+	MDDI_LINK_ACTIVE
+} mddi_host_link_state_type;
+
+typedef struct {
+	uint32 count;
+	uint32 in_count;
+	uint32 disp_req_count;
+	uint32 state_change_count;
+	uint32 ll_done_count;
+	uint32 rev_avail_count;
+	uint32 error_count;
+	uint32 rev_encap_count;
+	uint32 llist_ptr_write_1;
+	uint32 llist_ptr_write_2;
+} mddi_host_int_type;
+
+typedef struct {
+	uint32 fwd_crc_count;
+	uint32 rev_crc_count;
+	uint32 pri_underflow;
+	uint32 sec_underflow;
+	uint32 rev_overflow;
+	uint32 pri_overwrite;
+	uint32 sec_overwrite;
+	uint32 rev_overwrite;
+	uint32 dma_failure;
+	uint32 rtd_failure;
+	uint32 reg_read_failure;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+	uint32 pri_underrun_detected;
+#endif
+} mddi_host_stat_type;
+
+typedef struct {
+	uint32 rtd_cnt;
+	uint32 rev_enc_cnt;
+	uint32 vid_cnt;
+	uint32 reg_acc_cnt;
+	uint32 cli_stat_cnt;
+	uint32 cli_cap_cnt;
+	uint32 reg_read_cnt;
+	uint32 link_active_cnt;
+	uint32 link_hibernate_cnt;
+	uint32 vsync_response_cnt;
+	uint32 fwd_crc_cnt;
+	uint32 rev_crc_cnt;
+} mddi_log_params_struct_type;
+
+typedef struct {
+	uint32 rtd_value;
+	uint32 rtd_counter;
+	uint32 client_status_cnt;
+	boolean rev_ptr_written;
+	uint8 *rev_ptr_start;
+	uint8 *rev_ptr_curr;
+	uint32 mddi_rev_ptr_write_val;
+	dma_addr_t rev_data_dma_addr;
+	uint16 rev_pkt_size;
+	mddi_rev_link_state_type rev_state;
+	mddi_host_link_state_type link_state;
+	mddi_host_driver_state_type driver_state;
+	boolean disable_hibernation;
+	uint32 saved_int_reg;
+	uint32 saved_int_en;
+	mddi_linked_list_type *llist_ptr;
+	dma_addr_t llist_dma_addr;
+	mddi_linked_list_type *llist_dma_ptr;
+	uint32 *rev_data_buf;
+	struct completion mddi_llist_avail_comp;
+	boolean mddi_waiting_for_llist_avail;
+	mddi_host_int_type int_type;
+	mddi_host_stat_type stats;
+	mddi_log_params_struct_type log_parms;
+	mddi_llist_info_type llist_info;
+	mddi_linked_list_notify_type llist_notify[MDDI_MAX_NUM_LLIST_ITEMS];
+} mddi_host_cntl_type;
+
+static mddi_host_type mddi_curr_host = MDDI_HOST_PRIM;
+static mddi_host_cntl_type mhctl[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_type *llist_dma_extern[MDDI_NUM_HOST_CORES];
+mddi_linked_list_notify_type *llist_extern_notify[MDDI_NUM_HOST_CORES];
+static mddi_log_params_struct_type prev_parms[MDDI_NUM_HOST_CORES];
+
+extern uint32 mdp_total_vdopkts;
+
+static boolean mddi_host_io_clock_on = FALSE;
+static boolean mddi_host_hclk_on = FALSE;
+
+int int_mddi_pri_flag = FALSE;
+int int_mddi_ext_flag = FALSE;
+
+static void mddi_report_errors(uint32 int_reg)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (int_reg & MDDI_INT_PRI_UNDERFLOW) {
+		pmhctl->stats.pri_underflow++;
+		MDDI_MSG_ERR("!!! MDDI Primary Underflow !!!\n");
+	}
+	if (int_reg & MDDI_INT_SEC_UNDERFLOW) {
+		pmhctl->stats.sec_underflow++;
+		MDDI_MSG_ERR("!!! MDDI Secondary Underflow !!!\n");
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_OVERFLOW) {
+		pmhctl->stats.rev_overflow++;
+		MDDI_MSG_ERR("!!! MDDI Reverse Overflow !!!\n");
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+		mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+
+	}
+	if (int_reg & MDDI_INT_CRC_ERROR)
+		MDDI_MSG_ERR("!!! MDDI Reverse CRC Error !!!\n");
+#endif
+	if (int_reg & MDDI_INT_PRI_OVERWRITE) {
+		pmhctl->stats.pri_overwrite++;
+		MDDI_MSG_ERR("!!! MDDI Primary Overwrite !!!\n");
+	}
+	if (int_reg & MDDI_INT_SEC_OVERWRITE) {
+		pmhctl->stats.sec_overwrite++;
+		MDDI_MSG_ERR("!!! MDDI Secondary Overwrite !!!\n");
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_OVERWRITE) {
+		pmhctl->stats.rev_overwrite++;
+		/* This will show up normally and is not a problem */
+		MDDI_MSG_DEBUG("MDDI Reverse Overwrite!\n");
+	}
+	if (int_reg & MDDI_INT_RTD_FAILURE) {
+		mddi_host_reg_outm(INTEN, MDDI_INT_RTD_FAILURE, 0);
+		pmhctl->stats.rtd_failure++;
+		MDDI_MSG_ERR("!!! MDDI RTD Failure !!!\n");
+	}
+#endif
+	if (int_reg & MDDI_INT_DMA_FAILURE) {
+		pmhctl->stats.dma_failure++;
+		MDDI_MSG_ERR("!!! MDDI DMA Abort !!!\n");
+	}
+}
+
+static void mddi_host_enable_io_clock(void)
+{
+	if (!MDDI_HOST_IS_IO_CLOCK_ON)
+		MDDI_HOST_ENABLE_IO_CLOCK;
+}
+
+static void mddi_host_enable_hclk(void)
+{
+
+	if (!MDDI_HOST_IS_HCLK_ON)
+		MDDI_HOST_ENABLE_HCLK;
+}
+
+static void mddi_host_disable_io_clock(void)
+{
+#ifndef FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+	if (MDDI_HOST_IS_IO_CLOCK_ON)
+		MDDI_HOST_DISABLE_IO_CLOCK;
+#endif
+}
+
+static void mddi_host_disable_hclk(void)
+{
+#ifndef FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+	if (MDDI_HOST_IS_HCLK_ON)
+		MDDI_HOST_DISABLE_HCLK;
+#endif
+}
+
+static void mddi_vote_to_sleep(mddi_host_type host_idx, boolean sleep)
+{
+	uint16 vote_mask;
+
+	if (host_idx == MDDI_HOST_PRIM)
+		vote_mask = 0x01;
+	else
+		vote_mask = 0x02;
+}
+
+static void mddi_report_state_change(uint32 int_reg)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if ((pmhctl->saved_int_reg & MDDI_INT_IN_HIBERNATION) &&
+	    (pmhctl->saved_int_reg & MDDI_INT_LINK_ACTIVE)) {
+		/* recover from condition where the io_clock was turned off by the
+		   clock driver during a transition to hibernation. The io_clock
+		   disable is to prevent MDP/MDDI underruns when changing ARM
+		   clock speeds. In the process of halting the ARM, the hclk
+		   divider needs to be set to 1. When it is set to 1, there is
+		   a small time (usecs) when hclk is off or slow, and this can
+		   cause an underrun. To prevent the underrun, clock driver turns
+		   off the MDDI io_clock before making the change. */
+		mddi_host_reg_out(CMD, MDDI_CMD_POWERUP);
+	}
+
+	if (int_reg & MDDI_INT_LINK_ACTIVE) {
+		pmhctl->link_state = MDDI_LINK_ACTIVE;
+		pmhctl->log_parms.link_active_cnt++;
+		pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+		MDDI_MSG_DEBUG("!!! MDDI Active RTD:0x%x!!!\n",
+			       pmhctl->rtd_value);
+		/* now interrupt on hibernation */
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   MDDI_INT_IN_HIBERNATION);
+
+#ifdef DEBUG_MDDIHOSTI
+		/* if gpio interrupt is enabled, start polling at fastest
+		 * registered rate
+		 */
+		if (mddi_gpio.polling_enabled) {
+			timer_reg(&mddi_gpio_poll_timer,
+		mddi_gpio_poll_timer_cb, 0, mddi_gpio.polling_interval, 0);
+		}
+#endif
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (mddi_rev_ptr_workaround) {
+			/* HW CR: need to reset reverse register stuff */
+			pmhctl->rev_ptr_written = FALSE;
+			pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+		}
+#endif
+		/* vote on sleep */
+		mddi_vote_to_sleep(host_idx, FALSE);
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (mddi_vsync_detect_enabled) {
+				/*
+				 * Indicate to client specific code that vsync
+				 * was enabled, but we did not detect a client
+				 * intiated wakeup. The client specific
+				 * handler can either reassert vsync detection,
+				 * or treat this as a valid vsync.
+				 */
+				mddi_client_lcd_vsync_detected(FALSE);
+				pmhctl->log_parms.vsync_response_cnt++;
+			}
+		}
+	}
+	if (int_reg & MDDI_INT_IN_HIBERNATION) {
+		pmhctl->link_state = MDDI_LINK_HIBERNATING;
+		pmhctl->log_parms.link_hibernate_cnt++;
+		MDDI_MSG_DEBUG("!!! MDDI Hibernating !!!\n");
+		/* now interrupt on link_active */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_MDDI_IN |
+				    MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   MDDI_INT_LINK_ACTIVE);
+#else
+		mddi_host_reg_outm(INTEN,
+				   (MDDI_INT_MDDI_IN |
+				    MDDI_INT_IN_HIBERNATION |
+				    MDDI_INT_LINK_ACTIVE),
+				   (MDDI_INT_MDDI_IN | MDDI_INT_LINK_ACTIVE));
+
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+
+		if (pmhctl->rev_state != MDDI_REV_IDLE) {
+			/* a rev_encap will not wake up the link, so we do that here */
+			pmhctl->link_state = MDDI_LINK_ACTIVATING;
+			mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+		}
+#endif
+
+		if (pmhctl->disable_hibernation) {
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+			mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			pmhctl->link_state = MDDI_LINK_ACTIVATING;
+		}
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+		if ((pmhctl->llist_info.transmitting_start_idx !=
+		     UNASSIGNED_INDEX)
+		    &&
+		    ((pmhctl->
+		      saved_int_reg & (MDDI_INT_PRI_LINK_LIST_DONE |
+				       MDDI_INT_PRI_PTR_READ)) ==
+		     MDDI_INT_PRI_PTR_READ)) {
+			mddi_linked_list_type *llist_dma;
+			llist_dma = pmhctl->llist_dma_ptr;
+			/*
+			 * All indications are that we have not received a
+			 * linked list done interrupt, due to an underrun
+			 * condition. Recovery attempt is to send again.
+			 */
+			dma_coherent_pre_ops();
+			/* Write to primary pointer register again */
+			mddi_host_reg_out(PRI_PTR,
+					  &llist_dma[pmhctl->llist_info.
+						     transmitting_start_idx]);
+			pmhctl->stats.pri_underrun_detected++;
+		}
+#endif
+
+		/* vote on sleep */
+		if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+			mddi_vote_to_sleep(host_idx, TRUE);
+		}
+
+#ifdef DEBUG_MDDIHOSTI
+		/* need to stop polling timer */
+		if (mddi_gpio.polling_enabled) {
+			(void) timer_clr(&mddi_gpio_poll_timer, T_NONE);
+		}
+#endif
+	}
+}
+
+void mddi_host_timer_service(unsigned long data)
+{
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	unsigned long flags;
+#endif
+	mddi_host_type host_idx;
+	mddi_host_cntl_type *pmhctl;
+
+	unsigned long time_ms = MDDI_DEFAULT_TIMER_LENGTH;
+	init_timer(&mddi_host_timer);
+	mddi_host_timer.function = mddi_host_timer_service;
+	mddi_host_timer.data = 0;
+
+	mddi_host_timer.expires = jiffies + ((time_ms * HZ) / 1000);
+	add_timer(&mddi_host_timer);
+
+	for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+	     host_idx++) {
+		pmhctl = &(mhctl[host_idx]);
+		mddi_log_stats_counter += (uint32) time_ms;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		pmhctl->rtd_counter += (uint32) time_ms;
+		pmhctl->client_status_cnt += (uint32) time_ms;
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (pmhctl->client_status_cnt >=
+			    mddi_client_status_frequency) {
+				if ((pmhctl->link_state ==
+				     MDDI_LINK_HIBERNATING)
+				    && (pmhctl->client_status_cnt >
+					mddi_client_status_frequency)) {
+					/*
+					 * special case where we are hibernating
+					 * and mddi_host_isr is not firing, so
+					 * kick the link so that the status can
+					 * be retrieved
+					 */
+
+					/* need to wake up link before issuing
+					 * rev encap command
+					 */
+					MDDI_MSG_INFO("wake up link!\n");
+					spin_lock_irqsave(&mddi_host_spin_lock,
+							  flags);
+					mddi_host_enable_hclk();
+					mddi_host_enable_io_clock();
+					pmhctl->link_state =
+					    MDDI_LINK_ACTIVATING;
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_LINK_ACTIVE);
+					spin_unlock_irqrestore
+					    (&mddi_host_spin_lock, flags);
+				} else
+				    if ((pmhctl->link_state == MDDI_LINK_ACTIVE)
+					&& pmhctl->disable_hibernation) {
+					/*
+					 * special case where we have disabled
+					 * hibernation and mddi_host_isr
+					 * is not firing, so enable interrupt
+					 * for no pkts pending, which will
+					 * generate an interrupt
+					 */
+					MDDI_MSG_INFO("kick isr!\n");
+					spin_lock_irqsave(&mddi_host_spin_lock,
+							  flags);
+					mddi_host_enable_hclk();
+					mddi_host_reg_outm(INTEN,
+							   MDDI_INT_NO_CMD_PKTS_PEND,
+							   MDDI_INT_NO_CMD_PKTS_PEND);
+					spin_unlock_irqrestore
+					    (&mddi_host_spin_lock, flags);
+				}
+			}
+		}
+#endif /* #ifndef FEATURE_MDDI_DISABLE_REVERSE */
+	}
+
+	/* Check if logging is turned on */
+	for (host_idx = MDDI_HOST_PRIM; host_idx < MDDI_NUM_HOST_CORES;
+	     host_idx++) {
+		mddi_log_params_struct_type *prev_ptr = &(prev_parms[host_idx]);
+		pmhctl = &(mhctl[host_idx]);
+
+		if (mddi_debug_log_statistics) {
+
+			/* get video pkt count from MDP, since MDDI sw cannot know this */
+			pmhctl->log_parms.vid_cnt = mdp_total_vdopkts;
+
+			if (mddi_log_stats_counter >= mddi_log_stats_frequency) {
+				/* mddi_log_stats_counter = 0; */
+				if (mddi_debug_log_statistics) {
+					MDDI_MSG_NOTICE
+					    ("MDDI Statistics since last report:\n");
+					MDDI_MSG_NOTICE("  Packets sent:\n");
+					MDDI_MSG_NOTICE
+					    ("    %d RTD packet(s)\n",
+					     pmhctl->log_parms.rtd_cnt -
+					     prev_ptr->rtd_cnt);
+					if (prev_ptr->rtd_cnt !=
+					    pmhctl->log_parms.rtd_cnt) {
+						unsigned long flags;
+						spin_lock_irqsave
+						    (&mddi_host_spin_lock,
+						     flags);
+						mddi_host_enable_hclk();
+						pmhctl->rtd_value =
+						    mddi_host_reg_in(RTD_VAL);
+						spin_unlock_irqrestore
+						    (&mddi_host_spin_lock,
+						     flags);
+						MDDI_MSG_NOTICE
+						    ("      RTD value=%d\n",
+						     pmhctl->rtd_value);
+					}
+					MDDI_MSG_NOTICE
+					    ("    %d VIDEO packets\n",
+					     pmhctl->log_parms.vid_cnt -
+					     prev_ptr->vid_cnt);
+					MDDI_MSG_NOTICE
+					    ("    %d Register Access packets\n",
+					     pmhctl->log_parms.reg_acc_cnt -
+					     prev_ptr->reg_acc_cnt);
+					MDDI_MSG_NOTICE
+					    ("    %d Reverse Encapsulation packet(s)\n",
+					     pmhctl->log_parms.rev_enc_cnt -
+					     prev_ptr->rev_enc_cnt);
+					if (prev_ptr->rev_enc_cnt !=
+					    pmhctl->log_parms.rev_enc_cnt) {
+						/* report # of reverse CRC errors */
+						MDDI_MSG_NOTICE
+						    ("      %d reverse CRC errors detected\n",
+						     pmhctl->log_parms.
+						     rev_crc_cnt -
+						     prev_ptr->rev_crc_cnt);
+					}
+					MDDI_MSG_NOTICE
+					    ("  Packets received:\n");
+					MDDI_MSG_NOTICE
+					    ("    %d Client Status packets",
+					     pmhctl->log_parms.cli_stat_cnt -
+					     prev_ptr->cli_stat_cnt);
+					if (prev_ptr->cli_stat_cnt !=
+					    pmhctl->log_parms.cli_stat_cnt) {
+						MDDI_MSG_NOTICE
+						    ("      %d forward CRC errors reported\n",
+						     pmhctl->log_parms.
+						     fwd_crc_cnt -
+						     prev_ptr->fwd_crc_cnt);
+					}
+					MDDI_MSG_NOTICE
+					    ("    %d Register Access Read packets\n",
+					     pmhctl->log_parms.reg_read_cnt -
+					     prev_ptr->reg_read_cnt);
+
+					if (pmhctl->link_state ==
+					    MDDI_LINK_ACTIVE) {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Active\n");
+					} else
+					    if ((pmhctl->link_state ==
+						 MDDI_LINK_HIBERNATING)
+						|| (pmhctl->link_state ==
+						    MDDI_LINK_ACTIVATING)) {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Hibernation\n");
+					} else {
+						MDDI_MSG_NOTICE
+						    ("  Current Link Status: Inactive\n");
+					}
+					MDDI_MSG_NOTICE
+					    ("    Active state entered %d times\n",
+					     pmhctl->log_parms.link_active_cnt -
+					     prev_ptr->link_active_cnt);
+					MDDI_MSG_NOTICE
+					    ("    Hibernation state entered %d times\n",
+					     pmhctl->log_parms.
+					     link_hibernate_cnt -
+					     prev_ptr->link_hibernate_cnt);
+				}
+			}
+			prev_parms[host_idx] = pmhctl->log_parms;
+		}
+	}
+	if (mddi_log_stats_counter >= mddi_log_stats_frequency)
+		mddi_log_stats_counter = 0;
+
+	return;
+}				/* mddi_host_timer_cb */
+
+static void mddi_process_link_list_done(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	/* normal forward linked list packet(s) were sent */
+	if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+		MDDI_MSG_ERR("**** getting LL done, but no list ****\n");
+	} else {
+		uint16 idx;
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (pmhctl->rev_state == MDDI_REV_REG_READ_ISSUED) {
+			/* special case where a register read packet was sent */
+			pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+			if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+				MDDI_MSG_ERR
+				    ("**** getting LL done, but no list ****\n");
+			}
+		}
+#endif
+		for (idx = pmhctl->llist_info.transmitting_start_idx;;) {
+			uint16 next_idx = pmhctl->llist_notify[idx].next_idx;
+			/* with reg read we don't release the waiting tcb until after
+			 * the reverse encapsulation has completed.
+			 */
+			if (idx != pmhctl->llist_info.reg_read_idx) {
+				/* notify task that may be waiting on this completion */
+				if (pmhctl->llist_notify[idx].waiting) {
+					complete(&
+						 (pmhctl->llist_notify[idx].
+						  done_comp));
+				}
+				if (pmhctl->llist_notify[idx].done_cb != NULL) {
+					(*(pmhctl->llist_notify[idx].done_cb))
+					    ();
+				}
+
+				pmhctl->llist_notify[idx].in_use = FALSE;
+				pmhctl->llist_notify[idx].waiting = FALSE;
+				pmhctl->llist_notify[idx].done_cb = NULL;
+				if (idx < MDDI_NUM_DYNAMIC_LLIST_ITEMS) {
+					/* static LLIST items are configured only once */
+					pmhctl->llist_notify[idx].next_idx =
+					    UNASSIGNED_INDEX;
+				}
+				/*
+				 * currently, all linked list packets are
+				 * register access, so we can increment the
+				 * counter for that packet type here.
+				 */
+				pmhctl->log_parms.reg_acc_cnt++;
+			}
+			if (idx == pmhctl->llist_info.transmitting_end_idx)
+				break;
+			idx = next_idx;
+			if (idx == UNASSIGNED_INDEX)
+				MDDI_MSG_CRIT("MDDI linked list corruption!\n");
+		}
+
+		pmhctl->llist_info.transmitting_start_idx = UNASSIGNED_INDEX;
+		pmhctl->llist_info.transmitting_end_idx = UNASSIGNED_INDEX;
+
+		if (pmhctl->mddi_waiting_for_llist_avail) {
+			if (!
+			    (pmhctl->
+			     llist_notify[pmhctl->llist_info.next_free_idx].
+			     in_use)) {
+				pmhctl->mddi_waiting_for_llist_avail = FALSE;
+				complete(&(pmhctl->mddi_llist_avail_comp));
+			}
+		}
+	}
+
+	/* Turn off MDDI_INT_PRI_LINK_LIST_DONE interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE, 0);
+
+}
+
+static void mddi_queue_forward_linked_list(void)
+{
+	uint16 first_pkt_index;
+	mddi_linked_list_type *llist_dma;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+	llist_dma = pmhctl->llist_dma_ptr;
+
+	first_pkt_index = UNASSIGNED_INDEX;
+
+	if (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (pmhctl->llist_info.reg_read_waiting) {
+			if (pmhctl->rev_state == MDDI_REV_IDLE) {
+				/*
+				 * we have a register read to send and
+				 * can send it now
+				 */
+				pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+				mddi_reg_read_retry = 0;
+				first_pkt_index =
+				    pmhctl->llist_info.waiting_start_idx;
+				pmhctl->llist_info.reg_read_waiting = FALSE;
+			}
+		} else
+#endif
+		{
+			/*
+			 * not register read to worry about, go ahead and write
+			 * anything that may be on the waiting list.
+			 */
+			first_pkt_index = pmhctl->llist_info.waiting_start_idx;
+		}
+	}
+
+	if (first_pkt_index != UNASSIGNED_INDEX) {
+		pmhctl->llist_info.transmitting_start_idx =
+		    pmhctl->llist_info.waiting_start_idx;
+		pmhctl->llist_info.transmitting_end_idx =
+		    pmhctl->llist_info.waiting_end_idx;
+		pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+		pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+
+		/* write to the primary pointer register */
+		MDDI_MSG_DEBUG("MDDI writing primary ptr with idx=%d\n",
+			       first_pkt_index);
+
+		pmhctl->int_type.llist_ptr_write_2++;
+
+		dma_coherent_pre_ops();
+		mddi_host_reg_out(PRI_PTR, &llist_dma[first_pkt_index]);
+
+		/* enable interrupt when complete */
+		mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+				   MDDI_INT_PRI_LINK_LIST_DONE);
+
+	}
+
+}
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+static void mddi_read_rev_packet(byte *data_ptr)
+{
+	uint16 i, length;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	uint8 *rev_ptr_overflow =
+	    (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE);
+
+	/* first determine the length and handle invalid lengths */
+	length = *pmhctl->rev_ptr_curr++;
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	length |= ((*pmhctl->rev_ptr_curr++) << 8);
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	if (length > (pmhctl->rev_pkt_size - 2)) {
+		MDDI_MSG_ERR("Invalid rev pkt length %d\n", length);
+		/* rev_pkt_size should always be <= rev_ptr_size so limit to packet size */
+		length = pmhctl->rev_pkt_size - 2;
+	}
+
+	/* If the data pointer is NULL, just increment the pmhctl->rev_ptr_curr.
+	 * Loop around if necessary. Don't bother reading the data.
+	 */
+	if (data_ptr == NULL) {
+		pmhctl->rev_ptr_curr += length;
+		if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+			pmhctl->rev_ptr_curr -= MDDI_REV_BUFFER_SIZE;
+		return;
+	}
+
+	data_ptr[0] = length & 0x0ff;
+	data_ptr[1] = length >> 8;
+	data_ptr += 2;
+	/* copy the data to data_ptr byte-at-a-time */
+	for (i = 0; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow);
+	     i++)
+		*data_ptr++ = *pmhctl->rev_ptr_curr++;
+	if (pmhctl->rev_ptr_curr >= rev_ptr_overflow)
+		pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+	for (; (i < length) && (pmhctl->rev_ptr_curr < rev_ptr_overflow); i++)
+		*data_ptr++ = *pmhctl->rev_ptr_curr++;
+}
+
+static void mddi_process_rev_packets(void)
+{
+	uint32 rev_packet_count;
+	word i;
+	uint32 crc_errors;
+	boolean mddi_reg_read_successful = FALSE;
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	pmhctl->log_parms.rev_enc_cnt++;
+	if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_CLIENT_CAP_ISSUED)) {
+		MDDI_MSG_ERR("Wrong state %d for reverse int\n",
+			     pmhctl->rev_state);
+	}
+	/* Turn off MDDI_INT_REV_AVAIL interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL, 0);
+
+	/* Clear rev data avail int */
+	mddi_host_reg_out(INT, MDDI_INT_REV_DATA_AVAIL);
+
+	/* Get Number of packets */
+	rev_packet_count = mddi_host_reg_in(REV_PKT_CNT);
+
+#ifndef T_MSM7500
+	/* Clear out rev packet counter */
+	mddi_host_reg_out(REV_PKT_CNT, 0x0000);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+	if ((pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) &&
+	    (rev_packet_count > 0) &&
+	    (mddi_host_core_version == 0x28 ||
+	     mddi_host_core_version == 0x30)) {
+
+		uint32 int_reg;
+		uint32 max_count = 0;
+
+		mddi_host_reg_out(REV_PTR, pmhctl->mddi_rev_ptr_write_val);
+		int_reg = mddi_host_reg_in(INT);
+		while ((int_reg & 0x100000) == 0) {
+			udelay(3);
+			int_reg = mddi_host_reg_in(INT);
+			if (++max_count > 100)
+				break;
+		}
+	}
+#endif
+
+	/* Get CRC error count */
+	crc_errors = mddi_host_reg_in(REV_CRC_ERR);
+	if (crc_errors != 0) {
+		pmhctl->log_parms.rev_crc_cnt += crc_errors;
+		pmhctl->stats.rev_crc_count += crc_errors;
+		MDDI_MSG_ERR("!!! MDDI %d Reverse CRC Error(s) !!!\n",
+			     crc_errors);
+#ifndef T_MSM7500
+		/* Clear CRC error count */
+		mddi_host_reg_out(REV_CRC_ERR, 0x0000);
+#endif
+		/* also issue an RTD to attempt recovery */
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+	}
+
+	pmhctl->rtd_value = mddi_host_reg_in(RTD_VAL);
+
+	MDDI_MSG_DEBUG("MDDI rev pkt cnt=%d, ptr=0x%x, RTD:0x%x\n",
+		       rev_packet_count,
+		       pmhctl->rev_ptr_curr - pmhctl->rev_ptr_start,
+		       pmhctl->rtd_value);
+
+	if (rev_packet_count >= 1) {
+		mddi_invalidate_cache_lines((uint32 *) pmhctl->rev_ptr_start,
+					    MDDI_REV_BUFFER_SIZE);
+	}
+	/* order the reads */
+	dma_coherent_post_ops();
+	for (i = 0; i < rev_packet_count; i++) {
+		mddi_rev_packet_type *rev_pkt_ptr;
+
+		mddi_read_rev_packet(rev_packet_data);
+
+		rev_pkt_ptr = (mddi_rev_packet_type *) rev_packet_data;
+
+		if (rev_pkt_ptr->packet_length > pmhctl->rev_pkt_size) {
+			MDDI_MSG_ERR("!!!invalid packet size: %d\n",
+				     rev_pkt_ptr->packet_length);
+		}
+
+		MDDI_MSG_DEBUG("MDDI rev pkt 0x%x size 0x%x\n",
+			       rev_pkt_ptr->packet_type,
+			       rev_pkt_ptr->packet_length);
+
+		/* Do whatever you want to do with the data based on the packet type */
+		switch (rev_pkt_ptr->packet_type) {
+		case 66:	/* Client Capability */
+			{
+				mddi_client_capability_type
+				    *client_capability_pkt_ptr;
+
+				client_capability_pkt_ptr =
+				    (mddi_client_capability_type *)
+				    rev_packet_data;
+				MDDI_MSG_NOTICE
+				    ("Client Capability: Week=%d, Year=%d\n",
+				     client_capability_pkt_ptr->
+				     Week_of_Manufacture,
+				     client_capability_pkt_ptr->
+				     Year_of_Manufacture);
+				memcpy((void *)&mddi_client_capability_pkt,
+				       (void *)rev_packet_data,
+				       sizeof(mddi_client_capability_type));
+				pmhctl->log_parms.cli_cap_cnt++;
+			}
+			break;
+
+		case 70:	/* Display Status */
+			{
+				mddi_client_status_type *client_status_pkt_ptr;
+
+				client_status_pkt_ptr =
+				    (mddi_client_status_type *) rev_packet_data;
+				if ((client_status_pkt_ptr->crc_error_count !=
+				     0)
+				    || (client_status_pkt_ptr->
+					reverse_link_request != 0)) {
+					MDDI_MSG_ERR
+					    ("Client Status: RevReq=%d, CrcErr=%d\n",
+					     client_status_pkt_ptr->
+					     reverse_link_request,
+					     client_status_pkt_ptr->
+					     crc_error_count);
+				} else {
+					MDDI_MSG_DEBUG
+					    ("Client Status: RevReq=%d, CrcErr=%d\n",
+					     client_status_pkt_ptr->
+					     reverse_link_request,
+					     client_status_pkt_ptr->
+					     crc_error_count);
+				}
+				pmhctl->log_parms.fwd_crc_cnt +=
+				    client_status_pkt_ptr->crc_error_count;
+				pmhctl->stats.fwd_crc_count +=
+				    client_status_pkt_ptr->crc_error_count;
+				pmhctl->log_parms.cli_stat_cnt++;
+			}
+			break;
+
+		case 146:	/* register access packet */
+			{
+				mddi_register_access_packet_type
+				    * regacc_pkt_ptr;
+
+				regacc_pkt_ptr =
+				    (mddi_register_access_packet_type *)
+				    rev_packet_data;
+
+				MDDI_MSG_DEBUG
+				    ("Reg Acc parse reg=0x%x, value=0x%x\n",
+				     regacc_pkt_ptr->register_address,
+				     regacc_pkt_ptr->register_data_list);
+
+				/* Copy register value to location passed in */
+				if (mddi_reg_read_value_ptr) {
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+					/* only least significant 16 bits are valid with 6280 */
+					*mddi_reg_read_value_ptr =
+					    regacc_pkt_ptr->
+					    register_data_list & 0x0000ffff;
+#else
+					*mddi_reg_read_value_ptr =
+					    regacc_pkt_ptr->register_data_list;
+#endif
+					mddi_reg_read_successful = TRUE;
+					mddi_reg_read_value_ptr = NULL;
+				}
+
+#ifdef DEBUG_MDDIHOSTI
+				if ((mddi_gpio.polling_enabled) &&
+				    (regacc_pkt_ptr->register_address ==
+				     mddi_gpio.polling_reg)) {
+					/*
+					 * ToDo: need to call Linux GPIO call
+					 * here...
+					 */
+					 mddi_client_lcd_gpio_poll(
+					 regacc_pkt_ptr->register_data_list);
+				}
+#endif
+				pmhctl->log_parms.reg_read_cnt++;
+			}
+			break;
+
+		default:	/* any other packet */
+			{
+				uint16 hdlr;
+
+				for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS;
+				     hdlr++) {
+					if (mddi_rev_pkt_handler[hdlr].
+					    pkt_type ==
+					    rev_pkt_ptr->packet_type) {
+						(*
+						 (mddi_rev_pkt_handler[hdlr].
+						  handler)) (rev_pkt_ptr);
+					/* pmhctl->rev_state = MDDI_REV_IDLE; */
+						break;
+					}
+				}
+				if (hdlr >= MAX_MDDI_REV_HANDLERS)
+					MDDI_MSG_ERR("MDDI unknown rev pkt\n");
+			}
+			break;
+		}
+	}
+	if ((pmhctl->rev_ptr_curr + pmhctl->rev_pkt_size) >=
+	    (pmhctl->rev_ptr_start + MDDI_REV_BUFFER_SIZE)) {
+		pmhctl->rev_ptr_written = FALSE;
+	}
+
+	if (pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) {
+		pmhctl->rev_state = MDDI_REV_IDLE;
+		if (mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = FALSE;
+			complete(&(mddi_rev_user.done_comp));
+		} else if (pmhctl->llist_info.reg_read_idx == UNASSIGNED_INDEX) {
+			MDDI_MSG_ERR
+			    ("Reverse Encap state, but no reg read in progress\n");
+		} else {
+			if ((!mddi_reg_read_successful) &&
+			    (mddi_reg_read_retry < mddi_reg_read_retry_max) &&
+			    (mddi_enable_reg_read_retry)) {
+				/*
+				 * There is a race condition that can happen
+				 * where the reverse encapsulation message is
+				 * sent out by the MDDI host before the register
+				 * read packet is sent. As a work-around for
+				 * that problem we issue the reverse
+				 * encapsulation one more time before giving up.
+				 */
+				if (mddi_enable_reg_read_retry_once)
+					mddi_reg_read_retry =
+					    mddi_reg_read_retry_max;
+				pmhctl->rev_state = MDDI_REV_REG_READ_SENT;
+				pmhctl->stats.reg_read_failure++;
+			} else {
+				uint16 reg_read_idx =
+				    pmhctl->llist_info.reg_read_idx;
+
+				mddi_reg_read_retry = 0;
+				if (pmhctl->llist_notify[reg_read_idx].waiting) {
+					complete(&
+						 (pmhctl->
+						  llist_notify[reg_read_idx].
+						  done_comp));
+				}
+				pmhctl->llist_info.reg_read_idx =
+				    UNASSIGNED_INDEX;
+				if (pmhctl->llist_notify[reg_read_idx].
+				    done_cb != NULL) {
+					(*
+					 (pmhctl->llist_notify[reg_read_idx].
+					  done_cb)) ();
+				}
+				pmhctl->llist_notify[reg_read_idx].next_idx =
+				    UNASSIGNED_INDEX;
+				pmhctl->llist_notify[reg_read_idx].in_use =
+				    FALSE;
+				pmhctl->llist_notify[reg_read_idx].waiting =
+				    FALSE;
+				pmhctl->llist_notify[reg_read_idx].done_cb =
+				    NULL;
+				if (!mddi_reg_read_successful)
+					pmhctl->stats.reg_read_failure++;
+			}
+		}
+	} else if (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED) {
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+		if (mddi_host_core_version == 0x28 ||
+		    mddi_host_core_version == 0x30) {
+			mddi_host_reg_out(FIFO_ALLOC, 0x00);
+			pmhctl->rev_ptr_written = TRUE;
+			mddi_host_reg_out(REV_PTR,
+				pmhctl->mddi_rev_ptr_write_val);
+			pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+			mddi_host_reg_out(CMD, 0xC00);
+		}
+#endif
+
+		if (mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = FALSE;
+			complete(&(mddi_rev_user.done_comp));
+		}
+		pmhctl->rev_state = MDDI_REV_IDLE;
+	} else {
+		pmhctl->rev_state = MDDI_REV_IDLE;
+	}
+
+	/* pmhctl->rev_state = MDDI_REV_IDLE; */
+
+	/* Re-enable interrupt */
+	mddi_host_reg_outm(INTEN, MDDI_INT_REV_DATA_AVAIL,
+			   MDDI_INT_REV_DATA_AVAIL);
+
+}
+
+static void mddi_issue_reverse_encapsulation(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+	/* Only issue a reverse encapsulation packet if:
+	 * 1) another reverse is not in progress (MDDI_REV_IDLE).
+	 * 2) a register read has been sent (MDDI_REV_REG_READ_SENT).
+	 * 3) forward is not in progress, because of a hw bug in client that
+	 *    causes forward crc errors on packet immediately after rev encap.
+	 */
+	if (((pmhctl->rev_state == MDDI_REV_IDLE) ||
+	     (pmhctl->rev_state == MDDI_REV_REG_READ_SENT)) &&
+	    (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (!mdp_in_processing)) {
+		uint32 mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+
+		if ((pmhctl->rev_state == MDDI_REV_REG_READ_SENT) ||
+		    (mddi_rev_encap_user_request == TRUE)) {
+			mddi_host_enable_io_clock();
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				/* need to wake up link before issuing rev encap command */
+				MDDI_MSG_DEBUG("wake up link!\n");
+				pmhctl->link_state = MDDI_LINK_ACTIVATING;
+				mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			} else {
+				if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+					MDDI_MSG_DEBUG
+					    ("mddi sending RTD command!\n");
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_SEND_RTD);
+					pmhctl->rtd_counter = 0;
+					pmhctl->log_parms.rtd_cnt++;
+				}
+				if (pmhctl->rev_state != MDDI_REV_REG_READ_SENT) {
+					/* this is generic reverse request by user, so
+					 * reset the waiting flag. */
+					mddi_rev_encap_user_request = FALSE;
+				}
+				/* link is active so send reverse encap to get register read results */
+				pmhctl->rev_state = MDDI_REV_ENCAP_ISSUED;
+				mddi_command = MDDI_CMD_SEND_REV_ENCAP;
+				MDDI_MSG_DEBUG("sending rev encap!\n");
+			}
+		} else
+		    if ((pmhctl->client_status_cnt >=
+			 mddi_client_status_frequency)
+			|| mddi_client_capability_request) {
+			mddi_host_enable_io_clock();
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				/* only wake up the link if it client status is overdue */
+				if ((pmhctl->client_status_cnt >=
+				     (mddi_client_status_frequency * 2))
+				    || mddi_client_capability_request) {
+					/* need to wake up link before issuing rev encap command */
+					MDDI_MSG_DEBUG("wake up link!\n");
+					pmhctl->link_state =
+					    MDDI_LINK_ACTIVATING;
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_LINK_ACTIVE);
+				}
+			} else {
+				if (pmhctl->rtd_counter >= mddi_rtd_frequency) {
+					MDDI_MSG_DEBUG
+					    ("mddi sending RTD command!\n");
+					mddi_host_reg_out(CMD,
+							  MDDI_CMD_SEND_RTD);
+					pmhctl->rtd_counter = 0;
+					pmhctl->log_parms.rtd_cnt++;
+				}
+				/* periodically get client status */
+				MDDI_MSG_DEBUG
+				    ("mddi sending rev enc! (get status)\n");
+				if (mddi_client_capability_request) {
+					pmhctl->rev_state =
+					    MDDI_REV_CLIENT_CAP_ISSUED;
+					mddi_command = MDDI_CMD_GET_CLIENT_CAP;
+					mddi_client_capability_request = FALSE;
+				} else {
+					pmhctl->rev_state =
+					    MDDI_REV_STATUS_REQ_ISSUED;
+					pmhctl->client_status_cnt = 0;
+					mddi_command =
+					    MDDI_CMD_GET_CLIENT_STATUS;
+				}
+			}
+		}
+		if ((pmhctl->rev_state == MDDI_REV_ENCAP_ISSUED) ||
+		    (pmhctl->rev_state == MDDI_REV_STATUS_REQ_ISSUED) ||
+		    (pmhctl->rev_state == MDDI_REV_CLIENT_CAP_ISSUED)) {
+			pmhctl->int_type.rev_encap_count++;
+#if defined(T_MSM6280) && !defined(T_MSM7200)
+			mddi_rev_pointer_written = TRUE;
+			mddi_host_reg_out(REV_PTR, mddi_rev_ptr_write_val);
+			mddi_rev_ptr_curr = mddi_rev_ptr_start;
+			/* force new rev ptr command */
+			mddi_host_reg_out(CMD, 0xC00);
+#else
+			if (!pmhctl->rev_ptr_written) {
+				MDDI_MSG_DEBUG("writing reverse pointer!\n");
+				pmhctl->rev_ptr_written = TRUE;
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+				if ((pmhctl->rev_state ==
+				     MDDI_REV_CLIENT_CAP_ISSUED) &&
+				    (mddi_host_core_version == 0x28 ||
+				     mddi_host_core_version == 0x30)) {
+					pmhctl->rev_ptr_written = FALSE;
+					mddi_host_reg_out(FIFO_ALLOC, 0x02);
+				} else
+					mddi_host_reg_out(REV_PTR,
+						  pmhctl->
+						  mddi_rev_ptr_write_val);
+#else
+				mddi_host_reg_out(REV_PTR,
+						  pmhctl->
+						  mddi_rev_ptr_write_val);
+#endif
+			}
+#endif
+			if (mddi_debug_clear_rev_data) {
+				uint16 i;
+				for (i = 0; i < MDDI_MAX_REV_DATA_SIZE / 4; i++)
+					pmhctl->rev_data_buf[i] = 0xdddddddd;
+				/* clean cache */
+				mddi_flush_cache_lines(pmhctl->rev_data_buf,
+						       MDDI_MAX_REV_DATA_SIZE);
+			}
+
+			/* send reverse encapsulation to get needed data */
+			mddi_host_reg_out(CMD, mddi_command);
+		}
+	}
+
+}
+
+static void mddi_process_client_initiated_wakeup(void)
+{
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	/* Disable MDDI_INT Interrupt, we detect client initiated wakeup one
+	 * time for each entry into hibernation */
+	mddi_host_reg_outm(INTEN, MDDI_INT_MDDI_IN, 0);
+
+	if (host_idx == MDDI_HOST_PRIM) {
+		if (mddi_vsync_detect_enabled) {
+			mddi_host_enable_io_clock();
+#ifndef MDDI_HOST_DISP_LISTEN
+			/* issue command to bring up link */
+			/* need to do this to clear the vsync condition */
+			if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+				pmhctl->link_state = MDDI_LINK_ACTIVATING;
+				mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+			}
+#endif
+			/*
+			 * Indicate to client specific code that vsync was
+			 * enabled, and we did not detect a client initiated
+			 * wakeup. The client specific handler can clear the
+			 * condition if necessary to prevent subsequent
+			 * client initiated wakeups.
+			 */
+			mddi_client_lcd_vsync_detected(TRUE);
+			pmhctl->log_parms.vsync_response_cnt++;
+			MDDI_MSG_NOTICE("MDDI_INT_IN condition\n");
+
+		}
+	}
+
+	if (mddi_gpio.polling_enabled) {
+		mddi_host_enable_io_clock();
+		/* check interrupt status now */
+		(void)mddi_queue_register_read_int(mddi_gpio.polling_reg,
+						   &mddi_gpio.polling_val);
+	}
+}
+#endif /* FEATURE_MDDI_DISABLE_REVERSE */
+
+static void mddi_host_isr(void)
+{
+	uint32 int_reg, int_en;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	uint32 status_reg;
+#endif
+	mddi_host_type host_idx = mddi_curr_host;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (!MDDI_HOST_IS_HCLK_ON) {
+		MDDI_HOST_ENABLE_HCLK;
+		MDDI_MSG_DEBUG("HCLK disabled, but isr is firing\n");
+	}
+	int_reg = mddi_host_reg_in(INT);
+	int_en = mddi_host_reg_in(INTEN);
+	pmhctl->saved_int_reg = int_reg;
+	pmhctl->saved_int_en = int_en;
+	int_reg = int_reg & int_en;
+	pmhctl->int_type.count++;
+
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	status_reg = mddi_host_reg_in(STAT);
+
+	if ((int_reg & MDDI_INT_MDDI_IN) ||
+	    ((int_en & MDDI_INT_MDDI_IN) &&
+	     ((int_reg == 0) || (status_reg & MDDI_STAT_CLIENT_WAKEUP_REQ)))) {
+		/*
+		 * The MDDI_IN condition will clear itself, and so it is
+		 * possible that MDDI_IN was the reason for the isr firing,
+		 * even though the interrupt register does not have the
+		 * MDDI_IN bit set. To check if this was the case we need to
+		 * look at the status register bit that signifies a client
+		 * initiated wakeup. If the status register bit is set, as well
+		 * as the MDDI_IN interrupt enabled, then we treat this as a
+		 * client initiated wakeup.
+		 */
+		if (int_reg & MDDI_INT_MDDI_IN)
+			pmhctl->int_type.in_count++;
+		mddi_process_client_initiated_wakeup();
+	}
+#endif
+
+	if (int_reg & MDDI_INT_LINK_STATE_CHANGES) {
+		pmhctl->int_type.state_change_count++;
+		mddi_report_state_change(int_reg);
+	}
+
+	if (int_reg & MDDI_INT_PRI_LINK_LIST_DONE) {
+		pmhctl->int_type.ll_done_count++;
+		mddi_process_link_list_done();
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (int_reg & MDDI_INT_REV_DATA_AVAIL) {
+		pmhctl->int_type.rev_avail_count++;
+		mddi_process_rev_packets();
+	}
+#endif
+
+	if (int_reg & MDDI_INT_ERROR_CONDITIONS) {
+		pmhctl->int_type.error_count++;
+		mddi_report_errors(int_reg);
+
+		mddi_host_reg_out(INT, int_reg & MDDI_INT_ERROR_CONDITIONS);
+	}
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	mddi_issue_reverse_encapsulation();
+
+	if ((pmhctl->rev_state != MDDI_REV_ENCAP_ISSUED) &&
+	    (pmhctl->rev_state != MDDI_REV_STATUS_REQ_ISSUED))
+#endif
+		/* don't want simultaneous reverse and forward with Eagle */
+		mddi_queue_forward_linked_list();
+
+	if (int_reg & MDDI_INT_NO_CMD_PKTS_PEND) {
+		/* this interrupt is used to kick the isr when hibernation is disabled */
+		mddi_host_reg_outm(INTEN, MDDI_INT_NO_CMD_PKTS_PEND, 0);
+	}
+
+	if ((!mddi_host_mdp_active_flag) &&
+	    (!mddi_vsync_detect_enabled) &&
+	    (pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->rev_state == MDDI_REV_IDLE)) {
+		if (pmhctl->link_state == MDDI_LINK_HIBERNATING) {
+			mddi_host_disable_io_clock();
+			mddi_host_disable_hclk();
+		}
+#ifdef FEATURE_MDDI_HOST_ENABLE_EARLY_HIBERNATION
+		else if ((pmhctl->link_state == MDDI_LINK_ACTIVE) &&
+			 (!pmhctl->disable_hibernation)) {
+			mddi_host_reg_out(CMD, MDDI_CMD_POWERDOWN);
+		}
+#endif
+	}
+}
+
+static void mddi_host_isr_primary(void)
+{
+	mddi_curr_host = MDDI_HOST_PRIM;
+	mddi_host_isr();
+}
+
+irqreturn_t mddi_pmdh_isr_proxy(int irq, void *ptr)
+{
+	mddi_host_isr_primary();
+	return IRQ_HANDLED;
+}
+
+static void mddi_host_isr_external(void)
+{
+	mddi_curr_host = MDDI_HOST_EXT;
+	mddi_host_isr();
+	mddi_curr_host = MDDI_HOST_PRIM;
+}
+
+irqreturn_t mddi_emdh_isr_proxy(int irq, void *ptr)
+{
+	mddi_host_isr_external();
+	return IRQ_HANDLED;
+}
+
+static void mddi_host_initialize_registers(mddi_host_type host_idx)
+{
+	uint32 pad_reg_val;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+		return;
+
+	/* turn on HCLK to MDDI host core */
+	mddi_host_enable_hclk();
+
+	/* MDDI Reset command */
+	mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+	/* Version register (= 0x01) */
+	mddi_host_reg_out(VERSION, 0x0001);
+
+	/* Bytes per subframe register */
+	mddi_host_reg_out(BPS, MDDI_HOST_BYTES_PER_SUBFRAME);
+
+	/* Subframes per media frames register (= 0x03) */
+	mddi_host_reg_out(SPM, 0x0003);
+
+	/* Turn Around 1 register (= 0x05) */
+	mddi_host_reg_out(TA1_LEN, 0x0005);
+
+	/* Turn Around 2 register (= 0x0C) */
+	mddi_host_reg_out(TA2_LEN, MDDI_HOST_TA2_LEN);
+
+	/* Drive hi register (= 0x96) */
+	mddi_host_reg_out(DRIVE_HI, 0x0096);
+
+	/* Drive lo register (= 0x32) */
+	mddi_host_reg_out(DRIVE_LO, 0x0032);
+
+	/* Display wakeup count register (= 0x3c) */
+	mddi_host_reg_out(DISP_WAKE, 0x003c);
+
+	/* Reverse Rate Divisor register (= 0x2) */
+	mddi_host_reg_out(REV_RATE_DIV, MDDI_HOST_REV_RATE_DIV);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	/* Reverse Pointer Size */
+	mddi_host_reg_out(REV_SIZE, MDDI_REV_BUFFER_SIZE);
+
+	/* Rev Encap Size */
+	mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+#endif
+
+	/* Periodic Rev Encap */
+	/* don't send periodically */
+	mddi_host_reg_out(CMD, MDDI_CMD_PERIODIC_REV_ENCAP);
+
+	pad_reg_val = mddi_host_reg_in(PAD_CTL);
+	if (pad_reg_val == 0) {
+		/* If we are turning on band gap, need to wait 5us before turning
+		 * on the rest of the PAD */
+		mddi_host_reg_out(PAD_CTL, 0x08000);
+		udelay(5);
+	}
+#ifdef T_MSM7200
+	/* Recommendation from PAD hw team */
+	mddi_host_reg_out(PAD_CTL, 0xa850a);
+#else
+	/* Recommendation from PAD hw team */
+	mddi_host_reg_out(PAD_CTL, 0xa850f);
+#endif
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+	mddi_host_reg_out(PAD_IO_CTL, 0x00320000);
+	mddi_host_reg_out(PAD_CAL, 0x00220020);
+#endif
+
+	mddi_host_core_version = mddi_host_reg_inm(CORE_VER, 0xffff);
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	if (mddi_host_core_version >= 8)
+		mddi_rev_ptr_workaround = FALSE;
+	pmhctl->rev_ptr_curr = pmhctl->rev_ptr_start;
+#endif
+
+	if ((mddi_host_core_version > 8) && (mddi_host_core_version < 0x19))
+		mddi_host_reg_out(TEST, 0x2);
+
+	/* Need an even number for counts */
+	mddi_host_reg_out(DRIVER_START_CNT, 0x60006);
+
+#ifndef T_MSM7500
+	/* Setup defaults for MDP related register */
+	mddi_host_reg_out(MDP_VID_FMT_DES, 0x5666);
+	mddi_host_reg_out(MDP_VID_PIX_ATTR, 0x00C3);
+	mddi_host_reg_out(MDP_VID_CLIENTID, 0);
+#endif
+
+	/* automatically hibernate after 1 empty subframe */
+	if (pmhctl->disable_hibernation)
+		mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+	else
+		mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+	/* Bring up link if display (client) requests it */
+#ifdef MDDI_HOST_DISP_LISTEN
+	mddi_host_reg_out(CMD, MDDI_CMD_DISP_LISTEN);
+#else
+	mddi_host_reg_out(CMD, MDDI_CMD_DISP_IGNORE);
+#endif
+
+}
+
+void mddi_host_configure_interrupts(mddi_host_type host_idx, boolean enable)
+{
+	unsigned long flags;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	/* turn on HCLK to MDDI host core if it has been disabled */
+	mddi_host_enable_hclk();
+	/* Clear MDDI Interrupt enable reg */
+	mddi_host_reg_out(INTEN, 0);
+
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (enable) {
+		pmhctl->driver_state = MDDI_DRIVER_ENABLED;
+
+		if (host_idx == MDDI_HOST_PRIM) {
+			if (request_irq
+			    (INT_MDDI_PRI, mddi_pmdh_isr_proxy, IRQF_DISABLED,
+			     "PMDH", 0) != 0)
+				printk(KERN_ERR
+				       "a mddi: unable to request_irq\n");
+			else
+				int_mddi_pri_flag = TRUE;
+		} else {
+			if (request_irq
+			    (INT_MDDI_EXT, mddi_emdh_isr_proxy, IRQF_DISABLED,
+			     "EMDH", 0) != 0)
+				printk(KERN_ERR
+				       "b mddi: unable to request_irq\n");
+			else
+				int_mddi_ext_flag = TRUE;
+		}
+
+		/* Set MDDI Interrupt enable reg -- Enable Reverse data avail */
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+		mddi_host_reg_out(INTEN,
+				  MDDI_INT_ERROR_CONDITIONS |
+				  MDDI_INT_LINK_STATE_CHANGES);
+#else
+		/* Reverse Pointer register */
+		pmhctl->rev_ptr_written = FALSE;
+
+		mddi_host_reg_out(INTEN,
+				  MDDI_INT_REV_DATA_AVAIL |
+				  MDDI_INT_ERROR_CONDITIONS |
+				  MDDI_INT_LINK_STATE_CHANGES);
+		pmhctl->rtd_counter = mddi_rtd_frequency;
+		pmhctl->client_status_cnt = 0;
+#endif
+	} else {
+		if (pmhctl->driver_state == MDDI_DRIVER_ENABLED)
+			pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+	}
+
+}
+
+static void mddi_host_powerup(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (pmhctl->link_state != MDDI_LINK_DISABLED)
+		return;
+
+	/* enable IO_CLK and hclk to MDDI host core */
+	mddi_host_enable_io_clock();
+
+	mddi_host_initialize_registers(host_idx);
+	mddi_host_configure_interrupts(host_idx, TRUE);
+
+	pmhctl->link_state = MDDI_LINK_ACTIVATING;
+
+	/* Link activate command */
+	mddi_host_reg_out(CMD, MDDI_CMD_LINK_ACTIVE);
+
+#ifdef CLKRGM_MDDI_IO_CLOCK_IN_MHZ
+	MDDI_MSG_NOTICE("MDDI Host: Activating Link %d Mbps\n",
+			CLKRGM_MDDI_IO_CLOCK_IN_MHZ * 2);
+#else
+	MDDI_MSG_NOTICE("MDDI Host: Activating Link\n");
+#endif
+
+	/* Initialize the timer */
+	if (host_idx == MDDI_HOST_PRIM)
+		mddi_host_timer_service(0);
+}
+
+void mddi_host_init(mddi_host_type host_idx)
+/* Write out the MDDI configuration registers */
+{
+	static boolean initialized = FALSE;
+	mddi_host_cntl_type *pmhctl;
+
+	if (host_idx >= MDDI_NUM_HOST_CORES) {
+		MDDI_MSG_ERR("Invalid host core index\n");
+		return;
+	}
+
+	if (!initialized) {
+		uint16 idx;
+		mddi_host_type host;
+		for (host = MDDI_HOST_PRIM; host < MDDI_NUM_HOST_CORES; host++) {
+			pmhctl = &(mhctl[host]);
+			initialized = TRUE;
+
+			pmhctl->llist_ptr =
+			    dma_alloc_coherent(NULL, MDDI_LLIST_POOL_SIZE,
+					       &(pmhctl->llist_dma_addr),
+					       GFP_KERNEL);
+			pmhctl->llist_dma_ptr =
+			    (mddi_linked_list_type *) (void *)pmhctl->
+			    llist_dma_addr;
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+			pmhctl->rev_data_buf = NULL;
+			if (pmhctl->llist_ptr == NULL)
+#else
+			mddi_rev_user.waiting = FALSE;
+			init_completion(&(mddi_rev_user.done_comp));
+			pmhctl->rev_data_buf =
+			    dma_alloc_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+					       &(pmhctl->rev_data_dma_addr),
+					       GFP_KERNEL);
+			if ((pmhctl->llist_ptr == NULL)
+			    || (pmhctl->rev_data_buf == NULL))
+#endif
+			{
+				MDDI_MSG_CRIT
+				    ("unable to alloc non-cached memory\n");
+			}
+			llist_extern[host] = pmhctl->llist_ptr;
+			llist_dma_extern[host] = pmhctl->llist_dma_ptr;
+			llist_extern_notify[host] = pmhctl->llist_notify;
+
+			for (idx = 0; idx < UNASSIGNED_INDEX; idx++) {
+				init_completion(&
+						(pmhctl->llist_notify[idx].
+						 done_comp));
+			}
+			init_completion(&(pmhctl->mddi_llist_avail_comp));
+			spin_lock_init(&mddi_host_spin_lock);
+			pmhctl->mddi_waiting_for_llist_avail = FALSE;
+			pmhctl->mddi_rev_ptr_write_val =
+			    (uint32) (void *)(pmhctl->rev_data_dma_addr);
+			pmhctl->rev_ptr_start = (void *)pmhctl->rev_data_buf;
+
+			pmhctl->rev_pkt_size = MDDI_DEFAULT_REV_PKT_SIZE;
+			pmhctl->rev_state = MDDI_REV_IDLE;
+#ifdef IMAGE_MODEM_PROC
+			/* assume hibernation state is last state from APPS proc, so that
+			 * we don't reinitialize the host core */
+			pmhctl->link_state = MDDI_LINK_HIBERNATING;
+#else
+			pmhctl->link_state = MDDI_LINK_DISABLED;
+#endif
+			pmhctl->driver_state = MDDI_DRIVER_DISABLED;
+			pmhctl->disable_hibernation = FALSE;
+
+			/* initialize llist variables */
+			pmhctl->llist_info.transmitting_start_idx =
+			    UNASSIGNED_INDEX;
+			pmhctl->llist_info.transmitting_end_idx =
+			    UNASSIGNED_INDEX;
+			pmhctl->llist_info.waiting_start_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.waiting_end_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.reg_read_idx = UNASSIGNED_INDEX;
+			pmhctl->llist_info.next_free_idx =
+			    MDDI_FIRST_DYNAMIC_LLIST_IDX;
+			pmhctl->llist_info.reg_read_waiting = FALSE;
+
+			mddi_vsync_detect_enabled = FALSE;
+			mddi_gpio.polling_enabled = FALSE;
+
+			pmhctl->int_type.count = 0;
+			pmhctl->int_type.in_count = 0;
+			pmhctl->int_type.disp_req_count = 0;
+			pmhctl->int_type.state_change_count = 0;
+			pmhctl->int_type.ll_done_count = 0;
+			pmhctl->int_type.rev_avail_count = 0;
+			pmhctl->int_type.error_count = 0;
+			pmhctl->int_type.rev_encap_count = 0;
+			pmhctl->int_type.llist_ptr_write_1 = 0;
+			pmhctl->int_type.llist_ptr_write_2 = 0;
+
+			pmhctl->stats.fwd_crc_count = 0;
+			pmhctl->stats.rev_crc_count = 0;
+			pmhctl->stats.pri_underflow = 0;
+			pmhctl->stats.sec_underflow = 0;
+			pmhctl->stats.rev_overflow = 0;
+			pmhctl->stats.pri_overwrite = 0;
+			pmhctl->stats.sec_overwrite = 0;
+			pmhctl->stats.rev_overwrite = 0;
+			pmhctl->stats.dma_failure = 0;
+			pmhctl->stats.rtd_failure = 0;
+			pmhctl->stats.reg_read_failure = 0;
+#ifdef FEATURE_MDDI_UNDERRUN_RECOVERY
+			pmhctl->stats.pri_underrun_detected = 0;
+#endif
+
+			pmhctl->log_parms.rtd_cnt = 0;
+			pmhctl->log_parms.rev_enc_cnt = 0;
+			pmhctl->log_parms.vid_cnt = 0;
+			pmhctl->log_parms.reg_acc_cnt = 0;
+			pmhctl->log_parms.cli_stat_cnt = 0;
+			pmhctl->log_parms.cli_cap_cnt = 0;
+			pmhctl->log_parms.reg_read_cnt = 0;
+			pmhctl->log_parms.link_active_cnt = 0;
+			pmhctl->log_parms.link_hibernate_cnt = 0;
+			pmhctl->log_parms.fwd_crc_cnt = 0;
+			pmhctl->log_parms.rev_crc_cnt = 0;
+			pmhctl->log_parms.vsync_response_cnt = 0;
+
+			prev_parms[host_idx] = pmhctl->log_parms;
+			mddi_client_capability_pkt.packet_length = 0;
+		}
+
+#ifndef T_MSM7500
+		/* tell clock driver we are user of this PLL */
+		MDDI_HOST_ENABLE_IO_CLOCK;
+#endif
+	}
+
+	mddi_host_powerup(host_idx);
+	pmhctl = &(mhctl[host_idx]);
+}
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+static uint32 mddi_client_id;
+
+uint32 mddi_get_client_id(void)
+{
+
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	static boolean client_detection_try = FALSE;
+	mddi_host_cntl_type *pmhctl;
+	unsigned long flags;
+	uint16 saved_rev_pkt_size;
+
+	if (!client_detection_try) {
+		/* Toshiba display requires larger drive_lo value */
+		mddi_host_reg_out(DRIVE_LO, 0x0050);
+
+		pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+		saved_rev_pkt_size = pmhctl->rev_pkt_size;
+
+		/* Increase Rev Encap Size */
+		pmhctl->rev_pkt_size = MDDI_CLIENT_CAPABILITY_REV_PKT_SIZE;
+		mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+		/* disable hibernation temporarily */
+		if (!pmhctl->disable_hibernation)
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE);
+
+		mddi_rev_user.waiting = TRUE;
+		INIT_COMPLETION(mddi_rev_user.done_comp);
+
+		spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+		/* turn on clock(s), if they have been disabled */
+		mddi_host_enable_hclk();
+		mddi_host_enable_io_clock();
+
+		mddi_client_capability_request = TRUE;
+
+		if (pmhctl->rev_state == MDDI_REV_IDLE) {
+			/* attempt to send the reverse encapsulation now */
+			mddi_issue_reverse_encapsulation();
+		}
+		spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+		wait_for_completion_killable(&(mddi_rev_user.done_comp));
+
+		/* Set Rev Encap Size back to its original value */
+		pmhctl->rev_pkt_size = saved_rev_pkt_size;
+		mddi_host_reg_out(REV_ENCAP_SZ, pmhctl->rev_pkt_size);
+
+		/* reenable auto-hibernate */
+		if (!pmhctl->disable_hibernation)
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+
+		mddi_host_reg_out(DRIVE_LO, 0x0032);
+		client_detection_try = TRUE;
+
+		mddi_client_id = (mddi_client_capability_pkt.Mfr_Name<<16) |
+				mddi_client_capability_pkt.Product_Code;
+
+		if (!mddi_client_id)
+			mddi_disable(1);
+	}
+
+#if 0
+	switch (mddi_client_capability_pkt.Mfr_Name) {
+	case 0x4474:
+		if ((mddi_client_capability_pkt.Product_Code != 0x8960) &&
+		    (target == DISPLAY_1)) {
+			ret = PRISM_WVGA;
+		}
+		break;
+
+	case 0xD263:
+		if (target == DISPLAY_1)
+			ret = TOSHIBA_VGA_PRIM;
+		else if (target == DISPLAY_2)
+			ret = TOSHIBA_QCIF_SECD;
+		break;
+
+	case 0:
+		if (mddi_client_capability_pkt.Product_Code == 0x8835) {
+			if (target == DISPLAY_1)
+				ret = SHARP_QVGA_PRIM;
+			else if (target == DISPLAY_2)
+				ret = SHARP_128x128_SECD;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	if ((!client_detection_try) && (ret != TOSHIBA_VGA_PRIM)
+	    && (ret != TOSHIBA_QCIF_SECD)) {
+		/* Not a Toshiba display, so change drive_lo back to default value */
+		mddi_host_reg_out(DRIVE_LO, 0x0032);
+	}
+#endif
+
+#endif
+
+	return mddi_client_id;
+}
+#endif
+
+void mddi_host_powerdown(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if (host_idx >= MDDI_NUM_HOST_CORES) {
+		MDDI_MSG_ERR("Invalid host core index\n");
+		return;
+	}
+
+	if (pmhctl->driver_state == MDDI_DRIVER_RESET) {
+		return;
+	}
+
+	if (host_idx == MDDI_HOST_PRIM) {
+		/* disable timer */
+		del_timer(&mddi_host_timer);
+	}
+
+	mddi_host_configure_interrupts(host_idx, FALSE);
+
+	/* turn on HCLK to MDDI host core if it has been disabled */
+	mddi_host_enable_hclk();
+
+	/* MDDI Reset command */
+	mddi_host_reg_out(CMD, MDDI_CMD_RESET);
+
+	/* Pad Control Register */
+	mddi_host_reg_out(PAD_CTL, 0x0);
+
+	/* disable IO_CLK and hclk to MDDI host core */
+	mddi_host_disable_io_clock();
+	mddi_host_disable_hclk();
+
+	pmhctl->link_state = MDDI_LINK_DISABLED;
+	pmhctl->driver_state = MDDI_DRIVER_RESET;
+
+	MDDI_MSG_NOTICE("MDDI Host: Disabling Link\n");
+
+}
+
+uint16 mddi_get_next_free_llist_item(mddi_host_type host_idx, boolean wait)
+{
+	unsigned long flags;
+	uint16 ret_idx;
+	boolean forced_wait = FALSE;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	ret_idx = pmhctl->llist_info.next_free_idx;
+
+	pmhctl->llist_info.next_free_idx++;
+	if (pmhctl->llist_info.next_free_idx >= MDDI_NUM_DYNAMIC_LLIST_ITEMS)
+		pmhctl->llist_info.next_free_idx = MDDI_FIRST_DYNAMIC_LLIST_IDX;
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	if (pmhctl->llist_notify[ret_idx].in_use) {
+		if (!wait) {
+			pmhctl->llist_info.next_free_idx = ret_idx;
+			ret_idx = UNASSIGNED_INDEX;
+		} else {
+			forced_wait = TRUE;
+			INIT_COMPLETION(pmhctl->mddi_llist_avail_comp);
+		}
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (forced_wait) {
+		wait_for_completion_killable(&
+						  (pmhctl->
+						   mddi_llist_avail_comp));
+		MDDI_MSG_ERR("task waiting on mddi llist item\n");
+	}
+
+	if (ret_idx != UNASSIGNED_INDEX) {
+		pmhctl->llist_notify[ret_idx].waiting = FALSE;
+		pmhctl->llist_notify[ret_idx].done_cb = NULL;
+		pmhctl->llist_notify[ret_idx].in_use = TRUE;
+		pmhctl->llist_notify[ret_idx].next_idx = UNASSIGNED_INDEX;
+	}
+
+	return ret_idx;
+}
+
+uint16 mddi_get_reg_read_llist_item(mddi_host_type host_idx, boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)wait;
+	return FALSE;
+#else
+	unsigned long flags;
+	uint16 ret_idx;
+	boolean error = FALSE;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+	if (pmhctl->llist_info.reg_read_idx != UNASSIGNED_INDEX) {
+		/* need to block here or is this an error condition? */
+		error = TRUE;
+		ret_idx = UNASSIGNED_INDEX;
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (!error) {
+		ret_idx = pmhctl->llist_info.reg_read_idx =
+		    mddi_get_next_free_llist_item(host_idx, wait);
+		/* clear the reg_read_waiting flag */
+		pmhctl->llist_info.reg_read_waiting = FALSE;
+	}
+
+	if (error)
+		MDDI_MSG_ERR("***** Reg read still in progress! ****\n");
+	return ret_idx;
+#endif
+
+}
+
+void mddi_queue_forward_packets(uint16 first_llist_idx,
+				uint16 last_llist_idx,
+				boolean wait,
+				mddi_llist_done_cb_type llist_done_cb,
+				mddi_host_type host_idx)
+{
+	unsigned long flags;
+	mddi_linked_list_type *llist;
+	mddi_linked_list_type *llist_dma;
+	mddi_host_cntl_type *pmhctl = &(mhctl[host_idx]);
+
+	if ((first_llist_idx >= UNASSIGNED_INDEX) ||
+	    (last_llist_idx >= UNASSIGNED_INDEX)) {
+		MDDI_MSG_ERR("MDDI queueing invalid linked list\n");
+		return;
+	}
+
+	if (pmhctl->link_state == MDDI_LINK_DISABLED)
+		MDDI_MSG_CRIT("MDDI host powered down!\n");
+
+	llist = pmhctl->llist_ptr;
+	llist_dma = pmhctl->llist_dma_ptr;
+
+	/* clean cache so MDDI host can read data */
+	memory_barrier();
+
+	pmhctl->llist_notify[last_llist_idx].waiting = wait;
+	if (wait)
+		INIT_COMPLETION(pmhctl->llist_notify[last_llist_idx].done_comp);
+	pmhctl->llist_notify[last_llist_idx].done_cb = llist_done_cb;
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	if ((pmhctl->llist_info.transmitting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) &&
+	    (pmhctl->rev_state == MDDI_REV_IDLE)) {
+		/* no packets are currently transmitting */
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/* This is the special case where the packet is a register read. */
+			pmhctl->rev_state = MDDI_REV_REG_READ_ISSUED;
+			mddi_reg_read_retry = 0;
+			/* mddi_rev_reg_read_attempt = 1; */
+		}
+#endif
+		/* assign transmitting index values */
+		pmhctl->llist_info.transmitting_start_idx = first_llist_idx;
+		pmhctl->llist_info.transmitting_end_idx = last_llist_idx;
+
+		/* turn on clock(s), if they have been disabled */
+		mddi_host_enable_hclk();
+		mddi_host_enable_io_clock();
+		pmhctl->int_type.llist_ptr_write_1++;
+		/* Write to primary pointer register */
+		dma_coherent_pre_ops();
+		mddi_host_reg_out(PRI_PTR, &llist_dma[first_llist_idx]);
+
+		/* enable interrupt when complete */
+		mddi_host_reg_outm(INTEN, MDDI_INT_PRI_LINK_LIST_DONE,
+				   MDDI_INT_PRI_LINK_LIST_DONE);
+
+	} else if (pmhctl->llist_info.waiting_start_idx == UNASSIGNED_INDEX) {
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/*
+			 * we have a register read to send but need to wait
+			 * for current reverse activity to end or there are
+			 * packets currently transmitting
+			 */
+			/* mddi_rev_reg_read_attempt = 0; */
+			pmhctl->llist_info.reg_read_waiting = TRUE;
+		}
+#endif
+
+		/* assign waiting index values */
+		pmhctl->llist_info.waiting_start_idx = first_llist_idx;
+		pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+	} else {
+		uint16 prev_end_idx = pmhctl->llist_info.waiting_end_idx;
+#ifndef FEATURE_MDDI_DISABLE_REVERSE
+		if (first_llist_idx == pmhctl->llist_info.reg_read_idx) {
+			/*
+			 * we have a register read to send but need to wait
+			 * for current reverse activity to end or there are
+			 * packets currently transmitting
+			 */
+			/* mddi_rev_reg_read_attempt = 0; */
+			pmhctl->llist_info.reg_read_waiting = TRUE;
+		}
+#endif
+
+		llist = pmhctl->llist_ptr;
+
+		/* clear end flag in previous last packet */
+		llist[prev_end_idx].link_controller_flags = 0;
+		pmhctl->llist_notify[prev_end_idx].next_idx = first_llist_idx;
+
+		/* set the next_packet_pointer of the previous last packet */
+		llist[prev_end_idx].next_packet_pointer =
+		    (void *)(&llist_dma[first_llist_idx]);
+
+		/* clean cache so MDDI host can read data */
+		memory_barrier();
+
+		/* assign new waiting last index value */
+		pmhctl->llist_info.waiting_end_idx = last_llist_idx;
+	}
+
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+}
+
+void mddi_host_write_pix_attr_reg(uint32 value)
+{
+	(void)value;
+}
+
+void mddi_queue_reverse_encapsulation(boolean wait)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)wait;
+#else
+	unsigned long flags;
+	boolean error = FALSE;
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	/* turn on clock(s), if they have been disabled */
+	mddi_host_enable_hclk();
+	mddi_host_enable_io_clock();
+
+	if (wait) {
+		if (!mddi_rev_user.waiting) {
+			mddi_rev_user.waiting = TRUE;
+			INIT_COMPLETION(mddi_rev_user.done_comp);
+		} else
+			error = TRUE;
+	}
+	mddi_rev_encap_user_request = TRUE;
+
+	if (pmhctl->rev_state == MDDI_REV_IDLE) {
+		/* attempt to send the reverse encapsulation now */
+		mddi_host_type orig_host_idx = mddi_curr_host;
+		mddi_curr_host = host_idx;
+		mddi_issue_reverse_encapsulation();
+		mddi_curr_host = orig_host_idx;
+	}
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (error) {
+		MDDI_MSG_ERR("Reverse Encap request already in progress\n");
+	} else if (wait)
+		wait_for_completion_killable(&(mddi_rev_user.done_comp));
+#endif
+}
+
+/* ISR to be executed */
+boolean mddi_set_rev_handler(mddi_rev_handler_type handler, uint16 pkt_type)
+{
+#ifdef FEATURE_MDDI_DISABLE_REVERSE
+	MDDI_MSG_CRIT("No reverse link available\n");
+	(void)handler;
+	(void)pkt_type;
+	return (FALSE);
+#else
+	unsigned long flags;
+	uint16 hdlr;
+	boolean handler_set = FALSE;
+	boolean overwrite = FALSE;
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	/* Disable interrupts */
+	spin_lock_irqsave(&mddi_host_spin_lock, flags);
+
+	for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+		if (mddi_rev_pkt_handler[hdlr].pkt_type == pkt_type) {
+			mddi_rev_pkt_handler[hdlr].handler = handler;
+			if (handler == NULL) {
+				/* clearing handler from table */
+				mddi_rev_pkt_handler[hdlr].pkt_type =
+				    INVALID_PKT_TYPE;
+				handler_set = TRUE;
+				if (pkt_type == 0x10) {	/* video stream packet */
+					/* ensure HCLK on to MDDI host core before register write */
+					mddi_host_enable_hclk();
+					/* No longer getting video, so reset rev encap size to default */
+					pmhctl->rev_pkt_size =
+					    MDDI_DEFAULT_REV_PKT_SIZE;
+					mddi_host_reg_out(REV_ENCAP_SZ,
+							  pmhctl->rev_pkt_size);
+				}
+			} else {
+				/* already a handler for this packet */
+				overwrite = TRUE;
+			}
+			break;
+		}
+	}
+	if ((hdlr >= MAX_MDDI_REV_HANDLERS) && (handler != NULL)) {
+		/* assigning new handler */
+		for (hdlr = 0; hdlr < MAX_MDDI_REV_HANDLERS; hdlr++) {
+			if (mddi_rev_pkt_handler[hdlr].pkt_type ==
+			    INVALID_PKT_TYPE) {
+				if ((pkt_type == 0x10) &&	/* video stream packet */
+				    (pmhctl->rev_pkt_size <
+				     MDDI_VIDEO_REV_PKT_SIZE)) {
+					/* ensure HCLK on to MDDI host core before register write */
+					mddi_host_enable_hclk();
+					/* Increase Rev Encap Size */
+					pmhctl->rev_pkt_size =
+					    MDDI_VIDEO_REV_PKT_SIZE;
+					mddi_host_reg_out(REV_ENCAP_SZ,
+							  pmhctl->rev_pkt_size);
+				}
+				mddi_rev_pkt_handler[hdlr].handler = handler;
+				mddi_rev_pkt_handler[hdlr].pkt_type = pkt_type;
+				handler_set = TRUE;
+				break;
+			}
+		}
+	}
+
+	/* Restore interrupts */
+	spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+
+	if (overwrite)
+		MDDI_MSG_ERR("Overwriting previous rev packet handler\n");
+
+	return handler_set;
+
+#endif
+}				/* mddi_set_rev_handler */
+
+void mddi_host_disable_hibernation(boolean disable)
+{
+	mddi_host_type host_idx = MDDI_HOST_PRIM;
+	mddi_host_cntl_type *pmhctl = &(mhctl[MDDI_HOST_PRIM]);
+
+	if (disable) {
+		pmhctl->disable_hibernation = TRUE;
+		/* hibernation will be turned off by isr next time it is entered */
+	} else {
+		if (pmhctl->disable_hibernation) {
+			unsigned long flags;
+			spin_lock_irqsave(&mddi_host_spin_lock, flags);
+			if (!MDDI_HOST_IS_HCLK_ON)
+				MDDI_HOST_ENABLE_HCLK;
+			mddi_host_reg_out(CMD, MDDI_CMD_HIBERNATE | 1);
+			spin_unlock_irqrestore(&mddi_host_spin_lock, flags);
+			pmhctl->disable_hibernation = FALSE;
+		}
+	}
+}
+
+void mddi_mhctl_remove(mddi_host_type host_idx)
+{
+	mddi_host_cntl_type *pmhctl;
+
+	pmhctl = &(mhctl[host_idx]);
+
+	dma_free_coherent(NULL, MDDI_LLIST_POOL_SIZE, (void *)pmhctl->llist_ptr,
+			  pmhctl->llist_dma_addr);
+
+	dma_free_coherent(NULL, MDDI_MAX_REV_DATA_SIZE,
+			  (void *)pmhctl->rev_data_buf,
+			  pmhctl->rev_data_dma_addr);
+}
diff --git a/drivers/staging/msm/mddihosti.h b/drivers/staging/msm/mddihosti.h
new file mode 100644
index 0000000..7b26a42
--- /dev/null
+++ b/drivers/staging/msm/mddihosti.h
@@ -0,0 +1,547 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDDIHOSTI_H
+#define MDDIHOSTI_H
+
+#include "msm_fb.h"
+#include "mddihost.h"
+#include <linux/clk.h>
+
+/* Register offsets in MDDI, applies to both msm_pmdh_base and
+ * (u32)msm_emdh_base. */
+#define MDDI_CMD   		0x0000
+#define MDDI_VERSION   		0x0004
+#define MDDI_PRI_PTR		0x0008
+#define MDDI_BPS		0x0010
+#define MDDI_SPM		0x0014
+#define MDDI_INT		0x0018
+#define MDDI_INTEN		0x001c
+#define MDDI_REV_PTR		0x0020
+#define MDDI_REV_SIZE		0x0024
+#define MDDI_STAT		0x0028
+#define MDDI_REV_RATE_DIV	0x002c
+#define MDDI_REV_CRC_ERR	0x0030
+#define MDDI_TA1_LEN		0x0034
+#define MDDI_TA2_LEN		0x0038
+#define MDDI_TEST		0x0040
+#define MDDI_REV_PKT_CNT	0x0044
+#define MDDI_DRIVE_HI		0x0048
+#define MDDI_DRIVE_LO		0x004c
+#define MDDI_DISP_WAKE		0x0050
+#define MDDI_REV_ENCAP_SZ	0x0054
+#define MDDI_RTD_VAL		0x0058
+#define MDDI_PAD_CTL		0x0068
+#define MDDI_DRIVER_START_CNT	0x006c
+#define MDDI_CORE_VER		0x008c
+#define MDDI_FIFO_ALLOC         0x0090
+#define MDDI_PAD_IO_CTL         0x00a0
+#define MDDI_PAD_CAL            0x00a4
+
+extern u32 mddi_msg_level;
+
+/* No longer need to write to clear these registers */
+#define xxxx_mddi_host_reg_outm(reg, mask, val)  \
+do { \
+	if (host_idx == MDDI_HOST_PRIM) \
+		mddi_host_reg_outm_pmdh(reg, mask, val); \
+	else \
+		mddi_host_reg_outm_emdh(reg, mask, val); \
+} while (0)
+
+#define mddi_host_reg_outm(reg, mask, val) \
+do { \
+	unsigned long __addr; \
+	if (host_idx == MDDI_HOST_PRIM) \
+		__addr = (u32)msm_pmdh_base + MDDI_##reg; \
+	else \
+		__addr = (u32)msm_emdh_base + MDDI_##reg; \
+	writel((readl(__addr) & ~(mask)) | ((val) & (mask)), __addr); \
+} while (0)
+
+#define xxxx_mddi_host_reg_out(reg, val) \
+do { \
+	if (host_idx == MDDI_HOST_PRIM)  \
+		mddi_host_reg_out_pmdh(reg, val); \
+	else \
+		mddi_host_reg_out_emdh(reg, val); \
+	} while (0)
+
+#define mddi_host_reg_out(reg, val) \
+do { \
+	if (host_idx == MDDI_HOST_PRIM) \
+		writel(val, (u32)msm_pmdh_base + MDDI_##reg); \
+	else \
+		writel(val, (u32)msm_emdh_base + MDDI_##reg); \
+} while (0)
+
+#define xxxx_mddi_host_reg_in(reg)  \
+  ((host_idx) ? \
+     mddi_host_reg_in_emdh(reg) : mddi_host_reg_in_pmdh(reg));
+
+#define mddi_host_reg_in(reg) \
+((host_idx) ? \
+	readl((u32)msm_emdh_base + MDDI_##reg) : \
+	readl((u32)msm_pmdh_base + MDDI_##reg)) \
+
+#define xxxx_mddi_host_reg_inm(reg, mask)  \
+  ((host_idx) ? \
+    mddi_host_reg_inm_emdh(reg, mask) : \
+    mddi_host_reg_inm_pmdh(reg, mask);)
+
+#define mddi_host_reg_inm(reg, mask) \
+((host_idx) ? \
+	readl((u32)msm_emdh_base + MDDI_##reg) & (mask) : \
+	readl((u32)msm_pmdh_base + MDDI_##reg) & (mask)) \
+
+/* Using non-cacheable pmem, so do nothing */
+#define mddi_invalidate_cache_lines(addr_start, num_bytes)
+/*
+ * Using non-cacheable pmem, so do nothing with cache
+ * but, ensure write goes out to memory
+ */
+#define mddi_flush_cache_lines(addr_start, num_bytes)  \
+    (void) addr_start; \
+    (void) num_bytes;  \
+    memory_barrier()
+
+/* Since this translates to Remote Procedure Calls to check on clock status
+* just use a local variable to keep track of io_clock */
+#define MDDI_HOST_IS_IO_CLOCK_ON mddi_host_io_clock_on
+#define MDDI_HOST_ENABLE_IO_CLOCK
+#define MDDI_HOST_DISABLE_IO_CLOCK
+#define MDDI_HOST_IS_HCLK_ON mddi_host_hclk_on
+#define MDDI_HOST_ENABLE_HCLK
+#define MDDI_HOST_DISABLE_HCLK
+#define FEATURE_MDDI_HOST_IO_CLOCK_CONTROL_DISABLE
+#define FEATURE_MDDI_HOST_HCLK_CONTROL_DISABLE
+
+#define TRAMP_MDDI_HOST_ISR TRAMP_MDDI_PRI_ISR
+#define TRAMP_MDDI_HOST_EXT_ISR TRAMP_MDDI_EXT_ISR
+#define MDP_LINE_COUNT_BMSK  0x3ff
+#define MDP_SYNC_STATUS  0x000c
+#define MDP_LINE_COUNT      \
+(readl(msm_mdp_base + MDP_SYNC_STATUS) & MDP_LINE_COUNT_BMSK)
+
+/* MDP sends 256 pixel packets, so lower value hibernates more without
+* significantly increasing latency of waiting for next subframe */
+#define MDDI_HOST_BYTES_PER_SUBFRAME  0x3C00
+
+#if defined(CONFIG_FB_MSM_MDP31) || defined(CONFIG_FB_MSM_MDP40)
+#define MDDI_HOST_TA2_LEN       0x001a
+#define MDDI_HOST_REV_RATE_DIV  0x0004
+#else
+#define MDDI_HOST_TA2_LEN       0x000c
+#define MDDI_HOST_REV_RATE_DIV  0x0002
+#endif
+
+#define MDDI_MSG_EMERG(msg, ...)    \
+	if (mddi_msg_level > 0)  \
+		printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MDDI_MSG_ALERT(msg, ...)    \
+	if (mddi_msg_level > 1)  \
+		printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MDDI_MSG_CRIT(msg, ...)    \
+	if (mddi_msg_level > 2)  \
+		printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MDDI_MSG_ERR(msg, ...)    \
+	if (mddi_msg_level > 3)  \
+		printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MDDI_MSG_WARNING(msg, ...)    \
+	if (mddi_msg_level > 4)  \
+		printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MDDI_MSG_NOTICE(msg, ...)    \
+	if (mddi_msg_level > 5)  \
+		printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MDDI_MSG_INFO(msg, ...)    \
+	if (mddi_msg_level > 6)  \
+		printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MDDI_MSG_DEBUG(msg, ...)    \
+	if (mddi_msg_level > 7)  \
+		printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#define GCC_PACKED __attribute__((packed))
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 70 identifies the packet as
+		a Client status Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall
+		be set to zero. */
+
+} mddi_rev_packet_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 70 identifies the packet as
+		a Client status Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall
+		be set to zero. */
+
+	uint16 reverse_link_request;
+	/* 16 bit unsigned integer with number of bytes client
+		needs in the * reverse encapsulation message
+		to transmit data. */
+
+	uint8 crc_error_count;
+	uint8 capability_change;
+	uint16 graphics_busy_flags;
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all the bytes in the packet
+		including Packet Length. */
+
+} mddi_client_status_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including
+		the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 66 identifies the packet as
+		a Client Capability Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and
+		shall be set to zero. */
+
+	uint16 Protocol_Version;
+	uint16 Minimum_Protocol_Version;
+	uint16 Data_Rate_Capability;
+	uint8 Interface_Type_Capability;
+	uint8 Number_of_Alt_Displays;
+	uint16 PostCal_Data_Rate;
+	uint16 Bitmap_Width;
+	uint16 Bitmap_Height;
+	uint16 Display_Window_Width;
+	uint16 Display_Window_Height;
+	uint32 Color_Map_Size;
+	uint16 Color_Map_RGB_Width;
+	uint16 RGB_Capability;
+	uint8 Monochrome_Capability;
+	uint8 Reserved_1;
+	uint16 Y_Cb_Cr_Capability;
+	uint16 Bayer_Capability;
+	uint16 Alpha_Cursor_Image_Planes;
+	uint32 Client_Feature_Capability_Indicators;
+	uint8 Maximum_Video_Frame_Rate_Capability;
+	uint8 Minimum_Video_Frame_Rate_Capability;
+	uint16 Minimum_Sub_frame_Rate;
+	uint16 Audio_Buffer_Depth;
+	uint16 Audio_Channel_Capability;
+	uint16 Audio_Sample_Rate_Capability;
+	uint8 Audio_Sample_Resolution;
+	uint8 Mic_Audio_Sample_Resolution;
+	uint16 Mic_Sample_Rate_Capability;
+	uint8 Keyboard_Data_Format;
+	uint8 pointing_device_data_format;
+	uint16 content_protection_type;
+	uint16 Mfr_Name;
+	uint16 Product_Code;
+	uint16 Reserved_3;
+	uint32 Serial_Number;
+	uint8 Week_of_Manufacture;
+	uint8 Year_of_Manufacture;
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all the bytes in the packet including Packet Length. */
+
+} mddi_client_capability_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 16 identifies the packet as a Video Stream Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall be set to zero. */
+
+	uint16 video_data_format_descriptor;
+	/* format of each pixel in the Pixel Data in the present stream in the
+	 * present packet.
+	 * If bits [15:13] = 000 monochrome
+	 * If bits [15:13] = 001 color pixels (palette).
+	 * If bits [15:13] = 010 color pixels in raw RGB
+	 * If bits [15:13] = 011 data in 4:2:2 Y Cb Cr format
+	 * If bits [15:13] = 100 Bayer pixels
+	 */
+
+	uint16 pixel_data_attributes;
+	/* interpreted as follows:
+	 * Bits [1:0] = 11  pixel data is displayed to both eyes
+	 * Bits [1:0] = 10  pixel data is routed to the left eye only.
+	 * Bits [1:0] = 01  pixel data is routed to the right eye only.
+	 * Bits [1:0] = 00  pixel data is routed to the alternate display.
+	 * Bit 2 is 0  Pixel Data is in the standard progressive format.
+	 * Bit 2 is 1  Pixel Data is in interlace format.
+	 * Bit 3 is 0  Pixel Data is in the standard progressive format.
+	 * Bit 3 is 1  Pixel Data is in alternate pixel format.
+	 * Bit 4 is 0  Pixel Data is to or from the display frame buffer.
+	 * Bit 4 is 1  Pixel Data is to or from the camera.
+	 * Bit 5 is 0  pixel data contains the next consecutive row of pixels.
+	 * Bit 5 is 1  X Left Edge, Y Top Edge, X Right Edge, Y Bottom Edge,
+	 *             X Start, and Y Start parameters are not defined and
+	 *             shall be ignored by the client.
+	 * Bits [7:6] = 01  Pixel data is written to the offline image buffer.
+	 * Bits [7:6] = 00  Pixel data is written to the buffer to refresh display.
+	 * Bits [7:6] = 11  Pixel data is written to all image buffers.
+	 * Bits [7:6] = 10  Invalid. Reserved for future use.
+	 * Bits 8 through 11 alternate display number.
+	 * Bits 12 through 14 are reserved for future use and shall be set to zero.
+	 * Bit 15 is 1 the row of pixels is the last row of pixels in a frame.
+	 */
+
+	uint16 x_left_edge;
+	uint16 y_top_edge;
+	/* X,Y coordinate of the top left edge of the screen window */
+
+	uint16 x_right_edge;
+	uint16 y_bottom_edge;
+	/*  X,Y coordinate of the bottom right edge of the window being updated. */
+
+	uint16 x_start;
+	uint16 y_start;
+	/*  (X Start, Y Start) is the first pixel in the Pixel Data field below. */
+
+	uint16 pixel_count;
+	/*  number of pixels in the Pixel Data field below. */
+
+	uint16 parameter_CRC;
+	/*  16-bit CRC of all bytes from the Packet Length to the Pixel Count. */
+
+	uint16 reserved;
+	/* 16-bit variable to make structure align on 4 byte boundary */
+
+} mddi_video_stream_packet_type;
+
+typedef struct GCC_PACKED {
+	uint16 packet_length;
+	/* total # of bytes in the packet not including the packet_length field. */
+
+	uint16 packet_type;
+	/* A Packet Type of 146 identifies the packet as a Register Access Packet. */
+
+	uint16 bClient_ID;
+	/* This field is reserved for future use and shall be set to zero. */
+
+	uint16 read_write_info;
+	/* Bits 13:0  a 14-bit unsigned integer that specifies the number of
+	 *            32-bit Register Data List items to be transferred in the
+	 *            Register Data List field.
+	 * Bits[15:14] = 00  Write to register(s);
+	 * Bits[15:14] = 10  Read from register(s);
+	 * Bits[15:14] = 11  Response to a Read.
+	 * Bits[15:14] = 01  this value is reserved for future use. */
+
+	uint32 register_address;
+	/* the register address that is to be written to or read from. */
+
+	uint16 parameter_CRC;
+	/* 16-bit CRC of all bytes from the Packet Length to the Register Address. */
+
+	uint32 register_data_list;
+	/* list of 4-byte register data values for/from client registers */
+
+} mddi_register_access_packet_type;
+
+typedef union GCC_PACKED {
+	mddi_video_stream_packet_type video_pkt;
+	mddi_register_access_packet_type register_pkt;
+	/* add 48 byte pad to ensure 64 byte llist struct, that can be
+	 * manipulated easily with cache */
+	uint32 alignment_pad[12];	/* 48 bytes */
+} mddi_packet_header_type;
+
+typedef struct GCC_PACKED mddi_host_llist_struct {
+	uint16 link_controller_flags;
+	uint16 packet_header_count;
+	uint16 packet_data_count;
+	void *packet_data_pointer;
+	struct mddi_host_llist_struct *next_packet_pointer;
+	uint16 reserved;
+	mddi_packet_header_type packet_header;
+} mddi_linked_list_type;
+
+typedef struct {
+	struct completion done_comp;
+	mddi_llist_done_cb_type done_cb;
+	uint16 next_idx;
+	boolean waiting;
+	boolean in_use;
+} mddi_linked_list_notify_type;
+
+#define MDDI_LLIST_POOL_SIZE 0x1000
+#define MDDI_MAX_NUM_LLIST_ITEMS (MDDI_LLIST_POOL_SIZE / \
+		 sizeof(mddi_linked_list_type))
+#define UNASSIGNED_INDEX MDDI_MAX_NUM_LLIST_ITEMS
+#define MDDI_FIRST_DYNAMIC_LLIST_IDX 0
+
+/* Static llist items can be used for applications that frequently send
+ * the same set of packets using the linked list interface. */
+/* Here we configure for 6 static linked list items:
+ *  The 1st is used for a the adaptive backlight setting.
+ *  and the remaining 5 are used for sending window adjustments for
+ *  MDDI clients that need windowing info sent separate from video
+ *  packets. */
+#define MDDI_NUM_STATIC_ABL_ITEMS 1
+#define MDDI_NUM_STATIC_WINDOW_ITEMS 5
+#define MDDI_NUM_STATIC_LLIST_ITEMS (MDDI_NUM_STATIC_ABL_ITEMS + \
+				MDDI_NUM_STATIC_WINDOW_ITEMS)
+#define MDDI_NUM_DYNAMIC_LLIST_ITEMS (MDDI_MAX_NUM_LLIST_ITEMS - \
+				MDDI_NUM_STATIC_LLIST_ITEMS)
+
+#define MDDI_FIRST_STATIC_LLIST_IDX  MDDI_NUM_DYNAMIC_LLIST_ITEMS
+#define MDDI_FIRST_STATIC_ABL_IDX  MDDI_FIRST_STATIC_LLIST_IDX
+#define MDDI_FIRST_STATIC_WINDOW_IDX  (MDDI_FIRST_STATIC_LLIST_IDX + \
+				MDDI_NUM_STATIC_ABL_ITEMS)
+
+/* GPIO registers */
+#define VSYNC_WAKEUP_REG          0x80
+#define GPIO_REG                  0x81
+#define GPIO_OUTPUT_REG           0x82
+#define GPIO_INTERRUPT_REG        0x83
+#define GPIO_INTERRUPT_ENABLE_REG 0x84
+#define GPIO_POLARITY_REG         0x85
+
+/* Interrupt Bits */
+#define MDDI_INT_PRI_PTR_READ       0x0001
+#define MDDI_INT_SEC_PTR_READ       0x0002
+#define MDDI_INT_REV_DATA_AVAIL     0x0004
+#define MDDI_INT_DISP_REQ           0x0008
+#define MDDI_INT_PRI_UNDERFLOW      0x0010
+#define MDDI_INT_SEC_UNDERFLOW      0x0020
+#define MDDI_INT_REV_OVERFLOW       0x0040
+#define MDDI_INT_CRC_ERROR          0x0080
+#define MDDI_INT_MDDI_IN            0x0100
+#define MDDI_INT_PRI_OVERWRITE      0x0200
+#define MDDI_INT_SEC_OVERWRITE      0x0400
+#define MDDI_INT_REV_OVERWRITE      0x0800
+#define MDDI_INT_DMA_FAILURE        0x1000
+#define MDDI_INT_LINK_ACTIVE        0x2000
+#define MDDI_INT_IN_HIBERNATION     0x4000
+#define MDDI_INT_PRI_LINK_LIST_DONE 0x8000
+#define MDDI_INT_SEC_LINK_LIST_DONE 0x10000
+#define MDDI_INT_NO_CMD_PKTS_PEND   0x20000
+#define MDDI_INT_RTD_FAILURE        0x40000
+
+#define MDDI_INT_ERROR_CONDITIONS ( \
+	MDDI_INT_PRI_UNDERFLOW | MDDI_INT_SEC_UNDERFLOW | \
+	MDDI_INT_REV_OVERFLOW | MDDI_INT_CRC_ERROR | \
+	MDDI_INT_PRI_OVERWRITE | MDDI_INT_SEC_OVERWRITE | \
+	MDDI_INT_RTD_FAILURE | \
+	MDDI_INT_REV_OVERWRITE | MDDI_INT_DMA_FAILURE)
+
+#define MDDI_INT_LINK_STATE_CHANGES ( \
+	MDDI_INT_LINK_ACTIVE | MDDI_INT_IN_HIBERNATION)
+
+/* Status Bits */
+#define MDDI_STAT_LINK_ACTIVE        0x0001
+#define MDDI_STAT_NEW_REV_PTR        0x0002
+#define MDDI_STAT_NEW_PRI_PTR        0x0004
+#define MDDI_STAT_NEW_SEC_PTR        0x0008
+#define MDDI_STAT_IN_HIBERNATION     0x0010
+#define MDDI_STAT_PRI_LINK_LIST_DONE 0x0020
+#define MDDI_STAT_SEC_LINK_LIST_DONE 0x0040
+#define MDDI_STAT_PENDING_TIMING_PKT 0x0080
+#define MDDI_STAT_PENDING_REV_ENCAP  0x0100
+#define MDDI_STAT_PENDING_POWERDOWN  0x0200
+#define MDDI_STAT_RTD_MEAS_FAIL      0x0800
+#define MDDI_STAT_CLIENT_WAKEUP_REQ  0x1000
+
+/* Command Bits */
+#define MDDI_CMD_POWERDOWN           0x0100
+#define MDDI_CMD_POWERUP             0x0200
+#define MDDI_CMD_HIBERNATE           0x0300
+#define MDDI_CMD_RESET               0x0400
+#define MDDI_CMD_DISP_IGNORE         0x0501
+#define MDDI_CMD_DISP_LISTEN         0x0500
+#define MDDI_CMD_SEND_REV_ENCAP      0x0600
+#define MDDI_CMD_GET_CLIENT_CAP      0x0601
+#define MDDI_CMD_GET_CLIENT_STATUS   0x0602
+#define MDDI_CMD_SEND_RTD            0x0700
+#define MDDI_CMD_LINK_ACTIVE         0x0900
+#define MDDI_CMD_PERIODIC_REV_ENCAP  0x0A00
+
+extern void mddi_host_init(mddi_host_type host);
+extern void mddi_host_powerdown(mddi_host_type host);
+extern uint16 mddi_get_next_free_llist_item(mddi_host_type host, boolean wait);
+extern uint16 mddi_get_reg_read_llist_item(mddi_host_type host, boolean wait);
+extern void mddi_queue_forward_packets(uint16 first_llist_idx,
+				       uint16 last_llist_idx,
+				       boolean wait,
+				       mddi_llist_done_cb_type llist_done_cb,
+				       mddi_host_type host);
+
+extern void mddi_host_write_pix_attr_reg(uint32 value);
+extern void mddi_client_lcd_gpio_poll(uint32 poll_reg_val);
+extern void mddi_client_lcd_vsync_detected(boolean detected);
+extern void mddi_host_disable_hibernation(boolean disable);
+
+extern mddi_linked_list_type *llist_extern[];
+extern mddi_linked_list_type *llist_dma_extern[];
+extern mddi_linked_list_notify_type *llist_extern_notify[];
+extern struct timer_list mddi_host_timer;
+
+typedef struct {
+	uint16 transmitting_start_idx;
+	uint16 transmitting_end_idx;
+	uint16 waiting_start_idx;
+	uint16 waiting_end_idx;
+	uint16 reg_read_idx;
+	uint16 next_free_idx;
+	boolean reg_read_waiting;
+} mddi_llist_info_type;
+
+extern mddi_llist_info_type mddi_llist;
+
+#define MDDI_GPIO_DEFAULT_POLLING_INTERVAL 200
+typedef struct {
+	uint32 polling_reg;
+	uint32 polling_val;
+	uint32 polling_interval;
+	boolean polling_enabled;
+} mddi_gpio_info_type;
+
+uint32 mddi_get_client_id(void);
+void mddi_mhctl_remove(mddi_host_type host_idx);
+void mddi_host_timer_service(unsigned long data);
+#endif /* MDDIHOSTI_H */
diff --git a/drivers/staging/msm/mdp.c b/drivers/staging/msm/mdp.c
new file mode 100644
index 0000000..36053af
--- /dev/null
+++ b/drivers/staging/msm/mdp.c
@@ -0,0 +1,1113 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#ifdef CONFIG_FB_MSM_MDP40
+#include "mdp4.h"
+#endif
+
+static struct clk *mdp_clk;
+static struct clk *mdp_pclk;
+
+struct completion mdp_ppp_comp;
+struct semaphore mdp_ppp_mutex;
+struct semaphore mdp_pipe_ctrl_mutex;
+
+unsigned long mdp_timer_duration = (HZ);   /* 1 sec */
+/* unsigned long mdp_mdp_timer_duration=0; */
+
+boolean mdp_ppp_waiting = FALSE;
+uint32 mdp_tv_underflow_cnt;
+uint32 mdp_lcdc_underflow_cnt;
+
+boolean mdp_current_clk_on = FALSE;
+boolean mdp_is_in_isr = FALSE;
+
+/*
+ * legacy mdp_in_processing is only for DMA2-MDDI
+ * this applies to DMA2 block only
+ */
+uint32 mdp_in_processing = FALSE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+uint32 mdp_intr_mask = MDP4_ANY_INTR_MASK;
+#else
+uint32 mdp_intr_mask = MDP_ANY_INTR_MASK;
+#endif
+
+MDP_BLOCK_TYPE mdp_debug[MDP_MAX_BLOCK];
+
+int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+
+spinlock_t mdp_spin_lock;
+struct workqueue_struct *mdp_dma_wq;	/*mdp dma wq */
+struct workqueue_struct *mdp_vsync_wq;	/*mdp vsync wq */
+
+static struct workqueue_struct *mdp_pipe_ctrl_wq; /* mdp mdp pipe ctrl wq */
+static struct delayed_work mdp_pipe_ctrl_worker;
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_dma_data dma2_data;
+struct mdp_dma_data dma_s_data;
+struct mdp_dma_data dma_e_data;
+#else
+static struct mdp_dma_data dma2_data;
+static struct mdp_dma_data dma_s_data;
+static struct mdp_dma_data dma_e_data;
+#endif
+static struct mdp_dma_data dma3_data;
+
+extern ktime_t mdp_dma2_last_update_time;
+
+extern uint32 mdp_dma2_update_time_in_usec;
+extern int mdp_lcd_rd_cnt_offset_slow;
+extern int mdp_lcd_rd_cnt_offset_fast;
+extern int mdp_usec_diff_threshold;
+
+#ifdef CONFIG_FB_MSM_LCDC
+extern int mdp_lcdc_pclk_clk_rate;
+extern int mdp_lcdc_pad_pclk_clk_rate;
+extern int first_pixel_start_x;
+extern int first_pixel_start_y;
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+struct dentry *mdp_dir;
+#endif
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state);
+#else
+#define mdp_suspend NULL
+#endif
+
+struct timeval mdp_dma2_timeval;
+struct timeval mdp_ppp_timeval;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static struct early_suspend early_suspend;
+#endif
+
+#ifndef CONFIG_FB_MSM_MDP22
+DEFINE_MUTEX(mdp_lut_push_sem);
+static int mdp_lut_i;
+static int mdp_lut_hw_update(struct fb_cmap *cmap)
+{
+	int i;
+	u16 *c[3];
+	u16 r, g, b;
+
+	c[0] = cmap->green;
+	c[1] = cmap->blue;
+	c[2] = cmap->red;
+
+	for (i = 0; i < cmap->len; i++) {
+		if (copy_from_user(&r, cmap->red++, sizeof(r)) ||
+		    copy_from_user(&g, cmap->green++, sizeof(g)) ||
+		    copy_from_user(&b, cmap->blue++, sizeof(b)))
+			return -EFAULT;
+
+#ifdef CONFIG_FB_MSM_MDP40
+		MDP_OUTP(MDP_BASE + 0x94800 +
+#else
+		MDP_OUTP(MDP_BASE + 0x93800 +
+#endif
+			(0x400*mdp_lut_i) + cmap->start*4 + i*4,
+				((g & 0xff) |
+				 ((b & 0xff) << 8) |
+				 ((r & 0xff) << 16)));
+	}
+
+	return 0;
+}
+
+static int mdp_lut_push;
+static int mdp_lut_push_i;
+static int mdp_lut_update_nonlcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+	int ret;
+
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	ret = mdp_lut_hw_update(cmap);
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	if (ret)
+		return ret;
+
+	mutex_lock(&mdp_lut_push_sem);
+	mdp_lut_push = 1;
+	mdp_lut_push_i = mdp_lut_i;
+	mutex_unlock(&mdp_lut_push_sem);
+
+	mdp_lut_i = (mdp_lut_i + 1)%2;
+
+	return 0;
+}
+
+static int mdp_lut_update_lcdc(struct fb_info *info, struct fb_cmap *cmap)
+{
+	int ret;
+
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	ret = mdp_lut_hw_update(cmap);
+
+	if (ret) {
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+		return ret;
+	}
+
+	MDP_OUTP(MDP_BASE + 0x90070, (mdp_lut_i << 10) | 0x17);
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_lut_i = (mdp_lut_i + 1)%2;
+
+	return 0;
+}
+
+#define MDP_HIST_MAX_BIN 32
+static __u32 mdp_hist_r[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_g[MDP_HIST_MAX_BIN];
+static __u32 mdp_hist_b[MDP_HIST_MAX_BIN];
+
+#ifdef CONFIG_FB_MSM_MDP40
+struct mdp_histogram mdp_hist;
+struct completion mdp_hist_comp;
+#else
+static struct mdp_histogram mdp_hist;
+static struct completion mdp_hist_comp;
+#endif
+
+static int mdp_do_histogram(struct fb_info *info, struct mdp_histogram *hist)
+{
+	int ret = 0;
+
+	if (!hist->frame_cnt || (hist->bin_cnt == 0) ||
+				 (hist->bin_cnt > MDP_HIST_MAX_BIN))
+		return -EINVAL;
+
+	INIT_COMPLETION(mdp_hist_comp);
+
+	mdp_hist.bin_cnt = hist->bin_cnt;
+	mdp_hist.r = (hist->r) ? mdp_hist_r : 0;
+	mdp_hist.g = (hist->g) ? mdp_hist_g : 0;
+	mdp_hist.b = (hist->b) ? mdp_hist_b : 0;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	MDP_OUTP(MDP_BASE + 0x95004, hist->frame_cnt);
+	MDP_OUTP(MDP_BASE + 0x95000, 1);
+#else
+	MDP_OUTP(MDP_BASE + 0x94004, hist->frame_cnt);
+	MDP_OUTP(MDP_BASE + 0x94000, 1);
+#endif
+	wait_for_completion_killable(&mdp_hist_comp);
+
+	if (hist->r) {
+		ret = copy_to_user(hist->r, mdp_hist.r, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	if (hist->g) {
+		ret = copy_to_user(hist->g, mdp_hist.g, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	if (hist->b) {
+		ret = copy_to_user(hist->b, mdp_hist.b, hist->bin_cnt*4);
+		if (ret)
+			goto hist_err;
+	}
+	return 0;
+
+hist_err:
+	printk(KERN_ERR "%s: invalid hist buffer\n", __func__);
+	return ret;
+}
+#endif
+
+/* Returns < 0 on error, 0 on timeout, or > 0 on successful wait */
+
+int mdp_ppp_pipe_wait(void)
+{
+	int ret = 1;
+
+	/* wait 5 seconds for the operation to complete before declaring
+	the MDP hung */
+
+	if (mdp_ppp_waiting == TRUE) {
+		ret = wait_for_completion_interruptible_timeout(&mdp_ppp_comp,
+								5 * HZ);
+
+		if (!ret)
+			printk(KERN_ERR "%s: Timed out waiting for the MDP.\n",
+					__func__);
+	}
+
+	return ret;
+}
+
+static DEFINE_SPINLOCK(mdp_lock);
+static int mdp_irq_mask;
+static int mdp_irq_enabled;
+
+void mdp_enable_irq(uint32 term)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&mdp_lock, irq_flags);
+	if (mdp_irq_mask & term) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is already set\n", term);
+	} else {
+		mdp_irq_mask |= term;
+		if (mdp_irq_mask && !mdp_irq_enabled) {
+			mdp_irq_enabled = 1;
+			enable_irq(INT_MDP);
+		}
+	}
+	spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq(uint32 term)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&mdp_lock, irq_flags);
+	if (!(mdp_irq_mask & term)) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+	} else {
+		mdp_irq_mask &= ~term;
+		if (!mdp_irq_mask && mdp_irq_enabled) {
+			mdp_irq_enabled = 0;
+			disable_irq(INT_MDP);
+		}
+	}
+	spin_unlock_irqrestore(&mdp_lock, irq_flags);
+}
+
+void mdp_disable_irq_nolock(uint32 term)
+{
+
+	if (!(mdp_irq_mask & term)) {
+		printk(KERN_ERR "MDP IRQ term-0x%x is not set\n", term);
+	} else {
+		mdp_irq_mask &= ~term;
+		if (!mdp_irq_mask && mdp_irq_enabled) {
+			mdp_irq_enabled = 0;
+			disable_irq(INT_MDP);
+		}
+	}
+}
+
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd)
+{
+
+	dmb();	/* memory barrier */
+
+	/* kick off PPP engine */
+	if (term == MDP_PPP_TERM) {
+		if (mdp_debug[MDP_PPP_BLOCK])
+			jiffies_to_timeval(jiffies, &mdp_ppp_timeval);
+
+		/* let's turn on PPP block */
+		mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		mdp_enable_irq(term);
+		INIT_COMPLETION(mdp_ppp_comp);
+		mdp_ppp_waiting = TRUE;
+		outpdw(MDP_BASE + 0x30, 0x1000);
+		wait_for_completion_killable(&mdp_ppp_comp);
+		mdp_disable_irq(term);
+
+		if (mdp_debug[MDP_PPP_BLOCK]) {
+			struct timeval now;
+
+			jiffies_to_timeval(jiffies, &now);
+			mdp_ppp_timeval.tv_usec =
+			    now.tv_usec - mdp_ppp_timeval.tv_usec;
+			MSM_FB_INFO("MDP-PPP: %d\n",
+				    (int)mdp_ppp_timeval.tv_usec);
+		}
+	} else if (term == MDP_DMA2_TERM) {
+		if (mdp_debug[MDP_DMA2_BLOCK]) {
+			MSM_FB_INFO("MDP-DMA2: %d\n",
+				    (int)mdp_dma2_timeval.tv_usec);
+			jiffies_to_timeval(jiffies, &mdp_dma2_timeval);
+		}
+		/* DMA update timestamp */
+		mdp_dma2_last_update_time = ktime_get_real();
+		/* let's turn on DMA2 block */
+#if 0
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+#endif
+#ifdef CONFIG_FB_MSM_MDP22
+		outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x0044, 0x0);/* start DMA */
+#else
+		if (mdp_lut_push) {
+			mutex_lock(&mdp_lut_push_sem);
+			mdp_lut_push = 0;
+			MDP_OUTP(MDP_BASE + 0x90070,
+					(mdp_lut_push_i << 10) | 0x17);
+			mutex_unlock(&mdp_lut_push_sem);
+		}
+#ifdef CONFIG_FB_MSM_MDP40
+		outpdw(MDP_BASE + 0x000c, 0x0);	/* start DMA */
+#else
+		outpdw(MDP_BASE + 0x0044, 0x0);	/* start DMA */
+#endif
+#endif
+#ifdef CONFIG_FB_MSM_MDP40
+	} else if (term == MDP_DMA_S_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0010, 0x0);	/* start DMA */
+	} else if (term == MDP_DMA_E_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_E_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0014, 0x0);	/* start DMA */
+	} else if (term == MDP_OVERLAY0_TERM) {
+		mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0004, 0);
+	} else if (term == MDP_OVERLAY1_TERM) {
+		mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0008, 0);
+	}
+#else
+	} else if (term == MDP_DMA_S_TERM) {
+		mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+		outpdw(MDP_BASE + 0x0048, 0x0);	/* start DMA */
+	}
+#endif
+}
+
+static void mdp_pipe_ctrl_workqueue_handler(struct work_struct *work)
+{
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr)
+{
+	boolean mdp_all_blocks_off = TRUE;
+	int i;
+	unsigned long flag;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	if (MDP_BLOCK_POWER_ON == state) {
+		mdp_block_power_cnt[block]++;
+
+		if (MDP_DMA2_BLOCK == block)
+			mdp_in_processing = TRUE;
+	} else {
+		mdp_block_power_cnt[block]--;
+
+		if (mdp_block_power_cnt[block] < 0) {
+			/*
+			* Master has to serve a request to power off MDP always
+			* It also has a timer to power off.  So, in case of
+			* timer expires first and DMA2 finishes later,
+			* master has to power off two times
+			* There shouldn't be multiple power-off request for
+			* other blocks
+			*/
+			if (block != MDP_MASTER_BLOCK) {
+				MSM_FB_INFO("mdp_block_power_cnt[block=%d] \
+				multiple power-off request\n", block);
+			}
+			mdp_block_power_cnt[block] = 0;
+		}
+
+		if (MDP_DMA2_BLOCK == block)
+			mdp_in_processing = FALSE;
+	}
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	/*
+	 * If it's in isr, we send our request to workqueue.
+	 * Otherwise, processing happens in the current context
+	 */
+	if (isr) {
+		/* checking all blocks power state */
+		for (i = 0; i < MDP_MAX_BLOCK; i++) {
+			if (mdp_block_power_cnt[i] > 0)
+				mdp_all_blocks_off = FALSE;
+		}
+
+		if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+			/* send workqueue to turn off mdp power */
+			queue_delayed_work(mdp_pipe_ctrl_wq,
+					   &mdp_pipe_ctrl_worker,
+					   mdp_timer_duration);
+		}
+	} else {
+		down(&mdp_pipe_ctrl_mutex);
+		/* checking all blocks power state */
+		for (i = 0; i < MDP_MAX_BLOCK; i++) {
+			if (mdp_block_power_cnt[i] > 0)
+				mdp_all_blocks_off = FALSE;
+		}
+
+		/*
+		 * find out whether a delayable work item is currently
+		 * pending
+		 */
+
+		if (delayed_work_pending(&mdp_pipe_ctrl_worker)) {
+			/*
+			 * try to cancel the current work if it fails to
+			 * stop (which means del_timer can't delete it
+			 * from the list, it's about to expire and run),
+			 * we have to let it run. queue_delayed_work won't
+			 * accept the next job which is same as
+			 * queue_delayed_work(mdp_timer_duration = 0)
+			 */
+			cancel_delayed_work(&mdp_pipe_ctrl_worker);
+		}
+
+		if ((mdp_all_blocks_off) && (mdp_current_clk_on)) {
+			if (block == MDP_MASTER_BLOCK) {
+				mdp_current_clk_on = FALSE;
+				/* turn off MDP clks */
+				if (mdp_clk != NULL) {
+					clk_disable(mdp_clk);
+					MSM_FB_DEBUG("MDP CLK OFF\n");
+				}
+				if (mdp_pclk != NULL) {
+					clk_disable(mdp_pclk);
+					MSM_FB_DEBUG("MDP PCLK OFF\n");
+				}
+			} else {
+				/* send workqueue to turn off mdp power */
+				queue_delayed_work(mdp_pipe_ctrl_wq,
+						   &mdp_pipe_ctrl_worker,
+						   mdp_timer_duration);
+			}
+		} else if ((!mdp_all_blocks_off) && (!mdp_current_clk_on)) {
+			mdp_current_clk_on = TRUE;
+			/* turn on MDP clks */
+			if (mdp_clk != NULL) {
+				clk_enable(mdp_clk);
+				MSM_FB_DEBUG("MDP CLK ON\n");
+			}
+			if (mdp_pclk != NULL) {
+				clk_enable(mdp_pclk);
+				MSM_FB_DEBUG("MDP PCLK ON\n");
+			}
+		}
+		up(&mdp_pipe_ctrl_mutex);
+	}
+}
+
+#ifndef CONFIG_FB_MSM_MDP40
+irqreturn_t mdp_isr(int irq, void *ptr)
+{
+	uint32 mdp_interrupt = 0;
+	struct mdp_dma_data *dma;
+
+	mdp_is_in_isr = TRUE;
+	do {
+		mdp_interrupt = inp32(MDP_INTR_STATUS);
+		outp32(MDP_INTR_CLEAR, mdp_interrupt);
+
+		mdp_interrupt &= mdp_intr_mask;
+
+		if (mdp_interrupt & TV_ENC_UNDERRUN) {
+			mdp_interrupt &= ~(TV_ENC_UNDERRUN);
+			mdp_tv_underflow_cnt++;
+		}
+
+		if (!mdp_interrupt)
+			break;
+
+		/* DMA3 TV-Out Start */
+		if (mdp_interrupt & TV_OUT_DMA3_START) {
+			/* let's disable TV out interrupt */
+			mdp_intr_mask &= ~TV_OUT_DMA3_START;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+			dma = &dma3_data;
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+#ifndef CONFIG_FB_MSM_MDP22
+		if (mdp_interrupt & MDP_HIST_DONE) {
+			outp32(MDP_BASE + 0x94018, 0x3);
+			outp32(MDP_INTR_CLEAR, MDP_HIST_DONE);
+			if (mdp_hist.r)
+				memcpy(mdp_hist.r, MDP_BASE + 0x94100,
+						mdp_hist.bin_cnt*4);
+			if (mdp_hist.g)
+				memcpy(mdp_hist.g, MDP_BASE + 0x94200,
+						mdp_hist.bin_cnt*4);
+			if (mdp_hist.b)
+				memcpy(mdp_hist.b, MDP_BASE + 0x94300,
+						mdp_hist.bin_cnt*4);
+			complete(&mdp_hist_comp);
+		}
+
+		/* LCDC UnderFlow */
+		if (mdp_interrupt & LCDC_UNDERFLOW) {
+			mdp_lcdc_underflow_cnt++;
+		}
+		/* LCDC Frame Start */
+		if (mdp_interrupt & LCDC_FRAME_START) {
+			/* let's disable LCDC interrupt */
+			mdp_intr_mask &= ~LCDC_FRAME_START;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+
+			dma = &dma2_data;
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+
+		/* DMA2 LCD-Out Complete */
+		if (mdp_interrupt & MDP_DMA_S_DONE) {
+			dma = &dma_s_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA_S_BLOCK, MDP_BLOCK_POWER_OFF,
+				      TRUE);
+			complete(&dma->comp);
+		}
+#endif
+
+		/* DMA2 LCD-Out Complete */
+		if (mdp_interrupt & MDP_DMA_P_DONE) {
+			struct timeval now;
+			ktime_t now_k;
+
+			now_k = ktime_get_real();
+			mdp_dma2_last_update_time.tv.sec =
+			    now_k.tv.sec - mdp_dma2_last_update_time.tv.sec;
+			mdp_dma2_last_update_time.tv.nsec =
+			    now_k.tv.nsec - mdp_dma2_last_update_time.tv.nsec;
+
+			if (mdp_debug[MDP_DMA2_BLOCK]) {
+				jiffies_to_timeval(jiffies, &now);
+				mdp_dma2_timeval.tv_usec =
+				    now.tv_usec - mdp_dma2_timeval.tv_usec;
+			}
+
+			dma = &dma2_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF,
+				      TRUE);
+			complete(&dma->comp);
+		}
+		/* PPP Complete */
+		if (mdp_interrupt & MDP_PPP_DONE) {
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+			mdp_ppp_djob_done();
+#else
+			mdp_pipe_ctrl(MDP_PPP_BLOCK,
+				MDP_BLOCK_POWER_OFF, TRUE);
+			if (mdp_ppp_waiting) {
+				mdp_ppp_waiting = FALSE;
+				complete(&mdp_ppp_comp);
+			}
+#endif
+		}
+	} while (1);
+
+	mdp_is_in_isr = FALSE;
+
+	return IRQ_HANDLED;
+}
+#endif
+
+static void mdp_drv_init(void)
+{
+	int i;
+
+	for (i = 0; i < MDP_MAX_BLOCK; i++) {
+		mdp_debug[i] = 0;
+	}
+
+	/* initialize spin lock and workqueue */
+	spin_lock_init(&mdp_spin_lock);
+	mdp_dma_wq = create_singlethread_workqueue("mdp_dma_wq");
+	mdp_vsync_wq = create_singlethread_workqueue("mdp_vsync_wq");
+	mdp_pipe_ctrl_wq = create_singlethread_workqueue("mdp_pipe_ctrl_wq");
+	INIT_DELAYED_WORK(&mdp_pipe_ctrl_worker,
+			  mdp_pipe_ctrl_workqueue_handler);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	mdp_ppp_dq_init();
+#endif
+
+	/* initialize semaphore */
+	init_completion(&mdp_ppp_comp);
+	init_MUTEX(&mdp_ppp_mutex);
+	init_MUTEX(&mdp_pipe_ctrl_mutex);
+
+	dma2_data.busy = FALSE;
+	dma2_data.waiting = FALSE;
+	init_completion(&dma2_data.comp);
+	init_MUTEX(&dma2_data.mutex);
+	mutex_init(&dma2_data.ov_mutex);
+
+	dma3_data.busy = FALSE;
+	dma3_data.waiting = FALSE;
+	init_completion(&dma3_data.comp);
+	init_MUTEX(&dma3_data.mutex);
+
+	dma_s_data.busy = FALSE;
+	dma_s_data.waiting = FALSE;
+	init_completion(&dma_s_data.comp);
+	init_MUTEX(&dma_s_data.mutex);
+
+	dma_e_data.busy = FALSE;
+	dma_e_data.waiting = FALSE;
+	init_completion(&dma_e_data.comp);
+
+#ifndef CONFIG_FB_MSM_MDP22
+	init_completion(&mdp_hist_comp);
+#endif
+
+	/* initializing mdp power block counter to 0 */
+	for (i = 0; i < MDP_MAX_BLOCK; i++) {
+		mdp_block_power_cnt[i] = 0;
+	}
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+		char sub_name[] = "mdp";
+
+		root = msm_fb_get_debugfs_root();
+		if (root != NULL) {
+			mdp_dir = debugfs_create_dir(sub_name, root);
+
+			if (mdp_dir) {
+				msm_fb_debugfs_file_create(mdp_dir,
+					"dma2_update_time_in_usec",
+					(u32 *) &mdp_dma2_update_time_in_usec);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"vs_rdcnt_slow",
+					(u32 *) &mdp_lcd_rd_cnt_offset_slow);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"vs_rdcnt_fast",
+					(u32 *) &mdp_lcd_rd_cnt_offset_fast);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_usec_diff_threshold",
+					(u32 *) &mdp_usec_diff_threshold);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_current_clk_on",
+					(u32 *) &mdp_current_clk_on);
+#ifdef CONFIG_FB_MSM_LCDC
+				msm_fb_debugfs_file_create(mdp_dir,
+					"lcdc_start_x",
+					(u32 *) &first_pixel_start_x);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"lcdc_start_y",
+					(u32 *) &first_pixel_start_y);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_lcdc_pclk_clk_rate",
+					(u32 *) &mdp_lcdc_pclk_clk_rate);
+				msm_fb_debugfs_file_create(mdp_dir,
+					"mdp_lcdc_pad_pclk_clk_rate",
+					(u32 *) &mdp_lcdc_pad_pclk_clk_rate);
+#endif
+			}
+		}
+	}
+#endif
+}
+
+static int mdp_probe(struct platform_device *pdev);
+static int mdp_remove(struct platform_device *pdev);
+
+static struct platform_driver mdp_driver = {
+	.probe = mdp_probe,
+	.remove = mdp_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+	.suspend = mdp_suspend,
+	.resume = NULL,
+#endif
+	.shutdown = NULL,
+	.driver = {
+		/*
+		 * Driver name must match the device name added in
+		 * platform.c.
+		 */
+		.name = "mdp",
+	},
+};
+
+static int mdp_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+	struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+	ret = panel_next_off(pdev);
+
+#ifdef MDP_HW_VSYNC
+	mdp_hw_vsync_clk_disable(mfd);
+#endif
+
+	return ret;
+}
+
+static int mdp_on(struct platform_device *pdev)
+{
+#ifdef MDP_HW_VSYNC
+	struct msm_fb_data_type *mfd = platform_get_drvdata(pdev);
+#endif
+
+	int ret = 0;
+
+#ifdef MDP_HW_VSYNC
+	mdp_hw_vsync_clk_enable(mfd);
+#endif
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+static int mdp_irq_clk_setup(void)
+{
+	int ret;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	ret = request_irq(INT_MDP, mdp4_isr, IRQF_DISABLED, "MDP", 0);
+#else
+	ret = request_irq(INT_MDP, mdp_isr, IRQF_DISABLED, "MDP", 0);
+#endif
+	if (ret) {
+		printk(KERN_ERR "mdp request_irq() failed!\n");
+		return ret;
+	}
+	disable_irq(INT_MDP);
+
+	mdp_clk = clk_get(NULL, "mdp_clk");
+
+	if (IS_ERR(mdp_clk)) {
+		ret = PTR_ERR(mdp_clk);
+		printk(KERN_ERR "can't get mdp_clk error:%d!\n", ret);
+		free_irq(INT_MDP, 0);
+		return ret;
+	}
+
+	mdp_pclk = clk_get(NULL, "mdp_pclk");
+	if (IS_ERR(mdp_pclk))
+		mdp_pclk = NULL;
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	/*
+	 * mdp_clk should greater than mdp_pclk always
+	 */
+	clk_set_rate(mdp_clk, 122880000); /* 122.88 Mhz */
+	printk(KERN_INFO "mdp_clk: mdp_clk=%d mdp_pclk=%d\n",
+		(int)clk_get_rate(mdp_clk), (int)clk_get_rate(mdp_pclk));
+#endif
+
+	return 0;
+}
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+static int mdp_resource_initialized;
+static struct msm_panel_common_pdata *mdp_pdata;
+
+static int mdp_probe(struct platform_device *pdev)
+{
+	struct platform_device *msm_fb_dev = NULL;
+	struct msm_fb_data_type *mfd;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+	resource_size_t  size ;
+#ifdef CONFIG_FB_MSM_MDP40
+	int intf, if_no;
+#else
+	unsigned long flag;
+#endif
+
+	if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+		mdp_pdata = pdev->dev.platform_data;
+
+		size =  resource_size(&pdev->resource[0]);
+		msm_mdp_base = ioremap(pdev->resource[0].start, size);
+
+		MSM_FB_INFO("MDP HW Base phy_Address = 0x%x virt = 0x%x\n",
+			(int)pdev->resource[0].start, (int)msm_mdp_base);
+
+		if (unlikely(!msm_mdp_base))
+			return -ENOMEM;
+
+		printk("irq clk setup\n");
+		rc = mdp_irq_clk_setup();
+		printk("irq clk setup done\n");
+		if (rc)
+			return rc;
+
+		/* initializing mdp hw */
+#ifdef CONFIG_FB_MSM_MDP40
+		mdp4_hw_init();
+#else
+		mdp_hw_init();
+#endif
+
+		mdp_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!mdp_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	msm_fb_dev = platform_device_alloc("msm_fb", pdev->id);
+	if (!msm_fb_dev)
+		return -ENOMEM;
+
+	/* link to the latest pdev */
+	mfd->pdev = msm_fb_dev;
+
+	/* add panel data */
+	if (platform_device_add_data
+	    (msm_fb_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "mdp_probe: platform_device_add_data failed!\n");
+		rc = -ENOMEM;
+		goto mdp_probe_err;
+	}
+	/* data chain */
+	pdata = msm_fb_dev->dev.platform_data;
+	pdata->on = mdp_on;
+	pdata->off = mdp_off;
+	pdata->next = pdev;
+
+	switch (mfd->panel.type) {
+	case EXT_MDDI_PANEL:
+	case MDDI_PANEL:
+	case EBI2_PANEL:
+		INIT_WORK(&mfd->dma_update_worker,
+			  mdp_lcd_update_workqueue_handler);
+		INIT_WORK(&mfd->vsync_resync_worker,
+			  mdp_vsync_resync_workqueue_handler);
+		mfd->hw_refresh = FALSE;
+
+		if (mfd->panel.type == EXT_MDDI_PANEL) {
+			/* 15 fps -> 66 msec */
+			mfd->refresh_timer_duration = (66 * HZ / 1000);
+		} else {
+			/* 24 fps -> 42 msec */
+			mfd->refresh_timer_duration = (42 * HZ / 1000);
+		}
+
+#ifdef CONFIG_FB_MSM_MDP22
+		mfd->dma_fnc = mdp_dma2_update;
+		mfd->dma = &dma2_data;
+#else
+		if (mfd->panel_info.pdest == DISPLAY_1) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+			mfd->dma_fnc = mdp4_mddi_overlay;
+#else
+			mfd->dma_fnc = mdp_dma2_update;
+#endif
+			mfd->dma = &dma2_data;
+			mfd->lut_update = mdp_lut_update_nonlcdc;
+			mfd->do_histogram = mdp_do_histogram;
+		} else {
+			mfd->dma_fnc = mdp_dma_s_update;
+			mfd->dma = &dma_s_data;
+		}
+#endif
+		if (mdp_pdata)
+			mfd->vsync_gpio = mdp_pdata->gpio;
+		else
+			mfd->vsync_gpio = -1;
+
+#ifdef CONFIG_FB_MSM_MDP40
+		if (mfd->panel.type == EBI2_PANEL)
+			intf = EBI2_INTF;
+		else
+			intf = MDDI_INTF;
+
+		if (mfd->panel_info.pdest == DISPLAY_1)
+			if_no = PRIMARY_INTF_SEL;
+		else
+			if_no = SECONDARY_INTF_SEL;
+
+		mdp4_display_intf_sel(if_no, intf);
+#endif
+		mdp_config_vsync(mfd);
+		break;
+
+	case HDMI_PANEL:
+	case LCDC_PANEL:
+		pdata->on = mdp_lcdc_on;
+		pdata->off = mdp_lcdc_off;
+		mfd->hw_refresh = TRUE;
+		mfd->cursor_update = mdp_hw_cursor_update;
+#ifndef CONFIG_FB_MSM_MDP22
+		mfd->lut_update = mdp_lut_update_lcdc;
+		mfd->do_histogram = mdp_do_histogram;
+#endif
+#ifdef CONFIG_FB_MSM_OVERLAY
+		mfd->dma_fnc = mdp4_lcdc_overlay;
+#else
+		mfd->dma_fnc = mdp_lcdc_update;
+#endif
+
+#ifdef CONFIG_FB_MSM_MDP40
+		if (mfd->panel.type == HDMI_PANEL) {
+			mfd->dma = &dma_e_data;
+			mdp4_display_intf_sel(EXTERNAL_INTF_SEL, LCDC_RGB_INTF);
+		} else {
+			mfd->dma = &dma2_data;
+			mdp4_display_intf_sel(PRIMARY_INTF_SEL, LCDC_RGB_INTF);
+		}
+#else
+		mfd->dma = &dma2_data;
+		spin_lock_irqsave(&mdp_spin_lock, flag);
+		mdp_intr_mask &= ~MDP_DMA_P_DONE;
+		outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+		spin_unlock_irqrestore(&mdp_spin_lock, flag);
+#endif
+		break;
+
+	case TV_PANEL:
+		pdata->on = mdp_dma3_on;
+		pdata->off = mdp_dma3_off;
+		mfd->hw_refresh = TRUE;
+		mfd->dma_fnc = mdp_dma3_update;
+		mfd->dma = &dma3_data;
+		break;
+
+	default:
+		printk(KERN_ERR "mdp_probe: unknown device type!\n");
+		rc = -ENODEV;
+		goto mdp_probe_err;
+	}
+
+	/* set driver data */
+	platform_set_drvdata(msm_fb_dev, mfd);
+
+	rc = platform_device_add(msm_fb_dev);
+	if (rc) {
+		goto mdp_probe_err;
+	}
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+      mdp_probe_err:
+	platform_device_put(msm_fb_dev);
+	return rc;
+}
+
+static void mdp_suspend_sub(void)
+{
+	/* cancel pipe ctrl worker */
+	cancel_delayed_work(&mdp_pipe_ctrl_worker);
+
+	/* for workder can't be cancelled... */
+	flush_workqueue(mdp_pipe_ctrl_wq);
+
+	/* let's wait for PPP completion */
+	while (mdp_block_power_cnt[MDP_PPP_BLOCK] > 0) ;
+
+	/* try to power down */
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int mdp_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	mdp_suspend_sub();
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void mdp_early_suspend(struct early_suspend *h)
+{
+	mdp_suspend_sub();
+}
+#endif
+
+static int mdp_remove(struct platform_device *pdev)
+{
+	iounmap(msm_mdp_base);
+	return 0;
+}
+
+static int mdp_register_driver(void)
+{
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 1;
+	early_suspend.suspend = mdp_early_suspend;
+	register_early_suspend(&early_suspend);
+#endif
+
+	return platform_driver_register(&mdp_driver);
+}
+
+static int __init mdp_driver_init(void)
+{
+	int ret;
+
+	mdp_drv_init();
+
+	ret = mdp_register_driver();
+	if (ret) {
+		printk(KERN_ERR "mdp_register_driver() failed!\n");
+		return ret;
+	}
+
+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_FB_MSM_MDP40)
+	mdp4_debugfs_init();
+#endif
+
+	return 0;
+
+}
+
+module_init(mdp_driver_init);
diff --git a/drivers/staging/msm/mdp.h b/drivers/staging/msm/mdp.h
new file mode 100644
index 0000000..0a5d6ac
--- /dev/null
+++ b/drivers/staging/msm/mdp.h
@@ -0,0 +1,695 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_H
+#define MDP_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/hrtimer.h>
+#include "msm_mdp.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#include "mdp_ppp_dq.h"
+#endif
+
+#ifdef BIT
+#undef BIT
+#endif
+
+#define BIT(x)  (1<<(x))
+
+#define MDPOP_NOP               0
+#define MDPOP_LR                BIT(0)	/* left to right flip */
+#define MDPOP_UD                BIT(1)	/* up and down flip */
+#define MDPOP_ROT90             BIT(2)	/* rotate image to 90 degree */
+#define MDPOP_ROT180            (MDPOP_UD|MDPOP_LR)
+#define MDPOP_ROT270            (MDPOP_ROT90|MDPOP_UD|MDPOP_LR)
+#define MDPOP_ASCALE            BIT(7)
+#define MDPOP_ALPHAB            BIT(8)	/* enable alpha blending */
+#define MDPOP_TRANSP            BIT(9)	/* enable transparency */
+#define MDPOP_DITHER            BIT(10)	/* enable dither */
+#define MDPOP_SHARPENING	BIT(11) /* enable sharpening */
+#define MDPOP_BLUR		BIT(12) /* enable blur */
+#define MDPOP_FG_PM_ALPHA       BIT(13)
+
+struct mdp_table_entry {
+	uint32_t reg;
+	uint32_t val;
+};
+
+extern struct mdp_ccs mdp_ccs_yuv2rgb ;
+extern struct mdp_ccs mdp_ccs_rgb2yuv ;
+
+/*
+ * MDP Image Structure
+ */
+typedef struct mdpImg_ {
+	uint32 imgType;		/* Image type */
+	uint32 *bmy_addr;	/* bitmap or y addr */
+	uint32 *cbcr_addr;	/* cbcr addr */
+	uint32 width;		/* image width */
+	uint32 mdpOp;		/* image opertion (rotation,flip up/down, alpha/tp) */
+	uint32 tpVal;		/* transparency color */
+	uint32 alpha;		/* alpha percentage 0%(0x0) ~ 100%(0x100) */
+	int    sp_value;        /* sharpening strength */
+} MDPIMG;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+#define MDP_OUTP(addr, data)	mdp_ppp_outdw((uint32_t)(addr),	\
+					 (uint32_t)(data))
+#else
+#define MDP_OUTP(addr, data) outpdw((addr), (data))
+#endif
+
+#define MDP_KTIME2USEC(kt) (kt.tv.sec*1000000 + kt.tv.nsec/1000)
+
+#define MDP_BASE msm_mdp_base
+
+typedef enum {
+	MDP_BC_SCALE_POINT2_POINT4,
+	MDP_BC_SCALE_POINT4_POINT6,
+	MDP_BC_SCALE_POINT6_POINT8,
+	MDP_BC_SCALE_POINT8_1,
+	MDP_BC_SCALE_UP,
+	MDP_PR_SCALE_POINT2_POINT4,
+	MDP_PR_SCALE_POINT4_POINT6,
+	MDP_PR_SCALE_POINT6_POINT8,
+	MDP_PR_SCALE_POINT8_1,
+	MDP_PR_SCALE_UP,
+	MDP_SCALE_BLUR,
+	MDP_INIT_SCALE
+} MDP_SCALE_MODE;
+
+typedef enum {
+	MDP_BLOCK_POWER_OFF,
+	MDP_BLOCK_POWER_ON
+} MDP_BLOCK_POWER_STATE;
+
+typedef enum {
+	MDP_MASTER_BLOCK,
+	MDP_CMD_BLOCK,
+	MDP_PPP_BLOCK,
+	MDP_DMA2_BLOCK,
+	MDP_DMA3_BLOCK,
+	MDP_DMA_S_BLOCK,
+	MDP_DMA_E_BLOCK,
+	MDP_OVERLAY0_BLOCK,
+	MDP_OVERLAY1_BLOCK,
+	MDP_MAX_BLOCK
+} MDP_BLOCK_TYPE;
+
+/* Let's keep Q Factor power of 2 for optimization */
+#define MDP_SCALE_Q_FACTOR 512
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*8)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/8)
+#else
+#define MDP_MAX_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_X_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#define MDP_MAX_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR*4)
+#define MDP_MIN_Y_SCALE_FACTOR (MDP_SCALE_Q_FACTOR/4)
+#endif
+
+/* SHIM Q Factor */
+#define PHI_Q_FACTOR          29
+#define PQF_PLUS_5            (PHI_Q_FACTOR + 5)	/* due to 32 phases */
+#define PQF_PLUS_4            (PHI_Q_FACTOR + 4)
+#define PQF_PLUS_2            (PHI_Q_FACTOR + 2)	/* to get 4.0 */
+#define PQF_MINUS_2           (PHI_Q_FACTOR - 2)	/* to get 0.25 */
+#define PQF_PLUS_5_PLUS_2     (PQF_PLUS_5 + 2)
+#define PQF_PLUS_5_MINUS_2    (PQF_PLUS_5 - 2)
+
+#define MDP_CONVTP(tpVal) (((tpVal&0xF800)<<8)|((tpVal&0x7E0)<<5)|((tpVal&0x1F)<<3))
+
+#define MDPOP_ROTATION (MDPOP_ROT90|MDPOP_LR|MDPOP_UD)
+#define MDP_CHKBIT(val, bit) ((bit) == ((val) & (bit)))
+
+/* overlay interface API defines */
+typedef enum {
+	MORE_IBUF,
+	FINAL_IBUF,
+	COMPLETE_IBUF
+} MDP_IBUF_STATE;
+
+struct mdp_dirty_region {
+	__u32 xoffset;		/* source origin in the x-axis */
+	__u32 yoffset;		/* source origin in the y-axis */
+	__u32 width;		/* number of pixels in the x-axis */
+	__u32 height;		/* number of pixels in the y-axis */
+};
+
+/*
+ * MDP extended data types
+ */
+typedef struct mdp_roi_s {
+	uint32 x;
+	uint32 y;
+	uint32 width;
+	uint32 height;
+	int32 lcd_x;
+	int32 lcd_y;
+	uint32 dst_width;
+	uint32 dst_height;
+} MDP_ROI;
+
+typedef struct mdp_ibuf_s {
+	uint8 *buf;
+	uint32 bpp;
+	uint32 ibuf_type;
+	uint32 ibuf_width;
+	uint32 ibuf_height;
+
+	MDP_ROI roi;
+	MDPIMG mdpImg;
+
+	int32 dma_x;
+	int32 dma_y;
+	uint32 dma_w;
+	uint32 dma_h;
+
+	uint32 vsync_enable;
+	uint32 visible_swapped;
+} MDPIBUF;
+
+struct mdp_dma_data {
+	boolean busy;
+	boolean waiting;
+	struct mutex ov_mutex;
+	struct semaphore mutex;
+	struct completion comp;
+};
+
+#define MDP_CMD_DEBUG_ACCESS_BASE   (MDP_BASE+0x10000)
+
+#define MDP_DMA2_TERM 0x1
+#define MDP_DMA3_TERM 0x2
+#define MDP_PPP_TERM 0x4
+#define MDP_DMA_S_TERM 0x8
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_DMA_E_TERM 0x10
+#define MDP_OVERLAY0_TERM 0x20
+#define MDP_OVERLAY1_TERM 0x40
+#endif
+
+#define ACTIVE_START_X_EN BIT(31)
+#define ACTIVE_START_Y_EN BIT(31)
+#define ACTIVE_HIGH 0
+#define ACTIVE_LOW 1
+#define MDP_DMA_S_DONE  BIT(2)
+#define LCDC_FRAME_START    BIT(15)
+#define LCDC_UNDERFLOW      BIT(16)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_DMA_P_DONE 	BIT(2)
+#else
+#define MDP_DMA_P_DONE 	BIT(14)
+#endif
+
+#define MDP_PPP_DONE 				BIT(0)
+#define TV_OUT_DMA3_DONE    BIT(6)
+#define TV_ENC_UNDERRUN     BIT(7)
+#define TV_OUT_DMA3_START   BIT(13)
+#define MDP_HIST_DONE       BIT(20)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+			MDP_DMA_P_DONE| \
+			TV_ENC_UNDERRUN)
+#else
+#define MDP_ANY_INTR_MASK (MDP_PPP_DONE| \
+			MDP_DMA_P_DONE| \
+			MDP_DMA_S_DONE| \
+			LCDC_UNDERFLOW| \
+			MDP_HIST_DONE| \
+			TV_ENC_UNDERRUN)
+#endif
+
+#define MDP_TOP_LUMA       16
+#define MDP_TOP_CHROMA     0
+#define MDP_BOTTOM_LUMA    19
+#define MDP_BOTTOM_CHROMA  3
+#define MDP_LEFT_LUMA      22
+#define MDP_LEFT_CHROMA    6
+#define MDP_RIGHT_LUMA     25
+#define MDP_RIGHT_CHROMA   9
+
+#define CLR_G 0x0
+#define CLR_B 0x1
+#define CLR_R 0x2
+#define CLR_ALPHA 0x3
+
+#define CLR_Y  CLR_G
+#define CLR_CB CLR_B
+#define CLR_CR CLR_R
+
+/* from lsb to msb */
+#define MDP_GET_PACK_PATTERN(a,x,y,z,bit) (((a)<<(bit*3))|((x)<<(bit*2))|((y)<<bit)|(z))
+
+/*
+ * 0x0000 0x0004 0x0008 MDP sync config
+ */
+#ifdef CONFIG_FB_MSM_MDP22
+#define MDP_SYNCFG_HGT_LOC 22
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(21)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(20)
+#else
+#define MDP_SYNCFG_HGT_LOC 21
+#define MDP_SYNCFG_VSYNC_EXT_EN BIT(20)
+#define MDP_SYNCFG_VSYNC_INT_EN BIT(19)
+#define MDP_HW_VSYNC
+#endif
+
+/*
+ * 0x0018 MDP VSYNC THREASH
+ */
+#define MDP_PRIM_BELOW_LOC 0
+#define MDP_PRIM_ABOVE_LOC 8
+
+/*
+ * MDP_PRIMARY_VSYNC_OUT_CTRL
+ * 0x0080,84,88 internal vsync pulse config
+ */
+#define VSYNC_PULSE_EN BIT(31)
+#define VSYNC_PULSE_INV BIT(30)
+
+/*
+ * 0x008c MDP VSYNC CONTROL
+ */
+#define DISP0_VSYNC_MAP_VSYNC0 0
+#define DISP0_VSYNC_MAP_VSYNC1 BIT(0)
+#define DISP0_VSYNC_MAP_VSYNC2 BIT(0)|BIT(1)
+
+#define DISP1_VSYNC_MAP_VSYNC0 0
+#define DISP1_VSYNC_MAP_VSYNC1 BIT(2)
+#define DISP1_VSYNC_MAP_VSYNC2 BIT(2)|BIT(3)
+
+#define PRIMARY_LCD_SYNC_EN BIT(4)
+#define PRIMARY_LCD_SYNC_DISABLE 0
+
+#define SECONDARY_LCD_SYNC_EN BIT(5)
+#define SECONDARY_LCD_SYNC_DISABLE 0
+
+#define EXTERNAL_LCD_SYNC_EN BIT(6)
+#define EXTERNAL_LCD_SYNC_DISABLE 0
+
+/*
+ * 0x101f0 MDP VSYNC Threshold
+ */
+#define VSYNC_THRESHOLD_ABOVE_LOC 0
+#define VSYNC_THRESHOLD_BELOW_LOC 16
+#define VSYNC_ANTI_TEAR_EN BIT(31)
+
+/*
+ * 0x10004 command config
+ */
+#define MDP_CMD_DBGBUS_EN BIT(0)
+
+/*
+ * 0x10124 or 0x101d4PPP source config
+ */
+#define PPP_SRC_C0G_8BITS (BIT(1)|BIT(0))
+#define PPP_SRC_C1B_8BITS (BIT(3)|BIT(2))
+#define PPP_SRC_C2R_8BITS (BIT(5)|BIT(4))
+#define PPP_SRC_C3A_8BITS (BIT(7)|BIT(6))
+
+#define PPP_SRC_C0G_6BITS BIT(1)
+#define PPP_SRC_C1B_6BITS BIT(3)
+#define PPP_SRC_C2R_6BITS BIT(5)
+
+#define PPP_SRC_C0G_5BITS BIT(0)
+#define PPP_SRC_C1B_5BITS BIT(2)
+#define PPP_SRC_C2R_5BITS BIT(4)
+
+#define PPP_SRC_C3_ALPHA_EN BIT(8)
+
+#define PPP_SRC_BPP_INTERLVD_1BYTES 0
+#define PPP_SRC_BPP_INTERLVD_2BYTES BIT(9)
+#define PPP_SRC_BPP_INTERLVD_3BYTES BIT(10)
+#define PPP_SRC_BPP_INTERLVD_4BYTES (BIT(10)|BIT(9))
+
+#define PPP_SRC_BPP_ROI_ODD_X BIT(11)
+#define PPP_SRC_BPP_ROI_ODD_Y BIT(12)
+#define PPP_SRC_INTERLVD_2COMPONENTS BIT(13)
+#define PPP_SRC_INTERLVD_3COMPONENTS BIT(14)
+#define PPP_SRC_INTERLVD_4COMPONENTS (BIT(14)|BIT(13))
+
+/*
+ * RGB666 unpack format
+ * TIGHT means R6+G6+B6 together
+ * LOOSE means R6+2 +G6+2+ B6+2 (with MSB)
+ * or 2+R6 +2+G6 +2+B6 (with LSB)
+ */
+#define PPP_SRC_UNPACK_TIGHT BIT(17)
+#define PPP_SRC_UNPACK_LOOSE 0
+#define PPP_SRC_UNPACK_ALIGN_LSB 0
+#define PPP_SRC_UNPACK_ALIGN_MSB BIT(18)
+
+#define PPP_SRC_FETCH_PLANES_INTERLVD 0
+#define PPP_SRC_FETCH_PLANES_PSEUDOPLNR BIT(20)
+
+#define PPP_SRC_WMV9_MODE BIT(21)	/* window media version 9 */
+
+/*
+ * 0x10138 PPP operation config
+ */
+#define PPP_OP_SCALE_X_ON BIT(0)
+#define PPP_OP_SCALE_Y_ON BIT(1)
+
+#define PPP_OP_CONVERT_RGB2YCBCR 0
+#define PPP_OP_CONVERT_YCBCR2RGB BIT(2)
+#define PPP_OP_CONVERT_ON BIT(3)
+
+#define PPP_OP_CONVERT_MATRIX_PRIMARY 0
+#define PPP_OP_CONVERT_MATRIX_SECONDARY BIT(4)
+
+#define PPP_OP_LUT_C0_ON BIT(5)
+#define PPP_OP_LUT_C1_ON BIT(6)
+#define PPP_OP_LUT_C2_ON BIT(7)
+
+/* rotate or blend enable */
+#define PPP_OP_ROT_ON BIT(8)
+
+#define PPP_OP_ROT_90 BIT(9)
+#define PPP_OP_FLIP_LR BIT(10)
+#define PPP_OP_FLIP_UD BIT(11)
+
+#define PPP_OP_BLEND_ON BIT(12)
+
+#define PPP_OP_BLEND_SRCPIXEL_ALPHA 0
+#define PPP_OP_BLEND_DSTPIXEL_ALPHA BIT(13)
+#define PPP_OP_BLEND_CONSTANT_ALPHA BIT(14)
+#define PPP_OP_BLEND_SRCPIXEL_TRANSP (BIT(13)|BIT(14))
+
+#define PPP_OP_BLEND_ALPHA_BLEND_NORMAL 0
+#define PPP_OP_BLEND_ALPHA_BLEND_REVERSE BIT(15)
+
+#define PPP_OP_DITHER_EN BIT(16)
+
+#define PPP_OP_COLOR_SPACE_RGB 0
+#define PPP_OP_COLOR_SPACE_YCBCR BIT(17)
+
+#define PPP_OP_SRC_CHROMA_RGB 0
+#define PPP_OP_SRC_CHROMA_H2V1 BIT(18)
+#define PPP_OP_SRC_CHROMA_H1V2 BIT(19)
+#define PPP_OP_SRC_CHROMA_420 (BIT(18)|BIT(19))
+#define PPP_OP_SRC_CHROMA_COSITE 0
+#define PPP_OP_SRC_CHROMA_OFFSITE BIT(20)
+
+#define PPP_OP_DST_CHROMA_RGB 0
+#define PPP_OP_DST_CHROMA_H2V1 BIT(21)
+#define PPP_OP_DST_CHROMA_H1V2 BIT(22)
+#define PPP_OP_DST_CHROMA_420 (BIT(21)|BIT(22))
+#define PPP_OP_DST_CHROMA_COSITE 0
+#define PPP_OP_DST_CHROMA_OFFSITE BIT(23)
+
+#define PPP_BLEND_CALPHA_TRNASP BIT(24)
+
+#define PPP_OP_BG_CHROMA_RGB 0
+#define PPP_OP_BG_CHROMA_H2V1 BIT(25)
+#define PPP_OP_BG_CHROMA_H1V2 BIT(26)
+#define PPP_OP_BG_CHROMA_420 BIT(25)|BIT(26)
+#define PPP_OP_BG_CHROMA_SITE_COSITE 0
+#define PPP_OP_BG_CHROMA_SITE_OFFSITE BIT(27)
+#define PPP_OP_DEINT_EN BIT(29)
+
+#define PPP_BLEND_BG_USE_ALPHA_SEL      (1 << 0)
+#define PPP_BLEND_BG_ALPHA_REVERSE      (1 << 3)
+#define PPP_BLEND_BG_SRCPIXEL_ALPHA     (0 << 1)
+#define PPP_BLEND_BG_DSTPIXEL_ALPHA     (1 << 1)
+#define PPP_BLEND_BG_CONSTANT_ALPHA     (2 << 1)
+#define PPP_BLEND_BG_CONST_ALPHA_VAL(x) ((x) << 24)
+
+#define PPP_OP_DST_RGB 0
+#define PPP_OP_DST_YCBCR BIT(30)
+/*
+ * 0x10150 PPP destination config
+ */
+#define PPP_DST_C0G_8BIT (BIT(0)|BIT(1))
+#define PPP_DST_C1B_8BIT (BIT(3)|BIT(2))
+#define PPP_DST_C2R_8BIT (BIT(5)|BIT(4))
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+
+#define PPP_DST_C0G_6BIT BIT(1)
+#define PPP_DST_C1B_6BIT BIT(3)
+#define PPP_DST_C2R_6BIT BIT(5)
+
+#define PPP_DST_C0G_5BIT BIT(0)
+#define PPP_DST_C1B_5BIT BIT(2)
+#define PPP_DST_C2R_5BIT BIT(4)
+
+#define PPP_DST_C3A_8BIT (BIT(7)|BIT(6))
+#define PPP_DST_C3ALPHA_EN BIT(8)
+
+#define PPP_DST_PACKET_CNT_INTERLVD_2ELEM BIT(9)
+#define PPP_DST_PACKET_CNT_INTERLVD_3ELEM BIT(10)
+#define PPP_DST_PACKET_CNT_INTERLVD_4ELEM (BIT(10)|BIT(9))
+#define PPP_DST_PACKET_CNT_INTERLVD_6ELEM (BIT(11)|BIT(9))
+
+#define PPP_DST_PACK_LOOSE 0
+#define PPP_DST_PACK_TIGHT BIT(13)
+#define PPP_DST_PACK_ALIGN_LSB 0
+#define PPP_DST_PACK_ALIGN_MSB BIT(14)
+
+#define PPP_DST_OUT_SEL_AXI 0
+#define PPP_DST_OUT_SEL_MDDI BIT(15)
+
+#define PPP_DST_BPP_2BYTES BIT(16)
+#define PPP_DST_BPP_3BYTES BIT(17)
+#define PPP_DST_BPP_4BYTES (BIT(17)|BIT(16))
+
+#define PPP_DST_PLANE_INTERLVD 0
+#define PPP_DST_PLANE_PLANAR BIT(18)
+#define PPP_DST_PLANE_PSEUDOPLN BIT(19)
+
+#define PPP_DST_TO_TV BIT(20)
+
+#define PPP_DST_MDDI_PRIMARY 0
+#define PPP_DST_MDDI_SECONDARY BIT(21)
+#define PPP_DST_MDDI_EXTERNAL BIT(22)
+
+/*
+ * 0x10180 DMA config
+ */
+#define DMA_DSTC0G_8BITS (BIT(1)|BIT(0))
+#define DMA_DSTC1B_8BITS (BIT(3)|BIT(2))
+#define DMA_DSTC2R_8BITS (BIT(5)|BIT(4))
+
+#define DMA_DSTC0G_6BITS BIT(1)
+#define DMA_DSTC1B_6BITS BIT(3)
+#define DMA_DSTC2R_6BITS BIT(5)
+
+#define DMA_DSTC0G_5BITS BIT(0)
+#define DMA_DSTC1B_5BITS BIT(2)
+#define DMA_DSTC2R_5BITS BIT(4)
+
+#define DMA_PACK_TIGHT                      BIT(6)
+#define DMA_PACK_LOOSE                      0
+#define DMA_PACK_ALIGN_LSB                  0
+/*
+ * use DMA_PACK_ALIGN_MSB if the upper 6 bits from 8 bits output
+ * from LCDC block maps into 6 pins out to the panel
+ */
+#define DMA_PACK_ALIGN_MSB                  BIT(7)
+#define DMA_PACK_PATTERN_RGB \
+       (MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 2)<<8)
+#define DMA_PACK_PATTERN_BGR \
+       (MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 2)<<8)
+#define DMA_OUT_SEL_AHB                     0
+#define DMA_OUT_SEL_LCDC                    BIT(20)
+#define DMA_IBUF_FORMAT_RGB888              0
+#define DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888  BIT(26)
+
+#ifdef CONFIG_FB_MSM_MDP22
+#define DMA_OUT_SEL_MDDI BIT(14)
+#define DMA_AHBM_LCD_SEL_PRIMARY 0
+#define DMA_AHBM_LCD_SEL_SECONDARY BIT(15)
+#define DMA_IBUF_C3ALPHA_EN BIT(16)
+#define DMA_DITHER_EN BIT(17)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY 0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY BIT(18)
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL BIT(19)
+#define DMA_IBUF_FORMAT_RGB565 BIT(20)
+#define DMA_IBUF_FORMAT_RGB888_OR_ARGB8888 0
+#define DMA_IBUF_NONCONTIGUOUS BIT(21)
+#else
+#define DMA_OUT_SEL_MDDI                    BIT(19)
+#define DMA_AHBM_LCD_SEL_PRIMARY            0
+#define DMA_AHBM_LCD_SEL_SECONDARY          0
+#define DMA_IBUF_C3ALPHA_EN                 0
+#define DMA_DITHER_EN                       BIT(24)
+#define DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY     0
+#define DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY   0
+#define DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL    0
+#define DMA_IBUF_FORMAT_RGB565              BIT(25)
+#define DMA_IBUF_NONCONTIGUOUS 0
+#endif
+
+/*
+ * MDDI Register
+ */
+#define MDDI_VDO_PACKET_DESC  0x5666
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_INTR_ENABLE		(msm_mdp_base + 0x0050)
+#define MDP_INTR_STATUS		(msm_mdp_base + 0x0054)
+#define MDP_INTR_CLEAR		(msm_mdp_base + 0x0058)
+#define MDP_EBI2_LCD0		(msm_mdp_base + 0x0060)
+#define MDP_EBI2_LCD1		(msm_mdp_base + 0x0064)
+#define MDP_EBI2_PORTMAP_MODE	(msm_mdp_base + 0x0070)
+
+#define MDP_DMA_P_HIST_INTR_STATUS 	(msm_mdp_base + 0x95014)
+#define MDP_DMA_P_HIST_INTR_CLEAR 	(msm_mdp_base + 0x95018)
+#define MDP_DMA_P_HIST_INTR_ENABLE 	(msm_mdp_base + 0x9501C)
+#else
+#define MDP_INTR_ENABLE		(msm_mdp_base + 0x0020)
+#define MDP_INTR_STATUS		(msm_mdp_base + 0x0024)
+#define MDP_INTR_CLEAR		(msm_mdp_base + 0x0028)
+#define MDP_EBI2_LCD0		(msm_mdp_base + 0x003c)
+#define MDP_EBI2_LCD1		(msm_mdp_base + 0x0040)
+#define MDP_EBI2_PORTMAP_MODE	(msm_mdp_base + 0x005c)
+#endif
+
+#define MDP_FULL_BYPASS_WORD43  (msm_mdp_base + 0x101ac)
+
+#define MDP_CSC_PFMVn(n)	(msm_mdp_base + 0x40400 + 4 * (n))
+#define MDP_CSC_PRMVn(n)	(msm_mdp_base + 0x40440 + 4 * (n))
+#define MDP_CSC_PRE_BV1n(n)	(msm_mdp_base + 0x40500 + 4 * (n))
+#define MDP_CSC_PRE_BV2n(n)	(msm_mdp_base + 0x40540 + 4 * (n))
+#define MDP_CSC_POST_BV1n(n)	(msm_mdp_base + 0x40580 + 4 * (n))
+#define MDP_CSC_POST_BV2n(n)	(msm_mdp_base + 0x405c0 + 4 * (n))
+
+#ifdef CONFIG_FB_MSM_MDP31
+#define MDP_CSC_PRE_LV1n(n)	(msm_mdp_base + 0x40600 + 4 * (n))
+#define MDP_CSC_PRE_LV2n(n)	(msm_mdp_base + 0x40640 + 4 * (n))
+#define MDP_CSC_POST_LV1n(n)	(msm_mdp_base + 0x40680 + 4 * (n))
+#define MDP_CSC_POST_LV2n(n)	(msm_mdp_base + 0x406c0 + 4 * (n))
+#define MDP_PPP_SCALE_COEFF_LSBn(n)	(msm_mdp_base + 0x50400 + 8 * (n))
+#define MDP_PPP_SCALE_COEFF_MSBn(n)	(msm_mdp_base + 0x50404 + 8 * (n))
+
+#define SCALE_D0_SET  0
+#define SCALE_D1_SET  BIT(0)
+#define SCALE_D2_SET  BIT(1)
+#define SCALE_U1_SET  (BIT(0)|BIT(1))
+
+#else
+#define MDP_CSC_PRE_LV1n(n)	(msm_mdp_base + 0x40580 + 4 * (n))
+#endif
+
+#define MDP_CURSOR_WIDTH 64
+#define MDP_CURSOR_HEIGHT 64
+#define MDP_CURSOR_SIZE (MDP_CURSOR_WIDTH*MDP_CURSOR_WIDTH*4)
+
+#define MDP_DMA_P_LUT_C0_EN   BIT(0)
+#define MDP_DMA_P_LUT_C1_EN   BIT(1)
+#define MDP_DMA_P_LUT_C2_EN   BIT(2)
+#define MDP_DMA_P_LUT_POST    BIT(4)
+
+void mdp_hw_init(void);
+int mdp_ppp_pipe_wait(void);
+void mdp_pipe_kickoff(uint32 term, struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr);
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+			  boolean sync);
+void mdp_dma_pan_update(struct fb_info *info);
+void mdp_refresh_screen(unsigned long data);
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+		struct file **pp_src, struct file **pp_dest);
+void mdp_lcd_update_workqueue_handler(struct work_struct *work);
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work);
+void mdp_dma2_update(struct msm_fb_data_type *mfd);
+void mdp_config_vsync(struct msm_fb_data_type *);
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd);
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht);
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr);
+void mdp_init_scale_table(void);
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer);
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr);
+
+int mdp_dma3_on(struct platform_device *pdev);
+int mdp_dma3_off(struct platform_device *pdev);
+void mdp_dma3_update(struct msm_fb_data_type *mfd);
+
+int mdp_lcdc_on(struct platform_device *pdev);
+int mdp_lcdc_off(struct platform_device *pdev);
+void mdp_lcdc_update(struct msm_fb_data_type *mfd);
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor);
+void mdp_enable_irq(uint32 term);
+void mdp_disable_irq(uint32 term);
+void mdp_disable_irq_nolock(uint32 term);
+uint32_t mdp_get_bytes_per_pixel(uint32_t format);
+
+#ifdef MDP_HW_VSYNC
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd);
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd);
+#endif
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd);
+
+/* Added to support flipping */
+void mdp_set_offset_info(struct fb_info *info, uint32 address, uint32 interval);
+
+int get_gem_img(struct mdp_img *img, unsigned long *start,
+		unsigned long *len);
+int get_img(struct mdp_img *img, struct fb_info *info,
+		unsigned long *start, unsigned long *len,
+		struct file **pp_file);
+
+
+/*int get_img(struct msmfb_data *img, struct fb_info *info,
+	unsigned long *start, unsigned long *len, struct file **pp_file);*/
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4.h b/drivers/staging/msm/mdp4.h
new file mode 100644
index 0000000..26ec8f1
--- /dev/null
+++ b/drivers/staging/msm/mdp4.h
@@ -0,0 +1,352 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP4_H
+#define MDP4_H
+
+extern struct mdp_dma_data dma2_data;
+extern struct mdp_dma_data dma_s_data;
+extern struct mdp_dma_data dma_e_data;
+extern struct mdp_histogram mdp_hist;
+extern struct completion mdp_hist_comp;
+extern boolean mdp_is_in_isr;
+extern uint32 mdp_intr_mask;
+extern spinlock_t mdp_spin_lock;
+
+
+#define MDP4_NONBLOCKING	/* enable non blocking ioctl */
+
+#define MDP4_OVERLAYPROC0_BASE	0x10000
+#define MDP4_OVERLAYPROC1_BASE	0x18000
+
+#define MDP4_VIDEO_BASE 0x20000
+#define MDP4_VIDEO_OFF 0x10000
+
+#define MDP4_RGB_BASE 0x40000
+#define MDP4_RGB_OFF 0x10000
+
+enum {		/* display */
+	PRIMARY_INTF_SEL,
+	SECONDARY_INTF_SEL,
+	EXTERNAL_INTF_SEL
+};
+
+enum {
+	LCDC_RGB_INTF,
+	DTV_INTF = LCDC_RGB_INTF,
+	MDDI_LCDC_INTF,
+	MDDI_INTF,
+	EBI2_INTF
+};
+
+enum {
+	MDDI_PRIMARY_SET,
+	MDDI_SECONDARY_SET,
+	MDDI_EXTERNAL_SET
+};
+
+enum {
+	EBI2_LCD0,
+	EBI2_LCD1
+};
+
+enum {
+	OVERLAY_MODE_NONE,
+	OVERLAY_MODE_BLT
+};
+
+enum {
+	OVERLAY_REFRESH_ON_DEMAND,
+	OVERLAY_REFRESH_VSYNC,
+	OVERLAY_REFRESH_VSYNC_HALF,
+	OVERLAY_REFRESH_VSYNC_QUARTER
+};
+
+enum {
+	OVERLAY_FRAMEBUF,
+	OVERLAY_DIRECTOUT
+};
+
+/* system interrupts */
+#define INTR_OVERLAY0_DONE		BIT(0)
+#define INTR_OVERLAY1_DONE		BIT(1)
+#define INTR_DMA_S_DONE			BIT(2)
+#define INTR_DMA_E_DONE			BIT(3)
+#define INTR_DMA_P_DONE			BIT(4)
+#define INTR_VG1_HISTOGRAM		BIT(5)
+#define INTR_VG2_HISTOGRAM		BIT(6)
+#define INTR_PRIMARY_VSYNC		BIT(7)
+#define INTR_PRIMARY_INTF_UDERRUN	BIT(8)
+#define INTR_EXTERNAL_VSYNC		BIT(9)
+#define INTR_EXTERNAL_INTF_UDERRUN	BIT(10)
+#define INTR_DMA_P_HISTOGRAM		BIT(17)
+
+/* histogram interrupts */
+#define INTR_HIST_DONE			BIT(0)
+#define INTR_HIST_RESET_SEQ_DONE	BIT(1)
+
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+#define MDP4_ANY_INTR_MASK	(INTR_OVERLAY0_DONE)
+#else
+#define MDP4_ANY_INTR_MASK	(INTR_DMA_P_DONE)
+#endif
+
+enum {
+	OVERLAY_PIPE_RGB1,
+	OVERLAY_PIPE_RGB2,
+};
+
+enum {
+	OVERLAY_PIPE_VG1,	/* video/graphic */
+	OVERLAY_PIPE_VG2
+};
+
+enum {
+	OVERLAY_TYPE_RGB,
+	OVERLAY_TYPE_VG		/* video/graphic */
+};
+
+enum {
+	MDP4_MIXER0,
+	MDP4_MIXER1
+};
+
+#define MDP4_MAX_MIXER	2
+
+enum {
+	OVERLAY_PLANE_INTERLEAVED,
+	OVERLAY_PLANE_PLANAR,
+	OVERLAY_PLANE_PSEUDO_PLANAR
+};
+
+enum {
+	MDP4_MIXER_STAGE_UNUNSED,	/* pipe not used */
+	MDP4_MIXER_STAGE_BASE,
+	MDP4_MIXER_STAGE0,	/* zorder 0 */
+	MDP4_MIXER_STAGE1,	/* zorder 1 */
+	MDP4_MIXER_STAGE2	/* zorder 2 */
+};
+
+#define MDP4_MAX_STAGE	4
+
+enum {
+	MDP4_FRAME_FORMAT_LINEAR,
+	MDP4_FRAME_FORMAT_ARGB_TILE,
+	MDP4_FRAME_FORMAT_VIDEO_SUPERTILE
+};
+
+enum {
+	MDP4_CHROMA_RGB,
+	MDP4_CHROMA_H2V1,
+	MDP4_CHROMA_H1V2,
+	MDP4_CHROMA_420
+};
+
+#define MDP4_BLEND_BG_TRANSP_EN		BIT(9)
+#define MDP4_BLEND_FG_TRANSP_EN		BIT(8)
+#define MDP4_BLEND_BG_MOD_ALPHA		BIT(7)
+#define MDP4_BLEND_BG_INV_ALPHA		BIT(6)
+#define MDP4_BLEND_BG_ALPHA_FG_CONST	(0 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_CONST	(1 << 4)
+#define MDP4_BLEND_BG_ALPHA_FG_PIXEL	(2 << 4)
+#define MDP4_BLEND_BG_ALPHA_BG_PIXEL	(3 << 4)
+#define MDP4_BLEND_FG_MOD_ALPHA		BIT(3)
+#define MDP4_BLEND_FG_INV_ALPHA		BIT(2)
+#define MDP4_BLEND_FG_ALPHA_FG_CONST	(0 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_CONST	(1 << 0)
+#define MDP4_BLEND_FG_ALPHA_FG_PIXEL	(2 << 0)
+#define MDP4_BLEND_FG_ALPHA_BG_PIXEL	(3 << 0)
+
+#define MDP4_FORMAT_SOLID_FILL		BIT(22)
+#define MDP4_FORMAT_UNPACK_ALIGN_MSB	BIT(18)
+#define MDP4_FORMAT_UNPACK_TIGHT	BIT(17)
+#define MDP4_FORMAT_90_ROTATED		BIT(12)
+#define MDP4_FORMAT_ALPHA_ENABLE	BIT(8)
+
+#define MDP4_OP_DEINT_ODD_REF  	BIT(19)
+#define MDP4_OP_IGC_LUT_EN	BIT(16)
+#define MDP4_OP_DITHER_EN     	BIT(15)
+#define MDP4_OP_FLIP_UD		BIT(14)
+#define MDP4_OP_FLIP_LR		BIT(13)
+#define MDP4_OP_CSC_EN		BIT(11)
+#define MDP4_OP_SRC_DATA_YCBCR	BIT(9)
+#define MDP4_OP_SCALEY_FIR 		(0 << 4)
+#define MDP4_OP_SCALEY_MN_PHASE 	(1 << 4)
+#define MDP4_OP_SCALEY_PIXEL_RPT	(2 << 4)
+#define MDP4_OP_SCALEX_FIR 		(0 << 2)
+#define MDP4_OP_SCALEX_MN_PHASE 	(1 << 2)
+#define MDP4_OP_SCALEX_PIXEL_RPT 	(2 << 2)
+#define MDP4_OP_SCALEY_EN	BIT(1)
+#define MDP4_OP_SCALEX_EN	BIT(0)
+
+#define MDP4_PIPE_PER_MIXER	2
+
+#define MDP4_MAX_PLANE		4
+
+#define MDP4_MAX_VIDEO_PIPE 2
+#define MDP4_MAX_RGB_PIPE 2
+#define MDP4_MAX_OVERLAY_PIPE 	16
+
+
+struct mdp4_overlay_pipe {
+	uint32 pipe_type;		/* rgb, video/graphic */
+	uint32 pipe_num;
+	uint32 pipe_ndx;
+	uint32 mixer_num;		/* which mixer used */
+	uint32 mixer_stage;		/* which stage of mixer used */
+	uint32 src_format;
+	uint32 src_width;	/* source img width */
+	uint32 src_height;	/* source img height */
+	uint32 src_w;		/* roi */
+	uint32 src_h;		/* roi */
+	uint32 src_x;		/* roi */
+	uint32 src_y;		/* roi */
+	uint32 dst_w;		/* roi */
+	uint32 dst_h;		/* roi */
+	uint32 dst_x;		/* roi */
+	uint32 dst_y;		/* roi */
+	uint32 op_mode;
+	uint32 transp;
+	uint32 blend_op;
+	uint32 phasex_step;
+	uint32 phasey_step;
+	uint32 alpha;
+	uint32 is_fg;		/* control alpha & color key */
+	uint32 srcp0_addr;	/* interleave, luma */
+	uint32 srcp0_ystride;
+	uint32 srcp1_addr;	/* pseudoplanar, chroma plane */
+	uint32 srcp1_ystride;
+	uint32 srcp2_addr;	/* planar color 2*/
+	uint32 srcp2_ystride;
+	uint32 srcp3_addr;	/* alpha/color 3 */
+	uint32 srcp3_ystride;
+	uint32 fetch_plane;
+	uint32 frame_format;		/* video */
+	uint32 chroma_site;		/* video */
+	uint32 chroma_sample;		/* video */
+	uint32 solid_fill;
+	uint32 vc1_reduce;		/* video */
+	uint32 fatch_planes;		/* video */
+	uint32 unpack_align_msb;/* 0 to LSB, 1 to MSB */
+	uint32 unpack_tight;/* 0 for loose, 1 for tight */
+	uint32 unpack_count;/* 0 = 1 component, 1 = 2 component ... */
+	uint32 rotated_90; /* has been rotated 90 degree */
+	uint32 bpp;	/* byte per pixel */
+	uint32 alpha_enable;/*  source has alpha */
+	/*
+	 * number of bits for source component,
+	 * 0 = 1 bit, 1 = 2 bits, 2 = 6 bits, 3 = 8 bits
+	 */
+	uint32 a_bit;	/* component 3, alpha */
+	uint32 r_bit;	/* component 2, R_Cr */
+	uint32 b_bit;	/* component 1, B_Cb */
+	uint32 g_bit;	/* component 0, G_lumz */
+	/*
+	 * unpack pattern
+	 * A = C3, R = C2, B = C1, G = C0
+	 */
+	uint32 element3; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element2; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element1; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	uint32 element0; /* 0 = C0, 1 = C1, 2 = C2, 3 = C3 */
+	struct completion comp;
+	struct mdp_overlay req_data;
+};
+
+void mdp4_sw_reset(unsigned long bits);
+void mdp4_display_intf_sel(int output, unsigned long intf);
+void mdp4_overlay_cfg(int layer, int blt_mode, int refresh, int direct_out);
+void mdp4_ebi2_lcd_setup(int lcd, unsigned long base, int ystride);
+void mdp4_mddi_setup(int which, unsigned long id);
+unsigned long mdp4_display_status(void);
+void mdp4_enable_clk_irq(void);
+void mdp4_disable_clk_irq(void);
+void mdp4_dma_p_update(struct msm_fb_data_type *mfd);
+void mdp4_dma_s_update(struct msm_fb_data_type *mfd);
+void mdp_pipe_ctrl(MDP_BLOCK_TYPE block, MDP_BLOCK_POWER_STATE state,
+		   boolean isr);
+void mdp4_pipe_kickoff(uint32 pipe, struct msm_fb_data_type *mfd);
+int mdp4_lcdc_on(struct platform_device *pdev);
+int mdp4_lcdc_off(struct platform_device *pdev);
+void mdp4_lcdc_update(struct msm_fb_data_type *mfd);
+void mdp4_intr_clear_set(ulong clear, ulong set);
+void mdp4_dma_p_cfg(void);
+void mdp4_hw_init(void);
+void mdp4_isr_read(int);
+void mdp4_clear_lcdc(void);
+void mdp4_mixer_blend_init(int mixer_num);
+void mdp4_vg_qseed_init(int vg_num);
+void mdp4_vg_csc_mv_setup(int vp_num);
+void mdp4_vg_csc_pre_bv_setup(int vp_num);
+void mdp4_vg_csc_post_bv_setup(int vp_num);
+void mdp4_vg_csc_pre_lv_setup(int vp_num);
+void mdp4_vg_csc_post_lv_setup(int vp_num);
+irqreturn_t mdp4_isr(int irq, void *ptr);
+void mdp4_overlay_format_to_pipe(uint32 format, struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe);
+uint32 mdp4_overlay_op_mode(struct mdp4_overlay_pipe *pipe);
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd);
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all);
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe);
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe);
+int mdp4_mixer_stage_can_run(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe);
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd);
+int mdp4_overlay_format2type(uint32 format);
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req);
+int mdp4_overlay_unset(struct fb_info *info, int ndx);
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+				struct file **pp_src_file);
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void);
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe);
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc);
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe);
+int mdp4_overlay_active(int mixer);
+void mdp4_overlay0_done_lcdc(void);
+void mdp4_overlay0_done_mddi(void);
+void mdp4_mddi_overlay_restore(void);
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+				struct mdp4_overlay_pipe *pipe);
+void mdp4_rgb_igc_lut_setup(int num);
+void mdp4_vg_igc_lut_setup(int num);
+void mdp4_mixer_gc_lut_setup(int mixer_num);
+
+#ifdef CONFIG_DEBUG_FS
+int mdp4_debugfs_init(void);
+#endif
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file);
+
+#endif /* MDP_H */
diff --git a/drivers/staging/msm/mdp4_debugfs.c b/drivers/staging/msm/mdp4_debugfs.c
new file mode 100644
index 0000000..844d467
--- /dev/null
+++ b/drivers/staging/msm/mdp4_debugfs.c
@@ -0,0 +1,181 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+#define MDP4_DEBUG_BUF	128
+
+
+static char mdp4_debug_buf[MDP4_DEBUG_BUF];
+static ulong mdp4_debug_offset;
+static ulong mdp4_base_addr;
+
+static int mdp4_offset_set(void *data, u64 val)
+{
+	mdp4_debug_offset = (int)val;
+	return 0;
+}
+
+static int mdp4_offset_get(void *data, u64 *val)
+{
+	*val = (u64)mdp4_debug_offset;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(
+			mdp4_offset_fops,
+			mdp4_offset_get,
+			mdp4_offset_set,
+			"%llx\n");
+
+
+static int mdp4_debugfs_open(struct inode *inode, struct file *file)
+{
+	/* non-seekable */
+	file->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE);
+	return 0;
+}
+
+static int mdp4_debugfs_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static ssize_t mdp4_debugfs_write(
+	struct file *file,
+	const char __user *buff,
+	size_t count,
+	loff_t *ppos)
+{
+	int cnt;
+	unsigned int data;
+
+	printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+		__func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+	if (count > sizeof(mdp4_debug_buf))
+		return -EFAULT;
+
+	if (copy_from_user(mdp4_debug_buf, buff, count))
+		return -EFAULT;
+
+
+	mdp4_debug_buf[count] = 0;	/* end of string */
+
+	cnt = sscanf(mdp4_debug_buf, "%x", &data);
+	if (cnt < 1) {
+		printk(KERN_ERR "%s: sscanf failed cnt=%d" , __func__, cnt);
+		return -EINVAL;
+	}
+
+	writel(&data, mdp4_base_addr + mdp4_debug_offset);
+
+	return 0;
+}
+
+static ssize_t mdp4_debugfs_read(
+	struct file *file,
+	char __user *buff,
+	size_t count,
+	loff_t *ppos)
+{
+	int len = 0;
+	unsigned int data;
+
+	printk(KERN_INFO "%s: offset=%d count=%d *ppos=%d\n",
+		__func__, (int)mdp4_debug_offset, (int)count, (int)*ppos);
+
+	if (*ppos)
+		return 0;	/* the end */
+
+	data = readl(mdp4_base_addr + mdp4_debug_offset);
+
+	len = snprintf(mdp4_debug_buf, 4, "%x\n", data);
+
+	if (len > 0) {
+		if (len > count)
+			len = count;
+		if (copy_to_user(buff, mdp4_debug_buf, len))
+			return -EFAULT;
+	}
+
+	printk(KERN_INFO "%s: len=%d\n", __func__, len);
+
+	if (len < 0)
+		return 0;
+
+	*ppos += len;	/* increase offset */
+
+	return len;
+}
+
+static const struct file_operations mdp4_debugfs_fops = {
+	.open = mdp4_debugfs_open,
+	.release = mdp4_debugfs_release,
+	.read = mdp4_debugfs_read,
+	.write = mdp4_debugfs_write,
+};
+
+int mdp4_debugfs_init(void)
+{
+	struct dentry *dent = debugfs_create_dir("mdp4", NULL);
+
+	if (IS_ERR(dent)) {
+		printk(KERN_ERR "%s(%d): debugfs_create_dir fail, error %ld\n",
+			__FILE__, __LINE__, PTR_ERR(dent));
+		return -1;
+	}
+
+	if (debugfs_create_file("offset", 0644, dent, 0, &mdp4_offset_fops)
+			== NULL) {
+		printk(KERN_ERR "%s(%d): debugfs_create_file: offset fail\n",
+			__FILE__, __LINE__);
+		return -1;
+	}
+
+	if (debugfs_create_file("regs", 0644, dent, 0, &mdp4_debugfs_fops)
+			== NULL) {
+		printk(KERN_ERR "%s(%d): debugfs_create_file: regs fail\n",
+			__FILE__, __LINE__);
+		return -1;
+	}
+
+	mdp4_debug_offset = 0;
+	mdp4_base_addr = (ulong) msm_mdp_base;	/* defined at msm_fb_def.h */
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
new file mode 100644
index 0000000..304bb82
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -0,0 +1,1259 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include "android_pmem.h"
+#include <linux/major.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/mutex.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+
+struct mdp4_overlay_ctrl {
+	struct mdp4_overlay_pipe plist[MDP4_MAX_OVERLAY_PIPE];
+	struct mdp4_overlay_pipe *stage[MDP4_MAX_MIXER][MDP4_MAX_STAGE];
+} mdp4_overlay_db;
+
+static struct mdp4_overlay_ctrl *ctrl = &mdp4_overlay_db;
+
+
+void mdp4_overlay_dmap_cfg(struct msm_fb_data_type *mfd, int lcdc)
+{
+	uint32	dma2_cfg_reg;
+
+	dma2_cfg_reg = DMA_DITHER_EN;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+
+	if (mfd->panel_info.bpp == 18) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else if (mfd->panel_info.bpp == 16) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	} else {
+		dma2_cfg_reg |= DMA_DSTC0G_8BITS |	/* 888 16BPP */
+		    DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+	}
+
+	if (lcdc)
+		dma2_cfg_reg |= DMA_PACK_ALIGN_MSB;
+
+	/* dma2 config register */
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+}
+
+void mdp4_overlay_dmap_xy(struct mdp4_overlay_pipe *pipe)
+{
+
+	/* dma_p source */
+	MDP_OUTP(MDP_BASE + 0x90004,
+			(pipe->src_height << 16 | pipe->src_width));
+	MDP_OUTP(MDP_BASE + 0x90008, pipe->srcp0_addr);
+	MDP_OUTP(MDP_BASE + 0x9000c, pipe->srcp0_ystride);
+
+	/* dma_p dest */
+	MDP_OUTP(MDP_BASE + 0x90010, (pipe->dst_y << 16 | pipe->dst_x));
+}
+
+#define MDP4_VG_PHASE_STEP_DEFAULT	0x20000000
+#define MDP4_VG_PHASE_STEP_SHIFT	29
+
+static int mdp4_leading_0(uint32 num)
+{
+	uint32 bit = 0x80000000;
+	int i;
+
+	for (i = 0; i < 32; i++) {
+		if (bit & num)
+			return i;
+		bit >>= 1;
+	}
+
+	return i;
+}
+
+static uint32 mdp4_scale_phase_step(int f_num, uint32 src, uint32 dst)
+{
+	uint32 val;
+	int	n;
+
+	n = mdp4_leading_0(src);
+	if (n > f_num)
+		n = f_num;
+	val = src << n;	/* maximum to reduce lose of resolution */
+	val /= dst;
+	if (n < f_num) {
+		n = f_num - n;
+		val <<= n;
+	}
+
+	return val;
+}
+
+static void mdp4_scale_setup(struct mdp4_overlay_pipe *pipe)
+{
+
+	pipe->phasex_step = MDP4_VG_PHASE_STEP_DEFAULT;
+	pipe->phasey_step = MDP4_VG_PHASE_STEP_DEFAULT;
+
+	if (pipe->dst_h && pipe->src_h != pipe->dst_h) {
+		if (pipe->dst_h >= pipe->src_h * 8)	/* too much */
+			return;
+		pipe->op_mode |= MDP4_OP_SCALEY_EN;
+
+		if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+			if (pipe->dst_h <= (pipe->src_h / 4))
+				pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+			else
+				pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+		}
+
+		pipe->phasey_step = mdp4_scale_phase_step(29,
+					pipe->src_h, pipe->dst_h);
+	}
+
+	if (pipe->dst_w && pipe->src_w != pipe->dst_w) {
+		if (pipe->dst_w >= pipe->src_w * 8)	/* too much */
+			return;
+		pipe->op_mode |= MDP4_OP_SCALEX_EN;
+
+		if (pipe->pipe_type == OVERLAY_TYPE_VG) {
+			if (pipe->dst_w <= (pipe->src_w / 4))
+				pipe->op_mode |= MDP4_OP_SCALEY_MN_PHASE;
+			else
+				pipe->op_mode |= MDP4_OP_SCALEY_FIR;
+		}
+
+		pipe->phasex_step = mdp4_scale_phase_step(29,
+					pipe->src_w, pipe->dst_w);
+	}
+}
+
+void mdp4_overlay_rgb_setup(struct mdp4_overlay_pipe *pipe)
+{
+	char *rgb_base;
+	uint32 src_size, src_xy, dst_size, dst_xy;
+	uint32 format, pattern;
+
+	rgb_base = MDP_BASE + MDP4_RGB_BASE;
+	rgb_base += (MDP4_RGB_OFF * pipe->pipe_num);
+
+	src_size = ((pipe->src_h << 16) | pipe->src_w);
+	src_xy = ((pipe->src_y << 16) | pipe->src_x);
+	dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+	dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+	format = mdp4_overlay_format(pipe);
+	pattern = mdp4_overlay_unpack_pattern(pipe);
+
+	pipe->op_mode |= MDP4_OP_IGC_LUT_EN;
+
+	mdp4_scale_setup(pipe);
+
+	outpdw(rgb_base + 0x0000, src_size);	/* MDP_RGB_SRC_SIZE */
+	outpdw(rgb_base + 0x0004, src_xy);	/* MDP_RGB_SRC_XY */
+	outpdw(rgb_base + 0x0008, dst_size);	/* MDP_RGB_DST_SIZE */
+	outpdw(rgb_base + 0x000c, dst_xy);	/* MDP_RGB_DST_XY */
+
+	outpdw(rgb_base + 0x0010, pipe->srcp0_addr);
+	outpdw(rgb_base + 0x0040, pipe->srcp0_ystride);
+
+	outpdw(rgb_base + 0x0050, format);/* MDP_RGB_SRC_FORMAT */
+	outpdw(rgb_base + 0x0054, pattern);/* MDP_RGB_SRC_UNPACK_PATTERN */
+	outpdw(rgb_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+	outpdw(rgb_base + 0x005c, pipe->phasex_step);
+	outpdw(rgb_base + 0x0060, pipe->phasey_step);
+
+	/* 16 bytes-burst x 3 req <= 48 bytes */
+	outpdw(rgb_base + 0x1004, 0xc2);	/* MDP_RGB_FETCH_CFG */
+}
+
+void mdp4_overlay_vg_setup(struct mdp4_overlay_pipe *pipe)
+{
+	char *vg_base;
+	uint32 frame_size, src_size, src_xy, dst_size, dst_xy;
+	uint32 format, pattern;
+
+	vg_base = MDP_BASE + MDP4_VIDEO_BASE;
+	vg_base += (MDP4_VIDEO_OFF * pipe->pipe_num);
+
+	frame_size = ((pipe->src_height << 16) | pipe->src_width);
+	src_size = ((pipe->src_h << 16) | pipe->src_w);
+	src_xy = ((pipe->src_y << 16) | pipe->src_x);
+	dst_size = ((pipe->dst_h << 16) | pipe->dst_w);
+	dst_xy = ((pipe->dst_y << 16) | pipe->dst_x);
+
+	format = mdp4_overlay_format(pipe);
+	pattern = mdp4_overlay_unpack_pattern(pipe);
+
+	pipe->op_mode |= (MDP4_OP_CSC_EN | MDP4_OP_SRC_DATA_YCBCR |
+				MDP4_OP_IGC_LUT_EN);
+
+	mdp4_scale_setup(pipe);
+
+	outpdw(vg_base + 0x0000, src_size);	/* MDP_RGB_SRC_SIZE */
+	outpdw(vg_base + 0x0004, src_xy);	/* MDP_RGB_SRC_XY */
+	outpdw(vg_base + 0x0008, dst_size);	/* MDP_RGB_DST_SIZE */
+	outpdw(vg_base + 0x000c, dst_xy);	/* MDP_RGB_DST_XY */
+	outpdw(vg_base + 0x0048, frame_size);	/* TILE frame size */
+
+	/* luma component plane */
+	outpdw(vg_base + 0x0010, pipe->srcp0_addr);
+
+	/* chroma component plane */
+	outpdw(vg_base + 0x0014, pipe->srcp1_addr);
+
+	outpdw(vg_base + 0x0040,
+			pipe->srcp1_ystride << 16 | pipe->srcp0_ystride);
+
+	outpdw(vg_base + 0x0050, format);	/* MDP_RGB_SRC_FORMAT */
+	outpdw(vg_base + 0x0054, pattern);	/* MDP_RGB_SRC_UNPACK_PATTERN */
+	outpdw(vg_base + 0x0058, pipe->op_mode);/* MDP_RGB_OP_MODE */
+	outpdw(vg_base + 0x005c, pipe->phasex_step);
+	outpdw(vg_base + 0x0060, pipe->phasey_step);
+
+	if (pipe->op_mode & MDP4_OP_DITHER_EN) {
+		outpdw(vg_base + 0x0068,
+			pipe->r_bit << 4 | pipe->b_bit << 2 | pipe->g_bit);
+	}
+
+	/* 16 bytes-burst x 3 req <= 48 bytes */
+	outpdw(vg_base + 0x1004, 0xc2);	/* MDP_VG_FETCH_CFG */
+}
+
+int mdp4_overlay_format2type(uint32 format)
+{
+	switch (format) {
+	case MDP_RGB_565:
+	case MDP_RGB_888:
+	case MDP_BGR_565:
+	case MDP_ARGB_8888:
+	case MDP_RGBA_8888:
+	case MDP_BGRA_8888:
+		return OVERLAY_TYPE_RGB;
+	case MDP_YCRYCB_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CBCR_H2V2_TILE:
+	case MDP_Y_CRCB_H2V2_TILE:
+		return OVERLAY_TYPE_VG;
+	default:
+		return -ERANGE;
+	}
+
+}
+
+#define C3_ALPHA	3	/* alpha */
+#define C2_R_Cr		2	/* R/Cr */
+#define C1_B_Cb		1	/* B/Cb */
+#define C0_G_Y		0	/* G/luma */
+
+int mdp4_overlay_format2pipe(struct mdp4_overlay_pipe *pipe)
+{
+	switch (pipe->src_format) {
+	case MDP_RGB_565:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 1;	/* R, 5 bits */
+		pipe->b_bit = 1;	/* B, 5 bits */
+		pipe->g_bit = 2;	/* G, 6 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_RGB_888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 3;	/* 3 bpp */
+		break;
+	case MDP_BGR_565:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;
+		pipe->r_bit = 1;	/* R, 5 bits */
+		pipe->b_bit = 1;	/* B, 5 bits */
+		pipe->g_bit = 2;	/* G, 6 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 2;
+		pipe->element2 = C1_B_Cb;	/* B */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C2_R_Cr;	/* R */
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_ARGB_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C3_ALPHA;	/* alpha */
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_RGBA_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C2_R_Cr;	/* R */
+		pipe->element2 = C0_G_Y;	/* G */
+		pipe->element1 = C1_B_Cb;	/* B */
+		pipe->element0 = C3_ALPHA;	/* alpha */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_BGRA_8888:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 3;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 1;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C1_B_Cb;	/* B */
+		pipe->element2 = C0_G_Y;	/* G */
+		pipe->element1 = C2_R_Cr;	/* R */
+		pipe->element0 = C3_ALPHA;	/* alpha */
+		pipe->bpp = 4;		/* 4 bpp */
+		break;
+	case MDP_YCRYCB_H2V1:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_INTERLEAVED;
+		pipe->a_bit = 0;	/* alpha, 4 bits */
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 3;
+		pipe->element3 = C0_G_Y;	/* G */
+		pipe->element2 = C2_R_Cr;	/* R */
+		pipe->element1 = C0_G_Y;	/* G */
+		pipe->element0 = C1_B_Cb;	/* B */
+		pipe->bpp = 2;		/* 2 bpp */
+		pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		break;
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+		pipe->frame_format = MDP4_FRAME_FORMAT_LINEAR;
+		pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 1;		/* 2 */
+		pipe->element3 = C0_G_Y;	/* not used */
+		pipe->element2 = C0_G_Y;	/* not used */
+		if (pipe->src_format == MDP_Y_CRCB_H2V1) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V1) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_H2V1;
+		} else if (pipe->src_format == MDP_Y_CRCB_H2V2) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V2) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		}
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	case MDP_Y_CBCR_H2V2_TILE:
+	case MDP_Y_CRCB_H2V2_TILE:
+		pipe->frame_format = MDP4_FRAME_FORMAT_VIDEO_SUPERTILE;
+		pipe->fetch_plane = OVERLAY_PLANE_PSEUDO_PLANAR;
+		pipe->a_bit = 0;
+		pipe->r_bit = 3;	/* R, 8 bits */
+		pipe->b_bit = 3;	/* B, 8 bits */
+		pipe->g_bit = 3;	/* G, 8 bits */
+		pipe->alpha_enable = 0;
+		pipe->unpack_tight = 1;
+		pipe->unpack_align_msb = 0;
+		pipe->unpack_count = 1;		/* 2 */
+		pipe->element3 = C0_G_Y;	/* not used */
+		pipe->element2 = C0_G_Y;	/* not used */
+		if (pipe->src_format == MDP_Y_CRCB_H2V2_TILE) {
+			pipe->element1 = C2_R_Cr;	/* R */
+			pipe->element0 = C1_B_Cb;	/* B */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		} else if (pipe->src_format == MDP_Y_CBCR_H2V2_TILE) {
+			pipe->element1 = C1_B_Cb;	/* B */
+			pipe->element0 = C2_R_Cr;	/* R */
+			pipe->chroma_sample = MDP4_CHROMA_420;
+		}
+		pipe->bpp = 2;	/* 2 bpp */
+		break;
+	default:
+		/* not likely */
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+/*
+ * color_key_convert: output with 12 bits color key
+ */
+static uint32 color_key_convert(int start, int num, uint32 color)
+{
+
+	uint32 data;
+
+	data = (color >> start) & ((1 << num) - 1);
+
+	if (num == 5)
+		data = (data << 7) + (data << 2) + (data >> 3);
+	else if (num == 6)
+		data = (data << 6) + data;
+	else	/* 8 bits */
+		data = (data << 4) + (data >> 4);
+
+	return data;
+
+}
+
+void transp_color_key(int format, uint32 transp,
+			uint32 *c0, uint32 *c1, uint32 *c2)
+{
+	int b_start, g_start, r_start;
+	int b_num, g_num, r_num;
+
+	switch (format) {
+	case MDP_RGB_565:
+		b_start = 0;
+		g_start = 5;
+		r_start = 11;
+		r_num = 5;
+		g_num = 6;
+		b_num = 5;
+		break;
+	case MDP_RGB_888:
+	case MDP_XRGB_8888:
+	case MDP_ARGB_8888:
+		b_start = 0;
+		g_start = 8;
+		r_start = 16;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	case MDP_BGR_565:
+		b_start = 11;
+		g_start = 5;
+		r_start = 0;
+		r_num = 5;
+		g_num = 6;
+		b_num = 5;
+		break;
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CBCR_H2V1:
+		b_start = 8;
+		g_start = 16;
+		r_start = 0;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CRCB_H2V1:
+		b_start = 0;
+		g_start = 16;
+		r_start = 8;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	default:
+		b_start = 0;
+		g_start = 8;
+		r_start = 16;
+		r_num = 8;
+		g_num = 8;
+		b_num = 8;
+		break;
+	}
+
+	*c0 = color_key_convert(g_start, g_num, transp);
+	*c1 = color_key_convert(b_start, b_num, transp);
+	*c2 = color_key_convert(r_start, r_num, transp);
+}
+
+uint32 mdp4_overlay_format(struct mdp4_overlay_pipe *pipe)
+{
+	uint32	format;
+
+	format = 0;
+
+	if (pipe->solid_fill)
+		format |= MDP4_FORMAT_SOLID_FILL;
+
+	if (pipe->unpack_align_msb)
+		format |= MDP4_FORMAT_UNPACK_ALIGN_MSB;
+
+	if (pipe->unpack_tight)
+		format |= MDP4_FORMAT_UNPACK_TIGHT;
+
+	if (pipe->alpha_enable)
+		format |= MDP4_FORMAT_ALPHA_ENABLE;
+
+	format |= (pipe->unpack_count << 13);
+	format |= ((pipe->bpp - 1) << 9);
+	format |= (pipe->a_bit << 6);
+	format |= (pipe->r_bit << 4);
+	format |= (pipe->b_bit << 2);
+	format |= pipe->g_bit;
+
+	format |= (pipe->frame_format << 29);
+
+	if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+		/* video/graphic */
+		format |= (pipe->fetch_plane << 19);
+		format |= (pipe->chroma_site << 28);
+		format |= (pipe->chroma_sample << 26);
+	}
+
+	return format;
+}
+
+uint32 mdp4_overlay_unpack_pattern(struct mdp4_overlay_pipe *pipe)
+{
+	return (pipe->element3 << 24) | (pipe->element2 << 16) |
+			(pipe->element1 << 8) | pipe->element0;
+}
+
+void mdp4_overlayproc_cfg(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data;
+	char *overlay_base;
+
+	if (pipe->mixer_num == MDP4_MIXER1)
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* MDP_OVERLAYPROC_CFG */
+	outpdw(overlay_base + 0x0004, 0x01); /* directout */
+	data = pipe->src_height;
+	data <<= 16;
+	data |= pipe->src_width;
+	outpdw(overlay_base + 0x0008, data); /* ROI, height + width */
+	outpdw(overlay_base + 0x000c, pipe->srcp0_addr);
+	outpdw(overlay_base + 0x0010, pipe->srcp0_ystride);
+	outpdw(overlay_base + 0x0014, 0x4);	/* GC_LUT_EN, 888 */
+}
+
+int mdp4_overlay_active(int mixer)
+{
+	uint32 data, mask, i;
+	int p1, p2;
+
+	data = inpdw(MDP_BASE + 0x10100);
+	p1 = 0;
+	p2 = 0;
+	for (i = 0; i < 8; i++) {
+		mask = data & 0x0f;
+		if (mask) {
+			if (mask <= 4)
+				p1++;
+			else
+				p2++;
+		}
+		data >>= 4;
+	}
+
+	if (mixer)
+		return p2;
+	else
+		return p1;
+}
+
+void mdp4_mixer_stage_up(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data, mask, snum, stage, mixer;
+
+	stage = pipe->mixer_stage;
+	mixer = pipe->mixer_num;
+
+	/* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
+	data = inpdw(MDP_BASE + 0x10100);
+
+	if (mixer == MDP4_MIXER1)
+		stage += 8;
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+		snum = 0;
+		snum += (4 * pipe->pipe_num);
+	} else {
+		snum = 8;
+		snum += (4 * pipe->pipe_num);	/* RGB1 and RGB2 */
+	}
+
+	mask = 0x0f;
+	mask <<= snum;
+	stage <<= snum;
+	data &= ~mask;	/* clear old bits */
+
+	data |= stage;
+
+	outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+	data = inpdw(MDP_BASE + 0x10100);
+
+	ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = pipe;	/* keep it */
+}
+
+void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe)
+{
+	uint32 data, mask, snum, stage, mixer;
+
+	stage = pipe->mixer_stage;
+	mixer = pipe->mixer_num;
+
+	if (pipe != ctrl->stage[mixer][stage])	/* not runing */
+		return;
+
+	/* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
+	data = inpdw(MDP_BASE + 0x10100);
+
+	if (mixer == MDP4_MIXER1)
+		stage += 8;
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG) {/* VG1 and VG2 */
+		snum = 0;
+		snum += (4 * pipe->pipe_num);
+	} else {
+		snum = 8;
+		snum += (4 * pipe->pipe_num);	/* RGB1 and RGB2 */
+	}
+
+	mask = 0x0f;
+	mask <<= snum;
+	data &= ~mask;	/* clear old bits */
+
+	outpdw(MDP_BASE + 0x10100, data); /* MDP_LAYERMIXER_IN_CFG */
+
+	data = inpdw(MDP_BASE + 0x10100);
+
+	ctrl->stage[pipe->mixer_num][pipe->mixer_stage] = NULL;	/* clear it */
+}
+
+void mdp4_mixer_blend_setup(struct mdp4_overlay_pipe *pipe)
+{
+	unsigned char *overlay_base;
+	uint32 c0, c1, c2, blend_op;
+	int off;
+
+	if (pipe->mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* stage 0 to stage 2 */
+	off = 0x20 * (pipe->mixer_stage - MDP4_MIXER_STAGE0);
+
+	blend_op = 0;
+	if (pipe->alpha_enable) 	/* ARGB */
+		blend_op = MDP4_BLEND_FG_ALPHA_FG_PIXEL |
+				MDP4_BLEND_BG_ALPHA_FG_PIXEL;
+	else
+		blend_op = (MDP4_BLEND_BG_ALPHA_BG_CONST |
+				MDP4_BLEND_FG_ALPHA_FG_CONST);
+
+
+	if (pipe->alpha_enable == 0) { 	/* not ARGB */
+		if (pipe->is_fg) {
+			outpdw(overlay_base + off + 0x108, pipe->alpha);
+			outpdw(overlay_base + off + 0x10c, 0xff - pipe->alpha);
+		} else {
+			outpdw(overlay_base + off + 0x108, 0xff - pipe->alpha);
+			outpdw(overlay_base + off + 0x10c, pipe->alpha);
+		}
+	}
+
+	if (pipe->transp != MDP_TRANSP_NOP) {
+		transp_color_key(pipe->src_format, pipe->transp, &c0, &c1, &c2);
+		if (pipe->is_fg) {
+			blend_op |= MDP4_BLEND_FG_TRANSP_EN; /* Fg blocked */
+			/* lower limit */
+			if (c0 > 0x10)
+				c0 -= 0x10;
+			if (c1 > 0x10)
+				c1 -= 0x10;
+			if (c2 > 0x10)
+				c2 -= 0x10;
+			outpdw(overlay_base + off + 0x110,
+						(c1 << 16 | c0));/* low */
+			outpdw(overlay_base + off + 0x114, c2);/* low */
+			/* upper limit */
+			if ((c0 + 0x20) < 0x0fff)
+				c0 += 0x20;
+			else
+				c0 = 0x0fff;
+			if ((c1 + 0x20) < 0x0fff)
+				c1 += 0x20;
+			else
+				c1 = 0x0fff;
+			if ((c2 + 0x20) < 0x0fff)
+				c2 += 0x20;
+			else
+				c2 = 0x0fff;
+			outpdw(overlay_base + off + 0x118,
+					(c1 << 16 | c0));/* high */
+			outpdw(overlay_base + off + 0x11c, c2);/* high */
+		} else {
+			blend_op |= MDP4_BLEND_BG_TRANSP_EN; /* bg blocked */
+			/* lower limit */
+			if (c0 > 0x10)
+				c0 -= 0x10;
+			if (c1 > 0x10)
+				c1 -= 0x10;
+			if (c2 > 0x10)
+				c2 -= 0x10;
+			outpdw(overlay_base + 0x180,
+						(c1 << 16 | c0));/* low */
+			outpdw(overlay_base + 0x184, c2);/* low */
+			/* upper limit */
+			if ((c0 + 0x20) < 0x0fff)
+				c0 += 0x20;
+			else
+				c0 = 0x0fff;
+			if ((c1 + 0x20) < 0x0fff)
+				c1 += 0x20;
+			else
+				c1 = 0x0fff;
+			if ((c2 + 0x20) < 0x0fff)
+				c2 += 0x20;
+			else
+				c2 = 0x0fff;
+			outpdw(overlay_base + 0x188,
+						(c1 << 16 | c0));/* high */
+			outpdw(overlay_base + 0x18c, c2);/* high */
+		}
+	}
+	outpdw(overlay_base + off + 0x104, blend_op);
+}
+
+void mdp4_overlay_reg_flush(struct mdp4_overlay_pipe *pipe, int all)
+{
+	uint32 bits = 0;
+
+	if (pipe->mixer_num == MDP4_MIXER1)
+		bits |= 0x02;
+	else
+		bits |= 0x01;
+
+	if (all) {
+		if (pipe->pipe_type == OVERLAY_TYPE_RGB) {
+			if (pipe->pipe_num == OVERLAY_PIPE_RGB2)
+				bits |= 0x20;
+			else
+				bits |= 0x10;
+		} else {
+			if (pipe->pipe_num == OVERLAY_PIPE_VG2)
+				bits |= 0x08;
+			else
+				bits |= 0x04;
+		}
+	}
+
+	outpdw(MDP_BASE + 0x18000, bits);	/* MDP_OVERLAY_REG_FLUSH */
+
+	while (inpdw(MDP_BASE + 0x18000) & bits) /* self clear when complete */
+		;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_ndx2pipe(int ndx)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	if (ndx == 0 || ndx >= MDP4_MAX_OVERLAY_PIPE)
+		return NULL;
+
+	pipe = &ctrl->plist[ndx - 1];	/* ndx start from 1 */
+
+	if (pipe->pipe_ndx == 0)
+		return NULL;
+
+	return pipe;
+}
+
+struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void)
+{
+	int i;
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = &ctrl->plist[0];
+	for (i = 0; i < MDP4_MAX_OVERLAY_PIPE; i++) {
+		if (pipe->pipe_ndx == 0) {
+			pipe->pipe_ndx = i + 1;	/* start from 1 */
+			init_completion(&pipe->comp);
+	printk(KERN_INFO "mdp4_overlay_pipe_alloc: pipe=%x ndx=%d\n",
+					(int)pipe, pipe->pipe_ndx);
+			return pipe;
+		}
+		pipe++;
+	}
+
+	return NULL;
+}
+
+
+void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe)
+{
+	printk(KERN_INFO "mdp4_overlay_pipe_free: pipe=%x ndx=%d\n",
+					(int)pipe, pipe->pipe_ndx);
+	memset(pipe, 0, sizeof(*pipe));
+}
+
+static int get_pipe_num(int ptype, int stage)
+{
+	if (ptype == OVERLAY_TYPE_RGB) {
+		if (stage == MDP4_MIXER_STAGE_BASE)
+			return OVERLAY_PIPE_RGB1;
+		else
+			return OVERLAY_PIPE_RGB2;
+	} else {
+		if (stage == MDP4_MIXER_STAGE0)
+			return OVERLAY_PIPE_VG1;
+		else
+			return OVERLAY_PIPE_VG2;
+	}
+}
+
+int mdp4_overlay_req_check(uint32 id, uint32 z_order, uint32 mixer)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = ctrl->stage[mixer][z_order];
+
+	if (pipe == NULL)
+		return 0;
+
+	if (pipe->pipe_ndx == id)	/* same req, recycle */
+		return 0;
+
+	return -EPERM;
+}
+
+static int mdp4_overlay_req2pipe(struct mdp_overlay *req, int mixer,
+			struct mdp4_overlay_pipe **ppipe)
+{
+	struct mdp4_overlay_pipe *pipe;
+	int ret, ptype;
+
+	if (mixer >= MDP4_MAX_MIXER) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: mixer out of range!\n");
+		return -ERANGE;
+	}
+
+	if (req->z_order < 0 || req->z_order > 2) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: z_order=%d out of range!\n",
+				req->z_order);
+		return -ERANGE;
+	}
+
+	if (req->src_rect.h == 0 || req->src_rect.w == 0) {
+		printk(KERN_ERR "mpd_overlay_req2pipe: src img of zero size!\n");
+		return -EINVAL;
+	}
+
+	ret = mdp4_overlay_req_check(req->id, req->z_order, mixer);
+	if (ret < 0)
+		return ret;
+
+	ptype = mdp4_overlay_format2type(req->src.format);
+	if (ptype < 0)
+		return ptype;
+
+	if (req->id == MSMFB_NEW_REQUEST)  /* new request */
+		pipe = mdp4_overlay_pipe_alloc();
+	else
+		pipe = mdp4_overlay_ndx2pipe(req->id);
+
+	if (pipe == NULL)
+		return -ENOMEM;
+
+	pipe->src_format = req->src.format;
+	ret = mdp4_overlay_format2pipe(pipe);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * base layer == 1, reserved for frame buffer
+	 * zorder 0 == stage 0 == 2
+	 * zorder 1 == stage 1 == 3
+	 * zorder 2 == stage 2 == 4
+	 */
+	if (req->id == MSMFB_NEW_REQUEST) {  /* new request */
+		pipe->mixer_stage = req->z_order + MDP4_MIXER_STAGE0;
+		pipe->pipe_type = ptype;
+		pipe->pipe_num = get_pipe_num(ptype, pipe->mixer_stage);
+		printk(KERN_INFO "mpd4_overlay_req2pipe: zorder=%d pipe_num=%d\n",
+				req->z_order, pipe->pipe_num);
+	}
+
+	pipe->src_width = req->src.width & 0x07ff;	/* source img width */
+	pipe->src_height = req->src.height & 0x07ff;	/* source img height */
+	pipe->src_h = req->src_rect.h & 0x07ff;
+	pipe->src_w = req->src_rect.w & 0x07ff;
+	pipe->src_y = req->src_rect.y & 0x07ff;
+	pipe->src_x = req->src_rect.x & 0x07ff;
+	pipe->dst_h = req->dst_rect.h & 0x07ff;
+	pipe->dst_w = req->dst_rect.w & 0x07ff;
+	pipe->dst_y = req->dst_rect.y & 0x07ff;
+	pipe->dst_x = req->dst_rect.x & 0x07ff;
+
+	if (req->flags & MDP_FLIP_LR)
+		pipe->op_mode |= MDP4_OP_FLIP_LR;
+
+	if (req->flags & MDP_FLIP_UD)
+		pipe->op_mode |= MDP4_OP_FLIP_UD;
+
+	if (req->flags & MDP_DITHER)
+		pipe->op_mode |= MDP4_OP_DITHER_EN;
+
+	if (req->flags & MDP_DEINTERLACE)
+		pipe->op_mode |= MDP4_OP_DEINT_ODD_REF;
+
+	pipe->is_fg = req->is_fg;/* control alpha and color key */
+
+	pipe->alpha = req->alpha & 0x0ff;
+
+	pipe->transp = req->transp_mask;
+
+	*ppipe = pipe;
+
+	return 0;
+}
+
+int get_img(struct msmfb_data *img, struct fb_info *info,
+	unsigned long *start, unsigned long *len, struct file **pp_file)
+{
+	int put_needed, ret = 0;
+	struct file *file;
+#ifdef CONFIG_ANDROID_PMEM
+	unsigned long vstart;
+#endif
+
+#ifdef CONFIG_ANDROID_PMEM
+	if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+		return 0;
+#endif
+	file = fget_light(img->memory_id, &put_needed);
+	if (file == NULL)
+		return -1;
+
+	if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+		*start = info->fix.smem_start;
+		*len = info->fix.smem_len;
+		*pp_file = file;
+	} else {
+		ret = -1;
+		fput_light(file, put_needed);
+	}
+	return ret;
+}
+int mdp4_overlay_get(struct fb_info *info, struct mdp_overlay *req)
+{
+	struct mdp4_overlay_pipe *pipe;
+
+	pipe = mdp4_overlay_ndx2pipe(req->id);
+	if (pipe == NULL)
+		return -ENODEV;
+
+	*req = pipe->req_data;
+
+	return 0;
+}
+
+int mdp4_overlay_set(struct fb_info *info, struct mdp_overlay *req)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	int ret, mixer;
+	struct mdp4_overlay_pipe *pipe;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	if (req->src.format == MDP_FB_FORMAT)
+		req->src.format = mfd->fb_imgType;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	mixer = info->node; /* minor number of char device */
+
+	ret = mdp4_overlay_req2pipe(req, mixer, &pipe);
+	if (ret < 0) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		return ret;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+
+	if (lcdc == 0) { /* mddi */
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	}
+
+	/* return id back to user */
+	req->id = pipe->pipe_ndx;	/* pipe_ndx start from 1 */
+	pipe->req_data = *req;		/* keep original req */
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
+
+int mdp4_overlay_unset(struct fb_info *info, int ndx)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct mdp4_overlay_pipe *pipe;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	pipe = mdp4_overlay_ndx2pipe(ndx);
+
+	if (pipe == NULL) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		return -ENODEV;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+
+	mdp4_mixer_stage_down(pipe);
+
+	if (lcdc == 0) { /* mddi */
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	}
+
+	if (lcdc) /* LCDC mode */
+		mdp4_overlay_reg_flush(pipe, 0);
+
+	mdp4_overlay_pipe_free(pipe);
+
+	if (lcdc == 0) { /* mddi */
+		mdp4_mddi_overlay_restore();
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
+
+struct tile_desc {
+	uint32 width;  /* tile's width */
+	uint32 height; /* tile's height */
+	uint32 row_tile_w; /* tiles per row's width */
+	uint32 row_tile_h; /* tiles per row's height */
+};
+
+void tile_samsung(struct tile_desc *tp)
+{
+	/*
+	 * each row of samsung tile consists of two tiles in height
+	 * and two tiles in width which means width should align to
+	 * 64 x 2 bytes and height should align to 32 x 2 bytes.
+	 * video decoder generate two tiles in width and one tile
+	 * in height which ends up height align to 32 X 1 bytes.
+	 */
+	tp->width = 64;		/* 64 bytes */
+	tp->row_tile_w = 2;	/* 2 tiles per row's width */
+	tp->height = 32;	/* 32 bytes */
+	tp->row_tile_h = 1;	/* 1 tiles per row's height */
+}
+
+uint32 tile_mem_size(struct mdp4_overlay_pipe *pipe, struct tile_desc *tp)
+{
+	uint32 tile_w, tile_h;
+	uint32 row_num_w, row_num_h;
+
+
+	tile_w = tp->width * tp->row_tile_w;
+	tile_h = tp->height * tp->row_tile_h;
+
+	row_num_w = (pipe->src_width + tile_w - 1) / tile_w;
+	row_num_h = (pipe->src_height + tile_h - 1) / tile_h;
+
+	return row_num_w * row_num_h * tile_w * tile_h;
+}
+
+int mdp4_overlay_play(struct fb_info *info, struct msmfb_overlay_data *req,
+		struct file **pp_src_file)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct msmfb_data *img;
+	struct mdp4_overlay_pipe *pipe;
+	ulong start, addr;
+	ulong len = 0;
+	struct file *p_src_file = 0;
+	int lcdc;
+
+	if (mfd == NULL)
+		return -ENODEV;
+
+	pipe = mdp4_overlay_ndx2pipe(req->id);
+	if (pipe == NULL)
+		return -ENODEV;
+
+	if (mutex_lock_interruptible(&mfd->dma->ov_mutex))
+		return -EINTR;
+
+	img = &req->data;
+	get_img(img, info, &start, &len, &p_src_file);
+	if (len == 0) {
+		mutex_unlock(&mfd->dma->ov_mutex);
+		printk(KERN_ERR "mdp_overlay_play: could not retrieve"
+				       " image from memory\n");
+		return -1;
+	}
+	*pp_src_file = p_src_file;
+
+	addr = start + img->offset;
+	pipe->srcp0_addr = addr;
+	pipe->srcp0_ystride = pipe->src_width * pipe->bpp;
+
+	if (pipe->fetch_plane == OVERLAY_PLANE_PSEUDO_PLANAR) {
+		if (pipe->frame_format == MDP4_FRAME_FORMAT_VIDEO_SUPERTILE) {
+			struct tile_desc tile;
+
+			tile_samsung(&tile);
+			pipe->srcp1_addr = addr + tile_mem_size(pipe, &tile);
+		} else
+			pipe->srcp1_addr = addr +
+					pipe->src_width * pipe->src_height;
+
+		pipe->srcp0_ystride = pipe->src_width;
+		pipe->srcp1_ystride = pipe->src_width;
+	}
+
+	lcdc = inpdw(MDP_BASE + 0xc0000);
+	lcdc &= 0x01; /* LCDC mode */
+
+	if (pipe->pipe_type == OVERLAY_TYPE_VG)
+		mdp4_overlay_vg_setup(pipe);	/* video/graphic pipe */
+	else
+		mdp4_overlay_rgb_setup(pipe);	/* rgb pipe */
+
+	mdp4_mixer_blend_setup(pipe);
+	mdp4_mixer_stage_up(pipe);
+
+	if (lcdc) { /* LCDC mode */
+		mdp4_overlay_reg_flush(pipe, 1);
+	}
+
+	if (lcdc) { /* LCDC mode */
+		if (pipe->mixer_stage != MDP4_MIXER_STAGE_BASE) { /* done */
+			mutex_unlock(&mfd->dma->ov_mutex);
+			return 0;
+		}
+	}
+
+	if (lcdc == 0) { /* MDDI mode */
+#ifdef MDP4_NONBLOCKING
+		if (mfd->panel_power_on)
+#else
+		if (!mfd->dma->busy && mfd->panel_power_on)
+#endif
+			mdp4_mddi_overlay_kickoff(mfd, pipe);
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp4_overlay_lcdc.c b/drivers/staging/msm/mdp4_overlay_lcdc.c
new file mode 100644
index 0000000..a6ab8ec
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_lcdc.c
@@ -0,0 +1,313 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE	0xC0000
+#else
+#define LCDC_BASE	0xE0000
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+static struct mdp4_overlay_pipe *lcdc_pipe;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+	int lcdc_width;
+	int lcdc_height;
+	int lcdc_bpp;
+	int lcdc_border_clr;
+	int lcdc_underflow_clr;
+	int lcdc_hsync_skew;
+
+	int hsync_period;
+	int hsync_ctrl;
+	int vsync_period;
+	int display_hctl;
+	int display_v_start;
+	int display_v_end;
+	int active_hctl;
+	int active_h_start;
+	int active_h_end;
+	int active_v_start;
+	int active_v_end;
+	int ctrl_polarity;
+	int h_back_porch;
+	int h_front_porch;
+	int v_back_porch;
+	int v_front_porch;
+	int hsync_pulse_width;
+	int vsync_pulse_width;
+	int hsync_polarity;
+	int vsync_polarity;
+	int data_en_polarity;
+	int hsync_start_x;
+	int hsync_end_x;
+	uint8 *buf;
+	int bpp, ptype;
+	uint32 format;
+	struct fb_info *fbi;
+	struct fb_var_screeninfo *var;
+	struct msm_fb_data_type *mfd;
+	struct mdp4_overlay_pipe *pipe;
+	int ret;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	var = &fbi->var;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	if (bpp == 2)
+		format = MDP_RGB_565;
+	else if (bpp == 3)
+		format = MDP_RGB_888;
+	else
+		format = MDP_ARGB_8888;
+
+
+	if (lcdc_pipe == NULL) {
+		ptype = mdp4_overlay_format2type(format);
+		pipe = mdp4_overlay_pipe_alloc();
+		pipe->pipe_type = ptype;
+		/* use RGB1 pipe */
+		pipe->pipe_num  = OVERLAY_PIPE_RGB1;
+		pipe->mixer_stage  = MDP4_MIXER_STAGE_BASE;
+		pipe->mixer_num  = MDP4_MIXER0;
+		pipe->src_format = format;
+		mdp4_overlay_format2pipe(pipe);
+
+		lcdc_pipe = pipe; /* keep it */
+	} else {
+		pipe = lcdc_pipe;
+	}
+
+	pipe->src_height = fbi->var.yres;
+	pipe->src_width = fbi->var.xres;
+	pipe->src_h = fbi->var.yres;
+	pipe->src_w = fbi->var.xres;
+	pipe->src_y = 0;
+	pipe->src_x = 0;
+	pipe->srcp0_addr = (uint32) buf;
+	pipe->srcp0_ystride = fbi->fix.line_length;
+
+	mdp4_overlay_dmap_xy(pipe);
+	mdp4_overlay_dmap_cfg(mfd, 1);
+
+	mdp4_overlay_rgb_setup(pipe);
+
+	mdp4_mixer_stage_up(pipe);
+
+	mdp4_overlayproc_cfg(pipe);
+
+	/*
+	 * LCDC timing setting
+	 */
+	h_back_porch = var->left_margin;
+	h_front_porch = var->right_margin;
+	v_back_porch = var->upper_margin;
+	v_front_porch = var->lower_margin;
+	hsync_pulse_width = var->hsync_len;
+	vsync_pulse_width = var->vsync_len;
+	lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+	lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+	lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+	lcdc_width = mfd->panel_info.xres;
+	lcdc_height = mfd->panel_info.yres;
+	lcdc_bpp = mfd->panel_info.bpp;
+
+	hsync_period =
+	    hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+	hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+	hsync_start_x = hsync_pulse_width + h_back_porch;
+	hsync_end_x = hsync_period - h_front_porch - 1;
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+	vsync_period =
+	    (vsync_pulse_width + v_back_porch + lcdc_height +
+	     v_front_porch) * hsync_period;
+	display_v_start =
+	    (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+	display_v_end =
+	    vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+	if (lcdc_width != var->xres) {
+		active_h_start = hsync_start_x + first_pixel_start_x;
+		active_h_end = active_h_start + var->xres - 1;
+		active_hctl =
+		    ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+	} else {
+		active_hctl = 0;
+	}
+
+	if (lcdc_height != var->yres) {
+		active_v_start =
+		    display_v_start + first_pixel_start_y * hsync_period;
+		active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+		active_v_start |= ACTIVE_START_Y_EN;
+	} else {
+		active_v_start = 0;
+		active_v_end = 0;
+	}
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	hsync_polarity = 1;
+	vsync_polarity = 1;
+	lcdc_underflow_clr |= 0x80000000;	/* enable recovery */
+#else
+	hsync_polarity = 0;
+	vsync_polarity = 0;
+#endif
+	data_en_polarity = 0;
+
+	ctrl_polarity =
+	    (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x4, hsync_ctrl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x8, vsync_period);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0xc, vsync_pulse_width * hsync_period);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x10, display_hctl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x14, display_v_start);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x18, display_v_end);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x28, lcdc_border_clr);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x2c, lcdc_underflow_clr);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x30, lcdc_hsync_skew);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x38, ctrl_polarity);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x1c, active_hctl);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x20, active_v_start);
+	MDP_OUTP(MDP_BASE + LCDC_BASE + 0x24, active_v_end);
+
+	ret = panel_next_on(pdev);
+	if (ret == 0) {
+		/* enable LCDC block */
+		MDP_OUTP(MDP_BASE + LCDC_BASE, 1);
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	}
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mdp4_overlay_pipe *pipe;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + LCDC_BASE, 0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_off(pdev);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	/* dis-engage rgb0 from mixer */
+	pipe = lcdc_pipe;
+	mdp4_mixer_stage_down(pipe);
+
+	return ret;
+}
+
+/*
+ * mdp4_overlay0_done_lcdc: called from isr
+ */
+void mdp4_overlay0_done_lcdc()
+{
+	complete(&lcdc_pipe->comp);
+}
+
+void mdp4_lcdc_overlay(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+	struct mdp4_overlay_pipe *pipe;
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since it's lcdc mode */
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	mutex_lock(&mfd->dma->ov_mutex);
+
+	pipe = lcdc_pipe;
+	pipe->srcp0_addr = (uint32) buf;
+	mdp4_overlay_rgb_setup(pipe);
+	mdp4_overlay_reg_flush(pipe, 1); /* rgb1 and mixer0 */
+
+	/* enable irq */
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	INIT_COMPLETION(lcdc_pipe->comp);
+	mfd->dma->waiting = TRUE;
+	outp32(MDP_INTR_CLEAR, INTR_OVERLAY0_DONE);
+	mdp_intr_mask |= INTR_OVERLAY0_DONE;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+	wait_for_completion_killable(&lcdc_pipe->comp);
+	mdp_disable_irq(MDP_OVERLAY0_TERM);
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_overlay_mddi.c b/drivers/staging/msm/mdp4_overlay_mddi.c
new file mode 100644
index 0000000..be1b287
--- /dev/null
+++ b/drivers/staging/msm/mdp4_overlay_mddi.c
@@ -0,0 +1,254 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+static struct mdp4_overlay_pipe *mddi_pipe;
+static struct mdp4_overlay_pipe *pending_pipe;
+static struct msm_fb_data_type *mddi_mfd;
+
+#define WHOLESCREEN
+
+void mdp4_overlay_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	uint8 *src;
+	int bpp, ptype;
+	uint32 format;
+	uint32 mddi_ld_param;
+	uint16 mddi_vdo_packet_reg;
+	struct mdp4_overlay_pipe *pipe;
+
+	if (mfd->key != MFD_KEY)
+		return;
+
+	mddi_mfd = mfd;		/* keep it */
+
+	bpp = iBuf->bpp;
+
+	if (bpp == 2)
+		format = MDP_RGB_565;
+	else if (bpp == 3)
+		format = MDP_RGB_888;
+	else
+		format = MDP_ARGB_8888;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	if (mddi_pipe == NULL) {
+		ptype = mdp4_overlay_format2type(format);
+		pipe = mdp4_overlay_pipe_alloc();
+		pipe->pipe_type = ptype;
+		/* use RGB1 pipe */
+		pipe->pipe_num  = OVERLAY_PIPE_RGB1;
+		pipe->mixer_num  = MDP4_MIXER0;
+		pipe->src_format = format;
+		mdp4_overlay_format2pipe(pipe);
+
+		mddi_pipe = pipe; /* keep it */
+
+		mddi_ld_param = 0;
+		mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+		if (mfd->panel_info.type == MDDI_PANEL) {
+			if (mfd->panel_info.pdest == DISPLAY_1)
+				mddi_ld_param = 0;
+			else
+				mddi_ld_param = 1;
+		} else {
+			mddi_ld_param = 2;
+		}
+
+		MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+		MDP_OUTP(MDP_BASE + 0x00094,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+	} else {
+		pipe = mddi_pipe;
+	}
+
+
+	src = (uint8 *) iBuf->buf;
+
+#ifdef WHOLESCREEN
+	{
+		struct fb_info *fbi;
+
+		fbi = mfd->fbi;
+		pipe->src_height = fbi->var.yres;
+		pipe->src_width = fbi->var.xres;
+		pipe->src_h = fbi->var.yres;
+		pipe->src_w = fbi->var.xres;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = fbi->var.yres;
+		pipe->dst_w = fbi->var.xres;
+		pipe->dst_y = 0;
+		pipe->dst_x = 0;
+		pipe->srcp0_addr = (uint32)src;
+		pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+	}
+
+#else
+	if (mdp4_overlay_active(MDP4_MIXER0)) {
+		struct fb_info *fbi;
+
+		fbi = mfd->fbi;
+		pipe->src_height = fbi->var.yres;
+		pipe->src_width = fbi->var.xres;
+		pipe->src_h = fbi->var.yres;
+		pipe->src_w = fbi->var.xres;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = fbi->var.yres;
+		pipe->dst_w = fbi->var.xres;
+		pipe->dst_y = 0;
+		pipe->dst_x = 0;
+		pipe->srcp0_addr = (uint32) src;
+		pipe->srcp0_ystride = fbi->var.xres_virtual * bpp;
+	} else {
+		/* starting input address */
+		src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * bpp;
+
+		pipe->src_height = iBuf->dma_h;
+		pipe->src_width = iBuf->dma_w;
+		pipe->src_h = iBuf->dma_h;
+		pipe->src_w = iBuf->dma_w;
+		pipe->src_y = 0;
+		pipe->src_x = 0;
+		pipe->dst_h = iBuf->dma_h;
+		pipe->dst_w = iBuf->dma_w;
+		pipe->dst_y = iBuf->dma_y;
+		pipe->dst_x = iBuf->dma_x;
+		pipe->srcp0_addr = (uint32) src;
+		pipe->srcp0_ystride = iBuf->ibuf_width * bpp;
+	}
+#endif
+
+	pipe->mixer_stage  = MDP4_MIXER_STAGE_BASE;
+
+	mdp4_overlay_rgb_setup(pipe);
+
+	mdp4_mixer_stage_up(pipe);
+
+	mdp4_overlayproc_cfg(pipe);
+
+	mdp4_overlay_dmap_xy(pipe);
+
+	mdp4_overlay_dmap_cfg(mfd, 0);
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+}
+
+/*
+ * mdp4_overlay0_done_mddi: called from isr
+ */
+void mdp4_overlay0_done_mddi()
+{
+	if (pending_pipe)
+		complete(&pending_pipe->comp);
+}
+
+void mdp4_mddi_overlay_restore(void)
+{
+	/* mutex holded by caller */
+	mdp4_overlay_update_lcd(mddi_mfd);
+	mdp4_mddi_overlay_kickoff(mddi_mfd, mddi_pipe);
+}
+
+void mdp4_mddi_overlay_kickoff(struct msm_fb_data_type *mfd,
+				struct mdp4_overlay_pipe *pipe)
+{
+#ifdef MDP4_NONBLOCKING
+	unsigned long flag;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	if (mfd->dma->busy == TRUE) {
+		INIT_COMPLETION(pipe->comp);
+		pending_pipe = pipe;
+	}
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	if (pending_pipe != NULL) {
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&pipe->comp);
+		pending_pipe = NULL;
+	}
+	down(&mfd->sem);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	mfd->dma->busy = TRUE;
+	/* start OVERLAY pipe */
+	mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+	up(&mfd->sem);
+#else
+	down(&mfd->sem);
+	mdp_enable_irq(MDP_OVERLAY0_TERM);
+	mfd->dma->busy = TRUE;
+	INIT_COMPLETION(pipe->comp);
+	pending_pipe = pipe;
+
+	/* start OVERLAY pipe */
+	mdp_pipe_kickoff(MDP_OVERLAY0_TERM, mfd);
+	up(&mfd->sem);
+
+	/* wait until DMA finishes the current job */
+	wait_for_completion_killable(&pipe->comp);
+	mdp_disable_irq(MDP_OVERLAY0_TERM);
+#endif
+
+}
+
+void mdp4_mddi_overlay(struct msm_fb_data_type *mfd)
+{
+	mutex_lock(&mfd->dma->ov_mutex);
+
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		mdp4_overlay_update_lcd(mfd);
+
+		mdp4_mddi_overlay_kickoff(mfd, mddi_pipe);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+
+	mutex_unlock(&mfd->dma->ov_mutex);
+}
diff --git a/drivers/staging/msm/mdp4_util.c b/drivers/staging/msm/mdp4_util.c
new file mode 100644
index 0000000..fd97f52
--- /dev/null
+++ b/drivers/staging/msm/mdp4_util.c
@@ -0,0 +1,1686 @@
+
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/clk.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+void mdp4_sw_reset(ulong bits)
+{
+	bits &= 0x1f;	/* 5 bits */
+	outpdw(MDP_BASE + 0x001c, bits);	/* MDP_SW_RESET */
+
+	while (inpdw(MDP_BASE + 0x001c) & bits) /* self clear when complete */
+		;
+	MSM_FB_INFO("mdp4_sw_reset: 0x%x\n", (int)bits);
+}
+
+void mdp4_overlay_cfg(int overlayer, int blt_mode, int refresh, int direct_out)
+{
+	ulong bits = 0;
+
+	if (blt_mode)
+		bits |= (1 << 3);
+	refresh &= 0x03;	/* 2 bites */
+	bits |= (refresh << 1);
+	direct_out &= 0x01;
+	bits |= direct_out;
+
+	if (overlayer == MDP4_MIXER0)
+		outpdw(MDP_BASE + 0x10004, bits); /* MDP_OVERLAY0_CFG */
+	else
+		outpdw(MDP_BASE + 0x18004, bits); /* MDP_OVERLAY1_CFG */
+
+	MSM_FB_INFO("mdp4_overlay_cfg: 0x%x\n", (int)inpdw(MDP_BASE + 0x10004));
+}
+
+void mdp4_display_intf_sel(int output, ulong intf)
+{
+	ulong bits, mask;
+
+	bits = inpdw(MDP_BASE + 0x0038);	/* MDP_DISP_INTF_SEL */
+
+	mask = 0x03;	/* 2 bits */
+	intf &= 0x03;	/* 2 bits */
+
+	switch (output) {
+	case EXTERNAL_INTF_SEL:
+		intf <<= 4;
+		mask <<= 4;
+		break;
+	case SECONDARY_INTF_SEL:
+		intf &= 0x02;	/* only MDDI and EBI2 support */
+		intf <<= 2;
+		mask <<= 2;
+		break;
+	default:
+		break;
+	}
+
+
+	bits &= ~mask;
+	bits |= intf;
+
+	outpdw(MDP_BASE + 0x0038, bits);	/* MDP_DISP_INTF_SEL */
+
+  MSM_FB_INFO("mdp4_display_intf_sel: 0x%x\n", (int)inpdw(MDP_BASE + 0x0038));
+}
+
+unsigned long mdp4_display_status(void)
+{
+	return inpdw(MDP_BASE + 0x0018) & 0x3ff;	/* MDP_DISPLAY_STATUS */
+}
+
+void mdp4_ebi2_lcd_setup(int lcd, ulong base, int ystride)
+{
+	/* always use memory map */
+	ystride &= 0x01fff;	/* 13 bits */
+	if (lcd == EBI2_LCD0) {
+		outpdw(MDP_BASE + 0x0060, base);/* MDP_EBI2_LCD0 */
+		outpdw(MDP_BASE + 0x0068, ystride);/* MDP_EBI2_LCD0_YSTRIDE */
+	} else {
+		outpdw(MDP_BASE + 0x0064, base);/* MDP_EBI2_LCD1 */
+		outpdw(MDP_BASE + 0x006c, ystride);/* MDP_EBI2_LCD1_YSTRIDE */
+	}
+}
+
+void mdp4_mddi_setup(int mddi, unsigned long id)
+{
+	ulong 	bits;
+
+	if (mddi == MDDI_EXTERNAL_SET)
+		bits = 0x02;
+	else if (mddi == MDDI_SECONDARY_SET)
+		bits = 0x01;
+	else
+		bits = 0;	/* PRIMARY_SET */
+
+	id <<= 16;
+
+	bits |= id;
+
+	outpdw(MDP_BASE + 0x0090, bits); /* MDP_MDDI_PARAM_WR_SEL */
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file)
+{
+
+	/* not implemented yet */
+	return -1;
+}
+
+void mdp4_hw_init(void)
+{
+	ulong bits;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef MDP4_ERROR
+	/*
+	 * Issue software reset on DMA_P will casue DMA_P dma engine stall
+	 * on LCDC mode. However DMA_P does not stall at MDDI mode.
+	 * This need further investigation.
+	 */
+	mdp4_sw_reset(0x17);
+#endif
+
+	mdp4_clear_lcdc();
+
+	mdp4_mixer_blend_init(0);
+	mdp4_mixer_blend_init(1);
+	mdp4_vg_qseed_init(0);
+	mdp4_vg_qseed_init(1);
+	mdp4_vg_csc_mv_setup(0);
+	mdp4_vg_csc_mv_setup(1);
+	mdp4_vg_csc_pre_bv_setup(0);
+	mdp4_vg_csc_pre_bv_setup(1);
+	mdp4_vg_csc_post_bv_setup(0);
+	mdp4_vg_csc_post_bv_setup(1);
+	mdp4_vg_csc_pre_lv_setup(0);
+	mdp4_vg_csc_pre_lv_setup(1);
+	mdp4_vg_csc_post_lv_setup(0);
+	mdp4_vg_csc_post_lv_setup(1);
+
+	mdp4_mixer_gc_lut_setup(0);
+	mdp4_mixer_gc_lut_setup(1);
+
+	mdp4_vg_igc_lut_setup(0);
+	mdp4_vg_igc_lut_setup(1);
+
+	 mdp4_rgb_igc_lut_setup(0);
+	 mdp4_rgb_igc_lut_setup(1);
+
+	outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+
+	/* system interrupts */
+
+	bits =  mdp_intr_mask;
+	outpdw(MDP_BASE + 0x0050, bits);/* enable specififed interrupts */
+
+	/* histogram */
+	MDP_OUTP(MDP_BASE + 0x95010, 1);	/* auto clear HIST */
+
+	/* enable histogram interrupts */
+	outpdw(MDP_BASE + 0x9501c, INTR_HIST_DONE);
+
+	/* For the max read pending cmd config below, if the MDP clock     */
+	/* is less than the AXI clock, then we must use 3 pending          */
+	/* pending requests.  Otherwise, we should use 8 pending requests. */
+	/* In the future we should do this detection automatically.	   */
+
+	/* max read pending cmd config */
+	outpdw(MDP_BASE + 0x004c, 0x02222);	/* 3 pending requests */
+
+	/* dma_p fetch config */
+	outpdw(MDP_BASE + 0x91004, 0x27);	/* burst size of 8 */
+
+#ifndef CONFIG_FB_MSM_OVERLAY
+	/* both REFRESH_MODE and DIRECT_OUT are ignored at BLT mode */
+	mdp4_overlay_cfg(MDP4_MIXER0, OVERLAY_MODE_BLT, 0, 0);
+	mdp4_overlay_cfg(MDP4_MIXER1, OVERLAY_MODE_BLT, 0, 0);
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+
+void mdp4_clear_lcdc(void)
+{
+	uint32 bits;
+
+	bits = inpdw(MDP_BASE + 0xc0000);
+	if (bits & 0x01) /* enabled already */
+		return;
+
+	outpdw(MDP_BASE + 0xc0004, 0);	/* vsync ctrl out */
+	outpdw(MDP_BASE + 0xc0008, 0);	/* vsync period */
+	outpdw(MDP_BASE + 0xc000c, 0);	/* vsync pusle width */
+	outpdw(MDP_BASE + 0xc0010, 0);	/* lcdc display HCTL */
+	outpdw(MDP_BASE + 0xc0014, 0);	/* lcdc display v start */
+	outpdw(MDP_BASE + 0xc0018, 0);	/* lcdc display v end */
+	outpdw(MDP_BASE + 0xc001c, 0);	/* lcdc active hctl */
+	outpdw(MDP_BASE + 0xc0020, 0);	/* lcdc active v start */
+	outpdw(MDP_BASE + 0xc0024, 0);	/* lcdc active v end */
+	outpdw(MDP_BASE + 0xc0028, 0);	/* lcdc board color */
+	outpdw(MDP_BASE + 0xc002c, 0);	/* lcdc underflow ctrl */
+	outpdw(MDP_BASE + 0xc0030, 0);	/* lcdc hsync skew */
+	outpdw(MDP_BASE + 0xc0034, 0);	/* lcdc test ctl */
+	outpdw(MDP_BASE + 0xc0038, 0);	/* lcdc ctl polarity */
+}
+
+static struct mdp_dma_data overlay1_data;
+static int intr_dma_p;
+static int intr_dma_s;
+static int intr_dma_e;
+static int intr_overlay0;
+static int intr_overlay1;
+
+irqreturn_t mdp4_isr(int irq, void *ptr)
+{
+	uint32 isr, mask, lcdc;
+	struct mdp_dma_data *dma;
+
+	mdp_is_in_isr = TRUE;
+
+	while (1) {
+		isr = inpdw(MDP_INTR_STATUS);
+		if (isr == 0)
+			break;
+
+		mask = inpdw(MDP_INTR_ENABLE);
+		outpdw(MDP_INTR_CLEAR, isr);
+
+		isr &= mask;
+
+		if (unlikely(isr == 0))
+			break;
+
+		if (isr & INTR_DMA_P_DONE) {
+			intr_dma_p++;
+			lcdc = inpdw(MDP_BASE + 0xc0000);
+			dma = &dma2_data;
+			if (lcdc & 0x01) {	/* LCDC enable */
+				/* disable LCDC interrupt */
+				mdp_intr_mask &= ~INTR_DMA_P_DONE;
+				outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+				dma->waiting = FALSE;
+			} else {
+				dma->busy = FALSE;
+				mdp_pipe_ctrl(MDP_DMA2_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			}
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_S_DONE) {
+			intr_dma_s++;
+			dma = &dma_s_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_DMA_S_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_E_DONE) {
+			intr_dma_e++;
+			dma = &dma_e_data;
+			mdp_intr_mask &= ~INTR_DMA_E_DONE;
+			outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+			dma->busy = FALSE;
+
+			if (dma->waiting) {
+				dma->waiting = FALSE;
+				complete(&dma->comp);
+			}
+		}
+		if (isr & INTR_OVERLAY0_DONE) {
+			intr_overlay0++;
+			lcdc = inpdw(MDP_BASE + 0xc0000);
+			dma = &dma2_data;
+			if (lcdc & 0x01) {	/* LCDC enable */
+				/* disable LCDC interrupt */
+				mdp_intr_mask &= ~INTR_OVERLAY0_DONE;
+				outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+				dma->waiting = FALSE;
+				mdp4_overlay0_done_lcdc();
+			} else {	/* MDDI */
+				dma->busy = FALSE;
+#ifdef MDP4_NONBLOCKING
+				mdp_disable_irq_nolock(MDP_OVERLAY0_TERM);
+#endif
+				mdp_pipe_ctrl(MDP_OVERLAY0_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+				mdp4_overlay0_done_mddi();
+			}
+		}
+		if (isr & INTR_OVERLAY1_DONE) {
+			intr_overlay1++;
+			dma = &overlay1_data;
+			dma->busy = FALSE;
+			mdp_pipe_ctrl(MDP_OVERLAY1_BLOCK,
+					MDP_BLOCK_POWER_OFF, TRUE);
+			complete(&dma->comp);
+		}
+		if (isr & INTR_DMA_P_HISTOGRAM) {
+			isr = inpdw(MDP_DMA_P_HIST_INTR_STATUS);
+			mask = inpdw(MDP_DMA_P_HIST_INTR_ENABLE);
+			outpdw(MDP_DMA_P_HIST_INTR_CLEAR, isr);
+			isr &= mask;
+			if (isr & INTR_HIST_DONE) {
+				if (mdp_hist.r)
+					memcpy(mdp_hist.r, MDP_BASE + 0x95100,
+							mdp_hist.bin_cnt*4);
+				if (mdp_hist.g)
+					memcpy(mdp_hist.g, MDP_BASE + 0x95200,
+							mdp_hist.bin_cnt*4);
+				if (mdp_hist.b)
+					memcpy(mdp_hist.b, MDP_BASE + 0x95300,
+						mdp_hist.bin_cnt*4);
+				complete(&mdp_hist_comp);
+			}
+		}
+	}
+
+	mdp_is_in_isr = FALSE;
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * QSEED tables
+ */
+
+static uint32 vg_qseed_table0[] = {
+	0x5556aaff, 0x00000000, 0x00000000, 0x00000000
+};
+
+static uint32 vg_qseed_table1[] = {
+	0x76543210, 0xfedcba98
+};
+
+static uint32 vg_qseed_table2[] = {
+	0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+	0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+	0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+	0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+	0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+	0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+	0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+	0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+	0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+	0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+	0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+	0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+	0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+	0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+	0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+	0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+	0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+	0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+	0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+	0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+	0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+	0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+	0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+	0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+	0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+	0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+	0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+	0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+	0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+	0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+	0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+	0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+	0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+	0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+	0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+	0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+	0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+	0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+	0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+	0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+	0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+	0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+	0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+	0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+	0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+	0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+	0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+	0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+	0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+	0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+	0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+	0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+	0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+	0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+	0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+	0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+	0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+	0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+	0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+	0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+	0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+	0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+	0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+	0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+	0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+	0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+	0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+	0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+	0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+	0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+	0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+	0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+	0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+	0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+	0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+	0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+	0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+	0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+	0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+	0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+	0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+	0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+	0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+	0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+	0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+	0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+	0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+	0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+	0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+	0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+	0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+	0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+	0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+	0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+	0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+	0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+	0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+	0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+	0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+	0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+	0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+	0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+	0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+	0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+	0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+	0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+	0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+	0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+	0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+	0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+	0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+	0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+	0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+	0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+	0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+	0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+	0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+	0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+	0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+	0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+	0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+	0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+	0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+	0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+	0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+	0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+	0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+	0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+	0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+	0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+	0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+	0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+	0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+	0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+	0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+	0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+	0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+	0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+	0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+	0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+	0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+	0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+	0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+	0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+	0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+	0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+	0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+	0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+	0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+	0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+	0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+	0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+	0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+	0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+	0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+	0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+	0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+	0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+	0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+	0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+	0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+	0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+	0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+	0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+	0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+	0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+	0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+	0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+	0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+	0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+	0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+	0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+	0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+	0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+	0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+	0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+	0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+	0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+	0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+	0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+	0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+	0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+	0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+	0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+	0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+	0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+	0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+	0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+	0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+	0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+	0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+	0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+	0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+	0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+	0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+	0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+	0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+	0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+	0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+	0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+	0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+	0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+	0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+	0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+	0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+	0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+	0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+	0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+	0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+	0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+	0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+	0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+	0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+	0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+	0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+	0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+	0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+	0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+	0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+	0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+	0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+	0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+	0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+	0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+	0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+	0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+	0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+	0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+	0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+	0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+	0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+	0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+	0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+	0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+	0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+	0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+	0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+	0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+	0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+	0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+	0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+	0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+	0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+	0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+	0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+	0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+	0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+	0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+	0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+	0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+	0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+	0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+	0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+	0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+	0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+	0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff,
+	0x02000000, 0x00000000, 0x02060ff2, 0x00000008,
+	0x02090fe4, 0x00000013, 0x020a0fd9, 0x0ffc0021,
+	0x02080fce, 0x0ffa0030, 0x02030fc5, 0x0ff60042,
+	0x01fd0fbe, 0x0ff10054, 0x01f50fb6, 0x0fed0068,
+	0x01e90fb1, 0x0fe60080, 0x01dc0fae, 0x0fe10095,
+	0x01ca0fae, 0x0fda00ae, 0x01b70fad, 0x0fd600c6,
+	0x01a40fad, 0x0fcf00e0, 0x018f0faf, 0x0fc800fa,
+	0x01780fb1, 0x0fc30114, 0x015f0fb5, 0x0fbf012d,
+	0x01490fb7, 0x0fb70149, 0x012d0fbf, 0x0fb5015f,
+	0x01140fc3, 0x0fb10178, 0x00fa0fc8, 0x0faf018f,
+	0x00e00fcf, 0x0fad01a4, 0x00c60fd6, 0x0fad01b7,
+	0x00ae0fda, 0x0fae01ca, 0x00950fe1, 0x0fae01dc,
+	0x00800fe6, 0x0fb101e9, 0x00680fed, 0x0fb601f5,
+	0x00540ff1, 0x0fbe01fd, 0x00420ff6, 0x0fc50203,
+	0x00300ffa, 0x0fce0208, 0x00210ffc, 0x0fd9020a,
+	0x00130000, 0x0fe40209, 0x00080000, 0x0ff20206,
+	0x02000000, 0x00000000, 0x02040ff2, 0x0000000a,
+	0x02040fe4, 0x00000018, 0x02010fda, 0x0ffc0029,
+	0x01fc0fcf, 0x0ffa003b, 0x01f30fc7, 0x0ff60050,
+	0x01e90fc0, 0x0ff20065, 0x01dc0fba, 0x0fee007c,
+	0x01cc0fb6, 0x0fe80096, 0x01ba0fb4, 0x0fe400ae,
+	0x01a70fb4, 0x0fdd00c8, 0x018f0fb5, 0x0fda00e2,
+	0x017a0fb5, 0x0fd400fd, 0x01630fb8, 0x0fce0117,
+	0x014c0fba, 0x0fca0130, 0x01320fbf, 0x0fc70148,
+	0x011b0fc1, 0x0fc10163, 0x01010fc8, 0x0fc00177,
+	0x00e90fcd, 0x0fbd018d, 0x00d10fd1, 0x0fbc01a2,
+	0x00ba0fd7, 0x0fbb01b4, 0x00a30fdd, 0x0fbc01c4,
+	0x008e0fe1, 0x0fbd01d4, 0x00790fe7, 0x0fbe01e2,
+	0x00670feb, 0x0fc001ee, 0x00540ff1, 0x0fc501f6,
+	0x00430ff4, 0x0fcb01fe, 0x00340ff8, 0x0fd10203,
+	0x00260ffb, 0x0fd80207, 0x001a0ffd, 0x0fe10208,
+	0x000f0000, 0x0fea0207, 0x00060000, 0x0ff50205,
+	0x02000000, 0x00000000, 0x02020ff2, 0x0000000c,
+	0x02000fe4, 0x0000001c, 0x01fa0fda, 0x0ffc0030,
+	0x01f10fd0, 0x0ffa0045, 0x01e50fc8, 0x0ff6005d,
+	0x01d60fc3, 0x0ff30074, 0x01c60fbd, 0x0fef008e,
+	0x01b30fba, 0x0fe900aa, 0x019e0fb9, 0x0fe500c4,
+	0x01870fba, 0x0fe000df, 0x016f0fbb, 0x0fdd00f9,
+	0x01580fbc, 0x0fd80114, 0x01400fbf, 0x0fd3012e,
+	0x01280fc2, 0x0fd00146, 0x010f0fc6, 0x0fce015d,
+	0x00f90fc9, 0x0fc90175, 0x00e00fcf, 0x0fc90188,
+	0x00ca0fd4, 0x0fc6019c, 0x00b40fd8, 0x0fc601ae,
+	0x009f0fdd, 0x0fc501bf, 0x008b0fe3, 0x0fc601cc,
+	0x00780fe6, 0x0fc701db, 0x00660feb, 0x0fc801e7,
+	0x00560fef, 0x0fcb01f0, 0x00460ff3, 0x0fcf01f8,
+	0x00380ff6, 0x0fd401fe, 0x002c0ff9, 0x0fd90202,
+	0x00200ffc, 0x0fdf0205, 0x00160ffe, 0x0fe60206,
+	0x000c0000, 0x0fed0207, 0x00050000, 0x0ff70204,
+	0x02000000, 0x00000000, 0x01fe0ff3, 0x0000000f,
+	0x01f60fe5, 0x00000025, 0x01ea0fdb, 0x0ffd003e,
+	0x01db0fd2, 0x0ffb0058, 0x01c80fcc, 0x0ff70075,
+	0x01b50fc7, 0x0ff40090, 0x01a00fc3, 0x0ff000ad,
+	0x01880fc1, 0x0feb00cc, 0x01700fc1, 0x0fe800e7,
+	0x01550fc3, 0x0fe40104, 0x013b0fc5, 0x0fe2011e,
+	0x01240fc6, 0x0fde0138, 0x010c0fca, 0x0fda0150,
+	0x00f40fcd, 0x0fd90166, 0x00dd0fd1, 0x0fd7017b,
+	0x00c80fd4, 0x0fd40190, 0x00b20fd9, 0x0fd401a1,
+	0x009f0fdd, 0x0fd301b1, 0x008c0fe1, 0x0fd301c0,
+	0x007b0fe5, 0x0fd301cd, 0x006a0fea, 0x0fd401d8,
+	0x005c0fec, 0x0fd501e3, 0x004d0ff0, 0x0fd601ed,
+	0x00410ff3, 0x0fd801f4, 0x00340ff7, 0x0fdb01fa,
+	0x002a0ff9, 0x0fdf01fe, 0x00200ffb, 0x0fe30202,
+	0x00180ffd, 0x0fe70204, 0x00100ffe, 0x0fed0205,
+	0x00090000, 0x0ff20205, 0x00040000, 0x0ff90203,
+	0x02000000, 0x00000000, 0x02050ff5, 0x00000006,
+	0x02070fea, 0x0000000f, 0x02080fe1, 0x0ffd001a,
+	0x02070fd8, 0x0ffb0026, 0x02030fd1, 0x0ff80034,
+	0x01fe0fcb, 0x0ff40043, 0x01f60fc5, 0x0ff10054,
+	0x01ee0fc0, 0x0feb0067, 0x01e20fbe, 0x0fe70079,
+	0x01d40fbd, 0x0fe1008e, 0x01c40fbc, 0x0fdd00a3,
+	0x01b40fbb, 0x0fd700ba, 0x01a20fbc, 0x0fd100d1,
+	0x018d0fbd, 0x0fcd00e9, 0x01770fc0, 0x0fc80101,
+	0x01630fc1, 0x0fc1011b, 0x01480fc7, 0x0fbf0132,
+	0x01300fca, 0x0fba014c, 0x01170fce, 0x0fb80163,
+	0x00fd0fd4, 0x0fb5017a, 0x00e20fda, 0x0fb5018f,
+	0x00c80fdd, 0x0fb401a7, 0x00ae0fe4, 0x0fb401ba,
+	0x00960fe8, 0x0fb601cc, 0x007c0fee, 0x0fba01dc,
+	0x00650ff2, 0x0fc001e9, 0x00500ff6, 0x0fc701f3,
+	0x003b0ffa, 0x0fcf01fc, 0x00290ffc, 0x0fda0201,
+	0x00180000, 0x0fe40204, 0x000a0000, 0x0ff20204,
+	0x02000000, 0x00000000, 0x02030ff5, 0x00000008,
+	0x02030fea, 0x00000013, 0x02020fe1, 0x0ffd0020,
+	0x01fc0fd9, 0x0ffc002f, 0x01f60fd2, 0x0ff80040,
+	0x01ed0fcd, 0x0ff50051, 0x01e30fc7, 0x0ff10065,
+	0x01d70fc3, 0x0fec007a, 0x01c60fc2, 0x0fe9008f,
+	0x01b60fc1, 0x0fe300a6, 0x01a20fc1, 0x0fe000bd,
+	0x018f0fc1, 0x0fdb00d5, 0x017b0fc2, 0x0fd500ee,
+	0x01640fc4, 0x0fd20106, 0x014d0fc8, 0x0fce011d,
+	0x01370fc9, 0x0fc90137, 0x011d0fce, 0x0fc8014d,
+	0x01060fd2, 0x0fc40164, 0x00ee0fd5, 0x0fc2017b,
+	0x00d50fdb, 0x0fc1018f, 0x00bd0fe0, 0x0fc101a2,
+	0x00a60fe3, 0x0fc101b6, 0x008f0fe9, 0x0fc201c6,
+	0x007a0fec, 0x0fc301d7, 0x00650ff1, 0x0fc701e3,
+	0x00510ff5, 0x0fcd01ed, 0x00400ff8, 0x0fd201f6,
+	0x002f0ffc, 0x0fd901fc, 0x00200ffd, 0x0fe10202,
+	0x00130000, 0x0fea0203, 0x00080000, 0x0ff50203,
+	0x02000000, 0x00000000, 0x02020ff5, 0x00000009,
+	0x01ff0fea, 0x00000017, 0x01fb0fe2, 0x0ffd0026,
+	0x01f30fda, 0x0ffc0037, 0x01ea0fd3, 0x0ff8004b,
+	0x01df0fce, 0x0ff5005e, 0x01d10fc9, 0x0ff20074,
+	0x01c10fc6, 0x0fed008c, 0x01ae0fc5, 0x0fea00a3,
+	0x019b0fc5, 0x0fe500bb, 0x01850fc6, 0x0fe200d3,
+	0x01700fc6, 0x0fde00ec, 0x015a0fc8, 0x0fd90105,
+	0x01430fca, 0x0fd6011d, 0x012b0fcd, 0x0fd30135,
+	0x01150fcf, 0x0fcf014d, 0x00fc0fd4, 0x0fce0162,
+	0x00e50fd8, 0x0fcc0177, 0x00cf0fdb, 0x0fca018c,
+	0x00b80fe0, 0x0fc9019f, 0x00a20fe5, 0x0fca01af,
+	0x008e0fe8, 0x0fcb01bf, 0x00790fec, 0x0fcb01d0,
+	0x00670fef, 0x0fcd01dd, 0x00550ff4, 0x0fd001e7,
+	0x00440ff7, 0x0fd501f0, 0x00350ffa, 0x0fda01f7,
+	0x00270ffc, 0x0fdf01fe, 0x001b0ffe, 0x0fe70200,
+	0x00100000, 0x0fee0202, 0x00060000, 0x0ff70203,
+	0x02000000, 0x00000000, 0x01ff0ff5, 0x0000000c,
+	0x01f80fea, 0x0000001e, 0x01ef0fe2, 0x0ffd0032,
+	0x01e20fdb, 0x0ffc0047, 0x01d30fd5, 0x0ff9005f,
+	0x01c20fd1, 0x0ff60077, 0x01b00fcd, 0x0ff30090,
+	0x019b0fcb, 0x0fef00ab, 0x01850fcb, 0x0fec00c4,
+	0x016e0fcc, 0x0fe800de, 0x01550fcd, 0x0fe600f8,
+	0x013f0fce, 0x0fe20111, 0x01280fd0, 0x0fdf0129,
+	0x01110fd2, 0x0fdd0140, 0x00f90fd6, 0x0fdb0156,
+	0x00e40fd8, 0x0fd8016c, 0x00cd0fdd, 0x0fd8017e,
+	0x00b80fe0, 0x0fd60192, 0x00a40fe3, 0x0fd601a3,
+	0x00910fe7, 0x0fd501b3, 0x007f0feb, 0x0fd601c0,
+	0x006e0fed, 0x0fd701ce, 0x005d0ff1, 0x0fd701db,
+	0x004f0ff3, 0x0fd901e5, 0x00400ff7, 0x0fdc01ed,
+	0x00330ff9, 0x0fe001f4, 0x00280ffb, 0x0fe301fa,
+	0x001d0ffd, 0x0fe801fe, 0x00140ffe, 0x0fed0201,
+	0x000c0000, 0x0ff20202, 0x00050000, 0x0ff90202,
+	0x02000000, 0x00000000, 0x02040ff7, 0x00000005,
+	0x02070fed, 0x0000000c, 0x02060fe6, 0x0ffe0016,
+	0x02050fdf, 0x0ffc0020, 0x02020fd9, 0x0ff9002c,
+	0x01fe0fd4, 0x0ff60038, 0x01f80fcf, 0x0ff30046,
+	0x01f00fcb, 0x0fef0056, 0x01e70fc8, 0x0feb0066,
+	0x01db0fc7, 0x0fe60078, 0x01cc0fc6, 0x0fe3008b,
+	0x01bf0fc5, 0x0fdd009f, 0x01ae0fc6, 0x0fd800b4,
+	0x019c0fc6, 0x0fd400ca, 0x01880fc9, 0x0fcf00e0,
+	0x01750fc9, 0x0fc900f9, 0x015d0fce, 0x0fc6010f,
+	0x01460fd0, 0x0fc20128, 0x012e0fd3, 0x0fbf0140,
+	0x01140fd8, 0x0fbc0158, 0x00f90fdd, 0x0fbb016f,
+	0x00df0fe0, 0x0fba0187, 0x00c40fe5, 0x0fb9019e,
+	0x00aa0fe9, 0x0fba01b3, 0x008e0fef, 0x0fbd01c6,
+	0x00740ff3, 0x0fc301d6, 0x005d0ff6, 0x0fc801e5,
+	0x00450ffa, 0x0fd001f1, 0x00300ffc, 0x0fda01fa,
+	0x001c0000, 0x0fe40200, 0x000c0000, 0x0ff20202,
+	0x02000000, 0x00000000, 0x02030ff7, 0x00000006,
+	0x02020fee, 0x00000010, 0x02000fe7, 0x0ffe001b,
+	0x01fe0fdf, 0x0ffc0027, 0x01f70fda, 0x0ffa0035,
+	0x01f00fd5, 0x0ff70044, 0x01e70fd0, 0x0ff40055,
+	0x01dd0fcd, 0x0fef0067, 0x01d00fcb, 0x0fec0079,
+	0x01bf0fcb, 0x0fe8008e, 0x01af0fca, 0x0fe500a2,
+	0x019f0fc9, 0x0fe000b8, 0x018c0fca, 0x0fdb00cf,
+	0x01770fcc, 0x0fd800e5, 0x01620fce, 0x0fd400fc,
+	0x014d0fcf, 0x0fcf0115, 0x01350fd3, 0x0fcd012b,
+	0x011d0fd6, 0x0fca0143, 0x01050fd9, 0x0fc8015a,
+	0x00ec0fde, 0x0fc60170, 0x00d30fe2, 0x0fc60185,
+	0x00bb0fe5, 0x0fc5019b, 0x00a30fea, 0x0fc501ae,
+	0x008c0fed, 0x0fc601c1, 0x00740ff2, 0x0fc901d1,
+	0x005e0ff5, 0x0fce01df, 0x004b0ff8, 0x0fd301ea,
+	0x00370ffc, 0x0fda01f3, 0x00260ffd, 0x0fe201fb,
+	0x00170000, 0x0fea01ff, 0x00090000, 0x0ff50202,
+	0x02000000, 0x00000000, 0x02010ff7, 0x00000008,
+	0x01ff0fee, 0x00000013, 0x01fb0fe7, 0x0ffe0020,
+	0x01f60fe0, 0x0ffc002e, 0x01ed0fda, 0x0ffa003f,
+	0x01e40fd6, 0x0ff7004f, 0x01d80fd2, 0x0ff40062,
+	0x01ca0fcf, 0x0ff00077, 0x01bb0fcd, 0x0fed008b,
+	0x01a90fcd, 0x0fe900a1, 0x01960fcd, 0x0fe600b7,
+	0x01830fcd, 0x0fe200ce, 0x016d0fcf, 0x0fde00e6,
+	0x01580fd0, 0x0fdb00fd, 0x01410fd3, 0x0fd80114,
+	0x012c0fd4, 0x0fd4012c, 0x01140fd8, 0x0fd30141,
+	0x00fd0fdb, 0x0fd00158, 0x00e60fde, 0x0fcf016d,
+	0x00ce0fe2, 0x0fcd0183, 0x00b70fe6, 0x0fcd0196,
+	0x00a10fe9, 0x0fcd01a9, 0x008b0fed, 0x0fcd01bb,
+	0x00770ff0, 0x0fcf01ca, 0x00620ff4, 0x0fd201d8,
+	0x004f0ff7, 0x0fd601e4, 0x003f0ffa, 0x0fda01ed,
+	0x002e0ffc, 0x0fe001f6, 0x00200ffe, 0x0fe701fb,
+	0x00130000, 0x0fee01ff, 0x00080000, 0x0ff70201,
+	0x02000000, 0x00000000, 0x01ff0ff7, 0x0000000a,
+	0x01f90fee, 0x00000019, 0x01f10fe7, 0x0ffe002a,
+	0x01e60fe1, 0x0ffd003c, 0x01d90fdc, 0x0ffa0051,
+	0x01cc0fd8, 0x0ff70065, 0x01bb0fd5, 0x0ff5007b,
+	0x01a80fd3, 0x0ff10094, 0x01950fd2, 0x0fef00aa,
+	0x01800fd2, 0x0feb00c3, 0x016a0fd3, 0x0fe900da,
+	0x01540fd3, 0x0fe600f3, 0x013f0fd5, 0x0fe2010a,
+	0x01280fd7, 0x0fe00121, 0x01100fda, 0x0fde0138,
+	0x00fb0fdb, 0x0fdb014f, 0x00e40fdf, 0x0fdb0162,
+	0x00ce0fe2, 0x0fd90177, 0x00b90fe4, 0x0fd8018b,
+	0x00a50fe8, 0x0fd8019b, 0x00910fec, 0x0fd801ab,
+	0x007e0fee, 0x0fd801bc, 0x006c0ff2, 0x0fd901c9,
+	0x005c0ff4, 0x0fda01d6, 0x004b0ff7, 0x0fdd01e1,
+	0x003c0ff9, 0x0fe001eb, 0x002f0ffb, 0x0fe401f2,
+	0x00230ffd, 0x0fe801f8, 0x00180ffe, 0x0fed01fd,
+	0x000e0000, 0x0ff20200, 0x00060000, 0x0ff90201,
+	0x02000000, 0x00000000, 0x02030ff9, 0x00000004,
+	0x02050ff2, 0x00000009, 0x02050fed, 0x0ffe0010,
+	0x02040fe7, 0x0ffd0018, 0x02020fe3, 0x0ffb0020,
+	0x01fe0fdf, 0x0ff9002a, 0x01fa0fdb, 0x0ff70034,
+	0x01f40fd8, 0x0ff30041, 0x01ed0fd6, 0x0ff0004d,
+	0x01e30fd5, 0x0fec005c, 0x01d80fd4, 0x0fea006a,
+	0x01cd0fd3, 0x0fe5007b, 0x01c00fd3, 0x0fe1008c,
+	0x01b10fd3, 0x0fdd009f, 0x01a10fd4, 0x0fd900b2,
+	0x01900fd4, 0x0fd400c8, 0x017b0fd7, 0x0fd100dd,
+	0x01660fd9, 0x0fcd00f4, 0x01500fda, 0x0fca010c,
+	0x01380fde, 0x0fc60124, 0x011e0fe2, 0x0fc5013b,
+	0x01040fe4, 0x0fc30155, 0x00e70fe8, 0x0fc10170,
+	0x00cc0feb, 0x0fc10188, 0x00ad0ff0, 0x0fc301a0,
+	0x00900ff4, 0x0fc701b5, 0x00750ff7, 0x0fcc01c8,
+	0x00580ffb, 0x0fd201db, 0x003e0ffd, 0x0fdb01ea,
+	0x00250000, 0x0fe501f6, 0x000f0000, 0x0ff301fe,
+	0x02000000, 0x00000000, 0x02020ff9, 0x00000005,
+	0x02020ff2, 0x0000000c, 0x02010fed, 0x0ffe0014,
+	0x01fe0fe8, 0x0ffd001d, 0x01fa0fe3, 0x0ffb0028,
+	0x01f40fe0, 0x0ff90033, 0x01ed0fdc, 0x0ff70040,
+	0x01e50fd9, 0x0ff3004f, 0x01db0fd7, 0x0ff1005d,
+	0x01ce0fd7, 0x0fed006e, 0x01c00fd6, 0x0feb007f,
+	0x01b30fd5, 0x0fe70091, 0x01a30fd6, 0x0fe300a4,
+	0x01920fd6, 0x0fe000b8, 0x017e0fd8, 0x0fdd00cd,
+	0x016c0fd8, 0x0fd800e4, 0x01560fdb, 0x0fd600f9,
+	0x01400fdd, 0x0fd20111, 0x01290fdf, 0x0fd00128,
+	0x01110fe2, 0x0fce013f, 0x00f80fe6, 0x0fcd0155,
+	0x00de0fe8, 0x0fcc016e, 0x00c40fec, 0x0fcb0185,
+	0x00ab0fef, 0x0fcb019b, 0x00900ff3, 0x0fcd01b0,
+	0x00770ff6, 0x0fd101c2, 0x005f0ff9, 0x0fd501d3,
+	0x00470ffc, 0x0fdb01e2, 0x00320ffd, 0x0fe201ef,
+	0x001e0000, 0x0fea01f8, 0x000c0000, 0x0ff501ff,
+	0x02000000, 0x00000000, 0x02010ff9, 0x00000006,
+	0x02000ff2, 0x0000000e, 0x01fd0fed, 0x0ffe0018,
+	0x01f80fe8, 0x0ffd0023, 0x01f20fe4, 0x0ffb002f,
+	0x01eb0fe0, 0x0ff9003c, 0x01e10fdd, 0x0ff7004b,
+	0x01d60fda, 0x0ff4005c, 0x01c90fd9, 0x0ff2006c,
+	0x01bc0fd8, 0x0fee007e, 0x01ab0fd8, 0x0fec0091,
+	0x019b0fd8, 0x0fe800a5, 0x018b0fd8, 0x0fe400b9,
+	0x01770fd9, 0x0fe200ce, 0x01620fdb, 0x0fdf00e4,
+	0x014f0fdb, 0x0fdb00fb, 0x01380fde, 0x0fda0110,
+	0x01210fe0, 0x0fd70128, 0x010a0fe2, 0x0fd5013f,
+	0x00f30fe6, 0x0fd30154, 0x00da0fe9, 0x0fd3016a,
+	0x00c30feb, 0x0fd20180, 0x00aa0fef, 0x0fd20195,
+	0x00940ff1, 0x0fd301a8, 0x007b0ff5, 0x0fd501bb,
+	0x00650ff7, 0x0fd801cc, 0x00510ffa, 0x0fdc01d9,
+	0x003c0ffd, 0x0fe101e6, 0x002a0ffe, 0x0fe701f1,
+	0x00190000, 0x0fee01f9, 0x000a0000, 0x0ff701ff,
+	0x02000000, 0x00000000, 0x01ff0ff9, 0x00000008,
+	0x01fb0ff2, 0x00000013, 0x01f50fed, 0x0ffe0020,
+	0x01ed0fe8, 0x0ffd002e, 0x01e30fe4, 0x0ffb003e,
+	0x01d80fe1, 0x0ff9004e, 0x01cb0fde, 0x0ff70060,
+	0x01bc0fdc, 0x0ff40074, 0x01ac0fdb, 0x0ff20087,
+	0x019a0fdb, 0x0fef009c, 0x01870fdb, 0x0fed00b1,
+	0x01740fdb, 0x0fea00c7, 0x01600fdc, 0x0fe700dd,
+	0x014b0fdd, 0x0fe500f3, 0x01350fdf, 0x0fe30109,
+	0x01200fe0, 0x0fe00120, 0x01090fe3, 0x0fdf0135,
+	0x00f30fe5, 0x0fdd014b, 0x00dd0fe7, 0x0fdc0160,
+	0x00c70fea, 0x0fdb0174, 0x00b10fed, 0x0fdb0187,
+	0x009c0fef, 0x0fdb019a, 0x00870ff2, 0x0fdb01ac,
+	0x00740ff4, 0x0fdc01bc, 0x00600ff7, 0x0fde01cb,
+	0x004e0ff9, 0x0fe101d8, 0x003e0ffb, 0x0fe401e3,
+	0x002e0ffd, 0x0fe801ed, 0x00200ffe, 0x0fed01f5,
+	0x00130000, 0x0ff201fb, 0x00080000, 0x0ff901ff
+};
+
+
+#define MDP4_QSEED_TABLE0_OFF 0x8100
+#define MDP4_QSEED_TABLE1_OFF 0x8200
+#define MDP4_QSEED_TABLE2_OFF 0x9000
+
+void mdp4_vg_qseed_init(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE0_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table0) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table0[i]);
+		off++;
+	}
+
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE1_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table1) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table1[i]);
+		off++;
+	}
+
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+						MDP4_QSEED_TABLE2_OFF);
+	for (i = 0; i < (sizeof(vg_qseed_table2) / sizeof(uint32)); i++) {
+		outpdw(off, vg_qseed_table2[i]);
+		off++;
+	}
+
+}
+
+void mdp4_mixer_blend_init(mixer_num)
+{
+	unsigned char *overlay_base;
+	int off;
+
+	if (mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		overlay_base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	/* stage 0 to stage 2 */
+	off = 0;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+	off += 0x20;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+
+	off += 0x20;
+	outpdw(overlay_base + off + 0x104, 0x010);
+	outpdw(overlay_base + off + 0x108, 0xff);/* FG */
+	outpdw(overlay_base + off + 0x10c, 0x00);/* BG */
+}
+
+
+static uint32 csc_matrix_tab[9] = {
+	0x0254, 0x0000, 0x0331,
+	0x0254, 0xff37, 0xfe60,
+	0x0254, 0x0409, 0x0000
+};
+
+static uint32 csc_pre_bv_tab[3] = {0xfff0, 0xff80, 0xff80 };
+static uint32 csc_post_bv_tab[3] = {0, 0, 0 };
+
+static  uint32 csc_pre_lv_tab[6] =  {0, 0xff, 0, 0xff, 0, 0xff };
+static  uint32 csc_post_lv_tab[6] = {0, 0xff, 0, 0xff, 0, 0xff };
+
+#define MDP4_CSC_MV_OFF 	0x4400
+#define MDP4_CSC_PRE_BV_OFF 	0x4500
+#define MDP4_CSC_POST_BV_OFF 	0x4580
+#define MDP4_CSC_PRE_LV_OFF 	0x4600
+#define MDP4_CSC_POST_LV_OFF 	0x4680
+
+void mdp4_vg_csc_mv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_MV_OFF);
+	for (i = 0; i < 9; i++) {
+		outpdw(off, csc_matrix_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_pre_bv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_PRE_BV_OFF);
+	for (i = 0; i < 3; i++) {
+		outpdw(off, csc_pre_bv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_post_bv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_POST_BV_OFF);
+	for (i = 0; i < 3; i++) {
+		outpdw(off, csc_post_bv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_pre_lv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_PRE_LV_OFF);
+
+	for (i = 0; i < 6; i++) {
+		outpdw(off, csc_pre_lv_tab[i]);
+		off++;
+	}
+}
+
+void mdp4_vg_csc_post_lv_setup(int vp_num)
+{
+	uint32 *off;
+	int i, voff;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	off = (uint32 *)(MDP_BASE + MDP4_VIDEO_BASE + voff +
+					MDP4_CSC_POST_LV_OFF);
+
+	for (i = 0; i < 6; i++) {
+		outpdw(off, csc_post_lv_tab[i]);
+		off++;
+	}
+}
+
+char gc_lut[] = {
+	0x0, 0x1, 0x2, 0x2, 0x3, 0x4, 0x5, 0x6,
+	0x6, 0x7, 0x8, 0x9, 0xA, 0xA, 0xB, 0xC,
+	0xD, 0xD, 0xE, 0xF, 0xF, 0x10, 0x10, 0x11,
+	0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x15, 0x15,
+	0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x18, 0x19,
+	0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B, 0x1B, 0x1C,
+	0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F,
+	0x1F, 0x1F, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21,
+	0x22, 0x22, 0x22, 0x22, 0x23, 0x23, 0x23, 0x24,
+	0x24, 0x24, 0x25, 0x25, 0x25, 0x25, 0x26, 0x26,
+	0x26, 0x26, 0x27, 0x27, 0x27, 0x28, 0x28, 0x28,
+	0x28, 0x29, 0x29, 0x29, 0x29, 0x2A, 0x2A, 0x2A,
+	0x2A, 0x2B, 0x2B, 0x2B, 0x2B, 0x2B, 0x2C, 0x2C,
+	0x2C, 0x2C, 0x2D, 0x2D, 0x2D, 0x2D, 0x2E, 0x2E,
+	0x2E, 0x2E, 0x2E, 0x2F, 0x2F, 0x2F, 0x2F, 0x30,
+	0x30, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x31,
+	0x31, 0x32, 0x32, 0x32, 0x32, 0x32, 0x33, 0x33,
+	0x33, 0x33, 0x33, 0x34, 0x34, 0x34, 0x34, 0x34,
+	0x35, 0x35, 0x35, 0x35, 0x35, 0x36, 0x36, 0x36,
+	0x36, 0x36, 0x37, 0x37, 0x37, 0x37, 0x37, 0x37,
+	0x38, 0x38, 0x38, 0x38, 0x38, 0x39, 0x39, 0x39,
+	0x39, 0x39, 0x39, 0x3A, 0x3A, 0x3A, 0x3A, 0x3A,
+	0x3A, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3C,
+	0x3C, 0x3C, 0x3C, 0x3C, 0x3C, 0x3D, 0x3D, 0x3D,
+	0x3D, 0x3D, 0x3D, 0x3E, 0x3E, 0x3E, 0x3E, 0x3E,
+	0x3E, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x40,
+	0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41,
+	0x41, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x42,
+	0x42, 0x42, 0x42, 0x43, 0x43, 0x43, 0x43, 0x43,
+	0x43, 0x43, 0x44, 0x44, 0x44, 0x44, 0x44, 0x44,
+	0x44, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45, 0x45,
+	0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x46, 0x47,
+	0x47, 0x47, 0x47, 0x47, 0x47, 0x47, 0x48, 0x48,
+	0x48, 0x48, 0x48, 0x48, 0x48, 0x48, 0x49, 0x49,
+	0x49, 0x49, 0x49, 0x49, 0x49, 0x4A, 0x4A, 0x4A,
+	0x4A, 0x4A, 0x4A, 0x4A, 0x4A, 0x4B, 0x4B, 0x4B,
+	0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4C, 0x4C, 0x4C,
+	0x4C, 0x4C, 0x4C, 0x4C, 0x4D, 0x4D, 0x4D, 0x4D,
+	0x4D, 0x4D, 0x4D, 0x4D, 0x4E, 0x4E, 0x4E, 0x4E,
+	0x4E, 0x4E, 0x4E, 0x4E, 0x4E, 0x4F, 0x4F, 0x4F,
+	0x4F, 0x4F, 0x4F, 0x4F, 0x4F, 0x50, 0x50, 0x50,
+	0x50, 0x50, 0x50, 0x50, 0x50, 0x51, 0x51, 0x51,
+	0x51, 0x51, 0x51, 0x51, 0x51, 0x51, 0x52, 0x52,
+	0x52, 0x52, 0x52, 0x52, 0x52, 0x52, 0x53, 0x53,
+	0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x53, 0x54,
+	0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54, 0x54,
+	0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55,
+	0x55, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56, 0x56,
+	0x56, 0x56, 0x57, 0x57, 0x57, 0x57, 0x57, 0x57,
+	0x57, 0x57, 0x57, 0x58, 0x58, 0x58, 0x58, 0x58,
+	0x58, 0x58, 0x58, 0x58, 0x58, 0x59, 0x59, 0x59,
+	0x59, 0x59, 0x59, 0x59, 0x59, 0x59, 0x5A, 0x5A,
+	0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+	0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B, 0x5B,
+	0x5B, 0x5B, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+	0x5C, 0x5C, 0x5C, 0x5C, 0x5D, 0x5D, 0x5D, 0x5D,
+	0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5D, 0x5E, 0x5E,
+	0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E, 0x5E,
+	0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F, 0x5F,
+	0x5F, 0x5F, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+	0x60, 0x60, 0x60, 0x60, 0x60, 0x61, 0x61, 0x61,
+	0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x61, 0x62,
+	0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62,
+	0x62, 0x62, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x64, 0x64, 0x64,
+	0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64, 0x64,
+	0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65, 0x65,
+	0x65, 0x65, 0x65, 0x66, 0x66, 0x66, 0x66, 0x66,
+	0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x67, 0x67,
+	0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67, 0x67,
+	0x67, 0x67, 0x68, 0x68, 0x68, 0x68, 0x68, 0x68,
+	0x68, 0x68, 0x68, 0x68, 0x68, 0x69, 0x69, 0x69,
+	0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69, 0x69,
+	0x69, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6A,
+	0x6A, 0x6A, 0x6A, 0x6A, 0x6A, 0x6B, 0x6B, 0x6B,
+	0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B, 0x6B,
+	0x6B, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6C,
+	0x6C, 0x6C, 0x6C, 0x6C, 0x6C, 0x6D, 0x6D, 0x6D,
+	0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D, 0x6D,
+	0x6D, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6E,
+	0x6E, 0x6E, 0x6E, 0x6E, 0x6E, 0x6F, 0x6F, 0x6F,
+	0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F, 0x6F,
+	0x6F, 0x6F, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70,
+	0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x71, 0x71,
+	0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71, 0x71,
+	0x71, 0x71, 0x71, 0x72, 0x72, 0x72, 0x72, 0x72,
+	0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
+	0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73, 0x73,
+	0x73, 0x73, 0x73, 0x73, 0x73, 0x74, 0x74, 0x74,
+	0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74, 0x74,
+	0x74, 0x74, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+	0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75, 0x75,
+	0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76, 0x76,
+	0x76, 0x76, 0x76, 0x76, 0x76, 0x77, 0x77, 0x77,
+	0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
+	0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x78, 0x78,
+	0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+	0x78, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
+	0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x7A, 0x7A,
+	0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7A,
+	0x7A, 0x7A, 0x7A, 0x7A, 0x7A, 0x7B, 0x7B, 0x7B,
+	0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B, 0x7B,
+	0x7B, 0x7B, 0x7B, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+	0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C, 0x7C,
+	0x7C, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+	0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D, 0x7D,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7F, 0x7F,
+	0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F,
+	0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x80, 0x80, 0x80,
+	0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+	0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x81, 0x81,
+	0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81,
+	0x81, 0x81, 0x81, 0x82, 0x82, 0x82, 0x82, 0x82,
+	0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82, 0x82,
+	0x82, 0x82, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+	0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83, 0x83,
+	0x83, 0x83, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+	0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84,
+	0x84, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+	0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85,
+	0x85, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+	0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86, 0x86,
+	0x86, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+	0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87, 0x87,
+	0x87, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+	0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+	0x88, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+	0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89, 0x89,
+	0x89, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+	0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A, 0x8A,
+	0x8A, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+	0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B, 0x8B,
+	0x8B, 0x8B, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+	0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C, 0x8C,
+	0x8C, 0x8C, 0x8C, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+	0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D, 0x8D,
+	0x8D, 0x8D, 0x8D, 0x8D, 0x8E, 0x8E, 0x8E, 0x8E,
+	0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8E,
+	0x8E, 0x8E, 0x8E, 0x8E, 0x8E, 0x8F, 0x8F, 0x8F,
+	0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F,
+	0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x8F, 0x90, 0x90,
+	0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90,
+	0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x90, 0x91,
+	0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+	0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91, 0x91,
+	0x91, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+	0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92, 0x92,
+	0x92, 0x92, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+	0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93,
+	0x93, 0x93, 0x93, 0x93, 0x94, 0x94, 0x94, 0x94,
+	0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x94,
+	0x94, 0x94, 0x94, 0x94, 0x94, 0x94, 0x95, 0x95,
+	0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+	0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95, 0x95,
+	0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+	0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96,
+	0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x97,
+	0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97,
+	0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98,
+	0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+	0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98,
+	0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+	0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
+	0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+	0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A,
+	0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B,
+	0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+	0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C,
+	0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D,
+	0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D,
+	0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E,
+	0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+	0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E,
+	0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+	0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F,
+	0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0, 0xA0,
+	0xA0, 0xA0, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+	0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1,
+	0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA1, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2, 0xA2,
+	0xA2, 0xA2, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+	0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3,
+	0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA3, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4, 0xA4,
+	0xA4, 0xA4, 0xA4, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5, 0xA5,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+	0xA6, 0xA6, 0xA6, 0xA6, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7, 0xA7,
+	0xA7, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+	0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8,
+	0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA8, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9, 0xA9,
+	0xA9, 0xA9, 0xA9, 0xA9, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xAA, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+	0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB,
+	0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAB, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAC,
+	0xAC, 0xAC, 0xAC, 0xAC, 0xAC, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD, 0xAD,
+	0xAD, 0xAD, 0xAD, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE, 0xAE,
+	0xAE, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+	0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF,
+	0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xAF, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0,
+	0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB0, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1, 0xB1,
+	0xB1, 0xB1, 0xB1, 0xB1, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2, 0xB2,
+	0xB2, 0xB2, 0xB2, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3, 0xB3,
+	0xB3, 0xB3, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4, 0xB4,
+	0xB4, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5, 0xB5,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6, 0xB6,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7,
+	0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB7, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8,
+	0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB8, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9,
+	0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xB9, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA,
+	0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBA, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB, 0xBB,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC, 0xBC,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD, 0xBD,
+	0xBD, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE, 0xBE,
+	0xBE, 0xBE, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF, 0xBF,
+	0xBF, 0xBF, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0,
+	0xC0, 0xC0, 0xC0, 0xC0, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC1,
+	0xC1, 0xC1, 0xC1, 0xC1, 0xC1, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2,
+	0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC2, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4, 0xC4,
+	0xC4, 0xC4, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5, 0xC5,
+	0xC5, 0xC5, 0xC5, 0xC5, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6,
+	0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7, 0xC7,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+	0xC8, 0xC8, 0xC8, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9,
+	0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xC9, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA, 0xCA,
+	0xCA, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB, 0xCB,
+	0xCB, 0xCB, 0xCB, 0xCB, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC,
+	0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD, 0xCD,
+	0xCD, 0xCD, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE,
+	0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCE, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF,
+	0xCF, 0xCF, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0,
+	0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1, 0xD1,
+	0xD1, 0xD1, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2,
+	0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD2, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3,
+	0xD3, 0xD3, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4,
+	0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD4, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5,
+	0xD5, 0xD5, 0xD5, 0xD5, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6,
+	0xD6, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7,
+	0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8,
+	0xD8, 0xD8, 0xD8, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9,
+	0xD9, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA,
+	0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB,
+	0xDB, 0xDB, 0xDB, 0xDB, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC,
+	0xDC, 0xDC, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDD,
+	0xDD, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE,
+	0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF,
+	0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+	0xE0, 0xE0, 0xE0, 0xE0, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1, 0xE1,
+	0xE1, 0xE1, 0xE1, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2, 0xE2,
+	0xE2, 0xE2, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3, 0xE3,
+	0xE3, 0xE3, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4, 0xE4,
+	0xE4, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5, 0xE5,
+	0xE5, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6, 0xE6,
+	0xE6, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7, 0xE7,
+	0xE7, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8,
+	0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9,
+	0xE9, 0xE9, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA,
+	0xEA, 0xEA, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB,
+	0xEB, 0xEB, 0xEB, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC,
+	0xEC, 0xEC, 0xEC, 0xEC, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED,
+	0xED, 0xED, 0xED, 0xED, 0xED, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF, 0xEF,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xF0, 0xF0, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1,
+	0xF1, 0xF1, 0xF1, 0xF1, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
+	0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4,
+	0xF4, 0xF4, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF5,
+	0xF5, 0xF5, 0xF5, 0xF5, 0xF5, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7,
+	0xF7, 0xF7, 0xF7, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8,
+	0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9,
+	0xF9, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA,
+	0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB, 0xFB,
+	0xFB, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFC,
+	0xFC, 0xFC, 0xFC, 0xFC, 0xFC, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD,
+	0xFD, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE,
+	0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+};
+
+void mdp4_mixer_gc_lut_setup(int mixer_num)
+{
+	unsigned char *base;
+	uint32 data;
+	char val;
+	int i, off;
+
+	if (mixer_num) 	/* mixer number, /dev/fb0, /dev/fb1 */
+		base = MDP_BASE + MDP4_OVERLAYPROC1_BASE;/* 0x18000 */
+	else
+		base = MDP_BASE + MDP4_OVERLAYPROC0_BASE;/* 0x10000 */
+
+	base += 0x4000;	/* GC_LUT offset */
+
+	off = 0;
+	for (i = 0; i < 4096; i++) {
+		val = gc_lut[i];
+		data = (val << 16 | val << 8 | val); /* R, B, and G are same */
+		outpdw(base + off, data);
+		off += 4;
+	}
+}
+
+uint32 igc_video_lut[] = {	 /* non linear */
+	0x0, 0x1, 0x2, 0x4, 0x5, 0x6, 0x7, 0x9,
+	0xA, 0xB, 0xC, 0xE, 0xF, 0x10, 0x12, 0x14,
+	0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F, 0x21, 0x23,
+	0x25, 0x28, 0x2A, 0x2D, 0x30, 0x32, 0x35, 0x38,
+	0x3B, 0x3E, 0x42, 0x45, 0x48, 0x4C, 0x4F, 0x53,
+	0x57, 0x5B, 0x5F, 0x63, 0x67, 0x6B, 0x70, 0x74,
+	0x79, 0x7E, 0x83, 0x88, 0x8D, 0x92, 0x97, 0x9C,
+	0xA2, 0xA8, 0xAD, 0xB3, 0xB9, 0xBF, 0xC5, 0xCC,
+	0xD2, 0xD8, 0xDF, 0xE6, 0xED, 0xF4, 0xFB, 0x102,
+	0x109, 0x111, 0x118, 0x120, 0x128, 0x130, 0x138, 0x140,
+	0x149, 0x151, 0x15A, 0x162, 0x16B, 0x174, 0x17D, 0x186,
+	0x190, 0x199, 0x1A3, 0x1AC, 0x1B6, 0x1C0, 0x1CA, 0x1D5,
+	0x1DF, 0x1EA, 0x1F4, 0x1FF, 0x20A, 0x215, 0x220, 0x22B,
+	0x237, 0x242, 0x24E, 0x25A, 0x266, 0x272, 0x27F, 0x28B,
+	0x298, 0x2A4, 0x2B1, 0x2BE, 0x2CB, 0x2D8, 0x2E6, 0x2F3,
+	0x301, 0x30F, 0x31D, 0x32B, 0x339, 0x348, 0x356, 0x365,
+	0x374, 0x383, 0x392, 0x3A1, 0x3B1, 0x3C0, 0x3D0, 0x3E0,
+	0x3F0, 0x400, 0x411, 0x421, 0x432, 0x443, 0x454, 0x465,
+	0x476, 0x487, 0x499, 0x4AB, 0x4BD, 0x4CF, 0x4E1, 0x4F3,
+	0x506, 0x518, 0x52B, 0x53E, 0x551, 0x565, 0x578, 0x58C,
+	0x5A0, 0x5B3, 0x5C8, 0x5DC, 0x5F0, 0x605, 0x61A, 0x62E,
+	0x643, 0x659, 0x66E, 0x684, 0x699, 0x6AF, 0x6C5, 0x6DB,
+	0x6F2, 0x708, 0x71F, 0x736, 0x74D, 0x764, 0x77C, 0x793,
+	0x7AB, 0x7C3, 0x7DB, 0x7F3, 0x80B, 0x824, 0x83D, 0x855,
+	0x86F, 0x888, 0x8A1, 0x8BB, 0x8D4, 0x8EE, 0x908, 0x923,
+	0x93D, 0x958, 0x973, 0x98E, 0x9A9, 0x9C4, 0x9DF, 0x9FB,
+	0xA17, 0xA33, 0xA4F, 0xA6C, 0xA88, 0xAA5, 0xAC2, 0xADF,
+	0xAFC, 0xB19, 0xB37, 0xB55, 0xB73, 0xB91, 0xBAF, 0xBCE,
+	0xBEC, 0xC0B, 0xC2A, 0xC4A, 0xC69, 0xC89, 0xCA8, 0xCC8,
+	0xCE8, 0xD09, 0xD29, 0xD4A, 0xD6B, 0xD8C, 0xDAD, 0xDCF,
+	0xDF0, 0xE12, 0xE34, 0xE56, 0xE79, 0xE9B, 0xEBE, 0xEE1,
+	0xF04, 0xF27, 0xF4B, 0xF6E, 0xF92, 0xFB6, 0xFDB, 0xFFF,
+};
+
+void mdp4_vg_igc_lut_setup(int vp_num)
+{
+	unsigned char *base;
+	int i, voff, off;
+	uint32 data, val;
+
+	voff = MDP4_VIDEO_OFF * vp_num;
+	base = MDP_BASE + MDP4_VIDEO_BASE + voff + 0x5000;
+
+	off = 0;
+	for (i = 0; i < 256; i++) {
+		val = igc_video_lut[i];
+		data = (val << 16 | val);	/* color 0 and 1 */
+		outpdw(base + off, data);
+		outpdw(base + off + 0x800, val);	/* color 2 */
+		off += 4;
+	}
+}
+
+uint32 igc_rgb_lut[] = {   /* linear */
+	0x0, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70,
+	0x80, 0x91, 0xA1, 0xB1, 0xC1, 0xD1, 0xE1, 0xF1,
+	0x101, 0x111, 0x121, 0x131, 0x141, 0x151, 0x161, 0x171,
+	0x181, 0x191, 0x1A2, 0x1B2, 0x1C2, 0x1D2, 0x1E2, 0x1F2,
+	0x202, 0x212, 0x222, 0x232, 0x242, 0x252, 0x262, 0x272,
+	0x282, 0x292, 0x2A2, 0x2B3, 0x2C3, 0x2D3, 0x2E3, 0x2F3,
+	0x303, 0x313, 0x323, 0x333, 0x343, 0x353, 0x363, 0x373,
+	0x383, 0x393, 0x3A3, 0x3B3, 0x3C4, 0x3D4, 0x3E4, 0x3F4,
+	0x404, 0x414, 0x424, 0x434, 0x444, 0x454, 0x464, 0x474,
+	0x484, 0x494, 0x4A4, 0x4B4, 0x4C4, 0x4D5, 0x4E5, 0x4F5,
+	0x505, 0x515, 0x525, 0x535, 0x545, 0x555, 0x565, 0x575,
+	0x585, 0x595, 0x5A5, 0x5B5, 0x5C5, 0x5D5, 0x5E6, 0x5F6,
+	0x606, 0x616, 0x626, 0x636, 0x646, 0x656, 0x666, 0x676,
+	0x686, 0x696, 0x6A6, 0x6B6, 0x6C6, 0x6D6, 0x6E6, 0x6F7,
+	0x707, 0x717, 0x727, 0x737, 0x747, 0x757, 0x767, 0x777,
+	0x787, 0x797, 0x7A7, 0x7B7, 0x7C7, 0x7D7, 0x7E7, 0x7F7,
+	0x808, 0x818, 0x828, 0x838, 0x848, 0x858, 0x868, 0x878,
+	0x888, 0x898, 0x8A8, 0x8B8, 0x8C8, 0x8D8, 0x8E8, 0x8F8,
+	0x908, 0x919, 0x929, 0x939, 0x949, 0x959, 0x969, 0x979,
+	0x989, 0x999, 0x9A9, 0x9B9, 0x9C9, 0x9D9, 0x9E9, 0x9F9,
+	0xA09, 0xA19, 0xA2A, 0xA3A, 0xA4A, 0xA5A, 0xA6A, 0xA7A,
+	0xA8A, 0xA9A, 0xAAA, 0xABA, 0xACA, 0xADA, 0xAEA, 0xAFA,
+	0xB0A, 0xB1A, 0xB2A, 0xB3B, 0xB4B, 0xB5B, 0xB6B, 0xB7B,
+	0xB8B, 0xB9B, 0xBAB, 0xBBB, 0xBCB, 0xBDB, 0xBEB, 0xBFB,
+	0xC0B, 0xC1B, 0xC2B, 0xC3B, 0xC4C, 0xC5C, 0xC6C, 0xC7C,
+	0xC8C, 0xC9C, 0xCAC, 0xCBC, 0xCCC, 0xCDC, 0xCEC, 0xCFC,
+	0xD0C, 0xD1C, 0xD2C, 0xD3C, 0xD4C, 0xD5D, 0xD6D, 0xD7D,
+	0xD8D, 0xD9D, 0xDAD, 0xDBD, 0xDCD, 0xDDD, 0xDED, 0xDFD,
+	0xE0D, 0xE1D, 0xE2D, 0xE3D, 0xE4D, 0xE5D, 0xE6E, 0xE7E,
+	0xE8E, 0xE9E, 0xEAE, 0xEBE, 0xECE, 0xEDE, 0xEEE, 0xEFE,
+	0xF0E, 0xF1E, 0xF2E, 0xF3E, 0xF4E, 0xF5E, 0xF6E, 0xF7F,
+	0xF8F, 0xF9F, 0xFAF, 0xFBF, 0xFCF, 0xFDF, 0xFEF, 0xFFF,
+};
+
+void mdp4_rgb_igc_lut_setup(int num)
+{
+	unsigned char *base;
+	int i, voff, off;
+	uint32 data, val;
+
+	voff = MDP4_RGB_OFF * num;
+	base = MDP_BASE + MDP4_RGB_BASE + voff + 0x5000;
+
+	off = 0;
+	for (i = 0; i < 256; i++) {
+		val = igc_rgb_lut[i];
+		data = (val << 16 | val);	/* color 0 and 1 */
+		outpdw(base + off, data);
+		outpdw(base + off + 0x800, val);	/* color 2 */
+		off += 4;
+	}
+}
diff --git a/drivers/staging/msm/mdp_cursor.c b/drivers/staging/msm/mdp_cursor.c
new file mode 100644
index 0000000..7d28f30
--- /dev/null
+++ b/drivers/staging/msm/mdp_cursor.c
@@ -0,0 +1,104 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static int cursor_enabled;
+
+int mdp_hw_cursor_update(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct fb_image *img = &cursor->image;
+	int calpha_en, transp_en;
+	int alpha;
+	int ret = 0;
+
+	if ((img->width > MDP_CURSOR_WIDTH) ||
+	    (img->height > MDP_CURSOR_HEIGHT) ||
+	    (img->depth != 32))
+		return -EINVAL;
+
+	if (cursor->set & FB_CUR_SETPOS)
+		MDP_OUTP(MDP_BASE + 0x9004c, (img->dy << 16) | img->dx);
+
+	if (cursor->set & FB_CUR_SETIMAGE) {
+		ret = copy_from_user(mfd->cursor_buf, img->data,
+					img->width*img->height*4);
+		if (ret)
+			return ret;
+
+		if (img->bg_color == 0xffffffff)
+			transp_en = 0;
+		else
+			transp_en = 1;
+
+		alpha = (img->fg_color & 0xff000000) >> 24;
+
+		if (alpha)
+			calpha_en = 0x2; /* xrgb */
+		else
+			calpha_en = 0x1; /* argb */
+
+		MDP_OUTP(MDP_BASE + 0x90044, (img->height << 16) | img->width);
+		MDP_OUTP(MDP_BASE + 0x90048, mfd->cursor_buf_phys);
+		/* order the writes the cursor_buf before updating the
+		 * hardware */
+//		dma_coherent_pre_ops();
+		MDP_OUTP(MDP_BASE + 0x90060,
+			 (transp_en << 3) | (calpha_en << 1) |
+			 (inp32(MDP_BASE + 0x90060) & 0x1));
+#ifdef CONFIG_FB_MSM_MDP40
+		MDP_OUTP(MDP_BASE + 0x90064, (alpha << 24));
+		MDP_OUTP(MDP_BASE + 0x90068, (0xffffff & img->bg_color));
+		MDP_OUTP(MDP_BASE + 0x9006C, (0xffffff & img->bg_color));
+#else
+		MDP_OUTP(MDP_BASE + 0x90064,
+			 (alpha << 24) | (0xffffff & img->bg_color));
+		MDP_OUTP(MDP_BASE + 0x90068, 0);
+#endif
+	}
+
+	if ((cursor->enable) && (!cursor_enabled)) {
+		cursor_enabled = 1;
+		MDP_OUTP(MDP_BASE + 0x90060, inp32(MDP_BASE + 0x90060) | 0x1);
+	} else if ((!cursor->enable) && (cursor_enabled)) {
+		cursor_enabled = 0;
+		MDP_OUTP(MDP_BASE + 0x90060,
+			 inp32(MDP_BASE + 0x90060) & (~0x1));
+	}
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp_dma.c b/drivers/staging/msm/mdp_dma.c
new file mode 100644
index 0000000..639918b
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma.c
@@ -0,0 +1,561 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+static uint32 mdp_last_dma2_update_width;
+static uint32 mdp_last_dma2_update_height;
+static uint32 mdp_curr_dma2_update_width;
+static uint32 mdp_curr_dma2_update_height;
+
+ktime_t mdp_dma2_last_update_time = { 0 };
+
+int mdp_lcd_rd_cnt_offset_slow = 20;
+int mdp_lcd_rd_cnt_offset_fast = 20;
+int mdp_vsync_usec_wait_line_too_short = 5;
+uint32 mdp_dma2_update_time_in_usec;
+uint32 mdp_total_vdopkts;
+
+extern u32 msm_fb_debug_enabled;
+extern struct workqueue_struct *mdp_dma_wq;
+
+int vsync_start_y_adjust = 4;
+
+static void mdp_dma2_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	int mddi_dest = FALSE;
+	uint32 outBpp = iBuf->bpp;
+	uint32 dma2_cfg_reg;
+	uint8 *src;
+	uint32 mddi_ld_param;
+	uint16 mddi_vdo_packet_reg;
+	struct msm_fb_panel_data *pdata =
+	    (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+	uint32 ystride = mfd->fbi->fix.line_length;
+
+	dma2_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+	    DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+#ifdef CONFIG_FB_MSM_MDP30
+	/*
+	 * Software workaround:  On 7x25/7x27, the MDP will not
+	 * respond if dma_w is 1 pixel.  Set the update width to
+	 * 2 pixels and adjust the x offset if needed.
+	 */
+	if (iBuf->dma_w == 1) {
+		iBuf->dma_w = 2;
+		if (iBuf->dma_x == (iBuf->ibuf_width - 2))
+			iBuf->dma_x--;
+	}
+#endif
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (outBpp == 4)
+		dma2_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+	if (outBpp == 2)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+	mddi_ld_param = 0;
+	mddi_vdo_packet_reg = mfd->panel_info.mddi.vdopkt;
+
+	if ((mfd->panel_info.type == MDDI_PANEL) ||
+	    (mfd->panel_info.type == EXT_MDDI_PANEL)) {
+		dma2_cfg_reg |= DMA_OUT_SEL_MDDI;
+		mddi_dest = TRUE;
+
+		if (mfd->panel_info.type == MDDI_PANEL) {
+			mdp_total_vdopkts++;
+			if (mfd->panel_info.pdest == DISPLAY_1) {
+				dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_PRIMARY;
+				mddi_ld_param = 0;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+				mddi_window_adjust(mfd, iBuf->dma_x,
+						   iBuf->dma_w - 1, iBuf->dma_y,
+						   iBuf->dma_h - 1);
+#endif
+			} else {
+				dma2_cfg_reg |=
+				    DMA_MDDI_DMAOUT_LCD_SEL_SECONDARY;
+				mddi_ld_param = 1;
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+				mddi_window_adjust(mfd, iBuf->dma_x,
+						   iBuf->dma_w - 1, iBuf->dma_y,
+						   iBuf->dma_h - 1);
+#endif
+			}
+		} else {
+			dma2_cfg_reg |= DMA_MDDI_DMAOUT_LCD_SEL_EXTERNAL;
+			mddi_ld_param = 2;
+		}
+	} else {
+		if (mfd->panel_info.pdest == DISPLAY_1) {
+			dma2_cfg_reg |= DMA_AHBM_LCD_SEL_PRIMARY;
+			outp32(MDP_EBI2_LCD0, mfd->data_port_phys);
+		} else {
+			dma2_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+			outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+		}
+	}
+
+	dma2_cfg_reg |= DMA_DITHER_EN;
+
+	src = (uint8 *) iBuf->buf;
+	/* starting input address */
+	src += iBuf->dma_x * outBpp + iBuf->dma_y * ystride;
+
+	mdp_curr_dma2_update_width = iBuf->dma_w;
+	mdp_curr_dma2_update_height = iBuf->dma_h;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0184,
+			(iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0188, src);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x018C, ystride);
+#else
+	MDP_OUTP(MDP_BASE + 0x90004, (iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_BASE + 0x90008, src);
+	MDP_OUTP(MDP_BASE + 0x9000c, ystride);
+#endif
+
+	if (mfd->panel_info.bpp == 18) {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else {
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	}
+
+	if (mddi_dest) {
+#ifdef CONFIG_FB_MSM_MDP22
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0194,
+			 (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a0, mddi_ld_param);
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01a4,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#else
+		MDP_OUTP(MDP_BASE + 0x90010, (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_BASE + 0x00090, mddi_ld_param);
+		MDP_OUTP(MDP_BASE + 0x00094,
+			 (MDDI_VDO_PACKET_DESC << 16) | mddi_vdo_packet_reg);
+#endif
+	} else {
+		/* setting EBI2 LCDC write window */
+		pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+				iBuf->dma_h);
+	}
+
+	/* dma2 config register */
+#ifdef MDP_HW_VSYNC
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+
+	if ((mfd->use_mdp_vsync) &&
+	    (mfd->ibuf.vsync_enable) && (mfd->panel_info.lcd.vsync_enable)) {
+		uint32 start_y;
+
+		if (vsync_start_y_adjust <= iBuf->dma_y)
+			start_y = iBuf->dma_y - vsync_start_y_adjust;
+		else
+			start_y =
+			    (mfd->total_lcd_lines - 1) - (vsync_start_y_adjust -
+							  iBuf->dma_y);
+
+		/*
+		 * MDP VSYNC clock must be On by now so, we don't have to
+		 * re-enable it
+		 */
+		MDP_OUTP(MDP_BASE + 0x210, start_y);
+		MDP_OUTP(MDP_BASE + 0x20c, 1);	/* enable prim vsync */
+	} else {
+		MDP_OUTP(MDP_BASE + 0x20c, 0);	/* disable prim vsync */
+	}
+#else
+#ifdef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0180, dma2_cfg_reg);
+#else
+	MDP_OUTP(MDP_BASE + 0x90000, dma2_cfg_reg);
+#endif
+#endif /* MDP_HW_VSYNC */
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
+
+static ktime_t vt = { 0 };
+int mdp_usec_diff_threshold = 100;
+int mdp_expected_usec_wait;
+
+enum hrtimer_restart mdp_dma2_vsync_hrtimer_handler(struct hrtimer *ht)
+{
+	struct msm_fb_data_type *mfd = NULL;
+
+	mfd = container_of(ht, struct msm_fb_data_type, dma_hrtimer);
+
+	mdp_pipe_kickoff(MDP_DMA2_TERM, mfd);
+
+	if (msm_fb_debug_enabled) {
+		ktime_t t;
+		int usec_diff;
+		int actual_wait;
+
+		t = ktime_get_real();
+
+		actual_wait =
+		    (t.tv.sec - vt.tv.sec) * 1000000 + (t.tv.nsec -
+							vt.tv.nsec) / 1000;
+		usec_diff = actual_wait - mdp_expected_usec_wait;
+
+		if ((mdp_usec_diff_threshold < usec_diff) || (usec_diff < 0))
+			MSM_FB_DEBUG
+			    ("HRT Diff = %d usec Exp=%d usec  Act=%d usec\n",
+			     usec_diff, mdp_expected_usec_wait, actual_wait);
+	}
+
+	return HRTIMER_NORESTART;
+}
+
+static void mdp_dma_schedule(struct msm_fb_data_type *mfd, uint32 term)
+{
+	/*
+	 * dma2 configure VSYNC block
+	 * vsync supported on Primary LCD only for now
+	 */
+	int32 mdp_lcd_rd_cnt;
+	uint32 usec_wait_time;
+	uint32 start_y;
+
+	/*
+	 * ToDo: if we can move HRT timer callback to workqueue, we can
+	 * move DMA2 power on under mdp_pipe_kickoff().
+	 * This will save a power for hrt time wait.
+	 * However if the latency for context switch (hrt irq -> workqueue)
+	 * is too big, we will miss the vsync timing.
+	 */
+	if (term == MDP_DMA2_TERM)
+		mdp_pipe_ctrl(MDP_DMA2_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	mdp_dma2_update_time_in_usec =
+	    MDP_KTIME2USEC(mdp_dma2_last_update_time);
+
+	if ((!mfd->ibuf.vsync_enable) || (!mfd->panel_info.lcd.vsync_enable)
+	    || (mfd->use_mdp_vsync)) {
+		mdp_pipe_kickoff(term, mfd);
+		return;
+	}
+	/* SW vsync logic starts here */
+
+	/* get current rd counter */
+	mdp_lcd_rd_cnt = mdp_get_lcd_line_counter(mfd);
+	if (mdp_dma2_update_time_in_usec != 0) {
+		uint32 num, den;
+
+		/*
+		 * roi width boundary calculation to know the size of pixel
+		 * width that MDP can send faster or slower than LCD read
+		 * pointer
+		 */
+
+		num = mdp_last_dma2_update_width * mdp_last_dma2_update_height;
+		den =
+		    (((mfd->panel_info.lcd.refx100 * mfd->total_lcd_lines) /
+		      1000) * (mdp_dma2_update_time_in_usec / 100)) / 1000;
+
+		if (den == 0)
+			mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+			    mfd->panel_info.xres + 1;
+		else
+			mfd->vsync_width_boundary[mdp_last_dma2_update_width] =
+			    (int)(num / den);
+	}
+
+	if (mfd->vsync_width_boundary[mdp_last_dma2_update_width] >
+	    mdp_curr_dma2_update_width) {
+		/* MDP wrp is faster than LCD rdp */
+		mdp_lcd_rd_cnt += mdp_lcd_rd_cnt_offset_fast;
+	} else {
+		/* MDP wrp is slower than LCD rdp */
+		mdp_lcd_rd_cnt -= mdp_lcd_rd_cnt_offset_slow;
+	}
+
+	if (mdp_lcd_rd_cnt < 0)
+		mdp_lcd_rd_cnt = mfd->total_lcd_lines + mdp_lcd_rd_cnt;
+	else if (mdp_lcd_rd_cnt > mfd->total_lcd_lines)
+		mdp_lcd_rd_cnt = mdp_lcd_rd_cnt - mfd->total_lcd_lines - 1;
+
+	/* get wrt pointer position */
+	start_y = mfd->ibuf.dma_y;
+
+	/* measure line difference between start_y and rd counter */
+	if (start_y > mdp_lcd_rd_cnt) {
+		/*
+		 * *100 for lcd_ref_hzx100 was already multiplied by 100
+		 * *1000000 is for usec conversion
+		 */
+
+		if ((start_y - mdp_lcd_rd_cnt) <=
+		    mdp_vsync_usec_wait_line_too_short)
+			usec_wait_time = 0;
+		else
+			usec_wait_time =
+			    ((start_y -
+			      mdp_lcd_rd_cnt) * 1000000) /
+			    ((mfd->total_lcd_lines *
+			      mfd->panel_info.lcd.refx100) / 100);
+	} else {
+		if ((start_y + (mfd->total_lcd_lines - mdp_lcd_rd_cnt)) <=
+		    mdp_vsync_usec_wait_line_too_short)
+			usec_wait_time = 0;
+		else
+			usec_wait_time =
+			    ((start_y +
+			      (mfd->total_lcd_lines -
+			       mdp_lcd_rd_cnt)) * 1000000) /
+			    ((mfd->total_lcd_lines *
+			      mfd->panel_info.lcd.refx100) / 100);
+	}
+
+	mdp_last_dma2_update_width = mdp_curr_dma2_update_width;
+	mdp_last_dma2_update_height = mdp_curr_dma2_update_height;
+
+	if (usec_wait_time == 0) {
+		mdp_pipe_kickoff(term, mfd);
+	} else {
+		ktime_t wait_time;
+
+		wait_time.tv.sec = 0;
+		wait_time.tv.nsec = usec_wait_time * 1000;
+
+		if (msm_fb_debug_enabled) {
+			vt = ktime_get_real();
+			mdp_expected_usec_wait = usec_wait_time;
+		}
+		hrtimer_start(&mfd->dma_hrtimer, wait_time, HRTIMER_MODE_REL);
+	}
+}
+
+#ifdef MDDI_HOST_WINDOW_WORKAROUND
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf;
+	uint32 upper_height;
+
+	if (mfd->panel.type == EXT_MDDI_PANEL) {
+		mdp_dma2_update_sub(mfd);
+		return;
+	}
+
+	iBuf = &mfd->ibuf;
+
+	upper_height =
+	    (uint32) mddi_assign_pkt_height((uint16) iBuf->dma_w,
+					    (uint16) iBuf->dma_h, 18);
+
+	if (upper_height >= iBuf->dma_h) {
+		mdp_dma2_update_sub(mfd);
+	} else {
+		MDPIBUF lower_height;
+
+		/* sending the upper region first */
+		lower_height = iBuf->dma_h - upper_height;
+		iBuf->dma_h = upper_height;
+		mdp_dma2_update_sub(mfd);
+
+		/* sending the lower region second */
+		iBuf->dma_h = lower_height;
+		iBuf->dma_y += lower_height;
+		iBuf->vsync_enable = FALSE;
+		mdp_dma2_update_sub(mfd);
+	}
+}
+
+void mdp_dma2_update_sub(struct msm_fb_data_type *mfd)
+#else
+void mdp_dma2_update(struct msm_fb_data_type *mfd)
+#endif
+{
+	down(&mfd->dma->mutex);
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		down(&mfd->sem);
+		mfd->ibuf_flushed = TRUE;
+		mdp_dma2_update_lcd(mfd);
+
+		mdp_enable_irq(MDP_DMA2_TERM);
+		mfd->dma->busy = TRUE;
+		INIT_COMPLETION(mfd->dma->comp);
+
+		/* schedule DMA to start */
+		mdp_dma_schedule(mfd, MDP_DMA2_TERM);
+		up(&mfd->sem);
+
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&mfd->dma->comp);
+		mdp_disable_irq(MDP_DMA2_TERM);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+	up(&mfd->dma->mutex);
+}
+
+void mdp_lcd_update_workqueue_handler(struct work_struct *work)
+{
+	struct msm_fb_data_type *mfd = NULL;
+
+	mfd = container_of(work, struct msm_fb_data_type, dma_update_worker);
+	if (mfd)
+		mfd->dma_fnc(mfd);
+}
+
+void mdp_set_dma_pan_info(struct fb_info *info, struct mdp_dirty_region *dirty,
+			  boolean sync)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+	int bpp = info->var.bits_per_pixel / 8;
+
+	down(&mfd->sem);
+	iBuf = &mfd->ibuf;
+	iBuf->buf = (uint8 *) info->fix.smem_start;
+	iBuf->buf += info->var.xoffset * bpp +
+			info->var.yoffset * info->fix.line_length;
+
+	iBuf->ibuf_width = info->var.xres_virtual;
+	iBuf->bpp = bpp;
+
+	iBuf->vsync_enable = sync;
+
+	if (dirty) {
+		/*
+		 * ToDo: dirty region check inside var.xoffset+xres
+		 * <-> var.yoffset+yres
+		 */
+		iBuf->dma_x = dirty->xoffset % info->var.xres;
+		iBuf->dma_y = dirty->yoffset % info->var.yres;
+		iBuf->dma_w = dirty->width;
+		iBuf->dma_h = dirty->height;
+	} else {
+		iBuf->dma_x = 0;
+		iBuf->dma_y = 0;
+		iBuf->dma_w = info->var.xres;
+		iBuf->dma_h = info->var.yres;
+	}
+	mfd->ibuf_flushed = FALSE;
+	up(&mfd->sem);
+}
+
+void mdp_set_offset_info(struct fb_info *info, uint32 addr, uint32 sync)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+
+	int bpp = info->var.bits_per_pixel / 8;
+
+	down(&mfd->sem);
+	iBuf = &mfd->ibuf;
+	iBuf->ibuf_width = info->var.xres_virtual;
+	iBuf->bpp = bpp;
+	iBuf->vsync_enable = sync;
+	iBuf->dma_x = 0;
+	iBuf->dma_y = 0;
+	iBuf->dma_w = info->var.xres;
+	iBuf->dma_h = info->var.yres;
+	iBuf->buf = (uint8 *) addr;
+
+	mfd->ibuf_flushed = FALSE;
+	up(&mfd->sem);
+}
+
+void mdp_dma_pan_update(struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	MDPIBUF *iBuf;
+
+	iBuf = &mfd->ibuf;
+
+	if (mfd->sw_currently_refreshing) {
+		/* we need to wait for the pending update */
+		mfd->pan_waiting = TRUE;
+		if (!mfd->ibuf_flushed) {
+			wait_for_completion_killable(&mfd->pan_comp);
+		}
+		/* waiting for this update to complete */
+		mfd->pan_waiting = TRUE;
+		wait_for_completion_killable(&mfd->pan_comp);
+	} else
+		mfd->dma_fnc(mfd);
+}
+
+void mdp_refresh_screen(unsigned long data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+	if ((mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+		init_timer(&mfd->refresh_timer);
+		mfd->refresh_timer.function = mdp_refresh_screen;
+		mfd->refresh_timer.data = data;
+
+		if (mfd->dma->busy)
+			/* come back in 1 msec */
+			mfd->refresh_timer.expires = jiffies + (HZ / 1000);
+		else
+			mfd->refresh_timer.expires =
+			    jiffies + mfd->refresh_timer_duration;
+
+		add_timer(&mfd->refresh_timer);
+
+		if (!mfd->dma->busy) {
+			if (!queue_work(mdp_dma_wq, &mfd->dma_update_worker)) {
+				MSM_FB_DEBUG("mdp_dma: can't queue_work! -> \
+			MDP/MDDI/LCD clock speed needs to be increased\n");
+			}
+		}
+	} else {
+		if (!mfd->hw_refresh)
+			complete(&mfd->refresher_comp);
+	}
+}
diff --git a/drivers/staging/msm/mdp_dma_lcdc.c b/drivers/staging/msm/mdp_dma_lcdc.c
new file mode 100644
index 0000000..b57fa1a
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_lcdc.c
@@ -0,0 +1,379 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define LCDC_BASE	0xC0000
+#define DTV_BASE	0xD0000
+#define DMA_E_BASE      0xB0000
+#else
+#define LCDC_BASE	0xE0000
+#endif
+
+#define DMA_P_BASE      0x90000
+
+extern spinlock_t mdp_spin_lock;
+#ifndef CONFIG_FB_MSM_MDP40
+extern uint32 mdp_intr_mask;
+#endif
+
+int first_pixel_start_x;
+int first_pixel_start_y;
+
+int mdp_lcdc_on(struct platform_device *pdev)
+{
+	int lcdc_width;
+	int lcdc_height;
+	int lcdc_bpp;
+	int lcdc_border_clr;
+	int lcdc_underflow_clr;
+	int lcdc_hsync_skew;
+
+	int hsync_period;
+	int hsync_ctrl;
+	int vsync_period;
+	int display_hctl;
+	int display_v_start;
+	int display_v_end;
+	int active_hctl;
+	int active_h_start;
+	int active_h_end;
+	int active_v_start;
+	int active_v_end;
+	int ctrl_polarity;
+	int h_back_porch;
+	int h_front_porch;
+	int v_back_porch;
+	int v_front_porch;
+	int hsync_pulse_width;
+	int vsync_pulse_width;
+	int hsync_polarity;
+	int vsync_polarity;
+	int data_en_polarity;
+	int hsync_start_x;
+	int hsync_end_x;
+	uint8 *buf;
+	int bpp;
+	uint32 dma2_cfg_reg;
+	struct fb_info *fbi;
+	struct fb_var_screeninfo *var;
+	struct msm_fb_data_type *mfd;
+	uint32 dma_base;
+	uint32 timer_base = LCDC_BASE;
+	uint32 block = MDP_DMA2_BLOCK;
+	int ret;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	var = &fbi->var;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp + fbi->var.yoffset * fbi->fix.line_length;
+
+	dma2_cfg_reg = DMA_PACK_ALIGN_LSB | DMA_DITHER_EN | DMA_OUT_SEL_LCDC;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (bpp == 2)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+	else if (bpp == 3)
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB888;
+	else
+		dma2_cfg_reg |= DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888;
+
+	switch (mfd->panel_info.bpp) {
+	case 24:
+		dma2_cfg_reg |= DMA_DSTC0G_8BITS |
+		    DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
+		break;
+
+	case 18:
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+		break;
+
+	case 16:
+		dma2_cfg_reg |= DMA_DSTC0G_6BITS |
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+		break;
+
+	default:
+		printk(KERN_ERR "mdp lcdc can't support format %d bpp!\n",
+		       mfd->panel_info.bpp);
+		return -ENODEV;
+	}
+
+	/* DMA register config */
+
+	dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL)
+		dma_base = DMA_E_BASE;
+#endif
+
+	/* starting address */
+	MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+	/* active window width and height */
+	MDP_OUTP(MDP_BASE + dma_base + 0x4, ((fbi->var.yres) << 16) |
+						(fbi->var.xres));
+	/* buffer ystride */
+	MDP_OUTP(MDP_BASE + dma_base + 0xc, fbi->fix.line_length);
+	/* x/y coordinate = always 0 for lcdc */
+	MDP_OUTP(MDP_BASE + dma_base + 0x10, 0);
+	/* dma config */
+	MDP_OUTP(MDP_BASE + dma_base, dma2_cfg_reg);
+
+	/*
+	 * LCDC timing setting
+	 */
+	h_back_porch = var->left_margin;
+	h_front_porch = var->right_margin;
+	v_back_porch = var->upper_margin;
+	v_front_porch = var->lower_margin;
+	hsync_pulse_width = var->hsync_len;
+	vsync_pulse_width = var->vsync_len;
+	lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
+	lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
+	lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
+
+	lcdc_width = mfd->panel_info.xres;
+	lcdc_height = mfd->panel_info.yres;
+	lcdc_bpp = mfd->panel_info.bpp;
+
+	hsync_period =
+	    hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
+	hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
+	hsync_start_x = hsync_pulse_width + h_back_porch;
+	hsync_end_x = hsync_period - h_front_porch - 1;
+	display_hctl = (hsync_end_x << 16) | hsync_start_x;
+
+	vsync_period =
+	    (vsync_pulse_width + v_back_porch + lcdc_height +
+	     v_front_porch) * hsync_period;
+	display_v_start =
+	    (vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
+	display_v_end =
+	    vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
+
+	if (lcdc_width != var->xres) {
+		active_h_start = hsync_start_x + first_pixel_start_x;
+		active_h_end = active_h_start + var->xres - 1;
+		active_hctl =
+		    ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
+	} else {
+		active_hctl = 0;
+	}
+
+	if (lcdc_height != var->yres) {
+		active_v_start =
+		    display_v_start + first_pixel_start_y * hsync_period;
+		active_v_end = active_v_start + (var->yres) * hsync_period - 1;
+		active_v_start |= ACTIVE_START_Y_EN;
+	} else {
+		active_v_start = 0;
+		active_v_end = 0;
+	}
+
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		block = MDP_DMA_E_BLOCK;
+		timer_base = DTV_BASE;
+		hsync_polarity = 0;
+		vsync_polarity = 0;
+	} else {
+		hsync_polarity = 1;
+		vsync_polarity = 1;
+	}
+
+	lcdc_underflow_clr |= 0x80000000;	/* enable recovery */
+#else
+	hsync_polarity = 0;
+	vsync_polarity = 0;
+#endif
+	data_en_polarity = 0;
+
+	ctrl_polarity =
+	    (data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
+
+	MDP_OUTP(MDP_BASE + timer_base + 0x4, hsync_ctrl);
+	MDP_OUTP(MDP_BASE + timer_base + 0x8, vsync_period);
+	MDP_OUTP(MDP_BASE + timer_base + 0xc, vsync_pulse_width * hsync_period);
+	if (timer_base == LCDC_BASE) {
+		MDP_OUTP(MDP_BASE + timer_base + 0x10, display_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x14, display_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x18, display_v_end);
+		MDP_OUTP(MDP_BASE + timer_base + 0x28, lcdc_border_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x2c, lcdc_underflow_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x30, lcdc_hsync_skew);
+		MDP_OUTP(MDP_BASE + timer_base + 0x38, ctrl_polarity);
+		MDP_OUTP(MDP_BASE + timer_base + 0x1c, active_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x20, active_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x24, active_v_end);
+	} else {
+		MDP_OUTP(MDP_BASE + timer_base + 0x18, display_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x1c, display_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x20, display_v_end);
+		MDP_OUTP(MDP_BASE + timer_base + 0x40, lcdc_border_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x44, lcdc_underflow_clr);
+		MDP_OUTP(MDP_BASE + timer_base + 0x48, lcdc_hsync_skew);
+		MDP_OUTP(MDP_BASE + timer_base + 0x50, ctrl_polarity);
+		MDP_OUTP(MDP_BASE + timer_base + 0x2c, active_hctl);
+		MDP_OUTP(MDP_BASE + timer_base + 0x30, active_v_start);
+		MDP_OUTP(MDP_BASE + timer_base + 0x38, active_v_end);
+	}
+
+	ret = panel_next_on(pdev);
+	if (ret == 0) {
+		/* enable LCDC block */
+		MDP_OUTP(MDP_BASE + timer_base, 1);
+		mdp_pipe_ctrl(block, MDP_BLOCK_POWER_ON, FALSE);
+	}
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	return ret;
+}
+
+int mdp_lcdc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+	uint32 timer_base = LCDC_BASE;
+	uint32 block = MDP_DMA2_BLOCK;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		block = MDP_DMA_E_BLOCK;
+		timer_base = DTV_BASE;
+	}
+#endif
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + timer_base, 0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_ctrl(block, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_off(pdev);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	return ret;
+}
+
+void mdp_lcdc_update(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+	uint32 dma_base;
+	int irq_block = MDP_DMA2_TERM;
+#ifdef CONFIG_FB_MSM_MDP40
+	int intr = INTR_DMA_P_DONE;
+#endif
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since it's lcdc mode */
+
+	if (!mfd->ibuf.visible_swapped) {
+		bpp = fbi->var.bits_per_pixel / 8;
+		buf = (uint8 *) fbi->fix.smem_start;
+		buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+	} else {
+		/* we've done something to update the pointer. */
+		bpp =  mfd->ibuf.bpp;
+		buf = mfd->ibuf.buf;
+	}
+
+	dma_base = DMA_P_BASE;
+
+#ifdef CONFIG_FB_MSM_MDP40
+	if (mfd->panel.type == HDMI_PANEL) {
+		intr = INTR_DMA_E_DONE;
+		irq_block = MDP_DMA_E_TERM;
+		dma_base = DMA_E_BASE;
+	}
+#endif
+
+	/* starting address */
+	MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
+
+	/* enable LCDC irq */
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(irq_block);
+	INIT_COMPLETION(mfd->dma->comp);
+	mfd->dma->waiting = TRUE;
+#ifdef CONFIG_FB_MSM_MDP40
+	outp32(MDP_INTR_CLEAR, intr);
+	mdp_intr_mask |= intr;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#else
+	outp32(MDP_INTR_CLEAR, LCDC_FRAME_START);
+	mdp_intr_mask |= LCDC_FRAME_START;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+#endif
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	if (mfd->ibuf.vsync_enable)
+		wait_for_completion_killable(&mfd->dma->comp);
+	mdp_disable_irq(irq_block);
+}
diff --git a/drivers/staging/msm/mdp_dma_s.c b/drivers/staging/msm/mdp_dma_s.c
new file mode 100644
index 0000000..0c34a10
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_s.c
@@ -0,0 +1,139 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static void mdp_dma_s_update_lcd(struct msm_fb_data_type *mfd)
+{
+	MDPIBUF *iBuf = &mfd->ibuf;
+	int mddi_dest = FALSE;
+	uint32 outBpp = iBuf->bpp;
+	uint32 dma_s_cfg_reg;
+	uint8 *src;
+	struct msm_fb_panel_data *pdata =
+	    (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	dma_s_cfg_reg = DMA_PACK_TIGHT | DMA_PACK_ALIGN_LSB |
+	    DMA_OUT_SEL_AHB | DMA_IBUF_NONCONTIGUOUS;
+
+	if (mfd->fb_imgType == MDP_BGR_565)
+		dma_s_cfg_reg |= DMA_PACK_PATTERN_BGR;
+	else
+		dma_s_cfg_reg |= DMA_PACK_PATTERN_RGB;
+
+	if (outBpp == 4)
+		dma_s_cfg_reg |= DMA_IBUF_C3ALPHA_EN;
+
+	if (outBpp == 2)
+		dma_s_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
+
+	if (mfd->panel_info.pdest != DISPLAY_2) {
+		printk(KERN_ERR "error: non-secondary type through dma_s!\n");
+		return;
+	}
+
+	if (mfd->panel_info.type == MDDI_PANEL) {
+		dma_s_cfg_reg |= DMA_OUT_SEL_MDDI;
+		mddi_dest = TRUE;
+	} else {
+		dma_s_cfg_reg |= DMA_AHBM_LCD_SEL_SECONDARY;
+		outp32(MDP_EBI2_LCD1, mfd->data_port_phys);
+	}
+
+	dma_s_cfg_reg |= DMA_DITHER_EN;
+
+	src = (uint8 *) iBuf->buf;
+	/* starting input address */
+	src += (iBuf->dma_x + iBuf->dma_y * iBuf->ibuf_width) * outBpp;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	/* PIXELSIZE */
+	MDP_OUTP(MDP_BASE + 0xa0004, (iBuf->dma_h << 16 | iBuf->dma_w));
+	MDP_OUTP(MDP_BASE + 0xa0008, src);	/* ibuf address */
+	MDP_OUTP(MDP_BASE + 0xa000c, iBuf->ibuf_width * outBpp);/* ystride */
+
+	if (mfd->panel_info.bpp == 18) {
+		dma_s_cfg_reg |= DMA_DSTC0G_6BITS |	/* 666 18BPP */
+		    DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
+	} else {
+		dma_s_cfg_reg |= DMA_DSTC0G_6BITS |	/* 565 16BPP */
+		    DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
+	}
+
+	if (mddi_dest) {
+		MDP_OUTP(MDP_BASE + 0xa0010, (iBuf->dma_y << 16) | iBuf->dma_x);
+		MDP_OUTP(MDP_BASE + 0x00090, 1);
+		MDP_OUTP(MDP_BASE + 0x00094,
+				(MDDI_VDO_PACKET_DESC << 16) |
+				mfd->panel_info.mddi.vdopkt);
+	} else {
+		/* setting LCDC write window */
+		pdata->set_rect(iBuf->dma_x, iBuf->dma_y, iBuf->dma_w,
+				iBuf->dma_h);
+	}
+
+	MDP_OUTP(MDP_BASE + 0xa0000, dma_s_cfg_reg);
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	mdp_pipe_kickoff(MDP_DMA_S_TERM, mfd);
+}
+
+void mdp_dma_s_update(struct msm_fb_data_type *mfd)
+{
+	down(&mfd->dma->mutex);
+	if ((mfd) && (!mfd->dma->busy) && (mfd->panel_power_on)) {
+		down(&mfd->sem);
+		mdp_enable_irq(MDP_DMA_S_TERM);
+		mfd->dma->busy = TRUE;
+		INIT_COMPLETION(mfd->dma->comp);
+		mfd->ibuf_flushed = TRUE;
+		mdp_dma_s_update_lcd(mfd);
+		up(&mfd->sem);
+
+		/* wait until DMA finishes the current job */
+		wait_for_completion_killable(&mfd->dma->comp);
+		mdp_disable_irq(MDP_DMA_S_TERM);
+
+	/* signal if pan function is waiting for the update completion */
+		if (mfd->pan_waiting) {
+			mfd->pan_waiting = FALSE;
+			complete(&mfd->pan_comp);
+		}
+	}
+	up(&mfd->dma->mutex);
+}
diff --git a/drivers/staging/msm/mdp_dma_tv.c b/drivers/staging/msm/mdp_dma_tv.c
new file mode 100644
index 0000000..70989fb
--- /dev/null
+++ b/drivers/staging/msm/mdp_dma_tv.c
@@ -0,0 +1,142 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+#include <linux/fb.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+extern spinlock_t mdp_spin_lock;
+extern uint32 mdp_intr_mask;
+
+int mdp_dma3_on(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct fb_info *fbi;
+	uint8 *buf;
+	int bpp;
+	int ret = 0;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	fbi = mfd->fbi;
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+
+	/* starting address[31..8] of Video frame buffer is CS0 */
+	MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+	mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	MDP_OUTP(MDP_BASE + 0xC0004, 0x4c60674); /* flicker filter enabled */
+	MDP_OUTP(MDP_BASE + 0xC0010, 0x20);	/* sobel treshold */
+
+	MDP_OUTP(MDP_BASE + 0xC0018, 0xeb0010);	/* Y  Max, Y  min */
+	MDP_OUTP(MDP_BASE + 0xC001C, 0xf00010);	/* Cb Max, Cb min */
+	MDP_OUTP(MDP_BASE + 0xC0020, 0xf00010);	/* Cb Max, Cb min */
+
+	MDP_OUTP(MDP_BASE + 0xC000C, 0x67686970); /* add a few chars for CC */
+	MDP_OUTP(MDP_BASE + 0xC0000, 0x1);	/* MDP tv out enable */
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+int mdp_dma3_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+	if (ret)
+		return ret;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	MDP_OUTP(MDP_BASE + 0xC0000, 0x0);
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	mdp_pipe_ctrl(MDP_DMA3_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	/* delay to make sure the last frame finishes */
+	mdelay(100);
+
+	return ret;
+}
+
+void mdp_dma3_update(struct msm_fb_data_type *mfd)
+{
+	struct fb_info *fbi = mfd->fbi;
+	uint8 *buf;
+	int bpp;
+	unsigned long flag;
+
+	if (!mfd->panel_power_on)
+		return;
+
+	/* no need to power on cmd block since dma3 is running */
+	bpp = fbi->var.bits_per_pixel / 8;
+	buf = (uint8 *) fbi->fix.smem_start;
+	buf += fbi->var.xoffset * bpp +
+		fbi->var.yoffset * fbi->fix.line_length;
+	MDP_OUTP(MDP_BASE + 0xC0008, (uint32) buf >> 3);
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	mdp_enable_irq(MDP_DMA3_TERM);
+	INIT_COMPLETION(mfd->dma->comp);
+	mfd->dma->waiting = TRUE;
+
+	outp32(MDP_INTR_CLEAR, TV_OUT_DMA3_START);
+	mdp_intr_mask |= TV_OUT_DMA3_START;
+	outp32(MDP_INTR_ENABLE, mdp_intr_mask);
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	wait_for_completion_killable(&mfd->dma->comp);
+	mdp_disable_irq(MDP_DMA3_TERM);
+}
diff --git a/drivers/staging/msm/mdp_hw_init.c b/drivers/staging/msm/mdp_hw_init.c
new file mode 100644
index 0000000..807362a
--- /dev/null
+++ b/drivers/staging/msm/mdp_hw_init.c
@@ -0,0 +1,720 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+/* mdp primary csc limit vector */
+uint32 mdp_plv[] = { 0x10, 0xeb, 0x10, 0xf0 };
+
+/* Color Coefficient matrix for YUV -> RGB */
+struct mdp_ccs mdp_ccs_yuv2rgb = {
+	MDP_CCS_YUV2RGB,
+	{
+		0x254,
+		0x000,
+		0x331,
+		0x254,
+		0xff38,
+		0xfe61,
+		0x254,
+		0x409,
+		0x000,
+	},
+	{
+#ifdef CONFIG_FB_MSM_MDP31
+		0x1f0,
+		0x180,
+		0x180
+#else
+		0x10,
+		0x80,
+		0x80
+#endif
+	}
+};
+
+/* Color Coefficient matrix for RGB -> YUV */
+struct mdp_ccs mdp_ccs_rgb2yuv = {
+	MDP_CCS_RGB2YUV,
+	{
+		0x83,
+		0x102,
+		0x32,
+		0xffb5,
+		0xff6c,
+		0xe1,
+		0xe1,
+		0xff45,
+		0xffdc,
+	},
+#ifdef CONFIG_FB_MSM_MDP31
+	{
+		0x10,
+		0x80,
+		0x80
+	}
+#endif
+};
+
+static void mdp_load_lut_param(void)
+{
+	outpdw(MDP_BASE + 0x40800, 0x0);
+	outpdw(MDP_BASE + 0x40804, 0x151515);
+	outpdw(MDP_BASE + 0x40808, 0x1d1d1d);
+	outpdw(MDP_BASE + 0x4080c, 0x232323);
+	outpdw(MDP_BASE + 0x40810, 0x272727);
+	outpdw(MDP_BASE + 0x40814, 0x2b2b2b);
+	outpdw(MDP_BASE + 0x40818, 0x2f2f2f);
+	outpdw(MDP_BASE + 0x4081c, 0x333333);
+	outpdw(MDP_BASE + 0x40820, 0x363636);
+	outpdw(MDP_BASE + 0x40824, 0x393939);
+	outpdw(MDP_BASE + 0x40828, 0x3b3b3b);
+	outpdw(MDP_BASE + 0x4082c, 0x3e3e3e);
+	outpdw(MDP_BASE + 0x40830, 0x404040);
+	outpdw(MDP_BASE + 0x40834, 0x434343);
+	outpdw(MDP_BASE + 0x40838, 0x454545);
+	outpdw(MDP_BASE + 0x4083c, 0x474747);
+	outpdw(MDP_BASE + 0x40840, 0x494949);
+	outpdw(MDP_BASE + 0x40844, 0x4b4b4b);
+	outpdw(MDP_BASE + 0x40848, 0x4d4d4d);
+	outpdw(MDP_BASE + 0x4084c, 0x4f4f4f);
+	outpdw(MDP_BASE + 0x40850, 0x515151);
+	outpdw(MDP_BASE + 0x40854, 0x535353);
+	outpdw(MDP_BASE + 0x40858, 0x555555);
+	outpdw(MDP_BASE + 0x4085c, 0x565656);
+	outpdw(MDP_BASE + 0x40860, 0x585858);
+	outpdw(MDP_BASE + 0x40864, 0x5a5a5a);
+	outpdw(MDP_BASE + 0x40868, 0x5b5b5b);
+	outpdw(MDP_BASE + 0x4086c, 0x5d5d5d);
+	outpdw(MDP_BASE + 0x40870, 0x5e5e5e);
+	outpdw(MDP_BASE + 0x40874, 0x606060);
+	outpdw(MDP_BASE + 0x40878, 0x616161);
+	outpdw(MDP_BASE + 0x4087c, 0x636363);
+	outpdw(MDP_BASE + 0x40880, 0x646464);
+	outpdw(MDP_BASE + 0x40884, 0x666666);
+	outpdw(MDP_BASE + 0x40888, 0x676767);
+	outpdw(MDP_BASE + 0x4088c, 0x686868);
+	outpdw(MDP_BASE + 0x40890, 0x6a6a6a);
+	outpdw(MDP_BASE + 0x40894, 0x6b6b6b);
+	outpdw(MDP_BASE + 0x40898, 0x6c6c6c);
+	outpdw(MDP_BASE + 0x4089c, 0x6e6e6e);
+	outpdw(MDP_BASE + 0x408a0, 0x6f6f6f);
+	outpdw(MDP_BASE + 0x408a4, 0x707070);
+	outpdw(MDP_BASE + 0x408a8, 0x717171);
+	outpdw(MDP_BASE + 0x408ac, 0x727272);
+	outpdw(MDP_BASE + 0x408b0, 0x747474);
+	outpdw(MDP_BASE + 0x408b4, 0x757575);
+	outpdw(MDP_BASE + 0x408b8, 0x767676);
+	outpdw(MDP_BASE + 0x408bc, 0x777777);
+	outpdw(MDP_BASE + 0x408c0, 0x787878);
+	outpdw(MDP_BASE + 0x408c4, 0x797979);
+	outpdw(MDP_BASE + 0x408c8, 0x7a7a7a);
+	outpdw(MDP_BASE + 0x408cc, 0x7c7c7c);
+	outpdw(MDP_BASE + 0x408d0, 0x7d7d7d);
+	outpdw(MDP_BASE + 0x408d4, 0x7e7e7e);
+	outpdw(MDP_BASE + 0x408d8, 0x7f7f7f);
+	outpdw(MDP_BASE + 0x408dc, 0x808080);
+	outpdw(MDP_BASE + 0x408e0, 0x818181);
+	outpdw(MDP_BASE + 0x408e4, 0x828282);
+	outpdw(MDP_BASE + 0x408e8, 0x838383);
+	outpdw(MDP_BASE + 0x408ec, 0x848484);
+	outpdw(MDP_BASE + 0x408f0, 0x858585);
+	outpdw(MDP_BASE + 0x408f4, 0x868686);
+	outpdw(MDP_BASE + 0x408f8, 0x878787);
+	outpdw(MDP_BASE + 0x408fc, 0x888888);
+	outpdw(MDP_BASE + 0x40900, 0x898989);
+	outpdw(MDP_BASE + 0x40904, 0x8a8a8a);
+	outpdw(MDP_BASE + 0x40908, 0x8b8b8b);
+	outpdw(MDP_BASE + 0x4090c, 0x8c8c8c);
+	outpdw(MDP_BASE + 0x40910, 0x8d8d8d);
+	outpdw(MDP_BASE + 0x40914, 0x8e8e8e);
+	outpdw(MDP_BASE + 0x40918, 0x8f8f8f);
+	outpdw(MDP_BASE + 0x4091c, 0x8f8f8f);
+	outpdw(MDP_BASE + 0x40920, 0x909090);
+	outpdw(MDP_BASE + 0x40924, 0x919191);
+	outpdw(MDP_BASE + 0x40928, 0x929292);
+	outpdw(MDP_BASE + 0x4092c, 0x939393);
+	outpdw(MDP_BASE + 0x40930, 0x949494);
+	outpdw(MDP_BASE + 0x40934, 0x959595);
+	outpdw(MDP_BASE + 0x40938, 0x969696);
+	outpdw(MDP_BASE + 0x4093c, 0x969696);
+	outpdw(MDP_BASE + 0x40940, 0x979797);
+	outpdw(MDP_BASE + 0x40944, 0x989898);
+	outpdw(MDP_BASE + 0x40948, 0x999999);
+	outpdw(MDP_BASE + 0x4094c, 0x9a9a9a);
+	outpdw(MDP_BASE + 0x40950, 0x9b9b9b);
+	outpdw(MDP_BASE + 0x40954, 0x9c9c9c);
+	outpdw(MDP_BASE + 0x40958, 0x9c9c9c);
+	outpdw(MDP_BASE + 0x4095c, 0x9d9d9d);
+	outpdw(MDP_BASE + 0x40960, 0x9e9e9e);
+	outpdw(MDP_BASE + 0x40964, 0x9f9f9f);
+	outpdw(MDP_BASE + 0x40968, 0xa0a0a0);
+	outpdw(MDP_BASE + 0x4096c, 0xa0a0a0);
+	outpdw(MDP_BASE + 0x40970, 0xa1a1a1);
+	outpdw(MDP_BASE + 0x40974, 0xa2a2a2);
+	outpdw(MDP_BASE + 0x40978, 0xa3a3a3);
+	outpdw(MDP_BASE + 0x4097c, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40980, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40984, 0xa5a5a5);
+	outpdw(MDP_BASE + 0x40988, 0xa6a6a6);
+	outpdw(MDP_BASE + 0x4098c, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40990, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40994, 0xa8a8a8);
+	outpdw(MDP_BASE + 0x40998, 0xa9a9a9);
+	outpdw(MDP_BASE + 0x4099c, 0xaaaaaa);
+	outpdw(MDP_BASE + 0x409a0, 0xaaaaaa);
+	outpdw(MDP_BASE + 0x409a4, 0xababab);
+	outpdw(MDP_BASE + 0x409a8, 0xacacac);
+	outpdw(MDP_BASE + 0x409ac, 0xadadad);
+	outpdw(MDP_BASE + 0x409b0, 0xadadad);
+	outpdw(MDP_BASE + 0x409b4, 0xaeaeae);
+	outpdw(MDP_BASE + 0x409b8, 0xafafaf);
+	outpdw(MDP_BASE + 0x409bc, 0xafafaf);
+	outpdw(MDP_BASE + 0x409c0, 0xb0b0b0);
+	outpdw(MDP_BASE + 0x409c4, 0xb1b1b1);
+	outpdw(MDP_BASE + 0x409c8, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x409cc, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x409d0, 0xb3b3b3);
+	outpdw(MDP_BASE + 0x409d4, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x409d8, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x409dc, 0xb5b5b5);
+	outpdw(MDP_BASE + 0x409e0, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x409e4, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x409e8, 0xb7b7b7);
+	outpdw(MDP_BASE + 0x409ec, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x409f0, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x409f4, 0xb9b9b9);
+	outpdw(MDP_BASE + 0x409f8, 0xbababa);
+	outpdw(MDP_BASE + 0x409fc, 0xbababa);
+	outpdw(MDP_BASE + 0x40a00, 0xbbbbbb);
+	outpdw(MDP_BASE + 0x40a04, 0xbcbcbc);
+	outpdw(MDP_BASE + 0x40a08, 0xbcbcbc);
+	outpdw(MDP_BASE + 0x40a0c, 0xbdbdbd);
+	outpdw(MDP_BASE + 0x40a10, 0xbebebe);
+	outpdw(MDP_BASE + 0x40a14, 0xbebebe);
+	outpdw(MDP_BASE + 0x40a18, 0xbfbfbf);
+	outpdw(MDP_BASE + 0x40a1c, 0xc0c0c0);
+	outpdw(MDP_BASE + 0x40a20, 0xc0c0c0);
+	outpdw(MDP_BASE + 0x40a24, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40a28, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40a2c, 0xc2c2c2);
+	outpdw(MDP_BASE + 0x40a30, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40a34, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40a38, 0xc4c4c4);
+	outpdw(MDP_BASE + 0x40a3c, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40a40, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40a44, 0xc6c6c6);
+	outpdw(MDP_BASE + 0x40a48, 0xc6c6c6);
+	outpdw(MDP_BASE + 0x40a4c, 0xc7c7c7);
+	outpdw(MDP_BASE + 0x40a50, 0xc8c8c8);
+	outpdw(MDP_BASE + 0x40a54, 0xc8c8c8);
+	outpdw(MDP_BASE + 0x40a58, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40a5c, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40a60, 0xcacaca);
+	outpdw(MDP_BASE + 0x40a64, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40a68, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40a6c, 0xcccccc);
+	outpdw(MDP_BASE + 0x40a70, 0xcccccc);
+	outpdw(MDP_BASE + 0x40a74, 0xcdcdcd);
+	outpdw(MDP_BASE + 0x40a78, 0xcecece);
+	outpdw(MDP_BASE + 0x40a7c, 0xcecece);
+	outpdw(MDP_BASE + 0x40a80, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40a84, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40a88, 0xd0d0d0);
+	outpdw(MDP_BASE + 0x40a8c, 0xd0d0d0);
+	outpdw(MDP_BASE + 0x40a90, 0xd1d1d1);
+	outpdw(MDP_BASE + 0x40a94, 0xd2d2d2);
+	outpdw(MDP_BASE + 0x40a98, 0xd2d2d2);
+	outpdw(MDP_BASE + 0x40a9c, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40aa0, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40aa4, 0xd4d4d4);
+	outpdw(MDP_BASE + 0x40aa8, 0xd4d4d4);
+	outpdw(MDP_BASE + 0x40aac, 0xd5d5d5);
+	outpdw(MDP_BASE + 0x40ab0, 0xd6d6d6);
+	outpdw(MDP_BASE + 0x40ab4, 0xd6d6d6);
+	outpdw(MDP_BASE + 0x40ab8, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40abc, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40ac0, 0xd8d8d8);
+	outpdw(MDP_BASE + 0x40ac4, 0xd8d8d8);
+	outpdw(MDP_BASE + 0x40ac8, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40acc, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40ad0, 0xdadada);
+	outpdw(MDP_BASE + 0x40ad4, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40ad8, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40adc, 0xdcdcdc);
+	outpdw(MDP_BASE + 0x40ae0, 0xdcdcdc);
+	outpdw(MDP_BASE + 0x40ae4, 0xdddddd);
+	outpdw(MDP_BASE + 0x40ae8, 0xdddddd);
+	outpdw(MDP_BASE + 0x40aec, 0xdedede);
+	outpdw(MDP_BASE + 0x40af0, 0xdedede);
+	outpdw(MDP_BASE + 0x40af4, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40af8, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40afc, 0xe0e0e0);
+	outpdw(MDP_BASE + 0x40b00, 0xe0e0e0);
+	outpdw(MDP_BASE + 0x40b04, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40b08, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40b0c, 0xe2e2e2);
+	outpdw(MDP_BASE + 0x40b10, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40b14, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40b18, 0xe4e4e4);
+	outpdw(MDP_BASE + 0x40b1c, 0xe4e4e4);
+	outpdw(MDP_BASE + 0x40b20, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40b24, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40b28, 0xe6e6e6);
+	outpdw(MDP_BASE + 0x40b2c, 0xe6e6e6);
+	outpdw(MDP_BASE + 0x40b30, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40b34, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40b38, 0xe8e8e8);
+	outpdw(MDP_BASE + 0x40b3c, 0xe8e8e8);
+	outpdw(MDP_BASE + 0x40b40, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40b44, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40b48, 0xeaeaea);
+	outpdw(MDP_BASE + 0x40b4c, 0xeaeaea);
+	outpdw(MDP_BASE + 0x40b50, 0xebebeb);
+	outpdw(MDP_BASE + 0x40b54, 0xebebeb);
+	outpdw(MDP_BASE + 0x40b58, 0xececec);
+	outpdw(MDP_BASE + 0x40b5c, 0xececec);
+	outpdw(MDP_BASE + 0x40b60, 0xededed);
+	outpdw(MDP_BASE + 0x40b64, 0xededed);
+	outpdw(MDP_BASE + 0x40b68, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40b6c, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40b70, 0xefefef);
+	outpdw(MDP_BASE + 0x40b74, 0xefefef);
+	outpdw(MDP_BASE + 0x40b78, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40b7c, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40b80, 0xf1f1f1);
+	outpdw(MDP_BASE + 0x40b84, 0xf1f1f1);
+	outpdw(MDP_BASE + 0x40b88, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b8c, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b90, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40b94, 0xf3f3f3);
+	outpdw(MDP_BASE + 0x40b98, 0xf3f3f3);
+	outpdw(MDP_BASE + 0x40b9c, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40ba0, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40ba4, 0xf5f5f5);
+	outpdw(MDP_BASE + 0x40ba8, 0xf5f5f5);
+	outpdw(MDP_BASE + 0x40bac, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40bb0, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40bb4, 0xf7f7f7);
+	outpdw(MDP_BASE + 0x40bb8, 0xf7f7f7);
+	outpdw(MDP_BASE + 0x40bbc, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40bc0, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40bc4, 0xf9f9f9);
+	outpdw(MDP_BASE + 0x40bc8, 0xf9f9f9);
+	outpdw(MDP_BASE + 0x40bcc, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd0, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd4, 0xfafafa);
+	outpdw(MDP_BASE + 0x40bd8, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40bdc, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40be0, 0xfcfcfc);
+	outpdw(MDP_BASE + 0x40be4, 0xfcfcfc);
+	outpdw(MDP_BASE + 0x40be8, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40bec, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40bf0, 0xfefefe);
+	outpdw(MDP_BASE + 0x40bf4, 0xfefefe);
+	outpdw(MDP_BASE + 0x40bf8, 0xffffff);
+	outpdw(MDP_BASE + 0x40bfc, 0xffffff);
+	outpdw(MDP_BASE + 0x40c00, 0x0);
+	outpdw(MDP_BASE + 0x40c04, 0x0);
+	outpdw(MDP_BASE + 0x40c08, 0x0);
+	outpdw(MDP_BASE + 0x40c0c, 0x0);
+	outpdw(MDP_BASE + 0x40c10, 0x0);
+	outpdw(MDP_BASE + 0x40c14, 0x0);
+	outpdw(MDP_BASE + 0x40c18, 0x0);
+	outpdw(MDP_BASE + 0x40c1c, 0x0);
+	outpdw(MDP_BASE + 0x40c20, 0x0);
+	outpdw(MDP_BASE + 0x40c24, 0x0);
+	outpdw(MDP_BASE + 0x40c28, 0x0);
+	outpdw(MDP_BASE + 0x40c2c, 0x0);
+	outpdw(MDP_BASE + 0x40c30, 0x0);
+	outpdw(MDP_BASE + 0x40c34, 0x0);
+	outpdw(MDP_BASE + 0x40c38, 0x0);
+	outpdw(MDP_BASE + 0x40c3c, 0x0);
+	outpdw(MDP_BASE + 0x40c40, 0x10101);
+	outpdw(MDP_BASE + 0x40c44, 0x10101);
+	outpdw(MDP_BASE + 0x40c48, 0x10101);
+	outpdw(MDP_BASE + 0x40c4c, 0x10101);
+	outpdw(MDP_BASE + 0x40c50, 0x10101);
+	outpdw(MDP_BASE + 0x40c54, 0x10101);
+	outpdw(MDP_BASE + 0x40c58, 0x10101);
+	outpdw(MDP_BASE + 0x40c5c, 0x10101);
+	outpdw(MDP_BASE + 0x40c60, 0x10101);
+	outpdw(MDP_BASE + 0x40c64, 0x10101);
+	outpdw(MDP_BASE + 0x40c68, 0x20202);
+	outpdw(MDP_BASE + 0x40c6c, 0x20202);
+	outpdw(MDP_BASE + 0x40c70, 0x20202);
+	outpdw(MDP_BASE + 0x40c74, 0x20202);
+	outpdw(MDP_BASE + 0x40c78, 0x20202);
+	outpdw(MDP_BASE + 0x40c7c, 0x20202);
+	outpdw(MDP_BASE + 0x40c80, 0x30303);
+	outpdw(MDP_BASE + 0x40c84, 0x30303);
+	outpdw(MDP_BASE + 0x40c88, 0x30303);
+	outpdw(MDP_BASE + 0x40c8c, 0x30303);
+	outpdw(MDP_BASE + 0x40c90, 0x30303);
+	outpdw(MDP_BASE + 0x40c94, 0x40404);
+	outpdw(MDP_BASE + 0x40c98, 0x40404);
+	outpdw(MDP_BASE + 0x40c9c, 0x40404);
+	outpdw(MDP_BASE + 0x40ca0, 0x40404);
+	outpdw(MDP_BASE + 0x40ca4, 0x40404);
+	outpdw(MDP_BASE + 0x40ca8, 0x50505);
+	outpdw(MDP_BASE + 0x40cac, 0x50505);
+	outpdw(MDP_BASE + 0x40cb0, 0x50505);
+	outpdw(MDP_BASE + 0x40cb4, 0x50505);
+	outpdw(MDP_BASE + 0x40cb8, 0x60606);
+	outpdw(MDP_BASE + 0x40cbc, 0x60606);
+	outpdw(MDP_BASE + 0x40cc0, 0x60606);
+	outpdw(MDP_BASE + 0x40cc4, 0x70707);
+	outpdw(MDP_BASE + 0x40cc8, 0x70707);
+	outpdw(MDP_BASE + 0x40ccc, 0x70707);
+	outpdw(MDP_BASE + 0x40cd0, 0x70707);
+	outpdw(MDP_BASE + 0x40cd4, 0x80808);
+	outpdw(MDP_BASE + 0x40cd8, 0x80808);
+	outpdw(MDP_BASE + 0x40cdc, 0x80808);
+	outpdw(MDP_BASE + 0x40ce0, 0x90909);
+	outpdw(MDP_BASE + 0x40ce4, 0x90909);
+	outpdw(MDP_BASE + 0x40ce8, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cec, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cf0, 0xa0a0a);
+	outpdw(MDP_BASE + 0x40cf4, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40cf8, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40cfc, 0xb0b0b);
+	outpdw(MDP_BASE + 0x40d00, 0xc0c0c);
+	outpdw(MDP_BASE + 0x40d04, 0xc0c0c);
+	outpdw(MDP_BASE + 0x40d08, 0xd0d0d);
+	outpdw(MDP_BASE + 0x40d0c, 0xd0d0d);
+	outpdw(MDP_BASE + 0x40d10, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d14, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d18, 0xe0e0e);
+	outpdw(MDP_BASE + 0x40d1c, 0xf0f0f);
+	outpdw(MDP_BASE + 0x40d20, 0xf0f0f);
+	outpdw(MDP_BASE + 0x40d24, 0x101010);
+	outpdw(MDP_BASE + 0x40d28, 0x101010);
+	outpdw(MDP_BASE + 0x40d2c, 0x111111);
+	outpdw(MDP_BASE + 0x40d30, 0x111111);
+	outpdw(MDP_BASE + 0x40d34, 0x121212);
+	outpdw(MDP_BASE + 0x40d38, 0x121212);
+	outpdw(MDP_BASE + 0x40d3c, 0x131313);
+	outpdw(MDP_BASE + 0x40d40, 0x131313);
+	outpdw(MDP_BASE + 0x40d44, 0x141414);
+	outpdw(MDP_BASE + 0x40d48, 0x151515);
+	outpdw(MDP_BASE + 0x40d4c, 0x151515);
+	outpdw(MDP_BASE + 0x40d50, 0x161616);
+	outpdw(MDP_BASE + 0x40d54, 0x161616);
+	outpdw(MDP_BASE + 0x40d58, 0x171717);
+	outpdw(MDP_BASE + 0x40d5c, 0x171717);
+	outpdw(MDP_BASE + 0x40d60, 0x181818);
+	outpdw(MDP_BASE + 0x40d64, 0x191919);
+	outpdw(MDP_BASE + 0x40d68, 0x191919);
+	outpdw(MDP_BASE + 0x40d6c, 0x1a1a1a);
+	outpdw(MDP_BASE + 0x40d70, 0x1b1b1b);
+	outpdw(MDP_BASE + 0x40d74, 0x1b1b1b);
+	outpdw(MDP_BASE + 0x40d78, 0x1c1c1c);
+	outpdw(MDP_BASE + 0x40d7c, 0x1c1c1c);
+	outpdw(MDP_BASE + 0x40d80, 0x1d1d1d);
+	outpdw(MDP_BASE + 0x40d84, 0x1e1e1e);
+	outpdw(MDP_BASE + 0x40d88, 0x1f1f1f);
+	outpdw(MDP_BASE + 0x40d8c, 0x1f1f1f);
+	outpdw(MDP_BASE + 0x40d90, 0x202020);
+	outpdw(MDP_BASE + 0x40d94, 0x212121);
+	outpdw(MDP_BASE + 0x40d98, 0x212121);
+	outpdw(MDP_BASE + 0x40d9c, 0x222222);
+	outpdw(MDP_BASE + 0x40da0, 0x232323);
+	outpdw(MDP_BASE + 0x40da4, 0x242424);
+	outpdw(MDP_BASE + 0x40da8, 0x242424);
+	outpdw(MDP_BASE + 0x40dac, 0x252525);
+	outpdw(MDP_BASE + 0x40db0, 0x262626);
+	outpdw(MDP_BASE + 0x40db4, 0x272727);
+	outpdw(MDP_BASE + 0x40db8, 0x272727);
+	outpdw(MDP_BASE + 0x40dbc, 0x282828);
+	outpdw(MDP_BASE + 0x40dc0, 0x292929);
+	outpdw(MDP_BASE + 0x40dc4, 0x2a2a2a);
+	outpdw(MDP_BASE + 0x40dc8, 0x2b2b2b);
+	outpdw(MDP_BASE + 0x40dcc, 0x2c2c2c);
+	outpdw(MDP_BASE + 0x40dd0, 0x2c2c2c);
+	outpdw(MDP_BASE + 0x40dd4, 0x2d2d2d);
+	outpdw(MDP_BASE + 0x40dd8, 0x2e2e2e);
+	outpdw(MDP_BASE + 0x40ddc, 0x2f2f2f);
+	outpdw(MDP_BASE + 0x40de0, 0x303030);
+	outpdw(MDP_BASE + 0x40de4, 0x313131);
+	outpdw(MDP_BASE + 0x40de8, 0x323232);
+	outpdw(MDP_BASE + 0x40dec, 0x333333);
+	outpdw(MDP_BASE + 0x40df0, 0x333333);
+	outpdw(MDP_BASE + 0x40df4, 0x343434);
+	outpdw(MDP_BASE + 0x40df8, 0x353535);
+	outpdw(MDP_BASE + 0x40dfc, 0x363636);
+	outpdw(MDP_BASE + 0x40e00, 0x373737);
+	outpdw(MDP_BASE + 0x40e04, 0x383838);
+	outpdw(MDP_BASE + 0x40e08, 0x393939);
+	outpdw(MDP_BASE + 0x40e0c, 0x3a3a3a);
+	outpdw(MDP_BASE + 0x40e10, 0x3b3b3b);
+	outpdw(MDP_BASE + 0x40e14, 0x3c3c3c);
+	outpdw(MDP_BASE + 0x40e18, 0x3d3d3d);
+	outpdw(MDP_BASE + 0x40e1c, 0x3e3e3e);
+	outpdw(MDP_BASE + 0x40e20, 0x3f3f3f);
+	outpdw(MDP_BASE + 0x40e24, 0x404040);
+	outpdw(MDP_BASE + 0x40e28, 0x414141);
+	outpdw(MDP_BASE + 0x40e2c, 0x424242);
+	outpdw(MDP_BASE + 0x40e30, 0x434343);
+	outpdw(MDP_BASE + 0x40e34, 0x444444);
+	outpdw(MDP_BASE + 0x40e38, 0x464646);
+	outpdw(MDP_BASE + 0x40e3c, 0x474747);
+	outpdw(MDP_BASE + 0x40e40, 0x484848);
+	outpdw(MDP_BASE + 0x40e44, 0x494949);
+	outpdw(MDP_BASE + 0x40e48, 0x4a4a4a);
+	outpdw(MDP_BASE + 0x40e4c, 0x4b4b4b);
+	outpdw(MDP_BASE + 0x40e50, 0x4c4c4c);
+	outpdw(MDP_BASE + 0x40e54, 0x4d4d4d);
+	outpdw(MDP_BASE + 0x40e58, 0x4f4f4f);
+	outpdw(MDP_BASE + 0x40e5c, 0x505050);
+	outpdw(MDP_BASE + 0x40e60, 0x515151);
+	outpdw(MDP_BASE + 0x40e64, 0x525252);
+	outpdw(MDP_BASE + 0x40e68, 0x535353);
+	outpdw(MDP_BASE + 0x40e6c, 0x545454);
+	outpdw(MDP_BASE + 0x40e70, 0x565656);
+	outpdw(MDP_BASE + 0x40e74, 0x575757);
+	outpdw(MDP_BASE + 0x40e78, 0x585858);
+	outpdw(MDP_BASE + 0x40e7c, 0x595959);
+	outpdw(MDP_BASE + 0x40e80, 0x5b5b5b);
+	outpdw(MDP_BASE + 0x40e84, 0x5c5c5c);
+	outpdw(MDP_BASE + 0x40e88, 0x5d5d5d);
+	outpdw(MDP_BASE + 0x40e8c, 0x5e5e5e);
+	outpdw(MDP_BASE + 0x40e90, 0x606060);
+	outpdw(MDP_BASE + 0x40e94, 0x616161);
+	outpdw(MDP_BASE + 0x40e98, 0x626262);
+	outpdw(MDP_BASE + 0x40e9c, 0x646464);
+	outpdw(MDP_BASE + 0x40ea0, 0x656565);
+	outpdw(MDP_BASE + 0x40ea4, 0x666666);
+	outpdw(MDP_BASE + 0x40ea8, 0x686868);
+	outpdw(MDP_BASE + 0x40eac, 0x696969);
+	outpdw(MDP_BASE + 0x40eb0, 0x6a6a6a);
+	outpdw(MDP_BASE + 0x40eb4, 0x6c6c6c);
+	outpdw(MDP_BASE + 0x40eb8, 0x6d6d6d);
+	outpdw(MDP_BASE + 0x40ebc, 0x6f6f6f);
+	outpdw(MDP_BASE + 0x40ec0, 0x707070);
+	outpdw(MDP_BASE + 0x40ec4, 0x717171);
+	outpdw(MDP_BASE + 0x40ec8, 0x737373);
+	outpdw(MDP_BASE + 0x40ecc, 0x747474);
+	outpdw(MDP_BASE + 0x40ed0, 0x767676);
+	outpdw(MDP_BASE + 0x40ed4, 0x777777);
+	outpdw(MDP_BASE + 0x40ed8, 0x797979);
+	outpdw(MDP_BASE + 0x40edc, 0x7a7a7a);
+	outpdw(MDP_BASE + 0x40ee0, 0x7c7c7c);
+	outpdw(MDP_BASE + 0x40ee4, 0x7d7d7d);
+	outpdw(MDP_BASE + 0x40ee8, 0x7f7f7f);
+	outpdw(MDP_BASE + 0x40eec, 0x808080);
+	outpdw(MDP_BASE + 0x40ef0, 0x828282);
+	outpdw(MDP_BASE + 0x40ef4, 0x838383);
+	outpdw(MDP_BASE + 0x40ef8, 0x858585);
+	outpdw(MDP_BASE + 0x40efc, 0x868686);
+	outpdw(MDP_BASE + 0x40f00, 0x888888);
+	outpdw(MDP_BASE + 0x40f04, 0x898989);
+	outpdw(MDP_BASE + 0x40f08, 0x8b8b8b);
+	outpdw(MDP_BASE + 0x40f0c, 0x8d8d8d);
+	outpdw(MDP_BASE + 0x40f10, 0x8e8e8e);
+	outpdw(MDP_BASE + 0x40f14, 0x909090);
+	outpdw(MDP_BASE + 0x40f18, 0x919191);
+	outpdw(MDP_BASE + 0x40f1c, 0x939393);
+	outpdw(MDP_BASE + 0x40f20, 0x959595);
+	outpdw(MDP_BASE + 0x40f24, 0x969696);
+	outpdw(MDP_BASE + 0x40f28, 0x989898);
+	outpdw(MDP_BASE + 0x40f2c, 0x9a9a9a);
+	outpdw(MDP_BASE + 0x40f30, 0x9b9b9b);
+	outpdw(MDP_BASE + 0x40f34, 0x9d9d9d);
+	outpdw(MDP_BASE + 0x40f38, 0x9f9f9f);
+	outpdw(MDP_BASE + 0x40f3c, 0xa1a1a1);
+	outpdw(MDP_BASE + 0x40f40, 0xa2a2a2);
+	outpdw(MDP_BASE + 0x40f44, 0xa4a4a4);
+	outpdw(MDP_BASE + 0x40f48, 0xa6a6a6);
+	outpdw(MDP_BASE + 0x40f4c, 0xa7a7a7);
+	outpdw(MDP_BASE + 0x40f50, 0xa9a9a9);
+	outpdw(MDP_BASE + 0x40f54, 0xababab);
+	outpdw(MDP_BASE + 0x40f58, 0xadadad);
+	outpdw(MDP_BASE + 0x40f5c, 0xafafaf);
+	outpdw(MDP_BASE + 0x40f60, 0xb0b0b0);
+	outpdw(MDP_BASE + 0x40f64, 0xb2b2b2);
+	outpdw(MDP_BASE + 0x40f68, 0xb4b4b4);
+	outpdw(MDP_BASE + 0x40f6c, 0xb6b6b6);
+	outpdw(MDP_BASE + 0x40f70, 0xb8b8b8);
+	outpdw(MDP_BASE + 0x40f74, 0xbababa);
+	outpdw(MDP_BASE + 0x40f78, 0xbbbbbb);
+	outpdw(MDP_BASE + 0x40f7c, 0xbdbdbd);
+	outpdw(MDP_BASE + 0x40f80, 0xbfbfbf);
+	outpdw(MDP_BASE + 0x40f84, 0xc1c1c1);
+	outpdw(MDP_BASE + 0x40f88, 0xc3c3c3);
+	outpdw(MDP_BASE + 0x40f8c, 0xc5c5c5);
+	outpdw(MDP_BASE + 0x40f90, 0xc7c7c7);
+	outpdw(MDP_BASE + 0x40f94, 0xc9c9c9);
+	outpdw(MDP_BASE + 0x40f98, 0xcbcbcb);
+	outpdw(MDP_BASE + 0x40f9c, 0xcdcdcd);
+	outpdw(MDP_BASE + 0x40fa0, 0xcfcfcf);
+	outpdw(MDP_BASE + 0x40fa4, 0xd1d1d1);
+	outpdw(MDP_BASE + 0x40fa8, 0xd3d3d3);
+	outpdw(MDP_BASE + 0x40fac, 0xd5d5d5);
+	outpdw(MDP_BASE + 0x40fb0, 0xd7d7d7);
+	outpdw(MDP_BASE + 0x40fb4, 0xd9d9d9);
+	outpdw(MDP_BASE + 0x40fb8, 0xdbdbdb);
+	outpdw(MDP_BASE + 0x40fbc, 0xdddddd);
+	outpdw(MDP_BASE + 0x40fc0, 0xdfdfdf);
+	outpdw(MDP_BASE + 0x40fc4, 0xe1e1e1);
+	outpdw(MDP_BASE + 0x40fc8, 0xe3e3e3);
+	outpdw(MDP_BASE + 0x40fcc, 0xe5e5e5);
+	outpdw(MDP_BASE + 0x40fd0, 0xe7e7e7);
+	outpdw(MDP_BASE + 0x40fd4, 0xe9e9e9);
+	outpdw(MDP_BASE + 0x40fd8, 0xebebeb);
+	outpdw(MDP_BASE + 0x40fdc, 0xeeeeee);
+	outpdw(MDP_BASE + 0x40fe0, 0xf0f0f0);
+	outpdw(MDP_BASE + 0x40fe4, 0xf2f2f2);
+	outpdw(MDP_BASE + 0x40fe8, 0xf4f4f4);
+	outpdw(MDP_BASE + 0x40fec, 0xf6f6f6);
+	outpdw(MDP_BASE + 0x40ff0, 0xf8f8f8);
+	outpdw(MDP_BASE + 0x40ff4, 0xfbfbfb);
+	outpdw(MDP_BASE + 0x40ff8, 0xfdfdfd);
+	outpdw(MDP_BASE + 0x40ffc, 0xffffff);
+}
+
+#define   IRQ_EN_1__MDP_IRQ___M    0x00000800
+
+void mdp_hw_init(void)
+{
+	int i;
+
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	/* debug interface write access */
+	outpdw(MDP_BASE + 0x60, 1);
+
+	outp32(MDP_INTR_ENABLE, MDP_ANY_INTR_MASK);
+	outp32(MDP_EBI2_PORTMAP_MODE, 0x3);
+	outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01f8, 0x0);
+	outpdw(MDP_CMD_DEBUG_ACCESS_BASE + 0x01fc, 0x0);
+	outpdw(MDP_BASE + 0x60, 0x1);
+	mdp_load_lut_param();
+
+	/*
+	 * clear up unused fg/main registers
+	 */
+	/* comp.plane 2&3 ystride */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0120, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x012c, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0130, 0x0);
+	/* unpacked pattern */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0134, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0158, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x15c, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0160, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0170, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0174, 0x0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x017c, 0x0);
+
+	/* comp.plane 2 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0114, 0x0);
+	/* comp.plane 3 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0118, 0x0);
+
+	/* clear up unused bg registers */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c8, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d0, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01dc, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e0, 0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01e4, 0);
+
+#ifndef CONFIG_FB_MSM_MDP22
+	MDP_OUTP(MDP_BASE + 0xE0000, 0);
+	MDP_OUTP(MDP_BASE + 0x100, 0xffffffff);
+	MDP_OUTP(MDP_BASE + 0x90070, 0);
+	MDP_OUTP(MDP_BASE + 0x94010, 1);
+	MDP_OUTP(MDP_BASE + 0x9401c, 2);
+#endif
+
+	/*
+	 * limit vector
+	 * pre gets applied before color matrix conversion
+	 * post is after ccs
+	 */
+	writel(mdp_plv[0], MDP_CSC_PRE_LV1n(0));
+	writel(mdp_plv[1], MDP_CSC_PRE_LV1n(1));
+	writel(mdp_plv[2], MDP_CSC_PRE_LV1n(2));
+	writel(mdp_plv[3], MDP_CSC_PRE_LV1n(3));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	writel(mdp_plv[2], MDP_CSC_PRE_LV1n(4));
+	writel(mdp_plv[3], MDP_CSC_PRE_LV1n(5));
+
+	writel(0, MDP_CSC_POST_LV1n(0));
+	writel(0xff, MDP_CSC_POST_LV1n(1));
+	writel(0, MDP_CSC_POST_LV1n(2));
+	writel(0xff, MDP_CSC_POST_LV1n(3));
+	writel(0, MDP_CSC_POST_LV1n(4));
+	writel(0xff, MDP_CSC_POST_LV1n(5));
+
+	writel(0, MDP_CSC_PRE_LV2n(0));
+	writel(0xff, MDP_CSC_PRE_LV2n(1));
+	writel(0, MDP_CSC_PRE_LV2n(2));
+	writel(0xff, MDP_CSC_PRE_LV2n(3));
+	writel(0, MDP_CSC_PRE_LV2n(4));
+	writel(0xff, MDP_CSC_PRE_LV2n(5));
+
+	writel(mdp_plv[0], MDP_CSC_POST_LV2n(0));
+	writel(mdp_plv[1], MDP_CSC_POST_LV2n(1));
+	writel(mdp_plv[2], MDP_CSC_POST_LV2n(2));
+	writel(mdp_plv[3], MDP_CSC_POST_LV2n(3));
+	writel(mdp_plv[2], MDP_CSC_POST_LV2n(4));
+	writel(mdp_plv[3], MDP_CSC_POST_LV2n(5));
+#endif
+
+	/* primary forward matrix */
+	for (i = 0; i < MDP_CCS_SIZE; i++)
+		writel(mdp_ccs_rgb2yuv.ccs[i], MDP_CSC_PFMVn(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	for (i = 0; i < MDP_BV_SIZE; i++)
+		writel(mdp_ccs_rgb2yuv.bv[i], MDP_CSC_POST_BV2n(i));
+
+	writel(0, MDP_CSC_PRE_BV2n(0));
+	writel(0, MDP_CSC_PRE_BV2n(1));
+	writel(0, MDP_CSC_PRE_BV2n(2));
+#endif
+	/* primary reverse matrix */
+	for (i = 0; i < MDP_CCS_SIZE; i++)
+		writel(mdp_ccs_yuv2rgb.ccs[i], MDP_CSC_PRMVn(i));
+
+	for (i = 0; i < MDP_BV_SIZE; i++)
+		writel(mdp_ccs_yuv2rgb.bv[i], MDP_CSC_PRE_BV1n(i));
+
+#ifdef CONFIG_FB_MSM_MDP31
+	writel(0, MDP_CSC_POST_BV1n(0));
+	writel(0, MDP_CSC_POST_BV1n(1));
+	writel(0, MDP_CSC_POST_BV1n(2));
+
+	outpdw(MDP_BASE + 0x30010, 0x03e0);
+	outpdw(MDP_BASE + 0x30014, 0x0360);
+	outpdw(MDP_BASE + 0x30018, 0x0120);
+	outpdw(MDP_BASE + 0x3001c, 0x0140);
+#endif
+	mdp_init_scale_table();
+
+#ifndef CONFIG_FB_MSM_MDP31
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0104,
+		 ((16 << 6) << 16) | (16) << 6);
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+}
\ No newline at end of file
diff --git a/drivers/staging/msm/mdp_ppp.c b/drivers/staging/msm/mdp_ppp.c
new file mode 100644
index 0000000..c35a6ae
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp.c
@@ -0,0 +1,1502 @@
+/* drivers/video/msm/src/drv/mdp/mdp_ppp.c
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <msm_mdp.h>
+#include <linux/file.h>
+#include <linux/major.h>
+
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_IS_IMGTYPE_BAD(x) (((x) >= MDP_IMGTYPE_LIMIT) && \
+				(((x) < MDP_IMGTYPE2_START) || \
+				 ((x) >= MDP_IMGTYPE_LIMIT2)))
+
+static uint32_t bytes_per_pixel[] = {
+	[MDP_RGB_565] = 2,
+	[MDP_RGB_888] = 3,
+	[MDP_XRGB_8888] = 4,
+	[MDP_ARGB_8888] = 4,
+	[MDP_RGBA_8888] = 4,
+	[MDP_BGRA_8888] = 4,
+	[MDP_Y_CBCR_H2V1] = 1,
+	[MDP_Y_CBCR_H2V2] = 1,
+	[MDP_Y_CRCB_H2V1] = 1,
+	[MDP_Y_CRCB_H2V2] = 1,
+	[MDP_YCRYCB_H2V1] = 2,
+	[MDP_BGR_565] = 2
+};
+
+extern uint32 mdp_plv[];
+extern struct semaphore mdp_ppp_mutex;
+
+uint32_t mdp_get_bytes_per_pixel(uint32_t format)
+{
+	uint32_t bpp = 0;
+	if (format < ARRAY_SIZE(bytes_per_pixel))
+		bpp = bytes_per_pixel[format];
+
+	BUG_ON(!bpp);
+	return bpp;
+}
+
+static uint32 mdp_conv_matx_rgb2yuv(uint32 input_pixel,
+				    uint16 *matrix_and_bias_vector,
+				    uint32 *clamp_vector,
+				    uint32 *look_up_table)
+{
+	uint8 input_C2, input_C0, input_C1;
+	uint32 output;
+	int32 comp_C2, comp_C1, comp_C0, temp;
+	int32 temp1, temp2, temp3;
+	int32 matrix[9];
+	int32 bias_vector[3];
+	int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+	int32 i;
+	uint32 _is_lookup_table_enabled;
+
+	input_C2 = (input_pixel >> 16) & 0xFF;
+	input_C1 = (input_pixel >> 8) & 0xFF;
+	input_C0 = (input_pixel >> 0) & 0xFF;
+
+	comp_C0 = input_C0;
+	comp_C1 = input_C1;
+	comp_C2 = input_C2;
+
+	for (i = 0; i < 9; i++)
+		matrix[i] =
+		    ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+	bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+	bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+	bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+	Y_low_limit = (int32) clamp_vector[0];
+	Y_high_limit = (int32) clamp_vector[1];
+	C_low_limit = (int32) clamp_vector[2];
+	C_high_limit = (int32) clamp_vector[3];
+
+	if (look_up_table == 0)	/* check for NULL point */
+		_is_lookup_table_enabled = 0;
+	else
+		_is_lookup_table_enabled = 1;
+
+	if (_is_lookup_table_enabled == 1) {
+		comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+		comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+		comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+	}
+	/*
+	 * Color Conversion
+	 * reorder input colors
+	 */
+	temp = comp_C2;
+	comp_C2 = comp_C1;
+	comp_C1 = comp_C0;
+	comp_C0 = temp;
+
+	/* matrix multiplication */
+	temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+	temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+	temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+	comp_C0 = temp1 + 0x100;
+	comp_C1 = temp2 + 0x100;
+	comp_C2 = temp3 + 0x100;
+
+	/* take interger part */
+	comp_C0 >>= 9;
+	comp_C1 >>= 9;
+	comp_C2 >>= 9;
+
+	/* post bias (+) */
+	comp_C0 += bias_vector[0];
+	comp_C1 += bias_vector[1];
+	comp_C2 += bias_vector[2];
+
+	/* limit pixel to 8-bit */
+	if (comp_C0 < 0)
+		comp_C0 = 0;
+
+	if (comp_C0 > 255)
+		comp_C0 = 255;
+
+	if (comp_C1 < 0)
+		comp_C1 = 0;
+
+	if (comp_C1 > 255)
+		comp_C1 = 255;
+
+	if (comp_C2 < 0)
+		comp_C2 = 0;
+
+	if (comp_C2 > 255)
+		comp_C2 = 255;
+
+	/* clamp */
+	if (comp_C0 < Y_low_limit)
+		comp_C0 = Y_low_limit;
+
+	if (comp_C0 > Y_high_limit)
+		comp_C0 = Y_high_limit;
+
+	if (comp_C1 < C_low_limit)
+		comp_C1 = C_low_limit;
+
+	if (comp_C1 > C_high_limit)
+		comp_C1 = C_high_limit;
+
+	if (comp_C2 < C_low_limit)
+		comp_C2 = C_low_limit;
+
+	if (comp_C2 > C_high_limit)
+		comp_C2 = C_high_limit;
+
+	output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+	return output;
+}
+
+uint32 mdp_conv_matx_yuv2rgb(uint32 input_pixel,
+			     uint16 *matrix_and_bias_vector,
+			     uint32 *clamp_vector, uint32 *look_up_table)
+{
+	uint8 input_C2, input_C0, input_C1;
+	uint32 output;
+	int32 comp_C2, comp_C1, comp_C0, temp;
+	int32 temp1, temp2, temp3;
+	int32 matrix[9];
+	int32 bias_vector[3];
+	int32 Y_low_limit, Y_high_limit, C_low_limit, C_high_limit;
+	int32 i;
+	uint32 _is_lookup_table_enabled;
+
+	input_C2 = (input_pixel >> 16) & 0xFF;
+	input_C1 = (input_pixel >> 8) & 0xFF;
+	input_C0 = (input_pixel >> 0) & 0xFF;
+
+	comp_C0 = input_C0;
+	comp_C1 = input_C1;
+	comp_C2 = input_C2;
+
+	for (i = 0; i < 9; i++)
+		matrix[i] =
+		    ((int32) (((int32) matrix_and_bias_vector[i]) << 20)) >> 20;
+
+	bias_vector[0] = (int32) (matrix_and_bias_vector[9] & 0xFF);
+	bias_vector[1] = (int32) (matrix_and_bias_vector[10] & 0xFF);
+	bias_vector[2] = (int32) (matrix_and_bias_vector[11] & 0xFF);
+
+	Y_low_limit = (int32) clamp_vector[0];
+	Y_high_limit = (int32) clamp_vector[1];
+	C_low_limit = (int32) clamp_vector[2];
+	C_high_limit = (int32) clamp_vector[3];
+
+	if (look_up_table == 0)	/* check for NULL point */
+		_is_lookup_table_enabled = 0;
+	else
+		_is_lookup_table_enabled = 1;
+
+	/* clamp */
+	if (comp_C0 < Y_low_limit)
+		comp_C0 = Y_low_limit;
+
+	if (comp_C0 > Y_high_limit)
+		comp_C0 = Y_high_limit;
+
+	if (comp_C1 < C_low_limit)
+		comp_C1 = C_low_limit;
+
+	if (comp_C1 > C_high_limit)
+		comp_C1 = C_high_limit;
+
+	if (comp_C2 < C_low_limit)
+		comp_C2 = C_low_limit;
+
+	if (comp_C2 > C_high_limit)
+		comp_C2 = C_high_limit;
+
+	/*
+	 * Color Conversion
+	 * pre bias (-)
+	 */
+	comp_C0 -= bias_vector[0];
+	comp_C1 -= bias_vector[1];
+	comp_C2 -= bias_vector[2];
+
+	/* matrix multiplication */
+	temp1 = comp_C0 * matrix[0] + comp_C1 * matrix[1] + comp_C2 * matrix[2];
+	temp2 = comp_C0 * matrix[3] + comp_C1 * matrix[4] + comp_C2 * matrix[5];
+	temp3 = comp_C0 * matrix[6] + comp_C1 * matrix[7] + comp_C2 * matrix[8];
+
+	comp_C0 = temp1 + 0x100;
+	comp_C1 = temp2 + 0x100;
+	comp_C2 = temp3 + 0x100;
+
+	/* take interger part */
+	comp_C0 >>= 9;
+	comp_C1 >>= 9;
+	comp_C2 >>= 9;
+
+	/* reorder output colors */
+	temp = comp_C0;
+	comp_C0 = comp_C1;
+	comp_C1 = comp_C2;
+	comp_C2 = temp;
+
+	/* limit pixel to 8-bit */
+	if (comp_C0 < 0)
+		comp_C0 = 0;
+
+	if (comp_C0 > 255)
+		comp_C0 = 255;
+
+	if (comp_C1 < 0)
+		comp_C1 = 0;
+
+	if (comp_C1 > 255)
+		comp_C1 = 255;
+
+	if (comp_C2 < 0)
+		comp_C2 = 0;
+
+	if (comp_C2 > 255)
+		comp_C2 = 255;
+
+	/* Look-up table */
+	if (_is_lookup_table_enabled == 1) {
+		comp_C2 = (look_up_table[comp_C2] >> 16) & 0xFF;
+		comp_C1 = (look_up_table[comp_C1] >> 8) & 0xFF;
+		comp_C0 = (look_up_table[comp_C0] >> 0) & 0xFF;
+	}
+
+	output = (comp_C2 << 16) | (comp_C1 << 8) | comp_C0;
+	return output;
+}
+
+static uint32 mdp_calc_tpval(MDPIMG *mdpImg)
+{
+	uint32 tpVal;
+	uint8 plane_tp;
+
+	tpVal = 0;
+	if ((mdpImg->imgType == MDP_RGB_565)
+	    || (mdpImg->imgType == MDP_BGR_565)) {
+		/*
+		 * transparent color conversion into 24 bpp
+		 *
+		 * C2R_8BIT
+		 * left shift the entire bit and or it with the upper most bits
+		 */
+		plane_tp = (uint8) ((mdpImg->tpVal & 0xF800) >> 11);
+		tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 16;
+
+		/* C1B_8BIT */
+		plane_tp = (uint8) (mdpImg->tpVal & 0x1F);
+		tpVal |= ((plane_tp << 3) | ((plane_tp & 0x1C) >> 2)) << 8;
+
+		/* C0G_8BIT */
+		plane_tp = (uint8) ((mdpImg->tpVal & 0x7E0) >> 5);
+		tpVal |= ((plane_tp << 2) | ((plane_tp & 0x30) >> 4));
+	} else {
+		/* 24bit RGB to RBG conversion */
+
+		tpVal = (mdpImg->tpVal & 0xFF00) >> 8;
+		tpVal |= (mdpImg->tpVal & 0xFF) << 8;
+		tpVal |= (mdpImg->tpVal & 0xFF0000);
+	}
+
+	return tpVal;
+}
+
+static uint8 *mdp_get_chroma_addr(MDPIBUF *iBuf)
+{
+	uint8 *dest1;
+
+	dest1 = NULL;
+	switch (iBuf->ibuf_type) {
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		dest1 = (uint8 *) iBuf->buf;
+		dest1 += iBuf->ibuf_width * iBuf->ibuf_height * iBuf->bpp;
+		break;
+
+	default:
+		break;
+	}
+
+	return dest1;
+}
+
+static void mdp_ppp_setbg(MDPIBUF *iBuf)
+{
+	uint8 *bg0_addr;
+	uint8 *bg1_addr;
+	uint32 bg0_ystride, bg1_ystride;
+	uint32 ppp_src_cfg_reg, unpack_pattern;
+	int v_slice, h_slice;
+
+	v_slice = h_slice = 1;
+	bg0_addr = (uint8 *) iBuf->buf;
+	bg1_addr = mdp_get_chroma_addr(iBuf);
+
+	bg0_ystride = iBuf->ibuf_width * iBuf->bpp;
+	bg1_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+	switch (iBuf->ibuf_type) {
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+		/* 888 = 3bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+			PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->ibuf_type == MDP_RGB_565)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+		break;
+
+	case MDP_RGB_888:
+		/*
+		 * 888 = 3bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+		PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+		PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+		PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		unpack_pattern =
+		    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		break;
+
+	case MDP_BGRA_8888:
+	case MDP_RGBA_8888:
+	case MDP_ARGB_8888:
+	case MDP_XRGB_8888:
+		/*
+		 * 8888 = 4bytes
+		 * ARGB = 4Components
+		 * ARGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+		PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS | PPP_SRC_C3_ALPHA_EN |
+		PPP_SRC_BPP_INTERLVD_4BYTES | PPP_SRC_INTERLVD_4COMPONENTS |
+		PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB |
+		PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->ibuf_type == MDP_BGRA_8888)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->ibuf_type == MDP_RGBA_8888)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		v_slice = h_slice = 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_4COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+		unpack_pattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+		h_slice = 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			unpack_pattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		h_slice = 2;
+		break;
+
+	default:
+		return;
+	}
+
+	/* starting input address adjustment */
+	mdp_adjust_start_addr(&bg0_addr, &bg1_addr, v_slice, h_slice,
+			      iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+			      iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+			      iBuf, 1);
+
+	/*
+	 * 0x01c0: background plane 0 addr
+	 * 0x01c4: background plane 1 addr
+	 * 0x01c8: background plane 2 addr
+	 * 0x01cc: bg y stride for plane 0 and 1
+	 * 0x01d0: bg y stride for plane 2
+	 * 0x01d4: bg src PPP config
+	 * 0x01d8: unpack pattern
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c0, bg0_addr);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01c4, bg1_addr);
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01cc,
+		 (bg1_ystride << 16) | bg0_ystride);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d4, ppp_src_cfg_reg);
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01d8, unpack_pattern);
+}
+
+#define IS_PSEUDOPLNR(img) ((img == MDP_Y_CRCB_H2V2) | \
+				(img == MDP_Y_CBCR_H2V2) | \
+				(img == MDP_Y_CRCB_H2V1) | \
+				(img == MDP_Y_CBCR_H2V1))
+
+#define IMG_LEN(rect_h, w, rect_w, bpp) (((rect_h) * w) * bpp)
+
+#define Y_TO_CRCB_RATIO(format) \
+	((format == MDP_Y_CBCR_H2V2 || format == MDP_Y_CRCB_H2V2) ?  2 :\
+	(format == MDP_Y_CBCR_H2V1 || format == MDP_Y_CRCB_H2V1) ?  1 : 1)
+
+static void get_len(struct mdp_img *img, struct mdp_rect *rect, uint32_t bpp,
+			uint32_t *len0, uint32_t *len1)
+{
+	*len0 = IMG_LEN(rect->h, img->width, rect->w, bpp);
+	if (IS_PSEUDOPLNR(img->format))
+		*len1 = *len0/Y_TO_CRCB_RATIO(img->format);
+	else
+		*len1 = 0;
+}
+
+static void flush_imgs(struct mdp_blit_req *req, int src_bpp, int dst_bpp,
+			struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+	uint32_t src0_len, src1_len, dst0_len, dst1_len;
+
+	/* flush src images to memory before dma to mdp */
+	get_len(&req->src, &req->src_rect, src_bpp,
+	&src0_len, &src1_len);
+
+	flush_pmem_file(p_src_file,
+	req->src.offset, src0_len);
+
+	if (IS_PSEUDOPLNR(req->src.format))
+		flush_pmem_file(p_src_file,
+			req->src.offset + src0_len, src1_len);
+
+	get_len(&req->dst, &req->dst_rect, dst_bpp, &dst0_len, &dst1_len);
+	flush_pmem_file(p_dst_file, req->dst.offset, dst0_len);
+
+	if (IS_PSEUDOPLNR(req->dst.format))
+		flush_pmem_file(p_dst_file,
+			req->dst.offset + dst0_len, dst1_len);
+#endif
+}
+
+static void mdp_start_ppp(struct msm_fb_data_type *mfd, MDPIBUF *iBuf,
+struct mdp_blit_req *req, struct file *p_src_file, struct file *p_dst_file)
+{
+	uint8 *src0, *src1;
+	uint8 *dest0, *dest1;
+	uint16 inpBpp;
+	uint32 dest0_ystride;
+	uint32 src_width;
+	uint32 src_height;
+	uint32 src0_ystride;
+	uint32 dst_roi_width;
+	uint32 dst_roi_height;
+	uint32 ppp_src_cfg_reg, ppp_operation_reg, ppp_dst_cfg_reg;
+	uint32 alpha, tpVal;
+	uint32 packPattern;
+	uint32 dst_packPattern;
+	boolean inputRGB, outputRGB, pseudoplanr_output;
+	int sv_slice, sh_slice;
+	int dv_slice, dh_slice;
+	boolean perPixelAlpha = FALSE;
+	boolean ppp_lookUp_enable = FALSE;
+
+	sv_slice = sh_slice = dv_slice = dh_slice = 1;
+	alpha = tpVal = 0;
+	src_width = iBuf->mdpImg.width;
+	src_height = iBuf->roi.y + iBuf->roi.height;
+	src1 = NULL;
+	dest1 = NULL;
+
+	inputRGB = outputRGB = TRUE;
+	pseudoplanr_output = FALSE;
+	ppp_operation_reg = 0;
+	ppp_dst_cfg_reg = 0;
+	ppp_src_cfg_reg = 0;
+
+	/* Wait for the pipe to clear */
+	do { } while (mdp_ppp_pipe_wait() <= 0);
+
+	/*
+	 * destination config
+	 */
+	switch (iBuf->ibuf_type) {
+	case MDP_RGB_888:
+		dst_packPattern =
+		    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		ppp_dst_cfg_reg =
+		    PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT | PPP_DST_C2R_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_3ELEM | PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB | PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_3BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+
+	case MDP_XRGB_8888:
+	case MDP_ARGB_8888:
+	case MDP_RGBA_8888:
+		if (iBuf->ibuf_type == MDP_BGRA_8888)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->ibuf_type == MDP_RGBA_8888)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C2R_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_C3ALPHA_EN |
+		    PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_4BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V2)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+		    PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_420;
+		outputRGB = FALSE;
+		pseudoplanr_output = TRUE;
+		/*
+		 * vertically (y direction) and horizontally (x direction)
+		 * sample reduction by 2
+		 */
+
+		/*
+		 * H2V2(YUV420) Cosite
+		 *
+		 * Y    Y    Y    Y
+		 * CbCr      CbCr
+		 * Y    Y    Y    Y
+		 * Y    Y    Y    Y
+		 * CbCr      CbCr
+		 * Y    Y    Y    Y
+		 */
+		dv_slice = dh_slice = 2;
+
+		/* (x,y) and (width,height) must be even numbern */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+		iBuf->roi.lcd_y = (iBuf->roi.lcd_y / 2) * 2;
+		iBuf->roi.dst_height = (iBuf->roi.dst_height / 2) * 2;
+		iBuf->roi.y = (iBuf->roi.y / 2) * 2;
+		iBuf->roi.height = (iBuf->roi.height / 2) * 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		dst_packPattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+		ppp_dst_cfg_reg =
+		    PPP_DST_C2R_8BIT | PPP_DST_C0G_8BIT | PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT | PPP_DST_PACKET_CNT_INTERLVD_4ELEM |
+		    PPP_DST_PACK_TIGHT | PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES |
+		    PPP_DST_PLANE_INTERLVD;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+		outputRGB = FALSE;
+		/*
+		 * horizontally (x direction) sample reduction by 2
+		 *
+		 * H2V1(YUV422) Cosite
+		 *
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 * YCbCr    Y    YCbCr    Y
+		 */
+		dh_slice = 2;
+
+		/*
+		 * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+		 * preloaded gamma setting of 2.2 when the content is
+		 * non-linear ppp_lookUp_enable = TRUE;
+		 */
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		if (iBuf->ibuf_type == MDP_Y_CBCR_H2V1)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C2R_8BIT |
+		    PPP_DST_C0G_8BIT |
+		    PPP_DST_C1B_8BIT |
+		    PPP_DST_C3A_8BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_2ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI | PPP_DST_BPP_2BYTES;
+
+		ppp_operation_reg |= PPP_OP_DST_CHROMA_H2V1;
+		outputRGB = FALSE;
+		pseudoplanr_output = TRUE;
+		/* horizontally (x direction) sample reduction by 2 */
+		dh_slice = 2;
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+		break;
+
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+	default:
+		if (iBuf->ibuf_type == MDP_RGB_565)
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			dst_packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+		ppp_dst_cfg_reg = PPP_DST_C0G_6BIT |
+		    PPP_DST_C1B_5BIT |
+		    PPP_DST_C2R_5BIT |
+		    PPP_DST_PACKET_CNT_INTERLVD_3ELEM |
+		    PPP_DST_PACK_TIGHT |
+		    PPP_DST_PACK_ALIGN_LSB |
+		    PPP_DST_OUT_SEL_AXI |
+		    PPP_DST_BPP_2BYTES | PPP_DST_PLANE_INTERLVD;
+		break;
+	}
+
+	/* source config */
+	switch (iBuf->mdpImg.imgType) {
+	case MDP_RGB_888:
+		inpBpp = 3;
+		/*
+		 * 565 = 2bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_3BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		packPattern = MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	case MDP_BGRA_8888:
+	case MDP_RGBA_8888:
+	case MDP_ARGB_8888:
+		perPixelAlpha = TRUE;
+	case MDP_XRGB_8888:
+		inpBpp = 4;
+		/*
+		 * 8888 = 4bytes
+		 * ARGB = 4Components
+		 * ARGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_C3A_8BITS |
+			PPP_SRC_C3_ALPHA_EN | PPP_SRC_BPP_INTERLVD_4BYTES |
+			PPP_SRC_INTERLVD_4COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->mdpImg.imgType == MDP_BGRA_8888)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+		else if (iBuf->mdpImg.imgType == MDP_RGBA_8888)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_B, CLR_G, CLR_R,
+						 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(CLR_ALPHA, CLR_R, CLR_G, CLR_B,
+						 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		inpBpp = 1;
+		src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+		/*
+		 * CbCr = 2bytes
+		 * CbCr = 2Components
+		 * Y+CbCr
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS | PPP_SRC_C0G_8BITS |
+			PPP_SRC_C1B_8BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_2COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->mdpImg.imgType == MDP_Y_CRCB_H2V2)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_YCBCR |
+		    PPP_OP_SRC_CHROMA_420 |
+		    PPP_OP_SRC_CHROMA_COSITE |
+		    PPP_OP_DST_CHROMA_RGB | PPP_OP_DST_CHROMA_COSITE;
+
+		inputRGB = FALSE;
+		sh_slice = sv_slice = 2;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		inpBpp = 2;
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_4COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT | PPP_SRC_UNPACK_ALIGN_LSB;
+
+		packPattern =
+		    MDP_GET_PACK_PATTERN(CLR_Y, CLR_CR, CLR_Y, CLR_CB, 8);
+
+		ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+		    PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+
+		/*
+		 * if it's TV-Out/MDP_YCRYCB_H2V1, let's go through the
+		 * preloaded inverse gamma setting of 2.2 since they're
+		 * symetric when the content is non-linear
+		 * ppp_lookUp_enable = TRUE;
+		 */
+
+		/* x and width must be even number */
+		iBuf->roi.lcd_x = (iBuf->roi.lcd_x / 2) * 2;
+		iBuf->roi.dst_width = (iBuf->roi.dst_width / 2) * 2;
+		iBuf->roi.x = (iBuf->roi.x / 2) * 2;
+		iBuf->roi.width = (iBuf->roi.width / 2) * 2;
+
+		inputRGB = FALSE;
+		sh_slice = 2;
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+		inpBpp = 1;
+		src1 = (uint8 *) iBuf->mdpImg.cbcr_addr;
+
+		ppp_src_cfg_reg = PPP_SRC_C2R_8BITS |
+		    PPP_SRC_C0G_8BITS |
+		    PPP_SRC_C1B_8BITS |
+		    PPP_SRC_C3A_8BITS |
+		    PPP_SRC_BPP_INTERLVD_2BYTES |
+		    PPP_SRC_INTERLVD_2COMPONENTS |
+		    PPP_SRC_UNPACK_TIGHT |
+		    PPP_SRC_UNPACK_ALIGN_LSB | PPP_SRC_FETCH_PLANES_PSEUDOPLNR;
+
+		if (iBuf->mdpImg.imgType == MDP_Y_CBCR_H2V1)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CB, CLR_CR, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, 0, CLR_CR, CLR_CB, 8);
+
+		ppp_operation_reg |= PPP_OP_SRC_CHROMA_H2V1 |
+		    PPP_OP_SRC_CHROMA_COSITE | PPP_OP_DST_CHROMA_COSITE;
+		inputRGB = FALSE;
+		sh_slice = 2;
+		break;
+
+	case MDP_BGR_565:
+	case MDP_RGB_565:
+	default:
+		inpBpp = 2;
+		/*
+		 * 565 = 2bytes
+		 * RGB = 3Components
+		 * RGB interleaved
+		 */
+		ppp_src_cfg_reg = PPP_SRC_C2R_5BITS | PPP_SRC_C0G_6BITS |
+			PPP_SRC_C1B_5BITS | PPP_SRC_BPP_INTERLVD_2BYTES |
+			PPP_SRC_INTERLVD_3COMPONENTS | PPP_SRC_UNPACK_TIGHT |
+			PPP_SRC_UNPACK_ALIGN_LSB |
+			PPP_SRC_FETCH_PLANES_INTERLVD;
+
+		if (iBuf->mdpImg.imgType == MDP_RGB_565)
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_R, CLR_G, CLR_B, 8);
+		else
+			packPattern =
+			    MDP_GET_PACK_PATTERN(0, CLR_B, CLR_G, CLR_R, 8);
+
+		ppp_operation_reg |= PPP_OP_COLOR_SPACE_RGB |
+		    PPP_OP_SRC_CHROMA_RGB | PPP_OP_DST_CHROMA_RGB;
+		break;
+
+	}
+
+	if (pseudoplanr_output)
+		ppp_dst_cfg_reg |= PPP_DST_PLANE_PSEUDOPLN;
+
+	/* YCbCr to RGB color conversion flag */
+	if ((!inputRGB) && (outputRGB)) {
+		ppp_operation_reg |= PPP_OP_CONVERT_YCBCR2RGB |
+		    PPP_OP_CONVERT_ON;
+
+		/*
+		 * primary/secondary is sort of misleading term...but
+		 * in mdp2.2/3.0 we only use primary matrix (forward/rev)
+		 * in mdp3.1 we use set1(prim) and set2(secd)
+		 */
+#ifdef CONFIG_FB_MSM_MDP31
+		ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_SECONDARY |
+					PPP_OP_DST_RGB;
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0);
+#endif
+
+		if (ppp_lookUp_enable) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+			    PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+		}
+	}
+	/* RGB to YCbCr color conversion flag */
+	if ((inputRGB) && (!outputRGB)) {
+		ppp_operation_reg |= PPP_OP_CONVERT_RGB2YCBCR |
+		    PPP_OP_CONVERT_ON;
+
+#ifdef CONFIG_FB_MSM_MDP31
+		ppp_operation_reg |= PPP_OP_CONVERT_MATRIX_PRIMARY |
+					PPP_OP_DST_YCBCR;
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0240, 0x1e);
+#endif
+
+		if (ppp_lookUp_enable) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON |
+			    PPP_OP_LUT_C1_ON | PPP_OP_LUT_C2_ON;
+		}
+	}
+	/* YCbCr to YCbCr color conversion flag */
+	if ((!inputRGB) && (!outputRGB)) {
+		if ((ppp_lookUp_enable) &&
+		    (iBuf->mdpImg.imgType != iBuf->ibuf_type)) {
+			ppp_operation_reg |= PPP_OP_LUT_C0_ON;
+		}
+	}
+
+	ppp_src_cfg_reg |= (iBuf->roi.x % 2) ? PPP_SRC_BPP_ROI_ODD_X : 0;
+	ppp_src_cfg_reg |= (iBuf->roi.y % 2) ? PPP_SRC_BPP_ROI_ODD_Y : 0;
+
+	if (req->flags & MDP_DEINTERLACE)
+		ppp_operation_reg |= PPP_OP_DEINT_EN;
+
+	/* Dither at DMA side only since iBuf format is RGB888 */
+	if (iBuf->mdpImg.mdpOp & MDPOP_DITHER)
+		ppp_operation_reg |= PPP_OP_DITHER_EN;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ROTATION) {
+		ppp_operation_reg |= PPP_OP_ROT_ON;
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			ppp_operation_reg |= PPP_OP_ROT_90;
+		}
+		if (iBuf->mdpImg.mdpOp & MDPOP_LR) {
+			ppp_operation_reg |= PPP_OP_FLIP_LR;
+		}
+		if (iBuf->mdpImg.mdpOp & MDPOP_UD) {
+			ppp_operation_reg |= PPP_OP_FLIP_UD;
+		}
+	}
+
+	src0_ystride = src_width * inpBpp;
+	dest0_ystride = iBuf->ibuf_width * iBuf->bpp;
+
+	/* no need to care about rotation since it's the real-XY. */
+	dst_roi_width = iBuf->roi.dst_width;
+	dst_roi_height = iBuf->roi.dst_height;
+
+	src0 = (uint8 *) iBuf->mdpImg.bmy_addr;
+	dest0 = (uint8 *) iBuf->buf;
+
+	/* Jumping from Y-Plane to Chroma Plane */
+	dest1 = mdp_get_chroma_addr(iBuf);
+
+	/* first pixel addr calculation */
+	mdp_adjust_start_addr(&src0, &src1, sv_slice, sh_slice, iBuf->roi.x,
+			      iBuf->roi.y, src_width, src_height, inpBpp, iBuf,
+			      0);
+	mdp_adjust_start_addr(&dest0, &dest1, dv_slice, dh_slice,
+			      iBuf->roi.lcd_x, iBuf->roi.lcd_y,
+			      iBuf->ibuf_width, iBuf->ibuf_height, iBuf->bpp,
+			      iBuf, 2);
+
+	/* set scale operation */
+	mdp_set_scale(iBuf, dst_roi_width, dst_roi_height,
+		      inputRGB, outputRGB, &ppp_operation_reg);
+
+	/*
+	 * setting background source for blending
+	 */
+	mdp_set_blend_attr(iBuf, &alpha, &tpVal, perPixelAlpha,
+			   &ppp_operation_reg);
+
+	if (ppp_operation_reg & PPP_OP_BLEND_ON) {
+		mdp_ppp_setbg(iBuf);
+
+		if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+			ppp_operation_reg |= PPP_OP_BG_CHROMA_H2V1;
+
+			if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+				tpVal = mdp_conv_matx_rgb2yuv(tpVal,
+						      (uint16 *) &
+						      mdp_ccs_rgb2yuv,
+						      &mdp_plv[0], NULL);
+			}
+		}
+	}
+
+	/*
+	 * 0x0004: enable dbg bus
+	 * 0x0100: "don't care" Edge Condit until scaling is on
+	 * 0x0104: xrc tile x&y size u7.6 format = 7bit.6bit
+	 * 0x0108: src pixel size
+	 * 0x010c: component plane 0 starting address
+	 * 0x011c: component plane 0 ystride
+	 * 0x0124: PPP source config register
+	 * 0x0128: unpacked pattern from lsb to msb (eg. RGB->BGR)
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0108, (iBuf->roi.height << 16 |
+						      iBuf->roi.width));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x010c, src0); /* comp.plane 0 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0110, src1); /* comp.plane 1 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x011c,
+		 (src0_ystride << 16 | src0_ystride));
+
+	/* setup for rgb 565 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0124, ppp_src_cfg_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0128, packPattern);
+	/*
+	 * 0x0138: PPP destination operation register
+	 * 0x014c: constant_alpha|transparent_color
+	 * 0x0150: PPP destination config register
+	 * 0x0154: PPP packing pattern
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0138, ppp_operation_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x014c, alpha << 24 | tpVal);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0150, ppp_dst_cfg_reg);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0154, dst_packPattern);
+
+	/*
+	 * 0x0164: ROI height and width
+	 * 0x0168: Component Plane 0 starting addr
+	 * 0x016c: Component Plane 1 starting addr
+	 * 0x0178: Component Plane 1/0 y stride
+	 */
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0164,
+		 (dst_roi_height << 16 | dst_roi_width));
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0168, dest0);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x016c, dest1);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0178,
+		 (dest0_ystride << 16 | dest0_ystride));
+
+	flush_imgs(req, inpBpp, iBuf->bpp, p_src_file, p_dst_file);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	mdp_ppp_process_curr_djob();
+#else
+	mdp_pipe_kickoff(MDP_PPP_TERM, mfd);
+#endif
+}
+
+static int mdp_ppp_verify_req(struct mdp_blit_req *req)
+{
+	u32 src_width, src_height, dst_width, dst_height;
+
+	if (req == NULL)
+		return -1;
+
+	if (MDP_IS_IMGTYPE_BAD(req->src.format) ||
+	    MDP_IS_IMGTYPE_BAD(req->dst.format))
+		return -1;
+
+	if ((req->src.width == 0) || (req->src.height == 0) ||
+	    (req->src_rect.w == 0) || (req->src_rect.h == 0) ||
+	    (req->dst.width == 0) || (req->dst.height == 0) ||
+	    (req->dst_rect.w == 0) || (req->dst_rect.h == 0))
+
+		return -1;
+
+	if (((req->src_rect.x + req->src_rect.w) > req->src.width) ||
+	    ((req->src_rect.y + req->src_rect.h) > req->src.height))
+		return -1;
+
+	if (((req->dst_rect.x + req->dst_rect.w) > req->dst.width) ||
+	    ((req->dst_rect.y + req->dst_rect.h) > req->dst.height))
+		return -1;
+
+	/*
+	 * scaling range check
+	 */
+	src_width = req->src_rect.w;
+	src_height = req->src_rect.h;
+
+	if (req->flags & MDP_ROT_90) {
+		dst_width = req->dst_rect.h;
+		dst_height = req->dst_rect.w;
+	} else {
+		dst_width = req->dst_rect.w;
+		dst_height = req->dst_rect.h;
+	}
+
+	switch (req->dst.format) {
+	case MDP_Y_CRCB_H2V2:
+	case MDP_Y_CBCR_H2V2:
+		src_width = (src_width / 2) * 2;
+		src_height = (src_height / 2) * 2;
+		dst_width = (src_width / 2) * 2;
+		dst_height = (src_height / 2) * 2;
+		break;
+
+	case MDP_Y_CRCB_H2V1:
+	case MDP_Y_CBCR_H2V1:
+	case MDP_YCRYCB_H2V1:
+		src_width = (src_width / 2) * 2;
+		dst_width = (src_width / 2) * 2;
+		break;
+
+	default:
+		break;
+	}
+
+	if (((MDP_SCALE_Q_FACTOR * dst_width) / src_width >
+	     MDP_MAX_X_SCALE_FACTOR)
+	    || ((MDP_SCALE_Q_FACTOR * dst_width) / src_width <
+		MDP_MIN_X_SCALE_FACTOR))
+		return -1;
+
+	if (((MDP_SCALE_Q_FACTOR * dst_height) / src_height >
+	     MDP_MAX_Y_SCALE_FACTOR)
+	    || ((MDP_SCALE_Q_FACTOR * dst_height) / src_height <
+		MDP_MIN_Y_SCALE_FACTOR))
+		return -1;
+
+	return 0;
+}
+
+/**
+ * get_gem_img() - retrieve drm obj's start address and size
+ * @img:	contains drm file descriptor and gem handle
+ * @start:	repository of starting address of drm obj allocated memory
+ * @len:	repository of size of drm obj alloacted memory
+ *
+ **/
+int get_gem_img(struct mdp_img *img, unsigned long *start, unsigned long *len)
+{
+	panic("waaaaaaaah");
+	//return kgsl_gem_obj_addr(img->memory_id, (int)img->priv, start, len);
+}
+
+int get_img(struct mdp_img *img, struct fb_info *info, unsigned long *start,
+	    unsigned long *len, struct file **pp_file)
+{
+	int put_needed, ret = 0;
+	struct file *file;
+	unsigned long vstart;
+#ifdef CONFIG_ANDROID_PMEM
+	if (!get_pmem_file(img->memory_id, start, &vstart, len, pp_file))
+		return 0;
+#endif
+	file = fget_light(img->memory_id, &put_needed);
+	if (file == NULL)
+		return -1;
+
+	if (MAJOR(file->f_dentry->d_inode->i_rdev) == FB_MAJOR) {
+		*start = info->fix.smem_start;
+		*len = info->fix.smem_len;
+		*pp_file = file;
+	} else {
+		ret = -1;
+		fput_light(file, put_needed);
+	}
+	return ret;
+}
+
+int mdp_ppp_blit(struct fb_info *info, struct mdp_blit_req *req,
+	struct file **pp_src_file, struct file **pp_dst_file)
+{
+	unsigned long src_start, dst_start;
+	unsigned long src_len = 0;
+	unsigned long dst_len = 0;
+	MDPIBUF iBuf;
+	u32 dst_width, dst_height;
+	struct file *p_src_file = 0 , *p_dst_file = 0;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (req->dst.format == MDP_FB_FORMAT)
+		req->dst.format =  mfd->fb_imgType;
+	if (req->src.format == MDP_FB_FORMAT)
+		req->src.format = mfd->fb_imgType;
+
+	if (req->flags & MDP_BLIT_SRC_GEM) {
+		if (get_gem_img(&req->src, &src_start, &src_len) < 0)
+			return -1;
+	} else {
+		get_img(&req->src, info, &src_start, &src_len, &p_src_file);
+	}
+	if (src_len == 0) {
+		printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+		       "memory\n");
+		return -1;
+	}
+
+	if (req->flags & MDP_BLIT_DST_GEM) {
+		if (get_gem_img(&req->dst, &dst_start, &dst_len) < 0)
+			return -1;
+	} else {
+		get_img(&req->dst, info, &dst_start, &dst_len, &p_dst_file);
+	}
+	if (dst_len == 0) {
+		printk(KERN_ERR "mdp_ppp: could not retrieve image from "
+		       "memory\n");
+		return -1;
+	}
+	*pp_src_file = p_src_file;
+	*pp_dst_file = p_dst_file;
+	if (mdp_ppp_verify_req(req)) {
+		printk(KERN_ERR "mdp_ppp: invalid image!\n");
+		return -1;
+	}
+
+	iBuf.ibuf_width = req->dst.width;
+	iBuf.ibuf_height = req->dst.height;
+	iBuf.bpp = bytes_per_pixel[req->dst.format];
+
+	iBuf.ibuf_type = req->dst.format;
+	iBuf.buf = (uint8 *) dst_start;
+	iBuf.buf += req->dst.offset;
+
+	iBuf.roi.lcd_x = req->dst_rect.x;
+	iBuf.roi.lcd_y = req->dst_rect.y;
+	iBuf.roi.dst_width = req->dst_rect.w;
+	iBuf.roi.dst_height = req->dst_rect.h;
+
+	iBuf.roi.x = req->src_rect.x;
+	iBuf.roi.width = req->src_rect.w;
+	iBuf.roi.y = req->src_rect.y;
+	iBuf.roi.height = req->src_rect.h;
+
+	iBuf.mdpImg.width = req->src.width;
+	iBuf.mdpImg.imgType = req->src.format;
+
+	iBuf.mdpImg.bmy_addr = (uint32 *) (src_start + req->src.offset);
+	iBuf.mdpImg.cbcr_addr =
+	    (uint32 *) ((uint32) iBuf.mdpImg.bmy_addr +
+			req->src.width * req->src.height);
+
+	iBuf.mdpImg.mdpOp = MDPOP_NOP;
+
+	/* blending check */
+	if (req->transp_mask != MDP_TRANSP_NOP) {
+		iBuf.mdpImg.mdpOp |= MDPOP_TRANSP;
+		iBuf.mdpImg.tpVal = req->transp_mask;
+		iBuf.mdpImg.tpVal = mdp_calc_tpval(&iBuf.mdpImg);
+	}
+
+	req->alpha &= 0xff;
+	if (req->alpha < MDP_ALPHA_NOP) {
+		iBuf.mdpImg.mdpOp |= MDPOP_ALPHAB;
+		iBuf.mdpImg.alpha = req->alpha;
+	}
+
+	/* rotation check */
+	if (req->flags & MDP_FLIP_LR)
+		iBuf.mdpImg.mdpOp |= MDPOP_LR;
+	if (req->flags & MDP_FLIP_UD)
+		iBuf.mdpImg.mdpOp |= MDPOP_UD;
+	if (req->flags & MDP_ROT_90)
+		iBuf.mdpImg.mdpOp |= MDPOP_ROT90;
+	if (req->flags & MDP_DITHER)
+		iBuf.mdpImg.mdpOp |= MDPOP_DITHER;
+
+	if (req->flags & MDP_BLEND_FG_PREMULT) {
+#ifdef CONFIG_FB_MSM_MDP31
+		iBuf.mdpImg.mdpOp |= MDPOP_FG_PM_ALPHA;
+#else
+		return -EINVAL;
+#endif
+	}
+
+	if (req->flags & MDP_DEINTERLACE) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if ((req->src.format != MDP_Y_CBCR_H2V2) &&
+			(req->src.format != MDP_Y_CRCB_H2V2))
+#endif
+		return -EINVAL;
+	}
+
+	/* scale check */
+	if (req->flags & MDP_ROT_90) {
+		dst_width = req->dst_rect.h;
+		dst_height = req->dst_rect.w;
+	} else {
+		dst_width = req->dst_rect.w;
+		dst_height = req->dst_rect.h;
+	}
+
+	if ((iBuf.roi.width != dst_width) || (iBuf.roi.height != dst_height))
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE;
+
+	if (req->flags & MDP_BLUR) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if (req->flags & MDP_SHARPENING)
+			printk(KERN_WARNING
+				"mdp: MDP_SHARPENING is set with MDP_BLUR!\n");
+		req->flags |= MDP_SHARPENING;
+		req->sharpening_strength = -127;
+#else
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_BLUR;
+
+#endif
+	}
+
+	if (req->flags & MDP_SHARPENING) {
+#ifdef CONFIG_FB_MSM_MDP31
+		if ((req->sharpening_strength > 127) ||
+			(req->sharpening_strength < -127)) {
+			printk(KERN_ERR
+				"%s: sharpening strength out of range\n",
+				__func__);
+			return -EINVAL;
+		}
+
+		iBuf.mdpImg.mdpOp |= MDPOP_ASCALE | MDPOP_SHARPENING;
+		iBuf.mdpImg.sp_value = req->sharpening_strength & 0xff;
+#else
+		return -EINVAL;
+#endif
+	}
+
+	down(&mdp_ppp_mutex);
+	/* MDP cmd block enable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+#else
+	/* bg tile fetching HW workaround */
+	if (((iBuf.mdpImg.mdpOp & (MDPOP_TRANSP | MDPOP_ALPHAB)) ||
+	     (req->src.format == MDP_ARGB_8888) ||
+	     (req->src.format == MDP_BGRA_8888) ||
+	     (req->src.format == MDP_RGBA_8888)) &&
+	    (iBuf.mdpImg.mdpOp & MDPOP_ROT90) && (req->dst_rect.w <= 16)) {
+		int dst_h, src_w, i;
+
+		src_w = req->src_rect.w;
+		dst_h = iBuf.roi.dst_height;
+
+		for (i = 0; i < (req->dst_rect.h / 16); i++) {
+			/* this tile size */
+			iBuf.roi.dst_height = 16;
+			iBuf.roi.width =
+			    (16 * req->src_rect.w) / req->dst_rect.h;
+
+			/* if it's out of scale range... */
+			if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+			     iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR)
+				iBuf.roi.width =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MAX_X_SCALE_FACTOR;
+			else if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				  iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR)
+				iBuf.roi.width =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MIN_X_SCALE_FACTOR;
+
+			mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+
+			/* next tile location */
+			iBuf.roi.lcd_y += 16;
+			iBuf.roi.x += iBuf.roi.width;
+
+			/* this is for a remainder update */
+			dst_h -= 16;
+			src_w -= iBuf.roi.width;
+		}
+
+		if ((dst_h < 0) || (src_w < 0))
+			printk
+			    ("msm_fb: mdp_blt_ex() unexpected result! line:%d\n",
+			     __LINE__);
+
+		/* remainder update */
+		if ((dst_h > 0) && (src_w > 0)) {
+			u32 tmp_v;
+
+			iBuf.roi.dst_height = dst_h;
+			iBuf.roi.width = src_w;
+
+			if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+			     iBuf.roi.width) > MDP_MAX_X_SCALE_FACTOR) {
+				tmp_v =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MAX_X_SCALE_FACTOR +
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+				    MDP_MAX_X_SCALE_FACTOR ? 1 : 0;
+
+				/* move x location as roi width gets bigger */
+				iBuf.roi.x -= tmp_v - iBuf.roi.width;
+				iBuf.roi.width = tmp_v;
+			} else
+			    if (((MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				 iBuf.roi.width) < MDP_MIN_X_SCALE_FACTOR) {
+				tmp_v =
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) /
+				    MDP_MIN_X_SCALE_FACTOR +
+				    (MDP_SCALE_Q_FACTOR * iBuf.roi.dst_height) %
+				    MDP_MIN_X_SCALE_FACTOR ? 1 : 0;
+
+				/*
+				 * we don't move x location for continuity of
+				 * source image
+				 */
+				iBuf.roi.width = tmp_v;
+			}
+
+			mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+		}
+	} else {
+		mdp_start_ppp(mfd, &iBuf, req, p_src_file, p_dst_file);
+	}
+#endif
+
+	/* MDP cmd block disable */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	up(&mdp_ppp_mutex);
+
+	return 0;
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.c b/drivers/staging/msm/mdp_ppp_dq.c
new file mode 100644
index 0000000..3dc1c0c
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.c
@@ -0,0 +1,347 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include "mdp.h"
+
+static boolean mdp_ppp_intr_flag = FALSE;
+static boolean mdp_ppp_busy_flag = FALSE;
+
+/* Queue to keep track of the completed jobs for cleaning */
+static LIST_HEAD(mdp_ppp_djob_clnrq);
+static DEFINE_SPINLOCK(mdp_ppp_djob_clnrq_lock);
+
+/* Worker to cleanup Display Jobs */
+static struct workqueue_struct *mdp_ppp_djob_clnr;
+
+/* Display Queue (DQ) for MDP PPP Block */
+static LIST_HEAD(mdp_ppp_dq);
+static DEFINE_SPINLOCK(mdp_ppp_dq_lock);
+
+/* Current Display Job for MDP PPP */
+static struct mdp_ppp_djob *curr_djob;
+
+/* Track ret code for the last opeartion */
+static int mdp_ppp_ret_code;
+
+inline int mdp_ppp_get_ret_code(void)
+{
+	return mdp_ppp_ret_code;
+}
+
+/* Push <Reg, Val> pair into DQ (if available) to later
+ * program the MDP PPP Block */
+inline void mdp_ppp_outdw(uint32_t addr, uint32_t data)
+{
+	if (curr_djob) {
+
+		/* get the last node of the list. */
+		struct mdp_ppp_roi_cmd_set *node =
+			list_entry(curr_djob->roi_cmd_list.prev,
+				struct mdp_ppp_roi_cmd_set, node);
+
+		/* If a node is already full, create a new one and add it to
+		 * the list (roi_cmd_list).
+		 */
+		if (node->ncmds == MDP_PPP_ROI_NODE_SIZE) {
+			node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set),
+				GFP_KERNEL);
+			if (!node) {
+				printk(KERN_ERR
+					"MDP_PPP: not enough memory.\n");
+				mdp_ppp_ret_code = -EINVAL;
+				return;
+			}
+
+			/* no ROI commands initially */
+			node->ncmds = 0;
+
+			/* add one node to roi_cmd_list. */
+			list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+		}
+
+		/* register ROI commands */
+		node->cmd[node->ncmds].reg = addr;
+		node->cmd[node->ncmds].val = data;
+		node->ncmds++;
+	} else
+		/* program MDP PPP block now */
+		outpdw((addr), (data));
+}
+
+/* Initialize DQ */
+inline void mdp_ppp_dq_init(void)
+{
+	mdp_ppp_djob_clnr = create_singlethread_workqueue("MDPDJobClnrThrd");
+}
+
+/* Release resources of a job (DJob). */
+static void mdp_ppp_del_djob(struct mdp_ppp_djob *job)
+{
+	struct mdp_ppp_roi_cmd_set *node, *tmp;
+
+	/* release mem */
+	mdp_ppp_put_img(job->p_src_file, job->p_dst_file);
+
+	/* release roi_cmd_list */
+	list_for_each_entry_safe(node, tmp, &job->roi_cmd_list, node) {
+		list_del(&node->node);
+		kfree(node);
+	}
+
+	/* release job struct */
+	kfree(job);
+}
+
+/* Worker thread to reclaim resources once a display job is done */
+static void mdp_ppp_djob_cleaner(struct work_struct *work)
+{
+	struct mdp_ppp_djob *job;
+
+	MDP_PPP_DEBUG_MSG("mdp ppp display job cleaner started \n");
+
+	/* cleanup display job */
+	job = container_of(work, struct mdp_ppp_djob, cleaner.work);
+	if (likely(work && job))
+		mdp_ppp_del_djob(job);
+}
+
+/* Create a new Display Job (DJob) */
+inline struct mdp_ppp_djob *mdp_ppp_new_djob(void)
+{
+	struct mdp_ppp_djob *job;
+	struct mdp_ppp_roi_cmd_set *node;
+
+	/* create a new djob */
+	job = kmalloc(sizeof(struct mdp_ppp_djob), GFP_KERNEL);
+	if (!job)
+		return NULL;
+
+	/* add the first node to curr_djob->roi_cmd_list */
+	node = kmalloc(sizeof(struct mdp_ppp_roi_cmd_set), GFP_KERNEL);
+	if (!node) {
+		kfree(job);
+		return NULL;
+	}
+
+	/* make this current djob container to keep track of the curr djob not
+	 * used in the async path i.e. no sync needed
+	 *
+	 * Should not contain any references from the past djob
+	 */
+	BUG_ON(curr_djob);
+	curr_djob = job;
+	INIT_LIST_HEAD(&curr_djob->roi_cmd_list);
+
+	/* no ROI commands initially */
+	node->ncmds = 0;
+	INIT_LIST_HEAD(&node->node);
+	list_add_tail(&node->node, &curr_djob->roi_cmd_list);
+
+	/* register this djob with the djob cleaner
+	 * initializes 'work' data struct
+	 */
+	INIT_DELAYED_WORK(&curr_djob->cleaner, mdp_ppp_djob_cleaner);
+	INIT_LIST_HEAD(&curr_djob->entry);
+
+	curr_djob->p_src_file = 0;
+	curr_djob->p_dst_file = 0;
+
+	return job;
+}
+
+/* Undo the effect of mdp_ppp_new_djob() */
+inline void mdp_ppp_clear_curr_djob(void)
+{
+	if (likely(curr_djob)) {
+		mdp_ppp_del_djob(curr_djob);
+		curr_djob = NULL;
+	}
+}
+
+/* Cleanup dirty djobs */
+static void mdp_ppp_flush_dirty_djobs(void *cond)
+{
+	unsigned long flags;
+	struct mdp_ppp_djob *job;
+
+	/* Flush the jobs from the djob clnr queue */
+	while (cond && test_bit(0, (unsigned long *)cond)) {
+
+		/* Until we are done with the cleanup queue */
+		spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+		if (list_empty(&mdp_ppp_djob_clnrq)) {
+			spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+			break;
+		}
+
+		MDP_PPP_DEBUG_MSG("flushing djobs ... loop \n");
+
+		/* Retrieve the job that needs to be cleaned */
+		job = list_entry(mdp_ppp_djob_clnrq.next,
+				struct mdp_ppp_djob, entry);
+		list_del_init(&job->entry);
+		spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+		/* Keep mem state coherent */
+		msm_fb_ensure_mem_coherency_after_dma(job->info, &job->req, 1);
+
+		/* Schedule jobs for cleanup
+		 * A seperate worker thread does this */
+		queue_delayed_work(mdp_ppp_djob_clnr, &job->cleaner,
+			mdp_timer_duration);
+	}
+}
+
+/* If MDP PPP engine is busy, wait until it is available again */
+void mdp_ppp_wait(void)
+{
+	unsigned long flags;
+	int cond = 1;
+
+	/* keep flushing dirty djobs as long as MDP PPP engine is busy */
+	mdp_ppp_flush_dirty_djobs(&mdp_ppp_busy_flag);
+
+	/* block if MDP PPP engine is still busy */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	if (test_bit(0, (unsigned long *)&mdp_ppp_busy_flag)) {
+
+		/* prepare for the wakeup event */
+		test_and_set_bit(0, (unsigned long *)&mdp_ppp_waiting);
+		INIT_COMPLETION(mdp_ppp_comp);
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* block uninterruptibly until available */
+		MDP_PPP_DEBUG_MSG("waiting for mdp... \n");
+		wait_for_completion_killable(&mdp_ppp_comp);
+
+		/* if MDP PPP engine is still free,
+		 * disable INT_MDP if enabled
+		 */
+		spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+		if (!test_bit(0, (unsigned long *)&mdp_ppp_busy_flag) &&
+		test_and_clear_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+			mdp_disable_irq(MDP_PPP_TERM);
+	}
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+	/* flush remaining dirty djobs, if any */
+	mdp_ppp_flush_dirty_djobs(&cond);
+}
+
+/* Program MDP PPP block to process this ROI */
+static void mdp_ppp_process_roi(struct list_head *roi_cmd_list)
+{
+
+	/* program PPP engine with registered ROI commands */
+	struct mdp_ppp_roi_cmd_set *node;
+	list_for_each_entry(node, roi_cmd_list, node) {
+		int i = 0;
+		for (; i < node->ncmds; i++) {
+			MDP_PPP_DEBUG_MSG("%d: reg: 0x%x val: 0x%x \n",
+					i, node->cmd[i].reg, node->cmd[i].val);
+			outpdw(node->cmd[i].reg, node->cmd[i].val);
+		}
+	}
+
+	/* kickoff MDP PPP engine */
+	MDP_PPP_DEBUG_MSG("kicking off mdp \n");
+	outpdw(MDP_BASE + 0x30, 0x1000);
+}
+
+/* Submit this display job to MDP PPP engine */
+static void mdp_ppp_dispatch_djob(struct mdp_ppp_djob *job)
+{
+	/* enable INT_MDP if disabled */
+	if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_intr_flag))
+		mdp_enable_irq(MDP_PPP_TERM);
+
+	/* turn on PPP and CMD blocks */
+	mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+	mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+	/* process this ROI */
+	mdp_ppp_process_roi(&job->roi_cmd_list);
+}
+
+/* Enqueue this display job to be cleaned up later in "mdp_ppp_djob_done" */
+static inline void mdp_ppp_enqueue_djob(struct mdp_ppp_djob *job)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	list_add_tail(&job->entry, &mdp_ppp_dq);
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+}
+
+/* First enqueue display job for cleanup and dispatch immediately
+ * if MDP PPP engine is free */
+void mdp_ppp_process_curr_djob(void)
+{
+	/* enqueue djob */
+	mdp_ppp_enqueue_djob(curr_djob);
+
+	/* dispatch now if MDP PPP engine is free */
+	if (!test_and_set_bit(0, (unsigned long *)&mdp_ppp_busy_flag))
+		mdp_ppp_dispatch_djob(curr_djob);
+
+	/* done with the current djob */
+	curr_djob = NULL;
+}
+
+/* Called from mdp_isr - cleanup finished job and start with next
+ * if available else set MDP PPP engine free */
+void mdp_ppp_djob_done(void)
+{
+	struct mdp_ppp_djob *curr, *next;
+	unsigned long flags;
+
+	/* dequeue current */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	curr = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob, entry);
+	list_del_init(&curr->entry);
+	spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+	/* cleanup current - enqueue in the djob clnr queue */
+	spin_lock_irqsave(&mdp_ppp_djob_clnrq_lock, flags);
+	list_add_tail(&curr->entry, &mdp_ppp_djob_clnrq);
+	spin_unlock_irqrestore(&mdp_ppp_djob_clnrq_lock, flags);
+
+	/* grab next pending */
+	spin_lock_irqsave(&mdp_ppp_dq_lock, flags);
+	if (!list_empty(&mdp_ppp_dq)) {
+		next = list_entry(mdp_ppp_dq.next, struct mdp_ppp_djob,
+			entry);
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* process next in the queue */
+		mdp_ppp_process_roi(&next->roi_cmd_list);
+	} else {
+		/* no pending display job */
+		spin_unlock_irqrestore(&mdp_ppp_dq_lock, flags);
+
+		/* turn off PPP and CMD blocks - "in_isr" is TRUE */
+		mdp_pipe_ctrl(MDP_PPP_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+
+		/* notify if waiting */
+		if (test_and_clear_bit(0, (unsigned long *)&mdp_ppp_waiting))
+			complete(&mdp_ppp_comp);
+
+		/* set free */
+		test_and_clear_bit(0, (unsigned long *)&mdp_ppp_busy_flag);
+	}
+}
diff --git a/drivers/staging/msm/mdp_ppp_dq.h b/drivers/staging/msm/mdp_ppp_dq.h
new file mode 100644
index 0000000..03e4e9a
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_dq.h
@@ -0,0 +1,86 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MDP_PPP_DQ_H
+#define MDP_PPP_DQ_H
+
+#include "msm_fb_def.h"
+
+#define MDP_PPP_DEBUG_MSG MSM_FB_DEBUG
+
+/* The maximum number of <Reg,Val> pairs in an mdp_ppp_roi_cmd_set structure (a
+ * node)
+ */
+#define MDP_PPP_ROI_NODE_SIZE 32
+
+/* ROI config command (<Reg,Val> pair) for MDP PPP block */
+struct mdp_ppp_roi_cmd {
+	uint32_t reg;
+	uint32_t val;
+};
+
+/* ROI config commands for MDP PPP block are stored in a list of
+ * mdp_ppp_roi_cmd_set structures (nodes).
+ */
+struct mdp_ppp_roi_cmd_set {
+	struct list_head node;
+	uint32_t ncmds; /* number of commands in this set (node). */
+	struct mdp_ppp_roi_cmd cmd[MDP_PPP_ROI_NODE_SIZE];
+};
+
+/* MDP PPP Display Job (DJob) */
+struct mdp_ppp_djob {
+	struct list_head entry;
+	/* One ROI per MDP PPP DJob */
+	struct list_head roi_cmd_list;
+	struct mdp_blit_req req;
+	struct fb_info *info;
+	struct delayed_work cleaner;
+	struct file *p_src_file, *p_dst_file;
+};
+
+extern struct completion mdp_ppp_comp;
+extern boolean mdp_ppp_waiting;
+extern unsigned long mdp_timer_duration;
+
+unsigned int mdp_ppp_async_op_get(void);
+void mdp_ppp_async_op_set(unsigned int flag);
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+	struct mdp_blit_req *req_list, int req_list_count);
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file);
+void mdp_ppp_dq_init(void);
+void mdp_ppp_outdw(uint32_t addr, uint32_t data);
+struct mdp_ppp_djob *mdp_ppp_new_djob(void);
+void mdp_ppp_clear_curr_djob(void);
+void mdp_ppp_process_curr_djob(void);
+int mdp_ppp_get_ret_code(void);
+void mdp_ppp_djob_done(void);
+void mdp_ppp_wait(void);
+
+#endif /* MDP_PPP_DQ_H */
diff --git a/drivers/staging/msm/mdp_ppp_v20.c b/drivers/staging/msm/mdp_ppp_v20.c
new file mode 100644
index 0000000..b5b7271
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v20.c
@@ -0,0 +1,2486 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+static MDP_SCALE_MODE mdp_curr_up_scale_xy;
+static MDP_SCALE_MODE mdp_curr_down_scale_x;
+static MDP_SCALE_MODE mdp_curr_down_scale_y;
+
+static long long mdp_do_div(long long num, long long den)
+{
+	do_div(num, den);
+	return num;
+}
+
+struct mdp_table_entry mdp_gaussian_blur_table[] = {
+	/* max variance */
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50280, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50284, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50288, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5028c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50290, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50294, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50298, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5029c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502a8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502ac, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502b8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502bc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502c8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502cc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502d8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502dc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502e8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502ec, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f0, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f4, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502f8, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x502fc, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50300, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50304, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50308, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5030c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50310, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50314, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50318, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5031c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50320, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50324, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50328, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5032c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50330, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50334, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50338, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5033c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50340, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50344, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50348, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5034c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50350, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50354, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50358, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5035c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50360, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50364, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50368, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5036c, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50370, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50374, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x50378, 0x20000080 },
+	{ 0x5fffc, 0x20000080 },
+	{ 0x5037c, 0x20000080 },
+};
+
+static void load_scale_table(
+	struct mdp_table_entry *table, int len)
+{
+	int i;
+	for (i = 0; i < len; i++)
+		MDP_OUTP(MDP_BASE + table[i].reg, table[i].val);
+}
+
+static void mdp_load_pr_upscale_table(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50204, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50208, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5020c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50210, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50214, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50218, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5021c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50220, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50224, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50228, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5022c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50230, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50234, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50238, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5023c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50240, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50244, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50248, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5024c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50250, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50254, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50258, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5025c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50260, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50264, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50268, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5026c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50270, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50274, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50278, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5027c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_x_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x0);
+}
+
+static void mdp_load_pr_downscale_table_y_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ff);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x0);
+}
+
+static void mdp_load_bc_upscale_table(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50200, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50204, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50208, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5020c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50210, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50214, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50218, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5021c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x50220, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x50224, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x50228, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x5022c, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x50230, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x50234, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x50238, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x5023c, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x50240, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x50244, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x50248, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x5024c, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x50250, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x50254, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x50258, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x5025c, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x50260, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x50264, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x50268, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x5026c, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x50270, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x50274, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x50278, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x5027c, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_x_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x23400083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x23000083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x23000082);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x23000081);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x23000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x22c0007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x2280007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x2280007e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x2280007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x2240007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x2240007c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x2240007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x2200007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x22400079);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x22400078);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x22400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x22000077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x22000076);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x22000075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x21c00075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x21c00074);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x21c00073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x21800073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x21800072);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x21800071);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x21800070);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x2180006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x2140006e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x2140006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x2100006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x2100006c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_y_point2TOpoint4(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac00084);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x23400083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b000084);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x23000083);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400084);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x23000082);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b400085);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x23000081);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1b800085);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x23000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc00086);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x22c0007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c000086);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x2280007f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c400086);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x2280007e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1c800086);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x2280007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00086);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x2240007d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc00087);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x2240007c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d000087);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x2240007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400087);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x2200007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d400088);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x22400079);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1d800088);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x22400078);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00088);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x22400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc00089);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x22000077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e000089);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x22000076);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1e400089);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x22000075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00088);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x21c00075);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec00089);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x21c00074);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f000089);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x21c00073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f400089);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x21800073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f40008a);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x21800072);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1f80008a);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x21800071);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008a);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x21800070);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1fc0008b);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x2180006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2000008c);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x2140006e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2040008c);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x2140006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x2080008c);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x2100006d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008c);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x2100006c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x20c0008d);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x2100006b);
+}
+
+static void mdp_load_bc_downscale_table_x_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x33800088);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x33400084);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x33000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x3300007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x32400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x32000073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x31c0006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x3140006b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x31000067);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x30800062);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x2fc0005f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x2fc0005b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x2f400057);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x2e400054);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x2e000050);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x2d80004c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x2d000049);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x2c800045);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x2c000042);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x2b40003e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x2a80003b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x2a000039);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x29400036);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x28800032);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x2800002f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x2740002c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x26c00029);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x26000027);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x25000024);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x24800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x23800020);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_y_point4TOpoint6(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x740008c);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x33800088);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x800008e);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x33400084);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8400092);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x33000080);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9000094);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x3300007b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9c00098);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x32400077);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xa40009b);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x32000073);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xb00009d);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x31c0006f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xbc000a0);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x3140006b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc8000a2);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x31000067);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xd8000a5);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x30800062);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xe4000a8);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x2fc0005f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xec000aa);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x2fc0005b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8000ad);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x2f400057);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x108000b0);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x2e400054);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x114000b2);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x2e000050);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x124000b4);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x2d80004c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x130000b6);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x2d000049);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x140000b8);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x2c800045);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x150000b9);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x2c000042);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x15c000bd);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x2b40003e);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x16c000bf);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x2a80003b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x17c000bf);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x2a000039);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x188000c2);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x29400036);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x19c000c4);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x28800032);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ac000c5);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x2800002f);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1bc000c7);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x2740002c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1cc000c8);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x26c00029);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1dc000c9);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x26000027);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1ec000cc);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x25000024);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x200000cc);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x24800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x210000cd);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x23800020);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x220000ce);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x2300001d);
+}
+
+static void mdp_load_bc_downscale_table_x_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x4bc00068);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x4bc00060);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x4b800059);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x4b000052);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x4a80004b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x4a000044);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x4940003d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x48400037);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x47800031);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x4640002b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x45000026);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x43800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x4240001c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x40800018);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x3f000014);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x3d400010);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x3b80000c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x39800009);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x37c00006);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x35800004);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x33800002);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x31400000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x2f4003fe);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x2d0003fc);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x2b0003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x28c003fa);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x268003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x244003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0x224003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0x200003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x1e0003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_y_point6TOpoint8(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000070);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x4bc00068);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000078);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x4bc00060);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000080);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x4b800059);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe000089);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x4b000052);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe400091);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x4a80004b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40009a);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x4a000044);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe8000a3);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x4940003d);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec000ac);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x48400037);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff0000b4);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x47800031);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff8000bd);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x4640002b);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc5);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x45000026);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x8000ce);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x43800021);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x10000d6);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x4240001c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x18000df);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x40800018);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x24000e6);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x3f000014);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x30000ee);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x3d400010);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x40000f5);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x3b80000c);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x50000fc);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x39800009);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x6000102);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x37c00006);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x7000109);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x35800004);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x840010e);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x33800002);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x9800114);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x31400000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xac00119);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x2f4003fe);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xc40011e);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x2d0003fc);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xdc00121);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x2b0003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf400125);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x28c003fa);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x11000128);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x268003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x12c0012a);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x244003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1480012c);
+	MDP_OUTP(MDP_BASE + 0x50370, 0x224003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1640012e);
+	MDP_OUTP(MDP_BASE + 0x50374, 0x200003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1800012f);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x1e0003f8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x1a00012f);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x1c0003f8);
+}
+
+static void mdp_load_bc_downscale_table_x_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50280, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50284, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50288, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5028c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50290, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50294, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50298, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5029c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x502a0, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x502a4, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x502a8, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x502ac, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x502b0, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x502b4, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x502b8, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x502bc, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x502c0, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x502c4, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x502c8, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x502cc, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x502d0, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x502d4, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x502d8, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x502dc, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x502e0, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x502e4, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x502e8, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x502ec, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x502f0, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x502f4, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x502f8, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x502fc, 0x34003fe);
+}
+
+static void mdp_load_bc_downscale_table_y_point8TO1(void)
+{
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0x0);
+	MDP_OUTP(MDP_BASE + 0x50300, 0x7fc00000);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xff80000d);
+	MDP_OUTP(MDP_BASE + 0x50304, 0x7ec003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfec0001c);
+	MDP_OUTP(MDP_BASE + 0x50308, 0x7d4003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe40002b);
+	MDP_OUTP(MDP_BASE + 0x5030c, 0x7b8003ed);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfd80003c);
+	MDP_OUTP(MDP_BASE + 0x50310, 0x794003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc0004d);
+	MDP_OUTP(MDP_BASE + 0x50314, 0x76c003e4);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfc40005f);
+	MDP_OUTP(MDP_BASE + 0x50318, 0x73c003e0);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb800071);
+	MDP_OUTP(MDP_BASE + 0x5031c, 0x708003de);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfac00085);
+	MDP_OUTP(MDP_BASE + 0x50320, 0x6d0003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa000098);
+	MDP_OUTP(MDP_BASE + 0x50324, 0x698003d9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf98000ac);
+	MDP_OUTP(MDP_BASE + 0x50328, 0x654003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf8c000c1);
+	MDP_OUTP(MDP_BASE + 0x5032c, 0x610003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf84000d5);
+	MDP_OUTP(MDP_BASE + 0x50330, 0x5c8003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf7c000e9);
+	MDP_OUTP(MDP_BASE + 0x50334, 0x580003d7);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf74000fd);
+	MDP_OUTP(MDP_BASE + 0x50338, 0x534003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c00112);
+	MDP_OUTP(MDP_BASE + 0x5033c, 0x4e8003d8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6800126);
+	MDP_OUTP(MDP_BASE + 0x50340, 0x494003da);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600013a);
+	MDP_OUTP(MDP_BASE + 0x50344, 0x448003db);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf600014d);
+	MDP_OUTP(MDP_BASE + 0x50348, 0x3f4003dd);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00160);
+	MDP_OUTP(MDP_BASE + 0x5034c, 0x3a4003df);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00172);
+	MDP_OUTP(MDP_BASE + 0x50350, 0x354003e1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf5c00184);
+	MDP_OUTP(MDP_BASE + 0x50354, 0x304003e3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6000195);
+	MDP_OUTP(MDP_BASE + 0x50358, 0x2b0003e6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf64001a6);
+	MDP_OUTP(MDP_BASE + 0x5035c, 0x260003e8);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf6c001b4);
+	MDP_OUTP(MDP_BASE + 0x50360, 0x214003eb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf78001c2);
+	MDP_OUTP(MDP_BASE + 0x50364, 0x1c4003ee);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf80001cf);
+	MDP_OUTP(MDP_BASE + 0x50368, 0x17c003f1);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xf90001db);
+	MDP_OUTP(MDP_BASE + 0x5036c, 0x134003f3);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfa0001e5);
+	MDP_OUTP(MDP_BASE + 0x50370, 0xf0003f6);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfb4001ee);
+	MDP_OUTP(MDP_BASE + 0x50374, 0xac003f9);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfcc001f5);
+	MDP_OUTP(MDP_BASE + 0x50378, 0x70003fb);
+	MDP_OUTP(MDP_BASE + 0x5fffc, 0xfe4001fb);
+	MDP_OUTP(MDP_BASE + 0x5037c, 0x34003fe);
+}
+
+static int mdp_get_edge_cond(MDPIBUF *iBuf, uint32 *dup, uint32 *dup2)
+{
+	uint32 reg;
+	uint32 dst_roi_width;	/* Dimensions of DST ROI. */
+	uint32 dst_roi_height;	/* Used to calculate scaling ratios. */
+
+	/*
+	 * positions of the luma pixel(relative to the image ) required for
+	 * scaling the ROI
+	 */
+	int32 luma_interp_point_left = 0; /* left-most luma pixel needed */
+	int32 luma_interp_point_right = 0; /* right-most luma pixel needed */
+	int32 luma_interp_point_top = 0; /* top-most luma pixel needed */
+	int32 luma_interp_point_bottom = 0; /* bottom-most luma pixel needed */
+
+	/*
+	 * positions of the chroma pixel(relative to the image ) required for
+	 * interpolating a chroma value at all required luma positions
+	 */
+	/* left-most chroma pixel needed */
+	int32 chroma_interp_point_left = 0;
+	/* right-most chroma pixel needed */
+	int32 chroma_interp_point_right = 0;
+	/* top-most chroma pixel needed */
+	int32 chroma_interp_point_top = 0;
+	/* bottom-most chroma pixel needed */
+	int32 chroma_interp_point_bottom = 0;
+
+	/*
+	 * a rectangular region within the chroma plane of the "image".
+	 * Chroma pixels falling inside of this rectangle belongs to the ROI
+	 */
+	int32 chroma_bound_left = 0;
+	int32 chroma_bound_right = 0;
+	int32 chroma_bound_top = 0;
+	int32 chroma_bound_bottom = 0;
+
+	/*
+	 * number of chroma pixels to replicate on the left, right,
+	 * top and bottom edge of the ROI.
+	 */
+	int32 chroma_repeat_left = 0;
+	int32 chroma_repeat_right = 0;
+	int32 chroma_repeat_top = 0;
+	int32 chroma_repeat_bottom = 0;
+
+	/*
+	 * number of luma pixels to replicate on the left, right,
+	 * top and bottom edge of the ROI.
+	 */
+	int32 luma_repeat_left = 0;
+	int32 luma_repeat_right = 0;
+	int32 luma_repeat_top = 0;
+	int32 luma_repeat_bottom = 0;
+
+	boolean chroma_edge_enable;
+
+	uint32 _is_scale_enabled = 0;
+	uint32 _is_yuv_offsite_vertical = 0;
+
+	/* fg edge duplicate */
+	reg = 0x0;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {	/* if scaling enabled */
+
+		_is_scale_enabled = 1;
+
+		/*
+		 * if rotation mode involves a 90 deg rotation, flip
+		 * dst_roi_width with dst_roi_height.
+		 * Scaling ratios is based on source ROI dimensions, and
+		 * dst ROI dimensions before rotation.
+		 */
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width = iBuf->roi.dst_height;
+			dst_roi_height = iBuf->roi.dst_width;
+		} else {
+			dst_roi_width = iBuf->roi.dst_width;
+			dst_roi_height = iBuf->roi.dst_height;
+		}
+
+		/*
+		 * Find out the luma pixels needed for scaling in the
+		 * x direction (LEFT and RIGHT).  Locations of pixels are
+		 * relative to the ROI. Upper-left corner of ROI corresponds
+		 * to coordinates (0,0). Also set the number of luma pixel
+		 * to repeat.
+		 */
+		if (iBuf->roi.width > 3 * dst_roi_width) {
+			/* scale factor < 1/3 */
+			luma_interp_point_left = 0;
+			luma_interp_point_right = (iBuf->roi.width - 1);
+			luma_repeat_left = 0;
+			luma_repeat_right = 0;
+		} else if (iBuf->roi.width == 3 * dst_roi_width) {
+			/* scale factor == 1/3 */
+			luma_interp_point_left = 0;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+			luma_repeat_left = 0;
+			luma_repeat_right = 1;
+		} else if ((iBuf->roi.width > dst_roi_width) &&
+			   (iBuf->roi.width < 3 * dst_roi_width)) {
+			/* 1/3 < scale factor < 1 */
+			luma_interp_point_left = -1;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 1;
+			luma_repeat_left = 1;
+			luma_repeat_right = 1;
+		}
+
+		else if (iBuf->roi.width == dst_roi_width) {
+			/* scale factor == 1 */
+			luma_interp_point_left = -1;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+			luma_repeat_left = 1;
+			luma_repeat_right = 2;
+		} else {	/* (iBuf->roi.width < dst_roi_width) */
+			  /* scale factor > 1 */
+			luma_interp_point_left = -2;
+			luma_interp_point_right = (iBuf->roi.width - 1) + 2;
+			luma_repeat_left = 2;
+			luma_repeat_right = 2;
+		}
+
+		/*
+		 * Find out the number of pixels needed for scaling in the
+		 * y direction (TOP and BOTTOM).  Locations of pixels are
+		 * relative to the ROI. Upper-left corner of ROI corresponds
+		 * to coordinates (0,0). Also set the number of luma pixel
+		 * to repeat.
+		 */
+		if (iBuf->roi.height > 3 * dst_roi_height) {
+			/* scale factor < 1/3 */
+			luma_interp_point_top = 0;
+			luma_interp_point_bottom = (iBuf->roi.height - 1);
+			luma_repeat_top = 0;
+			luma_repeat_bottom = 0;
+		} else if (iBuf->roi.height == 3 * dst_roi_height) {
+			/* scale factor == 1/3 */
+			luma_interp_point_top = 0;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+			luma_repeat_top = 0;
+			luma_repeat_bottom = 1;
+		} else if ((iBuf->roi.height > dst_roi_height) &&
+			   (iBuf->roi.height < 3 * dst_roi_height)) {
+			/* 1/3 < scale factor < 1 */
+			luma_interp_point_top = -1;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 1;
+			luma_repeat_top = 1;
+			luma_repeat_bottom = 1;
+		} else if (iBuf->roi.height == dst_roi_height) {
+			/* scale factor == 1 */
+			luma_interp_point_top = -1;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+			luma_repeat_top = 1;
+			luma_repeat_bottom = 2;
+		} else {	/* (iBuf->roi.height < dst_roi_height) */
+			 /* scale factor > 1 */
+			luma_interp_point_top = -2;
+			luma_interp_point_bottom = (iBuf->roi.height - 1) + 2;
+			luma_repeat_top = 2;
+			luma_repeat_bottom = 2;
+		}
+	}			/* if (iBuf->scale.scale_flag) */
+	else {			/* scaling disabled */
+		/*
+		 * Since no scaling needed, Tile Fetch does not require any
+		 * more luma pixel than what the ROI contains.
+		 */
+		luma_interp_point_left = (int32) 0;
+		luma_interp_point_right = (int32) (iBuf->roi.width - 1);
+		luma_interp_point_top = (int32) 0;
+		luma_interp_point_bottom = (int32) (iBuf->roi.height - 1);
+
+		luma_repeat_left = 0;
+		luma_repeat_right = 0;
+		luma_repeat_top = 0;
+		luma_repeat_bottom = 0;
+	}
+
+	/* After adding the ROI offsets, we have locations of
+	 * luma_interp_points relative to the image.
+	 */
+	luma_interp_point_left += (int32) (iBuf->roi.x);
+	luma_interp_point_right += (int32) (iBuf->roi.x);
+	luma_interp_point_top += (int32) (iBuf->roi.y);
+	luma_interp_point_bottom += (int32) (iBuf->roi.y);
+
+	/*
+	 * After adding the ROI offsets, we have locations of
+	 * chroma_interp_points relative to the image.
+	 */
+	chroma_interp_point_left = luma_interp_point_left;
+	chroma_interp_point_right = luma_interp_point_right;
+	chroma_interp_point_top = luma_interp_point_top;
+	chroma_interp_point_bottom = luma_interp_point_bottom;
+
+	chroma_edge_enable = TRUE;
+	/* find out which chroma pixels are needed for chroma upsampling. */
+	switch (iBuf->mdpImg.imgType) {
+		/*
+		 * cosite in horizontal axis
+		 * fully sampled in vertical axis
+		 */
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_YCRYCB_H2V1:
+		/* floor( luma_interp_point_left / 2 ); */
+		chroma_interp_point_left = luma_interp_point_left >> 1;
+		/* floor( ( luma_interp_point_right + 1 ) / 2 ); */
+		chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+		chroma_interp_point_top = luma_interp_point_top;
+		chroma_interp_point_bottom = luma_interp_point_bottom;
+		break;
+
+		/*
+		 * cosite in horizontal axis
+		 * offsite in vertical axis
+		 */
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		/* floor( luma_interp_point_left / 2) */
+		chroma_interp_point_left = luma_interp_point_left >> 1;
+
+		/* floor( ( luma_interp_point_right + 1 )/ 2 ) */
+		chroma_interp_point_right = (luma_interp_point_right + 1) >> 1;
+
+		/* floor( (luma_interp_point_top - 1 ) / 2 ) */
+		chroma_interp_point_top = (luma_interp_point_top - 1) >> 1;
+
+		/* floor( ( luma_interp_point_bottom + 1 ) / 2 ) */
+		chroma_interp_point_bottom =
+		    (luma_interp_point_bottom + 1) >> 1;
+
+		_is_yuv_offsite_vertical = 1;
+		break;
+
+	default:
+		chroma_edge_enable = FALSE;
+		chroma_interp_point_left = luma_interp_point_left;
+		chroma_interp_point_right = luma_interp_point_right;
+		chroma_interp_point_top = luma_interp_point_top;
+		chroma_interp_point_bottom = luma_interp_point_bottom;
+
+		break;
+	}
+
+	/* only if the image type is in YUV domain, we calculate chroma edge */
+	if (chroma_edge_enable) {
+		/* Defines which chroma pixels belongs to the roi */
+		switch (iBuf->mdpImg.imgType) {
+			/*
+			 * Cosite in horizontal direction, and fully sampled
+			 * in vertical direction.
+			 */
+		case MDP_Y_CBCR_H2V1:
+		case MDP_Y_CRCB_H2V1:
+		case MDP_YCRYCB_H2V1:
+			/*
+			 * width of chroma ROI is 1/2 of size of luma ROI
+			 * height of chroma ROI same as size of luma ROI
+			 */
+			chroma_bound_left = iBuf->roi.x / 2;
+
+			/* there are half as many chroma pixel as luma pixels */
+			chroma_bound_right =
+			    (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+			chroma_bound_top = iBuf->roi.y;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1);
+			break;
+
+		case MDP_Y_CBCR_H2V2:
+		case MDP_Y_CRCB_H2V2:
+			/*
+			 * cosite in horizontal dir, and offsite in vertical dir
+			 * width of chroma ROI is 1/2 of size of luma ROI
+			 * height of chroma ROI is 1/2 of size of luma ROI
+			 */
+
+			chroma_bound_left = iBuf->roi.x / 2;
+			chroma_bound_right =
+			    (iBuf->roi.width + iBuf->roi.x - 1) / 2;
+			chroma_bound_top = iBuf->roi.y / 2;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1) / 2;
+			break;
+
+		default:
+			/*
+			 * If no valid chroma sub-sampling format specified,
+			 * assume 4:4:4 ( i.e. fully sampled).  Set ROI
+			 * boundaries for chroma same as ROI boundaries for
+			 * luma.
+			 */
+			chroma_bound_left = iBuf->roi.x;
+			chroma_bound_right = iBuf->roi.width + iBuf->roi.x - 1;
+			chroma_bound_top = iBuf->roi.y;
+			chroma_bound_bottom =
+			    (iBuf->roi.height + iBuf->roi.y - 1);
+			break;
+		}
+
+		/*
+		 * Knowing which chroma pixels are needed, and which chroma
+		 * pixels belong to the ROI (i.e. available for fetching ),
+		 * calculate how many chroma pixels Tile Fetch needs to
+		 * duplicate.  If any required chroma pixels falls outside
+		 * of the ROI, Tile Fetch must obtain them by replicating
+		 * pixels.
+		 */
+		if (chroma_bound_left > chroma_interp_point_left)
+			chroma_repeat_left =
+			    chroma_bound_left - chroma_interp_point_left;
+		else
+			chroma_repeat_left = 0;
+
+		if (chroma_interp_point_right > chroma_bound_right)
+			chroma_repeat_right =
+			    chroma_interp_point_right - chroma_bound_right;
+		else
+			chroma_repeat_right = 0;
+
+		if (chroma_bound_top > chroma_interp_point_top)
+			chroma_repeat_top =
+			    chroma_bound_top - chroma_interp_point_top;
+		else
+			chroma_repeat_top = 0;
+
+		if (chroma_interp_point_bottom > chroma_bound_bottom)
+			chroma_repeat_bottom =
+			    chroma_interp_point_bottom - chroma_bound_bottom;
+		else
+			chroma_repeat_bottom = 0;
+
+		if (_is_scale_enabled && (iBuf->roi.height == 1)
+		    && _is_yuv_offsite_vertical) {
+			chroma_repeat_bottom = 3;
+			chroma_repeat_top = 0;
+		}
+	}
+	/* make sure chroma repeats are non-negative */
+	if ((chroma_repeat_left < 0) || (chroma_repeat_right < 0) ||
+	    (chroma_repeat_top < 0) || (chroma_repeat_bottom < 0))
+		return -1;
+
+	/* make sure chroma repeats are no larger than 3 pixels */
+	if ((chroma_repeat_left > 3) || (chroma_repeat_right > 3) ||
+	    (chroma_repeat_top > 3) || (chroma_repeat_bottom > 3))
+		return -1;
+
+	/* make sure luma repeats are non-negative */
+	if ((luma_repeat_left < 0) || (luma_repeat_right < 0) ||
+	    (luma_repeat_top < 0) || (luma_repeat_bottom < 0))
+		return -1;
+
+	/* make sure luma repeats are no larger than 3 pixels */
+	if ((luma_repeat_left > 3) || (luma_repeat_right > 3) ||
+	    (luma_repeat_top > 3) || (luma_repeat_bottom > 3))
+		return -1;
+
+	/* write chroma_repeat_left to register */
+	reg |= (chroma_repeat_left & 3) << MDP_LEFT_CHROMA;
+
+	/* write chroma_repeat_right to register */
+	reg |= (chroma_repeat_right & 3) << MDP_RIGHT_CHROMA;
+
+	/* write chroma_repeat_top to register */
+	reg |= (chroma_repeat_top & 3) << MDP_TOP_CHROMA;
+
+	/* write chroma_repeat_bottom to register */
+	reg |= (chroma_repeat_bottom & 3) << MDP_BOTTOM_CHROMA;
+
+	/* write luma_repeat_left to register */
+	reg |= (luma_repeat_left & 3) << MDP_LEFT_LUMA;
+
+	/* write luma_repeat_right to register */
+	reg |= (luma_repeat_right & 3) << MDP_RIGHT_LUMA;
+
+	/* write luma_repeat_top to register */
+	reg |= (luma_repeat_top & 3) << MDP_TOP_LUMA;
+
+	/* write luma_repeat_bottom to register */
+	reg |= (luma_repeat_bottom & 3) << MDP_BOTTOM_LUMA;
+
+	/* done with reg */
+	*dup = reg;
+
+	/* bg edge duplicate */
+	reg = 0x0;
+
+	switch (iBuf->ibuf_type) {
+	case MDP_Y_CBCR_H2V2:
+	case MDP_Y_CRCB_H2V2:
+		/*
+		 * Edge condition for MDP_Y_CRCB/CBCR_H2V2 cosite only.
+		 * For 420 cosite, 1 chroma replicated on all sides except
+		 * left, so reg 101b8 should be 0x0209. For 420 offsite,
+		 * 1 chroma replicated all sides.
+		 */
+		if (iBuf->roi.lcd_y == 0) {
+			reg |= BIT(MDP_TOP_CHROMA);
+		}
+
+		if ((iBuf->roi.lcd_y + iBuf->roi.dst_height) ==
+		    iBuf->ibuf_height) {
+			reg |= BIT(MDP_BOTTOM_CHROMA);
+		}
+
+		if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+		     iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+			reg |= BIT(MDP_RIGHT_CHROMA);
+		}
+
+		break;
+
+	case MDP_Y_CBCR_H2V1:
+	case MDP_Y_CRCB_H2V1:
+	case MDP_YCRYCB_H2V1:
+		if (((iBuf->roi.lcd_x + iBuf->roi.dst_width) ==
+		     iBuf->ibuf_width) && ((iBuf->roi.dst_width % 2) == 0)) {
+			reg |= BIT(MDP_RIGHT_CHROMA);
+		}
+		break;
+	default:
+		break;
+	}
+
+	*dup2 = reg;
+
+	return 0;
+}
+
+#define ADJUST_IP		/* for 1/3 scale factor fix */
+
+static int mdp_calc_scale_params(
+/* ROI origin coordinate for the dimension */
+					uint32 org,
+/* src ROI dimension */
+					uint32 dim_in,
+/* scaled ROI dimension*/
+					uint32 dim_out,
+/* is this ROI width dimension? */
+					boolean is_W,
+/* initial phase location address */
+					int32 *phase_init_ptr,
+/* phase increment location address */
+					uint32 *phase_step_ptr,
+/* ROI start over-fetch location address */
+					uint32 *num_repl_beg_ptr,
+/* ROI end over-fetch location address */
+					uint32 *num_repl_end_ptr)
+{
+	boolean rpa_on = FALSE;
+	int init_phase = 0;
+	uint32 beg_of = 0;
+	uint32 end_of = 0;
+	uint64 numer = 0;
+	uint64 denom = 0;
+	/*uint64 inverter = 1; */
+	int64 point5 = 1;
+	int64 one = 1;
+	int64 k1, k2, k3, k4;	/* linear equation coefficients */
+	uint64 int_mask;
+	uint64 fract_mask;
+	uint64 Os;
+	int64 Osprime;
+	int64 Od;
+	int64 Odprime;
+	int64 Oreq;
+	uint64 Es;
+	uint64 Ed;
+	uint64 Ereq;
+#ifdef ADJUST_IP
+	int64 IP64;
+	int64 delta;
+#endif
+	uint32 mult;
+
+	/*
+	 * The phase accumulator should really be rational for all cases in a
+	 * general purpose polyphase scaler for a tiled architecture with
+	 * non-zero * origin capability because there is no way to represent
+	 * certain scale factors in fixed point regardless of precision.
+	 * The error incurred in attempting to use fixed point is most
+	 * eggregious for SF where 1/SF is an integral multiple of 1/3.
+	 *
+	 * However, since the MDP2 has already been committed to HW, we
+	 * only use the rational phase accumulator (RPA) when 1/SF is an
+	 * integral multiple of 1/3.  This will help minimize regressions in
+	 * matching the HW to the C-Sim.
+	 */
+	/*
+	 * Set the RPA flag for this dimension.
+	 *
+	 * In order for 1/SF (dim_in/dim_out) to be an integral multiple of
+	 * 1/3, dim_out must be an integral multiple of 3.
+	 */
+	if (!(dim_out % 3)) {
+		mult = dim_out / 3;
+		rpa_on = (!(dim_in % mult));
+	}
+
+	numer = dim_out;
+	denom = dim_in;
+
+	/*
+	 * convert to U30.34 before division
+	 *
+	 * The K vectors carry 4 extra bits of precision
+	 * and are rounded.
+	 *
+	 * We initially go 5 bits over then round by adding
+	 * 1 and right shifting by 1
+	 * so final result is U31.33
+	 */
+	numer <<= PQF_PLUS_5;
+
+	/* now calculate the scale factor (aka k3) */
+	k3 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+	/* check scale factor for legal range [0.25 - 4.0] */
+	if (((k3 >> 4) < (1LL << PQF_MINUS_2)) ||
+	    ((k3 >> 4) > (1LL << PQF_PLUS_2))) {
+		return -1;
+	}
+
+	/* calculate inverse scale factor (aka k1) for phase init */
+	numer = dim_in;
+	denom = dim_out;
+	numer <<= PQF_PLUS_5;
+	k1 = ((mdp_do_div(numer, denom) + 1) >> 1);
+
+	/*
+	 * calculate initial phase and ROI overfetch
+	 */
+	/* convert point5 & one to S39.24 (will always be positive) */
+	point5 <<= (PQF_PLUS_4 - 1);
+	one <<= PQF_PLUS_4;
+	k2 = ((k1 - one) >> 1);
+	init_phase = (int)(k2 >> 4);
+	k4 = ((k3 - one) >> 1);
+	if (k3 == one) {
+		/* the simple case; SF = 1.0 */
+		beg_of = 1;
+		end_of = 2;
+	} else {
+		/* calculate the masks */
+		fract_mask = one - 1;
+		int_mask = ~fract_mask;
+
+		if (!rpa_on) {
+			/*
+			 * FIXED POINT IMPLEMENTATION
+			 */
+			if (!org) {
+				/* A fairly simple case; ROI origin = 0 */
+				if (k1 < one) {
+					/* upscaling */
+					beg_of = end_of = 2;
+				}
+				/* 0.33 <= SF < 1.0 */
+				else if (k1 < (3LL << PQF_PLUS_4))
+					beg_of = end_of = 1;
+				/* 0.33 == SF */
+				else if (k1 == (3LL << PQF_PLUS_4)) {
+					beg_of = 0;
+					end_of = 1;
+				}
+				/* 0.25 <= SF < 0.33 */
+				else
+					beg_of = end_of = 0;
+			} else {
+				/*
+				 * The complicated case; ROI origin != 0
+				 * init_phase needs to be adjusted
+				 * OF is also position dependent
+				 */
+
+				/* map (org - .5) into destination space */
+				Os = ((uint64) org << 1) - 1;
+				Od = ((k3 * Os) >> 1) + k4;
+
+				/* take the ceiling */
+				Odprime = (Od & int_mask);
+				if (Odprime != Od)
+					Odprime += one;
+
+				/* now map that back to source space */
+				Osprime = (k1 * (Odprime >> PQF_PLUS_4)) + k2;
+
+				/* then floor & decrement to calculate the required
+				   starting coordinate */
+				Oreq = (Osprime & int_mask) - one;
+
+				/* calculate end coord in destination space then map to
+				   source space */
+				Ed = Odprime +
+				    ((uint64) dim_out << PQF_PLUS_4) - one;
+				Es = (k1 * (Ed >> PQF_PLUS_4)) + k2;
+
+				/* now floor & increment by 2 to calculate the required
+				   ending coordinate */
+				Ereq = (Es & int_mask) + (one << 1);
+
+				/* calculate initial phase */
+#ifdef ADJUST_IP
+
+				IP64 = Osprime - Oreq;
+				delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+				IP64 -= delta;
+
+				/* limit to valid range before the left shift */
+				delta = (IP64 & (1LL << 63)) ? 4 : -4;
+				delta <<= PQF_PLUS_4;
+				while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+					IP64 += delta;
+
+				/* right shift to account for extra bits of precision */
+				init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+				/* just calculate the real initial phase */
+				init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+				/* calculate the overfetch */
+				beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+				end_of =
+				    (uint32) (Ereq >> PQF_PLUS_4) - (org +
+								     dim_in -
+								     1);
+			}
+		} else {
+			/*
+			 * RPA IMPLEMENTATION
+			 *
+			 * init_phase needs to be calculated in all RPA_on cases
+			 * because it's a numerator, not a fixed point value.
+			 */
+
+			/* map (org - .5) into destination space */
+			Os = ((uint64) org << PQF_PLUS_4) - point5;
+			Od = mdp_do_div((dim_out * (Os + point5)),
+					dim_in) - point5;
+
+			/* take the ceiling */
+			Odprime = (Od & int_mask);
+			if (Odprime != Od)
+				Odprime += one;
+
+			/* now map that back to source space */
+			Osprime =
+			    mdp_do_div((dim_in * (Odprime + point5)),
+				       dim_out) - point5;
+
+			/* then floor & decrement to calculate the required
+			   starting coordinate */
+			Oreq = (Osprime & int_mask) - one;
+
+			/* calculate end coord in destination space then map to
+			   source space */
+			Ed = Odprime + ((uint64) dim_out << PQF_PLUS_4) - one;
+			Es = mdp_do_div((dim_in * (Ed + point5)),
+					dim_out) - point5;
+
+			/* now floor & increment by 2 to calculate the required
+			   ending coordinate */
+			Ereq = (Es & int_mask) + (one << 1);
+
+			/* calculate initial phase */
+
+#ifdef ADJUST_IP
+
+			IP64 = Osprime - Oreq;
+			delta = ((int64) (org) << PQF_PLUS_4) - Oreq;
+			IP64 -= delta;
+
+			/* limit to valid range before the left shift */
+			delta = (IP64 & (1LL << 63)) ? 4 : -4;
+			delta <<= PQF_PLUS_4;
+			while (abs((int)(IP64 >> PQF_PLUS_4)) > 4)
+				IP64 += delta;
+
+			/* right shift to account for extra bits of precision */
+			init_phase = (int)(IP64 >> 4);
+
+#else /* ADJUST_IP */
+
+			/* just calculate the real initial phase */
+			init_phase = (int)((Osprime - Oreq) >> 4);
+
+#endif /* ADJUST_IP */
+
+			/* calculate the overfetch */
+			beg_of = org - (uint32) (Oreq >> PQF_PLUS_4);
+			end_of =
+			    (uint32) (Ereq >> PQF_PLUS_4) - (org + dim_in - 1);
+		}
+	}
+
+	/* return the scale parameters */
+	*phase_init_ptr = init_phase;
+	*phase_step_ptr = (uint32) (k1 >> 4);
+	*num_repl_beg_ptr = beg_of;
+	*num_repl_end_ptr = end_of;
+
+	return 0;
+}
+
+static uint8 *mdp_adjust_rot_addr(MDPIBUF *iBuf, uint8 *addr, uint32 uv)
+{
+	uint32 dest_ystride = iBuf->ibuf_width * iBuf->bpp;
+	uint32 h_slice = 1;
+
+	if (uv && ((iBuf->ibuf_type == MDP_Y_CBCR_H2V2) ||
+		(iBuf->ibuf_type == MDP_Y_CRCB_H2V2)))
+		h_slice = 2;
+
+	if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_ROT90) ^
+	    MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_LR)) {
+		addr =
+		    addr + (iBuf->roi.dst_width -
+			    MIN(16, iBuf->roi.dst_width)) * iBuf->bpp;
+	}
+	if (MDP_CHKBIT(iBuf->mdpImg.mdpOp, MDPOP_UD)) {
+		addr =
+		    addr + ((iBuf->roi.dst_height -
+			MIN(16, iBuf->roi.dst_height))/h_slice) * dest_ystride;
+	}
+
+	return addr;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+	uint32 dst_roi_width_scale;
+	uint32 dst_roi_height_scale;
+	boolean use_pr;
+	uint32 phasex_step = 0;
+	uint32 phasey_step = 0;
+	int32 phasex_init = 0;
+	int32 phasey_init = 0;
+	uint32 lines_dup = 0;
+	uint32 lines_dup_bg = 0;
+	uint32 dummy;
+	uint32 mdp_blur = 0;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width_scale = dst_roi_height;
+			dst_roi_height_scale = dst_roi_width;
+		} else {
+			dst_roi_width_scale = dst_roi_width;
+			dst_roi_height_scale = dst_roi_height;
+		}
+
+		mdp_blur = iBuf->mdpImg.mdpOp & MDPOP_BLUR;
+
+		if ((dst_roi_width_scale != iBuf->roi.width) ||
+		    (dst_roi_height_scale != iBuf->roi.height) ||
+			mdp_blur) {
+			*pppop_reg_ptr |=
+			    (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+		/* let's use SHIM logic to calculate the partial ROI scaling */
+#if 0
+			phasex_step =
+			    (uint32) mdp_do_div(0x20000000 * iBuf->roi.width,
+						dst_roi_width_scale);
+			phasey_step =
+			    (uint32) mdp_do_div(0x20000000 * iBuf->roi.height,
+						dst_roi_height_scale);
+
+/*
+    phasex_step= ((long long) iBuf->roi.width * 0x20000000)/dst_roi_width_scale;
+    phasey_step= ((long long)iBuf->roi.height * 0x20000000)/dst_roi_height_scale;
+*/
+
+			phasex_init =
+			    (((long long)phasex_step - 0x20000000) >> 1);
+			phasey_init =
+			    (((long long)phasey_step - 0x20000000) >> 1);
+
+#else
+			mdp_calc_scale_params(iBuf->roi.x, iBuf->roi.width,
+					      dst_roi_width_scale, 1,
+					      &phasex_init, &phasex_step,
+					      &dummy, &dummy);
+			mdp_calc_scale_params(iBuf->roi.y, iBuf->roi.height,
+					      dst_roi_height_scale, 0,
+					      &phasey_init, &phasey_step,
+					      &dummy, &dummy);
+#endif
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+				 phasex_init);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+				 phasey_init);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+				 phasex_step);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+				 phasey_step);
+
+			use_pr = (inputRGB) && (outputRGB);
+
+			if ((dst_roi_width_scale > iBuf->roi.width) ||
+			    (dst_roi_height_scale > iBuf->roi.height)) {
+				if ((use_pr)
+				    && (mdp_curr_up_scale_xy !=
+					MDP_PR_SCALE_UP)) {
+					mdp_load_pr_upscale_table();
+					mdp_curr_up_scale_xy = MDP_PR_SCALE_UP;
+				} else if ((!use_pr)
+					   && (mdp_curr_up_scale_xy !=
+					       MDP_BC_SCALE_UP)) {
+					mdp_load_bc_upscale_table();
+					mdp_curr_up_scale_xy = MDP_BC_SCALE_UP;
+				}
+			}
+
+			if (mdp_blur) {
+				load_scale_table(mdp_gaussian_blur_table,
+					ARRAY_SIZE(mdp_gaussian_blur_table));
+				mdp_curr_down_scale_x = MDP_SCALE_BLUR;
+				mdp_curr_down_scale_y = MDP_SCALE_BLUR;
+			}
+
+			/* 0.2 < x <= 1 scaling factor */
+			if ((dst_roi_width_scale <= iBuf->roi.width) &&
+				!mdp_blur) {
+				if (((dst_roi_width_scale * 10) /
+				     iBuf->roi.width) > 8) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT8_1)) {
+						mdp_load_pr_downscale_table_x_point8TO1
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT8_1;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT8_1)) {
+						mdp_load_bc_downscale_table_x_point8TO1
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT8_1;
+					}
+				} else
+				    if (((dst_roi_width_scale * 10) /
+					 iBuf->roi.width) > 6) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT6_POINT8)) {
+						mdp_load_pr_downscale_table_x_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT6_POINT8;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT6_POINT8))
+					{
+						mdp_load_bc_downscale_table_x_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT6_POINT8;
+					}
+				} else
+				    if (((dst_roi_width_scale * 10) /
+					 iBuf->roi.width) > 4) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT4_POINT6)) {
+						mdp_load_pr_downscale_table_x_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT4_POINT6;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT4_POINT6))
+					{
+						mdp_load_bc_downscale_table_x_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT4_POINT6;
+					}
+				} else {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_x !=
+						MDP_PR_SCALE_POINT2_POINT4)) {
+						mdp_load_pr_downscale_table_x_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_PR_SCALE_POINT2_POINT4;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_x !=
+						       MDP_BC_SCALE_POINT2_POINT4))
+					{
+						mdp_load_bc_downscale_table_x_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_x =
+						    MDP_BC_SCALE_POINT2_POINT4;
+					}
+				}
+			}
+			/* 0.2 < y <= 1 scaling factor */
+			if ((dst_roi_height_scale <= iBuf->roi.height) &&
+				!mdp_blur) {
+				if (((dst_roi_height_scale * 10) /
+				     iBuf->roi.height) > 8) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT8_1)) {
+						mdp_load_pr_downscale_table_y_point8TO1
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT8_1;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT8_1)) {
+						mdp_load_bc_downscale_table_y_point8TO1
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT8_1;
+					}
+				} else
+				    if (((dst_roi_height_scale * 10) /
+					 iBuf->roi.height) > 6) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT6_POINT8)) {
+						mdp_load_pr_downscale_table_y_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT6_POINT8;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT6_POINT8))
+					{
+						mdp_load_bc_downscale_table_y_point6TOpoint8
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT6_POINT8;
+					}
+				} else
+				    if (((dst_roi_height_scale * 10) /
+					 iBuf->roi.height) > 4) {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT4_POINT6)) {
+						mdp_load_pr_downscale_table_y_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT4_POINT6;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT4_POINT6))
+					{
+						mdp_load_bc_downscale_table_y_point4TOpoint6
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT4_POINT6;
+					}
+				} else {
+					if ((use_pr)
+					    && (mdp_curr_down_scale_y !=
+						MDP_PR_SCALE_POINT2_POINT4)) {
+						mdp_load_pr_downscale_table_y_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_PR_SCALE_POINT2_POINT4;
+					} else if ((!use_pr)
+						   && (mdp_curr_down_scale_y !=
+						       MDP_BC_SCALE_POINT2_POINT4))
+					{
+						mdp_load_bc_downscale_table_y_point2TOpoint4
+						    ();
+						mdp_curr_down_scale_y =
+						    MDP_BC_SCALE_POINT2_POINT4;
+					}
+				}
+			}
+		} else {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+		}
+	}
+	/* setting edge condition here after scaling check */
+	if (mdp_get_edge_cond(iBuf, &lines_dup, &lines_dup_bg))
+		printk(KERN_ERR "msm_fb: mdp_get_edge_cond() error!\n");
+
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01b8, lines_dup);
+	MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x01bc, lines_dup_bg);
+}
+
+void mdp_init_scale_table(void)
+{
+	mdp_curr_up_scale_xy = MDP_INIT_SCALE;
+	mdp_curr_down_scale_x = MDP_INIT_SCALE;
+	mdp_curr_down_scale_y = MDP_INIT_SCALE;
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+	*src0 += (x + y * width) * bpp;
+
+	/* if it's dest/bg buffer, we need to adjust it for rotation */
+	if (layer != 0)
+		*src0 = mdp_adjust_rot_addr(iBuf, *src0, 0);
+
+	if (*src1) {
+		/*
+		 * MDP_Y_CBCR_H2V2/MDP_Y_CRCB_H2V2 cosite for now
+		 * we need to shift x direction same as y dir for offsite
+		 */
+		*src1 +=
+		    ((x / h_slice) * h_slice +
+		     ((y == 0) ? 0 : ((y + 1) / v_slice - 1) * width)) * bpp;
+
+		/* if it's dest/bg buffer, we need to adjust it for rotation */
+		if (layer != 0)
+			*src1 = mdp_adjust_rot_addr(iBuf, *src1, 1);
+	}
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+	if (perPixelAlpha) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+	} else {
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.alpha == 0xff)) {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+		}
+
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+			*pppop_reg_ptr |=
+			    PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+			    PPP_OP_BLEND_CONSTANT_ALPHA |
+			    PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+			    PPP_BLEND_CALPHA_TRNASP;
+
+			*alpha = iBuf->mdpImg.alpha;
+			*tpVal = iBuf->mdpImg.tpVal;
+		} else {
+			if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP) {
+				*pppop_reg_ptr |= PPP_OP_ROT_ON |
+				    PPP_OP_BLEND_ON |
+				    PPP_OP_BLEND_SRCPIXEL_TRANSP;
+				*tpVal = iBuf->mdpImg.tpVal;
+			} else if (iBuf->mdpImg.mdpOp & MDPOP_ALPHAB) {
+				*pppop_reg_ptr |= PPP_OP_ROT_ON |
+				    PPP_OP_BLEND_ON |
+				    PPP_OP_BLEND_ALPHA_BLEND_NORMAL |
+				    PPP_OP_BLEND_CONSTANT_ALPHA;
+				*alpha = iBuf->mdpImg.alpha;
+			}
+		}
+	}
+}
diff --git a/drivers/staging/msm/mdp_ppp_v31.c b/drivers/staging/msm/mdp_ppp_v31.c
new file mode 100644
index 0000000..76495db
--- /dev/null
+++ b/drivers/staging/msm/mdp_ppp_v31.c
@@ -0,0 +1,828 @@
+/* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <asm/div64.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+
+#define MDP_SCALE_COEFF_NUM      32
+#define MDP_SCALE_0P2_TO_0P4_INDEX 0
+#define MDP_SCALE_0P4_TO_0P6_INDEX 32
+#define MDP_SCALE_0P6_TO_0P8_INDEX 64
+#define MDP_SCALE_0P8_TO_8P0_INDEX 96
+#define MDP_SCALE_COEFF_MASK 0x3ff
+
+#define MDP_SCALE_PR  0
+#define MDP_SCALE_FIR 1
+
+static uint32 mdp_scale_0p8_to_8p0_mode;
+static uint32 mdp_scale_0p6_to_0p8_mode;
+static uint32 mdp_scale_0p4_to_0p6_mode;
+static uint32 mdp_scale_0p2_to_0p4_mode;
+
+/* -------- All scaling range, "pixel repeat" -------- */
+static int16 mdp_scale_pixel_repeat_C0[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C1[MDP_SCALE_COEFF_NUM] = {
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511,
+	511, 511, 511, 511, 511, 511, 511, 511
+};
+
+static int16 mdp_scale_pixel_repeat_C2[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int16 mdp_scale_pixel_repeat_C3[MDP_SCALE_COEFF_NUM] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* --------------------------- FIR ------------------------------------- */
+/* -------- Downscale, ranging from 0.8x to 8.0x of original size -------- */
+
+static int16 mdp_scale_0p8_to_8p0_C0[MDP_SCALE_COEFF_NUM] = {
+	0, -7, -13, -19, -24, -28, -32, -34, -37, -39,
+	-40, -41, -41, -41, -40, -40, -38, -37, -35, -33,
+	-31, -29, -26, -24, -21, -18, -15, -13, -10, -7,
+	-5, -2
+};
+
+static int16 mdp_scale_0p8_to_8p0_C1[MDP_SCALE_COEFF_NUM] = {
+	511, 507, 501, 494, 485, 475, 463, 450, 436, 422,
+	405, 388, 370, 352, 333, 314, 293, 274, 253, 233,
+	213, 193, 172, 152, 133, 113, 95, 77, 60, 43,
+	28, 13
+};
+
+static int16 mdp_scale_0p8_to_8p0_C2[MDP_SCALE_COEFF_NUM] = {
+	0, 13, 28, 43, 60, 77, 95, 113, 133, 152,
+	172, 193, 213, 233, 253, 274, 294, 314, 333, 352,
+	370, 388, 405, 422, 436, 450, 463, 475, 485, 494,
+	501, 507,
+};
+
+static int16 mdp_scale_0p8_to_8p0_C3[MDP_SCALE_COEFF_NUM] = {
+	0, -2, -5, -7, -10, -13, -15, -18, -21, -24,
+	-26, -29, -31, -33, -35, -37, -38, -40, -40, -41,
+	-41, -41, -40, -39, -37, -34, -32, -28, -24, -19,
+	-13, -7
+};
+
+/* -------- Downscale, ranging from 0.6x to 0.8x of original size -------- */
+
+static int16 mdp_scale_0p6_to_0p8_C0[MDP_SCALE_COEFF_NUM] = {
+	104, 96, 89, 82, 75, 68, 61, 55, 49, 43,
+	38, 33, 28, 24, 20, 16, 12, 9, 6, 4,
+	2, 0, -2, -4, -5, -6, -7, -7, -8, -8,
+	-8, -8
+};
+
+static int16 mdp_scale_0p6_to_0p8_C1[MDP_SCALE_COEFF_NUM] = {
+	303, 303, 302, 300, 298, 296, 293, 289, 286, 281,
+	276, 270, 265, 258, 252, 245, 238, 230, 223, 214,
+	206, 197, 189, 180, 172, 163, 154, 145, 137, 128,
+	120, 112
+};
+
+static int16 mdp_scale_0p6_to_0p8_C2[MDP_SCALE_COEFF_NUM] = {
+	112, 120, 128, 137, 145, 154, 163, 172, 180, 189,
+	197, 206, 214, 223, 230, 238, 245, 252, 258, 265,
+	270, 276, 281, 286, 289, 293, 296, 298, 300, 302,
+	303, 303
+};
+
+static int16 mdp_scale_0p6_to_0p8_C3[MDP_SCALE_COEFF_NUM] = {
+	-8, -8, -8, -8, -7, -7, -6, -5, -4, -2,
+	0, 2, 4, 6, 9, 12, 16, 20, 24, 28,
+	33, 38, 43, 49, 55, 61, 68, 75, 82, 89,
+	96, 104
+};
+
+/* -------- Downscale, ranging from 0.4x to 0.6x of original size -------- */
+
+static int16 mdp_scale_0p4_to_0p6_C0[MDP_SCALE_COEFF_NUM] = {
+	136, 132, 128, 123, 119, 115, 111, 107, 103, 98,
+	95, 91, 87, 84, 80, 76, 73, 69, 66, 62,
+	59, 57, 54, 50, 47, 44, 41, 39, 36, 33,
+	32, 29
+};
+
+static int16 mdp_scale_0p4_to_0p6_C1[MDP_SCALE_COEFF_NUM] = {
+	206, 205, 204, 204, 201, 200, 199, 197, 196, 194,
+	191, 191, 189, 185, 184, 182, 180, 178, 176, 173,
+	170, 168, 165, 162, 160, 157, 155, 152, 148, 146,
+	142, 140
+};
+
+static int16 mdp_scale_0p4_to_0p6_C2[MDP_SCALE_COEFF_NUM] = {
+	140, 142, 146, 148, 152, 155, 157, 160, 162, 165,
+	168, 170, 173, 176, 178, 180, 182, 184, 185, 189,
+	191, 191, 194, 196, 197, 199, 200, 201, 204, 204,
+	205, 206
+};
+
+static int16 mdp_scale_0p4_to_0p6_C3[MDP_SCALE_COEFF_NUM] = {
+	29, 32, 33, 36, 39, 41, 44, 47, 50, 54,
+	57, 59, 62, 66, 69, 73, 76, 80, 84, 87,
+	91, 95, 98, 103, 107, 111, 115, 119, 123, 128,
+	132, 136
+};
+
+/* -------- Downscale, ranging from 0.2x to 0.4x of original size -------- */
+
+static int16 mdp_scale_0p2_to_0p4_C0[MDP_SCALE_COEFF_NUM] = {
+	131, 131, 130, 129, 128, 127, 127, 126, 125, 125,
+	124, 123, 123, 121, 120, 119, 119, 118, 117, 117,
+	116, 115, 115, 114, 113, 112, 111, 110, 109, 109,
+	108, 107
+};
+
+static int16 mdp_scale_0p2_to_0p4_C1[MDP_SCALE_COEFF_NUM] = {
+	141, 140, 140, 140, 140, 139, 138, 138, 138, 137,
+	137, 137, 136, 137, 137, 137, 136, 136, 136, 135,
+	135, 135, 134, 134, 134, 134, 134, 133, 133, 132,
+	132, 132
+};
+
+static int16 mdp_scale_0p2_to_0p4_C2[MDP_SCALE_COEFF_NUM] = {
+	132, 132, 132, 133, 133, 134, 134, 134, 134, 134,
+	135, 135, 135, 136, 136, 136, 137, 137, 137, 136,
+	137, 137, 137, 138, 138, 138, 139, 140, 140, 140,
+	140, 141
+};
+
+static int16 mdp_scale_0p2_to_0p4_C3[MDP_SCALE_COEFF_NUM] = {
+	107, 108, 109, 109, 110, 111, 112, 113, 114, 115,
+	115, 116, 117, 117, 118, 119, 119, 120, 121, 123,
+	123, 124, 125, 125, 126, 127, 127, 128, 129, 130,
+	131, 131
+};
+
+static void mdp_update_scale_table(int index, int16 *c0, int16 *c1,
+				   int16 *c2, int16 *c3)
+{
+	int i, val;
+
+	for (i = 0; i < MDP_SCALE_COEFF_NUM; i++) {
+		val =
+		    ((MDP_SCALE_COEFF_MASK & c1[i]) << 16) |
+		    (MDP_SCALE_COEFF_MASK & c0[i]);
+		MDP_OUTP(MDP_PPP_SCALE_COEFF_LSBn(index), val);
+		val =
+		    ((MDP_SCALE_COEFF_MASK & c3[i]) << 16) |
+		    (MDP_SCALE_COEFF_MASK & c2[i]);
+		MDP_OUTP(MDP_PPP_SCALE_COEFF_MSBn(index), val);
+		index++;
+	}
+}
+
+void mdp_init_scale_table(void)
+{
+	mdp_scale_0p2_to_0p4_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P2_TO_0P4_INDEX,
+			       mdp_scale_0p2_to_0p4_C0,
+			       mdp_scale_0p2_to_0p4_C1,
+			       mdp_scale_0p2_to_0p4_C2,
+			       mdp_scale_0p2_to_0p4_C3);
+
+	mdp_scale_0p4_to_0p6_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P4_TO_0P6_INDEX,
+			       mdp_scale_0p4_to_0p6_C0,
+			       mdp_scale_0p4_to_0p6_C1,
+			       mdp_scale_0p4_to_0p6_C2,
+			       mdp_scale_0p4_to_0p6_C3);
+
+	mdp_scale_0p6_to_0p8_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P6_TO_0P8_INDEX,
+			       mdp_scale_0p6_to_0p8_C0,
+			       mdp_scale_0p6_to_0p8_C1,
+			       mdp_scale_0p6_to_0p8_C2,
+			       mdp_scale_0p6_to_0p8_C3);
+
+	mdp_scale_0p8_to_8p0_mode = MDP_SCALE_FIR;
+	mdp_update_scale_table(MDP_SCALE_0P8_TO_8P0_INDEX,
+			       mdp_scale_0p8_to_8p0_C0,
+			       mdp_scale_0p8_to_8p0_C1,
+			       mdp_scale_0p8_to_8p0_C2,
+			       mdp_scale_0p8_to_8p0_C3);
+}
+
+static long long mdp_do_div(long long num, long long den)
+{
+	do_div(num, den);
+	return num;
+}
+
+#define SCALER_PHASE_BITS 29
+#define HAL_MDP_PHASE_STEP_2P50    0x50000000
+#define HAL_MDP_PHASE_STEP_1P66    0x35555555
+#define HAL_MDP_PHASE_STEP_1P25    0x28000000
+
+struct phase_val {
+	int phase_init_x;
+	int phase_init_y;
+	int phase_step_x;
+	int phase_step_y;
+};
+
+static void mdp_calc_scaleInitPhase_3p1(uint32 in_w,
+					uint32 in_h,
+					uint32 out_w,
+					uint32 out_h,
+					boolean is_rotate,
+					boolean is_pp_x,
+					boolean is_pp_y, struct phase_val *pval)
+{
+	uint64 dst_ROI_width;
+	uint64 dst_ROI_height;
+	uint64 src_ROI_width;
+	uint64 src_ROI_height;
+
+	/*
+	 * phase_step_x, phase_step_y, phase_init_x and phase_init_y
+	 * are represented in fixed-point, unsigned 3.29 format
+	 */
+	uint32 phase_step_x = 0;
+	uint32 phase_step_y = 0;
+	uint32 phase_init_x = 0;
+	uint32 phase_init_y = 0;
+	uint32 yscale_filter_sel, xscale_filter_sel;
+	uint32 scale_unit_sel_x, scale_unit_sel_y;
+
+	uint64 numerator, denominator;
+	uint64 temp_dim;
+
+	src_ROI_width = in_w;
+	src_ROI_height = in_h;
+	dst_ROI_width = out_w;
+	dst_ROI_height = out_h;
+
+	/* if there is a 90 degree rotation */
+	if (is_rotate) {
+		/* decide whether to use FIR or M/N for scaling */
+
+		/* if down-scaling by a factor smaller than 1/4 */
+		if (src_ROI_width > (4 * dst_ROI_height))
+			scale_unit_sel_x = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_x = 0;	/* use FIR scalar */
+
+		/* if down-scaling by a factor smaller than 1/4 */
+		if (src_ROI_height > (4 * dst_ROI_width))
+			scale_unit_sel_y = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_y = 0;	/* use FIR scalar */
+	} else {
+		/* decide whether to use FIR or M/N for scaling */
+
+		if (src_ROI_width > (4 * dst_ROI_width))
+			scale_unit_sel_x = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_x = 0;	/* use FIR scalar */
+
+		if (src_ROI_height > (4 * dst_ROI_height))
+			scale_unit_sel_y = 1;	/* use M/N scalar */
+		else
+			scale_unit_sel_y = 0;	/* use FIR scalar */
+
+	}
+
+	/* if there is a 90 degree rotation */
+	if (is_rotate) {
+		/* swap the width and height of dst ROI */
+		temp_dim = dst_ROI_width;
+		dst_ROI_width = dst_ROI_height;
+		dst_ROI_height = temp_dim;
+	}
+
+	/* calculate phase step for the x direction */
+
+	/* if destination is only 1 pixel wide, the value of phase_step_x
+	   is unimportant. Assigning phase_step_x to src ROI width
+	   as an arbitrary value. */
+	if (dst_ROI_width == 1)
+		phase_step_x = (uint32) ((src_ROI_width) << SCALER_PHASE_BITS);
+
+	/* if using FIR scalar */
+	else if (scale_unit_sel_x == 0) {
+
+		/* Calculate the quotient ( src_ROI_width - 1 ) / ( dst_ROI_width - 1)
+		   with u3.29 precision. Quotient is rounded up to the larger
+		   29th decimal point. */
+		numerator = (src_ROI_width - 1) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_width - 1);	/* never equals to 0 because of the "( dst_ROI_width == 1 ) case" */
+		phase_step_x = (uint32) mdp_do_div((numerator + denominator - 1), denominator);	/* divide and round up to the larger 29th decimal point. */
+
+	}
+
+	/* if M/N scalar */
+	else if (scale_unit_sel_x == 1) {
+		/* Calculate the quotient ( src_ROI_width ) / ( dst_ROI_width)
+		   with u3.29 precision. Quotient is rounded down to the
+		   smaller 29th decimal point. */
+		numerator = (src_ROI_width) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_width);
+		phase_step_x = (uint32) mdp_do_div(numerator, denominator);
+	}
+	/* calculate phase step for the y direction */
+
+	/* if destination is only 1 pixel wide, the value of
+	   phase_step_x is unimportant. Assigning phase_step_x
+	   to src ROI width as an arbitrary value. */
+	if (dst_ROI_height == 1)
+		phase_step_y = (uint32) ((src_ROI_height) << SCALER_PHASE_BITS);
+
+	/* if FIR scalar */
+	else if (scale_unit_sel_y == 0) {
+		/* Calculate the quotient ( src_ROI_height - 1 ) / ( dst_ROI_height - 1)
+		   with u3.29 precision. Quotient is rounded up to the larger
+		   29th decimal point. */
+		numerator = (src_ROI_height - 1) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_height - 1);	/* never equals to 0 because of the "( dst_ROI_height == 1 )" case */
+		phase_step_y = (uint32) mdp_do_div((numerator + denominator - 1), denominator);	/* Quotient is rounded up to the larger 29th decimal point. */
+
+	}
+
+	/* if M/N scalar */
+	else if (scale_unit_sel_y == 1) {
+		/* Calculate the quotient ( src_ROI_height ) / ( dst_ROI_height)
+		   with u3.29 precision. Quotient is rounded down to the smaller
+		   29th decimal point. */
+		numerator = (src_ROI_height) << SCALER_PHASE_BITS;
+		denominator = (dst_ROI_height);
+		phase_step_y = (uint32) mdp_do_div(numerator, denominator);
+	}
+
+	/* decide which set of FIR coefficients to use */
+	if (phase_step_x > HAL_MDP_PHASE_STEP_2P50)
+		xscale_filter_sel = 0;
+	else if (phase_step_x > HAL_MDP_PHASE_STEP_1P66)
+		xscale_filter_sel = 1;
+	else if (phase_step_x > HAL_MDP_PHASE_STEP_1P25)
+		xscale_filter_sel = 2;
+	else
+		xscale_filter_sel = 3;
+
+	if (phase_step_y > HAL_MDP_PHASE_STEP_2P50)
+		yscale_filter_sel = 0;
+	else if (phase_step_y > HAL_MDP_PHASE_STEP_1P66)
+		yscale_filter_sel = 1;
+	else if (phase_step_y > HAL_MDP_PHASE_STEP_1P25)
+		yscale_filter_sel = 2;
+	else
+		yscale_filter_sel = 3;
+
+	/* calculate phase init for the x direction */
+
+	/* if using FIR scalar */
+	if (scale_unit_sel_x == 0) {
+		if (dst_ROI_width == 1)
+			phase_init_x =
+			    (uint32) ((src_ROI_width - 1) << SCALER_PHASE_BITS);
+		else
+			phase_init_x = 0;
+
+	}
+	/* M over N scalar  */
+	else if (scale_unit_sel_x == 1)
+		phase_init_x = 0;
+
+	/* calculate phase init for the y direction
+	   if using FIR scalar */
+	if (scale_unit_sel_y == 0) {
+		if (dst_ROI_height == 1)
+			phase_init_y =
+			    (uint32) ((src_ROI_height -
+				       1) << SCALER_PHASE_BITS);
+		else
+			phase_init_y = 0;
+
+	}
+	/* M over N scalar   */
+	else if (scale_unit_sel_y == 1)
+		phase_init_y = 0;
+
+	/* write registers */
+	pval->phase_step_x = (uint32) phase_step_x;
+	pval->phase_step_y = (uint32) phase_step_y;
+	pval->phase_init_x = (uint32) phase_init_x;
+	pval->phase_init_y = (uint32) phase_init_y;
+
+	return;
+}
+
+void mdp_set_scale(MDPIBUF *iBuf,
+		   uint32 dst_roi_width,
+		   uint32 dst_roi_height,
+		   boolean inputRGB, boolean outputRGB, uint32 *pppop_reg_ptr)
+{
+	uint32 dst_roi_width_scale;
+	uint32 dst_roi_height_scale;
+	struct phase_val pval;
+	boolean use_pr;
+	uint32 ppp_scale_config = 0;
+
+	if (!inputRGB)
+		ppp_scale_config |= BIT(6);
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_ASCALE) {
+		if (iBuf->mdpImg.mdpOp & MDPOP_ROT90) {
+			dst_roi_width_scale = dst_roi_height;
+			dst_roi_height_scale = dst_roi_width;
+		} else {
+			dst_roi_width_scale = dst_roi_width;
+			dst_roi_height_scale = dst_roi_height;
+		}
+
+		if ((dst_roi_width_scale != iBuf->roi.width) ||
+		    (dst_roi_height_scale != iBuf->roi.height) ||
+			(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+			*pppop_reg_ptr |=
+			    (PPP_OP_SCALE_Y_ON | PPP_OP_SCALE_X_ON);
+
+			mdp_calc_scaleInitPhase_3p1(iBuf->roi.width,
+						    iBuf->roi.height,
+						    dst_roi_width,
+						    dst_roi_height,
+						    iBuf->mdpImg.
+						    mdpOp & MDPOP_ROT90, 1, 1,
+						    &pval);
+
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x013c,
+				 pval.phase_init_x);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0140,
+				 pval.phase_init_y);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0144,
+				 pval.phase_step_x);
+			MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0148,
+				 pval.phase_step_y);
+
+			use_pr = (inputRGB) && (outputRGB);
+
+			/* x-direction */
+			if ((dst_roi_width_scale == iBuf->roi.width) &&
+				!(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+				*pppop_reg_ptr &= ~PPP_OP_SCALE_X_ON;
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				8) {
+				if ((use_pr)
+				    && (mdp_scale_0p8_to_8p0_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p8_to_8p0_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_0p8_to_8p0_C0,
+					     mdp_scale_0p8_to_8p0_C1,
+					     mdp_scale_0p8_to_8p0_C2,
+					     mdp_scale_0p8_to_8p0_C3);
+				}
+				ppp_scale_config |= (SCALE_U1_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				6) {
+				if ((use_pr)
+				    && (mdp_scale_0p6_to_0p8_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p6_to_0p8_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_0p6_to_0p8_C0,
+					     mdp_scale_0p6_to_0p8_C1,
+					     mdp_scale_0p6_to_0p8_C2,
+					     mdp_scale_0p6_to_0p8_C3);
+				}
+				ppp_scale_config |= (SCALE_D2_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 10) / iBuf->roi.width) >
+				4) {
+				if ((use_pr)
+				    && (mdp_scale_0p4_to_0p6_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p4_to_0p6_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_0p4_to_0p6_C0,
+					     mdp_scale_0p4_to_0p6_C1,
+					     mdp_scale_0p4_to_0p6_C2,
+					     mdp_scale_0p4_to_0p6_C3);
+				}
+				ppp_scale_config |= (SCALE_D1_SET << 2);
+			} else
+			    if (((dst_roi_width_scale * 4) / iBuf->roi.width) >=
+				1) {
+				if ((use_pr)
+				    && (mdp_scale_0p2_to_0p4_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p2_to_0p4_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_0p2_to_0p4_C0,
+					     mdp_scale_0p2_to_0p4_C1,
+					     mdp_scale_0p2_to_0p4_C2,
+					     mdp_scale_0p2_to_0p4_C3);
+				}
+				ppp_scale_config |= (SCALE_D0_SET << 2);
+			} else
+				ppp_scale_config |= BIT(0);
+
+			/* y-direction */
+			if ((dst_roi_height_scale == iBuf->roi.height) &&
+				!(iBuf->mdpImg.mdpOp & MDPOP_SHARPENING)) {
+				*pppop_reg_ptr &= ~PPP_OP_SCALE_Y_ON;
+			} else if (((dst_roi_height_scale * 10) /
+					iBuf->roi.height) > 8) {
+				if ((use_pr)
+				    && (mdp_scale_0p8_to_8p0_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p8_to_8p0_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p8_to_8p0_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P8_TO_8P0_INDEX,
+					     mdp_scale_0p8_to_8p0_C0,
+					     mdp_scale_0p8_to_8p0_C1,
+					     mdp_scale_0p8_to_8p0_C2,
+					     mdp_scale_0p8_to_8p0_C3);
+				}
+				ppp_scale_config |= (SCALE_U1_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 10) /
+				 iBuf->roi.height) > 6) {
+				if ((use_pr)
+				    && (mdp_scale_0p6_to_0p8_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p6_to_0p8_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p6_to_0p8_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P6_TO_0P8_INDEX,
+					     mdp_scale_0p6_to_0p8_C0,
+					     mdp_scale_0p6_to_0p8_C1,
+					     mdp_scale_0p6_to_0p8_C2,
+					     mdp_scale_0p6_to_0p8_C3);
+				}
+				ppp_scale_config |= (SCALE_D2_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 10) /
+				 iBuf->roi.height) > 4) {
+				if ((use_pr)
+				    && (mdp_scale_0p4_to_0p6_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p4_to_0p6_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p4_to_0p6_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P4_TO_0P6_INDEX,
+					     mdp_scale_0p4_to_0p6_C0,
+					     mdp_scale_0p4_to_0p6_C1,
+					     mdp_scale_0p4_to_0p6_C2,
+					     mdp_scale_0p4_to_0p6_C3);
+				}
+				ppp_scale_config |= (SCALE_D1_SET << 4);
+			} else
+			    if (((dst_roi_height_scale * 4) /
+				 iBuf->roi.height) >= 1) {
+				if ((use_pr)
+				    && (mdp_scale_0p2_to_0p4_mode !=
+					MDP_SCALE_PR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_PR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_pixel_repeat_C0,
+					     mdp_scale_pixel_repeat_C1,
+					     mdp_scale_pixel_repeat_C2,
+					     mdp_scale_pixel_repeat_C3);
+				} else if ((!use_pr)
+					   && (mdp_scale_0p2_to_0p4_mode !=
+					       MDP_SCALE_FIR)) {
+					mdp_scale_0p2_to_0p4_mode =
+					    MDP_SCALE_FIR;
+					mdp_update_scale_table
+					    (MDP_SCALE_0P2_TO_0P4_INDEX,
+					     mdp_scale_0p2_to_0p4_C0,
+					     mdp_scale_0p2_to_0p4_C1,
+					     mdp_scale_0p2_to_0p4_C2,
+					     mdp_scale_0p2_to_0p4_C3);
+				}
+				ppp_scale_config |= (SCALE_D0_SET << 4);
+			} else
+				ppp_scale_config |= BIT(1);
+
+			if (iBuf->mdpImg.mdpOp & MDPOP_SHARPENING) {
+				ppp_scale_config |= BIT(7);
+				MDP_OUTP(MDP_BASE + 0x50020,
+						iBuf->mdpImg.sp_value);
+			}
+
+			MDP_OUTP(MDP_BASE + 0x10230, ppp_scale_config);
+		} else {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ASCALE);
+		}
+	}
+}
+
+void mdp_adjust_start_addr(uint8 **src0,
+			   uint8 **src1,
+			   int v_slice,
+			   int h_slice,
+			   int x,
+			   int y,
+			   uint32 width,
+			   uint32 height, int bpp, MDPIBUF *iBuf, int layer)
+{
+	switch (layer) {
+	case 0:
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0200, (y << 16) | (x));
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0208,
+			 (height << 16) | (width));
+		break;
+
+	case 1:
+		/* MDP 3.1 HW bug workaround */
+		if (iBuf->ibuf_type == MDP_YCRYCB_H2V1) {
+			*src0 += (x + y * width) * bpp;
+			x = y = 0;
+			width = iBuf->roi.dst_width;
+			height = iBuf->roi.dst_height;
+		}
+
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x0204, (y << 16) | (x));
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x020c,
+			 (height << 16) | (width));
+		break;
+
+	case 2:
+		MDP_OUTP(MDP_CMD_DEBUG_ACCESS_BASE + 0x019c, (y << 16) | (x));
+		break;
+	}
+}
+
+void mdp_set_blend_attr(MDPIBUF *iBuf,
+			uint32 *alpha,
+			uint32 *tpVal,
+			uint32 perPixelAlpha, uint32 *pppop_reg_ptr)
+{
+	int bg_alpha;
+
+	*alpha = iBuf->mdpImg.alpha;
+	*tpVal = iBuf->mdpImg.tpVal;
+
+	if (iBuf->mdpImg.mdpOp & MDPOP_FG_PM_ALPHA) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_CONSTANT_ALPHA;
+
+		bg_alpha = PPP_BLEND_BG_USE_ALPHA_SEL |
+				PPP_BLEND_BG_ALPHA_REVERSE;
+
+		if (perPixelAlpha)
+			bg_alpha |= PPP_BLEND_BG_SRCPIXEL_ALPHA;
+		else
+			bg_alpha |= PPP_BLEND_BG_CONSTANT_ALPHA;
+
+		outpdw(MDP_BASE + 0x70010, bg_alpha);
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+			*pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+	} else if (perPixelAlpha) {
+		*pppop_reg_ptr |= PPP_OP_ROT_ON |
+		    PPP_OP_BLEND_ON | PPP_OP_BLEND_SRCPIXEL_ALPHA;
+	} else {
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    && (iBuf->mdpImg.alpha == 0xff)) {
+			iBuf->mdpImg.mdpOp &= ~(MDPOP_ALPHAB);
+		}
+
+		if ((iBuf->mdpImg.mdpOp & MDPOP_ALPHAB)
+		    || (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)) {
+			*pppop_reg_ptr |=
+			    PPP_OP_ROT_ON | PPP_OP_BLEND_ON |
+			    PPP_OP_BLEND_CONSTANT_ALPHA |
+			    PPP_OP_BLEND_ALPHA_BLEND_NORMAL;
+		}
+
+		if (iBuf->mdpImg.mdpOp & MDPOP_TRANSP)
+			*pppop_reg_ptr |= PPP_BLEND_CALPHA_TRNASP;
+	}
+}
diff --git a/drivers/staging/msm/mdp_vsync.c b/drivers/staging/msm/mdp_vsync.c
new file mode 100644
index 0000000..bbd4560
--- /dev/null
+++ b/drivers/staging/msm/mdp_vsync.c
@@ -0,0 +1,389 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <mach/gpio.h>
+
+#include "mdp.h"
+#include "msm_fb.h"
+#include "mddihost.h"
+
+#ifdef CONFIG_FB_MSM_MDP40
+#define MDP_SYNC_CFG_0		0x100
+#define MDP_SYNC_STATUS_0	0x10c
+#define MDP_PRIM_VSYNC_OUT_CTRL	0x118
+#define MDP_PRIM_VSYNC_INIT_VAL	0x128
+#else
+#define MDP_SYNC_CFG_0		0x300
+#define MDP_SYNC_STATUS_0	0x30c
+#define MDP_PRIM_VSYNC_OUT_CTRL	0x318
+#define MDP_PRIM_VSYNC_INIT_VAL	0x328
+#endif
+
+extern mddi_lcd_type mddi_lcd_idx;
+extern spinlock_t mdp_spin_lock;
+extern struct workqueue_struct *mdp_vsync_wq;
+extern int lcdc_mode;
+extern int vsync_mode;
+
+#ifdef MDP_HW_VSYNC
+int vsync_above_th = 4;
+int vsync_start_th = 1;
+int vsync_load_cnt;
+
+struct clk *mdp_vsync_clk;
+
+void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd)
+{
+	if (mfd->use_mdp_vsync)
+		clk_enable(mdp_vsync_clk);
+}
+
+void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd)
+{
+	if (mfd->use_mdp_vsync)
+		clk_disable(mdp_vsync_clk);
+}
+#endif
+
+static void mdp_set_vsync(unsigned long data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+	struct msm_fb_panel_data *pdata = NULL;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_vsync_notifier == NULL))
+		return;
+
+	init_timer(&mfd->vsync_resync_timer);
+	mfd->vsync_resync_timer.function = mdp_set_vsync;
+	mfd->vsync_resync_timer.data = data;
+	mfd->vsync_resync_timer.expires =
+	    jiffies + mfd->panel_info.lcd.vsync_notifier_period;
+	add_timer(&mfd->vsync_resync_timer);
+
+	if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on)
+	    && (!mfd->vsync_handler_pending)) {
+		mfd->vsync_handler_pending = TRUE;
+		if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) {
+			MSM_FB_INFO
+			    ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n");
+		}
+	} else {
+		MSM_FB_DEBUG
+		    ("mdp_set_vsync failed!  EN:%d  PWR:%d  PENDING:%d\n",
+		     mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on,
+		     mfd->vsync_handler_pending);
+	}
+}
+
+static void mdp_vsync_handler(void *data)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
+
+	if (mfd->use_mdp_vsync) {
+#ifdef MDP_HW_VSYNC
+		if (mfd->panel_power_on)
+			MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt);
+
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
+#endif
+	} else {
+		mfd->last_vsync_timetick = ktime_get_real();
+	}
+
+	mfd->vsync_handler_pending = FALSE;
+}
+
+irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data)
+{
+	/*
+	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+	 * but getting inaccurate timing in mdp_vsync_handler()
+	 * disable_irq(MDP_HW_VSYNC_IRQ);
+	 */
+	mdp_vsync_handler(data);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef MDP_HW_VSYNC
+static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt)
+{
+	unsigned long cfg;
+
+	cfg = mfd->total_lcd_lines - 1;
+	cfg <<= MDP_SYNCFG_HGT_LOC;
+	if (mfd->panel_info.lcd.hw_vsync_mode)
+		cfg |= MDP_SYNCFG_VSYNC_EXT_EN;
+	cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt);
+
+	MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg);
+}
+#endif
+
+void mdp_config_vsync(struct msm_fb_data_type *mfd)
+{
+
+	/* vsync on primary lcd only for now */
+	if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
+	    || (!vsync_mode)) {
+		goto err_handle;
+	}
+
+	if (mfd->panel_info.lcd.vsync_enable) {
+		mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
+		    mfd->panel_info.lcd.v_front_porch +
+		    mfd->panel_info.lcd.v_pulse_width;
+		mfd->total_lcd_lines =
+		    mfd->panel_info.yres + mfd->total_porch_lines;
+		mfd->lcd_ref_usec_time =
+		    100000000 / mfd->panel_info.lcd.refx100;
+		mfd->vsync_handler_pending = FALSE;
+		mfd->last_vsync_timetick.tv.sec = 0;
+		mfd->last_vsync_timetick.tv.nsec = 0;
+
+#ifdef MDP_HW_VSYNC
+		if (mdp_vsync_clk == NULL)
+			mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");
+
+		if (IS_ERR(mdp_vsync_clk)) {
+			printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
+			mfd->use_mdp_vsync = 0;
+		} else
+			mfd->use_mdp_vsync = 1;
+
+		if (mfd->use_mdp_vsync) {
+			uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
+			uint32 mdp_vsync_clk_speed_hz;
+
+			mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);
+
+			if (mdp_vsync_clk_speed_hz == 0) {
+				mfd->use_mdp_vsync = 0;
+			} else {
+				/*
+				 * Do this calculation in 2 steps for
+				 * rounding uint32 properly.
+				 */
+				vsync_cnt_cfg_dem =
+				    (mfd->panel_info.lcd.refx100 *
+				     mfd->total_lcd_lines) / 100;
+				vsync_cnt_cfg =
+				    (mdp_vsync_clk_speed_hz) /
+				    vsync_cnt_cfg_dem;
+
+				/* MDP cmd block enable */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+					      FALSE);
+				mdp_hw_vsync_clk_enable(mfd);
+
+				mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);
+
+				/*
+				 * load the last line + 1 to be in the
+				 * safety zone
+				 */
+				vsync_load_cnt = mfd->panel_info.yres;
+
+				/* line counter init value at the next pulse */
+				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
+							vsync_load_cnt);
+
+				/*
+				 * external vsync source pulse width and
+				 * polarity flip
+				 */
+				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
+							BIT(30) | BIT(0));
+
+
+				/* threshold */
+				MDP_OUTP(MDP_BASE + 0x200,
+					 (vsync_above_th << 16) |
+					 (vsync_start_th));
+
+				mdp_hw_vsync_clk_disable(mfd);
+				/* MDP cmd block disable */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK,
+					      MDP_BLOCK_POWER_OFF, FALSE);
+			}
+		}
+#else
+		mfd->use_mdp_vsync = 0;
+		hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL);
+		mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
+		mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
+#endif
+
+		mfd->channel_irq = 0;
+		if (mfd->panel_info.lcd.hw_vsync_mode) {
+			u32 vsync_gpio = mfd->vsync_gpio;
+			u32 ret;
+
+			if (vsync_gpio == -1) {
+				MSM_FB_INFO("vsync_gpio not defined!\n");
+				goto err_handle;
+			}
+
+			ret = gpio_tlmm_config(GPIO_CFG
+					(vsync_gpio,
+					(mfd->use_mdp_vsync) ? 1 : 0,
+					GPIO_INPUT,
+					GPIO_PULL_DOWN,
+					GPIO_2MA),
+					GPIO_ENABLE);
+			if (ret)
+				goto err_handle;
+
+			if (!mfd->use_mdp_vsync) {
+				mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
+				if (request_irq
+				    (mfd->channel_irq,
+				     &mdp_hw_vsync_handler_proxy,
+				     IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
+				     (void *)mfd)) {
+					MSM_FB_INFO
+					("irq=%d failed! vsync_gpio=%d\n",
+						mfd->channel_irq,
+						vsync_gpio);
+					goto err_handle;
+				}
+			}
+		}
+
+		mdp_set_vsync((unsigned long)mfd);
+	}
+
+	return;
+
+err_handle:
+	if (mfd->vsync_width_boundary)
+		vfree(mfd->vsync_width_boundary);
+	mfd->panel_info.lcd.vsync_enable = FALSE;
+	printk(KERN_ERR "%s: failed!\n", __func__);
+}
+
+void mdp_vsync_resync_workqueue_handler(struct work_struct *work)
+{
+	struct msm_fb_data_type *mfd = NULL;
+	int vsync_fnc_enabled = FALSE;
+	struct msm_fb_panel_data *pdata = NULL;
+
+	mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker);
+
+	if (mfd) {
+		if (mfd->panel_power_on) {
+			pdata =
+			    (struct msm_fb_panel_data *)mfd->pdev->dev.
+			    platform_data;
+
+			/*
+			 * we need to turn on MDP power if it uses MDP vsync
+			 * HW block in SW mode
+			 */
+			if ((!mfd->panel_info.lcd.hw_vsync_mode) &&
+			    (mfd->use_mdp_vsync) &&
+			    (pdata) && (pdata->set_vsync_notifier != NULL)) {
+				/*
+				 * enable pwr here since we can't enable it in
+				 * vsync callback in isr mode
+				 */
+				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
+					      FALSE);
+			}
+
+			if (pdata->set_vsync_notifier != NULL) {
+				vsync_fnc_enabled = TRUE;
+				pdata->set_vsync_notifier(mdp_vsync_handler,
+							  (void *)mfd);
+			}
+		}
+	}
+
+	if ((mfd) && (!vsync_fnc_enabled))
+		mfd->vsync_handler_pending = FALSE;
+}
+
+boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data)
+{
+	/*
+	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
+	 * but getting inaccurate timing in mdp_vsync_handler()
+	 * enable_irq(MDP_HW_VSYNC_IRQ);
+	 */
+
+	return TRUE;
+}
+
+uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd)
+{
+	uint32 elapsed_usec_time;
+	uint32 lcd_line;
+	ktime_t last_vsync_timetick_local;
+	ktime_t curr_time;
+	unsigned long flag;
+
+	if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode))
+		return 0;
+
+	spin_lock_irqsave(&mdp_spin_lock, flag);
+	last_vsync_timetick_local = mfd->last_vsync_timetick;
+	spin_unlock_irqrestore(&mdp_spin_lock, flag);
+
+	curr_time = ktime_get_real();
+	elapsed_usec_time =
+	    ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) +
+	    ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000);
+
+	elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time;
+
+	/* lcd line calculation referencing to line counter = 0 */
+	lcd_line =
+	    (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time;
+
+	/* lcd line adjusment referencing to the actual line counter at vsync */
+	lcd_line =
+	    (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch +
+	     lcd_line) % (mfd->total_lcd_lines + 1);
+
+	if (lcd_line > mfd->total_lcd_lines) {
+		MSM_FB_INFO
+		    ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n");
+	}
+
+	return lcd_line;
+}
diff --git a/drivers/staging/msm/memory.c b/drivers/staging/msm/memory.c
new file mode 100644
index 0000000..cc80fdf
--- /dev/null
+++ b/drivers/staging/msm/memory.c
@@ -0,0 +1,214 @@
+/* arch/arm/mach-msm/memory.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/mm_types.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/mach/map.h>
+#include "memory_ll.h"
+#include <asm/cacheflush.h>
+#if defined(CONFIG_MSM_NPA_REMOTE)
+#include "npa_remote.h"
+#include <linux/completion.h>
+#include <linux/err.h>
+#endif
+
+int arch_io_remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
+			    unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	unsigned long pfn_addr = pfn << PAGE_SHIFT;
+/*
+	if ((pfn_addr >= 0x88000000) && (pfn_addr < 0xD0000000)) {
+		prot = pgprot_device(prot);
+		printk("remapping device %lx\n", prot);
+	}
+*/
+	panic("Memory remap PFN stuff not done\n");
+	return remap_pfn_range(vma, addr, pfn, size, prot);
+}
+
+void *zero_page_strongly_ordered;
+
+static void map_zero_page_strongly_ordered(void)
+{
+	if (zero_page_strongly_ordered)
+		return;
+/*
+	zero_page_strongly_ordered =
+		ioremap_strongly_ordered(page_to_pfn(empty_zero_page)
+		<< PAGE_SHIFT, PAGE_SIZE);
+*/
+	panic("Strongly ordered memory functions not implemented\n");
+}
+
+void write_to_strongly_ordered_memory(void)
+{
+	map_zero_page_strongly_ordered();
+	*(int *)zero_page_strongly_ordered = 0;
+}
+EXPORT_SYMBOL(write_to_strongly_ordered_memory);
+
+void flush_axi_bus_buffer(void)
+{
+	__asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory");
+	write_to_strongly_ordered_memory();
+}
+
+#define CACHE_LINE_SIZE 32
+
+/* These cache related routines make the assumption that the associated
+ * physical memory is contiguous. They will operate on all (L1
+ * and L2 if present) caches.
+ */
+void clean_and_invalidate_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c14, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_flush_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void clean_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c10, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_clean_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void invalidate_caches(unsigned long vstart,
+	unsigned long length, unsigned long pstart)
+{
+	unsigned long vaddr;
+
+	for (vaddr = vstart; vaddr < vstart + length; vaddr += CACHE_LINE_SIZE)
+		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (vaddr));
+#ifdef CONFIG_OUTER_CACHE
+	outer_inv_range(pstart, pstart + length);
+#endif
+	asm ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+	flush_axi_bus_buffer();
+}
+
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment)
+{
+	void *unused_addr = NULL;
+	unsigned long addr, tmp_size, unused_size;
+
+	/* Allocate maximum size needed, see where it ends up.
+	 * Then free it -- in this path there are no other allocators
+	 * so we can depend on getting the same address back
+	 * when we allocate a smaller piece that is aligned
+	 * at the end (if necessary) and the piece we really want,
+	 * then free the unused first piece.
+	 */
+
+	tmp_size = size + alignment - PAGE_SIZE;
+	addr = (unsigned long)alloc_bootmem(tmp_size);
+	free_bootmem(__pa(addr), tmp_size);
+
+	unused_size = alignment - (addr % alignment);
+	if (unused_size)
+		unused_addr = alloc_bootmem(unused_size);
+
+	addr = (unsigned long)alloc_bootmem(size);
+	if (unused_size)
+		free_bootmem(__pa(unused_addr), unused_size);
+
+	return (void *)addr;
+}
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+struct npa_client *npa_memory_client;
+#endif
+
+static int change_memory_power_state(unsigned long start_pfn,
+	unsigned long nr_pages, int state)
+{
+#if defined(CONFIG_MSM_NPA_REMOTE)
+	static atomic_t node_created_flag = ATOMIC_INIT(1);
+#else
+	unsigned long start;
+	unsigned long size;
+	unsigned long virtual;
+#endif
+	int rc = 0;
+
+#if defined(CONFIG_MSM_NPA_REMOTE)
+	if (atomic_dec_and_test(&node_created_flag)) {
+		/* Create NPA 'required' client. */
+		npa_memory_client = npa_create_sync_client(NPA_MEMORY_NODE_NAME,
+			"memory node", NPA_CLIENT_REQUIRED);
+		if (IS_ERR(npa_memory_client)) {
+			rc = PTR_ERR(npa_memory_client);
+			return rc;
+		}
+	}
+
+	rc = npa_issue_required_request(npa_memory_client, state);
+#else
+	if (state == MEMORY_DEEP_POWERDOWN) {
+		/* simulate turning off memory by writing bit pattern into it */
+		start = start_pfn << PAGE_SHIFT;
+		size = nr_pages << PAGE_SHIFT;
+		virtual = __phys_to_virt(start);
+		memset((void *)virtual, 0x27, size);
+	}
+#endif
+	return rc;
+}
+
+int platform_physical_remove_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages,
+		MEMORY_DEEP_POWERDOWN);
+}
+
+int platform_physical_add_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages, MEMORY_ACTIVE);
+}
+
+int platform_physical_low_power_pages(unsigned long start_pfn,
+	unsigned long nr_pages)
+{
+	return change_memory_power_state(start_pfn, nr_pages,
+		MEMORY_SELF_REFRESH);
+}
diff --git a/drivers/staging/msm/memory_ll.h b/drivers/staging/msm/memory_ll.h
new file mode 100644
index 0000000..18a239a
--- /dev/null
+++ b/drivers/staging/msm/memory_ll.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_LL_H
+#define __ASM_ARCH_MEMORY_LL_H
+
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 25
+
+#define HAS_ARCH_IO_REMAP_PFN_RANGE
+
+#ifndef __ASSEMBLY__
+void *alloc_bootmem_aligned(unsigned long size, unsigned long alignment);
+void clean_and_invalidate_caches(unsigned long, unsigned long, unsigned long);
+void clean_caches(unsigned long, unsigned long, unsigned long);
+void invalidate_caches(unsigned long, unsigned long, unsigned long);
+int platform_physical_remove_pages(unsigned long, unsigned long);
+int platform_physical_add_pages(unsigned long, unsigned long);
+int platform_physical_low_power_pages(unsigned long, unsigned long);
+
+#ifdef CONFIG_ARCH_MSM_ARM11
+void write_to_strongly_ordered_memory(void);
+
+#include <asm/mach-types.h>
+
+#define arch_barrier_extra() do \
+	{ if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())  \
+		write_to_strongly_ordered_memory(); \
+	} while (0)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void l2x0_cache_sync(void);
+#define finish_arch_switch(prev)     do { l2x0_cache_sync(); } while (0)
+#endif
+
+#endif
+
+#ifdef CONFIG_ARCH_MSM_SCORPION
+#define arch_has_speculative_dfetch()	1
+#endif
+
+#endif
+
+/* these correspond to values known by the modem */
+#define MEMORY_DEEP_POWERDOWN	0
+#define MEMORY_SELF_REFRESH	1
+#define MEMORY_ACTIVE		2
+
+#define NPA_MEMORY_NODE_NAME	"/mem/ebi1/cs1"
diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c
new file mode 100644
index 0000000..af5620e
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.c
@@ -0,0 +1,2354 @@
+/*
+ *
+ * Core MSM framebuffer driver.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <mach/board.h>
+#include <linux/uaccess.h>
+
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+#include <linux/leds.h>
+#include <asm/dma-mapping.h>
+
+
+#define MSM_FB_C
+#include "msm_fb.h"
+#include "mddihosti.h"
+#include "tvenc.h"
+#include "mdp.h"
+#include "mdp4.h"
+
+#ifdef CONFIG_FB_MSM_LOGO
+#define INIT_IMAGE_FILE "/logo.rle"
+extern int load_565rle_image(char *filename);
+#endif
+
+
+#define pgprot_noncached(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+#define pgprot_writecombine(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_device(prot) \
+       __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_DEV_NONSHARED)
+#define pgprot_writethroughcache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITETHROUGH)
+#define pgprot_writebackcache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEBACK)
+#define pgprot_writebackwacache(prot) \
+       __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_WRITEALLOC)
+
+static unsigned char *fbram;
+static unsigned char *fbram_phys;
+static int fbram_size;
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+int vsync_mode = 1;
+
+#define MAX_FBI_LIST 32
+static struct fb_info *fbi_list[MAX_FBI_LIST];
+static int fbi_list_index;
+
+static struct msm_fb_data_type *mfd_list[MAX_FBI_LIST];
+static int mfd_list_index;
+
+static u32 msm_fb_pseudo_palette[16] = {
+	0x00000000, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
+};
+
+u32 msm_fb_debug_enabled;
+/* Setting msm_fb_msg_level to 8 prints out ALL messages */
+u32 msm_fb_msg_level = 7;
+
+/* Setting mddi_msg_level to 8 prints out ALL messages */
+u32 mddi_msg_level = 5;
+
+extern int32 mdp_block_power_cnt[MDP_MAX_BLOCK];
+extern unsigned long mdp_timer_duration;
+
+static int msm_fb_register(struct msm_fb_data_type *mfd);
+static int msm_fb_open(struct fb_info *info, int user);
+static int msm_fb_release(struct fb_info *info, int user);
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info);
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd);
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd);
+static int msm_fb_check_var(struct fb_var_screeninfo *var,
+			    struct fb_info *info);
+static int msm_fb_set_par(struct fb_info *info);
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+			    boolean op_enable);
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd);
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg);
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma);
+
+#ifdef MSM_FB_ENABLE_DBGFS
+
+#define MSM_FB_MAX_DBGFS 1024
+#define MAX_BACKLIGHT_BRIGHTNESS 255
+
+int msm_fb_debugfs_file_index;
+struct dentry *msm_fb_debugfs_root;
+struct dentry *msm_fb_debugfs_file[MSM_FB_MAX_DBGFS];
+
+struct dentry *msm_fb_get_debugfs_root(void)
+{
+	if (msm_fb_debugfs_root == NULL)
+		msm_fb_debugfs_root = debugfs_create_dir("msm_fb", NULL);
+
+	return msm_fb_debugfs_root;
+}
+
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+				u32 *var)
+{
+	if (msm_fb_debugfs_file_index >= MSM_FB_MAX_DBGFS)
+		return;
+
+	msm_fb_debugfs_file[msm_fb_debugfs_file_index++] =
+	    debugfs_create_u32(name, S_IRUGO | S_IWUSR, root, var);
+}
+#endif
+
+int msm_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->cursor_update)
+		return -ENODEV;
+
+	return mfd->cursor_update(info, cursor);
+}
+
+static int msm_fb_resource_initialized;
+
+#ifndef CONFIG_FB_BACKLIGHT
+static int lcd_backlight_registered;
+
+static void msm_fb_set_bl_brightness(struct led_classdev *led_cdev,
+					enum led_brightness value)
+{
+	struct msm_fb_data_type *mfd = dev_get_drvdata(led_cdev->dev->parent);
+	int bl_lvl;
+
+	if (value > MAX_BACKLIGHT_BRIGHTNESS)
+		value = MAX_BACKLIGHT_BRIGHTNESS;
+
+	/* This maps android backlight level 0 to 255 into
+	   driver backlight level 0 to bl_max with rounding */
+	bl_lvl = (2 * value * mfd->panel_info.bl_max + MAX_BACKLIGHT_BRIGHTNESS)
+		/(2 * MAX_BACKLIGHT_BRIGHTNESS);
+
+	if (!bl_lvl && value)
+		bl_lvl = 1;
+
+	msm_fb_set_backlight(mfd, bl_lvl, 1);
+}
+
+static struct led_classdev backlight_led = {
+	.name		= "lcd-backlight",
+	.brightness	= MAX_BACKLIGHT_BRIGHTNESS,
+	.brightness_set	= msm_fb_set_bl_brightness,
+};
+#endif
+
+static struct msm_fb_platform_data *msm_fb_pdata;
+
+int msm_fb_detect_client(const char *name)
+{
+	int ret = -EPERM;
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+	u32 id;
+#endif
+
+	if (msm_fb_pdata && msm_fb_pdata->detect_client) {
+		ret = msm_fb_pdata->detect_client(name);
+
+		/* if it's non mddi panel, we need to pre-scan
+		   mddi client to see if we can disable mddi host */
+
+#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
+		if (!ret && msm_fb_pdata->mddi_prescan)
+			id = mddi_get_client_id();
+#endif
+	}
+
+	return ret;
+}
+
+static int msm_fb_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	int rc;
+
+	MSM_FB_DEBUG("msm_fb_probe\n");
+
+	if ((pdev->id == 0) && (pdev->num_resources > 0)) {
+		msm_fb_pdata = pdev->dev.platform_data;
+		fbram_size =
+			pdev->resource[0].end - pdev->resource[0].start + 1;
+		fbram_phys = (char *)pdev->resource[0].start;
+		fbram = ioremap((unsigned long)fbram_phys, fbram_size);
+
+		if (!fbram) {
+			printk(KERN_ERR "fbram ioremap failed!\n");
+			return -ENOMEM;
+		}
+		MSM_FB_INFO("msm_fb_probe:  phy_Addr = 0x%x virt = 0x%x\n",
+			     (int)fbram_phys, (int)fbram);
+
+		msm_fb_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!msm_fb_resource_initialized)
+		return -EPERM;
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	mfd->panel_info.frame_count = 0;
+	mfd->bl_level = mfd->panel_info.bl_max;
+
+	if (mfd->panel_info.type == LCDC_PANEL)
+		mfd->allow_set_offset =
+		msm_fb_pdata->allow_set_offset != NULL ?
+		msm_fb_pdata->allow_set_offset() : 0;
+	else
+		mfd->allow_set_offset = 0;
+
+	rc = msm_fb_register(mfd);
+	if (rc)
+		return rc;
+
+#ifdef CONFIG_FB_BACKLIGHT
+	msm_fb_config_backlight(mfd);
+#else
+	/* android supports only one lcd-backlight/lcd for now */
+	if (!lcd_backlight_registered) {
+		if (led_classdev_register(&pdev->dev, &backlight_led))
+			printk(KERN_ERR "led_classdev_register failed\n");
+		else
+			lcd_backlight_registered = 1;
+	}
+#endif
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+}
+
+static int msm_fb_remove(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+
+	MSM_FB_DEBUG("msm_fb_remove\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (msm_fb_suspend_sub(mfd))
+		printk(KERN_ERR "msm_fb_remove: can't stop the device %d\n", mfd->index);
+
+	if (mfd->channel_irq != 0)
+		free_irq(mfd->channel_irq, (void *)mfd);
+
+	if (mfd->vsync_width_boundary)
+		vfree(mfd->vsync_width_boundary);
+
+	if (mfd->vsync_resync_timer.function)
+		del_timer(&mfd->vsync_resync_timer);
+
+	if (mfd->refresh_timer.function)
+		del_timer(&mfd->refresh_timer);
+
+	if (mfd->dma_hrtimer.function)
+		hrtimer_cancel(&mfd->dma_hrtimer);
+
+	/* remove /dev/fb* */
+	unregister_framebuffer(mfd->fbi);
+
+#ifdef CONFIG_FB_BACKLIGHT
+	/* remove /sys/class/backlight */
+	backlight_device_unregister(mfd->fbi->bl_dev);
+#else
+	if (lcd_backlight_registered) {
+		lcd_backlight_registered = 0;
+		led_classdev_unregister(&backlight_led);
+	}
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	if (mfd->sub_dir)
+		debugfs_remove(mfd->sub_dir);
+#endif
+
+	return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct msm_fb_data_type *mfd;
+	int ret = 0;
+
+	MSM_FB_DEBUG("msm_fb_suspend\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	acquire_console_sem();
+	fb_set_suspend(mfd->fbi, 1);
+
+	ret = msm_fb_suspend_sub(mfd);
+	if (ret != 0) {
+		printk(KERN_ERR "msm_fb: failed to suspend! %d\n", ret);
+		fb_set_suspend(mfd->fbi, 0);
+	} else {
+		pdev->dev.power.power_state = state;
+	}
+
+	release_console_sem();
+	return ret;
+}
+#else
+#define msm_fb_suspend NULL
+#endif
+
+static int msm_fb_suspend_sub(struct msm_fb_data_type *mfd)
+{
+	int ret = 0;
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	/*
+	 * suspend this channel
+	 */
+	mfd->suspend.sw_refreshing_enable = mfd->sw_refreshing_enable;
+	mfd->suspend.op_enable = mfd->op_enable;
+	mfd->suspend.panel_power_on = mfd->panel_power_on;
+
+	if (mfd->op_enable) {
+		ret =
+		     msm_fb_blank_sub(FB_BLANK_POWERDOWN, mfd->fbi,
+				      mfd->suspend.op_enable);
+		if (ret) {
+			MSM_FB_INFO
+			    ("msm_fb_suspend: can't turn off display!\n");
+			return ret;
+		}
+		mfd->op_enable = FALSE;
+	}
+	/*
+	 * try to power down
+	 */
+	mdp_pipe_ctrl(MDP_MASTER_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+
+	/*
+	 * detach display channel irq if there's any
+	 * or wait until vsync-resync completes
+	 */
+	if ((mfd->dest == DISPLAY_LCD)) {
+		if (mfd->panel_info.lcd.vsync_enable) {
+			if (mfd->panel_info.lcd.hw_vsync_mode) {
+				if (mfd->channel_irq != 0)
+					disable_irq(mfd->channel_irq);
+			} else {
+				volatile boolean vh_pending;
+				do {
+					vh_pending = mfd->vsync_handler_pending;
+				} while (vh_pending);
+			}
+		}
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_PM) && !defined(CONFIG_HAS_EARLYSUSPEND)
+static int msm_fb_resume(struct platform_device *pdev)
+{
+	/* This resume function is called when interrupt is enabled.
+	 */
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	MSM_FB_DEBUG("msm_fb_resume\n");
+
+	mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	acquire_console_sem();
+	ret = msm_fb_resume_sub(mfd);
+	pdev->dev.power.power_state = PMSG_ON;
+	fb_set_suspend(mfd->fbi, 1);
+	release_console_sem();
+
+	return ret;
+}
+#else
+#define msm_fb_resume NULL
+#endif
+
+static int msm_fb_resume_sub(struct msm_fb_data_type *mfd)
+{
+	int ret = 0;
+
+	if ((!mfd) || (mfd->key != MFD_KEY))
+		return 0;
+
+	/* attach display channel irq if there's any */
+	if (mfd->channel_irq != 0)
+		enable_irq(mfd->channel_irq);
+
+	/* resume state var recover */
+	mfd->sw_refreshing_enable = mfd->suspend.sw_refreshing_enable;
+	mfd->op_enable = mfd->suspend.op_enable;
+
+	if (mfd->suspend.panel_power_on) {
+		ret =
+		     msm_fb_blank_sub(FB_BLANK_UNBLANK, mfd->fbi,
+				      mfd->op_enable);
+		if (ret)
+			MSM_FB_INFO("msm_fb_resume: can't turn on display!\n");
+	}
+
+	return ret;
+}
+
+static struct platform_driver msm_fb_driver = {
+	.probe = msm_fb_probe,
+	.remove = msm_fb_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+	.suspend = msm_fb_suspend,
+	.resume = msm_fb_resume,
+#endif
+	.shutdown = NULL,
+	.driver = {
+		   /* Driver name must match the device name added in platform.c. */
+		   .name = "msm_fb",
+		   },
+};
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void msmfb_early_suspend(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+						    early_suspend);
+	msm_fb_suspend_sub(mfd);
+}
+
+static void msmfb_early_resume(struct early_suspend *h)
+{
+	struct msm_fb_data_type *mfd = container_of(h, struct msm_fb_data_type,
+						    early_suspend);
+	msm_fb_resume_sub(mfd);
+}
+#endif
+
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl, u32 save)
+{
+	struct msm_fb_panel_data *pdata;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_backlight)) {
+		down(&mfd->sem);
+		if ((bkl_lvl != mfd->bl_level) || (!save)) {
+			u32 old_lvl;
+
+			old_lvl = mfd->bl_level;
+			mfd->bl_level = bkl_lvl;
+			pdata->set_backlight(mfd);
+
+			if (!save)
+				mfd->bl_level = old_lvl;
+		}
+		up(&mfd->sem);
+	}
+}
+
+static int msm_fb_blank_sub(int blank_mode, struct fb_info *info,
+			    boolean op_enable)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct msm_fb_panel_data *pdata = NULL;
+	int ret = 0;
+
+	if (!op_enable)
+		return -EPERM;
+
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+	if ((!pdata) || (!pdata->on) || (!pdata->off)) {
+		printk(KERN_ERR "msm_fb_blank_sub: no panel operation detected!\n");
+		return -ENODEV;
+	}
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		if (!mfd->panel_power_on) {
+			mdelay(100);
+			ret = pdata->on(mfd->pdev);
+			if (ret == 0) {
+				mfd->panel_power_on = TRUE;
+
+				msm_fb_set_backlight(mfd,
+						     mfd->bl_level, 0);
+
+/* ToDo: possible conflict with android which doesn't expect sw refresher */
+/*
+	  if (!mfd->hw_refresh)
+	  {
+	    if ((ret = msm_fb_resume_sw_refresher(mfd)) != 0)
+	    {
+	      MSM_FB_INFO("msm_fb_blank_sub: msm_fb_resume_sw_refresher failed = %d!\n",ret);
+	    }
+	  }
+*/
+			}
+		}
+		break;
+
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_POWERDOWN:
+	default:
+		if (mfd->panel_power_on) {
+			int curr_pwr_state;
+
+			mfd->op_enable = FALSE;
+			curr_pwr_state = mfd->panel_power_on;
+			mfd->panel_power_on = FALSE;
+
+			mdelay(100);
+			ret = pdata->off(mfd->pdev);
+			if (ret)
+				mfd->panel_power_on = curr_pwr_state;
+
+			msm_fb_set_backlight(mfd, 0, 0);
+			mfd->op_enable = TRUE;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static void msm_fb_fillrect(struct fb_info *info,
+			    const struct fb_fillrect *rect)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_fillrect(info, rect);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (rect->dy << 16) | (rect->dx);
+		var.reserved[2] = ((rect->dy + rect->height) << 16) |
+		    (rect->dx + rect->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static void msm_fb_copyarea(struct fb_info *info,
+			    const struct fb_copyarea *area)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_copyarea(info, area);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (area->dy << 16) | (area->dx);
+		var.reserved[2] = ((area->dy + area->height) << 16) |
+		    (area->dx + area->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static void msm_fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	cfb_imageblit(info, image);
+	if (!mfd->hw_refresh && (info->var.yoffset == 0) &&
+		!mfd->sw_currently_refreshing) {
+		struct fb_var_screeninfo var;
+
+		var = info->var;
+		var.reserved[0] = 0x54445055;
+		var.reserved[1] = (image->dy << 16) | (image->dx);
+		var.reserved[2] = ((image->dy + image->height) << 16) |
+		    (image->dx + image->width);
+
+		msm_fb_pan_display(&var, info);
+	}
+}
+
+static int msm_fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	return msm_fb_blank_sub(blank_mode, info, mfd->op_enable);
+}
+
+static int msm_fb_set_lut(struct fb_cmap *cmap, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->lut_update)
+		return -ENODEV;
+
+	mfd->lut_update(info, cmap);
+	return 0;
+}
+
+/*
+ * Custom Framebuffer mmap() function for MSM driver.
+ * Differs from standard mmap() function by allowing for customized
+ * page-protection.
+ */
+static int msm_fb_mmap(struct fb_info *info, struct vm_area_struct * vma)
+{
+	/* Get frame buffer memory range. */
+	unsigned long start = info->fix.smem_start;
+	u32 len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
+	unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	if (off >= len) {
+		/* memory mapped io */
+		off -= len;
+		if (info->var.accel_flags) {
+			mutex_unlock(&info->lock);
+			return -EINVAL;
+		}
+		start = info->fix.mmio_start;
+		len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
+	}
+
+	/* Set VM flags. */
+	start &= PAGE_MASK;
+	if ((vma->vm_end - vma->vm_start + off) > len)
+		return -EINVAL;
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	/* This is an IO map - tell maydump to skip this VMA */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+
+	/* Set VM page protection */
+	if (mfd->mdp_fb_page_protection == MDP_FB_PAGE_PROTECTION_WRITECOMBINE)
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE)
+		vma->vm_page_prot = pgprot_writethroughcache(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE)
+		vma->vm_page_prot = pgprot_writebackcache(vma->vm_page_prot);
+	else if (mfd->mdp_fb_page_protection ==
+			MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE)
+		vma->vm_page_prot = pgprot_writebackwacache(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	/* Remap the frame buffer I/O range */
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+				vma->vm_end - vma->vm_start,
+				vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static struct fb_ops msm_fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_open = msm_fb_open,
+	.fb_release = msm_fb_release,
+	.fb_read = NULL,
+	.fb_write = NULL,
+	.fb_cursor = NULL,
+	.fb_check_var = msm_fb_check_var,	/* vinfo check */
+	.fb_set_par = msm_fb_set_par,	/* set the video mode according to info->var */
+	.fb_setcolreg = NULL,	/* set color register */
+	.fb_blank = msm_fb_blank,	/* blank display */
+	.fb_pan_display = msm_fb_pan_display,	/* pan display */
+	.fb_fillrect = msm_fb_fillrect,	/* Draws a rectangle */
+	.fb_copyarea = msm_fb_copyarea,	/* Copy data from area to another */
+	.fb_imageblit = msm_fb_imageblit,	/* Draws a image to the display */
+	.fb_rotate = NULL,
+	.fb_sync = NULL,	/* wait for blit idle, optional */
+	.fb_ioctl = msm_fb_ioctl,	/* perform fb specific ioctl (optional) */
+	.fb_mmap = msm_fb_mmap,
+};
+
+static int msm_fb_register(struct msm_fb_data_type *mfd)
+{
+	int ret = -ENODEV;
+	int bpp;
+	struct msm_panel_info *panel_info = &mfd->panel_info;
+	struct fb_info *fbi = mfd->fbi;
+	struct fb_fix_screeninfo *fix;
+	struct fb_var_screeninfo *var;
+	int *id;
+	int fbram_offset;
+
+	/*
+	 * fb info initialization
+	 */
+	fix = &fbi->fix;
+	var = &fbi->var;
+
+	fix->type_aux = 0;	/* if type == FB_TYPE_INTERLEAVED_PLANES */
+	fix->visual = FB_VISUAL_TRUECOLOR;	/* True Color */
+	fix->ywrapstep = 0;	/* No support */
+	fix->mmio_start = 0;	/* No MMIO Address */
+	fix->mmio_len = 0;	/* No MMIO Address */
+	fix->accel = FB_ACCEL_NONE;/* FB_ACCEL_MSM needes to be added in fb.h */
+
+	var->xoffset = 0,	/* Offset from virtual to visible */
+	var->yoffset = 0,	/* resolution */
+	var->grayscale = 0,	/* No graylevels */
+	var->nonstd = 0,	/* standard pixel format */
+	var->activate = FB_ACTIVATE_VBL,	/* activate it at vsync */
+	var->height = -1,	/* height of picture in mm */
+	var->width = -1,	/* width of picture in mm */
+	var->accel_flags = 0,	/* acceleration flags */
+	var->sync = 0,	/* see FB_SYNC_* */
+	var->rotate = 0,	/* angle we rotate counter clockwise */
+	mfd->op_enable = FALSE;
+
+	switch (mfd->fb_imgType) {
+	case MDP_RGB_565:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 11;
+		var->blue.length = 5;
+		var->green.length = 6;
+		var->red.length = 5;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 2;
+		break;
+
+	case MDP_RGB_888:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 8;
+		var->red.offset = 16;
+		var->blue.length = 8;
+		var->green.length = 8;
+		var->red.length = 8;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 3;
+		break;
+
+	case MDP_ARGB_8888:
+		fix->type = FB_TYPE_PACKED_PIXELS;
+		fix->xpanstep = 1;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+		var->blue.offset = 0;
+		var->green.offset = 8;
+		var->red.offset = 16;
+		var->blue.length = 8;
+		var->green.length = 8;
+		var->red.length = 8;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		bpp = 3;
+		break;
+
+	case MDP_YCRYCB_H2V1:
+		/* ToDo: need to check TV-Out YUV422i framebuffer format */
+		/*       we might need to create new type define */
+		fix->type = FB_TYPE_INTERLEAVED_PLANES;
+		fix->xpanstep = 2;
+		fix->ypanstep = 1;
+		var->vmode = FB_VMODE_NONINTERLACED;
+
+		/* how about R/G/B offset? */
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 11;
+		var->blue.length = 5;
+		var->green.length = 6;
+		var->red.length = 5;
+		var->blue.msb_right = 0;
+		var->green.msb_right = 0;
+		var->red.msb_right = 0;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		bpp = 2;
+		break;
+
+	default:
+		MSM_FB_ERR("msm_fb_init: fb %d unkown image type!\n",
+			   mfd->index);
+		return ret;
+	}
+
+	/* The adreno GPU hardware requires that the pitch be aligned to
+	   32 pixels for color buffers, so for the cases where the GPU
+	   is writing directly to fb0, the framebuffer pitch
+	   also needs to be 32 pixel aligned */
+
+	if (mfd->index == 0)
+		fix->line_length = ALIGN(panel_info->xres * bpp, 32);
+	else
+		fix->line_length = panel_info->xres * bpp;
+
+	fix->smem_len = fix->line_length * panel_info->yres * mfd->fb_page;
+
+	mfd->var_xres = panel_info->xres;
+	mfd->var_yres = panel_info->yres;
+
+	var->pixclock = mfd->panel_info.clk_rate;
+	mfd->var_pixclock = var->pixclock;
+
+	var->xres = panel_info->xres;
+	var->yres = panel_info->yres;
+	var->xres_virtual = panel_info->xres;
+	var->yres_virtual = panel_info->yres * mfd->fb_page;
+	var->bits_per_pixel = bpp * 8,	/* FrameBuffer color depth */
+		/*
+		 * id field for fb app
+		 */
+	    id = (int *)&mfd->panel;
+
+#if defined(CONFIG_FB_MSM_MDP22)
+	snprintf(fix->id, sizeof(fix->id), "msmfb22_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP30)
+	snprintf(fix->id, sizeof(fix->id), "msmfb30_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP31)
+	snprintf(fix->id, sizeof(fix->id), "msmfb31_%x", (__u32) *id);
+#elif defined(CONFIG_FB_MSM_MDP40)
+	snprintf(fix->id, sizeof(fix->id), "msmfb40_%x", (__u32) *id);
+#else
+	error CONFIG_FB_MSM_MDP undefined !
+#endif
+	 fbi->fbops = &msm_fb_ops;
+	fbi->flags = FBINFO_FLAG_DEFAULT;
+	fbi->pseudo_palette = msm_fb_pseudo_palette;
+
+	mfd->ref_cnt = 0;
+	mfd->sw_currently_refreshing = FALSE;
+	mfd->sw_refreshing_enable = TRUE;
+	mfd->panel_power_on = FALSE;
+
+	mfd->pan_waiting = FALSE;
+	init_completion(&mfd->pan_comp);
+	init_completion(&mfd->refresher_comp);
+	init_MUTEX(&mfd->sem);
+
+	fbram_offset = PAGE_ALIGN((int)fbram)-(int)fbram;
+	fbram += fbram_offset;
+	fbram_phys += fbram_offset;
+	fbram_size -= fbram_offset;
+
+	if (fbram_size < fix->smem_len) {
+		printk(KERN_ERR "error: no more framebuffer memory!\n");
+		return -ENOMEM;
+	}
+
+	fbi->screen_base = fbram;
+	fbi->fix.smem_start = (unsigned long)fbram_phys;
+
+	memset(fbi->screen_base, 0x0, fix->smem_len);
+
+	mfd->op_enable = TRUE;
+	mfd->panel_power_on = FALSE;
+
+	/* cursor memory allocation */
+	if (mfd->cursor_update) {
+		mfd->cursor_buf = dma_alloc_coherent(NULL,
+					MDP_CURSOR_SIZE,
+					(dma_addr_t *) &mfd->cursor_buf_phys,
+					GFP_KERNEL);
+		if (!mfd->cursor_buf)
+			mfd->cursor_update = 0;
+	}
+
+	if (mfd->lut_update) {
+		ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+		if (ret)
+			printk(KERN_ERR "%s: fb_alloc_cmap() failed!\n",
+					__func__);
+	}
+
+	if (register_framebuffer(fbi) < 0) {
+		if (mfd->lut_update)
+			fb_dealloc_cmap(&fbi->cmap);
+
+		if (mfd->cursor_buf)
+			dma_free_coherent(NULL,
+				MDP_CURSOR_SIZE,
+				mfd->cursor_buf,
+				(dma_addr_t) mfd->cursor_buf_phys);
+
+		mfd->op_enable = FALSE;
+		return -EPERM;
+	}
+
+	fbram += fix->smem_len;
+	fbram_phys += fix->smem_len;
+	fbram_size -= fix->smem_len;
+
+	MSM_FB_INFO
+	    ("FrameBuffer[%d] %dx%d size=%d bytes is registered successfully!\n",
+	     mfd->index, fbi->var.xres, fbi->var.yres, fbi->fix.smem_len);
+
+#ifdef CONFIG_FB_MSM_LOGO
+	if (!load_565rle_image(INIT_IMAGE_FILE)) ;	/* Flip buffer */
+#endif
+	ret = 0;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	mfd->early_suspend.suspend = msmfb_early_suspend;
+	mfd->early_suspend.resume = msmfb_early_resume;
+	mfd->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB - 2;
+	register_early_suspend(&mfd->early_suspend);
+#endif
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+		struct dentry *sub_dir;
+		char sub_name[2];
+
+		root = msm_fb_get_debugfs_root();
+		if (root != NULL) {
+			sub_name[0] = (char)(mfd->index + 0x30);
+			sub_name[1] = '\0';
+			sub_dir = debugfs_create_dir(sub_name, root);
+		} else {
+			sub_dir = NULL;
+		}
+
+		mfd->sub_dir = sub_dir;
+
+		if (sub_dir) {
+			msm_fb_debugfs_file_create(sub_dir, "op_enable",
+						   (u32 *) &mfd->op_enable);
+			msm_fb_debugfs_file_create(sub_dir, "panel_power_on",
+						   (u32 *) &mfd->
+						   panel_power_on);
+			msm_fb_debugfs_file_create(sub_dir, "ref_cnt",
+						   (u32 *) &mfd->ref_cnt);
+			msm_fb_debugfs_file_create(sub_dir, "fb_imgType",
+						   (u32 *) &mfd->fb_imgType);
+			msm_fb_debugfs_file_create(sub_dir,
+						   "sw_currently_refreshing",
+						   (u32 *) &mfd->
+						   sw_currently_refreshing);
+			msm_fb_debugfs_file_create(sub_dir,
+						   "sw_refreshing_enable",
+						   (u32 *) &mfd->
+						   sw_refreshing_enable);
+
+			msm_fb_debugfs_file_create(sub_dir, "xres",
+						   (u32 *) &mfd->panel_info.
+						   xres);
+			msm_fb_debugfs_file_create(sub_dir, "yres",
+						   (u32 *) &mfd->panel_info.
+						   yres);
+			msm_fb_debugfs_file_create(sub_dir, "bpp",
+						   (u32 *) &mfd->panel_info.
+						   bpp);
+			msm_fb_debugfs_file_create(sub_dir, "type",
+						   (u32 *) &mfd->panel_info.
+						   type);
+			msm_fb_debugfs_file_create(sub_dir, "wait_cycle",
+						   (u32 *) &mfd->panel_info.
+						   wait_cycle);
+			msm_fb_debugfs_file_create(sub_dir, "pdest",
+						   (u32 *) &mfd->panel_info.
+						   pdest);
+			msm_fb_debugfs_file_create(sub_dir, "backbuff",
+						   (u32 *) &mfd->panel_info.
+						   fb_num);
+			msm_fb_debugfs_file_create(sub_dir, "clk_rate",
+						   (u32 *) &mfd->panel_info.
+						   clk_rate);
+			msm_fb_debugfs_file_create(sub_dir, "frame_count",
+						   (u32 *) &mfd->panel_info.
+						   frame_count);
+
+
+			switch (mfd->dest) {
+			case DISPLAY_LCD:
+				msm_fb_debugfs_file_create(sub_dir,
+				"vsync_enable",
+				(u32 *)&mfd->panel_info.lcd.vsync_enable);
+				msm_fb_debugfs_file_create(sub_dir,
+				"refx100",
+				(u32 *) &mfd->panel_info.lcd. refx100);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_back_porch",
+				(u32 *) &mfd->panel_info.lcd.v_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_front_porch",
+				(u32 *) &mfd->panel_info.lcd.v_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_pulse_width",
+				(u32 *) &mfd->panel_info.lcd.v_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"hw_vsync_mode",
+				(u32 *) &mfd->panel_info.lcd.hw_vsync_mode);
+				msm_fb_debugfs_file_create(sub_dir,
+				"vsync_notifier_period", (u32 *)
+				&mfd->panel_info.lcd.vsync_notifier_period);
+				break;
+
+			case DISPLAY_LCDC:
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_back_porch",
+				(u32 *) &mfd->panel_info.lcdc.h_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_front_porch",
+				(u32 *) &mfd->panel_info.lcdc.h_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"h_pulse_width",
+				(u32 *) &mfd->panel_info.lcdc.h_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_back_porch",
+				(u32 *) &mfd->panel_info.lcdc.v_back_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_front_porch",
+				(u32 *) &mfd->panel_info.lcdc.v_front_porch);
+				msm_fb_debugfs_file_create(sub_dir,
+				"v_pulse_width",
+				(u32 *) &mfd->panel_info.lcdc.v_pulse_width);
+				msm_fb_debugfs_file_create(sub_dir,
+				"border_clr",
+				(u32 *) &mfd->panel_info.lcdc.border_clr);
+				msm_fb_debugfs_file_create(sub_dir,
+				"underflow_clr",
+				(u32 *) &mfd->panel_info.lcdc.underflow_clr);
+				msm_fb_debugfs_file_create(sub_dir,
+				"hsync_skew",
+				(u32 *) &mfd->panel_info.lcdc.hsync_skew);
+				break;
+
+			default:
+				break;
+			}
+		}
+	}
+#endif /* MSM_FB_ENABLE_DBGFS */
+
+	return ret;
+}
+
+static int msm_fb_open(struct fb_info *info, int user)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (!mfd->ref_cnt) {
+		mdp_set_dma_pan_info(info, NULL, TRUE);
+
+		if (msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable)) {
+			printk(KERN_ERR "msm_fb_open: can't turn on display!\n");
+			return -1;
+		}
+	}
+
+	mfd->ref_cnt++;
+	return 0;
+}
+
+static int msm_fb_release(struct fb_info *info, int user)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	int ret = 0;
+
+	if (!mfd->ref_cnt) {
+		MSM_FB_INFO("msm_fb_release: try to close unopened fb %d!\n",
+			    mfd->index);
+		return -EINVAL;
+	}
+
+	mfd->ref_cnt--;
+
+	if (!mfd->ref_cnt) {
+		if ((ret =
+		     msm_fb_blank_sub(FB_BLANK_POWERDOWN, info,
+				      mfd->op_enable)) != 0) {
+			printk(KERN_ERR "msm_fb_release: can't turn off display!\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+DECLARE_MUTEX(msm_fb_pan_sem);
+
+static int msm_fb_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct mdp_dirty_region dirty;
+	struct mdp_dirty_region *dirtyPtr = NULL;
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if ((!mfd->op_enable) || (!mfd->panel_power_on))
+		return -EPERM;
+
+	if (var->xoffset > (info->var.xres_virtual - info->var.xres))
+		return -EINVAL;
+
+	if (var->yoffset > (info->var.yres_virtual - info->var.yres))
+		return -EINVAL;
+
+	if (info->fix.xpanstep)
+		info->var.xoffset =
+		    (var->xoffset / info->fix.xpanstep) * info->fix.xpanstep;
+
+	if (info->fix.ypanstep)
+		info->var.yoffset =
+		    (var->yoffset / info->fix.ypanstep) * info->fix.ypanstep;
+
+	/* "UPDT" */
+	if (var->reserved[0] == 0x54445055) {
+		dirty.xoffset = var->reserved[1] & 0xffff;
+		dirty.yoffset = (var->reserved[1] >> 16) & 0xffff;
+
+		if ((var->reserved[2] & 0xffff) <= dirty.xoffset)
+			return -EINVAL;
+		if (((var->reserved[2] >> 16) & 0xffff) <= dirty.yoffset)
+			return -EINVAL;
+
+		dirty.width = (var->reserved[2] & 0xffff) - dirty.xoffset;
+		dirty.height =
+		    ((var->reserved[2] >> 16) & 0xffff) - dirty.yoffset;
+		info->var.yoffset = var->yoffset;
+
+		if (dirty.xoffset < 0)
+			return -EINVAL;
+
+		if (dirty.yoffset < 0)
+			return -EINVAL;
+
+		if ((dirty.xoffset + dirty.width) > info->var.xres)
+			return -EINVAL;
+
+		if ((dirty.yoffset + dirty.height) > info->var.yres)
+			return -EINVAL;
+
+		if ((dirty.width <= 0) || (dirty.height <= 0))
+			return -EINVAL;
+
+		dirtyPtr = &dirty;
+	}
+
+	/* Flip */
+	/* A constant value is used to indicate that we should change the DMA
+	   output buffer instead of just panning */
+
+	if (var->reserved[0] == 0x466c6970) {
+		unsigned long length, address;
+		struct file *p_src_file;
+		struct mdp_img imgdata;
+		int bpp;
+
+		if (mfd->allow_set_offset) {
+			imgdata.memory_id = var->reserved[1];
+			imgdata.priv = var->reserved[2];
+
+			/* If there is no memory ID then we want to reset back
+			   to the original fb visibility */
+			if (var->reserved[1]) {
+				if (var->reserved[4] == MDP_BLIT_SRC_GEM) {
+					panic("waaaaaaaaaaaaaah");
+					if ( /*get_gem_img(&imgdata,
+						(unsigned long *) &address,
+						 &length)*/ -1 < 0) {
+						return -1;
+					}
+				} else {
+					/*get_img(&imgdata, info, &address,
+							&length, &p_src_file);*/
+					panic("waaaaaah");
+				}
+				mfd->ibuf.visible_swapped = TRUE;
+			} else {
+				/* Flip back to the original address
+				   adjusted for xoffset and yoffset */
+
+				bpp = info->var.bits_per_pixel / 8;
+				address = (unsigned long) info->fix.smem_start;
+				address += info->var.xoffset * bpp +
+				info->var.yoffset * info->fix.line_length;
+
+				mfd->ibuf.visible_swapped = FALSE;
+			}
+
+			mdp_set_offset_info(info, address,
+				(var->activate == FB_ACTIVATE_VBL));
+
+			mfd->dma_fnc(mfd);
+			return 0;
+		} else
+			return -EINVAL;
+	}
+
+	down(&msm_fb_pan_sem);
+	mdp_set_dma_pan_info(info, dirtyPtr,
+			     (var->activate == FB_ACTIVATE_VBL));
+	mdp_dma_pan_update(info);
+	up(&msm_fb_pan_sem);
+
+	++mfd->panel_info.frame_count;
+	return 0;
+}
+
+static int msm_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+
+	if (var->rotate != FB_ROTATE_UR)
+		return -EINVAL;
+	if (var->grayscale != info->var.grayscale)
+		return -EINVAL;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		if ((var->green.offset != 5) ||
+			!((var->blue.offset == 11)
+				|| (var->blue.offset == 0)) ||
+			!((var->red.offset == 11)
+				|| (var->red.offset == 0)) ||
+			(var->blue.length != 5) ||
+			(var->green.length != 6) ||
+			(var->red.length != 5) ||
+			(var->blue.msb_right != 0) ||
+			(var->green.msb_right != 0) ||
+			(var->red.msb_right != 0) ||
+			(var->transp.offset != 0) ||
+			(var->transp.length != 0))
+				return -EINVAL;
+		break;
+
+	case 24:
+		if ((var->blue.offset != 0) ||
+			(var->green.offset != 8) ||
+			(var->red.offset != 16) ||
+			(var->blue.length != 8) ||
+			(var->green.length != 8) ||
+			(var->red.length != 8) ||
+			(var->blue.msb_right != 0) ||
+			(var->green.msb_right != 0) ||
+			(var->red.msb_right != 0) ||
+			!(((var->transp.offset == 0) &&
+				(var->transp.length == 0)) ||
+			  ((var->transp.offset == 24) &&
+				(var->transp.length == 8))))
+				return -EINVAL;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((var->xres_virtual <= 0) || (var->yres_virtual <= 0))
+		return -EINVAL;
+
+	if (info->fix.smem_len <
+		(var->xres_virtual*var->yres_virtual*(var->bits_per_pixel/8)))
+		return -EINVAL;
+
+	if ((var->xres == 0) || (var->yres == 0))
+		return -EINVAL;
+
+	if ((var->xres > mfd->panel_info.xres) ||
+		(var->yres > mfd->panel_info.yres))
+		return -EINVAL;
+
+	if (var->xoffset > (var->xres_virtual - var->xres))
+		return -EINVAL;
+
+	if (var->yoffset > (var->yres_virtual - var->yres))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int msm_fb_set_par(struct fb_info *info)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int old_imgType;
+	int blank = 0;
+
+	old_imgType = mfd->fb_imgType;
+	switch (var->bits_per_pixel) {
+	case 16:
+		if (var->red.offset == 0)
+			mfd->fb_imgType = MDP_BGR_565;
+		else
+			mfd->fb_imgType = MDP_RGB_565;
+		break;
+
+	case 24:
+		if ((var->transp.offset == 0) && (var->transp.length == 0))
+			mfd->fb_imgType = MDP_RGB_888;
+		else if ((var->transp.offset == 24) &&
+				(var->transp.length == 8)) {
+			mfd->fb_imgType = MDP_ARGB_8888;
+			info->var.bits_per_pixel = 32;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((mfd->var_pixclock != var->pixclock) ||
+		(mfd->hw_refresh && ((mfd->fb_imgType != old_imgType) ||
+				(mfd->var_pixclock != var->pixclock) ||
+				(mfd->var_xres != var->xres) ||
+				(mfd->var_yres != var->yres)))) {
+		mfd->var_xres = var->xres;
+		mfd->var_yres = var->yres;
+		mfd->var_pixclock = var->pixclock;
+		blank = 1;
+	}
+
+	if (blank) {
+		msm_fb_blank_sub(FB_BLANK_POWERDOWN, info, mfd->op_enable);
+		msm_fb_blank_sub(FB_BLANK_UNBLANK, info, mfd->op_enable);
+	}
+
+	return 0;
+}
+
+static int msm_fb_stop_sw_refresher(struct msm_fb_data_type *mfd)
+{
+	if (mfd->hw_refresh)
+		return -EPERM;
+
+	if (mfd->sw_currently_refreshing) {
+		down(&mfd->sem);
+		mfd->sw_currently_refreshing = FALSE;
+		up(&mfd->sem);
+
+		/* wait until the refresher finishes the last job */
+		wait_for_completion_killable(&mfd->refresher_comp);
+	}
+
+	return 0;
+}
+
+int msm_fb_resume_sw_refresher(struct msm_fb_data_type *mfd)
+{
+	boolean do_refresh;
+
+	if (mfd->hw_refresh)
+		return -EPERM;
+
+	down(&mfd->sem);
+	if ((!mfd->sw_currently_refreshing) && (mfd->sw_refreshing_enable)) {
+		do_refresh = TRUE;
+		mfd->sw_currently_refreshing = TRUE;
+	} else {
+		do_refresh = FALSE;
+	}
+	up(&mfd->sem);
+
+	if (do_refresh)
+		mdp_refresh_screen((unsigned long)mfd);
+
+	return 0;
+}
+
+void mdp_ppp_put_img(struct file *p_src_file, struct file *p_dst_file)
+{
+#ifdef CONFIG_ANDROID_PMEM
+	if (p_src_file)
+		put_pmem_file(p_src_file);
+	if (p_dst_file)
+		put_pmem_file(p_dst_file);
+#endif
+}
+
+int mdp_blit(struct fb_info *info, struct mdp_blit_req *req)
+{
+	int ret;
+	struct file *p_src_file = 0, *p_dst_file = 0;
+	if (unlikely(req->src_rect.h == 0 || req->src_rect.w == 0)) {
+		printk(KERN_ERR "mpd_ppp: src img of zero size!\n");
+		return -EINVAL;
+	}
+	if (unlikely(req->dst_rect.h == 0 || req->dst_rect.w == 0))
+		return 0;
+
+	ret = mdp_ppp_blit(info, req, &p_src_file, &p_dst_file);
+	mdp_ppp_put_img(p_src_file, p_dst_file);
+	return ret;
+}
+
+typedef void (*msm_dma_barrier_function_pointer) (void *, size_t);
+
+static inline void msm_fb_dma_barrier_for_rect(struct fb_info *info,
+			struct mdp_img *img, struct mdp_rect *rect,
+			msm_dma_barrier_function_pointer dma_barrier_fp
+			)
+{
+	/*
+	 * Compute the start and end addresses of the rectangles.
+	 * NOTE: As currently implemented, the data between
+	 *       the end of one row and the start of the next is
+	 *       included in the address range rather than
+	 *       doing multiple calls for each row.
+	 */
+
+	char * const pmem_start = info->screen_base;
+/*	int bytes_per_pixel = mdp_get_bytes_per_pixel(img->format);
+	unsigned long start = (unsigned long)pmem_start + img->offset +
+		(img->width * rect->y + rect->x) * bytes_per_pixel;
+	size_t size  = ((rect->h - 1) * img->width + rect->w) * bytes_per_pixel;
+	(*dma_barrier_fp) ((void *) start, size);
+*/
+	panic("waaaaah");
+}
+
+static inline void msm_dma_nc_pre(void)
+{
+	dmb();
+}
+static inline void msm_dma_wt_pre(void)
+{
+	dmb();
+}
+static inline void msm_dma_todevice_wb_pre(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_pre_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_pre(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_pre_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_nc_post(void)
+{
+	dmb();
+}
+
+static inline void msm_dma_fromdevice_wt_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+static inline void msm_dma_todevice_wb_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_TO_DEVICE);
+}
+
+static inline void msm_dma_fromdevice_wb_post(void *start, size_t size)
+{
+	#warning this
+//	dma_cache_post_ops(start, size, DMA_FROM_DEVICE);
+}
+
+/*
+ * Do the write barriers required to guarantee data is committed to RAM
+ * (from CPU cache or internal buffers) before a DMA operation starts.
+ * NOTE: As currently implemented, the data between
+ *       the end of one row and the start of the next is
+ *       included in the address range rather than
+ *       doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_before_dma(struct fb_info *info,
+		struct mdp_blit_req *req_list,
+		int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+	int i;
+
+	/*
+	 * Normally, do the requested barriers for each address
+	 * range that corresponds to a rectangle.
+	 *
+	 * But if at least one write barrier is requested for data
+	 * going to or from the device but no address range is
+	 * needed for that barrier, then do the barrier, but do it
+	 * only once, no matter how many requests there are.
+	 */
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	switch (mfd->mdp_fb_page_protection)	{
+	default:
+	case MDP_FB_PAGE_PROTECTION_NONCACHED:
+	case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_START)) {
+				msm_dma_nc_pre();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_START)) {
+				msm_dma_wt_pre();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_START)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].src),
+						&(req_list[i].src_rect),
+						msm_dma_todevice_wb_pre
+						);
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_todevice_wb_pre
+						);
+			}
+		}
+		break;
+	}
+#else
+	dmb();
+#endif
+}
+
+
+/*
+ * Do the write barriers required to guarantee data will be re-read from RAM by
+ * the CPU after a DMA operation ends.
+ * NOTE: As currently implemented, the data between
+ *       the end of one row and the start of the next is
+ *       included in the address range rather than
+ *       doing multiple calls for each row.
+*/
+static void msm_fb_ensure_memory_coherency_after_dma(struct fb_info *info,
+		struct mdp_blit_req *req_list,
+		int req_list_count)
+{
+#ifdef CONFIG_ARCH_QSD8X50
+	int i;
+
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	switch (mfd->mdp_fb_page_protection)	{
+	default:
+	case MDP_FB_PAGE_PROTECTION_NONCACHED:
+	case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		/*
+		 * The following barrier is only done at most once,
+		 * since further calls would be redundant.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags
+				& MDP_NO_DMA_BARRIER_END)) {
+				msm_dma_nc_post();
+				break;
+			}
+		}
+		break;
+
+	case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_END)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_fromdevice_wt_post
+						);
+			}
+		}
+		break;
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+	case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags &
+					MDP_NO_DMA_BARRIER_END)) {
+
+				msm_fb_dma_barrier_for_rect(info,
+						&(req_list[i].dst),
+						&(req_list[i].dst_rect),
+						msm_dma_fromdevice_wb_post
+						);
+			}
+		}
+		break;
+	}
+#else
+	dmb();
+#endif
+}
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+void msm_fb_ensure_mem_coherency_after_dma(struct fb_info *info,
+	struct mdp_blit_req *req_list, int req_list_count)
+{
+	BUG_ON(!info);
+
+	/*
+	 * Ensure that CPU cache and other internal CPU state is
+	 * updated to reflect any change in memory modified by MDP blit
+	 * DMA.
+	 */
+	msm_fb_ensure_memory_coherency_after_dma(info,
+			req_list, req_list_count);
+}
+
+static int msmfb_async_blit(struct fb_info *info, void __user *p)
+{
+	/*
+	 * CAUTION: The names of the struct types intentionally *DON'T* match
+	 * the names of the variables declared -- they appear to be swapped.
+	 * Read the code carefully and you should see that the variable names
+	 * make sense.
+	 */
+	const int MAX_LIST_WINDOW = 16;
+	struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+	struct mdp_blit_req_list req_list_header;
+
+	int count, i, req_list_count;
+
+	/* Get the count size for the total BLIT request. */
+	if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+		return -EFAULT;
+	p += sizeof(req_list_header);
+	count = req_list_header.count;
+	while (count > 0) {
+		/*
+		 * Access the requests through a narrow window to decrease copy
+		 * overhead and make larger requests accessible to the
+		 * coherency management code.
+		 * NOTE: The window size is intended to be larger than the
+		 *       typical request size, but not require more than 2
+		 *       kbytes of stack storage.
+		 */
+		req_list_count = count;
+		if (req_list_count > MAX_LIST_WINDOW)
+			req_list_count = MAX_LIST_WINDOW;
+		if (copy_from_user(&req_list, p,
+				sizeof(struct mdp_blit_req)*req_list_count))
+			return -EFAULT;
+
+		/*
+		 * Ensure that any data CPU may have previously written to
+		 * internal state (but not yet committed to memory) is
+		 * guaranteed to be committed to memory now.
+		 */
+		msm_fb_ensure_memory_coherency_before_dma(info,
+				req_list, req_list_count);
+
+		/*
+		 * Do the blit DMA, if required -- returning early only if
+		 * there is a failure.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags & MDP_NO_BLIT)) {
+				int ret = 0;
+				struct mdp_ppp_djob *job = NULL;
+
+				if (unlikely(req_list[i].src_rect.h == 0 ||
+					req_list[i].src_rect.w == 0)) {
+					MSM_FB_ERR("mpd_ppp: "
+						"src img of zero size!\n");
+					return -EINVAL;
+				}
+
+				if (unlikely(req_list[i].dst_rect.h == 0 ||
+					req_list[i].dst_rect.w == 0))
+					continue;
+
+				/* create a new display job */
+				job = mdp_ppp_new_djob();
+				if (unlikely(!job))
+					return -ENOMEM;
+
+				job->info = info;
+				memcpy(&job->req, &req_list[i],
+					sizeof(struct mdp_blit_req));
+
+				/* Do the actual blit. */
+				ret = mdp_ppp_blit(info, &job->req,
+					&job->p_src_file, &job->p_dst_file);
+
+				/*
+				 * Note that early returns don't guarantee
+				 * memory coherency.
+				 */
+				if (ret || mdp_ppp_get_ret_code()) {
+					mdp_ppp_clear_curr_djob();
+					return ret;
+				}
+			}
+		}
+
+		/* Go to next window of requests. */
+		count -= req_list_count;
+		p += sizeof(struct mdp_blit_req)*req_list_count;
+	}
+	return 0;
+}
+#else
+
+/*
+ * NOTE: The userspace issues blit operations in a sequence, the sequence
+ * start with a operation marked START and ends in an operation marked
+ * END. It is guranteed by the userspace that all the blit operations
+ * between START and END are only within the regions of areas designated
+ * by the START and END operations and that the userspace doesnt modify
+ * those areas. Hence it would be enough to perform barrier/cache operations
+ * only on the START and END operations.
+ */
+static int msmfb_blit(struct fb_info *info, void __user *p)
+{
+	/*
+	 * CAUTION: The names of the struct types intentionally *DON'T* match
+	 * the names of the variables declared -- they appear to be swapped.
+	 * Read the code carefully and you should see that the variable names
+	 * make sense.
+	 */
+	const int MAX_LIST_WINDOW = 16;
+	struct mdp_blit_req req_list[MAX_LIST_WINDOW];
+	struct mdp_blit_req_list req_list_header;
+
+	int count, i, req_list_count;
+
+	/* Get the count size for the total BLIT request. */
+	if (copy_from_user(&req_list_header, p, sizeof(req_list_header)))
+		return -EFAULT;
+	p += sizeof(req_list_header);
+	count = req_list_header.count;
+	while (count > 0) {
+		/*
+		 * Access the requests through a narrow window to decrease copy
+		 * overhead and make larger requests accessible to the
+		 * coherency management code.
+		 * NOTE: The window size is intended to be larger than the
+		 *       typical request size, but not require more than 2
+		 *       kbytes of stack storage.
+		 */
+		req_list_count = count;
+		if (req_list_count > MAX_LIST_WINDOW)
+			req_list_count = MAX_LIST_WINDOW;
+		if (copy_from_user(&req_list, p,
+				sizeof(struct mdp_blit_req)*req_list_count))
+			return -EFAULT;
+
+		/*
+		 * Ensure that any data CPU may have previously written to
+		 * internal state (but not yet committed to memory) is
+		 * guaranteed to be committed to memory now.
+		 */
+		msm_fb_ensure_memory_coherency_before_dma(info,
+				req_list, req_list_count);
+
+		/*
+		 * Do the blit DMA, if required -- returning early only if
+		 * there is a failure.
+		 */
+		for (i = 0; i < req_list_count; i++) {
+			if (!(req_list[i].flags & MDP_NO_BLIT)) {
+				/* Do the actual blit. */
+				int ret = mdp_blit(info, &(req_list[i]));
+
+				/*
+				 * Note that early returns don't guarantee
+				 * memory coherency.
+				 */
+				if (ret)
+					return ret;
+			}
+		}
+
+		/*
+		 * Ensure that CPU cache and other internal CPU state is
+		 * updated to reflect any change in memory modified by MDP blit
+		 * DMA.
+		 */
+		msm_fb_ensure_memory_coherency_after_dma(info,
+				req_list,
+				req_list_count);
+
+		/* Go to next window of requests. */
+		count -= req_list_count;
+		p += sizeof(struct mdp_blit_req)*req_list_count;
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FB_MSM_OVERLAY
+static int msmfb_overlay_get(struct fb_info *info, void __user *p)
+{
+	struct mdp_overlay req;
+	int ret;
+
+	if (copy_from_user(&req, p, sizeof(req)))
+		return -EFAULT;
+
+	ret = mdp4_overlay_get(info, &req);
+	if (ret) {
+		printk(KERN_ERR "%s: ioctl failed \n",
+			__func__);
+		return ret;
+	}
+	if (copy_to_user(p, &req, sizeof(req))) {
+		printk(KERN_ERR "%s: copy2user failed \n",
+			__func__);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int msmfb_overlay_set(struct fb_info *info, void __user *p)
+{
+	struct mdp_overlay req;
+	int ret;
+
+	if (copy_from_user(&req, p, sizeof(req)))
+		return -EFAULT;
+
+	ret = mdp4_overlay_set(info, &req);
+	if (ret) {
+		printk(KERN_ERR "%s:ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	if (copy_to_user(p, &req, sizeof(req))) {
+		printk(KERN_ERR "%s: copy2user failed \n",
+			__func__);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int msmfb_overlay_unset(struct fb_info *info, unsigned long *argp)
+{
+	int	ret, ndx;
+
+	ret = copy_from_user(&ndx, argp, sizeof(ndx));
+	if (ret) {
+		printk(KERN_ERR "%s:msmfb_overlay_unset ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	return mdp4_overlay_unset(info, ndx);
+}
+
+static int msmfb_overlay_play(struct fb_info *info, unsigned long *argp)
+{
+	int	ret;
+	struct msmfb_overlay_data req;
+	struct file *p_src_file = 0;
+
+	ret = copy_from_user(&req, argp, sizeof(req));
+	if (ret) {
+		printk(KERN_ERR "%s:msmfb_overlay_play ioctl failed \n",
+			__func__);
+		return ret;
+	}
+
+	ret = mdp4_overlay_play(info, &req, &p_src_file);
+
+	if (p_src_file)
+		put_pmem_file(p_src_file);
+
+	return ret;
+}
+
+#endif
+
+DECLARE_MUTEX(msm_fb_ioctl_ppp_sem);
+DEFINE_MUTEX(msm_fb_ioctl_lut_sem);
+DEFINE_MUTEX(msm_fb_ioctl_hist_sem);
+
+/* Set color conversion matrix from user space */
+
+#ifndef CONFIG_FB_MSM_MDP40
+static void msmfb_set_color_conv(struct mdp_ccs *p)
+{
+	int i;
+
+	if (p->direction == MDP_CCS_RGB2YUV) {
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		/* RGB->YUV primary forward matrix */
+		for (i = 0; i < MDP_CCS_SIZE; i++)
+			writel(p->ccs[i], MDP_CSC_PFMVn(i));
+
+		#ifdef CONFIG_FB_MSM_MDP31
+		for (i = 0; i < MDP_BV_SIZE; i++)
+			writel(p->bv[i], MDP_CSC_POST_BV2n(i));
+		#endif
+
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	} else {
+		/* MDP cmd block enable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+
+		/* YUV->RGB primary reverse matrix */
+		for (i = 0; i < MDP_CCS_SIZE; i++)
+			writel(p->ccs[i], MDP_CSC_PRMVn(i));
+		for (i = 0; i < MDP_BV_SIZE; i++)
+			writel(p->bv[i], MDP_CSC_PRE_BV1n(i));
+
+		/* MDP cmd block disable */
+		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
+	}
+}
+#endif
+
+
+static int msm_fb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg)
+{
+	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)info->par;
+	void __user *argp = (void __user *)arg;
+	struct fb_cursor cursor;
+	struct fb_cmap cmap;
+	struct mdp_histogram hist;
+#ifndef CONFIG_FB_MSM_MDP40
+	struct mdp_ccs ccs_matrix;
+#endif
+	struct mdp_page_protection fb_page_protection;
+	int ret = 0;
+
+	if (!mfd->op_enable)
+		return -EPERM;
+
+	switch (cmd) {
+#ifdef CONFIG_FB_MSM_OVERLAY
+	case MSMFB_OVERLAY_GET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_get(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_SET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_set(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_UNSET:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_unset(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+	case MSMFB_OVERLAY_PLAY:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_overlay_play(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+#endif
+	case MSMFB_BLIT:
+		down(&msm_fb_ioctl_ppp_sem);
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+		ret = msmfb_async_blit(info, argp);
+		mdp_ppp_wait(); /* Wait for all blits to be finished. */
+#else
+		ret = msmfb_blit(info, argp);
+#endif
+		up(&msm_fb_ioctl_ppp_sem);
+
+		break;
+
+	/* Ioctl for setting ccs matrix from user space */
+	case MSMFB_SET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+		ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix));
+		if (ret) {
+			printk(KERN_ERR
+				"%s:MSMFB_SET_CCS_MATRIX ioctl failed \n",
+				__func__);
+			return ret;
+		}
+
+		down(&msm_fb_ioctl_ppp_sem);
+		if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+			mdp_ccs_rgb2yuv = ccs_matrix;
+		else
+			mdp_ccs_yuv2rgb = ccs_matrix;
+
+		msmfb_set_color_conv(&ccs_matrix) ;
+		up(&msm_fb_ioctl_ppp_sem);
+#else
+		ret = -EINVAL;
+#endif
+
+		break;
+
+	/* Ioctl for getting ccs matrix to user space */
+	case MSMFB_GET_CCS_MATRIX:
+#ifndef CONFIG_FB_MSM_MDP40
+		ret = copy_from_user(&ccs_matrix, argp, sizeof(ccs_matrix)) ;
+		if (ret) {
+			printk(KERN_ERR
+				"%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+				 __func__);
+			return ret;
+		}
+
+		down(&msm_fb_ioctl_ppp_sem);
+		if (ccs_matrix.direction == MDP_CCS_RGB2YUV)
+			ccs_matrix = mdp_ccs_rgb2yuv;
+		 else
+			ccs_matrix =  mdp_ccs_yuv2rgb;
+
+		ret = copy_to_user(argp, &ccs_matrix, sizeof(ccs_matrix));
+
+		if (ret)	{
+			printk(KERN_ERR
+				"%s:MSMFB_GET_CCS_MATRIX ioctl failed \n",
+				 __func__);
+			return ret ;
+		}
+		up(&msm_fb_ioctl_ppp_sem);
+#else
+		ret = -EINVAL;
+#endif
+
+		break;
+
+#ifdef CONFIG_MDP_PPP_ASYNC_OP
+	case MSMFB_ASYNC_BLIT:
+		down(&msm_fb_ioctl_ppp_sem);
+		ret = msmfb_async_blit(info, argp);
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+
+	case MSMFB_BLIT_FLUSH:
+		down(&msm_fb_ioctl_ppp_sem);
+		mdp_ppp_wait();
+		up(&msm_fb_ioctl_ppp_sem);
+		break;
+#endif
+
+	case MSMFB_GRP_DISP:
+#ifdef CONFIG_FB_MSM_MDP22
+		{
+			unsigned long grp_id;
+
+			ret = copy_from_user(&grp_id, argp, sizeof(grp_id));
+			if (ret)
+				return ret;
+
+			mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
+			writel(grp_id, MDP_FULL_BYPASS_WORD43);
+			mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF,
+				      FALSE);
+			break;
+		}
+#else
+		return -EFAULT;
+#endif
+	case MSMFB_SUSPEND_SW_REFRESHER:
+		if (!mfd->panel_power_on)
+			return -EPERM;
+
+		mfd->sw_refreshing_enable = FALSE;
+		ret = msm_fb_stop_sw_refresher(mfd);
+		break;
+
+	case MSMFB_RESUME_SW_REFRESHER:
+		if (!mfd->panel_power_on)
+			return -EPERM;
+
+		mfd->sw_refreshing_enable = TRUE;
+		ret = msm_fb_resume_sw_refresher(mfd);
+		break;
+
+	case MSMFB_CURSOR:
+		ret = copy_from_user(&cursor, argp, sizeof(cursor));
+		if (ret)
+			return ret;
+
+		ret = msm_fb_cursor(info, &cursor);
+		break;
+
+	case MSMFB_SET_LUT:
+		ret = copy_from_user(&cmap, argp, sizeof(cmap));
+		if (ret)
+			return ret;
+
+		mutex_lock(&msm_fb_ioctl_lut_sem);
+		ret = msm_fb_set_lut(&cmap, info);
+		mutex_unlock(&msm_fb_ioctl_lut_sem);
+		break;
+
+	case MSMFB_HISTOGRAM:
+		if (!mfd->do_histogram)
+			return -ENODEV;
+
+		ret = copy_from_user(&hist, argp, sizeof(hist));
+		if (ret)
+			return ret;
+
+		mutex_lock(&msm_fb_ioctl_hist_sem);
+		ret = mfd->do_histogram(info, &hist);
+		mutex_unlock(&msm_fb_ioctl_hist_sem);
+		break;
+
+	case MSMFB_GET_PAGE_PROTECTION:
+		fb_page_protection.page_protection
+			= mfd->mdp_fb_page_protection;
+		ret = copy_to_user(argp, &fb_page_protection,
+				sizeof(fb_page_protection));
+		if (ret)
+				return ret;
+		break;
+
+	case MSMFB_SET_PAGE_PROTECTION:
+#ifdef CONFIG_ARCH_QSD8X50
+		ret = copy_from_user(&fb_page_protection, argp,
+				sizeof(fb_page_protection));
+		if (ret)
+				return ret;
+
+		/* Validate the proposed page protection settings. */
+		switch (fb_page_protection.page_protection)	{
+		case MDP_FB_PAGE_PROTECTION_NONCACHED:
+		case MDP_FB_PAGE_PROTECTION_WRITECOMBINE:
+		case MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE:
+		/* Write-back cache (read allocate)  */
+		case MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE:
+		/* Write-back cache (write allocate) */
+		case MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE:
+			mfd->mdp_fb_page_protection =
+				fb_page_protection.page_protection;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+#else
+		/*
+		 * Don't allow caching until 7k DMA cache operations are
+		 * available.
+		 */
+		ret = -EINVAL;
+#endif
+		break;
+
+	default:
+		MSM_FB_INFO("MDP: unknown ioctl (cmd=%d) received!\n", cmd);
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int msm_fb_register_driver(void)
+{
+	return platform_driver_register(&msm_fb_driver);
+}
+
+void msm_fb_add_device(struct platform_device *pdev)
+{
+	struct msm_fb_panel_data *pdata;
+	struct platform_device *this_dev = NULL;
+	struct fb_info *fbi;
+	struct msm_fb_data_type *mfd = NULL;
+	u32 type, id, fb_num;
+
+	if (!pdev)
+		return;
+	id = pdev->id;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return;
+	type = pdata->panel_info.type;
+	fb_num = pdata->panel_info.fb_num;
+
+	if (fb_num <= 0)
+		return;
+
+	if (fbi_list_index >= MAX_FBI_LIST) {
+		printk(KERN_ERR "msm_fb: no more framebuffer info list!\n");
+		return;
+	}
+	/*
+	 * alloc panel device data
+	 */
+	this_dev = msm_fb_device_alloc(pdata, type, id);
+
+	if (!this_dev) {
+		printk(KERN_ERR
+		"%s: msm_fb_device_alloc failed!\n", __func__);
+		return;
+	}
+
+	/*
+	 * alloc framebuffer info + par data
+	 */
+	fbi = framebuffer_alloc(sizeof(struct msm_fb_data_type), NULL);
+	if (fbi == NULL) {
+		platform_device_put(this_dev);
+		printk(KERN_ERR "msm_fb: can't alloca framebuffer info data!\n");
+		return;
+	}
+
+	mfd = (struct msm_fb_data_type *)fbi->par;
+	mfd->key = MFD_KEY;
+	mfd->fbi = fbi;
+	mfd->panel.type = type;
+	mfd->panel.id = id;
+	mfd->fb_page = fb_num;
+	mfd->index = fbi_list_index;
+	mfd->mdp_fb_page_protection = MDP_FB_PAGE_PROTECTION_WRITECOMBINE;
+
+	/* link to the latest pdev */
+	mfd->pdev = this_dev;
+
+	mfd_list[mfd_list_index++] = mfd;
+	fbi_list[fbi_list_index++] = fbi;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(this_dev, mfd);
+
+	if (platform_device_add(this_dev)) {
+		printk(KERN_ERR "msm_fb: platform_device_add failed!\n");
+		platform_device_put(this_dev);
+		framebuffer_release(fbi);
+		fbi_list_index--;
+		return;
+	}
+}
+EXPORT_SYMBOL(msm_fb_add_device);
+
+int __init msm_fb_init(void)
+{
+	int rc = -ENODEV;
+
+	if (msm_fb_register_driver())
+		return rc;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	{
+		struct dentry *root;
+
+		if ((root = msm_fb_get_debugfs_root()) != NULL) {
+			msm_fb_debugfs_file_create(root,
+						   "msm_fb_msg_printing_level",
+						   (u32 *) &msm_fb_msg_level);
+			msm_fb_debugfs_file_create(root,
+						   "mddi_msg_printing_level",
+						   (u32 *) &mddi_msg_level);
+			msm_fb_debugfs_file_create(root, "msm_fb_debug_enabled",
+						   (u32 *) &msm_fb_debug_enabled);
+		}
+	}
+#endif
+
+	return 0;
+}
+
+module_init(msm_fb_init);
diff --git a/drivers/staging/msm/msm_fb.h b/drivers/staging/msm/msm_fb.h
new file mode 100644
index 0000000..f939138
--- /dev/null
+++ b/drivers/staging/msm/msm_fb.h
@@ -0,0 +1,174 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_H
+#define MSM_FB_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <mach/board.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/memory.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/hrtimer.h>
+
+#include <linux/fb.h>
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+#endif
+
+#include "msm_fb_panel.h"
+#include "mdp.h"
+
+#define MSM_FB_DEFAULT_PAGE_SIZE 2
+#define MFD_KEY  0x11161126
+#define MSM_FB_MAX_DEV_LIST 32
+
+struct disp_info_type_suspend {
+	boolean op_enable;
+	boolean sw_refreshing_enable;
+	boolean panel_power_on;
+};
+
+struct msm_fb_data_type {
+	__u32 key;
+	__u32 index;
+	__u32 ref_cnt;
+	__u32 fb_page;
+
+	panel_id_type panel;
+	struct msm_panel_info panel_info;
+
+	DISP_TARGET dest;
+	struct fb_info *fbi;
+
+	boolean op_enable;
+	uint32 fb_imgType;
+	boolean sw_currently_refreshing;
+	boolean sw_refreshing_enable;
+	boolean hw_refresh;
+
+	MDPIBUF ibuf;
+	boolean ibuf_flushed;
+	struct timer_list refresh_timer;
+	struct completion refresher_comp;
+
+	boolean pan_waiting;
+	struct completion pan_comp;
+
+	/* vsync */
+	boolean use_mdp_vsync;
+	__u32 vsync_gpio;
+	__u32 total_lcd_lines;
+	__u32 total_porch_lines;
+	__u32 lcd_ref_usec_time;
+	__u32 refresh_timer_duration;
+
+	struct hrtimer dma_hrtimer;
+
+	boolean panel_power_on;
+	struct work_struct dma_update_worker;
+	struct semaphore sem;
+
+	struct timer_list vsync_resync_timer;
+	boolean vsync_handler_pending;
+	struct work_struct vsync_resync_worker;
+
+	ktime_t last_vsync_timetick;
+
+	__u32 *vsync_width_boundary;
+
+	unsigned int pmem_id;
+	struct disp_info_type_suspend suspend;
+
+	__u32 channel_irq;
+
+	struct mdp_dma_data *dma;
+	void (*dma_fnc) (struct msm_fb_data_type *mfd);
+	int (*cursor_update) (struct fb_info *info,
+			      struct fb_cursor *cursor);
+	int (*lut_update) (struct fb_info *info,
+			      struct fb_cmap *cmap);
+	int (*do_histogram) (struct fb_info *info,
+			      struct mdp_histogram *hist);
+	void *cursor_buf;
+	void *cursor_buf_phys;
+
+	void *cmd_port;
+	void *data_port;
+	void *data_port_phys;
+
+	__u32 bl_level;
+
+	struct platform_device *pdev;
+
+	__u32 var_xres;
+	__u32 var_yres;
+	__u32 var_pixclock;
+
+#ifdef MSM_FB_ENABLE_DBGFS
+	struct dentry *sub_dir;
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+	struct early_suspend early_suspend;
+	struct early_suspend mddi_early_suspend;
+	struct early_suspend mddi_ext_early_suspend;
+#endif
+	u32 mdp_fb_page_protection;
+	int allow_set_offset;
+};
+
+struct dentry *msm_fb_get_debugfs_root(void);
+void msm_fb_debugfs_file_create(struct dentry *root, const char *name,
+				u32 *var);
+void msm_fb_set_backlight(struct msm_fb_data_type *mfd, __u32 bkl_lvl,
+				u32 save);
+
+void msm_fb_add_device(struct platform_device *pdev);
+
+int msm_fb_detect_client(const char *name);
+
+#ifdef CONFIG_FB_BACKLIGHT
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd);
+#endif
+
+#endif /* MSM_FB_H */
diff --git a/drivers/staging/msm/msm_fb_bl.c b/drivers/staging/msm/msm_fb_bl.c
new file mode 100644
index 0000000..033fc94
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_bl.c
@@ -0,0 +1,79 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/backlight.h>
+
+#include "msm_fb.h"
+
+static int msm_fb_bl_get_brightness(struct backlight_device *pbd)
+{
+	return pbd->props.brightness;
+}
+
+static int msm_fb_bl_update_status(struct backlight_device *pbd)
+{
+	struct msm_fb_data_type *mfd = bl_get_data(pbd);
+	__u32 bl_lvl;
+
+	bl_lvl = pbd->props.brightness;
+	bl_lvl = mfd->fbi->bl_curve[bl_lvl];
+	msm_fb_set_backlight(mfd, bl_lvl, 1);
+	return 0;
+}
+
+static struct backlight_ops msm_fb_bl_ops = {
+	.get_brightness = msm_fb_bl_get_brightness,
+	.update_status = msm_fb_bl_update_status,
+};
+
+void msm_fb_config_backlight(struct msm_fb_data_type *mfd)
+{
+	struct msm_fb_panel_data *pdata;
+	struct backlight_device *pbd;
+	struct fb_info *fbi;
+	char name[16];
+
+	fbi = mfd->fbi;
+	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;
+
+	if ((pdata) && (pdata->set_backlight)) {
+		snprintf(name, sizeof(name), "msmfb_bl%d", mfd->index);
+		pbd =
+		    backlight_device_register(name, fbi->dev, mfd,
+					      &msm_fb_bl_ops);
+		if (!IS_ERR(pbd)) {
+			fbi->bl_dev = pbd;
+			fb_bl_default_curve(fbi,
+					    0,
+					    mfd->panel_info.bl_min,
+					    mfd->panel_info.bl_max);
+			pbd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
+			pbd->props.brightness = FB_BACKLIGHT_LEVELS - 1;
+			backlight_update_status(pbd);
+		} else {
+			fbi->bl_dev = NULL;
+			printk(KERN_ERR "msm_fb: backlight_device_register failed!\n");
+		}
+	}
+}
diff --git a/drivers/staging/msm/msm_fb_def.h b/drivers/staging/msm/msm_fb_def.h
new file mode 100644
index 0000000..6de4409
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_def.h
@@ -0,0 +1,201 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_DEF_H
+#define MSM_FB_DEF_H
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include "msm_mdp.h"
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+#include <linux/console.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include "linux/proc_fs.h"
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/platform_device.h>
+
+typedef s64 int64;
+typedef s32 int32;
+typedef s16 int16;
+typedef s8 int8;
+
+typedef u64 uint64;
+typedef u32 uint32;
+typedef u16 uint16;
+typedef u8 uint8;
+
+typedef s32 int4;
+typedef s16 int2;
+typedef s8 int1;
+
+typedef u32 uint4;
+typedef u16 uint2;
+typedef u8 uint1;
+
+typedef u32 dword;
+typedef u16 word;
+typedef u8 byte;
+
+typedef unsigned int boolean;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define MSM_FB_ENABLE_DBGFS
+#define FEATURE_MDDI
+
+#define outp32(addr, val) writel(val, addr)
+#define outp16(addr, val) writew(val, addr)
+#define outp8(addr, val) writeb(val, addr)
+#define outp(addr, val) outp32(addr, val)
+
+#ifndef MAX
+#define  MAX( x, y ) (((x) > (y)) ? (x) : (y))
+#endif
+
+#ifndef MIN
+#define  MIN( x, y ) (((x) < (y)) ? (x) : (y))
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+#define inp32(addr) readl(addr)
+#define inp16(addr) readw(addr)
+#define inp8(addr) readb(addr)
+#define inp(addr) inp32(addr)
+
+#define inpw(port)             readw(port)
+#define outpw(port, val)       writew(val, port)
+#define inpdw(port)            readl(port)
+#define outpdw(port, val)      writel(val, port)
+
+
+#define clk_busy_wait(x) msleep_interruptible((x)/1000)
+
+#define memory_barrier()
+
+#define assert(expr) \
+	if(!(expr)) { \
+		printk(KERN_ERR "msm_fb: assertion failed! %s,%s,%s,line=%d\n",\
+			#expr, __FILE__, __func__, __LINE__); \
+	}
+
+#define ASSERT(x)   assert(x)
+
+#define DISP_EBI2_LOCAL_DEFINE
+#ifdef DISP_EBI2_LOCAL_DEFINE
+#define LCD_PRIM_BASE_PHYS 0x98000000
+#define LCD_SECD_BASE_PHYS 0x9c000000
+#define EBI2_PRIM_LCD_RS_PIN 0x20000
+#define EBI2_SECD_LCD_RS_PIN 0x20000
+
+#define EBI2_PRIM_LCD_CLR 0xC0
+#define EBI2_PRIM_LCD_SEL 0x40
+
+#define EBI2_SECD_LCD_CLR 0x300
+#define EBI2_SECD_LCD_SEL 0x100
+#endif
+
+extern u32 msm_fb_msg_level;
+
+/*
+ * Message printing priorities:
+ * LEVEL 0 KERN_EMERG (highest priority)
+ * LEVEL 1 KERN_ALERT
+ * LEVEL 2 KERN_CRIT
+ * LEVEL 3 KERN_ERR
+ * LEVEL 4 KERN_WARNING
+ * LEVEL 5 KERN_NOTICE
+ * LEVEL 6 KERN_INFO
+ * LEVEL 7 KERN_DEBUG (Lowest priority)
+ */
+#define MSM_FB_EMERG(msg, ...)    \
+	if (msm_fb_msg_level > 0)  \
+		printk(KERN_EMERG msg, ## __VA_ARGS__);
+#define MSM_FB_ALERT(msg, ...)    \
+	if (msm_fb_msg_level > 1)  \
+		printk(KERN_ALERT msg, ## __VA_ARGS__);
+#define MSM_FB_CRIT(msg, ...)    \
+	if (msm_fb_msg_level > 2)  \
+		printk(KERN_CRIT msg, ## __VA_ARGS__);
+#define MSM_FB_ERR(msg, ...)    \
+	if (msm_fb_msg_level > 3)  \
+		printk(KERN_ERR msg, ## __VA_ARGS__);
+#define MSM_FB_WARNING(msg, ...)    \
+	if (msm_fb_msg_level > 4)  \
+		printk(KERN_WARNING msg, ## __VA_ARGS__);
+#define MSM_FB_NOTICE(msg, ...)    \
+	if (msm_fb_msg_level > 5)  \
+		printk(KERN_NOTICE msg, ## __VA_ARGS__);
+#define MSM_FB_INFO(msg, ...)    \
+	if (msm_fb_msg_level > 6)  \
+		printk(KERN_INFO msg, ## __VA_ARGS__);
+#define MSM_FB_DEBUG(msg, ...)    \
+	if (msm_fb_msg_level > 7)  \
+		printk(KERN_DEBUG msg, ## __VA_ARGS__);
+
+#ifdef MSM_FB_C
+unsigned char *msm_mdp_base;
+unsigned char *msm_pmdh_base;
+unsigned char *msm_emdh_base;
+#else
+extern unsigned char *msm_mdp_base;
+extern unsigned char *msm_pmdh_base;
+extern unsigned char *msm_emdh_base;
+#endif
+
+#endif /* MSM_FB_DEF_H */
diff --git a/drivers/staging/msm/msm_fb_panel.c b/drivers/staging/msm/msm_fb_panel.c
new file mode 100644
index 0000000..b17a239
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.c
@@ -0,0 +1,136 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
+#include <linux/debugfs.h>
+
+#include "msm_fb_panel.h"
+
+int panel_next_on(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_panel_data *pdata;
+	struct msm_fb_panel_data *next_pdata;
+	struct platform_device *next_pdev;
+
+	pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+	if (pdata) {
+		next_pdev = pdata->next;
+		if (next_pdev) {
+			next_pdata =
+			    (struct msm_fb_panel_data *)next_pdev->dev.
+			    platform_data;
+			if ((next_pdata) && (next_pdata->on))
+				ret = next_pdata->on(next_pdev);
+		}
+	}
+
+	return ret;
+}
+
+int panel_next_off(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct msm_fb_panel_data *pdata;
+	struct msm_fb_panel_data *next_pdata;
+	struct platform_device *next_pdev;
+
+	pdata = (struct msm_fb_panel_data *)pdev->dev.platform_data;
+
+	if (pdata) {
+		next_pdev = pdata->next;
+		if (next_pdev) {
+			next_pdata =
+			    (struct msm_fb_panel_data *)next_pdev->dev.
+			    platform_data;
+			if ((next_pdata) && (next_pdata->on))
+				ret = next_pdata->off(next_pdev);
+		}
+	}
+
+	return ret;
+}
+
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+						u32 type, u32 id)
+{
+	struct platform_device *this_dev = NULL;
+	char dev_name[16];
+
+	switch (type) {
+	case EBI2_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "ebi2_lcd");
+		break;
+
+	case MDDI_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "mddi");
+		break;
+
+	case EXT_MDDI_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "mddi_ext");
+		break;
+
+	case TV_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "tvenc");
+		break;
+
+	case HDMI_PANEL:
+	case LCDC_PANEL:
+		snprintf(dev_name, sizeof(dev_name), "lcdc");
+		break;
+
+	default:
+		return NULL;
+	}
+
+	if (pdata != NULL)
+		pdata->next = NULL;
+	else
+		return NULL;
+
+	this_dev =
+	    platform_device_alloc(dev_name, ((u32) type << 16) | (u32) id);
+
+	if (this_dev) {
+		if (platform_device_add_data
+		    (this_dev, pdata, sizeof(struct msm_fb_panel_data))) {
+			printk
+			    ("msm_fb_device_alloc: platform_device_add_data failed!\n");
+			platform_device_put(this_dev);
+			return NULL;
+		}
+	}
+
+	return this_dev;
+}
diff --git a/drivers/staging/msm/msm_fb_panel.h b/drivers/staging/msm/msm_fb_panel.h
new file mode 100644
index 0000000..ab45831
--- /dev/null
+++ b/drivers/staging/msm/msm_fb_panel.h
@@ -0,0 +1,145 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef MSM_FB_PANEL_H
+#define MSM_FB_PANEL_H
+
+#include "msm_fb_def.h"
+
+struct msm_fb_data_type;
+
+typedef void (*msm_fb_vsync_handler_type) (void *arg);
+
+/* panel id type */
+typedef struct panel_id_s {
+	uint16 id;
+	uint16 type;
+} panel_id_type;
+
+/* panel type list */
+#define NO_PANEL       0xffff	/* No Panel */
+#define MDDI_PANEL     1	/* MDDI */
+#define EBI2_PANEL     2	/* EBI2 */
+#define LCDC_PANEL     3	/* internal LCDC type */
+#define EXT_MDDI_PANEL 4	/* Ext.MDDI */
+#define TV_PANEL       5	/* TV */
+#define HDMI_PANEL     6	/* HDMI TV */
+
+/* panel class */
+typedef enum {
+	DISPLAY_LCD = 0,	/* lcd = ebi2/mddi */
+	DISPLAY_LCDC,		/* lcdc */
+	DISPLAY_TV,		/* TV Out */
+	DISPLAY_EXT_MDDI,	/* External MDDI */
+} DISP_TARGET;
+
+/* panel device locaiton */
+typedef enum {
+	DISPLAY_1 = 0,		/* attached as first device */
+	DISPLAY_2,		/* attached on second device */
+	MAX_PHYS_TARGET_NUM,
+} DISP_TARGET_PHYS;
+
+/* panel info type */
+struct lcd_panel_info {
+	__u32 vsync_enable;
+	__u32 refx100;
+	__u32 v_back_porch;
+	__u32 v_front_porch;
+	__u32 v_pulse_width;
+	__u32 hw_vsync_mode;
+	__u32 vsync_notifier_period;
+};
+
+struct lcdc_panel_info {
+	__u32 h_back_porch;
+	__u32 h_front_porch;
+	__u32 h_pulse_width;
+	__u32 v_back_porch;
+	__u32 v_front_porch;
+	__u32 v_pulse_width;
+	__u32 border_clr;
+	__u32 underflow_clr;
+	__u32 hsync_skew;
+};
+
+struct mddi_panel_info {
+	__u32 vdopkt;
+};
+
+struct msm_panel_info {
+	__u32 xres;
+	__u32 yres;
+	__u32 bpp;
+	__u32 type;
+	__u32 wait_cycle;
+	DISP_TARGET_PHYS pdest;
+	__u32 bl_max;
+	__u32 bl_min;
+	__u32 fb_num;
+	__u32 clk_rate;
+	__u32 clk_min;
+	__u32 clk_max;
+	__u32 frame_count;
+
+	union {
+		struct mddi_panel_info mddi;
+	};
+
+	union {
+		struct lcd_panel_info lcd;
+		struct lcdc_panel_info lcdc;
+	};
+};
+
+struct msm_fb_panel_data {
+	struct msm_panel_info panel_info;
+	void (*set_rect) (int x, int y, int xres, int yres);
+	void (*set_vsync_notifier) (msm_fb_vsync_handler_type, void *arg);
+	void (*set_backlight) (struct msm_fb_data_type *);
+
+	/* function entry chain */
+	int (*on) (struct platform_device *pdev);
+	int (*off) (struct platform_device *pdev);
+	struct platform_device *next;
+};
+
+/*===========================================================================
+  FUNCTIONS PROTOTYPES
+============================================================================*/
+struct platform_device *msm_fb_device_alloc(struct msm_fb_panel_data *pdata,
+						u32 type, u32 id);
+int panel_next_on(struct platform_device *pdev);
+int panel_next_off(struct platform_device *pdev);
+
+int lcdc_device_register(struct msm_panel_info *pinfo);
+
+int mddi_toshiba_device_register(struct msm_panel_info *pinfo,
+					u32 channel, u32 panel);
+
+#endif /* MSM_FB_PANEL_H */
diff --git a/drivers/staging/msm/msm_mdp.h b/drivers/staging/msm/msm_mdp.h
new file mode 100644
index 0000000..2d5323f
--- /dev/null
+++ b/drivers/staging/msm/msm_mdp.h
@@ -0,0 +1,245 @@
+/* include/linux/msm_mdp.h
+ *
+ * Copyright (C) 2007 Google Incorporated
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MSM_MDP_H_
+#define _MSM_MDP_H_
+
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#define MSMFB_IOCTL_MAGIC 'm'
+#define MSMFB_GRP_DISP          _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int)
+#define MSMFB_BLIT              _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int)
+#define MSMFB_SUSPEND_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 128, unsigned int)
+#define MSMFB_RESUME_SW_REFRESHER _IOW(MSMFB_IOCTL_MAGIC, 129, unsigned int)
+#define MSMFB_CURSOR _IOW(MSMFB_IOCTL_MAGIC, 130, struct fb_cursor)
+#define MSMFB_SET_LUT _IOW(MSMFB_IOCTL_MAGIC, 131, struct fb_cmap)
+#define MSMFB_HISTOGRAM _IOWR(MSMFB_IOCTL_MAGIC, 132, struct mdp_histogram)
+/* new ioctls's for set/get ccs matrix */
+#define MSMFB_GET_CCS_MATRIX  _IOWR(MSMFB_IOCTL_MAGIC, 133, struct mdp_ccs)
+#define MSMFB_SET_CCS_MATRIX  _IOW(MSMFB_IOCTL_MAGIC, 134, struct mdp_ccs)
+#define MSMFB_OVERLAY_SET       _IOWR(MSMFB_IOCTL_MAGIC, 135, \
+						struct mdp_overlay)
+#define MSMFB_OVERLAY_UNSET     _IOW(MSMFB_IOCTL_MAGIC, 136, unsigned int)
+#define MSMFB_OVERLAY_PLAY      _IOW(MSMFB_IOCTL_MAGIC, 137, \
+						struct msmfb_overlay_data)
+#define MSMFB_GET_PAGE_PROTECTION _IOR(MSMFB_IOCTL_MAGIC, 138, \
+					struct mdp_page_protection)
+#define MSMFB_SET_PAGE_PROTECTION _IOW(MSMFB_IOCTL_MAGIC, 139, \
+					struct mdp_page_protection)
+#define MSMFB_OVERLAY_GET      _IOR(MSMFB_IOCTL_MAGIC, 140, \
+						struct mdp_overlay)
+
+/* new ioctls for async MDP ops */
+#define MSMFB_ASYNC_BLIT _IOW(MSMFB_IOCTL_MAGIC, 141, unsigned int)
+#define MSMFB_BLIT_FLUSH _IOR(MSMFB_IOCTL_MAGIC, 142, unsigned int)
+
+#define MDP_IMGTYPE2_START 0x10000
+
+enum {
+	MDP_RGB_565,      /* RGB 565 planer */
+	MDP_XRGB_8888,    /* RGB 888 padded */
+	MDP_Y_CBCR_H2V2,  /* Y and CbCr, pseudo planer w/ Cb is in MSB */
+	MDP_ARGB_8888,    /* ARGB 888 */
+	MDP_RGB_888,      /* RGB 888 planer */
+	MDP_Y_CRCB_H2V2,  /* Y and CrCb, pseudo planer w/ Cr is in MSB */
+	MDP_YCRYCB_H2V1,  /* YCrYCb interleave */
+	MDP_Y_CRCB_H2V1,  /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+	MDP_Y_CBCR_H2V1,   /* Y and CrCb, pseduo planer w/ Cr is in MSB */
+	MDP_RGBA_8888,    /* ARGB 888 */
+	MDP_BGRA_8888,	  /* ABGR 888 */
+	MDP_Y_CRCB_H2V2_TILE,  /* Y and CrCb, pseudo planer tile */
+	MDP_Y_CBCR_H2V2_TILE,  /* Y and CbCr, pseudo planer tile */
+	MDP_IMGTYPE_LIMIT,
+	MDP_BGR_565 = MDP_IMGTYPE2_START,      /* BGR 565 planer */
+	MDP_FB_FORMAT,    /* framebuffer format */
+	MDP_IMGTYPE_LIMIT2 /* Non valid image type after this enum */
+};
+
+enum {
+	PMEM_IMG,
+	FB_IMG,
+};
+
+/* mdp_blit_req flag values */
+#define MDP_ROT_NOP 0
+#define MDP_FLIP_LR 0x1
+#define MDP_FLIP_UD 0x2
+#define MDP_ROT_90 0x4
+#define MDP_ROT_180 (MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_ROT_270 (MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_DITHER 0x8
+#define MDP_BLUR 0x10
+#define MDP_BLEND_FG_PREMULT 0x20000
+
+#define MDP_DEINTERLACE 	0x80000000
+#define MDP_SHARPENING  	0x40000000
+
+#define MDP_NO_DMA_BARRIER_START	0x20000000
+#define MDP_NO_DMA_BARRIER_END		0x10000000
+#define MDP_NO_BLIT			0x08000000
+#define MDP_BLIT_WITH_DMA_BARRIERS	0x000
+#define MDP_BLIT_WITH_NO_DMA_BARRIERS    \
+	(MDP_NO_DMA_BARRIER_START | MDP_NO_DMA_BARRIER_END)
+#define MDP_TRANSP_NOP 0xffffffff
+#define MDP_ALPHA_NOP 0xff
+
+#define MDP_BLIT_SRC_GEM	0x02000000 /* set for GEM, clear for PMEM */
+#define MDP_BLIT_DST_GEM	0x01000000 /* set for GEM, clear for PMEM */
+
+#define MDP_FB_PAGE_PROTECTION_NONCACHED         (0)
+#define MDP_FB_PAGE_PROTECTION_WRITECOMBINE      (1)
+#define MDP_FB_PAGE_PROTECTION_WRITETHROUGHCACHE (2)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKCACHE    (3)
+#define MDP_FB_PAGE_PROTECTION_WRITEBACKWACACHE  (4)
+/* Sentinel: Don't use! */
+#define MDP_FB_PAGE_PROTECTION_INVALID           (5)
+/* Count of the number of MDP_FB_PAGE_PROTECTION_... values. */
+#define MDP_NUM_FB_PAGE_PROTECTION_VALUES        (5)
+
+struct mdp_rect {
+	uint32_t x;
+	uint32_t y;
+	uint32_t w;
+	uint32_t h;
+};
+
+struct mdp_img {
+	uint32_t width;
+	uint32_t height;
+	uint32_t format;
+	uint32_t offset;
+	int memory_id;		/* the file descriptor */
+	uint32_t priv;
+};
+
+/*
+ * {3x3} + {3} ccs matrix
+ */
+
+#define MDP_CCS_RGB2YUV 	0
+#define MDP_CCS_YUV2RGB 	1
+
+#define MDP_CCS_SIZE	9
+#define MDP_BV_SIZE	3
+
+struct mdp_ccs {
+	int direction;			/* MDP_CCS_RGB2YUV or YUV2RGB */
+	uint16_t ccs[MDP_CCS_SIZE];	/* 3x3 color coefficients */
+	uint16_t bv[MDP_BV_SIZE];	/* 1x3 bias vector */
+};
+
+/* The version of the mdp_blit_req structure so that
+ * user applications can selectively decide which functionality
+ * to include
+ */
+
+#define MDP_BLIT_REQ_VERSION 2
+
+struct mdp_blit_req {
+	struct mdp_img src;
+	struct mdp_img dst;
+	struct mdp_rect src_rect;
+	struct mdp_rect dst_rect;
+	uint32_t alpha;
+	uint32_t transp_mask;
+	uint32_t flags;
+	int sharpening_strength;  /* -127 <--> 127, default 64 */
+};
+
+struct mdp_blit_req_list {
+	uint32_t count;
+	struct mdp_blit_req req[];
+};
+
+struct msmfb_data {
+	uint32_t offset;
+	int memory_id;
+	int id;
+};
+
+#define MSMFB_NEW_REQUEST -1
+
+struct msmfb_overlay_data {
+	uint32_t id;
+	struct msmfb_data data;
+};
+
+struct msmfb_img {
+	uint32_t width;
+	uint32_t height;
+	uint32_t format;
+};
+
+struct mdp_overlay {
+	struct msmfb_img src;
+	struct mdp_rect src_rect;
+	struct mdp_rect dst_rect;
+	uint32_t z_order;	/* stage number */
+	uint32_t is_fg;		/* control alpha & transp */
+	uint32_t alpha;
+	uint32_t transp_mask;
+	uint32_t flags;
+	uint32_t id;
+	uint32_t user_data[8];
+};
+
+struct mdp_histogram {
+	uint32_t frame_cnt;
+	uint32_t bin_cnt;
+	uint32_t *r;
+	uint32_t *g;
+	uint32_t *b;
+};
+
+struct mdp_page_protection {
+	uint32_t page_protection;
+};
+
+
+struct msm_panel_common_pdata {
+	int gpio;
+	int (*backlight_level)(int level, int max, int min);
+	int (*pmic_backlight)(int level);
+	int (*panel_num)(void);
+	void (*panel_config_gpio)(int);
+	int *gpio_num;
+};
+
+struct lcdc_platform_data {
+	int (*lcdc_gpio_config)(int on);
+	void (*lcdc_power_save)(int);
+};
+
+struct tvenc_platform_data {
+	int (*pm_vid_en)(int on);
+};
+
+struct mddi_platform_data {
+	void (*mddi_power_save)(int on);
+	int (*mddi_sel_clk)(u32 *clk_rate);
+};
+
+struct msm_fb_platform_data {
+	int (*detect_client)(const char *name);
+	int mddi_prescan;
+	int (*allow_set_offset)(void);
+};
+
+struct msm_hdmi_platform_data {
+	int irq;
+	int (*cable_detect)(int insert);
+};
+
+#endif /*_MSM_MDP_H_*/
diff --git a/drivers/staging/msm/staging-devices.c b/drivers/staging/msm/staging-devices.c
new file mode 100644
index 0000000..0f8ec3e
--- /dev/null
+++ b/drivers/staging/msm/staging-devices.c
@@ -0,0 +1,323 @@
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "msm_mdp.h"
+#include "memory_ll.h"
+//#include "android_pmem.h"
+#include <mach/board.h>
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+
+#define TOUCHPAD_SUSPEND 	34
+#define TOUCHPAD_IRQ 		38
+
+#define MSM_PMEM_MDP_SIZE	0x1591000
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define SMEM_SPINLOCK_I2C	"D:I2C02000021"
+#else
+#define SMEM_SPINLOCK_I2C	"S:6"
+#endif
+
+#define MSM_PMEM_ADSP_SIZE	0x1C00000
+
+#define MSM_FB_SIZE             0x500000
+#define MSM_FB_SIZE_ST15	0x800000
+#define MSM_AUDIO_SIZE		0x80000
+#define MSM_GPU_PHYS_SIZE 	SZ_2M
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE		0xE0000000
+#else
+#define MSM_SMI_BASE		0x00000000
+#endif
+
+#define MSM_SHARED_RAM_PHYS	(MSM_SMI_BASE + 0x00100000)
+
+#define MSM_PMEM_SMI_BASE	(MSM_SMI_BASE + 0x02B00000)
+#define MSM_PMEM_SMI_SIZE	0x01500000
+
+#define MSM_FB_BASE		MSM_PMEM_SMI_BASE
+#define MSM_GPU_PHYS_BASE 	(MSM_FB_BASE + MSM_FB_SIZE)
+#define MSM_PMEM_SMIPOOL_BASE	(MSM_GPU_PHYS_BASE + MSM_GPU_PHYS_SIZE)
+#define MSM_PMEM_SMIPOOL_SIZE	(MSM_PMEM_SMI_SIZE - MSM_FB_SIZE \
+					- MSM_GPU_PHYS_SIZE)
+
+#if defined(CONFIG_FB_MSM_MDP40)
+#define MDP_BASE          0xA3F00000
+#define PMDH_BASE         0xAD600000
+#define EMDH_BASE         0xAD700000
+#define TVENC_BASE        0xAD400000
+#else
+#define MDP_BASE          0xAA200000
+#define PMDH_BASE         0xAA600000
+#define EMDH_BASE         0xAA700000
+#define TVENC_BASE        0xAA400000
+#endif
+
+#define PMEM_KERNEL_EBI1_SIZE	(CONFIG_PMEM_KERNEL_SIZE * 1024 * 1024)
+
+static struct resource msm_fb_resources[] = {
+	{
+		.flags  = IORESOURCE_DMA,
+	}
+};
+
+static struct resource msm_mdp_resources[] = {
+	{
+		.name   = "mdp",
+		.start  = MDP_BASE,
+		.end    = MDP_BASE + 0x000F0000 - 1,
+		.flags  = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device msm_mdp_device = {
+	.name   = "mdp",
+	.id     = 0,
+	.num_resources  = ARRAY_SIZE(msm_mdp_resources),
+	.resource       = msm_mdp_resources,
+};
+
+static struct platform_device msm_lcdc_device = {
+	.name   = "lcdc",
+	.id     = 0,
+};
+
+static int msm_fb_detect_panel(const char *name)
+{
+	int ret = -EPERM;
+
+	if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
+		if (!strncmp(name, "mddi_toshiba_wvga_pt", 20))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if ((machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf())
+			&& !strcmp(name, "lcdc_external"))
+		ret = 0;
+	else if (0 /*machine_is_qsd8x50_grapefruit() */) {
+		if (!strcmp(name, "lcdc_grapefruit_vga"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if (machine_is_qsd8x50_st1()) {
+		if (!strcmp(name, "lcdc_st1_wxga"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	} else if (machine_is_qsd8x50a_st1_5()) {
+		if (!strcmp(name, "lcdc_st15") ||
+		    !strcmp(name, "hdmi_sii9022"))
+			ret = 0;
+		else
+			ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+/* Only allow a small subset of machines to set the offset via
+   FB PAN_DISPLAY */
+
+static int msm_fb_allow_set_offset(void)
+{
+	return (machine_is_qsd8x50_st1() ||
+		machine_is_qsd8x50a_st1_5()) ? 1 : 0;
+}
+
+
+static struct msm_fb_platform_data msm_fb_pdata = {
+	.detect_client = msm_fb_detect_panel,
+	.allow_set_offset = msm_fb_allow_set_offset,
+};
+
+static struct platform_device msm_fb_device = {
+	.name   = "msm_fb",
+	.id     = 0,
+	.num_resources  = ARRAY_SIZE(msm_fb_resources),
+	.resource       = msm_fb_resources,
+	.dev    = {
+		.platform_data = &msm_fb_pdata,
+	}
+};
+
+static void __init qsd8x50_allocate_memory_regions(void)
+{
+	void *addr;
+	unsigned long size;
+	if (machine_is_qsd8x50a_st1_5())
+		size = MSM_FB_SIZE_ST15;
+	else
+		size = MSM_FB_SIZE;
+
+	addr = alloc_bootmem(size); // (void *)MSM_FB_BASE;
+	if (!addr)
+		printk("Failed to allocate bootmem for framebuffer\n");
+
+
+	msm_fb_resources[0].start = __pa(addr);
+	msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
+	pr_info(KERN_ERR "using %lu bytes of SMI at %lx physical for fb\n",
+		size, (unsigned long)addr);
+}
+
+static int msm_fb_lcdc_gpio_config(int on)
+{
+//	return 0;
+	if (machine_is_qsd8x50_st1()) {
+		if (on) {
+			gpio_set_value(32, 1);
+			mdelay(100);
+			gpio_set_value(20, 1);
+			gpio_set_value(17, 1);
+			gpio_set_value(19, 1);
+		} else {
+			gpio_set_value(17, 0);
+			gpio_set_value(19, 0);
+			gpio_set_value(20, 0);
+			mdelay(100);
+			gpio_set_value(32, 0);
+		}
+	} else if (machine_is_qsd8x50a_st1_5()) {
+		if (on) {
+			gpio_set_value(17, 1);
+			gpio_set_value(19, 1);
+			gpio_set_value(20, 1);
+			gpio_set_value(22, 0);
+			gpio_set_value(32, 1);
+			gpio_set_value(155, 1);
+			//st15_hdmi_power(1);
+			gpio_set_value(22, 1);
+
+		} else {
+			gpio_set_value(17, 0);
+			gpio_set_value(19, 0);
+			gpio_set_value(22, 0);
+			gpio_set_value(32, 0);
+			gpio_set_value(155, 0);
+		//	st15_hdmi_power(0);
+		}
+	}
+	return 0;
+}
+
+
+static struct lcdc_platform_data lcdc_pdata = {
+	.lcdc_gpio_config = msm_fb_lcdc_gpio_config,
+};
+
+static struct msm_gpio msm_fb_st15_gpio_config_data[] = {
+	{ GPIO_CFG(17, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en0" },
+	{ GPIO_CFG(19, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "dat_pwr_sv" },
+	{ GPIO_CFG(20, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lvds_pwr_dn" },
+	{ GPIO_CFG(22, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en1" },
+	{ GPIO_CFG(32, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "lcdc_en2" },
+	{ GPIO_CFG(103, 0, GPIO_INPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_irq" },
+	{ GPIO_CFG(155, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_2MA), "hdmi_3v3" },
+};
+
+static struct msm_panel_common_pdata mdp_pdata = {
+	.gpio = 98,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_fb_device,
+};
+
+
+static void __init msm_register_device(struct platform_device *pdev, void *data)
+{
+	int ret;
+
+	pdev->dev.platform_data = data;
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		dev_err(&pdev->dev,
+			  "%s: platform_device_register() failed = %d\n",
+			  __func__, ret);
+}
+
+void __init msm_fb_register_device(char *name, void *data)
+{
+	if (!strncmp(name, "mdp", 3))
+		msm_register_device(&msm_mdp_device, data);
+/*
+	else if (!strncmp(name, "pmdh", 4))
+		msm_register_device(&msm_mddi_device, data);
+	else if (!strncmp(name, "emdh", 4))
+		msm_register_device(&msm_mddi_ext_device, data);
+	else if (!strncmp(name, "ebi2", 4))
+		msm_register_device(&msm_ebi2_lcd_device, data);
+	else if (!strncmp(name, "tvenc", 5))
+		msm_register_device(&msm_tvenc_device, data);
+	else */
+
+	if (!strncmp(name, "lcdc", 4))
+		msm_register_device(&msm_lcdc_device, data);
+	/*else
+		printk(KERN_ERR "%s: unknown device! %s\n", __func__, name);
+*/
+}
+
+static void __init msm_fb_add_devices(void)
+{
+	int rc;
+	msm_fb_register_device("mdp", &mdp_pdata);
+//	msm_fb_register_device("pmdh", &mddi_pdata);
+//	msm_fb_register_device("emdh", &mddi_pdata);
+//	msm_fb_register_device("tvenc", 0);
+
+	if (machine_is_qsd8x50a_st1_5()) {
+/*		rc = st15_hdmi_vreg_init();
+		if (rc)
+			return;
+*/
+		rc = msm_gpios_request_enable(
+			msm_fb_st15_gpio_config_data,
+			ARRAY_SIZE(msm_fb_st15_gpio_config_data));
+		if (rc) {
+			printk(KERN_ERR "%s: unable to init lcdc gpios\n",
+			       __func__);
+			return;
+		}
+		msm_fb_register_device("lcdc", &lcdc_pdata);
+	} else
+		msm_fb_register_device("lcdc", 0);
+}
+
+int __init staging_init_pmem(void)
+{
+	qsd8x50_allocate_memory_regions();
+	return 0;
+}
+
+int __init staging_init_devices(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	msm_fb_add_devices();
+	return 0;
+}
+
+arch_initcall(staging_init_pmem);
+arch_initcall(staging_init_devices);
diff --git a/drivers/staging/msm/tv_ntsc.c b/drivers/staging/msm/tv_ntsc.c
new file mode 100644
index 0000000..5eb6761
--- /dev/null
+++ b/drivers/staging/msm/tv_ntsc.c
@@ -0,0 +1,163 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#define NTSC_TV_DIMENSION_WIDTH      720
+#define NTSC_TV_DIMENSION_HEIGHT     480
+
+static int ntsc_off(struct platform_device *pdev);
+static int ntsc_on(struct platform_device *pdev);
+
+static int ntsc_on(struct platform_device *pdev)
+{
+	uint32 reg = 0;
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+	if (mfd->panel.id == NTSC_M) {
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081B697);
+	} else {
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x008bc4a3);
+		reg |= TVENC_CTL_NTSCJ_MODE;
+	}
+
+	TV_OUT(TV_CGMS, 0x0);
+	/*  NTSC Timing */
+	TV_OUT(TV_SYNC_1, 0x0020009e);
+	TV_OUT(TV_SYNC_2, 0x011306B4);
+	TV_OUT(TV_SYNC_3, 0x0006000C);
+	TV_OUT(TV_SYNC_4, 0x0028020D);
+	TV_OUT(TV_SYNC_5, 0x005E02FB);
+	TV_OUT(TV_SYNC_6, 0x0006000C);
+	TV_OUT(TV_SYNC_7, 0x00000012);
+	TV_OUT(TV_BURST_V1, 0x0013020D);
+	TV_OUT(TV_BURST_V2, 0x0014020C);
+	TV_OUT(TV_BURST_V3, 0x0013020D);
+	TV_OUT(TV_BURST_V4, 0x0014020C);
+	TV_OUT(TV_BURST_H, 0x00AE00F2);
+	TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+	TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+	reg |= TVENC_CTL_TV_MODE_NTSC_M_PAL60;
+
+	reg |= TVENC_CTL_Y_FILTER_EN |
+	    TVENC_CTL_CR_FILTER_EN |
+	    TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+	reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+	TV_OUT(TV_LEVEL, 0x00000000);	/* DC offset to 0. */
+	TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+	TV_OUT(TV_ENC_CTL, reg);
+
+	reg |= TVENC_CTL_ENC_EN;
+	TV_OUT(TV_ENC_CTL, reg);
+
+	return ret;
+}
+
+static int ntsc_off(struct platform_device *pdev)
+{
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+	return 0;
+}
+
+static int __init ntsc_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = ntsc_probe,
+	.driver = {
+		.name   = "tv_ntsc",
+	},
+};
+
+static struct msm_fb_panel_data ntsc_panel_data = {
+	.panel_info.xres = NTSC_TV_DIMENSION_WIDTH,
+	.panel_info.yres = NTSC_TV_DIMENSION_HEIGHT,
+	.panel_info.type = TV_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 16,
+	.panel_info.fb_num = 2,
+	.on = ntsc_on,
+	.off = ntsc_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "tv_ntsc",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &ntsc_panel_data,
+	}
+};
+
+static int __init ntsc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(ntsc_init);
\ No newline at end of file
diff --git a/drivers/staging/msm/tv_pal.c b/drivers/staging/msm/tv_pal.c
new file mode 100644
index 0000000..204da514
--- /dev/null
+++ b/drivers/staging/msm/tv_pal.c
@@ -0,0 +1,213 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include "msm_fb.h"
+#include "tvenc.h"
+
+#ifdef CONFIG_FB_MSM_TVOUT_PAL_M
+#define PAL_TV_DIMENSION_WIDTH      720
+#define PAL_TV_DIMENSION_HEIGHT     480
+#else
+#define PAL_TV_DIMENSION_WIDTH      720
+#define PAL_TV_DIMENSION_HEIGHT     576
+#endif
+
+static int pal_on(struct platform_device *pdev)
+{
+	uint32 reg = 0;
+	int ret = 0;
+	struct msm_fb_data_type *mfd;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+	switch (mfd->panel.id) {
+	case PAL_BDGHIN:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0088c1a0);
+		TV_OUT(TV_CGMS, 0x00012345);
+		TV_OUT(TV_TEST_MUX, 0x0);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x00180097);
+		TV_OUT(TV_SYNC_2, 0x011f06c0);
+		TV_OUT(TV_SYNC_3, 0x0005000a);
+		TV_OUT(TV_SYNC_4, 0x00320271);
+		TV_OUT(TV_SYNC_5, 0x005602f9);
+		TV_OUT(TV_SYNC_6, 0x0005000a);
+		TV_OUT(TV_SYNC_7, 0x0000000f);
+		TV_OUT(TV_BURST_V1, 0x0012026e);
+		TV_OUT(TV_BURST_V2, 0x0011026d);
+		TV_OUT(TV_BURST_V3, 0x00100270);
+		TV_OUT(TV_BURST_V4, 0x0013026f);
+		TV_OUT(TV_BURST_H, 0x00af00ea);
+		TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_BDGHIN;
+		break;
+	case PAL_M:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081b697);
+		TV_OUT(TV_CGMS, 0x000af317);
+		TV_OUT(TV_TEST_MUX, 0x000001c3);
+		TV_OUT(TV_TEST_MODE, 0x00000002);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x0020009e);
+		TV_OUT(TV_SYNC_2, 0x011306b4);
+		TV_OUT(TV_SYNC_3, 0x0006000c);
+		TV_OUT(TV_SYNC_4, 0x0028020D);
+		TV_OUT(TV_SYNC_5, 0x005e02fb);
+		TV_OUT(TV_SYNC_6, 0x0006000c);
+		TV_OUT(TV_SYNC_7, 0x00000012);
+		TV_OUT(TV_BURST_V1, 0x0012020b);
+		TV_OUT(TV_BURST_V2, 0x0016020c);
+		TV_OUT(TV_BURST_V3, 0x00150209);
+		TV_OUT(TV_BURST_V4, 0x0013020c);
+		TV_OUT(TV_BURST_H, 0x00bf010b);
+		TV_OUT(TV_SOL_REQ_ODD, 0x00280208);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x00290209);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_M;
+		break;
+	case PAL_N:
+		/* Cr gain 11, Cb gain C6, y_gain 97 */
+		TV_OUT(TV_GAIN, 0x0081b697);
+		TV_OUT(TV_CGMS, 0x000af317);
+		TV_OUT(TV_TEST_MUX, 0x000001c3);
+		TV_OUT(TV_TEST_MODE, 0x00000002);
+		/*  PAL Timing */
+		TV_OUT(TV_SYNC_1, 0x00180097);
+		TV_OUT(TV_SYNC_2, 0x12006c0);
+		TV_OUT(TV_SYNC_3, 0x0005000a);
+		TV_OUT(TV_SYNC_4, 0x00320271);
+		TV_OUT(TV_SYNC_5, 0x005602f9);
+		TV_OUT(TV_SYNC_6, 0x0005000a);
+		TV_OUT(TV_SYNC_7, 0x0000000f);
+		TV_OUT(TV_BURST_V1, 0x0012026e);
+		TV_OUT(TV_BURST_V2, 0x0011026d);
+		TV_OUT(TV_BURST_V3, 0x00100270);
+		TV_OUT(TV_BURST_V4, 0x0013026f);
+		TV_OUT(TV_BURST_H, 0x00af00fa);
+		TV_OUT(TV_SOL_REQ_ODD, 0x0030026e);
+		TV_OUT(TV_SOL_REQ_EVEN, 0x0031026f);
+
+		reg |= TVENC_CTL_TV_MODE_PAL_N;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	reg |= TVENC_CTL_Y_FILTER_EN |
+	    TVENC_CTL_CR_FILTER_EN |
+	    TVENC_CTL_CB_FILTER_EN | TVENC_CTL_SINX_FILTER_EN;
+#ifdef CONFIG_FB_MSM_TVOUT_SVIDEO
+	reg |= TVENC_CTL_S_VIDEO_EN;
+#endif
+
+	TV_OUT(TV_LEVEL, 0x00000000);	/* DC offset to 0. */
+	TV_OUT(TV_OFFSET, 0x008080f0);
+
+#ifdef CONFIG_FB_MSM_MDP31
+	TV_OUT(TV_DAC_INTF, 0x29);
+#endif
+	TV_OUT(TV_ENC_CTL, reg);
+
+	reg |= TVENC_CTL_ENC_EN;
+	TV_OUT(TV_ENC_CTL, reg);
+
+	return ret;
+}
+
+static int pal_off(struct platform_device *pdev)
+{
+	TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+	return 0;
+}
+
+static int __init pal_probe(struct platform_device *pdev)
+{
+	msm_fb_add_device(pdev);
+
+	return 0;
+}
+
+static struct platform_driver this_driver = {
+	.probe  = pal_probe,
+	.driver = {
+		.name   = "tv_pal",
+	},
+};
+
+static struct msm_fb_panel_data pal_panel_data = {
+	.panel_info.xres = PAL_TV_DIMENSION_WIDTH,
+	.panel_info.yres = PAL_TV_DIMENSION_HEIGHT,
+	.panel_info.type = TV_PANEL,
+	.panel_info.pdest = DISPLAY_1,
+	.panel_info.wait_cycle = 0,
+	.panel_info.bpp = 16,
+	.panel_info.fb_num = 2,
+	.on = pal_on,
+	.off = pal_off,
+};
+
+static struct platform_device this_device = {
+	.name   = "tv_pal",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &pal_panel_data,
+	}
+};
+
+static int __init pal_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&this_driver);
+	if (!ret) {
+		ret = platform_device_register(&this_device);
+		if (ret)
+			platform_driver_unregister(&this_driver);
+	}
+
+	return ret;
+}
+
+module_init(pal_init);
diff --git a/drivers/staging/msm/tvenc.c b/drivers/staging/msm/tvenc.c
new file mode 100644
index 0000000..f41c5ac
--- /dev/null
+++ b/drivers/staging/msm/tvenc.c
@@ -0,0 +1,295 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos_params.h>
+
+#define TVENC_C
+#include "tvenc.h"
+#include "msm_fb.h"
+
+static int tvenc_probe(struct platform_device *pdev);
+static int tvenc_remove(struct platform_device *pdev);
+
+static int tvenc_off(struct platform_device *pdev);
+static int tvenc_on(struct platform_device *pdev);
+
+static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST];
+static int pdev_list_cnt;
+
+static struct clk *tvenc_clk;
+static struct clk *tvdac_clk;
+
+static struct platform_driver tvenc_driver = {
+	.probe = tvenc_probe,
+	.remove = tvenc_remove,
+	.suspend = NULL,
+//	.suspend_late = NULL,
+//	.resume_early = NULL,
+	.resume = NULL,
+	.shutdown = NULL,
+	.driver = {
+		   .name = "tvenc",
+		   },
+};
+
+static struct tvenc_platform_data *tvenc_pdata;
+
+static int tvenc_off(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = panel_next_off(pdev);
+
+	clk_disable(tvenc_clk);
+	clk_disable(tvdac_clk);
+
+	if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+		ret = tvenc_pdata->pm_vid_en(0);
+
+	//pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+	//				PM_QOS_DEFAULT_VALUE);
+
+	if (ret)
+		printk(KERN_ERR "%s: pm_vid_en(off) failed! %d\n",
+		__func__, ret);
+
+	return ret;
+}
+
+static int tvenc_on(struct platform_device *pdev)
+{
+	int ret = 0;
+
+//	pm_qos_update_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+//				128000);
+	if (tvenc_pdata && tvenc_pdata->pm_vid_en)
+		ret = tvenc_pdata->pm_vid_en(1);
+
+	if (ret) {
+		printk(KERN_ERR "%s: pm_vid_en(on) failed! %d\n",
+		__func__, ret);
+		return ret;
+	}
+
+	clk_enable(tvenc_clk);
+	clk_enable(tvdac_clk);
+
+	ret = panel_next_on(pdev);
+
+	return ret;
+}
+
+void tvenc_gen_test_pattern(struct msm_fb_data_type *mfd)
+{
+	uint32 reg = 0, i;
+
+	reg = readl(MSM_TV_ENC_CTL);
+	reg |= TVENC_CTL_TEST_PATT_EN;
+
+	for (i = 0; i < 3; i++) {
+		TV_OUT(TV_ENC_CTL, 0);	/* disable TV encoder */
+
+		switch (i) {
+			/*
+			 * TV Encoder - Color Bar Test Pattern
+			 */
+		case 0:
+			reg |= TVENC_CTL_TPG_CLRBAR;
+			break;
+			/*
+			 * TV Encoder - Red Frame Test Pattern
+			 */
+		case 1:
+			reg |= TVENC_CTL_TPG_REDCLR;
+			break;
+			/*
+			 * TV Encoder - Modulated Ramp Test Pattern
+			 */
+		default:
+			reg |= TVENC_CTL_TPG_MODRAMP;
+			break;
+		}
+
+		TV_OUT(TV_ENC_CTL, reg);
+		mdelay(5000);
+
+		switch (i) {
+			/*
+			 * TV Encoder - Color Bar Test Pattern
+			 */
+		case 0:
+			reg &= ~TVENC_CTL_TPG_CLRBAR;
+			break;
+			/*
+			 * TV Encoder - Red Frame Test Pattern
+			 */
+		case 1:
+			reg &= ~TVENC_CTL_TPG_REDCLR;
+			break;
+			/*
+			 * TV Encoder - Modulated Ramp Test Pattern
+			 */
+		default:
+			reg &= ~TVENC_CTL_TPG_MODRAMP;
+			break;
+		}
+	}
+}
+
+static int tvenc_resource_initialized;
+
+static int tvenc_probe(struct platform_device *pdev)
+{
+	struct msm_fb_data_type *mfd;
+	struct platform_device *mdp_dev = NULL;
+	struct msm_fb_panel_data *pdata = NULL;
+	int rc;
+
+	if (pdev->id == 0) {
+		tvenc_base = ioremap(pdev->resource[0].start,
+					pdev->resource[0].end -
+					pdev->resource[0].start + 1);
+		if (!tvenc_base) {
+			printk(KERN_ERR
+				"tvenc_base ioremap failed!\n");
+			return -ENOMEM;
+		}
+		tvenc_pdata = pdev->dev.platform_data;
+		tvenc_resource_initialized = 1;
+		return 0;
+	}
+
+	if (!tvenc_resource_initialized)
+		return -EPERM;
+
+	mfd = platform_get_drvdata(pdev);
+
+	if (!mfd)
+		return -ENODEV;
+
+	if (mfd->key != MFD_KEY)
+		return -EINVAL;
+
+	if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST)
+		return -ENOMEM;
+
+	if (tvenc_base == NULL)
+		return -ENOMEM;
+
+	mdp_dev = platform_device_alloc("mdp", pdev->id);
+	if (!mdp_dev)
+		return -ENOMEM;
+
+	/*
+	 * link to the latest pdev
+	 */
+	mfd->pdev = mdp_dev;
+	mfd->dest = DISPLAY_TV;
+
+	/*
+	 * alloc panel device data
+	 */
+	if (platform_device_add_data
+	    (mdp_dev, pdev->dev.platform_data,
+	     sizeof(struct msm_fb_panel_data))) {
+		printk(KERN_ERR "tvenc_probe: platform_device_add_data failed!\n");
+		platform_device_put(mdp_dev);
+		return -ENOMEM;
+	}
+	/*
+	 * data chain
+	 */
+	pdata = mdp_dev->dev.platform_data;
+	pdata->on = tvenc_on;
+	pdata->off = tvenc_off;
+	pdata->next = pdev;
+
+	/*
+	 * get/set panel specific fb info
+	 */
+	mfd->panel_info = pdata->panel_info;
+	mfd->fb_imgType = MDP_YCRYCB_H2V1;
+
+	/*
+	 * set driver data
+	 */
+	platform_set_drvdata(mdp_dev, mfd);
+
+	/*
+	 * register in mdp driver
+	 */
+	rc = platform_device_add(mdp_dev);
+	if (rc)
+		goto tvenc_probe_err;
+
+	pdev_list[pdev_list_cnt++] = pdev;
+	return 0;
+
+tvenc_probe_err:
+	platform_device_put(mdp_dev);
+	return rc;
+}
+
+static int tvenc_remove(struct platform_device *pdev)
+{
+//	pm_qos_remove_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc");
+	return 0;
+}
+
+static int tvenc_register_driver(void)
+{
+	return platform_driver_register(&tvenc_driver);
+}
+
+static int __init tvenc_driver_init(void)
+{
+	tvenc_clk = clk_get(NULL, "tv_enc_clk");
+	tvdac_clk = clk_get(NULL, "tv_dac_clk");
+
+	if (IS_ERR(tvenc_clk)) {
+		printk(KERN_ERR "error: can't get tvenc_clk!\n");
+		return IS_ERR(tvenc_clk);
+	}
+
+	if (IS_ERR(tvdac_clk)) {
+		printk(KERN_ERR "error: can't get tvdac_clk!\n");
+		return IS_ERR(tvdac_clk);
+	}
+
+//	pm_qos_add_requirement(PM_QOS_SYSTEM_BUS_FREQ , "tvenc",
+//				PM_QOS_DEFAULT_VALUE);
+	return tvenc_register_driver();
+}
+
+module_init(tvenc_driver_init);
diff --git a/drivers/staging/msm/tvenc.h b/drivers/staging/msm/tvenc.h
new file mode 100644
index 0000000..a682dbe
--- /dev/null
+++ b/drivers/staging/msm/tvenc.h
@@ -0,0 +1,117 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TVENC_H
+#define TVENC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#include <mach/hardware.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include "msm_fb_panel.h"
+
+#define NTSC_M		0 /* North America, Korea */
+#define NTSC_J		1 /* Japan */
+#define PAL_BDGHIN	2 /* Non-argentina PAL-N */
+#define PAL_M		3 /* PAL-M */
+#define PAL_N		4 /* Argentina PAL-N */
+
+/* 3.57954545 Mhz */
+#define TVENC_CTL_TV_MODE_NTSC_M_PAL60  0
+/* 3.57961149 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_M             BIT(0)
+/*non-Argintina = 4.3361875 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_BDGHIN        BIT(1)
+/*Argentina = 3.582055625 Mhz */
+#define TVENC_CTL_TV_MODE_PAL_N             (BIT(1)|BIT(0))
+
+#define TVENC_CTL_ENC_EN                    BIT(2)
+#define TVENC_CTL_CC_EN                     BIT(3)
+#define TVENC_CTL_CGMS_EN                   BIT(4)
+#define TVENC_CTL_MACRO_EN                  BIT(5)
+#define TVENC_CTL_Y_FILTER_W_NOTCH          BIT(6)
+#define TVENC_CTL_Y_FILTER_WO_NOTCH         0
+#define TVENC_CTL_Y_FILTER_EN               BIT(7)
+#define TVENC_CTL_CR_FILTER_EN              BIT(8)
+#define TVENC_CTL_CB_FILTER_EN              BIT(9)
+#define TVENC_CTL_SINX_FILTER_EN            BIT(10)
+#define TVENC_CTL_TEST_PATT_EN              BIT(11)
+#define TVENC_CTL_OUTPUT_INV                BIT(12)
+#define TVENC_CTL_PAL60_MODE                BIT(13)
+#define TVENC_CTL_NTSCJ_MODE                BIT(14)
+#define TVENC_CTL_TPG_CLRBAR                0
+#define TVENC_CTL_TPG_MODRAMP               BIT(15)
+#define TVENC_CTL_TPG_REDCLR                BIT(16)
+#define TVENC_CTL_S_VIDEO_EN                BIT(19)
+
+#ifdef TVENC_C
+void *tvenc_base;
+#else
+extern void *tvenc_base;
+#endif
+
+#define TV_OUT(reg, v)  writel(v, tvenc_base + MSM_##reg)
+
+#define MSM_TV_ENC_CTL			0x00
+#define MSM_TV_LEVEL			0x04
+#define MSM_TV_GAIN			0x08
+#define MSM_TV_OFFSET			0x0c
+#define MSM_TV_CGMS			0x10
+#define MSM_TV_SYNC_1			0x14
+#define MSM_TV_SYNC_2			0x18
+#define MSM_TV_SYNC_3			0x1c
+#define MSM_TV_SYNC_4			0x20
+#define MSM_TV_SYNC_5			0x24
+#define MSM_TV_SYNC_6			0x28
+#define MSM_TV_SYNC_7			0x2c
+#define MSM_TV_BURST_V1			0x30
+#define MSM_TV_BURST_V2			0x34
+#define MSM_TV_BURST_V3			0x38
+#define MSM_TV_BURST_V4			0x3c
+#define MSM_TV_BURST_H			0x40
+#define MSM_TV_SOL_REQ_ODD		0x44
+#define MSM_TV_SOL_REQ_EVEN		0x48
+#define MSM_TV_DAC_CTL			0x4c
+#define MSM_TV_TEST_MUX			0x50
+#define MSM_TV_TEST_MODE		0x54
+#define MSM_TV_TEST_MISR_RESET		0x58
+#define MSM_TV_TEST_EXPORT_MISR		0x5c
+#define MSM_TV_TEST_MISR_CURR_VAL	0x60
+#define MSM_TV_TEST_SOF_CFG		0x64
+#define MSM_TV_DAC_INTF			0x100
+
+#endif /* TVENC_H */
diff --git a/drivers/staging/phison/Kconfig b/drivers/staging/phison/Kconfig
index d3c65d3..1b56119 100644
--- a/drivers/staging/phison/Kconfig
+++ b/drivers/staging/phison/Kconfig
@@ -1,5 +1,5 @@
 config IDE_PHISON
 	tristate "PCIE ATA PS5000 IDE support"
-	depends on PCI && ATA && ATA_SFF
+	depends on PCI && ATA && ATA_SFF && ATA_BMDMA
 	---help---
 	  This is an experimental driver for PS5000 IDE driver.
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 112da7a..6b8268d 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2522,6 +2522,8 @@
 			Status =
 			    copy_to_user(erq->pointer, pAd->nickname,
 					 erq->length);
+			if (Status)
+				Status = -EFAULT;
 			break;
 		}
 	case SIOCGIWRATE:	/*get default bit rate (bps) */
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index b740662..674769d 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -77,6 +77,7 @@
 	{USB_DEVICE(0x083A, 0x7522)},	/* Arcadyan */
 	{USB_DEVICE(0x0CDE, 0x0022)},	/* ZCOM */
 	{USB_DEVICE(0x0586, 0x3416)},	/* Zyxel */
+	{USB_DEVICE(0x0586, 0x341a)},	/* Zyxel NWD-270N */
 	{USB_DEVICE(0x0CDE, 0x0025)},	/* Zyxel */
 	{USB_DEVICE(0x1740, 0x9701)},	/* EnGenius */
 	{USB_DEVICE(0x1740, 0x9702)},	/* EnGenius */
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index dacefea..49ab9fa 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -66,8 +66,6 @@
 static int hwwep = 0;
 static int channels = 0x3fff;
 
-#define eqMacAddr(a, b)		(((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#define cpMacAddr(des, src)		((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 447d647..1b68906 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -112,28 +112,29 @@
 #define CAM_CONTENT_COUNT 8
 
 static const struct usb_device_id rtl8192_usb_id_tbl[] = {
-	/* Realtek */
-	{USB_DEVICE(0x0bda, 0x8171)},
-	{USB_DEVICE(0x0bda, 0x8192)},
-	{USB_DEVICE(0x0bda, 0x8709)},
-	/* Corega */
-	{USB_DEVICE(0x07aa, 0x0043)},
-	/* Belkin */
-	{USB_DEVICE(0x050d, 0x805E)},
-	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
-	/* Sitecom */
-	{USB_DEVICE(0x0df6, 0x0031)},
-	{USB_DEVICE(0x0df6, 0x004b)},	/* WL-349 */
-	/* EnGenius */
-	{USB_DEVICE(0x1740, 0x9201)},
-	/* Dlink */
-	{USB_DEVICE(0x2001, 0x3301)},
-	/* Zinwell */
-	{USB_DEVICE(0x5a57, 0x0290)},
-	/* Guillemot */
-	{USB_DEVICE(0x06f8, 0xe031)},
-	//92SU
+	{USB_DEVICE(0x0bda, 0x8171)}, /* Realtek */
 	{USB_DEVICE(0x0bda, 0x8172)},
+	{USB_DEVICE(0x0bda, 0x8173)},
+	{USB_DEVICE(0x0bda, 0x8174)},
+	{USB_DEVICE(0x0bda, 0x8712)},
+	{USB_DEVICE(0x0bda, 0x8713)},
+	{USB_DEVICE(0x07aa, 0x0047)},
+	{USB_DEVICE(0x07d1, 0x3303)},
+	{USB_DEVICE(0x07d1, 0x3302)},
+	{USB_DEVICE(0x07d1, 0x3300)},
+	{USB_DEVICE(0x1740, 0x9603)},
+	{USB_DEVICE(0x1740, 0x9605)},
+	{USB_DEVICE(0x050d, 0x815F)},
+	{USB_DEVICE(0x06f8, 0xe031)},
+	{USB_DEVICE(0x7392, 0x7611)},
+	{USB_DEVICE(0x7392, 0x7612)},
+	{USB_DEVICE(0x7392, 0x7622)},
+	{USB_DEVICE(0x0DF6, 0x0045)},
+	{USB_DEVICE(0x0E66, 0x0015)},
+	{USB_DEVICE(0x0E66, 0x0016)},
+	{USB_DEVICE(0x0b05, 0x1786)},
+	/* these are not in the official list */
+	{USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
 	{}
 };
 
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2bede27..f38472c 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -121,6 +121,8 @@
 	{USB_DEVICE(0x2001, 0x3301)},
 	/* Zinwell */
 	{USB_DEVICE(0x5a57, 0x0290)},
+	/* LG */
+	{USB_DEVICE(0x043e, 0x7a01)},
 	{}
 };
 
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 0332c37..ecbde34 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -594,8 +594,10 @@
 	dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* allocate memory */
 	if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
@@ -609,8 +611,10 @@
 
 	/* write the memory back to the user space */
 	error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* set the allocation */
 	sep->data_pool_bytes_allocated += command_args.num_bytes;
@@ -661,6 +665,8 @@
 	}
 	/* copy the application data */
 	error = copy_from_user(virt_address, (void *) app_in_address, num_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n");
 	return error;
@@ -711,6 +717,8 @@
 
 	/* copy the application data */
 	error = copy_to_user((void *) app_out_address, virt_address, num_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n");
 	return error;
@@ -1448,8 +1456,10 @@
 	dbg("SEP Driver:--------> sep_create_sync_dma_tables_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_sync_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	edbg("app_in_address is %08lx\n", command_args.app_in_address);
 	edbg("app_out_address is %08lx\n", command_args.app_out_address);
@@ -1799,8 +1809,10 @@
 		goto end_function;
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* create flow tables */
 	error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress);
@@ -1819,8 +1831,10 @@
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_build_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function_with_error;
+	}
 
 	/* all the flow created  - update the flow entry with temp id */
 	flow_context_ptr->flow_id = SEP_TEMP_FLOW_ID;
@@ -1861,8 +1875,10 @@
 
 	/* get input parameters */
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_flow_table_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* find the flow structure for the flow id */
 	flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id);
@@ -1933,6 +1949,8 @@
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_add_flow_table_t));
+	if (error)
+		error = -EFAULT;
 end_function_with_error:
 	/* free the allocated tables */
 	sep_deallocated_flow_tables(&first_table_data);
@@ -1953,8 +1971,10 @@
 	dbg("SEP Driver:--------> sep_add_flow_tables_message_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_message_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	/* check input */
 	if (command_args.message_size_in_bytes > SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES) {
@@ -1970,6 +1990,8 @@
 	/* copy the message into context */
 	flow_context_ptr->message_size_in_bytes = command_args.message_size_in_bytes;
 	error = copy_from_user(flow_context_ptr->message, (void *) command_args.message_address, command_args.message_size_in_bytes);
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_add_flow_tables_message_handler end\n");
 	return error;
@@ -1994,6 +2016,8 @@
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_static_pool_addr_t));
+	if (error)
+		error = -EFAULT;
 	dbg("SEP Driver:<-------- sep_get_static_pool_addr_handler end\n");
 	return error;
 }
@@ -2010,8 +2034,10 @@
 	dbg("SEP Driver:--------> sep_get_physical_mapped_offset_handler start\n");
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_get_mapped_offset_t));
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
 
 	if (command_args.physical_address < sep->shared_bus) {
 		error = -EINVAL;
@@ -2025,6 +2051,8 @@
 
 	/* send the parameters to user application */
 	error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_get_mapped_offset_t));
+	if (error)
+		error = -EFAULT;
 end_function:
 	dbg("SEP Driver:<-------- sep_get_physical_mapped_offset_handler end\n");
 	return error;
@@ -2070,11 +2098,11 @@
 	error = 0;
 
 	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_init_t));
-
-	dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user \n");
-
-	if (error)
+	if (error) {
+		error = -EFAULT;
 		goto end_function;
+	}
+	dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user\n");
 
 	/* PATCH - configure the DMA to single -burst instead of multi-burst */
 	/*sep_configure_dma_burst(); */
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index 5fe759c..3657e33 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -2,7 +2,8 @@
 	tristate "TV Master TM5600/6000/6010 driver"
 	depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
 	select VIDEO_TUNER
-	select TUNER_XC2028
+	select MEDIA_TUNER_XC2028
+	select MEDIA_TUNER_XC5000
 	select VIDEOBUF_VMALLOC
 	help
 	  Support for TM5600/TM6000/TM6010 USB Device
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index bc89f9d..273e26e 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/slab.h>
 
 #include <asm/delay.h>
 #include <sound/core.h>
@@ -410,5 +411,28 @@
 	snd_card_free(card);
 	return rc;
 }
-EXPORT_SYMBOL_GPL(tm6000_audio_init);
 
+static int tm6000_audio_fini(struct tm6000_core *dev)
+{
+	return 0;
+}
+
+struct tm6000_ops audio_ops = {
+	.id	= TM6000_AUDIO,
+	.name	= "TM6000 Audio Extension",
+	.init	= tm6000_audio_init,
+	.fini	= tm6000_audio_fini,
+};
+
+static int __init tm6000_alsa_register(void)
+{
+	return tm6000_register_extension(&audio_ops);
+}
+
+static void __exit tm6000_alsa_unregister(void)
+{
+	tm6000_unregister_extension(&audio_ops);
+}
+
+module_init(tm6000_alsa_register);
+module_exit(tm6000_alsa_unregister);
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 6143e20..6a9ae40 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -24,6 +24,7 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <linux/version.h>
+#include <linux/slab.h>
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include <media/tvaudio.h>
@@ -363,13 +364,7 @@
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 					0x02, arg);
 		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					TM6000_GPIO_CLK, 0);
-		if (rc < 0)
-			return rc;
-		msleep(10);
-		rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-					TM6000_GPIO_CLK, 1);
+		rc = tm6000_i2c_reset(dev, 10);
 		break;
 	case XC2028_TUNER_RESET:
 		/* Reset codes during load firmware */
@@ -423,14 +418,7 @@
 			break;
 
 		case 2:
-			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-						TM6000_GPIO_CLK, 0);
-			if (rc < 0)
-				return rc;
-			msleep(100);
-			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
-						TM6000_GPIO_CLK, 1);
-			msleep(100);
+			rc = tm6000_i2c_reset(dev, 100);
 			break;
 		}
 	}
@@ -563,7 +551,7 @@
 
 	switch (dev->tuner_type) {
 	case TUNER_XC2028:
-		tun_setup.tuner_callback = tm6000_tuner_callback;;
+		tun_setup.tuner_callback = tm6000_tuner_callback;
 		break;
 	case TUNER_XC5000:
 		tun_setup.tuner_callback = tm6000_xc5000_callback;
@@ -692,6 +680,10 @@
 	if (rc < 0)
 		goto err;
 
+	tm6000_add_into_devlist(dev);
+
+	tm6000_init_extension(dev);
+
 	if (dev->caps.has_dvb) {
 		dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL);
 		if (!dev->dvb) {
@@ -921,6 +913,25 @@
 	}
 #endif
 
+	if (dev->gpio.power_led) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			msleep(15);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			msleep(15);
+			break;
+		}
+	}
 	tm6000_v4l2_unregister(dev);
 
 	tm6000_i2c_unregister(dev);
@@ -931,6 +942,9 @@
 
 	usb_put_dev(dev->udev);
 
+	tm6000_remove_from_devlist(dev);
+	tm6000_close_extension(dev);
+
 	mutex_unlock(&dev->lock);
 	kfree(dev);
 }
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index bfbc53b..c3690e3 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -22,6 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include "tm6000.h"
@@ -153,6 +154,22 @@
 	return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
 }
 
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
+{
+	int rc;
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
+	if (rc < 0)
+		return rc;
+
+	msleep(tsleep);
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
+	msleep(tsleep);
+
+	return rc;
+}
+
 void tm6000_set_fourcc_format(struct tm6000_core *dev)
 {
 	if (dev->dev_type == TM6010) {
@@ -323,6 +340,12 @@
 	tm6000_set_standard (dev, &dev->norm);
 	tm6000_set_audio_bitrate (dev,48000);
 
+	/* switch dvb led off */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x01);
+	}
+
 	return 0;
 }
 
@@ -375,6 +398,13 @@
 		tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
 		msleep(100);
 	}
+
+	/* switch dvb led on */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x00);
+	}
+
 	return 0;
 }
 
@@ -600,3 +630,95 @@
 	return val;
 }
 EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+
+static LIST_HEAD(tm6000_devlist);
+static DEFINE_MUTEX(tm6000_devlist_mutex);
+
+/*
+ * tm6000_realease_resource()
+ */
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_del(&dev->devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+void tm6000_add_into_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_add_tail(&dev->devlist, &tm6000_devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(tm6000_extension_devlist);
+static DEFINE_MUTEX(tm6000_extension_devlist_lock);
+
+int tm6000_register_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	mutex_lock(&tm6000_extension_devlist_lock);
+	list_add_tail(&ops->next, &tm6000_extension_devlist);
+	list_for_each_entry(dev, &tm6000_devlist, devlist) {
+		if (dev)
+			ops->init(dev);
+	}
+	printk(KERN_INFO "tm6000: Initialized (%s) extension\n", ops->name);
+	mutex_unlock(&tm6000_extension_devlist_lock);
+	mutex_unlock(&tm6000_devlist_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(tm6000_register_extension);
+
+void tm6000_unregister_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	list_for_each_entry(dev, &tm6000_devlist, devlist) {
+		if (dev)
+			ops->fini(dev);
+	}
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
+	list_del(&ops->next);
+	mutex_unlock(&tm6000_extension_devlist_lock);
+	mutex_unlock(&tm6000_devlist_mutex);
+}
+EXPORT_SYMBOL(tm6000_unregister_extension);
+
+void tm6000_init_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->init)
+				ops->init(dev);
+		}
+	}
+	mutex_unlock(&tm6000_extension_devlist_lock);
+}
+
+void tm6000_close_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_extension_devlist_lock);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->fini)
+				ops->fini(dev);
+		}
+	}
+	mutex_unlock(&tm6000_extension_devlist_lock);
+}
diff --git a/drivers/staging/tm6000/tm6000-dvb.c b/drivers/staging/tm6000/tm6000-dvb.c
index eafc89c..86c1c8b 100644
--- a/drivers/staging/tm6000/tm6000-dvb.c
+++ b/drivers/staging/tm6000/tm6000-dvb.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/usb.h>
 
 #include "tm6000.h"
@@ -28,6 +29,7 @@
 #include <media/tuner.h>
 
 #include "tuner-xc2028.h"
+#include "xc5000.h"
 
 static void inline print_err_status (struct tm6000_core *dev,
 				     int packet, int status)
@@ -100,7 +102,10 @@
 
 	printk(KERN_INFO "tm6000: got start stream request %s\n",__FUNCTION__);
 
-	tm6000_init_digital_mode(dev);
+	if (dev->mode != TM6000_MODE_DIGITAL) {
+		tm6000_init_digital_mode(dev);
+		dev->mode = TM6000_MODE_DIGITAL;
+	}
 
 	dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if(dvb->bulk_urb == NULL) {
@@ -254,27 +259,55 @@
 	dvb->adapter.priv = dev;
 
 	if (dvb->frontend) {
-		struct xc2028_config cfg = {
-			.i2c_adap = &dev->i2c_adap,
-			.i2c_addr = dev->tuner_addr,
-		};
+		switch (dev->tuner_type) {
+		case TUNER_XC2028: {
+			struct xc2028_config cfg = {
+				.i2c_adap = &dev->i2c_adap,
+				.i2c_addr = dev->tuner_addr,
+			};
 
-		dvb->frontend->callback = tm6000_tuner_callback;
-		ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
-		if (ret < 0) {
-			printk(KERN_ERR
-				"tm6000: couldn't register frontend\n");
-			goto adapter_err;
-		}
+			dvb->frontend->callback = tm6000_tuner_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
 
-		if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
-			printk(KERN_ERR "tm6000: couldn't register "
-					"frontend (xc3028)\n");
-			ret = -EINVAL;
-			goto frontend_err;
+			if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc3028)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
+		case TUNER_XC5000: {
+			struct xc5000_config cfg = {
+				.i2c_address = dev->tuner_addr,
+			};
+
+			dvb->frontend->callback = tm6000_xc5000_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
+
+			if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc5000)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC5000 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
 		}
-		printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
-				 "attached to frontend!\n");
 	} else {
 		printk(KERN_ERR "tm6000: no frontend found\n");
 	}
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index f2b7fe4..56fa371 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -48,7 +48,7 @@
 #define TM6000_MIN_BUF 4
 #define TM6000_DEF_BUF 8
 
-#define TM6000_MAX_ISO_PACKETS	40	/* Max number of ISO packets */
+#define TM6000_MAX_ISO_PACKETS	46	/* Max number of ISO packets */
 
 /* Declare static vars that will be used as parameters */
 static unsigned int vid_limit = 16;	/* Video memory limit, in Mb */
@@ -205,7 +205,11 @@
 		c = (header >> 24) & 0xff;
 
 		/* split the header fields */
-		size  = (((header & 0x7e) << 1) -1) *4;
+		size  = ((header & 0x7e) << 1);
+
+		if (size > 0)
+			size -= 4;
+
 		block = (header >> 7) & 0xf;
 		field = (header >> 11) & 0x1;
 		line  = (header >> 12) & 0x1ff;
@@ -307,10 +311,12 @@
 		case TM6000_URB_MSG_PTS:
 			break;
 		case TM6000_URB_MSG_AUDIO:
-/* Need some code to process audio */
-printk ("%ld: cmd=%s, size=%d\n", jiffies,
+			/* Need some code to process audio */
+			printk ("%ld: cmd=%s, size=%d\n", jiffies,
 				tm6000_msg_type[cmd],size);
 			break;
+		case TM6000_URB_MSG_VBI:
+			break;
 		default:
 			dprintk (dev, V4L2_DEBUG_ISOC, "cmd=%s, size=%d\n",
 						tm6000_msg_type[cmd],size);
@@ -333,14 +339,23 @@
 	return rc;
 }
 
-static int copy_streams(u8 *data, u8 *out_p, unsigned long len,
-			struct urb *urb, struct tm6000_buffer **buf)
+static int copy_streams(u8 *data, unsigned long len,
+			struct urb *urb)
 {
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
 	u8 *ptr=data, *endp=data+len;
 	unsigned long header=0;
 	int rc=0;
+	struct tm6000_buffer *buf;
+	char *outp = NULL;
+
+	get_next_buf(dma_q, &buf);
+	if (buf)
+		outp = videobuf_to_vmalloc(&buf->vb);
+
+	if (!outp)
+		return 0;
 
 	for (ptr=data; ptr<endp;) {
 		if (!dev->isoc_ctl.cmd) {
@@ -388,14 +403,14 @@
 		}
 HEADER:
 		/* Copy or continue last copy */
-		rc=copy_packet(urb,header,&ptr,endp,out_p,buf);
+		rc=copy_packet(urb,header,&ptr,endp,outp,&buf);
 		if (rc<0) {
 			buf=NULL;
 			printk(KERN_ERR "tm6000: buffer underrun at %ld\n",
 					jiffies);
 			return rc;
 		}
-		if (!*buf)
+		if (!buf)
 			return 0;
 	}
 
@@ -404,31 +419,40 @@
 /*
  * Identify the tm5600/6000 buffer header type and properly handles
  */
-static int copy_multiplexed(u8 *ptr, u8 *out_p, unsigned long len,
-			struct urb *urb, struct tm6000_buffer **buf)
+static int copy_multiplexed(u8 *ptr, unsigned long len,
+			struct urb *urb)
 {
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
 	unsigned int pos=dev->isoc_ctl.pos,cpysize;
 	int rc=1;
+	struct tm6000_buffer *buf;
+	char *outp = NULL;
+
+	get_next_buf(dma_q, &buf);
+	if (buf)
+		outp = videobuf_to_vmalloc(&buf->vb);
+
+	if (!outp)
+		return 0;
 
 	while (len>0) {
-		cpysize=min(len,(*buf)->vb.size-pos);
-//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
-		memcpy(&out_p[pos], ptr, cpysize);
+		cpysize=min(len,buf->vb.size-pos);
+		//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos);
+		memcpy(&outp[pos], ptr, cpysize);
 		pos+=cpysize;
 		ptr+=cpysize;
 		len-=cpysize;
-		if (pos >= (*buf)->vb.size) {
+		if (pos >= buf->vb.size) {
 			pos=0;
 			/* Announces that a new buffer were filled */
-			buffer_filled (dev, dma_q, *buf);
+			buffer_filled (dev, dma_q, buf);
 			dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
-			get_next_buf (dma_q, buf);
-			if (!*buf)
+			get_next_buf (dma_q, &buf);
+			if (!buf)
 				break;
-			out_p = videobuf_to_vmalloc(&((*buf)->vb));
-			if (!out_p)
+			outp = videobuf_to_vmalloc(&(buf->vb));
+			if (!outp)
 				return rc;
 			pos = 0;
 		}
@@ -487,52 +511,36 @@
 	struct tm6000_dmaqueue  *dma_q = urb->context;
 	struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq);
 	struct tm6000_buffer *buf;
-	int i, len=0, rc=1;
-	int size;
-	char *outp = NULL, *p;
-	unsigned long copied;
+	int i, len=0, rc=1, status;
+	char *p;
 
-	get_next_buf(dma_q, &buf);
-	if (buf)
-		outp = videobuf_to_vmalloc(&buf->vb);
-
-	if (!outp)
-		return 0;
-
-	size = buf->vb.size;
-
-	copied=0;
-
-	if (urb->status<0) {
-		print_err_status (dev,-1,urb->status);
+	if (urb->status < 0) {
+		print_err_status (dev, -1, urb->status);
 		return 0;
 	}
 
 	for (i = 0; i < urb->number_of_packets; i++) {
-		int status = urb->iso_frame_desc[i].status;
+		status = urb->iso_frame_desc[i].status;
 
 		if (status<0) {
 			print_err_status (dev,i,status);
 			continue;
 		}
 
-		len=urb->iso_frame_desc[i].actual_length;
+		len = urb->iso_frame_desc[i].actual_length;
 
-//		if (len>=TM6000_URB_MSG_LEN) {
-			p=urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		if (len > 0) {
+			p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
 			if (!urb->iso_frame_desc[i].status) {
-				if ((buf->fmt->fourcc)==V4L2_PIX_FMT_TM6000) {
-					rc=copy_multiplexed(p, outp, len, urb, &buf);
+				if ((dev->fourcc)==V4L2_PIX_FMT_TM6000) {
+					rc=copy_multiplexed(p, len, urb);
 					if (rc<=0)
 						return rc;
 				} else {
-					copy_streams(p, outp, len, urb, &buf);
+					copy_streams(p, len, urb);
 				}
 			}
-			copied += len;
-			if (copied >= size || !buf)
-				break;
-//		}
+		}
 	}
 	return rc;
 }
@@ -612,7 +620,7 @@
 static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
 {
 	struct tm6000_dmaqueue *dma_q = &dev->vidq;
-	int i, j, sb_size, pipe, size, max_packets, num_bufs = 5;
+	int i, j, sb_size, pipe, size, max_packets, num_bufs = 8;
 	struct urb *urb;
 
 	/* De-allocates all pending stuff */
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 6812d68..7bbaf26 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -168,6 +168,10 @@
 	struct i2c_adapter		i2c_adap;
 	struct i2c_client		i2c_client;
 
+
+	/* extension */
+	struct list_head		devlist;
+
 	/* video for linux */
 	int				users;
 
@@ -203,6 +207,16 @@
 	spinlock_t                   slock;
 };
 
+#define TM6000_AUDIO 0x10
+
+struct tm6000_ops {
+	struct list_head	next;
+	char			*name;
+	int			id;
+	int (*init)(struct tm6000_core *);
+	int (*fini)(struct tm6000_core *);
+};
+
 struct tm6000_fh {
 	struct tm6000_core           *dev;
 
@@ -232,6 +246,8 @@
 int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
+
 int tm6000_init (struct tm6000_core *dev);
 
 int tm6000_init_analog_mode (struct tm6000_core *dev);
@@ -246,6 +262,13 @@
 int tm6000_v4l2_exit(void);
 void tm6000_set_fourcc_format(struct tm6000_core *dev);
 
+void tm6000_remove_from_devlist(struct tm6000_core *dev);
+void tm6000_add_into_devlist(struct tm6000_core *dev);
+int tm6000_register_extension(struct tm6000_ops *ops);
+void tm6000_unregister_extension(struct tm6000_ops *ops);
+void tm6000_init_extension(struct tm6000_core *dev);
+void tm6000_close_extension(struct tm6000_core *dev);
+
 /* In tm6000-stds.c */
 void tm6000_get_std_res(struct tm6000_core *dev);
 int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm);
@@ -275,7 +298,7 @@
 int tm6000_queue_init(struct tm6000_core *dev);
 
 /* In tm6000-alsa.c */
-int tm6000_audio_init(struct tm6000_core *dev, int idx);
+/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
 
 
 /* Debug stuff */
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 5240816..6a499f0 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -378,47 +378,67 @@
 	complete_and_exit(&ut->thread_done, 0);
 }
 
+static void stop_rx_thread(struct usbip_device *ud)
+{
+	if (ud->tcp_rx.thread != NULL) {
+		send_sig(SIGKILL, ud->tcp_rx.thread, 1);
+		wait_for_completion(&ud->tcp_rx.thread_done);
+		usbip_udbg("rx_thread for ud %p has finished\n", ud);
+	}
+}
+
+static void stop_tx_thread(struct usbip_device *ud)
+{
+	if (ud->tcp_tx.thread != NULL) {
+		send_sig(SIGKILL, ud->tcp_tx.thread, 1);
+		wait_for_completion(&ud->tcp_tx.thread_done);
+		usbip_udbg("tx_thread for ud %p has finished\n", ud);
+	}
+}
+
 int usbip_start_threads(struct usbip_device *ud)
 {
 	/*
 	 * threads are invoked per one device (per one connection).
 	 */
 	struct task_struct *th;
+	int err = 0;
 
 	th = kthread_run(usbip_thread, (void *)&ud->tcp_rx, "usbip");
 	if (IS_ERR(th)) {
 		printk(KERN_WARNING
 			"Unable to start control thread\n");
-		return PTR_ERR(th);
+		err = PTR_ERR(th);
+		goto ust_exit;
 	}
+
 	th = kthread_run(usbip_thread, (void *)&ud->tcp_tx, "usbip");
 	if (IS_ERR(th)) {
 		printk(KERN_WARNING
 			"Unable to start control thread\n");
-		return PTR_ERR(th);
+		err = PTR_ERR(th);
+		goto tx_thread_err;
 	}
 
 	/* confirm threads are starting */
 	wait_for_completion(&ud->tcp_rx.thread_done);
 	wait_for_completion(&ud->tcp_tx.thread_done);
+
 	return 0;
+
+tx_thread_err:
+	stop_rx_thread(ud);
+
+ust_exit:
+	return err;
 }
 EXPORT_SYMBOL_GPL(usbip_start_threads);
 
 void usbip_stop_threads(struct usbip_device *ud)
 {
 	/* kill threads related to this sdev, if v.c. exists */
-	if (ud->tcp_rx.thread != NULL) {
-		send_sig(SIGKILL, ud->tcp_rx.thread, 1);
-		wait_for_completion(&ud->tcp_rx.thread_done);
-		usbip_udbg("rx_thread for ud %p has finished\n", ud);
-	}
-
-	if (ud->tcp_tx.thread != NULL) {
-		send_sig(SIGKILL, ud->tcp_tx.thread, 1);
-		wait_for_completion(&ud->tcp_tx.thread_done);
-		usbip_udbg("tx_thread for ud %p has finished\n", ud);
-	}
+	stop_rx_thread(ud);
+	stop_tx_thread(ud);
 }
 EXPORT_SYMBOL_GPL(usbip_stop_threads);
 
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index 0c82eb4..0f9ea58 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -523,7 +523,7 @@
 	}
 
 	if (image->bus_resource.name == NULL) {
-		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
 		if (image->bus_resource.name == NULL) {
 			dev_err(ca91cx42_bridge->parent, "Unable to allocate "
 				"memory for resource name\n");
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index abe88a3..f09cac1 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -828,7 +828,7 @@
 		return 0;
 
 	if (image->bus_resource.name == NULL) {
-		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_KERNEL);
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
 		if (image->bus_resource.name == NULL) {
 			dev_err(tsi148_bridge->parent, "Unable to allocate "
 				"memory for resource name\n");
diff --git a/drivers/staging/wlags49_h2/Kconfig b/drivers/staging/wlags49_h2/Kconfig
index b6fc2ca..3efcbf8 100644
--- a/drivers/staging/wlags49_h2/Kconfig
+++ b/drivers/staging/wlags49_h2/Kconfig
@@ -1,9 +1,11 @@
 config WLAGS49_H2
 	tristate "Agere Systems HERMES II Wireless PC Card Model 0110"
-	depends on WLAN && WIRELESS_EXT && PCMCIA
+	depends on WLAN && PCMCIA
+	select WIRELESS_EXT
 	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
-	  Driver for wireless cards using Agere's HERMES II chipset
-	  which are identified with Manufacture ID: 0156,0003
-	  The software is a modified version of wl_lkm_722_abg.tar.gz
-	  from the Agere Systems website, addapted for Ubuntu 9.04.
+	Driver for wireless cards using Agere's HERMES II chipset
+	which are identified with Manufacture ID: 0156,0003
+	The software is a modified version of wl_lkm_722_abg.tar.gz
+	from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/wlags49_h2/wl_enc.c b/drivers/staging/wlags49_h2/wl_enc.c
index 48c44c8..26cf548 100644
--- a/drivers/staging/wlags49_h2/wl_enc.c
+++ b/drivers/staging/wlags49_h2/wl_enc.c
@@ -62,6 +62,7 @@
 /*******************************************************************************
  *  include files
  ******************************************************************************/
+#include <linux/string.h>
 #include <wl_version.h>
 
 #include <debug.h>
diff --git a/drivers/staging/wlags49_h2/wl_sysfs.h b/drivers/staging/wlags49_h2/wl_sysfs.h
index 6d96d03..fa658c3 100644
--- a/drivers/staging/wlags49_h2/wl_sysfs.h
+++ b/drivers/staging/wlags49_h2/wl_sysfs.h
@@ -2,6 +2,6 @@
 extern void register_wlags_sysfs(struct net_device *);
 extern void unregister_wlags_sysfs(struct net_device *);
 #else
-static void register_wlags_sysfs(struct net_device *) { return; };
-static void unregister_wlags_sysfs(struct net_device *) { return; };
+static inline void register_wlags_sysfs(struct net_device *net) { }
+static inline void unregister_wlags_sysfs(struct net_device *net) { }
 #endif
diff --git a/drivers/staging/wlags49_h25/Kconfig b/drivers/staging/wlags49_h25/Kconfig
index dcc17092..bf5664a 100644
--- a/drivers/staging/wlags49_h25/Kconfig
+++ b/drivers/staging/wlags49_h25/Kconfig
@@ -1,9 +1,11 @@
 config WLAGS49_H25
 	tristate "Linksys HERMES II.5 WCF54G_Wireless-G_CompactFlash_Card"
-	depends on WLAN && WIRELESS_EXT && PCMCIA
+	depends on WLAN && PCMCIA
+	select WIRELESS_EXT
 	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
-	  Driver for wireless cards using Agere's HERMES II.5 chipset
-	  which are identified with Manufacture ID: 0156,0004
-	  The software is a modified version of wl_lkm_722_abg.tar.gz
-	  from the Agere Systems website, addapted for Ubuntu 9.04.
+	Driver for wireless cards using Agere's HERMES II.5 chipset
+	which are identified with Manufacture ID: 0156,0004
+	The software is a modified version of wl_lkm_722_abg.tar.gz
+	from the Agere Systems website, addapted for Ubuntu 9.04.
diff --git a/drivers/staging/xgifb/Kconfig b/drivers/staging/xgifb/Kconfig
new file mode 100644
index 0000000..bb0ca59
--- /dev/null
+++ b/drivers/staging/xgifb/Kconfig
@@ -0,0 +1,11 @@
+config FB_XGI
+	tristate "XGI display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This driver supports notebooks with XGI Z7,Z9,Z11 PCI chips.
+	  Say Y if you have such a graphics card.
+	  To compile this driver as a module, choose M here: the
+	  module will be called xgifb.ko
diff --git a/drivers/staging/xgifb/Makefile b/drivers/staging/xgifb/Makefile
new file mode 100644
index 0000000..2a31770
--- /dev/null
+++ b/drivers/staging/xgifb/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_FB_XGI)  += xgifb.o
+
+xgifb-objs := XGI_main_26.o XGI_accel.o vb_init.o vb_setmode.o vb_util.o vb_ext.o
+
diff --git a/drivers/staging/xgifb/TODO b/drivers/staging/xgifb/TODO
new file mode 100644
index 0000000..7d71019
--- /dev/null
+++ b/drivers/staging/xgifb/TODO
@@ -0,0 +1,15 @@
+This drivers still need a lot of work. I can list all cleanups to do but it's
+going to be long. So, I'm writing "cleanups" and not the list.
+
+Arnaud
+
+TODO:
+- clean ups
+- fix build warnings when module
+- sort out dup ids with SiS driver
+- remove useless/wrong/unused #ifdef/code/...
+- fix printk usages
+- get rid of non-linux related stuff
+
+Please send patches to:
+Arnaud Patard <apatard@mandriva.com>
diff --git a/drivers/staging/xgifb/XGI.h b/drivers/staging/xgifb/XGI.h
new file mode 100644
index 0000000..87803dd
--- /dev/null
+++ b/drivers/staging/xgifb/XGI.h
@@ -0,0 +1,10 @@
+#ifndef _XGI_H
+#define _XGI_H
+
+#if 1
+#define TWDEBUG(x)
+#else
+#define TWDEBUG(x) printk(KERN_INFO x "\n");
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_accel.c b/drivers/staging/xgifb/XGI_accel.c
new file mode 100644
index 0000000..86ec342
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.c
@@ -0,0 +1,596 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.c which is
+ *     Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.c which is
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author: Thomas Winischhofer <thomas@winischhofer.net>
+ *			(see http://www.winischhofer.net/
+ *			for more information and updates)
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/agp_backend.h>
+
+#include <linux/types.h>
+/*
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <linux/XGIfb.h>
+#else
+#include <video/XGIfb.h>
+#endif
+*/
+#include <asm/io.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include <video/fbcon.h>
+#include <video/fbcon-cfb8.h>
+#include <video/fbcon-cfb16.h>
+#include <video/fbcon-cfb24.h>
+#include <video/fbcon-cfb32.h>
+#endif
+
+#include "osdef.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "XGIfb.h"
+#include "XGI_accel.h"
+
+
+extern struct     video_info xgi_video_info;
+extern int XGIfb_accel;
+
+static const int XGIALUConv[] =
+{
+    0x00,       /* dest = 0;            0,      GXclear,        0 */
+    0x88,       /* dest &= src;         DSa,    GXand,          0x1 */
+    0x44,       /* dest = src & ~dest;  SDna,   GXandReverse,   0x2 */
+    0xCC,       /* dest = src;          S,      GXcopy,         0x3 */
+    0x22,       /* dest &= ~src;        DSna,   GXandInverted,  0x4 */
+    0xAA,       /* dest = dest;         D,      GXnoop,         0x5 */
+    0x66,       /* dest = ^src;         DSx,    GXxor,          0x6 */
+    0xEE,       /* dest |= src;         DSo,    GXor,           0x7 */
+    0x11,       /* dest = ~src & ~dest; DSon,   GXnor,          0x8 */
+    0x99,       /* dest ^= ~src ;       DSxn,   GXequiv,        0x9 */
+    0x55,       /* dest = ~dest;        Dn,     GXInvert,       0xA */
+    0xDD,       /* dest = src|~dest ;   SDno,   GXorReverse,    0xB */
+    0x33,       /* dest = ~src;         Sn,     GXcopyInverted, 0xC */
+    0xBB,       /* dest |= ~src;        DSno,   GXorInverted,   0xD */
+    0x77,       /* dest = ~src|~dest;   DSan,   GXnand,         0xE */
+    0xFF,       /* dest = 0xFF;         1,      GXset,          0xF */
+};
+/* same ROP but with Pattern as Source */
+static const int XGIPatALUConv[] =
+{
+    0x00,       /* dest = 0;            0,      GXclear,        0 */
+    0xA0,       /* dest &= src;         DPa,    GXand,          0x1 */
+    0x50,       /* dest = src & ~dest;  PDna,   GXandReverse,   0x2 */
+    0xF0,       /* dest = src;          P,      GXcopy,         0x3 */
+    0x0A,       /* dest &= ~src;        DPna,   GXandInverted,  0x4 */
+    0xAA,       /* dest = dest;         D,      GXnoop,         0x5 */
+    0x5A,       /* dest = ^src;         DPx,    GXxor,          0x6 */
+    0xFA,       /* dest |= src;         DPo,    GXor,           0x7 */
+    0x05,       /* dest = ~src & ~dest; DPon,   GXnor,          0x8 */
+    0xA5,       /* dest ^= ~src ;       DPxn,   GXequiv,        0x9 */
+    0x55,       /* dest = ~dest;        Dn,     GXInvert,       0xA */
+    0xF5,       /* dest = src|~dest ;   PDno,   GXorReverse,    0xB */
+    0x0F,       /* dest = ~src;         Pn,     GXcopyInverted, 0xC */
+    0xAF,       /* dest |= ~src;        DPno,   GXorInverted,   0xD */
+    0x5F,       /* dest = ~src|~dest;   DPan,   GXnand,         0xE */
+    0xFF,       /* dest = 0xFF;         1,      GXset,          0xF */
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+static const unsigned char myrops[] = {
+   	3, 10, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3
+   };
+#endif
+
+/* 300 series */
+#if 0
+static void
+XGI300Sync(void)
+{
+	XGI300Idle
+}
+#endif
+static void
+XGI310Sync(void)
+{
+	XGI310Idle
+}
+#if 0
+static void
+XGI300SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+                                unsigned int planemask, int trans_color)
+{
+	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI300SetupSRCPitch(xgi_video_info.video_linelength)
+	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+
+	if(trans_color != -1) {
+		XGI300SetupROP(0x0A)
+		XGI300SetupSRCTrans(trans_color)
+		XGI300SetupCMDFlag(TRANSPARENT_BITBLT)
+	} else {
+	        XGI300SetupROP(XGIALUConv[rop])
+	}
+	if(xdir > 0) {
+		XGI300SetupCMDFlag(X_INC)
+	}
+	if(ydir > 0) {
+		XGI300SetupCMDFlag(Y_INC)
+	}
+}
+
+static void
+XGI300SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+                                int width, int height)
+{
+	long srcbase, dstbase;
+
+	srcbase = dstbase = 0;
+	if (src_y >= 2048) {
+		srcbase = xgi_video_info.video_linelength * src_y;
+		src_y = 0;
+	}
+	if (dst_y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * dst_y;
+		dst_y = 0;
+	}
+
+	XGI300SetupSRCBase(srcbase);
+	XGI300SetupDSTBase(dstbase);
+
+	if(!(xgi_video_info.CommandReg & X_INC))  {
+		src_x += width-1;
+		dst_x += width-1;
+	}
+	if(!(xgi_video_info.CommandReg & Y_INC))  {
+		src_y += height-1;
+		dst_y += height-1;
+	}
+	XGI300SetupRect(width, height)
+	XGI300SetupSRCXY(src_x, src_y)
+	XGI300SetupDSTXY(dst_x, dst_y)
+	XGI300DoCMD
+}
+
+static void
+XGI300SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+	XGI300SetupPATFG(color)
+	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI300SetupROP(XGIPatALUConv[rop])
+	XGI300SetupCMDFlag(PATFG)
+}
+
+static void
+XGI300SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+	long dstbase;
+
+	dstbase = 0;
+	if(y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * y;
+		y = 0;
+	}
+	XGI300SetupDSTBase(dstbase)
+	XGI300SetupDSTXY(x,y)
+	XGI300SetupRect(w,h)
+	XGI300SetupCMDFlag(X_INC | Y_INC | BITBLT)
+	XGI300DoCMD
+}
+#endif
+/* 310/325 series ------------------------------------------------ */
+
+static void
+XGI310SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
+                                unsigned int planemask, int trans_color)
+{
+	XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI310SetupSRCPitch(xgi_video_info.video_linelength)
+	XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	if (trans_color != -1) {
+		XGI310SetupROP(0x0A)
+		XGI310SetupSRCTrans(trans_color)
+		XGI310SetupCMDFlag(TRANSPARENT_BITBLT)
+	} else {
+	        XGI310SetupROP(XGIALUConv[rop])
+		/* Set command - not needed, both 0 */
+		/* XGISetupCMDFlag(BITBLT | SRCVIDEO) */
+	}
+	XGI310SetupCMDFlag(xgi_video_info.XGI310_AccelDepth)
+	/* TW: The 310/325 series is smart enough to know the direction */
+}
+
+static void
+XGI310SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
+                                int width, int height)
+{
+	long srcbase, dstbase;
+	int mymin, mymax;
+
+	srcbase = dstbase = 0;
+	mymin = min(src_y, dst_y);
+	mymax = max(src_y, dst_y);
+
+	/* Although the chip knows the direction to use
+	 * if the source and destination areas overlap,
+	 * that logic fails if we fiddle with the bitmap
+	 * addresses. Therefore, we check if the source
+	 * and destination blitting areas overlap and
+	 * adapt the bitmap addresses synchronously
+	 * if the coordinates exceed the valid range.
+	 * The the areas do not overlap, we do our
+	 * normal check.
+	 */
+	if((mymax - mymin) < height) {
+	   if((src_y >= 2048) || (dst_y >= 2048)) {
+	      srcbase = xgi_video_info.video_linelength * mymin;
+	      dstbase = xgi_video_info.video_linelength * mymin;
+	      src_y -= mymin;
+	      dst_y -= mymin;
+	   }
+	} else {
+	   if(src_y >= 2048) {
+	      srcbase = xgi_video_info.video_linelength * src_y;
+	      src_y = 0;
+	   }
+	   if(dst_y >= 2048) {
+	      dstbase = xgi_video_info.video_linelength * dst_y;
+	      dst_y = 0;
+	   }
+	}
+
+	XGI310SetupSRCBase(srcbase);
+	XGI310SetupDSTBase(dstbase);
+	XGI310SetupRect(width, height)
+	XGI310SetupSRCXY(src_x, src_y)
+	XGI310SetupDSTXY(dst_x, dst_y)
+	XGI310DoCMD
+}
+
+static void
+XGI310SetupForSolidFill(int color, int rop, unsigned int planemask)
+{
+	XGI310SetupPATFG(color)
+	XGI310SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
+	XGI310SetupDSTColorDepth(xgi_video_info.DstColor);
+	XGI310SetupROP(XGIPatALUConv[rop])
+	XGI310SetupCMDFlag(PATFG | xgi_video_info.XGI310_AccelDepth)
+}
+
+static void
+XGI310SubsequentSolidFillRect(int x, int y, int w, int h)
+{
+	long dstbase;
+
+	dstbase = 0;
+	if(y >= 2048) {
+		dstbase = xgi_video_info.video_linelength * y;
+		y = 0;
+	}
+	XGI310SetupDSTBase(dstbase)
+	XGI310SetupDSTXY(x,y)
+	XGI310SetupRect(w,h)
+	XGI310SetupCMDFlag(BITBLT)
+	XGI310DoCMD
+}
+
+/* --------------------------------------------------------------------- */
+
+/* The exported routines */
+
+int XGIfb_initaccel(void)
+{
+#ifdef XGIFB_USE_SPINLOCKS
+    spin_lock_init(&xgi_video_info.lockaccel);
+#endif
+    return(0);
+}
+
+void XGIfb_syncaccel(void)
+{
+
+    XGI310Sync();
+
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)  /* --- KERNEL 2.5.34 and later --- */
+
+int fbcon_XGI_sync(struct fb_info *info)
+{
+    if(!XGIfb_accel) return 0;
+    CRITFLAGS
+
+    XGI310Sync();
+
+   CRITEND
+   return 0;
+}
+
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+   int col=0;
+   CRITFLAGS
+
+
+   if(!rect->width || !rect->height)
+   	return;
+
+   if(!XGIfb_accel) {
+	cfb_fillrect(info, rect);
+	return;
+   }
+
+   switch(info->var.bits_per_pixel) {
+		case 8: col = rect->color;
+			break;
+		case 16: col = ((u32 *)(info->pseudo_palette))[rect->color];
+			 break;
+		case 32: col = ((u32 *)(info->pseudo_palette))[rect->color];
+			 break;
+	}
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(col, myrops[rect->rop], 0);
+	   XGI310SubsequentSolidFillRect(rect->dx, rect->dy, rect->width, rect->height);
+	   CRITEND
+	   XGI310Sync();
+
+
+}
+
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+   int xdir, ydir;
+   CRITFLAGS
+
+
+   if(!XGIfb_accel) {
+   	cfb_copyarea(info, area);
+	return;
+   }
+
+   if(!area->width || !area->height)
+   	return;
+
+   if(area->sx < area->dx) xdir = 0;
+   else                    xdir = 1;
+   if(area->sy < area->dy) ydir = 0;
+   else                    ydir = 1;
+
+      CRITBEGIN
+      XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+      XGI310SubsequentScreenToScreenCopy(area->sx, area->sy, area->dx, area->dy, area->width, area->height);
+      CRITEND
+      XGI310Sync();
+
+}
+
+#endif
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)  /* ------ KERNEL <2.5.34 ------ */
+
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx,
+			    int dsty, int dstx, int height, int width)
+{
+        int xdir, ydir;
+	CRITFLAGS
+
+	if(!xgi_video_info.accel) {
+	    switch(xgi_video_info.video_bpp) {
+	    case 8:
+#ifdef FBCON_HAS_CFB8
+	       fbcon_cfb8_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+	    case 16:
+#ifdef FBCON_HAS_CFB16
+	       fbcon_cfb16_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+	    case 32:
+#ifdef FBCON_HAS_CFB32
+	       fbcon_cfb32_bmove(p, srcy, srcx, dsty, dstx, height, width);
+#endif
+	       break;
+            }
+	    return;
+	}
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+	dstx *= fontwidth(p);
+	dsty *= fontheight(p);
+	width *= fontwidth(p);
+	height *= fontheight(p);
+
+	if(srcx < dstx) xdir = 0;
+	else            xdir = 1;
+	if(srcy < dsty) ydir = 0;
+	else            ydir = 1;
+
+
+	   CRITBEGIN
+	   XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
+	   XGI310SubsequentScreenToScreenCopy(srcx, srcy, dstx, dsty, width, height);
+	   CRITEND
+	   XGI310Sync();
+#if 0
+	   printk(KERN_INFO "XGI_bmove sx %d sy %d dx %d dy %d w %d h %d\n",
+		srcx, srcy, dstx, dsty, width, height);
+#endif
+
+}
+
+
+static void fbcon_XGI_clear(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width, int color)
+{
+	CRITFLAGS
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+	width *= fontwidth(p);
+	height *= fontheight(p);
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(color, 3, 0);
+	   XGI310SubsequentSolidFillRect(srcx, srcy, width, height);
+	   CRITEND
+	   XGI310Sync();
+
+}
+
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB8
+	    fbcon_cfb8_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = attr_bgcol_ec(p, conp);
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB16
+	    fbcon_cfb16_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = ((u_int16_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p,
+			int srcy, int srcx, int height, int width)
+{
+	u32 bgx;
+
+	if(!xgi_video_info.accel) {
+#ifdef FBCON_HAS_CFB32
+	    fbcon_cfb32_clear(conp, p, srcy, srcx, height, width);
+#endif
+	    return;
+	}
+
+	bgx = ((u_int32_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
+	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
+}
+
+void fbcon_XGI_revc(struct display *p, int srcx, int srcy)
+{
+	CRITFLAGS
+
+	if(!xgi_video_info.accel) {
+	    switch(xgi_video_info.video_bpp) {
+	    case 16:
+#ifdef FBCON_HAS_CFB16
+	       fbcon_cfb16_revc(p, srcx, srcy);
+#endif
+	       break;
+	    case 32:
+#ifdef FBCON_HAS_CFB32
+	       fbcon_cfb32_revc(p, srcx, srcy);
+#endif
+	       break;
+            }
+	    return;
+	}
+
+	srcx *= fontwidth(p);
+	srcy *= fontheight(p);
+
+
+	   CRITBEGIN
+	   XGI310SetupForSolidFill(0, 0x0a, 0);
+	   XGI310SubsequentSolidFillRect(srcx, srcy, fontwidth(p), fontheight(p));
+	   CRITEND
+	   XGI310Sync();
+
+}
+
+#ifdef FBCON_HAS_CFB8
+struct display_switch fbcon_XGI8 = {
+	setup:			fbcon_cfb8_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear8,
+	putc:			fbcon_cfb8_putc,
+	putcs:			fbcon_cfb8_putcs,
+	revc:			fbcon_cfb8_revc,
+	clear_margins:		fbcon_cfb8_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB16
+struct display_switch fbcon_XGI16 = {
+	setup:			fbcon_cfb16_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear16,
+	putc:			fbcon_cfb16_putc,
+	putcs:			fbcon_cfb16_putcs,
+	revc:			fbcon_XGI_revc,
+	clear_margins:		fbcon_cfb16_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+#ifdef FBCON_HAS_CFB32
+struct display_switch fbcon_XGI32 = {
+	setup:			fbcon_cfb32_setup,
+	bmove:			fbcon_XGI_bmove,
+	clear:			fbcon_XGI_clear32,
+	putc:			fbcon_cfb32_putc,
+	putcs:			fbcon_cfb32_putcs,
+	revc:			fbcon_XGI_revc,
+	clear_margins:		fbcon_cfb32_clear_margins,
+	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
+};
+#endif
+
+#endif /* KERNEL VERSION */
+
+
diff --git a/drivers/staging/xgifb/XGI_accel.h b/drivers/staging/xgifb/XGI_accel.h
new file mode 100644
index 0000000..04e1267
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_accel.h
@@ -0,0 +1,511 @@
+/*
+ * XGI 300/630/730/540/315/550/650/740 frame buffer driver
+ * for Linux kernels 2.4.x and 2.5.x
+ *
+ * 2D acceleration part
+ *
+ * Based on the X driver's XGI300_accel.h which is
+ *     Copyright Xavier Ducoin <x.ducoin@lectra.com>
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ * and XGI310_accel.h which is
+ *     Copyright 2002 by Thomas Winischhofer, Vienna, Austria
+ *
+ * Author:   Thomas Winischhofer <thomas@winischhofer.net>:
+ *			(see http://www.winischhofer.net/
+ *			for more information and updates)
+ */
+
+#ifndef _XGIFB_ACCEL_H
+#define _XGIFB_ACCEL_H
+
+/* Guard accelerator accesses with spin_lock_irqsave? Works well without. */
+#undef XGIFB_USE_SPINLOCKS
+
+#ifdef XGIFB_USE_SPINLOCKS
+#include <linux/spinlock.h>
+#define CRITBEGIN  spin_lock_irqsave(&xgi_video_info.lockaccel), critflags);
+#define CRITEND	   spin_unlock_irqrestore(&xgi_video_info.lockaccel), critflags);
+#define CRITFLAGS  unsigned long critflags;
+#else
+#define CRITBEGIN
+#define CRITEND
+#define CRITFLAGS
+#endif
+
+/* Definitions for the XGI engine communication. */
+
+#define PATREGSIZE      384  /* Pattern register size. 384 bytes @ 0x8300 */
+#define BR(x)   (0x8200 | (x) << 2)
+#define PBR(x)  (0x8300 | (x) << 2)
+
+/* XGI300 engine commands */
+#define BITBLT                  0x00000000  /* Blit */
+#define COLOREXP                0x00000001  /* Color expand */
+#define ENCOLOREXP              0x00000002  /* Enhanced color expand */
+#define MULTIPLE_SCANLINE       0x00000003  /* ? */
+#define LINE                    0x00000004  /* Draw line */
+#define TRAPAZOID_FILL          0x00000005  /* Fill trapezoid */
+#define TRANSPARENT_BITBLT      0x00000006  /* Transparent Blit */
+
+/* Additional engine commands for 310/325 */
+#define ALPHA_BLEND		0x00000007  /* Alpha blend ? */
+#define A3D_FUNCTION		0x00000008  /* 3D command ? */
+#define	CLEAR_Z_BUFFER		0x00000009  /* ? */
+#define GRADIENT_FILL		0x0000000A  /* Gradient fill */
+#define STRETCH_BITBLT		0x0000000B  /* Stretched Blit */
+
+/* source select */
+#define SRCVIDEO                0x00000000  /* source is video RAM */
+#define SRCSYSTEM               0x00000010  /* source is system memory */
+#define SRCCPUBLITBUF           SRCSYSTEM   /* source is CPU-driven BitBuffer (for color expand) */
+#define SRCAGP                  0x00000020  /* source is AGP memory (?) */
+
+/* Pattern flags */
+#define PATFG                   0x00000000  /* foreground color */
+#define PATPATREG               0x00000040  /* pattern in pattern buffer (0x8300) */
+#define PATMONO                 0x00000080  /* mono pattern */
+
+/* blitting direction (300 series only) */
+#define X_INC                   0x00010000
+#define X_DEC                   0x00000000
+#define Y_INC                   0x00020000
+#define Y_DEC                   0x00000000
+
+/* Clipping flags */
+#define NOCLIP                  0x00000000
+#define NOMERGECLIP             0x04000000
+#define CLIPENABLE              0x00040000
+#define CLIPWITHOUTMERGE        0x04040000
+
+/* Transparency */
+#define OPAQUE                  0x00000000
+#define TRANSPARENT             0x00100000
+
+/* ? */
+#define DSTAGP                  0x02000000
+#define DSTVIDEO                0x02000000
+
+/* Line */
+#define LINE_STYLE              0x00800000
+#define NO_RESET_COUNTER        0x00400000
+#define NO_LAST_PIXEL           0x00200000
+
+/* Subfunctions for Color/Enhanced Color Expansion (310/325 only) */
+#define COLOR_TO_MONO		0x00100000
+#define AA_TEXT			0x00200000
+
+/* Some general registers for 310/325 series */
+#define SRC_ADDR		0x8200
+#define SRC_PITCH		0x8204
+#define AGP_BASE		0x8206 /* color-depth dependent value */
+#define SRC_Y			0x8208
+#define SRC_X			0x820A
+#define DST_Y			0x820C
+#define DST_X			0x820E
+#define DST_ADDR		0x8210
+#define DST_PITCH		0x8214
+#define DST_HEIGHT		0x8216
+#define RECT_WIDTH		0x8218
+#define RECT_HEIGHT		0x821A
+#define PAT_FGCOLOR		0x821C
+#define PAT_BGCOLOR		0x8220
+#define SRC_FGCOLOR		0x8224
+#define SRC_BGCOLOR		0x8228
+#define MONO_MASK		0x822C
+#define LEFT_CLIP		0x8234
+#define TOP_CLIP		0x8236
+#define RIGHT_CLIP		0x8238
+#define BOTTOM_CLIP		0x823A
+#define COMMAND_READY		0x823C
+#define FIRE_TRIGGER      	0x8240
+
+#define PATTERN_REG		0x8300  /* 384 bytes pattern buffer */
+
+/* Line registers */
+#define LINE_X0			SRC_Y
+#define LINE_X1			DST_Y
+#define LINE_Y0			SRC_X
+#define LINE_Y1			DST_X
+#define LINE_COUNT		RECT_WIDTH
+#define LINE_STYLE_PERIOD	RECT_HEIGHT
+#define LINE_STYLE_0		MONO_MASK
+#define LINE_STYLE_1		0x8230
+#define LINE_XN			PATTERN_REG
+#define LINE_YN			PATTERN_REG+2
+
+/* Transparent bitblit registers */
+#define TRANS_DST_KEY_HIGH	PAT_FGCOLOR
+#define TRANS_DST_KEY_LOW	PAT_BGCOLOR
+#define TRANS_SRC_KEY_HIGH	SRC_FGCOLOR
+#define TRANS_SRC_KEY_LOW	SRC_BGCOLOR
+
+/* Queue */
+#define Q_BASE_ADDR		0x85C0  /* Base address of software queue (?) */
+#define Q_WRITE_PTR		0x85C4  /* Current write pointer (?) */
+#define Q_READ_PTR		0x85C8  /* Current read pointer (?) */
+#define Q_STATUS		0x85CC  /* queue status */
+
+
+#define MMIO_IN8(base, offset) \
+	*(volatile u8 *)(((u8*)(base)) + (offset))
+#define MMIO_IN16(base, offset) \
+	*(volatile u16 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_IN32(base, offset) \
+	*(volatile u32 *)(void *)(((u8*)(base)) + (offset))
+#define MMIO_OUT8(base, offset, val) \
+	*(volatile u8 *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT16(base, offset, val) \
+	*(volatile u16 *)(void *)(((u8*)(base)) + (offset)) = (val)
+#define MMIO_OUT32(base, offset, val) \
+	*(volatile u32 *)(void *)(((u8*)(base)) + (offset)) = (val)
+
+
+
+/* ------------- XGI 300 series -------------- */
+
+/* Macros to do useful things with the XGI BitBLT engine */
+
+/* BR(16) (0x8420):
+
+   bit 31 2D engine: 1 is idle,
+   bit 30 3D engine: 1 is idle,
+   bit 29 Command queue: 1 is empty
+
+   bits 28:24: Current CPU driven BitBlt buffer stage bit[4:0]
+
+   bits 15:0:  Current command queue length
+
+*/
+
+/* TW: BR(16)+2 = 0x8242 */
+
+int     xgiCmdQueLen;
+
+#define XGI300Idle \
+  { \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, BR(16)+2) & 0xE000) != 0xE000){}; \
+  xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, 0x8240); \
+  }
+/* TW: (do three times, because 2D engine seems quite unsure about whether or not it's idle) */
+
+#define XGI300SetupSRCBase(base) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(0), base);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCPitch(pitch) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1), pitch);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCXY(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (x)<<16 | (y) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTBase(base) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(4), base);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTXY(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (x)<<16 | (y) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTRect(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(5), (y)<<16 | (x) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupDSTColorDepth(bpp) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(1)+2, bpp);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupRect(w,h) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(6), (h)<<16 | (w) );\
+                xgiCmdQueLen --;
+
+#define XGI300SetupPATFG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(7), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupPATBG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(8), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCFG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(9), color);\
+                xgiCmdQueLen --;
+
+#define XGI300SetupSRCBG(color) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(10), color);\
+                xgiCmdQueLen --;
+
+/* 0x8224 src colorkey high */
+/* 0x8228 src colorkey low */
+/* 0x821c dest colorkey high */
+/* 0x8220 dest colorkey low */
+#define XGI300SetupSRCTrans(color) \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8224, color);\
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8228, color);\
+		xgiCmdQueLen -= 2;
+
+#define XGI300SetupDSTTrans(color) \
+		if (xgiCmdQueLen <= 1)  XGI300Idle;\
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x821C, color); \
+		MMIO_OUT32(xgi_video_info.mmio_vbase, 0x8220, color); \
+                xgiCmdQueLen -= 2;
+
+#define XGI300SetupMONOPAT(p0,p1) \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), p0);\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), p1);\
+                xgiCmdQueLen -= 2;
+
+#define XGI300SetupClipLT(left,top) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(13), ((left) & 0xFFFF) | (top)<<16 );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupClipRB(right,bottom) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(14), ((right) & 0xFFFF) | (bottom)<<16 );\
+                xgiCmdQueLen--;
+
+/* General */
+#define XGI300SetupROP(rop) \
+                xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI300SetupCMDFlag(flags) \
+                xgi_video_info.CommandReg |= (flags);
+
+#define XGI300DoCMD \
+                if (xgiCmdQueLen <= 1)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(15), xgi_video_info.CommandReg); \
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(16), 0);\
+                xgiCmdQueLen -= 2;
+
+/* Line */
+#define XGI300SetupX0Y0(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(2), (y)<<16 | (x) );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupX1Y1(x,y) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(3), (y)<<16 | (x) );\
+                xgiCmdQueLen--;
+
+#define XGI300SetupLineCount(c) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6), c);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStylePeriod(p) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT16(xgi_video_info.mmio_vbase, BR(6)+2, p);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStyleLow(ls) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(11), ls);\
+                xgiCmdQueLen--;
+
+#define XGI300SetupStyleHigh(ls) \
+                if (xgiCmdQueLen <= 0)  XGI300Idle;\
+                MMIO_OUT32(xgi_video_info.mmio_vbase, BR(12), ls);\
+                xgiCmdQueLen--;
+
+
+
+/* ----------- XGI 310/325 series --------------- */
+
+/* Q_STATUS:
+   bit 31 = 1: All engines idle and all queues empty
+   bit 30 = 1: Hardware Queue (=HW CQ, 2D queue, 3D queue) empty
+   bit 29 = 1: 2D engine is idle
+   bit 28 = 1: 3D engine is idle
+   bit 27 = 1: HW command queue empty
+   bit 26 = 1: 2D queue empty
+   bit 25 = 1: 3D queue empty
+   bit 24 = 1: SW command queue empty
+   bits 23:16: 2D counter 3
+   bits 15:8:  2D counter 2
+   bits 7:0:   2D counter 1
+
+   Where is the command queue length (current amount of commands the queue
+   can accept) on the 310/325 series? (The current implementation is taken
+   from 300 series and certainly wrong...)
+*/
+
+/* TW: FIXME: xgiCmdQueLen is... where....? */
+#define XGI310Idle \
+  { \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+  while( (MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS+2) & 0x8000) != 0x8000){}; \
+  xgiCmdQueLen=MMIO_IN16(xgi_video_info.mmio_vbase, Q_STATUS); \
+  }
+
+#define XGI310SetupSRCBase(base) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_ADDR, base);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCPitch(pitch) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, SRC_PITCH, pitch);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCXY(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_Y, (x)<<16 | (y) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTBase(base) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_ADDR, base);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTXY(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_Y, (x)<<16 | (y) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTRect(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, DST_PITCH, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupDSTColorDepth(bpp) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, AGP_BASE, bpp);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupRect(w,h) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, RECT_WIDTH, (h)<<16 | (w) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupPATFG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_FGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupPATBG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, PAT_BGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCFG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_FGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCBG(color) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, SRC_BGCOLOR, color);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupSRCTrans(color) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_HIGH, color);\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_SRC_KEY_LOW, color);\
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupDSTTrans(color) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_HIGH, color); \
+      MMIO_OUT32(xgi_video_info.mmio_vbase, TRANS_DST_KEY_LOW, color); \
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupMONOPAT(p0,p1) \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK, p0);\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, MONO_MASK+4, p1);\
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupClipLT(left,top) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LEFT_CLIP, ((left) & 0xFFFF) | (top)<<16 );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupClipRB(right,bottom) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, RIGHT_CLIP, ((right) & 0xFFFF) | (bottom)<<16 );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupROP(rop) \
+      xgi_video_info.CommandReg = (rop) << 8;
+
+#define XGI310SetupCMDFlag(flags) \
+      xgi_video_info.CommandReg |= (flags);
+
+#define XGI310DoCMD \
+      if (xgiCmdQueLen <= 1)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, COMMAND_READY, xgi_video_info.CommandReg); \
+      MMIO_OUT32(xgi_video_info.mmio_vbase, FIRE_TRIGGER, 0); \
+      xgiCmdQueLen -= 2;
+
+#define XGI310SetupX0Y0(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X0, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupX1Y1(x,y) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_X1, (y)<<16 | (x) );\
+      xgiCmdQueLen--;
+
+#define XGI310SetupLineCount(c) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_COUNT, c);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStylePeriod(p) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT16(xgi_video_info.mmio_vbase, LINE_STYLE_PERIOD, p);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStyleLow(ls) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_0, ls);\
+      xgiCmdQueLen--;
+
+#define XGI310SetupStyleHigh(ls) \
+      if (xgiCmdQueLen <= 0)  XGI310Idle;\
+      MMIO_OUT32(xgi_video_info.mmio_vbase, LINE_STYLE_1, ls);\
+      xgiCmdQueLen--;
+
+int  XGIfb_initaccel(void);
+void XGIfb_syncaccel(void);
+
+extern struct video_info xgi_video_info;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)
+void fbcon_XGI_bmove(struct display *p, int srcy, int srcx, int dsty,
+                     int dstx, int height, int width);
+void fbcon_XGI_revc(struct display *p, int srcy, int srcx);
+void fbcon_XGI_clear8(struct vc_data *conp, struct display *p, int srcy,
+                      int srcx, int height, int width);
+void fbcon_XGI_clear16(struct vc_data *conp, struct display *p, int srcy,
+                       int srcx, int height, int width);
+void fbcon_XGI_clear32(struct vc_data *conp, struct display *p, int srcy,
+                       int srcx, int height, int width);
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
+extern int XGIfb_accel;
+void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+#endif
+
+#endif
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
new file mode 100644
index 0000000..4f4171e
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -0,0 +1,1023 @@
+#ifndef _XGIFB_MAIN
+#define _XGIFB_MAIN
+
+
+/* ------------------- Constant Definitions ------------------------- */
+
+
+#include "XGIfb.h"
+#include "vb_struct.h"
+#include "vb_def.h"
+
+//#define LINUXBIOS   /* turn this on when compiling for LINUXBIOS */
+#define AGPOFF     /* default is turn off AGP */
+
+#define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while(0)
+
+#define VER_MAJOR                 0
+#define VER_MINOR                 8
+#define VER_LEVEL                 1
+
+#define DRIVER_DESC  "XGI Volari Frame Buffer Module Version 0.8.1"
+
+#ifndef PCI_VENDOR_ID_XG
+#define PCI_VENDOR_ID_XG          0x18CA
+#endif
+
+#ifndef PCI_DEVICE_ID_XG_40
+#define PCI_DEVICE_ID_XG_40      0x040
+#endif
+#ifndef PCI_DEVICE_ID_XG_41
+#define PCI_DEVICE_ID_XG_41      0x041
+#endif
+#ifndef PCI_DEVICE_ID_XG_42
+#define PCI_DEVICE_ID_XG_42      0x042
+#endif
+#ifndef PCI_DEVICE_ID_XG_20
+#define PCI_DEVICE_ID_XG_20      0x020
+#endif
+#ifndef PCI_DEVICE_ID_XG_27
+#define PCI_DEVICE_ID_XG_27      0x027
+#endif
+
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#define XGI_IOTYPE1 void __iomem
+#define XGI_IOTYPE2 __iomem
+#define XGIINITSTATIC static
+#else
+#define XGI_IOTYPE1 unsigned char
+#define XGI_IOTYPE2
+#define XGIINITSTATIC
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct pci_device_id __devinitdata xgifb_pci_table[] = {
+
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_27, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_40, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
+#endif
+/* To be included in fb.h */
+#ifndef FB_ACCEL_XGI_GLAMOUR_2
+#define FB_ACCEL_XGI_GLAMOUR_2  40	/* XGI 315, 650, 740		*/
+#endif
+#ifndef FB_ACCEL_XGI_XABRE
+#define FB_ACCEL_XGI_XABRE      41	/* XGI 330 ("Xabre")		*/
+#endif
+
+#define MAX_ROM_SCAN              0x10000
+
+#define HW_CURSOR_CAP             0x80
+#define TURBO_QUEUE_CAP           0x40
+#define AGP_CMD_QUEUE_CAP         0x20
+#define VM_CMD_QUEUE_CAP          0x10
+#define MMIO_CMD_QUEUE_CAP        0x08
+
+
+
+/* For 315 series */
+
+#define COMMAND_QUEUE_AREA_SIZE   0x80000 /* 512K */
+#define COMMAND_QUEUE_THRESHOLD   0x1F
+
+
+/* TW */
+#define HW_CURSOR_AREA_SIZE_315   0x4000  /* 16K */
+#define HW_CURSOR_AREA_SIZE_300   0x1000  /* 4K */
+
+#define OH_ALLOC_SIZE             4000
+#define SENTINEL                  0x7fffffff
+
+#define SEQ_ADR                   0x14
+#define SEQ_DATA                  0x15
+#define DAC_ADR                   0x18
+#define DAC_DATA                  0x19
+#define CRTC_ADR                  0x24
+#define CRTC_DATA                 0x25
+#define DAC2_ADR                  (0x16-0x30)
+#define DAC2_DATA                 (0x17-0x30)
+#define VB_PART1_ADR              (0x04-0x30)
+#define VB_PART1_DATA             (0x05-0x30)
+#define VB_PART2_ADR              (0x10-0x30)
+#define VB_PART2_DATA             (0x11-0x30)
+#define VB_PART3_ADR              (0x12-0x30)
+#define VB_PART3_DATA             (0x13-0x30)
+#define VB_PART4_ADR              (0x14-0x30)
+#define VB_PART4_DATA             (0x15-0x30)
+
+#define XGISR			  XGI_Pr.P3c4
+#define XGICR                     XGI_Pr.P3d4
+#define XGIDACA                   XGI_Pr.P3c8
+#define XGIDACD                   XGI_Pr.P3c9
+#define XGIPART1                  XGI_Pr.Part1Port
+#define XGIPART2                  XGI_Pr.Part2Port
+#define XGIPART3                  XGI_Pr.Part3Port
+#define XGIPART4                  XGI_Pr.Part4Port
+#define XGIPART5                  XGI_Pr.Part5Port
+#define XGIDAC2A                  XGIPART5
+#define XGIDAC2D                  (XGIPART5 + 1)
+#define XGIMISCR                  (XGI_Pr.RelIO + 0x1c)
+#define XGIINPSTAT		  (XGI_Pr.RelIO + 0x2a)
+
+#define IND_XGI_PASSWORD          0x05  /* SRs */
+#define IND_XGI_COLOR_MODE        0x06
+#define IND_XGI_RAMDAC_CONTROL    0x07
+#define IND_XGI_DRAM_SIZE         0x14
+#define IND_XGI_SCRATCH_REG_16    0x16
+#define IND_XGI_SCRATCH_REG_17    0x17
+#define IND_XGI_SCRATCH_REG_1A    0x1A
+#define IND_XGI_MODULE_ENABLE     0x1E
+#define IND_XGI_PCI_ADDRESS_SET   0x20
+#define IND_XGI_TURBOQUEUE_ADR    0x26
+#define IND_XGI_TURBOQUEUE_SET    0x27
+#define IND_XGI_POWER_ON_TRAP     0x38
+#define IND_XGI_POWER_ON_TRAP2    0x39
+#define IND_XGI_CMDQUEUE_SET      0x26
+#define IND_XGI_CMDQUEUE_THRESHOLD  0x27
+
+#define IND_XGI_SCRATCH_REG_CR30  0x30  /* CRs */
+#define IND_XGI_SCRATCH_REG_CR31  0x31
+#define IND_XGI_SCRATCH_REG_CR32  0x32
+#define IND_XGI_SCRATCH_REG_CR33  0x33
+#define IND_XGI_LCD_PANEL         0x36
+#define IND_XGI_SCRATCH_REG_CR37  0x37
+#define IND_XGI_AGP_IO_PAD        0x48
+
+#define IND_BRI_DRAM_STATUS       0x63 /* PCI config memory size offset */
+
+#define MMIO_QUEUE_PHYBASE        0x85C0
+#define MMIO_QUEUE_WRITEPORT      0x85C4
+#define MMIO_QUEUE_READPORT       0x85C8
+
+#define IND_XGI_CRT2_WRITE_ENABLE_300 0x24
+#define IND_XGI_CRT2_WRITE_ENABLE_315 0x2F
+
+#define XGI_PASSWORD              0x86  /* SR05 */
+#define XGI_INTERLACED_MODE       0x20  /* SR06 */
+#define XGI_8BPP_COLOR_MODE       0x0
+#define XGI_15BPP_COLOR_MODE      0x1
+#define XGI_16BPP_COLOR_MODE      0x2
+#define XGI_32BPP_COLOR_MODE      0x4
+
+#define XGI_DRAM_SIZE_MASK     0xF0  /*SR14 */
+#define XGI_DRAM_SIZE_1MB      0x00
+#define XGI_DRAM_SIZE_2MB      0x01
+#define XGI_DRAM_SIZE_4MB      0x02
+#define XGI_DRAM_SIZE_8MB      0x03
+#define XGI_DRAM_SIZE_16MB     0x04
+#define XGI_DRAM_SIZE_32MB     0x05
+#define XGI_DRAM_SIZE_64MB     0x06
+#define XGI_DRAM_SIZE_128MB    0x07
+#define XGI_DRAM_SIZE_256MB    0x08
+#define XGI_DATA_BUS_MASK      0x02
+#define XGI_DATA_BUS_64        0x00
+#define XGI_DATA_BUS_128       0x01
+#define XGI_DUAL_CHANNEL_MASK  0x0C
+#define XGI_SINGLE_CHANNEL_1_RANK  	0x0
+#define XGI_SINGLE_CHANNEL_2_RANK  	0x1
+#define XGI_ASYM_DDR		  	0x02
+#define XGI_DUAL_CHANNEL_1_RANK    	0x3
+
+#define XGI550_DRAM_SIZE_MASK     0x3F  /* 550/650/740 SR14 */
+#define XGI550_DRAM_SIZE_4MB      0x00
+#define XGI550_DRAM_SIZE_8MB      0x01
+#define XGI550_DRAM_SIZE_16MB     0x03
+#define XGI550_DRAM_SIZE_24MB     0x05
+#define XGI550_DRAM_SIZE_32MB     0x07
+#define XGI550_DRAM_SIZE_64MB     0x0F
+#define XGI550_DRAM_SIZE_96MB     0x17
+#define XGI550_DRAM_SIZE_128MB    0x1F
+#define XGI550_DRAM_SIZE_256MB    0x3F
+
+#define XGI_SCRATCH_REG_1A_MASK   0x10
+
+#define XGI_ENABLE_2D             0x40  /* SR1E */
+
+#define XGI_MEM_MAP_IO_ENABLE     0x01  /* SR20 */
+#define XGI_PCI_ADDR_ENABLE       0x80
+
+#define XGI_AGP_CMDQUEUE_ENABLE   0x80  /* 315/650/740 SR26 */
+#define XGI_VRAM_CMDQUEUE_ENABLE  0x40
+#define XGI_MMIO_CMD_ENABLE       0x20
+#define XGI_CMD_QUEUE_SIZE_512k   0x00
+#define XGI_CMD_QUEUE_SIZE_1M     0x04
+#define XGI_CMD_QUEUE_SIZE_2M     0x08
+#define XGI_CMD_QUEUE_SIZE_4M     0x0C
+#define XGI_CMD_QUEUE_RESET       0x01
+#define XGI_CMD_AUTO_CORR	  0x02
+
+#define XGI_SIMULTANEOUS_VIEW_ENABLE  0x01  /* CR30 */
+#define XGI_MODE_SELECT_CRT2      0x02
+#define XGI_VB_OUTPUT_COMPOSITE   0x04
+#define XGI_VB_OUTPUT_SVIDEO      0x08
+#define XGI_VB_OUTPUT_SCART       0x10
+#define XGI_VB_OUTPUT_LCD         0x20
+#define XGI_VB_OUTPUT_CRT2        0x40
+#define XGI_VB_OUTPUT_HIVISION    0x80
+
+#define XGI_VB_OUTPUT_DISABLE     0x20  /* CR31 */
+#define XGI_DRIVER_MODE           0x40
+
+#define XGI_VB_COMPOSITE          0x01  /* CR32 */
+#define XGI_VB_SVIDEO             0x02
+#define XGI_VB_SCART              0x04
+#define XGI_VB_LCD                0x08
+#define XGI_VB_CRT2               0x10
+#define XGI_CRT1                  0x20
+#define XGI_VB_HIVISION           0x40
+#define XGI_VB_YPBPR                0x80
+#define XGI_VB_TV                 (XGI_VB_COMPOSITE | XGI_VB_SVIDEO | \
+                                   XGI_VB_SCART | XGI_VB_HIVISION|XGI_VB_YPBPR)
+
+#define XGI_EXTERNAL_CHIP_MASK    	   0x0E  /* CR37 */
+#define XGI_EXTERNAL_CHIP_XGI301           0x01  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS             0x02  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_TRUMPION         0x03  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_LVDS_CHRONTEL    0x04  /* in CR37 << 1 ! */
+#define XGI_EXTERNAL_CHIP_CHRONTEL         0x05  /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS          0x02  /* in CR37 << 1 ! */
+#define XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL 0x03  /* in CR37 << 1 ! */
+
+#define XGI_AGP_2X                0x20  /* CR48 */
+
+#define BRI_DRAM_SIZE_MASK        0x70  /* PCI bridge config data */
+#define BRI_DRAM_SIZE_2MB         0x00
+#define BRI_DRAM_SIZE_4MB         0x01
+#define BRI_DRAM_SIZE_8MB         0x02
+#define BRI_DRAM_SIZE_16MB        0x03
+#define BRI_DRAM_SIZE_32MB        0x04
+#define BRI_DRAM_SIZE_64MB        0x05
+
+#define HW_DEVICE_EXTENSION	  XGI_HW_DEVICE_INFO
+#define PHW_DEVICE_EXTENSION      PXGI_HW_DEVICE_INFO
+
+#define SR_BUFFER_SIZE            5
+#define CR_BUFFER_SIZE            5
+
+/* Useful macros */
+#define inXGIREG(base)          inb(base)
+#define outXGIREG(base,val)     outb(val,base)
+#define orXGIREG(base,val)      do { \
+                                  unsigned char __Temp = inb(base); \
+                                  outXGIREG(base, __Temp | (val)); \
+                                } while (0)
+#define andXGIREG(base,val)     do { \
+                                  unsigned char __Temp = inb(base); \
+                                  outXGIREG(base, __Temp & (val)); \
+                                } while (0)
+#define inXGIIDXREG(base,idx,var)   do { \
+                                      outb(idx,base); var=inb((base)+1); \
+                                    } while (0)
+#define outXGIIDXREG(base,idx,val)  do { \
+                                      outb(idx,base); outb((val),(base)+1); \
+                                    } while (0)
+#define orXGIIDXREG(base,idx,val)   do { \
+                                      unsigned char __Temp; \
+                                      outb(idx,base);   \
+                                      __Temp = inb((base)+1)|(val); \
+                                      outXGIIDXREG(base,idx,__Temp); \
+                                    } while (0)
+#define andXGIIDXREG(base,idx,and)  do { \
+                                      unsigned char __Temp; \
+                                      outb(idx,base);   \
+                                      __Temp = inb((base)+1)&(and); \
+                                      outXGIIDXREG(base,idx,__Temp); \
+                                    } while (0)
+#define setXGIIDXREG(base,idx,and,or)   do { \
+                                          unsigned char __Temp; \
+                                          outb(idx,base);   \
+                                          __Temp = (inb((base)+1)&(and))|(or); \
+                                          outXGIIDXREG(base,idx,__Temp); \
+                                        } while (0)
+
+/* ------------------- Global Variables ----------------------------- */
+
+/* Fbcon variables */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_info* fb_info;
+#else
+static struct fb_info XGI_fb_info;
+#endif
+
+
+static int    video_type = FB_TYPE_PACKED_PIXELS;
+
+static struct fb_var_screeninfo default_var = {
+	.xres		= 0,
+	.yres		= 0,
+	.xres_virtual	= 0,
+	.yres_virtual	= 0,
+	.xoffset	= 0,
+	.yoffset	= 0,
+	.bits_per_pixel	= 0,
+	.grayscale	= 0,
+	.red		= {0, 8, 0},
+	.green		= {0, 8, 0},
+	.blue		= {0, 8, 0},
+	.transp		= {0, 0, 0},
+	.nonstd		= 0,
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.accel_flags	= 0,
+	.pixclock	= 0,
+	.left_margin	= 0,
+	.right_margin	= 0,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.hsync_len	= 0,
+	.vsync_len	= 0,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+	.reserved	= {0, 0, 0, 0, 0, 0}
+#endif
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static struct fb_fix_screeninfo XGIfb_fix = {
+	.id		= "XGI",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.xpanstep	= 1,
+	.ypanstep	= 1,
+};
+static char myid[20];
+static u32 pseudo_palette[17];
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static struct display XGI_disp;
+
+static struct display_switch XGIfb_sw;
+
+static struct {
+	u16 blue, green, red, pad;
+} XGI_palette[256];
+
+static union {
+#ifdef FBCON_HAS_CFB16
+	u16 cfb16[16];
+#endif
+#ifdef FBCON_HAS_CFB32
+	u32 cfb32[16];
+#endif
+} XGI_fbcon_cmap;
+
+static int XGIfb_inverse = 0;
+#endif
+
+/* display status */
+static int XGIfb_off = 0;
+static int XGIfb_crt1off = 0;
+static int XGIfb_forcecrt1 = -1;
+static int XGIvga_enabled = 0;
+static int XGIfb_userom = 0;
+//static int XGIfb_useoem = -1;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+static int currcon = 0;
+#endif
+
+/* global flags */
+static int XGIfb_registered;
+static int XGIfb_tvmode = 0;
+static int XGIfb_mem = 0;
+static int XGIfb_pdc = 0;
+static int enable_dstn = 0;
+static int XGIfb_ypan = -1;
+
+
+int 	   XGIfb_accel = 0;
+
+
+static int XGIfb_hwcursor_size = 0;
+static int XGIfb_CRT2_write_enable = 0;
+
+int XGIfb_crt2type  = -1;	/* TW: CRT2 type (for overriding autodetection) */
+int XGIfb_tvplug    = -1;	/* PR: Tv plug type (for overriding autodetection) */
+
+int XGIfb_queuemode = -1; 	/* TW: Use MMIO queue mode by default (310/325 series only) */
+
+unsigned char XGIfb_detectedpdc = 0;
+
+unsigned char XGIfb_detectedlcda = 0xff;
+
+
+
+
+/* TW: For ioctl XGIFB_GET_INFO */
+/* XGIfb_info XGIfbinfo; */
+
+/* TW: Hardware extension; contains data on hardware */
+HW_DEVICE_EXTENSION XGIhw_ext;
+
+/* TW: XGI private structure */
+VB_DEVICE_INFO  XGI_Pr;
+
+/* card parameters */
+static unsigned long XGIfb_mmio_size = 0;
+static u8            XGIfb_caps = 0;
+
+typedef enum _XGI_CMDTYPE {
+	MMIO_CMD = 0,
+	AGP_CMD_QUEUE,
+	VM_CMD_QUEUE,
+} XGI_CMDTYPE;
+
+#define MD_XGI300 1
+#define MD_XGI315 2
+
+/* mode table */
+/* NOT const - will be patched for 1280x960 mode number chaos reasons */
+struct _XGIbios_mode {
+	char name[15];
+	u8 mode_no;
+	u16 vesa_mode_no_1;  /* "XGI defined" VESA mode number */
+	u16 vesa_mode_no_2;  /* Real VESA mode numbers */
+	u16 xres;
+	u16 yres;
+	u16 bpp;
+	u16 rate_idx;
+	u16 cols;
+	u16 rows;
+	u8  chipset;
+} XGIbios_mode[] = {
+#define MODE_INDEX_NONE           0  /* TW: index for mode=none */
+	{"none",         0xFF, 0x0000, 0x0000,    0,    0,  0, 0,   0,  0, MD_XGI300|MD_XGI315},  /* TW: for mode "none" */
+	{"320x240x16",   0x56, 0x0000, 0x0000,  320,  240, 16, 1,  40, 15,           MD_XGI315},
+	{"320x480x8",    0x5A, 0x0000, 0x0000,  320,  480,  8, 1,  40, 30,           MD_XGI315},  /* TW: FSTN */
+	{"320x480x16",   0x5B, 0x0000, 0x0000,  320,  480, 16, 1,  40, 30,           MD_XGI315},  /* TW: FSTN */
+	{"640x480x8",    0x2E, 0x0101, 0x0101,  640,  480,  8, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"640x480x16",   0x44, 0x0111, 0x0111,  640,  480, 16, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"640x480x24",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30, MD_XGI300|MD_XGI315},  /* TW: That's for people who mix up color- and fb depth */
+	{"640x480x32",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30, MD_XGI300|MD_XGI315},
+	{"720x480x8",    0x31, 0x0000, 0x0000,  720,  480,  8, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x16",   0x33, 0x0000, 0x0000,  720,  480, 16, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x24",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x480x32",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30, MD_XGI300|MD_XGI315},
+	{"720x576x8",    0x32, 0x0000, 0x0000,  720,  576,  8, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x16",   0x34, 0x0000, 0x0000,  720,  576, 16, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x24",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"720x576x32",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36, MD_XGI300|MD_XGI315},
+	{"800x480x8",    0x70, 0x0000, 0x0000,  800,  480,  8, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x16",   0x7a, 0x0000, 0x0000,  800,  480, 16, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x24",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+	{"800x480x32",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30, MD_XGI300|MD_XGI315},
+#define DEFAULT_MODE              21 /* TW: index for 800x600x8 */
+#define DEFAULT_LCDMODE           21 /* TW: index for 800x600x8 */
+#define DEFAULT_TVMODE            21 /* TW: index for 800x600x8 */
+	{"800x600x8",    0x30, 0x0103, 0x0103,  800,  600,  8, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x16",   0x47, 0x0114, 0x0114,  800,  600, 16, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x24",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"800x600x32",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37, MD_XGI300|MD_XGI315},
+	{"1024x576x8",   0x71, 0x0000, 0x0000, 1024,  576,  8, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x16",  0x74, 0x0000, 0x0000, 1024,  576, 16, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x24",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x576x32",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36, MD_XGI300|MD_XGI315},
+	{"1024x600x8",   0x20, 0x0000, 0x0000, 1024,  600,  8, 1, 128, 37, MD_XGI300          },  /* TW: 300 series only */
+	{"1024x600x16",  0x21, 0x0000, 0x0000, 1024,  600, 16, 1, 128, 37, MD_XGI300          },
+	{"1024x600x24",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37, MD_XGI300          },
+	{"1024x600x32",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37, MD_XGI300          },
+	{"1024x768x8",   0x38, 0x0105, 0x0105, 1024,  768,  8, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x16",  0x4A, 0x0117, 0x0117, 1024,  768, 16, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x24",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1024x768x32",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48, MD_XGI300|MD_XGI315},
+	{"1152x768x8",   0x23, 0x0000, 0x0000, 1152,  768,  8, 1, 144, 48, MD_XGI300          },  /* TW: 300 series only */
+	{"1152x768x16",  0x24, 0x0000, 0x0000, 1152,  768, 16, 1, 144, 48, MD_XGI300          },
+	{"1152x768x24",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48, MD_XGI300          },
+	{"1152x768x32",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48, MD_XGI300          },
+	{"1280x720x8",   0x79, 0x0000, 0x0000, 1280,  720,  8, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x16",  0x75, 0x0000, 0x0000, 1280,  720, 16, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x24",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x720x32",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45, MD_XGI300|MD_XGI315},
+	{"1280x768x8",   0x23, 0x0000, 0x0000, 1280,  768,  8, 1, 160, 48,           MD_XGI315},  /* TW: 310/325 series only */
+	{"1280x768x16",  0x24, 0x0000, 0x0000, 1280,  768, 16, 1, 160, 48,           MD_XGI315},
+	{"1280x768x24",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,           MD_XGI315},
+	{"1280x768x32",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,           MD_XGI315},
+#define MODEINDEX_1280x960 48
+	{"1280x960x8",   0x7C, 0x0000, 0x0000, 1280,  960,  8, 1, 160, 60, MD_XGI300|MD_XGI315},  /* TW: Modenumbers being patched */
+	{"1280x960x16",  0x7D, 0x0000, 0x0000, 1280,  960, 16, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x960x24",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x960x32",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60, MD_XGI300|MD_XGI315},
+	{"1280x1024x8",  0x3A, 0x0107, 0x0107, 1280, 1024,  8, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64, MD_XGI300|MD_XGI315},
+	{"1400x1050x8",  0x26, 0x0000, 0x0000, 1400, 1050,  8, 1, 175, 65,           MD_XGI315},  /* TW: 310/325 series only */
+	{"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65,           MD_XGI315},
+	{"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,           MD_XGI315},
+	{"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,           MD_XGI315},
+	{"1600x1200x8",  0x3C, 0x0130, 0x011c, 1600, 1200,  8, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x8",  0x68, 0x013f, 0x0000, 1920, 1440,  8, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75, MD_XGI300|MD_XGI315},
+	{"2048x1536x8",  0x6c, 0x0000, 0x0000, 2048, 1536,  8, 1, 256, 96,           MD_XGI315},  /* TW: 310/325 series only */
+	{"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96,           MD_XGI315},
+	{"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,           MD_XGI315},
+	{"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,           MD_XGI315},
+	{"\0", 0x00, 0, 0, 0, 0, 0, 0, 0}
+};
+
+/* mode-related variables */
+#ifdef MODULE
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = 1;
+#else
+static int XGIfb_mode_idx = MODE_INDEX_NONE;  /* Don't use a mode by default if we are a module */
+#endif
+#else
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+static int xgifb_mode_idx = -1;               /* Use a default mode if we are inside the kernel */
+#else
+static int XGIfb_mode_idx = -1;
+#endif
+#endif
+u8  XGIfb_mode_no  = 0;
+u8  XGIfb_rate_idx = 0;
+
+/* TW: CR36 evaluation */
+const USHORT XGI300paneltype[] =
+    { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
+      LCD_1280x960,  LCD_640x480,  LCD_1024x600,  LCD_1152x768,
+       LCD_1024x768, LCD_1024x768,  LCD_1024x768,
+      LCD_1024x768,  LCD_1024x768, LCD_1024x768,  LCD_1024x768 };
+
+const USHORT XGI310paneltype[] =
+    { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
+      LCD_640x480,   LCD_1024x600, LCD_1152x864,  LCD_1280x960,
+      LCD_1152x768,  LCD_1400x1050,LCD_1280x768,  LCD_1600x1200,
+      LCD_1024x768, LCD_1024x768,  LCD_1024x768 };
+
+static const struct _XGI_crt2type {
+	char name[10];
+	int type_no;
+	int tvplug_no;
+} XGI_crt2type[] = {
+	{"NONE", 	0, 		-1},
+	{"LCD",  	DISPTYPE_LCD, 	-1},
+	{"TV",   	DISPTYPE_TV, 	-1},
+	{"VGA",  	DISPTYPE_CRT2, 	-1},
+	{"SVIDEO", 	DISPTYPE_TV, 	TVPLUG_SVIDEO},
+	{"COMPOSITE", 	DISPTYPE_TV, 	TVPLUG_COMPOSITE},
+	{"SCART", 	DISPTYPE_TV, 	TVPLUG_SCART},
+	{"none", 	0, 		-1},
+	{"lcd",  	DISPTYPE_LCD, 	-1},
+	{"tv",   	DISPTYPE_TV, 	-1},
+	{"vga",  	DISPTYPE_CRT2, 	-1},
+	{"svideo", 	DISPTYPE_TV, 	TVPLUG_SVIDEO},
+	{"composite", 	DISPTYPE_TV, 	TVPLUG_COMPOSITE},
+	{"scart", 	DISPTYPE_TV, 	TVPLUG_SCART},
+	{"\0",  	-1, 		-1}
+};
+
+/* Queue mode selection for 310 series */
+static const struct _XGI_queuemode {
+	char name[6];
+	int type_no;
+} XGI_queuemode[] = {
+	{"AGP",  	AGP_CMD_QUEUE},
+	{"VRAM", 	VM_CMD_QUEUE},
+	{"MMIO", 	MMIO_CMD},
+	{"agp",  	AGP_CMD_QUEUE},
+	{"vram", 	VM_CMD_QUEUE},
+	{"mmio", 	MMIO_CMD},
+	{"\0",   	-1}
+};
+
+/* TV standard */
+static const struct _XGI_tvtype {
+	char name[6];
+	int type_no;
+} XGI_tvtype[] = {
+	{"PAL",  	1},
+	{"NTSC", 	2},
+	{"pal", 	1},
+	{"ntsc",  	2},
+	{"\0",   	-1}
+};
+
+static const struct _XGI_vrate {
+	u16 idx;
+	u16 xres;
+	u16 yres;
+	u16 refresh;
+} XGIfb_vrate[] = {
+	{1,  640,  480, 60}, {2,  640,  480,  72}, {3, 640,   480,  75}, {4,  640, 480,  85},
+	{5,  640,  480,100}, {6,  640,  480, 120}, {7, 640,   480, 160}, {8,  640, 480, 200},
+	{1,  720,  480, 60},
+	{1,  720,  576, 58},
+	{1,  800,  480, 60}, {2,  800,  480,  75}, {3, 800,   480,  85},
+        {1,  800,  600,  60}, {2, 800,   600,  72}, {3,  800, 600,  75},
+	{4,  800,  600, 85}, {5,  800,  600, 100}, {6, 800,   600, 120}, {7,  800, 600, 160},
+	{1, 1024,  768,  60}, {2, 1024,  768,  70}, {3, 1024, 768,  75},
+	{4, 1024,  768, 85}, {5, 1024,  768, 100}, {6, 1024,  768, 120},
+	{1, 1024,  576, 60}, {2, 1024,  576,  75}, {3, 1024,  576,  85},
+	{1, 1024,  600, 60},
+	{1, 1152,  768, 60},
+	{1, 1280,  720, 60}, {2, 1280,  720,  75}, {3, 1280,  720,  85},
+	{1, 1280,  768, 60},
+        {1, 1280, 1024,  60}, {2, 1280, 1024,  75}, {3, 1280, 1024,  85},
+	{1, 1280,  960, 70},
+	{1, 1400, 1050, 60},
+	{1, 1600, 1200, 60}, {2, 1600, 1200,  65}, {3, 1600, 1200,  70}, {4, 1600, 1200,  75},
+	{5, 1600, 1200, 85}, {6, 1600, 1200, 100}, {7, 1600, 1200, 120},
+	{1, 1920, 1440, 60}, {2, 1920, 1440,  65}, {3, 1920, 1440,  70}, {4, 1920, 1440,  75},
+	{5, 1920, 1440, 85}, {6, 1920, 1440, 100},
+	{1, 2048, 1536, 60}, {2, 2048, 1536,  65}, {3, 2048, 1536,  70}, {4, 2048, 1536,  75},
+	{5, 2048, 1536, 85},
+	{0, 0, 0, 0}
+};
+
+static const struct _chswtable {
+    int subsysVendor;
+    int subsysCard;
+    char *vendorName;
+    char *cardName;
+} mychswtable[] = {
+        { 0x1631, 0x1002, "Mitachi", "0x1002" },
+	{ 0,      0,      ""       , ""       }
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+/* Offscreen layout */
+typedef struct _XGI_GLYINFO {
+	unsigned char ch;
+	int fontwidth;
+	int fontheight;
+	u8 gmask[72];
+	int ngmask;
+} XGI_GLYINFO;
+#endif
+
+typedef struct _XGI_OH {
+	struct _XGI_OH *poh_next;
+	struct _XGI_OH *poh_prev;
+	unsigned long offset;
+	unsigned long size;
+} XGI_OH;
+
+typedef struct _XGI_OHALLOC {
+	struct _XGI_OHALLOC *poha_next;
+	XGI_OH aoh[1];
+} XGI_OHALLOC;
+
+typedef struct _XGI_HEAP {
+	XGI_OH oh_free;
+	XGI_OH oh_used;
+	XGI_OH *poh_freelist;
+	XGI_OHALLOC *poha_chain;
+	unsigned long max_freesize;
+} XGI_HEAP;
+
+static unsigned long XGIfb_hwcursor_vbase;
+
+static unsigned long XGIfb_heap_start;
+static unsigned long XGIfb_heap_end;
+static unsigned long XGIfb_heap_size;
+static XGI_HEAP      XGIfb_heap;
+
+// Eden Chen
+static const struct _XGI_TV_filter {
+	u8 filter[9][4];
+} XGI_TV_filter[] = {
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_0 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_1 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_2 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xEB,0x04,0x25,0x18},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xF6,0x06,0x1A,0x14},
+	   {0xFA,0x06,0x16,0x14},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_3 */
+	   {0xF1,0x04,0x1F,0x18},
+	   {0xEE,0x0D,0x22,0x06},
+	   {0xF7,0x06,0x19,0x14},
+	   {0xF4,0x0B,0x1C,0x0A},
+	   {0xFA,0x07,0x16,0x12},
+	   {0xF9,0x0A,0x17,0x0C},
+	   {0x00,0x07,0x10,0x12},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_4 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_5 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xEB,0x04,0x25,0x18},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xF6,0x06,0x1A,0x14},
+	   {0xFA,0x06,0x16,0x14},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_6 */
+	   {0xEB,0x04,0x25,0x18},
+	   {0xE7,0x0E,0x29,0x04},
+	   {0xEE,0x0C,0x22,0x08},
+	   {0xF6,0x0B,0x1A,0x0A},
+	   {0xF9,0x0A,0x17,0x0C},
+	   {0xFC,0x0A,0x14,0x0C},
+	   {0x00,0x08,0x10,0x10},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* NTSCFilter_7 */
+	   {0xEC,0x02,0x24,0x1C},
+	   {0xF2,0x04,0x1E,0x18},
+	   {0xEB,0x15,0x25,0xF6},
+	   {0xF4,0x10,0x1C,0x00},
+	   {0xF8,0x0F,0x18,0x02},
+	   {0x00,0x04,0x10,0x18},
+	   {0x01,0x06,0x0F,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_0 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_1 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_2 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xF1,0xF7,0x01,0x32},
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xF9,0xFF,0x17,0x22},
+	   {0xFB,0x01,0x15,0x1E},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_3 */
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xEE,0xFE,0x22,0x24},
+	   {0xF3,0x00,0x1D,0x20},
+	   {0xF9,0x03,0x17,0x1A},
+	   {0xFB,0x02,0x14,0x1E},
+	   {0xFB,0x04,0x15,0x18},
+	   {0x00,0x06,0x10,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_4 */
+	   {0x00,0xE0,0x10,0x60},
+	   {0x00,0xEE,0x10,0x44},
+	   {0x00,0xF4,0x10,0x38},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0x00,0x00,0x10,0x20},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_5 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xF1,0xF7,0x1F,0x32},
+	   {0xF5,0xFB,0x1B,0x2A},
+	   {0xF9,0xFF,0x17,0x22},
+	   {0xFB,0x01,0x15,0x1E},
+	   {0x00,0x04,0x10,0x18},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_6 */
+	   {0xF5,0xEE,0x1B,0x2A},
+	   {0xEE,0xFE,0x22,0x24},
+	   {0xF3,0x00,0x1D,0x20},
+	   {0xF9,0x03,0x17,0x1A},
+	   {0xFB,0x02,0x14,0x1E},
+	   {0xFB,0x04,0x15,0x18},
+	   {0x00,0x06,0x10,0x14},
+	   {0xFF,0xFF,0xFF,0xFF} }},
+	{ {{0x00,0x00,0x00,0x40},  /* PALFilter_7 */
+	   {0xF5,0xEE,0x1B,0x44},
+	   {0xF8,0xF4,0x18,0x38},
+	   {0xFC,0xFB,0x14,0x2A},
+	   {0xEB,0x05,0x25,0x16},
+	   {0xF1,0x05,0x1F,0x16},
+	   {0xFA,0x07,0x16,0x12},
+	   {0x00,0x07,0x10,0x12},
+	   {0xFF,0xFF,0xFF,0xFF} }}
+};
+
+static int           filter = -1;
+static unsigned char filter_tb;
+
+
+/* ---------------------- Routine prototypes ------------------------- */
+
+/* Interface used by the world */
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options);
+#endif
+
+/* Interface to the low level console driver */
+
+
+
+/* fbdev routines */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+       int	XGIfb_init(void);
+static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix,
+			      int con,
+			      struct fb_info *info);
+static int      XGIfb_get_var(struct fb_var_screeninfo *var,
+			      int con,
+			      struct fb_info *info);
+static int      XGIfb_set_var(struct fb_var_screeninfo *var,
+			      int con,
+			      struct fb_info *info);
+static void     XGIfb_crtc_to_var(struct fb_var_screeninfo *var);
+static int      XGIfb_get_cmap(struct fb_cmap *cmap,
+			       int kspc,
+			       int con,
+			       struct fb_info *info);
+static int      XGIfb_set_cmap(struct fb_cmap *cmap,
+			       int kspc,
+			       int con,
+			       struct fb_info *info);
+static int      XGIfb_update_var(int con,
+				 struct fb_info *info);
+static int      XGIfb_switch(int con,
+			     struct fb_info *info);
+static void     XGIfb_blank(int blank,
+			    struct fb_info *info);
+static void     XGIfb_set_disp(int con,
+			       struct fb_var_screeninfo *var,
+                               struct fb_info *info);
+static int      XGI_getcolreg(unsigned regno, unsigned *red, unsigned *green,
+			      unsigned *blue, unsigned *transp,
+			      struct fb_info *fb_info);
+static void     XGIfb_do_install_cmap(int con,
+                                      struct fb_info *info);
+static void     XGI_get_glyph(struct fb_info *info,
+                              XGI_GLYINFO *gly);
+static int 	XGIfb_mmap(struct fb_info *info, struct file *file,
+		           struct vm_area_struct *vma);
+static int      XGIfb_ioctl(struct inode *inode, struct file *file,
+		       	    unsigned int cmd, unsigned long arg, int con,
+		       	    struct fb_info *info);
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+XGIINITSTATIC int __init xgifb_init(void);
+static int      XGIfb_set_par(struct fb_info *info);
+static int      XGIfb_blank(int blank,
+                            struct fb_info *info);
+/*static int 	XGIfb_mmap(struct fb_info *info, struct file *file,
+		           struct vm_area_struct *vma);
+*/
+extern void     fbcon_XGI_fillrect(struct fb_info *info,
+                                   const struct fb_fillrect *rect);
+extern void     fbcon_XGI_copyarea(struct fb_info *info,
+                                   const struct fb_copyarea *area);
+#if 0
+extern void     cfb_imageblit(struct fb_info *info,
+                              const struct fb_image *image);
+#endif
+extern int      fbcon_XGI_sync(struct fb_info *info);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+			    unsigned long arg);
+#else
+static int      XGIfb_ioctl(struct inode *inode,
+	 		    struct file *file,
+		       	    unsigned int cmd,
+			    unsigned long arg,
+		       	    struct fb_info *info);
+#endif
+
+/*
+extern int	XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr,
+			      PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			      unsigned char modeno, unsigned char rateindex);
+extern int      XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			 unsigned char modeno, unsigned char rateindex,
+			 unsigned int *left_margin, unsigned int *right_margin,
+			 unsigned int *upper_margin, unsigned int *lower_margin,
+			 unsigned int *hsync_len, unsigned int *vsync_len,
+			 unsigned int *sync, unsigned int *vmode);
+*/
+#endif
+			extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
+static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+			      struct fb_info *info);
+
+/* Internal 2D accelerator functions */
+extern int      XGIfb_initaccel(void);
+extern void     XGIfb_syncaccel(void);
+
+/* Internal general routines */
+static void     XGIfb_search_mode(const char *name);
+static int      XGIfb_validate_mode(int modeindex);
+static u8       XGIfb_search_refresh_rate(unsigned int rate);
+static int      XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			unsigned blue, unsigned transp,
+			struct fb_info *fb_info);
+static int      XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+		      	struct fb_info *info);
+static void     XGIfb_pre_setmode(void);
+static void     XGIfb_post_setmode(void);
+
+static BOOLEAN  XGIfb_CheckVBRetrace(void);
+static BOOLEAN  XGIfbcheckvretracecrt2(void);
+static BOOLEAN  XGIfbcheckvretracecrt1(void);
+static BOOLEAN  XGIfb_bridgeisslave(void);
+
+struct XGI_memreq {
+	unsigned long offset;
+	unsigned long size;
+};
+
+/* XGI-specific Export functions */
+void            XGI_dispinfo(struct ap_data *rec);
+void            XGI_malloc(struct XGI_memreq *req);
+void            XGI_free(unsigned long base);
+
+/* Internal hardware access routines */
+void            XGIfb_set_reg4(u16 port, unsigned long data);
+u32             XGIfb_get_reg3(u16 port);
+
+/* Chipset-dependent internal routines */
+
+
+static int      XGIfb_get_dram_size(void);
+static void     XGIfb_detect_VB(void);
+static void     XGIfb_get_VB_type(void);
+static int      XGIfb_has_VB(void);
+
+
+/* Internal heap routines */
+static int      XGIfb_heap_init(void);
+static XGI_OH   *XGIfb_poh_new_node(void);
+static XGI_OH   *XGIfb_poh_allocate(unsigned long size);
+static void     XGIfb_delete_node(XGI_OH *poh);
+static void     XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh);
+static XGI_OH   *XGIfb_poh_free(unsigned long base);
+static void     XGIfb_free_node(XGI_OH *poh);
+
+/* Internal routines to access PCI configuration space */
+BOOLEAN         XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	          	unsigned long offset, unsigned long set, unsigned long *value);
+//BOOLEAN         XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+//	         	unsigned long offset, unsigned long set, unsigned long *value);
+
+
+/* Routines from init.c/init301.c */
+extern void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+extern BOOLEAN  XGIInitNew(PXGI_HW_DEVICE_INFO HwDeviceExtension);
+extern BOOLEAN  XGISetModeNew(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo);
+//extern void     XGI_SetEnableDstn(VB_DEVICE_INFO *XGI_Pr);
+extern void     XGI_LongWait(VB_DEVICE_INFO *XGI_Pr);
+extern USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+/* TW: Chrontel TV functions */
+extern USHORT 	XGI_GetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void 	XGI_SetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern USHORT 	XGI_GetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void 	XGI_SetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
+extern void     XGI_SetCH70xxANDOR(VB_DEVICE_INFO *XGI_Pr, USHORT tempax,USHORT tempbh);
+extern void     XGI_DDC2Delay(VB_DEVICE_INFO *XGI_Pr, USHORT delaytime);
+
+/* TW: Sensing routines */
+void            XGI_Sense30x(void);
+int             XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch);
+
+extern XGI21_LVDSCapStruct XGI21_LCDCapList[13];
+#endif
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
new file mode 100644
index 0000000..867012b
--- /dev/null
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -0,0 +1,3773 @@
+/*
+ * XG20, XG21, XG40, XG42 frame buffer device
+ * for Linux kernels  2.5.x, 2.6.x
+ * Base on TW's sis fbdev code.
+ */
+
+//#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/selection.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/vt_kern.h>
+#include <linux/capability.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+
+#include "osdef.h"
+
+
+#ifndef XGIFB_PAN
+#define XGIFB_PAN
+#endif
+
+#include <asm/io.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "XGIfb.h"
+#include "vgatypes.h"
+#include "XGI_main.h"
+#include "vb_util.h"
+
+
+#define Index_CR_GPIO_Reg1 0x48
+#define Index_CR_GPIO_Reg2 0x49
+#define Index_CR_GPIO_Reg3 0x4a
+
+#define GPIOG_EN    (1<<6)
+#define GPIOG_WRITE (1<<6)
+#define GPIOG_READ  (1<<1)
+int XGIfb_GetXG21DefaultLVDSModeIdx(void);
+
+/* -------------------- Macro definitions ---------------------------- */
+
+#undef XGIFBDEBUG
+
+#ifdef XGIFBDEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+#else
+#define DPRINTK(fmt, args...)
+#endif
+
+#ifdef XGIFBDEBUG
+static void dumpVGAReg(void)
+{
+    u8 i,reg;
+
+outXGIIDXREG(XGISR, 0x05, 0x86);
+/*
+outXGIIDXREG(XGISR, 0x08, 0x4f);
+outXGIIDXREG(XGISR, 0x0f, 0x20);
+outXGIIDXREG(XGISR, 0x11, 0x4f);
+outXGIIDXREG(XGISR, 0x13, 0x45);
+outXGIIDXREG(XGISR, 0x14, 0x51);
+outXGIIDXREG(XGISR, 0x1e, 0x41);
+outXGIIDXREG(XGISR, 0x1f, 0x0);
+outXGIIDXREG(XGISR, 0x20, 0xa1);
+outXGIIDXREG(XGISR, 0x22, 0xfb);
+outXGIIDXREG(XGISR, 0x26, 0x22);
+outXGIIDXREG(XGISR, 0x3e, 0x07);
+*/
+
+//outXGIIDXREG(XGICR, 0x19, 0x00);
+//outXGIIDXREG(XGICR, 0x1a, 0x3C);
+//outXGIIDXREG(XGICR, 0x22, 0xff);
+//outXGIIDXREG(XGICR, 0x3D, 0x10);
+
+//outXGIIDXREG(XGICR, 0x4a, 0xf3);
+
+//outXGIIDXREG(XGICR, 0x57, 0x0);
+//outXGIIDXREG(XGICR, 0x7a, 0x2c);
+
+//outXGIIDXREG(XGICR, 0x82, 0xcc);
+//outXGIIDXREG(XGICR, 0x8c, 0x0);
+/*
+outXGIIDXREG(XGICR, 0x99, 0x1);
+outXGIIDXREG(XGICR, 0x41, 0x40);
+*/
+
+    for(i=0; i < 0x4f; i++)
+    {
+        inXGIIDXREG(XGISR, i, reg);
+        printk("\no 3c4 %x",i);
+        printk("\ni 3c5 => %x",reg);
+    }
+
+    for(i=0; i < 0xF0; i++)
+    {
+        inXGIIDXREG(XGICR, i, reg);
+        printk("\no 3d4 %x",i);
+        printk("\ni 3d5 => %x",reg);
+    }
+/*
+
+    outXGIIDXREG(XGIPART1,0x2F,1);
+    for(i=1; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART1, i, reg);
+        printk("\no d004 %x",i);
+        printk("\ni d005 => %x",reg);
+    }
+
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART2, i, reg);
+        printk("\no d010 %x",i);
+        printk("\ni d011 => %x",reg);
+    }
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART3, i, reg);
+        printk("\no d012 %x",i);
+        printk("\ni d013 => %x",reg);
+    }
+    for(i=0; i < 0x50; i++)
+    {
+        inXGIIDXREG(XGIPART4, i, reg);
+        printk("\no d014 %x",i);
+        printk("\ni d015 => %x",reg);
+    }
+*/
+}
+#else
+static inline void dumpVGAReg(void) {}
+#endif
+
+/* data for XGI components */
+struct video_info  xgi_video_info;
+
+
+#if 1
+#define DEBUGPRN(x)
+#else
+#define DEBUGPRN(x) printk(KERN_INFO x "\n");
+#endif
+
+
+/* --------------- Hardware Access Routines -------------------------- */
+
+#ifdef LINUX_KERNEL
+int
+XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			  unsigned char modeno, unsigned char rateindex)
+{
+    USHORT ModeNo = modeno;
+    USHORT ModeIdIndex = 0, ClockIndex = 0;
+    USHORT RefreshRateTableIndex = 0;
+
+    /*ULONG  temp = 0;*/
+    int    Clock;
+    XGI_Pr->ROMAddr  = HwDeviceExtension->pjVirtualRomBase;
+    InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+
+/*
+    temp = XGI_SearchModeID( ModeNo , &ModeIdIndex,  XGI_Pr ) ;
+    if(!temp) {
+    	printk(KERN_ERR "Could not find mode %x\n", ModeNo);
+    	return 65000;
+    }
+
+    RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+    RefreshRateTableIndex += (rateindex - 1);
+
+*/
+    ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+    if(HwDeviceExtension->jChipType < XGI_315H) {
+       ClockIndex &= 0x3F;
+    }
+    Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000 ;
+
+    return(Clock);
+}
+
+int
+XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			 unsigned char modeno, unsigned char rateindex,
+			 u32 *left_margin, u32 *right_margin,
+			 u32 *upper_margin, u32 *lower_margin,
+			 u32 *hsync_len, u32 *vsync_len,
+			 u32 *sync, u32 *vmode)
+{
+    USHORT ModeNo = modeno;
+    USHORT ModeIdIndex = 0, index = 0;
+    USHORT RefreshRateTableIndex = 0;
+
+    unsigned short VRE, VBE, VRS, VBS, VDE, VT;
+    unsigned short HRE, HBE, HRS, HBS, HDE, HT;
+    unsigned char  sr_data, cr_data, cr_data2;
+    unsigned long cr_data3;
+    int            A, B, C, D, E, F, temp, j;
+    XGI_Pr->ROMAddr  = HwDeviceExtension->pjVirtualRomBase;
+    InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
+  RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, XGI_Pr ) ;
+/*
+    temp = XGI_SearchModeID( ModeNo, &ModeIdIndex, XGI_Pr);
+    if(!temp) return 0;
+
+    RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
+    RefreshRateTableIndex += (rateindex - 1);
+*/
+    index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[0];
+
+    /* Horizontal total */
+    HT = (cr_data & 0xff) |
+         ((unsigned short) (sr_data & 0x03) << 8);
+    A = HT + 5;
+
+    /*cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+     Horizontal display enable end
+    HDE = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x0C) << 6);*/
+    HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) -1;
+    E = HDE + 1;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[3];
+
+    /* Horizontal retrace (=sync) start */
+    HRS = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0xC0) << 2);
+    F = HRS - E - 3;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
+
+    /* Horizontal blank start */
+    HBS = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x30) << 4);
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[6];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[2];
+
+    cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[4];
+
+    /* Horizontal blank end */
+    HBE = (cr_data & 0x1f) |
+          ((unsigned short) (cr_data2 & 0x80) >> 2) |
+	  ((unsigned short) (sr_data & 0x03) << 6);
+
+    /* Horizontal retrace (=sync) end */
+    HRE = (cr_data2 & 0x1f) | ((sr_data & 0x04) << 3);
+
+    temp = HBE - ((E - 1) & 255);
+    B = (temp > 0) ? temp : (temp + 256);
+
+    temp = HRE - ((E + F + 3) & 63);
+    C = (temp > 0) ? temp : (temp + 64);
+
+    D = B - F - C;
+
+    *left_margin = D * 8;
+    *right_margin = F * 8;
+    *hsync_len = C * 8;
+
+    sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[14];
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[8];
+
+    cr_data2 = XGI_Pr->XGINEWUB_CRT1Table[index].CR[9];
+
+    /* Vertical total */
+    VT = (cr_data & 0xFF) |
+         ((unsigned short) (cr_data2 & 0x01) << 8) |
+	 ((unsigned short)(cr_data2 & 0x20) << 4) |
+	 ((unsigned short) (sr_data & 0x01) << 10);
+    A = VT + 2;
+
+    //cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+    /* Vertical display enable end */
+/*    VDE = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x02) << 7) |
+	  ((unsigned short) (cr_data2 & 0x40) << 3) |
+	  ((unsigned short) (sr_data & 0x02) << 9); */
+    VDE = XGI_Pr->RefIndex[RefreshRateTableIndex].YRes  -1;
+    E = VDE + 1;
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[10];
+
+    /* Vertical retrace (=sync) start */
+    VRS = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x04) << 6) |
+	  ((unsigned short) (cr_data2 & 0x80) << 2) |
+	  ((unsigned short) (sr_data & 0x08) << 7);
+    F = VRS + 1 - E;
+
+    cr_data =  XGI_Pr->XGINEWUB_CRT1Table[index].CR[12];
+
+    cr_data3 = (XGI_Pr->XGINEWUB_CRT1Table[index].CR[14] & 0x80) << 5;
+
+    /* Vertical blank start */
+    VBS = (cr_data & 0xff) |
+          ((unsigned short) (cr_data2 & 0x08) << 5) |
+	  ((unsigned short) (cr_data3 & 0x20) << 4) |
+	  ((unsigned short) (sr_data & 0x04) << 8);
+
+    cr_data =  XGI_Pr->XGINEWUB_CRT1Table[index].CR[13];
+
+    /* Vertical blank end */
+    VBE = (cr_data & 0xff) |
+          ((unsigned short) (sr_data & 0x10) << 4);
+    temp = VBE - ((E - 1) & 511);
+    B = (temp > 0) ? temp : (temp + 512);
+
+    cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[11];
+
+    /* Vertical retrace (=sync) end */
+    VRE = (cr_data & 0x0f) | ((sr_data & 0x20) >> 1);
+    temp = VRE - ((E + F - 1) & 31);
+    C = (temp > 0) ? temp : (temp + 32);
+
+    D = B - F - C;
+
+    *upper_margin = D;
+    *lower_margin = F;
+    *vsync_len = C;
+
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x8000)
+       *sync &= ~FB_SYNC_VERT_HIGH_ACT;
+    else
+       *sync |= FB_SYNC_VERT_HIGH_ACT;
+
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x4000)
+       *sync &= ~FB_SYNC_HOR_HIGH_ACT;
+    else
+       *sync |= FB_SYNC_HOR_HIGH_ACT;
+
+    *vmode = FB_VMODE_NONINTERLACED;
+    if(XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_InfoFlag & 0x0080)
+       *vmode = FB_VMODE_INTERLACED;
+    else {
+      j = 0;
+      while(XGI_Pr->EModeIDTable[j].Ext_ModeID != 0xff) {
+          if(XGI_Pr->EModeIDTable[j].Ext_ModeID ==
+	                  XGI_Pr->RefIndex[RefreshRateTableIndex].ModeID) {
+              if(XGI_Pr->EModeIDTable[j].Ext_ModeFlag & DoubleScanMode) {
+	      	  *vmode = FB_VMODE_DOUBLE;
+              }
+	      break;
+          }
+	  j++;
+      }
+    }
+
+#if 0  /* That's bullshit, only the resolution needs to be shifted */
+    if((*vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+       *upper_margin <<= 1;
+       *lower_margin <<= 1;
+       *vsync_len <<= 1;
+    } else if((*vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+       *upper_margin >>= 1;
+       *lower_margin >>= 1;
+       *vsync_len >>= 1;
+    }
+#endif
+
+    return 1;
+}
+
+#endif
+
+
+
+void XGIRegInit(VB_DEVICE_INFO *XGI_Pr, ULONG BaseAddr)
+{
+   XGI_Pr->RelIO = BaseAddr;
+   XGI_Pr->P3c4 = BaseAddr + 0x14;
+   XGI_Pr->P3d4 = BaseAddr + 0x24;
+   XGI_Pr->P3c0 = BaseAddr + 0x10;
+   XGI_Pr->P3ce = BaseAddr + 0x1e;
+   XGI_Pr->P3c2 = BaseAddr + 0x12;
+   XGI_Pr->P3ca = BaseAddr + 0x1a;
+   XGI_Pr->P3c6 = BaseAddr + 0x16;
+   XGI_Pr->P3c7 = BaseAddr + 0x17;
+   XGI_Pr->P3c8 = BaseAddr + 0x18;
+   XGI_Pr->P3c9 = BaseAddr + 0x19;
+   XGI_Pr->P3da = BaseAddr + 0x2A;
+   XGI_Pr->Part1Port = BaseAddr + XGI_CRT2_PORT_04;   /* Digital video interface registers (LCD) */
+   XGI_Pr->Part2Port = BaseAddr + XGI_CRT2_PORT_10;   /* 301 TV Encoder registers */
+   XGI_Pr->Part3Port = BaseAddr + XGI_CRT2_PORT_12;   /* 301 Macrovision registers */
+   XGI_Pr->Part4Port = BaseAddr + XGI_CRT2_PORT_14;   /* 301 VGA2 (and LCD) registers */
+   XGI_Pr->Part5Port = BaseAddr + XGI_CRT2_PORT_14+2; /* 301 palette address port registers */
+
+}
+
+
+void XGIfb_set_reg4(u16 port, unsigned long data)
+{
+	outl((u32) (data & 0xffffffff), port);
+}
+
+u32 XGIfb_get_reg3(u16 port)
+{
+	u32 data;
+
+	data = inl(port);
+	return (data);
+}
+
+/* ------------ Interface for init & mode switching code ------------- */
+
+BOOLEAN
+XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	unsigned long offset, unsigned long set, unsigned long *value)
+{
+	static struct pci_dev *pdev = NULL;
+	static unsigned char init = 0, valid_pdev = 0;
+
+	if (!set)
+		DPRINTK("XGIfb: Get VGA offset 0x%lx\n", offset);
+	else
+		DPRINTK("XGIfb: Set offset 0x%lx to 0x%lx\n", offset, *value);
+
+	if (!init) {
+		init = TRUE;
+		pdev = pci_get_device(PCI_VENDOR_ID_XG, xgi_video_info.chip_id, pdev);
+		if (pdev) {
+			valid_pdev = TRUE;
+			pci_dev_put(pdev);
+		}
+	}
+
+	if (!valid_pdev) {
+		printk(KERN_DEBUG "XGIfb: Can't find XGI %d VGA device.\n",
+				xgi_video_info.chip_id);
+		return FALSE;
+	}
+
+	if (set == 0)
+		pci_read_config_dword(pdev, offset, (u32 *)value);
+	else
+		pci_write_config_dword(pdev, offset, (u32)(*value));
+
+	return TRUE;
+}
+
+/*BOOLEAN XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+	unsigned long offset, unsigned long set, unsigned long *value)
+{
+	static struct pci_dev *pdev = NULL;
+	static unsigned char init = 0, valid_pdev = 0;
+	u16 nbridge_id = 0;
+
+	if (!init) {
+		init = TRUE;
+		switch (xgi_video_info.chip) {
+		case XGI_540:
+			nbridge_id = PCI_DEVICE_ID_XG_540;
+			break;
+		case XGI_630:
+			nbridge_id = PCI_DEVICE_ID_XG_630;
+			break;
+		case XGI_730:
+			nbridge_id = PCI_DEVICE_ID_XG_730;
+			break;
+		case XGI_550:
+			nbridge_id = PCI_DEVICE_ID_XG_550;
+			break;
+		case XGI_650:
+			nbridge_id = PCI_DEVICE_ID_XG_650;
+			break;
+		case XGI_740:
+			nbridge_id = PCI_DEVICE_ID_XG_740;
+			break;
+		default:
+			nbridge_id = 0;
+			break;
+		}
+
+		pdev = pci_find_device(PCI_VENDOR_ID_SI, nbridge_id, pdev);
+		if (pdev)
+			valid_pdev = TRUE;
+	}
+
+	if (!valid_pdev) {
+		printk(KERN_DEBUG "XGIfb: Can't find XGI %d North Bridge device.\n",
+				nbridge_id);
+		return FALSE;
+	}
+
+	if (set == 0)
+		pci_read_config_dword(pdev, offset, (u32 *)value);
+	else
+		pci_write_config_dword(pdev, offset, (u32)(*value));
+
+	return TRUE;
+}
+*/
+/* ------------------ Internal helper routines ----------------- */
+
+static void XGIfb_search_mode(const char *name)
+{
+	int i = 0, j = 0, l;
+
+	if(name == NULL) {
+	   printk(KERN_ERR "XGIfb: Internal error, using default mode.\n");
+	   xgifb_mode_idx = DEFAULT_MODE;
+	   if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+	   {
+	       xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+	   }
+	   return;
+	}
+
+
+        if (!strcmp(name, XGIbios_mode[MODE_INDEX_NONE].name)) {
+	   printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+	   xgifb_mode_idx = DEFAULT_MODE;
+	   if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+	   {
+	       xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+	   }
+	   return;
+	}
+
+	while(XGIbios_mode[i].mode_no != 0) {
+		l = min(strlen(name), strlen(XGIbios_mode[i].name));
+		if (!strncmp(name, XGIbios_mode[i].name, l)) {
+			xgifb_mode_idx = i;
+			j = 1;
+			break;
+		}
+		i++;
+	}
+	if(!j) printk(KERN_INFO "XGIfb: Invalid mode '%s'\n", name);
+}
+
+static void XGIfb_search_vesamode(unsigned int vesamode)
+{
+	int i = 0, j = 0;
+
+	if(vesamode == 0) {
+
+		printk(KERN_ERR "XGIfb: Mode 'none' not supported anymore. Using default.\n");
+		xgifb_mode_idx = DEFAULT_MODE;
+		if ((xgi_video_info.chip == XG21) && ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD))
+		{
+		    xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+		}
+		return;
+	}
+
+	vesamode &= 0x1dff;  /* Clean VESA mode number from other flags */
+
+	while(XGIbios_mode[i].mode_no != 0) {
+		if( (XGIbios_mode[i].vesa_mode_no_1 == vesamode) ||
+		    (XGIbios_mode[i].vesa_mode_no_2 == vesamode) ) {
+			xgifb_mode_idx = i;
+			j = 1;
+			break;
+		}
+		i++;
+	}
+	if(!j) printk(KERN_INFO "XGIfb: Invalid VESA mode 0x%x'\n", vesamode);
+}
+
+int XGIfb_GetXG21LVDSData(void)
+{
+    u8 tmp;
+    unsigned char *pData;
+    int i,j,k;
+
+    inXGIIDXREG(XGISR,0x1e,tmp);
+    outXGIIDXREG(XGISR, 0x1e, tmp|4);
+
+    pData = xgi_video_info.mmio_vbase+0x20000;
+    if ((pData[0x0]==0x55) && (pData[0x1]==0xAA) && (pData[0x65] & 0x1))
+    {
+        i = pData[ 0x316 ] | ( pData[ 0x317 ] << 8 );
+        j = pData[ i-1 ] ;
+        if ( j == 0xff )
+        {
+	  j = 1;
+	}
+        k = 0;
+        do
+        {
+                XGI21_LCDCapList[k].LVDS_Capability = pData[ i ] | ( pData[ i + 1 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHT = pData[ i + 2 ] | ( pData[ i + 3 ] << 8 ) ;
+                XGI21_LCDCapList[k].LVDSVT = pData[ i + 4 ] | ( pData[ i + 5 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHDE = pData[ i + 6 ] | ( pData[ i + 7 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVDE = pData[ i + 8 ] | ( pData[ i + 9 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHFP = pData[ i + 10 ] | ( pData[ i + 11 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVFP = pData[ i + 12 ] | ( pData[ i + 13 ] << 8 );
+                XGI21_LCDCapList[k].LVDSHSYNC = pData[ i + 14 ] | ( pData[ i + 15 ] << 8 );
+                XGI21_LCDCapList[k].LVDSVSYNC = pData[ i + 16 ] | ( pData[ i + 17 ] << 8 );
+                XGI21_LCDCapList[k].VCLKData1 = pData[ i + 18 ] ;
+                XGI21_LCDCapList[k].VCLKData2 = pData[ i + 19 ] ;
+                XGI21_LCDCapList[k].PSC_S1 = pData[ i + 20 ] ;
+                XGI21_LCDCapList[k].PSC_S2 = pData[ i + 21 ] ;
+                XGI21_LCDCapList[k].PSC_S3 = pData[ i + 22 ] ;
+                XGI21_LCDCapList[k].PSC_S4 = pData[ i + 23 ] ;
+                XGI21_LCDCapList[k].PSC_S5 = pData[ i + 24 ] ;
+                i += 25;
+                j--;
+                k++;
+        } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+        return 1;
+    }
+    return 0;
+}
+
+int XGIfb_GetXG21DefaultLVDSModeIdx(void)
+{
+
+	int found_mode = 0;
+	int XGIfb_mode_idx = 0;
+
+	found_mode = 0;
+	while( (XGIbios_mode[XGIfb_mode_idx].mode_no != 0) &&
+	       (XGIbios_mode[XGIfb_mode_idx].xres <= XGI21_LCDCapList[0].LVDSHDE) )
+	{
+		if( (XGIbios_mode[XGIfb_mode_idx].xres == XGI21_LCDCapList[0].LVDSHDE) &&
+		    (XGIbios_mode[XGIfb_mode_idx].yres == XGI21_LCDCapList[0].LVDSVDE) &&
+		    (XGIbios_mode[XGIfb_mode_idx].bpp == 8))
+		{
+			XGIfb_mode_no = XGIbios_mode[XGIfb_mode_idx].mode_no;
+			found_mode = 1;
+			break;
+		}
+		XGIfb_mode_idx++;
+	}
+        if (!found_mode)
+	  XGIfb_mode_idx = 0;
+
+	return (XGIfb_mode_idx);
+}
+
+
+static int XGIfb_validate_mode(int myindex)
+{
+   u16 xres, yres;
+
+    if (xgi_video_info.chip == XG21)
+    {
+        if ((xgi_video_info.disp_state & DISPTYPE_DISP2) == DISPTYPE_LCD)
+        {
+	    xres = XGI21_LCDCapList[0].LVDSHDE;
+	    yres = XGI21_LCDCapList[0].LVDSVDE;
+	    if(XGIbios_mode[myindex].xres > xres)
+	        return(-1);
+            if(XGIbios_mode[myindex].yres > yres)
+	        return(-1);
+            if ((XGIbios_mode[myindex].xres < xres) && (XGIbios_mode[myindex].yres < yres) )
+	    {
+              if (XGIbios_mode[myindex].bpp > 8)
+	          return(-1);
+	    }
+
+       }
+       return(myindex);
+
+    }
+
+    /* FIXME: for now, all is valid on XG27 */
+    if (xgi_video_info.chip == XG27)
+	    return(myindex);
+
+    if(!(XGIbios_mode[myindex].chipset & MD_XGI315))
+        return(-1);
+
+   switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+     case DISPTYPE_LCD:
+	switch (XGIhw_ext.ulCRT2LCDType) {
+	case LCD_640x480:
+		xres =  640; yres =  480;  break;
+	case LCD_800x600:
+		xres =  800; yres =  600;  break;
+        case LCD_1024x600:
+		xres = 1024; yres =  600;  break;
+	case LCD_1024x768:
+	 	xres = 1024; yres =  768;  break;
+	case LCD_1152x768:
+		xres = 1152; yres =  768;  break;
+	case LCD_1280x960:
+	        xres = 1280; yres =  960;  break;
+	case LCD_1280x768:
+		xres = 1280; yres =  768;  break;
+	case LCD_1280x1024:
+		xres = 1280; yres = 1024;  break;
+	case LCD_1400x1050:
+		xres = 1400; yres = 1050;  break;
+	case LCD_1600x1200:
+		xres = 1600; yres = 1200;  break;
+//	case LCD_320x480:				// TW: FSTN
+//		xres =  320; yres =  480;  break;
+	default:
+	        xres =    0; yres =    0;  break;
+	}
+	if(XGIbios_mode[myindex].xres > xres) {
+	        return(-1);
+	}
+        if(XGIbios_mode[myindex].yres > yres) {
+	        return(-1);
+	}
+	if((XGIhw_ext.ulExternalChip == 0x01) ||   // LVDS
+           (XGIhw_ext.ulExternalChip == 0x05))    // LVDS+Chrontel
+	{
+	   switch (XGIbios_mode[myindex].xres) {
+	   	case 512:
+	       		if(XGIbios_mode[myindex].yres != 512) return -1;
+			if(XGIhw_ext.ulCRT2LCDType == LCD_1024x600) return -1;
+	       		break;
+	   	case 640:
+		       	if((XGIbios_mode[myindex].yres != 400) &&
+	           	   (XGIbios_mode[myindex].yres != 480))
+		          	return -1;
+	       		break;
+	   	case 800:
+		       	if(XGIbios_mode[myindex].yres != 600) return -1;
+	       		break;
+	   	case 1024:
+		       	if((XGIbios_mode[myindex].yres != 600) &&
+	           	   (XGIbios_mode[myindex].yres != 768))
+		          	return -1;
+			if((XGIbios_mode[myindex].yres == 600) &&
+			   (XGIhw_ext.ulCRT2LCDType != LCD_1024x600))
+			   	return -1;
+			break;
+		case 1152:
+			if((XGIbios_mode[myindex].yres) != 768) return -1;
+			if(XGIhw_ext.ulCRT2LCDType != LCD_1152x768) return -1;
+			break;
+	   	case 1280:
+		   	if((XGIbios_mode[myindex].yres != 768) &&
+	           	   (XGIbios_mode[myindex].yres != 1024))
+		          	return -1;
+			if((XGIbios_mode[myindex].yres == 768) &&
+			   (XGIhw_ext.ulCRT2LCDType != LCD_1280x768))
+			   	return -1;
+			break;
+	   	case 1400:
+		   	if(XGIbios_mode[myindex].yres != 1050) return -1;
+			break;
+	   	case 1600:
+		   	if(XGIbios_mode[myindex].yres != 1200) return -1;
+			break;
+	   	default:
+		        return -1;
+	   }
+	} else {
+	   switch (XGIbios_mode[myindex].xres) {
+	   	case 512:
+	       		if(XGIbios_mode[myindex].yres != 512) return -1;
+	       		break;
+	   	case 640:
+		       	if((XGIbios_mode[myindex].yres != 400) &&
+	           	   (XGIbios_mode[myindex].yres != 480))
+		          	return -1;
+	       		break;
+	   	case 800:
+		       	if(XGIbios_mode[myindex].yres != 600) return -1;
+	       		break;
+	   	case 1024:
+		       	if(XGIbios_mode[myindex].yres != 768) return -1;
+			break;
+	   	case 1280:
+		   	if((XGIbios_mode[myindex].yres != 960) &&
+	           	   (XGIbios_mode[myindex].yres != 1024))
+		          	return -1;
+			if(XGIbios_mode[myindex].yres == 960) {
+			    if(XGIhw_ext.ulCRT2LCDType == LCD_1400x1050)
+			   	return -1;
+			}
+			break;
+	   	case 1400:
+		   	if(XGIbios_mode[myindex].yres != 1050) return -1;
+			break;
+	   	case 1600:
+		   	if(XGIbios_mode[myindex].yres != 1200) return -1;
+			break;
+	   	default:
+		        return -1;
+	   }
+	}
+	break;
+     case DISPTYPE_TV:
+	switch (XGIbios_mode[myindex].xres) {
+	case 512:
+	case 640:
+	case 800:
+		break;
+	case 720:
+		if (xgi_video_info.TV_type == TVMODE_NTSC) {
+			if (XGIbios_mode[myindex].yres != 480) {
+				return(-1);
+			}
+		} else if (xgi_video_info.TV_type == TVMODE_PAL) {
+			if (XGIbios_mode[myindex].yres != 576) {
+				return(-1);
+			}
+		}
+		// TW: LVDS/CHRONTEL does not support 720
+		if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+					xgi_video_info.hasVB == HASVB_CHRONTEL) {
+				return(-1);
+		}
+		break;
+	case 1024:
+		if (xgi_video_info.TV_type == TVMODE_NTSC) {
+			if(XGIbios_mode[myindex].bpp == 32) {
+			       return(-1);
+			}
+		}
+		// TW: LVDS/CHRONTEL only supports < 800 (1024 on 650/Ch7019)
+		if (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL ||
+					xgi_video_info.hasVB == HASVB_CHRONTEL) {
+		    if(xgi_video_info.chip < XGI_315H) {
+				return(-1);
+		    }
+		}
+		break;
+	default:
+		return(-1);
+	}
+	break;
+     case DISPTYPE_CRT2:
+        if(XGIbios_mode[myindex].xres > 1280) return -1;
+	break;
+     }
+     return(myindex);
+
+}
+
+static void XGIfb_search_crt2type(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while(XGI_crt2type[i].type_no != -1) {
+		if (!strcmp(name, XGI_crt2type[i].name)) {
+			XGIfb_crt2type = XGI_crt2type[i].type_no;
+			XGIfb_tvplug = XGI_crt2type[i].tvplug_no;
+			break;
+		}
+		i++;
+	}
+	if(XGIfb_crt2type < 0)
+		printk(KERN_INFO "XGIfb: Invalid CRT2 type: %s\n", name);
+}
+
+static void XGIfb_search_queuemode(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while (XGI_queuemode[i].type_no != -1) {
+		if (!strcmp(name, XGI_queuemode[i].name)) {
+			XGIfb_queuemode = XGI_queuemode[i].type_no;
+			break;
+		}
+		i++;
+	}
+	if (XGIfb_queuemode < 0)
+		printk(KERN_INFO "XGIfb: Invalid queuemode type: %s\n", name);
+}
+
+static u8 XGIfb_search_refresh_rate(unsigned int rate)
+{
+	u16 xres, yres;
+	int i = 0;
+
+	xres = XGIbios_mode[xgifb_mode_idx].xres;
+	yres = XGIbios_mode[xgifb_mode_idx].yres;
+
+	XGIfb_rate_idx = 0;
+	while ((XGIfb_vrate[i].idx != 0) && (XGIfb_vrate[i].xres <= xres)) {
+		if ((XGIfb_vrate[i].xres == xres) && (XGIfb_vrate[i].yres == yres)) {
+			if (XGIfb_vrate[i].refresh == rate) {
+				XGIfb_rate_idx = XGIfb_vrate[i].idx;
+				break;
+			} else if (XGIfb_vrate[i].refresh > rate) {
+				if ((XGIfb_vrate[i].refresh - rate) <= 3) {
+					DPRINTK("XGIfb: Adjusting rate from %d up to %d\n",
+						rate, XGIfb_vrate[i].refresh);
+					XGIfb_rate_idx = XGIfb_vrate[i].idx;
+					xgi_video_info.refresh_rate = XGIfb_vrate[i].refresh;
+				} else if (((rate - XGIfb_vrate[i-1].refresh) <= 2)
+						&& (XGIfb_vrate[i].idx != 1)) {
+					DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+						rate, XGIfb_vrate[i-1].refresh);
+					XGIfb_rate_idx = XGIfb_vrate[i-1].idx;
+					xgi_video_info.refresh_rate = XGIfb_vrate[i-1].refresh;
+				}
+				break;
+			} else if((rate - XGIfb_vrate[i].refresh) <= 2) {
+				DPRINTK("XGIfb: Adjusting rate from %d down to %d\n",
+						rate, XGIfb_vrate[i].refresh);
+	           		XGIfb_rate_idx = XGIfb_vrate[i].idx;
+		   		break;
+	       		}
+		}
+		i++;
+	}
+	if (XGIfb_rate_idx > 0) {
+		return XGIfb_rate_idx;
+	} else {
+		printk(KERN_INFO
+			"XGIfb: Unsupported rate %d for %dx%d\n", rate, xres, yres);
+		return 0;
+	}
+}
+
+static void XGIfb_search_tvstd(const char *name)
+{
+	int i = 0;
+
+	if(name == NULL)
+		return;
+
+	while (XGI_tvtype[i].type_no != -1) {
+		if (!strcmp(name, XGI_tvtype[i].name)) {
+			XGIfb_tvmode = XGI_tvtype[i].type_no;
+			break;
+		}
+		i++;
+	}
+}
+
+static BOOLEAN XGIfb_bridgeisslave(void)
+{
+   unsigned char usScratchP1_00;
+
+   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+
+   inXGIIDXREG(XGIPART1,0x00,usScratchP1_00);
+   if( (usScratchP1_00 & 0x50) == 0x10)  {
+	   return TRUE;
+   } else {
+           return FALSE;
+   }
+}
+
+static BOOLEAN XGIfbcheckvretracecrt1(void)
+{
+   unsigned char temp;
+
+   inXGIIDXREG(XGICR,0x17,temp);
+   if(!(temp & 0x80)) return FALSE;
+
+
+   inXGIIDXREG(XGISR,0x1f,temp);
+   if(temp & 0xc0) return FALSE;
+
+
+   if(inXGIREG(XGIINPSTAT) & 0x08) return TRUE;
+   else 			   return FALSE;
+}
+
+static BOOLEAN XGIfbcheckvretracecrt2(void)
+{
+   unsigned char temp;
+   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+   inXGIIDXREG(XGIPART1, 0x30, temp);
+   if(temp & 0x02) return FALSE;
+   else 	   return TRUE;
+}
+
+static BOOLEAN XGIfb_CheckVBRetrace(void)
+{
+   if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+      if(XGIfb_bridgeisslave()) {
+         return(XGIfbcheckvretracecrt1());
+      } else {
+         return(XGIfbcheckvretracecrt2());
+      }
+   }
+   return(XGIfbcheckvretracecrt1());
+}
+
+/* ----------- FBDev related routines for all series ----------- */
+
+
+static void XGIfb_bpp_to_var(struct fb_var_screeninfo *var)
+{
+	switch(var->bits_per_pixel) {
+	   case 8:
+	   	var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 6;
+		xgi_video_info.video_cmap_len = 256;
+		break;
+	   case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		xgi_video_info.video_cmap_len = 16;
+		break;
+	   case 32:
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		xgi_video_info.video_cmap_len = 16;
+		break;
+	}
+}
+
+
+
+static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
+		      struct fb_info *info)
+{
+
+	unsigned int htotal = var->left_margin + var->xres +
+		var->right_margin + var->hsync_len;
+	unsigned int vtotal = var->upper_margin + var->yres +
+		var->lower_margin + var->vsync_len;
+#if defined(__powerpc__)
+	u8 sr_data, cr_data;
+#endif
+	unsigned int drate = 0, hrate = 0;
+	int found_mode = 0;
+	int old_mode;
+//	unsigned char reg,reg1;
+
+	DEBUGPRN("Inside do_set_var");
+//        printk(KERN_DEBUG "XGIfb:var->yres=%d, var->upper_margin=%d, var->lower_margin=%d, var->vsync_len=%d\n", var->yres,var->upper_margin,var->lower_margin,var->vsync_len);
+
+        info->var.xres_virtual = var->xres_virtual;
+        info->var.yres_virtual = var->yres_virtual;
+        info->var.bits_per_pixel = var->bits_per_pixel;
+
+	if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED)
+		vtotal <<= 1;
+	else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
+		vtotal <<= 2;
+	else if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
+	{
+//		vtotal <<= 1;
+//		var->yres <<= 1;
+	}
+
+	if(!htotal || !vtotal) {
+		DPRINTK("XGIfb: Invalid 'var' information\n");
+		return -EINVAL;
+	}
+        printk(KERN_DEBUG "XGIfb: var->pixclock=%d, htotal=%d, vtotal=%d\n",
+                var->pixclock,htotal,vtotal);
+
+
+
+	if(var->pixclock && htotal && vtotal) {
+		drate = 1000000000 / var->pixclock;
+		hrate = (drate * 1000) / htotal;
+		xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+	} else {
+		xgi_video_info.refresh_rate = 60;
+	}
+
+	printk(KERN_DEBUG "XGIfb: Change mode to %dx%dx%d-%dHz\n",
+		var->xres,var->yres,var->bits_per_pixel,xgi_video_info.refresh_rate);
+
+	old_mode = xgifb_mode_idx;
+	xgifb_mode_idx = 0;
+
+	while( (XGIbios_mode[xgifb_mode_idx].mode_no != 0) &&
+	       (XGIbios_mode[xgifb_mode_idx].xres <= var->xres) ) {
+		if( (XGIbios_mode[xgifb_mode_idx].xres == var->xres) &&
+		    (XGIbios_mode[xgifb_mode_idx].yres == var->yres) &&
+		    (XGIbios_mode[xgifb_mode_idx].bpp == var->bits_per_pixel)) {
+			XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+			found_mode = 1;
+			break;
+		}
+		xgifb_mode_idx++;
+	}
+
+	if(found_mode)
+		xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+	else
+		xgifb_mode_idx = -1;
+
+       	if(xgifb_mode_idx < 0) {
+		printk(KERN_ERR "XGIfb: Mode %dx%dx%d not supported\n", var->xres,
+		       var->yres, var->bits_per_pixel);
+		xgifb_mode_idx = old_mode;
+		return -EINVAL;
+	}
+
+	if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0) {
+		XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+		xgi_video_info.refresh_rate = 60;
+	}
+
+	if(isactive) {
+
+
+		XGIfb_pre_setmode();
+		if(XGISetModeNew( &XGIhw_ext, XGIfb_mode_no) == 0) {
+			printk(KERN_ERR "XGIfb: Setting mode[0x%x] failed\n", XGIfb_mode_no);
+			return -EINVAL;
+		}
+	info->fix.line_length = ((info->var.xres_virtual * info->var.bits_per_pixel)>>6);
+
+	outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+
+		outXGIIDXREG(XGICR,0x13,(info->fix.line_length & 0x00ff));
+		outXGIIDXREG(XGISR,0x0E,(info->fix.line_length & 0xff00)>>8);
+
+		XGIfb_post_setmode();
+
+		DPRINTK("XGIfb: Set new mode: %dx%dx%d-%d \n",
+			XGIbios_mode[xgifb_mode_idx].xres,
+			XGIbios_mode[xgifb_mode_idx].yres,
+			XGIbios_mode[xgifb_mode_idx].bpp,
+			xgi_video_info.refresh_rate);
+
+		xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+		xgi_video_info.video_vwidth = info->var.xres_virtual;
+		xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+		xgi_video_info.video_vheight = info->var.yres_virtual;
+		xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+		xgi_video_info.org_x = xgi_video_info.org_y = 0;
+		xgi_video_info.video_linelength = info->var.xres_virtual * (xgi_video_info.video_bpp >> 3);
+		xgi_video_info.accel = 0;
+		if(XGIfb_accel) {
+		   xgi_video_info.accel = (var->accel_flags & FB_ACCELF_TEXT) ? -1 : 0;
+		}
+		switch(xgi_video_info.video_bpp)
+		{
+        	case 8:
+           		xgi_video_info.DstColor = 0x0000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00000000;
+ 			    xgi_video_info.video_cmap_len = 256;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, (cr_data & 0xE0));
+#endif
+                break;
+        	case 16:
+            	xgi_video_info.DstColor = 0x8000;
+            	xgi_video_info.XGI310_AccelDepth = 0x00010000;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x0B));
+#endif
+			    xgi_video_info.video_cmap_len = 16;
+            	break;
+        	case 32:
+            	xgi_video_info.DstColor = 0xC000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00020000;
+			    xgi_video_info.video_cmap_len = 16;
+#if defined(__powerpc__)
+                inXGIIDXREG (XGICR, 0x4D, cr_data);
+                outXGIIDXREG(XGICR, 0x4D, ((cr_data & 0xE0) | 0x15));
+#endif
+            	break;
+		    default:
+			    xgi_video_info.video_cmap_len = 16;
+		        printk(KERN_ERR "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+			    xgi_video_info.accel = 0;
+			    break;
+    	}
+	}
+	XGIfb_bpp_to_var(var); /*update ARGB info*/
+	DEBUGPRN("End of do_set_var");
+
+	dumpVGAReg();
+	return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_var(struct fb_var_screeninfo *var)
+{
+	unsigned int base;
+
+//	printk("Inside pan_var");
+
+	if (var->xoffset > (var->xres_virtual - var->xres)) {
+//	        printk( "Pan: xo: %d xv %d xr %d\n",
+//			var->xoffset, var->xres_virtual, var->xres);
+		return -EINVAL;
+	}
+	if(var->yoffset > (var->yres_virtual - var->yres)) {
+//		printk( "Pan: yo: %d yv %d yr %d\n",
+//			var->yoffset, var->yres_virtual, var->yres);
+		return -EINVAL;
+	}
+        base = var->yoffset * var->xres_virtual + var->xoffset;
+
+        /* calculate base bpp dep. */
+        switch(var->bits_per_pixel) {
+        case 16:
+        	base >>= 1;
+        	break;
+	case 32:
+            	break;
+	case 8:
+        default:
+        	base >>= 2;
+            	break;
+        }
+
+	outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+        outXGIIDXREG(XGICR, 0x0D, base & 0xFF);
+	outXGIIDXREG(XGICR, 0x0C, (base >> 8) & 0xFF);
+	outXGIIDXREG(XGISR, 0x0D, (base >> 16) & 0xFF);
+        outXGIIDXREG(XGISR, 0x37, (base >> 24) & 0x03);
+	setXGIIDXREG(XGISR, 0x37, 0xDF, (base >> 21) & 0x04);
+
+        if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
+		orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+        	outXGIIDXREG(XGIPART1, 0x06, (base & 0xFF));
+        	outXGIIDXREG(XGIPART1, 0x05, ((base >> 8) & 0xFF));
+        	outXGIIDXREG(XGIPART1, 0x04, ((base >> 16) & 0xFF));
+		setXGIIDXREG(XGIPART1, 0x02, 0x7F, ((base >> 24) & 0x01) << 7);
+        }
+//	printk("End of pan_var");
+	return 0;
+}
+#endif
+
+
+void XGI_dispinfo(struct ap_data *rec)
+{
+	rec->minfo.bpp    = xgi_video_info.video_bpp;
+	rec->minfo.xres   = xgi_video_info.video_width;
+	rec->minfo.yres   = xgi_video_info.video_height;
+	rec->minfo.v_xres = xgi_video_info.video_vwidth;
+	rec->minfo.v_yres = xgi_video_info.video_vheight;
+	rec->minfo.org_x  = xgi_video_info.org_x;
+	rec->minfo.org_y  = xgi_video_info.org_y;
+	rec->minfo.vrate  = xgi_video_info.refresh_rate;
+	rec->iobase       = xgi_video_info.vga_base - 0x30;
+	rec->mem_size     = xgi_video_info.video_size;
+	rec->disp_state   = xgi_video_info.disp_state;
+	rec->version      = (VER_MAJOR << 24) | (VER_MINOR << 16) | VER_LEVEL;
+	rec->hasVB        = xgi_video_info.hasVB;
+	rec->TV_type      = xgi_video_info.TV_type;
+	rec->TV_plug      = xgi_video_info.TV_plug;
+	rec->chip         = xgi_video_info.chip;
+}
+
+
+
+
+static int XGIfb_open(struct fb_info *info, int user)
+{
+    return 0;
+}
+
+static int XGIfb_release(struct fb_info *info, int user)
+{
+    return 0;
+}
+
+static int XGIfb_get_cmap_len(const struct fb_var_screeninfo *var)
+{
+	int rc = 16;
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		rc = 256;
+		break;
+	case 16:
+		rc = 16;
+		break;
+	case 32:
+		rc = 16;
+		break;
+	}
+	return rc;
+}
+
+static int XGIfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
+                           unsigned transp, struct fb_info *info)
+{
+	if (regno >= XGIfb_get_cmap_len(&info->var))
+		return 1;
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+	        outXGIREG(XGIDACA, regno);
+		outXGIREG(XGIDACD, (red >> 10));
+		outXGIREG(XGIDACD, (green >> 10));
+		outXGIREG(XGIDACD, (blue >> 10));
+		if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+		        outXGIREG(XGIDAC2A, regno);
+			outXGIREG(XGIDAC2D, (red >> 8));
+			outXGIREG(XGIDAC2D, (green >> 8));
+			outXGIREG(XGIDAC2D, (blue >> 8));
+		}
+		break;
+	case 16:
+		((u32 *)(info->pseudo_palette))[regno] =
+		    ((red & 0xf800)) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+		break;
+	case 32:
+		red >>= 8;
+		green >>= 8;
+		blue >>= 8;
+		((u32 *) (info->pseudo_palette))[regno] =
+			(red << 16) | (green << 8) | (blue);
+		break;
+	}
+	return 0;
+}
+
+static int XGIfb_set_par(struct fb_info *info)
+{
+	int err;
+
+//	printk("XGIfb: inside set_par\n");
+        if((err = XGIfb_do_set_var(&info->var, 1, info)))
+		return err;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+	XGIfb_get_fix(&info->fix, info->currcon, info);
+#else
+	XGIfb_get_fix(&info->fix, -1, info);
+#endif
+//	printk("XGIfb:end of set_par\n");
+	return 0;
+}
+
+static int XGIfb_check_var(struct fb_var_screeninfo *var,
+                           struct fb_info *info)
+{
+	unsigned int htotal =
+		var->left_margin + var->xres + var->right_margin +
+		var->hsync_len;
+	unsigned int vtotal = 0;
+	unsigned int drate = 0, hrate = 0;
+	int found_mode = 0;
+	int refresh_rate, search_idx;
+
+	DEBUGPRN("Inside check_var");
+
+	if((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) {
+		vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+		vtotal <<= 1;
+	} else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+		vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+		vtotal <<= 2;
+	} else if((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		vtotal = var->upper_margin + (var->yres/2) + var->lower_margin +
+		         var->vsync_len;
+	} else 	vtotal = var->upper_margin + var->yres + var->lower_margin +
+		         var->vsync_len;
+
+	if(!(htotal) || !(vtotal)) {
+		XGIFAIL("XGIfb: no valid timing data");
+	}
+
+
+        if(var->pixclock && htotal && vtotal) {
+                drate = 1000000000 / var->pixclock;
+                hrate = (drate * 1000) / htotal;
+                xgi_video_info.refresh_rate = (unsigned int) (hrate * 2 / vtotal);
+	printk(KERN_DEBUG \
+		"%s: pixclock = %d ,htotal=%d, vtotal=%d\n" \
+		"%s: drate=%d, hrate=%d, refresh_rate=%d\n",
+		__func__,var->pixclock, htotal, vtotal,
+		__func__, drate, hrate, xgi_video_info.refresh_rate);
+        } else {
+                xgi_video_info.refresh_rate = 60;
+        }
+
+/*
+	if((var->pixclock) && (htotal)) {
+	   drate = 1E12 / var->pixclock;
+	   hrate = drate / htotal;
+	   refresh_rate = (unsigned int) (hrate / vtotal * 2 + 0.5);
+	} else refresh_rate = 60;
+*/
+	/* TW: Calculation wrong for 1024x600 - force it to 60Hz */
+	if((var->xres == 1024) && (var->yres == 600)) refresh_rate = 60;
+
+	search_idx = 0;
+	while((XGIbios_mode[search_idx].mode_no != 0) &&
+	       (XGIbios_mode[search_idx].xres <= var->xres) ) {
+	    if((XGIbios_mode[search_idx].xres == var->xres) &&
+	       (XGIbios_mode[search_idx].yres == var->yres) &&
+		    (XGIbios_mode[search_idx].bpp == var->bits_per_pixel)) {
+		        if(XGIfb_validate_mode(search_idx) > 0) {
+		    found_mode = 1;
+		    break;
+	        }
+	    }
+		search_idx++;
+	}
+
+	if(!found_mode) {
+
+		printk(KERN_ERR "XGIfb: %dx%dx%d is no valid mode\n",
+			var->xres, var->yres, var->bits_per_pixel);
+
+                search_idx = 0;
+		while(XGIbios_mode[search_idx].mode_no != 0) {
+
+		   if( (var->xres <= XGIbios_mode[search_idx].xres) &&
+		       (var->yres <= XGIbios_mode[search_idx].yres) &&
+		       (var->bits_per_pixel == XGIbios_mode[search_idx].bpp) ) {
+		          if(XGIfb_validate_mode(search_idx) > 0) {
+			     found_mode = 1;
+			     break;
+			  }
+		   }
+		   search_idx++;
+	        }
+		if(found_mode) {
+			var->xres = XGIbios_mode[search_idx].xres;
+		      	var->yres = XGIbios_mode[search_idx].yres;
+		      	printk(KERN_DEBUG "XGIfb: Adapted to mode %dx%dx%d\n",
+		   		var->xres, var->yres, var->bits_per_pixel);
+
+		} else {
+		   	printk(KERN_ERR "XGIfb: Failed to find similar mode to %dx%dx%d\n",
+				var->xres, var->yres, var->bits_per_pixel);
+		   	return -EINVAL;
+		}
+	}
+
+	/* TW: TODO: Check the refresh rate */
+
+	/* Adapt RGB settings */
+	XGIfb_bpp_to_var(var);
+
+	/* Sanity check for offsets */
+	if (var->xoffset < 0)
+		var->xoffset = 0;
+	if (var->yoffset < 0)
+		var->yoffset = 0;
+
+
+	if(!XGIfb_ypan) {
+		if(var->xres != var->xres_virtual)
+			 var->xres_virtual = var->xres;
+		if(var->yres != var->yres_virtual)
+			var->yres_virtual = var->yres;
+	}/* else {
+	   // TW: Now patch yres_virtual if we use panning
+	   // May I do this?
+	   var->yres_virtual = xgi_video_info.heapstart / (var->xres * (var->bits_per_pixel >> 3));
+	    if(var->yres_virtual <= var->yres) {
+	    	// TW: Paranoia check
+	        var->yres_virtual = var->yres;
+	    }
+	}*/
+
+	/* Truncate offsets to maximum if too high */
+	if (var->xoffset > var->xres_virtual - var->xres)
+		var->xoffset = var->xres_virtual - var->xres - 1;
+
+	if (var->yoffset > var->yres_virtual - var->yres)
+		var->yoffset = var->yres_virtual - var->yres - 1;
+
+	/* Set everything else to 0 */
+	var->red.msb_right =
+	    var->green.msb_right =
+	    var->blue.msb_right =
+	    var->transp.offset = var->transp.length = var->transp.msb_right = 0;
+
+	DEBUGPRN("end of check_var");
+	return 0;
+}
+
+#ifdef XGIFB_PAN
+static int XGIfb_pan_display( struct fb_var_screeninfo *var,
+				 struct fb_info* info)
+{
+	int err;
+
+//	printk("\nInside pan_display:");
+
+	if (var->xoffset > (var->xres_virtual - var->xres))
+		return -EINVAL;
+	if (var->yoffset > (var->yres_virtual - var->yres))
+		return -EINVAL;
+
+	if (var->vmode & FB_VMODE_YWRAP) {
+		if (var->yoffset < 0
+		    || var->yoffset >= info->var.yres_virtual
+		    || var->xoffset) return -EINVAL;
+	} else {
+		if (var->xoffset + info->var.xres > info->var.xres_virtual ||
+		    var->yoffset + info->var.yres > info->var.yres_virtual)
+			return -EINVAL;
+	}
+
+	if((err = XGIfb_pan_var(var)) < 0) return err;
+
+	info->var.xoffset = var->xoffset;
+	info->var.yoffset = var->yoffset;
+	if (var->vmode & FB_VMODE_YWRAP)
+		info->var.vmode |= FB_VMODE_YWRAP;
+	else
+		info->var.vmode &= ~FB_VMODE_YWRAP;
+
+//	printk(" End of pan_display");
+	return 0;
+}
+#endif
+
+#if 0
+static int XGIfb_mmap(struct fb_info *info, struct file *file,
+		      struct vm_area_struct *vma)
+{
+	unsigned long start;
+	unsigned long off;
+	u32 len, mmio_off;
+
+	DEBUGPRN("inside mmap");
+	if(vma->vm_pgoff > (~0UL >> PAGE_SHIFT))  return -EINVAL;
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+
+	start = (unsigned long) xgi_video_info.video_base;
+	len = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.video_size);
+	start &= PAGE_MASK;
+#if 0
+	if (off >= len) {
+		off -= len;
+#endif
+	/* By Jake Page: Treat mmap request with offset beyond heapstart
+	 *               as request for mapping the mmio area
+	 */
+	#if 1
+	mmio_off = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.heapstart);
+	if(off >= mmio_off) {
+		off -= mmio_off;
+		if(info->var.accel_flags) return -EINVAL;
+
+		start = (unsigned long) xgi_video_info.mmio_base;
+		len = PAGE_ALIGN((start & ~PAGE_MASK) + XGIfb_mmio_size);
+	}
+	start &= PAGE_MASK;
+	#endif
+	if((vma->vm_end - vma->vm_start + off) > len)	return -EINVAL;
+
+	off += start;
+	vma->vm_pgoff = off >> PAGE_SHIFT;
+	vma->vm_flags |= VM_IO;   /* by Jake Page; is that really needed? */
+
+#if defined(__i386__) || defined(__x86_64__)
+	if (boot_cpu_data.x86 > 3)
+		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+#endif
+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start,
+				vma->vm_page_prot))
+		return -EAGAIN;
+
+        DEBUGPRN("end of mmap");
+	return 0;
+}
+#endif
+static int XGIfb_blank(int blank, struct fb_info *info)
+{
+	u8 reg;
+
+	inXGIIDXREG(XGICR, 0x17, reg);
+
+	if(blank > 0)
+		reg &= 0x7f;
+	else
+		reg |= 0x80;
+
+        outXGIIDXREG(XGICR, 0x17, reg);
+	outXGIIDXREG(XGISR, 0x00, 0x01);    /* Synchronous Reset */
+	outXGIIDXREG(XGISR, 0x00, 0x03);    /* End Reset */
+        return(0);
+}
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
+			    unsigned long arg)
+#else
+static int XGIfb_ioctl(struct inode *inode, struct file *file,
+		       unsigned int cmd, unsigned long arg,
+		       struct fb_info *info)
+#endif
+
+{
+	DEBUGPRN("inside ioctl");
+	switch (cmd) {
+	   case FBIO_ALLOC:
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		XGI_malloc((struct XGI_memreq *) arg);
+		break;
+	   case FBIO_FREE:
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		XGI_free(*(unsigned long *) arg);
+		break;
+	   case FBIOGET_HWCINFO:
+		{
+			unsigned long *hwc_offset = (unsigned long *) arg;
+
+			if (XGIfb_caps & HW_CURSOR_CAP)
+				*hwc_offset = XGIfb_hwcursor_vbase -
+				    (unsigned long) xgi_video_info.video_vbase;
+			else
+				*hwc_offset = 0;
+
+			break;
+		}
+	   case FBIOPUT_MODEINFO:
+		{
+			struct mode_info *x = (struct mode_info *)arg;
+
+			xgi_video_info.video_bpp        = x->bpp;
+			xgi_video_info.video_width      = x->xres;
+			xgi_video_info.video_height     = x->yres;
+			xgi_video_info.video_vwidth     = x->v_xres;
+			xgi_video_info.video_vheight    = x->v_yres;
+			xgi_video_info.org_x            = x->org_x;
+			xgi_video_info.org_y            = x->org_y;
+			xgi_video_info.refresh_rate     = x->vrate;
+			xgi_video_info.video_linelength = xgi_video_info.video_vwidth * (xgi_video_info.video_bpp >> 3);
+			switch(xgi_video_info.video_bpp) {
+        		case 8:
+            			xgi_video_info.DstColor = 0x0000;
+	    			xgi_video_info.XGI310_AccelDepth = 0x00000000;
+				xgi_video_info.video_cmap_len = 256;
+            			break;
+        		case 16:
+            			xgi_video_info.DstColor = 0x8000;
+            			xgi_video_info.XGI310_AccelDepth = 0x00010000;
+				xgi_video_info.video_cmap_len = 16;
+            			break;
+        		case 32:
+            			xgi_video_info.DstColor = 0xC000;
+	    			xgi_video_info.XGI310_AccelDepth = 0x00020000;
+				xgi_video_info.video_cmap_len = 16;
+            			break;
+			default:
+				xgi_video_info.video_cmap_len = 16;
+		       	 	printk(KERN_ERR "XGIfb: Unsupported accel depth %d", xgi_video_info.video_bpp);
+				xgi_video_info.accel = 0;
+				break;
+    			}
+
+			break;
+		}
+	   case FBIOGET_DISPINFO:
+		XGI_dispinfo((struct ap_data *)arg);
+		break;
+	   case XGIFB_GET_INFO:  /* TW: New for communication with X driver */
+	        {
+			XGIfb_info *x = (XGIfb_info *)arg;
+
+			//x->XGIfb_id = XGIFB_ID;
+			x->XGIfb_version = VER_MAJOR;
+			x->XGIfb_revision = VER_MINOR;
+			x->XGIfb_patchlevel = VER_LEVEL;
+			x->chip_id = xgi_video_info.chip_id;
+			x->memory = xgi_video_info.video_size / 1024;
+			x->heapstart = xgi_video_info.heapstart / 1024;
+			x->fbvidmode = XGIfb_mode_no;
+			x->XGIfb_caps = XGIfb_caps;
+			x->XGIfb_tqlen = 512; /* yet unused */
+			x->XGIfb_pcibus = xgi_video_info.pcibus;
+			x->XGIfb_pcislot = xgi_video_info.pcislot;
+			x->XGIfb_pcifunc = xgi_video_info.pcifunc;
+			x->XGIfb_lcdpdc = XGIfb_detectedpdc;
+			x->XGIfb_lcda = XGIfb_detectedlcda;
+	                break;
+		}
+	   case XGIFB_GET_VBRSTATUS:
+	        {
+			unsigned long *vbrstatus = (unsigned long *) arg;
+			if(XGIfb_CheckVBRetrace()) *vbrstatus = 1;
+			else		           *vbrstatus = 0;
+		}
+	   default:
+		return -EINVAL;
+	}
+	DEBUGPRN("end of ioctl");
+	return 0;
+
+}
+
+
+
+/* ----------- FBDev related routines for all series ---------- */
+
+static int XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
+			 struct fb_info *info)
+{
+	DEBUGPRN("inside get_fix");
+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+
+	strcpy(fix->id, myid);
+
+	fix->smem_start = xgi_video_info.video_base;
+
+	fix->smem_len = xgi_video_info.video_size;
+
+
+/*        if((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+	    if (xgi_video_info.video_size > 0x1000000) {
+	        fix->smem_len = 0xD00000;
+	    } else if (xgi_video_info.video_size > 0x800000)
+		fix->smem_len = 0x800000;
+	    else
+		fix->smem_len = 0x400000;
+        } else
+		fix->smem_len = XGIfb_mem * 1024;
+*/
+	fix->type        = video_type;
+	fix->type_aux    = 0;
+	if(xgi_video_info.video_bpp == 8)
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		fix->visual = FB_VISUAL_DIRECTCOLOR;
+	fix->xpanstep    = 0;
+#ifdef XGIFB_PAN
+        if(XGIfb_ypan) 	 fix->ypanstep = 1;
+#endif
+	fix->ywrapstep   = 0;
+	fix->line_length = xgi_video_info.video_linelength;
+	fix->mmio_start  = xgi_video_info.mmio_base;
+	fix->mmio_len    = XGIfb_mmio_size;
+    if(xgi_video_info.chip >= XG40)
+	   fix->accel    = FB_ACCEL_XGI_XABRE;
+	else
+	   fix->accel    = FB_ACCEL_XGI_GLAMOUR_2;
+
+
+	DEBUGPRN("end of get_fix");
+	return 0;
+}
+
+
+static struct fb_ops XGIfb_ops = {
+	.owner        =	THIS_MODULE,
+	.fb_open      = XGIfb_open,
+	.fb_release   = XGIfb_release,
+	.fb_check_var = XGIfb_check_var,
+	.fb_set_par   = XGIfb_set_par,
+	.fb_setcolreg = XGIfb_setcolreg,
+#ifdef XGIFB_PAN
+        .fb_pan_display = XGIfb_pan_display,
+#endif
+        .fb_blank     = XGIfb_blank,
+	.fb_fillrect  = fbcon_XGI_fillrect,
+	.fb_copyarea  = fbcon_XGI_copyarea,
+	.fb_imageblit = cfb_imageblit,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
+	.fb_cursor    = soft_cursor,
+#endif
+	.fb_sync      = fbcon_XGI_sync,
+	.fb_ioctl     =	XGIfb_ioctl,
+//	.fb_mmap      =	XGIfb_mmap,
+};
+
+/* ---------------- Chip generation dependent routines ---------------- */
+
+
+/* for XGI 315/550/650/740/330 */
+
+static int XGIfb_get_dram_size(void)
+{
+
+	u8  ChannelNum,tmp;
+	u8  reg = 0;
+
+	/* xorg driver sets 32MB * 1 channel */
+	if (xgi_video_info.chip == XG27)
+		outXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, 0x51);
+
+	        inXGIIDXREG(XGISR, IND_XGI_DRAM_SIZE, reg);
+		switch ((reg & XGI_DRAM_SIZE_MASK) >> 4) {
+		   case XGI_DRAM_SIZE_1MB:
+			xgi_video_info.video_size = 0x100000;
+			break;
+		   case XGI_DRAM_SIZE_2MB:
+			xgi_video_info.video_size = 0x200000;
+			break;
+		   case XGI_DRAM_SIZE_4MB:
+			xgi_video_info.video_size = 0x400000;
+			break;
+		   case XGI_DRAM_SIZE_8MB:
+			xgi_video_info.video_size = 0x800000;
+			break;
+		   case XGI_DRAM_SIZE_16MB:
+			xgi_video_info.video_size = 0x1000000;
+			break;
+		   case XGI_DRAM_SIZE_32MB:
+			xgi_video_info.video_size = 0x2000000;
+			break;
+		   case XGI_DRAM_SIZE_64MB:
+			xgi_video_info.video_size = 0x4000000;
+			break;
+		   case XGI_DRAM_SIZE_128MB:
+			xgi_video_info.video_size = 0x8000000;
+			break;
+		   case XGI_DRAM_SIZE_256MB:
+			xgi_video_info.video_size = 0x10000000;
+			break;
+		   default:
+			return -1;
+		}
+
+		tmp = (reg & 0x0c) >> 2;
+		switch(xgi_video_info.chip)
+		{
+		    case XG20:
+                    case XG21:
+		    case XG27:
+		        ChannelNum = 1;
+		        break;
+
+		    case XG42:
+		        if(reg & 0x04)
+		            ChannelNum = 2;
+		        else
+		            ChannelNum = 1;
+		        break;
+
+		    case XG45:
+		        if(tmp == 1)
+                    ChannelNum = 2;
+                else
+                if(tmp == 2)
+                    ChannelNum = 3;
+                else
+                if(tmp == 3)
+                    ChannelNum = 4;
+                else
+                    ChannelNum = 1;
+		        break;
+
+		    case XG40:
+		    default:
+                if(tmp == 2)
+                    ChannelNum = 2;
+                else
+                if(tmp == 3)
+                    ChannelNum = 3;
+                else
+                    ChannelNum = 1;
+		        break;
+		}
+
+
+		xgi_video_info.video_size = xgi_video_info.video_size * ChannelNum;
+		//PLiad fixed for benchmarking and fb set
+		//xgi_video_info.video_size = 0x200000;//1024x768x16
+		//xgi_video_info.video_size = 0x1000000;//benchmark
+
+		printk("XGIfb: SR14=%x DramSzie %x ChannelNum %x\n",reg,xgi_video_info.video_size ,ChannelNum );
+		return 0;
+
+}
+
+static void XGIfb_detect_VB(void)
+{
+	u8 cr32, temp=0;
+
+	xgi_video_info.TV_plug = xgi_video_info.TV_type = 0;
+
+        switch(xgi_video_info.hasVB) {
+	  case HASVB_LVDS_CHRONTEL:
+	  case HASVB_CHRONTEL:
+	     break;
+	  case HASVB_301:
+	  case HASVB_302:
+//	     XGI_Sense30x(); //Yi-Lin TV Sense?
+	     break;
+	}
+
+	inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR32, cr32);
+
+	if ((cr32 & XGI_CRT1) && !XGIfb_crt1off)
+		XGIfb_crt1off = 0;
+	else {
+		if (cr32 & 0x5F)
+			XGIfb_crt1off = 1;
+		else
+			XGIfb_crt1off = 0;
+	}
+
+	if (XGIfb_crt2type != -1)
+		/* TW: Override with option */
+		xgi_video_info.disp_state = XGIfb_crt2type;
+	else if (cr32 & XGI_VB_TV)
+		xgi_video_info.disp_state = DISPTYPE_TV;
+	else if (cr32 & XGI_VB_LCD)
+		xgi_video_info.disp_state = DISPTYPE_LCD;
+	else if (cr32 & XGI_VB_CRT2)
+		xgi_video_info.disp_state = DISPTYPE_CRT2;
+	else
+		xgi_video_info.disp_state = 0;
+
+	if(XGIfb_tvplug != -1)
+		/* PR/TW: Override with option */
+	        xgi_video_info.TV_plug = XGIfb_tvplug;
+	else if (cr32 & XGI_VB_HIVISION) {
+		xgi_video_info.TV_type = TVMODE_HIVISION;
+		xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	}
+	else if (cr32 & XGI_VB_SVIDEO)
+		xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	else if (cr32 & XGI_VB_COMPOSITE)
+		xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+	else if (cr32 & XGI_VB_SCART)
+		xgi_video_info.TV_plug = TVPLUG_SCART;
+
+	if(xgi_video_info.TV_type == 0) {
+	    /* TW: PAL/NTSC changed for 650 */
+	    if((xgi_video_info.chip <= XGI_315PRO) || (xgi_video_info.chip >= XGI_330)) {
+
+                inXGIIDXREG(XGICR, 0x38, temp);
+		if(temp & 0x10)
+			xgi_video_info.TV_type = TVMODE_PAL;
+		else
+			xgi_video_info.TV_type = TVMODE_NTSC;
+
+	    } else {
+
+	        inXGIIDXREG(XGICR, 0x79, temp);
+		if(temp & 0x20)
+			xgi_video_info.TV_type = TVMODE_PAL;
+		else
+			xgi_video_info.TV_type = TVMODE_NTSC;
+	    }
+	}
+
+	/* TW: Copy forceCRT1 option to CRT1off if option is given */
+    	if (XGIfb_forcecrt1 != -1) {
+    		if (XGIfb_forcecrt1) XGIfb_crt1off = 0;
+		else   	             XGIfb_crt1off = 1;
+    	}
+}
+
+static void XGIfb_get_VB_type(void)
+{
+	u8 reg;
+
+	if (!XGIfb_has_VB()) {
+	        inXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR37, reg);
+		switch ((reg & XGI_EXTERNAL_CHIP_MASK) >> 1) {
+	 	   case XGI310_EXTERNAL_CHIP_LVDS:
+			xgi_video_info.hasVB = HASVB_LVDS;
+			break;
+		   case XGI310_EXTERNAL_CHIP_LVDS_CHRONTEL:
+			xgi_video_info.hasVB = HASVB_LVDS_CHRONTEL;
+			break;
+		   default:
+			break;
+		}
+	}
+}
+
+
+static int XGIfb_has_VB(void)
+{
+	u8 vb_chipid;
+
+	inXGIIDXREG(XGIPART4, 0x00, vb_chipid);
+	switch (vb_chipid) {
+	   case 0x01:
+		xgi_video_info.hasVB = HASVB_301;
+		break;
+	   case 0x02:
+		xgi_video_info.hasVB = HASVB_302;
+		break;
+	   default:
+		xgi_video_info.hasVB = HASVB_NONE;
+		return FALSE;
+	}
+	return TRUE;
+}
+
+
+
+/* ------------------ Sensing routines ------------------ */
+
+/* TW: Determine and detect attached devices on XGI30x */
+int
+XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch)
+{
+    int temp,i;
+
+    outXGIIDXREG(XGIPART4,0x11,tempbl);
+    temp = tempbh | tempcl;
+    setXGIIDXREG(XGIPART4,0x10,0xe0,temp);
+    for(i=0; i<10; i++) XGI_LongWait(&XGI_Pr);
+    tempch &= 0x7f;
+    inXGIIDXREG(XGIPART4,0x03,temp);
+    temp ^= 0x0e;
+    temp &= tempch;
+    return(temp);
+}
+
+void
+XGI_Sense30x(void)
+{
+  u8 backupP4_0d;
+  u8 testsvhs_tempbl, testsvhs_tempbh;
+  u8 testsvhs_tempcl, testsvhs_tempch;
+  u8 testcvbs_tempbl, testcvbs_tempbh;
+  u8 testcvbs_tempcl, testcvbs_tempch;
+  u8 testvga2_tempbl, testvga2_tempbh;
+  u8 testvga2_tempcl, testvga2_tempch;
+  int myflag, result;
+
+  inXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+  outXGIIDXREG(XGIPART4,0x0d,(backupP4_0d | 0x04));
+
+
+
+	testvga2_tempbh = 0x00; testvga2_tempbl = 0xd1;
+        testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xb9;
+	testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xb3;
+	if((XGIhw_ext.ujVBChipID != VB_CHIP_301) &&
+	   (XGIhw_ext.ujVBChipID != VB_CHIP_302)) {
+	      testvga2_tempbh = 0x01; testvga2_tempbl = 0x90;
+	      testsvhs_tempbh = 0x01; testsvhs_tempbl = 0x6b;
+	      testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x74;
+	      if(XGIhw_ext.ujVBChipID == VB_CHIP_301LV ||
+	         XGIhw_ext.ujVBChipID == VB_CHIP_302LV) {
+	         testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+	         testsvhs_tempbh = 0x02; testsvhs_tempbl = 0x00;
+	         testcvbs_tempbh = 0x01; testcvbs_tempbl = 0x00;
+	      }
+	}
+	if(XGIhw_ext.ujVBChipID != VB_CHIP_301LV &&
+	   XGIhw_ext.ujVBChipID != VB_CHIP_302LV) {
+	   inXGIIDXREG(XGIPART4,0x01,myflag);
+	   if(myflag & 0x04) {
+	      testvga2_tempbh = 0x00; testvga2_tempbl = 0xfd;
+	      testsvhs_tempbh = 0x00; testsvhs_tempbl = 0xdd;
+	      testcvbs_tempbh = 0x00; testcvbs_tempbl = 0xee;
+	   }
+	}
+	if((XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+	   (XGIhw_ext.ujVBChipID == VB_CHIP_302LV) ) {
+	   testvga2_tempbh = 0x00; testvga2_tempbl = 0x00;
+	   testvga2_tempch = 0x00; testvga2_tempcl = 0x00;
+	   testsvhs_tempch = 0x04; testsvhs_tempcl = 0x08;
+	   testcvbs_tempch = 0x08; testcvbs_tempcl = 0x08;
+	} else {
+	   testvga2_tempch = 0x0e; testvga2_tempcl = 0x08;
+	   testsvhs_tempch = 0x06; testsvhs_tempcl = 0x04;
+	   testcvbs_tempch = 0x08; testcvbs_tempcl = 0x04;
+	}
+
+
+    if(testvga2_tempch || testvga2_tempcl || testvga2_tempbh || testvga2_tempbl) {
+        result = XGIDoSense(testvga2_tempbl, testvga2_tempbh,
+                            testvga2_tempcl, testvga2_tempch);
+ 	if(result) {
+        	printk(KERN_INFO "XGIfb: Detected secondary VGA connection\n");
+		orXGIIDXREG(XGICR, 0x32, 0x10);
+	}
+    }
+
+    result = XGIDoSense(testsvhs_tempbl, testsvhs_tempbh,
+                        testsvhs_tempcl, testsvhs_tempch);
+    if(result) {
+        printk(KERN_INFO "XGIfb: Detected TV connected to SVHS output\n");
+        /* TW: So we can be sure that there IS a SVHS output */
+	xgi_video_info.TV_plug = TVPLUG_SVIDEO;
+	orXGIIDXREG(XGICR, 0x32, 0x02);
+    }
+
+    if(!result) {
+        result = XGIDoSense(testcvbs_tempbl, testcvbs_tempbh,
+	                    testcvbs_tempcl, testcvbs_tempch);
+	if(result) {
+	    printk(KERN_INFO "XGIfb: Detected TV connected to CVBS output\n");
+	    /* TW: So we can be sure that there IS a CVBS output */
+	    xgi_video_info.TV_plug = TVPLUG_COMPOSITE;
+	    orXGIIDXREG(XGICR, 0x32, 0x01);
+	}
+    }
+    XGIDoSense(0, 0, 0, 0);
+
+    outXGIIDXREG(XGIPART4,0x0d,backupP4_0d);
+}
+
+
+
+/* ------------------------ Heap routines -------------------------- */
+
+static int XGIfb_heap_init(void)
+{
+	XGI_OH *poh;
+	u8 temp=0;
+
+	int            agp_enabled = 1;
+	u32            agp_size;
+	unsigned long *cmdq_baseport = 0;
+	unsigned long *read_port = 0;
+	unsigned long *write_port = 0;
+	XGI_CMDTYPE    cmd_type;
+#ifndef AGPOFF
+	struct agp_kern_info  *agp_info;
+	struct agp_memory     *agp;
+	u32            agp_phys;
+#endif
+
+/* TW: The heap start is either set manually using the "mem" parameter, or
+ *     defaults as follows:
+ *     -) If more than 16MB videoRAM available, let our heap start at 12MB.
+ *     -) If more than  8MB videoRAM available, let our heap start at  8MB.
+ *     -) If 4MB or less is available, let it start at 4MB.
+ *     This is for avoiding a clash with X driver which uses the beginning
+ *     of the videoRAM. To limit size of X framebuffer, use Option MaxXFBMem
+ *     in XF86Config-4.
+ *     The heap start can also be specified by parameter "mem" when starting the XGIfb
+ *     driver. XGIfb mem=1024 lets heap starts at 1MB, etc.
+ */
+     if ((!XGIfb_mem) || (XGIfb_mem > (xgi_video_info.video_size/1024))) {
+        if (xgi_video_info.video_size > 0x1000000) {
+	        xgi_video_info.heapstart = 0xD00000;
+	} else if (xgi_video_info.video_size > 0x800000) {
+	        xgi_video_info.heapstart = 0x800000;
+	} else {
+		xgi_video_info.heapstart = 0x400000;
+	}
+     } else {
+           xgi_video_info.heapstart = XGIfb_mem * 1024;
+     }
+     XGIfb_heap_start =
+	       (unsigned long) (xgi_video_info.video_vbase + xgi_video_info.heapstart);
+     printk(KERN_INFO "XGIfb: Memory heap starting at %dK\n",
+     					(int)(xgi_video_info.heapstart / 1024));
+
+     XGIfb_heap_end = (unsigned long) xgi_video_info.video_vbase + xgi_video_info.video_size;
+     XGIfb_heap_size = XGIfb_heap_end - XGIfb_heap_start;
+
+
+
+        /* TW: Now initialize the 310 series' command queue mode.
+	 * On 310/325, there are three queue modes available which
+	 * are chosen by setting bits 7:5 in SR26:
+	 * 1. MMIO queue mode (bit 5, 0x20). The hardware will keep
+	 *    track of the queue, the FIFO, command parsing and so
+	 *    on. This is the one comparable to the 300 series.
+	 * 2. VRAM queue mode (bit 6, 0x40). In this case, one will
+	 *    have to do queue management himself. Register 0x85c4 will
+	 *    hold the location of the next free queue slot, 0x85c8
+	 *    is the "queue read pointer" whose way of working is
+	 *    unknown to me. Anyway, this mode would require a
+	 *    translation of the MMIO commands to some kind of
+	 *    accelerator assembly and writing these commands
+	 *    to the memory location pointed to by 0x85c4.
+	 *    We will not use this, as nobody knows how this
+	 *    "assembly" works, and as it would require a complete
+	 *    re-write of the accelerator code.
+	 * 3. AGP queue mode (bit 7, 0x80). Works as 2., but keeps the
+	 *    queue in AGP memory space.
+	 *
+	 * SR26 bit 4 is called "Bypass H/W queue".
+	 * SR26 bit 1 is called "Enable Command Queue Auto Correction"
+	 * SR26 bit 0 resets the queue
+	 * Size of queue memory is encoded in bits 3:2 like this:
+	 *    00  (0x00)  512K
+	 *    01  (0x04)  1M
+	 *    10  (0x08)  2M
+	 *    11  (0x0C)  4M
+	 * The queue location is to be written to 0x85C0.
+	 *
+         */
+	cmdq_baseport = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_PHYBASE);
+	write_port    = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_WRITEPORT);
+	read_port     = (unsigned long *)(xgi_video_info.mmio_vbase + MMIO_QUEUE_READPORT);
+
+	DPRINTK("AGP base: 0x%p, read: 0x%p, write: 0x%p\n", cmdq_baseport, read_port, write_port);
+
+	agp_size  = COMMAND_QUEUE_AREA_SIZE;
+
+#ifndef AGPOFF
+	if (XGIfb_queuemode == AGP_CMD_QUEUE) {
+		agp_info = vmalloc(sizeof(*agp_info));
+		memset((void*)agp_info, 0x00, sizeof(*agp_info));
+		agp_copy_info(agp_info);
+
+		agp_backend_acquire();
+
+		agp = agp_allocate_memory(COMMAND_QUEUE_AREA_SIZE/PAGE_SIZE,
+					  AGP_NORMAL_MEMORY);
+		if (agp == NULL) {
+			DPRINTK("XGIfb: Allocating AGP buffer failed.\n");
+			agp_enabled = 0;
+		} else {
+			if (agp_bind_memory(agp, agp->pg_start) != 0) {
+				DPRINTK("XGIfb: AGP: Failed to bind memory\n");
+				/* TODO: Free AGP memory here */
+				agp_enabled = 0;
+			} else {
+				agp_enable(0);
+			}
+		}
+	}
+#else
+	agp_enabled = 0;
+#endif
+
+	/* TW: Now select the queue mode */
+
+	if ((agp_enabled) && (XGIfb_queuemode == AGP_CMD_QUEUE)) {
+		cmd_type = AGP_CMD_QUEUE;
+		printk(KERN_INFO "XGIfb: Using AGP queue mode\n");
+/*	} else if (XGIfb_heap_size >= COMMAND_QUEUE_AREA_SIZE)  */
+        } else if (XGIfb_queuemode == VM_CMD_QUEUE) {
+		cmd_type = VM_CMD_QUEUE;
+		printk(KERN_INFO "XGIfb: Using VRAM queue mode\n");
+	} else {
+		printk(KERN_INFO "XGIfb: Using MMIO queue mode\n");
+		cmd_type = MMIO_CMD;
+	}
+
+	switch (agp_size) {
+	   case 0x80000:
+		temp = XGI_CMD_QUEUE_SIZE_512k;
+		break;
+	   case 0x100000:
+		temp = XGI_CMD_QUEUE_SIZE_1M;
+		break;
+	   case 0x200000:
+		temp = XGI_CMD_QUEUE_SIZE_2M;
+		break;
+	   case 0x400000:
+		temp = XGI_CMD_QUEUE_SIZE_4M;
+		break;
+	}
+
+	switch (cmd_type) {
+	   case AGP_CMD_QUEUE:
+#ifndef AGPOFF
+		DPRINTK("XGIfb: AGP buffer base = 0x%lx, offset = 0x%x, size = %dK\n",
+			agp_info->aper_base, agp->physical, agp_size/1024);
+
+		agp_phys = agp_info->aper_base + agp->physical;
+
+		outXGIIDXREG(XGICR,  IND_XGI_AGP_IO_PAD, 0);
+		outXGIIDXREG(XGICR,  IND_XGI_AGP_IO_PAD, XGI_AGP_2X);
+
+                outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+		*write_port = *read_port;
+
+		temp |= XGI_AGP_CMDQUEUE_ENABLE;
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+		*cmdq_baseport = agp_phys;
+
+		XGIfb_caps |= AGP_CMD_QUEUE_CAP;
+#endif
+		break;
+
+	   case VM_CMD_QUEUE:
+		XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+		XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+
+		*write_port = *read_port;
+
+		temp |= XGI_VRAM_CMDQUEUE_ENABLE;
+		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+
+		*cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+
+		XGIfb_caps |= VM_CMD_QUEUE_CAP;
+
+		DPRINTK("XGIfb: VM Cmd Queue offset = 0x%lx, size is %dK\n",
+			*cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+		break;
+
+	   default:  /* MMIO */
+
+//		printk("%s:%d - I'm here\n", __FUNCTION__, __LINE__);
+	   	/* TW: This previously only wrote XGI_MMIO_CMD_ENABLE
+		 * to IND_XGI_CMDQUEUE_SET. I doubt that this is
+		 * enough. Reserve memory in any way.
+		 */
+// FIXME 	   	XGIfb_heap_end -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME 		XGIfb_heap_size -= COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME 		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+// FIXME 		outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, XGI_CMD_QUEUE_RESET);
+// FIXME
+// FIXME 		*write_port = *read_port;
+// FIXME
+// FIXME 		/* TW: Set Auto_Correction bit */
+// FIXME 		temp |= (XGI_MMIO_CMD_ENABLE | XGI_CMD_AUTO_CORR);
+// FIXME 		// FIXME outXGIIDXREG(XGISR, IND_XGI_CMDQUEUE_SET, temp);
+// FIXME
+// FIXME 		*cmdq_baseport = xgi_video_info.video_size - COMMAND_QUEUE_AREA_SIZE;
+// FIXME
+// FIXME 		XGIfb_caps |= MMIO_CMD_QUEUE_CAP;
+// FIXME
+// FIXME 		DPRINTK("XGIfb: MMIO Cmd Queue offset = 0x%lx, size is %dK\n",
+// FIXME 			*cmdq_baseport, COMMAND_QUEUE_AREA_SIZE/1024);
+		break;
+	}
+
+
+
+
+     /* TW: Now reserve memory for the HWCursor. It is always located at the very
+            top of the videoRAM, right below the TB memory area (if used). */
+     if (XGIfb_heap_size >= XGIfb_hwcursor_size) {
+		XGIfb_heap_end -= XGIfb_hwcursor_size;
+		XGIfb_heap_size -= XGIfb_hwcursor_size;
+		XGIfb_hwcursor_vbase = XGIfb_heap_end;
+
+		XGIfb_caps |= HW_CURSOR_CAP;
+
+		DPRINTK("XGIfb: Hardware Cursor start at 0x%lx, size is %dK\n",
+			XGIfb_heap_end, XGIfb_hwcursor_size/1024);
+     }
+
+     XGIfb_heap.poha_chain = NULL;
+     XGIfb_heap.poh_freelist = NULL;
+
+     poh = XGIfb_poh_new_node();
+
+     if(poh == NULL)  return 1;
+
+     poh->poh_next = &XGIfb_heap.oh_free;
+     poh->poh_prev = &XGIfb_heap.oh_free;
+     poh->size = XGIfb_heap_end - XGIfb_heap_start + 1;
+     poh->offset = XGIfb_heap_start - (unsigned long) xgi_video_info.video_vbase;
+
+     DPRINTK("XGIfb: Heap start:0x%p, end:0x%p, len=%dk\n",
+		(char *) XGIfb_heap_start, (char *) XGIfb_heap_end,
+		(unsigned int) poh->size / 1024);
+
+     DPRINTK("XGIfb: First Node offset:0x%x, size:%dk\n",
+		(unsigned int) poh->offset, (unsigned int) poh->size / 1024);
+
+     XGIfb_heap.oh_free.poh_next = poh;
+     XGIfb_heap.oh_free.poh_prev = poh;
+     XGIfb_heap.oh_free.size = 0;
+     XGIfb_heap.max_freesize = poh->size;
+
+     XGIfb_heap.oh_used.poh_next = &XGIfb_heap.oh_used;
+     XGIfb_heap.oh_used.poh_prev = &XGIfb_heap.oh_used;
+     XGIfb_heap.oh_used.size = SENTINEL;
+
+     return 0;
+}
+
+static XGI_OH *XGIfb_poh_new_node(void)
+{
+	int           i;
+	unsigned long cOhs;
+	XGI_OHALLOC   *poha;
+	XGI_OH        *poh;
+
+	if (XGIfb_heap.poh_freelist == NULL) {
+		poha = kmalloc(OH_ALLOC_SIZE, GFP_KERNEL);
+		if(!poha) return NULL;
+
+		poha->poha_next = XGIfb_heap.poha_chain;
+		XGIfb_heap.poha_chain = poha;
+
+		cOhs = (OH_ALLOC_SIZE - sizeof(XGI_OHALLOC)) / sizeof(XGI_OH) + 1;
+
+		poh = &poha->aoh[0];
+		for (i = cOhs - 1; i != 0; i--) {
+			poh->poh_next = poh + 1;
+			poh = poh + 1;
+		}
+
+		poh->poh_next = NULL;
+		XGIfb_heap.poh_freelist = &poha->aoh[0];
+	}
+
+	poh = XGIfb_heap.poh_freelist;
+	XGIfb_heap.poh_freelist = poh->poh_next;
+
+	return (poh);
+}
+
+static XGI_OH *XGIfb_poh_allocate(unsigned long size)
+{
+	XGI_OH *pohThis;
+	XGI_OH *pohRoot;
+	int     bAllocated = 0;
+
+	if (size > XGIfb_heap.max_freesize) {
+		DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+			(unsigned int) size / 1024);
+		return (NULL);
+	}
+
+	pohThis = XGIfb_heap.oh_free.poh_next;
+
+	while (pohThis != &XGIfb_heap.oh_free) {
+		if (size <= pohThis->size) {
+			bAllocated = 1;
+			break;
+		}
+		pohThis = pohThis->poh_next;
+	}
+
+	if (!bAllocated) {
+		DPRINTK("XGIfb: Can't allocate %dk size on offscreen\n",
+			(unsigned int) size / 1024);
+		return (NULL);
+	}
+
+	if (size == pohThis->size) {
+		pohRoot = pohThis;
+		XGIfb_delete_node(pohThis);
+	} else {
+		pohRoot = XGIfb_poh_new_node();
+
+		if (pohRoot == NULL) {
+			return (NULL);
+		}
+
+		pohRoot->offset = pohThis->offset;
+		pohRoot->size = size;
+
+		pohThis->offset += size;
+		pohThis->size -= size;
+	}
+
+	XGIfb_heap.max_freesize -= size;
+
+	pohThis = &XGIfb_heap.oh_used;
+	XGIfb_insert_node(pohThis, pohRoot);
+
+	return (pohRoot);
+}
+
+static void XGIfb_delete_node(XGI_OH *poh)
+{
+	XGI_OH *poh_prev;
+	XGI_OH *poh_next;
+
+	poh_prev = poh->poh_prev;
+	poh_next = poh->poh_next;
+
+	poh_prev->poh_next = poh_next;
+	poh_next->poh_prev = poh_prev;
+
+}
+
+static void XGIfb_insert_node(XGI_OH *pohList, XGI_OH *poh)
+{
+	XGI_OH *pohTemp;
+
+	pohTemp = pohList->poh_next;
+
+	pohList->poh_next = poh;
+	pohTemp->poh_prev = poh;
+
+	poh->poh_prev = pohList;
+	poh->poh_next = pohTemp;
+}
+
+static XGI_OH *XGIfb_poh_free(unsigned long base)
+{
+	XGI_OH *pohThis;
+	XGI_OH *poh_freed;
+	XGI_OH *poh_prev;
+	XGI_OH *poh_next;
+	unsigned long ulUpper;
+	unsigned long ulLower;
+	int foundNode = 0;
+
+	poh_freed = XGIfb_heap.oh_used.poh_next;
+
+	while(poh_freed != &XGIfb_heap.oh_used) {
+		if(poh_freed->offset == base) {
+			foundNode = 1;
+			break;
+		}
+
+		poh_freed = poh_freed->poh_next;
+	}
+
+	if (!foundNode)  return (NULL);
+
+	XGIfb_heap.max_freesize += poh_freed->size;
+
+	poh_prev = poh_next = NULL;
+	ulUpper = poh_freed->offset + poh_freed->size;
+	ulLower = poh_freed->offset;
+
+	pohThis = XGIfb_heap.oh_free.poh_next;
+
+	while (pohThis != &XGIfb_heap.oh_free) {
+		if (pohThis->offset == ulUpper) {
+			poh_next = pohThis;
+		}
+			else if ((pohThis->offset + pohThis->size) ==
+				 ulLower) {
+			poh_prev = pohThis;
+		}
+		pohThis = pohThis->poh_next;
+	}
+
+	XGIfb_delete_node(poh_freed);
+
+	if (poh_prev && poh_next) {
+		poh_prev->size += (poh_freed->size + poh_next->size);
+		XGIfb_delete_node(poh_next);
+		XGIfb_free_node(poh_freed);
+		XGIfb_free_node(poh_next);
+		return (poh_prev);
+	}
+
+	if (poh_prev) {
+		poh_prev->size += poh_freed->size;
+		XGIfb_free_node(poh_freed);
+		return (poh_prev);
+	}
+
+	if (poh_next) {
+		poh_next->size += poh_freed->size;
+		poh_next->offset = poh_freed->offset;
+		XGIfb_free_node(poh_freed);
+		return (poh_next);
+	}
+
+	XGIfb_insert_node(&XGIfb_heap.oh_free, poh_freed);
+
+	return (poh_freed);
+}
+
+static void XGIfb_free_node(XGI_OH *poh)
+{
+	if(poh == NULL) return;
+
+	poh->poh_next = XGIfb_heap.poh_freelist;
+	XGIfb_heap.poh_freelist = poh;
+
+}
+
+void XGI_malloc(struct XGI_memreq *req)
+{
+	XGI_OH *poh;
+
+	poh = XGIfb_poh_allocate(req->size);
+
+	if(poh == NULL) {
+		req->offset = 0;
+		req->size = 0;
+		DPRINTK("XGIfb: Video RAM allocation failed\n");
+	} else {
+		DPRINTK("XGIfb: Video RAM allocation succeeded: 0x%p\n",
+			(char *) (poh->offset + (unsigned long) xgi_video_info.video_vbase));
+
+		req->offset = poh->offset;
+		req->size = poh->size;
+	}
+
+}
+
+void XGI_free(unsigned long base)
+{
+	XGI_OH *poh;
+
+	poh = XGIfb_poh_free(base);
+
+	if(poh == NULL) {
+		DPRINTK("XGIfb: XGIfb_poh_free() failed at base 0x%x\n",
+			(unsigned int) base);
+	}
+}
+
+/* --------------------- SetMode routines ------------------------- */
+
+static void XGIfb_pre_setmode(void)
+{
+	u8 cr30 = 0, cr31 = 0;
+
+	inXGIIDXREG(XGICR, 0x31, cr31);
+	cr31 &= ~0x60;
+
+	switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+	   case DISPTYPE_CRT2:
+		cr30 = (XGI_VB_OUTPUT_CRT2 | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+		break;
+	   case DISPTYPE_LCD:
+		cr30  = (XGI_VB_OUTPUT_LCD | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+		break;
+	   case DISPTYPE_TV:
+		if (xgi_video_info.TV_type == TVMODE_HIVISION)
+			cr30 = (XGI_VB_OUTPUT_HIVISION | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_SVIDEO)
+			cr30 = (XGI_VB_OUTPUT_SVIDEO | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE)
+			cr30 = (XGI_VB_OUTPUT_COMPOSITE | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		else if (xgi_video_info.TV_plug == TVPLUG_SCART)
+			cr30 = (XGI_VB_OUTPUT_SCART | XGI_SIMULTANEOUS_VIEW_ENABLE);
+		cr31 |= XGI_DRIVER_MODE;
+
+	        if (XGIfb_tvmode == 1 || xgi_video_info.TV_type == TVMODE_PAL)
+			cr31 |= 0x01;
+                else
+                        cr31 &= ~0x01;
+		break;
+	   default:	/* disable CRT2 */
+		cr30 = 0x00;
+		cr31 |= (XGI_DRIVER_MODE | XGI_VB_OUTPUT_DISABLE);
+	}
+
+	outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR30, cr30);
+	outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR31, cr31);
+        outXGIIDXREG(XGICR, IND_XGI_SCRATCH_REG_CR33, (XGIfb_rate_idx & 0x0F));
+
+	if(xgi_video_info.accel) XGIfb_syncaccel();
+
+
+}
+
+static void XGIfb_post_setmode(void)
+{
+	u8 reg;
+	BOOLEAN doit = TRUE;
+#if 0	/* TW: Wrong: Is not in MMIO space, but in RAM */
+	/* Backup mode number to MMIO space */
+	if(xgi_video_info.mmio_vbase) {
+	  *(volatile u8 *)(((u8*)xgi_video_info.mmio_vbase) + 0x449) = (unsigned char)XGIfb_mode_no;
+	}
+#endif
+/*	outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
+	outXGIIDXREG(XGICR,0x13,0x00);
+	setXGIIDXREG(XGISR,0x0E,0xF0,0x01);
+*test**/
+	if (xgi_video_info.video_bpp == 8) {
+		/* TW: We can't switch off CRT1 on LVDS/Chrontel in 8bpp Modes */
+		if ((xgi_video_info.hasVB == HASVB_LVDS) || (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL)) {
+			doit = FALSE;
+		}
+		/* TW: We can't switch off CRT1 on 301B-DH in 8bpp Modes if using LCD */
+		if  (xgi_video_info.disp_state & DISPTYPE_LCD)  {
+	        	doit = FALSE;
+	        }
+	}
+
+	/* TW: We can't switch off CRT1 if bridge is in slave mode */
+	if(xgi_video_info.hasVB != HASVB_NONE) {
+		inXGIIDXREG(XGIPART1, 0x00, reg);
+
+
+		if((reg & 0x50) == 0x10) {
+			doit = FALSE;
+		}
+
+	} else XGIfb_crt1off = 0;
+
+	inXGIIDXREG(XGICR, 0x17, reg);
+	if((XGIfb_crt1off) && (doit))
+		reg &= ~0x80;
+	else
+		reg |= 0x80;
+	outXGIIDXREG(XGICR, 0x17, reg);
+
+        andXGIIDXREG(XGISR, IND_XGI_RAMDAC_CONTROL, ~0x04);
+
+	if((xgi_video_info.disp_state & DISPTYPE_TV) && (xgi_video_info.hasVB == HASVB_301)) {
+
+	   inXGIIDXREG(XGIPART4, 0x01, reg);
+
+	   if(reg < 0xB0) {        	/* Set filter for XGI301 */
+
+		switch (xgi_video_info.video_width) {
+		   case 320:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 4 : 12;
+			break;
+		   case 640:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 5 : 13;
+			break;
+		   case 720:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 6 : 14;
+			break;
+		   case 800:
+			filter_tb = (xgi_video_info.TV_type == TVMODE_NTSC) ? 7 : 15;
+			break;
+		   default:
+			filter = -1;
+			break;
+		}
+
+		orXGIIDXREG(XGIPART1, XGIfb_CRT2_write_enable, 0x01);
+
+		if(xgi_video_info.TV_type == TVMODE_NTSC) {
+
+		        andXGIIDXREG(XGIPART2, 0x3a, 0x1f);
+
+			if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+			        andXGIIDXREG(XGIPART2, 0x30, 0xdf);
+
+			} else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+			        orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+				switch (xgi_video_info.video_width) {
+				case 640:
+				        outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+					outXGIIDXREG(XGIPART2, 0x36, 0x04);
+					outXGIIDXREG(XGIPART2, 0x37, 0x25);
+					outXGIIDXREG(XGIPART2, 0x38, 0x18);
+					break;
+				case 720:
+					outXGIIDXREG(XGIPART2, 0x35, 0xEE);
+					outXGIIDXREG(XGIPART2, 0x36, 0x0C);
+					outXGIIDXREG(XGIPART2, 0x37, 0x22);
+					outXGIIDXREG(XGIPART2, 0x38, 0x08);
+					break;
+				case 800:
+					outXGIIDXREG(XGIPART2, 0x35, 0xEB);
+					outXGIIDXREG(XGIPART2, 0x36, 0x15);
+					outXGIIDXREG(XGIPART2, 0x37, 0x25);
+					outXGIIDXREG(XGIPART2, 0x38, 0xF6);
+					break;
+				}
+			}
+
+		} else if(xgi_video_info.TV_type == TVMODE_PAL) {
+
+			andXGIIDXREG(XGIPART2, 0x3A, 0x1F);
+
+			if (xgi_video_info.TV_plug == TVPLUG_SVIDEO) {
+
+			        andXGIIDXREG(XGIPART2, 0x30, 0xDF);
+
+			} else if (xgi_video_info.TV_plug == TVPLUG_COMPOSITE) {
+
+			        orXGIIDXREG(XGIPART2, 0x30, 0x20);
+
+				switch (xgi_video_info.video_width) {
+				case 640:
+					outXGIIDXREG(XGIPART2, 0x35, 0xF1);
+					outXGIIDXREG(XGIPART2, 0x36, 0xF7);
+					outXGIIDXREG(XGIPART2, 0x37, 0x1F);
+					outXGIIDXREG(XGIPART2, 0x38, 0x32);
+					break;
+				case 720:
+					outXGIIDXREG(XGIPART2, 0x35, 0xF3);
+					outXGIIDXREG(XGIPART2, 0x36, 0x00);
+					outXGIIDXREG(XGIPART2, 0x37, 0x1D);
+					outXGIIDXREG(XGIPART2, 0x38, 0x20);
+					break;
+				case 800:
+					outXGIIDXREG(XGIPART2, 0x35, 0xFC);
+					outXGIIDXREG(XGIPART2, 0x36, 0xFB);
+					outXGIIDXREG(XGIPART2, 0x37, 0x14);
+					outXGIIDXREG(XGIPART2, 0x38, 0x2A);
+					break;
+				}
+			}
+		}
+
+		if ((filter >= 0) && (filter <=7)) {
+			DPRINTK("FilterTable[%d]-%d: %02x %02x %02x %02x\n", filter_tb, filter,
+				XGI_TV_filter[filter_tb].filter[filter][0],
+				XGI_TV_filter[filter_tb].filter[filter][1],
+				XGI_TV_filter[filter_tb].filter[filter][2],
+				XGI_TV_filter[filter_tb].filter[filter][3]
+			);
+			outXGIIDXREG(XGIPART2, 0x35, (XGI_TV_filter[filter_tb].filter[filter][0]));
+			outXGIIDXREG(XGIPART2, 0x36, (XGI_TV_filter[filter_tb].filter[filter][1]));
+			outXGIIDXREG(XGIPART2, 0x37, (XGI_TV_filter[filter_tb].filter[filter][2]));
+			outXGIIDXREG(XGIPART2, 0x38, (XGI_TV_filter[filter_tb].filter[filter][3]));
+		}
+
+	     }
+
+	}
+
+}
+
+#ifndef MODULE
+XGIINITSTATIC int __init XGIfb_setup(char *options)
+{
+	char *this_opt;
+
+
+
+	xgi_video_info.refresh_rate = 0;
+
+        printk(KERN_INFO "XGIfb: Options %s\n", options);
+
+	if (!options || !*options)
+		return 0;
+
+	while((this_opt = strsep(&options, ",")) != NULL) {
+
+		if (!*this_opt)	continue;
+
+		if (!strncmp(this_opt, "mode:", 5)) {
+			XGIfb_search_mode(this_opt + 5);
+		} else if (!strncmp(this_opt, "vesa:", 5)) {
+			XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+		} else if (!strncmp(this_opt, "mode:", 5)) {
+			XGIfb_search_mode(this_opt + 5);
+		} else if (!strncmp(this_opt, "vesa:", 5)) {
+			XGIfb_search_vesamode(simple_strtoul(this_opt + 5, NULL, 0));
+		} else if (!strncmp(this_opt, "vrate:", 6)) {
+			xgi_video_info.refresh_rate = simple_strtoul(this_opt + 6, NULL, 0);
+		} else if (!strncmp(this_opt, "rate:", 5)) {
+			xgi_video_info.refresh_rate = simple_strtoul(this_opt + 5, NULL, 0);
+		} else if (!strncmp(this_opt, "off", 3)) {
+			XGIfb_off = 1;
+		} else if (!strncmp(this_opt, "crt1off", 7)) {
+			XGIfb_crt1off = 1;
+		} else if (!strncmp(this_opt, "filter:", 7)) {
+			filter = (int)simple_strtoul(this_opt + 7, NULL, 0);
+		} else if (!strncmp(this_opt, "forcecrt2type:", 14)) {
+			XGIfb_search_crt2type(this_opt + 14);
+		} else if (!strncmp(this_opt, "forcecrt1:", 10)) {
+			XGIfb_forcecrt1 = (int)simple_strtoul(this_opt + 10, NULL, 0);
+                } else if (!strncmp(this_opt, "tvmode:",7)) {
+		        XGIfb_search_tvstd(this_opt + 7);
+                } else if (!strncmp(this_opt, "tvstandard:",11)) {
+			XGIfb_search_tvstd(this_opt + 7);
+                } else if (!strncmp(this_opt, "mem:",4)) {
+		        XGIfb_mem = simple_strtoul(this_opt + 4, NULL, 0);
+                } else if (!strncmp(this_opt, "dstn", 4)) {
+			enable_dstn = 1;
+			/* TW: DSTN overrules forcecrt2type */
+			XGIfb_crt2type = DISPTYPE_LCD;
+		} else if (!strncmp(this_opt, "queuemode:", 10)) {
+			XGIfb_search_queuemode(this_opt + 10);
+		} else if (!strncmp(this_opt, "pdc:", 4)) {
+		        XGIfb_pdc = simple_strtoul(this_opt + 4, NULL, 0);
+		        if(XGIfb_pdc & ~0x3c) {
+			   printk(KERN_INFO "XGIfb: Illegal pdc parameter\n");
+			   XGIfb_pdc = 0;
+		        }
+		} else if (!strncmp(this_opt, "noaccel", 7)) {
+			XGIfb_accel = 0;
+		} else if (!strncmp(this_opt, "noypan", 6)) {
+		        XGIfb_ypan = 0;
+		} else if (!strncmp(this_opt, "userom:", 7)) {
+			XGIfb_userom = (int)simple_strtoul(this_opt + 7, NULL, 0);
+//		} else if (!strncmp(this_opt, "useoem:", 7)) {
+//			XGIfb_useoem = (int)simple_strtoul(this_opt + 7, NULL, 0);
+		} else {
+			XGIfb_search_mode(this_opt);
+//			printk(KERN_INFO "XGIfb: Invalid option %s\n", this_opt);
+		}
+
+		/* TW: Acceleration only with MMIO mode */
+		if((XGIfb_queuemode != -1) && (XGIfb_queuemode != MMIO_CMD)) {
+			XGIfb_ypan = 0;
+			XGIfb_accel = 0;
+		}
+		/* TW: Panning only with acceleration */
+		if(XGIfb_accel == 0) XGIfb_ypan = 0;
+
+	}
+	printk("\nxgifb: outa xgifb_setup 3450");
+	return 0;
+}
+#endif
+
+static unsigned char VBIOS_BUF[65535];
+
+unsigned char* attempt_map_rom(struct pci_dev *dev,void *copy_address)
+{
+    u32 rom_size      = 0;
+    u32 rom_address   = 0;
+    int j;
+
+    /*  Get the size of the expansion rom */
+    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
+    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
+    if ((rom_size & 0x01) == 0)
+    {
+		printk("No ROM\n");
+		return NULL;
+    }
+
+    rom_size &= 0xFFFFF800;
+    rom_size = (~rom_size)+1;
+
+    rom_address = pci_resource_start(dev, 0);
+    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
+    {
+		printk("No suitable rom address found\n"); return NULL;
+    }
+
+    printk("ROM Size is %dK, Address is %x\n", rom_size/1024, rom_address);
+
+    /*  Map ROM */
+    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
+
+    /* memcpy(copy_address, rom_address, rom_size); */
+    {
+		unsigned char *virt_addr = ioremap(rom_address, 0x8000000);
+
+		unsigned char *from = (unsigned char *)virt_addr;
+		unsigned char *to = (unsigned char *)copy_address;
+		for (j=0; j<65536 /*rom_size*/; j++) *to++ = *from++;
+	}
+
+	pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
+
+    printk("Copy is done\n");
+
+	return copy_address;
+}
+
+int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	u16 reg16;
+	u8  reg, reg1;
+        u8 CR48,CR38;
+	if (XGIfb_off)
+		return -ENXIO;
+
+	XGIfb_registered = 0;
+
+	memset(&XGIhw_ext, 0, sizeof(HW_DEVICE_EXTENSION));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+	  fb_info = framebuffer_alloc(sizeof(struct fb_info), &pdev->dev);
+	  if(!fb_info) return -ENOMEM;
+#else
+	  XGI_fb_info = kmalloc( sizeof(struct fb_info), GFP_KERNEL);
+	  if(!XGI_fb_info) return -ENOMEM;
+	  memset(XGI_fb_info, 0,  sizeof(struct fb_info));
+#endif
+
+  	xgi_video_info.chip_id = pdev->device;
+	  pci_read_config_byte(pdev, PCI_REVISION_ID,&xgi_video_info.revision_id);
+	  pci_read_config_word(pdev, PCI_COMMAND, &reg16);
+	  XGIhw_ext.jChipRevision = xgi_video_info.revision_id;
+	  XGIvga_enabled = reg16 & 0x01;
+
+	  xgi_video_info.pcibus = pdev->bus->number;
+	  xgi_video_info.pcislot = PCI_SLOT(pdev->devfn);
+	  xgi_video_info.pcifunc = PCI_FUNC(pdev->devfn);
+	  xgi_video_info.subsysvendor = pdev->subsystem_vendor;
+	  xgi_video_info.subsysdevice = pdev->subsystem_device;
+
+	  xgi_video_info.video_base = pci_resource_start(pdev, 0);
+	  xgi_video_info.mmio_base = pci_resource_start(pdev, 1);
+	  XGIfb_mmio_size =  pci_resource_len(pdev, 1);
+	  xgi_video_info.vga_base = pci_resource_start(pdev, 2) + 0x30;
+	  XGIhw_ext.pjIOAddress = (PUCHAR)xgi_video_info.vga_base;
+	  //XGI_Pr.RelIO  = ioremap(pci_resource_start(pdev, 2), 128) + 0x30;
+	  printk("XGIfb: Relocate IO address: %lx [%08lx] \n", (unsigned long)pci_resource_start(pdev, 2), XGI_Pr.RelIO);
+
+	  if (pci_enable_device(pdev))
+	          return -EIO;
+
+    XGIRegInit(&XGI_Pr, (ULONG)XGIhw_ext.pjIOAddress);
+
+    outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+    inXGIIDXREG(XGISR, IND_XGI_PASSWORD, reg1);
+
+    if(reg1 != 0xa1) /*I/O error */
+    {
+         printk("\nXGIfb: I/O error!!!");
+         return  -EIO;
+    }
+
+	switch (xgi_video_info.chip_id) {
+	   case PCI_DEVICE_ID_XG_20:
+		orXGIIDXREG(XGICR, Index_CR_GPIO_Reg3, GPIOG_EN);
+		inXGIIDXREG(XGICR, Index_CR_GPIO_Reg1, CR48);
+		if (CR48&GPIOG_READ)
+			xgi_video_info.chip = XG21;
+		else
+		   	xgi_video_info.chip = XG20;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_40:
+		xgi_video_info.chip = XG40;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_41:
+		xgi_video_info.chip = XG41;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_42:
+		xgi_video_info.chip = XG42;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+	    case PCI_DEVICE_ID_XG_27:
+		xgi_video_info.chip = XG27;
+		XGIfb_hwcursor_size = HW_CURSOR_AREA_SIZE_315 * 2;
+		XGIfb_CRT2_write_enable = IND_XGI_CRT2_WRITE_ENABLE_315;
+		break;
+           default:
+	        return -ENODEV;
+	}
+
+	printk("XGIfb:chipid = %x\n",xgi_video_info.chip);
+	 XGIhw_ext.jChipType = xgi_video_info.chip;
+
+		switch (xgi_video_info.chip) {
+		   case XG40:
+		   case XG41:
+		   case XG42:
+		   case XG45:
+		   case XG20:
+		   case XG21:
+                   case XG27:
+                   XGIhw_ext.bIntegratedMMEnabled = TRUE;
+			break;
+
+		   default:
+			break;
+		}
+
+
+	  XGIhw_ext.pDevice = NULL;
+	  if ((xgi_video_info.chip == XG21) || (XGIfb_userom))
+	  {
+	      XGIhw_ext.pjVirtualRomBase = attempt_map_rom(pdev, VBIOS_BUF);
+
+	      if(XGIhw_ext.pjVirtualRomBase)
+			printk(KERN_INFO "XGIfb: Video ROM found and mapped to %p\n",XGIhw_ext.pjVirtualRomBase);
+		else
+			printk(KERN_INFO "XGIfb: Video ROM not found\n");
+    } else {
+	    	XGIhw_ext.pjVirtualRomBase = NULL;
+		printk(KERN_INFO "XGIfb: Video ROM usage disabled\n");
+    }
+	  XGIhw_ext.pjCustomizedROMImage = NULL;
+	  XGIhw_ext.bSkipDramSizing = 0;
+	  XGIhw_ext.pQueryVGAConfigSpace = &XGIfb_query_VGA_config_space;
+//	XGIhw_ext.pQueryNorthBridgeSpace = &XGIfb_query_north_bridge_space;
+	  strcpy(XGIhw_ext.szVBIOSVer, "0.84");
+
+
+    XGIhw_ext.pSR = vmalloc(sizeof(XGI_DSReg) * SR_BUFFER_SIZE);
+	  if (XGIhw_ext.pSR == NULL)
+	  {
+		    printk(KERN_ERR "XGIfb: Fatal error: Allocating SRReg space failed.\n");
+		    return -ENODEV;
+	  }
+	  XGIhw_ext.pSR[0].jIdx = XGIhw_ext.pSR[0].jVal = 0xFF;
+
+	  XGIhw_ext.pCR = vmalloc(sizeof(XGI_DSReg) * CR_BUFFER_SIZE);
+	  if (XGIhw_ext.pCR == NULL)
+	  {
+	      vfree(XGIhw_ext.pSR);
+		    printk(KERN_ERR "XGIfb: Fatal error: Allocating CRReg space failed.\n");
+		    return -ENODEV;
+	  }
+	  XGIhw_ext.pCR[0].jIdx = XGIhw_ext.pCR[0].jVal = 0xFF;
+
+
+
+
+	if (!XGIvga_enabled)
+	{
+			/* Mapping Max FB Size for 315 Init */
+	    XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+	    if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	    {
+#ifdef LINUXBIOS
+		printk("XGIfb: XGIInit() ...");
+		/* XGIInitNewt for LINUXBIOS only */
+		if(XGIInitNew(&XGIhw_ext))
+		{
+			printk("OK\n");
+		}
+		else
+		{
+		    printk("Fail\n");
+		}
+#endif
+
+		outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+
+	    }
+	}
+#ifdef LINUXBIOS
+	else
+	{
+	    XGIhw_ext.pjVideoMemoryAddress = ioremap(xgi_video_info.video_base, 0x10000000);
+	    if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	    {
+
+		outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
+
+		// yilin Because no VBIOS DRAM Sizing, Dram size will error.
+		// Set SR13 ,14 temporarily for UDtech
+		outXGIIDXREG(XGISR, 0x13, 0x45);
+		outXGIIDXREG(XGISR, 0x14, 0x51);
+
+
+	    }
+	}
+#endif
+	if (XGIfb_get_dram_size())
+	{
+	    vfree(XGIhw_ext.pSR);
+	    vfree(XGIhw_ext.pCR);
+	    printk(KERN_INFO "XGIfb: Fatal error: Unable to determine RAM size.\n");
+	    return -ENODEV;
+	}
+
+
+
+	  if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	  {
+	       /* Enable PCI_LINEAR_ADDRESSING and MMIO_ENABLE  */
+        orXGIIDXREG(XGISR, IND_XGI_PCI_ADDRESS_SET, (XGI_PCI_ADDR_ENABLE | XGI_MEM_MAP_IO_ENABLE));
+         /* Enable 2D accelerator engine */
+        orXGIIDXREG(XGISR, IND_XGI_MODULE_ENABLE, XGI_ENABLE_2D);
+    }
+
+	  XGIhw_ext.ulVideoMemorySize = xgi_video_info.video_size;
+
+	  if (!request_mem_region(xgi_video_info.video_base, xgi_video_info.video_size, "XGIfb FB"))
+	  {         printk("unable request memory size %x",xgi_video_info.video_size);
+		    printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve frame buffer memory\n");
+		    printk(KERN_ERR "XGIfb: Is there another framebuffer driver active?\n");
+		    vfree(XGIhw_ext.pSR);
+		    vfree(XGIhw_ext.pCR);
+		    return -ENODEV;
+	  }
+
+	  if (!request_mem_region(xgi_video_info.mmio_base, XGIfb_mmio_size, "XGIfb MMIO"))
+	  {
+		    printk(KERN_ERR "XGIfb: Fatal error: Unable to reserve MMIO region\n");
+		    release_mem_region(xgi_video_info.video_base, xgi_video_info.video_size);
+		    vfree(XGIhw_ext.pSR);
+		    vfree(XGIhw_ext.pCR);
+		    return -ENODEV;
+	  }
+
+	  xgi_video_info.video_vbase = XGIhw_ext.pjVideoMemoryAddress =
+		ioremap(xgi_video_info.video_base, xgi_video_info.video_size);
+	  xgi_video_info.mmio_vbase = ioremap(xgi_video_info.mmio_base, XGIfb_mmio_size);
+
+	  printk(KERN_INFO "XGIfb: Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
+	      xgi_video_info.video_base, xgi_video_info.video_vbase,xgi_video_info.video_size / 1024);
+
+	  printk(KERN_INFO "XGIfb: MMIO at 0x%lx, mapped to 0x%p, size %ldk\n",
+	      xgi_video_info.mmio_base, xgi_video_info.mmio_vbase,XGIfb_mmio_size / 1024);
+          printk("XGIfb: XGIInitNew() ...");
+	  if(XGIInitNew(&XGIhw_ext))
+	  {
+		  printk("OK\n");
+	  }
+	  else
+	  {
+		printk("Fail\n");
+	  }
+
+	  if(XGIfb_heap_init())
+	  {
+		    printk(KERN_WARNING "XGIfb: Failed to initialize offscreen memory heap\n");
+	  }
+
+
+	  xgi_video_info.mtrr = (unsigned int) 0;
+
+	  if((xgifb_mode_idx < 0) || ((XGIbios_mode[xgifb_mode_idx].mode_no) != 0xFF))
+	  {
+		  xgi_video_info.hasVB = HASVB_NONE;
+        if((xgi_video_info.chip == XG20)||(xgi_video_info.chip == XG27))
+	      xgi_video_info.hasVB = HASVB_NONE;
+        else if(xgi_video_info.chip == XG21) {
+            inXGIIDXREG(XGICR,0x38,CR38);
+            if ((CR38&0xE0) == 0xC0) {
+		    xgi_video_info.disp_state = DISPTYPE_LCD;
+        	    if (!XGIfb_GetXG21LVDSData()) {
+			    int m;
+			    for (m=0; m < sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct); m++) {
+				    if ((XGI21_LCDCapList[m].LVDSHDE == XGIbios_mode[xgifb_mode_idx].xres) &&
+					(XGI21_LCDCapList[m].LVDSVDE == XGIbios_mode[xgifb_mode_idx].yres)) {
+						XGINew_SetReg1( XGI_Pr.P3d4 , 0x36, m) ;
+				    }
+			    }
+		    }
+            }
+            else if ((CR38&0xE0) == 0x60)
+		xgi_video_info.hasVB = HASVB_CHRONTEL ;
+            else
+		xgi_video_info.hasVB = HASVB_NONE;
+	}
+        else
+		    XGIfb_get_VB_type();
+
+		    XGIhw_ext.ujVBChipID = VB_CHIP_UNKNOWN;
+
+		    XGIhw_ext.ulExternalChip = 0;
+
+		switch (xgi_video_info.hasVB) {
+		case HASVB_301:
+		        inXGIIDXREG(XGIPART4, 0x01, reg);
+			if (reg >= 0xE0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xD0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+				printk(KERN_INFO "XGIfb: XGI301LV bridge detected (revision 0x%02x)\n",reg);
+	  		}
+			/* else if (reg >= 0xB0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301B;
+				inXGIIDXREG(XGIPART4,0x23,reg1);
+			       printk("XGIfb: XGI301B bridge detected\n");
+			}*/
+			else {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301;
+				printk("XGIfb: XGI301 bridge detected\n");
+			}
+			break;
+		case HASVB_302:
+		        inXGIIDXREG(XGIPART4, 0x01, reg);
+			if (reg >= 0xE0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_302LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xD0) {
+				XGIhw_ext.ujVBChipID = VB_CHIP_301LV;
+				printk(KERN_INFO "XGIfb: XGI302LV bridge detected (revision 0x%02x)\n",reg);
+	  		} else if (reg >= 0xB0) {
+				inXGIIDXREG(XGIPART4,0x23,reg1);
+
+			        XGIhw_ext.ujVBChipID = VB_CHIP_302B;
+
+			} else {
+			        XGIhw_ext.ujVBChipID = VB_CHIP_302;
+				printk(KERN_INFO "XGIfb: XGI302 bridge detected\n");
+			}
+			break;
+		case HASVB_LVDS:
+			XGIhw_ext.ulExternalChip = 0x1;
+			printk(KERN_INFO "XGIfb: LVDS transmitter detected\n");
+			break;
+		case HASVB_TRUMPION:
+			XGIhw_ext.ulExternalChip = 0x2;
+			printk(KERN_INFO "XGIfb: Trumpion Zurac LVDS scaler detected\n");
+			break;
+		case HASVB_CHRONTEL:
+			XGIhw_ext.ulExternalChip = 0x4;
+			printk(KERN_INFO "XGIfb: Chrontel TV encoder detected\n");
+			break;
+		case HASVB_LVDS_CHRONTEL:
+			XGIhw_ext.ulExternalChip = 0x5;
+			printk(KERN_INFO "XGIfb: LVDS transmitter and Chrontel TV encoder detected\n");
+			break;
+ 		default:
+			printk(KERN_INFO "XGIfb: No or unknown bridge type detected\n");
+			break;
+		}
+
+		if (xgi_video_info.hasVB != HASVB_NONE) {
+		    XGIfb_detect_VB();
+    }
+
+		if (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+			if (XGIfb_crt1off)
+				xgi_video_info.disp_state |= DISPMODE_SINGLE;
+			else
+				xgi_video_info.disp_state |= (DISPMODE_MIRROR | DISPTYPE_CRT1);
+		} else {
+			xgi_video_info.disp_state = DISPMODE_SINGLE | DISPTYPE_CRT1;
+		}
+
+		if (xgi_video_info.disp_state & DISPTYPE_LCD) {
+		    if (!enable_dstn) {
+		        inXGIIDXREG(XGICR, IND_XGI_LCD_PANEL, reg);
+			    reg &= 0x0f;
+			    XGIhw_ext.ulCRT2LCDType = XGI310paneltype[reg];
+
+		    } else {
+		        // TW: FSTN/DSTN
+			XGIhw_ext.ulCRT2LCDType = LCD_320x480;
+		    }
+		}
+
+		XGIfb_detectedpdc = 0;
+
+	        XGIfb_detectedlcda = 0xff;
+#ifndef LINUXBIOS
+
+                /* TW: Try to find about LCDA */
+
+        if((XGIhw_ext.ujVBChipID == VB_CHIP_302B) ||
+	       (XGIhw_ext.ujVBChipID == VB_CHIP_301LV) ||
+	       (XGIhw_ext.ujVBChipID == VB_CHIP_302LV))
+	    {
+	       int tmp;
+	       inXGIIDXREG(XGICR,0x34,tmp);
+	       if(tmp <= 0x13)
+	       {
+	          // Currently on LCDA? (Some BIOSes leave CR38)
+	          inXGIIDXREG(XGICR,0x38,tmp);
+		      if((tmp & 0x03) == 0x03)
+		      {
+//		          XGI_Pr.XGI_UseLCDA = TRUE;
+		      }else
+		      {
+		     //  Currently on LCDA? (Some newer BIOSes set D0 in CR35)
+		         inXGIIDXREG(XGICR,0x35,tmp);
+		         if(tmp & 0x01)
+		         {
+//		              XGI_Pr.XGI_UseLCDA = TRUE;
+		           }else
+		           {
+		               inXGIIDXREG(XGICR,0x30,tmp);
+		               if(tmp & 0x20)
+		               {
+		                   inXGIIDXREG(XGIPART1,0x13,tmp);
+			               if(tmp & 0x04)
+			               {
+//			                XGI_Pr.XGI_UseLCDA = TRUE;
+			               }
+		               }
+		           }
+		        }
+	         }
+
+        }
+
+
+#endif
+
+		if (xgifb_mode_idx >= 0)
+			xgifb_mode_idx = XGIfb_validate_mode(xgifb_mode_idx);
+
+		if (xgifb_mode_idx < 0) {
+			switch (xgi_video_info.disp_state & DISPTYPE_DISP2) {
+			   case DISPTYPE_LCD:
+				xgifb_mode_idx = DEFAULT_LCDMODE;
+				if (xgi_video_info.chip == XG21)
+				{
+				    xgifb_mode_idx = XGIfb_GetXG21DefaultLVDSModeIdx();
+				}
+				break;
+			   case DISPTYPE_TV:
+				xgifb_mode_idx = DEFAULT_TVMODE;
+				break;
+			   default:
+				xgifb_mode_idx = DEFAULT_MODE;
+				break;
+			}
+		}
+
+		XGIfb_mode_no = XGIbios_mode[xgifb_mode_idx].mode_no;
+
+
+                if( xgi_video_info.refresh_rate == 0)
+		    xgi_video_info.refresh_rate = 60; /*yilin set default refresh rate */
+	        if(XGIfb_search_refresh_rate(xgi_video_info.refresh_rate) == 0)
+                {
+		    XGIfb_rate_idx = XGIbios_mode[xgifb_mode_idx].rate_idx;
+		    xgi_video_info.refresh_rate = 60;
+	        }
+
+		xgi_video_info.video_bpp = XGIbios_mode[xgifb_mode_idx].bpp;
+		xgi_video_info.video_vwidth = xgi_video_info.video_width = XGIbios_mode[xgifb_mode_idx].xres;
+		xgi_video_info.video_vheight = xgi_video_info.video_height = XGIbios_mode[xgifb_mode_idx].yres;
+		xgi_video_info.org_x = xgi_video_info.org_y = 0;
+		xgi_video_info.video_linelength = xgi_video_info.video_width * (xgi_video_info.video_bpp >> 3);
+		switch(xgi_video_info.video_bpp) {
+        	case 8:
+            		xgi_video_info.DstColor = 0x0000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00000000;
+			xgi_video_info.video_cmap_len = 256;
+            		break;
+        	case 16:
+            		xgi_video_info.DstColor = 0x8000;
+            		xgi_video_info.XGI310_AccelDepth = 0x00010000;
+			xgi_video_info.video_cmap_len = 16;
+            		break;
+        	case 32:
+            		xgi_video_info.DstColor = 0xC000;
+	    		xgi_video_info.XGI310_AccelDepth = 0x00020000;
+			xgi_video_info.video_cmap_len = 16;
+            		break;
+		default:
+			xgi_video_info.video_cmap_len = 16;
+		        printk(KERN_INFO "XGIfb: Unsupported depth %d", xgi_video_info.video_bpp);
+			break;
+    		}
+
+
+
+		printk(KERN_INFO "XGIfb: Default mode is %dx%dx%d (%dHz)\n",
+	       		xgi_video_info.video_width, xgi_video_info.video_height, xgi_video_info.video_bpp,
+			xgi_video_info.refresh_rate);
+
+		default_var.xres = default_var.xres_virtual = xgi_video_info.video_width;
+		default_var.yres = default_var.yres_virtual = xgi_video_info.video_height;
+		default_var.bits_per_pixel = xgi_video_info.video_bpp;
+
+		XGIfb_bpp_to_var(&default_var);
+
+		default_var.pixclock = (u32) (1000000000 /
+				XGIfb_mode_rate_to_dclock(&XGI_Pr, &XGIhw_ext,
+						XGIfb_mode_no, XGIfb_rate_idx));
+
+		if(XGIfb_mode_rate_to_ddata(&XGI_Pr, &XGIhw_ext,
+			 XGIfb_mode_no, XGIfb_rate_idx,
+			 &default_var.left_margin, &default_var.right_margin,
+			 &default_var.upper_margin, &default_var.lower_margin,
+			 &default_var.hsync_len, &default_var.vsync_len,
+			 &default_var.sync, &default_var.vmode)) {
+
+		   if((default_var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+		      default_var.yres <<= 1;
+		      default_var.yres_virtual <<= 1;
+		   } else if((default_var.vmode	& FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
+		      default_var.pixclock >>= 1;
+		      default_var.yres >>= 1;
+		      default_var.yres_virtual >>= 1;
+		   }
+
+	        }
+
+
+#if 0
+#ifdef XGIFB_PAN
+		if(XGIfb_ypan) {
+	    		default_var.yres_virtual =
+				xgi_video_info.heapstart / (default_var.xres * (default_var.bits_per_pixel >> 3));
+	    		if(default_var.yres_virtual <= default_var.yres) {
+	        		default_var.yres_virtual = default_var.yres;
+	    		}
+		}
+#endif
+#endif
+
+
+		xgi_video_info.accel = 0;
+		if(XGIfb_accel) {
+		   xgi_video_info.accel = -1;
+		   default_var.accel_flags |= FB_ACCELF_TEXT;
+		   XGIfb_initaccel();
+		}
+
+		fb_info->flags = FBINFO_FLAG_DEFAULT;
+		fb_info->var = default_var;
+		fb_info->fix = XGIfb_fix;
+		fb_info->par = &xgi_video_info;
+		fb_info->screen_base = xgi_video_info.video_vbase;
+		fb_info->fbops = &XGIfb_ops;
+		XGIfb_get_fix(&fb_info->fix, -1, fb_info);
+		fb_info->pseudo_palette = pseudo_palette;
+
+		fb_alloc_cmap(&fb_info->cmap, 256 , 0);
+
+
+#ifdef CONFIG_MTRR
+		xgi_video_info.mtrr = mtrr_add((unsigned int) xgi_video_info.video_base,
+				(unsigned int) xgi_video_info.video_size,
+				MTRR_TYPE_WRCOMB, 1);
+		if(xgi_video_info.mtrr) {
+			printk(KERN_INFO "XGIfb: Added MTRRs\n");
+		}
+#endif
+
+		if(register_framebuffer(fb_info) < 0)
+    {
+			return -EINVAL;
+    }
+
+		XGIfb_registered = 1;
+
+		printk(KERN_INFO "XGIfb: Installed XGIFB_GET_INFO ioctl (%x)\n", XGIFB_GET_INFO);
+
+/*		printk(KERN_INFO "XGIfb: 2D acceleration is %s, scrolling mode %s\n",
+		     XGIfb_accel ? "enabled" : "disabled",
+		     XGIfb_ypan  ? "ypan" : "redraw");
+*/
+		printk(KERN_INFO "fb%d: %s frame buffer device, Version %d.%d.%02d\n",
+	       		fb_info->node, myid, VER_MAJOR, VER_MINOR, VER_LEVEL);
+
+
+	}
+
+	dumpVGAReg();
+
+	return 0;
+}
+
+
+/*****************************************************/
+/*                PCI DEVICE HANDLING                */
+/*****************************************************/
+
+static void __devexit xgifb_remove(struct pci_dev *pdev)
+{
+	/* Unregister the framebuffer */
+//	if(xgi_video_info.registered) {
+		unregister_framebuffer(fb_info);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+		framebuffer_release(fb_info);
+#else
+		kfree(fb_info);
+#endif
+//	}
+
+	pci_set_drvdata(pdev, NULL);
+
+};
+
+static struct pci_driver xgifb_driver = {
+	.name		= "xgifb",
+	.id_table 	= xgifb_pci_table,
+	.probe 		= xgifb_probe,
+	.remove 	= __devexit_p(xgifb_remove)
+};
+
+XGIINITSTATIC int __init xgifb_init(void)
+{
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("xgifb", &option))
+		return -ENODEV;
+	XGIfb_setup(option);
+#endif
+#endif
+	return(pci_register_driver(&xgifb_driver));
+}
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+#ifndef MODULE
+module_init(xgifb_init);
+#endif
+#endif
+
+/*****************************************************/
+/*                      MODULE                       */
+/*****************************************************/
+
+#ifdef MODULE
+
+static char         *mode = NULL;
+static int          vesa = 0;
+static unsigned int rate = 0;
+static unsigned int crt1off = 1;
+static unsigned int mem = 0;
+static char         *forcecrt2type = NULL;
+static int          forcecrt1 = -1;
+static int          pdc = -1;
+static int          pdc1 = -1;
+static int          noaccel = -1;
+static int          noypan  = -1;
+static int	    nomax = -1;
+static int          userom = -1;
+static int          useoem = -1;
+static char         *tvstandard = NULL;
+static int	    nocrt2rate = 0;
+static int          scalelcd = -1;
+static char	    *specialtiming = NULL;
+static int	    lvdshl = -1;
+static int	    tvxposoffset = 0, tvyposoffset = 0;
+#if !defined(__i386__) && !defined(__x86_64__)
+static int	    resetcard = 0;
+static int	    videoram = 0;
+#endif
+
+MODULE_DESCRIPTION("Z7 Z9 Z9S Z11 framebuffer device driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("XGITECH , Others");
+
+
+
+module_param(mem, int, 0);
+module_param(noaccel, int, 0);
+module_param(noypan, int, 0);
+module_param(nomax, int, 0);
+module_param(userom, int, 0);
+module_param(useoem, int, 0);
+module_param(mode, charp, 0);
+module_param(vesa, int, 0);
+module_param(rate, int, 0);
+module_param(forcecrt1, int, 0);
+module_param(forcecrt2type, charp, 0);
+module_param(scalelcd, int, 0);
+module_param(pdc, int, 0);
+module_param(pdc1, int, 0);
+module_param(specialtiming, charp, 0);
+module_param(lvdshl, int, 0);
+module_param(tvstandard, charp, 0);
+module_param(tvxposoffset, int, 0);
+module_param(tvyposoffset, int, 0);
+module_param(filter, int, 0);
+module_param(nocrt2rate, int, 0);
+#if !defined(__i386__) && !defined(__x86_64__)
+module_param(resetcard, int, 0);
+module_param(videoram, int, 0);
+#endif
+
+
+MODULE_PARM_DESC(mem,
+	"\nDetermines the beginning of the video memory heap in KB. This heap is used\n"
+	  "for video RAM management for eg. DRM/DRI. On 300 series, the default depends\n"
+	  "on the amount of video RAM available. If 8MB of video RAM or less is available,\n"
+	  "the heap starts at 4096KB, if between 8 and 16MB are available at 8192KB,\n"
+	  "otherwise at 12288KB. On 315 and Xabre series, the heap size is 32KB by default.\n"
+	  "The value is to be specified without 'KB' and must match the MaxXFBMem setting\n"
+	  "for XFree86 4.x/X.org 6.7 and later.\n");
+
+MODULE_PARM_DESC(noaccel,
+        "\nIf set to anything other than 0, 2D acceleration will be disabled.\n"
+	  "(default: 0)\n");
+
+MODULE_PARM_DESC(noypan,
+        "\nIf set to anything other than 0, y-panning will be disabled and scrolling\n"
+ 	  "will be performed by redrawing the screen. (default: 0)\n");
+
+MODULE_PARM_DESC(nomax,
+        "\nIf y-panning is enabled, xgifb will by default use the entire available video\n"
+	  "memory for the virtual screen in order to optimize scrolling performance. If\n"
+	  "this is set to anything other than 0, xgifb will not do this and thereby \n"
+	  "enable the user to positively specify a virtual Y size of the screen using\n"
+	  "fbset. (default: 0)\n");
+
+
+
+MODULE_PARM_DESC(mode,
+       "\nSelects the desired default display mode in the format XxYxDepth,\n"
+         "eg. 1024x768x16. Other formats supported include XxY-Depth and\n"
+	 "XxY-Depth@Rate. If the parameter is only one (decimal or hexadecimal)\n"
+	 "number, it will be interpreted as a VESA mode number. (default: 800x600x8)\n");
+
+MODULE_PARM_DESC(vesa,
+       "\nSelects the desired default display mode by VESA defined mode number, eg.\n"
+         "0x117 (default: 0x0103)\n");
+
+
+MODULE_PARM_DESC(rate,
+	"\nSelects the desired vertical refresh rate for CRT1 (external VGA) in Hz.\n"
+	  "If the mode is specified in the format XxY-Depth@Rate, this parameter\n"
+	  "will be ignored (default: 60)\n");
+
+MODULE_PARM_DESC(forcecrt1,
+	"\nNormally, the driver autodetects whether or not CRT1 (external VGA) is \n"
+	  "connected. With this option, the detection can be overridden (1=CRT1 ON,\n"
+	  "0=CRT1 OFF) (default: [autodetected])\n");
+
+MODULE_PARM_DESC(forcecrt2type,
+	"\nIf this option is omitted, the driver autodetects CRT2 output devices, such as\n"
+	  "LCD, TV or secondary VGA. With this option, this autodetection can be\n"
+	  "overridden. Possible parameters are LCD, TV, VGA or NONE. NONE disables CRT2.\n"
+	  "On systems with a SiS video bridge, parameters SVIDEO, COMPOSITE or SCART can\n"
+	  "be used instead of TV to override the TV detection. Furthermore, on systems\n"
+	  "with a SiS video bridge, SVIDEO+COMPOSITE, HIVISION, YPBPR480I, YPBPR480P,\n"
+	  "YPBPR720P and YPBPR1080I are understood. However, whether or not these work\n"
+	  "depends on the very hardware in use. (default: [autodetected])\n");
+
+MODULE_PARM_DESC(scalelcd,
+	"\nSetting this to 1 will force the driver to scale the LCD image to the panel's\n"
+	  "native resolution. Setting it to 0 will disable scaling; LVDS panels will\n"
+	  "show black bars around the image, TMDS panels will probably do the scaling\n"
+	  "themselves. Default: 1 on LVDS panels, 0 on TMDS panels\n");
+
+MODULE_PARM_DESC(pdc,
+        "\nThis is for manually selecting the LCD panel delay compensation. The driver\n"
+	  "should detect this correctly in most cases; however, sometimes this is not\n"
+	  "possible. If you see 'small waves' on the LCD, try setting this to 4, 32 or 24\n"
+	  "on a 300 series chipset; 6 on a 315 series chipset. If the problem persists,\n"
+	  "try other values (on 300 series: between 4 and 60 in steps of 4; on 315 series:\n"
+	  "any value from 0 to 31). (default: autodetected, if LCD is active during start)\n");
+
+MODULE_PARM_DESC(pdc1,
+        "\nThis is same as pdc, but for LCD-via CRT1. Hence, this is for the 315/330\n"
+	  "series only. (default: autodetected if LCD is in LCD-via-CRT1 mode during\n"
+	  "startup) - Note: currently, this has no effect because LCD-via-CRT1 is not\n"
+	  "implemented yet.\n");
+
+MODULE_PARM_DESC(specialtiming,
+	"\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(lvdshl,
+	"\nPlease refer to documentation for more information on this option.\n");
+
+MODULE_PARM_DESC(tvstandard,
+	"\nThis allows overriding the BIOS default for the TV standard. Valid choices are\n"
+	  "pal, ntsc, palm and paln. (default: [auto; pal or ntsc only])\n");
+
+MODULE_PARM_DESC(tvxposoffset,
+	"\nRelocate TV output horizontally. Possible parameters: -32 through 32.\n"
+	  "Default: 0\n");
+
+MODULE_PARM_DESC(tvyposoffset,
+	"\nRelocate TV output vertically. Possible parameters: -32 through 32.\n"
+	  "Default: 0\n");
+
+MODULE_PARM_DESC(filter,
+	"\nSelects TV flicker filter type (only for systems with a SiS301 video bridge).\n"
+	  "(Possible values 0-7, default: [no filter])\n");
+
+MODULE_PARM_DESC(nocrt2rate,
+	"\nSetting this to 1 will force the driver to use the default refresh rate for\n"
+	  "CRT2 if CRT2 type is VGA. (default: 0, use same rate as CRT1)\n");
+
+
+
+
+int __init xgifb_init_module(void)
+{
+        printk("\nXGIfb_init_module");
+	if(mode)
+		XGIfb_search_mode(mode);
+	else if (vesa != -1)
+		XGIfb_search_vesamode(vesa);
+
+        return(xgifb_init());
+}
+
+static void __exit xgifb_remove_module(void)
+{
+	pci_unregister_driver(&xgifb_driver);
+	printk(KERN_DEBUG "xgifb: Module unloaded\n");
+}
+
+module_init(xgifb_init_module);
+module_exit(xgifb_remove_module);
+
+#endif 	   /*  /MODULE  */
+
+EXPORT_SYMBOL(XGI_malloc);
+EXPORT_SYMBOL(XGI_free);
+
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
new file mode 100644
index 0000000..41bf163
--- /dev/null
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -0,0 +1,215 @@
+#ifndef _LINUX_XGIFB
+#define _LINUX_XGIFB
+#include <linux/spinlock.h>
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+#define DISPTYPE_CRT1       0x00000008L
+#define DISPTYPE_CRT2       0x00000004L
+#define DISPTYPE_LCD        0x00000002L
+#define DISPTYPE_TV         0x00000001L
+#define DISPTYPE_DISP1      DISPTYPE_CRT1
+#define DISPTYPE_DISP2      (DISPTYPE_CRT2 | DISPTYPE_LCD | DISPTYPE_TV)
+#define DISPMODE_SINGLE	    0x00000020L
+#define DISPMODE_MIRROR	    0x00000010L
+#define DISPMODE_DUALVIEW   0x00000040L
+
+#define HASVB_NONE      	0x00
+#define HASVB_301       	0x01
+#define HASVB_LVDS      	0x02
+#define HASVB_TRUMPION  	0x04
+#define HASVB_LVDS_CHRONTEL	0x10
+#define HASVB_302       	0x20
+#define HASVB_303       	0x40
+#define HASVB_CHRONTEL  	0x80
+
+#ifndef XGIFB_ID
+#define XGIFB_ID          0x53495346    /* Identify myself with 'XGIF' */
+#endif
+
+typedef enum _XGI_CHIP_TYPE {
+    XGI_VGALegacy = 0,
+    XGI_300,
+    XGI_630,
+    XGI_730,
+    XGI_540,
+    XGI_315H,
+    XGI_315,
+    XGI_315PRO,
+    XGI_550,
+    XGI_640,
+    XGI_740,
+    XGI_650,
+    XGI_650M,
+    XGI_330 = 16,
+    XGI_660,
+    XGI_661,
+    XGI_760,
+    XG40 = 32,
+    XG41,
+    XG42,
+    XG45,
+    XG20 = 48,
+    XG21,
+    XG27,
+    MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+
+typedef enum _TVTYPE {
+	TVMODE_NTSC = 0,
+	TVMODE_PAL,
+	TVMODE_HIVISION,
+	TVTYPE_PALM,	// vicki@030226
+    	TVTYPE_PALN,	// vicki@030226
+    	TVTYPE_NTSCJ,	// vicki@030226
+	TVMODE_TOTAL
+} XGI_TV_TYPE;
+
+
+typedef struct _XGIFB_INFO XGIfb_info;
+struct _XGIFB_INFO {
+
+unsigned long XGIfb_id;
+ 	int    chip_id;			/* PCI ID of detected chip */
+	int    memory;			/* video memory in KB which XGIfb manages */
+	int    heapstart;               /* heap start (= XGIfb "mem" argument) in KB */
+	unsigned char fbvidmode;	/* current XGIfb mode */
+
+	unsigned char XGIfb_version;
+	unsigned char XGIfb_revision;
+	unsigned char XGIfb_patchlevel;
+
+	unsigned char XGIfb_caps;	/* XGIfb capabilities */
+
+	int    XGIfb_tqlen;		/* turbo queue length (in KB) */
+
+	unsigned int XGIfb_pcibus;      /* The card's PCI ID */
+	unsigned int XGIfb_pcislot;
+	unsigned int XGIfb_pcifunc;
+
+	unsigned char XGIfb_lcdpdc;	/* PanelDelayCompensation */
+
+	unsigned char XGIfb_lcda;	/* Detected status of LCDA for low res/text modes */
+
+	char reserved[235]; 		/* for future use */
+};
+
+
+
+
+typedef enum _TVPLUGTYPE {	// vicki@030226
+//	TVPLUG_Legacy = 0,
+//	TVPLUG_COMPOSITE,
+//	TVPLUG_SVIDEO,
+//	TVPLUG_SCART,
+//	TVPLUG_TOTAL
+    	TVPLUG_UNKNOWN = 0,
+    	TVPLUG_COMPOSITE = 1,
+    	TVPLUG_SVIDEO = 2,
+    	TVPLUG_COMPOSITE_AND_SVIDEO = 3,
+    	TVPLUG_SCART = 4,
+    	TVPLUG_YPBPR_525i = 5,
+    	TVPLUG_YPBPR_525P = 6,
+    	TVPLUG_YPBPR_750P = 7,
+    	TVPLUG_YPBPR_1080i = 8,
+	TVPLUG_TOTAL
+} XGI_TV_PLUG;
+
+
+struct mode_info {
+	int    bpp;
+	int    xres;
+	int    yres;
+	int    v_xres;
+	int    v_yres;
+	int    org_x;
+	int    org_y;
+	unsigned int  vrate;
+};
+
+struct ap_data {
+	struct mode_info minfo;
+	unsigned long iobase;
+	unsigned int  mem_size;
+	unsigned long disp_state;
+	XGI_CHIP_TYPE chip;
+	unsigned char hasVB;
+	XGI_TV_TYPE TV_type;
+	XGI_TV_PLUG TV_plug;
+	unsigned long version;
+	char reserved[256];
+};
+
+
+
+/*     If changing this, vgatypes.h must also be changed (for X driver)    */
+
+
+/*
+ * NOTE! The ioctl types used to be "size_t" by mistake, but were
+ * really meant to be __u32. Changed to "__u32" even though that
+ * changes the value on 64-bit architectures, because the value
+ * (with a 4-byte size) is also hardwired in vgatypes.h for user
+ * space exports. So "__u32" is actually more compatible, duh!
+ */
+#define XGIFB_GET_INFO	  	_IOR('n',0xF8,__u32)
+#define XGIFB_GET_VBRSTATUS  	_IOR('n',0xF9,__u32)
+
+
+
+struct video_info{
+        int           chip_id;
+        unsigned int  video_size;
+        unsigned long video_base;
+        char  *       video_vbase;
+        unsigned long mmio_base;
+        char  *       mmio_vbase;
+        unsigned long vga_base;
+        unsigned long mtrr;
+        unsigned long heapstart;
+
+        int    video_bpp;
+        int    video_cmap_len;
+        int    video_width;
+        int    video_height;
+        int    video_vwidth;
+        int    video_vheight;
+        int    org_x;
+        int    org_y;
+        int    video_linelength;
+        unsigned int refresh_rate;
+
+        unsigned long disp_state;
+        unsigned char hasVB;
+        unsigned char TV_type;
+        unsigned char TV_plug;
+
+        XGI_CHIP_TYPE chip;
+        unsigned char revision_id;
+
+        unsigned short DstColor;
+        unsigned long  XGI310_AccelDepth;
+        unsigned long  CommandReg;
+
+        spinlock_t     lockaccel;
+
+        unsigned int   pcibus;
+        unsigned int   pcislot;
+        unsigned int   pcifunc;
+
+        int            accel;
+        unsigned short subsysvendor;
+        unsigned short subsysdevice;
+
+        char reserved[236];
+};
+
+
+extern struct video_info xgi_video_info;
+
+#ifdef __KERNEL__
+//extern void xgi_malloc(struct xgi_memreq *req);
+extern void xgi_free(unsigned long base);
+extern void xgi_dispinfo(struct ap_data *rec);
+#endif
+#endif
diff --git a/drivers/staging/xgifb/osdef.h b/drivers/staging/xgifb/osdef.h
new file mode 100644
index 0000000..4bc7d3a
--- /dev/null
+++ b/drivers/staging/xgifb/osdef.h
@@ -0,0 +1,153 @@
+#ifndef _OSDEF_H_
+#define _OSDEF_H_
+
+/* #define WINCE_HEADER*/
+/*#define WIN2000*/
+/* #define TC */
+#define LINUX_KERNEL
+/* #define LINUX_XF86 */
+
+/**********************************************************************/
+#ifdef LINUX_KERNEL
+//#include <linux/config.h>
+#endif
+
+
+/**********************************************************************/
+#ifdef TC
+#endif
+#ifdef WIN2000
+#endif
+#ifdef WINCE_HEADER
+#endif
+#ifdef LINUX_XF86
+#define LINUX
+#endif
+#ifdef LINUX_KERNEL
+#define LINUX
+#endif
+
+/**********************************************************************/
+#ifdef TC
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef WIN2000
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) MemFill((PVOID) MemoryAddress,(ULONG) MemorySize,(UCHAR) value);
+#endif
+#ifdef WINCE_HEADER
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
+#endif
+#ifdef LINUX_XF86
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
+#endif
+/**********************************************************************/
+
+/**********************************************************************/
+
+#ifdef TC
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef WIN2000
+#define XGI_MemoryCopy(Destination,Soruce,Length)  /*VideoPortMoveMemory((PUCHAR)Destination , Soruce,length);*/
+#endif
+#ifdef WINCE_HEADER
+#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
+#endif
+#ifdef LINUX_XF86
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+#ifdef LINUX_KERNEL
+#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
+#endif
+
+/**********************************************************************/
+
+#ifdef OutPortByte
+#undef OutPortByte
+#endif /* OutPortByte */
+
+#ifdef OutPortWord
+#undef OutPortWord
+#endif /* OutPortWord */
+
+#ifdef OutPortLong
+#undef OutPortLong
+#endif /* OutPortLong */
+
+#ifdef InPortByte
+#undef InPortByte
+#endif /* InPortByte */
+
+#ifdef InPortWord
+#undef InPortWord
+#endif /* InPortWord */
+
+#ifdef InPortLong
+#undef InPortLong
+#endif /* InPortLong */
+
+/**********************************************************************/
+/*  TC                                                                */
+/**********************************************************************/
+
+#ifdef TC
+#define OutPortByte(p,v) outp((unsigned short)(p),(unsigned char)(v))
+#define OutPortWord(p,v) outp((unsigned short)(p),(unsigned short)(v))
+#define OutPortLong(p,v) outp((unsigned short)(p),(unsigned long)(v))
+#define InPortByte(p)    inp((unsigned short)(p))
+#define InPortWord(p)    inp((unsigned short)(p))
+#define InPortLong(p)    ((inp((unsigned short)(p+2))<<16) | inp((unsigned short)(p)))
+#endif
+
+/**********************************************************************/
+/*  LINUX XF86                                                        */
+/**********************************************************************/
+
+#ifdef LINUX_XF86
+#define OutPortByte(p,v) outb((CARD16)(p),(CARD8)(v))
+#define OutPortWord(p,v) outw((CARD16)(p),(CARD16)(v))
+#define OutPortLong(p,v) outl((CARD16)(p),(CARD32)(v))
+#define InPortByte(p)    inb((CARD16)(p))
+#define InPortWord(p)    inw((CARD16)(p))
+#define InPortLong(p)    inl((CARD16)(p))
+#endif
+
+#ifdef LINUX_KERNEL
+#define OutPortByte(p,v) outb((u8)(v),(p))
+#define OutPortWord(p,v) outw((u16)(v),(p))
+#define OutPortLong(p,v) outl((u32)(v),(p))
+#define InPortByte(p)    inb(p)
+#define InPortWord(p)    inw(p)
+#define InPortLong(p)    inl(p)
+#endif
+
+/**********************************************************************/
+/*  WIN 2000                                                          */
+/**********************************************************************/
+
+#ifdef WIN2000
+#define OutPortByte(p,v) VideoPortWritePortUchar ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) VideoPortWritePortUshort((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) VideoPortWritePortUlong ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p)    VideoPortReadPortUchar  ((PUCHAR) (p))
+#define InPortWord(p)    VideoPortReadPortUshort ((PUSHORT) (p))
+#define InPortLong(p)    VideoPortReadPortUlong  ((PULONG) (p))
+#endif
+
+
+/**********************************************************************/
+/*  WIN CE                                                          */
+/**********************************************************************/
+
+#ifdef WINCE_HEADER
+#define OutPortByte(p,v) WRITE_PORT_UCHAR ((PUCHAR) (p), (UCHAR) (v))
+#define OutPortWord(p,v) WRITE_PORT_USHORT((PUSHORT) (p), (USHORT) (v))
+#define OutPortLong(p,v) WRITE_PORT_ULONG ((PULONG) (p), (ULONG) (v))
+#define InPortByte(p)    READ_PORT_UCHAR  ((PUCHAR) (p))
+#define InPortWord(p)    READ_PORT_USHORT ((PUSHORT) (p))
+#define InPortLong(p)    READ_PORT_ULONG  ((PULONG) (p))
+#endif
+#endif // _OSDEF_H_
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
new file mode 100644
index 0000000..17a7ada
--- /dev/null
+++ b/drivers/staging/xgifb/vb_def.h
@@ -0,0 +1,1017 @@
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/xgi/initdef.h,v 1.4 2000/12/02 01:16:17 dawes Exp $ */
+#ifndef _INITDEF_
+#define _INITDEF_
+
+#ifndef NewScratch
+#define NewScratch
+#endif
+/* shampoo */
+#ifdef LINUX_KERNEL
+#define SEQ_ADDRESS_PORT	  0x0014
+#define SEQ_DATA_PORT		  0x0015
+#define MISC_OUTPUT_REG_READ_PORT 0x001C
+#define MISC_OUTPUT_REG_WRITE_PORT 0x0012
+#define GRAPH_DATA_PORT		  0x1F
+#define GRAPH_ADDRESS_PORT	  0x1E
+#define XGI_MASK_DUAL_CHIP	  0x04  /* SR3A */
+#define CRTC_ADDRESS_PORT_COLOR   0x0024
+#define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013
+#define PCI_COMMAND		0x04
+#endif
+/* ~shampoo */
+
+
+#define VB_XGI301	      0x0001  /*301b*/
+#define VB_XGI301B        0x0002
+#define VB_XGI302B        0x0004
+#define VB_XGI301LV     0x0008 /*301lv*/
+#define VB_XGI302LV     0x0010
+#define VB_XGI301C      0x0020       /* for 301C */
+#define  VB_NoLCD        0x8000
+/*end 301b*/
+
+#define VB_YPbPrInfo     0x07          /*301lv*/
+#define VB_YPbPr525i     0x00
+#define VB_YPbPr525p     0x01
+#define VB_YPbPr750p     0x02
+#define VB_YPbPr1080i    0x03
+
+/* #define CRT1Len 17 */
+#define LVDSCRT1Len             15
+#define CHTVRegDataLen          5
+
+/* #define ModeInfoFlag 0x07 */
+/* #define IsTextMode 0x07 */
+/* #define ModeText 0x00 */
+/* #define ModeCGA 0x01 */
+/* #define ModeEGA 0x02 */
+/* #define ModeVGA 0x03 */
+/* #define Mode15Bpp 0x04 */
+/* #define Mode16Bpp 0x05 */
+/* #define Mode24Bpp 0x06 */
+/* #define Mode32Bpp 0x07 */
+
+/* #define DACInfoFlag 0x18 */
+/* #define MemoryInfoFlag 0x1E0 */
+/* #define MemorySizeShift 0x05 */
+
+#define Charx8Dot               0x0200
+#define LineCompareOff          0x0400
+#define CRT2Mode                0x0800
+#define HalfDCLK                0x1000
+#define NoSupportSimuTV         0x2000
+#define DoubleScanMode          0x8000
+
+#define SupportAllCRT2          0x0078
+#define SupportTV               0x0008
+#define SupportHiVisionTV       0x0010
+#define SupportLCD              0x0020
+#define SupportRAMDAC2          0x0040
+#define NoSupportTV             0x0070
+#define NoSupportHiVisionTV     0x0060
+#define NoSupportLCD            0x0058
+#define SupportCHTV 		0x0800
+#define SupportCRT2in301C       0x0100       /* for 301C */
+#define SupportTV1024           0x0800  /*301b*/
+#define SupportYPbPr            0x1000  /*301lv*/
+#define InterlaceMode           0x0080
+#define SyncPP                  0x0000
+#define SyncPN                  0x4000
+#define SyncNP                  0x8000
+/* #define SyncNN 0xc000 */
+#define ECLKindex0              0x0000
+#define ECLKindex1              0x0100
+#define ECLKindex2              0x0200
+#define ECLKindex3              0x0300
+#define ECLKindex4              0x0400
+
+#define SetSimuScanMode         0x0001
+#define SwitchToCRT2            0x0002
+/* #define SetCRT2ToTV 0x009C */
+#define SetCRT2ToAVIDEO         0x0004
+#define SetCRT2ToSVIDEO         0x0008
+#define SetCRT2ToSCART          0x0010
+#define SetCRT2ToLCD            0x0020
+#define SetCRT2ToRAMDAC         0x0040
+#define SetCRT2ToHiVisionTV     0x0080
+#define SetNTSCTV               0x0000
+/* #define SetPALTV 0x0100 */
+#define SetInSlaveMode          0x0200
+#define SetNotSimuMode          0x0400
+#define SetNotSimuTVMode        0x0400
+#define SetDispDevSwitch        0x0800
+#define LoadDACFlag             0x1000
+#define DisableCRT2Display      0x2000
+#define DriverMode              0x4000
+#define HotKeySwitch            0x8000
+#define SetCHTVOverScan  	0x8000
+/* #define SetCRT2ToLCDA 0x8000 301b */
+#define PanelRGB18Bit           0x0100
+#define PanelRGB24Bit           0x0000
+
+#define TVOverScan              0x10
+#define TVOverScanShift         4
+#define ClearBufferFlag         0x20
+#define EnableDualEdge 		0x01		/*301b*/
+#define SetToLCDA		0x02
+
+#define YPbPrModeInfo           0x38
+/* #define YPbPrMode525i 0x00 */
+/* #define YPbPrMode525p 0x08 */
+/* #define YPbPrMode750p 0x10 */
+/* #define YPbPrMode1080i 0x18 */
+
+#define SetSCARTOutput          0x01
+#define BoardTVType             0x02
+#define  EnablePALMN           0x40
+/* #define ProgrammingCRT2 0x01 */
+/* #define TVSimuMode 0x02 */
+/* #define RPLLDIV2XO 0x04 */
+/* #define LCDVESATiming 0x08 */
+/* #define EnableLVDSDDA 0x10 */
+#define SetDispDevSwitchFlag    0x20
+#define CheckWinDos             0x40
+#define SetJDOSMode             0x80
+
+#define Panel320x480              0x07/*fstn*/
+/* [ycchen] 02/12/03 Modify for Multi-Sync. LCD Support */
+#define PanelResInfo            0x1F	/* CR36 Panel Type/LCDResInfo */
+#define PanelRefInfo            0x60
+#define Panel800x600            0x01
+#define Panel1024x768           0x02
+#define Panel1024x768x75        0x22
+#define Panel1280x1024          0x03
+#define Panel1280x1024x75       0x23
+#define Panel640x480            0x04
+#define Panel1024x600           0x05
+#define Panel1152x864           0x06
+#define Panel1280x960           0x07
+#define Panel1152x768           0x08
+#define Panel1400x1050          0x09
+#define Panel1280x768           0x0A
+#define Panel1600x1200          0x0B
+
+#define PanelRef60Hz            0x00
+#define PanelRef75Hz            0x20
+#define LCDRGB18Bit             0x01
+
+#define ExtChipTrumpion         0x06
+#define ExtChipCH7005           0x08
+#define ExtChipMitacTV          0x0a
+#define LCDNonExpanding         0x10
+#define LCDNonExpandingShift    4
+#define LCDSync                 0x20
+#define LCDSyncBit              0xe0
+#define LCDSyncShift            6
+
+/* #define DDC2DelayTime 300 */
+
+#define CRT2DisplayFlag         0x2000
+/* #define LCDDataLen 8 */
+/* #define HiTVDataLen 12 */
+/* #define TVDataLen 16 */
+/* #define SetPALTV 0x0100 */
+#define HalfDCLK                0x1000
+#define NTSCHT                  1716
+#define NTSCVT                  525
+#define PALHT                   1728
+#define PALVT                   625
+#define StHiTVHT                892
+#define StHiTVVT                1126
+#define StHiTextTVHT            1000
+#define StHiTextTVVT            1126
+#define ExtHiTVHT               2100
+#define ExtHiTVVT               1125
+
+#define St750pTVHT              1716
+#define St750pTVVT               525
+#define Ext750pTVHT             1716
+#define Ext750pTVVT              525
+#define St525pTVHT              1716
+#define St525pTVVT               525
+#define Ext525pTVHT             1716
+#define Ext525pTVVT              525
+#define St525iTVHT              1716
+#define St525iTVVT               525
+#define Ext525iTVHT             1716
+#define Ext525iTVVT              525
+
+#define VCLKStartFreq           25
+#define SoftDramType            0x80
+#define VCLK40                  0x04
+
+#define VCLK162             	0x21
+
+#define LCDRGB18Bit             0x01
+#define LoadDACFlag             0x1000
+#define AfterLockCRT2           0x4000
+#define SetCRT2ToAVIDEO         0x0004
+#define SetCRT2ToSCART          0x0010
+#define Ext2StructSize          5
+
+
+#define YPbPr525iVCLK           0x03B
+#define YPbPr525iVCLK_2         0x03A
+
+#define SwitchToCRT2            0x0002
+/* #define LCDVESATiming 0x08 */
+#define SetSCARTOutput          0x01
+#define AVIDEOSense             0x01
+#define SVIDEOSense             0x02
+#define SCARTSense              0x04
+#define LCDSense                0x08
+#define Monitor1Sense           0x20
+#define Monitor2Sense           0x10
+#define HiTVSense               0x40
+#define BoardTVType             0x02
+#define HotPlugFunction         0x08
+#define StStructSize            0x06
+
+
+#define XGI_CRT2_PORT_00        0x00 - 0x030
+#define XGI_CRT2_PORT_04        0x04 - 0x030
+#define XGI_CRT2_PORT_10        0x10 - 0x30
+#define XGI_CRT2_PORT_12        0x12 - 0x30
+#define XGI_CRT2_PORT_14        0x14 - 0x30
+
+
+#define LCDNonExpanding         0x10
+#define ADR_CRT2PtrData         0x20E
+#define offset_Zurac            0x210
+#define ADR_LVDSDesPtrData      0x212
+#define ADR_LVDSCRT1DataPtr     0x214
+#define ADR_CHTVVCLKPtr         0x216
+#define ADR_CHTVRegDataPtr      0x218
+
+#define LVDSDataLen             6
+/* #define EnableLVDSDDA 0x10 */
+/* #define LVDSDesDataLen 3 */
+#define ActiveNonExpanding      0x40
+#define ActiveNonExpandingShift 6
+/* #define ActivePAL 0x20 */
+#define ActivePALShift          5
+/* #define ModeSwitchStatus 0x0F */
+#define SoftTVType              0x40
+#define SoftSettingAddr         0x52
+#define ModeSettingAddr         0x53
+
+/* #define SelectCRT1Rate 0x4 */
+
+#define _PanelType00             0x00
+#define _PanelType01             0x08
+#define _PanelType02             0x10
+#define _PanelType03             0x18
+#define _PanelType04             0x20
+#define _PanelType05             0x28
+#define _PanelType06             0x30
+#define _PanelType07             0x38
+#define _PanelType08             0x40
+#define _PanelType09             0x48
+#define _PanelType0A             0x50
+#define _PanelType0B             0x58
+#define _PanelType0C             0x60
+#define _PanelType0D             0x68
+#define _PanelType0E             0x70
+#define _PanelType0F             0x78
+
+
+#define PRIMARY_VGA       0     /* 1: XGI is primary vga 0:XGI is secondary vga */
+#define BIOSIDCodeAddr          0x235
+#define OEMUtilIDCodeAddr       0x237
+#define VBModeIDTableAddr       0x239
+#define OEMTVPtrAddr            0x241
+#define PhaseTableAddr          0x243
+#define NTSCFilterTableAddr     0x245
+#define PALFilterTableAddr      0x247
+#define OEMLCDPtr_1Addr         0x249
+#define OEMLCDPtr_2Addr         0x24B
+#define LCDHPosTable_1Addr      0x24D
+#define LCDHPosTable_2Addr      0x24F
+#define LCDVPosTable_1Addr      0x251
+#define LCDVPosTable_2Addr      0x253
+#define OEMLCDPIDTableAddr      0x255
+
+#define VBModeStructSize        5
+#define PhaseTableSize          4
+#define FilterTableSize         4
+#define LCDHPosTableSize        7
+#define LCDVPosTableSize        5
+#define OEMLVDSPIDTableSize     4
+#define LVDSHPosTableSize       4
+#define LVDSVPosTableSize       6
+
+#define VB_ModeID               0
+#define VB_TVTableIndex         1
+#define VB_LCDTableIndex        2
+#define VB_LCDHIndex            3
+#define VB_LCDVIndex            4
+
+#define OEMLCDEnable            0x0001
+#define OEMLCDDelayEnable       0x0002
+#define OEMLCDPOSEnable         0x0004
+#define OEMTVEnable             0x0100
+#define OEMTVDelayEnable        0x0200
+#define OEMTVFlickerEnable      0x0400
+#define OEMTVPhaseEnable        0x0800
+#define OEMTVFilterEnable       0x1000
+
+#define OEMLCDPanelIDSupport    0x0080
+
+/* #define LCDVESATiming 0x0001 //LCD Info CR37 */
+/* #define EnableLVDSDDA 0x0002 */
+#define EnableScalingLCD        0x0008
+#define SetPWDEnable            0x0004
+#define SetLCDtoNonExpanding    0x0010
+/* #define SetLCDPolarity 0x00E0 */
+#define SetLCDDualLink          0x0100
+#define SetLCDLowResolution     0x0200
+#define SetLCDStdMode           0x0400
+#define SetTVStdMode            0x0200
+#define SetTVLowResolution      0x0400
+/* =============================================================
+   for 310
+============================================================== */
+#define SoftDRAMType        0x80
+#define SoftSetting_OFFSET  0x52
+#define SR07_OFFSET  0x7C
+#define SR15_OFFSET  0x7D
+#define SR16_OFFSET  0x81
+#define SR17_OFFSET  0x85
+#define SR19_OFFSET  0x8D
+#define SR1F_OFFSET  0x99
+#define SR21_OFFSET  0x9A
+#define SR22_OFFSET  0x9B
+#define SR23_OFFSET  0x9C
+#define SR24_OFFSET  0x9D
+#define SR25_OFFSET  0x9E
+#define SR31_OFFSET  0x9F
+#define SR32_OFFSET  0xA0
+#define SR33_OFFSET  0xA1
+
+#define CR40_OFFSET  0xA2
+#define SR25_1_OFFSET  0xF6
+#define CR49_OFFSET  0xF7
+
+#define VB310Data_1_2_Offset  0xB6
+#define VB310Data_4_D_Offset  0xB7
+#define VB310Data_4_E_Offset  0xB8
+#define VB310Data_4_10_Offset 0xBB
+
+#define RGBSenseDataOffset    0xBD
+#define YCSenseDataOffset     0xBF
+#define VideoSenseDataOffset  0xC1
+#define OutputSelectOffset    0xF3
+
+#define ECLK_MCLK_DISTANCE  0x14
+#define VBIOSTablePointerStart    0x200
+#define StandTablePtrOffset       VBIOSTablePointerStart+0x02
+#define EModeIDTablePtrOffset     VBIOSTablePointerStart+0x04
+#define CRT1TablePtrOffset        VBIOSTablePointerStart+0x06
+#define ScreenOffsetPtrOffset     VBIOSTablePointerStart+0x08
+#define VCLKDataPtrOffset         VBIOSTablePointerStart+0x0A
+#define MCLKDataPtrOffset         VBIOSTablePointerStart+0x0E
+#define CRT2PtrDataPtrOffset      VBIOSTablePointerStart+0x10
+#define TVAntiFlickPtrOffset      VBIOSTablePointerStart+0x12
+#define TVDelayPtr1Offset         VBIOSTablePointerStart+0x14
+#define TVPhaseIncrPtr1Offset     VBIOSTablePointerStart+0x16
+#define TVYFilterPtr1Offset       VBIOSTablePointerStart+0x18
+#define LCDDelayPtr1Offset        VBIOSTablePointerStart+0x20
+#define TVEdgePtr1Offset          VBIOSTablePointerStart+0x24
+#define CRT2Delay1Offset          VBIOSTablePointerStart+0x28
+#define LCDDataDesOffset     VBIOSTablePointerStart-0x02
+#define LCDDataPtrOffset          VBIOSTablePointerStart+0x2A
+#define LCDDesDataPtrOffset     VBIOSTablePointerStart+0x2C
+#define LCDDataList		VBIOSTablePointerStart+0x22	/* add for GetLCDPtr */
+#define TVDataList		VBIOSTablePointerStart+0x36	/* add for GetTVPtr */
+/*  */
+/* Modify from 310.inc */
+/*  */
+/*  */
+
+
+#define		ShowMsgFlag                  0x20               /* SoftSetting */
+#define		ShowVESAFlag                 0x10
+#define		HotPlugFunction              0x08
+#define		ModeSoftSetting              0x04
+#define		TVSoftSetting                0x02
+#define		LCDSoftSetting               0x01
+
+#define		GatingCRTinLCDA              0x10
+#define		SetHiTVOutput                0x08
+#define		SetYPbPrOutput               0x04
+#define		BoardTVType                  0x02
+#define		SetSCARTOutput               0x01
+
+#define		ModeSettingYPbPr             0x02               /* TVModeSetting, Others as same as CR30 */
+
+/* TVModeSetting same as CR35 */
+
+/* LCDModeSetting same as CR37 */
+
+#define		EnableNewTVFont              0x10               /* MiscCapability */
+
+#define		EnableLCDOutput              0x80               /* LCDCfgSetting */
+
+#define		SoftDRAMType                 0x80               /* DRAMSetting */
+#define		SoftDRAMConfig               0x40
+#define		MosSelDRAMType               0x20
+#define		SDRAM                        000h
+#define		SGRAM                        0x01
+#define		ESDRAM                       0x02
+
+#define		EnableAGPCfgSetting          0x01               /* AGPCfgSetting */
+
+/* ---------------- SetMode Stack */
+#define		CRT1Len                      15
+#define		VCLKLen                      4
+#define		DefThreshold                 0x0100
+#define		ExtRegsSize                  (57+8+37+70+63+28+768+1)/64+1
+
+#define		VGA_XGI315                   0x0001       /* VGA Type Info */
+#define		VGA_SNewis315e                  0x0002       /* 315 series */
+#define		VGA_XGI550                   0x0004
+#define		VGA_XGI640                   0x0008
+#define		VGA_XGI740                   0x0010
+#define		VGA_XGI650                   0x0020
+#define		VGA_XGI650M                  0x0040
+#define		VGA_XGI651                   0x0080
+#define		VGA_XGI340                   0x0001       /* 340 series */
+#define		VGA_XGI330                   0x0001       /* 330 series */
+#define		VGA_XGI660                   0x0001       /* 660 series */
+
+#define		VB_XGI301                    0x0001       /* VB Type Info */
+#define		VB_XGI301B                   0x0002       /* 301 series */
+#define		VB_XGI302B                   0x0004
+#define		VB_NoLCD                     0x8000
+#define		VB_XGI301LV                  0x0008
+#define		VB_XGI302LV                  0x0010
+#define		VB_LVDS_NS                   0x0001       /* 3rd party chip */
+#define		VB_CH7017                    0x0002
+#define         VB_CH7007                    0x0080       /* [Billy] 07/05/03 */
+/* #define VB_LVDS_SI 0x0004 */
+
+#define		ModeInfoFlag                 0x0007
+#define		IsTextMode                   0x0007
+#define		ModeText                     0x0000
+#define		ModeCGA                      0x0001
+#define		ModeEGA                      0x0002       /* 16 colors mode */
+#define		ModeVGA                      0x0003       /* 256 colors mode */
+#define		Mode15Bpp                    0x0004       /* 15 Bpp Color Mode */
+#define		Mode16Bpp                    0x0005       /* 16 Bpp Color Mode */
+#define		Mode24Bpp                    0x0006       /* 24 Bpp Color Mode */
+#define		Mode32Bpp                    0x0007       /* 32 Bpp Color Mode */
+
+#define		DACInfoFlag                  0x0018
+#define		MONODAC                      0x0000
+#define		CGADAC                       0x0008
+#define		EGADAC                       0x0010
+#define		VGADAC                       0x0018
+
+#define		MemoryInfoFlag               0x01e0
+#define		MemorySizeShift              5
+#define		Need1MSize                   0x0000
+#define		Need2MSize                   0x0020
+#define		Need4MSize                   0x0060
+#define		Need8MSize                   0x00e0
+#define		Need16MSize                  0x01e0
+
+#define		Charx8Dot                    0x0200
+#define		LineCompareOff               0x0400
+#define		CRT2Mode                     0x0800
+#define		HalfDCLK                     0x1000
+#define		NoSupportSimuTV              0x2000
+#define		DoubleScanMode               0x8000
+
+/* -------------- Ext_InfoFlag */
+#define		SupportModeInfo              0x0007
+#define		Support256                   0x0003
+#define		Support15Bpp                 0x0004
+#define		Support16Bpp                 0x0005
+#define		Support24Bpp                 0x0006
+#define		Support32Bpp                 0x0007
+
+#define		SupportAllCRT2               0x0078
+#define		SupportTV                    0x0008
+#define		SupportHiVisionTV            0x0010
+#define		SupportLCD                   0x0020
+#define		SupportRAMDAC2               0x0040
+#define		NoSupportTV                  0x0070
+#define		NoSupportHiVisionTV          0x0060
+#define		NoSupportLCD                 0x0058
+#define		SupportTV1024                0x0800       /* 301btest */
+#define		SupportYPbPr                 0x1000       /* 301lv */
+#define		InterlaceMode                0x0080
+#define		SyncPP                       0x0000
+#define		SyncPN                       0x4000
+#define		SyncNP                       0x8000
+#define		SyncNN                       0xC000
+
+/* -------------- SetMode Stack/Scratch */
+#define		SetSimuScanMode              0x0001       /* VBInfo/CR30 & CR31 */
+#define		SwitchToCRT2                 0x0002
+#define		SetCRT2ToTV1                 0x009C
+#define		SetCRT2ToTV                  0x089C
+#define		SetCRT2ToAVIDEO              0x0004
+#define		SetCRT2ToSVIDEO              0x0008
+#define		SetCRT2ToSCART               0x0010
+#define		SetCRT2ToLCD                 0x0020
+#define		SetCRT2ToRAMDAC              0x0040
+#define		SetCRT2ToHiVisionTV          0x0080
+#define		SetCRT2ToLCDA                0x0100
+#define		SetInSlaveMode               0x0200
+#define		SetNotSimuMode               0x0400
+#define		HKEventMode                  0x0800
+#define		SetCRT2ToYPbPr               0x0800
+#define		LoadDACFlag                  0x1000
+#define		DisableCRT2Display           0x2000
+#define		DriverMode                   0x4000
+#define		SetCRT2ToDualEdge            0x8000
+#define		HotKeySwitch                 0x8000
+
+#define		ProgrammingCRT2              0x0001       /* Set Flag */
+#define		EnableVCMode                 0x0002
+#define		SetHKEventMode               0x0004
+#define		ReserveTVOption              0x0008
+#define		DisableRelocateIO            0x0010
+#define		Win9xDOSMode                 0x0020
+#define		JDOSMode                     0x0040
+/* #define SetWin9xforJap 0x0080 // not used now */
+/* #define SetWin9xforKorea 0x0100 // not used now */
+#define		GatingCRT                    0x0800
+#define		DisableChB                   0x1000
+#define		EnableChB                    0x2000
+#define		DisableChA                   0x4000
+#define		EnableChA                    0x8000
+
+#define		SetNTSCTV                    0x0000       /* TV Info */
+#define		SetPALTV                     0x0001
+#define		SetNTSCJ                     0x0002
+#define		SetPALMTV                    0x0004
+#define		SetPALNTV                    0x0008
+#define		SetCHTVUnderScan             0x0000
+/* #define SetCHTVOverScan 0x0010 */
+#define		SetYPbPrMode525i             0x0020
+#define		SetYPbPrMode525p             0x0040
+#define		SetYPbPrMode750p             0x0080
+#define		SetYPbPrMode1080i            0x0100
+#define		SetTVStdMode                 0x0200
+#define		SetTVLowResolution           0x0400
+#define		SetTVSimuMode                0x0800
+#define		TVSimuMode                   0x0800
+#define		RPLLDIV2XO                   0x1000
+#define		NTSC1024x768                 0x2000
+#define		SetTVLockMode                0x4000
+
+#define		LCDVESATiming                0x0001       /* LCD Info/CR37 */
+#define		EnableLVDSDDA                0x0002
+#define		EnableScalingLCD             0x0008
+#define		SetPWDEnable                 0x0004
+#define		SetLCDtoNonExpanding         0x0010
+#define		SetLCDPolarity               0x00e0
+#define		SetLCDDualLink               0x0100
+#define		SetLCDLowResolution          0x0200
+#define		SetLCDStdMode                0x0400
+
+#define		DefaultLCDCap                0x80ea       /* LCD Capability shampoo */
+#define		RLVDSDHL00                   0x0000
+#define		RLVDSDHL01                   0x0001
+#define		RLVDSDHL10                   0x0002       /* default */
+#define		RLVDSDHL11                   0x0003
+#define		EnableLCD24bpp               0x0004       /* default */
+#define		DisableLCD24bpp              0x0000
+#define		RLVDSClkSFT0                 0x0000
+#define		RLVDSClkSFT1                 0x0008       /* default */
+#define		EnableLVDSDCBal              0x0010
+#define		DisableLVDSDCBal             0x0000       /* default */
+#define		SinglePolarity               0x0020       /* default */
+#define		MultiPolarity                0x0000
+#define		LCDPolarity                  0x00c0       /* default: SyncNN */
+#define		LCDSingleLink                0x0000       /* default */
+#define		LCDDualLink                  0x0100
+#define		EnableSpectrum               0x0200
+#define		DisableSpectrum              0x0000       /* default */
+#define		PWDEnable                    0x0400
+#define		PWDDisable                   0x0000       /* default */
+#define		PWMEnable                    0x0800
+#define		PWMDisable                   0x0000       /* default */
+#define		EnableVBCLKDRVLOW            0x4000
+#define		EnableVBCLKDRVHigh           0x0000       /* default */
+#define		EnablePLLSPLOW               0x8000
+#define		EnablePLLSPHigh              0x0000       /* default */
+
+#define		LCDBToA                      0x20               /* LCD SetFlag */
+#define		StLCDBToA                    0x40
+#define		LockLCDBToA                  0x80
+#define 	LCDToFull             	     0x10
+#define		AVIDEOSense                  0x01               /* CR32 */
+#define		SVIDEOSense                  0x02
+#define		SCARTSense                   0x04
+#define		LCDSense                     0x08
+#define		Monitor2Sense                0x10
+#define		Monitor1Sense                0x20
+#define		HiTVSense                    0x40
+
+#ifdef                   NewScratch
+#define		YPbPrSense                   0x80    /* NEW SCRATCH */
+#endif
+
+#define		TVSense                      0xc7
+
+#define		TVOverScan                   0x10               /* CR35 */
+#define		TVOverScanShift              4
+
+#ifdef                   NewScratch
+#define		NTSCMode                     0x00
+#define		PALMode                      0x00
+#define		NTSCJMode                    0x02
+#define		PALMNMode                    0x0c
+#define		YPbPrMode                    0xe0
+#define		YPbPrMode525i                0x00
+#define		YPbPrMode525p                0x20
+#define		YPbPrMode750p                0x40
+#define		YPbPrMode1080i               0x60
+#else                    /* Old Scratch */
+#define		ClearBufferFlag              0x20
+#endif
+
+
+#define		LCDRGB18Bit                  0x01               /* CR37 */
+#define		LCDNonExpanding              0x10
+#define		LCDNonExpandingShift         4
+#define		LCDSync                      0x20
+#define		LCDSyncBit                   0xe0               /* H/V polarity & sync ID */
+#define		LCDSyncShift                 6
+
+#ifdef                   NewScratch
+#define		ScalingLCD                   0x08
+#else                    /* Old Scratch */
+#define		ExtChipType                  0x0e
+#define		ExtChip301                   0x02
+#define		ExtChipLVDS                  0x04
+#define		ExtChipCH7019                0x06
+#define		ScalingLCD                   0x10
+#endif
+
+#define		EnableDualEdge               0x01               /* CR38 */
+#define		SetToLCDA                    0x02
+#ifdef                   NewScratch
+#define		SetYPbPr                     0x04
+#define		DisableChannelA              0x08
+#define		DisableChannelB              0x10
+#define		ExtChipType                  0xe0
+#define		ExtChip301                   0x20
+#define		ExtChipLVDS                  0x40
+#define		ExtChipCH7019                0x60
+#else                    /* Old Scratch */
+#define		YPbPrSense                   0x04
+#define		SetYPbPr                     0x08
+#define		YPbPrMode                    0x30
+#define		YPbPrMode525i                0x00
+#define		YPbPrMode525p                0x10
+#define		YPbPrMode750p                0x20
+#define		YPbPrMode1080i               0x30
+#define		PALMNMode                    0xc0
+#endif
+
+#define		BacklightControlBit          0x01               /* CR3A */
+#define		Win9xforJap                  0x40
+#define		Win9xforKorea                0x80
+
+#define		ForceMDBits                  0x07               /* CR3B */
+#define		ForceMD_JDOS                 0x00
+#define		ForceMD_640x400T             0x01
+#define		ForceMD_640x350T             0x02
+#define		ForceMD_720x400T             0x03
+#define		ForceMD_640x480E             0x04
+#define		ForceMD_640x400E             0x05
+#define		ForceP1Bit                   0x10
+#define		ForceP2Bit                   0x20
+#define		EnableForceMDinBIOS          0x40
+#define		EnableForceMDinDrv           0x80
+
+#ifdef                   NewScratch                      /* New Scratch */
+/* ---------------------- VUMA Information */
+#define		LCDSettingFromCMOS           0x04               /* CR3C */
+#define		TVSettingFromCMOS            0x08
+#define		DisplayDeviceFromCMOS        0x10
+#define		HKSupportInSBIOS             0x20
+#define		OSDSupportInSBIOS            0x40
+#define		DisableLogo                  0x80
+
+/* ---------------------- HK Evnet Definition */
+#define		HKEvent                      0x0f               /* CR3D */
+#define		HK_ModeSwitch                0x01
+#define		HK_Expanding                 0x02
+#define		HK_OverScan                  0x03
+#define		HK_Brightness                0x04
+#define		HK_Contrast                  0x05
+#define		HK_Mute                      0x06
+#define		HK_Volume                    0x07
+#define		ModeSwitchStatus             0xf0
+#define		ActiveCRT1                   0x10
+#define		ActiveLCD                    0x0020
+#define		ActiveTV                     0x40
+#define		ActiveCRT2                   0x80
+
+#define		TVSwitchStatus               0x1f               /* CR3E */
+#define		ActiveAVideo                 0x01
+#define		ActiveSVideo                 0x02
+#define		ActiveSCART                  0x04
+#define		ActiveHiTV                   0x08
+#define		ActiveYPbPr                  0x10
+
+#define		EnableHKEvent                0x01               /* CR3F */
+#define		EnableOSDEvent               0x02
+#define		StartOSDEvent                0x04
+#define		IgnoreHKEvent                0x08
+#define		IgnoreOSDEvent               0x10
+#else                    /* Old Scratch */
+#define		OSD_SBIOS                    0x02       /* SR17 */
+#define		DisableLogo                  0x04
+#define		SelectKDOS                   0x08
+#define		KorWinMode                   0x10
+#define		KorMode3Bit                  0x0020
+#define		PSCCtrlBit                  0x40
+#define		NPSCCtrlBitShift             6
+#define		BlueScreenBit                0x80
+
+#define		HKEvent                      0x0f       /* CR79 */
+#define		HK_ModeSwitch                0x01
+#define		HK_Expanding                 0x02
+#define		HK_OverScan                  0x03
+#define		HK_Brightness                0x04
+#define		HK_Contrast                  0x05
+#define		HK_Mute                      0x06
+#define		HK_Volume                    0x07
+#define		ActivePAL                    0x0020
+#define		ActivePALShift               5
+#define		ActiveNonExpanding           0x40
+#define		ActiveNonExpandingShift      6
+#define		ActiveOverScan               0x80
+#define		ActiveOverScanShift          7
+
+#define		ModeSwitchStatus             0x0b       /* SR15 */
+#define		ActiveCRT1                   0x01
+#define		ActiveLCD                    0x02
+#define		ActiveCRT2                   0x08
+
+#define		TVSwitchStatus               0xf0       /* SR16 */
+#define		TVConfigShift                3
+#define		ActiveTV                     0x01
+#define		ActiveYPbPr                  0x04
+#define		ActiveAVideo                 0x10
+#define		ActiveSVideo                 0x0020
+#define		ActiveSCART                  0x40
+#define		ActiveHiTV                   0x80
+
+#define		EnableHKEvent                0x01       /* CR7A */
+#define		EnableOSDEvent               0x02
+#define		StartOSDEvent                0x04
+#define		CMOSSupport                  0x08
+#define		HotKeySupport                0x10
+#define		IngoreHKOSDEvent             0x20
+#endif
+
+/* //------------- Misc. Definition */
+#define		SelectCRT1Rate               00h
+/* #define SelectCRT2Rate 04h */
+
+#define		DDC1DelayTime                1000
+#ifdef           TRUMPION
+#define		DDC2DelayTime                15
+#else
+#define		DDC2DelayTime                150
+#endif
+
+#define		R_FACTOR                     04Dh
+#define		G_FACTOR                     097h
+#define		B_FACTOR                     01Ch
+/* --------------------------------------------------------- */
+/* translated from asm code 301def.h */
+/*  */
+/* --------------------------------------------------------- */
+#define		LCDDataLen                   8
+#define		HiTVDataLen                  12
+#define		TVDataLen                    12
+#define		LVDSCRT1Len_H                8
+#define		LVDSCRT1Len_V                7
+#define		LVDSDataLen                  6
+#define		LVDSDesDataLen               6
+#define		LCDDesDataLen                6
+#define		LVDSDesDataLen2              8
+#define		LCDDesDataLen2               8
+#define		CHTVRegLen                   16
+#define		CHLVRegLen                   12
+
+#define		StHiTVHT                     892
+#define		StHiTVVT                     1126
+#define		StHiTextTVHT                 1000
+#define		StHiTextTVVT                 1126
+#define		ExtHiTVHT                    2100
+#define		ExtHiTVVT                    1125
+#define		NTSCHT                       1716
+#define		NTSCVT                        525
+#define		NTSC1024x768HT               1908
+#define		NTSC1024x768VT                525
+#define		PALHT                        1728
+#define		PALVT                         625
+
+#define		YPbPrTV525iHT                1716            /* YPbPr */
+#define		YPbPrTV525iVT                 525
+#define		YPbPrTV525pHT                1716
+#define		YPbPrTV525pVT                 525
+#define		YPbPrTV750pHT                1650
+#define		YPbPrTV750pVT                 750
+
+#define		CRT2VCLKSel                  0xc0
+
+#define		CRT2Delay1      	     0x04            /* XGI301 */
+#define		CRT2Delay2      	     0x0A            /* 301B,302 */
+
+
+#define		VCLK25_175           0x00
+#define		VCLK28_322           0x01
+#define		VCLK31_5             0x02
+#define		VCLK36               0x03
+#define		VCLK40               0x04
+#define		VCLK43_163           0x05
+#define		VCLK44_9             0x06
+#define		VCLK49_5             0x07
+#define		VCLK50               0x08
+#define		VCLK52_406           0x09
+#define		VCLK56_25            0x0A
+#define		VCLK65               0x0B
+#define		VCLK67_765           0x0C
+#define		VCLK68_179           0x0D
+#define		VCLK72_852           0x0E
+#define		VCLK75               0x0F
+#define		VCLK75_8             0x10
+#define		VCLK78_75            0x11
+#define		VCLK79_411           0x12
+#define		VCLK83_95            0x13
+#define		VCLK84_8             0x14
+#define		VCLK86_6             0x15
+#define		VCLK94_5             0x16
+#define		VCLK104_998          0x17
+#define		VCLK105_882          0x18
+#define		VCLK108_2            0x19
+#define		VCLK109_175          0x1A
+#define		VCLK113_309          0x1B
+#define		VCLK116_406          0x1C
+#define		VCLK132_258          0x1D
+#define		VCLK135_5            0x1E
+#define		VCLK139_054          0x1F
+#define		VCLK157_5            0x20
+#define		VCLK162              0x21
+#define		VCLK175              0x22
+#define		VCLK189              0x23
+#define		VCLK194_4            0x24
+#define		VCLK202_5            0x25
+#define		VCLK229_5            0x26
+#define		VCLK234              0x27
+#define		VCLK252_699          0x28
+#define		VCLK254_817          0x29
+#define		VCLK265_728          0x2A
+#define		VCLK266_952          0x2B
+#define		VCLK269_655          0x2C
+#define		VCLK272_042          0x2D
+#define		VCLK277_015          0x2E
+#define		VCLK286_359          0x2F
+#define		VCLK291_132          0x30
+#define		VCLK291_766          0x31
+#define		VCLK309_789          0x32
+#define		VCLK315_195          0x33
+#define		VCLK323_586          0x34
+#define		VCLK330_615          0x35
+#define		VCLK332_177          0x36
+#define		VCLK340_477          0x37
+#define		VCLK375_847          0x38
+#define		VCLK388_631          0x39
+#define		VCLK125_999          0x51
+#define		VCLK148_5            0x52
+#define		VCLK178_992          0x54
+#define		VCLK217_325          0x55
+#define		VCLK299_505          0x56
+#define		YPbPr750pVCLK        0x57
+
+#define		TVVCLKDIV2              0x3A
+#define		TVVCLK                  0x3B
+#define		HiTVVCLKDIV2          0x3C
+#define		HiTVVCLK              0x3D
+#define		HiTVSimuVCLK          0x3E
+#define		HiTVTextVCLK          0x3F
+#define		VCLK39_77              0x40
+/* #define YPbPr750pVCLK 0x0F */
+#define		YPbPr525pVCLK           0x3A
+/* #define ;;YPbPr525iVCLK 0x3B */
+/* #define ;;YPbPr525iVCLK_2 0x3A */
+#define		NTSC1024VCLK         0x41
+#define		VCLK25_175_41        0x42                  /* ; ScaleLCD */
+#define		VCLK25_175_42        0x43
+#define		VCLK28_322_43        0x44
+#define		VCLK40_44            0x45
+#define		VCLKQVGA_1           0x46                   /* ; QVGA */
+#define		VCLKQVGA_2           0x47
+#define		VCLKQVGA_3           0x48
+#define		VCLK35_2             0x49                    /* ; 800x480 */
+#define		VCLK122_61           0x4A
+#define		VCLK80_350           0x4B
+#define		VCLK107_385          0x4C
+
+#define		CHTVVCLK30_2         0x50                 /* ;;CHTV */
+#define		CHTVVCLK28_1         0x51
+#define		CHTVVCLK43_6         0x52
+#define		CHTVVCLK26_4         0x53
+#define		CHTVVCLK24_6         0x54
+#define		CHTVVCLK47_8         0x55
+#define		CHTVVCLK31_5         0x56
+#define		CHTVVCLK26_2         0x57
+#define		CHTVVCLK39           0x58
+#define		CHTVVCLK36           0x59
+
+#define		CH7007TVVCLK30_2     0x00                 /* [Billy] 2007/05/18 For CH7007 */
+#define		CH7007TVVCLK28_1     0x01
+#define		CH7007TVVCLK43_6     0x02
+#define		CH7007TVVCLK26_4     0x03
+#define		CH7007TVVCLK24_6     0x04
+#define		CH7007TVVCLK47_8     0x05
+#define		CH7007TVVCLK31_5     0x06
+#define		CH7007TVVCLK26_2     0x07
+#define		CH7007TVVCLK39       0x08
+#define		CH7007TVVCLK36       0x09
+
+#define		RES320x200                   0x00
+#define		RES320x240                   0x01
+#define		RES400x300                   0x02
+#define		RES512x384                   0x03
+#define		RES640x400                   0x04
+#define		RES640x480x60                0x05
+#define		RES640x480x72                0x06
+#define		RES640x480x75                0x07
+#define		RES640x480x85                0x08
+#define		RES640x480x100               0x09
+#define		RES640x480x120               0x0A
+#define		RES640x480x160               0x0B
+#define		RES640x480x200               0x0C
+#define		RES800x600x56                0x0D
+#define		RES800x600x60                0x0E
+#define		RES800x600x72                0x0F
+#define		RES800x600x75                0x10
+#define		RES800x600x85                0x11
+#define		RES800x600x100               0x12
+#define		RES800x600x120               0x13
+#define		RES800x600x160               0x14
+#define		RES1024x768x43               0x15
+#define		RES1024x768x60               0x16
+#define		RES1024x768x70               0x17
+#define		RES1024x768x75               0x18
+#define		RES1024x768x85               0x19
+#define		RES1024x768x100              0x1A
+#define		RES1024x768x120              0x1B
+#define		RES1280x1024x43              0x1C
+#define		RES1280x1024x60              0x1D
+#define		RES1280x1024x75              0x1E
+#define		RES1280x1024x85              0x1F
+#define		RES1600x1200x60              0x20
+#define		RES1600x1200x65              0x21
+#define		RES1600x1200x70              0x22
+#define		RES1600x1200x75              0x23
+#define		RES1600x1200x85              0x24
+#define		RES1600x1200x100             0x25
+#define		RES1600x1200x120             0x26
+#define		RES1920x1440x60              0x27
+#define		RES1920x1440x65              0x28
+#define		RES1920x1440x70              0x29
+#define		RES1920x1440x75              0x2A
+#define		RES1920x1440x85              0x2B
+#define		RES1920x1440x100             0x2C
+#define		RES2048x1536x60              0x2D
+#define		RES2048x1536x65              0x2E
+#define		RES2048x1536x70              0x2F
+#define		RES2048x1536x75              0x30
+#define		RES2048x1536x85              0x31
+#define		RES800x480x60                0x32
+#define		RES800x480x75                0x33
+#define		RES800x480x85                0x34
+#define		RES1024x576x60               0x35
+#define		RES1024x576x75               0x36
+#define		RES1024x576x85               0x37
+#define		RES1280x720x60               0x38
+#define		RES1280x720x75               0x39
+#define		RES1280x720x85               0x3A
+#define		RES1280x960x60               0x3B
+#define		RES720x480x60                0x3C
+#define		RES720x576x56                0x3D
+#define		RES856x480x79I               0x3E
+#define		RES856x480x60                0x3F
+#define		RES1280x768x60               0x40
+#define		RES1400x1050x60              0x41
+#define		RES1152x864x60               0x42
+#define		RES1152x864x75               0x43
+#define		RES1024x768x160              0x44
+#define		RES1280x960x75               0x45
+#define		RES1280x960x85               0x46
+#define		RES1280x960x120              0x47
+
+#define 	LFBDRAMTrap                  0x30
+#endif
diff --git a/drivers/staging/xgifb/vb_ext.c b/drivers/staging/xgifb/vb_ext.c
new file mode 100644
index 0000000..49b39ee
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.c
@@ -0,0 +1,1370 @@
+#include "osdef.h"
+
+
+
+
+#ifdef WIN2000
+
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif /* WIN2000 */
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <asm/io.h>
+#include <linux/types.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_ext.h"
+extern   UCHAR XGI330_SoftSetting;
+extern   UCHAR XGI330_OutputSelect;
+extern   USHORT XGI330_RGBSenseData2;
+extern   USHORT XGI330_YCSenseData2;
+extern   USHORT XGI330_VideoSenseData2;
+#ifdef WIN2000
+extern   UCHAR SenseCHTV(PHW_DEVICE_EXTENSION pHWDE);       /* 2007/05/17 Billy */
+#endif
+void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+BOOLEAN  XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGINew_GetLCDDDCInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+BOOLEAN  XGINew_BridgeIsEnable(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo );
+BOOLEAN  XGINew_Sense(USHORT tempbx,USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+
+/**************************************************************
+	Dynamic Sense
+*************************************************************/
+
+void XGI_WaitDisplay(void);
+BOOLEAN XGI_Is301C(PVB_DEVICE_INFO);
+BOOLEAN XGI_Is301LV(PVB_DEVICE_INFO);
+
+#ifdef WIN2000
+UCHAR XGI_SenseLCD(PHW_DEVICE_EXTENSION, PVB_DEVICE_INFO);
+UCHAR XGI_GetLCDDDCInfo(PHW_DEVICE_EXTENSION,PVB_DEVICE_INFO);
+
+extern BOOL bGetDdcInfo(
+PHW_DEVICE_EXTENSION  pHWDE,
+ULONG                 ulWhichOne,
+PUCHAR                pjQueryBuffer,
+ULONG                 ulBufferSize
+   );
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Is301B */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Is301B( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT flag ;
+
+    flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+
+    if ( flag > 0x0B0 )
+        return( 0 ) ;	/* 301b */
+    else
+        return( 1 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301C */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301C( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) & 0xF0 ) == 0xC0 )
+        return( 1 ) ;
+
+    if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+    {
+        if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xE0 )
+            return( 1 ) ;
+    }
+
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_Is301LV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_Is301LV( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
+    {
+        if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) == 0xFF )
+        {
+            return( 1 ) ;
+        }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_Sense(  USHORT tempbx , USHORT tempcx, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , i , tempch ;
+
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait( pVBInfo) ;
+
+    tempch = ( tempcx & 0x7F00 ) >> 8 ;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp > 0 )
+        return( 1 ) ;
+    else
+        return( 0 ) ;
+}
+
+#ifdef WIN2000
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SenseLCD( PHW_DEVICE_EXTENSION pHWDE, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax , tempbx , tempcx ;
+    UCHAR SoftSetting = XGI330_SoftSetting ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV ) )
+        return( 1 ) ;
+
+
+    if ( SoftSetting & HotPlugFunction )	/* Hot Plug Detection */
+    {
+        XGINew_SetRegAND( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+        tempbx = 0 ;
+        tempcx = 0x9010 ;
+        if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+            return( 1 ) ;
+
+        return( 0 ) ;
+    }
+    else	/* Get LCD Info from EDID */
+        return(XGI_GetLCDDDCInfo(pHWDE, pVBInfo));
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetLCDDDCInfo( PHW_DEVICE_EXTENSION pHWDE , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR tempah , tempbl , tempbh ;
+    USHORT tempbx , temp ;
+    UCHAR pjEDIDBuf[ 256 ] ;
+    ULONG ulBufferSize = 256 ;
+    UCHAR bMASK_OUTPUTSTATE_CRT2LCD = 2 ; /* 0423 shampoo */
+
+    bGetDdcInfo( pHWDE , MASK_OUTPUTSTATE_CRT2LCD , pjEDIDBuf , ulBufferSize ) ;
+    if ( ( *( ( PULONG )pjEDIDBuf ) == 0xFFFFFF00 ) && ( *( ( PULONG )( pjEDIDBuf + 4 ) ) == 0x00FFFFFF ) )
+    {
+        tempah = Panel1024x768 ;
+        tempbl=( *( pjEDIDBuf + 0x3A ) ) & 0xf0 ;
+
+        if ( tempbl != 0x40 )
+        {
+            tempah = Panel1600x1200 ;
+            if ( tempbl != 0x60 )
+            {
+                tempah = Panel1280x1024 ;
+                tempbh = ( *( pjEDIDBuf + 0x3B ) ) ;
+                if ( tempbh != 0x00 )
+                {
+                    tempah = Panel1280x960 ;
+                    if ( tempbh != 0x0C0 )
+                    {
+                        tempbx = ( ( *( pjEDIDBuf + 0x24 ) ) << 8 ) | ( *( pjEDIDBuf + 0x23 ) ) ;
+                        tempah = Panel1280x1024 ;
+                        if ( !( tempbx & 0x0100 ) )
+                        {
+                            tempah = Panel1024x768 ;
+                            if ( !( tempbx & 0x0E00 ) )
+                            {
+                                tempah = Panel1280x1024 ;
+                            }
+                        }
+                    }
+
+                    if ( tempbx & 0x00FF )
+                    {
+                        temp = ScalingLCD ;
+                        XGINew_SetRegOR( pVBInfo->P3d4 , 0x37 , temp ) ;
+                    }
+                }
+            }
+        }
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+        tempah = ( ( *( pjEDIDBuf + 0x47 ) ) & 0x06 ) ;		/* Polarity */
+        tempah = ( tempah ^ 0x06 ) << 4 ;
+        tempah |= LCDSync ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ( ~LCDSyncBit ) , tempah ) ;
+        tempbh= XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+        tempbh &= 0x07 ;
+        if ( tempbh == Panel1280x960 )
+            XGINew_SetRegAND( pVBInfo->P3d4 , 0x37 , 0x0E ) ;
+    }
+    else if ( *pjEDIDBuf == 0x20 )
+    {
+        tempah = Panel1024x768 ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
+    }
+    else
+    {
+        return( 0 ) ;
+    }
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DySense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus)
+{
+    UCHAR pre_CRD,pre_SR1E , pre_Part2_0 , pre_Part4_D ;
+    USHORT tempax , tempbx , tempcx , pushax , temp ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    UCHAR OutputSelect = XGI330_OutputSelect ;
+    PXGI_HW_DEVICE_INFO HwDeviceExtension= pHWDE->pXGIHWDE ;
+    UCHAR   bConnectStatus = 0 ;
+    pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ROMAddr  = pHWDE->pjVirtualRomBase ;
+
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pushax = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;	/* 0512 Fix Dysense hanged */
+    temp = ( pushax & 0x00FF ) | 0x80 ;
+    XGINew_SetRegOR( pVBInfo->P3d4 , 0x17 , temp ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+    /* beginning of dynamic sense CRT1 */
+
+    pVBInfo->IF_DEF_CH7007 = 0;
+    if (pHWDE->bCH7007)
+    {
+    	InitTo330Pointer( pHWDE->pXGIHWDE->jChipType, pVBInfo ) ;
+        HwDeviceExtension->pDevice = (PVOID)pHWDE;
+        pVBInfo->IF_DEF_CH7007 = 1;
+        /* [Billy] 2007/05/14 For CH7007 */
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+           bConnectStatus = SenseCHTV(HwDeviceExtension->pDevice) ; /* 07/05/28 */
+           XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0x03 , (UCHAR)bConnectStatus ) ;
+        }
+    }
+    if(( pHWDE->jChipID >= XG40 ) || ( pHWDE->jChipID >= XG20 ))
+    {
+
+        if ( pHWDE->jChipID >= XG40 )
+    	    XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;	/* write sense pattern 30->4a */
+    	else
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x5F ) ;	/* write sense pattern */
+
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x53 , 0xFF , 0x02 ) ;	/* enable sense DAC */
+        XGI_WaitDisply(pVBInfo) ;
+
+        if(XGINew_GetReg2( pVBInfo->P3c2 ) & 0x10 )
+            bConnectStatus |= Monitor1Sense ;
+
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0x53 , 0xFD ) ;	/* disable sense DAC */
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0x57 , 0x00 ) ;	/* clear sense pattern */
+
+
+        /* ---------- End of dynamic sense CRT1 ----------- */
+
+        /* ---------- beginning of dynamic sense VB ------------ */
+        pre_SR1E = XGINew_GetReg1( pVBInfo->P3c4 , 0x1E ) ;
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;	/* Enable CRT2,work-a-round for 301B/301LV/302LV */
+        pre_Part2_0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+        pre_Part4_D = XGINew_GetReg1( pVBInfo->Part4Port , 0x0D ) ;
+
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+            XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x07 , 0x01 ) ;	/* Set Part4 0x0D D[2:0] to 001b */
+
+        /* tempax = 0 ; */
+        if ( !XGI_Is301LV( pVBInfo ) )
+        {
+           tempbx = XGI330_RGBSenseData2 ;
+            tempcx = 0x0E08 ;
+            if(XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+            {
+                bConnectStatus |= Monitor2Sense ;
+                if ( OutputSelect & SetSCARTOutput )
+                {
+                    bConnectStatus ^= ( Monitor2Sense | SCARTSense ) ;
+                }
+            }
+        }
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x04 ) ;	/* Set Part4 0x0D D[2]=1 for dynamic sense */
+
+        if ( ( XGINew_Is301B( pVBInfo ) ) )
+            XGINew_SetRegOR( pVBInfo->Part2Port , 0x00 , 0x0C ) ;    /* ????????? */
+
+	if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) )		/* add by kuku for Dysense HiTV //start */
+	{
+	    bConnectStatus|= YPbPrSense ;
+	}
+	else
+	{
+        tempbx = XGI330_YCSenseData2 ;	/* Y/C Sense Data Ptr */
+        tempcx = 0x0604 ;
+        if ( XGINew_Sense( tempbx , tempcx , pVBInfo) )
+            bConnectStatus |= SVIDEOSense ;
+
+        if ( OutputSelect & BoardTVType )
+        {
+            tempbx = XGI330_VideoSenseData2 ;
+            tempcx = 0x0804 ;
+            if ( XGINew_Sense(tempbx , tempcx, pVBInfo) )
+                bConnectStatus|= AVIDEOSense ;
+        }
+        else
+        {
+            if ( !( bConnectStatus & SVIDEOSense ) )
+            {
+                tempbx = XGI330_VideoSenseData2 ;
+                tempcx = 0x0804 ;
+                if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
+                    bConnectStatus |= AVIDEOSense ;
+            }
+        }
+    	} /* end */
+        /* DySenseVBCnt */
+
+        tempbx = 0 ;
+        tempcx = 0 ;
+        XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+        if ( !( bConnectStatus & Monitor2Sense ) )
+        {
+            if ( XGI_SenseLCD( pHWDE , pVBInfo ) )
+                bConnectStatus |= LCDSense ;
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~( AVIDEOSense | SVIDEOSense | LCDSense | Monitor2Sense | Monitor1Sense ) , bConnectStatus ) ;
+
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , pre_Part4_D ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , pre_Part2_0 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x1E , pre_SR1E ) ;
+
+        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
+        {
+            tempax = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+            if ( tempax & 0x20 )
+            {
+                /* Reset VBPro */
+                for( tempcx = 2 ; tempcx > 0 ; tempcx-- )
+                {
+                    tempax ^= 0x20 ;
+                    XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , tempax ) ;
+                }
+            }
+        }
+        /* End of dynamic sense VB */
+    }
+    else
+    {
+        XGI_SenseCRT1(pVBInfo) ;
+        XGI_GetSenseStatus( HwDeviceExtension, pVBInfo ) ;	/* sense CRT2 */
+        bConnectStatus = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+    }
+    temp = pushax & 0x00FF ;		/* 0512 Fix Dysense hanged */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , temp ) ;
+    if ( bConnectStatus )
+    {
+        *ujConnectStatus = bConnectStatus ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+#endif /* WIN2000 */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetDPMS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
+{
+    USHORT ModeNo, ModeIdIndex ;
+    UCHAR  temp ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->BaseAddr = (ULONG)pXGIHWDE->pjIOAddress ;
+    pVBInfo->ROMAddr  = pXGIHWDE->pjVirtualRomBase ;
+
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_HiVision = 1 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_YPbPr = 1 ;
+    pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+    InitTo330Pointer( pXGIHWDE->jChipType,  pVBInfo ) ;
+    ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+          if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+          {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+          }
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_CH7007 == 0 )
+    {
+        XGINew_SetModeScratch ( pXGIHWDE , pVBInfo ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;	/* 1.Openkey */
+    XGI_UnLockCRT2( pXGIHWDE , pVBInfo) ;
+    ModeNo = XGINew_GetReg1( pVBInfo->P3d4 , 0x34 ) ;
+    XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+    XGI_GetVGAType( pXGIHWDE , pVBInfo ) ;
+
+    if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) || ( pVBInfo->IF_DEF_CH7007 == 1 ))
+    {
+        XGI_GetVBType( pVBInfo ) ;
+        XGI_GetVBInfo( ModeNo , ModeIdIndex , pXGIHWDE, pVBInfo ) ;
+        XGI_GetTVInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_GetLCDInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    }
+
+    if ( VESA_POWER_STATE == 0x00000400 )
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) & 0xFE ) ) ;
+    else
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) | 0x01 ) ) ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1f ) ;
+    temp &= 0x3f ;
+    switch ( VESA_POWER_STATE )
+    {
+        case 0x00000000: /* on */
+            if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x00 ) ) ;
+                XGI_EnableBridge( pXGIHWDE, pVBInfo ) ;
+            }
+            else
+            {
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 if ( pVBInfo->IF_DEF_LVDS == 1 )
+                 {
+                   XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+                   XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+                 }
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 if ( pVBInfo->IF_DEF_LVDS == 1 )
+                 {
+                   XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+                   XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+                 }
+               }
+               XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0x00 ) ;
+               XGINew_SetRegAND( pVBInfo->P3c4 , 0x01 , ~0x20 ) ;		/* CRT on */
+
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;	/* DVO ON */
+                   XGI_SetXG21FPBits( pVBInfo );
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ 	/* LCD Display ON */
+                 }
+                 XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+                 XGI_DisplayOn( pXGIHWDE, pVBInfo );
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;	/* DVO ON */
+                   XGI_SetXG27FPBits( pVBInfo );
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~0x20 , 0x20 ) ;*/ 	/* LCD Display ON */
+                 }
+                 XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+                 XGI_DisplayOn( pXGIHWDE, pVBInfo );
+               }
+            }
+            break ;
+        case 0x00000100: /* standby */
+            if ( pXGIHWDE->jChipType >= XG21 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+            }
+
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x40 ) ) ;
+            break ;
+        case 0x00000200: /* suspend */
+            if ( pXGIHWDE->jChipType == XG21 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+                XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+            }
+            if ( pXGIHWDE->jChipType == XG27 )
+            {
+                XGI_DisplayOff( pXGIHWDE, pVBInfo );
+                XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+            }
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x80 ) ) ;
+            break ;
+        case 0x00000400: /* off */
+            if ( (pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0xc0 ) ) ;
+                XGI_DisableBridge( pXGIHWDE, pVBInfo ) ;
+            }
+            else
+            {
+               if ( pXGIHWDE->jChipType == XG21 )
+               {
+                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+                 XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ;		/* DVO Off */
+                   XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ; 		/* Enable write GPIOF */
+                   /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ 		/* LCD Display OFF */
+                 }
+               }
+               if ( pXGIHWDE->jChipType == XG27 )
+               {
+                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
+
+                 XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
+
+                 temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+                 if ( temp & 0xE0 )
+                 {
+                   XGINew_SetRegAND( pVBInfo->P3c4 , 0x09 , ~0x80 ) ;		/* DVO Off */
+                 }
+               }
+               XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , ~0xC0 , 0xC0 ) ;
+               XGINew_SetRegOR( pVBInfo->P3c4 , 0x01 , 0x20 ) ;		/* CRT Off */
+
+               if ( ( pXGIHWDE->jChipType == XG21 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+               {
+                 XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+                 XGI_XG21BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+                 XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+               }
+               if ( ( pXGIHWDE->jChipType == XG27 ) && ( pVBInfo->IF_DEF_LVDS == 1 ) )
+               {
+                 XGI_XG21SetPanelDelay( 4,pVBInfo ) ;
+                 XGI_XG27BLSignalVDD( 0x01 , 0x00, pVBInfo ) ; /* LVDS VDD off */
+                 XGI_XG21SetPanelDelay( 5,pVBInfo ) ;
+               }
+            }
+            break ;
+
+        default:
+            break ;
+    }
+    XGI_LockCRT2( pXGIHWDE , pVBInfo ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax = 0 , tempbx , tempcx , temp ,
+           P2reg0 = 0 , SenseModeNo = 0 , OutputSelect = *pVBInfo->pOutputSelect ,
+           ModeIdIndex , i ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;	/* ynlai 02/27/2002 */
+        tempbx = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+        tempax = ( ( tempax & 0xFE ) >> 1 ) | ( tempbx << 8 ) ;
+        if ( tempax == 0x00 )
+        {		/* Get Panel id from DDC */
+            temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+            if ( temp == 1 )
+            {		/* LCD connect */
+                XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x39 , 0xFF , 0x01 ) ;	/* set CR39 bit0="1" */
+                XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , 0xEF , 0x00 ) ;	/* clean CR37 bit4="0" */
+                temp = LCDSense ;
+            }
+            else
+            {		/* LCD don't connect */
+                temp = 0 ;
+            }
+        }
+        else
+        {
+            XGINew_GetPanelID(pVBInfo) ;
+            temp = LCDSense ;
+        }
+
+        tempbx = ~( LCDSense | AVIDEOSense | SVIDEOSense ) ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , tempbx , temp ) ;
+    }
+    else
+    {		/* for 301 */
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {	/* for HiVision */
+            tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+            temp = tempax & 0x01 ;
+            tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+            temp = temp | ( tempax & 0x02 ) ;
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xA0 , temp ) ;
+        }
+        else
+        {
+            if ( XGI_BridgeIsOn( pVBInfo ) )
+            {
+                P2reg0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+                if ( !XGINew_BridgeIsEnable( HwDeviceExtension, pVBInfo ) )
+                {
+                    SenseModeNo = 0x2e ;
+                    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x41 ) ; */
+                    /* XGISetModeNew( HwDeviceExtension , 0x2e ) ; // ynlai InitMode */
+
+                    temp = XGI_SearchModeID( SenseModeNo , &ModeIdIndex, pVBInfo ) ;
+                    XGI_GetVGAType( HwDeviceExtension , pVBInfo) ;
+                    XGI_GetVBType( pVBInfo ) ;
+                    pVBInfo->SetFlag = 0x00 ;
+                    pVBInfo->ModeType = ModeVGA ;
+                    pVBInfo->VBInfo = SetCRT2ToRAMDAC | LoadDACFlag | SetInSlaveMode ;
+                    XGI_GetLCDInfo( 0x2e , ModeIdIndex, pVBInfo ) ;
+                    XGI_GetTVInfo(  0x2e , ModeIdIndex, pVBInfo ) ;
+                    XGI_EnableBridge( HwDeviceExtension, pVBInfo ) ;
+                    XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ;
+                    XGI_SetCRT2ModeRegs( 0x2e , HwDeviceExtension, pVBInfo ) ;
+                    /* XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ; */
+                    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ;	/* Display Off 0212 */
+                    for( i = 0 ; i < 20 ; i++ )
+                    {
+                        XGI_LongWait(pVBInfo) ;
+                    }
+                }
+                XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1c ) ;
+                tempax = 0 ;
+                tempbx = *pVBInfo->pRGBSenseData ;
+
+                if ( !( XGINew_Is301B( pVBInfo ) ) )
+                {
+                    tempbx = *pVBInfo->pRGBSenseData2 ;
+                }
+
+                tempcx = 0x0E08 ;
+                if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                {
+                    if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                    {
+                        tempax |= Monitor2Sense ;
+                    }
+                }
+
+                if ( pVBInfo->VBType & VB_XGI301C)
+                {
+                    XGINew_SetRegOR( pVBInfo->Part4Port , 0x0d , 0x04 ) ;
+                }
+
+		if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) )		/* add by kuku for Multi-adapter sense HiTV */
+		{
+		    tempax |= HiTVSense ;
+                    if ( ( pVBInfo->VBType & VB_XGI301C ) )
+                    {
+                	tempax ^= ( HiTVSense | YPbPrSense ) ;
+                    }
+                }
+
+		if ( !( tempax & ( HiTVSense | YPbPrSense ) ) )		/* start */
+                {
+
+                    tempbx = *pVBInfo->pYCSenseData ;
+
+                    if ( !( XGINew_Is301B(  pVBInfo ) ) )
+                    {
+                      tempbx=*pVBInfo->pYCSenseData2;
+                    }
+
+                    tempcx = 0x0604 ;
+                    if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                    {
+                      if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                      {
+                          tempax |= SVIDEOSense ;
+                      }
+                    }
+
+                    if ( OutputSelect & BoardTVType )
+                    {
+                      tempbx = *pVBInfo->pVideoSenseData ;
+
+                      if ( !( XGINew_Is301B( pVBInfo ) ) )
+                      {
+                          tempbx = *pVBInfo->pVideoSenseData2 ;
+                      }
+
+                      tempcx = 0x0804 ;
+                      if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                      {
+                          if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                          {
+                              tempax |= AVIDEOSense ;
+                          }
+                      }
+                    }
+                    else
+                    {
+                      if ( !( tempax & SVIDEOSense ) )
+                      {
+                        tempbx = *pVBInfo->pVideoSenseData ;
+
+                        if ( !( XGINew_Is301B( pVBInfo ) ) )
+                        {
+                            tempbx=*pVBInfo->pVideoSenseData2;
+                        }
+
+                        tempcx = 0x0804 ;
+                        if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                        {
+                            if ( XGINew_Sense(tempbx , tempcx, pVBInfo ) )
+                            {
+                                tempax |= AVIDEOSense ;
+                            }
+                        }
+                      }
+                    }
+                }
+    	    } /* end */
+            if ( !( tempax & Monitor2Sense ) )
+            {
+                if ( XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) )
+                {
+                    tempax |= LCDSense ;
+                }
+            }
+            tempbx = 0 ;
+            tempcx = 0 ;
+            XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
+
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0xDF , tempax ) ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , P2reg0 ) ;
+
+            if ( !( P2reg0 & 0x20 ) )
+            {
+                pVBInfo->VBInfo = DisableCRT2Display ;
+                /* XGI_SetCRT2Group301( SenseModeNo , HwDeviceExtension, pVBInfo ) ; */
+            }
+        }
+    }
+    XGI_DisableBridge( HwDeviceExtension, pVBInfo ) ;		/* shampoo 0226 */
+
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SenseLCD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SenseLCD( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    /* USHORT SoftSetting ; */
+    USHORT temp ;
+
+    if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+        temp = 0 ;
+    else
+        temp=XGINew_GetPanelID(pVBInfo) ;
+
+    if( !temp )
+        temp = XGINew_GetLCDDDCInfo( HwDeviceExtension, pVBInfo ) ;
+
+    return( temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetLCDDDCInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ;
+
+    /* add lcd sense */
+    if ( HwDeviceExtension->ulCRT2LCDType == LCD_UNKNOWN )
+    {
+        return( 0 ) ;
+    }
+    else
+    {
+        temp = ( USHORT )HwDeviceExtension->ulCRT2LCDType ;
+        switch( HwDeviceExtension->ulCRT2LCDType )
+        {
+            case LCD_INVALID:
+            case LCD_800x600:
+            case LCD_1024x768:
+            case LCD_1280x1024:
+                break ;
+
+            case LCD_640x480:
+            case LCD_1024x600:
+            case LCD_1152x864:
+            case LCD_1280x960:
+            case LCD_1152x768:
+                temp = 0 ;
+                break ;
+
+            case LCD_1400x1050:
+            case LCD_1280x768:
+            case LCD_1600x1200:
+                break ;
+
+            case LCD_1920x1440:
+            case LCD_2048x1536:
+                temp = 0 ;
+                break ;
+
+            default:
+                break ;
+        }
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , 0xF0 , temp ) ;
+        return( 1 ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT PanelTypeTable[ 16 ] = { SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType00 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType01 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType02 ,
+                                    SyncNN | PanelRGB18Bit | Panel640x480  | _PanelType03 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType04 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType05 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType06 ,
+                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType07 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType08 ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType09 ,
+                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType0A ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0B ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0C ,
+                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType0D ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0E ,
+                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0F } ;
+    USHORT tempax , tempbx , temp ;
+    /* USHORT return_flag ; */
+
+    tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;
+    tempbx = tempax & 0x1E ;
+
+    if ( tempax == 0 )
+        return( 0 ) ;
+    else
+    {
+/*
+        if ( !( tempax & 0x10 ) )
+        {
+            if ( pVBInfo->IF_DEF_LVDS == 1 )
+            {
+                tempbx = 0 ;
+                temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x38 ) ;
+                if ( temp & 0x40 )
+                    tempbx |= 0x08 ;
+                if ( temp & 0x20 )
+                    tempbx |= 0x02 ;
+                if ( temp & 0x01 )
+                    tempbx |= 0x01 ;
+
+                temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+                if ( temp & 0x80 )
+                    tempbx |= 0x04 ;
+            }
+            else
+            {
+                return( 0 ) ;
+            }
+        }
+*/
+
+        tempbx = tempbx >> 1 ;
+        temp = tempbx & 0x00F ;
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x36 , temp ) ;
+        tempbx-- ;
+        tempbx = PanelTypeTable[ tempbx ] ;
+
+        temp = ( tempbx & 0xFF00 ) >> 8 ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~( LCDSyncBit | LCDRGB18Bit ) , temp ) ;
+        return( 1 ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_BridgeIsEnable */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_BridgeIsEnable( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT flag ;
+
+    if ( XGI_BridgeIsOn( pVBInfo ) == 0 )
+    {
+        flag = XGINew_GetReg1( pVBInfo->Part1Port , 0x0 ) ;
+
+        if ( flag & 0x050 )
+        {
+            return( 1 ) ;
+        }
+        else
+        {
+            return( 0 ) ;
+        }
+
+    }
+    return( 0 ) ;
+}
+
+/* ------------------------------------------------------ */
+/* Function : XGINew_SenseHiTV */
+/* Input : */
+/* Output : */
+/* Description : */
+/* ------------------------------------------------------ */
+BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx , tempcx , temp , i , tempch;
+
+    tempbx = *pVBInfo->pYCSenseData2 ;
+
+    tempcx = 0x0604 ;
+
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait(pVBInfo) ;
+
+    tempch = ( tempcx & 0xFF00 ) >> 8;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp !=  tempch )
+        return( 0 ) ;
+
+    tempbx = *pVBInfo->pVideoSenseData2 ;
+
+    tempcx = 0x0804 ;
+    temp = tempbx & 0xFF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp |= ( tempcx & 0x00FF ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+    for( i = 0 ; i < 10 ; i++ )
+        XGI_LongWait(pVBInfo) ;
+
+    tempch = ( tempcx & 0xFF00 ) >> 8;
+    temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+    temp = temp ^ ( 0x0E ) ;
+    temp &= tempch ;
+
+    if ( temp !=  tempch )
+        return( 0 ) ;
+    else
+    {
+      tempbx = 0x3FF ;
+      tempcx = 0x0804 ;
+      temp = tempbx & 0xFF ;
+      XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
+      temp = ( tempbx & 0xFF00 ) >> 8 ;
+      temp |= ( tempcx & 0x00FF ) ;
+      XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x10 , ~0x1F , temp ) ;
+
+      for( i = 0 ; i < 10 ; i++ )
+          XGI_LongWait(pVBInfo) ;
+
+      tempch = ( tempcx & 0xFF00 ) >> 8;
+      temp = XGINew_GetReg1( pVBInfo->Part4Port , 0x03 ) ;
+      temp = temp ^ ( 0x0E ) ;
+      temp &= tempch ;
+
+      if ( temp != tempch )
+          return( 1 ) ;
+      else
+	  return( 0 ) ;
+    }
+}
+
+
+
+/*
+;-----------------------------------------------------------------------------
+;       Description: Get Panel support
+;	O/P	   :
+;            BL: Panel ID=81h for no scaler LVDS
+;		     BH: Panel enhanced Mode Count
+;		     CX: Panel H. resolution
+;		     DX: PAnel V. resolution
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+    USHORT ModeIdIndex;
+    USHORT ModeNo;
+
+    USHORT EModeCount;
+    USHORT lvdstableindex;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    pBiosArguments->h.bl = 0x81;
+    pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE;
+    pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE;
+    EModeCount = 0;
+
+    pBiosArguments->x.ax = 0x0014;
+    for( ModeIdIndex = 0 ; ;  ModeIdIndex ++ )
+    {
+        ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+        if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+        {
+            pBiosArguments->h.bh = (UCHAR) EModeCount;
+            return;
+        }
+        if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+        {
+          continue;
+        }
+        EModeCount++ ;
+    }
+}
+/*(
+;-----------------------------------------------------------------------------
+;
+;       Description: Get Panel mode ID for enhanced mode
+;	I/P	   : BH: EModeIndex ( which < Panel enhanced Mode Count )
+;	O/P	   :
+;            BL: Mode ID
+;		     CX: H. resolution of the assigned by the index
+;		     DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+
+    USHORT EModeCount;
+    USHORT ModeIdIndex,resindex;
+    USHORT ModeNo;
+    USHORT EModeIndex = pBiosArguments->h.bh;
+
+    EModeCount = 0;
+    for( ModeIdIndex = 0 ; ;  ModeIdIndex ++ )
+    {
+        ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
+        if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
+        {
+            pBiosArguments->x.ax = 0x0114;
+            return;
+        }
+        if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+        {
+          continue;
+        }
+        if (EModeCount == EModeIndex)
+        {
+            resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+            pBiosArguments->h.bl = (UCHAR) ModeNo;
+            pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+            pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+            pBiosArguments->x.ax = 0x0014;
+        }
+        EModeCount++ ;
+
+    }
+
+}
+/*
+;-----------------------------------------------------------------------------
+;
+;       Description: Validate Panel modes ID support
+;	I/P	   :
+;            BL: ModeID
+;	O/P	   :
+;		     CX: H. resolution of the assigned by the index
+;		     DX: V. resolution of the assigned by the index
+;
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub72( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+    USHORT ModeIdIndex,resindex;
+    USHORT ModeNo;
+
+
+    ModeNo = pBiosArguments->h.bl ;
+    XGI_SearchModeID( ModeNo, &ModeIdIndex, pVBInfo);
+    if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
+    {
+        pBiosArguments->x.cx = 0;
+        pBiosArguments->x.dx = 0;
+        pBiosArguments->x.ax = 0x0114;
+        return;
+    }
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        pBiosArguments->x.cx = pVBInfo->StResInfo[ resindex ].HTotal ;
+        pBiosArguments->x.dx = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+    }
+
+    pBiosArguments->x.ax = 0x0014;
+
+}
+
+/*
+;-----------------------------------------------------------------------------
+;	Description: Get Customized Panel misc. information support
+;	I/P	   : Select
+;		     to get panel horizontal timing
+;			 to get panel vertical timing
+;			 to get channel clock parameter
+;            to get panel misc information
+;
+;	O/P	   :
+;		     BL: for input Select = 0 ;
+;                       BX: *Value1 = Horizontal total
+;                       CX: *Value2 = Horizontal front porch
+;                       DX: *Value2 = Horizontal sync width
+;		     BL: for input Select = 1 ;
+;                       BX: *Value1 = Vertical total
+;                       CX: *Value2 = Vertical front porch
+;                       DX: *Value2 = Vertical sync width
+;            BL: for input Select = 2 ;
+;                       BX: Value1 = The first CLK parameter
+;                       CX: Value2 = The second CLK parameter
+;		     BL: for input Select = 4 ;
+;                       BX[15]: *Value1 D[15] VESA V. Polarity
+;                       BX[14]: *Value1 D[14] VESA H. Polarity
+;                       BX[7]: *Value1 D[7] Panel V. Polarity
+;                       BX[6]: *Value1 D[6] Panel H. Polarity
+;-----------------------------------------------------------------------------
+*/
+void XGI_XG21Fun14Sub73( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+{
+    UCHAR Select;
+
+    USHORT lvdstableindex;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    Select = pBiosArguments->h.bl;
+
+    switch (Select)
+    {
+        case 0:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP;
+                pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC;
+                break;
+        case 1:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP;
+                pBiosArguments->x.dx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC;
+                break;
+        case 2:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1;
+                pBiosArguments->x.cx = pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2;
+                break;
+        case 4:
+                pBiosArguments->x.bx = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability;
+                break;
+    }
+
+    pBiosArguments->x.ax = 0x0014;
+}
+
+
+void XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments)
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_HiVision = 1 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_YPbPr = 1 ;
+    pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+    InitTo330Pointer( pXGIHWDE->jChipType,  pVBInfo ) ;
+    ReadVBIOSTablData( pXGIHWDE->jChipType , pVBInfo) ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    switch(pBiosArguments->x.ax)
+    {
+    case 0x1470:
+         XGI_XG21Fun14Sub70( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1471:
+         XGI_XG21Fun14Sub71( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1472:
+         XGI_XG21Fun14Sub72( pVBInfo , pBiosArguments ) ;
+         break;
+    case 0x1473:
+         XGI_XG21Fun14Sub73( pVBInfo , pBiosArguments ) ;
+         break;
+    }
+}
diff --git a/drivers/staging/xgifb/vb_ext.h b/drivers/staging/xgifb/vb_ext.h
new file mode 100644
index 0000000..9a72f5e
--- /dev/null
+++ b/drivers/staging/xgifb/vb_ext.h
@@ -0,0 +1,32 @@
+#ifndef  _VBEXT_
+#define  _VBEXT_
+
+struct DWORDREGS {
+    ULONG    Eax, Ebx, Ecx, Edx, Esi, Edi, Ebp;
+};
+
+struct WORDREGS {
+    USHORT    ax, hi_ax, bx, hi_bx, cx, hi_cx, dx, hi_dx, si, hi_si, di ,hi_di, bp, hi_bp;
+};
+
+struct BYTEREGS {
+    UCHAR   al, ah, hi_al, hi_ah, bl, bh, hi_bl, hi_bh, cl, ch, hi_cl, hi_ch, dl, dh, hi_dl, hi_dh;
+};
+
+typedef union   _X86_REGS    {
+    struct  DWORDREGS e;
+    struct  WORDREGS x;
+    struct  BYTEREGS h;
+} X86_REGS, *PX86_REGS;
+
+extern   void     XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments);
+extern   void     XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
+extern   void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
+extern   void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+extern   USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+extern   BOOLEAN  XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus );
+#endif /* WIN2000 */
+
+#endif
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
new file mode 100644
index 0000000..b85ca9b
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.c
@@ -0,0 +1,3444 @@
+#include "osdef.h"
+#include "vgatypes.h"
+
+
+#ifdef LINUX_KERNEL
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/delay.h> /* udelay */
+#include "XGIfb.h"
+/*#if LINUX_VERSxION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif */
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_setmode.h"
+#include "vb_init.h"
+#include "vb_ext.h"
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+
+
+
+UCHAR    XGINew_ChannelAB,XGINew_DataBusWidth;
+
+USHORT XGINew_DRAMType[17][5]={{0x0C,0x0A,0x02,0x40,0x39},{0x0D,0x0A,0x01,0x40,0x48},
+                     {0x0C,0x09,0x02,0x20,0x35},{0x0D,0x09,0x01,0x20,0x44},
+                     {0x0C,0x08,0x02,0x10,0x31},{0x0D,0x08,0x01,0x10,0x40},
+                     {0x0C,0x0A,0x01,0x20,0x34},{0x0C,0x09,0x01,0x08,0x32},
+                     {0x0B,0x08,0x02,0x08,0x21},{0x0C,0x08,0x01,0x08,0x30},
+                     {0x0A,0x08,0x02,0x04,0x11},{0x0B,0x0A,0x01,0x10,0x28},
+                     {0x09,0x08,0x02,0x02,0x01},{0x0B,0x09,0x01,0x08,0x24},
+                     {0x0B,0x08,0x01,0x04,0x20},{0x0A,0x08,0x01,0x02,0x10},
+                     {0x09,0x08,0x01,0x01,0x00}};
+
+USHORT XGINew_SDRDRAM_TYPE[13][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 1,13, 9,64,0x44},
+{ 2,12, 8,32,0x31},
+{ 2,11, 9,32,0x25},
+{ 1,12, 9,32,0x34},
+{ 1,13, 8,32,0x40},
+{ 2,11, 8,16,0x21},
+{ 1,12, 8,16,0x30},
+{ 1,11, 9,16,0x24},
+{ 1,11, 8, 8,0x20},
+{ 2, 9, 8, 4,0x01},
+{ 1,10, 8, 4,0x10},
+{ 1, 9, 8, 2,0x00}
+};
+
+USHORT XGINew_DDRDRAM_TYPE[4][5]=
+{
+{ 2,12, 9,64,0x35},
+{ 2,12, 8,32,0x31},
+{ 2,11, 8,16,0x21},
+{ 2, 9, 8, 4,0x01}
+};
+USHORT XGINew_DDRDRAM_TYPE340[4][5]=
+{
+{ 2,13, 9,64,0x45},
+{ 2,12, 9,32,0x35},
+{ 2,12, 8,16,0x31},
+{ 2,11, 8, 8,0x21}
+};
+USHORT XGINew_DDRDRAM_TYPE20[12][5]=
+{
+{ 2,14,11,128,0x5D},
+{ 2,14,10,64,0x59},
+{ 2,13,11,64,0x4D},
+{ 2,14, 9,32,0x55},
+{ 2,13,10,32,0x49},
+{ 2,12,11,32,0x3D},
+{ 2,14, 8,16,0x51},
+{ 2,13, 9,16,0x45},
+{ 2,12,10,16,0x39},
+{ 2,13, 8, 8,0x41},
+{ 2,12, 9, 8,0x35},
+{ 2,12, 8, 4,0x31}
+};
+
+void     XGINew_SetDRAMSize_340(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void     XGINew_SetDRAMSize_310(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+void     XGINew_SetMemoryClock(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+void     XGINew_SetDRAMModeRegister(PVB_DEVICE_INFO );
+void     XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void 	 XGINew_SetDRAMDefaultRegister340(PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG, PVB_DEVICE_INFO );
+UCHAR    XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension) ;
+
+int      XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+void     XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO ,PVB_DEVICE_INFO) ;
+void     XGINew_CheckBusWidth_310( PVB_DEVICE_INFO) ;
+int      XGINew_SDRSizing(PVB_DEVICE_INFO);
+int      XGINew_DDRSizing( PVB_DEVICE_INFO );
+void     XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+int      XGINew_RAMType;                  /*int      ModeIDOffset,StandTable,CRT1Table,ScreenOffset,REFIndex;*/
+ULONG	 UNIROM;			  /* UNIROM */
+BOOLEAN  ChkLFB( PVB_DEVICE_INFO );
+void     XGINew_Delay15us(ULONG);
+void     SetPowerConsume (PXGI_HW_DEVICE_INFO HwDeviceExtension,ULONG XGI_P3d4Port);
+void 	 ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+void 	 XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo);
+void     XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void     XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension );
+void 	 XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+void     XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR    GetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void     XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
+UCHAR    GetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+
+#ifdef WIN2000
+/* [Billy] 2007/05/20 For CH7007 */
+extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+#endif
+
+#ifdef LINUX_KERNEL
+void DelayUS(ULONG MicroSeconds)
+{
+	udelay(MicroSeconds);
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+/* Function : XGIInitNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    UCHAR   i , temp = 0 , temp1 ;
+     //       VBIOSVersion[ 5 ] ;
+    PUCHAR  volatile pVideoMemory;
+
+    /* ULONG j, k ; */
+
+    PXGI_DSReg pSR ;
+
+    ULONG Temp ;
+
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+
+    pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr;
+
+
+//    Newdebugcode( 0x99 ) ;
+
+
+   /* if ( pVBInfo->ROMAddr == 0 ) */
+   /* return( FALSE ) ; */
+
+    if ( pVBInfo->FBAddr == 0 )
+{
+       printk("\n pVBInfo->FBAddr == 0 ");
+       return( FALSE ) ;
+}
+printk("1");
+    if ( pVBInfo->BaseAddr == 0 )
+{
+       printk("\npVBInfo->BaseAddr == 0 ");
+        return( FALSE ) ;
+}
+printk("2");
+
+    XGINew_SetReg3( ( pVBInfo->BaseAddr + 0x12 ) , 0x67 ) ;	/* 3c2 <- 67 ,ynlai */
+
+    pVBInfo->ISXPDOS = 0 ;
+printk("3");
+
+if ( !HwDeviceExtension->bIntegratedMMEnabled )
+{
+        return( FALSE ) ;	/* alan */
+}
+printk("4");
+
+//    XGI_MemoryCopy( VBIOSVersion , HwDeviceExtension->szVBIOSVer , 4 ) ;
+
+ //   VBIOSVersion[ 4 ] = 0x0 ;
+
+    /* 09/07/99 modify by domao */
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+printk("5");
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+    InitTo330Pointer( HwDeviceExtension->jChipType,  pVBInfo ) ;
+
+    /* ReadVBIOSData */
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    /* 1.Openkey */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+printk("6");
+
+    /* GetXG21Sense (GPIO) */
+    if ( HwDeviceExtension->jChipType == XG21 )
+    {
+    	XGINew_GetXG21Sense(HwDeviceExtension, pVBInfo) ;
+    }
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+    	XGINew_GetXG27Sense(HwDeviceExtension, pVBInfo) ;
+    }
+printk("7");
+
+    /* 2.Reset Extended register */
+
+    for( i = 0x06 ; i < 0x20 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+    for( i = 0x21 ; i <= 0x27 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+
+    /* for( i = 0x06 ; i <= 0x27 ; i++ ) */
+    /* XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ; */
+
+printk("8");
+
+    if(( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40))
+    {
+        for( i = 0x31 ; i <= 0x3B ; i++ )
+            XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+    }
+    else
+    {
+        for( i = 0x31 ; i <= 0x3D ; i++ )
+            XGINew_SetReg1( pVBInfo->P3c4 , i , 0 ) ;
+    }
+printk("9");
+
+    if ( HwDeviceExtension->jChipType == XG42 )			/* [Hsuan] 2004/08/20 Auto over driver for XG42 */
+      XGINew_SetReg1( pVBInfo->P3c4 , 0x3B , 0xC0 ) ;
+
+    /* for( i = 0x30 ; i <= 0x3F ; i++ ) */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ; */
+
+    for( i = 0x79 ; i <= 0x7C ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , i , 0 ) ;		/* shampoo 0208 */
+
+printk("10");
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ;
+
+    /* 3.SetMemoryClock
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+        XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) ;
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;  */
+
+printk("11");
+
+    /* 4.SetDefExt1Regs begin */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , *pVBInfo->pSR07 ) ;
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x40 , *pVBInfo->pSR40 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x41 , *pVBInfo->pSR41 ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , 0x0F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , *pVBInfo->pSR1F ) ;
+    /* XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ; */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0xA0 ) ;	/* alan, 2001/6/26 Frame buffer can read/write SR20 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , 0x70 ) ;	/* Hsuan, 2006/01/01 H/W request for slow corner chip */
+    if ( HwDeviceExtension->jChipType == XG27 )         /* Alan 12/07/2006 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x36 , *pVBInfo->pSR36 ) ;
+
+    /* SR11 = 0x0F ; */
+    /* XGINew_SetReg1( pVBInfo->P3c4 , 0x11 , SR11 ) ; */
+
+printk("12");
+
+   if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+//    /* Set AGP Rate */
+//    temp1 = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+//    temp1 &= 0x02 ;
+//    if ( temp1 == 0x02 )
+//    {
+//        XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+//       ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+//        XGINew_SetReg4( 0xcf8 , 0x8000002C ) ;
+//        VendorID = XGINew_GetReg3( 0x0cfc ) ;
+//        VendorID &= 0x0000FFFF ;
+//        XGINew_SetReg4( 0xcf8 , 0x8001002C ) ;
+//        GraphicVendorID = XGINew_GetReg3( 0x0cfc ) ;
+//        GraphicVendorID &= 0x0000FFFF;
+//
+//        if ( ChipsetID == 0x7301039 )
+///            XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x09 ) ;
+//
+//        ChipsetID &= 0x0000FFFF ;
+///
+//        if ( ( ChipsetID == 0x700E ) || ( ChipsetID == 0x1022 ) || ( ChipsetID == 0x1106 ) || ( ChipsetID == 0x10DE ) )
+//        {
+//            if ( ChipsetID == 0x1106 )
+//            {
+//                if ( ( VendorID == 0x1019 ) && ( GraphicVendorID == 0x1019 ) )
+//                    XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0D ) ;
+//                else
+//                    XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+//            }
+//            else
+//                XGINew_SetReg1( pVBInfo->P3d4 , 0x5F , 0x0B ) ;
+//        }
+//    }
+
+printk("13");
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        /* Set AGP customize registers (in SetDefAGPRegs) Start */
+        for( i = 0x47 ; i <= 0x4C ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ i - 0x47 ] ) ;
+
+        for( i = 0x70 ; i <= 0x71 ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 6 + i - 0x70 ] ) ;
+
+        for( i = 0x74 ; i <= 0x77 ; i++ )
+            XGINew_SetReg1( pVBInfo->P3d4 , i , pVBInfo->AGPReg[ 8 + i - 0x74 ] ) ;
+        /* Set AGP customize registers (in SetDefAGPRegs) End */
+        /*[Hsuan]2004/12/14 AGP Input Delay Adjustment on 850 */
+//        XGINew_SetReg4( 0xcf8 , 0x80000000 ) ;
+//        ChipsetID = XGINew_GetReg3( 0x0cfc ) ;
+//        if ( ChipsetID == 0x25308086 )
+//            XGINew_SetReg1( pVBInfo->P3d4 , 0x77 , 0xF0 ) ;
+
+        HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x50 , 0 , &Temp ) ;	/* Get */
+        Temp >>= 20 ;
+        Temp &= 0xF ;
+
+        if ( Temp == 1 )
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , 0x20 ) ;	/* CR48 */
+    }
+printk("14");
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x49 , pVBInfo->CR49[ 0 ] ) ;
+    }	/* != XG20 */
+
+    /* Set PCI */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x23 , *pVBInfo->pSR23 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x24 , *pVBInfo->pSR24 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x25 , pVBInfo->SR25[ 0 ] ) ;
+printk("15");
+
+    if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+    /* Set VB */
+    XGI_UnLockCRT2( HwDeviceExtension, pVBInfo) ;
+    XGINew_SetRegANDOR( pVBInfo->Part0Port , 0x3F , 0xEF , 0x00 ) ;	/* alan, disable VideoCapture */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , 0x00 ) ;
+    temp1 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x7B ) ;		/* chk if BCLK>=100MHz */
+    temp = ( UCHAR )( ( temp1 >> 4 ) & 0x0F ) ;
+
+
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , ( *pVBInfo->pCRT2Data_1_2 ) ) ;
+
+printk("16");
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x2E , 0x08 ) ;	/* use VB */
+    } /* != XG20 */
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x27 , 0x1F ) ;
+
+    if ( ( HwDeviceExtension->jChipType == XG42 ) && XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo) != 0 )	/* Not DDR */
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , ( *pVBInfo->pSR31 & 0x3F ) | 0x40 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( *pVBInfo->pSR32 & 0xFC ) | 0x01 ) ;
+    }
+    else
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , *pVBInfo->pSR31 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , *pVBInfo->pSR32 ) ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x33 , *pVBInfo->pSR33 ) ;
+printk("17");
+
+/*
+    if ( HwDeviceExtension->jChipType >= XG40 )
+      SetPowerConsume ( HwDeviceExtension , pVBInfo->P3c4);	*/
+
+    if ( HwDeviceExtension->jChipType < XG20 )		/* kuku 2004/06/25 */
+    {
+    if ( XGI_BridgeIsOn( pVBInfo ) == 1 )
+    {
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , 0x1C ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , *pVBInfo->pCRT2Data_4_D ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0E , *pVBInfo->pCRT2Data_4_E ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , *pVBInfo->pCRT2Data_4_10 ) ;
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
+        }
+
+        XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+    }
+    }	/* != XG20 */
+printk("18");
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x83 , 0x00 ) ;
+printk("181");
+
+    if ( HwDeviceExtension->bSkipSense == FALSE )
+    {
+printk("182");
+
+        XGI_SenseCRT1(pVBInfo) ;
+
+printk("183");
+        /* XGINew_DetectMonitor( HwDeviceExtension ) ; */
+pVBInfo->IF_DEF_CH7007 = 0;
+        if ( ( HwDeviceExtension->jChipType == XG21 ) && (pVBInfo->IF_DEF_CH7007) )
+        {
+printk("184");
+           XGI_GetSenseStatus( HwDeviceExtension , pVBInfo ) ; 	/* sense CRT2 */
+printk("185");
+
+        }
+        if ( HwDeviceExtension->jChipType == XG21 )
+        {
+printk("186");
+
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ;	/* Z9 default has CRT */
+       	  temp = GetXG21FPBits( pVBInfo ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x01, temp ) ;
+printk("187");
+
+          }
+        if ( HwDeviceExtension->jChipType == XG27 )
+        {
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~Monitor1Sense , Monitor1Sense ) ;	/* Z9 default has CRT */
+       	  temp = GetXG27FPBits( pVBInfo ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ~0x03, temp ) ;
+        }
+    }
+printk("19");
+
+    if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        if ( HwDeviceExtension->jChipType >= XG40 )
+        {
+          XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+         }
+
+        XGINew_SetDRAMDefaultRegister340( HwDeviceExtension ,  pVBInfo->P3d4,  pVBInfo ) ;
+
+        if ( HwDeviceExtension->bSkipDramSizing == TRUE )
+        {
+            pSR = HwDeviceExtension->pSR ;
+            if ( pSR!=NULL )
+            {
+                while( pSR->jIdx != 0xFF )
+                {
+                    XGINew_SetReg1( pVBInfo->P3c4 , pSR->jIdx , pSR->jVal ) ;
+                    pSR++ ;
+                }
+            }
+            /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+        }   	/* SkipDramSizing */
+        else
+        {
+#if 0
+           if ( HwDeviceExtension->jChipType == XG20 )
+            {
+            	XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , pVBInfo->SR15[0][XGINew_RAMType] ) ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , pVBInfo->SR15[1][XGINew_RAMType] ) ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ;
+            }
+            else
+#endif
+{
+printk("20");
+
+               XGINew_SetDRAMSize_340( HwDeviceExtension , pVBInfo) ;
+}
+printk("21");
+
+        }
+    }		/* XG40 */
+
+printk("22");
+
+
+    /* SetDefExt2Regs begin */
+/*
+    AGP = 1 ;
+    temp =( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+    temp &= 0x30 ;
+    if ( temp == 0x30 )
+        AGP = 0 ;
+
+    if ( AGP == 0 )
+        *pVBInfo->pSR21 &= 0xEF ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+    if ( AGP == 1 )
+        *pVBInfo->pSR22 &= 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+*/
+
+//    base = 0x80000000 ;
+//    OutPortLong( 0xcf8 , base ) ;
+//    Temp = ( InPortLong( 0xcfc ) & 0xFFFF ) ;
+//    if ( Temp == 0x1039 )
+//    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , ( UCHAR )( ( *pVBInfo->pSR22 ) & 0xFE ) ) ;
+//    }
+//    else
+//    {
+//        XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , *pVBInfo->pSR22 ) ;
+//    }
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , *pVBInfo->pSR21 ) ;
+
+printk("23");
+
+
+    XGINew_ChkSenseStatus ( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetModeScratch ( HwDeviceExtension , pVBInfo ) ;
+
+printk("24");
+
+
+XGINew_SetReg1( pVBInfo->P3d4 , 0x8c , 0x87);
+XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31);
+printk("25");
+
+    return( TRUE ) ;
+} /* end of init */
+
+
+
+
+
+/* ============== alan ====================== */
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetXG20DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data, temp ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )
+    {
+        if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        {
+            data = *pVBInfo->pSoftSetting & 0x07 ;
+            return( data ) ;
+        }
+        else
+        {
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ;
+
+            if ( data == 0 )
+                data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) & 0x02 ) >> 1 ;
+
+            return( data ) ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        {
+            data = *pVBInfo->pSoftSetting & 0x07 ;
+            return( data ) ;
+        }
+        temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3B ) ;
+
+     	if (( temp & 0x88 )==0x80)		/* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */
+       	  data = 0 ;					/*DDR*/
+        else
+       	  data = 1 ; 					/*DDRII*/
+       	return( data ) ;
+    }
+    else if ( HwDeviceExtension->jChipType == XG21 )
+    {
+        XGINew_SetRegAND( pVBInfo->P3d4 , 0xB4 , ~0x02 ) ;     		/* Independent GPIO control */
+     	DelayUS(800);
+        XGINew_SetRegOR( pVBInfo->P3d4 , 0x4A , 0x80 ) ;		/* Enable GPIOH read */
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;       		/* GPIOF 0:DVI 1:DVO */
+// HOTPLUG_SUPPORT
+// for current XG20 & XG21, GPIOH is floating, driver will fix DDR temporarily
+     	if ( temp & 0x01 )						/* DVI read GPIOH */
+       	  data = 1 ;							/*DDRII*/
+        else
+       	  data = 0 ; 							/*DDR*/
+//~HOTPLUG_SUPPORT
+       	XGINew_SetRegOR( pVBInfo->P3d4 , 0xB4 , 0x02 ) ;
+       	return( data ) ;
+    }
+    else
+    {
+    	data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) & 0x01 ;
+
+    	if ( data == 1 )
+            data ++ ;
+
+    	return( data );
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Get310DRAMType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_Get310DRAMType(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data ;
+
+  /* index = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ; */
+  /* index &= 07 ; */
+
+    if ( *pVBInfo->pSoftSetting & SoftDRAMType )
+        data = *pVBInfo->pSoftSetting & 0x03 ;
+    else
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3a ) & 0x03 ;
+
+    return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_Delay15us */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*
+void XGINew_Delay15us(ULONG ulMicrsoSec)
+{
+}
+*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SDR_MRS(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+    data &= 0x3F ;          /* SR16 D7=0,D6=0 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;   /* enable mode register set(MRS) low */
+    /* XGINew_Delay15us( 0x100 ) ; */
+    data |= 0x80 ;          /* SR16 D7=1,D6=0 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;   /* enable mode register set(MRS) high */
+    /* XGINew_Delay15us( 0x100 ) ; */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    if ( *pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C )	/* Samsung F Die */
+    {
+        DelayUS( 3000 ) ;	/* Delay 67 x 3 Delay15us */
+        XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+        XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+        XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+        XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    }
+
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 0 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 1 ] ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 2 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , pVBInfo->SR16[ 3 ] ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_MRS_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRII_Bootup_XG27 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDRII_Bootup_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+    XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+   /* Set Double Frequency */
+    /* XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ; */		/* CR97 */
+    XGINew_SetReg1( P3d4 , 0x97 , *pVBInfo->pXGINew_CR97 ) ;    /* CR97 */
+
+    DelayUS( 200 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS2
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS3
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS1
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;   /* Set SR18 */ //MRS, DLL Enable
+    XGINew_SetReg1( P3c4 , 0x19 , 0x0A ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;   /* Set SR16 */
+    /* DelayUS( 15 ) ; */
+
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;   /* Set SR1B */
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;   /* Set SR1B */
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;   /* Set SR18 */ //MRS, DLL Reset
+    XGINew_SetReg1( P3c4 , 0x19 , 0x08 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;   /* Set SR16 */
+
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x80 ) ;   /* Set SR18 */ //MRS, ODT
+    XGINew_SetReg1( P3c4 , 0x19 , 0x46 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;   /* Set SR18 */ //EMRS
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;   /* Set SR19 */
+    XGINew_SetReg1( P3c4 , 0x16 , 0x20 ) ;   /* Set SR16 */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0xA0 ) ;   /* Set SR16 */
+    DelayUS( 15 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;   /* Set SR1B refresh control 000:close; 010:open */
+    DelayUS( 200 ) ;
+
+
+}
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+
+    XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;			/* CR97 */
+
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS2 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS3 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+   // XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x02 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    DelayUS( 15 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;			/* SR1B */
+    DelayUS( 100 ) ;
+
+    //XGINew_SetReg1( P3c4 , 0x18 , 0x52 ) ;			/* MRS2 */
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x05 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x85 ) ;
+
+    DelayUS( 200 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_MRS_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = P3c4 + 0x10 ;
+
+     XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
+     XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;			/* CR97 */
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS2 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x10 ) ;
+    DelayUS( 15 ) ;                          ////06/11/23 XG27 A0 for CKE enable
+    XGINew_SetReg1( P3c4 , 0x16 , 0x90 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS3 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0xC0 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/22 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;			/* EMRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/22 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x06 ) ;   ////[Billy]06/11/22 DLL Reset for XG27 Hynix DRAM
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 15 ) ;                          ////06/11/23 XG27 A0
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    DelayUS( 30 ) ;                          ////06/11/23 XG27 A0 Start Auto-PreCharge
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;			/* SR1B */
+
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x42 ) ;			/* MRS1 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x04 ) ;   //// DLL without Reset for XG27 Hynix DRAM
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x80 );     ////XG27 OCD ON
+    XGINew_SetReg1( P3c4 , 0x19 , 0x46 );
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 );
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 );
+
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    DelayUS( 30 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+
+    DelayUS( 15 ) ;                         ////Start Auto-PreCharge
+    XGINew_SetReg1( P3c4 , 0x1B , 0x04 ) ;			/* SR1B */
+    DelayUS( 200 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;			/* SR1B */
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+        XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+        XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+        XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+
+        XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+        XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+        XGINew_DDR1x_MRS_XG20( P3c4 , pVBInfo) ;
+    }
+    else
+    {
+        XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+        switch( HwDeviceExtension->jChipType )
+        {
+            case XG41:
+            case XG42:
+                XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+                XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+                XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+                break ;
+            default:
+                XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+                XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+                XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+                XGINew_GetReg1( P3d4 , 0x86 ) ;
+                XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;
+                XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+                XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+                XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+                XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+                XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+                XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+                break ;
+        }
+
+        XGINew_SetReg1( P3d4 , 0x97 , 0x00 ) ;
+        XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+        XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+        XGINew_DDR1x_MRS_340( P3c4 , pVBInfo ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2x_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port ,PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
+
+    /* 20040906 Hsuan modify CR82, CR85, CR86 for XG42 */
+    switch( HwDeviceExtension->jChipType )
+    {
+       case XG41:
+       case XG42:
+            XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+            XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+            XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+            break ;
+       default:
+         /* keep following setting sequence, each setting in the same reg insert idle */
+         XGINew_SetReg1( P3d4 , 0x82 , 0x88 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    	 XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+    	 XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    	 XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+    	 XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+    }
+    XGINew_SetReg1( P3d4 , 0x97 , 0x11 ) ;
+    if ( HwDeviceExtension->jChipType == XG42 )
+    {
+      XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+    }
+    else
+    {
+      XGINew_SetReg1( P3d4 , 0x98 , 0x03 ) ;
+    }
+    XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+
+    XGINew_DDR2x_MRS_340( P3c4 , pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR2_DefaultRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR2_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    /* keep following setting sequence, each setting in the same reg insert idle */
+    XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    XGINew_SetReg1( P3d4 , 0x86 , 0x00 ) ;
+    XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x86 , 0x88 ) ;
+    XGINew_GetReg1( P3d4 , 0x86 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x86 , pVBInfo->CR40[ 13 ][ XGINew_RAMType ] ) ;	/* CR86 */
+    XGINew_SetReg1( P3d4 , 0x82 , 0x77 ) ;
+    XGINew_SetReg1( P3d4 , 0x85 , 0x00 ) ;
+    XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x85 , 0x88 ) ;
+    XGINew_GetReg1( P3d4 , 0x85 ) ;				/* Insert read command for delay */
+    XGINew_SetReg1( P3d4 , 0x85 , pVBInfo->CR40[ 12 ][ XGINew_RAMType ] ) ;	/* CR85 */
+    if ( HwDeviceExtension->jChipType == XG27 )
+      XGINew_SetReg1( P3d4 , 0x82 , pVBInfo->CR40[ 11 ][ XGINew_RAMType ] ) ;	/* CR82 */
+    else
+    XGINew_SetReg1( P3d4 , 0x82 , 0xA8 ) ;	/* CR82 */
+
+    XGINew_SetReg1( P3d4 , 0x98 , 0x01 ) ;
+    XGINew_SetReg1( P3d4 , 0x9A , 0x02 ) ;
+    if ( HwDeviceExtension->jChipType == XG27 )
+       XGINew_DDRII_Bootup_XG27( HwDeviceExtension ,  P3c4 , pVBInfo) ;
+    else
+    XGINew_DDR2_MRS_XG20( HwDeviceExtension , P3c4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMDefaultRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMDefaultRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp , temp1 , temp2 , temp3 ,
+          i , j , k ;
+
+    ULONG P3d4 = Port ,
+           P3c4 = Port - 0x10 ;
+
+    XGINew_SetReg1( P3d4 , 0x6D , pVBInfo->CR40[ 8 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x68 , pVBInfo->CR40[ 5 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x69 , pVBInfo->CR40[ 6 ][ XGINew_RAMType ] ) ;
+    XGINew_SetReg1( P3d4 , 0x6A , pVBInfo->CR40[ 7 ][ XGINew_RAMType ] ) ;
+
+    temp2 = 0 ;
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        temp = pVBInfo->CR6B[ XGINew_RAMType ][ i ] ;        		/* CR6B DQS fine tune delay */
+        for( j = 0 ; j < 4 ; j++ )
+        {
+            temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+            temp2 |= temp1 ;
+            XGINew_SetReg1( P3d4 , 0x6B , temp2 ) ;
+            XGINew_GetReg1( P3d4 , 0x6B ) ;				/* Insert read command for delay */
+            temp2 &= 0xF0 ;
+            temp2 += 0x10 ;
+        }
+    }
+
+    temp2 = 0 ;
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        temp = pVBInfo->CR6E[ XGINew_RAMType ][ i ] ;        		/* CR6E DQM fine tune delay */
+        for( j = 0 ; j < 4 ; j++ )
+        {
+            temp1 = ( ( temp >> ( 2 * j ) ) & 0x03 ) << 2 ;
+            temp2 |= temp1 ;
+            XGINew_SetReg1( P3d4 , 0x6E , temp2 ) ;
+            XGINew_GetReg1( P3d4 , 0x6E ) ;				/* Insert read command for delay */
+            temp2 &= 0xF0 ;
+            temp2 += 0x10 ;
+        }
+    }
+
+    temp3 = 0 ;
+    for( k = 0 ; k < 4 ; k++ )
+    {
+        XGINew_SetRegANDOR( P3d4 , 0x6E , 0xFC , temp3 ) ;		/* CR6E_D[1:0] select channel */
+        temp2 = 0 ;
+        for( i = 0 ; i < 8 ; i++ )
+        {
+            temp = pVBInfo->CR6F[ XGINew_RAMType ][ 8 * k + i ] ;   	/* CR6F DQ fine tune delay */
+            for( j = 0 ; j < 4 ; j++ )
+            {
+                temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+                temp2 |= temp1 ;
+                XGINew_SetReg1( P3d4 , 0x6F , temp2 ) ;
+                XGINew_GetReg1( P3d4 , 0x6F ) ;				/* Insert read command for delay */
+                temp2 &= 0xF8 ;
+                temp2 += 0x08 ;
+            }
+        }
+        temp3 += 0x01 ;
+    }
+
+    XGINew_SetReg1( P3d4 , 0x80 , pVBInfo->CR40[ 9 ][ XGINew_RAMType ] ) ;	/* CR80 */
+    XGINew_SetReg1( P3d4 , 0x81 , pVBInfo->CR40[ 10 ][ XGINew_RAMType ] ) ;	/* CR81 */
+
+    temp2 = 0x80 ;
+    temp = pVBInfo->CR89[ XGINew_RAMType ][ 0 ] ;        		/* CR89 terminator type select */
+    for( j = 0 ; j < 4 ; j++ )
+    {
+        temp1 = ( temp >> ( 2 * j ) ) & 0x03 ;
+        temp2 |= temp1 ;
+        XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+        XGINew_GetReg1( P3d4 , 0x89 ) ;				/* Insert read command for delay */
+        temp2 &= 0xF0 ;
+        temp2 += 0x10 ;
+    }
+
+    temp = pVBInfo->CR89[ XGINew_RAMType ][ 1 ] ;
+    temp1 = temp & 0x03 ;
+    temp2 |= temp1 ;
+    XGINew_SetReg1( P3d4 , 0x89 , temp2 ) ;
+
+    temp = pVBInfo->CR40[ 3 ][ XGINew_RAMType ] ;
+    temp1 = temp & 0x0F ;
+    temp2 = ( temp >> 4 ) & 0x07 ;
+    temp3 = temp & 0x80 ;
+    XGINew_SetReg1( P3d4 , 0x45 , temp1 ) ;	/* CR45 */
+    XGINew_SetReg1( P3d4 , 0x99 , temp2 ) ;	/* CR99 */
+    XGINew_SetRegOR( P3d4 , 0x40 , temp3 ) ;	/* CR40_D[7] */
+    XGINew_SetReg1( P3d4 , 0x41 , pVBInfo->CR40[ 0 ][ XGINew_RAMType ] ) ;	/* CR41 */
+
+    if ( HwDeviceExtension->jChipType == XG27 )
+      XGINew_SetReg1( P3d4 , 0x8F , *pVBInfo->pCR8F ) ;	/* CR8F */
+
+    for( j = 0 ; j <= 6 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0x90 + j ) , pVBInfo->CR40[ 14 + j ][ XGINew_RAMType ] ) ;	/* CR90 - CR96 */
+
+    for( j = 0 ; j <= 2 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0xC3 + j ) , pVBInfo->CR40[ 21 + j ][ XGINew_RAMType ] ) ;	/* CRC3 - CRC5 */
+
+    for( j = 0 ; j < 2 ; j++ )
+        XGINew_SetReg1( P3d4 , ( 0x8A + j ) , pVBInfo->CR40[ 1 + j ][ XGINew_RAMType ] ) ;	/* CR8A - CR8B */
+
+    if ( ( HwDeviceExtension->jChipType == XG41 ) || ( HwDeviceExtension->jChipType == XG42 ) )
+        XGINew_SetReg1( P3d4 , 0x8C , 0x87 ) ;
+
+    XGINew_SetReg1( P3d4 , 0x59 , pVBInfo->CR40[ 4 ][ XGINew_RAMType ] ) ;	/* CR59 */
+
+    XGINew_SetReg1( P3d4 , 0x83 , 0x09 ) ;	/* CR83 */
+    XGINew_SetReg1( P3d4 , 0x87 , 0x00 ) ;	/* CR87 */
+    XGINew_SetReg1( P3d4 , 0xCF , *pVBInfo->pCRCF ) ;	/* CRCF */
+    if ( XGINew_RAMType )
+    {
+      //XGINew_SetReg1( P3c4 , 0x17 , 0xC0 ) ;		/* SR17 DDRII */
+      XGINew_SetReg1( P3c4 , 0x17 , 0x80 ) ;		/* SR17 DDRII */
+      if ( HwDeviceExtension->jChipType == XG27 )
+        XGINew_SetReg1( P3c4 , 0x17 , 0x02 ) ;		/* SR17 DDRII */
+
+    }
+    else
+      XGINew_SetReg1( P3c4 , 0x17 , 0x00 ) ;		/* SR17 DDR */
+    XGINew_SetReg1( P3c4 , 0x1A , 0x87 ) ;		/* SR1A */
+
+    temp = XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) ;
+    if( temp == 0 )
+      XGINew_DDR1x_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+    else
+    {
+      XGINew_SetReg1( P3d4 , 0xB0 , 0x80 ) ;		/* DDRII Dual frequency mode */
+      XGINew_DDR2_DefaultRegister( HwDeviceExtension, P3d4, pVBInfo ) ;
+    }
+    XGINew_SetReg1( P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR_MRS */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR_MRS(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+    /* SR16 <- 1F,DF,2F,AF */
+    /* yriver modified SR16 <- 0F,DF,0F,AF */
+    /* enable DLL of DDR SD/SGRAM , SR16 D4=1 */
+    data = pVideoMemory[ 0xFB ] ;
+    /* data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ; */
+
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xC0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0x80 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xD0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+    data |= 0xA0 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , data ) ;
+/*
+   else {
+     data &= 0x0F;
+     data |= 0x10;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+     if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+     {
+       data &= 0x0F;
+     }
+
+     data |= 0xC0;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+
+
+     data &= 0x0F;
+     data |= 0x20;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+     if (!(pVBInfo->SR15[1][XGINew_RAMType] & 0x10))
+     {
+       data &= 0x0F;
+     }
+
+     data |= 0x80;
+     XGINew_SetReg1(pVBInfo->P3c4,0x16,data);
+   }
+*/
+}
+
+
+/* check if read cache pointer is correct */
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_VerifyMclk */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_VerifyMclk( PXGI_HW_DEVICE_INFO  HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    PUCHAR pVideoMemory = pVBInfo->FBAddr ;
+    UCHAR i , j ;
+    USHORT Temp , SR21 ;
+
+    pVideoMemory[ 0 ] = 0xaa ; 		/* alan */
+    pVideoMemory[ 16 ] = 0x55 ; 	/* note: PCI read cache is off */
+
+    if ( ( pVideoMemory[ 0 ] != 0xaa ) || ( pVideoMemory[ 16 ] != 0x55 ) )
+    {
+        for( i = 0 , j = 16 ; i < 2 ; i++ , j += 16 )
+        {
+            SR21 = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+            Temp = SR21 & 0xFB ;	/* disable PCI post write buffer empty gating */
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , Temp ) ;
+
+            Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+            Temp |= 0x01 ;		/* MCLK reset */
+
+
+            Temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x3C ) ;
+            Temp &= 0xFE ;		/* MCLK normal operation */
+
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , SR21 ) ;
+
+            pVideoMemory[ 16 + j ] = j ;
+            if ( pVideoMemory[ 16 + j ] == j )
+            {
+                pVideoMemory[ j ] = j ;
+                break ;
+            }
+        }
+    }
+}
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize_340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+
+    XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+    XGI_DisplayOff( HwDeviceExtension, pVBInfo );
+
+    /*data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;*/
+    /*data |= 0x20 ;*/
+    /*XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;*/			/* Turn OFF Display */
+    XGINew_DDRSizing340( HwDeviceExtension, pVBInfo ) ;
+    data=XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    pVBInfo->ROMAddr  = HwDeviceExtension->pjVirtualRomBase ,
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+#ifdef XGI301
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x40 ) ; */
+#endif
+
+#ifdef XGI302	/* alan,should change value */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x30 , 0x4D ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x31 , 0xc0 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , 0x3F ) ;
+#endif
+
+    XGISetModeNew( HwDeviceExtension , 0x2e ) ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;
+    data |= 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;		/* Turn OFF Display */
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , ( USHORT )( data | 0x0F ) ) ;		/* assume lowest speed DRAM */
+
+    XGINew_SetDRAMModeRegister( pVBInfo ) ;
+    XGINew_DisableRefresh( HwDeviceExtension, pVBInfo ) ;
+    XGINew_CheckBusWidth_310( pVBInfo) ;
+    XGINew_VerifyMclk( HwDeviceExtension, pVBInfo ) ;	/* alan 2000/7/3 */
+
+
+
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+        XGINew_SDRSizing( pVBInfo ) ;
+    }
+    else
+    {
+        XGINew_DDRSizing( pVBInfo) ;
+    }
+
+
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , pVBInfo->SR15[ 1 ][ XGINew_RAMType ] ) ;	/* restore SR16 */
+
+    XGINew_EnableRefresh(  HwDeviceExtension, pVBInfo ) ;
+    data=XGINew_GetReg1( pVBInfo->P3c4 ,0x21 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR data ;
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+    if ( HwDeviceExtension->jChipType < XG20 )                  /* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+    {
+        data = ( XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) & 0x02 ) >> 1 ;
+        if ( data == 0x01 )
+            XGINew_DDR2x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+        else
+            XGINew_DDR1x_MRS_340( pVBInfo->P3c4, pVBInfo ) ;
+    }
+    else
+        XGINew_DDR2_MRS_XG20( HwDeviceExtension, pVBInfo->P3c4, pVBInfo);
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister( PVB_DEVICE_INFO pVBInfo)
+{
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+      XGINew_SDR_MRS(pVBInfo ) ;
+    }
+    else
+    {
+      /* SR16 <- 0F,CF,0F,8F */
+      XGINew_DDR_MRS( pVBInfo ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
+    data &= 0xF8 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , data ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableRefresh */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DisableChannelInterleaving */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DisableChannelInterleaving( int index , USHORT XGINew_DDRDRAM_TYPE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+    data &= 0x1F ;
+
+    switch( XGINew_DDRDRAM_TYPE[ index ][ 3 ] )
+    {
+        case 64:
+            data |= 0 ;
+            break ;
+        case 32:
+            data |= 0x20 ;
+            break ;
+        case 16:
+            data |= 0x40 ;
+            break ;
+        case 4:
+            data |= 0x60 ;
+            break ;
+        default:
+            break ;
+    }
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizingType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMSizingType( int index , USHORT DRAMTYPE_TABLE[][ 5 ] ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+
+    data = DRAMTYPE_TABLE[ index ][ 4 ] ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x13 , 0x80 , data ) ;
+    DelayUS( 15 ) ;
+   /* should delay 50 ns */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBusWidth_310 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    PULONG volatile pVideoMemory ;
+
+    pVideoMemory = (PULONG) pVBInfo->FBAddr;
+
+    if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x12 ) ;
+        /* should delay */
+        XGINew_SDR_MRS( pVBInfo ) ;
+
+        XGINew_ChannelAB = 0 ;
+        XGINew_DataBusWidth = 128 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xFFFFFFFFL ;
+        pVideoMemory[ 7 ] = 0xFFFFFFFFL ;
+
+        if ( ( pVideoMemory[ 3 ] != 0xCDEF0123L ) || ( pVideoMemory[ 2 ] != 0x89ABCDEFL ) )
+        {
+            /* ChannelA64Bit */
+            XGINew_DataBusWidth = 64 ;
+            XGINew_ChannelAB = 0 ;
+            data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( data & 0xFD ) ) ;
+        }
+
+        if ( ( pVideoMemory[ 1 ] != 0x456789ABL ) || ( pVideoMemory[ 0 ] != 0x01234567L ) )
+        {
+            /* ChannelB64Bit */
+            XGINew_DataBusWidth = 64 ;
+            XGINew_ChannelAB = 1 ;
+            data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( ( data & 0xFD ) | 0x01 ) ) ;
+        }
+
+        return ;
+    }
+    else
+    {
+        /* DDR Dual channel */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x00 ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x02 ) ;	/* Channel A, 64bit */
+        /* should delay */
+        XGINew_DDR_MRS( pVBInfo ) ;
+
+        XGINew_ChannelAB = 0 ;
+        XGINew_DataBusWidth = 64 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+        pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+        if ( pVideoMemory[ 1 ] == 0x456789ABL )
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel A 64bit */
+                return ;
+            }
+        }
+        else
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel A 32bit */
+                XGINew_DataBusWidth = 32 ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x00 ) ;
+                return ;
+            }
+        }
+
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x03 ) ;	/* Channel B, 64bit */
+        XGINew_DDR_MRS( pVBInfo);
+
+        XGINew_ChannelAB = 1 ;
+        XGINew_DataBusWidth = 64 ;
+        pVideoMemory[ 0 ] = 0x01234567L ;
+        pVideoMemory[ 1 ] = 0x456789ABL ;
+        pVideoMemory[ 2 ] = 0x89ABCDEFL ;
+        pVideoMemory[ 3 ] = 0xCDEF0123L ;
+        pVideoMemory[ 4 ] = 0x55555555L ;
+        pVideoMemory[ 5 ] = 0x55555555L ;
+        pVideoMemory[ 6 ] = 0xAAAAAAAAL ;
+        pVideoMemory[ 7 ] = 0xAAAAAAAAL ;
+
+        if ( pVideoMemory[ 1 ] == 0x456789ABL )
+        {
+            /* Channel B 64 */
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel B 64bit */
+                return ;
+            }
+            else
+            {
+                /* error */
+            }
+        }
+        else
+        {
+            if ( pVideoMemory[ 0 ] == 0x01234567L )
+            {
+                /* Channel B 32 */
+                XGINew_DataBusWidth = 32 ;
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x01 ) ;
+            }
+            else
+            {
+                /* error */
+            }
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetRank( int index , UCHAR RankNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    int RankSize ;
+
+    if ( ( RankNo == 2 ) && ( DRAMTYPE_TABLE[ index ][ 0 ] == 2 ) )
+        return 0 ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] / 2 * XGINew_DataBusWidth / 32 ;
+
+    if ( ( RankNo * RankSize ) <= 128 )
+    {
+        data = 0 ;
+
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+        data |= ( RankNo - 1 ) << 2 ;
+        data |= ( XGINew_DataBusWidth / 64 ) & 2 ;
+        data |= XGINew_ChannelAB ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+        /* should delay */
+        XGINew_SDR_MRS( pVBInfo ) ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDDRChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SetDDRChannel( int index , UCHAR ChannelNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT  data ;
+    int RankSize ;
+
+    RankSize = DRAMTYPE_TABLE[index][3]/2 * XGINew_DataBusWidth/32;
+    /* RankSize = DRAMTYPE_TABLE[ index ][ 3 ] ; */
+    if ( ChannelNo * RankSize <= 128 )
+    {
+        data = 0 ;
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        if ( ChannelNo == 2 )
+            data |= 0x0C ;
+
+        data |= ( XGINew_DataBusWidth / 32 ) & 2 ;
+        data |= XGINew_ChannelAB ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+        /* should delay */
+        XGINew_DDR_MRS( pVBInfo ) ;
+        return( 1 ) ;
+    }
+    else
+        return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckColumn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckColumn( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    /* Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 1 ) ; */
+    Increment = 1 << ( 10 + XGINew_DataBusWidth / 64 ) ;
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+#ifdef WIN2000  /* chiawen for linux solution */
+    DelayUS( 100 ) ;
+#endif
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckBanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckBanks( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 2 ) ;
+
+    for( i = 0 , Position = 0 ; i < 4 ; i++ )
+    {
+        /* pVBInfo->FBAddr[ Position ] = Position ; */
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+    for( i = 0 , Position = 0 ; i < 4 ; i++ )
+    {
+        /* if (pVBInfo->FBAddr[ Position ] != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Increment , Position ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+                  DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* pVBInfo->FBAddr[ Position ] = Position ; */
+        /* *( ( PULONG )( pVBInfo->FBAddr ) ) = Position ; */
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+        Position += Increment ;
+    }
+
+    for( i = 0 , Position = 0 ; i < 2 ; i++ )
+    {
+        /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
+        /* if ( ( *( PULONG )( pVBInfo->FBAddr ) ) != Position ) */
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+        Position += Increment ;
+    }
+    return( 1 );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRank */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    ULONG Increment , Position ;
+    USHORT data ;
+
+    Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
+                       DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
+
+    Increment += Increment / 2 ;
+
+    Position = 0;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 0 ) ) = 0x01234567 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 1 ) ) = 0x456789AB ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 2 ) ) = 0x55555555 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 3 ) ) = 0x55555555 ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 4 ) ) = 0xAAAAAAAA ;
+    *( ( PULONG )( pVBInfo->FBAddr + Position + 5 ) ) = 0xAAAAAAAA ;
+
+    if ( ( *( PULONG )( pVBInfo->FBAddr + 1 ) ) == 0x456789AB )
+        return( 1 ) ;
+
+    if ( ( *( PULONG )( pVBInfo->FBAddr + 0 ) ) == 0x01234567 )
+        return( 0 ) ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
+    data &= 0xF3 ;
+    data |= 0x0E ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
+    data += 0x20 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , data ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int r ;
+
+    for( r = RankNo ; r >= 1 ; r-- )
+    {
+        if ( !XGINew_CheckRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+            return( 0 ) ;
+    }
+
+    if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckDDRRanks */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_CheckDDRRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    int r ;
+
+    for( r = RankNo ; r >= 1 ; r-- )
+    {
+        if ( !XGINew_CheckDDRRank( r , index , DRAMTYPE_TABLE, pVBInfo ) )
+            return( 0 ) ;
+    }
+
+    if ( !XGINew_CheckBanks( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    if ( !XGINew_CheckColumn( index , DRAMTYPE_TABLE, pVBInfo ) )
+        return( 0 ) ;
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+    int    i ;
+    UCHAR  j ;
+
+    for( i = 0 ; i < 13 ; i++ )
+    {
+        XGINew_SetDRAMSizingType( i , XGINew_SDRDRAM_TYPE , pVBInfo) ;
+
+        for( j = 2 ; j > 0 ; j-- )
+        {
+            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_SDRDRAM_TYPE , pVBInfo) )
+                continue ;
+            else
+            {
+                if ( XGINew_CheckRanks( j , i , XGINew_SDRDRAM_TYPE, pVBInfo) )
+                    return( 1 ) ;
+            }
+        }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSizeReg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSizeReg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data = 0 , memsize = 0 ;
+    int RankSize ;
+    UCHAR ChannelNo ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 32 ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+    data &= 0x80 ;
+
+    if ( data == 0x80 )
+        RankSize *= 2 ;
+
+    data = 0 ;
+
+    if( XGINew_ChannelAB == 3 )
+        ChannelNo = 4 ;
+    else
+        ChannelNo = XGINew_ChannelAB ;
+
+    if ( ChannelNo * RankSize <= 256 )
+    {
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        memsize = data >> 4 ;
+
+        /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+
+       /* data |= XGINew_ChannelAB << 2 ; */
+       /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+       /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+        /* should delay */
+        /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+    }
+    return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMSize20Reg */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGINew_SetDRAMSize20Reg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data = 0 , memsize = 0 ;
+    int RankSize ;
+    UCHAR ChannelNo ;
+
+    RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 8 ;
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
+    data &= 0x80 ;
+
+    if ( data == 0x80 )
+        RankSize *= 2 ;
+
+    data = 0 ;
+
+    if( XGINew_ChannelAB == 3 )
+        ChannelNo = 4 ;
+    else
+        ChannelNo = XGINew_ChannelAB ;
+
+    if ( ChannelNo * RankSize <= 256 )
+    {
+        while( ( RankSize >>= 1 ) > 0 )
+        {
+            data += 0x10 ;
+        }
+
+        memsize = data >> 4 ;
+
+        /* [2004/03/25] Vicent, Fix DRAM Sizing Error */
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) & 0x0F ) | ( data & 0xF0 ) ) ;
+	DelayUS( 15 ) ;
+
+       /* data |= XGINew_ChannelAB << 2 ; */
+       /* data |= ( XGINew_DataBusWidth / 64 ) << 1 ; */
+       /* XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , data ) ; */
+
+        /* should delay */
+        /* XGINew_SetDRAMModeRegister340( pVBInfo ) ; */
+    }
+    return( memsize ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_ReadWriteRest */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_ReadWriteRest( USHORT StopAddr , USHORT StartAddr, PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    ULONG Position = 0 ;
+
+   *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+
+    for( i = StartAddr ; i <= StopAddr ; i++ )
+    {
+        Position = 1 << i ;
+        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+    }
+
+    DelayUS( 500 ) ;	/* [Vicent] 2004/04/16. Fix #1759 Memory Size error in Multi-Adapter. */
+
+    Position = 0 ;
+
+   if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+        return( 0 ) ;
+
+    for( i = StartAddr ; i <= StopAddr ; i++ )
+    {
+        Position = 1 << i ;
+        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
+            return( 0 ) ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckFrequence */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_CheckFrequence( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+
+    if ( ( data & 0x10 ) == 0 )
+    {
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x39 ) ;
+        data = ( data & 0x02 ) >> 1 ;
+        return( data ) ;
+    }
+    else
+        return( data & 0x01 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_CheckChannel */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_CheckChannel( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR data;
+
+    switch( HwDeviceExtension->jChipType )
+    {
+      case XG20:
+      case XG21:
+          data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
+          data = data & 0x01;
+          XGINew_ChannelAB = 1 ;		/* XG20 "JUST" one channel */
+
+          if ( data == 0 )  /* Single_32_16 */
+          {
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x1000000)
+	      {
+
+                XGINew_DataBusWidth = 32 ;	/* 32 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* 22bit + 2 rank + 32bit */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+		DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                    return ;
+
+		if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+		{
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* 22bit + 1 rank + 32bit */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+		  DelayUS( 15 ) ;
+
+                  if ( XGINew_ReadWriteRest( 23 , 23 , pVBInfo ) == 1 )
+                      return ;
+                }
+	      }
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+	      {
+	        XGINew_DataBusWidth = 16 ;	/* 16 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* 22bit + 2 rank + 16bit */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ;
+		DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                    return ;
+                else
+                    XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;
+                    DelayUS( 15 ) ;
+              }
+
+          }
+          else  /* Dual_16_8 */
+          {
+              if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x800000)
+              {
+
+                XGINew_DataBusWidth = 16 ;	/* 16 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* (0x31:12x8x2) 22bit + 2 rank */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x41 ) ;  /* 0x41:16Mx16 bit*/
+                DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                    return ;
+
+		if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+		{
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* (0x31:12x8x2) 22bit + 1 rank */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31 ) ;  /* 0x31:8Mx16 bit*/
+                  DelayUS( 15 ) ;
+
+                  if ( XGINew_ReadWriteRest( 22 , 22 , pVBInfo ) == 1 )
+                      return ;
+                }
+	      }
+
+
+	      if (( HwDeviceExtension->ulVideoMemorySize - 1 ) > 0x400000)
+	      {
+	        XGINew_DataBusWidth = 8 ;	/* 8 bits */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xB1 ) ;  /* (0x31:12x8x2) 22bit + 2 rank */
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ;  /* 0x30:8Mx8 bit*/
+                DelayUS( 15 ) ;
+
+                if ( XGINew_ReadWriteRest( 22 , 21 , pVBInfo ) == 1 )
+                    return ;
+                else
+                    XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x31 ) ;  /* (0x31:12x8x2) 22bit + 1 rank */
+                    DelayUS( 15 ) ;
+              }
+          }
+          break ;
+
+      case XG27:
+          XGINew_DataBusWidth = 16 ;	/* 16 bits */
+          XGINew_ChannelAB = 1 ;		/* Single channel */
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x51 ) ;  /* 32Mx16 bit*/
+          break ;
+      case XG41:
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 3 ;		/* Quad Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x49 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 3 ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+
+              if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+                  return ;
+              else
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x39 ) ;
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x53 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* Dual channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+
+              if ( XGINew_ReadWriteRest( 8 , 4 , pVBInfo ) == 1 )
+                  return ;
+              else
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x43 ) ;
+          }
+
+          break ;
+
+      case XG42:
+/*
+      	  XG42 SR14 D[3] Reserve
+      	  	    D[2] = 1, Dual Channel
+      	  	         = 0, Single Channel
+
+      	  It's Different from Other XG40 Series.
+*/
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )	/* DDRII, DDR2x */
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 2 ;		/* 2 Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x44 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x34 ) ;
+              if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 1 ;		/* Single Channel */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x40 ) ;
+
+              if ( XGINew_ReadWriteRest( 23 , 22 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x30 ) ;
+              }
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 1 ;		/* 1 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x52 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x42 ) ;
+              }
+          }
+
+          break ;
+
+      default:	/* XG40 */
+
+          if ( XGINew_CheckFrequence(pVBInfo) == 1 )	/* DDRII */
+          {
+              XGINew_DataBusWidth = 32 ;	/* 32 bits */
+              XGINew_ChannelAB = 3 ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4C ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_ChannelAB = 2 ;		/* 2 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x48 ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  return ;
+
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x3C ) ;
+
+              if ( XGINew_ReadWriteRest( 24 , 23 , pVBInfo ) == 1 )
+                  XGINew_ChannelAB = 3 ;	/* 4 channels */
+              else
+              {
+                  XGINew_ChannelAB = 2 ;	/* 2 channels */
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x38 ) ;
+              }
+          }
+          else
+          {					/* DDR */
+              XGINew_DataBusWidth = 64 ;	/* 64 bits */
+              XGINew_ChannelAB = 2 ;		/* 2 channels */
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0xA1 ) ;
+              XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x5A ) ;
+
+              if ( XGINew_ReadWriteRest( 25 , 24 , pVBInfo ) == 1 )
+                  return ;
+              else
+              {
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , 0x21 ) ;
+                  XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x4A ) ;
+              }
+          }
+      	  break ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing340 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    int i ;
+    USHORT memsize , addr ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , 0x00 ) ;	/* noninterleaving */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1C , 0x00 ) ;	/* nontiling */
+    XGINew_CheckChannel( HwDeviceExtension, pVBInfo ) ;
+
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+      for( i = 0 ; i < 12 ; i++ )
+      {
+        XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+        memsize = XGINew_SetDRAMSize20Reg( i , XGINew_DDRDRAM_TYPE20, pVBInfo ) ;
+        if ( memsize == 0 )
+            continue ;
+
+        addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+            continue ;
+
+        if ( XGINew_ReadWriteRest( addr , 5, pVBInfo ) == 1 )
+            return( 1 ) ;
+      }
+    }
+    else
+    {
+      for( i = 0 ; i < 4 ; i++ )
+      {
+    	XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+        memsize = XGINew_SetDRAMSizeReg( i , XGINew_DDRDRAM_TYPE340, pVBInfo ) ;
+
+        if ( memsize == 0 )
+            continue ;
+
+        addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
+        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+            continue ;
+
+        if ( XGINew_ReadWriteRest( addr , 9, pVBInfo ) == 1 )
+            return( 1 ) ;
+      }
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDRSizing */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
+{
+    int    i ;
+    UCHAR  j ;
+
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        XGINew_SetDRAMSizingType( i , XGINew_DDRDRAM_TYPE, pVBInfo ) ;
+        XGINew_DisableChannelInterleaving( i , XGINew_DDRDRAM_TYPE , pVBInfo) ;
+        for( j = 2 ; j > 0 ; j-- )
+        {
+            XGINew_SetDDRChannel( i , j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE , pVBInfo ) ;
+            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE, pVBInfo ) )
+                continue ;
+            else
+            {
+                if ( XGINew_CheckDDRRanks( j , i , XGINew_DDRDRAM_TYPE,  pVBInfo ) )
+                return( 1 ) ;
+            }
+        }
+    }
+    return( 0 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetMemoryClock */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x28 , pVBInfo->MCLKData[ XGINew_RAMType ].SR28 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x29 , pVBInfo->MCLKData[ XGINew_RAMType ].SR29 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2A , pVBInfo->MCLKData[ XGINew_RAMType ].SR2A ) ;
+
+
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , pVBInfo->ECLKData[ XGINew_RAMType ].SR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , pVBInfo->ECLKData[ XGINew_RAMType ].SR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x30 , pVBInfo->ECLKData[ XGINew_RAMType ].SR30 ) ;
+
+    /* [Vicent] 2004/07/07, When XG42 ECLK = MCLK = 207MHz, Set SR32 D[1:0] = 10b */
+    /* [Hsuan] 2004/08/20, Modify SR32 value, when MCLK=207MHZ, ELCK=250MHz, Set SR32 D[1:0] = 10b */
+    if ( HwDeviceExtension->jChipType == XG42 )
+    {
+      if ( ( pVBInfo->MCLKData[ XGINew_RAMType ].SR28 == 0x1C ) && ( pVBInfo->MCLKData[ XGINew_RAMType ].SR29 == 0x01 )
+        && ( ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x1C ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) )
+        || ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x22 ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) ) ) )
+      {
+      	XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) & 0xFC ) | 0x02 ) ;
+      }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : ChkLFB */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN ChkLFB( PVB_DEVICE_INFO pVBInfo )
+{
+    if ( LFBDRAMTrap & XGINew_GetReg1( pVBInfo->P3d4 , 0x78 ) )
+        return( TRUE ) ;
+    else
+        return( FALSE );
+}
+
+
+/* --------------------------------------------------------------------- */
+/* input : dx ,valid value : CR or second chip's CR */
+/*  */
+/* SetPowerConsume : */
+/* Description: reduce 40/43 power consumption in first chip or */
+/* in second chip, assume CR A1 D[6]="1" in this case */
+/* output : none */
+/* --------------------------------------------------------------------- */
+void SetPowerConsume ( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG XGI_P3d4Port )
+{
+    ULONG   lTemp ;
+    UCHAR   bTemp;
+
+    HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x08 , 0 , &lTemp ) ; /* Get */
+    if ((lTemp&0xFF)==0)
+    {
+        /* set CR58 D[5]=0 D[3]=0 */
+        XGINew_SetRegAND( XGI_P3d4Port , 0x58 , 0xD7 ) ;
+        bTemp = (UCHAR) XGINew_GetReg1( XGI_P3d4Port , 0xCB ) ;
+    	if (bTemp&0x20)
+    	{
+            if (!(bTemp&0x10))
+            {
+            	XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x20 ) ; /* CR58 D[5]=1 D[3]=0 */
+            }
+            else
+            {
+            	XGINew_SetRegANDOR( XGI_P3d4Port , 0x58 , 0xD7 , 0x08 ) ; /* CR58 D[5]=0 D[3]=1 */
+            }
+
+    	}
+
+    }
+}
+
+
+
+#if defined(LINUX_XF86)||defined(LINUX_KERNEL)
+void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+	/* ULONG ROMAddr = (ULONG)HwDeviceExtension->pjVirtualRomBase; */
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+    if ( HwDeviceExtension->jChipType < XG20 )                  /* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;         /* Run XGI_GetVBType before InitTo330Pointer */
+
+	switch(HwDeviceExtension->jChipType)
+	{
+	case XG40:
+	case XG41:
+	case XG42:
+	case XG20:
+	case XG21:
+	default:
+		InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+		return ;
+	}
+
+}
+#endif /* For Linux */
+
+/* --------------------------------------------------------------------- */
+/* Function : ReadVBIOSTablData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
+{
+    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+    ULONG   i ;
+    UCHAR   j , k ;
+#if 0
+    ULONG   ii , jj ;
+    i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;		/* UniROM */
+    if ( i != 0 )
+        UNIROM = 1 ;
+
+    ii = 0x90 ;
+    for( jj = 0x00 ; jj < 0x08 ; jj++ )
+    {
+        pVBInfo->MCLKData[ jj ].SR28 = pVideoMemory[ ii ] ;
+        pVBInfo->MCLKData[ jj ].SR29 = pVideoMemory[ ii + 1] ;
+        pVBInfo->MCLKData[ jj ].SR2A = pVideoMemory[ ii + 2] ;
+        pVBInfo->MCLKData[ jj ].CLOCK = pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+        ii += 0x05 ;
+    }
+
+    ii = 0xB8 ;
+    for( jj = 0x00 ; jj < 0x08 ; jj++ )
+    {
+        pVBInfo->ECLKData[ jj ].SR2E = pVideoMemory[ ii ] ;
+        pVBInfo->ECLKData[ jj ].SR2F=pVideoMemory[ ii + 1 ] ;
+        pVBInfo->ECLKData[ jj ].SR30= pVideoMemory[ ii + 2 ] ;
+        pVBInfo->ECLKData[ jj ].CLOCK= pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
+        ii += 0x05 ;
+    }
+
+    /* Volari customize data area start */
+    /* if ( ChipType == XG40 ) */
+    if ( ChipType >= XG40 )
+    {
+        ii = 0xE0 ;
+        for( jj = 0x00 ; jj < 0x03 ; jj++ )
+        {
+            pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR13, SR14, and SR18 */
+            pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+        ii = 0x110 ;
+        jj = 0x03 ;
+        pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR1B */
+        pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+        pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+        pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+        pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+        pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+        pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+        pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+
+        *pVBInfo->pSR07 = pVideoMemory[ 0x74 ] ;
+        *pVBInfo->pSR1F = pVideoMemory[ 0x75 ] ;
+        *pVBInfo->pSR21 = pVideoMemory[ 0x76 ] ;
+        *pVBInfo->pSR22 = pVideoMemory[ 0x77 ] ;
+        *pVBInfo->pSR23 = pVideoMemory[ 0x78 ] ;
+        *pVBInfo->pSR24 = pVideoMemory[ 0x79 ] ;
+        pVBInfo->SR25[ 0 ] = pVideoMemory[ 0x7A ] ;
+        *pVBInfo->pSR31 = pVideoMemory[ 0x7B ] ;
+        *pVBInfo->pSR32 = pVideoMemory[ 0x7C ] ;
+        *pVBInfo->pSR33 = pVideoMemory[ 0x7D ] ;
+        ii = 0xF8 ;
+
+        for( jj = 0 ; jj < 3 ; jj++ )
+        {
+            pVBInfo->CR40[ jj ][ 0 ] = pVideoMemory[ ii ] ;
+            pVBInfo->CR40[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->CR40[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->CR40[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->CR40[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->CR40[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->CR40[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->CR40[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+
+        ii = 0x118 ;
+        for( j = 3 ; j < 24 ; j++ )
+        {
+            pVBInfo->CR40[ j ][ 0 ] = pVideoMemory[ ii ] ;
+            pVBInfo->CR40[ j ][ 1 ] = pVideoMemory[ ii + 1 ] ;
+            pVBInfo->CR40[ j ][ 2 ] = pVideoMemory[ ii + 2 ] ;
+            pVBInfo->CR40[ j ][ 3 ] = pVideoMemory[ ii + 3 ] ;
+            pVBInfo->CR40[ j ][ 4 ] = pVideoMemory[ ii + 4 ] ;
+            pVBInfo->CR40[ j ][ 5 ] = pVideoMemory[ ii + 5 ] ;
+            pVBInfo->CR40[ j ][ 6 ] = pVideoMemory[ ii + 6 ] ;
+            pVBInfo->CR40[ j ][ 7 ] = pVideoMemory[ ii + 7 ] ;
+            ii += 0x08 ;
+        }
+
+        i = pVideoMemory[ 0x1C0 ] | ( pVideoMemory[ 0x1C1 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 4 ; k++ )
+                pVBInfo->CR6B[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C2 ] | ( pVideoMemory[ 0x1C3 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 4 ; k++ )
+                pVBInfo->CR6E[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C4 ] | ( pVideoMemory[ 0x1C5 ] << 8 ) ;
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 32 ; k++ )
+                pVBInfo->CR6F[ j ][ k ] = pVideoMemory[ i + 32 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C6 ] | ( pVideoMemory[ 0x1C7 ] << 8 ) ;
+
+        for( j = 0 ; j < 8 ; j++ )
+        {
+            for( k = 0 ; k < 2 ; k++ )
+                pVBInfo->CR89[ j ][ k ] = pVideoMemory[ i + 2 * j + k ] ;
+        }
+
+        i = pVideoMemory[ 0x1C8 ] | ( pVideoMemory[ 0x1C9 ] << 8 ) ;
+        for( j = 0 ; j < 12 ; j++ )
+            pVBInfo->AGPReg[ j ] = pVideoMemory[ i + j ] ;
+
+        i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;
+        for( j = 0 ; j < 4 ; j++ )
+            pVBInfo->SR16[ j ] = pVideoMemory[ i + j ] ;
+
+        if ( ChipType == XG21 )
+        {
+            if (pVideoMemory[ 0x67 ] & 0x80)
+            {
+                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+            }
+            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+            {
+                *pVBInfo->pCR2E = pVideoMemory[ i + 4 ] ;
+                *pVBInfo->pCR2F = pVideoMemory[ i + 5 ] ;
+                *pVBInfo->pCR46 = pVideoMemory[ i + 6 ] ;
+                *pVBInfo->pCR47 = pVideoMemory[ i + 7 ] ;
+            }
+        }
+
+        if ( ChipType == XG27 )
+        {
+            jj = i+j;
+            for( i = 0 ; i <= 0xB ; i++,jj++ )
+              pVBInfo->pCRD0[i] = pVideoMemory[ jj ] ;
+            for( i = 0x0 ; i <= 0x1 ; i++,jj++ )
+              pVBInfo->pCRDE[i] = pVideoMemory[ jj ] ;
+
+            *pVBInfo->pSR40 = pVideoMemory[ jj ] ;
+            jj++;
+            *pVBInfo->pSR41 = pVideoMemory[ jj ] ;
+
+            if (pVideoMemory[ 0x67 ] & 0x80)
+            {
+                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
+            }
+            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
+            {
+                jj++;
+                *pVBInfo->pCR2E = pVideoMemory[ jj ] ;
+                *pVBInfo->pCR2F = pVideoMemory[ jj + 1 ] ;
+                *pVBInfo->pCR46 = pVideoMemory[ jj + 2 ] ;
+                *pVBInfo->pCR47 = pVideoMemory[ jj + 3 ] ;
+            }
+
+        }
+
+        *pVBInfo->pCRCF = pVideoMemory[ 0x1CA ] ;
+        *pVBInfo->pXGINew_DRAMTypeDefinition = pVideoMemory[ 0x1CB ] ;
+        *pVBInfo->pXGINew_I2CDefinition = pVideoMemory[ 0x1D1 ] ;
+        if ( ChipType >= XG20 )
+        {
+           *pVBInfo->pXGINew_CR97 = pVideoMemory[ 0x1D2 ] ;
+           if ( ChipType == XG27 )
+           {
+             *pVBInfo->pSR36 = pVideoMemory[ 0x1D3 ] ;
+             *pVBInfo->pCR8F = pVideoMemory[ 0x1D5 ] ;
+           }
+        }
+
+    }
+#endif
+    /* Volari customize data area end */
+
+    if ( ChipType == XG21 )
+    {
+        pVBInfo->IF_DEF_LVDS = 0 ;
+        if (pVideoMemory[ 0x65 ] & 0x1)
+        {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+            i = pVideoMemory[ 0x316 ] | ( pVideoMemory[ 0x317 ] << 8 );
+            j = pVideoMemory[ i-1 ] ;
+            if ( j != 0xff )
+            {
+              k = 0;
+              do
+              {
+                pVBInfo->XG21_LVDSCapList[k].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+                pVBInfo->XG21_LVDSCapList[k].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+                pVBInfo->XG21_LVDSCapList[k].VCLKData1 = pVideoMemory[ i + 18 ] ;
+                pVBInfo->XG21_LVDSCapList[k].VCLKData2 = pVideoMemory[ i + 19 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S1 = pVideoMemory[ i + 20 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S2 = pVideoMemory[ i + 21 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S3 = pVideoMemory[ i + 22 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S4 = pVideoMemory[ i + 23 ] ;
+                pVBInfo->XG21_LVDSCapList[k].PSC_S5 = pVideoMemory[ i + 24 ] ;
+                i += 25;
+                j--;
+                k++;
+              } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+            }
+            else
+            {
+            pVBInfo->XG21_LVDSCapList[0].LVDS_Capability = pVideoMemory[ i ] | ( pVideoMemory[ i + 1 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHT = pVideoMemory[ i + 2 ] | ( pVideoMemory[ i + 3 ] << 8 ) ;
+            pVBInfo->XG21_LVDSCapList[0].LVDSVT = pVideoMemory[ i + 4 ] | ( pVideoMemory[ i + 5 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHDE = pVideoMemory[ i + 6 ] | ( pVideoMemory[ i + 7 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVDE = pVideoMemory[ i + 8 ] | ( pVideoMemory[ i + 9 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHFP = pVideoMemory[ i + 10 ] | ( pVideoMemory[ i + 11 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVFP = pVideoMemory[ i + 12 ] | ( pVideoMemory[ i + 13 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSHSYNC = pVideoMemory[ i + 14 ] | ( pVideoMemory[ i + 15 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].LVDSVSYNC = pVideoMemory[ i + 16 ] | ( pVideoMemory[ i + 17 ] << 8 );
+            pVBInfo->XG21_LVDSCapList[0].VCLKData1 = pVideoMemory[ i + 18 ] ;
+            pVBInfo->XG21_LVDSCapList[0].VCLKData2 = pVideoMemory[ i + 19 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S1 = pVideoMemory[ i + 20 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S2 = pVideoMemory[ i + 21 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S3 = pVideoMemory[ i + 22 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S4 = pVideoMemory[ i + 23 ] ;
+            pVBInfo->XG21_LVDSCapList[0].PSC_S5 = pVideoMemory[ i + 24 ] ;
+        }
+        }
+    }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_DDR1x_MRS_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+
+    XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x19 , 0x40 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x80 ) ;
+    DelayUS( 60 ) ;
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x01 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+    DelayUS( 1000 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x03 ) ;
+    DelayUS( 500 ) ;
+    /* XGINew_SetReg1( P3c4 , 0x18 , 0x31 ) ; */
+    XGINew_SetReg1( P3c4 , 0x18 , pVBInfo->SR15[ 2 ][ XGINew_RAMType ] ) ;	/* SR18 */
+    XGINew_SetReg1( P3c4 , 0x19 , 0x00 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x03 ) ;
+    XGINew_SetReg1( P3c4 , 0x16 , 0x83 ) ;
+    XGINew_SetReg1( P3c4 , 0x1B , 0x00 ) ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetDRAMModeRegister_XG20 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        XGINew_DDR2_MRS_XG20( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        //XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+        XGINew_DDRII_Bootup_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo) ;
+
+    //XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
+
+}
+/*
+void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+#ifndef LINUX_XF86
+    UCHAR data ;
+#endif
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
+    pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
+    pVBInfo->ISXPDOS = 0 ;
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    InitTo330Pointer(HwDeviceExtension->jChipType,pVBInfo);
+
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+
+    if ( XGINew_GetXG20DRAMType( HwDeviceExtension, pVBInfo) == 0 )
+        XGINew_DDR1x_MRS_XG20( pVBInfo->P3c4, pVBInfo ) ;
+    else
+        XGINew_DDR2_MRS_XG27( HwDeviceExtension , pVBInfo->P3c4 , pVBInfo ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
+}
+*/
+/* -------------------------------------------------------- */
+/* Function : XGINew_ChkSenseStatus */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx=0 , temp , tempcx , CR3CData;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
+
+    if ( temp & Monitor1Sense )
+    	tempbx |= ActiveCRT1 ;
+    if ( temp & LCDSense )
+    	tempbx |= ActiveLCD ;
+    if ( temp & Monitor2Sense )
+    	tempbx |= ActiveCRT2 ;
+    if ( temp & TVSense )
+    {
+    	tempbx |= ActiveTV ;
+    	if ( temp & AVIDEOSense )
+    	    tempbx |= ( ActiveAVideo << 8 );
+    	if ( temp & SVIDEOSense )
+    	    tempbx |= ( ActiveSVideo << 8 );
+    	if ( temp & SCARTSense )
+    	    tempbx |= ( ActiveSCART << 8 );
+    	if ( temp & HiTVSense )
+    	    tempbx |= ( ActiveHiTV << 8 );
+    	if ( temp & YPbPrSense )
+    	    tempbx |= ( ActiveYPbPr << 8 );
+    }
+
+    tempcx = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+    tempcx |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ) ;
+
+    if ( tempbx & tempcx )
+    {
+    	CR3CData = XGINew_GetReg1( pVBInfo->P3d4 , 0x3c ) ;
+    	if ( !( CR3CData & DisplayDeviceFromCMOS ) )
+    	{
+    	    tempcx = 0x1FF0 ;
+    	    if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+    	    {
+    	    	tempbx = 0x1FF0 ;
+    	    }
+    	}
+    }
+    else
+    {
+    	tempcx = 0x1FF0 ;
+    	if ( *pVBInfo->pSoftSetting & ModeSoftSetting )
+    	{
+    	    tempbx = 0x1FF0 ;
+    	}
+    }
+
+    tempbx &= tempcx ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x3d , ( tempbx & 0x00FF ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x3e , ( ( tempbx & 0xFF00 ) >> 8 )) ;
+}
+/* -------------------------------------------------------- */
+/* Function : XGINew_SetModeScratch */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , tempcl = 0 , tempch = 0 , CR31Data , CR38Data;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+    temp |= XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ;
+    temp |= ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & ( DriverMode >> 8) ) << 8 ;
+
+    if ( pVBInfo->IF_DEF_CRT2Monitor == 1)
+    {
+    	if ( temp & ActiveCRT2 )
+    	   tempcl = SetCRT2ToRAMDAC ;
+    }
+
+    if ( temp & ActiveLCD )
+    {
+    	tempcl |= SetCRT2ToLCD ;
+    	if  ( temp & DriverMode )
+    	{
+    	    if ( temp & ActiveTV )
+    	    {
+    	    	tempch = SetToLCDA | EnableDualEdge ;
+    	    	temp ^= SetCRT2ToLCD ;
+
+    	    	if ( ( temp >> 8 ) & ActiveAVideo )
+    	    	    tempcl |= SetCRT2ToAVIDEO ;
+    	    	if ( ( temp >> 8 ) & ActiveSVideo )
+    	    	    tempcl |= SetCRT2ToSVIDEO ;
+    	    	if ( ( temp >> 8 ) & ActiveSCART )
+    	    	    tempcl |= SetCRT2ToSCART ;
+
+    	    	if ( pVBInfo->IF_DEF_HiVision == 1 )
+    	    	{
+    	    	    if ( ( temp >> 8 ) & ActiveHiTV )
+    	    	    tempcl |= SetCRT2ToHiVisionTV ;
+    	    	}
+
+    	    	if ( pVBInfo->IF_DEF_YPbPr == 1 )
+    	    	{
+    	    	    if ( ( temp >> 8 ) & ActiveYPbPr )
+    	    	    tempch |= SetYPbPr ;
+    	    	}
+    	    }
+    	}
+    }
+    else
+    {
+    	if ( ( temp >> 8 ) & ActiveAVideo )
+    	   tempcl |= SetCRT2ToAVIDEO ;
+    	if ( ( temp >> 8 ) & ActiveSVideo )
+  	   tempcl |= SetCRT2ToSVIDEO ;
+    	if ( ( temp >> 8 ) & ActiveSCART )
+   	   tempcl |= SetCRT2ToSCART ;
+
+   	if ( pVBInfo->IF_DEF_HiVision == 1 )
+    	{
+    	   if ( ( temp >> 8 ) & ActiveHiTV )
+    	   tempcl |= SetCRT2ToHiVisionTV ;
+    	}
+
+    	if ( pVBInfo->IF_DEF_YPbPr == 1 )
+    	{
+    	   if ( ( temp >> 8 ) & ActiveYPbPr )
+    	   tempch |= SetYPbPr ;
+    	}
+    }
+
+
+    tempcl |= SetSimuScanMode ;
+    if ( (!( temp & ActiveCRT1 )) && ( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+       tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+    if ( ( temp & ActiveLCD ) && ( temp & ActiveTV ) )
+       tempcl ^= ( SetSimuScanMode | SwitchToCRT2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x30 , tempcl ) ;
+
+    CR31Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+    CR31Data &= ~( SetNotSimuMode >> 8 ) ;
+    if ( !( temp & ActiveCRT1 ) )
+        CR31Data |= ( SetNotSimuMode >> 8 ) ;
+    CR31Data &= ~( DisableCRT2Display >> 8 ) ;
+    if  (!( ( temp & ActiveLCD ) || ( temp & ActiveTV ) || ( temp & ActiveCRT2 ) ) )
+        CR31Data |= ( DisableCRT2Display >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x31 , CR31Data ) ;
+
+    CR38Data = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+    CR38Data &= ~SetYPbPr ;
+    CR38Data |= tempch ;
+    XGINew_SetReg1( pVBInfo->P3d4, 0x38 , CR38Data ) ;
+
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG21Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR Temp;
+    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+
+    pVBInfo->IF_DEF_LVDS = 0 ;
+
+#ifdef WIN2000
+   pVBInfo->IF_DEF_CH7007 = 0 ;
+    if ( ( pVideoMemory[ 0x65 ] & 0x02 ) )			/* For XG21 CH7007 */
+    {
+        /* VideoDebugPrint((0, "ReadVBIOSTablData: pVideoMemory[ 0x65 ] =%x\n",pVideoMemory[ 0x65 ])); */
+        pVBInfo->IF_DEF_CH7007 = 1 ;                            /* [Billy] 07/05/03 */
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x60 ) ; /* CH7007 on chip */
+    }
+    else
+#endif
+#if 1
+    if (( pVideoMemory[ 0x65 ] & 0x01 ) )			/* For XG21 LVDS */
+    {
+        pVBInfo->IF_DEF_LVDS = 1 ;
+        XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS on chip */
+    }
+    else
+    {
+#endif
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* Enable GPIOA/B read  */
+        Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0xC0;
+        if ( Temp == 0xC0 )
+        {								/* DVI & DVO GPIOA/B pull high */
+          XGINew_SenseLCD( HwDeviceExtension, pVBInfo ) ;
+          XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+          XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x20 , 0x20 ) ;   /* Enable read GPIOF */
+          Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x04 ;
+          if ( !Temp )
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x80 ) ; /* TMDS on chip */
+          else
+            XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* Only DVO on chip */
+          XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ;	    /* Disable read GPIOF */
+        }
+#if 1
+    }
+#endif
+}
+
+/* -------------------------------------------------------- */
+/* Function : XGINew_GetXG27Sense */
+/* Input : */
+/* Output : */
+/* Description : */
+/* -------------------------------------------------------- */
+void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR Temp,bCR4A;
+
+     pVBInfo->IF_DEF_LVDS = 0 ;
+     bCR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x07 , 0x07 ) ; /* Enable GPIOA/B/C read  */
+     Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) & 0x07;
+     XGINew_SetReg1( pVBInfo->P3d4, 0x4A , bCR4A ) ;
+
+     if ( Temp <= 0x02 )
+     {
+         pVBInfo->IF_DEF_LVDS = 1 ;
+         XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xC0 ) ; /* LVDS setting */
+         XGINew_SetReg1( pVBInfo->P3d4, 0x30 , 0x21 ) ;
+     }
+     else
+     {
+       XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0xA0 ) ; /* TMDS/DVO setting */
+     }
+     XGINew_SetRegOR( pVBInfo->P3d4 , 0x32 , LCDSense ) ;
+
+}
+
+UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR38,CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x10 , 0x10 ) ; /* enable GPIOE read */
+    CR38 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+    temp =0;
+    if ( ( CR38 & 0xE0 ) > 0x80 )
+    {
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+        temp &= 0x08;
+        temp >>= 3;
+    }
+
+    XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+    return temp;
+}
+
+UCHAR GetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* enable GPIOA/B/C read */
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+    if ( temp <= 2 )
+    {
+    	temp &= 0x03;
+    }
+    else
+    {
+    	temp = ((temp&0x04)>>1) || ((~temp)&0x01);
+    }
+    XGINew_SetReg1( pVBInfo->P3d4, 0x4A , CR4A ) ;
+
+    return temp;
+}
+
diff --git a/drivers/staging/xgifb/vb_init.h b/drivers/staging/xgifb/vb_init.h
new file mode 100644
index 0000000..1f39d9c
--- /dev/null
+++ b/drivers/staging/xgifb/vb_init.h
@@ -0,0 +1,7 @@
+#ifndef  _VBINIT_
+#define  _VBINIT_
+extern   BOOLEAN    XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension ) ;
+extern XGI21_LVDSCapStruct  XGI21_LCDCapList[13];
+
+#endif
+
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
new file mode 100644
index 0000000..bd7f738
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -0,0 +1,10736 @@
+#include "osdef.h"
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+#ifdef LINUX_KERNEL
+#include <asm/io.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include "XGIfb.h"
+/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
+#include <video/XGIfb.h>
+#else
+#include <linux/XGIfb.h>
+#endif*/
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+#include "vb_util.h"
+#include "vb_table.h"
+
+
+
+#define  IndexMask 0xff
+#ifndef XGI_MASK_DUAL_CHIP
+#define XGI_MASK_DUAL_CHIP	  0x04  /* SR3A */
+#endif
+
+
+
+BOOLEAN  XGI_IsLCDDualLink(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_BacklightByDrv(PVB_DEVICE_INFO pVBInfo);
+
+BOOLEAN  XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_AjustCRT2Rate(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,USHORT *i, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+BOOLEAN  XGI_BridgeIsOn(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_GetModePtr( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetColorDepth(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetVGAHT2(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetVCLK2Ptr(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
+void     XGI_VBLongWait(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SaveCRT2Info(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetCRT2Data(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetCRT2ResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_PreSetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLockRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup2(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetGroup5(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void*    XGI_GetLcdPtr(USHORT BX,  USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void*    XGI_GetTVPtr(USHORT BX, USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_EnablePWD( PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo);
+void     XGI_AutoThreshold( PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_DisplayOn(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetCRT1Group(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void     XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
+void	 XGI_UpdateXG21CRTC(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo, USHORT RefreshRateTableIndex);
+void     XGI_WaitDisply(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SenseCRT1(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetSeqRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetMiscRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRTCRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetATTRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetGRCRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_SetSync(USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1CRTC(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void     XGI_SetCRT1Timing_H(PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
+void     XGI_SetCRT1Timing_V(USHORT ModeIdIndex,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1DE(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1VCLK(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1FIFO(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1ModeRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetVCLKState(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
+
+void     XGI_LoadDAC(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
+void     XGI_WriteDAC(USHORT dl, USHORT ah, USHORT al, USHORT dh, PVB_DEVICE_INFO pVBInfo);
+/*void     XGI_ClearBuffer(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);*/
+void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetLVDSResInfo( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetLVDSData(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_ModCRT1Regs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_SetLVDSRegs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_UpdateModeInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
+void     XGI_SetCRT2ECLK( USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
+void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetLCDSync(USHORT* HSyncWidth, USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo);
+void 	 XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void  	 XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT2VCLK(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_OEM310Setting(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetDelayComp(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
+void     SetSpectrum(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetAntiFlicker(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetEdgeEnhance(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetPhaseIncr(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetYFilter(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
+void     XGI_CloseCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_OpenCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetRAMDAC2DATA(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
+void     XGINew_EnableCRT2(PVB_DEVICE_INFO pVBInfo);
+void     XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo);
+void     XGI_LongWait(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetCRT1Offset( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo );
+void     XGI_GetLCDVCLKPtr(UCHAR* di_0,UCHAR *di_1, PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+void     XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetLCDCapPtr(PVB_DEVICE_INFO pVBInfo);
+USHORT   XGI_GetLCDCapPtr1(PVB_DEVICE_INFO pVBInfo);
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+UCHAR    XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+void     XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+UCHAR    XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo );
+
+extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
+#ifdef WIN2000
+/* [Billy] 2007/05/17 For CH7007 */
+extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
+extern  UCHAR CH7007TVCRT1UNTSC_H[][10],CH7007TVCRT1ONTSC_H[][10],CH7007TVCRT1UPAL_H[][10],CH7007TVCRT1OPAL_H[][10] ;
+extern  UCHAR CH7007TVCRT1UNTSC_V[][10],CH7007TVCRT1ONTSC_V[][10],CH7007TVCRT1UPAL_V[][10],CH7007TVCRT1OPAL_V[][10] ;
+extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
+
+extern  BOOLEAN XGI_XG21CheckCH7007TVMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo ) ;
+extern  void SetCH7007Regs(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo ) ;
+extern  VP_STATUS TurnOnCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern  VP_STATUS TurnOffCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
+extern  BOOLEAN IsCH7007TVMode(PVB_DEVICE_INFO pVBInfo) ;
+#endif
+
+/* USHORT XGINew_flag_clearbuffer; 0: no clear frame buffer 1:clear frame buffer */
+
+
+
+
+
+USHORT XGINew_MDA_DAC[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
+               0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F};
+
+USHORT XGINew_CGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_EGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
+               0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
+               0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
+               0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
+               0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
+               0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
+               0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
+
+USHORT XGINew_VGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
+               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
+               0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
+               0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
+
+               0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
+               0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
+               0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
+               0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
+               0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
+               0x0B,0x0C,0x0D,0x0F,0x10};
+
+
+/* --------------------------------------------------------------------- */
+/* Function : InitTo330Pointer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
+{
+    pVBInfo->SModeIDTable = (XGI_StStruct *) XGI330_SModeIDTable ;
+    pVBInfo->StandTable = (XGI_StandTableStruct *) XGI330_StandTable ;
+    pVBInfo->EModeIDTable = (XGI_ExtStruct *) XGI330_EModeIDTable ;
+    pVBInfo->RefIndex = (XGI_Ext2Struct *) XGI330_RefIndex ;
+    pVBInfo->XGINEWUB_CRT1Table = (XGI_CRT1TableStruct *) XGI_CRT1Table ;
+
+    /* add for new UNIVGABIOS */
+    /* XGINew_UBLCDDataTable = (XGI_LCDDataTablStruct *) XGI_LCDDataTable ; */
+    /* XGINew_UBTVDataTable = (XGI_TVDataTablStruct *) XGI_TVDataTable ; */
+
+
+    if ( ChipType >= XG40 )
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI340New_MCLKData ;
+        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI340_ECLKData ;
+    }
+    else
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI330New_MCLKData ;
+        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI330_ECLKData ;
+    }
+
+    pVBInfo->VCLKData = (XGI_VCLKDataStruct *) XGI_VCLKData ;
+    pVBInfo->VBVCLKData = (XGI_VBVCLKDataStruct *) XGI_VBVCLKData ;
+    pVBInfo->ScreenOffset = XGI330_ScreenOffset ;
+    pVBInfo->StResInfo = (XGI_StResInfoStruct *) XGI330_StResInfo ;
+    pVBInfo->ModeResInfo = (XGI_ModeResInfoStruct *) XGI330_ModeResInfo ;
+
+    pVBInfo->pOutputSelect = &XGI330_OutputSelect ;
+    pVBInfo->pSoftSetting = &XGI330_SoftSetting ;
+    pVBInfo->pSR07 = &XGI330_SR07 ;
+    pVBInfo->LCDResInfo = 0 ;
+    pVBInfo->LCDTypeInfo = 0 ;
+    pVBInfo->LCDInfo = 0 ;
+    pVBInfo->VBInfo = 0 ;
+    pVBInfo->TVInfo = 0;
+
+
+    pVBInfo->SR15 = XGI340_SR13 ;
+    pVBInfo->CR40 = XGI340_cr41 ;
+    pVBInfo->SR25 = XGI330_sr25 ;
+    pVBInfo->pSR31 = &XGI330_sr31 ;
+    pVBInfo->pSR32 = &XGI330_sr32 ;
+    pVBInfo->CR6B = XGI340_CR6B ;
+    pVBInfo->CR6E = XGI340_CR6E ;
+    pVBInfo->CR6F = XGI340_CR6F ;
+    pVBInfo->CR89 = XGI340_CR89 ;
+    pVBInfo->AGPReg = XGI340_AGPReg ;
+    pVBInfo->SR16 = XGI340_SR16 ;
+    pVBInfo->pCRCF = &XG40_CRCF ;
+    pVBInfo->pXGINew_DRAMTypeDefinition = &XG40_DRAMTypeDefinition ;
+
+
+    pVBInfo->CR49 = XGI330_CR49 ;
+    pVBInfo->pSR1F = &XGI330_SR1F ;
+    pVBInfo->pSR21 = &XGI330_SR21 ;
+    pVBInfo->pSR22 = &XGI330_SR22 ;
+    pVBInfo->pSR23 = &XGI330_SR23 ;
+    pVBInfo->pSR24 = &XGI330_SR24 ;
+    pVBInfo->pSR33 = &XGI330_SR33 ;
+
+
+
+    pVBInfo->pCRT2Data_1_2 = &XGI330_CRT2Data_1_2 ;
+    pVBInfo->pCRT2Data_4_D = &XGI330_CRT2Data_4_D ;
+    pVBInfo->pCRT2Data_4_E = &XGI330_CRT2Data_4_E ;
+    pVBInfo->pCRT2Data_4_10 = &XGI330_CRT2Data_4_10 ;
+    pVBInfo->pRGBSenseData = &XGI330_RGBSenseData ;
+    pVBInfo->pVideoSenseData = &XGI330_VideoSenseData ;
+    pVBInfo->pYCSenseData = &XGI330_YCSenseData ;
+    pVBInfo->pRGBSenseData2 = &XGI330_RGBSenseData2 ;
+    pVBInfo->pVideoSenseData2 = &XGI330_VideoSenseData2 ;
+    pVBInfo->pYCSenseData2 = &XGI330_YCSenseData2 ;
+
+    pVBInfo->NTSCTiming = XGI330_NTSCTiming ;
+    pVBInfo->PALTiming = XGI330_PALTiming ;
+    pVBInfo->HiTVExtTiming = XGI330_HiTVExtTiming ;
+    pVBInfo->HiTVSt1Timing = XGI330_HiTVSt1Timing ;
+    pVBInfo->HiTVSt2Timing = XGI330_HiTVSt2Timing ;
+    pVBInfo->HiTVTextTiming = XGI330_HiTVTextTiming ;
+    pVBInfo->YPbPr750pTiming = XGI330_YPbPr750pTiming ;
+    pVBInfo->YPbPr525pTiming = XGI330_YPbPr525pTiming ;
+    pVBInfo->YPbPr525iTiming = XGI330_YPbPr525iTiming ;
+    pVBInfo->HiTVGroup3Data = XGI330_HiTVGroup3Data ;
+    pVBInfo->HiTVGroup3Simu = XGI330_HiTVGroup3Simu ;
+    pVBInfo->HiTVGroup3Text = XGI330_HiTVGroup3Text ;
+    pVBInfo->Ren525pGroup3 = XGI330_Ren525pGroup3 ;
+    pVBInfo->Ren750pGroup3 = XGI330_Ren750pGroup3 ;
+
+
+    pVBInfo->TimingH = (XGI_TimingHStruct *) XGI_TimingH ;
+    pVBInfo->TimingV = (XGI_TimingVStruct *) XGI_TimingV ;
+    pVBInfo->UpdateCRT1 = (XGI_XG21CRT1Struct *) XGI_UpdateCRT1Table ;
+
+    pVBInfo->CHTVVCLKUNTSC = XGI330_CHTVVCLKUNTSC ;
+    pVBInfo->CHTVVCLKONTSC = XGI330_CHTVVCLKONTSC ;
+    pVBInfo->CHTVVCLKUPAL = XGI330_CHTVVCLKUPAL ;
+    pVBInfo->CHTVVCLKOPAL = XGI330_CHTVVCLKOPAL ;
+
+    /* 310 customization related */
+    if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+        pVBInfo->LCDCapList = XGI_LCDDLCapList ;
+    else
+        pVBInfo->LCDCapList = XGI_LCDCapList ;
+
+    if ( ( ChipType == XG21 ) || ( ChipType == XG27 ) )
+        pVBInfo->XG21_LVDSCapList = XGI21_LCDCapList ;
+
+    pVBInfo->XGI_TVDelayList = XGI301TVDelayList ;
+    pVBInfo->XGI_TVDelayList2 = XGI301TVDelayList2 ;
+
+
+    pVBInfo->pXGINew_I2CDefinition = &XG40_I2CDefinition ;
+
+    if ( ChipType >= XG20 )
+    	pVBInfo->pXGINew_CR97 = &XG20_CR97 ;
+
+    if ( ChipType == XG27 )
+    {
+        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI27New_MCLKData ;
+        pVBInfo->CR40 = XGI27_cr41 ;
+    	pVBInfo->pXGINew_CR97 = &XG27_CR97 ;
+    	pVBInfo->pSR36 = &XG27_SR36 ;
+    	pVBInfo->pCR8F = &XG27_CR8F ;
+    	pVBInfo->pCRD0 = XG27_CRD0 ;
+    	pVBInfo->pCRDE = XG27_CRDE ;
+    	pVBInfo->pSR40 = &XG27_SR40 ;
+    	pVBInfo->pSR41 = &XG27_SR41 ;
+
+    }
+
+    if ( ChipType >= XG20 )
+    {
+    	pVBInfo->pDVOSetting = &XG21_DVOSetting ;
+    	pVBInfo->pCR2E = &XG21_CR2E ;
+    	pVBInfo->pCR2F = &XG21_CR2F ;
+    	pVBInfo->pCR46 = &XG21_CR46 ;
+    	pVBInfo->pCR47 = &XG21_CR47 ;
+    }
+
+}
+
+
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGISetModeNew */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
+{
+    USHORT ModeIdIndex ;
+        /* PUCHAR pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ; */
+    VB_DEVICE_INFO VBINF;
+    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
+    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->IF_DEF_LVDS = 0 ;
+    pVBInfo->IF_DEF_CH7005 = 0 ;
+    pVBInfo->IF_DEF_LCDA = 1 ;
+    pVBInfo->IF_DEF_CH7017 = 0 ;
+    pVBInfo->IF_DEF_CH7007 = 0 ;                                /* [Billy] 2007/05/14 */
+    pVBInfo->IF_DEF_VideoCapture = 0 ;
+    pVBInfo->IF_DEF_ScaleLCD = 0 ;
+    pVBInfo->IF_DEF_OEMUtil = 0 ;
+    pVBInfo->IF_DEF_PWD = 0 ;
+
+
+    if ( HwDeviceExtension->jChipType >= XG20 )			/* kuku 2004/06/25 */
+    {
+    	pVBInfo->IF_DEF_YPbPr = 0 ;
+        pVBInfo->IF_DEF_HiVision = 0 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+        pVBInfo->VBType = 0 ;  /*set VBType default 0*/
+    }
+    else if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        pVBInfo->IF_DEF_YPbPr = 1 ;
+        pVBInfo->IF_DEF_HiVision = 1 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 1 ;
+    }
+    else
+    {
+        pVBInfo->IF_DEF_YPbPr = 1 ;
+        pVBInfo->IF_DEF_HiVision = 1 ;
+        pVBInfo->IF_DEF_CRT2Monitor = 0 ;
+    }
+
+    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
+    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
+    pVBInfo->P3c0 = pVBInfo->BaseAddr + 0x10 ;
+    pVBInfo->P3ce = pVBInfo->BaseAddr + 0x1e ;
+    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
+    pVBInfo->P3cc = pVBInfo->BaseAddr + 0x1C ;
+    pVBInfo->P3ca = pVBInfo->BaseAddr + 0x1a ;
+    pVBInfo->P3c6 = pVBInfo->BaseAddr + 0x16 ;
+    pVBInfo->P3c7 = pVBInfo->BaseAddr + 0x17 ;
+    pVBInfo->P3c8 = pVBInfo->BaseAddr + 0x18 ;
+    pVBInfo->P3c9 = pVBInfo->BaseAddr + 0x19 ;
+    pVBInfo->P3da = pVBInfo->BaseAddr + 0x2A ;
+    pVBInfo->Part0Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_00 ;
+    pVBInfo->Part1Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_04 ;
+    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
+    pVBInfo->Part3Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_12 ;
+    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
+    pVBInfo->Part5Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 + 2 ;
+
+    if ( HwDeviceExtension->jChipType == XG21 )  /* for x86 Linux, XG21 LVDS */
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+        }
+    }
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+        if ( ( XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) & 0xE0 ) == 0xC0 )
+        {
+          if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) & 0x20 )
+          {
+            pVBInfo->IF_DEF_LVDS = 1 ;
+          }
+        }
+    }
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    XGI_GetVBType( pVBInfo ) ;
+
+    InitTo330Pointer( HwDeviceExtension->jChipType, pVBInfo ) ;
+#ifdef WIN2000
+    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
+#endif
+    if ( ModeNo & 0x80 )
+    {
+        ModeNo = ModeNo & 0x7F ;
+/* XGINew_flag_clearbuffer = 0 ; */
+    }
+/*    else
+    {
+        XGINew_flag_clearbuffer = 1 ;
+    }
+*/
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 1.Openkey */
+    XGI_UnLockCRT2( HwDeviceExtension , pVBInfo ) ;
+
+    XGI_SearchModeID( ModeNo , &ModeIdIndex, pVBInfo ) ;
+
+    XGI_GetVGAType(HwDeviceExtension,  pVBInfo) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+    {
+        XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+        XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+        XGI_DisableBridge( HwDeviceExtension,pVBInfo ) ;
+/*        XGI_OpenCRTC( HwDeviceExtension, pVBInfo ) ; */
+
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA ) )
+        {
+            XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            {
+                XGI_SetLCDAGroup(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+            }
+        }
+        else
+        {
+            if ( !( pVBInfo->VBInfo & SwitchToCRT2) )
+            {
+                XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    XGI_SetLCDAGroup( ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+                }
+            }
+        }
+
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SwitchToCRT2 ) )
+        {
+            switch( HwDeviceExtension->ujVBChipID )
+            {
+                case VB_CHIP_301:
+                    XGI_SetCRT2Group301( ModeNo , HwDeviceExtension, pVBInfo ) ;		/*add for CRT2 */
+                    break ;
+
+                case VB_CHIP_302:
+                    XGI_SetCRT2Group301(ModeNo , HwDeviceExtension, pVBInfo ) ;		/*add for CRT2 */
+                    break ;
+
+                default:
+                    break ;
+            }
+        }
+
+        XGI_SetCRT2ModeRegs( ModeNo, HwDeviceExtension,pVBInfo ) ;
+        XGI_OEM310Setting( ModeNo, ModeIdIndex,pVBInfo ) ; /*0212*/
+        XGI_CloseCRTC( HwDeviceExtension, pVBInfo ) ;
+        XGI_EnableBridge( HwDeviceExtension ,pVBInfo) ;
+    }	/* !XG20 */
+    else
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+
+            VideoDebugPrint((0, "XGISetModeNew: pVBIfo->IF_DEF_CH7007==1\n"));
+            pVBInfo->VBType = VB_CH7007 ;
+            XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
+            XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+            XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
+            if( !(XGI_XG21CheckCH7007TVMode(ModeNo, ModeIdIndex, pVBInfo )) )
+            {
+              return FALSE;
+            }
+        }
+#endif
+
+
+        if ( pVBInfo->IF_DEF_LVDS == 1 )
+        {
+            if ( !XGI_XG21CheckLVDSMode(ModeNo , ModeIdIndex, pVBInfo) )
+            {
+              return FALSE;
+            }
+        }
+
+        if ( ModeNo <= 0x13 )
+        {
+            pVBInfo->ModeType = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag & ModeInfoFlag;
+        }
+        else
+        {
+            pVBInfo->ModeType = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & ModeInfoFlag;
+        }
+
+    	pVBInfo->SetFlag = 0 ;
+        if ( pVBInfo->IF_DEF_CH7007 != 1 )
+        {
+    	    pVBInfo->VBInfo = DisableCRT2Display ;
+        }
+
+
+    	XGI_DisplayOff(HwDeviceExtension, pVBInfo) ;
+
+    	XGI_SetCRT1Group(HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    	XGI_DisplayOn( HwDeviceExtension, pVBInfo ) ;
+    	/*
+    	if( HwDeviceExtension->jChipType == XG21 )
+    	  XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0x80 , 0x80 ) ;
+    	*/
+    }
+
+
+/*
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+    pVBInfo->ModeType = modeflag&ModeInfoFlag ;
+    pVBInfo->SetFlag = 0x00 ;
+    pVBInfo->VBInfo = DisableCRT2Display ;
+    temp = XGINew_CheckMemorySize(  HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( temp == 0 )
+        return( 0 ) ;
+
+    XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+    XGI_SetCRT1Group( HwDeviceExtension , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+*/
+
+    XGI_UpdateModeInfo( HwDeviceExtension, pVBInfo ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )			/* kuku 2004/06/25 */
+{
+    XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
+}
+
+    return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Group */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT StandTableIndex ,
+           RefreshRateTableIndex ,
+           b3CC ,
+           temp ;
+
+    USHORT XGINew_P3cc =  pVBInfo->P3cc;
+
+    /* XGINew_CRT1Mode = ModeNo ; // SaveModeID */
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    /* XGI_SetBIOSData(ModeNo , ModeIdIndex ) ; */
+    /* XGI_ClearBankRegs( ModeNo , ModeIdIndex ) ; */
+    XGI_SetSeqRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+    XGI_SetMiscRegs( StandTableIndex,  pVBInfo ) ;
+    XGI_SetCRTCRegs( HwDeviceExtension , StandTableIndex,  pVBInfo) ;
+    XGI_SetATTRegs( ModeNo , StandTableIndex , ModeIdIndex, pVBInfo ) ;
+    XGI_SetGRCRegs(  StandTableIndex, pVBInfo ) ;
+    XGI_ClearExt1Regs(pVBInfo) ;
+
+/* if ( pVBInfo->IF_DEF_ExpLink ) */
+    if ( HwDeviceExtension->jChipType == XG27 )
+    {
+      if ( pVBInfo->IF_DEF_LVDS == 0 )
+      {
+        XGI_SetDefaultVCLK( pVBInfo ) ;
+      }
+    }
+
+    temp = ~ProgrammingCRT2 ;
+    pVBInfo->SetFlag &= temp ;
+    pVBInfo->SelectCRT2Rate = 0 ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToLCDA | SetInSlaveMode ) )
+        {
+            pVBInfo->SetFlag |= ProgrammingCRT2 ;
+         }
+    }
+
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( RefreshRateTableIndex != 0xFFFF )
+    {
+        XGI_SetSync( RefreshRateTableIndex, pVBInfo ) ;
+        XGI_SetCRT1CRTC( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo, HwDeviceExtension ) ;
+        XGI_SetCRT1DE( HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        XGI_SetCRT1Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+        XGI_SetCRT1VCLK( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    }
+
+    if ( ( HwDeviceExtension->jChipType >= XG20 )&&
+         ( HwDeviceExtension->jChipType < XG27 ) ) /* fix H/W DCLK/2 bug */
+    {
+    	if ( ( ModeNo == 0x00 ) | (ModeNo == 0x01) )
+    	{
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x4E) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE9) ;
+    	    b3CC =(UCHAR) XGINew_GetReg2(XGINew_P3cc) ;
+    	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
+    	}
+    	else if ( ( ModeNo == 0x04) | ( ModeNo == 0x05) | ( ModeNo == 0x0D) )
+    	{
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE3) ;
+    	    b3CC = (UCHAR)XGINew_GetReg2(XGINew_P3cc) ;
+    	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
+    	}
+    }
+
+    if ( HwDeviceExtension->jChipType >= XG21 )
+    {
+      temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+      if ( temp & 0xA0 )
+      {
+
+        /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x20 ) ;*/	/* Enable write GPIOF */
+        /*XGINew_SetRegAND( pVBInfo->P3d4 , 0x48 , ~0x20 ) ;*/ 	/* P. DWN */
+        /* XG21 CRT1 Timing */
+        if ( HwDeviceExtension->jChipType == XG27 )
+          XGI_SetXG27CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+        else
+        XGI_SetXG21CRTC( ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo );
+
+        XGI_UpdateXG21CRTC( ModeNo , pVBInfo , RefreshRateTableIndex) ;
+
+        if ( HwDeviceExtension->jChipType == XG27 )
+          XGI_SetXG27LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+        else
+          XGI_SetXG21LCD( pVBInfo , RefreshRateTableIndex , ModeNo );
+
+        if ( pVBInfo->IF_DEF_LVDS == 1 )
+        {
+          if ( HwDeviceExtension->jChipType == XG27 )
+            XGI_SetXG27LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+          else
+            XGI_SetXG21LVDSPara(ModeNo,ModeIdIndex, pVBInfo );
+        }
+        /*XGINew_SetRegOR( pVBInfo->P3d4 , 0x48 , 0x20 ) ;*/	/* P. ON */
+      }
+    }
+
+    pVBInfo->SetFlag &= ( ~ProgrammingCRT2 ) ;
+    XGI_SetCRT1FIFO(  ModeNo , HwDeviceExtension,  pVBInfo ) ;
+    XGI_SetCRT1ModeRegs(  HwDeviceExtension , ModeNo , ModeIdIndex , RefreshRateTableIndex , pVBInfo) ;
+
+
+    /* XGI_LoadCharacter(); //dif ifdef TVFont */
+
+    XGI_LoadDAC( ModeNo , ModeIdIndex, pVBInfo ) ;
+    /* XGI_ClearBuffer( HwDeviceExtension , ModeNo, pVBInfo ) ; */
+#ifdef WIN2000
+   if ( pVBInfo->IF_DEF_CH7007 == 1 )  /* [Billy]  2007/05/14  */
+   {
+       VideoDebugPrint((0, "XGI_SetCRT1Group: VBInfo->IF_DEF_CH7007==1\n"));
+       SetCH7007Regs(HwDeviceExtension, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo ) ; /* 07/05/28 */
+   }
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetModePtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR index ;
+
+    if ( ModeNo <= 0x13 )
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_StTableIndex ;
+    else
+    {
+        if ( pVBInfo->ModeType <= 0x02 )
+            index = 0x1B ;	/* 02 -> ModeEGA */
+        else
+            index = 0x0F ;
+    }
+    return( index ) ;		/* Get pVBInfo->StandTable index */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetBIOSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_SetBIOSData( USHORT ModeNo , USHORT ModeIdIndex )
+{
+    return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBankRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*UCHAR XGI_ClearBankRegs( USHORT ModeNo , USHORT ModeIdIndex )
+{
+    return( 0 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSeqRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSeqRegs(  USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempah ,
+          SRdata ;
+
+    USHORT i ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x00 , 0x03 ) ;		/* Set SR0 */
+    tempah=pVBInfo->StandTable[ StandTableIndex ].SR[ 0 ] ;
+
+    i = SetCRT2ToLCDA ;
+    if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+    {
+        tempah |= 0x01 ;
+    }
+    else
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+                tempah |= 0x01 ;
+        }
+    }
+
+    tempah |= 0x20 ;		/* screen off */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , tempah ) ;		/* Set SR1 */
+
+    for( i = 02 ; i <= 04 ; i++ )
+    {
+        SRdata = pVBInfo->StandTable[ StandTableIndex ].SR[ i - 1 ] ;	/* Get SR2,3,4 from file */
+        XGINew_SetReg1( pVBInfo->P3c4 , i , SRdata ) ;				/* Set SR2 3 4 */
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetMiscRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetMiscRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR Miscdata ;
+
+    Miscdata = pVBInfo->StandTable[ StandTableIndex ].MISC ;	/* Get Misc from file */
+/*
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            Miscdata |= 0x0C ;
+        }
+    }
+*/
+
+    XGINew_SetReg3( pVBInfo->P3c2 , Miscdata ) ;		/* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRTCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRTCRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR CRTCdata ;
+    USHORT i ;
+
+    CRTCdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    CRTCdata &= 0x7f ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , CRTCdata ) ;		/* Unlock CRTC */
+
+    for( i = 0 ; i <= 0x18 ; i++ )
+    {
+        CRTCdata = pVBInfo->StandTable[ StandTableIndex ].CRTC[ i ] ;	/* Get CRTC from file */
+        XGINew_SetReg1( pVBInfo->P3d4 , i , CRTCdata ) ;				/* Set CRTC( 3d4 ) */
+    }
+/*
+    if ( ( HwDeviceExtension->jChipType == XGI_630 )&& ( HwDeviceExtension->jChipRevision == 0x30 ) )
+    {
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+            {
+                XGINew_SetReg1( pVBInfo->P3d4 , 0x18 , 0xFE ) ;
+            }
+        }
+    }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetATTRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR ARdata ;
+    USHORT i ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    for( i = 0 ; i <= 0x13 ; i++ )
+    {
+        ARdata = pVBInfo->StandTable[ StandTableIndex ].ATTR[ i ] ;
+        if ( modeflag & Charx8Dot )	/* ifndef Dot9 */
+        {
+            if ( i == 0x13 )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                    ARdata = 0 ;
+                else
+                {
+                    if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD ) )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                            ARdata = 0 ;
+                    }
+                }
+            }
+        }
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;			/* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , i ) ;		/* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , ARdata ) ;	/* set data */
+    }
+
+    XGINew_GetReg2( pVBInfo->P3da ) ;			/* reset 3da */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x14 ) ;		/* set index */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;		/* set data */
+    XGINew_GetReg2( pVBInfo->P3da ) ;			/* Enable Attribute */
+    XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGRCRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR GRdata ;
+    USHORT i ;
+
+    for( i = 0 ; i <= 0x08 ; i++ )
+    {
+        GRdata = pVBInfo->StandTable[ StandTableIndex ].GRC[ i ] ;	/* Get GR from file */
+        XGINew_SetReg1( pVBInfo->P3ce , i , GRdata ) ;			/* Set GR(3ce) */
+    }
+
+    if ( pVBInfo->ModeType > ModeVGA )
+    {
+        GRdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3ce , 0x05 ) ;
+        GRdata &= 0xBF ;						/* 256 color disable */
+        XGINew_SetReg1( pVBInfo->P3ce , 0x05 , GRdata ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearExt1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ;
+
+    for( i = 0x0A ; i <= 0x0E ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , i , 0x00 ) ;	/* Clear SR0A-SR0E */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDefaultVCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x20 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 0 ].SR2B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 0 ].SR2C ) ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x10 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ 1 ].SR2B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ 1 ].SR2C ) ;
+
+    XGINew_SetRegAND( pVBInfo->P3c4 , 0x31 , ~0x30 ) ;
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRatePtrCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    SHORT  LCDRefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 } ,
+           LCDARefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 , 0x01 , 0x01 , 0x01 } ;
+
+    USHORT RefreshRateTableIndex , i ,
+         modeflag , index , temp ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    if ( pVBInfo->IF_DEF_CH7005 == 1 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( modeflag & HalfDCLK )
+                return( 0 ) ;
+        }
+    }
+
+    if ( ModeNo < 0x14 )
+        return( 0xFFFF ) ;
+
+    index = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+    index = index >> pVBInfo->SelectCRT2Rate ;
+    index &= 0x0F ;
+
+    if ( pVBInfo->LCDInfo & LCDNonExpanding )
+        index = 0 ;
+
+    if ( index > 0 )
+        index-- ;
+
+    if ( pVBInfo->SetFlag & ProgrammingCRT2 )
+    {
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                index = 0 ;
+            }
+        }
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            if( pVBInfo->IF_DEF_LVDS == 0 )
+            {
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    temp = LCDARefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ;     /* 301b */
+                else
+                    temp = LCDRefreshIndex[ pVBInfo->LCDResInfo & 0x0F ] ;
+
+                if ( index > temp )
+                {
+                    index = temp ;
+                }
+            }
+            else
+            {
+                index = 0 ;
+            }
+        }
+    }
+
+    RefreshRateTableIndex = pVBInfo->EModeIDTable[ ModeIdIndex ].REFindex ;
+    ModeNo = pVBInfo->RefIndex[ RefreshRateTableIndex ].ModeID ;
+    if ( pXGIHWDE->jChipType >= XG20 )  /* for XG20, XG21, XG27 */
+    {
+      /*
+      if ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag & XG2xNotSupport )
+      {
+        index++;
+      }
+      */
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 800 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 600 ) )
+      {
+        index++;
+      }
+/* Alan 10/19/2007; do the similiar adjustment like XGISearchCRT1Rate() */
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1024 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 768 ) )
+      {
+        index++;
+      }
+      if ( ( pVBInfo->RefIndex[ RefreshRateTableIndex ].XRes == 1280 ) &&
+           ( pVBInfo->RefIndex[ RefreshRateTableIndex ].YRes == 1024 ) )
+      {
+        index++;
+      }
+    }
+
+    i = 0 ;
+    do
+    {
+        if ( pVBInfo->RefIndex[ RefreshRateTableIndex + i ].ModeID != ModeNo )
+            break ;
+        temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i ].Ext_InfoFlag ;
+        temp &= ModeInfoFlag ;
+        if ( temp < pVBInfo->ModeType )
+            break ;
+        i++ ;
+        index-- ;
+
+    } while( index != 0xFFFF ) ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+    {
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            temp = pVBInfo->RefIndex[ RefreshRateTableIndex + i - 1 ].Ext_InfoFlag ;
+            if ( temp & InterlaceMode )
+            {
+                i++ ;
+            }
+        }
+    }
+    i-- ;
+    if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+    {
+        temp = XGI_AjustCRT2Rate( ModeNo , ModeIdIndex , RefreshRateTableIndex , &i, pVBInfo) ;
+    }
+    return( RefreshRateTableIndex + i ) ;                /*return(0x01|(temp1<<1));   */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AjustCRT2Rate */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_AjustCRT2Rate( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , USHORT *i, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax ,
+           tempbx ,
+           resinfo ,
+           modeflag ,
+           infoflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ModeFlag */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    tempbx = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID ;
+    tempax = 0 ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        {
+            tempax |= SupportRAMDAC2 ;
+
+            if ( pVBInfo->VBType & VB_XGI301C )
+                tempax |= SupportCRT2in301C ;
+        }
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )	/* 301b */
+        {
+            tempax |= SupportLCD ;
+
+            if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+            {
+                if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                {
+                    if ( pVBInfo->LCDInfo & LCDNonExpanding )
+                    {
+                        if ( resinfo >= 9 )
+                        {
+                            tempax = 0 ;
+                            return( 0 ) ;
+                        }
+                    }
+                }
+            }
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )	/* for HiTV */
+        {
+            if ( ( pVBInfo->VBType & VB_XGI301LV ) && ( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+            {
+                tempax |= SupportYPbPr ;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( resinfo == 4 )
+                        return( 0 ) ;
+
+                    if ( resinfo == 3 )
+                        return( 0 ) ;
+
+                    if ( resinfo > 7 )
+                        return( 0 ) ;
+                }
+            }
+            else
+            {
+                tempax |= SupportHiVisionTV ;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( resinfo == 4 )
+                        return( 0 ) ;
+
+                    if ( resinfo == 3 )
+                    {
+                        if ( pVBInfo->SetFlag & TVSimuMode )
+                            return( 0 ) ;
+                    }
+
+                    if ( resinfo > 7 )
+                        return( 0 ) ;
+                }
+            }
+        }
+        else
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr | SetCRT2ToHiVisionTV ) )
+            {
+                tempax |= SupportTV ;
+
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                {
+                    tempax |= SupportTV1024 ;
+                }
+
+                if ( !( pVBInfo->VBInfo & SetPALTV ) )
+                {
+                    if ( modeflag & NoSupportSimuTV )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                        {
+                            if ( !( pVBInfo->VBInfo & SetNotSimuMode ) )
+                            {
+                               return( 0 ) ;
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+    else		/* for LVDS */
+    {
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                tempax |= SupportCHTV ;
+            }
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            tempax |= SupportLCD ;
+
+            if ( resinfo > 0x08 )
+                return( 0 ) ;		/* 1024x768 */
+
+            if ( pVBInfo->LCDResInfo < Panel1024x768 )
+            {
+                if ( resinfo > 0x07 )
+                    return( 0 ) ;	/* 800x600 */
+
+                if ( resinfo == 0x04 )
+                    return( 0 ) ;	/* 512x384 */
+            }
+        }
+    }
+
+    for( ; pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID == tempbx ; ( *i )-- )
+    {
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+        if ( infoflag & tempax )
+        {
+            return( 1 ) ;
+        }
+        if ( ( *i ) == 0 )
+            break ;
+    }
+
+    for( ( *i ) = 0 ; ; ( *i )++ )
+    {
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].Ext_InfoFlag ;
+        if ( pVBInfo->RefIndex[ RefreshRateTableIndex + ( *i ) ].ModeID != tempbx )
+        {
+            return( 0 ) ;
+        }
+
+        if ( infoflag & tempax )
+        {
+            return( 1 ) ;
+        }
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetSync(USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT sync ,
+           temp ;
+
+    sync = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag >> 8 ;	/* di+0x00 */
+    sync &= 0xC0 ;
+    temp = 0x2F ;
+    temp |= sync ;
+    XGINew_SetReg3( pVBInfo->P3c2 , temp ) ;				/* Set Misc(3c2) */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1CRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1CRTC( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR  index ,
+           data ;
+
+    USHORT i ;
+
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;	/* Get index */
+    index = index&IndexMask ;
+
+    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1(pVBInfo->P3d4,0x11,data);				/* Unlock CRTC */
+
+    for( i = 0 ; i < 8 ; i++ )
+        pVBInfo->TimingH[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i ] ;
+
+    for( i = 0 ; i < 7 ; i++ )
+        pVBInfo->TimingV[ 0 ].data[ i ] = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ i + 8 ] ;
+
+    XGI_SetCRT1Timing_H( pVBInfo, HwDeviceExtension ) ;
+
+
+
+    XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo, pVBInfo ) ;
+
+
+    if( pVBInfo->ModeType > 0x03 )
+        XGINew_SetReg1( pVBInfo->P3d4 , 0x14 , 0x4F ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_H */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+{
+    UCHAR data , data1, pushax;
+    USHORT i , j ;
+
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+    /* XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x11 , 0x7f , 0x00 ) ; */
+
+    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;		/* unlock cr0-7 */
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;
+
+    data = pVBInfo->TimingH[ 0 ].data[ 0 ] ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0 , data ) ;
+
+    for( i = 0x01 ; i <= 0x04 ; i++ )
+    {
+        data = pVBInfo->TimingH[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 1 ) , data ) ;
+    }
+
+    for( i = 0x05 ; i <= 0x06 ; i++ )
+    {
+        data = pVBInfo->TimingH[ 0 ].data[ i ];
+        XGINew_SetReg1( pVBInfo->P3c4 ,( USHORT )( i + 6 ) , data ) ;
+    }
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+    j &= 0x1F ;
+    data = pVBInfo->TimingH[ 0 ].data[ 7 ] ;
+    data &= 0xE0 ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0e , data ) ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x04 ) ;
+    	data = data - 1 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x04 , data ) ;
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x05 ) ;
+    	data1 = data ;
+    	data1 &= 0xE0 ;
+    	data &= 0x1F ;
+    	if ( data == 0 )
+    	{
+    	    pushax = data ;
+    	    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0c ) ;
+    	    data &= 0xFB ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x0c , data ) ;
+    	    data = pushax ;
+    	}
+    	data = data - 1 ;
+    	data |= data1 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x05 , data ) ;
+    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+    	data = data >> 5 ;
+    	data = data + 3 ;
+    	if ( data > 7 )
+    	    data = data - 7 ;
+    	data = data << 5 ;
+    	XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0e , ~0xE0 , data ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Timing_V */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR data ;
+    USHORT i , j ;
+
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
+    /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
+    /* XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , 0x7f , 0x00 ) ; */
+
+    for( i = 0x00 ; i <= 0x01 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 6 ) , data ) ;
+    }
+
+    for( i = 0x02 ; i <= 0x03 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x0e ) , data ) ;
+    }
+
+    for( i = 0x04 ; i <= 0x05 ; i++ )
+    {
+        data = pVBInfo->TimingV[ 0 ].data[ i ] ;
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x11 ) , data ) ;
+    }
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0a ) ;
+    j &= 0xC0 ;
+    data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+    data &= 0x3F ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0a , data ) ;
+
+    data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
+    data &= 0x80 ;
+    data = data >> 2 ;
+
+    if ( ModeNo <= 0x13 )
+        i = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        i = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    i &= DoubleScanMode ;
+    if ( i )
+        data |= 0x80 ;
+
+    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x09 ) ;
+    j &= 0x5F ;
+    data |= j ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x09 , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21CRTC */
+/* Input : Stand or enhance CRTC table */
+/* Output : Fill CRT Hsync/Vsync to SR2E/SR2F/SR30/SR33/SR34/SR3F */
+/* Description : Set LCD timing */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+  UCHAR StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+  USHORT Temp1, Temp2, Temp3 ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ;		/* CR04 HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;    		/* SR2E [7:0]->HRS */
+    Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ;		/* Tempbx: CR05 HRE */
+    Tempbx &= 0x1F ;							/* Tempbx: HRE[4:0] */
+    Tempcx = Tempax ;
+    Tempcx &=  0xE0 ;							/* Tempcx: HRS[7:5] */
+    Tempdx = Tempcx | Tempbx ;						/* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+    if ( Tempbx < ( Tempax & 0x1F ) )					/* IF HRE < HRS */
+      Tempdx |= 0x20 ;							/* Tempdx: HRE = HRE + 0x20 */
+    Tempdx <<= 2 ;							/* Tempdx << 2 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ;    		/* SR2F [7:2]->HRE */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ;	/* Tempax: CR16 VRS */
+    Tempbx = Tempax ;							/* Tempbx=Tempax */
+    Tempax &= 0x01 ;							/* Tempax: VRS[0] */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ;   		/* SR33[0]->VRS */
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;		/* Tempax: CR7 VRS */
+    Tempdx = Tempbx >> 1 ;						/* Tempdx: VRS[7:1] */
+    Tempcx = Tempax & 0x04 ;						/* Tempcx: CR7[2] */
+    Tempcx <<= 5 ;							/* Tempcx[7]: VRS[8] */
+    Tempdx |= Tempcx ;							/* Tempdx: VRS[8:1] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempdx ) ;    		/* SR34[7:0]: VRS[8:1] */
+
+    Temp1 = Tempcx << 1 ;						/* Temp1[8]: VRS[8] UCHAR -> USHORT */
+    Temp1 |= Tempbx ;							/* Temp1[8:0]: VRS[8:0] */
+    Tempax &= 0x80 ;							/* Tempax[7]: CR7[7] */
+    Temp2 = Tempax << 2 ;						/* Temp2[9]: VRS[9] */
+    Temp1 |= Temp2 ;							/* Temp1[9:0]: VRS[9:0] */
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ;	/* CR16 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Temp2 = Temp1 & 0x3F0 ;						/* Temp2[9:4]: VRS[9:4] */
+    Temp2 |= Tempax ;							/* Temp2[9:0]: VRE[9:0] */
+    Temp3 = Temp1 & 0x0F ;						/* Temp3[3:0]: VRS[3:0] */
+    if ( Tempax < Temp3 )						/* VRE[3:0]<VRS[3:0] */
+      Temp2 |= 0x10 ;							/* Temp2: VRE + 0x10 */
+    Temp2 &= 0xFF ;							/* Temp2[7:0]: VRE[7:0] */
+    Tempax = (UCHAR)Temp2 ;						/* Tempax[7:0]: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
+    Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
+    Temp1 >>= 9 ;							/* [10:9]->[1:0] */
+    Tempbx = (UCHAR)Temp1 ;						/* Tempbx[1:0]: VRS[10:9] */
+    Tempax |= Tempbx ;							/* VRE[5:0]VRS[10:9] */
+    Tempax &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
+  }
+  else
+  {
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempcx = Tempax ;							/* Tempcx: HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;  		        /* SR2E[7:0]->HRS */
+
+    Tempdx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SRB */
+    Tempdx &= 0xC0 ;							/* Tempdx[7:6]: SRB[7:6] */
+    Temp1 = Tempdx ;							/* Temp1[7:6]: HRS[9:8] */
+    Temp1 <<= 2 ;							/* Temp1[9:8]: HRS[9:8] */
+    Temp1 |= Tempax ;							/* Temp1[9:0]: HRS[9:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ;		/* CR5 HRE */
+    Tempax &= 0x1F ;							/* Tempax[4:0]: HRE[4:0] */
+
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ;		/* SRC */
+    Tempbx &= 0x04 ;							/* Tempbx[2]: HRE[5] */
+    Tempbx <<= 3 ;							/* Tempbx[5]: HRE[5] */
+    Tempax |= Tempbx ;							/* Tempax[5:0]: HRE[5:0] */
+
+    Temp2 = Temp1 & 0x3C0 ;						/* Temp2[9:6]: HRS[9:6] */
+    Temp2 |= Tempax ;							/* Temp2[9:0]: HRE[9:0] */
+
+    Tempcx &= 0x3F ;							/* Tempcx[5:0]: HRS[5:0] */
+    if( Tempax < Tempcx )						/* HRE < HRS */
+      Temp2 |= 0x40 ;                                                   /* Temp2 + 0x40 */
+
+    Temp2 &= 0xFF ;
+    Tempax = (UCHAR)Temp2 ;						/* Tempax: HRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax[7:2]: HRE[5:0] */
+    Tempdx >>= 6 ;							/* Tempdx[7:6]->[1:0] HRS[9:8] */
+    Tempax |= Tempdx ;							/* HRE[5:0]HRS[9:8] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ;    		/* SR2F D[7:2]->HRE, D[1:0]->HRS */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ;		/* CR10 VRS */
+    Tempbx = Tempax ;							/* Tempbx: VRS */
+    Tempax &= 0x01 ;							/* Tempax[0]: VRS[0] */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x33 , Tempax ) ;   		/* SR33[0]->VRS[0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ;		/* CR7[2][7] VRE */
+    Tempcx = Tempbx >> 1 ;				   		/* Tempcx[6:0]: VRS[7:1] */
+    Tempdx = Tempax & 0x04 ;						/* Tempdx[2]: CR7[2] */
+    Tempdx <<= 5 ;							/* Tempdx[7]: VRS[8] */
+    Tempcx |= Tempdx ;							/* Tempcx[7:0]: VRS[8:1] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempcx ) ;   		/* SR34[8:1]->VRS */
+
+    Temp1 = Tempdx ;							/* Temp1[7]: Tempdx[7] */
+    Temp1 <<= 1 ;							/* Temp1[8]: VRS[8] */
+    Temp1 |= Tempbx ;							/* Temp1[8:0]: VRS[8:0] */
+    Tempax &= 0x80 ;
+    Temp2 = Tempax << 2 ;						/* Temp2[9]: VRS[9] */
+    Temp1 |= Temp2 ;							/* Temp1[9:0]: VRS[9:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempax: SRA */
+    Tempax &= 0x08 ;							/* Tempax[3]: VRS[3] */
+    Temp2 = Tempax ;
+    Temp2 <<= 7 ;							/* Temp2[10]: VRS[10] */
+    Temp1 |= Temp2 ;							/* Temp1[10:0]: VRS[10:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ;		/* Tempax: CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempbx: SRA */
+    Tempbx &= 0x20 ;							/* Tempbx[5]: VRE[5] */
+    Tempbx >>= 1 ;							/* Tempbx[4]: VRE[4] */
+    Tempax |= Tempbx ;							/* Tempax[4:0]: VRE[4:0] */
+    Temp2 = Temp1 & 0x7E0 ;						/* Temp2[10:5]: VRS[10:5] */
+    Temp2 |= Tempax ;							/* Temp2[10:5]: VRE[10:5] */
+
+    Temp3 = Temp1 & 0x1F ;						/* Temp3[4:0]: VRS[4:0] */
+    if ( Tempax < Temp3 )						/* VRE < VRS */
+      Temp2 |= 0x20 ;							/* VRE + 0x20 */
+
+    Temp2 &= 0xFF ;
+    Tempax = (UCHAR)Temp2 ;						/* Tempax: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax[7:0]; VRE[5:0]00 */
+    Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
+    Temp1 >>= 9 ;  							/* Temp1[1:0]: VRS[10:9] */
+    Tempbx = (UCHAR)Temp1 ;
+    Tempax |= Tempbx ;							/* Tempax[7:0]: VRE[5:0]VRS[10:9] */
+    Tempax &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
+  }
+}
+
+void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+  USHORT StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 4 ] ;		/* CR04 HRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;    		/* SR2E [7:0]->HRS */
+    Tempbx = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 5 ] ;		/* Tempbx: CR05 HRE */
+    Tempbx &= 0x1F ;							/* Tempbx: HRE[4:0] */
+    Tempcx = Tempax ;
+    Tempcx &=  0xE0 ;							/* Tempcx: HRS[7:5] */
+    Tempdx = Tempcx | Tempbx ;						/* Tempdx(HRE): HRS[7:5]HRE[4:0] */
+    if ( Tempbx < ( Tempax & 0x1F ) )					/* IF HRE < HRS */
+      Tempdx |= 0x20 ;							/* Tempdx: HRE = HRE + 0x20 */
+    Tempdx <<= 2 ;							/* Tempdx << 2 */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempdx ) ;    		/* SR2F [7:2]->HRE */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 16 ] ;	/* Tempax: CR10 VRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ;   		/* SR34[7:0]->VRS */
+    Tempcx = Tempax ;							/* Tempcx=Tempax=VRS[7:0] */
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;		/* Tempax[7][2]: CR7[7][2] VRS[9][8] */
+    Tempbx = Tempax ;							/* Tempbx=CR07 */
+    Tempax &= 0x04 ;     						/* Tempax[2]: CR07[2] VRS[8] */
+    Tempax >>= 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01, Tempax ) ;        /* SR35 D[0]->VRS D[8] */
+    Tempcx |= (Tempax << 8) ;					        /* Tempcx[8] |= VRS[8] */
+    Tempcx |= (Tempbx & 0x80)<<2;					/* Tempcx[9] |= VRS[9] */
+
+
+    Tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 17 ] ;	/* CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax: VRE[3:0] */
+    Tempbx = Tempcx ;							/* Tempbx=Tempcx=VRS[9:0] */
+    Tempbx &= 0x3F0 ;    						/* Tempbx[9:4]: VRS[9:4] */
+    Tempbx |= Tempax ;							/* Tempbx[9:0]: VRE[9:0] */
+    if ( Tempax <= (Tempcx & 0x0F) )					/* VRE[3:0]<=VRS[3:0] */
+      Tempbx |= 0x10 ;							/* Tempbx: VRE + 0x10 */
+    Tempax = (UCHAR)Tempbx & 0xFF;					/* Tempax[7:0]: VRE[7:0] */
+    Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
+    Tempcx = (Tempcx&0x600)>>8;                                         /* Tempcx VRS[10:9] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC, Tempax ) ;        /* SR3F D[7:2]->VRE D[5:0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x06, Tempcx ) ;	/* SR35 D[2:1]->VRS[10:9] */
+  }
+  else
+  {
+    index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempbx = Tempax ;							/* Tempbx: HRS[7:0] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , Tempax ) ;  		        /* SR2E[7:0]->HRS */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SR0B */
+    Tempax &= 0xC0 ;							/* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+    Tempbx |= (Tempax << 2);					/* Tempbx: HRS[9:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 4 ] ;		/* CR5 HRE */
+    Tempax &= 0x1F ;							/* Tempax[4:0]: HRE[4:0] */
+    Tempcx = Tempax ;							/* Tempcx: HRE[4:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 6 ] ;		/* SRC */
+    Tempax &= 0x04 ;							/* Tempax[2]: HRE[5] */
+    Tempax <<= 3 ;							    /* Tempax[5]: HRE[5] */
+    Tempcx |= Tempax ;							/* Tempcx[5:0]: HRE[5:0] */
+
+    Tempbx = Tempbx & 0x3C0 ;					/* Tempbx[9:6]: HRS[9:6] */
+    Tempbx |= Tempcx ;							/* Tempbx: HRS[9:6]HRE[5:0] */
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 3 ] ;		/* Tempax: CR4 HRS */
+    Tempax &= 0x3F ;							/* Tempax: HRS[5:0] */
+    if( Tempcx <= Tempax )						/* HRE[5:0] < HRS[5:0] */
+      Tempbx += 0x40 ;                          /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 5 ] ;		/* SR0B */
+    Tempax &= 0xC0 ;							/* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+    Tempax >>= 6;                               /* Tempax[1:0]: HRS[9:8]*/
+    Tempax |= ((Tempbx << 2) & 0xFF);           /* Tempax[7:2]: HRE[5:0] */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , Tempax ) ;    		/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , 0xE3 , 00 ) ;
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 10 ] ;		/* CR10 VRS */
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempax ) ;   		/* SR34[7:0]->VRS[7:0] */
+
+    Tempcx = Tempax ;							/* Tempcx <= VRS[7:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 9 ] ;		/* CR7[7][2] VRS[9][8] */
+    Tempbx = Tempax ;							/* Tempbx <= CR07[7:0] */
+    Tempax = Tempax & 0x04 ;					/* Tempax[2]: CR7[2]: VRS[8] */
+    Tempax >>= 2 ;							    /* Tempax[0]: VRS[8] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x01 , Tempax ) ;   	/* SR35[0]: VRS[8] */
+    Tempcx |= (Tempax<<8) ;						/* Tempcx <= VRS[8:0] */
+    Tempcx |= ((Tempbx&0x80)<<2) ;				/* Tempcx <= VRS[9:0] */
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempax: SR0A */
+    Tempax &= 0x08;                             /* SR0A[3] VRS[10] */
+    Tempcx |= (Tempax<<7) ;        				/* Tempcx <= VRS[10:0] */
+
+
+    Tempax = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 11 ] ;		/* Tempax: CR11 VRE */
+    Tempax &= 0x0F ;							/* Tempax[3:0]: VRE[3:0] */
+    Tempbx = pVBInfo->XGINEWUB_CRT1Table[ index ].CR[ 14 ] ;		/* Tempbx: SR0A */
+    Tempbx &= 0x20 ;							/* Tempbx[5]: SR0A[5]: VRE[4] */
+    Tempbx >>= 1 ;							    /* Tempbx[4]: VRE[4] */
+    Tempax |= Tempbx ;							/* Tempax[4:0]: VRE[4:0] */
+    Tempbx = Tempcx ;							/* Tempbx: VRS[10:0] */
+    Tempbx &= 0x7E0 ;						    /* Tempbx[10:5]: VRS[10:5] */
+    Tempbx |= Tempax ;							/* Tempbx: VRS[10:5]VRE[4:0] */
+
+    if ( Tempbx <= Tempcx )						/* VRE <= VRS */
+      Tempbx |= 0x20 ;							/* VRE + 0x20 */
+
+    Tempax = (Tempbx<<2) & 0xFF ;					/* Tempax: Tempax[7:0]; VRE[5:0]00 */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , Tempax ) ;	/* SR3F[7:2]:VRE[5:0] */
+    Tempax = Tempcx >> 8;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , Tempax ) ;	/* SR35[2:0]:VRS[10:8] */
+  }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetXG21LCD */
+/* Input : */
+/* Output : FCLK duty cycle, FCLK delay compensation */
+/* Description : All values set zero */
+/* --------------------------------------------------------------------- */
+void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+  USHORT Data , Temp , b3CC ;
+  USHORT XGI_P3cc ;
+
+  XGI_P3cc = pVBInfo->P3cc ;
+
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+  if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+  }
+
+  Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+  if ( Temp & 0x01 )
+  {
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x06 , 0x40 ) ; /* 18 bits FP */
+    XGINew_SetRegOR( pVBInfo->P3c4 , 0x09 , 0x40 ) ;
+  }
+
+  XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ;   /* Negative blank polarity */
+
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ;
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ;
+
+  if ( ModeNo <= 0x13 )
+  {
+    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    if ( b3CC & 0x40 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( b3CC & 0x80 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+  else
+  {
+    Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    if ( Data & 0x4000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( Data & 0x8000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+}
+
+void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+{
+  USHORT Data , Temp , b3CC ;
+  USHORT XGI_P3cc ;
+
+  XGI_P3cc = pVBInfo->P3cc ;
+
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x00 ) ;
+  XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x00 ) ;
+
+  Temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+  if ( ( Temp & 0x03 ) == 0 )  /* dual 12 */
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , 0x13 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , 0x13 ) ;
+  }
+
+  if ( ((*pVBInfo->pDVOSetting)&0xC0) == 0xC0 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2E , *pVBInfo->pCR2E ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2F , *pVBInfo->pCR2F ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x46 , *pVBInfo->pCR46 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x47 , *pVBInfo->pCR47 ) ;
+  }
+
+  XGI_SetXG27FPBits(pVBInfo);
+
+  XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x01 ) ;   /* Negative blank polarity */
+
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x30 , ~0x20 ) ; /* Hsync polarity */
+  XGINew_SetRegAND( pVBInfo->P3c4 , 0x35 , ~0x80 ) ; /* Vsync polarity */
+
+  if ( ModeNo <= 0x13 )
+  {
+    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    if ( b3CC & 0x40 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( b3CC & 0x80 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+  else
+  {
+    Data = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    if ( Data & 0x4000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
+    if ( Data & 0x8000 )
+      XGINew_SetRegOR( pVBInfo->P3c4 , 0x35 , 0x80 ) ; /* Vsync polarity */
+  }
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateXG21CRTC */
+/* Input : */
+/* Output : CRT1 CRTC */
+/* Description : Modify CRT1 Hsync/Vsync to fix LCD mode timing */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateXG21CRTC( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo , USHORT RefreshRateTableIndex )
+{
+  int i , index = -1;
+
+  XGINew_SetRegAND( pVBInfo->P3d4 , 0x11 , 0x7F ) ;		/* Unlock CR0~7 */
+  if ( ModeNo <= 0x13 )
+  {
+    for( i = 0 ; i < 12 ; i++ )
+    {
+      if ( ModeNo == pVBInfo->UpdateCRT1[ i ].ModeID )
+        index = i ;
+    }
+  }
+  else
+  {
+    if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ==  RES640x480x60 ) )
+      index = 12 ;
+    else if ( ModeNo == 0x2E && ( pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC == RES640x480x72 ) )
+      index = 13 ;
+    else if ( ModeNo == 0x2F )
+      index = 14 ;
+    else if ( ModeNo == 0x50 )
+      index = 15 ;
+    else if ( ModeNo == 0x59 )
+      index = 16 ;
+  }
+
+  if( index != -1 )
+  {
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x02 , pVBInfo->UpdateCRT1[ index ].CR02 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x03 , pVBInfo->UpdateCRT1[ index ].CR03 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , pVBInfo->UpdateCRT1[ index ].CR15 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , pVBInfo->UpdateCRT1[ index ].CR16 ) ;
+  }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1DE */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT resindex ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           modeflag ;
+
+    UCHAR data ;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempax = pVBInfo->StResInfo[ resindex ].HTotal ;
+        tempbx = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempax = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+        tempbx = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+    }
+
+    if ( modeflag & HalfDCLK )
+        tempax = tempax >> 1 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & HalfDCLK )
+            tempax = tempax << 1 ;
+
+        temp = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+        if ( temp & InterlaceMode )
+            tempbx = tempbx >> 1 ;
+
+        if ( modeflag & DoubleScanMode )
+            tempbx = tempbx << 1 ;
+    }
+
+    tempcx = 8 ;
+
+    /* if ( !( modeflag & Charx8Dot ) ) */
+    /* tempcx = 9 ; */
+
+    tempax /= tempcx ;
+    tempax -= 1 ;
+    tempbx -= 1 ;
+    tempcx = tempax ;
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;		/* Unlock CRTC */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x01 , ( USHORT )( tempcx & 0xff ) ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x0b , ~0x0c , ( USHORT )( ( tempcx & 0x0ff00 ) >> 10 ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x12 , ( USHORT )( tempbx & 0xff ) ) ;
+    tempax = 0 ;
+    tempbx = tempbx >> 8 ;
+
+    if ( tempbx & 0x01 )
+        tempax |= 0x02 ;
+
+    if ( tempbx & 0x02 )
+        tempax |= 0x40 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x42 , tempax ) ;
+    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x07 ) ;
+    data &= 0xFF ;
+    tempax = 0 ;
+
+    if ( tempbx & 0x04 )
+        tempax |= 0x02 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x0a , ~0x02 , tempax ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT 	XGI_GetResInfo(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT resindex ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ; 	/* si+St_ResInfo */
+    }
+    else
+    {
+        resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+    return( resindex ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1Offset(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp ,
+           ah ,
+           al ,
+           temp2 ,
+           i ,
+           DisplayUnit ;
+
+    /* GetOffset */
+    temp = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+    temp = temp >> 8 ;
+    temp = pVBInfo->ScreenOffset[ temp ] ;
+
+    temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    temp2 &= InterlaceMode ;
+
+    if ( temp2 )
+        temp = temp << 1;
+
+    temp2 = pVBInfo->ModeType - ModeEGA ;
+
+    switch( temp2 )
+    {
+        case 0:
+            temp2 = 1 ;
+            break ;
+        case 1:
+            temp2 = 2 ;
+            break ;
+        case 2:
+            temp2 = 4 ;
+            break ;
+        case 3:
+            temp2 = 4 ;
+            break ;
+        case 4:
+            temp2 = 6 ;
+            break;
+        case 5:
+            temp2 = 8 ;
+            break ;
+        default:
+            break ;
+    }
+
+    if ( ( ModeNo >= 0x26 ) && ( ModeNo <= 0x28 ) )
+        temp = temp * temp2 + temp2 / 2 ;
+    else
+        temp *= temp2 ;
+
+    /* SetOffset */
+    DisplayUnit = temp ;
+    temp2 = temp ;
+    temp = temp >> 8 ;		/* ah */
+    temp &= 0x0F ;
+    i = XGINew_GetReg1( pVBInfo->P3c4 , 0x0E ) ;
+    i &= 0xF0 ;
+    i |= temp ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , i ) ;
+
+    temp =( UCHAR )temp2 ;
+    temp &= 0xFF ;		/* al */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x13 , temp ) ;
+
+    /* SetDisplayUnit */
+    temp2 = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    temp2 &= InterlaceMode ;
+    if ( temp2 )
+        DisplayUnit >>= 1 ;
+
+    DisplayUnit = DisplayUnit << 5 ;
+    ah = ( DisplayUnit & 0xff00 ) >> 8 ;
+    al = DisplayUnit & 0x00ff ;
+    if ( al == 0 )
+        ah += 1 ;
+    else
+        ah += 2 ;
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        if ( ( ModeNo == 0x4A ) | (ModeNo == 0x49 ) )
+            ah -= 1 ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x10 , ah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1VCLK( USHORT ModeNo , USHORT ModeIdIndex ,
+                        PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR index , data ;
+    USHORT vclkindex ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+    else if ( ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) && ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+    {
+        vclkindex = XGI_GetVCLK2Ptr( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        data = pVBInfo->VBVCLKData[ vclkindex ].Part4_A ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+        data = pVBInfo->VBVCLKData[ vclkindex ].Part4_B ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+    else
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) & 0xCF ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , data ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->VCLKData[ index ].SR2B ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->VCLKData[ index ].SR2C ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2D , 0x01 ) ;
+    }
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+    	if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag & HalfDCLK )
+    	{
+    	data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2B ) ;
+    	XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , data ) ;
+    	data = XGINew_GetReg1( pVBInfo->P3c4 , 0x2C ) ;
+    	index = data ;
+    	index &= 0xE0 ;
+    	data &= 0x1F ;
+    	data = data << 1 ;
+    	data += 1 ;
+    	data |= index ;
+    	XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , data ) ;
+    	}
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1FIFO( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+    data &= 0xfe ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ;	/* diable auto-threshold */
+
+    if ( ModeNo > 0x13 )
+    {
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x34 ) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+        data &= 0xC0 ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x30) ;
+        data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
+        data |= 0x01 ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x3D , data ) ;
+    }
+    else
+    {
+        if (HwDeviceExtension->jChipType == XG27)
+        {
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0x0E ) ;
+          data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+          data &= 0xC0 ;
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data | 0x20 ) ;
+        }
+        else
+        {
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x08 , 0xAE ) ;
+          data = XGINew_GetReg1( pVBInfo->P3c4 , 0x09 ) ;
+          data &= 0xF0 ;
+          XGINew_SetReg1( pVBInfo->P3c4 , 0x09 , data ) ;
+        }
+    }
+
+    if (HwDeviceExtension->jChipType == XG21)
+    {
+        XGI_SetXG21FPBits(pVBInfo);                 /* Fix SR9[7:6] can't read back */
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT1ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT1ModeRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
+                            USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ,
+           data2 ,
+           data3 ,
+           infoflag = 0 ,
+           modeflag ,
+           resindex ,
+           xres ;
+
+    if ( ModeNo > 0x13 )
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+    }
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;    /* si+St_ModeFlag */
+
+    if ( XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) & 0x01 )
+      XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1F , 0x3F , 0x00 ) ;
+
+    if ( ModeNo > 0x13 )
+        data = infoflag ;
+    else
+        data = 0 ;
+
+    data2 = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( pVBInfo->ModeType > 0x02 )
+        {
+            data2 |= 0x02 ;
+            data3 = pVBInfo->ModeType - ModeVGA ;
+            data3 = data3 << 2 ;
+            data2 |= data3 ;
+        }
+    }
+
+    data &= InterlaceMode ;
+
+    if ( data )
+        data2 |= 0x20 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x3F , data2 ) ;
+    /* XGINew_SetReg1(pVBInfo->P3c4,0x06,data2); */
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+    else
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;                         /* xres->ax */
+
+    data = 0x0000 ;
+    if ( infoflag & InterlaceMode )
+    {
+        if ( xres == 1024 )
+            data = 0x0035 ;
+        else if ( xres == 1280 )
+            data = 0x0048 ;
+    }
+
+    data2 = data & 0x00FF ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFF , data2 ) ;
+    data2 = ( data & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x19 , 0xFC , data2 ) ;
+
+    if( modeflag & HalfDCLK )
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xF7 , 0x08 ) ;
+
+    data2 = 0 ;
+
+    if ( modeflag & LineCompareOff )
+        data2 |= 0x08 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( pVBInfo->ModeType == ModeEGA )
+            data2 |= 0x40 ;
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0F , ~0x48 , data2 ) ;
+    data = 0x60 ;
+    if ( pVBInfo->ModeType != ModeText )
+    {
+        data = data ^ 0x60 ;
+        if ( pVBInfo->ModeType != ModeEGA )
+        {
+            data = data ^ 0xA0 ;
+        }
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x21 , 0x1F , data ) ;
+
+    XGI_SetVCLKState( HwDeviceExtension , ModeNo , RefreshRateTableIndex, pVBInfo) ;
+
+    /* if(modeflag&HalfDCLK)//030305 fix lowresolution bug */
+    /* if(XGINew_IF_DEF_NEW_LOWRES) */
+    /* XGI_VesaLowResolution(ModeNo,ModeIdIndex);//030305 fix lowresolution bug */
+
+    data=XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+
+    if (HwDeviceExtension->jChipType == XG27 )
+    {
+    	if ( data & 0x40 )
+    	    data = 0x2c ;
+    	else
+    	    data = 0x6c ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    	XGINew_SetRegOR( pVBInfo->P3d4 , 0x51 , 0x10 ) ;
+    }
+    else
+    if (HwDeviceExtension->jChipType >= XG20 )
+    {
+    	if ( data & 0x40 )
+    	    data = 0x33 ;
+    	else
+    	    data = 0x73 ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    	XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0x02 ) ;
+    }
+    else
+    {
+    if ( data & 0x40 )
+        data = 0x2c ;
+    else
+        data = 0x6c ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x52 , data ) ;
+    }
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetVCLKState */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetVCLKState(  PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data ,
+           data2 = 0 ;
+    SHORT  VCLK ;
+
+    UCHAR  index ;
+
+    if ( ModeNo <= 0x13 )
+        VCLK = 0 ;
+    else
+    {
+        index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+        index &= IndexMask ;
+        VCLK = pVBInfo->VCLKData[ index ].CLOCK ;
+    }
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+    data &= 0xf3 ;
+    if ( VCLK >= 200 )
+        data |= 0x0c ;	/* VCLK > 200 */
+
+    if ( HwDeviceExtension->jChipType >= XG20 )
+        data &= ~0x04 ; /* 2 pixel mode */
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , data ) ;
+
+    if ( HwDeviceExtension->jChipType < XG20 )
+    {
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+    data &= 0xE7 ;
+    if ( VCLK < 200 )
+        data |= 0x10 ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , data ) ;
+    }
+
+/*  Jong for Adavantech LCD ripple issue
+    if ( ( VCLK >= 0 ) && ( VCLK < 135 ) )
+        data2 = 0x03 ;
+    else if ( ( VCLK >= 135 ) && ( VCLK < 160 ) )
+        data2 = 0x02 ;
+    else if ( ( VCLK >= 160 ) && ( VCLK < 260 ) )
+        data2 = 0x01 ;
+    else if ( VCLK > 260 )
+          data2 = 0x00 ;
+*/
+    data2 = 0x00 ;
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x07 , 0xFC , data2 ) ;
+    if (HwDeviceExtension->jChipType >= XG27 )
+    {
+      XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x40 , 0xFC , data2&0x03 ) ;
+    }
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VesaLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGI_VesaLowResolution( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT modeflag;
+
+    if ( ModeNo > 0x13 )
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & DoubleScanMode )
+        {
+            if ( modeflag & HalfDCLK )
+            {
+                if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                {
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                    {
+                        if ( pVBInfo->VBInfo & SetInSlaveMode )
+                        {
+                            XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+                            XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+                            return ;
+                        }
+                    }
+                }
+                XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0xff , 0x80 ) ;
+                XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xf7 , 0x00 ) ;
+                return ;
+            }
+        }
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0f , 0x7f , 0x00 ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LoadDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LoadDAC( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT data , data2 , time ,
+           i  , j , k , m , n , o ,
+           si , di , bx , dl , al , ah , dh ,
+           *table = NULL ;
+
+    if ( ModeNo <= 0x13 )
+        data = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    else
+        data = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+
+    data &= DACInfoFlag ;
+    time = 64 ;
+
+    if ( data == 0x00 )
+        table = XGINew_MDA_DAC ;
+    else if ( data == 0x08 )
+        table = XGINew_CGA_DAC ;
+    else if ( data == 0x10 )
+        table = XGINew_EGA_DAC ;
+    else if ( data == 0x18 )
+    {
+        time = 256 ;
+        table = XGINew_VGA_DAC ;
+    }
+
+    if ( time == 256 )
+        j = 16 ;
+    else
+        j = time ;
+
+    XGINew_SetReg3( pVBInfo->P3c6 , 0xFF ) ;
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < j ; i++ )
+    {
+        data = table[ i ] ;
+
+        for( k = 0 ; k < 3 ; k++ )
+        {
+            data2 = 0 ;
+
+            if ( data & 0x01 )
+                data2 = 0x2A ;
+
+            if ( data & 0x02 )
+                data2 += 0x15 ;
+
+            XGINew_SetReg3( pVBInfo->P3c9 , data2 ) ;
+            data = data >> 2 ;
+        }
+    }
+
+    if ( time == 256 )
+    {
+        for( i = 16 ; i < 32 ; i++ )
+        {
+            data = table[ i ] ;
+
+            for( k = 0 ; k < 3 ; k++ )
+                XGINew_SetReg3( pVBInfo->P3c9 , data ) ;
+        }
+
+        si = 32 ;
+
+        for( m = 0 ; m < 9 ; m++ )
+        {
+            di = si ;
+            bx = si + 0x04 ;
+            dl = 0 ;
+
+            for( n = 0 ; n < 3 ; n++ )
+            {
+                for( o = 0 ; o < 5 ; o++ )
+                {
+                    dh = table[ si ] ;
+                    ah = table[ di ] ;
+                    al = table[ bx ] ;
+                    si++ ;
+                    XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+                }
+
+                si -= 2 ;
+
+                for( o = 0 ; o < 3 ; o++ )
+                {
+                    dh = table[ bx ] ;
+                    ah = table[ di ] ;
+                    al = table[ si ] ;
+                    si-- ;
+                    XGI_WriteDAC( dl , ah , al , dh, pVBInfo ) ;
+                }
+
+                dl++ ;
+            }
+
+            si += 5 ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WriteDAC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WriteDAC( USHORT dl , USHORT ah , USHORT al , USHORT dh,PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp , bh , bl ;
+
+    bh = ah ;
+    bl = al ;
+
+    if ( dl != 0 )
+    {
+        temp = bh ;
+        bh = dh ;
+        dh = temp ;
+        if ( dl == 1 )
+        {
+            temp = bl ;
+            bl = dh ;
+            dh = temp ;
+        }
+        else
+        {
+            temp = bl ;
+            bl = bh ;
+            bh = temp ;
+        }
+    }
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )dh ) ;
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bh ) ;
+    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bl ) ;
+}
+
+#if 0
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ClearBuffer */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ClearBuffer( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo, PVB_DEVICE_INFO  pVBInfo)
+{
+    PVOID VideoMemoryAddress = ( PVOID )HwDeviceExtension->pjVideoMemoryAddress ;
+    ULONG AdapterMemorySize  = ( ULONG )HwDeviceExtension->ulVideoMemorySize ;
+    PUSHORT pBuffer ;
+#ifndef LINUX_XF86
+    int i ;
+#endif
+
+    if ( pVBInfo->ModeType >= ModeEGA )
+    {
+        if ( ModeNo > 0x13 )
+        {
+            AdapterMemorySize = 0x40000 ;	/* clear 256k */
+            /* GetDRAMSize( HwDeviceExtension ) ; */
+            XGI_SetMemory( VideoMemoryAddress , AdapterMemorySize , 0 ) ;
+        }
+        else
+        {
+/*
+            pBuffer = VideoMemoryAddress ;
+            for( i = 0 ; i < 0x4000 ; i++ )
+                pBuffer[ i ] = 0x0000 ;
+*/
+        }
+    }
+    else
+    {
+        pBuffer = VideoMemoryAddress ;
+        if ( pVBInfo->ModeType < ModeCGA )
+        {
+/*
+            for ( i = 0 ; i < 0x4000 ; i++ )
+                pBuffer[ i ] = 0x0720 ;
+*/
+        }
+        else
+            XGI_SetMemory( VideoMemoryAddress , 0x8000 , 0 ) ;
+    }
+}
+
+#endif
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDAGroup */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDAGroup( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT RefreshRateTableIndex ;
+    /* USHORT temp ; */
+
+    /* pVBInfo->SelectCRT2Rate = 0 ; */
+
+    pVBInfo->SetFlag |= ProgrammingCRT2 ;
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetLVDSResInfo(  ModeNo , ModeIdIndex,  pVBInfo ) ;
+    XGI_GetLVDSData( ModeNo , ModeIdIndex , RefreshRateTableIndex,  pVBInfo);
+    XGI_ModCRT1Regs( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetLVDSRegs( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetCRT2ECLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSResInfo( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT resindex , xres , yres , modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+
+
+    /* if ( ModeNo > 0x13 ) */
+    /* modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ; */
+    /* else */
+    /* modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ; */
+
+    if ( ModeNo <= 0x13 )
+    {
+        resindex = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        resindex = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;	/* si+Ext_ResInfo */
+    }
+
+    /* resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ; */
+
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;
+    }
+    if ( ModeNo > 0x13 )
+    {
+        if ( modeflag & HalfDCLK )
+            xres = xres << 1 ;
+
+        if ( modeflag & DoubleScanMode )
+            yres = yres << 1 ;
+    }
+    /* if ( modeflag & Charx8Dot ) */
+    /* { */
+
+    if ( xres == 720 )
+        xres = 640 ;
+
+    /* } */
+    pVBInfo->VGAHDE = xres ;
+    pVBInfo->HDE = xres ;
+    pVBInfo->VGAVDE = yres ;
+    pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLVDSData */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLVDSData(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempbx ;
+    XGI330_LVDSDataStruct *LCDPtr = NULL ;
+    XGI330_CHTVDataStruct  *TVPtr = NULL ;
+
+    tempbx = 2 ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        LCDPtr = ( XGI330_LVDSDataStruct * )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo) ;
+        pVBInfo->VGAHT = LCDPtr->VGAHT ;
+        pVBInfo->VGAVT = LCDPtr->VGAVT ;
+        pVBInfo->HT = LCDPtr->LCDHT ;
+        pVBInfo->VT = LCDPtr->LCDVT ;
+    }
+    if ( pVBInfo->IF_DEF_CH7017 == 1 )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            TVPtr = ( XGI330_CHTVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            pVBInfo->VGAHT = TVPtr->VGAHT ;
+            pVBInfo->VGAVT = TVPtr->VGAVT ;
+            pVBInfo->HT = TVPtr->LCDHT ;
+            pVBInfo->VT = TVPtr->LCDVT ;
+        }
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        if ( !( pVBInfo->LCDInfo & ( SetLCDtoNonExpanding | EnableScalingLCD ) ) )
+        {
+            if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+            {
+                pVBInfo->HDE = 1024 ;
+                pVBInfo->VDE = 768 ;
+            }
+            else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            {
+                pVBInfo->HDE = 1280 ;
+                pVBInfo->VDE = 1024 ;
+            }
+            else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+            {
+                pVBInfo->HDE = 1400 ;
+                pVBInfo->VDE = 1050 ;
+            }
+            else
+            {
+                pVBInfo->HDE = 1600 ;
+                pVBInfo->VDE = 1200 ;
+            }
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_ModCRT1Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
+                        USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+{
+    UCHAR index ;
+    USHORT tempbx , i ;
+    XGI_LVDSCRT1HDataStruct  *LCDPtr = NULL ;
+    XGI_LVDSCRT1VDataStruct  *LCDPtr1 =NULL ;
+    /* XGI330_CHTVDataStruct *TVPtr = NULL ; */
+    XGI_CH7007TV_TimingHStruct *CH7007TV_TimingHPtr = NULL;
+    XGI_CH7007TV_TimingVStruct *CH7007TV_TimingVPtr = NULL;
+
+    if( ModeNo <= 0x13 )
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    else
+        index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+
+    index= index & IndexMask ;
+
+    if ( ( pVBInfo->IF_DEF_ScaleLCD == 0 ) || ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) ) )
+    {
+        tempbx = 0 ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            LCDPtr = ( XGI_LVDSCRT1HDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+            for( i = 0 ; i < 8 ; i++ )
+                pVBInfo->TimingH[ 0 ].data[ i ] = LCDPtr[ 0 ].Reg[ i ] ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                CH7007TV_TimingHPtr = ( XGI_CH7007TV_TimingHStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+                for( i = 0 ; i < 8 ; i++ )
+                    pVBInfo->TimingH[ 0 ].data[ i ] = CH7007TV_TimingHPtr[ 0 ].data[ i ] ;
+            }
+        }
+
+        /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        } */
+
+        XGI_SetCRT1Timing_H(pVBInfo,HwDeviceExtension) ;
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , CH7007TV_TimingHPtr[ 0 ].data[ 8 ] ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2F , CH7007TV_TimingHPtr[ 0 ].data[ 9 ] ) ;
+        }
+
+        tempbx = 1 ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            LCDPtr1 = ( XGI_LVDSCRT1VDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            for( i = 0 ; i < 7 ; i++ )
+                pVBInfo->TimingV[ 0 ].data[ i ] = LCDPtr1[ 0 ].Reg[ i ] ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                CH7007TV_TimingVPtr = ( XGI_CH7007TV_TimingVStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+                for( i = 0 ; i < 7 ; i++ )
+                    pVBInfo->TimingV[ 0 ].data[ i ] = CH7007TV_TimingVPtr[ 0 ].data[ i ] ;
+            }
+        }
+        /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+        } */
+
+        XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo , pVBInfo) ;
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+    	    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x33 , ~0x01 , CH7007TV_TimingVPtr[ 0 ].data[ 7 ]&0x01 ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , CH7007TV_TimingVPtr[ 0 ].data[8 ] ) ;
+    	    XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , CH7007TV_TimingVPtr[ 0 ].data[9 ] ) ;
+
+        }
+    }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLVDSRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempbx , tempax , tempcx , tempdx , push1 , push2 , modeflag ;
+    unsigned long temp , temp1 , temp2 , temp3 , push3 ;
+    XGI330_LCDDataDesStruct  *LCDPtr = NULL ;
+    XGI330_LCDDataDesStruct2  *LCDPtr1 = NULL ;
+
+    if ( ModeNo > 0x13 )
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    else
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+
+    if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+    {
+        if ( ( pVBInfo->IF_DEF_CH7017 == 0 ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+        {
+            if ( pVBInfo->IF_DEF_OEMUtil == 1 )
+            {
+    	        tempbx = 8 ;
+    	        LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            }
+
+            if ( ( pVBInfo->IF_DEF_OEMUtil == 0 ) || ( LCDPtr == 0 ) )
+            {
+                tempbx = 3 ;
+                if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                    LCDPtr1 = ( XGI330_LCDDataDesStruct2 * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+                else
+                    LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+            }
+
+            XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+            push1 = tempbx ;
+            push2 = tempax ;
+
+            /* GetLCDResInfo */
+            if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+            {
+                tempax = 1024 ;
+                tempbx = 768 ;
+            }
+            else if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            {
+                tempax = 1280 ;
+                tempbx = 1024 ;
+            }
+            else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+            {
+                tempax = 1400 ;
+                tempbx = 1050 ;
+            }
+            else
+            {
+                tempax = 1600 ;
+                tempbx = 1200 ;
+            }
+
+            if ( pVBInfo->LCDInfo & SetLCDtoNonExpanding )
+            {
+                pVBInfo->HDE=tempax;
+                pVBInfo->VDE=tempbx;
+                pVBInfo->VGAHDE=tempax;
+                pVBInfo->VGAVDE=tempbx;
+            }
+
+            if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( pVBInfo->LCDInfo & EnableScalingLCD ) )
+            {
+                tempax=pVBInfo->HDE;
+                tempbx=pVBInfo->VDE;
+            }
+
+            tempax = pVBInfo->HT ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDHDES ;
+            else
+                tempbx = LCDPtr->LCDHDES ;
+
+            tempcx = pVBInfo->HDE ;
+            tempbx = tempbx & 0x0fff ;
+            tempcx += tempbx ;
+
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , tempbx & 0x07 ) ;
+
+            tempcx = tempcx >> 3 ;
+            tempbx = tempbx >> 3 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , ( USHORT )( tempcx & 0xff ) ) ;
+
+            tempax = pVBInfo->HT ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDHRS ;
+            else
+                tempbx = LCDPtr->LCDHRS ;
+
+            tempcx = push2 ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempcx = LCDPtr1->LCDHSync ;
+
+            tempcx += tempbx ;
+
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            tempax = tempbx & 0x07 ;
+            tempax = tempax >> 5 ;
+            tempcx = tempcx >> 3 ;
+            tempbx = tempbx >> 3 ;
+
+            tempcx &= 0x1f ;
+            tempax |= tempcx ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x15 , tempax ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x14 , ( USHORT )( tempbx & 0xff ) ) ;
+
+            tempax = pVBInfo->VT ;
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDVDES ;
+            else
+                tempbx = LCDPtr->LCDVDES ;
+            tempcx = pVBInfo->VDE ;
+
+            tempbx = tempbx & 0x0fff ;
+            tempcx += tempbx ;
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1b , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1c , ( USHORT )( tempcx & 0xff ) ) ;
+
+            tempbx = ( tempbx >> 8 ) & 0x07 ;
+            tempcx = ( tempcx >> 8 ) & 0x07 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1d , ( USHORT )( ( tempcx << 3 ) | tempbx ) ) ;
+
+            tempax = pVBInfo->VT ;
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempbx = LCDPtr1->LCDVRS ;
+            else
+                tempbx = LCDPtr->LCDVRS ;
+
+            /* tempbx = tempbx >> 4 ; */
+              tempcx = push1 ;
+
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                tempcx = LCDPtr1->LCDVSync ;
+
+            tempcx += tempbx ;
+            if ( tempcx >= tempax )
+                tempcx -= tempax ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , ( USHORT )( tempbx & 0xff ) ) ;
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , ~0x0f , ( USHORT )( tempcx & 0x0f ) ) ;
+
+            tempax = ( ( tempbx >> 8 ) & 0x07 ) << 3 ;
+
+            tempbx = pVBInfo->VGAVDE ;
+            if ( tempbx != pVBInfo->VDE )
+                tempax |= 0x40 ;
+
+            if ( pVBInfo->LCDInfo & EnableLVDSDDA )
+                tempax |= 0x40 ;
+
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1a , 0x07 , tempax ) ;
+
+            tempcx = pVBInfo->VGAVT ;
+            tempbx = pVBInfo->VDE ;
+            tempax = pVBInfo->VGAVDE ;
+            tempcx -= tempax ;
+
+            temp = tempax ;            /* 0430 ylshieh */
+            temp1 = ( temp << 18 ) / tempbx ;
+
+            tempdx = ( USHORT )( ( temp << 18 ) % tempbx ) ;
+
+            if ( tempdx != 0 )
+            temp1 += 1 ;
+
+            temp2 = temp1 ;
+            push3 = temp2 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x37 , ( USHORT )( temp2 & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x36 , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+
+            tempbx = ( USHORT )( temp2 >> 16 ) ;
+            tempax = tempbx & 0x03 ;
+
+            tempbx = pVBInfo->VGAVDE ;
+            if ( tempbx == pVBInfo->VDE )
+                tempax |= 0x04 ;
+
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x35 , tempax ) ;
+
+            if ( pVBInfo->VBType & VB_XGI301C )
+            {
+                temp2 = push3 ;
+      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3c , ( USHORT )( temp2 & 0xff ) ) ;
+      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3b , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+      	        tempbx = ( USHORT )( temp2 >> 16 ) ;
+      	        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x3a , ~0xc0 , ( USHORT )( ( tempbx & 0xff ) << 6 ) ) ;
+
+                tempcx = pVBInfo->VGAVDE ;
+                if ( tempcx == pVBInfo->VDE )
+                    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x00 ) ;
+                else
+                    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x30 , ~0x0c , 0x08 ) ;
+            }
+
+            tempcx = pVBInfo->VGAHDE ;
+            tempbx = pVBInfo->HDE ;
+
+            temp1 = tempcx << 16 ;
+
+            tempax = ( USHORT )( temp1 / tempbx ) ;
+
+            if ( ( tempbx & 0xffff ) == ( tempcx & 0xffff ) )
+                tempax = 65535 ;
+
+            temp3 = tempax ;
+            temp1 = pVBInfo->VGAHDE << 16 ;
+
+            temp1 /= temp3 ;
+            temp3 = temp3 << 16 ;
+            temp1 -= 1 ;
+
+            temp3 = ( temp3 & 0xffff0000 ) + ( temp1 & 0xffff ) ;
+
+            tempax = ( USHORT )( temp3 & 0xff ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x1f , tempax ) ;
+
+            temp1 = pVBInfo->VGAVDE << 18 ;
+            temp1 = temp1 / push3 ;
+            tempbx = ( USHORT )( temp1 & 0xffff ) ;
+
+            if ( pVBInfo->LCDResInfo == Panel1024x768 )
+                tempbx -= 1 ;
+
+            tempax = ( ( tempbx >> 8 ) & 0xff ) << 3 ;
+            tempax |= ( USHORT )( ( temp3 >> 8 ) & 0x07 ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x20 , ( USHORT )( tempax & 0xff ) ) ;
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x21 , ( USHORT )( tempbx & 0xff ) ) ;
+
+            temp3 = temp3 >> 16 ;
+
+            if ( modeflag & HalfDCLK )
+                temp3 = temp3 >> 1 ;
+
+            XGINew_SetReg1(pVBInfo->Part1Port , 0x22 , ( USHORT )( ( temp3 >> 8 ) & 0xff ) ) ;
+            XGINew_SetReg1(pVBInfo->Part1Port , 0x23 , ( USHORT )( temp3 & 0xff ) ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ECLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+{
+    UCHAR di_0 , di_1 , tempal ;
+    int i ;
+
+    tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetVCLKLen( tempal , &di_0 , &di_1, pVBInfo ) ;
+    XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+    for( i = 0 ; i < 4 ; i++ )
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , ~0x30 , ( USHORT )( 0x10 * i ) ) ;
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+        }
+        else if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2e , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2f , di_1 ) ;
+        }
+        else
+        {
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x2c , di_1 ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UpdateModeInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UpdateModeInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempcl ,
+           tempch ,
+           temp ,
+           tempbl ,
+           tempax ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempcl = 0 ;
+        tempch = 0 ;
+        temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+        if ( !( temp & 0x20 ) )
+        {
+            temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+            if ( temp & 0x80 )
+            {
+                if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
+                    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) ;
+                else
+                    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+
+                if ( !( temp & 0x40 ) )
+                    tempcl |= ActiveCRT1 ;
+            }
+        }
+
+        temp = XGINew_GetReg1( pVBInfo->Part1Port , 0x2e ) ;
+        temp &= 0x0f ;
+
+        if ( !( temp == 0x08 ) )
+        {
+            tempax = XGINew_GetReg1( pVBInfo->Part1Port , 0x13 ) ;	/* Check ChannelA by Part1_13 [2003/10/03] */
+            if ( tempax & 0x04 )
+               	tempcl = tempcl | ActiveLCD ;
+
+            temp &= 0x05 ;
+
+            if ( !( tempcl & ActiveLCD ) )
+            	if ( temp == 0x01 )
+                    tempcl |= ActiveCRT2 ;
+
+            if ( temp == 0x04 )
+                tempcl |= ActiveLCD ;
+
+            if ( temp == 0x05 )
+            {
+                temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
+
+                if( !( temp & 0x08 ) )
+                    tempch |= ActiveAVideo ;
+
+                if ( !( temp & 0x04 ) )
+                    tempch |= ActiveSVideo ;
+
+                if ( temp & 0x02 )
+                    tempch |= ActiveSCART ;
+
+                if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+                {
+                    if ( temp & 0x01 )
+                        tempch |= ActiveHiTV ;
+                }
+
+                if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+                {
+                    temp = XGINew_GetReg1( pVBInfo->Part2Port , 0x4d ) ;
+
+                    if ( temp & 0x10 )
+                        tempch |= ActiveYPbPr ;
+                }
+
+                if ( tempch != 0 )
+                    tempcl |= ActiveTV ;
+            }
+        }
+
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
+        if ( tempcl & ActiveLCD )
+        {
+            if ( ( pVBInfo->SetFlag & ReserveTVOption ) )
+            {
+                if ( temp & ActiveTV )
+                    tempcl |= ActiveTV ;
+            }
+        }
+        temp = tempcl ;
+        tempbl = ~ModeSwitchStatus ;
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x3d , tempbl , temp ) ;
+
+        if ( !( pVBInfo->SetFlag & ReserveTVOption ) )
+            XGINew_SetReg1( pVBInfo->P3d4 , 0x3e , tempch ) ;
+    }
+    else
+    {
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVGAType( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo)
+{
+    /*
+    if ( HwDeviceExtension->jChipType >= XG20 )
+    {
+        pVBInfo->Set_VGAType = XG20;
+    }
+    else if ( HwDeviceExtension->jChipType >= XG40 )
+    {
+        pVBInfo->Set_VGAType = VGA_XGI340 ;
+    }
+    */
+    pVBInfo->Set_VGAType = HwDeviceExtension->jChipType;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBType */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo)
+{
+    USHORT flag , tempbx , tempah ;
+
+    if ( pVBInfo->IF_DEF_CH7007 == 1 )
+    {
+        pVBInfo->VBType = VB_CH7007 ;
+        return;
+    }
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        tempbx = VB_XGI302B ;
+        flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+        if ( flag != 0x02 )
+        {
+            tempbx = VB_XGI301 ;
+            flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
+            if ( flag >= 0xB0 )
+            {
+                tempbx = VB_XGI301B ;
+                if ( flag >= 0xC0 )
+                {
+                    tempbx = VB_XGI301C ;
+                    if ( flag >= 0xD0 )
+                    {
+                        tempbx = VB_XGI301LV ;
+                        if ( flag >= 0xE0 )
+                        {
+                            tempbx = VB_XGI302LV ;
+                            tempah = XGINew_GetReg1( pVBInfo->Part4Port , 0x39 ) ;
+                            if ( tempah != 0xFF )
+                                tempbx = VB_XGI301C ;
+                        }
+                    }
+                }
+
+                if ( tempbx & ( VB_XGI301B | VB_XGI302B ) )
+                {
+                    flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x23 ) ;
+
+                    if ( !( flag & 0x02 ) )
+                        tempbx = tempbx | VB_NoLCD ;
+                }
+            }
+        }
+        pVBInfo->VBType = tempbx ;
+    }
+/*
+    else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        pVBInfo->VBType = VB_CH7017 ;
+    else  //LVDS
+        pVBInfo->VBType = VB_LVDS_NS ;
+*/
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVBInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVBInfo( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT tempax ,
+           push ,
+           tempbx ,
+           temp ,
+           modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    pVBInfo->SetFlag = 0 ;
+    pVBInfo->ModeType = modeflag & ModeInfoFlag ;
+    tempbx = 0 ;
+
+    if ( pVBInfo->VBType & 0xFFFF )
+    {
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x30 ) ;           /* Check Display Device */
+        tempbx = tempbx | temp ;
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x31 ) ;
+        push = temp ;
+        push = push << 8 ;
+        tempax = temp << 8 ;
+        tempbx = tempbx | tempax ;
+        temp = ( SetCRT2ToDualEdge | SetCRT2ToYPbPr | SetCRT2ToLCDA | SetInSlaveMode | DisableCRT2Display ) ;
+        temp = 0xFFFF ^ temp ;
+        tempbx &= temp ;
+
+        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ;
+
+        if ( pVBInfo->IF_DEF_LCDA == 1 )
+        {
+
+            if ( ( pVBInfo->Set_VGAType >= XG20 ) || ( pVBInfo->Set_VGAType >= XG40 ))
+            {
+                if ( pVBInfo->IF_DEF_LVDS == 0 )
+                {
+                    /* if ( ( pVBInfo->VBType & VB_XGI302B ) || ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) */
+                    if ( pVBInfo->VBType & ( VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        if ( temp & EnableDualEdge )
+                        {
+                            tempbx |= SetCRT2ToDualEdge ;
+
+                            if ( temp & SetToLCDA )
+                                tempbx |= SetCRT2ToLCDA ;
+                        }
+                    }
+                }
+                else if ( pVBInfo->IF_DEF_CH7017 == 1 )
+                {
+                    if ( pVBInfo->VBType & VB_CH7017 )
+                    {
+                        if ( temp & EnableDualEdge )
+                        {
+                            tempbx |= SetCRT2ToDualEdge ;
+
+                            if ( temp & SetToLCDA )
+                                tempbx |= SetCRT2ToLCDA ;
+                        }
+                    }
+                }
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( ( ( pVBInfo->IF_DEF_LVDS == 0 ) && ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) )
+            || ( ( pVBInfo->IF_DEF_CH7017 == 1 ) && ( pVBInfo->VBType&VB_CH7017 ) ) || ( (pVBInfo->IF_DEF_CH7007 == 1) && (pVBInfo->VBType&VB_CH7007) ) )    /* [Billy] 07/05/04 */
+            {
+                if ( temp & SetYPbPr )	/* temp = CR38 */
+                {
+                    if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    {
+                        temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;  /* shampoo add for new scratch */
+                        temp &= YPbPrMode ;
+                        tempbx |= SetCRT2ToHiVisionTV ;
+
+                        if ( temp != YPbPrMode1080i ) {
+                            tempbx &= ( ~SetCRT2ToHiVisionTV ) ;
+                            tempbx |= SetCRT2ToYPbPr ; }
+                    }
+
+                    /* tempbx |= SetCRT2ToYPbPr ; */
+                }
+            }
+        }
+
+        tempax = push ;  /* restore CR31 */
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->IF_DEF_YPbPr == 1 )
+            {
+                if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    temp = 0x09FC ;
+                else
+                    temp = 0x097C ;
+            }
+            else
+            {
+                if ( pVBInfo->IF_DEF_HiVision == 1 )
+                    temp = 0x01FC ;
+                else
+                    temp = 0x017C ;
+            }
+        }
+        else	/* 3nd party chip */
+        {
+            if ( pVBInfo->IF_DEF_CH7017 == 1 )
+                temp = ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) ;
+            else if ( pVBInfo->IF_DEF_CH7007 == 1 )  /* [Billy] 07/05/03 */
+            {
+                temp = SetCRT2ToTV ;
+            }
+            else
+                temp = SetCRT2ToLCD ;
+        }
+
+        if ( !( tempbx & temp ) )
+        {
+            tempax |= DisableCRT2Display ;
+            tempbx = 0 ;
+        }
+
+        if ( pVBInfo->IF_DEF_LCDA == 1 )	/* Select Display Device */
+        {
+            if ( !( pVBInfo->VBType & VB_NoLCD ) )
+            {
+                if ( tempbx & SetCRT2ToLCDA )
+                {
+                    if ( tempbx & SetSimuScanMode )
+                        tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SwitchToCRT2 ) ) ;
+                    else
+                        tempbx &= ( ~( SetCRT2ToLCD | SetCRT2ToRAMDAC | SetCRT2ToTV | SwitchToCRT2 ) ) ;
+                }
+            }
+        }
+
+        /* shampoo add */
+        if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) )	/* for driver abnormal */
+        {
+            if ( pVBInfo->IF_DEF_CRT2Monitor == 1 )
+            {
+                if ( tempbx & SetCRT2ToRAMDAC )
+                {
+                    tempbx &= ( 0xFF00 | SetCRT2ToRAMDAC | SwitchToCRT2 | SetSimuScanMode ) ;
+                    tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+                }
+            }
+            else
+                tempbx &= ( ~( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ;
+        }
+
+        if ( !( pVBInfo->VBType & VB_NoLCD ) )
+        {
+            if ( tempbx & SetCRT2ToLCD )
+            {
+                tempbx &= ( 0xFF00 | SetCRT2ToLCD | SwitchToCRT2 | SetSimuScanMode ) ;
+                tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+            }
+        }
+
+        if ( tempbx & SetCRT2ToSCART )
+        {
+            tempbx &= ( 0xFF00 | SetCRT2ToSCART | SwitchToCRT2 | SetSimuScanMode ) ;
+            tempbx &= ( 0x00FF | ( ~SetCRT2ToYPbPr ) ) ;
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( tempbx & SetCRT2ToYPbPr )
+                tempbx &= ( 0xFF00 | SwitchToCRT2 | SetSimuScanMode ) ;
+        }
+
+        if ( pVBInfo->IF_DEF_HiVision == 1 )
+        {
+            if ( tempbx & SetCRT2ToHiVisionTV )
+                tempbx &= ( 0xFF00 | SetCRT2ToHiVisionTV | SwitchToCRT2 | SetSimuScanMode ) ;
+        }
+
+        if ( tempax & DisableCRT2Display )	/* Set Display Device Info */
+        {
+            if ( !( tempbx & ( SwitchToCRT2 | SetSimuScanMode ) ) )
+                tempbx = DisableCRT2Display ;
+        }
+
+        if ( !( tempbx & DisableCRT2Display ) )
+        {
+            if ( ( !( tempbx & DriverMode ) ) || ( !( modeflag & CRT2Mode ) ) )
+            {
+                if ( pVBInfo->IF_DEF_LCDA == 1 )
+      	        {
+                    if ( !( tempbx & SetCRT2ToLCDA ) )
+                        tempbx |= ( SetInSlaveMode | SetSimuScanMode ) ;
+                }
+
+                if ( pVBInfo->IF_DEF_VideoCapture == 1 )
+                {
+                    if ( ( ( HwDeviceExtension->jChipType == XG40 ) && ( pVBInfo->Set_VGAType == XG40 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG41 ) && ( pVBInfo->Set_VGAType == XG41 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG42 ) && ( pVBInfo->Set_VGAType == XG42 ) )
+                    || ( ( HwDeviceExtension->jChipType == XG45 ) && ( pVBInfo->Set_VGAType == XG45 ) ) )
+                    {
+                        if ( ModeNo <= 13 )
+                        {
+                            if ( !( tempbx & SetCRT2ToRAMDAC ) )	/*CRT2 not need to support*/
+                            {
+                                tempbx &= ( 0x00FF | ( ~SetInSlaveMode ) ) ;
+                                pVBInfo->SetFlag |= EnableVCMode ;
+                            }
+                        }
+                    }
+                }
+            }
+
+            /*LCD+TV can't support in slave mode (Force LCDA+TV->LCDB)*/
+            if ( ( tempbx & SetInSlaveMode ) && ( tempbx & SetCRT2ToLCDA ) )
+            {
+                tempbx ^= ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToDualEdge ) ;
+                pVBInfo->SetFlag |= ReserveTVOption ;
+            }
+        }
+    }
+
+    pVBInfo->VBInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVInfo( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO  pVBInfo )
+{
+    USHORT temp ,
+           tempbx = 0 ,
+           resinfo = 0 ,
+           modeflag ,
+           index1 ;
+
+    tempbx = 0 ;
+    resinfo = 0 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( ModeNo <= 0x13 )
+        {
+            modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ModeFlag */
+            resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;	/* si+St_ResInfo */
+        }
+        else
+        {
+            modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+            resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo */
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+            tempbx = temp;
+            if ( tempbx & SetPALTV )
+            {
+                tempbx &= ( SetCHTVOverScan | SetPALMTV | SetPALNTV | SetPALTV ) ;
+                if ( tempbx & SetPALMTV )
+                    tempbx &= ~SetPALTV ; /* set to NTSC if PAL-M */
+            }
+            else
+                tempbx &= ( SetCHTVOverScan | SetNTSCJ | SetPALTV ) ;
+/*
+            if ( pVBInfo->IF_DEF_LVDS == 0 )
+            {
+                index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x38 ) ; //PAL-M/PAL-N Info
+                temp2 = ( index1 & 0xC0 ) >> 5 ; 	        //00:PAL, 01:PAL-M, 10:PAL-N
+                tempbx |= temp2 ;
+                if ( temp2 & 0x02 )          //PAL-M
+                    tempbx &= ( ~SetPALTV ) ;
+            }
+*/
+        }
+
+        if ( pVBInfo->IF_DEF_CH7017 == 1 )
+        {
+            tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+            if ( tempbx & TVOverScan )
+                tempbx |= SetCHTVOverScan ;
+        }
+
+        if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 07/05/04 */
+        {
+            tempbx = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+
+            if ( tempbx & TVOverScan )
+            {
+                tempbx |= SetCHTVOverScan ;
+            }
+        }
+
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+                tempbx |= SetPALTV ;
+        }
+
+        if ( pVBInfo->IF_DEF_YPbPr == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+            {
+                index1 = XGINew_GetReg1( pVBInfo->P3d4 , 0x35 ) ;
+                index1 &= YPbPrMode ;
+
+                if ( index1 == YPbPrMode525i )
+                    tempbx |= SetYPbPrMode525i ;
+
+                if ( index1 == YPbPrMode525p )
+                    tempbx = tempbx | SetYPbPrMode525p;
+                if ( index1 == YPbPrMode750p)
+                    tempbx = tempbx | SetYPbPrMode750p;
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_HiVision == 1 )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+            {
+                tempbx = tempbx | SetYPbPrMode1080i | SetPALTV ;
+            }
+        }
+
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {      /* shampoo */
+            if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->VBInfo & SetNotSimuMode ) ) )
+                tempbx |= TVSimuMode ;
+
+            if ( !( tempbx & SetPALTV ) && ( modeflag > 13 ) && ( resinfo == 8 ) ) /* NTSC 1024x768, */
+                tempbx |= NTSC1024x768 ;
+
+            tempbx |= RPLLDIV2XO ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+            {
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                    tempbx &=( ~RPLLDIV2XO ) ;
+            }
+            else
+            {
+                if ( tempbx & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+                    tempbx &= ( ~RPLLDIV2XO ) ;
+                else if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+                {
+                    if ( tempbx & TVSimuMode )
+                        tempbx &= ( ~RPLLDIV2XO ) ;
+                }
+            }
+        }
+    }
+    pVBInfo->TVInfo = tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_GetLCDInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ,
+           tempax ,
+           tempbx ,
+           modeflag ,
+           resinfo = 0 ,
+           LCDIdIndex ;
+
+    pVBInfo->LCDResInfo = 0 ;
+    pVBInfo->LCDTypeInfo = 0 ;
+    pVBInfo->LCDInfo = 0 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;  /* si+St_ModeFlag // */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ; /* si+Ext_ResInfo// */
+    }
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ; /* Get LCD Res.Info */
+    tempbx = temp & 0x0F ;
+
+    if ( tempbx == 0 )
+        tempbx = Panel1024x768 ; /* default */
+
+    /* LCD75 [2003/8/22] Vicent */
+    if ( ( tempbx == Panel1024x768 ) || ( tempbx == Panel1280x1024 ) )
+    {
+        if ( pVBInfo->VBInfo & DriverMode )
+        {
+            tempax = XGINew_GetReg1( pVBInfo->P3d4 , 0x33 ) ;
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                tempax &= 0x0F ;
+            else
+                tempax = tempax >> 4 ;
+
+            if ( ( resinfo == 6 ) || ( resinfo == 9 ) )
+            {
+                if ( tempax >= 3 )
+      	            tempbx |= PanelRef75Hz ;
+            }
+            else if ( ( resinfo == 7 ) || ( resinfo == 8 ) )
+            {
+      	        if ( tempax >= 4 )
+      	            tempbx |= PanelRef75Hz ;
+            }
+        }
+    }
+
+    pVBInfo->LCDResInfo = tempbx ;
+
+    /* End of LCD75 */
+
+    if( pVBInfo->IF_DEF_OEMUtil == 1 )
+    {
+        pVBInfo->LCDTypeInfo = ( temp & 0xf0 ) >> 4 ;
+    }
+
+    if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+    {
+        return 0;
+    }
+
+    tempbx = 0 ;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+    temp &= ( ScalingLCD | LCDNonExpanding | LCDSyncBit | SetPWDEnable ) ;
+
+    if ( ( pVBInfo->IF_DEF_ScaleLCD == 1 ) && ( temp & LCDNonExpanding ) )
+        temp &= ~EnableScalingLCD ;
+
+    tempbx |= temp ;
+
+    LCDIdIndex = XGI_GetLCDCapPtr1(pVBInfo) ;
+
+    tempax = pVBInfo->LCDCapList[ LCDIdIndex ].LCD_Capability ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )	/* shampoo */
+    {
+        if ( ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) ) && ( tempax & LCDDualLink ) )
+        {
+            tempbx |= SetLCDDualLink ;
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_CH7017 == 1 )
+    {
+        if ( tempax & LCDDualLink )
+        {
+            tempbx |= SetLCDDualLink ;
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( ( pVBInfo->LCDResInfo == Panel1400x1050 ) && ( pVBInfo->VBInfo & SetCRT2ToLCD ) && ( ModeNo > 0x13 ) && ( resinfo == 9 ) && ( !( tempbx & EnableScalingLCD ) ) )
+            tempbx |= SetLCDtoNonExpanding ;	/* set to center in 1280x1024 LCDB for Panel1400x1050 */
+    }
+
+/*
+    if ( tempax & LCDBToA )
+    {
+        tempbx |= SetLCDBToA ;
+    }
+*/
+
+    if ( pVBInfo->IF_DEF_ExpLink == 1 )
+    {
+        if ( modeflag & HalfDCLK )
+        {
+            /* if ( !( pVBInfo->LCDInfo&LCDNonExpanding ) ) */
+            if ( !( tempbx & SetLCDtoNonExpanding ) )
+            {
+                tempbx |= EnableLVDSDDA ;
+            }
+            else
+            {
+                if ( ModeNo > 0x13 )
+                {
+                    if ( pVBInfo->LCDResInfo == Panel1024x768 )
+                    {
+                        if ( resinfo == 4 )
+                        {                                /* 512x384  */
+                            tempbx |= EnableLVDSDDA ;
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+    {
+        if ( pVBInfo->VBInfo & SetNotSimuMode )
+        {
+            tempbx |= LCDVESATiming ;
+        }
+    }
+    else
+    {
+        tempbx |= LCDVESATiming ;
+    }
+
+    pVBInfo->LCDInfo = tempbx ;
+
+    if ( pVBInfo->IF_DEF_PWD == 1 )
+    {
+        if ( pVBInfo->LCDInfo & SetPWDEnable )
+        {
+            if ( ( pVBInfo->VBType & VB_XGI302LV ) || ( pVBInfo->VBType & VB_XGI301C ) )
+            {
+                if ( !( tempax & PWDEnable ) )
+                {
+                    pVBInfo->LCDInfo &= ~SetPWDEnable ;
+                }
+            }
+        }
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( !( tempax & LockLCDBToA ) )
+                {
+                    if ( ModeNo <= 0x13 )
+                    {
+                        pVBInfo->VBInfo &= ~( SetSimuScanMode | SetInSlaveMode | SetCRT2ToLCD ) ;
+                        pVBInfo->VBInfo |= SetCRT2ToLCDA | SetCRT2ToDualEdge ;
+                    }
+                }
+            }
+        }
+    }
+
+/*
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        if ( tempax & ( LockLCDBToA | StLCDBToA ) )
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( !( ( !( tempax & LockLCDBToA ) ) && ( ModeNo > 0x13 ) ) )
+                {
+                    pVBInfo->VBInfo&=~(SetSimuScanMode|SetInSlaveMode|SetCRT2ToLCD);
+                    pVBInfo->VBInfo|=SetCRT2ToLCDA|SetCRT2ToDualEdge;
+                }
+            }
+        }
+    }
+*/
+
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SearchModeID */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+
+#ifdef TC
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        VGA_INFO = ( PUCHAR )MK_FP( 0 , 0x489 ) ;
+
+        if ( ModeNo == 0x07 )
+        {
+            if ( ( *VGA_INFO & 0x10 ) != 0 )
+                ( *ModeIdIndex )++ ; /* 400 lines */
+            /* else 350 lines */
+        }
+
+        if ( ModeNo <= 3 )
+        {
+            if ( ( *VGA_INFO & 0x80 ) == 0 )
+            {
+                ( *ModeIdIndex )++ ;
+                if ( ( *VGA_INFO & 0x10 ) != 0 )
+                    ( *ModeIdIndex )++ ; /* 400 lines */
+                /* else 350 lines */
+            }
+            /* else 200 lines */
+        }
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+
+#endif
+
+#ifdef WIN2000
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        if ( ModeNo == 0x07 )
+            ( *ModeIdIndex )++ ; /* 400 lines */
+
+        if ( ModeNo <=3 )
+            ( *ModeIdIndex ) += 2 ; /* 400 lines */
+        /* else 350 lines */
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+#endif
+
+#ifdef LINUX /* chiawen for linux solution */
+
+    if ( ModeNo <= 5 )
+        ModeNo |= 1 ;
+    if ( ModeNo <= 0x13 )
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+
+        if ( ModeNo == 0x07 )
+            ( *ModeIdIndex )++ ; /* 400 lines */
+
+        if ( ModeNo <= 3 )
+            ( *ModeIdIndex ) += 2 ; /* 400 lines */
+        /* else 350 lines */
+    }
+    else
+    {
+        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
+        {
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
+                break ;
+            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
+                return( FALSE ) ;
+        }
+    }
+
+#endif
+
+    return( TRUE ) ;
+}
+
+
+
+
+/* win2000 MM adapter not support standard mode! */
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT memorysize ,
+           modeflag ,
+           temp ,
+           temp1 ,
+           tmp ;
+
+/*  if ( ( HwDeviceExtension->jChipType == XGI_650 ) ||
+         ( HwDeviceExtension->jChipType == XGI_650M ) )
+    {
+        return( TRUE ) ;
+    } */
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else  {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    /* ModeType = modeflag&ModeInfoFlag ; // Get mode type */
+
+    memorysize = modeflag & MemoryInfoFlag ;
+    memorysize = memorysize > MemorySizeShift ;
+    memorysize++ ;					/* Get memory size */
+
+    temp = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;	/* Get DRAM Size */
+    tmp = temp ;
+
+    if ( HwDeviceExtension->jChipType == XG40 )
+    {
+        temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+        if ( ( tmp & 0x0c ) == 0x0C )			/* Qual channels */
+        {
+            temp <<= 2 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x08 )		/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG42 )
+    {
+    	temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+        if ( ( tmp & 0x04 ) == 0x04 )			/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    else if ( HwDeviceExtension->jChipType == XG45 )
+    {
+    	temp = 1 << ( ( temp & 0x0F0 ) >> 4 ) ;		/* memory size per channel SR14[7:4] */
+    	if ( ( tmp & 0x0c ) == 0x0C )			/* Qual channels */
+        {
+            temp <<= 2 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x08 )		/* triple channels */
+        {
+            temp1 = temp ;
+            temp <<= 1 ;
+            temp += temp1 ;
+        }
+        else if ( ( tmp & 0x0c ) == 0x04 )		/* Dual channels */
+        {
+            temp <<= 1 ;
+        }
+    }
+    if ( temp < memorysize )
+        return( FALSE ) ;
+    else
+        return( TRUE ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_IsLowResolution */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+/*void XGINew_IsLowResolution( USHORT ModeNo , USHORT ModeIdIndex, BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT data ;
+    USHORT ModeFlag ;
+
+    data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+    data &= 0x7F ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+
+    if ( ModeNo > 0x13 )
+    {
+        ModeFlag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        if ( ( ModeFlag & HalfDCLK ) && ( ModeFlag & DoubleScanMode ) )
+        {
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
+            data |= 0x80 ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x0F , data ) ;
+            data = XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+            data &= 0xF7 ;
+            XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;
+        }
+    }
+}
+
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR(pVBInfo->P3c4,0x01,0xDF,0x00);
+    if ( pXGIHWDE->jChipType == XG21 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         if (!(XGI_XG21GetPSCValue( pVBInfo )&0x1))
+         {
+            XGI_XG21BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+            XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+         }
+         if (!(XGI_XG21GetPSCValue( pVBInfo )&0x20))
+         {
+            XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+         }
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+         XGI_XG21BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+       }
+       else
+       {
+            XGI_XG21BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+       }
+
+    }
+
+    if (pVBInfo->IF_DEF_CH7007 == 1) /* [Billy] 07/05/23 For CH7007 */
+    {
+#ifdef WIN2000
+       if ( IsCH7007TVMode( pVBInfo ) )
+       {
+           TurnOnCH7007(pXGIHWDE->pDevice) ; /* 07/05/28 */
+       }
+#endif
+
+    }
+
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         if (!(XGI_XG27GetPSCValue( pVBInfo )&0x1))
+         {
+            XGI_XG27BLSignalVDD( 0x01 , 0x01, pVBInfo ) ; /* LVDS VDD on */
+            XGI_XG21SetPanelDelay( 2,pVBInfo ) ;
+         }
+         if (!(XGI_XG27GetPSCValue( pVBInfo )&0x20))
+         {
+            XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* LVDS signal on */
+         }
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+         XGI_XG27BLSignalVDD( 0x02 , 0x02, pVBInfo ) ; /* LVDS backlight on */
+       }
+       else
+       {
+            XGI_XG27BLSignalVDD( 0x20 , 0x20, pVBInfo ) ; /* DVO/DVI signal on */
+       }
+
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisplayOff */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+{
+
+    if ( pXGIHWDE->jChipType == XG21 )
+    {
+       if ( pVBInfo->IF_DEF_LVDS == 1 )
+       {
+         XGI_XG21BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+       }
+       else
+       {
+            XGI_XG21BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+       }
+    }
+
+    if (pVBInfo->IF_DEF_CH7007 == 1) /*[Billy] 07/05/23 For CH7007 */
+    {
+       /* if( IsCH7007TVMode( pVBInfo ) == 0 ) */
+       {
+#ifdef WIN2000
+         TurnOffCH7007(pXGIHWDE->pDevice) ;  /* 07/05/28 */
+#endif
+       }
+    }
+
+
+    if ( pXGIHWDE->jChipType == XG27 )
+    {
+       if ((XGI_XG27GetPSCValue( pVBInfo )&0x2))
+       {
+         XGI_XG27BLSignalVDD( 0x02 , 0x00, pVBInfo ) ; /* LVDS backlight off */
+         XGI_XG21SetPanelDelay( 3,pVBInfo ) ;
+       }
+
+       if ( pVBInfo->IF_DEF_LVDS == 0 )
+       {
+            XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* DVO/DVI signal off */
+       }
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x01 , 0xDF , 0x20 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisply */
+/* Input : */
+/* Output : */
+/* Description : chiawen for sensecrt1 */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisply( PVB_DEVICE_INFO pVBInfo )
+{
+    while( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+        break ;
+
+    while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
+        break ;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SenseCRT1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+
+void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR CRTCData[ 17 ] = { 0x5F , 0x4F , 0x50 , 0x82 , 0x55 , 0x81 ,
+                             0x0B , 0x3E , 0xE9 , 0x0B , 0xDF , 0xE7 ,
+                             0x04 , 0x00 , 0x00 , 0x05 , 0x00 } ;
+
+    UCHAR SR01 = 0 , SR1F = 0 , SR07 = 0 , SR06 = 0 ;
+
+    UCHAR CR17 , CR63 , SR31 ;
+    USHORT temp ;
+    UCHAR DAC_TEST_PARMS[ 3 ] = { 0x0F , 0x0F , 0x0F } ;
+
+    int i ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
+
+    /* [2004/05/06] Vicent to fix XG42 single LCD sense to CRT+LCD */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) | 0x02 ) ) ;
+
+    SR31 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) ;
+    CR63 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
+    SR01 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , ( UCHAR )( SR01 & 0xDF ) ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , ( UCHAR )( CR63 & 0xBF ) ) ;
+
+    CR17 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , ( UCHAR )( CR17 | 0x80 ) ) ;
+
+    SR1F = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR )( SR1F | 0x04 ) ) ;
+
+    SR07 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x07 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , ( UCHAR )( SR07 & 0xFB ) ) ;
+    SR06 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x06 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x06 , ( UCHAR )( SR06 & 0xC3 ) ) ;
+
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , 0x00 ) ;
+
+    for( i = 0 ; i < 8 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )i , CRTCData[ i ] ) ;
+
+    for( i = 8 ; i < 11 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 8 ) , CRTCData[ i ] ) ;
+
+    for( i = 11 ; i < 13 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 4 ) , CRTCData[ i ] ) ;
+
+    for( i = 13 ; i < 16 ; i++ )
+        XGINew_SetReg1( pVBInfo->P3c4 , ( USHORT )( i - 3 ) , CRTCData[ i ] ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , ( UCHAR )( CRTCData[ 16 ] & 0xE0 ) ) ;
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE1 ) ;
+
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < 256 ; i++ )
+    {
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 0 ] ) ;
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 1 ] ) ;
+        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 2 ] ) ;
+    }
+
+    XGI_VBLongWait( pVBInfo ) ;
+    XGI_VBLongWait( pVBInfo ) ;
+    XGI_VBLongWait( pVBInfo ) ;
+
+    XGINew_LCD_Wait_Time( 0x01 , pVBInfo ) ;
+
+    XGI_WaitDisply( pVBInfo ) ;
+    temp = XGINew_GetReg2( pVBInfo->P3c2 ) ;
+
+    if( temp & 0x10 )
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x20 ) ;
+    }
+    else
+    {
+        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , 0xDF , 0x00 ) ;
+    }
+
+    /* alan, avoid display something, set BLACK DAC if not restore DAC */
+    XGINew_SetReg3( pVBInfo->P3c8 , 0x00 ) ;
+
+    for( i = 0 ; i < 256 ; i++ )
+    {
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+      XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , 0 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , SR01 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , CR63 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , SR31 ) ;
+
+    /* [2004/05/11] Vicent */
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) & 0xFD ) ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR ) SR1F ) ;
+}
+
+
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : INT1AReturnCode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+int INT1AReturnCode( union REGS regs )
+{
+    if ( regs.x.cflag )
+    {
+        /* printf( "Error to find pci device!\n" ) ; */
+        return( 1 ) ;
+    }
+
+    switch(regs.h.ah)
+    {
+        case 0: return 0;
+            break ;
+        case 0x81:
+            printf( "Function not support\n" ) ;
+            break ;
+        case 0x83:
+            printf( "bad vendor id\n" ) ;
+            break ;
+        case 0x86:
+            printf( "device not found\n" ) ;
+            break ;
+        case 0x87:
+            printf( "bad register number\n" ) ;
+            break ;
+        case 0x88:
+            printf( "set failed\n" ) ;
+            break ;
+        case 0x89:
+            printf( "buffer too small" ) ;
+            break ;
+        default:
+            break ;
+    }
+    return( 1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : FindPCIIOBase */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+unsigned FindPCIIOBase( unsigned index , unsigned deviceid )
+{
+    union REGS regs ;
+
+    regs.h.ah = 0xb1 ;	/* PCI_FUNCTION_ID */
+    regs.h.al = 0x02 ;	/* FIND_PCI_DEVICE */
+    regs.x.cx = deviceid ;
+    regs.x.dx = 0x1039 ;
+    regs.x.si = index ;	/* find n-th device */
+
+    int86( 0x1A , &regs , &regs ) ;
+
+    if ( INT1AReturnCode( regs ) != 0 )
+        return( 0 ) ;
+
+    /* regs.h.bh bus number */
+    /* regs.h.bl device number */
+    regs.h.ah = 0xb1 ;  /* PCI_FUNCTION_ID */
+    regs.h.al = 0x09 ;  /* READ_CONFIG_WORD */
+    regs.x.cx = deviceid ;
+    regs.x.dx = 0x1039 ;
+    regs.x.di = 0x18 ;  /* register number */
+    int86( 0x1A , &regs , &regs ) ;
+
+    if ( INT1AReturnCode( regs ) != 0 )
+        return( 0 ) ;
+
+    return( regs.x.cx ) ;
+}
+
+#endif
+
+
+
+#ifdef TC
+/* --------------------------------------------------------------------- */
+/* Function : main */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void main(int argc, char *argv[])
+{
+    XGI_HW_DEVICE_INFO HwDeviceExtension ;
+    USHORT temp ;
+    USHORT ModeNo ;
+
+    /* HwDeviceExtension.pjVirtualRomBase =(PUCHAR) MK_FP(0xC000,0); */
+    /* HwDeviceExtension.pjVideoMemoryAddress = (PUCHAR)MK_FP(0xA000,0); */
+
+
+    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 ,0x6300 ) & 0xFF80 ) + 0x30 ;
+    HwDeviceExtension.jChipType = XGI_340 ;
+
+
+
+    /* HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x5315 ) & 0xFF80 ) + 0x30 ; */
+
+    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x330 ) & 0xFF80 ) + 0x30 ;
+    HwDeviceExtension.jChipType = XGI_340 ;
+
+
+    HwDeviceExtension.ujVBChipID = VB_CHIP_301 ;
+    StrCpy(HwDeviceExtension.szVBIOSVer , "0.84" ) ;
+    HwDeviceExtension.bSkipDramSizing = FALSE ;
+    HwDeviceExtension.ulVideoMemorySize = 0 ;
+
+    if ( argc == 2 )
+    {
+        ModeNo = atoi( argv[ 1 ] ) ;
+    }
+    else
+    {
+        ModeNo = 0x2e ;
+        /* ModeNo = 0x37 ; 1024x768x 4bpp */
+        /* ModeNo = 0x38 ; 1024x768x 8bpp */
+        /* ModeNo = 0x4A ; 1024x768x 16bpp */
+        /* ModeNo = 0x47 ; 800x600x 16bpp */
+    }
+
+    /* XGIInitNew( &HwDeviceExtension ) ; */
+    XGISetModeNew( &HwDeviceExtension , ModeNo ) ;
+}
+#endif
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_WaitDisplay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_WaitDisplay( PVB_DEVICE_INFO pVBInfo )
+{
+    while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ) ;
+
+    while( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Group301 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_SetCRT2Group301( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ,
+           ModeIdIndex ,
+           RefreshRateTableIndex ;
+
+    tempbx=pVBInfo->VBInfo ;
+    pVBInfo->SetFlag |= ProgrammingCRT2 ;
+    XGI_SearchModeID( ModeNo , &ModeIdIndex,  pVBInfo ) ;
+    pVBInfo->SelectCRT2Rate = 4 ;
+    RefreshRateTableIndex = XGI_GetRatePtrCRT2( HwDeviceExtension, ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_SaveCRT2Info( ModeNo, pVBInfo ) ;
+    XGI_GetCRT2ResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+    XGI_GetCRT2Data( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_PreSetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup1( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetLockRegs( ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup2(  ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetLCDRegs(ModeNo , ModeIdIndex , HwDeviceExtension , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetTap4Regs(pVBInfo) ;
+    XGI_SetGroup3(ModeNo, ModeIdIndex, pVBInfo);
+    XGI_SetGroup4( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    XGI_SetGroup5( ModeNo , ModeIdIndex, pVBInfo) ;
+    XGI_AutoThreshold( pVBInfo) ;
+    return 1 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_AutoThreshold */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_AutoThreshold(  PVB_DEVICE_INFO pVBInfo )
+{
+    if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
+      XGINew_SetRegOR( pVBInfo->Part1Port , 0x01 , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SaveCRT2Info */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SaveCRT2Info( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp1 ,
+           temp2 ;
+
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , ModeNo ) ;  /* reserve CR34 for CRT1 Mode No */
+    temp1 = ( pVBInfo->VBInfo&SetInSlaveMode ) >> 8 ;
+    temp2 = ~( SetInSlaveMode >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , temp2 , temp1 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2ResInfo */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2ResInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+     /* modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag; si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			/* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			/* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ;		/* si+St_ModeFlag */
+
+/*        if ( pVBInfo->IF_DEF_FSTN )
+        {
+            xres *= 2 ;
+            yres *= 2 ;
+        }
+        else
+        {
+*/
+            if ( modeflag & HalfDCLK )
+                xres *= 2;
+
+            if ( modeflag & DoubleScanMode )
+                yres *= 2 ;
+/* } */
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+    {
+        if ( pVBInfo->IF_DEF_LVDS == 0 )
+        {
+            if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+            {
+                if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+                {
+                    if ( yres == 1024 )
+                        yres = 1056 ;
+	        }
+            }
+
+            if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+            {
+	        if ( yres == 400 )
+	            yres = 405 ;
+	        else if ( yres == 350 )
+	            yres = 360 ;
+
+	        if ( pVBInfo->LCDInfo & LCDVESATiming )
+	        {
+	            if ( yres == 360 )
+	                yres = 375 ;
+	        }
+            }
+
+            if ( pVBInfo->LCDResInfo == Panel1024x768 )
+            {
+	        if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+	        {
+	            if ( !( pVBInfo->LCDInfo & LCDNonExpanding ) )
+	            {
+	                if ( yres == 350 )
+	                    yres = 357 ;
+	                else if ( yres == 400 )
+	                    yres = 420 ;
+	                else if ( yres == 480 )
+	                    yres = 525 ;
+	            }
+                }
+            }
+        }
+
+        if ( xres == 720 )
+            xres = 640 ;
+    }
+
+    pVBInfo->VGAHDE = xres ;
+    pVBInfo->HDE = xres ;
+    pVBInfo->VGAVDE = yres ;
+    pVBInfo->VDE = yres ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDDualLink */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDDualLink( PVB_DEVICE_INFO pVBInfo )
+{
+
+    if ( ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) ) && ( pVBInfo->LCDInfo & SetLCDDualLink ) ) /* shampoo0129 */
+        return ( 1 ) ;
+
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetCRT2Data */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax = 0,
+           tempbx ,
+           modeflag ,
+           resinfo ;
+
+    XGI_LCDDataStruct *LCDPtr = NULL ;
+    XGI_TVDataStruct  *TVPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;     /* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    pVBInfo->NewFlickerMode = 0 ;
+    pVBInfo->RVBHRS = 50 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+    {
+        XGI_GetRAMDAC2DATA( ModeNo , ModeIdIndex , RefreshRateTableIndex,pVBInfo ) ;
+        return ;
+    }
+
+    tempbx = 4 ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        LCDPtr = (XGI_LCDDataStruct* )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+        pVBInfo->RVBHCMAX = LCDPtr->RVBHCMAX ;
+        pVBInfo->RVBHCFACT = LCDPtr->RVBHCFACT ;
+        pVBInfo->VGAHT = LCDPtr->VGAHT ;
+        pVBInfo->VGAVT = LCDPtr->VGAVT ;
+        pVBInfo->HT = LCDPtr->LCDHT ;
+        pVBInfo->VT = LCDPtr->LCDVT ;
+
+        if ( pVBInfo->LCDResInfo == Panel1024x768 )
+        {
+            tempax = 1024 ;
+            tempbx = 768 ;
+
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+                if ( pVBInfo->VGAVDE == 357 )
+                    tempbx = 527 ;
+	        else if ( pVBInfo->VGAVDE == 420 )
+	            tempbx = 620 ;
+	        else if ( pVBInfo->VGAVDE == 525 )
+	            tempbx = 775 ;
+	        else if ( pVBInfo->VGAVDE == 600 )
+	            tempbx = 775 ;
+                /* else if(pVBInfo->VGAVDE==350) tempbx=560; */
+                /* else if(pVBInfo->VGAVDE==400) tempbx=640; */
+	        else
+	          tempbx = 768 ;
+            }
+            else
+                tempbx = 768 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1024x768x75 )
+        {
+            tempax = 1024 ;
+            tempbx = 768 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+        {
+            tempax = 1280 ;
+            if ( pVBInfo->VGAVDE == 360 )
+                tempbx = 768 ;
+            else if ( pVBInfo->VGAVDE == 375 )
+                tempbx = 800 ;
+            else if ( pVBInfo->VGAVDE == 405 )
+                tempbx = 864 ;
+            else
+                tempbx = 1024 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x1024x75 )
+        {
+            tempax = 1280 ;
+            tempbx = 1024 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1280x960 )
+        {
+            tempax = 1280 ;
+            if ( pVBInfo->VGAVDE == 350 )
+                tempbx = 700 ;
+            else if ( pVBInfo->VGAVDE == 400 )
+                tempbx = 800 ;
+            else if ( pVBInfo->VGAVDE == 1024 )
+                tempbx = 960 ;
+            else
+                tempbx = 960 ;
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1400x1050 )
+        {
+            tempax = 1400 ;
+            tempbx = 1050 ;
+
+            if ( pVBInfo->VGAVDE == 1024 )
+            {
+                tempax = 1280 ;
+                tempbx = 1024 ;
+            }
+        }
+        else if ( pVBInfo->LCDResInfo == Panel1600x1200 )
+        {
+            tempax = 1600 ;
+            tempbx = 1200 ;  /* alan 10/14/2003 */
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+              if ( pVBInfo->VGAVDE == 350 )
+                tempbx = 875 ;
+              else if ( pVBInfo->VGAVDE == 400 )
+                tempbx = 1000 ;
+            }
+        }
+
+        if ( pVBInfo->LCDInfo & LCDNonExpanding )
+        {
+            tempax = pVBInfo->VGAHDE ;
+            tempbx = pVBInfo->VGAVDE ;
+        }
+
+        pVBInfo->HDE = tempax ;
+        pVBInfo->VDE = tempbx ;
+        return ;
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToTV ) )
+    {
+        tempbx = 4 ;
+        TVPtr = ( XGI_TVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+
+        pVBInfo->RVBHCMAX = TVPtr->RVBHCMAX ;
+        pVBInfo->RVBHCFACT = TVPtr->RVBHCFACT ;
+        pVBInfo->VGAHT = TVPtr->VGAHT ;
+        pVBInfo->VGAVT = TVPtr->VGAVT ;
+        pVBInfo->HDE = TVPtr->TVHDE ;
+        pVBInfo->VDE = TVPtr->TVVDE ;
+        pVBInfo->RVBHRS = TVPtr->RVBHRS ;
+        pVBInfo->NewFlickerMode = TVPtr->FlickerMode ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {
+            if ( resinfo == 0x08 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+            else if ( resinfo == 0x09 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+            else if ( resinfo == 0x12 )
+                pVBInfo->NewFlickerMode = 0x40 ;
+
+            if ( pVBInfo->VGAVDE == 350 )
+                pVBInfo->TVInfo |= TVSimuMode ;
+
+            tempax = ExtHiTVHT ;
+            tempbx = ExtHiTVVT ;
+
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+	        if ( pVBInfo->TVInfo & TVSimuMode )
+	        {
+	            tempax = StHiTVHT ;
+	            tempbx = StHiTVVT ;
+
+	            if ( !( modeflag & Charx8Dot ) )
+	            {
+	                tempax = StHiTextTVHT ;
+	                tempbx = StHiTextTVVT ;
+	            }
+	        }
+            }
+        }
+        else if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            {
+                tempax = YPbPrTV750pHT ;	/* Ext750pTVHT */
+                tempbx = YPbPrTV750pVT ;	/* Ext750pTVVT */
+            }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            {
+                tempax = YPbPrTV525pHT ;	/* Ext525pTVHT */
+                tempbx = YPbPrTV525pVT ;	/* Ext525pTVVT */
+            }
+            else if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            {
+                tempax = YPbPrTV525iHT ;	/* Ext525iTVHT */
+                tempbx = YPbPrTV525iVT ;	/* Ext525iTVVT */
+                if ( pVBInfo->TVInfo & NTSC1024x768 )
+                    tempax = NTSC1024x768HT ;
+            }
+        }
+        else
+        {
+            tempax = PALHT ;
+            tempbx = PALVT ;
+            if ( !( pVBInfo->TVInfo & SetPALTV ) )
+            {
+                tempax = NTSCHT ;
+	        tempbx = NTSCVT ;
+	        if ( pVBInfo->TVInfo & NTSC1024x768 )
+	            tempax = NTSC1024x768HT ;
+            }
+        }
+
+        pVBInfo->HT = tempax ;
+        pVBInfo->VT = tempbx ;
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2VCLK */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2VCLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR di_0 ,
+          di_1 ,
+          tempal ;
+
+    tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
+    XGI_GetVCLKLen( tempal, &di_0 , &di_1, pVBInfo ) ;
+    XGI_GetLCDVCLKPtr( &di_0 , &di_1, pVBInfo ) ;
+
+    if ( pVBInfo->VBType & VB_XGI301 ) /* shampoo 0129 */
+    {				/* 301 */
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , 0x10 ) ;
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0B , di_1 ) ;
+        XGINew_SetReg1(pVBInfo->Part4Port , 0x0A , di_0 ) ;
+    }
+    else
+    {				/* 301b/302b/301lv/302lv */
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0A , di_0 ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0B , di_1 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x00 , 0x12 ) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x28 ) ;
+    else
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x12 , 0x08 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GETLCDVCLKPtr */
+/* Input : */
+/* Output : al -> VCLK Index */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDVCLKPtr( UCHAR* di_0 , UCHAR *di_1, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        if ( pVBInfo->IF_DEF_ScaleLCD == 1 )
+        {
+            if ( pVBInfo->LCDInfo & EnableScalingLCD )
+                return ;
+        }
+
+        /* index = XGI_GetLCDCapPtr(pVBInfo) ; */
+        index = XGI_GetLCDCapPtr1( pVBInfo) ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {	/* LCDB */
+            *di_0 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData1 ;
+            *di_1 = pVBInfo->LCDCapList[ index ].LCUCHAR_VCLKData2 ;
+        }
+        else
+        {	/* LCDA */
+            *di_0 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData1 ;
+            *di_1 = pVBInfo->LCDCapList[ index ].LCDA_VCLKData2 ;
+        }
+    }
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+
+    USHORT index ,
+           modeflag ;
+#ifndef LINUX_XF86
+    USHORT tempbx ;
+#endif
+
+    UCHAR tempal ;
+    UCHAR *CHTVVCLKPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+    else
+        modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;    /* si+Ext_ResInfo */
+
+
+    if ( ( pVBInfo->SetFlag & ProgrammingCRT2 ) && ( !( pVBInfo->LCDInfo & EnableScalingLCD ) ) )
+    {   /* {LCDA/LCDB} */
+        index = XGI_GetLCDCapPtr(pVBInfo) ;
+        tempal = pVBInfo->LCDCapList[ index ].LCD_VCLK ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            return tempal ;
+
+	/* {TV} */
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV| VB_XGI302LV| VB_XGI301C ) )
+        {
+            if(pVBInfo->VBInfo&SetCRT2ToHiVisionTV)
+           {
+                tempal = HiTVVCLKDIV2;
+                if(!(pVBInfo->TVInfo & RPLLDIV2XO))
+                    tempal = HiTVVCLK;
+	        if(pVBInfo->TVInfo & TVSimuMode)
+                {
+                    tempal = HiTVSimuVCLK;
+                    if(!(modeflag & Charx8Dot))
+              	        tempal = HiTVTextVCLK;
+
+                 }
+                 return tempal;
+             }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            {
+                tempal = YPbPr750pVCLK ;
+                return tempal ;
+            }
+
+            if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            {
+                tempal = YPbPr525pVCLK ;
+                return tempal ;
+            }
+
+            tempal = NTSC1024VCLK ;
+
+            if ( !( pVBInfo->TVInfo & NTSC1024x768 ) )
+            {
+                tempal = TVVCLKDIV2 ;
+                if ( !( pVBInfo->TVInfo & RPLLDIV2XO ) )
+                    tempal = TVVCLK ;
+            }
+
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                return tempal ;
+        }
+        /*else
+        if((pVBInfo->IF_DEF_CH7017==1)&&(pVBInfo->VBType&VB_CH7017))
+        {
+            if(ModeNo<=0x13)
+                *tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
+            else
+                *tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+            *tempal = *tempal & 0x1F;
+
+            tempbx = 0;
+            if(pVBInfo->TVInfo & SetPALTV)
+                tempbx = tempbx + 2;
+            if(pVBInfo->TVInfo & SetCHTVOverScan)
+                tempbx++;
+            tempbx = tempbx << 1;
+        }  */
+    }	/* {End of VB} */
+
+    if((pVBInfo->IF_DEF_CH7007==1)&&(pVBInfo->VBType&VB_CH7007)) /* [Billy] 07/05/08 CH7007 */
+    {
+       /* VideoDebugPrint((0, "XGI_GetVCLKPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+       if ( (pVBInfo->VBInfo & SetCRT2ToTV) )
+       {
+           if( ModeNo <= 0x13 )
+           {
+              tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+           }
+           else
+           {
+              tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
+           }
+
+           tempal = tempal & 0x0F;
+           tempbx = 0;
+
+           if(pVBInfo->TVInfo & SetPALTV)
+           {
+              tempbx = tempbx + 2;
+           }
+           if(pVBInfo->TVInfo & SetCHTVOverScan)
+           {
+              tempbx++;
+           }
+           /** tempbx = tempbx << 1; CH7007 ? **/
+
+/*[Billy]07/05/29 CH7007*/
+           if ( pVBInfo->IF_DEF_CH7007 == 1 )
+           {
+             switch( tempbx )
+             {
+               case 0:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKUNTSC ;
+                   break ;
+               case 1:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKONTSC ;
+                   break ;
+               case 2:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKUPAL ;
+                   break ;
+               case 3:
+                   CHTVVCLKPtr = XGI7007_CHTVVCLKOPAL ;
+                   break ;
+               default:
+                   break ;
+
+             }
+           }
+           /*else
+           {
+            switch( tempbx )
+            {
+               case 0:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+                   break ;
+               case 1:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+                   break ;
+               case 2:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+                   break ;
+               case 3:
+                   CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+                   break ;
+               default:
+                   break ;
+            }
+           }*/
+
+           tempal = CHTVVCLKPtr[ tempal ] ;
+           return tempal ;
+       }
+
+    }
+
+    tempal = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;
+    tempal = tempal >> 2 ;
+    tempal &= 0x03 ;
+
+    if ( ( pVBInfo->LCDInfo & EnableScalingLCD ) && ( modeflag & Charx8Dot ) )  /* for Dot8 Scaling LCD */
+        tempal = tempal ^ tempal ;                   /* ; set to VCLK25MHz always */
+
+    if ( ModeNo <= 0x13 )
+        return tempal ;
+
+    tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;
+    return tempal ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLKLen */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 2007/05/16 */
+    {
+       /* VideoDebugPrint((0, "XGI_GetVCLKLen: pVBInfo->IF_DEF_CH7007==1\n")); */
+        *di_0 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2B ;
+        *di_1 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2C ;
+    }
+    else if ( pVBInfo->VBType & ( VB_XGI301 | VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
+        {
+            *di_0 = ( UCHAR )XGI_VBVCLKData[ tempal ].SR2B ;
+            *di_1 = XGI_VBVCLKData[ tempal ].SR2C ;
+        }
+    }
+    else
+    {
+        *di_0 = XGI_VCLKData[ tempal ].SR2B ;
+        *di_1 = XGI_VCLKData[ tempal ].SR2C ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2Offset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2Offset( USHORT ModeNo ,
+				   USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT offset ;
+    UCHAR temp ;
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+    {
+        return ;
+    }
+
+    offset = XGI_GetOffset(  ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    temp = ( UCHAR )( offset & 0xFF ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;
+    temp =( UCHAR)( ( offset & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , temp ) ;
+    temp =( UCHAR )( ( ( offset >> 3 ) & 0xFF ) + 1 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetOffset */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ,
+           colordepth ,
+           modeinfo ,
+           index ,
+           infoflag ,
+           ColorDepth[] = { 0x01 , 0x02 , 0x04 } ;
+
+    modeinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeInfo ;
+    if ( ModeNo <= 0x14 )
+        infoflag = 0 ;
+    else
+        infoflag = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag ;
+
+
+    index = ( modeinfo >> 8 ) & 0xFF ;
+
+    temp = pVBInfo->ScreenOffset[ index ] ;
+
+    if ( infoflag & InterlaceMode )
+    {
+        temp = temp << 1 ;
+    }
+
+    colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+
+    if ( ( ModeNo >= 0x7C ) && ( ModeNo <= 0x7E ) )
+    {
+        temp = ModeNo - 0x7C ;
+	colordepth = ColorDepth[ temp ] ;
+	temp = 0x6B ;
+	if ( infoflag & InterlaceMode )
+	{
+            temp = temp << 1 ;
+	}
+	return( temp * colordepth ) ;
+    }
+    else
+        return( temp * colordepth ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2FIFO */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2FIFO( PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x01 , 0x3B ) ;			/* threshold high ,disable auto threshold */
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x02 , ~( 0x3F ) , 0x04 ) ;	/* threshold low default 04h */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_PreSetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_PreSetGroup1(USHORT ModeNo , USHORT ModeIdIndex ,PXGI_HW_DEVICE_INFO HwDeviceExtension,
+                       USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempcx = 0 ,
+           CRT1Index = 0 ,
+           resinfo = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    XGI_SetCRT2Offset( ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
+    XGI_SetCRT2FIFO(pVBInfo) ;
+    /* XGI_SetCRT2Sync(ModeNo,RefreshRateTableIndex); */
+
+    for( tempcx = 4 ; tempcx < 7 ; tempcx++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part1Port , tempcx , 0x0 ) ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x50 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , 0x44 ) ;	/* temp 0206 */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup1( USHORT ModeNo , USHORT ModeIdIndex ,
+                            PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT temp = 0 ,
+           tempax = 0 ,
+           tempbx = 0 ,
+           tempcx = 0 ,
+           pushbx = 0 ,
+           CRT1Index = 0 ,
+           modeflag ,
+           resinfo = 0 ;
+
+    if ( ModeNo > 0x13 )
+    {
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+    }
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    /* bainy change table name */
+    if ( modeflag & HalfDCLK )
+    {
+        temp = ( pVBInfo->VGAHT / 2 - 1 ) & 0x0FF ;			/* BTVGA2HT 0x08,0x09 */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+        temp = ( ( ( pVBInfo->VGAHT / 2 - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+        temp = ( pVBInfo->VGAHDE / 2 + 16 ) & 0x0FF ;			/* BTVGA2HDEE 0x0A,0x0C */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+        tempcx = ( ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) / 2 ) >> 2 ;
+        pushbx = pVBInfo->VGAHDE / 2 + 16 ;
+        tempcx = tempcx >> 1 ;
+        tempbx = pushbx + tempcx ;					/* bx BTVGA@HRS 0x0B,0x0C */
+        tempcx += tempbx ;
+
+  	if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+  	{
+            tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+            tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] & 0xC0 ) << 2 ) ;
+            tempbx = ( tempbx - 3 ) << 3 ;				/* (VGAHRS-3)*8 */
+            tempcx = pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[ 5 ] ;
+            tempcx &= 0x1F ;
+            temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 15 ] ;
+            temp = ( temp & 0x04 ) << ( 5 - 2 ) ;			/* VGAHRE D[5] */
+            tempcx = ( ( tempcx | temp ) - 3 ) << 3 ;			/* (VGAHRE-3)*8 */
+        }
+
+        tempbx += 4 ;
+        tempcx += 4 ;
+
+        if ( tempcx > ( pVBInfo->VGAHT / 2 ) )
+            tempcx = pVBInfo->VGAHT / 2 ;
+
+        temp = tempbx & 0x00FF ;
+
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+    }
+    else
+    {
+        temp = ( pVBInfo->VGAHT - 1 ) & 0x0FF ;				/* BTVGA2HT 0x08,0x09 */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , temp ) ;
+        temp = ( ( ( pVBInfo->VGAHT - 1 ) & 0xFF00 ) >> 8 ) << 4 ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x09 , ~0x0F0 , temp ) ;
+        temp = ( pVBInfo->VGAHDE + 16 ) & 0x0FF ;				/* BTVGA2HDEE 0x0A,0x0C */
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;
+        tempcx = ( pVBInfo->VGAHT - pVBInfo->VGAHDE ) >> 2 ;		/* cx */
+        pushbx = pVBInfo->VGAHDE + 16 ;
+        tempcx = tempcx >> 1 ;
+        tempbx = pushbx + tempcx ;					/* bx BTVGA@HRS 0x0B,0x0C */
+        tempcx += tempbx ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+        {
+            tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 3 ] ;
+            tempbx |= ( ( pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] & 0xC0 ) << 2 ) ;
+            tempbx = ( tempbx - 3 ) << 3 ;				/* (VGAHRS-3)*8 */
+            tempcx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 4 ] ;
+            tempcx &= 0x1F ;
+            temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 6 ] ;
+            temp = ( temp & 0x04 ) << ( 5 - 2 ) ;			/* VGAHRE D[5] */
+            tempcx = ( ( tempcx | temp ) - 3 ) << 3 ;			/* (VGAHRE-3)*8 */
+            tempbx += 16 ;
+            tempcx += 16 ;
+        }
+
+        if ( tempcx > pVBInfo->VGAHT )
+            tempcx = pVBInfo->VGAHT ;
+
+        temp = tempbx & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+    }
+
+    tempax = ( tempax & 0x00FF ) | ( tempbx & 0xFF00 ) ;
+    tempbx = pushbx ;
+    tempbx = ( tempbx & 0x00FF ) | ( ( tempbx & 0xFF00 ) << 4 ) ;
+    tempax |= ( tempbx & 0xFF00 ) ;
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ;
+    tempcx = ( pVBInfo->VGAVT - 1 ) ;
+    temp = tempcx & 0x00FF ;
+
+    if ( pVBInfo->IF_DEF_CH7005 == 1 )
+    {
+        if ( pVBInfo->VBInfo & 0x0C )
+        {
+            temp-- ;
+	}
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+    tempbx = pVBInfo->VGAVDE - 1 ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) << 3 ) >> 8 ;
+    temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , temp ) ;
+
+    tempax = pVBInfo->VGAVDE ;
+    tempbx = pVBInfo->VGAVDE ;
+    tempcx = pVBInfo->VGAVT ;
+    tempbx = ( pVBInfo->VGAVT + pVBInfo->VGAVDE ) >> 1 ;				/* BTVGA2VRS 0x10,0x11 */
+    tempcx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) >> 4 ) + tempbx + 1 ;		/* BTVGA2VRE 0x11 */
+
+    if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+    {
+        tempbx = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 10 ] ;
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+
+        if ( temp & 0x04 )
+            tempbx |= 0x0100 ;
+
+        if ( temp & 0x080 )
+            tempbx |= 0x0200 ;
+
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] ;
+
+        if ( temp & 0x08 )
+            tempbx |= 0x0400 ;
+
+        temp = pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 11 ] ;
+        tempcx = ( tempcx & 0xFF00 ) | ( temp & 0x00FF ) ;
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+    temp = ( ( tempcx & 0x000F ) | ( temp ) ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , temp ) ;
+    tempax = 0 ;
+
+    if ( modeflag & DoubleScanMode )
+        tempax |= 0x80 ;
+
+    if ( modeflag & HalfDCLK )
+        tempax |= 0x40 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2C , ~0x0C0 , tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLockRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void  XGI_SetLockRegs( USHORT ModeNo , USHORT ModeIdIndex ,
+                                PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT push1 ,
+           push2 ,
+           tempax ,
+           tempbx = 0 ,
+           tempcx ,
+           temp ,
+           resinfo ,
+           modeflag ,
+           CRT1Index ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask;
+    }
+
+    if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+    {
+        return ;
+    }
+
+    temp = 0xFF ;							/* set MAX HT */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+    /* if ( modeflag & Charx8Dot ) tempcx = 0x08 ; */
+    /* else */
+    tempcx=0x08;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        modeflag |= Charx8Dot ;
+
+    tempax = pVBInfo->VGAHDE ;						/* 0x04 Horizontal Display End */
+
+    if ( modeflag & HalfDCLK )
+        tempax = tempax >> 1 ;
+
+    tempax = ( tempax / tempcx ) - 1 ;
+    tempbx |= ( ( tempax & 0x00FF ) << 8 ) ;
+    temp = tempax & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x04 , temp ) ;
+
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( !( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) ) )
+            temp += 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        {
+            if ( pVBInfo->VBType & VB_XGI301LV )
+            {
+                if ( pVBInfo->VBExtInfo == VB_YPbPr1080i )
+                {
+                    if ( resinfo == 7 )
+                        temp -= 2 ;
+                }
+            }
+            else
+                if ( resinfo == 7 )
+                    temp -= 2 ;
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x05 , temp ) ;			/* 0x05 Horizontal Display Start */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x06 , 0x03 ) ;			/* 0x06 Horizontal Blank end */
+
+    if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+    {                            					/* 030226 bainy */
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            tempax = pVBInfo->VGAHT ;
+        else
+            tempax = XGI_GetVGAHT2( pVBInfo) ;
+    }
+
+    if ( tempax >= pVBInfo->VGAHT )
+    {
+        tempax = pVBInfo->VGAHT ;
+    }
+
+    if ( modeflag & HalfDCLK )
+    {
+        tempax = tempax >> 1 ;
+    }
+
+    tempax = ( tempax / tempcx ) - 5 ;
+    tempcx = tempax ;				/* 20030401 0x07 horizontal Retrace Start */
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        temp = ( tempbx & 0x00FF ) - 1 ;
+        if ( !( modeflag & HalfDCLK ) )
+        {
+            temp -= 6 ;
+            if ( pVBInfo->TVInfo & TVSimuMode )
+            {
+                temp -= 4 ;
+                if ( ModeNo > 0x13 )
+                    temp -= 10 ;
+            }
+        }
+    }
+    else
+    {
+        /* tempcx = tempbx & 0x00FF ; */
+        tempbx = ( tempbx & 0xFF00 ) >> 8 ;
+        tempcx = ( tempcx + tempbx ) >> 1 ;
+        temp = ( tempcx & 0x00FF ) + 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            temp -= 1 ;
+            if ( !( modeflag & HalfDCLK ) )
+            {
+                if ( ( modeflag & Charx8Dot ) )
+                {
+                    temp += 4 ;
+                    if ( pVBInfo->VGAHDE >= 800 )
+                    {
+                        temp -= 6 ;
+                    }
+                }
+            }
+        }
+        else
+        {
+            if ( !( modeflag & HalfDCLK ) )
+            {
+                temp -= 4 ;
+                if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                {
+                    if( pVBInfo->VGAHDE >= 800 )
+                    {
+                        temp -= 7 ;
+                        if ( pVBInfo->ModeType == ModeEGA )
+                        {
+                            if ( pVBInfo->VGAVDE == 1024 )
+                            {
+                                temp += 15 ;
+                                if ( pVBInfo->LCDResInfo != Panel1280x1024 )
+                                {
+                                    temp += 7 ;
+                                }
+                            }
+                        }
+
+                        if ( pVBInfo->VGAHDE >= 1280 )
+                        {
+                            if ( pVBInfo->LCDResInfo != Panel1280x960 )
+                            {
+                                if ( pVBInfo->LCDInfo & LCDNonExpanding )
+                                {
+                                    temp += 28 ;
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;		/* 0x07 Horizontal Retrace Start */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0 ) ;		/* 0x08 Horizontal Retrace End */
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( pVBInfo->TVInfo & TVSimuMode )
+        {
+            if ( ( ModeNo == 0x06 ) || ( ModeNo == 0x10 ) || ( ModeNo == 0x11 ) || ( ModeNo == 0x13 ) || ( ModeNo == 0x0F ) )
+            {
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x5b ) ;
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+            }
+
+            if ( ( ModeNo == 0x00 ) || ( ModeNo == 0x01 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x61 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2A ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x41 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+                }
+            }
+
+            if ( ( ModeNo == 0x02 ) || ( ModeNo == 0x03 ) || ( ModeNo == 0x07 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x54 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x55 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x00 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , 0xF0 ) ;
+                }
+            }
+
+            if ( ( ModeNo == 0x04 ) || ( ModeNo == 0x05 ) || ( ModeNo == 0x0D ) || ( ModeNo == 0x50 ) )
+            {
+                if ( pVBInfo->TVInfo & SetNTSCTV )
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x30 ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x03 ) ;
+                }
+                else
+                {
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , 0x2f ) ;
+                    XGINew_SetReg1( pVBInfo->Part1Port , 0x08 , 0x02 ) ;
+                }
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , 0x03 ) ;				/* 0x18 SR0B */
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0xF0 , 0x00 ) ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , 0xFF ) ;				/* 0x09 Set Max VT */
+
+    tempbx = pVBInfo->VGAVT ;
+    push1 = tempbx ;
+    tempcx = 0x121 ;
+    tempbx = pVBInfo->VGAVDE ;							/* 0x0E Virtical Display End */
+
+    if ( tempbx == 357 )
+        tempbx = 350 ;
+    if ( tempbx == 360 )
+        tempbx =350 ;
+    if ( tempbx == 375 )
+        tempbx = 350 ;
+    if ( tempbx == 405 )
+        tempbx = 400 ;
+    if ( tempbx == 525 )
+        tempbx = 480 ;
+
+    push2 = tempbx ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+    {
+        if ( pVBInfo->LCDResInfo == Panel1024x768 )
+        {
+            if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+            {
+                if ( tempbx == 350 )
+                    tempbx += 5 ;
+		if ( tempbx == 480 )
+		    tempbx += 5 ;
+            }
+        }
+    }
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 ,temp ) ;				/* 0x10 vertical Blank Start */
+    tempbx = push2 ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0E , temp ) ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0002 ;
+    }
+
+    tempax = 0x000B ;
+
+    if ( modeflag & DoubleScanMode )
+    {
+        tempax |= 0x08000 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        tempcx |= 0x0040 ;
+    }
+
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0B , temp ) ;
+
+    if ( tempbx & 0x0400 )
+    {
+        tempcx |= 0x0600 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x11 , 0x00 ) ;				/* 0x11 Vertival Blank End */
+
+    tempax = push1 ;
+    tempax -= tempbx ;								/* 0x0C Vertical Retrace Start */
+    tempax = tempax >> 2 ;
+    push1 = tempax ;								/* push ax */
+
+    if ( resinfo != 0x09 )
+    {
+        tempax = tempax << 1 ;
+        tempbx += tempax ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+                tempbx -= 10 ;
+            else
+            {
+                if ( pVBInfo->TVInfo & TVSimuMode )
+                {
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                    {
+                        if ( pVBInfo->VBType & VB_XGI301LV )
+                        {
+                            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                                tempbx += 40 ;
+                        }
+                        else
+                            tempbx += 40 ;
+                    }
+                }
+            }
+        }
+        else
+            tempbx -= 10 ;
+    }
+    else
+    {
+        if ( pVBInfo->TVInfo & TVSimuMode )
+        {
+            if ( pVBInfo->TVInfo & SetPALTV )
+            {
+                if ( pVBInfo->VBType & VB_XGI301LV )
+                {
+                    if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                        tempbx += 40 ;
+                }
+                else
+                    tempbx += 40 ;
+            }
+        }
+    }
+    tempax = push1 ;
+    tempax = tempax >> 2 ;
+    tempax++ ;
+    tempax += tempbx ;
+    push1 = tempax ;						/* push ax */
+
+    if ( ( pVBInfo->TVInfo & SetPALTV ) )
+    {
+        if ( tempbx <= 513 )
+        {
+            if ( tempax >= 513 )
+            {
+                tempbx = 513 ;
+            }
+        }
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0C , temp ) ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x10 , temp ) ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0008 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x0B , 0x0FF , 0x20 ) ;
+    }
+
+    tempbx++ ;
+
+    if ( tempbx & 0x0100 )
+    {
+        tempcx |= 0x0004 ;
+    }
+
+    if ( tempbx & 0x0200 )
+    {
+        tempcx |= 0x0080 ;
+    }
+
+    if ( tempbx & 0x0400 )
+    {
+        tempcx |= 0x0C00 ;
+    }
+
+    tempbx = push1 ;						/* pop ax */
+    temp = tempbx & 0x00FF ;
+    temp &= 0x0F ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0D , temp ) ;		/* 0x0D vertical Retrace End */
+
+    if ( tempbx & 0x0010 )
+    {
+        tempcx |= 0x2000 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0A , temp ) ;		/* 0x0A CR07 */
+    temp = ( tempcx & 0x0FF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , temp ) ;		/* 0x17 SR0A */
+    tempax = modeflag ;
+    temp = ( tempax & 0xFF00 ) >> 8 ;
+
+    temp = ( temp >> 1 ) & 0x09 ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        temp |= 0x01 ;
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , temp ) ;			/* 0x16 SR01 */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x0F , 0 ) ;			/* 0x0F CR14 */
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x12 , 0 ) ;			/* 0x12 CR17 */
+
+    if ( pVBInfo->LCDInfo & LCDRGB18Bit )
+        temp = 0x80 ;
+    else
+        temp = 0x00 ;
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x1A , temp ) ;			/* 0x1A SR0E */
+
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex,
+                    PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i ,
+           j ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           push1 ,
+           push2 ,
+           modeflag ,
+           resinfo ,
+           crt2crtc ;
+    UCHAR *TimingPoint ;
+
+    ULONG longtemp ,
+          tempeax ,
+          tempebx ,
+          temp2 ,
+          tempecx ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;		/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+        crt2crtc = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;		/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        crt2crtc = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempax = 0 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToAVIDEO ) )
+        tempax |= 0x0800 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+        tempax |= 0x0400 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToSCART )
+        tempax |= 0x0200 ;
+
+    if ( !( pVBInfo->TVInfo & SetPALTV ) )
+        tempax |= 0x1000 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        tempax |= 0x0100 ;
+
+    if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+        tempax &= 0xfe00 ;
+
+    tempax = ( tempax & 0xff00 ) >> 8 ;
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x0 , tempax ) ;
+    TimingPoint = pVBInfo->NTSCTiming ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+    {
+        TimingPoint = pVBInfo->PALTiming ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        TimingPoint = pVBInfo->HiTVExtTiming ;
+
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+            TimingPoint = pVBInfo->HiTVSt2Timing ;
+
+        if ( pVBInfo->SetFlag & TVSimuMode )
+            TimingPoint = pVBInfo->HiTVSt1Timing ;
+
+        if ( !(modeflag & Charx8Dot) )
+            TimingPoint = pVBInfo->HiTVTextTiming ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            TimingPoint = pVBInfo->YPbPr525iTiming ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+    	    TimingPoint = pVBInfo->YPbPr525pTiming ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+    	    TimingPoint = pVBInfo->YPbPr750pTiming ;
+    }
+
+    for( i = 0x01 , j = 0 ; i <= 0x2D ; i++ , j++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+    }
+
+    for( i = 0x39 ; i <= 0x45 ; i++ , j++ )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;	/* di->temp2[j] */
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , 0x00 ) ;
+    }
+
+    temp = pVBInfo->NewFlickerMode ;
+    temp &= 0x80 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xFF , temp ) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        tempax = 950 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        tempax = 520 ;
+    else
+        tempax = 440 ;
+
+    if ( pVBInfo->VDE <= tempax )
+    {
+        tempax -= pVBInfo->VDE ;
+        tempax = tempax >> 2 ;
+        tempax = ( tempax & 0x00FF ) | ( ( tempax & 0x00FF ) << 8 ) ;
+        push1 = tempax ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp += ( USHORT )TimingPoint[ 0 ] ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) )
+            {
+                tempcx=pVBInfo->VGAHDE;
+                if ( tempcx >= 1024 )
+                {
+                    temp = 0x17 ;		/* NTSC */
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                        temp = 0x19 ;		/* PAL */
+                }
+            }
+        }
+
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+        tempax = push1 ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp += TimingPoint[ 1 ] ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( ( pVBInfo->VBInfo & ( SetCRT2ToAVIDEO | SetCRT2ToSVIDEO | SetCRT2ToSCART | SetCRT2ToYPbPr ) ) )
+            {
+                tempcx = pVBInfo->VGAHDE ;
+                if ( tempcx >= 1024 )
+                {
+                    temp = 0x1D ;		/* NTSC */
+                    if ( pVBInfo->TVInfo & SetPALTV )
+                        temp = 0x52 ;		/* PAL */
+                }
+            }
+        }
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , temp ) ;
+    }
+
+    /* 301b */
+    tempcx = pVBInfo->HT ;
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempcx = tempcx >> 1 ;
+
+    tempcx -= 2 ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1B , temp ) ;
+
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F , temp ) ;
+
+    tempcx = pVBInfo->HT >> 1 ;
+    push1 = tempcx ;				/* push cx */
+    tempcx += 7 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempcx -= 4 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x22 , 0x0F , temp ) ;
+
+    tempbx = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+    tempbx += tempcx ;
+    push2 = tempbx ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x24 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR(pVBInfo->Part2Port,0x25,0x0F,temp);
+
+    tempbx=push2;
+    tempbx=tempbx+8;
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempbx=tempbx-4;
+        tempcx=tempbx;
+    }
+
+    temp = ( tempbx & 0x00FF ) << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x29 , 0x0F , temp ) ;
+
+    j += 2 ;
+    tempcx += ( TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x27 , temp ) ;
+    temp = ( ( tempcx & 0xFF00 ) >> 8 ) << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x28 , 0x0F , temp ) ;
+
+    tempcx += 8 ;
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        tempcx -= 4 ;
+    }
+
+    temp = tempcx & 0xFF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2A , 0x0F , temp ) ;
+
+    tempcx = push1 ;					/* pop cx */
+    j += 2 ;
+    temp = TimingPoint[ j ] | ( ( TimingPoint[ j + 1 ] ) << 8 ) ;
+    tempcx -= temp ;
+    temp = tempcx & 0x00FF ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2D , 0x0F ,temp ) ;
+
+    tempcx -= 11 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        tempax = XGI_GetVGAHT2( pVBInfo) ;
+        tempcx = tempax - 1 ;
+    }
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2E , temp ) ;
+
+    tempbx = pVBInfo->VDE ;
+
+    if ( pVBInfo->VGAVDE == 360 )
+        tempbx = 746 ;
+    if ( pVBInfo->VGAVDE == 375 )
+        tempbx = 746 ;
+    if ( pVBInfo->VGAVDE == 405 )
+        tempbx = 853 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+                tempbx = tempbx >> 1 ;
+        }
+        else
+            tempbx = tempbx >> 1 ;
+    }
+
+    tempbx -= 2 ;
+    temp = tempbx & 0x00FF ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+            {
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( ModeNo == 0x2f )
+                        temp += 1 ;
+                }
+            }
+        }
+        else
+        {
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+            {
+                if ( ModeNo == 0x2f )
+                    temp += 1 ;
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2F , temp ) ;
+
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    temp |= ( ( tempbx & 0xFF00 ) >> 8 ) << 6 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) )
+    {
+        if ( pVBInfo->VBType & VB_XGI301LV )
+        {
+            if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+            {
+                temp |= 0x10 ;
+
+                if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+                    temp |= 0x20 ;
+            }
+        }
+        else
+        {
+            temp |= 0x10 ;
+            if ( !( pVBInfo->VBInfo & SetCRT2ToSVIDEO ) )
+                temp |= 0x20 ;
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , temp ) ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )	/* TV gatingno */
+    {
+        tempbx = pVBInfo->VDE ;
+        tempcx = tempbx - 2 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+                tempbx = tempbx >> 1 ;
+        }
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            temp=0;
+            if( tempcx & 0x0400 )
+                temp |= 0x20 ;
+
+            if ( tempbx & 0x0400 )
+                temp |= 0x40 ;
+
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x10 , temp ) ;
+        }
+
+        temp = ( ( ( tempbx - 3 ) & 0x0300 ) >> 8 ) << 5 ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x46 , temp ) ;
+        temp = ( tempbx - 3 ) & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x47 , temp ) ;
+    }
+
+    tempbx = tempbx & 0x00FF ;
+
+    if ( !( modeflag & HalfDCLK ) )
+    {
+        tempcx = pVBInfo->VGAHDE ;
+        if ( tempcx >= pVBInfo->HDE )
+        {
+            tempbx |= 0x2000 ;
+            tempax &= 0x00FF ;
+        }
+    }
+
+    tempcx = 0x0101 ;
+
+    if( pVBInfo->VBInfo & SetCRT2ToTV ) { /*301b*/
+        if(pVBInfo->VGAHDE>=1024)
+        {
+	    tempcx=0x1920;
+            if(pVBInfo->VGAHDE>=1280)
+            {
+	        tempcx=0x1420;
+	        tempbx=tempbx&0xDFFF;
+            }
+        }
+    }
+
+    if ( !( tempbx & 0x2000 ) )
+    {
+        if ( modeflag & HalfDCLK )
+        {
+            tempcx = ( tempcx & 0xFF00 ) | ( ( tempcx & 0x00FF ) << 1 ) ;
+	}
+
+        push1 = tempbx ;
+        tempeax = pVBInfo->VGAHDE ;
+        tempebx = ( tempcx & 0xFF00 ) >> 8 ;
+        longtemp = tempeax * tempebx ;
+        tempecx = tempcx & 0x00FF ;
+        longtemp = longtemp / tempecx ;
+
+	/* 301b */
+        tempecx = 8 * 1024 ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempecx = tempecx * 8 ;
+        }
+
+        longtemp = longtemp * tempecx ;
+        tempecx = pVBInfo->HDE ;
+        temp2 = longtemp % tempecx ;
+        tempeax = longtemp / tempecx ;
+        if ( temp2 != 0 )
+        {
+            tempeax += 1 ;
+        }
+
+        tempax = ( USHORT )tempeax ;
+
+	/* 301b */
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempcx = ( ( tempax & 0xFF00 ) >> 5 ) >> 8 ;
+        }
+        /* end 301b */
+
+        tempbx = push1 ;
+        tempbx =( USHORT )( ( ( tempeax & 0x0000FF00 ) & 0x1F00 ) | ( tempbx & 0x00FF ) ) ;
+        tempax =( USHORT )( ( ( tempeax & 0x000000FF ) << 8 ) | ( tempax & 0x00FF ) ) ;
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+    }
+    else
+    {
+        temp = ( tempax & 0x00FF ) >> 8 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x44 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x45 , ~0x03F , temp ) ;
+    temp = tempcx & 0x00FF ;
+
+    if ( tempbx & 0x2000 )
+        temp = 0 ;
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+        temp |= 0x18 ;
+
+    XGINew_SetRegANDOR(pVBInfo->Part2Port,0x46,~0x1F,temp);
+    if ( pVBInfo->TVInfo & SetPALTV )
+    {
+        tempbx = 0x0382 ;
+        tempcx = 0x007e ;
+    }
+    else
+    {
+        tempbx = 0x0369 ;
+        tempcx = 0x0061 ;
+    }
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4b , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4c , temp ) ;
+
+    temp = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x03 ;
+    temp = temp << 2 ;
+    temp |= ( ( tempbx & 0xFF00 ) >> 8 ) & 0x03 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        temp |= 0x10 ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            temp |= 0x20 ;
+
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            temp |= 0x60 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x4d , temp ) ;
+    temp=XGINew_GetReg1( pVBInfo->Part2Port , 0x43 ) ;		/* 301b change */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , ( USHORT )( temp - 3 ) ) ;
+
+    if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
+    {
+        if ( pVBInfo->TVInfo & NTSC1024x768 )
+        {
+            TimingPoint = XGI_NTSC1024AdjTime ;
+            for( i = 0x1c , j = 0 ; i <= 0x30 ; i++ , j++ )
+            {
+                XGINew_SetReg1( pVBInfo->Part2Port , i , TimingPoint[ j ] ) ;
+            }
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , 0x72 ) ;
+        }
+    }
+
+    /* [ycchen] 01/14/03 Modify for 301C PALM Support */
+    if ( pVBInfo->VBType & VB_XGI301C )
+    {
+        if ( pVBInfo->TVInfo & SetPALMTV )
+	    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x08 , 0x08 ) ;	/* PALM Mode */
+    }
+
+    if ( pVBInfo->TVInfo & SetPALMTV )
+    {
+        tempax = ( UCHAR )XGINew_GetReg1( pVBInfo->Part2Port , 0x01 ) ;
+        tempax-- ;
+        XGINew_SetRegAND( pVBInfo->Part2Port , 0x01 , tempax ) ;
+
+        /* if ( !( pVBInfo->VBType & VB_XGI301C ) ) */
+        XGINew_SetRegAND( pVBInfo->Part2Port , 0x00 , 0xEF ) ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+    {
+        if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+        {
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , 0x00 ) ;
+        }
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        return ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDRegs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT push1 ,
+           push2 ,
+           pushbx ,
+           tempax ,
+           tempbx ,
+           tempcx ,
+           temp ,
+           tempah ,
+           tempbh ,
+           tempch ,
+           resinfo ,
+           modeflag ,
+           CRT1Index ;
+
+    XGI_LCDDesStruct *LCDBDesPtr = NULL ;
+
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+    }
+
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+    {
+        return ;
+    }
+
+    tempbx = pVBInfo->HDE ;			/* RHACTE=HDE-1 */
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempbx = tempbx >> 1 ;
+
+    tempbx -= 1 ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x2C , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x2B , 0x0F , temp ) ;
+    temp = 0x01 ;
+
+    if ( pVBInfo->LCDResInfo == Panel1280x1024 )
+    {
+        if ( pVBInfo->ModeType == ModeEGA )
+        {
+            if ( pVBInfo->VGAHDE >= 1024 )
+            {
+                temp = 0x02 ;
+                if ( pVBInfo->LCDInfo & LCDVESATiming )
+                    temp = 0x01 ;
+            }
+        }
+    }
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x0B , temp ) ;
+    tempbx = pVBInfo->VDE ;			/* RTVACTEO=(VDE-1)&0xFF */
+    push1 = tempbx ;
+    tempbx-- ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x03 , temp ) ;
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0C , ~0x07 , temp ) ;
+
+    tempcx = pVBInfo->VT - 1 ;
+    push2 = tempcx + 1 ;
+    temp = tempcx & 0x00FF ;			/* RVTVT=VT-1 */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x19 , temp ) ;
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    temp = temp << 5 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1A , temp ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x09 , 0xF0 , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0xF0 , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x17 , 0xFB , 0x00 ) ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x18 , 0xDF , 0x00 ) ;
+
+    /* Customized LCDB Des no add */
+    tempbx = 5 ;
+    LCDBDesPtr = ( XGI_LCDDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    tempah = pVBInfo->LCDResInfo ;
+    tempah &= PanelResInfo ;
+
+    if ( ( tempah == Panel1024x768 ) || ( tempah == Panel1024x768x75 ) )
+    {
+        tempbx = 1024 ;
+        tempcx = 768 ;
+    }
+    else if ( ( tempah == Panel1280x1024 ) || ( tempah == Panel1280x1024x75 ) )
+    {
+        tempbx = 1280 ;
+        tempcx = 1024 ;
+    }
+    else if ( tempah == Panel1400x1050 )
+    {
+        tempbx = 1400 ;
+        tempcx = 1050 ;
+    }
+    else
+    {
+        tempbx = 1600 ;
+        tempcx = 1200 ;
+    }
+
+    if ( pVBInfo->LCDInfo & EnableScalingLCD )
+    {
+        tempbx = pVBInfo->HDE ;
+        tempcx = pVBInfo->VDE ;
+    }
+
+    pushbx = tempbx ;
+    tempax = pVBInfo->VT ;
+    pVBInfo->LCDHDES = LCDBDesPtr->LCDHDES ;
+    pVBInfo->LCDHRS = LCDBDesPtr->LCDHRS ;
+    pVBInfo->LCDVDES = LCDBDesPtr->LCDVDES ;
+    pVBInfo->LCDVRS = LCDBDesPtr->LCDVRS ;
+    tempbx = pVBInfo->LCDVDES ;
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;	/* lcdvdes */
+
+    temp = tempbx & 0x00FF ;	/* RVEQ1EQ=lcdvdes */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x05 , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x06 , temp ) ;
+    tempch = ( ( tempcx & 0xFF00 ) >> 8 ) & 0x07 ;
+    tempbh = ( ( tempbx & 0xFF00 ) >> 8 ) & 0x07 ;
+    tempah = tempch ;
+    tempah = tempah << 3 ;
+    tempah |= tempbh ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x02 , tempah ) ;
+
+    /* getlcdsync() */
+    XGI_GetLCDSync( &tempax , &tempbx,pVBInfo ) ;
+    tempcx = tempbx ;
+    tempax = pVBInfo->VT ;
+    tempbx = pVBInfo->LCDVRS ;
+
+    /* if ( SetLCD_Info & EnableScalingLCD ) */
+    tempcx += tempbx ;
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;	/* RTVACTEE=lcdvrs */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x04 , temp ) ;
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    temp |= ( tempcx & 0x000F ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x01 , temp ) ;
+    tempcx = pushbx ;
+    tempax = pVBInfo->HT ;
+    tempbx = pVBInfo->LCDHDES ;
+    tempbx &= 0x0FFF ;
+
+    if ( XGI_IsLCDDualLink(  pVBInfo ) )
+    {
+        tempax = tempax >> 1 ;
+        tempbx = tempbx >> 1 ;
+        tempcx = tempcx >> 1 ;
+    }
+
+    if ( pVBInfo->VBType & VB_XGI302LV )
+        tempbx += 1 ;
+
+    if ( pVBInfo->VBType & VB_XGI301C )  /* tap4 */
+        tempbx += 1 ;
+
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1F , temp ) ;	/* RHBLKE=lcdhdes */
+    temp = ( ( tempbx & 0xFF00 ) >> 8 ) << 4 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x20 , temp ) ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x23 , temp ) ;	/* RHEQPLE=lcdhdee */
+    temp = ( tempcx & 0xFF00 ) >> 8 ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x25 , temp ) ;
+
+    /* getlcdsync() */
+    XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
+    tempcx = tempax ;
+    tempax = pVBInfo->HT ;
+    tempbx = pVBInfo->LCDHRS ;
+    /* if ( SetLCD_Info & EnableScalingLCD) */
+    if ( XGI_IsLCDDualLink( pVBInfo) )
+    {
+        tempax = tempax >> 1 ;
+        tempbx = tempbx >> 1 ;
+        tempcx = tempcx >> 1 ;
+    }
+
+    if ( pVBInfo->VBType & VB_XGI302LV )
+        tempbx += 1 ;
+
+    tempcx += tempbx ;
+
+    if ( tempcx >= tempax )
+        tempcx -= tempax ;
+
+    temp = tempbx & 0x00FF ;	/* RHBURSTS=lcdhrs */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x1C , temp ) ;
+
+    temp = ( tempbx & 0xFF00 ) >> 8 ;
+    temp = temp << 4 ;
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1D , ~0x0F0 , temp ) ;
+    temp = tempcx & 0x00FF ;	/* RHSYEXP2S=lcdhre */
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x21 , temp ) ;
+
+    if ( !( pVBInfo->LCDInfo & LCDVESATiming ) )
+    {
+        if ( pVBInfo->VGAVDE == 525 )
+        {
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+            {
+                temp = 0xC6 ;
+            }
+            else
+                temp = 0xC4 ;
+
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x30 , 0xB3 ) ;
+        }
+
+        if ( pVBInfo->VGAVDE == 420 )
+        {
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+            {
+                temp = 0x4F ;
+            }
+            else
+                temp = 0x4E ;
+            XGINew_SetReg1( pVBInfo->Part2Port , 0x2f , temp ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTap4Ptr */
+/* Input : */
+/* Output : di -> Tap4 Reg. Setting Pointer */
+/* Description : */
+/* --------------------------------------------------------------------- */
+XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempbx ,
+           i ;
+
+    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+    if ( tempcx == 0 )
+    {
+        tempax = pVBInfo->VGAHDE ;
+        tempbx = pVBInfo->HDE ;
+    }
+    else
+    {
+        tempax = pVBInfo->VGAVDE ;
+        tempbx = pVBInfo->VDE ;
+    }
+
+    if ( tempax < tempbx )
+        return &EnlargeTap4Timing[ 0 ] ;
+    else if( tempax == tempbx )
+        return &NoScaleTap4Timing[ 0 ] ; 	/* 1:1 */
+    else
+        Tap4TimingPtr = NTSCTap4Timing ; 	/* NTSC */
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        Tap4TimingPtr = PALTap4Timing ;
+
+
+    if ( pVBInfo->VBInfo & SetCRT2ToYPbPr )
+    {
+        if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+            Tap4TimingPtr = YPbPr525iTap4Timing ;
+        if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+            Tap4TimingPtr = YPbPr525pTap4Timing ;
+        if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+            Tap4TimingPtr = YPbPr750pTap4Timing ;
+    }
+
+    if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+        Tap4TimingPtr = HiTVTap4Timing ;
+
+    i = 0 ;
+    while( Tap4TimingPtr[ i ].DE != 0xFFFF )
+    {
+        if ( Tap4TimingPtr[ i ].DE == tempax )
+            break ;
+        i++ ;
+    }
+    return &Tap4TimingPtr[ i ] ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetTap4Regs */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ,
+           j ;
+
+    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+
+    if ( !( pVBInfo->VBType & VB_XGI301C ) )
+        return ;
+
+#ifndef Tap4
+    XGINew_SetRegAND( pVBInfo->Part2Port , 0x4E , 0xEB ) ;	/* Disable Tap4 */
+#else            /* Tap4 Setting */
+
+    Tap4TimingPtr = XGI_GetTap4Ptr( 0 , pVBInfo) ;  /* Set Horizontal Scaling */
+    for( i = 0x80 , j = 0 ; i <= 0xBF ; i++ , j++ )
+        XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+
+    if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+    {
+        Tap4TimingPtr = XGI_GetTap4Ptr( 1 , pVBInfo);	/* Set Vertical Scaling */
+        for( i = 0xC0 , j = 0 ; i < 0xFF ; i++ , j++ )
+            XGINew_SetReg1( pVBInfo->Part2Port , i , Tap4TimingPtr->Reg[ j ] ) ;
+    }
+
+    if ( ( pVBInfo->VBInfo & SetCRT2ToTV ) && ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) )
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x04 ) ;	/* Enable V.Scaling */
+    else
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x4E , ~0x14 , 0x10 ) ;	/* Enable H.Scaling */
+#endif
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i;
+    UCHAR *tempdi;
+    USHORT  modeflag;
+
+    if(ModeNo<=0x13)
+    {
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;      /* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;     /* si+Ext_ResInfo */
+    }
+
+
+    XGINew_SetReg1(pVBInfo->Part3Port,0x00,0x00);
+    if(pVBInfo->TVInfo&SetPALTV)
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+    }
+    else
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xF5);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xB7);
+    }
+
+    if(!(pVBInfo->VBInfo&SetCRT2ToTV))
+    {
+        return;
+    }
+
+    if(pVBInfo->TVInfo&SetPALMTV)
+    {
+        XGINew_SetReg1(pVBInfo->Part3Port,0x13,0xFA);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x14,0xC8);
+        XGINew_SetReg1(pVBInfo->Part3Port,0x3D,0xA8);
+    }
+
+    if((pVBInfo->VBInfo&SetCRT2ToHiVisionTV)|| (pVBInfo->VBInfo&SetCRT2ToYPbPr))
+    {
+        if(pVBInfo->TVInfo & SetYPbPrMode525i)
+        {
+            return;
+        }
+        tempdi=pVBInfo->HiTVGroup3Data;
+        if(pVBInfo->SetFlag&TVSimuMode)
+        {
+            tempdi=pVBInfo->HiTVGroup3Simu;
+            if(!(modeflag&Charx8Dot))
+            {
+                tempdi=pVBInfo->HiTVGroup3Text;
+            }
+        }
+
+        if(pVBInfo->TVInfo & SetYPbPrMode525p)
+        {
+            tempdi=pVBInfo->Ren525pGroup3;
+        }
+        if(pVBInfo->TVInfo & SetYPbPrMode750p)
+        {
+             tempdi=pVBInfo->Ren750pGroup3;
+        }
+
+        for(i=0;i<=0x3E;i++)
+        {
+            XGINew_SetReg1(pVBInfo->Part3Port,i,tempdi[i]);
+        }
+        if(pVBInfo->VBType&VB_XGI301C)  /* Marcovision */
+        {
+            if(pVBInfo->TVInfo & SetYPbPrMode525p)
+            {
+                XGINew_SetReg1(pVBInfo->Part3Port,0x28,0x3f);
+            }
+        }
+    }
+    return;
+}  /* {end of XGI_SetGroup3} */
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempcx ,
+           tempbx ,
+           modeflag ,
+           temp ,
+           temp2 ;
+
+    ULONG tempebx ,
+          tempeax ,
+          templong ;
+
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;	/* si+St_ResInfo */
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;	/* si+Ext_ResInfo */
+    }
+
+    temp = pVBInfo->RVBHCFACT ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x13 , temp ) ;
+
+    tempbx = pVBInfo->RVBHCMAX ;
+    temp = tempbx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x14 , temp ) ;
+    temp2 = ( ( tempbx & 0xFF00 ) >> 8 ) << 7 ;
+    tempcx = pVBInfo->VGAHT - 1 ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x16 , temp ) ;
+
+    temp =( ( tempcx & 0xFF00 ) >> 8 ) << 3 ;
+    temp2 |= temp ;
+
+    tempcx = pVBInfo->VGAVT - 1 ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        tempcx -= 5 ;
+    }
+
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x17 , temp ) ;
+    temp = temp2 | ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x15 , temp ) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x08 ) ;
+    tempcx = pVBInfo->VBInfo ;
+    tempbx = pVBInfo->VGAHDE ;
+
+    if ( modeflag & HalfDCLK )
+    {
+        tempbx = tempbx >> 1 ;
+    }
+
+    if ( XGI_IsLCDDualLink( pVBInfo ) )
+        tempbx = tempbx >> 1 ;
+
+    if(tempcx&SetCRT2ToHiVisionTV)
+    {
+        temp=0;
+        if(tempbx<=1024)
+            temp=0xA0;
+       if(tempbx == 1280)
+          temp = 0xC0;
+    }
+    else if(tempcx&SetCRT2ToTV)
+    {
+         temp=0xA0;
+         if(tempbx <= 800)
+             temp=0x80;
+    }
+    else
+    {
+	 temp=0x80;
+	 if(pVBInfo->VBInfo&SetCRT2ToLCD)
+	 {
+	     temp=0;
+	     if(tempbx>800)
+	         temp=0x60;
+	 }
+    }
+
+    if ( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+    {
+        temp = 0x00 ;
+        if ( pVBInfo->VGAHDE == 1280 )
+            temp = 0x40 ;
+        if ( pVBInfo->VGAHDE == 1024 )
+	    temp = 0x20 ;
+    }
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0E , ~0xEF , temp ) ;
+
+    tempebx = pVBInfo->VDE ;
+
+    if ( tempcx & SetCRT2ToHiVisionTV )
+    {
+        if ( !( temp & 0xE000 ) )
+            tempbx = tempbx >> 1 ;
+    }
+
+    tempcx = pVBInfo->RVBHRS ;
+    temp = tempcx & 0x00FF ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x18 , temp );
+
+    tempeax = pVBInfo->VGAVDE ;
+    tempcx |= 0x04000 ;
+
+
+    if ( tempeax <= tempebx )
+    {
+        tempcx=(tempcx&(~0x4000));
+        tempeax = pVBInfo->VGAVDE ;
+    }
+    else
+    {
+        tempeax -= tempebx ;
+    }
+
+
+    templong = ( tempeax * 256 * 1024 ) % tempebx ;
+    tempeax = ( tempeax * 256 * 1024 ) / tempebx ;
+    tempebx = tempeax ;
+
+    if ( templong != 0 )
+    {
+        tempebx++ ;
+    }
+
+
+    temp = ( USHORT )( tempebx & 0x000000FF ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x1B , temp ) ;
+
+    temp = ( USHORT )( ( tempebx & 0x0000FF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x1A , temp ) ;
+    tempbx = ( USHORT )( tempebx >> 16 ) ;
+    temp = tempbx & 0x00FF ;
+    temp = temp << 4 ;
+    temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x19 , temp ) ;
+
+    /* 301b */
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        temp = 0x0028 ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1C , temp ) ;
+        tempax = pVBInfo->VGAHDE ;
+        if ( modeflag & HalfDCLK )
+        {
+            tempax = tempax >> 1 ;
+        }
+
+        if ( XGI_IsLCDDualLink( pVBInfo ) )
+            tempax = tempax >> 1 ;
+
+        /* if((pVBInfo->VBInfo&(SetCRT2ToLCD))||((pVBInfo->TVInfo&SetYPbPrMode525p)||(pVBInfo->TVInfo&SetYPbPrMode750p))) { */
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            if ( tempax > 800 )
+                tempax -= 800 ;
+        }
+        else
+        {
+            if ( pVBInfo->VGAHDE > 800 )
+            {
+                if ( pVBInfo->VGAHDE == 1024 )
+                    tempax = ( tempax * 25 / 32 ) - 1 ;
+                else
+                    tempax = ( tempax * 20 / 32 ) - 1 ;
+            }
+        }
+        tempax -= 1 ;
+
+/*
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+        {
+            if ( pVBInfo->VBType & VB_XGI301LV )
+            {
+                if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+                {
+                    if ( pVBInfo->VGAHDE > 800 )
+                    {
+                        if ( pVBInfo->VGAHDE == 1024 )
+                            tempax = ( tempax * 25 / 32 ) - 1 ;
+                        else
+                            tempax = ( tempax * 20 / 32 ) - 1 ;
+                    }
+                }
+            }
+            else
+            {
+                if ( pVBInfo->VGAHDE > 800 )
+                {
+                    if ( pVBInfo->VGAHDE == 1024 )
+                        tempax = ( tempax * 25 / 32 ) - 1 ;
+                    else
+                        tempax = ( tempax * 20 / 32 ) - 1 ;
+                }
+            }
+        }
+*/
+
+        temp = ( tempax & 0xFF00 ) >> 8 ;
+        temp = ( ( temp & 0x0003 ) << 4 ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1E , temp ) ;
+        temp = ( tempax & 0x00FF ) ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x1D , temp ) ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToHiVisionTV ) )
+        {
+            if ( pVBInfo->VGAHDE > 800 )
+            {
+                XGINew_SetRegOR( pVBInfo->Part4Port , 0x1E , 0x08 ) ;
+            }
+        }
+        temp = 0x0036 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            if ( !( pVBInfo->TVInfo & ( NTSC1024x768 | SetYPbPrMode525p | SetYPbPrMode750p | SetYPbPrMode1080i ) ) )
+            {
+                temp |= 0x0001 ;
+                if ( ( pVBInfo->VBInfo & SetInSlaveMode ) && ( !( pVBInfo->TVInfo & TVSimuMode ) ) )
+                    temp &= ( ~0x0001 ) ;
+            }
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x1F , 0x00C0 , temp ) ;
+        tempbx = pVBInfo->HT ;
+        if ( XGI_IsLCDDualLink( pVBInfo ) )
+            tempbx = tempbx >> 1 ;
+        tempbx = ( tempbx >> 1 ) - 2 ;
+        temp = ( ( tempbx & 0x0700 ) >> 8 ) << 3 ;
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , 0x00C0 , temp ) ;
+        temp = tempbx & 0x00FF ;
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x22 , temp ) ;
+    }
+    /* end 301b */
+
+    if ( pVBInfo->ISXPDOS == 0 )
+        XGI_SetCRT2VCLK( ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetGroup5 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetGroup5( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT Pindex ,
+           Pdata ;
+
+    Pindex = pVBInfo->Part5Port ;
+    Pdata = pVBInfo->Part5Port + 1 ;
+    if ( pVBInfo->ModeType == ModeVGA )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetInSlaveMode | LoadDACFlag | CRT2DisplayFlag ) ) )
+        {
+            XGINew_EnableCRT2(pVBInfo) ;
+            /* LoadDAC2(pVBInfo->Part5Port,ModeNo,ModeIdIndex); */
+        }
+    }
+    return ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLcdPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i ,
+           tempdx ,
+           tempcx ,
+           tempbx ,
+           tempal ,
+           modeflag ,
+           table ;
+
+    XGI330_LCDDataTablStruct *tempdi = 0 ;
+
+
+    tempbx = BX;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempal = tempal & 0x0f ;
+
+    if ( tempbx <= 1 )		/* ExpLink */
+    {
+        if ( ModeNo <= 0x13 )
+        {
+            tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ; /* find no Ext_CRT2CRTC2 */
+        }
+        else
+        {
+            tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            if ( ModeNo <= 0x13 )
+                tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC2 ;
+            else
+                tempal= pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC2 ;
+        }
+
+        if ( tempbx & 0x01 )
+            tempal = ( tempal >> 4 ) ;
+
+        tempal = ( tempal & 0x0f ) ;
+    }
+
+    tempcx = LCDLenList[ tempbx ] ;	/* mov cl,byte ptr cs:LCDLenList[bx] */
+
+    if ( pVBInfo->LCDInfo & EnableScalingLCD )	/* ScaleLCD */
+    {
+        if ( ( tempbx == 5 ) || ( tempbx ) == 7 )
+            tempcx = LCDDesDataLen2 ;
+        else if ( ( tempbx == 3 ) || ( tempbx == 8 ) )
+            tempcx = LVDSDesDataLen2 ;
+    }
+    /* mov di, word ptr cs:LCDDataList[bx] */
+    /* tempdi=pVideoMemory[LCDDataList+tempbx*2]|(pVideoMemory[LCDDataList+tempbx*2+1]<<8); */
+
+    switch( tempbx )
+    {
+        case 0:
+            tempdi = XGI_EPLLCDCRT1Ptr_H ;
+            break ;
+        case 1:
+            tempdi = XGI_EPLLCDCRT1Ptr_V ;
+             break ;
+        case 2:
+            tempdi = XGI_EPLLCDDataPtr ;
+            break ;
+        case 3:
+            tempdi = XGI_EPLLCDDesDataPtr ;
+            break ;
+        case 4:
+            tempdi = XGI_LCDDataTable ;
+            break ;
+        case 5:
+            tempdi = XGI_LCDDesDataTable ;
+            break ;
+        case 6:
+            tempdi = XGI_EPLCHLCDRegPtr ;
+            break ;
+        case 7:
+        case 8:
+        case 9:
+            tempdi = 0 ;
+            break ;
+        default:
+        break ;
+    }
+
+    if ( tempdi == 0x00 )  /* OEMUtil */
+        return 0 ;
+
+    table = tempbx ;
+    i = 0 ;
+
+    while( tempdi[ i ].PANELID != 0xff )
+    {
+        tempdx = pVBInfo->LCDResInfo ;
+        if ( tempbx & 0x0080 )     /* OEMUtil */
+        {
+            tempbx &= ( ~0x0080 ) ;
+            tempdx = pVBInfo->LCDTypeInfo ;
+        }
+
+        if ( pVBInfo->LCDInfo & EnableScalingLCD )
+        tempdx &= ( ~PanelResInfo ) ;
+
+        if ( tempdi[ i ].PANELID == tempdx )
+        {
+            tempbx = tempdi[ i ].MASK ;
+            tempdx = pVBInfo->LCDInfo ;
+
+            if ( ModeNo <= 0x13 )         /* alan 09/10/2003 */
+                tempdx |= SetLCDStdMode ;
+
+            if ( modeflag & HalfDCLK )
+                tempdx |= SetLCDLowResolution ;
+
+            tempbx &= tempdx;
+            if ( tempbx == tempdi[ i ].CAP )
+                break ;
+        }
+        i++ ;
+    }
+
+    if ( table == 0 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDSCRT11024x768_1_H[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDSCRT11024x768_2_H[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDSCRT11280x1024_1_H[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDSCRT11280x1024_2_H[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDSCRT11400x1050_1_H[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDSCRT11400x1050_2_H[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDSCRT11600x1200_1_H[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSCRT11024x768_1_Hx75[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSCRT11024x768_2_Hx75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDSCRT11280x1024_1_Hx75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDSCRT11280x1024_2_Hx75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 1 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDSCRT11024x768_1_V[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDSCRT11024x768_2_V[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDSCRT11280x1024_1_V[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDSCRT11280x1024_2_V[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDSCRT11400x1050_1_V[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDSCRT11400x1050_2_V[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDSCRT11600x1200_1_V[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSCRT11024x768_1_Vx75[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSCRT11024x768_2_Vx75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDSCRT11280x1024_1_Vx75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDSCRT11280x1024_2_Vx75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 2 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDS1024x768Data_1[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDS1024x768Data_2[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDS1280x1024Data_1[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDS1280x1024Data_2[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDS1400x1050Data_1[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDS1400x1050Data_2[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDS1600x1200Data_1[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDSNoScalingData[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDS1024x768Data_1x75[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDS1024x768Data_2x75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDS1280x1024Data_1x75[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_LVDS1280x1024Data_2x75[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_LVDSNoScalingDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 3 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_LVDS1024x768Des_1[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_LVDS1024x768Des_3[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_LVDS1024x768Des_2[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_LVDS1280x1024Des_1[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_LVDS1280x1024Des_2[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_LVDS1400x1050Des_1[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_LVDS1400x1050Des_2[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_LVDS1600x1200Des_1[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_LVDSNoScalingDesData[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_LVDS1024x768Des_1x75[ tempal ] ;
+                break ;
+            case 10:
+                return &XGI_LVDS1024x768Des_3x75[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_LVDS1024x768Des_2x75[ tempal ] ;
+                break;
+            case 12:
+                return &XGI_LVDS1280x1024Des_1x75[ tempal ] ;
+                break ;
+            case 13:
+                return &XGI_LVDS1280x1024Des_2x75[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_LVDSNoScalingDesDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 4 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtLCD1024x768Data[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_StLCD1024x768Data[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CetLCD1024x768Data[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_ExtLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 4:
+                return &XGI_StLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 5:
+                return &XGI_CetLCD1280x1024Data[ tempal ] ;
+                break ;
+            case 6:
+                return &XGI_ExtLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 7:
+                return &XGI_StLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_CetLCD1400x1050Data[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_ExtLCD1600x1200Data[ tempal ] ;
+                break  ;
+            case 10:
+                return &XGI_StLCD1600x1200Data[ tempal ] ;
+                break ;
+            case 11:
+                return &XGI_NoScalingData[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 13:
+                return &XGI_ExtLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_CetLCD1024x768x75Data[ tempal ] ;
+                break ;
+            case 15:
+                 return &XGI_ExtLCD1280x1024x75Data[ tempal ] ;
+                break ;
+            case 16:
+                return &XGI_StLCD1280x1024x75Data[ tempal ] ;
+                break;
+            case 17:
+                return &XGI_CetLCD1280x1024x75Data[ tempal ] ;
+                break;
+            case 18:
+                return &XGI_NoScalingDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 5 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_StLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CetLCDDes1024x768Data[ tempal ] ;
+                break ;
+            case 3:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 4:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 5:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_CetLCDDLDes1280x1024Data[ tempal ] ;
+                else
+                    return &XGI_CetLCDDes1280x1024Data[ tempal ] ;
+                break ;
+            case 6:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1400x1050Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 7:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1400x1050Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 8:
+                return &XGI_CetLCDDes1400x1050Data[ tempal ] ;
+                break ;
+            case 9:
+                return &XGI_CetLCDDes1400x1050Data2[ tempal ] ;
+                break ;
+            case 10:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1600x1200Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1600x1200Data[ tempal ] ;
+                break ;
+            case 11:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1600x1200Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1600x1200Data[ tempal ] ;
+                break ;
+            case 12:
+                return &XGI_NoScalingDesData[ tempal ] ;
+                break;
+            case 13:
+                return &XGI_ExtLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 14:
+                return &XGI_StLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 15:
+                return &XGI_CetLCDDes1024x768x75Data[ tempal ] ;
+                break ;
+            case 16:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_ExtLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_ExtLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 17:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_StLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_StLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 18:
+                if ( ( pVBInfo->VBType & VB_XGI301LV ) || ( pVBInfo->VBType & VB_XGI302LV ) )
+                    return &XGI_CetLCDDLDes1280x1024x75Data[ tempal ] ;
+                else
+                    return &XGI_CetLCDDes1280x1024x75Data[ tempal ] ;
+                break ;
+            case 19:
+                return &XGI_NoScalingDesDatax75[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if ( table == 6 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_CH7017LV1024x768[ tempal ] ;
+                break ;
+            case 1:
+                return &XGI_CH7017LV1400x1050[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    return 0 ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT i , tempdx , tempbx , tempal , modeflag , table ;
+    XGI330_TVDataTablStruct *tempdi = 0 ;
+
+    tempbx = BX ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        tempal = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    tempal = tempal & 0x3f ;
+    table = tempbx ;
+
+    switch( tempbx )
+    {
+        case 0:
+            tempdi = 0 ;	/*EPLCHTVCRT1Ptr_H;*/
+            if ( pVBInfo->IF_DEF_CH7007 == 1 )
+            {
+                tempdi = XGI_EPLCHTVCRT1Ptr;
+            }
+            break ;
+        case 1:
+            tempdi = 0 ;	/*EPLCHTVCRT1Ptr_V;*/
+            if ( pVBInfo->IF_DEF_CH7007 == 1 )
+            {
+                tempdi = XGI_EPLCHTVCRT1Ptr;
+            }
+            break ;
+        case 2:
+            tempdi = XGI_EPLCHTVDataPtr ;
+            break ;
+        case 3:
+            tempdi = 0 ;
+            break ;
+        case 4:
+            tempdi = XGI_TVDataTable ;
+            break ;
+        case 5:
+            tempdi = 0 ;
+            break ;
+        case 6:
+            tempdi = XGI_EPLCHTVRegPtr ;
+            break ;
+        default:
+            break ;
+    }
+
+    if ( tempdi == 0x00 )  /* OEMUtil */
+        return( 0 ) ;
+
+    tempdx = pVBInfo->TVInfo ;
+
+    if ( pVBInfo->VBInfo & SetInSlaveMode )
+        tempdx = tempdx | SetTVLockMode ;
+
+    if ( modeflag & HalfDCLK )
+        tempdx = tempdx | SetTVLowResolution ;
+
+    i = 0 ;
+
+    while( tempdi[ i ].MASK != 0xffff )
+    {
+        if ( ( tempdx & tempdi[ i ].MASK ) == tempdi[ i ].CAP )
+            break ;
+        i++ ;
+    }
+
+    if ( table == 0x00 ) /* 07/05/22 */
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVCRT1UNTSC_H[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVCRT1ONTSC_H[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVCRT1UPAL_H[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVCRT1OPAL_H[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+#endif
+    }
+    else if ( table == 0x01 )
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVCRT1UNTSC_V[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVCRT1ONTSC_V[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVCRT1UPAL_V[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVCRT1OPAL_V[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+#endif
+    }
+    else if ( table == 0x04 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_ExtPALData[ tempal ] ;
+		break ;
+            case 1:
+                return &XGI_ExtNTSCData[ tempal ] ;
+ 		break ;
+      	    case 2:
+      	   	return &XGI_StPALData[ tempal ] ;
+ 		break ;
+            case 3:
+           	return &XGI_StNTSCData[ tempal ] ;
+ 		break ;
+      	    case 4:
+      	   	return &XGI_ExtHiTVData[ tempal ] ;
+ 		break ;
+      	    case 5:
+      	   	return &XGI_St2HiTVData[ tempal ] ;
+ 		break ;
+      	    case 6:
+      	   	return &XGI_ExtYPbPr525iData[ tempal ] ;
+ 		break ;
+      	    case 7:
+      	   	return &XGI_ExtYPbPr525pData[ tempal ] ;
+ 		break ;
+      	    case 8:
+      	   	return &XGI_ExtYPbPr750pData[ tempal ] ;
+ 		break ;
+      	    case 9:
+      	   	return &XGI_StYPbPr525iData[ tempal ] ;
+ 		break ;
+      	    case 10:
+      	   	return &XGI_StYPbPr525pData[ tempal ] ;
+ 		break ;
+      	    case 11:
+      	   	return &XGI_StYPbPr750pData[ tempal ] ;
+             	break;
+            case 12: 	/* avoid system hang */
+      	   	return &XGI_ExtNTSCData[ tempal ] ;
+             	break ;
+            case 13:
+      	   	return &XGI_St1HiTVData[ tempal ] ;
+             	break ;
+            default:
+                break ;
+        }
+    }
+    else if( table == 0x02 )
+    {
+        switch( tempdi[ i ].DATAPTR )
+        {
+            case 0:
+                return &XGI_CHTVUNTSCData[ tempal ] ;
+                break ;
+            case 1:
+      	        return &XGI_CHTVONTSCData[ tempal ] ;
+                break ;
+            case 2:
+                return &XGI_CHTVUPALData[ tempal ] ;
+                break ;
+            case 3:
+                return &XGI_CHTVOPALData[ tempal ] ;
+                break ;
+            default:
+                break ;
+        }
+    }
+    else if( table == 0x06 )
+    {
+#ifdef WIN2000
+        if ( pVBInfo->IF_DEF_CH7007 == 1 )
+        {
+          /* VideoDebugPrint((0, "XGI_GetTVPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
+          switch( tempdi[ i ].DATAPTR )
+          {
+            case 0:
+                return &CH7007TVReg_UNTSC[ tempal ] ;
+                break ;
+            case 1:
+                return &CH7007TVReg_ONTSC[ tempal ] ;
+                break ;
+            case 2:
+                return &CH7007TVReg_UPAL[ tempal ] ;
+                break ;
+            case 3:
+                return &CH7007TVReg_OPAL[ tempal ] ;
+                break ;
+            default:
+                break ;
+          }
+        }
+        else
+        {
+            switch( tempdi[ i ].DATAPTR )
+            {
+              case 0:
+                return &XGI_CHTVRegUNTSC[ tempal ] ;
+                break ;
+              case 1:
+                return &XGI_CHTVRegONTSC[ tempal ] ;
+                break ;
+              case 2:
+                return &XGI_CHTVRegUPAL[ tempal ] ;
+                break ;
+              case 3:
+                return &XGI_CHTVRegOPAL[ tempal ] ;
+                break ;
+              default:
+                break ;
+            }
+        }
+#endif
+    }
+    return( 0 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BacklightByDrv */
+/* Input : */
+/* Output : TRUE -> Skip backlight control */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BacklightByDrv( PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempah ;
+
+    tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x3A ) ;
+    if ( tempah & BacklightControlBit )
+        return TRUE ;
+    else
+        return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDDisable */
+/* Input : */
+/* Output : */
+/* Description : Turn off VDD & Backlight : Fire disable procedure */
+/* --------------------------------------------------------------------- */
+/*
+void XGI_FirePWDDisable( PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x00 , 0xFC ) ;
+}
+*/
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_FirePWDEnable */
+/* Input : */
+/* Output : */
+/* Description : Turn on VDD & Backlight : Fire enable procedure */
+/* --------------------------------------------------------------------- */
+void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x03 , 0xFC ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x40 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableGatingCRT */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x00 ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+    if ( tempbl == 1 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S1, pVBInfo ) ;
+
+    if ( tempbl == 2 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S2, pVBInfo ) ;
+
+    if ( tempbl == 3 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S3, pVBInfo ) ;
+
+    if ( tempbl == 4 )
+        XGINew_LCD_Wait_Time( pVBInfo->LCDCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPanelPower */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/O : ah = 0011b = 03h ; Backlight on, Power on */
+/* = 0111b = 07h ; Backlight on, Power off */
+/* = 1011b = 0Bh ; Backlight off, Power on */
+/* = 1111b = 0Fh ; Backlight off, Power off */
+/* --------------------------------------------------------------------- */
+void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x26 , tempbl , tempah ) ;
+    else
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x11 , tempbl , tempah ) ;
+}
+
+UCHAR XG21GPIODataTransfer(UCHAR ujDate)
+{
+    UCHAR  ujRet = 0;
+    UCHAR  i = 0;
+
+    for (i=0; i<8; i++)
+	{
+    	ujRet = ujRet << 1;
+	/* ujRet |= GETBITS(ujDate >> i, 0:0); */
+        ujRet |= (ujDate >> i) & 1;
+    }
+
+	return ujRet;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output                                                                     */
+/*      bl[5] : LVDS signal                                                   */
+/*      bl[1] : LVDS backlight                                                */
+/*      bl[0] : LVDS VDD                                                      */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x23 ) ; /* enable GPIO write */
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp = XG21GPIODataTransfer(temp);
+    temp &= 0x23;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+    return temp;
+}
+
+/*----------------------------------------------------------------------------*/
+/* output                                                                     */
+/*      bl[5] : LVDS signal                                                   */
+/*      bl[1] : LVDS backlight                                                */
+/*      bl[0] : LVDS VDD                                                      */
+/*----------------------------------------------------------------------------*/
+UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,CRB4,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x0C ) ; /* enable GPIO write */
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp &= 0x0C;
+    temp >>= 2;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4A , CR4A ) ;
+    CRB4 = XGINew_GetReg1( pVBInfo->P3d4 , 0xB4 ) ;
+    temp |= ((CRB4&0x04)<<3);
+    return temp;
+}
+/*----------------------------------------------------------------------------*/
+/* input                                                                      */
+/*      bl[5] : 1;LVDS signal on                                              */
+/*      bl[1] : 1;LVDS backlight on                                           */
+/*      bl[0] : 1:LVDS VDD on                                                 */
+/*      bh: 100000b : clear bit 5, to set bit5                                */
+/*          000010b : clear bit 1, to set bit1                                */
+/*          000001b : clear bit 0, to set bit0                                */
+/*----------------------------------------------------------------------------*/
+void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    tempbh &= 0x23;
+    tempbl &= 0x23;
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+
+    if (tempbh&0x20)
+    {
+      temp = (tempbl>>4)&0x02;
+
+      XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+    }
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x48 ) ;
+
+    temp = XG21GPIODataTransfer(temp);
+    temp &= ~tempbh;
+    temp |= tempbl;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , temp ) ;
+}
+
+void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR CR4A,temp;
+    USHORT tempbh0,tempbl0;
+
+    tempbh0 = tempbh;
+    tempbl0 = tempbl;
+    tempbh0 &= 0x20;
+    tempbl0 &= 0x20;
+    tempbh0 >>= 3;
+    tempbl0 >>= 3;
+
+    if (tempbh&0x20)
+    {
+      temp = (tempbl>>4)&0x02;
+
+      XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~0x02 , temp) ; /* CR B4[1] */
+
+    }
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0xB4 , ~tempbh0 , tempbl0 ) ;
+
+    CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
+    tempbh &= 0x03;
+    tempbl &= 0x03;
+    tempbh <<= 2;
+    tempbl <<= 2;                                       /* GPIOC,GPIOD */
+    XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~tempbh ) ; /* enable GPIO write */
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x48 , ~tempbh , tempbl ) ;
+}
+
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+    if (index<sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct))
+    {
+      return index;
+    }
+    return 0;
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_XG21SetPanelDelay */
+/* Input : */
+/* Output : */
+/* Description : */
+/* I/P : bl : 1 ; T1 : the duration between CPL on and signal on */
+/* : bl : 2 ; T2 : the duration signal on and Vdd on */
+/* : bl : 3 ; T3 : the duration between CPL off and signal off */
+/* : bl : 4 ; T4 : the duration signal off and Vdd off */
+/* --------------------------------------------------------------------- */
+void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT index ;
+
+    index = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    if ( tempbl == 1 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S1, pVBInfo ) ;
+
+    if ( tempbl == 2 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S2, pVBInfo ) ;
+
+    if ( tempbl == 3 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S3, pVBInfo ) ;
+
+    if ( tempbl == 4 )
+        XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S4, pVBInfo ) ;
+}
+
+BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT xres ,
+           yres ,
+           colordepth ,
+           modeflag ,
+           resindex ,
+           lvdstableindex;
+
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if ( !( modeflag & Charx8Dot ) )
+    {
+        xres /= 9;
+        xres *= 8;
+    }
+
+    if ( ModeNo > 0x13 )
+    {
+        if ( ( ModeNo>0x13 ) && ( modeflag & HalfDCLK ) )
+        {
+          xres *=  2 ;
+        }
+        if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+        {
+          yres *=  2 ;
+        }
+    }
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    if ( xres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) )
+      return FALSE;
+
+    if ( yres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE) )
+      return FALSE;
+
+    if ( ModeNo > 0x13 )
+    {
+      if ( ( xres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) ) ||
+           ( yres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE)) )
+      {
+          colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
+          if ( colordepth > 2 )
+          {
+            return FALSE;
+          }
+      }
+    }
+    return TRUE;
+}
+
+void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[0] 1: 18bit */
+    temp = ( temp & 1 ) << 6;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0x40 , temp ) ;      /* SR06[6] 18bit Dither */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ;  /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: dual 12bits */
+
+}
+
+void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+{
+    UCHAR temp;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[1:0] 01: 18bit, 00: dual 12, 10: single 24 */
+    temp = ( temp & 3 ) << 6;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x06 , ~0xc0 , temp & 0x80 ) ;  /* SR06[7]0: dual 12/1: single 24 [6] 18bit Dither <= 0 h/w recommend */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x09 , ~0xc0 , temp | 0x80 ) ;  /* SR09[7] enable FP output, SR09[6] 1: sigle 18bits, 0: 24bits */
+
+}
+
+void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR temp,Miscdata;
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ,
+           lvdstableindex ;
+    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    USHORT value;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+
+    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp &= LCDPolarity;
+    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+    XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
+
+    XGI_SetXG21FPBits(pVBInfo);
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if (!( modeflag & Charx8Dot ))
+      xres = xres * 8 / 9;
+
+    LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+    LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+    if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+    {
+      LVDSHBS -=  xres/4 ;
+    }
+    if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+    LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+    if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+    LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+    if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+    LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+    LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+    LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+    if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+    {
+      LVDSVBS +=  yres/2 ;
+    }
+    if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+    LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+    if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+    LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+    if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+    LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+    }
+
+    /* HT SR0B[1:0] CR00 */
+    value = ( LVDSHT >> 3 ) - 5;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+    /* HBS SR0B[5:4] CR02 */
+    value = ( LVDSHBS >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+    /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+    value = ( LVDSHBE >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+    /* HRS SR0B[7:6] CR04 */
+    value = ( LVDSHRS >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+    /* Panel HRS SR2F[1:0] SR2E[7:0]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+    /* HRE SR0C[2] CR05[4:0] */
+    value = ( LVDSHRE >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+    /* Panel HRE SR2F[7:2]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+    /* VT SR0A[0] CR07[5][0] CR06 */
+    value = LVDSVT - 2 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+    /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+    value = LVDSVBS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+    /* VBE SR0A[4] CR16 */
+    value = LVDSVBE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+    /* VRS SR0A[3] CR7[7][2] CR10 */
+    value = LVDSVRS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+    /* Panel VRS SR3F[1:0] SR34[7:0] SR33[0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0x03 , ( value & 0x600 ) >> 9 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , (value >> 1) & 0xFF ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x33 , ~0x01 , value & 0x01 ) ;
+
+    /* VRE SR0A[5] CR11[3:0] */
+    value = LVDSVRE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+    /* Panel VRE SR3F[7:2] */ /* SR3F[7] has to be 0, h/w bug */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0x7C ) ;
+
+    for ( temp=0, value = 0; temp < 3; temp++)
+    {
+
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+        value += 0x10;
+    }
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ;    /* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;    /* set data, panning = 0, shift left 1 dot*/
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* Enable Attribute */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+    }
+
+
+}
+
+/* no shadow case */
+void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR temp,Miscdata;
+    USHORT xres ,
+           yres ,
+           modeflag ,
+           resindex ,
+           lvdstableindex ;
+    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    USHORT value;
+
+    lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
+    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp &= LCDPolarity;
+    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+
+    XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
+
+    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
+
+    XGI_SetXG27FPBits(pVBInfo);
+    resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
+    if ( ModeNo <= 0x13 )
+    {
+        xres = pVBInfo->StResInfo[ resindex ].HTotal ;
+        yres = pVBInfo->StResInfo[ resindex ].VTotal ;
+        modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;    /* si+St_ResInfo */
+    }
+    else
+    {
+        xres = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
+        yres = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex].Ext_ModeFlag ; /* si+St_ModeFlag */
+    }
+
+    if (!( modeflag & Charx8Dot ))
+      xres = xres * 8 / 9;
+
+    LVDSHT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHT;
+
+    LVDSHBS = xres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE - xres ) / 2 ;
+    if ( ( ModeNo<=0x13 ) && ( modeflag & HalfDCLK ) )
+    {
+      LVDSHBS -=  xres/4 ;
+    }
+    if (LVDSHBS > LVDSHT) LVDSHBS -= LVDSHT ;
+
+    LVDSHRS = LVDSHBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHFP ;
+    if (LVDSHRS > LVDSHT) LVDSHRS -= LVDSHT ;
+
+    LVDSHRE = LVDSHRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHSYNC ;
+    if (LVDSHRE > LVDSHT) LVDSHRE -= LVDSHT ;
+
+    LVDSHBE = LVDSHBS + LVDSHT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE ;
+
+    LVDSVT = pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVT;
+
+    LVDSVBS = yres + ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE - yres ) / 2 ;
+    if ( ( ModeNo>0x13 ) && ( modeflag & DoubleScanMode ) )
+    {
+      LVDSVBS +=  yres/2 ;
+    }
+    if (LVDSVBS > LVDSVT) LVDSVBS -= LVDSVT ;
+
+    LVDSVRS = LVDSVBS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVFP ;
+    if (LVDSVRS > LVDSVT) LVDSVRS -= LVDSVT ;
+
+    LVDSVRE = LVDSVRS + pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVSYNC ;
+    if (LVDSVRE > LVDSVT) LVDSVRE -= LVDSVT ;
+
+    LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
+
+    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1 , 0x1 ) ;
+    }
+
+    /* HT SR0B[1:0] CR00 */
+    value = ( LVDSHT >> 3 ) - 5;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x0 , (value & 0xFF) ) ;
+
+    /* HBS SR0B[5:4] CR02 */
+    value = ( LVDSHBS >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0x30 , ( value & 0x300 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x2 , (value & 0xFF) ) ;
+
+    /* HBE SR0C[1:0] CR05[7] CR03[4:0] */
+    value = ( LVDSHBE >> 3 ) - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x03 , ( value & 0xC0 ) >> 6 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x80 , ( value & 0x20 ) << 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x03 , ~0x1F , value & 0x1F ) ;
+
+    /* HRS SR0B[7:6] CR04 */
+    value = ( LVDSHRS >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0B , ~0xC0 , ( value & 0x300 ) >> 2 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x4 , (value & 0xFF) ) ;
+
+    /* Panel HRS SR2F[1:0] SR2E[7:0]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0x03 , ( value & 0x300 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x2E , (value & 0xFF) ) ;
+
+    /* HRE SR0C[2] CR05[4:0] */
+    value = ( LVDSHRE >> 3 ) + 2;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0C , ~0x04 , ( value & 0x20 ) >> 3 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x05 , ~0x1F , value & 0x1F ) ;
+
+    /* Panel HRE SR2F[7:2]  */
+    value--;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x2F , ~0xFC , value << 2 ) ;
+
+    /* VT SR0A[0] CR07[5][0] CR06 */
+    value = LVDSVT - 2 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x01 , ( value & 0x400 ) >> 10 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x01 , ( value & 0x100 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x06 , (value & 0xFF) ) ;
+
+    /* VBS SR0A[2] CR09[5] CR07[3] CR15 */
+    value = LVDSVBS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x04 , ( value & 0x400 ) >> 8 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x09 , ~0x20 , ( value & 0x200 ) >> 4 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x08 , ( value & 0x100 ) >> 5 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x15 , (value & 0xFF) ) ;
+
+    /* VBE SR0A[4] CR16 */
+    value = LVDSVBE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x10 , ( value & 0x100 ) >> 4 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x16 , (value & 0xFF) ) ;
+
+    /* VRS SR0A[3] CR7[7][2] CR10 */
+    value = LVDSVRS - 1 ;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x08 , ( value & 0x400 ) >> 7 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x80 , ( value & 0x200 ) >> 2 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x04 , ( value & 0x100 ) >> 6 ) ;
+    XGINew_SetReg1( pVBInfo->P3d4 , 0x10 , (value & 0xFF) ) ;
+
+    /* Panel VRS SR35[2:0] SR34[7:0] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x07 , ( value & 0x700 ) >> 8 ) ;
+    XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , value & 0xFF ) ;
+
+    /* VRE SR0A[5] CR11[3:0] */
+    value = LVDSVRE - 1;
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x0A , ~0x20 , ( value & 0x10 ) << 1 ) ;
+    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x11 , ~0x0F , value & 0x0F ) ;
+
+    /* Panel VRE SR3F[7:2] */
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC , ( value << 2 ) & 0xFC ) ;
+
+    for ( temp=0, value = 0; temp < 3; temp++)
+    {
+
+        XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , value ) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData1) ;
+        XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , pVBInfo->XG21_LVDSCapList[lvdstableindex].VCLKData2) ;
+        value += 0x10;
+    }
+
+    if (!( modeflag & Charx8Dot ))
+    {
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x13 ) ;    /* set index */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x00 ) ;    /* set data, panning = 0, shift left 1 dot*/
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* Enable Attribute */
+        XGINew_SetReg3( pVBInfo->P3c0 , 0x20 ) ;
+
+        XGINew_GetReg2( pVBInfo->P3da ) ;           /* reset 3da */
+    }
+
+
+}
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_IsLCDON */
+/* Input : */
+/* Output : FALSE : Skip PSC Control */
+/* TRUE: Disable PSC */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ;
+
+    tempax = pVBInfo->VBInfo ;
+    if ( tempax & SetCRT2ToDualEdge )
+        return FALSE ;
+    else if ( tempax & ( DisableCRT2Display | SwitchToCRT2 | SetSimuScanMode ) )
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnablePWD(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ,
+           temp ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+    temp = pVBInfo->LCDCapList[ index ].PWD_2B ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2B , temp ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2C , pVBInfo->LCDCapList[ index ].PWD_2C ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2D , pVBInfo->LCDCapList[ index ].PWD_2D ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2E , pVBInfo->LCDCapList[ index ].PWD_2E ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x2F , pVBInfo->LCDCapList[ index ].PWD_2F ) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x80 ) ; 	/* enable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisablePWD */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo )
+{
+    XGINew_SetRegAND( pVBInfo->Part4Port , 0x27 , 0x7F ) ;	/* disable PWD */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableChISLCD */
+/* Input : */
+/* Output : FALSE -> Not LCD Mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           tempah ;
+
+    tempbx = pVBInfo->SetFlag & ( DisableChA | DisableChB ) ;
+    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port  , 0x2E ) ) ;
+
+    if ( tempbx & ( EnableChA | DisableChA ) )
+    {
+        if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
+            return FALSE ;
+    }
+
+    if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+        return FALSE ;
+
+    if ( tempah & 0x01 )       /* Chk LCDB Mode */
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableChISLCD */
+/* Input : */
+/* Output : 0 -> Not LCD mode */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           tempah ;
+
+
+    tempbx = pVBInfo->SetFlag & ( EnableChA | EnableChB ) ;
+    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
+
+    if ( tempbx & ( EnableChA | DisableChA ) )
+    {
+        if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
+            return FALSE ;
+    }
+
+    if ( !( tempbx & ( EnableChB | DisableChB ) ) )
+        return FALSE ;
+
+    if ( tempah & 0x01 )       /* Chk LCDB Mode */
+        return TRUE ;
+
+    return FALSE ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr(  PVB_DEVICE_INFO pVBInfo )
+{
+    UCHAR tempal ,
+          tempah ,
+          tempbl ,
+          i ;
+
+    tempah = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
+    tempal = tempah & 0x0F ;
+    tempah = tempah & 0xF0 ;
+    i = 0 ;
+    tempbl =  pVBInfo->LCDCapList[ i ].LCD_ID ;
+
+    while( tempbl != 0xFF )
+    {
+        if ( tempbl & 0x80 )   /* OEMUtil */
+        {
+            tempal = tempah ;
+            tempbl = tempbl & ~( 0x80 ) ;
+        }
+
+        if ( tempal == tempbl )
+            break ;
+
+        i++ ;
+
+        tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+    }
+
+    return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDCapPtr1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetLCDCapPtr1( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempah ,
+           tempal ,
+           tempbl ,
+           i ;
+
+    tempal = pVBInfo->LCDResInfo ;
+    tempah = pVBInfo->LCDTypeInfo ;
+
+    i = 0 ;
+    tempbl =  pVBInfo->LCDCapList[ i ].LCD_ID;
+
+    while( tempbl != 0xFF )
+    {
+        if ( ( tempbl & 0x80 ) && ( tempbl != 0x80 ) )
+        {
+            tempal = tempah ;
+            tempbl &= ~0x80 ;
+        }
+
+        if ( tempal == tempbl )
+            break ;
+
+        i++ ;
+        tempbl = pVBInfo->LCDCapList[ i ].LCD_ID ;
+    }
+
+    if ( tempbl == 0xFF )
+    {
+        pVBInfo->LCDResInfo = Panel1024x768 ;
+        pVBInfo->LCDTypeInfo = 0 ;
+        i = 0 ;
+    }
+
+    return i ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetLCDSync */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetLCDSync( USHORT* HSyncWidth , USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT Index ;
+
+    Index = XGI_GetLCDCapPtr(pVBInfo) ;
+    *HSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_HSyncWidth ;
+    *VSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_VSyncWidth ;
+
+    return ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_EnableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbl ,
+           tempah ;
+
+    if ( pVBInfo->SetFlag == Win9xDOSMode )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+            return ;
+        }
+        else  /* LVDS or CH7017 */
+            return ;
+    }
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !XGI_DisableChISLCD(pVBInfo) )
+        {
+            if ( ( XGI_EnableChISLCD(pVBInfo) ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                {
+                    XGI_EnablePWD( pVBInfo);
+                }
+                else
+                {
+                    pVBInfo->LCDInfo &= ( ~SetPWDEnable ) ;
+                    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        tempbl = 0xFD ;
+                        tempah = 0x02 ;
+                    }
+                    else
+                    {
+                        tempbl = 0xFB ;
+                        tempah = 0x00 ;
+                    }
+
+                    XGI_SetPanelPower( tempah , tempbl, pVBInfo ) ;
+                    XGI_SetPanelDelay( 1,pVBInfo ) ;
+                }
+            }
+        }
+    }	/* Not 340 */
+
+
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( !( pVBInfo->SetFlag & DisableChA ) )
+        {
+            if ( pVBInfo->SetFlag & EnableChA )
+            {
+                XGINew_SetReg1( pVBInfo->Part1Port , 0x1E , 0x20 ) ;  /* Power on */
+            }
+            else
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToDualEdge ) /* SetCRT2ToLCDA ) */
+                {
+                    XGINew_SetReg1(pVBInfo->Part1Port,0x1E,0x20);  /* Power on */
+                }
+            }
+        }
+
+        if ( !( pVBInfo->SetFlag & DisableChB ) )
+        {
+            if ( ( pVBInfo->SetFlag & EnableChB ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV | SetCRT2ToRAMDAC ) ) )
+            {
+                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+                tempah &= 0xDF;
+                if ( pVBInfo->VBInfo & SetInSlaveMode )
+                {
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                        tempah |= 0x20 ;
+                }
+                XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , tempah ) ;
+                XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;
+
+
+                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+
+                if ( !( tempah & 0x80 ) )
+                    XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;   	/* BVBDOENABLE = 1 */
+
+                XGINew_SetRegAND( pVBInfo->Part1Port , 0x00 , 0x7F ) ;     	/* BScreenOFF = 0 */
+            }
+        }
+
+        if ( ( pVBInfo->SetFlag & ( EnableChA | EnableChB ) ) || ( !( pVBInfo->VBInfo & DisableCRT2Display ) ) )
+        {
+            XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x00 , ~0xE0 , 0x20 ) ;   /* shampoo 0129 */
+            if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+            {
+                if ( !XGI_DisableChISLCD(pVBInfo) )
+                {
+                    if ( XGI_EnableChISLCD( pVBInfo) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) )
+                        XGINew_SetRegAND( pVBInfo->Part4Port ,0x2A , 0x7F ) ;  	/* LVDS PLL power on */
+                }
+                XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x7F ) ;		/* LVDS Driver power on */
+            }
+        }
+
+        tempah = 0x00 ;
+
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            tempah = 0xc0 ;
+
+            if ( !( pVBInfo->VBInfo & SetSimuScanMode ) )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                    {
+                        tempah = tempah & 0x40;
+                        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                            tempah = tempah ^ 0xC0 ;
+
+                        if ( pVBInfo->SetFlag & DisableChB )
+                            tempah &= 0xBF ;
+
+                        if ( pVBInfo->SetFlag & DisableChA )
+                            tempah &= 0x7F ;
+
+                        if ( pVBInfo->SetFlag & EnableChB )
+                            tempah |= 0x40 ;
+
+                        if ( pVBInfo->SetFlag & EnableChA )
+                            tempah |= 0x80 ;
+                    }
+                }
+            }
+        }
+
+        XGINew_SetRegOR( pVBInfo->Part4Port , 0x1F , tempah ) ;          /* EnablePart4_1F */
+
+        if ( pVBInfo->SetFlag & Win9xDOSMode )
+        {
+            XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+            return ;
+        }
+
+        if ( !( pVBInfo->SetFlag & DisableChA ) )
+        {
+            XGI_VBLongWait( pVBInfo) ;
+            if ( !( pVBInfo->SetFlag & GatingCRT ) )
+            {
+                XGI_DisableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+                XGI_DisplayOn( HwDeviceExtension, pVBInfo) ;
+                XGI_VBLongWait( pVBInfo) ;
+            }
+        }
+    }	/* 301 */
+    else 	/* LVDS */
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x1E , 0x20 ) ;      	/* enable CRT2 */
+
+
+
+        tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+        if ( !( tempah & 0x80 ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;	/* BVBDOENABLE = 1 */
+
+        XGINew_SetRegAND(pVBInfo->Part1Port,0x00,0x7F);
+        XGI_DisplayOn( HwDeviceExtension, pVBInfo);
+    } /* End of VB */
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !XGI_EnableChISLCD(pVBInfo) )
+        {
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            {
+                if ( XGI_BacklightByDrv(pVBInfo) )
+                    return ;
+            }
+            else
+                return ;
+        }
+
+        if ( pVBInfo->LCDInfo & SetPWDEnable )
+        {
+            XGI_FirePWDEnable(pVBInfo) ;
+            return ;
+        }
+
+        XGI_SetPanelDelay( 2,pVBInfo ) ;
+
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {
+            tempah = 0x01 ;
+            tempbl = 0xFE ;		/* turn on backlght */
+        }
+        else
+        {
+            tempbl = 0xF7 ;
+            tempah = 0x00 ;
+        }
+        XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_DisableBridge */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempax ,
+           tempbx ,
+           tempah = 0 ,
+           tempbl = 0 ;
+
+    if ( pVBInfo->SetFlag == Win9xDOSMode )
+        return ;
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+        {
+            if ( !XGI_IsLCDON(pVBInfo) )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                    XGI_EnablePWD( pVBInfo) ;
+                else
+                {
+                    pVBInfo->LCDInfo &= ~SetPWDEnable ;
+                    XGI_DisablePWD(pVBInfo) ;
+                    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                    {
+                        tempbx = 0xFE ;  /* not 01h */
+                        tempax = 0 ;
+                    }
+                    else
+                    {
+                        tempbx = 0xF7 ;  /* not 08h */
+                        tempax = 0x08 ;
+                    }
+                    XGI_SetPanelPower( tempax , tempbx , pVBInfo) ;
+                    XGI_SetPanelDelay( 3,pVBInfo ) ;
+                }
+            }	/* end if(!XGI_IsLCDON(pVBInfo)) */
+        }
+    }
+
+/*  if ( CH7017 )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2toLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) )
+        {
+            if ( !XGI_IsLCDON(pVBInfo) )
+            {
+                if ( DISCHARGE )
+                {
+                    tempbx = XGINew_GetCH7005( 0x61 ) ;
+                    if ( tempbx < 0x01 )   //first time we power up
+                        XGINew_SetCH7005( 0x0066 ) ;	//and disable power sequence
+                    else
+                        XGINew_SetCH7005( 0x5f66 ) ; //leave VDD on - disable power
+                }
+            }
+        }
+    }        */
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B| VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempah = 0x3F ;
+        if ( !( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                {
+                    tempah = 0x7F;			/* Disable Channel A */
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                        tempah = 0xBF ;		/* Disable Channel B */
+
+                    if ( pVBInfo->SetFlag & DisableChB )
+                        tempah &= 0xBF ;		/* force to disable Cahnnel */
+
+                    if ( pVBInfo->SetFlag & DisableChA )
+                        tempah &= 0x7F ;		/* Force to disable Channel B */
+                }
+            }
+        }
+
+        XGINew_SetRegAND( pVBInfo->Part4Port , 0x1F , tempah ) ;   /* disable part4_1f */
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( ( ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+                XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x80 ) ;  /* LVDS Driver power down */
+        }
+
+        if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) ) )
+        {
+            if ( pVBInfo->SetFlag & GatingCRT )
+                XGI_EnableGatingCRT( HwDeviceExtension, pVBInfo ) ;
+            XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+        }
+
+        if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        {
+            if ( ( pVBInfo->SetFlag & DisableChA ) || ( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                XGINew_SetRegAND( pVBInfo->Part1Port , 0x1e , 0xdf ) ; 	/* Power down */
+        }
+
+        XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xdf ) ; 		/* disable TV as primary VGA swap */
+
+        if ( ( pVBInfo->VBInfo & ( SetSimuScanMode | SetCRT2ToDualEdge  ) ) )
+            XGINew_SetRegAND(pVBInfo->Part2Port,0x00,0xdf);
+
+        if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+        || ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) ) )
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; 	/* BScreenOff=1 */
+
+        if ( ( pVBInfo->SetFlag & DisableChB ) || ( pVBInfo->VBInfo & ( DisableCRT2Display | SetSimuScanMode ) )
+        || ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) || ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) ) )
+        {
+            tempah= XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ;   	/* save Part1 index 0 */
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x10 ) ; 	/* BTDAC = 1, avoid VB reset */
+            XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ;	/* disable CRT2 */
+            XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;	/* restore Part1 index 0 */
+        }
+    }
+    else /* {301} */
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV ) )
+        {
+            XGINew_SetRegOR( pVBInfo->Part1Port , 0x00 , 0x80 ) ; 	/* BScreenOff=1 */
+            XGINew_SetRegAND( pVBInfo->Part1Port , 0x1E , 0xDF ) ;	/* Disable CRT2 */
+            XGINew_SetRegAND( pVBInfo->P3c4 , 0x32 , 0xDF ) ;	/* Disable TV asPrimary VGA swap */
+        }
+
+        if ( pVBInfo->VBInfo & ( DisableCRT2Display | SetCRT2ToLCDA | SetSimuScanMode ) )
+            XGI_DisplayOff( HwDeviceExtension, pVBInfo) ;
+    }
+
+
+
+
+    if ( HwDeviceExtension->jChipType < XG40 )
+    {
+        if ( !( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) ) || ( XGI_DisableChISLCD(pVBInfo) ) || ( XGI_IsLCDON(pVBInfo) ) )
+        {
+            if ( pVBInfo->LCDInfo & SetPWDEnable )
+            {
+                if ( pVBInfo->LCDInfo & SetPWDEnable )
+                    XGI_BacklightByDrv(pVBInfo) ;
+                else
+                {
+                    XGI_SetPanelDelay( 4 ,pVBInfo) ;
+                    if ( pVBInfo->VBType & VB_XGI301LV )
+                    {
+                        tempbl = 0xFD ;
+                        tempah = 0x00 ;
+                    }
+                    else
+                    {
+                        tempbl = 0xFB ;
+                        tempah = 0x04 ;
+                    }
+                }
+            }
+            XGI_SetPanelPower( tempah , tempbl , pVBInfo) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex */
+/* Input : */
+/* Output : */
+/* Description : bx 0 : ExtNTSC */
+/* 1 : StNTSC */
+/* 2 : ExtPAL */
+/* 3 : StPAL */
+/* 4 : ExtHiTV */
+/* 5 : StHiTV */
+/* 6 : Ext525i */
+/* 7 : St525i */
+/* 8 : Ext525p */
+/* 9 : St525p */
+/* A : Ext750p */
+/* B : St750p */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx = 0 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        tempbx = 2 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode1080i )
+        tempbx = 4 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode525i )
+        tempbx = 6 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode525p )
+        tempbx = 8 ;
+    if ( pVBInfo->TVInfo & SetYPbPrMode750p )
+        tempbx = 10 ;
+    if ( pVBInfo->TVInfo & TVSimuMode )
+        tempbx++ ;
+
+    return tempbx ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OEM310Setting */
+/* Input : */
+/* Output : */
+/* Description : Customized Param. for 301 */
+/* --------------------------------------------------------------------- */
+void XGI_OEM310Setting( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    if ( pVBInfo->SetFlag & Win9xDOSMode )
+        return ;
+
+    /* GetPart1IO(); */
+    XGI_SetDelayComp(pVBInfo) ;
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        XGI_SetLCDCap(pVBInfo) ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+    {
+        /* GetPart2IO() */
+        XGI_SetPhaseIncr(pVBInfo) ;
+        XGI_SetYFilter( ModeNo , ModeIdIndex,pVBInfo ) ;
+        XGI_SetAntiFlicker( ModeNo , ModeIdIndex,pVBInfo ) ;
+
+        if ( pVBInfo->VBType&VB_XGI301)
+            XGI_SetEdgeEnhance( ModeNo , ModeIdIndex ,pVBInfo) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetDelayComp */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetDelayComp( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    UCHAR  tempah ,
+           tempbl ,
+           tempbh ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA | SetCRT2ToTV | SetCRT2ToRAMDAC ) )
+        {
+            tempbl = 0;
+            tempbh = 0;
+
+            index = XGI_GetTVPtrIndex(pVBInfo ) ;           /* Get TV Delay */
+            tempbl = pVBInfo->XGI_TVDelayList[ index ] ;
+
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                tempbl = pVBInfo->XGI_TVDelayList2[ index ] ;
+
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempbl = tempbl >> 4 ;
+/*
+            if ( pVBInfo->VBInfo & SetCRT2ToRAMDAC )
+                tempbl = CRT2Delay1 ;			// Get CRT2 Delay
+
+            if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+                tempbl = CRT2Delay2 ;
+*/
+            if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
+            {
+                index = XGI_GetLCDCapPtr(pVBInfo) ; 		/* Get LCD Delay */
+                tempbh=pVBInfo->LCDCapList[ index ].LCD_DelayCompensation ;
+
+                if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+                     tempbl = tempbh ;
+            }
+
+            tempbl  &= 0x0F ;
+            tempbh  &= 0xF0 ;
+            tempah = XGINew_GetReg1( pVBInfo->Part1Port , 0x2D ) ;
+
+            if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToLCD | SetCRT2ToTV ) )  /* Channel B */
+            {
+                tempah &= 0xF0 ;
+                tempah |= tempbl ;
+            }
+
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )		/* Channel A */
+            {
+                tempah &= 0x0F ;
+                tempah |= tempbh ;
+            }
+            XGINew_SetReg1(pVBInfo->Part1Port,0x2D,tempah);
+        }
+    }
+    else if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        tempbl = 0;
+        tempbh = 0;
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+        {
+            tempah = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_DelayCompensation ;		/* / Get LCD Delay */
+            tempah &= 0x0f ;
+            tempah = tempah << 4 ;
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2D , 0x0f , tempah ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempcx ;
+
+    tempcx = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_Capability ;
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        {        				/* 301LV/302LV only */
+            /* Set 301LV Capability */
+            XGINew_SetReg1( pVBInfo->Part4Port , 0x24 , ( UCHAR )( tempcx & 0x1F ) ) ;
+	}
+        /* VB Driving */
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~( ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) >> 8 ) , ( USHORT )( ( tempcx & ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) ) >> 8 ) ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->VBInfo & SetCRT2ToLCD )
+            XGI_SetLCDCap_B( tempcx,pVBInfo ) ;
+        else if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+            XGI_SetLCDCap_A( tempcx,pVBInfo ) ;
+
+        if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+        {
+            if ( tempcx & EnableSpectrum )
+                SetSpectrum( pVBInfo) ;
+        }
+    }
+    else      /* LVDS,CH7017 */
+        XGI_SetLCDCap_A( tempcx, pVBInfo ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_A */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
+
+    if ( temp & LCDRGB18Bit )
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x20 | ( tempcx & 0x00C0 ) ) ) ; /* Enable Dither */
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x80 ) ;
+    }
+    else
+    {
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x30 | ( tempcx & 0x00C0 ) ) ) ;
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x00 ) ;
+    }
+
+/*
+    if ( tempcx & EnableLCD24bpp )	// 24bits
+    {
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x30|(tempcx&0x00C0)) );
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x00);
+    }
+    else
+    {
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x20|(tempcx&0x00C0)) );//Enable Dither
+        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x80);
+    }
+*/
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetLCDCap_B */
+/* Input : cx -> LCD Capability */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+{
+    if ( tempcx & EnableLCD24bpp )	/* 24bits */
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x0c ) ) ;
+    else
+        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x18 ) ) ; /* Enable Dither */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : SetSpectrum */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void SetSpectrum( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT index ;
+
+    index = XGI_GetLCDCapPtr(pVBInfo) ;
+
+    XGINew_SetRegAND( pVBInfo->Part4Port , 0x30 , 0x8F ) ;   /* disable down spectrum D[4] */
+    XGI_LongWait(pVBInfo) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x20 ) ;	 /* reset spectrum */
+    XGI_LongWait(pVBInfo) ;
+
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , pVBInfo->LCDCapList[ index ].Spectrum_31 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x32 , pVBInfo->LCDCapList[ index ].Spectrum_32 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x33 , pVBInfo->LCDCapList[ index ].Spectrum_33 ) ;
+    XGINew_SetReg1( pVBInfo->Part4Port , 0x34 , pVBInfo->LCDCapList[ index ].Spectrum_34 ) ;
+    XGI_LongWait(pVBInfo) ;
+    XGINew_SetRegOR( pVBInfo->Part4Port , 0x30 , 0x40 ) ; /* enable spectrum */
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetAntiFlicker */
+/* Input : */
+/* Output : */
+/* Description : Set TV Customized Param. */
+/* --------------------------------------------------------------------- */
+void XGI_SetAntiFlicker( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempah ;
+
+    if (pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
+        return ;
+
+    tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+    tempbx &= 0xFE ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVFlickerIndex ;
+    }
+    else
+    {
+        index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVFlickerIndex ;
+    }
+
+    tempbx += index ;
+    tempah = TVAntiFlickList[ tempbx ] ;
+    tempah = tempah << 4 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x0A , 0x8F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetEdgeEnhance */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetEdgeEnhance( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempah ;
+
+
+    tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
+    tempbx &= 0xFE ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        index = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVEdgeIndex ;
+    }
+    else
+    {
+        index = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVEdgeIndex ;
+    }
+
+    tempbx += index ;
+    tempah = TVEdgeList[ tempbx ] ;
+    tempah = tempah << 5 ;
+
+    XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x3A , 0x1F , tempah ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetPhaseIncr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetPhaseIncr( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    UCHAR tempcl ,
+          tempch ;
+
+    ULONG tempData ;
+
+    XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+    tempData = TVPhaseList[ tempbx ] ;
+
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x31 , ( USHORT )( tempData & 0x000000FF ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x32 , ( USHORT )( ( tempData & 0x0000FF00 ) >> 8 ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x33 , ( USHORT )( ( tempData & 0x00FF0000 ) >> 16 ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x34 , ( USHORT )( ( tempData & 0xFF000000 ) >> 24 ) ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetYFilter */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_SetYFilter( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ,
+           index ;
+
+    UCHAR tempcl ,
+          tempch ,
+          tempal ,
+          *filterPtr ;
+
+    XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
+
+    switch( tempbx )
+    {
+        case 0x00:
+        case 0x04:
+            filterPtr = NTSCYFilter1 ;
+            break ;
+
+        case 0x01:
+            filterPtr = PALYFilter1 ;
+            break ;
+
+        case 0x02:
+        case 0x05:
+        case 0x0D:
+            filterPtr = PALMYFilter1 ;
+            break ;
+
+        case 0x03:
+            filterPtr = PALNYFilter1 ;
+            break ;
+
+        case 0x08:
+        case 0x0C:
+            filterPtr = NTSCYFilter2 ;
+            break ;
+
+        case 0x0A:
+            filterPtr = PALMYFilter2 ;
+            break ;
+
+        case 0x0B:
+            filterPtr = PALNYFilter2 ;
+            break ;
+
+        case 0x09:
+            filterPtr = PALYFilter2 ;
+            break ;
+
+        default:
+            return ;
+    }
+
+    if ( ModeNo <= 0x13 )
+        tempal = pVBInfo->SModeIDTable[ ModeIdIndex ].VB_StTVYFilterIndex ;
+    else
+        tempal = pVBInfo->EModeIDTable[ ModeIdIndex ].VB_ExtTVYFilterIndex ;
+
+    if ( tempcl == 0 )
+        index = tempal * 4;
+    else
+        index = tempal * 7;
+
+    if ( ( tempcl == 0 ) && ( tempch == 1 ) )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , 0 ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+    }
+    else
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x35 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x36 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x37 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x38 , filterPtr[ index++ ] ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x48 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x49 , filterPtr[ index++ ] ) ;
+        XGINew_SetReg1( pVBInfo->Part2Port , 0x4A , filterPtr[ index++ ] ) ;
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetTVPtrIndex2 */
+/* Input : */
+/* Output : bx 0 : NTSC */
+/* 1 : PAL */
+/* 2 : PALM */
+/* 3 : PALN */
+/* 4 : NTSC1024x768 */
+/* 5 : PAL-M 1024x768 */
+/* 6-7: reserved */
+/* cl 0 : YFilter1 */
+/* 1 : YFilter2 */
+/* ch 0 : 301A */
+/* 1 : 301B/302B/301LV/302LV */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo)
+{
+    *tempbx = 0 ;
+    *tempcl = 0 ;
+    *tempch = 0 ;
+
+    if ( pVBInfo->TVInfo & SetPALTV )
+        *tempbx = 1 ;
+
+    if ( pVBInfo->TVInfo & SetPALMTV )
+        *tempbx = 2 ;
+
+    if ( pVBInfo->TVInfo & SetPALNTV )
+        *tempbx = 3 ;
+
+    if ( pVBInfo->TVInfo & NTSC1024x768 )
+    {
+        *tempbx = 4 ;
+        if ( pVBInfo->TVInfo & SetPALMTV )
+            *tempbx = 5 ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) || ( pVBInfo->TVInfo & TVSimuMode ) )
+        {
+            *tempbx += 8 ;
+            *tempcl += 1 ;
+        }
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+        (*tempch)++ ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_SetCRT2ModeRegs */
+/* Input : */
+/* Output : */
+/* Description : Origin code for crt2group */
+/* --------------------------------------------------------------------- */
+void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbl ;
+    SHORT  tempcl ;
+
+    UCHAR  tempah ;
+
+    /* XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , 0x00 ) ; // fix write part1 index 0 BTDRAM bit Bug */
+    tempah=0;
+    if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+    {
+        tempah=XGINew_GetReg1( pVBInfo->Part1Port , 0x00 ) ;
+        tempah &= ~0x10 ;	/* BTRAMDAC */
+        tempah |=  0x40 ;	/* BTRAM */
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+        {
+            tempah=0x40;	/* BTDRAM */
+            if ( ModeNo > 0x13 )
+            {
+                tempcl = pVBInfo->ModeType ;
+                tempcl -= ModeVGA ;
+                if ( tempcl >= 0 )
+                {
+                    tempah = ( 0x008 >> tempcl ) ;	/* BT Color */
+                    if ( tempah == 0 )
+                        tempah = 1 ;
+                    tempah |= 0x040 ;
+                }
+            }
+            if ( pVBInfo->VBInfo & SetInSlaveMode )
+                tempah ^= 0x50 ;	/* BTDAC */
+        }
+    }
+
+/*	0210 shampoo
+    if ( pVBInfo->VBInfo & DisableCRT2Display )
+    {
+        tempah = 0 ;
+    }
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+    if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+    {
+        tempcl = pVBInfo->ModeType ;
+        if ( ModeNo > 0x13 )
+        {
+            tempcl -= ModeVGA ;
+            if ( ( tempcl > 0 ) || ( tempcl == 0 ) )
+            {
+                tempah=(0x008>>tempcl) ;
+                if ( tempah == 0 )
+                    tempah = 1 ;
+                tempah |= 0x040;
+            }
+        }
+        else
+        {
+            tempah = 0x040 ;
+        }
+
+        if ( pVBInfo->VBInfo & SetInSlaveMode )
+        {
+            tempah = ( tempah ^ 0x050 ) ;
+        }
+    }
+*/
+
+    XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , tempah ) ;
+    tempah = 0x08 ;
+    tempbl = 0xf0 ;
+
+    if ( pVBInfo->VBInfo & DisableCRT2Display )
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+    else
+    {
+        tempah = 0x00 ;
+        tempbl = 0xff ;
+
+        if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+        {
+            if ( ( pVBInfo->VBInfo & SetCRT2ToLCDA ) && ( !( pVBInfo->VBInfo & SetSimuScanMode ) ) )
+            {
+                tempbl &= 0xf7 ;
+                tempah |= 0x01 ;
+                XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+            }
+            else
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                {
+                    tempbl &= 0xf7 ;
+                    tempah |= 0x01 ;
+                }
+
+                if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD ) )
+                {
+                    tempbl &= 0xf8 ;
+                    tempah = 0x01 ;
+
+                    if ( !( pVBInfo->VBInfo & SetInSlaveMode ) )
+                        tempah |= 0x02 ;
+
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToRAMDAC ) )
+                    {
+                        tempah = tempah ^ 0x05 ;
+                        if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+                            tempah = tempah ^ 0x01 ;
+                    }
+
+                    if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+                        tempah |= 0x08 ;
+                    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+                }
+                else
+                    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+            }
+        }
+        else
+            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2e , tempbl , tempah ) ;
+    }
+
+    if ( pVBInfo->VBInfo & ( SetCRT2ToRAMDAC | SetCRT2ToTV | SetCRT2ToLCD | SetCRT2ToLCDA ) )
+    {
+        tempah &= ( ~0x08 ) ;
+        if ( ( pVBInfo->ModeType == ModeVGA ) && ( !( pVBInfo->VBInfo & SetInSlaveMode ) ) )
+        {
+            tempah |= 0x010 ;
+        }
+        tempah |= 0x080 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            /* if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) */
+            /* { */
+            tempah |= 0x020 ;
+            if ( ModeNo > 0x13 )
+            {
+                if ( pVBInfo->VBInfo & DriverMode )
+                    tempah = tempah ^ 0x20 ;
+            }
+        /* } */
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x0BF , tempah ) ;
+        tempah = 0 ;
+
+        if ( pVBInfo->LCDInfo & SetLCDDualLink )
+            tempah |= 0x40 ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToTV )
+        {
+            /* if ( ( !( pVBInfo->VBInfo & SetCRT2ToHiVisionTV ) ) && ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) ) ) */
+            /* { */
+                if ( pVBInfo->TVInfo & RPLLDIV2XO )
+                    tempah |= 0x40 ;
+            /* } */
+        }
+
+        if ( ( pVBInfo->LCDResInfo == Panel1280x1024 ) || ( pVBInfo->LCDResInfo == Panel1280x1024x75 ) )
+            tempah |= 0x80 ;
+
+        if ( pVBInfo->LCDResInfo == Panel1280x960 )
+            tempah |= 0x80 ;
+
+        XGINew_SetReg1( pVBInfo->Part4Port , 0x0C , tempah ) ;
+    }
+
+    if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
+    {
+        tempah = 0 ;
+        tempbl = 0xfb ;
+
+        if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+        {
+            tempbl=0xff;
+            if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+                tempah |= 0x04 ; /* shampoo 0129 */
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x13 , tempbl , tempah ) ;
+        tempah = 0x00 ;
+        tempbl = 0xcf ;
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempah |= 0x30 ;
+        }
+
+        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2c , tempbl , tempah ) ;
+        tempah = 0 ;
+        tempbl = 0x3f ;
+
+        if ( !( pVBInfo->VBInfo & DisableCRT2Display ) )
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToDualEdge )
+                tempah |= 0xc0 ;
+        }
+        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x21 , tempbl , tempah ) ;
+    }
+
+    tempah = 0 ;
+    tempbl = 0x7f ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) )
+    {
+        tempbl = 0xff ;
+        if ( !( pVBInfo->VBInfo & SetCRT2ToDualEdge ) )
+            tempah |= 0x80 ;
+    }
+
+    XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x23 , tempbl , tempah ) ;
+
+    if ( pVBInfo->VBType & ( VB_XGI302LV | VB_XGI301C ) )
+    {
+        if ( pVBInfo->LCDInfo & SetLCDDualLink )
+        {
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x27 , 0x20 ) ;
+            XGINew_SetRegOR( pVBInfo->Part4Port , 0x34 , 0x10 ) ;
+        }
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_CloseCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_CloseCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    tempbx = 0 ;
+
+    if ( pVBInfo->VBInfo & SetCRT2ToLCDA )
+        tempbx = 0x08A0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_OpenCRTC */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_OpenCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempbx ;
+
+    tempbx = 0 ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetRAMDAC2DATA */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempax ,
+           tempbx ,
+           temp1 ,
+           temp2 ,
+           modeflag = 0 ,
+           tempcx ,
+           StandTableIndex ,
+           CRT1Index ;
+
+    pVBInfo->RVBHCMAX = 1 ;
+    pVBInfo->RVBHCFACT = 1 ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+        StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
+        tempax = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 0 ] ;
+        tempbx = pVBInfo->StandTable[StandTableIndex ].CRTC[ 6 ] ;
+        temp1 = pVBInfo->StandTable[ StandTableIndex ].CRTC[ 7 ] ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+        CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
+        CRT1Index &= IndexMask ;
+        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 0 ] ;
+        temp2 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] ;
+	tempax = ( temp1 & 0xFF ) | ( ( temp2 & 0x03 ) << 8 ) ;
+        tempbx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 8 ] ;
+        tempcx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] << 8 ;
+	tempcx &= 0x0100 ;
+	tempcx = tempcx << 2 ;
+	tempbx |= tempcx;
+        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+    }
+
+    if ( temp1 & 0x01 )
+        tempbx |= 0x0100 ;
+
+    if ( temp1 & 0x20 )
+        tempbx |= 0x0200 ;
+    tempax += 5 ;
+
+    if ( modeflag & Charx8Dot )
+        tempax *= 8 ;
+    else
+        tempax *= 9 ;
+
+    pVBInfo->VGAHT = tempax ;
+    pVBInfo->HT = tempax ;
+    tempbx++ ;
+    pVBInfo->VGAVT = tempbx ;
+    pVBInfo->VT = tempbx ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetColorDepth */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetColorDepth(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT ColorDepth[ 6 ] = { 1 , 2 , 4 , 4 , 6 , 8 } ;
+    SHORT  index ;
+    USHORT modeflag ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
+    }
+
+    index=(modeflag&ModeInfoFlag)-ModeEGA;
+
+    if ( index < 0 )
+        index = 0 ;
+
+    return( ColorDepth[ index ] ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_UnLockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_UnLockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2f , 0xFF , 0x01 ) ;
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LockCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+{
+
+    XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2F , 0xFE , 0x00 ) ;
+
+
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_EnableCRT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_EnableCRT2( PVB_DEVICE_INFO pVBInfo)
+{
+    XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1E , 0xFF , 0x20 ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ,
+           j ;
+
+    ULONG temp ,
+          flag ;
+
+    flag = 0 ;
+//printk("XGINew_LCD_Wait_Time");
+//return;
+    for( i = 0 ; i < DelayTime ; i++ )
+    {
+        for( j = 0 ; j < 66 ; j++ )
+        {
+
+            temp =  XGINew_GetReg3( 0x61 ) ;
+
+            //temp &= 0x10000000;
+            temp &= 0x10;
+            if ( temp == flag )
+                continue ;
+
+            flag = temp ;
+        }
+    }
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_BridgeIsOn */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT flag ;
+
+    if ( pVBInfo->IF_DEF_LVDS == 1 )
+    {
+        return( 1 ) ;
+    }
+    else
+    {
+        flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x00 ) ;
+        if ( ( flag == 1 ) || ( flag == 2 ) )
+            return( 1 ) ;	/* 301b */
+        else
+            return( 0 ) ;
+    }
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_LongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_LongWait(PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT i ;
+
+    i = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
+
+    if ( !( i & 0xC0 ) )
+    {
+        for( i = 0 ; i < 0xFFFF ; i++ )
+        {
+            if ( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+                break ;
+        }
+
+        for( i = 0 ; i < 0xFFFF ; i++ )
+        {
+            if ( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x08 ) )
+                break ;
+	}
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_VBLongWait */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGI_VBLongWait( PVB_DEVICE_INFO pVBInfo )
+{
+    USHORT tempal ,
+           temp ,
+           i ,
+           j ;
+return ;
+    if ( !( pVBInfo->VBInfo & SetCRT2ToTV ) )
+    {
+        temp = 0 ;
+        for( i = 0 ; i < 3 ; i++ )
+        {
+            for( j = 0 ; j < 100 ; j++ )
+            {
+                tempal = XGINew_GetReg2( pVBInfo->P3da ) ;
+                if ( temp & 0x01 )
+                {			/* VBWaitMode2 */
+                    if ( ( tempal & 0x08 ) )
+                    {
+                        continue ;
+                    }
+
+                    if ( !( tempal & 0x08 ) )
+                    {
+                        break ;
+                    }
+                }
+                else
+                {			/* VBWaitMode1 */
+                    if ( !( tempal & 0x08 ) )
+                    {
+                        continue ;
+                    }
+
+                    if ( ( tempal & 0x08 ) )
+                    {
+                        break ;
+                    }
+                }
+            }
+            temp = temp ^ 0x01 ;
+        }
+    }
+    else
+    {
+        XGI_LongWait(pVBInfo) ;
+    }
+    return ;
+}
+
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVGAHT2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVGAHT2( PVB_DEVICE_INFO pVBInfo )
+{
+    ULONG tempax ,
+          tempbx ;
+
+    tempbx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) * pVBInfo->RVBHCMAX ) & 0xFFFF ;
+    tempax = ( pVBInfo->VT - pVBInfo->VDE ) * pVBInfo->RVBHCFACT ;
+    tempax = ( tempax * pVBInfo->HT ) /tempbx ;
+
+    return( ( USHORT )tempax ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGI_GetVCLK2Ptr */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+USHORT XGI_GetVCLK2Ptr( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+{
+    USHORT tempbx ;
+
+    USHORT LCDXlat1VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    USHORT LCDXlat2VCLK[ 4 ] = { VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 } ;
+    USHORT LVDSXlat1VCLK[ 4 ] = { VCLK40 , VCLK40 , VCLK40 , VCLK40 } ;
+    USHORT LVDSXlat2VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    USHORT LVDSXlat3VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+
+    USHORT CRT2Index , VCLKIndex ;
+    USHORT modeflag , resinfo ;
+    UCHAR *CHTVVCLKPtr = NULL ;
+
+    if ( ModeNo <= 0x13 )
+    {
+        modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
+        resinfo = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ResInfo ;
+        CRT2Index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
+    }
+    else
+    {
+        modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;     /* si+Ext_ResInfo */
+        resinfo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_RESINFO ;
+        CRT2Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT2CRTC ;
+    }
+
+    if ( pVBInfo->IF_DEF_LVDS == 0 )
+    {
+        CRT2Index = CRT2Index >> 6 ;        /*  for LCD */
+        if ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) )	 /*301b*/
+        {
+            if ( pVBInfo->LCDResInfo != Panel1024x768 )
+            {
+                VCLKIndex = LCDXlat2VCLK[ CRT2Index ] ;
+            }
+            else
+            {
+                 VCLKIndex = LCDXlat1VCLK[ CRT2Index ] ;
+            }
+        }
+        else	/* for TV */
+        {
+            if ( pVBInfo->VBInfo & SetCRT2ToTV )
+            {
+                if ( pVBInfo->VBInfo & SetCRT2ToHiVisionTV )
+                {
+                    if ( pVBInfo->SetFlag & RPLLDIV2XO )
+                    {
+                        VCLKIndex = HiTVVCLKDIV2 ;
+
+
+                            VCLKIndex += 25 ;
+
+                    }
+                    else
+                    {
+                        VCLKIndex = HiTVVCLK ;
+
+
+                            VCLKIndex += 25 ;
+
+                    }
+
+                    if ( pVBInfo->SetFlag & TVSimuMode )
+                    {
+                        if( modeflag & Charx8Dot )
+                        {
+                            VCLKIndex = HiTVSimuVCLK ;
+
+
+                                VCLKIndex += 25 ;
+
+                        }
+                        else
+                        {
+                            VCLKIndex = HiTVTextVCLK ;
+
+
+                                VCLKIndex += 25 ;
+
+                        }
+                    }
+
+                    if ( pVBInfo->VBType & VB_XGI301LV )	/* 301lv */
+                    {
+                        if ( !( pVBInfo->VBExtInfo == VB_YPbPr1080i ) )
+                        {
+                            VCLKIndex = YPbPr750pVCLK ;
+                            if ( !( pVBInfo->VBExtInfo == VB_YPbPr750p ) )
+                            {
+                                VCLKIndex = YPbPr525pVCLK ;
+                                if ( !( pVBInfo->VBExtInfo == VB_YPbPr525p ) )
+                                {
+                                    VCLKIndex = YPbPr525iVCLK_2 ;
+                                    if ( !( pVBInfo->SetFlag & RPLLDIV2XO ) )
+                                        VCLKIndex = YPbPr525iVCLK ;
+                                }
+                            }
+                        }
+                    }
+                }
+                else
+                {
+                    if ( pVBInfo->VBInfo & SetCRT2ToTV )
+                    {
+                        if ( pVBInfo->SetFlag & RPLLDIV2XO )
+			{
+                            VCLKIndex = TVVCLKDIV2 ;
+
+
+                            VCLKIndex += 25 ;
+
+                        }
+                        else
+                        {
+                            VCLKIndex = TVVCLK ;
+
+
+                            VCLKIndex += 25 ;
+
+                        }
+                    }
+                }
+            }
+            else
+            {	/* for CRT2 */
+                VCLKIndex = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;	/* Port 3cch */
+		VCLKIndex = ( ( VCLKIndex >> 2 ) & 0x03 ) ;
+                if ( ModeNo > 0x13 )
+                {
+                    VCLKIndex = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRTVCLK ;	/* di+Ext_CRTVCLK */
+                    VCLKIndex &= IndexMask ;
+                }
+            }
+        }
+    }
+    else
+    {		/* LVDS */
+        if ( ModeNo <= 0x13 )
+            VCLKIndex = CRT2Index ;
+	else
+	    VCLKIndex = CRT2Index ;
+
+        if ( pVBInfo->IF_DEF_CH7005 == 1 )
+        {
+            if ( !( pVBInfo->VBInfo & SetCRT2ToLCD ) )
+            {
+                VCLKIndex &= 0x1f ;
+		tempbx = 0 ;
+
+                if ( pVBInfo->VBInfo & SetPALTV )
+                    tempbx += 2 ;
+
+                if ( pVBInfo->VBInfo & SetCHTVOverScan )
+                    tempbx += 1 ;
+
+                switch( tempbx )
+                {
+                    case 0:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKUNTSC ;
+                        break ;
+                    case 1:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKONTSC ;
+                        break;
+                    case 2:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKUPAL ;
+                        break ;
+                    case 3:
+                        CHTVVCLKPtr = pVBInfo->CHTVVCLKOPAL ;
+                        break ;
+                    default:
+                        break ;
+                }
+
+                VCLKIndex = CHTVVCLKPtr[ VCLKIndex ] ;
+            }
+        }
+        else
+        {
+            VCLKIndex = VCLKIndex >> 6 ;
+            if ( ( pVBInfo->LCDResInfo == Panel800x600 ) || ( pVBInfo->LCDResInfo == Panel320x480 ) )
+                VCLKIndex = LVDSXlat1VCLK[ VCLKIndex ] ;
+            else if ( ( pVBInfo->LCDResInfo == Panel1024x768 ) || ( pVBInfo->LCDResInfo == Panel1024x768x75 ) )
+                VCLKIndex = LVDSXlat2VCLK[ VCLKIndex ] ;
+            else
+                VCLKIndex = LVDSXlat3VCLK[ VCLKIndex ] ;
+        }
+    }
+    /* VCLKIndex = VCLKIndex&IndexMask ; */
+
+
+
+    return( VCLKIndex ) ;
+}
+
diff --git a/drivers/staging/xgifb/vb_setmode.h b/drivers/staging/xgifb/vb_setmode.h
new file mode 100644
index 0000000..09753d7
--- /dev/null
+++ b/drivers/staging/xgifb/vb_setmode.h
@@ -0,0 +1,40 @@
+#ifndef  _VBSETMODE_
+#define  _VBSETMODE_
+
+extern   void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO);
+extern   void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_LongWait( PVB_DEVICE_INFO );
+extern   void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO,  PVB_DEVICE_INFO  );
+extern   void     XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void  	  XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern   void     XGI_DisplayOn( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
+extern   void     XGI_GetVBType(PVB_DEVICE_INFO);
+extern   void     XGI_SenseCRT1(PVB_DEVICE_INFO );
+extern   void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+extern   void     XGI_SetCRT1Offset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
+extern   void     XGI_WaitDisply( PVB_DEVICE_INFO );
+extern   USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+
+extern   BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+
+extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_BridgeIsOn( PVB_DEVICE_INFO );
+extern   BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO);
+extern   USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+
+extern   void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
+extern   BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern   void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
+extern   USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo);
+
+#endif
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
new file mode 100644
index 0000000..bb25c0e
--- /dev/null
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -0,0 +1,534 @@
+#ifndef _VB_STRUCT_
+#define _VB_STRUCT_
+
+#ifdef _INITNEW_
+#define EXTERN
+#else
+#define EXTERN extern
+#endif
+
+
+
+
+typedef struct _XGI_PanelDelayTblStruct
+{
+ UCHAR timer[2];
+} XGI_PanelDelayTblStruct;
+
+typedef struct _XGI_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LCDDataStruct;
+
+
+typedef struct _XGI_LVDSCRT1HDataStruct
+{
+ UCHAR Reg[8];
+} XGI_LVDSCRT1HDataStruct;
+typedef struct _XGI_LVDSCRT1VDataStruct
+{
+ UCHAR Reg[7];
+} XGI_LVDSCRT1VDataStruct;
+
+
+typedef struct _XGI_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+ UCHAR RY1COE;
+ UCHAR RY2COE;
+ UCHAR RY3COE;
+ UCHAR RY4COE;
+} XGI_TVDataStruct;
+
+typedef struct _XGI_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI_LVDSDataStruct;
+
+typedef struct _XGI_LVDSDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDVDES;
+} XGI_LVDSDesStruct;
+
+typedef struct _XGI_LVDSCRT1DataStruct
+{
+ UCHAR CR[15];
+} XGI_LVDSCRT1DataStruct;
+
+/*add for LCDA*/
+
+
+typedef struct _XGI_StStruct
+{
+ UCHAR St_ModeID;
+ USHORT St_ModeFlag;
+ UCHAR St_StTableIndex;
+ UCHAR St_CRT2CRTC;
+ UCHAR St_CRT2CRTC2;
+ UCHAR St_ResInfo;
+ UCHAR VB_StTVFlickerIndex;
+ UCHAR VB_StTVEdgeIndex;
+ UCHAR VB_StTVYFilterIndex;
+} XGI_StStruct;
+
+typedef struct _XGI_StandTableStruct
+{
+ UCHAR CRT_COLS;
+ UCHAR ROWS;
+ UCHAR CHAR_HEIGHT;
+ USHORT CRT_LEN;
+ UCHAR SR[4];
+ UCHAR MISC;
+ UCHAR CRTC[0x19];
+ UCHAR ATTR[0x14];
+ UCHAR GRC[9];
+} XGI_StandTableStruct;
+
+typedef struct _XGI_ExtStruct
+{
+ UCHAR Ext_ModeID;
+ USHORT Ext_ModeFlag;
+ USHORT Ext_ModeInfo;
+ USHORT Ext_Point;
+ USHORT Ext_VESAID;
+ UCHAR Ext_VESAMEMSize;
+ UCHAR Ext_RESINFO;
+ UCHAR VB_ExtTVFlickerIndex;
+ UCHAR VB_ExtTVEdgeIndex;
+ UCHAR VB_ExtTVYFilterIndex;
+ UCHAR REFindex;
+} XGI_ExtStruct;
+
+typedef struct _XGI_Ext2Struct
+{
+ USHORT Ext_InfoFlag;
+ UCHAR Ext_CRT1CRTC;
+ UCHAR Ext_CRTVCLK;
+ UCHAR Ext_CRT2CRTC;
+ UCHAR Ext_CRT2CRTC2;
+ UCHAR  ModeID;
+ USHORT XRes;
+ USHORT YRes;
+ /* USHORT ROM_OFFSET; */
+} XGI_Ext2Struct;
+
+
+typedef struct _XGI_MCLKDataStruct
+{
+ UCHAR SR28,SR29,SR2A;
+ USHORT CLOCK;
+} XGI_MCLKDataStruct;
+
+typedef struct _XGI_ECLKDataStruct
+{
+ UCHAR SR2E,SR2F,SR30;
+ USHORT CLOCK;
+} XGI_ECLKDataStruct;
+
+typedef struct _XGI_VCLKDataStruct
+{
+ UCHAR SR2B,SR2C;
+ USHORT CLOCK;
+} XGI_VCLKDataStruct;
+
+typedef struct _XGI_VBVCLKDataStruct
+{
+ UCHAR Part4_A,Part4_B;
+ USHORT CLOCK;
+} XGI_VBVCLKDataStruct;
+
+typedef struct _XGI_StResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+} XGI_StResInfoStruct;
+
+typedef struct _XGI_ModeResInfoStruct
+{
+ USHORT HTotal;
+ USHORT VTotal;
+ UCHAR  XChar;
+ UCHAR  YChar;
+} XGI_ModeResInfoStruct;
+
+typedef struct _XGI_LCDNBDesStruct
+{
+  UCHAR NB[12];
+} XGI_LCDNBDesStruct;
+ /*add for new UNIVGABIOS*/
+typedef struct _XGI_LCDDesStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI_LCDDesStruct;
+
+typedef struct _XGI_LCDDataTablStruct
+{
+ UCHAR  PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_LCDDataTablStruct;
+
+typedef struct _XGI_TVTablDataStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI_TVDataTablStruct;
+
+typedef struct _XGI330_LCDDesDataStruct
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+} XGI330_LCDDataDesStruct;
+
+
+typedef struct _XGI330_LVDSDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LVDSDataStruct;
+
+typedef struct _XGI330_LCDDesDataStruct2
+{
+ USHORT LCDHDES;
+ USHORT LCDHRS;
+ USHORT LCDVDES;
+ USHORT LCDVRS;
+ USHORT LCDHSync;
+ USHORT LCDVSync;
+} XGI330_LCDDataDesStruct2;
+
+typedef struct _XGI330_LCDDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_LCDDataStruct;
+
+
+typedef struct _XGI330_TVDataStruct
+{
+ USHORT RVBHCMAX;
+ USHORT RVBHCFACT;
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT TVHDE;
+ USHORT TVVDE;
+ USHORT RVBHRS;
+ UCHAR FlickerMode;
+ USHORT HALFRVBHRS;
+} XGI330_TVDataStruct;
+
+typedef struct _XGI330_LCDDataTablStruct
+{
+ UCHAR  PANELID;
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_LCDDataTablStruct;
+
+typedef struct _XGI330_TVDataTablStruct
+{
+ USHORT MASK;
+ USHORT CAP;
+ USHORT DATAPTR;
+} XGI330_TVDataTablStruct;
+
+
+typedef struct _XGI330_CHTVDataStruct
+{
+ USHORT VGAHT;
+ USHORT VGAVT;
+ USHORT LCDHT;
+ USHORT LCDVT;
+} XGI330_CHTVDataStruct;
+
+typedef struct _XGI_TimingHStruct
+{
+  UCHAR data[8];
+} XGI_TimingHStruct;
+
+typedef struct _XGI_TimingVStruct
+{
+  UCHAR data[7];
+} XGI_TimingVStruct;
+
+typedef struct _XGI_CH7007TV_TimingHStruct
+{
+  UCHAR data[10];
+} XGI_CH7007TV_TimingHStruct;
+
+typedef struct _XGI_CH7007TV_TimingVStruct
+{
+  UCHAR data[10];
+} XGI_CH7007TV_TimingVStruct;
+
+typedef struct _XGI_XG21CRT1Struct
+{
+ UCHAR ModeID,CR02,CR03,CR15,CR16;
+} XGI_XG21CRT1Struct;
+
+typedef struct _XGI330_CHTVRegDataStruct
+{
+ UCHAR Reg[16];
+} XGI330_CHTVRegDataStruct;
+
+typedef struct _XGI330_LCDCapStruct
+{
+ 		UCHAR      LCD_ID;
+                USHORT     LCD_Capability;
+                UCHAR      LCD_SetFlag;
+                UCHAR      LCD_DelayCompensation;
+                UCHAR      LCD_HSyncWidth;
+                UCHAR      LCD_VSyncWidth;
+                UCHAR      LCD_VCLK;
+                UCHAR      LCDA_VCLKData1;
+                UCHAR      LCDA_VCLKData2;
+                UCHAR      LCUCHAR_VCLKData1;
+                UCHAR      LCUCHAR_VCLKData2;
+                UCHAR      PSC_S1;
+                UCHAR      PSC_S2;
+                UCHAR      PSC_S3;
+                UCHAR      PSC_S4;
+                UCHAR      PSC_S5;
+                UCHAR      PWD_2B;
+                UCHAR      PWD_2C;
+                UCHAR      PWD_2D;
+                UCHAR      PWD_2E;
+                UCHAR      PWD_2F;
+                UCHAR      Spectrum_31;
+                UCHAR      Spectrum_32;
+                UCHAR      Spectrum_33;
+                UCHAR      Spectrum_34;
+} XGI330_LCDCapStruct;
+
+typedef struct _XGI21_LVDSCapStruct
+{
+                USHORT     LVDS_Capability;
+                USHORT     LVDSHT;
+                USHORT     LVDSVT;
+                USHORT     LVDSHDE;
+                USHORT     LVDSVDE;
+                USHORT     LVDSHFP;
+                USHORT     LVDSVFP;
+                USHORT     LVDSHSYNC;
+                USHORT     LVDSVSYNC;
+                UCHAR      VCLKData1;
+                UCHAR      VCLKData2;
+                UCHAR      PSC_S1;
+                UCHAR      PSC_S2;
+                UCHAR      PSC_S3;
+                UCHAR      PSC_S4;
+                UCHAR      PSC_S5;
+} XGI21_LVDSCapStruct;
+
+typedef struct _XGI_CRT1TableStruct
+{
+  UCHAR CR[16];
+} XGI_CRT1TableStruct;
+
+
+typedef struct _XGI330_VCLKDataStruct
+{
+    UCHAR SR2B,SR2C;
+    USHORT CLOCK;
+} XGI330_VCLKDataStruct;
+
+typedef struct _XGI301C_Tap4TimingStruct
+{
+    USHORT DE;
+    UCHAR  Reg[64];   /* C0-FF */
+} XGI301C_Tap4TimingStruct;
+
+typedef struct _XGI_New_StandTableStruct
+{
+	UCHAR  CRT_COLS;
+	UCHAR  ROWS;
+	UCHAR  CHAR_HEIGHT;
+	USHORT CRT_LEN;
+	UCHAR  SR[4];
+	UCHAR  MISC;
+	UCHAR  CRTC[0x19];
+	UCHAR  ATTR[0x14];
+	UCHAR  GRC[9];
+} XGI_New_StandTableStruct;
+
+typedef UCHAR DRAM8Type[8];
+typedef UCHAR DRAM4Type[4];
+typedef UCHAR DRAM32Type[32];
+typedef UCHAR DRAM2Type[2];
+
+typedef struct _VB_DEVICE_INFO  VB_DEVICE_INFO;
+typedef VB_DEVICE_INFO *	PVB_DEVICE_INFO;
+
+struct _VB_DEVICE_INFO
+{
+    BOOLEAN  ISXPDOS;
+    ULONG   P3c4,P3d4,P3c0,P3ce,P3c2,P3cc;
+    ULONG   P3ca,P3c6,P3c7,P3c8,P3c9,P3da;
+    ULONG   Part0Port,Part1Port,Part2Port;
+    ULONG   Part3Port,Part4Port,Part5Port;
+    USHORT   RVBHCFACT,RVBHCMAX,RVBHRS;
+    USHORT   VGAVT,VGAHT,VGAVDE,VGAHDE;
+    USHORT   VT,HT,VDE,HDE;
+    USHORT   LCDHRS,LCDVRS,LCDHDES,LCDVDES;
+
+    USHORT   ModeType;
+    USHORT   IF_DEF_LVDS,IF_DEF_TRUMPION,IF_DEF_DSTN;/* ,IF_DEF_FSTN; add for dstn */
+    USHORT   IF_DEF_CRT2Monitor,IF_DEF_VideoCapture;
+    USHORT   IF_DEF_LCDA,IF_DEF_CH7017,IF_DEF_YPbPr,IF_DEF_ScaleLCD,IF_DEF_OEMUtil,IF_DEF_PWD;
+    USHORT   IF_DEF_ExpLink;
+    USHORT   IF_DEF_CH7005,IF_DEF_HiVision;
+    USHORT   IF_DEF_CH7007; /* Billy 2007/05/03 */
+    USHORT   LCDResInfo,LCDTypeInfo, VBType;/*301b*/
+    USHORT   VBInfo,TVInfo,LCDInfo, Set_VGAType;
+    USHORT   VBExtInfo;/*301lv*/
+    USHORT   SetFlag;
+    USHORT   NewFlickerMode;
+    USHORT   SelectCRT2Rate;
+
+    PUCHAR ROMAddr;
+    PUCHAR FBAddr;
+    ULONG BaseAddr;
+    ULONG RelIO;
+
+    DRAM4Type  *CR6B;
+    DRAM4Type  *CR6E;
+    DRAM32Type *CR6F;
+    DRAM2Type  *CR89;
+
+    DRAM8Type  *SR15; /* pointer : point to array */
+    DRAM8Type  *CR40;
+    UCHAR  *pSoftSetting;
+    UCHAR  *pOutputSelect;
+
+    USHORT *pRGBSenseData;
+    USHORT *pRGBSenseData2; /*301b*/
+    USHORT *pVideoSenseData;
+    USHORT *pVideoSenseData2;
+    USHORT *pYCSenseData;
+    USHORT *pYCSenseData2;
+
+    UCHAR  *pSR07;
+    UCHAR  *CR49;
+    UCHAR  *pSR1F;
+    UCHAR  *AGPReg;
+    UCHAR  *SR16;
+    UCHAR  *pSR21;
+    UCHAR  *pSR22;
+    UCHAR  *pSR23;
+    UCHAR  *pSR24;
+    UCHAR  *SR25;
+    UCHAR  *pSR31;
+    UCHAR  *pSR32;
+    UCHAR  *pSR33;
+    UCHAR  *pSR36;      /* alan 12/07/2006 */
+    UCHAR  *pCRCF;
+    UCHAR  *pCRD0;      /* alan 12/07/2006 */
+    UCHAR  *pCRDE;      /* alan 12/07/2006 */
+    UCHAR  *pCR8F;      /* alan 12/07/2006 */
+    UCHAR  *pSR40;      /* alan 12/07/2006 */
+    UCHAR  *pSR41;      /* alan 12/07/2006 */
+    UCHAR  *pDVOSetting;
+    UCHAR  *pCR2E;
+    UCHAR  *pCR2F;
+    UCHAR  *pCR46;
+    UCHAR  *pCR47;
+    UCHAR  *pCRT2Data_1_2;
+    UCHAR  *pCRT2Data_4_D;
+    UCHAR  *pCRT2Data_4_E;
+    UCHAR  *pCRT2Data_4_10;
+    XGI_MCLKDataStruct  *MCLKData;
+    XGI_ECLKDataStruct  *ECLKData;
+
+    UCHAR   *XGI_TVDelayList;
+    UCHAR   *XGI_TVDelayList2;
+    UCHAR   *CHTVVCLKUNTSC;
+    UCHAR   *CHTVVCLKONTSC;
+    UCHAR   *CHTVVCLKUPAL;
+    UCHAR   *CHTVVCLKOPAL;
+    UCHAR   *NTSCTiming;
+    UCHAR   *PALTiming;
+    UCHAR   *HiTVExtTiming;
+    UCHAR   *HiTVSt1Timing;
+    UCHAR   *HiTVSt2Timing;
+    UCHAR   *HiTVTextTiming;
+    UCHAR   *YPbPr750pTiming;
+    UCHAR   *YPbPr525pTiming;
+    UCHAR   *YPbPr525iTiming;
+    UCHAR   *HiTVGroup3Data;
+    UCHAR   *HiTVGroup3Simu;
+    UCHAR   *HiTVGroup3Text;
+    UCHAR   *Ren525pGroup3;
+    UCHAR   *Ren750pGroup3;
+    UCHAR   *ScreenOffset;
+    UCHAR   *pXGINew_DRAMTypeDefinition;
+    UCHAR   *pXGINew_I2CDefinition ;
+    UCHAR   *pXGINew_CR97 ;
+
+    XGI330_LCDCapStruct  *LCDCapList;
+    XGI21_LVDSCapStruct  *XG21_LVDSCapList;
+
+    XGI_TimingHStruct  *TimingH;
+    XGI_TimingVStruct  *TimingV;
+
+    XGI_StStruct          *SModeIDTable;
+    XGI_StandTableStruct  *StandTable;
+    XGI_ExtStruct         *EModeIDTable;
+    XGI_Ext2Struct        *RefIndex;
+    /* XGINew_CRT1TableStruct *CRT1Table; */
+    XGI_CRT1TableStruct    *XGINEWUB_CRT1Table;
+    XGI_VCLKDataStruct    *VCLKData;
+    XGI_VBVCLKDataStruct  *VBVCLKData;
+    XGI_StResInfoStruct   *StResInfo;
+    XGI_ModeResInfoStruct *ModeResInfo;
+    XGI_XG21CRT1Struct	  *UpdateCRT1;
+};  /* _VB_DEVICE_INFO */
+
+
+typedef struct
+{
+    USHORT    Horizontal_ACTIVE;
+    USHORT    Horizontal_FP;
+    USHORT    Horizontal_SYNC;
+    USHORT    Horizontal_BP;
+    USHORT    Vertical_ACTIVE;
+    USHORT    Vertical_FP;
+    USHORT    Vertical_SYNC;
+    USHORT    Vertical_BP;
+    double    DCLK;
+    UCHAR     FrameRate;
+    UCHAR     Interlace;
+    USHORT    Margin;
+} TimingInfo;
+
+#define _VB_STRUCT_
+#endif /* _VB_STRUCT_ */
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
new file mode 100644
index 0000000..781caef
--- /dev/null
+++ b/drivers/staging/xgifb/vb_table.h
@@ -0,0 +1,4406 @@
+#define  Tap4
+
+
+XGI_MCLKDataStruct XGI330New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_MCLKDataStruct XGI340New_MCLKData[]=
+{
+ { 0x16,0x01,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_MCLKDataStruct XGI27New_MCLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x19,0x02,0x01,124},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+XGI_ECLKDataStruct XGI330_ECLKData[]=
+{
+ { 0x7c,0x08,0x01,200},
+ { 0x7c,0x08,0x01,200},
+ { 0x7C,0x08,0x80,200},
+ { 0x79,0x06,0x80,250},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300},
+ { 0x29,0x01,0x81,300}
+};
+//yilin modify for xgi20
+XGI_ECLKDataStruct XGI340_ECLKData[]=
+{
+ { 0x5c,0x23,0x01,166},
+ { 0x55,0x84,0x01,123},
+ { 0x7C,0x08,0x01,200},
+ { 0x79,0x06,0x01,250},
+ { 0x29,0x01,0x81,301},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166},
+ { 0x5c,0x23,0x01,166}
+};
+
+
+
+UCHAR XGI340_SR13[4][8]={
+{0x35,0x45,0xb1,0x00,0x00,0x00,0x00,0x00},/* SR13 */
+{0x41,0x51,0x5c,0x00,0x00,0x00,0x00,0x00},/* SR14 */
+{0x31,0x42,0x42,0x00,0x00,0x00,0x00,0x00},/* SR18 */
+{0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00}/* SR1B */
+};
+
+UCHAR XGI340_cr41[24][8]=
+{{0x20,0x50,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0xa4,0xa4,0x00,0x00,0x00,0x00,0x00},
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x44,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x48,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x54,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x0a,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x44,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x10,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x11,0x0a,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x05,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x40,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xB5,0x13,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0x90,0x90,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x67,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x88,0xcc,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x44,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x48,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x54,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x54,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x0a,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x10,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x11,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0x00,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x05,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+
+
+#if 0
+UCHAR XGI27_cr41[24][8]=
+{
+{0x20,0x60,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
+{0x04,0x44,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
+{0x04,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
+{0xb5,0x03,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
+{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
+{0xa4,0x1C,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
+{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
+{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
+{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
+{0x48,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
+{0x77,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
+{0x88,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
+{0x44,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
+{0x44,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
+{0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
+{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
+{0x0A,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
+{0x0C,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
+{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
+{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
+{0x03,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
+};
+#endif
+UCHAR XGI340_CR6B[8][4]={
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0xaa,0xaa,0xaa,0xaa},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6E[8][4]={
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR6F[8][32]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+UCHAR XGI340_CR89[8][2]={
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00},
+{0x00,0x00}
+};
+			 /* CR47,CR48,CR49,CR4A,CR4B,CR4C,CR70,CR71,CR74,CR75,CR76,CR77 */
+UCHAR XGI340_AGPReg[12]={0x28,0x23,0x00,0x20,0x00,0x20,0x00,0x05,0xd0,0x10,0x10,0x00};
+
+UCHAR XGI340_SR16[4]={0x03,0x83,0x03,0x83};
+
+UCHAR XGI330_SR15_1[8][8]={
+{0x0,0x0,0x00,0x00,0x20,0x20,0x00,0x00},
+{0x5,0x15,0x15,0x15,0x15,0x15,0x00,0x00},
+{0xba,0xba,0xba,0xba,0xBA,0xBA,0x00,0x00},
+{0x55,0x57,0x57,0xAB,0xAB,0xAB,0x00,0x00},
+{0x60,0x34,0x34,0x34,0x34,0x34,0x00,0x00},
+{0x0,0x80,0x80,0x80,0x83,0x83,0x00,0x00},
+{0x50,0x50,0x50,0x3C,0x3C,0x3C,0x00,0x00},
+{0x0,0xa5,0xfb,0xf6,0xF6,0xF6,0x00,0x00}
+};
+
+UCHAR XGI330_cr40_1[15][8]={
+{0x66,0x40,0x40,0x28,0x24,0x24,0x00,0x00},
+{0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00},
+{0x00,0xf0,0xf0,0xf0,0xF0,0xF0,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x10,0x10,0x10,0x10,0x20,0x20,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x88,0x88,0x88,0xAA,0xAC,0xAC,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x77,0x77,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+{0x00,0xA2,0x00,0x00,0xA2,0xA2,0x00,0x00},
+};
+
+UCHAR XGI330_sr25[]={0x00,0x0};
+UCHAR XGI330_sr31=0xc0;
+UCHAR XGI330_sr32=0x11;
+UCHAR XGI330_SR33=0x00;
+UCHAR XG40_CRCF=0x13;
+UCHAR XG40_DRAMTypeDefinition=0xFF ;
+
+XGI_StStruct XGI330_SModeIDTable[]=
+{
+ {0x01,0x9208,0x01,0x00,0x10,0x00,0x00,0x01,0x00},
+ {0x01,0x1210,0x14,0x01,0x00,0x01,0x00,0x01,0x00},
+ {0x01,0x1010,0x17,0x02,0x11,0x00,0x00,0x01,0x01},
+ {0x03,0x8208,0x03,0x00,0x14,0x00,0x00,0x01,0x02},
+ {0x03,0x0210,0x16,0x01,0x04,0x01,0x00,0x01,0x02},
+ {0x03,0x0010,0x18,0x02,0x15,0x00,0x00,0x01,0x03},
+ {0x05,0x9209,0x05,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x06,0x8209,0x06,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x07,0x0000,0x07,0x03,0x05,0x03,0x00,0x01,0x03},
+ {0x07,0x0000,0x19,0x02,0x15,0x02,0x00,0x01,0x03},
+ {0x0d,0x920a,0x0d,0x00,0x10,0x00,0x00,0x00,0x04},
+ {0x0e,0x820a,0x0e,0x00,0x14,0x00,0x00,0x00,0x05},
+ {0x0f,0x0202,0x11,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x10,0x0212,0x12,0x01,0x04,0x01,0x00,0x00,0x05},
+ {0x11,0x0212,0x1a,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x12,0x0212,0x1b,0x04,0x24,0x04,0x00,0x00,0x05},
+ {0x13,0x021b,0x1c,0x00,0x14,0x00,0x00,0x00,0x04},
+ {0x12,0x0010,0x18,0x02,0x24,0x02,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0x12,0x0210,0x18,0x01,0x24,0x01,0x00,0x00,0x05},/* St_CRT2CRTC2 not sure */
+ {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+
+XGI_ExtStruct  XGI330_EModeIDTable[]=
+{
+ {0x6a,0x2212,0x0407,0x3a81,0x0102,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x2e,0x0a1b,0x0306,0x3a57,0x0101,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x2f,0x0a1b,0x0305,0x3a50,0x0100,0x08,0x05,0x00,0x00,0x05,0x05},
+ {0x30,0x2a1b,0x0407,0x3a81,0x0103,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x31,0x0a1b,0x030d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x32,0x0a1b,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x33,0x0a1d,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x34,0x2a1d,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x35,0x0a1f,0x0a0d,0x3b85,0x0000,0x08,0x0d,0x00,0x00,0x06,0x3d},
+ {0x36,0x2a1f,0x0a0e,0x3b8c,0x0000,0x08,0x0e,0x00,0x00,0x06,0x3e},
+ {0x37,0x0212,0x0508,0x3aab,0x0104,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x38,0x0a1b,0x0508,0x3aab,0x0105,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x3a,0x0e3b,0x0609,0x3adc,0x0107,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x3c,0x0e3b,0x070a,0x3af2,0x0130,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE [2003/10/07] */
+ {0x3d,0x0e7d,0x070a,0x3af2,0x0131,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE */
+ {0x40,0x9a1c,0x0000,0x3a34,0x010d,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x41,0x9a1d,0x0000,0x3a34,0x010e,0x08,0x00,0x00,0x00,0x04,0x00},	/* ModeIdIndex = 0x10 */
+ {0x43,0x0a1c,0x0306,0x3a57,0x0110,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x44,0x0a1d,0x0306,0x3a57,0x0111,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x46,0x2a1c,0x0407,0x3a81,0x0113,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x47,0x2a1d,0x0407,0x3a81,0x0114,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x49,0x0a3c,0x0508,0x3aab,0x0116,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4a,0x0a3d,0x0508,0x3aab,0x0117,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x4c,0x0e7c,0x0609,0x3adc,0x0119,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x4d,0x0e7d,0x0609,0x3adc,0x011a,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x50,0x9a1b,0x0001,0x3a3b,0x0132,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x51,0xba1b,0x0103,0x3a42,0x0133,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x52,0x9a1b,0x0204,0x3a49,0x0134,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x56,0x9a1d,0x0001,0x3a3b,0x0135,0x08,0x01,0x00,0x00,0x04,0x02},
+ {0x57,0xba1d,0x0103,0x3a42,0x0136,0x08,0x03,0x00,0x00,0x07,0x03},
+ {0x58,0x9a1d,0x0204,0x3a49,0x0137,0x08,0x04,0x00,0x00,0x00,0x04},
+ {0x59,0x9a1b,0x0000,0x3a34,0x0138,0x08,0x00,0x00,0x00,0x04,0x00},
+ {0x5A,0x021b,0x0014,0x3b83,0x0138,0x08,0x01,0x00,0x00,0x04,0x3f},	/* ModeIdIndex = 0x20 */
+ {0x5B,0x0a1d,0x0014,0x3b83,0x0135,0x08,0x01,0x00,0x00,0x04,0x3f},
+ {0x5d,0x0a1d,0x0305,0x3a50,0x0139,0x08,0x05,0x00,0x00,0x07,0x05},
+ {0x62,0x0a3f,0x0306,0x3a57,0x013a,0x08,0x06,0x00,0x00,0x05,0x06},
+ {0x63,0x2a3f,0x0407,0x3a81,0x013b,0x08,0x07,0x00,0x00,0x07,0x0e},
+ {0x64,0x0a7f,0x0508,0x3aab,0x013c,0x08,0x08,0x00,0x00,0x00,0x16},
+ {0x65,0x0eff,0x0609,0x3adc,0x013d,0x08,0x09,0x00,0x00,0x00,0x1e},
+ {0x66,0x0eff,0x070a,0x3af2,0x013e,0x08,0x0a,0x00,0x00,0x00,0x22},	/* mode 1600x1200 add CRT2MODE */
+ {0x68,0x067b,0x080b,0x3b17,0x013f,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x69,0x06fd,0x080b,0x3b17,0x0140,0x08,0x0b,0x00,0x00,0x00,0x29},
+ {0x6b,0x07ff,0x080b,0x3b17,0x0141,0x10,0x0b,0x00,0x00,0x00,0x29},
+ {0x6c,0x067b,0x090c,0x3b37,0x0000,0x08,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6d,0x06fd,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x6e,0x07ff,0x090c,0x3b37,0x0000,0x10,0x0c,0x00,0x00,0x00,0x2f},
+ {0x70,0x2a1b,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x71,0x0a1b,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x74,0x0a1d,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},	/* ModeIdIndex = 0x30 */
+ {0x75,0x0a3d,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x76,0x2a1f,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x77,0x0a1f,0x0511,0x3b63,0x0000,0x08,0x11,0x00,0x00,0x00,0x37},
+ {0x78,0x0a3f,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x79,0x0a3b,0x0612,0x3b74,0x0000,0x08,0x12,0x00,0x00,0x00,0x3a},
+ {0x7a,0x2a1d,0x0410,0x3b52,0x0000,0x08,0x10,0x00,0x00,0x07,0x34},
+ {0x7b,0x0e3b,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7c,0x0e7d,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x7d,0x0eff,0x060f,0x3ad0,0x0000,0x08,0x0f,0x00,0x00,0x00,0x1d},
+ {0x20,0x0e3b,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x21,0x0e7d,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x22,0x0eff,0x0D16,0x49e0,0x0000,0x08,0x16,0x00,0x00,0x00,0x43},
+ {0x23,0x0e3b,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x24,0x0e7d,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x25,0x0eff,0x0614,0x49d5,0x0000,0x08,0x14,0x00,0x00,0x00,0x41},
+ {0x26,0x063b,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},	/* ModeIdIndex = 0x40 */
+ {0x27,0x067d,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0x28,0x06ff,0x0c15,0x49dc,0x0000,0x08,0x15,0x00,0x00,0x00,0x42},
+ {0xff,0x0000,0x0000,0x0000,0x0000,0x00,0x00,0x00,0x00,0x00,0x00}
+};
+
+XGI_StandTableStruct XGI330_StandTable[]=
+{
+/* MD_0_200 */
+ {
+  0x28,0x18,0x08,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_1_200 */
+ {
+  0x28,0x18,0x08,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_200 */
+ {
+  0x50,0x18,0x08,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_3_200 */
+ {
+  0x50,0x18,0x08,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc7,0x06,0x07,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_4 */
+ {
+  0x28,0x18,0x08,0x4000,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+   0xff},
+  {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x03,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+   0xff}
+ },
+/* MD_5 */
+ {
+  0x28,0x18,0x08,0x4000,
+  {0x09,0x03,0x00,0x02},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xa2,
+   0xff},
+  {0x00,0x13,0x15,0x17,0x02,0x04,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x03,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x30,0x0f,0x00,
+   0xff}
+ },
+/* MD_6 */
+ {
+  0x50,0x18,0x08,0x4000,
+  {0x01,0x01,0x00,0x06},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xc2,
+   0xff},
+  {0x00,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+   0x17,0x17,0x17,0x17,0x17,0x17,0x17,0x17,
+   0x01,0x00,0x01,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x0d,0x00,
+   0xff}
+ },
+/* MD_7 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x00,0x03,0x00,0x03},
+  0xa6,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x0d,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+   0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+   0x0e,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+   0xff}
+ },
+/* MDA_DAC */
+ {
+  0x00,0x00,0x00,0x0000,
+  {0x00,0x00,0x00,0x15},
+  0x15,
+  {0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15,0x15,0x15,0x3f,0x3f,
+   0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x00,0x00,
+   0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
+   0x15,0x15,0x15,0x15},
+  {0x15,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x3f}
+ },
+/* CGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x09,0x15,0x00},
+  0x10,
+  {0x04,0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,
+   0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x2a,0x3a,
+   0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x10,
+   0x04},
+  {0x14,0x01,0x11,0x09,0x15,0x00,0x10,0x04,
+   0x14,0x01,0x11,0x09,0x15,0x2a,0x3a,0x2e,
+   0x3e,0x2b,0x3b,0x2f},
+  {0x3f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+   0x3f}
+ },
+/* EGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x05,0x15,0x20},
+  0x30,
+  {0x24,0x34,0x21,0x31,0x25,0x35,0x08,0x18,
+   0x0c,0x1c,0x09,0x19,0x0d,0x1d,0x28,0x38,
+   0x2c,0x3c,0x29,0x39,0x2d,0x3d,0x02,0x12,
+   0x06},
+  {0x16,0x03,0x13,0x07,0x17,0x22,0x32,0x26,
+   0x36,0x23,0x33,0x27,0x37,0x0a,0x1a,0x0e,
+   0x1e,0x0b,0x1b,0x0f},
+  {0x1f,0x2a,0x3a,0x2e,0x3e,0x2b,0x3b,0x2f,
+   0x3f}
+ },
+/* VGA_DAC */
+ {
+  0x00,0x10,0x04,0x0114,
+  {0x11,0x09,0x15,0x2a},
+  0x3a,
+  {0x2e,0x3e,0x2b,0x3b,0x2f,0x3f,0x00,0x05,
+   0x08,0x0b,0x0e,0x11,0x14,0x18,0x1c,0x20,
+   0x24,0x28,0x2d,0x32,0x38,0x3f,0x00,0x10,
+   0x1f},
+  {0x2f,0x3f,0x1f,0x27,0x2f,0x37,0x3f,0x2d,
+   0x31,0x36,0x3a,0x3f,0x00,0x07,0x0e,0x15,
+   0x1c,0x0e,0x11,0x15},
+  {0x18,0x1c,0x14,0x16,0x18,0x1a,0x1c,0x00,
+   0x04}
+ },
+ {
+  0x08,0x0c,0x10,0x0a08,
+  {0x0c,0x0e,0x10,0x0b},
+  0x0c,
+  {0x0d,0x0f,0x10,0x10,0x01,0x08,0x00,0x00,
+   0x00,0x00,0x01,0x00,0x02,0x02,0x01,0x00,
+   0x04,0x04,0x01,0x00,0x05,0x02,0x05,0x00,
+   0x06},
+  {0x01,0x06,0x05,0x06,0x00,0x08,0x01,0x08,
+   0x00,0x07,0x02,0x07,0x06,0x07,0x00,0x00,
+   0x00,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00}
+ },
+/* MD_D */
+ {
+  0x28,0x18,0x08,0x2000,
+  {0x09,0x0f,0x00,0x06},
+  0x63,
+  {0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x00,0x96,0xb9,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_E */
+ {
+  0x50,0x18,0x08,0x4000,
+  {0x01,0x0f,0x00,0x06},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x00,0x96,0xb9,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* ExtVGATable */
+ {
+  0x00,0x00,0x00,0x0000,
+  {0x01,0x0f,0x00,0x0e},
+  0x23,
+  {0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+   0x01,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+   0xff}
+ },
+/* ROM_SAVEPTR */
+ {
+  0x9f,0x3b,0x00,0x00c0,
+  {0x00,0x00,0x00,0x00},
+  0x00,
+  {0x00,0x00,0x00,0x00,0x00,0x00,0xbb,0x3f,
+   0x00,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x1a,0x00,0xac,0x3e,0x00,0xc0,
+   0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00,0x00,0x00,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x00}
+ },
+/* MD_F */
+ {
+  0x50,0x18,0x0e,0x8000,
+  {0x01,0x0f,0x00,0x06},
+  0xa2,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+   0xff},
+  {0x00,0x08,0x00,0x00,0x18,0x18,0x00,0x00,
+   0x00,0x08,0x00,0x00,0x00,0x18,0x00,0x00,
+   0x0b,0x00,0x05,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x05,
+   0xff}
+ },
+/* MD_10 */
+ {
+  0x50,0x18,0x0e,0x8000,
+  {0x01,0x0f,0x00,0x06},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x82,0x84,0x5d,0x28,0x0f,0x63,0xba,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_0_350 */
+ {
+  0x28,0x18,0x0e,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0xa3,
+  {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_1_350 */
+ {
+  0x28,0x18,0x0e,0x0800,
+  {0x09,0x03,0x00,0x02},
+  0xa3,
+  {0x2d,0x27,0x28,0x90,0x2b,0xa0,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x14,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_350 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_3_350 */
+ {
+  0x50,0x18,0x0e,0x1000,
+  {0x01,0x03,0x00,0x02},
+  0xa3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4d,0x0b,0x0c,0x00,0x00,0x00,0x00,
+   0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x08,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_0_1_400 */
+ {
+  0x28,0x18,0x10,0x0800,
+  {0x08,0x03,0x00,0x02},
+  0x67,
+  {0x2d,0x27,0x28,0x90,0x2b,0xb1,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x14,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x0c,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_2_3_400 */
+ {
+  0x50,0x18,0x10,0x1000,
+  {0x00,0x03,0x00,0x02},
+  0x67,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x0c,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00,
+   0xff}
+ },
+/* MD_7_400 */
+ {
+  0x50,0x18,0x10,0x1000,
+  {0x00,0x03,0x00,0x02},
+  0x66,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x0f,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,
+   0x10,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
+   0x0e,0x00,0x0f,0x08},
+  {0x00,0x00,0x00,0x00,0x00,0x10,0x0a,0x00,
+   0xff}
+ },
+/* MD_11 */
+ {
+  0x50,0x1d,0x10,0xa000,
+  {0x01,0x0f,0x00,0x06},
+  0xe3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xc3,
+   0xff},
+  {0x00,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x01,
+   0xff}
+ },
+/* ExtEGATable */
+ {
+  0x50,0x1d,0x10,0xa000,
+  {0x01,0x0f,0x00,0x06},
+  0xe3,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0x0b,0x3e,
+   0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+   0xe9,0x8b,0xdf,0x28,0x00,0xe7,0x04,0xe3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07,
+   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
+   0x01,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0f,
+   0xff}
+ },
+/* MD_13 */
+ {
+  0x28,0x18,0x08,0x2000,
+  {0x01,0x0f,0x00,0x0e},
+  0x63,
+  {0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,
+   0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,
+   0x9c,0x8e,0x8f,0x28,0x40,0x96,0xb9,0xa3,
+   0xff},
+  {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
+   0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
+   0x41,0x00,0x0f,0x00},
+  {0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,
+   0xff}
+ }
+};
+
+XGI_TimingHStruct XGI_TimingH[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_TimingVStruct XGI_TimingV[]=
+{{{0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
+
+XGI_XG21CRT1Struct XGI_UpdateCRT1Table[]=
+{
+ {0x01,0x27,0x91,0x8f,0xc0},	/* 00 */
+ {0x03,0x4f,0x83,0x8f,0xc0},	/* 01 */
+ {0x05,0x27,0x91,0x8f,0xc0},	/* 02 */
+ {0x06,0x4f,0x83,0x8f,0xc0},	/* 03 */
+ {0x07,0x4f,0x83,0x8f,0xc0},	/* 04 */
+ {0x0d,0x27,0x91,0x8f,0xc0},	/* 05 */
+ {0x0e,0x4f,0x83,0x8f,0xc0},	/* 06 */
+ {0x0f,0x4f,0x83,0x5d,0xc0},	/* 07 */
+ {0x10,0x4f,0x83,0x5d,0xc0},	/* 08 */
+ {0x11,0x4f,0x83,0xdf,0x0c},	/* 09 */
+ {0x12,0x4f,0x83,0xdf,0x0c},	/* 10 */
+ {0x13,0x4f,0x83,0x8f,0xc0},	/* 11 */
+ {0x2e,0x4f,0x83,0xdf,0x0c},	/* 12 */
+ {0x2e,0x4f,0x87,0xdf,0xc0},	/* 13 */
+ {0x2f,0x4f,0x83,0x8f,0xc0},	/* 14 */
+ {0x50,0x27,0x91,0xdf,0x0c},	/* 15 */
+ {0x59,0x27,0x91,0x8f,0xc0}	/* 16 */
+};
+
+XGI_CRT1TableStruct XGI_CRT1Table[]=
+{
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+    0xbf,0x1f,0x9c,0x8e,0x96,0xb9,0x30}}, /* 0x0 */
+ {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
+    0x0b,0x3e,0xe9,0x8b,0xe7,0x04,0x00}}, /* 0x1 */
+ {{0x3D,0x31,0x81,0x37,0x1F,0x00,0x05,0x00,
+    0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}}, /* 0x2 */
+ {{0x4F,0x3F,0x93,0x45,0x0D,0x00,0x01,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x3 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+    0xBF,0x1F,0x9C,0x8E,0x96,0xB9,0x30}}, /* 0x4 */
+ {{0x5F,0x50,0x82,0x55,0x81,0x00,0x05,0x00,
+    0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x5 */
+ {{0x63,0x50,0x86,0x56,0x9B,0x00,0x01,0x00,
+    0x06,0x3E,0xE8,0x8B,0xE7,0xFF,0x10}}, /* 0x6 */
+ {{0x64,0x4F,0x88,0x55,0x9D,0x00,0x01,0x00,
+    0xF2,0x1F,0xE0,0x83,0xDF,0xF3,0x10}}, /* 0x7 */
+ {{0x63,0x4F,0x87,0x5A,0x81,0x00,0x05,0x00,
+    0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x10}}, /* 0x8 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+    0xFB,0x1F,0xE0,0x83,0xDF,0xFC,0x80}}, /* 0x9 */
+ {{0x65,0x4F,0x89,0x58,0x80,0x00,0x05,0x60,
+    0x01,0x3E,0xE0,0x83,0xDF,0x02,0x80}}, /* 0xa */
+ {{0x67,0x4F,0x8B,0x58,0x81,0x00,0x05,0x60,
+    0x0D,0x3E,0xE0,0x83,0xDF,0x0E,0x90}}, /* 0xb */
+ {{0x65,0x4F,0x89,0x57,0x9F,0x00,0x01,0x00,
+   0xFB,0x1F,0xE6,0x8A,0xDF,0xFC,0x10}}, /* 0xc */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00,    /* ; 0D (800x600,56Hz) */
+    0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}},         /* ; (VCLK 36.0MHz) */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00,    /* ; 0E (800x600,60Hz) */
+    0x72,0xF0,0x58,0x8C,0x57,0x73,0xA0}},         /* ; (VCLK 40.0MHz) */
+ {{0x7D,0x63,0x81,0x6E,0x1D,0x00,0x06,0x00,    /* ; 0F (800x600,72Hz) */
+    0x98,0xF0,0x7C,0x82,0x57,0x99,0x80}},         /* ; (VCLK 50.0MHz) */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00,    /* ; 10 (800x600,75Hz) */
+    0x6F,0xF0,0x58,0x8B,0x57,0x70,0xA0}},         /* ; (VCLK 49.5MHz) */
+ {{0x7E,0x63,0x82,0x6B,0x13,0x00,0x06,0x00,    /* ; 11 (800x600,85Hz) */
+    0x75,0xF0,0x58,0x8B,0x57,0x76,0xA0}},         /* ; (VCLK 56.25MHz) */
+ {{0x81,0x63,0x85,0x6D,0x18,0x00,0x06,0x60,    /* ; 12 (800x600,100Hz) */
+    0x7A,0xF0,0x58,0x8B,0x57,0x7B,0xA0}},         /* ; (VCLK 75.8MHz) */
+ {{0x83,0x63,0x87,0x6E,0x19,0x00,0x06,0x60,    /* ; 13 (800x600,120Hz) */
+    0x81,0xF0,0x58,0x8B,0x57,0x82,0xA0}},         /* ; (VCLK 79.411MHz) */
+ {{0x85,0x63,0x89,0x6F,0x1A,0x00,0x06,0x60,    /* ; 14 (800x600,160Hz) */
+   0x91,0xF0,0x58,0x8B,0x57,0x92,0xA0}},         /* ; (VCLK 105.822MHz) */
+ {{0x99,0x7F,0x9D,0x84,0x1A,0x00,0x02,0x00,
+    0x96,0x1F,0x7F,0x83,0x7F,0x97,0x10}}, /* 0x15 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x16 */
+ {{0xA1,0x7F,0x85,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF5,0x02,0x88,0xFF,0x25,0x90}}, /* 0x17 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+    0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90}}, /* 0x18 */
+ {{0xA7,0x7F,0x8B,0x89,0x95,0x00,0x02,0x00,
+    0x26,0xF5,0x00,0x83,0xFF,0x27,0x90}}, /* 0x19 */
+ {{0xA9,0x7F,0x8D,0x8C,0x9A,0x00,0x02,0x62,
+    0x2C,0xF5,0x00,0x83,0xFF,0x2D,0x14}}, /* 0x1a */
+ {{0xAB,0x7F,0x8F,0x8D,0x9B,0x00,0x02,0x62,
+    0x35,0xF5,0x00,0x83,0xFF,0x36,0x14}}, /* 0x1b */
+ {{0xCF,0x9F,0x93,0xB2,0x01,0x00,0x03,0x00,
+    0x14,0xBA,0x00,0x83,0xFF,0x15,0x00}}, /* 0x1c */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1d */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+    0x28,0x5A,0x00,0x83,0xFF,0x29,0x89}}, /* 0x1e */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+    0x2E,0x5A,0x00,0x83,0xFF,0x2F,0x89}}, /* 0x1f */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x20 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x21 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x22 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x23 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x24 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x25 */
+ {{0x09,0xC7,0x8D,0xD3,0x0B,0x01,0x04,0x00,
+    0xE0,0x10,0xB0,0x83,0xAF,0xE1,0x2F}}, /* 0x26 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x27 */
+ {{0x43,0xEF,0x87,0x06,0x00,0x41,0x05,0x62,
+    0xD4,0x1F,0xA0,0x83,0x9F,0xD5,0x9F}}, /* 0x28 */
+ {{0x45,0xEF,0x89,0x07,0x01,0x41,0x05,0x62,
+    0xD9,0x1F,0xA0,0x83,0x9F,0xDA,0x9F}}, /* 0x29 */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2a */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2b */
+ {{0x40,0xEF,0x84,0x03,0x1D,0x41,0x01,0x00,
+    0xDA,0x1F,0xA0,0x83,0x9F,0xDB,0x1F}}, /* 0x2c */
+ {{0x59,0xFF,0x9D,0x17,0x13,0x41,0x05,0x44,
+    0x33,0xBA,0x00,0x83,0xFF,0x34,0x0F}}, /* 0x2d */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+    0x38,0xBA,0x00,0x83,0xFF,0x39,0x0F}}, /* 0x2e */
+ {{0x5B,0xFF,0x9F,0x18,0x14,0x41,0x05,0x44,
+    0x3D,0xBA,0x00,0x83,0xFF,0x3E,0x0F}}, /* 0x2f */
+ {{0x5D,0xFF,0x81,0x19,0x95,0x41,0x05,0x44,
+    0x41,0xBA,0x00,0x84,0xFF,0x42,0x0F}}, /* 0x30 */
+ {{0x55,0xFF,0x99,0x0D,0x0C,0x41,0x05,0x00,
+    0x3E,0xBA,0x00,0x84,0xFF,0x3F,0x0F}}, /* 0x31 */
+ {{0x7F,0x63,0x83,0x6C,0x1C,0x00,0x06,0x00,
+    0x72,0xBA,0x27,0x8B,0xDF,0x73,0x80}}, /* 0x32 */
+ {{0x7F,0x63,0x83,0x69,0x13,0x00,0x06,0x00,
+    0x6F,0xBA,0x26,0x89,0xDF,0x6F,0x80}}, /* 0x33 */
+ {{0x7F,0x63,0x82,0x6B,0x13,0x00,0x06,0x00,
+    0x75,0xBA,0x29,0x8C,0xDF,0x75,0x80}}, /* 0x34 */
+ {{0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00,
+    0x24,0xF1,0xAF,0x85,0x3F,0x25,0xB0}}, /* 0x35 */
+ {{0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00,
+    0x1E,0xF1,0xAD,0x81,0x3F,0x1F,0xB0}}, /* 0x36 */
+ {{0xA7,0x7F,0x88,0x89,0x15,0x00,0x02,0x00,
+    0x26,0xF1,0xB1,0x85,0x3F,0x27,0xB0}}, /* 0x37 */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x28,0xC4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x38 */
+ {{0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00,
+    0x28,0xD4,0x7A,0x8E,0xCF,0x29,0xA1}}, /* 0x39 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x00,
+    0x2E,0xD4,0x7D,0x81,0xCF,0x2F,0xA1}}, /* 0x3a */
+ {{0xDC,0x9F,0x00,0xAB,0x19,0x00,0x07,0x00,
+    0xE6,0xEF,0xC0,0xC3,0xBF,0xE7,0x90}}, /* 0x3b */
+ {{0x6B,0x59,0x8F,0x5E,0x8C,0x00,0x05,0x00,
+    0x0B,0x3E,0xE9,0x8B,0xE7,0x04,0x00}}, /* 0x3c */
+ {{0x7B,0x63,0x9F,0x6A,0x93,0x00,0x05,0x00,
+    0x6F,0xF0,0x58,0x8A,0x57,0x70,0xA0}}, /* 0x3d */
+ {{0x86,0x6A,0x8a,0x74,0x06,0x00,0x02,0x00,
+    0x8c,0x15,0x4f,0x83,0xef,0x8d,0x30}}, /* 0x3e */
+ {{0x81,0x6A,0x85,0x70,0x00,0x00,0x02,0x00,
+    0x0f,0x3e,0xeb,0x8e,0xdf,0x10,0x00}}, /* 0x3f */
+ {{0xCE,0x9F,0x92,0xA9,0x17,0x00,0x07,0x00,
+    0x20,0xF5,0x03,0x88,0xFF,0x21,0x90}}, /* 0x40 */
+ {{0xE6,0xAE,0x8A,0xBD,0x90,0x00,0x03,0x00,
+    0x3D,0x10,0x1A,0x8D,0x19,0x3E,0x2F}}, /* 0x41 */
+ {{0xB9,0x8F,0x9D,0x9B,0x8A,0x00,0x06,0x00,
+    0x7D,0xFF,0x60,0x83,0x5F,0x7E,0x90}}, /* 0x42 */
+ {{0xC3,0x8F,0x87,0x9B,0x0B,0x00,0x07,0x00,
+    0x82,0xFF,0x60,0x83,0x5F,0x83,0x90}},  /* 0x43 */
+ {{0xAD,0x7F,0x91,0x8E,0x9C,0x00,0x02,0x82,
+    0x49,0xF5,0x00,0x83,0xFF,0x4A,0x90}},  /* 0x44 */
+ {{0xCD,0x9F,0x91,0xA7,0x19,0x00,0x07,0x60,
+    0xE6,0xFF,0xC0,0x83,0xBF,0xE7,0x90}},  /* 0x45 */
+ {{0xD3,0x9F,0x97,0xAB,0x1F,0x00,0x07,0x60,
+    0xF1,0xFF,0xC0,0x83,0xBF,0xF2,0x90}},  /* 0x46 */
+ {{0xD7,0x9F,0x9B,0xAC,0x1E,0x00,0x07,0x00,
+    0x03,0xDE,0xC0,0x84,0xBF,0x04,0x90}}  /* 0x47 */
+};
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 02 (720x400) */
+                {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 03 (720x350) */
+                {{      0x6A,0x77,0xBB,0x6E,0x84,0x2E,0x02,0x5A,0x04,0x00,0x80,0x20,0x7E,0x80,0x97,0x00  }},/* 04 (640x480) ;;5/6/02 */
+                {{      0xCF,0x77,0xB7,0xC8,0x84,0x3B,0x02,0x5A,0x04,0x00,0x80,0x19,0x88,0xAE,0xA3,0x00  }},/* 05 (800x600) ;;1/12/02 */
+                {{      0xEE,0x77,0xBB,0x66,0x87,0x32,0x01,0x5A,0x04,0x00,0x80,0x1B,0xD4,0x2F,0x6F,0x00  }}/* 06 (1024x768) ;;5/6/02 */
+          };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[]= {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 02 (720x400) */
+                {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 03 (720x350) */
+                {{      0x69,0x77,0xBB,0x6E,0x84,0x1E,0x00,0x5A,0x04,0x00,0x80,0x25,0x1A,0x80,0x26,0x00  }},/* 04 (640x480) ;;5/6/02 */
+                {{      0xCE,0x77,0xB7,0xB6,0x83,0x2C,0x02,0x5A,0x04,0x00,0x80,0x1C,0x00,0x82,0x97,0x00  }},/* 05 (800x600) ;;5/6/02 */
+                {{      0xED,0x77,0xBB,0x66,0x8C,0x21,0x02,0x5A,0x04,0x00,0x80,0x1F,0xA0,0x7E,0x73,0x00  }}/* 06 (1024x768) ;;5/6/02 */
+          };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[]=  {
+                /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
+                {{      0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 00 (640x200,640x400) */
+                {{      0x41,0x7F,0xB7,0x80,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 01 (640x350) */
+                {{      0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 02 (720x400) */
+                {{      0x41,0x7F,0xB7,0x12,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 03 (720x350) */
+                {{      0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00  }},/* ; 04 (640x480) */
+                {{      0xC3,0x7F,0xB7,0x7A,0x84,0x40,0x02,0x5A,0x05,0x00,0x80,0x1F,0x84,0x3D,0x28,0x00  }},/* ; 05 (800x600) ;;1/12/02 */
+                {{      0xE5,0x7F,0xB7,0x1D,0xA7,0x3E,0x04,0x5A,0x05,0x00,0x80,0x20,0x3E,0xE4,0x22,0x00  }}/* ; 06 (1024x768) ;;1/12/02 */
+	  };
+
+XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[]={
+                /* Index:000,0x01,0x02,0x04,0x03,0x05,0x06,0x07,0x08,0x15,0x1F,0x0C,0x0D,0x0E,0x0F,0x10h */
+                {{      0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
+                {{      0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
+                {{      0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 02 (720x400) */
+                {{      0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 03 (720x350) */
+                {{      0x61,0x7F,0xB7,0x99,0x84,0x35,0x04,0x5A,0x05,0x00,0x80,0x26,0x2A,0x55,0x5D,0x00 }},/* 04 (640x480) */
+                {{      0xC1,0x7F,0xB7,0x4D,0x8C,0x1E,0x31,0x5A,0x05,0x00,0x80,0x26,0x78,0x19,0x34,0x00 }},/* 05 (800x600) ;;1/12/02 */
+                {{      0xE4,0x7F,0xB7,0x1E,0xAF,0x29,0x37,0x5A,0x05,0x00,0x80,0x25,0x8C,0xB2,0x2A,0x00 }}/* 06 (1024x768) ;;1/12/02 */
+	     };
+
+UCHAR XGI_CH7017LV1024x768[]={0x60,0x02,0x00,0x07,0x40,0xED,0xA3,
+                   			0xC8,0xC7,0xAC,0xE0,0x02};
+UCHAR XGI_CH7017LV1400x1050[]={0x60,0x03,0x11,0x00,0x40,0xE3,0xAD,
+                   			0xDB,0xF6,0xAC,0xE0,0x02};
+
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataStruct  XGI_StLCD1024x768Data[]=
+{
+ {   62,  25, 800, 546,1344, 806},
+ {   32,  15, 930, 546,1344, 806},
+ {   62,  25, 800, 546,1344, 806}, /* chiawen for dot9 -> dot8 */
+ {  104,  45, 945, 496,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {   31,  18,1008, 624,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[]=
+{
+ {   42,  25,1536, 419,1344, 806}, /* { 12, 5, 896, 512,1344, 806}, // alan 09/12/2003 */
+ {   48,  25,1536, 369,1344, 806}, /* { 12, 5, 896, 510,1344, 806}, // alan 09/12/2003 */
+ {   42,  25,1536, 419,1344, 806}, /* { 32, 15,1008, 505,1344, 806}, // alan 09/12/2003 */
+ {   48,  25,1536, 369,1344, 806}, /* { 32, 15,1008, 514,1344, 806}, // alan 09/12/2003 */
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806},
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806},
+ {   12,   5, 896, 500,1344, 806},
+ {   42,  25,1024, 625,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};
+
+/*XGI330_LCDDataStruct  XGI_St2LCD1024x768Data[]=
+{
+ {   62,  25, 800, 546,1344, 806},
+ {   32,  15, 930, 546,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {  104,  45, 945, 496,1344, 806},
+ {   62,  25, 800, 546,1344, 806},
+ {   31,  18,1008, 624,1344, 806},
+ {    1,   1,1344, 806,1344, 806}
+};*/
+
+XGI330_LCDDataStruct  XGI_CetLCD1024x768Data[]=
+{
+	{         1,1,1344,806,1344,806           }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1344,806,1344,806           }, /* 01 (320x350,640x350) */
+        {         1,1,1344,806,1344,806           }, /* 02 (360x400,720x400) */
+        {         1,1,1344,806,1344,806           }, /* 03 (720x350) */
+        {         1,1,1344,806,1344,806           }, /* 04 (640x480x60Hz) */
+        {         1,1,1344,806,1344,806           }, /* 05 (800x600x60Hz) */
+        {         1,1,1344,806,1344,806           }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1280x1024Data[]=
+{
+ {   22,   5, 800, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {   13,   5,1024, 675,1560,1152},
+ {   16,   9,1266, 804,1688,1072},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1280x1024Data[]=
+{
+ {  211,  60,1024, 501,1688,1066},
+ {  211,  60,1024, 508,1688,1066},
+ {  211,  60,1024, 501,1688,1066},
+ {  211,  60,1024, 508,1688,1066},
+ {  211,  60,1024, 500,1688,1066},
+ {  211,  75,1024, 625,1688,1066},
+ {  211, 120,1280, 798,1688,1066},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_St2LCD1280x1024Data[]=
+{
+ {   22,   5, 800, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {  176,  45, 900, 510,1650,1088},
+ {   22,   5, 800, 510,1650,1088},
+ {   13,   5,1024, 675,1560,1152},
+ {   16,   9,1266, 804,1688,1072},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1280x1024Data[]=
+{
+	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 02 (360x400,720x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 03 (720x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 04 (640x480x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 05 (800x600x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {         1,1,1688,1066,1688,1066         } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1400x1050Data[]=
+{
+	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
+        {         211,100,2100,408,1688,1066      }, /* 02 (360x400,720x400) */
+        {         211,64,1536,358,1688,1066       }, /* 03 (720x350) */
+        {         211,48,840,488,1688,1066        }, /* 04 (640x480x60Hz) */
+        {         211,72,1008,609,1688,1066       }, /* 05 (800x600x60Hz) */
+        {         211,128,1400,776,1688,1066      }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz w/o Scaling) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1400x1050Data[]=
+{
+	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
+        {         211,100,2100,408,1688,1066      }, /* 02 (360x400,720x400) */
+        {         211,64,1536,358,1688,1066       }, /* 03 (720x350) */
+        {         211,48,840,488,1688,1066        }, /* 04 (640x480x60Hz) */
+        {         211,72,1008,609,1688,1066       }, /* 05 (800x600x60Hz) */
+        {         211,128,1400,776,1688,1066      }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz w/o Scaling) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1600x1200Data[]=
+{
+        {         4,1,1620,420,2160,1250          }, /* { 3,1,2160,425,2160,1250 }, // 00 (320x200,320x400,640x200,640x400) // alan 10/14/2003 */
+        {         27,7,1920,375,2160,1250         }, /* 01 (320x350,640x350) */
+        {         4,1,1620,420,2160,1250          }, /* { 3,1,2160,425,2160,1250 }, // 02 (360x400,720x400) // alan 10/14/2003 */
+        {         27,7,1920,375,2160,1250         }, /* 03 (720x350) */
+        {         27,4,800,500,2160,1250          }, /* 04 (640x480x60Hz) */
+        {         4,1,1080,625,2160,1250          }, /* 05 (800x600x60Hz) */
+        {         5,2,1350,800,2160,1250          }, /* 06 (1024x768x60Hz) */
+        {         27,16,1500,1064,2160,1250       }, /* 07 (1280x1024x60Hz) */
+        {         9,7,1920,1106,2160,1250         }, /* 08 (1400x1050x60Hz) */
+        {         1,1,2160,1250,2160,1250         }  /* 09 (1600x1200x60Hz) ;302lv */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1600x1200Data[]=
+{
+        {         27,4,800,500,2160,1250          },/* 00 (320x200,320x400,640x200,640x400) */
+        {         27,4,800,500,2160,1250          },/* 01 (320x350,640x350) */
+        {         27,4,800,500,2160,1250          },/* 02 (360x400,720x400) */
+        {         27,4,800,500,2160,1250          },/* 03 (720x350) */
+        {         27,4,800,500,2160,1250          },/* 04 (320x240,640x480) */
+        {         4,1,1080,625,2160,1250          },/* 05 (400x300,800x600) */
+        {         5,2,1350,800,2160,1250          },/* 06 (512x384,1024x768) */
+        {         135,88,1600,1100,2160,1250      },/* 07 (1280x1024) */
+        {         1,1,1800,1500,2160,1250         },/* 08 (1400x1050) */
+        {         1,1,2160,1250,2160,1250         } /* 09 (1600x1200) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1400x1050Data[]=
+{
+	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 02 (360x400,720x400) */
+        {         1,1,1688,1066,1688,1066         }, /* 03 (720x350) */
+        {         1,1,1688,1066,1688,1066         }, /* 04 (640x480x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 05 (800x600x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 06 (1024x768x60Hz) */
+        {         1,1,1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_NoScalingData[]=
+{
+ {    1,   1, 800, 449, 800, 449},
+ {    1,   1, 800, 449, 800, 449},
+ {    1,   1, 900, 449, 900, 449},
+ {    1,   1, 900, 449, 900, 449},
+ {    1,   1, 800, 525, 800, 525},
+ {    1,   1,1056, 628,1056, 628},
+ {    1,   1,1344, 806,1344, 806},
+ {    1,   1,1688,1066,1688,1066}
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1024x768x75Data[]=
+{
+        {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+        {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+        {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+        {8,5,1312,500,1312,800   }, /* ; 04 (640x480x75Hz) */
+        {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1024x768x75Data[]=
+{
+        {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
+        {42,25,1536,419,1344,806 }, /* ; 02 (360x400,720x400) */
+        {48,25,1536,369,1344,806 }, /* ; 03 (720x350) */
+        {8,5,1312,500,1312,800   }, /* ; 04 (640x480x75Hz) */
+        {41,25,1024,625,1312,800 }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1024x768x75Data[]=
+{
+        {1,1,1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+        {1,1,1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+        {1,1,1312,800,1312,800}, /* ; 03 (720x350) */
+        {1,1,1312,800,1312,800}, /* ; 04 (640x480x75Hz) */
+        {1,1,1312,800,1312,800}, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_ExtLCD1280x1024x75Data[]=
+{
+        {211,60,1024,501,1688,1066   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {211,60,1024,508,1688,1066   }, /* ; 01 (320x350,640x350) */
+        {211,60,1024,501,1688,1066   }, /* ; 02 (360x400,720x400) */
+        {211,60,1024,508,1688,1066   }, /* ; 03 (720x350) */
+        {211,45,768,498,1688,1066    }, /* ; 04 (640x480x75Hz) */
+        {211,75,1024,625,1688,1066   }, /* ; 05 (800x600x75Hz) */
+        {211,120,1280,798,1688,1066  }, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066     }  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_StLCD1280x1024x75Data[]=
+{
+        {211,60,1024,501,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {211,60,1024,508,1688,1066 }, /* ; 01 (320x350,640x350) */
+        {211,60,1024,501,1688,1066 }, /* ; 02 (360x400,720x400) */
+        {211,60,1024,508,1688,1066 }, /* ; 03 (720x350) */
+        {211,45,768,498,1688,1066  }, /* ; 04 (640x480x75Hz) */
+        {211,75,1024,625,1688,1066 }, /* ; 05 (800x600x75Hz) */
+        {211,120,1280,798,1688,1066}, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066   }  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_CetLCD1280x1024x75Data[]=
+{
+        {1,1,1688,1066,1688,1066}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,1688,1066,1688,1066}, /* ; 01 (320x350,640x350) */
+        {1,1,1688,1066,1688,1066}, /* ; 02 (360x400,720x400) */
+        {1,1,1688,1066,1688,1066}, /* ; 03 (720x350) */
+        {1,1,1688,1066,1688,1066}, /* ; 04 (640x480x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 05 (800x600x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066}  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataStruct  XGI_NoScalingDatax75[]=
+{
+        {1,1,800,449,800,449    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1,1,800,449,800,449    }, /* ; 01 (320x350,640x350) */
+        {1,1,900,449,900,449    }, /* ; 02 (360x400,720x400) */
+        {1,1,900,449,900,449    }, /* ; 03 (720x350) */
+        {1,1,840,500,840,500    }, /* ; 04 (640x480x75Hz) */
+        {1,1,1056,625,1056,625  }, /* ; 05 (800x600x75Hz) */
+        {1,1,1312,800,1312,800  }, /* ; 06 (1024x768x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 07 (1280x1024x75Hz) */
+        {1,1,1688,1066,1688,1066}, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+        {1,1,2160,1250,2160,1250}, /* ; 09 (1600x1200x75Hz) */
+        {1,1,1688,806,1688,806  }  /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[]=
+{
+   {  9,1057,0, 771  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+   {  9,1057,0, 771  }, /* ; 01 (320x350,640x350) */
+   {  9,1057,0, 771  }, /* ; 02 (360x400,720x400) */
+   {  9,1057,0, 771  }, /* ; 03 (720x350) */
+   {  9,1057,0, 771  }, /* ; 04 (640x480x60Hz) */
+   {  9,1057,0, 771  }, /* ; 05 (800x600x60Hz) */
+   {  9,1057,805, 770  }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[]=
+{
+        { 9,1057,737,703   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        { 9,1057,686,651   }, /* ; 01 (320x350,640x350) */
+        { 9,1057,737,703   }, /* ; 02 (360x400,720x400) */
+        { 9,1057,686,651   }, /* ; 03 (720x350) */
+        { 9,1057,776,741   }, /* ; 04 (640x480x60Hz) */
+        { 9,1057, 0 ,771   }, /* ; 05 (800x600x60Hz) */
+        { 9,1057,805,770   }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[]=
+{
+       	{      1152,856,622,587   }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      1152,856,597,562   }, /* ; 01 (320x350,640x350) */
+        {      1152,856,622,587   }, /* ; 02 (360x400,720x400) */
+        {      1152,856,597,562   }, /* ; 03 (720x350) */
+        {      1152,856,662,627   }, /* ; 04 (640x480x60Hz) */
+        {      1232,936,722,687   }, /* ; 05 (800x600x60Hz) */
+        {      0,1048,805,770   }  /* ; 06 (1024x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[]=
+{
+        {      18,1346,981,940     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1346,926,865     },/* 01 (320x350,640x350) */
+        {      18,1346,981,940     },/* 02 (360x400,720x400) */
+        {      18,1346,926,865     },/* 03 (720x350) */
+        {      18,1346,0,1025     },/* 04 (640x480x60Hz) */
+        {      18,1346,0,1025     },/* 05 (800x600x60Hz) */
+        {      18,1346,1065,1024     },/* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[]=
+{
+        {      18,1346,970,907     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1346,917,854     },/* 01 (320x350,640x350) */
+        {      18,1346,970,907     },/* 02 (360x400,720x400) */
+        {      18,1346,917,854     },/* 03 (720x350) */
+        {      18,1346,0,1025     },/* 04 (640x480x60Hz) */
+        {      18,1346,0,1025     },/* 05 (800x600x60Hz) */
+        {      18,1346,1065,1024     },/* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[]=
+{
+        {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
+        {      1368,1008,752,711    }, /* 02 (360x400,720x400) */
+    	{      1368,1008,729,688    }, /* 03 (720x350) */
+        {      1368,1008,794,753    }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813    }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897    }, /* 06 (1024x768x60Hz) */
+        {      18,1346,1065,1024    }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[]=
+{
+        {      9,1337,981,940    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      9,1337,926,884    }, /* ; 01 (320x350,640x350) alan, 2003/09/30 */
+        {      9,1337,981,940    }, /* ; 02 (360x400,720x400) */
+        {      9,1337,926,884    }, /* ; 03 (720x350) alan, 2003/09/30 */
+        {      9,1337,0,1025    }, /* ; 04 (640x480x60Hz) */
+        {      9,1337,0,1025    }, /* ; 05 (800x600x60Hz) */
+        {      9,1337,1065,1024    }, /* ; 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[]=
+{
+        {      9,1337,970,907    }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {      9,1337,917,854    }, /* ; 01 (320x350,640x350) */
+        {      9,1337,970,907    }, /* ; 02 (360x400,720x400) */
+        {      9,1337,917,854    }, /* ; 03 (720x350) */
+        {      9,1337,0,1025    }, /* ; 04 (640x480x60Hz) */
+        {      9,1337,0,1025    }, /* ; 05 (800x600x60Hz) */
+        {      9,1337,1065,1024    }, /* ; 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[]=
+{
+        {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
+        {      1368,1008,752,711    }, /* 02 (360x400,720x400) */
+    	{      1368,1008,729,688    }, /* 03 (720x350) */
+        {      1368,1008,794,753    }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813    }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897    }, /* 06 (1024x768x60Hz) */
+        {      9,1337,1065,1024    }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1400x1050Data[]=
+{
+        {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
+        {      18,1464,0,1051    }, /* 02 (360x400,720x400) */
+        {      18,1464,0,1051    }, /* 03 (720x350) */
+        {      18,1464,0,1051    }, /* 04 (640x480x60Hz) */
+        {      18,1464,0,1051    }, /* 05 (800x600x60Hz) */
+        {      18,1464,0,1051    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1400x1050Data[]=
+{
+        {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
+        {      18,1464,0,1051    }, /* 02 (360x400,720x400) */
+        {      18,1464,0,1051    }, /* 03 (720x350) */
+        {      18,1464,0,1051    }, /* 04 (640x480x60Hz) */
+        {      18,1464,0,1051    }, /* 05 (800x600x60Hz) */
+        {      18,1464,0,1051    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1400x1050Data[]=
+{
+        {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1455,0,1051     },/* 01 (320x350,640x350) */
+        {      9,1455,0,1051     },/* 02 (360x400,720x400) */
+        {      9,1455,0,1051     },/* 03 (720x350) */
+        {      9,1455,0,1051     },/* 04 (640x480x60Hz) */
+        {      9,1455,0,1051     },/* 05 (800x600x60Hz) */
+        {      9,1455,0,1051     },/* 06 (1024x768x60Hz) */
+        {      1637,1397,1053,1038     },/* 07 (1280x1024x60Hz) */
+        {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1400x1050Data[]=
+{
+        {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1455,0,1051     },/* 01 (320x350,640x350) */
+        {      9,1455,0,1051     },/* 02 (360x400,720x400) */
+        {      9,1455,0,1051     },/* 03 (720x350) */
+        {      9,1455,0,1051     },/* 04 (640x480x60Hz) */
+        {      9,1455,0,1051     },/* 05 (800x600x60Hz) */
+        {      9,1455,0,1051     },/* 06 (1024x768x60Hz) */
+        {      1637,1397,1053,1038     },/* 07 (1280x1024x60Hz) */
+        {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[]=
+{
+        {      1308,1068,781,766    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1308,1068,781,766    }, /* 01 (320x350,640x350) */
+        {      1308,1068,781,766    }, /* 02 (360x400,720x400) */
+        {      1308,1068,781,766    }, /* 03 (720x350) */
+        {      1308,1068,781,766    }, /* 04 (640x480x60Hz) */
+        {      1388,1148,841,826    }, /* 05 (800x600x60Hz) */
+        {      1490,1250,925,910    }, /* 06 (1024x768x60Hz) */
+        {      1646,1406,1053,1038    }, /* 07 (1280x1024x60Hz) */
+        {      18,1464,0,1051    } /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[]=
+{
+        {      0,1448,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1448,0,1051    }, /* 01 (320x350,640x350) */
+        {      0,1448,0,1051    }, /* 02 (360x400,720x400) */
+        {      0,1448,0,1051    }, /* 03 (720x350) */
+        {      0,1448,0,1051    }  /* 04 (640x480x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[]=
+{
+	{      18,1682,0,1201    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1682,0,1201    }, /* 01 (320x350,640x350) */
+        {      18,1682,0,1201    }, /* 02 (360x400,720x400) */
+        {      18,1682,0,1201    }, /* 03 (720x350) */
+        {      18,1682,0,1201    }, /* 04 (640x480x60Hz) */
+        {      18,1682,0,1201    }, /* 05 (800x600x60Hz) */
+        {      18,1682,0,1201    }, /* 06 (1024x768x60Hz) */
+        {      18,1682,0,1201    }, /* 07 (1280x1024x60Hz) */
+        {      18,1682,0,1201    }, /* 08 (1400x1050x60Hz) */
+        {      18,1682,0,1201    }  /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[]=
+{
+        {      18,1682,1150,1101    }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      18,1682,1083,1034    }, /* 01 (320x350,640x350) */
+        {      18,1682,1150,1101    }, /* 02 (360x400,720x400) */
+        {      18,1682,1083,1034    }, /* 03 (720x350) */
+        {      18,1682,0,1201    }, /* 04 (640x480x60Hz) */
+        {      18,1682,0,1201    }, /* 05 (800x600x60Hz) */
+        {      18,1682,0,1201    }, /* 06 (1024x768x60Hz) */
+        {      18,1682,1232,1183    }, /* 07 (1280x1024x60Hz) */
+        {      18,1682,0,1201    }, /* 08 (1400x1050x60Hz) */
+        {      18,1682,0,1201    } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[]=
+{
+        {      9,1673,0,1201     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1673,0,1201     },/* 01 (320x350,640x350) */
+        {      9,1673,0,1201     },/* 02 (360x400,720x400) */
+        {      9,1673,0,1201     },/* 03 (720x350) */
+        {      9,1673,0,1201     },/* 04 (640x480x60Hz) */
+        {      9,1673,0,1201     },/* 05 (800x600x60Hz) */
+        {      9,1673,0,1201     },/* 06 (1024x768x60Hz) */
+        {      9,1673,0,1201     },/* 07 (1280x1024x60Hz) */
+        {      9,1673,0,1201     },/* 08 (1400x1050x60Hz) */
+        {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[]=
+{
+	{      9,1673,1150,1101     },/* 00 (320x200,320x400,640x200,640x400) */
+        {      9,1673,1083,1034     },/* 01 (320x350,640x350) */
+        {      9,1673,1150,1101     },/* 02 (360x400,720x400) */
+        {      9,1673,1083,1034     },/* 03 (720x350) */
+        {      9,1673,0,1201     },/* 04 (640x480x60Hz) */
+        {      9,1673,0,1201     },/* 05 (800x600x60Hz) */
+        {      9,1673,0,1201     },/* 06 (1024x768x60Hz) */
+        {      9,1673,1232,1183     },/* 07 (1280x1024x60Hz) */
+        {      9,1673,0,1201     },/* 08 (1400x1050x60Hz) */
+        {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
+};
+
+XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[]=
+{
+        {     9,657,448,405,96,2  }, /* 00 (320x200,320x400,640x200,640x400) */
+        {     9,657,448,355,96,2  }, /* 01 (320x350,640x350) */
+        {     9,657,448,405,96,2  }, /* 02 (360x400,720x400) */
+        {     9,657,448,355,96,2  }, /* 03 (720x350) */
+        {     9,657,1,483,96,2  }, /* 04 (640x480x60Hz) */
+        {     9,849,627,600,128,4  }, /* 05 (800x600x60Hz) */
+        {     9,1057,805,770,0136,6  }, /* 06 (1024x768x60Hz) */
+        {     9,1337,0,1025,112,3  }, /* 07 (1280x1024x60Hz) */
+        {     9,1457,0,1051,112,3  }, /* 08 (1400x1050x60Hz) }, //;[ycchen] 12/19/02 */
+        {     9,1673,0,1201,192,3  }, /* 09 (1600x1200x60Hz) */
+        {     9,1337,0,771,112,6  }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768x75Data[]=		/* ;;1024x768x75Hz */
+{
+        {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1049,0,769},    /* ; 01 (320x350,640x350) */
+        {9,1049,0,769},    /* ; 02 (360x400,720x400) */
+        {9,1049,0,769},    /* ; 03 (720x350) */
+        {9,1049,0,769},    /* ; 04 (640x480x75Hz) */
+        {9,1049,0,769},    /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768x75Data[]=
+{
+        {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1049,0,769},    /* ; 01 (320x350,640x350) */
+        {9,1049,0,769},    /* ; 02 (360x400,720x400) */
+        {9,1049,0,769},    /* ; 03 (720x350) */
+        {9,1049,0,769},    /* ; 04 (640x480x75Hz) */
+        {9,1049,0,769},    /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[]=	/* ;;1024x768x75Hz */
+{
+        {1152,856,622,587},     /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1152,856,597,562},     /* ; 01 (320x350,640x350) */
+        {1192,896,622,587},     /* ; 02 (360x400,720x400) */
+        {1192,896,597,562},     /* ; 03 (720x350) */
+        {1129,857,656,625},     /* ; 04 (640x480x75Hz) */
+        {1209,937,716,685},     /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769} 	   	/* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+{
+        {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
+        {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
+        {18,1314,0,1025     },/* ; 02 (360x400,720x400) */
+        {18,1314,0,1025     },/* ; 03 (720x350) */
+        {18,1314,0,1025     },/* ; 04 (640x480x60Hz) */
+        {18,1314,0,1025     },/* ; 05 (800x600x60Hz) */
+        {18,1314,0,1025     },/* ; 06 (1024x768x60Hz) */
+        {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDLDes1280x1024x75Data[]=
+{
+        {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
+        {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
+        {18,1314,0,1025     },/* ; 02 (360x400,720x400) */
+        {18,1314,0,1025     },/* ; 03 (720x350) */
+        {18,1314,0,1025     },/* ; 04 (640x480x60Hz) */
+        {18,1314,0,1025     },/* ; 05 (800x600x60Hz) */
+        {18,1314,0,1025     },/* ; 06 (1024x768x60Hz) */
+        {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+{
+        {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
+        {1408,1048,752,711},    /* ; 02 (360x400,720x400) */
+        {1408,1048,729,688},    /* ; 03 (720x350) */
+        {1377,985,794,753},    /* ; 04 (640x480x75Hz) */
+        {1457,1065,854,813},    /* ; 05 (800x600x75Hz) */
+        {1569,1177,938,897},    /* ; 06 (1024x768x75Hz) */
+        {18,1314,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+{
+	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+        {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+        {9,1305,0,1025},/* ; 03 (720x350) */
+        {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+        {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+        {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+        {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024x75Data[]=
+{
+	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,1305,0,1025},/* ; 01 (320x350,640x350) */
+        {9,1305,0,1025},/* ; 02 (360x400,720x400) */
+        {9,1305,0,1025},/* ; 03 (720x350) */
+        {9,1305,0,1025},/* ; 04 (640x480x60Hz) */
+        {9,1305,0,1025},/* ; 05 (800x600x60Hz) */
+        {9,1305,0,1025},/* ; 06 (1024x768x60Hz) */
+        {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
+};
+
+XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+{
+        {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
+        {1408,1048,752,711},    /* ; 02 (360x400,720x400) */
+        {1408,1048,729,688},    /* ; 03 (720x350) */
+        {1377,985,794,753},    /* ; 04 (640x480x75Hz) */
+        {1457,1065,854,813},    /* ; 05 (800x600x75Hz) */
+        {1569,1177,938,897},    /* ; 06 (1024x768x75Hz) */
+        {9,1305,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[]= /* Scaling LCD 75Hz */
+{
+	{9,657,448,405,96,2},   /* ; 00 (320x200,320x400,640x200,640x400) */
+        {9,657,448,355,96,2},   /* ; 01 (320x350,640x350) */
+        {9,738,448,405,108,2},   /* ; 02 (360x400,720x400) */
+        {9,738,448,355,108,2},   /* ; 03 (720x350) */
+        {9,665,0,481,64,3},   /* ; 04 (640x480x75Hz) */
+        {9,825,0,601,80,3},   /* ; 05 (800x600x75Hz) */
+        {9,1049,0,769,96,3},   /* ; 06 (1024x768x75Hz) */
+        {9,1305,0,1025,144,3},   /* ; 07 (1280x1024x75Hz) */
+        {9,1457,0,1051,112,3},   /* ; 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {9,1673,0,1201,192,3},   /* ; 09 (1600x1200x75Hz) */
+        {9,1337,0,771,112,6}    /* ; 0A (1280x768x60Hz) */
+};
+
+XGI330_TVDataStruct  XGI_StPALData[]=
+{
+ {    1,   1, 864, 525,1270, 400, 100,   0, 760},
+ {    1,   1, 864, 525,1270, 350, 100,   0, 760},
+ {    1,   1, 864, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 864, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 864, 525,1270, 480,  50,   0, 760},
+ {    1,   1, 864, 525,1270, 600,  50,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_ExtPALData[]=
+{
+ {    2,   1,1080, 463,1270, 500,  50,   0,  50},
+ {   15,   7,1152, 413,1270, 500,  50,   0,  50},
+ {    2,   1,1080, 463,1270, 500,  50,   0,  50},
+ {   15,   7,1152, 413,1270, 500,  50,   0,  50},
+ {    2,   1, 900, 543,1270, 500,   0,   0,  50},
+ {    4,   3,1080, 663,1270, 500, 438,   0, 438},
+ {    1,   1,1125, 831,1270, 500, 686,   0, 686},     /*301b*/
+ {    3,   2,1080, 619,1270, 540, 438,   0, 438}
+};
+
+XGI330_TVDataStruct  XGI_StNTSCData[]=
+{
+ {    1,   1, 858, 525,1270, 400,  50,   0, 760},
+ {    1,   1, 858, 525,1270, 350,  50,   0, 640},
+ {    1,   1, 858, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 480,   0,   0, 760}
+};
+
+XGI330_TVDataStruct  XGI_ExtNTSCData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1270, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1270, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1270, 420,   0,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_St1HiTVData[]=
+{
+    	{        1,1,892,563,690,800,0,0,0               }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
+        {        1,1,1000,563,785,800,0,0,0              }, /* 02 (360x400,720x400) */
+        {        1,1,1000,563,785,700,0,0,0              }, /* 03 (720x350) */
+        {        1,1,892,563,690,960,0,0,0               }, /* 04 (320x240,640x480) */
+        {        8,5,1050,683,1648,960,0x150,1,0         }  /* 05 (400x300,800x600) */
+};
+
+XGI330_TVDataStruct  XGI_St2HiTVData[]=
+{
+        {        3,1,840,483,1648,960,0x032,0,0          }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
+        {        3,1,840,483,1648,960,0x032,0,0          }, /* 02 (360x400,720x400) */
+        {        1,1,1000,563,785,700,0,0,0              }, /* 03 (720x350) */
+        {        5,2,840,563,1648,960,0x08D,1,0          }, /* 04 (320x240,640x480) */
+        {        8,5,1050,683,1648,960,0x17C,1,0         }  /* 05 (400x300,800x600) */
+
+};
+
+XGI330_TVDataStruct  XGI_ExtHiTVData[]=
+{
+        {        6,1,840,563,1632,960,0,0,0              }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        3,1,960,563,1632,960,0,0,0              }, /* 01 (320x350,640x350) */
+        {        3,1,840,483,1632,960,0,0,0              }, /* 02 (360x400,720x400) */
+        {        3,1,960,563,1632,960,0,0,0              }, /* 03 (720x350) */
+        {        5,1,840,563,1648,960,0x166,1,0          }, /* 04 (320x240,640x480) */
+        {        16,5,1050,683,1648,960,0x143,1,0        }, /* 05 (400x300,800x600) */
+        {        25,12,1260,851,1648,960,0x032,0,0       }, /* 06 (512x384,1024x768) */
+        {        5,4,1575,1124,1648,960,0x128,0,0        }, /* 07 (1280x1024) */
+        {        4,1,1050,563,1548,960,0x143,1,0         }, /* 08 (800x480) */
+        {        5,2,1400,659,1648,960,0x032,0,0         }, /* 09 (1024x576) */
+        {        8,5,1750,803,1648,960,0x128,0,0         }  /* 0A (1280x720) */
+
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr525iData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1250, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1250, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1250, 420,   0,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_StYPbPr525iData[]=
+{
+ {    1,   1, 858, 525,1270, 400,  50,   0, 760},
+ {    1,   1, 858, 525,1270, 350,  50,   0, 640},
+ {    1,   1, 858, 525,1270, 400,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 350,   0,   0, 720},
+ {    1,   1, 858, 525,1270, 480,   0,   0, 760},
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr525pData[]=
+{
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
+ {   12,  5,  858, 403,1270, 420, 171,   0, 171},
+ {  143,  80, 836, 523,1270, 420, 224,   0,   0},
+ {  143, 120,1008, 643,1270, 420,   0,   1,   0},
+ {   1,    1,1120, 821,1516, 420,   0,   1,   0}, /*301b*/
+ {    2,   1, 858, 503,1584, 480,   0,   1,   0},
+ {    3,   2,1001, 533,1270, 420,   0,   0,   0}
+ };
+
+XGI330_TVDataStruct  XGI_StYPbPr525pData[]=
+{
+ {    1,   1,1716, 525,1270, 400,  50,   0, 760},
+ {    1,   1,1716, 525,1270, 350,  50,   0, 640},
+ {    1,   1,1716, 525,1270, 400,   0,   0, 720},
+ {    1,   1,1716, 525,1270, 350,   0,   0, 720},
+ {    1,   1,1716, 525,1270, 480,   0,   0, 760},
+};
+
+XGI330_TVDataStruct  XGI_ExtYPbPr750pData[]=
+{
+ {    3,   1, 935, 470,1130, 680,  50,   0,   0},       /* 00 (320x200,320x400,640x200,640x400) */
+ {   24,   7, 935, 420,1130, 680,  50,   0,   0},       /* 01 (320x350,640x350) */
+ {    3,   1, 935, 470,1130, 680,  50,   0,   0},       /* 02 (360x400,720x400) */
+ {   24,   7, 935, 420,1130, 680,  50,   0,   0},       /* 03 (720x350) */
+ {    2,   1,1100, 590,1130, 640,  50,   0,   0},       /* 04 (320x240,640x480) */
+ {    3,   2,1210, 690,1130, 660,  50,   0,   0},       /* 05 (400x300,800x600) */
+ {    1,   1,1375, 878,1130, 640, 638,   0,   0},       /* 06 (1024x768) */
+ {    2,   1, 858, 503,1130, 480,   0,   1,   0},        /* 07 (720x480) */
+ {    5,   4,1815, 570,1130, 660,  50,   0,   0},
+ {    5,   3,1100, 686,1130, 640,  50,   1,   0},
+ {   10,   9,1320, 830,1130, 640,  50,   0,   0}
+};
+
+XGI330_TVDataStruct  XGI_StYPbPr750pData[]=
+{
+ {    1,   1,1650, 750,1280, 400,  50,   0, 760},
+ {    1,   1,1650, 750,1280, 350,  50,   0, 640},
+ {    1,   1,1650, 750,1280, 400,   0,   0, 720},
+ {    1,   1,1650, 750,1280, 350,   0,   0, 720},
+ {    1,   1,1650, 750,1280, 480,   0,   0, 760},
+};
+
+UCHAR XGI330_NTSCTiming[] = {
+  0x17,0x1d,0x03,0x09,0x05,0x06,0x0c,0x0c,
+  0x94,0x49,0x01,0x0a,0x06,0x0d,0x04,0x0a,
+  0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x1b,
+  0x0c,0x50,0x00,0x97,0x00,0xda,0x4a,0x17,
+  0x7d,0x05,0x4b,0x00,0x00,0xe2,0x00,0x02,
+  0x03,0x0a,0x65,0x9d,0x08,0x92,0x8f,0x40,
+  0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x50,
+  0x00,0x40,0x44,0x00,0xdb,0x02,0x3b,0x00};
+
+UCHAR XGI330_PALTiming[] = {
+  0x21,0x5A,0x35,0x6e,0x04,0x38,0x3d,0x70,
+  0x94,0x49,0x01,0x12,0x06,0x3e,0x35,0x6d,
+  0x06,0x14,0x3e,0x35,0x6d,0x00,0x45,0x2b,
+  0x70,0x50,0x00,0x9b,0x00,0xd9,0x5d,0x17,
+  0x7d,0x05,0x45,0x00,0x00,0xe8,0x00,0x02,
+  0x0d,0x00,0x68,0xb0,0x0b,0x92,0x8f,0x40,
+  0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x63,
+  0x00,0x40,0x3e,0x00,0xe1,0x02,0x28,0x00};
+
+UCHAR XGI330_HiTVExtTiming[] =
+{
+      0x2D,0x60,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+      0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+      0x8E,0x8E,0x82,0x07,0x0B,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x3D,0x63,0x4F,
+      0x27,0x00,0xfc,0xff,0x6a,0x00
+
+};
+
+UCHAR XGI330_HiTVSt1Timing[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x65,0x90,0x7B,0xA8,0x03,0xF0,0x87,0x03,
+      0x11,0x15,0x11,0xCF,0x10,0x11,0xCF,0x10,
+      0x35,0x35,0x3B,0x69,0x1D,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x04,0x86,0xAF,0x5D,
+      0x0E,0x00,0xfc,0xff,0x2d,0x00
+};
+
+UCHAR XGI330_HiTVSt2Timing[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x64,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x64,0x90,0x33,0x8C,0x18,0x36,0x3E,0x13,
+      0x2A,0xDE,0x2A,0x44,0x40,0x2A,0x44,0x40,
+      0x8E,0x8E,0x82,0x07,0x0B,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x3D,0x63,0x4F,
+      0x27,0x00,0xFC,0xff,0x6a,0x00
+};
+
+UCHAR XGI330_HiTVTextTiming[] =
+{
+      0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
+      0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
+      0x06,0x14,0x3E,0x35,0x6D,0x00,0xC5,0x3F,
+      0x65,0x90,0xE7,0xBC,0x03,0x0C,0x97,0x03,
+      0x14,0x78,0x14,0x08,0x20,0x14,0x08,0x20,
+      0xC8,0xC8,0x3B,0xD2,0x26,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x04,0x96,0x72,0x5C,
+      0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr750pTiming[] =
+{
+      0x30,0x1d,0xe8,0x09,0x09,0xed,0x0c,0x0c,
+      0x98,0x0a,0x01,0x0c,0x06,0x0d,0x04,0x0a,
+      0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+      0xed,0x50,0x70,0x9f,0x16,0x59,0x60,0x13,
+      0x27,0x0b,0x27,0xfc,0x30,0x27,0x1c,0xb0,
+      0x4b,0x4b,0x6f,0x2f,0x63,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x73,0x00,0x40,
+      0x11,0x00,0xfc,0xff,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525pTiming[] =
+{
+      0x3E,0x11,0x06,0x09,0x0b,0x0c,0x0c,0x0c,
+      0x98,0x0a,0x01,0x0d,0x06,0x0d,0x04,0x0a,
+      0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x3f,
+      0x0c,0x50,0xb2,0x9f,0x16,0x59,0x4f,0x13,
+      0xad,0x11,0xad,0x1d,0x40,0x8a,0x3d,0xb8,
+      0x51,0x5e,0x60,0x49,0x7d,
+      0x92,0x0F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x4B,0x43,0x41,
+      0x11,0x00,0xFC,0xFF,0x32,0x00
+};
+
+UCHAR XGI330_YPbPr525iTiming[] =
+{
+      0x1B,0x21,0x03,0x09,0x05,0x06,0x0C,0x0C,
+      0x94,0x49,0x01,0x0A,0x06,0x0D,0x04,0x0A,
+      0x06,0x14,0x0D,0x04,0x0A,0x00,0x85,0x1B,
+      0x0C,0x50,0x00,0x97,0x00,0xDA,0x4A,0x17,
+      0x7D,0x05,0x4B,0x00,0x00,0xE2,0x00,0x02,
+      0x03,0x0A,0x65,0x9D,0x08,
+      0x92,0x8F,0x40,0x60,0x80,0x14,0x90,0x8C,
+      0x60,0x14,0x4B,0x00,0x40,
+      0x44,0x00,0xDB,0x02,0x3B,0x00
+
+};
+
+UCHAR XGI330_HiTVGroup3Data[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x5F,
+      0x05,0x21,0xB2,0xB2,0x55,0x77,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x2E,0x58,0x48,0x72,0x44,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x4F,0x7F,0x03,0xA8,0x7D,0x20,0x1A,0xA9,
+      0x14,0x05,0x03,0x7E,0x64,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Simu[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x95,
+      0xDB,0x20,0xB8,0xB8,0x55,0x47,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x15,0x26,0xD3,0xE4,0x11,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x67,0x36,0x01,0x47,0x0E,0x10,0xBE,0xB4,
+      0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_HiTVGroup3Text[] =
+{
+      0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0xA7,
+      0xF5,0x20,0xCE,0xCE,0x55,0x47,0x2A,0xA6,
+      0x25,0x2F,0x47,0xFA,0xC8,0xFF,0x8E,0x20,
+      0x8C,0x6E,0x60,0x18,0x2C,0x0C,0x20,0x22,
+      0x56,0x36,0x4F,0x6E,0x3F,0x80,0x00,0x80,
+      0x93,0x3C,0x01,0x50,0x2F,0x10,0xF4,0xCA,
+      0x01,0x05,0x03,0x7E,0x65,0x31,0x14,0x75,
+      0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
+};
+
+UCHAR XGI330_Ren525pGroup3[] =
+{
+  0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x13,
+  0xB1,0x41,0x62,0x62,0xFF,0xF4,0x45,0xa6,
+  0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+  0xAC,0xDA,0x60,0xFe,0x6A,0x9A,0x06,0x10,
+  0xd1,0x04,0x18,0x0a,0xFF,0x80,0x00,0x80,
+  0x3c,0x77,0x00,0xEF,0xE0,0x10,0xB0,0xE0,
+  0x10,0x4F,0x0F,0x0F,0x05,0x0F,0x08,0x6E,
+  0x1a,0x1F,0x25,0x2a,0x4C,0xAA,0x01
+};
+
+UCHAR XGI330_Ren750pGroup3[] =
+{
+  0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x7a,
+  0x54,0x41,0xE7,0xE7,0xFF,0xF4,0x45,0xa6,
+  0x25,0x2F,0x67,0xF6,0xbf,0xFF,0x8E,0x20,
+  0xAC,0x6A,0x60,0x2b,0x52,0xCD,0x61,0x10,
+  0x51,0x04,0x18,0x0a,0x1F,0x80,0x00,0x80,
+  0xFF,0xA4,0x04,0x2B,0x94,0x21,0x72,0x94,
+  0x26,0x05,0x01,0x0F,0xed,0x0F,0x0A,0x64,
+  0x18,0x1D,0x23,0x28,0x4C,0xAA,0x01
+};
+
+XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[]=
+{
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}},
+{{0x00,0x00}}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS320x480Data_1[]=
+{
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 433,400,525},
+ {848, 389,400,525},
+ {848, 518,400, 525},
+ {1056, 628,400,525},
+ {400, 525,400,525},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_1[]=
+{
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 433,1060, 629},
+ {848, 389,1060, 629},
+ {848, 518,1060, 629},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_2[]=
+{
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {800, 449,1000, 644},
+ {800, 525,1000, 635}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_1[]=
+{
+ { 960 , 438 , 1344 , 806 } ,	/* 00 (320x200,320x400,640x200,640x400) */
+ { 960 , 388 , 1344 , 806 } ,	/* 01 (320x350,640x350) */
+ { 1040, 438 , 1344 , 806 } ,	/* 02 (360x400,720x400) */
+ { 1040, 388 , 1344 , 806 } ,	/* 03 (720x350) */
+ { 960 , 518 , 1344 , 806 } ,	/* 04 (320x240,640x480) */
+ {1120 , 638 , 1344 , 806 } ,	/* 05 (400x300,800x600) */
+ {1344 , 806 , 1344 , 806 }	/* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_1[]=
+{
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 442,1688, 1066},
+ {1048, 392,1688, 1066},
+ {1048, 522,1688, 1066},
+ {1208, 642,1688, 1066},
+ {1432, 810,1688, 1066},
+ {1688, 1066,1688, 1066}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {800, 449,1280, 801},
+ {800, 525,1280, 813}
+};
+/*
+XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_1[]=
+{
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,438,1408,806},
+ {768,388,1408,806},
+ {768,518,1408,806},
+ {928,638,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806},
+ {1408,806,1408,806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_2[]=
+{
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806},
+ {1408, 806,1408, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_1[]=
+{
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 438,1344, 806},
+ {704, 388,1344, 806},
+ {704, 518,1344, 806},
+ {864, 638,1344, 806},
+ {1088, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_2[]=
+{
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806},
+ {1344, 806,1344, 806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_1[]=
+{
+ {1048,438,1688,806},
+ {1048,388,1688,806},
+ {1148,438,1688,806},
+ {1148,388,1688,806},
+ {1048,518,1688,806},
+ {1208,638,1688,806},
+ {1432,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_2[]=
+{
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806},
+ {1688,806,1688,806}
+};
+*/
+XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_1[]=
+{
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,416,1688,1066},
+ {928,366,1688,1066},
+ {928,496,1688,1066},
+ {1088,616,1688,1066},
+ {1312,784,1688,1066},
+ {1568,1040,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_2[]=
+{
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066},
+ {1688,1066,1688,1066}
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[]=
+{      /* ;;[ycchen] 12/05/02 LCDHTxLCDVT=2048x1320 */
+        {        1088,520,2048,1320      },/* 00 (320x200,320x400,640x200,640x400) */
+        {        1088,470,2048,1320      },/* 01 (320x350,640x350) */
+        {        1088,520,2048,1320      },/* 02 (360x400,720x400) */
+        {        1088,470,2048,1320      },/* 03 (720x350) */
+        {        1088,600,2048,1320      },/* 04 (320x240,640x480) */
+        {        1248,720,2048,1320      },/* 05 (400x300,800x600) */
+        {        1472,888,2048,1320      },/* 06 (512x384,1024x768) */
+        {        1728,1144,2048,1320     },/* 07 (640x512,1280x1024) */
+        {        1848,1170,2048,1320     },/* 08 (1400x1050) */
+        {        2048,1320,2048,1320     } /* 09 (1600x1200) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingData[]=
+{
+        {        800,449,800,449             }, /* 00 (320x200,320x400,640x200,640x400) */
+        {        800,449,800,449             }, /* 01 (320x350,640x350) */
+        {        800,449,800,449             }, /* 02 (360x400,720x400) */
+        {        800,449,800,449             }, /* 03 (720x350) */
+        {        800,525,800,525             }, /* 04 (640x480x60Hz) */
+        {        1056,628,1056,628           }, /* 05 (800x600x60Hz) */
+        {        1344,806,1344,806           }, /* 06 (1024x768x60Hz) */
+        {        1688,1066,1688,1066         }, /* 07 (1280x1024x60Hz) */
+        {        1688,1066,1688,1066         }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {        2160,1250,2160,1250         }, /* 09 (1600x1200x60Hz) */
+        {        1688,806,1688,806           }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[]=
+{
+	{960,438,1312,800  }, /* 00 (320x200,320x400,640x200,640x400) */
+        {960,388,1312,800  }, /* 01 (320x350,640x350) */
+        {1040,438,1312,800 }, /* 02 (360x400,720x400) */
+        {1040,388,1312,800 }, /* 03 (720x350) */
+        {928,512,1312,800  }, /* 04 (320x240,640x480) */
+        {1088,632,1312,800 }, /* 05 (400x300,800x600) */
+        {1312,800,1312,800 }, /* 06 (512x384,1024x768) */
+};
+
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[]=
+{
+        {1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1312,800,1312,800}, /* ; 01 (320x350,640x350) */
+        {1312,800,1312,800}, /* ; 02 (360x400,720x400) */
+        {1312,800,1312,800}, /* ; 03 (720x350) */
+        {1312,800,1312,800}, /* ; 04 (320x240,640x480) */
+        {1312,800,1312,800}, /* ; 05 (400x300,800x600) */
+        {1312,800,1312,800}, /* ; 06 (512x384,1024x768) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[]=
+{
+        {1048,442,1688,1066  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1048,392,1688,1066  }, /* ; 01 (320x350,640x350) */
+        {1128,442,1688,1066  }, /* ; 02 (360x400,720x400) */
+        {1128,392,1688,1066  }, /* ; 03 (720x350) */
+        {1048,522,1688,1066  }, /* ; 04 (320x240,640x480) */
+        {1208,642,1688,1066  }, /* ; 05 (400x300,800x600) */
+        {1432,810,1688,1066  }, /* ; 06 (512x384,1024x768) */
+        {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[]=
+{
+        {1688,1066,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1688,1066,1688,1066 }, /* ; 01 (320x350,640x350) */
+        {1688,1066,1688,1066 }, /* ; 02 (360x400,720x400) */
+        {1688,1066,1688,1066 }, /* ; 03 (720x350) */
+        {1688,1066,1688,1066 }, /* ; 04 (320x240,640x480) */
+        {1688,1066,1688,1066 }, /* ; 05 (400x300,800x600) */
+        {1688,1066,1688,1066 }, /* ; 06 (512x384,1024x768) */
+        {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[]=
+{
+        {800,449,800,449     }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {800,449,800,449     }, /* ; 01 (320x350,640x350) */
+        {900,449,900,449     }, /* ; 02 (360x400,720x400) */
+        {900,449,900,449     }, /* ; 03 (720x350) */
+        {800,500,800,500     }, /* ; 04 (640x480x75Hz) */
+        {1056,625,1056,625   }, /* ; 05 (800x600x75Hz) */
+        {1312,800,1312,800   }, /* ; 06 (1024x768x75Hz) */
+        {1688,1066,1688,1066 }, /* ; 07 (1280x1024x75Hz) */
+        {1688,1066,1688,1066 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+        {2160,1250,2160,1250 }, /* ; 09 (1600x1200x75Hz) */
+        {1688,806,1688,806   }, /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[]=
+{
+	{      0,1048,   0, 771     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1048,   0, 771     }, /* 01 (320x350,640x350) */
+        {      0,1048,   0, 771     }, /* 02 (360x400,720x400) */
+        {      0,1048,   0, 771     }, /* 03 (720x350) */
+        {      0,1048,   0, 771     }, /* 04 (640x480x60Hz) */
+        {      0,1048,   0, 771     }, /* 05 (800x600x60Hz) */
+        {      0,1048, 805, 770     }  /* 06 (1024x768x60Hz) */
+} ;
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[]=
+{
+    	{      1142, 856, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1142, 856, 597, 562     }, /* 01 (320x350,640x350) */
+        {      1142, 856, 622, 587     }, /* 02 (360x400,720x400) */
+        {      1142, 856, 597, 562     }, /* 03 (720x350) */
+        {      1142,1048, 722, 687     }, /* 04 (640x480x60Hz) */
+        {      1232, 936, 722, 687     }, /* 05 (800x600x60Hz) */
+        {         0,1048, 805, 771     }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[]=
+{
+    	{       320,  24, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {       320,  24, 597, 562     }, /* 01 (320x350,640x350) */
+        {       320,  24, 622, 587     }, /* 02 (360x400,720x400) */
+        {       320,  24, 597, 562     }, /* 03 (720x350) */
+        {       320,  24, 722, 687     }  /* 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[]=
+{
+    	{      0,1328,    0, 1025     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1328,    0, 1025     }, /* 01 (320x350,640x350) */
+        {      0,1328,    0, 1025     }, /* 02 (360x400,720x400) */
+        {      0,1328,    0, 1025     }, /* 03 (720x350) */
+        {      0,1328,    0, 1025     }, /* 04 (640x480x60Hz) */
+        {      0,1328,    0, 1025     }, /* 05 (800x600x60Hz) */
+        {      0,1328,    0, 1025     }, /* 06 (1024x768x60Hz) */
+        {      0,1328, 1065, 1024     }  /* 07 (1280x1024x60Hz) */
+};
+
+ /* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[]=
+{
+    	{      1368,1008,752,711     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1368,1008,729,688     }, /* 01 (320x350,640x350) */
+        {      1408,1048,752,711     }, /* 02 (360x400,720x400) */
+        {      1408,1048,729,688     }, /* 03 (720x350) */
+        {      1368,1008,794,753     }, /* 04 (640x480x60Hz) */
+        {      1448,1068,854,813     }, /* 05 (800x600x60Hz) */
+        {      1560,1200,938,897     }, /* 06 (1024x768x60Hz) */
+        {      0000,1328,0,1025     }  /* 07 (1280x1024x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[]=
+{
+    	{      0,1448,0,1051     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1448,0,1051     }, /* 01 (320x350,640x350) */
+        {      0,1448,0,1051     }, /* 02 (360x400,720x400) */
+        {      0,1448,0,1051     }, /* 03 (720x350) */
+        {      0,1448,0,1051     }, /* 04 (640x480x60Hz) */
+        {      0,1448,0,1051     }, /* 05 (800x600x60Hz) */
+        {      0,1448,0,1051     }, /* 06 (1024x768x60Hz) */
+        {      0,1448,0,1051     }, /* 07 (1280x1024x60Hz) */
+        {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[]=
+{
+    	{      1308,1068, 781, 766     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      1308,1068, 781, 766     }, /* 01 (320x350,640x350) */
+        {      1308,1068, 781, 766     }, /* 02 (360x400,720x400) */
+        {      1308,1068, 781, 766     }, /* 03 (720x350) */
+        {      1308,1068, 781, 766     }, /* 04 (640x480x60Hz) */
+        {      1388,1148, 841, 826     }, /* 05 (800x600x60Hz) */
+        {      1490,1250, 925, 910     }, /* 06 (1024x768x60Hz) */
+        {      1608,1368,1053,1038     }, /* 07 (1280x1024x60Hz) */
+        {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[]=
+{
+    	{      0,1664,0,1201     }, /* 00 (320x200,320x400,640x200,640x400) */
+        {      0,1664,0,1201     }, /* 01 (320x350,640x350) */
+        {      0,1664,0,1201     }, /* 02 (360x400,720x400) */
+        {      0,1664,0,1201     }, /* 03 (720x350) */
+        {      0,1664,0,1201     }, /* 04 (640x480x60Hz) */
+        {      0,1664,0,1201     }, /* 05 (800x600x60Hz) */
+        {      0,1664,0,1201     }, /* 06 (1024x768x60Hz) */
+        {      0,1664,0,1201     }, /* 07 (1280x1024x60Hz) */
+        {      0,1664,0,1201     }, /* 08 (1400x1050x60Hz) */
+        {      0,1664,0,1201     }  /* 09 (1600x1200x60Hz) */
+};
+
+
+
+XGI330_LCDDataDesStruct2  XGI_LVDSNoScalingDesData[]=
+{
+    	{     0, 648, 448, 405,  96,   2   }, /* 00 (320x200,320x400,640x200,640x400) */
+        {     0, 648, 448, 355,  96,   2   }, /* 01 (320x350,640x350) */
+        {     0, 648, 448, 405,  96,   2   }, /* 02 (360x400,720x400) */
+        {     0, 648, 448, 355,  96,   2   }, /* 03 (720x350) */
+        {     0, 648,  1, 483,  96,   2   }, /* 04 (640x480x60Hz) */
+        {     0, 840, 627, 600, 128,   4   }, /* 05 (800x600x60Hz) */
+        {     0,1048, 805, 770, 136,   6   }, /* 06 (1024x768x60Hz) */
+        {     0,1328,0,1025, 112,   3   }, /* 07 (1280x1024x60Hz) */
+        {     0,1438,0,1051, 112,   3   }, /* 08 (1400x1050x60Hz) ;;[ycchen] 12/19/02 */
+        {     0,1664,0,1201, 192,   3   }, /* 09 (1600x1200x60Hz) */
+        {     0,1328,0,0771, 112,   6   }  /* 0A (1280x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[]=			/* ; 1024x768 Full-screen */
+{
+        {0,1040,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {0,1040,0,769}, /* ; 01 (320x350,640x350) */
+        {0,1040,0,769}, /* ; 02 (360x400,720x400) */
+        {0,1040,0,769}, /* ; 03 (720x350) */
+        {0,1040,0,769}, /* ; 04 (640x480x75Hz) */
+        {0,1040,0,769}, /* ; 05 (800x600x75Hz) */
+        {0,1040,0,769} /* ; 06 (1024x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[]= /* ; 1024x768 center-screen (Enh. Mode) */
+{
+        {1142, 856,622,587 }, /* 00 (320x200,320x400,640x200,640x400) */
+        {1142, 856,597,562 }, /* 01 (320x350,640x350) */
+        {1142, 856,622,587 }, /* 02 (360x400,720x400) */
+        {1142, 856,597,562 }, /* 03 (720x350) */
+        {1142,1048,722,687 }, /* 04 (640x480x60Hz) */
+        {1232, 936,722,687 }, /* 05 (800x600x60Hz) */
+        {   0,1048,805,771 }  /* 06 (1024x768x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[]= /* ; 1024x768 center-screen (St.Mode) */
+{
+        {320,24,622,587  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {320,24,597,562  }, /* ; 01 (320x350,640x350) */
+        {320,24,622,587  }, /* ; 02 (360x400,720x400) */
+        {320,24,597,562  }, /* ; 03 (720x350) */
+        {320,24,722,687  } /* ; 04 (640x480x60Hz) */
+};
+
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[]=
+{
+        {0,1296,0,1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {0,1296,0,1025}, /* ; 01 (320x350,640x350) */
+        {0,1296,0,1025}, /* ; 02 (360x400,720x400) */
+        {0,1296,0,1025}, /* ; 03 (720x350) */
+        {0,1296,0,1025}, /* ; 04 (640x480x75Hz) */
+        {0,1296,0,1025}, /* ; 05 (800x600x75Hz) */
+        {0,1296,0,1025}, /* ; 06 (1024x768x75Hz) */
+        {0,1296,0,1025} /* ; 07 (1280x1024x75Hz) */
+};
+
+/* The Display setting for DE Mode Panel */
+XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[]=   /* [ycchen] 02/18/03 Set DE as default */
+{
+        {1368,976,752,711 }, /* ; 00 (320x200,320x400,640x200,640x400) */
+        {1368,976,729,688 }, /* ; 01 (320x350,640x350) */
+        {1408,976,752,711 }, /* ; 02 (360x400,720x400) */
+        {1408,976,729,688 }, /* ; 03 (720x350) */
+        {1368,976,794,753 }, /* ; 04 (640x480x75Hz) */
+        {1448,1036,854,813}, /* ; 05 (800x600x75Hz) */
+        {1560,1168,938,897}, /* ; 06 (1024x768x75Hz) */
+        {0,1296,0,1025    } /* ; 07 (1280x1024x75Hz) */
+};
+
+XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[]=  /* Scaling LCD 75Hz */
+{
+       { 0,648,448,405,96,2  }, /* ; 00 (320x200,320x400,640x200,640x400) */
+       { 0,648,448,355,96,2  }, /* ; 01 (320x350,640x350) */
+       { 0,729,448,405,108,2 }, /* ; 02 (360x400,720x400) */
+       { 0,729,448,355,108,2 }, /* ; 03 (720x350) */
+       { 0,656,0,481,64,3    }, /* ; 04 (640x480x75Hz) */
+       { 0,816,0,601,80,3    }, /* ; 05 (800x600x75Hz) */
+       { 0,1040,0,769,96,3   }, /* ; 06 (1024x768x75Hz) */
+       { 0,1296,0,1025,144,3 }, /* ; 07 (1280x1024x75Hz) */
+       { 0,1448,0,1051,112,3 }, /* ; 08 (1400x1050x75Hz) ;;[ycchen] 12/19/02 */
+       { 0,1664,0,1201,192,3 }, /* ; 09 (1600x1200x75Hz) */
+       { 0,1328,0,771,112,6  }  /* ; 0A (1280x768x75Hz) */
+};
+
+XGI330_LVDSDataStruct  XGI330_LVDS640x480Data_1[]=
+{
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 449, 800, 449},
+ {800, 525, 800, 525},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628},
+ {1056, 628,1056, 628}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVUNTSCData[]=
+{
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {840, 600, 840, 600},
+ {784, 600, 784, 600},
+ {1064, 750,1064, 750}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVONTSCData[]=
+{
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {840, 525, 840, 525},
+ {784, 525, 784, 525},
+ {1040, 700,1040, 700}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVUPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 750, 840, 750},
+ {936, 836, 936, 836}
+};
+
+XGI330_CHTVDataStruct  XGI_CHTVOPALData[]=
+{
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {1008, 625,1008, 625},
+ {840, 625, 840, 625},
+ {960, 750, 960, 750}
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_1_H[]=
+{
+	        /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }}, /* 00 (320x) */
+                {{      0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }}, /* 01 (360x) */
+                {{      0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }}, /* 02 (400x) */
+                {{      0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 04 (640x) */
+                {{      0x73,0x4F,0x97,0x55,0x86,0x00,0x05,0x00 }}, /* 05 (720x) */
+                {{      0x87,0x63,0x8B,0x69,0x1A,0x00,0x26,0x00 }}, /* 06 (800x) */
+                {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_1_H[]=
+{
+		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 00 (320x) */
+                {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+                {{      0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 04 (640x) */
+                {{      0x7E,0x4F,0x82,0x58,0x06,0x00,0x06,0x00 }}, /* 05 (720x) */
+                {{      0x92,0x63,0x96,0x6C,0x1A,0x00,0x06,0x00 }}, /* 06 (800x) */
+                {{      0xAE,0x7F,0x92,0x88,0x96,0x00,0x02,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_2_H[]=
+{
+		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 00 (320x) */
+                {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 01 (360x) */
+                {{      0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 04 (640x) */
+                {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }}, /* 05 (720x) */
+                {{      0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }}, /* 06 (800x) */
+                {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
+};
+
+XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_2_H[]=
+{
+                /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 00 (320x) */
+                {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 01 (360x) */
+                {{      0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 04 (640x) */
+                {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }}, /* 05 (720x) */
+                {{      0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }}, /* 06 (800x) */
+                {{      0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[]=
+{               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x47,0x27,0x8B,0x2C,0x1A,0x00,0x05,0x00 }}, /* 00 (320x) */
+                {{      0x47,0x27,0x8B,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
+                {{      0x51,0x31,0x95,0x36,0x04,0x00,0x01,0x00 }}, /* 02 (400x) */
+                {{      0x5F,0x3F,0x83,0x44,0x92,0x00,0x01,0x00 }}, /* 03 (512x) */
+                {{      0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 04 (640x) */
+                {{      0x6F,0x4F,0x93,0x54,0x82,0x00,0x05,0x00 }}, /* 05 (720x) */
+                {{      0x83,0x63,0x87,0x68,0x16,0x00,0x06,0x00 }}, /* 06 (800x) */
+                {{      0x9F,0x7F,0x83,0x84,0x92,0x00,0x02,0x00 }}, /* 07 (1024x) */
+                {{      0xBF,0x9F,0x83,0xA4,0x12,0x00,0x07,0x00 }}, /* 08 (1280x) */
+                {{      0xCE,0xAE,0x92,0xB3,0x01,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[]=
+{               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 00 (320x) */
+                {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 01 (360x) */
+                {{      0x76,0x31,0x9A,0x48,0x9F,0x00,0x41,0x00 }}, /* 02 (400x) */
+                {{      0x76,0x3F,0x9A,0x4F,0x96,0x00,0x41,0x00 }}, /* 03 (512x) */
+                {{      0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 04 (640x) */
+                {{      0xCE,0x7E,0x82,0x87,0x9E,0x00,0x02,0x00 }}, /* 05 (720x) */
+                {{      0xCE,0x63,0x92,0x96,0x04,0x00,0x07,0x00 }}, /* 06 (800x) */
+                {{      0xCE,0x7F,0x92,0xA4,0x12,0x00,0x07,0x00 }}, /* 07 (1024x) */
+                {{      0xCE,0x9F,0x92,0xB4,0x02,0x00,0x03,0x00 }}, /* 08 (1280x) */
+                {{      0xCE,0xAE,0x92,0xBC,0x0A,0x00,0x03,0x00 }} /* 09 (1400x) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[]=
+/* ;302lv channelA [ycchen] 12/05/02 LCDHT=2048 */
+{   /* ; CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+                {{      0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 00 (320x) */
+                {{      0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 01 (360x) */
+                {{      0x65,0x31,0x89,0x3C,0x94,0x00,0x01,0x00 }},/* 02 (400x) */
+                {{      0x73,0x3F,0x97,0x4A,0x82,0x00,0x05,0x00 }},/* 03 (512x) */
+                {{      0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 04 (640x) */
+		{{      0x83,0x4F,0x87,0x51,0x09,0x00,0x06,0x00 }},/* 05 (720x) */
+		{{      0x97,0x63,0x9B,0x65,0x1D,0x00,0x06,0xF0 }},/* 06 (800x) */
+		{{      0xB3,0x7F,0x97,0x81,0x99,0x00,0x02,0x00 }},/* 07 (1024x) */
+		{{      0xD3,0x9F,0x97,0xA1,0x19,0x00,0x07,0x00 }},/* 08 (1280x) */
+		{{      0xE2,0xAE,0x86,0xB9,0x91,0x00,0x03,0x00 }},/* 09 (1400x) */
+		{{      0xFB,0xC7,0x9F,0xC9,0x81,0x00,0x07,0x00 }} /* 0A (1600x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+                {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }}, /* 00 (x350) */
+                {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }}, /* 01 (x400) */
+                {{      0x04,0x3E,0xE2,0x89,0xDF,0x05,0x00      }}, /* 02 (x480) */
+                {{      0x7C,0xF0,0x5A,0x8F,0x57,0x7D,0xA0      }}, /* 03 (x600) */
+                {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }}, /* 00 (x350) */
+                {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }}, /* 01 (x400) */
+                {{      0x24,0xBB,0x72,0x88,0xDF,0x25,0x30      }}, /* 02 (x480) */
+                {{      0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0      }}, /* 03 (x600) */
+                {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{       0x86,0x1F,0x5E,0x82,0x5D,0x87,0x00     }}, /* 00 (x350) */
+                {{       0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30     }}, /* 01 (x400) */
+                {{       0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00     }}, /* 02 (x480) */
+                {{       0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0     }}, /* 03 (x600) */
+                {{       0x28,0xF5,0x00,0x84,0xFF,0x29,0x90     }}, /* 04 (x768) */
+                {{       0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1      }}, /* 00 (x350) */
+                {{      0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81      }}, /* 01 (x400) */
+                {{      0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1      }}, /* 02 (x480) */
+                {{      0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91      }}, /* 03 (x600) */
+                {{      0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91      }}, /* 04 (x768) */
+                {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* 05 (x1024) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[]=
+{               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x6C,0x1F,0x60,0x84,0x5D,0x6D,0x10      }}, /* 00 (x350) */
+                {{      0x9E,0x1F,0x93,0x86,0x8F,0x9F,0x30      }}, /* 01 (x400) */
+                {{      0xEE,0x1F,0xE2,0x86,0xDF,0xEF,0x10      }}, /* 02 (x480) */
+                {{      0x66,0xF0,0x5A,0x8e,0x57,0x67,0xA0      }}, /* 03 (x600) */
+                {{      0x0E,0xF5,0x02,0x86,0xFF,0x0F,0x90      }}, /* 04 (x768) */
+                {{      0x0E,0x5A,0x02,0x86,0xFF,0x0F,0x89      }}, /* 05 (x1024) */
+                {{      0x28,0x10,0x1A,0x80,0x19,0x29,0x0F      }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[]=
+{              /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+                {{      0x28,0x92,0xB6,0x83,0xB5,0xCF,0x81      }}, /* 00 (x350) */
+                {{      0x28,0x92,0xD5,0x82,0xD4,0xEE,0x81      }}, /* 01 (x400) */
+                {{      0x28,0x92,0xFD,0x8A,0xFC,0x16,0xB1      }}, /* 02 (x480) */
+                {{      0x28,0xD4,0x39,0x86,0x57,0x29,0x81      }}, /* 03 (x600) */
+                {{      0x28,0xD4,0x8D,0x9A,0xFF,0x29,0xA1      }}, /* 04 (x768) */
+                {{      0x28,0x5A,0x0D,0x9A,0xFF,0x29,0xA9      }}, /* 05 (x1024) */
+                {{      0x28,0x10,0x1A,0x87,0x19,0x29,0x8F      }} /* 06 (x1050) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[]=
+{
+               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+                {{      0xd4,0x1F,0x81,0x84,0x5D,0xd5,0x10      }}, /* 00 (x350) */
+                {{      0x06,0x3e,0xb3,0x86,0x8F,0x07,0x20      }}, /* 01 (x400) */
+                {{      0x56,0xba,0x03,0x86,0xDF,0x57,0x00      }}, /* 02 (x480) */
+                {{      0xce,0xF0,0x7b,0x8e,0x57,0xcf,0xa0      }}, /* 03 (x600) */
+                {{      0x76,0xF5,0x23,0x86,0xFF,0x77,0x90      }}, /* 04 (x768) */
+                {{      0x76,0x5A,0x23,0x86,0xFF,0x77,0x89      }}, /* 05 (x1024) */
+                {{      0x90,0x10,0x1A,0x8E,0x19,0x91,0x2F      }}, /* 06 (x1050) */
+                {{      0x26,0x11,0xd3,0x86,0xaF,0x27,0x3f      }} /* 07 (x1200) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[]=
+{ 	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }},/* ; 00 (320x) */
+    {{      0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }},/* ; 01 (360x) */
+    {{      0x55,0x31,0x99,0x46,0x1D,0x00,0x55,0x00 }},/* ; 02 (400x) */
+    {{      0x63,0x3F,0x87,0x4A,0x93,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 04 (640x) */
+    {{      0x6F,0x4F,0x93,0x54,0x80,0x00,0x05,0x00 }},/* ; 05 (720x) */
+    {{      0x83,0x63,0x87,0x68,0x14,0x00,0x26,0x00 }},/* ; 06 (800x) */
+    {{      0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[]=
+{	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
+    {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }},/* ; 00 (x350) */
+    {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }},/* ; 01 (x400) */
+    {{      0xFE,0x1F,0xE0,0x84,0xDF,0xFF,0x10      }},/* ; 02 (x480) */
+    {{      0x76,0xF0,0x58,0x8C,0x57,0x77,0xA0      }},/* ; 03 (x600) */
+    {{      0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90      }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[]=
+{       /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 00 (320x) */
+    {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 01 (360x) */
+    {{      0x63,0x31,0x87,0x3D,0x8E,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x63,0x3F,0x87,0x45,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 04 (640x) */
+    {{      0xA3,0x4F,0x87,0x6E,0x9F,0x00,0x06,0x00 }},/* ; 05 (720x) */
+    {{      0xA3,0x63,0x87,0x78,0x89,0x00,0x02,0x00 }},/* ; 06 (800x) */
+    {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* ; 07 (1024x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[]=
+{       /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+    {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }},/* ; 00 (x350) */
+    {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }},/* ; 01 (x400) */
+    {{      0x24,0xBB,0x72,0x88,0xDF,0x25,0x30      }},/* ; 02 (x480) */
+    {{      0x24,0xF1,0xAE,0x84,0x57,0x25,0xB0      }},/* ; 03 (x600) */
+    {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* ; 04 (x768) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[]=
+{      /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 00 (320x) */
+    {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 01 (360x) */
+    {{      0x60,0x31,0x84,0x3A,0x88,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x6E,0x3F,0x92,0x48,0x96,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 04 (640x) */
+    {{      0x7E,0x4F,0x82,0x54,0x06,0x00,0x06,0x00 }},/* ; 05 (720x) */
+    {{      0x92,0x63,0x96,0x68,0x1A,0x00,0x06,0x00 }},/* ; 06 (800x) */
+    {{      0xAE,0x7F,0x92,0x84,0x96,0x00,0x02,0x00 }},/* ; 07 (1024x) */
+    {{      0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[]=
+{	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+    {{      0x86,0xD1,0xBC,0x80,0xBB,0xE5,0x00      }},/* ; 00 (x350) */
+    {{      0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30      }},/* ; 01 (x400) */
+    {{      0x08,0x3E,0xE0,0x84,0xDF,0x09,0x00      }},/* ; 02 (x480) */
+    {{      0x80,0xF0,0x58,0x8C,0x57,0x81,0xA0      }},/* ; 03 (x600) */
+    {{      0x28,0xF5,0x00,0x84,0xFF,0x29,0x90      }},/* ; 04 (x768) */
+    {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[]=
+{
+	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
+    {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 00 (320x) */
+    {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 01 (360x) */
+    {{      0x7E,0x40,0x84,0x49,0x91,0x00,0x01,0x00 }},/* ; 02 (400x) */
+    {{      0x7E,0x47,0x93,0x50,0x9E,0x00,0x01,0x00 }},/* ; 03 (512x) */
+    {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 04 (640x) */
+    {{      0xCE,0x77,0x8A,0x80,0x8E,0x00,0x02,0x00 }},/* ; 05 (720x) */
+    {{      0xCE,0x81,0x94,0x8A,0x98,0x00,0x02,0x00 }},/* ; 06 (800x) */
+    {{      0xCE,0x8F,0x82,0x98,0x06,0x00,0x07,0x00 }},/* ; 07 (1024x) */
+    {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* ; 08 (1280x) */
+};
+
+XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[]=
+{
+        /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
+     {{     0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1     }},/* ; 00 (x350) */
+     {{     0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81     }},/* ; 01 (x400) */
+     {{     0x28,0xD2,0xF0,0x84,0xEF,0x1A,0xB1     }},/* ; 02 (x480) */
+     {{     0x28,0xDE,0x2C,0x8F,0x2B,0x56,0x91     }},/* ; 03 (x600) */
+     {{     0x28,0xDE,0x80,0x83,0x7F,0xAA,0x91     }},/* ; 04 (x768) */
+     {{     0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* ; 05 (x1024) */
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UNTSC[]=
+{
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
+    0xd0,0x82,0x5d,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x53,0x9c,0x56,0xba,
+    0x18,0x84,0xdf,0x57,0x00,0x00,0x01,0x00 }},
+ {{0x80,0x63,0x84,0x6c,0x17,0xec,0xf0,
+   0x90,0x8c,0x57,0xed,0x20,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1ONTSC[]=
+{
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
+ {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
+    0xb0,0x8d,0x5d,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x5d,0x4f,0x81,0x56,0x9c,0x0b,0x3e,
+    0xe8,0x84,0xdf,0x0c,0x00,0x00,0x01,0x00 }},
+ {{0x7d,0x63,0x81,0x6a,0x16,0xba,0xf0,
+   0x7f,0x86,0x57,0xbb,0x00,0x00,0x06,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0xec,0xba,
+    0x50,0x84,0xdf,0xed,0x00,0x00,0x05,0x00 }},
+ {{0x70,0x63,0x94,0x68,0x8d,0x42,0xf1,
+   0xc8,0x8c,0x57,0xe9,0x20,0x00,0x05,0x01 }}
+};
+
+XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1OPAL[]=
+{
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
+ {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
+    0xde,0x81,0x5d,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x64,0x4f,0x88,0x55,0x80,0x6f,0xba,
+    0x20,0x83,0xdf,0x70,0x00,0x00,0x05,0x00 }},
+ {{0x73,0x63,0x97,0x69,0x8e,0xec,0xf0,
+   0x90,0x8c,0x57,0xed,0x20,0x00,0x05,0x01 }}
+};
+
+/*add for new UNIVGABIOS*/
+XGI330_LCDDataTablStruct XGI_LCDDataTable[]=
+{
+  {Panel1024x768,0x0019,0x0001,0},  /* XGI_ExtLCD1024x768Data */
+  {Panel1024x768,0x0019,0x0000,1},  /* XGI_StLCD1024x768Data */
+  {Panel1024x768,0x0018,0x0010,2},  /* XGI_CetLCD1024x768Data */
+  {Panel1280x1024,0x0019,0x0001,3},  /* XGI_ExtLCD1280x1024Data */
+  {Panel1280x1024,0x0019,0x0000,4},  /* XGI_StLCD1280x1024Data */
+  {Panel1280x1024,0x0018,0x0010,5},  /* XGI_CetLCD1280x1024Data */
+  {Panel1400x1050,0x0019,0x0001,6},  /* XGI_ExtLCD1400x1050Data */
+  {Panel1400x1050,0x0019,0x0000,7},  /* XGI_StLCD1400x1050Data */
+  {Panel1400x1050,0x0018,0x0010,8},  /* XGI_CetLCD1400x1050Data */
+  {Panel1600x1200,0x0019,0x0001,9},   /* XGI_ExtLCD1600x1200Data */
+  {Panel1600x1200,0x0019,0x0000,10},  /* XGI_StLCD1600x1200Data */
+  {PanelRef60Hz,0x0008,0x0008,11},  	/* XGI_NoScalingData */
+  {Panel1024x768x75,0x0019,0x0001,12}, 	/* XGI_ExtLCD1024x768x75Data */
+  {Panel1024x768x75,0x0019,0x0000,13}, 	/* XGI_StLCD1024x768x75Data */
+  {Panel1024x768x75,0x0018,0x0010,14}, 	/* XGI_CetLCD1024x768x75Data */
+  {Panel1280x1024x75,0x0019,0x0001,15}, /* XGI_ExtLCD1280x1024x75Data */
+  {Panel1280x1024x75,0x0019,0x0000,16}, /* XGI_StLCD1280x1024x75Data */
+  {Panel1280x1024x75,0x0018,0x0010,17}, /* XGI_CetLCD1280x1024x75Data */
+  {PanelRef75Hz,0x0008,0x0008,18},	/* XGI_NoScalingDatax75 */
+  {0xFF,0x0000,0x0000,0}   		/* End of table */
+};
+
+XGI330_LCDDataTablStruct XGI_LCDDesDataTable[]=
+{
+  {Panel1024x768,0x0019,0x0001,0}, /* XGI_ExtLCDDes1024x768Data */
+  {Panel1024x768,0x0019,0x0000,1}, /* XGI_StLCDDes1024x768Data */
+  {Panel1024x768,0x0018,0x0010,2}, /* XGI_CetLCDDes1024x768Data */
+  {Panel1280x1024,0x0019,0x0001,3}, /* XGI_ExtLCDDes1280x1024Data */
+  {Panel1280x1024,0x0019,0x0000,4}, /* XGI_StLCDDes1280x1024Data */
+  {Panel1280x1024,0x0018,0x0010,5}, /* XGI_CetLCDDes1280x1024Data */
+  {Panel1400x1050,0x0019,0x0001,6}, /* XGI_ExtLCDDes1400x1050Data */
+  {Panel1400x1050,0x0019,0x0000,7}, /* XGI_StLCDDes1400x1050Data */
+  {Panel1400x1050,0x0418,0x0010,8}, /* XGI_CetLCDDes1400x1050Data */
+  {Panel1400x1050,0x0418,0x0410,9}, /* XGI_CetLCDDes1400x1050Data2 */
+  {Panel1600x1200,0x0019,0x0001,10}, /* XGI_ExtLCDDes1600x1200Data */
+  {Panel1600x1200,0x0019,0x0000,11}, /* XGI_StLCDDes1600x1200Data */
+  {PanelRef60Hz,0x0008,0x0008,12}, 	/* XGI_NoScalingDesData */
+  {Panel1024x768x75,0x0019,0x0001,13}, 	/* XGI_ExtLCDDes1024x768x75Data */
+  {Panel1024x768x75,0x0019,0x0000,14},	/* XGI_StLCDDes1024x768x75Data */
+  {Panel1024x768x75,0x0018,0x0010,15},  /* XGI_CetLCDDes1024x768x75Data */
+  {Panel1280x1024x75,0x0019,0x0001,16},	/* XGI_ExtLCDDes1280x1024x75Data */
+  {Panel1280x1024x75,0x0019,0x0000,17}, /* XGI_StLCDDes1280x1024x75Data */
+  {Panel1280x1024x75,0x0018,0x0010,18},	/* XGI_CetLCDDes1280x1024x75Data */
+  {PanelRef75Hz,0x0008,0x0008,19},	/* XGI_NoScalingDesDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_H */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_H */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_H */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_H */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_H */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_H */
+  {Panel1600x1200,0x0018,0x0000,6},  /* XGI_LVDSCRT11600x1200_1_H */
+  {Panel1024x768x75,0x0018,0x0000,7},	/* XGI_LVDSCRT11024x768_1_Hx75 */
+  {Panel1024x768x75,0x0018,0x0010,8},	/* XGI_LVDSCRT11024x768_2_Hx75 */
+  {Panel1280x1024x75,0x0018,0x0000,9},	/* XGI_LVDSCRT11280x1024_1_Hx75 */
+  {Panel1280x1024x75,0x0018,0x0010,10},	/* XGI_LVDSCRT11280x1024_2_Hx75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_V */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_V */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDSCRT11280x1024_1_V */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDSCRT11280x1024_2_V */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDSCRT11400x1050_1_V */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDSCRT11400x1050_2_V */
+  {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDSCRT11600x1200_1_V */
+  {Panel1024x768x75,0x0018,0x0000,7},	/* XGI_LVDSCRT11024x768_1_Vx75 */
+  {Panel1024x768x75,0x0018,0x0010,8},	/* XGI_LVDSCRT11024x768_2_Vx75 */
+  {Panel1280x1024x75,0x0018,0x0000,9},	/* XGI_LVDSCRT11280x1024_1_Vx75 */
+  {Panel1280x1024x75,0x0018,0x0010,10},	/* XGI_LVDSCRT11280x1024_2_Vx75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Data_1 */
+  {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDS1024x768Data_2 */
+  {Panel1280x1024,0x0018,0x0000,2}, /* XGI_LVDS1280x1024Data_1 */
+  {Panel1280x1024,0x0018,0x0010,3}, /* XGI_LVDS1280x1024Data_2 */
+  {Panel1400x1050,0x0018,0x0000,4}, /* XGI_LVDS1400x1050Data_1 */
+  {Panel1400x1050,0x0018,0x0010,5}, /* XGI_LVDS1400x1050Data_2 */
+  {Panel1600x1200,0x0018,0x0000,6}, /* XGI_LVDS1600x1200Data_1 */
+  {PanelRef60Hz,0x0008,0x0008,7}, /* XGI_LVDSNoScalingData */
+  {Panel1024x768x75,0x0018,0x0000,8},	/* XGI_LVDS1024x768Data_1x75 */
+  {Panel1024x768x75,0x0018,0x0010,9},	/* XGI_LVDS1024x768Data_2x75 */
+  {Panel1280x1024x75,0x0018,0x0000,10},	/* XGI_LVDS1280x1024Data_1x75 */
+  {Panel1280x1024x75,0x0018,0x0010,11}, /* XGI_LVDS1280x1024Data_2x75 */
+  {PanelRef75Hz,0x0008,0x0008,12},	/* XGI_LVDSNoScalingDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[]=
+{
+  {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Des_1 */
+  {Panel1024x768,0x0618,0x0410,1}, /* XGI_LVDS1024x768Des_3 */
+  {Panel1024x768,0x0018,0x0010,2}, /* XGI_LVDS1024x768Des_2 */
+  {Panel1280x1024,0x0018,0x0000,3}, /* XGI_LVDS1280x1024Des_1 */
+  {Panel1280x1024,0x0018,0x0010,4}, /* XGI_LVDS1280x1024Des_2 */
+  {Panel1400x1050,0x0018,0x0000,5}, /* XGI_LVDS1400x1050Des_1 */
+  {Panel1400x1050,0x0018,0x0010,6}, /* XGI_LVDS1400x1050Des_2 */
+  {Panel1600x1200,0x0018,0x0000,7}, /* XGI_LVDS1600x1200Des_1 */
+  {PanelRef60Hz,0x0008,0x0008,8}, 	/* XGI_LVDSNoScalingDesData */
+  {Panel1024x768x75,0x0018,0x0000,9},	/* XGI_LVDS1024x768Des_1x75 */
+  {Panel1024x768x75,0x0618,0x0410,10},	/* XGI_LVDS1024x768Des_3x75 */
+  {Panel1024x768x75,0x0018,0x0010,11},	/* XGI_LVDS1024x768Des_2x75 */
+  {Panel1280x1024x75,0x0018,0x0000,12},	/* XGI_LVDS1280x1024Des_1x75 */
+  {Panel1280x1024x75,0x0018,0x0010,13},	/* XGI_LVDS1280x1024Des_2x75 */
+  {PanelRef75Hz,0x0008,0x0008,14},	/* XGI_LVDSNoScalingDesDatax75 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_LCDDataTablStruct XGI_EPLCHLCDRegPtr[]=
+{
+  {Panel1024x768,0x0000,0x0000,0}, /* XGI_CH7017LV1024x768 */
+  {Panel1400x1050,0x0000,0x0000,1}, /* XGI_CH7017LV1400x1050 */
+  {0xFF,0x0000,0x0000,0}
+};
+
+XGI330_TVDataTablStruct XGI_TVDataTable[]=
+{
+ {0x09E1,0x0001,0},	/* XGI_ExtPALData */
+ {0x09E1,0x0000,1},	/* XGI_ExtNTSCData */
+ {0x09E1,0x0801,2},	/* XGI_StPALData */
+ {0x09E1,0x0800,3},	/* XGI_StNTSCData */
+ {0x49E0,0x0100,4},	/* XGI_ExtHiTVData */
+ {0x49E0,0x4100,5},	/* XGI_St2HiTVData */
+ {0x49E0,0x4900,13},	/* XGI_St1HiTVData */
+ {0x09E0,0x0020,6},	/* XGI_ExtYPbPr525iData */
+ {0x09E0,0x0040,7},	/* XGI_ExtYPbPr525pData */
+ {0x09E0,0x0080,8},	/* XGI_ExtYPbPr750pData */
+ {0x09E0,0x0820,9},	/* XGI_StYPbPr525iData */
+ {0x09E0,0x0840,10},	/* XGI_StYPbPr525pData */
+ {0x09E0,0x0880,11}, 	/* XGI_StYPbPr750pData */
+ {0xffff,0x0000,12}  	/* END */
+};
+
+USHORT TVLenList[]=
+{
+   LVDSCRT1Len_H,
+   LVDSCRT1Len_V,
+   LVDSDataLen,
+   0,
+   TVDataLen,
+   0,
+   0,
+   CHTVRegLen
+} ;
+
+/* Chrontel 7017 TV CRT1 Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVCRT1UNTSC */
+  {0x0011,0x0010,1}, /* XGI_CHTVCRT1ONTSC */
+  {0x0011,0x0001,2}, /* XGI_CHTVCRT1UPAL */
+  {0x0011,0x0011,3}, /* XGI_CHTVCRT1OPAL */
+  {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Timing List */
+XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVUNTSCData */
+  {0x0011,0x0010,1}, /* XGI_CHTVONTSCData */
+  {0x0011,0x0001,2}, /* XGI_CHTVUPALData */
+  {0x0011,0x0011,3}, /* XGI_CHTVOPALData */
+  {0xFFFF,0x0000,4}
+};
+
+/* ;;Chrontel 7017 TV Reg. List */
+XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[]=
+{
+  {0x0011,0x0000,0}, /* XGI_CHTVRegUNTSC */
+  {0x0011,0x0010,1}, /* XGI_CHTVRegONTSC */
+  {0x0011,0x0001,2}, /* XGI_CHTVRegUPAL */
+  {0x0011,0x0011,3}, /* XGI_CHTVRegOPAL */
+  {0xFFFF,0x0000,4}
+};
+
+USHORT LCDLenList[]=
+{
+   LVDSCRT1Len_H,
+   LVDSCRT1Len_V,
+   LVDSDataLen,
+   LCDDesDataLen,
+   LCDDataLen,
+   LCDDesDataLen,
+   0,
+   LCDDesDataLen,
+   LCDDesDataLen,
+   0
+} ;
+
+XGI330_LCDCapStruct  XGI660_LCDDLCapList[]=  /* 660, Dual link */
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+		 0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+                {Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+                {Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+                {Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+		 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+                {Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+                {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI_LCDDLCapList[]=  /* Dual link only */
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+		{Panel1280x1024, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+		{Panel1400x1050, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+		{Panel1600x1200, LCDDualLink+DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+		 0x43, 0x22, 0x70, 0x24, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+		{Panel1280x1024x75, LCDDualLink+DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+		{0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI660_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+                {Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+                {Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+                {Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x053, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+                {Panel1600x1200, DefaultLCDCap, LCDToFull, 0x053, 0xC0, 0x03, VCLK162,
+		 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x014, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+                {Panel1280x1024x75,+DefaultLCDCap, StLCDBToA, 0x053, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+                {0xFF, DefaultLCDCap, 0, 0x053, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI330_LCDCapStruct  XGI_LCDCapList[]=
+{
+/* LCDCap1024x768 */
+		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024 */
+		{Panel1280x1024, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1400x1050 */
+		{Panel1400x1050, DefaultLCDCap, StLCDBToA, 0x012, 0x70, 0x03, VCLK108_2,
+		 0x70, 0x44, 0xF8, 0x2F, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1600x1200 */
+		{Panel1600x1200, DefaultLCDCap, LCDToFull, 0x012, 0xC0, 0x03, VCLK162,
+		 0x5A, 0x23, 0x5A, 0x23, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCap1024x768x75 */
+		{Panel1024x768x75, DefaultLCDCap, 0, 0x012, 0x60, 0, VCLK78_75,
+		 0x2B, 0x61, 0x2B, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10},
+/* LCDCap1280x1024x75 */
+		{Panel1280x1024x75, DefaultLCDCap, StLCDBToA, 0x012, 0x90, 0x03, VCLK135_5,
+		 0x54, 0x42, 0x4A, 0x61, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		 0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x30, 0x10},
+/* LCDCapDefault */
+		{0xFF, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
+		0x6C, 0xC3, 0x35, 0x62, 0x02, 0x14, 0x0A, 0x02, 0x00,
+		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
+};
+
+XGI21_LVDSCapStruct XGI21_LCDCapList[]=
+{
+    {DisableLCD24bpp + LCDPolarity,
+     2160,1250,1600,1200,  64,  1,  192,   3,
+     0x70,0x24,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity,
+     1688,1066,1280,1024,  48,  1,  112,   3,
+     0x70,0x44,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+     1344, 806,1024, 768,  24,  3,  136,   6,
+     0x6C,0x65,0x20,0x04,0x0A,0x02,0xC8
+    },
+    {DisableLCD24bpp + LCDPolarity,
+     1056, 628, 800, 600,  40,   1, 128,   4,
+     0x42,0xE2,0x20,0x14,0x0A,0x02,0x00
+    },
+    {DisableLCD24bpp + LCDPolarity,
+      928, 525, 800, 480,  40,  13,  48,   3,
+     0x52,0xC5,0x20,0x14,0x0A,0x02,0x00
+    },
+    {DisableLCD24bpp + LCDPolarity + (LCDPolarity << 8),
+      800, 525, 640, 480,  16,  10,  96,   2,
+     0x1B,0xE1,0x20,0x04,0x0A,0x02,0xC8
+    }
+
+};
+
+XGI_Ext2Struct XGI330_RefIndex[]=
+{
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x59, 320, 200},/* 00 */
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x00, 320, 400},/* 01 */
+{Support32Bpp + SupportAllCRT2 + SyncNN,			RES320x240,	 VCLK25_175, 0x04,0x20,0x50, 320, 240},/* 02 */
+{Support32Bpp + SupportAllCRT2 + SyncPP,			RES400x300,	 VCLK40,     0x05,0x32,0x51, 400, 300},/* 03 */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024,		RES512x384,	 VCLK65,     0x06,0x43,0x52, 512, 384},/* 04 */
+{Support32Bpp + SupportAllCRT2 + SyncPN,			RES640x400,	 VCLK25_175, 0x00,0x14,0x2f, 640, 400},/* 05 */
+{Support32Bpp + SupportAllCRT2 + SyncNN,			RES640x480x60,	 VCLK25_175, 0x04,0x24,0x2e, 640, 480},/* 06 640x480x60Hz (LCD 640x480x60z) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES640x480x72,	 VCLK31_5,   0x04,0x24,0x2e, 640, 480},/* 07 640x480x72Hz (LCD 640x480x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES640x480x75,	 VCLK31_5,   0x47,0x24,0x2e, 640, 480},/* 08 640x480x75Hz (LCD 640x480x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncNN,			RES640x480x85,	 VCLK36,     0x8A,0x24,0x2e, 640, 480},/* 09 640x480x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x100,	 VCLK43_163, 0x00,0x24,0x2e, 640, 480},/* 0a 640x480x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x120,	 VCLK52_406, 0x00,0x24,0x2e, 640, 480},/* 0b 640x480x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES640x480x160,	 VCLK72_852, 0x00,0x24,0x2e, 640, 480},/* 0c 640x480x160Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncNN,			RES640x480x200,	 VCLK86_6,   0x00,0x24,0x2e, 640, 480},/* 0d 640x480x200Hz */
+{Support32Bpp + NoSupportLCD + SyncPP,				RES800x600x56,	 VCLK36,     0x05,0x36,0x6a, 800, 600},/* 0e 800x600x56Hz */
+{Support32Bpp + NoSupportTV + SyncPP,				RES800x600x60,	 VCLK40,     0x05,0x36,0x6a, 800, 600},/* 0f 800x600x60Hz (LCD 800x600x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES800x600x72,	 VCLK50,     0x48,0x36,0x6a, 800, 600},/* 10 800x600x72Hz (LCD 800x600x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES800x600x75,	 VCLK49_5,   0x8B,0x36,0x6a, 800, 600},/* 11 800x600x75Hz (LCD 800x600x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x600x85,	 VCLK56_25,  0x00,0x36,0x6a, 800, 600},/* 12 800x600x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x100,	 VCLK68_179, 0x00,0x36,0x6a, 800, 600},/* 13 800x600x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x120,	 VCLK83_95,  0x00,0x36,0x6a, 800, 600},/* 14 800x600x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES800x600x160,	 VCLK116_406,0x00,0x36,0x6a, 800, 600},/* 15 800x600x160Hz */
+{Support32Bpp + InterlaceMode + SyncPP,				RES1024x768x43,	 VCLK44_9,   0x00,0x47,0x37,1024, 768},/* 16 1024x768x43Hz */
+{Support32Bpp + NoSupportTV + SyncNN + SupportTV1024,		RES1024x768x60,	 VCLK65,     0x06,0x47,0x37,1024, 768},/* 17 1024x768x60Hz (LCD 1024x768x60Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncNN,			RES1024x768x70,	 VCLK75,     0x49,0x47,0x37,1024, 768},/* 18 1024x768x70Hz (LCD 1024x768x70Hz) */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1024x768x75,	 VCLK78_75,  0x00,0x47,0x37,1024, 768},/* 19 1024x768x75Hz (LCD 1024x768x75Hz) */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x768x85,	 VCLK94_5,   0x8C,0x47,0x37,1024, 768},/* 1a 1024x768x85Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x100, VCLK113_309,0x00,0x47,0x37,1024, 768},/* 1b 1024x768x100Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x120, VCLK139_054,0x00,0x47,0x37,1024, 768},/* 1c 1024x768x120Hz */
+{Support32Bpp + SupportLCD + SyncPP,				RES1280x960x60,	 VCLK108_2,  0x08,0x58,0x7b,1280, 960},/* 1d 1280x960x60Hz */
+{Support32Bpp + InterlaceMode + SyncPP,				RES1280x1024x43, VCLK78_75,  0x00,0x58,0x3a,1280,1024},/* 1e 1280x1024x43Hz */
+{Support32Bpp + NoSupportTV + SyncPP,				RES1280x1024x60, VCLK108_2,  0x07,0x58,0x3a,1280,1024},/* 1f 1280x1024x60Hz (LCD 1280x1024x60Hz) */
+{Support32Bpp + NoSupportTV + SyncPP,				RES1280x1024x75, VCLK135_5,  0x00,0x58,0x3a,1280,1024},/* 20 1280x1024x75Hz (LCD 1280x1024x75Hz) */
+{Support32Bpp + SyncPP,						RES1280x1024x85, VCLK157_5,  0x00,0x58,0x3a,1280,1024},/* 21 1280x1024x85Hz */
+{Support32Bpp + SupportLCD + SyncPP + SupportCRT2in301C,	RES1600x1200x60, VCLK162,    0x09,0x7A,0x3c,1600,1200},/* 22 1600x1200x60Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x65, VCLK175,    0x00,0x69,0x3c,1600,1200},/* 23 1600x1200x65Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x70, VCLK189,    0x00,0x69,0x3c,1600,1200},/* 24 1600x1200x70Hz */
+{Support32Bpp + SyncPP + SupportCRT2in301C,			RES1600x1200x75, VCLK202_5,  0x00,0x69,0x3c,1600,1200},/* 25 1600x1200x75Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x85, VCLK229_5,  0x00,0x69,0x3c,1600,1200},/* 26 1600x1200x85Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x100,VCLK269_655,0x00,0x69,0x3c,1600,1200},/* 27 1600x1200x100Hz */
+{Support32Bpp + SyncPP,						RES1600x1200x120,VCLK323_586,0x00,0x69,0x3c,1600,1200},/* 28 1600x1200x120Hz */
+{Support32Bpp + SupportLCD + SyncNP,				RES1920x1440x60, VCLK234,    0x00,0x00,0x68,1920,1440},/* 29 1920x1440x60Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x65, VCLK254_817,0x00,0x00,0x68,1920,1440},/* 2a 1920x1440x65Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x70, VCLK277_015,0x00,0x00,0x68,1920,1440},/* 2b 1920x1440x70Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x75, VCLK291_132,0x00,0x00,0x68,1920,1440},/* 2c 1920x1440x75Hz */
+{Support32Bpp + SyncPN,						RES1920x1440x85, VCLK330_615,0x00,0x00,0x68,1920,1440},/* 2d 1920x1440x85Hz */
+{Support16Bpp + SyncPN,						RES1920x1440x100,VCLK388_631,0x00,0x00,0x68,1920,1440},/* 2e 1920x1440x100Hz */
+{Support32Bpp + SupportLCD + SyncPN,				RES2048x1536x60, VCLK266_952,0x00,0x00,0x6c,2048,1536},/* 2f 2048x1536x60Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x65, VCLK291_766,0x00,0x00,0x6c,2048,1536},/* 30 2048x1536x65Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x70, VCLK315_195,0x00,0x00,0x6c,2048,1536},/* 31 2048x1536x70Hz */
+{Support32Bpp + SyncPN,						RES2048x1536x75, VCLK340_477,0x00,0x00,0x6c,2048,1536},/* 32 2048x1536x75Hz */
+{Support16Bpp + SyncPN,						RES2048x1536x85, VCLK375_847,0x00,0x00,0x6c,2048,1536},/* 33 2048x1536x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES800x480x60,	 VCLK39_77,  0x08,0x00,0x70, 800, 480},/* 34 800x480x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x480x75,	 VCLK49_5,   0x08,0x00,0x70, 800, 480},/* 35 800x480x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES800x480x85,	 VCLK56_25,  0x08,0x00,0x70, 800, 480},/* 36 800x480x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES1024x576x60,	 VCLK65,     0x09,0x00,0x71,1024, 576},/* 37 1024x576x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x576x75,	 VCLK78_75,  0x09,0x00,0x71,1024, 576},/* 38 1024x576x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1024x576x85,	 VCLK94_5,   0x09,0x00,0x71,1024, 576},/* 39 1024x576x85Hz */
+{Support32Bpp + SupportHiVisionTV + SupportRAMDAC2 + SyncPP + SupportYPbPr,	RES1280x720x60,	 VCLK108_2,  0x0A,0x00,0x75,1280, 720},/* 3a 1280x720x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1280x720x75,	 VCLK135_5,  0x0A,0x00,0x75,1280, 720},/* 3b 1280x720x75Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1280x720x85,	 VCLK157_5,  0x0A,0x00,0x75,1280, 720},/* 3c 1280x720x85Hz */
+{Support32Bpp + SupportTV + SyncNN,				RES720x480x60,	 VCLK28_322, 0x06,0x00,0x31, 720, 480},/* 3d 720x480x60Hz */
+{Support32Bpp + SupportTV + SyncPP,				RES720x576x56,	 VCLK36,     0x06,0x00,0x32, 720, 576},/* 3e 720x576x56Hz */
+{Support32Bpp + InterlaceMode + NoSupportLCD + SyncPP,		RES856x480x79I,	 VCLK35_2,   0x00,0x00,0x00, 856, 480},/* 3f 856x480x79I */
+{Support32Bpp + NoSupportLCD + SyncNN,				RES856x480x60,	 VCLK35_2,   0x00,0x00,0x00, 856, 480},/* 40 856x480x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1280x768x60,	 VCLK79_411, 0x08,0x48,0x23,1280, 768},/* 41 1280x768x60Hz */
+{Support32Bpp + NoSupportHiVisionTV + SyncPP,			RES1400x1050x60, VCLK122_61, 0x08,0x69,0x26,1400,1050},/* 42 1400x1050x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1152x864x60,	 VCLK80_350, 0x37,0x00,0x20,1152, 864},/* 43 1152x864x60Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPP,			RES1152x864x75,	 VCLK107_385,0x37,0x00,0x20,1152, 864},/* 44 1152x864x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x75,	 VCLK125_999,0x3A,0x88,0x7b,1280, 960},/* 45 1280x960x75Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x85,	 VCLK148_5,  0x0A,0x88,0x7b,1280, 960},/* 46 1280x960x85Hz */
+{Support32Bpp + SupportLCD + SupportRAMDAC2 + SyncPP,		RES1280x960x120, VCLK217_325,0x3A,0x88,0x7b,1280, 960},/* 47 1280x960x120Hz */
+{Support32Bpp + SupportRAMDAC2 + SyncPN,			RES1024x768x160, VCLK139_054,0x30,0x47,0x37,1024, 768},/* 48 1024x768x160Hz */
+};
+
+
+
+XGI330_VCLKDataStruct XGI330_VCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0xe2, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0xe2, 49}, /* 0x7 */
+ { 0x53,0xe2, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x6c,0xc3, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6e,0x46, 76}, /* 0x10 */
+ { 0x2b,0x61, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x41,104}, /* 0x17 */
+ { 0x3a,0x23,105}, /* 0x18 */
+ { 0x70,0x44,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0x54,0x42,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x62,0x06,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x60,0x36, 30}, /* 0x41 */
+ { 0x40,0x4A, 28}, /* 0x42 */
+ { 0x9F,0x46, 44}, /* 0x43 */
+ { 0x97,0x2C, 26}, /* 0x44 */
+ { 0x44,0xE4, 25}, /* 0x45 */
+ { 0x7E,0x32, 47}, /* 0x46 */
+ { 0x08,0x24, 31}, /* 0x47 */
+ { 0x97,0x2c, 26}, /* 0x48 */
+ { 0xCE,0x3c, 39}, /* 0x49 */
+ { 0x52,0x4A, 36}, /* 0x4a */
+ { 0x2C,0x61, 95}, /* 0x4b */
+ { 0x78,0x27,108}, /* 0x4c */
+ { 0x66,0x43,123},  /* 0x4d */
+ { 0x2c,0x61, 80},  /* 0x4e */
+ { 0x3b,0x61,108}  /* 0x4f */
+};
+
+XGI_VBVCLKDataStruct XGI330_VBVCLKData[]=
+{
+ { 0x1b,0xe1, 25}, /* 0x0 */
+ { 0x4e,0xe4, 28}, /* 0x1 */
+ { 0x57,0xe4, 31}, /* 0x2 */
+ { 0xc3,0xc8, 36}, /* 0x3 */
+ { 0x42,0x47, 40}, /* 0x4 */
+ { 0xfe,0xcd, 43}, /* 0x5 */
+ { 0x5d,0xc4, 44}, /* 0x6 */
+ { 0x52,0x47, 49}, /* 0x7 */
+ { 0x53,0x47, 50}, /* 0x8 */
+ { 0x74,0x67, 52}, /* 0x9 */
+ { 0x6d,0x66, 56}, /* 0xa */
+ { 0x5a,0x64, 65}, /* 0xb */
+ { 0x46,0x44, 67}, /* 0xc */
+ { 0xb1,0x46, 68}, /* 0xd */
+ { 0xd3,0x4a, 72}, /* 0xe */
+ { 0x29,0x61, 75}, /* 0xf */
+ { 0x6d,0x46, 75}, /* 0x10 */
+ { 0x41,0x43, 78}, /* 0x11 */
+ { 0x31,0x42, 79}, /* 0x12 */
+ { 0xab,0x44, 83}, /* 0x13 */
+ { 0x46,0x25, 84}, /* 0x14 */
+ { 0x78,0x29, 86}, /* 0x15 */
+ { 0x62,0x44, 94}, /* 0x16 */
+ { 0x2b,0x22,104}, /* 0x17 */
+ { 0x49,0x24,105}, /* 0x18 */
+ { 0xf8,0x2f,108}, /* 0x19 */
+ { 0x3c,0x23,109}, /* 0x1a */
+ { 0x5e,0x43,113}, /* 0x1b */
+ { 0xbc,0x44,116}, /* 0x1c */
+ { 0xe0,0x46,132}, /* 0x1d */
+ { 0xd4,0x28,135}, /* 0x1e */
+ { 0xea,0x2a,139}, /* 0x1f */
+ { 0x41,0x22,157}, /* 0x20 */
+ { 0x70,0x24,162}, /* 0x21 */
+ { 0x30,0x21,175}, /* 0x22 */
+ { 0x4e,0x22,189}, /* 0x23 */
+ { 0xde,0x26,194}, /* 0x24 */
+ { 0x70,0x07,202}, /* 0x25 */
+ { 0x3f,0x03,229}, /* 0x26 */
+ { 0xb8,0x06,234}, /* 0x27 */
+ { 0x34,0x02,253}, /* 0x28 */
+ { 0x58,0x04,255}, /* 0x29 */
+ { 0x24,0x01,265}, /* 0x2a */
+ { 0x9b,0x02,267}, /* 0x2b */
+ { 0x70,0x05,270}, /* 0x2c */
+ { 0x25,0x01,272}, /* 0x2d */
+ { 0x9c,0x02,277}, /* 0x2e */
+ { 0x27,0x01,286}, /* 0x2f */
+ { 0x3c,0x02,291}, /* 0x30 */
+ { 0xef,0x0a,292}, /* 0x31 */
+ { 0xf6,0x0a,310}, /* 0x32 */
+ { 0x95,0x01,315}, /* 0x33 */
+ { 0xf0,0x09,324}, /* 0x34 */
+ { 0xfe,0x0a,331}, /* 0x35 */
+ { 0xf3,0x09,332}, /* 0x36 */
+ { 0xea,0x08,340}, /* 0x37 */
+ { 0xe8,0x07,376}, /* 0x38 */
+ { 0xde,0x06,389}, /* 0x39 */
+ { 0x52,0x2a, 54}, /* 0x3a */
+ { 0x52,0x6a, 27}, /* 0x3b */
+ { 0x62,0x24, 70}, /* 0x3c */
+ { 0x62,0x64, 70}, /* 0x3d */
+ { 0xa8,0x4c, 30}, /* 0x3e */
+ { 0x20,0x26, 33}, /* 0x3f */
+ { 0x31,0xc2, 39}, /* 0x40 */
+ { 0x2e,0x48, 25}, /* 0x41 */
+ { 0x24,0x46, 25}, /* 0x42 */
+ { 0x26,0x64, 28}, /* 0x43 */
+ { 0x37,0x64, 40}, /* 0x44 */
+ { 0xa1,0x42,108}, /* 0x45 */
+ { 0x37,0x61,100}, /* 0x46 */
+ { 0x78,0x27,108}, /* 0x47 */
+ { 0x5e,0x64,68},  /* 0x48 chiawen for fuj1280x768*/
+ { 0x70,0x44,108}, /* 0x49 chiawen for 1400x1050*/
+};
+
+UCHAR XGI330_ScreenOffset[]={ 0x14,0x19,0x20,0x28,0x32,0x40,0x50,0x64,0x78,0x80,0x2d,0x35,0x57,0x48 };
+
+XGI_StResInfoStruct XGI330_StResInfo[]=
+{
+ { 640,400},
+ { 640,350},
+ { 720,400},
+ { 720,350},
+ { 640,480}
+};
+
+XGI_ModeResInfoStruct XGI330_ModeResInfo[]=
+{
+ {  320, 200, 8, 8},
+ {  320, 240, 8, 8},
+ {  320, 400, 8, 8},
+ {  400, 300, 8, 8},
+ {  512, 384, 8, 8},
+ {  640, 400, 8,16},
+ {  640, 480, 8,16},
+ {  800, 600, 8,16},
+ { 1024, 768, 8,16},
+ { 1280,1024, 8,16},
+ { 1600,1200, 8,16},
+ { 1920,1440, 8,16},
+ { 2048,1536, 8,16},
+ {  720, 480, 8,16},
+ {  720, 576, 8,16},
+ { 1280, 960, 8,16},
+ {  800, 480, 8,16},
+ { 1024, 576, 8,16},
+ { 1280, 720, 8,16},
+ {  856, 480, 8,16},
+ { 1280, 768, 8,16},
+ { 1400,1050, 8,16},
+ { 1152, 864, 8,16}
+};
+
+UCHAR XGI330_OutputSelect =0x40;
+UCHAR XGI330_SoftSetting = 0x30;
+UCHAR XGI330_SR07=0x18;
+UCHAR XGI330New_SR15[8][8]={
+{0x0,0x4,0x60,0x60},
+{0xf,0xf,0xf,0xf},
+{0xba,0xba,0xba,0xba},
+{0xa9,0xa9,0xac,0xac},
+{0xa0,0xa0,0xa0,0xa8},
+{0x0,0x0,0x2,0x2},
+{0x30,0x30,0x40,0x40},
+{0x0,0xa5,0xfb,0xf6}
+};
+
+UCHAR XGI330New_CR40[5][8]={
+{0x77,0x77,0x44,0x44},
+{0x77,0x77,0x44,0x44},
+{0x0,0x0,0x0,0x0},
+{0x5b,0x5b,0xab,0xab},
+{0x0,0x0,0xf0,0xf8}
+};
+
+UCHAR XGI330_CR49[]={0xaa,0x88};
+UCHAR XGI330_SR1F=0x0;
+UCHAR XGI330_SR21=0xa3;
+UCHAR XGI330_650_SR21=0xa7;
+UCHAR XGI330_SR22=0xfb;
+UCHAR XGI330_SR23=0xf6;
+UCHAR XGI330_SR24=0xd;
+
+UCHAR XGI660_SR21=0xa3;/* 2003.0312 */
+UCHAR XGI660_SR22=0xf3;/* 2003.0312 */
+
+UCHAR XGI330_LVDS_SR32=0x00;   /* ynlai for 650 LVDS */
+UCHAR XGI330_LVDS_SR33=0x00;	/* chiawen for 650 LVDS */
+UCHAR XGI330_650_SR31=0x40;
+UCHAR XGI330_650_SR33=0x04;
+UCHAR XGI330_CRT2Data_1_2 = 0x0;
+UCHAR XGI330_CRT2Data_4_D = 0x0;
+UCHAR XGI330_CRT2Data_4_E = 0x0;
+UCHAR XGI330_CRT2Data_4_10 = 0x80;
+USHORT XGI330_RGBSenseData = 0xd1;
+USHORT XGI330_VideoSenseData = 0xb9;
+USHORT XGI330_YCSenseData = 0xb3;
+USHORT XGI330_RGBSenseData2 = 0x0190;     /*301b*/
+USHORT XGI330_VideoSenseData2 = 0x0110;
+USHORT XGI330_YCSenseData2 = 0x016B;
+UCHAR XGI330_NTSCPhase[] = {0x21,0xed,0x8a,0x8};
+UCHAR XGI330_PALPhase[] = {0x2a,0x5,0xd3,0x0};
+UCHAR XGI330_NTSCPhase2[] = {0x21,0xF0,0x7B,0xD6};/*301b*/
+UCHAR XGI330_PALPhase2[] = {0x2a,0x09,0x86,0xe9};
+UCHAR XGI330_PALMPhase[] = {0x21,0xE4,0x2E,0x9B};   /*palmn*/
+UCHAR XGI330_PALNPhase[] = {0x21,0xF4,0x3E,0xBA};
+UCHAR XG40_I2CDefinition = 0x00 ;
+UCHAR XG20_CR97 = 0x10 ;
+
+UCHAR XG21_DVOSetting = 0x00 ;
+UCHAR XG21_CR2E = 0x00 ;
+UCHAR XG21_CR2F = 0x00 ;
+UCHAR XG21_CR46 = 0x00 ;
+UCHAR XG21_CR47 = 0x00 ;
+
+UCHAR XG27_CR97 = 0xC1 ;
+UCHAR XG27_SR36 = 0x30 ;
+UCHAR XG27_CR8F = 0x0C ;
+UCHAR XG27_CRD0[] = {0,0,0,0,0,0,0,0x82,0x00,0x66,0x01,0x00} ;
+UCHAR XG27_CRDE[] = {0,0} ;
+UCHAR XG27_SR40 = 0x04 ;
+UCHAR XG27_SR41 = 0x00 ;
+
+UCHAR XGI330_CHTVVCLKUNTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKONTSC[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKUPAL[]={0x00 };
+
+UCHAR XGI330_CHTVVCLKOPAL[]={0x00 };
+
+UCHAR XGI7007_CHTVVCLKUNTSC[]={CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK30_2,
+                               CH7007TVVCLK28_1,
+                               CH7007TVVCLK47_8
+                              };
+
+UCHAR XGI7007_CHTVVCLKONTSC[]={CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK26_4,
+                               CH7007TVVCLK24_6,
+                               CH7007TVVCLK43_6
+                              };
+
+UCHAR XGI7007_CHTVVCLKUPAL[]={CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK26_2,
+                              CH7007TVVCLK39
+                             };
+
+UCHAR XGI7007_CHTVVCLKOPAL[]={CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK31_5,
+                              CH7007TVVCLK26_2,
+                              CH7007TVVCLK36
+                             };
+
+XGI330_VCLKDataStruct XGI_CH7007VCLKData[]=
+{
+ { 0x60,0x36,30},  /* 0 30.2 MHZ */
+ { 0x40,0x4A,28},  /* 1 28.19 MHZ */
+ { 0x9F,0x46,44},  /* 2 43.6 MHZ */
+ { 0x97,0x2C,26},  /* 3 26.4 MHZ */
+ { 0x44,0xE4,25},  /* 4 24.6 MHZ */
+ { 0x7E,0x32,47},  /* 5 47.832 MHZ */
+ { 0x8A,0x24,31},  /* 6 31.5 MHZ */
+ { 0x97,0x2C,26},  /* 7 26.2 MHZ */
+ { 0xCE,0x3C,39},  /* 8 39 MHZ   */
+ { 0x52,0x4A,36},  /* 9 36 MHZ   */
+ { 0xFF,0x00,0 }   /* End mark      */
+};
+
+XGI330_VCLKDataStruct XGI_VCLKData[]=
+{
+               	/* SR2B,SR2C,SR2D */
+ 		{      0x1B,0xE1,25               },/* 00 (25.175MHz) */
+
+		{      0x4E,0xE4,28               },/* 01 (28.322MHz) */
+
+                {      0x57,0xE4,31               },/* 02 (31.500MHz) */
+
+                {      0xC3,0xC8,36               },/* 03 (36.000MHz) */
+
+                {      0x42,0xE2,40               },/* 04 (40.000MHz) */
+
+                {      0xFE,0xCD,43               },/* 05 (43.163MHz) */
+
+                {      0x5D,0xC4,44               },/* 06 (44.900MHz) */
+
+                {      0x52,0xE2,49               },/* 07 (49.500MHz) */
+
+                {      0x53,0xE2,50               },/* 08 (50.000MHz) */
+
+                {      0x74,0x67,52               },/* 09 (52.406MHz) */
+
+                {      0x6D,0x66,56               },/* 0A (56.250MHz) */
+
+                {      0x6C,0xC3,65               },/* 0B (65.000MHz) */
+
+                {      0x46,0x44,67               },/* 0C (67.765MHz) */
+
+                {      0xB1,0x46,68               },/* 0D (68.179MHz) */
+
+                {      0xD3,0x4A,72               },/* 0E (72.852MHz) */
+
+                {      0x29,0x61,75              },/* 0F (75.000MHz) */
+
+                {      0x6E,0x46,76               },/* 10 (75.800MHz) */
+
+                {      0x2B,0x61,78               },/* 11 (78.750MHz) */
+
+                {      0x31,0x42,79               },/* 12 (79.411MHz) */
+
+                {      0xAB,0x44,83               },/* 13 (83.950MHz) */
+
+                {      0x46,0x25,84               },/* 14 (84.800MHz) */
+
+                {      0x78,0x29,86               },/* 15 (86.600MHz) */
+
+                {      0x62,0x44,94               },/* 16 (94.500MHz) */
+
+                {      0x2B,0x41,104               },/* 17 (104.998MHz) */
+
+                {      0x3A,0x23,105               },/* 18 (105.882MHz) */
+
+                {      0x70,0x44,108               },/* 19 (107.862MHz) */
+
+                {      0x3C,0x23,109               },/* 1A (109.175MHz) */
+
+                {      0x5E,0x43,113              },/* 1B (113.309MHz) */
+
+                {      0xBC,0x44,116              },/* 1C (116.406MHz) */
+
+                {      0xE0,0x46,132              },/* 1D (132.258MHz) */
+
+                {      0x54,0x42,135               },/* 1E (135.500MHz) */
+
+                {      0x9C,0x22,139               },/* 1F (139.275MHz) */
+
+                {      0x41,0x22,157               },/* 20 (157.500MHz) */
+
+                {      0x70,0x24,162               },/* 21 (161.793MHz) */
+
+                {      0x30,0x21,175               },/* 22 (175.000MHz) */
+
+                {      0x4E,0x22,189              },/* 23 (188.520MHz) */
+
+                {      0xDE,0x26,194              },/* 24 (194.400MHz) */
+
+                {      0x62,0x06,202               },/* 25 (202.500MHz) */
+
+                {      0x3F,0x03,229               },/* 26 (229.500MHz) */
+
+                {      0xB8,0x06,234               },/* 27 (233.178MHz) */
+
+                {      0x34,0x02,253               },/* 28 (252.699MHz) */
+
+                {      0x58,0x04,255               },/* 29 (254.817MHz) */
+
+                {      0x24,0x01,265              },/* 2A (265.728MHz) */
+
+                {      0x9B,0x02,267               },/* 2B (266.952MHz) */
+
+                {      0x70,0x05,270               },/* 2C (269.65567MHz) */
+
+                {      0x25,0x01,272               },/* 2D (272.04199MHz) */
+
+                {      0x9C,0x02,277               },/* 2E (277.015MHz) */
+
+                {      0x27,0x01,286               },/* 2F (286.359985MHz) */
+
+                {      0xB3,0x04,291               },/* 30 (291.13266MHz) */
+
+                {      0xBC,0x05,292               },/* 31 (291.766MHz) */
+
+                {      0xF6,0x0A,310               },/* 32 (309.789459MHz) */
+
+                {      0x95,0x01,315               },/* 33 (315.195MHz) */
+
+                {      0xF0,0x09,324               },/* 34 (323.586792MHz) */
+
+                {      0xFE,0x0A,331               },/* 35 (330.615631MHz) */
+
+                {      0xF3,0x09,332              },/* 36 (332.177612MHz) */
+
+                {      0x5E,0x03,340              },/* 37 (340.477MHz) */
+
+                {      0xE8,0x07,376              },/* 38 (375.847504MHz) */
+
+                {      0xDE, 0x06,389             },/* 39 (388.631439MHz) */
+
+                {      0x52,0x2A,54               },/* 3A (54.000MHz) */
+
+                {      0x52,0x6A,27              },/* 3B (27.000MHz) */
+
+                {      0x62,0x24,70               },/* 3C (70.874991MHz) */
+
+                {      0x62,0x64,70               },/* 3D (70.1048912MHz) */
+
+                {      0xA8,0x4C,30               },/* 3E (30.1048912MHz) */
+
+                {      0x20,0x26,33               },/* 3F (33.7499957MHz) */
+
+                {      0x31,0xc2,39               },/* 40 (39.77MHz) */
+
+                {      0x11,0x21,30               },/* 41 (30MHz) }// NTSC 1024X768 */
+
+                {      0x2E,0x48,25               },/* 42 (25.175MHz) }// ScaleLCD */
+
+                {      0x24,0x46,25               },/* 43 (25.175MHz) */
+
+                {      0x26,0x64,28               },/* 44 (28.322MHz) */
+
+                {      0x37,0x64,40               },/* 45 (40.000MHz) */
+
+                {      0xA1,0x42,108               },/* 46 (95.000MHz) }// QVGA */
+
+                {      0x37,0x61,100               },/* 47 (100.00MHz) */
+
+                {      0x78,0x27,108               },/* 48 (108.200MHz) */
+
+                {      0xBF,0xC8,35               },/* 49 (35.2MHz) */
+
+                {      0x66,0x43,123               },/* 4A (122.61Mhz) */
+
+                {      0x2C,0x61,80               },/* 4B (80.350Mhz) */
+
+                {      0x3B,0x61,108               },/* 4C (107.385Mhz) */
+
+
+/*                {      0x60,0x36,30               },// 4D (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4E (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4F (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 50 (30.200MHz)   }// CHTV
+
+                {      0x40,0x4A,28               },// 51 (28.190MHz)
+
+                {      0x9F,0x46,44               },// 52 (43.600MHz)
+
+                {      0x97,0x2C,26               },// 53 (26.400MHz)
+
+                {      0x44,0xE4,25               },// 54 (24.600MHz)
+
+                {      0x7E,0x32,47               },// 55 (47.832MHz)
+
+                {      0x8A,0x24,31               },// 56 (31.500MHz)
+
+                {      0x97,0x2C,26               },// 57 (26.200MHz)
+
+                {      0xCE,0x3C,39               },// 58 (39.000MHz)
+
+                {      0x52,0x4A,36               },// 59 (36.000MHz)
+
+*/
+		{      0x69,0x61,191		  }, /* 4D (190.96MHz ) */
+		{      0x4F,0x22,192		  }, /* 4E (192.069MHz) */
+		{      0x28,0x26,322		  }, /* 4F (322.273MHz) */
+		{      0x5C,0x6B,27		  }, /* 50 (27.74HMz) */
+		{      0x57,0x24,126		  }, /* 51 (125.999MHz) */
+		{      0x5C,0x42,148		  }, /* 52 (148.5MHz) */
+		{      0x42,0x61,120		  }, /* 53 (120.839MHz) */
+		{      0x62,0x61,178		  }, /* 54 (178.992MHz) */
+		{      0x59,0x22,217		  }, /* 55 (217.325MHz) */
+		{      0x29,0x01,300		  }, /* 56 (299.505Mhz) */
+		{      0x52,0x63,74		  }, /* 57 (74.25MHz) */
+
+
+                {      0xFF,0x00,0                }/* End mark */
+ }  ;
+
+XGI330_VCLKDataStruct XGI_VBVCLKData[]=
+{
+                {      0x1B,0xE1,25               },/* 00 (25.175MHz) */
+
+                {      0x4E,0xE4,28               },/* 01 (28.322MHz) */
+
+                {      0x57,0xE4,31               },/* 02 (31.500MHz) */
+
+                {      0xC3,0xC8,36               },/* 03 (36.000MHz) */
+
+                {      0x42,0x47,40               },/* 04 (40.000MHz) */
+
+                {      0xFE,0xCD,43               },/* 05 (43.163MHz) */
+
+                {      0x5D,0xC4,44               },/* 06 (44.900MHz) */
+
+                {      0x52,0x47,49               },/* 07 (49.500MHz) */
+
+                {      0x53,0x47,50               },/* 08 (50.000MHz) */
+
+                {      0x74,0x67,52               },/* 09 (52.406MHz) */
+
+                {      0x6D,0x66,56               },/* 0A (56.250MHz) */
+
+                {      0x35,0x62,65               },/* 0B (65.000MHz) */
+
+                {      0x46,0x44,67               },/* 0C (67.765MHz) */
+
+                {      0xB1,0x46,68               },/* 0D (68.179MHz) */
+
+                {      0xD3,0x4A,72               },/* 0E (72.852MHz) */
+
+                {      0x29,0x61,75               },/* 0F (75.000MHz) */
+
+                {      0x6D,0x46,75               },/* 10 (75.800MHz) */
+
+                {      0x41,0x43,78               },/* 11 (78.750MHz) */
+
+                {      0x31,0x42,79               },/* 12 (79.411MHz) */
+
+                {      0xAB,0x44,83               },/* 13 (83.950MHz) */
+
+                {      0x46,0x25,84               },/* 14 (84.800MHz) */
+
+                {      0x78,0x29,86               },/* 15 (86.600MHz) */
+
+                {      0x62,0x44,94               },/* 16 (94.500MHz) */
+
+                {      0x2B,0x22,104               },/* 17 (104.998MHz) */
+
+                {      0x49,0x24,105               },/* 18 (105.882MHz) */
+
+                {      0xF8,0x2F,108               },/* 19 (108.279MHz) */
+
+                {      0x3C,0x23,109               },/* 1A (109.175MHz) */
+
+                {      0x5E,0x43,113               },/* 1B (113.309MHz) */
+
+                {      0xBC,0x44,116               },/* 1C (116.406MHz) */
+
+                {      0xE0,0x46,132               },/* 1D (132.258MHz) */
+
+                {      0xD4,0x28,135               },/* 1E (135.220MHz) */
+
+                {      0xEA,0x2A,139               },/* 1F (139.275MHz) */
+
+                {      0x41,0x22,157               },/* 20 (157.500MHz) */
+
+                {      0x70,0x24,162               },/* 21 (161.793MHz) */
+
+                {      0x30,0x21,175               },/* 22 (175.000MHz) */
+
+                {      0x4E,0x22,189               },/* 23 (188.520MHz) */
+
+                {      0xDE,0x26,194               },/* 24 (194.400MHz) */
+
+                {      0x70,0x07,202               },/* 25 (202.500MHz) */
+
+                {      0x3F,0x03,229               },/* 26 (229.500MHz) */
+
+                {      0xB8,0x06,234               },/* 27 (233.178MHz) */
+
+                {      0x34,0x02,253               },/* 28 (252.699997 MHz) */
+
+                {      0x58,0x04,255               },/* 29 (254.817MHz) */
+
+                {      0x24,0x01,265               },/* 2A (265.728MHz) */
+
+                {      0x9B,0x02,267               },/* 2B (266.952MHz) */
+
+                {      0x70,0x05,270               },/* 2C (269.65567 MHz) */
+
+                {      0x25,0x01,272               },/* 2D (272.041992 MHz) */
+
+                {      0x9C,0x02,277               },/* 2E (277.015MHz) */
+
+                {      0x27,0x01,286               },/* 2F (286.359985 MHz) */
+
+                {      0x3C,0x02,291               },/* 30 (291.132660 MHz) */
+
+                {      0xEF,0x0A,292               },/* 31 (291.766MHz) */
+
+                {      0xF6,0x0A,310               },/* 32 (309.789459 MHz) */
+
+                {      0x95,0x01,315               },/* 33 (315.195MHz) */
+
+                {      0xF0,0x09,324               },/* 34 (323.586792 MHz) */
+
+                {      0xFE,0x0A,331               },/* 35 (330.615631 MHz) */
+
+                {      0xF3,0x09,332               },/* 36 (332.177612 MHz) */
+
+                {      0xEA,0x08,340               },/* 37 (340.477MHz) */
+
+                {      0xE8,0x07,376               },/* 38 (375.847504 MHz) */
+
+                {      0xDE,0x06,389               },/* 39 (388.631439 MHz) */
+
+                {      0x52,0x2A,54                },/* 3A (54.000MHz) */
+
+                {      0x52,0x6A,27                },/* 3B (27.000MHz) */
+
+
+                {      0x62,0x24,70                },/* 3C (70.874991MHz) */
+
+
+                {      0x62,0x64,70                },/* 3D (70.1048912MHz) */
+
+                {      0xA8,0x4C,30                },/* 3E (30.1048912MHz) */
+
+                {      0x20,0x26,33                },/* 3F (33.7499957MHz) */
+
+                {      0x31,0xc2,39                },/* 40 (39.77MHz) */
+
+                {      0x11,0x21,30                },/* 41 (30MHz) }// NTSC 1024X768 */
+
+                {      0x2E,0x48,25                },/* 42 (25.175MHz) }// ScaleLCD */
+
+                {      0x24,0x46,25                },/* 43 (25.175MHz) */
+
+                {      0x26,0x64,28                },/* 44 (28.322MHz) */
+
+                {      0x37,0x64,40                },/* 45 (40.000MHz) */
+
+                {      0xA1,0x42,108               },/* 46 (95.000MHz) }// QVGA */
+
+                {      0x37,0x61,100               },/* 47 (100.00MHz) */
+
+                {      0x78,0x27,108               },/* 48 (108.200MHz) */
+
+                {      0xBF,0xC8,35                },/* 49 (35.2MHz) */
+
+                {      0x66,0x43,123               },/* 4A (122.61Mhz) */
+
+                {      0x2C,0x61,80                },/* 4B (80.350Mhz) */
+
+                {      0x3B,0x61,108               },/* 4C (107.385Mhz) */
+
+/*
+                {      0x60,0x36,30               },// 4D (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4E (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 4F (30.200MHz)   }// No use
+
+                {      0x60,0x36,30               },// 50 (30.200MHz)   }// CHTV
+
+                {      0x40,0x4A,28               },// 51 (28.190MHz)
+
+                {      0x9F,0x46,44               },// 52 (43.600MHz)
+
+                {      0x97,0x2C,26               },// 53 (26.400MHz)
+
+                {      0x44,0xE4,25               },// 54 (24.600MHz)
+
+                {      0x7E,0x32,47               },// 55 (47.832MHz)
+
+                {      0x8A,0x24,31               },// 56 (31.500MHz)
+
+                {      0x97,0x2C,26               },// 57 (26.200MHz)
+
+                {      0xCE,0x3C,39               },// 58 (39.000MHz)
+
+                {      0x52,0x4A,36               },// 59 (36.000MHz)
+*/
+		{      0x69,0x61,191		  }, /* 4D (190.96MHz ) */
+		{      0x4F,0x22,192		  }, /* 4E (192.069MHz) */
+		{      0x28,0x26,322		  }, /* 4F (322.273MHz) */
+		{      0x5C,0x6B,27		  }, /* 50 (27.74HMz) */
+		{      0x57,0x24,126		  }, /* 51 (125.999MHz) */
+		{      0x5C,0x42,148		  }, /* 52 (148.5MHz) */
+		{      0x42,0x61,120		  }, /* 53 (120.839MHz) */
+		{      0x62,0x61,178		  }, /* 54 (178.992MHz) */
+		{      0x59,0x22,217		  }, /* 55 (217.325MHz) */
+		{      0x29,0x01,300		  }, /* 56 (299.505Mhz) */
+		{      0x52,0x63,74		  }, /* 57 (74.25MHz) */
+
+
+                {      0xFF,0x00,0                }      /* End mark */
+};
+
+UCHAR XGI660_TVDelayList[]=
+{
+          0x44,            /* ; 0 ExtNTSCDelay */
+          0x44,            /* ; 1 StNTSCDelay */
+          0x44,            /* ; 2 ExtPALDelay */
+          0x44,            /* ; 3 StPALDelay */
+          0x44,            /* ; 4 ExtHiTVDelay(1080i) */
+          0x44,            /* ; 5 StHiTVDelay(1080i) */
+          0x44,            /* ; 6 ExtYPbPrDelay(525i) */
+          0x44,            /* ; 7 StYPbPrDealy(525i) */
+          0x44,            /* ; 8 ExtYPbPrDelay(525p) */
+          0x44,            /* ; 9 StYPbPrDealy(525p) */
+          0x44,            /* ; A ExtYPbPrDelay(750p) */
+          0x44             /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI660_TVDelayList2[]=
+{
+          0x44,           /* ; 0 ExtNTSCDelay */
+          0x44,           /* ; 1 StNTSCDelay */
+          0x44,           /* ; 2 ExtPALDelay */
+          0x44,           /* ; 3 StPALDelay */
+          0x44,           /* ; 4 ExtHiTVDelay */
+          0x44,           /* ; 5 StHiTVDelay */
+          0x44,           /* ; 6 ExtYPbPrDelay(525i) */
+          0x44,           /* ; 7 StYPbPrDealy(525i) */
+          0x44,           /* ; 8 ExtYPbPrDelay(525p) */
+          0x44,           /* ; 9 StYPbPrDealy(525p) */
+          0x44,           /* ; A ExtYPbPrDelay(750p) */
+          0x44            /* ; B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList[]=
+{
+	0x22,            /* ; 0 ExtNTSCDelay */
+	0x22,            /* ; 1 StNTSCDelay */
+	0x22,            /* ; 2 ExtPALDelay */
+	0x22,            /* ; 3 StPALDelay */
+	0x88,            /* ; 4 ExtHiTVDelay(1080i) */
+	0xBB,            /* ; 5 StHiTVDelay(1080i) */
+	0x22,            /* ; 6 ExtYPbPrDelay(525i) */
+	0x22,            /* ; 7 StYPbPrDealy(525i) */
+	0x22,            /* ; 8 ExtYPbPrDelay(525p) */
+	0x22,            /* ; 9 StYPbPrDealy(525p) */
+	0x22,            /* ; A ExtYPbPrDelay(750p) */
+	0x22            /* B StYPbPrDealy(750p) */
+};
+
+UCHAR XGI301TVDelayList2[]=
+{
+	0x22,           /* ; 0 ExtNTSCDelay */
+	0x22,           /* ; 1 StNTSCDelay */
+	0x22,           /* ; 2 ExtPALDelay */
+	0x22,           /* ; 3 StPALDelay */
+	0x22,           /* ; 4 ExtHiTVDelay */
+	0x22,           /* ; 5 StHiTVDelay */
+	0x22,           /* ; 6 ExtYPbPrDelay(525i) */
+	0x22,           /* ; 7 StYPbPrDealy(525i) */
+	0x22,           /* ; 8 ExtYPbPrDelay(525p) */
+	0x22,           /* ; 9 StYPbPrDealy(525p) */
+	0x22,           /* ; A ExtYPbPrDelay(750p) */
+	0x22            /* ; B StYPbPrDealy(750p) */
+};
+
+
+UCHAR TVAntiFlickList[]=
+{/* NTSCAntiFlicker */
+                      0x04,           /* ; 0 Adaptive */
+                      0x00,           /* ; 1 new anti-flicker ? */
+/* PALAntiFlicker */
+                      0x04,           /* ; 0 Adaptive */
+                      0x08,           /* ; 1 new anti-flicker ? */
+/* HiTVAntiFlicker */
+                      0x04,           /* ; 0 ? */
+                      0x00            /* ; 1 new anti-flicker ? */
+};
+
+
+UCHAR TVEdgeList[]=
+{
+      0x00,            /* ; 0 NTSC No Edge enhance */
+      0x04,            /* ; 1 NTSC Adaptive Edge enhance */
+      0x00,            /* ; 0 PAL No Edge enhance */
+      0x04,            /* ; 1 PAL Adaptive Edge enhance */
+      0x00,            /* ; 0 HiTV */
+      0x00             /* ; 1 HiTV */
+};
+
+ULONG TVPhaseList[]=
+{      0x08BAED21, /* ; 0 NTSC phase */
+       0x00E3052A, /* ; 1 PAL phase */
+       0x9B2EE421, /* ; 2 PAL-M phase */
+       0xBA3EF421, /* ; 3 PAL-N phase */
+       0xA7A28B1E, /* ; 4 NTSC 1024x768 */
+       0xE00A831E, /* ; 5 PAL-M 1024x768 */
+       0x00000000, /* ; 6 reserved */
+       0x00000000, /* ; 7 reserved */
+       0xD67BF021, /* ; 8 NTSC phase */
+       0xE986092A, /* ; 9 PAL phase */
+       0xA4EFE621, /* ; A PAL-M phase */
+       0x4694F621, /* ; B PAL-N phase */
+       0x8BDE711C, /* ; C NTSC 1024x768 */
+       0xE00A831E  /* ; D PAL-M 1024x768 */
+};
+
+UCHAR NTSCYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38     ,/* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
+                      0xEB,0x04,0x25,0x18     ,/* 2 : 640x text mode */
+                      0xF1,0x04,0x1F,0x18     ,/* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18     ,/* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6     /* 6 : 800x gra. mode */
+};
+
+UCHAR PALYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
+                      0xF1,0xF7,0x1F,0x32     ,/* 2 : 640x text mode */
+                      0xF3,0x00,0x1D,0x20     ,/* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38     ,/* 4 : 320x gra. mode */
+                      0xF1,0xF7,0x1F,0x32     ,/* 5 : 640x gra. mode */
+                      0xFC,0xFB,0x14,0x2A     /* 6 : 800x gra. mode */
+};
+
+UCHAR PALMYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+                      0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+                      0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFF,0xFF  /* End of Table */
+};
+
+UCHAR PALNYFilter1[]=
+{
+		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
+                      0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
+                      0xEB,0x04,0x10,0x18, /* 2 : 640x text mode */
+                      0xF7,0x06,0x19,0x14, /* 3 : 720x text mode */
+                      0x00,0xF4,0x10,0x38, /* 4 : 320x gra. mode */
+                      0xEB,0x04,0x25,0x18, /* 5 : 640x gra. mode */
+                      0xEB,0x15,0x25,0xF6, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFF,0xFF  /* End of Table */
+};
+
+UCHAR NTSCYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALMYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR PALNYFilter2[]=
+{
+		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 2 : 640x text mode */
+                      0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 3 : 720x text mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 4 : 320x gra. mode */
+                      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 5 : 640x gra. mode */
+                      0x01,0x01,0xFC,0xF8,0x08,0x26,0x38, /* 6 : 800x gra. mode */
+                      0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
+};
+
+UCHAR XGI_NTSC1024AdjTime[]=
+{
+      0xa7,0x07,0xf2,0x6e,0x17,0x8b,0x73,0x53,
+      0x13,0x40,0x34,0xF4,0x63,0xBB,0xCC,0x7A,
+      0x58,0xe4,0x73,0xd0,0x13
+};
+
+XGI301C_Tap4TimingStruct HiTVTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E  /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct EnlargeTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E   /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct NoScaleTap4Timing[]=
+{
+	{0,{
+	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
+	0x7D,0x20,0x04,0x7F,0x7D,0x1F,0x06,0x7E, /* ; C8-CF */
+	0x7C,0x1D,0x09,0x7E,0x7C,0x1B,0x0B,0x7E, /* ; D0-D7 */
+	0x7C,0x19,0x0E,0x7D,0x7C,0x17,0x11,0x7C, /* ; D8-DF */
+	0x7C,0x14,0x14,0x7C,0x7C,0x11,0x17,0x7C, /* ; E0-E7 */
+	0x7D,0x0E,0x19,0x7C,0x7E,0x0B,0x1B,0x7C, /* ; EA-EF */
+	0x7E,0x09,0x1D,0x7C,0x7F,0x06,0x1F,0x7C, /* ; F0-F7 */
+	0x7F,0x04,0x20,0x7D,0x00,0x02,0x20,0x7E  /* ; F8-FF */
+	}
+	}
+};
+
+XGI301C_Tap4TimingStruct PALTap4Timing[]=
+{
+	{600,  {
+                0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+                0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+                0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+                0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+                0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+                0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+                0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+                0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04  /* ; F8-FF */
+                }
+ 	},
+        {768,	{
+                0x08,0x12,0x08,0x7E,0x07,0x12,0x09,0x7E, /* ; C0-C7 */
+                0x06,0x12,0x0A,0x7E,0x05,0x11,0x0B,0x7F, /* ; C8-CF */
+                0x04,0x11,0x0C,0x7F,0x03,0x11,0x0C,0x00, /* ; D0-D7 */
+                0x03,0x10,0x0D,0x00,0x02,0x0F,0x0E,0x01, /* ; D8-DF */
+                0x01,0x0F,0x0F,0x01,0x01,0x0E,0x0F,0x02, /* ; E0-E7 */
+                0x00,0x0D,0x10,0x03,0x7F,0x0C,0x11,0x04, /* ; EA-EF */
+                0x7F,0x0C,0x11,0x04,0x7F,0x0B,0x11,0x05, /* ; F0-F7 */
+                0x7E,0x0A,0x12,0x06,0x7E,0x09,0x12,0x07  /* ; F8-FF */
+                }
+        },
+        {0xFFFF,
+        	{
+                0x04,0x1A,0x04,0x7E,0x02,0x1B,0x05,0x7E, /* ; C0-C7 */
+                0x01,0x1A,0x07,0x7E,0x00,0x1A,0x09,0x7D, /* ; C8-CF */
+                0x7F,0x19,0x0B,0x7D,0x7E,0x18,0x0D,0x7D, /* ; D0-D7 */
+                0x7D,0x17,0x10,0x7C,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+                0x7C,0x14,0x14,0x7C,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+                0x7C,0x10,0x17,0x7D,0x7C,0x0D,0x18,0x7F, /* ; EA-EF */
+                0x7D,0x0B,0x19,0x7F,0x7D,0x09,0x1A,0x00, /* ; F0-F7 */
+                0x7D,0x07,0x1A,0x02,0x7E,0x05,0x1B,0x02  /* ; F8-FF */
+                }
+        }
+};
+
+XGI301C_Tap4TimingStruct NTSCTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[]=
+{
+	{480,	{
+              	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
+              	0x01,0x1A,0x08,0x7D,0x00,0x19,0x0A,0x7D, /* ; C8-CF */
+              	0x7F,0x19,0x0C,0x7C,0x7E,0x18,0x0E,0x7C, /* ; D0-D7 */
+              	0x7E,0x17,0x10,0x7B,0x7D,0x15,0x12,0x7C, /* ; D8-DF */
+              	0x7D,0x13,0x13,0x7D,0x7C,0x12,0x15,0x7D, /* ; E0-E7 */
+              	0x7C,0x10,0x17,0x7D,0x7C,0x0E,0x18,0x7E, /* ; EA-EF */
+              	0x7D,0x0C,0x19,0x7E,0x7D,0x0A,0x19,0x00, /* ; F0-F7 */
+              	0x7D,0x08,0x1A,0x01,0x7E,0x06,0x1A,0x02  /* ; F8-FF */
+        	}
+        },
+        {600,	{
+              	0x07,0x14,0x07,0x7E,0x06,0x14,0x09,0x7D, /* ; C0-C7 */
+              	0x05,0x14,0x0A,0x7D,0x04,0x13,0x0B,0x7E, /* ; C8-CF */
+              	0x03,0x13,0x0C,0x7E,0x02,0x12,0x0D,0x7F, /* ; D0-D7 */
+              	0x01,0x12,0x0E,0x7F,0x01,0x11,0x0F,0x7F, /* ; D8-DF */
+              	0x01,0x10,0x10,0x00,0x7F,0x0F,0x11,0x01, /* ; E0-E7 */
+              	0x7F,0x0E,0x12,0x01,0x7E,0x0D,0x12,0x03, /* ; EA-EF */
+              	0x7E,0x0C,0x13,0x03,0x7E,0x0B,0x13,0x04, /* ; F0-F7 */
+              	0x7E,0x0A,0x14,0x04,0x7D,0x09,0x14,0x06  /* ; F8-FF */
+        	}
+        },
+        {0xFFFF,
+        	{
+              	0x09,0x0F,0x09,0x7F,0x08,0x0F,0x09,0x00, /* ; C0-C7 */
+              	0x07,0x0F,0x0A,0x00,0x06,0x0F,0x0A,0x01, /* ; C8-CF */
+              	0x06,0x0E,0x0B,0x01,0x05,0x0E,0x0B,0x02, /* ; D0-D7 */
+              	0x04,0x0E,0x0C,0x02,0x04,0x0D,0x0C,0x03, /* ; D8-DF */
+              	0x03,0x0D,0x0D,0x03,0x02,0x0C,0x0D,0x05, /* ; E0-E7 */
+              	0x02,0x0C,0x0E,0x04,0x01,0x0B,0x0E,0x06, /* ; EA-EF */
+              	0x01,0x0B,0x0E,0x06,0x00,0x0A,0x0F,0x07, /* ; F0-F7 */
+              	0x00,0x0A,0x0F,0x07,0x00,0x09,0x0F,0x08  /* ; F8-FF */
+        	}
+        }
+};
+
+XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[]=
+{        {0xFFFF,
+               {
+               0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
+               0x02,0x19,0x08,0x7D,0x01,0x18,0x0A,0x7D, /* ; C8-CF */
+               0x00,0x18,0x0C,0x7C,0x7F,0x17,0x0E,0x7C, /* ; D0-D7 */
+               0x7E,0x16,0x0F,0x7D,0x7E,0x14,0x11,0x7D, /* ; D8-DF */
+               0x7D,0x13,0x13,0x7D,0x7D,0x11,0x14,0x7E, /* ; E0-E7 */
+               0x7D,0x0F,0x16,0x7E,0x7D,0x0E,0x17,0x7E, /* ; EA-EF */
+               0x7D,0x0C,0x18,0x7F,0x7D,0x0A,0x18,0x01, /* ; F0-F7 */
+               0x7D,0x08,0x19,0x02,0x7D,0x06,0x19,0x04 /* F8-FF */
+               }
+        }
+};
diff --git a/drivers/staging/xgifb/vb_util.c b/drivers/staging/xgifb/vb_util.c
new file mode 100644
index 0000000..87531b4
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.c
@@ -0,0 +1,263 @@
+#include "osdef.h"
+#include "vb_def.h"
+#include "vgatypes.h"
+#include "vb_struct.h"
+
+#ifdef LINUX_KERNEL
+#include "XGIfb.h"
+#include <asm/io.h>
+#include <linux/types.h>
+#endif
+
+#ifdef TC
+#include <stdio.h>
+#include <string.h>
+#include <conio.h>
+#include <dos.h>
+#endif
+
+#ifdef WIN2000
+#include <dderror.h>
+#include <devioctl.h>
+#include <miniport.h>
+#include <ntddvdeo.h>
+#include <video.h>
+
+#include "xgiv.h"
+#include "dd_i2c.h"
+#include "tools.h"
+#endif
+
+#ifdef LINUX_XF86
+#include "xf86.h"
+#include "xf86PciInfo.h"
+#include "xgi.h"
+#include "xgi_regs.h"
+#endif
+
+
+
+
+void XGINew_SetReg1( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg2( ULONG , USHORT , USHORT ) ;
+void XGINew_SetReg3( ULONG , USHORT ) ;
+void XGINew_SetReg4( ULONG , ULONG ) ;
+UCHAR XGINew_GetReg1( ULONG , USHORT) ;
+UCHAR XGINew_GetReg2( ULONG ) ;
+ULONG XGINew_GetReg3( ULONG ) ;
+void XGINew_ClearDAC( PUCHAR ) ;
+void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg1 */
+/* Input : */
+/* Output : */
+/* Description : SR CRTC GR */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
+{
+#ifdef LINUX_XF86
+    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+    OutPortByte( ( PUCHAR )(ULONG)port + 1 , data ) ;
+#else
+    OutPortByte( port , index ) ;
+    OutPortByte( port + 1 , data ) ;
+#endif
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg2 */
+/* Input : */
+/* Output : */
+/* Description : AR( 3C0 ) */
+/* --------------------------------------------------------------------- */
+/*void XGINew_SetReg2( ULONG port , USHORT index , USHORT data )
+{
+    InPortByte( ( PUCHAR )port + 0x3da - 0x3c0 ) ;
+    OutPortByte( XGINew_P3c0 , index ) ;
+    OutPortByte( XGINew_P3c0 , data ) ;
+    OutPortByte( XGINew_P3c0 , 0x20 ) ;
+}*/
+
+
+/* --------------------------------------------------------------------- */
+/* Function : */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg3( ULONG port , USHORT data )
+{
+    OutPortByte( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetReg4 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetReg4( ULONG port , ULONG data )
+{
+    OutPortLong( port , data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg1 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg1( ULONG port , USHORT index )
+{
+    UCHAR data ;
+
+#ifdef LINUX_XF86
+    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
+    data = InPortByte( ( PUCHAR )(ULONG)port + 1 ) ;
+#else
+    OutPortByte( port , index ) ;
+    data = InPortByte( port + 1 ) ;
+#endif
+
+    return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg2 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+UCHAR XGINew_GetReg2( ULONG port )
+{
+    UCHAR data ;
+
+    data = InPortByte( port ) ;
+
+    return( data ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_GetReg3 */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+ULONG XGINew_GetReg3( ULONG port )
+{
+    ULONG data ;
+
+    data = InPortLong( port ) ;
+
+    return( data ) ;
+}
+
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegANDOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegANDOR( ULONG Port , USHORT Index , USHORT DataAND , USHORT DataOR )
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;		/* XGINew_Part1Port index 02 */
+    temp = ( temp & ( DataAND ) ) | DataOR ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegAND */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND)
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
+    temp &= DataAND ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : XGINew_SetRegOR */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void XGINew_SetRegOR( ULONG Port , USHORT Index , USHORT DataOR )
+{
+    USHORT temp ;
+
+    temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
+    temp |= DataOR ;
+    XGINew_SetReg1( Port , Index , temp ) ;
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : NewDelaySecond */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void NewDelaySeconds( int seconds )
+{
+#ifdef WIN2000
+    int j ;
+#endif
+    int i ;
+
+
+    for( i = 0 ; i < seconds ; i++ )
+    {
+#ifdef TC
+        delay( 1000 ) ;
+#endif
+
+#ifdef WIN2000
+
+        for ( j = 0 ; j < 20000 ; j++ )
+            VideoPortStallExecution( 50 ) ;
+#endif
+
+#ifdef WINCE_HEADER
+#endif
+
+#ifdef LINUX_KERNEL
+#endif
+    }
+}
+
+
+/* --------------------------------------------------------------------- */
+/* Function : Newdebugcode */
+/* Input : */
+/* Output : */
+/* Description : */
+/* --------------------------------------------------------------------- */
+void Newdebugcode( UCHAR code )
+{
+//    OutPortByte ( 0x80 , code ) ;
+    /* OutPortByte ( 0x300 , code ) ; */
+    /* NewDelaySeconds( 0x3 ) ; */
+}
+
+
+
diff --git a/drivers/staging/xgifb/vb_util.h b/drivers/staging/xgifb/vb_util.h
new file mode 100644
index 0000000..91779d8
--- /dev/null
+++ b/drivers/staging/xgifb/vb_util.h
@@ -0,0 +1,15 @@
+#ifndef _VBUTIL_
+#define _VBUTIL_
+extern   void     NewDelaySeconds( int );
+extern   void     Newdebugcode( UCHAR );
+extern   void     XGINew_SetReg1(ULONG, USHORT, USHORT);
+extern   void     XGINew_SetReg3(ULONG, USHORT);
+extern   UCHAR    XGINew_GetReg1(ULONG, USHORT);
+extern   UCHAR    XGINew_GetReg2(ULONG);
+extern   void     XGINew_SetReg4(ULONG, ULONG);
+extern   ULONG    XGINew_GetReg3(ULONG);
+extern   void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
+extern   void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+extern   void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+#endif
+
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
new file mode 100644
index 0000000..295ea86
--- /dev/null
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -0,0 +1,325 @@
+
+#ifndef _VGATYPES_
+#define _VGATYPES_
+
+#include "osdef.h"
+
+#ifdef LINUX_XF86
+#include "xf86Version.h"
+#include "xf86Pci.h"
+#endif
+
+#ifdef LINUX_KERNEL  /* We don't want the X driver to depend on kernel source */
+#include <linux/ioctl.h>
+#endif
+
+#ifndef FALSE
+#define FALSE   0
+#endif
+
+#ifndef TRUE
+#define TRUE    1
+#endif
+
+#ifndef NULL
+#define NULL    0
+#endif
+
+#ifndef CHAR
+typedef char CHAR;
+#endif
+
+#ifndef SHORT
+typedef short SHORT;
+#endif
+
+#ifndef LONG
+typedef long  LONG;
+#endif
+
+#ifndef UCHAR
+typedef unsigned char UCHAR;
+#endif
+
+#ifndef USHORT
+typedef unsigned short USHORT;
+#endif
+
+#ifndef ULONG
+typedef unsigned long ULONG;
+#endif
+
+#ifndef PUCHAR
+typedef UCHAR *PUCHAR;
+#endif
+
+#ifndef PUSHORT
+typedef USHORT *PUSHORT;
+#endif
+
+#ifndef PLONGU
+typedef ULONG *PULONG;
+#endif
+
+#ifndef VOID
+typedef void VOID;
+#endif
+
+#ifndef PVOID
+typedef void *PVOID;
+#endif
+
+#ifndef BOOLEAN
+typedef UCHAR BOOLEAN;
+#endif
+/*
+#ifndef bool
+typedef UCHAR bool;
+#endif
+*/
+#ifdef LINUX_KERNEL
+typedef unsigned long XGIIOADDRESS;
+#endif
+
+#ifdef LINUX_XF86
+#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
+typedef unsigned char IOADDRESS;
+typedef unsigned char XGIIOADDRESS;
+#else
+typedef IOADDRESS XGIIOADDRESS;
+#endif
+#endif
+
+#ifndef VBIOS_VER_MAX_LENGTH
+#define VBIOS_VER_MAX_LENGTH    4
+#endif
+
+#ifndef WIN2000
+
+#ifndef LINUX_KERNEL   /* For the linux kernel, this is defined in xgifb.h */
+#ifndef XGI_CHIP_TYPE
+typedef enum _XGI_CHIP_TYPE {
+    XGI_VGALegacy = 0,
+#ifdef LINUX_XF86
+    XGI_530,
+    XGI_OLD,
+#endif
+    XGI_300,
+    XGI_630,
+    XGI_640,
+    XGI_315H,
+    XGI_315,
+    XGI_315PRO,
+    XGI_550,
+    XGI_650,
+    XGI_650M,
+    XGI_740,
+    XGI_330,
+    XGI_661,
+    XGI_660,
+    XGI_760,
+    XG40 = 32,
+    XG41,
+    XG42,
+    XG45,
+    XG20 = 48,
+    XG21,
+    XG27,
+    MAX_XGI_CHIP
+} XGI_CHIP_TYPE;
+#endif
+#endif
+
+#ifndef XGI_VB_CHIP_TYPE
+typedef enum _XGI_VB_CHIP_TYPE {
+    VB_CHIP_Legacy = 0,
+    VB_CHIP_301,
+    VB_CHIP_301B,
+    VB_CHIP_301LV,
+    VB_CHIP_302,
+    VB_CHIP_302B,
+    VB_CHIP_302LV,
+    VB_CHIP_301C,
+    VB_CHIP_302ELV,
+    VB_CHIP_UNKNOWN, /* other video bridge or no video bridge */
+    MAX_VB_CHIP
+} XGI_VB_CHIP_TYPE;
+#endif
+
+#ifndef XGI_LCD_TYPE
+typedef enum _XGI_LCD_TYPE {
+    LCD_INVALID = 0,
+    LCD_320x480,       /* FSTN, DSTN */
+    LCD_640x480,
+    LCD_640x480_2,     /* FSTN, DSTN */
+    LCD_640x480_3,     /* FSTN, DSTN */
+    LCD_800x600,
+    LCD_848x480,
+    LCD_1024x600,
+    LCD_1024x768,
+    LCD_1152x768,
+    LCD_1152x864,
+    LCD_1280x720,
+    LCD_1280x768,
+    LCD_1280x800,
+    LCD_1280x960,
+    LCD_1280x1024,
+    LCD_1400x1050,
+    LCD_1600x1200,
+    LCD_1680x1050,
+    LCD_1920x1440,
+    LCD_2048x1536,
+    LCD_CUSTOM,
+    LCD_UNKNOWN
+} XGI_LCD_TYPE;
+#endif
+
+#endif   /* not WIN2000 */
+
+#ifndef PXGI_DSReg
+typedef struct _XGI_DSReg
+{
+  UCHAR  jIdx;
+  UCHAR  jVal;
+} XGI_DSReg, *PXGI_DSReg;
+#endif
+
+#ifndef XGI_HW_DEVICE_INFO
+
+typedef struct _XGI_HW_DEVICE_INFO  XGI_HW_DEVICE_INFO, *PXGI_HW_DEVICE_INFO;
+
+typedef BOOLEAN (*PXGI_QUERYSPACE)   (PXGI_HW_DEVICE_INFO, ULONG, ULONG, ULONG *);
+
+struct _XGI_HW_DEVICE_INFO
+{
+    ULONG  ulExternalChip;       /* NO VB or other video bridge*/
+                                 /* if ujVBChipID = VB_CHIP_UNKNOWN, */
+#ifdef LINUX_XF86
+    PCITAG PciTag;		 /* PCI Tag */
+#endif
+
+    PUCHAR  pjVirtualRomBase;    /* ROM image */
+
+    BOOLEAN UseROM;		 /* Use the ROM image if provided */
+
+    PVOID   pDevice;
+
+    PUCHAR  pjVideoMemoryAddress;/* base virtual memory address */
+                                 /* of Linear VGA memory */
+
+    ULONG  ulVideoMemorySize;    /* size, in bytes, of the memory on the board */
+
+    PUCHAR pjIOAddress;          /* base I/O address of VGA ports (0x3B0) */
+
+    PUCHAR pjCustomizedROMImage;
+
+    PUCHAR pj2ndVideoMemoryAddress;
+    ULONG  ul2ndVideoMemorySize;
+
+    PUCHAR pj2ndIOAddress;
+/*#ifndef WIN2000
+    XGIIOADDRESS pjIOAddress;   //  base I/O address of VGA ports (0x3B0)
+#endif */
+    UCHAR  jChipType;            /* Used to Identify Graphics Chip */
+                                 /* defined in the data structure type  */
+                                 /* "XGI_CHIP_TYPE" */
+
+    UCHAR  jChipRevision;        /* Used to Identify Graphics Chip Revision */
+
+    UCHAR  ujVBChipID;           /* the ID of video bridge */
+                                 /* defined in the data structure type */
+                                 /* "XGI_VB_CHIP_TYPE" */
+
+    BOOLEAN    bNewScratch;
+
+    ULONG  ulCRT2LCDType;        /* defined in the data structure type */
+
+    ULONG usExternalChip;       /* NO VB or other video bridge (other than  */
+                                 /*  video bridge) */
+
+    BOOLEAN bIntegratedMMEnabled;/* supporting integration MM enable */
+
+    BOOLEAN bSkipDramSizing;     /* True: Skip video memory sizing. */
+
+    BOOLEAN bSkipSense;
+
+    BOOLEAN bIsPowerSaving;     /* True: XGIInit() is invoked by power management,
+                                   otherwise by 2nd adapter's initialzation */
+
+    PXGI_DSReg  pSR;             /* restore SR registers in initial function. */
+                                 /* end data :(idx, val) =  (FF, FF). */
+                                 /* Note : restore SR registers if  */
+                                 /* bSkipDramSizing = TRUE */
+
+    PXGI_DSReg  pCR;             /* restore CR registers in initial function. */
+                                 /* end data :(idx, val) =  (FF, FF) */
+                                 /* Note : restore cR registers if  */
+                                 /* bSkipDramSizing = TRUE */
+/*
+#endif
+*/
+
+    PXGI_QUERYSPACE  pQueryVGAConfigSpace;
+
+    PXGI_QUERYSPACE  pQueryNorthBridgeSpace;
+
+    UCHAR  szVBIOSVer[VBIOS_VER_MAX_LENGTH];
+
+};
+#endif
+
+/* Addtional IOCTL for communication xgifb <> X driver        */
+/* If changing this, xgifb.h must also be changed (for xgifb) */
+
+#ifdef LINUX_XF86  /* We don't want the X driver to depend on the kernel source */
+
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define XGIFB_GET_INFO    0x80046ef8  /* Wow, what a terrible hack... */
+
+/* Structure argument for XGIFB_GET_INFO ioctl  */
+typedef struct _XGIFB_INFO xgifb_info, *pxgifb_info;
+
+struct _XGIFB_INFO {
+	CARD32 	xgifb_id;         	/* for identifying xgifb */
+#ifndef XGIFB_ID
+#define XGIFB_ID	  0x53495346    /* Identify myself with 'XGIF' */
+#endif
+ 	CARD32 	chip_id;		/* PCI ID of detected chip */
+	CARD32	memory;			/* video memory in KB which xgifb manages */
+	CARD32	heapstart;             	/* heap start (= xgifb "mem" argument) in KB */
+	CARD8 	fbvidmode;		/* current xgifb mode */
+
+	CARD8 	xgifb_version;
+	CARD8	xgifb_revision;
+	CARD8 	xgifb_patchlevel;
+
+	CARD8 	xgifb_caps;		/* xgifb's capabilities */
+
+	CARD32 	xgifb_tqlen;		/* turbo queue length (in KB) */
+
+	CARD32 	xgifb_pcibus;      	/* The card's PCI ID */
+	CARD32 	xgifb_pcislot;
+	CARD32 	xgifb_pcifunc;
+
+	CARD8 	xgifb_lcdpdc;
+
+	CARD8	xgifb_lcda;
+
+	CARD32	xgifb_vbflags;
+	CARD32	xgifb_currentvbflags;
+
+	CARD32 	xgifb_scalelcd;
+	CARD32 	xgifb_specialtiming;
+
+	CARD8 	xgifb_haveemi;
+	CARD8 	xgifb_emi30,xgifb_emi31,xgifb_emi32,xgifb_emi33;
+	CARD8 	xgifb_haveemilcd;
+
+	CARD8 	xgifb_lcdpdca;
+
+	CARD8 reserved[212]; 		/* for future use */
+};
+#endif
+
+#endif
+
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0c2f14f..162c95a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1201,7 +1201,7 @@
 		if (rcv->urb == NULL) {
 			dev_dbg(&intf->dev,
 				"out of memory (read urbs usb_alloc_urb)\n");
-			goto alloc_fail7;
+			goto alloc_fail6;
 		}
 
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1225,7 +1225,7 @@
 		if (snd->urb == NULL) {
 			dev_dbg(&intf->dev,
 				"out of memory (write urbs usb_alloc_urb)");
-			goto alloc_fail7;
+			goto alloc_fail8;
 		}
 
 		if (usb_endpoint_xfer_int(epwrite))
@@ -1264,6 +1264,7 @@
 		i = device_create_file(&intf->dev,
 						&dev_attr_iCountryCodeRelDate);
 		if (i < 0) {
+			device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
 			kfree(acm->country_codes);
 			goto skip_countries;
 		}
@@ -1300,6 +1301,7 @@
 		usb_free_urb(acm->wb[i].urb);
 alloc_fail7:
 	acm_read_buffers_free(acm);
+alloc_fail6:
 	for (i = 0; i < num_rx_buf; i++)
 		usb_free_urb(acm->ru[i].urb);
 	usb_free_urb(acm->ctrlurb);
@@ -1594,6 +1596,7 @@
 	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ded550e..a6bd53a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1272,8 +1272,7 @@
 
 static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
 {
-	int			w, i;
-	struct usb_interface	*intf;
+	int	w;
 
 	/* Remote wakeup is needed only when we actually go to sleep.
 	 * For things like FREEZE and QUIESCE, if the device is already
@@ -1285,16 +1284,10 @@
 		return;
 	}
 
-	/* If remote wakeup is permitted, see whether any interface drivers
+	/* Enable remote wakeup if it is allowed, even if no interface drivers
 	 * actually want it.
 	 */
-	w = 0;
-	if (device_may_wakeup(&udev->dev) && udev->actconfig) {
-		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
-			intf = udev->actconfig->interface[i];
-			w |= intf->needs_remote_wakeup;
-		}
-	}
+	w = device_may_wakeup(&udev->dev);
 
 	/* If the device is autosuspended with the wrong wakeup setting,
 	 * autoresume now so the setting can be changed.
@@ -1328,6 +1321,7 @@
 
 	/* For all other calls, take the device back to full power and
 	 * tell the PM core in case it was autosuspended previously.
+	 * Unbind the interfaces that will need rebinding later.
 	 */
 	} else {
 		status = usb_resume_both(udev, msg);
@@ -1336,6 +1330,7 @@
 			pm_runtime_set_active(dev);
 			pm_runtime_enable(dev);
 			udev->last_busy = jiffies;
+			do_unbind_rebind(udev, DO_REBIND);
 		}
 	}
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbb..70cccc7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
 				udev->speed = USB_SPEED_WIRELESS;
+			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+				udev->speed = USB_SPEED_SUPER;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index a73e08f..fd4c36e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -416,8 +416,11 @@
 			/* A length of zero means transfer the whole sg list */
 			len = length;
 			if (len == 0) {
-				for_each_sg(sg, sg, nents, i)
-					len += sg->length;
+				struct scatterlist	*sg2;
+				int			j;
+
+				for_each_sg(sg, sg2, nents, j)
+					len += sg2->length;
 			}
 		} else {
 			/*
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03d..db99c08 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Artisman Watchdog Dongle */
+	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -64,6 +68,9 @@
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
+	/* Broadcom BCM92035DGROM BT dongle */
+	{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 649c0c5..591ae9f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -295,6 +295,7 @@
 	boolean "S3C HS/OtG USB Device controller"
 	depends on S3C_DEV_USB_HSOTG
 	select USB_GADGET_S3C_HSOTG_PIO
+	select USB_GADGET_DUALSPEED
 	help
 	  The Samsung S3C64XX USB2.0 high-speed gadget controller
 	  integrated into the S3C64XX series SoC.
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index eaa79c8..93ead19 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,11 +76,12 @@
 static const char driver_name [] = "at91_udc";
 static const char ep0name[] = "ep0";
 
+#define VBUS_POLL_TIMEOUT	msecs_to_jiffies(1000)
 
-#define at91_udp_read(dev, reg) \
-	__raw_readl((dev)->udp_baseaddr + (reg))
-#define at91_udp_write(dev, reg, val) \
-	__raw_writel((val), (dev)->udp_baseaddr + (reg))
+#define at91_udp_read(udc, reg) \
+	__raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+	__raw_writel((val), (udc)->udp_baseaddr + (reg))
 
 /*-------------------------------------------------------------------------*/
 
@@ -102,8 +103,9 @@
 	u32			csr;
 	struct at91_request	*req;
 	unsigned long	flags;
+	struct at91_udc	*udc = ep->udc;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	csr = __raw_readl(ep->creg);
 
@@ -147,7 +149,7 @@
 				&req->req, length,
 				req->req.length, req->req.buf);
 	}
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
@@ -272,7 +274,9 @@
 		VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
 
 	ep->stopped = 1;
+	spin_unlock(&udc->lock);
 	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
 	ep->stopped = stopped;
 
 	/* ep0 is always ready; other endpoints need a non-empty queue */
@@ -472,7 +476,7 @@
 				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
-	struct at91_udc	*dev = ep->udc;
+	struct at91_udc	*udc = ep->udc;
 	u16		maxpacket;
 	u32		tmp;
 	unsigned long	flags;
@@ -487,7 +491,7 @@
 		return -EINVAL;
 	}
 
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("bogus device state\n");
 		return -ESHUTDOWN;
 	}
@@ -521,7 +525,7 @@
 	}
 
 ok:
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	/* initialize endpoint to match this descriptor */
 	ep->is_in = usb_endpoint_dir_in(desc);
@@ -540,10 +544,10 @@
 	 * reset/init endpoint fifo.  NOTE:  leaves fifo_bank alone,
 	 * since endpoint resets don't reset hw pingpong state.
 	 */
-	at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
-	at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+	at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+	at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -556,7 +560,7 @@
 	if (ep == &ep->udc->ep[0])
 		return -EINVAL;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	nuke(ep, -ESHUTDOWN);
 
@@ -571,7 +575,7 @@
 		__raw_writel(0, ep->creg);
 	}
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -607,7 +611,7 @@
 {
 	struct at91_request	*req;
 	struct at91_ep		*ep;
-	struct at91_udc		*dev;
+	struct at91_udc		*udc;
 	int			status;
 	unsigned long		flags;
 
@@ -625,9 +629,9 @@
 		return -EINVAL;
 	}
 
-	dev = ep->udc;
+	udc = ep->udc;
 
-	if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+	if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("invalid device\n");
 		return -EINVAL;
 	}
@@ -635,7 +639,7 @@
 	_req->status = -EINPROGRESS;
 	_req->actual = 0;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	/* try to kickstart any empty and idle queue */
 	if (list_empty(&ep->queue) && !ep->stopped) {
@@ -653,7 +657,7 @@
 		if (is_ep0) {
 			u32	tmp;
 
-			if (!dev->req_pending) {
+			if (!udc->req_pending) {
 				status = -EINVAL;
 				goto done;
 			}
@@ -662,11 +666,11 @@
 			 * defer changing CONFG until after the gadget driver
 			 * reconfigures the endpoints.
 			 */
-			if (dev->wait_for_config_ack) {
-				tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+			if (udc->wait_for_config_ack) {
+				tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
 				tmp ^= AT91_UDP_CONFG;
 				VDBG("toggle config\n");
-				at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+				at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
 			}
 			if (req->req.length == 0) {
 ep0_in_status:
@@ -676,7 +680,7 @@
 				tmp &= ~SET_FX;
 				tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
 				__raw_writel(tmp, ep->creg);
-				dev->req_pending = 0;
+				udc->req_pending = 0;
 				goto done;
 			}
 		}
@@ -695,31 +699,40 @@
 
 	if (req && !status) {
 		list_add_tail (&req->queue, &ep->queue);
-		at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+		at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
 	}
 done:
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return (status < 0) ? status : 0;
 }
 
 static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 {
-	struct at91_ep	*ep;
+	struct at91_ep		*ep;
 	struct at91_request	*req;
+	unsigned long		flags;
+	struct at91_udc		*udc;
 
 	ep = container_of(_ep, struct at91_ep, ep);
 	if (!_ep || ep->ep.name == ep0name)
 		return -EINVAL;
 
+	udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
 	/* make sure it's actually queued on this endpoint */
 	list_for_each_entry (req, &ep->queue, queue) {
 		if (&req->req == _req)
 			break;
 	}
-	if (&req->req != _req)
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&udc->lock, flags);
 		return -EINVAL;
+	}
 
 	done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -736,7 +749,7 @@
 		return -EINVAL;
 
 	creg = ep->creg;
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	csr = __raw_readl(creg);
 
@@ -761,7 +774,7 @@
 		__raw_writel(csr, creg);
 	}
 
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return status;
 }
 
@@ -795,7 +808,7 @@
 	unsigned long	flags;
 
 	DBG("%s\n", __func__ );
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	if (!udc->clocked || !udc->suspended)
 		goto done;
@@ -809,7 +822,7 @@
 	at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
 
 done:
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return status;
 }
 
@@ -851,8 +864,11 @@
 		ep->stopped = 1;
 		nuke(ep, -ESHUTDOWN);
 	}
-	if (driver)
+	if (driver) {
+		spin_unlock(&udc->lock);
 		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
 
 	udc_reinit(udc);
 }
@@ -935,13 +951,13 @@
 	unsigned long	flags;
 
 	// VDBG("vbus %s\n", is_active ? "on" : "off");
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->vbus = (is_active != 0);
 	if (udc->driver)
 		pullup(udc, is_active);
 	else
 		pullup(udc, 0);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -950,10 +966,10 @@
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->enabled = is_on = !!is_on;
 	pullup(udc, is_on);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -962,9 +978,9 @@
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->selfpowered = (is_on != 0);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
 
@@ -1226,8 +1242,11 @@
 #undef w_length
 
 	/* pass request up to the gadget driver */
-	if (udc->driver)
+	if (udc->driver) {
+		spin_unlock(&udc->lock);
 		status = udc->driver->setup(&udc->gadget, &pkt.r);
+		spin_lock(&udc->lock);
+	}
 	else
 		status = -ENODEV;
 	if (status < 0) {
@@ -1378,6 +1397,9 @@
 	struct at91_udc		*udc = _udc;
 	u32			rescans = 5;
 	int			disable_clock = 0;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
 
 	if (!udc->clocked) {
 		clk_on(udc);
@@ -1433,8 +1455,11 @@
 			 * and then into standby to avoid drawing more than
 			 * 500uA power (2500uA for some high-power configs).
 			 */
-			if (udc->driver && udc->driver->suspend)
+			if (udc->driver && udc->driver->suspend) {
+				spin_unlock(&udc->lock);
 				udc->driver->suspend(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
 
 		/* host initiated resume */
 		} else if (status & AT91_UDP_RXRSM) {
@@ -1451,8 +1476,11 @@
 			 * would normally want to switch out of slow clock
 			 * mode into normal mode.
 			 */
-			if (udc->driver && udc->driver->resume)
+			if (udc->driver && udc->driver->resume) {
+				spin_unlock(&udc->lock);
 				udc->driver->resume(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
 
 		/* endpoint IRQs are cleared by handling them */
 		} else {
@@ -1474,6 +1502,8 @@
 	if (disable_clock)
 		clk_off(udc);
 
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return IRQ_HANDLED;
 }
 
@@ -1556,24 +1586,53 @@
 	/* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
 
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+	value ^= udc->board.vbus_active_low;
+	if (value != udc->vbus)
+		at91_vbus_session(&udc->gadget, value);
+}
+
 static irqreturn_t at91_vbus_irq(int irq, void *_udc)
 {
 	struct at91_udc	*udc = _udc;
-	unsigned	value;
 
 	/* vbus needs at least brief debouncing */
 	udelay(10);
-	value = gpio_get_value(udc->board.vbus_pin);
-	if (value != udc->vbus)
-		at91_vbus_session(&udc->gadget, value);
+	at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
 
 	return IRQ_HANDLED;
 }
 
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+	struct at91_udc *udc = container_of(work, struct at91_udc,
+					    vbus_timer_work);
+
+	at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+	if (!timer_pending(&udc->vbus_timer))
+		mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+	struct at91_udc *udc = (struct at91_udc *)data;
+
+	/*
+	 * If we are polling vbus it is likely that the gpio is on an
+	 * bus such as i2c or spi which may sleep, so schedule some work
+	 * to read the vbus gpio
+	 */
+	if (!work_pending(&udc->vbus_timer_work))
+		schedule_work(&udc->vbus_timer_work);
+}
+
 int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 {
 	struct at91_udc	*udc = &controller;
 	int		retval;
+	unsigned long	flags;
 
 	if (!driver
 			|| driver->speed < USB_SPEED_FULL
@@ -1605,9 +1664,9 @@
 		return retval;
 	}
 
-	local_irq_disable();
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(udc, 1);
-	local_irq_enable();
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	DBG("bound to %s\n", driver->driver.name);
 	return 0;
@@ -1617,15 +1676,16 @@
 int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 {
 	struct at91_udc *udc = &controller;
+	unsigned long	flags;
 
 	if (!driver || driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
-	local_irq_disable();
+	spin_lock_irqsave(&udc->lock, flags);
 	udc->enabled = 0;
 	at91_udp_write(udc, AT91_UDP_IDR, ~0);
 	pullup(udc, 0);
-	local_irq_enable();
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
@@ -1641,8 +1701,13 @@
 
 static void at91udc_shutdown(struct platform_device *dev)
 {
+	struct at91_udc *udc = platform_get_drvdata(dev);
+	unsigned long	flags;
+
 	/* force disconnect on reboot */
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(platform_get_drvdata(dev), 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
 static int __init at91udc_probe(struct platform_device *pdev)
@@ -1683,6 +1748,7 @@
 	udc->board = *(struct at91_udc_data *) dev->platform_data;
 	udc->pdev = pdev;
 	udc->enabled = 0;
+	spin_lock_init(&udc->lock);
 
 	/* rm9200 needs manual D+ pullup; off by default */
 	if (cpu_is_at91rm9200()) {
@@ -1763,13 +1829,23 @@
 		 * Get the initial state of VBUS - we cannot expect
 		 * a pending interrupt.
 		 */
-		udc->vbus = gpio_get_value(udc->board.vbus_pin);
-		if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
-				IRQF_DISABLED, driver_name, udc)) {
-			DBG("request vbus irq %d failed\n",
-					udc->board.vbus_pin);
-			retval = -EBUSY;
-			goto fail3;
+		udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+			udc->board.vbus_active_low;
+
+		if (udc->board.vbus_polled) {
+			INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+			setup_timer(&udc->vbus_timer, at91_vbus_timer,
+				    (unsigned long)udc);
+			mod_timer(&udc->vbus_timer,
+				  jiffies + VBUS_POLL_TIMEOUT);
+		} else {
+			if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+					IRQF_DISABLED, driver_name, udc)) {
+				DBG("request vbus irq %d failed\n",
+				    udc->board.vbus_pin);
+				retval = -EBUSY;
+				goto fail3;
+			}
 		}
 	} else {
 		DBG("no VBUS detection, assuming always-on\n");
@@ -1804,13 +1880,16 @@
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	struct resource *res;
+	unsigned long	flags;
 
 	DBG("remove\n");
 
 	if (udc->driver)
 		return -EBUSY;
 
+	spin_lock_irqsave(&udc->lock, flags);
 	pullup(udc, 0);
+	spin_unlock_irqrestore(&udc->lock, flags);
 
 	device_init_wakeup(&pdev->dev, 0);
 	remove_debug_file(udc);
@@ -1840,6 +1919,7 @@
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	int		wake = udc->driver && device_may_wakeup(&pdev->dev);
+	unsigned long	flags;
 
 	/* Unless we can act normally to the host (letting it wake us up
 	 * whenever it has work for us) force disconnect.  Wakeup requires
@@ -1849,13 +1929,15 @@
 	if ((!udc->suspended && udc->addr)
 			|| !wake
 			|| at91_suspend_entering_slow_clock()) {
+		spin_lock_irqsave(&udc->lock, flags);
 		pullup(udc, 0);
 		wake = 0;
+		spin_unlock_irqrestore(&udc->lock, flags);
 	} else
 		enable_irq_wake(udc->udp_irq);
 
 	udc->active_suspend = wake;
-	if (udc->board.vbus_pin > 0 && wake)
+	if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
 		enable_irq_wake(udc->board.vbus_pin);
 	return 0;
 }
@@ -1863,15 +1945,20 @@
 static int at91udc_resume(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
+	unsigned long	flags;
 
-	if (udc->board.vbus_pin > 0 && udc->active_suspend)
+	if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+	    udc->active_suspend)
 		disable_irq_wake(udc->board.vbus_pin);
 
 	/* maybe reconnect to host; if so, clocks on */
 	if (udc->active_suspend)
 		disable_irq_wake(udc->udp_irq);
-	else
+	else {
+		spin_lock_irqsave(&udc->lock, flags);
 		pullup(udc, 1);
+		spin_unlock_irqrestore(&udc->lock, flags);
+	}
 	return 0;
 }
 #else
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index c65d622..108ca54 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -144,6 +144,9 @@
 	struct proc_dir_entry		*pde;
 	void __iomem			*udp_baseaddr;
 	int				udp_irq;
+	spinlock_t			lock;
+	struct timer_list		vbus_timer;
+	struct work_struct		vbus_timer_work;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 43bf445..b91115f 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -101,7 +101,7 @@
 static struct usb_audio_control mute_control = {
 	.list = LIST_HEAD_INIT(mute_control.list),
 	.name = "Mute Control",
-	.type = UAC_MUTE_CONTROL,
+	.type = UAC_FU_MUTE,
 	/* Todo: add real Mute control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
@@ -110,7 +110,7 @@
 static struct usb_audio_control volume_control = {
 	.list = LIST_HEAD_INIT(volume_control.list),
 	.name = "Volume Control",
-	.type = UAC_VOLUME_CONTROL,
+	.type = UAC_FU_VOLUME,
 	/* Todo: add real Volume control code */
 	.set = generic_set_cmd,
 	.get = generic_get_cmd,
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 38226e9..95dd4662 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -469,8 +469,7 @@
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);
 				crc2 = ~crc32_le(~0,
-						skb->data,
-						skb->len - ETH_FCS_LEN);
+						skb->data, len - ETH_FCS_LEN);
 			} else {
 				crc = get_unaligned_be32(skb->data + len
 							- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index d69eccf..2aaa0f7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -136,7 +136,7 @@
 	 * handling setup requests immidiatelly user space may be so
 	 * slow that another setup will be sent to the gadget but this
 	 * time not to us but another function and then there could be
-	 * a race.  Is taht the case? Or maybe we can use cdev->req
+	 * a race.  Is that the case? Or maybe we can use cdev->req
 	 * after all, maybe we just need some spinlock for that? */
 	struct usb_request		*ep0req;		/* P: mutex */
 	struct completion		ep0req_completion;	/* P: mutex */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 7d05a0b..4ce899c 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -321,8 +321,8 @@
 /* Data shared by all the FSG instances. */
 struct fsg_common {
 	struct usb_gadget	*gadget;
-	struct fsg_dev		*fsg;
-	struct fsg_dev		*prev_fsg;
+	struct fsg_dev		*fsg, *new_fsg;
+	wait_queue_head_t	fsg_wait;
 
 	/* filesem protects: backing files in use */
 	struct rw_semaphore	filesem;
@@ -351,7 +351,6 @@
 	enum fsg_state		state;		/* For exception handling */
 	unsigned int		exception_req_tag;
 
-	u8			config, new_config;
 	enum data_direction	data_dir;
 	u32			data_size;
 	u32			data_size_from_cmnd;
@@ -595,7 +594,7 @@
 	u16			w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
-	if (!fsg->common->config)
+	if (!fsg_is_set(fsg->common))
 		return -EOPNOTSUPP;
 
 	switch (ctrl->bRequest) {
@@ -2303,24 +2302,20 @@
 	return -ENOMEM;
 }
 
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface.  The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_common *common, int altsetting)
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
 {
-	int	rc = 0;
-	int	i;
-	const struct usb_endpoint_descriptor	*d;
+	const struct usb_endpoint_descriptor *d;
+	struct fsg_dev *fsg;
+	int i, rc = 0;
 
 	if (common->running)
 		DBG(common, "reset interface\n");
 
 reset:
 	/* Deallocate the requests */
-	if (common->prev_fsg) {
-		struct fsg_dev *fsg = common->prev_fsg;
+	if (common->fsg) {
+		fsg = common->fsg;
 
 		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
 			struct fsg_buffhd *bh = &common->buffhds[i];
@@ -2345,88 +2340,53 @@
 			fsg->bulk_out_enabled = 0;
 		}
 
-		common->prev_fsg = 0;
+		common->fsg = NULL;
+		wake_up(&common->fsg_wait);
 	}
 
 	common->running = 0;
-	if (altsetting < 0 || rc != 0)
+	if (!new_fsg || rc)
 		return rc;
 
-	DBG(common, "set interface %d\n", altsetting);
+	common->fsg = new_fsg;
+	fsg = common->fsg;
 
-	if (fsg_is_set(common)) {
-		struct fsg_dev *fsg = common->fsg;
-		common->prev_fsg = common->fsg;
+	/* Enable the endpoints */
+	d = fsg_ep_desc(common->gadget,
+			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+	rc = enable_endpoint(common, fsg->bulk_in, d);
+	if (rc)
+		goto reset;
+	fsg->bulk_in_enabled = 1;
 
-		/* Enable the endpoints */
-		d = fsg_ep_desc(common->gadget,
-				&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
-		rc = enable_endpoint(common, fsg->bulk_in, d);
+	d = fsg_ep_desc(common->gadget,
+			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+	rc = enable_endpoint(common, fsg->bulk_out, d);
+	if (rc)
+		goto reset;
+	fsg->bulk_out_enabled = 1;
+	common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
+
+	/* Allocate the requests */
+	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		struct fsg_buffhd	*bh = &common->buffhds[i];
+
+		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
 		if (rc)
 			goto reset;
-		fsg->bulk_in_enabled = 1;
-
-		d = fsg_ep_desc(common->gadget,
-				&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
-		rc = enable_endpoint(common, fsg->bulk_out, d);
+		rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
 		if (rc)
 			goto reset;
-		fsg->bulk_out_enabled = 1;
-		common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
-		clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
-		/* Allocate the requests */
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
-			struct fsg_buffhd	*bh = &common->buffhds[i];
-
-			rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
-			if (rc)
-				goto reset;
-			rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
-			if (rc)
-				goto reset;
-			bh->inreq->buf = bh->outreq->buf = bh->buf;
-			bh->inreq->context = bh->outreq->context = bh;
-			bh->inreq->complete = bulk_in_complete;
-			bh->outreq->complete = bulk_out_complete;
-		}
-
-		common->running = 1;
-		for (i = 0; i < common->nluns; ++i)
-			common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-		return rc;
-	} else {
-		return -EIO;
-	}
-}
-
-
-/*
- * Change our operational configuration.  This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions.  Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_common *common, u8 new_config)
-{
-	int	rc = 0;
-
-	/* Disable the single interface */
-	if (common->config != 0) {
-		DBG(common, "reset config\n");
-		common->config = 0;
-		rc = do_set_interface(common, -1);
+		bh->inreq->buf = bh->outreq->buf = bh->buf;
+		bh->inreq->context = bh->outreq->context = bh;
+		bh->inreq->complete = bulk_in_complete;
+		bh->outreq->complete = bulk_out_complete;
 	}
 
-	/* Enable the interface */
-	if (new_config != 0) {
-		common->config = new_config;
-		rc = do_set_interface(common, 0);
-		if (rc != 0)
-			common->config = 0;	/* Reset on errors */
-	}
+	common->running = 1;
+	for (i = 0; i < common->nluns; ++i)
+		common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
 	return rc;
 }
 
@@ -2437,9 +2397,7 @@
 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->prev_fsg = fsg->common->fsg;
-	fsg->common->fsg = fsg;
-	fsg->common->new_config = 1;
+	fsg->common->new_fsg = fsg;
 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
 	return 0;
 }
@@ -2447,9 +2405,7 @@
 static void fsg_disable(struct usb_function *f)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->prev_fsg = fsg->common->fsg;
-	fsg->common->fsg = fsg;
-	fsg->common->new_config = 0;
+	fsg->common->new_fsg = NULL;
 	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
 }
 
@@ -2459,19 +2415,17 @@
 static void handle_exception(struct fsg_common *common)
 {
 	siginfo_t		info;
-	int			sig;
 	int			i;
 	struct fsg_buffhd	*bh;
 	enum fsg_state		old_state;
-	u8			new_config;
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
-	int			rc;
 
 	/* Clear the existing signals.  Anything but SIGUSR1 is converted
 	 * into a high-priority EXIT exception. */
 	for (;;) {
-		sig = dequeue_signal_lock(current, &current->blocked, &info);
+		int sig =
+			dequeue_signal_lock(current, &current->blocked, &info);
 		if (!sig)
 			break;
 		if (sig != SIGUSR1) {
@@ -2482,7 +2436,7 @@
 	}
 
 	/* Cancel all the pending transfers */
-	if (fsg_is_set(common)) {
+	if (likely(common->fsg)) {
 		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
 			bh = &common->buffhds[i];
 			if (bh->inreq_busy)
@@ -2523,7 +2477,6 @@
 	common->next_buffhd_to_fill = &common->buffhds[0];
 	common->next_buffhd_to_drain = &common->buffhds[0];
 	exception_req_tag = common->exception_req_tag;
-	new_config = common->new_config;
 	old_state = common->state;
 
 	if (old_state == FSG_STATE_ABORT_BULK_OUT)
@@ -2573,12 +2526,12 @@
 		break;
 
 	case FSG_STATE_CONFIG_CHANGE:
-		rc = do_set_config(common, new_config);
+		do_set_interface(common, common->new_fsg);
 		break;
 
 	case FSG_STATE_EXIT:
 	case FSG_STATE_TERMINATED:
-		do_set_config(common, 0);		/* Free resources */
+		do_set_interface(common, NULL);		/* Free resources */
 		spin_lock_irq(&common->lock);
 		common->state = FSG_STATE_TERMINATED;	/* Stop the thread */
 		spin_unlock_irq(&common->lock);
@@ -2863,6 +2816,7 @@
 		goto error_release;
 	}
 	init_completion(&common->thread_notifier);
+	init_waitqueue_head(&common->fsg_wait);
 #undef OR
 
 
@@ -2957,9 +2911,17 @@
 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
+	struct fsg_common	*common = fsg->common;
 
 	DBG(fsg, "unbind\n");
-	fsg_common_put(fsg->common);
+	if (fsg->common->fsg == fsg) {
+		fsg->common->new_fsg = NULL;
+		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		/* FIXME: make interruptible or killable somehow? */
+		wait_event(common->fsg_wait, common->fsg != fsg);
+	}
+
+	fsg_common_put(common);
 	usb_free_descriptors(fsg->function.descriptors);
 	usb_free_descriptors(fsg->function.hs_descriptors);
 	kfree(fsg);
@@ -2970,7 +2932,6 @@
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_gadget	*gadget = c->cdev->gadget;
-	int			rc;
 	int			i;
 	struct usb_ep		*ep;
 
@@ -2996,6 +2957,11 @@
 	ep->driver_data = fsg->common;	/* claim the endpoint */
 	fsg->bulk_out = ep;
 
+	/* Copy descriptors */
+	f->descriptors = usb_copy_descriptors(fsg_fs_function);
+	if (unlikely(!f->descriptors))
+		return -ENOMEM;
+
 	if (gadget_is_dualspeed(gadget)) {
 		/* Assume endpoint addresses are the same for both speeds */
 		fsg_hs_bulk_in_desc.bEndpointAddress =
@@ -3003,16 +2969,17 @@
 		fsg_hs_bulk_out_desc.bEndpointAddress =
 			fsg_fs_bulk_out_desc.bEndpointAddress;
 		f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
-		if (unlikely(!f->hs_descriptors))
+		if (unlikely(!f->hs_descriptors)) {
+			usb_free_descriptors(f->descriptors);
 			return -ENOMEM;
+		}
 	}
 
 	return 0;
 
 autoconf_fail:
 	ERROR(fsg, "unable to autoconfigure all endpoints\n");
-	rc = -ENOTSUPP;
-	return rc;
+	return -ENOTSUPP;
 }
 
 
@@ -3036,11 +3003,6 @@
 
 	fsg->function.name        = FSG_DRIVER_DESC;
 	fsg->function.strings     = fsg_strings_array;
-	fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
-	if (unlikely(!fsg->function.descriptors)) {
-		rc = -ENOMEM;
-		goto error_free_fsg;
-	}
 	fsg->function.bind        = fsg_bind;
 	fsg->function.unbind      = fsg_unbind;
 	fsg->function.setup       = fsg_setup;
@@ -3056,19 +3018,9 @@
 
 	rc = usb_add_function(c, &fsg->function);
 	if (unlikely(rc))
-		goto error_free_all;
-
-	fsg_common_get(fsg->common);
-	return 0;
-
-error_free_all:
-	usb_free_descriptors(fsg->function.descriptors);
-	/* fsg_bind() might have copied those; or maybe not? who cares
-	 * -- free it just in case. */
-	usb_free_descriptors(fsg->function.hs_descriptors);
-error_free_fsg:
-	kfree(fsg);
-
+		kfree(fsg);
+	else
+		fsg_common_get(fsg->common);
 	return rc;
 }
 
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index fc2611f..dbe6db0 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -28,7 +28,7 @@
 
 #include "uvc.h"
 
-unsigned int uvc_trace_param;
+unsigned int uvc_gadget_trace_param;
 
 /* --------------------------------------------------------------------------
  * Function descriptors
@@ -656,6 +656,6 @@
 	return ret;
 }
 
-module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+module_param_named(trace, uvc_gadget_trace_param, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(trace, "Trace level bitmask");
 
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index d0b8bde..eafa6d2 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -30,7 +30,7 @@
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35()) {
+	if (!cpu_is_mx35() && !cpu_is_mx25()) {
 		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
 		if (IS_ERR(mxc_ahb_clk))
 			return PTR_ERR(mxc_ahb_clk);
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 4b0e4a0..d1af253 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -392,6 +392,17 @@
 	if (unlikely(ret < 0))
 		return ret;
 
+	/* After previous do_configs there may be some invalid
+	 * pointers in c->interface array.  This happens every time
+	 * a user space function with fewer interfaces than a user
+	 * space function that was run before the new one is run.  The
+	 * compasit's set_config() assumes that if there is no more
+	 * then MAX_CONFIG_INTERFACES interfaces in a configuration
+	 * then there is a NULL pointer after the last interface in
+	 * c->interface array.  We need to make sure this is true. */
+	if (c->next_interface_id < ARRAY_SIZE(c->interface))
+		c->interface[c->next_interface_id] = NULL;
+
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 8b960de..c3caf1a 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -537,35 +537,35 @@
 /*-------------------------------------------------------------------------*/
 static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
 {
-	return inw((unsigned long)m66592->reg + offset);
+	return ioread16(m66592->reg + offset);
 }
 
 static inline void m66592_read_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		len = (len + 3) / 4;
-		insl(fifoaddr, buf, len);
+		ioread32_rep(fifoaddr, buf, len);
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void m66592_write(struct m66592 *m66592, u16 val,
 				unsigned long offset)
 {
-	outw(val, (unsigned long)m66592->reg + offset);
+	iowrite16(val, m66592->reg + offset);
 }
 
 static inline void m66592_write_fifo(struct m66592 *m66592,
 		unsigned long offset,
 		void *buf, unsigned long len)
 {
-	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + offset;
 
 	if (m66592->pdata->on_chip) {
 		unsigned long count;
@@ -573,25 +573,25 @@
 		int i;
 
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
-					outb(pb[i], fifoaddr + (3 - i));
+					iowrite8(pb[i], fifoaddr + (3 - i));
 				else
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 			}
 		}
 	} else {
 		unsigned long odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		iowrite16_rep(fifoaddr, buf, len);
 		if (odd) {
 			unsigned char *p = buf + len*2;
-			outb(*p, fifoaddr);
+			iowrite8(*p, fifoaddr);
 		}
 	}
 }
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 43abf55..4c3ac5c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -82,7 +82,7 @@
 struct printer_dev {
 	spinlock_t		lock;		/* lock this structure */
 	/* lock buffer lists during read/write calls */
-	spinlock_t		lock_printer_io;
+	struct mutex		lock_printer_io;
 	struct usb_gadget	*gadget;
 	struct usb_request	*req;		/* for control responses */
 	u8			config;
@@ -567,7 +567,7 @@
 
 	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* We will use this flag later to check if a printer reset happened
@@ -601,7 +601,7 @@
 		 * call or not.
 		 */
 		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -648,7 +648,7 @@
 		if (dev->reset_printer) {
 			list_add(&current_rx_req->list, &dev->rx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -673,7 +673,7 @@
 	dev->current_rx_buf = current_rx_buf;
 
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
 
@@ -697,7 +697,7 @@
 	if (len == 0)
 		return -EINVAL;
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* Check if a printer reset happens while we have interrupts on */
@@ -713,7 +713,7 @@
 		 * a NON-Blocking call or not.
 		 */
 		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -752,7 +752,7 @@
 
 		if (copy_from_user(req->buf, buf, size)) {
 			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return bytes_copied;
 		}
 
@@ -766,14 +766,14 @@
 		if (dev->reset_printer) {
 			list_add(&req->list, &dev->tx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
 		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
 			list_add(&req->list, &dev->tx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
-			spin_unlock(&dev->lock_printer_io);
+			mutex_unlock(&dev->lock_printer_io);
 			return -EAGAIN;
 		}
 
@@ -782,7 +782,7 @@
 	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
 
@@ -820,11 +820,11 @@
 	unsigned long		flags;
 	int			status = 0;
 
-	spin_lock(&dev->lock_printer_io);
+	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 	setup_rx_reqs(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);
-	spin_unlock(&dev->lock_printer_io);
+	mutex_unlock(&dev->lock_printer_io);
 
 	poll_wait(fd, &dev->rx_wait, wait);
 	poll_wait(fd, &dev->tx_wait, wait);
@@ -1461,7 +1461,7 @@
 	}
 
 	spin_lock_init(&dev->lock);
-	spin_lock_init(&dev->lock_printer_io);
+	mutex_init(&dev->lock_printer_io);
 	INIT_LIST_HEAD(&dev->tx_reqs);
 	INIT_LIST_HEAD(&dev->tx_reqs_active);
 	INIT_LIST_HEAD(&dev->rx_reqs);
@@ -1594,7 +1594,7 @@
 {
 	int status;
 
-	spin_lock(&usb_printer_gadget.lock_printer_io);
+	mutex_lock(&usb_printer_gadget.lock_printer_io);
 	class_destroy(usb_gadget_class);
 	unregister_chrdev_region(g_printer_devno, 2);
 
@@ -1602,6 +1602,6 @@
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	spin_unlock(&usb_printer_gadget.lock_printer_io);
+	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d89..9807624 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@
 		udc_disable(udc);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()   do {} while (0)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 888d8f1..70a8178 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1500,7 +1500,7 @@
 	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
 
 	del_timer_sync(&r8a66597->timer);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 #ifdef CONFIG_HAVE_CLK
@@ -1578,7 +1578,7 @@
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
 	r8a66597->timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip) {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 9a537aa..f763b51 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -91,7 +91,7 @@
 
 struct r8a66597 {
 	spinlock_t		lock;
-	unsigned long		reg;
+	void __iomem		*reg;
 
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
@@ -127,7 +127,7 @@
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
@@ -135,7 +135,7 @@
 				      unsigned char *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned int data;
 	int i;
 
@@ -144,7 +144,7 @@
 
 		/* aligned buf case */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			insl(fifoaddr, buf, len / 4);
+			ioread32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
@@ -152,7 +152,7 @@
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x03))
-				data = inl(fifoaddr);
+				data = ioread32(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 		}
@@ -161,7 +161,7 @@
 
 		/* aligned buf case */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			insw(fifoaddr, buf, len / 2);
+			ioread16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -169,7 +169,7 @@
 		/* unaligned buf case */
 		for (i = 0; i < len; i++) {
 			if (!(i & 0x01))
-				data = inw(fifoaddr);
+				data = ioread16(fifoaddr);
 
 			buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
 		}
@@ -179,7 +179,7 @@
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
@@ -187,21 +187,21 @@
 				       unsigned char *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	int adj = 0;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		/* 32-bit access only if buf is 32-bit aligned */
 		if (len >= 4 && !((unsigned long)buf & 0x03)) {
-			outsl(fifoaddr, buf, len / 4);
+			iowrite32_rep(fifoaddr, buf, len / 4);
 			buf += len & ~0x03;
 			len &= 0x03;
 		}
 	} else {
 		/* 16-bit access only if buf is 16-bit aligned */
 		if (len >= 2 && !((unsigned long)buf & 0x01)) {
-			outsw(fifoaddr, buf, len / 2);
+			iowrite16_rep(fifoaddr, buf, len / 2);
 			buf += len & ~0x01;
 			len &= 0x01;
 		}
@@ -216,7 +216,7 @@
 	}
 
 	for (i = 0; i < len; i++)
-		outb(buf[i], fifoaddr + adj - (i & adj));
+		iowrite8(buf[i], fifoaddr + adj - (i & adj));
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1f73b48..26193ec 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -297,6 +297,12 @@
  */
 static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 {
+	unsigned int ep;
+	unsigned int addr;
+	unsigned int size;
+	int timeout;
+	u32 val;
+
 	/* the ryu 2.6.24 release ahs
 	   writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
 	   writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
@@ -310,6 +316,51 @@
 	writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
 	       S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
 	       hsotg->regs + S3C_GNPTXFSIZ);
+
+	/* arange all the rest of the TX FIFOs, as some versions of this
+	 * block have overlapping default addresses. This also ensures
+	 * that if the settings have been changed, then they are set to
+	 * known values. */
+
+	/* start at the end of the GNPTXFSIZ, rounded up */
+	addr = 2048 + 1024;
+	size = 768;
+
+	/* currently we allocate TX FIFOs for all possible endpoints,
+	 * and assume that they are all the same size. */
+
+	for (ep = 0; ep <= 15; ep++) {
+		val = addr;
+		val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
+		addr += size;
+
+		writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
+	}
+
+	/* according to p428 of the design guide, we need to ensure that
+	 * all fifos are flushed before continuing */
+
+	writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
+	       S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
+
+	/* wait until the fifos are both flushed */
+	timeout = 100;
+	while (1) {
+		val = readl(hsotg->regs + S3C_GRSTCTL);
+
+		if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
+			break;
+
+		if (--timeout == 0) {
+			dev_err(hsotg->dev,
+				"%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+				__func__, val);
+		}
+
+		udelay(1);
+	}
+
+	dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
 }
 
 /**
@@ -2574,6 +2625,9 @@
 	writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
 	       hsotg->regs + S3C_DCTL);
 
+	/* must be at-least 3ms to allow bus to see disconnect */
+	msleep(3);
+
 	/* remove the soft-disconnect and let's go */
 	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
 
@@ -2730,6 +2784,9 @@
 
 	writel(0, hsotg->regs + S3C_DAINTMSK);
 
+	/* Be in disconnected state until gadget is registered */
+	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
 	if (0) {
 		/* post global nak until we're ready */
 		writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d5f4c1d..ea2b3c7 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@
 	else
 		dev->ep0state = EP0_OUT_DATA_PHASE;
 
+	if (!dev->driver)
+		return;
+
+	/* deliver the request to the gadget driver */
 	ret = dev->driver->setup(&dev->gadget, crq);
 	if (ret < 0) {
 		if (dev->req_config) {
@@ -1700,9 +1704,13 @@
 	if (!driver || driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
-	dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
+	dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
 		driver->driver.name);
 
+	/* report disconnect */
+	if (driver->disconnect)
+		driver->disconnect(&udc->gadget);
+
 	driver->unbind(&udc->gadget);
 
 	device_del(&udc->gadget.dev);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 16bdf77..3e8dcb5 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -536,17 +536,11 @@
 		list_move(&req->list, &port->read_pool);
 	}
 
-	/* Push from tty to ldisc; this is immediate with low_latency, and
-	 * may trigger callbacks to this driver ... so drop the spinlock.
+	/* Push from tty to ldisc; without low_latency set this is handled by
+	 * a workqueue, so we won't get callbacks and can hold port_lock
 	 */
 	if (tty && do_push) {
-		spin_unlock_irq(&port->port_lock);
 		tty_flip_buffer_push(tty);
-		wake_up_interruptible(&tty->read_wait);
-		spin_lock_irq(&port->port_lock);
-
-		/* tty may have been closed */
-		tty = port->port_tty;
 	}
 
 
@@ -784,11 +778,6 @@
 	port->open_count = 1;
 	port->openclose = false;
 
-	/* low_latency means ldiscs work in tasklet context, without
-	 * needing a workqueue schedule ... easier to keep up.
-	 */
-	tty->low_latency = 1;
-
 	/* if connected, start the I/O stream */
 	if (port->port_usb) {
 		struct gserial	*gser = port->port_usb;
@@ -1195,6 +1184,7 @@
 	n_ports = 0;
 
 	tty_unregister_driver(gs_tty_driver);
+	put_tty_driver(gs_tty_driver);
 	gs_tty_driver = NULL;
 
 	pr_debug("%s: cleaned up ttyGS* support\n", __func__);
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 0a705e6..e92454c 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -107,11 +107,11 @@
 #define UVC_WARN_MINMAX				0
 #define UVC_WARN_PROBE_DEF			1
 
-extern unsigned int uvc_trace_param;
+extern unsigned int uvc_gadget_trace_param;
 
 #define uvc_trace(flag, msg...) \
 	do { \
-		if (uvc_trace_param & flag) \
+		if (uvc_gadget_trace_param & flag) \
 			printk(KERN_DEBUG "uvcvideo: " msg); \
 	} while (0)
 
@@ -220,16 +220,10 @@
 #define to_uvc_file_handle(handle) \
 	container_of(handle, struct uvc_file_handle, vfh)
 
-extern struct v4l2_file_operations uvc_v4l2_fops;
-
 /* ------------------------------------------------------------------------
  * Functions
  */
 
-extern int uvc_video_enable(struct uvc_video *video, int enable);
-extern int uvc_video_init(struct uvc_video *video);
-extern int uvc_video_pump(struct uvc_video *video);
-
 extern void uvc_endpoint_stream(struct uvc_device *dev);
 
 extern void uvc_function_connect(struct uvc_device *uvc);
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 4389199..f7395ac 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -78,7 +78,8 @@
  *
  */
 
-void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+static void
+uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 {
 	mutex_init(&queue->mutex);
 	spin_lock_init(&queue->irqlock);
@@ -88,6 +89,28 @@
 }
 
 /*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	unsigned int i;
+
+	for (i = 0; i < queue->count; ++i) {
+		if (queue->buffer[i].vma_use_count != 0)
+			return -EBUSY;
+	}
+
+	if (queue->count) {
+		vfree(queue->mem);
+		queue->count = 0;
+	}
+
+	return 0;
+}
+
+/*
  * Allocate the video buffers.
  *
  * Pages are reserved to make sure they will not be swapped, as they will be
@@ -95,8 +118,9 @@
  *
  * Buffers will be individually mapped, so they must all be page aligned.
  */
-int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
-		unsigned int buflength)
+static int
+uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+		  unsigned int buflength)
 {
 	unsigned int bufsize = PAGE_ALIGN(buflength);
 	unsigned int i;
@@ -150,28 +174,6 @@
 	return ret;
 }
 
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
-	unsigned int i;
-
-	for (i = 0; i < queue->count; ++i) {
-		if (queue->buffer[i].vma_use_count != 0)
-			return -EBUSY;
-	}
-
-	if (queue->count) {
-		vfree(queue->mem);
-		queue->count = 0;
-	}
-
-	return 0;
-}
-
 static void __uvc_query_buffer(struct uvc_buffer *buf,
 		struct v4l2_buffer *v4l2_buf)
 {
@@ -195,8 +197,8 @@
 	}
 }
 
-int uvc_query_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf)
+static int
+uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
 {
 	int ret = 0;
 
@@ -217,8 +219,8 @@
  * Queue a video buffer. Attempting to queue a buffer that has already been
  * queued will return -EINVAL.
  */
-int uvc_queue_buffer(struct uvc_video_queue *queue,
-	struct v4l2_buffer *v4l2_buf)
+static int
+uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf)
 {
 	struct uvc_buffer *buf;
 	unsigned long flags;
@@ -298,8 +300,9 @@
  * Dequeue a video buffer. If nonblocking is false, block until a buffer is
  * available.
  */
-int uvc_dequeue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf, int nonblocking)
+static int
+uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf,
+		   int nonblocking)
 {
 	struct uvc_buffer *buf;
 	int ret = 0;
@@ -359,8 +362,9 @@
  * This function implements video queue polling and is intended to be used by
  * the device poll handler.
  */
-unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
-		poll_table *wait)
+static unsigned int
+uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+	       poll_table *wait)
 {
 	struct uvc_buffer *buf;
 	unsigned int mask = 0;
@@ -407,7 +411,8 @@
  * This function implements video buffer memory mapping and is intended to be
  * used by the device mmap handler.
  */
-int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+static int
+uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
 {
 	struct uvc_buffer *uninitialized_var(buffer);
 	struct page *page;
@@ -458,6 +463,42 @@
 }
 
 /*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and removes them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+	struct uvc_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	while (!list_empty(&queue->irqqueue)) {
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+		list_del(&buf->queue);
+		buf->state = UVC_BUF_STATE_ERROR;
+		wake_up(&buf->wait);
+	}
+	/* This must be protected by the irqlock spinlock to avoid race
+	 * conditions between uvc_queue_buffer and the disconnection event that
+	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+	 * state outside the queue code.
+	 */
+	if (disconnect)
+		queue->flags |= UVC_QUEUE_DISCONNECTED;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+/*
  * Enable or disable the video buffers queue.
  *
  * The queue must be enabled before starting video acquisition and must be
@@ -474,7 +515,7 @@
  * This function can't be called from interrupt context. Use
  * uvc_queue_cancel() instead.
  */
-int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
 {
 	unsigned int i;
 	int ret = 0;
@@ -503,44 +544,8 @@
 	return ret;
 }
 
-/*
- * Cancel the video buffers queue.
- *
- * Cancelling the queue marks all buffers on the irq queue as erroneous,
- * wakes them up and removes them from the queue.
- *
- * If the disconnect parameter is set, further calls to uvc_queue_buffer will
- * fail with -ENODEV.
- *
- * This function acquires the irq spinlock and can be called from interrupt
- * context.
- */
-void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
-{
-	struct uvc_buffer *buf;
-	unsigned long flags;
-
-	spin_lock_irqsave(&queue->irqlock, flags);
-	while (!list_empty(&queue->irqqueue)) {
-		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
-				       queue);
-		list_del(&buf->queue);
-		buf->state = UVC_BUF_STATE_ERROR;
-		wake_up(&buf->wait);
-	}
-	/* This must be protected by the irqlock spinlock to avoid race
-	 * conditions between uvc_queue_buffer and the disconnection event that
-	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
-	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
-	 * state outside the queue code.
-	 */
-	if (disconnect)
-		queue->flags |= UVC_QUEUE_DISCONNECTED;
-	spin_unlock_irqrestore(&queue->irqlock, flags);
-}
-
-struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
-		struct uvc_buffer *buf)
+static struct uvc_buffer *
+uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
 	unsigned long flags;
@@ -568,7 +573,7 @@
 	return nextbuf;
 }
 
-struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
+static struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
 {
 	struct uvc_buffer *buf = NULL;
 
diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h
index 7f5a33f..1812a8e 100644
--- a/drivers/usb/gadget/uvc_queue.h
+++ b/drivers/usb/gadget/uvc_queue.h
@@ -58,30 +58,10 @@
 	struct list_head irqqueue;
 };
 
-extern void uvc_queue_init(struct uvc_video_queue *queue,
-		enum v4l2_buf_type type);
-extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
-		unsigned int nbuffers, unsigned int buflength);
-extern int uvc_free_buffers(struct uvc_video_queue *queue);
-extern int uvc_query_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf);
-extern int uvc_queue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf);
-extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
-		struct v4l2_buffer *v4l2_buf, int nonblocking);
-extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
-extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
-extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
-		struct uvc_buffer *buf);
-extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
-		struct file *file, poll_table *wait);
-extern int uvc_queue_mmap(struct uvc_video_queue *queue,
-		struct vm_area_struct *vma);
 static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 {
 	return queue->flags & UVC_QUEUE_STREAMING;
 }
-extern struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue);
 
 #endif /* __KERNEL__ */
 
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index a7989f2..2dcffda 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -363,7 +363,7 @@
 	return mask;
 }
 
-struct v4l2_file_operations uvc_v4l2_fops = {
+static struct v4l2_file_operations uvc_v4l2_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uvc_v4l2_open,
 	.release	= uvc_v4l2_release,
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index de8cbc4..b08f354 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -271,7 +271,7 @@
  * This function fills the available USB requests (listed in req_free) with
  * video data from the queued buffers.
  */
-int
+static int
 uvc_video_pump(struct uvc_video *video)
 {
 	struct usb_request *req;
@@ -328,7 +328,7 @@
 /*
  * Enable or disable the video stream.
  */
-int
+static int
 uvc_video_enable(struct uvc_video *video, int enable)
 {
 	unsigned int i;
@@ -367,7 +367,7 @@
 /*
  * Initialize the UVC video stream.
  */
-int
+static int
 uvc_video_init(struct uvc_video *video)
 {
 	INIT_LIST_HEAD(&video->req_free);
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 417fd68..f5f3030 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -28,10 +28,10 @@
 #include "config.c"
 #include "epautoconf.c"
 
-#include "f_uvc.c"
 #include "uvc_queue.c"
-#include "uvc_v4l2.c"
 #include "uvc_video.c"
+#include "uvc_v4l2.c"
+#include "f_uvc.c"
 
 /* --------------------------------------------------------------------------
  * Device descriptor
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ef3e88f..a3ef2a9 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1135,7 +1135,7 @@
 
 #ifdef CONFIG_XPS_USB_HCD_XILINX
 #include "ehci-xilinx-of.c"
-#define OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
+#define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
 #endif
 
 #ifdef CONFIG_PLAT_ORION
@@ -1159,7 +1159,8 @@
 #endif
 
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+    !defined(XILINX_OF_PLATFORM_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -1213,10 +1214,20 @@
 	if (retval < 0)
 		goto clean3;
 #endif
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	retval = of_register_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean4;
+#endif
 	return retval;
 
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	/* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */
+clean4:
+#endif
 #ifdef OF_PLATFORM_DRIVER
-	/* of_unregister_platform_driver(&OF_PLATFORM_DRIVER); */
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
 clean3:
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
@@ -1243,6 +1254,9 @@
 
 static void __exit ehci_hcd_cleanup(void)
 {
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+#endif
 #ifdef OF_PLATFORM_DRIVER
 	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
 #endif
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 544ccfd..a8ad8ac 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -182,7 +182,7 @@
 	}
 	clk_enable(priv->usbclk);
 
-	if (!cpu_is_mx35()) {
+	if (!cpu_is_mx35() && !cpu_is_mx25()) {
 		priv->ahbclk = clk_get(dev, "usb_ahb");
 		if (IS_ERR(priv->ahbclk)) {
 			ret = PTR_ERR(priv->ahbclk);
@@ -207,10 +207,17 @@
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
-		if (otg_init(pdata->otg) != 0)
-			dev_err(dev, "unable to init transceiver\n");
-		else if (otg_set_vbus(pdata->otg, 1) != 0)
+		ret = otg_init(pdata->otg);
+		if (ret) {
+			dev_err(dev, "unable to init transceiver, probably missing\n");
+			ret = -ENODEV;
+			goto err_add;
+		}
+		ret = otg_set_vbus(pdata->otg, 1);
+		if (ret) {
 			dev_err(dev, "unable to enable vbus on transceiver\n");
+			goto err_add;
+		}
 	}
 
 	priv->hcd = hcd;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 20a0dfe0..0587ad4 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2224,12 +2224,9 @@
 
 /*-------------------------------------------------------------------------*/
 
-static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
 {
 	int tmp = 20;
-	unsigned long flags;
-
-	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 
 	isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
 	isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
@@ -2240,6 +2237,14 @@
 	}
 	if (!tmp)
 		pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp1362_hcd->lock, flags);
+	__isp1362_sw_reset(isp1362_hcd);
 	spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
 }
 
@@ -2418,7 +2423,7 @@
 	if (isp1362_hcd->board && isp1362_hcd->board->reset)
 		isp1362_hcd->board->reset(hcd->self.controller, 1);
 	else
-		isp1362_sw_reset(isp1362_hcd);
+		__isp1362_sw_reset(isp1362_hcd);
 
 	if (isp1362_hcd->board && isp1362_hcd->board->clock)
 		isp1362_hcd->board->clock(hcd->self.controller, 0);
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index 5151516..d995351 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -65,7 +65,7 @@
 	unsigned short *bp = (unsigned short *)buf;
 	while (len--) {
 		DUMMY_DELAY_ACCESS;
-		*bp++ = inw((void *)addr);
+		*bp++ = inw(addr);
 	}
 }
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debd..4181638 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@
 	__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()	do {} while (0)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 6db57ab..77be3c2 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1065,7 +1065,7 @@
 	else if (speed == LSMODE)
 		rh->port |= USB_PORT_STAT_LOW_SPEED;
 
-	rh->port &= USB_PORT_STAT_RESET;
+	rh->port &= ~USB_PORT_STAT_RESET;
 	rh->port |= USB_PORT_STAT_ENABLE;
 }
 
@@ -2404,7 +2404,7 @@
 
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
-	iounmap((void *)r8a66597->reg);
+	iounmap(r8a66597->reg);
 #ifdef CONFIG_HAVE_CLK
 	if (r8a66597->pdata->on_chip)
 		clk_put(r8a66597->clk);
@@ -2496,7 +2496,7 @@
 	init_timer(&r8a66597->rh_timer);
 	r8a66597->rh_timer.function = r8a66597_timer;
 	r8a66597->rh_timer.data = (unsigned long)r8a66597;
-	r8a66597->reg = (unsigned long)reg;
+	r8a66597->reg = reg;
 
 	/* make sure no interrupts are pending */
 	ret = r8a66597_clock_enable(r8a66597);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 228e3fb..95d0f5a 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -112,7 +112,7 @@
 
 struct r8a66597 {
 	spinlock_t lock;
-	unsigned long reg;
+	void __iomem *reg;
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
@@ -170,67 +170,67 @@
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
-	return inw(r8a66597->reg + offset);
+	return ioread16(r8a66597->reg + offset);
 }
 
 static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		insl(fifoaddr, buf, count);
+		ioread32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
-			unsigned long tmp = inl(fifoaddr);
+			unsigned long tmp = ioread32(fifoaddr);
 			memcpy((unsigned char *)buf + count * 4, &tmp,
 			       len & 0x03);
 		}
 	} else {
 		len = (len + 1) / 2;
-		insw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 	}
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 				  unsigned long offset)
 {
-	outw(val, r8a66597->reg + offset);
+	iowrite16(val, r8a66597->reg + offset);
 }
 
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       unsigned long offset, u16 *buf,
 				       int len)
 {
-	unsigned long fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
 	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
-		outsl(fifoaddr, buf, count);
+		iowrite32_rep(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			pb = (unsigned char *)buf + count * 4;
 			for (i = 0; i < (len & 0x00000003); i++) {
 				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-					outb(pb[i], fifoaddr + i);
+					iowrite8(pb[i], fifoaddr + i);
 				else
-					outb(pb[i], fifoaddr + 3 - i);
+					iowrite8(pb[i], fifoaddr + 3 - i);
 			}
 		}
 	} else {
 		int odd = len & 0x0001;
 
 		len = len / 2;
-		outsw(fifoaddr, buf, len);
+		ioread16_rep(fifoaddr, buf, len);
 		if (unlikely(odd)) {
 			buf = &buf[len];
-			outb((unsigned char)*buf, fifoaddr);
+			iowrite8((unsigned char)*buf, fifoaddr);
 		}
 	}
 }
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03a..2eb658d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@
 	return 0;
 }
 
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct xhci_ring	*ep_ring;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+	ep_ring = virt_dev->eps[0].ring;
+	/*
+	 * FIXME we don't keep track of the dequeue pointer very well after a
+	 * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+	 * host to our enqueue pointer.  This should only be called after a
+	 * configured device has reset, so all control transfers should have
+	 * been completed or cancelled before the reset.
+	 */
+	ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+	ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
@@ -1002,7 +1023,7 @@
 	return EP_INTERVAL(interval);
 }
 
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
  * High speed endpoint descriptors can define "the number of additional
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
@@ -1010,7 +1031,8 @@
 static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
-	if (udev->speed != USB_SPEED_SUPER)
+	if (udev->speed != USB_SPEED_SUPER ||
+			!usb_endpoint_xfer_isoc(&ep->desc))
 		return 0;
 	return ep->ss_ep_comp.bmAttributes;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index edffd81..11482b6 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -78,6 +78,8 @@
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_NEC)
+		xhci->quirks |= XHCI_NEC_HOST;
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 36c858e..bfc99a9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -182,8 +182,12 @@
  * set, but other sections talk about dealing with the chain bit set.  This was
  * fixed in the 0.96 specification errata, but we have to assume that all 0.95
  * xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
  */
-static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		bool consumer, bool more_trbs_coming)
 {
 	u32 chain;
 	union xhci_trb *next;
@@ -199,15 +203,28 @@
 	while (last_trb(xhci, ring, ring->enq_seg, next)) {
 		if (!consumer) {
 			if (ring != xhci->event_ring) {
-				if (chain) {
-					next->link.control |= TRB_CHAIN;
-
-					/* Give this link TRB to the hardware */
-					wmb();
-					next->link.control ^= TRB_CYCLE;
-				} else {
+				/*
+				 * If the caller doesn't plan on enqueueing more
+				 * TDs before ringing the doorbell, then we
+				 * don't want to give the link TRB to the
+				 * hardware just yet.  We'll give the link TRB
+				 * back in prepare_ring() just before we enqueue
+				 * the TD at the top of the ring.
+				 */
+				if (!chain && !more_trbs_coming)
 					break;
+
+				/* If we're not dealing with 0.95 hardware,
+				 * carry over the chain bit of the previous TRB
+				 * (which may mean the chain bit is cleared).
+				 */
+				if (!xhci_link_trb_quirk(xhci)) {
+					next->link.control &= ~TRB_CHAIN;
+					next->link.control |= chain;
 				}
+				/* Give this link TRB to the hardware */
+				wmb();
+				next->link.control ^= TRB_CYCLE;
 			}
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
@@ -1071,6 +1088,15 @@
 			xhci_warn(xhci, "Reset device command completion "
 					"for disabled slot %u\n", slot_id);
 		break;
+	case TRB_TYPE(TRB_NEC_GET_FW):
+		if (!(xhci->quirks & XHCI_NEC_HOST)) {
+			xhci->error_bitmask |= 1 << 6;
+			break;
+		}
+		xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
+				NEC_FW_MAJOR(event->status),
+				NEC_FW_MINOR(event->status));
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -1079,6 +1105,17 @@
 	inc_deq(xhci, xhci->cmd_ring, false);
 }
 
+static void handle_vendor_event(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 trb_type;
+
+	trb_type = TRB_FIELD_TO_TYPE(event->generic.field[3]);
+	xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
+	if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
+		handle_cmd_completion(xhci, &event->event_cmd);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
@@ -1659,7 +1696,10 @@
 			update_ptrs = 0;
 		break;
 	default:
-		xhci->error_bitmask |= 1 << 3;
+		if ((event->event_cmd.flags & TRB_TYPE_BITMASK) >= TRB_TYPE(48))
+			handle_vendor_event(xhci, event);
+		else
+			xhci->error_bitmask |= 1 << 3;
 	}
 	/* Any of the above functions may drop and re-acquire the lock, so check
 	 * to make sure a watchdog timer didn't mark the host as non-responsive.
@@ -1684,9 +1724,12 @@
 /*
  * Generic function for queueing a TRB on a ring.
  * The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming:	Will you enqueue more TRBs before calling
+ *			prepare_transfer()?
  */
 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer,
+		bool consumer, bool more_trbs_coming,
 		u32 field1, u32 field2, u32 field3, u32 field4)
 {
 	struct xhci_generic_trb *trb;
@@ -1696,7 +1739,7 @@
 	trb->field[1] = field2;
 	trb->field[2] = field3;
 	trb->field[3] = field4;
-	inc_enq(xhci, ring, consumer);
+	inc_enq(xhci, ring, consumer, more_trbs_coming);
 }
 
 /*
@@ -1965,6 +2008,7 @@
 	int trb_buff_len, this_sg_len, running_total;
 	bool first_trb;
 	u64 addr;
+	bool more_trbs_coming;
 
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
@@ -2050,7 +2094,11 @@
 		length_field = TRB_LEN(trb_buff_len) |
 			remainder |
 			TRB_INTR_TARGET(0);
-		queue_trb(xhci, ep_ring, false,
+		if (num_trbs > 1)
+			more_trbs_coming = true;
+		else
+			more_trbs_coming = false;
+		queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2101,6 +2149,7 @@
 	int num_trbs;
 	struct xhci_generic_trb *start_trb;
 	bool first_trb;
+	bool more_trbs_coming;
 	int start_cycle;
 	u32 field, length_field;
 
@@ -2189,7 +2238,11 @@
 		length_field = TRB_LEN(trb_buff_len) |
 			remainder |
 			TRB_INTR_TARGET(0);
-		queue_trb(xhci, ep_ring, false,
+		if (num_trbs > 1)
+			more_trbs_coming = true;
+		else
+			more_trbs_coming = false;
+		queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2268,7 +2321,7 @@
 	/* Queue setup TRB - see section 6.4.1.2.1 */
 	/* FIXME better way to translate setup_packet into two u32 fields? */
 	setup = (struct usb_ctrlrequest *) urb->setup_packet;
-	queue_trb(xhci, ep_ring, false,
+	queue_trb(xhci, ep_ring, false, true,
 			/* FIXME endianness is probably going to bite my ass here. */
 			setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
 			setup->wIndex | setup->wLength << 16,
@@ -2284,7 +2337,7 @@
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
-		queue_trb(xhci, ep_ring, false,
+		queue_trb(xhci, ep_ring, false, true,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
 				length_field,
@@ -2301,7 +2354,7 @@
 		field = 0;
 	else
 		field = TRB_DIR_IN;
-	queue_trb(xhci, ep_ring, false,
+	queue_trb(xhci, ep_ring, false, false,
 			0,
 			0,
 			TRB_INTR_TARGET(0),
@@ -2327,18 +2380,21 @@
 		u32 field3, u32 field4, bool command_must_succeed)
 {
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+	int ret;
+
 	if (!command_must_succeed)
 		reserved_trbs++;
 
-	if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
-		if (!in_interrupt())
-			xhci_err(xhci, "ERR: No room for command on command ring\n");
+	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+			reserved_trbs, GFP_ATOMIC);
+	if (ret < 0) {
+		xhci_err(xhci, "ERR: No room for command on command ring\n");
 		if (command_must_succeed)
 			xhci_err(xhci, "ERR: Reserved TRB counting for "
 					"unfailable commands failed.\n");
-		return -ENOMEM;
+		return ret;
 	}
-	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+	queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
 			field4 | xhci->cmd_ring->cycle_state);
 	return 0;
 }
@@ -2378,6 +2434,12 @@
 			false);
 }
 
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+		u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	return queue_command(xhci, field1, field2, field3, field4, false);
+}
+
 /* Queue a reset device command TRB */
 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
 {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 40e0a0c..3998f72 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,33 @@
 }
 
 /*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	int ret;
+
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	temp |= (CMD_RUN);
+	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+			temp);
+	xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+	/*
+	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
+	 * running.
+	 */
+	ret = handshake(xhci, &xhci->op_regs->status,
+			STS_HALT, 0, XHCI_MAX_HALT_USEC);
+	if (ret == -ETIMEDOUT)
+		xhci_err(xhci, "Host took too long to start, "
+				"waited %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
+	return ret;
+}
+
+/*
  * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
  *
  * This resets pipelines, timers, counters, state machines, etc.
@@ -116,6 +143,7 @@
 {
 	u32 command;
 	u32 state;
+	int ret;
 
 	state = xhci_readl(xhci, &xhci->op_regs->status);
 	if ((state & STS_HALT) == 0) {
@@ -130,7 +158,17 @@
 	/* XXX: Why does EHCI set this here?  Shouldn't other code do this? */
 	xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 
-	return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+	ret = handshake(xhci, &xhci->op_regs->command,
+			CMD_RESET, 0, 250 * 1000);
+	if (ret)
+		return ret;
+
+	xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n");
+	/*
+	 * xHCI cannot write to any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
 
@@ -448,17 +486,20 @@
 
 	if (NUM_TEST_NOOPS > 0)
 		doorbell = xhci_setup_one_noop(xhci);
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_queue_vendor_command(xhci, 0, 0, 0,
+				TRB_TYPE(TRB_NEC_GET_FW));
 
-	temp = xhci_readl(xhci, &xhci->op_regs->command);
-	temp |= (CMD_RUN);
-	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
-			temp);
-	xhci_writel(xhci, temp, &xhci->op_regs->command);
-	/* Flush PCI posted writes */
-	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	if (xhci_start(xhci)) {
+		xhci_halt(xhci);
+		return -ENODEV;
+	}
+
 	xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
 	if (doorbell)
 		(*doorbell)(xhci);
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_ring_cmd_db(xhci);
 
 	xhci_dbg(xhci, "Finished xhci_run\n");
 	return 0;
@@ -2093,6 +2134,8 @@
 	/* If this is a Set Address to an unconfigured device, setup ep 0 */
 	if (!udev->config)
 		xhci_setup_addressable_virt_dev(xhci, udev);
+	else
+		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
 	/* Otherwise, assume the core has the device configured how it wants */
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dada2fb..6c7e343 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -925,6 +925,7 @@
 /* TRB bit mask */
 #define	TRB_TYPE_BITMASK	(0xfc00)
 #define TRB_TYPE(p)		((p) << 10)
+#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
 /* TRB type IDs */
 /* bulk, interrupt, isoc scatter/gather, and control data stage */
 #define TRB_NORMAL		1
@@ -992,6 +993,14 @@
 #define TRB_MFINDEX_WRAP	39
 /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
 
+/* Nec vendor-specific command completion event. */
+#define	TRB_NEC_CMD_COMP	48
+/* Get NEC firmware revision. */
+#define	TRB_NEC_GET_FW		49
+
+#define NEC_FW_MINOR(p)		(((p) >> 0) & 0xff)
+#define NEC_FW_MAJOR(p)		(((p) >> 8) & 0xff)
+
 /*
  * TRBS_PER_SEGMENT must be a multiple of 4,
  * since the command ring is 64-byte aligned.
@@ -1172,6 +1181,7 @@
 	unsigned int		quirks;
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
+#define XHCI_NEC_HOST		(1 << 2)
 };
 
 /* For testing purposes */
@@ -1282,6 +1292,8 @@
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
@@ -1379,6 +1391,8 @@
 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_vendor_command(struct xhci_hcd *xhci,
+		u32 field1, u32 field2, u32 field3, u32 field4);
 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d9303..d25814c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@
 	}
 
 	if (!sisusb->devinit) {
-		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+		    sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
 			if (sisusb_init_gfxdevice(sisusb, 0)) {
 				mutex_unlock(&sisusb->lock);
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@
 
 	sisusb->present = 1;
 
-	if (dev->speed == USB_SPEED_HIGH) {
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
 		int initscreen = 1;
 #ifdef INCL_SISUSB_CON
 		if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fad70bc..3b795c5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -219,8 +219,8 @@
 	return 0;
 }
 #else
-#define musb_ulpi_read(a, b)		NULL
-#define musb_ulpi_write(a, b, c)	NULL
+#define musb_ulpi_read		NULL
+#define musb_ulpi_write		NULL
 #endif
 
 static struct otg_io_access_ops musb_ulpi_access = {
@@ -451,10 +451,6 @@
  * @param power
  */
 
-#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
-		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
-		| MUSB_INTR_RESET)
-
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl, u8 power)
 {
@@ -642,7 +638,7 @@
 		handled = IRQ_HANDLED;
 	}
 
-
+#endif
 	if (int_usb & MUSB_INTR_SUSPEND) {
 		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
 				otg_state_string(musb), devctl, power);
@@ -705,6 +701,7 @@
 		}
 	}
 
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
 		void __iomem *mbase = musb->mregs;
@@ -1597,7 +1594,7 @@
 	/* the core can interrupt us for multiple reasons; docs have
 	 * a generic interrupt flowchart to follow
 	 */
-	if (musb->int_usb & STAGE0_MASK)
+	if (musb->int_usb)
 		retval |= musb_stage0_irq(musb, musb->int_usb,
 				devctl, power);
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b22d02d..91d6779 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -470,7 +470,8 @@
 
 struct musb_context_registers {
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
 	u32 otg_sysconfig, otg_forcestandby;
 #endif
 	u8 power;
@@ -484,7 +485,8 @@
 	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
 };
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
 extern void musb_platform_save_context(struct musb *musb,
 		struct musb_context_registers *musb_context);
 extern void musb_platform_restore_context(struct musb *musb,
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 1008044..dc66e43 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -132,18 +132,9 @@
 	if (mode) {
 		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
 		BUG_ON(len < packet_sz);
-
-		if (packet_sz >= 64) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR16
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		} else if (packet_sz >= 32) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR8
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		} else if (packet_sz >= 16) {
-			csr |= MUSB_HSDMA_BURSTMODE_INCR4
-					<< MUSB_HSDMA_BURSTMODE_SHIFT;
-		}
 	}
+	csr |= MUSB_HSDMA_BURSTMODE_INCR16
+				<< MUSB_HSDMA_BURSTMODE_SHIFT;
 
 	csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
 		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f..3c48e77 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
 
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-#endif
-
 /*
  * Checks the revision. We need to use the DMA register as 3.0 does not
  * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index b1b3469..d331b22 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -59,12 +59,17 @@
 
 static int ulpi_init(struct otg_transceiver *otg)
 {
-	int i, vid, pid;
+	int i, vid, pid, ret;
+	u32 ulpi_id = 0;
 
-	vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_VENDOR_ID_LOW);
-	pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
+	for (i = 0; i < 4; i++) {
+		ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
+		if (ret < 0)
+			return ret;
+		ulpi_id = (ulpi_id << 8) | ret;
+	}
+	vid = ulpi_id & 0xffff;
+	pid = ulpi_id >> 16;
 
 	pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 3edda3e..fd35f73 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1239,8 +1239,7 @@
 
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
-		dev_err(&port->dev,
-			"%s: port or port->private is NULL, status=%d\n",
+		pr_err("%s: port or port->private is NULL, status=%d\n",
 			__func__, status);
 		return;
 	}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 050211a..e298dc4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -653,7 +653,6 @@
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
-	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
@@ -692,6 +691,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -738,6 +738,14 @@
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -2005,6 +2013,8 @@
 				"urb failed to set to rts/cts flow control\n");
 		}
 
+		/* raise DTR/RTS */
+		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/*
 		 * Xon/Xoff code
@@ -2052,6 +2062,8 @@
 			}
 		}
 
+		/* lower DTR/RTS */
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 	return;
 }
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 94d86c3..d01946d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -501,13 +501,6 @@
 #define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
 
 /*
- * Contec products (http://www.contec.com)
- * Submitted by Daniel Sangorrin
- */
-#define CONTEC_VID		0x06CE	/* Vendor ID */
-#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
-
-/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
@@ -703,6 +696,12 @@
 #define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
 
 /*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID			0x2100	/* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */
@@ -1024,3 +1023,12 @@
 #define MJSG_SR_RADIO_PID	0x9379
 #define MJSG_XM_RADIO_PID	0x937A
 #define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index f8424d1..585b7e6 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -730,7 +730,6 @@
 	mos7840_port = urb->context;
 	if (!mos7840_port) {
 		dbg("%s", "NULL mos7840_port pointer");
-		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8..5cd30e43 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@
 #define AMOI_PRODUCT_H01			0x0800
 #define AMOI_PRODUCT_H01A			0x7002
 #define AMOI_PRODUCT_H02			0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2		0x0407
 
 #define DELL_VENDOR_ID				0x413C
 
@@ -302,6 +303,7 @@
 #define QISDA_PRODUCT_H21_4512			0x4512
 #define QISDA_PRODUCT_H21_4523			0x4523
 #define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4518			0x4518
 #define QISDA_PRODUCT_H20_4519			0x4519
 
 /* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
 
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },		/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },		/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 04bb759..cde67cac 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@
 	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
 	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
@@ -139,6 +141,7 @@
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 			return retval;
 		}
@@ -155,6 +158,7 @@
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 			return retval;
 		}
@@ -163,6 +167,7 @@
 	default:
 		dev_err(&serial->dev->dev,
 			"unknown number of interfaces: %d\n", nintf);
+		kfree(data);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb0..d47b56e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
+	{ USB_DEVICE(0x1199, 0x0301) },	/* Sierra Wireless USB Dongle 250U */
 	/* Sierra Wireless C597 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
 	/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 4471642..64ec073 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@
 
 	/* fill the common fields in the URB */
 	us->current_urb->context = &urb_done;
-	us->current_urb->actual_length = 0;
-	us->current_urb->error_count = 0;
-	us->current_urb->status = 0;
+	us->current_urb->transfer_flags = 0;
 
 	/* we assume that if transfer_buffer isn't us->iobuf then it
 	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 0f41c91..d219070 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -98,7 +98,8 @@
 static void handle_tx(struct vhost_net *net)
 {
 	struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_TX];
-	unsigned head, out, in, s;
+	unsigned out, in, s;
+	int head;
 	struct msghdr msg = {
 		.msg_name = NULL,
 		.msg_namelen = 0,
@@ -135,6 +136,9 @@
 					 ARRAY_SIZE(vq->iov),
 					 &out, &in,
 					 NULL, NULL);
+		/* On error, stop handling until the next kick. */
+		if (unlikely(head < 0))
+			break;
 		/* Nothing new?  Wait for eventfd to tell us they refilled. */
 		if (head == vq->num) {
 			wmem = atomic_read(&sock->sk->sk_wmem_alloc);
@@ -173,8 +177,8 @@
 			break;
 		}
 		if (err != len)
-			pr_err("Truncated TX packet: "
-			       " len %d != %zd\n", err, len);
+			pr_debug("Truncated TX packet: "
+				 " len %d != %zd\n", err, len);
 		vhost_add_used_and_signal(&net->dev, vq, head, 0);
 		total_len += len;
 		if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
@@ -192,7 +196,8 @@
 static void handle_rx(struct vhost_net *net)
 {
 	struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_RX];
-	unsigned head, out, in, log, s;
+	unsigned out, in, log, s;
+	int head;
 	struct vhost_log *vq_log;
 	struct msghdr msg = {
 		.msg_name = NULL,
@@ -228,6 +233,9 @@
 					 ARRAY_SIZE(vq->iov),
 					 &out, &in,
 					 vq_log, &log);
+		/* On error, stop handling until the next kick. */
+		if (unlikely(head < 0))
+			break;
 		/* OK, now we need to know about added descriptors. */
 		if (head == vq->num) {
 			if (unlikely(vhost_enable_notify(vq))) {
@@ -267,8 +275,8 @@
 		}
 		/* TODO: Should check and handle checksum. */
 		if (err > len) {
-			pr_err("Discarded truncated rx packet: "
-			       " len %d > %zd\n", err, len);
+			pr_debug("Discarded truncated rx packet: "
+				 " len %d > %zd\n", err, len);
 			vhost_discard_vq_desc(vq);
 			continue;
 		}
@@ -526,11 +534,16 @@
 	rcu_assign_pointer(vq->private_data, sock);
 	vhost_net_enable_vq(n, vq);
 done:
+	mutex_unlock(&vq->mutex);
+
 	if (oldsock) {
 		vhost_net_flush_vq(n, index);
 		fput(oldsock->file);
 	}
 
+	mutex_unlock(&n->dev.mutex);
+	return 0;
+
 err_vq:
 	mutex_unlock(&vq->mutex);
 err:
@@ -637,7 +650,7 @@
 };
 
 static struct miscdevice vhost_net_misc = {
-	VHOST_NET_MINOR,
+	MISC_DYNAMIC_MINOR,
 	"vhost-net",
 	&vhost_net_fops,
 };
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 3b83382..0b99783 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -736,12 +736,12 @@
 	mem = rcu_dereference(dev->memory);
 	while ((u64)len > s) {
 		u64 size;
-		if (ret >= iov_size) {
+		if (unlikely(ret >= iov_size)) {
 			ret = -ENOBUFS;
 			break;
 		}
 		reg = find_region(mem, addr, len);
-		if (!reg) {
+		if (unlikely(!reg)) {
 			ret = -EFAULT;
 			break;
 		}
@@ -780,18 +780,18 @@
 	return next;
 }
 
-static unsigned get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
-			     struct iovec iov[], unsigned int iov_size,
-			     unsigned int *out_num, unsigned int *in_num,
-			     struct vhost_log *log, unsigned int *log_num,
-			     struct vring_desc *indirect)
+static int get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
+			struct iovec iov[], unsigned int iov_size,
+			unsigned int *out_num, unsigned int *in_num,
+			struct vhost_log *log, unsigned int *log_num,
+			struct vring_desc *indirect)
 {
 	struct vring_desc desc;
 	unsigned int i = 0, count, found = 0;
 	int ret;
 
 	/* Sanity check */
-	if (indirect->len % sizeof desc) {
+	if (unlikely(indirect->len % sizeof desc)) {
 		vq_err(vq, "Invalid length in indirect descriptor: "
 		       "len 0x%llx not multiple of 0x%zx\n",
 		       (unsigned long long)indirect->len,
@@ -801,7 +801,7 @@
 
 	ret = translate_desc(dev, indirect->addr, indirect->len, vq->indirect,
 			     ARRAY_SIZE(vq->indirect));
-	if (ret < 0) {
+	if (unlikely(ret < 0)) {
 		vq_err(vq, "Translation failure %d in indirect.\n", ret);
 		return ret;
 	}
@@ -813,7 +813,7 @@
 	count = indirect->len / sizeof desc;
 	/* Buffers are chained via a 16 bit next field, so
 	 * we can have at most 2^16 of these. */
-	if (count > USHRT_MAX + 1) {
+	if (unlikely(count > USHRT_MAX + 1)) {
 		vq_err(vq, "Indirect buffer length too big: %d\n",
 		       indirect->len);
 		return -E2BIG;
@@ -821,19 +821,19 @@
 
 	do {
 		unsigned iov_count = *in_num + *out_num;
-		if (++found > count) {
+		if (unlikely(++found > count)) {
 			vq_err(vq, "Loop detected: last one at %u "
 			       "indirect size %u\n",
 			       i, count);
 			return -EINVAL;
 		}
-		if (memcpy_fromiovec((unsigned char *)&desc, vq->indirect,
-				     sizeof desc)) {
+		if (unlikely(memcpy_fromiovec((unsigned char *)&desc, vq->indirect,
+					      sizeof desc))) {
 			vq_err(vq, "Failed indirect descriptor: idx %d, %zx\n",
 			       i, (size_t)indirect->addr + i * sizeof desc);
 			return -EINVAL;
 		}
-		if (desc.flags & VRING_DESC_F_INDIRECT) {
+		if (unlikely(desc.flags & VRING_DESC_F_INDIRECT)) {
 			vq_err(vq, "Nested indirect descriptor: idx %d, %zx\n",
 			       i, (size_t)indirect->addr + i * sizeof desc);
 			return -EINVAL;
@@ -841,7 +841,7 @@
 
 		ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
 				     iov_size - iov_count);
-		if (ret < 0) {
+		if (unlikely(ret < 0)) {
 			vq_err(vq, "Translation failure %d indirect idx %d\n",
 			       ret, i);
 			return ret;
@@ -857,7 +857,7 @@
 		} else {
 			/* If it's an output descriptor, they're all supposed
 			 * to come before any input descriptors. */
-			if (*in_num) {
+			if (unlikely(*in_num)) {
 				vq_err(vq, "Indirect descriptor "
 				       "has out after in: idx %d\n", i);
 				return -EINVAL;
@@ -873,12 +873,13 @@
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found, or vq->num (which
- * is never a valid descriptor number) if none was found. */
-unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
-			   struct iovec iov[], unsigned int iov_size,
-			   unsigned int *out_num, unsigned int *in_num,
-			   struct vhost_log *log, unsigned int *log_num)
+ * This function returns the descriptor number found, or vq->num (which is
+ * never a valid descriptor number) if none was found.  A negative code is
+ * returned on error. */
+int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
+		      struct iovec iov[], unsigned int iov_size,
+		      unsigned int *out_num, unsigned int *in_num,
+		      struct vhost_log *log, unsigned int *log_num)
 {
 	struct vring_desc desc;
 	unsigned int i, head, found = 0;
@@ -887,16 +888,16 @@
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
 	last_avail_idx = vq->last_avail_idx;
-	if (get_user(vq->avail_idx, &vq->avail->idx)) {
+	if (unlikely(get_user(vq->avail_idx, &vq->avail->idx))) {
 		vq_err(vq, "Failed to access avail idx at %p\n",
 		       &vq->avail->idx);
-		return vq->num;
+		return -EFAULT;
 	}
 
-	if ((u16)(vq->avail_idx - last_avail_idx) > vq->num) {
+	if (unlikely((u16)(vq->avail_idx - last_avail_idx) > vq->num)) {
 		vq_err(vq, "Guest moved used index from %u to %u",
 		       last_avail_idx, vq->avail_idx);
-		return vq->num;
+		return -EFAULT;
 	}
 
 	/* If there's nothing new since last we looked, return invalid. */
@@ -908,18 +909,19 @@
 
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
-	if (get_user(head, &vq->avail->ring[last_avail_idx % vq->num])) {
+	if (unlikely(get_user(head,
+			      &vq->avail->ring[last_avail_idx % vq->num]))) {
 		vq_err(vq, "Failed to read head: idx %d address %p\n",
 		       last_avail_idx,
 		       &vq->avail->ring[last_avail_idx % vq->num]);
-		return vq->num;
+		return -EFAULT;
 	}
 
 	/* If their number is silly, that's an error. */
-	if (head >= vq->num) {
+	if (unlikely(head >= vq->num)) {
 		vq_err(vq, "Guest says index %u > %u is available",
 		       head, vq->num);
-		return vq->num;
+		return -EINVAL;
 	}
 
 	/* When we start there are none of either input nor output. */
@@ -930,41 +932,41 @@
 	i = head;
 	do {
 		unsigned iov_count = *in_num + *out_num;
-		if (i >= vq->num) {
+		if (unlikely(i >= vq->num)) {
 			vq_err(vq, "Desc index is %u > %u, head = %u",
 			       i, vq->num, head);
-			return vq->num;
+			return -EINVAL;
 		}
-		if (++found > vq->num) {
+		if (unlikely(++found > vq->num)) {
 			vq_err(vq, "Loop detected: last one at %u "
 			       "vq size %u head %u\n",
 			       i, vq->num, head);
-			return vq->num;
+			return -EINVAL;
 		}
 		ret = copy_from_user(&desc, vq->desc + i, sizeof desc);
-		if (ret) {
+		if (unlikely(ret)) {
 			vq_err(vq, "Failed to get descriptor: idx %d addr %p\n",
 			       i, vq->desc + i);
-			return vq->num;
+			return -EFAULT;
 		}
 		if (desc.flags & VRING_DESC_F_INDIRECT) {
 			ret = get_indirect(dev, vq, iov, iov_size,
 					   out_num, in_num,
 					   log, log_num, &desc);
-			if (ret < 0) {
+			if (unlikely(ret < 0)) {
 				vq_err(vq, "Failure detected "
 				       "in indirect descriptor at idx %d\n", i);
-				return vq->num;
+				return ret;
 			}
 			continue;
 		}
 
 		ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
 				     iov_size - iov_count);
-		if (ret < 0) {
+		if (unlikely(ret < 0)) {
 			vq_err(vq, "Translation failure %d descriptor idx %d\n",
 			       ret, i);
-			return vq->num;
+			return ret;
 		}
 		if (desc.flags & VRING_DESC_F_WRITE) {
 			/* If this is an input descriptor,
@@ -978,10 +980,10 @@
 		} else {
 			/* If it's an output descriptor, they're all supposed
 			 * to come before any input descriptors. */
-			if (*in_num) {
+			if (unlikely(*in_num)) {
 				vq_err(vq, "Descriptor has out after in: "
 				       "idx %d\n", i);
-				return vq->num;
+				return -EINVAL;
 			}
 			*out_num += ret;
 		}
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 44591ba..11ee13d 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -120,10 +120,10 @@
 int vhost_vq_access_ok(struct vhost_virtqueue *vq);
 int vhost_log_access_ok(struct vhost_dev *);
 
-unsigned vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
-			   struct iovec iov[], unsigned int iov_count,
-			   unsigned int *out_num, unsigned int *in_num,
-			   struct vhost_log *log, unsigned int *log_num);
+int vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
+		      struct iovec iov[], unsigned int iov_count,
+		      unsigned int *out_num, unsigned int *in_num,
+		      struct vhost_log *log, unsigned int *log_num);
 void vhost_discard_vq_desc(struct vhost_virtqueue *);
 
 int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1e6fec4..3d94a14 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,6 +8,9 @@
 config HAVE_FB_ATMEL
 	bool
 
+config HAVE_FB_IMX
+	bool
+
 source "drivers/char/agp/Kconfig"
 
 source "drivers/gpu/vga/Kconfig"
@@ -400,9 +403,6 @@
 	  If you plan to use the LCD display with your SA-1100 system, say
 	  Y here.
 
-config HAVE_FB_IMX
-	bool
-
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
 	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 515cf19..c4e1764 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2872,7 +2872,7 @@
 		}
 
 #if 0
-		/* Power down TV DAC, taht saves a significant amount of power,
+		/* Power down TV DAC, that saves a significant amount of power,
 		 * we'll have something better once we actually have some TVOut
 		 * support
 		 */
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 40f6132..34b2fc47 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -95,7 +95,7 @@
 	{ { 8, 4, 0 },  { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
 };
 
-static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+static struct fb_fix_screeninfo au1100fb_fix __devinitdata = {
 	.id		= "AU1100 FB",
 	.xpanstep 	= 1,
 	.ypanstep 	= 1,
@@ -103,7 +103,7 @@
 	.accel		= FB_ACCEL_NONE,
 };
 
-static struct fb_var_screeninfo au1100fb_var __initdata = {
+static struct fb_var_screeninfo au1100fb_var __devinitdata = {
 	.activate	= FB_ACTIVATE_NOW,
 	.height		= -1,
 	.width		= -1,
@@ -458,7 +458,7 @@
 
 /* AU1100 LCD controller device driver */
 
-static int __init au1100fb_drv_probe(struct platform_device *dev)
+static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 {
 	struct au1100fb_device *fbdev = NULL;
 	struct resource *regs_res;
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 3a561df2..0c1afd1 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -388,6 +388,7 @@
 		pseudo_val |= convert_bitfield(red, &var->red);
 		pseudo_val |= convert_bitfield(green, &var->green);
 		pseudo_val |= convert_bitfield(blue, &var->blue);
+		ret = 0;
 		break;
 	}
 
@@ -436,6 +437,8 @@
 	cyber2000fb_writeb(i | 4, 0x3cf, cfb);
 	cyber2000fb_writeb(val, 0x3c6, cfb);
 	cyber2000fb_writeb(i, 0x3cf, cfb);
+	/* prevent card lock-up observed on x86 with CyberPro 2000 */
+	cyber2000fb_readb(0x3cf, cfb);
 }
 
 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 073c9b4..6b93ef9 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -100,6 +100,16 @@
 	/* protect against the workqueue changing the page list */
 	mutex_lock(&fbdefio->lock);
 
+	/*
+	 * We want the page to remain locked from ->page_mkwrite until
+	 * the PTE is marked dirty to avoid page_mkclean() being called
+	 * before the PTE is updated, which would leave the page ignored
+	 * by defio.
+	 * Do this by locking the page here and informing the caller
+	 * about it with VM_FAULT_LOCKED.
+	 */
+	lock_page(page);
+
 	/* we loop through the pagelist before adding in order
 	to keep the pagelist sorted */
 	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
@@ -121,7 +131,7 @@
 
 	/* come back after delay to process the deferred IO */
 	schedule_delayed_work(&info->deferred_work, fbdefio->delay);
-	return 0;
+	return VM_FAULT_LOCKED;
 }
 
 static const struct vm_operations_struct fb_deferred_io_vm_ops = {
@@ -155,41 +165,25 @@
 {
 	struct fb_info *info = container_of(work, struct fb_info,
 						deferred_work.work);
+	struct list_head *node, *next;
+	struct page *cur;
 	struct fb_deferred_io *fbdefio = info->fbdefio;
-	struct page *page, *tmp_page;
-	struct list_head *node, *tmp_node;
-	struct list_head non_dirty;
-
-	INIT_LIST_HEAD(&non_dirty);
 
 	/* here we mkclean the pages, then do all deferred IO */
 	mutex_lock(&fbdefio->lock);
-	list_for_each_entry_safe(page, tmp_page, &fbdefio->pagelist, lru) {
-		lock_page(page);
-		/*
-		 * The workqueue callback can be triggered after a
-		 * ->page_mkwrite() call but before the PTE has been marked
-		 * dirty. In this case page_mkclean() won't "rearm" the page.
-		 *
-		 * To avoid this, remove those "non-dirty" pages from the
-		 * pagelist before calling the driver's callback, then add
-		 * them back to get processed on the next work iteration.
-		 * At that time, their PTEs will hopefully be dirty for real.
-		 */
-		if (!page_mkclean(page))
-			list_move_tail(&page->lru, &non_dirty);
-		unlock_page(page);
+	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+		lock_page(cur);
+		page_mkclean(cur);
+		unlock_page(cur);
 	}
 
 	/* driver's callback with pagelist */
 	fbdefio->deferred_io(info, &fbdefio->pagelist);
 
-	/* clear the list... */
-	list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
+	/* clear the list */
+	list_for_each_safe(node, next, &fbdefio->pagelist) {
 		list_del(node);
 	}
-	/* ... and add back the "non-dirty" pages to the list */
-	list_splice_tail(&non_dirty, &fbdefio->pagelist);
 	mutex_unlock(&fbdefio->lock);
 }
 
@@ -218,7 +212,6 @@
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	struct fb_deferred_io *fbdefio = info->fbdefio;
-	struct list_head *node, *tmp_node;
 	struct page *page;
 	int i;
 
@@ -226,13 +219,6 @@
 	cancel_delayed_work(&info->deferred_work);
 	flush_scheduled_work();
 
-	/*  the list may have still some non-dirty pages at this point */
-	mutex_lock(&fbdefio->lock);
-	list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
-		list_del(node);
-	}
-	mutex_unlock(&fbdefio->lock);
-
 	/* clear out the mapping that we setup */
 	for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
 		page = fb_deferred_io_page(info, i);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 7d8c55d..ca3355e 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -91,10 +91,10 @@
 static uint32_t gbe_cmap[256];
 static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
 
 /* default CRT mode */
-static struct fb_var_screeninfo default_var_CRT __initdata = {
+static struct fb_var_screeninfo default_var_CRT __devinitdata = {
 	/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
 	.xres		= 640,
 	.yres		= 480,
@@ -125,7 +125,7 @@
 };
 
 /* default LCD mode */
-static struct fb_var_screeninfo default_var_LCD __initdata = {
+static struct fb_var_screeninfo default_var_LCD __devinitdata = {
 	/* 1600x1024, 8 bpp */
 	.xres		= 1600,
 	.yres		= 1024,
@@ -157,7 +157,7 @@
 
 /* default modedb mode */
 /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
-static struct fb_videomode default_mode_CRT __initdata = {
+static struct fb_videomode default_mode_CRT __devinitdata = {
 	.refresh	= 60,
 	.xres		= 640,
 	.yres		= 480,
@@ -172,7 +172,7 @@
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 /* 1600x1024 SGI flatpanel 1600sw */
-static struct fb_videomode default_mode_LCD __initdata = {
+static struct fb_videomode default_mode_LCD __devinitdata = {
 	/* 1600x1024, 8 bpp */
 	.xres		= 1600,
 	.yres		= 1024,
@@ -186,8 +186,8 @@
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __devinitdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __devinitdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
@@ -1098,7 +1098,7 @@
  * Initialization
  */
 
-static int __init gbefb_setup(char *options)
+static int __devinit gbefb_setup(char *options)
 {
 	char *this_opt;
 
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 76e7dac..70b1d9d 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -40,7 +40,7 @@
 static int vt_switch;
 
 /* Modes relevant to the GX (taken from modedb.c) */
-static struct fb_videomode gx_modedb[] __initdata = {
+static struct fb_videomode gx_modedb[] __devinitdata = {
 	/* 640x480-60 VESA */
 	{ NULL, 60, 640, 480, 39682,  48, 16, 33, 10, 96, 2,
 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -110,14 +110,15 @@
 #ifdef CONFIG_OLPC
 #include <asm/olpc.h>
 
-static struct fb_videomode gx_dcon_modedb[] __initdata = {
+static struct fb_videomode gx_dcon_modedb[] __devinitdata = {
 	/* The only mode the DCON has is 1200x900 */
 	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	  FB_VMODE_NONINTERLACED, 0 }
 };
 
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	if (olpc_has_dcon()) {
 		*modedb = (struct fb_videomode *) gx_dcon_modedb;
@@ -129,7 +130,8 @@
 }
 
 #else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	*modedb = (struct fb_videomode *) gx_modedb;
 	*size = ARRAY_SIZE(gx_modedb);
@@ -226,7 +228,8 @@
 	return gx_blank_display(info, blank_mode);
 }
 
-static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+static int __devinit gxfb_map_video_memory(struct fb_info *info,
+		struct pci_dev *dev)
 {
 	struct gxfb_par *par = info->par;
 	int ret;
@@ -290,7 +293,7 @@
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+static struct fb_info *__devinit gxfb_init_fbinfo(struct device *dev)
 {
 	struct gxfb_par *par;
 	struct fb_info *info;
@@ -371,7 +374,8 @@
 }
 #endif
 
-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit gxfb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
 {
 	struct gxfb_par *par;
 	struct fb_info *info;
@@ -451,7 +455,7 @@
 	return ret;
 }
 
-static void gxfb_remove(struct pci_dev *pdev)
+static void __devexit gxfb_remove(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct gxfb_par *par = info->par;
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 1a18da8..39bdbed 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -35,7 +35,7 @@
  * we try to make it something sane - 640x480-60 is sane
  */
 
-static struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __devinitdata = {
 	/* 640x480-60 */
 	{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
@@ -219,14 +219,15 @@
 #ifdef CONFIG_OLPC
 #include <asm/olpc.h>
 
-static struct fb_videomode olpc_dcon_modedb[] __initdata = {
+static struct fb_videomode olpc_dcon_modedb[] __devinitdata = {
 	/* The only mode the DCON has is 1200x900 */
 	{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
 	  FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	  FB_VMODE_NONINTERLACED, 0 }
 };
 
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	if (olpc_has_dcon()) {
 		*modedb = (struct fb_videomode *) olpc_dcon_modedb;
@@ -238,7 +239,8 @@
 }
 
 #else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+		unsigned int *size)
 {
 	*modedb = (struct fb_videomode *) geode_modedb;
 	*size = ARRAY_SIZE(geode_modedb);
@@ -334,7 +336,7 @@
 }
 
 
-static int __init lxfb_map_video_memory(struct fb_info *info,
+static int __devinit lxfb_map_video_memory(struct fb_info *info,
 					struct pci_dev *dev)
 {
 	struct lxfb_par *par = info->par;
@@ -412,7 +414,7 @@
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+static struct fb_info * __devinit lxfb_init_fbinfo(struct device *dev)
 {
 	struct lxfb_par *par;
 	struct fb_info *info;
@@ -496,7 +498,7 @@
 #define lxfb_resume NULL
 #endif
 
-static int __init lxfb_probe(struct pci_dev *pdev,
+static int __devinit lxfb_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *id)
 {
 	struct lxfb_par *par;
@@ -588,7 +590,7 @@
 	return ret;
 }
 
-static void lxfb_remove(struct pci_dev *pdev)
+static void __devexit lxfb_remove(struct pci_dev *pdev)
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct lxfb_par *par = info->par;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index b4b6dece..43f0639 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -175,6 +175,7 @@
 
 	struct imx_fb_videomode *mode;
 	int			num_modes;
+	struct backlight_device *bl;
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
@@ -449,6 +450,73 @@
 	return 0;
 }
 
+
+
+static int imxfb_bl_get_brightness(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+
+	return readl(fbi->regs + LCDC_PWMR) & 0xFF;
+}
+
+static int imxfb_bl_update_status(struct backlight_device *bl)
+{
+	struct imxfb_info *fbi = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	fbi->pwmr = (fbi->pwmr & ~0xFF) | brightness;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_enable(fbi->clk);
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		clk_disable(fbi->clk);
+
+	return 0;
+}
+
+static const struct backlight_ops imxfb_lcdc_bl_ops = {
+	.update_status = imxfb_bl_update_status,
+	.get_brightness = imxfb_bl_get_brightness,
+};
+
+static void imxfb_init_backlight(struct imxfb_info *fbi)
+{
+	struct backlight_properties props;
+	struct backlight_device	*bl;
+
+	if (fbi->bl)
+		return;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+
+	bl = backlight_device_register("imxfb-bl", &fbi->pdev->dev, fbi,
+				       &imxfb_lcdc_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&fbi->pdev->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+
+	fbi->bl = bl;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.brightness = imxfb_bl_get_brightness(bl);
+}
+
+static void imxfb_exit_backlight(struct imxfb_info *fbi)
+{
+	if (fbi->bl)
+		backlight_device_unregister(fbi->bl);
+}
+
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
 	pr_debug("Enabling LCD controller\n");
@@ -579,7 +647,6 @@
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);
-	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
@@ -779,6 +846,8 @@
 	}
 
 	imxfb_enable_controller(fbi);
+	fbi->pdev = pdev;
+	imxfb_init_backlight(fbi);
 
 	return 0;
 
@@ -816,6 +885,7 @@
 
 	imxfb_disable_controller(fbi);
 
+	imxfb_exit_backlight(fbi);
 	unregister_framebuffer(info);
 
 	pdata = pdev->dev.platform_data;
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
index d4cde79..81687ed 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/nuc900fb.c
@@ -596,8 +596,6 @@
 		goto release_regs;
 	}
 
-	nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
-
 	fbi->clk = clk_get(&pdev->dev, NULL);
 	if (!fbi->clk || IS_ERR(fbi->clk)) {
 		printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 43ab7d8..7767338 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -572,22 +572,12 @@
 /* PM code called only in internal controller mode */
 static void omap_lcdc_suspend(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		disable_controller();
-		omap_stop_lcd_dma();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
 }
 
 static void omap_lcdc_resume(void)
 {
-	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
-		setup_regs();
-		load_palette();
-		setup_lcd_dma();
-		set_load_mode(OMAP_LCDC_LOAD_FRAME);
-		enable_irqs(OMAP_LCDC_IRQ_DONE);
-		enable_controller();
-	}
+	omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
 }
 
 static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index 1162603..eada9f1 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include "omapfb.h"
 #include "dispc.h"
@@ -83,13 +84,13 @@
 
 static int rfbi_get_clocks(void)
 {
-	rfbi.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
+	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
 	if (IS_ERR(rfbi.dss_ick)) {
 		dev_err(rfbi.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	rfbi.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
+	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
 	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 3b1237a..f6fdc20 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -25,7 +25,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/completion.h>
 #include <linux/debugfs.h>
 #include <linux/jiffies.h>
@@ -525,10 +525,8 @@
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void __init omap_vram_reserve_sdram(void)
+void __init omap_vram_reserve_sdram_memblock(void)
 {
-	struct bootmem_data	*bdata;
-	unsigned long		sdram_start, sdram_size;
 	u32 paddr;
 	u32 size = 0;
 
@@ -555,29 +553,28 @@
 
 	size = PAGE_ALIGN(size);
 
-	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-
 	if (paddr) {
-		if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
-				paddr + size > sdram_start + sdram_size) {
+		struct memblock_property res;
+
+		res.base = paddr;
+		res.size = size;
+		if ((paddr & ~PAGE_MASK) || memblock_find(&res) ||
+		    res.base != paddr || res.size != size) {
 			pr_err("Illegal SDRAM region for VRAM\n");
 			return;
 		}
 
-		if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
-			pr_err("FB: failed to reserve VRAM\n");
-			return;
-		}
-	} else {
-		if (size > sdram_size) {
-			pr_err("Illegal SDRAM size for VRAM\n");
+		if (memblock_is_region_reserved(paddr, size)) {
+			pr_err("FB: failed to reserve VRAM - busy\n");
 			return;
 		}
 
-		paddr = virt_to_phys(alloc_bootmem_pages(size));
-		BUG_ON(paddr & ~PAGE_MASK);
+		if (memblock_reserve(paddr, size) < 0) {
+			pr_err("FB: failed to reserve VRAM - no memory\n");
+			return;
+		}
+	} else {
+		paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
 	}
 
 	omap_vram_add_region(paddr, size);
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index 0f361b6..0c69fa2 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -44,7 +44,7 @@
 };
 
 
-static struct fb_var_screeninfo pmagbafb_defined __initdata = {
+static struct fb_var_screeninfo pmagbafb_defined __devinitdata = {
 	.xres		= 1024,
 	.yres		= 864,
 	.xres_virtual	= 1024,
@@ -68,7 +68,7 @@
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_fix_screeninfo pmagbafb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbafb_fix __devinitdata = {
 	.id		= "PMAG-BA",
 	.smem_len	= (1024 * 1024),
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -142,7 +142,7 @@
 }
 
 
-static int __init pmagbafb_probe(struct device *dev)
+static int __devinit pmagbafb_probe(struct device *dev)
 {
 	struct tc_dev *tdev = to_tc_dev(dev);
 	resource_size_t start, len;
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 2de0806..22fcb9a 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -45,7 +45,7 @@
 };
 
 
-static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
+static struct fb_var_screeninfo pmagbbfb_defined __devinitdata = {
 	.bits_per_pixel	= 8,
 	.red.length	= 8,
 	.green.length	= 8,
@@ -58,7 +58,7 @@
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-static struct fb_fix_screeninfo pmagbbfb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbbfb_fix __devinitdata = {
 	.id		= "PMAGB-BA",
 	.smem_len	= (2048 * 1024),
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -148,7 +148,7 @@
 /*
  * Set up screen parameters.
  */
-static void __init pmagbbfb_screen_setup(struct fb_info *info)
+static void __devinit pmagbbfb_screen_setup(struct fb_info *info)
 {
 	struct pmagbbfb_par *par = info->par;
 
@@ -180,9 +180,9 @@
 /*
  * Determine oscillator configuration.
  */
-static void __init pmagbbfb_osc_setup(struct fb_info *info)
+static void __devinit pmagbbfb_osc_setup(struct fb_info *info)
 {
-	static unsigned int pmagbbfb_freqs[] __initdata = {
+	static unsigned int pmagbbfb_freqs[] __devinitdata = {
 		130808, 119843, 104000, 92980, 74370, 72800,
 		69197, 66000, 65000, 50350, 36000, 32000, 25175
 	};
@@ -247,7 +247,7 @@
 };
 
 
-static int __init pmagbbfb_probe(struct device *dev)
+static int __devinit pmagbbfb_probe(struct device *dev)
 {
 	struct tc_dev *tdev = to_tc_dev(dev);
 	resource_size_t start, len;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index e8c7699..12c451a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -991,13 +991,13 @@
 		priv->ch[j].lcdc = priv;
 		memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
 
-		error = sh_mobile_lcdc_check_interface(&priv->ch[i]);
+		error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
 		if (error) {
 			dev_err(&pdev->dev, "unsupported interface type\n");
 			goto err1;
 		}
-		init_waitqueue_head(&priv->ch[i].frame_end_wait);
-		init_completion(&priv->ch[i].vsync_completion);
+		init_waitqueue_head(&priv->ch[j].frame_end_wait);
+		init_completion(&priv->ch[j].vsync_completion);
 		priv->ch[j].pan_offset = 0;
 
 		switch (pdata->ch[i].chan) {
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 95896f3..ef8d9d5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -636,6 +636,9 @@
 	INIT_LIST_HEAD(&vp_dev->virtqueues);
 	spin_lock_init(&vp_dev->lock);
 
+	/* Disable MSI/MSIX to bring device to a known good state. */
+	pci_msi_off(pci_dev);
+
 	/* enable the device */
 	err = pci_enable_device(pci_dev);
 	if (err)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1ca8890..1475ed6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -119,7 +119,7 @@
 
 	desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp);
 	if (!desc)
-		return vq->vring.num;
+		return -ENOMEM;
 
 	/* Transfer entries from the sg list into the indirect page */
 	for (i = 0; i < out; i++) {
@@ -164,7 +164,8 @@
 			  gfp_t gfp)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
-	unsigned int i, avail, head, uninitialized_var(prev);
+	unsigned int i, avail, uninitialized_var(prev);
+	int head;
 
 	START_USE(vq);
 
@@ -174,7 +175,7 @@
 	 * buffers, then go indirect. FIXME: tune this threshold */
 	if (vq->indirect && (out + in) > 1 && vq->num_free) {
 		head = vring_add_indirect(vq, sg, out, in, gfp);
-		if (head != vq->vring.num)
+		if (likely(head >= 0))
 			goto add_head;
 	}
 
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 1cddf92..750bc52 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -346,9 +346,13 @@
 	} else {
 		wdt->users = 0;
 	}
-	wdt->miscdev.minor = WATCHDOG_MINOR;
-	wdt->miscdev.name = "watchdog";
-	wdt->miscdev.fops = &at32_wdt_fops;
+
+	wdt->miscdev.minor	= WATCHDOG_MINOR;
+	wdt->miscdev.name	= "watchdog";
+	wdt->miscdev.fops	= &at32_wdt_fops;
+	wdt->miscdev.parent	= &pdev->dev;
+
+	platform_set_drvdata(pdev, wdt);
 
 	if (at32_wdt_settimeout(timeout)) {
 		at32_wdt_settimeout(TIMEOUT_DEFAULT);
@@ -360,17 +364,17 @@
 	ret = misc_register(&wdt->miscdev);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
-		goto err_iounmap;
+		goto err_register;
 	}
 
-	platform_set_drvdata(pdev, wdt);
-	wdt->miscdev.parent = &pdev->dev;
 	dev_info(&pdev->dev,
 		"AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
 		wdt->regs, wdt->timeout, nowayout);
 
 	return 0;
 
+err_register:
+	platform_set_drvdata(pdev, NULL);
 err_iounmap:
 	iounmap(wdt->regs);
 err_free:
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index ea25885..2ee7dac 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -330,7 +330,6 @@
 }
 
 static struct platform_driver imx2_wdt_driver = {
-	.probe		= imx2_wdt_probe,
 	.remove		= __exit_p(imx2_wdt_remove),
 	.shutdown	= imx2_wdt_shutdown,
 	.driver		= {
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 89dd7b0..b68d928 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -284,7 +284,7 @@
 	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
 
 	if (!wm8350) {
-		dev_err(wm8350->dev, "No driver data supplied\n");
+		pr_err("No driver data supplied\n");
 		return -ENODEV;
 	}
 
diff --git a/firmware/Makefile b/firmware/Makefile
index 243409f..020e629 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -83,6 +83,7 @@
 fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
 					 qlogic/12160.bin
 fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index e8e550f..ae5f8a4 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -858,3 +858,43 @@
 Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
+
+Driver: ib_qib - QLogic Infiniband
+
+File: qlogic/sd7220.fw
+
+Licence:
+
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
diff --git a/firmware/qlogic/sd7220.fw.ihex b/firmware/qlogic/sd7220.fw.ihex
new file mode 100644
index 0000000..a336363
--- /dev/null
+++ b/firmware/qlogic/sd7220.fw.ihex
@@ -0,0 +1,513 @@
+:10000000020A29020A87E5E630E6047F0180027FC2
+:1000100000E5E230E4047E0180027E00EE5F6008CD
+:1000200053F9F7E4F5FE80087F0A121731120EA289
+:1000300075FC08E4F5FDE5E720E70343F908220035
+:1000400001201100042000755101E4F552F553F52B
+:1000500052F57E7F04020438C2360552E552D3942D
+:100060000C4005755201D23690070C7407F0A3744A
+:10007000FFF0E4F50CA3F0900714F0A3F0750B204B
+:10008000F509E4F508E508D39430400302040412AE
+:100090000006150BE50870047F0180027F00E5096A
+:1000A00070047E0180027E00EE5F6005121871D23E
+:1000B0003553E1F7E5084509FFE50B25E025E02488
+:1000C00083F582E43407F583EFF085E220E552D32F
+:1000D0009401400D1219F3E054A064407003020330
+:1000E000FB53F9F8909470E4F0E0F510AF09121E9C
+:1000F000B3AF08EF4408F582758380E0F529EF443B
+:1001000007121A3CF5225440D39400401EE52954AE
+:10011000F070211219F3E04480F0E52254306508B4
+:1001200070091219F3E054BFF080091219F37440FA
+:10013000F00203FB121A127583AE74FFF0AF087E53
+:1001400000EF4407F582E0FDE50B25E025E0248182
+:10015000F582E43407F583EDF090070EE004F0EF4C
+:100160004407F582758398E0F528121A23400C1293
+:1001700019F3E04401121A320203F6AF087E00744C
+:1001800080CDEFCD8D82F583E030E00A1219F3E0E7
+:100190004420F00203FB1219F3E054DFF0EE44AE0A
+:1001A000121A4330E4030203FB749E121A0520E086
+:1001B000030203FB8F828E83E020E0030203FB1225
+:1001C00019F3E04410F0E5E320E708E508121A3AD5
+:1001D0004404F0AF087E00EF121A3A20E2341219FC
+:1001E000F3E04408F0E5E430E6047D0180027D00A0
+:1001F000E57EC3940450047C0180027C00EC4D60D9
+:1002000005C2350203FBEE44D2121A434440F00209
+:1002100003FB1219F3E054F7F0121A127583D2E0BF
+:1002200054BFF0900714E004F0E57E7003757E0182
+:10023000AF087E00121A2340121219F3E044011293
+:1002400019F2E05402121A320203FB1219F3E044CD
+:10025000021219F2E054FEF0C235EE448A8F82F5A4
+:1002600083E0F517548F4440F07490FCE508440790
+:10027000FDF5828C83E0543F900702F0E054C08D7E
+:10028000828C83F07492121A05900703121A197463
+:1002900082121A05900704121A1974B4121A0590E2
+:1002A0000705121A197494FEE5084406121A0AF595
+:1002B0001030E004D2378002C237E510547F8F82BD
+:1002C0008E83F0304430121A035480D394004004DB
+:1002D000D2398002C2398F828E83E04480F0121AB4
+:1002E000035440D394004004D23A8002C23A8F8231
+:1002F0008E83E04440F07492FEE5084406121A0A28
+:1003000030E704D2388002C2388F828E83E0547F77
+:10031000F0121E46E4F50A20030280033043031264
+:1003200019952002028003304203120C8F303006F0
+:10033000121995120C8F120D471219F3E054FBF0AD
+:10034000E50AC39401404643E1081219F3E044046E
+:10035000F0E5E420E72A121A127583D2E05408D39C
+:10036000940040047F0180027F00E50AC3940140AD
+:10037000047E0180027E00EF5E6005121DD78017AB
+:10038000121A127583D2E04408F00203FB121A120B
+:100390007583D2E054F7F0121E467F0812173174AD
+:1003A0008EFE121A128E83E0F51054FEF0E5104412
+:1003B00001FFE508FDED4407F582EFF0E51054FE7E
+:1003C000FFED4407F582EF121A11758386E04410A1
+:1003D000121A11E04410F01219F3E054FD4401FF29
+:1003E0001219F3EF121A3230320CE5084408F58284
+:1003F0007583827405F0AF0B1218D774102508F5B9
+:10040000080200850509E509D3940750030200821C
+:10041000E57ED3940040047F0180027F00E57EC327
+:1004200094FA50047E0180027E00EE5F6002057E39
+:1004300030350B43E1017F0912173102005853E1B7
+:10044000FE0200588E6A8F6B8C6C8D6D756E017517
+:100450006F01757001E4F573F574F57590072FF071
+:10046000F53CF53EF546F547F53DF53FF56FE56F93
+:10047000700FE56B456A12072A758380743AF08025
+:100480000912072A758380741AF0E4F56EC3743F6D
+:10049000956EFF120865758382EFF0121A4D1208EF
+:1004A000C6E533F01208FA1208B140E1E56F700BAF
+:1004B00012072A7583807436F0800912072A758323
+:1004C000807416F0756E0112072A7583B4E56EF01C
+:1004D000121A4D743F256EF582E43400F583E5333E
+:1004E000F074BF256EF582E434001208B140D8E400
+:1004F000F570F546F547F56E1208FAF583E0FE1241
+:1005000008C6E07C002400FFEC3EFEAD3BD3EF9D2F
+:10051000EE9C50047B0180027B00E57070047A0140
+:1005200080027A00EB5A6006856E46757001D3EF43
+:100530009DEE9C50047F0180027F00E570B40104B1
+:100540007E0180027E00EF5E6003856E47056EE5EA
+:100550006E647F70A3E5466005E547B47E0385467B
+:1005600047E56F7008854676854777800EC3747FB0
+:100570009546F578C3747F9547F579E56F7037E553
+:10058000466547700C757301757401F53CF53D8047
+:1005900035E4F54EC3E5479546F53CC313F57125A3
+:1005A00046F572C3943F4005E4F53D8040C3743F77
+:1005B0009572F53D8037E5466547700F7573017597
+:1005C0007501F53EF53F754E018022E4F54EC3E519
+:1005D000479546F53EC313F5712546F572D3943F12
+:1005E0005005E4F53F8006E57224C1F53F056FE54F
+:1005F0006FC39402500302046EE56D456C70028077
+:1006000004E574457590072FF07F01E53E6004E531
+:100610003C7014E4F53CF53DF53EF53F1208D27010
+:1006200004F00206A4807AE53CC3953E4007E53C11
+:10063000953EFF8006C3E53E953CFFE576D3957970
+:10064000400585767A800385797AE577C395785079
+:100650000585777B800385787BE57BD3957A403071
+:10066000E57B957AF53CF53EC3E57B957A900719D5
+:10067000F0E53CC313F571257AF572C3943F40054C
+:10068000E4F53D801FC3743F9572F53DF53F80143E
+:10069000E4F53CF53E900719F01208D27003F080A3
+:1006A000037401F01208657583D0E0540FFEAD3C71
+:1006B00070027E07BE0F027E80EEFBEFD39B74803C
+:1006C000F898401FE4F53CF53E1208D27003F08024
+:1006D000127401F0E508FBEB4407F5827583D2E064
+:1006E0004410F0E508FBEB4409F58275839EEDF0BC
+:1006F000EB4407F5827583CAEDF01208657583CC6B
+:10070000EFF022E5084407F5827583BCE054F0F071
+:10071000E5084407F5827583BEE054F0F0E508442F
+:1007200007F5827583C0E054F0F0E5084407F582D0
+:1007300022F0900728E0FEA3E0F5828E8322854216
+:100740004285414185404074C02FF58274023EF5D8
+:1007500083E542F074E02FF58274023EF58322E5D2
+:100760004229FDE433FCE53CC39DEC6480F87480D1
+:100770009822F583E0900722541FFDE0FAA3E0F5EC
+:10078000828A83EDF022900722E0FCA3E0F5828CC0
+:100790008322900724FFED4407CFF0A3EFF02285DA
+:1007A0003838853939853A3A74C02FF58274023E5B
+:1007B000F58322900726FFED4407CFF0A3EFF02248
+:1007C000F074A02FF58274023EF5832274C02511C7
+:1007D000F582E43401F5832274002511F582E434B6
+:1007E00002F5832274602511F582E43403F5832237
+:1007F00074802511F582E43403F5832274E0251119
+:10080000F582E43403F5832274402511F582E43443
+:1008100006F5832274802FF58274023EF58322AFA1
+:10082000087E00EF4407F58222F583E5824407F550
+:1008300082E540F02274402511F582E43402F5830C
+:100840002274C02511F582E43403F5832274002557
+:1008500011F582E43406F5832274202511F582E433
+:100860003406F58322E508FDED4407F58222E541D3
+:10087000F0E56564014564227E00FB7A00FD7C00A2
+:100880002274202511F582E434022274A02511F58A
+:1008900082E4340322853E42853F418F4022853CDD
+:1008A00042853D418F402275453F900720E4F0A3EB
+:1008B00022F583E532F0056EE56EC3944022F0E543
+:1008C000084406F582227400256EF582E43400F5B2
+:1008D0008322E56D456C90072F22E4F9E53CD39522
+:1008E0003E2274802EF582E43402F583E02274A067
+:1008F0002EF582E43402F583E0227480256EF582C1
+:10090000E43400222542FDE433FC22854242854145
+:100910004185404022ED4C60030209E5EF4E7037FF
+:10092000900726120789E0FD1207CCEDF09007280A
+:10093000120789E0FD1207D8EDF0120786E0541F78
+:10094000FD120881F583EDF0900724120789E05429
+:100950001FFD120835EDF0EF64044E703790072646
+:10096000120789E0FD1207E4EDF0900728120789CD
+:10097000E0FD1207F0EDF0120786E0541FFD1208AB
+:100980008BF583EDF0900724120789E0541FFD12C8
+:100990000841EDF0EF64014E70047D0180027D009E
+:1009A000EF64024E70047F0180027F00EF4D60789B
+:1009B000900726120735E0FF1207FCEF120731E01F
+:1009C000FF120808EFF0900722120735E0541FFFCE
+:1009D00012084DEFF0900724120735E0541FFF1264
+:1009E0000859EFF0221207CCE4F01207D8E4F01215
+:1009F0000881F583E4F01208357414F01207E4E47A
+:100A0000F01207F0E4F012088BF583E4F0120841CD
+:100A10007414F01207FCE4F0120808E4F012084D18
+:100A2000E4F01208597414F02253F9F775FC10E43D
+:100A3000F5FD75FE30F5FFE5E720E70343F908E52E
+:100A4000E620E70B78FFE4F6D8FD53E6FE80097850
+:100A500008E4F6D8FD53E6FE758180E4F5A8D2A837
+:100A6000C2A9D2AFE5E220E50520E602800343E11A
+:100A700002E5E220E00E9000007F007E08E4F0A393
+:100A8000DFFCDEFA020ADB43FA01C0E0C0F0C083FB
+:100A9000C082C0D0121CE7D0D0D082D083D0F0D09A
+:100AA000E053FAFE32021B55E493A3F8E493A3F655
+:100AB00008DFF98029E493A3F85407240CC8C33352
+:100AC000C4540F4420C8834004F456800146F6DF26
+:100AD000E4800B010204081020408090003FE47E77
+:100AE000019360C1A3FF543F30E509541FFEE49316
+:100AF000A360010ECF54C025E060AD40B880FE8CED
+:100B0000648D658A668B67E4F569EF4E7003021D9C
+:100B100055E4F568E5674566703212072A758390DB
+:100B2000E41207297583C2E41207297583C4E4120D
+:100B30000870702912072A758392E41207297583B9
+:100B4000C6E41207297583C8E4F0801190072612C5
+:100B50000735E41208707005120732E4F0121D55D3
+:100B6000121EBFE5674566703312072A758390E54C
+:100B7000411207297583C2E5411207297583C41202
+:100B8000086E702912072A758392E54012072975AD
+:100B900083C6E5401207297583C8800E9007261288
+:100BA000073512086E7006120732E540F0AF697E15
+:100BB00000AD67AC6612044412072A7583CAE0D3FD
+:100BC0009400500C0568E568C394055003020B14AB
+:100BD000228C608D611208DA7420400D2FF582742A
+:100BE000033EF583E53EF0800B2FF58274033EF55E
+:100BF00083E53CF0E53CD3953E403CE561456070C3
+:100C000010E9120904E53E120768403B120895807E
+:100C100018E53EC39538401D853E38E53E600585A4
+:100C20003F3980038539398F3A120814E53E12079F
+:100C3000C0E53FF0228043E5614560701912075F0F
+:100C4000400512089E802712090B120814E5421273
+:100C500007C0E541F022E53CC39538401D853C388E
+:100C6000E53C6005853D3980038539398F3A1208A6
+:100C700014E53C1207C0E53DF02285383885393946
+:100C8000853A3A120814E5381207C0E539F0227F98
+:100C900006121731121D23120E04120E33E0440AFD
+:100CA000F0748EFE120E04120E0BEFF0E52830E504
+:100CB00003D38001C3400575142080037514081206
+:100CC0000E0475838AE514F0B4FF05751280800662
+:100CD000E514C313F512E4F516F57F121936121355
+:100CE000A3E50AC3940150090516E516C394144000
+:100CF000EAE5E420E728120E047583D2E05408D315
+:100D0000940040047F0180027F00E50AC394014003
+:100D1000047E0180027E00EF5E6003121DD7E57F36
+:100D2000C394114014120E047583D2E04480F0E5A0
+:100D3000E420E70F121DD7800A120E047583D2E05B
+:100D4000547FF0121D2322748A850882F583E517EB
+:100D5000F0120E3AE4F0900702E0120E177583903D
+:100D6000EFF07492FEE5084407FFF5828E83E054AD
+:100D7000C0FD900703E0543F4D8F828E83F09007B3
+:100D800004E0120E17758382EFF0900705E0FFED87
+:100D90004407F5827583B4EF120E03758380E05427
+:100DA000BFF030370A120E91758394E04480F03022
+:100DB000380A120E91758392E04480F0E52830E401
+:100DC0001A20390A120E04758388E0547FF0203A05
+:100DD0000A120E04758388E054BFF0748CFE120E64
+:100DE000048E83E0540F120E03758386E054BFF027
+:100DF000E5084406120DFD75838AE4F022F582753C
+:100E00008382E4F0E5084407F582228E83E0F51042
+:100E100054FEF0E5104401FFE508FDED4407F582BE
+:100E200022E515C45407FFE508FDED4408F5827579
+:100E3000838222758380E04440F0E5084408F5820F
+:100E400075838A22E51625E025E024AFF582E43497
+:100E50001AF583E493F50D2243E11043E18053E159
+:100E6000FD85E11022E51625E025E024B2F582E4B7
+:100E7000341AF583E49322855582855483E515F071
+:100E800022E5E25420D3940022E5E25440D39400BA
+:100E900022E5084406F58222FDE508FBEB4407F550
+:100EA000822253F9F775FE3022EF4E70261207CCDE
+:100EB000E0FD90072612077B1207D8E0FD90072877
+:100EC00012077B120881120772120835E09007247E
+:100ED000120778EF64044E70291207E4E0FD9007D2
+:100EE0002612077B1207F0E0FD90072812077B12FD
+:100EF000088B120772120841E0541FFD900724125C
+:100F0000077BEF64014E70047D0180027D00EF6479
+:100F1000024E70047F0180027F00EF4D60351207A2
+:100F2000FCE0FF900726120789EFF0120808E0FFA7
+:100F3000900728120789EFF012084DE0541FFF12A6
+:100F40000786EFF0120859E0541FFF90072412079C
+:100F500089EFF022E4F553120E8140047F018002F4
+:100F60007F00120E8940047E0180027E00EE4F70E9
+:100F700003020FF685E11043E10253E10F85E11012
+:100F8000E4F551E5E3543FF552120E89401DAD5290
+:100F9000AF51121118EF600885E11043E140800B5A
+:100FA00053E1BF120E5812000680FBE5E3543FF5F3
+:100FB00051E5E4543FF552120E81401DAD52AF5140
+:100FC000121118EF600885E11043E120800B53E116
+:100FD000DF120E5812000680FB120E8140047F01C2
+:100FE00080027F00120E8940047E0180027E00EEA6
+:100FF0004F6003120E5B22120E21EFF012109122AD
+:1010000002110002104002109000000000000000D9
+:1010100001200120E4F5571216BD121644E4121007
+:10102000561214B7900726120735E4120731E4F080
+:101030001210561214B7900726120735E541120711
+:1010400031E540F0AF577E00AD567C00120444AF4E
+:10105000567E000211EEFF900720A3E0FDE4F55656
+:10106000F540FEFCAB56FA1211517F0F7D18E4F5E6
+:1010700056F540FEFCAB56FA121541AF567E0012F3
+:101080001AFFE4FFF5567D1FF540FEFCAB56FA2231
+:1010900022E4F555E508FD74A0F556ED4407F55733
+:1010A000E52830E503D38001C340057F28EF8004A5
+:1010B0007F14EFC313F554E4F9120E1875838EE014
+:1010C000F510CEEFCEEED394004026E51054FE127C
+:1010D0000E9875838EEDF0E5104401FDEB4407F5A5
+:1010E00082EDF0855782855683E030E301091E804A
+:1010F000D4C234E9C395544002D2342202000622FD
+:10110000303011901000E493F510901010E493F536
+:101110001012109012115022E4FCC3ED9FFAEFF56B
+:101120008375820079FFE493CC6CCCA3D9F8DAF60E
+:10113000E5E230E4028CE5ED24FFFFEF7582FFF578
+:1011400083E4936C70037F01227F00222211000050
+:10115000228E588F598C5A8D5B8A5C8B5D755E012F
+:10116000E4F55FF560F56212072A7583D0E0FFC4ED
+:10117000540FF561121EA585595ED3E55E955BE5BA
+:101180005A12076B504B1207037583BCE0455E1281
+:1011900007297583BEE0455E1207297583C0E045C7
+:1011A0005EF0AF5FE560120878120AFFAF627E0062
+:1011B000AD5DAC5C120444E561AF5E7E00B4030536
+:1011C000121E218007AD5DAC5C121317055E021183
+:1011D0007A1207037583BCE045401207297583BE68
+:1011E000E045401207297583C0E04540F0228E5843
+:1011F0008F59755A017901755B01E4FB12072A7555
+:1012000083AEE0541AFF120865E0C4135407FEEFE2
+:10121000700CEE6535700790072FE0B4010DAF3507
+:101220007E00120EA9CFEBCF021E60E55964024585
+:101230005870047F0180027F00E559455870047E94
+:101240000180027E00EE4F602385414985404BE5D9
+:10125000594558702CAF5AFECDE9CDFCAB59AA5870
+:10126000120AFFAF5B7E00121E608015AF5B7E002E
+:10127000121E60900726120735E549120731E54B2B
+:10128000F0E4FDAF35FEFC120915228C648D651269
+:1012900008DA403CE56545647010120904C3E53E78
+:1012A000120769403B1208958018E53EC395384007
+:1012B0001D853E38E53E6005853F39800385393917
+:1012C0008F3A1207A8E53E120753E53FF022803B14
+:1012D000E5654564701112075F400512089E801F86
+:1012E00012073EE541F022E53CC39538401D853CA0
+:1012F00038E53C6005853D3980038539398F3A12E0
+:1013000007A8E53C120753E53DF02212079FE53898
+:10131000120753E539F0228C638D641208DA403CE1
+:10132000E56445637010120904C3E53E1207694085
+:101330003B1208958018E53EC39538401D853E3820
+:10134000E53E6005853F3980038539398F3A1207BC
+:10135000A8E53E120753E53FF022803BE564456374
+:10136000701112075F400512089E801F12073EE5AC
+:1013700041F022E53CC39538401D853C38E53C6092
+:1013800005853D3980038539398F3A1207A8E53C38
+:10139000120753E53DF02212079FE538120753E587
+:1013A00039F022E50DFEE5088E544405F555751516
+:1013B0000FF582120E7A1217A320310575150380DE
+:1013C0000375150BE50AC39401503812142020311F
+:1013D0000605150515800415151515E50AC39401B4
+:1013E0005021121420203104051580021515E50A3C
+:1013F000C39401500E120E771217A3203105051564
+:10140000120E77E515B408047F0180027F00E51510
+:10141000B407047E0180027E00EE4F6002057F2249
+:10142000855582855483E515F01217A32212072AE9
+:101430007583AE74FF120729E0541AF534E0C41323
+:101440005407F53524FE602424FE603C24047063B8
+:1014500075312DE508FD74B612079274BC90072211
+:1014600012079574901207B37492803C75313AE577
+:1014700008FD74BA12079274C09007221207B6745E
+:10148000C41207B374C88020753135E508FD74B8FF
+:1014900012079274BEFFED4407900722CFF0A3EF2E
+:1014A000F074C21207B374C6FFED4407A3CFF0A3D4
+:1014B000EFF022753401228E588F598C5A8D5B8A39
+:1014C0005C8B5D755E01E4F55F121EA585595ED3E8
+:1014D000E55E955BE55A12076B5057E55D455C701C
+:1014E0003012072A758392E55E1207297583C6E5D7
+:1014F0005E1207297583C8E55E120729758390E59A
+:101500005E1207297583C2E55E1207297583C480C0
+:1015100003120732E55EF0AF5F7E00AD5DAC5C129A
+:101520000444AF5E7E00AD5DAC5C120BD1055E0283
+:1015300014CFAB5DAA5CAD5BAC5AAF59AE58021B81
+:10154000FB8C5C8D5D8A5E8B5F756001E4F561F5F7
+:1015500062F563121EA58F60D3E560955DE55C12B0
+:10156000076B5061E55F455E702712072A7583B6E9
+:10157000E5601207297583B8E5601207297583BAFB
+:10158000E560F0AF617E00E56212087A120AFF8022
+:1015900019900724120735E56012072975838EE438
+:1015A0001207297401120729E4F0AF637E00AD5FD2
+:1015B000AC5E120444AF607E00AD5FAC5E12128B75
+:1015C00005600215582290114DE49390072EF012F9
+:1015D000081F7583AEE0541AF5347067EF4407F5C1
+:1015E000827583CEE0FF1313135407F536540FD3DF
+:1015F0009400400612142D121BA9E536540F24FE48
+:10160000600C14600C146019240370378010021EE3
+:1016100091121E9112072A7583CEE054EFF0021D3D
+:10162000AE121014E4F555121D850555E555C39409
+:101630000540F412072A7583CEE054C7120729E04B
+:101640004408F022E4F558F559AF08EF4407F58255
+:101650007583D0E0FDC4540FF55AEF4407F5827549
+:1016600083807401F0120821758382E545F0EF4410
+:1016700007F58275838A74FFF0121A4D12072A75D6
+:1016800083BCE054EF1207297583BEE054EF1207C4
+:10169000297583C0E054EF1207297583BCE044101C
+:1016A0001207297583BEE044101207297583C0E034
+:1016B0004410F0AF58E559120878020AFFE4F558D3
+:1016C0007D01F559AF35FEFC12091512072A758305
+:1016D000B674101207297583B87410120729758320
+:1016E000BA74101207297583BC7410120729758308
+:1016F000BE74101207297583C074101207297583F0
+:1017000090E41207297583C2E41207297583C4E4A3
+:10171000120729758392E41207297583C6E412071C
+:10172000297583C8E4F0AF58FEE55912087A020A19
+:10173000FFE5E230E46CE5E754C064407064E5091D
+:10174000C45430FEE50825E025E054C04EFEEF54B9
+:101750003F4EFDE52BAE2A7802C333CE33CED8F907
+:10176000F5828E83EDF0E52BAE2A7802C333CE33BB
+:10177000CED8F9FFF5828E83A3E5FEF08F828E83AB
+:10178000A3A3E5FDF08F828E83A3A3A3E5FCF0C3A2
+:10179000E52B94FAE52A94005008052BE52B7002FE
+:1017A000052A22E4FFE4F558F556F5577482FC1239
+:1017B0000E048C83E0F510547FF0E5104480120E87
+:1017C00098EDF07E0A120E047583A0E020E026DE7C
+:1017D000F40557E55770020556E5142401FDE4337E
+:1017E000FCD3E5579DE5569C40D9E50A942050026C
+:1017F000050A43E108C231120E047583A6E05512B2
+:1018000065127003D23122C23122900726E0FAA37A
+:10181000E0F5828A83E0F541E539C395414026E54C
+:10182000399541C39FEE12076B40047C0180027C16
+:1018300000E541643F60047B0180027B00EC5B605B
+:101840002905418028C3E5419539C39FEE12076BF6
+:1018500040047F0180027F00E54160047E01800238
+:101860007E00EF5E600415418003853941853A4072
+:1018700022E5E230E460E5E130E25BE50970047FF7
+:101880000180027F00E50870047E0180027E00EE88
+:101890005F604353F9F8E5E230E43BE5E130E22EE6
+:1018A00043FA0253FAFBE4F510909470E510F0E56A
+:1018B000E130E2E7909470E06510600343FA0405BC
+:1018C00010909470E510F070E612000680E153FA73
+:1018D000FD53FAFB80C0228F54120006E5E130E090
+:1018E000047F0180027F00E57ED3940540047E01E1
+:1018F00080027E00EE4F603D855411E5E220E1322A
+:1019000074CE121A0530E7047D0180027D008F82BB
+:101910008E83E030E6047F0180027F00EF5D70156A
+:101920001215C674CE121A0530E607E04480F04363
+:10193000F98012187122120E44E51625E025E024E4
+:10194000B0F582E4341AF583E493F50FE51625E04B
+:1019500025E024B1F582E4341AF583E493F50E1200
+:101960000E65F510E50F54F0120E1775838CEFF02D
+:10197000E50F30E00C120E04758386E04440F080E1
+:101980000A120E04758386E054BFF0120E9175831F
+:1019900082E50EF0227F05121731120E04120E336B
+:1019A0007402F0748EFE120E04120E0BEFF0751519
+:1019B00070120FF72034057515108003751550123D
+:1019C0000FF72034047410800274F02515F51512F9
+:1019D0000E21EFF0121091203417E5156430600CE1
+:1019E00074102515F515B48003E4F515120E21EFDA
+:1019F000F022F0E50B25E025E02482F582E43407AF
+:101A0000F583227488FEE5084407FFF5828E83E0A3
+:101A100022F0E5084407F58222F0E054C08F828E60
+:101A200083F022EF4407F582758386E05410D39447
+:101A30000022F0900715E004F0224406F582758339
+:101A40009EE022FEEF4407F5828E83E022E49007B9
+:101A50002AF0A3F012072A758382E0547F12072927
+:101A6000E04480F01210FC12081F7583A0E020E013
+:101A70001A90072BE004F0700690072AE004F0901B
+:101A8000072AE0B410E1A3E0B400DCEE44A6FCEFCA
+:101A90004407F5828C83E0F532EE44A8FEEF44075C
+:101AA000F5828E83E0F5332201201100042000909E
+:101AB00000200F9200210F9400220F9600230F9810
+:101AC00000240F9A00250F9C00260F9E00270FA0D0
+:101AD000012001A2012101A4012201A6012301A8E4
+:101AE000012401AA012501AC012601AE012701B0A4
+:101AF000012801B400280FB640280FB8612801CB97
+:101B0000EFCBCAEECA7F01E4FDEB4A7024E508F58D
+:101B10008274B6120829E508F58274B8120829E51E
+:101B200008F58274BA1208297E007C00120AFF8030
+:101B300012900726120735E541F090072412073569
+:101B4000E540F012072A75838EE41207297401120A
+:101B50000729E4F022E4F526F52753E1FEF52A757E
+:101B60002B01F5087F0112173130301C901AA9E4BF
+:101B700093F510901FF9E493F510900041E493F56C
+:101B800010901ECAE493F5107F02121731120F5401
+:101B90007F03121731120006E5E230E70912100048
+:101BA00030300312110002004712081F7583D0E085
+:101BB000C4540FFD7543017544FF1208AA7404F064
+:101BC000753B01ED14600C14600B14600F2403705E
+:101BD0000B800980001208A704F080061208A77481
+:101BE00004F0EE4482FEEF4407F5828E83E5451251
+:101BF00008BE758382E531F002114C8E608F611250
+:101C00001EA5E4FFCEEDCEEED39561E56012076B25
+:101C1000403974202EF582E43403F583E07003FF2D
+:101C200080261208E2FDC39F401ECFEDCFEB4A7025
+:101C30000B8D421208EEF5418E40800C1208E2F541
+:101C4000381208EEF5398E3A1E80BC22755801E52F
+:101C500035700C1207CCE0F54A1207D8E0F54CE5D8
+:101C600035B4040C1207E4E0F54A1207F0E0F54C35
+:101C7000E535B401047F0180027F00E535B402043C
+:101C80007E0180027E00EE4F600C1207FCE0F54AF8
+:101C9000120808E0F54C85414985404B22755B01EF
+:101CA000900724120735E0541FFFD3940250048F8D
+:101CB000588005EF24FEF558EFC394184005755978
+:101CC000188004EF04F55985435AAF587E00AD598A
+:101CD0007C00AB5B7A00121541AF5A7E0012180AE5
+:101CE000AF5B7E00021AFFE5E230E70E121003C27E
+:101CF000303030031210FF203328E5E730E70512BB
+:101D00000EA2800DE5FEC394205006120EA243F9E8
+:101D100008E5F230E70353F97FE5F15470D39400FE
+:101D200050D822120E04758380E4F0E508440712AF
+:101D30000DFD758384120E02758386120E02758363
+:101D40008CE054F3120E0375838E120E0275839489
+:101D5000E054FBF02212072A75838EE412072974DF
+:101D600001120729E41208BE75838CE04420120892
+:101D7000BEE054DFF07484850882F583E0547FF080
+:101D8000E04480F022755601E4FDF557AF35FEFCC6
+:101D9000120915121C9D121E7A121C4CAF577E00A0
+:101DA000AD567C00120444AF567E000211EE75560B
+:101DB00001E4FDF557AF35FEFC120915121C9D120A
+:101DC0001E7A121C4CAF577E00AD567C00120444A4
+:101DD000AF567E000211EEE4F516120E44FEE50841
+:101DE0004405FF120E658F828E83F00516E516C33B
+:101DF000941440E6E508120E2BE4F022E4F558F5C1
+:101E000059F55AFFFEAD58FC1209157F047E00AD4E
+:101E1000587C001209157F027E00AD587C00020933
+:101E200015E53C253EFCE5422400FBE433FAECC317
+:101E30009BEA12076B400B8C42E53D253FF5418F35
+:101E4000402212090B227484F5188508198519821D
+:101E5000851883E0547FF0E04480F0E04480F02275
+:101E6000EF4E700B12072A7583D2E054DFF0221276
+:101E7000072A7583D2E04420F02275580190072686
+:101E8000120735E0543FF541120732E0543FF54068
+:101E900022755602E4F557121DFCAF577E00AD5671
+:101EA0007C00020444E4F542F541F540F538F5398B
+:101EB000F53A22EF5407FFE5F954F84FF5F9227F80
+:101EC00001E4FE0F0EBEFFFB2201200001042000F2
+:101ED0000000000000000000000000000000000002
+:101EE00000000000000000000000000000000000F2
+:101EF00000000000000000000000000000000000E2
+:101F000000000000000000000000000000000000D1
+:101F100000000000000000000000000000000000C1
+:101F200000000000000000000000000000000000B1
+:101F300000000000000000000000000000000000A1
+:101F40000000000000000000000000000000000091
+:101F50000000000000000000000000000000000081
+:101F60000000000000000000000000000000000071
+:101F70000000000000000000000000000000000061
+:101F80000000000000000000000000000000000051
+:101F90000000000000000000000000000000000041
+:101FA0000000000000000000000000000000000031
+:101FB0000000000000000000000000000000000021
+:101FC0000000000000000000000000000000000011
+:101FD0000000000000000000000000000000000001
+:101FE00000000000000000000000000000000000F1
+:101FF000000000000000000001201100042000810A
+:00000001FF
diff --git a/fs/9p/Makefile b/fs/9p/Makefile
index 1a940ec..91fba02 100644
--- a/fs/9p/Makefile
+++ b/fs/9p/Makefile
@@ -8,6 +8,8 @@
 	vfs_dir.o \
 	vfs_dentry.o \
 	v9fs.o \
-	fid.o
+	fid.o  \
+	xattr.o \
+	xattr_user.o
 
 9p-$(CONFIG_9P_FSCACHE) += cache.o
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index 7317b39b2..3585636 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -97,6 +97,34 @@
 	return ret;
 }
 
+/*
+ * We need to hold v9ses->rename_sem as long as we hold references
+ * to returned path array. Array element contain pointers to
+ * dentry names.
+ */
+static int build_path_from_dentry(struct v9fs_session_info *v9ses,
+				  struct dentry *dentry, char ***names)
+{
+	int n = 0, i;
+	char **wnames;
+	struct dentry *ds;
+
+	for (ds = dentry; !IS_ROOT(ds); ds = ds->d_parent)
+		n++;
+
+	wnames = kmalloc(sizeof(char *) * n, GFP_KERNEL);
+	if (!wnames)
+		goto err_out;
+
+	for (ds = dentry, i = (n-1); i >= 0; i--, ds = ds->d_parent)
+		wnames[i] = (char  *)ds->d_name.name;
+
+	*names = wnames;
+	return n;
+err_out:
+	return -ENOMEM;
+}
+
 /**
  * v9fs_fid_lookup - lookup for a fid, try to walk if not found
  * @dentry: dentry to look for fid in
@@ -112,7 +140,7 @@
 	int i, n, l, clone, any, access;
 	u32 uid;
 	struct p9_fid *fid, *old_fid = NULL;
-	struct dentry *d, *ds;
+	struct dentry *ds;
 	struct v9fs_session_info *v9ses;
 	char **wnames, *uname;
 
@@ -139,49 +167,62 @@
 	fid = v9fs_fid_find(dentry, uid, any);
 	if (fid)
 		return fid;
-
+	/*
+	 * we don't have a matching fid. To do a TWALK we need
+	 * parent fid. We need to prevent rename when we want to
+	 * look at the parent.
+	 */
+	down_read(&v9ses->rename_sem);
 	ds = dentry->d_parent;
 	fid = v9fs_fid_find(ds, uid, any);
-	if (!fid) { /* walk from the root */
-		n = 0;
-		for (ds = dentry; !IS_ROOT(ds); ds = ds->d_parent)
-			n++;
+	if (fid) {
+		/* Found the parent fid do a lookup with that */
+		fid = p9_client_walk(fid, 1, (char **)&dentry->d_name.name, 1);
+		goto fid_out;
+	}
+	up_read(&v9ses->rename_sem);
 
-		fid = v9fs_fid_find(ds, uid, any);
-		if (!fid) { /* the user is not attached to the fs yet */
-			if (access == V9FS_ACCESS_SINGLE)
-				return ERR_PTR(-EPERM);
+	/* start from the root and try to do a lookup */
+	fid = v9fs_fid_find(dentry->d_sb->s_root, uid, any);
+	if (!fid) {
+		/* the user is not attached to the fs yet */
+		if (access == V9FS_ACCESS_SINGLE)
+			return ERR_PTR(-EPERM);
 
-			if (v9fs_proto_dotu(v9ses))
+		if (v9fs_proto_dotu(v9ses) || v9fs_proto_dotl(v9ses))
 				uname = NULL;
-			else
-				uname = v9ses->uname;
+		else
+			uname = v9ses->uname;
 
-			fid = p9_client_attach(v9ses->clnt, NULL, uname, uid,
-				v9ses->aname);
+		fid = p9_client_attach(v9ses->clnt, NULL, uname, uid,
+				       v9ses->aname);
+		if (IS_ERR(fid))
+			return fid;
 
-			if (IS_ERR(fid))
-				return fid;
-
-			v9fs_fid_add(ds, fid);
-		}
-	} else /* walk from the parent */
-		n = 1;
-
-	if (ds == dentry)
+		v9fs_fid_add(dentry->d_sb->s_root, fid);
+	}
+	/* If we are root ourself just return that */
+	if (dentry->d_sb->s_root == dentry)
 		return fid;
-
-	wnames = kmalloc(sizeof(char *) * n, GFP_KERNEL);
-	if (!wnames)
-		return ERR_PTR(-ENOMEM);
-
-	for (d = dentry, i = (n-1); i >= 0; i--, d = d->d_parent)
-		wnames[i] = (char *) d->d_name.name;
-
+	/*
+	 * Do a multipath walk with attached root.
+	 * When walking parent we need to make sure we
+	 * don't have a parallel rename happening
+	 */
+	down_read(&v9ses->rename_sem);
+	n  = build_path_from_dentry(v9ses, dentry, &wnames);
+	if (n < 0) {
+		fid = ERR_PTR(n);
+		goto err_out;
+	}
 	clone = 1;
 	i = 0;
 	while (i < n) {
 		l = min(n - i, P9_MAXWELEM);
+		/*
+		 * We need to hold rename lock when doing a multipath
+		 * walk to ensure none of the patch component change
+		 */
 		fid = p9_client_walk(fid, l, &wnames[i], clone);
 		if (IS_ERR(fid)) {
 			if (old_fid) {
@@ -193,15 +234,17 @@
 				p9_client_clunk(old_fid);
 			}
 			kfree(wnames);
-			return fid;
+			goto err_out;
 		}
 		old_fid = fid;
 		i += l;
 		clone = 0;
 	}
-
 	kfree(wnames);
+fid_out:
 	v9fs_fid_add(dentry, fid);
+err_out:
+	up_read(&v9ses->rename_sem);
 	return fid;
 }
 
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index f8b86e9..38dc0e0 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -237,6 +237,7 @@
 		__putname(v9ses->uname);
 		return ERR_PTR(-ENOMEM);
 	}
+	init_rwsem(&v9ses->rename_sem);
 
 	rc = bdi_setup_and_register(&v9ses->bdi, "9p", BDI_CAP_MAP_COPY);
 	if (rc) {
@@ -278,7 +279,7 @@
 	v9ses->maxdata = v9ses->clnt->msize - P9_IOHDRSZ;
 
 	/* for legacy mode, fall back to V9FS_ACCESS_ANY */
-	if (!v9fs_proto_dotu(v9ses) &&
+	if (!(v9fs_proto_dotu(v9ses) || v9fs_proto_dotl(v9ses)) &&
 		((v9ses->flags&V9FS_ACCESS_MASK) == V9FS_ACCESS_USER)) {
 
 		v9ses->flags &= ~V9FS_ACCESS_MASK;
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index bec4d0b..4c963c9 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -104,6 +104,7 @@
 	struct p9_client *clnt;	/* 9p client */
 	struct list_head slist; /* list of sessions registered with v9fs */
 	struct backing_dev_info bdi;
+	struct rw_semaphore rename_sem;
 };
 
 struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 32ef400..f47c6bb 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -55,6 +55,7 @@
 void v9fs_clear_inode(struct inode *inode);
 ino_t v9fs_qid2ino(struct p9_qid *qid);
 void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
+void v9fs_stat2inode_dotl(struct p9_stat_dotl *, struct inode *);
 int v9fs_dir_release(struct inode *inode, struct file *filp);
 int v9fs_file_open(struct inode *inode, struct file *file);
 void v9fs_inode2stat(struct inode *inode, struct p9_wstat *stat);
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index d61e3b2..16c8a2a 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -87,6 +87,42 @@
 }
 
 /**
+ * v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
+ * @filp: opened file structure
+ * @buflen: Length in bytes of buffer to allocate
+ *
+ */
+
+static int v9fs_alloc_rdir_buf(struct file *filp, int buflen)
+{
+	struct p9_rdir *rdir;
+	struct p9_fid *fid;
+	int err = 0;
+
+	fid = filp->private_data;
+	if (!fid->rdir) {
+		rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL);
+
+		if (rdir == NULL) {
+			err = -ENOMEM;
+			goto exit;
+		}
+		spin_lock(&filp->f_dentry->d_lock);
+		if (!fid->rdir) {
+			rdir->buf = (uint8_t *)rdir + sizeof(struct p9_rdir);
+			mutex_init(&rdir->mutex);
+			rdir->head = rdir->tail = 0;
+			fid->rdir = (void *) rdir;
+			rdir = NULL;
+		}
+		spin_unlock(&filp->f_dentry->d_lock);
+		kfree(rdir);
+	}
+exit:
+	return err;
+}
+
+/**
  * v9fs_dir_readdir - read a directory
  * @filp: opened file structure
  * @dirent: directory structure ???
@@ -109,25 +145,9 @@
 
 	buflen = fid->clnt->msize - P9_IOHDRSZ;
 
-	/* allocate rdir on demand */
-	if (!fid->rdir) {
-		rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL);
-
-		if (rdir == NULL) {
-			err = -ENOMEM;
-			goto exit;
-		}
-		spin_lock(&filp->f_dentry->d_lock);
-		if (!fid->rdir) {
-			rdir->buf = (uint8_t *)rdir + sizeof(struct p9_rdir);
-			mutex_init(&rdir->mutex);
-			rdir->head = rdir->tail = 0;
-			fid->rdir = (void *) rdir;
-			rdir = NULL;
-		}
-		spin_unlock(&filp->f_dentry->d_lock);
-		kfree(rdir);
-	}
+	err = v9fs_alloc_rdir_buf(filp, buflen);
+	if (err)
+		goto exit;
 	rdir = (struct p9_rdir *) fid->rdir;
 
 	err = mutex_lock_interruptible(&rdir->mutex);
@@ -146,7 +166,7 @@
 		while (rdir->head < rdir->tail) {
 			p9stat_init(&st);
 			err = p9stat_read(rdir->buf + rdir->head,
-						buflen - rdir->head, &st,
+						rdir->tail - rdir->head, &st,
 						fid->clnt->proto_version);
 			if (err) {
 				P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
@@ -176,6 +196,88 @@
 	return err;
 }
 
+/**
+ * v9fs_dir_readdir_dotl - read a directory
+ * @filp: opened file structure
+ * @dirent: buffer to fill dirent structures
+ * @filldir: function to populate dirent structures
+ *
+ */
+static int v9fs_dir_readdir_dotl(struct file *filp, void *dirent,
+						filldir_t filldir)
+{
+	int over;
+	int err = 0;
+	struct p9_fid *fid;
+	int buflen;
+	struct p9_rdir *rdir;
+	struct p9_dirent curdirent;
+	u64 oldoffset = 0;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
+	fid = filp->private_data;
+
+	buflen = fid->clnt->msize - P9_READDIRHDRSZ;
+
+	err = v9fs_alloc_rdir_buf(filp, buflen);
+	if (err)
+		goto exit;
+	rdir = (struct p9_rdir *) fid->rdir;
+
+	err = mutex_lock_interruptible(&rdir->mutex);
+	if (err)
+		return err;
+
+	while (err == 0) {
+		if (rdir->tail == rdir->head) {
+			err = p9_client_readdir(fid, rdir->buf, buflen,
+								filp->f_pos);
+			if (err <= 0)
+				goto unlock_and_exit;
+
+			rdir->head = 0;
+			rdir->tail = err;
+		}
+
+		while (rdir->head < rdir->tail) {
+
+			err = p9dirent_read(rdir->buf + rdir->head,
+						buflen - rdir->head, &curdirent,
+						fid->clnt->proto_version);
+			if (err < 0) {
+				P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
+				err = -EIO;
+				goto unlock_and_exit;
+			}
+
+			/* d_off in dirent structure tracks the offset into
+			 * the next dirent in the dir. However, filldir()
+			 * expects offset into the current dirent. Hence
+			 * while calling filldir send the offset from the
+			 * previous dirent structure.
+			 */
+			over = filldir(dirent, curdirent.d_name,
+					strlen(curdirent.d_name),
+					oldoffset, v9fs_qid2ino(&curdirent.qid),
+					curdirent.d_type);
+			oldoffset = curdirent.d_off;
+
+			if (over) {
+				err = 0;
+				goto unlock_and_exit;
+			}
+
+			filp->f_pos = curdirent.d_off;
+			rdir->head += err;
+		}
+	}
+
+unlock_and_exit:
+	mutex_unlock(&rdir->mutex);
+exit:
+	return err;
+}
+
 
 /**
  * v9fs_dir_release - close a directory
@@ -207,7 +309,7 @@
 const struct file_operations v9fs_dir_operations_dotl = {
 	.read = generic_read_dir,
 	.llseek = generic_file_llseek,
-	.readdir = v9fs_dir_readdir,
+	.readdir = v9fs_dir_readdir_dotl,
 	.open = v9fs_file_open,
 	.release = v9fs_dir_release,
 };
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 2bedc6c..e97c92b 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -59,9 +59,13 @@
 	struct p9_fid *fid;
 	int omode;
 
-	P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p \n", inode, file);
+	P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p\n", inode, file);
 	v9ses = v9fs_inode2v9ses(inode);
-	omode = v9fs_uflags2omode(file->f_flags, v9fs_proto_dotu(v9ses));
+	if (v9fs_proto_dotl(v9ses))
+		omode = file->f_flags;
+	else
+		omode = v9fs_uflags2omode(file->f_flags,
+					v9fs_proto_dotu(v9ses));
 	fid = file->private_data;
 	if (!fid) {
 		fid = v9fs_fid_clone(file->f_path.dentry);
@@ -73,11 +77,12 @@
 			p9_client_clunk(fid);
 			return err;
 		}
-		if (omode & P9_OTRUNC) {
+		if (file->f_flags & O_TRUNC) {
 			i_size_write(inode, 0);
 			inode->i_blocks = 0;
 		}
-		if ((file->f_flags & O_APPEND) && (!v9fs_proto_dotu(v9ses)))
+		if ((file->f_flags & O_APPEND) &&
+			(!v9fs_proto_dotu(v9ses) && !v9fs_proto_dotl(v9ses)))
 			generic_file_llseek(file, 0, SEEK_END);
 	}
 
@@ -139,7 +144,7 @@
 v9fs_file_readn(struct file *filp, char *data, char __user *udata, u32 count,
 	       u64 offset)
 {
-	int n, total;
+	int n, total, size;
 	struct p9_fid *fid = filp->private_data;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "fid %d offset %llu count %d\n", fid->fid,
@@ -147,6 +152,7 @@
 
 	n = 0;
 	total = 0;
+	size = fid->iounit ? fid->iounit : fid->clnt->msize - P9_IOHDRSZ;
 	do {
 		n = p9_client_read(fid, data, udata, offset, count);
 		if (n <= 0)
@@ -160,7 +166,7 @@
 		offset += n;
 		count -= n;
 		total += n;
-	} while (count > 0 && n == (fid->clnt->msize - P9_IOHDRSZ));
+	} while (count > 0 && n == size);
 
 	if (n < 0)
 		total = n;
@@ -183,11 +189,13 @@
 {
 	int ret;
 	struct p9_fid *fid;
+	size_t size;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "count %zu offset %lld\n", count, *offset);
 	fid = filp->private_data;
 
-	if (count > (fid->clnt->msize - P9_IOHDRSZ))
+	size = fid->iounit ? fid->iounit : fid->clnt->msize - P9_IOHDRSZ;
+	if (count > size)
 		ret = v9fs_file_readn(filp, NULL, udata, count, *offset);
 	else
 		ret = p9_client_read(fid, NULL, udata, *offset, count);
@@ -224,9 +232,7 @@
 	fid = filp->private_data;
 	clnt = fid->clnt;
 
-	rsize = fid->iounit;
-	if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
-		rsize = clnt->msize - P9_IOHDRSZ;
+	rsize = fid->iounit ? fid->iounit : clnt->msize - P9_IOHDRSZ;
 
 	do {
 		if (count < rsize)
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 4331b3b..6e94f32 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -35,6 +35,7 @@
 #include <linux/idr.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/xattr.h>
 #include <net/9p/9p.h>
 #include <net/9p/client.h>
 
@@ -42,6 +43,7 @@
 #include "v9fs_vfs.h"
 #include "fid.h"
 #include "cache.h"
+#include "xattr.h"
 
 static const struct inode_operations v9fs_dir_inode_operations;
 static const struct inode_operations v9fs_dir_inode_operations_dotu;
@@ -236,6 +238,41 @@
 #endif
 
 /**
+ * v9fs_get_fsgid_for_create - Helper function to get the gid for creating a
+ * new file system object. This checks the S_ISGID to determine the owning
+ * group of the new file system object.
+ */
+
+static gid_t v9fs_get_fsgid_for_create(struct inode *dir_inode)
+{
+	BUG_ON(dir_inode == NULL);
+
+	if (dir_inode->i_mode & S_ISGID) {
+		/* set_gid bit is set.*/
+		return dir_inode->i_gid;
+	}
+	return current_fsgid();
+}
+
+/**
+ * v9fs_dentry_from_dir_inode - helper function to get the dentry from
+ * dir inode.
+ *
+ */
+
+static struct dentry *v9fs_dentry_from_dir_inode(struct inode *inode)
+{
+	struct dentry *dentry;
+
+	spin_lock(&dcache_lock);
+	/* Directory should have only one entry. */
+	BUG_ON(S_ISDIR(inode->i_mode) && !list_is_singular(&inode->i_dentry));
+	dentry = list_entry(inode->i_dentry.next, struct dentry, d_alias);
+	spin_unlock(&dcache_lock);
+	return dentry;
+}
+
+/**
  * v9fs_get_inode - helper function to setup an inode
  * @sb: superblock
  * @mode: mode to setup inode with
@@ -267,7 +304,13 @@
 	case S_IFBLK:
 	case S_IFCHR:
 	case S_IFSOCK:
-		if (!v9fs_proto_dotu(v9ses)) {
+		if (v9fs_proto_dotl(v9ses)) {
+			inode->i_op = &v9fs_file_inode_operations_dotl;
+			inode->i_fop = &v9fs_file_operations_dotl;
+		} else if (v9fs_proto_dotu(v9ses)) {
+			inode->i_op = &v9fs_file_inode_operations;
+			inode->i_fop = &v9fs_file_operations;
+		} else {
 			P9_DPRINTK(P9_DEBUG_ERROR,
 				   "special files without extended mode\n");
 			err = -EINVAL;
@@ -396,23 +439,14 @@
 #endif
 }
 
-/**
- * v9fs_inode_from_fid - populate an inode by issuing a attribute request
- * @v9ses: session information
- * @fid: fid to issue attribute request for
- * @sb: superblock on which to create inode
- *
- */
-
 static struct inode *
-v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+v9fs_inode(struct v9fs_session_info *v9ses, struct p9_fid *fid,
 	struct super_block *sb)
 {
 	int err, umode;
-	struct inode *ret;
+	struct inode *ret = NULL;
 	struct p9_wstat *st;
 
-	ret = NULL;
 	st = p9_client_stat(fid);
 	if (IS_ERR(st))
 		return ERR_CAST(st);
@@ -433,15 +467,62 @@
 #endif
 	p9stat_free(st);
 	kfree(st);
-
 	return ret;
-
 error:
 	p9stat_free(st);
 	kfree(st);
 	return ERR_PTR(err);
 }
 
+static struct inode *
+v9fs_inode_dotl(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+	struct super_block *sb)
+{
+	struct inode *ret = NULL;
+	int err;
+	struct p9_stat_dotl *st;
+
+	st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+	if (IS_ERR(st))
+		return ERR_CAST(st);
+
+	ret = v9fs_get_inode(sb, st->st_mode);
+	if (IS_ERR(ret)) {
+		err = PTR_ERR(ret);
+		goto error;
+	}
+
+	v9fs_stat2inode_dotl(st, ret);
+	ret->i_ino = v9fs_qid2ino(&st->qid);
+#ifdef CONFIG_9P_FSCACHE
+	v9fs_vcookie_set_qid(ret, &st->qid);
+	v9fs_cache_inode_get_cookie(ret);
+#endif
+	kfree(st);
+	return ret;
+error:
+	kfree(st);
+	return ERR_PTR(err);
+}
+
+/**
+ * v9fs_inode_from_fid - Helper routine to populate an inode by
+ * issuing a attribute request
+ * @v9ses: session information
+ * @fid: fid to issue attribute request for
+ * @sb: superblock on which to create inode
+ *
+ */
+static inline struct inode *
+v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
+			struct super_block *sb)
+{
+	if (v9fs_proto_dotl(v9ses))
+		return v9fs_inode_dotl(v9ses, fid, sb);
+	else
+		return v9fs_inode(v9ses, fid, sb);
+}
+
 /**
  * v9fs_remove - helper function to remove files and directories
  * @dir: directory inode that is being deleted
@@ -563,6 +644,118 @@
 }
 
 /**
+ * v9fs_vfs_create_dotl - VFS hook to create files for 9P2000.L protocol.
+ * @dir: directory inode that is being created
+ * @dentry:  dentry that is being deleted
+ * @mode: create permissions
+ * @nd: path information
+ *
+ */
+
+static int
+v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int mode,
+		struct nameidata *nd)
+{
+	int err = 0;
+	char *name = NULL;
+	gid_t gid;
+	int flags;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL;
+	struct p9_fid *dfid, *ofid;
+	struct file *filp;
+	struct p9_qid qid;
+	struct inode *inode;
+
+	v9ses = v9fs_inode2v9ses(dir);
+	if (nd && nd->flags & LOOKUP_OPEN)
+		flags = nd->intent.open.flags - 1;
+	else
+		flags = O_RDWR;
+
+	name = (char *) dentry->d_name.name;
+	P9_DPRINTK(P9_DEBUG_VFS, "v9fs_vfs_create_dotl: name:%s flags:0x%x "
+			"mode:0x%x\n", name, flags, mode);
+
+	dfid = v9fs_fid_lookup(dentry->d_parent);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		return err;
+	}
+
+	/* clone a fid to use for creation */
+	ofid = p9_client_walk(dfid, 0, NULL, 1);
+	if (IS_ERR(ofid)) {
+		err = PTR_ERR(ofid);
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
+		return err;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	err = p9_client_create_dotl(ofid, name, flags, mode, gid, &qid);
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS,
+				"p9_client_open_dotl failed in creat %d\n",
+				err);
+		goto error;
+	}
+
+	/* No need to populate the inode if we are not opening the file AND
+	 * not in cached mode.
+	 */
+	if (!v9ses->cache && !(nd && nd->flags & LOOKUP_OPEN)) {
+		/* Not in cached mode. No need to populate inode with stat */
+		dentry->d_op = &v9fs_dentry_operations;
+		p9_client_clunk(ofid);
+		d_instantiate(dentry, NULL);
+		return 0;
+	}
+
+	/* Now walk from the parent so we can get an unopened fid. */
+	fid = p9_client_walk(dfid, 1, &name, 1);
+	if (IS_ERR(fid)) {
+		err = PTR_ERR(fid);
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n", err);
+		fid = NULL;
+		goto error;
+	}
+
+	/* instantiate inode and assign the unopened fid to dentry */
+	inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
+		P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err);
+		goto error;
+	}
+	dentry->d_op = &v9fs_cached_dentry_operations;
+	d_instantiate(dentry, inode);
+	err = v9fs_fid_add(dentry, fid);
+	if (err < 0)
+		goto error;
+
+	/* if we are opening a file, assign the open fid to the file */
+	if (nd && nd->flags & LOOKUP_OPEN) {
+		filp = lookup_instantiate_filp(nd, dentry, v9fs_open_created);
+		if (IS_ERR(filp)) {
+			p9_client_clunk(ofid);
+			return PTR_ERR(filp);
+		}
+		filp->private_data = ofid;
+	} else
+		p9_client_clunk(ofid);
+
+	return 0;
+
+error:
+	if (ofid)
+		p9_client_clunk(ofid);
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
+/**
  * v9fs_vfs_create - VFS hook to create files
  * @dir: directory inode that is being created
  * @dentry:  dentry that is being deleted
@@ -652,6 +845,83 @@
 	return err;
 }
 
+
+/**
+ * v9fs_vfs_mkdir_dotl - VFS mkdir hook to create a directory
+ * @dir:  inode that is being unlinked
+ * @dentry: dentry that is being unlinked
+ * @mode: mode for new directory
+ *
+ */
+
+static int v9fs_vfs_mkdir_dotl(struct inode *dir, struct dentry *dentry,
+					int mode)
+{
+	int err;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL, *dfid = NULL;
+	gid_t gid;
+	char *name;
+	struct inode *inode;
+	struct p9_qid qid;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", dentry->d_name.name);
+	err = 0;
+	v9ses = v9fs_inode2v9ses(dir);
+
+	mode |= S_IFDIR;
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		dfid = NULL;
+		goto error;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_fsgid_for_create failed\n");
+		goto error;
+	}
+
+	name = (char *) dentry->d_name.name;
+	err = p9_client_mkdir_dotl(dfid, name, mode, gid, &qid);
+	if (err < 0)
+		goto error;
+
+	/* instantiate inode and assign the unopened fid to the dentry */
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+				err);
+			fid = NULL;
+			goto error;
+		}
+
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+				err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	}
+error:
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
 /**
  * v9fs_vfs_lookup - VFS lookup hook to "walk" to a new inode
  * @dir:  inode that is being walked from
@@ -678,6 +948,7 @@
 
 	sb = dir->i_sb;
 	v9ses = v9fs_inode2v9ses(dir);
+	/* We can walk d_parent because we hold the dir->i_mutex */
 	dfid = v9fs_fid_lookup(dentry->d_parent);
 	if (IS_ERR(dfid))
 		return ERR_CAST(dfid);
@@ -785,27 +1056,33 @@
 		goto clunk_olddir;
 	}
 
+	down_write(&v9ses->rename_sem);
 	if (v9fs_proto_dotl(v9ses)) {
 		retval = p9_client_rename(oldfid, newdirfid,
 					(char *) new_dentry->d_name.name);
 		if (retval != -ENOSYS)
 			goto clunk_newdir;
 	}
+	if (old_dentry->d_parent != new_dentry->d_parent) {
+		/*
+		 * 9P .u can only handle file rename in the same directory
+		 */
 
-	/* 9P can only handle file rename in the same directory */
-	if (memcmp(&olddirfid->qid, &newdirfid->qid, sizeof(newdirfid->qid))) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 				"old dir and new dir are different\n");
 		retval = -EXDEV;
 		goto clunk_newdir;
 	}
-
 	v9fs_blank_wstat(&wstat);
 	wstat.muid = v9ses->uname;
 	wstat.name = (char *) new_dentry->d_name.name;
 	retval = p9_client_wstat(oldfid, &wstat);
 
 clunk_newdir:
+	if (!retval)
+		/* successful rename */
+		d_move(old_dentry, new_dentry);
+	up_write(&v9ses->rename_sem);
 	p9_client_clunk(newdirfid);
 
 clunk_olddir:
@@ -853,6 +1130,42 @@
 	return 0;
 }
 
+static int
+v9fs_vfs_getattr_dotl(struct vfsmount *mnt, struct dentry *dentry,
+		 struct kstat *stat)
+{
+	int err;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid;
+	struct p9_stat_dotl *st;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "dentry: %p\n", dentry);
+	err = -EPERM;
+	v9ses = v9fs_inode2v9ses(dentry->d_inode);
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
+		return simple_getattr(mnt, dentry, stat);
+
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	/* Ask for all the fields in stat structure. Server will return
+	 * whatever it supports
+	 */
+
+	st = p9_client_getattr_dotl(fid, P9_STATS_ALL);
+	if (IS_ERR(st))
+		return PTR_ERR(st);
+
+	v9fs_stat2inode_dotl(st, dentry->d_inode);
+	generic_fillattr(dentry->d_inode, stat);
+	/* Change block size to what the server returned */
+	stat->blksize = st->st_blksize;
+
+	kfree(st);
+	return 0;
+}
+
 /**
  * v9fs_vfs_setattr - set file metadata
  * @dentry: file whose metadata to set
@@ -903,6 +1216,49 @@
 }
 
 /**
+ * v9fs_vfs_setattr_dotl - set file metadata
+ * @dentry: file whose metadata to set
+ * @iattr: metadata assignment structure
+ *
+ */
+
+static int v9fs_vfs_setattr_dotl(struct dentry *dentry, struct iattr *iattr)
+{
+	int retval;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid;
+	struct p9_iattr_dotl p9attr;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "\n");
+
+	retval = inode_change_ok(dentry->d_inode, iattr);
+	if (retval)
+		return retval;
+
+	p9attr.valid = iattr->ia_valid;
+	p9attr.mode = iattr->ia_mode;
+	p9attr.uid = iattr->ia_uid;
+	p9attr.gid = iattr->ia_gid;
+	p9attr.size = iattr->ia_size;
+	p9attr.atime_sec = iattr->ia_atime.tv_sec;
+	p9attr.atime_nsec = iattr->ia_atime.tv_nsec;
+	p9attr.mtime_sec = iattr->ia_mtime.tv_sec;
+	p9attr.mtime_nsec = iattr->ia_mtime.tv_nsec;
+
+	retval = -EPERM;
+	v9ses = v9fs_inode2v9ses(dentry->d_inode);
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	retval = p9_client_setattr(fid, &p9attr);
+	if (retval >= 0)
+		retval = inode_setattr(dentry->d_inode, iattr);
+
+	return retval;
+}
+
+/**
  * v9fs_stat2inode - populate an inode structure with mistat info
  * @stat: Plan 9 metadata (mistat) structure
  * @inode: inode to populate
@@ -980,6 +1336,77 @@
 }
 
 /**
+ * v9fs_stat2inode_dotl - populate an inode structure with stat info
+ * @stat: stat structure
+ * @inode: inode to populate
+ * @sb: superblock of filesystem
+ *
+ */
+
+void
+v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode)
+{
+
+	if ((stat->st_result_mask & P9_STATS_BASIC) == P9_STATS_BASIC) {
+		inode->i_atime.tv_sec = stat->st_atime_sec;
+		inode->i_atime.tv_nsec = stat->st_atime_nsec;
+		inode->i_mtime.tv_sec = stat->st_mtime_sec;
+		inode->i_mtime.tv_nsec = stat->st_mtime_nsec;
+		inode->i_ctime.tv_sec = stat->st_ctime_sec;
+		inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
+		inode->i_uid = stat->st_uid;
+		inode->i_gid = stat->st_gid;
+		inode->i_nlink = stat->st_nlink;
+		inode->i_mode = stat->st_mode;
+		inode->i_rdev = new_decode_dev(stat->st_rdev);
+
+		if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode)))
+			init_special_inode(inode, inode->i_mode, inode->i_rdev);
+
+		i_size_write(inode, stat->st_size);
+		inode->i_blocks = stat->st_blocks;
+	} else {
+		if (stat->st_result_mask & P9_STATS_ATIME) {
+			inode->i_atime.tv_sec = stat->st_atime_sec;
+			inode->i_atime.tv_nsec = stat->st_atime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_MTIME) {
+			inode->i_mtime.tv_sec = stat->st_mtime_sec;
+			inode->i_mtime.tv_nsec = stat->st_mtime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_CTIME) {
+			inode->i_ctime.tv_sec = stat->st_ctime_sec;
+			inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
+		}
+		if (stat->st_result_mask & P9_STATS_UID)
+			inode->i_uid = stat->st_uid;
+		if (stat->st_result_mask & P9_STATS_GID)
+			inode->i_gid = stat->st_gid;
+		if (stat->st_result_mask & P9_STATS_NLINK)
+			inode->i_nlink = stat->st_nlink;
+		if (stat->st_result_mask & P9_STATS_MODE) {
+			inode->i_mode = stat->st_mode;
+			if ((S_ISBLK(inode->i_mode)) ||
+						(S_ISCHR(inode->i_mode)))
+				init_special_inode(inode, inode->i_mode,
+								inode->i_rdev);
+		}
+		if (stat->st_result_mask & P9_STATS_RDEV)
+			inode->i_rdev = new_decode_dev(stat->st_rdev);
+		if (stat->st_result_mask & P9_STATS_SIZE)
+			i_size_write(inode, stat->st_size);
+		if (stat->st_result_mask & P9_STATS_BLOCKS)
+			inode->i_blocks = stat->st_blocks;
+	}
+	if (stat->st_result_mask & P9_STATS_GEN)
+			inode->i_generation = stat->st_gen;
+
+	/* Currently we don't support P9_STATS_BTIME and P9_STATS_DATA_VERSION
+	 * because the inode structure does not have fields for them.
+	 */
+}
+
+/**
  * v9fs_qid2ino - convert qid into inode number
  * @qid: qid to hash
  *
@@ -1022,7 +1449,7 @@
 	if (IS_ERR(fid))
 		return PTR_ERR(fid);
 
-	if (!v9fs_proto_dotu(v9ses))
+	if (!v9fs_proto_dotu(v9ses) && !v9fs_proto_dotl(v9ses))
 		return -EBADF;
 
 	st = p9_client_stat(fid);
@@ -1128,6 +1555,99 @@
 }
 
 /**
+ * v9fs_vfs_symlink_dotl - helper function to create symlinks
+ * @dir: directory inode containing symlink
+ * @dentry: dentry for symlink
+ * @symname: symlink data
+ *
+ * See Also: 9P2000.L RFC for more information
+ *
+ */
+
+static int
+v9fs_vfs_symlink_dotl(struct inode *dir, struct dentry *dentry,
+		const char *symname)
+{
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *dfid;
+	struct p9_fid *fid = NULL;
+	struct inode *inode;
+	struct p9_qid qid;
+	char *name;
+	int err;
+	gid_t gid;
+
+	name = (char *) dentry->d_name.name;
+	P9_DPRINTK(P9_DEBUG_VFS, "v9fs_vfs_symlink_dotl : %lu,%s,%s\n",
+			dir->i_ino, name, symname);
+	v9ses = v9fs_inode2v9ses(dir);
+
+	dfid = v9fs_fid_lookup(dentry->d_parent);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		return err;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_egid failed %d\n", gid);
+		goto error;
+	}
+
+	/* Server doesn't alter fid on TSYMLINK. Hence no need to clone it. */
+	err = p9_client_symlink(dfid, name, (char *)symname, gid, &qid);
+
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_symlink failed %d\n", err);
+		goto error;
+	}
+
+	if (v9ses->cache) {
+		/* Now walk from the parent so we can get an unopened fid. */
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+					err);
+			fid = NULL;
+			goto error;
+		}
+
+		/* instantiate inode and assign the unopened fid to dentry */
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+					err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	} else {
+		/* Not in cached mode. No need to populate inode with stat */
+		inode = v9fs_get_inode(dir->i_sb, S_IFLNK);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			goto error;
+		}
+		dentry->d_op = &v9fs_dentry_operations;
+		d_instantiate(dentry, inode);
+	}
+
+error:
+	if (fid)
+		p9_client_clunk(fid);
+
+	return err;
+}
+
+/**
  * v9fs_vfs_symlink - helper function to create symlinks
  * @dir: directory inode containing symlink
  * @dentry: dentry for symlink
@@ -1186,6 +1706,76 @@
 }
 
 /**
+ * v9fs_vfs_link_dotl - create a hardlink for dotl
+ * @old_dentry: dentry for file to link to
+ * @dir: inode destination for new link
+ * @dentry: dentry for link
+ *
+ */
+
+static int
+v9fs_vfs_link_dotl(struct dentry *old_dentry, struct inode *dir,
+		struct dentry *dentry)
+{
+	int err;
+	struct p9_fid *dfid, *oldfid;
+	char *name;
+	struct v9fs_session_info *v9ses;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "dir ino: %lu, old_name: %s, new_name: %s\n",
+			dir->i_ino, old_dentry->d_name.name,
+			dentry->d_name.name);
+
+	v9ses = v9fs_inode2v9ses(dir);
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid))
+		return PTR_ERR(dfid);
+
+	oldfid = v9fs_fid_lookup(old_dentry);
+	if (IS_ERR(oldfid))
+		return PTR_ERR(oldfid);
+
+	name = (char *) dentry->d_name.name;
+
+	err = p9_client_link(dfid, oldfid, (char *)dentry->d_name.name);
+
+	if (err < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "p9_client_link failed %d\n", err);
+		return err;
+	}
+
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		/* Get the latest stat info from server. */
+		struct p9_fid *fid;
+		struct p9_stat_dotl *st;
+
+		fid = v9fs_fid_lookup(old_dentry);
+		if (IS_ERR(fid))
+			return PTR_ERR(fid);
+
+		st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+		if (IS_ERR(st))
+			return PTR_ERR(st);
+
+		v9fs_stat2inode_dotl(st, old_dentry->d_inode);
+
+		kfree(st);
+	} else {
+		/* Caching disabled. No need to get upto date stat info.
+		 * This dentry will be released immediately. So, just i_count++
+		 */
+		atomic_inc(&old_dentry->d_inode->i_count);
+	}
+
+	dentry->d_op = old_dentry->d_op;
+	d_instantiate(dentry, old_dentry->d_inode);
+
+	return err;
+}
+
+/**
  * v9fs_vfs_mknod - create a special file
  * @dir: inode destination for new link
  * @dentry: dentry for file
@@ -1230,6 +1820,100 @@
 	return retval;
 }
 
+/**
+ * v9fs_vfs_mknod_dotl - create a special file
+ * @dir: inode destination for new link
+ * @dentry: dentry for file
+ * @mode: mode for creation
+ * @rdev: device associated with special file
+ *
+ */
+static int
+v9fs_vfs_mknod_dotl(struct inode *dir, struct dentry *dentry, int mode,
+		dev_t rdev)
+{
+	int err;
+	char *name;
+	struct v9fs_session_info *v9ses;
+	struct p9_fid *fid = NULL, *dfid = NULL;
+	struct inode *inode;
+	gid_t gid;
+	struct p9_qid qid;
+	struct dentry *dir_dentry;
+
+	P9_DPRINTK(P9_DEBUG_VFS,
+		" %lu,%s mode: %x MAJOR: %u MINOR: %u\n", dir->i_ino,
+		dentry->d_name.name, mode, MAJOR(rdev), MINOR(rdev));
+
+	if (!new_valid_dev(rdev))
+		return -EINVAL;
+
+	v9ses = v9fs_inode2v9ses(dir);
+	dir_dentry = v9fs_dentry_from_dir_inode(dir);
+	dfid = v9fs_fid_lookup(dir_dentry);
+	if (IS_ERR(dfid)) {
+		err = PTR_ERR(dfid);
+		P9_DPRINTK(P9_DEBUG_VFS, "fid lookup failed %d\n", err);
+		dfid = NULL;
+		goto error;
+	}
+
+	gid = v9fs_get_fsgid_for_create(dir);
+	if (gid < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS, "v9fs_get_fsgid_for_create failed\n");
+		goto error;
+	}
+
+	name = (char *) dentry->d_name.name;
+
+	err = p9_client_mknod_dotl(dfid, name, mode, rdev, gid, &qid);
+	if (err < 0)
+		goto error;
+
+	/* instantiate inode and assign the unopened fid to the dentry */
+	if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) {
+		fid = p9_client_walk(dfid, 1, &name, 1);
+		if (IS_ERR(fid)) {
+			err = PTR_ERR(fid);
+			P9_DPRINTK(P9_DEBUG_VFS, "p9_client_walk failed %d\n",
+				err);
+			fid = NULL;
+			goto error;
+		}
+
+		inode = v9fs_inode_from_fid(v9ses, fid, dir->i_sb);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n",
+				err);
+			goto error;
+		}
+		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_instantiate(dentry, inode);
+		err = v9fs_fid_add(dentry, fid);
+		if (err < 0)
+			goto error;
+		fid = NULL;
+	} else {
+		/*
+		 * Not in cached mode. No need to populate inode with stat.
+		 * socket syscall returns a fd, so we need instantiate
+		 */
+		inode = v9fs_get_inode(dir->i_sb, mode);
+		if (IS_ERR(inode)) {
+			err = PTR_ERR(inode);
+			goto error;
+		}
+		dentry->d_op = &v9fs_dentry_operations;
+		d_instantiate(dentry, inode);
+	}
+
+error:
+	if (fid)
+		p9_client_clunk(fid);
+	return err;
+}
+
 static const struct inode_operations v9fs_dir_inode_operations_dotu = {
 	.create = v9fs_vfs_create,
 	.lookup = v9fs_vfs_lookup,
@@ -1238,24 +1922,29 @@
 	.unlink = v9fs_vfs_unlink,
 	.mkdir = v9fs_vfs_mkdir,
 	.rmdir = v9fs_vfs_rmdir,
-	.mknod = v9fs_vfs_mknod,
+	.mknod = v9fs_vfs_mknod_dotl,
 	.rename = v9fs_vfs_rename,
 	.getattr = v9fs_vfs_getattr,
 	.setattr = v9fs_vfs_setattr,
 };
 
 static const struct inode_operations v9fs_dir_inode_operations_dotl = {
-	.create = v9fs_vfs_create,
+	.create = v9fs_vfs_create_dotl,
 	.lookup = v9fs_vfs_lookup,
-	.symlink = v9fs_vfs_symlink,
-	.link = v9fs_vfs_link,
+	.link = v9fs_vfs_link_dotl,
+	.symlink = v9fs_vfs_symlink_dotl,
 	.unlink = v9fs_vfs_unlink,
-	.mkdir = v9fs_vfs_mkdir,
+	.mkdir = v9fs_vfs_mkdir_dotl,
 	.rmdir = v9fs_vfs_rmdir,
-	.mknod = v9fs_vfs_mknod,
+	.mknod = v9fs_vfs_mknod_dotl,
 	.rename = v9fs_vfs_rename,
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
+
 };
 
 static const struct inode_operations v9fs_dir_inode_operations = {
@@ -1276,8 +1965,12 @@
 };
 
 static const struct inode_operations v9fs_file_inode_operations_dotl = {
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
 };
 
 static const struct inode_operations v9fs_symlink_inode_operations = {
@@ -1292,6 +1985,10 @@
 	.readlink = generic_readlink,
 	.follow_link = v9fs_vfs_follow_link,
 	.put_link = v9fs_vfs_put_link,
-	.getattr = v9fs_vfs_getattr,
-	.setattr = v9fs_vfs_setattr,
+	.getattr = v9fs_vfs_getattr_dotl,
+	.setattr = v9fs_vfs_setattr_dotl,
+	.setxattr = generic_setxattr,
+	.getxattr = generic_getxattr,
+	.removexattr = generic_removexattr,
+	.listxattr = v9fs_listxattr,
 };
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index be74d02..4b9ede0 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -45,6 +45,7 @@
 #include "v9fs.h"
 #include "v9fs_vfs.h"
 #include "fid.h"
+#include "xattr.h"
 
 static const struct super_operations v9fs_super_ops, v9fs_super_ops_dotl;
 
@@ -77,9 +78,10 @@
 	sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
 	sb->s_blocksize = 1 << sb->s_blocksize_bits;
 	sb->s_magic = V9FS_MAGIC;
-	if (v9fs_proto_dotl(v9ses))
+	if (v9fs_proto_dotl(v9ses)) {
 		sb->s_op = &v9fs_super_ops_dotl;
-	else
+		sb->s_xattr = v9fs_xattr_handlers;
+	} else
 		sb->s_op = &v9fs_super_ops;
 	sb->s_bdi = &v9ses->bdi;
 
@@ -107,7 +109,6 @@
 	struct inode *inode = NULL;
 	struct dentry *root = NULL;
 	struct v9fs_session_info *v9ses = NULL;
-	struct p9_wstat *st = NULL;
 	int mode = S_IRWXUGO | S_ISVTX;
 	struct p9_fid *fid;
 	int retval = 0;
@@ -124,16 +125,10 @@
 		goto close_session;
 	}
 
-	st = p9_client_stat(fid);
-	if (IS_ERR(st)) {
-		retval = PTR_ERR(st);
-		goto clunk_fid;
-	}
-
 	sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
 	if (IS_ERR(sb)) {
 		retval = PTR_ERR(sb);
-		goto free_stat;
+		goto clunk_fid;
 	}
 	v9fs_fill_super(sb, v9ses, flags, data);
 
@@ -151,22 +146,38 @@
 	}
 
 	sb->s_root = root;
-	root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
 
-	v9fs_stat2inode(st, root->d_inode, sb);
+	if (v9fs_proto_dotl(v9ses)) {
+		struct p9_stat_dotl *st = NULL;
+		st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
+		if (IS_ERR(st)) {
+			retval = PTR_ERR(st);
+			goto clunk_fid;
+		}
+
+		v9fs_stat2inode_dotl(st, root->d_inode);
+		kfree(st);
+	} else {
+		struct p9_wstat *st = NULL;
+		st = p9_client_stat(fid);
+		if (IS_ERR(st)) {
+			retval = PTR_ERR(st);
+			goto clunk_fid;
+		}
+
+		root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
+		v9fs_stat2inode(st, root->d_inode, sb);
+
+		p9stat_free(st);
+		kfree(st);
+	}
 
 	v9fs_fid_add(root, fid);
-	p9stat_free(st);
-	kfree(st);
 
 P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	simple_set_mnt(mnt, sb);
 	return 0;
 
-free_stat:
-	p9stat_free(st);
-	kfree(st);
-
 clunk_fid:
 	p9_client_clunk(fid);
 
@@ -176,8 +187,6 @@
 	return retval;
 
 release_sb:
-	p9stat_free(st);
-	kfree(st);
 	deactivate_locked_super(sb);
 	return retval;
 }
@@ -278,4 +287,5 @@
 	.get_sb = v9fs_get_sb,
 	.kill_sb = v9fs_kill_super,
 	.owner = THIS_MODULE,
+	.fs_flags = FS_RENAME_DOES_D_MOVE,
 };
diff --git a/fs/9p/xattr.c b/fs/9p/xattr.c
new file mode 100644
index 0000000..f88e5c2
--- /dev/null
+++ b/fs/9p/xattr.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <net/9p/9p.h>
+#include <net/9p/client.h>
+
+#include "fid.h"
+#include "xattr.h"
+
+/*
+ * v9fs_xattr_get()
+ *
+ * Copy an extended attribute into the buffer
+ * provided, or compute the buffer size required.
+ * Buffer is NULL to compute the size of the buffer required.
+ *
+ * Returns a negative error number on failure, or the number of bytes
+ * used / required on success.
+ */
+ssize_t v9fs_xattr_get(struct dentry *dentry, const char *name,
+		       void *buffer, size_t buffer_size)
+{
+	ssize_t retval;
+	int msize, read_count;
+	u64 offset = 0, attr_size;
+	struct p9_fid *fid, *attr_fid;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: name = %s value_len = %zu\n",
+		__func__, name, buffer_size);
+
+	fid = v9fs_fid_lookup(dentry);
+	if (IS_ERR(fid))
+		return PTR_ERR(fid);
+
+	attr_fid = p9_client_xattrwalk(fid, name, &attr_size);
+	if (IS_ERR(attr_fid)) {
+		retval = PTR_ERR(attr_fid);
+		P9_DPRINTK(P9_DEBUG_VFS,
+			"p9_client_attrwalk failed %zd\n", retval);
+		attr_fid = NULL;
+		goto error;
+	}
+	if (!buffer_size) {
+		/* request to get the attr_size */
+		retval = attr_size;
+		goto error;
+	}
+	if (attr_size > buffer_size) {
+		retval = -ERANGE;
+		goto error;
+	}
+	msize = attr_fid->clnt->msize;
+	while (attr_size) {
+		if (attr_size > (msize - P9_IOHDRSZ))
+			read_count = msize - P9_IOHDRSZ;
+		else
+			read_count = attr_size;
+		read_count = p9_client_read(attr_fid, ((char *)buffer)+offset,
+					NULL, offset, read_count);
+		if (read_count < 0) {
+			/* error in xattr read */
+			retval = read_count;
+			goto error;
+		}
+		offset += read_count;
+		attr_size -= read_count;
+	}
+	/* Total read xattr bytes */
+	retval = offset;
+error:
+	if (attr_fid)
+		p9_client_clunk(attr_fid);
+	return retval;
+
+}
+
+/*
+ * v9fs_xattr_set()
+ *
+ * Create, replace or remove an extended attribute for this inode. Buffer
+ * is NULL to remove an existing extended attribute, and non-NULL to
+ * either replace an existing extended attribute, or create a new extended
+ * attribute. The flags XATTR_REPLACE and XATTR_CREATE
+ * specify that an extended attribute must exist and must not exist
+ * previous to the call, respectively.
+ *
+ * Returns 0, or a negative error number on failure.
+ */
+int v9fs_xattr_set(struct dentry *dentry, const char *name,
+		   const void *value, size_t value_len, int flags)
+{
+	u64 offset = 0;
+	int retval, msize, write_count;
+	struct p9_fid *fid = NULL;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: name = %s value_len = %zu flags = %d\n",
+		__func__, name, value_len, flags);
+
+	fid = v9fs_fid_clone(dentry);
+	if (IS_ERR(fid)) {
+		retval = PTR_ERR(fid);
+		fid = NULL;
+		goto error;
+	}
+	/*
+	 * On success fid points to xattr
+	 */
+	retval = p9_client_xattrcreate(fid, name, value_len, flags);
+	if (retval < 0) {
+		P9_DPRINTK(P9_DEBUG_VFS,
+			"p9_client_xattrcreate failed %d\n", retval);
+		goto error;
+	}
+	msize = fid->clnt->msize;;
+	while (value_len) {
+		if (value_len > (msize - P9_IOHDRSZ))
+			write_count = msize - P9_IOHDRSZ;
+		else
+			write_count = value_len;
+		write_count = p9_client_write(fid, ((char *)value)+offset,
+					NULL, offset, write_count);
+		if (write_count < 0) {
+			/* error in xattr write */
+			retval = write_count;
+			goto error;
+		}
+		offset += write_count;
+		value_len -= write_count;
+	}
+	/* Total read xattr bytes */
+	retval = offset;
+error:
+	if (fid)
+		retval = p9_client_clunk(fid);
+	return retval;
+}
+
+ssize_t v9fs_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size)
+{
+	return v9fs_xattr_get(dentry, NULL, buffer, buffer_size);
+}
+
+const struct xattr_handler *v9fs_xattr_handlers[] = {
+	&v9fs_xattr_user_handler,
+	NULL
+};
diff --git a/fs/9p/xattr.h b/fs/9p/xattr.h
new file mode 100644
index 0000000..9ddf672
--- /dev/null
+++ b/fs/9p/xattr.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#ifndef FS_9P_XATTR_H
+#define FS_9P_XATTR_H
+
+#include <linux/xattr.h>
+
+extern const struct xattr_handler *v9fs_xattr_handlers[];
+extern struct xattr_handler v9fs_xattr_user_handler;
+
+extern ssize_t v9fs_xattr_get(struct dentry *, const char *,
+			      void *, size_t);
+extern int v9fs_xattr_set(struct dentry *, const char *,
+			  const void *, size_t, int);
+extern ssize_t v9fs_listxattr(struct dentry *, char *, size_t);
+#endif /* FS_9P_XATTR_H */
diff --git a/fs/9p/xattr_user.c b/fs/9p/xattr_user.c
new file mode 100644
index 0000000..d0b701b
--- /dev/null
+++ b/fs/9p/xattr_user.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright IBM Corporation, 2010
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include "xattr.h"
+
+static int v9fs_xattr_user_get(struct dentry *dentry, const char *name,
+			void *buffer, size_t size, int type)
+{
+	int retval;
+	char *full_name;
+	size_t name_len;
+	size_t prefix_len = XATTR_USER_PREFIX_LEN;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	name_len = strlen(name);
+	full_name = kmalloc(prefix_len + name_len + 1 , GFP_KERNEL);
+	if (!full_name)
+		return -ENOMEM;
+	memcpy(full_name, XATTR_USER_PREFIX, prefix_len);
+	memcpy(full_name+prefix_len, name, name_len);
+	full_name[prefix_len + name_len] = '\0';
+
+	retval = v9fs_xattr_get(dentry, full_name, buffer, size);
+	kfree(full_name);
+	return retval;
+}
+
+static int v9fs_xattr_user_set(struct dentry *dentry, const char *name,
+			const void *value, size_t size, int flags, int type)
+{
+	int retval;
+	char *full_name;
+	size_t name_len;
+	size_t prefix_len = XATTR_USER_PREFIX_LEN;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	if (strcmp(name, "") == 0)
+		return -EINVAL;
+
+	name_len = strlen(name);
+	full_name = kmalloc(prefix_len + name_len + 1 , GFP_KERNEL);
+	if (!full_name)
+		return -ENOMEM;
+	memcpy(full_name, XATTR_USER_PREFIX, prefix_len);
+	memcpy(full_name + prefix_len, name, name_len);
+	full_name[prefix_len + name_len] = '\0';
+
+	retval = v9fs_xattr_set(dentry, full_name, value, size, flags);
+	kfree(full_name);
+	return retval;
+}
+
+struct xattr_handler v9fs_xattr_user_handler = {
+	.prefix	= XATTR_USER_PREFIX,
+	.get	= v9fs_xattr_user_get,
+	.set	= v9fs_xattr_user_set,
+};
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 3dab9e9..722743b 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -680,7 +680,6 @@
 {
 	struct address_space *mapping = vnode->vfs_inode.i_mapping;
 	struct writeback_control wbc = {
-		.bdi		= mapping->backing_dev_info,
 		.sync_mode	= WB_SYNC_ALL,
 		.nr_to_write	= LONG_MAX,
 		.range_cyclic	= 1,
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 49566c1..811384b 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -56,16 +56,19 @@
 #endif
 
 /*
- * User data (stack, data section and bss) needs to be aligned
- * for the same reasons as SLAB memory is, and to the same amount.
- * Avoid duplicating architecture specific code by using the same
- * macro as with SLAB allocation:
+ * User data (data section and bss) needs to be aligned.
+ * We pick 0x20 here because it is the max value elf2flt has always
+ * used in producing FLAT files, and because it seems to be large
+ * enough to make all the gcc alignment related tests happy.
  */
-#ifdef ARCH_SLAB_MINALIGN
-#define FLAT_DATA_ALIGN	(ARCH_SLAB_MINALIGN)
-#else
-#define FLAT_DATA_ALIGN	(sizeof(void *))
-#endif
+#define FLAT_DATA_ALIGN	(0x20)
+
+/*
+ * User data (stack) also needs to be aligned.
+ * Here we can be a bit looser than the data sections since this
+ * needs to only meet arch ABI requirements.
+ */
+#define FLAT_STACK_ALIGN	max_t(unsigned long, sizeof(void *), ARCH_SLAB_MINALIGN)
 
 #define RELOC_FAILED 0xff00ff01		/* Relocation incorrect somewhere */
 #define UNLOADED_LIB 0x7ff000ff		/* Placeholder for unused library */
@@ -129,7 +132,7 @@
 
 	sp = (unsigned long *)p;
 	sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
-	sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+	sp = (unsigned long *) ((unsigned long)sp & -FLAT_STACK_ALIGN);
 	argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
 	envp = argv + (argc + 1);
 
@@ -589,7 +592,7 @@
 		if (IS_ERR_VALUE(result)) {
 			printk("Unable to read data+bss, errno %d\n", (int)-result);
 			do_munmap(current->mm, textpos, text_len);
-			do_munmap(current->mm, realdatastart, data_len + extra);
+			do_munmap(current->mm, realdatastart, len);
 			ret = result;
 			goto err;
 		}
@@ -876,7 +879,7 @@
 	stack_len = TOP_OF_ARGS - bprm->p;             /* the strings */
 	stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
 	stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-	stack_len += FLAT_DATA_ALIGN - 1;  /* reserve for upcoming alignment */
+	stack_len += FLAT_STACK_ALIGN - 1;  /* reserve for upcoming alignment */
 	
 	res = load_flat_file(bprm, &libinfo, 0, &stack_len);
 	if (IS_ERR_VALUE(res))
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7346c96..99d6af8 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -706,8 +706,13 @@
  * @bdev is about to be opened exclusively.  Check @bdev can be opened
  * exclusively and mark that an exclusive open is in progress.  Each
  * successful call to this function must be matched with a call to
- * either bd_claim() or bd_abort_claiming().  If this function
- * succeeds, the matching bd_claim() is guaranteed to succeed.
+ * either bd_finish_claiming() or bd_abort_claiming() (which do not
+ * fail).
+ *
+ * This function is used to gain exclusive access to the block device
+ * without actually causing other exclusive open attempts to fail. It
+ * should be used when the open sequence itself requires exclusive
+ * access but may subsequently fail.
  *
  * CONTEXT:
  * Might sleep.
@@ -734,6 +739,7 @@
 		return ERR_PTR(-ENXIO);
 
 	whole = bdget_disk(disk, 0);
+	module_put(disk->fops->owner);
 	put_disk(disk);
 	if (!whole)
 		return ERR_PTR(-ENOMEM);
@@ -782,15 +788,46 @@
 	__bd_abort_claiming(whole, holder);		/* releases bdev_lock */
 }
 
+/* increment holders when we have a legitimate claim. requires bdev_lock */
+static void __bd_claim(struct block_device *bdev, struct block_device *whole,
+					void *holder)
+{
+	/* note that for a whole device bd_holders
+	 * will be incremented twice, and bd_holder will
+	 * be set to bd_claim before being set to holder
+	 */
+	whole->bd_holders++;
+	whole->bd_holder = bd_claim;
+	bdev->bd_holders++;
+	bdev->bd_holder = holder;
+}
+
+/**
+ * bd_finish_claiming - finish claiming a block device
+ * @bdev: block device of interest (passed to bd_start_claiming())
+ * @whole: whole block device returned by bd_start_claiming()
+ * @holder: holder trying to claim @bdev
+ *
+ * Finish a claiming block started by bd_start_claiming().
+ *
+ * CONTEXT:
+ * Grabs and releases bdev_lock.
+ */
+static void bd_finish_claiming(struct block_device *bdev,
+				struct block_device *whole, void *holder)
+{
+	spin_lock(&bdev_lock);
+	BUG_ON(!bd_may_claim(bdev, whole, holder));
+	__bd_claim(bdev, whole, holder);
+	__bd_abort_claiming(whole, holder); /* not actually an abort */
+}
+
 /**
  * bd_claim - claim a block device
  * @bdev: block device to claim
  * @holder: holder trying to claim @bdev
  *
- * Try to claim @bdev which must have been opened successfully.  This
- * function may be called with or without preceding
- * blk_start_claiming().  In the former case, this function is always
- * successful and terminates the claiming block.
+ * Try to claim @bdev which must have been opened successfully.
  *
  * CONTEXT:
  * Might sleep.
@@ -806,23 +843,10 @@
 	might_sleep();
 
 	spin_lock(&bdev_lock);
-
 	res = bd_prepare_to_claim(bdev, whole, holder);
-	if (res == 0) {
-		/* note that for a whole device bd_holders
-		 * will be incremented twice, and bd_holder will
-		 * be set to bd_claim before being set to holder
-		 */
-		whole->bd_holders++;
-		whole->bd_holder = bd_claim;
-		bdev->bd_holders++;
-		bdev->bd_holder = holder;
-	}
-
-	if (whole->bd_claiming)
-		__bd_abort_claiming(whole, holder);	/* releases bdev_lock */
-	else
-		spin_unlock(&bdev_lock);
+	if (res == 0)
+		__bd_claim(bdev, whole, holder);
+	spin_unlock(&bdev_lock);
 
 	return res;
 }
@@ -1476,7 +1500,7 @@
 
 	if (whole) {
 		if (res == 0)
-			BUG_ON(bd_claim(bdev, filp) != 0);
+			bd_finish_claiming(bdev, whole, filp);
 		else
 			bd_abort_claiming(whole, filp);
 	}
@@ -1712,7 +1736,7 @@
 	if ((mode & FMODE_WRITE) && bdev_read_only(bdev))
 		goto out_blkdev_put;
 
-	BUG_ON(bd_claim(bdev, holder) != 0);
+	bd_finish_claiming(bdev, whole, holder);
 	return bdev;
 
 out_blkdev_put:
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 8d432cd..2222d16 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -60,6 +60,8 @@
 		size = __btrfs_getxattr(inode, name, value, size);
 		if (size > 0) {
 			acl = posix_acl_from_xattr(value, size);
+			if (IS_ERR(acl))
+				return acl;
 			set_cached_acl(inode, type, acl);
 		}
 		kfree(value);
@@ -160,6 +162,12 @@
 	int ret;
 	struct posix_acl *acl = NULL;
 
+	if (!is_owner_or_cap(dentry->d_inode))
+		return -EPERM;
+
+	if (!IS_POSIXACL(dentry->d_inode))
+		return -EOPNOTSUPP;
+
 	if (value) {
 		acl = posix_acl_from_xattr(value, size);
 		if (acl == NULL) {
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 0d1d966..c3df14c 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2304,12 +2304,17 @@
 	return ret;
 }
 
+/*
+ * min slot controls the lowest index we're willing to push to the
+ * right.  We'll push up to and including min_slot, but no lower
+ */
 static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
 				      struct btrfs_root *root,
 				      struct btrfs_path *path,
 				      int data_size, int empty,
 				      struct extent_buffer *right,
-				      int free_space, u32 left_nritems)
+				      int free_space, u32 left_nritems,
+				      u32 min_slot)
 {
 	struct extent_buffer *left = path->nodes[0];
 	struct extent_buffer *upper = path->nodes[1];
@@ -2327,7 +2332,7 @@
 	if (empty)
 		nr = 0;
 	else
-		nr = 1;
+		nr = max_t(u32, 1, min_slot);
 
 	if (path->slots[0] >= left_nritems)
 		push_space += data_size;
@@ -2469,10 +2474,14 @@
  *
  * returns 1 if the push failed because the other node didn't have enough
  * room, 0 if everything worked out and < 0 if there were major errors.
+ *
+ * this will push starting from min_slot to the end of the leaf.  It won't
+ * push any slot lower than min_slot
  */
 static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
-			   *root, struct btrfs_path *path, int data_size,
-			   int empty)
+			   *root, struct btrfs_path *path,
+			   int min_data_size, int data_size,
+			   int empty, u32 min_slot)
 {
 	struct extent_buffer *left = path->nodes[0];
 	struct extent_buffer *right;
@@ -2514,8 +2523,8 @@
 	if (left_nritems == 0)
 		goto out_unlock;
 
-	return __push_leaf_right(trans, root, path, data_size, empty,
-				right, free_space, left_nritems);
+	return __push_leaf_right(trans, root, path, min_data_size, empty,
+				right, free_space, left_nritems, min_slot);
 out_unlock:
 	btrfs_tree_unlock(right);
 	free_extent_buffer(right);
@@ -2525,12 +2534,17 @@
 /*
  * push some data in the path leaf to the left, trying to free up at
  * least data_size bytes.  returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items.  The
+ * item at 'max_slot' won't be touched.  Use (u32)-1 to make us do all the
+ * items
  */
 static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
 				     struct btrfs_root *root,
 				     struct btrfs_path *path, int data_size,
 				     int empty, struct extent_buffer *left,
-				     int free_space, int right_nritems)
+				     int free_space, u32 right_nritems,
+				     u32 max_slot)
 {
 	struct btrfs_disk_key disk_key;
 	struct extent_buffer *right = path->nodes[0];
@@ -2549,9 +2563,9 @@
 	slot = path->slots[1];
 
 	if (empty)
-		nr = right_nritems;
+		nr = min(right_nritems, max_slot);
 	else
-		nr = right_nritems - 1;
+		nr = min(right_nritems - 1, max_slot);
 
 	for (i = 0; i < nr; i++) {
 		item = btrfs_item_nr(right, i);
@@ -2712,10 +2726,14 @@
 /*
  * push some data in the path leaf to the left, trying to free up at
  * least data_size bytes.  returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items.  The
+ * item at 'max_slot' won't be touched.  Use (u32)-1 to make us push all the
+ * items
  */
 static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
-			  *root, struct btrfs_path *path, int data_size,
-			  int empty)
+			  *root, struct btrfs_path *path, int min_data_size,
+			  int data_size, int empty, u32 max_slot)
 {
 	struct extent_buffer *right = path->nodes[0];
 	struct extent_buffer *left;
@@ -2761,8 +2779,9 @@
 		goto out;
 	}
 
-	return __push_leaf_left(trans, root, path, data_size,
-			       empty, left, free_space, right_nritems);
+	return __push_leaf_left(trans, root, path, min_data_size,
+			       empty, left, free_space, right_nritems,
+			       max_slot);
 out:
 	btrfs_tree_unlock(left);
 	free_extent_buffer(left);
@@ -2855,6 +2874,64 @@
 }
 
 /*
+ * double splits happen when we need to insert a big item in the middle
+ * of a leaf.  A double split can leave us with 3 mostly empty leaves:
+ * leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
+ *          A                 B                 C
+ *
+ * We avoid this by trying to push the items on either side of our target
+ * into the adjacent leaves.  If all goes well we can avoid the double split
+ * completely.
+ */
+static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
+					  struct btrfs_root *root,
+					  struct btrfs_path *path,
+					  int data_size)
+{
+	int ret;
+	int progress = 0;
+	int slot;
+	u32 nritems;
+
+	slot = path->slots[0];
+
+	/*
+	 * try to push all the items after our slot into the
+	 * right leaf
+	 */
+	ret = push_leaf_right(trans, root, path, 1, data_size, 0, slot);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0)
+		progress++;
+
+	nritems = btrfs_header_nritems(path->nodes[0]);
+	/*
+	 * our goal is to get our slot at the start or end of a leaf.  If
+	 * we've done so we're done
+	 */
+	if (path->slots[0] == 0 || path->slots[0] == nritems)
+		return 0;
+
+	if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+		return 0;
+
+	/* try to push all the items before our slot into the next leaf */
+	slot = path->slots[0];
+	ret = push_leaf_left(trans, root, path, 1, data_size, 0, slot);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0)
+		progress++;
+
+	if (progress)
+		return 0;
+	return 1;
+}
+
+/*
  * split the path's leaf in two, making sure there is at least data_size
  * available for the resulting leaf level of the path.
  *
@@ -2876,6 +2953,7 @@
 	int wret;
 	int split;
 	int num_doubles = 0;
+	int tried_avoid_double = 0;
 
 	l = path->nodes[0];
 	slot = path->slots[0];
@@ -2884,12 +2962,14 @@
 		return -EOVERFLOW;
 
 	/* first try to make some room by pushing left and right */
-	if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
-		wret = push_leaf_right(trans, root, path, data_size, 0);
+	if (data_size) {
+		wret = push_leaf_right(trans, root, path, data_size,
+				       data_size, 0, 0);
 		if (wret < 0)
 			return wret;
 		if (wret) {
-			wret = push_leaf_left(trans, root, path, data_size, 0);
+			wret = push_leaf_left(trans, root, path, data_size,
+					      data_size, 0, (u32)-1);
 			if (wret < 0)
 				return wret;
 		}
@@ -2923,6 +3003,8 @@
 				if (mid != nritems &&
 				    leaf_space_used(l, mid, nritems - mid) +
 				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					if (data_size && !tried_avoid_double)
+						goto push_for_double;
 					split = 2;
 				}
 			}
@@ -2939,6 +3021,8 @@
 				if (mid != nritems &&
 				    leaf_space_used(l, mid, nritems - mid) +
 				    data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+					if (data_size && !tried_avoid_double)
+						goto push_for_double;
 					split = 2 ;
 				}
 			}
@@ -3019,6 +3103,13 @@
 	}
 
 	return ret;
+
+push_for_double:
+	push_for_double_split(trans, root, path, data_size);
+	tried_avoid_double = 1;
+	if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+		return 0;
+	goto again;
 }
 
 static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
@@ -3915,13 +4006,15 @@
 			extent_buffer_get(leaf);
 
 			btrfs_set_path_blocking(path);
-			wret = push_leaf_left(trans, root, path, 1, 1);
+			wret = push_leaf_left(trans, root, path, 1, 1,
+					      1, (u32)-1);
 			if (wret < 0 && wret != -ENOSPC)
 				ret = wret;
 
 			if (path->nodes[0] == leaf &&
 			    btrfs_header_nritems(leaf)) {
-				wret = push_leaf_right(trans, root, path, 1, 1);
+				wret = push_leaf_right(trans, root, path, 1,
+						       1, 1, 0);
 				if (wret < 0 && wret != -ENOSPC)
 					ret = wret;
 			}
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index f3b287c..34f7c37 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1941,8 +1941,11 @@
 		     btrfs_level_size(tree_root,
 				      btrfs_super_log_root_level(disk_super));
 
-		log_tree_root = kzalloc(sizeof(struct btrfs_root),
-						      GFP_NOFS);
+		log_tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+		if (!log_tree_root) {
+			err = -ENOMEM;
+			goto fail_trans_kthread;
+		}
 
 		__setup_root(nodesize, leafsize, sectorsize, stripesize,
 			     log_tree_root, fs_info, BTRFS_TREE_LOG_OBJECTID);
@@ -1982,6 +1985,10 @@
 	fs_info->fs_root = btrfs_read_fs_root_no_name(fs_info, &location);
 	if (!fs_info->fs_root)
 		goto fail_trans_kthread;
+	if (IS_ERR(fs_info->fs_root)) {
+		err = PTR_ERR(fs_info->fs_root);
+		goto fail_trans_kthread;
+	}
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		down_read(&fs_info->cleanup_work_sem);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index b9080d7..32d0940 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4360,7 +4360,8 @@
 
 	block_rsv = get_block_rsv(trans, root);
 	cache = btrfs_lookup_block_group(root->fs_info, buf->start);
-	BUG_ON(block_rsv->space_info != cache->space_info);
+	if (block_rsv->space_info != cache->space_info)
+		goto out;
 
 	if (btrfs_header_generation(buf) == trans->transid) {
 		if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) {
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index a4080c2..d74e6af 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2594,7 +2594,6 @@
 		.sync_io = wbc->sync_mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
-		.bdi		= wbc->bdi,
 		.sync_mode	= wbc->sync_mode,
 		.older_than_this = NULL,
 		.nr_to_write	= 64,
@@ -2628,7 +2627,6 @@
 		.sync_io = mode == WB_SYNC_ALL,
 	};
 	struct writeback_control wbc_writepages = {
-		.bdi		= inode->i_mapping->backing_dev_info,
 		.sync_mode	= mode,
 		.older_than_this = NULL,
 		.nr_to_write	= nr_pages * 2,
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 787b50a..e354c33 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1140,7 +1140,7 @@
 	/*
 	 * ok we haven't committed the transaction yet, lets do a commit
 	 */
-	if (file && file->private_data)
+	if (file->private_data)
 		btrfs_ioctl_trans_end(file);
 
 	trans = btrfs_start_transaction(root, 0);
@@ -1190,14 +1190,22 @@
 
 static int btrfs_file_mmap(struct file	*filp, struct vm_area_struct *vma)
 {
-	vma->vm_ops = &btrfs_file_vm_ops;
+	struct address_space *mapping = filp->f_mapping;
+
+	if (!mapping->a_ops->readpage)
+		return -ENOEXEC;
+
 	file_accessed(filp);
+	vma->vm_ops = &btrfs_file_vm_ops;
+	vma->vm_flags |= VM_CAN_NONLINEAR;
+
 	return 0;
 }
 
 const struct file_operations btrfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
+	.write		= do_sync_write,
 	.aio_read       = generic_file_aio_read,
 	.splice_read	= generic_file_splice_read,
 	.aio_write	= btrfs_file_aio_write,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index fa6ccc1..1bff92a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2673,7 +2673,7 @@
 	struct extent_buffer *eb;
 	int level;
 	int ret;
-	u64 refs;
+	u64 refs = 1;
 
 	for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
 		if (!path->nodes[level])
@@ -6884,7 +6884,7 @@
 		if (em->block_start == EXTENT_MAP_HOLE ||
 		    (cur_offset >= inode->i_size &&
 		     !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-			ret = btrfs_prealloc_file_range(inode, 0, cur_offset,
+			ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
 							last_byte - cur_offset,
 							1 << inode->i_blkbits,
 							offset + len,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 4cdb98c..9254b3d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1280,7 +1280,7 @@
 	trans = btrfs_start_transaction(root, 0);
 	if (IS_ERR(trans)) {
 		err = PTR_ERR(trans);
-		goto out;
+		goto out_up_write;
 	}
 	trans->block_rsv = &root->fs_info->global_block_rsv;
 
@@ -1458,7 +1458,7 @@
 	 */
 
 	/* the destination must be opened for writing */
-	if (!(file->f_mode & FMODE_WRITE))
+	if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND))
 		return -EINVAL;
 
 	ret = mnt_want_write(file->f_path.mnt);
@@ -1511,7 +1511,7 @@
 
 	/* determine range to clone */
 	ret = -EINVAL;
-	if (off >= src->i_size || off + len > src->i_size)
+	if (off + len > src->i_size || off + len < off)
 		goto out_unlock;
 	if (len == 0)
 		olen = len = src->i_size - off;
@@ -1578,6 +1578,7 @@
 			u64 disko = 0, diskl = 0;
 			u64 datao = 0, datal = 0;
 			u8 comp;
+			u64 endoff;
 
 			size = btrfs_item_size_nr(leaf, slot);
 			read_extent_buffer(leaf, buf,
@@ -1712,9 +1713,18 @@
 			btrfs_release_path(root, path);
 
 			inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-			if (new_key.offset + datal > inode->i_size)
-				btrfs_i_size_write(inode,
-						   new_key.offset + datal);
+
+			/*
+			 * we round up to the block size at eof when
+			 * determining which extents to clone above,
+			 * but shouldn't round up the file size
+			 */
+			endoff = new_key.offset + datal;
+			if (endoff > off+olen)
+				endoff = off+olen;
+			if (endoff > inode->i_size)
+				btrfs_i_size_write(inode, endoff);
+
 			BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
 			ret = btrfs_update_inode(trans, root, inode);
 			BUG_ON(ret);
@@ -1845,7 +1855,7 @@
 	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(trans, root->fs_info->tree_root, path,
 				   dir_id, "default", 7, 1);
-	if (!di) {
+	if (IS_ERR_OR_NULL(di)) {
 		btrfs_free_path(path);
 		btrfs_end_transaction(trans, root);
 		printk(KERN_ERR "Umm, you don't have the default dir item, "
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 05d41e5..b37d723 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -784,16 +784,17 @@
 				struct btrfs_extent_ref_v0 *ref0;
 				ref0 = btrfs_item_ptr(eb, path1->slots[0],
 						struct btrfs_extent_ref_v0);
-				root = find_tree_root(rc, eb, ref0);
-				if (!root->ref_cows)
-					cur->cowonly = 1;
 				if (key.objectid == key.offset) {
+					root = find_tree_root(rc, eb, ref0);
 					if (root && !should_ignore_root(root))
 						cur->root = root;
 					else
 						list_add(&cur->list, &useless);
 					break;
 				}
+				if (is_cowonly_root(btrfs_ref_root_v0(eb,
+								      ref0)))
+					cur->cowonly = 1;
 			}
 #else
 		BUG_ON(key.type == BTRFS_EXTENT_REF_V0_KEY);
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index b91ccd9..2d958be 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -330,7 +330,6 @@
 {
 	struct btrfs_path *path;
 	int ret;
-	u32 refs;
 	struct btrfs_root_item *ri;
 	struct extent_buffer *leaf;
 
@@ -344,8 +343,6 @@
 	leaf = path->nodes[0];
 	ri = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_item);
 
-	refs = btrfs_disk_root_refs(leaf, ri);
-	BUG_ON(refs != 0);
 	ret = btrfs_del_item(trans, root, path);
 out:
 	btrfs_free_path(path);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index d34b2df..f2393b3 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -360,6 +360,8 @@
 	 */
 	dir_id = btrfs_super_root_dir(&root->fs_info->super_copy);
 	di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0);
+	if (IS_ERR(di))
+		return ERR_CAST(di);
 	if (!di) {
 		/*
 		 * Ok the default dir item isn't there.  This is weird since
@@ -390,8 +392,8 @@
 	location.offset = 0;
 
 	inode = btrfs_iget(sb, &location, new_root, &new);
-	if (!inode)
-		return ERR_PTR(-ENOMEM);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
 
 	/*
 	 * If we're just mounting the root most subvol put the inode and return
diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig
index 04b8280..bc87b9c 100644
--- a/fs/ceph/Kconfig
+++ b/fs/ceph/Kconfig
@@ -2,7 +2,7 @@
         tristate "Ceph distributed file system (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL
 	select LIBCRC32C
-	select CONFIG_CRYPTO_AES
+	select CRYPTO_AES
 	help
 	  Choose Y or M here to include support for mounting the
 	  experimental Ceph distributed file system.  Ceph is an extremely
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index 83d4d27..6d44053 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -493,7 +493,7 @@
 		return -EAGAIN;
 	}
 
-	op = le32_to_cpu(head->op);
+	op = le16_to_cpu(head->op);
 	result = le32_to_cpu(head->result);
 	dout("handle_reply op %d result %d\n", op, result);
 	switch (op) {
@@ -613,6 +613,9 @@
 		remove_ticket_handler(ac, th);
 	}
 
+	if (xi->auth_authorizer.buf)
+		ceph_buffer_put(xi->auth_authorizer.buf);
+
 	kfree(ac->private);
 	ac->private = NULL;
 }
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index ae3e3a3..b81be9a 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -244,8 +244,14 @@
 	struct ceph_cap *cap = NULL;
 
 	/* temporary, until we do something about cap import/export */
-	if (!ctx)
-		return kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+	if (!ctx) {
+		cap = kmem_cache_alloc(ceph_cap_cachep, GFP_NOFS);
+		if (cap) {
+			caps_use_count++;
+			caps_total_count++;
+		}
+		return cap;
+	}
 
 	spin_lock(&caps_list_lock);
 	dout("get_cap ctx=%p (%d) %d = %d used + %d resv + %d avail\n",
@@ -621,7 +627,7 @@
 	if (fmode >= 0)
 		__ceph_get_fmode(ci, fmode);
 	spin_unlock(&inode->i_lock);
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	return 0;
 }
 
@@ -981,6 +987,46 @@
 	return 0;
 }
 
+static void __queue_cap_release(struct ceph_mds_session *session,
+				u64 ino, u64 cap_id, u32 migrate_seq,
+				u32 issue_seq)
+{
+	struct ceph_msg *msg;
+	struct ceph_mds_cap_release *head;
+	struct ceph_mds_cap_item *item;
+
+	spin_lock(&session->s_cap_lock);
+	BUG_ON(!session->s_num_cap_releases);
+	msg = list_first_entry(&session->s_cap_releases,
+			       struct ceph_msg, list_head);
+
+	dout(" adding %llx release to mds%d msg %p (%d left)\n",
+	     ino, session->s_mds, msg, session->s_num_cap_releases);
+
+	BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
+	head = msg->front.iov_base;
+	head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
+	item = msg->front.iov_base + msg->front.iov_len;
+	item->ino = cpu_to_le64(ino);
+	item->cap_id = cpu_to_le64(cap_id);
+	item->migrate_seq = cpu_to_le32(migrate_seq);
+	item->seq = cpu_to_le32(issue_seq);
+
+	session->s_num_cap_releases--;
+
+	msg->front.iov_len += sizeof(*item);
+	if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
+		dout(" release msg %p full\n", msg);
+		list_move_tail(&msg->list_head, &session->s_cap_releases_done);
+	} else {
+		dout(" release msg %p at %d/%d (%d)\n", msg,
+		     (int)le32_to_cpu(head->num),
+		     (int)CEPH_CAPS_PER_RELEASE,
+		     (int)msg->front.iov_len);
+	}
+	spin_unlock(&session->s_cap_lock);
+}
+
 /*
  * Queue cap releases when an inode is dropped from our cache.  Since
  * inode is about to be destroyed, there is no need for i_lock.
@@ -994,41 +1040,9 @@
 	while (p) {
 		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
 		struct ceph_mds_session *session = cap->session;
-		struct ceph_msg *msg;
-		struct ceph_mds_cap_release *head;
-		struct ceph_mds_cap_item *item;
 
-		spin_lock(&session->s_cap_lock);
-		BUG_ON(!session->s_num_cap_releases);
-		msg = list_first_entry(&session->s_cap_releases,
-				       struct ceph_msg, list_head);
-
-		dout(" adding %p release to mds%d msg %p (%d left)\n",
-		     inode, session->s_mds, msg, session->s_num_cap_releases);
-
-		BUG_ON(msg->front.iov_len + sizeof(*item) > PAGE_CACHE_SIZE);
-		head = msg->front.iov_base;
-		head->num = cpu_to_le32(le32_to_cpu(head->num) + 1);
-		item = msg->front.iov_base + msg->front.iov_len;
-		item->ino = cpu_to_le64(ceph_ino(inode));
-		item->cap_id = cpu_to_le64(cap->cap_id);
-		item->migrate_seq = cpu_to_le32(cap->mseq);
-		item->seq = cpu_to_le32(cap->issue_seq);
-
-		session->s_num_cap_releases--;
-
-		msg->front.iov_len += sizeof(*item);
-		if (le32_to_cpu(head->num) == CEPH_CAPS_PER_RELEASE) {
-			dout(" release msg %p full\n", msg);
-			list_move_tail(&msg->list_head,
-				       &session->s_cap_releases_done);
-		} else {
-			dout(" release msg %p at %d/%d (%d)\n", msg,
-			     (int)le32_to_cpu(head->num),
-			     (int)CEPH_CAPS_PER_RELEASE,
-			     (int)msg->front.iov_len);
-		}
-		spin_unlock(&session->s_cap_lock);
+		__queue_cap_release(session, ceph_ino(inode), cap->cap_id,
+				    cap->mseq, cap->issue_seq);
 		p = rb_next(p);
 		__ceph_remove_cap(cap);
 	}
@@ -1167,7 +1181,7 @@
 	}
 
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 
 	return delayed;
 }
@@ -2139,7 +2153,7 @@
 	else if (flushsnaps)
 		ceph_flush_snaps(ci);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 	if (put)
 		iput(inode);
 }
@@ -2215,7 +2229,7 @@
 		iput(inode);
 	} else if (complete_capsnap) {
 		ceph_flush_snaps(ci);
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 	}
 	if (drop_capsnap)
 		iput(inode);
@@ -2391,7 +2405,7 @@
 	if (queue_invalidate)
 		ceph_queue_invalidate(inode);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 
 	if (check_caps == 1)
 		ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
@@ -2446,7 +2460,7 @@
 					 struct ceph_inode_info,
 					 i_flushing_item)->vfs_inode);
 		mdsc->num_cap_flushing--;
-		wake_up(&mdsc->cap_flushing_wq);
+		wake_up_all(&mdsc->cap_flushing_wq);
 		dout(" inode %p now !flushing\n", inode);
 
 		if (ci->i_dirty_caps == 0) {
@@ -2458,7 +2472,7 @@
 		}
 	}
 	spin_unlock(&mdsc->cap_dirty_lock);
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 
 out:
 	spin_unlock(&inode->i_lock);
@@ -2655,7 +2669,7 @@
 	struct ceph_mds_caps *h;
 	int mds = session->s_mds;
 	int op;
-	u32 seq;
+	u32 seq, mseq;
 	struct ceph_vino vino;
 	u64 cap_id;
 	u64 size, max_size;
@@ -2675,6 +2689,7 @@
 	vino.snap = CEPH_NOSNAP;
 	cap_id = le64_to_cpu(h->cap_id);
 	seq = le32_to_cpu(h->seq);
+	mseq = le32_to_cpu(h->migrate_seq);
 	size = le64_to_cpu(h->size);
 	max_size = le64_to_cpu(h->max_size);
 
@@ -2689,6 +2704,18 @@
 	     vino.snap, inode);
 	if (!inode) {
 		dout(" i don't have ino %llx\n", vino.ino);
+
+		if (op == CEPH_CAP_OP_IMPORT)
+			__queue_cap_release(session, vino.ino, cap_id,
+					    mseq, seq);
+
+		/*
+		 * send any full release message to try to move things
+		 * along for the mds (who clearly thinks we still have this
+		 * cap).
+		 */
+		ceph_add_cap_releases(mdsc, session, -1);
+		ceph_send_cap_releases(mdsc, session);
 		goto done;
 	}
 
@@ -2714,7 +2741,7 @@
 	spin_lock(&inode->i_lock);
 	cap = __get_cap_for_mds(ceph_inode(inode), mds);
 	if (!cap) {
-		dout("no cap on %p ino %llx.%llx from mds%d, releasing\n",
+		dout(" no cap on %p ino %llx.%llx from mds%d\n",
 		     inode, ceph_ino(inode), ceph_snap(inode), mds);
 		spin_unlock(&inode->i_lock);
 		goto done;
@@ -2865,18 +2892,19 @@
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct ceph_cap *cap;
 	struct ceph_mds_request_release *rel = *p;
+	int used, dirty;
 	int ret = 0;
-	int used = 0;
 
 	spin_lock(&inode->i_lock);
 	used = __ceph_caps_used(ci);
+	dirty = __ceph_caps_dirty(ci);
 
-	dout("encode_inode_release %p mds%d used %s drop %s unless %s\n", inode,
-	     mds, ceph_cap_string(used), ceph_cap_string(drop),
+	dout("encode_inode_release %p mds%d used|dirty %s drop %s unless %s\n",
+	     inode, mds, ceph_cap_string(used|dirty), ceph_cap_string(drop),
 	     ceph_cap_string(unless));
 
-	/* only drop unused caps */
-	drop &= ~used;
+	/* only drop unused, clean caps */
+	drop &= ~(used | dirty);
 
 	cap = __get_cap_for_mds(ci, mds);
 	if (cap && __cap_is_valid(cap)) {
@@ -2956,6 +2984,7 @@
 		memcpy(*p, dentry->d_name.name, dentry->d_name.len);
 		*p += dentry->d_name.len;
 		rel->dname_seq = cpu_to_le32(di->lease_seq);
+		__ceph_mdsc_drop_dentry_lease(dentry);
 	}
 	spin_unlock(&dentry->d_lock);
 	return ret;
diff --git a/fs/ceph/crush/mapper.c b/fs/ceph/crush/mapper.c
index 9ba54ef..a4eec13 100644
--- a/fs/ceph/crush/mapper.c
+++ b/fs/ceph/crush/mapper.c
@@ -238,7 +238,7 @@
 
 static int crush_bucket_choose(struct crush_bucket *in, int x, int r)
 {
-	dprintk("choose %d x=%d r=%d\n", in->id, x, r);
+	dprintk(" crush_bucket_choose %d x=%d r=%d\n", in->id, x, r);
 	switch (in->alg) {
 	case CRUSH_BUCKET_UNIFORM:
 		return bucket_uniform_choose((struct crush_bucket_uniform *)in,
@@ -264,7 +264,7 @@
  */
 static int is_out(struct crush_map *map, __u32 *weight, int item, int x)
 {
-	if (weight[item] >= 0x1000)
+	if (weight[item] >= 0x10000)
 		return 0;
 	if (weight[item] == 0)
 		return 1;
@@ -305,7 +305,9 @@
 	int itemtype;
 	int collide, reject;
 	const int orig_tries = 5; /* attempts before we fall back to search */
-	dprintk("choose bucket %d x %d outpos %d\n", bucket->id, x, outpos);
+
+	dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d\n", recurse_to_leaf ? "_LEAF" : "",
+		bucket->id, x, outpos, numrep);
 
 	for (rep = outpos; rep < numrep; rep++) {
 		/* keep trying until we get a non-out, non-colliding item */
@@ -366,6 +368,7 @@
 					BUG_ON(item >= 0 ||
 					       (-1-item) >= map->max_buckets);
 					in = map->buckets[-1-item];
+					retry_bucket = 1;
 					continue;
 				}
 
@@ -377,15 +380,25 @@
 					}
 				}
 
-				if (recurse_to_leaf &&
-				    item < 0 &&
-				    crush_choose(map, map->buckets[-1-item],
-						 weight,
-						 x, outpos+1, 0,
-						 out2, outpos,
-						 firstn, 0, NULL) <= outpos) {
-					reject = 1;
-				} else {
+				reject = 0;
+				if (recurse_to_leaf) {
+					if (item < 0) {
+						if (crush_choose(map,
+							 map->buckets[-1-item],
+							 weight,
+							 x, outpos+1, 0,
+							 out2, outpos,
+							 firstn, 0,
+							 NULL) <= outpos)
+							/* didn't get leaf */
+							reject = 1;
+					} else {
+						/* we already have a leaf! */
+						out2[outpos] = item;
+					}
+				}
+
+				if (!reject) {
 					/* out? */
 					if (itemtype == 0)
 						reject = is_out(map, weight,
@@ -424,12 +437,12 @@
 			continue;
 		}
 
-		dprintk("choose got %d\n", item);
+		dprintk("CHOOSE got %d\n", item);
 		out[outpos] = item;
 		outpos++;
 	}
 
-	dprintk("choose returns %d\n", outpos);
+	dprintk("CHOOSE returns %d\n", outpos);
 	return outpos;
 }
 
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
index 3be33fb..f2f5332 100644
--- a/fs/ceph/debugfs.c
+++ b/fs/ceph/debugfs.c
@@ -261,7 +261,7 @@
 
 static int caps_show(struct seq_file *s, void *p)
 {
-	struct ceph_client *client = p;
+	struct ceph_client *client = s->private;
 	int total, avail, used, reserved, min;
 
 	ceph_reservation_status(client, &total, &avail, &used, &reserved, &min);
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index f857193..f94ed3c 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -266,6 +266,7 @@
 	spin_lock(&inode->i_lock);
 	if ((filp->f_pos == 2 || fi->dentry) &&
 	    !ceph_test_opt(client, NOASYNCREADDIR) &&
+	    ceph_snap(inode) != CEPH_SNAPDIR &&
 	    (ci->i_ceph_flags & CEPH_I_COMPLETE) &&
 	    __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
 		err = __dcache_readdir(filp, dirent, filldir);
@@ -1013,18 +1014,22 @@
 
 /*
  * When a dentry is released, clear the dir I_COMPLETE if it was part
- * of the current dir gen.
+ * of the current dir gen or if this is in the snapshot namespace.
  */
 static void ceph_dentry_release(struct dentry *dentry)
 {
 	struct ceph_dentry_info *di = ceph_dentry(dentry);
 	struct inode *parent_inode = dentry->d_parent->d_inode;
+	u64 snapid = ceph_snap(parent_inode);
 
-	if (parent_inode) {
+	dout("dentry_release %p parent %p\n", dentry, parent_inode);
+
+	if (parent_inode && snapid != CEPH_SNAPDIR) {
 		struct ceph_inode_info *ci = ceph_inode(parent_inode);
 
 		spin_lock(&parent_inode->i_lock);
-		if (ci->i_shared_gen == di->lease_shared_gen) {
+		if (ci->i_shared_gen == di->lease_shared_gen ||
+		    snapid <= CEPH_MAXSNAP) {
 			dout(" clearing %p complete (d_release)\n",
 			     parent_inode);
 			ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
@@ -1241,7 +1246,9 @@
 
 struct dentry_operations ceph_snapdir_dentry_ops = {
 	.d_revalidate = ceph_snapdir_d_revalidate,
+	.d_release = ceph_dentry_release,
 };
 
 struct dentry_operations ceph_snap_dentry_ops = {
+	.d_release = ceph_dentry_release,
 };
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 6251a15..7c08698 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -265,7 +265,7 @@
 	kmem_cache_free(ceph_file_cachep, cf);
 
 	/* wake up anyone waiting for caps on this inode */
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	return 0;
 }
 
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 226f5a5..389f9db 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -827,7 +827,7 @@
 
 	spin_lock(&dcache_lock);
 	spin_lock(&dn->d_lock);
-	list_move_tail(&dir->d_subdirs, &dn->d_u.d_child);
+	list_move(&dn->d_u.d_child, &dir->d_subdirs);
 	dout("set_dentry_offset %p %lld (%p %p)\n", dn, di->offset,
 	     dn->d_u.d_child.prev, dn->d_u.d_child.next);
 	spin_unlock(&dn->d_lock);
@@ -854,8 +854,8 @@
 		d_drop(dn);
 	realdn = d_materialise_unique(dn, in);
 	if (IS_ERR(realdn)) {
-		pr_err("splice_dentry error %p inode %p ino %llx.%llx\n",
-		       dn, in, ceph_vinop(in));
+		pr_err("splice_dentry error %ld %p inode %p ino %llx.%llx\n",
+		       PTR_ERR(realdn), dn, in, ceph_vinop(in));
 		if (prehash)
 			*prehash = false; /* don't rehash on error */
 		dn = realdn; /* note realdn contains the error */
@@ -1199,8 +1199,10 @@
 				goto out;
 			}
 			err = ceph_init_dentry(dn);
-			if (err < 0)
+			if (err < 0) {
+				dput(dn);
 				goto out;
+			}
 		} else if (dn->d_inode &&
 			   (ceph_ino(dn->d_inode) != vino.ino ||
 			    ceph_snap(dn->d_inode) != vino.snap)) {
@@ -1234,18 +1236,23 @@
 				goto out;
 			}
 			dn = splice_dentry(dn, in, NULL);
+			if (IS_ERR(dn))
+				dn = NULL;
 		}
 
 		if (fill_inode(in, &rinfo->dir_in[i], NULL, session,
 			       req->r_request_started, -1,
 			       &req->r_caps_reservation) < 0) {
 			pr_err("fill_inode badness on %p\n", in);
-			dput(dn);
-			continue;
+			goto next_item;
 		}
-		update_dentry_lease(dn, rinfo->dir_dlease[i],
-				    req->r_session, req->r_request_started);
-		dput(dn);
+		if (dn)
+			update_dentry_lease(dn, rinfo->dir_dlease[i],
+					    req->r_session,
+					    req->r_request_started);
+next_item:
+		if (dn)
+			dput(dn);
 	}
 	req->r_did_prepopulate = true;
 
@@ -1494,7 +1501,7 @@
 	if (wrbuffer_refs == 0)
 		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
 	if (wake)
-		wake_up(&ci->i_cap_wq);
+		wake_up_all(&ci->i_cap_wq);
 }
 
 
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index b49f128..dd440bd 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -868,7 +868,7 @@
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
-	wake_up(&ci->i_cap_wq);
+	wake_up_all(&ci->i_cap_wq);
 	if (arg) {
 		spin_lock(&inode->i_lock);
 		ci->i_wanted_max_size = 0;
@@ -1066,9 +1066,9 @@
  *
  * Called under s_mutex.
  */
-static int add_cap_releases(struct ceph_mds_client *mdsc,
-			    struct ceph_mds_session *session,
-			    int extra)
+int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+			  struct ceph_mds_session *session,
+			  int extra)
 {
 	struct ceph_msg *msg;
 	struct ceph_mds_cap_release *head;
@@ -1176,8 +1176,8 @@
 /*
  * called under s_mutex
  */
-static void send_cap_releases(struct ceph_mds_client *mdsc,
-		       struct ceph_mds_session *session)
+void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+			    struct ceph_mds_session *session)
 {
 	struct ceph_msg *msg;
 
@@ -1514,6 +1514,9 @@
 	ceph_encode_filepath(&p, end, ino1, path1);
 	ceph_encode_filepath(&p, end, ino2, path2);
 
+	/* make note of release offset, in case we need to replay */
+	req->r_request_release_offset = p - msg->front.iov_base;
+
 	/* cap releases */
 	releases = 0;
 	if (req->r_inode_drop)
@@ -1561,7 +1564,7 @@
 	if (req->r_callback)
 		req->r_callback(mdsc, req);
 	else
-		complete(&req->r_completion);
+		complete_all(&req->r_completion);
 }
 
 /*
@@ -1580,6 +1583,32 @@
 	dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
 	     req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
 
+	if (req->r_got_unsafe) {
+		/*
+		 * Replay.  Do not regenerate message (and rebuild
+		 * paths, etc.); just use the original message.
+		 * Rebuilding paths will break for renames because
+		 * d_move mangles the src name.
+		 */
+		msg = req->r_request;
+		rhead = msg->front.iov_base;
+
+		flags = le32_to_cpu(rhead->flags);
+		flags |= CEPH_MDS_FLAG_REPLAY;
+		rhead->flags = cpu_to_le32(flags);
+
+		if (req->r_target_inode)
+			rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+
+		rhead->num_retry = req->r_attempts - 1;
+
+		/* remove cap/dentry releases from message */
+		rhead->num_releases = 0;
+		msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
+		msg->front.iov_len = req->r_request_release_offset;
+		return 0;
+	}
+
 	if (req->r_request) {
 		ceph_msg_put(req->r_request);
 		req->r_request = NULL;
@@ -1601,13 +1630,9 @@
 	rhead->flags = cpu_to_le32(flags);
 	rhead->num_fwd = req->r_num_fwd;
 	rhead->num_retry = req->r_attempts - 1;
+	rhead->ino = 0;
 
 	dout(" r_locked_dir = %p\n", req->r_locked_dir);
-
-	if (req->r_target_inode && req->r_got_unsafe)
-		rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
-	else
-		rhead->ino = 0;
 	return 0;
 }
 
@@ -1907,7 +1932,7 @@
 	if (head->safe) {
 		req->r_got_safe = true;
 		__unregister_request(mdsc, req);
-		complete(&req->r_safe_completion);
+		complete_all(&req->r_safe_completion);
 
 		if (req->r_got_unsafe) {
 			/*
@@ -1922,7 +1947,7 @@
 
 			/* last unsafe request during umount? */
 			if (mdsc->stopping && !__get_oldest_req(mdsc))
-				complete(&mdsc->safe_umount_waiters);
+				complete_all(&mdsc->safe_umount_waiters);
 			mutex_unlock(&mdsc->mutex);
 			goto out;
 		}
@@ -1980,7 +2005,7 @@
 	}
 	mutex_unlock(&mdsc->mutex);
 
-	add_cap_releases(mdsc, req->r_session, -1);
+	ceph_add_cap_releases(mdsc, req->r_session, -1);
 	mutex_unlock(&session->s_mutex);
 
 	/* kick calling process */
@@ -2101,7 +2126,7 @@
 			pr_info("mds%d reconnect denied\n", session->s_mds);
 		remove_session_caps(session);
 		wake = 1; /* for good measure */
-		complete(&mdsc->session_close_waiters);
+		complete_all(&mdsc->session_close_waiters);
 		kick_requests(mdsc, mds);
 		break;
 
@@ -2433,6 +2458,7 @@
 	struct ceph_dentry_info *di;
 	int mds = session->s_mds;
 	struct ceph_mds_lease *h = msg->front.iov_base;
+	u32 seq;
 	struct ceph_vino vino;
 	int mask;
 	struct qstr dname;
@@ -2446,6 +2472,7 @@
 	vino.ino = le64_to_cpu(h->ino);
 	vino.snap = CEPH_NOSNAP;
 	mask = le16_to_cpu(h->mask);
+	seq = le32_to_cpu(h->seq);
 	dname.name = (void *)h + sizeof(*h) + sizeof(u32);
 	dname.len = msg->front.iov_len - sizeof(*h) - sizeof(u32);
 	if (dname.len != get_unaligned_le32(h+1))
@@ -2456,8 +2483,9 @@
 
 	/* lookup inode */
 	inode = ceph_find_inode(sb, vino);
-	dout("handle_lease '%s', mask %d, ino %llx %p\n",
-	     ceph_lease_op_name(h->action), mask, vino.ino, inode);
+	dout("handle_lease %s, mask %d, ino %llx %p %.*s\n",
+	     ceph_lease_op_name(h->action), mask, vino.ino, inode,
+	     dname.len, dname.name);
 	if (inode == NULL) {
 		dout("handle_lease no inode %llx\n", vino.ino);
 		goto release;
@@ -2482,7 +2510,8 @@
 	switch (h->action) {
 	case CEPH_MDS_LEASE_REVOKE:
 		if (di && di->lease_session == session) {
-			h->seq = cpu_to_le32(di->lease_seq);
+			if (ceph_seq_cmp(di->lease_seq, seq) > 0)
+				h->seq = cpu_to_le32(di->lease_seq);
 			__ceph_mdsc_drop_dentry_lease(dentry);
 		}
 		release = 1;
@@ -2496,7 +2525,7 @@
 			unsigned long duration =
 				le32_to_cpu(h->duration_ms) * HZ / 1000;
 
-			di->lease_seq = le32_to_cpu(h->seq);
+			di->lease_seq = seq;
 			dentry->d_time = di->lease_renew_from + duration;
 			di->lease_renew_after = di->lease_renew_from +
 				(duration >> 1);
@@ -2686,10 +2715,10 @@
 			send_renew_caps(mdsc, s);
 		else
 			ceph_con_keepalive(&s->s_con);
-		add_cap_releases(mdsc, s, -1);
+		ceph_add_cap_releases(mdsc, s, -1);
 		if (s->s_state == CEPH_MDS_SESSION_OPEN ||
 		    s->s_state == CEPH_MDS_SESSION_HUNG)
-			send_cap_releases(mdsc, s);
+			ceph_send_cap_releases(mdsc, s);
 		mutex_unlock(&s->s_mutex);
 		ceph_put_mds_session(s);
 
@@ -2779,6 +2808,12 @@
 	drop_leases(mdsc);
 	ceph_flush_dirty_caps(mdsc);
 	wait_requests(mdsc);
+
+	/*
+	 * wait for reply handlers to drop their request refs and
+	 * their inode/dcache refs
+	 */
+	ceph_msgr_flush();
 }
 
 /*
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index d9936c4f..952410c 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -188,6 +188,7 @@
 	int r_old_inode_drop, r_old_inode_unless;
 
 	struct ceph_msg  *r_request;  /* original request */
+	int r_request_release_offset;
 	struct ceph_msg  *r_reply;
 	struct ceph_mds_reply_info_parsed r_reply_info;
 	int r_err;
@@ -322,6 +323,12 @@
 	kref_put(&req->r_kref, ceph_mdsc_release_request);
 }
 
+extern int ceph_add_cap_releases(struct ceph_mds_client *mdsc,
+				 struct ceph_mds_session *session,
+				 int extra);
+extern void ceph_send_cap_releases(struct ceph_mds_client *mdsc,
+				   struct ceph_mds_session *session);
+
 extern void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc);
 
 extern char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index 64b8b1f..15167b2 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -43,7 +43,8 @@
  * nicely render a sockaddr as a string.
  */
 #define MAX_ADDR_STR 20
-static char addr_str[MAX_ADDR_STR][40];
+#define MAX_ADDR_STR_LEN 60
+static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN];
 static DEFINE_SPINLOCK(addr_str_lock);
 static int last_addr_str;
 
@@ -52,7 +53,6 @@
 	int i;
 	char *s;
 	struct sockaddr_in *in4 = (void *)ss;
-	unsigned char *quad = (void *)&in4->sin_addr.s_addr;
 	struct sockaddr_in6 *in6 = (void *)ss;
 
 	spin_lock(&addr_str_lock);
@@ -64,25 +64,13 @@
 
 	switch (ss->ss_family) {
 	case AF_INET:
-		sprintf(s, "%u.%u.%u.%u:%u",
-			(unsigned int)quad[0],
-			(unsigned int)quad[1],
-			(unsigned int)quad[2],
-			(unsigned int)quad[3],
-			(unsigned int)ntohs(in4->sin_port));
+		snprintf(s, MAX_ADDR_STR_LEN, "%pI4:%u", &in4->sin_addr,
+			 (unsigned int)ntohs(in4->sin_port));
 		break;
 
 	case AF_INET6:
-		sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
-			in6->sin6_addr.s6_addr16[0],
-			in6->sin6_addr.s6_addr16[1],
-			in6->sin6_addr.s6_addr16[2],
-			in6->sin6_addr.s6_addr16[3],
-			in6->sin6_addr.s6_addr16[4],
-			in6->sin6_addr.s6_addr16[5],
-			in6->sin6_addr.s6_addr16[6],
-			in6->sin6_addr.s6_addr16[7],
-			(unsigned int)ntohs(in6->sin6_port));
+		snprintf(s, MAX_ADDR_STR_LEN, "[%pI6c]:%u", &in6->sin6_addr,
+			 (unsigned int)ntohs(in6->sin6_port));
 		break;
 
 	default:
@@ -215,12 +203,13 @@
  */
 static struct socket *ceph_tcp_connect(struct ceph_connection *con)
 {
-	struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+	struct sockaddr_storage *paddr = &con->peer_addr.in_addr;
 	struct socket *sock;
 	int ret;
 
 	BUG_ON(con->sock);
-	ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+	ret = sock_create_kern(con->peer_addr.in_addr.ss_family, SOCK_STREAM,
+			       IPPROTO_TCP, &sock);
 	if (ret)
 		return ERR_PTR(ret);
 	con->sock = sock;
@@ -234,7 +223,8 @@
 
 	dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
 
-	ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+	ret = sock->ops->connect(sock, (struct sockaddr *)paddr, sizeof(*paddr),
+				 O_NONBLOCK);
 	if (ret == -EINPROGRESS) {
 		dout("connect %s EINPROGRESS sk_state = %u\n",
 		     pr_addr(&con->peer_addr.in_addr),
@@ -657,7 +647,7 @@
 	dout("prepare_write_connect %p cseq=%d gseq=%d proto=%d\n", con,
 	     con->connect_seq, global_seq, proto);
 
-	con->out_connect.features = CEPH_FEATURE_SUPPORTED_CLIENT;
+	con->out_connect.features = cpu_to_le64(CEPH_FEATURE_SUPPORTED_CLIENT);
 	con->out_connect.host_type = cpu_to_le32(CEPH_ENTITY_TYPE_CLIENT);
 	con->out_connect.connect_seq = cpu_to_le32(con->connect_seq);
 	con->out_connect.global_seq = cpu_to_le32(global_seq);
@@ -1009,19 +999,32 @@
 		struct sockaddr_in *in4 = (void *)ss;
 		struct sockaddr_in6 *in6 = (void *)ss;
 		int port;
+		char delim = ',';
+
+		if (*p == '[') {
+			delim = ']';
+			p++;
+		}
 
 		memset(ss, 0, sizeof(*ss));
 		if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
-			     ',', &ipend)) {
+			     delim, &ipend))
 			ss->ss_family = AF_INET;
-		} else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
-				    ',', &ipend)) {
+		else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+				  delim, &ipend))
 			ss->ss_family = AF_INET6;
-		} else {
+		else
 			goto bad;
-		}
 		p = ipend;
 
+		if (delim == ']') {
+			if (*p != ']') {
+				dout("missing matching ']'\n");
+				goto bad;
+			}
+			p++;
+		}
+
 		/* port? */
 		if (p < end && *p == ':') {
 			port = 0;
@@ -1055,7 +1058,7 @@
 	return 0;
 
 bad:
-	pr_err("parse_ips bad ip '%s'\n", c);
+	pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
 	return -EINVAL;
 }
 
@@ -1396,10 +1399,12 @@
 	if (!con->in_msg) {
 		dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
 		     con->in_hdr.front_len, con->in_hdr.data_len);
+		skip = 0;
 		con->in_msg = ceph_alloc_msg(con, &con->in_hdr, &skip);
 		if (skip) {
 			/* skip this message */
 			dout("alloc_msg said skip message\n");
+			BUG_ON(con->in_msg);
 			con->in_base_pos = -front_len - middle_len - data_len -
 				sizeof(m->footer);
 			con->in_tag = CEPH_MSGR_TAG_READY;
@@ -2013,20 +2018,20 @@
 {
 	mutex_lock(&con->mutex);
 	if (!list_empty(&msg->list_head)) {
-		dout("con_revoke %p msg %p\n", con, msg);
+		dout("con_revoke %p msg %p - was on queue\n", con, msg);
 		list_del_init(&msg->list_head);
 		ceph_msg_put(msg);
 		msg->hdr.seq = 0;
-		if (con->out_msg == msg) {
-			ceph_msg_put(con->out_msg);
-			con->out_msg = NULL;
-		}
+	}
+	if (con->out_msg == msg) {
+		dout("con_revoke %p msg %p - was sending\n", con, msg);
+		con->out_msg = NULL;
 		if (con->out_kvec_is_msg) {
 			con->out_skip = con->out_kvec_bytes;
 			con->out_kvec_is_msg = false;
 		}
-	} else {
-		dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+		ceph_msg_put(msg);
+		msg->hdr.seq = 0;
 	}
 	mutex_unlock(&con->mutex);
 }
diff --git a/fs/ceph/mon_client.c b/fs/ceph/mon_client.c
index 21c62e9..54fe01c 100644
--- a/fs/ceph/mon_client.c
+++ b/fs/ceph/mon_client.c
@@ -345,7 +345,7 @@
 
 out:
 	mutex_unlock(&monc->mutex);
-	wake_up(&client->auth_wq);
+	wake_up_all(&client->auth_wq);
 }
 
 /*
@@ -400,6 +400,8 @@
 		ceph_msg_put(req->reply);
 	if (req->request)
 		ceph_msg_put(req->request);
+
+	kfree(req);
 }
 
 static void put_generic_request(struct ceph_mon_generic_request *req)
@@ -460,7 +462,7 @@
 	}
 	mutex_unlock(&monc->mutex);
 	if (req) {
-		complete(&req->completion);
+		complete_all(&req->completion);
 		put_generic_request(req);
 	}
 	return;
@@ -716,14 +718,15 @@
 				     monc->m_auth->front_max);
 	if (ret < 0) {
 		monc->client->auth_err = ret;
-		wake_up(&monc->client->auth_wq);
+		wake_up_all(&monc->client->auth_wq);
 	} else if (ret > 0) {
 		__send_prepared_auth_request(monc, ret);
 	} else if (!was_auth && monc->auth->ops->is_authenticated(monc->auth)) {
 		dout("authenticated, starting session\n");
 
 		monc->client->msgr->inst.name.type = CEPH_ENTITY_TYPE_CLIENT;
-		monc->client->msgr->inst.name.num = monc->auth->global_id;
+		monc->client->msgr->inst.name.num =
+					cpu_to_le64(monc->auth->global_id);
 
 		__send_subscribe(monc);
 		__resend_generic_request(monc);
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index d25b4ad..e385223 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -862,12 +862,12 @@
 	if (req->r_callback)
 		req->r_callback(req, msg);
 	else
-		complete(&req->r_completion);
+		complete_all(&req->r_completion);
 
 	if (flags & CEPH_OSD_FLAG_ONDISK) {
 		if (req->r_safe_callback)
 			req->r_safe_callback(req, msg);
-		complete(&req->r_safe_completion);  /* fsync waiter */
+		complete_all(&req->r_safe_completion);  /* fsync waiter */
 	}
 
 done:
@@ -1083,7 +1083,7 @@
 	if (newmap)
 		kick_requests(osdc, NULL);
 	up_read(&osdc->map_sem);
-	wake_up(&osdc->client->auth_wq);
+	wake_up_all(&osdc->client->auth_wq);
 	return;
 
 bad:
@@ -1344,7 +1344,7 @@
 	int type = le16_to_cpu(msg->hdr.type);
 
 	if (!osd)
-		return;
+		goto out;
 	osdc = osd->o_osdc;
 
 	switch (type) {
@@ -1359,6 +1359,7 @@
 		pr_err("received unknown message type %d %s\n", type,
 		       ceph_msg_type_name(type));
 	}
+out:
 	ceph_msg_put(msg);
 }
 
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
index ddc656f..416d46a 100644
--- a/fs/ceph/osdmap.c
+++ b/fs/ceph/osdmap.c
@@ -568,6 +568,7 @@
 		if (ev > CEPH_PG_POOL_VERSION) {
 			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
 				   ev, CEPH_PG_POOL_VERSION);
+			kfree(pi);
 			goto bad;
 		}
 		__decode_pool(p, pi);
@@ -707,6 +708,7 @@
 		newcrush = crush_decode(*p, min(*p+len, end));
 		if (IS_ERR(newcrush))
 			return ERR_CAST(newcrush);
+		*p += len;
 	}
 
 	/* new flags? */
@@ -829,12 +831,13 @@
 		/* remove any? */
 		while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
 						node)->pgid, pgid) <= 0) {
-			struct rb_node *cur = rbp;
+			struct ceph_pg_mapping *cur =
+				rb_entry(rbp, struct ceph_pg_mapping, node);
+			
 			rbp = rb_next(rbp);
-			dout(" removed pg_temp %llx\n",
-			     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
-					       node)->pgid);
-			rb_erase(cur, &map->pg_temp);
+			dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+			rb_erase(&cur->node, &map->pg_temp);
+			kfree(cur);
 		}
 
 		if (pglen) {
@@ -850,19 +853,22 @@
 			for (j = 0; j < pglen; j++)
 				pg->osds[j] = ceph_decode_32(p);
 			err = __insert_pg_mapping(pg, &map->pg_temp);
-			if (err)
+			if (err) {
+				kfree(pg);
 				goto bad;
+			}
 			dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
 			     pglen);
 		}
 	}
 	while (rbp) {
-		struct rb_node *cur = rbp;
+		struct ceph_pg_mapping *cur =
+			rb_entry(rbp, struct ceph_pg_mapping, node);
+
 		rbp = rb_next(rbp);
-		dout(" removed pg_temp %llx\n",
-		     *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
-				       node)->pgid);
-		rb_erase(cur, &map->pg_temp);
+		dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+		rb_erase(&cur->node, &map->pg_temp);
+		kfree(cur);
 	}
 
 	/* ignore the rest */
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 4e0bee2..fa87f51 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -89,7 +89,7 @@
 
 	buf->f_files = le64_to_cpu(st.num_objects);
 	buf->f_ffree = -1;
-	buf->f_namelen = PATH_MAX;
+	buf->f_namelen = NAME_MAX;
 	buf->f_frsize = PAGE_CACHE_SIZE;
 
 	/* leave fsid little-endian, regardless of host endianness */
@@ -926,7 +926,7 @@
 /*
  * construct our own bdi so we can control readahead, etc.
  */
-static atomic_long_t bdi_seq = ATOMIC_INIT(0);
+static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
 
 static int ceph_register_bdi(struct super_block *sb, struct ceph_client *client)
 {
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 80f3525..5739fd7 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -131,6 +131,15 @@
 	    IP addresses) which is needed for implicit mounts of DFS junction
 	    points. If unsure, say N.
 
+config CIFS_FSCACHE
+	  bool "Provide CIFS client caching support (EXPERIMENTAL)"
+	  depends on EXPERIMENTAL
+	  depends on CIFS=m && FSCACHE || CIFS=y && FSCACHE=y
+	  help
+	    Makes CIFS FS-Cache capable. Say Y here if you want your CIFS data
+	    to be cached locally on disk through the general filesystem cache
+	    manager. If unsure, say N.
+
 config CIFS_EXPERIMENTAL
 	  bool "CIFS Experimental Features (EXPERIMENTAL)"
 	  depends on CIFS && EXPERIMENTAL
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index 9948c003..adefa60 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -11,3 +11,5 @@
 cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
 
 cifs-$(CONFIG_CIFS_DFS_UPCALL) += dns_resolve.o cifs_dfs_ref.o
+
+cifs-$(CONFIG_CIFS_FSCACHE) += fscache.o cache.o
diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c
new file mode 100644
index 0000000..224d7bbd
--- /dev/null
+++ b/fs/cifs/cache.c
@@ -0,0 +1,331 @@
+/*
+ *   fs/cifs/cache.c - CIFS filesystem cache index structure definitions
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Authors(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include "fscache.h"
+#include "cifs_debug.h"
+
+/*
+ * CIFS filesystem definition for FS-Cache
+ */
+struct fscache_netfs cifs_fscache_netfs = {
+	.name = "cifs",
+	.version = 0,
+};
+
+/*
+ * Register CIFS for caching with FS-Cache
+ */
+int cifs_fscache_register(void)
+{
+	return fscache_register_netfs(&cifs_fscache_netfs);
+}
+
+/*
+ * Unregister CIFS for caching
+ */
+void cifs_fscache_unregister(void)
+{
+	fscache_unregister_netfs(&cifs_fscache_netfs);
+}
+
+/*
+ * Key layout of CIFS server cache index object
+ */
+struct cifs_server_key {
+	uint16_t	family;		/* address family */
+	uint16_t	port;		/* IP port */
+	union {
+		struct in_addr	ipv4_addr;
+		struct in6_addr	ipv6_addr;
+	} addr[0];
+};
+
+/*
+ * Server object keyed by {IPaddress,port,family} tuple
+ */
+static uint16_t cifs_server_get_key(const void *cookie_netfs_data,
+				   void *buffer, uint16_t maxbuf)
+{
+	const struct TCP_Server_Info *server = cookie_netfs_data;
+	const struct sockaddr *sa = (struct sockaddr *) &server->addr.sockAddr;
+	struct cifs_server_key *key = buffer;
+	uint16_t key_len = sizeof(struct cifs_server_key);
+
+	memset(key, 0, key_len);
+
+	/*
+	 * Should not be a problem as sin_family/sin6_family overlays
+	 * sa_family field
+	 */
+	switch (sa->sa_family) {
+	case AF_INET:
+		key->family = server->addr.sockAddr.sin_family;
+		key->port = server->addr.sockAddr.sin_port;
+		key->addr[0].ipv4_addr = server->addr.sockAddr.sin_addr;
+		key_len += sizeof(key->addr[0].ipv4_addr);
+		break;
+
+	case AF_INET6:
+		key->family = server->addr.sockAddr6.sin6_family;
+		key->port = server->addr.sockAddr6.sin6_port;
+		key->addr[0].ipv6_addr = server->addr.sockAddr6.sin6_addr;
+		key_len += sizeof(key->addr[0].ipv6_addr);
+		break;
+
+	default:
+		cERROR(1, "CIFS: Unknown network family '%d'", sa->sa_family);
+		key_len = 0;
+		break;
+	}
+
+	return key_len;
+}
+
+/*
+ * Server object for FS-Cache
+ */
+const struct fscache_cookie_def cifs_fscache_server_index_def = {
+	.name = "CIFS.server",
+	.type = FSCACHE_COOKIE_TYPE_INDEX,
+	.get_key = cifs_server_get_key,
+};
+
+/*
+ * Auxiliary data attached to CIFS superblock within the cache
+ */
+struct cifs_fscache_super_auxdata {
+	u64	resource_id;		/* unique server resource id */
+};
+
+static char *extract_sharename(const char *treename)
+{
+	const char *src;
+	char *delim, *dst;
+	int len;
+
+	/* skip double chars at the beginning */
+	src = treename + 2;
+
+	/* share name is always preceded by '\\' now */
+	delim = strchr(src, '\\');
+	if (!delim)
+		return ERR_PTR(-EINVAL);
+	delim++;
+	len = strlen(delim);
+
+	/* caller has to free the memory */
+	dst = kstrndup(delim, len, GFP_KERNEL);
+	if (!dst)
+		return ERR_PTR(-ENOMEM);
+
+	return dst;
+}
+
+/*
+ * Superblock object currently keyed by share name
+ */
+static uint16_t cifs_super_get_key(const void *cookie_netfs_data, void *buffer,
+				   uint16_t maxbuf)
+{
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+	char *sharename;
+	uint16_t len;
+
+	sharename = extract_sharename(tcon->treeName);
+	if (IS_ERR(sharename)) {
+		cFYI(1, "CIFS: couldn't extract sharename\n");
+		sharename = NULL;
+		return 0;
+	}
+
+	len = strlen(sharename);
+	if (len > maxbuf)
+		return 0;
+
+	memcpy(buffer, sharename, len);
+
+	kfree(sharename);
+
+	return len;
+}
+
+static uint16_t
+cifs_fscache_super_get_aux(const void *cookie_netfs_data, void *buffer,
+			   uint16_t maxbuf)
+{
+	struct cifs_fscache_super_auxdata auxdata;
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.resource_id = tcon->resource_id;
+
+	if (maxbuf > sizeof(auxdata))
+		maxbuf = sizeof(auxdata);
+
+	memcpy(buffer, &auxdata, maxbuf);
+
+	return maxbuf;
+}
+
+static enum
+fscache_checkaux cifs_fscache_super_check_aux(void *cookie_netfs_data,
+					      const void *data,
+					      uint16_t datalen)
+{
+	struct cifs_fscache_super_auxdata auxdata;
+	const struct cifsTconInfo *tcon = cookie_netfs_data;
+
+	if (datalen != sizeof(auxdata))
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.resource_id = tcon->resource_id;
+
+	if (memcmp(data, &auxdata, datalen) != 0)
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	return FSCACHE_CHECKAUX_OKAY;
+}
+
+/*
+ * Superblock object for FS-Cache
+ */
+const struct fscache_cookie_def cifs_fscache_super_index_def = {
+	.name = "CIFS.super",
+	.type = FSCACHE_COOKIE_TYPE_INDEX,
+	.get_key = cifs_super_get_key,
+	.get_aux = cifs_fscache_super_get_aux,
+	.check_aux = cifs_fscache_super_check_aux,
+};
+
+/*
+ * Auxiliary data attached to CIFS inode within the cache
+ */
+struct cifs_fscache_inode_auxdata {
+	struct timespec	last_write_time;
+	struct timespec	last_change_time;
+	u64		eof;
+};
+
+static uint16_t cifs_fscache_inode_get_key(const void *cookie_netfs_data,
+					   void *buffer, uint16_t maxbuf)
+{
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+	uint16_t keylen;
+
+	/* use the UniqueId as the key */
+	keylen = sizeof(cifsi->uniqueid);
+	if (keylen > maxbuf)
+		keylen = 0;
+	else
+		memcpy(buffer, &cifsi->uniqueid, keylen);
+
+	return keylen;
+}
+
+static void
+cifs_fscache_inode_get_attr(const void *cookie_netfs_data, uint64_t *size)
+{
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	*size = cifsi->vfs_inode.i_size;
+}
+
+static uint16_t
+cifs_fscache_inode_get_aux(const void *cookie_netfs_data, void *buffer,
+			   uint16_t maxbuf)
+{
+	struct cifs_fscache_inode_auxdata auxdata;
+	const struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.eof = cifsi->server_eof;
+	auxdata.last_write_time = cifsi->vfs_inode.i_mtime;
+	auxdata.last_change_time = cifsi->vfs_inode.i_ctime;
+
+	if (maxbuf > sizeof(auxdata))
+		maxbuf = sizeof(auxdata);
+
+	memcpy(buffer, &auxdata, maxbuf);
+
+	return maxbuf;
+}
+
+static enum
+fscache_checkaux cifs_fscache_inode_check_aux(void *cookie_netfs_data,
+					      const void *data,
+					      uint16_t datalen)
+{
+	struct cifs_fscache_inode_auxdata auxdata;
+	struct cifsInodeInfo *cifsi = cookie_netfs_data;
+
+	if (datalen != sizeof(auxdata))
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	memset(&auxdata, 0, sizeof(auxdata));
+	auxdata.eof = cifsi->server_eof;
+	auxdata.last_write_time = cifsi->vfs_inode.i_mtime;
+	auxdata.last_change_time = cifsi->vfs_inode.i_ctime;
+
+	if (memcmp(data, &auxdata, datalen) != 0)
+		return FSCACHE_CHECKAUX_OBSOLETE;
+
+	return FSCACHE_CHECKAUX_OKAY;
+}
+
+static void cifs_fscache_inode_now_uncached(void *cookie_netfs_data)
+{
+	struct cifsInodeInfo *cifsi = cookie_netfs_data;
+	struct pagevec pvec;
+	pgoff_t first;
+	int loop, nr_pages;
+
+	pagevec_init(&pvec, 0);
+	first = 0;
+
+	cFYI(1, "cifs inode 0x%p now uncached", cifsi);
+
+	for (;;) {
+		nr_pages = pagevec_lookup(&pvec,
+					  cifsi->vfs_inode.i_mapping, first,
+					  PAGEVEC_SIZE - pagevec_count(&pvec));
+		if (!nr_pages)
+			break;
+
+		for (loop = 0; loop < nr_pages; loop++)
+			ClearPageFsCache(pvec.pages[loop]);
+
+		first = pvec.pages[nr_pages - 1]->index + 1;
+
+		pvec.nr = nr_pages;
+		pagevec_release(&pvec);
+		cond_resched();
+	}
+}
+
+const struct fscache_cookie_def cifs_fscache_inode_object_def = {
+	.name		= "CIFS.uniqueid",
+	.type		= FSCACHE_COOKIE_TYPE_DATAFILE,
+	.get_key	= cifs_fscache_inode_get_key,
+	.get_attr	= cifs_fscache_inode_get_attr,
+	.get_aux	= cifs_fscache_inode_get_aux,
+	.check_aux	= cifs_fscache_inode_check_aux,
+	.now_uncached	= cifs_fscache_inode_now_uncached,
+};
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index ac19a6f..dc1ed50 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -230,28 +230,22 @@
 	goto compose_mount_options_out;
 }
 
-
-static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent,
-		struct dentry *dentry, const struct dfs_info3_param *ref)
+/**
+ * cifs_dfs_do_refmount - mounts specified path using provided refferal
+ * @cifs_sb:		parent/root superblock
+ * @fullpath:		full path in UNC format
+ * @ref:		server's referral
+ */
+static struct vfsmount *cifs_dfs_do_refmount(struct cifs_sb_info *cifs_sb,
+		const char *fullpath, const struct dfs_info3_param *ref)
 {
-	struct cifs_sb_info *cifs_sb;
 	struct vfsmount *mnt;
 	char *mountdata;
 	char *devname = NULL;
-	char *fullpath;
 
-	cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
-	/*
-	 * this function gives us a path with a double backslash prefix. We
-	 * require a single backslash for DFS.
-	 */
-	fullpath = build_path_from_dentry(dentry);
-	if (!fullpath)
-		return ERR_PTR(-ENOMEM);
-
+	/* strip first '\' from fullpath */
 	mountdata = cifs_compose_mount_options(cifs_sb->mountdata,
 			fullpath + 1, ref, &devname);
-	kfree(fullpath);
 
 	if (IS_ERR(mountdata))
 		return (struct vfsmount *)mountdata;
@@ -357,8 +351,8 @@
 			rc = -EINVAL;
 			goto out_err;
 		}
-		mnt = cifs_dfs_do_refmount(nd->path.mnt,
-				nd->path.dentry, referrals + i);
+		mnt = cifs_dfs_do_refmount(cifs_sb,
+				full_path, referrals + i);
 		cFYI(1, "%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
 					referrals[i].node_name, mnt);
 
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 246a167..9e77145 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -35,6 +35,7 @@
 #define CIFS_MOUNT_DYNPERM      0x1000 /* allow in-memory only mode setting   */
 #define CIFS_MOUNT_NOPOSIXBRL   0x2000 /* mandatory not posix byte range lock */
 #define CIFS_MOUNT_NOSSYNC      0x4000 /* don't do slow SMBflush on every sync*/
+#define CIFS_MOUNT_FSCACHE	0x8000 /* local caching enabled */
 
 struct cifs_sb_info {
 	struct cifsTconInfo *tcon;	/* primary mount */
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 379bd7d..6effccf 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -144,6 +144,9 @@
 	sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
 
 	dp = description + strlen(description);
+	sprintf(dp, ";creduid=0x%x", sesInfo->cred_uid);
+
+	dp = description + strlen(description);
 	sprintf(dp, ";user=%s", sesInfo->userName);
 
 	dp = description + strlen(description);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 78c02eb..8a2cf129 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -47,6 +47,7 @@
 #include <linux/key-type.h>
 #include "dns_resolve.h"
 #include "cifs_spnego.h"
+#include "fscache.h"
 #define CIFS_MAGIC_NUMBER 0xFF534D42	/* the first four bytes of SMB PDUs */
 
 int cifsFYI = 0;
@@ -329,6 +330,12 @@
 }
 
 static void
+cifs_clear_inode(struct inode *inode)
+{
+	cifs_fscache_release_inode_cookie(inode);
+}
+
+static void
 cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
 {
 	seq_printf(s, ",addr=");
@@ -473,14 +480,25 @@
 	return 0;
 }
 
+void cifs_drop_inode(struct inode *inode)
+{
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+		return generic_drop_inode(inode);
+
+	return generic_delete_inode(inode);
+}
+
 static const struct super_operations cifs_super_ops = {
 	.put_super = cifs_put_super,
 	.statfs = cifs_statfs,
 	.alloc_inode = cifs_alloc_inode,
 	.destroy_inode = cifs_destroy_inode,
-/*	.drop_inode	    = generic_delete_inode,
-	.delete_inode	= cifs_delete_inode,  */  /* Do not need above two
-	functions unless later we add lazy close of inodes or unless the
+	.drop_inode	= cifs_drop_inode,
+	.clear_inode	= cifs_clear_inode,
+/*	.delete_inode	= cifs_delete_inode,  */  /* Do not need above
+	function unless later we add lazy close of inodes or unless the
 	kernel forgets to call us with the same number of releases (closes)
 	as opens */
 	.show_options = cifs_show_options,
@@ -892,6 +910,10 @@
 		cFYI(1, "cifs_max_pending set to max of 256");
 	}
 
+	rc = cifs_fscache_register();
+	if (rc)
+		goto out;
+
 	rc = cifs_init_inodecache();
 	if (rc)
 		goto out_clean_proc;
@@ -913,7 +935,7 @@
 		goto out_unregister_filesystem;
 #endif
 #ifdef CONFIG_CIFS_DFS_UPCALL
-	rc = register_key_type(&key_type_dns_resolver);
+	rc = cifs_init_dns_resolver();
 	if (rc)
 		goto out_unregister_key_type;
 #endif
@@ -925,7 +947,7 @@
 
  out_unregister_resolver_key:
 #ifdef CONFIG_CIFS_DFS_UPCALL
-	unregister_key_type(&key_type_dns_resolver);
+	cifs_exit_dns_resolver();
  out_unregister_key_type:
 #endif
 #ifdef CONFIG_CIFS_UPCALL
@@ -941,6 +963,8 @@
 	cifs_destroy_inodecache();
  out_clean_proc:
 	cifs_proc_clean();
+	cifs_fscache_unregister();
+ out:
 	return rc;
 }
 
@@ -949,9 +973,10 @@
 {
 	cFYI(DBG2, "exit_cifs");
 	cifs_proc_clean();
+	cifs_fscache_unregister();
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	cifs_dfs_release_automount_timer();
-	unregister_key_type(&key_type_dns_resolver);
+	cifs_exit_dns_resolver();
 #endif
 #ifdef CONFIG_CIFS_UPCALL
 	unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index a7eb65c8..d82f5fb 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -114,5 +114,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.64"
+#define CIFS_VERSION   "1.65"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a88479c..5990614 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -16,6 +16,9 @@
  *   the GNU Lesser General Public License for more details.
  *
  */
+#ifndef _CIFS_GLOB_H
+#define _CIFS_GLOB_H
+
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/slab.h>
@@ -34,7 +37,7 @@
 #define MAX_SHARE_SIZE  64	/* used to be 20, this should still be enough */
 #define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
 				   termination then *2 for unicode versions */
-#define MAX_PASSWORD_SIZE 16
+#define MAX_PASSWORD_SIZE 512  /* max for windows seems to be 256 wide chars */
 
 #define CIFS_MIN_RCV_POOL 4
 
@@ -80,8 +83,7 @@
 };
 
 enum securityEnum {
-	PLAINTXT = 0, 		/* Legacy with Plaintext passwords */
-	LANMAN,			/* Legacy LANMAN auth */
+	LANMAN = 0,			/* Legacy LANMAN auth */
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
@@ -142,7 +144,6 @@
 	struct list_head pending_mid_q;
 	void *Server_NlsInfo;	/* BB - placeholder for future NLS info  */
 	unsigned short server_codepage;	/* codepage for the server    */
-	unsigned long ip_address;	/* IP addr for the server if known */
 	enum protocolEnum protocolType;
 	char versionMajor;
 	char versionMinor;
@@ -190,19 +191,9 @@
 	bool	sec_mskerberos;		/* supports legacy MS Kerberos */
 	bool	sec_kerberosu2u;	/* supports U2U Kerberos */
 	bool	sec_ntlmssp;		/* supports NTLMSSP */
-};
-
-/*
- * The following is our shortcut to user information.  We surface the uid,
- * and name. We always get the password on the fly in case it
- * has changed. We also hang a list of sessions owned by this user off here.
- */
-struct cifsUidInfo {
-	struct list_head userList;
-	struct list_head sessionList; /* SMB sessions for this user */
-	uid_t linux_uid;
-	char user[MAX_USERNAME_SIZE + 1];	/* ascii name of user */
-	/* BB may need ptr or callback for PAM or WinBind info */
+#ifdef CONFIG_CIFS_FSCACHE
+	struct fscache_cookie   *fscache; /* client index cache cookie */
+#endif
 };
 
 /*
@@ -212,9 +203,6 @@
 	struct list_head smb_ses_list;
 	struct list_head tcon_list;
 	struct mutex session_mutex;
-#if 0
-	struct cifsUidInfo *uidInfo;	/* pointer to user info */
-#endif
 	struct TCP_Server_Info *server;	/* pointer to server info */
 	int ses_count;		/* reference counter */
 	enum statusEnum status;
@@ -226,7 +214,8 @@
 	char *serverNOS;	/* name of network operating system of server */
 	char *serverDomain;	/* security realm of server */
 	int Suid;		/* remote smb uid  */
-	uid_t linux_uid;        /* local Linux uid */
+	uid_t linux_uid;        /* overriding owner of files on the mount */
+	uid_t cred_uid;		/* owner of credentials */
 	int capabilities;
 	char serverName[SERVER_NAME_LEN_WITH_NULL * 2];	/* BB make bigger for
 				TCP names - will ipv6 and sctp addresses fit? */
@@ -311,6 +300,10 @@
 	bool local_lease:1; /* check leases (only) on local system not remote */
 	bool broken_posix_open; /* e.g. Samba server versions < 3.3.2, 3.2.9 */
 	bool need_reconnect:1; /* connection reset, tid now invalid */
+#ifdef CONFIG_CIFS_FSCACHE
+	u64 resource_id;		/* server resource id */
+	struct fscache_cookie *fscache;	/* cookie for share */
+#endif
 	/* BB add field for back pointer to sb struct(s)? */
 };
 
@@ -398,6 +391,9 @@
 	bool invalid_mapping:1;		/* pagecache is invalid */
 	u64  server_eof;		/* current file size on server */
 	u64  uniqueid;			/* server inode number */
+#ifdef CONFIG_CIFS_FSCACHE
+	struct fscache_cookie *fscache;
+#endif
 	struct inode vfs_inode;
 };
 
@@ -733,3 +729,5 @@
 GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 
 extern const struct slow_work_ops cifs_oplock_break_ops;
+
+#endif	/* _CIFS_GLOB_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index fb1657e..2eaebbd 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -86,7 +86,9 @@
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			struct TCP_Server_Info *server);
-extern int cifs_convert_address(char *src, void *dst);
+extern int cifs_convert_address(struct sockaddr *dst, char *src);
+extern int cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+				unsigned short int port);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
 			    const struct cifsTconInfo *, int /* length of
@@ -106,7 +108,6 @@
 				__u16 fileHandle, struct file *file,
 				struct vfsmount *mnt, unsigned int oflags);
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
-				struct vfsmount *mnt,
 				struct super_block *sb,
 				int mode, int oflags,
 				__u32 *poplock, __u16 *pnetfid, int xid);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2208f06..2a43a0a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -48,6 +48,7 @@
 #include "nterr.h"
 #include "rfc1002pdu.h"
 #include "cn_cifs.h"
+#include "fscache.h"
 
 #define CIFS_PORT 445
 #define RFC1001_PORT 139
@@ -66,6 +67,7 @@
 	char *iocharset;  /* local code page for mapping to and from Unicode */
 	char source_rfc1001_name[16]; /* netbios name of client */
 	char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
+	uid_t cred_uid;
 	uid_t linux_uid;
 	gid_t linux_gid;
 	mode_t file_mode;
@@ -97,6 +99,7 @@
 	bool noblocksnd:1;
 	bool noautotune:1;
 	bool nostrictsync:1; /* do not force expensive SMBflush on every sync */
+	bool fsc:1;	/* enable fscache */
 	unsigned int rsize;
 	unsigned int wsize;
 	bool sockopt_tcp_nodelay:1;
@@ -830,7 +833,8 @@
 	/* null target name indicates to use *SMBSERVR default called name
 	   if we end up sending RFC1001 session initialize */
 	vol->target_rfc1001_name[0] = 0;
-	vol->linux_uid = current_uid();  /* use current_euid() instead? */
+	vol->cred_uid = current_uid();
+	vol->linux_uid = current_uid();
 	vol->linux_gid = current_gid();
 
 	/* default to only allowing write access to owner of the mount */
@@ -1257,6 +1261,12 @@
 		} else if ((strnicmp(data, "nocase", 6) == 0) ||
 			   (strnicmp(data, "ignorecase", 10)  == 0)) {
 			vol->nocase = 1;
+		} else if (strnicmp(data, "mand", 4) == 0) {
+			/* ignore */
+		} else if (strnicmp(data, "nomand", 6) == 0) {
+			/* ignore */
+		} else if (strnicmp(data, "_netdev", 7) == 0) {
+			/* ignore */
 		} else if (strnicmp(data, "brl", 3) == 0) {
 			vol->nobrl =  0;
 		} else if ((strnicmp(data, "nobrl", 5) == 0) ||
@@ -1331,6 +1341,8 @@
 			printk(KERN_WARNING "CIFS: Mount option noac not "
 				"supported. Instead set "
 				"/proc/fs/cifs/LookupCacheEnabled to 0\n");
+		} else if (strnicmp(data, "fsc", 3) == 0) {
+			vol->fsc = true;
 		} else
 			printk(KERN_WARNING "CIFS: Unknown mount option %s\n",
 						data);
@@ -1380,18 +1392,92 @@
 	return 0;
 }
 
-static struct TCP_Server_Info *
-cifs_find_tcp_session(struct sockaddr_storage *addr, unsigned short int port)
+static bool
+match_address(struct TCP_Server_Info *server, struct sockaddr *addr)
 {
-	struct list_head *tmp;
+	struct sockaddr_in *addr4 = (struct sockaddr_in *)addr;
+	struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *)addr;
+
+	switch (addr->sa_family) {
+	case AF_INET:
+		if (addr4->sin_addr.s_addr !=
+		    server->addr.sockAddr.sin_addr.s_addr)
+			return false;
+		if (addr4->sin_port &&
+		    addr4->sin_port != server->addr.sockAddr.sin_port)
+			return false;
+		break;
+	case AF_INET6:
+		if (!ipv6_addr_equal(&addr6->sin6_addr,
+				     &server->addr.sockAddr6.sin6_addr))
+			return false;
+		if (addr6->sin6_scope_id !=
+		    server->addr.sockAddr6.sin6_scope_id)
+			return false;
+		if (addr6->sin6_port &&
+		    addr6->sin6_port != server->addr.sockAddr6.sin6_port)
+			return false;
+		break;
+	}
+
+	return true;
+}
+
+static bool
+match_security(struct TCP_Server_Info *server, struct smb_vol *vol)
+{
+	unsigned int secFlags;
+
+	if (vol->secFlg & (~(CIFSSEC_MUST_SIGN | CIFSSEC_MUST_SEAL)))
+		secFlags = vol->secFlg;
+	else
+		secFlags = global_secflags | vol->secFlg;
+
+	switch (server->secType) {
+	case LANMAN:
+		if (!(secFlags & (CIFSSEC_MAY_LANMAN|CIFSSEC_MAY_PLNTXT)))
+			return false;
+		break;
+	case NTLMv2:
+		if (!(secFlags & CIFSSEC_MAY_NTLMV2))
+			return false;
+		break;
+	case NTLM:
+		if (!(secFlags & CIFSSEC_MAY_NTLM))
+			return false;
+		break;
+	case Kerberos:
+		if (!(secFlags & CIFSSEC_MAY_KRB5))
+			return false;
+		break;
+	case RawNTLMSSP:
+		if (!(secFlags & CIFSSEC_MAY_NTLMSSP))
+			return false;
+		break;
+	default:
+		/* shouldn't happen */
+		return false;
+	}
+
+	/* now check if signing mode is acceptible */
+	if ((secFlags & CIFSSEC_MAY_SIGN) == 0 &&
+	    (server->secMode & SECMODE_SIGN_REQUIRED))
+			return false;
+	else if (((secFlags & CIFSSEC_MUST_SIGN) == CIFSSEC_MUST_SIGN) &&
+		 (server->secMode &
+		  (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED)) == 0)
+			return false;
+
+	return true;
+}
+
+static struct TCP_Server_Info *
+cifs_find_tcp_session(struct sockaddr *addr, struct smb_vol *vol)
+{
 	struct TCP_Server_Info *server;
-	struct sockaddr_in *addr4 = (struct sockaddr_in *) addr;
-	struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr;
 
 	write_lock(&cifs_tcp_ses_lock);
-	list_for_each(tmp, &cifs_tcp_ses_list) {
-		server = list_entry(tmp, struct TCP_Server_Info,
-				    tcp_ses_list);
+	list_for_each_entry(server, &cifs_tcp_ses_list, tcp_ses_list) {
 		/*
 		 * the demux thread can exit on its own while still in CifsNew
 		 * so don't accept any sockets in that state. Since the
@@ -1401,37 +1487,11 @@
 		if (server->tcpStatus == CifsNew)
 			continue;
 
-		switch (addr->ss_family) {
-		case AF_INET:
-			if (addr4->sin_addr.s_addr ==
-			    server->addr.sockAddr.sin_addr.s_addr) {
-				addr4->sin_port = htons(port);
-				/* user overrode default port? */
-				if (addr4->sin_port) {
-					if (addr4->sin_port !=
-					    server->addr.sockAddr.sin_port)
-						continue;
-				}
-				break;
-			} else
-				continue;
+		if (!match_address(server, addr))
+			continue;
 
-		case AF_INET6:
-			if (ipv6_addr_equal(&addr6->sin6_addr,
-			    &server->addr.sockAddr6.sin6_addr) &&
-			    (addr6->sin6_scope_id ==
-			    server->addr.sockAddr6.sin6_scope_id)) {
-				addr6->sin6_port = htons(port);
-				/* user overrode default port? */
-				if (addr6->sin6_port) {
-					if (addr6->sin6_port !=
-					   server->addr.sockAddr6.sin6_port)
-						continue;
-				}
-				break;
-			} else
-				continue;
-		}
+		if (!match_security(server, vol))
+			continue;
 
 		++server->srv_count;
 		write_unlock(&cifs_tcp_ses_lock);
@@ -1460,6 +1520,8 @@
 	server->tcpStatus = CifsExiting;
 	spin_unlock(&GlobalMid_Lock);
 
+	cifs_fscache_release_client_cookie(server);
+
 	task = xchg(&server->tsk, NULL);
 	if (task)
 		force_sig(SIGKILL, task);
@@ -1479,7 +1541,9 @@
 	cFYI(1, "UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip);
 
 	if (volume_info->UNCip && volume_info->UNC) {
-		rc = cifs_convert_address(volume_info->UNCip, &addr);
+		rc = cifs_fill_sockaddr((struct sockaddr *)&addr,
+					volume_info->UNCip,
+					volume_info->port);
 		if (!rc) {
 			/* we failed translating address */
 			rc = -EINVAL;
@@ -1499,7 +1563,7 @@
 	}
 
 	/* see if we already have a matching tcp_ses */
-	tcp_ses = cifs_find_tcp_session(&addr, volume_info->port);
+	tcp_ses = cifs_find_tcp_session((struct sockaddr *)&addr, volume_info);
 	if (tcp_ses)
 		return tcp_ses;
 
@@ -1543,12 +1607,10 @@
 		cFYI(1, "attempting ipv6 connect");
 		/* BB should we allow ipv6 on port 139? */
 		/* other OS never observed in Wild doing 139 with v6 */
-		sin_server6->sin6_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
 			sizeof(struct sockaddr_in6));
 		rc = ipv6_connect(tcp_ses);
 	} else {
-		sin_server->sin_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr, sin_server,
 			sizeof(struct sockaddr_in));
 		rc = ipv4_connect(tcp_ses);
@@ -1577,6 +1639,8 @@
 	list_add(&tcp_ses->tcp_ses_list, &cifs_tcp_ses_list);
 	write_unlock(&cifs_tcp_ses_lock);
 
+	cifs_fscache_get_client_cookie(tcp_ses);
+
 	return tcp_ses;
 
 out_err:
@@ -1591,17 +1655,27 @@
 }
 
 static struct cifsSesInfo *
-cifs_find_smb_ses(struct TCP_Server_Info *server, char *username)
+cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol)
 {
-	struct list_head *tmp;
 	struct cifsSesInfo *ses;
 
 	write_lock(&cifs_tcp_ses_lock);
-	list_for_each(tmp, &server->smb_ses_list) {
-		ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list);
-		if (strncmp(ses->userName, username, MAX_USERNAME_SIZE))
-			continue;
-
+	list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) {
+		switch (server->secType) {
+		case Kerberos:
+			if (vol->cred_uid != ses->cred_uid)
+				continue;
+			break;
+		default:
+			/* anything else takes username/password */
+			if (strncmp(ses->userName, vol->username,
+				    MAX_USERNAME_SIZE))
+				continue;
+			if (strlen(vol->username) != 0 &&
+			    strncmp(ses->password, vol->password,
+				    MAX_PASSWORD_SIZE))
+				continue;
+		}
 		++ses->ses_count;
 		write_unlock(&cifs_tcp_ses_lock);
 		return ses;
@@ -1643,7 +1717,7 @@
 
 	xid = GetXid();
 
-	ses = cifs_find_smb_ses(server, volume_info->username);
+	ses = cifs_find_smb_ses(server, volume_info);
 	if (ses) {
 		cFYI(1, "Existing smb sess found (status=%d)", ses->status);
 
@@ -1706,6 +1780,7 @@
 		if (ses->domainName)
 			strcpy(ses->domainName, volume_info->domainname);
 	}
+	ses->cred_uid = volume_info->cred_uid;
 	ses->linux_uid = volume_info->linux_uid;
 	ses->overrideSecFlg = volume_info->secFlg;
 
@@ -1773,6 +1848,7 @@
 	CIFSSMBTDis(xid, tcon);
 	_FreeXid(xid);
 
+	cifs_fscache_release_super_cookie(tcon);
 	tconInfoFree(tcon);
 	cifs_put_smb_ses(ses);
 }
@@ -1843,6 +1919,8 @@
 	list_add(&tcon->tcon_list, &ses->tcon_list);
 	write_unlock(&cifs_tcp_ses_lock);
 
+	cifs_fscache_get_super_cookie(tcon);
+
 	return tcon;
 
 out_fail:
@@ -2397,6 +2475,8 @@
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
 	if (pvolume_info->dynperm)
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
+	if (pvolume_info->fsc)
+		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_FSCACHE;
 	if (pvolume_info->direct_io) {
 		cFYI(1, "mounting share using direct i/o");
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 391816b..a7de5e9 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
+#include <linux/file.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -129,12 +130,6 @@
 	return full_path;
 }
 
-/*
- * When called with struct file pointer set to NULL, there is no way we could
- * update file->private_data, but getting it stuck on openFileList provides a
- * way to access it from cifs_fill_filedata and thereby set file->private_data
- * from cifs_open.
- */
 struct cifsFileInfo *
 cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 		  struct file *file, struct vfsmount *mnt, unsigned int oflags)
@@ -184,12 +179,13 @@
 	}
 	write_unlock(&GlobalSMBSeslock);
 
+	file->private_data = pCifsFile;
+
 	return pCifsFile;
 }
 
 int cifs_posix_open(char *full_path, struct inode **pinode,
-			struct vfsmount *mnt, struct super_block *sb,
-			int mode, int oflags,
+			struct super_block *sb, int mode, int oflags,
 			__u32 *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
@@ -258,19 +254,6 @@
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	/*
-	 * cifs_fill_filedata() takes care of setting cifsFileInfo pointer to
-	 * file->private_data.
-	 */
-	if (mnt) {
-		struct cifsFileInfo *pfile_info;
-
-		pfile_info = cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt,
-					       oflags);
-		if (pfile_info == NULL)
-			rc = -ENOMEM;
-	}
-
 posix_open_ret:
 	kfree(presp_data);
 	return rc;
@@ -298,7 +281,6 @@
 	int create_options = CREATE_NOT_DIR;
 	__u32 oplock = 0;
 	int oflags;
-	bool posix_create = false;
 	/*
 	 * BB below access is probably too much for mknod to request
 	 *    but we have to do query and setpathinfo so requesting
@@ -339,7 +321,6 @@
 	    (CIFS_UNIX_POSIX_PATH_OPS_CAP &
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		rc = cifs_posix_open(full_path, &newinode,
-			nd ? nd->path.mnt : NULL,
 			inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
@@ -347,7 +328,6 @@
 		   handled in posix open */
 
 		if (rc == 0) {
-			posix_create = true;
 			if (newinode == NULL) /* query inode info */
 				goto cifs_create_get_file_info;
 			else /* success, no need to query */
@@ -478,21 +458,28 @@
 	else
 		cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
 
-	/* nfsd case - nfs srv does not set nd */
-	if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
-		/* mknod case - do not leave file open */
-		CIFSSMBClose(xid, tcon, fileHandle);
-	} else if (!(posix_create) && (newinode)) {
+	if (newinode && nd && (nd->flags & LOOKUP_OPEN)) {
 		struct cifsFileInfo *pfile_info;
-		/*
-		 * cifs_fill_filedata() takes care of setting cifsFileInfo
-		 * pointer to file->private_data.
-		 */
-		pfile_info = cifs_new_fileinfo(newinode, fileHandle, NULL,
+		struct file *filp;
+
+		filp = lookup_instantiate_filp(nd, direntry, generic_file_open);
+		if (IS_ERR(filp)) {
+			rc = PTR_ERR(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
+			goto cifs_create_out;
+		}
+
+		pfile_info = cifs_new_fileinfo(newinode, fileHandle, filp,
 					       nd->path.mnt, oflags);
-		if (pfile_info == NULL)
+		if (pfile_info == NULL) {
+			fput(filp);
+			CIFSSMBClose(xid, tcon, fileHandle);
 			rc = -ENOMEM;
+		}
+	} else {
+		CIFSSMBClose(xid, tcon, fileHandle);
 	}
+
 cifs_create_out:
 	kfree(buf);
 	kfree(full_path);
@@ -636,6 +623,7 @@
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
+	struct cifsFileInfo *cfile;
 	struct inode *newInode = NULL;
 	char *full_path = NULL;
 	struct file *filp;
@@ -703,7 +691,7 @@
 		if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
-			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
+			rc = cifs_posix_open(full_path, &newInode,
 					parent_dir_inode->i_sb,
 					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
@@ -733,8 +721,25 @@
 		else
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
-		if (posix_open)
-			filp = lookup_instantiate_filp(nd, direntry, NULL);
+		if (posix_open) {
+			filp = lookup_instantiate_filp(nd, direntry,
+						       generic_file_open);
+			if (IS_ERR(filp)) {
+				rc = PTR_ERR(filp);
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				goto lookup_out;
+			}
+
+			cfile = cifs_new_fileinfo(newInode, fileHandle, filp,
+						  nd->path.mnt,
+						  nd->intent.open.flags);
+			if (cfile == NULL) {
+				fput(filp);
+				CIFSSMBClose(xid, pTcon, fileHandle);
+				rc = -ENOMEM;
+				goto lookup_out;
+			}
+		}
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
 		renew_parental_timestamps(direntry);
@@ -755,6 +760,7 @@
 		is a common return code */
 	}
 
+lookup_out:
 	kfree(full_path);
 	FreeXid(xid);
 	return ERR_PTR(rc);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 4db2c5e..3ad7f43 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -24,12 +24,16 @@
  */
 
 #include <linux/slab.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
 #include <keys/user-type.h>
 #include "dns_resolve.h"
 #include "cifsglob.h"
 #include "cifsproto.h"
 #include "cifs_debug.h"
 
+static const struct cred *dns_resolver_cache;
+
 /* Checks if supplied name is IP address
  * returns:
  * 		1 - name is IP
@@ -40,7 +44,7 @@
 {
 	struct sockaddr_storage ss;
 
-	return cifs_convert_address(name, &ss);
+	return cifs_convert_address((struct sockaddr *)&ss, name);
 }
 
 static int
@@ -94,6 +98,7 @@
 int
 dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
 {
+	const struct cred *saved_cred;
 	int rc = -EAGAIN;
 	struct key *rkey = ERR_PTR(-EAGAIN);
 	char *name;
@@ -133,8 +138,15 @@
 		goto skip_upcall;
 	}
 
+	saved_cred = override_creds(dns_resolver_cache);
 	rkey = request_key(&key_type_dns_resolver, name, "");
+	revert_creds(saved_cred);
 	if (!IS_ERR(rkey)) {
+		if (!(rkey->perm & KEY_USR_VIEW)) {
+			down_read(&rkey->sem);
+			rkey->perm |= KEY_USR_VIEW;
+			up_read(&rkey->sem);
+		}
 		len = rkey->type_data.x[0];
 		data = rkey->payload.data;
 	} else {
@@ -165,4 +177,61 @@
 	return rc;
 }
 
+int __init cifs_init_dns_resolver(void)
+{
+	struct cred *cred;
+	struct key *keyring;
+	int ret;
 
+	printk(KERN_NOTICE "Registering the %s key type\n",
+	       key_type_dns_resolver.name);
+
+	/* create an override credential set with a special thread keyring in
+	 * which DNS requests are cached
+	 *
+	 * this is used to prevent malicious redirections from being installed
+	 * with add_key().
+	 */
+	cred = prepare_kernel_cred(NULL);
+	if (!cred)
+		return -ENOMEM;
+
+	keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+			    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+			    KEY_USR_VIEW | KEY_USR_READ,
+			    KEY_ALLOC_NOT_IN_QUOTA);
+	if (IS_ERR(keyring)) {
+		ret = PTR_ERR(keyring);
+		goto failed_put_cred;
+	}
+
+	ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+	if (ret < 0)
+		goto failed_put_key;
+
+	ret = register_key_type(&key_type_dns_resolver);
+	if (ret < 0)
+		goto failed_put_key;
+
+	/* instruct request_key() to use this special keyring as a cache for
+	 * the results it looks up */
+	cred->thread_keyring = keyring;
+	cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+	dns_resolver_cache = cred;
+	return 0;
+
+failed_put_key:
+	key_put(keyring);
+failed_put_cred:
+	put_cred(cred);
+	return ret;
+}
+
+void cifs_exit_dns_resolver(void)
+{
+	key_revoke(dns_resolver_cache->thread_keyring);
+	unregister_key_type(&key_type_dns_resolver);
+	put_cred(dns_resolver_cache);
+	printk(KERN_NOTICE "Unregistered %s key type\n",
+	       key_type_dns_resolver.name);
+}
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 966e928..5d7f291 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,8 @@
 #define _DNS_RESOLVE_H
 
 #ifdef __KERNEL__
-#include <linux/key-type.h>
-extern struct key_type key_type_dns_resolver;
+extern int __init cifs_init_dns_resolver(void);
+extern void cifs_exit_dns_resolver(void);
 extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
 #endif /* KERNEL */
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 75541af..fa04a00d 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -40,6 +40,7 @@
 #include "cifs_unicode.h"
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
+#include "fscache.h"
 
 static inline int cifs_convert_flags(unsigned int flags)
 {
@@ -162,44 +163,12 @@
 	return 0;
 }
 
-static struct cifsFileInfo *
-cifs_fill_filedata(struct file *file)
-{
-	struct list_head *tmp;
-	struct cifsFileInfo *pCifsFile = NULL;
-	struct cifsInodeInfo *pCifsInode = NULL;
-
-	/* search inode for this file and fill in file->private_data */
-	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	read_lock(&GlobalSMBSeslock);
-	list_for_each(tmp, &pCifsInode->openFileList) {
-		pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
-		if ((pCifsFile->pfile == NULL) &&
-		    (pCifsFile->pid == current->tgid)) {
-			/* mode set in cifs_create */
-
-			/* needed for writepage */
-			pCifsFile->pfile = file;
-			file->private_data = pCifsFile;
-			break;
-		}
-	}
-	read_unlock(&GlobalSMBSeslock);
-
-	if (file->private_data != NULL) {
-		return pCifsFile;
-	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
-			cERROR(1, "could not find file instance for "
-				   "new file %p", file);
-	return NULL;
-}
-
 /* all arguments to this function must be checked for validity in caller */
-static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
-	struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
+static inline int cifs_open_inode_helper(struct inode *inode,
 	struct cifsTconInfo *pTcon, int *oplock, FILE_ALL_INFO *buf,
 	char *full_path, int xid)
 {
+	struct cifsInodeInfo *pCifsInode = CIFS_I(inode);
 	struct timespec temp;
 	int rc;
 
@@ -213,36 +182,35 @@
 	/* if not oplocked, invalidate inode pages if mtime or file
 	   size changed */
 	temp = cifs_NTtimeToUnix(buf->LastWriteTime);
-	if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
-			   (file->f_path.dentry->d_inode->i_size ==
+	if (timespec_equal(&inode->i_mtime, &temp) &&
+			   (inode->i_size ==
 			    (loff_t)le64_to_cpu(buf->EndOfFile))) {
 		cFYI(1, "inode unchanged on server");
 	} else {
-		if (file->f_path.dentry->d_inode->i_mapping) {
+		if (inode->i_mapping) {
 			/* BB no need to lock inode until after invalidate
 			since namei code should already have it locked? */
-			rc = filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
+			rc = filemap_write_and_wait(inode->i_mapping);
 			if (rc != 0)
-				CIFS_I(file->f_path.dentry->d_inode)->write_behind_rc = rc;
+				pCifsInode->write_behind_rc = rc;
 		}
 		cFYI(1, "invalidating remote inode since open detected it "
 			 "changed");
-		invalidate_remote_inode(file->f_path.dentry->d_inode);
+		invalidate_remote_inode(inode);
 	}
 
 client_can_cache:
 	if (pTcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&file->f_path.dentry->d_inode,
-			full_path, inode->i_sb, xid);
+		rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
+					      xid);
 	else
-		rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
-			full_path, buf, inode->i_sb, xid, NULL);
+		rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
+					 xid, NULL);
 
 	if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 		pCifsInode->clientCanCacheAll = true;
 		pCifsInode->clientCanCacheRead = true;
-		cFYI(1, "Exclusive Oplock granted on inode %p",
-			 file->f_path.dentry->d_inode);
+		cFYI(1, "Exclusive Oplock granted on inode %p", inode);
 	} else if ((*oplock & 0xF) == OPLOCK_READ)
 		pCifsInode->clientCanCacheRead = true;
 
@@ -256,7 +224,7 @@
 	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *pCifsFile;
+	struct cifsFileInfo *pCifsFile = NULL;
 	struct cifsInodeInfo *pCifsInode;
 	char *full_path = NULL;
 	int desiredAccess;
@@ -270,12 +238,6 @@
 	tcon = cifs_sb->tcon;
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	pCifsFile = cifs_fill_filedata(file);
-	if (pCifsFile) {
-		rc = 0;
-		FreeXid(xid);
-		return rc;
-	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -299,8 +261,7 @@
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		oflags |= SMB_O_CREAT;
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, &inode, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -308,9 +269,23 @@
 			/* no need for special case handling of setting mode
 			   on read only files needed here */
 
-			pCifsFile = cifs_fill_filedata(file);
-			cifs_posix_open_inode_helper(inode, file, pCifsInode,
-						     oplock, netfid);
+			rc = cifs_posix_open_inode_helper(inode, file,
+					pCifsInode, oplock, netfid);
+			if (rc != 0) {
+				CIFSSMBClose(xid, tcon, netfid);
+				goto out;
+			}
+
+			pCifsFile = cifs_new_fileinfo(inode, netfid, file,
+							file->f_path.mnt,
+							oflags);
+			if (pCifsFile == NULL) {
+				CIFSSMBClose(xid, tcon, netfid);
+				rc = -ENOMEM;
+			}
+
+			cifs_fscache_set_inode_cookie(inode, file);
+
 			goto out;
 		} else if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
 			if (tcon->ses->serverNOS)
@@ -391,16 +366,18 @@
 		goto out;
 	}
 
+	rc = cifs_open_inode_helper(inode, tcon, &oplock, buf, full_path, xid);
+	if (rc != 0)
+		goto out;
+
 	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
 					file->f_flags);
-	file->private_data = pCifsFile;
-	if (file->private_data == NULL) {
+	if (pCifsFile == NULL) {
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
-				    &oplock, buf, full_path, xid);
+	cifs_fscache_set_inode_cookie(inode, file);
 
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
@@ -456,7 +433,7 @@
 	__u16 netfid;
 
 	if (file->private_data)
-		pCifsFile = (struct cifsFileInfo *)file->private_data;
+		pCifsFile = file->private_data;
 	else
 		return -EBADF;
 
@@ -513,8 +490,7 @@
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
-				inode->i_sb,
+		rc = cifs_posix_open(full_path, NULL, inode->i_sb,
 				cifs_sb->mnt_file_mode /* ignored */,
 				oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -595,8 +571,7 @@
 	int xid, timeout;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
-	struct cifsFileInfo *pSMBFile =
-		(struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *pSMBFile = file->private_data;
 
 	xid = GetXid();
 
@@ -671,8 +646,7 @@
 {
 	int rc = 0;
 	int xid;
-	struct cifsFileInfo *pCFileStruct =
-	    (struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *pCFileStruct = file->private_data;
 	char *ptmp;
 
 	cFYI(1, "Closedir inode = 0x%p", inode);
@@ -893,8 +867,7 @@
 				      length, pfLock,
 				      posix_lock_type, wait_flag);
 	} else {
-		struct cifsFileInfo *fid =
-			(struct cifsFileInfo *)file->private_data;
+		struct cifsFileInfo *fid = file->private_data;
 
 		if (numLock) {
 			rc = CIFSSMBLock(xid, tcon, netfid, length,
@@ -995,7 +968,7 @@
 
 	if (file->private_data == NULL)
 		return -EBADF;
-	open_file = (struct cifsFileInfo *) file->private_data;
+	open_file = file->private_data;
 
 	rc = generic_write_checks(file, poffset, &write_size, 0);
 	if (rc)
@@ -1097,7 +1070,7 @@
 
 	if (file->private_data == NULL)
 		return -EBADF;
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	xid = GetXid();
 
@@ -1681,8 +1654,7 @@
 	int xid;
 	int rc = 0;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *smbfile =
-		(struct cifsFileInfo *)file->private_data;
+	struct cifsFileInfo *smbfile = file->private_data;
 	struct inode *inode = file->f_path.dentry->d_inode;
 
 	xid = GetXid();
@@ -1786,7 +1758,7 @@
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	if ((file->f_flags & O_ACCMODE) == O_WRONLY)
 		cFYI(1, "attempting read on write only file instance");
@@ -1867,7 +1839,7 @@
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 
 	if ((file->f_flags & O_ACCMODE) == O_WRONLY)
 		cFYI(1, "attempting read on write only file instance");
@@ -1972,6 +1944,9 @@
 		SetPageUptodate(page);
 		unlock_page(page);
 		data += PAGE_CACHE_SIZE;
+
+		/* add page to FS-Cache */
+		cifs_readpage_to_fscache(mapping->host, page);
 	}
 	return;
 }
@@ -1998,10 +1973,19 @@
 		FreeXid(xid);
 		return rc;
 	}
-	open_file = (struct cifsFileInfo *)file->private_data;
+	open_file = file->private_data;
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 	pTcon = cifs_sb->tcon;
 
+	/*
+	 * Reads as many pages as possible from fscache. Returns -ENOBUFS
+	 * immediately if the cookie is negative
+	 */
+	rc = cifs_readpages_from_fscache(mapping->host, mapping, page_list,
+					 &num_pages);
+	if (rc == 0)
+		goto read_complete;
+
 	cFYI(DBG2, "rpages: num pages %d", num_pages);
 	for (i = 0; i < num_pages; ) {
 		unsigned contig_pages;
@@ -2112,6 +2096,7 @@
 		smb_read_data = NULL;
 	}
 
+read_complete:
 	FreeXid(xid);
 	return rc;
 }
@@ -2122,6 +2107,11 @@
 	char *read_data;
 	int rc;
 
+	/* Is the page cached? */
+	rc = cifs_readpage_from_fscache(file->f_path.dentry->d_inode, page);
+	if (rc == 0)
+		goto read_complete;
+
 	page_cache_get(page);
 	read_data = kmap(page);
 	/* for reads over a certain size could initiate async read ahead */
@@ -2141,11 +2131,17 @@
 
 	flush_dcache_page(page);
 	SetPageUptodate(page);
+
+	/* send this page to the cache */
+	cifs_readpage_to_fscache(file->f_path.dentry->d_inode, page);
+
 	rc = 0;
 
 io_error:
 	kunmap(page);
 	page_cache_release(page);
+
+read_complete:
 	return rc;
 }
 
@@ -2295,6 +2291,22 @@
 	return rc;
 }
 
+static int cifs_release_page(struct page *page, gfp_t gfp)
+{
+	if (PagePrivate(page))
+		return 0;
+
+	return cifs_fscache_release_page(page, gfp);
+}
+
+static void cifs_invalidate_page(struct page *page, unsigned long offset)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(page->mapping->host);
+
+	if (offset == 0)
+		cifs_fscache_invalidate_page(page, &cifsi->vfs_inode);
+}
+
 static void
 cifs_oplock_break(struct slow_work *work)
 {
@@ -2368,6 +2380,8 @@
 	.write_begin = cifs_write_begin,
 	.write_end = cifs_write_end,
 	.set_page_dirty = __set_page_dirty_nobuffers,
+	.releasepage = cifs_release_page,
+	.invalidatepage = cifs_invalidate_page,
 	/* .sync_page = cifs_sync_page, */
 	/* .direct_IO = */
 };
@@ -2384,6 +2398,8 @@
 	.write_begin = cifs_write_begin,
 	.write_end = cifs_write_end,
 	.set_page_dirty = __set_page_dirty_nobuffers,
+	.releasepage = cifs_release_page,
+	.invalidatepage = cifs_invalidate_page,
 	/* .sync_page = cifs_sync_page, */
 	/* .direct_IO = */
 };
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
new file mode 100644
index 0000000..9f3f5c4
--- /dev/null
+++ b/fs/cifs/fscache.c
@@ -0,0 +1,236 @@
+/*
+ *   fs/cifs/fscache.c - CIFS filesystem cache interface
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include "fscache.h"
+#include "cifsglob.h"
+#include "cifs_debug.h"
+#include "cifs_fs_sb.h"
+
+void cifs_fscache_get_client_cookie(struct TCP_Server_Info *server)
+{
+	server->fscache =
+		fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
+				&cifs_fscache_server_index_def, server);
+	cFYI(1, "CIFS: get client cookie (0x%p/0x%p)", server,
+				server->fscache);
+}
+
+void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server)
+{
+	cFYI(1, "CIFS: release client cookie (0x%p/0x%p)", server,
+				server->fscache);
+	fscache_relinquish_cookie(server->fscache, 0);
+	server->fscache = NULL;
+}
+
+void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon)
+{
+	struct TCP_Server_Info *server = tcon->ses->server;
+
+	tcon->fscache =
+		fscache_acquire_cookie(server->fscache,
+				&cifs_fscache_super_index_def, tcon);
+	cFYI(1, "CIFS: get superblock cookie (0x%p/0x%p)",
+				server->fscache, tcon->fscache);
+}
+
+void cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon)
+{
+	cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache);
+	fscache_relinquish_cookie(tcon->fscache, 0);
+	tcon->fscache = NULL;
+}
+
+static void cifs_fscache_enable_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+	if (cifsi->fscache)
+		return;
+
+	cifsi->fscache = fscache_acquire_cookie(cifs_sb->tcon->fscache,
+				&cifs_fscache_inode_object_def,
+				cifsi);
+	cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)",
+			cifs_sb->tcon->fscache, cifsi->fscache);
+}
+
+void cifs_fscache_release_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+	if (cifsi->fscache) {
+		cFYI(1, "CIFS releasing inode cookie (0x%p)",
+				cifsi->fscache);
+		fscache_relinquish_cookie(cifsi->fscache, 0);
+		cifsi->fscache = NULL;
+	}
+}
+
+static void cifs_fscache_disable_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+	if (cifsi->fscache) {
+		cFYI(1, "CIFS disabling inode cookie (0x%p)",
+				cifsi->fscache);
+		fscache_relinquish_cookie(cifsi->fscache, 1);
+		cifsi->fscache = NULL;
+	}
+}
+
+void cifs_fscache_set_inode_cookie(struct inode *inode, struct file *filp)
+{
+	if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+		cifs_fscache_disable_inode_cookie(inode);
+	else {
+		cifs_fscache_enable_inode_cookie(inode);
+		cFYI(1, "CIFS: fscache inode cookie set");
+	}
+}
+
+void cifs_fscache_reset_inode_cookie(struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct fscache_cookie *old = cifsi->fscache;
+
+	if (cifsi->fscache) {
+		/* retire the current fscache cache and get a new one */
+		fscache_relinquish_cookie(cifsi->fscache, 1);
+
+		cifsi->fscache = fscache_acquire_cookie(cifs_sb->tcon->fscache,
+					&cifs_fscache_inode_object_def,
+					cifsi);
+		cFYI(1, "CIFS: new cookie 0x%p oldcookie 0x%p",
+				cifsi->fscache, old);
+	}
+}
+
+int cifs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+	if (PageFsCache(page)) {
+		struct inode *inode = page->mapping->host;
+		struct cifsInodeInfo *cifsi = CIFS_I(inode);
+
+		cFYI(1, "CIFS: fscache release page (0x%p/0x%p)",
+				page, cifsi->fscache);
+		if (!fscache_maybe_release_page(cifsi->fscache, page, gfp))
+			return 0;
+	}
+
+	return 1;
+}
+
+static void cifs_readpage_from_fscache_complete(struct page *page, void *ctx,
+						int error)
+{
+	cFYI(1, "CFS: readpage_from_fscache_complete (0x%p/%d)",
+			page, error);
+	if (!error)
+		SetPageUptodate(page);
+	unlock_page(page);
+}
+
+/*
+ * Retrieve a page from FS-Cache
+ */
+int __cifs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+	int ret;
+
+	cFYI(1, "CIFS: readpage_from_fscache(fsc:%p, p:%p, i:0x%p",
+			CIFS_I(inode)->fscache, page, inode);
+	ret = fscache_read_or_alloc_page(CIFS_I(inode)->fscache, page,
+					 cifs_readpage_from_fscache_complete,
+					 NULL,
+					 GFP_KERNEL);
+	switch (ret) {
+
+	case 0: /* page found in fscache, read submitted */
+		cFYI(1, "CIFS: readpage_from_fscache: submitted");
+		return ret;
+	case -ENOBUFS:	/* page won't be cached */
+	case -ENODATA:	/* page not in cache */
+		cFYI(1, "CIFS: readpage_from_fscache %d", ret);
+		return 1;
+
+	default:
+		cERROR(1, "unknown error ret = %d", ret);
+	}
+	return ret;
+}
+
+/*
+ * Retrieve a set of pages from FS-Cache
+ */
+int __cifs_readpages_from_fscache(struct inode *inode,
+				struct address_space *mapping,
+				struct list_head *pages,
+				unsigned *nr_pages)
+{
+	int ret;
+
+	cFYI(1, "CIFS: __cifs_readpages_from_fscache (0x%p/%u/0x%p)",
+			CIFS_I(inode)->fscache, *nr_pages, inode);
+	ret = fscache_read_or_alloc_pages(CIFS_I(inode)->fscache, mapping,
+					  pages, nr_pages,
+					  cifs_readpage_from_fscache_complete,
+					  NULL,
+					  mapping_gfp_mask(mapping));
+	switch (ret) {
+	case 0:	/* read submitted to the cache for all pages */
+		cFYI(1, "CIFS: readpages_from_fscache: submitted");
+		return ret;
+
+	case -ENOBUFS:	/* some pages are not cached and can't be */
+	case -ENODATA:	/* some pages are not cached */
+		cFYI(1, "CIFS: readpages_from_fscache: no page");
+		return 1;
+
+	default:
+		cFYI(1, "unknown error ret = %d", ret);
+	}
+
+	return ret;
+}
+
+void __cifs_readpage_to_fscache(struct inode *inode, struct page *page)
+{
+	int ret;
+
+	cFYI(1, "CIFS: readpage_to_fscache(fsc: %p, p: %p, i: %p",
+			CIFS_I(inode)->fscache, page, inode);
+	ret = fscache_write_page(CIFS_I(inode)->fscache, page, GFP_KERNEL);
+	if (ret != 0)
+		fscache_uncache_page(CIFS_I(inode)->fscache, page);
+}
+
+void __cifs_fscache_invalidate_page(struct page *page, struct inode *inode)
+{
+	struct cifsInodeInfo *cifsi = CIFS_I(inode);
+	struct fscache_cookie *cookie = cifsi->fscache;
+
+	cFYI(1, "CIFS: fscache invalidatepage (0x%p/0x%p)", page, cookie);
+	fscache_wait_on_page_write(cookie, page);
+	fscache_uncache_page(cookie, page);
+}
+
diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h
new file mode 100644
index 0000000..31b88ec2
--- /dev/null
+++ b/fs/cifs/fscache.h
@@ -0,0 +1,136 @@
+/*
+ *   fs/cifs/fscache.h - CIFS filesystem cache interface definitions
+ *
+ *   Copyright (c) 2010 Novell, Inc.
+ *   Authors(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _CIFS_FSCACHE_H
+#define _CIFS_FSCACHE_H
+
+#include <linux/fscache.h>
+
+#include "cifsglob.h"
+
+#ifdef CONFIG_CIFS_FSCACHE
+
+extern struct fscache_netfs cifs_fscache_netfs;
+extern const struct fscache_cookie_def cifs_fscache_server_index_def;
+extern const struct fscache_cookie_def cifs_fscache_super_index_def;
+extern const struct fscache_cookie_def cifs_fscache_inode_object_def;
+
+extern int cifs_fscache_register(void);
+extern void cifs_fscache_unregister(void);
+
+/*
+ * fscache.c
+ */
+extern void cifs_fscache_get_client_cookie(struct TCP_Server_Info *);
+extern void cifs_fscache_release_client_cookie(struct TCP_Server_Info *);
+extern void cifs_fscache_get_super_cookie(struct cifsTconInfo *);
+extern void cifs_fscache_release_super_cookie(struct cifsTconInfo *);
+
+extern void cifs_fscache_release_inode_cookie(struct inode *);
+extern void cifs_fscache_set_inode_cookie(struct inode *, struct file *);
+extern void cifs_fscache_reset_inode_cookie(struct inode *);
+
+extern void __cifs_fscache_invalidate_page(struct page *, struct inode *);
+extern int cifs_fscache_release_page(struct page *page, gfp_t gfp);
+extern int __cifs_readpage_from_fscache(struct inode *, struct page *);
+extern int __cifs_readpages_from_fscache(struct inode *,
+					 struct address_space *,
+					 struct list_head *,
+					 unsigned *);
+
+extern void __cifs_readpage_to_fscache(struct inode *, struct page *);
+
+static inline void cifs_fscache_invalidate_page(struct page *page,
+					       struct inode *inode)
+{
+	if (PageFsCache(page))
+		__cifs_fscache_invalidate_page(page, inode);
+}
+
+static inline int cifs_readpage_from_fscache(struct inode *inode,
+					     struct page *page)
+{
+	if (CIFS_I(inode)->fscache)
+		return __cifs_readpage_from_fscache(inode, page);
+
+	return -ENOBUFS;
+}
+
+static inline int cifs_readpages_from_fscache(struct inode *inode,
+					      struct address_space *mapping,
+					      struct list_head *pages,
+					      unsigned *nr_pages)
+{
+	if (CIFS_I(inode)->fscache)
+		return __cifs_readpages_from_fscache(inode, mapping, pages,
+						     nr_pages);
+	return -ENOBUFS;
+}
+
+static inline void cifs_readpage_to_fscache(struct inode *inode,
+					    struct page *page)
+{
+	if (PageFsCache(page))
+		__cifs_readpage_to_fscache(inode, page);
+}
+
+#else /* CONFIG_CIFS_FSCACHE */
+static inline int cifs_fscache_register(void) { return 0; }
+static inline void cifs_fscache_unregister(void) {}
+
+static inline void
+cifs_fscache_get_client_cookie(struct TCP_Server_Info *server) {}
+static inline void
+cifs_fscache_release_client_cookie(struct TCP_Server_Info *server) {}
+static inline void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon) {}
+static inline void
+cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon) {}
+
+static inline void cifs_fscache_release_inode_cookie(struct inode *inode) {}
+static inline void cifs_fscache_set_inode_cookie(struct inode *inode,
+						 struct file *filp) {}
+static inline void cifs_fscache_reset_inode_cookie(struct inode *inode) {}
+static inline int cifs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+	return 1; /* May release page */
+}
+
+static inline void cifs_fscache_invalidate_page(struct page *page,
+			struct inode *inode) {}
+static inline int
+cifs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+	return -ENOBUFS;
+}
+
+static inline int cifs_readpages_from_fscache(struct inode *inode,
+					      struct address_space *mapping,
+					      struct list_head *pages,
+					      unsigned *nr_pages)
+{
+	return -ENOBUFS;
+}
+
+static inline void cifs_readpage_to_fscache(struct inode *inode,
+			struct page *page) {}
+
+#endif /* CONFIG_CIFS_FSCACHE */
+
+#endif /* _CIFS_FSCACHE_H */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 62b324f..a15b3a9 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -29,6 +29,7 @@
 #include "cifsproto.h"
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
+#include "fscache.h"
 
 
 static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral)
@@ -288,7 +289,7 @@
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
-	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+	struct cifsFileInfo *cfile = filp->private_data;
 
 	xid = GetXid();
 	rc = CIFSSMBUnixQFileInfo(xid, tcon, cfile->netfid, &find_data);
@@ -515,7 +516,7 @@
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
-	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
+	struct cifsFileInfo *cfile = filp->private_data;
 
 	xid = GetXid();
 	rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data);
@@ -723,9 +724,14 @@
 {
 	struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
 
+	/* don't match inode with different uniqueid */
 	if (CIFS_I(inode)->uniqueid != fattr->cf_uniqueid)
 		return 0;
 
+	/* don't match inode of different type */
+	if ((inode->i_mode & S_IFMT) != (fattr->cf_mode & S_IFMT))
+		return 0;
+
 	/*
 	 * uh oh -- it's a directory. We can't use it since hardlinked dirs are
 	 * verboten. Disable serverino and return it as if it were found, the
@@ -776,6 +782,10 @@
 			inode->i_flags |= S_NOATIME | S_NOCMTIME;
 		if (inode->i_state & I_NEW) {
 			inode->i_ino = hash;
+#ifdef CONFIG_CIFS_FSCACHE
+			/* initialize per-inode cache cookie pointer */
+			CIFS_I(inode)->fscache = NULL;
+#endif
 			unlock_new_inode(inode);
 		}
 	}
@@ -807,6 +817,11 @@
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
+#ifdef CONFIG_CIFS_FSCACHE
+	/* populate tcon->resource_id */
+	cifs_sb->tcon->resource_id = CIFS_I(inode)->uniqueid;
+#endif
+
 	if (rc && cifs_sb->tcon->ipc) {
 		cFYI(1, "ipc connection - fake read inode");
 		inode->i_mode |= S_IFDIR;
@@ -1401,6 +1416,10 @@
 	if (rc == 0 || rc != -ETXTBSY)
 		return rc;
 
+	/* open-file renames don't work across directories */
+	if (to_dentry->d_parent != from_dentry->d_parent)
+		return rc;
+
 	/* open the file to be renamed -- we need DELETE perms */
 	rc = CIFSSMBOpen(xid, pTcon, fromPath, FILE_OPEN, DELETE,
 			 CREATE_NOT_DIR, &srcfid, &oplock, NULL,
@@ -1564,6 +1583,7 @@
 			cifs_i->write_behind_rc = rc;
 	}
 	invalidate_remote_inode(inode);
+	cifs_fscache_reset_inode_cookie(inode);
 }
 
 int cifs_revalidate_file(struct file *filp)
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 505926f..9d38a71 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -41,8 +41,7 @@
 	__u64	ExtAttrMask = 0;
 	__u64   caps;
 	struct cifsTconInfo *tcon;
-	struct cifsFileInfo *pSMBFile =
-		(struct cifsFileInfo *)filep->private_data;
+	struct cifsFileInfo *pSMBFile = filep->private_data;
 #endif /* CONFIG_CIFS_POSIX */
 
 	xid = GetXid();
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index d35d528..c6721ee 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -61,6 +61,7 @@
 	{ERRremcd, -EACCES},
 	{ERRdiffdevice, -EXDEV},
 	{ERRnofiles, -ENOENT},
+	{ERRwriteprot, -EROFS},
 	{ERRbadshare, -ETXTBSY},
 	{ERRlock, -EACCES},
 	{ERRunsup, -EINVAL},
@@ -164,7 +165,7 @@
  * Returns 0 on failure.
  */
 int
-cifs_convert_address(char *src, void *dst)
+cifs_convert_address(struct sockaddr *dst, char *src)
 {
 	int rc;
 	char *pct, *endp;
@@ -201,6 +202,27 @@
 	return rc;
 }
 
+int
+cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+		   const unsigned short int port)
+{
+	if (!cifs_convert_address(dst, src))
+		return 0;
+
+	switch (dst->sa_family) {
+	case AF_INET:
+		((struct sockaddr_in *)dst)->sin_port = htons(port);
+		break;
+	case AF_INET6:
+		((struct sockaddr_in6 *)dst)->sin6_port = htons(port);
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
 /*****************************************************************************
 convert a NT status code to a dos class/code
  *****************************************************************************/
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index daf1753..d5e591f 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -847,6 +847,11 @@
 		end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
 
 		tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
+		if (tmp_buf == NULL) {
+			rc = -ENOMEM;
+			break;
+		}
+
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7707389..0a57cb7 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -730,15 +730,7 @@
 
 		/* calculate session key */
 		setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
-		if (first_time) /* should this be moved into common code
-				   with similar ntlmv2 path? */
-		/*   cifs_calculate_ntlmv2_mac_key(ses->server->mac_signing_key,
-				response BB FIXME, v2_sess_key); */
-
-		/* copy session key */
-
-	/*	memcpy(bcc_ptr, (char *)ntlm_session_key,LM2_SESS_KEY_SIZE);
-		bcc_ptr += LM2_SESS_KEY_SIZE; */
+		/* FIXME: calculate MAC key */
 		memcpy(bcc_ptr, (char *)v2_sess_key,
 		       sizeof(struct ntlmv2_resp));
 		bcc_ptr += sizeof(struct ntlmv2_resp);
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index c5084d2..7f16cb8 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -76,6 +76,7 @@
 #define ERRnofiles		18	/* A File Search command can find no
 					   more files matching the specified
 					   criteria. */
+#define ERRwriteprot		19	/* media is write protected */
 #define ERRgeneral		31
 #define ERRbadshare		32	/* The sharing mode specified for an
 					   Open conflicts with existing FIDs on
diff --git a/fs/compat.c b/fs/compat.c
index f0b391c..6490d21 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -626,7 +626,7 @@
 		tot_len += len;
 		if (tot_len < tmp) /* maths overflow on the compat_ssize_t */
 			goto out;
-		if (!access_ok(vrfy_dir(type), buf, len)) {
+		if (!access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
 			ret = -EFAULT;
 			goto out;
 		}
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 4164514..cf78d44 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -72,10 +72,6 @@
 	if (!sd)
 		return -EINVAL;
 
-	error = simple_setattr(dentry, iattr);
-	if (error)
-		return error;
-
 	sd_iattr = sd->s_iattr;
 	if (!sd_iattr) {
 		/* setting attributes for the first time, allocate now */
@@ -89,9 +85,12 @@
 		sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
 		sd->s_iattr = sd_iattr;
 	}
-
 	/* attributes were changed atleast once in past */
 
+	error = simple_setattr(dentry, iattr);
+	if (error)
+		return error;
+
 	if (ia_valid & ATTR_UID)
 		sd_iattr->ia_uid = iattr->ia_uid;
 	if (ia_valid & ATTR_GID)
diff --git a/fs/dcache.c b/fs/dcache.c
index d96047b..86d4db1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -590,6 +590,8 @@
 			up_read(&sb->s_umount);
 		}
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		count -= pruned;
 		__put_super(sb);
 		/* more work left to do? */
@@ -894,7 +896,7 @@
  *
  * In this case we return -1 to tell the caller that we baled.
  */
-static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		if (!(gfp_mask & __GFP_FS))
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 7600aac..a10cb91 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -218,7 +218,7 @@
  * filesystems can use it to hold additional state between get_block calls and
  * dio_complete.
  */
-static int dio_complete(struct dio *dio, loff_t offset, int ret)
+static int dio_complete(struct dio *dio, loff_t offset, int ret, bool is_async)
 {
 	ssize_t transferred = 0;
 
@@ -239,14 +239,6 @@
 			transferred = dio->i_size - offset;
 	}
 
-	if (dio->end_io && dio->result)
-		dio->end_io(dio->iocb, offset, transferred,
-			    dio->map_bh.b_private);
-
-	if (dio->flags & DIO_LOCKING)
-		/* lockdep: non-owner release */
-		up_read_non_owner(&dio->inode->i_alloc_sem);
-
 	if (ret == 0)
 		ret = dio->page_errors;
 	if (ret == 0)
@@ -254,6 +246,17 @@
 	if (ret == 0)
 		ret = transferred;
 
+	if (dio->end_io && dio->result) {
+		dio->end_io(dio->iocb, offset, transferred,
+			    dio->map_bh.b_private, ret, is_async);
+	} else if (is_async) {
+		aio_complete(dio->iocb, ret, 0);
+	}
+
+	if (dio->flags & DIO_LOCKING)
+		/* lockdep: non-owner release */
+		up_read_non_owner(&dio->inode->i_alloc_sem);
+
 	return ret;
 }
 
@@ -277,8 +280,7 @@
 	spin_unlock_irqrestore(&dio->bio_lock, flags);
 
 	if (remaining == 0) {
-		int ret = dio_complete(dio, dio->iocb->ki_pos, 0);
-		aio_complete(dio->iocb, ret, 0);
+		dio_complete(dio, dio->iocb->ki_pos, 0, true);
 		kfree(dio);
 	}
 }
@@ -1126,7 +1128,7 @@
 	spin_unlock_irqrestore(&dio->bio_lock, flags);
 
 	if (ret2 == 0) {
-		ret = dio_complete(dio, offset, ret);
+		ret = dio_complete(dio, offset, ret, false);
 		kfree(dio);
 	} else
 		BUG_ON(ret != -EIOCBQUEUED);
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 2d8dbce..46c4dd8 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -31,9 +31,9 @@
 
 static struct hlist_head *ecryptfs_daemon_hash;
 struct mutex ecryptfs_daemon_hash_mux;
-static int ecryptfs_hash_buckets;
+static int ecryptfs_hash_bits;
 #define ecryptfs_uid_hash(uid) \
-        hash_long((unsigned long)uid, ecryptfs_hash_buckets)
+        hash_long((unsigned long)uid, ecryptfs_hash_bits)
 
 static u32 ecryptfs_msg_counter;
 static struct ecryptfs_msg_ctx *ecryptfs_msg_ctx_arr;
@@ -486,18 +486,19 @@
 	}
 	mutex_init(&ecryptfs_daemon_hash_mux);
 	mutex_lock(&ecryptfs_daemon_hash_mux);
-	ecryptfs_hash_buckets = 1;
-	while (ecryptfs_number_of_users >> ecryptfs_hash_buckets)
-		ecryptfs_hash_buckets++;
+	ecryptfs_hash_bits = 1;
+	while (ecryptfs_number_of_users >> ecryptfs_hash_bits)
+		ecryptfs_hash_bits++;
 	ecryptfs_daemon_hash = kmalloc((sizeof(struct hlist_head)
-					* ecryptfs_hash_buckets), GFP_KERNEL);
+					* (1 << ecryptfs_hash_bits)),
+				       GFP_KERNEL);
 	if (!ecryptfs_daemon_hash) {
 		rc = -ENOMEM;
 		printk(KERN_ERR "%s: Failed to allocate memory\n", __func__);
 		mutex_unlock(&ecryptfs_daemon_hash_mux);
 		goto out;
 	}
-	for (i = 0; i < ecryptfs_hash_buckets; i++)
+	for (i = 0; i < (1 << ecryptfs_hash_bits); i++)
 		INIT_HLIST_HEAD(&ecryptfs_daemon_hash[i]);
 	mutex_unlock(&ecryptfs_daemon_hash_mux);
 	ecryptfs_msg_ctx_arr = kmalloc((sizeof(struct ecryptfs_msg_ctx)
@@ -554,7 +555,7 @@
 		int i;
 
 		mutex_lock(&ecryptfs_daemon_hash_mux);
-		for (i = 0; i < ecryptfs_hash_buckets; i++) {
+		for (i = 0; i < (1 << ecryptfs_hash_bits); i++) {
 			int rc;
 
 			hlist_for_each_entry(daemon, elem,
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index ca7e2a0..2bcc043 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -200,6 +200,7 @@
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					mark_inode_dirty(inode);
 					if (error == 0)
 						acl = NULL;
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 1921443..3675088 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1552,7 +1552,7 @@
 		if (error)
 			return error;
 	}
-	if (iattr->ia_valid & ATTR_SIZE) {
+	if (iattr->ia_valid & ATTR_SIZE && iattr->ia_size != inode->i_size) {
 		error = ext2_setsize(inode, iattr->ia_size);
 		if (error)
 			return error;
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 01552ab..8a11fe2 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -205,6 +205,7 @@
 					return error;
 				else {
 					inode->i_mode = mode;
+					inode->i_ctime = CURRENT_TIME_SEC;
 					ext3_mark_inode_dirty(handle, inode);
 					if (error == 0)
 						acl = NULL;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 19df61c..0afc8c1 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3775,7 +3775,8 @@
 }
 
 static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
-			    ssize_t size, void *private)
+			    ssize_t size, void *private, int ret,
+			    bool is_async)
 {
         ext4_io_end_t *io_end = iocb->private;
 	struct workqueue_struct *wq;
@@ -3784,7 +3785,7 @@
 
 	/* if not async direct IO or dio with 0 bytes write, just return */
 	if (!io_end || !size)
-		return;
+		goto out;
 
 	ext_debug("ext4_end_io_dio(): io_end 0x%p"
 		  "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
@@ -3795,7 +3796,7 @@
 	if (io_end->flag != EXT4_IO_UNWRITTEN){
 		ext4_free_io_end(io_end);
 		iocb->private = NULL;
-		return;
+		goto out;
 	}
 
 	io_end->offset = offset;
@@ -3812,6 +3813,9 @@
 	list_add_tail(&io_end->list, &ei->i_completed_io_list);
 	spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
 	iocb->private = NULL;
+out:
+	if (is_async)
+		aio_complete(iocb, ret, 0);
 }
 
 static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate)
@@ -4942,20 +4946,26 @@
 /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */
 void ext4_get_inode_flags(struct ext4_inode_info *ei)
 {
-	unsigned int flags = ei->vfs_inode.i_flags;
+	unsigned int vfs_fl;
+	unsigned long old_fl, new_fl;
 
-	ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
-			EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL);
-	if (flags & S_SYNC)
-		ei->i_flags |= EXT4_SYNC_FL;
-	if (flags & S_APPEND)
-		ei->i_flags |= EXT4_APPEND_FL;
-	if (flags & S_IMMUTABLE)
-		ei->i_flags |= EXT4_IMMUTABLE_FL;
-	if (flags & S_NOATIME)
-		ei->i_flags |= EXT4_NOATIME_FL;
-	if (flags & S_DIRSYNC)
-		ei->i_flags |= EXT4_DIRSYNC_FL;
+	do {
+		vfs_fl = ei->vfs_inode.i_flags;
+		old_fl = ei->i_flags;
+		new_fl = old_fl & ~(EXT4_SYNC_FL|EXT4_APPEND_FL|
+				EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|
+				EXT4_DIRSYNC_FL);
+		if (vfs_fl & S_SYNC)
+			new_fl |= EXT4_SYNC_FL;
+		if (vfs_fl & S_APPEND)
+			new_fl |= EXT4_APPEND_FL;
+		if (vfs_fl & S_IMMUTABLE)
+			new_fl |= EXT4_IMMUTABLE_FL;
+		if (vfs_fl & S_NOATIME)
+			new_fl |= EXT4_NOATIME_FL;
+		if (vfs_fl & S_DIRSYNC)
+			new_fl |= EXT4_DIRSYNC_FL;
+	} while (cmpxchg(&ei->i_flags, old_fl, new_fl) != old_fl);
 }
 
 static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
@@ -5191,7 +5201,7 @@
 		 */
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
 		raw_inode->i_blocks_high = 0;
-		ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+		ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 		return 0;
 	}
 	if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE))
@@ -5204,9 +5214,9 @@
 		 */
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
 		raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32);
-		ei->i_flags &= ~EXT4_HUGE_FILE_FL;
+		ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 	} else {
-		ei->i_flags |= EXT4_HUGE_FILE_FL;
+		ext4_set_inode_flag(inode, EXT4_INODE_HUGE_FILE);
 		/* i_block is stored in file system block size */
 		i_blocks = i_blocks >> (inode->i_blkbits - 9);
 		raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 3a6c92a..52abfa1 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -960,6 +960,9 @@
 		return -EINVAL;
 	}
 
+	if (IS_IMMUTABLE(donor_inode) || IS_APPEND(donor_inode))
+		return -EPERM;
+
 	/* Ext4 move extent does not support swapfile */
 	if (IS_SWAPFILE(orig_inode) || IS_SWAPFILE(donor_inode)) {
 		ext4_debug("ext4 move extent: The argument files should "
diff --git a/fs/fcntl.c b/fs/fcntl.c
index f74d270..9d175d6 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -274,7 +274,7 @@
 
 	ret = copy_from_user(&owner, owner_p, sizeof(owner));
 	if (ret)
-		return ret;
+		return -EFAULT;
 
 	switch (owner.type) {
 	case F_OWNER_TID:
@@ -332,8 +332,11 @@
 	}
 	read_unlock(&filp->f_owner.lock);
 
-	if (!ret)
+	if (!ret) {
 		ret = copy_to_user(owner_p, &owner, sizeof(owner));
+		if (ret)
+			ret = -EFAULT;
+	}
 	return ret;
 }
 
@@ -730,12 +733,14 @@
 {
 	while (fa) {
 		struct fown_struct *fown;
+		unsigned long flags;
+
 		if (fa->magic != FASYNC_MAGIC) {
 			printk(KERN_ERR "kill_fasync: bad magic number in "
 			       "fasync_struct!\n");
 			return;
 		}
-		spin_lock(&fa->fa_lock);
+		spin_lock_irqsave(&fa->fa_lock, flags);
 		if (fa->fa_file) {
 			fown = &fa->fa_file->f_owner;
 			/* Don't send SIGURG to processes which have not set a
@@ -744,7 +749,7 @@
 			if (!(sig == SIGURG && fown->signum == 0))
 				send_sigio(fown, fa->fa_fd, band);
 		}
-		spin_unlock(&fa->fa_lock);
+		spin_unlock_irqrestore(&fa->fa_lock, flags);
 		fa = rcu_dereference(fa->fa_next);
 	}
 }
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index ea8592b..d5be169 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -38,52 +38,18 @@
 /*
  * Passed into wb_writeback(), essentially a subset of writeback_control
  */
-struct wb_writeback_args {
+struct wb_writeback_work {
 	long nr_pages;
 	struct super_block *sb;
 	enum writeback_sync_modes sync_mode;
 	unsigned int for_kupdate:1;
 	unsigned int range_cyclic:1;
 	unsigned int for_background:1;
-	unsigned int sb_pinned:1;
-};
 
-/*
- * Work items for the bdi_writeback threads
- */
-struct bdi_work {
 	struct list_head list;		/* pending work list */
-	struct rcu_head rcu_head;	/* for RCU free/clear of work */
-
-	unsigned long seen;		/* threads that have seen this work */
-	atomic_t pending;		/* number of threads still to do work */
-
-	struct wb_writeback_args args;	/* writeback arguments */
-
-	unsigned long state;		/* flag bits, see WS_* */
+	struct completion *done;	/* set if the caller waits */
 };
 
-enum {
-	WS_USED_B = 0,
-	WS_ONSTACK_B,
-};
-
-#define WS_USED (1 << WS_USED_B)
-#define WS_ONSTACK (1 << WS_ONSTACK_B)
-
-static inline bool bdi_work_on_stack(struct bdi_work *work)
-{
-	return test_bit(WS_ONSTACK_B, &work->state);
-}
-
-static inline void bdi_work_init(struct bdi_work *work,
-				 struct wb_writeback_args *args)
-{
-	INIT_RCU_HEAD(&work->rcu_head);
-	work->args = *args;
-	work->state = WS_USED;
-}
-
 /**
  * writeback_in_progress - determine whether there is writeback in progress
  * @bdi: the device's backing_dev_info structure.
@@ -96,76 +62,11 @@
 	return !list_empty(&bdi->work_list);
 }
 
-static void bdi_work_clear(struct bdi_work *work)
+static void bdi_queue_work(struct backing_dev_info *bdi,
+		struct wb_writeback_work *work)
 {
-	clear_bit(WS_USED_B, &work->state);
-	smp_mb__after_clear_bit();
-	/*
-	 * work can have disappeared at this point. bit waitq functions
-	 * should be able to tolerate this, provided bdi_sched_wait does
-	 * not dereference it's pointer argument.
-	*/
-	wake_up_bit(&work->state, WS_USED_B);
-}
-
-static void bdi_work_free(struct rcu_head *head)
-{
-	struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
-
-	if (!bdi_work_on_stack(work))
-		kfree(work);
-	else
-		bdi_work_clear(work);
-}
-
-static void wb_work_complete(struct bdi_work *work)
-{
-	const enum writeback_sync_modes sync_mode = work->args.sync_mode;
-	int onstack = bdi_work_on_stack(work);
-
-	/*
-	 * For allocated work, we can clear the done/seen bit right here.
-	 * For on-stack work, we need to postpone both the clear and free
-	 * to after the RCU grace period, since the stack could be invalidated
-	 * as soon as bdi_work_clear() has done the wakeup.
-	 */
-	if (!onstack)
-		bdi_work_clear(work);
-	if (sync_mode == WB_SYNC_NONE || onstack)
-		call_rcu(&work->rcu_head, bdi_work_free);
-}
-
-static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
-{
-	/*
-	 * The caller has retrieved the work arguments from this work,
-	 * drop our reference. If this is the last ref, delete and free it
-	 */
-	if (atomic_dec_and_test(&work->pending)) {
-		struct backing_dev_info *bdi = wb->bdi;
-
-		spin_lock(&bdi->wb_lock);
-		list_del_rcu(&work->list);
-		spin_unlock(&bdi->wb_lock);
-
-		wb_work_complete(work);
-	}
-}
-
-static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
-{
-	work->seen = bdi->wb_mask;
-	BUG_ON(!work->seen);
-	atomic_set(&work->pending, bdi->wb_cnt);
-	BUG_ON(!bdi->wb_cnt);
-
-	/*
-	 * list_add_tail_rcu() contains the necessary barriers to
-	 * make sure the above stores are seen before the item is
-	 * noticed on the list
-	 */
 	spin_lock(&bdi->wb_lock);
-	list_add_tail_rcu(&work->list, &bdi->work_list);
+	list_add_tail(&work->list, &bdi->work_list);
 	spin_unlock(&bdi->wb_lock);
 
 	/*
@@ -182,107 +83,59 @@
 	}
 }
 
-/*
- * Used for on-stack allocated work items. The caller needs to wait until
- * the wb threads have acked the work before it's safe to continue.
- */
-static void bdi_wait_on_work_clear(struct bdi_work *work)
+static void
+__bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+		bool range_cyclic, bool for_background)
 {
-	wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
-		    TASK_UNINTERRUPTIBLE);
-}
-
-static void bdi_alloc_queue_work(struct backing_dev_info *bdi,
-				 struct wb_writeback_args *args,
-				 int wait)
-{
-	struct bdi_work *work;
+	struct wb_writeback_work *work;
 
 	/*
 	 * This is WB_SYNC_NONE writeback, so if allocation fails just
 	 * wakeup the thread for old dirty data writeback
 	 */
-	work = kmalloc(sizeof(*work), GFP_ATOMIC);
-	if (work) {
-		bdi_work_init(work, args);
-		bdi_queue_work(bdi, work);
-		if (wait)
-			bdi_wait_on_work_clear(work);
-	} else {
-		struct bdi_writeback *wb = &bdi->wb;
-
-		if (wb->task)
-			wake_up_process(wb->task);
+	work = kzalloc(sizeof(*work), GFP_ATOMIC);
+	if (!work) {
+		if (bdi->wb.task)
+			wake_up_process(bdi->wb.task);
+		return;
 	}
-}
 
-/**
- * bdi_sync_writeback - start and wait for writeback
- * @bdi: the backing device to write from
- * @sb: write inodes from this super_block
- *
- * Description:
- *   This does WB_SYNC_ALL data integrity writeback and waits for the
- *   IO to complete. Callers must hold the sb s_umount semaphore for
- *   reading, to avoid having the super disappear before we are done.
- */
-static void bdi_sync_writeback(struct backing_dev_info *bdi,
-			       struct super_block *sb)
-{
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.sync_mode	= WB_SYNC_ALL,
-		.nr_pages	= LONG_MAX,
-		.range_cyclic	= 0,
-		/*
-		 * Setting sb_pinned is not necessary for WB_SYNC_ALL, but
-		 * lets make it explicitly clear.
-		 */
-		.sb_pinned	= 1,
-	};
-	struct bdi_work work;
+	work->sync_mode	= WB_SYNC_NONE;
+	work->nr_pages	= nr_pages;
+	work->range_cyclic = range_cyclic;
+	work->for_background = for_background;
 
-	bdi_work_init(&work, &args);
-	work.state |= WS_ONSTACK;
-
-	bdi_queue_work(bdi, &work);
-	bdi_wait_on_work_clear(&work);
+	bdi_queue_work(bdi, work);
 }
 
 /**
  * bdi_start_writeback - start writeback
  * @bdi: the backing device to write from
- * @sb: write inodes from this super_block
  * @nr_pages: the number of pages to write
- * @sb_locked: caller already holds sb umount sem.
  *
  * Description:
  *   This does WB_SYNC_NONE opportunistic writeback. The IO is only
  *   started when this function returns, we make no guarentees on
- *   completion. Caller specifies whether sb umount sem is held already or not.
+ *   completion. Caller need not hold sb s_umount semaphore.
  *
  */
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
-			 long nr_pages, int sb_locked)
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
 {
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.sync_mode	= WB_SYNC_NONE,
-		.nr_pages	= nr_pages,
-		.range_cyclic	= 1,
-		.sb_pinned	= sb_locked,
-	};
+	__bdi_start_writeback(bdi, nr_pages, true, false);
+}
 
-	/*
-	 * We treat @nr_pages=0 as the special case to do background writeback,
-	 * ie. to sync pages until the background dirty threshold is reached.
-	 */
-	if (!nr_pages) {
-		args.nr_pages = LONG_MAX;
-		args.for_background = 1;
-	}
-
-	bdi_alloc_queue_work(bdi, &args, sb_locked);
+/**
+ * bdi_start_background_writeback - start background writeback
+ * @bdi: the backing device to write from
+ *
+ * Description:
+ *   This does WB_SYNC_NONE background writeback. The IO is only
+ *   started when this function returns, we make no guarentees on
+ *   completion. Caller need not hold sb s_umount semaphore.
+ */
+void bdi_start_background_writeback(struct backing_dev_info *bdi)
+{
+	__bdi_start_writeback(bdi, LONG_MAX, true, true);
 }
 
 /*
@@ -572,75 +425,69 @@
 	return ret;
 }
 
-static void unpin_sb_for_writeback(struct super_block *sb)
-{
-	up_read(&sb->s_umount);
-	put_super(sb);
-}
-
-enum sb_pin_state {
-	SB_PINNED,
-	SB_NOT_PINNED,
-	SB_PIN_FAILED
-};
-
 /*
- * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * For background writeback the caller does not have the sb pinned
  * before calling writeback. So make sure that we do pin it, so it doesn't
  * go away while we are writing inodes from it.
  */
-static enum sb_pin_state pin_sb_for_writeback(struct writeback_control *wbc,
-					      struct super_block *sb)
+static bool pin_sb_for_writeback(struct super_block *sb)
 {
-	/*
-	 * Caller must already hold the ref for this
-	 */
-	if (wbc->sync_mode == WB_SYNC_ALL || wbc->sb_pinned) {
-		WARN_ON(!rwsem_is_locked(&sb->s_umount));
-		return SB_NOT_PINNED;
-	}
 	spin_lock(&sb_lock);
+	if (list_empty(&sb->s_instances)) {
+		spin_unlock(&sb_lock);
+		return false;
+	}
+
 	sb->s_count++;
+	spin_unlock(&sb_lock);
+
 	if (down_read_trylock(&sb->s_umount)) {
-		if (sb->s_root) {
-			spin_unlock(&sb_lock);
-			return SB_PINNED;
-		}
-		/*
-		 * umounted, drop rwsem again and fall through to failure
-		 */
+		if (sb->s_root)
+			return true;
 		up_read(&sb->s_umount);
 	}
-	sb->s_count--;
-	spin_unlock(&sb_lock);
-	return SB_PIN_FAILED;
+
+	put_super(sb);
+	return false;
 }
 
 /*
  * Write a portion of b_io inodes which belong to @sb.
- * If @wbc->sb != NULL, then find and write all such
+ *
+ * If @only_this_sb is true, then find and write all such
  * inodes. Otherwise write only ones which go sequentially
  * in reverse order.
+ *
  * Return 1, if the caller writeback routine should be
  * interrupted. Otherwise return 0.
  */
-static int writeback_sb_inodes(struct super_block *sb,
-			       struct bdi_writeback *wb,
-			       struct writeback_control *wbc)
+static int writeback_sb_inodes(struct super_block *sb, struct bdi_writeback *wb,
+		struct writeback_control *wbc, bool only_this_sb)
 {
 	while (!list_empty(&wb->b_io)) {
 		long pages_skipped;
 		struct inode *inode = list_entry(wb->b_io.prev,
 						 struct inode, i_list);
-		if (wbc->sb && sb != inode->i_sb) {
-			/* super block given and doesn't
-			   match, skip this inode */
-			redirty_tail(inode);
-			continue;
-		}
-		if (sb != inode->i_sb)
-			/* finish with this superblock */
+
+		if (inode->i_sb != sb) {
+			if (only_this_sb) {
+				/*
+				 * We only want to write back data for this
+				 * superblock, move all inodes not belonging
+				 * to it back onto the dirty list.
+				 */
+				redirty_tail(inode);
+				continue;
+			}
+
+			/*
+			 * The inode belongs to a different superblock.
+			 * Bounce back to the caller to unpin this and
+			 * pin the next superblock.
+			 */
 			return 0;
+		}
+
 		if (inode->i_state & (I_NEW | I_WILL_FREE)) {
 			requeue_io(inode);
 			continue;
@@ -678,8 +525,8 @@
 	return 1;
 }
 
-static void writeback_inodes_wb(struct bdi_writeback *wb,
-				struct writeback_control *wbc)
+void writeback_inodes_wb(struct bdi_writeback *wb,
+		struct writeback_control *wbc)
 {
 	int ret = 0;
 
@@ -692,24 +539,14 @@
 		struct inode *inode = list_entry(wb->b_io.prev,
 						 struct inode, i_list);
 		struct super_block *sb = inode->i_sb;
-		enum sb_pin_state state;
 
-		if (wbc->sb && sb != wbc->sb) {
-			/* super block given and doesn't
-			   match, skip this inode */
-			redirty_tail(inode);
-			continue;
-		}
-		state = pin_sb_for_writeback(wbc, sb);
-
-		if (state == SB_PIN_FAILED) {
+		if (!pin_sb_for_writeback(sb)) {
 			requeue_io(inode);
 			continue;
 		}
-		ret = writeback_sb_inodes(sb, wb, wbc);
+		ret = writeback_sb_inodes(sb, wb, wbc, false);
+		drop_super(sb);
 
-		if (state == SB_PINNED)
-			unpin_sb_for_writeback(sb);
 		if (ret)
 			break;
 	}
@@ -717,11 +554,17 @@
 	/* Leave any unwritten inodes on b_io */
 }
 
-void writeback_inodes_wbc(struct writeback_control *wbc)
+static void __writeback_inodes_sb(struct super_block *sb,
+		struct bdi_writeback *wb, struct writeback_control *wbc)
 {
-	struct backing_dev_info *bdi = wbc->bdi;
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
 
-	writeback_inodes_wb(&bdi->wb, wbc);
+	wbc->wb_start = jiffies; /* livelock avoidance */
+	spin_lock(&inode_lock);
+	if (!wbc->for_kupdate || list_empty(&wb->b_io))
+		queue_io(wb, wbc->older_than_this);
+	writeback_sb_inodes(sb, wb, wbc, true);
+	spin_unlock(&inode_lock);
 }
 
 /*
@@ -759,17 +602,14 @@
  * all dirty pages if they are all attached to "old" mappings.
  */
 static long wb_writeback(struct bdi_writeback *wb,
-			 struct wb_writeback_args *args)
+			 struct wb_writeback_work *work)
 {
 	struct writeback_control wbc = {
-		.bdi			= wb->bdi,
-		.sb			= args->sb,
-		.sync_mode		= args->sync_mode,
+		.sync_mode		= work->sync_mode,
 		.older_than_this	= NULL,
-		.for_kupdate		= args->for_kupdate,
-		.for_background		= args->for_background,
-		.range_cyclic		= args->range_cyclic,
-		.sb_pinned		= args->sb_pinned,
+		.for_kupdate		= work->for_kupdate,
+		.for_background		= work->for_background,
+		.range_cyclic		= work->range_cyclic,
 	};
 	unsigned long oldest_jif;
 	long wrote = 0;
@@ -789,21 +629,24 @@
 		/*
 		 * Stop writeback when nr_pages has been consumed
 		 */
-		if (args->nr_pages <= 0)
+		if (work->nr_pages <= 0)
 			break;
 
 		/*
 		 * For background writeout, stop when we are below the
 		 * background dirty threshold
 		 */
-		if (args->for_background && !over_bground_thresh())
+		if (work->for_background && !over_bground_thresh())
 			break;
 
 		wbc.more_io = 0;
 		wbc.nr_to_write = MAX_WRITEBACK_PAGES;
 		wbc.pages_skipped = 0;
-		writeback_inodes_wb(wb, &wbc);
-		args->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+		if (work->sb)
+			__writeback_inodes_sb(work->sb, wb, &wbc);
+		else
+			writeback_inodes_wb(wb, &wbc);
+		work->nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 		wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 
 		/*
@@ -839,31 +682,21 @@
 }
 
 /*
- * Return the next bdi_work struct that hasn't been processed by this
- * wb thread yet. ->seen is initially set for each thread that exists
- * for this device, when a thread first notices a piece of work it
- * clears its bit. Depending on writeback type, the thread will notify
- * completion on either receiving the work (WB_SYNC_NONE) or after
- * it is done (WB_SYNC_ALL).
+ * Return the next wb_writeback_work struct that hasn't been processed yet.
  */
-static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
-					   struct bdi_writeback *wb)
+static struct wb_writeback_work *
+get_next_work_item(struct backing_dev_info *bdi, struct bdi_writeback *wb)
 {
-	struct bdi_work *work, *ret = NULL;
+	struct wb_writeback_work *work = NULL;
 
-	rcu_read_lock();
-
-	list_for_each_entry_rcu(work, &bdi->work_list, list) {
-		if (!test_bit(wb->nr, &work->seen))
-			continue;
-		clear_bit(wb->nr, &work->seen);
-
-		ret = work;
-		break;
+	spin_lock(&bdi->wb_lock);
+	if (!list_empty(&bdi->work_list)) {
+		work = list_entry(bdi->work_list.next,
+				  struct wb_writeback_work, list);
+		list_del_init(&work->list);
 	}
-
-	rcu_read_unlock();
-	return ret;
+	spin_unlock(&bdi->wb_lock);
+	return work;
 }
 
 static long wb_check_old_data_flush(struct bdi_writeback *wb)
@@ -888,14 +721,14 @@
 			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
 
 	if (nr_pages) {
-		struct wb_writeback_args args = {
+		struct wb_writeback_work work = {
 			.nr_pages	= nr_pages,
 			.sync_mode	= WB_SYNC_NONE,
 			.for_kupdate	= 1,
 			.range_cyclic	= 1,
 		};
 
-		return wb_writeback(wb, &args);
+		return wb_writeback(wb, &work);
 	}
 
 	return 0;
@@ -907,36 +740,27 @@
 long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
 {
 	struct backing_dev_info *bdi = wb->bdi;
-	struct bdi_work *work;
+	struct wb_writeback_work *work;
 	long wrote = 0;
 
 	while ((work = get_next_work_item(bdi, wb)) != NULL) {
-		struct wb_writeback_args args = work->args;
-		int post_clear;
-
 		/*
 		 * Override sync mode, in case we must wait for completion
+		 * because this thread is exiting now.
 		 */
 		if (force_wait)
-			work->args.sync_mode = args.sync_mode = WB_SYNC_ALL;
+			work->sync_mode = WB_SYNC_ALL;
 
-		post_clear = WB_SYNC_ALL || args.sb_pinned;
+		wrote += wb_writeback(wb, work);
 
 		/*
-		 * If this isn't a data integrity operation, just notify
-		 * that we have seen this work and we are now starting it.
+		 * Notify the caller of completion if this is a synchronous
+		 * work item, otherwise just free it.
 		 */
-		if (!post_clear)
-			wb_clear_pending(wb, work);
-
-		wrote += wb_writeback(wb, &args);
-
-		/*
-		 * This is a data integrity writeback, so only do the
-		 * notification when we have completed the work.
-		 */
-		if (post_clear)
-			wb_clear_pending(wb, work);
+		if (work->done)
+			complete(work->done);
+		else
+			kfree(work);
 	}
 
 	/*
@@ -993,40 +817,25 @@
 }
 
 /*
- * Schedule writeback for all backing devices. This does WB_SYNC_NONE
- * writeback, for integrity writeback see bdi_sync_writeback().
- */
-static void bdi_writeback_all(struct super_block *sb, long nr_pages)
-{
-	struct wb_writeback_args args = {
-		.sb		= sb,
-		.nr_pages	= nr_pages,
-		.sync_mode	= WB_SYNC_NONE,
-	};
-	struct backing_dev_info *bdi;
-
-	rcu_read_lock();
-
-	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
-		if (!bdi_has_dirty_io(bdi))
-			continue;
-
-		bdi_alloc_queue_work(bdi, &args, 0);
-	}
-
-	rcu_read_unlock();
-}
-
-/*
  * Start writeback of `nr_pages' pages.  If `nr_pages' is zero, write back
  * the whole world.
  */
 void wakeup_flusher_threads(long nr_pages)
 {
-	if (nr_pages == 0)
+	struct backing_dev_info *bdi;
+
+	if (!nr_pages) {
 		nr_pages = global_page_state(NR_FILE_DIRTY) +
 				global_page_state(NR_UNSTABLE_NFS);
-	bdi_writeback_all(NULL, nr_pages);
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
+		if (!bdi_has_dirty_io(bdi))
+			continue;
+		__bdi_start_writeback(bdi, nr_pages, false, false);
+	}
+	rcu_read_unlock();
 }
 
 static noinline void block_dump___mark_inode_dirty(struct inode *inode)
@@ -1220,18 +1029,6 @@
 	iput(old_inode);
 }
 
-static void __writeback_inodes_sb(struct super_block *sb, int sb_locked)
-{
-	unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
-	unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
-	long nr_to_write;
-
-	nr_to_write = nr_dirty + nr_unstable +
-			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
-
-	bdi_start_writeback(sb->s_bdi, sb, nr_to_write, sb_locked);
-}
-
 /**
  * writeback_inodes_sb	-	writeback dirty inodes from given super_block
  * @sb: the superblock
@@ -1243,23 +1040,26 @@
  */
 void writeback_inodes_sb(struct super_block *sb)
 {
-	__writeback_inodes_sb(sb, 0);
+	unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+	unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+	DECLARE_COMPLETION_ONSTACK(done);
+	struct wb_writeback_work work = {
+		.sb		= sb,
+		.sync_mode	= WB_SYNC_NONE,
+		.done		= &done,
+	};
+
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	work.nr_pages = nr_dirty + nr_unstable +
+			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+	bdi_queue_work(sb->s_bdi, &work);
+	wait_for_completion(&done);
 }
 EXPORT_SYMBOL(writeback_inodes_sb);
 
 /**
- * writeback_inodes_sb_locked	- writeback dirty inodes from given super_block
- * @sb: the superblock
- *
- * Like writeback_inodes_sb(), except the caller already holds the
- * sb umount sem.
- */
-void writeback_inodes_sb_locked(struct super_block *sb)
-{
-	__writeback_inodes_sb(sb, 1);
-}
-
-/**
  * writeback_inodes_sb_if_idle	-	start writeback if none underway
  * @sb: the superblock
  *
@@ -1269,7 +1069,9 @@
 int writeback_inodes_sb_if_idle(struct super_block *sb)
 {
 	if (!writeback_in_progress(sb->s_bdi)) {
+		down_read(&sb->s_umount);
 		writeback_inodes_sb(sb);
+		up_read(&sb->s_umount);
 		return 1;
 	} else
 		return 0;
@@ -1285,7 +1087,20 @@
  */
 void sync_inodes_sb(struct super_block *sb)
 {
-	bdi_sync_writeback(sb->s_bdi, sb);
+	DECLARE_COMPLETION_ONSTACK(done);
+	struct wb_writeback_work work = {
+		.sb		= sb,
+		.sync_mode	= WB_SYNC_ALL,
+		.nr_pages	= LONG_MAX,
+		.range_cyclic	= 0,
+		.done		= &done,
+	};
+
+	WARN_ON(!rwsem_is_locked(&sb->s_umount));
+
+	bdi_queue_work(sb->s_bdi, &work);
+	wait_for_completion(&done);
+
 	wait_sb_inodes(sb);
 }
 EXPORT_SYMBOL(sync_inodes_sb);
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 3cdc5f7..431be07 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1016,7 +1016,7 @@
 		   exist.  So if permissions are revoked this won't be
 		   noticed immediately, only after the attribute
 		   timeout has expired */
-	} else if (mask & MAY_ACCESS) {
+	} else if (mask & (MAY_ACCESS | MAY_CHDIR)) {
 		err = fuse_access(inode, mask);
 	} else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		if (!(inode->i_mode & S_IXUGO)) {
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 9f8b525..5e96cbd 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -136,10 +136,7 @@
 	if (ret <= 0)
 		return ret;
 
-	ret = mpage_writepage(page, gfs2_get_block_noalloc, wbc);
-	if (ret == -EAGAIN)
-		ret = block_write_full_page(page, gfs2_get_block_noalloc, wbc);
-	return ret;
+	return nobh_writepage(page, gfs2_get_block_noalloc, wbc);
 }
 
 /**
@@ -637,9 +634,7 @@
 		}
 	}
 
-	error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
-	if (error)
-		goto out_unlock;
+	alloc_required = gfs2_write_alloc_required(ip, pos, len);
 
 	if (alloc_required || gfs2_is_jdata(ip))
 		gfs2_write_calc_reserv(ip, len, &data_blocks, &ind_blocks);
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 4a48c0f..6f48280 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1040,7 +1040,8 @@
 		goto out;
 
 	if (gfs2_is_stuffed(ip)) {
-		u64 dsize = size + sizeof(struct gfs2_inode);
+		u64 dsize = size + sizeof(struct gfs2_dinode);
+		ip->i_disksize = size;
 		ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
 		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
 		gfs2_dinode_out(ip, dibh->b_data);
@@ -1243,13 +1244,12 @@
  * @ip: the file being written to
  * @offset: the offset to write to
  * @len: the number of bytes being written
- * @alloc_required: set to 1 if an alloc is required, 0 otherwise
  *
- * Returns: errno
+ * Returns: 1 if an alloc is required, 0 otherwise
  */
 
 int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
-			      unsigned int len, int *alloc_required)
+			      unsigned int len)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct buffer_head bh;
@@ -1257,26 +1257,23 @@
 	u64 lblock, lblock_stop, size;
 	u64 end_of_file;
 
-	*alloc_required = 0;
-
 	if (!len)
 		return 0;
 
 	if (gfs2_is_stuffed(ip)) {
 		if (offset + len >
 		    sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode))
-			*alloc_required = 1;
+			return 1;
 		return 0;
 	}
 
-	*alloc_required = 1;
 	shift = sdp->sd_sb.sb_bsize_shift;
 	BUG_ON(gfs2_is_dir(ip));
 	end_of_file = (ip->i_disksize + sdp->sd_sb.sb_bsize - 1) >> shift;
 	lblock = offset >> shift;
 	lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift;
 	if (lblock_stop > end_of_file)
-		return 0;
+		return 1;
 
 	size = (lblock_stop - lblock) << shift;
 	do {
@@ -1284,12 +1281,11 @@
 		bh.b_size = size;
 		gfs2_block_map(&ip->i_inode, lblock, &bh, 0);
 		if (!buffer_mapped(&bh))
-			return 0;
+			return 1;
 		size -= bh.b_size;
 		lblock += (bh.b_size >> ip->i_inode.i_blkbits);
 	} while(size > 0);
 
-	*alloc_required = 0;
 	return 0;
 }
 
diff --git a/fs/gfs2/bmap.h b/fs/gfs2/bmap.h
index c983177..a20a521 100644
--- a/fs/gfs2/bmap.h
+++ b/fs/gfs2/bmap.h
@@ -52,6 +52,6 @@
 int gfs2_truncatei_resume(struct gfs2_inode *ip);
 int gfs2_file_dealloc(struct gfs2_inode *ip);
 int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
-			      unsigned int len, int *alloc_required);
+			      unsigned int len);
 
 #endif /* __BMAP_DOT_H__ */
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 8295c5b..b9dd88a 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -392,7 +392,7 @@
 	unsigned totlen = be16_to_cpu(dent->de_rec_len);
 
 	if (gfs2_dirent_sentinel(dent))
-		actual = GFS2_DIRENT_SIZE(0);
+		actual = 0;
 	if (totlen - actual >= required)
 		return 1;
 	return 0;
@@ -955,7 +955,12 @@
 	/* Change the pointers.
 	   Don't bother distinguishing stuffed from non-stuffed.
 	   This code is complicated enough already. */
-	lp = kmalloc(half_len * sizeof(__be64), GFP_NOFS | __GFP_NOFAIL);
+	lp = kmalloc(half_len * sizeof(__be64), GFP_NOFS);
+	if (!lp) {
+		error = -ENOMEM;
+		goto fail_brelse;
+	}
+
 	/*  Change the pointers  */
 	for (x = 0; x < half_len; x++)
 		lp[x] = cpu_to_be64(bn);
@@ -1063,7 +1068,9 @@
 
 	/*  Allocate both the "from" and "to" buffers in one big chunk  */
 
-	buf = kcalloc(3, sdp->sd_hash_bsize, GFP_NOFS | __GFP_NOFAIL);
+	buf = kcalloc(3, sdp->sd_hash_bsize, GFP_NOFS);
+	if (!buf)
+		return -ENOMEM;
 
 	for (block = dip->i_disksize >> sdp->sd_hash_bsize_shift; block--;) {
 		error = gfs2_dir_read_data(dip, (char *)buf,
@@ -1231,6 +1238,25 @@
 	return 0;
 }
 
+static void *gfs2_alloc_sort_buffer(unsigned size)
+{
+	void *ptr = NULL;
+
+	if (size < KMALLOC_MAX_SIZE)
+		ptr = kmalloc(size, GFP_NOFS | __GFP_NOWARN);
+	if (!ptr)
+		ptr = __vmalloc(size, GFP_NOFS, PAGE_KERNEL);
+	return ptr;
+}
+
+static void gfs2_free_sort_buffer(void *ptr)
+{
+	if (is_vmalloc_addr(ptr))
+		vfree(ptr);
+	else
+		kfree(ptr);
+}
+
 static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
 			      filldir_t filldir, int *copied, unsigned *depth,
 			      u64 leaf_no)
@@ -1271,7 +1297,7 @@
 	 * 99 is the maximum number of entries that can fit in a single
 	 * leaf block.
 	 */
-	larr = vmalloc((leaves + entries + 99) * sizeof(void *));
+	larr = gfs2_alloc_sort_buffer((leaves + entries + 99) * sizeof(void *));
 	if (!larr)
 		goto out;
 	darr = (const struct gfs2_dirent **)(larr + leaves);
@@ -1282,7 +1308,7 @@
 	do {
 		error = get_leaf(ip, lfn, &bh);
 		if (error)
-			goto out_kfree;
+			goto out_free;
 		lf = (struct gfs2_leaf *)bh->b_data;
 		lfn = be64_to_cpu(lf->lf_next);
 		if (lf->lf_entries) {
@@ -1291,7 +1317,7 @@
 						gfs2_dirent_gather, NULL, &g);
 			error = PTR_ERR(dent);
 			if (IS_ERR(dent))
-				goto out_kfree;
+				goto out_free;
 			if (entries2 != g.offset) {
 				fs_warn(sdp, "Number of entries corrupt in dir "
 						"leaf %llu, entries2 (%u) != "
@@ -1300,7 +1326,7 @@
 					entries2, g.offset);
 					
 				error = -EIO;
-				goto out_kfree;
+				goto out_free;
 			}
 			error = 0;
 			larr[leaf++] = bh;
@@ -1312,10 +1338,10 @@
 	BUG_ON(entries2 != entries);
 	error = do_filldir_main(ip, offset, opaque, filldir, darr,
 				entries, copied);
-out_kfree:
+out_free:
 	for(i = 0; i < leaf; i++)
 		brelse(larr[i]);
-	vfree(larr);
+	gfs2_free_sort_buffer(larr);
 out:
 	return error;
 }
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index ed9a94f..4edd662 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -351,7 +351,6 @@
 	unsigned long last_index;
 	u64 pos = page->index << PAGE_CACHE_SHIFT;
 	unsigned int data_blocks, ind_blocks, rblocks;
-	int alloc_required = 0;
 	struct gfs2_holder gh;
 	struct gfs2_alloc *al;
 	int ret;
@@ -364,8 +363,7 @@
 	set_bit(GLF_DIRTY, &ip->i_gl->gl_flags);
 	set_bit(GIF_SW_PAGED, &ip->i_flags);
 
-	ret = gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE, &alloc_required);
-	if (ret || !alloc_required)
+	if (!gfs2_write_alloc_required(ip, pos, PAGE_CACHE_SIZE))
 		goto out_unlock;
 	ret = -ENOMEM;
 	al = gfs2_alloc_get(ip);
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ddcdbf4..9adf8f9 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -328,6 +328,30 @@
 }
 
 /**
+ * do_error - Something unexpected has happened during a lock request
+ *
+ */
+
+static inline void do_error(struct gfs2_glock *gl, const int ret)
+{
+	struct gfs2_holder *gh, *tmp;
+
+	list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
+		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
+			continue;
+		if (ret & LM_OUT_ERROR)
+			gh->gh_error = -EIO;
+		else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
+			gh->gh_error = GLR_TRYFAILED;
+		else
+			continue;
+		list_del_init(&gh->gh_list);
+		trace_gfs2_glock_queue(gh, 0);
+		gfs2_holder_wake(gh);
+	}
+}
+
+/**
  * do_promote - promote as many requests as possible on the current queue
  * @gl: The glock
  * 
@@ -375,36 +399,13 @@
 		}
 		if (gh->gh_list.prev == &gl->gl_holders)
 			return 1;
+		do_error(gl, 0);
 		break;
 	}
 	return 0;
 }
 
 /**
- * do_error - Something unexpected has happened during a lock request
- *
- */
-
-static inline void do_error(struct gfs2_glock *gl, const int ret)
-{
-	struct gfs2_holder *gh, *tmp;
-
-	list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) {
-		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
-			continue;
-		if (ret & LM_OUT_ERROR)
-			gh->gh_error = -EIO;
-		else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))
-			gh->gh_error = GLR_TRYFAILED;
-		else
-			continue;
-		list_del_init(&gh->gh_list);
-		trace_gfs2_glock_queue(gh, 0);
-		gfs2_holder_wake(gh);
-	}
-}
-
-/**
  * find_first_waiter - find the first gh that's waiting for the glock
  * @gl: the glock
  */
@@ -1062,6 +1063,9 @@
 
 	spin_lock(&gl->gl_spin);
 	add_to_queue(gh);
+	if ((LM_FLAG_NOEXP & gh->gh_flags) &&
+	    test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
+		set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
 	run_queue(gl, 1);
 	spin_unlock(&gl->gl_spin);
 
@@ -1319,6 +1323,36 @@
 }
 
 /**
+ * gfs2_should_freeze - Figure out if glock should be frozen
+ * @gl: The glock in question
+ *
+ * Glocks are not frozen if (a) the result of the dlm operation is
+ * an error, (b) the locking operation was an unlock operation or
+ * (c) if there is a "noexp" flagged request anywhere in the queue
+ *
+ * Returns: 1 if freezing should occur, 0 otherwise
+ */
+
+static int gfs2_should_freeze(const struct gfs2_glock *gl)
+{
+	const struct gfs2_holder *gh;
+
+	if (gl->gl_reply & ~LM_OUT_ST_MASK)
+		return 0;
+	if (gl->gl_target == LM_ST_UNLOCKED)
+		return 0;
+
+	list_for_each_entry(gh, &gl->gl_holders, gh_list) {
+		if (test_bit(HIF_HOLDER, &gh->gh_iflags))
+			continue;
+		if (LM_FLAG_NOEXP & gh->gh_flags)
+			return 0;
+	}
+
+	return 1;
+}
+
+/**
  * gfs2_glock_complete - Callback used by locking
  * @gl: Pointer to the glock
  * @ret: The return value from the dlm
@@ -1328,18 +1362,17 @@
 void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 {
 	struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
+
 	gl->gl_reply = ret;
+
 	if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_flags))) {
-		struct gfs2_holder *gh;
 		spin_lock(&gl->gl_spin);
-		gh = find_first_waiter(gl);
-		if ((!(gh && (gh->gh_flags & LM_FLAG_NOEXP)) &&
-		     (gl->gl_target != LM_ST_UNLOCKED)) ||
-		    ((ret & ~LM_OUT_ST_MASK) != 0))
+		if (gfs2_should_freeze(gl)) {
 			set_bit(GLF_FROZEN, &gl->gl_flags);
-		spin_unlock(&gl->gl_spin);
-		if (test_bit(GLF_FROZEN, &gl->gl_flags))
+			spin_unlock(&gl->gl_spin);
 			return;
+		}
+		spin_unlock(&gl->gl_spin);
 	}
 	set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
 	gfs2_glock_hold(gl);
@@ -1348,7 +1381,7 @@
 }
 
 
-static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
+static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	struct gfs2_glock *gl;
 	int may_demote;
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index b5d7363..8fcbce4 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -460,6 +460,7 @@
 	SDF_NOBARRIERS		= 3,
 	SDF_NORECOVERY		= 4,
 	SDF_DEMOTE		= 5,
+	SDF_NOJOURNALID		= 6,
 };
 
 #define GFS2_FSNAME_LEN		256
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index b5612cb..f03afd9 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -169,7 +169,7 @@
 {
 	struct inode *inode;
 	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl;
+	struct gfs2_glock *io_gl = NULL;
 	int error;
 
 	inode = gfs2_iget(sb, no_addr);
@@ -198,6 +198,7 @@
 		ip->i_iopen_gh.gh_gl->gl_object = ip;
 
 		gfs2_glock_put(io_gl);
+		io_gl = NULL;
 
 		if ((type == DT_UNKNOWN) && (no_formal_ino == 0))
 			goto gfs2_nfsbypass;
@@ -228,7 +229,8 @@
 fail_glock:
 	gfs2_glock_dq(&ip->i_iopen_gh);
 fail_iopen:
-	gfs2_glock_put(io_gl);
+	if (io_gl)
+		gfs2_glock_put(io_gl);
 fail_put:
 	if (inode->i_state & I_NEW)
 		ip->i_gl->gl_object = NULL;
@@ -256,7 +258,7 @@
 {
 	struct gfs2_sbd *sdp;
 	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl;
+	struct gfs2_glock *io_gl = NULL;
 	int error;
 	struct gfs2_holder gh;
 	struct inode *inode;
@@ -293,6 +295,7 @@
 
 	ip->i_iopen_gh.gh_gl->gl_object = ip;
 	gfs2_glock_put(io_gl);
+	io_gl = NULL;
 
 	inode->i_mode = DT2IF(DT_UNKNOWN);
 
@@ -319,7 +322,8 @@
 fail_glock:
 	gfs2_glock_dq(&ip->i_iopen_gh);
 fail_iopen:
-	gfs2_glock_put(io_gl);
+	if (io_gl)
+		gfs2_glock_put(io_gl);
 fail_put:
 	ip->i_gl->gl_object = NULL;
 	gfs2_glock_put(ip->i_gl);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3593b3a..45a4a36 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -76,7 +76,7 @@
 
 	sb->s_fs_info = sdp;
 	sdp->sd_vfs = sb;
-
+	set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
 	gfs2_tune_init(&sdp->sd_tune);
 
 	init_waitqueue_head(&sdp->sd_glock_wait);
@@ -1050,7 +1050,8 @@
 			ret = match_int(&tmp[0], &option);
 			if (ret || option < 0) 
 				goto hostdata_error;
-			ls->ls_jid = option;
+			if (test_and_clear_bit(SDF_NOJOURNALID, &sdp->sd_flags))
+				ls->ls_jid = option;
 			break;
 		case Opt_id:
 			/* Obsolete, but left for backward compat purposes */
@@ -1102,6 +1103,24 @@
 		lm->lm_unmount(sdp);
 }
 
+static int gfs2_journalid_wait(void *word)
+{
+	if (signal_pending(current))
+		return -EINTR;
+	schedule();
+	return 0;
+}
+
+static int wait_on_journal(struct gfs2_sbd *sdp)
+{
+	if (sdp->sd_args.ar_spectator)
+		return 0;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		return 0;
+
+	return wait_on_bit(&sdp->sd_flags, SDF_NOJOURNALID, gfs2_journalid_wait, TASK_INTERRUPTIBLE);
+}
+
 void gfs2_online_uevent(struct gfs2_sbd *sdp)
 {
 	struct super_block *sb = sdp->sd_vfs;
@@ -1194,6 +1213,10 @@
 	if (error)
 		goto fail_locking;
 
+	error = wait_on_journal(sdp);
+	if (error)
+		goto fail_sb;
+
 	error = init_inodes(sdp, DO);
 	if (error)
 		goto fail_sb;
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 49667d6..8bb643c 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -77,7 +77,7 @@
 static atomic_t qd_lru_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(qd_lru_lock);
 
-int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
+int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	struct gfs2_quota_data *qd;
 	struct gfs2_sbd *sdp;
@@ -694,10 +694,8 @@
 		if (!buffer_mapped(bh))
 			goto unlock_out;
 		/* If it's a newly allocated disk block for quota, zero it */
-		if (buffer_new(bh)) {
-			memset(bh->b_data, 0, bh->b_size);
-			set_buffer_uptodate(bh);
-		}
+		if (buffer_new(bh))
+			zero_user(page, pos - blocksize, bh->b_size);
 	}
 
 	if (PageUptodate(page))
@@ -723,7 +721,7 @@
 
 	/* If quota straddles page boundary, we need to update the rest of the
 	 * quota at the beginning of the next page */
-	if (offset != 0) { /* first page, offset is closer to PAGE_CACHE_SIZE */
+	if ((offset + sizeof(struct gfs2_quota)) > PAGE_CACHE_SIZE) {
 		ptr = ptr + nbytes;
 		nbytes = sizeof(struct gfs2_quota) - nbytes;
 		offset = 0;
@@ -789,15 +787,9 @@
 		goto out;
 
 	for (x = 0; x < num_qd; x++) {
-		int alloc_required;
-
 		offset = qd2offset(qda[x]);
-		error = gfs2_write_alloc_required(ip, offset,
-						  sizeof(struct gfs2_quota),
-						  &alloc_required);
-		if (error)
-			goto out_gunlock;
-		if (alloc_required)
+		if (gfs2_write_alloc_required(ip, offset,
+					      sizeof(struct gfs2_quota)))
 			nalloc++;
 	}
 
@@ -1586,10 +1578,7 @@
 		goto out_i;
 
 	offset = qd2offset(qd);
-	error = gfs2_write_alloc_required(ip, offset, sizeof(struct gfs2_quota),
-					  &alloc_required);
-	if (error)
-		goto out_i;
+	alloc_required = gfs2_write_alloc_required(ip, offset, sizeof(struct gfs2_quota));
 	if (alloc_required) {
 		al = gfs2_alloc_get(ip);
 		if (al == NULL)
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 195f60c..e7d236c 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -51,7 +51,7 @@
 	return ret;
 }
 
-extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask);
 extern const struct quotactl_ops gfs2_quotactl_ops;
 
 #endif /* __QUOTA_DOT_H__ */
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 4d1aad3..4140811 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -342,8 +342,6 @@
 {
 	struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
 	struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
-	int ar;
-	int error;
 
 	if (ip->i_disksize < (8 << 20) || ip->i_disksize > (1 << 30) ||
 	    (ip->i_disksize & (sdp->sd_sb.sb_bsize - 1))) {
@@ -352,13 +350,12 @@
 	}
 	jd->jd_blocks = ip->i_disksize >> sdp->sd_sb.sb_bsize_shift;
 
-	error = gfs2_write_alloc_required(ip, 0, ip->i_disksize, &ar);
-	if (!error && ar) {
+	if (gfs2_write_alloc_required(ip, 0, ip->i_disksize)) {
 		gfs2_consist_inode(ip);
-		error = -EIO;
+		return -EIO;
 	}
 
-	return error;
+	return 0;
 }
 
 /**
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 37f5393..d019d0d 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -325,6 +325,30 @@
 	return sprintf(buf, "%d\n", ls->ls_first);
 }
 
+static ssize_t lkfirst_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
+{
+	unsigned first;
+	int rv;
+
+	rv = sscanf(buf, "%u", &first);
+	if (rv != 1 || first > 1)
+		return -EINVAL;
+	spin_lock(&sdp->sd_jindex_spin);
+	rv = -EBUSY;
+	if (test_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0)
+		goto out;
+	rv = -EINVAL;
+	if (sdp->sd_args.ar_spectator)
+		goto out;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		goto out;
+        sdp->sd_lockstruct.ls_first = first;
+        rv = 0;
+out:
+        spin_unlock(&sdp->sd_jindex_spin);
+        return rv ? rv : len;
+}
+
 static ssize_t first_done_show(struct gfs2_sbd *sdp, char *buf)
 {
 	struct lm_lockstruct *ls = &sdp->sd_lockstruct;
@@ -377,14 +401,41 @@
 	return sprintf(buf, "%u\n", sdp->sd_lockstruct.ls_jid);
 }
 
+static ssize_t jid_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
+{
+        unsigned jid;
+	int rv;
+
+	rv = sscanf(buf, "%u", &jid);
+	if (rv != 1)
+		return -EINVAL;
+
+	spin_lock(&sdp->sd_jindex_spin);
+	rv = -EINVAL;
+	if (sdp->sd_args.ar_spectator)
+		goto out;
+	if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
+		goto out;
+	rv = -EBUSY;
+	if (test_and_clear_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0)
+		goto out;
+	sdp->sd_lockstruct.ls_jid = jid;
+	smp_mb__after_clear_bit();
+	wake_up_bit(&sdp->sd_flags, SDF_NOJOURNALID);
+	rv = 0;
+out:
+	spin_unlock(&sdp->sd_jindex_spin);
+	return rv ? rv : len;
+}
+
 #define GDLM_ATTR(_name,_mode,_show,_store) \
 static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store)
 
 GDLM_ATTR(proto_name,		0444, proto_name_show,		NULL);
 GDLM_ATTR(block,		0644, block_show,		block_store);
 GDLM_ATTR(withdraw,		0644, withdraw_show,		withdraw_store);
-GDLM_ATTR(jid,			0444, jid_show,			NULL);
-GDLM_ATTR(first,		0444, lkfirst_show,		NULL);
+GDLM_ATTR(jid,			0644, jid_show,			jid_store);
+GDLM_ATTR(first,		0644, lkfirst_show,		lkfirst_store);
 GDLM_ATTR(first_done,		0444, first_done_show,		NULL);
 GDLM_ATTR(recover,		0600, NULL,			recover_store);
 GDLM_ATTR(recover_done,		0444, recover_done_show,	NULL);
@@ -564,7 +615,7 @@
 
 	add_uevent_var(env, "LOCKTABLE=%s", sdp->sd_table_name);
 	add_uevent_var(env, "LOCKPROTO=%s", sdp->sd_proto_name);
-	if (!sdp->sd_args.ar_spectator)
+	if (!test_bit(SDF_NOJOURNALID, &sdp->sd_flags))
 		add_uevent_var(env, "JOURNALID=%u", sdp->sd_lockstruct.ls_jid);
 	if (gfs2_uuid_valid(uuid))
 		add_uevent_var(env, "UUID=%pUB", uuid);
diff --git a/fs/inode.c b/fs/inode.c
index 2bee20a..722860b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -512,7 +512,7 @@
  * This function is passed the number of inodes to scan, and it returns the
  * total number of remaining possibly-reclaimable inodes.
  */
-static int shrink_icache_memory(int nr, gfp_t gfp_mask)
+static int shrink_icache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		/*
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff59..0368808 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,7 +297,6 @@
 	struct page *new_page;
 	unsigned int new_offset;
 	struct buffer_head *bh_in = jh2bh(jh_in);
-	struct jbd2_buffer_trigger_type *triggers;
 	journal_t *journal = transaction->t_journal;
 
 	/*
@@ -328,21 +327,21 @@
 		done_copy_out = 1;
 		new_page = virt_to_page(jh_in->b_frozen_data);
 		new_offset = offset_in_page(jh_in->b_frozen_data);
-		triggers = jh_in->b_frozen_triggers;
 	} else {
 		new_page = jh2bh(jh_in)->b_page;
 		new_offset = offset_in_page(jh2bh(jh_in)->b_data);
-		triggers = jh_in->b_triggers;
 	}
 
 	mapped_data = kmap_atomic(new_page, KM_USER0);
 	/*
-	 * Fire any commit trigger.  Do this before checking for escaping,
-	 * as the trigger may modify the magic offset.  If a copy-out
-	 * happens afterwards, it will have the correct data in the buffer.
+	 * Fire data frozen trigger if data already wasn't frozen.  Do this
+	 * before checking for escaping, as the trigger may modify the magic
+	 * offset.  If a copy-out happens afterwards, it will have the correct
+	 * data in the buffer.
 	 */
-	jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
-				   triggers);
+	if (!done_copy_out)
+		jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+					   jh_in->b_triggers);
 
 	/*
 	 * Check for escaping
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e214d68..b8e0806 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -725,6 +725,9 @@
 		page = jh2bh(jh)->b_page;
 		offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
 		source = kmap_atomic(page, KM_USER0);
+		/* Fire data frozen trigger just before we copy the data */
+		jbd2_buffer_frozen_trigger(jh, source + offset,
+					   jh->b_triggers);
 		memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
 		kunmap_atomic(source, KM_USER0);
 
@@ -963,15 +966,15 @@
 	jh->b_triggers = type;
 }
 
-void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
 				struct jbd2_buffer_trigger_type *triggers)
 {
 	struct buffer_head *bh = jh2bh(jh);
 
-	if (!triggers || !triggers->t_commit)
+	if (!triggers || !triggers->t_frozen)
 		return;
 
-	triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+	triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
 }
 
 void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index a33aab6..54a92fd 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -234,8 +234,9 @@
 			if (inode->i_mode != mode) {
 				struct iattr attr;
 
-				attr.ia_valid = ATTR_MODE;
+				attr.ia_valid = ATTR_MODE | ATTR_CTIME;
 				attr.ia_mode = mode;
+				attr.ia_ctime = CURRENT_TIME_SEC;
 				rc = jffs2_do_setattr(inode, &attr);
 				if (rc < 0)
 					return rc;
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 7aa4417..166062a 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -222,15 +222,18 @@
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(ri->ctime));
 
 	jffs2_free_raw_inode(ri);
-	d_instantiate(dentry, inode);
 
 	D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n",
 		  inode->i_ino, inode->i_mode, inode->i_nlink,
 		  f->inocache->pino_nlink, inode->i_mapping->nrpages));
+
+	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
 
  fail:
 	make_bad_inode(inode);
+	unlock_new_inode(inode);
 	iput(inode);
 	jffs2_free_raw_inode(ri);
 	return ret;
@@ -360,8 +363,8 @@
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 
 	/* We use f->target field to store the target path. */
@@ -370,8 +373,8 @@
 		printk(KERN_WARNING "Can't allocate %d bytes of memory\n", targetlen + 1);
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	memcpy(f->target, target, targetlen + 1);
@@ -386,30 +389,24 @@
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -437,8 +434,8 @@
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -453,7 +450,14 @@
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 
@@ -519,8 +523,8 @@
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 	/* No data here. Only a metadata node, which will be
 	   obsoleted by the first data write
@@ -531,30 +535,24 @@
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -582,8 +580,8 @@
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -599,7 +597,14 @@
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
@@ -693,8 +698,8 @@
 		/* Eeek. Wave bye bye */
 		mutex_unlock(&f->sem);
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fn);
+		ret = PTR_ERR(fn);
+		goto fail;
 	}
 	/* No data here. Only a metadata node, which will be
 	   obsoleted by the first data write
@@ -705,30 +710,24 @@
 	jffs2_complete_reservation(c);
 
 	ret = jffs2_init_security(inode, dir_i);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
+
 	ret = jffs2_init_acl_post(inode);
-	if (ret) {
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen,
 				  ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen));
-	if (ret) {
-		/* Eep. */
-		jffs2_clear_inode(inode);
-		return ret;
-	}
+	if (ret)
+		goto fail;
 
 	rd = jffs2_alloc_raw_dirent();
 	if (!rd) {
 		/* Argh. Now we treat it like a normal delete */
 		jffs2_complete_reservation(c);
-		jffs2_clear_inode(inode);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
 	dir_f = JFFS2_INODE_INFO(dir_i);
@@ -759,8 +758,8 @@
 		jffs2_complete_reservation(c);
 		jffs2_free_raw_dirent(rd);
 		mutex_unlock(&dir_f->sem);
-		jffs2_clear_inode(inode);
-		return PTR_ERR(fd);
+		ret = PTR_ERR(fd);
+		goto fail;
 	}
 
 	dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(rd->mctime));
@@ -775,8 +774,14 @@
 	jffs2_complete_reservation(c);
 
 	d_instantiate(dentry, inode);
-
+	unlock_new_inode(inode);
 	return 0;
+
+ fail:
+	make_bad_inode(inode);
+	unlock_new_inode(inode);
+	iput(inode);
+	return ret;
 }
 
 static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 8bc2c80..459d39d 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -465,7 +465,12 @@
 	inode->i_blocks = 0;
 	inode->i_size = 0;
 
-	insert_inode_hash(inode);
+	if (insert_inode_locked(inode) < 0) {
+		make_bad_inode(inode);
+		unlock_new_inode(inode);
+		iput(inode);
+		return ERR_PTR(-EINVAL);
+	}
 
 	return inode;
 }
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index a2d58c9..d258e26 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -626,7 +626,7 @@
 
 static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
 {
-	/* success of check_xattr_ref_inode() means taht inode (ic) dose not have
+	/* success of check_xattr_ref_inode() means that inode (ic) dose not have
 	 * duplicate name/value pairs. If duplicate name/value pair would be found,
 	 * one will be removed.
 	 */
diff --git a/fs/libfs.c b/fs/libfs.c
index 09e1016..dcaf972 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -489,7 +489,8 @@
  * unique inode values later for this filesystem, then you must take care
  * to pass it an appropriate max_reserved value to avoid collisions.
  */
-int simple_fill_super(struct super_block *s, int magic, struct tree_descr *files)
+int simple_fill_super(struct super_block *s, unsigned long magic,
+		      struct tree_descr *files)
 {
 	struct inode *inode;
 	struct dentry *root;
diff --git a/fs/mbcache.c b/fs/mbcache.c
index ec88ff3..e28f21b 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -115,7 +115,7 @@
  * What the mbcache registers as to get shrunk dynamically.
  */
 
-static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
+static int mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
 
 static struct shrinker mb_cache_shrinker = {
 	.shrink = mb_cache_shrink_fn,
@@ -191,13 +191,14 @@
  * This function is called by the kernel memory management when memory
  * gets low.
  *
+ * @shrink: (ignored)
  * @nr_to_scan: Number of objects to scan
  * @gfp_mask: (ignored)
  *
  * Returns the number of objects which are present in the cache.
  */
 static int
-mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
+mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(free_list);
 	struct list_head *l, *ltmp;
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index 9196958..1dbf921 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -75,10 +75,6 @@
 	if (!IS_ERR(page))
 		kmap(page);
 	return page;
-
-fail:
-	dir_put_page(page);
-	return ERR_PTR(-EIO);
 }
 
 static inline void *minix_next_entry(void *de, struct minix_sb_info *sbi)
diff --git a/fs/namei.c b/fs/namei.c
index 868d0cb..42d2d28 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -282,8 +282,7 @@
 	if (retval)
 		return retval;
 
-	return security_inode_permission(inode,
-			mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND));
+	return security_inode_permission(inode, mask);
 }
 
 /**
@@ -1484,8 +1483,7 @@
 	 */
 	error = locks_verify_locked(inode);
 	if (!error)
-		error = security_path_truncate(path, 0,
-				       ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+		error = security_path_truncate(path);
 	if (!error) {
 		error = do_truncate(path->dentry, 0,
 				    ATTR_MTIME|ATTR_CTIME|ATTR_OPEN,
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 7ec9b34..d25b525 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1286,6 +1286,55 @@
 #endif /* CONFIG_NFS_V4_1 */
 }
 
+static int nfs4_server_common_setup(struct nfs_server *server,
+		struct nfs_fh *mntfh)
+{
+	struct nfs_fattr *fattr;
+	int error;
+
+	BUG_ON(!server->nfs_client);
+	BUG_ON(!server->nfs_client->rpc_ops);
+	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
+
+	fattr = nfs_alloc_fattr();
+	if (fattr == NULL)
+		return -ENOMEM;
+
+	/* We must ensure the session is initialised first */
+	error = nfs4_init_session(server);
+	if (error < 0)
+		goto out;
+
+	/* Probe the root fh to retrieve its FSID and filehandle */
+	error = nfs4_get_rootfh(server, mntfh);
+	if (error < 0)
+		goto out;
+
+	dprintk("Server FSID: %llx:%llx\n",
+			(unsigned long long) server->fsid.major,
+			(unsigned long long) server->fsid.minor);
+	dprintk("Mount FH: %d\n", mntfh->size);
+
+	nfs4_session_set_rwsize(server);
+
+	error = nfs_probe_fsinfo(server, mntfh, fattr);
+	if (error < 0)
+		goto out;
+
+	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
+		server->namelen = NFS4_MAXNAMLEN;
+
+	spin_lock(&nfs_client_lock);
+	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
+	list_add_tail(&server->master_link, &nfs_volume_list);
+	spin_unlock(&nfs_client_lock);
+
+	server->mount_time = jiffies;
+out:
+	nfs_free_fattr(fattr);
+	return error;
+}
+
 /*
  * Create a version 4 volume record
  */
@@ -1346,7 +1395,6 @@
 struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
 				      struct nfs_fh *mntfh)
 {
-	struct nfs_fattr *fattr;
 	struct nfs_server *server;
 	int error;
 
@@ -1356,55 +1404,19 @@
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	/* set up the general RPC client */
 	error = nfs4_init_server(server, data);
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	error = nfs4_init_session(server);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	/* Probe the root fh to retrieve its FSID */
-	error = nfs4_get_rootfh(server, mntfh);
-	if (error < 0)
-		goto error;
-
-	dprintk("Server FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-	dprintk("Mount FH: %d\n", mntfh->size);
-
-	nfs4_session_set_rwsize(server);
-
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
-	if (error < 0)
-		goto error;
-
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
 	dprintk("<-- nfs4_create_server() = %p\n", server);
-	nfs_free_fattr(fattr);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_server() = error %d\n", error);
 	return ERR_PTR(error);
@@ -1418,7 +1430,6 @@
 {
 	struct nfs_client *parent_client;
 	struct nfs_server *server, *parent_server;
-	struct nfs_fattr *fattr;
 	int error;
 
 	dprintk("--> nfs4_create_referral_server()\n");
@@ -1427,11 +1438,6 @@
 	if (!server)
 		return ERR_PTR(-ENOMEM);
 
-	error = -ENOMEM;
-	fattr = nfs_alloc_fattr();
-	if (fattr == NULL)
-		goto error;
-
 	parent_server = NFS_SB(data->sb);
 	parent_client = parent_server->nfs_client;
 
@@ -1456,40 +1462,14 @@
 	if (error < 0)
 		goto error;
 
-	BUG_ON(!server->nfs_client);
-	BUG_ON(!server->nfs_client->rpc_ops);
-	BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
-	/* Probe the root fh to retrieve its FSID and filehandle */
-	error = nfs4_get_rootfh(server, mntfh);
+	error = nfs4_server_common_setup(server, mntfh);
 	if (error < 0)
 		goto error;
 
-	/* probe the filesystem info for this server filesystem */
-	error = nfs_probe_fsinfo(server, mntfh, fattr);
-	if (error < 0)
-		goto error;
-
-	if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
-		server->namelen = NFS4_MAXNAMLEN;
-
-	dprintk("Referral FSID: %llx:%llx\n",
-		(unsigned long long) server->fsid.major,
-		(unsigned long long) server->fsid.minor);
-
-	spin_lock(&nfs_client_lock);
-	list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
-	list_add_tail(&server->master_link, &nfs_volume_list);
-	spin_unlock(&nfs_client_lock);
-
-	server->mount_time = jiffies;
-
-	nfs_free_fattr(fattr);
 	dprintk("<-- nfs_create_referral_server() = %p\n", server);
 	return server;
 
 error:
-	nfs_free_fattr(fattr);
 	nfs_free_server(server);
 	dprintk("<-- nfs4_create_referral_server() = error %d\n", error);
 	return ERR_PTR(error);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 782b431..832e9e2 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1710,7 +1710,7 @@
 	}
 }
 
-int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+int nfs_access_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(head);
 	struct nfs_inode *nfsi;
@@ -1953,7 +1953,7 @@
 	if ((mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		goto out;
 	/* Is this sys_access() ? */
-	if (mask & MAY_ACCESS)
+	if (mask & (MAY_ACCESS | MAY_CHDIR))
 		goto force_lookup;
 
 	switch (inode->i_mode & S_IFMT) {
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 36a5e74..f036153 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -27,6 +27,7 @@
 #include <linux/pagemap.h>
 #include <linux/aio.h>
 #include <linux/gfp.h>
+#include <linux/swap.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -493,11 +494,19 @@
  */
 static int nfs_release_page(struct page *page, gfp_t gfp)
 {
+	struct address_space *mapping = page->mapping;
+
 	dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
 
 	/* Only do I/O if gfp is a superset of GFP_KERNEL */
-	if ((gfp & GFP_KERNEL) == GFP_KERNEL)
-		nfs_wb_page(page->mapping->host, page);
+	if (mapping && (gfp & GFP_KERNEL) == GFP_KERNEL) {
+		int how = FLUSH_SYNC;
+
+		/* Don't let kswapd deadlock waiting for OOM RPC calls */
+		if (current_is_kswapd())
+			how = 0;
+		nfs_commit_inode(mapping->host, how);
+	}
 	/* If PagePrivate() is set, then the page is not freeable */
 	if (PagePrivate(page))
 		return 0;
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 7428f7d..a70e446 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -146,7 +146,7 @@
 		goto out;
 	}
 
-	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_MODE)
+	if (!(fsinfo.fattr->valid & NFS_ATTR_FATTR_TYPE)
 			|| !S_ISDIR(fsinfo.fattr->mode)) {
 		printk(KERN_ERR "nfs4_get_rootfh:"
 		       " getroot encountered non-directory\n");
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index d8bd619..e70f44b 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -205,7 +205,8 @@
 void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
 
 /* dir.c */
-extern int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask);
+extern int nfs_access_cache_shrinker(struct shrinker *shrink,
+					int nr_to_scan, gfp_t gfp_mask);
 
 /* inode.c */
 extern struct workqueue_struct *nfsiod_workqueue;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 6bdef28..65c8dae 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -862,8 +862,8 @@
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
 		*p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
 		*p++ = cpu_to_be32(0);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
-		*p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_sec);
+		*p++ = cpu_to_be32(iap->ia_atime.tv_nsec);
 	}
 	else if (iap->ia_valid & ATTR_ATIME) {
 		bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 6bd19d8..df101d9 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -105,7 +105,7 @@
 static __be32 servaddr __initdata = 0;
 
 /* Name of directory to mount */
-static char nfs_export_path[NFS_MAXPATHLEN] __initdata = { 0, };
+static char nfs_export_path[NFS_MAXPATHLEN + 1] __initdata = { 0, };
 
 /* NFS-related data */
 static struct nfs_mount_data nfs_data __initdata = { 0, };/* NFS mount info */
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 04214fc..f9df16d 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -570,6 +570,22 @@
 	nfs_show_mountd_netid(m, nfss, showdefaults);
 }
 
+#ifdef CONFIG_NFS_V4
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+	struct nfs_client *clp = nfss->nfs_client;
+
+	seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
+	seq_printf(m, ",minorversion=%u", clp->cl_minorversion);
+}
+#else
+static void nfs_show_nfsv4_options(struct seq_file *m, struct nfs_server *nfss,
+				    int showdefaults)
+{
+}
+#endif
+
 /*
  * Describe the mount options in force on this server representation
  */
@@ -631,11 +647,9 @@
 
 	if (version != 4)
 		nfs_show_mountd_options(m, nfss, showdefaults);
+	else
+		nfs_show_nfsv4_options(m, nfss, showdefaults);
 
-#ifdef CONFIG_NFS_V4
-	if (clp->rpc_ops->version == 4)
-		seq_printf(m, ",clientaddr=%s", clp->cl_ipaddr);
-#endif
 	if (nfss->options & NFS_OPTION_FSCACHE)
 		seq_printf(m, ",fsc");
 }
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 91679e2..9f81bdd 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -222,7 +222,7 @@
 		clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
 }
 
-static struct nfs_page *nfs_find_and_lock_request(struct page *page)
+static struct nfs_page *nfs_find_and_lock_request(struct page *page, bool nonblock)
 {
 	struct inode *inode = page->mapping->host;
 	struct nfs_page *req;
@@ -241,7 +241,10 @@
 		 *	 request as dirty (in which case we don't care).
 		 */
 		spin_unlock(&inode->i_lock);
-		ret = nfs_wait_on_request(req);
+		if (!nonblock)
+			ret = nfs_wait_on_request(req);
+		else
+			ret = -EAGAIN;
 		nfs_release_request(req);
 		if (ret != 0)
 			return ERR_PTR(ret);
@@ -256,12 +259,12 @@
  * May return an error if the user signalled nfs_wait_on_request().
  */
 static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
-				struct page *page)
+				struct page *page, bool nonblock)
 {
 	struct nfs_page *req;
 	int ret = 0;
 
-	req = nfs_find_and_lock_request(page);
+	req = nfs_find_and_lock_request(page, nonblock);
 	if (!req)
 		goto out;
 	ret = PTR_ERR(req);
@@ -283,12 +286,20 @@
 static int nfs_do_writepage(struct page *page, struct writeback_control *wbc, struct nfs_pageio_descriptor *pgio)
 {
 	struct inode *inode = page->mapping->host;
+	int ret;
 
 	nfs_inc_stats(inode, NFSIOS_VFSWRITEPAGE);
 	nfs_add_stats(inode, NFSIOS_WRITEPAGES, 1);
 
 	nfs_pageio_cond_complete(pgio, page->index);
-	return nfs_page_async_flush(pgio, page);
+	ret = nfs_page_async_flush(pgio, page,
+			wbc->sync_mode == WB_SYNC_NONE ||
+			wbc->nonblocking != 0);
+	if (ret == -EAGAIN) {
+		redirty_page_for_writepage(wbc, page);
+		ret = 0;
+	}
+	return ret;
 }
 
 /*
@@ -1379,7 +1390,7 @@
 	.rpc_release = nfs_commit_release,
 };
 
-static int nfs_commit_inode(struct inode *inode, int how)
+int nfs_commit_inode(struct inode *inode, int how)
 {
 	LIST_HEAD(head);
 	int may_wait = how & FLUSH_SYNC;
@@ -1443,11 +1454,6 @@
 	return ret;
 }
 #else
-static int nfs_commit_inode(struct inode *inode, int how)
-{
-	return 0;
-}
-
 static int nfs_commit_unstable_pages(struct inode *inode, struct writeback_control *wbc)
 {
 	return 0;
@@ -1546,7 +1552,7 @@
 
 	nfs_fscache_release_page(page, GFP_KERNEL);
 
-	req = nfs_find_and_lock_request(page);
+	req = nfs_find_and_lock_request(page, false);
 	ret = PTR_ERR(req);
 	if (IS_ERR(req))
 		goto out;
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 12f7109..4a27347 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4122,8 +4122,8 @@
 	nfs4_lock_state();
 	nfs4_release_reclaim();
 	__nfs4_state_shutdown();
-	nfsd4_destroy_callback_queue();
 	nfs4_unlock_state();
+	nfsd4_destroy_callback_queue();
 }
 
 /*
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ebbf3b6..3c11112 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -443,8 +443,7 @@
 	if (size_change)
 		put_write_access(inode);
 	if (!err)
-		if (EX_ISSYNC(fhp->fh_export))
-			write_inode_now(inode, 1);
+		commit_metadata(fhp);
 out:
 	return err;
 
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index af638d5..43c8c5b 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -75,8 +75,6 @@
 
 extern struct kmem_cache *nilfs_btree_path_cache;
 
-int nilfs_btree_path_cache_init(void);
-void nilfs_btree_path_cache_destroy(void);
 int nilfs_btree_init(struct nilfs_bmap *);
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
 				   const __u64 *, const __u64 *, int);
diff --git a/fs/nilfs2/segbuf.h b/fs/nilfs2/segbuf.h
index fdf1c3b..85fbb66 100644
--- a/fs/nilfs2/segbuf.h
+++ b/fs/nilfs2/segbuf.h
@@ -127,8 +127,6 @@
 
 extern struct kmem_cache *nilfs_segbuf_cachep;
 
-int __init nilfs_init_segbuf_cache(void);
-void nilfs_destroy_segbuf_cache(void);
 struct nilfs_segment_buffer *nilfs_segbuf_new(struct super_block *);
 void nilfs_segbuf_free(struct nilfs_segment_buffer *);
 void nilfs_segbuf_map(struct nilfs_segment_buffer *, __u64, unsigned long,
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index dca1423..01e20db 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -221,8 +221,6 @@
 extern struct kmem_cache *nilfs_transaction_cachep;
 
 /* segment.c */
-extern int nilfs_init_transaction_cache(void);
-extern void nilfs_destroy_transaction_cache(void);
 extern void nilfs_relax_pressure_in_lock(struct super_block *);
 
 extern int nilfs_construct_segment(struct super_block *);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 03b34b7..414ef68 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -1130,13 +1130,13 @@
 
 static void nilfs_destroy_cachep(void)
 {
-	 if (nilfs_inode_cachep)
+	if (nilfs_inode_cachep)
 		kmem_cache_destroy(nilfs_inode_cachep);
-	 if (nilfs_transaction_cachep)
+	if (nilfs_transaction_cachep)
 		kmem_cache_destroy(nilfs_transaction_cachep);
-	 if (nilfs_segbuf_cachep)
+	if (nilfs_segbuf_cachep)
 		kmem_cache_destroy(nilfs_segbuf_cachep);
-	 if (nilfs_btree_path_cache)
+	if (nilfs_btree_path_cache)
 		kmem_cache_destroy(nilfs_btree_path_cache);
 }
 
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3623ca2..96337a4 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -196,15 +196,14 @@
 			dump_stack();
 			goto bail;
 		}
-
-		past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
-		mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
-		     (unsigned long long)past_eof);
-
-		if (create && (iblock >= past_eof))
-			set_buffer_new(bh_result);
 	}
 
+	past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
+	mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
+	     (unsigned long long)past_eof);
+	if (create && (iblock >= past_eof))
+		set_buffer_new(bh_result);
+
 bail:
 	if (err < 0)
 		err = -EIO;
@@ -459,36 +458,6 @@
 	return ret;
 }
 
-handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
-							 struct page *page,
-							 unsigned from,
-							 unsigned to)
-{
-	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-	handle_t *handle;
-	int ret = 0;
-
-	handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
-	if (IS_ERR(handle)) {
-		ret = -ENOMEM;
-		mlog_errno(ret);
-		goto out;
-	}
-
-	if (ocfs2_should_order_data(inode)) {
-		ret = ocfs2_jbd2_file_inode(handle, inode);
-		if (ret < 0)
-			mlog_errno(ret);
-	}
-out:
-	if (ret) {
-		if (!IS_ERR(handle))
-			ocfs2_commit_trans(osb, handle);
-		handle = ERR_PTR(ret);
-	}
-	return handle;
-}
-
 static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
 {
 	sector_t status;
@@ -609,7 +578,9 @@
 static void ocfs2_dio_end_io(struct kiocb *iocb,
 			     loff_t offset,
 			     ssize_t bytes,
-			     void *private)
+			     void *private,
+			     int ret,
+			     bool is_async)
 {
 	struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
 	int level;
@@ -623,6 +594,9 @@
 	if (!level)
 		up_read(&inode->i_alloc_sem);
 	ocfs2_rw_unlock(inode, level);
+
+	if (is_async)
+		aio_complete(iocb, ret, 0);
 }
 
 /*
@@ -1131,23 +1105,37 @@
  */
 static int ocfs2_grab_pages_for_write(struct address_space *mapping,
 				      struct ocfs2_write_ctxt *wc,
-				      u32 cpos, loff_t user_pos, int new,
+				      u32 cpos, loff_t user_pos,
+				      unsigned user_len, int new,
 				      struct page *mmap_page)
 {
 	int ret = 0, i;
-	unsigned long start, target_index, index;
+	unsigned long start, target_index, end_index, index;
 	struct inode *inode = mapping->host;
+	loff_t last_byte;
 
 	target_index = user_pos >> PAGE_CACHE_SHIFT;
 
 	/*
 	 * Figure out how many pages we'll be manipulating here. For
 	 * non allocating write, we just change the one
-	 * page. Otherwise, we'll need a whole clusters worth.
+	 * page. Otherwise, we'll need a whole clusters worth.  If we're
+	 * writing past i_size, we only need enough pages to cover the
+	 * last page of the write.
 	 */
 	if (new) {
 		wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
 		start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
+		/*
+		 * We need the index *past* the last page we could possibly
+		 * touch.  This is the page past the end of the write or
+		 * i_size, whichever is greater.
+		 */
+		last_byte = max(user_pos + user_len, i_size_read(inode));
+		BUG_ON(last_byte < 1);
+		end_index = ((last_byte - 1) >> PAGE_CACHE_SHIFT) + 1;
+		if ((start + wc->w_num_pages) > end_index)
+			wc->w_num_pages = end_index - start;
 	} else {
 		wc->w_num_pages = 1;
 		start = target_index;
@@ -1620,21 +1608,20 @@
  * write path can treat it as an non-allocating write, which has no
  * special case code for sparse/nonsparse files.
  */
-static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
-					unsigned len,
+static int ocfs2_expand_nonsparse_inode(struct inode *inode,
+					struct buffer_head *di_bh,
+					loff_t pos, unsigned len,
 					struct ocfs2_write_ctxt *wc)
 {
 	int ret;
-	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	loff_t newsize = pos + len;
 
-	if (ocfs2_sparse_alloc(osb))
-		return 0;
+	BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
 
 	if (newsize <= i_size_read(inode))
 		return 0;
 
-	ret = ocfs2_extend_no_holes(inode, newsize, pos);
+	ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
 	if (ret)
 		mlog_errno(ret);
 
@@ -1644,6 +1631,18 @@
 	return ret;
 }
 
+static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
+			   loff_t pos)
+{
+	int ret = 0;
+
+	BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
+	if (pos > i_size_read(inode))
+		ret = ocfs2_zero_extend(inode, di_bh, pos);
+
+	return ret;
+}
+
 int ocfs2_write_begin_nolock(struct address_space *mapping,
 			     loff_t pos, unsigned len, unsigned flags,
 			     struct page **pagep, void **fsdata,
@@ -1679,7 +1678,11 @@
 		}
 	}
 
-	ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
+	if (ocfs2_sparse_alloc(osb))
+		ret = ocfs2_zero_tail(inode, di_bh, pos);
+	else
+		ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
+						   wc);
 	if (ret) {
 		mlog_errno(ret);
 		goto out;
@@ -1789,7 +1792,7 @@
 	 * that we can zero and flush if we error after adding the
 	 * extent.
 	 */
-	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
+	ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
 					 cluster_of_pages, mmap_page);
 	if (ret) {
 		mlog_errno(ret);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6b5a492..153abb5 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1671,7 +1671,7 @@
 	struct dlm_ctxt *dlm = NULL;
 	struct dlm_ctxt *new_ctxt = NULL;
 
-	if (strlen(domain) > O2NM_MAX_NAME_LEN) {
+	if (strlen(domain) >= O2NM_MAX_NAME_LEN) {
 		ret = -ENAMETOOLONG;
 		mlog(ML_ERROR, "domain name length too long\n");
 		goto leave;
@@ -1709,6 +1709,7 @@
 		}
 
 		if (dlm_protocol_compare(&dlm->fs_locking_proto, fs_proto)) {
+			spin_unlock(&dlm_domain_lock);
 			mlog(ML_ERROR,
 			     "Requested locking protocol version is not "
 			     "compatible with already registered domain "
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 4a7506a..94b97fc 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2808,14 +2808,8 @@
 		mlog(0, "trying again...\n");
 		goto again;
 	}
-	/* now that we are sure the MIGRATING state is there, drop
-	 * the unneded state which blocked threads trying to DIRTY */
-	spin_lock(&res->spinlock);
-	BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
-	BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
-	res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
-	spin_unlock(&res->spinlock);
 
+	ret = 0;
 	/* did the target go down or die? */
 	spin_lock(&dlm->spinlock);
 	if (!test_bit(target, dlm->domain_map)) {
@@ -2826,9 +2820,21 @@
 	spin_unlock(&dlm->spinlock);
 
 	/*
+	 * if target is down, we need to clear DLM_LOCK_RES_BLOCK_DIRTY for
+	 * another try; otherwise, we are sure the MIGRATING state is there,
+	 * drop the unneded state which blocked threads trying to DIRTY
+	 */
+	spin_lock(&res->spinlock);
+	BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
+	res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
+	if (!ret)
+		BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
+	spin_unlock(&res->spinlock);
+
+	/*
 	 * at this point:
 	 *
-	 *   o the DLM_LOCK_RES_MIGRATING flag is set
+	 *   o the DLM_LOCK_RES_MIGRATING flag is set if target not down
 	 *   o there are no pending asts on this lockres
 	 *   o all processes trying to reserve an ast on this
 	 *     lockres must wait for the MIGRATING flag to clear
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index f8b75ce..9dfaac7 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -463,7 +463,7 @@
 	if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
 		int bit;
 
-		bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES+1, 0);
+		bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES, 0);
 		if (bit >= O2NM_MAX_NODES || bit < 0)
 			dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 		else
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 6a13ea6..2b10b36 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -724,28 +724,55 @@
 	return status;
 }
 
+/*
+ * While a write will already be ordering the data, a truncate will not.
+ * Thus, we need to explicitly order the zeroed pages.
+ */
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+{
+	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+	handle_t *handle = NULL;
+	int ret = 0;
+
+	if (!ocfs2_should_order_data(inode))
+		goto out;
+
+	handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+	if (IS_ERR(handle)) {
+		ret = -ENOMEM;
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_jbd2_file_inode(handle, inode);
+	if (ret < 0)
+		mlog_errno(ret);
+
+out:
+	if (ret) {
+		if (!IS_ERR(handle))
+			ocfs2_commit_trans(osb, handle);
+		handle = ERR_PTR(ret);
+	}
+	return handle;
+}
+
 /* Some parts of this taken from generic_cont_expand, which turned out
  * to be too fragile to do exactly what we need without us having to
  * worry about recursive locking in ->write_begin() and ->write_end(). */
-static int ocfs2_write_zero_page(struct inode *inode,
-				 u64 size)
+static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
+				 u64 abs_to)
 {
 	struct address_space *mapping = inode->i_mapping;
 	struct page *page;
-	unsigned long index;
-	unsigned int offset;
+	unsigned long index = abs_from >> PAGE_CACHE_SHIFT;
 	handle_t *handle = NULL;
-	int ret;
+	int ret = 0;
+	unsigned zero_from, zero_to, block_start, block_end;
 
-	offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
-	/* ugh.  in prepare/commit_write, if from==to==start of block, we
-	** skip the prepare.  make sure we never send an offset for the start
-	** of a block
-	*/
-	if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
-		offset++;
-	}
-	index = size >> PAGE_CACHE_SHIFT;
+	BUG_ON(abs_from >= abs_to);
+	BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
+	BUG_ON(abs_from & (inode->i_blkbits - 1));
 
 	page = grab_cache_page(mapping, index);
 	if (!page) {
@@ -754,31 +781,56 @@
 		goto out;
 	}
 
-	ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out_unlock;
-	}
+	/* Get the offsets within the page that we want to zero */
+	zero_from = abs_from & (PAGE_CACHE_SIZE - 1);
+	zero_to = abs_to & (PAGE_CACHE_SIZE - 1);
+	if (!zero_to)
+		zero_to = PAGE_CACHE_SIZE;
 
-	if (ocfs2_should_order_data(inode)) {
-		handle = ocfs2_start_walk_page_trans(inode, page, offset,
-						     offset);
-		if (IS_ERR(handle)) {
-			ret = PTR_ERR(handle);
-			handle = NULL;
+	mlog(0,
+	     "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n",
+	     (unsigned long long)abs_from, (unsigned long long)abs_to,
+	     index, zero_from, zero_to);
+
+	/* We know that zero_from is block aligned */
+	for (block_start = zero_from; block_start < zero_to;
+	     block_start = block_end) {
+		block_end = block_start + (1 << inode->i_blkbits);
+
+		/*
+		 * block_start is block-aligned.  Bump it by one to
+		 * force ocfs2_{prepare,commit}_write() to zero the
+		 * whole block.
+		 */
+		ret = ocfs2_prepare_write_nolock(inode, page,
+						 block_start + 1,
+						 block_start + 1);
+		if (ret < 0) {
+			mlog_errno(ret);
 			goto out_unlock;
 		}
-	}
 
-	/* must not update i_size! */
-	ret = block_commit_write(page, offset, offset);
-	if (ret < 0)
-		mlog_errno(ret);
-	else
-		ret = 0;
+		if (!handle) {
+			handle = ocfs2_zero_start_ordered_transaction(inode);
+			if (IS_ERR(handle)) {
+				ret = PTR_ERR(handle);
+				handle = NULL;
+				break;
+			}
+		}
+
+		/* must not update i_size! */
+		ret = block_commit_write(page, block_start + 1,
+					 block_start + 1);
+		if (ret < 0)
+			mlog_errno(ret);
+		else
+			ret = 0;
+	}
 
 	if (handle)
 		ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+
 out_unlock:
 	unlock_page(page);
 	page_cache_release(page);
@@ -786,22 +838,114 @@
 	return ret;
 }
 
-static int ocfs2_zero_extend(struct inode *inode,
-			     u64 zero_to_size)
+/*
+ * Find the next range to zero.  We do this in terms of bytes because
+ * that's what ocfs2_zero_extend() wants, and it is dealing with the
+ * pagecache.  We may return multiple extents.
+ *
+ * zero_start and zero_end are ocfs2_zero_extend()s current idea of what
+ * needs to be zeroed.  range_start and range_end return the next zeroing
+ * range.  A subsequent call should pass the previous range_end as its
+ * zero_start.  If range_end is 0, there's nothing to do.
+ *
+ * Unwritten extents are skipped over.  Refcounted extents are CoWd.
+ */
+static int ocfs2_zero_extend_get_range(struct inode *inode,
+				       struct buffer_head *di_bh,
+				       u64 zero_start, u64 zero_end,
+				       u64 *range_start, u64 *range_end)
 {
-	int ret = 0;
-	u64 start_off;
-	struct super_block *sb = inode->i_sb;
+	int rc = 0, needs_cow = 0;
+	u32 p_cpos, zero_clusters = 0;
+	u32 zero_cpos =
+		zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+	u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end);
+	unsigned int num_clusters = 0;
+	unsigned int ext_flags = 0;
 
-	start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
-	while (start_off < zero_to_size) {
-		ret = ocfs2_write_zero_page(inode, start_off);
-		if (ret < 0) {
-			mlog_errno(ret);
+	while (zero_cpos < last_cpos) {
+		rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos,
+					&num_clusters, &ext_flags);
+		if (rc) {
+			mlog_errno(rc);
 			goto out;
 		}
 
-		start_off += sb->s_blocksize;
+		if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
+			zero_clusters = num_clusters;
+			if (ext_flags & OCFS2_EXT_REFCOUNTED)
+				needs_cow = 1;
+			break;
+		}
+
+		zero_cpos += num_clusters;
+	}
+	if (!zero_clusters) {
+		*range_end = 0;
+		goto out;
+	}
+
+	while ((zero_cpos + zero_clusters) < last_cpos) {
+		rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters,
+					&p_cpos, &num_clusters,
+					&ext_flags);
+		if (rc) {
+			mlog_errno(rc);
+			goto out;
+		}
+
+		if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN))
+			break;
+		if (ext_flags & OCFS2_EXT_REFCOUNTED)
+			needs_cow = 1;
+		zero_clusters += num_clusters;
+	}
+	if ((zero_cpos + zero_clusters) > last_cpos)
+		zero_clusters = last_cpos - zero_cpos;
+
+	if (needs_cow) {
+		rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters,
+					UINT_MAX);
+		if (rc) {
+			mlog_errno(rc);
+			goto out;
+		}
+	}
+
+	*range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos);
+	*range_end = ocfs2_clusters_to_bytes(inode->i_sb,
+					     zero_cpos + zero_clusters);
+
+out:
+	return rc;
+}
+
+/*
+ * Zero one range returned from ocfs2_zero_extend_get_range().  The caller
+ * has made sure that the entire range needs zeroing.
+ */
+static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
+				   u64 range_end)
+{
+	int rc = 0;
+	u64 next_pos;
+	u64 zero_pos = range_start;
+
+	mlog(0, "range_start = %llu, range_end = %llu\n",
+	     (unsigned long long)range_start,
+	     (unsigned long long)range_end);
+	BUG_ON(range_start >= range_end);
+
+	while (zero_pos < range_end) {
+		next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
+		if (next_pos > range_end)
+			next_pos = range_end;
+		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+		if (rc < 0) {
+			mlog_errno(rc);
+			break;
+		}
+		zero_pos = next_pos;
 
 		/*
 		 * Very large extends have the potential to lock up
@@ -810,16 +954,63 @@
 		cond_resched();
 	}
 
-out:
+	return rc;
+}
+
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+		      loff_t zero_to_size)
+{
+	int ret = 0;
+	u64 zero_start, range_start = 0, range_end = 0;
+	struct super_block *sb = inode->i_sb;
+
+	zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
+	mlog(0, "zero_start %llu for i_size %llu\n",
+	     (unsigned long long)zero_start,
+	     (unsigned long long)i_size_read(inode));
+	while (zero_start < zero_to_size) {
+		ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start,
+						  zero_to_size,
+						  &range_start,
+						  &range_end);
+		if (ret) {
+			mlog_errno(ret);
+			break;
+		}
+		if (!range_end)
+			break;
+		/* Trim the ends */
+		if (range_start < zero_start)
+			range_start = zero_start;
+		if (range_end > zero_to_size)
+			range_end = zero_to_size;
+
+		ret = ocfs2_zero_extend_range(inode, range_start,
+					      range_end);
+		if (ret) {
+			mlog_errno(ret);
+			break;
+		}
+		zero_start = range_end;
+	}
+
 	return ret;
 }
 
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+			  u64 new_i_size, u64 zero_to)
 {
 	int ret;
 	u32 clusters_to_add;
 	struct ocfs2_inode_info *oi = OCFS2_I(inode);
 
+	/*
+	 * Only quota files call this without a bh, and they can't be
+	 * refcounted.
+	 */
+	BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL));
+	BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE));
+
 	clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
 	if (clusters_to_add < oi->ip_clusters)
 		clusters_to_add = 0;
@@ -840,7 +1031,7 @@
 	 * still need to zero the area between the old i_size and the
 	 * new i_size.
 	 */
-	ret = ocfs2_zero_extend(inode, zero_to);
+	ret = ocfs2_zero_extend(inode, di_bh, zero_to);
 	if (ret < 0)
 		mlog_errno(ret);
 
@@ -862,27 +1053,15 @@
 		goto out;
 
 	if (i_size_read(inode) == new_i_size)
-  		goto out;
+		goto out;
 	BUG_ON(new_i_size < i_size_read(inode));
 
 	/*
-	 * Fall through for converting inline data, even if the fs
-	 * supports sparse files.
-	 *
-	 * The check for inline data here is legal - nobody can add
-	 * the feature since we have i_mutex. We must check it again
-	 * after acquiring ip_alloc_sem though, as paths like mmap
-	 * might have raced us to converting the inode to extents.
-	 */
-	if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
-	    && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
-		goto out_update_size;
-
-	/*
 	 * The alloc sem blocks people in read/write from reading our
 	 * allocation until we're done changing it. We depend on
 	 * i_mutex to block other extend/truncate calls while we're
-	 * here.
+	 * here.  We even have to hold it for sparse files because there
+	 * might be some tail zeroing.
 	 */
 	down_write(&oi->ip_alloc_sem);
 
@@ -899,14 +1078,16 @@
 		ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
 		if (ret) {
 			up_write(&oi->ip_alloc_sem);
-
 			mlog_errno(ret);
 			goto out;
 		}
 	}
 
-	if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
-		ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
+	if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+		ret = ocfs2_zero_extend(inode, di_bh, new_i_size);
+	else
+		ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size,
+					    new_i_size);
 
 	up_write(&oi->ip_alloc_sem);
 
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index d66cf4f..97bf761 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -54,8 +54,10 @@
 int ocfs2_simple_size_update(struct inode *inode,
 			     struct buffer_head *di_bh,
 			     u64 new_i_size);
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size,
-			  u64 zero_to);
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+			  u64 new_i_size, u64 zero_to);
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+		      loff_t zero_to);
 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
 int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 47878cf..625de9d 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -472,7 +472,7 @@
 	return container_of(triggers, struct ocfs2_triggers, ot_triggers);
 }
 
-static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -491,7 +491,7 @@
  * Quota blocks have their own trigger because the struct ocfs2_block_check
  * offset depends on the blocksize.
  */
-static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_dq_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -511,7 +511,7 @@
  * Directory blocks also have their own trigger because the
  * struct ocfs2_block_check offset depends on the blocksize.
  */
-static void ocfs2_db_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_db_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
 				 struct buffer_head *bh,
 				 void *data, size_t size)
 {
@@ -544,7 +544,7 @@
 
 static struct ocfs2_triggers di_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dinode, i_check),
@@ -552,7 +552,7 @@
 
 static struct ocfs2_triggers eb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_extent_block, h_check),
@@ -560,7 +560,7 @@
 
 static struct ocfs2_triggers rb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_refcount_block, rf_check),
@@ -568,7 +568,7 @@
 
 static struct ocfs2_triggers gd_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_group_desc, bg_check),
@@ -576,14 +576,14 @@
 
 static struct ocfs2_triggers db_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_db_commit_trigger,
+		.t_frozen = ocfs2_db_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 };
 
 static struct ocfs2_triggers xb_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_xattr_block, xb_check),
@@ -591,14 +591,14 @@
 
 static struct ocfs2_triggers dq_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_dq_commit_trigger,
+		.t_frozen = ocfs2_dq_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 };
 
 static struct ocfs2_triggers dr_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dx_root_block, dr_check),
@@ -606,7 +606,7 @@
 
 static struct ocfs2_triggers dl_triggers = {
 	.ot_triggers = {
-		.t_commit = ocfs2_commit_trigger,
+		.t_frozen = ocfs2_frozen_trigger,
 		.t_abort = ocfs2_abort_trigger,
 	},
 	.ot_offset	= offsetof(struct ocfs2_dx_leaf, dl_check),
@@ -1936,7 +1936,7 @@
 	mutex_lock(&os->os_lock);
 	ocfs2_queue_orphan_scan(osb);
 	if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
-		schedule_delayed_work(&os->os_orphan_scan_work,
+		queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
 				      ocfs2_orphan_scan_timeout());
 	mutex_unlock(&os->os_lock);
 }
@@ -1976,8 +1976,8 @@
 		atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
 	else {
 		atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
-		schedule_delayed_work(&os->os_orphan_scan_work,
-				      ocfs2_orphan_scan_timeout());
+		queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
+				   ocfs2_orphan_scan_timeout());
 	}
 }
 
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 3d74196..ec6adbf 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -118,6 +118,7 @@
 {
 	unsigned int la_mb;
 	unsigned int gd_mb;
+	unsigned int la_max_mb;
 	unsigned int megs_per_slot;
 	struct super_block *sb = osb->sb;
 
@@ -182,6 +183,12 @@
 	if (megs_per_slot < la_mb)
 		la_mb = megs_per_slot;
 
+	/* We can't store more bits than we can in a block. */
+	la_max_mb = ocfs2_clusters_to_megabytes(osb->sb,
+						ocfs2_local_alloc_size(sb) * 8);
+	if (la_mb > la_max_mb)
+		la_mb = la_max_mb;
+
 	return la_mb;
 }
 
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 2bb35fe..4607923 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -775,7 +775,7 @@
 		 * locking allocators ranks above a transaction start
 		 */
 		WARN_ON(journal_current_handle());
-		status = ocfs2_extend_no_holes(gqinode,
+		status = ocfs2_extend_no_holes(gqinode, NULL,
 			gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
 			gqinode->i_size);
 		if (status < 0)
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 8bd70d4..dc78764 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -971,7 +971,7 @@
 	u64 p_blkno;
 
 	/* We are protected by dqio_sem so no locking needed */
-	status = ocfs2_extend_no_holes(lqinode,
+	status = ocfs2_extend_no_holes(lqinode, NULL,
 				       lqinode->i_size + 2 * sb->s_blocksize,
 				       lqinode->i_size);
 	if (status < 0) {
@@ -1114,7 +1114,7 @@
 		return ocfs2_local_quota_add_chunk(sb, type, offset);
 
 	/* We are protected by dqio_sem so no locking needed */
-	status = ocfs2_extend_no_holes(lqinode,
+	status = ocfs2_extend_no_holes(lqinode, NULL,
 				       lqinode->i_size + sb->s_blocksize,
 				       lqinode->i_size);
 	if (status < 0) {
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 4793f36..3ac5aa7 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2931,6 +2931,12 @@
 
 	offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits;
 	end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits);
+	/*
+	 * We only duplicate pages until we reach the page contains i_size - 1.
+	 * So trim 'end' to i_size.
+	 */
+	if (end > i_size_read(context->inode))
+		end = i_size_read(context->inode);
 
 	while (offset < end) {
 		page_index = offset >> PAGE_CACHE_SHIFT;
@@ -4166,6 +4172,12 @@
 	struct inode *inode = old_dentry->d_inode;
 	struct buffer_head *new_bh = NULL;
 
+	if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) {
+		ret = -EINVAL;
+		mlog_errno(ret);
+		goto out;
+	}
+
 	ret = filemap_fdatawrite(inode->i_mapping);
 	if (ret) {
 		mlog_errno(ret);
diff --git a/fs/ocfs2/reservations.c b/fs/ocfs2/reservations.c
index 4065002..d8b6e42 100644
--- a/fs/ocfs2/reservations.c
+++ b/fs/ocfs2/reservations.c
@@ -26,7 +26,6 @@
 
 #include <linux/fs.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/bitops.h>
 #include <linux/list.h>
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f4c2a9e..a8e6a95 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -741,7 +741,7 @@
 		     le16_to_cpu(bg->bg_free_bits_count));
 	le32_add_cpu(&cl->cl_recs[alloc_rec].c_total,
 		     le16_to_cpu(bg->bg_bits));
-	cl->cl_recs[alloc_rec].c_blkno  = cpu_to_le64(bg->bg_blkno);
+	cl->cl_recs[alloc_rec].c_blkno = bg->bg_blkno;
 	if (le16_to_cpu(cl->cl_next_free_rec) < le16_to_cpu(cl->cl_count))
 		le16_add_cpu(&cl->cl_next_free_rec, 1);
 
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e97b348..d03469f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -709,7 +709,7 @@
 					 struct ocfs2_xattr_value_buf *vb,
 					 struct ocfs2_xattr_set_ctxt *ctxt)
 {
-	int status = 0;
+	int status = 0, credits;
 	handle_t *handle = ctxt->handle;
 	enum ocfs2_alloc_restarted why;
 	u32 prev_clusters, logical_start = le32_to_cpu(vb->vb_xv->xr_clusters);
@@ -719,39 +719,55 @@
 
 	ocfs2_init_xattr_value_extent_tree(&et, INODE_CACHE(inode), vb);
 
-	status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
-			      OCFS2_JOURNAL_ACCESS_WRITE);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
+	while (clusters_to_add) {
+		status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
+				       OCFS2_JOURNAL_ACCESS_WRITE);
+		if (status < 0) {
+			mlog_errno(status);
+			break;
+		}
+
+		prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
+		status = ocfs2_add_clusters_in_btree(handle,
+						     &et,
+						     &logical_start,
+						     clusters_to_add,
+						     0,
+						     ctxt->data_ac,
+						     ctxt->meta_ac,
+						     &why);
+		if ((status < 0) && (status != -EAGAIN)) {
+			if (status != -ENOSPC)
+				mlog_errno(status);
+			break;
+		}
+
+		ocfs2_journal_dirty(handle, vb->vb_bh);
+
+		clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) -
+					 prev_clusters;
+
+		if (why != RESTART_NONE && clusters_to_add) {
+			/*
+			 * We can only fail in case the alloc file doesn't give
+			 * up enough clusters.
+			 */
+			BUG_ON(why == RESTART_META);
+
+			mlog(0, "restarting xattr value extension for %u"
+			     " clusters,.\n", clusters_to_add);
+			credits = ocfs2_calc_extend_credits(inode->i_sb,
+							    &vb->vb_xv->xr_list,
+							    clusters_to_add);
+			status = ocfs2_extend_trans(handle, credits);
+			if (status < 0) {
+				status = -ENOMEM;
+				mlog_errno(status);
+				break;
+			}
+		}
 	}
 
-	prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
-	status = ocfs2_add_clusters_in_btree(handle,
-					     &et,
-					     &logical_start,
-					     clusters_to_add,
-					     0,
-					     ctxt->data_ac,
-					     ctxt->meta_ac,
-					     &why);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
-
-	ocfs2_journal_dirty(handle, vb->vb_bh);
-
-	clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) - prev_clusters;
-
-	/*
-	 * We should have already allocated enough space before the transaction,
-	 * so no need to restart.
-	 */
-	BUG_ON(why != RESTART_NONE || clusters_to_add);
-
-leave:
-
 	return status;
 }
 
@@ -6788,16 +6804,15 @@
 	return ret;
 }
 
-static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+static int ocfs2_reflink_xattr_bucket(handle_t *handle,
 				u64 blkno, u64 new_blkno, u32 clusters,
+				u32 *cpos, int num_buckets,
 				struct ocfs2_alloc_context *meta_ac,
 				struct ocfs2_alloc_context *data_ac,
 				struct ocfs2_reflink_xattr_tree_args *args)
 {
 	int i, j, ret = 0;
 	struct super_block *sb = args->reflink->old_inode->i_sb;
-	u32 bpc = ocfs2_xattr_buckets_per_cluster(OCFS2_SB(sb));
-	u32 num_buckets = clusters * bpc;
 	int bpb = args->old_bucket->bu_blocks;
 	struct ocfs2_xattr_value_buf vb = {
 		.vb_access = ocfs2_journal_access,
@@ -6816,14 +6831,6 @@
 			break;
 		}
 
-		/*
-		 * The real bucket num in this series of blocks is stored
-		 * in the 1st bucket.
-		 */
-		if (i == 0)
-			num_buckets = le16_to_cpu(
-				bucket_xh(args->old_bucket)->xh_num_buckets);
-
 		ret = ocfs2_xattr_bucket_journal_access(handle,
 						args->new_bucket,
 						OCFS2_JOURNAL_ACCESS_CREATE);
@@ -6837,6 +6844,18 @@
 			       bucket_block(args->old_bucket, j),
 			       sb->s_blocksize);
 
+		/*
+		 * Record the start cpos so that we can use it to initialize
+		 * our xattr tree we also set the xh_num_bucket for the new
+		 * bucket.
+		 */
+		if (i == 0) {
+			*cpos = le32_to_cpu(bucket_xh(args->new_bucket)->
+					    xh_entries[0].xe_name_hash);
+			bucket_xh(args->new_bucket)->xh_num_buckets =
+				cpu_to_le16(num_buckets);
+		}
+
 		ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
 
 		ret = ocfs2_reflink_xattr_header(handle, args->reflink,
@@ -6866,6 +6885,7 @@
 		}
 
 		ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
+
 		ocfs2_xattr_bucket_relse(args->old_bucket);
 		ocfs2_xattr_bucket_relse(args->new_bucket);
 	}
@@ -6874,6 +6894,75 @@
 	ocfs2_xattr_bucket_relse(args->new_bucket);
 	return ret;
 }
+
+static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+				struct inode *inode,
+				struct ocfs2_reflink_xattr_tree_args *args,
+				struct ocfs2_extent_tree *et,
+				struct ocfs2_alloc_context *meta_ac,
+				struct ocfs2_alloc_context *data_ac,
+				u64 blkno, u32 cpos, u32 len)
+{
+	int ret, first_inserted = 0;
+	u32 p_cluster, num_clusters, reflink_cpos = 0;
+	u64 new_blkno;
+	unsigned int num_buckets, reflink_buckets;
+	unsigned int bpc =
+		ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb));
+
+	ret = ocfs2_read_xattr_bucket(args->old_bucket, blkno);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+	num_buckets = le16_to_cpu(bucket_xh(args->old_bucket)->xh_num_buckets);
+	ocfs2_xattr_bucket_relse(args->old_bucket);
+
+	while (len && num_buckets) {
+		ret = ocfs2_claim_clusters(handle, data_ac,
+					   1, &p_cluster, &num_clusters);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
+		new_blkno = ocfs2_clusters_to_blocks(inode->i_sb, p_cluster);
+		reflink_buckets = min(num_buckets, bpc * num_clusters);
+
+		ret = ocfs2_reflink_xattr_bucket(handle, blkno,
+						 new_blkno, num_clusters,
+						 &reflink_cpos, reflink_buckets,
+						 meta_ac, data_ac, args);
+		if (ret) {
+			mlog_errno(ret);
+			goto out;
+		}
+
+		/*
+		 * For the 1st allocated cluster, we make it use the same cpos
+		 * so that the xattr tree looks the same as the original one
+		 * in the most case.
+		 */
+		if (!first_inserted) {
+			reflink_cpos = cpos;
+			first_inserted = 1;
+		}
+		ret = ocfs2_insert_extent(handle, et, reflink_cpos, new_blkno,
+					  num_clusters, 0, meta_ac);
+		if (ret)
+			mlog_errno(ret);
+
+		mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
+		     (unsigned long long)new_blkno, num_clusters, reflink_cpos);
+
+		len -= num_clusters;
+		blkno += ocfs2_clusters_to_blocks(inode->i_sb, num_clusters);
+		num_buckets -= reflink_buckets;
+	}
+out:
+	return ret;
+}
+
 /*
  * Create the same xattr extent record in the new inode's xattr tree.
  */
@@ -6885,8 +6974,6 @@
 				   void *para)
 {
 	int ret, credits = 0;
-	u32 p_cluster, num_clusters;
-	u64 new_blkno;
 	handle_t *handle;
 	struct ocfs2_reflink_xattr_tree_args *args =
 			(struct ocfs2_reflink_xattr_tree_args *)para;
@@ -6895,6 +6982,9 @@
 	struct ocfs2_alloc_context *data_ac = NULL;
 	struct ocfs2_extent_tree et;
 
+	mlog(0, "reflink xattr buckets %llu len %u\n",
+	     (unsigned long long)blkno, len);
+
 	ocfs2_init_xattr_tree_extent_tree(&et,
 					  INODE_CACHE(args->reflink->new_inode),
 					  args->new_blk_bh);
@@ -6914,32 +7004,12 @@
 		goto out;
 	}
 
-	ret = ocfs2_claim_clusters(handle, data_ac,
-				   len, &p_cluster, &num_clusters);
-	if (ret) {
-		mlog_errno(ret);
-		goto out_commit;
-	}
-
-	new_blkno = ocfs2_clusters_to_blocks(osb->sb, p_cluster);
-
-	mlog(0, "reflink xattr buckets %llu to %llu, len %u\n",
-	     (unsigned long long)blkno, (unsigned long long)new_blkno, len);
-	ret = ocfs2_reflink_xattr_buckets(handle, blkno, new_blkno, len,
-					  meta_ac, data_ac, args);
-	if (ret) {
-		mlog_errno(ret);
-		goto out_commit;
-	}
-
-	mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
-	     (unsigned long long)new_blkno, len, cpos);
-	ret = ocfs2_insert_extent(handle, &et, cpos, new_blkno,
-				  len, 0, meta_ac);
+	ret = ocfs2_reflink_xattr_buckets(handle, inode, args, &et,
+					  meta_ac, data_ac,
+					  blkno, cpos, len);
 	if (ret)
 		mlog_errno(ret);
 
-out_commit:
 	ocfs2_commit_trans(osb, handle);
 
 out:
diff --git a/fs/open.c b/fs/open.c
index 5463266..0d1fa3d 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -110,7 +110,7 @@
 
 	error = locks_verify_truncate(inode, NULL, length);
 	if (!error)
-		error = security_path_truncate(&path, length, 0);
+		error = security_path_truncate(&path);
 	if (!error)
 		error = do_truncate(path.dentry, length, 0, NULL);
 
@@ -165,8 +165,7 @@
 
 	error = locks_verify_truncate(inode, file, length);
 	if (!error)
-		error = security_path_truncate(&file->f_path, length,
-					       ATTR_MTIME|ATTR_CTIME);
+		error = security_path_truncate(&file->f_path);
 	if (!error)
 		error = do_truncate(dentry, length, ATTR_MTIME|ATTR_CTIME, file);
 out_putf:
@@ -367,7 +366,7 @@
 	if (error)
 		goto out;
 
-	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_CHDIR);
 	if (error)
 		goto dput_and_out;
 
@@ -396,7 +395,7 @@
 	if (!S_ISDIR(inode->i_mode))
 		goto out_putf;
 
-	error = inode_permission(inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(inode, MAY_EXEC | MAY_CHDIR);
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
@@ -414,7 +413,7 @@
 	if (error)
 		goto out;
 
-	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_CHDIR);
 	if (error)
 		goto dput_and_out;
 
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 3e73de5..fc84976 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -74,6 +74,7 @@
 	} *label;
 	unsigned char *data;
 	Sector sect;
+	sector_t labelsect;
 
 	res = 0;
 	blocksize = bdev_logical_block_size(bdev);
@@ -98,10 +99,19 @@
 		goto out_freeall;
 
 	/*
+	 * Special case for FBA disks: label sector does not depend on
+	 * blocksize.
+	 */
+	if ((info->cu_type == 0x6310 && info->dev_type == 0x9336) ||
+	    (info->cu_type == 0x3880 && info->dev_type == 0x3370))
+		labelsect = info->label_block;
+	else
+		labelsect = info->label_block * (blocksize >> 9);
+
+	/*
 	 * Get volume label, extract name and type.
 	 */
-	data = read_part_sector(state, info->label_block*(blocksize/512),
-				&sect);
+	data = read_part_sector(state, labelsect, &sect);
 	if (data == NULL)
 		goto out_readerr;
 
diff --git a/fs/pipe.c b/fs/pipe.c
index db6eaab..279eef9 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -26,9 +26,14 @@
 
 /*
  * The max size that a non-root user is allowed to grow the pipe. Can
- * be set by root in /proc/sys/fs/pipe-max-pages
+ * be set by root in /proc/sys/fs/pipe-max-size
  */
-unsigned int pipe_max_pages = PIPE_DEF_BUFFERS * 16;
+unsigned int pipe_max_size = 1048576;
+
+/*
+ * Minimum pipe size, as required by POSIX
+ */
+unsigned int pipe_min_size = PAGE_SIZE;
 
 /*
  * We use a start+len construction, which provides full use of the 
@@ -1118,26 +1123,20 @@
  * Allocate a new array of pipe buffers and copy the info over. Returns the
  * pipe size if successful, or return -ERROR on error.
  */
-static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long arg)
+static long pipe_set_size(struct pipe_inode_info *pipe, unsigned long nr_pages)
 {
 	struct pipe_buffer *bufs;
 
 	/*
-	 * Must be a power-of-2 currently
-	 */
-	if (!is_power_of_2(arg))
-		return -EINVAL;
-
-	/*
 	 * We can shrink the pipe, if arg >= pipe->nrbufs. Since we don't
 	 * expect a lot of shrink+grow operations, just free and allocate
 	 * again like we would do for growing. If the pipe currently
 	 * contains more buffers than arg, then return busy.
 	 */
-	if (arg < pipe->nrbufs)
+	if (nr_pages < pipe->nrbufs)
 		return -EBUSY;
 
-	bufs = kcalloc(arg, sizeof(struct pipe_buffer), GFP_KERNEL);
+	bufs = kcalloc(nr_pages, sizeof(struct pipe_buffer), GFP_KERNEL);
 	if (unlikely(!bufs))
 		return -ENOMEM;
 
@@ -1146,20 +1145,56 @@
 	 * and adjust the indexes.
 	 */
 	if (pipe->nrbufs) {
-		const unsigned int tail = pipe->nrbufs & (pipe->buffers - 1);
-		const unsigned int head = pipe->nrbufs - tail;
+		unsigned int tail;
+		unsigned int head;
 
+		tail = pipe->curbuf + pipe->nrbufs;
+		if (tail < pipe->buffers)
+			tail = 0;
+		else
+			tail &= (pipe->buffers - 1);
+
+		head = pipe->nrbufs - tail;
 		if (head)
 			memcpy(bufs, pipe->bufs + pipe->curbuf, head * sizeof(struct pipe_buffer));
 		if (tail)
-			memcpy(bufs + head, pipe->bufs + pipe->curbuf, tail * sizeof(struct pipe_buffer));
+			memcpy(bufs + head, pipe->bufs, tail * sizeof(struct pipe_buffer));
 	}
 
 	pipe->curbuf = 0;
 	kfree(pipe->bufs);
 	pipe->bufs = bufs;
-	pipe->buffers = arg;
-	return arg;
+	pipe->buffers = nr_pages;
+	return nr_pages * PAGE_SIZE;
+}
+
+/*
+ * Currently we rely on the pipe array holding a power-of-2 number
+ * of pages.
+ */
+static inline unsigned int round_pipe_size(unsigned int size)
+{
+	unsigned long nr_pages;
+
+	nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	return roundup_pow_of_two(nr_pages) << PAGE_SHIFT;
+}
+
+/*
+ * This should work even if CONFIG_PROC_FS isn't set, as proc_dointvec_minmax
+ * will return an error.
+ */
+int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
+		 size_t *lenp, loff_t *ppos)
+{
+	int ret;
+
+	ret = proc_dointvec_minmax(table, write, buf, lenp, ppos);
+	if (ret < 0 || !write)
+		return ret;
+
+	pipe_max_size = round_pipe_size(pipe_max_size);
+	return ret;
 }
 
 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -1174,23 +1209,25 @@
 	mutex_lock(&pipe->inode->i_mutex);
 
 	switch (cmd) {
-	case F_SETPIPE_SZ:
-		if (!capable(CAP_SYS_ADMIN) && arg > pipe_max_pages) {
-			ret = -EINVAL;
+	case F_SETPIPE_SZ: {
+		unsigned int size, nr_pages;
+
+		size = round_pipe_size(arg);
+		nr_pages = size >> PAGE_SHIFT;
+
+		ret = -EINVAL;
+		if (!nr_pages)
+			goto out;
+
+		if (!capable(CAP_SYS_RESOURCE) && size > pipe_max_size) {
+			ret = -EPERM;
 			goto out;
 		}
-		/*
-		 * The pipe needs to be at least 2 pages large to
-		 * guarantee POSIX behaviour.
-		 */
-		if (arg < 2) {
-			ret = -EINVAL;
-			goto out;
-		}
-		ret = pipe_set_size(pipe, arg);
+		ret = pipe_set_size(pipe, nr_pages);
 		break;
+		}
 	case F_GETPIPE_SZ:
-		ret = pipe->buffers;
+		ret = pipe->buffers * PAGE_SIZE;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 9b58d38..fff6572 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -176,7 +176,7 @@
 		if (tracer)
 			tpid = task_pid_nr_ns(tracer, ns);
 	}
-	cred = get_cred((struct cred *) __task_cred(p));
+	cred = get_task_cred(p);
 	seq_printf(m,
 		"State:\t%s\n"
 		"Tgid:\t%d\n"
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index ce94801..d9396a4 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -209,6 +209,9 @@
 	for (pp = np->properties; pp != NULL; pp = pp->next) {
 		p = pp->name;
 
+		if (strchr(p, '/'))
+			continue;
+
 		if (duplicate_name(de, p))
 			p = fixup_name(np, de, p);
 
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 46d4b5d..cb6306e 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -122,11 +122,20 @@
 	return size;
 }
 
+static void pad_len_spaces(struct seq_file *m, int len)
+{
+	len = 25 + sizeof(void*) * 6 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c", len, ' ');
+}
+
 /*
  * display a single VMA to a sequenced file
  */
 static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 {
+	struct mm_struct *mm = vma->vm_mm;
 	unsigned long ino = 0;
 	struct file *file;
 	dev_t dev = 0;
@@ -155,11 +164,14 @@
 		   MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (file) {
-		len = 25 + sizeof(void *) * 6 - len;
-		if (len < 1)
-			len = 1;
-		seq_printf(m, "%*c", len, ' ');
+		pad_len_spaces(m, len);
 		seq_path(m, &file->f_path, "");
+	} else if (mm) {
+		if (vma->vm_start <= mm->start_stack &&
+			vma->vm_end >= mm->start_stack) {
+			pad_len_spaces(m, len);
+			seq_puts(m, "[stack]");
+		}
 	}
 
 	seq_putc(m, '\n');
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 12c233d..437d2ca 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -676,7 +676,7 @@
  * This is called from kswapd when we think we need some
  * more memory
  */
-static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dqcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	if (nr) {
 		spin_lock(&dq_list_lock);
diff --git a/fs/splice.c b/fs/splice.c
index ac22b00..efdbfec 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -354,7 +354,7 @@
 				break;
 
 			error = add_to_page_cache_lru(page, mapping, index,
-						mapping_gfp_mask(mapping));
+						GFP_KERNEL);
 			if (unlikely(error)) {
 				page_cache_release(page);
 				if (error == -EEXIST)
@@ -1282,7 +1282,8 @@
 {
 	struct file *file = sd->u.file;
 
-	return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
+	return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
+			      sd->flags);
 }
 
 /**
@@ -1371,8 +1372,7 @@
 		if (off_in)
 			return -ESPIPE;
 		if (off_out) {
-			if (!out->f_op || !out->f_op->llseek ||
-			    out->f_op->llseek == no_llseek)
+			if (!(out->f_mode & FMODE_PWRITE))
 				return -EINVAL;
 			if (copy_from_user(&offset, off_out, sizeof(loff_t)))
 				return -EFAULT;
@@ -1392,8 +1392,7 @@
 		if (off_out)
 			return -ESPIPE;
 		if (off_in) {
-			if (!in->f_op || !in->f_op->llseek ||
-			    in->f_op->llseek == no_llseek)
+			if (!(in->f_mode & FMODE_PREAD))
 				return -EINVAL;
 			if (copy_from_user(&offset, off_in, sizeof(loff_t)))
 				return -EFAULT;
diff --git a/fs/super.c b/fs/super.c
index 5c35bc7..938119a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -374,6 +374,8 @@
 			up_read(&sb->s_umount);
 
 			spin_lock(&sb_lock);
+			/* lock was dropped, must reset next */
+			list_safe_reset_next(sb, n, s_list);
 			__put_super(sb);
 		}
 	}
@@ -405,6 +407,8 @@
 		up_read(&sb->s_umount);
 
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		__put_super(sb);
 	}
 	spin_unlock(&sb_lock);
@@ -585,6 +589,8 @@
 		}
 		up_write(&sb->s_umount);
 		spin_lock(&sb_lock);
+		/* lock was dropped, must reset next */
+		list_safe_reset_next(sb, n, s_list);
 		__put_super(sb);
 	}
 	spin_unlock(&sb_lock);
diff --git a/fs/sync.c b/fs/sync.c
index c9f83f4..15aa6f0 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -42,7 +42,7 @@
 	if (wait)
 		sync_inodes_sb(sb);
 	else
-		writeback_inodes_sb_locked(sb);
+		writeback_inodes_sb(sb);
 
 	if (sb->s_op->sync_fs)
 		sb->s_op->sync_fs(sb, wait);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index bde1a4c..0835a3b 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -117,11 +117,13 @@
 	if (error)
 		goto out;
 
+	error = sysfs_sd_setattr(sd, iattr);
+	if (error)
+		goto out;
+
 	/* this ignores size changes */
 	generic_setattr(inode, iattr);
 
-	error = sysfs_sd_setattr(sd, iattr);
-
 out:
 	mutex_unlock(&sysfs_mutex);
 	return error;
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index f71246b..a7ac78f 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -28,6 +28,7 @@
 	struct sysfs_dirent *target_sd = NULL;
 	struct sysfs_dirent *sd = NULL;
 	struct sysfs_addrm_cxt acxt;
+	enum kobj_ns_type ns_type;
 	int error;
 
 	BUG_ON(!name);
@@ -58,16 +59,29 @@
 	if (!sd)
 		goto out_put;
 
-	if (sysfs_ns_type(parent_sd))
+	ns_type = sysfs_ns_type(parent_sd);
+	if (ns_type)
 		sd->s_ns = target->ktype->namespace(target);
 	sd->s_symlink.target_sd = target_sd;
 	target_sd = NULL;	/* reference is now owned by the symlink */
 
 	sysfs_addrm_start(&acxt, parent_sd);
-	if (warn)
-		error = sysfs_add_one(&acxt, sd);
-	else
-		error = __sysfs_add_one(&acxt, sd);
+	/* Symlinks must be between directories with the same ns_type */
+	if (!ns_type ||
+	    (ns_type == sysfs_ns_type(sd->s_symlink.target_sd->s_parent))) {
+		if (warn)
+			error = sysfs_add_one(&acxt, sd);
+		else
+			error = __sysfs_add_one(&acxt, sd);
+	} else {
+		error = -EINVAL;
+		WARN(1, KERN_WARNING
+			"sysfs: symlink across ns_types %s/%s -> %s/%s\n",
+			parent_sd->s_name,
+			sd->s_name,
+			sd->s_symlink.target_sd->s_parent->s_name,
+			sd->s_symlink.target_sd->s_name);
+	}
 	sysfs_addrm_finish(&acxt);
 
 	if (error)
@@ -122,7 +136,7 @@
 {
 	const void *ns = NULL;
 	spin_lock(&sysfs_assoc_lock);
-	if (targ->sd)
+	if (targ->sd && sysfs_ns_type(kobj->sd))
 		ns = targ->sd->s_ns;
 	spin_unlock(&sysfs_assoc_lock);
 	sysfs_hash_and_remove(kobj->sd, ns, name);
diff --git a/fs/sysv/ialloc.c b/fs/sysv/ialloc.c
index bbd69bd..fcc498e 100644
--- a/fs/sysv/ialloc.c
+++ b/fs/sysv/ialloc.c
@@ -25,6 +25,7 @@
 #include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/buffer_head.h>
+#include <linux/writeback.h>
 #include "sysv.h"
 
 /* We don't trust the value of
@@ -139,6 +140,9 @@
 	struct inode *inode;
 	sysv_ino_t ino;
 	unsigned count;
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_NONE
+	};
 
 	inode = new_inode(sb);
 	if (!inode)
@@ -168,7 +172,7 @@
 	insert_inode_hash(inode);
 	mark_inode_dirty(inode);
 
-	sysv_write_inode(inode, 0);	/* ensure inode not allocated again */
+	sysv_write_inode(inode, &wbc);	/* ensure inode not allocated again */
 	mark_inode_dirty(inode);	/* cleared by sysv_write_inode() */
 	/* That's it. */
 	unlock_super(sb);
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 076ca50..c8ff0d1 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -62,7 +62,9 @@
  */
 static void shrink_liability(struct ubifs_info *c, int nr_to_write)
 {
+	down_read(&c->vfs_sb->s_umount);
 	writeback_inodes_sb(c->vfs_sb);
+	up_read(&c->vfs_sb->s_umount);
 }
 
 /**
diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c
index ad7f67b..0084a33 100644
--- a/fs/ubifs/lpt.c
+++ b/fs/ubifs/lpt.c
@@ -1457,13 +1457,13 @@
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
@@ -1586,7 +1586,7 @@
 	nnode = c->nroot;
 	nnode = dirty_cow_nnode(c, nnode);
 	if (IS_ERR(nnode))
-		return ERR_PTR(PTR_ERR(nnode));
+		return ERR_CAST(nnode);
 	i = lnum - c->main_first;
 	shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT;
 	for (h = 1; h < c->lpt_hght; h++) {
@@ -1594,19 +1594,19 @@
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 		nnode = dirty_cow_nnode(c, nnode);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	shft -= UBIFS_LPT_FANOUT_SHIFT;
 	pnode = ubifs_get_pnode(c, nnode, iip);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	pnode = dirty_cow_pnode(c, pnode);
 	if (IS_ERR(pnode))
-		return ERR_PTR(PTR_ERR(pnode));
+		return ERR_CAST(pnode);
 	iip = (i & (UBIFS_LPT_FANOUT - 1));
 	dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum,
 	       pnode->lprops[iip].free, pnode->lprops[iip].dirty,
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index 13cb7a4..d12535b 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -646,7 +646,7 @@
 		shft -= UBIFS_LPT_FANOUT_SHIFT;
 		nnode = ubifs_get_nnode(c, nnode, iip);
 		if (IS_ERR(nnode))
-			return ERR_PTR(PTR_ERR(nnode));
+			return ERR_CAST(nnode);
 	}
 	iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1));
 	return ubifs_get_pnode(c, nnode, iip);
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 109c6ea..daae9e1 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -24,7 +24,7 @@
  * This file implements functions needed to recover from unclean un-mounts.
  * When UBIFS is mounted, it checks a flag on the master node to determine if
  * an un-mount was completed successfully. If not, the process of mounting
- * incorparates additional checking and fixing of on-flash data structures.
+ * incorporates additional checking and fixing of on-flash data structures.
  * UBIFS always cleans away all remnants of an unclean un-mount, so that
  * errors do not accumulate. However UBIFS defers recovery if it is mounted
  * read-only, and the flash is not modified in that case.
@@ -1063,8 +1063,21 @@
 	}
 	err = ubifs_find_dirty_leb(c, &lp, wbuf->offs, 2);
 	if (err) {
-		if (err == -ENOSPC)
-			dbg_err("could not find a dirty LEB");
+		/*
+		 * There are no dirty or empty LEBs subject to here being
+		 * enough for the index. Try to use
+		 * 'ubifs_find_free_leb_for_idx()', which will return any empty
+		 * LEBs (ignoring index requirements). If the index then
+		 * doesn't have enough LEBs the recovery commit will fail -
+		 * which is the  same result anyway i.e. recovery fails. So
+		 * there is no problem ignoring index  requirements and just
+		 * grabbing a free LEB since we have already established there
+		 * is not a dirty LEB we could have used instead.
+		 */
+		if (err == -ENOSPC) {
+			dbg_rcvry("could not find a dirty LEB");
+			goto find_free;
+		}
 		return err;
 	}
 	ubifs_assert(!(lp.flags & LPROPS_INDEX));
@@ -1139,8 +1152,8 @@
 find_free:
 	/*
 	 * There is no GC head LEB or the free space in the GC head LEB is too
-	 * small. Allocate gc_lnum by calling 'ubifs_find_free_leb_for_idx()' so
-	 * GC is not run.
+	 * small, or there are not dirty LEBs. Allocate gc_lnum by calling
+	 * 'ubifs_find_free_leb_for_idx()' so GC is not run.
 	 */
 	lnum = ubifs_find_free_leb_for_idx(c);
 	if (lnum < 0) {
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index 02feb59..0b20111 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -277,7 +277,7 @@
 	return 0;
 }
 
-int ubifs_shrinker(int nr, gfp_t gfp_mask)
+int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
 	int freed, contention = 0;
 	long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 4d2f215..5fc5a09 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1307,6 +1307,8 @@
 			if (err)
 				goto out_orphans;
 			err = ubifs_rcvry_gc_commit(c);
+			if (err)
+				goto out_orphans;
 		} else {
 			err = take_gc_lnum(c);
 			if (err)
@@ -1318,7 +1320,7 @@
 			 */
 			err = ubifs_leb_unmap(c, c->gc_lnum);
 			if (err)
-				return err;
+				goto out_orphans;
 		}
 
 		err = dbg_check_lprops(c);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 2eef553..0431087 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1575,7 +1575,7 @@
 int ubifs_tnc_end_commit(struct ubifs_info *c);
 
 /* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
 
 /* commit.c */
 int ubifs_bg_thread(void *info);
diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile
index c8fb13f..0dce969 100644
--- a/fs/xfs/Makefile
+++ b/fs/xfs/Makefile
@@ -87,11 +87,9 @@
 				   xfs_trans_buf.o \
 				   xfs_trans_extfree.o \
 				   xfs_trans_inode.o \
-				   xfs_trans_item.o \
 				   xfs_utils.o \
 				   xfs_vnodeops.o \
-				   xfs_rw.o \
-				   xfs_dmops.o
+				   xfs_rw.o
 
 xfs-$(CONFIG_XFS_TRACE)		+= xfs_btree_trace.o
 
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 9f769b5..b277186 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -225,7 +225,7 @@
 	struct posix_acl *acl;
 	int error = -EAGAIN;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_check_acl(ip);
 
 	/*
 	 * If there is no attribute fork no ACL exists on this inode and
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 089eaca..d24e78f 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -21,19 +21,12 @@
 #include "xfs_inum.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_trans.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_error.h"
 #include "xfs_rw.h"
 #include "xfs_iomap.h"
@@ -92,18 +85,15 @@
 xfs_count_page_state(
 	struct page		*page,
 	int			*delalloc,
-	int			*unmapped,
 	int			*unwritten)
 {
 	struct buffer_head	*bh, *head;
 
-	*delalloc = *unmapped = *unwritten = 0;
+	*delalloc = *unwritten = 0;
 
 	bh = head = page_buffers(page);
 	do {
-		if (buffer_uptodate(bh) && !buffer_mapped(bh))
-			(*unmapped) = 1;
-		else if (buffer_unwritten(bh))
+		if (buffer_unwritten(bh))
 			(*unwritten) = 1;
 		else if (buffer_delay(bh))
 			(*delalloc) = 1;
@@ -212,23 +202,17 @@
 }
 
 /*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
+ * Schedule IO completion handling on the final put of an ioend.
  */
 STATIC void
 xfs_finish_ioend(
-	xfs_ioend_t	*ioend,
-	int		wait)
+	struct xfs_ioend	*ioend)
 {
 	if (atomic_dec_and_test(&ioend->io_remaining)) {
-		struct workqueue_struct *wq;
-
-		wq = (ioend->io_type == IO_UNWRITTEN) ?
-			xfsconvertd_workqueue : xfsdatad_workqueue;
-		queue_work(wq, &ioend->io_work);
-		if (wait)
-			flush_workqueue(wq);
+		if (ioend->io_type == IO_UNWRITTEN)
+			queue_work(xfsconvertd_workqueue, &ioend->io_work);
+		else
+			queue_work(xfsdatad_workqueue, &ioend->io_work);
 	}
 }
 
@@ -272,11 +256,25 @@
 	 */
 	if (error == EAGAIN) {
 		atomic_inc(&ioend->io_remaining);
-		xfs_finish_ioend(ioend, 0);
+		xfs_finish_ioend(ioend);
 		/* ensure we don't spin on blocked ioends */
 		delay(1);
-	} else
+	} else {
+		if (ioend->io_iocb)
+			aio_complete(ioend->io_iocb, ioend->io_result, 0);
 		xfs_destroy_ioend(ioend);
+	}
+}
+
+/*
+ * Call IO completion handling in caller context on the final put of an ioend.
+ */
+STATIC void
+xfs_finish_ioend_sync(
+	struct xfs_ioend	*ioend)
+{
+	if (atomic_dec_and_test(&ioend->io_remaining))
+		xfs_end_io(&ioend->io_work);
 }
 
 /*
@@ -309,6 +307,8 @@
 	atomic_inc(&XFS_I(ioend->io_inode)->i_iocount);
 	ioend->io_offset = 0;
 	ioend->io_size = 0;
+	ioend->io_iocb = NULL;
+	ioend->io_result = 0;
 
 	INIT_WORK(&ioend->io_work, xfs_end_io);
 	return ioend;
@@ -358,7 +358,7 @@
 	bio->bi_end_io = NULL;
 	bio_put(bio);
 
-	xfs_finish_ioend(ioend, 0);
+	xfs_finish_ioend(ioend);
 }
 
 STATIC void
@@ -500,7 +500,7 @@
 		}
 		if (bio)
 			xfs_submit_ioend_bio(wbc, ioend, bio);
-		xfs_finish_ioend(ioend, 0);
+		xfs_finish_ioend(ioend);
 	} while ((ioend = next) != NULL);
 }
 
@@ -614,31 +614,30 @@
 STATIC unsigned int
 xfs_probe_page(
 	struct page		*page,
-	unsigned int		pg_offset,
-	int			mapped)
+	unsigned int		pg_offset)
 {
+	struct buffer_head	*bh, *head;
 	int			ret = 0;
 
 	if (PageWriteback(page))
 		return 0;
+	if (!PageDirty(page))
+		return 0;
+	if (!page->mapping)
+		return 0;
+	if (!page_has_buffers(page))
+		return 0;
 
-	if (page->mapping && PageDirty(page)) {
-		if (page_has_buffers(page)) {
-			struct buffer_head	*bh, *head;
-
-			bh = head = page_buffers(page);
-			do {
-				if (!buffer_uptodate(bh))
-					break;
-				if (mapped != buffer_mapped(bh))
-					break;
-				ret += bh->b_size;
-				if (ret >= pg_offset)
-					break;
-			} while ((bh = bh->b_this_page) != head);
-		} else
-			ret = mapped ? 0 : PAGE_CACHE_SIZE;
-	}
+	bh = head = page_buffers(page);
+	do {
+		if (!buffer_uptodate(bh))
+			break;
+		if (!buffer_mapped(bh))
+			break;
+		ret += bh->b_size;
+		if (ret >= pg_offset)
+			break;
+	} while ((bh = bh->b_this_page) != head);
 
 	return ret;
 }
@@ -648,8 +647,7 @@
 	struct inode		*inode,
 	struct page		*startpage,
 	struct buffer_head	*bh,
-	struct buffer_head	*head,
-	int			mapped)
+	struct buffer_head	*head)
 {
 	struct pagevec		pvec;
 	pgoff_t			tindex, tlast, tloff;
@@ -658,7 +656,7 @@
 
 	/* First sum forwards in this page */
 	do {
-		if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
+		if (!buffer_uptodate(bh) || !buffer_mapped(bh))
 			return total;
 		total += bh->b_size;
 	} while ((bh = bh->b_this_page) != head);
@@ -692,7 +690,7 @@
 				pg_offset = PAGE_CACHE_SIZE;
 
 			if (page->index == tindex && trylock_page(page)) {
-				pg_len = xfs_probe_page(page, pg_offset, mapped);
+				pg_len = xfs_probe_page(page, pg_offset);
 				unlock_page(page);
 			}
 
@@ -761,7 +759,6 @@
 	struct xfs_bmbt_irec	*imap,
 	xfs_ioend_t		**ioendp,
 	struct writeback_control *wbc,
-	int			startio,
 	int			all_bh)
 {
 	struct buffer_head	*bh, *head;
@@ -832,19 +829,14 @@
 			ASSERT(imap->br_startblock != DELAYSTARTBLOCK);
 
 			xfs_map_at_offset(inode, bh, imap, offset);
-			if (startio) {
-				xfs_add_to_ioend(inode, bh, offset,
-						type, ioendp, done);
-			} else {
-				set_buffer_dirty(bh);
-				unlock_buffer(bh);
-				mark_buffer_dirty(bh);
-			}
+			xfs_add_to_ioend(inode, bh, offset, type,
+					 ioendp, done);
+
 			page_dirty--;
 			count++;
 		} else {
 			type = IO_NEW;
-			if (buffer_mapped(bh) && all_bh && startio) {
+			if (buffer_mapped(bh) && all_bh) {
 				lock_buffer(bh);
 				xfs_add_to_ioend(inode, bh, offset,
 						type, ioendp, done);
@@ -859,14 +851,12 @@
 	if (uptodate && bh == head)
 		SetPageUptodate(page);
 
-	if (startio) {
-		if (count) {
-			wbc->nr_to_write--;
-			if (wbc->nr_to_write <= 0)
-				done = 1;
-		}
-		xfs_start_page_writeback(page, !page_dirty, count);
+	if (count) {
+		wbc->nr_to_write--;
+		if (wbc->nr_to_write <= 0)
+			done = 1;
 	}
+	xfs_start_page_writeback(page, !page_dirty, count);
 
 	return done;
  fail_unlock_page:
@@ -886,7 +876,6 @@
 	struct xfs_bmbt_irec	*imap,
 	xfs_ioend_t		**ioendp,
 	struct writeback_control *wbc,
-	int			startio,
 	int			all_bh,
 	pgoff_t			tlast)
 {
@@ -902,7 +891,7 @@
 
 		for (i = 0; i < pagevec_count(&pvec); i++) {
 			done = xfs_convert_page(inode, pvec.pages[i], tindex++,
-					imap, ioendp, wbc, startio, all_bh);
+					imap, ioendp, wbc, all_bh);
 			if (done)
 				break;
 		}
@@ -981,7 +970,7 @@
 		 */
 		error = xfs_bmapi(NULL, ip, offset_fsb, 1,
 				XFS_BMAPI_ENTIRE,  NULL, 0, &imap,
-				&nimaps, NULL, NULL);
+				&nimaps, NULL);
 
 		if (error) {
 			/* something screwed, just bail */
@@ -1009,7 +998,7 @@
 		 */
 		xfs_bmap_init(&flist, &firstblock);
 		error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
-					&flist, NULL, &done);
+					&flist, &done);
 
 		ASSERT(!flist.xbf_count && !flist.xbf_first);
 		if (error) {
@@ -1032,50 +1021,66 @@
 }
 
 /*
- * Calling this without startio set means we are being asked to make a dirty
- * page ready for freeing it's buffers.  When called with startio set then
- * we are coming from writepage.
+ * Write out a dirty page.
  *
- * When called with startio set it is important that we write the WHOLE
- * page if possible.
- * The bh->b_state's cannot know if any of the blocks or which block for
- * that matter are dirty due to mmap writes, and therefore bh uptodate is
- * only valid if the page itself isn't completely uptodate.  Some layers
- * may clear the page dirty flag prior to calling write page, under the
- * assumption the entire page will be written out; by not writing out the
- * whole page the page can be reused before all valid dirty data is
- * written out.  Note: in the case of a page that has been dirty'd by
- * mapwrite and but partially setup by block_prepare_write the
- * bh->b_states's will not agree and only ones setup by BPW/BCW will have
- * valid state, thus the whole page must be written out thing.
+ * For delalloc space on the page we need to allocate space and flush it.
+ * For unwritten space on the page we need to start the conversion to
+ * regular allocated space.
+ * For any other dirty buffer heads on the page we should flush them.
+ *
+ * If we detect that a transaction would be required to flush the page, we
+ * have to check the process flags first, if we are already in a transaction
+ * or disk I/O during allocations is off, we need to fail the writepage and
+ * redirty the page.
  */
-
 STATIC int
-xfs_page_state_convert(
-	struct inode	*inode,
-	struct page	*page,
-	struct writeback_control *wbc,
-	int		startio,
-	int		unmapped) /* also implies page uptodate */
+xfs_vm_writepage(
+	struct page		*page,
+	struct writeback_control *wbc)
 {
+	struct inode		*inode = page->mapping->host;
+	int			delalloc, unwritten;
 	struct buffer_head	*bh, *head;
 	struct xfs_bmbt_irec	imap;
 	xfs_ioend_t		*ioend = NULL, *iohead = NULL;
 	loff_t			offset;
-	unsigned long           p_offset = 0;
 	unsigned int		type;
 	__uint64_t              end_offset;
 	pgoff_t                 end_index, last_index;
 	ssize_t			size, len;
 	int			flags, err, imap_valid = 0, uptodate = 1;
-	int			page_dirty, count = 0;
-	int			trylock = 0;
-	int			all_bh = unmapped;
+	int			count = 0;
+	int			all_bh = 0;
 
-	if (startio) {
-		if (wbc->sync_mode == WB_SYNC_NONE && wbc->nonblocking)
-			trylock |= BMAPI_TRYLOCK;
-	}
+	trace_xfs_writepage(inode, page, 0);
+
+	ASSERT(page_has_buffers(page));
+
+	/*
+	 * Refuse to write the page out if we are called from reclaim context.
+	 *
+	 * This avoids stack overflows when called from deeply used stacks in
+	 * random callers for direct reclaim or memcg reclaim.  We explicitly
+	 * allow reclaim from kswapd as the stack usage there is relatively low.
+	 *
+	 * This should really be done by the core VM, but until that happens
+	 * filesystems like XFS, btrfs and ext4 have to take care of this
+	 * by themselves.
+	 */
+	if ((current->flags & (PF_MEMALLOC|PF_KSWAPD)) == PF_MEMALLOC)
+		goto out_fail;
+
+	/*
+	 * We need a transaction if there are delalloc or unwritten buffers
+	 * on the page.
+	 *
+	 * If we need a transaction and the process flags say we are already
+	 * in a transaction, or no IO is allowed then mark the page dirty
+	 * again and leave the page as is.
+	 */
+	xfs_count_page_state(page, &delalloc, &unwritten);
+	if ((current->flags & PF_FSTRANS) && (delalloc || unwritten))
+		goto out_fail;
 
 	/* Is this page beyond the end of the file? */
 	offset = i_size_read(inode);
@@ -1084,50 +1089,33 @@
 	if (page->index >= end_index) {
 		if ((page->index >= end_index + 1) ||
 		    !(i_size_read(inode) & (PAGE_CACHE_SIZE - 1))) {
-			if (startio)
-				unlock_page(page);
+			unlock_page(page);
 			return 0;
 		}
 	}
 
-	/*
-	 * page_dirty is initially a count of buffers on the page before
-	 * EOF and is decremented as we move each into a cleanable state.
-	 *
-	 * Derivation:
-	 *
-	 * End offset is the highest offset that this page should represent.
-	 * If we are on the last page, (end_offset & (PAGE_CACHE_SIZE - 1))
-	 * will evaluate non-zero and be less than PAGE_CACHE_SIZE and
-	 * hence give us the correct page_dirty count. On any other page,
-	 * it will be zero and in that case we need page_dirty to be the
-	 * count of buffers on the page.
- 	 */
 	end_offset = min_t(unsigned long long,
-			(xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT, offset);
+			(xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT,
+			offset);
 	len = 1 << inode->i_blkbits;
-	p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1),
-					PAGE_CACHE_SIZE);
-	p_offset = p_offset ? roundup(p_offset, len) : PAGE_CACHE_SIZE;
-	page_dirty = p_offset / len;
 
 	bh = head = page_buffers(page);
 	offset = page_offset(page);
 	flags = BMAPI_READ;
 	type = IO_NEW;
 
-	/* TODO: cleanup count and page_dirty */
-
 	do {
 		if (offset >= end_offset)
 			break;
 		if (!buffer_uptodate(bh))
 			uptodate = 0;
-		if (!(PageUptodate(page) || buffer_uptodate(bh)) && !startio) {
-			/*
-			 * the iomap is actually still valid, but the ioend
-			 * isn't.  shouldn't happen too often.
-			 */
+
+		/*
+		 * A hole may still be marked uptodate because discard_buffer
+		 * leaves the flag set.
+		 */
+		if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
+			ASSERT(!buffer_dirty(bh));
 			imap_valid = 0;
 			continue;
 		}
@@ -1135,19 +1123,7 @@
 		if (imap_valid)
 			imap_valid = xfs_imap_valid(inode, &imap, offset);
 
-		/*
-		 * First case, map an unwritten extent and prepare for
-		 * extent state conversion transaction on completion.
-		 *
-		 * Second case, allocate space for a delalloc buffer.
-		 * We can return EAGAIN here in the release page case.
-		 *
-		 * Third case, an unmapped buffer was found, and we are
-		 * in a path where we need to write the whole page out.
-		 */
-		if (buffer_unwritten(bh) || buffer_delay(bh) ||
-		    ((buffer_uptodate(bh) || PageUptodate(page)) &&
-		     !buffer_mapped(bh) && (unmapped || startio))) {
+		if (buffer_unwritten(bh) || buffer_delay(bh)) {
 			int new_ioend = 0;
 
 			/*
@@ -1161,15 +1137,16 @@
 				flags = BMAPI_WRITE | BMAPI_IGNSTATE;
 			} else if (buffer_delay(bh)) {
 				type = IO_DELAY;
-				flags = BMAPI_ALLOCATE | trylock;
-			} else {
-				type = IO_NEW;
-				flags = BMAPI_WRITE | BMAPI_MMAP;
+				flags = BMAPI_ALLOCATE;
+
+				if (wbc->sync_mode == WB_SYNC_NONE &&
+				    wbc->nonblocking)
+					flags |= BMAPI_TRYLOCK;
 			}
 
 			if (!imap_valid) {
 				/*
-				 * if we didn't have a valid mapping then we
+				 * If we didn't have a valid mapping then we
 				 * need to ensure that we put the new mapping
 				 * in a new ioend structure. This needs to be
 				 * done to ensure that the ioends correctly
@@ -1177,14 +1154,7 @@
 				 * for unwritten extent conversion.
 				 */
 				new_ioend = 1;
-				if (type == IO_NEW) {
-					size = xfs_probe_cluster(inode,
-							page, bh, head, 0);
-				} else {
-					size = len;
-				}
-
-				err = xfs_map_blocks(inode, offset, size,
+				err = xfs_map_blocks(inode, offset, len,
 						&imap, flags);
 				if (err)
 					goto error;
@@ -1193,19 +1163,11 @@
 			}
 			if (imap_valid) {
 				xfs_map_at_offset(inode, bh, &imap, offset);
-				if (startio) {
-					xfs_add_to_ioend(inode, bh, offset,
-							type, &ioend,
-							new_ioend);
-				} else {
-					set_buffer_dirty(bh);
-					unlock_buffer(bh);
-					mark_buffer_dirty(bh);
-				}
-				page_dirty--;
+				xfs_add_to_ioend(inode, bh, offset, type,
+						 &ioend, new_ioend);
 				count++;
 			}
-		} else if (buffer_uptodate(bh) && startio) {
+		} else if (buffer_uptodate(bh)) {
 			/*
 			 * we got here because the buffer is already mapped.
 			 * That means it must already have extents allocated
@@ -1213,8 +1175,7 @@
 			 */
 			if (!imap_valid || flags != BMAPI_READ) {
 				flags = BMAPI_READ;
-				size = xfs_probe_cluster(inode, page, bh,
-								head, 1);
+				size = xfs_probe_cluster(inode, page, bh, head);
 				err = xfs_map_blocks(inode, offset, size,
 						&imap, flags);
 				if (err)
@@ -1233,18 +1194,16 @@
 			 */
 			type = IO_NEW;
 			if (trylock_buffer(bh)) {
-				ASSERT(buffer_mapped(bh));
 				if (imap_valid)
 					all_bh = 1;
 				xfs_add_to_ioend(inode, bh, offset, type,
 						&ioend, !imap_valid);
-				page_dirty--;
 				count++;
 			} else {
 				imap_valid = 0;
 			}
-		} else if ((buffer_uptodate(bh) || PageUptodate(page)) &&
-			   (unmapped || startio)) {
+		} else if (PageUptodate(page)) {
+			ASSERT(buffer_mapped(bh));
 			imap_valid = 0;
 		}
 
@@ -1256,8 +1215,7 @@
 	if (uptodate && bh == head)
 		SetPageUptodate(page);
 
-	if (startio)
-		xfs_start_page_writeback(page, 1, count);
+	xfs_start_page_writeback(page, 1, count);
 
 	if (ioend && imap_valid) {
 		xfs_off_t		end_index;
@@ -1275,124 +1233,27 @@
 			end_index = last_index;
 
 		xfs_cluster_write(inode, page->index + 1, &imap, &ioend,
-					wbc, startio, all_bh, end_index);
+					wbc, all_bh, end_index);
 	}
 
 	if (iohead)
 		xfs_submit_ioend(wbc, iohead);
 
-	return page_dirty;
+	return 0;
 
 error:
 	if (iohead)
 		xfs_cancel_ioend(iohead);
 
-	/*
-	 * If it's delalloc and we have nowhere to put it,
-	 * throw it away, unless the lower layers told
-	 * us to try again.
-	 */
-	if (err != -EAGAIN) {
-		if (!unmapped)
-			xfs_aops_discard_page(page);
-		ClearPageUptodate(page);
-	}
+	xfs_aops_discard_page(page);
+	ClearPageUptodate(page);
+	unlock_page(page);
 	return err;
-}
-
-/*
- * writepage: Called from one of two places:
- *
- * 1. we are flushing a delalloc buffer head.
- *
- * 2. we are writing out a dirty page. Typically the page dirty
- *    state is cleared before we get here. In this case is it
- *    conceivable we have no buffer heads.
- *
- * For delalloc space on the page we need to allocate space and
- * flush it. For unmapped buffer heads on the page we should
- * allocate space if the page is uptodate. For any other dirty
- * buffer heads on the page we should flush them.
- *
- * If we detect that a transaction would be required to flush
- * the page, we have to check the process flags first, if we
- * are already in a transaction or disk I/O during allocations
- * is off, we need to fail the writepage and redirty the page.
- */
-
-STATIC int
-xfs_vm_writepage(
-	struct page		*page,
-	struct writeback_control *wbc)
-{
-	int			error;
-	int			need_trans;
-	int			delalloc, unmapped, unwritten;
-	struct inode		*inode = page->mapping->host;
-
-	trace_xfs_writepage(inode, page, 0);
-
-	/*
-	 * We need a transaction if:
-	 *  1. There are delalloc buffers on the page
-	 *  2. The page is uptodate and we have unmapped buffers
-	 *  3. The page is uptodate and we have no buffers
-	 *  4. There are unwritten buffers on the page
-	 */
-
-	if (!page_has_buffers(page)) {
-		unmapped = 1;
-		need_trans = 1;
-	} else {
-		xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
-		if (!PageUptodate(page))
-			unmapped = 0;
-		need_trans = delalloc + unmapped + unwritten;
-	}
-
-	/*
-	 * If we need a transaction and the process flags say
-	 * we are already in a transaction, or no IO is allowed
-	 * then mark the page dirty again and leave the page
-	 * as is.
-	 */
-	if (current_test_flags(PF_FSTRANS) && need_trans)
-		goto out_fail;
-
-	/*
-	 * Delay hooking up buffer heads until we have
-	 * made our go/no-go decision.
-	 */
-	if (!page_has_buffers(page))
-		create_empty_buffers(page, 1 << inode->i_blkbits, 0);
-
-
-	/*
-	 *  VM calculation for nr_to_write seems off.  Bump it way
-	 *  up, this gets simple streaming writes zippy again.
-	 *  To be reviewed again after Jens' writeback changes.
-	 */
-	wbc->nr_to_write *= 4;
-
-	/*
-	 * Convert delayed allocate, unwritten or unmapped space
-	 * to real space and flush out to disk.
-	 */
-	error = xfs_page_state_convert(inode, page, wbc, 1, unmapped);
-	if (error == -EAGAIN)
-		goto out_fail;
-	if (unlikely(error < 0))
-		goto out_unlock;
-
-	return 0;
 
 out_fail:
 	redirty_page_for_writepage(wbc, page);
 	unlock_page(page);
 	return 0;
-out_unlock:
-	unlock_page(page);
-	return error;
 }
 
 STATIC int
@@ -1406,65 +1267,27 @@
 
 /*
  * Called to move a page into cleanable state - and from there
- * to be released. Possibly the page is already clean. We always
+ * to be released. The page should already be clean. We always
  * have buffer heads in this call.
  *
- * Returns 0 if the page is ok to release, 1 otherwise.
- *
- * Possible scenarios are:
- *
- * 1. We are being called to release a page which has been written
- *    to via regular I/O. buffer heads will be dirty and possibly
- *    delalloc. If no delalloc buffer heads in this case then we
- *    can just return zero.
- *
- * 2. We are called to release a page which has been written via
- *    mmap, all we need to do is ensure there is no delalloc
- *    state in the buffer heads, if not we can let the caller
- *    free them and we should come back later via writepage.
+ * Returns 1 if the page is ok to release, 0 otherwise.
  */
 STATIC int
 xfs_vm_releasepage(
 	struct page		*page,
 	gfp_t			gfp_mask)
 {
-	struct inode		*inode = page->mapping->host;
-	int			dirty, delalloc, unmapped, unwritten;
-	struct writeback_control wbc = {
-		.sync_mode = WB_SYNC_ALL,
-		.nr_to_write = 1,
-	};
+	int			delalloc, unwritten;
 
-	trace_xfs_releasepage(inode, page, 0);
+	trace_xfs_releasepage(page->mapping->host, page, 0);
 
-	if (!page_has_buffers(page))
+	xfs_count_page_state(page, &delalloc, &unwritten);
+
+	if (WARN_ON(delalloc))
+		return 0;
+	if (WARN_ON(unwritten))
 		return 0;
 
-	xfs_count_page_state(page, &delalloc, &unmapped, &unwritten);
-	if (!delalloc && !unwritten)
-		goto free_buffers;
-
-	if (!(gfp_mask & __GFP_FS))
-		return 0;
-
-	/* If we are already inside a transaction or the thread cannot
-	 * do I/O, we cannot release this page.
-	 */
-	if (current_test_flags(PF_FSTRANS))
-		return 0;
-
-	/*
-	 * Convert delalloc space to real space, do not flush the
-	 * data out to disk, that will be done by the caller.
-	 * Never need to allocate space here - we will always
-	 * come back to writepage in that case.
-	 */
-	dirty = xfs_page_state_convert(inode, page, &wbc, 0, 0);
-	if (dirty == 0 && !unwritten)
-		goto free_buffers;
-	return 0;
-
-free_buffers:
 	return try_to_free_buffers(page);
 }
 
@@ -1474,9 +1297,9 @@
 	sector_t		iblock,
 	struct buffer_head	*bh_result,
 	int			create,
-	int			direct,
-	bmapi_flags_t		flags)
+	int			direct)
 {
+	int			flags = create ? BMAPI_WRITE : BMAPI_READ;
 	struct xfs_bmbt_irec	imap;
 	xfs_off_t		offset;
 	ssize_t			size;
@@ -1491,8 +1314,11 @@
 	if (!create && direct && offset >= i_size_read(inode))
 		return 0;
 
-	error = xfs_iomap(XFS_I(inode), offset, size,
-			     create ? flags : BMAPI_READ, &imap, &nimap, &new);
+	if (direct && create)
+		flags |= BMAPI_DIRECT;
+
+	error = xfs_iomap(XFS_I(inode), offset, size, flags, &imap, &nimap,
+			  &new);
 	if (error)
 		return -error;
 	if (nimap == 0)
@@ -1572,8 +1398,7 @@
 	struct buffer_head	*bh_result,
 	int			create)
 {
-	return __xfs_get_blocks(inode, iblock,
-				bh_result, create, 0, BMAPI_WRITE);
+	return __xfs_get_blocks(inode, iblock, bh_result, create, 0);
 }
 
 STATIC int
@@ -1583,54 +1408,30 @@
 	struct buffer_head	*bh_result,
 	int			create)
 {
-	return __xfs_get_blocks(inode, iblock,
-				bh_result, create, 1, BMAPI_WRITE|BMAPI_DIRECT);
+	return __xfs_get_blocks(inode, iblock, bh_result, create, 1);
 }
 
+/*
+ * Complete a direct I/O write request.
+ *
+ * If the private argument is non-NULL __xfs_get_blocks signals us that we
+ * need to issue a transaction to convert the range from unwritten to written
+ * extents.  In case this is regular synchronous I/O we just call xfs_end_io
+ * to do this and we are done.  But in case this was a successfull AIO
+ * request this handler is called from interrupt context, from which we
+ * can't start transactions.  In that case offload the I/O completion to
+ * the workqueues we also use for buffered I/O completion.
+ */
 STATIC void
-xfs_end_io_direct(
-	struct kiocb	*iocb,
-	loff_t		offset,
-	ssize_t		size,
-	void		*private)
+xfs_end_io_direct_write(
+	struct kiocb		*iocb,
+	loff_t			offset,
+	ssize_t			size,
+	void			*private,
+	int			ret,
+	bool			is_async)
 {
-	xfs_ioend_t	*ioend = iocb->private;
-
-	/*
-	 * Non-NULL private data means we need to issue a transaction to
-	 * convert a range from unwritten to written extents.  This needs
-	 * to happen from process context but aio+dio I/O completion
-	 * happens from irq context so we need to defer it to a workqueue.
-	 * This is not necessary for synchronous direct I/O, but we do
-	 * it anyway to keep the code uniform and simpler.
-	 *
-	 * Well, if only it were that simple. Because synchronous direct I/O
-	 * requires extent conversion to occur *before* we return to userspace,
-	 * we have to wait for extent conversion to complete. Look at the
-	 * iocb that has been passed to us to determine if this is AIO or
-	 * not. If it is synchronous, tell xfs_finish_ioend() to kick the
-	 * workqueue and wait for it to complete.
-	 *
-	 * The core direct I/O code might be changed to always call the
-	 * completion handler in the future, in which case all this can
-	 * go away.
-	 */
-	ioend->io_offset = offset;
-	ioend->io_size = size;
-	if (ioend->io_type == IO_READ) {
-		xfs_finish_ioend(ioend, 0);
-	} else if (private && size > 0) {
-		xfs_finish_ioend(ioend, is_sync_kiocb(iocb));
-	} else {
-		/*
-		 * A direct I/O write ioend starts it's life in unwritten
-		 * state in case they map an unwritten extent.  This write
-		 * didn't map an unwritten extent so switch it's completion
-		 * handler.
-		 */
-		ioend->io_type = IO_NEW;
-		xfs_finish_ioend(ioend, 0);
-	}
+	struct xfs_ioend	*ioend = iocb->private;
 
 	/*
 	 * blockdev_direct_IO can return an error even after the I/O
@@ -1638,6 +1439,28 @@
 	 * against double-freeing.
 	 */
 	iocb->private = NULL;
+
+	ioend->io_offset = offset;
+	ioend->io_size = size;
+	if (private && size > 0)
+		ioend->io_type = IO_UNWRITTEN;
+
+	if (is_async) {
+		/*
+		 * If we are converting an unwritten extent we need to delay
+		 * the AIO completion until after the unwrittent extent
+		 * conversion has completed, otherwise do it ASAP.
+		 */
+		if (ioend->io_type == IO_UNWRITTEN) {
+			ioend->io_iocb = iocb;
+			ioend->io_result = ret;
+		} else {
+			aio_complete(iocb, ret, 0);
+		}
+		xfs_finish_ioend(ioend);
+	} else {
+		xfs_finish_ioend_sync(ioend);
+	}
 }
 
 STATIC ssize_t
@@ -1648,23 +1471,26 @@
 	loff_t			offset,
 	unsigned long		nr_segs)
 {
-	struct file	*file = iocb->ki_filp;
-	struct inode	*inode = file->f_mapping->host;
-	struct block_device *bdev;
-	ssize_t		ret;
+	struct inode		*inode = iocb->ki_filp->f_mapping->host;
+	struct block_device	*bdev = xfs_find_bdev_for_inode(inode);
+	ssize_t			ret;
 
-	bdev = xfs_find_bdev_for_inode(inode);
+	if (rw & WRITE) {
+		iocb->private = xfs_alloc_ioend(inode, IO_NEW);
 
-	iocb->private = xfs_alloc_ioend(inode, rw == WRITE ?
-					IO_UNWRITTEN : IO_READ);
+		ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+						    offset, nr_segs,
+						    xfs_get_blocks_direct,
+						    xfs_end_io_direct_write);
+		if (ret != -EIOCBQUEUED && iocb->private)
+			xfs_destroy_ioend(iocb->private);
+	} else {
+		ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+						    offset, nr_segs,
+						    xfs_get_blocks_direct,
+						    NULL);
+	}
 
-	ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
-					    offset, nr_segs,
-					    xfs_get_blocks_direct,
-					    xfs_end_io_direct);
-
-	if (unlikely(ret != -EIOCBQUEUED && iocb->private))
-		xfs_destroy_ioend(iocb->private);
 	return ret;
 }
 
@@ -1679,8 +1505,8 @@
 	void			**fsdata)
 {
 	*pagep = NULL;
-	return block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
-								xfs_get_blocks);
+	return block_write_begin(file, mapping, pos, len, flags | AOP_FLAG_NOFS,
+				 pagep, fsdata, xfs_get_blocks);
 }
 
 STATIC sector_t
@@ -1691,7 +1517,7 @@
 	struct inode		*inode = (struct inode *)mapping->host;
 	struct xfs_inode	*ip = XFS_I(inode);
 
-	xfs_itrace_entry(XFS_I(inode));
+	trace_xfs_vm_bmap(XFS_I(inode));
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 	xfs_flush_pages(ip, (xfs_off_t)0, -1, 0, FI_REMAPF);
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 4cfc6ea..c5057fb 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -37,6 +37,8 @@
 	size_t			io_size;	/* size of the extent */
 	xfs_off_t		io_offset;	/* offset in the file */
 	struct work_struct	io_work;	/* xfsdatad work queue */
+	struct kiocb		*io_iocb;
+	int			io_result;
 } xfs_ioend_t;
 
 extern const struct address_space_operations xfs_address_space_operations;
@@ -45,6 +47,6 @@
 extern void xfs_ioend_init(void);
 extern void xfs_ioend_wait(struct xfs_inode *);
 
-extern void xfs_count_page_state(struct page *, int *, int *, int *);
+extern void xfs_count_page_state(struct page *, int *, int *);
 
 #endif /* __XFS_AOPS_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 649ade8..ea79072 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -39,13 +39,12 @@
 #include "xfs_inum.h"
 #include "xfs_log.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trace.h"
 
 static kmem_zone_t *xfs_buf_zone;
 STATIC int xfsbufd(void *);
-STATIC int xfsbufd_wakeup(int, gfp_t);
+STATIC int xfsbufd_wakeup(struct shrinker *, int, gfp_t);
 STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
 static struct shrinker xfs_buf_shake = {
 	.shrink = xfsbufd_wakeup,
@@ -340,7 +339,7 @@
 					__func__, gfp_mask);
 
 			XFS_STATS_INC(xb_page_retries);
-			xfsbufd_wakeup(0, gfp_mask);
+			xfsbufd_wakeup(NULL, 0, gfp_mask);
 			congestion_wait(BLK_RW_ASYNC, HZ/50);
 			goto retry;
 		}
@@ -579,9 +578,9 @@
 			XBF_READ_AHEAD | _XBF_RUN_QUEUES);
 
 	status = xfs_buf_iorequest(bp);
-	if (!status && !(flags & XBF_ASYNC))
-		status = xfs_buf_iowait(bp);
-	return status;
+	if (status || XFS_BUF_ISERROR(bp) || (flags & XBF_ASYNC))
+		return status;
+	return xfs_buf_iowait(bp);
 }
 
 xfs_buf_t *
@@ -897,36 +896,6 @@
 	trace_xfs_buf_unlock(bp, _RET_IP_);
 }
 
-
-/*
- *	Pinning Buffer Storage in Memory
- *	Ensure that no attempt to force a buffer to disk will succeed.
- */
-void
-xfs_buf_pin(
-	xfs_buf_t		*bp)
-{
-	trace_xfs_buf_pin(bp, _RET_IP_);
-	atomic_inc(&bp->b_pin_count);
-}
-
-void
-xfs_buf_unpin(
-	xfs_buf_t		*bp)
-{
-	trace_xfs_buf_unpin(bp, _RET_IP_);
-
-	if (atomic_dec_and_test(&bp->b_pin_count))
-		wake_up_all(&bp->b_waiters);
-}
-
-int
-xfs_buf_ispin(
-	xfs_buf_t		*bp)
-{
-	return atomic_read(&bp->b_pin_count);
-}
-
 STATIC void
 xfs_buf_wait_unpin(
 	xfs_buf_t		*bp)
@@ -1018,13 +987,12 @@
 {
 	int			error;
 
-	bp->b_strat = xfs_bdstrat_cb;
 	bp->b_mount = mp;
 	bp->b_flags |= XBF_WRITE;
 	bp->b_flags &= ~(XBF_ASYNC | XBF_READ);
 
 	xfs_buf_delwri_dequeue(bp);
-	xfs_buf_iostrategy(bp);
+	xfs_bdstrat_cb(bp);
 
 	error = xfs_buf_iowait(bp);
 	if (error)
@@ -1040,7 +1008,6 @@
 {
 	trace_xfs_buf_bdwrite(bp, _RET_IP_);
 
-	bp->b_strat = xfs_bdstrat_cb;
 	bp->b_mount = mp;
 
 	bp->b_flags &= ~XBF_READ;
@@ -1075,7 +1042,6 @@
 	XFS_BUF_UNDONE(bp);
 	XFS_BUF_STALE(bp);
 
-	XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 	xfs_biodone(bp);
 
 	return EIO;
@@ -1105,7 +1071,6 @@
 	XFS_BUF_DONE(bp);
 	XFS_BUF_STALE(bp);
 	XFS_BUF_CLR_IODONE_FUNC(bp);
-	XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 	if (!(fl & XBF_ASYNC)) {
 		/*
 		 * Mark b_error and B_ERROR _both_.
@@ -1311,8 +1276,19 @@
 		if (size)
 			goto next_chunk;
 	} else {
-		bio_put(bio);
+		/*
+		 * if we get here, no pages were added to the bio. However,
+		 * we can't just error out here - if the pages are locked then
+		 * we have to unlock them otherwise we can hang on a later
+		 * access to the page.
+		 */
 		xfs_buf_ioerror(bp, EIO);
+		if (bp->b_flags & _XBF_PAGE_LOCKED) {
+			int i;
+			for (i = 0; i < bp->b_page_count; i++)
+				unlock_page(bp->b_pages[i]);
+		}
+		bio_put(bio);
 	}
 }
 
@@ -1762,6 +1738,7 @@
 
 STATIC int
 xfsbufd_wakeup(
+	struct shrinker		*shrink,
 	int			priority,
 	gfp_t			mask)
 {
@@ -1803,7 +1780,7 @@
 		trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		ASSERT(bp->b_flags & XBF_DELWRI);
 
-		if (!xfs_buf_ispin(bp) && !xfs_buf_cond_lock(bp)) {
+		if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
 			if (!force &&
 			    time_before(jiffies, bp->b_queuetime + age)) {
 				xfs_buf_unlock(bp);
@@ -1888,7 +1865,7 @@
 			struct xfs_buf *bp;
 			bp = list_first_entry(&tmp, struct xfs_buf, b_list);
 			list_del_init(&bp->b_list);
-			xfs_buf_iostrategy(bp);
+			xfs_bdstrat_cb(bp);
 			count++;
 		}
 		if (count)
@@ -1935,7 +1912,7 @@
 			bp->b_flags &= ~XBF_ASYNC;
 			list_add(&bp->b_list, &wait_list);
 		}
-		xfs_buf_iostrategy(bp);
+		xfs_bdstrat_cb(bp);
 	}
 
 	if (wait) {
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 5fbecef..d072e5f 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -44,57 +44,57 @@
 	XBRW_ZERO = 3,			/* Zero target memory */
 } xfs_buf_rw_t;
 
-typedef enum {
-	XBF_READ = (1 << 0),	/* buffer intended for reading from device */
-	XBF_WRITE = (1 << 1),	/* buffer intended for writing to device   */
-	XBF_MAPPED = (1 << 2),  /* buffer mapped (b_addr valid)            */
-	XBF_ASYNC = (1 << 4),   /* initiator will not wait for completion  */
-	XBF_DONE = (1 << 5),    /* all pages in the buffer uptodate	   */
-	XBF_DELWRI = (1 << 6),  /* buffer has dirty pages                  */
-	XBF_STALE = (1 << 7),	/* buffer has been staled, do not find it  */
-	XBF_FS_MANAGED = (1 << 8),  /* filesystem controls freeing memory  */
- 	XBF_ORDERED = (1 << 11),    /* use ordered writes		   */
-	XBF_READ_AHEAD = (1 << 12), /* asynchronous read-ahead		   */
-	XBF_LOG_BUFFER = (1 << 13), /* this is a buffer used for the log   */
+#define XBF_READ	(1 << 0) /* buffer intended for reading from device */
+#define XBF_WRITE	(1 << 1) /* buffer intended for writing to device */
+#define XBF_MAPPED	(1 << 2) /* buffer mapped (b_addr valid) */
+#define XBF_ASYNC	(1 << 4) /* initiator will not wait for completion */
+#define XBF_DONE	(1 << 5) /* all pages in the buffer uptodate */
+#define XBF_DELWRI	(1 << 6) /* buffer has dirty pages */
+#define XBF_STALE	(1 << 7) /* buffer has been staled, do not find it */
+#define XBF_FS_MANAGED	(1 << 8) /* filesystem controls freeing memory */
+#define XBF_ORDERED	(1 << 11)/* use ordered writes */
+#define XBF_READ_AHEAD	(1 << 12)/* asynchronous read-ahead */
+#define XBF_LOG_BUFFER	(1 << 13)/* this is a buffer used for the log */
 
-	/* flags used only as arguments to access routines */
-	XBF_LOCK = (1 << 14),       /* lock requested			   */
-	XBF_TRYLOCK = (1 << 15),    /* lock requested, but do not wait	   */
-	XBF_DONT_BLOCK = (1 << 16), /* do not block in current thread	   */
+/* flags used only as arguments to access routines */
+#define XBF_LOCK	(1 << 14)/* lock requested */
+#define XBF_TRYLOCK	(1 << 15)/* lock requested, but do not wait */
+#define XBF_DONT_BLOCK	(1 << 16)/* do not block in current thread */
 
-	/* flags used only internally */
-	_XBF_PAGE_CACHE = (1 << 17),/* backed by pagecache		   */
-	_XBF_PAGES = (1 << 18),	    /* backed by refcounted pages	   */
-	_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue	   */
-	_XBF_DELWRI_Q = (1 << 21),   /* buffer on delwri queue		   */
+/* flags used only internally */
+#define _XBF_PAGE_CACHE	(1 << 17)/* backed by pagecache */
+#define _XBF_PAGES	(1 << 18)/* backed by refcounted pages */
+#define	_XBF_RUN_QUEUES	(1 << 19)/* run block device task queue	*/
+#define _XBF_DELWRI_Q	(1 << 21)/* buffer on delwri queue */
 
-	/*
-	 * Special flag for supporting metadata blocks smaller than a FSB.
-	 *
-	 * In this case we can have multiple xfs_buf_t on a single page and
-	 * need to lock out concurrent xfs_buf_t readers as they only
-	 * serialise access to the buffer.
-	 *
-	 * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
-	 * between reads of the page. Hence we can have one thread read the
-	 * page and modify it, but then race with another thread that thinks
-	 * the page is not up-to-date and hence reads it again.
-	 *
-	 * The result is that the first modifcation to the page is lost.
-	 * This sort of AGF/AGI reading race can happen when unlinking inodes
-	 * that require truncation and results in the AGI unlinked list
-	 * modifications being lost.
-	 */
-	_XBF_PAGE_LOCKED = (1 << 22),
+/*
+ * Special flag for supporting metadata blocks smaller than a FSB.
+ *
+ * In this case we can have multiple xfs_buf_t on a single page and
+ * need to lock out concurrent xfs_buf_t readers as they only
+ * serialise access to the buffer.
+ *
+ * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+ * between reads of the page. Hence we can have one thread read the
+ * page and modify it, but then race with another thread that thinks
+ * the page is not up-to-date and hence reads it again.
+ *
+ * The result is that the first modifcation to the page is lost.
+ * This sort of AGF/AGI reading race can happen when unlinking inodes
+ * that require truncation and results in the AGI unlinked list
+ * modifications being lost.
+ */
+#define _XBF_PAGE_LOCKED	(1 << 22)
 
-	/*
-	 * If we try a barrier write, but it fails we have to communicate
-	 * this to the upper layers.  Unfortunately b_error gets overwritten
-	 * when the buffer is re-issued so we have to add another flag to
-	 * keep this information.
-	 */
-	_XFS_BARRIER_FAILED = (1 << 23),
-} xfs_buf_flags_t;
+/*
+ * If we try a barrier write, but it fails we have to communicate
+ * this to the upper layers.  Unfortunately b_error gets overwritten
+ * when the buffer is re-issued so we have to add another flag to
+ * keep this information.
+ */
+#define _XFS_BARRIER_FAILED	(1 << 23)
+
+typedef unsigned int xfs_buf_flags_t;
 
 #define XFS_BUF_FLAGS \
 	{ XBF_READ,		"READ" }, \
@@ -187,7 +187,6 @@
 	atomic_t		b_io_remaining;	/* #outstanding I/O requests */
 	xfs_buf_iodone_t	b_iodone;	/* I/O completion function */
 	xfs_buf_relse_t		b_relse;	/* releasing function */
-	xfs_buf_bdstrat_t	b_strat;	/* pre-write function */
 	struct completion	b_iowait;	/* queue for I/O waiters */
 	void			*b_fspriv;
 	void			*b_fspriv2;
@@ -245,11 +244,6 @@
 extern void xfs_buf_iomove(xfs_buf_t *, size_t, size_t, void *,
 				xfs_buf_rw_t);
 
-static inline int xfs_buf_iostrategy(xfs_buf_t *bp)
-{
-	return bp->b_strat ? bp->b_strat(bp) : xfs_buf_iorequest(bp);
-}
-
 static inline int xfs_buf_geterror(xfs_buf_t *bp)
 {
 	return bp ? bp->b_error : ENOMEM;
@@ -258,11 +252,6 @@
 /* Buffer Utility Routines */
 extern xfs_caddr_t xfs_buf_offset(xfs_buf_t *, size_t);
 
-/* Pinning Buffer Storage in Memory */
-extern void xfs_buf_pin(xfs_buf_t *);
-extern void xfs_buf_unpin(xfs_buf_t *);
-extern int xfs_buf_ispin(xfs_buf_t *);
-
 /* Delayed Write Buffer Routines */
 extern void xfs_buf_delwri_dequeue(xfs_buf_t *);
 extern void xfs_buf_delwri_promote(xfs_buf_t *);
@@ -326,8 +315,6 @@
 #define XFS_BUF_IODONE_FUNC(bp)			((bp)->b_iodone)
 #define XFS_BUF_SET_IODONE_FUNC(bp, func)	((bp)->b_iodone = (func))
 #define XFS_BUF_CLR_IODONE_FUNC(bp)		((bp)->b_iodone = NULL)
-#define XFS_BUF_SET_BDSTRAT_FUNC(bp, func)	((bp)->b_strat = (func))
-#define XFS_BUF_CLR_BDSTRAT_FUNC(bp)		((bp)->b_strat = NULL)
 
 #define XFS_BUF_FSPRIVATE(bp, type)		((type)(bp)->b_fspriv)
 #define XFS_BUF_SET_FSPRIVATE(bp, val)		((bp)->b_fspriv = (void*)(val))
@@ -351,7 +338,7 @@
 #define XFS_BUF_SET_VTYPE(bp, type)		do { } while (0)
 #define XFS_BUF_SET_REF(bp, ref)		do { } while (0)
 
-#define XFS_BUF_ISPINNED(bp)	xfs_buf_ispin(bp)
+#define XFS_BUF_ISPINNED(bp)	atomic_read(&((bp)->b_pin_count))
 
 #define XFS_BUF_VALUSEMA(bp)	xfs_buf_lock_value(bp)
 #define XFS_BUF_CPSEMA(bp)	(xfs_buf_cond_lock(bp) == 0)
@@ -370,8 +357,6 @@
 	xfs_buf_rele(bp);
 }
 
-#define xfs_bpin(bp)		xfs_buf_pin(bp)
-#define xfs_bunpin(bp)		xfs_buf_unpin(bp)
 #define xfs_biodone(bp)		xfs_buf_ioend(bp, 0)
 
 #define xfs_biomove(bp, off, len, data, rw) \
diff --git a/fs/xfs/linux-2.6/xfs_dmapi_priv.h b/fs/xfs/linux-2.6/xfs_dmapi_priv.h
deleted file mode 100644
index a8b0b16..0000000
--- a/fs/xfs/linux-2.6/xfs_dmapi_priv.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2000-2006 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_DMAPI_PRIV_H__
-#define __XFS_DMAPI_PRIV_H__
-
-/*
- *	Based on IO_ISDIRECT, decide which i_ flag is set.
- */
-#define DM_SEM_FLAG_RD(ioflags) (((ioflags) & IO_ISDIRECT) ? \
-			      DM_FLAGS_IMUX : 0)
-#define DM_SEM_FLAG_WR	(DM_FLAGS_IALLOCSEM_WR | DM_FLAGS_IMUX)
-
-#endif /*__XFS_DMAPI_PRIV_H__*/
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 846b75a..3764d74 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -23,13 +23,13 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_export.h"
 #include "xfs_vnodeops.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
+#include "xfs_trace.h"
 
 /*
  * Note that we only accept fileids which are long enough rather than allow
@@ -128,13 +128,11 @@
 		return ERR_PTR(-ESTALE);
 
 	/*
-	 * The XFS_IGET_BULKSTAT means that an invalid inode number is just
-	 * fine and not an indication of a corrupted filesystem.  Because
-	 * clients can send any kind of invalid file handle, e.g. after
-	 * a restore on the server we have to deal with this case gracefully.
+	 * The XFS_IGET_UNTRUSTED means that an invalid inode number is just
+	 * fine and not an indication of a corrupted filesystem as clients can
+	 * send invalid file handles and we have to handle it gracefully..
 	 */
-	error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
-			 XFS_ILOCK_SHARED, &ip, 0);
+	error = xfs_iget(mp, NULL, ino, XFS_IGET_UNTRUSTED, 0, &ip);
 	if (error) {
 		/*
 		 * EINVAL means the inode cluster doesn't exist anymore.
@@ -149,11 +147,10 @@
 	}
 
 	if (ip->i_d.di_gen != generation) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
+		IRELE(ip);
 		return ERR_PTR(-ENOENT);
 	}
 
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 	return VFS_I(ip);
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 257a56b..ba8ad42 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -22,23 +22,15 @@
 #include "xfs_inum.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_trans.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 #include "xfs_da_btree.h"
 #include "xfs_ioctl.h"
@@ -108,7 +100,7 @@
 	int			error = 0;
 	int			log_flushed = 0;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_fsync(ip);
 
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
 		return -XFS_ERROR(EIO);
@@ -166,8 +158,7 @@
 		 * transaction.	 So we play it safe and fire off the
 		 * transaction anyway.
 		 */
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 		xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 		xfs_trans_set_sync(tp);
 		error = _xfs_trans_commit(tp, 0, &log_flushed);
@@ -275,20 +266,6 @@
 		mutex_lock(&inode->i_mutex);
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
-		int dmflags = FILP_DELAY_FLAG(file) | DM_SEM_FLAG_RD(ioflags);
-		int iolock = XFS_IOLOCK_SHARED;
-
-		ret = -XFS_SEND_DATA(mp, DM_EVENT_READ, ip, iocb->ki_pos, size,
-					dmflags, &iolock);
-		if (ret) {
-			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-			if (unlikely(ioflags & IO_ISDIRECT))
-				mutex_unlock(&inode->i_mutex);
-			return ret;
-		}
-	}
-
 	if (unlikely(ioflags & IO_ISDIRECT)) {
 		if (inode->i_mapping->nrpages) {
 			ret = -xfs_flushinval_pages(ip,
@@ -321,7 +298,6 @@
 	unsigned int		flags)
 {
 	struct xfs_inode	*ip = XFS_I(infilp->f_mapping->host);
-	struct xfs_mount	*mp = ip->i_mount;
 	int			ioflags = 0;
 	ssize_t			ret;
 
@@ -335,18 +311,6 @@
 
 	xfs_ilock(ip, XFS_IOLOCK_SHARED);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
-		int iolock = XFS_IOLOCK_SHARED;
-		int error;
-
-		error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, *ppos, count,
-					FILP_DELAY_FLAG(infilp), &iolock);
-		if (error) {
-			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-			return -error;
-		}
-	}
-
 	trace_xfs_file_splice_read(ip, count, *ppos, ioflags);
 
 	ret = generic_file_splice_read(infilp, ppos, pipe, count, flags);
@@ -367,7 +331,6 @@
 {
 	struct inode		*inode = outfilp->f_mapping->host;
 	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_mount	*mp = ip->i_mount;
 	xfs_fsize_t		isize, new_size;
 	int			ioflags = 0;
 	ssize_t			ret;
@@ -382,18 +345,6 @@
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_WRITE) && !(ioflags & IO_INVIS)) {
-		int iolock = XFS_IOLOCK_EXCL;
-		int error;
-
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, *ppos, count,
-					FILP_DELAY_FLAG(outfilp), &iolock);
-		if (error) {
-			xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-			return -error;
-		}
-	}
-
 	new_size = *ppos + count;
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
@@ -463,7 +414,7 @@
 	last_fsb = XFS_B_TO_FSBT(mp, isize);
 	nimaps = 1;
 	error = xfs_bmapi(NULL, ip, last_fsb, 1, 0, NULL, 0, &imap,
-			  &nimaps, NULL, NULL);
+			  &nimaps, NULL);
 	if (error) {
 		return error;
 	}
@@ -558,7 +509,7 @@
 		nimaps = 1;
 		zero_count_fsb = end_zero_fsb - start_zero_fsb + 1;
 		error = xfs_bmapi(NULL, ip, start_zero_fsb, zero_count_fsb,
-				  0, NULL, 0, &imap, &nimaps, NULL, NULL);
+				  0, NULL, 0, &imap, &nimaps, NULL);
 		if (error) {
 			ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
 			return error;
@@ -627,7 +578,6 @@
 	int			ioflags = 0;
 	xfs_fsize_t		isize, new_size;
 	int			iolock;
-	int			eventsent = 0;
 	size_t			ocount = 0, count;
 	int			need_i_mutex;
 
@@ -673,33 +623,6 @@
 		goto out_unlock_mutex;
 	}
 
-	if ((DM_EVENT_ENABLED(ip, DM_EVENT_WRITE) &&
-	    !(ioflags & IO_INVIS) && !eventsent)) {
-		int		dmflags = FILP_DELAY_FLAG(file);
-
-		if (need_i_mutex)
-			dmflags |= DM_FLAGS_IMUX;
-
-		xfs_iunlock(ip, XFS_ILOCK_EXCL);
-		error = XFS_SEND_DATA(ip->i_mount, DM_EVENT_WRITE, ip,
-				      pos, count, dmflags, &iolock);
-		if (error) {
-			goto out_unlock_internal;
-		}
-		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		eventsent = 1;
-
-		/*
-		 * The iolock was dropped and reacquired in XFS_SEND_DATA
-		 * so we have to recheck the size when appending.
-		 * We will only "goto start;" once, since having sent the
-		 * event prevents another call to XFS_SEND_DATA, which is
-		 * what allows the size to change in the first place.
-		 */
-		if ((file->f_flags & O_APPEND) && pos != ip->i_size)
-			goto start;
-	}
-
 	if (ioflags & IO_ISDIRECT) {
 		xfs_buftarg_t	*target =
 			XFS_IS_REALTIME_INODE(ip) ?
@@ -830,22 +753,6 @@
 		xfs_iunlock(ip, XFS_ILOCK_EXCL);
 	}
 
-	if (ret == -ENOSPC &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE) && !(ioflags & IO_INVIS)) {
-		xfs_iunlock(ip, iolock);
-		if (need_i_mutex)
-			mutex_unlock(&inode->i_mutex);
-		error = XFS_SEND_NAMESP(ip->i_mount, DM_EVENT_NOSPACE, ip,
-				DM_RIGHT_NULL, ip, DM_RIGHT_NULL, NULL, NULL,
-				0, 0, 0); /* Delay flag intentionally  unused */
-		if (need_i_mutex)
-			mutex_lock(&inode->i_mutex);
-		xfs_ilock(ip, iolock);
-		if (error)
-			goto out_unlock_internal;
-		goto start;
-	}
-
 	error = -ret;
 	if (ret <= 0)
 		goto out_unlock_internal;
@@ -1014,9 +921,6 @@
 	.open		= xfs_file_open,
 	.release	= xfs_file_release,
 	.fsync		= xfs_file_fsync,
-#ifdef HAVE_FOP_OPEN_EXEC
-	.open_exec	= xfs_file_open_exec,
-#endif
 };
 
 const struct file_operations xfs_dir_file_operations = {
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index b6918d7..1f279b01 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -21,10 +21,6 @@
 #include "xfs_inode.h"
 #include "xfs_trace.h"
 
-int  fs_noerr(void) { return 0; }
-int  fs_nosys(void) { return ENOSYS; }
-void fs_noval(void) { return; }
-
 /*
  * note: all filemap functions return negative error codes. These
  * need to be inverted before returning to the xfs core functions.
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.h b/fs/xfs/linux-2.6/xfs_fs_subr.h
deleted file mode 100644
index 82bb19b..0000000
--- a/fs/xfs/linux-2.6/xfs_fs_subr.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2000,2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef	__XFS_FS_SUBR_H__
-#define __XFS_FS_SUBR_H__
-
-extern int  fs_noerr(void);
-extern int  fs_nosys(void);
-extern void fs_noval(void);
-
-#endif	/* __XFS_FS_SUBR_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 699b60c..237f5ff 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -23,24 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ioctl.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_itable.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_bmap.h"
 #include "xfs_buf_item.h"
@@ -679,10 +670,9 @@
 		error = xfs_bulkstat_single(mp, &inlast,
 						bulkreq.ubuffer, &done);
 	else	/* XFS_IOC_FSBULKSTAT */
-		error = xfs_bulkstat(mp, &inlast, &count,
-			(bulkstat_one_pf)xfs_bulkstat_one, NULL,
-			sizeof(xfs_bstat_t), bulkreq.ubuffer,
-			BULKSTAT_FG_QUICK, &done);
+		error = xfs_bulkstat(mp, &inlast, &count, xfs_bulkstat_one,
+				     sizeof(xfs_bstat_t), bulkreq.ubuffer,
+				     &done);
 
 	if (error)
 		return -error;
@@ -909,7 +899,7 @@
 	struct xfs_dquot	*olddquot = NULL;
 	int			code;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_ioctl_setattr(ip);
 
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
@@ -1044,8 +1034,7 @@
 		}
 	}
 
-	xfs_trans_ijoin(tp, ip, lock_flags);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	/*
 	 * Change file ownership.  Must be the owner or privileged.
@@ -1117,16 +1106,7 @@
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
 
-	if (code)
-		return code;
-
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0,
-				(mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0);
-	}
-
-	return 0;
+	return code;
 
  error_return:
 	xfs_qm_dqrele(udqp);
@@ -1302,7 +1282,7 @@
 	if (filp->f_mode & FMODE_NOCMTIME)
 		ioflags |= IO_INVIS;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_ioctl(ip);
 
 	switch (cmd) {
 	case XFS_IOC_ALLOCSP:
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 9287135..6c83f7f 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -28,12 +28,8 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_vnode.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -237,15 +233,12 @@
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* buffer to place output in */
 	int		ubsize,		/* size of buffer */
-	void		*private_data,	/* my private data */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
 	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
 	int		*stat)		/* BULKSTAT_RV_... */
 {
 	return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
-				    xfs_bulkstat_one_fmt_compat, bno,
-				    ubused, dibuff, stat);
+				    xfs_bulkstat_one_fmt_compat,
+				    ubused, stat);
 }
 
 /* copied from xfs_ioctl.c */
@@ -298,13 +291,11 @@
 		int res;
 
 		error = xfs_bulkstat_one_compat(mp, inlast, bulkreq.ubuffer,
-				sizeof(compat_xfs_bstat_t),
-				NULL, 0, NULL, NULL, &res);
+				sizeof(compat_xfs_bstat_t), 0, &res);
 	} else if (cmd == XFS_IOC_FSBULKSTAT_32) {
 		error = xfs_bulkstat(mp, &inlast, &count,
-			xfs_bulkstat_one_compat, NULL,
-			sizeof(compat_xfs_bstat_t), bulkreq.ubuffer,
-			BULKSTAT_FG_QUICK, &done);
+			xfs_bulkstat_one_compat, sizeof(compat_xfs_bstat_t),
+			bulkreq.ubuffer, &done);
 	} else
 		error = XFS_ERROR(EINVAL);
 	if (error)
@@ -549,7 +540,7 @@
 	if (filp->f_mode & FMODE_NOCMTIME)
 		ioflags |= IO_INVIS;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_file_compat_ioctl(ip);
 
 	switch (cmd) {
 	/* No size or alignment issues on any arch */
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 9c8019c..536b81e 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -24,21 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
@@ -496,7 +488,7 @@
 	struct xfs_inode	*ip = XFS_I(inode);
 	struct xfs_mount	*mp = ip->i_mount;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_getattr(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -585,11 +577,20 @@
 	bf.l_len = len;
 
 	xfs_ilock(ip, XFS_IOLOCK_EXCL);
+
+	/* check the new inode size is valid before allocating */
+	if (!(mode & FALLOC_FL_KEEP_SIZE) &&
+	    offset + len > i_size_read(inode)) {
+		new_size = offset + len;
+		error = inode_newsize_ok(inode, new_size);
+		if (error)
+			goto out_unlock;
+	}
+
 	error = -xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf,
 				       0, XFS_ATTR_NOLOCK);
-	if (!error && !(mode & FALLOC_FL_KEEP_SIZE) &&
-	    offset + len > i_size_read(inode))
-		new_size = offset + len;
+	if (error)
+		goto out_unlock;
 
 	/* Change file size if needed */
 	if (new_size) {
@@ -600,6 +601,7 @@
 		error = -xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK);
 	}
 
+out_unlock:
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
 out_error:
 	return error;
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index facfb32..998a9d7 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -87,7 +87,6 @@
 #include <xfs_aops.h>
 #include <xfs_super.h>
 #include <xfs_globals.h>
-#include <xfs_fs_subr.h>
 #include <xfs_buf.h>
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index 9ac8aea..bfd5ac9 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -16,14 +16,12 @@
  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include "xfs.h"
-#include "xfs_dmapi.h"
 #include "xfs_sb.h"
 #include "xfs_inum.h"
 #include "xfs_log.h"
 #include "xfs_ag.h"
 #include "xfs_mount.h"
 #include "xfs_quota.h"
-#include "xfs_log.h"
 #include "xfs_trans.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inode.h"
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index f2d1718..758df946 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -25,14 +25,11 @@
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -43,7 +40,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_fsops.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -94,7 +90,6 @@
 #define MNTOPT_BARRIER	"barrier"	/* use writer barriers for log write and
 					 * unwritten extent conversion */
 #define MNTOPT_NOBARRIER "nobarrier"	/* .. disable */
-#define MNTOPT_OSYNCISOSYNC "osyncisosync" /* o_sync is REALLY o_sync */
 #define MNTOPT_64BITINODE   "inode64"	/* inodes can be allocated anywhere */
 #define MNTOPT_IKEEP	"ikeep"		/* do not free empty inode clusters */
 #define MNTOPT_NOIKEEP	"noikeep"	/* free empty inode clusters */
@@ -116,9 +111,6 @@
 #define MNTOPT_GQUOTANOENF "gqnoenforce"/* group quota limit enforcement */
 #define MNTOPT_PQUOTANOENF "pqnoenforce"/* project quota limit enforcement */
 #define MNTOPT_QUOTANOENF  "qnoenforce"	/* same as uqnoenforce */
-#define MNTOPT_DMAPI	"dmapi"		/* DMI enabled (DMAPI / XDSM) */
-#define MNTOPT_XDSM	"xdsm"		/* DMI enabled (DMAPI / XDSM) */
-#define MNTOPT_DMI	"dmi"		/* DMI enabled (DMAPI / XDSM) */
 #define MNTOPT_DELAYLOG   "delaylog"	/* Delayed loging enabled */
 #define MNTOPT_NODELAYLOG "nodelaylog"	/* Delayed loging disabled */
 
@@ -172,15 +164,13 @@
 STATIC int
 xfs_parseargs(
 	struct xfs_mount	*mp,
-	char			*options,
-	char			**mtpt)
+	char			*options)
 {
 	struct super_block	*sb = mp->m_super;
 	char			*this_char, *value, *eov;
 	int			dsunit = 0;
 	int			dswidth = 0;
 	int			iosize = 0;
-	int			dmapi_implies_ikeep = 1;
 	__uint8_t		iosizelog = 0;
 
 	/*
@@ -243,15 +233,10 @@
 			if (!mp->m_logname)
 				return ENOMEM;
 		} else if (!strcmp(this_char, MNTOPT_MTPT)) {
-			if (!value || !*value) {
-				cmn_err(CE_WARN,
-					"XFS: %s option requires an argument",
-					this_char);
-				return EINVAL;
-			}
-			*mtpt = kstrndup(value, MAXNAMELEN, GFP_KERNEL);
-			if (!*mtpt)
-				return ENOMEM;
+			cmn_err(CE_WARN,
+				"XFS: %s option not allowed on this system",
+				this_char);
+			return EINVAL;
 		} else if (!strcmp(this_char, MNTOPT_RTDEV)) {
 			if (!value || !*value) {
 				cmn_err(CE_WARN,
@@ -288,8 +273,6 @@
 			mp->m_flags &= ~XFS_MOUNT_GRPID;
 		} else if (!strcmp(this_char, MNTOPT_WSYNC)) {
 			mp->m_flags |= XFS_MOUNT_WSYNC;
-		} else if (!strcmp(this_char, MNTOPT_OSYNCISOSYNC)) {
-			mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC;
 		} else if (!strcmp(this_char, MNTOPT_NORECOVERY)) {
 			mp->m_flags |= XFS_MOUNT_NORECOVERY;
 		} else if (!strcmp(this_char, MNTOPT_NOALIGN)) {
@@ -329,7 +312,6 @@
 		} else if (!strcmp(this_char, MNTOPT_IKEEP)) {
 			mp->m_flags |= XFS_MOUNT_IKEEP;
 		} else if (!strcmp(this_char, MNTOPT_NOIKEEP)) {
-			dmapi_implies_ikeep = 0;
 			mp->m_flags &= ~XFS_MOUNT_IKEEP;
 		} else if (!strcmp(this_char, MNTOPT_LARGEIO)) {
 			mp->m_flags &= ~XFS_MOUNT_COMPAT_IOSIZE;
@@ -370,12 +352,6 @@
 		} else if (!strcmp(this_char, MNTOPT_GQUOTANOENF)) {
 			mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
 			mp->m_qflags &= ~XFS_OQUOTA_ENFD;
-		} else if (!strcmp(this_char, MNTOPT_DMAPI)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
-		} else if (!strcmp(this_char, MNTOPT_XDSM)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
-		} else if (!strcmp(this_char, MNTOPT_DMI)) {
-			mp->m_flags |= XFS_MOUNT_DMAPI;
 		} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
 			mp->m_flags |= XFS_MOUNT_DELAYLOG;
 			cmn_err(CE_WARN,
@@ -387,9 +363,11 @@
 			cmn_err(CE_WARN,
 	"XFS: ihashsize no longer used, option is deprecated.");
 		} else if (!strcmp(this_char, "osyncisdsync")) {
-			/* no-op, this is now the default */
 			cmn_err(CE_WARN,
-	"XFS: osyncisdsync is now the default, option is deprecated.");
+	"XFS: osyncisdsync has no effect, option is deprecated.");
+		} else if (!strcmp(this_char, "osyncisosync")) {
+			cmn_err(CE_WARN,
+	"XFS: osyncisosync has no effect, option is deprecated.");
 		} else if (!strcmp(this_char, "irixsgid")) {
 			cmn_err(CE_WARN,
 	"XFS: irixsgid is now a sysctl(2) variable, option is deprecated.");
@@ -430,12 +408,6 @@
 		return EINVAL;
 	}
 
-	if ((mp->m_flags & XFS_MOUNT_DMAPI) && (!*mtpt || *mtpt[0] == '\0')) {
-		printk("XFS: %s option needs the mount point option as well\n",
-			MNTOPT_DMAPI);
-		return EINVAL;
-	}
-
 	if ((dsunit && !dswidth) || (!dsunit && dswidth)) {
 		cmn_err(CE_WARN,
 			"XFS: sunit and swidth must be specified together");
@@ -449,18 +421,6 @@
 		return EINVAL;
 	}
 
-	/*
-	 * Applications using DMI filesystems often expect the
-	 * inode generation number to be monotonically increasing.
-	 * If we delete inode chunks we break this assumption, so
-	 * keep unused inode chunks on disk for DMI filesystems
-	 * until we come up with a better solution.
-	 * Note that if "ikeep" or "noikeep" mount options are
-	 * supplied, then they are honored.
-	 */
-	if ((mp->m_flags & XFS_MOUNT_DMAPI) && dmapi_implies_ikeep)
-		mp->m_flags |= XFS_MOUNT_IKEEP;
-
 done:
 	if (!(mp->m_flags & XFS_MOUNT_NOALIGN)) {
 		/*
@@ -539,10 +499,8 @@
 		{ XFS_MOUNT_SWALLOC,		"," MNTOPT_SWALLOC },
 		{ XFS_MOUNT_NOUUID,		"," MNTOPT_NOUUID },
 		{ XFS_MOUNT_NORECOVERY,		"," MNTOPT_NORECOVERY },
-		{ XFS_MOUNT_OSYNCISOSYNC,	"," MNTOPT_OSYNCISOSYNC },
 		{ XFS_MOUNT_ATTR2,		"," MNTOPT_ATTR2 },
 		{ XFS_MOUNT_FILESTREAMS,	"," MNTOPT_FILESTREAM },
-		{ XFS_MOUNT_DMAPI,		"," MNTOPT_DMAPI },
 		{ XFS_MOUNT_GRPID,		"," MNTOPT_GRPID },
 		{ XFS_MOUNT_DELAYLOG,		"," MNTOPT_DELAYLOG },
 		{ 0, NULL }
@@ -947,7 +905,7 @@
 {
 	struct xfs_inode	*ip = XFS_I(inode);
 
-	xfs_itrace_entry(ip);
+	trace_xfs_destroy_inode(ip);
 
 	XFS_STATS_INC(vn_reclaim);
 
@@ -1063,10 +1021,8 @@
 	 * an inode in another recent transaction.  So we play it safe and
 	 * fire off the transaction anyway.
 	 */
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	xfs_trans_set_sync(tp);
 	error = xfs_trans_commit(tp, 0);
 	xfs_ilock_demote(ip, XFS_ILOCK_EXCL);
 
@@ -1082,27 +1038,18 @@
 	struct xfs_mount	*mp = ip->i_mount;
 	int			error = EAGAIN;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_write_inode(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
 	if (wbc->sync_mode == WB_SYNC_ALL) {
 		/*
-		 * Make sure the inode has hit stable storage.  By using the
-		 * log and the fsync transactions we reduce the IOs we have
-		 * to do here from two (log and inode) to just the log.
-		 *
-		 * Note: We still need to do a delwri write of the inode after
-		 * this to flush it to the backing buffer so that bulkstat
-		 * works properly if this is the first time the inode has been
-		 * written.  Because we hold the ilock atomically over the
-		 * transaction commit and the inode flush we are guaranteed
-		 * that the inode is not pinned when it returns. If the flush
-		 * lock is already held, then the inode has already been
-		 * flushed once and we don't need to flush it again.  Hence
-		 * the code will only flush the inode if it isn't already
-		 * being flushed.
+		 * Make sure the inode has made it it into the log.  Instead
+		 * of forcing it all the way to stable storage using a
+		 * synchronous transaction we let the log force inside the
+		 * ->sync_fs call do that for thus, which reduces the number
+		 * of synchronous log foces dramatically.
 		 */
 		xfs_ioend_wait(ip);
 		xfs_ilock(ip, XFS_ILOCK_SHARED);
@@ -1116,27 +1063,29 @@
 		 * We make this non-blocking if the inode is contended, return
 		 * EAGAIN to indicate to the caller that they did not succeed.
 		 * This prevents the flush path from blocking on inodes inside
-		 * another operation right now, they get caught later by xfs_sync.
+		 * another operation right now, they get caught later by
+		 * xfs_sync.
 		 */
 		if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED))
 			goto out;
-	}
 
-	if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip))
-		goto out_unlock;
+		if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip))
+			goto out_unlock;
 
-	/*
-	 * Now we have the flush lock and the inode is not pinned, we can check
-	 * if the inode is really clean as we know that there are no pending
-	 * transaction completions, it is not waiting on the delayed write
-	 * queue and there is no IO in progress.
-	 */
-	if (xfs_inode_clean(ip)) {
-		xfs_ifunlock(ip);
-		error = 0;
-		goto out_unlock;
+		/*
+		 * Now we have the flush lock and the inode is not pinned, we
+		 * can check if the inode is really clean as we know that
+		 * there are no pending transaction completions, it is not
+		 * waiting on the delayed write queue and there is no IO in
+		 * progress.
+		 */
+		if (xfs_inode_clean(ip)) {
+			xfs_ifunlock(ip);
+			error = 0;
+			goto out_unlock;
+		}
+		error = xfs_iflush(ip, 0);
 	}
-	error = xfs_iflush(ip, 0);
 
  out_unlock:
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
@@ -1156,7 +1105,8 @@
 {
 	xfs_inode_t		*ip = XFS_I(inode);
 
-	xfs_itrace_entry(ip);
+	trace_xfs_clear_inode(ip);
+
 	XFS_STATS_INC(vn_rele);
 	XFS_STATS_INC(vn_remove);
 	XFS_STATS_DEC(vn_active);
@@ -1193,22 +1143,13 @@
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
+	/*
+	 * Unregister the memory shrinker before we tear down the mount
+	 * structure so we don't have memory reclaim racing with us here.
+	 */
+	xfs_inode_shrinker_unregister(mp);
 	xfs_syncd_stop(mp);
 
-	if (!(sb->s_flags & MS_RDONLY)) {
-		/*
-		 * XXX(hch): this should be SYNC_WAIT.
-		 *
-		 * Or more likely not needed at all because the VFS is already
-		 * calling ->sync_fs after shutting down all filestem
-		 * operations and just before calling ->put_super.
-		 */
-		xfs_sync_data(mp, 0);
-		xfs_sync_attr(mp, 0);
-	}
-
-	XFS_SEND_PREUNMOUNT(mp);
-
 	/*
 	 * Blow away any referenced inode in the filestreams cache.
 	 * This can and will cause log traffic as inodes go inactive
@@ -1218,14 +1159,10 @@
 
 	XFS_bflush(mp->m_ddev_targp);
 
-	XFS_SEND_UNMOUNT(mp);
-
 	xfs_unmountfs(mp);
 	xfs_freesb(mp);
-	xfs_inode_shrinker_unregister(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
-	xfs_dmops_put(mp);
 	xfs_free_fsname(mp);
 	kfree(mp);
 }
@@ -1543,7 +1480,6 @@
 	struct inode		*root;
 	struct xfs_mount	*mp = NULL;
 	int			flags = 0, error = ENOMEM;
-	char			*mtpt = NULL;
 
 	mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL);
 	if (!mp)
@@ -1559,7 +1495,7 @@
 	mp->m_super = sb;
 	sb->s_fs_info = mp;
 
-	error = xfs_parseargs(mp, (char *)data, &mtpt);
+	error = xfs_parseargs(mp, (char *)data);
 	if (error)
 		goto out_free_fsname;
 
@@ -1571,16 +1507,12 @@
 #endif
 	sb->s_op = &xfs_super_operations;
 
-	error = xfs_dmops_get(mp);
-	if (error)
-		goto out_free_fsname;
-
 	if (silent)
 		flags |= XFS_MFSI_QUIET;
 
 	error = xfs_open_devices(mp);
 	if (error)
-		goto out_put_dmops;
+		goto out_free_fsname;
 
 	if (xfs_icsb_init_counters(mp))
 		mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB;
@@ -1608,8 +1540,6 @@
 	if (error)
 		goto out_filestream_unmount;
 
-	XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, mtpt, mp->m_fsname);
-
 	sb->s_magic = XFS_SB_MAGIC;
 	sb->s_blocksize = mp->m_sb.sb_blocksize;
 	sb->s_blocksize_bits = ffs(sb->s_blocksize) - 1;
@@ -1638,7 +1568,6 @@
 
 	xfs_inode_shrinker_register(mp);
 
-	kfree(mtpt);
 	return 0;
 
  out_filestream_unmount:
@@ -1648,11 +1577,8 @@
  out_destroy_counters:
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
- out_put_dmops:
-	xfs_dmops_put(mp);
  out_free_fsname:
 	xfs_free_fsname(mp);
-	kfree(mtpt);
 	kfree(mp);
  out:
 	return -error;
@@ -1759,6 +1685,12 @@
 	if (!xfs_trans_zone)
 		goto out_destroy_ifork_zone;
 
+	xfs_log_item_desc_zone =
+		kmem_zone_init(sizeof(struct xfs_log_item_desc),
+			       "xfs_log_item_desc");
+	if (!xfs_log_item_desc_zone)
+		goto out_destroy_trans_zone;
+
 	/*
 	 * The size of the zone allocated buf log item is the maximum
 	 * size possible under XFS.  This wastes a little bit of memory,
@@ -1768,7 +1700,7 @@
 				(((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) /
 				  NBWORD) * sizeof(int))), "xfs_buf_item");
 	if (!xfs_buf_item_zone)
-		goto out_destroy_trans_zone;
+		goto out_destroy_log_item_desc_zone;
 
 	xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) +
 			((XFS_EFD_MAX_FAST_EXTENTS - 1) *
@@ -1805,6 +1737,8 @@
 	kmem_zone_destroy(xfs_efd_zone);
  out_destroy_buf_item_zone:
 	kmem_zone_destroy(xfs_buf_item_zone);
+ out_destroy_log_item_desc_zone:
+	kmem_zone_destroy(xfs_log_item_desc_zone);
  out_destroy_trans_zone:
 	kmem_zone_destroy(xfs_trans_zone);
  out_destroy_ifork_zone:
@@ -1835,6 +1769,7 @@
 	kmem_zone_destroy(xfs_efi_zone);
 	kmem_zone_destroy(xfs_efd_zone);
 	kmem_zone_destroy(xfs_buf_item_zone);
+	kmem_zone_destroy(xfs_log_item_desc_zone);
 	kmem_zone_destroy(xfs_trans_zone);
 	kmem_zone_destroy(xfs_ifork_zone);
 	kmem_zone_destroy(xfs_dabuf_zone);
@@ -1883,7 +1818,6 @@
 		goto out_cleanup_procfs;
 
 	vfs_initquota();
-	xfs_inode_shrinker_init();
 
 	error = register_filesystem(&xfs_fs_type);
 	if (error)
@@ -1911,7 +1845,6 @@
 {
 	vfs_exitquota();
 	unregister_filesystem(&xfs_fs_type);
-	xfs_inode_shrinker_destroy();
 	xfs_sysctl_unregister();
 	xfs_cleanup_procfs();
 	xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h
index 519618e..1ef4a4d 100644
--- a/fs/xfs/linux-2.6/xfs_super.h
+++ b/fs/xfs/linux-2.6/xfs_super.h
@@ -56,12 +56,6 @@
 # define XFS_BIGFS_STRING
 #endif
 
-#ifdef CONFIG_XFS_DMAPI
-# define XFS_DMAPI_STRING	"dmapi support, "
-#else
-# define XFS_DMAPI_STRING
-#endif
-
 #ifdef DEBUG
 # define XFS_DBG_STRING		"debug"
 #else
@@ -72,7 +66,6 @@
 				XFS_SECURITY_STRING \
 				XFS_REALTIME_STRING \
 				XFS_BIGFS_STRING \
-				XFS_DMAPI_STRING \
 				XFS_DBG_STRING /* DBG must be last */
 
 struct xfs_inode;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 3884e20..dfcbd98 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -24,25 +24,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_inode.h"
 #include "xfs_dinode.h"
 #include "xfs_error.h"
-#include "xfs_mru_cache.h"
 #include "xfs_filestream.h"
 #include "xfs_vnodeops.h"
-#include "xfs_utils.h"
-#include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
-#include "xfs_rw.h"
 #include "xfs_quota.h"
 #include "xfs_trace.h"
 
@@ -144,6 +133,41 @@
 	return last_error;
 }
 
+/*
+ * Select the next per-ag structure to iterate during the walk. The reclaim
+ * walk is optimised only to walk AGs with reclaimable inodes in them.
+ */
+static struct xfs_perag *
+xfs_inode_ag_iter_next_pag(
+	struct xfs_mount	*mp,
+	xfs_agnumber_t		*first,
+	int			tag)
+{
+	struct xfs_perag	*pag = NULL;
+
+	if (tag == XFS_ICI_RECLAIM_TAG) {
+		int found;
+		int ref;
+
+		spin_lock(&mp->m_perag_lock);
+		found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
+				(void **)&pag, *first, 1, tag);
+		if (found <= 0) {
+			spin_unlock(&mp->m_perag_lock);
+			return NULL;
+		}
+		*first = pag->pag_agno + 1;
+		/* open coded pag reference increment */
+		ref = atomic_inc_return(&pag->pag_ref);
+		spin_unlock(&mp->m_perag_lock);
+		trace_xfs_perag_get_reclaim(mp, pag->pag_agno, ref, _RET_IP_);
+	} else {
+		pag = xfs_perag_get(mp, *first);
+		(*first)++;
+	}
+	return pag;
+}
+
 int
 xfs_inode_ag_iterator(
 	struct xfs_mount	*mp,
@@ -154,20 +178,15 @@
 	int			exclusive,
 	int			*nr_to_scan)
 {
+	struct xfs_perag	*pag;
 	int			error = 0;
 	int			last_error = 0;
 	xfs_agnumber_t		ag;
 	int			nr;
 
 	nr = nr_to_scan ? *nr_to_scan : INT_MAX;
-	for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
-		struct xfs_perag	*pag;
-
-		pag = xfs_perag_get(mp, ag);
-		if (!pag->pag_ici_init) {
-			xfs_perag_put(pag);
-			continue;
-		}
+	ag = 0;
+	while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag, tag))) {
 		error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
 						exclusive, &nr);
 		xfs_perag_put(pag);
@@ -289,7 +308,7 @@
 /*
  * Write out pagecache data for the whole filesystem.
  */
-int
+STATIC int
 xfs_sync_data(
 	struct xfs_mount	*mp,
 	int			flags)
@@ -310,7 +329,7 @@
 /*
  * Write out inode metadata (attributes) for the whole filesystem.
  */
-int
+STATIC int
 xfs_sync_attr(
 	struct xfs_mount	*mp,
 	int			flags)
@@ -343,8 +362,7 @@
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	error = xfs_trans_commit(tp, 0);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
@@ -644,6 +662,17 @@
 	radix_tree_tag_set(&pag->pag_ici_root,
 			   XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
 			   XFS_ICI_RECLAIM_TAG);
+
+	if (!pag->pag_ici_reclaimable) {
+		/* propagate the reclaim tag up into the perag radix tree */
+		spin_lock(&ip->i_mount->m_perag_lock);
+		radix_tree_tag_set(&ip->i_mount->m_perag_tree,
+				XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+				XFS_ICI_RECLAIM_TAG);
+		spin_unlock(&ip->i_mount->m_perag_lock);
+		trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
+							-1, _RET_IP_);
+	}
 	pag->pag_ici_reclaimable++;
 }
 
@@ -678,6 +707,16 @@
 	radix_tree_tag_clear(&pag->pag_ici_root,
 			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
 	pag->pag_ici_reclaimable--;
+	if (!pag->pag_ici_reclaimable) {
+		/* clear the reclaim tag from the perag radix tree */
+		spin_lock(&ip->i_mount->m_perag_lock);
+		radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
+				XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+				XFS_ICI_RECLAIM_TAG);
+		spin_unlock(&ip->i_mount->m_perag_lock);
+		trace_xfs_perag_clear_reclaim(ip->i_mount, pag->pag_agno,
+							-1, _RET_IP_);
+	}
 }
 
 /*
@@ -816,7 +855,36 @@
 reclaim:
 	xfs_ifunlock(ip);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
-	xfs_ireclaim(ip);
+
+	XFS_STATS_INC(xs_ig_reclaims);
+	/*
+	 * Remove the inode from the per-AG radix tree.
+	 *
+	 * Because radix_tree_delete won't complain even if the item was never
+	 * added to the tree assert that it's been there before to catch
+	 * problems with the inode life time early on.
+	 */
+	write_lock(&pag->pag_ici_lock);
+	if (!radix_tree_delete(&pag->pag_ici_root,
+				XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
+		ASSERT(0);
+	write_unlock(&pag->pag_ici_lock);
+
+	/*
+	 * Here we do an (almost) spurious inode lock in order to coordinate
+	 * with inode cache radix tree lookups.  This is because the lookup
+	 * can reference the inodes in the cache without taking references.
+	 *
+	 * We make that OK here by ensuring that we wait until the inode is
+	 * unlocked after the lookup before we go ahead and free it.  We get
+	 * both the ilock and the iolock because the code may need to drop the
+	 * ilock one but will still hold the iolock.
+	 */
+	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_qm_dqdetach(ip);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+
+	xfs_inode_free(ip);
 	return error;
 
 }
@@ -832,88 +900,52 @@
 
 /*
  * Shrinker infrastructure.
- *
- * This is all far more complex than it needs to be. It adds a global list of
- * mounts because the shrinkers can only call a global context. We need to make
- * the shrinkers pass a context to avoid the need for global state.
  */
-static LIST_HEAD(xfs_mount_list);
-static struct rw_semaphore xfs_mount_list_lock;
-
 static int
 xfs_reclaim_inode_shrink(
+	struct shrinker	*shrink,
 	int		nr_to_scan,
 	gfp_t		gfp_mask)
 {
 	struct xfs_mount *mp;
 	struct xfs_perag *pag;
 	xfs_agnumber_t	ag;
-	int		reclaimable = 0;
+	int		reclaimable;
 
+	mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
 	if (nr_to_scan) {
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 
-		down_read(&xfs_mount_list_lock);
-		list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
-			xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+		xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
 					XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
-			if (nr_to_scan <= 0)
-				break;
-		}
-		up_read(&xfs_mount_list_lock);
-	}
+		/* if we don't exhaust the scan, don't bother coming back */
+		if (nr_to_scan > 0)
+			return -1;
+       }
 
-	down_read(&xfs_mount_list_lock);
-	list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
-		for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
-
-			pag = xfs_perag_get(mp, ag);
-			if (!pag->pag_ici_init) {
-				xfs_perag_put(pag);
-				continue;
-			}
-			reclaimable += pag->pag_ici_reclaimable;
-			xfs_perag_put(pag);
-		}
+	reclaimable = 0;
+	ag = 0;
+	while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag,
+					XFS_ICI_RECLAIM_TAG))) {
+		reclaimable += pag->pag_ici_reclaimable;
+		xfs_perag_put(pag);
 	}
-	up_read(&xfs_mount_list_lock);
 	return reclaimable;
 }
 
-static struct shrinker xfs_inode_shrinker = {
-	.shrink = xfs_reclaim_inode_shrink,
-	.seeks = DEFAULT_SEEKS,
-};
-
-void __init
-xfs_inode_shrinker_init(void)
-{
-	init_rwsem(&xfs_mount_list_lock);
-	register_shrinker(&xfs_inode_shrinker);
-}
-
-void
-xfs_inode_shrinker_destroy(void)
-{
-	ASSERT(list_empty(&xfs_mount_list));
-	unregister_shrinker(&xfs_inode_shrinker);
-}
-
 void
 xfs_inode_shrinker_register(
 	struct xfs_mount	*mp)
 {
-	down_write(&xfs_mount_list_lock);
-	list_add_tail(&mp->m_mplist, &xfs_mount_list);
-	up_write(&xfs_mount_list_lock);
+	mp->m_inode_shrink.shrink = xfs_reclaim_inode_shrink;
+	mp->m_inode_shrink.seeks = DEFAULT_SEEKS;
+	register_shrinker(&mp->m_inode_shrink);
 }
 
 void
 xfs_inode_shrinker_unregister(
 	struct xfs_mount	*mp)
 {
-	down_write(&xfs_mount_list_lock);
-	list_del(&mp->m_mplist);
-	up_write(&xfs_mount_list_lock);
+	unregister_shrinker(&mp->m_inode_shrink);
 }
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index cdcbaac..fe78726 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -35,9 +35,6 @@
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
 
-int xfs_sync_attr(struct xfs_mount *mp, int flags);
-int xfs_sync_data(struct xfs_mount *mp, int flags);
-
 int xfs_quiesce_data(struct xfs_mount *mp);
 void xfs_quiesce_attr(struct xfs_mount *mp);
 
@@ -55,8 +52,6 @@
 	int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
 	int flags, int tag, int write_lock, int *nr_to_scan);
 
-void xfs_inode_shrinker_init(void);
-void xfs_inode_shrinker_destroy(void);
 void xfs_inode_shrinker_register(struct xfs_mount *mp);
 void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
 
diff --git a/fs/xfs/linux-2.6/xfs_trace.c b/fs/xfs/linux-2.6/xfs_trace.c
index 207fa77..88d25d4 100644
--- a/fs/xfs/linux-2.6/xfs_trace.c
+++ b/fs/xfs/linux-2.6/xfs_trace.c
@@ -24,17 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
@@ -50,7 +46,6 @@
 #include "quota/xfs_dquot_item.h"
 #include "quota/xfs_dquot.h"
 #include "xfs_log_recover.h"
-#include "xfs_buf_item.h"
 #include "xfs_inode_item.h"
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index ff6bc79..c657cdca 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -82,33 +82,6 @@
 	)
 )
 
-#define DEFINE_PERAG_REF_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount, \
-		 unsigned long caller_ip), \
-	TP_ARGS(mp, agno, refcount, caller_ip), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_agnumber_t, agno) \
-		__field(int, refcount) \
-		__field(unsigned long, caller_ip) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = mp->m_super->s_dev; \
-		__entry->agno = agno; \
-		__entry->refcount = refcount; \
-		__entry->caller_ip = caller_ip; \
-	), \
-	TP_printk("dev %d:%d agno %u refcount %d caller %pf", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->agno, \
-		  __entry->refcount, \
-		  (char *)__entry->caller_ip) \
-);
-
-DEFINE_PERAG_REF_EVENT(xfs_perag_get)
-DEFINE_PERAG_REF_EVENT(xfs_perag_put)
-
 #define DEFINE_ATTR_LIST_EVENT(name) \
 DEFINE_EVENT(xfs_attr_list_class, name, \
 	TP_PROTO(struct xfs_attr_list_context *ctx), \
@@ -122,6 +95,40 @@
 DEFINE_ATTR_LIST_EVENT(xfs_attr_list_wrong_blk);
 DEFINE_ATTR_LIST_EVENT(xfs_attr_list_notfound);
 
+DECLARE_EVENT_CLASS(xfs_perag_class,
+	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount,
+		 unsigned long caller_ip),
+	TP_ARGS(mp, agno, refcount, caller_ip),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_agnumber_t, agno)
+		__field(int, refcount)
+		__field(unsigned long, caller_ip)
+	),
+	TP_fast_assign(
+		__entry->dev = mp->m_super->s_dev;
+		__entry->agno = agno;
+		__entry->refcount = refcount;
+		__entry->caller_ip = caller_ip;
+	),
+	TP_printk("dev %d:%d agno %u refcount %d caller %pf",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->agno,
+		  __entry->refcount,
+		  (char *)__entry->caller_ip)
+);
+
+#define DEFINE_PERAG_REF_EVENT(name)	\
+DEFINE_EVENT(xfs_perag_class, name,	\
+	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, int refcount,	\
+		 unsigned long caller_ip),					\
+	TP_ARGS(mp, agno, refcount, caller_ip))
+DEFINE_PERAG_REF_EVENT(xfs_perag_get);
+DEFINE_PERAG_REF_EVENT(xfs_perag_get_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_put);
+DEFINE_PERAG_REF_EVENT(xfs_perag_set_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_clear_reclaim);
+
 TRACE_EVENT(xfs_attr_list_node_descend,
 	TP_PROTO(struct xfs_attr_list_context *ctx,
 		 struct xfs_da_node_entry *btree),
@@ -310,8 +317,6 @@
 DEFINE_BUF_EVENT(xfs_buf_free);
 DEFINE_BUF_EVENT(xfs_buf_hold);
 DEFINE_BUF_EVENT(xfs_buf_rele);
-DEFINE_BUF_EVENT(xfs_buf_pin);
-DEFINE_BUF_EVENT(xfs_buf_unpin);
 DEFINE_BUF_EVENT(xfs_buf_iodone);
 DEFINE_BUF_EVENT(xfs_buf_iorequest);
 DEFINE_BUF_EVENT(xfs_buf_bawrite);
@@ -534,7 +539,7 @@
 DEFINE_LOCK_EVENT(xfs_ilock_demote);
 DEFINE_LOCK_EVENT(xfs_iunlock);
 
-DECLARE_EVENT_CLASS(xfs_iget_class,
+DECLARE_EVENT_CLASS(xfs_inode_class,
 	TP_PROTO(struct xfs_inode *ip),
 	TP_ARGS(ip),
 	TP_STRUCT__entry(
@@ -550,16 +555,38 @@
 		  __entry->ino)
 )
 
-#define DEFINE_IGET_EVENT(name) \
-DEFINE_EVENT(xfs_iget_class, name, \
+#define DEFINE_INODE_EVENT(name) \
+DEFINE_EVENT(xfs_inode_class, name, \
 	TP_PROTO(struct xfs_inode *ip), \
 	TP_ARGS(ip))
-DEFINE_IGET_EVENT(xfs_iget_skip);
-DEFINE_IGET_EVENT(xfs_iget_reclaim);
-DEFINE_IGET_EVENT(xfs_iget_found);
-DEFINE_IGET_EVENT(xfs_iget_alloc);
+DEFINE_INODE_EVENT(xfs_iget_skip);
+DEFINE_INODE_EVENT(xfs_iget_reclaim);
+DEFINE_INODE_EVENT(xfs_iget_reclaim_fail);
+DEFINE_INODE_EVENT(xfs_iget_hit);
+DEFINE_INODE_EVENT(xfs_iget_miss);
 
-DECLARE_EVENT_CLASS(xfs_inode_class,
+DEFINE_INODE_EVENT(xfs_getattr);
+DEFINE_INODE_EVENT(xfs_setattr);
+DEFINE_INODE_EVENT(xfs_readlink);
+DEFINE_INODE_EVENT(xfs_alloc_file_space);
+DEFINE_INODE_EVENT(xfs_free_file_space);
+DEFINE_INODE_EVENT(xfs_readdir);
+#ifdef CONFIG_XFS_POSIX_ACL
+DEFINE_INODE_EVENT(xfs_check_acl);
+#endif
+DEFINE_INODE_EVENT(xfs_vm_bmap);
+DEFINE_INODE_EVENT(xfs_file_ioctl);
+DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
+DEFINE_INODE_EVENT(xfs_ioctl_setattr);
+DEFINE_INODE_EVENT(xfs_file_fsync);
+DEFINE_INODE_EVENT(xfs_destroy_inode);
+DEFINE_INODE_EVENT(xfs_write_inode);
+DEFINE_INODE_EVENT(xfs_clear_inode);
+
+DEFINE_INODE_EVENT(xfs_dquot_dqalloc);
+DEFINE_INODE_EVENT(xfs_dquot_dqdetach);
+
+DECLARE_EVENT_CLASS(xfs_iref_class,
 	TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip),
 	TP_ARGS(ip, caller_ip),
 	TP_STRUCT__entry(
@@ -584,20 +611,71 @@
 		  (char *)__entry->caller_ip)
 )
 
-#define DEFINE_INODE_EVENT(name) \
-DEFINE_EVENT(xfs_inode_class, name, \
+#define DEFINE_IREF_EVENT(name) \
+DEFINE_EVENT(xfs_iref_class, name, \
 	TP_PROTO(struct xfs_inode *ip, unsigned long caller_ip), \
 	TP_ARGS(ip, caller_ip))
-DEFINE_INODE_EVENT(xfs_ihold);
-DEFINE_INODE_EVENT(xfs_irele);
-DEFINE_INODE_EVENT(xfs_inode_pin);
-DEFINE_INODE_EVENT(xfs_inode_unpin);
-DEFINE_INODE_EVENT(xfs_inode_unpin_nowait);
+DEFINE_IREF_EVENT(xfs_ihold);
+DEFINE_IREF_EVENT(xfs_irele);
+DEFINE_IREF_EVENT(xfs_inode_pin);
+DEFINE_IREF_EVENT(xfs_inode_unpin);
+DEFINE_IREF_EVENT(xfs_inode_unpin_nowait);
 
-/* the old xfs_itrace_entry tracer - to be replaced by s.th. in the VFS */
-DEFINE_INODE_EVENT(xfs_inode);
-#define xfs_itrace_entry(ip)    \
-	trace_xfs_inode(ip, _THIS_IP_)
+DECLARE_EVENT_CLASS(xfs_namespace_class,
+	TP_PROTO(struct xfs_inode *dp, struct xfs_name *name),
+	TP_ARGS(dp, name),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, dp_ino)
+		__dynamic_array(char, name, name->len)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(dp)->i_sb->s_dev;
+		__entry->dp_ino = dp->i_ino;
+		memcpy(__get_str(name), name->name, name->len);
+	),
+	TP_printk("dev %d:%d dp ino 0x%llx name %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->dp_ino,
+		  __get_str(name))
+)
+
+#define DEFINE_NAMESPACE_EVENT(name) \
+DEFINE_EVENT(xfs_namespace_class, name, \
+	TP_PROTO(struct xfs_inode *dp, struct xfs_name *name), \
+	TP_ARGS(dp, name))
+DEFINE_NAMESPACE_EVENT(xfs_remove);
+DEFINE_NAMESPACE_EVENT(xfs_link);
+DEFINE_NAMESPACE_EVENT(xfs_lookup);
+DEFINE_NAMESPACE_EVENT(xfs_create);
+DEFINE_NAMESPACE_EVENT(xfs_symlink);
+
+TRACE_EVENT(xfs_rename,
+	TP_PROTO(struct xfs_inode *src_dp, struct xfs_inode *target_dp,
+		 struct xfs_name *src_name, struct xfs_name *target_name),
+	TP_ARGS(src_dp, target_dp, src_name, target_name),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, src_dp_ino)
+		__field(xfs_ino_t, target_dp_ino)
+		__dynamic_array(char, src_name, src_name->len)
+		__dynamic_array(char, target_name, target_name->len)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(src_dp)->i_sb->s_dev;
+		__entry->src_dp_ino = src_dp->i_ino;
+		__entry->target_dp_ino = target_dp->i_ino;
+		memcpy(__get_str(src_name), src_name->name, src_name->len);
+		memcpy(__get_str(target_name), target_name->name, target_name->len);
+	),
+	TP_printk("dev %d:%d src dp ino 0x%llx target dp ino 0x%llx"
+		  " src name %s target name %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->src_dp_ino,
+		  __entry->target_dp_ino,
+		  __get_str(src_name),
+		  __get_str(target_name))
+)
 
 DECLARE_EVENT_CLASS(xfs_dquot_class,
 	TP_PROTO(struct xfs_dquot *dqp),
@@ -677,9 +755,6 @@
 DEFINE_DQUOT_EVENT(xfs_dqflush);
 DEFINE_DQUOT_EVENT(xfs_dqflush_force);
 DEFINE_DQUOT_EVENT(xfs_dqflush_done);
-/* not really iget events, but we re-use the format */
-DEFINE_IGET_EVENT(xfs_dquot_dqalloc);
-DEFINE_IGET_EVENT(xfs_dquot_dqdetach);
 
 DECLARE_EVENT_CLASS(xfs_loggrant_class,
 	TP_PROTO(struct log *log, struct xlog_ticket *tic),
@@ -775,165 +850,177 @@
 DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_exit);
 DEFINE_LOGGRANT_EVENT(xfs_log_ungrant_sub);
 
-#define DEFINE_RW_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags), \
-	TP_ARGS(ip, count, offset, flags), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(xfs_fsize_t, size) \
-		__field(xfs_fsize_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-		__field(int, flags) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-		__entry->flags = flags; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count 0x%zx ioflags %s", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count, \
-		  __print_flags(__entry->flags, "|", XFS_IO_FLAGS)) \
+DECLARE_EVENT_CLASS(xfs_file_class,
+	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),
+	TP_ARGS(ip, count, offset, flags),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(xfs_fsize_t, size)
+		__field(xfs_fsize_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+		__field(int, flags)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->flags = flags;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count 0x%zx ioflags %s",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count,
+		  __print_flags(__entry->flags, "|", XFS_IO_FLAGS))
 )
+
+#define DEFINE_RW_EVENT(name)		\
+DEFINE_EVENT(xfs_file_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, size_t count, loff_t offset, int flags),	\
+	TP_ARGS(ip, count, offset, flags))
 DEFINE_RW_EVENT(xfs_file_read);
 DEFINE_RW_EVENT(xfs_file_buffered_write);
 DEFINE_RW_EVENT(xfs_file_direct_write);
 DEFINE_RW_EVENT(xfs_file_splice_read);
 DEFINE_RW_EVENT(xfs_file_splice_write);
 
+DECLARE_EVENT_CLASS(xfs_page_class,
+	TP_PROTO(struct inode *inode, struct page *page, unsigned long off),
+	TP_ARGS(inode, page, off),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(pgoff_t, pgoff)
+		__field(loff_t, size)
+		__field(unsigned long, offset)
+		__field(int, delalloc)
+		__field(int, unwritten)
+	),
+	TP_fast_assign(
+		int delalloc = -1, unwritten = -1;
 
-#define DEFINE_PAGE_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct inode *inode, struct page *page, unsigned long off), \
-	TP_ARGS(inode, page, off), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(pgoff_t, pgoff) \
-		__field(loff_t, size) \
-		__field(unsigned long, offset) \
-		__field(int, delalloc) \
-		__field(int, unmapped) \
-		__field(int, unwritten) \
-	), \
-	TP_fast_assign( \
-		int delalloc = -1, unmapped = -1, unwritten = -1; \
-	\
-		if (page_has_buffers(page)) \
-			xfs_count_page_state(page, &delalloc, \
-					     &unmapped, &unwritten); \
-		__entry->dev = inode->i_sb->s_dev; \
-		__entry->ino = XFS_I(inode)->i_ino; \
-		__entry->pgoff = page_offset(page); \
-		__entry->size = i_size_read(inode); \
-		__entry->offset = off; \
-		__entry->delalloc = delalloc; \
-		__entry->unmapped = unmapped; \
-		__entry->unwritten = unwritten; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx " \
-		  "delalloc %d unmapped %d unwritten %d", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->pgoff, \
-		  __entry->size, \
-		  __entry->offset, \
-		  __entry->delalloc, \
-		  __entry->unmapped, \
-		  __entry->unwritten) \
+		if (page_has_buffers(page))
+			xfs_count_page_state(page, &delalloc, &unwritten);
+		__entry->dev = inode->i_sb->s_dev;
+		__entry->ino = XFS_I(inode)->i_ino;
+		__entry->pgoff = page_offset(page);
+		__entry->size = i_size_read(inode);
+		__entry->offset = off;
+		__entry->delalloc = delalloc;
+		__entry->unwritten = unwritten;
+	),
+	TP_printk("dev %d:%d ino 0x%llx pgoff 0x%lx size 0x%llx offset %lx "
+		  "delalloc %d unwritten %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->pgoff,
+		  __entry->size,
+		  __entry->offset,
+		  __entry->delalloc,
+		  __entry->unwritten)
 )
+
+#define DEFINE_PAGE_EVENT(name)		\
+DEFINE_EVENT(xfs_page_class, name,	\
+	TP_PROTO(struct inode *inode, struct page *page, unsigned long off),	\
+	TP_ARGS(inode, page, off))
 DEFINE_PAGE_EVENT(xfs_writepage);
 DEFINE_PAGE_EVENT(xfs_releasepage);
 DEFINE_PAGE_EVENT(xfs_invalidatepage);
 
-#define DEFINE_IOMAP_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count, \
-		 int flags, struct xfs_bmbt_irec *irec), \
-	TP_ARGS(ip, offset, count, flags, irec), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(loff_t, size) \
-		__field(loff_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-		__field(int, flags) \
-		__field(xfs_fileoff_t, startoff) \
-		__field(xfs_fsblock_t, startblock) \
-		__field(xfs_filblks_t, blockcount) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-		__entry->flags = flags; \
-		__entry->startoff = irec ? irec->br_startoff : 0; \
-		__entry->startblock = irec ? irec->br_startblock : 0; \
-		__entry->blockcount = irec ? irec->br_blockcount : 0; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count %zd flags %s " \
-		  "startoff 0x%llx startblock %lld blockcount 0x%llx", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count, \
-		  __print_flags(__entry->flags, "|", BMAPI_FLAGS), \
-		  __entry->startoff, \
-		  (__int64_t)__entry->startblock, \
-		  __entry->blockcount) \
+DECLARE_EVENT_CLASS(xfs_iomap_class,
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count,
+		 int flags, struct xfs_bmbt_irec *irec),
+	TP_ARGS(ip, offset, count, flags, irec),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(loff_t, size)
+		__field(loff_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+		__field(int, flags)
+		__field(xfs_fileoff_t, startoff)
+		__field(xfs_fsblock_t, startblock)
+		__field(xfs_filblks_t, blockcount)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+		__entry->flags = flags;
+		__entry->startoff = irec ? irec->br_startoff : 0;
+		__entry->startblock = irec ? irec->br_startblock : 0;
+		__entry->blockcount = irec ? irec->br_blockcount : 0;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count %zd flags %s "
+		  "startoff 0x%llx startblock %lld blockcount 0x%llx",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count,
+		  __print_flags(__entry->flags, "|", BMAPI_FLAGS),
+		  __entry->startoff,
+		  (__int64_t)__entry->startblock,
+		  __entry->blockcount)
 )
+
+#define DEFINE_IOMAP_EVENT(name)	\
+DEFINE_EVENT(xfs_iomap_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count,	\
+		 int flags, struct xfs_bmbt_irec *irec),		\
+	TP_ARGS(ip, offset, count, flags, irec))
 DEFINE_IOMAP_EVENT(xfs_iomap_enter);
 DEFINE_IOMAP_EVENT(xfs_iomap_found);
 DEFINE_IOMAP_EVENT(xfs_iomap_alloc);
 
-#define DEFINE_SIMPLE_IO_EVENT(name) \
-TRACE_EVENT(name, \
-	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count), \
-	TP_ARGS(ip, offset, count), \
-	TP_STRUCT__entry( \
-		__field(dev_t, dev) \
-		__field(xfs_ino_t, ino) \
-		__field(loff_t, size) \
-		__field(loff_t, new_size) \
-		__field(loff_t, offset) \
-		__field(size_t, count) \
-	), \
-	TP_fast_assign( \
-		__entry->dev = VFS_I(ip)->i_sb->s_dev; \
-		__entry->ino = ip->i_ino; \
-		__entry->size = ip->i_d.di_size; \
-		__entry->new_size = ip->i_new_size; \
-		__entry->offset = offset; \
-		__entry->count = count; \
-	), \
-	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx " \
-		  "offset 0x%llx count %zd", \
-		  MAJOR(__entry->dev), MINOR(__entry->dev), \
-		  __entry->ino, \
-		  __entry->size, \
-		  __entry->new_size, \
-		  __entry->offset, \
-		  __entry->count) \
+DECLARE_EVENT_CLASS(xfs_simple_io_class,
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count),
+	TP_ARGS(ip, offset, count),
+	TP_STRUCT__entry(
+		__field(dev_t, dev)
+		__field(xfs_ino_t, ino)
+		__field(loff_t, size)
+		__field(loff_t, new_size)
+		__field(loff_t, offset)
+		__field(size_t, count)
+	),
+	TP_fast_assign(
+		__entry->dev = VFS_I(ip)->i_sb->s_dev;
+		__entry->ino = ip->i_ino;
+		__entry->size = ip->i_d.di_size;
+		__entry->new_size = ip->i_new_size;
+		__entry->offset = offset;
+		__entry->count = count;
+	),
+	TP_printk("dev %d:%d ino 0x%llx size 0x%llx new_size 0x%llx "
+		  "offset 0x%llx count %zd",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->ino,
+		  __entry->size,
+		  __entry->new_size,
+		  __entry->offset,
+		  __entry->count)
 );
+
+#define DEFINE_SIMPLE_IO_EVENT(name)	\
+DEFINE_EVENT(xfs_simple_io_class, name,	\
+	TP_PROTO(struct xfs_inode *ip, xfs_off_t offset, ssize_t count),	\
+	TP_ARGS(ip, offset, count))
 DEFINE_SIMPLE_IO_EVENT(xfs_delalloc_enospc);
 DEFINE_SIMPLE_IO_EVENT(xfs_unwritten_convert);
 
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 585e763..e1a2f68 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -64,8 +54,6 @@
    flush lock - ditto.
 */
 
-STATIC void		xfs_qm_dqflush_done(xfs_buf_t *, xfs_dq_logitem_t *);
-
 #ifdef DEBUG
 xfs_buftarg_t *xfs_dqerror_target;
 int xfs_do_dqerror;
@@ -390,21 +378,14 @@
 		return (ESRCH);
 	}
 
-	/*
-	 * xfs_trans_commit normally decrements the vnode ref count
-	 * when it unlocks the inode. Since we want to keep the quota
-	 * inode around, we bump the vnode ref count now.
-	 */
-	IHOLD(quotip);
-
-	xfs_trans_ijoin(tp, quotip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, quotip, XFS_ILOCK_EXCL);
 	nmaps = 1;
 	if ((error = xfs_bmapi(tp, quotip,
 			      offset_fsb, XFS_DQUOT_CLUSTER_SIZE_FSB,
 			      XFS_BMAPI_METADATA | XFS_BMAPI_WRITE,
 			      &firstblock,
 			      XFS_QM_DQALLOC_SPACE_RES(mp),
-			      &map, &nmaps, &flist, NULL))) {
+			      &map, &nmaps, &flist))) {
 		goto error0;
 	}
 	ASSERT(map.br_blockcount == XFS_DQUOT_CLUSTER_SIZE_FSB);
@@ -520,7 +501,7 @@
 		error = xfs_bmapi(NULL, quotip, dqp->q_fileoffset,
 				  XFS_DQUOT_CLUSTER_SIZE_FSB,
 				  XFS_BMAPI_METADATA,
-				  NULL, 0, &map, &nmaps, NULL, NULL);
+				  NULL, 0, &map, &nmaps, NULL);
 
 		xfs_iunlock(quotip, XFS_ILOCK_SHARED);
 		if (error)
@@ -1141,6 +1122,46 @@
 	xfs_qm_dqput(dqp);
 }
 
+/*
+ * This is the dquot flushing I/O completion routine.  It is called
+ * from interrupt level when the buffer containing the dquot is
+ * flushed to disk.  It is responsible for removing the dquot logitem
+ * from the AIL if it has not been re-logged, and unlocking the dquot's
+ * flush lock. This behavior is very similar to that of inodes..
+ */
+STATIC void
+xfs_qm_dqflush_done(
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
+{
+	xfs_dq_logitem_t	*qip = (struct xfs_dq_logitem *)lip;
+	xfs_dquot_t		*dqp = qip->qli_dquot;
+	struct xfs_ail		*ailp = lip->li_ailp;
+
+	/*
+	 * We only want to pull the item from the AIL if its
+	 * location in the log has not changed since we started the flush.
+	 * Thus, we only bother if the dquot's lsn has
+	 * not changed. First we check the lsn outside the lock
+	 * since it's cheaper, and then we recheck while
+	 * holding the lock before removing the dquot from the AIL.
+	 */
+	if ((lip->li_flags & XFS_LI_IN_AIL) &&
+	    lip->li_lsn == qip->qli_flush_lsn) {
+
+		/* xfs_trans_ail_delete() drops the AIL lock. */
+		spin_lock(&ailp->xa_lock);
+		if (lip->li_lsn == qip->qli_flush_lsn)
+			xfs_trans_ail_delete(ailp, lip);
+		else
+			spin_unlock(&ailp->xa_lock);
+	}
+
+	/*
+	 * Release the dq's flush lock since we're done with it.
+	 */
+	xfs_dqfunlock(dqp);
+}
 
 /*
  * Write a modified dquot to disk.
@@ -1222,8 +1243,9 @@
 	 * Attach an iodone routine so that we can remove this dquot from the
 	 * AIL and release the flush lock once the dquot is synced to disk.
 	 */
-	xfs_buf_attach_iodone(bp, (void(*)(xfs_buf_t *, xfs_log_item_t *))
-			      xfs_qm_dqflush_done, &(dqp->q_logitem.qli_item));
+	xfs_buf_attach_iodone(bp, xfs_qm_dqflush_done,
+				  &dqp->q_logitem.qli_item);
+
 	/*
 	 * If the buffer is pinned then push on the log so we won't
 	 * get stuck waiting in the write for too long.
@@ -1247,50 +1269,6 @@
 
 }
 
-/*
- * This is the dquot flushing I/O completion routine.  It is called
- * from interrupt level when the buffer containing the dquot is
- * flushed to disk.  It is responsible for removing the dquot logitem
- * from the AIL if it has not been re-logged, and unlocking the dquot's
- * flush lock. This behavior is very similar to that of inodes..
- */
-/*ARGSUSED*/
-STATIC void
-xfs_qm_dqflush_done(
-	xfs_buf_t		*bp,
-	xfs_dq_logitem_t	*qip)
-{
-	xfs_dquot_t		*dqp;
-	struct xfs_ail		*ailp;
-
-	dqp = qip->qli_dquot;
-	ailp = qip->qli_item.li_ailp;
-
-	/*
-	 * We only want to pull the item from the AIL if its
-	 * location in the log has not changed since we started the flush.
-	 * Thus, we only bother if the dquot's lsn has
-	 * not changed. First we check the lsn outside the lock
-	 * since it's cheaper, and then we recheck while
-	 * holding the lock before removing the dquot from the AIL.
-	 */
-	if ((qip->qli_item.li_flags & XFS_LI_IN_AIL) &&
-	    qip->qli_item.li_lsn == qip->qli_flush_lsn) {
-
-		/* xfs_trans_ail_delete() drops the AIL lock. */
-		spin_lock(&ailp->xa_lock);
-		if (qip->qli_item.li_lsn == qip->qli_flush_lsn)
-			xfs_trans_ail_delete(ailp, (xfs_log_item_t*)qip);
-		else
-			spin_unlock(&ailp->xa_lock);
-	}
-
-	/*
-	 * Release the dq's flush lock since we're done with it.
-	 */
-	xfs_dqfunlock(dqp);
-}
-
 int
 xfs_qm_dqlock_nowait(
 	xfs_dquot_t *dqp)
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 8d89a24..2a1f3dc 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -23,42 +23,36 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_itable.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
 #include "xfs_qm.h"
 
+static inline struct xfs_dq_logitem *DQUOT_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_dq_logitem, qli_item);
+}
+
 /*
  * returns the number of iovecs needed to log the given dquot item.
  */
-/* ARGSUSED */
 STATIC uint
 xfs_qm_dquot_logitem_size(
-	xfs_dq_logitem_t	*logitem)
+	struct xfs_log_item	*lip)
 {
 	/*
 	 * we need only two iovecs, one for the format, one for the real thing
 	 */
-	return (2);
+	return 2;
 }
 
 /*
@@ -66,22 +60,21 @@
  */
 STATIC void
 xfs_qm_dquot_logitem_format(
-	xfs_dq_logitem_t	*logitem,
-	xfs_log_iovec_t		*logvec)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*logvec)
 {
-	ASSERT(logitem);
-	ASSERT(logitem->qli_dquot);
+	struct xfs_dq_logitem	*qlip = DQUOT_ITEM(lip);
 
-	logvec->i_addr = (xfs_caddr_t)&logitem->qli_format;
+	logvec->i_addr = &qlip->qli_format;
 	logvec->i_len  = sizeof(xfs_dq_logformat_t);
 	logvec->i_type = XLOG_REG_TYPE_QFORMAT;
 	logvec++;
-	logvec->i_addr = (xfs_caddr_t)&logitem->qli_dquot->q_core;
+	logvec->i_addr = &qlip->qli_dquot->q_core;
 	logvec->i_len  = sizeof(xfs_disk_dquot_t);
 	logvec->i_type = XLOG_REG_TYPE_DQUOT;
 
-	ASSERT(2 == logitem->qli_item.li_desc->lid_size);
-	logitem->qli_format.qlf_size = 2;
+	ASSERT(2 == lip->li_desc->lid_size);
+	qlip->qli_format.qlf_size = 2;
 
 }
 
@@ -90,9 +83,9 @@
  */
 STATIC void
 xfs_qm_dquot_logitem_pin(
-	xfs_dq_logitem_t *logitem)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t *dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	atomic_inc(&dqp->q_pincount);
@@ -104,27 +97,18 @@
  * dquot must have been previously pinned with a call to
  * xfs_qm_dquot_logitem_pin().
  */
-/* ARGSUSED */
 STATIC void
 xfs_qm_dquot_logitem_unpin(
-	xfs_dq_logitem_t *logitem)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	xfs_dquot_t *dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
 	ASSERT(atomic_read(&dqp->q_pincount) > 0);
 	if (atomic_dec_and_test(&dqp->q_pincount))
 		wake_up(&dqp->q_pinwait);
 }
 
-/* ARGSUSED */
-STATIC void
-xfs_qm_dquot_logitem_unpin_remove(
-	xfs_dq_logitem_t *logitem,
-	xfs_trans_t	 *tp)
-{
-	xfs_qm_dquot_logitem_unpin(logitem);
-}
-
 /*
  * Given the logitem, this writes the corresponding dquot entry to disk
  * asynchronously. This is called with the dquot entry securely locked;
@@ -133,12 +117,10 @@
  */
 STATIC void
 xfs_qm_dquot_logitem_push(
-	xfs_dq_logitem_t	*logitem)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
-	int		error;
-
-	dqp = logitem->qli_dquot;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
+	int			error;
 
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	ASSERT(!completion_done(&dqp->q_flush));
@@ -160,27 +142,25 @@
 	xfs_dqunlock(dqp);
 }
 
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_qm_dquot_logitem_committed(
-	xfs_dq_logitem_t	*l,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
 	/*
 	 * We always re-log the entire dquot when it becomes dirty,
 	 * so, the latest copy _is_ the only one that matters.
 	 */
-	return (lsn);
+	return lsn;
 }
 
-
 /*
  * This is called to wait for the given dquot to be unpinned.
  * Most of these pin/unpin routines are plagiarized from inode code.
  */
 void
 xfs_qm_dqunpin_wait(
-	xfs_dquot_t	*dqp)
+	struct xfs_dquot	*dqp)
 {
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 	if (atomic_read(&dqp->q_pincount) == 0)
@@ -206,13 +186,12 @@
  */
 STATIC void
 xfs_qm_dquot_logitem_pushbuf(
-	xfs_dq_logitem_t    *qip)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
-	xfs_mount_t	*mp;
-	xfs_buf_t	*bp;
+	struct xfs_dq_logitem	*qlip = DQUOT_ITEM(lip);
+	struct xfs_dquot	*dqp = qlip->qli_dquot;
+	struct xfs_buf		*bp;
 
-	dqp = qip->qli_dquot;
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
 	/*
@@ -220,22 +199,20 @@
 	 * inode flush completed and the inode was taken off the AIL.
 	 * So, just get out.
 	 */
-	if (completion_done(&dqp->q_flush)  ||
-	    ((qip->qli_item.li_flags & XFS_LI_IN_AIL) == 0)) {
+	if (completion_done(&dqp->q_flush) ||
+	    !(lip->li_flags & XFS_LI_IN_AIL)) {
 		xfs_dqunlock(dqp);
 		return;
 	}
-	mp = dqp->q_mount;
-	bp = xfs_incore(mp->m_ddev_targp, qip->qli_format.qlf_blkno,
-			mp->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
+
+	bp = xfs_incore(dqp->q_mount->m_ddev_targp, qlip->qli_format.qlf_blkno,
+			dqp->q_mount->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
 	xfs_dqunlock(dqp);
 	if (!bp)
 		return;
 	if (XFS_BUF_ISDELAYWRITE(bp))
 		xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
-	return;
-
 }
 
 /*
@@ -250,15 +227,14 @@
  */
 STATIC uint
 xfs_qm_dquot_logitem_trylock(
-	xfs_dq_logitem_t	*qip)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t		*dqp;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
-	dqp = qip->qli_dquot;
 	if (atomic_read(&dqp->q_pincount) > 0)
 		return XFS_ITEM_PINNED;
 
-	if (! xfs_qm_dqlock_nowait(dqp))
+	if (!xfs_qm_dqlock_nowait(dqp))
 		return XFS_ITEM_LOCKED;
 
 	if (!xfs_dqflock_nowait(dqp)) {
@@ -269,11 +245,10 @@
 		return XFS_ITEM_PUSHBUF;
 	}
 
-	ASSERT(qip->qli_item.li_flags & XFS_LI_IN_AIL);
+	ASSERT(lip->li_flags & XFS_LI_IN_AIL);
 	return XFS_ITEM_SUCCESS;
 }
 
-
 /*
  * Unlock the dquot associated with the log item.
  * Clear the fields of the dquot and dquot log item that
@@ -282,12 +257,10 @@
  */
 STATIC void
 xfs_qm_dquot_logitem_unlock(
-	xfs_dq_logitem_t    *ql)
+	struct xfs_log_item	*lip)
 {
-	xfs_dquot_t	*dqp;
+	struct xfs_dquot	*dqp = DQUOT_ITEM(lip)->qli_dquot;
 
-	ASSERT(ql != NULL);
-	dqp = ql->qli_dquot;
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
 	/*
@@ -304,43 +277,32 @@
 	xfs_dqunlock(dqp);
 }
 
-
 /*
  * this needs to stamp an lsn into the dquot, I think.
  * rpc's that look at user dquot's would then have to
  * push on the dependency recorded in the dquot
  */
-/* ARGSUSED */
 STATIC void
 xfs_qm_dquot_logitem_committing(
-	xfs_dq_logitem_t	*l,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	return;
 }
 
-
 /*
  * This is the ops vector for dquots
  */
 static struct xfs_item_ops xfs_dquot_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_dquot_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_qm_dquot_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))
-					xfs_qm_dquot_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_dquot_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_dquot_logitem_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))
-					xfs_qm_dquot_logitem_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_dquot_logitem_committing
+	.iop_size	= xfs_qm_dquot_logitem_size,
+	.iop_format	= xfs_qm_dquot_logitem_format,
+	.iop_pin	= xfs_qm_dquot_logitem_pin,
+	.iop_unpin	= xfs_qm_dquot_logitem_unpin,
+	.iop_trylock	= xfs_qm_dquot_logitem_trylock,
+	.iop_unlock	= xfs_qm_dquot_logitem_unlock,
+	.iop_committed	= xfs_qm_dquot_logitem_committed,
+	.iop_push	= xfs_qm_dquot_logitem_push,
+	.iop_pushbuf	= xfs_qm_dquot_logitem_pushbuf,
+	.iop_committing = xfs_qm_dquot_logitem_committing
 };
 
 /*
@@ -350,10 +312,9 @@
  */
 void
 xfs_qm_dquot_logitem_init(
-	struct xfs_dquot *dqp)
+	struct xfs_dquot	*dqp)
 {
-	xfs_dq_logitem_t  *lp;
-	lp = &dqp->q_logitem;
+	struct xfs_dq_logitem	*lp = &dqp->q_logitem;
 
 	xfs_log_item_init(dqp->q_mount, &lp->qli_item, XFS_LI_DQUOT,
 					&xfs_dquot_item_ops);
@@ -374,16 +335,22 @@
 
 /*------------------  QUOTAOFF LOG ITEMS  -------------------*/
 
+static inline struct xfs_qoff_logitem *QOFF_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_qoff_logitem, qql_item);
+}
+
+
 /*
  * This returns the number of iovecs needed to log the given quotaoff item.
  * We only need 1 iovec for an quotaoff item.  It just logs the
  * quotaoff_log_format structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_qm_qoff_logitem_size(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_size(
+	struct xfs_log_item	*lip)
 {
-	return (1);
+	return 1;
 }
 
 /*
@@ -394,53 +361,46 @@
  * slots in the quotaoff item have been filled.
  */
 STATIC void
-xfs_qm_qoff_logitem_format(xfs_qoff_logitem_t	*qf,
-			   xfs_log_iovec_t	*log_vector)
+xfs_qm_qoff_logitem_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	ASSERT(qf->qql_format.qf_type == XFS_LI_QUOTAOFF);
+	struct xfs_qoff_logitem	*qflip = QOFF_ITEM(lip);
 
-	log_vector->i_addr = (xfs_caddr_t)&(qf->qql_format);
+	ASSERT(qflip->qql_format.qf_type == XFS_LI_QUOTAOFF);
+
+	log_vector->i_addr = &qflip->qql_format;
 	log_vector->i_len = sizeof(xfs_qoff_logitem_t);
 	log_vector->i_type = XLOG_REG_TYPE_QUOTAOFF;
-	qf->qql_format.qf_size = 1;
+	qflip->qql_format.qf_size = 1;
 }
 
-
 /*
  * Pinning has no meaning for an quotaoff item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_pin(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * Since pinning has no meaning for an quotaoff item, unpinning does
  * not either.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_unpin(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	return;
-}
-
-/*ARGSUSED*/
-STATIC void
-xfs_qm_qoff_logitem_unpin_remove(xfs_qoff_logitem_t *qf, xfs_trans_t *tp)
-{
-	return;
 }
 
 /*
  * Quotaoff items have no locking, so just return success.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_qm_qoff_logitem_trylock(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_LOCKED;
 }
@@ -449,53 +409,51 @@
  * Quotaoff items have no locking or pushing, so return failure
  * so that the caller doesn't bother with us.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_unlock(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_unlock(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
  * The quotaoff-start-item is logged only once and cannot be moved in the log,
  * so simply return the lsn at which it's been logged.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_qm_qoff_logitem_committed(xfs_qoff_logitem_t *qf, xfs_lsn_t lsn)
+xfs_qm_qoff_logitem_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return (lsn);
+	return lsn;
 }
 
 /*
  * There isn't much you can do to push on an quotaoff item.  It is simply
  * stuck waiting for the log to be flushed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_qm_qoff_logitem_push(xfs_qoff_logitem_t *qf)
+xfs_qm_qoff_logitem_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_qm_qoffend_logitem_committed(
-	xfs_qoff_logitem_t *qfe,
-	xfs_lsn_t lsn)
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	xfs_qoff_logitem_t	*qfs;
-	struct xfs_ail		*ailp;
+	struct xfs_qoff_logitem	*qfe = QOFF_ITEM(lip);
+	struct xfs_qoff_logitem	*qfs = qfe->qql_start_lip;
+	struct xfs_ail		*ailp = qfs->qql_item.li_ailp;
 
-	qfs = qfe->qql_start_lip;
-	ailp = qfs->qql_item.li_ailp;
-	spin_lock(&ailp->xa_lock);
 	/*
 	 * Delete the qoff-start logitem from the AIL.
 	 * xfs_trans_ail_delete() drops the AIL lock.
 	 */
+	spin_lock(&ailp->xa_lock);
 	xfs_trans_ail_delete(ailp, (xfs_log_item_t *)qfs);
+
 	kmem_free(qfs);
 	kmem_free(qfe);
 	return (xfs_lsn_t)-1;
@@ -515,71 +473,52 @@
  * (truly makes the quotaoff irrevocable).  If we do something else,
  * then maybe we don't need two.
  */
-/* ARGSUSED */
 STATIC void
-xfs_qm_qoff_logitem_committing(xfs_qoff_logitem_t *qip, xfs_lsn_t commit_lsn)
+xfs_qm_qoff_logitem_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		commit_lsn)
 {
-	return;
-}
-
-/* ARGSUSED */
-STATIC void
-xfs_qm_qoffend_logitem_committing(xfs_qoff_logitem_t *qip, xfs_lsn_t commit_lsn)
-{
-	return;
 }
 
 static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_qoff_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*,xfs_trans_t*))
-					xfs_qm_qoff_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoffend_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoffend_logitem_committing
+	.iop_size	= xfs_qm_qoff_logitem_size,
+	.iop_format	= xfs_qm_qoff_logitem_format,
+	.iop_pin	= xfs_qm_qoff_logitem_pin,
+	.iop_unpin	= xfs_qm_qoff_logitem_unpin,
+	.iop_trylock	= xfs_qm_qoff_logitem_trylock,
+	.iop_unlock	= xfs_qm_qoff_logitem_unlock,
+	.iop_committed	= xfs_qm_qoffend_logitem_committed,
+	.iop_push	= xfs_qm_qoff_logitem_push,
+	.iop_committing = xfs_qm_qoff_logitem_committing
 };
 
 /*
  * This is the ops vector shared by all quotaoff-start log items.
  */
 static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_qm_qoff_logitem_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*,xfs_trans_t*))
-					xfs_qm_qoff_logitem_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoff_logitem_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_qm_qoff_logitem_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_qm_qoff_logitem_committing
+	.iop_size	= xfs_qm_qoff_logitem_size,
+	.iop_format	= xfs_qm_qoff_logitem_format,
+	.iop_pin	= xfs_qm_qoff_logitem_pin,
+	.iop_unpin	= xfs_qm_qoff_logitem_unpin,
+	.iop_trylock	= xfs_qm_qoff_logitem_trylock,
+	.iop_unlock	= xfs_qm_qoff_logitem_unlock,
+	.iop_committed	= xfs_qm_qoff_logitem_committed,
+	.iop_push	= xfs_qm_qoff_logitem_push,
+	.iop_committing = xfs_qm_qoff_logitem_committing
 };
 
 /*
  * Allocate and initialize an quotaoff item of the correct quota type(s).
  */
-xfs_qoff_logitem_t *
+struct xfs_qoff_logitem *
 xfs_qm_qoff_logitem_init(
-	struct xfs_mount *mp,
-	xfs_qoff_logitem_t *start,
-	uint flags)
+	struct xfs_mount	*mp,
+	struct xfs_qoff_logitem	*start,
+	uint			flags)
 {
-	xfs_qoff_logitem_t	*qf;
+	struct xfs_qoff_logitem	*qf;
 
-	qf = (xfs_qoff_logitem_t*) kmem_zalloc(sizeof(xfs_qoff_logitem_t), KM_SLEEP);
+	qf = kmem_zalloc(sizeof(struct xfs_qoff_logitem), KM_SLEEP);
 
 	xfs_log_item_init(mp, &qf->qql_item, XFS_LI_QUOTAOFF, start ?
 			&xfs_qm_qoffend_logitem_ops : &xfs_qm_qoff_logitem_ops);
@@ -587,5 +526,5 @@
 	qf->qql_format.qf_type = XFS_LI_QUOTAOFF;
 	qf->qql_format.qf_flags = flags;
 	qf->qql_start_lip = start;
-	return (qf);
+	return qf;
 }
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 38e7641..9a92407 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -23,25 +23,18 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
 #include "xfs_bmap.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_space.h"
@@ -69,7 +62,7 @@
 
 STATIC int	xfs_qm_init_quotainos(xfs_mount_t *);
 STATIC int	xfs_qm_init_quotainfo(xfs_mount_t *);
-STATIC int	xfs_qm_shake(int, gfp_t);
+STATIC int	xfs_qm_shake(struct shrinker *, int, gfp_t);
 
 static struct shrinker xfs_qm_shaker = {
 	.shrink = xfs_qm_shake,
@@ -249,8 +242,10 @@
 
 	if (!xfs_Gqm) {
 		xfs_Gqm = xfs_Gqm_init();
-		if (!xfs_Gqm)
+		if (!xfs_Gqm) {
+			mutex_unlock(&xfs_Gqm_lock);
 			return ENOMEM;
+		}
 	}
 
 	/*
@@ -1495,7 +1490,7 @@
 				  maxlblkcnt - lblkno,
 				  XFS_BMAPI_METADATA,
 				  NULL,
-				  0, map, &nmaps, NULL, NULL);
+				  0, map, &nmaps, NULL);
 		xfs_iunlock(qip, XFS_ILOCK_SHARED);
 		if (error)
 			break;
@@ -1630,10 +1625,7 @@
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* not used */
 	int		ubsize,		/* not used */
-	void		*private_data,	/* not used */
-	xfs_daddr_t	bno,		/* starting block of inode cluster */
 	int		*ubused,	/* not used */
-	void		*dip,		/* on-disk inode pointer (not used) */
 	int		*res)		/* result code value */
 {
 	xfs_inode_t	*ip;
@@ -1658,7 +1650,7 @@
 	 * the case in all other instances. It's OK that we do this because
 	 * quotacheck is done only at mount time.
 	 */
-	if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip, bno))) {
+	if ((error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_EXCL, &ip))) {
 		*res = BULKSTAT_RV_NOTHING;
 		return error;
 	}
@@ -1670,7 +1662,8 @@
 	 * making us disable quotas for the file system.
 	 */
 	if ((error = xfs_qm_dqget_noattach(ip, &udqp, &gdqp))) {
-		xfs_iput(ip, XFS_ILOCK_EXCL);
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+		IRELE(ip);
 		*res = BULKSTAT_RV_GIVEUP;
 		return error;
 	}
@@ -1683,7 +1676,8 @@
 		 * Walk thru the extent list and count the realtime blocks.
 		 */
 		if ((error = xfs_qm_get_rtblks(ip, &rtblks))) {
-			xfs_iput(ip, XFS_ILOCK_EXCL);
+			xfs_iunlock(ip, XFS_ILOCK_EXCL);
+			IRELE(ip);
 			if (udqp)
 				xfs_qm_dqput(udqp);
 			if (gdqp)
@@ -1794,12 +1788,13 @@
 		 * Iterate thru all the inodes in the file system,
 		 * adjusting the corresponding dquot counters in core.
 		 */
-		if ((error = xfs_bulkstat(mp, &lastino, &count,
-				     xfs_qm_dqusage_adjust, NULL,
-				     structsz, NULL, BULKSTAT_FG_IGET, &done)))
+		error = xfs_bulkstat(mp, &lastino, &count,
+				     xfs_qm_dqusage_adjust,
+				     structsz, NULL, &done);
+		if (error)
 			break;
 
-	} while (! done);
+	} while (!done);
 
 	/*
 	 * We've made all the changes that we need to make incore.
@@ -1887,14 +1882,14 @@
 		    mp->m_sb.sb_uquotino != NULLFSINO) {
 			ASSERT(mp->m_sb.sb_uquotino > 0);
 			if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
-					     0, 0, &uip, 0)))
+					     0, 0, &uip)))
 				return XFS_ERROR(error);
 		}
 		if (XFS_IS_OQUOTA_ON(mp) &&
 		    mp->m_sb.sb_gquotino != NULLFSINO) {
 			ASSERT(mp->m_sb.sb_gquotino > 0);
 			if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
-					     0, 0, &gip, 0))) {
+					     0, 0, &gip))) {
 				if (uip)
 					IRELE(uip);
 				return XFS_ERROR(error);
@@ -2117,7 +2112,10 @@
  */
 /* ARGSUSED */
 STATIC int
-xfs_qm_shake(int nr_to_scan, gfp_t gfp_mask)
+xfs_qm_shake(
+	struct shrinker	*shrink,
+	int		nr_to_scan,
+	gfp_t		gfp_mask)
 {
 	int	ndqused, nfree, n;
 
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 97b410c..bea02d7 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/quota/xfs_qm_stats.c
index 3d1fc79..8671a0b 100644
--- a/fs/xfs/quota/xfs_qm_stats.c
+++ b/fs/xfs/quota/xfs_qm_stats.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_qm.h"
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 92b002f..d257eb8 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -26,25 +26,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
@@ -248,40 +238,74 @@
 	return error;
 }
 
+STATIC int
+xfs_qm_scall_trunc_qfile(
+	struct xfs_mount	*mp,
+	xfs_ino_t		ino)
+{
+	struct xfs_inode	*ip;
+	struct xfs_trans	*tp;
+	int			error;
+
+	if (ino == NULLFSINO)
+		return 0;
+
+	error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
+	if (error)
+		return error;
+
+	xfs_ilock(ip, XFS_IOLOCK_EXCL);
+
+	tp = xfs_trans_alloc(mp, XFS_TRANS_TRUNCATE_FILE);
+	error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
+				  XFS_TRANS_PERM_LOG_RES,
+				  XFS_ITRUNCATE_LOG_COUNT);
+	if (error) {
+		xfs_trans_cancel(tp, 0);
+		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
+		goto out_put;
+	}
+
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin(tp, ip);
+
+	error = xfs_itruncate_finish(&tp, ip, 0, XFS_DATA_FORK, 1);
+	if (error) {
+		xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
+				     XFS_TRANS_ABORT);
+		goto out_unlock;
+	}
+
+	xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+
+out_unlock:
+	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+out_put:
+	IRELE(ip);
+	return error;
+}
+
 int
 xfs_qm_scall_trunc_qfiles(
 	xfs_mount_t	*mp,
 	uint		flags)
 {
 	int		error = 0, error2 = 0;
-	xfs_inode_t	*qip;
 
 	if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) {
 		qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags);
 		return XFS_ERROR(EINVAL);
 	}
 
-	if ((flags & XFS_DQ_USER) && mp->m_sb.sb_uquotino != NULLFSINO) {
-		error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino, 0, 0, &qip, 0);
-		if (!error) {
-			error = xfs_truncate_file(mp, qip);
-			IRELE(qip);
-		}
-	}
-
-	if ((flags & (XFS_DQ_GROUP|XFS_DQ_PROJ)) &&
-	    mp->m_sb.sb_gquotino != NULLFSINO) {
-		error2 = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip, 0);
-		if (!error2) {
-			error2 = xfs_truncate_file(mp, qip);
-			IRELE(qip);
-		}
-	}
+	if (flags & XFS_DQ_USER)
+		error = xfs_qm_scall_trunc_qfile(mp, mp->m_sb.sb_uquotino);
+	if (flags & (XFS_DQ_GROUP|XFS_DQ_PROJ))
+		error2 = xfs_qm_scall_trunc_qfile(mp, mp->m_sb.sb_gquotino);
 
 	return error ? error : error2;
 }
 
-
 /*
  * Switch on (a given) quota enforcement for a filesystem.  This takes
  * effect immediately.
@@ -417,12 +441,12 @@
 	}
 	if (!uip && mp->m_sb.sb_uquotino != NULLFSINO) {
 		if (xfs_iget(mp, NULL, mp->m_sb.sb_uquotino,
-					0, 0, &uip, 0) == 0)
+					0, 0, &uip) == 0)
 			tempuqip = B_TRUE;
 	}
 	if (!gip && mp->m_sb.sb_gquotino != NULLFSINO) {
 		if (xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
-					0, 0, &gip, 0) == 0)
+					0, 0, &gip) == 0)
 			tempgqip = B_TRUE;
 	}
 	if (uip) {
@@ -875,8 +899,9 @@
 		xfs_qm_dqrele(ip->i_gdquot);
 		ip->i_gdquot = NULL;
 	}
-	xfs_iput(ip, XFS_ILOCK_EXCL);
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 
+	IRELE(ip);
 	return 0;
 }
 
@@ -1109,10 +1134,7 @@
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* not used */
 	int		ubsize,		/* not used */
-	void		*private_data,	/* not used */
-	xfs_daddr_t	bno,		/* starting block of inode cluster */
 	int		*ubused,	/* not used */
-	void		*dip,		/* not used */
 	int		*res)		/* bulkstat result code */
 {
 	xfs_inode_t		*ip;
@@ -1134,7 +1156,7 @@
 	ipreleased = B_FALSE;
  again:
 	lock_flags = XFS_ILOCK_SHARED;
-	if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip, bno))) {
+	if ((error = xfs_iget(mp, NULL, ino, 0, lock_flags, &ip))) {
 		*res = BULKSTAT_RV_NOTHING;
 		return (error);
 	}
@@ -1146,7 +1168,8 @@
 	 * of those now.
 	 */
 	if (! ipreleased) {
-		xfs_iput(ip, lock_flags);
+		xfs_iunlock(ip, lock_flags);
+		IRELE(ip);
 		ipreleased = B_TRUE;
 		goto again;
 	}
@@ -1163,7 +1186,8 @@
 		ASSERT(gd);
 		xfs_qm_internalqcheck_dqadjust(ip, gd);
 	}
-	xfs_iput(ip, lock_flags);
+	xfs_iunlock(ip, lock_flags);
+	IRELE(ip);
 	*res = BULKSTAT_RV_DIDONE;
 	return (0);
 }
@@ -1205,15 +1229,15 @@
 		 * Iterate thru all the inodes in the file system,
 		 * adjusting the corresponding dquot counters
 		 */
-		if ((error = xfs_bulkstat(mp, &lastino, &count,
-				 xfs_qm_internalqcheck_adjust, NULL,
-				 0, NULL, BULKSTAT_FG_IGET, &done))) {
+		error = xfs_bulkstat(mp, &lastino, &count,
+				 xfs_qm_internalqcheck_adjust,
+				 0, NULL, &done);
+		if (error) {
+			cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
 			break;
 		}
-	} while (! done);
-	if (error) {
-		cmn_err(CE_DEBUG, "Bulkstat returned error 0x%x", error);
-	}
+	} while (!done);
+
 	cmn_err(CE_DEBUG, "Checking results against system dquots");
 	for (i = 0; i < qmtest_hashmask; i++) {
 		xfs_dqtest_t	*d, *n;
diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/quota/xfs_trans_dquot.c
index 061d827..7de91d1 100644
--- a/fs/xfs/quota/xfs_trans_dquot.c
+++ b/fs/xfs/quota/xfs_trans_dquot.c
@@ -23,25 +23,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -59,16 +49,14 @@
 	xfs_trans_t	*tp,
 	xfs_dquot_t	*dqp)
 {
-	xfs_dq_logitem_t    *lp = &dqp->q_logitem;
-
 	ASSERT(dqp->q_transp != tp);
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
-	ASSERT(lp->qli_dquot == dqp);
+	ASSERT(dqp->q_logitem.qli_dquot == dqp);
 
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)(lp));
+	xfs_trans_add_item(tp, &dqp->q_logitem.qli_item);
 
 	/*
 	 * Initialize i_transp so we can later determine if this dquot is
@@ -93,16 +81,11 @@
 	xfs_trans_t	*tp,
 	xfs_dquot_t	*dqp)
 {
-	xfs_log_item_desc_t	*lidp;
-
 	ASSERT(dqp->q_transp == tp);
 	ASSERT(XFS_DQ_IS_LOCKED(dqp));
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)(&dqp->q_logitem));
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	dqp->q_logitem.qli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 }
 
 /*
@@ -874,9 +857,8 @@
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)q);
-
-	return (q);
+	xfs_trans_add_item(tp, &q->qql_item);
+	return q;
 }
 
 
@@ -890,13 +872,8 @@
 	xfs_trans_t		*tp,
 	xfs_qoff_logitem_t	*qlp)
 {
-	xfs_log_item_desc_t	*lidp;
-
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t *)qlp);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	qlp->qql_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 }
 
 STATIC void
diff --git a/fs/xfs/support/debug.c b/fs/xfs/support/debug.c
index 3f3610a..975aa10 100644
--- a/fs/xfs/support/debug.c
+++ b/fs/xfs/support/debug.c
@@ -22,7 +22,6 @@
 #include "xfs_sb.h"
 #include "xfs_inum.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index 401f364..4917d4e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -227,7 +227,6 @@
 
 	atomic_t        pagf_fstrms;    /* # of filestreams active in this AG */
 
-	int		pag_ici_init;	/* incore inode cache initialised */
 	rwlock_t	pag_ici_lock;	/* incore inode lock */
 	struct radix_tree_root pag_ici_root;	/* incore inode cache root */
 	int		pag_ici_reclaimable;	/* reclaimable inodes */
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index a7fbe8a..af168fa 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -24,18 +24,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
@@ -688,8 +683,6 @@
 	xfs_agblock_t	ltbno;		/* start bno of left side entry */
 	xfs_agblock_t	ltbnoa;		/* aligned ... */
 	xfs_extlen_t	ltdiff;		/* difference to left side entry */
-	/*REFERENCED*/
-	xfs_agblock_t	ltend;		/* end bno of left side entry */
 	xfs_extlen_t	ltlen;		/* length of left side entry */
 	xfs_extlen_t	ltlena;		/* aligned ... */
 	xfs_agblock_t	ltnew;		/* useful start bno of left side */
@@ -814,8 +807,7 @@
 		if ((error = xfs_alloc_get_rec(cnt_cur, &ltbno, &ltlen, &i)))
 			goto error0;
 		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-		ltend = ltbno + ltlen;
-		ASSERT(ltend <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
+		ASSERT(ltbno + ltlen <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
 		args->len = blen;
 		if (!xfs_alloc_fix_minleft(args)) {
 			xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
@@ -828,7 +820,7 @@
 		 */
 		args->agbno = bnew;
 		ASSERT(bnew >= ltbno);
-		ASSERT(bnew + blen <= ltend);
+		ASSERT(bnew + blen <= ltbno + ltlen);
 		/*
 		 * Set up a cursor for the by-bno tree.
 		 */
@@ -1157,7 +1149,6 @@
 	/*
 	 * Fix up the length and compute the useful address.
 	 */
-	ltend = ltbno + ltlen;
 	args->len = XFS_EXTLEN_MIN(ltlena, args->maxlen);
 	xfs_alloc_fix_len(args);
 	if (!xfs_alloc_fix_minleft(args)) {
@@ -1170,7 +1161,7 @@
 	(void)xfs_alloc_compute_diff(args->agbno, rlen, args->alignment, ltbno,
 		ltlen, &ltnew);
 	ASSERT(ltnew >= ltbno);
-	ASSERT(ltnew + rlen <= ltend);
+	ASSERT(ltnew + rlen <= ltbno + ltlen);
 	ASSERT(ltnew + rlen <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length));
 	args->agbno = ltnew;
 	if ((error = xfs_alloc_fixup_trees(cnt_cur, bno_cur_lt, ltbno, ltlen,
diff --git a/fs/xfs/xfs_alloc.h b/fs/xfs/xfs_alloc.h
index 6d05199..895009a 100644
--- a/fs/xfs/xfs_alloc.h
+++ b/fs/xfs/xfs_alloc.h
@@ -27,16 +27,16 @@
 /*
  * Freespace allocation types.  Argument to xfs_alloc_[v]extent.
  */
-typedef enum xfs_alloctype
-{
-	XFS_ALLOCTYPE_ANY_AG,		/* allocate anywhere, use rotor */
-	XFS_ALLOCTYPE_FIRST_AG,		/* ... start at ag 0 */
-	XFS_ALLOCTYPE_START_AG,		/* anywhere, start in this a.g. */
-	XFS_ALLOCTYPE_THIS_AG,		/* anywhere in this a.g. */
-	XFS_ALLOCTYPE_START_BNO,	/* near this block else anywhere */
-	XFS_ALLOCTYPE_NEAR_BNO,		/* in this a.g. and near this block */
-	XFS_ALLOCTYPE_THIS_BNO		/* at exactly this block */
-} xfs_alloctype_t;
+#define XFS_ALLOCTYPE_ANY_AG	0x01	/* allocate anywhere, use rotor */
+#define XFS_ALLOCTYPE_FIRST_AG	0x02	/* ... start at ag 0 */
+#define XFS_ALLOCTYPE_START_AG	0x04	/* anywhere, start in this a.g. */
+#define XFS_ALLOCTYPE_THIS_AG	0x08	/* anywhere in this a.g. */
+#define XFS_ALLOCTYPE_START_BNO	0x10	/* near this block else anywhere */
+#define XFS_ALLOCTYPE_NEAR_BNO	0x20	/* in this a.g. and near this block */
+#define XFS_ALLOCTYPE_THIS_BNO	0x40	/* at exactly this block */
+
+/* this should become an enum again when the tracing code is fixed */
+typedef unsigned int xfs_alloctype_t;
 
 #define XFS_ALLOC_TYPES \
 	{ XFS_ALLOCTYPE_ANY_AG,		"ANY_AG" }, \
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index 83f4942..97f7328 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -24,19 +24,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index b9c196a..c256824 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -25,19 +25,13 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_attr.h"
@@ -325,8 +319,7 @@
 		return (error);
 	}
 
-	xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(args.trans, dp);
+	xfs_trans_ijoin(args.trans, dp);
 
 	/*
 	 * If the attribute list is non-existent or a shortform list,
@@ -396,10 +389,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args.trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args.trans, dp);
 
 		/*
 		 * Commit the leaf transformation.  We'll need another (linked)
@@ -544,8 +535,7 @@
 	 * No need to make quota reservations here. We expect to release some
 	 * blocks not allocate in the common case.
 	 */
-	xfs_trans_ijoin(args.trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(args.trans, dp);
+	xfs_trans_ijoin(args.trans, dp);
 
 	/*
 	 * Decide on what work routines to call based on the inode size.
@@ -821,8 +811,7 @@
 	 * No need to make quota reservations here. We expect to release some
 	 * blocks, not allocate, in the common case.
 	 */
-	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(trans, dp);
+	xfs_trans_ijoin(trans, dp);
 
 	/*
 	 * Decide on what work routines to call based on the inode size.
@@ -981,10 +970,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		/*
 		 * Commit the current trans (including the inode) and start
@@ -1085,10 +1072,8 @@
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		} else
 			xfs_da_buf_done(bp);
 
@@ -1161,10 +1146,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 	} else
 		xfs_da_buf_done(bp);
 	return(0);
@@ -1317,10 +1300,8 @@
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 
 			/*
 			 * Commit the node conversion and start the next
@@ -1356,10 +1337,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 	} else {
 		/*
 		 * Addition succeeded, update Btree hashvals.
@@ -1470,10 +1449,8 @@
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		}
 
 		/*
@@ -1604,10 +1581,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		/*
 		 * Commit the Btree join operation and start a new trans.
@@ -1658,10 +1633,8 @@
 			 * and started a new one.  We need the inode to be
 			 * in all transactions.
 			 */
-			if (committed) {
-				xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-				xfs_trans_ihold(args->trans, dp);
-			}
+			if (committed)
+				xfs_trans_ijoin(args->trans, dp);
 		} else
 			xfs_da_brelse(args->trans, bp);
 	}
@@ -2004,7 +1977,7 @@
 		error = xfs_bmapi(args->trans, args->dp, (xfs_fileoff_t)lblkno,
 				  args->rmtblkcnt,
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
-				  NULL, 0, map, &nmap, NULL, NULL);
+				  NULL, 0, map, &nmap, NULL);
 		if (error)
 			return(error);
 		ASSERT(nmap >= 1);
@@ -2083,7 +2056,7 @@
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA |
 							XFS_BMAPI_WRITE,
 				  args->firstblock, args->total, &map, &nmap,
-				  args->flist, NULL);
+				  args->flist);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
 						&committed);
@@ -2099,10 +2072,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, dp);
 
 		ASSERT(nmap == 1);
 		ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
@@ -2136,7 +2107,7 @@
 				  args->rmtblkcnt,
 				  XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				  args->firstblock, 0, &map, &nmap,
-				  NULL, NULL);
+				  NULL);
 		if (error) {
 			return(error);
 		}
@@ -2201,7 +2172,7 @@
 					args->rmtblkcnt,
 					XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 					args->firstblock, 0, &map, &nmap,
-					args->flist, NULL);
+					args->flist);
 		if (error) {
 			return(error);
 		}
@@ -2239,7 +2210,7 @@
 		error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
 				    XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				    1, args->firstblock, args->flist,
-				    NULL, &done);
+				    &done);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
 						&committed);
@@ -2255,10 +2226,8 @@
 		 * bmap_finish() may have committed the last trans and started
 		 * a new one.  We need the inode to be in all transactions.
 		 */
-		if (committed) {
-			xfs_trans_ijoin(args->trans, args->dp, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(args->trans, args->dp);
-		}
+		if (committed)
+			xfs_trans_ijoin(args->trans, args->dp);
 
 		/*
 		 * Close out trans and start the next one in the chain.
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index a90ce74..a6cff8e 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -24,8 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
@@ -33,7 +31,6 @@
 #include "xfs_ialloc_btree.h"
 #include "xfs_alloc.h"
 #include "xfs_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -2931,7 +2928,7 @@
 		nmap = 1;
 		error = xfs_bmapi(*trans, dp, (xfs_fileoff_t)tblkno, tblkcnt,
 					XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
-					NULL, 0, &map, &nmap, NULL, NULL);
+					NULL, 0, &map, &nmap, NULL);
 		if (error) {
 			return(error);
 		}
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 99587de..23f14e5 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -30,13 +30,10 @@
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_dir2_data.h"
 #include "xfs_dir2_leaf.h"
@@ -104,7 +101,6 @@
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
@@ -122,7 +118,6 @@
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
 /*
@@ -135,7 +130,6 @@
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp,/* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd);	/* OK to allocate reserved blocks */
 
 /*
@@ -149,7 +143,6 @@
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork); /* data or attr fork */
 
 /*
@@ -162,8 +155,7 @@
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_btree_cur_t		**curp,	/* if *curp is null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
-	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta); /* Change made to incore extents */
+	int			*logflagsp); /* inode logging flags */
 
 /*
  * xfs_bmap_alloc is called by xfs_bmapi to allocate an extent for a file.
@@ -200,7 +192,6 @@
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp,/* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd);	 /* OK to allocate reserved blocks */
 
@@ -489,7 +480,6 @@
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd)	/* OK to use reserved data blocks */
 {
@@ -524,15 +514,6 @@
 			logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else
 			logflags = 0;
-		/* DELTA: single new extent */
-		if (delta) {
-			if (delta->xed_startoff > new->br_startoff)
-				delta->xed_startoff = new->br_startoff;
-			if (delta->xed_blockcount <
-					new->br_startoff + new->br_blockcount)
-				delta->xed_blockcount = new->br_startoff +
-						new->br_blockcount;
-		}
 	}
 	/*
 	 * Any kind of new delayed allocation goes here.
@@ -542,7 +523,7 @@
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
 		if ((error = xfs_bmap_add_extent_hole_delay(ip, idx, new,
-				&logflags, delta, rsvd)))
+				&logflags, rsvd)))
 			goto done;
 	}
 	/*
@@ -553,7 +534,7 @@
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
 		if ((error = xfs_bmap_add_extent_hole_real(ip, idx, cur, new,
-				&logflags, delta, whichfork)))
+				&logflags, whichfork)))
 			goto done;
 	} else {
 		xfs_bmbt_irec_t	prev;	/* old extent at offset idx */
@@ -578,17 +559,17 @@
 						XFS_BTCUR_BPRV_WASDEL);
 				if ((error = xfs_bmap_add_extent_delay_real(ip,
 					idx, &cur, new, &da_new, first, flist,
-					&logflags, delta, rsvd)))
+					&logflags, rsvd)))
 					goto done;
 			} else if (new->br_state == XFS_EXT_NORM) {
 				ASSERT(new->br_state == XFS_EXT_NORM);
 				if ((error = xfs_bmap_add_extent_unwritten_real(
-					ip, idx, &cur, new, &logflags, delta)))
+					ip, idx, &cur, new, &logflags)))
 					goto done;
 			} else {
 				ASSERT(new->br_state == XFS_EXT_UNWRITTEN);
 				if ((error = xfs_bmap_add_extent_unwritten_real(
-					ip, idx, &cur, new, &logflags, delta)))
+					ip, idx, &cur, new, &logflags)))
 					goto done;
 			}
 			ASSERT(*curp == cur || *curp == NULL);
@@ -601,7 +582,7 @@
 				ASSERT((cur->bc_private.b.flags &
 					XFS_BTCUR_BPRV_WASDEL) == 0);
 			if ((error = xfs_bmap_add_extent_hole_real(ip, idx, cur,
-					new, &logflags, delta, whichfork)))
+					new, &logflags, whichfork)))
 				goto done;
 		}
 	}
@@ -666,7 +647,6 @@
 	xfs_fsblock_t		*first,	/* pointer to firstblock variable */
 	xfs_bmap_free_t		*flist,	/* list of extents to be freed */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd)	/* OK to use reserved data block allocation */
 {
 	xfs_btree_cur_t		*cur;	/* btree cursor */
@@ -797,11 +777,6 @@
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Three in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_LEFT_CONTIG:
@@ -832,10 +807,6 @@
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -867,10 +838,6 @@
 				goto done;
 		}
 		*dnew = 0;
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING:
@@ -900,9 +867,6 @@
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
 		*dnew = 0;
-		/* DELTA: The in-core extent described by new changed type. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG:
@@ -942,10 +906,6 @@
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING:
@@ -990,9 +950,6 @@
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx + 1, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1031,10 +988,6 @@
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING:
@@ -1078,9 +1031,6 @@
 		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 		*dnew = temp;
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case 0:
@@ -1161,9 +1111,6 @@
 			nullstartblock((int)temp2));
 		trace_xfs_bmap_post_update(ip, idx + 2, state, _THIS_IP_);
 		*dnew = temp + temp2;
-		/* DELTA: One in-core extent is split in three. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG | BMAP_RIGHT_CONTIG:
@@ -1179,13 +1126,6 @@
 		ASSERT(0);
 	}
 	*curp = cur;
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -1204,8 +1144,7 @@
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_btree_cur_t		**curp,	/* if *curp is null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
-	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta) /* Change made to incore extents */
+	int			*logflagsp) /* inode logging flags */
 {
 	xfs_btree_cur_t		*cur;	/* btree cursor */
 	xfs_bmbt_rec_host_t	*ep;	/* extent entry for idx */
@@ -1219,8 +1158,6 @@
 					/* left is 0, right is 1, prev is 2 */
 	int			rval=0;	/* return value (logging flags) */
 	int			state = 0;/* state bits, accessed thru macros */
-	xfs_filblks_t		temp=0;
-	xfs_filblks_t		temp2=0;
 
 #define	LEFT		r[0]
 #define	RIGHT		r[1]
@@ -1341,11 +1278,6 @@
 				RIGHT.br_blockcount, LEFT.br_state)))
 				goto done;
 		}
-		/* DELTA: Three in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_LEFT_CONTIG:
@@ -1382,10 +1314,6 @@
 				LEFT.br_state)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1422,10 +1350,6 @@
 				newext)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents are replaced by one. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING:
@@ -1453,9 +1377,6 @@
 				newext)))
 				goto done;
 		}
-		/* DELTA: The in-core extent described by new changed type. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG:
@@ -1501,10 +1422,6 @@
 				LEFT.br_state))
 				goto done;
 		}
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = LEFT.br_startoff;
-		temp2 = LEFT.br_blockcount +
-			PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING:
@@ -1544,9 +1461,6 @@
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG:
@@ -1587,10 +1501,6 @@
 				newext)))
 				goto done;
 		}
-		/* DELTA: The boundary between two in-core extents moved. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount +
-			RIGHT.br_blockcount;
 		break;
 
 	case BMAP_RIGHT_FILLING:
@@ -1630,9 +1540,6 @@
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in two. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case 0:
@@ -1692,9 +1599,6 @@
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: One in-core extent is split in three. */
-		temp = PREV.br_startoff;
-		temp2 = PREV.br_blockcount;
 		break;
 
 	case BMAP_LEFT_FILLING | BMAP_LEFT_CONTIG | BMAP_RIGHT_CONTIG:
@@ -1710,13 +1614,6 @@
 		ASSERT(0);
 	}
 	*curp = cur;
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -1736,7 +1633,6 @@
 	xfs_extnum_t		idx,	/* extent number to update/insert */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			rsvd)		/* OK to allocate reserved blocks */
 {
 	xfs_bmbt_rec_host_t	*ep;	/* extent record for idx */
@@ -1747,7 +1643,6 @@
 	xfs_bmbt_irec_t		right;	/* right neighbor extent entry */
 	int			state;  /* state bits, accessed thru macros */
 	xfs_filblks_t		temp=0;	/* temp for indirect calculations */
-	xfs_filblks_t		temp2=0;
 
 	ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 	ep = xfs_iext_get_ext(ifp, idx);
@@ -1819,9 +1714,6 @@
 
 		xfs_iext_remove(ip, idx, 1, state);
 		ip->i_df.if_lastex = idx - 1;
-		/* DELTA: Two in-core extents were replaced by one. */
-		temp2 = temp;
-		temp = left.br_startoff;
 		break;
 
 	case BMAP_LEFT_CONTIG:
@@ -1841,9 +1733,6 @@
 		trace_xfs_bmap_post_update(ip, idx - 1, state, _THIS_IP_);
 
 		ip->i_df.if_lastex = idx - 1;
-		/* DELTA: One in-core extent grew into a hole. */
-		temp2 = temp;
-		temp = left.br_startoff;
 		break;
 
 	case BMAP_RIGHT_CONTIG:
@@ -1862,9 +1751,6 @@
 		trace_xfs_bmap_post_update(ip, idx, state, _THIS_IP_);
 
 		ip->i_df.if_lastex = idx;
-		/* DELTA: One in-core extent grew into a hole. */
-		temp2 = temp;
-		temp = new->br_startoff;
 		break;
 
 	case 0:
@@ -1876,9 +1762,6 @@
 		oldlen = newlen = 0;
 		xfs_iext_insert(ip, idx, 1, new, state);
 		ip->i_df.if_lastex = idx;
-		/* DELTA: A new in-core extent was added in a hole. */
-		temp2 = new->br_blockcount;
-		temp = new->br_startoff;
 		break;
 	}
 	if (oldlen != newlen) {
@@ -1889,13 +1772,6 @@
 		 * Nothing to do for disk quota accounting here.
 		 */
 	}
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 	*logflagsp = 0;
 	return 0;
 }
@@ -1911,7 +1787,6 @@
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*new,	/* new data to add to file extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork) /* data or attr fork */
 {
 	xfs_bmbt_rec_host_t	*ep;	/* pointer to extent entry ins. point */
@@ -1922,8 +1797,6 @@
 	xfs_bmbt_irec_t		right;	/* right neighbor extent entry */
 	int			rval=0;	/* return value (logging flags) */
 	int			state;	/* state bits, accessed thru macros */
-	xfs_filblks_t		temp=0;
-	xfs_filblks_t		temp2=0;
 
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 	ASSERT(idx <= ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t));
@@ -2020,11 +1893,6 @@
 					left.br_state)))
 				goto done;
 		}
-		/* DELTA: Two in-core extents were replaced by one. */
-		temp = left.br_startoff;
-		temp2 = left.br_blockcount +
-			new->br_blockcount +
-			right.br_blockcount;
 		break;
 
 	case BMAP_LEFT_CONTIG:
@@ -2056,10 +1924,6 @@
 					left.br_state)))
 				goto done;
 		}
-		/* DELTA: One in-core extent grew. */
-		temp = left.br_startoff;
-		temp2 = left.br_blockcount +
-			new->br_blockcount;
 		break;
 
 	case BMAP_RIGHT_CONTIG:
@@ -2092,10 +1956,6 @@
 					right.br_state)))
 				goto done;
 		}
-		/* DELTA: One in-core extent grew. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount +
-			right.br_blockcount;
 		break;
 
 	case 0:
@@ -2123,18 +1983,8 @@
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 		}
-		/* DELTA: A new extent was added in a hole. */
-		temp = new->br_startoff;
-		temp2 = new->br_blockcount;
 		break;
 	}
-	if (delta) {
-		temp2 += temp;
-		if (delta->xed_startoff > temp)
-			delta->xed_startoff = temp;
-		if (delta->xed_blockcount < temp2)
-			delta->xed_blockcount = temp2;
-	}
 done:
 	*logflagsp = rval;
 	return error;
@@ -2959,7 +2809,6 @@
 	xfs_btree_cur_t		*cur,	/* if null, not a btree */
 	xfs_bmbt_irec_t		*del,	/* data to remove from extents */
 	int			*logflagsp, /* inode logging flags */
-	xfs_extdelta_t		*delta, /* Change made to incore extents */
 	int			whichfork, /* data or attr fork */
 	int			rsvd)	/* OK to allocate reserved blocks */
 {
@@ -3265,14 +3114,6 @@
 	if (da_old > da_new)
 		xfs_mod_incore_sb(mp, XFS_SBS_FDBLOCKS, (int64_t)(da_old - da_new),
 			rsvd);
-	if (delta) {
-		/* DELTA: report the original extent. */
-		if (delta->xed_startoff > got.br_startoff)
-			delta->xed_startoff = got.br_startoff;
-		if (delta->xed_blockcount < got.br_startoff+got.br_blockcount)
-			delta->xed_blockcount = got.br_startoff +
-							got.br_blockcount;
-	}
 done:
 	*logflagsp = flags;
 	return error;
@@ -3754,9 +3595,10 @@
 		ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
 	}
 	ASSERT(ip->i_d.di_anextents == 0);
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+
 	switch (ip->i_d.di_format) {
 	case XFS_DINODE_FMT_DEV:
 		ip->i_d.di_forkoff = roundup(sizeof(xfs_dev_t), 8) >> 3;
@@ -4483,8 +4325,7 @@
 	xfs_extlen_t	total,		/* total blocks needed */
 	xfs_bmbt_irec_t	*mval,		/* output: map values */
 	int		*nmap,		/* i/o: mval size/count */
-	xfs_bmap_free_t	*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t	*delta)		/* o: change made to incore extents */
+	xfs_bmap_free_t	*flist)		/* i/o: list extents to free */
 {
 	xfs_fsblock_t	abno;		/* allocated block number */
 	xfs_extlen_t	alen;		/* allocated extent length */
@@ -4596,10 +4437,7 @@
 	end = bno + len;
 	obno = bno;
 	bma.ip = NULL;
-	if (delta) {
-		delta->xed_startoff = NULLFILEOFF;
-		delta->xed_blockcount = 0;
-	}
+
 	while (bno < end && n < *nmap) {
 		/*
 		 * Reading past eof, act as though there's a hole
@@ -4620,19 +4458,13 @@
 			 * allocate the stuff asked for in this bmap call
 			 * but that wouldn't be as good.
 			 */
-			if (wasdelay && !(flags & XFS_BMAPI_EXACT)) {
+			if (wasdelay) {
 				alen = (xfs_extlen_t)got.br_blockcount;
 				aoff = got.br_startoff;
 				if (lastx != NULLEXTNUM && lastx) {
 					ep = xfs_iext_get_ext(ifp, lastx - 1);
 					xfs_bmbt_get_all(ep, &prev);
 				}
-			} else if (wasdelay) {
-				alen = (xfs_extlen_t)
-					XFS_FILBLKS_MIN(len,
-						(got.br_startoff +
-						 got.br_blockcount) - bno);
-				aoff = bno;
 			} else {
 				alen = (xfs_extlen_t)
 					XFS_FILBLKS_MIN(len, MAXEXTLEN);
@@ -4831,7 +4663,7 @@
 					got.br_state = XFS_EXT_UNWRITTEN;
 			}
 			error = xfs_bmap_add_extent(ip, lastx, &cur, &got,
-				firstblock, flist, &tmp_logflags, delta,
+				firstblock, flist, &tmp_logflags,
 				whichfork, (flags & XFS_BMAPI_RSVBLOCKS));
 			logflags |= tmp_logflags;
 			if (error)
@@ -4927,7 +4759,7 @@
 			}
 			mval->br_state = XFS_EXT_NORM;
 			error = xfs_bmap_add_extent(ip, lastx, &cur, mval,
-				firstblock, flist, &tmp_logflags, delta,
+				firstblock, flist, &tmp_logflags,
 				whichfork, (flags & XFS_BMAPI_RSVBLOCKS));
 			logflags |= tmp_logflags;
 			if (error)
@@ -5017,14 +4849,6 @@
 	ASSERT(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE ||
 	       XFS_IFORK_NEXTENTS(ip, whichfork) > ifp->if_ext_max);
 	error = 0;
-	if (delta && delta->xed_startoff != NULLFILEOFF) {
-		/* A change was actually made.
-		 * Note that delta->xed_blockount is an offset at this
-		 * point and needs to be converted to a block count.
-		 */
-		ASSERT(delta->xed_blockcount > delta->xed_startoff);
-		delta->xed_blockcount -= delta->xed_startoff;
-	}
 error0:
 	/*
 	 * Log everything.  Do this after conversion, there's no point in
@@ -5136,8 +4960,6 @@
 	xfs_fsblock_t		*firstblock,	/* first allocated block
 						   controls a.g. for allocs */
 	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta,		/* o: change made to incore
-						   extents */
 	int			*done)		/* set if not done yet */
 {
 	xfs_btree_cur_t		*cur;		/* bmap btree cursor */
@@ -5196,10 +5018,7 @@
 	bno = start + len - 1;
 	ep = xfs_bmap_search_extents(ip, bno, whichfork, &eof, &lastx, &got,
 		&prev);
-	if (delta) {
-		delta->xed_startoff = NULLFILEOFF;
-		delta->xed_blockcount = 0;
-	}
+
 	/*
 	 * Check to see if the given block number is past the end of the
 	 * file, back up to the last block if so...
@@ -5297,7 +5116,7 @@
 			}
 			del.br_state = XFS_EXT_UNWRITTEN;
 			error = xfs_bmap_add_extent(ip, lastx, &cur, &del,
-				firstblock, flist, &logflags, delta,
+				firstblock, flist, &logflags,
 				XFS_DATA_FORK, 0);
 			if (error)
 				goto error0;
@@ -5352,7 +5171,7 @@
 				prev.br_state = XFS_EXT_UNWRITTEN;
 				error = xfs_bmap_add_extent(ip, lastx - 1, &cur,
 					&prev, firstblock, flist, &logflags,
-					delta, XFS_DATA_FORK, 0);
+					XFS_DATA_FORK, 0);
 				if (error)
 					goto error0;
 				goto nodelete;
@@ -5361,7 +5180,7 @@
 				del.br_state = XFS_EXT_UNWRITTEN;
 				error = xfs_bmap_add_extent(ip, lastx, &cur,
 					&del, firstblock, flist, &logflags,
-					delta, XFS_DATA_FORK, 0);
+					XFS_DATA_FORK, 0);
 				if (error)
 					goto error0;
 				goto nodelete;
@@ -5414,7 +5233,7 @@
 			goto error0;
 		}
 		error = xfs_bmap_del_extent(ip, tp, lastx, flist, cur, &del,
-				&tmp_logflags, delta, whichfork, rsvd);
+				&tmp_logflags, whichfork, rsvd);
 		logflags |= tmp_logflags;
 		if (error)
 			goto error0;
@@ -5471,14 +5290,6 @@
 	ASSERT(ifp->if_ext_max ==
 	       XFS_IFORK_SIZE(ip, whichfork) / (uint)sizeof(xfs_bmbt_rec_t));
 	error = 0;
-	if (delta && delta->xed_startoff != NULLFILEOFF) {
-		/* A change was actually made.
-		 * Note that delta->xed_blockount is an offset at this
-		 * point and needs to be converted to a block count.
-		 */
-		ASSERT(delta->xed_blockcount > delta->xed_startoff);
-		delta->xed_blockcount -= delta->xed_startoff;
-	}
 error0:
 	/*
 	 * Log everything.  Do this after conversion, there's no point in
@@ -5605,28 +5416,6 @@
 		prealloced = 0;
 		fixlen = 1LL << 32;
 	} else {
-		/*
-		 * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
-		 * not generate a DMAPI read event.  Otherwise, if the
-		 * DM_EVENT_READ bit is set for the file, generate a read
-		 * event in order that the DMAPI application may do its thing
-		 * before we return the extents.  Usually this means restoring
-		 * user file data to regions of the file that look like holes.
-		 *
-		 * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
-		 * BMV_IF_NO_DMAPI_READ so that read events are generated.
-		 * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
-		 * could misinterpret holes in a DMAPI file as true holes,
-		 * when in fact they may represent offline user data.
-		 */
-		if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
-		    !(iflags & BMV_IF_NO_DMAPI_READ)) {
-			error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
-					      0, 0, 0, NULL);
-			if (error)
-				return XFS_ERROR(error);
-		}
-
 		if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
 		    ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
 		    ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
@@ -5713,7 +5502,7 @@
 		error = xfs_bmapi(NULL, ip, XFS_BB_TO_FSBT(mp, bmv->bmv_offset),
 				  XFS_BB_TO_FSB(mp, bmv->bmv_length),
 				  bmapi_flags, NULL, 0, map, &nmap,
-				  NULL, NULL);
+				  NULL);
 		if (error)
 			goto out_free_map;
 		ASSERT(nmap <= subnex);
@@ -5859,66 +5648,34 @@
 }
 
 #ifdef DEBUG
-STATIC
-xfs_buf_t *
+STATIC struct xfs_buf *
 xfs_bmap_get_bp(
-	xfs_btree_cur_t         *cur,
+	struct xfs_btree_cur	*cur,
 	xfs_fsblock_t		bno)
 {
-	int i;
-	xfs_buf_t *bp;
+	struct xfs_log_item_desc *lidp;
+	int			i;
 
 	if (!cur)
-		return(NULL);
+		return NULL;
 
-	bp = NULL;
-	for(i = 0; i < XFS_BTREE_MAXLEVELS; i++) {
-		bp = cur->bc_bufs[i];
-		if (!bp) break;
-		if (XFS_BUF_ADDR(bp) == bno)
-			break;	/* Found it */
+	for (i = 0; i < XFS_BTREE_MAXLEVELS; i++) {
+		if (!cur->bc_bufs[i])
+			break;
+		if (XFS_BUF_ADDR(cur->bc_bufs[i]) == bno)
+			return cur->bc_bufs[i];
 	}
-	if (i == XFS_BTREE_MAXLEVELS)
-		bp = NULL;
 
-	if (!bp) { /* Chase down all the log items to see if the bp is there */
-		xfs_log_item_chunk_t    *licp;
-		xfs_trans_t		*tp;
-
-		tp = cur->bc_tp;
-		licp = &tp->t_items;
-		while (!bp && licp != NULL) {
-			if (xfs_lic_are_all_free(licp)) {
-				licp = licp->lic_next;
-				continue;
-			}
-			for (i = 0; i < licp->lic_unused; i++) {
-				xfs_log_item_desc_t	*lidp;
-				xfs_log_item_t		*lip;
-				xfs_buf_log_item_t	*bip;
-				xfs_buf_t		*lbp;
-
-				if (xfs_lic_isfree(licp, i)) {
-					continue;
-				}
-
-				lidp = xfs_lic_slot(licp, i);
-				lip = lidp->lid_item;
-				if (lip->li_type != XFS_LI_BUF)
-					continue;
-
-				bip = (xfs_buf_log_item_t *)lip;
-				lbp = bip->bli_buf;
-
-				if (XFS_BUF_ADDR(lbp) == bno) {
-					bp = lbp;
-					break; /* Found it */
-				}
-			}
-			licp = licp->lic_next;
-		}
+	/* Chase down all the log items to see if the bp is there */
+	list_for_each_entry(lidp, &cur->bc_tp->t_items, lid_trans) {
+		struct xfs_buf_log_item	*bip;
+		bip = (struct xfs_buf_log_item *)lidp->lid_item;
+		if (bip->bli_item.li_type == XFS_LI_BUF &&
+		    XFS_BUF_ADDR(bip->bli_buf) == bno)
+			return bip->bli_buf;
 	}
-	return(bp);
+
+	return NULL;
 }
 
 STATIC void
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 419dafb..b13569a 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -28,20 +28,6 @@
 extern kmem_zone_t	*xfs_bmap_free_item_zone;
 
 /*
- * DELTA: describe a change to the in-core extent list.
- *
- * Internally the use of xed_blockount is somewhat funky.
- * xed_blockcount contains an offset much of the time because this
- * makes merging changes easier.  (xfs_fileoff_t and xfs_filblks_t are
- * the same underlying type).
- */
-typedef struct xfs_extdelta
-{
-	xfs_fileoff_t		xed_startoff;	/* offset of range */
-	xfs_filblks_t		xed_blockcount;	/* blocks in range */
-} xfs_extdelta_t;
-
-/*
  * List of extents to be free "later".
  * The list is kept sorted on xbf_startblock.
  */
@@ -82,16 +68,13 @@
 #define XFS_BMAPI_DELAY		0x002	/* delayed write operation */
 #define XFS_BMAPI_ENTIRE	0x004	/* return entire extent, not trimmed */
 #define XFS_BMAPI_METADATA	0x008	/* mapping metadata not user data */
-#define XFS_BMAPI_EXACT		0x010	/* allocate only to spec'd bounds */
-#define XFS_BMAPI_ATTRFORK	0x020	/* use attribute fork not data */
-#define XFS_BMAPI_ASYNC		0x040	/* bunmapi xactions can be async */
-#define XFS_BMAPI_RSVBLOCKS	0x080	/* OK to alloc. reserved data blocks */
-#define	XFS_BMAPI_PREALLOC	0x100	/* preallocation op: unwritten space */
-#define	XFS_BMAPI_IGSTATE	0x200	/* Ignore state - */
+#define XFS_BMAPI_ATTRFORK	0x010	/* use attribute fork not data */
+#define XFS_BMAPI_RSVBLOCKS	0x020	/* OK to alloc. reserved data blocks */
+#define	XFS_BMAPI_PREALLOC	0x040	/* preallocation op: unwritten space */
+#define	XFS_BMAPI_IGSTATE	0x080	/* Ignore state - */
 					/* combine contig. space */
-#define	XFS_BMAPI_CONTIG	0x400	/* must allocate only one extent */
-/*	XFS_BMAPI_DIRECT_IO	0x800	*/
-#define XFS_BMAPI_CONVERT	0x1000	/* unwritten extent conversion - */
+#define	XFS_BMAPI_CONTIG	0x100	/* must allocate only one extent */
+#define XFS_BMAPI_CONVERT	0x200	/* unwritten extent conversion - */
 					/* need write cache flushing and no */
 					/* additional allocation alignments */
 
@@ -100,9 +83,7 @@
 	{ XFS_BMAPI_DELAY,	"DELAY" }, \
 	{ XFS_BMAPI_ENTIRE,	"ENTIRE" }, \
 	{ XFS_BMAPI_METADATA,	"METADATA" }, \
-	{ XFS_BMAPI_EXACT,	"EXACT" }, \
 	{ XFS_BMAPI_ATTRFORK,	"ATTRFORK" }, \
-	{ XFS_BMAPI_ASYNC,	"ASYNC" }, \
 	{ XFS_BMAPI_RSVBLOCKS,	"RSVBLOCKS" }, \
 	{ XFS_BMAPI_PREALLOC,	"PREALLOC" }, \
 	{ XFS_BMAPI_IGSTATE,	"IGSTATE" }, \
@@ -310,9 +291,7 @@
 	xfs_extlen_t		total,		/* total blocks needed */
 	struct xfs_bmbt_irec	*mval,		/* output: map values */
 	int			*nmap,		/* i/o: mval size/count */
-	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta);	/* o: change made to incore
-						   extents */
+	xfs_bmap_free_t		*flist);	/* i/o: list extents to free */
 
 /*
  * Map file blocks to filesystem blocks, simple version.
@@ -346,8 +325,6 @@
 	xfs_fsblock_t		*firstblock,	/* first allocated block
 						   controls a.g. for allocs */
 	xfs_bmap_free_t		*flist,		/* i/o: list extents to free */
-	xfs_extdelta_t		*delta,		/* o: change made to incore
-						   extents */
 	int			*done);		/* set if not done yet */
 
 /*
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 416e47e..87d3c10 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -24,21 +24,16 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_alloc.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 96be4b0..829af92 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -24,20 +24,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_btree.h"
 #include "xfs_btree_trace.h"
-#include "xfs_ialloc.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 02a8098..1b09d7a 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -24,7 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_buf_item.h"
 #include "xfs_trans_priv.h"
@@ -34,6 +33,12 @@
 
 kmem_zone_t	*xfs_buf_item_zone;
 
+static inline struct xfs_buf_log_item *BUF_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_buf_log_item, bli_item);
+}
+
+
 #ifdef XFS_TRANS_DEBUG
 /*
  * This function uses an alternate strategy for tracking the bytes
@@ -151,12 +156,13 @@
  */
 STATIC uint
 xfs_buf_item_size(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	uint		nvecs;
-	int		next_bit;
-	int		last_bit;
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
+	uint			nvecs;
+	int			next_bit;
+	int			last_bit;
 
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	if (bip->bli_flags & XFS_BLI_STALE) {
@@ -170,7 +176,6 @@
 		return 1;
 	}
 
-	bp = bip->bli_buf;
 	ASSERT(bip->bli_flags & XFS_BLI_LOGGED);
 	nvecs = 1;
 	last_bit = xfs_next_bit(bip->bli_format.blf_data_map,
@@ -219,13 +224,13 @@
  */
 STATIC void
 xfs_buf_item_format(
-	xfs_buf_log_item_t	*bip,
-	xfs_log_iovec_t		*log_vector)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*vecp)
 {
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf	*bp = bip->bli_buf;
 	uint		base_size;
 	uint		nvecs;
-	xfs_log_iovec_t	*vecp;
-	xfs_buf_t	*bp;
 	int		first_bit;
 	int		last_bit;
 	int		next_bit;
@@ -235,8 +240,6 @@
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
 	       (bip->bli_flags & XFS_BLI_STALE));
-	bp = bip->bli_buf;
-	vecp = log_vector;
 
 	/*
 	 * The size of the base structure is the size of the
@@ -248,7 +251,7 @@
 	base_size =
 		(uint)(sizeof(xfs_buf_log_format_t) +
 		       ((bip->bli_format.blf_map_size - 1) * sizeof(uint)));
-	vecp->i_addr = (xfs_caddr_t)&bip->bli_format;
+	vecp->i_addr = &bip->bli_format;
 	vecp->i_len = base_size;
 	vecp->i_type = XLOG_REG_TYPE_BFORMAT;
 	vecp++;
@@ -263,7 +266,7 @@
 	 */
 	if (bip->bli_flags & XFS_BLI_INODE_BUF) {
 		if (!((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) &&
-		      xfs_log_item_in_current_chkpt(&bip->bli_item)))
+		      xfs_log_item_in_current_chkpt(lip)))
 			bip->bli_format.blf_flags |= XFS_BLF_INODE_BUF;
 		bip->bli_flags &= ~XFS_BLI_INODE_BUF;
 	}
@@ -356,66 +359,90 @@
 
 /*
  * This is called to pin the buffer associated with the buf log item in memory
- * so it cannot be written out.  Simply call bpin() on the buffer to do this.
+ * so it cannot be written out.
  *
  * We also always take a reference to the buffer log item here so that the bli
  * is held while the item is pinned in memory. This means that we can
  * unconditionally drop the reference count a transaction holds when the
  * transaction is completed.
  */
-
 STATIC void
 xfs_buf_item_pin(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
 
-	bp = bip->bli_buf;
-	ASSERT(XFS_BUF_ISBUSY(bp));
+	ASSERT(XFS_BUF_ISBUSY(bip->bli_buf));
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
 	       (bip->bli_flags & XFS_BLI_STALE));
-	atomic_inc(&bip->bli_refcount);
-	trace_xfs_buf_item_pin(bip);
-	xfs_bpin(bp);
-}
 
+	trace_xfs_buf_item_pin(bip);
+
+	atomic_inc(&bip->bli_refcount);
+	atomic_inc(&bip->bli_buf->b_pin_count);
+}
 
 /*
  * This is called to unpin the buffer associated with the buf log
  * item which was previously pinned with a call to xfs_buf_item_pin().
- * Just call bunpin() on the buffer to do this.
  *
  * Also drop the reference to the buf item for the current transaction.
  * If the XFS_BLI_STALE flag is set and we are the last reference,
  * then free up the buf log item and unlock the buffer.
+ *
+ * If the remove flag is set we are called from uncommit in the
+ * forced-shutdown path.  If that is true and the reference count on
+ * the log item is going to drop to zero we need to free the item's
+ * descriptor in the transaction.
  */
 STATIC void
 xfs_buf_item_unpin(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_ail	*ailp;
-	xfs_buf_t	*bp;
-	int		freed;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	xfs_buf_t	*bp = bip->bli_buf;
+	struct xfs_ail	*ailp = lip->li_ailp;
 	int		stale = bip->bli_flags & XFS_BLI_STALE;
+	int		freed;
 
-	bp = bip->bli_buf;
-	ASSERT(bp != NULL);
 	ASSERT(XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *) == bip);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
+
 	trace_xfs_buf_item_unpin(bip);
 
 	freed = atomic_dec_and_test(&bip->bli_refcount);
-	ailp = bip->bli_item.li_ailp;
-	xfs_bunpin(bp);
+
+	if (atomic_dec_and_test(&bp->b_pin_count))
+		wake_up_all(&bp->b_waiters);
+
 	if (freed && stale) {
 		ASSERT(bip->bli_flags & XFS_BLI_STALE);
 		ASSERT(XFS_BUF_VALUSEMA(bp) <= 0);
 		ASSERT(!(XFS_BUF_ISDELAYWRITE(bp)));
 		ASSERT(XFS_BUF_ISSTALE(bp));
 		ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
+
 		trace_xfs_buf_item_unpin_stale(bip);
 
+		if (remove) {
+			/*
+			 * We have to remove the log item from the transaction
+			 * as we are about to release our reference to the
+			 * buffer.  If we don't, the unlock that occurs later
+			 * in xfs_trans_uncommit() will ry to reference the
+			 * buffer which we no longer have a hold on.
+			 */
+			xfs_trans_del_item(lip);
+
+			/*
+			 * Since the transaction no longer refers to the buffer,
+			 * the buffer should no longer refer to the transaction.
+			 */
+			XFS_BUF_SET_FSPRIVATE2(bp, NULL);
+		}
+
 		/*
 		 * If we get called here because of an IO error, we may
 		 * or may not have the item on the AIL. xfs_trans_ail_delete()
@@ -437,48 +464,6 @@
 }
 
 /*
- * this is called from uncommit in the forced-shutdown path.
- * we need to check to see if the reference count on the log item
- * is going to drop to zero.  If so, unpin will free the log item
- * so we need to free the item's descriptor (that points to the item)
- * in the transaction.
- */
-STATIC void
-xfs_buf_item_unpin_remove(
-	xfs_buf_log_item_t	*bip,
-	xfs_trans_t		*tp)
-{
-	/* will xfs_buf_item_unpin() call xfs_buf_item_relse()? */
-	if ((atomic_read(&bip->bli_refcount) == 1) &&
-	    (bip->bli_flags & XFS_BLI_STALE)) {
-		/*
-		 * yes -- We can safely do some work here and then call
-		 * buf_item_unpin to do the rest because we are
-		 * are holding the buffer locked so no one else will be
-		 * able to bump up the refcount. We have to remove the
-		 * log item from the transaction as we are about to release
-		 * our reference to the buffer. If we don't, the unlock that
-		 * occurs later in the xfs_trans_uncommit() will try to
-		 * reference the buffer which we no longer have a hold on.
-		 */
-		struct xfs_log_item_desc *lidp;
-
-		ASSERT(XFS_BUF_VALUSEMA(bip->bli_buf) <= 0);
-		trace_xfs_buf_item_unpin_stale(bip);
-
-		lidp = xfs_trans_find_item(tp, (xfs_log_item_t *)bip);
-		xfs_trans_free_item(tp, lidp);
-
-		/*
-		 * Since the transaction no longer refers to the buffer, the
-		 * buffer should no longer refer to the transaction.
-		 */
-		XFS_BUF_SET_FSPRIVATE2(bip->bli_buf, NULL);
-	}
-	xfs_buf_item_unpin(bip);
-}
-
-/*
  * This is called to attempt to lock the buffer associated with this
  * buf log item.  Don't sleep on the buffer lock.  If we can't get
  * the lock right away, return 0.  If we can get the lock, take a
@@ -488,11 +473,11 @@
  */
 STATIC uint
 xfs_buf_item_trylock(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
-	bp = bip->bli_buf;
 	if (XFS_BUF_ISPINNED(bp))
 		return XFS_ITEM_PINNED;
 	if (!XFS_BUF_CPSEMA(bp))
@@ -529,13 +514,12 @@
  */
 STATIC void
 xfs_buf_item_unlock(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	int		aborted;
-	xfs_buf_t	*bp;
-	uint		hold;
-
-	bp = bip->bli_buf;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
+	int			aborted;
+	uint			hold;
 
 	/* Clear the buffer's association with this transaction. */
 	XFS_BUF_SET_FSPRIVATE2(bp, NULL);
@@ -546,7 +530,7 @@
 	 * (cancelled) buffers at unpin time, but we'll never go through the
 	 * pin/unpin cycle if we abort inside commit.
 	 */
-	aborted = (bip->bli_item.li_flags & XFS_LI_ABORTED) != 0;
+	aborted = (lip->li_flags & XFS_LI_ABORTED) != 0;
 
 	/*
 	 * Before possibly freeing the buf item, determine if we should
@@ -607,16 +591,16 @@
  */
 STATIC xfs_lsn_t
 xfs_buf_item_committed(
-	xfs_buf_log_item_t	*bip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+
 	trace_xfs_buf_item_committed(bip);
 
-	if ((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) &&
-	    (bip->bli_item.li_lsn != 0)) {
-		return bip->bli_item.li_lsn;
-	}
-	return (lsn);
+	if ((bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF) && lip->li_lsn != 0)
+		return lip->li_lsn;
+	return lsn;
 }
 
 /*
@@ -626,15 +610,16 @@
  */
 STATIC void
 xfs_buf_item_push(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
 	ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
+	ASSERT(!XFS_BUF_ISDELAYWRITE(bp));
+
 	trace_xfs_buf_item_push(bip);
 
-	bp = bip->bli_buf;
-	ASSERT(!XFS_BUF_ISDELAYWRITE(bp));
 	xfs_buf_relse(bp);
 }
 
@@ -646,22 +631,24 @@
  */
 STATIC void
 xfs_buf_item_pushbuf(
-	xfs_buf_log_item_t	*bip)
+	struct xfs_log_item	*lip)
 {
-	xfs_buf_t	*bp;
+	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
+	struct xfs_buf		*bp = bip->bli_buf;
 
 	ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
+	ASSERT(XFS_BUF_ISDELAYWRITE(bp));
+
 	trace_xfs_buf_item_pushbuf(bip);
 
-	bp = bip->bli_buf;
-	ASSERT(XFS_BUF_ISDELAYWRITE(bp));
 	xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
 }
 
-/* ARGSUSED */
 STATIC void
-xfs_buf_item_committing(xfs_buf_log_item_t *bip, xfs_lsn_t commit_lsn)
+xfs_buf_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		commit_lsn)
 {
 }
 
@@ -669,21 +656,16 @@
  * This is the ops vector shared by all buf log items.
  */
 static struct xfs_item_ops xfs_buf_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_buf_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_buf_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_buf_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_buf_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t *))
-					xfs_buf_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_buf_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_buf_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_buf_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_buf_item_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))xfs_buf_item_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_buf_item_committing
+	.iop_size	= xfs_buf_item_size,
+	.iop_format	= xfs_buf_item_format,
+	.iop_pin	= xfs_buf_item_pin,
+	.iop_unpin	= xfs_buf_item_unpin,
+	.iop_trylock	= xfs_buf_item_trylock,
+	.iop_unlock	= xfs_buf_item_unlock,
+	.iop_committed	= xfs_buf_item_committed,
+	.iop_push	= xfs_buf_item_push,
+	.iop_pushbuf	= xfs_buf_item_pushbuf,
+	.iop_committing = xfs_buf_item_committing
 };
 
 
@@ -712,7 +694,6 @@
 	 */
 	if (bp->b_mount != mp)
 		bp->b_mount = mp;
-	XFS_BUF_SET_BDSTRAT_FUNC(bp, xfs_bdstrat_cb);
 	if (XFS_BUF_FSPRIVATE(bp, void *) != NULL) {
 		lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
 		if (lip->li_type == XFS_LI_BUF) {
@@ -1098,15 +1079,14 @@
  * It is called by xfs_buf_iodone_callbacks() above which will take
  * care of cleaning up the buffer itself.
  */
-/* ARGSUSED */
 void
 xfs_buf_iodone(
-	xfs_buf_t		*bp,
-	xfs_buf_log_item_t	*bip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
-	struct xfs_ail		*ailp = bip->bli_item.li_ailp;
+	struct xfs_ail		*ailp = lip->li_ailp;
 
-	ASSERT(bip->bli_buf == bp);
+	ASSERT(BUF_ITEM(lip)->bli_buf == bp);
 
 	xfs_buf_rele(bp);
 
@@ -1120,6 +1100,6 @@
 	 * Either way, AIL is useless if we're forcing a shutdown.
 	 */
 	spin_lock(&ailp->xa_lock);
-	xfs_trans_ail_delete(ailp, (xfs_log_item_t *)bip);
-	xfs_buf_item_free(bip);
+	xfs_trans_ail_delete(ailp, lip);
+	xfs_buf_item_free(BUF_ITEM(lip));
 }
diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h
index f20bb47..0e2ed43 100644
--- a/fs/xfs/xfs_buf_item.h
+++ b/fs/xfs/xfs_buf_item.h
@@ -124,7 +124,7 @@
 			      void(*)(struct xfs_buf *, xfs_log_item_t *),
 			      xfs_log_item_t *);
 void	xfs_buf_iodone_callbacks(struct xfs_buf *);
-void	xfs_buf_iodone(struct xfs_buf *, xfs_buf_log_item_t *);
+void	xfs_buf_iodone(struct xfs_buf *, struct xfs_log_item *);
 
 #ifdef XFS_TRANS_DEBUG
 void
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 0ca556b..30fa0e2 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -25,19 +25,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_alloc.h"
-#include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_attr.h"
 #include "xfs_attr_leaf.h"
@@ -581,16 +576,14 @@
 	xfs_da_intnode_t *node;
 	xfs_da_node_entry_t *btree;
 	int tmp;
-	xfs_mount_t *mp;
 
 	node = oldblk->bp->data;
-	mp = state->mp;
 	ASSERT(be16_to_cpu(node->hdr.info.magic) == XFS_DA_NODE_MAGIC);
 	ASSERT((oldblk->index >= 0) && (oldblk->index <= be16_to_cpu(node->hdr.count)));
 	ASSERT(newblk->blkno != 0);
 	if (state->args->whichfork == XFS_DATA_FORK)
-		ASSERT(newblk->blkno >= mp->m_dirleafblk &&
-		       newblk->blkno < mp->m_dirfreeblk);
+		ASSERT(newblk->blkno >= state->mp->m_dirleafblk &&
+		       newblk->blkno < state->mp->m_dirfreeblk);
 
 	/*
 	 * We may need to make some room before we insert the new node.
@@ -1601,7 +1594,7 @@
 			xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
 			XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
-			args->flist, NULL))) {
+			args->flist))) {
 		return error;
 	}
 	ASSERT(nmap <= 1);
@@ -1622,8 +1615,7 @@
 					xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
 					XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
-					&mapp[mapi], &nmap, args->flist,
-					NULL))) {
+					&mapp[mapi], &nmap, args->flist))) {
 				kmem_free(mapp);
 				return error;
 			}
@@ -1884,7 +1876,7 @@
 		 */
 		if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
 				xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
-				0, args->firstblock, args->flist, NULL,
+				0, args->firstblock, args->flist,
 				&done)) == ENOSPC) {
 			if (w != XFS_DATA_FORK)
 				break;
@@ -1989,7 +1981,7 @@
 					nfsb,
 					XFS_BMAPI_METADATA |
 						xfs_bmapi_aflag(whichfork),
-					NULL, 0, mapp, &nmap, NULL, NULL)))
+					NULL, 0, mapp, &nmap, NULL)))
 				goto exit0;
 		}
 	} else {
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 5bba29a..3b9582c 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -24,24 +24,15 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_dfrag.h"
 #include "xfs_error.h"
-#include "xfs_rw.h"
 #include "xfs_vnodeops.h"
 #include "xfs_trace.h"
 
@@ -69,7 +60,9 @@
 		goto out;
 	}
 
-	if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND)) {
+	if (!(file->f_mode & FMODE_WRITE) ||
+	    !(file->f_mode & FMODE_READ) ||
+	    (file->f_flags & O_APPEND)) {
 		error = XFS_ERROR(EBADF);
 		goto out_put_file;
 	}
@@ -81,6 +74,7 @@
 	}
 
 	if (!(tmp_file->f_mode & FMODE_WRITE) ||
+	    !(tmp_file->f_mode & FMODE_READ) ||
 	    (tmp_file->f_flags & O_APPEND)) {
 		error = XFS_ERROR(EBADF);
 		goto out_put_tmp_file;
@@ -422,11 +416,8 @@
 	}
 
 
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	IHOLD(tip);
-	xfs_trans_ijoin(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
 
 	xfs_trans_log_inode(tp, ip,  ilf_fields);
 	xfs_trans_log_inode(tp, tip, tilf_fields);
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index 42520f0..a1321bc 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -25,13 +25,11 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -382,7 +380,7 @@
 	int		rval;		/* return value */
 	int		v;		/* type-checking value */
 
-	xfs_itrace_entry(dp);
+	trace_xfs_readdir(dp);
 
 	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
 		return XFS_ERROR(EIO);
@@ -549,7 +547,7 @@
 	if ((error = xfs_bmapi(tp, dp, bno, count,
 			XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
-			args->flist, NULL)))
+			args->flist)))
 		return error;
 	ASSERT(nmap <= 1);
 	if (nmap == 1) {
@@ -581,8 +579,7 @@
 			if ((error = xfs_bmapi(tp, dp, b, c,
 					XFS_BMAPI_WRITE|XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
-					&mapp[mapi], &nmap, args->flist,
-					NULL))) {
+					&mapp[mapi], &nmap, args->flist))) {
 				kmem_free(mapp);
 				return error;
 			}
@@ -715,7 +712,7 @@
 	 */
 	if ((error = xfs_bunmapi(tp, dp, da, mp->m_dirblkfsbs,
 			XFS_BMAPI_METADATA, 0, args->firstblock, args->flist,
-			NULL, &done))) {
+			&done))) {
 		/*
 		 * ENOSPC actually can happen if we're in a removename with
 		 * no space reservation, and the resulting block removal
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index 779a267..580d99c 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -1073,10 +1071,10 @@
 	 */
 
 	buf_len = dp->i_df.if_bytes;
-	buf = kmem_alloc(dp->i_df.if_bytes, KM_SLEEP);
+	buf = kmem_alloc(buf_len, KM_SLEEP);
 
-	memcpy(buf, sfp, dp->i_df.if_bytes);
-	xfs_idata_realloc(dp, -dp->i_df.if_bytes, XFS_DATA_FORK);
+	memcpy(buf, sfp, buf_len);
+	xfs_idata_realloc(dp, -buf_len, XFS_DATA_FORK);
 	dp->i_d.di_size = 0;
 	xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE);
 	/*
diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c
index 498f8d6..921595b 100644
--- a/fs/xfs/xfs_dir2_data.c
+++ b/fs/xfs/xfs_dir2_data.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_dir2_data.h"
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index e2d8985..504be86 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -25,11 +25,9 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dir2_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -875,7 +873,7 @@
 					xfs_dir2_byte_to_da(mp,
 						XFS_DIR2_LEAF_OFFSET) - map_off,
 					XFS_BMAPI_METADATA, NULL, 0,
-					&map[map_valid], &nmap, NULL, NULL);
+					&map[map_valid], &nmap, NULL);
 				/*
 				 * Don't know if we should ignore this or
 				 * try to return an error.
diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c
index 78fc4d9..f9a0864 100644
--- a/fs/xfs/xfs_dir2_node.c
+++ b/fs/xfs/xfs_dir2_node.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_bmap.h"
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index c1a5945d..b1bae6b 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -24,12 +24,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
deleted file mode 100644
index 2813cdd..0000000
--- a/fs/xfs/xfs_dmapi.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef __XFS_DMAPI_H__
-#define __XFS_DMAPI_H__
-
-/*	Values used to define the on-disk version of dm_attrname_t. All
- *	on-disk attribute names start with the 8-byte string "SGI_DMI_".
- *
- *      In the on-disk inode, DMAPI attribute names consist of the user-provided
- *      name with the DMATTR_PREFIXSTRING pre-pended.  This string must NEVER be
- *      changed.
- */
-
-#define DMATTR_PREFIXLEN	8
-#define DMATTR_PREFIXSTRING	"SGI_DMI_"
-
-typedef enum {
-	DM_EVENT_INVALID	= -1,
-	DM_EVENT_CANCEL		= 0,		/* not supported */
-	DM_EVENT_MOUNT		= 1,
-	DM_EVENT_PREUNMOUNT	= 2,
-	DM_EVENT_UNMOUNT	= 3,
-	DM_EVENT_DEBUT		= 4,		/* not supported */
-	DM_EVENT_CREATE		= 5,
-	DM_EVENT_CLOSE		= 6,		/* not supported */
-	DM_EVENT_POSTCREATE	= 7,
-	DM_EVENT_REMOVE		= 8,
-	DM_EVENT_POSTREMOVE	= 9,
-	DM_EVENT_RENAME		= 10,
-	DM_EVENT_POSTRENAME	= 11,
-	DM_EVENT_LINK		= 12,
-	DM_EVENT_POSTLINK	= 13,
-	DM_EVENT_SYMLINK	= 14,
-	DM_EVENT_POSTSYMLINK	= 15,
-	DM_EVENT_READ		= 16,
-	DM_EVENT_WRITE		= 17,
-	DM_EVENT_TRUNCATE	= 18,
-	DM_EVENT_ATTRIBUTE	= 19,
-	DM_EVENT_DESTROY	= 20,
-	DM_EVENT_NOSPACE	= 21,
-	DM_EVENT_USER		= 22,
-	DM_EVENT_MAX		= 23
-} dm_eventtype_t;
-#define HAVE_DM_EVENTTYPE_T
-
-typedef enum {
-	DM_RIGHT_NULL,
-	DM_RIGHT_SHARED,
-	DM_RIGHT_EXCL
-} dm_right_t;
-#define HAVE_DM_RIGHT_T
-
-/* Defines for determining if an event message should be sent. */
-#ifdef HAVE_DMAPI
-#define	DM_EVENT_ENABLED(ip, event) ( \
-	unlikely ((ip)->i_mount->m_flags & XFS_MOUNT_DMAPI) && \
-		( ((ip)->i_d.di_dmevmask & (1 << event)) || \
-		  ((ip)->i_mount->m_dmevmask & (1 << event)) ) \
-	)
-#else
-#define DM_EVENT_ENABLED(ip, event)	(0)
-#endif
-
-#define DM_XFS_VALID_FS_EVENTS		( \
-	(1 << DM_EVENT_PREUNMOUNT)	| \
-	(1 << DM_EVENT_UNMOUNT)		| \
-	(1 << DM_EVENT_NOSPACE)		| \
-	(1 << DM_EVENT_DEBUT)		| \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events valid in dm_set_eventlist() when called with a file handle for
-   a regular file or a symlink.  These events are persistent.
-*/
-
-#define	DM_XFS_VALID_FILE_EVENTS	( \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events valid in dm_set_eventlist() when called with a file handle for
-   a directory.  These events are persistent.
-*/
-
-#define	DM_XFS_VALID_DIRECTORY_EVENTS	( \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-/* Events supported by the XFS filesystem. */
-#define	DM_XFS_SUPPORTED_EVENTS		( \
-	(1 << DM_EVENT_MOUNT)		| \
-	(1 << DM_EVENT_PREUNMOUNT)	| \
-	(1 << DM_EVENT_UNMOUNT)		| \
-	(1 << DM_EVENT_NOSPACE)		| \
-	(1 << DM_EVENT_CREATE)		| \
-	(1 << DM_EVENT_POSTCREATE)	| \
-	(1 << DM_EVENT_REMOVE)		| \
-	(1 << DM_EVENT_POSTREMOVE)	| \
-	(1 << DM_EVENT_RENAME)		| \
-	(1 << DM_EVENT_POSTRENAME)	| \
-	(1 << DM_EVENT_LINK)		| \
-	(1 << DM_EVENT_POSTLINK)	| \
-	(1 << DM_EVENT_SYMLINK)		| \
-	(1 << DM_EVENT_POSTSYMLINK)	| \
-	(1 << DM_EVENT_READ)		| \
-	(1 << DM_EVENT_WRITE)		| \
-	(1 << DM_EVENT_TRUNCATE)	| \
-	(1 << DM_EVENT_ATTRIBUTE)	| \
-	(1 << DM_EVENT_DESTROY)		)
-
-
-/*
- *	Definitions used for the flags field on dm_send_*_event().
- */
-
-#define DM_FLAGS_NDELAY		0x001	/* return EAGAIN after dm_pending() */
-#define DM_FLAGS_UNWANTED	0x002	/* event not in fsys dm_eventset_t */
-#define DM_FLAGS_IMUX		0x004	/* thread holds i_mutex */
-#define DM_FLAGS_IALLOCSEM_RD	0x010	/* thread holds i_alloc_sem rd */
-#define DM_FLAGS_IALLOCSEM_WR	0x020	/* thread holds i_alloc_sem wr */
-
-/*
- *	Pull in platform specific event flags defines
- */
-#include "xfs_dmapi_priv.h"
-
-/*
- *	Macros to turn caller specified delay/block flags into
- *	dm_send_xxxx_event flag DM_FLAGS_NDELAY.
- */
-
-#define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \
-			DM_FLAGS_NDELAY : 0)
-#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0)
-
-#endif  /* __XFS_DMAPI_H__ */
diff --git a/fs/xfs/xfs_dmops.c b/fs/xfs/xfs_dmops.c
deleted file mode 100644
index e71e258..0000000
--- a/fs/xfs/xfs_dmops.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_trans.h"
-#include "xfs_sb.h"
-#include "xfs_dmapi.h"
-#include "xfs_inum.h"
-#include "xfs_ag.h"
-#include "xfs_mount.h"
-
-
-static struct xfs_dmops xfs_dmcore_stub = {
-	.xfs_send_data		= (xfs_send_data_t)fs_nosys,
-	.xfs_send_mmap		= (xfs_send_mmap_t)fs_noerr,
-	.xfs_send_destroy	= (xfs_send_destroy_t)fs_nosys,
-	.xfs_send_namesp	= (xfs_send_namesp_t)fs_nosys,
-	.xfs_send_mount		= (xfs_send_mount_t)fs_nosys,
-	.xfs_send_unmount	= (xfs_send_unmount_t)fs_noerr,
-};
-
-int
-xfs_dmops_get(struct xfs_mount *mp)
-{
-	if (mp->m_flags & XFS_MOUNT_DMAPI) {
-		cmn_err(CE_WARN,
-			"XFS: dmapi support not available in this kernel.");
-		return EINVAL;
-	}
-
-	mp->m_dm_ops = &xfs_dmcore_stub;
-	return 0;
-}
-
-void
-xfs_dmops_put(struct xfs_mount *mp)
-{
-}
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 047b8a8..ed99902 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -23,12 +23,8 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_utils.h"
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index 409fe81..a55e687 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -24,7 +24,6 @@
 #include "xfs_buf_item.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_extfree_item.h"
@@ -33,18 +32,19 @@
 kmem_zone_t	*xfs_efi_zone;
 kmem_zone_t	*xfs_efd_zone;
 
-STATIC void	xfs_efi_item_unlock(xfs_efi_log_item_t *);
+static inline struct xfs_efi_log_item *EFI_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_efi_log_item, efi_item);
+}
 
 void
-xfs_efi_item_free(xfs_efi_log_item_t *efip)
+xfs_efi_item_free(
+	struct xfs_efi_log_item	*efip)
 {
-	int nexts = efip->efi_format.efi_nextents;
-
-	if (nexts > XFS_EFI_MAX_FAST_EXTENTS) {
+	if (efip->efi_format.efi_nextents > XFS_EFI_MAX_FAST_EXTENTS)
 		kmem_free(efip);
-	} else {
+	else
 		kmem_zone_free(xfs_efi_zone, efip);
-	}
 }
 
 /*
@@ -52,9 +52,9 @@
  * We only need 1 iovec for an efi item.  It just logs the efi_log_format
  * structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efi_item_size(xfs_efi_log_item_t *efip)
+xfs_efi_item_size(
+	struct xfs_log_item	*lip)
 {
 	return 1;
 }
@@ -67,10 +67,12 @@
  * slots in the efi item have been filled.
  */
 STATIC void
-xfs_efi_item_format(xfs_efi_log_item_t	*efip,
-		    xfs_log_iovec_t	*log_vector)
+xfs_efi_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	uint	size;
+	struct xfs_efi_log_item	*efip = EFI_ITEM(lip);
+	uint			size;
 
 	ASSERT(efip->efi_next_extent == efip->efi_format.efi_nextents);
 
@@ -80,7 +82,7 @@
 	size += (efip->efi_format.efi_nextents - 1) * sizeof(xfs_extent_t);
 	efip->efi_format.efi_size = 1;
 
-	log_vector->i_addr = (xfs_caddr_t)&(efip->efi_format);
+	log_vector->i_addr = &efip->efi_format;
 	log_vector->i_len = size;
 	log_vector->i_type = XLOG_REG_TYPE_EFI_FORMAT;
 	ASSERT(size >= sizeof(xfs_efi_log_format_t));
@@ -90,60 +92,33 @@
 /*
  * Pinning has no meaning for an efi item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_pin(xfs_efi_log_item_t *efip)
+xfs_efi_item_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * While EFIs cannot really be pinned, the unpin operation is the
  * last place at which the EFI is manipulated during a transaction.
  * Here we coordinate with xfs_efi_cancel() to determine who gets to
  * free the EFI.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_unpin(xfs_efi_log_item_t *efip)
+xfs_efi_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_ail		*ailp = efip->efi_item.li_ailp;
+	struct xfs_efi_log_item	*efip = EFI_ITEM(lip);
+	struct xfs_ail		*ailp = lip->li_ailp;
 
 	spin_lock(&ailp->xa_lock);
 	if (efip->efi_flags & XFS_EFI_CANCELED) {
-		/* xfs_trans_ail_delete() drops the AIL lock. */
-		xfs_trans_ail_delete(ailp, (xfs_log_item_t *)efip);
-		xfs_efi_item_free(efip);
-	} else {
-		efip->efi_flags |= XFS_EFI_COMMITTED;
-		spin_unlock(&ailp->xa_lock);
-	}
-}
-
-/*
- * like unpin only we have to also clear the xaction descriptor
- * pointing the log item if we free the item.  This routine duplicates
- * unpin because efi_flags is protected by the AIL lock.  Freeing
- * the descriptor and then calling unpin would force us to drop the AIL
- * lock which would open up a race condition.
- */
-STATIC void
-xfs_efi_item_unpin_remove(xfs_efi_log_item_t *efip, xfs_trans_t *tp)
-{
-	struct xfs_ail		*ailp = efip->efi_item.li_ailp;
-	xfs_log_item_desc_t	*lidp;
-
-	spin_lock(&ailp->xa_lock);
-	if (efip->efi_flags & XFS_EFI_CANCELED) {
-		/*
-		 * free the xaction descriptor pointing to this item
-		 */
-		lidp = xfs_trans_find_item(tp, (xfs_log_item_t *) efip);
-		xfs_trans_free_item(tp, lidp);
+		if (remove)
+			xfs_trans_del_item(lip);
 
 		/* xfs_trans_ail_delete() drops the AIL lock. */
-		xfs_trans_ail_delete(ailp, (xfs_log_item_t *)efip);
+		xfs_trans_ail_delete(ailp, lip);
 		xfs_efi_item_free(efip);
 	} else {
 		efip->efi_flags |= XFS_EFI_COMMITTED;
@@ -158,9 +133,9 @@
  * XFS_ITEM_PINNED so that the caller will eventually flush the log.
  * This should help in getting the EFI out of the AIL.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efi_item_trylock(xfs_efi_log_item_t *efip)
+xfs_efi_item_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_PINNED;
 }
@@ -168,13 +143,12 @@
 /*
  * Efi items have no locking, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_unlock(xfs_efi_log_item_t *efip)
+xfs_efi_item_unlock(
+	struct xfs_log_item	*lip)
 {
-	if (efip->efi_item.li_flags & XFS_LI_ABORTED)
-		xfs_efi_item_free(efip);
-	return;
+	if (lip->li_flags & XFS_LI_ABORTED)
+		xfs_efi_item_free(EFI_ITEM(lip));
 }
 
 /*
@@ -183,9 +157,10 @@
  * flag is not paid any attention here.  Checking for that is delayed
  * until the EFI is unpinned.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_efi_item_committed(xfs_efi_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efi_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
 	return lsn;
 }
@@ -195,11 +170,10 @@
  * stuck waiting for all of its corresponding efd items to be
  * committed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_push(xfs_efi_log_item_t *efip)
+xfs_efi_item_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
@@ -209,61 +183,55 @@
  * example, for inodes, the inode is locked throughout the extent freeing
  * so the dependency should be recorded there.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efi_item_committing(xfs_efi_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efi_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return;
 }
 
 /*
  * This is the ops vector shared by all efi log items.
  */
 static struct xfs_item_ops xfs_efi_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_efi_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_efi_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_efi_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_efi_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t *))
-					xfs_efi_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_efi_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_efi_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efi_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_efi_item_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efi_item_committing
+	.iop_size	= xfs_efi_item_size,
+	.iop_format	= xfs_efi_item_format,
+	.iop_pin	= xfs_efi_item_pin,
+	.iop_unpin	= xfs_efi_item_unpin,
+	.iop_trylock	= xfs_efi_item_trylock,
+	.iop_unlock	= xfs_efi_item_unlock,
+	.iop_committed	= xfs_efi_item_committed,
+	.iop_push	= xfs_efi_item_push,
+	.iop_committing = xfs_efi_item_committing
 };
 
 
 /*
  * Allocate and initialize an efi item with the given number of extents.
  */
-xfs_efi_log_item_t *
-xfs_efi_init(xfs_mount_t	*mp,
-	     uint		nextents)
+struct xfs_efi_log_item *
+xfs_efi_init(
+	struct xfs_mount	*mp,
+	uint			nextents)
 
 {
-	xfs_efi_log_item_t	*efip;
+	struct xfs_efi_log_item	*efip;
 	uint			size;
 
 	ASSERT(nextents > 0);
 	if (nextents > XFS_EFI_MAX_FAST_EXTENTS) {
 		size = (uint)(sizeof(xfs_efi_log_item_t) +
 			((nextents - 1) * sizeof(xfs_extent_t)));
-		efip = (xfs_efi_log_item_t*)kmem_zalloc(size, KM_SLEEP);
+		efip = kmem_zalloc(size, KM_SLEEP);
 	} else {
-		efip = (xfs_efi_log_item_t*)kmem_zone_zalloc(xfs_efi_zone,
-							     KM_SLEEP);
+		efip = kmem_zone_zalloc(xfs_efi_zone, KM_SLEEP);
 	}
 
 	xfs_log_item_init(mp, &efip->efi_item, XFS_LI_EFI, &xfs_efi_item_ops);
 	efip->efi_format.efi_nextents = nextents;
 	efip->efi_format.efi_id = (__psint_t)(void*)efip;
 
-	return (efip);
+	return efip;
 }
 
 /*
@@ -276,7 +244,7 @@
 int
 xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt)
 {
-	xfs_efi_log_format_t *src_efi_fmt = (xfs_efi_log_format_t *)buf->i_addr;
+	xfs_efi_log_format_t *src_efi_fmt = buf->i_addr;
 	uint i;
 	uint len = sizeof(xfs_efi_log_format_t) + 
 		(src_efi_fmt->efi_nextents - 1) * sizeof(xfs_extent_t);  
@@ -289,8 +257,7 @@
 		memcpy((char *)dst_efi_fmt, (char*)src_efi_fmt, len);
 		return 0;
 	} else if (buf->i_len == len32) {
-		xfs_efi_log_format_32_t *src_efi_fmt_32 =
-			(xfs_efi_log_format_32_t *)buf->i_addr;
+		xfs_efi_log_format_32_t *src_efi_fmt_32 = buf->i_addr;
 
 		dst_efi_fmt->efi_type     = src_efi_fmt_32->efi_type;
 		dst_efi_fmt->efi_size     = src_efi_fmt_32->efi_size;
@@ -304,8 +271,7 @@
 		}
 		return 0;
 	} else if (buf->i_len == len64) {
-		xfs_efi_log_format_64_t *src_efi_fmt_64 =
-			(xfs_efi_log_format_64_t *)buf->i_addr;
+		xfs_efi_log_format_64_t *src_efi_fmt_64 = buf->i_addr;
 
 		dst_efi_fmt->efi_type     = src_efi_fmt_64->efi_type;
 		dst_efi_fmt->efi_size     = src_efi_fmt_64->efi_size;
@@ -356,16 +322,18 @@
 	}
 }
 
-STATIC void
-xfs_efd_item_free(xfs_efd_log_item_t *efdp)
+static inline struct xfs_efd_log_item *EFD_ITEM(struct xfs_log_item *lip)
 {
-	int nexts = efdp->efd_format.efd_nextents;
+	return container_of(lip, struct xfs_efd_log_item, efd_item);
+}
 
-	if (nexts > XFS_EFD_MAX_FAST_EXTENTS) {
+STATIC void
+xfs_efd_item_free(struct xfs_efd_log_item *efdp)
+{
+	if (efdp->efd_format.efd_nextents > XFS_EFD_MAX_FAST_EXTENTS)
 		kmem_free(efdp);
-	} else {
+	else
 		kmem_zone_free(xfs_efd_zone, efdp);
-	}
 }
 
 /*
@@ -373,9 +341,9 @@
  * We only need 1 iovec for an efd item.  It just logs the efd_log_format
  * structure.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efd_item_size(xfs_efd_log_item_t *efdp)
+xfs_efd_item_size(
+	struct xfs_log_item	*lip)
 {
 	return 1;
 }
@@ -388,10 +356,12 @@
  * slots in the efd item have been filled.
  */
 STATIC void
-xfs_efd_item_format(xfs_efd_log_item_t	*efdp,
-		    xfs_log_iovec_t	*log_vector)
+xfs_efd_item_format(
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*log_vector)
 {
-	uint	size;
+	struct xfs_efd_log_item	*efdp = EFD_ITEM(lip);
+	uint			size;
 
 	ASSERT(efdp->efd_next_extent == efdp->efd_format.efd_nextents);
 
@@ -401,48 +371,38 @@
 	size += (efdp->efd_format.efd_nextents - 1) * sizeof(xfs_extent_t);
 	efdp->efd_format.efd_size = 1;
 
-	log_vector->i_addr = (xfs_caddr_t)&(efdp->efd_format);
+	log_vector->i_addr = &efdp->efd_format;
 	log_vector->i_len = size;
 	log_vector->i_type = XLOG_REG_TYPE_EFD_FORMAT;
 	ASSERT(size >= sizeof(xfs_efd_log_format_t));
 }
 
-
 /*
  * Pinning has no meaning for an efd item, so just return.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_pin(xfs_efd_log_item_t *efdp)
+xfs_efd_item_pin(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
-
 /*
  * Since pinning has no meaning for an efd item, unpinning does
  * not either.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_unpin(xfs_efd_log_item_t *efdp)
+xfs_efd_item_unpin(
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	return;
-}
-
-/*ARGSUSED*/
-STATIC void
-xfs_efd_item_unpin_remove(xfs_efd_log_item_t *efdp, xfs_trans_t *tp)
-{
-	return;
 }
 
 /*
  * Efd items have no locking, so just return success.
  */
-/*ARGSUSED*/
 STATIC uint
-xfs_efd_item_trylock(xfs_efd_log_item_t *efdp)
+xfs_efd_item_trylock(
+	struct xfs_log_item	*lip)
 {
 	return XFS_ITEM_LOCKED;
 }
@@ -451,13 +411,12 @@
  * Efd items have no locking or pushing, so return failure
  * so that the caller doesn't bother with us.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_unlock(xfs_efd_log_item_t *efdp)
+xfs_efd_item_unlock(
+	struct xfs_log_item	*lip)
 {
-	if (efdp->efd_item.li_flags & XFS_LI_ABORTED)
-		xfs_efd_item_free(efdp);
-	return;
+	if (lip->li_flags & XFS_LI_ABORTED)
+		xfs_efd_item_free(EFD_ITEM(lip));
 }
 
 /*
@@ -467,15 +426,18 @@
  * return -1 to keep the transaction code from further referencing
  * this item.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
-xfs_efd_item_committed(xfs_efd_log_item_t *efdp, xfs_lsn_t lsn)
+xfs_efd_item_committed(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
+	struct xfs_efd_log_item	*efdp = EFD_ITEM(lip);
+
 	/*
 	 * If we got a log I/O error, it's always the case that the LR with the
 	 * EFI got unpinned and freed before the EFD got aborted.
 	 */
-	if ((efdp->efd_item.li_flags & XFS_LI_ABORTED) == 0)
+	if (!(lip->li_flags & XFS_LI_ABORTED))
 		xfs_efi_release(efdp->efd_efip, efdp->efd_format.efd_nextents);
 
 	xfs_efd_item_free(efdp);
@@ -486,11 +448,10 @@
  * There isn't much you can do to push on an efd item.  It is simply
  * stuck waiting for the log to be flushed to disk.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_push(xfs_efd_log_item_t *efdp)
+xfs_efd_item_push(
+	struct xfs_log_item	*lip)
 {
-	return;
 }
 
 /*
@@ -500,55 +461,48 @@
  * example, for inodes, the inode is locked throughout the extent freeing
  * so the dependency should be recorded there.
  */
-/*ARGSUSED*/
 STATIC void
-xfs_efd_item_committing(xfs_efd_log_item_t *efip, xfs_lsn_t lsn)
+xfs_efd_item_committing(
+	struct xfs_log_item	*lip,
+	xfs_lsn_t		lsn)
 {
-	return;
 }
 
 /*
  * This is the ops vector shared by all efd log items.
  */
 static struct xfs_item_ops xfs_efd_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_efd_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_efd_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_efd_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_efd_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_efd_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_efd_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_efd_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efd_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_efd_item_push,
-	.iop_pushbuf	= NULL,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_efd_item_committing
+	.iop_size	= xfs_efd_item_size,
+	.iop_format	= xfs_efd_item_format,
+	.iop_pin	= xfs_efd_item_pin,
+	.iop_unpin	= xfs_efd_item_unpin,
+	.iop_trylock	= xfs_efd_item_trylock,
+	.iop_unlock	= xfs_efd_item_unlock,
+	.iop_committed	= xfs_efd_item_committed,
+	.iop_push	= xfs_efd_item_push,
+	.iop_committing = xfs_efd_item_committing
 };
 
-
 /*
  * Allocate and initialize an efd item with the given number of extents.
  */
-xfs_efd_log_item_t *
-xfs_efd_init(xfs_mount_t	*mp,
-	     xfs_efi_log_item_t	*efip,
-	     uint		nextents)
+struct xfs_efd_log_item *
+xfs_efd_init(
+	struct xfs_mount	*mp,
+	struct xfs_efi_log_item	*efip,
+	uint			nextents)
 
 {
-	xfs_efd_log_item_t	*efdp;
+	struct xfs_efd_log_item	*efdp;
 	uint			size;
 
 	ASSERT(nextents > 0);
 	if (nextents > XFS_EFD_MAX_FAST_EXTENTS) {
 		size = (uint)(sizeof(xfs_efd_log_item_t) +
 			((nextents - 1) * sizeof(xfs_extent_t)));
-		efdp = (xfs_efd_log_item_t*)kmem_zalloc(size, KM_SLEEP);
+		efdp = kmem_zalloc(size, KM_SLEEP);
 	} else {
-		efdp = (xfs_efd_log_item_t*)kmem_zone_zalloc(xfs_efd_zone,
-							     KM_SLEEP);
+		efdp = kmem_zone_zalloc(xfs_efd_zone, KM_SLEEP);
 	}
 
 	xfs_log_item_init(mp, &efdp->efd_item, XFS_LI_EFD, &xfs_efd_item_ops);
@@ -556,5 +510,5 @@
 	efdp->efd_format.efd_nextents = nextents;
 	efdp->efd_format.efd_efi_id = efip->efi_format.efi_id;
 
-	return (efdp);
+	return efdp;
 }
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 390850e..9b715dc 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -18,13 +18,9 @@
 #include "xfs.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_inum.h"
-#include "xfs_dir2.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_log.h"
 #include "xfs_trans.h"
 #include "xfs_sb.h"
@@ -127,6 +123,82 @@
 	xfs_inode_t	*pip;	/* Parent directory inode pointer. */
 } fstrm_item_t;
 
+/*
+ * Allocation group filestream associations are tracked with per-ag atomic
+ * counters.  These counters allow _xfs_filestream_pick_ag() to tell whether a
+ * particular AG already has active filestreams associated with it. The mount
+ * point's m_peraglock is used to protect these counters from per-ag array
+ * re-allocation during a growfs operation.  When xfs_growfs_data_private() is
+ * about to reallocate the array, it calls xfs_filestream_flush() with the
+ * m_peraglock held in write mode.
+ *
+ * Since xfs_mru_cache_flush() guarantees that all the free functions for all
+ * the cache elements have finished executing before it returns, it's safe for
+ * the free functions to use the atomic counters without m_peraglock protection.
+ * This allows the implementation of xfs_fstrm_free_func() to be agnostic about
+ * whether it was called with the m_peraglock held in read mode, write mode or
+ * not held at all.  The race condition this addresses is the following:
+ *
+ *  - The work queue scheduler fires and pulls a filestream directory cache
+ *    element off the LRU end of the cache for deletion, then gets pre-empted.
+ *  - A growfs operation grabs the m_peraglock in write mode, flushes all the
+ *    remaining items from the cache and reallocates the mount point's per-ag
+ *    array, resetting all the counters to zero.
+ *  - The work queue thread resumes and calls the free function for the element
+ *    it started cleaning up earlier.  In the process it decrements the
+ *    filestreams counter for an AG that now has no references.
+ *
+ * With a shrinkfs feature, the above scenario could panic the system.
+ *
+ * All other uses of the following macros should be protected by either the
+ * m_peraglock held in read mode, or the cache's internal locking exposed by the
+ * interval between a call to xfs_mru_cache_lookup() and a call to
+ * xfs_mru_cache_done().  In addition, the m_peraglock must be held in read mode
+ * when new elements are added to the cache.
+ *
+ * Combined, these locking rules ensure that no associations will ever exist in
+ * the cache that reference per-ag array elements that have since been
+ * reallocated.
+ */
+static int
+xfs_filestream_peek_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+	int		ret;
+
+	pag = xfs_perag_get(mp, agno);
+	ret = atomic_read(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+	return ret;
+}
+
+static int
+xfs_filestream_get_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+	int		ret;
+
+	pag = xfs_perag_get(mp, agno);
+	ret = atomic_inc_return(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+	return ret;
+}
+
+static void
+xfs_filestream_put_ag(
+	xfs_mount_t	*mp,
+	xfs_agnumber_t	agno)
+{
+	struct xfs_perag *pag;
+
+	pag = xfs_perag_get(mp, agno);
+	atomic_dec(&pag->pagf_fstrms);
+	xfs_perag_put(pag);
+}
 
 /*
  * Scan the AGs starting at startag looking for an AG that isn't in use and has
@@ -355,16 +427,14 @@
 {
 	fstrm_item_t	*item  = (fstrm_item_t *)data;
 	xfs_inode_t	*ip = item->ip;
-	int ref;
 
 	ASSERT(ip->i_ino == ino);
 
 	xfs_iflags_clear(ip, XFS_IFILESTREAM);
 
 	/* Drop the reference taken on the AG when the item was added. */
-	ref = xfs_filestream_put_ag(ip->i_mount, item->ag);
+	xfs_filestream_put_ag(ip->i_mount, item->ag);
 
-	ASSERT(ref >= 0);
 	TRACE_FREE(ip->i_mount, ip, item->pip, item->ag,
 		xfs_filestream_peek_ag(ip->i_mount, item->ag));
 
diff --git a/fs/xfs/xfs_filestream.h b/fs/xfs/xfs_filestream.h
index 260f757..09dd9af 100644
--- a/fs/xfs/xfs_filestream.h
+++ b/fs/xfs/xfs_filestream.h
@@ -42,88 +42,6 @@
 
 #endif
 
-/*
- * Allocation group filestream associations are tracked with per-ag atomic
- * counters.  These counters allow _xfs_filestream_pick_ag() to tell whether a
- * particular AG already has active filestreams associated with it. The mount
- * point's m_peraglock is used to protect these counters from per-ag array
- * re-allocation during a growfs operation.  When xfs_growfs_data_private() is
- * about to reallocate the array, it calls xfs_filestream_flush() with the
- * m_peraglock held in write mode.
- *
- * Since xfs_mru_cache_flush() guarantees that all the free functions for all
- * the cache elements have finished executing before it returns, it's safe for
- * the free functions to use the atomic counters without m_peraglock protection.
- * This allows the implementation of xfs_fstrm_free_func() to be agnostic about
- * whether it was called with the m_peraglock held in read mode, write mode or
- * not held at all.  The race condition this addresses is the following:
- *
- *  - The work queue scheduler fires and pulls a filestream directory cache
- *    element off the LRU end of the cache for deletion, then gets pre-empted.
- *  - A growfs operation grabs the m_peraglock in write mode, flushes all the
- *    remaining items from the cache and reallocates the mount point's per-ag
- *    array, resetting all the counters to zero.
- *  - The work queue thread resumes and calls the free function for the element
- *    it started cleaning up earlier.  In the process it decrements the
- *    filestreams counter for an AG that now has no references.
- *
- * With a shrinkfs feature, the above scenario could panic the system.
- *
- * All other uses of the following macros should be protected by either the
- * m_peraglock held in read mode, or the cache's internal locking exposed by the
- * interval between a call to xfs_mru_cache_lookup() and a call to
- * xfs_mru_cache_done().  In addition, the m_peraglock must be held in read mode
- * when new elements are added to the cache.
- *
- * Combined, these locking rules ensure that no associations will ever exist in
- * the cache that reference per-ag array elements that have since been
- * reallocated.
- */
-/*
- * xfs_filestream_peek_ag is only used in tracing code
- */
-static inline int
-xfs_filestream_peek_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_read(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
-static inline int
-xfs_filestream_get_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_inc_return(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
-static inline int
-xfs_filestream_put_ag(
-	xfs_mount_t	*mp,
-	xfs_agnumber_t	agno)
-{
-	struct xfs_perag *pag;
-	int		ret;
-
-	pag = xfs_perag_get(mp, agno);
-	ret = atomic_dec_return(&pag->pagf_fstrms);
-	xfs_perag_put(pag);
-	return ret;
-}
-
 /* allocation selection flags */
 typedef enum xfs_fstrm_alloc {
 	XFS_PICK_USERDATA = 1,
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index 37a6f62..dbca5f5 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -626,8 +622,7 @@
 	ip = mp->m_rootip;
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	xfs_trans_set_sync(tp);
 	error = xfs_trans_commit(tp, 0);
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 9d884c1..abf80ae 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -1203,6 +1199,63 @@
 	return error;
 }
 
+STATIC int
+xfs_imap_lookup(
+	struct xfs_mount	*mp,
+	struct xfs_trans	*tp,
+	xfs_agnumber_t		agno,
+	xfs_agino_t		agino,
+	xfs_agblock_t		agbno,
+	xfs_agblock_t		*chunk_agbno,
+	xfs_agblock_t		*offset_agbno,
+	int			flags)
+{
+	struct xfs_inobt_rec_incore rec;
+	struct xfs_btree_cur	*cur;
+	struct xfs_buf		*agbp;
+	xfs_agino_t		startino;
+	int			error;
+	int			i;
+
+	error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
+	if (error) {
+		xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
+				"xfs_ialloc_read_agi() returned "
+				"error %d, agno %d",
+				error, agno);
+		return error;
+	}
+
+	/*
+	 * derive and lookup the exact inode record for the given agino. If the
+	 * record cannot be found, then it's an invalid inode number and we
+	 * should abort.
+	 */
+	cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
+	startino = agino & ~(XFS_IALLOC_INODES(mp) - 1);
+	error = xfs_inobt_lookup(cur, startino, XFS_LOOKUP_EQ, &i);
+	if (!error) {
+		if (i)
+			error = xfs_inobt_get_rec(cur, &rec, &i);
+		if (!error && i == 0)
+			error = EINVAL;
+	}
+
+	xfs_trans_brelse(tp, agbp);
+	xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+	if (error)
+		return error;
+
+	/* for untrusted inodes check it is allocated first */
+	if ((flags & XFS_IGET_UNTRUSTED) &&
+	    (rec.ir_free & XFS_INOBT_MASK(agino - rec.ir_startino)))
+		return EINVAL;
+
+	*chunk_agbno = XFS_AGINO_TO_AGBNO(mp, rec.ir_startino);
+	*offset_agbno = agbno - *chunk_agbno;
+	return 0;
+}
+
 /*
  * Return the location of the inode in imap, for mapping it into a buffer.
  */
@@ -1235,8 +1288,11 @@
 	if (agno >= mp->m_sb.sb_agcount || agbno >= mp->m_sb.sb_agblocks ||
 	    ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
 #ifdef DEBUG
-		/* no diagnostics for bulkstat, ino comes from userspace */
-		if (flags & XFS_IGET_BULKSTAT)
+		/*
+		 * Don't output diagnostic information for untrusted inodes
+		 * as they can be invalid without implying corruption.
+		 */
+		if (flags & XFS_IGET_UNTRUSTED)
 			return XFS_ERROR(EINVAL);
 		if (agno >= mp->m_sb.sb_agcount) {
 			xfs_fs_cmn_err(CE_ALERT, mp,
@@ -1263,6 +1319,23 @@
 		return XFS_ERROR(EINVAL);
 	}
 
+	blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
+
+	/*
+	 * For bulkstat and handle lookups, we have an untrusted inode number
+	 * that we have to verify is valid. We cannot do this just by reading
+	 * the inode buffer as it may have been unlinked and removed leaving
+	 * inodes in stale state on disk. Hence we have to do a btree lookup
+	 * in all cases where an untrusted inode number is passed.
+	 */
+	if (flags & XFS_IGET_UNTRUSTED) {
+		error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+					&chunk_agbno, &offset_agbno, flags);
+		if (error)
+			return error;
+		goto out_map;
+	}
+
 	/*
 	 * If the inode cluster size is the same as the blocksize or
 	 * smaller we get to the buffer by simple arithmetics.
@@ -1277,24 +1350,6 @@
 		return 0;
 	}
 
-	blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_blocklog;
-
-	/*
-	 * If we get a block number passed from bulkstat we can use it to
-	 * find the buffer easily.
-	 */
-	if (imap->im_blkno) {
-		offset = XFS_INO_TO_OFFSET(mp, ino);
-		ASSERT(offset < mp->m_sb.sb_inopblock);
-
-		cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
-		offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
-
-		imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
-		imap->im_boffset = (ushort)(offset << mp->m_sb.sb_inodelog);
-		return 0;
-	}
-
 	/*
 	 * If the inode chunks are aligned then use simple maths to
 	 * find the location. Otherwise we have to do a btree
@@ -1304,50 +1359,13 @@
 		offset_agbno = agbno & mp->m_inoalign_mask;
 		chunk_agbno = agbno - offset_agbno;
 	} else {
-		xfs_btree_cur_t	*cur;	/* inode btree cursor */
-		xfs_inobt_rec_incore_t chunk_rec;
-		xfs_buf_t	*agbp;	/* agi buffer */
-		int		i;	/* temp state */
-
-		error = xfs_ialloc_read_agi(mp, tp, agno, &agbp);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_ialloc_read_agi() returned "
-					"error %d, agno %d",
-					error, agno);
-			return error;
-		}
-
-		cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
-		error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_lookup() failed");
-			goto error0;
-		}
-
-		error = xfs_inobt_get_rec(cur, &chunk_rec, &i);
-		if (error) {
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_get_rec() failed");
-			goto error0;
-		}
-		if (i == 0) {
-#ifdef DEBUG
-			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_get_rec() failed");
-#endif /* DEBUG */
-			error = XFS_ERROR(EINVAL);
-		}
- error0:
-		xfs_trans_brelse(tp, agbp);
-		xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+		error = xfs_imap_lookup(mp, tp, agno, agino, agbno,
+					&chunk_agbno, &offset_agbno, flags);
 		if (error)
 			return error;
-		chunk_agbno = XFS_AGINO_TO_AGBNO(mp, chunk_rec.ir_startino);
-		offset_agbno = agbno - chunk_agbno;
 	}
 
+out_map:
 	ASSERT(agbno >= chunk_agbno);
 	cluster_agbno = chunk_agbno +
 		((offset_agbno / blks_per_cluster) * blks_per_cluster);
diff --git a/fs/xfs/xfs_ialloc_btree.c b/fs/xfs/xfs_ialloc_btree.c
index c282a9a..d352862 100644
--- a/fs/xfs/xfs_ialloc_btree.c
+++ b/fs/xfs/xfs_ialloc_btree.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 6845db9..b1ecc6f 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -25,14 +25,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -95,7 +91,7 @@
 	return ip;
 }
 
-STATIC void
+void
 xfs_inode_free(
 	struct xfs_inode	*ip)
 {
@@ -212,7 +208,7 @@
 			ip->i_flags &= ~XFS_INEW;
 			ip->i_flags |= XFS_IRECLAIMABLE;
 			__xfs_inode_set_reclaim_tag(pag, ip);
-			trace_xfs_iget_reclaim(ip);
+			trace_xfs_iget_reclaim_fail(ip);
 			goto out_error;
 		}
 
@@ -227,6 +223,7 @@
 	} else {
 		/* If the VFS inode is being torn down, pause and try again. */
 		if (!igrab(inode)) {
+			trace_xfs_iget_skip(ip);
 			error = EAGAIN;
 			goto out_error;
 		}
@@ -234,6 +231,7 @@
 		/* We've got a live one. */
 		spin_unlock(&ip->i_flags_lock);
 		read_unlock(&pag->pag_ici_lock);
+		trace_xfs_iget_hit(ip);
 	}
 
 	if (lock_flags != 0)
@@ -242,7 +240,6 @@
 	xfs_iflags_clear(ip, XFS_ISTALE);
 	XFS_STATS_INC(xs_ig_found);
 
-	trace_xfs_iget_found(ip);
 	return 0;
 
 out_error:
@@ -259,24 +256,22 @@
 	xfs_trans_t		*tp,
 	xfs_ino_t		ino,
 	struct xfs_inode	**ipp,
-	xfs_daddr_t		bno,
 	int			flags,
 	int			lock_flags)
 {
 	struct xfs_inode	*ip;
 	int			error;
-	unsigned long		first_index, mask;
 	xfs_agino_t		agino = XFS_INO_TO_AGINO(mp, ino);
 
 	ip = xfs_inode_alloc(mp, ino);
 	if (!ip)
 		return ENOMEM;
 
-	error = xfs_iread(mp, tp, ip, bno, flags);
+	error = xfs_iread(mp, tp, ip, flags);
 	if (error)
 		goto out_destroy;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_iget_miss(ip);
 
 	if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) {
 		error = ENOENT;
@@ -302,8 +297,6 @@
 			BUG();
 	}
 
-	mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
-	first_index = agino & mask;
 	write_lock(&pag->pag_ici_lock);
 
 	/* insert the new inode */
@@ -322,7 +315,6 @@
 	write_unlock(&pag->pag_ici_lock);
 	radix_tree_preload_end();
 
-	trace_xfs_iget_alloc(ip);
 	*ipp = ip;
 	return 0;
 
@@ -358,8 +350,6 @@
  *        within the file system for the inode being requested.
  * lock_flags -- flags indicating how to lock the inode.  See the comment
  *		 for xfs_ilock() for a list of valid values.
- * bno -- the block number starting the buffer containing the inode,
- *	  if known (as by bulkstat), else 0.
  */
 int
 xfs_iget(
@@ -368,8 +358,7 @@
 	xfs_ino_t	ino,
 	uint		flags,
 	uint		lock_flags,
-	xfs_inode_t	**ipp,
-	xfs_daddr_t	bno)
+	xfs_inode_t	**ipp)
 {
 	xfs_inode_t	*ip;
 	int		error;
@@ -382,9 +371,6 @@
 
 	/* get the perag structure and ensure that it's inode capable */
 	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
-	if (!pag->pagi_inodeok)
-		return EINVAL;
-	ASSERT(pag->pag_ici_init);
 	agino = XFS_INO_TO_AGINO(mp, ino);
 
 again:
@@ -400,7 +386,7 @@
 		read_unlock(&pag->pag_ici_lock);
 		XFS_STATS_INC(xs_ig_missed);
 
-		error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip, bno,
+		error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
 							flags, lock_flags);
 		if (error)
 			goto out_error_or_again;
@@ -429,97 +415,6 @@
 }
 
 /*
- * Decrement reference count of an inode structure and unlock it.
- *
- * ip -- the inode being released
- * lock_flags -- this parameter indicates the inode's locks to be
- *       to be released.  See the comment on xfs_iunlock() for a list
- *	 of valid values.
- */
-void
-xfs_iput(xfs_inode_t	*ip,
-	 uint		lock_flags)
-{
-	xfs_itrace_entry(ip);
-	xfs_iunlock(ip, lock_flags);
-	IRELE(ip);
-}
-
-/*
- * Special iput for brand-new inodes that are still locked
- */
-void
-xfs_iput_new(
-	xfs_inode_t	*ip,
-	uint		lock_flags)
-{
-	struct inode	*inode = VFS_I(ip);
-
-	xfs_itrace_entry(ip);
-
-	if ((ip->i_d.di_mode == 0)) {
-		ASSERT(!xfs_iflags_test(ip, XFS_IRECLAIMABLE));
-		make_bad_inode(inode);
-	}
-	if (inode->i_state & I_NEW)
-		unlock_new_inode(inode);
-	if (lock_flags)
-		xfs_iunlock(ip, lock_flags);
-	IRELE(ip);
-}
-
-/*
- * This is called free all the memory associated with an inode.
- * It must free the inode itself and any buffers allocated for
- * if_extents/if_data and if_broot.  It must also free the lock
- * associated with the inode.
- *
- * Note: because we don't initialise everything on reallocation out
- * of the zone, we must ensure we nullify everything correctly before
- * freeing the structure.
- */
-void
-xfs_ireclaim(
-	struct xfs_inode	*ip)
-{
-	struct xfs_mount	*mp = ip->i_mount;
-	struct xfs_perag	*pag;
-	xfs_agino_t		agino = XFS_INO_TO_AGINO(mp, ip->i_ino);
-
-	XFS_STATS_INC(xs_ig_reclaims);
-
-	/*
-	 * Remove the inode from the per-AG radix tree.
-	 *
-	 * Because radix_tree_delete won't complain even if the item was never
-	 * added to the tree assert that it's been there before to catch
-	 * problems with the inode life time early on.
-	 */
-	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
-	write_lock(&pag->pag_ici_lock);
-	if (!radix_tree_delete(&pag->pag_ici_root, agino))
-		ASSERT(0);
-	write_unlock(&pag->pag_ici_lock);
-	xfs_perag_put(pag);
-
-	/*
-	 * Here we do an (almost) spurious inode lock in order to coordinate
-	 * with inode cache radix tree lookups.  This is because the lookup
-	 * can reference the inodes in the cache without taking references.
-	 *
-	 * We make that OK here by ensuring that we wait until the inode is
-	 * unlocked after the lookup before we go ahead and free it.  We get
-	 * both the ilock and the iolock because the code may need to drop the
-	 * ilock one but will still hold the iolock.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_qm_dqdetach(ip);
-	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	xfs_inode_free(ip);
-}
-
-/*
  * This is a wrapper routine around the xfs_ilock() routine
  * used to centralize some grungy code.  It is used in places
  * that wish to lock the inode solely for reading the extents.
@@ -744,30 +639,24 @@
 }
 
 #ifdef DEBUG
-/*
- * Debug-only routine, without additional rw_semaphore APIs, we can
- * now only answer requests regarding whether we hold the lock for write
- * (reader state is outside our visibility, we only track writer state).
- *
- * Note: this means !xfs_isilocked would give false positives, so don't do that.
- */
 int
 xfs_isilocked(
 	xfs_inode_t		*ip,
 	uint			lock_flags)
 {
-	if ((lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) ==
-			XFS_ILOCK_EXCL) {
-		if (!ip->i_lock.mr_writer)
-			return 0;
+	if (lock_flags & (XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)) {
+		if (!(lock_flags & XFS_ILOCK_SHARED))
+			return !!ip->i_lock.mr_writer;
+		return rwsem_is_locked(&ip->i_lock.mr_lock);
 	}
 
-	if ((lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) ==
-			XFS_IOLOCK_EXCL) {
-		if (!ip->i_iolock.mr_writer)
-			return 0;
+	if (lock_flags & (XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED)) {
+		if (!(lock_flags & XFS_IOLOCK_SHARED))
+			return !!ip->i_iolock.mr_writer;
+		return rwsem_is_locked(&ip->i_iolock.mr_lock);
 	}
 
-	return 1;
+	ASSERT(0);
+	return 0;
 }
 #endif
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 8cd6e8d..68415cb 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -27,13 +27,10 @@
 #include "xfs_trans_priv.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
 #include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
@@ -44,7 +41,6 @@
 #include "xfs_alloc.h"
 #include "xfs_ialloc.h"
 #include "xfs_bmap.h"
-#include "xfs_rw.h"
 #include "xfs_error.h"
 #include "xfs_utils.h"
 #include "xfs_quota.h"
@@ -177,7 +173,7 @@
 		if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
 						XFS_ERRTAG_ITOBP_INOTOBP,
 						XFS_RANDOM_ITOBP_INOTOBP))) {
-			if (iget_flags & XFS_IGET_BULKSTAT) {
+			if (iget_flags & XFS_IGET_UNTRUSTED) {
 				xfs_trans_brelse(tp, bp);
 				return XFS_ERROR(EINVAL);
 			}
@@ -426,7 +422,7 @@
 	if (!XFS_DFORK_Q(dip))
 		return 0;
 	ASSERT(ip->i_afp == NULL);
-	ip->i_afp = kmem_zone_zalloc(xfs_ifork_zone, KM_SLEEP);
+	ip->i_afp = kmem_zone_zalloc(xfs_ifork_zone, KM_SLEEP | KM_NOFS);
 	ip->i_afp->if_ext_max =
 		XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
 	switch (dip->di_aformat) {
@@ -509,7 +505,7 @@
 		ifp->if_u1.if_data = ifp->if_u2.if_inline_data;
 	else {
 		real_size = roundup(size, 4);
-		ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+		ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP | KM_NOFS);
 	}
 	ifp->if_bytes = size;
 	ifp->if_real_bytes = real_size;
@@ -636,7 +632,7 @@
 	}
 
 	ifp->if_broot_bytes = size;
-	ifp->if_broot = kmem_alloc(size, KM_SLEEP);
+	ifp->if_broot = kmem_alloc(size, KM_SLEEP | KM_NOFS);
 	ASSERT(ifp->if_broot != NULL);
 	/*
 	 * Copy and convert from the on-disk structure
@@ -787,7 +783,6 @@
 	xfs_mount_t	*mp,
 	xfs_trans_t	*tp,
 	xfs_inode_t	*ip,
-	xfs_daddr_t	bno,
 	uint		iget_flags)
 {
 	xfs_buf_t	*bp;
@@ -797,11 +792,9 @@
 	/*
 	 * Fill in the location information in the in-core inode.
 	 */
-	ip->i_imap.im_blkno = bno;
 	error = xfs_imap(mp, tp, ip->i_ino, &ip->i_imap, iget_flags);
 	if (error)
 		return error;
-	ASSERT(bno == 0 || bno == ip->i_imap.im_blkno);
 
 	/*
 	 * Get pointers to the on-disk inode and the buffer containing it.
@@ -925,7 +918,6 @@
 	int		error;
 	xfs_ifork_t	*ifp;
 	xfs_extnum_t	nextents;
-	size_t		size;
 
 	if (unlikely(XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)) {
 		XFS_ERROR_REPORT("xfs_iread_extents", XFS_ERRLEVEL_LOW,
@@ -933,7 +925,6 @@
 		return XFS_ERROR(EFSCORRUPTED);
 	}
 	nextents = XFS_IFORK_NEXTENTS(ip, whichfork);
-	size = nextents * sizeof(xfs_bmbt_rec_t);
 	ifp = XFS_IFORK_PTR(ip, whichfork);
 
 	/*
@@ -1229,7 +1220,7 @@
 				       (xfs_ufsize_t)XFS_MAXIOFFSET(mp)) -
 			  map_first),
 			 XFS_BMAPI_ENTIRE, NULL, 0, imaps, &nimaps,
-			 NULL, NULL))
+			 NULL))
 	    return;
 	ASSERT(nimaps == 1);
 	ASSERT(imaps[0].br_startblock == HOLESTARTBLOCK);
@@ -1463,7 +1454,7 @@
 	ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
 	ASSERT(ip->i_transp == *tp);
 	ASSERT(ip->i_itemp != NULL);
-	ASSERT(ip->i_itemp->ili_flags & XFS_ILI_HOLD);
+	ASSERT(ip->i_itemp->ili_lock_flags == 0);
 
 
 	ntp = *tp;
@@ -1592,11 +1583,10 @@
 		xfs_bmap_init(&free_list, &first_block);
 		error = xfs_bunmapi(ntp, ip,
 				    first_unmap_block, unmap_len,
-				    xfs_bmapi_aflag(fork) |
-				      (sync ? 0 : XFS_BMAPI_ASYNC),
+				    xfs_bmapi_aflag(fork),
 				    XFS_ITRUNC_MAX_EXTENTS,
 				    &first_block, &free_list,
-				    NULL, &done);
+				    &done);
 		if (error) {
 			/*
 			 * If the bunmapi call encounters an error,
@@ -1615,12 +1605,8 @@
 		 */
 		error = xfs_bmap_finish(tp, &free_list, &committed);
 		ntp = *tp;
-		if (committed) {
-			/* link the inode into the next xact in the chain */
-			xfs_trans_ijoin(ntp, ip,
-					XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-			xfs_trans_ihold(ntp, ip);
-		}
+		if (committed)
+			xfs_trans_ijoin(ntp, ip);
 
 		if (error) {
 			/*
@@ -1649,9 +1635,7 @@
 		error = xfs_trans_commit(*tp, 0);
 		*tp = ntp;
 
-		/* link the inode into the next transaction in the chain */
-		xfs_trans_ijoin(ntp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-		xfs_trans_ihold(ntp, ip);
+		xfs_trans_ijoin(ntp, ip);
 
 		if (error)
 			return error;
@@ -1940,10 +1924,10 @@
 	int			blks_per_cluster;
 	int			nbufs;
 	int			ninodes;
-	int			i, j, found, pre_flushed;
+	int			i, j;
 	xfs_daddr_t		blkno;
 	xfs_buf_t		*bp;
-	xfs_inode_t		*ip, **ip_found;
+	xfs_inode_t		*ip;
 	xfs_inode_log_item_t	*iip;
 	xfs_log_item_t		*lip;
 	struct xfs_perag	*pag;
@@ -1960,114 +1944,97 @@
 		nbufs = XFS_IALLOC_BLOCKS(mp) / blks_per_cluster;
 	}
 
-	ip_found = kmem_alloc(ninodes * sizeof(xfs_inode_t *), KM_NOFS);
-
 	for (j = 0; j < nbufs; j++, inum += ninodes) {
+		int	found = 0;
+
 		blkno = XFS_AGB_TO_DADDR(mp, XFS_INO_TO_AGNO(mp, inum),
 					 XFS_INO_TO_AGBNO(mp, inum));
 
-
 		/*
-		 * Look for each inode in memory and attempt to lock it,
-		 * we can be racing with flush and tail pushing here.
-		 * any inode we get the locks on, add to an array of
-		 * inode items to process later.
-		 *
-		 * The get the buffer lock, we could beat a flush
-		 * or tail pushing thread to the lock here, in which
-		 * case they will go looking for the inode buffer
-		 * and fail, we need some other form of interlock
-		 * here.
+		 * We obtain and lock the backing buffer first in the process
+		 * here, as we have to ensure that any dirty inode that we
+		 * can't get the flush lock on is attached to the buffer.
+		 * If we scan the in-memory inodes first, then buffer IO can
+		 * complete before we get a lock on it, and hence we may fail
+		 * to mark all the active inodes on the buffer stale.
 		 */
-		found = 0;
-		for (i = 0; i < ninodes; i++) {
-			read_lock(&pag->pag_ici_lock);
-			ip = radix_tree_lookup(&pag->pag_ici_root,
-					XFS_INO_TO_AGINO(mp, (inum + i)));
-
-			/* Inode not in memory or we found it already,
-			 * nothing to do
-			 */
-			if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-
-			if (xfs_inode_clean(ip)) {
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-
-			/* If we can get the locks then add it to the
-			 * list, otherwise by the time we get the bp lock
-			 * below it will already be attached to the
-			 * inode buffer.
-			 */
-
-			/* This inode will already be locked - by us, lets
-			 * keep it that way.
-			 */
-
-			if (ip == free_ip) {
-				if (xfs_iflock_nowait(ip)) {
-					xfs_iflags_set(ip, XFS_ISTALE);
-					if (xfs_inode_clean(ip)) {
-						xfs_ifunlock(ip);
-					} else {
-						ip_found[found++] = ip;
-					}
-				}
-				read_unlock(&pag->pag_ici_lock);
-				continue;
-			}
-
-			if (xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
-				if (xfs_iflock_nowait(ip)) {
-					xfs_iflags_set(ip, XFS_ISTALE);
-
-					if (xfs_inode_clean(ip)) {
-						xfs_ifunlock(ip);
-						xfs_iunlock(ip, XFS_ILOCK_EXCL);
-					} else {
-						ip_found[found++] = ip;
-					}
-				} else {
-					xfs_iunlock(ip, XFS_ILOCK_EXCL);
-				}
-			}
-			read_unlock(&pag->pag_ici_lock);
-		}
-
-		bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno, 
+		bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
 					mp->m_bsize * blks_per_cluster,
 					XBF_LOCK);
 
-		pre_flushed = 0;
+		/*
+		 * Walk the inodes already attached to the buffer and mark them
+		 * stale. These will all have the flush locks held, so an
+		 * in-memory inode walk can't lock them.
+		 */
 		lip = XFS_BUF_FSPRIVATE(bp, xfs_log_item_t *);
 		while (lip) {
 			if (lip->li_type == XFS_LI_INODE) {
 				iip = (xfs_inode_log_item_t *)lip;
 				ASSERT(iip->ili_logged == 1);
-				lip->li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*)) xfs_istale_done;
+				lip->li_cb = xfs_istale_done;
 				xfs_trans_ail_copy_lsn(mp->m_ail,
 							&iip->ili_flush_lsn,
 							&iip->ili_item.li_lsn);
 				xfs_iflags_set(iip->ili_inode, XFS_ISTALE);
-				pre_flushed++;
+				found++;
 			}
 			lip = lip->li_bio_list;
 		}
 
-		for (i = 0; i < found; i++) {
-			ip = ip_found[i];
-			iip = ip->i_itemp;
+		/*
+		 * For each inode in memory attempt to add it to the inode
+		 * buffer and set it up for being staled on buffer IO
+		 * completion.  This is safe as we've locked out tail pushing
+		 * and flushing by locking the buffer.
+		 *
+		 * We have already marked every inode that was part of a
+		 * transaction stale above, which means there is no point in
+		 * even trying to lock them.
+		 */
+		for (i = 0; i < ninodes; i++) {
+			read_lock(&pag->pag_ici_lock);
+			ip = radix_tree_lookup(&pag->pag_ici_root,
+					XFS_INO_TO_AGINO(mp, (inum + i)));
 
+			/* Inode not in memory or stale, nothing to do */
+			if (!ip || xfs_iflags_test(ip, XFS_ISTALE)) {
+				read_unlock(&pag->pag_ici_lock);
+				continue;
+			}
+
+			/* don't try to lock/unlock the current inode */
+			if (ip != free_ip &&
+			    !xfs_ilock_nowait(ip, XFS_ILOCK_EXCL)) {
+				read_unlock(&pag->pag_ici_lock);
+				continue;
+			}
+			read_unlock(&pag->pag_ici_lock);
+
+			if (!xfs_iflock_nowait(ip)) {
+				if (ip != free_ip)
+					xfs_iunlock(ip, XFS_ILOCK_EXCL);
+				continue;
+			}
+
+			xfs_iflags_set(ip, XFS_ISTALE);
+			if (xfs_inode_clean(ip)) {
+				ASSERT(ip != free_ip);
+				xfs_ifunlock(ip);
+				xfs_iunlock(ip, XFS_ILOCK_EXCL);
+				continue;
+			}
+
+			iip = ip->i_itemp;
 			if (!iip) {
+				/* inode with unlogged changes only */
+				ASSERT(ip != free_ip);
 				ip->i_update_core = 0;
 				xfs_ifunlock(ip);
 				xfs_iunlock(ip, XFS_ILOCK_EXCL);
 				continue;
 			}
+			found++;
 
 			iip->ili_last_fields = iip->ili_format.ilf_fields;
 			iip->ili_format.ilf_fields = 0;
@@ -2075,20 +2042,18 @@
 			xfs_trans_ail_copy_lsn(mp->m_ail, &iip->ili_flush_lsn,
 						&iip->ili_item.li_lsn);
 
-			xfs_buf_attach_iodone(bp,
-				(void(*)(xfs_buf_t*,xfs_log_item_t*))
-				xfs_istale_done, (xfs_log_item_t *)iip);
-			if (ip != free_ip) {
+			xfs_buf_attach_iodone(bp, xfs_istale_done,
+						  &iip->ili_item);
+
+			if (ip != free_ip)
 				xfs_iunlock(ip, XFS_ILOCK_EXCL);
-			}
 		}
 
-		if (found || pre_flushed)
+		if (found)
 			xfs_trans_stale_inode_buf(tp, bp);
 		xfs_trans_binval(tp, bp);
 	}
 
-	kmem_free(ip_found);
 	xfs_perag_put(pag);
 }
 
@@ -2224,7 +2189,7 @@
 		 */
 		if (ifp->if_broot_bytes == 0) {
 			new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(rec_diff);
-			ifp->if_broot = kmem_alloc(new_size, KM_SLEEP);
+			ifp->if_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS);
 			ifp->if_broot_bytes = (int)new_size;
 			return;
 		}
@@ -2240,7 +2205,7 @@
 		new_size = (size_t)XFS_BMAP_BROOT_SPACE_CALC(new_max);
 		ifp->if_broot = kmem_realloc(ifp->if_broot, new_size,
 				(size_t)XFS_BMAP_BROOT_SPACE_CALC(cur_max), /* old size */
-				KM_SLEEP);
+				KM_SLEEP | KM_NOFS);
 		op = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1,
 						     ifp->if_broot_bytes);
 		np = (char *)XFS_BMAP_BROOT_PTR_ADDR(mp, ifp->if_broot, 1,
@@ -2266,7 +2231,7 @@
 	else
 		new_size = 0;
 	if (new_size > 0) {
-		new_broot = kmem_alloc(new_size, KM_SLEEP);
+		new_broot = kmem_alloc(new_size, KM_SLEEP | KM_NOFS);
 		/*
 		 * First copy over the btree block header.
 		 */
@@ -2370,7 +2335,8 @@
 		real_size = roundup(new_size, 4);
 		if (ifp->if_u1.if_data == NULL) {
 			ASSERT(ifp->if_real_bytes == 0);
-			ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+			ifp->if_u1.if_data = kmem_alloc(real_size,
+							KM_SLEEP | KM_NOFS);
 		} else if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) {
 			/*
 			 * Only do the realloc if the underlying size
@@ -2381,11 +2347,12 @@
 					kmem_realloc(ifp->if_u1.if_data,
 							real_size,
 							ifp->if_real_bytes,
-							KM_SLEEP);
+							KM_SLEEP | KM_NOFS);
 			}
 		} else {
 			ASSERT(ifp->if_real_bytes == 0);
-			ifp->if_u1.if_data = kmem_alloc(real_size, KM_SLEEP);
+			ifp->if_u1.if_data = kmem_alloc(real_size,
+							KM_SLEEP | KM_NOFS);
 			memcpy(ifp->if_u1.if_data, ifp->if_u2.if_inline_data,
 				ifp->if_bytes);
 		}
@@ -2649,8 +2616,6 @@
 	int			i;
 
 	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
-	ASSERT(pag->pagi_inodeok);
-	ASSERT(pag->pag_ici_init);
 
 	inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
 	ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
@@ -2754,7 +2719,6 @@
 		 * mark it as stale and brelse.
 		 */
 		if (XFS_BUF_IODONE_FUNC(bp)) {
-			XFS_BUF_CLR_BDSTRAT_FUNC(bp);
 			XFS_BUF_UNDONE(bp);
 			XFS_BUF_STALE(bp);
 			XFS_BUF_ERROR(bp,EIO);
@@ -3092,8 +3056,7 @@
 		 * and unlock the inode's flush lock when the inode is
 		 * completely written to disk.
 		 */
-		xfs_buf_attach_iodone(bp, (void(*)(xfs_buf_t*,xfs_log_item_t*))
-				      xfs_iflush_done, (xfs_log_item_t *)iip);
+		xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item);
 
 		ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL);
 		ASSERT(XFS_BUF_IODONE_FUNC(bp) != NULL);
@@ -3537,13 +3500,11 @@
 	xfs_extnum_t	ext_diff;	/* extents to remove in current list */
 	xfs_extnum_t	nex1;		/* number of extents before idx */
 	xfs_extnum_t	nex2;		/* extents after idx + count */
-	int		nlists;		/* entries in indirection array */
 	int		page_idx = idx;	/* index in target extent list */
 
 	ASSERT(ifp->if_flags & XFS_IFEXTIREC);
 	erp = xfs_iext_idx_to_irec(ifp,  &page_idx, &erp_idx, 0);
 	ASSERT(erp != NULL);
-	nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
 	nex1 = page_idx;
 	ext_cnt = count;
 	while (ext_cnt) {
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 9965e40..0898c54 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -442,9 +442,7 @@
  * xfs_iget.c prototypes.
  */
 int		xfs_iget(struct xfs_mount *, struct xfs_trans *, xfs_ino_t,
-			 uint, uint, xfs_inode_t **, xfs_daddr_t);
-void		xfs_iput(xfs_inode_t *, uint);
-void		xfs_iput_new(xfs_inode_t *, uint);
+			 uint, uint, xfs_inode_t **);
 void		xfs_ilock(xfs_inode_t *, uint);
 int		xfs_ilock_nowait(xfs_inode_t *, uint);
 void		xfs_iunlock(xfs_inode_t *, uint);
@@ -452,7 +450,7 @@
 int		xfs_isilocked(xfs_inode_t *, uint);
 uint		xfs_ilock_map_shared(xfs_inode_t *);
 void		xfs_iunlock_map_shared(xfs_inode_t *, uint);
-void		xfs_ireclaim(xfs_inode_t *);
+void		xfs_inode_free(struct xfs_inode *ip);
 
 /*
  * xfs_inode.c prototypes.
@@ -500,7 +498,7 @@
  * Flags for xfs_iget()
  */
 #define XFS_IGET_CREATE		0x1
-#define XFS_IGET_BULKSTAT	0x2
+#define XFS_IGET_UNTRUSTED	0x2
 
 int		xfs_inotobp(struct xfs_mount *, struct xfs_trans *,
 			    xfs_ino_t, struct xfs_dinode **,
@@ -509,7 +507,7 @@
 			  struct xfs_inode *, struct xfs_dinode **,
 			  struct xfs_buf **, uint);
 int		xfs_iread(struct xfs_mount *, struct xfs_trans *,
-			  struct xfs_inode *, xfs_daddr_t, uint);
+			  struct xfs_inode *, uint);
 void		xfs_dinode_to_disk(struct xfs_dinode *,
 				   struct xfs_icdinode *);
 void		xfs_idestroy_fork(struct xfs_inode *, int);
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index cf8249a..fe00777 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -22,30 +22,26 @@
 #include "xfs_log.h"
 #include "xfs_inum.h"
 #include "xfs_trans.h"
-#include "xfs_buf_item.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
-#include "xfs_rw.h"
 #include "xfs_error.h"
 #include "xfs_trace.h"
 
 
 kmem_zone_t	*xfs_ili_zone;		/* inode log item zone */
 
+static inline struct xfs_inode_log_item *INODE_ITEM(struct xfs_log_item *lip)
+{
+	return container_of(lip, struct xfs_inode_log_item, ili_item);
+}
+
+
 /*
  * This returns the number of iovecs needed to log the given inode item.
  *
@@ -55,13 +51,11 @@
  */
 STATIC uint
 xfs_inode_item_size(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	uint		nvecs;
-	xfs_inode_t	*ip;
-
-	ip = iip->ili_inode;
-	nvecs = 2;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	uint			nvecs = 2;
 
 	/*
 	 * Only log the data/extents/b-tree root if there is something
@@ -212,21 +206,17 @@
  */
 STATIC void
 xfs_inode_item_format(
-	xfs_inode_log_item_t	*iip,
-	xfs_log_iovec_t		*log_vector)
+	struct xfs_log_item	*lip,
+	struct xfs_log_iovec	*vecp)
 {
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 	uint			nvecs;
-	xfs_log_iovec_t		*vecp;
-	xfs_inode_t		*ip;
 	size_t			data_bytes;
 	xfs_bmbt_rec_t		*ext_buffer;
-	int			nrecs;
 	xfs_mount_t		*mp;
 
-	ip = iip->ili_inode;
-	vecp = log_vector;
-
-	vecp->i_addr = (xfs_caddr_t)&iip->ili_format;
+	vecp->i_addr = &iip->ili_format;
 	vecp->i_len  = sizeof(xfs_inode_log_format_t);
 	vecp->i_type = XLOG_REG_TYPE_IFORMAT;
 	vecp++;
@@ -277,7 +267,7 @@
 	 */
 	xfs_synchronize_times(ip);
 
-	vecp->i_addr = (xfs_caddr_t)&ip->i_d;
+	vecp->i_addr = &ip->i_d;
 	vecp->i_len  = sizeof(struct xfs_icdinode);
 	vecp->i_type = XLOG_REG_TYPE_ICORE;
 	vecp++;
@@ -323,18 +313,17 @@
 			ASSERT(ip->i_df.if_u1.if_extents != NULL);
 			ASSERT(ip->i_d.di_nextents > 0);
 			ASSERT(iip->ili_extents_buf == NULL);
-			nrecs = ip->i_df.if_bytes /
-				(uint)sizeof(xfs_bmbt_rec_t);
-			ASSERT(nrecs > 0);
+			ASSERT((ip->i_df.if_bytes /
+				(uint)sizeof(xfs_bmbt_rec_t)) > 0);
 #ifdef XFS_NATIVE_HOST
-			if (nrecs == ip->i_d.di_nextents) {
+                       if (ip->i_d.di_nextents == ip->i_df.if_bytes /
+                                               (uint)sizeof(xfs_bmbt_rec_t)) {
 				/*
 				 * There are no delayed allocation
 				 * extents, so just point to the
 				 * real extents array.
 				 */
-				vecp->i_addr =
-					(char *)(ip->i_df.if_u1.if_extents);
+				vecp->i_addr = ip->i_df.if_u1.if_extents;
 				vecp->i_len = ip->i_df.if_bytes;
 				vecp->i_type = XLOG_REG_TYPE_IEXT;
 			} else
@@ -352,7 +341,7 @@
 				ext_buffer = kmem_alloc(ip->i_df.if_bytes,
 					KM_SLEEP);
 				iip->ili_extents_buf = ext_buffer;
-				vecp->i_addr = (xfs_caddr_t)ext_buffer;
+				vecp->i_addr = ext_buffer;
 				vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
 						XFS_DATA_FORK);
 				vecp->i_type = XLOG_REG_TYPE_IEXT;
@@ -371,7 +360,7 @@
 		if (iip->ili_format.ilf_fields & XFS_ILOG_DBROOT) {
 			ASSERT(ip->i_df.if_broot_bytes > 0);
 			ASSERT(ip->i_df.if_broot != NULL);
-			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_broot;
+			vecp->i_addr = ip->i_df.if_broot;
 			vecp->i_len = ip->i_df.if_broot_bytes;
 			vecp->i_type = XLOG_REG_TYPE_IBROOT;
 			vecp++;
@@ -389,7 +378,7 @@
 			ASSERT(ip->i_df.if_u1.if_data != NULL);
 			ASSERT(ip->i_d.di_size > 0);
 
-			vecp->i_addr = (xfs_caddr_t)ip->i_df.if_u1.if_data;
+			vecp->i_addr = ip->i_df.if_u1.if_data;
 			/*
 			 * Round i_bytes up to a word boundary.
 			 * The underlying memory is guaranteed to
@@ -437,7 +426,7 @@
 	 * Assert that no attribute-related log flags are set.
 	 */
 	if (!XFS_IFORK_Q(ip)) {
-		ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
+		ASSERT(nvecs == lip->li_desc->lid_size);
 		iip->ili_format.ilf_size = nvecs;
 		ASSERT(!(iip->ili_format.ilf_fields &
 			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT | XFS_ILOG_AEXT)));
@@ -449,21 +438,21 @@
 		ASSERT(!(iip->ili_format.ilf_fields &
 			 (XFS_ILOG_ADATA | XFS_ILOG_ABROOT)));
 		if (iip->ili_format.ilf_fields & XFS_ILOG_AEXT) {
+#ifdef DEBUG
+			int nrecs = ip->i_afp->if_bytes /
+				(uint)sizeof(xfs_bmbt_rec_t);
+			ASSERT(nrecs > 0);
+			ASSERT(nrecs == ip->i_d.di_anextents);
 			ASSERT(ip->i_afp->if_bytes > 0);
 			ASSERT(ip->i_afp->if_u1.if_extents != NULL);
 			ASSERT(ip->i_d.di_anextents > 0);
-#ifdef DEBUG
-			nrecs = ip->i_afp->if_bytes /
-				(uint)sizeof(xfs_bmbt_rec_t);
 #endif
-			ASSERT(nrecs > 0);
-			ASSERT(nrecs == ip->i_d.di_anextents);
 #ifdef XFS_NATIVE_HOST
 			/*
 			 * There are not delayed allocation extents
 			 * for attributes, so just point at the array.
 			 */
-			vecp->i_addr = (char *)(ip->i_afp->if_u1.if_extents);
+			vecp->i_addr = ip->i_afp->if_u1.if_extents;
 			vecp->i_len = ip->i_afp->if_bytes;
 #else
 			ASSERT(iip->ili_aextents_buf == NULL);
@@ -473,7 +462,7 @@
 			ext_buffer = kmem_alloc(ip->i_afp->if_bytes,
 				KM_SLEEP);
 			iip->ili_aextents_buf = ext_buffer;
-			vecp->i_addr = (xfs_caddr_t)ext_buffer;
+			vecp->i_addr = ext_buffer;
 			vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
 					XFS_ATTR_FORK);
 #endif
@@ -490,7 +479,7 @@
 		if (iip->ili_format.ilf_fields & XFS_ILOG_ABROOT) {
 			ASSERT(ip->i_afp->if_broot_bytes > 0);
 			ASSERT(ip->i_afp->if_broot != NULL);
-			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_broot;
+			vecp->i_addr = ip->i_afp->if_broot;
 			vecp->i_len = ip->i_afp->if_broot_bytes;
 			vecp->i_type = XLOG_REG_TYPE_IATTR_BROOT;
 			vecp++;
@@ -506,7 +495,7 @@
 			ASSERT(ip->i_afp->if_bytes > 0);
 			ASSERT(ip->i_afp->if_u1.if_data != NULL);
 
-			vecp->i_addr = (xfs_caddr_t)ip->i_afp->if_u1.if_data;
+			vecp->i_addr = ip->i_afp->if_u1.if_data;
 			/*
 			 * Round i_bytes up to a word boundary.
 			 * The underlying memory is guaranteed to
@@ -528,7 +517,7 @@
 		break;
 	}
 
-	ASSERT(nvecs == iip->ili_item.li_desc->lid_size);
+	ASSERT(nvecs == lip->li_desc->lid_size);
 	iip->ili_format.ilf_size = nvecs;
 }
 
@@ -539,12 +528,14 @@
  */
 STATIC void
 xfs_inode_item_pin(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	ASSERT(xfs_isilocked(iip->ili_inode, XFS_ILOCK_EXCL));
+	struct xfs_inode	*ip = INODE_ITEM(lip)->ili_inode;
 
-	trace_xfs_inode_pin(iip->ili_inode, _RET_IP_);
-	atomic_inc(&iip->ili_inode->i_pincount);
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
+
+	trace_xfs_inode_pin(ip, _RET_IP_);
+	atomic_inc(&ip->i_pincount);
 }
 
 
@@ -554,12 +545,12 @@
  *
  * Also wake up anyone in xfs_iunpin_wait() if the count goes to 0.
  */
-/* ARGSUSED */
 STATIC void
 xfs_inode_item_unpin(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip,
+	int			remove)
 {
-	struct xfs_inode	*ip = iip->ili_inode;
+	struct xfs_inode	*ip = INODE_ITEM(lip)->ili_inode;
 
 	trace_xfs_inode_unpin(ip, _RET_IP_);
 	ASSERT(atomic_read(&ip->i_pincount) > 0);
@@ -567,15 +558,6 @@
 		wake_up(&ip->i_ipin_wait);
 }
 
-/* ARGSUSED */
-STATIC void
-xfs_inode_item_unpin_remove(
-	xfs_inode_log_item_t	*iip,
-	xfs_trans_t		*tp)
-{
-	xfs_inode_item_unpin(iip);
-}
-
 /*
  * This is called to attempt to lock the inode associated with this
  * inode log item, in preparation for the push routine which does the actual
@@ -591,19 +573,16 @@
  */
 STATIC uint
 xfs_inode_item_trylock(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	register xfs_inode_t	*ip;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 
-	ip = iip->ili_inode;
-
-	if (xfs_ipincount(ip) > 0) {
+	if (xfs_ipincount(ip) > 0)
 		return XFS_ITEM_PINNED;
-	}
 
-	if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED)) {
+	if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED))
 		return XFS_ITEM_LOCKED;
-	}
 
 	if (!xfs_iflock_nowait(ip)) {
 		/*
@@ -629,7 +608,7 @@
 	if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
 		ASSERT(iip->ili_format.ilf_fields != 0);
 		ASSERT(iip->ili_logged == 0);
-		ASSERT(iip->ili_item.li_flags & XFS_LI_IN_AIL);
+		ASSERT(lip->li_flags & XFS_LI_IN_AIL);
 	}
 #endif
 	return XFS_ITEM_SUCCESS;
@@ -643,26 +622,18 @@
  */
 STATIC void
 xfs_inode_item_unlock(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	uint		hold;
-	uint		iolocked;
-	uint		lock_flags;
-	xfs_inode_t	*ip;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	unsigned short		lock_flags;
 
-	ASSERT(iip != NULL);
 	ASSERT(iip->ili_inode->i_itemp != NULL);
 	ASSERT(xfs_isilocked(iip->ili_inode, XFS_ILOCK_EXCL));
-	ASSERT((!(iip->ili_inode->i_itemp->ili_flags &
-		  XFS_ILI_IOLOCKED_EXCL)) ||
-	       xfs_isilocked(iip->ili_inode, XFS_IOLOCK_EXCL));
-	ASSERT((!(iip->ili_inode->i_itemp->ili_flags &
-		  XFS_ILI_IOLOCKED_SHARED)) ||
-	       xfs_isilocked(iip->ili_inode, XFS_IOLOCK_SHARED));
+
 	/*
 	 * Clear the transaction pointer in the inode.
 	 */
-	ip = iip->ili_inode;
 	ip->i_transp = NULL;
 
 	/*
@@ -686,34 +657,11 @@
 		iip->ili_aextents_buf = NULL;
 	}
 
-	/*
-	 * Figure out if we should unlock the inode or not.
-	 */
-	hold = iip->ili_flags & XFS_ILI_HOLD;
-
-	/*
-	 * Before clearing out the flags, remember whether we
-	 * are holding the inode's IO lock.
-	 */
-	iolocked = iip->ili_flags & XFS_ILI_IOLOCKED_ANY;
-
-	/*
-	 * Clear out the fields of the inode log item particular
-	 * to the current transaction.
-	 */
-	iip->ili_flags = 0;
-
-	/*
-	 * Unlock the inode if XFS_ILI_HOLD was not set.
-	 */
-	if (!hold) {
-		lock_flags = XFS_ILOCK_EXCL;
-		if (iolocked & XFS_ILI_IOLOCKED_EXCL) {
-			lock_flags |= XFS_IOLOCK_EXCL;
-		} else if (iolocked & XFS_ILI_IOLOCKED_SHARED) {
-			lock_flags |= XFS_IOLOCK_SHARED;
-		}
-		xfs_iput(iip->ili_inode, lock_flags);
+	lock_flags = iip->ili_lock_flags;
+	iip->ili_lock_flags = 0;
+	if (lock_flags) {
+		xfs_iunlock(iip->ili_inode, lock_flags);
+		IRELE(iip->ili_inode);
 	}
 }
 
@@ -725,13 +673,12 @@
  * is the only one that matters.  Therefore, simply return the
  * given lsn.
  */
-/*ARGSUSED*/
 STATIC xfs_lsn_t
 xfs_inode_item_committed(
-	xfs_inode_log_item_t	*iip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	return (lsn);
+	return lsn;
 }
 
 /*
@@ -743,13 +690,12 @@
  */
 STATIC void
 xfs_inode_item_pushbuf(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	xfs_inode_t	*ip;
-	xfs_mount_t	*mp;
-	xfs_buf_t	*bp;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+	struct xfs_buf		*bp;
 
-	ip = iip->ili_inode;
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
 
 	/*
@@ -757,14 +703,13 @@
 	 * inode was taken off the AIL. So, just get out.
 	 */
 	if (completion_done(&ip->i_flush) ||
-	    ((iip->ili_item.li_flags & XFS_LI_IN_AIL) == 0)) {
+	    !(lip->li_flags & XFS_LI_IN_AIL)) {
 		xfs_iunlock(ip, XFS_ILOCK_SHARED);
 		return;
 	}
 
-	mp = ip->i_mount;
-	bp = xfs_incore(mp->m_ddev_targp, iip->ili_format.ilf_blkno,
-		    iip->ili_format.ilf_len, XBF_TRYLOCK);
+	bp = xfs_incore(ip->i_mount->m_ddev_targp, iip->ili_format.ilf_blkno,
+			iip->ili_format.ilf_len, XBF_TRYLOCK);
 
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 	if (!bp)
@@ -772,10 +717,8 @@
 	if (XFS_BUF_ISDELAYWRITE(bp))
 		xfs_buf_delwri_promote(bp);
 	xfs_buf_relse(bp);
-	return;
 }
 
-
 /*
  * This is called to asynchronously write the inode associated with this
  * inode log item out to disk. The inode will already have been locked by
@@ -783,14 +726,14 @@
  */
 STATIC void
 xfs_inode_item_push(
-	xfs_inode_log_item_t	*iip)
+	struct xfs_log_item	*lip)
 {
-	xfs_inode_t	*ip;
-
-	ip = iip->ili_inode;
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED));
 	ASSERT(!completion_done(&ip->i_flush));
+
 	/*
 	 * Since we were able to lock the inode's flush lock and
 	 * we found it on the AIL, the inode must be dirty.  This
@@ -813,43 +756,34 @@
 	 */
 	(void) xfs_iflush(ip, 0);
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	return;
 }
 
 /*
  * XXX rcc - this one really has to do something.  Probably needs
  * to stamp in a new field in the incore inode.
  */
-/* ARGSUSED */
 STATIC void
 xfs_inode_item_committing(
-	xfs_inode_log_item_t	*iip,
+	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
-	iip->ili_last_lsn = lsn;
-	return;
+	INODE_ITEM(lip)->ili_last_lsn = lsn;
 }
 
 /*
  * This is the ops vector shared by all buf log items.
  */
 static struct xfs_item_ops xfs_inode_item_ops = {
-	.iop_size	= (uint(*)(xfs_log_item_t*))xfs_inode_item_size,
-	.iop_format	= (void(*)(xfs_log_item_t*, xfs_log_iovec_t*))
-					xfs_inode_item_format,
-	.iop_pin	= (void(*)(xfs_log_item_t*))xfs_inode_item_pin,
-	.iop_unpin	= (void(*)(xfs_log_item_t*))xfs_inode_item_unpin,
-	.iop_unpin_remove = (void(*)(xfs_log_item_t*, xfs_trans_t*))
-					xfs_inode_item_unpin_remove,
-	.iop_trylock	= (uint(*)(xfs_log_item_t*))xfs_inode_item_trylock,
-	.iop_unlock	= (void(*)(xfs_log_item_t*))xfs_inode_item_unlock,
-	.iop_committed	= (xfs_lsn_t(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_inode_item_committed,
-	.iop_push	= (void(*)(xfs_log_item_t*))xfs_inode_item_push,
-	.iop_pushbuf	= (void(*)(xfs_log_item_t*))xfs_inode_item_pushbuf,
-	.iop_committing = (void(*)(xfs_log_item_t*, xfs_lsn_t))
-					xfs_inode_item_committing
+	.iop_size	= xfs_inode_item_size,
+	.iop_format	= xfs_inode_item_format,
+	.iop_pin	= xfs_inode_item_pin,
+	.iop_unpin	= xfs_inode_item_unpin,
+	.iop_trylock	= xfs_inode_item_trylock,
+	.iop_unlock	= xfs_inode_item_unlock,
+	.iop_committed	= xfs_inode_item_committed,
+	.iop_push	= xfs_inode_item_push,
+	.iop_pushbuf	= xfs_inode_item_pushbuf,
+	.iop_committing = xfs_inode_item_committing
 };
 
 
@@ -858,10 +792,10 @@
  */
 void
 xfs_inode_item_init(
-	xfs_inode_t	*ip,
-	xfs_mount_t	*mp)
+	struct xfs_inode	*ip,
+	struct xfs_mount	*mp)
 {
-	xfs_inode_log_item_t	*iip;
+	struct xfs_inode_log_item *iip;
 
 	ASSERT(ip->i_itemp == NULL);
 	iip = ip->i_itemp = kmem_zone_zalloc(xfs_ili_zone, KM_SLEEP);
@@ -899,14 +833,14 @@
  * from the AIL if it has not been re-logged, and unlocking the inode's
  * flush lock.
  */
-/*ARGSUSED*/
 void
 xfs_iflush_done(
-	xfs_buf_t		*bp,
-	xfs_inode_log_item_t	*iip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
 	xfs_inode_t		*ip = iip->ili_inode;
-	struct xfs_ail		*ailp = iip->ili_item.li_ailp;
+	struct xfs_ail		*ailp = lip->li_ailp;
 
 	/*
 	 * We only want to pull the item from the AIL if it is
@@ -917,12 +851,11 @@
 	 * the lock since it's cheaper, and then we recheck while
 	 * holding the lock before removing the inode from the AIL.
 	 */
-	if (iip->ili_logged &&
-	    (iip->ili_item.li_lsn == iip->ili_flush_lsn)) {
+	if (iip->ili_logged && lip->li_lsn == iip->ili_flush_lsn) {
 		spin_lock(&ailp->xa_lock);
-		if (iip->ili_item.li_lsn == iip->ili_flush_lsn) {
+		if (lip->li_lsn == iip->ili_flush_lsn) {
 			/* xfs_trans_ail_delete() drops the AIL lock. */
-			xfs_trans_ail_delete(ailp, (xfs_log_item_t*)iip);
+			xfs_trans_ail_delete(ailp, lip);
 		} else {
 			spin_unlock(&ailp->xa_lock);
 		}
@@ -940,8 +873,6 @@
 	 * Release the inode's flush lock since we're done with it.
 	 */
 	xfs_ifunlock(ip);
-
-	return;
 }
 
 /*
@@ -957,10 +888,8 @@
 	xfs_inode_t		*ip)
 {
 	xfs_inode_log_item_t	*iip = ip->i_itemp;
-	xfs_mount_t		*mp;
 
 	iip = ip->i_itemp;
-	mp = ip->i_mount;
 	if (iip) {
 		struct xfs_ail	*ailp = iip->ili_item.li_ailp;
 		if (iip->ili_item.li_flags & XFS_LI_IN_AIL) {
@@ -991,10 +920,10 @@
 
 void
 xfs_istale_done(
-	xfs_buf_t		*bp,
-	xfs_inode_log_item_t	*iip)
+	struct xfs_buf		*bp,
+	struct xfs_log_item	*lip)
 {
-	xfs_iflush_abort(iip->ili_inode);
+	xfs_iflush_abort(INODE_ITEM(lip)->ili_inode);
 }
 
 /*
@@ -1007,9 +936,8 @@
 	xfs_inode_log_format_t	*in_f)
 {
 	if (buf->i_len == sizeof(xfs_inode_log_format_32_t)) {
-		xfs_inode_log_format_32_t *in_f32;
+		xfs_inode_log_format_32_t *in_f32 = buf->i_addr;
 
-		in_f32 = (xfs_inode_log_format_32_t *)buf->i_addr;
 		in_f->ilf_type = in_f32->ilf_type;
 		in_f->ilf_size = in_f32->ilf_size;
 		in_f->ilf_fields = in_f32->ilf_fields;
@@ -1025,9 +953,8 @@
 		in_f->ilf_boffset = in_f32->ilf_boffset;
 		return 0;
 	} else if (buf->i_len == sizeof(xfs_inode_log_format_64_t)){
-		xfs_inode_log_format_64_t *in_f64;
+		xfs_inode_log_format_64_t *in_f64 = buf->i_addr;
 
-		in_f64 = (xfs_inode_log_format_64_t *)buf->i_addr;
 		in_f->ilf_type = in_f64->ilf_type;
 		in_f->ilf_size = in_f64->ilf_size;
 		in_f->ilf_fields = in_f64->ilf_fields;
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index 9a46795..d3dee61e 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -103,12 +103,6 @@
 				 XFS_ILOG_ADATA | XFS_ILOG_AEXT | \
 				 XFS_ILOG_ABROOT)
 
-#define	XFS_ILI_HOLD		0x1
-#define	XFS_ILI_IOLOCKED_EXCL	0x2
-#define	XFS_ILI_IOLOCKED_SHARED	0x4
-
-#define	XFS_ILI_IOLOCKED_ANY   (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
-
 static inline int xfs_ilog_fbroot(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
@@ -137,7 +131,7 @@
 	struct xfs_inode	*ili_inode;	   /* inode ptr */
 	xfs_lsn_t		ili_flush_lsn;	   /* lsn at last flush */
 	xfs_lsn_t		ili_last_lsn;	   /* lsn at last transaction */
-	unsigned short		ili_flags;	   /* misc flags */
+	unsigned short		ili_lock_flags;	   /* lock flags */
 	unsigned short		ili_logged;	   /* flushed logged data */
 	unsigned int		ili_last_fields;   /* fields when flushed */
 	struct xfs_bmbt_rec	*ili_extents_buf;  /* array of logged
@@ -161,8 +155,8 @@
 
 extern void xfs_inode_item_init(struct xfs_inode *, struct xfs_mount *);
 extern void xfs_inode_item_destroy(struct xfs_inode *);
-extern void xfs_iflush_done(struct xfs_buf *, xfs_inode_log_item_t *);
-extern void xfs_istale_done(struct xfs_buf *, xfs_inode_log_item_t *);
+extern void xfs_iflush_done(struct xfs_buf *, struct xfs_log_item *);
+extern void xfs_istale_done(struct xfs_buf *, struct xfs_log_item *);
 extern void xfs_iflush_abort(struct xfs_inode *);
 extern int xfs_inode_item_format_convert(xfs_log_iovec_t *,
 					 xfs_inode_log_format_t *);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index ef14943..2057614 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -23,19 +23,14 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
 #include "xfs_alloc.h"
-#include "xfs_dmapi.h"
 #include "xfs_quota.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_ialloc.h"
 #include "xfs_btree.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
@@ -123,7 +118,7 @@
 	error = xfs_bmapi(NULL, ip, offset_fsb,
 			(xfs_filblks_t)(end_fsb - offset_fsb),
 			bmapi_flags,  NULL, 0, imap,
-			nimaps, NULL, NULL);
+			nimaps, NULL);
 
 	if (error)
 		goto out;
@@ -138,7 +133,7 @@
 			break;
 		}
 
-		if (flags & (BMAPI_DIRECT|BMAPI_MMAP)) {
+		if (flags & BMAPI_DIRECT) {
 			error = xfs_iomap_write_direct(ip, offset, count, flags,
 						       imap, nimaps);
 		} else {
@@ -247,7 +242,7 @@
 	xfs_off_t	offset,
 	size_t		count,
 	int		flags,
-	xfs_bmbt_irec_t *ret_imap,
+	xfs_bmbt_irec_t *imap,
 	int		*nmaps)
 {
 	xfs_mount_t	*mp = ip->i_mount;
@@ -261,7 +256,6 @@
 	int		quota_flag;
 	int		rt;
 	xfs_trans_t	*tp;
-	xfs_bmbt_irec_t imap;
 	xfs_bmap_free_t free_list;
 	uint		qblocks, resblks, resrtextents;
 	int		committed;
@@ -285,10 +279,10 @@
 		if (error)
 			goto error_out;
 	} else {
-		if (*nmaps && (ret_imap->br_startblock == HOLESTARTBLOCK))
+		if (*nmaps && (imap->br_startblock == HOLESTARTBLOCK))
 			last_fsb = MIN(last_fsb, (xfs_fileoff_t)
-					ret_imap->br_blockcount +
-					ret_imap->br_startoff);
+					imap->br_blockcount +
+					imap->br_startoff);
 	}
 	count_fsb = last_fsb - offset_fsb;
 	ASSERT(count_fsb > 0);
@@ -334,20 +328,22 @@
 	if (error)
 		goto error1;
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	bmapi_flag = XFS_BMAPI_WRITE;
 	if ((flags & BMAPI_DIRECT) && (offset < ip->i_size || extsz))
 		bmapi_flag |= XFS_BMAPI_PREALLOC;
 
 	/*
-	 * Issue the xfs_bmapi() call to allocate the blocks
+	 * Issue the xfs_bmapi() call to allocate the blocks.
+	 *
+	 * From this point onwards we overwrite the imap pointer that the
+	 * caller gave to us.
 	 */
 	xfs_bmap_init(&free_list, &firstfsb);
 	nimaps = 1;
 	error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
-		&firstfsb, 0, &imap, &nimaps, &free_list, NULL);
+		&firstfsb, 0, imap, &nimaps, &free_list);
 	if (error)
 		goto error0;
 
@@ -369,12 +365,11 @@
 		goto error_out;
 	}
 
-	if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip))) {
-		error = xfs_cmn_err_fsblock_zero(ip, &imap);
+	if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip))) {
+		error = xfs_cmn_err_fsblock_zero(ip, imap);
 		goto error_out;
 	}
 
-	*ret_imap = imap;
 	*nmaps = 1;
 	return 0;
 
@@ -425,7 +420,7 @@
 		imaps = nimaps;
 		firstblock = NULLFSBLOCK;
 		error = xfs_bmapi(NULL, ip, start_fsb, count_fsb, 0,
-				  &firstblock, 0, imap, &imaps, NULL, NULL);
+				  &firstblock, 0, imap, &imaps, NULL);
 		if (error)
 			return error;
 		for (n = 0; n < imaps; n++) {
@@ -500,7 +495,7 @@
 			  (xfs_filblks_t)(last_fsb - offset_fsb),
 			  XFS_BMAPI_DELAY | XFS_BMAPI_WRITE |
 			  XFS_BMAPI_ENTIRE, &firstblock, 1, imap,
-			  &nimaps, NULL, NULL);
+			  &nimaps, NULL);
 	if (error && (error != ENOSPC))
 		return XFS_ERROR(error);
 
@@ -548,7 +543,7 @@
 	xfs_inode_t	*ip,
 	xfs_off_t	offset,
 	size_t		count,
-	xfs_bmbt_irec_t *map,
+	xfs_bmbt_irec_t *imap,
 	int		*retmap)
 {
 	xfs_mount_t	*mp = ip->i_mount;
@@ -557,7 +552,6 @@
 	xfs_fsblock_t	first_block;
 	xfs_bmap_free_t	free_list;
 	xfs_filblks_t	count_fsb;
-	xfs_bmbt_irec_t	imap;
 	xfs_trans_t	*tp;
 	int		nimaps, committed;
 	int		error = 0;
@@ -573,8 +567,8 @@
 		return XFS_ERROR(error);
 
 	offset_fsb = XFS_B_TO_FSBT(mp, offset);
-	count_fsb = map->br_blockcount;
-	map_start_fsb = map->br_startoff;
+	count_fsb = imap->br_blockcount;
+	map_start_fsb = imap->br_startoff;
 
 	XFS_STATS_ADD(xs_xstrat_bytes, XFS_FSB_TO_B(mp, count_fsb));
 
@@ -602,8 +596,7 @@
 				return XFS_ERROR(error);
 			}
 			xfs_ilock(ip, XFS_ILOCK_EXCL);
-			xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(tp, ip);
+			xfs_trans_ijoin(tp, ip);
 
 			xfs_bmap_init(&free_list, &first_block);
 
@@ -654,10 +647,15 @@
 				}
 			}
 
-			/* Go get the actual blocks */
+			/*
+			 * Go get the actual blocks.
+	 	 	 *
+			 * From this point onwards we overwrite the imap
+			 * pointer that the caller gave to us.
+			 */
 			error = xfs_bmapi(tp, ip, map_start_fsb, count_fsb,
 					XFS_BMAPI_WRITE, &first_block, 1,
-					&imap, &nimaps, &free_list, NULL);
+					imap, &nimaps, &free_list);
 			if (error)
 				goto trans_cancel;
 
@@ -676,13 +674,12 @@
 		 * See if we were able to allocate an extent that
 		 * covers at least part of the callers request
 		 */
-		if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip)))
-			return xfs_cmn_err_fsblock_zero(ip, &imap);
+		if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
+			return xfs_cmn_err_fsblock_zero(ip, imap);
 
-		if ((offset_fsb >= imap.br_startoff) &&
-		    (offset_fsb < (imap.br_startoff +
-				   imap.br_blockcount))) {
-			*map = imap;
+		if ((offset_fsb >= imap->br_startoff) &&
+		    (offset_fsb < (imap->br_startoff +
+				   imap->br_blockcount))) {
 			*retmap = 1;
 			XFS_STATS_INC(xs_xstrat_quick);
 			return 0;
@@ -692,8 +689,8 @@
 		 * So far we have not mapped the requested part of the
 		 * file, just surrounding data, try again.
 		 */
-		count_fsb -= imap.br_blockcount;
-		map_start_fsb = imap.br_startoff + imap.br_blockcount;
+		count_fsb -= imap->br_blockcount;
+		map_start_fsb = imap->br_startoff + imap->br_blockcount;
 	}
 
 trans_cancel:
@@ -766,8 +763,7 @@
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Modify the unwritten extent state of the buffer.
@@ -776,7 +772,7 @@
 		nimaps = 1;
 		error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
 				  XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
-				  1, &imap, &nimaps, &free_list, NULL);
+				  1, &imap, &nimaps, &free_list);
 		if (error)
 			goto error_on_bmapi_transaction;
 
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index 81ac4af..7748a43 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -18,17 +18,16 @@
 #ifndef __XFS_IOMAP_H__
 #define __XFS_IOMAP_H__
 
-typedef enum {
-	/* base extent manipulation calls */
-	BMAPI_READ = (1 << 0),		/* read extents */
-	BMAPI_WRITE = (1 << 1),		/* create extents */
-	BMAPI_ALLOCATE = (1 << 2),	/* delayed allocate to real extents */
-	/* modifiers */
-	BMAPI_IGNSTATE = (1 << 4),	/* ignore unwritten state on read */
-	BMAPI_DIRECT = (1 << 5),	/* direct instead of buffered write */
-	BMAPI_MMAP = (1 << 6),		/* allocate for mmap write */
-	BMAPI_TRYLOCK = (1 << 7),	/* non-blocking request */
-} bmapi_flags_t;
+/* base extent manipulation calls */
+#define BMAPI_READ	(1 << 0)	/* read extents */
+#define BMAPI_WRITE	(1 << 1)	/* create extents */
+#define BMAPI_ALLOCATE	(1 << 2)	/* delayed allocate to real extents */
+
+/* modifiers */
+#define BMAPI_IGNSTATE	(1 << 4)	/* ignore unwritten state on read */
+#define BMAPI_DIRECT	(1 << 5)	/* direct instead of buffered write */
+#define BMAPI_MMA	(1 << 6)	/* allocate for mmap write */
+#define BMAPI_TRYLOCK	(1 << 7)	/* non-blocking request */
 
 #define BMAPI_FLAGS \
 	{ BMAPI_READ,		"READ" }, \
@@ -36,7 +35,6 @@
 	{ BMAPI_ALLOCATE,	"ALLOCATE" }, \
 	{ BMAPI_IGNSTATE,	"IGNSTATE" }, \
 	{ BMAPI_DIRECT,		"DIRECT" }, \
-	{ BMAPI_MMAP,		"MMAP" }, \
 	{ BMAPI_TRYLOCK,	"TRYLOCK" }
 
 struct xfs_inode;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index b1b801e..7e3626e 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -24,20 +24,17 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_ialloc.h"
 #include "xfs_itable.h"
 #include "xfs_error.h"
 #include "xfs_btree.h"
+#include "xfs_trace.h"
 
 STATIC int
 xfs_internal_inum(
@@ -49,24 +46,40 @@
 		 (ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
 }
 
-STATIC int
-xfs_bulkstat_one_iget(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
-	xfs_bstat_t	*buf,		/* return buffer */
-	int		*stat)		/* BULKSTAT_RV_... */
+/*
+ * Return stat information for one inode.
+ * Return 0 if ok, else errno.
+ */
+int
+xfs_bulkstat_one_int(
+	struct xfs_mount	*mp,		/* mount point for filesystem */
+	xfs_ino_t		ino,		/* inode to get data for */
+	void __user		*buffer,	/* buffer to place output in */
+	int			ubsize,		/* size of buffer */
+	bulkstat_one_fmt_pf	formatter,	/* formatter, copy to user */
+	int			*ubused,	/* bytes used by me */
+	int			*stat)		/* BULKSTAT_RV_... */
 {
-	xfs_icdinode_t	*dic;	/* dinode core info pointer */
-	xfs_inode_t	*ip;		/* incore inode pointer */
-	struct inode	*inode;
-	int		error;
+	struct xfs_icdinode	*dic;		/* dinode core info pointer */
+	struct xfs_inode	*ip;		/* incore inode pointer */
+	struct inode		*inode;
+	struct xfs_bstat	*buf;		/* return buffer */
+	int			error = 0;	/* error value */
+
+	*stat = BULKSTAT_RV_NOTHING;
+
+	if (!buffer || xfs_internal_inum(mp, ino))
+		return XFS_ERROR(EINVAL);
+
+	buf = kmem_alloc(sizeof(*buf), KM_SLEEP | KM_MAYFAIL);
+	if (!buf)
+		return XFS_ERROR(ENOMEM);
 
 	error = xfs_iget(mp, NULL, ino,
-			 XFS_IGET_BULKSTAT, XFS_ILOCK_SHARED, &ip, bno);
+			 XFS_IGET_UNTRUSTED, XFS_ILOCK_SHARED, &ip);
 	if (error) {
 		*stat = BULKSTAT_RV_NOTHING;
-		return error;
+		goto out_free;
 	}
 
 	ASSERT(ip != NULL);
@@ -127,79 +140,19 @@
 		buf->bs_blocks = dic->di_nblocks + ip->i_delayed_blks;
 		break;
 	}
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	IRELE(ip);
 
-	xfs_iput(ip, XFS_ILOCK_SHARED);
+	error = formatter(buffer, ubsize, ubused, buf);
+
+	if (!error)
+		*stat = BULKSTAT_RV_DIDONE;
+
+ out_free:
+	kmem_free(buf);
 	return error;
 }
 
-STATIC void
-xfs_bulkstat_one_dinode(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	xfs_dinode_t	*dic,		/* dinode inode pointer */
-	xfs_bstat_t	*buf)		/* return buffer */
-{
-	/*
-	 * The inode format changed when we moved the link count and
-	 * made it 32 bits long.  If this is an old format inode,
-	 * convert it in memory to look like a new one.  If it gets
-	 * flushed to disk we will convert back before flushing or
-	 * logging it.  We zero out the new projid field and the old link
-	 * count field.  We'll handle clearing the pad field (the remains
-	 * of the old uuid field) when we actually convert the inode to
-	 * the new format. We don't change the version number so that we
-	 * can distinguish this from a real new format inode.
-	 */
-	if (dic->di_version == 1) {
-		buf->bs_nlink = be16_to_cpu(dic->di_onlink);
-		buf->bs_projid = 0;
-	} else {
-		buf->bs_nlink = be32_to_cpu(dic->di_nlink);
-		buf->bs_projid = be16_to_cpu(dic->di_projid);
-	}
-
-	buf->bs_ino = ino;
-	buf->bs_mode = be16_to_cpu(dic->di_mode);
-	buf->bs_uid = be32_to_cpu(dic->di_uid);
-	buf->bs_gid = be32_to_cpu(dic->di_gid);
-	buf->bs_size = be64_to_cpu(dic->di_size);
-	buf->bs_atime.tv_sec = be32_to_cpu(dic->di_atime.t_sec);
-	buf->bs_atime.tv_nsec = be32_to_cpu(dic->di_atime.t_nsec);
-	buf->bs_mtime.tv_sec = be32_to_cpu(dic->di_mtime.t_sec);
-	buf->bs_mtime.tv_nsec = be32_to_cpu(dic->di_mtime.t_nsec);
-	buf->bs_ctime.tv_sec = be32_to_cpu(dic->di_ctime.t_sec);
-	buf->bs_ctime.tv_nsec = be32_to_cpu(dic->di_ctime.t_nsec);
-	buf->bs_xflags = xfs_dic2xflags(dic);
-	buf->bs_extsize = be32_to_cpu(dic->di_extsize) << mp->m_sb.sb_blocklog;
-	buf->bs_extents = be32_to_cpu(dic->di_nextents);
-	buf->bs_gen = be32_to_cpu(dic->di_gen);
-	memset(buf->bs_pad, 0, sizeof(buf->bs_pad));
-	buf->bs_dmevmask = be32_to_cpu(dic->di_dmevmask);
-	buf->bs_dmstate = be16_to_cpu(dic->di_dmstate);
-	buf->bs_aextents = be16_to_cpu(dic->di_anextents);
-	buf->bs_forkoff = XFS_DFORK_BOFF(dic);
-
-	switch (dic->di_format) {
-	case XFS_DINODE_FMT_DEV:
-		buf->bs_rdev = xfs_dinode_get_rdev(dic);
-		buf->bs_blksize = BLKDEV_IOSIZE;
-		buf->bs_blocks = 0;
-		break;
-	case XFS_DINODE_FMT_LOCAL:
-	case XFS_DINODE_FMT_UUID:
-		buf->bs_rdev = 0;
-		buf->bs_blksize = mp->m_sb.sb_blocksize;
-		buf->bs_blocks = 0;
-		break;
-	case XFS_DINODE_FMT_EXTENTS:
-	case XFS_DINODE_FMT_BTREE:
-		buf->bs_rdev = 0;
-		buf->bs_blksize = mp->m_sb.sb_blocksize;
-		buf->bs_blocks = be64_to_cpu(dic->di_nblocks);
-		break;
-	}
-}
-
 /* Return 0 on success or positive error */
 STATIC int
 xfs_bulkstat_one_fmt(
@@ -217,118 +170,17 @@
 	return 0;
 }
 
-/*
- * Return stat information for one inode.
- * Return 0 if ok, else errno.
- */
-int		   	    		/* error status */
-xfs_bulkstat_one_int(
-	xfs_mount_t	*mp,		/* mount point for filesystem */
-	xfs_ino_t	ino,		/* inode number to get data for */
-	void		__user *buffer,	/* buffer to place output in */
-	int		ubsize,		/* size of buffer */
-	bulkstat_one_fmt_pf formatter,	/* formatter, copy to user */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
-	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
-	int		*stat)		/* BULKSTAT_RV_... */
-{
-	xfs_bstat_t	*buf;		/* return buffer */
-	int		error = 0;	/* error value */
-	xfs_dinode_t	*dip;		/* dinode inode pointer */
-
-	dip = (xfs_dinode_t *)dibuff;
-	*stat = BULKSTAT_RV_NOTHING;
-
-	if (!buffer || xfs_internal_inum(mp, ino))
-		return XFS_ERROR(EINVAL);
-
-	buf = kmem_alloc(sizeof(*buf), KM_SLEEP);
-
-	if (dip == NULL) {
-		/* We're not being passed a pointer to a dinode.  This happens
-		 * if BULKSTAT_FG_IGET is selected.  Do the iget.
-		 */
-		error = xfs_bulkstat_one_iget(mp, ino, bno, buf, stat);
-		if (error)
-			goto out_free;
-	} else {
-		xfs_bulkstat_one_dinode(mp, ino, dip, buf);
-	}
-
-	error = formatter(buffer, ubsize, ubused, buf);
-	if (error)
-		goto out_free;
-
-	*stat = BULKSTAT_RV_DIDONE;
-
- out_free:
-	kmem_free(buf);
-	return error;
-}
-
 int
 xfs_bulkstat_one(
 	xfs_mount_t	*mp,		/* mount point for filesystem */
 	xfs_ino_t	ino,		/* inode number to get data for */
 	void		__user *buffer,	/* buffer to place output in */
 	int		ubsize,		/* size of buffer */
-	void		*private_data,	/* my private data */
-	xfs_daddr_t	bno,		/* starting bno of inode cluster */
 	int		*ubused,	/* bytes used by me */
-	void		*dibuff,	/* on-disk inode buffer */
 	int		*stat)		/* BULKSTAT_RV_... */
 {
 	return xfs_bulkstat_one_int(mp, ino, buffer, ubsize,
-				    xfs_bulkstat_one_fmt, bno,
-				    ubused, dibuff, stat);
-}
-
-/*
- * Test to see whether we can use the ondisk inode directly, based
- * on the given bulkstat flags, filling in dipp accordingly.
- * Returns zero if the inode is dodgey.
- */
-STATIC int
-xfs_bulkstat_use_dinode(
-	xfs_mount_t	*mp,
-	int		flags,
-	xfs_buf_t	*bp,
-	int		clustidx,
-	xfs_dinode_t	**dipp)
-{
-	xfs_dinode_t	*dip;
-	unsigned int	aformat;
-
-	*dipp = NULL;
-	if (!bp || (flags & BULKSTAT_FG_IGET))
-		return 1;
-	dip = (xfs_dinode_t *)
-			xfs_buf_offset(bp, clustidx << mp->m_sb.sb_inodelog);
-	/*
-	 * Check the buffer containing the on-disk inode for di_mode == 0.
-	 * This is to prevent xfs_bulkstat from picking up just reclaimed
-	 * inodes that have their in-core state initialized but not flushed
-	 * to disk yet. This is a temporary hack that would require a proper
-	 * fix in the future.
-	 */
-	if (be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC ||
-	    !XFS_DINODE_GOOD_VERSION(dip->di_version) ||
-	    !dip->di_mode)
-		return 0;
-	if (flags & BULKSTAT_FG_QUICK) {
-		*dipp = dip;
-		return 1;
-	}
-	/* BULKSTAT_FG_INLINE: if attr fork is local, or not there, use it */
-	aformat = dip->di_aformat;
-	if ((XFS_DFORK_Q(dip) == 0) ||
-	    (aformat == XFS_DINODE_FMT_LOCAL) ||
-	    (aformat == XFS_DINODE_FMT_EXTENTS && !dip->di_anextents)) {
-		*dipp = dip;
-		return 1;
-	}
-	return 1;
+				    xfs_bulkstat_one_fmt, ubused, stat);
 }
 
 #define XFS_BULKSTAT_UBLEFT(ubleft)	((ubleft) >= statstruct_size)
@@ -342,10 +194,8 @@
 	xfs_ino_t		*lastinop, /* last inode returned */
 	int			*ubcountp, /* size of buffer/count returned */
 	bulkstat_one_pf		formatter, /* func that'd fill a single buf */
-	void			*private_data,/* private data for formatter */
 	size_t			statstruct_size, /* sizeof struct filling */
 	char			__user *ubuffer, /* buffer with inode stats */
-	int			flags,	/* defined in xfs_itable.h */
 	int			*done)	/* 1 if there are more stats to get */
 {
 	xfs_agblock_t		agbno=0;/* allocation group block number */
@@ -380,14 +230,12 @@
 	int			ubelem;	/* spaces used in user's buffer */
 	int			ubused;	/* bytes used by formatter */
 	xfs_buf_t		*bp;	/* ptr to on-disk inode cluster buf */
-	xfs_dinode_t		*dip;	/* ptr into bp for specific inode */
 
 	/*
 	 * Get the last inode value, see if there's nothing to do.
 	 */
 	ino = (xfs_ino_t)*lastinop;
 	lastino = ino;
-	dip = NULL;
 	agno = XFS_INO_TO_AGNO(mp, ino);
 	agino = XFS_INO_TO_AGINO(mp, ino);
 	if (agno >= mp->m_sb.sb_agcount ||
@@ -612,37 +460,6 @@
 							irbp->ir_startino) +
 						((chunkidx & nimask) >>
 						 mp->m_sb.sb_inopblog);
-
-					if (flags & (BULKSTAT_FG_QUICK |
-						     BULKSTAT_FG_INLINE)) {
-						int offset;
-
-						ino = XFS_AGINO_TO_INO(mp, agno,
-								       agino);
-						bno = XFS_AGB_TO_DADDR(mp, agno,
-								       agbno);
-
-						/*
-						 * Get the inode cluster buffer
-						 */
-						if (bp)
-							xfs_buf_relse(bp);
-
-						error = xfs_inotobp(mp, NULL, ino, &dip,
-								    &bp, &offset,
-								    XFS_IGET_BULKSTAT);
-
-						if (!error)
-							clustidx = offset / mp->m_sb.sb_inodesize;
-						if (XFS_TEST_ERROR(error != 0,
-								   mp, XFS_ERRTAG_BULKSTAT_READ_CHUNK,
-								   XFS_RANDOM_BULKSTAT_READ_CHUNK)) {
-							bp = NULL;
-							ubleft = 0;
-							rval = error;
-							break;
-						}
-					}
 				}
 				ino = XFS_AGINO_TO_INO(mp, agno, agino);
 				bno = XFS_AGB_TO_DADDR(mp, agno, agbno);
@@ -658,35 +475,13 @@
 				 * when the chunk is used up.
 				 */
 				irbp->ir_freecount++;
-				if (!xfs_bulkstat_use_dinode(mp, flags, bp,
-							     clustidx, &dip)) {
-					lastino = ino;
-					continue;
-				}
-				/*
-				 * If we need to do an iget, cannot hold bp.
-				 * Drop it, until starting the next cluster.
-				 */
-				if ((flags & BULKSTAT_FG_INLINE) && !dip) {
-					if (bp)
-						xfs_buf_relse(bp);
-					bp = NULL;
-				}
 
 				/*
 				 * Get the inode and fill in a single buffer.
-				 * BULKSTAT_FG_QUICK uses dip to fill it in.
-				 * BULKSTAT_FG_IGET uses igets.
-				 * BULKSTAT_FG_INLINE uses dip if we have an
-				 * inline attr fork, else igets.
-				 * See: xfs_bulkstat_one & xfs_dm_bulkstat_one.
-				 * This is also used to count inodes/blks, etc
-				 * in xfs_qm_quotacheck.
 				 */
 				ubused = statstruct_size;
-				error = formatter(mp, ino, ubufp,
-						ubleft, private_data,
-						bno, &ubused, dip, &fmterror);
+				error = formatter(mp, ino, ubufp, ubleft,
+						  &ubused, &fmterror);
 				if (fmterror == BULKSTAT_RV_NOTHING) {
 					if (error && error != ENOENT &&
 						error != EINVAL) {
@@ -778,8 +573,7 @@
 	 */
 
 	ino = (xfs_ino_t)*lastinop;
-	error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t),
-				 NULL, 0, NULL, NULL, &res);
+	error = xfs_bulkstat_one(mp, ino, buffer, sizeof(xfs_bstat_t), 0, &res);
 	if (error) {
 		/*
 		 * Special case way failed, do it the "long" way
@@ -788,8 +582,7 @@
 		(*lastinop)--;
 		count = 1;
 		if (xfs_bulkstat(mp, lastinop, &count, xfs_bulkstat_one,
-				NULL, sizeof(xfs_bstat_t), buffer,
-				BULKSTAT_FG_IGET, done))
+				sizeof(xfs_bstat_t), buffer, done))
 			return error;
 		if (count == 0 || (xfs_ino_t)*lastinop != ino)
 			return error == EFSCORRUPTED ?
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index 20792bf..97295d9 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -27,10 +27,7 @@
 			       xfs_ino_t	ino,
 			       void		__user *buffer,
 			       int		ubsize,
-			       void		*private_data,
-			       xfs_daddr_t	bno,
 			       int		*ubused,
-			       void		*dip,
 			       int		*stat);
 
 /*
@@ -41,13 +38,6 @@
 #define BULKSTAT_RV_GIVEUP	2
 
 /*
- * Values for bulkstat flag argument.
- */
-#define BULKSTAT_FG_IGET	0x1	/* Go through the buffer cache */
-#define BULKSTAT_FG_QUICK	0x2	/* No iget, walk the dinode cluster */
-#define BULKSTAT_FG_INLINE	0x4	/* No iget if inline attrs */
-
-/*
  * Return stat information in bulk (by-inode) for the filesystem.
  */
 int					/* error status */
@@ -56,10 +46,8 @@
 	xfs_ino_t	*lastino,	/* last inode returned */
 	int		*count,		/* size of buffer/count returned */
 	bulkstat_one_pf formatter,	/* func that'd fill a single buf */
-	void		*private_data,	/* private data for formatter */
 	size_t		statstruct_size,/* sizeof struct that we're filling */
 	char		__user *ubuffer,/* buffer with inode stats */
-	int		flags,		/* flag to control access method */
 	int		*done);		/* 1 if there are more stats to get */
 
 int
@@ -82,9 +70,7 @@
 	void			__user *buffer,
 	int			ubsize,
 	bulkstat_one_fmt_pf	formatter,
-	xfs_daddr_t		bno,
 	int			*ubused,
-	void			*dibuff,
 	int			*stat);
 
 int
@@ -93,10 +79,7 @@
 	xfs_ino_t		ino,
 	void			__user *buffer,
 	int			ubsize,
-	void			*private_data,
-	xfs_daddr_t		bno,
 	int			*ubused,
-	void			*dibuff,
 	int			*stat);
 
 typedef int (*inumbers_fmt_pf)(
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 5215abc..925d572 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -24,8 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_log_priv.h"
@@ -35,8 +33,6 @@
 #include "xfs_ialloc_btree.h"
 #include "xfs_log_recover.h"
 #include "xfs_trans_priv.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_rw.h"
@@ -337,7 +333,6 @@
 	int			retval = 0;
 
 	ASSERT(client == XFS_TRANSACTION || client == XFS_LOG);
-	ASSERT((flags & XFS_LOG_NOSLEEP) == 0);
 
 	if (XLOG_FORCED_SHUTDOWN(log))
 		return XFS_ERROR(EIO);
@@ -552,7 +547,7 @@
 				.magic = XLOG_UNMOUNT_TYPE,
 			};
 			struct xfs_log_iovec reg = {
-				.i_addr = (void *)&magic,
+				.i_addr = &magic,
 				.i_len = sizeof(magic),
 				.i_type = XLOG_REG_TYPE_UNMOUNT,
 			};
@@ -1047,7 +1042,6 @@
 	xlog_in_core_t		*iclog, *prev_iclog=NULL;
 	xfs_buf_t		*bp;
 	int			i;
-	int			iclogsize;
 	int			error = ENOMEM;
 	uint			log2_size = 0;
 
@@ -1127,7 +1121,6 @@
 	 * with different amounts of memory.  See the definition of
 	 * xlog_in_core_t in xfs_log_priv.h for details.
 	 */
-	iclogsize = log->l_iclog_size;
 	ASSERT(log->l_iclog_size >= 4096);
 	for (i=0; i < log->l_iclog_bufs; i++) {
 		*iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL);
@@ -1428,11 +1421,8 @@
 	XFS_BUF_BUSY(bp);
 	XFS_BUF_ASYNC(bp);
 	bp->b_flags |= XBF_LOG_BUFFER;
-	/*
-	 * Do an ordered write for the log block.
-	 * Its unnecessary to flush the first split block in the log wrap case.
-	 */
-	if (!split && (log->l_mp->m_flags & XFS_MOUNT_BARRIER))
+
+	if (log->l_mp->m_flags & XFS_MOUNT_BARRIER)
 		XFS_BUF_ORDERED(bp);
 
 	ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 04c78e6..916eb7d 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -55,14 +55,10 @@
 /*
  * Flags to xfs_log_reserve()
  *
- *	XFS_LOG_SLEEP:	 If space is not available, sleep (default)
- *	XFS_LOG_NOSLEEP: If space is not available, return error
  *	XFS_LOG_PERM_RESERV: Permanent reservation.  When writes are
  *		performed against this type of reservation, the reservation
  *		is not decreased.  Long running transactions should use this.
  */
-#define XFS_LOG_SLEEP		0x0
-#define XFS_LOG_NOSLEEP		0x1
 #define XFS_LOG_PERM_RESERV	0x2
 
 /*
@@ -104,7 +100,7 @@
 #define XLOG_REG_TYPE_MAX		19
 
 typedef struct xfs_log_iovec {
-	xfs_caddr_t	i_addr;		/* beginning address of region */
+	void		*i_addr;	/* beginning address of region */
 	int		i_len;		/* length in bytes of region */
 	uint		i_type;		/* type of region */
 } xfs_log_iovec_t;
@@ -201,9 +197,4 @@
 bool	xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);
 
 #endif
-
-
-extern int xlog_debug;		/* set to 1 to enable real log */
-
-
 #endif	/* __XFS_LOG_H__ */
diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index bb17cc0..31e4ea2 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -26,8 +26,6 @@
 #include "xfs_log_priv.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_alloc.h"
@@ -554,7 +552,7 @@
 	thdr.th_type = XFS_TRANS_CHECKPOINT;
 	thdr.th_tid = tic->t_tid;
 	thdr.th_num_items = num_iovecs;
-	lhdr.i_addr = (xfs_caddr_t)&thdr;
+	lhdr.i_addr = &thdr;
 	lhdr.i_len = sizeof(xfs_trans_header_t);
 	lhdr.i_type = XLOG_REG_TYPE_TRANSHDR;
 	tic->t_curr_res -= lhdr.i_len + sizeof(xlog_op_header_t);
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 14a69ae..6f3f5fa 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -24,15 +24,11 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -132,15 +128,10 @@
 	int		nbblks,
 	xfs_buf_t	*bp)
 {
-	xfs_daddr_t	offset;
-	xfs_caddr_t	ptr;
+	xfs_daddr_t	offset = blk_no & ((xfs_daddr_t)log->l_sectBBsize - 1);
 
-	offset = blk_no & ((xfs_daddr_t) log->l_sectBBsize - 1);
-	ptr = XFS_BUF_PTR(bp) + BBTOB(offset);
-
-	ASSERT(ptr + BBTOB(nbblks) <= XFS_BUF_PTR(bp) + XFS_BUF_SIZE(bp));
-
-	return ptr;
+	ASSERT(BBTOB(offset + nbblks) <= XFS_BUF_SIZE(bp));
+	return XFS_BUF_PTR(bp) + BBTOB(offset);
 }
 
 
@@ -1570,9 +1561,7 @@
 
 	list_splice_init(&trans->r_itemq, &sort_list);
 	list_for_each_entry_safe(item, n, &sort_list, ri_list) {
-		xfs_buf_log_format_t	*buf_f;
-
-		buf_f = (xfs_buf_log_format_t *)item->ri_buf[0].i_addr;
+		xfs_buf_log_format_t	*buf_f = item->ri_buf[0].i_addr;
 
 		switch (ITEM_TYPE(item)) {
 		case XFS_LI_BUF:
@@ -1897,9 +1886,8 @@
 		 * current di_next_unlinked field.  Extract its value
 		 * and copy it to the buffer copy.
 		 */
-		logged_nextp = (xfs_agino_t *)
-			       ((char *)(item->ri_buf[item_index].i_addr) +
-				(next_unlinked_offset - reg_buf_offset));
+		logged_nextp = item->ri_buf[item_index].i_addr +
+				next_unlinked_offset - reg_buf_offset;
 		if (unlikely(*logged_nextp == 0)) {
 			xfs_fs_cmn_err(CE_ALERT, mp,
 				"bad inode buffer log record (ptr = 0x%p, bp = 0x%p).  XFS trying to replay bad (0) inode di_next_unlinked field",
@@ -1978,8 +1966,7 @@
 					item->ri_buf[i].i_len, __func__);
 				goto next;
 			}
-			error = xfs_qm_dqcheck((xfs_disk_dquot_t *)
-					       item->ri_buf[i].i_addr,
+			error = xfs_qm_dqcheck(item->ri_buf[i].i_addr,
 					       -1, 0, XFS_QMOPT_DOWARN,
 					       "dquot_buf_recover");
 			if (error)
@@ -2192,7 +2179,7 @@
 	xlog_recover_item_t	*item,
 	int			pass)
 {
-	xfs_buf_log_format_t	*buf_f;
+	xfs_buf_log_format_t	*buf_f = item->ri_buf[0].i_addr;
 	xfs_mount_t		*mp;
 	xfs_buf_t		*bp;
 	int			error;
@@ -2202,8 +2189,6 @@
 	ushort			flags;
 	uint			buf_flags;
 
-	buf_f = (xfs_buf_log_format_t *)item->ri_buf[0].i_addr;
-
 	if (pass == XLOG_RECOVER_PASS1) {
 		/*
 		 * In this pass we're only looking for buf items
@@ -2324,10 +2309,9 @@
 	}
 
 	if (item->ri_buf[0].i_len == sizeof(xfs_inode_log_format_t)) {
-		in_f = (xfs_inode_log_format_t *)item->ri_buf[0].i_addr;
+		in_f = item->ri_buf[0].i_addr;
 	} else {
-		in_f = (xfs_inode_log_format_t *)kmem_alloc(
-			sizeof(xfs_inode_log_format_t), KM_SLEEP);
+		in_f = kmem_alloc(sizeof(xfs_inode_log_format_t), KM_SLEEP);
 		need_free = 1;
 		error = xfs_inode_item_format_convert(&item->ri_buf[0], in_f);
 		if (error)
@@ -2375,7 +2359,7 @@
 		error = EFSCORRUPTED;
 		goto error;
 	}
-	dicp = (xfs_icdinode_t *)(item->ri_buf[1].i_addr);
+	dicp = item->ri_buf[1].i_addr;
 	if (unlikely(dicp->di_magic != XFS_DINODE_MAGIC)) {
 		xfs_buf_relse(bp);
 		xfs_fs_cmn_err(CE_ALERT, mp,
@@ -2466,7 +2450,7 @@
 	}
 
 	/* The core is in in-core format */
-	xfs_dinode_to_disk(dip, (xfs_icdinode_t *)item->ri_buf[1].i_addr);
+	xfs_dinode_to_disk(dip, item->ri_buf[1].i_addr);
 
 	/* the rest is in on-disk format */
 	if (item->ri_buf[1].i_len > sizeof(struct xfs_icdinode)) {
@@ -2583,7 +2567,7 @@
 		return (0);
 	}
 
-	qoff_f = (xfs_qoff_logformat_t *)item->ri_buf[0].i_addr;
+	qoff_f = item->ri_buf[0].i_addr;
 	ASSERT(qoff_f);
 
 	/*
@@ -2627,9 +2611,8 @@
 	if (mp->m_qflags == 0)
 		return (0);
 
-	recddq = (xfs_disk_dquot_t *)item->ri_buf[1].i_addr;
-
-	if (item->ri_buf[1].i_addr == NULL) {
+	recddq = item->ri_buf[1].i_addr;
+	if (recddq == NULL) {
 		cmn_err(CE_ALERT,
 			"XFS: NULL dquot in %s.", __func__);
 		return XFS_ERROR(EIO);
@@ -2659,7 +2642,7 @@
 	 * The other possibility, of course, is that the quota subsystem was
 	 * removed since the last mount - ENOSYS.
 	 */
-	dq_f = (xfs_dq_logformat_t *)item->ri_buf[0].i_addr;
+	dq_f = item->ri_buf[0].i_addr;
 	ASSERT(dq_f);
 	if ((error = xfs_qm_dqcheck(recddq,
 			   dq_f->qlf_id,
@@ -2726,7 +2709,7 @@
 		return 0;
 	}
 
-	efi_formatp = (xfs_efi_log_format_t *)item->ri_buf[0].i_addr;
+	efi_formatp = item->ri_buf[0].i_addr;
 
 	mp = log->l_mp;
 	efip = xfs_efi_init(mp, efi_formatp->efi_nextents);
@@ -2772,7 +2755,7 @@
 		return;
 	}
 
-	efd_formatp = (xfs_efd_log_format_t *)item->ri_buf[0].i_addr;
+	efd_formatp = item->ri_buf[0].i_addr;
 	ASSERT((item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_32_t) +
 		((efd_formatp->efd_nextents - 1) * sizeof(xfs_extent_32_t)))) ||
 	       (item->ri_buf[0].i_len == (sizeof(xfs_efd_log_format_64_t) +
@@ -3203,7 +3186,7 @@
 	int				error;
 
 	ino = XFS_AGINO_TO_INO(mp, agno, agino);
-	error = xfs_iget(mp, NULL, ino, 0, 0, &ip, 0);
+	error = xfs_iget(mp, NULL, ino, 0, 0, &ip);
 	if (error)
 		goto fail;
 
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index d7bf38c..aeb9d72 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -25,13 +25,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -268,10 +265,10 @@
 
 #if XFS_BIG_BLKNOS     /* Limited by ULONG_MAX of page cache index */
 	if (nblocks >> (PAGE_CACHE_SHIFT - sbp->sb_blocklog) > ULONG_MAX)
-		return E2BIG;
+		return EFBIG;
 #else                  /* Limited by UINT_MAX of sectors */
 	if (nblocks << (sbp->sb_blocklog - BBSHIFT) > UINT_MAX)
-		return E2BIG;
+		return EFBIG;
 #endif
 	return 0;
 }
@@ -393,7 +390,7 @@
 	    xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) {
 		xfs_fs_mount_cmn_err(flags,
 			"file system too large to be mounted on this system.");
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 
 	if (unlikely(sbp->sb_inprogress)) {
@@ -413,17 +410,6 @@
 	return 0;
 }
 
-STATIC void
-xfs_initialize_perag_icache(
-	xfs_perag_t	*pag)
-{
-	if (!pag->pag_ici_init) {
-		rwlock_init(&pag->pag_ici_lock);
-		INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
-		pag->pag_ici_init = 1;
-	}
-}
-
 int
 xfs_initialize_perag(
 	xfs_mount_t	*mp,
@@ -436,13 +422,8 @@
 	xfs_agino_t	agino;
 	xfs_ino_t	ino;
 	xfs_sb_t	*sbp = &mp->m_sb;
-	xfs_ino_t	max_inum = XFS_MAXINUMBER_32;
 	int		error = -ENOMEM;
 
-	/* Check to see if the filesystem can overflow 32 bit inodes */
-	agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
-	ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
-
 	/*
 	 * Walk the current per-ag tree so we don't try to initialise AGs
 	 * that already exist (growfs case). Allocate and insert all the
@@ -456,11 +437,18 @@
 		}
 		if (!first_initialised)
 			first_initialised = index;
+
 		pag = kmem_zalloc(sizeof(*pag), KM_MAYFAIL);
 		if (!pag)
 			goto out_unwind;
+		pag->pag_agno = index;
+		pag->pag_mount = mp;
+		rwlock_init(&pag->pag_ici_lock);
+		INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
+
 		if (radix_tree_preload(GFP_NOFS))
 			goto out_unwind;
+
 		spin_lock(&mp->m_perag_lock);
 		if (radix_tree_insert(&mp->m_perag_tree, index, pag)) {
 			BUG();
@@ -469,25 +457,26 @@
 			error = -EEXIST;
 			goto out_unwind;
 		}
-		pag->pag_agno = index;
-		pag->pag_mount = mp;
 		spin_unlock(&mp->m_perag_lock);
 		radix_tree_preload_end();
 	}
 
-	/* Clear the mount flag if no inode can overflow 32 bits
-	 * on this filesystem, or if specifically requested..
+	/*
+	 * If we mount with the inode64 option, or no inode overflows
+	 * the legacy 32-bit address space clear the inode32 option.
 	 */
-	if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > max_inum) {
-		mp->m_flags |= XFS_MOUNT_32BITINODES;
-	} else {
-		mp->m_flags &= ~XFS_MOUNT_32BITINODES;
-	}
+	agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
+	ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
 
-	/* If we can overflow then setup the ag headers accordingly */
+	if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > XFS_MAXINUMBER_32)
+		mp->m_flags |= XFS_MOUNT_32BITINODES;
+	else
+		mp->m_flags &= ~XFS_MOUNT_32BITINODES;
+
 	if (mp->m_flags & XFS_MOUNT_32BITINODES) {
-		/* Calculate how much should be reserved for inodes to
-		 * meet the max inode percentage.
+		/*
+		 * Calculate how much should be reserved for inodes to meet
+		 * the max inode percentage.
 		 */
 		if (mp->m_maxicount) {
 			__uint64_t	icount;
@@ -500,30 +489,28 @@
 		} else {
 			max_metadata = agcount;
 		}
+
 		for (index = 0; index < agcount; index++) {
 			ino = XFS_AGINO_TO_INO(mp, index, agino);
-			if (ino > max_inum) {
+			if (ino > XFS_MAXINUMBER_32) {
 				index++;
 				break;
 			}
 
-			/* This ag is preferred for inodes */
 			pag = xfs_perag_get(mp, index);
 			pag->pagi_inodeok = 1;
 			if (index < max_metadata)
 				pag->pagf_metadata = 1;
-			xfs_initialize_perag_icache(pag);
 			xfs_perag_put(pag);
 		}
 	} else {
-		/* Setup default behavior for smaller filesystems */
 		for (index = 0; index < agcount; index++) {
 			pag = xfs_perag_get(mp, index);
 			pag->pagi_inodeok = 1;
-			xfs_initialize_perag_icache(pag);
 			xfs_perag_put(pag);
 		}
 	}
+
 	if (maxagi)
 		*maxagi = index;
 	return 0;
@@ -1009,7 +996,7 @@
 	d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
 	if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
 		cmn_err(CE_WARN, "XFS: size check 1 failed");
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 	error = xfs_read_buf(mp, mp->m_ddev_targp,
 			     d - XFS_FSS_TO_BB(mp, 1),
@@ -1019,7 +1006,7 @@
 	} else {
 		cmn_err(CE_WARN, "XFS: size check 2 failed");
 		if (error == ENOSPC)
-			error = XFS_ERROR(E2BIG);
+			error = XFS_ERROR(EFBIG);
 		return error;
 	}
 
@@ -1027,7 +1014,7 @@
 		d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
 		if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
-			return XFS_ERROR(E2BIG);
+			return XFS_ERROR(EFBIG);
 		}
 		error = xfs_read_buf(mp, mp->m_logdev_targp,
 				     d - XFS_FSB_TO_BB(mp, 1),
@@ -1037,7 +1024,7 @@
 		} else {
 			cmn_err(CE_WARN, "XFS: size check 3 failed");
 			if (error == ENOSPC)
-				error = XFS_ERROR(E2BIG);
+				error = XFS_ERROR(EFBIG);
 			return error;
 		}
 	}
@@ -1254,7 +1241,7 @@
 	 * Allocate and initialize the per-ag data.
 	 */
 	spin_lock_init(&mp->m_perag_lock);
-	INIT_RADIX_TREE(&mp->m_perag_tree, GFP_NOFS);
+	INIT_RADIX_TREE(&mp->m_perag_tree, GFP_ATOMIC);
 	error = xfs_initialize_perag(mp, sbp->sb_agcount, &mp->m_maxagi);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: Failed per-ag init: %d", error);
@@ -1310,7 +1297,7 @@
 	 * Get and sanity-check the root inode.
 	 * Save the pointer to it in the mount structure.
 	 */
-	error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip);
 	if (error) {
 		cmn_err(CE_WARN, "XFS: failed to read root inode");
 		goto out_log_dealloc;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d2c7eed..622da21 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -66,65 +66,6 @@
 struct xfs_ail;
 struct xfs_quotainfo;
 
-
-/*
- * Prototypes and functions for the Data Migration subsystem.
- */
-
-typedef int	(*xfs_send_data_t)(int, struct xfs_inode *,
-			xfs_off_t, size_t, int, int *);
-typedef int	(*xfs_send_mmap_t)(struct vm_area_struct *, uint);
-typedef int	(*xfs_send_destroy_t)(struct xfs_inode *, dm_right_t);
-typedef int	(*xfs_send_namesp_t)(dm_eventtype_t, struct xfs_mount *,
-			struct xfs_inode *, dm_right_t,
-			struct xfs_inode *, dm_right_t,
-			const unsigned char *, const unsigned char *,
-			mode_t, int, int);
-typedef int	(*xfs_send_mount_t)(struct xfs_mount *, dm_right_t,
-			char *, char *);
-typedef void	(*xfs_send_unmount_t)(struct xfs_mount *, struct xfs_inode *,
-			dm_right_t, mode_t, int, int);
-
-typedef struct xfs_dmops {
-	xfs_send_data_t		xfs_send_data;
-	xfs_send_mmap_t		xfs_send_mmap;
-	xfs_send_destroy_t	xfs_send_destroy;
-	xfs_send_namesp_t	xfs_send_namesp;
-	xfs_send_mount_t	xfs_send_mount;
-	xfs_send_unmount_t	xfs_send_unmount;
-} xfs_dmops_t;
-
-#define XFS_DMAPI_UNMOUNT_FLAGS(mp) \
-	(((mp)->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ? 0 : DM_FLAGS_UNWANTED)
-
-#define XFS_SEND_DATA(mp, ev,ip,off,len,fl,lock) \
-	(*(mp)->m_dm_ops->xfs_send_data)(ev,ip,off,len,fl,lock)
-#define XFS_SEND_MMAP(mp, vma,fl) \
-	(*(mp)->m_dm_ops->xfs_send_mmap)(vma,fl)
-#define XFS_SEND_DESTROY(mp, ip,right) \
-	(*(mp)->m_dm_ops->xfs_send_destroy)(ip,right)
-#define XFS_SEND_NAMESP(mp, ev,b1,r1,b2,r2,n1,n2,mode,rval,fl) \
-	(*(mp)->m_dm_ops->xfs_send_namesp)(ev,NULL,b1,r1,b2,r2,n1,n2,mode,rval,fl)
-#define XFS_SEND_MOUNT(mp,right,path,name) \
-	(*(mp)->m_dm_ops->xfs_send_mount)(mp,right,path,name)
-#define XFS_SEND_PREUNMOUNT(mp) \
-do { \
-	if (mp->m_flags & XFS_MOUNT_DMAPI) { \
-		(*(mp)->m_dm_ops->xfs_send_namesp)(DM_EVENT_PREUNMOUNT, mp, \
-			(mp)->m_rootip, DM_RIGHT_NULL, \
-			(mp)->m_rootip, DM_RIGHT_NULL, \
-			NULL, NULL, 0, 0, XFS_DMAPI_UNMOUNT_FLAGS(mp)); \
-	} \
-} while (0)
-#define XFS_SEND_UNMOUNT(mp) \
-do { \
-	if (mp->m_flags & XFS_MOUNT_DMAPI) { \
-		(*(mp)->m_dm_ops->xfs_send_unmount)(mp, (mp)->m_rootip, \
-			DM_RIGHT_NULL, 0, 0, XFS_DMAPI_UNMOUNT_FLAGS(mp)); \
-	} \
-} while (0)
-
-
 #ifdef HAVE_PERCPU_SB
 
 /*
@@ -241,8 +182,6 @@
 	uint			m_chsize;	/* size of next field */
 	struct xfs_chash	*m_chash;	/* fs private inode per-cluster
 						 * hash table */
-	struct xfs_dmops	*m_dm_ops;	/* vector of DMI ops */
-	struct xfs_qmops	*m_qm_ops;	/* vector of XQM ops */
 	atomic_t		m_active_trans;	/* number trans frozen */
 #ifdef HAVE_PERCPU_SB
 	xfs_icsb_cnts_t __percpu *m_sb_cnts;	/* per-cpu superblock counters */
@@ -259,7 +198,7 @@
 	wait_queue_head_t	m_wait_single_sync_task;
 	__int64_t		m_update_flags;	/* sb flags we need to update
 						   on the next remount,rw */
-	struct list_head	m_mplist;	/* inode shrinker mount list */
+	struct shrinker		m_inode_shrink;	/* inode reclaim shrinker */
 } xfs_mount_t;
 
 /*
@@ -269,7 +208,6 @@
 						   must be synchronous except
 						   for space allocations */
 #define XFS_MOUNT_DELAYLOG	(1ULL << 1)	/* delayed logging is enabled */
-#define XFS_MOUNT_DMAPI		(1ULL << 2)	/* dmapi is enabled */
 #define XFS_MOUNT_WAS_CLEAN	(1ULL << 3)
 #define XFS_MOUNT_FS_SHUTDOWN	(1ULL << 4)	/* atomic stop of all filesystem
 						   operations, typically for
@@ -282,8 +220,6 @@
 #define XFS_MOUNT_GRPID		(1ULL << 9)	/* group-ID assigned from directory */
 #define XFS_MOUNT_NORECOVERY	(1ULL << 10)	/* no recovery - dirty fs */
 #define XFS_MOUNT_DFLT_IOSIZE	(1ULL << 12)	/* set default i/o size */
-#define XFS_MOUNT_OSYNCISOSYNC	(1ULL << 13)	/* o_sync is REALLY o_sync */
-						/* osyncisdsync is now default*/
 #define XFS_MOUNT_32BITINODES	(1ULL << 14)	/* do not create inodes above
 						 * 32 bits in size */
 #define XFS_MOUNT_SMALL_INUMS	(1ULL << 15)	/* users wants 32bit inodes */
@@ -440,11 +376,6 @@
 
 extern int	xfs_dev_is_read_only(struct xfs_mount *, char *);
 
-extern int	xfs_dmops_get(struct xfs_mount *);
-extern void	xfs_dmops_put(struct xfs_mount *);
-
-extern struct xfs_dmops xfs_dmcore_xfs;
-
 #endif	/* __KERNEL__ */
 
 extern void	xfs_mod_sb(struct xfs_trans *, __int64_t);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index fc1cda2..8fca957 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -24,12 +24,9 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
@@ -116,20 +113,7 @@
 	int		spaceres;
 	int		num_inodes;
 
-	xfs_itrace_entry(src_dp);
-	xfs_itrace_entry(target_dp);
-
-	if (DM_EVENT_ENABLED(src_dp, DM_EVENT_RENAME) ||
-	    DM_EVENT_ENABLED(target_dp, DM_EVENT_RENAME)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_RENAME,
-					src_dp, DM_RIGHT_NULL,
-					target_dp, DM_RIGHT_NULL,
-					src_name->name, target_name->name,
-					0, 0, 0);
-		if (error)
-			return error;
-	}
-	/* Return through std_return after this point. */
+	trace_xfs_rename(src_dp, target_dp, src_name, target_name);
 
 	new_parent = (src_dp != target_dp);
 	src_is_directory = ((src_ip->i_d.di_mode & S_IFMT) == S_IFDIR);
@@ -184,26 +168,14 @@
 	/*
 	 * Join all the inodes to the transaction. From this point on,
 	 * we can rely on either trans_commit or trans_cancel to unlock
-	 * them.  Note that we need to add a vnode reference to the
-	 * directories since trans_commit & trans_cancel will decrement
-	 * them when they unlock the inodes.  Also, we need to be careful
-	 * not to add an inode to the transaction more than once.
+	 * them.
 	 */
-	IHOLD(src_dp);
-	xfs_trans_ijoin(tp, src_dp, XFS_ILOCK_EXCL);
-
-	if (new_parent) {
-		IHOLD(target_dp);
-		xfs_trans_ijoin(tp, target_dp, XFS_ILOCK_EXCL);
-	}
-
-	IHOLD(src_ip);
-	xfs_trans_ijoin(tp, src_ip, XFS_ILOCK_EXCL);
-
-	if (target_ip) {
-		IHOLD(target_ip);
-		xfs_trans_ijoin(tp, target_ip, XFS_ILOCK_EXCL);
-	}
+	xfs_trans_ijoin_ref(tp, src_dp, XFS_ILOCK_EXCL);
+	if (new_parent)
+		xfs_trans_ijoin_ref(tp, target_dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, src_ip, XFS_ILOCK_EXCL);
+	if (target_ip)
+		xfs_trans_ijoin_ref(tp, target_ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * If we are using project inheritance, we only allow renames
@@ -369,26 +341,13 @@
 	 * trans_commit will unlock src_ip, target_ip & decrement
 	 * the vnode references.
 	 */
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-
-	/* Fall through to std_return with error = 0 or errno from
-	 * xfs_trans_commit	 */
-std_return:
-	if (DM_EVENT_ENABLED(src_dp, DM_EVENT_POSTRENAME) ||
-	    DM_EVENT_ENABLED(target_dp, DM_EVENT_POSTRENAME)) {
-		(void) XFS_SEND_NAMESP (mp, DM_EVENT_POSTRENAME,
-					src_dp, DM_RIGHT_NULL,
-					target_dp, DM_RIGHT_NULL,
-					src_name->name, target_name->name,
-					0, error, 0);
-	}
-	return error;
+	return xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 
  abort_return:
 	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
  error_return:
 	xfs_bmap_cancel(&free_list);
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 6be05f7..891260f 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -25,17 +25,10 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
 #include "xfs_rtalloc.h"
@@ -129,7 +122,7 @@
 		cancelflags |= XFS_TRANS_ABORT;
 		error = xfs_bmapi(tp, ip, oblocks, nblocks - oblocks,
 			XFS_BMAPI_WRITE | XFS_BMAPI_METADATA, &firstblock,
-			resblks, &map, &nmap, &flist, NULL);
+			resblks, &map, &nmap, &flist);
 		if (!error && nmap < 1)
 			error = XFS_ERROR(ENOSPC);
 		if (error)
@@ -2247,7 +2240,7 @@
 		cmn_err(CE_WARN, "XFS: realtime mount -- %llu != %llu",
 			(unsigned long long) XFS_BB_TO_FSB(mp, d),
 			(unsigned long long) mp->m_sb.sb_rblocks);
-		return XFS_ERROR(E2BIG);
+		return XFS_ERROR(EFBIG);
 	}
 	error = xfs_read_buf(mp, mp->m_rtdev_targp,
 				d - XFS_FSB_TO_BB(mp, 1),
@@ -2256,7 +2249,7 @@
 		cmn_err(CE_WARN,
 	"XFS: realtime mount -- xfs_read_buf failed, returned %d", error);
 		if (error == ENOSPC)
-			return XFS_ERROR(E2BIG);
+			return XFS_ERROR(EFBIG);
 		return error;
 	}
 	xfs_buf_relse(bp);
@@ -2277,12 +2270,12 @@
 	sbp = &mp->m_sb;
 	if (sbp->sb_rbmino == NULLFSINO)
 		return 0;
-	error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rbmino, 0, 0, &mp->m_rbmip);
 	if (error)
 		return error;
 	ASSERT(mp->m_rbmip != NULL);
 	ASSERT(sbp->sb_rsumino != NULLFSINO);
-	error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip, 0);
+	error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip);
 	if (error) {
 		IRELE(mp->m_rbmip);
 		return error;
diff --git a/fs/xfs/xfs_rtalloc.h b/fs/xfs/xfs_rtalloc.h
index b2d67ad..ff614c2 100644
--- a/fs/xfs/xfs_rtalloc.h
+++ b/fs/xfs/xfs_rtalloc.h
@@ -147,7 +147,16 @@
 # define xfs_rtfree_extent(t,b,l)                       (ENOSYS)
 # define xfs_rtpick_extent(m,t,l,rb)                    (ENOSYS)
 # define xfs_growfs_rt(mp,in)                           (ENOSYS)
-# define xfs_rtmount_init(m)    (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
+static inline int		/* error */
+xfs_rtmount_init(
+	xfs_mount_t	*mp)	/* file system mount structure */
+{
+	if (mp->m_sb.sb_rblocks == 0)
+		return 0;
+
+	cmn_err(CE_WARN, "XFS: Not built with CONFIG_XFS_RT");
+	return ENOSYS;
+}
 # define xfs_rtmount_inodes(m)  (((mp)->m_sb.sb_rblocks == 0)? 0 : (ENOSYS))
 # define xfs_rtunmount_inodes(m)
 #endif	/* CONFIG_XFS_RT */
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index e336742..56861d5 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -24,27 +24,12 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
-#include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
-#include "xfs_inode_item.h"
-#include "xfs_itable.h"
-#include "xfs_btree.h"
-#include "xfs_alloc.h"
-#include "xfs_ialloc.h"
-#include "xfs_attr.h"
-#include "xfs_bmap.h"
 #include "xfs_error.h"
-#include "xfs_buf_item.h"
 #include "xfs_rw.h"
-#include "xfs_trace.h"
 
 /*
  * Force a shutdown of the filesystem instantly while keeping
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index ce558efa..fdca741 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
+ * Copyright (C) 2010 Red Hat, Inc.
  * All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -24,16 +25,12 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_error.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
@@ -47,135 +44,491 @@
 #include "xfs_trace.h"
 
 kmem_zone_t	*xfs_trans_zone;
+kmem_zone_t	*xfs_log_item_desc_zone;
+
 
 /*
- * Reservation functions here avoid a huge stack in xfs_trans_init
- * due to register overflow from temporaries in the calculations.
+ * Various log reservation values.
+ *
+ * These are based on the size of the file system block because that is what
+ * most transactions manipulate.  Each adds in an additional 128 bytes per
+ * item logged to try to account for the overhead of the transaction mechanism.
+ *
+ * Note:  Most of the reservations underestimate the number of allocation
+ * groups into which they could free extents in the xfs_bmap_finish() call.
+ * This is because the number in the worst case is quite high and quite
+ * unusual.  In order to fix this we need to change xfs_bmap_finish() to free
+ * extents in only a single AG at a time.  This will require changes to the
+ * EFI code as well, however, so that the EFI for the extents not freed is
+ * logged again in each transaction.  See SGI PV #261917.
+ *
+ * Reservation functions here avoid a huge stack in xfs_trans_init due to
+ * register overflow from temporaries in the calculations.
+ */
+
+
+/*
+ * In a write transaction we can allocate a maximum of 2
+ * extents.  This gives:
+ *    the inode getting the new extents: inode size
+ *    the inode's bmap btree: max depth * block size
+ *    the agfs of the ags from which the extents are allocated: 2 * sector
+ *    the superblock free block counter: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ * And the bmap_finish transaction can free bmap blocks in a join:
+ *    the agfs of the ags containing the blocks: 2 * sector size
+ *    the agfls of the ags containing the blocks: 2 * sector size
+ *    the super block free block counter: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
  */
 STATIC uint
-xfs_calc_write_reservation(xfs_mount_t *mp)
+xfs_calc_write_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_WRITE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 2))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * In truncating a file we free up to two extents at once.  We can modify:
+ *    the inode being truncated: inode size
+ *    the inode's bmap btree: (max depth + 1) * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ *    the agf for each of the ags: 4 * sector size
+ *    the agfl for each of the ags: 4 * sector size
+ *    the super block to reflect the freed blocks: sector size
+ *    worst case split in allocation btrees per extent assuming 4 extents:
+ *		4 exts * 2 trees * (2 * max depth - 1) * block size
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_itruncate_reservation(xfs_mount_t *mp)
+xfs_calc_itruncate_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ITRUNCATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) +
+		     128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+		    (4 * mp->m_sb.sb_sectsize +
+		     4 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 4) +
+		     128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4)) +
+		     128 * 5 +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * In renaming a files we can modify:
+ *    the four inodes involved: 4 * inode size
+ *    the two directory btrees: 2 * (max depth + v2) * dir block size
+ *    the two directory bmap btrees: 2 * max depth * block size
+ * And the bmap_finish transaction can free dir and bmap blocks (two sets
+ *	of bmap blocks) giving:
+ *    the agf for the ags in which the blocks live: 3 * sector size
+ *    the agfl for the ags in which the blocks live: 3 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_rename_reservation(xfs_mount_t *mp)
+xfs_calc_rename_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_RENAME_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((4 * mp->m_sb.sb_inodesize +
+		     2 * XFS_DIROP_LOG_RES(mp) +
+		     128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp))),
+		    (3 * mp->m_sb.sb_sectsize +
+		     3 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 3) +
+		     128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))));
 }
 
+/*
+ * For creating a link to an inode:
+ *    the parent directory inode: inode size
+ *    the linked inode: inode size
+ *    the directory btree could split: (max depth + v2) * dir block size
+ *    the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free some bmap blocks giving:
+ *    the agf for the ag in which the blocks live: sector size
+ *    the agfl for the ag in which the blocks live: sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_link_reservation(xfs_mount_t *mp)
+xfs_calc_link_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_LINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+		    (mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * For removing a directory entry we can modify:
+ *    the parent directory inode: inode size
+ *    the removed inode: inode size
+ *    the directory btree could join: (max depth + v2) * dir block size
+ *    the directory bmap btree could join or split: (max depth + v2) * blocksize
+ * And the bmap_finish transaction can free the dir and bmap blocks giving:
+ *    the agf for the ag in which the blocks live: 2 * sector size
+ *    the agfl for the ag in which the blocks live: 2 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_remove_reservation(xfs_mount_t *mp)
+xfs_calc_remove_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_REMOVE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (2 + XFS_DIROP_LOG_COUNT(mp))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * For symlink we can modify:
+ *    the parent directory inode: inode size
+ *    the new inode: inode size
+ *    the inode btree entry: 1 block
+ *    the directory btree: (max depth + v2) * dir block size
+ *    the directory inode's bmap btree: (max depth + v2) * block size
+ *    the blocks for the symlink: 1 kB
+ * Or in the first xact we allocate some inodes giving:
+ *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_symlink_reservation(xfs_mount_t *mp)
+xfs_calc_symlink_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_SYMLINK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, 1) +
+		     XFS_DIROP_LOG_RES(mp) +
+		     1024 +
+		     128 * (4 + XFS_DIROP_LOG_COUNT(mp))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+		     XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * For create we can modify:
+ *    the parent directory inode: inode size
+ *    the new inode: inode size
+ *    the inode btree entry: block size
+ *    the superblock for the nlink flag: sector size
+ *    the directory btree: (max depth + v2) * dir block size
+ *    the directory inode's bmap btree: (max depth + v2) * block size
+ * Or in the first xact we allocate some inodes giving:
+ *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
+ *    the superblock for the nlink flag: sector size
+ *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_create_reservation(xfs_mount_t *mp)
+xfs_calc_create_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_CREATE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_inodesize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, 1) +
+		     XFS_DIROP_LOG_RES(mp) +
+		     128 * (3 + XFS_DIROP_LOG_COUNT(mp))),
+		    (3 * mp->m_sb.sb_sectsize +
+		     XFS_FSB_TO_B(mp, XFS_IALLOC_BLOCKS(mp)) +
+		     XFS_FSB_TO_B(mp, mp->m_in_maxlevels) +
+		     XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		     128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+			    XFS_ALLOCFREE_LOG_COUNT(mp, 1))));
 }
 
+/*
+ * Making a new directory is the same as creating a new file.
+ */
 STATIC uint
-xfs_calc_mkdir_reservation(xfs_mount_t *mp)
+xfs_calc_mkdir_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_MKDIR_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return xfs_calc_create_reservation(mp);
 }
 
+/*
+ * In freeing an inode we can modify:
+ *    the inode being freed: inode size
+ *    the super block free inode counter: sector size
+ *    the agi hash list and counters: sector size
+ *    the inode btree entry: block size
+ *    the on disk inode before ours in the agi hash list: inode cluster size
+ *    the inode btree: max depth * blocksize
+ *    the allocation btrees: 2 trees * (max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_ifree_reservation(xfs_mount_t *mp)
+xfs_calc_ifree_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_IFREE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, 1) +
+		MAX((__uint16_t)XFS_FSB_TO_B(mp, 1),
+		    XFS_INODE_CLUSTER_SIZE(mp)) +
+		128 * 5 +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (2 + XFS_IALLOC_BLOCKS(mp) + mp->m_in_maxlevels +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * When only changing the inode we log the inode and possibly the superblock
+ * We also add a bit of slop for the transaction stuff.
+ */
 STATIC uint
-xfs_calc_ichange_reservation(xfs_mount_t *mp)
+xfs_calc_ichange_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ICHANGE_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		512;
+
 }
 
+/*
+ * Growing the data section of the filesystem.
+ *	superblock
+ *	agi and agf
+ *	allocation btrees
+ */
 STATIC uint
-xfs_calc_growdata_reservation(xfs_mount_t *mp)
+xfs_calc_growdata_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWDATA_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize * 3 +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the first set of transactions (ALLOC) we allocate space to the
+ * bitmap or summary files.
+ *	superblock: sector size
+ *	agf of the ag from which the extent is allocated: sector size
+ *	bmap btree for bitmap/summary inode: max depth * blocksize
+ *	bitmap/summary inode: inode size
+ *	allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
+ */
 STATIC uint
-xfs_calc_growrtalloc_reservation(xfs_mount_t *mp)
+xfs_calc_growrtalloc_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTALLOC_LOG_RES(mp);
+	return 2 * mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) +
+		mp->m_sb.sb_inodesize +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the second set of transactions (ZERO) we zero the new metadata blocks.
+ *	one bitmap/summary block: blocksize
+ */
 STATIC uint
-xfs_calc_growrtzero_reservation(xfs_mount_t *mp)
+xfs_calc_growrtzero_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTZERO_LOG_RES(mp);
+	return mp->m_sb.sb_blocksize + 128;
 }
 
+/*
+ * Growing the rt section of the filesystem.
+ * In the third set of transactions (FREE) we update metadata without
+ * allocating any new blocks.
+ *	superblock: sector size
+ *	bitmap inode: inode size
+ *	summary inode: inode size
+ *	one bitmap block: blocksize
+ *	summary blocks: new summary size
+ */
 STATIC uint
-xfs_calc_growrtfree_reservation(xfs_mount_t *mp)
+xfs_calc_growrtfree_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_GROWRTFREE_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize +
+		2 * mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_blocksize +
+		mp->m_rsumsize +
+		128 * 5;
 }
 
+/*
+ * Logging the inode modification timestamp on a synchronous write.
+ *	inode
+ */
 STATIC uint
-xfs_calc_swrite_reservation(xfs_mount_t *mp)
+xfs_calc_swrite_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_SWRITE_LOG_RES(mp);
+	return mp->m_sb.sb_inodesize + 128;
 }
 
+/*
+ * Logging the inode mode bits when writing a setuid/setgid file
+ *	inode
+ */
 STATIC uint
 xfs_calc_writeid_reservation(xfs_mount_t *mp)
 {
-	return XFS_CALC_WRITEID_LOG_RES(mp);
+	return mp->m_sb.sb_inodesize + 128;
 }
 
+/*
+ * Converting the inode from non-attributed to attributed.
+ *	the inode being converted: inode size
+ *	agf block and superblock (for block allocation)
+ *	the new block (directory sized)
+ *	bmap blocks for the new directory block
+ *	allocation btrees
+ */
 STATIC uint
-xfs_calc_addafork_reservation(xfs_mount_t *mp)
+xfs_calc_addafork_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ADDAFORK_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize * 2 +
+		mp->m_dirblksize +
+		XFS_FSB_TO_B(mp, XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) +
+		XFS_ALLOCFREE_LOG_RES(mp, 1) +
+		128 * (4 + XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1 +
+		       XFS_ALLOCFREE_LOG_COUNT(mp, 1));
 }
 
+/*
+ * Removing the attribute fork of a file
+ *    the inode being truncated: inode size
+ *    the inode's bmap btree: max depth * block size
+ * And the bmap_finish transaction can free the blocks and bmap blocks:
+ *    the agf for each of the ags: 4 * sector size
+ *    the agfl for each of the ags: 4 * sector size
+ *    the super block to reflect the freed blocks: sector size
+ *    worst case split in allocation btrees per extent assuming 4 extents:
+ *		4 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_attrinval_reservation(xfs_mount_t *mp)
+xfs_calc_attrinval_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRINVAL_LOG_RES(mp);
+	return MAX((mp->m_sb.sb_inodesize +
+		    XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+		    128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))),
+		   (4 * mp->m_sb.sb_sectsize +
+		    4 * mp->m_sb.sb_sectsize +
+		    mp->m_sb.sb_sectsize +
+		    XFS_ALLOCFREE_LOG_RES(mp, 4) +
+		    128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))));
 }
 
+/*
+ * Setting an attribute.
+ *	the inode getting the attribute
+ *	the superblock for allocations
+ *	the agfs extents are allocated from
+ *	the attribute btree * max depth
+ *	the inode allocation btree
+ * Since attribute transaction space is dependent on the size of the attribute,
+ * the calculation is done partially at mount time and partially at runtime.
+ */
 STATIC uint
-xfs_calc_attrset_reservation(xfs_mount_t *mp)
+xfs_calc_attrset_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRSET_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		mp->m_sb.sb_inodesize +
+		mp->m_sb.sb_sectsize +
+		XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+		128 * (2 + XFS_DA_NODE_MAXDEPTH);
 }
 
+/*
+ * Removing an attribute.
+ *    the inode: inode size
+ *    the attribute btree could join: max depth * block size
+ *    the inode bmap btree could join or split: max depth * block size
+ * And the bmap_finish transaction can free the attr blocks freed giving:
+ *    the agf for the ag in which the blocks live: 2 * sector size
+ *    the agfl for the ag in which the blocks live: 2 * sector size
+ *    the superblock for the free block count: sector size
+ *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
+ */
 STATIC uint
-xfs_calc_attrrm_reservation(xfs_mount_t *mp)
+xfs_calc_attrrm_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_ATTRRM_LOG_RES(mp) + XFS_DQUOT_LOGRES(mp);
+	return XFS_DQUOT_LOGRES(mp) +
+		MAX((mp->m_sb.sb_inodesize +
+		     XFS_FSB_TO_B(mp, XFS_DA_NODE_MAXDEPTH) +
+		     XFS_FSB_TO_B(mp, XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) +
+		     128 * (1 + XFS_DA_NODE_MAXDEPTH +
+			    XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK))),
+		    (2 * mp->m_sb.sb_sectsize +
+		     2 * mp->m_sb.sb_sectsize +
+		     mp->m_sb.sb_sectsize +
+		     XFS_ALLOCFREE_LOG_RES(mp, 2) +
+		     128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))));
 }
 
+/*
+ * Clearing a bad agino number in an agi hash bucket.
+ */
 STATIC uint
-xfs_calc_clear_agi_bucket_reservation(xfs_mount_t *mp)
+xfs_calc_clear_agi_bucket_reservation(
+	struct xfs_mount	*mp)
 {
-	return XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp);
+	return mp->m_sb.sb_sectsize + 128;
 }
 
 /*
@@ -184,11 +537,10 @@
  */
 void
 xfs_trans_init(
-	xfs_mount_t	*mp)
+	struct xfs_mount	*mp)
 {
-	xfs_trans_reservations_t	*resp;
+	struct xfs_trans_reservations *resp = &mp->m_reservations;
 
-	resp = &(mp->m_reservations);
 	resp->tr_write = xfs_calc_write_reservation(mp);
 	resp->tr_itruncate = xfs_calc_itruncate_reservation(mp);
 	resp->tr_rename = xfs_calc_rename_reservation(mp);
@@ -243,8 +595,7 @@
 	tp->t_magic = XFS_TRANS_MAGIC;
 	tp->t_type = type;
 	tp->t_mountp = mp;
-	tp->t_items_free = XFS_LIC_NUM_SLOTS;
-	xfs_lic_init(&(tp->t_items));
+	INIT_LIST_HEAD(&tp->t_items);
 	INIT_LIST_HEAD(&tp->t_busy);
 	return tp;
 }
@@ -289,8 +640,7 @@
 	ntp->t_magic = XFS_TRANS_MAGIC;
 	ntp->t_type = tp->t_type;
 	ntp->t_mountp = tp->t_mountp;
-	ntp->t_items_free = XFS_LIC_NUM_SLOTS;
-	xfs_lic_init(&(ntp->t_items));
+	INIT_LIST_HEAD(&ntp->t_items);
 	INIT_LIST_HEAD(&ntp->t_busy);
 
 	ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
@@ -770,6 +1120,108 @@
 }
 
 /*
+ * Add the given log item to the transaction's list of log items.
+ *
+ * The log item will now point to its new descriptor with its li_desc field.
+ */
+void
+xfs_trans_add_item(
+	struct xfs_trans	*tp,
+	struct xfs_log_item	*lip)
+{
+	struct xfs_log_item_desc *lidp;
+
+	ASSERT(lip->li_mountp = tp->t_mountp);
+	ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+
+	lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
+
+	lidp->lid_item = lip;
+	lidp->lid_flags = 0;
+	lidp->lid_size = 0;
+	list_add_tail(&lidp->lid_trans, &tp->t_items);
+
+	lip->li_desc = lidp;
+}
+
+STATIC void
+xfs_trans_free_item_desc(
+	struct xfs_log_item_desc *lidp)
+{
+	list_del_init(&lidp->lid_trans);
+	kmem_zone_free(xfs_log_item_desc_zone, lidp);
+}
+
+/*
+ * Unlink and free the given descriptor.
+ */
+void
+xfs_trans_del_item(
+	struct xfs_log_item	*lip)
+{
+	xfs_trans_free_item_desc(lip->li_desc);
+	lip->li_desc = NULL;
+}
+
+/*
+ * Unlock all of the items of a transaction and free all the descriptors
+ * of that transaction.
+ */
+STATIC void
+xfs_trans_free_items(
+	struct xfs_trans	*tp,
+	xfs_lsn_t		commit_lsn,
+	int			flags)
+{
+	struct xfs_log_item_desc *lidp, *next;
+
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
+		struct xfs_log_item	*lip = lidp->lid_item;
+
+		lip->li_desc = NULL;
+
+		if (commit_lsn != NULLCOMMITLSN)
+			IOP_COMMITTING(lip, commit_lsn);
+		if (flags & XFS_TRANS_ABORT)
+			lip->li_flags |= XFS_LI_ABORTED;
+		IOP_UNLOCK(lip);
+
+		xfs_trans_free_item_desc(lidp);
+	}
+}
+
+/*
+ * Unlock the items associated with a transaction.
+ *
+ * Items which were not logged should be freed.  Those which were logged must
+ * still be tracked so they can be unpinned when the transaction commits.
+ */
+STATIC void
+xfs_trans_unlock_items(
+	struct xfs_trans	*tp,
+	xfs_lsn_t		commit_lsn)
+{
+	struct xfs_log_item_desc *lidp, *next;
+
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
+		struct xfs_log_item	*lip = lidp->lid_item;
+
+		lip->li_desc = NULL;
+
+		if (commit_lsn != NULLCOMMITLSN)
+			IOP_COMMITTING(lip, commit_lsn);
+		IOP_UNLOCK(lip);
+
+		/*
+		 * Free the descriptor if the item is not dirty
+		 * within this transaction.
+		 */
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
+			xfs_trans_free_item_desc(lidp);
+	}
+}
+
+/*
  * Total up the number of log iovecs needed to commit this
  * transaction.  The transaction itself needs one for the
  * transaction header.  Ask each dirty item in turn how many
@@ -780,30 +1232,27 @@
 	struct xfs_trans	*tp)
 {
 	int			nvecs;
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 
 	nvecs = 1;
-	lidp = xfs_trans_first_item(tp);
-	ASSERT(lidp != NULL);
 
 	/* In the non-debug case we need to start bailing out if we
 	 * didn't find a log_item here, return zero and let trans_commit
 	 * deal with it.
 	 */
-	if (lidp == NULL)
+	if (list_empty(&tp->t_items)) {
+		ASSERT(0);
 		return 0;
+	}
 
-	while (lidp != NULL) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/*
 		 * Skip items which aren't dirty in this transaction.
 		 */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 		lidp->lid_size = IOP_SIZE(lidp->lid_item);
 		nvecs += lidp->lid_size;
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	return nvecs;
@@ -823,7 +1272,7 @@
 	struct xfs_trans	*tp,
 	struct xfs_log_iovec	*log_vector)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 	struct xfs_log_iovec	*vecp;
 	uint			nitems;
 
@@ -834,14 +1283,11 @@
 	vecp = log_vector + 1;
 
 	nitems = 0;
-	lidp = xfs_trans_first_item(tp);
-	ASSERT(lidp);
-	while (lidp) {
+	ASSERT(!list_empty(&tp->t_items));
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/* Skip items which aren't dirty in this transaction. */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 
 		/*
 		 * The item may be marked dirty but not log anything.  This can
@@ -852,7 +1298,6 @@
 		IOP_FORMAT(lidp->lid_item, vecp);
 		vecp += lidp->lid_size;
 		IOP_PIN(lidp->lid_item);
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	/*
@@ -930,7 +1375,7 @@
 	 * log item flags, if anyone else stales the buffer we do not want to
 	 * pay any attention to it.
 	 */
-	IOP_UNPIN(lip);
+	IOP_UNPIN(lip, 0);
 }
 
 /*
@@ -947,24 +1392,15 @@
 	struct xfs_trans	*tp,
 	int			abortflag)
 {
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
+	struct xfs_log_item_desc *lidp, *next;
 
 	/* Call the transaction's completion callback if there is one. */
 	if (tp->t_callback != NULL)
 		tp->t_callback(tp, tp->t_callarg);
 
-	for (lidp = xfs_trans_first_item(tp);
-	     lidp != NULL;
-	     lidp = xfs_trans_next_item(tp, lidp)) {
+	list_for_each_entry_safe(lidp, next, &tp->t_items, lid_trans) {
 		xfs_trans_item_committed(lidp->lid_item, tp->t_lsn, abortflag);
-	}
-
-	/* free the item chunks, ignoring the embedded chunk */
-	for (licp = tp->t_items.lic_next; licp != NULL; licp = next_licp) {
-		next_licp = licp->lic_next;
-		kmem_free(licp);
+		xfs_trans_free_item_desc(lidp);
 	}
 
 	xfs_trans_free(tp);
@@ -979,16 +1415,14 @@
 	struct xfs_trans	*tp,
 	uint			flags)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 
-	for (lidp = xfs_trans_first_item(tp);
-	     lidp != NULL;
-	     lidp = xfs_trans_next_item(tp, lidp)) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		/*
 		 * Unpin all but those that aren't dirty.
 		 */
 		if (lidp->lid_flags & XFS_LID_DIRTY)
-			IOP_UNPIN_REMOVE(lidp->lid_item, tp);
+			IOP_UNPIN(lidp->lid_item, 1);
 	}
 
 	xfs_trans_unreserve_and_mod_sb(tp);
@@ -1154,33 +1588,28 @@
 xfs_trans_alloc_log_vecs(
 	xfs_trans_t	*tp)
 {
-	xfs_log_item_desc_t	*lidp;
+	struct xfs_log_item_desc *lidp;
 	struct xfs_log_vec	*lv = NULL;
 	struct xfs_log_vec	*ret_lv = NULL;
 
-	lidp = xfs_trans_first_item(tp);
 
 	/* Bail out if we didn't find a log item.  */
-	if (!lidp) {
+	if (list_empty(&tp->t_items)) {
 		ASSERT(0);
 		return NULL;
 	}
 
-	while (lidp != NULL) {
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
 		struct xfs_log_vec *new_lv;
 
 		/* Skip items which aren't dirty in this transaction. */
-		if (!(lidp->lid_flags & XFS_LID_DIRTY)) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!(lidp->lid_flags & XFS_LID_DIRTY))
 			continue;
-		}
 
 		/* Skip items that do not have any vectors for writing */
 		lidp->lid_size = IOP_SIZE(lidp->lid_item);
-		if (!lidp->lid_size) {
-			lidp = xfs_trans_next_item(tp, lidp);
+		if (!lidp->lid_size)
 			continue;
-		}
 
 		new_lv = kmem_zalloc(sizeof(*new_lv) +
 				lidp->lid_size * sizeof(struct xfs_log_iovec),
@@ -1195,7 +1624,6 @@
 		else
 			lv->lv_next = new_lv;
 		lv = new_lv;
-		lidp = xfs_trans_next_item(tp, lidp);
 	}
 
 	return ret_lv;
@@ -1354,12 +1782,6 @@
 	int			flags)
 {
 	int			log_flags;
-#ifdef DEBUG
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_t		*lip;
-	int			i;
-#endif
 	xfs_mount_t		*mp = tp->t_mountp;
 
 	/*
@@ -1378,21 +1800,11 @@
 		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 	}
 #ifdef DEBUG
-	if (!(flags & XFS_TRANS_ABORT)) {
-		licp = &(tp->t_items);
-		while (licp != NULL) {
-			lidp = licp->lic_descs;
-			for (i = 0; i < licp->lic_unused; i++, lidp++) {
-				if (xfs_lic_isfree(licp, i)) {
-					continue;
-				}
+	if (!(flags & XFS_TRANS_ABORT) && !XFS_FORCED_SHUTDOWN(mp)) {
+		struct xfs_log_item_desc *lidp;
 
-				lip = lidp->lid_item;
-				if (!XFS_FORCED_SHUTDOWN(mp))
-					ASSERT(!(lip->li_type == XFS_LI_EFD));
-			}
-			licp = licp->lic_next;
-		}
+		list_for_each_entry(lidp, &tp->t_items, lid_trans)
+			ASSERT(!(lidp->lid_item->li_type == XFS_LI_EFD));
 	}
 #endif
 	xfs_trans_unreserve_and_mod_sb(tp);
@@ -1480,7 +1892,6 @@
 	if (error)
 		return error;
 
-	xfs_trans_ijoin(trans, dp, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(trans, dp);
+	xfs_trans_ijoin(trans, dp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 8c69e78..c13c0f9 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -161,105 +161,14 @@
  * the amount of space needed to log the item it describes
  * once we get to commit processing (see xfs_trans_commit()).
  */
-typedef struct xfs_log_item_desc {
+struct xfs_log_item_desc {
 	struct xfs_log_item	*lid_item;
-	ushort		lid_size;
-	unsigned char	lid_flags;
-	unsigned char	lid_index;
-} xfs_log_item_desc_t;
+	ushort			lid_size;
+	unsigned char		lid_flags;
+	struct list_head	lid_trans;
+};
 
 #define XFS_LID_DIRTY		0x1
-#define XFS_LID_PINNED		0x2
-
-/*
- * This structure is used to maintain a chunk list of log_item_desc
- * structures. The free field is a bitmask indicating which descriptors
- * in this chunk's array are free.  The unused field is the first value
- * not used since this chunk was allocated.
- */
-#define	XFS_LIC_NUM_SLOTS	15
-typedef struct xfs_log_item_chunk {
-	struct xfs_log_item_chunk	*lic_next;
-	ushort				lic_free;
-	ushort				lic_unused;
-	xfs_log_item_desc_t		lic_descs[XFS_LIC_NUM_SLOTS];
-} xfs_log_item_chunk_t;
-
-#define	XFS_LIC_MAX_SLOT	(XFS_LIC_NUM_SLOTS - 1)
-#define	XFS_LIC_FREEMASK	((1 << XFS_LIC_NUM_SLOTS) - 1)
-
-
-/*
- * Initialize the given chunk.  Set the chunk's free descriptor mask
- * to indicate that all descriptors are free.  The caller gets to set
- * lic_unused to the right value (0 matches all free).  The
- * lic_descs.lid_index values are set up as each desc is allocated.
- */
-static inline void xfs_lic_init(xfs_log_item_chunk_t *cp)
-{
-	cp->lic_free = XFS_LIC_FREEMASK;
-}
-
-static inline void xfs_lic_init_slot(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_descs[slot].lid_index = (unsigned char)(slot);
-}
-
-static inline int xfs_lic_vacancy(xfs_log_item_chunk_t *cp)
-{
-	return cp->lic_free & XFS_LIC_FREEMASK;
-}
-
-static inline void xfs_lic_all_free(xfs_log_item_chunk_t *cp)
-{
-	cp->lic_free = XFS_LIC_FREEMASK;
-}
-
-static inline int xfs_lic_are_all_free(xfs_log_item_chunk_t *cp)
-{
-	return ((cp->lic_free & XFS_LIC_FREEMASK) == XFS_LIC_FREEMASK);
-}
-
-static inline int xfs_lic_isfree(xfs_log_item_chunk_t *cp, int slot)
-{
-	return (cp->lic_free & (1 << slot));
-}
-
-static inline void xfs_lic_claim(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_free &= ~(1 << slot);
-}
-
-static inline void xfs_lic_relse(xfs_log_item_chunk_t *cp, int slot)
-{
-	cp->lic_free |= 1 << slot;
-}
-
-static inline xfs_log_item_desc_t *
-xfs_lic_slot(xfs_log_item_chunk_t *cp, int slot)
-{
-	return &(cp->lic_descs[slot]);
-}
-
-static inline int xfs_lic_desc_to_slot(xfs_log_item_desc_t *dp)
-{
-	return (uint)dp->lid_index;
-}
-
-/*
- * Calculate the address of a chunk given a descriptor pointer:
- * dp - dp->lid_index give the address of the start of the lic_descs array.
- * From this we subtract the offset of the lic_descs field in a chunk.
- * All of this yields the address of the chunk, which is
- * cast to a chunk pointer.
- */
-static inline xfs_log_item_chunk_t *
-xfs_lic_desc_to_chunk(xfs_log_item_desc_t *dp)
-{
-	return (xfs_log_item_chunk_t*) \
-		(((xfs_caddr_t)((dp) - (dp)->lid_index)) - \
-		(xfs_caddr_t)(((xfs_log_item_chunk_t*)0)->lic_descs));
-}
 
 #define	XFS_TRANS_MAGIC		0x5452414E	/* 'TRAN' */
 /*
@@ -275,8 +184,6 @@
 /*
  * Values for call flags parameter.
  */
-#define	XFS_TRANS_NOSLEEP		0x1
-#define	XFS_TRANS_WAIT			0x2
 #define	XFS_TRANS_RELEASE_LOG_RES	0x4
 #define	XFS_TRANS_ABORT			0x8
 
@@ -300,24 +207,6 @@
 
 
 /*
- * Various log reservation values.
- * These are based on the size of the file system block
- * because that is what most transactions manipulate.
- * Each adds in an additional 128 bytes per item logged to
- * try to account for the overhead of the transaction mechanism.
- *
- * Note:
- * Most of the reservations underestimate the number of allocation
- * groups into which they could free extents in the xfs_bmap_finish()
- * call.  This is because the number in the worst case is quite high
- * and quite unusual.  In order to fix this we need to change
- * xfs_bmap_finish() to free extents in only a single AG at a time.
- * This will require changes to the EFI code as well, however, so that
- * the EFI for the extents not freed is logged again in each transaction.
- * See bug 261917.
- */
-
-/*
  * Per-extent log reservation for the allocation btree changes
  * involved in freeing or allocating an extent.
  * 2 trees * (2 blocks/level * max depth - 1) * block size
@@ -341,429 +230,36 @@
 	(XFS_DAENTER_BLOCKS(mp, XFS_DATA_FORK) + \
 	 XFS_DAENTER_BMAPS(mp, XFS_DATA_FORK) + 1)
 
-/*
- * In a write transaction we can allocate a maximum of 2
- * extents.  This gives:
- *    the inode getting the new extents: inode size
- *    the inode's bmap btree: max depth * block size
- *    the agfs of the ags from which the extents are allocated: 2 * sector
- *    the superblock free block counter: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- * And the bmap_finish transaction can free bmap blocks in a join:
- *    the agfs of the ags containing the blocks: 2 * sector size
- *    the agfls of the ags containing the blocks: 2 * sector size
- *    the super block free block counter: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define XFS_CALC_WRITE_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (4 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + XFS_ALLOCFREE_LOG_COUNT(mp, 2)))),\
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
 
 #define	XFS_WRITE_LOG_RES(mp)	((mp)->m_reservations.tr_write)
-
-/*
- * In truncating a file we free up to two extents at once.  We can modify:
- *    the inode being truncated: inode size
- *    the inode's bmap btree: (max depth + 1) * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- *    the agf for each of the ags: 4 * sector size
- *    the agfl for each of the ags: 4 * sector size
- *    the super block to reflect the freed blocks: sector size
- *    worst case split in allocation btrees per extent assuming 4 extents:
- *		4 exts * 2 trees * (2 * max depth - 1) * block size
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_ITRUNCATE_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + 1) + \
-	  (128 * (2 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
-	 ((4 * (mp)->m_sb.sb_sectsize) + \
-	  (4 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 4) + \
-	  (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))) + \
-	  (128 * 5) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	   (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	    XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_ITRUNCATE_LOG_RES(mp)   ((mp)->m_reservations.tr_itruncate)
-
-/*
- * In renaming a files we can modify:
- *    the four inodes involved: 4 * inode size
- *    the two directory btrees: 2 * (max depth + v2) * dir block size
- *    the two directory bmap btrees: 2 * max depth * block size
- * And the bmap_finish transaction can free dir and bmap blocks (two sets
- *	of bmap blocks) giving:
- *    the agf for the ags in which the blocks live: 3 * sector size
- *    the agfl for the ags in which the blocks live: 3 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 3 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_RENAME_LOG_RES(mp) \
-	(MAX( \
-	 ((4 * (mp)->m_sb.sb_inodesize) + \
-	  (2 * XFS_DIROP_LOG_RES(mp)) + \
-	  (128 * (4 + 2 * XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((3 * (mp)->m_sb.sb_sectsize) + \
-	  (3 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 3) + \
-	  (128 * (7 + XFS_ALLOCFREE_LOG_COUNT(mp, 3))))))
-
 #define	XFS_RENAME_LOG_RES(mp)	((mp)->m_reservations.tr_rename)
-
-/*
- * For creating a link to an inode:
- *    the parent directory inode: inode size
- *    the linked inode: inode size
- *    the directory btree could split: (max depth + v2) * dir block size
- *    the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free some bmap blocks giving:
- *    the agf for the ag in which the blocks live: sector size
- *    the agfl for the ag in which the blocks live: sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_LINK_LOG_RES(mp) \
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((mp)->m_sb.sb_sectsize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_LINK_LOG_RES(mp)	((mp)->m_reservations.tr_link)
-
-/*
- * For removing a directory entry we can modify:
- *    the parent directory inode: inode size
- *    the removed inode: inode size
- *    the directory btree could join: (max depth + v2) * dir block size
- *    the directory bmap btree could join or split: (max depth + v2) * blocksize
- * And the bmap_finish transaction can free the dir and bmap blocks giving:
- *    the agf for the ag in which the blocks live: 2 * sector size
- *    the agfl for the ag in which the blocks live: 2 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_REMOVE_LOG_RES(mp)	\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (2 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
 #define	XFS_REMOVE_LOG_RES(mp)	((mp)->m_reservations.tr_remove)
-
-/*
- * For symlink we can modify:
- *    the parent directory inode: inode size
- *    the new inode: inode size
- *    the inode btree entry: 1 block
- *    the directory btree: (max depth + v2) * dir block size
- *    the directory inode's bmap btree: (max depth + v2) * block size
- *    the blocks for the symlink: 1 kB
- * Or in the first xact we allocate some inodes giving:
- *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
- *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_SYMLINK_LOG_RES(mp)		\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B(mp, 1) + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  1024 + \
-	  (128 * (4 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 (2 * (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
-	  XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_SYMLINK_LOG_RES(mp)	((mp)->m_reservations.tr_symlink)
-
-/*
- * For create we can modify:
- *    the parent directory inode: inode size
- *    the new inode: inode size
- *    the inode btree entry: block size
- *    the superblock for the nlink flag: sector size
- *    the directory btree: (max depth + v2) * dir block size
- *    the directory inode's bmap btree: (max depth + v2) * block size
- * Or in the first xact we allocate some inodes giving:
- *    the agi and agf of the ag getting the new inodes: 2 * sectorsize
- *    the superblock for the nlink flag: sector size
- *    the inode blocks allocated: XFS_IALLOC_BLOCKS * blocksize
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_CREATE_LOG_RES(mp)		\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_inodesize + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B(mp, 1) + \
-	  XFS_DIROP_LOG_RES(mp) + \
-	  (128 * (3 + XFS_DIROP_LOG_COUNT(mp)))), \
-	 (3 * (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_IALLOC_BLOCKS((mp))) + \
-	  XFS_FSB_TO_B((mp), (mp)->m_in_maxlevels) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))))
-
 #define	XFS_CREATE_LOG_RES(mp)	((mp)->m_reservations.tr_create)
-
-/*
- * Making a new directory is the same as creating a new file.
- */
-#define	XFS_CALC_MKDIR_LOG_RES(mp)	XFS_CALC_CREATE_LOG_RES(mp)
-
 #define	XFS_MKDIR_LOG_RES(mp)	((mp)->m_reservations.tr_mkdir)
-
-/*
- * In freeing an inode we can modify:
- *    the inode being freed: inode size
- *    the super block free inode counter: sector size
- *    the agi hash list and counters: sector size
- *    the inode btree entry: block size
- *    the on disk inode before ours in the agi hash list: inode cluster size
- *    the inode btree: max depth * blocksize
- *    the allocation btrees: 2 trees * (max depth - 1) * block size
- */
-#define	XFS_CALC_IFREE_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize + \
-	 (mp)->m_sb.sb_sectsize + \
-	 XFS_FSB_TO_B((mp), 1) + \
-	 MAX((__uint16_t)XFS_FSB_TO_B((mp), 1), XFS_INODE_CLUSTER_SIZE(mp)) + \
-	 (128 * 5) + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	  (128 * (2 + XFS_IALLOC_BLOCKS(mp) + (mp)->m_in_maxlevels + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
-
 #define	XFS_IFREE_LOG_RES(mp)	((mp)->m_reservations.tr_ifree)
-
-/*
- * When only changing the inode we log the inode and possibly the superblock
- * We also add a bit of slop for the transaction stuff.
- */
-#define	XFS_CALC_ICHANGE_LOG_RES(mp)	((mp)->m_sb.sb_inodesize + \
-					 (mp)->m_sb.sb_sectsize + 512)
-
 #define	XFS_ICHANGE_LOG_RES(mp)	((mp)->m_reservations.tr_ichange)
-
-/*
- * Growing the data section of the filesystem.
- *	superblock
- *	agi and agf
- *	allocation btrees
- */
-#define	XFS_CALC_GROWDATA_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize * 3 + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * (3 + XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_GROWDATA_LOG_RES(mp)    ((mp)->m_reservations.tr_growdata)
-
-/*
- * Growing the rt section of the filesystem.
- * In the first set of transactions (ALLOC) we allocate space to the
- * bitmap or summary files.
- *	superblock: sector size
- *	agf of the ag from which the extent is allocated: sector size
- *	bmap btree for bitmap/summary inode: max depth * blocksize
- *	bitmap/summary inode: inode size
- *	allocation btrees for 1 block alloc: 2 * (2 * maxdepth - 1) * blocksize
- */
-#define	XFS_CALC_GROWRTALLOC_LOG_RES(mp) \
-	(2 * (mp)->m_sb.sb_sectsize + \
-	 XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)) + \
-	 (mp)->m_sb.sb_inodesize + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * \
-	  (3 + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK) + \
-	   XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_GROWRTALLOC_LOG_RES(mp)	((mp)->m_reservations.tr_growrtalloc)
-
-/*
- * Growing the rt section of the filesystem.
- * In the second set of transactions (ZERO) we zero the new metadata blocks.
- *	one bitmap/summary block: blocksize
- */
-#define	XFS_CALC_GROWRTZERO_LOG_RES(mp) \
-	((mp)->m_sb.sb_blocksize + 128)
-
 #define	XFS_GROWRTZERO_LOG_RES(mp)	((mp)->m_reservations.tr_growrtzero)
-
-/*
- * Growing the rt section of the filesystem.
- * In the third set of transactions (FREE) we update metadata without
- * allocating any new blocks.
- *	superblock: sector size
- *	bitmap inode: inode size
- *	summary inode: inode size
- *	one bitmap block: blocksize
- *	summary blocks: new summary size
- */
-#define	XFS_CALC_GROWRTFREE_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize + \
-	 2 * (mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_blocksize + \
-	 (mp)->m_rsumsize + \
-	 (128 * 5))
-
 #define	XFS_GROWRTFREE_LOG_RES(mp)	((mp)->m_reservations.tr_growrtfree)
-
-/*
- * Logging the inode modification timestamp on a synchronous write.
- *	inode
- */
-#define	XFS_CALC_SWRITE_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + 128)
-
 #define	XFS_SWRITE_LOG_RES(mp)	((mp)->m_reservations.tr_swrite)
-
 /*
  * Logging the inode timestamps on an fsync -- same as SWRITE
  * as long as SWRITE logs the entire inode core
  */
 #define XFS_FSYNC_TS_LOG_RES(mp)        ((mp)->m_reservations.tr_swrite)
-
-/*
- * Logging the inode mode bits when writing a setuid/setgid file
- *	inode
- */
-#define	XFS_CALC_WRITEID_LOG_RES(mp) \
-	((mp)->m_sb.sb_inodesize + 128)
-
 #define	XFS_WRITEID_LOG_RES(mp)	((mp)->m_reservations.tr_swrite)
-
-/*
- * Converting the inode from non-attributed to attributed.
- *	the inode being converted: inode size
- *	agf block and superblock (for block allocation)
- *	the new block (directory sized)
- *	bmap blocks for the new directory block
- *	allocation btrees
- */
-#define	XFS_CALC_ADDAFORK_LOG_RES(mp)	\
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize * 2 + \
-	 (mp)->m_dirblksize + \
-	 XFS_FSB_TO_B(mp, (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1)) + \
-	 XFS_ALLOCFREE_LOG_RES(mp, 1) + \
-	 (128 * (4 + (XFS_DAENTER_BMAP1B(mp, XFS_DATA_FORK) + 1) + \
-		 XFS_ALLOCFREE_LOG_COUNT(mp, 1))))
-
 #define	XFS_ADDAFORK_LOG_RES(mp)	((mp)->m_reservations.tr_addafork)
-
-/*
- * Removing the attribute fork of a file
- *    the inode being truncated: inode size
- *    the inode's bmap btree: max depth * block size
- * And the bmap_finish transaction can free the blocks and bmap blocks:
- *    the agf for each of the ags: 4 * sector size
- *    the agfl for each of the ags: 4 * sector size
- *    the super block to reflect the freed blocks: sector size
- *    worst case split in allocation btrees per extent assuming 4 extents:
- *		4 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_ATTRINVAL_LOG_RES(mp)	\
-	(MAX( \
-	 ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
-	  (128 * (1 + XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))), \
-	 ((4 * (mp)->m_sb.sb_sectsize) + \
-	  (4 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 4) + \
-	  (128 * (9 + XFS_ALLOCFREE_LOG_COUNT(mp, 4))))))
-
 #define	XFS_ATTRINVAL_LOG_RES(mp)	((mp)->m_reservations.tr_attrinval)
-
-/*
- * Setting an attribute.
- *	the inode getting the attribute
- *	the superblock for allocations
- *	the agfs extents are allocated from
- *	the attribute btree * max depth
- *	the inode allocation btree
- * Since attribute transaction space is dependent on the size of the attribute,
- * the calculation is done partially at mount time and partially at runtime.
- */
-#define	XFS_CALC_ATTRSET_LOG_RES(mp)	\
-	((mp)->m_sb.sb_inodesize + \
-	 (mp)->m_sb.sb_sectsize + \
-	  XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
-	  (128 * (2 + XFS_DA_NODE_MAXDEPTH)))
-
 #define	XFS_ATTRSET_LOG_RES(mp, ext)	\
 	((mp)->m_reservations.tr_attrset + \
 	 (ext * (mp)->m_sb.sb_sectsize) + \
 	 (ext * XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK))) + \
 	 (128 * (ext + (ext * XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)))))
-
-/*
- * Removing an attribute.
- *    the inode: inode size
- *    the attribute btree could join: max depth * block size
- *    the inode bmap btree could join or split: max depth * block size
- * And the bmap_finish transaction can free the attr blocks freed giving:
- *    the agf for the ag in which the blocks live: 2 * sector size
- *    the agfl for the ag in which the blocks live: 2 * sector size
- *    the superblock for the free block count: sector size
- *    the allocation btrees: 2 exts * 2 trees * (2 * max depth - 1) * block size
- */
-#define	XFS_CALC_ATTRRM_LOG_RES(mp)	\
-	(MAX( \
-	  ((mp)->m_sb.sb_inodesize + \
-	  XFS_FSB_TO_B((mp), XFS_DA_NODE_MAXDEPTH) + \
-	  XFS_FSB_TO_B((mp), XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK)) + \
-	  (128 * (1 + XFS_DA_NODE_MAXDEPTH + XFS_BM_MAXLEVELS(mp, XFS_DATA_FORK)))), \
-	 ((2 * (mp)->m_sb.sb_sectsize) + \
-	  (2 * (mp)->m_sb.sb_sectsize) + \
-	  (mp)->m_sb.sb_sectsize + \
-	  XFS_ALLOCFREE_LOG_RES(mp, 2) + \
-	  (128 * (5 + XFS_ALLOCFREE_LOG_COUNT(mp, 2))))))
-
 #define	XFS_ATTRRM_LOG_RES(mp)	((mp)->m_reservations.tr_attrrm)
-
-/*
- * Clearing a bad agino number in an agi hash bucket.
- */
-#define	XFS_CALC_CLEAR_AGI_BUCKET_LOG_RES(mp) \
-	((mp)->m_sb.sb_sectsize + 128)
-
 #define	XFS_CLEAR_AGI_BUCKET_LOG_RES(mp)  ((mp)->m_reservations.tr_clearagi)
 
 
@@ -849,8 +345,7 @@
 	uint (*iop_size)(xfs_log_item_t *);
 	void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
 	void (*iop_pin)(xfs_log_item_t *);
-	void (*iop_unpin)(xfs_log_item_t *);
-	void (*iop_unpin_remove)(xfs_log_item_t *, struct xfs_trans *);
+	void (*iop_unpin)(xfs_log_item_t *, int remove);
 	uint (*iop_trylock)(xfs_log_item_t *);
 	void (*iop_unlock)(xfs_log_item_t *);
 	xfs_lsn_t (*iop_committed)(xfs_log_item_t *, xfs_lsn_t);
@@ -862,8 +357,7 @@
 #define IOP_SIZE(ip)		(*(ip)->li_ops->iop_size)(ip)
 #define IOP_FORMAT(ip,vp)	(*(ip)->li_ops->iop_format)(ip, vp)
 #define IOP_PIN(ip)		(*(ip)->li_ops->iop_pin)(ip)
-#define IOP_UNPIN(ip)		(*(ip)->li_ops->iop_unpin)(ip)
-#define IOP_UNPIN_REMOVE(ip,tp) (*(ip)->li_ops->iop_unpin_remove)(ip, tp)
+#define IOP_UNPIN(ip, remove)	(*(ip)->li_ops->iop_unpin)(ip, remove)
 #define IOP_TRYLOCK(ip)		(*(ip)->li_ops->iop_trylock)(ip)
 #define IOP_UNLOCK(ip)		(*(ip)->li_ops->iop_unlock)(ip)
 #define IOP_COMMITTED(ip, lsn)	(*(ip)->li_ops->iop_committed)(ip, lsn)
@@ -927,8 +421,7 @@
 	int64_t			t_rblocks_delta;/* superblock rblocks change */
 	int64_t			t_rextents_delta;/* superblocks rextents chg */
 	int64_t			t_rextslog_delta;/* superblocks rextslog chg */
-	unsigned int		t_items_free;	/* log item descs free */
-	xfs_log_item_chunk_t	t_items;	/* first log item desc chunk */
+	struct list_head	t_items;	/* log item descriptors */
 	xfs_trans_header_t	t_header;	/* header for in-log trans */
 	struct list_head	t_busy;		/* list of busy extents */
 	unsigned long		t_pflags;	/* saved process flags state */
@@ -980,8 +473,8 @@
 void		xfs_trans_inode_alloc_buf(xfs_trans_t *, struct xfs_buf *);
 int		xfs_trans_iget(struct xfs_mount *, xfs_trans_t *,
 			       xfs_ino_t , uint, uint, struct xfs_inode **);
-void		xfs_trans_ijoin(xfs_trans_t *, struct xfs_inode *, uint);
-void		xfs_trans_ihold(xfs_trans_t *, struct xfs_inode *);
+void		xfs_trans_ijoin_ref(struct xfs_trans *, struct xfs_inode *, uint);
+void		xfs_trans_ijoin(struct xfs_trans *, struct xfs_inode *);
 void		xfs_trans_log_buf(xfs_trans_t *, struct xfs_buf *, uint, uint);
 void		xfs_trans_log_inode(xfs_trans_t *, struct xfs_inode *, uint);
 struct xfs_efi_log_item	*xfs_trans_get_efi(xfs_trans_t *, uint);
@@ -1006,6 +499,7 @@
 void		xfs_trans_ail_destroy(struct xfs_mount *);
 
 extern kmem_zone_t	*xfs_trans_zone;
+extern kmem_zone_t	*xfs_log_item_desc_zone;
 
 #endif	/* __KERNEL__ */
 
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index e799824..dc90695 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -24,7 +24,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_error.h"
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index 63d81a2..90af025 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -24,14 +24,10 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_buf_item.h"
@@ -51,36 +47,17 @@
 	xfs_daddr_t		blkno,
 	int			len)
 {
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_desc_t	*lidp;
-	xfs_buf_log_item_t	*blip;
-	int			i;
+	struct xfs_log_item_desc *lidp;
+	struct xfs_buf_log_item	*blip;
 
 	len = BBTOB(len);
-	for (licp = &tp->t_items; licp != NULL; licp = licp->lic_next) {
-		if (xfs_lic_are_all_free(licp)) {
-			ASSERT(licp == &tp->t_items);
-			ASSERT(licp->lic_next == NULL);
-			return NULL;
-		}
-
-		for (i = 0; i < licp->lic_unused; i++) {
-			/*
-			 * Skip unoccupied slots.
-			 */
-			if (xfs_lic_isfree(licp, i))
-				continue;
-
-			lidp = xfs_lic_slot(licp, i);
-			blip = (xfs_buf_log_item_t *)lidp->lid_item;
-			if (blip->bli_item.li_type != XFS_LI_BUF)
-				continue;
-
-			if (XFS_BUF_TARGET(blip->bli_buf) == target &&
-			    XFS_BUF_ADDR(blip->bli_buf) == blkno &&
-			    XFS_BUF_COUNT(blip->bli_buf) == len)
-				return blip->bli_buf;
-		}
+	list_for_each_entry(lidp, &tp->t_items, lid_trans) {
+		blip = (struct xfs_buf_log_item *)lidp->lid_item;
+		if (blip->bli_item.li_type == XFS_LI_BUF &&
+		    XFS_BUF_TARGET(blip->bli_buf) == target &&
+		    XFS_BUF_ADDR(blip->bli_buf) == blkno &&
+		    XFS_BUF_COUNT(blip->bli_buf) == len)
+			return blip->bli_buf;
 	}
 
 	return NULL;
@@ -127,7 +104,7 @@
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t *)bip);
+	xfs_trans_add_item(tp, &bip->bli_item);
 
 	/*
 	 * Initialize b_fsprivate2 so we can find it with incore_match()
@@ -483,7 +460,6 @@
 {
 	xfs_buf_log_item_t	*bip;
 	xfs_log_item_t		*lip;
-	xfs_log_item_desc_t	*lidp;
 
 	/*
 	 * Default to a normal brelse() call if the tp is NULL.
@@ -514,13 +490,6 @@
 	ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
-	/*
-	 * Find the item descriptor pointing to this buffer's
-	 * log item.  It must be there.
-	 */
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
-
 	trace_xfs_trans_brelse(bip);
 
 	/*
@@ -536,7 +505,7 @@
 	 * If the buffer is dirty within this transaction, we can't
 	 * release it until we commit.
 	 */
-	if (lidp->lid_flags & XFS_LID_DIRTY)
+	if (bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY)
 		return;
 
 	/*
@@ -553,7 +522,7 @@
 	/*
 	 * Free up the log item descriptor tracking the released item.
 	 */
-	xfs_trans_free_item(tp, lidp);
+	xfs_trans_del_item(&bip->bli_item);
 
 	/*
 	 * Clear the hold flag in the buf log item if it is set.
@@ -665,7 +634,6 @@
 		  uint		last)
 {
 	xfs_buf_log_item_t	*bip;
-	xfs_log_item_desc_t	*lidp;
 
 	ASSERT(XFS_BUF_ISBUSY(bp));
 	ASSERT(XFS_BUF_FSPRIVATE2(bp, xfs_trans_t *) == tp);
@@ -690,7 +658,7 @@
 	bip = XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	XFS_BUF_SET_IODONE_FUNC(bp, xfs_buf_iodone_callbacks);
-	bip->bli_item.li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*))xfs_buf_iodone;
+	bip->bli_item.li_cb = xfs_buf_iodone;
 
 	trace_xfs_trans_log_buf(bip);
 
@@ -707,11 +675,8 @@
 		bip->bli_format.blf_flags &= ~XFS_BLF_CANCEL;
 	}
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 	bip->bli_flags |= XFS_BLI_LOGGED;
 	xfs_buf_item_log(bip, first, last);
 }
@@ -740,7 +705,6 @@
 	xfs_trans_t	*tp,
 	xfs_buf_t	*bp)
 {
-	xfs_log_item_desc_t	*lidp;
 	xfs_buf_log_item_t	*bip;
 
 	ASSERT(XFS_BUF_ISBUSY(bp));
@@ -748,8 +712,6 @@
 	ASSERT(XFS_BUF_FSPRIVATE(bp, void *) != NULL);
 
 	bip = XFS_BUF_FSPRIVATE(bp, xfs_buf_log_item_t *);
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)bip);
-	ASSERT(lidp != NULL);
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
 	trace_xfs_trans_binval(bip);
@@ -764,7 +726,7 @@
 		ASSERT(!(bip->bli_flags & (XFS_BLI_LOGGED | XFS_BLI_DIRTY)));
 		ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_INODE_BUF));
 		ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
-		ASSERT(lidp->lid_flags & XFS_LID_DIRTY);
+		ASSERT(bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY);
 		ASSERT(tp->t_flags & XFS_TRANS_DIRTY);
 		return;
 	}
@@ -797,7 +759,7 @@
 	bip->bli_format.blf_flags |= XFS_BLF_CANCEL;
 	memset((char *)(bip->bli_format.blf_data_map), 0,
 	      (bip->bli_format.blf_map_size * sizeof(uint)));
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 	tp->t_flags |= XFS_TRANS_DIRTY;
 }
 
@@ -853,12 +815,9 @@
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 
 	bip->bli_flags |= XFS_BLI_STALE_INODE;
-	bip->bli_item.li_cb = (void(*)(xfs_buf_t*,xfs_log_item_t*))
-		xfs_buf_iodone;
+	bip->bli_item.li_cb = xfs_buf_iodone;
 }
 
-
-
 /*
  * Mark the buffer as being one which contains newly allocated
  * inodes.  We need to make sure that even if this buffer is
diff --git a/fs/xfs/xfs_trans_extfree.c b/fs/xfs/xfs_trans_extfree.c
index 27cce2a..f783d5e 100644
--- a/fs/xfs/xfs_trans_extfree.c
+++ b/fs/xfs/xfs_trans_extfree.c
@@ -23,7 +23,6 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_trans_priv.h"
 #include "xfs_extfree_item.h"
@@ -49,9 +48,8 @@
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)efip);
-
-	return (efip);
+	xfs_trans_add_item(tp, &efip->efi_item);
+	return efip;
 }
 
 /*
@@ -65,15 +63,11 @@
 			 xfs_fsblock_t		start_block,
 			 xfs_extlen_t		ext_len)
 {
-	xfs_log_item_desc_t	*lidp;
 	uint			next_extent;
 	xfs_extent_t		*extp;
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)efip);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	efip->efi_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	next_extent = efip->efi_next_extent;
 	ASSERT(next_extent < efip->efi_format.efi_nextents);
@@ -106,9 +100,8 @@
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)efdp);
-
-	return (efdp);
+	xfs_trans_add_item(tp, &efdp->efd_item);
+	return efdp;
 }
 
 /*
@@ -122,15 +115,11 @@
 			 xfs_fsblock_t		start_block,
 			 xfs_extlen_t		ext_len)
 {
-	xfs_log_item_desc_t	*lidp;
 	uint			next_extent;
 	xfs_extent_t		*extp;
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)efdp);
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	efdp->efd_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	next_extent = efdp->efd_next_extent;
 	ASSERT(next_extent < efdp->efd_format.efd_nextents);
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 785ff10..cdc53a1 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -24,20 +24,16 @@
 #include "xfs_trans.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
 #include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_btree.h"
-#include "xfs_ialloc.h"
 #include "xfs_trans_priv.h"
 #include "xfs_inode_item.h"
+#include "xfs_trace.h"
 
 #ifdef XFS_TRANS_DEBUG
 STATIC void
@@ -47,7 +43,6 @@
 #define	xfs_trans_inode_broot_debug(ip)
 #endif
 
-
 /*
  * Get an inode and join it to the transaction.
  */
@@ -62,78 +57,66 @@
 {
 	int			error;
 
-	error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp, 0);
-	if (!error && tp)
-		xfs_trans_ijoin(tp, *ipp, lock_flags);
+	error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp);
+	if (!error && tp) {
+		xfs_trans_ijoin(tp, *ipp);
+		(*ipp)->i_itemp->ili_lock_flags = lock_flags;
+	}
 	return error;
 }
 
 /*
- * Add the locked inode to the transaction.
- * The inode must be locked, and it cannot be associated with any
- * transaction.  The caller must specify the locks already held
- * on the inode.
+ * Add a locked inode to the transaction.
+ *
+ * The inode must be locked, and it cannot be associated with any transaction.
  */
 void
 xfs_trans_ijoin(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip,
-	uint		lock_flags)
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip)
 {
 	xfs_inode_log_item_t	*iip;
 
 	ASSERT(ip->i_transp == NULL);
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-	ASSERT(lock_flags & XFS_ILOCK_EXCL);
 	if (ip->i_itemp == NULL)
 		xfs_inode_item_init(ip, ip->i_mount);
 	iip = ip->i_itemp;
-	ASSERT(iip->ili_flags == 0);
+	ASSERT(iip->ili_lock_flags == 0);
 
 	/*
 	 * Get a log_item_desc to point at the new item.
 	 */
-	(void) xfs_trans_add_item(tp, (xfs_log_item_t*)(iip));
+	xfs_trans_add_item(tp, &iip->ili_item);
 
 	xfs_trans_inode_broot_debug(ip);
 
 	/*
-	 * If the IO lock is already held, mark that in the inode log item.
-	 */
-	if (lock_flags & XFS_IOLOCK_EXCL) {
-		iip->ili_flags |= XFS_ILI_IOLOCKED_EXCL;
-	} else if (lock_flags & XFS_IOLOCK_SHARED) {
-		iip->ili_flags |= XFS_ILI_IOLOCKED_SHARED;
-	}
-
-	/*
 	 * Initialize i_transp so we can find it with xfs_inode_incore()
 	 * in xfs_trans_iget() above.
 	 */
 	ip->i_transp = tp;
 }
 
-
-
 /*
- * Mark the inode as not needing to be unlocked when the inode item's
- * IOP_UNLOCK() routine is called.  The inode must already be locked
- * and associated with the given transaction.
+ * Add a locked inode to the transaction.
+ *
+ *
+ * Grabs a reference to the inode which will be dropped when the transaction
+ * is commited.  The inode will also be unlocked at that point.  The inode
+ * must be locked, and it cannot be associated with any transaction.
  */
-/*ARGSUSED*/
 void
-xfs_trans_ihold(
-	xfs_trans_t	*tp,
-	xfs_inode_t	*ip)
+xfs_trans_ijoin_ref(
+	struct xfs_trans	*tp,
+	struct xfs_inode	*ip,
+	uint			lock_flags)
 {
-	ASSERT(ip->i_transp == tp);
-	ASSERT(ip->i_itemp != NULL);
-	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-
-	ip->i_itemp->ili_flags |= XFS_ILI_HOLD;
+	xfs_trans_ijoin(tp, ip);
+	IHOLD(ip);
+	ip->i_itemp->ili_lock_flags = lock_flags;
 }
 
-
 /*
  * This is called to mark the fields indicated in fieldmask as needing
  * to be logged when the transaction is committed.  The inode must
@@ -149,17 +132,12 @@
 	xfs_inode_t	*ip,
 	uint		flags)
 {
-	xfs_log_item_desc_t	*lidp;
-
 	ASSERT(ip->i_transp == tp);
 	ASSERT(ip->i_itemp != NULL);
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
 
-	lidp = xfs_trans_find_item(tp, (xfs_log_item_t*)(ip->i_itemp));
-	ASSERT(lidp != NULL);
-
 	tp->t_flags |= XFS_TRANS_DIRTY;
-	lidp->lid_flags |= XFS_LID_DIRTY;
+	ip->i_itemp->ili_item.li_desc->lid_flags |= XFS_LID_DIRTY;
 
 	/*
 	 * Always OR in the bits from the ili_last_fields field.
diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c
deleted file mode 100644
index f11d37d..0000000
--- a/fs/xfs/xfs_trans_item.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include "xfs.h"
-#include "xfs_fs.h"
-#include "xfs_types.h"
-#include "xfs_log.h"
-#include "xfs_inum.h"
-#include "xfs_trans.h"
-#include "xfs_trans_priv.h"
-/* XXX: from here down needed until struct xfs_trans has its own ailp */
-#include "xfs_bit.h"
-#include "xfs_buf_item.h"
-#include "xfs_sb.h"
-#include "xfs_ag.h"
-#include "xfs_dir2.h"
-#include "xfs_dmapi.h"
-#include "xfs_mount.h"
-
-STATIC int	xfs_trans_unlock_chunk(xfs_log_item_chunk_t *,
-					int, int, xfs_lsn_t);
-
-/*
- * This is called to add the given log item to the transaction's
- * list of log items.  It must find a free log item descriptor
- * or allocate a new one and add the item to that descriptor.
- * The function returns a pointer to item descriptor used to point
- * to the new item.  The log item will now point to its new descriptor
- * with its li_desc field.
- */
-xfs_log_item_desc_t *
-xfs_trans_add_item(xfs_trans_t *tp, xfs_log_item_t *lip)
-{
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_chunk_t	*licp;
-	int			i=0;
-
-	/*
-	 * If there are no free descriptors, allocate a new chunk
-	 * of them and put it at the front of the chunk list.
-	 */
-	if (tp->t_items_free == 0) {
-		licp = (xfs_log_item_chunk_t*)
-		       kmem_alloc(sizeof(xfs_log_item_chunk_t), KM_SLEEP);
-		ASSERT(licp != NULL);
-		/*
-		 * Initialize the chunk, and then
-		 * claim the first slot in the newly allocated chunk.
-		 */
-		xfs_lic_init(licp);
-		xfs_lic_claim(licp, 0);
-		licp->lic_unused = 1;
-		xfs_lic_init_slot(licp, 0);
-		lidp = xfs_lic_slot(licp, 0);
-
-		/*
-		 * Link in the new chunk and update the free count.
-		 */
-		licp->lic_next = tp->t_items.lic_next;
-		tp->t_items.lic_next = licp;
-		tp->t_items_free = XFS_LIC_NUM_SLOTS - 1;
-
-		/*
-		 * Initialize the descriptor and the generic portion
-		 * of the log item.
-		 *
-		 * Point the new slot at this item and return it.
-		 * Also point the log item at its currently active
-		 * descriptor and set the item's mount pointer.
-		 */
-		lidp->lid_item = lip;
-		lidp->lid_flags = 0;
-		lidp->lid_size = 0;
-		lip->li_desc = lidp;
-		lip->li_mountp = tp->t_mountp;
-		lip->li_ailp = tp->t_mountp->m_ail;
-		return lidp;
-	}
-
-	/*
-	 * Find the free descriptor. It is somewhere in the chunklist
-	 * of descriptors.
-	 */
-	licp = &tp->t_items;
-	while (licp != NULL) {
-		if (xfs_lic_vacancy(licp)) {
-			if (licp->lic_unused <= XFS_LIC_MAX_SLOT) {
-				i = licp->lic_unused;
-				ASSERT(xfs_lic_isfree(licp, i));
-				break;
-			}
-			for (i = 0; i <= XFS_LIC_MAX_SLOT; i++) {
-				if (xfs_lic_isfree(licp, i))
-					break;
-			}
-			ASSERT(i <= XFS_LIC_MAX_SLOT);
-			break;
-		}
-		licp = licp->lic_next;
-	}
-	ASSERT(licp != NULL);
-	/*
-	 * If we find a free descriptor, claim it,
-	 * initialize it, and return it.
-	 */
-	xfs_lic_claim(licp, i);
-	if (licp->lic_unused <= i) {
-		licp->lic_unused = i + 1;
-		xfs_lic_init_slot(licp, i);
-	}
-	lidp = xfs_lic_slot(licp, i);
-	tp->t_items_free--;
-	lidp->lid_item = lip;
-	lidp->lid_flags = 0;
-	lidp->lid_size = 0;
-	lip->li_desc = lidp;
-	lip->li_mountp = tp->t_mountp;
-	lip->li_ailp = tp->t_mountp->m_ail;
-	return lidp;
-}
-
-/*
- * Free the given descriptor.
- *
- * This requires setting the bit in the chunk's free mask corresponding
- * to the given slot.
- */
-void
-xfs_trans_free_item(xfs_trans_t	*tp, xfs_log_item_desc_t *lidp)
-{
-	uint			slot;
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	**licpp;
-
-	slot = xfs_lic_desc_to_slot(lidp);
-	licp = xfs_lic_desc_to_chunk(lidp);
-	xfs_lic_relse(licp, slot);
-	lidp->lid_item->li_desc = NULL;
-	tp->t_items_free++;
-
-	/*
-	 * If there are no more used items in the chunk and this is not
-	 * the chunk embedded in the transaction structure, then free
-	 * the chunk. First pull it from the chunk list and then
-	 * free it back to the heap.  We didn't bother with a doubly
-	 * linked list here because the lists should be very short
-	 * and this is not a performance path.  It's better to save
-	 * the memory of the extra pointer.
-	 *
-	 * Also decrement the transaction structure's count of free items
-	 * by the number in a chunk since we are freeing an empty chunk.
-	 */
-	if (xfs_lic_are_all_free(licp) && (licp != &(tp->t_items))) {
-		licpp = &(tp->t_items.lic_next);
-		while (*licpp != licp) {
-			ASSERT(*licpp != NULL);
-			licpp = &((*licpp)->lic_next);
-		}
-		*licpp = licp->lic_next;
-		kmem_free(licp);
-		tp->t_items_free -= XFS_LIC_NUM_SLOTS;
-	}
-}
-
-/*
- * This is called to find the descriptor corresponding to the given
- * log item.  It returns a pointer to the descriptor.
- * The log item MUST have a corresponding descriptor in the given
- * transaction.  This routine does not return NULL, it panics.
- *
- * The descriptor pointer is kept in the log item's li_desc field.
- * Just return it.
- */
-/*ARGSUSED*/
-xfs_log_item_desc_t *
-xfs_trans_find_item(xfs_trans_t	*tp, xfs_log_item_t *lip)
-{
-	ASSERT(lip->li_desc != NULL);
-
-	return lip->li_desc;
-}
-
-
-/*
- * Return a pointer to the first descriptor in the chunk list.
- * This does not return NULL if there are none, it panics.
- *
- * The first descriptor must be in either the first or second chunk.
- * This is because the only chunk allowed to be empty is the first.
- * All others are freed when they become empty.
- *
- * At some point this and xfs_trans_next_item() should be optimized
- * to quickly look at the mask to determine if there is anything to
- * look at.
- */
-xfs_log_item_desc_t *
-xfs_trans_first_item(xfs_trans_t *tp)
-{
-	xfs_log_item_chunk_t	*licp;
-	int			i;
-
-	licp = &tp->t_items;
-	/*
-	 * If it's not in the first chunk, skip to the second.
-	 */
-	if (xfs_lic_are_all_free(licp)) {
-		licp = licp->lic_next;
-	}
-
-	/*
-	 * Return the first non-free descriptor in the chunk.
-	 */
-	ASSERT(!xfs_lic_are_all_free(licp));
-	for (i = 0; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-	cmn_err(CE_WARN, "xfs_trans_first_item() -- no first item");
-	return NULL;
-}
-
-
-/*
- * Given a descriptor, return the next descriptor in the chunk list.
- * This returns NULL if there are no more used descriptors in the list.
- *
- * We do this by first locating the chunk in which the descriptor resides,
- * and then scanning forward in the chunk and the list for the next
- * used descriptor.
- */
-/*ARGSUSED*/
-xfs_log_item_desc_t *
-xfs_trans_next_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp)
-{
-	xfs_log_item_chunk_t	*licp;
-	int			i;
-
-	licp = xfs_lic_desc_to_chunk(lidp);
-
-	/*
-	 * First search the rest of the chunk. The for loop keeps us
-	 * from referencing things beyond the end of the chunk.
-	 */
-	for (i = (int)xfs_lic_desc_to_slot(lidp) + 1; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-
-	/*
-	 * Now search the next chunk.  It must be there, because the
-	 * next chunk would have been freed if it were empty.
-	 * If there is no next chunk, return NULL.
-	 */
-	if (licp->lic_next == NULL) {
-		return NULL;
-	}
-
-	licp = licp->lic_next;
-	ASSERT(!xfs_lic_are_all_free(licp));
-	for (i = 0; i < licp->lic_unused; i++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-
-		return xfs_lic_slot(licp, i);
-	}
-	ASSERT(0);
-	/* NOTREACHED */
-	return NULL; /* keep gcc quite */
-}
-
-/*
- * This is called to unlock all of the items of a transaction and to free
- * all the descriptors of that transaction.
- *
- * It walks the list of descriptors and unlocks each item.  It frees
- * each chunk except that embedded in the transaction as it goes along.
- */
-void
-xfs_trans_free_items(
-	xfs_trans_t	*tp,
-	xfs_lsn_t	commit_lsn,
-	int		flags)
-{
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
-	int			abort;
-
-	abort = flags & XFS_TRANS_ABORT;
-	licp = &tp->t_items;
-	/*
-	 * Special case the embedded chunk so we don't free it below.
-	 */
-	if (!xfs_lic_are_all_free(licp)) {
-		(void) xfs_trans_unlock_chunk(licp, 1, abort, commit_lsn);
-		xfs_lic_all_free(licp);
-		licp->lic_unused = 0;
-	}
-	licp = licp->lic_next;
-
-	/*
-	 * Unlock each item in each chunk and free the chunks.
-	 */
-	while (licp != NULL) {
-		ASSERT(!xfs_lic_are_all_free(licp));
-		(void) xfs_trans_unlock_chunk(licp, 1, abort, commit_lsn);
-		next_licp = licp->lic_next;
-		kmem_free(licp);
-		licp = next_licp;
-	}
-
-	/*
-	 * Reset the transaction structure's free item count.
-	 */
-	tp->t_items_free = XFS_LIC_NUM_SLOTS;
-	tp->t_items.lic_next = NULL;
-}
-
-
-
-/*
- * This is called to unlock the items associated with a transaction.
- * Items which were not logged should be freed.
- * Those which were logged must still be tracked so they can be unpinned
- * when the transaction commits.
- */
-void
-xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn)
-{
-	xfs_log_item_chunk_t	*licp;
-	xfs_log_item_chunk_t	*next_licp;
-	xfs_log_item_chunk_t	**licpp;
-	int			freed;
-
-	freed = 0;
-	licp = &tp->t_items;
-
-	/*
-	 * Special case the embedded chunk so we don't free.
-	 */
-	if (!xfs_lic_are_all_free(licp)) {
-		freed = xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
-	}
-	licpp = &(tp->t_items.lic_next);
-	licp = licp->lic_next;
-
-	/*
-	 * Unlock each item in each chunk, free non-dirty descriptors,
-	 * and free empty chunks.
-	 */
-	while (licp != NULL) {
-		ASSERT(!xfs_lic_are_all_free(licp));
-		freed += xfs_trans_unlock_chunk(licp, 0, 0, commit_lsn);
-		next_licp = licp->lic_next;
-		if (xfs_lic_are_all_free(licp)) {
-			*licpp = next_licp;
-			kmem_free(licp);
-			freed -= XFS_LIC_NUM_SLOTS;
-		} else {
-			licpp = &(licp->lic_next);
-		}
-		ASSERT(*licpp == next_licp);
-		licp = next_licp;
-	}
-
-	/*
-	 * Fix the free descriptor count in the transaction.
-	 */
-	tp->t_items_free += freed;
-}
-
-/*
- * Unlock each item pointed to by a descriptor in the given chunk.
- * Stamp the commit lsn into each item if necessary.
- * Free descriptors pointing to items which are not dirty if freeing_chunk
- * is zero. If freeing_chunk is non-zero, then we need to unlock all
- * items in the chunk.
- * 
- * Return the number of descriptors freed.
- */
-STATIC int
-xfs_trans_unlock_chunk(
-	xfs_log_item_chunk_t	*licp,
-	int			freeing_chunk,
-	int			abort,
-	xfs_lsn_t		commit_lsn)
-{
-	xfs_log_item_desc_t	*lidp;
-	xfs_log_item_t		*lip;
-	int			i;
-	int			freed;
-
-	freed = 0;
-	lidp = licp->lic_descs;
-	for (i = 0; i < licp->lic_unused; i++, lidp++) {
-		if (xfs_lic_isfree(licp, i)) {
-			continue;
-		}
-		lip = lidp->lid_item;
-		lip->li_desc = NULL;
-
-		if (commit_lsn != NULLCOMMITLSN)
-			IOP_COMMITTING(lip, commit_lsn);
-		if (abort)
-			lip->li_flags |= XFS_LI_ABORTED;
-		IOP_UNLOCK(lip);
-
-		/*
-		 * Free the descriptor if the item is not dirty
-		 * within this transaction and the caller is not
-		 * going to just free the entire thing regardless.
-		 */
-		if (!(freeing_chunk) &&
-		    (!(lidp->lid_flags & XFS_LID_DIRTY) || abort)) {
-			xfs_lic_relse(licp, i);
-			freed++;
-		}
-	}
-
-	return freed;
-}
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index c6e4f2c8..e2d93d8 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -23,22 +23,8 @@
 struct xfs_mount;
 struct xfs_trans;
 
-/*
- * From xfs_trans_item.c
- */
-struct xfs_log_item_desc	*xfs_trans_add_item(struct xfs_trans *,
-					    struct xfs_log_item *);
-void				xfs_trans_free_item(struct xfs_trans *,
-					    struct xfs_log_item_desc *);
-struct xfs_log_item_desc	*xfs_trans_find_item(struct xfs_trans *,
-					     struct xfs_log_item *);
-struct xfs_log_item_desc	*xfs_trans_first_item(struct xfs_trans *);
-struct xfs_log_item_desc	*xfs_trans_next_item(struct xfs_trans *,
-					     struct xfs_log_item_desc *);
-
-void	xfs_trans_unlock_items(struct xfs_trans *tp, xfs_lsn_t commit_lsn);
-void	xfs_trans_free_items(struct xfs_trans *tp, xfs_lsn_t commit_lsn,
-				int flags);
+void	xfs_trans_add_item(struct xfs_trans *, struct xfs_log_item *);
+void	xfs_trans_del_item(struct xfs_log_item *);
 
 void	xfs_trans_item_committed(struct xfs_log_item *lip,
 				xfs_lsn_t commit_lsn, int aborted);
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 4d88616..b7d5769 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -25,18 +25,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_bmap.h"
 #include "xfs_error.h"
 #include "xfs_quota.h"
-#include "xfs_rw.h"
 #include "xfs_itable.h"
 #include "xfs_utils.h"
 
@@ -324,86 +320,3 @@
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	return 0;
 }
-
-/*
- * Try to truncate the given file to 0 length.  Currently called
- * only out of xfs_remove when it has to truncate a file to free
- * up space for the remove to proceed.
- */
-int
-xfs_truncate_file(
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip)
-{
-	xfs_trans_t	*tp;
-	int		error;
-
-#ifdef QUOTADEBUG
-	/*
-	 * This is called to truncate the quotainodes too.
-	 */
-	if (XFS_IS_UQUOTA_ON(mp)) {
-		if (ip->i_ino != mp->m_sb.sb_uquotino)
-			ASSERT(ip->i_udquot);
-	}
-	if (XFS_IS_OQUOTA_ON(mp)) {
-		if (ip->i_ino != mp->m_sb.sb_gquotino)
-			ASSERT(ip->i_gdquot);
-	}
-#endif
-	/*
-	 * Make the call to xfs_itruncate_start before starting the
-	 * transaction, because we cannot make the call while we're
-	 * in a transaction.
-	 */
-	xfs_ilock(ip, XFS_IOLOCK_EXCL);
-	error = xfs_itruncate_start(ip, XFS_ITRUNC_DEFINITE, (xfs_fsize_t)0);
-	if (error) {
-		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-		return error;
-	}
-
-	tp = xfs_trans_alloc(mp, XFS_TRANS_TRUNCATE_FILE);
-	if ((error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
-				      XFS_TRANS_PERM_LOG_RES,
-				      XFS_ITRUNCATE_LOG_COUNT))) {
-		xfs_trans_cancel(tp, 0);
-		xfs_iunlock(ip, XFS_IOLOCK_EXCL);
-		return error;
-	}
-
-	/*
-	 * Follow the normal truncate locking protocol.  Since we
-	 * hold the inode in the transaction, we know that its number
-	 * of references will stay constant.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
-	/*
-	 * Signal a sync xaction.  The only case where that isn't
-	 * the case is if we're truncating an already unlinked file
-	 * on a wsync fs.  In that case, we know the blocks can't
-	 * reappear in the file because the links to file are
-	 * permanently toast.  Currently, we're always going to
-	 * want a sync transaction because this code is being
-	 * called from places where nlink is guaranteed to be 1
-	 * but I'm leaving the tests in to protect against future
-	 * changes -- rcc.
-	 */
-	error = xfs_itruncate_finish(&tp, ip, (xfs_fsize_t)0,
-				     XFS_DATA_FORK,
-				     ((ip->i_d.di_nlink != 0 ||
-				       !(mp->m_flags & XFS_MOUNT_WSYNC))
-				      ? 1 : 0));
-	if (error) {
-		xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
-				 XFS_TRANS_ABORT);
-	} else {
-		xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
-		error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	}
-	xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-
-	return error;
-}
diff --git a/fs/xfs/xfs_utils.h b/fs/xfs/xfs_utils.h
index ef32122..f55b967 100644
--- a/fs/xfs/xfs_utils.h
+++ b/fs/xfs/xfs_utils.h
@@ -18,7 +18,6 @@
 #ifndef __XFS_UTILS_H__
 #define __XFS_UTILS_H__
 
-extern int xfs_truncate_file(xfs_mount_t *, xfs_inode_t *);
 extern int xfs_dir_ialloc(xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
 				xfs_dev_t, cred_t *, prid_t, int,
 				xfs_inode_t **, int *);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 9d376be..3ac137d 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -26,19 +26,14 @@
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_dir2.h"
-#include "xfs_dmapi.h"
 #include "xfs_mount.h"
 #include "xfs_da_btree.h"
 #include "xfs_bmap_btree.h"
-#include "xfs_alloc_btree.h"
 #include "xfs_ialloc_btree.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
 #include "xfs_dinode.h"
 #include "xfs_inode.h"
 #include "xfs_inode_item.h"
 #include "xfs_itable.h"
-#include "xfs_btree.h"
 #include "xfs_ialloc.h"
 #include "xfs_alloc.h"
 #include "xfs_bmap.h"
@@ -73,7 +68,7 @@
 	struct xfs_dquot	*udqp, *gdqp, *olddquot1, *olddquot2;
 	int			need_iolock = 1;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_setattr(ip);
 
 	if (mp->m_flags & XFS_MOUNT_RDONLY)
 		return XFS_ERROR(EROFS);
@@ -143,16 +138,6 @@
 			goto error_return;
 		}
 	} else {
-		if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
-		    !(flags & XFS_ATTR_DMI)) {
-			int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR;
-			code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip,
-				iattr->ia_size, 0, dmflags, NULL);
-			if (code) {
-				lock_flags = 0;
-				goto error_return;
-			}
-		}
 		if (need_iolock)
 			lock_flags |= XFS_IOLOCK_EXCL;
 	}
@@ -267,7 +252,7 @@
 		if (code) {
 			ASSERT(tp == NULL);
 			lock_flags &= ~XFS_ILOCK_EXCL;
-			ASSERT(lock_flags == XFS_IOLOCK_EXCL);
+			ASSERT(lock_flags == XFS_IOLOCK_EXCL || !need_iolock);
 			goto error_return;
 		}
 		tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_SIZE);
@@ -283,8 +268,7 @@
 		commit_flags = XFS_TRANS_RELEASE_LOG_RES;
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-		xfs_trans_ijoin(tp, ip, lock_flags);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Only change the c/mtime if we are changing the size
@@ -334,8 +318,7 @@
 			xfs_iflags_set(ip, XFS_ITRUNCATED);
 		}
 	} else if (tp) {
-		xfs_trans_ijoin(tp, ip, lock_flags);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	}
 
 	/*
@@ -470,17 +453,10 @@
 			return XFS_ERROR(code);
 	}
 
-	if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
-	    !(flags & XFS_ATTR_DMI)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, NULL, NULL,
-					0, 0, AT_DELAY_FLAG(flags));
-	}
 	return 0;
 
  abort_return:
 	commit_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
  error_return:
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
@@ -516,7 +492,7 @@
 	int		error = 0;
 
 	error = xfs_bmapi(NULL, ip, 0, XFS_B_TO_FSB(mp, pathlen), 0, NULL, 0,
-			mval, &nmaps, NULL, NULL);
+			mval, &nmaps, NULL);
 	if (error)
 		goto out;
 
@@ -557,7 +533,7 @@
 	int		pathlen;
 	int		error = 0;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_readlink(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -613,14 +589,14 @@
 	 */
 	end_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)ip->i_size));
 	last_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp));
-	map_len = last_fsb - end_fsb;
-	if (map_len <= 0)
+	if (last_fsb <= end_fsb)
 		return 0;
+	map_len = last_fsb - end_fsb;
 
 	nimaps = 1;
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 	error = xfs_bmapi(NULL, ip, end_fsb, map_len, 0,
-			  NULL, 0, &imap, &nimaps, NULL, NULL);
+			  NULL, 0, &imap, &nimaps, NULL);
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
 	if (!error && (nimaps != 0) &&
@@ -675,10 +651,7 @@
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip,
-				XFS_IOLOCK_EXCL |
-				XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		error = xfs_itruncate_finish(&tp, ip,
 					     ip->i_size,
@@ -750,8 +723,7 @@
 	xfs_ilock(ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
 	size = (int)ip->i_d.di_size;
 	ip->i_d.di_size = 0;
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	/*
 	 * Find the block(s) so we can inval and unmap them.
@@ -761,7 +733,7 @@
 	nmaps = ARRAY_SIZE(mval);
 	if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
 			XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
-			&free_list, NULL)))
+			&free_list)))
 		goto error0;
 	/*
 	 * Invalidate the block(s).
@@ -776,7 +748,7 @@
 	 * Unmap the dead block(s) to the free_list.
 	 */
 	if ((error = xfs_bunmapi(tp, ip, 0, size, XFS_BMAPI_METADATA, nmaps,
-			&first_block, &free_list, NULL, &done)))
+			&first_block, &free_list, &done)))
 		goto error1;
 	ASSERT(done);
 	/*
@@ -795,8 +767,7 @@
 	 * Mark it dirty so it will be logged and moved forward in the log as
 	 * part of every commit.
 	 */
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
 	/*
 	 * Get a new, empty transaction to return to our caller.
@@ -929,8 +900,7 @@
 		goto error_cancel;
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 	xfs_idestroy_fork(ip, XFS_ATTR_FORK);
 
 	ASSERT(ip->i_d.di_anextents == 0);
@@ -1035,8 +1005,6 @@
 	int		error;
 	int		truncate;
 
-	xfs_itrace_entry(ip);
-
 	/*
 	 * If the inode is already free, then there can be nothing
 	 * to clean up here.
@@ -1060,9 +1028,6 @@
 
 	mp = ip->i_mount;
 
-	if (ip->i_d.di_nlink == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_DESTROY))
-		XFS_SEND_DESTROY(mp, ip, DM_RIGHT_NULL);
-
 	error = 0;
 
 	/* If this is a read-only mount, don't do this (would generate I/O) */
@@ -1120,8 +1085,7 @@
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * normally, we have to run xfs_itruncate_finish sync.
@@ -1154,8 +1118,7 @@
 			return VN_INACTIVE_CACHE;
 		}
 
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	} else {
 		error = xfs_trans_reserve(tp, 0,
 					  XFS_IFREE_LOG_RES(mp),
@@ -1168,8 +1131,7 @@
 		}
 
 		xfs_ilock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
-		xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 	}
 
 	/*
@@ -1257,7 +1219,7 @@
 	int			error;
 	uint			lock_mode;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_lookup(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(dp->i_mount))
 		return XFS_ERROR(EIO);
@@ -1269,7 +1231,7 @@
 	if (error)
 		goto out;
 
-	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0);
+	error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp);
 	if (error)
 		goto out_free_name;
 
@@ -1309,21 +1271,11 @@
 	uint			log_res;
 	uint			log_count;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_create(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_CREATE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_CREATE,
-				dp, DM_RIGHT_NULL, NULL,
-				DM_RIGHT_NULL, name->name, NULL,
-				mode, 0, 0);
-
-		if (error)
-			return error;
-	}
-
 	if (dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT)
 		prid = dp->i_d.di_projid;
 	else
@@ -1427,8 +1379,7 @@
 	 * the transaction cancel unlocking dp so don't do it explicitly in the
 	 * error path.
 	 */
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
 	error = xfs_dir_createname(tp, dp, name, ip->i_ino,
@@ -1487,16 +1438,7 @@
 	xfs_qm_dqrele(gdqp);
 
 	*ipp = ip;
-
-	/* Fallthrough to std_return with error = 0  */
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTCREATE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_POSTCREATE, dp, DM_RIGHT_NULL,
-				ip, DM_RIGHT_NULL, name->name, NULL, mode,
-				error, 0);
-	}
-
-	return error;
+	return 0;
 
  out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
@@ -1510,8 +1452,8 @@
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-	goto std_return;
+ std_return:
+	return error;
 
  out_abort_rele:
 	/*
@@ -1726,20 +1668,11 @@
 	uint			resblks;
 	uint			log_count;
 
-	xfs_itrace_entry(dp);
-	xfs_itrace_entry(ip);
+	trace_xfs_remove(dp, name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, dp, DM_RIGHT_NULL,
-					NULL, DM_RIGHT_NULL, name->name, NULL,
-					ip->i_d.di_mode, 0, 0);
-		if (error)
-			return error;
-	}
-
 	error = xfs_qm_dqattach(dp, 0);
 	if (error)
 		goto std_return;
@@ -1782,15 +1715,8 @@
 
 	xfs_lock_two_inodes(dp, ip, XFS_ILOCK_EXCL);
 
-	/*
-	 * At this point, we've gotten both the directory and the entry
-	 * inodes locked.
-	 */
-	IHOLD(ip);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
-
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 
 	/*
 	 * If we're removing a directory perform some additional validation.
@@ -1877,21 +1803,15 @@
 	if (!is_dir && link_zero && xfs_inode_is_filestream(ip))
 		xfs_filestream_deassociate(ip);
 
- std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
-		XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL,
-				NULL, DM_RIGHT_NULL, name->name, NULL,
-				ip->i_d.di_mode, error, 0);
-	}
-
-	return error;
+	return 0;
 
  out_bmap_cancel:
 	xfs_bmap_cancel(&free_list);
 	cancel_flags |= XFS_TRANS_ABORT;
  out_trans_cancel:
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -1909,25 +1829,13 @@
 	int			committed;
 	int			resblks;
 
-	xfs_itrace_entry(tdp);
-	xfs_itrace_entry(sip);
+	trace_xfs_link(tdp, target_name);
 
 	ASSERT(!S_ISDIR(sip->i_d.di_mode));
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
 
-	if (DM_EVENT_ENABLED(tdp, DM_EVENT_LINK)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_LINK,
-					tdp, DM_RIGHT_NULL,
-					sip, DM_RIGHT_NULL,
-					target_name->name, NULL, 0, 0, 0);
-		if (error)
-			return error;
-	}
-
-	/* Return through std_return after this point. */
-
 	error = xfs_qm_dqattach(sip, 0);
 	if (error)
 		goto std_return;
@@ -1953,15 +1861,8 @@
 
 	xfs_lock_two_inodes(sip, tdp, XFS_ILOCK_EXCL);
 
-	/*
-	 * Increment vnode ref counts since xfs_trans_commit &
-	 * xfs_trans_cancel will both unlock the inodes and
-	 * decrement the associated ref counts.
-	 */
-	IHOLD(sip);
-	IHOLD(tdp);
-	xfs_trans_ijoin(tp, sip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, tdp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, sip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, tdp, XFS_ILOCK_EXCL);
 
 	/*
 	 * If the source has too many links, we can't make any more to it.
@@ -2014,27 +1915,14 @@
 		goto abort_return;
 	}
 
-	error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
-	if (error)
-		goto std_return;
-
-	/* Fall through to std_return with error = 0. */
-std_return:
-	if (DM_EVENT_ENABLED(sip, DM_EVENT_POSTLINK)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTLINK,
-				tdp, DM_RIGHT_NULL,
-				sip, DM_RIGHT_NULL,
-				target_name->name, NULL, 0, error, 0);
-	}
-	return error;
+	return xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
 
  abort_return:
 	cancel_flags |= XFS_TRANS_ABORT;
-	/* FALLTHROUGH */
-
  error_return:
 	xfs_trans_cancel(tp, cancel_flags);
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -2074,7 +1962,7 @@
 	ip = NULL;
 	tp = NULL;
 
-	xfs_itrace_entry(dp);
+	trace_xfs_symlink(dp, link_name);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2086,17 +1974,6 @@
 	if (pathlen >= MAXPATHLEN)      /* total string too long */
 		return XFS_ERROR(ENAMETOOLONG);
 
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_SYMLINK)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_SYMLINK, dp,
-					DM_RIGHT_NULL, NULL, DM_RIGHT_NULL,
-					link_name->name,
-					(unsigned char *)target_path, 0, 0, 0);
-		if (error)
-			return error;
-	}
-
-	/* Return through std_return after this point. */
-
 	udqp = gdqp = NULL;
 	if (dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT)
 		prid = dp->i_d.di_projid;
@@ -2180,8 +2057,7 @@
 	 * transaction cancel unlocking dp so don't do it explicitly in the
 	 * error path.
 	 */
-	IHOLD(dp);
-	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
 	/*
@@ -2215,7 +2091,7 @@
 		error = xfs_bmapi(tp, ip, first_fsb, fs_blocks,
 				  XFS_BMAPI_WRITE | XFS_BMAPI_METADATA,
 				  &first_block, resblks, mval, &nmaps,
-				  &free_list, NULL);
+				  &free_list);
 		if (error) {
 			goto error1;
 		}
@@ -2278,21 +2154,8 @@
 	xfs_qm_dqrele(udqp);
 	xfs_qm_dqrele(gdqp);
 
-	/* Fall through to std_return with error = 0 or errno from
-	 * xfs_trans_commit	*/
-std_return:
-	if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTSYMLINK)) {
-		(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTSYMLINK,
-					dp, DM_RIGHT_NULL,
-					error ? NULL : ip,
-					DM_RIGHT_NULL, link_name->name,
-					(unsigned char *)target_path,
-					0, error, 0);
-	}
-
-	if (!error)
-		*ipp = ip;
-	return error;
+	*ipp = ip;
+	return 0;
 
  error2:
 	IRELE(ip);
@@ -2306,8 +2169,8 @@
 
 	if (unlock_dp_on_error)
 		xfs_iunlock(dp, XFS_ILOCK_EXCL);
-
-	goto std_return;
+ std_return:
+	return error;
 }
 
 int
@@ -2333,13 +2196,12 @@
 		return error;
 	}
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 
 	ip->i_d.di_dmevmask = evmask;
 	ip->i_d.di_dmstate  = state;
 
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	IHOLD(ip);
 	error = xfs_trans_commit(tp, 0);
 
 	return error;
@@ -2390,7 +2252,7 @@
 	int			committed;
 	int			error;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_alloc_file_space(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return XFS_ERROR(EIO);
@@ -2412,25 +2274,9 @@
 	startoffset_fsb	= XFS_B_TO_FSBT(mp, offset);
 	allocatesize_fsb = XFS_B_TO_FSB(mp, count);
 
-	/*	Generate a DMAPI event if needed.	*/
-	if (alloc_type != 0 && offset < ip->i_size &&
-			(attr_flags & XFS_ATTR_DMI) == 0  &&
-			DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
-		xfs_off_t           end_dmi_offset;
-
-		end_dmi_offset = offset+len;
-		if (end_dmi_offset > ip->i_size)
-			end_dmi_offset = ip->i_size;
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, offset,
-				      end_dmi_offset - offset, 0, NULL);
-		if (error)
-			return error;
-	}
-
 	/*
 	 * Allocate file space until done or until there is an error
 	 */
-retry:
 	while (allocatesize_fsb && !error) {
 		xfs_fileoff_t	s, e;
 
@@ -2488,8 +2334,7 @@
 		if (error)
 			goto error1;
 
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * Issue the xfs_bmapi() call to allocate the blocks
@@ -2498,7 +2343,7 @@
 		error = xfs_bmapi(tp, ip, startoffset_fsb,
 				  allocatesize_fsb, bmapi_flag,
 				  &firstfsb, 0, imapp, &nimaps,
-				  &free_list, NULL);
+				  &free_list);
 		if (error) {
 			goto error0;
 		}
@@ -2527,17 +2372,6 @@
 		startoffset_fsb += allocated_fsb;
 		allocatesize_fsb -= allocated_fsb;
 	}
-dmapi_enospc_check:
-	if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) {
-		error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE,
-				ip, DM_RIGHT_NULL,
-				ip, DM_RIGHT_NULL,
-				NULL, NULL, 0, 0, 0); /* Delay flag intentionally unused */
-		if (error == 0)
-			goto retry;	/* Maybe DMAPI app. has made space */
-		/* else fall through with error from XFS_SEND_DATA */
-	}
 
 	return error;
 
@@ -2548,7 +2382,7 @@
 error1:	/* Just cancel transaction */
 	xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
-	goto dmapi_enospc_check;
+	return error;
 }
 
 /*
@@ -2598,7 +2432,7 @@
 		offset_fsb = XFS_B_TO_FSBT(mp, offset);
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, offset_fsb, 1, 0,
-			NULL, 0, &imap, &nimap, NULL, NULL);
+			NULL, 0, &imap, &nimap, NULL);
 		if (error || nimap < 1)
 			break;
 		ASSERT(imap.br_blockcount >= 1);
@@ -2661,7 +2495,6 @@
 {
 	int			committed;
 	int			done;
-	xfs_off_t		end_dmi_offset;
 	xfs_fileoff_t		endoffset_fsb;
 	int			error;
 	xfs_fsblock_t		firstfsb;
@@ -2680,7 +2513,7 @@
 
 	mp = ip->i_mount;
 
-	xfs_itrace_entry(ip);
+	trace_xfs_free_file_space(ip);
 
 	error = xfs_qm_dqattach(ip, 0);
 	if (error)
@@ -2691,19 +2524,7 @@
 		return error;
 	rt = XFS_IS_REALTIME_INODE(ip);
 	startoffset_fsb	= XFS_B_TO_FSB(mp, offset);
-	end_dmi_offset = offset + len;
-	endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset);
-
-	if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 &&
-	    DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
-		if (end_dmi_offset > ip->i_size)
-			end_dmi_offset = ip->i_size;
-		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip,
-				offset, end_dmi_offset - offset,
-				AT_DELAY_FLAG(attr_flags), NULL);
-		if (error)
-			return error;
-	}
+	endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);
 
 	if (attr_flags & XFS_ATTR_NOLOCK)
 		need_iolock = 0;
@@ -2731,7 +2552,7 @@
 	if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, startoffset_fsb,
-			1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
+			1, 0, NULL, 0, &imap, &nimap, NULL);
 		if (error)
 			goto out_unlock_iolock;
 		ASSERT(nimap == 0 || nimap == 1);
@@ -2746,7 +2567,7 @@
 		}
 		nimap = 1;
 		error = xfs_bmapi(NULL, ip, endoffset_fsb - 1,
-			1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
+			1, 0, NULL, 0, &imap, &nimap, NULL);
 		if (error)
 			goto out_unlock_iolock;
 		ASSERT(nimap == 0 || nimap == 1);
@@ -2814,8 +2635,7 @@
 		if (error)
 			goto error1;
 
-		xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-		xfs_trans_ihold(tp, ip);
+		xfs_trans_ijoin(tp, ip);
 
 		/*
 		 * issue the bunmapi() call to free the blocks
@@ -2823,7 +2643,7 @@
 		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bunmapi(tp, ip, startoffset_fsb,
 				  endoffset_fsb - startoffset_fsb,
-				  0, 2, &firstfsb, &free_list, NULL, &done);
+				  0, 2, &firstfsb, &free_list, &done);
 		if (error) {
 			goto error0;
 		}
@@ -2883,8 +2703,6 @@
 	xfs_trans_t	*tp;
 	struct iattr	iattr;
 
-	xfs_itrace_entry(ip);
-
 	if (!S_ISREG(ip->i_d.di_mode))
 		return XFS_ERROR(EINVAL);
 
@@ -2985,8 +2803,7 @@
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 
-	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-	xfs_trans_ihold(tp, ip);
+	xfs_trans_ijoin(tp, ip);
 
 	if ((attr_flags & XFS_ATTR_DMI) == 0) {
 		ip->i_d.di_mode &= ~S_ISUID;
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 5958d78..17714be 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -212,7 +212,7 @@
 	"AE_NO_GLOBAL_LOCK",
 	"AE_ABORT_METHOD",
 	"AE_SAME_HANDLER",
-	"AE_WAKE_ONLY_GPE",
+	"AE_NO_HANDLER",
 	"AE_OWNER_ID_LIMIT"
 };
 
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 0e4ab1f..1371cc9 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -69,6 +69,7 @@
 extern u32 acpi_gbl_trace_flags;
 extern u8 acpi_gbl_enable_aml_debug_object;
 extern u8 acpi_gbl_copy_dsdt_locally;
+extern u8 acpi_gbl_truncate_io_addresses;
 
 extern u32 acpi_current_gpe_count;
 extern struct acpi_table_fadt acpi_gbl_FADT;
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index bade172..d55f4a7 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -663,10 +663,11 @@
 #define ACPI_GPE_MAX                    0xFF
 #define ACPI_NUM_GPE                    256
 
-/* Actions for acpi_set_gpe */
+/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */
 
 #define ACPI_GPE_ENABLE                 0
 #define ACPI_GPE_DISABLE                1
+#define ACPI_GPE_COND_ENABLE            2
 
 /* gpe_types for acpi_enable_gpe and acpi_disable_gpe */
 
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index da565a4..a68ca8a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -48,7 +48,7 @@
 	u8 space_id;
 	u8 bit_width;
 	u8 bit_offset;
-	u8 reserved;
+	u8 access_size;
 	u64 address;
 } __attribute__ ((packed));
 
@@ -63,6 +63,7 @@
 	u32 power;
 	u32 usage;
 	u64 time;
+	u8 bm_sts_skip;
 	char desc[ACPI_CX_DESC_LEN];
 };
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 48c5299..030a954 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -63,6 +63,12 @@
 /* Align . to a 8 byte boundary equals to maximum function alignment. */
 #define ALIGN_FUNCTION()  . = ALIGN(8)
 
+/*
+ * Align to a 32 byte boundary equal to the
+ * alignment gcc 4.5 uses for a struct
+ */
+#define STRUCT_ALIGN() . = ALIGN(32)
+
 /* The actual configuration determine if the init/exit sections
  * are handled as text/data or they can be discarded (which
  * often happens at runtime)
@@ -166,7 +172,11 @@
 	LIKELY_PROFILE()		       				\
 	BRANCH_PROFILE()						\
 	TRACE_PRINTKS()							\
+									\
+	STRUCT_ALIGN();							\
 	FTRACE_EVENTS()							\
+									\
+	STRUCT_ALIGN();							\
 	TRACE_SYSCALLS()
 
 /*
@@ -435,7 +445,7 @@
  */
 #define INIT_TASK_DATA_SECTION(align)					\
 	. = ALIGN(align);						\
-	.data..init_task : {						\
+	.data..init_task :  AT(ADDR(.data..init_task) - LOAD_OFFSET) {	\
 		INIT_TASK_DATA(align)					\
 	}
 
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 3ff9fc0..5347063 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -903,6 +903,7 @@
 #define RADEON_INFO_NUM_Z_PIPES 	0x02
 #define RADEON_INFO_ACCEL_WORKING	0x03
 #define RADEON_INFO_CRTC_FROM_ID	0x04
+#define RADEON_INFO_ACCEL_WORKING2	0x05
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/include/drm/ttm/ttm_page_alloc.h b/include/drm/ttm/ttm_page_alloc.h
index 8bb4de5..1168214 100644
--- a/include/drm/ttm/ttm_page_alloc.h
+++ b/include/drm/ttm/ttm_page_alloc.h
@@ -56,10 +56,6 @@
 		   enum ttm_caching_state cstate);
 /**
  * Initialize pool allocator.
- *
- * Pool allocator is internaly reference counted so it can be initialized
- * multiple times but ttm_page_alloc_fini has to be called same number of
- * times.
  */
 int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages);
 /**
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 224a38c..ccf94dc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -253,7 +253,7 @@
 #ifdef CONFIG_PM_SLEEP
 void __init acpi_no_s4_hw_signature(void);
 void __init acpi_old_suspend_ordering(void);
-void __init acpi_s4_no_nvs(void);
+void __init acpi_nvs_nosave(void);
 #endif /* CONFIG_PM_SLEEP */
 
 struct acpi_osc_context {
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 9101ed64..09ea4a1 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -79,7 +79,6 @@
 	u32 physical;
 	bool is_bound;
 	bool is_flushed;
-	bool vmalloc_flag;
 	/* list of agp_memory mapped to the aperture */
 	struct list_head mapped_list;
 	/* DMA-mapped addresses */
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 8b10386..b0c1740 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -14,14 +14,19 @@
 #ifndef ASMARM_AMBA_H
 #define ASMARM_AMBA_H
 
+#include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/resource.h>
 
 #define AMBA_NR_IRQS	2
 
+struct clk;
+
 struct amba_device {
 	struct device		dev;
 	struct resource		res;
+	struct clk		*pclk;
 	u64			dma_mask;
 	unsigned int		periphid;
 	unsigned int		irq[AMBA_NR_IRQS];
@@ -59,6 +64,12 @@
 int amba_request_regions(struct amba_device *, const char *);
 void amba_release_regions(struct amba_device *);
 
+#define amba_pclk_enable(d)	\
+	(IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
+
+#define amba_pclk_disable(d)	\
+	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
+
 #define amba_config(d)	(((d)->periphid >> 24) & 0xff)
 #define amba_rev(d)	(((d)->periphid >> 20) & 0x0f)
 #define amba_manf(d)	(((d)->periphid >> 12) & 0xff)
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 7e466fe..ca84ce7 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -15,9 +15,10 @@
  * @ocr_mask: available voltages on the 4 pins from the block, this
  * is ignored if a regulator is used, see the MMC_VDD_* masks in
  * mmc/host.h
- * @translate_vdd: a callback function to translate a MMC_VDD_*
- * mask into a value to be binary or:ed and written into the
- * MMCIPWR register of the block
+ * @vdd_handler: a callback function to translate a MMC_VDD_*
+ * mask into a value to be binary (or set some other custom bits
+ * in MMCIPWR) or:ed and written into the MMCIPWR register of the
+ * block.  May also control external power based on the power_mode.
  * @status: if no GPIO read function was given to the block in
  * gpio_wp (below) this function will be called to determine
  * whether a card is present in the MMC slot or not
@@ -29,7 +30,8 @@
 struct mmci_platform_data {
 	unsigned int f_max;
 	unsigned int ocr_mask;
-	u32 (*translate_vdd)(struct device *, unsigned int);
+	u32 (*vdd_handler)(struct device *, unsigned int vdd,
+			   unsigned char power_mode);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 5a5a7fd..e1b634b 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -38,10 +38,12 @@
 #define UART01x_FR		0x18	/* Flag register (Read only). */
 #define UART010_IIR		0x1C	/* Interrupt indentification register (Read). */
 #define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
+#define ST_UART011_LCRH_RX	0x1C    /* Rx line control register. */
 #define UART01x_ILPR		0x20	/* IrDA low power counter register. */
 #define UART011_IBRD		0x24	/* Integer baud rate divisor register. */
 #define UART011_FBRD		0x28	/* Fractional baud rate divisor register. */
 #define UART011_LCRH		0x2c	/* Line control register. */
+#define ST_UART011_LCRH_TX	0x2c    /* Tx Line control register. */
 #define UART011_CR		0x30	/* Control register. */
 #define UART011_IFLS		0x34	/* Interrupt fifo level select. */
 #define UART011_IMSC		0x38	/* Interrupt mask. */
@@ -84,6 +86,7 @@
 #define UART010_CR_TIE 		0x0020
 #define UART010_CR_RIE 		0x0010
 #define UART010_CR_MSIE		0x0008
+#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
 #define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
 #define UART01x_CR_SIREN	0x0002	/* SIR enable */
 #define UART01x_CR_UARTEN	0x0001	/* UART enable */
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index e6e0cb5..e9aec0d 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -82,8 +82,6 @@
 	struct bdi_writeback wb;  /* default writeback info for this bdi */
 	spinlock_t wb_lock;	  /* protects update side of wb_list */
 	struct list_head wb_list; /* the flusher threads hanging off this bdi */
-	unsigned long wb_mask;	  /* bitmask of registered tasks */
-	unsigned int wb_cnt;	  /* number of registered tasks */
 
 	struct list_head work_list;
 
@@ -105,8 +103,8 @@
 int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
 void bdi_unregister(struct backing_dev_info *bdi);
 int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
-				long nr_pages, int sb_locked);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_background_writeback(struct backing_dev_info *bdi);
 int bdi_writeback_task(struct bdi_writeback *wb);
 int bdi_has_dirty_io(struct backing_dev_info *bdi);
 void bdi_arm_supers_timer(void);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8b7f5e0..09a8402 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1211,14 +1211,23 @@
 int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
 
 #ifdef CONFIG_BLK_CGROUP
+/*
+ * This should not be using sched_clock(). A real patch is in progress
+ * to fix this up, until that is in place we need to disable preemption
+ * around sched_clock() in this function and set_io_start_time_ns().
+ */
 static inline void set_start_time_ns(struct request *req)
 {
+	preempt_disable();
 	req->start_time_ns = sched_clock();
+	preempt_enable();
 }
 
 static inline void set_io_start_time_ns(struct request *req)
 {
+	preempt_disable();
 	req->io_start_time_ns = sched_clock();
+	preempt_enable();
 }
 
 static inline uint64_t rq_start_time_ns(struct request *req)
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 39e5ff5..90012b9 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -49,9 +49,6 @@
 } __user *cap_user_data_t;
 
 
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
 #define VFS_CAP_REVISION_MASK	0xFF000000
 #define VFS_CAP_REVISION_SHIFT	24
 #define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 0c62160..e3d00fd 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -525,13 +525,21 @@
 	return cgrp->subsys[subsys_id];
 }
 
-static inline struct cgroup_subsys_state *task_subsys_state(
-	struct task_struct *task, int subsys_id)
+/*
+ * function to get the cgroup_subsys_state which allows for extra
+ * rcu_dereference_check() conditions, such as locks used during the
+ * cgroup_subsys::attach() methods.
+ */
+#define task_subsys_state_check(task, subsys_id, __c)			\
+	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
+			      rcu_read_lock_held() ||			\
+			      lockdep_is_held(&task->alloc_lock) ||	\
+			      cgroup_lock_is_held() || (__c))
+
+static inline struct cgroup_subsys_state *
+task_subsys_state(struct task_struct *task, int subsys_id)
 {
-	return rcu_dereference_check(task->cgroups->subsys[subsys_id],
-				     rcu_read_lock_held() ||
-				     lockdep_is_held(&task->alloc_lock) ||
-				     cgroup_lock_is_held());
+	return task_subsys_state_check(task, subsys_id, false);
 }
 
 static inline struct cgroup* task_cgroup(struct task_struct *task,
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 73dcf80..0da5b18 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -58,8 +58,12 @@
  * naked functions because then mcount is called without stack and frame pointer
  * being set up and there is no chance to restore the lr register to the value
  * before mcount was called.
+ *
+ * The asm() bodies of naked functions often depend on standard calling conventions,
+ * therefore they must be noinline and noclone.  GCC 4.[56] currently fail to enforce
+ * this, so we must do so ourselves.  See GCC PR44290.
  */
-#define __naked				__attribute__((naked)) notrace
+#define __naked				__attribute__((naked)) noinline __noclone notrace
 
 #define __noreturn			__attribute__((noreturn))
 
@@ -85,3 +89,7 @@
 #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
 #define gcc_header(x) _gcc_header(x)
 #include gcc_header(__GNUC__)
+
+#if !defined(__noclone)
+#define __noclone	/* not needed */
+#endif
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 94dea3f..fcfa5b9 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -48,6 +48,10 @@
  * unreleased.  Really, we need to have autoconf for the kernel.
  */
 #define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone	__attribute__((__noclone__))
+
 #endif
 
 #endif
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 75c0fa8..4d2c395 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -153,6 +153,7 @@
 extern void __put_cred(struct cred *);
 extern void exit_creds(struct task_struct *);
 extern int copy_creds(struct task_struct *, unsigned long);
+extern const struct cred *get_task_cred(struct task_struct *);
 extern struct cred *cred_alloc_blank(void);
 extern struct cred *prepare_creds(void);
 extern struct cred *prepare_exec_creds(void);
@@ -273,33 +274,18 @@
  * @task: The task to query
  *
  * Access the objective credentials of a task.  The caller must hold the RCU
- * readlock.
+ * readlock or the task must be dead and unable to change its own credentials.
  *
- * The caller must make sure task doesn't go away, either by holding a ref on
- * task or by holding tasklist_lock to prevent it from being unlinked.
+ * The result of this function should not be passed directly to get_cred();
+ * rather get_task_cred() should be used instead.
  */
-#define __task_cred(task) \
-	((const struct cred *)(rcu_dereference_check((task)->real_cred, rcu_read_lock_held() || lockdep_tasklist_lock_is_held())))
-
-/**
- * get_task_cred - Get another task's objective credentials
- * @task: The task to query
- *
- * Get the objective credentials of a task, pinning them so that they can't go
- * away.  Accessing a task's credentials directly is not permitted.
- *
- * The caller must make sure task doesn't go away, either by holding a ref on
- * task or by holding tasklist_lock to prevent it from being unlinked.
- */
-#define get_task_cred(task)				\
-({							\
-	struct cred *__cred;				\
-	rcu_read_lock();				\
-	__cred = (struct cred *) __task_cred((task));	\
-	get_cred(__cred);				\
-	rcu_read_unlock();				\
-	__cred;						\
-})
+#define __task_cred(task)						\
+	({								\
+		const struct task_struct *__t = (task);			\
+		rcu_dereference_check(__t->real_cred,			\
+				      rcu_read_lock_held() ||		\
+				      task_is_dead(__t));		\
+	})
 
 /**
  * get_current_cred - Get the current task's subjective credentials
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index 6853052..b8d2516 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
 
 
 extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.8rc1"
+#define REL_VERSION "8.3.8"
 #define API_VERSION 88
 #define PRO_VERSION_MIN 86
 #define PRO_VERSION_MAX 94
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index b3cd4de..52c0da4 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -40,7 +40,7 @@
 				const char *modname);
 
 #if defined(CONFIG_DYNAMIC_DEBUG)
-extern int ddebug_remove_module(char *mod_name);
+extern int ddebug_remove_module(const char *mod_name);
 
 #define __dynamic_dbg_enabled(dd)  ({	     \
 	int __ret = 0;							     \
@@ -73,7 +73,7 @@
 
 #else
 
-static inline int ddebug_remove_module(char *mod)
+static inline int ddebug_remove_module(const char *mod)
 {
 	return 0;
 }
diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h
new file mode 100644
index 0000000..f974fc0
--- /dev/null
+++ b/include/linux/edac_mce.h
@@ -0,0 +1,31 @@
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#if defined(CONFIG_EDAC_MCE) || \
+			(defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
+
+#include <asm/mce.h>
+#include <linux/list.h>
+
+struct edac_mce {
+	struct list_head list;
+
+	void *priv;
+	int (*check_error)(void *priv, struct mce *mce);
+};
+
+int edac_mce_register(struct edac_mce *edac_mce);
+void edac_mce_unregister(struct edac_mce *edac_mce);
+int edac_mce_parse(struct mce *mce);
+
+#else
+#define edac_mce_parse(mce) (0)
+#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 276b40a..b4207ca 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -379,6 +379,8 @@
 	__u32				flow_type;
 	/* The rx flow hash value or the rule DB size */
 	__u64				data;
+	/* The following fields are not valid and must not be used for
+	 * the ETHTOOL_{G,X}RXFH commands. */
 	struct ethtool_rx_flow_spec	fs;
 	__u32				rule_cnt;
 	__u32				rule_locs[0];
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 907ace3..e7445df 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -786,8 +786,6 @@
 #define FBINFO_MISC_USEREVENT          0x10000 /* event request
 						  from userspace */
 #define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
-#define FBINFO_MISC_FIRMWARE           0x40000 /* a replaceable firmware
-						  inited framebuffer */
 
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
@@ -801,6 +799,8 @@
  */
 #define FBINFO_MISC_ALWAYS_SETPAR   0x40000
 
+/* where the fb is a firmware driver, and can be replaced with a proper one */
+#define FBINFO_MISC_FIRMWARE        0x80000
 /*
  * Host and GPU endianness differ.
  */
@@ -873,6 +873,8 @@
 static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
 	struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
 			+ max_num * sizeof(struct aperture), GFP_KERNEL);
+	if (!a)
+		return NULL;
 	a->count = max_num;
 	return a;
 }
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index 013dc52..d147461 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -61,7 +61,8 @@
 	(rcu_dereference_check((fdtfd), \
 			       rcu_read_lock_held() || \
 			       lockdep_is_held(&(files)->file_lock) || \
-			       atomic_read(&(files)->count) == 1))
+			       atomic_read(&(files)->count) == 1 || \
+			       rcu_my_thread_group_empty()))
 
 #define files_fdtable(files) \
 		(rcu_dereference_check_fdtable((files), (files)->fdt))
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3428393..e5106e4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -53,6 +53,7 @@
 #define MAY_APPEND 8
 #define MAY_ACCESS 16
 #define MAY_OPEN 32
+#define MAY_CHDIR 64
 
 /*
  * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
@@ -415,7 +416,8 @@
 typedef int (get_block_t)(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create);
 typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
-			ssize_t bytes, void *private);
+			ssize_t bytes, void *private, int ret,
+			bool is_async);
 
 /*
  * Attribute flags.  These should be or-ed together to figure out what
@@ -1783,6 +1785,19 @@
 	struct vfsmount *mnt);
 extern void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
 
+static inline void sb_mark_dirty(struct super_block *sb)
+{
+	sb->s_dirt = 1;
+}
+static inline void sb_mark_clean(struct super_block *sb)
+{
+	sb->s_dirt = 0;
+}
+static inline int sb_is_dirty(struct super_block *sb)
+{
+	return sb->s_dirt;
+}
+
 /* Alas, no aliases. Too much hassle with bringing module.h everywhere */
 #define fops_get(fops) \
 	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
@@ -2388,7 +2403,7 @@
 extern const struct inode_operations simple_dir_inode_operations;
 struct tree_descr { char *name; const struct file_operations *ops; int mode; };
 struct dentry *d_alloc_name(struct dentry *, const char *);
-extern int simple_fill_super(struct super_block *, int, struct tree_descr *);
+extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
 extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
 extern void simple_release_fs(struct vfsmount **mount, int *count);
 
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 9bf6870..a986ff5 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -46,31 +46,31 @@
 
 #else
 
-void i8042_lock_chip(void)
+static inline void i8042_lock_chip(void)
 {
 }
 
-void i8042_unlock_chip(void)
+static inline void i8042_unlock_chip(void)
 {
 }
 
-int i8042_command(unsigned char *param, int command)
+static inline int i8042_command(unsigned char *param, int command)
 {
 	return -ENODEV;
 }
 
-bool i8042_check_port_owner(const struct serio *serio)
+static inline bool i8042_check_port_owner(const struct serio *serio)
 {
 	return false;
 }
 
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio))
 {
 	return -ENODEV;
 }
 
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
 				       struct serio *serio))
 {
 	return -ENODEV;
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 9ea047a..1ffaeff 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -67,6 +67,8 @@
 	}
 }
 
+extern void macvlan_common_setup(struct net_device *dev);
+
 extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
 				  struct nlattr *tb[], struct nlattr *data[],
 				  int (*receive)(struct sk_buff *skb),
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index a0bb301..64d5291 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -7,7 +7,6 @@
 struct cfq_queue;
 struct cfq_io_context {
 	void *key;
-	unsigned long dead_key;
 
 	struct cfq_queue *cfqq[2];
 
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index a4d2e9f..adf832d 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1026,11 +1026,12 @@
 
 struct jbd2_buffer_trigger_type {
 	/*
-	 * Fired just before a buffer is written to the journal.
-	 * mapped_data is a mapped buffer that is the frozen data for
-	 * commit.
+	 * Fired a the moment data to write to the journal are known to be
+	 * stable - so either at the moment b_frozen_data is created or just
+	 * before a buffer is written to the journal.  mapped_data is a mapped
+	 * buffer that is the frozen data for commit.
 	 */
-	void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+	void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
 			 struct buffer_head *bh, void *mapped_data,
 			 size_t size);
 
@@ -1042,7 +1043,7 @@
 			struct buffer_head *bh);
 };
 
-extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
 				       void *mapped_data,
 				       struct jbd2_buffer_trigger_type *triggers);
 extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/include/linux/list.h b/include/linux/list.h
index 8392884..5d57a3a 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -544,6 +544,21 @@
 	     &pos->member != (head); 					\
 	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
 
+/**
+ * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
+ * @pos:	the loop cursor used in the list_for_each_entry_safe loop
+ * @n:		temporary storage used in list_for_each_entry_safe
+ * @member:	the name of the list_struct within the struct.
+ *
+ * list_safe_reset_next is not safe to use in general if the list may be
+ * modified concurrently (eg. the lock is dropped in the loop body). An
+ * exception to this is if the cursor element (pos) is pinned in the list,
+ * and list_safe_reset_next is called after re-taking the lock and before
+ * completing the current iteration of the loop body.
+ */
+#define list_safe_reset_next(pos, n, member)				\
+	n = list_entry(pos->member.next, typeof(*pos), member)
+
 /*
  * Double linked lists with a single pointer list head.
  * Mostly useful for hash tables where the two pointer list head is
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
deleted file mode 100644
index f3d1433..0000000
--- a/include/linux/lmb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_LMB_H
-#define _LINUX_LMB_H
-#ifdef __KERNEL__
-
-/*
- * Logical memory blocks.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#define MAX_LMB_REGIONS 128
-
-struct lmb_property {
-	u64 base;
-	u64 size;
-};
-
-struct lmb_region {
-	unsigned long cnt;
-	u64 size;
-	struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
-	unsigned long debug;
-	u64 rmo_size;
-	struct lmb_region memory;
-	struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long lmb_add(u64 base, u64 size);
-extern long lmb_remove(u64 base, u64 size);
-extern long __init lmb_free(u64 base, u64 size);
-extern long __init lmb_reserve(u64 base, u64 size);
-extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
-				u64 (*nid_range)(u64, u64, int *));
-extern u64 __init lmb_alloc(u64 size, u64 align);
-extern u64 __init lmb_alloc_base(u64 size,
-		u64, u64 max_addr);
-extern u64 __init __lmb_alloc_base(u64 size,
-		u64 align, u64 max_addr);
-extern u64 __init lmb_phys_mem_size(void);
-extern u64 lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(u64 memory_limit);
-extern int __init lmb_is_reserved(u64 addr);
-extern int lmb_is_region_reserved(u64 base, u64 size);
-extern int lmb_find(struct lmb_property *res);
-
-extern void lmb_dump_all(void);
-
-static inline u64
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].size;
-}
-static inline u64
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline u64
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline u64
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
-	return lmb_start_pfn(type, region_nr) +
-	       lmb_size_pages(type, region_nr);
-}
-
-#include <asm/lmb.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_LMB_H */
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index 6907251..112a550 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -90,10 +90,42 @@
 			u32 requested;
 			u32 audited;
 			u32 denied;
+			/*
+			 * auditdeny is a bit tricky and unintuitive.  See the
+			 * comments in avc.c for it's meaning and usage.
+			 */
+			u32 auditdeny;
 			struct av_decision *avd;
 			int result;
 		} selinux_audit_data;
 #endif
+#ifdef CONFIG_SECURITY_APPARMOR
+		struct {
+			int error;
+			int op;
+			int type;
+			void *profile;
+			const char *name;
+			const char *info;
+			union {
+				void *target;
+				struct {
+					long pos;
+					void *target;
+				} iface;
+				struct {
+					int rlim;
+					unsigned long max;
+				} rlim;
+				struct {
+					const char *target;
+					u32 request;
+					u32 denied;
+					uid_t ouid;
+				} fs;
+			};
+		} apparmor_audit_data;
+#endif
 	};
 	/* these callback will be implemented by a specific LSM */
 	void (*lsm_pre_audit)(struct audit_buffer *, void *);
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
new file mode 100644
index 0000000..2ed4fb8
--- /dev/null
+++ b/include/linux/marvell_phy.h
@@ -0,0 +1,20 @@
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK		0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101		0x01410c60
+#define MARVELL_PHY_ID_88E1112		0x01410c90
+#define MARVELL_PHY_ID_88E1111		0x01410cc0
+#define MARVELL_PHY_ID_88E1118		0x01410e10
+#define MARVELL_PHY_ID_88E1121R		0x01410cb0
+#define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1240		0x01410e30
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
+
+#endif /* _MARVELL_PHY_H */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
new file mode 100644
index 0000000..a59faf2
--- /dev/null
+++ b/include/linux/memblock.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_MEMBLOCK_H
+#define _LINUX_MEMBLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_MEMBLOCK_REGIONS 128
+
+struct memblock_property {
+	u64 base;
+	u64 size;
+};
+
+struct memblock_region {
+	unsigned long cnt;
+	u64 size;
+	struct memblock_property region[MAX_MEMBLOCK_REGIONS+1];
+};
+
+struct memblock {
+	unsigned long debug;
+	u64 rmo_size;
+	struct memblock_region memory;
+	struct memblock_region reserved;
+};
+
+extern struct memblock memblock;
+
+extern void __init memblock_init(void);
+extern void __init memblock_analyze(void);
+extern long memblock_add(u64 base, u64 size);
+extern long memblock_remove(u64 base, u64 size);
+extern long __init memblock_free(u64 base, u64 size);
+extern long __init memblock_reserve(u64 base, u64 size);
+extern u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+				u64 (*nid_range)(u64, u64, int *));
+extern u64 __init memblock_alloc(u64 size, u64 align);
+extern u64 __init memblock_alloc_base(u64 size,
+		u64, u64 max_addr);
+extern u64 __init __memblock_alloc_base(u64 size,
+		u64 align, u64 max_addr);
+extern u64 __init memblock_phys_mem_size(void);
+extern u64 memblock_end_of_DRAM(void);
+extern void __init memblock_enforce_memory_limit(u64 memory_limit);
+extern int __init memblock_is_reserved(u64 addr);
+extern int memblock_is_region_reserved(u64 base, u64 size);
+extern int memblock_find(struct memblock_property *res);
+
+extern void memblock_dump_all(void);
+
+static inline u64
+memblock_size_bytes(struct memblock_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].size;
+}
+static inline u64
+memblock_size_pages(struct memblock_region *type, unsigned long region_nr)
+{
+	return memblock_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+memblock_start_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+	return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+memblock_end_pfn(struct memblock_region *type, unsigned long region_nr)
+{
+	return memblock_start_pfn(type, region_nr) +
+	       memblock_size_pages(type, region_nr);
+}
+
+#include <asm/memblock.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MEMBLOCK_H */
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index b631c46..f6c9b7d 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -3,6 +3,12 @@
 #include <linux/module.h>
 #include <linux/major.h>
 
+/*
+ *	These allocations are managed by device@lanana.org. If you use an
+ *	entry that is not in assigned your entry may well be moved and
+ *	reassigned, or set dynamic if a fixed value is not justified.
+ */
+
 #define PSMOUSE_MINOR		1
 #define MS_BUSMOUSE_MINOR	2
 #define ATIXL_BUSMOUSE_MINOR	3
@@ -30,7 +36,6 @@
 #define HPET_MINOR		228
 #define FUSE_MINOR		229
 #define KVM_MINOR		232
-#define VHOST_NET_MINOR		233
 #define BTRFS_MINOR		234
 #define AUTOFS_MINOR		235
 #define MISC_DYNAMIC_MINOR	255
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b969efb..a2b4804 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -999,7 +999,7 @@
  * querying the cache size, so a fastpath for that case is appropriate.
  */
 struct shrinker {
-	int (*shrink)(int nr_to_scan, gfp_t gfp_mask);
+	int (*shrink)(struct shrinker *, int nr_to_scan, gfp_t gfp_mask);
 	int seeks;	/* seeks to recreate an obj */
 
 	/* These are for internal use */
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index aafe832..d4a2ebb 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -14,6 +14,9 @@
 #ifndef __SH_MMCIF_H__
 #define __SH_MMCIF_H__
 
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
 /*
  * MMCIF : CE_CLK_CTRL [19:16]
  * 1000 : Peripheral clock / 512
@@ -36,4 +39,162 @@
 	u32	ocr;
 };
 
+#define MMCIF_CE_CMD_SET	0x00000000
+#define MMCIF_CE_ARG		0x00000008
+#define MMCIF_CE_ARG_CMD12	0x0000000C
+#define MMCIF_CE_CMD_CTRL	0x00000010
+#define MMCIF_CE_BLOCK_SET	0x00000014
+#define MMCIF_CE_CLK_CTRL	0x00000018
+#define MMCIF_CE_BUF_ACC	0x0000001C
+#define MMCIF_CE_RESP3		0x00000020
+#define MMCIF_CE_RESP2		0x00000024
+#define MMCIF_CE_RESP1		0x00000028
+#define MMCIF_CE_RESP0		0x0000002C
+#define MMCIF_CE_RESP_CMD12	0x00000030
+#define MMCIF_CE_DATA		0x00000034
+#define MMCIF_CE_INT		0x00000040
+#define MMCIF_CE_INT_MASK	0x00000044
+#define MMCIF_CE_HOST_STS1	0x00000048
+#define MMCIF_CE_HOST_STS2	0x0000004C
+#define MMCIF_CE_VERSION	0x0000007C
+
+extern inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+	return readl(addr + reg);
+}
+
+extern inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+	writel(val, addr + reg);
+}
+
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+extern inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+					  unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+extern inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+	unsigned long tmp;
+	int cnt;
+
+	for (cnt = 0; cnt < 1000000; cnt++) {
+		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+		if (tmp & mask) {
+			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+extern inline int sh_mmcif_boot_cmd(void __iomem *base,
+				    unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_boot_cmd_send(base, cmd, arg);
+	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+extern inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+					       unsigned int block_nr,
+					       unsigned long *buf)
+{
+	int k;
+
+	/* CMD13 - Status */
+	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+		return -1;
+
+	/* CMD17 - Read */
+	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+		return -1;
+
+	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+	return 0;
+}
+
+extern inline int sh_mmcif_boot_do_read(void __iomem *base,
+					unsigned long first_block,
+					unsigned long nr_blocks,
+					void *buf)
+{
+	unsigned long k;
+	int ret = 0;
+
+	/* CMD16 - Set the block size */
+	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+	for (k = 0; !ret && k < nr_blocks; k++)
+		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+						   buf + (k * SH_MMCIF_BBS));
+
+	return ret;
+}
+
+extern inline void sh_mmcif_boot_init(void __iomem *base)
+{
+	unsigned long tmp;
+
+	/* reset */
+	tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+
+	/* byte swap */
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+
+	/* Set block size in MMCIF hardware */
+	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+
+	/* CMD0 */
+	sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+	/* CMD1 - Get OCR */
+	do {
+		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+		 != 0x80000000);
+
+	/* CMD2 - Get CID */
+	sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+	/* CMD3 - Set card relative address */
+	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+extern inline void sh_mmcif_boot_slurp(void __iomem *base,
+				       unsigned char *buf,
+				       unsigned long no_bytes)
+{
+	unsigned long tmp;
+
+	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+
+	/* CMD9 - Get CSD */
+	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+	/* CMD7 - Select the card */
+	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+	tmp = no_bytes / SH_MMCIF_BBS;
+	tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0;
+
+	sh_mmcif_boot_do_read(base, 512, tmp, buf);
+}
+
 #endif /* __SH_MMCIF_H__ */
diff --git a/include/linux/module.h b/include/linux/module.h
index 6914fca..8a6b9fd 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -181,6 +181,13 @@
 void *__symbol_get_gpl(const char *symbol);
 #define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
 
+/* modules using other modules: kdb wants to see this. */
+struct module_use {
+	struct list_head source_list;
+	struct list_head target_list;
+	struct module *source, *target;
+};
+
 #ifndef __GENKSYMS__
 #ifdef CONFIG_MODVERSIONS
 /* Mark the CRC weak since genksyms apparently decides not to
@@ -359,7 +366,9 @@
 
 #ifdef CONFIG_MODULE_UNLOAD
 	/* What modules depend on me? */
-	struct list_head modules_which_use_me;
+	struct list_head source_list;
+	/* What modules do I depend on? */
+	struct list_head target_list;
 
 	/* Who is waiting for us to be unloaded */
 	struct task_struct *waiter;
@@ -663,43 +672,10 @@
 
 #endif /* CONFIG_MODULES */
 
-struct device_driver;
 #ifdef CONFIG_SYSFS
-struct module;
-
 extern struct kset *module_kset;
 extern struct kobj_type module_ktype;
 extern int module_sysfs_initialized;
-
-int mod_sysfs_init(struct module *mod);
-int mod_sysfs_setup(struct module *mod,
-			   struct kernel_param *kparam,
-			   unsigned int num_params);
-int module_add_modinfo_attrs(struct module *mod);
-void module_remove_modinfo_attrs(struct module *mod);
-
-#else /* !CONFIG_SYSFS */
-
-static inline int mod_sysfs_init(struct module *mod)
-{
-	return 0;
-}
-
-static inline int mod_sysfs_setup(struct module *mod,
-			   struct kernel_param *kparam,
-			   unsigned int num_params)
-{
-	return 0;
-}
-
-static inline int module_add_modinfo_attrs(struct module *mod)
-{
-	return 0;
-}
-
-static inline void module_remove_modinfo_attrs(struct module *mod)
-{ }
-
 #endif /* CONFIG_SYSFS */
 
 #define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index cbbbe9b..30b0c4e 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -19,6 +19,11 @@
 	struct mbus_dram_target_info	*dram;
 	struct platform_device	*shared_smi;
 	unsigned int		t_clk;
+	/*
+	 * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
+	 * limit of 9KiB will be used.
+	 */
+	int			tx_csum_limit;
 };
 
 #define MV643XX_ETH_PHY_ADDR_DEFAULT	0
diff --git a/include/linux/net.h b/include/linux/net.h
index 2b4deee..dee0b11 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -129,10 +129,9 @@
  *  @type: socket type (%SOCK_STREAM, etc)
  *  @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
  *  @ops: protocol specific socket operations
- *  @fasync_list: Asynchronous wake up list
  *  @file: File back pointer for gc
  *  @sk: internal networking protocol agnostic socket representation
- *  @wait: wait queue for several uses
+ *  @wq: wait queue for several uses
  */
 struct socket {
 	socket_state		state;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 40291f3..b21e405 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1656,6 +1656,9 @@
 	return (dev->num_tx_queues > 1);
 }
 
+extern void netif_set_real_num_tx_queues(struct net_device *dev,
+					 unsigned int txq);
+
 /* Use this variant when it is known for sure that it
  * is executing from hardware interrupt context or with hardware interrupts
  * disabled.
@@ -2329,7 +2332,7 @@
 #endif
 
 #if defined(VERBOSE_DEBUG)
-#define netif_vdbg	netdev_dbg
+#define netif_vdbg	netif_dbg
 #else
 #define netif_vdbg(priv, type, dev, format, args...)		\
 ({								\
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 77c2ae5..bad4d12 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -493,8 +493,15 @@
 extern int nfs_wb_page(struct inode *inode, struct page* page);
 extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
 #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+extern int  nfs_commit_inode(struct inode *, int);
 extern struct nfs_write_data *nfs_commitdata_alloc(void);
 extern void nfs_commit_free(struct nfs_write_data *wdata);
+#else
+static inline int
+nfs_commit_inode(struct inode *inode, int how)
+{
+	return 0;
+}
 #endif
 
 static inline int
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 9bdd914..7e4cd61 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -253,7 +253,7 @@
 /* in arch/arm/plat-omap/fb.c */
 extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
 extern void omapfb_set_ctrl_platform_data(void *pdata);
-extern void omapfb_reserve_sdram(void);
+extern void omapfb_reserve_sdram_memblock(void);
 
 #endif
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6a471ab..f26fda76b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -288,6 +288,7 @@
 	 */
 	unsigned int	irq;
 	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+	resource_size_t	fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
 
 	/* These fields are used by common fixups */
 	unsigned int	transparent:1;	/* Transparent PCI bridge */
@@ -632,6 +633,7 @@
 
 /* Generic PCI functions used internally */
 
+void pcibios_scan_specific_bus(int busn);
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
 void pci_bus_add_devices(const struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae66851..3bedcc1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1261,6 +1261,7 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
@@ -2321,6 +2322,7 @@
 #define PCI_VENDOR_ID_JMICRON		0x197B
 #define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
 #define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
 #define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
 #define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
@@ -2532,11 +2534,63 @@
 #define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
 #define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
 #define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 1261208..eec3bae 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -12,7 +12,7 @@
 
 extern int		register_exec_domain(struct exec_domain *);
 extern int		unregister_exec_domain(struct exec_domain *);
-extern int		__set_personality(unsigned long);
+extern int		__set_personality(unsigned int);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 16de393..4457969 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -139,7 +139,9 @@
 void pipe_unlock(struct pipe_inode_info *);
 void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
 
-extern unsigned int pipe_max_pages;
+extern unsigned int pipe_max_size, pipe_min_size;
+int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+
 
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe);
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index fe1872e..7066acb 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -110,7 +110,6 @@
 struct rb_root
 {
 	struct rb_node *rb_node;
-	void (*augment_cb)(struct rb_node *node);
 };
 
 
@@ -130,9 +129,7 @@
 	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
 }
 
-#define RB_ROOT	(struct rb_root) { NULL, NULL, }
-#define RB_AUGMENT_ROOT(x)	(struct rb_root) { NULL, x}
-
+#define RB_ROOT	(struct rb_root) { NULL, }
 #define	rb_entry(ptr, type, member) container_of(ptr, type, member)
 
 #define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
@@ -142,6 +139,14 @@
 extern void rb_insert_color(struct rb_node *, struct rb_root *);
 extern void rb_erase(struct rb_node *, struct rb_root *);
 
+typedef void (*rb_augment_f)(struct rb_node *node, void *data);
+
+extern void rb_augment_insert(struct rb_node *node,
+			      rb_augment_f func, void *data);
+extern struct rb_node *rb_augment_erase_begin(struct rb_node *node);
+extern void rb_augment_erase_end(struct rb_node *node,
+				 rb_augment_f func, void *data);
+
 /* Find logical next and previous nodes in a tree */
 extern struct rb_node *rb_next(const struct rb_node *);
 extern struct rb_node *rb_prev(const struct rb_node *);
diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644
index 0000000..4892f59
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h  --  Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ *	output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+	bool defdcdc_default;
+};
+
+#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index f118809..0478888 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -139,7 +139,7 @@
 extern unsigned long nr_running(void);
 extern unsigned long nr_uninterruptible(void);
 extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(void);
+extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
@@ -214,6 +214,7 @@
 
 #define task_is_traced(task)	((task->state & __TASK_TRACED) != 0)
 #define task_is_stopped(task)	((task->state & __TASK_STOPPED) != 0)
+#define task_is_dead(task)	((task)->exit_state != 0)
 #define task_is_stopped_or_traced(task)	\
 			((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
 #define task_contributes_to_load(task)	\
diff --git a/include/linux/security.h b/include/linux/security.h
index 0c88191..723a93d 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -470,8 +470,6 @@
  * @path_truncate:
  *	Check permission before truncating a file.
  *	@path contains the path structure for the file.
- *	@length is the new length of the file.
- *	@time_attrs is the flags passed to do_truncate().
  *	Return 0 if permission is granted.
  * @inode_getattr:
  *	Check permission before obtaining file attributes.
@@ -1412,8 +1410,7 @@
 	int (*path_rmdir) (struct path *dir, struct dentry *dentry);
 	int (*path_mknod) (struct path *dir, struct dentry *dentry, int mode,
 			   unsigned int dev);
-	int (*path_truncate) (struct path *path, loff_t length,
-			      unsigned int time_attrs);
+	int (*path_truncate) (struct path *path);
 	int (*path_symlink) (struct path *dir, struct dentry *dentry,
 			     const char *old_name);
 	int (*path_link) (struct dentry *old_dentry, struct path *new_dir,
@@ -2806,8 +2803,7 @@
 int security_path_rmdir(struct path *dir, struct dentry *dentry);
 int security_path_mknod(struct path *dir, struct dentry *dentry, int mode,
 			unsigned int dev);
-int security_path_truncate(struct path *path, loff_t length,
-			   unsigned int time_attrs);
+int security_path_truncate(struct path *path);
 int security_path_symlink(struct path *dir, struct dentry *dentry,
 			  const char *old_name);
 int security_path_link(struct dentry *old_dentry, struct path *new_dir,
@@ -2841,8 +2837,7 @@
 	return 0;
 }
 
-static inline int security_path_truncate(struct path *path, loff_t length,
-					 unsigned int time_attrs)
+static inline int security_path_truncate(struct path *path)
 {
 	return 0;
 }
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index f5364a1..baed212 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -2,9 +2,7 @@
 #define __LINUX_SERIAL_SCI_H
 
 #include <linux/serial_core.h>
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-#include <asm/dmaengine.h>
-#endif
+#include <linux/sh_dma.h>
 
 /*
  * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index bf243fc..f89e7fd 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -380,7 +380,10 @@
 	kmemcheck_bitfield_begin(flags2);
 	__u16			queue_mapping:16;
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
-	__u8			ndisc_nodetype:2;
+	__u8			ndisc_nodetype:2,
+				deliver_no_wcard:1;
+#else
+	__u8			deliver_no_wcard:1;
 #endif
 	kmemcheck_bitfield_end(flags2);
 
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5e781d8..bc7d6bb4 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -256,22 +256,22 @@
 static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
-#ifdef CONFIG_HIBERNATION_NVS
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
-#else /* CONFIG_HIBERNATION_NVS */
-static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
+#ifdef CONFIG_SUSPEND_NVS
+extern int suspend_nvs_register(unsigned long start, unsigned long size);
+extern int suspend_nvs_alloc(void);
+extern void suspend_nvs_free(void);
+extern void suspend_nvs_save(void);
+extern void suspend_nvs_restore(void);
+#else /* CONFIG_SUSPEND_NVS */
+static inline int suspend_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
 }
-static inline int hibernate_nvs_alloc(void) { return 0; }
-static inline void hibernate_nvs_free(void) {}
-static inline void hibernate_nvs_save(void) {}
-static inline void hibernate_nvs_restore(void) {}
-#endif /* CONFIG_HIBERNATION_NVS */
+static inline int suspend_nvs_alloc(void) { return 0; }
+static inline void suspend_nvs_free(void) {}
+static inline void suspend_nvs_save(void) {}
+static inline void suspend_nvs_restore(void) {}
+#endif /* CONFIG_SUSPEND_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a1a86a5..13ebb54 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -124,7 +124,8 @@
 extern struct trace_event_functions exit_syscall_print_funcs;
 
 #define SYSCALL_TRACE_ENTER_EVENT(sname)				\
-	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct syscall_metadata					\
+	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
 	static struct ftrace_event_call					\
 	__attribute__((__aligned__(4))) event_enter_##sname;		\
 	static struct ftrace_event_call __used				\
@@ -138,7 +139,8 @@
 	}
 
 #define SYSCALL_TRACE_EXIT_EVENT(sname)					\
-	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct syscall_metadata					\
+	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
 	static struct ftrace_event_call					\
 	__attribute__((__aligned__(4))) event_exit_##sname;		\
 	static struct ftrace_event_call __used				\
@@ -289,7 +291,7 @@
 				cap_user_data_t dataptr);
 asmlinkage long sys_capset(cap_user_header_t header,
 				const cap_user_data_t data);
-asmlinkage long sys_personality(u_long personality);
+asmlinkage long sys_personality(unsigned int personality);
 
 asmlinkage long sys_sigpending(old_sigset_t __user *set);
 asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 4496322e..609e8ca 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -45,6 +45,7 @@
  */
 
 void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
 int register_sysrq_key(int key, struct sysrq_key_op *op);
 int unregister_sysrq_key(int key, struct sysrq_key_op *op);
 struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 9a59d1f..103d1b6 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -14,6 +14,7 @@
  * See the file COPYING for more details.
  */
 
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/rcupdate.h>
 
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 92f1d99..383b94b 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,16 @@
 /* v1.0 and v2.0 of this standard have many things in common. For the rest
  * of the definitions, please refer to audio.h */
 
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x2;
+}
+
 /* 4.7.2.1 Clock Source Descriptor */
 
 struct uac_clock_source_descriptor {
@@ -31,6 +41,13 @@
 	__u8 iClockSource;
 } __attribute__((packed));
 
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT	0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED	0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR	0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG	0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF	(1 << 2)
+
 /* 4.7.2.2 Clock Source Descriptor */
 
 struct uac_clock_selector_descriptor {
@@ -39,8 +56,20 @@
 	__u8 bDescriptorSubtype;
 	__u8 bClockID;
 	__u8 bNrInPins;
-	__u8 bmControls;
 	__u8 baCSourceID[];
+	/* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bClockID;
+	__u8 bCSourceID;
+	__u8 bmControls;
+	__u8 iClockMultiplier;
 } __attribute__((packed));
 
 /* 4.7.2.4 Input terminal descriptor */
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 5d646c3..c51200c 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -47,6 +47,15 @@
 #define UAC_FORMAT_TYPE			0x02
 #define UAC_FORMAT_SPECIFIC		0x03
 
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED		0x00
+#define UAC_PROCESS_UP_DOWNMIX		0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC	0x02
+#define UAC_PROCESS_STEREO_EXTENDER	0x03
+#define UAC_PROCESS_REVERB		0x04
+#define UAC_PROCESS_CHORUS		0x05
+#define UAC_PROCESS_DYN_RANGE_COMP	0x06
+
 /* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
 #define UAC_EP_GENERAL			0x01
 
@@ -73,6 +82,60 @@
 
 #define UAC_GET_STAT			0xff
 
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT		0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE			0x01
+#define UAC_FU_VOLUME			0x02
+#define UAC_FU_BASS			0x03
+#define UAC_FU_MID			0x04
+#define UAC_FU_TREBLE			0x05
+#define UAC_FU_GRAPHIC_EQUALIZER	0x06
+#define UAC_FU_AUTOMATIC_GAIN		0x07
+#define UAC_FU_DELAY			0x08
+#define UAC_FU_BASS_BOOST		0x09
+#define UAC_FU_LOUDNESS			0x0a
+
+#define UAC_CONTROL_BIT(CS)	(1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE			0x01
+#define UAC_UD_MODE_SELECT		0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE			0x01
+#define UAC_DP_MODE_SELECT		0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE			0x01
+#define UAC_3D_SPACE			0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE		0x01
+#define UAC_REVERB_LEVEL		0x02
+#define UAC_REVERB_TIME			0x03
+#define UAC_REVERB_FEEDBACK		0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE		0x01
+#define UAC_CHORUS_LEVEL		0x02
+#define UAC_CHORUS_RATE			0x03
+#define UAC_CHORUS_DEPTH		0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE			0x01
+#define UAC_DCR_RATE			0x02
+#define UAC_DCR_MAXAMPL			0x03
+#define UAC_DCR_THRESHOLD		0x04
+#define UAC_DCR_ATTACK_TIME		0x05
+#define UAC_DCR_RELEASE_TIME		0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE			0x01
+
 /* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
 #define UAC_MS_HEADER			0x01
 #define UAC_MIDI_IN_JACK		0x02
@@ -244,7 +307,7 @@
 static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
 {
 	__u8 *raw = (__u8 *) desc;
-	return raw[9 + desc->bLength - 1];
+	return raw[desc->bLength - 1];
 }
 
 /* 4.3.2.5 Feature Unit Descriptor */
@@ -463,31 +526,6 @@
 #define UAC_EP_CS_ATTR_PITCH_CONTROL	0x02
 #define UAC_EP_CS_ATTR_FILL_MAX		0x80
 
-/* A.10.2 Feature Unit Control Selectors */
-
-#define UAC_FU_CONTROL_UNDEFINED	0x00
-#define UAC_MUTE_CONTROL		0x01
-#define UAC_VOLUME_CONTROL		0x02
-#define UAC_BASS_CONTROL		0x03
-#define UAC_MID_CONTROL			0x04
-#define UAC_TREBLE_CONTROL		0x05
-#define UAC_GRAPHIC_EQUALIZER_CONTROL	0x06
-#define UAC_AUTOMATIC_GAIN_CONTROL	0x07
-#define UAC_DELAY_CONTROL		0x08
-#define UAC_BASS_BOOST_CONTROL		0x09
-#define UAC_LOUDNESS_CONTROL		0x0a
-
-#define UAC_FU_MUTE		(1 << (UAC_MUTE_CONTROL - 1))
-#define UAC_FU_VOLUME		(1 << (UAC_VOLUME_CONTROL - 1))
-#define UAC_FU_BASS		(1 << (UAC_BASS_CONTROL - 1))
-#define UAC_FU_MID		(1 << (UAC_MID_CONTROL - 1))
-#define UAC_FU_TREBLE		(1 << (UAC_TREBLE_CONTROL - 1))
-#define UAC_FU_GRAPHIC_EQ	(1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
-#define UAC_FU_AUTO_GAIN	(1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
-#define UAC_FU_DELAY		(1 << (UAC_DELAY_CONTROL - 1))
-#define UAC_FU_BASS_BOOST	(1 << (UAC_BASS_BOOST_CONTROL - 1))
-#define UAC_FU_LOUDNESS		(1 << (UAC_LOUDNESS_CONTROL - 1))
-
 /* status word format (3.7.1.1) */
 
 #define UAC1_STATUS_TYPE_ORIG_MASK		0x0f
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index c9a9759..814f294 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -29,6 +29,7 @@
  */
 
 #ifndef LINUX_VGA_H
+#define LINUX_VGA_H
 
 #include <asm/vga.h>
 
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 5cf1176..395c38a4 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -4,6 +4,7 @@
  * compatible drivers/servers. */
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
+#include <linux/types.h>
 
 /* The feature bitmap for virtio 9P */
 
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index cc97d6c..c24eca7 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -27,10 +27,6 @@
  * in a manner such that unspecified fields are set to zero.
  */
 struct writeback_control {
-	struct backing_dev_info *bdi;	/* If !NULL, only write back this
-					   queue */
-	struct super_block *sb;		/* if !NULL, only write inodes from
-					   this super_block */
 	enum writeback_sync_modes sync_mode;
 	unsigned long *older_than_this;	/* If !NULL, only write back inodes
 					   older than this */
@@ -56,24 +52,6 @@
 	unsigned for_reclaim:1;		/* Invoked from the page allocator */
 	unsigned range_cyclic:1;	/* range_start is cyclic */
 	unsigned more_io:1;		/* more io to be dispatched */
-	/*
-	 * write_cache_pages() won't update wbc->nr_to_write and
-	 * mapping->writeback_index if no_nrwrite_index_update
-	 * is set.  write_cache_pages() may write more than we
-	 * requested and we want to make sure nr_to_write and
-	 * writeback_index are updated in a consistent manner
-	 * so we use a single control to update them
-	 */
-	unsigned no_nrwrite_index_update:1;
-
-	/*
-	 * For WB_SYNC_ALL, the sb must always be pinned. For WB_SYNC_NONE,
-	 * the writeback code will pin the sb for the caller. However,
-	 * for eg umount, the caller does WB_SYNC_NONE but already has
-	 * the sb pinned. If the below is set, caller already has the
-	 * sb pinned.
-	 */
-	unsigned sb_pinned:1;
 };
 
 /*
@@ -82,10 +60,10 @@
 struct bdi_writeback;
 int inode_wait(void *);
 void writeback_inodes_sb(struct super_block *);
-void writeback_inodes_sb_locked(struct super_block *);
 int writeback_inodes_sb_if_idle(struct super_block *);
 void sync_inodes_sb(struct super_block *);
-void writeback_inodes_wbc(struct writeback_control *wbc);
+void writeback_inodes_wb(struct bdi_writeback *wb,
+		struct writeback_control *wbc);
 long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
 void wakeup_flusher_threads(long nr_pages);
 
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index 0cfa1e9c..f1e5bde 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -33,6 +33,20 @@
 #define XATTR_USER_PREFIX "user."
 #define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
 
+/* Security namespace */
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
 struct inode;
 struct dentry;
 
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index fd88226..9696a5e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -799,7 +799,7 @@
 		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
 	X##_e = rsize - X##_e - 1;					\
 									\
-	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e)	\
+	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e)	\
 	  __FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
 	_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize);			\
 	if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0)			\
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 5833966..c78e99a 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -55,7 +55,8 @@
 #define RC_MAP_AVERMEDIA_A16D            "rc-avermedia-a16d"
 #define RC_MAP_AVERMEDIA_CARDBUS         "rc-avermedia-cardbus"
 #define RC_MAP_AVERMEDIA_DVBT            "rc-avermedia-dvbt"
-#define RC_MAP_AVERMEDIA_M135A_RM_JX     "rc-avermedia-m135a-rm-jx"
+#define RC_MAP_AVERMEDIA_M135A           "rc-avermedia-m135a"
+#define RC_MAP_AVERMEDIA_M733A_RM_K6     "rc-avermedia-m733a-rm-k6"
 #define RC_MAP_AVERMEDIA                 "rc-avermedia"
 #define RC_MAP_AVERTV_303                "rc-avertv-303"
 #define RC_MAP_BEHOLD_COLUMBUS           "rc-behold-columbus"
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index c9a5bbf..b8289c2 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -66,7 +66,7 @@
 	 * .get_formats() fail, .put_formats() will not be called at all, the
 	 * failing .get_formats() must then clean up internally.
 	 */
-	int (*get_formats)(struct soc_camera_device *, int,
+	int (*get_formats)(struct soc_camera_device *, unsigned int,
 			   struct soc_camera_format_xlate *);
 	void (*put_formats)(struct soc_camera_device *);
 	int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *);
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 5505c53..51811eac 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -130,6 +130,7 @@
 #define TUNER_PHILIPS_CU1216L           82
 #define TUNER_NXP_TDA18271		83
 #define TUNER_SONY_BTF_PXN01Z		84
+#define TUNER_PHILIPS_FQ1236_MK5	85	/* NTSC, TDA9885, no FM radio */
 
 /* tv card specific */
 #define TDA9887_PRESENT 		(1<<0)
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 0dbe02a..865cda7 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -40,6 +40,7 @@
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE,
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE,
 	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE,
+	V4L2_MBUS_FMT_SGRBG8_1X8,
 };
 
 /**
@@ -58,4 +59,24 @@
 	enum v4l2_colorspace		colorspace;
 };
 
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_fmt->width = mbus_fmt->width;
+	pix_fmt->height = mbus_fmt->height;
+	pix_fmt->field = mbus_fmt->field;
+	pix_fmt->colorspace = mbus_fmt->colorspace;
+}
+
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+			   const struct v4l2_pix_format *pix_fmt,
+			   enum v4l2_mbus_pixelcode code)
+{
+	mbus_fmt->width = pix_fmt->width;
+	mbus_fmt->height = pix_fmt->height;
+	mbus_fmt->field = pix_fmt->field;
+	mbus_fmt->colorspace = pix_fmt->colorspace;
+	mbus_fmt->code = code;
+}
+
 #endif
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a888893..02c6f4d 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -246,7 +246,7 @@
 			struct v4l2_dv_timings *timings);
 	int (*g_dv_timings)(struct v4l2_subdev *sd,
 			struct v4l2_dv_timings *timings);
-	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, int index,
+	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
 			     enum v4l2_mbus_pixelcode *code);
 	int (*g_mbus_fmt)(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *fmt);
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index 156c26b..a8de812 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -88,8 +88,16 @@
  * enum p9_msg_t - 9P message types
  * @P9_TSTATFS: file system status request
  * @P9_RSTATFS: file system status response
+ * @P9_TSYMLINK: make symlink request
+ * @P9_RSYMLINK: make symlink response
+ * @P9_TMKNOD: create a special file object request
+ * @P9_RMKNOD: create a special file object response
+ * @P9_TLCREATE: prepare a handle for I/O on an new file for 9P2000.L
+ * @P9_RLCREATE: response with file access information for 9P2000.L
  * @P9_TRENAME: rename request
  * @P9_RRENAME: rename response
+ * @P9_TMKDIR: create a directory request
+ * @P9_RMKDIR: create a directory response
  * @P9_TVERSION: version handshake request
  * @P9_RVERSION: version handshake response
  * @P9_TAUTH: request to establish authentication channel
@@ -131,8 +139,30 @@
 enum p9_msg_t {
 	P9_TSTATFS = 8,
 	P9_RSTATFS,
+	P9_TLOPEN = 12,
+	P9_RLOPEN,
+	P9_TLCREATE = 14,
+	P9_RLCREATE,
+	P9_TSYMLINK = 16,
+	P9_RSYMLINK,
+	P9_TMKNOD = 18,
+	P9_RMKNOD,
 	P9_TRENAME = 20,
 	P9_RRENAME,
+	P9_TGETATTR = 24,
+	P9_RGETATTR,
+	P9_TSETATTR = 26,
+	P9_RSETATTR,
+	P9_TXATTRWALK = 30,
+	P9_RXATTRWALK,
+	P9_TXATTRCREATE = 32,
+	P9_RXATTRCREATE,
+	P9_TREADDIR = 40,
+	P9_RREADDIR,
+	P9_TLINK = 70,
+	P9_RLINK,
+	P9_TMKDIR = 72,
+	P9_RMKDIR,
 	P9_TVERSION = 100,
 	P9_RVERSION,
 	P9_TAUTH = 102,
@@ -275,6 +305,9 @@
 /* ample room for Twrite/Rread header */
 #define P9_IOHDRSZ	24
 
+/* Room for readdir header */
+#define P9_READDIRHDRSZ	24
+
 /**
  * struct p9_str - length prefixed string type
  * @len: length of the string
@@ -357,6 +390,74 @@
 	u32 n_muid;		/* 9p2000.u extensions */
 };
 
+struct p9_stat_dotl {
+	u64 st_result_mask;
+	struct p9_qid qid;
+	u32 st_mode;
+	u32 st_uid;
+	u32 st_gid;
+	u64 st_nlink;
+	u64 st_rdev;
+	u64 st_size;
+	u64 st_blksize;
+	u64 st_blocks;
+	u64 st_atime_sec;
+	u64 st_atime_nsec;
+	u64 st_mtime_sec;
+	u64 st_mtime_nsec;
+	u64 st_ctime_sec;
+	u64 st_ctime_nsec;
+	u64 st_btime_sec;
+	u64 st_btime_nsec;
+	u64 st_gen;
+	u64 st_data_version;
+};
+
+#define P9_STATS_MODE		0x00000001ULL
+#define P9_STATS_NLINK		0x00000002ULL
+#define P9_STATS_UID		0x00000004ULL
+#define P9_STATS_GID		0x00000008ULL
+#define P9_STATS_RDEV		0x00000010ULL
+#define P9_STATS_ATIME		0x00000020ULL
+#define P9_STATS_MTIME		0x00000040ULL
+#define P9_STATS_CTIME		0x00000080ULL
+#define P9_STATS_INO		0x00000100ULL
+#define P9_STATS_SIZE		0x00000200ULL
+#define P9_STATS_BLOCKS		0x00000400ULL
+
+#define P9_STATS_BTIME		0x00000800ULL
+#define P9_STATS_GEN		0x00001000ULL
+#define P9_STATS_DATA_VERSION	0x00002000ULL
+
+#define P9_STATS_BASIC		0x000007ffULL /* Mask for fields up to BLOCKS */
+#define P9_STATS_ALL		0x00003fffULL /* Mask for All fields above */
+
+/**
+ * struct p9_iattr_dotl - P9 inode attribute for setattr
+ * @valid: bitfield specifying which fields are valid
+ *         same as in struct iattr
+ * @mode: File permission bits
+ * @uid: user id of owner
+ * @gid: group id
+ * @size: File size
+ * @atime_sec: Last access time, seconds
+ * @atime_nsec: Last access time, nanoseconds
+ * @mtime_sec: Last modification time, seconds
+ * @mtime_nsec: Last modification time, nanoseconds
+ */
+
+struct p9_iattr_dotl {
+	u32 valid;
+	u32 mode;
+	u32 uid;
+	u32 gid;
+	u64 size;
+	u64 atime_sec;
+	u64 atime_nsec;
+	u64 mtime_sec;
+	u64 mtime_nsec;
+};
+
 /* Structures for Protocol Operations */
 struct p9_tstatfs {
 	u32 fid;
@@ -485,6 +586,18 @@
 	u32 count;
 };
 
+struct p9_treaddir {
+	u32 fid;
+	u64 offset;
+	u32 count;
+};
+
+struct p9_rreaddir {
+	u32 count;
+	u8 *data;
+};
+
+
 struct p9_tclunk {
 	u32 fid;
 };
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 7dd3ed8..d1aa2cf 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -195,6 +195,21 @@
 	struct list_head dlist;	/* list of all fids attached to a dentry */
 };
 
+/**
+ * struct p9_dirent - directory entry structure
+ * @qid: The p9 server qid for this dirent
+ * @d_off: offset to the next dirent
+ * @d_type: type of file
+ * @d_name: file name
+ */
+
+struct p9_dirent {
+	struct p9_qid qid;
+	u64 d_off;
+	unsigned char d_type;
+	char d_name[256];
+};
+
 int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb);
 int p9_client_rename(struct p9_fid *fid, struct p9_fid *newdirfid, char *name);
 int p9_client_version(struct p9_client *);
@@ -211,15 +226,31 @@
 int p9_client_open(struct p9_fid *fid, int mode);
 int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
 							char *extension);
+int p9_client_link(struct p9_fid *fid, struct p9_fid *oldfid, char *newname);
+int p9_client_symlink(struct p9_fid *fid, char *name, char *symname, gid_t gid,
+							struct p9_qid *qid);
+int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
+		gid_t gid, struct p9_qid *qid);
 int p9_client_clunk(struct p9_fid *fid);
 int p9_client_remove(struct p9_fid *fid);
 int p9_client_read(struct p9_fid *fid, char *data, char __user *udata,
 							u64 offset, u32 count);
 int p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
 							u64 offset, u32 count);
+int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset);
+int p9dirent_read(char *buf, int len, struct p9_dirent *dirent,
+							int proto_version);
 struct p9_wstat *p9_client_stat(struct p9_fid *fid);
 int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst);
+int p9_client_setattr(struct p9_fid *fid, struct p9_iattr_dotl *attr);
 
+struct p9_stat_dotl *p9_client_getattr_dotl(struct p9_fid *fid,
+							u64 request_mask);
+
+int p9_client_mknod_dotl(struct p9_fid *oldfid, char *name, int mode,
+			dev_t rdev, gid_t gid, struct p9_qid *);
+int p9_client_mkdir_dotl(struct p9_fid *fid, char *name, int mode,
+				gid_t gid, struct p9_qid *);
 struct p9_req_t *p9_tag_lookup(struct p9_client *, u16);
 void p9_client_cb(struct p9_client *c, struct p9_req_t *req);
 
@@ -229,5 +260,7 @@
 
 int p9_is_proto_dotu(struct p9_client *clnt);
 int p9_is_proto_dotl(struct p9_client *clnt);
+struct p9_fid *p9_client_xattrwalk(struct p9_fid *, const char *, u64 *);
+int p9_client_xattrcreate(struct p9_fid *, const char *, u64, int);
 
 #endif /* NET_9P_CLIENT_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index 612069b..81d1413 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -250,11 +250,11 @@
  * Linux networking.  Thus, destinations are stackable.
  */
 
-static inline struct dst_entry *dst_pop(struct dst_entry *dst)
+static inline struct dst_entry *skb_dst_pop(struct sk_buff *skb)
 {
-	struct dst_entry *child = dst_clone(dst->child);
+	struct dst_entry *child = skb_dst(skb)->child;
 
-	dst_release(dst);
+	skb_dst_drop(skb);
 	return child;
 }
 
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 03ca5d8..433604b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -313,12 +313,24 @@
 extern void tcf_destroy(struct tcf_proto *tp);
 extern void tcf_destroy_chain(struct tcf_proto **fl);
 
-/* Reset all TX qdiscs of a device.  */
+/* Reset all TX qdiscs greater then index of a device.  */
+static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
+{
+	struct Qdisc *qdisc;
+
+	for (; i < dev->num_tx_queues; i++) {
+		qdisc = netdev_get_tx_queue(dev, i)->qdisc;
+		if (qdisc) {
+			spin_lock_bh(qdisc_lock(qdisc));
+			qdisc_reset(qdisc);
+			spin_unlock_bh(qdisc_lock(qdisc));
+		}
+	}
+}
+
 static inline void qdisc_reset_all_tx(struct net_device *dev)
 {
-	unsigned int i;
-	for (i = 0; i < dev->num_tx_queues; i++)
-		qdisc_reset(netdev_get_tx_queue(dev, i)->qdisc);
+	qdisc_reset_all_tx_gt(dev, 0);
 }
 
 /* Are all TX queues of the device empty?  */
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 92456f1..899003d 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -134,7 +134,7 @@
 #define SNMP_ADD_STATS_USER(mib, field, addend)	\
 			this_cpu_add(mib[1]->mibs[field], addend)
 #define SNMP_ADD_STATS(mib, field, addend)	\
-			this_cpu_add(mib[0]->mibs[field], addend)
+			this_cpu_add(mib[!in_softirq()]->mibs[field], addend)
 /*
  * Use "__typeof__(*mib[0]) *ptr" instead of "__typeof__(mib[0]) ptr"
  * to make @ptr a non-percpu pointer.
diff --git a/include/net/sock.h b/include/net/sock.h
index 731150d5..0a691ea 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1224,12 +1224,7 @@
 
 static inline int sk_tx_queue_get(const struct sock *sk)
 {
-	return sk->sk_tx_queue_mapping;
-}
-
-static inline bool sk_tx_queue_recorded(const struct sock *sk)
-{
-	return (sk && sk->sk_tx_queue_mapping >= 0);
+	return sk ? sk->sk_tx_queue_mapping : -1;
 }
 
 static inline void sk_set_socket(struct sock *sk, struct socket *sock)
diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
index ceac661..cfe2943 100644
--- a/include/net/tc_act/tc_mirred.h
+++ b/include/net/tc_act/tc_mirred.h
@@ -9,6 +9,7 @@
 	int			tcfm_ifindex;
 	int			tcfm_ok_push;
 	struct net_device	*tcfm_dev;
+	struct list_head	tcfm_list;
 };
 #define to_mirred(pc) \
 	container_of(pc, struct tcf_mirred, common)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 1913af6..fc8f36d 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1586,7 +1586,7 @@
 static inline int xfrm_mark_get(struct nlattr **attrs, struct xfrm_mark *m)
 {
 	if (attrs[XFRMA_MARK])
-		memcpy(m, nla_data(attrs[XFRMA_MARK]), sizeof(m));
+		memcpy(m, nla_data(attrs[XFRMA_MARK]), sizeof(struct xfrm_mark));
 	else
 		m->v = m->m = 0;
 
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index f5b1ba9..f3865c7 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -306,7 +306,6 @@
 		__field(	int,	pages_written		)
 		__field(	long,	pages_skipped		)
 		__field(	char,	more_io			)	
-		__field(	char,	no_nrwrite_index_update )
 		__field(       pgoff_t,	writeback_index		)
 	),
 
@@ -317,16 +316,14 @@
 		__entry->pages_written	= pages_written;
 		__entry->pages_skipped	= wbc->pages_skipped;
 		__entry->more_io	= wbc->more_io;
-		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
 		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d no_nrwrite_index_update %d writeback_index %lu",
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->ret,
 		  __entry->pages_written, __entry->pages_skipped,
 		  __entry->more_io,
-		  __entry->no_nrwrite_index_update,
 		  (unsigned long) __entry->writeback_index)
 );
 
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
index 814566c..17df434 100644
--- a/include/trace/events/signal.h
+++ b/include/trace/events/signal.h
@@ -10,7 +10,8 @@
 
 #define TP_STORE_SIGINFO(__entry, info)				\
 	do {							\
-		if (info == SEND_SIG_NOINFO) {			\
+		if (info == SEND_SIG_NOINFO ||			\
+		    info == SEND_SIG_FORCED) {			\
 			__entry->errno	= 0;			\
 			__entry->code	= SI_USER;		\
 		} else if (info == SEND_SIG_PRIV) {		\
diff --git a/init/main.c b/init/main.c
index 3bdb152..a42fdf4 100644
--- a/init/main.c
+++ b/init/main.c
@@ -125,7 +125,9 @@
 
 #ifdef CONFIG_SMP
 /* Setup configured maximum number of CPUs to activate */
-unsigned int __initdata setup_max_cpus = NR_CPUS;
+unsigned int setup_max_cpus = NR_CPUS;
+EXPORT_SYMBOL(setup_max_cpus);
+
 
 /*
  * Setup routine for controlling SMP activation
@@ -422,18 +424,26 @@
  * gcc-3.4 accidentally inlines this function, so use noinline.
  */
 
+static __initdata DECLARE_COMPLETION(kthreadd_done);
+
 static noinline void __init_refok rest_init(void)
 	__releases(kernel_lock)
 {
 	int pid;
 
 	rcu_scheduler_starting();
+	/*
+	 * We need to spawn init first so that it obtains pid 1, however
+	 * the init task will end up wanting to create kthreads, which, if
+	 * we schedule it before we create kthreadd, will OOPS.
+	 */
 	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
 	numa_default_policy();
 	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
 	rcu_read_lock();
 	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
 	rcu_read_unlock();
+	complete(&kthreadd_done);
 	unlock_kernel();
 
 	/*
@@ -855,6 +865,10 @@
 
 static int __init kernel_init(void * unused)
 {
+	/*
+	 * Wait until kthreadd is all set-up.
+	 */
+	wait_for_completion(&kthreadd_done);
 	lock_kernel();
 
 	/*
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 5108232..c93fd3f 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -176,7 +176,6 @@
 	}
 	return inode;
 out_inode:
-	make_bad_inode(inode);
 	iput(inode);
 	return NULL;
 }
diff --git a/ipc/sem.c b/ipc/sem.c
index 506c849..40a8f46 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1256,6 +1256,33 @@
 	return un;
 }
 
+
+/**
+ * get_queue_result - Retrieve the result code from sem_queue
+ * @q: Pointer to queue structure
+ *
+ * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
+ * q->status, then we must loop until the value is replaced with the final
+ * value: This may happen if a task is woken up by an unrelated event (e.g.
+ * signal) and in parallel the task is woken up by another task because it got
+ * the requested semaphores.
+ *
+ * The function can be called with or without holding the semaphore spinlock.
+ */
+static int get_queue_result(struct sem_queue *q)
+{
+	int error;
+
+	error = q->status;
+	while (unlikely(error == IN_WAKEUP)) {
+		cpu_relax();
+		error = q->status;
+	}
+
+	return error;
+}
+
+
 SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 		unsigned, nsops, const struct timespec __user *, timeout)
 {
@@ -1409,15 +1436,18 @@
 	else
 		schedule();
 
-	error = queue.status;
-	while(unlikely(error == IN_WAKEUP)) {
-		cpu_relax();
-		error = queue.status;
-	}
+	error = get_queue_result(&queue);
 
 	if (error != -EINTR) {
 		/* fast path: update_queue already obtained all requested
-		 * resources */
+		 * resources.
+		 * Perform a smp_mb(): User space could assume that semop()
+		 * is a memory barrier: Without the mb(), the cpu could
+		 * speculatively read in user space stale data that was
+		 * overwritten by the previous owner of the semaphore.
+		 */
+		smp_mb();
+
 		goto out_free;
 	}
 
@@ -1427,10 +1457,12 @@
 		goto out_free;
 	}
 
+	error = get_queue_result(&queue);
+
 	/*
 	 * If queue.status != -EINTR we are woken up by another process
 	 */
-	error = queue.status;
+
 	if (error != -EINTR) {
 		goto out_unlock_free;
 	}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 422cb19..3ac6f5b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4598,7 +4598,7 @@
 	parent_css = parent->subsys[subsys_id];
 	child_css = child->subsys[subsys_id];
 	parent_id = parent_css->id;
-	depth = parent_id->depth;
+	depth = parent_id->depth + 1;
 
 	child_id = get_new_cssid(ss, depth);
 	if (IS_ERR(child_id))
diff --git a/kernel/cred.c b/kernel/cred.c
index a2d5504..60bc8b1 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -209,6 +209,31 @@
 	}
 }
 
+/**
+ * get_task_cred - Get another task's objective credentials
+ * @task: The task to query
+ *
+ * Get the objective credentials of a task, pinning them so that they can't go
+ * away.  Accessing a task's credentials directly is not permitted.
+ *
+ * The caller must also make sure task doesn't get deleted, either by holding a
+ * ref on task or by holding tasklist_lock to prevent it from being unlinked.
+ */
+const struct cred *get_task_cred(struct task_struct *task)
+{
+	const struct cred *cred;
+
+	rcu_read_lock();
+
+	do {
+		cred = __task_cred((task));
+		BUG_ON(!cred);
+	} while (!atomic_inc_not_zero(&((struct cred *)cred)->usage));
+
+	rcu_read_unlock();
+	return cred;
+}
+
 /*
  * Allocate blank credentials, such that the credentials can be filled in at a
  * later date without risk of ENOMEM.
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cb7cd1..8bc5eef 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,13 +605,13 @@
 		if (dbg_kdb_mode) {
 			kgdb_connected = 1;
 			error = kdb_stub(ks);
+			kgdb_connected = 0;
 		} else {
 			error = gdb_serial_stub(ks);
 		}
 
 		if (error == DBG_PASS_EVENT) {
 			dbg_kdb_mode = !dbg_kdb_mode;
-			kgdb_connected = 0;
 		} else if (error == DBG_SWITCH_CPU_EVENT) {
 			dbg_cpu_switch(cpu, dbg_switch_cpu);
 			goto cpu_loop;
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4b17b32..e8fd686 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -621,10 +621,8 @@
 	switch (remcom_in_buffer[1]) {
 	case 's':
 	case 'f':
-		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
-			error_packet(remcom_out_buffer, -EINVAL);
+		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
 			break;
-		}
 
 		i = 0;
 		remcom_out_buffer[0] = 'm';
@@ -665,10 +663,9 @@
 		pack_threadid(remcom_out_buffer + 2, thref);
 		break;
 	case 'T':
-		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
-			error_packet(remcom_out_buffer, -EINVAL);
+		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
 			break;
-		}
+
 		ks->threadid = 0;
 		ptr = remcom_in_buffer + 17;
 		kgdb_hex2long(&ptr, &ks->threadid);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index b724c79..ebe4a28 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1820,9 +1820,8 @@
 {
 	if (argc != 1)
 		return KDB_ARGCOUNT;
-	sysrq_toggle_support(1);
 	kdb_trap_printk++;
-	handle_sysrq(*argv[1], NULL);
+	__handle_sysrq(*argv[1], NULL, 0);
 	kdb_trap_printk--;
 
 	return 0;
@@ -1857,12 +1856,6 @@
 }
 
 #if defined(CONFIG_MODULES)
-/* modules using other modules */
-struct module_use {
-	struct list_head list;
-	struct module *module_which_uses;
-};
-
 /*
  * kdb_lsmod - This function implements the 'lsmod' command.  Lists
  *	currently loaded kernel modules.
@@ -1889,14 +1882,15 @@
 			kdb_printf(" (Loading)");
 		else
 			kdb_printf(" (Live)");
+		kdb_printf(" 0x%p", mod->module_core);
 
 #ifdef CONFIG_MODULE_UNLOAD
 		{
 			struct module_use *use;
 			kdb_printf(" [ ");
-			list_for_each_entry(use, &mod->modules_which_use_me,
-					    list)
-				kdb_printf("%s ", use->module_which_uses->name);
+			list_for_each_entry(use, &mod->source_list,
+					    source_list)
+				kdb_printf("%s ", use->target->name);
 			kdb_printf("]\n");
 		}
 #endif
@@ -2297,6 +2291,9 @@
 	while (va) {
 		char buf[80];
 
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
+
 		sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
 		diag = kdb_parse(buf);
 		if (diag)
diff --git a/kernel/early_res.c b/kernel/early_res.c
index 31aa933..7bfae88 100644
--- a/kernel/early_res.c
+++ b/kernel/early_res.c
@@ -7,6 +7,8 @@
 #include <linux/bootmem.h>
 #include <linux/mm.h>
 #include <linux/early_res.h>
+#include <linux/slab.h>
+#include <linux/kmemleak.h>
 
 /*
  * Early reserved memory areas.
@@ -319,6 +321,8 @@
 	struct early_res *r;
 	int i;
 
+	kmemleak_free_part(__va(start), end - start);
+
 	i = find_overlapped_early(start, end);
 	r = &early_res[i];
 	if (i >= max_early_res || r->end != end || r->start != start)
@@ -333,6 +337,8 @@
 	struct early_res *r;
 	int i;
 
+	kmemleak_free_part(__va(start), end - start);
+
 	if (start == end)
 		return;
 
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c35452c..dd62f8e 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -27,7 +27,7 @@
 static DEFINE_RWLOCK(exec_domains_lock);
 
 
-static u_long ident_map[32] = {
+static unsigned long ident_map[32] = {
 	0,	1,	2,	3,	4,	5,	6,	7,
 	8,	9,	10,	11,	12,	13,	14,	15,
 	16,	17,	18,	19,	20,	21,	22,	23,
@@ -56,10 +56,10 @@
 }
 
 static struct exec_domain *
-lookup_exec_domain(u_long personality)
+lookup_exec_domain(unsigned int personality)
 {
-	struct exec_domain *	ep;
-	u_long			pers = personality(personality);
+	unsigned int pers = personality(personality);
+	struct exec_domain *ep;
 
 	read_lock(&exec_domains_lock);
 	for (ep = exec_domains; ep; ep = ep->next) {
@@ -70,7 +70,7 @@
 
 #ifdef CONFIG_MODULES
 	read_unlock(&exec_domains_lock);
-	request_module("personality-%ld", pers);
+	request_module("personality-%d", pers);
 	read_lock(&exec_domains_lock);
 
 	for (ep = exec_domains; ep; ep = ep->next) {
@@ -135,7 +135,7 @@
 }
 
 int
-__set_personality(u_long personality)
+__set_personality(unsigned int personality)
 {
 	struct exec_domain	*ep, *oep;
 
@@ -188,9 +188,9 @@
 module_init(proc_execdomains_init);
 #endif
 
-SYSCALL_DEFINE1(personality, u_long, personality)
+SYSCALL_DEFINE1(personality, unsigned int, personality)
 {
-	u_long old = current->personality;
+	unsigned int old = current->personality;
 
 	if (personality != 0xffffffff) {
 		set_personality(personality);
@@ -198,7 +198,7 @@
 			return -EINVAL;
 	}
 
-	return (long)old;
+	return old;
 }
 
 
diff --git a/kernel/futex.c b/kernel/futex.c
index e7a35f10..6a3a5fa 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -429,20 +429,11 @@
 static struct task_struct * futex_find_get_task(pid_t pid)
 {
 	struct task_struct *p;
-	const struct cred *cred = current_cred(), *pcred;
 
 	rcu_read_lock();
 	p = find_task_by_vpid(pid);
-	if (!p) {
-		p = ERR_PTR(-ESRCH);
-	} else {
-		pcred = __task_cred(p);
-		if (cred->euid != pcred->euid &&
-		    cred->euid != pcred->uid)
-			p = ERR_PTR(-ESRCH);
-		else
-			get_task_struct(p);
-	}
+	if (p)
+		get_task_struct(p);
 
 	rcu_read_unlock();
 
@@ -564,8 +555,8 @@
 	if (!pid)
 		return -ESRCH;
 	p = futex_find_get_task(pid);
-	if (IS_ERR(p))
-		return PTR_ERR(p);
+	if (!p)
+		return -ESRCH;
 
 	/*
 	 * We need to look at the task state flags to figure out,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3164ba7..e149748 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -456,6 +456,9 @@
 		/* note that IRQF_TRIGGER_MASK == IRQ_TYPE_SENSE_MASK */
 		desc->status &= ~(IRQ_LEVEL | IRQ_TYPE_SENSE_MASK);
 		desc->status |= flags;
+
+		if (chip != desc->chip)
+			irq_chip_set_defaults(desc->chip);
 	}
 
 	return ret;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 474a847..131b170 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1089,9 +1089,10 @@
 
 size_t crash_get_memory_size(void)
 {
-	size_t size;
+	size_t size = 0;
 	mutex_lock(&kexec_mutex);
-	size = crashk_res.end - crashk_res.start + 1;
+	if (crashk_res.end != crashk_res.start)
+		size = crashk_res.end - crashk_res.start + 1;
 	mutex_unlock(&kexec_mutex);
 	return size;
 }
@@ -1134,7 +1135,7 @@
 
 	free_reserved_phys_range(end, crashk_res.end);
 
-	if (start == end)
+	if ((start == end) && (crashk_res.parent != NULL))
 		release_resource(&crashk_res);
 	crashk_res.end = end - 1;
 
diff --git a/kernel/module.c b/kernel/module.c
index 0129769..6c56282 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -72,7 +72,11 @@
 /* If this is set, the section belongs in the init part of the module */
 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
 
-/* List of modules, protected by module_mutex or preempt_disable
+/*
+ * Mutex protects:
+ * 1) List of modules (also safely readable with preempt_disable),
+ * 2) module_use links,
+ * 3) module_addr_min/module_addr_max.
  * (delete uses stop_machine/add uses RCU list operations). */
 DEFINE_MUTEX(module_mutex);
 EXPORT_SYMBOL_GPL(module_mutex);
@@ -90,7 +94,8 @@
 
 static BLOCKING_NOTIFIER_HEAD(module_notify_list);
 
-/* Bounds of module allocation, for speeding __module_address */
+/* Bounds of module allocation, for speeding __module_address.
+ * Protected by module_mutex. */
 static unsigned long module_addr_min = -1UL, module_addr_max = 0;
 
 int register_module_notifier(struct notifier_block * nb)
@@ -329,7 +334,7 @@
 }
 
 /* Find a symbol and return it, along with, (optional) crc and
- * (optional) module which owns it */
+ * (optional) module which owns it.  Needs preempt disabled or module_mutex. */
 const struct kernel_symbol *find_symbol(const char *name,
 					struct module **owner,
 					const unsigned long **crc,
@@ -523,7 +528,8 @@
 {
 	int cpu;
 
-	INIT_LIST_HEAD(&mod->modules_which_use_me);
+	INIT_LIST_HEAD(&mod->source_list);
+	INIT_LIST_HEAD(&mod->target_list);
 	for_each_possible_cpu(cpu) {
 		per_cpu_ptr(mod->refptr, cpu)->incs = 0;
 		per_cpu_ptr(mod->refptr, cpu)->decs = 0;
@@ -535,20 +541,13 @@
 	mod->waiter = current;
 }
 
-/* modules using other modules */
-struct module_use
-{
-	struct list_head list;
-	struct module *module_which_uses;
-};
-
 /* Does a already use b? */
 static int already_uses(struct module *a, struct module *b)
 {
 	struct module_use *use;
 
-	list_for_each_entry(use, &b->modules_which_use_me, list) {
-		if (use->module_which_uses == a) {
+	list_for_each_entry(use, &b->source_list, source_list) {
+		if (use->source == a) {
 			DEBUGP("%s uses %s!\n", a->name, b->name);
 			return 1;
 		}
@@ -557,62 +556,68 @@
 	return 0;
 }
 
-/* Module a uses b */
-int use_module(struct module *a, struct module *b)
+/*
+ * Module a uses b
+ *  - we add 'a' as a "source", 'b' as a "target" of module use
+ *  - the module_use is added to the list of 'b' sources (so
+ *    'b' can walk the list to see who sourced them), and of 'a'
+ *    targets (so 'a' can see what modules it targets).
+ */
+static int add_module_usage(struct module *a, struct module *b)
 {
 	struct module_use *use;
-	int no_warn, err;
-
-	if (b == NULL || already_uses(a, b)) return 1;
-
-	/* If we're interrupted or time out, we fail. */
-	if (wait_event_interruptible_timeout(
-		    module_wq, (err = strong_try_module_get(b)) != -EBUSY,
-		    30 * HZ) <= 0) {
-		printk("%s: gave up waiting for init of module %s.\n",
-		       a->name, b->name);
-		return 0;
-	}
-
-	/* If strong_try_module_get() returned a different error, we fail. */
-	if (err)
-		return 0;
 
 	DEBUGP("Allocating new usage for %s.\n", a->name);
 	use = kmalloc(sizeof(*use), GFP_ATOMIC);
 	if (!use) {
-		printk("%s: out of memory loading\n", a->name);
-		module_put(b);
-		return 0;
+		printk(KERN_WARNING "%s: out of memory loading\n", a->name);
+		return -ENOMEM;
 	}
 
-	use->module_which_uses = a;
-	list_add(&use->list, &b->modules_which_use_me);
-	no_warn = sysfs_create_link(b->holders_dir, &a->mkobj.kobj, a->name);
-	return 1;
+	use->source = a;
+	use->target = b;
+	list_add(&use->source_list, &b->source_list);
+	list_add(&use->target_list, &a->target_list);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(use_module);
+
+/* Module a uses b: caller needs module_mutex() */
+int ref_module(struct module *a, struct module *b)
+{
+	int err;
+
+	if (b == NULL || already_uses(a, b))
+		return 0;
+
+	/* If module isn't available, we fail. */
+	err = strong_try_module_get(b);
+	if (err)
+		return err;
+
+	err = add_module_usage(a, b);
+	if (err) {
+		module_put(b);
+		return err;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ref_module);
 
 /* Clear the unload stuff of the module. */
 static void module_unload_free(struct module *mod)
 {
-	struct module *i;
+	struct module_use *use, *tmp;
 
-	list_for_each_entry(i, &modules, list) {
-		struct module_use *use;
-
-		list_for_each_entry(use, &i->modules_which_use_me, list) {
-			if (use->module_which_uses == mod) {
-				DEBUGP("%s unusing %s\n", mod->name, i->name);
-				module_put(i);
-				list_del(&use->list);
-				kfree(use);
-				sysfs_remove_link(i->holders_dir, mod->name);
-				/* There can be at most one match. */
-				break;
-			}
-		}
+	mutex_lock(&module_mutex);
+	list_for_each_entry_safe(use, tmp, &mod->target_list, target_list) {
+		struct module *i = use->target;
+		DEBUGP("%s unusing %s\n", mod->name, i->name);
+		module_put(i);
+		list_del(&use->source_list);
+		list_del(&use->target_list);
+		kfree(use);
 	}
+	mutex_unlock(&module_mutex);
 }
 
 #ifdef CONFIG_MODULE_FORCE_UNLOAD
@@ -735,7 +740,7 @@
 		goto out;
 	}
 
-	if (!list_empty(&mod->modules_which_use_me)) {
+	if (!list_empty(&mod->source_list)) {
 		/* Other modules depend on us: get rid of them first. */
 		ret = -EWOULDBLOCK;
 		goto out;
@@ -779,13 +784,13 @@
 	blocking_notifier_call_chain(&module_notify_list,
 				     MODULE_STATE_GOING, mod);
 	async_synchronize_full();
-	mutex_lock(&module_mutex);
+
 	/* Store the name of the last unloaded module for diagnostic purposes */
 	strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
-	ddebug_remove_module(mod->name);
-	free_module(mod);
 
- out:
+	free_module(mod);
+	return 0;
+out:
 	mutex_unlock(&module_mutex);
 	return ret;
 }
@@ -799,9 +804,9 @@
 
 	/* Always include a trailing , so userspace can differentiate
            between this and the old multi-field proc format. */
-	list_for_each_entry(use, &mod->modules_which_use_me, list) {
+	list_for_each_entry(use, &mod->source_list, source_list) {
 		printed_something = 1;
-		seq_printf(m, "%s,", use->module_which_uses->name);
+		seq_printf(m, "%s,", use->source->name);
 	}
 
 	if (mod->init != NULL && mod->exit == NULL) {
@@ -880,11 +885,11 @@
 {
 }
 
-int use_module(struct module *a, struct module *b)
+int ref_module(struct module *a, struct module *b)
 {
-	return strong_try_module_get(b) == 0;
+	return strong_try_module_get(b);
 }
-EXPORT_SYMBOL_GPL(use_module);
+EXPORT_SYMBOL_GPL(ref_module);
 
 static inline void module_unload_init(struct module *mod)
 {
@@ -1001,6 +1006,8 @@
 {
 	const unsigned long *crc;
 
+	/* Since this should be found in kernel (which can't be removed),
+	 * no locking is necessary. */
 	if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
 			 &crc, true, false))
 		BUG();
@@ -1043,29 +1050,62 @@
 }
 #endif /* CONFIG_MODVERSIONS */
 
-/* Resolve a symbol for this module.  I.e. if we find one, record usage.
-   Must be holding module_mutex. */
+/* Resolve a symbol for this module.  I.e. if we find one, record usage. */
 static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
 						  unsigned int versindex,
 						  const char *name,
-						  struct module *mod)
+						  struct module *mod,
+						  char ownername[])
 {
 	struct module *owner;
 	const struct kernel_symbol *sym;
 	const unsigned long *crc;
+	int err;
 
+	mutex_lock(&module_mutex);
 	sym = find_symbol(name, &owner, &crc,
 			  !(mod->taints & (1 << TAINT_PROPRIETARY_MODULE)), true);
-	/* use_module can fail due to OOM,
-	   or module initialization or unloading */
-	if (sym) {
-		if (!check_version(sechdrs, versindex, name, mod, crc, owner)
-		    || !use_module(mod, owner))
-			sym = NULL;
+	if (!sym)
+		goto unlock;
+
+	if (!check_version(sechdrs, versindex, name, mod, crc, owner)) {
+		sym = ERR_PTR(-EINVAL);
+		goto getname;
 	}
+
+	err = ref_module(mod, owner);
+	if (err) {
+		sym = ERR_PTR(err);
+		goto getname;
+	}
+
+getname:
+	/* We must make copy under the lock if we failed to get ref. */
+	strncpy(ownername, module_name(owner), MODULE_NAME_LEN);
+unlock:
+	mutex_unlock(&module_mutex);
 	return sym;
 }
 
+static const struct kernel_symbol *resolve_symbol_wait(Elf_Shdr *sechdrs,
+						       unsigned int versindex,
+						       const char *name,
+						       struct module *mod)
+{
+	const struct kernel_symbol *ksym;
+	char ownername[MODULE_NAME_LEN];
+
+	if (wait_event_interruptible_timeout(module_wq,
+			!IS_ERR(ksym = resolve_symbol(sechdrs, versindex, name,
+						      mod, ownername)) ||
+			PTR_ERR(ksym) != -EBUSY,
+					     30 * HZ) <= 0) {
+		printk(KERN_WARNING "%s: gave up waiting for init of module %s.\n",
+		       mod->name, ownername);
+	}
+	return ksym;
+}
+
 /*
  * /sys/module/foo/sections stuff
  * J. Corbet <corbet@lwn.net>
@@ -1295,7 +1335,34 @@
 #endif
 
 #ifdef CONFIG_SYSFS
-int module_add_modinfo_attrs(struct module *mod)
+static void add_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+	struct module_use *use;
+	int nowarn;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry(use, &mod->target_list, target_list) {
+		nowarn = sysfs_create_link(use->target->holders_dir,
+					   &mod->mkobj.kobj, mod->name);
+	}
+	mutex_unlock(&module_mutex);
+#endif
+}
+
+static void del_usage_links(struct module *mod)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+	struct module_use *use;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry(use, &mod->target_list, target_list)
+		sysfs_remove_link(use->target->holders_dir, mod->name);
+	mutex_unlock(&module_mutex);
+#endif
+}
+
+static int module_add_modinfo_attrs(struct module *mod)
 {
 	struct module_attribute *attr;
 	struct module_attribute *temp_attr;
@@ -1321,7 +1388,7 @@
 	return error;
 }
 
-void module_remove_modinfo_attrs(struct module *mod)
+static void module_remove_modinfo_attrs(struct module *mod)
 {
 	struct module_attribute *attr;
 	int i;
@@ -1337,7 +1404,7 @@
 	kfree(mod->modinfo_attrs);
 }
 
-int mod_sysfs_init(struct module *mod)
+static int mod_sysfs_init(struct module *mod)
 {
 	int err;
 	struct kobject *kobj;
@@ -1371,12 +1438,16 @@
 	return err;
 }
 
-int mod_sysfs_setup(struct module *mod,
+static int mod_sysfs_setup(struct module *mod,
 			   struct kernel_param *kparam,
 			   unsigned int num_params)
 {
 	int err;
 
+	err = mod_sysfs_init(mod);
+	if (err)
+		goto out;
+
 	mod->holders_dir = kobject_create_and_add("holders", &mod->mkobj.kobj);
 	if (!mod->holders_dir) {
 		err = -ENOMEM;
@@ -1391,6 +1462,8 @@
 	if (err)
 		goto out_unreg_param;
 
+	add_usage_links(mod);
+
 	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
 	return 0;
 
@@ -1400,6 +1473,7 @@
 	kobject_put(mod->holders_dir);
 out_unreg:
 	kobject_put(&mod->mkobj.kobj);
+out:
 	return err;
 }
 
@@ -1410,14 +1484,40 @@
 
 #else /* CONFIG_SYSFS */
 
+static inline int mod_sysfs_init(struct module *mod)
+{
+	return 0;
+}
+
+static inline int mod_sysfs_setup(struct module *mod,
+			   struct kernel_param *kparam,
+			   unsigned int num_params)
+{
+	return 0;
+}
+
+static inline int module_add_modinfo_attrs(struct module *mod)
+{
+	return 0;
+}
+
+static inline void module_remove_modinfo_attrs(struct module *mod)
+{
+}
+
 static void mod_sysfs_fini(struct module *mod)
 {
 }
 
+static void del_usage_links(struct module *mod)
+{
+}
+
 #endif /* CONFIG_SYSFS */
 
 static void mod_kobject_remove(struct module *mod)
 {
+	del_usage_links(mod);
 	module_remove_modinfo_attrs(mod);
 	module_param_sysfs_remove(mod);
 	kobject_put(mod->mkobj.drivers_dir);
@@ -1436,17 +1536,22 @@
 	return 0;
 }
 
-/* Free a module, remove from lists, etc (must hold module_mutex). */
+/* Free a module, remove from lists, etc. */
 static void free_module(struct module *mod)
 {
 	trace_module_free(mod);
 
 	/* Delete from various lists */
+	mutex_lock(&module_mutex);
 	stop_machine(__unlink_module, mod, NULL);
+	mutex_unlock(&module_mutex);
 	remove_notes_attrs(mod);
 	remove_sect_attrs(mod);
 	mod_kobject_remove(mod);
 
+	/* Remove dynamic debug info */
+	ddebug_remove_module(mod->name);
+
 	/* Arch-specific cleanup. */
 	module_arch_cleanup(mod);
 
@@ -1493,6 +1598,8 @@
 /*
  * Ensure that an exported symbol [global namespace] does not already exist
  * in the kernel or in some other module's exported symbol table.
+ *
+ * You must hold the module_mutex.
  */
 static int verify_export_symbols(struct module *mod)
 {
@@ -1558,21 +1665,23 @@
 			break;
 
 		case SHN_UNDEF:
-			ksym = resolve_symbol(sechdrs, versindex,
-					      strtab + sym[i].st_name, mod);
+			ksym = resolve_symbol_wait(sechdrs, versindex,
+						   strtab + sym[i].st_name,
+						   mod);
 			/* Ok if resolved.  */
-			if (ksym) {
+			if (ksym && !IS_ERR(ksym)) {
 				sym[i].st_value = ksym->value;
 				break;
 			}
 
 			/* Ok if weak.  */
-			if (ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
+			if (!ksym && ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
 				break;
 
-			printk(KERN_WARNING "%s: Unknown symbol %s\n",
-			       mod->name, strtab + sym[i].st_name);
-			ret = -ENOENT;
+			printk(KERN_WARNING "%s: Unknown symbol %s (err %li)\n",
+			       mod->name, strtab + sym[i].st_name,
+			       PTR_ERR(ksym));
+			ret = PTR_ERR(ksym) ?: -ENOENT;
 			break;
 
 		default:
@@ -1955,16 +2064,24 @@
 #endif
 }
 
+static void dynamic_debug_remove(struct _ddebug *debug)
+{
+	if (debug)
+		ddebug_remove_module(debug->modname);
+}
+
 static void *module_alloc_update_bounds(unsigned long size)
 {
 	void *ret = module_alloc(size);
 
 	if (ret) {
+		mutex_lock(&module_mutex);
 		/* Update module bounds. */
 		if ((unsigned long)ret < module_addr_min)
 			module_addr_min = (unsigned long)ret;
 		if ((unsigned long)ret + size > module_addr_max)
 			module_addr_max = (unsigned long)ret + size;
+		mutex_unlock(&module_mutex);
 	}
 	return ret;
 }
@@ -2015,6 +2132,8 @@
 	void *ptr = NULL; /* Stops spurious gcc warning */
 	unsigned long symoffs, stroffs, *strmap;
 	void __percpu *percpu;
+	struct _ddebug *debug = NULL;
+	unsigned int num_debug = 0;
 
 	mm_segment_t old_fs;
 
@@ -2139,11 +2258,6 @@
 		goto free_mod;
 	}
 
-	if (find_module(mod->name)) {
-		err = -EEXIST;
-		goto free_mod;
-	}
-
 	mod->state = MODULE_STATE_COMING;
 
 	/* Allow arches to frob section contents and sizes.  */
@@ -2234,11 +2348,6 @@
 	/* Now we've moved module, initialize linked lists, etc. */
 	module_unload_init(mod);
 
-	/* add kobject, so we can reference it. */
-	err = mod_sysfs_init(mod);
-	if (err)
-		goto free_unload;
-
 	/* Set up license info based on the info section */
 	set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
 
@@ -2363,11 +2472,6 @@
 			goto cleanup;
 	}
 
-        /* Find duplicate symbols */
-	err = verify_export_symbols(mod);
-	if (err < 0)
-		goto cleanup;
-
   	/* Set up and sort exception table */
 	mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table",
 				    sizeof(*mod->extable), &mod->num_exentries);
@@ -2382,15 +2486,9 @@
 	kfree(strmap);
 	strmap = NULL;
 
-	if (!mod->taints) {
-		struct _ddebug *debug;
-		unsigned int num_debug;
-
+	if (!mod->taints)
 		debug = section_objs(hdr, sechdrs, secstrings, "__verbose",
 				     sizeof(*debug), &num_debug);
-		if (debug)
-			dynamic_debug_setup(debug, num_debug);
-	}
 
 	err = module_finalize(hdr, sechdrs, mod);
 	if (err < 0)
@@ -2426,7 +2524,22 @@
 	 * function to insert in a way safe to concurrent readers.
 	 * The mutex protects against concurrent writers.
 	 */
+	mutex_lock(&module_mutex);
+	if (find_module(mod->name)) {
+		err = -EEXIST;
+		goto unlock;
+	}
+
+	if (debug)
+		dynamic_debug_setup(debug, num_debug);
+
+	/* Find duplicate symbols */
+	err = verify_export_symbols(mod);
+	if (err < 0)
+		goto ddebug;
+
 	list_add_rcu(&mod->list, &modules);
+	mutex_unlock(&module_mutex);
 
 	err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL);
 	if (err < 0)
@@ -2435,6 +2548,7 @@
 	err = mod_sysfs_setup(mod, mod->kp, mod->num_kp);
 	if (err < 0)
 		goto unlink;
+
 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
 	add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
 
@@ -2447,15 +2561,17 @@
 	return mod;
 
  unlink:
+	mutex_lock(&module_mutex);
 	/* Unlink carefully: kallsyms could be walking list. */
 	list_del_rcu(&mod->list);
+ ddebug:
+	dynamic_debug_remove(debug);
+ unlock:
+	mutex_unlock(&module_mutex);
 	synchronize_sched();
 	module_arch_cleanup(mod);
  cleanup:
 	free_modinfo(mod);
-	kobject_del(&mod->mkobj.kobj);
-	kobject_put(&mod->mkobj.kobj);
- free_unload:
 	module_unload_free(mod);
 #if defined(CONFIG_MODULE_UNLOAD)
 	free_percpu(mod->refptr);
@@ -2502,19 +2618,10 @@
 	if (!capable(CAP_SYS_MODULE) || modules_disabled)
 		return -EPERM;
 
-	/* Only one module load at a time, please */
-	if (mutex_lock_interruptible(&module_mutex) != 0)
-		return -EINTR;
-
 	/* Do all the hard work */
 	mod = load_module(umod, len, uargs);
-	if (IS_ERR(mod)) {
-		mutex_unlock(&module_mutex);
+	if (IS_ERR(mod))
 		return PTR_ERR(mod);
-	}
-
-	/* Drop lock so they can recurse */
-	mutex_unlock(&module_mutex);
 
 	blocking_notifier_call_chain(&module_notify_list,
 			MODULE_STATE_COMING, mod);
@@ -2531,9 +2638,7 @@
 		module_put(mod);
 		blocking_notifier_call_chain(&module_notify_list,
 					     MODULE_STATE_GOING, mod);
-		mutex_lock(&module_mutex);
 		free_module(mod);
-		mutex_unlock(&module_mutex);
 		wake_up(&module_wq);
 		return ret;
 	}
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 31d6afe..ff86c55 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -1507,6 +1507,9 @@
 		divisor = nsec * frequency;
 	}
 
+	if (!divisor)
+		return dividend;
+
 	return div64_u64(dividend, divisor);
 }
 
@@ -1529,7 +1532,7 @@
 static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
 {
 	struct hw_perf_event *hwc = &event->hw;
-	u64 period, sample_period;
+	s64 period, sample_period;
 	s64 delta;
 
 	period = perf_calculate_period(event, nsec, count);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5c36ea9..ca6066a 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -99,9 +99,13 @@
 	depends on PM_ADVANCED_DEBUG
 	default n
 
+config SUSPEND_NVS
+       bool
+
 config SUSPEND
 	bool "Suspend to RAM and standby"
 	depends on PM && ARCH_SUSPEND_POSSIBLE
+	select SUSPEND_NVS if HAS_IOMEM
 	default y
 	---help---
 	  Allow the system to enter sleep states in which main memory is
@@ -130,13 +134,10 @@
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
-config HIBERNATION_NVS
-	bool
-
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
-	select HIBERNATION_NVS if HAS_IOMEM
+	select SUSPEND_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 524e058..f9063c6 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -10,6 +10,6 @@
 obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o user.o \
 				   block_io.o
-obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
+obj-$(CONFIG_SUSPEND_NVS)	+= nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/nvs.c
similarity index 80%
rename from kernel/power/hibernate_nvs.c
rename to kernel/power/nvs.c
index fdcad9e..1836db6 100644
--- a/kernel/power/hibernate_nvs.c
+++ b/kernel/power/nvs.c
@@ -15,7 +15,7 @@
 
 /*
  * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
+ * suspend and to restore the contents of this memory during the subsequent
  * resume.  The code below implements a mechanism allowing us to do that.
  */
 
@@ -30,7 +30,7 @@
 static LIST_HEAD(nvs_list);
 
 /**
- *	hibernate_nvs_register - register platform NVS memory region to save
+ *	suspend_nvs_register - register platform NVS memory region to save
  *	@start - physical address of the region
  *	@size - size of the region
  *
@@ -38,7 +38,7 @@
  *	things so that the data from page-aligned addresses in this region will
  *	be copied into separate RAM pages.
  */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
+int suspend_nvs_register(unsigned long start, unsigned long size)
 {
 	struct nvs_page *entry, *next;
 
@@ -68,9 +68,9 @@
 }
 
 /**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
+ *	suspend_nvs_free - free data pages allocated for saving NVS regions
  */
-void hibernate_nvs_free(void)
+void suspend_nvs_free(void)
 {
 	struct nvs_page *entry;
 
@@ -86,16 +86,16 @@
 }
 
 /**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ *	suspend_nvs_alloc - allocate memory necessary for saving NVS regions
  */
-int hibernate_nvs_alloc(void)
+int suspend_nvs_alloc(void)
 {
 	struct nvs_page *entry;
 
 	list_for_each_entry(entry, &nvs_list, node) {
 		entry->data = (void *)__get_free_page(GFP_KERNEL);
 		if (!entry->data) {
-			hibernate_nvs_free();
+			suspend_nvs_free();
 			return -ENOMEM;
 		}
 	}
@@ -103,9 +103,9 @@
 }
 
 /**
- *	hibernate_nvs_save - save NVS memory regions
+ *	suspend_nvs_save - save NVS memory regions
  */
-void hibernate_nvs_save(void)
+void suspend_nvs_save(void)
 {
 	struct nvs_page *entry;
 
@@ -119,12 +119,12 @@
 }
 
 /**
- *	hibernate_nvs_restore - restore NVS memory regions
+ *	suspend_nvs_restore - restore NVS memory regions
  *
  *	This function is going to be called with interrupts disabled, so it
  *	cannot iounmap the virtual addresses used to access the NVS region.
  */
-void hibernate_nvs_restore(void)
+void suspend_nvs_restore(void)
 {
 	struct nvs_page *entry;
 
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 56e7dbb..f37cb7d 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -16,6 +16,12 @@
 #include <linux/cpu.h>
 #include <linux/syscalls.h>
 #include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
 
 #include "power.h"
 
diff --git a/kernel/sched.c b/kernel/sched.c
index f8b8996..f52a880 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -306,52 +306,6 @@
  */
 struct task_group init_task_group;
 
-/* return group to which a task belongs */
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	struct task_group *tg;
-
-#ifdef CONFIG_CGROUP_SCHED
-	tg = container_of(task_subsys_state(p, cpu_cgroup_subsys_id),
-				struct task_group, css);
-#else
-	tg = &init_task_group;
-#endif
-	return tg;
-}
-
-/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
-{
-	/*
-	 * Strictly speaking this rcu_read_lock() is not needed since the
-	 * task_group is tied to the cgroup, which in turn can never go away
-	 * as long as there are tasks attached to it.
-	 *
-	 * However since task_group() uses task_subsys_state() which is an
-	 * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
-	 */
-	rcu_read_lock();
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
-	p->se.parent = task_group(p)->se[cpu];
-#endif
-
-#ifdef CONFIG_RT_GROUP_SCHED
-	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
-	p->rt.parent = task_group(p)->rt_se[cpu];
-#endif
-	rcu_read_unlock();
-}
-
-#else
-
-static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
-static inline struct task_group *task_group(struct task_struct *p)
-{
-	return NULL;
-}
-
 #endif	/* CONFIG_CGROUP_SCHED */
 
 /* CFS-related fields in a runqueue */
@@ -644,6 +598,49 @@
 #define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
 #define raw_rq()		(&__raw_get_cpu_var(runqueues))
 
+#ifdef CONFIG_CGROUP_SCHED
+
+/*
+ * Return the group to which this tasks belongs.
+ *
+ * We use task_subsys_state_check() and extend the RCU verification
+ * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * holds that lock for each task it moves into the cgroup. Therefore
+ * by holding that lock, we pin the task to the current cgroup.
+ */
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	struct cgroup_subsys_state *css;
+
+	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
+			lockdep_is_held(&task_rq(p)->lock));
+	return container_of(css, struct task_group, css);
+}
+
+/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
+{
+#ifdef CONFIG_FAIR_GROUP_SCHED
+	p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
+	p->se.parent = task_group(p)->se[cpu];
+#endif
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	p->rt.rt_rq  = task_group(p)->rt_rq[cpu];
+	p->rt.parent = task_group(p)->rt_se[cpu];
+#endif
+}
+
+#else /* CONFIG_CGROUP_SCHED */
+
+static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
+static inline struct task_group *task_group(struct task_struct *p)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_CGROUP_SCHED */
+
 inline void update_rq_clock(struct rq *rq)
 {
 	if (!rq->skip_clock_update)
@@ -1257,6 +1254,12 @@
 	s64 period = sched_avg_period();
 
 	while ((s64)(rq->clock - rq->age_stamp) > period) {
+		/*
+		 * Inline assembly required to prevent the compiler
+		 * optimising this loop into a divmod call.
+		 * See __iter_div_u64_rem() for another example of this.
+		 */
+		asm("" : "+rm" (rq->age_stamp));
 		rq->age_stamp += period;
 		rq->rt_avg /= 2;
 	}
@@ -1660,9 +1663,6 @@
 
 static void update_h_load(long cpu)
 {
-	if (root_task_group_empty())
-		return;
-
 	walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
 }
 
@@ -2494,7 +2494,16 @@
 	if (p->sched_class->task_fork)
 		p->sched_class->task_fork(p);
 
+	/*
+	 * The child is not yet in the pid-hash so no cgroup attach races,
+	 * and the cgroup is pinned to this child due to cgroup_fork()
+	 * is ran before sched_fork().
+	 *
+	 * Silence PROVE_RCU.
+	 */
+	rcu_read_lock();
 	set_task_cpu(p, cpu);
+	rcu_read_unlock();
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
@@ -2864,9 +2873,9 @@
 	return sum;
 }
 
-unsigned long nr_iowait_cpu(void)
+unsigned long nr_iowait_cpu(int cpu)
 {
-	struct rq *this = this_rq();
+	struct rq *this = cpu_rq(cpu);
 	return atomic_read(&this->nr_iowait);
 }
 
@@ -4465,16 +4474,6 @@
 	}
 
 	if (user) {
-#ifdef CONFIG_RT_GROUP_SCHED
-		/*
-		 * Do not allow realtime tasks into groups that have no runtime
-		 * assigned.
-		 */
-		if (rt_bandwidth_enabled() && rt_policy(policy) &&
-				task_group(p)->rt_bandwidth.rt_runtime == 0)
-			return -EPERM;
-#endif
-
 		retval = security_task_setscheduler(p, policy, param);
 		if (retval)
 			return retval;
@@ -4490,6 +4489,22 @@
 	 * runqueue lock must be held.
 	 */
 	rq = __task_rq_lock(p);
+
+#ifdef CONFIG_RT_GROUP_SCHED
+	if (user) {
+		/*
+		 * Do not allow realtime tasks into groups that have no runtime
+		 * assigned.
+		 */
+		if (rt_bandwidth_enabled() && rt_policy(policy) &&
+				task_group(p)->rt_bandwidth.rt_runtime == 0) {
+			__task_rq_unlock(rq);
+			raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+			return -EPERM;
+		}
+	}
+#endif
+
 	/* recheck policy now with rq lock held */
 	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
 		policy = oldpolicy = -1;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index eed35ed..a878b53 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1240,6 +1240,7 @@
 	 * effect of the currently running task from the load
 	 * of the current CPU:
 	 */
+	rcu_read_lock();
 	if (sync) {
 		tg = task_group(current);
 		weight = current->se.load.weight;
@@ -1275,6 +1276,7 @@
 		balanced = this_eff_load <= prev_eff_load;
 	} else
 		balanced = true;
+	rcu_read_unlock();
 
 	/*
 	 * If the currently running task will sleep within
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 825e112..07b4f1b 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -850,7 +850,7 @@
 	void *cpu = (void *)(long)smp_processor_id();
 	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
 
-	BUG_ON(err == NOTIFY_BAD);
+	BUG_ON(err != NOTIFY_OK);
 	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
 	register_cpu_notifier(&cpu_nfb);
 	return 0;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 997080f..d24f761f 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1471,12 +1471,12 @@
 	},
 #endif
 	{
-		.procname	= "pipe-max-pages",
-		.data		= &pipe_max_pages,
+		.procname	= "pipe-max-size",
+		.data		= &pipe_max_size,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.extra1		= &two,
+		.proc_handler	= &pipe_proc_fn,
+		.extra1		= &pipe_min_size,
 	},
 /*
  * NOTE: do not add new entries to this table unless you have read
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1d7b9bc..813993b 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -154,14 +154,14 @@
  * Updates the per cpu time idle statistics counters
  */
 static void
-update_ts_time_stats(struct tick_sched *ts, ktime_t now, u64 *last_update_time)
+update_ts_time_stats(int cpu, struct tick_sched *ts, ktime_t now, u64 *last_update_time)
 {
 	ktime_t delta;
 
 	if (ts->idle_active) {
 		delta = ktime_sub(now, ts->idle_entrytime);
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
-		if (nr_iowait_cpu() > 0)
+		if (nr_iowait_cpu(cpu) > 0)
 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta);
 		ts->idle_entrytime = now;
 	}
@@ -175,19 +175,19 @@
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
 
-	update_ts_time_stats(ts, now, NULL);
+	update_ts_time_stats(cpu, ts, now, NULL);
 	ts->idle_active = 0;
 
 	sched_clock_idle_wakeup_event(0);
 }
 
-static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
+static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts)
 {
 	ktime_t now;
 
 	now = ktime_get();
 
-	update_ts_time_stats(ts, now, NULL);
+	update_ts_time_stats(cpu, ts, now, NULL);
 
 	ts->idle_entrytime = now;
 	ts->idle_active = 1;
@@ -216,7 +216,7 @@
 	if (!tick_nohz_enabled)
 		return -1;
 
-	update_ts_time_stats(ts, ktime_get(), last_update_time);
+	update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
 
 	return ktime_to_us(ts->idle_sleeptime);
 }
@@ -242,7 +242,7 @@
 	if (!tick_nohz_enabled)
 		return -1;
 
-	update_ts_time_stats(ts, ktime_get(), last_update_time);
+	update_ts_time_stats(cpu, ts, ktime_get(), last_update_time);
 
 	return ktime_to_us(ts->iowait_sleeptime);
 }
@@ -284,7 +284,7 @@
 	 */
 	ts->inidle = 1;
 
-	now = tick_nohz_start_idle(ts);
+	now = tick_nohz_start_idle(cpu, ts);
 
 	/*
 	 * If this cpu is offline and it is the one which updates
@@ -315,9 +315,6 @@
 		goto end;
 	}
 
-	if (nohz_ratelimit(cpu))
-		goto end;
-
 	ts->idle_calls++;
 	/* Read jiffies and the time when jiffies were updated last */
 	do {
@@ -328,7 +325,7 @@
 	} while (read_seqretry(&xtime_lock, seq));
 
 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
-	    arch_needs_cpu(cpu)) {
+	    arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
 	} else {
diff --git a/kernel/timer.c b/kernel/timer.c
index 2454172..ee305c8 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1717,7 +1717,7 @@
 
 	init_timer_stats();
 
-	BUG_ON(err == NOTIFY_BAD);
+	BUG_ON(err != NOTIFY_OK);
 	register_cpu_notifier(&timers_nb);
 	open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
 }
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index e6f6588..8a2b73f 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -96,7 +96,9 @@
 	mutex_lock(&event_mutex);
 	list_for_each_entry(tp_event, &ftrace_events, list) {
 		if (tp_event->event.type == event_id &&
-		    tp_event->class && tp_event->class->perf_probe &&
+		    tp_event->class &&
+		    (tp_event->class->perf_probe ||
+		     tp_event->class->reg) &&
 		    try_module_get(tp_event->mod)) {
 			ret = perf_trace_event_init(tp_event, p_event);
 			break;
diff --git a/lib/Kconfig b/lib/Kconfig
index 170d8ca..5b916bc 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -181,9 +181,6 @@
 config CHECK_SIGNATURE
 	bool
 
-config HAVE_LMB
-	boolean
-
 config CPUMASK_OFFSTACK
 	bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS
 	help
diff --git a/lib/Makefile b/lib/Makefile
index 3f1062c..0bfabba 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -89,8 +89,6 @@
 
 lib-$(CONFIG_GENERIC_BUG) += bug.o
 
-obj-$(CONFIG_HAVE_LMB) += lmb.o
-
 obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
 
 obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index 9087d71..44524cc 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -113,7 +113,8 @@
 	r += one;
 	BUG_ON(v.counter != r);
 
-#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(_ASM_GENERIC_ATOMIC64_H)
+#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+    defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H) || defined(CONFIG_ARM)
 	INIT(onestwos);
 	BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1));
 	r -= one;
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 3df8eb1..02afc25 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -692,7 +692,7 @@
  * Called in response to a module being unloaded.  Removes
  * any ddebug_table's which point at the module.
  */
-int ddebug_remove_module(char *mod_name)
+int ddebug_remove_module(const char *mod_name)
 {
 	struct ddebug_table *dt, *nextdt;
 	int ret = -ENOENT;
diff --git a/lib/genalloc.c b/lib/genalloc.c
index 736c3b0..1923f14 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -128,7 +128,6 @@
 		chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
 
 		end_bit = (chunk->end_addr - chunk->start_addr) >> order;
-		end_bit -= nbits + 1;
 
 		spin_lock_irqsave(&chunk->lock, flags);
 		start_bit = bitmap_find_next_zero_area(chunk->bits, end_bit, 0,
diff --git a/lib/idr.c b/lib/idr.c
index c1a2069..7f1a4f0 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -602,7 +602,7 @@
 	/* find first ent */
 	n = idp->layers * IDR_BITS;
 	max = 1 << n;
-	p = rcu_dereference(idp->top);
+	p = rcu_dereference_raw(idp->top);
 	if (!p)
 		return NULL;
 
@@ -610,7 +610,7 @@
 		while (n > 0 && p) {
 			n -= IDR_BITS;
 			*paa++ = p;
-			p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
+			p = rcu_dereference_raw(p->ary[(id >> n) & IDR_MASK]);
 		}
 
 		if (p) {
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 59c1551..b935795 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -83,6 +83,7 @@
 	return ret;
 }
 
+#ifdef CONFIG_NET
 static int kobj_bcast_filter(struct sock *dsk, struct sk_buff *skb, void *data)
 {
 	struct kobject *kobj = data;
@@ -98,6 +99,7 @@
 
 	return 0;
 }
+#endif
 
 static int kobj_usermode_filter(struct kobject *kobj)
 {
@@ -378,6 +380,7 @@
 	if (!ue_sk->sk) {
 		printk(KERN_ERR
 		       "kobject_uevent: unable to create netlink socket!\n");
+		kfree(ue_sk);
 		return -ENODEV;
 	}
 	mutex_lock(&uevent_sock_mutex);
diff --git a/lib/lmb.c b/lib/lmb.c
deleted file mode 100644
index b1fc526..0000000
--- a/lib/lmb.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp.	June 2001.
- * Copyright (C) 2001 Peter Bergner.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/lmb.h>
-
-#define LMB_ALLOC_ANYWHERE	0
-
-struct lmb lmb;
-
-static int lmb_debug;
-
-static int __init early_lmb(char *p)
-{
-	if (p && strstr(p, "debug"))
-		lmb_debug = 1;
-	return 0;
-}
-early_param("lmb", early_lmb);
-
-static void lmb_dump(struct lmb_region *region, char *name)
-{
-	unsigned long long base, size;
-	int i;
-
-	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
-
-	for (i = 0; i < region->cnt; i++) {
-		base = region->region[i].base;
-		size = region->region[i].size;
-
-		pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
-		    name, i, base, base + size - 1, size);
-	}
-}
-
-void lmb_dump_all(void)
-{
-	if (!lmb_debug)
-		return;
-
-	pr_info("LMB configuration:\n");
-	pr_info(" rmo_size    = 0x%llx\n", (unsigned long long)lmb.rmo_size);
-	pr_info(" memory.size = 0x%llx\n", (unsigned long long)lmb.memory.size);
-
-	lmb_dump(&lmb.memory, "memory");
-	lmb_dump(&lmb.reserved, "reserved");
-}
-
-static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,
-					u64 size2)
-{
-	return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
-}
-
-static long lmb_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
-{
-	if (base2 == base1 + size1)
-		return 1;
-	else if (base1 == base2 + size2)
-		return -1;
-
-	return 0;
-}
-
-static long lmb_regions_adjacent(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	u64 base1 = rgn->region[r1].base;
-	u64 size1 = rgn->region[r1].size;
-	u64 base2 = rgn->region[r2].base;
-	u64 size2 = rgn->region[r2].size;
-
-	return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
-	unsigned long i;
-
-	for (i = r; i < rgn->cnt - 1; i++) {
-		rgn->region[i].base = rgn->region[i + 1].base;
-		rgn->region[i].size = rgn->region[i + 1].size;
-	}
-	rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void lmb_coalesce_regions(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	rgn->region[r1].size += rgn->region[r2].size;
-	lmb_remove_region(rgn, r2);
-}
-
-void __init lmb_init(void)
-{
-	/* Create a dummy zero size LMB which will get coalesced away later.
-	 * This simplifies the lmb_add() code below...
-	 */
-	lmb.memory.region[0].base = 0;
-	lmb.memory.region[0].size = 0;
-	lmb.memory.cnt = 1;
-
-	/* Ditto. */
-	lmb.reserved.region[0].base = 0;
-	lmb.reserved.region[0].size = 0;
-	lmb.reserved.cnt = 1;
-}
-
-void __init lmb_analyze(void)
-{
-	int i;
-
-	lmb.memory.size = 0;
-
-	for (i = 0; i < lmb.memory.cnt; i++)
-		lmb.memory.size += lmb.memory.region[i].size;
-}
-
-static long lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
-{
-	unsigned long coalesced = 0;
-	long adjacent, i;
-
-	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
-		rgn->region[0].base = base;
-		rgn->region[0].size = size;
-		return 0;
-	}
-
-	/* First try and coalesce this LMB with another. */
-	for (i = 0; i < rgn->cnt; i++) {
-		u64 rgnbase = rgn->region[i].base;
-		u64 rgnsize = rgn->region[i].size;
-
-		if ((rgnbase == base) && (rgnsize == size))
-			/* Already have this region, so we're done */
-			return 0;
-
-		adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
-		if (adjacent > 0) {
-			rgn->region[i].base -= size;
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		} else if (adjacent < 0) {
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		}
-	}
-
-	if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
-		lmb_coalesce_regions(rgn, i, i+1);
-		coalesced++;
-	}
-
-	if (coalesced)
-		return coalesced;
-	if (rgn->cnt >= MAX_LMB_REGIONS)
-		return -1;
-
-	/* Couldn't coalesce the LMB, so add it to the sorted table. */
-	for (i = rgn->cnt - 1; i >= 0; i--) {
-		if (base < rgn->region[i].base) {
-			rgn->region[i+1].base = rgn->region[i].base;
-			rgn->region[i+1].size = rgn->region[i].size;
-		} else {
-			rgn->region[i+1].base = base;
-			rgn->region[i+1].size = size;
-			break;
-		}
-	}
-
-	if (base < rgn->region[0].base) {
-		rgn->region[0].base = base;
-		rgn->region[0].size = size;
-	}
-	rgn->cnt++;
-
-	return 0;
-}
-
-long lmb_add(u64 base, u64 size)
-{
-	struct lmb_region *_rgn = &lmb.memory;
-
-	/* On pSeries LPAR systems, the first LMB is our RMO region. */
-	if (base == 0)
-		lmb.rmo_size = size;
-
-	return lmb_add_region(_rgn, base, size);
-
-}
-
-static long __lmb_remove(struct lmb_region *rgn, u64 base, u64 size)
-{
-	u64 rgnbegin, rgnend;
-	u64 end = base + size;
-	int i;
-
-	rgnbegin = rgnend = 0; /* supress gcc warnings */
-
-	/* Find the region where (base, size) belongs to */
-	for (i=0; i < rgn->cnt; i++) {
-		rgnbegin = rgn->region[i].base;
-		rgnend = rgnbegin + rgn->region[i].size;
-
-		if ((rgnbegin <= base) && (end <= rgnend))
-			break;
-	}
-
-	/* Didn't find the region */
-	if (i == rgn->cnt)
-		return -1;
-
-	/* Check to see if we are removing entire region */
-	if ((rgnbegin == base) && (rgnend == end)) {
-		lmb_remove_region(rgn, i);
-		return 0;
-	}
-
-	/* Check to see if region is matching at the front */
-	if (rgnbegin == base) {
-		rgn->region[i].base = end;
-		rgn->region[i].size -= size;
-		return 0;
-	}
-
-	/* Check to see if the region is matching at the end */
-	if (rgnend == end) {
-		rgn->region[i].size -= size;
-		return 0;
-	}
-
-	/*
-	 * We need to split the entry -  adjust the current one to the
-	 * beginging of the hole and add the region after hole.
-	 */
-	rgn->region[i].size = base - rgn->region[i].base;
-	return lmb_add_region(rgn, end, rgnend - end);
-}
-
-long lmb_remove(u64 base, u64 size)
-{
-	return __lmb_remove(&lmb.memory, base, size);
-}
-
-long __init lmb_free(u64 base, u64 size)
-{
-	return __lmb_remove(&lmb.reserved, base, size);
-}
-
-long __init lmb_reserve(u64 base, u64 size)
-{
-	struct lmb_region *_rgn = &lmb.reserved;
-
-	BUG_ON(0 == size);
-
-	return lmb_add_region(_rgn, base, size);
-}
-
-long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
-{
-	unsigned long i;
-
-	for (i = 0; i < rgn->cnt; i++) {
-		u64 rgnbase = rgn->region[i].base;
-		u64 rgnsize = rgn->region[i].size;
-		if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
-			break;
-	}
-
-	return (i < rgn->cnt) ? i : -1;
-}
-
-static u64 lmb_align_down(u64 addr, u64 size)
-{
-	return addr & ~(size - 1);
-}
-
-static u64 lmb_align_up(u64 addr, u64 size)
-{
-	return (addr + (size - 1)) & ~(size - 1);
-}
-
-static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
-					   u64 size, u64 align)
-{
-	u64 base, res_base;
-	long j;
-
-	base = lmb_align_down((end - size), align);
-	while (start <= base) {
-		j = lmb_overlaps_region(&lmb.reserved, base, size);
-		if (j < 0) {
-			/* this area isn't reserved, take it */
-			if (lmb_add_region(&lmb.reserved, base, size) < 0)
-				base = ~(u64)0;
-			return base;
-		}
-		res_base = lmb.reserved.region[j].base;
-		if (res_base < size)
-			break;
-		base = lmb_align_down(res_base - size, align);
-	}
-
-	return ~(u64)0;
-}
-
-static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
-				       u64 (*nid_range)(u64, u64, int *),
-				       u64 size, u64 align, int nid)
-{
-	u64 start, end;
-
-	start = mp->base;
-	end = start + mp->size;
-
-	start = lmb_align_up(start, align);
-	while (start < end) {
-		u64 this_end;
-		int this_nid;
-
-		this_end = nid_range(start, end, &this_nid);
-		if (this_nid == nid) {
-			u64 ret = lmb_alloc_nid_unreserved(start, this_end,
-							   size, align);
-			if (ret != ~(u64)0)
-				return ret;
-		}
-		start = this_end;
-	}
-
-	return ~(u64)0;
-}
-
-u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
-			 u64 (*nid_range)(u64 start, u64 end, int *nid))
-{
-	struct lmb_region *mem = &lmb.memory;
-	int i;
-
-	BUG_ON(0 == size);
-
-	size = lmb_align_up(size, align);
-
-	for (i = 0; i < mem->cnt; i++) {
-		u64 ret = lmb_alloc_nid_region(&mem->region[i],
-					       nid_range,
-					       size, align, nid);
-		if (ret != ~(u64)0)
-			return ret;
-	}
-
-	return lmb_alloc(size, align);
-}
-
-u64 __init lmb_alloc(u64 size, u64 align)
-{
-	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
-	u64 alloc;
-
-	alloc = __lmb_alloc_base(size, align, max_addr);
-
-	if (alloc == 0)
-		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
-		      (unsigned long long) size, (unsigned long long) max_addr);
-
-	return alloc;
-}
-
-u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
-{
-	long i, j;
-	u64 base = 0;
-	u64 res_base;
-
-	BUG_ON(0 == size);
-
-	size = lmb_align_up(size, align);
-
-	/* On some platforms, make sure we allocate lowmem */
-	/* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
-	if (max_addr == LMB_ALLOC_ANYWHERE)
-		max_addr = LMB_REAL_LIMIT;
-
-	for (i = lmb.memory.cnt - 1; i >= 0; i--) {
-		u64 lmbbase = lmb.memory.region[i].base;
-		u64 lmbsize = lmb.memory.region[i].size;
-
-		if (lmbsize < size)
-			continue;
-		if (max_addr == LMB_ALLOC_ANYWHERE)
-			base = lmb_align_down(lmbbase + lmbsize - size, align);
-		else if (lmbbase < max_addr) {
-			base = min(lmbbase + lmbsize, max_addr);
-			base = lmb_align_down(base - size, align);
-		} else
-			continue;
-
-		while (base && lmbbase <= base) {
-			j = lmb_overlaps_region(&lmb.reserved, base, size);
-			if (j < 0) {
-				/* this area isn't reserved, take it */
-				if (lmb_add_region(&lmb.reserved, base, size) < 0)
-					return 0;
-				return base;
-			}
-			res_base = lmb.reserved.region[j].base;
-			if (res_base < size)
-				break;
-			base = lmb_align_down(res_base - size, align);
-		}
-	}
-	return 0;
-}
-
-/* You must call lmb_analyze() before this. */
-u64 __init lmb_phys_mem_size(void)
-{
-	return lmb.memory.size;
-}
-
-u64 lmb_end_of_DRAM(void)
-{
-	int idx = lmb.memory.cnt - 1;
-
-	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(u64 memory_limit)
-{
-	unsigned long i;
-	u64 limit;
-	struct lmb_property *p;
-
-	if (!memory_limit)
-		return;
-
-	/* Truncate the lmb regions to satisfy the memory limit. */
-	limit = memory_limit;
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		if (limit > lmb.memory.region[i].size) {
-			limit -= lmb.memory.region[i].size;
-			continue;
-		}
-
-		lmb.memory.region[i].size = limit;
-		lmb.memory.cnt = i + 1;
-		break;
-	}
-
-	if (lmb.memory.region[0].size < lmb.rmo_size)
-		lmb.rmo_size = lmb.memory.region[0].size;
-
-	memory_limit = lmb_end_of_DRAM();
-
-	/* And truncate any reserves above the limit also. */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		p = &lmb.reserved.region[i];
-
-		if (p->base > memory_limit)
-			p->size = 0;
-		else if ((p->base + p->size) > memory_limit)
-			p->size = memory_limit - p->base;
-
-		if (p->size == 0) {
-			lmb_remove_region(&lmb.reserved, i);
-			i--;
-		}
-	}
-}
-
-int __init lmb_is_reserved(u64 addr)
-{
-	int i;
-
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		u64 upper = lmb.reserved.region[i].base +
-			lmb.reserved.region[i].size - 1;
-		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
-			return 1;
-	}
-	return 0;
-}
-
-int lmb_is_region_reserved(u64 base, u64 size)
-{
-	return lmb_overlaps_region(&lmb.reserved, base, size);
-}
-
-/*
- * Given a <base, len>, find which memory regions belong to this range.
- * Adjust the request and return a contiguous chunk.
- */
-int lmb_find(struct lmb_property *res)
-{
-	int i;
-	u64 rstart, rend;
-
-	rstart = res->base;
-	rend = rstart + res->size - 1;
-
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		u64 start = lmb.memory.region[i].base;
-		u64 end = start + lmb.memory.region[i].size - 1;
-
-		if (start > rend)
-			return -1;
-
-		if ((end >= rstart) && (start < rend)) {
-			/* adjust the request */
-			if (rstart < start)
-				rstart = start;
-			if (rend > end)
-				rend = end;
-			res->base = rstart;
-			res->size = rend - rstart + 1;
-			return 0;
-		}
-	}
-	return -1;
-}
diff --git a/lib/rbtree.c b/lib/rbtree.c
index 15e10b1..4693f79 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -44,11 +44,6 @@
 	else
 		root->rb_node = right;
 	rb_set_parent(node, right);
-
-	if (root->augment_cb) {
-		root->augment_cb(node);
-		root->augment_cb(right);
-	}
 }
 
 static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
@@ -72,20 +67,12 @@
 	else
 		root->rb_node = left;
 	rb_set_parent(node, left);
-
-	if (root->augment_cb) {
-		root->augment_cb(node);
-		root->augment_cb(left);
-	}
 }
 
 void rb_insert_color(struct rb_node *node, struct rb_root *root)
 {
 	struct rb_node *parent, *gparent;
 
-	if (root->augment_cb)
-		root->augment_cb(node);
-
 	while ((parent = rb_parent(node)) && rb_is_red(parent))
 	{
 		gparent = rb_parent(parent);
@@ -240,15 +227,12 @@
 	else
 	{
 		struct rb_node *old = node, *left;
-		int old_parent_cb = 0;
-		int successor_parent_cb = 0;
 
 		node = node->rb_right;
 		while ((left = node->rb_left) != NULL)
 			node = left;
 
 		if (rb_parent(old)) {
-			old_parent_cb = 1;
 			if (rb_parent(old)->rb_left == old)
 				rb_parent(old)->rb_left = node;
 			else
@@ -263,10 +247,8 @@
 		if (parent == old) {
 			parent = node;
 		} else {
-			successor_parent_cb = 1;
 			if (child)
 				rb_set_parent(child, parent);
-
 			parent->rb_left = child;
 
 			node->rb_right = old->rb_right;
@@ -277,24 +259,6 @@
 		node->rb_left = old->rb_left;
 		rb_set_parent(old->rb_left, node);
 
-		if (root->augment_cb) {
-			/*
-			 * Here, three different nodes can have new children.
-			 * The parent of the successor node that was selected
-			 * to replace the node to be erased.
-			 * The node that is getting erased and is now replaced
-			 * by its successor.
-			 * The parent of the node getting erased-replaced.
-			 */
-			if (successor_parent_cb)
-				root->augment_cb(parent);
-
-			root->augment_cb(node);
-
-			if (old_parent_cb)
-				root->augment_cb(rb_parent(old));
-		}
-
 		goto color;
 	}
 
@@ -303,19 +267,15 @@
 
 	if (child)
 		rb_set_parent(child, parent);
-
-	if (parent) {
+	if (parent)
+	{
 		if (parent->rb_left == node)
 			parent->rb_left = child;
 		else
 			parent->rb_right = child;
-
-		if (root->augment_cb)
-			root->augment_cb(parent);
-
-	} else {
-		root->rb_node = child;
 	}
+	else
+		root->rb_node = child;
 
  color:
 	if (color == RB_BLACK)
@@ -323,6 +283,74 @@
 }
 EXPORT_SYMBOL(rb_erase);
 
+static void rb_augment_path(struct rb_node *node, rb_augment_f func, void *data)
+{
+	struct rb_node *parent;
+
+up:
+	func(node, data);
+	parent = rb_parent(node);
+	if (!parent)
+		return;
+
+	if (node == parent->rb_left && parent->rb_right)
+		func(parent->rb_right, data);
+	else if (parent->rb_left)
+		func(parent->rb_left, data);
+
+	node = parent;
+	goto up;
+}
+
+/*
+ * after inserting @node into the tree, update the tree to account for
+ * both the new entry and any damage done by rebalance
+ */
+void rb_augment_insert(struct rb_node *node, rb_augment_f func, void *data)
+{
+	if (node->rb_left)
+		node = node->rb_left;
+	else if (node->rb_right)
+		node = node->rb_right;
+
+	rb_augment_path(node, func, data);
+}
+
+/*
+ * before removing the node, find the deepest node on the rebalance path
+ * that will still be there after @node gets removed
+ */
+struct rb_node *rb_augment_erase_begin(struct rb_node *node)
+{
+	struct rb_node *deepest;
+
+	if (!node->rb_right && !node->rb_left)
+		deepest = rb_parent(node);
+	else if (!node->rb_right)
+		deepest = node->rb_left;
+	else if (!node->rb_left)
+		deepest = node->rb_right;
+	else {
+		deepest = rb_next(node);
+		if (deepest->rb_right)
+			deepest = deepest->rb_right;
+		else if (rb_parent(deepest) != node)
+			deepest = rb_parent(deepest);
+	}
+
+	return deepest;
+}
+
+/*
+ * after removal, update the tree to account for the removed entry
+ * and any rebalance damage.
+ */
+void rb_augment_erase_end(struct rb_node *node, rb_augment_f func, void *data)
+{
+	if (node)
+		rb_augment_path(node, func, data);
+}
+
 /*
  * This function returns the first node (in sort order) of the tree.
  */
diff --git a/mm/Kconfig b/mm/Kconfig
index 527136b..f4e516e 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -128,6 +128,9 @@
 	 pfn_to_page and page_to_pfn operations.  This is the most
 	 efficient option when sufficient kernel resources are available.
 
+config HAVE_MEMBLOCK
+	boolean
+
 # eventually, we can have this option just 'select SPARSEMEM'
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
diff --git a/mm/Makefile b/mm/Makefile
index 8982504..34b2546 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -15,6 +15,8 @@
 			   $(mmu-y)
 obj-y += init-mm.o
 
+obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
+
 obj-$(CONFIG_BOUNCE)	+= bounce.o
 obj-$(CONFIG_SWAP)	+= page_io.o swap_state.o swapfile.o thrash.o
 obj-$(CONFIG_HAS_DMA)	+= dmapool.o
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 660a87a..123bcef 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -104,15 +104,13 @@
 		   "b_more_io:        %8lu\n"
 		   "bdi_list:         %8u\n"
 		   "state:            %8lx\n"
-		   "wb_mask:          %8lx\n"
-		   "wb_list:          %8u\n"
-		   "wb_cnt:           %8u\n",
+		   "wb_list:          %8u\n",
 		   (unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
 		   (unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
 		   K(bdi_thresh), K(dirty_thresh),
 		   K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
-		   !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
-		   !list_empty(&bdi->wb_list), bdi->wb_cnt);
+		   !list_empty(&bdi->bdi_list), bdi->state,
+		   !list_empty(&bdi->wb_list));
 #undef K
 
 	return 0;
@@ -340,14 +338,13 @@
 static void bdi_flush_io(struct backing_dev_info *bdi)
 {
 	struct writeback_control wbc = {
-		.bdi			= bdi,
 		.sync_mode		= WB_SYNC_NONE,
 		.older_than_this	= NULL,
 		.range_cyclic		= 1,
 		.nr_to_write		= 1024,
 	};
 
-	writeback_inodes_wbc(&wbc);
+	writeback_inodes_wb(&bdi->wb, &wbc);
 }
 
 /*
@@ -675,12 +672,6 @@
 
 	bdi_wb_init(&bdi->wb, bdi);
 
-	/*
-	 * Just one thread support for now, hard code mask and count
-	 */
-	bdi->wb_mask = 1;
-	bdi->wb_cnt = 1;
-
 	for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
 		err = percpu_counter_init(&bdi->bdi_stat[i], 0);
 		if (err)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 58c66cc..142c84a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -833,15 +833,24 @@
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+					 goal, -1ULL);
+	if (ptr)
+		return ptr;
+
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 					 goal, -1ULL);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
 #endif
+
+	return ptr;
 }
 
 void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
+	void *ptr;
+
 	if (WARN_ON_ONCE(slab_is_available()))
 		return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
 
 #ifdef CONFIG_NO_BOOTMEM
-	return __alloc_memory_core_early(pgdat->node_id, size, align,
+	ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+				goal, ARCH_LOW_ADDRESS_LIMIT);
+	if (ptr)
+		return ptr;
+	ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #else
-	return ___alloc_bootmem_node(pgdat->bdata, size, align,
+	ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
 				goal, ARCH_LOW_ADDRESS_LIMIT);
 #endif
+	return ptr;
 }
diff --git a/mm/memblock.c b/mm/memblock.c
new file mode 100644
index 0000000..3024eb3
--- /dev/null
+++ b/mm/memblock.c
@@ -0,0 +1,541 @@
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp.	June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/memblock.h>
+
+#define MEMBLOCK_ALLOC_ANYWHERE	0
+
+struct memblock memblock;
+
+static int memblock_debug;
+
+static int __init early_memblock(char *p)
+{
+	if (p && strstr(p, "debug"))
+		memblock_debug = 1;
+	return 0;
+}
+early_param("memblock", early_memblock);
+
+static void memblock_dump(struct memblock_region *region, char *name)
+{
+	unsigned long long base, size;
+	int i;
+
+	pr_info(" %s.cnt  = 0x%lx\n", name, region->cnt);
+
+	for (i = 0; i < region->cnt; i++) {
+		base = region->region[i].base;
+		size = region->region[i].size;
+
+		pr_info(" %s[0x%x]\t0x%016llx - 0x%016llx, 0x%llx bytes\n",
+		    name, i, base, base + size - 1, size);
+	}
+}
+
+void memblock_dump_all(void)
+{
+	if (!memblock_debug)
+		return;
+
+	pr_info("MEMBLOCK configuration:\n");
+	pr_info(" rmo_size    = 0x%llx\n", (unsigned long long)memblock.rmo_size);
+	pr_info(" memory.size = 0x%llx\n", (unsigned long long)memblock.memory.size);
+
+	memblock_dump(&memblock.memory, "memory");
+	memblock_dump(&memblock.reserved, "reserved");
+}
+
+static unsigned long memblock_addrs_overlap(u64 base1, u64 size1, u64 base2,
+					u64 size2)
+{
+	return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
+}
+
+static long memblock_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
+{
+	if (base2 == base1 + size1)
+		return 1;
+	else if (base1 == base2 + size2)
+		return -1;
+
+	return 0;
+}
+
+static long memblock_regions_adjacent(struct memblock_region *rgn,
+		unsigned long r1, unsigned long r2)
+{
+	u64 base1 = rgn->region[r1].base;
+	u64 size1 = rgn->region[r1].size;
+	u64 base2 = rgn->region[r2].base;
+	u64 size2 = rgn->region[r2].size;
+
+	return memblock_addrs_adjacent(base1, size1, base2, size2);
+}
+
+static void memblock_remove_region(struct memblock_region *rgn, unsigned long r)
+{
+	unsigned long i;
+
+	for (i = r; i < rgn->cnt - 1; i++) {
+		rgn->region[i].base = rgn->region[i + 1].base;
+		rgn->region[i].size = rgn->region[i + 1].size;
+	}
+	rgn->cnt--;
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void memblock_coalesce_regions(struct memblock_region *rgn,
+		unsigned long r1, unsigned long r2)
+{
+	rgn->region[r1].size += rgn->region[r2].size;
+	memblock_remove_region(rgn, r2);
+}
+
+void __init memblock_init(void)
+{
+	/* Create a dummy zero size MEMBLOCK which will get coalesced away later.
+	 * This simplifies the memblock_add() code below...
+	 */
+	memblock.memory.region[0].base = 0;
+	memblock.memory.region[0].size = 0;
+	memblock.memory.cnt = 1;
+
+	/* Ditto. */
+	memblock.reserved.region[0].base = 0;
+	memblock.reserved.region[0].size = 0;
+	memblock.reserved.cnt = 1;
+}
+
+void __init memblock_analyze(void)
+{
+	int i;
+
+	memblock.memory.size = 0;
+
+	for (i = 0; i < memblock.memory.cnt; i++)
+		memblock.memory.size += memblock.memory.region[i].size;
+}
+
+static long memblock_add_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+	unsigned long coalesced = 0;
+	long adjacent, i;
+
+	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+		return 0;
+	}
+
+	/* First try and coalesce this MEMBLOCK with another. */
+	for (i = 0; i < rgn->cnt; i++) {
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
+
+		if ((rgnbase == base) && (rgnsize == size))
+			/* Already have this region, so we're done */
+			return 0;
+
+		adjacent = memblock_addrs_adjacent(base, size, rgnbase, rgnsize);
+		if (adjacent > 0) {
+			rgn->region[i].base -= size;
+			rgn->region[i].size += size;
+			coalesced++;
+			break;
+		} else if (adjacent < 0) {
+			rgn->region[i].size += size;
+			coalesced++;
+			break;
+		}
+	}
+
+	if ((i < rgn->cnt - 1) && memblock_regions_adjacent(rgn, i, i+1)) {
+		memblock_coalesce_regions(rgn, i, i+1);
+		coalesced++;
+	}
+
+	if (coalesced)
+		return coalesced;
+	if (rgn->cnt >= MAX_MEMBLOCK_REGIONS)
+		return -1;
+
+	/* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */
+	for (i = rgn->cnt - 1; i >= 0; i--) {
+		if (base < rgn->region[i].base) {
+			rgn->region[i+1].base = rgn->region[i].base;
+			rgn->region[i+1].size = rgn->region[i].size;
+		} else {
+			rgn->region[i+1].base = base;
+			rgn->region[i+1].size = size;
+			break;
+		}
+	}
+
+	if (base < rgn->region[0].base) {
+		rgn->region[0].base = base;
+		rgn->region[0].size = size;
+	}
+	rgn->cnt++;
+
+	return 0;
+}
+
+long memblock_add(u64 base, u64 size)
+{
+	struct memblock_region *_rgn = &memblock.memory;
+
+	/* On pSeries LPAR systems, the first MEMBLOCK is our RMO region. */
+	if (base == 0)
+		memblock.rmo_size = size;
+
+	return memblock_add_region(_rgn, base, size);
+
+}
+
+static long __memblock_remove(struct memblock_region *rgn, u64 base, u64 size)
+{
+	u64 rgnbegin, rgnend;
+	u64 end = base + size;
+	int i;
+
+	rgnbegin = rgnend = 0; /* supress gcc warnings */
+
+	/* Find the region where (base, size) belongs to */
+	for (i=0; i < rgn->cnt; i++) {
+		rgnbegin = rgn->region[i].base;
+		rgnend = rgnbegin + rgn->region[i].size;
+
+		if ((rgnbegin <= base) && (end <= rgnend))
+			break;
+	}
+
+	/* Didn't find the region */
+	if (i == rgn->cnt)
+		return -1;
+
+	/* Check to see if we are removing entire region */
+	if ((rgnbegin == base) && (rgnend == end)) {
+		memblock_remove_region(rgn, i);
+		return 0;
+	}
+
+	/* Check to see if region is matching at the front */
+	if (rgnbegin == base) {
+		rgn->region[i].base = end;
+		rgn->region[i].size -= size;
+		return 0;
+	}
+
+	/* Check to see if the region is matching at the end */
+	if (rgnend == end) {
+		rgn->region[i].size -= size;
+		return 0;
+	}
+
+	/*
+	 * We need to split the entry -  adjust the current one to the
+	 * beginging of the hole and add the region after hole.
+	 */
+	rgn->region[i].size = base - rgn->region[i].base;
+	return memblock_add_region(rgn, end, rgnend - end);
+}
+
+long memblock_remove(u64 base, u64 size)
+{
+	return __memblock_remove(&memblock.memory, base, size);
+}
+
+long __init memblock_free(u64 base, u64 size)
+{
+	return __memblock_remove(&memblock.reserved, base, size);
+}
+
+long __init memblock_reserve(u64 base, u64 size)
+{
+	struct memblock_region *_rgn = &memblock.reserved;
+
+	BUG_ON(0 == size);
+
+	return memblock_add_region(_rgn, base, size);
+}
+
+long memblock_overlaps_region(struct memblock_region *rgn, u64 base, u64 size)
+{
+	unsigned long i;
+
+	for (i = 0; i < rgn->cnt; i++) {
+		u64 rgnbase = rgn->region[i].base;
+		u64 rgnsize = rgn->region[i].size;
+		if (memblock_addrs_overlap(base, size, rgnbase, rgnsize))
+			break;
+	}
+
+	return (i < rgn->cnt) ? i : -1;
+}
+
+static u64 memblock_align_down(u64 addr, u64 size)
+{
+	return addr & ~(size - 1);
+}
+
+static u64 memblock_align_up(u64 addr, u64 size)
+{
+	return (addr + (size - 1)) & ~(size - 1);
+}
+
+static u64 __init memblock_alloc_nid_unreserved(u64 start, u64 end,
+					   u64 size, u64 align)
+{
+	u64 base, res_base;
+	long j;
+
+	base = memblock_align_down((end - size), align);
+	while (start <= base) {
+		j = memblock_overlaps_region(&memblock.reserved, base, size);
+		if (j < 0) {
+			/* this area isn't reserved, take it */
+			if (memblock_add_region(&memblock.reserved, base, size) < 0)
+				base = ~(u64)0;
+			return base;
+		}
+		res_base = memblock.reserved.region[j].base;
+		if (res_base < size)
+			break;
+		base = memblock_align_down(res_base - size, align);
+	}
+
+	return ~(u64)0;
+}
+
+static u64 __init memblock_alloc_nid_region(struct memblock_property *mp,
+				       u64 (*nid_range)(u64, u64, int *),
+				       u64 size, u64 align, int nid)
+{
+	u64 start, end;
+
+	start = mp->base;
+	end = start + mp->size;
+
+	start = memblock_align_up(start, align);
+	while (start < end) {
+		u64 this_end;
+		int this_nid;
+
+		this_end = nid_range(start, end, &this_nid);
+		if (this_nid == nid) {
+			u64 ret = memblock_alloc_nid_unreserved(start, this_end,
+							   size, align);
+			if (ret != ~(u64)0)
+				return ret;
+		}
+		start = this_end;
+	}
+
+	return ~(u64)0;
+}
+
+u64 __init memblock_alloc_nid(u64 size, u64 align, int nid,
+			 u64 (*nid_range)(u64 start, u64 end, int *nid))
+{
+	struct memblock_region *mem = &memblock.memory;
+	int i;
+
+	BUG_ON(0 == size);
+
+	size = memblock_align_up(size, align);
+
+	for (i = 0; i < mem->cnt; i++) {
+		u64 ret = memblock_alloc_nid_region(&mem->region[i],
+					       nid_range,
+					       size, align, nid);
+		if (ret != ~(u64)0)
+			return ret;
+	}
+
+	return memblock_alloc(size, align);
+}
+
+u64 __init memblock_alloc(u64 size, u64 align)
+{
+	return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE);
+}
+
+u64 __init memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+	u64 alloc;
+
+	alloc = __memblock_alloc_base(size, align, max_addr);
+
+	if (alloc == 0)
+		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+		      (unsigned long long) size, (unsigned long long) max_addr);
+
+	return alloc;
+}
+
+u64 __init __memblock_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+	long i, j;
+	u64 base = 0;
+	u64 res_base;
+
+	BUG_ON(0 == size);
+
+	size = memblock_align_up(size, align);
+
+	/* On some platforms, make sure we allocate lowmem */
+	/* Note that MEMBLOCK_REAL_LIMIT may be MEMBLOCK_ALLOC_ANYWHERE */
+	if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+		max_addr = MEMBLOCK_REAL_LIMIT;
+
+	for (i = memblock.memory.cnt - 1; i >= 0; i--) {
+		u64 memblockbase = memblock.memory.region[i].base;
+		u64 memblocksize = memblock.memory.region[i].size;
+
+		if (memblocksize < size)
+			continue;
+		if (max_addr == MEMBLOCK_ALLOC_ANYWHERE)
+			base = memblock_align_down(memblockbase + memblocksize - size, align);
+		else if (memblockbase < max_addr) {
+			base = min(memblockbase + memblocksize, max_addr);
+			base = memblock_align_down(base - size, align);
+		} else
+			continue;
+
+		while (base && memblockbase <= base) {
+			j = memblock_overlaps_region(&memblock.reserved, base, size);
+			if (j < 0) {
+				/* this area isn't reserved, take it */
+				if (memblock_add_region(&memblock.reserved, base, size) < 0)
+					return 0;
+				return base;
+			}
+			res_base = memblock.reserved.region[j].base;
+			if (res_base < size)
+				break;
+			base = memblock_align_down(res_base - size, align);
+		}
+	}
+	return 0;
+}
+
+/* You must call memblock_analyze() before this. */
+u64 __init memblock_phys_mem_size(void)
+{
+	return memblock.memory.size;
+}
+
+u64 memblock_end_of_DRAM(void)
+{
+	int idx = memblock.memory.cnt - 1;
+
+	return (memblock.memory.region[idx].base + memblock.memory.region[idx].size);
+}
+
+/* You must call memblock_analyze() after this. */
+void __init memblock_enforce_memory_limit(u64 memory_limit)
+{
+	unsigned long i;
+	u64 limit;
+	struct memblock_property *p;
+
+	if (!memory_limit)
+		return;
+
+	/* Truncate the memblock regions to satisfy the memory limit. */
+	limit = memory_limit;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		if (limit > memblock.memory.region[i].size) {
+			limit -= memblock.memory.region[i].size;
+			continue;
+		}
+
+		memblock.memory.region[i].size = limit;
+		memblock.memory.cnt = i + 1;
+		break;
+	}
+
+	if (memblock.memory.region[0].size < memblock.rmo_size)
+		memblock.rmo_size = memblock.memory.region[0].size;
+
+	memory_limit = memblock_end_of_DRAM();
+
+	/* And truncate any reserves above the limit also. */
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		p = &memblock.reserved.region[i];
+
+		if (p->base > memory_limit)
+			p->size = 0;
+		else if ((p->base + p->size) > memory_limit)
+			p->size = memory_limit - p->base;
+
+		if (p->size == 0) {
+			memblock_remove_region(&memblock.reserved, i);
+			i--;
+		}
+	}
+}
+
+int __init memblock_is_reserved(u64 addr)
+{
+	int i;
+
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		u64 upper = memblock.reserved.region[i].base +
+			memblock.reserved.region[i].size - 1;
+		if ((addr >= memblock.reserved.region[i].base) && (addr <= upper))
+			return 1;
+	}
+	return 0;
+}
+
+int memblock_is_region_reserved(u64 base, u64 size)
+{
+	return memblock_overlaps_region(&memblock.reserved, base, size);
+}
+
+/*
+ * Given a <base, len>, find which memory regions belong to this range.
+ * Adjust the request and return a contiguous chunk.
+ */
+int memblock_find(struct memblock_property *res)
+{
+	int i;
+	u64 rstart, rend;
+
+	rstart = res->base;
+	rend = rstart + res->size - 1;
+
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		u64 start = memblock.memory.region[i].base;
+		u64 end = start + memblock.memory.region[i].size - 1;
+
+		if (start > rend)
+			return -1;
+
+		if ((end >= rstart) && (start < rend)) {
+			/* adjust the request */
+			if (rstart < start)
+				rstart = start;
+			if (rend > end)
+				rend = end;
+			res->base = rstart;
+			res->size = rend - rstart + 1;
+			return 0;
+		}
+	}
+	return -1;
+}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c6ece0a..20a8193a 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1370,7 +1370,7 @@
 
 static void memcg_oom_recover(struct mem_cgroup *mem)
 {
-	if (mem->oom_kill_disable && atomic_read(&mem->oom_lock))
+	if (atomic_read(&mem->oom_lock))
 		memcg_wakeup_oom(mem);
 }
 
@@ -3781,6 +3781,8 @@
 		return -EINVAL;
 	}
 	mem->oom_kill_disable = val;
+	if (!val)
+		memcg_oom_recover(mem);
 	cgroup_unlock();
 	return 0;
 }
diff --git a/mm/memory.c b/mm/memory.c
index 119b7cc..bde42c6 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1394,10 +1394,20 @@
 				return i ? : -EFAULT;
 			}
 			if (pages) {
-				struct page *page = vm_normal_page(gate_vma, start, *pte);
+				struct page *page;
+
+				page = vm_normal_page(gate_vma, start, *pte);
+				if (!page) {
+					if (!(gup_flags & FOLL_DUMP) &&
+					     is_zero_pfn(pte_pfn(*pte)))
+						page = pte_page(*pte);
+					else {
+						pte_unmap(pte);
+						return i ? : -EFAULT;
+					}
+				}
 				pages[i] = page;
-				if (page)
-					get_page(page);
+				get_page(page);
 			}
 			pte_unmap(pte);
 			if (vmas)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5d6fb33..5bc0a96 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2094,7 +2094,7 @@
 		NODEMASK_SCRATCH(scratch);
 
 		if (!scratch)
-			return;
+			goto put_mpol;
 		/* contextualize the tmpfs mount point mempolicy */
 		new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
 		if (IS_ERR(new))
@@ -2103,19 +2103,20 @@
 		task_lock(current);
 		ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
 		task_unlock(current);
-		mpol_put(mpol);	/* drop our ref on sb mpol */
 		if (ret)
-			goto put_free;
+			goto put_new;
 
 		/* Create pseudo-vma that contains just the policy */
 		memset(&pvma, 0, sizeof(struct vm_area_struct));
 		pvma.vm_end = TASK_SIZE;	/* policy covers entire file */
 		mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
 
-put_free:
+put_new:
 		mpol_put(new);			/* drop initial ref */
 free_scratch:
 		NODEMASK_SCRATCH_FREE(scratch);
+put_mpol:
+		mpol_put(mpol);	/* drop our incoming ref on sb mpol */
 	}
 }
 
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b289310..37498ef 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -495,7 +495,6 @@
 
 	for (;;) {
 		struct writeback_control wbc = {
-			.bdi		= bdi,
 			.sync_mode	= WB_SYNC_NONE,
 			.older_than_this = NULL,
 			.nr_to_write	= write_chunk,
@@ -537,7 +536,7 @@
 		 * up.
 		 */
 		if (bdi_nr_reclaimable > bdi_thresh) {
-			writeback_inodes_wbc(&wbc);
+			writeback_inodes_wb(&bdi->wb, &wbc);
 			pages_written += write_chunk - wbc.nr_to_write;
 			get_dirty_limits(&background_thresh, &dirty_thresh,
 				       &bdi_thresh, bdi);
@@ -597,7 +596,7 @@
 	    (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
 			       + global_page_state(NR_UNSTABLE_NFS))
 					  > background_thresh)))
-		bdi_start_writeback(bdi, NULL, 0, 0);
+		bdi_start_background_writeback(bdi);
 }
 
 void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -705,9 +704,8 @@
 	 * We want to write everything out, not just down to the dirty
 	 * threshold
 	 */
-
 	if (bdi_has_dirty_io(&q->backing_dev_info))
-		bdi_start_writeback(&q->backing_dev_info, NULL, nr_pages, 0);
+		bdi_start_writeback(&q->backing_dev_info, nr_pages);
 }
 
 /*
@@ -835,7 +833,6 @@
 	pgoff_t done_index;
 	int cycled;
 	int range_whole = 0;
-	long nr_to_write = wbc->nr_to_write;
 
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
@@ -852,7 +849,22 @@
 		if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 			range_whole = 1;
 		cycled = 1; /* ignore range_cyclic tests */
+
+		/*
+		 * If this is a data integrity sync, cap the writeback to the
+		 * current end of file. Any extension to the file that occurs
+		 * after this is a new write and we don't need to write those
+		 * pages out to fulfil our data integrity requirements. If we
+		 * try to write them out, we can get stuck in this scan until
+		 * the concurrent writer stops adding dirty pages and extending
+		 * EOF.
+		 */
+		if (wbc->sync_mode == WB_SYNC_ALL &&
+		    wbc->range_end == LLONG_MAX) {
+			end = i_size_read(mapping->host) >> PAGE_CACHE_SHIFT;
+		}
 	}
+
 retry:
 	done_index = index;
 	while (!done && (index <= end)) {
@@ -935,11 +947,10 @@
 					done = 1;
 					break;
 				}
- 			}
+			}
 
-			if (nr_to_write > 0) {
-				nr_to_write--;
-				if (nr_to_write == 0 &&
+			if (wbc->nr_to_write > 0) {
+				if (--wbc->nr_to_write == 0 &&
 				    wbc->sync_mode == WB_SYNC_NONE) {
 					/*
 					 * We stop writing back only if we are
@@ -970,11 +981,8 @@
 		end = writeback_index - 1;
 		goto retry;
 	}
-	if (!wbc->no_nrwrite_index_update) {
-		if (wbc->range_cyclic || (range_whole && nr_to_write > 0))
-			mapping->writeback_index = done_index;
-		wbc->nr_to_write = nr_to_write;
-	}
+	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
+		mapping->writeback_index = done_index;
 
 	return ret;
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 431214b..9bd339e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3634,6 +3634,9 @@
 	int i;
 	void *ptr;
 
+	if (limit > get_max_mapped())
+		limit = get_max_mapped();
+
 	/* need to go over early_node_map to find out good range for node */
 	for_each_active_range_index_in_nid(i, nid) {
 		u64 addr;
@@ -3659,6 +3662,11 @@
 		ptr = phys_to_virt(addr);
 		memset(ptr, 0, size);
 		reserve_early_without_check(addr, addr + size, "BOOTMEM");
+		/*
+		 * The min_count is set to 0 so that bootmem allocated blocks
+		 * are never reported as leaks.
+		 */
+		kmemleak_alloc(ptr, size, 0, 0);
 		return ptr;
 	}
 
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6c00814..5bffada 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -9,6 +9,7 @@
 #include <linux/vmalloc.h>
 #include <linux/cgroup.h>
 #include <linux/swapops.h>
+#include <linux/kmemleak.h>
 
 static void __meminit
 __init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -126,6 +127,12 @@
 			if (!base)
 				base = vmalloc(table_size);
 		}
+		/*
+		 * The value stored in section->page_cgroup is (base - pfn)
+		 * and it does not point to the memory block allocated above,
+		 * causing kmemleak false positives.
+		 */
+		kmemleak_not_leak(base);
 	} else {
 		/*
  		 * We don't have to allocate page_cgroup again, but
diff --git a/mm/percpu.c b/mm/percpu.c
index 39f7dfd..6470e77 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -229,8 +229,8 @@
 	return pcpu_unit_map[cpu] * pcpu_unit_pages + page_idx;
 }
 
-static unsigned long __maybe_unused pcpu_chunk_addr(struct pcpu_chunk *chunk,
-						unsigned int cpu, int page_idx)
+static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
+				     unsigned int cpu, int page_idx)
 {
 	return (unsigned long)chunk->base_addr + pcpu_unit_offsets[cpu] +
 		(page_idx << PAGE_SHIFT);
@@ -978,7 +978,32 @@
  */
 phys_addr_t per_cpu_ptr_to_phys(void *addr)
 {
-	if (pcpu_addr_in_first_chunk(addr)) {
+	void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
+	bool in_first_chunk = false;
+	unsigned long first_start, first_end;
+	unsigned int cpu;
+
+	/*
+	 * The following test on first_start/end isn't strictly
+	 * necessary but will speed up lookups of addresses which
+	 * aren't in the first chunk.
+	 */
+	first_start = pcpu_chunk_addr(pcpu_first_chunk, pcpu_first_unit_cpu, 0);
+	first_end = pcpu_chunk_addr(pcpu_first_chunk, pcpu_last_unit_cpu,
+				    pcpu_unit_pages);
+	if ((unsigned long)addr >= first_start &&
+	    (unsigned long)addr < first_end) {
+		for_each_possible_cpu(cpu) {
+			void *start = per_cpu_ptr(base, cpu);
+
+			if (addr >= start && addr < start + pcpu_unit_size) {
+				in_first_chunk = true;
+				break;
+			}
+		}
+	}
+
+	if (in_first_chunk) {
 		if ((unsigned long)addr < VMALLOC_START ||
 		    (unsigned long)addr >= VMALLOC_END)
 			return __pa(addr);
@@ -1086,7 +1111,7 @@
 	static int group_map[NR_CPUS] __initdata;
 	static int group_cnt[NR_CPUS] __initdata;
 	const size_t static_size = __per_cpu_end - __per_cpu_start;
-	int group_cnt_max = 0, nr_groups = 1, nr_units = 0;
+	int nr_groups = 1, nr_units = 0;
 	size_t size_sum, min_unit_size, alloc_size;
 	int upa, max_upa, uninitialized_var(best_upa);	/* units_per_alloc */
 	int last_allocs, group, unit;
@@ -1096,7 +1121,7 @@
 
 	/* this function may be called multiple times */
 	memset(group_map, 0, sizeof(group_map));
-	memset(group_cnt, 0, sizeof(group_map));
+	memset(group_cnt, 0, sizeof(group_cnt));
 
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
@@ -1130,7 +1155,6 @@
 		}
 		group_map[cpu] = group;
 		group_cnt[group]++;
-		group_cnt_max = max(group_cnt_max, group_cnt[group]);
 	}
 
 	/*
diff --git a/mm/shmem.c b/mm/shmem.c
index 7e5030a..f65f840 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -764,10 +764,11 @@
 static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
 {
 	struct inode *inode = dentry->d_inode;
+	loff_t newsize = attr->ia_size;
 	int error;
 
-	if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
-		loff_t newsize = attr->ia_size;
+	if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
+					&& newsize != inode->i_size) {
 		struct page *page = NULL;
 
 		if (newsize < inode->i_size) {
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 915dceb..b94fe1b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -213,8 +213,9 @@
 	list_for_each_entry(shrinker, &shrinker_list, list) {
 		unsigned long long delta;
 		unsigned long total_scan;
-		unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
+		unsigned long max_pass;
 
+		max_pass = (*shrinker->shrink)(shrinker, 0, gfp_mask);
 		delta = (4 * scanned) / shrinker->seeks;
 		delta *= max_pass;
 		do_div(delta, lru_pages + 1);
@@ -242,8 +243,9 @@
 			int shrink_ret;
 			int nr_before;
 
-			nr_before = (*shrinker->shrink)(0, gfp_mask);
-			shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
+			nr_before = (*shrinker->shrink)(shrinker, 0, gfp_mask);
+			shrink_ret = (*shrinker->shrink)(shrinker, this_scan,
+								gfp_mask);
 			if (shrink_ret == -1)
 				break;
 			if (shrink_ret < nr_before)
@@ -296,7 +298,7 @@
 static void handle_write_error(struct address_space *mapping,
 				struct page *page, int error)
 {
-	lock_page(page);
+	lock_page_nosync(page);
 	if (page_mapping(page) == mapping)
 		mapping_set_error(mapping, error);
 	unlock_page(page);
@@ -1724,13 +1726,13 @@
  * If a zone is deemed to be full of pinned pages then just give it a light
  * scan then give up on it.
  */
-static int shrink_zones(int priority, struct zonelist *zonelist,
+static bool shrink_zones(int priority, struct zonelist *zonelist,
 					struct scan_control *sc)
 {
 	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 	struct zoneref *z;
 	struct zone *zone;
-	int progress = 0;
+	bool all_unreclaimable = true;
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
 					sc->nodemask) {
@@ -1757,9 +1759,9 @@
 		}
 
 		shrink_zone(priority, zone, sc);
-		progress = 1;
+		all_unreclaimable = false;
 	}
-	return progress;
+	return all_unreclaimable;
 }
 
 /*
@@ -1782,7 +1784,7 @@
 					struct scan_control *sc)
 {
 	int priority;
-	unsigned long ret = 0;
+	bool all_unreclaimable;
 	unsigned long total_scanned = 0;
 	struct reclaim_state *reclaim_state = current->reclaim_state;
 	unsigned long lru_pages = 0;
@@ -1813,7 +1815,7 @@
 		sc->nr_scanned = 0;
 		if (!priority)
 			disable_swap_token();
-		ret = shrink_zones(priority, zonelist, sc);
+		all_unreclaimable = shrink_zones(priority, zonelist, sc);
 		/*
 		 * Don't shrink slabs when reclaiming memory from
 		 * over limit cgroups
@@ -1826,10 +1828,8 @@
 			}
 		}
 		total_scanned += sc->nr_scanned;
-		if (sc->nr_reclaimed >= sc->nr_to_reclaim) {
-			ret = sc->nr_reclaimed;
+		if (sc->nr_reclaimed >= sc->nr_to_reclaim)
 			goto out;
-		}
 
 		/*
 		 * Try to write back as many pages as we just scanned.  This
@@ -1849,9 +1849,7 @@
 		    priority < DEF_PRIORITY - 2)
 			congestion_wait(BLK_RW_ASYNC, HZ/10);
 	}
-	/* top priority shrink_zones still had more to do? don't OOM, then */
-	if (ret && scanning_global_lru(sc))
-		ret = sc->nr_reclaimed;
+
 out:
 	/*
 	 * Now that we've scanned all the zones at this priority level, note
@@ -1877,7 +1875,14 @@
 	delayacct_freepages_end();
 	put_mems_allowed();
 
-	return ret;
+	if (sc->nr_reclaimed)
+		return sc->nr_reclaimed;
+
+	/* top priority shrink_zones still had more to do? don't OOM, then */
+	if (scanning_global_lru(sc) && !all_unreclaimable)
+		return 1;
+
+	return 0;
 }
 
 unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index bd537fc..50f58f5f 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -12,7 +12,7 @@
 		return NET_RX_DROP;
 
 	if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
-		goto drop;
+		skb->deliver_no_wcard = 1;
 
 	skb->skb_iif = skb->dev->ifindex;
 	__vlan_hwaccel_put_tag(skb, vlan_tci);
@@ -84,7 +84,7 @@
 	struct sk_buff *p;
 
 	if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
-		goto drop;
+		skb->deliver_no_wcard = 1;
 
 	skb->skb_iif = skb->dev->ifindex;
 	__vlan_hwaccel_put_tag(skb, vlan_tci);
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 55be908..5298426 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -708,7 +708,8 @@
 	netif_carrier_off(dev);
 
 	/* IFF_BROADCAST|IFF_MULTICAST; ??? */
-	dev->flags  = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
+	dev->flags  = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI |
+					  IFF_MASTER | IFF_SLAVE);
 	dev->iflink = real_dev->ifindex;
 	dev->state  = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
 					  (1<<__LINK_STATE_DORMANT))) |
diff --git a/net/9p/client.c b/net/9p/client.c
index 37c8da0..dc6f2f2 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -460,7 +460,8 @@
 			return err;
 		}
 
-		if (p9_is_proto_dotu(c))
+		if (p9_is_proto_dotu(c) ||
+			p9_is_proto_dotl(c))
 			err = -ecode;
 
 		if (!err || !IS_ERR_VALUE(err))
@@ -1015,14 +1016,18 @@
 	struct p9_qid qid;
 	int iounit;
 
-	P9_DPRINTK(P9_DEBUG_9P, ">>> TOPEN fid %d mode %d\n", fid->fid, mode);
-	err = 0;
 	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> %s fid %d mode %d\n",
+		p9_is_proto_dotl(clnt) ? "TLOPEN" : "TOPEN", fid->fid, mode);
+	err = 0;
 
 	if (fid->mode != -1)
 		return -EINVAL;
 
-	req = p9_client_rpc(clnt, P9_TOPEN, "db", fid->fid, mode);
+	if (p9_is_proto_dotl(clnt))
+		req = p9_client_rpc(clnt, P9_TLOPEN, "dd", fid->fid, mode);
+	else
+		req = p9_client_rpc(clnt, P9_TOPEN, "db", fid->fid, mode);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		goto error;
@@ -1034,10 +1039,9 @@
 		goto free_and_error;
 	}
 
-	P9_DPRINTK(P9_DEBUG_9P, "<<< ROPEN qid %x.%llx.%x iounit %x\n",
-				qid.type,
-				(unsigned long long)qid.path,
-				qid.version, iounit);
+	P9_DPRINTK(P9_DEBUG_9P, "<<< %s qid %x.%llx.%x iounit %x\n",
+		p9_is_proto_dotl(clnt) ? "RLOPEN" : "ROPEN",  qid.type,
+		(unsigned long long)qid.path, qid.version, iounit);
 
 	fid->mode = mode;
 	fid->iounit = iounit;
@@ -1049,6 +1053,50 @@
 }
 EXPORT_SYMBOL(p9_client_open);
 
+int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
+		gid_t gid, struct p9_qid *qid)
+{
+	int err = 0;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+	int iounit;
+
+	P9_DPRINTK(P9_DEBUG_9P,
+			">>> TLCREATE fid %d name %s flags %d mode %d gid %d\n",
+			ofid->fid, name, flags, mode, gid);
+	clnt = ofid->clnt;
+
+	if (ofid->mode != -1)
+		return -EINVAL;
+
+	req = p9_client_rpc(clnt, P9_TLCREATE, "dsddd", ofid->fid, name, flags,
+			mode, gid);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Qd", qid, &iounit);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RLCREATE qid %x.%llx.%x iounit %x\n",
+			qid->type,
+			(unsigned long long)qid->path,
+			qid->version, iounit);
+
+	ofid->mode = mode;
+	ofid->iounit = iounit;
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_create_dotl);
+
 int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
 		     char *extension)
 {
@@ -1094,6 +1142,59 @@
 }
 EXPORT_SYMBOL(p9_client_fcreate);
 
+int p9_client_symlink(struct p9_fid *dfid, char *name, char *symtgt, gid_t gid,
+		struct p9_qid *qid)
+{
+	int err = 0;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TSYMLINK dfid %d name %s  symtgt %s\n",
+			dfid->fid, name, symtgt);
+	clnt = dfid->clnt;
+
+	req = p9_client_rpc(clnt, P9_TSYMLINK, "dssd", dfid->fid, name, symtgt,
+			gid);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RSYMLINK qid %x.%llx.%x\n",
+			qid->type, (unsigned long long)qid->path, qid->version);
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_symlink);
+
+int p9_client_link(struct p9_fid *dfid, struct p9_fid *oldfid, char *newname)
+{
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TLINK dfid %d oldfid %d newname %s\n",
+			dfid->fid, oldfid->fid, newname);
+	clnt = dfid->clnt;
+	req = p9_client_rpc(clnt, P9_TLINK, "dds", dfid->fid, oldfid->fid,
+			newname);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RLINK\n");
+	p9_free_req(clnt, req);
+	return 0;
+}
+EXPORT_SYMBOL(p9_client_link);
+
 int p9_client_clunk(struct p9_fid *fid)
 {
 	int err;
@@ -1139,9 +1240,8 @@
 	P9_DPRINTK(P9_DEBUG_9P, "<<< RREMOVE fid %d\n", fid->fid);
 
 	p9_free_req(clnt, req);
-	p9_fid_destroy(fid);
-
 error:
+	p9_fid_destroy(fid);
 	return err;
 }
 EXPORT_SYMBOL(p9_client_remove);
@@ -1302,6 +1402,65 @@
 }
 EXPORT_SYMBOL(p9_client_stat);
 
+struct p9_stat_dotl *p9_client_getattr_dotl(struct p9_fid *fid,
+							u64 request_mask)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_stat_dotl *ret = kmalloc(sizeof(struct p9_stat_dotl),
+								GFP_KERNEL);
+	struct p9_req_t *req;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TGETATTR fid %d, request_mask %lld\n",
+							fid->fid, request_mask);
+
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	err = 0;
+	clnt = fid->clnt;
+
+	req = p9_client_rpc(clnt, P9_TGETATTR, "dq", fid->fid, request_mask);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "A", ret);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		p9_free_req(clnt, req);
+		goto error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P,
+		"<<< RGETATTR st_result_mask=%lld\n"
+		"<<< qid=%x.%llx.%x\n"
+		"<<< st_mode=%8.8x st_nlink=%llu\n"
+		"<<< st_uid=%d st_gid=%d\n"
+		"<<< st_rdev=%llx st_size=%llx st_blksize=%llu st_blocks=%llu\n"
+		"<<< st_atime_sec=%lld st_atime_nsec=%lld\n"
+		"<<< st_mtime_sec=%lld st_mtime_nsec=%lld\n"
+		"<<< st_ctime_sec=%lld st_ctime_nsec=%lld\n"
+		"<<< st_btime_sec=%lld st_btime_nsec=%lld\n"
+		"<<< st_gen=%lld st_data_version=%lld",
+		ret->st_result_mask, ret->qid.type, ret->qid.path,
+		ret->qid.version, ret->st_mode, ret->st_nlink, ret->st_uid,
+		ret->st_gid, ret->st_rdev, ret->st_size, ret->st_blksize,
+		ret->st_blocks, ret->st_atime_sec, ret->st_atime_nsec,
+		ret->st_mtime_sec, ret->st_mtime_nsec, ret->st_ctime_sec,
+		ret->st_ctime_nsec, ret->st_btime_sec, ret->st_btime_nsec,
+		ret->st_gen, ret->st_data_version);
+
+	p9_free_req(clnt, req);
+	return ret;
+
+error:
+	kfree(ret);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL(p9_client_getattr_dotl);
+
 static int p9_client_statsize(struct p9_wstat *wst, int proto_version)
 {
 	int ret;
@@ -1366,6 +1525,36 @@
 }
 EXPORT_SYMBOL(p9_client_wstat);
 
+int p9_client_setattr(struct p9_fid *fid, struct p9_iattr_dotl *p9attr)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TSETATTR fid %d\n", fid->fid);
+	P9_DPRINTK(P9_DEBUG_9P,
+		"    valid=%x mode=%x uid=%d gid=%d size=%lld\n"
+		"    atime_sec=%lld atime_nsec=%lld\n"
+		"    mtime_sec=%lld mtime_nsec=%lld\n",
+		p9attr->valid, p9attr->mode, p9attr->uid, p9attr->gid,
+		p9attr->size, p9attr->atime_sec, p9attr->atime_nsec,
+		p9attr->mtime_sec, p9attr->mtime_nsec);
+
+	req = p9_client_rpc(clnt, P9_TSETATTR, "dI", fid->fid, p9attr);
+
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RSETATTR fid %d\n", fid->fid);
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_setattr);
+
 int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb)
 {
 	int err;
@@ -1432,3 +1621,187 @@
 }
 EXPORT_SYMBOL(p9_client_rename);
 
+/*
+ * An xattrwalk without @attr_name gives the fid for the lisxattr namespace
+ */
+struct p9_fid *p9_client_xattrwalk(struct p9_fid *file_fid,
+				const char *attr_name, u64 *attr_size)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+	struct p9_fid *attr_fid;
+
+	err = 0;
+	clnt = file_fid->clnt;
+	attr_fid = p9_fid_create(clnt);
+	if (IS_ERR(attr_fid)) {
+		err = PTR_ERR(attr_fid);
+		attr_fid = NULL;
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P,
+		">>> TXATTRWALK file_fid %d, attr_fid %d name %s\n",
+		file_fid->fid, attr_fid->fid, attr_name);
+
+	req = p9_client_rpc(clnt, P9_TXATTRWALK, "dds",
+			file_fid->fid, attr_fid->fid, attr_name);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	err = p9pdu_readf(req->rc, clnt->proto_version, "q", attr_size);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		p9_free_req(clnt, req);
+		goto clunk_fid;
+	}
+	p9_free_req(clnt, req);
+	P9_DPRINTK(P9_DEBUG_9P, "<<<  RXATTRWALK fid %d size %llu\n",
+		attr_fid->fid, *attr_size);
+	return attr_fid;
+clunk_fid:
+	p9_client_clunk(attr_fid);
+	attr_fid = NULL;
+error:
+	if (attr_fid && (attr_fid != file_fid))
+		p9_fid_destroy(attr_fid);
+
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(p9_client_xattrwalk);
+
+int p9_client_xattrcreate(struct p9_fid *fid, const char *name,
+			u64 attr_size, int flags)
+{
+	int err;
+	struct p9_req_t *req;
+	struct p9_client *clnt;
+
+	P9_DPRINTK(P9_DEBUG_9P,
+		">>> TXATTRCREATE fid %d name  %s size %lld flag %d\n",
+		fid->fid, name, (long long)attr_size, flags);
+	err = 0;
+	clnt = fid->clnt;
+	req = p9_client_rpc(clnt, P9_TXATTRCREATE, "dsqd",
+			fid->fid, name, attr_size, flags);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RXATTRCREATE fid %d\n", fid->fid);
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL_GPL(p9_client_xattrcreate);
+
+int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset)
+{
+	int err, rsize, total;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+	char *dataptr;
+
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TREADDIR fid %d offset %llu count %d\n",
+				fid->fid, (long long unsigned) offset, count);
+
+	err = 0;
+	clnt = fid->clnt;
+	total = 0;
+
+	rsize = fid->iounit;
+	if (!rsize || rsize > clnt->msize-P9_READDIRHDRSZ)
+		rsize = clnt->msize - P9_READDIRHDRSZ;
+
+	if (count < rsize)
+		rsize = count;
+
+	req = p9_client_rpc(clnt, P9_TREADDIR, "dqd", fid->fid, offset, rsize);
+	if (IS_ERR(req)) {
+		err = PTR_ERR(req);
+		goto error;
+	}
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "D", &count, &dataptr);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto free_and_error;
+	}
+
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RREADDIR count %d\n", count);
+
+	if (data)
+		memmove(data, dataptr, count);
+
+	p9_free_req(clnt, req);
+	return count;
+
+free_and_error:
+	p9_free_req(clnt, req);
+error:
+	return err;
+}
+EXPORT_SYMBOL(p9_client_readdir);
+
+int p9_client_mknod_dotl(struct p9_fid *fid, char *name, int mode,
+			dev_t rdev, gid_t gid, struct p9_qid *qid)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TMKNOD fid %d name %s mode %d major %d "
+		"minor %d\n", fid->fid, name, mode, MAJOR(rdev), MINOR(rdev));
+	req = p9_client_rpc(clnt, P9_TMKNOD, "dsdddd", fid->fid, name, mode,
+		MAJOR(rdev), MINOR(rdev), gid);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RMKNOD qid %x.%llx.%x\n", qid->type,
+				(unsigned long long)qid->path, qid->version);
+
+error:
+	p9_free_req(clnt, req);
+	return err;
+
+}
+EXPORT_SYMBOL(p9_client_mknod_dotl);
+
+int p9_client_mkdir_dotl(struct p9_fid *fid, char *name, int mode,
+				gid_t gid, struct p9_qid *qid)
+{
+	int err;
+	struct p9_client *clnt;
+	struct p9_req_t *req;
+
+	err = 0;
+	clnt = fid->clnt;
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TMKDIR fid %d name %s mode %d gid %d\n",
+		 fid->fid, name, mode, gid);
+	req = p9_client_rpc(clnt, P9_TMKDIR, "dsdd", fid->fid, name, mode,
+		gid);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	err = p9pdu_readf(req->rc, clnt->proto_version, "Q", qid);
+	if (err) {
+		p9pdu_dump(1, req->rc);
+		goto error;
+	}
+	P9_DPRINTK(P9_DEBUG_9P, "<<< RMKDIR qid %x.%llx.%x\n", qid->type,
+				(unsigned long long)qid->path, qid->version);
+
+error:
+	p9_free_req(clnt, req);
+	return err;
+
+}
+EXPORT_SYMBOL(p9_client_mkdir_dotl);
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 149f821..3acd3af 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -141,6 +141,7 @@
 	D - data blob (int32_t size followed by void *, results are not freed)
 	T - array of strings (int16_t count, followed by strings)
 	R - array of qids (int16_t count, followed by qids)
+	A - stat for 9p2000.L (p9_stat_dotl)
 	? - if optional = 1, continue parsing
 */
 
@@ -340,6 +341,33 @@
 				}
 			}
 			break;
+		case 'A': {
+				struct p9_stat_dotl *stbuf =
+				    va_arg(ap, struct p9_stat_dotl *);
+
+				memset(stbuf, 0, sizeof(struct p9_stat_dotl));
+				errcode =
+				    p9pdu_readf(pdu, proto_version,
+					"qQdddqqqqqqqqqqqqqqq",
+					&stbuf->st_result_mask,
+					&stbuf->qid,
+					&stbuf->st_mode,
+					&stbuf->st_uid, &stbuf->st_gid,
+					&stbuf->st_nlink,
+					&stbuf->st_rdev, &stbuf->st_size,
+					&stbuf->st_blksize, &stbuf->st_blocks,
+					&stbuf->st_atime_sec,
+					&stbuf->st_atime_nsec,
+					&stbuf->st_mtime_sec,
+					&stbuf->st_mtime_nsec,
+					&stbuf->st_ctime_sec,
+					&stbuf->st_ctime_nsec,
+					&stbuf->st_btime_sec,
+					&stbuf->st_btime_nsec,
+					&stbuf->st_gen,
+					&stbuf->st_data_version);
+			}
+			break;
 		case '?':
 			if ((proto_version != p9_proto_2000u) &&
 				(proto_version != p9_proto_2000L))
@@ -488,6 +516,23 @@
 				}
 			}
 			break;
+		case 'I':{
+				struct p9_iattr_dotl *p9attr = va_arg(ap,
+							struct p9_iattr_dotl *);
+
+				errcode = p9pdu_writef(pdu, proto_version,
+							"ddddqqqqq",
+							p9attr->valid,
+							p9attr->mode,
+							p9attr->uid,
+							p9attr->gid,
+							p9attr->size,
+							p9attr->atime_sec,
+							p9attr->atime_nsec,
+							p9attr->mtime_sec,
+							p9attr->mtime_nsec);
+			}
+			break;
 		case '?':
 			if ((proto_version != p9_proto_2000u) &&
 				(proto_version != p9_proto_2000L))
@@ -580,3 +625,30 @@
 	pdu->offset = 0;
 	pdu->size = 0;
 }
+
+int p9dirent_read(char *buf, int len, struct p9_dirent *dirent,
+						int proto_version)
+{
+	struct p9_fcall fake_pdu;
+	int ret;
+	char *nameptr;
+
+	fake_pdu.size = len;
+	fake_pdu.capacity = len;
+	fake_pdu.sdata = buf;
+	fake_pdu.offset = 0;
+
+	ret = p9pdu_readf(&fake_pdu, proto_version, "Qqbs", &dirent->qid,
+			&dirent->d_off, &dirent->d_type, &nameptr);
+	if (ret) {
+		P9_DPRINTK(P9_DEBUG_9P, "<<< p9dirent_read failed: %d\n", ret);
+		p9pdu_dump(1, &fake_pdu);
+		goto out;
+	}
+
+	strcpy(dirent->d_name, nameptr);
+
+out:
+	return fake_pdu.offset;
+}
+EXPORT_SYMBOL(p9dirent_read);
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 98ce9bc..c85109d 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -948,7 +948,7 @@
 
 	csocket = NULL;
 
-	if (strlen(addr) > UNIX_PATH_MAX) {
+	if (strlen(addr) >= UNIX_PATH_MAX) {
 		P9_EPRINTK(KERN_ERR, "p9_trans_unix: address too long: %s\n",
 			addr);
 		return -ENAMETOOLONG;
diff --git a/net/bluetooth/bnep/netdev.c b/net/bluetooth/bnep/netdev.c
index 0faad5c..8c100c9 100644
--- a/net/bluetooth/bnep/netdev.c
+++ b/net/bluetooth/bnep/netdev.c
@@ -104,6 +104,8 @@
 				break;
 			memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
 			memcpy(__skb_put(skb, ETH_ALEN), ha->addr, ETH_ALEN);
+
+			i++;
 		}
 		r->len = htons(skb->len - len);
 	}
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b10e3cd..800b6b9 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -358,6 +358,11 @@
 		acl->sec_level = sec_level;
 		acl->auth_type = auth_type;
 		hci_acl_connect(acl);
+	} else {
+		if (acl->sec_level < sec_level)
+			acl->sec_level = sec_level;
+		if (acl->auth_type < auth_type)
+			acl->auth_type = auth_type;
 	}
 
 	if (type == ACL_LINK)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6c57fc7..786b5de 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1049,6 +1049,8 @@
 	if (conn) {
 		if (!ev->status)
 			conn->link_mode |= HCI_LM_AUTH;
+		else
+			conn->sec_level = BT_SECURITY_LOW;
 
 		clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
 
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 1b682a5..cf3c407 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -401,6 +401,11 @@
 	l2cap_send_sframe(pi, control);
 }
 
+static inline int __l2cap_no_conn_pending(struct sock *sk)
+{
+	return !(l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND);
+}
+
 static void l2cap_do_start(struct sock *sk)
 {
 	struct l2cap_conn *conn = l2cap_pi(sk)->conn;
@@ -409,12 +414,13 @@
 		if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
 			return;
 
-		if (l2cap_check_security(sk)) {
+		if (l2cap_check_security(sk) && __l2cap_no_conn_pending(sk)) {
 			struct l2cap_conn_req req;
 			req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
 			req.psm  = l2cap_pi(sk)->psm;
 
 			l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+			l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
 
 			l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_REQ, sizeof(req), &req);
@@ -464,12 +470,14 @@
 		}
 
 		if (sk->sk_state == BT_CONNECT) {
-			if (l2cap_check_security(sk)) {
+			if (l2cap_check_security(sk) &&
+					__l2cap_no_conn_pending(sk)) {
 				struct l2cap_conn_req req;
 				req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
 				req.psm  = l2cap_pi(sk)->psm;
 
 				l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+				l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
 
 				l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_REQ, sizeof(req), &req);
@@ -2912,7 +2920,6 @@
 		l2cap_pi(sk)->ident = 0;
 		l2cap_pi(sk)->dcid = dcid;
 		l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
-
 		l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
 
 		l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
@@ -4404,6 +4411,7 @@
 				req.psm  = l2cap_pi(sk)->psm;
 
 				l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+				l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
 
 				l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
 					L2CAP_CONN_REQ, sizeof(req), &req);
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index eedf2c9..753fc42 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -217,14 +217,6 @@
 	return count != 0 && ret;
 }
 
-static void br_poll_controller(struct net_device *br_dev)
-{
-	struct netpoll *np = br_dev->npinfo->netpoll;
-
-	if (np->real_dev != br_dev)
-		netpoll_poll_dev(np->real_dev);
-}
-
 void br_netpoll_cleanup(struct net_device *dev)
 {
 	struct net_bridge *br = netdev_priv(dev);
@@ -295,7 +287,6 @@
 	.ndo_do_ioctl		 = br_dev_ioctl,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_netpoll_cleanup	 = br_netpoll_cleanup,
-	.ndo_poll_controller	 = br_poll_controller,
 #endif
 };
 
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 26637439..b01dde3 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -128,7 +128,7 @@
 {
 	struct net_bridge *br = (struct net_bridge *)_data;
 	unsigned long delay = hold_time(br);
-	unsigned long next_timer = jiffies + br->forward_delay;
+	unsigned long next_timer = jiffies + br->ageing_time;
 	int i;
 
 	spin_lock_bh(&br->hash_lock);
@@ -149,9 +149,7 @@
 	}
 	spin_unlock_bh(&br->hash_lock);
 
-	/* Add HZ/4 to ensure we round the jiffies upwards to be after the next
-	 * timer, otherwise we might round down and will have no-op run. */
-	mod_timer(&br->gc_timer, round_jiffies(next_timer + HZ/4));
+	mod_timer(&br->gc_timer, round_jiffies_up(next_timer));
 }
 
 /* Completely flush all dynamic entries in forwarding database.*/
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index a98ef13..595da45 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -50,14 +50,7 @@
 			kfree_skb(skb);
 		else {
 			skb_push(skb, ETH_HLEN);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-			if (unlikely(skb->dev->priv_flags & IFF_IN_NETPOLL)) {
-				netpoll_send_skb(skb->dev->npinfo->netpoll, skb);
-				skb->dev->priv_flags &= ~IFF_IN_NETPOLL;
-			} else
-#endif
-				dev_queue_xmit(skb);
+			dev_queue_xmit(skb);
 		}
 	}
 
@@ -73,23 +66,9 @@
 
 static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb)
 {
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	struct net_bridge *br = to->br;
-	if (unlikely(br->dev->priv_flags & IFF_IN_NETPOLL)) {
-		struct netpoll *np;
-		to->dev->npinfo = skb->dev->npinfo;
-		np = skb->dev->npinfo->netpoll;
-		np->real_dev = np->dev = to->dev;
-		to->dev->priv_flags |= IFF_IN_NETPOLL;
-	}
-#endif
 	skb->dev = to->dev;
 	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
 		br_forward_finish);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	if (skb->dev->npinfo)
-		skb->dev->npinfo->netpoll->dev = br->dev;
-#endif
 }
 
 static void __br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
@@ -140,10 +119,10 @@
 			 void (*__packet_hook)(const struct net_bridge_port *p,
 					       struct sk_buff *skb))
 {
+	struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
+
 	skb = skb_clone(skb, GFP_ATOMIC);
 	if (!skb) {
-		struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
-
 		dev->stats.tx_dropped++;
 		return -ENOMEM;
 	}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 9d21d98..27ae946 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -99,6 +99,15 @@
 	return NULL;
 }
 
+static struct net_bridge_mdb_entry *br_mdb_ip_get(
+	struct net_bridge_mdb_htable *mdb, struct br_ip *dst)
+{
+	if (!mdb)
+		return NULL;
+
+	return __br_mdb_ip_get(mdb, dst, br_ip_hash(mdb, dst));
+}
+
 static struct net_bridge_mdb_entry *br_mdb_ip4_get(
 	struct net_bridge_mdb_htable *mdb, __be32 dst)
 {
@@ -107,7 +116,7 @@
 	br_dst.u.ip4 = dst;
 	br_dst.proto = htons(ETH_P_IP);
 
-	return __br_mdb_ip_get(mdb, &br_dst, __br_ip4_hash(mdb, dst));
+	return br_mdb_ip_get(mdb, &br_dst);
 }
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -119,23 +128,17 @@
 	ipv6_addr_copy(&br_dst.u.ip6, dst);
 	br_dst.proto = htons(ETH_P_IPV6);
 
-	return __br_mdb_ip_get(mdb, &br_dst, __br_ip6_hash(mdb, dst));
+	return br_mdb_ip_get(mdb, &br_dst);
 }
 #endif
 
-static struct net_bridge_mdb_entry *br_mdb_ip_get(
-	struct net_bridge_mdb_htable *mdb, struct br_ip *dst)
-{
-	return __br_mdb_ip_get(mdb, dst, br_ip_hash(mdb, dst));
-}
-
 struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
 					struct sk_buff *skb)
 {
 	struct net_bridge_mdb_htable *mdb = br->mdb;
 	struct br_ip ip;
 
-	if (!mdb || br->multicast_disabled)
+	if (br->multicast_disabled)
 		return NULL;
 
 	if (BR_INPUT_SKB_CB(skb)->igmp)
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 4442099..8fb75f8 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -591,6 +591,9 @@
 
 	pskb_trim_rcsum(skb, len);
 
+	/* BUG: Should really parse the IP options here. */
+	memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+
 	nf_bridge_put(skb->nf_bridge);
 	if (!nf_bridge_alloc(skb))
 		return NF_DROP;
diff --git a/net/caif/cfrfml.c b/net/caif/cfrfml.c
index cd2830f..fd27b17 100644
--- a/net/caif/cfrfml.c
+++ b/net/caif/cfrfml.c
@@ -83,7 +83,7 @@
 	if (!cfsrvl_ready(service, &ret))
 		return ret;
 
-	if (!cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
+	if (cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
 		pr_err("CAIF: %s():Packet too large - size=%d\n",
 			__func__, cfpkt_getlen(pkt));
 		return -EOVERFLOW;
diff --git a/net/caif/cfveil.c b/net/caif/cfveil.c
index 0fd827f..e04f7d9 100644
--- a/net/caif/cfveil.c
+++ b/net/caif/cfveil.c
@@ -84,7 +84,7 @@
 		return ret;
 	caif_assert(layr->dn != NULL);
 	caif_assert(layr->dn->transmit != NULL);
-	if (!cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
+	if (cfpkt_getlen(pkt) > CAIF_MAX_PAYLOAD_SIZE) {
 		pr_warning("CAIF: %s(): Packet too large - size=%d\n",
 			   __func__, cfpkt_getlen(pkt));
 		return -EOVERFLOW;
diff --git a/net/core/dev.c b/net/core/dev.c
index 1845b08..1f466e8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1488,6 +1488,7 @@
 int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
 {
 	skb_orphan(skb);
+	nf_reset(skb);
 
 	if (!(dev->flags & IFF_UP) ||
 	    (skb->len > (dev->mtu + dev->hard_header_len))) {
@@ -1553,6 +1554,24 @@
 	rcu_read_unlock();
 }
 
+/*
+ * Routine to help set real_num_tx_queues. To avoid skbs mapped to queues
+ * greater then real_num_tx_queues stale skbs on the qdisc must be flushed.
+ */
+void netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
+{
+	unsigned int real_num = dev->real_num_tx_queues;
+
+	if (unlikely(txq > dev->num_tx_queues))
+		;
+	else if (txq > real_num)
+		dev->real_num_tx_queues = txq;
+	else if (txq < real_num) {
+		dev->real_num_tx_queues = txq;
+		qdisc_reset_all_tx_gt(dev, txq);
+	}
+}
+EXPORT_SYMBOL(netif_set_real_num_tx_queues);
 
 static inline void __netif_reschedule(struct Qdisc *q)
 {
@@ -1893,8 +1912,16 @@
  */
 static inline void skb_orphan_try(struct sk_buff *skb)
 {
-	if (!skb_tx(skb)->flags)
+	struct sock *sk = skb->sk;
+
+	if (sk && !skb_tx(skb)->flags) {
+		/* skb_tx_hash() wont be able to get sk.
+		 * We copy sk_hash into skb->rxhash
+		 */
+		if (!skb->rxhash)
+			skb->rxhash = sk->sk_hash;
 		skb_orphan(skb);
+	}
 }
 
 int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -1980,8 +2007,7 @@
 	if (skb->sk && skb->sk->sk_hash)
 		hash = skb->sk->sk_hash;
 	else
-		hash = (__force u16) skb->protocol;
-
+		hash = (__force u16) skb->protocol ^ skb->rxhash;
 	hash = jhash_1word(hash, hashrnd);
 
 	return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
@@ -2004,12 +2030,11 @@
 static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 					struct sk_buff *skb)
 {
-	u16 queue_index;
+	int queue_index;
 	struct sock *sk = skb->sk;
 
-	if (sk_tx_queue_recorded(sk)) {
-		queue_index = sk_tx_queue_get(sk);
-	} else {
+	queue_index = sk_tx_queue_get(sk);
+	if (queue_index < 0) {
 		const struct net_device_ops *ops = dev->netdev_ops;
 
 		if (ops->ndo_select_queue) {
@@ -2253,11 +2278,9 @@
 	if (skb_rx_queue_recorded(skb)) {
 		u16 index = skb_get_rx_queue(skb);
 		if (unlikely(index >= dev->num_rx_queues)) {
-			if (net_ratelimit()) {
-				pr_warning("%s received packet on queue "
-					"%u, but number of RX queues is %u\n",
-					dev->name, index, dev->num_rx_queues);
-			}
+			WARN_ONCE(dev->num_rx_queues > 1, "%s received packet "
+				"on queue %u, but number of RX queues is %u\n",
+				dev->name, index, dev->num_rx_queues);
 			goto done;
 		}
 		rxqueue = dev->_rx + index;
@@ -2795,7 +2818,7 @@
 	struct net_device *orig_dev;
 	struct net_device *master;
 	struct net_device *null_or_orig;
-	struct net_device *null_or_bond;
+	struct net_device *orig_or_bond;
 	int ret = NET_RX_DROP;
 	__be16 type;
 
@@ -2812,13 +2835,24 @@
 	if (!skb->skb_iif)
 		skb->skb_iif = skb->dev->ifindex;
 
+	/*
+	 * bonding note: skbs received on inactive slaves should only
+	 * be delivered to pkt handlers that are exact matches.  Also
+	 * the deliver_no_wcard flag will be set.  If packet handlers
+	 * are sensitive to duplicate packets these skbs will need to
+	 * be dropped at the handler.  The vlan accel path may have
+	 * already set the deliver_no_wcard flag.
+	 */
 	null_or_orig = NULL;
 	orig_dev = skb->dev;
 	master = ACCESS_ONCE(orig_dev->master);
-	if (master) {
-		if (skb_bond_should_drop(skb, master))
+	if (skb->deliver_no_wcard)
+		null_or_orig = orig_dev;
+	else if (master) {
+		if (skb_bond_should_drop(skb, master)) {
+			skb->deliver_no_wcard = 1;
 			null_or_orig = orig_dev; /* deliver only exact match */
-		else
+		} else
 			skb->dev = master;
 	}
 
@@ -2868,10 +2902,10 @@
 	 * device that may have registered for a specific ptype.  The
 	 * handler may have to adjust skb->dev and orig_dev.
 	 */
-	null_or_bond = NULL;
+	orig_or_bond = orig_dev;
 	if ((skb->dev->priv_flags & IFF_802_1Q_VLAN) &&
 	    (vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING)) {
-		null_or_bond = vlan_dev_real_dev(skb->dev);
+		orig_or_bond = vlan_dev_real_dev(skb->dev);
 	}
 
 	type = skb->protocol;
@@ -2879,7 +2913,7 @@
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
 		if (ptype->type == type && (ptype->dev == null_or_orig ||
 		     ptype->dev == skb->dev || ptype->dev == orig_dev ||
-		     ptype->dev == null_or_bond)) {
+		     ptype->dev == orig_or_bond)) {
 			if (pt_prev)
 				ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = ptype;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index a0f4964..75e4ffe 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -318,23 +318,33 @@
 }
 
 static noinline_for_stack int ethtool_set_rxnfc(struct net_device *dev,
-						void __user *useraddr)
+						u32 cmd, void __user *useraddr)
 {
-	struct ethtool_rxnfc cmd;
+	struct ethtool_rxnfc info;
+	size_t info_size = sizeof(info);
 
 	if (!dev->ethtool_ops->set_rxnfc)
 		return -EOPNOTSUPP;
 
-	if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
+	/* struct ethtool_rxnfc was originally defined for
+	 * ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
+	 * members.  User-space might still be using that
+	 * definition. */
+	if (cmd == ETHTOOL_SRXFH)
+		info_size = (offsetof(struct ethtool_rxnfc, data) +
+			     sizeof(info.data));
+
+	if (copy_from_user(&info, useraddr, info_size))
 		return -EFAULT;
 
-	return dev->ethtool_ops->set_rxnfc(dev, &cmd);
+	return dev->ethtool_ops->set_rxnfc(dev, &info);
 }
 
 static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev,
-						void __user *useraddr)
+						u32 cmd, void __user *useraddr)
 {
 	struct ethtool_rxnfc info;
+	size_t info_size = sizeof(info);
 	const struct ethtool_ops *ops = dev->ethtool_ops;
 	int ret;
 	void *rule_buf = NULL;
@@ -342,13 +352,22 @@
 	if (!ops->get_rxnfc)
 		return -EOPNOTSUPP;
 
-	if (copy_from_user(&info, useraddr, sizeof(info)))
+	/* struct ethtool_rxnfc was originally defined for
+	 * ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
+	 * members.  User-space might still be using that
+	 * definition. */
+	if (cmd == ETHTOOL_GRXFH)
+		info_size = (offsetof(struct ethtool_rxnfc, data) +
+			     sizeof(info.data));
+
+	if (copy_from_user(&info, useraddr, info_size))
 		return -EFAULT;
 
 	if (info.cmd == ETHTOOL_GRXCLSRLALL) {
 		if (info.rule_cnt > 0) {
-			rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
-					   GFP_USER);
+			if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
+				rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+						   GFP_USER);
 			if (!rule_buf)
 				return -ENOMEM;
 		}
@@ -359,7 +378,7 @@
 		goto err_out;
 
 	ret = -EFAULT;
-	if (copy_to_user(useraddr, &info, sizeof(info)))
+	if (copy_to_user(useraddr, &info, info_size))
 		goto err_out;
 
 	if (rule_buf) {
@@ -1516,12 +1535,12 @@
 	case ETHTOOL_GRXCLSRLCNT:
 	case ETHTOOL_GRXCLSRULE:
 	case ETHTOOL_GRXCLSRLALL:
-		rc = ethtool_get_rxnfc(dev, useraddr);
+		rc = ethtool_get_rxnfc(dev, ethcmd, useraddr);
 		break;
 	case ETHTOOL_SRXFH:
 	case ETHTOOL_SRXCLSRLDEL:
 	case ETHTOOL_SRXCLSRLINS:
-		rc = ethtool_set_rxnfc(dev, useraddr);
+		rc = ethtool_set_rxnfc(dev, ethcmd, useraddr);
 		break;
 	case ETHTOOL_GGRO:
 		rc = ethtool_get_gro(dev, useraddr);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index cf8e703..785e527 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -107,6 +107,7 @@
 
 /* Protects against soft lockup during large deletion */
 static struct rb_root est_root = RB_ROOT;
+static DEFINE_SPINLOCK(est_tree_lock);
 
 static void est_timer(unsigned long arg)
 {
@@ -201,7 +202,6 @@
  *
  * Returns 0 on success or a negative error code.
  *
- * NOTE: Called under rtnl_mutex
  */
 int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
 		      struct gnet_stats_rate_est *rate_est,
@@ -232,6 +232,7 @@
 	est->last_packets = bstats->packets;
 	est->avpps = rate_est->pps<<10;
 
+	spin_lock(&est_tree_lock);
 	if (!elist[idx].timer.function) {
 		INIT_LIST_HEAD(&elist[idx].list);
 		setup_timer(&elist[idx].timer, est_timer, idx);
@@ -242,6 +243,7 @@
 
 	list_add_rcu(&est->list, &elist[idx].list);
 	gen_add_node(est);
+	spin_unlock(&est_tree_lock);
 
 	return 0;
 }
@@ -261,13 +263,13 @@
  *
  * Removes the rate estimator specified by &bstats and &rate_est.
  *
- * NOTE: Called under rtnl_mutex
  */
 void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
 			struct gnet_stats_rate_est *rate_est)
 {
 	struct gen_estimator *e;
 
+	spin_lock(&est_tree_lock);
 	while ((e = gen_find_node(bstats, rate_est))) {
 		rb_erase(&e->node, &est_root);
 
@@ -278,6 +280,7 @@
 		list_del_rcu(&e->list);
 		call_rcu(&e->e_rcu, __gen_kill_estimator);
 	}
+	spin_unlock(&est_tree_lock);
 }
 EXPORT_SYMBOL(gen_kill_estimator);
 
@@ -312,8 +315,14 @@
 bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
 			  const struct gnet_stats_rate_est *rate_est)
 {
+	bool res;
+
 	ASSERT_RTNL();
 
-	return gen_find_node(bstats, rate_est) != NULL;
+	spin_lock(&est_tree_lock);
+	res = gen_find_node(bstats, rate_est) != NULL;
+	spin_unlock(&est_tree_lock);
+
+	return res;
 }
 EXPORT_SYMBOL(gen_estimator_active);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 6ba1c0e..a4e0a74 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -949,7 +949,10 @@
 {
 	struct hh_cache *hh;
 	void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
-		= neigh->dev->header_ops->cache_update;
+		= NULL;
+
+	if (neigh->dev->header_ops)
+		update = neigh->dev->header_ops->cache_update;
 
 	if (update) {
 		for (hh = neigh->hh; hh; hh = hh->hh_next) {
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 2ad68da..1dacd7b 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2170,7 +2170,7 @@
 	end_time = ktime_now();
 
 	pkt_dev->idle_acc += ktime_to_ns(ktime_sub(end_time, start_time));
-	pkt_dev->next_tx = ktime_add_ns(end_time, pkt_dev->delay);
+	pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
 }
 
 static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9f07e74..ce88293 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -532,6 +532,7 @@
 	new->ip_summed		= old->ip_summed;
 	skb_copy_queue_mapping(new, old);
 	new->priority		= old->priority;
+	new->deliver_no_wcard	= old->deliver_no_wcard;
 #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
 	new->ipvs_property	= old->ipvs_property;
 #endif
@@ -569,7 +570,6 @@
 	C(len);
 	C(data_len);
 	C(mac_len);
-	C(rxhash);
 	n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
 	n->cloned = 1;
 	n->nohdr = 0;
@@ -843,7 +843,9 @@
 	skb->network_header   += off;
 	if (skb_mac_header_was_set(skb))
 		skb->mac_header += off;
-	skb->csum_start       += nhead;
+	/* Only adjust this if it actually is csum_start rather than csum */
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		skb->csum_start += nhead;
 	skb->cloned   = 0;
 	skb->hdr_len  = 0;
 	skb->nohdr    = 0;
@@ -930,7 +932,8 @@
 	copy_skb_header(n, skb);
 
 	off                  = newheadroom - oldheadroom;
-	n->csum_start       += off;
+	if (n->ip_summed == CHECKSUM_PARTIAL)
+		n->csum_start += off;
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
 	n->transport_header += off;
 	n->network_header   += off;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index c51b554..1120178 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,7 +1,7 @@
 menuconfig NET_DSA
 	bool "Distributed Switch Architecture support"
 	default n
-	depends on EXPERIMENTAL && !S390
+	depends on EXPERIMENTAL && NET_ETHERNET && !S390
 	select PHYLIB
 	---help---
 	  This allows you to use hardware switch chips that use
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 8e3a1fd..7c3a7d1 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -303,7 +303,7 @@
 	  If unsure, say N.
 
 config SYN_COOKIES
-	bool "IP: TCP syncookie support (disabled per default)"
+	bool "IP: TCP syncookie support"
 	---help---
 	  Normal TCP/IP networking is open to an attack known as "SYN
 	  flooding". This denial-of-service attack prevents legitimate remote
@@ -328,13 +328,13 @@
 	  server is really overloaded. If this happens frequently better turn
 	  them off.
 
-	  If you say Y here, note that SYN cookies aren't enabled by default;
-	  you can enable them by saying Y to "/proc file system support" and
+	  If you say Y here, you can disable SYN cookies at run time by
+	  saying Y to "/proc file system support" and
 	  "Sysctl support" below and executing the command
 
-	  echo 1 >/proc/sys/net/ipv4/tcp_syncookies
+	  echo 0 > /proc/sys/net/ipv4/tcp_syncookies
 
-	  at boot time after the /proc file system has been mounted.
+	  after the /proc file system has been mounted.
 
 	  If unsure, say N.
 
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 9a4a6c9..041d41d 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -873,8 +873,10 @@
 	    !exthdrlen)
 		csummode = CHECKSUM_PARTIAL;
 
+	skb = skb_peek_tail(&sk->sk_write_queue);
+
 	inet->cork.length += length;
-	if (((length> mtu) || !skb_queue_empty(&sk->sk_write_queue)) &&
+	if (((length > mtu) || (skb && skb_is_gso(skb))) &&
 	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,
@@ -892,7 +894,7 @@
 	 * adding appropriate IP header.
 	 */
 
-	if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
+	if (!skb)
 		goto alloc_new_skb;
 
 	while (length > 0) {
@@ -1121,7 +1123,8 @@
 		return -EINVAL;
 
 	inet->cork.length += size;
-	if ((sk->sk_protocol == IPPROTO_UDP) &&
+	if ((size + skb->len > mtu) &&
+	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		skb_shinfo(skb)->gso_size = mtu - fragheaderlen;
 		skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 856123f..7f62735 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -267,8 +267,10 @@
 {
 	struct mr_table *mrt, *next;
 
-	list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list)
+	list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
+		list_del(&mrt->list);
 		kfree(mrt);
+	}
 	fib_rules_unregister(net->ipv4.mr_rules_ops);
 }
 #else
@@ -440,8 +442,10 @@
 	int err;
 
 	err = ipmr_fib_lookup(net, &fl, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	read_lock(&mrt_lock);
 	dev->stats.tx_bytes += skb->len;
@@ -1726,8 +1730,10 @@
 		goto dont_forward;
 
 	err = ipmr_fib_lookup(net, &skb_rtable(skb)->fl, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	if (!local) {
 		    if (IPCB(skb)->opt.router_alert) {
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 5c24db4..9f6b222 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -347,7 +347,7 @@
 					       { .sport = th->dest,
 						 .dport = th->source } } };
 		security_req_classify_flow(req, &fl);
-		if (ip_route_output_key(&init_net, &rt, &fl)) {
+		if (ip_route_output_key(sock_net(sk), &rt, &fl)) {
 			reqsk_free(req);
 			goto out;
 		}
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6596b4f..65afeae 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -608,6 +608,7 @@
 	ssize_t spliced;
 	int ret;
 
+	sock_rps_record_flow(sk);
 	/*
 	 * We can't seek on a socket input
 	 */
diff --git a/net/ipv4/tcp_hybla.c b/net/ipv4/tcp_hybla.c
index c209e05..377bc93 100644
--- a/net/ipv4/tcp_hybla.c
+++ b/net/ipv4/tcp_hybla.c
@@ -126,8 +126,8 @@
 		 * calculate 2^fract in a <<7 value.
 		 */
 		is_slowstart = 1;
-		increment = ((1 << ca->rho) * hybla_fraction(rho_fractions))
-			- 128;
+		increment = ((1 << min(ca->rho, 16U)) *
+			hybla_fraction(rho_fractions)) - 128;
 	} else {
 		/*
 		 * congestion avoidance
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 202cf09..fe193e5 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1555,6 +1555,7 @@
 #endif
 
 	if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
+		sock_rps_save_rxhash(sk, skb->rxhash);
 		TCP_CHECK_TIMER(sk);
 		if (tcp_rcv_established(sk, skb, tcp_hdr(skb), skb->len)) {
 			rsk = sk;
@@ -1579,7 +1580,9 @@
 			}
 			return 0;
 		}
-	}
+	} else
+		sock_rps_save_rxhash(sk, skb->rxhash);
+
 
 	TCP_CHECK_TIMER(sk);
 	if (tcp_rcv_state_process(sk, skb, tcp_hdr(skb), skb->len)) {
@@ -1672,8 +1675,6 @@
 
 	skb->dev = NULL;
 
-	sock_rps_save_rxhash(sk, skb->rxhash);
-
 	bh_lock_sock_nested(sk);
 	ret = 0;
 	if (!sock_owned_by_user(sk)) {
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index b4ed957..7ed9dc1 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2208,6 +2208,9 @@
 	int mib_idx;
 	int fwd_rexmitting = 0;
 
+	if (!tp->packets_out)
+		return;
+
 	if (!tp->lost_out)
 		tp->retransmit_high = tp->snd_una;
 
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 1705476..23883a4 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -108,6 +108,8 @@
 	u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
 
 	memset(fl, 0, sizeof(struct flowi));
+	fl->mark = skb->mark;
+
 	if (!(iph->frag_off & htons(IP_MF | IP_OFFSET))) {
 		switch (iph->protocol) {
 		case IPPROTO_UDP:
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e1a698d..784f34d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1760,7 +1760,10 @@
 
 	idev = ipv6_find_idev(dev);
 	if (!idev)
-		return NULL;
+		return ERR_PTR(-ENOBUFS);
+
+	if (idev->cnf.disable_ipv6)
+		return ERR_PTR(-EACCES);
 
 	/* Add default multicast route */
 	addrconf_add_mroute(dev);
@@ -2129,8 +2132,9 @@
 	if (!dev)
 		return -ENODEV;
 
-	if ((idev = addrconf_add_dev(dev)) == NULL)
-		return -ENOBUFS;
+	idev = addrconf_add_dev(dev);
+	if (IS_ERR(idev))
+		return PTR_ERR(idev);
 
 	scope = ipv6_addr_scope(pfx);
 
@@ -2377,7 +2381,7 @@
 	}
 
 	idev = addrconf_add_dev(dev);
-	if (idev == NULL)
+	if (IS_ERR(idev))
 		return;
 
 	memset(&addr, 0, sizeof(struct in6_addr));
@@ -2468,7 +2472,7 @@
 	ASSERT_RTNL();
 
 	idev = addrconf_add_dev(dev);
-	if (!idev) {
+	if (IS_ERR(idev)) {
 		printk(KERN_DEBUG "init ip6-ip6: add_dev failed\n");
 		return;
 	}
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index ce79929..03e62f9 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -483,7 +483,7 @@
 			      np->tclass, NULL, &fl, (struct rt6_info*)dst,
 			      MSG_DONTWAIT, np->dontfrag);
 	if (err) {
-		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
 		ip6_flush_pending_frames(sk);
 		goto out_put;
 	}
@@ -565,7 +565,7 @@
 				np->dontfrag);
 
 	if (err) {
-		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
 		ip6_flush_pending_frames(sk);
 		goto out_put;
 	}
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 073071f..66078da 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -120,7 +120,7 @@
 static void ipmr_expire_process(unsigned long arg);
 
 #ifdef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
-#define ip6mr_for_each_table(mrt, met) \
+#define ip6mr_for_each_table(mrt, net) \
 	list_for_each_entry_rcu(mrt, &net->ipv6.mr6_tables, list)
 
 static struct mr6_table *ip6mr_get_table(struct net *net, u32 id)
@@ -254,8 +254,10 @@
 {
 	struct mr6_table *mrt, *next;
 
-	list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list)
+	list_for_each_entry_safe(mrt, next, &net->ipv6.mr6_tables, list) {
+		list_del(&mrt->list);
 		ip6mr_free_table(mrt);
+	}
 	fib_rules_unregister(net->ipv6.mr6_rules_ops);
 }
 #else
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 59f1881..ab1622d 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1356,7 +1356,10 @@
 		     IPV6_TLV_PADN, 0 };
 
 	/* we assume size > sizeof(ra) here */
-	skb = sock_alloc_send_skb(sk, size + LL_ALLOCATED_SPACE(dev), 1, &err);
+	size += LL_ALLOCATED_SPACE(dev);
+	/* limit our allocations to order-0 page */
+	size = min_t(int, size, SKB_MAX_ORDER(0, 0));
+	skb = sock_alloc_send_skb(sk, size, 1, &err);
 
 	if (!skb)
 		return NULL;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 2794b60..d6e9599 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -347,11 +347,12 @@
 
 static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
 {
+	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
 	int err = rt2->rt_hdr.nexthdr;
 
 	spin_lock(&x->lock);
-	if (!ipv6_addr_equal(&rt2->addr, (struct in6_addr *)x->coaddr) &&
+	if (!ipv6_addr_equal(&iph->daddr, (struct in6_addr *)x->coaddr) &&
 	    !ipv6_addr_any((struct in6_addr *)x->coaddr))
 		err = -ENOENT;
 	spin_unlock(&x->lock);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 0abdc24..2efef52 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -586,6 +586,7 @@
 		src_addr = solicited_addr;
 		if (ifp->flags & IFA_F_OPTIMISTIC)
 			override = 0;
+		inc_opt |= ifp->idev->cnf.force_tllao;
 		in6_ifa_put(ifp);
 	} else {
 		if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
@@ -599,7 +600,6 @@
 	icmp6h.icmp6_solicited = solicited;
 	icmp6h.icmp6_override = override;
 
-	inc_opt |= ifp->idev->cnf.force_tllao;
 	__ndisc_send(dev, neigh, daddr, src_addr,
 		     &icmp6h, solicited_addr,
 		     inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 47d2277..2933396 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -97,9 +97,11 @@
 	fl.fl_ip_dport = otcph.source;
 	security_skb_classify_flow(oldskb, &fl);
 	dst = ip6_route_output(net, NULL, &fl);
-	if (dst == NULL)
+	if (dst == NULL || dst->error) {
+		dst_release(dst);
 		return;
-	if (dst->error || xfrm_lookup(net, &dst, &fl, NULL, 0))
+	}
+	if (xfrm_lookup(net, &dst, &fl, NULL, 0))
 		return;
 
 	hh_len = (dst->dev->hard_header_len + 15)&~15;
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 4a0e77e..6baeabb 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -124,6 +124,8 @@
 	u8 nexthdr = nh[IP6CB(skb)->nhoff];
 
 	memset(fl, 0, sizeof(struct flowi));
+	fl->mark = skb->mark;
+
 	ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
 	ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
 
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index c163d0a..98258b7 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -332,14 +332,16 @@
 		IEEE80211_QUEUE_STOP_REASON_AGGREGATION);
 
 	spin_unlock(&local->ampdu_lock);
-	spin_unlock_bh(&sta->lock);
 
-	/* send an addBA request */
+	/* prepare tid data */
 	sta->ampdu_mlme.dialog_token_allocator++;
 	sta->ampdu_mlme.tid_tx[tid]->dialog_token =
 			sta->ampdu_mlme.dialog_token_allocator;
 	sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
 
+	spin_unlock_bh(&sta->lock);
+
+	/* send AddBA request */
 	ieee80211_send_addba_request(sdata, pubsta->addr, tid,
 			 sta->ampdu_mlme.tid_tx[tid]->dialog_token,
 			 sta->ampdu_mlme.tid_tx[tid]->ssn,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index c7000a6..67ee34f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -632,7 +632,7 @@
 	skb->dev = sta->sdata->dev;
 	skb->protocol = eth_type_trans(skb, sta->sdata->dev);
 	memset(skb->cb, 0, sizeof(skb->cb));
-	netif_rx(skb);
+	netif_rx_ni(skb);
 }
 
 static void sta_apply_parameters(struct ieee80211_local *local,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 4f22713..9c1da08 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -349,7 +349,7 @@
 				struct survey_info *survey)
 {
 	int ret = -EOPNOTSUPP;
-	if (local->ops->conf_tx)
+	if (local->ops->get_survey)
 		ret = local->ops->get_survey(&local->hw, idx, survey);
 	/* trace_drv_get_survey(local, idx, survey, ret); */
 	return ret;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 0839c4e..f803f8b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1692,14 +1692,52 @@
 			rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
 			break;
 		case IEEE80211_STYPE_ACTION:
-			if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
-				break;
+			switch (mgmt->u.action.category) {
+			case WLAN_CATEGORY_BACK: {
+				struct ieee80211_local *local = sdata->local;
+				int len = skb->len;
+				struct sta_info *sta;
 
-			ieee80211_sta_process_chanswitch(sdata,
-					&mgmt->u.action.u.chan_switch.sw_elem,
-					(void *)ifmgd->associated->priv,
-					rx_status->mactime);
-			break;
+				rcu_read_lock();
+				sta = sta_info_get(sdata, mgmt->sa);
+				if (!sta) {
+					rcu_read_unlock();
+					break;
+				}
+
+				local_bh_disable();
+
+				switch (mgmt->u.action.u.addba_req.action_code) {
+				case WLAN_ACTION_ADDBA_REQ:
+					if (len < (IEEE80211_MIN_ACTION_SIZE +
+						   sizeof(mgmt->u.action.u.addba_req)))
+						break;
+					ieee80211_process_addba_request(local, sta, mgmt, len);
+					break;
+				case WLAN_ACTION_ADDBA_RESP:
+					if (len < (IEEE80211_MIN_ACTION_SIZE +
+						   sizeof(mgmt->u.action.u.addba_resp)))
+						break;
+					ieee80211_process_addba_resp(local, sta, mgmt, len);
+					break;
+				case WLAN_ACTION_DELBA:
+					if (len < (IEEE80211_MIN_ACTION_SIZE +
+						   sizeof(mgmt->u.action.u.delba)))
+						break;
+					ieee80211_process_delba(sdata, sta, mgmt, len);
+					break;
+				}
+				local_bh_enable();
+				rcu_read_unlock();
+				break;
+				}
+			case WLAN_CATEGORY_SPECTRUM_MGMT:
+				ieee80211_sta_process_chanswitch(sdata,
+						&mgmt->u.action.u.chan_switch.sw_elem,
+						(void *)ifmgd->associated->priv,
+						rx_status->mactime);
+				break;
+			}
 		}
 		mutex_unlock(&ifmgd->mtx);
 
@@ -1722,9 +1760,45 @@
 	mutex_unlock(&ifmgd->mtx);
 
 	if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
-	    (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
-		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+	    (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) {
+		struct ieee80211_local *local = sdata->local;
+		struct ieee80211_work *wk;
 
+		mutex_lock(&local->work_mtx);
+		list_for_each_entry(wk, &local->work_list, list) {
+			if (wk->sdata != sdata)
+				continue;
+
+			if (wk->type != IEEE80211_WORK_ASSOC)
+				continue;
+
+			if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
+				continue;
+			if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN))
+				continue;
+
+			/*
+			 * Printing the message only here means we can't
+			 * spuriously print it, but it also means that it
+			 * won't be printed when the frame comes in before
+			 * we even tried to associate or in similar cases.
+			 *
+			 * Ultimately, I suspect cfg80211 should print the
+			 * messages instead.
+			 */
+			printk(KERN_DEBUG
+			       "%s: deauthenticated from %pM (Reason: %u)\n",
+			       sdata->name, mgmt->bssid,
+			       le16_to_cpu(mgmt->u.deauth.reason_code));
+
+			list_del_rcu(&wk->list);
+			free_work(wk);
+			break;
+		}
+		mutex_unlock(&local->work_mtx);
+
+		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+	}
  out:
 	kfree_skb(skb);
 }
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6e2a7bc..be9abc2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1818,17 +1818,26 @@
 		return RX_CONTINUE;
 
 	if (ieee80211_is_back_req(bar->frame_control)) {
+		struct {
+			__le16 control, start_seq_num;
+		} __packed bar_data;
+
 		if (!rx->sta)
 			return RX_DROP_MONITOR;
+
+		if (skb_copy_bits(skb, offsetof(struct ieee80211_bar, control),
+				  &bar_data, sizeof(bar_data)))
+			return RX_DROP_MONITOR;
+
 		spin_lock(&rx->sta->lock);
-		tid = le16_to_cpu(bar->control) >> 12;
+		tid = le16_to_cpu(bar_data.control) >> 12;
 		if (!rx->sta->ampdu_mlme.tid_active_rx[tid]) {
 			spin_unlock(&rx->sta->lock);
 			return RX_DROP_MONITOR;
 		}
 		tid_agg_rx = rx->sta->ampdu_mlme.tid_rx[tid];
 
-		start_seq_num = le16_to_cpu(bar->start_seq_num) >> 4;
+		start_seq_num = le16_to_cpu(bar_data.start_seq_num) >> 4;
 
 		/* reset session timer */
 		if (tid_agg_rx->timeout)
@@ -1935,6 +1944,9 @@
 		if (len < IEEE80211_MIN_ACTION_SIZE + 1)
 			break;
 
+		if (sdata->vif.type == NL80211_IFTYPE_STATION)
+			return ieee80211_sta_rx_mgmt(sdata, rx->skb);
+
 		switch (mgmt->u.action.u.addba_req.action_code) {
 		case WLAN_ACTION_ADDBA_REQ:
 			if (len < (IEEE80211_MIN_ACTION_SIZE +
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index be3d4a69..b025dc7 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -715,7 +715,7 @@
 	struct ieee80211_rx_status *rx_status;
 	struct ieee80211_mgmt *mgmt;
 	struct ieee80211_work *wk;
-	enum work_action rma;
+	enum work_action rma = WORK_ACT_NONE;
 	u16 fc;
 
 	rx_status = (struct ieee80211_rx_status *) skb->cb;
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index d8f7e8e..ff04e9e 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -162,6 +162,7 @@
 	hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
 
 	ct_write_lock(hash);
+	spin_lock(&cp->lock);
 
 	if (!(cp->flags & IP_VS_CONN_F_HASHED)) {
 		list_add(&cp->c_list, &ip_vs_conn_tab[hash]);
@@ -174,6 +175,7 @@
 		ret = 0;
 	}
 
+	spin_unlock(&cp->lock);
 	ct_write_unlock(hash);
 
 	return ret;
@@ -193,6 +195,7 @@
 	hash = ip_vs_conn_hashkey(cp->af, cp->protocol, &cp->caddr, cp->cport);
 
 	ct_write_lock(hash);
+	spin_lock(&cp->lock);
 
 	if (cp->flags & IP_VS_CONN_F_HASHED) {
 		list_del(&cp->c_list);
@@ -202,6 +205,7 @@
 	} else
 		ret = 0;
 
+	spin_unlock(&cp->lock);
 	ct_write_unlock(hash);
 
 	return ret;
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 94d72e8..b2a3ae6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -698,6 +698,7 @@
 		newsk = NULL;
 		goto out;
 	}
+	kfree_skb(oskb);
 
 	sock_hold(sk);
 	pep_sk(newsk)->listener = sk;
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index c0b6863..1980b71 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -33,6 +33,7 @@
 static struct tcf_common *tcf_mirred_ht[MIRRED_TAB_MASK + 1];
 static u32 mirred_idx_gen;
 static DEFINE_RWLOCK(mirred_lock);
+static LIST_HEAD(mirred_list);
 
 static struct tcf_hashinfo mirred_hash_info = {
 	.htab	=	tcf_mirred_ht,
@@ -47,7 +48,9 @@
 			m->tcf_bindcnt--;
 		m->tcf_refcnt--;
 		if(!m->tcf_bindcnt && m->tcf_refcnt <= 0) {
-			dev_put(m->tcfm_dev);
+			list_del(&m->tcfm_list);
+			if (m->tcfm_dev)
+				dev_put(m->tcfm_dev);
 			tcf_hash_destroy(&m->common, &mirred_hash_info);
 			return 1;
 		}
@@ -134,8 +137,10 @@
 		m->tcfm_ok_push = ok_push;
 	}
 	spin_unlock_bh(&m->tcf_lock);
-	if (ret == ACT_P_CREATED)
+	if (ret == ACT_P_CREATED) {
+		list_add(&m->tcfm_list, &mirred_list);
 		tcf_hash_insert(pc, &mirred_hash_info);
+	}
 
 	return ret;
 }
@@ -162,9 +167,14 @@
 	m->tcf_tm.lastuse = jiffies;
 
 	dev = m->tcfm_dev;
+	if (!dev) {
+		printk_once(KERN_NOTICE "tc mirred: target device is gone\n");
+		goto out;
+	}
+
 	if (!(dev->flags & IFF_UP)) {
 		if (net_ratelimit())
-			pr_notice("tc mirred to Houston: device %s is gone!\n",
+			pr_notice("tc mirred to Houston: device %s is down\n",
 				  dev->name);
 		goto out;
 	}
@@ -232,6 +242,28 @@
 	return -1;
 }
 
+static int mirred_device_event(struct notifier_block *unused,
+			       unsigned long event, void *ptr)
+{
+	struct net_device *dev = ptr;
+	struct tcf_mirred *m;
+
+	if (event == NETDEV_UNREGISTER)
+		list_for_each_entry(m, &mirred_list, tcfm_list) {
+			if (m->tcfm_dev == dev) {
+				dev_put(dev);
+				m->tcfm_dev = NULL;
+			}
+		}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block mirred_device_notifier = {
+	.notifier_call = mirred_device_event,
+};
+
+
 static struct tc_action_ops act_mirred_ops = {
 	.kind		=	"mirred",
 	.hinfo		=	&mirred_hash_info,
@@ -252,12 +284,17 @@
 
 static int __init mirred_init_module(void)
 {
+	int err = register_netdevice_notifier(&mirred_device_notifier);
+	if (err)
+		return err;
+
 	pr_info("Mirror/redirect action on\n");
 	return tcf_register_action(&act_mirred_ops);
 }
 
 static void __exit mirred_cleanup_module(void)
 {
+	unregister_netdevice_notifier(&mirred_device_notifier);
 	tcf_unregister_action(&act_mirred_ops);
 }
 
diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c
index d885ba3..724553e 100644
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -159,6 +159,9 @@
 			iph->daddr = new_addr;
 
 		csum_replace4(&iph->check, addr, new_addr);
+	} else if ((iph->frag_off & htons(IP_OFFSET)) ||
+		   iph->protocol != IPPROTO_ICMP) {
+		goto out;
 	}
 
 	ihl = iph->ihl * 4;
@@ -202,7 +205,7 @@
 	{
 		struct icmphdr *icmph;
 
-		if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+		if (!pskb_may_pull(skb, ihl + sizeof(*icmph)))
 			goto drop;
 
 		icmph = (void *)(skb_network_header(skb) + ihl);
@@ -212,6 +215,9 @@
 		    (icmph->type != ICMP_PARAMETERPROB))
 			break;
 
+		if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+			goto drop;
+
 		iph = (void *)(icmph + 1);
 		if (egress)
 			addr = iph->daddr;
@@ -247,6 +253,7 @@
 		break;
 	}
 
+out:
 	return action;
 
 drop:
diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c
index fdbd0b7..50e3d94 100644
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -125,7 +125,7 @@
 {
 	struct tcf_pedit *p = a->priv;
 	int i, munged = 0;
-	u8 *pptr;
+	unsigned int off;
 
 	if (!(skb->tc_verd & TC_OK2MUNGE)) {
 		/* should we set skb->cloned? */
@@ -134,7 +134,7 @@
 		}
 	}
 
-	pptr = skb_network_header(skb);
+	off = skb_network_offset(skb);
 
 	spin_lock(&p->tcf_lock);
 
@@ -144,17 +144,17 @@
 		struct tc_pedit_key *tkey = p->tcfp_keys;
 
 		for (i = p->tcfp_nkeys; i > 0; i--, tkey++) {
-			u32 *ptr;
+			u32 *ptr, _data;
 			int offset = tkey->off;
 
 			if (tkey->offmask) {
-				if (skb->len > tkey->at) {
-					 char *j = pptr + tkey->at;
-					 offset += ((*j & tkey->offmask) >>
-						   tkey->shift);
-				} else {
+				char *d, _d;
+
+				d = skb_header_pointer(skb, off + tkey->at, 1,
+						       &_d);
+				if (!d)
 					goto bad;
-				}
+				offset += (*d & tkey->offmask) >> tkey->shift;
 			}
 
 			if (offset % 4) {
@@ -169,9 +169,13 @@
 				goto bad;
 			}
 
-			ptr = (u32 *)(pptr+offset);
+			ptr = skb_header_pointer(skb, off + offset, 4, &_data);
+			if (!ptr)
+				goto bad;
 			/* just do it, baby */
 			*ptr = ((*ptr & tkey->mask) ^ tkey->val);
+			if (ptr == &_data)
+				skb_store_bits(skb, off + offset, ptr, 4);
 			munged++;
 		}
 
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 9627542..4f52214 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -98,11 +98,11 @@
 {
 	struct {
 		struct tc_u_knode *knode;
-		u8		  *ptr;
+		unsigned int	  off;
 	} stack[TC_U32_MAXDEPTH];
 
 	struct tc_u_hnode *ht = (struct tc_u_hnode*)tp->root;
-	u8 *ptr = skb_network_header(skb);
+	unsigned int off = skb_network_offset(skb);
 	struct tc_u_knode *n;
 	int sdepth = 0;
 	int off2 = 0;
@@ -134,8 +134,14 @@
 #endif
 
 		for (i = n->sel.nkeys; i>0; i--, key++) {
+			unsigned int toff;
+			__be32 *data, _data;
 
-			if ((*(__be32*)(ptr+key->off+(off2&key->offmask))^key->val)&key->mask) {
+			toff = off + key->off + (off2 & key->offmask);
+			data = skb_header_pointer(skb, toff, 4, &_data);
+			if (!data)
+				goto out;
+			if ((*data ^ key->val) & key->mask) {
 				n = n->next;
 				goto next_knode;
 			}
@@ -174,29 +180,45 @@
 		if (sdepth >= TC_U32_MAXDEPTH)
 			goto deadloop;
 		stack[sdepth].knode = n;
-		stack[sdepth].ptr = ptr;
+		stack[sdepth].off = off;
 		sdepth++;
 
 		ht = n->ht_down;
 		sel = 0;
-		if (ht->divisor)
-			sel = ht->divisor&u32_hash_fold(*(__be32*)(ptr+n->sel.hoff), &n->sel,n->fshift);
+		if (ht->divisor) {
+			__be32 *data, _data;
 
+			data = skb_header_pointer(skb, off + n->sel.hoff, 4,
+						  &_data);
+			if (!data)
+				goto out;
+			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+							  n->fshift);
+		}
 		if (!(n->sel.flags&(TC_U32_VAROFFSET|TC_U32_OFFSET|TC_U32_EAT)))
 			goto next_ht;
 
 		if (n->sel.flags&(TC_U32_OFFSET|TC_U32_VAROFFSET)) {
 			off2 = n->sel.off + 3;
-			if (n->sel.flags&TC_U32_VAROFFSET)
-				off2 += ntohs(n->sel.offmask & *(__be16*)(ptr+n->sel.offoff)) >>n->sel.offshift;
+			if (n->sel.flags & TC_U32_VAROFFSET) {
+				__be16 *data, _data;
+
+				data = skb_header_pointer(skb,
+							  off + n->sel.offoff,
+							  2, &_data);
+				if (!data)
+					goto out;
+				off2 += ntohs(n->sel.offmask & *data) >>
+					n->sel.offshift;
+			}
 			off2 &= ~3;
 		}
 		if (n->sel.flags&TC_U32_EAT) {
-			ptr += off2;
+			off += off2;
 			off2 = 0;
 		}
 
-		if (ptr < skb_tail_pointer(skb))
+		if (off < skb->len)
 			goto next_ht;
 	}
 
@@ -204,9 +226,10 @@
 	if (sdepth--) {
 		n = stack[sdepth].knode;
 		ht = n->ht_up;
-		ptr = stack[sdepth].ptr;
+		off = stack[sdepth].off;
 		goto check_terminal;
 	}
+out:
 	return -1;
 
 deadloop:
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3415b6c..807643b 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -449,6 +449,7 @@
 	dev->tx_queue_len	= 100;
 	dev->flags		= IFF_NOARP;
 	dev->hard_header_len	= LL_MAX_HEADER;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static LIST_HEAD(master_dev_list);
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 73affb8..8dc47f1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -267,7 +267,7 @@
  * Run memory cache shrinker.
  */
 static int
-rpcauth_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+rpcauth_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	LIST_HEAD(free);
 	int res;
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 2a96751..7ca65c7 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -210,7 +210,8 @@
 	 * State of TCP reply receive
 	 */
 	__be32			tcp_fraghdr,
-				tcp_xid;
+				tcp_xid,
+				tcp_calldir;
 
 	u32			tcp_offset,
 				tcp_reclen;
@@ -927,7 +928,7 @@
 {
 	size_t len, used;
 	u32 offset;
-	__be32	calldir;
+	char *p;
 
 	/*
 	 * We want transport->tcp_offset to be 8 at the end of this routine
@@ -936,26 +937,33 @@
 	 * transport->tcp_offset is 4 (after having already read the xid).
 	 */
 	offset = transport->tcp_offset - sizeof(transport->tcp_xid);
-	len = sizeof(calldir) - offset;
+	len = sizeof(transport->tcp_calldir) - offset;
 	dprintk("RPC:       reading CALL/REPLY flag (%Zu bytes)\n", len);
-	used = xdr_skb_read_bits(desc, &calldir, len);
+	p = ((char *) &transport->tcp_calldir) + offset;
+	used = xdr_skb_read_bits(desc, p, len);
 	transport->tcp_offset += used;
 	if (used != len)
 		return;
 	transport->tcp_flags &= ~TCP_RCV_READ_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
-	transport->tcp_flags |= TCP_RCV_COPY_DATA;
 	/*
 	 * We don't yet have the XDR buffer, so we will write the calldir
 	 * out after we get the buffer from the 'struct rpc_rqst'
 	 */
-	if (ntohl(calldir) == RPC_REPLY)
+	switch (ntohl(transport->tcp_calldir)) {
+	case RPC_REPLY:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags |= TCP_RPC_REPLY;
-	else
+		break;
+	case RPC_CALL:
+		transport->tcp_flags |= TCP_RCV_COPY_CALLDIR;
+		transport->tcp_flags |= TCP_RCV_COPY_DATA;
 		transport->tcp_flags &= ~TCP_RPC_REPLY;
-	dprintk("RPC:       reading %s CALL/REPLY flag %08x\n",
-			(transport->tcp_flags & TCP_RPC_REPLY) ?
-				"reply for" : "request with", calldir);
+		break;
+	default:
+		dprintk("RPC:       invalid request message type\n");
+		xprt_force_disconnect(&transport->xprt);
+	}
 	xs_tcp_check_fraghdr(transport);
 }
 
@@ -975,12 +983,10 @@
 		/*
 		 * Save the RPC direction in the XDR buffer
 		 */
-		__be32	calldir = transport->tcp_flags & TCP_RPC_REPLY ?
-					htonl(RPC_REPLY) : 0;
-
 		memcpy(rcvbuf->head[0].iov_base + transport->tcp_copied,
-			&calldir, sizeof(calldir));
-		transport->tcp_copied += sizeof(calldir);
+			&transport->tcp_calldir,
+			sizeof(transport->tcp_calldir));
+		transport->tcp_copied += sizeof(transport->tcp_calldir);
 		transport->tcp_flags &= ~TCP_RCV_COPY_CALLDIR;
 	}
 
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 6a32915..a3cca0a 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -95,13 +95,13 @@
 			goto error_nolock;
 		}
 
-		dst = dst_pop(dst);
+		dst = skb_dst_pop(skb);
 		if (!dst) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTERROR);
 			err = -EHOSTUNREACH;
 			goto error_nolock;
 		}
-		skb_dst_set(skb, dst);
+		skb_dst_set_noref(skb, dst);
 		x = dst->xfrm;
 	} while (x && !(x->outer_mode->flags & XFRM_MODE_FLAG_TUNNEL));
 
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index d965a2b..a7ec5a8 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1594,8 +1594,8 @@
 
 	/* Try to instantiate a bundle */
 	err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
-	if (err < 0) {
-		if (err != -EAGAIN)
+	if (err <= 0) {
+		if (err != 0 && err != -EAGAIN)
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
 		return ERR_PTR(err);
 	}
@@ -1678,6 +1678,13 @@
 			goto make_dummy_bundle;
 		dst_hold(&xdst->u.dst);
 		return oldflo;
+	} else if (new_xdst == NULL) {
+		num_xfrms = 0;
+		if (oldflo == NULL)
+			goto make_dummy_bundle;
+		xdst->num_xfrms = 0;
+		dst_hold(&xdst->u.dst);
+		return oldflo;
 	}
 
 	/* Kill the previous bundle */
@@ -1760,6 +1767,10 @@
 				xfrm_pols_put(pols, num_pols);
 				err = PTR_ERR(xdst);
 				goto dropdst;
+			} else if (xdst == NULL) {
+				num_xfrms = 0;
+				drop_pols = num_pols;
+				goto no_transform;
 			}
 
 			spin_lock_bh(&xfrm_policy_sk_bundle_lock);
@@ -2153,6 +2164,7 @@
 		return 0;
 	}
 
+	skb_dst_force(skb);
 	dst = skb_dst(skb);
 
 	res = xfrm_lookup(net, &dst, &fl, NULL, 0) == 0;
@@ -2299,7 +2311,8 @@
 			return 0;
 		if (xdst->xfrm_genid != dst->xfrm->genid)
 			return 0;
-		if (xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
+		if (xdst->num_pols > 0 &&
+		    xdst->policy_genid != atomic_read(&xdst->pols[0]->genid))
 			return 0;
 
 		if (strict && fl &&
diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin
index 102a276..1adb974 100644
--- a/scripts/Makefile.modbuiltin
+++ b/scripts/Makefile.modbuiltin
@@ -14,6 +14,11 @@
 
 include scripts/Kbuild.include
 
+ifneq ($(KBUILD_SRC),)
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+endif
+
 # The filename Kbuild has precedence over Makefile
 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 7cdae39..7ea649d 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -219,7 +219,7 @@
 HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
 HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
 
-HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
 HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                           -D LKC_DIRECT_LINK
 
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index 115edb4..a9d9344 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -226,7 +226,7 @@
 		int len = get_line_length(line);
 		strncpy(tmp, line, min(len, x));
 		tmp[len] = '\0';
-		mvwprintw(win, i, 0, tmp);
+		mvwprintw(win, i, 0, "%s", tmp);
 	}
 }
 
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 3318692..f6127b9 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -503,6 +503,11 @@
 		    strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
 		    strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
 			return 1;
+	if (info->hdr->e_machine == EM_PPC64)
+		/* Special register function linked on all modules during final link of .ko */
+		if (strncmp(symname, "_restgpr0_", sizeof("_restgpr0_") - 1) == 0 ||
+		    strncmp(symname, "_savegpr0_", sizeof("_savegpr0_") - 1) == 0)
+			return 1;
 	/* Do not ignore this symbol */
 	return 0;
 }
@@ -1342,7 +1347,7 @@
 	int section = sechdr->sh_info;
 
 	return (void *)elf->hdr + sechdrs[section].sh_offset +
-		(r->r_offset - sechdrs[section].sh_addr);
+		r->r_offset - sechdrs[section].sh_addr;
 }
 
 static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 62fcc3a..d2c29b6 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -44,7 +44,7 @@
 	fi
 	$(MAKE) clean
 	$(PREV) ln -sf $(srctree) $(KERNELPATH)
-	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
+	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
 	$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
 	$(PREV) rm $(KERNELPATH)
 	rm -f $(objtree)/.scmversion
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 46989b8..64a9cb5 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,73 +10,162 @@
 #
 
 usage() {
-	echo "Usage: $0 [srctree]" >&2
+	echo "Usage: $0 [--save-scmversion] [srctree]" >&2
 	exit 1
 }
 
-cd "${1:-.}" || usage
+scm_only=false
+srctree=.
+if test "$1" = "--save-scmversion"; then
+	scm_only=true
+	shift
+fi
+if test $# -gt 0; then
+	srctree=$1
+	shift
+fi
+if test $# -gt 0 -o ! -d "$srctree"; then
+	usage
+fi
 
-# Check for git and a git repo.
-if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
+scm_version()
+{
+	local short
+	short=false
 
-	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
-	# because this version is defined in the top level Makefile.
-	if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+	cd "$srctree"
+	if test -e .scmversion; then
+		cat .scmversion
+		return
+	fi
+	if test "$1" = "--short"; then
+		short=true
+	fi
 
-		# If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
-		# we pretty print it.
-		if atag="`git describe 2>/dev/null`"; then
-			echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+	# Check for git and a git repo.
+	if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
 
-		# If we don't have a tag at all we print -g{commitish}.
-		else
-			printf '%s%s' -g $head
+		# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore
+		# it, because this version is defined in the top level Makefile.
+		if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+			# If only the short version is requested, don't bother
+			# running further git commands
+			if $short; then
+				echo "+"
+				return
+			fi
+			# If we are past a tagged commit (like
+			# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
+			if atag="`git describe 2>/dev/null`"; then
+				echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+			# If we don't have a tag at all we print -g{commitish}.
+			else
+				printf '%s%s' -g $head
+			fi
 		fi
+
+		# Is this git on svn?
+		if git config --get svn-remote.svn.url >/dev/null; then
+			printf -- '-svn%s' "`git svn find-rev $head`"
+		fi
+
+		# Update index only on r/w media
+		[ -w . ] && git update-index --refresh --unmerged > /dev/null
+
+		# Check for uncommitted changes
+		if git diff-index --name-only HEAD | grep -v "^scripts/package" \
+		    | read dummy; then
+			printf '%s' -dirty
+		fi
+
+		# All done with git
+		return
 	fi
 
-	# Is this git on svn?
-	if git config --get svn-remote.svn.url >/dev/null; then
-	        printf -- '-svn%s' "`git svn find-rev $head`"
+	# Check for mercurial and a mercurial repo.
+	if hgid=`hg id 2>/dev/null`; then
+		tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+
+		# Do we have an untagged version?
+		if [ -z "$tag" -o "$tag" = tip ]; then
+			id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
+			printf '%s%s' -hg "$id"
+		fi
+
+		# Are there uncommitted changes?
+		# These are represented by + after the changeset id.
+		case "$hgid" in
+			*+|*+\ *) printf '%s' -dirty ;;
+		esac
+
+		# All done with mercurial
+		return
 	fi
 
-	# Update index only on r/w media
-	[ -w . ] && git update-index --refresh --unmerged > /dev/null
+	# Check for svn and a svn repo.
+	if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
+		rev=`echo $rev | awk '{print $NF}'`
+		printf -- '-svn%s' "$rev"
 
-	# Check for uncommitted changes
-	if git diff-index --name-only HEAD | grep -v "^scripts/package" \
-	    | read dummy; then
-		printf '%s' -dirty
+		# All done with svn
+		return
 	fi
+}
 
-	# All done with git
+collect_files()
+{
+	local file res
+
+	for file; do
+		case "$file" in
+		*\~*)
+			continue
+			;;
+		esac
+		if test -e "$file"; then
+			res="$res$(cat "$file")"
+		fi
+	done
+	echo "$res"
+}
+
+if $scm_only; then
+	if test ! -e .scmversion; then
+		res=$(scm_version)
+		echo "$res" >.scmversion
+	fi
 	exit
 fi
 
-# Check for mercurial and a mercurial repo.
-if hgid=`hg id 2>/dev/null`; then
-	tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+if test -e include/config/auto.conf; then
+	. include/config/auto.conf
+else
+	echo "Error: kernelrelease not valid - run 'make prepare' to update it"
+	exit 1
+fi
 
-	# Do we have an untagged version?
-	if [ -z "$tag" -o "$tag" = tip ]; then
-		id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
-		printf '%s%s' -hg "$id"
+# localversion* files in the build and source directory
+res="$(collect_files localversion*)"
+if test ! "$srctree" -ef .; then
+	res="$res$(collect_files "$srctree"/localversion*)"
+fi
+
+# CONFIG_LOCALVERSION and LOCALVERSION (if set)
+res="${res}${CONFIG_LOCALVERSION}${LOCALVERSION}"
+
+# scm version string if not at a tagged commit
+if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then
+	# full scm version string
+	res="$res$(scm_version)"
+else
+	# apped a plus sign if the repository is not in a clean tagged
+	# state and  LOCALVERSION= is not specified
+	if test "${LOCALVERSION+set}" != "set"; then
+		scm=$(scm_version --short)
+		res="$res${scm:++}"
 	fi
-
-	# Are there uncommitted changes?
-	# These are represented by + after the changeset id.
-	case "$hgid" in
-		*+|*+\ *) printf '%s' -dirty ;;
-	esac
-
-	# All done with mercurial
-	exit
 fi
 
-# Check for svn and a svn repo.
-if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
-	rev=`echo $rev | awk '{print $NF}'`
-	printf -- '-svn%s' "$rev"
-
-	# All done with svn
-	exit
-fi
+echo "$res"
diff --git a/security/Kconfig b/security/Kconfig
index 226b955..bd72ae6 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -140,6 +140,7 @@
 source security/selinux/Kconfig
 source security/smack/Kconfig
 source security/tomoyo/Kconfig
+source security/apparmor/Kconfig
 
 source security/integrity/ima/Kconfig
 
@@ -148,6 +149,7 @@
 	default DEFAULT_SECURITY_SELINUX if SECURITY_SELINUX
 	default DEFAULT_SECURITY_SMACK if SECURITY_SMACK
 	default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
+	default DEFAULT_SECURITY_APPARMOR if SECURITY_APPARMOR
 	default DEFAULT_SECURITY_DAC
 
 	help
@@ -163,6 +165,9 @@
 	config DEFAULT_SECURITY_TOMOYO
 		bool "TOMOYO" if SECURITY_TOMOYO=y
 
+	config DEFAULT_SECURITY_APPARMOR
+		bool "AppArmor" if SECURITY_APPARMOR=y
+
 	config DEFAULT_SECURITY_DAC
 		bool "Unix Discretionary Access Controls"
 
@@ -173,6 +178,7 @@
 	default "selinux" if DEFAULT_SECURITY_SELINUX
 	default "smack" if DEFAULT_SECURITY_SMACK
 	default "tomoyo" if DEFAULT_SECURITY_TOMOYO
+	default "apparmor" if DEFAULT_SECURITY_APPARMOR
 	default "" if DEFAULT_SECURITY_DAC
 
 endmenu
diff --git a/security/Makefile b/security/Makefile
index da20a19..8bb0fe9 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -6,6 +6,7 @@
 subdir-$(CONFIG_SECURITY_SELINUX)	+= selinux
 subdir-$(CONFIG_SECURITY_SMACK)		+= smack
 subdir-$(CONFIG_SECURITY_TOMOYO)        += tomoyo
+subdir-$(CONFIG_SECURITY_APPARMOR)	+= apparmor
 
 # always enable default capabilities
 obj-y					+= commoncap.o
@@ -19,6 +20,7 @@
 obj-$(CONFIG_SECURITY_SMACK)		+= smack/built-in.o
 obj-$(CONFIG_AUDIT)			+= lsm_audit.o
 obj-$(CONFIG_SECURITY_TOMOYO)		+= tomoyo/built-in.o
+obj-$(CONFIG_SECURITY_APPARMOR)		+= apparmor/built-in.o
 obj-$(CONFIG_CGROUP_DEVICE)		+= device_cgroup.o
 
 # Object integrity file lists
diff --git a/security/apparmor/.gitignore b/security/apparmor/.gitignore
new file mode 100644
index 0000000..0a0a99f
--- /dev/null
+++ b/security/apparmor/.gitignore
@@ -0,0 +1,5 @@
+#
+# Generated include files
+#
+af_names.h
+capability_names.h
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
new file mode 100644
index 0000000..72555b9
--- /dev/null
+++ b/security/apparmor/Kconfig
@@ -0,0 +1,31 @@
+config SECURITY_APPARMOR
+	bool "AppArmor support"
+	depends on SECURITY
+	select AUDIT
+	select SECURITY_PATH
+	select SECURITYFS
+	select SECURITY_NETWORK
+	default n
+	help
+	  This enables the AppArmor security module.
+	  Required userspace tools (if they are not included in your
+	  distribution) and further information may be found at
+	  http://apparmor.wiki.kernel.org
+
+	  If you are unsure how to answer this question, answer N.
+
+config SECURITY_APPARMOR_BOOTPARAM_VALUE
+	int "AppArmor boot parameter default value"
+	depends on SECURITY_APPARMOR
+	range 0 1
+	default 1
+	help
+	  This option sets the default value for the kernel parameter
+	  'apparmor', which allows AppArmor to be enabled or disabled
+          at boot.  If this option is set to 0 (zero), the AppArmor
+	  kernel parameter will default to 0, disabling AppArmor at
+	  boot.  If this option is set to 1 (one), the AppArmor
+	  kernel parameter will default to 1, enabling AppArmor at
+	  boot.
+
+	  If you are unsure how to answer this question, answer 1.
diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile
new file mode 100644
index 0000000..f2048693
--- /dev/null
+++ b/security/apparmor/Makefile
@@ -0,0 +1,24 @@
+# Makefile for AppArmor Linux Security Module
+#
+obj-$(CONFIG_SECURITY_APPARMOR) += apparmor.o
+
+apparmor-y := apparmorfs.o audit.o capability.o context.o ipc.o lib.o match.o \
+              path.o domain.o policy.o policy_unpack.o procattr.o lsm.o \
+              resource.o sid.o file.o
+
+clean-files: capability_names.h af_names.h
+
+quiet_cmd_make-caps = GEN     $@
+cmd_make-caps = echo "static const char *capability_names[] = {" > $@ ; sed -n -e "/CAP_FS_MASK/d" -e "s/^\#define[ \\t]\\+CAP_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\$$/[\\2]  = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
+
+quiet_cmd_make-rlim = GEN     $@
+cmd_make-rlim = echo "static const char *rlim_names[] = {" > $@ ; sed -n --e "/AF_MAX/d" -e "s/^\# \\?define[ \\t]\\+RLIMIT_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/[\\2]  = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@ ; echo "static const int rlim_map[] = {" >> $@ ; sed -n -e "/AF_MAX/d" -e "s/^\# \\?define[ \\t]\\+\\(RLIMIT_[A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/\\1,/p" $< >> $@ ; echo "};" >> $@
+
+$(obj)/capability.o : $(obj)/capability_names.h
+$(obj)/resource.o : $(obj)/rlim_names.h
+$(obj)/capability_names.h : $(srctree)/include/linux/capability.h
+	$(call cmd,make-caps)
+$(obj)/af_names.h : $(srctree)/include/linux/socket.h
+	$(call cmd,make-af)
+$(obj)/rlim_names.h : $(srctree)/include/asm-generic/resource.h
+	$(call cmd,make-rlim)
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
new file mode 100644
index 0000000..7320331
--- /dev/null
+++ b/security/apparmor/apparmorfs.c
@@ -0,0 +1,239 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /sys/kernel/security/apparmor interface functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/security.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/namei.h>
+
+#include "include/apparmor.h"
+#include "include/apparmorfs.h"
+#include "include/audit.h"
+#include "include/context.h"
+#include "include/policy.h"
+
+/**
+ * aa_simple_write_to_buffer - common routine for getting policy from user
+ * @op: operation doing the user buffer copy
+ * @userbuf: user buffer to copy data from  (NOT NULL)
+ * @alloc_size: size of user buffer
+ * @copy_size: size of data to copy from user buffer
+ * @pos: position write is at in the file (NOT NULL)
+ *
+ * Returns: kernel buffer containing copy of user buffer data or an
+ *          ERR_PTR on failure.
+ */
+static char *aa_simple_write_to_buffer(int op, const char __user *userbuf,
+				       size_t alloc_size, size_t copy_size,
+				       loff_t *pos)
+{
+	char *data;
+
+	if (*pos != 0)
+		/* only writes from pos 0, that is complete writes */
+		return ERR_PTR(-ESPIPE);
+
+	/*
+	 * Don't allow profile load/replace/remove from profiles that don't
+	 * have CAP_MAC_ADMIN
+	 */
+	if (!aa_may_manage_policy(op))
+		return ERR_PTR(-EACCES);
+
+	/* freed by caller to simple_write_to_buffer */
+	data = kvmalloc(alloc_size);
+	if (data == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	if (copy_from_user(data, userbuf, copy_size)) {
+		kvfree(data);
+		return ERR_PTR(-EFAULT);
+	}
+
+	return data;
+}
+
+
+/* .load file hook fn to load policy */
+static ssize_t profile_load(struct file *f, const char __user *buf, size_t size,
+			    loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	data = aa_simple_write_to_buffer(OP_PROF_LOAD, buf, size, size, pos);
+
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		error = aa_replace_profiles(data, size, PROF_ADD);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_load = {
+	.write = profile_load
+};
+
+/* .replace file hook fn to load and/or replace policy */
+static ssize_t profile_replace(struct file *f, const char __user *buf,
+			       size_t size, loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	data = aa_simple_write_to_buffer(OP_PROF_REPL, buf, size, size, pos);
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		error = aa_replace_profiles(data, size, PROF_REPLACE);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_replace = {
+	.write = profile_replace
+};
+
+/* .remove file hook fn to remove loaded policy */
+static ssize_t profile_remove(struct file *f, const char __user *buf,
+			      size_t size, loff_t *pos)
+{
+	char *data;
+	ssize_t error;
+
+	/*
+	 * aa_remove_profile needs a null terminated string so 1 extra
+	 * byte is allocated and the copied data is null terminated.
+	 */
+	data = aa_simple_write_to_buffer(OP_PROF_RM, buf, size + 1, size, pos);
+
+	error = PTR_ERR(data);
+	if (!IS_ERR(data)) {
+		data[size] = 0;
+		error = aa_remove_profiles(data, size);
+		kvfree(data);
+	}
+
+	return error;
+}
+
+static const struct file_operations aa_fs_profile_remove = {
+	.write = profile_remove
+};
+
+/** Base file system setup **/
+
+static struct dentry *aa_fs_dentry __initdata;
+
+static void __init aafs_remove(const char *name)
+{
+	struct dentry *dentry;
+
+	dentry = lookup_one_len(name, aa_fs_dentry, strlen(name));
+	if (!IS_ERR(dentry)) {
+		securityfs_remove(dentry);
+		dput(dentry);
+	}
+}
+
+/**
+ * aafs_create - create an entry in the apparmor filesystem
+ * @name: name of the entry (NOT NULL)
+ * @mask: file permission mask of the file
+ * @fops: file operations for the file (NOT NULL)
+ *
+ * Used aafs_remove to remove entries created with this fn.
+ */
+static int __init aafs_create(const char *name, int mask,
+			      const struct file_operations *fops)
+{
+	struct dentry *dentry;
+
+	dentry = securityfs_create_file(name, S_IFREG | mask, aa_fs_dentry,
+					NULL, fops);
+
+	return IS_ERR(dentry) ? PTR_ERR(dentry) : 0;
+}
+
+/**
+ * aa_destroy_aafs - cleanup and free aafs
+ *
+ * releases dentries allocated by aa_create_aafs
+ */
+void __init aa_destroy_aafs(void)
+{
+	if (aa_fs_dentry) {
+		aafs_remove(".remove");
+		aafs_remove(".replace");
+		aafs_remove(".load");
+
+		securityfs_remove(aa_fs_dentry);
+		aa_fs_dentry = NULL;
+	}
+}
+
+/**
+ * aa_create_aafs - create the apparmor security filesystem
+ *
+ * dentries created here are released by aa_destroy_aafs
+ *
+ * Returns: error on failure
+ */
+int __init aa_create_aafs(void)
+{
+	int error;
+
+	if (!apparmor_initialized)
+		return 0;
+
+	if (aa_fs_dentry) {
+		AA_ERROR("%s: AppArmor securityfs already exists\n", __func__);
+		return -EEXIST;
+	}
+
+	aa_fs_dentry = securityfs_create_dir("apparmor", NULL);
+	if (IS_ERR(aa_fs_dentry)) {
+		error = PTR_ERR(aa_fs_dentry);
+		aa_fs_dentry = NULL;
+		goto error;
+	}
+
+	error = aafs_create(".load", 0640, &aa_fs_profile_load);
+	if (error)
+		goto error;
+	error = aafs_create(".replace", 0640, &aa_fs_profile_replace);
+	if (error)
+		goto error;
+	error = aafs_create(".remove", 0640, &aa_fs_profile_remove);
+	if (error)
+		goto error;
+
+	/* TODO: add support for apparmorfs_null and apparmorfs_mnt */
+
+	/* Report that AppArmor fs is enabled */
+	aa_info_message("AppArmor Filesystem Enabled");
+	return 0;
+
+error:
+	aa_destroy_aafs();
+	AA_ERROR("Error creating AppArmor securityfs\n");
+	return error;
+}
+
+fs_initcall(aa_create_aafs);
diff --git a/security/apparmor/audit.c b/security/apparmor/audit.c
new file mode 100644
index 0000000..96502b2
--- /dev/null
+++ b/security/apparmor/audit.c
@@ -0,0 +1,215 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor auditing functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/audit.h>
+#include <linux/socket.h>
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/policy.h"
+
+const char *op_table[] = {
+	"null",
+
+	"sysctl",
+	"capable",
+
+	"unlink",
+	"mkdir",
+	"rmdir",
+	"mknod",
+	"truncate",
+	"link",
+	"symlink",
+	"rename_src",
+	"rename_dest",
+	"chmod",
+	"chown",
+	"getattr",
+	"open",
+
+	"file_perm",
+	"file_lock",
+	"file_mmap",
+	"file_mprotect",
+
+	"create",
+	"post_create",
+	"bind",
+	"connect",
+	"listen",
+	"accept",
+	"sendmsg",
+	"recvmsg",
+	"getsockname",
+	"getpeername",
+	"getsockopt",
+	"setsockopt",
+	"socket_shutdown",
+
+	"ptrace",
+
+	"exec",
+	"change_hat",
+	"change_profile",
+	"change_onexec",
+
+	"setprocattr",
+	"setrlimit",
+
+	"profile_replace",
+	"profile_load",
+	"profile_remove"
+};
+
+const char *audit_mode_names[] = {
+	"normal",
+	"quiet_denied",
+	"quiet",
+	"noquiet",
+	"all"
+};
+
+static char *aa_audit_type[] = {
+	"AUDIT",
+	"ALLOWED",
+	"DENIED",
+	"HINT",
+	"STATUS",
+	"ERROR",
+	"KILLED"
+};
+
+/*
+ * Currently AppArmor auditing is fed straight into the audit framework.
+ *
+ * TODO:
+ * netlink interface for complain mode
+ * user auditing, - send user auditing to netlink interface
+ * system control of whether user audit messages go to system log
+ */
+
+/**
+ * audit_base - core AppArmor function.
+ * @ab: audit buffer to fill (NOT NULL)
+ * @ca: audit structure containing data to audit (NOT NULL)
+ *
+ * Record common AppArmor audit data from @sa
+ */
+static void audit_pre(struct audit_buffer *ab, void *ca)
+{
+	struct common_audit_data *sa = ca;
+	struct task_struct *tsk = sa->tsk ? sa->tsk : current;
+
+	if (aa_g_audit_header) {
+		audit_log_format(ab, "apparmor=");
+		audit_log_string(ab, aa_audit_type[sa->aad.type]);
+	}
+
+	if (sa->aad.op) {
+		audit_log_format(ab, " operation=");
+		audit_log_string(ab, op_table[sa->aad.op]);
+	}
+
+	if (sa->aad.info) {
+		audit_log_format(ab, " info=");
+		audit_log_string(ab, sa->aad.info);
+		if (sa->aad.error)
+			audit_log_format(ab, " error=%d", sa->aad.error);
+	}
+
+	if (sa->aad.profile) {
+		struct aa_profile *profile = sa->aad.profile;
+		pid_t pid;
+		rcu_read_lock();
+		pid = tsk->real_parent->pid;
+		rcu_read_unlock();
+		audit_log_format(ab, " parent=%d", pid);
+		if (profile->ns != root_ns) {
+			audit_log_format(ab, " namespace=");
+			audit_log_untrustedstring(ab, profile->ns->base.hname);
+		}
+		audit_log_format(ab, " profile=");
+		audit_log_untrustedstring(ab, profile->base.hname);
+	}
+
+	if (sa->aad.name) {
+		audit_log_format(ab, " name=");
+		audit_log_untrustedstring(ab, sa->aad.name);
+	}
+}
+
+/**
+ * aa_audit_msg - Log a message to the audit subsystem
+ * @sa: audit event structure (NOT NULL)
+ * @cb: optional callback fn for type specific fields (MAYBE NULL)
+ */
+void aa_audit_msg(int type, struct common_audit_data *sa,
+		  void (*cb) (struct audit_buffer *, void *))
+{
+	sa->aad.type = type;
+	sa->lsm_pre_audit = audit_pre;
+	sa->lsm_post_audit = cb;
+	common_lsm_audit(sa);
+}
+
+/**
+ * aa_audit - Log a profile based audit event to the audit subsystem
+ * @type: audit type for the message
+ * @profile: profile to check against (NOT NULL)
+ * @gfp: allocation flags to use
+ * @sa: audit event (NOT NULL)
+ * @cb: optional callback fn for type specific fields (MAYBE NULL)
+ *
+ * Handle default message switching based off of audit mode flags
+ *
+ * Returns: error on failure
+ */
+int aa_audit(int type, struct aa_profile *profile, gfp_t gfp,
+	     struct common_audit_data *sa,
+	     void (*cb) (struct audit_buffer *, void *))
+{
+	BUG_ON(!profile);
+
+	if (type == AUDIT_APPARMOR_AUTO) {
+		if (likely(!sa->aad.error)) {
+			if (AUDIT_MODE(profile) != AUDIT_ALL)
+				return 0;
+			type = AUDIT_APPARMOR_AUDIT;
+		} else if (COMPLAIN_MODE(profile))
+			type = AUDIT_APPARMOR_ALLOWED;
+		else
+			type = AUDIT_APPARMOR_DENIED;
+	}
+	if (AUDIT_MODE(profile) == AUDIT_QUIET ||
+	    (type == AUDIT_APPARMOR_DENIED &&
+	     AUDIT_MODE(profile) == AUDIT_QUIET))
+		return sa->aad.error;
+
+	if (KILL_MODE(profile) && type == AUDIT_APPARMOR_DENIED)
+		type = AUDIT_APPARMOR_KILL;
+
+	if (!unconfined(profile))
+		sa->aad.profile = profile;
+
+	aa_audit_msg(type, sa, cb);
+
+	if (sa->aad.type == AUDIT_APPARMOR_KILL)
+		(void)send_sig_info(SIGKILL, NULL, sa->tsk ? sa->tsk : current);
+
+	if (sa->aad.type == AUDIT_APPARMOR_ALLOWED)
+		return complain_error(sa->aad.error);
+
+	return sa->aad.error;
+}
diff --git a/security/apparmor/capability.c b/security/apparmor/capability.c
new file mode 100644
index 0000000..9982c48
--- /dev/null
+++ b/security/apparmor/capability.c
@@ -0,0 +1,141 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor capability mediation functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+
+#include "include/apparmor.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/policy.h"
+#include "include/audit.h"
+
+/*
+ * Table of capability names: we generate it from capabilities.h.
+ */
+#include "capability_names.h"
+
+struct audit_cache {
+	struct aa_profile *profile;
+	kernel_cap_t caps;
+};
+
+static DEFINE_PER_CPU(struct audit_cache, audit_cache);
+
+/**
+ * audit_cb - call back for capability components of audit struct
+ * @ab - audit buffer   (NOT NULL)
+ * @va - audit struct to audit data from  (NOT NULL)
+ */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	audit_log_format(ab, " capname=");
+	audit_log_untrustedstring(ab, capability_names[sa->u.cap]);
+}
+
+/**
+ * audit_caps - audit a capability
+ * @profile: profile confining task (NOT NULL)
+ * @task: task capability test was performed against (NOT NULL)
+ * @cap: capability tested
+ * @error: error code returned by test
+ *
+ * Do auditing of capability and handle, audit/complain/kill modes switching
+ * and duplicate message elimination.
+ *
+ * Returns: 0 or sa->error on success,  error code on failure
+ */
+static int audit_caps(struct aa_profile *profile, struct task_struct *task,
+		      int cap, int error)
+{
+	struct audit_cache *ent;
+	int type = AUDIT_APPARMOR_AUTO;
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, CAP);
+	sa.tsk = task;
+	sa.u.cap = cap;
+	sa.aad.op = OP_CAPABLE;
+	sa.aad.error = error;
+
+	if (likely(!error)) {
+		/* test if auditing is being forced */
+		if (likely((AUDIT_MODE(profile) != AUDIT_ALL) &&
+			   !cap_raised(profile->caps.audit, cap)))
+			return 0;
+		type = AUDIT_APPARMOR_AUDIT;
+	} else if (KILL_MODE(profile) ||
+		   cap_raised(profile->caps.kill, cap)) {
+		type = AUDIT_APPARMOR_KILL;
+	} else if (cap_raised(profile->caps.quiet, cap) &&
+		   AUDIT_MODE(profile) != AUDIT_NOQUIET &&
+		   AUDIT_MODE(profile) != AUDIT_ALL) {
+		/* quiet auditing */
+		return error;
+	}
+
+	/* Do simple duplicate message elimination */
+	ent = &get_cpu_var(audit_cache);
+	if (profile == ent->profile && cap_raised(ent->caps, cap)) {
+		put_cpu_var(audit_cache);
+		if (COMPLAIN_MODE(profile))
+			return complain_error(error);
+		return error;
+	} else {
+		aa_put_profile(ent->profile);
+		ent->profile = aa_get_profile(profile);
+		cap_raise(ent->caps, cap);
+	}
+	put_cpu_var(audit_cache);
+
+	return aa_audit(type, profile, GFP_ATOMIC, &sa, audit_cb);
+}
+
+/**
+ * profile_capable - test if profile allows use of capability @cap
+ * @profile: profile being enforced    (NOT NULL, NOT unconfined)
+ * @cap: capability to test if allowed
+ *
+ * Returns: 0 if allowed else -EPERM
+ */
+static int profile_capable(struct aa_profile *profile, int cap)
+{
+	return cap_raised(profile->caps.allow, cap) ? 0 : -EPERM;
+}
+
+/**
+ * aa_capable - test permission to use capability
+ * @task: task doing capability test against (NOT NULL)
+ * @profile: profile confining @task (NOT NULL)
+ * @cap: capability to be tested
+ * @audit: whether an audit record should be generated
+ *
+ * Look up capability in profile capability set.
+ *
+ * Returns: 0 on success, or else an error code.
+ */
+int aa_capable(struct task_struct *task, struct aa_profile *profile, int cap,
+	       int audit)
+{
+	int error = profile_capable(profile, cap);
+
+	if (!audit) {
+		if (COMPLAIN_MODE(profile))
+			return complain_error(error);
+		return error;
+	}
+
+	return audit_caps(profile, task, cap, error);
+}
diff --git a/security/apparmor/context.c b/security/apparmor/context.c
new file mode 100644
index 0000000..8a9b502
--- /dev/null
+++ b/security/apparmor/context.c
@@ -0,0 +1,216 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor functions used to manipulate object security
+ * contexts.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor sets confinement on every task, via the the aa_task_cxt and
+ * the aa_task_cxt.profile, both of which are required and are not allowed
+ * to be NULL.  The aa_task_cxt is not reference counted and is unique
+ * to each cred (which is reference count).  The profile pointed to by
+ * the task_cxt is reference counted.
+ *
+ * TODO
+ * If a task uses change_hat it currently does not return to the old
+ * cred or task context but instead creates a new one.  Ideally the task
+ * should return to the previous cred if it has not been modified.
+ *
+ */
+
+#include "include/context.h"
+#include "include/policy.h"
+
+/**
+ * aa_alloc_task_context - allocate a new task_cxt
+ * @flags: gfp flags for allocation
+ *
+ * Returns: allocated buffer or NULL on failure
+ */
+struct aa_task_cxt *aa_alloc_task_context(gfp_t flags)
+{
+	return kzalloc(sizeof(struct aa_task_cxt), flags);
+}
+
+/**
+ * aa_free_task_context - free a task_cxt
+ * @cxt: task_cxt to free (MAYBE NULL)
+ */
+void aa_free_task_context(struct aa_task_cxt *cxt)
+{
+	if (cxt) {
+		aa_put_profile(cxt->profile);
+		aa_put_profile(cxt->previous);
+		aa_put_profile(cxt->onexec);
+
+		kzfree(cxt);
+	}
+}
+
+/**
+ * aa_dup_task_context - duplicate a task context, incrementing reference counts
+ * @new: a blank task context      (NOT NULL)
+ * @old: the task context to copy  (NOT NULL)
+ */
+void aa_dup_task_context(struct aa_task_cxt *new, const struct aa_task_cxt *old)
+{
+	*new = *old;
+	aa_get_profile(new->profile);
+	aa_get_profile(new->previous);
+	aa_get_profile(new->onexec);
+}
+
+/**
+ * aa_replace_current_profile - replace the current tasks profiles
+ * @profile: new profile  (NOT NULL)
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_replace_current_profile(struct aa_profile *profile)
+{
+	struct aa_task_cxt *cxt = current_cred()->security;
+	struct cred *new;
+	BUG_ON(!profile);
+
+	if (cxt->profile == profile)
+		return 0;
+
+	new  = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	if (unconfined(profile) || (cxt->profile->ns != profile->ns)) {
+		/* if switching to unconfined or a different profile namespace
+		 * clear out context state
+		 */
+		aa_put_profile(cxt->previous);
+		aa_put_profile(cxt->onexec);
+		cxt->previous = NULL;
+		cxt->onexec = NULL;
+		cxt->token = 0;
+	}
+	/* be careful switching cxt->profile, when racing replacement it
+	 * is possible that cxt->profile->replacedby is the reference keeping
+	 * @profile valid, so make sure to get its reference before dropping
+	 * the reference on cxt->profile */
+	aa_get_profile(profile);
+	aa_put_profile(cxt->profile);
+	cxt->profile = profile;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_set_current_onexec - set the tasks change_profile to happen onexec
+ * @profile: system profile to set at exec  (MAYBE NULL to clear value)
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_set_current_onexec(struct aa_profile *profile)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	aa_get_profile(profile);
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = profile;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_set_current_hat - set the current tasks hat
+ * @profile: profile to set as the current hat  (NOT NULL)
+ * @token: token value that must be specified to change from the hat
+ *
+ * Do switch of tasks hat.  If the task is currently in a hat
+ * validate the token to match.
+ *
+ * Returns: 0 or error on failure
+ */
+int aa_set_current_hat(struct aa_profile *profile, u64 token)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+	BUG_ON(!profile);
+
+	cxt = new->security;
+	if (!cxt->previous) {
+		/* transfer refcount */
+		cxt->previous = cxt->profile;
+		cxt->token = token;
+	} else if (cxt->token == token) {
+		aa_put_profile(cxt->profile);
+	} else {
+		/* previous_profile && cxt->token != token */
+		abort_creds(new);
+		return -EACCES;
+	}
+	cxt->profile = aa_get_profile(aa_newest_version(profile));
+	/* clear exec on switching context */
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = NULL;
+
+	commit_creds(new);
+	return 0;
+}
+
+/**
+ * aa_restore_previous_profile - exit from hat context restoring the profile
+ * @token: the token that must be matched to exit hat context
+ *
+ * Attempt to return out of a hat to the previous profile.  The token
+ * must match the stored token value.
+ *
+ * Returns: 0 or error of failure
+ */
+int aa_restore_previous_profile(u64 token)
+{
+	struct aa_task_cxt *cxt;
+	struct cred *new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	cxt = new->security;
+	if (cxt->token != token) {
+		abort_creds(new);
+		return -EACCES;
+	}
+	/* ignore restores when there is no saved profile */
+	if (!cxt->previous) {
+		abort_creds(new);
+		return 0;
+	}
+
+	aa_put_profile(cxt->profile);
+	cxt->profile = aa_newest_version(cxt->previous);
+	BUG_ON(!cxt->profile);
+	if (unlikely(cxt->profile != cxt->previous)) {
+		aa_get_profile(cxt->profile);
+		aa_put_profile(cxt->previous);
+	}
+	/* clear exec && prev information when restoring to previous context */
+	cxt->previous = NULL;
+	cxt->token = 0;
+	aa_put_profile(cxt->onexec);
+	cxt->onexec = NULL;
+
+	commit_creds(new);
+	return 0;
+}
diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c
new file mode 100644
index 0000000..c825c6e
--- /dev/null
+++ b/security/apparmor/domain.c
@@ -0,0 +1,823 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy attachment and domain transitions
+ *
+ * Copyright (C) 2002-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/errno.h>
+#include <linux/fdtable.h>
+#include <linux/file.h>
+#include <linux/mount.h>
+#include <linux/syscalls.h>
+#include <linux/tracehook.h>
+#include <linux/personality.h>
+
+#include "include/audit.h"
+#include "include/apparmorfs.h"
+#include "include/context.h"
+#include "include/domain.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+/**
+ * aa_free_domain_entries - free entries in a domain table
+ * @domain: the domain table to free  (MAYBE NULL)
+ */
+void aa_free_domain_entries(struct aa_domain *domain)
+{
+	int i;
+	if (domain) {
+		if (!domain->table)
+			return;
+
+		for (i = 0; i < domain->size; i++)
+			kzfree(domain->table[i]);
+		kzfree(domain->table);
+		domain->table = NULL;
+	}
+}
+
+/**
+ * may_change_ptraced_domain - check if can change profile on ptraced task
+ * @task: task we want to change profile of   (NOT NULL)
+ * @to_profile: profile to change to  (NOT NULL)
+ *
+ * Check if the task is ptraced and if so if the tracing task is allowed
+ * to trace the new domain
+ *
+ * Returns: %0 or error if change not allowed
+ */
+static int may_change_ptraced_domain(struct task_struct *task,
+				     struct aa_profile *to_profile)
+{
+	struct task_struct *tracer;
+	const struct cred *cred = NULL;
+	struct aa_profile *tracerp = NULL;
+	int error = 0;
+
+	rcu_read_lock();
+	tracer = tracehook_tracer_task(task);
+	if (tracer) {
+		/* released below */
+		cred = get_task_cred(tracer);
+		tracerp = aa_cred_profile(cred);
+	}
+	rcu_read_unlock();
+
+	/* not ptraced */
+	if (!tracer || unconfined(tracerp))
+		goto out;
+
+	error = aa_may_ptrace(tracer, tracerp, to_profile, PTRACE_MODE_ATTACH);
+
+out:
+	if (cred)
+		put_cred(cred);
+
+	return error;
+}
+
+/**
+ * change_profile_perms - find permissions for change_profile
+ * @profile: the current profile  (NOT NULL)
+ * @ns: the namespace being switched to  (NOT NULL)
+ * @name: the name of the profile to change to  (NOT NULL)
+ * @request: requested perms
+ * @start: state to start matching in
+ *
+ * Returns: permission set
+ */
+static struct file_perms change_profile_perms(struct aa_profile *profile,
+					      struct aa_namespace *ns,
+					      const char *name, u32 request,
+					      unsigned int start)
+{
+	struct file_perms perms;
+	struct path_cond cond = { };
+	unsigned int state;
+
+	if (unconfined(profile)) {
+		perms.allow = AA_MAY_CHANGE_PROFILE | AA_MAY_ONEXEC;
+		perms.audit = perms.quiet = perms.kill = 0;
+		return perms;
+	} else if (!profile->file.dfa) {
+		return nullperms;
+	} else if ((ns == profile->ns)) {
+		/* try matching against rules with out namespace prepended */
+		aa_str_perms(profile->file.dfa, start, name, &cond, &perms);
+		if (COMBINED_PERM_MASK(perms) & request)
+			return perms;
+	}
+
+	/* try matching with namespace name and then profile */
+	state = aa_dfa_match(profile->file.dfa, start, ns->base.name);
+	state = aa_dfa_match_len(profile->file.dfa, state, ":", 1);
+	aa_str_perms(profile->file.dfa, state, name, &cond, &perms);
+
+	return perms;
+}
+
+/**
+ * __attach_match_ - find an attachment match
+ * @name - to match against  (NOT NULL)
+ * @head - profile list to walk  (NOT NULL)
+ *
+ * Do a linear search on the profiles in the list.  There is a matching
+ * preference where an exact match is preferred over a name which uses
+ * expressions to match, and matching expressions with the greatest
+ * xmatch_len are preferred.
+ *
+ * Requires: @head not be shared or have appropriate locks held
+ *
+ * Returns: profile or NULL if no match found
+ */
+static struct aa_profile *__attach_match(const char *name,
+					 struct list_head *head)
+{
+	int len = 0;
+	struct aa_profile *profile, *candidate = NULL;
+
+	list_for_each_entry(profile, head, base.list) {
+		if (profile->flags & PFLAG_NULL)
+			continue;
+		if (profile->xmatch && profile->xmatch_len > len) {
+			unsigned int state = aa_dfa_match(profile->xmatch,
+							  DFA_START, name);
+			u32 perm = dfa_user_allow(profile->xmatch, state);
+			/* any accepting state means a valid match. */
+			if (perm & MAY_EXEC) {
+				candidate = profile;
+				len = profile->xmatch_len;
+			}
+		} else if (!strcmp(profile->base.name, name))
+			/* exact non-re match, no more searching required */
+			return profile;
+	}
+
+	return candidate;
+}
+
+/**
+ * find_attach - do attachment search for unconfined processes
+ * @ns: the current namespace  (NOT NULL)
+ * @list: list to search  (NOT NULL)
+ * @name: the executable name to match against  (NOT NULL)
+ *
+ * Returns: profile or NULL if no match found
+ */
+static struct aa_profile *find_attach(struct aa_namespace *ns,
+				      struct list_head *list, const char *name)
+{
+	struct aa_profile *profile;
+
+	read_lock(&ns->lock);
+	profile = aa_get_profile(__attach_match(name, list));
+	read_unlock(&ns->lock);
+
+	return profile;
+}
+
+/**
+ * separate_fqname - separate the namespace and profile names
+ * @fqname: the fqname name to split  (NOT NULL)
+ * @ns_name: the namespace name if it exists  (NOT NULL)
+ *
+ * This is the xtable equivalent routine of aa_split_fqname.  It finds the
+ * split in an xtable fqname which contains an embedded \0 instead of a :
+ * if a namespace is specified.  This is done so the xtable is constant and
+ * isn't re-split on every lookup.
+ *
+ * Either the profile or namespace name may be optional but if the namespace
+ * is specified the profile name termination must be present.  This results
+ * in the following possible encodings:
+ * profile_name\0
+ * :ns_name\0profile_name\0
+ * :ns_name\0\0
+ *
+ * NOTE: the xtable fqname is pre-validated at load time in unpack_trans_table
+ *
+ * Returns: profile name if it is specified else NULL
+ */
+static const char *separate_fqname(const char *fqname, const char **ns_name)
+{
+	const char *name;
+
+	if (fqname[0] == ':') {
+		/* In this case there is guaranteed to be two \0 terminators
+		 * in the string.  They are verified at load time by
+		 * by unpack_trans_table
+		 */
+		*ns_name = fqname + 1;		/* skip : */
+		name = *ns_name + strlen(*ns_name) + 1;
+		if (!*name)
+			name = NULL;
+	} else {
+		*ns_name = NULL;
+		name = fqname;
+	}
+
+	return name;
+}
+
+static const char *next_name(int xtype, const char *name)
+{
+	return NULL;
+}
+
+/**
+ * x_table_lookup - lookup an x transition name via transition table
+ * @profile: current profile (NOT NULL)
+ * @xindex: index into x transition table
+ *
+ * Returns: refcounted profile, or NULL on failure (MAYBE NULL)
+ */
+static struct aa_profile *x_table_lookup(struct aa_profile *profile, u32 xindex)
+{
+	struct aa_profile *new_profile = NULL;
+	struct aa_namespace *ns = profile->ns;
+	u32 xtype = xindex & AA_X_TYPE_MASK;
+	int index = xindex & AA_X_INDEX_MASK;
+	const char *name;
+
+	/* index is guaranteed to be in range, validated at load time */
+	for (name = profile->file.trans.table[index]; !new_profile && name;
+	     name = next_name(xtype, name)) {
+		struct aa_namespace *new_ns;
+		const char *xname = NULL;
+
+		new_ns = NULL;
+		if (xindex & AA_X_CHILD) {
+			/* release by caller */
+			new_profile = aa_find_child(profile, name);
+			continue;
+		} else if (*name == ':') {
+			/* switching namespace */
+			const char *ns_name;
+			xname = name = separate_fqname(name, &ns_name);
+			if (!xname)
+				/* no name so use profile name */
+				xname = profile->base.hname;
+			if (*ns_name == '@') {
+				/* TODO: variable support */
+				;
+			}
+			/* released below */
+			new_ns = aa_find_namespace(ns, ns_name);
+			if (!new_ns)
+				continue;
+		} else if (*name == '@') {
+			/* TODO: variable support */
+			continue;
+		} else {
+			/* basic namespace lookup */
+			xname = name;
+		}
+
+		/* released by caller */
+		new_profile = aa_lookup_profile(new_ns ? new_ns : ns, xname);
+		aa_put_namespace(new_ns);
+	}
+
+	/* released by caller */
+	return new_profile;
+}
+
+/**
+ * x_to_profile - get target profile for a given xindex
+ * @profile: current profile  (NOT NULL)
+ * @name: name to lookup (NOT NULL)
+ * @xindex: index into x transition table
+ *
+ * find profile for a transition index
+ *
+ * Returns: refcounted profile or NULL if not found available
+ */
+static struct aa_profile *x_to_profile(struct aa_profile *profile,
+				       const char *name, u32 xindex)
+{
+	struct aa_profile *new_profile = NULL;
+	struct aa_namespace *ns = profile->ns;
+	u32 xtype = xindex & AA_X_TYPE_MASK;
+
+	switch (xtype) {
+	case AA_X_NONE:
+		/* fail exec unless ix || ux fallback - handled by caller */
+		return NULL;
+	case AA_X_NAME:
+		if (xindex & AA_X_CHILD)
+			/* released by caller */
+			new_profile = find_attach(ns, &profile->base.profiles,
+						  name);
+		else
+			/* released by caller */
+			new_profile = find_attach(ns, &ns->base.profiles,
+						  name);
+		break;
+	case AA_X_TABLE:
+		/* released by caller */
+		new_profile = x_table_lookup(profile, xindex);
+		break;
+	}
+
+	/* released by caller */
+	return new_profile;
+}
+
+/**
+ * apparmor_bprm_set_creds - set the new creds on the bprm struct
+ * @bprm: binprm for the exec  (NOT NULL)
+ *
+ * Returns: %0 or error on failure
+ */
+int apparmor_bprm_set_creds(struct linux_binprm *bprm)
+{
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *new_profile = NULL;
+	struct aa_namespace *ns;
+	char *buffer = NULL;
+	unsigned int state;
+	struct file_perms perms = {};
+	struct path_cond cond = {
+		bprm->file->f_path.dentry->d_inode->i_uid,
+		bprm->file->f_path.dentry->d_inode->i_mode
+	};
+	const char *name = NULL, *target = NULL, *info = NULL;
+	int error = cap_bprm_set_creds(bprm);
+	if (error)
+		return error;
+
+	if (bprm->cred_prepared)
+		return 0;
+
+	cxt = bprm->cred->security;
+	BUG_ON(!cxt);
+
+	profile = aa_get_profile(aa_newest_version(cxt->profile));
+	/*
+	 * get the namespace from the replacement profile as replacement
+	 * can change the namespace
+	 */
+	ns = profile->ns;
+	state = profile->file.start;
+
+	/* buffer freed below, name is pointer into buffer */
+	error = aa_get_name(&bprm->file->f_path, profile->path_flags, &buffer,
+			    &name);
+	if (error) {
+		if (profile->flags &
+		    (PFLAG_IX_ON_NAME_ERROR | PFLAG_UNCONFINED))
+			error = 0;
+		info = "Exec failed name resolution";
+		name = bprm->filename;
+		goto audit;
+	}
+
+	/* Test for onexec first as onexec directives override other
+	 * x transitions.
+	 */
+	if (unconfined(profile)) {
+		/* unconfined task */
+		if (cxt->onexec)
+			/* change_profile on exec already been granted */
+			new_profile = aa_get_profile(cxt->onexec);
+		else
+			new_profile = find_attach(ns, &ns->base.profiles, name);
+		if (!new_profile)
+			goto cleanup;
+		goto apply;
+	}
+
+	/* find exec permissions for name */
+	state = aa_str_perms(profile->file.dfa, state, name, &cond, &perms);
+	if (cxt->onexec) {
+		struct file_perms cp;
+		info = "change_profile onexec";
+		if (!(perms.allow & AA_MAY_ONEXEC))
+			goto audit;
+
+		/* test if this exec can be paired with change_profile onexec.
+		 * onexec permission is linked to exec with a standard pairing
+		 * exec\0change_profile
+		 */
+		state = aa_dfa_null_transition(profile->file.dfa, state);
+		cp = change_profile_perms(profile, cxt->onexec->ns, name,
+					  AA_MAY_ONEXEC, state);
+
+		if (!(cp.allow & AA_MAY_ONEXEC))
+			goto audit;
+		new_profile = aa_get_profile(aa_newest_version(cxt->onexec));
+		goto apply;
+	}
+
+	if (perms.allow & MAY_EXEC) {
+		/* exec permission determine how to transition */
+		new_profile = x_to_profile(profile, name, perms.xindex);
+		if (!new_profile) {
+			if (perms.xindex & AA_X_INHERIT) {
+				/* (p|c|n)ix - don't change profile but do
+				 * use the newest version, which was picked
+				 * up above when getting profile
+				 */
+				info = "ix fallback";
+				new_profile = aa_get_profile(profile);
+				goto x_clear;
+			} else if (perms.xindex & AA_X_UNCONFINED) {
+				new_profile = aa_get_profile(ns->unconfined);
+				info = "ux fallback";
+			} else {
+				error = -ENOENT;
+				info = "profile not found";
+			}
+		}
+	} else if (COMPLAIN_MODE(profile)) {
+		/* no exec permission - are we in learning mode */
+		new_profile = aa_new_null_profile(profile, 0);
+		if (!new_profile) {
+			error = -ENOMEM;
+			info = "could not create null profile";
+		} else {
+			error = -EACCES;
+			target = new_profile->base.hname;
+		}
+		perms.xindex |= AA_X_UNSAFE;
+	} else
+		/* fail exec */
+		error = -EACCES;
+
+	if (!new_profile)
+		goto audit;
+
+	if (bprm->unsafe & LSM_UNSAFE_SHARE) {
+		/* FIXME: currently don't mediate shared state */
+		;
+	}
+
+	if (bprm->unsafe & (LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)) {
+		error = may_change_ptraced_domain(current, new_profile);
+		if (error) {
+			aa_put_profile(new_profile);
+			goto audit;
+		}
+	}
+
+	/* Determine if secure exec is needed.
+	 * Can be at this point for the following reasons:
+	 * 1. unconfined switching to confined
+	 * 2. confined switching to different confinement
+	 * 3. confined switching to unconfined
+	 *
+	 * Cases 2 and 3 are marked as requiring secure exec
+	 * (unless policy specified "unsafe exec")
+	 *
+	 * bprm->unsafe is used to cache the AA_X_UNSAFE permission
+	 * to avoid having to recompute in secureexec
+	 */
+	if (!(perms.xindex & AA_X_UNSAFE)) {
+		AA_DEBUG("scrubbing environment variables for %s profile=%s\n",
+			 name, new_profile->base.hname);
+		bprm->unsafe |= AA_SECURE_X_NEEDED;
+	}
+apply:
+	target = new_profile->base.hname;
+	/* when transitioning profiles clear unsafe personality bits */
+	bprm->per_clear |= PER_CLEAR_ON_SETID;
+
+x_clear:
+	aa_put_profile(cxt->profile);
+	/* transfer new profile reference will be released when cxt is freed */
+	cxt->profile = new_profile;
+
+	/* clear out all temporary/transitional state from the context */
+	aa_put_profile(cxt->previous);
+	aa_put_profile(cxt->onexec);
+	cxt->previous = NULL;
+	cxt->onexec = NULL;
+	cxt->token = 0;
+
+audit:
+	error = aa_audit_file(profile, &perms, GFP_KERNEL, OP_EXEC, MAY_EXEC,
+			      name, target, cond.uid, info, error);
+
+cleanup:
+	aa_put_profile(profile);
+	kfree(buffer);
+
+	return error;
+}
+
+/**
+ * apparmor_bprm_secureexec - determine if secureexec is needed
+ * @bprm: binprm for exec  (NOT NULL)
+ *
+ * Returns: %1 if secureexec is needed else %0
+ */
+int apparmor_bprm_secureexec(struct linux_binprm *bprm)
+{
+	int ret = cap_bprm_secureexec(bprm);
+
+	/* the decision to use secure exec is computed in set_creds
+	 * and stored in bprm->unsafe.
+	 */
+	if (!ret && (bprm->unsafe & AA_SECURE_X_NEEDED))
+		ret = 1;
+
+	return ret;
+}
+
+/**
+ * apparmor_bprm_committing_creds - do task cleanup on committing new creds
+ * @bprm: binprm for the exec  (NOT NULL)
+ */
+void apparmor_bprm_committing_creds(struct linux_binprm *bprm)
+{
+	struct aa_profile *profile = __aa_current_profile();
+	struct aa_task_cxt *new_cxt = bprm->cred->security;
+
+	/* bail out if unconfined or not changing profile */
+	if ((new_cxt->profile == profile) ||
+	    (unconfined(new_cxt->profile)))
+		return;
+
+	current->pdeath_signal = 0;
+
+	/* reset soft limits and set hard limits for the new profile */
+	__aa_transition_rlimits(profile, new_cxt->profile);
+}
+
+/**
+ * apparmor_bprm_commited_cred - do cleanup after new creds committed
+ * @bprm: binprm for the exec  (NOT NULL)
+ */
+void apparmor_bprm_committed_creds(struct linux_binprm *bprm)
+{
+	/* TODO: cleanup signals - ipc mediation */
+	return;
+}
+
+/*
+ * Functions for self directed profile change
+ */
+
+/**
+ * new_compound_name - create an hname with @n2 appended to @n1
+ * @n1: base of hname  (NOT NULL)
+ * @n2: name to append (NOT NULL)
+ *
+ * Returns: new name or NULL on error
+ */
+static char *new_compound_name(const char *n1, const char *n2)
+{
+	char *name = kmalloc(strlen(n1) + strlen(n2) + 3, GFP_KERNEL);
+	if (name)
+		sprintf(name, "%s//%s", n1, n2);
+	return name;
+}
+
+/**
+ * aa_change_hat - change hat to/from subprofile
+ * @hats: vector of hat names to try changing into (MAYBE NULL if @count == 0)
+ * @count: number of hat names in @hats
+ * @token: magic value to validate the hat change
+ * @permtest: true if this is just a permission test
+ *
+ * Change to the first profile specified in @hats that exists, and store
+ * the @hat_magic in the current task context.  If the count == 0 and the
+ * @token matches that stored in the current task context, return to the
+ * top level profile.
+ *
+ * Returns %0 on success, error otherwise.
+ */
+int aa_change_hat(const char *hats[], int count, u64 token, bool permtest)
+{
+	const struct cred *cred;
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *previous_profile, *hat = NULL;
+	char *name = NULL;
+	int i;
+	struct file_perms perms = {};
+	const char *target = NULL, *info = NULL;
+	int error = 0;
+
+	/* released below */
+	cred = get_current_cred();
+	cxt = cred->security;
+	profile = aa_cred_profile(cred);
+	previous_profile = cxt->previous;
+
+	if (unconfined(profile)) {
+		info = "unconfined";
+		error = -EPERM;
+		goto audit;
+	}
+
+	if (count) {
+		/* attempting to change into a new hat or switch to a sibling */
+		struct aa_profile *root;
+		root = PROFILE_IS_HAT(profile) ? profile->parent : profile;
+
+		/* find first matching hat */
+		for (i = 0; i < count && !hat; i++)
+			/* released below */
+			hat = aa_find_child(root, hats[i]);
+		if (!hat) {
+			if (!COMPLAIN_MODE(root) || permtest) {
+				if (list_empty(&root->base.profiles))
+					error = -ECHILD;
+				else
+					error = -ENOENT;
+				goto out;
+			}
+
+			/*
+			 * In complain mode and failed to match any hats.
+			 * Audit the failure is based off of the first hat
+			 * supplied.  This is done due how userspace
+			 * interacts with change_hat.
+			 *
+			 * TODO: Add logging of all failed hats
+			 */
+
+			/* freed below */
+			name = new_compound_name(root->base.hname, hats[0]);
+			target = name;
+			/* released below */
+			hat = aa_new_null_profile(profile, 1);
+			if (!hat) {
+				info = "failed null profile create";
+				error = -ENOMEM;
+				goto audit;
+			}
+		} else {
+			target = hat->base.hname;
+			if (!PROFILE_IS_HAT(hat)) {
+				info = "target not hat";
+				error = -EPERM;
+				goto audit;
+			}
+		}
+
+		error = may_change_ptraced_domain(current, hat);
+		if (error) {
+			info = "ptraced";
+			error = -EPERM;
+			goto audit;
+		}
+
+		if (!permtest) {
+			error = aa_set_current_hat(hat, token);
+			if (error == -EACCES)
+				/* kill task in case of brute force attacks */
+				perms.kill = AA_MAY_CHANGEHAT;
+			else if (name && !error)
+				/* reset error for learning of new hats */
+				error = -ENOENT;
+		}
+	} else if (previous_profile) {
+		/* Return to saved profile.  Kill task if restore fails
+		 * to avoid brute force attacks
+		 */
+		target = previous_profile->base.hname;
+		error = aa_restore_previous_profile(token);
+		perms.kill = AA_MAY_CHANGEHAT;
+	} else
+		/* ignore restores when there is no saved profile */
+		goto out;
+
+audit:
+	if (!permtest)
+		error = aa_audit_file(profile, &perms, GFP_KERNEL,
+				      OP_CHANGE_HAT, AA_MAY_CHANGEHAT, NULL,
+				      target, 0, info, error);
+
+out:
+	aa_put_profile(hat);
+	kfree(name);
+	put_cred(cred);
+
+	return error;
+}
+
+/**
+ * aa_change_profile - perform a one-way profile transition
+ * @ns_name: name of the profile namespace to change to (MAYBE NULL)
+ * @hname: name of profile to change to (MAYBE NULL)
+ * @onexec: whether this transition is to take place immediately or at exec
+ * @permtest: true if this is just a permission test
+ *
+ * Change to new profile @name.  Unlike with hats, there is no way
+ * to change back.  If @name isn't specified the current profile name is
+ * used.
+ * If @onexec then the transition is delayed until
+ * the next exec.
+ *
+ * Returns %0 on success, error otherwise.
+ */
+int aa_change_profile(const char *ns_name, const char *hname, bool onexec,
+		      bool permtest)
+{
+	const struct cred *cred;
+	struct aa_task_cxt *cxt;
+	struct aa_profile *profile, *target = NULL;
+	struct aa_namespace *ns = NULL;
+	struct file_perms perms = {};
+	const char *name = NULL, *info = NULL;
+	int op, error = 0;
+	u32 request;
+
+	if (!hname && !ns_name)
+		return -EINVAL;
+
+	if (onexec) {
+		request = AA_MAY_ONEXEC;
+		op = OP_CHANGE_ONEXEC;
+	} else {
+		request = AA_MAY_CHANGE_PROFILE;
+		op = OP_CHANGE_PROFILE;
+	}
+
+	cred = get_current_cred();
+	cxt = cred->security;
+	profile = aa_cred_profile(cred);
+
+	if (ns_name) {
+		/* released below */
+		ns = aa_find_namespace(profile->ns, ns_name);
+		if (!ns) {
+			/* we don't create new namespace in complain mode */
+			name = ns_name;
+			info = "namespace not found";
+			error = -ENOENT;
+			goto audit;
+		}
+	} else
+		/* released below */
+		ns = aa_get_namespace(profile->ns);
+
+	/* if the name was not specified, use the name of the current profile */
+	if (!hname) {
+		if (unconfined(profile))
+			hname = ns->unconfined->base.hname;
+		else
+			hname = profile->base.hname;
+	}
+
+	perms = change_profile_perms(profile, ns, hname, request,
+				     profile->file.start);
+	if (!(perms.allow & request)) {
+		error = -EACCES;
+		goto audit;
+	}
+
+	/* released below */
+	target = aa_lookup_profile(ns, hname);
+	if (!target) {
+		info = "profile not found";
+		error = -ENOENT;
+		if (permtest || !COMPLAIN_MODE(profile))
+			goto audit;
+		/* released below */
+		target = aa_new_null_profile(profile, 0);
+		if (!target) {
+			info = "failed null profile create";
+			error = -ENOMEM;
+			goto audit;
+		}
+	}
+
+	/* check if tracing task is allowed to trace target domain */
+	error = may_change_ptraced_domain(current, target);
+	if (error) {
+		info = "ptrace prevents transition";
+		goto audit;
+	}
+
+	if (permtest)
+		goto audit;
+
+	if (onexec)
+		error = aa_set_current_onexec(target);
+	else
+		error = aa_replace_current_profile(target);
+
+audit:
+	if (!permtest)
+		error = aa_audit_file(profile, &perms, GFP_KERNEL, op, request,
+				      name, hname, 0, info, error);
+
+	aa_put_namespace(ns);
+	aa_put_profile(target);
+	put_cred(cred);
+
+	return error;
+}
diff --git a/security/apparmor/file.c b/security/apparmor/file.c
new file mode 100644
index 0000000..7312db7
--- /dev/null
+++ b/security/apparmor/file.c
@@ -0,0 +1,457 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor mediation of files
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/file.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+struct file_perms nullperms;
+
+
+/**
+ * audit_file_mask - convert mask to permission string
+ * @buffer: buffer to write string to (NOT NULL)
+ * @mask: permission mask to convert
+ */
+static void audit_file_mask(struct audit_buffer *ab, u32 mask)
+{
+	char str[10];
+
+	char *m = str;
+
+	if (mask & AA_EXEC_MMAP)
+		*m++ = 'm';
+	if (mask & (MAY_READ | AA_MAY_META_READ))
+		*m++ = 'r';
+	if (mask & (MAY_WRITE | AA_MAY_META_WRITE | AA_MAY_CHMOD |
+		    AA_MAY_CHOWN))
+		*m++ = 'w';
+	else if (mask & MAY_APPEND)
+		*m++ = 'a';
+	if (mask & AA_MAY_CREATE)
+		*m++ = 'c';
+	if (mask & AA_MAY_DELETE)
+		*m++ = 'd';
+	if (mask & AA_MAY_LINK)
+		*m++ = 'l';
+	if (mask & AA_MAY_LOCK)
+		*m++ = 'k';
+	if (mask & MAY_EXEC)
+		*m++ = 'x';
+	*m = '\0';
+
+	audit_log_string(ab, str);
+}
+
+/**
+ * file_audit_cb - call back for file specific audit fields
+ * @ab: audit_buffer  (NOT NULL)
+ * @va: audit struct to audit values of  (NOT NULL)
+ */
+static void file_audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	uid_t fsuid = current_fsuid();
+
+	if (sa->aad.fs.request & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " requested_mask=");
+		audit_file_mask(ab, sa->aad.fs.request);
+	}
+	if (sa->aad.fs.denied & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " denied_mask=");
+		audit_file_mask(ab, sa->aad.fs.denied);
+	}
+	if (sa->aad.fs.request & AA_AUDIT_FILE_MASK) {
+		audit_log_format(ab, " fsuid=%d", fsuid);
+		audit_log_format(ab, " ouid=%d", sa->aad.fs.ouid);
+	}
+
+	if (sa->aad.fs.target) {
+		audit_log_format(ab, " target=");
+		audit_log_untrustedstring(ab, sa->aad.fs.target);
+	}
+}
+
+/**
+ * aa_audit_file - handle the auditing of file operations
+ * @profile: the profile being enforced  (NOT NULL)
+ * @perms: the permissions computed for the request (NOT NULL)
+ * @gfp: allocation flags
+ * @op: operation being mediated
+ * @request: permissions requested
+ * @name: name of object being mediated (MAYBE NULL)
+ * @target: name of target (MAYBE NULL)
+ * @ouid: object uid
+ * @info: extra information message (MAYBE NULL)
+ * @error: 0 if operation allowed else failure error code
+ *
+ * Returns: %0 or error on failure
+ */
+int aa_audit_file(struct aa_profile *profile, struct file_perms *perms,
+		  gfp_t gfp, int op, u32 request, const char *name,
+		  const char *target, uid_t ouid, const char *info, int error)
+{
+	int type = AUDIT_APPARMOR_AUTO;
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = op,
+	sa.aad.fs.request = request;
+	sa.aad.name = name;
+	sa.aad.fs.target = target;
+	sa.aad.fs.ouid = ouid;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	if (likely(!sa.aad.error)) {
+		u32 mask = perms->audit;
+
+		if (unlikely(AUDIT_MODE(profile) == AUDIT_ALL))
+			mask = 0xffff;
+
+		/* mask off perms that are not being force audited */
+		sa.aad.fs.request &= mask;
+
+		if (likely(!sa.aad.fs.request))
+			return 0;
+		type = AUDIT_APPARMOR_AUDIT;
+	} else {
+		/* only report permissions that were denied */
+		sa.aad.fs.request = sa.aad.fs.request & ~perms->allow;
+
+		if (sa.aad.fs.request & perms->kill)
+			type = AUDIT_APPARMOR_KILL;
+
+		/* quiet known rejects, assumes quiet and kill do not overlap */
+		if ((sa.aad.fs.request & perms->quiet) &&
+		    AUDIT_MODE(profile) != AUDIT_NOQUIET &&
+		    AUDIT_MODE(profile) != AUDIT_ALL)
+			sa.aad.fs.request &= ~perms->quiet;
+
+		if (!sa.aad.fs.request)
+			return COMPLAIN_MODE(profile) ? 0 : sa.aad.error;
+	}
+
+	sa.aad.fs.denied = sa.aad.fs.request & ~perms->allow;
+	return aa_audit(type, profile, gfp, &sa, file_audit_cb);
+}
+
+/**
+ * map_old_perms - map old file perms layout to the new layout
+ * @old: permission set in old mapping
+ *
+ * Returns: new permission mapping
+ */
+static u32 map_old_perms(u32 old)
+{
+	u32 new = old & 0xf;
+	if (old & MAY_READ)
+		new |= AA_MAY_META_READ;
+	if (old & MAY_WRITE)
+		new |= AA_MAY_META_WRITE | AA_MAY_CREATE | AA_MAY_DELETE |
+			AA_MAY_CHMOD | AA_MAY_CHOWN;
+	if (old & 0x10)
+		new |= AA_MAY_LINK;
+	/* the old mapping lock and link_subset flags where overlaid
+	 * and use was determined by part of a pair that they were in
+	 */
+	if (old & 0x20)
+		new |= AA_MAY_LOCK | AA_LINK_SUBSET;
+	if (old & 0x40)	/* AA_EXEC_MMAP */
+		new |= AA_EXEC_MMAP;
+
+	new |= AA_MAY_META_READ;
+
+	return new;
+}
+
+/**
+ * compute_perms - convert dfa compressed perms to internal perms
+ * @dfa: dfa to compute perms for   (NOT NULL)
+ * @state: state in dfa
+ * @cond:  conditions to consider  (NOT NULL)
+ *
+ * TODO: convert from dfa + state to permission entry, do computation conversion
+ *       at load time.
+ *
+ * Returns: computed permission set
+ */
+static struct file_perms compute_perms(struct aa_dfa *dfa, unsigned int state,
+				       struct path_cond *cond)
+{
+	struct file_perms perms;
+
+	/* FIXME: change over to new dfa format
+	 * currently file perms are encoded in the dfa, new format
+	 * splits the permissions from the dfa.  This mapping can be
+	 * done at profile load
+	 */
+	perms.kill = 0;
+
+	if (current_fsuid() == cond->uid) {
+		perms.allow = map_old_perms(dfa_user_allow(dfa, state));
+		perms.audit = map_old_perms(dfa_user_audit(dfa, state));
+		perms.quiet = map_old_perms(dfa_user_quiet(dfa, state));
+		perms.xindex = dfa_user_xindex(dfa, state);
+	} else {
+		perms.allow = map_old_perms(dfa_other_allow(dfa, state));
+		perms.audit = map_old_perms(dfa_other_audit(dfa, state));
+		perms.quiet = map_old_perms(dfa_other_quiet(dfa, state));
+		perms.xindex = dfa_other_xindex(dfa, state);
+	}
+
+	/* change_profile wasn't determined by ownership in old mapping */
+	if (ACCEPT_TABLE(dfa)[state] & 0x80000000)
+		perms.allow |= AA_MAY_CHANGE_PROFILE;
+
+	return perms;
+}
+
+/**
+ * aa_str_perms - find permission that match @name
+ * @dfa: to match against  (MAYBE NULL)
+ * @state: state to start matching in
+ * @name: string to match against dfa  (NOT NULL)
+ * @cond: conditions to consider for permission set computation  (NOT NULL)
+ * @perms: Returns - the permissions found when matching @name
+ *
+ * Returns: the final state in @dfa when beginning @start and walking @name
+ */
+unsigned int aa_str_perms(struct aa_dfa *dfa, unsigned int start,
+			  const char *name, struct path_cond *cond,
+			  struct file_perms *perms)
+{
+	unsigned int state;
+	if (!dfa) {
+		*perms = nullperms;
+		return DFA_NOMATCH;
+	}
+
+	state = aa_dfa_match(dfa, start, name);
+	*perms = compute_perms(dfa, state, cond);
+
+	return state;
+}
+
+/**
+ * is_deleted - test if a file has been completely unlinked
+ * @dentry: dentry of file to test for deletion  (NOT NULL)
+ *
+ * Returns: %1 if deleted else %0
+ */
+static inline bool is_deleted(struct dentry *dentry)
+{
+	if (d_unlinked(dentry) && dentry->d_inode->i_nlink == 0)
+		return 1;
+	return 0;
+}
+
+/**
+ * aa_path_perm - do permissions check & audit for @path
+ * @op: operation being checked
+ * @profile: profile being enforced  (NOT NULL)
+ * @path: path to check permissions of  (NOT NULL)
+ * @flags: any additional path flags beyond what the profile specifies
+ * @request: requested permissions
+ * @cond: conditional info for this request  (NOT NULL)
+ *
+ * Returns: %0 else error if access denied or other error
+ */
+int aa_path_perm(int op, struct aa_profile *profile, struct path *path,
+		 int flags, u32 request, struct path_cond *cond)
+{
+	char *buffer = NULL;
+	struct file_perms perms = {};
+	const char *name, *info = NULL;
+	int error;
+
+	flags |= profile->path_flags | (S_ISDIR(cond->mode) ? PATH_IS_DIR : 0);
+	error = aa_get_name(path, flags, &buffer, &name);
+	if (error) {
+		if (error == -ENOENT && is_deleted(path->dentry)) {
+			/* Access to open files that are deleted are
+			 * give a pass (implicit delegation)
+			 */
+			error = 0;
+			perms.allow = request;
+		} else if (error == -ENOENT)
+			info = "Failed name lookup - deleted entry";
+		else if (error == -ESTALE)
+			info = "Failed name lookup - disconnected path";
+		else if (error == -ENAMETOOLONG)
+			info = "Failed name lookup - name too long";
+		else
+			info = "Failed name lookup";
+	} else {
+		aa_str_perms(profile->file.dfa, profile->file.start, name, cond,
+			     &perms);
+		if (request & ~perms.allow)
+			error = -EACCES;
+	}
+	error = aa_audit_file(profile, &perms, GFP_KERNEL, op, request, name,
+			      NULL, cond->uid, info, error);
+	kfree(buffer);
+
+	return error;
+}
+
+/**
+ * xindex_is_subset - helper for aa_path_link
+ * @link: link permission set
+ * @target: target permission set
+ *
+ * test target x permissions are equal OR a subset of link x permissions
+ * this is done as part of the subset test, where a hardlink must have
+ * a subset of permissions that the target has.
+ *
+ * Returns: %1 if subset else %0
+ */
+static inline bool xindex_is_subset(u32 link, u32 target)
+{
+	if (((link & ~AA_X_UNSAFE) != (target & ~AA_X_UNSAFE)) ||
+	    ((link & AA_X_UNSAFE) && !(target & AA_X_UNSAFE)))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * aa_path_link - Handle hard link permission check
+ * @profile: the profile being enforced  (NOT NULL)
+ * @old_dentry: the target dentry  (NOT NULL)
+ * @new_dir: directory the new link will be created in  (NOT NULL)
+ * @new_dentry: the link being created  (NOT NULL)
+ *
+ * Handle the permission test for a link & target pair.  Permission
+ * is encoded as a pair where the link permission is determined
+ * first, and if allowed, the target is tested.  The target test
+ * is done from the point of the link match (not start of DFA)
+ * making the target permission dependent on the link permission match.
+ *
+ * The subset test if required forces that permissions granted
+ * on link are a subset of the permission granted to target.
+ *
+ * Returns: %0 if allowed else error
+ */
+int aa_path_link(struct aa_profile *profile, struct dentry *old_dentry,
+		 struct path *new_dir, struct dentry *new_dentry)
+{
+	struct path link = { new_dir->mnt, new_dentry };
+	struct path target = { new_dir->mnt, old_dentry };
+	struct path_cond cond = {
+		old_dentry->d_inode->i_uid,
+		old_dentry->d_inode->i_mode
+	};
+	char *buffer = NULL, *buffer2 = NULL;
+	const char *lname, *tname = NULL, *info = NULL;
+	struct file_perms lperms, perms;
+	u32 request = AA_MAY_LINK;
+	unsigned int state;
+	int error;
+
+	lperms = nullperms;
+
+	/* buffer freed below, lname is pointer in buffer */
+	error = aa_get_name(&link, profile->path_flags, &buffer, &lname);
+	if (error)
+		goto audit;
+
+	/* buffer2 freed below, tname is pointer in buffer2 */
+	error = aa_get_name(&target, profile->path_flags, &buffer2, &tname);
+	if (error)
+		goto audit;
+
+	error = -EACCES;
+	/* aa_str_perms - handles the case of the dfa being NULL */
+	state = aa_str_perms(profile->file.dfa, profile->file.start, lname,
+			     &cond, &lperms);
+
+	if (!(lperms.allow & AA_MAY_LINK))
+		goto audit;
+
+	/* test to see if target can be paired with link */
+	state = aa_dfa_null_transition(profile->file.dfa, state);
+	aa_str_perms(profile->file.dfa, state, tname, &cond, &perms);
+
+	/* force audit/quiet masks for link are stored in the second entry
+	 * in the link pair.
+	 */
+	lperms.audit = perms.audit;
+	lperms.quiet = perms.quiet;
+	lperms.kill = perms.kill;
+
+	if (!(perms.allow & AA_MAY_LINK)) {
+		info = "target restricted";
+		goto audit;
+	}
+
+	/* done if link subset test is not required */
+	if (!(perms.allow & AA_LINK_SUBSET))
+		goto done_tests;
+
+	/* Do link perm subset test requiring allowed permission on link are a
+	 * subset of the allowed permissions on target.
+	 */
+	aa_str_perms(profile->file.dfa, profile->file.start, tname, &cond,
+		     &perms);
+
+	/* AA_MAY_LINK is not considered in the subset test */
+	request = lperms.allow & ~AA_MAY_LINK;
+	lperms.allow &= perms.allow | AA_MAY_LINK;
+
+	request |= AA_AUDIT_FILE_MASK & (lperms.allow & ~perms.allow);
+	if (request & ~lperms.allow) {
+		goto audit;
+	} else if ((lperms.allow & MAY_EXEC) &&
+		   !xindex_is_subset(lperms.xindex, perms.xindex)) {
+		lperms.allow &= ~MAY_EXEC;
+		request |= MAY_EXEC;
+		info = "link not subset of target";
+		goto audit;
+	}
+
+done_tests:
+	error = 0;
+
+audit:
+	error = aa_audit_file(profile, &lperms, GFP_KERNEL, OP_LINK, request,
+			      lname, tname, cond.uid, info, error);
+	kfree(buffer);
+	kfree(buffer2);
+
+	return error;
+}
+
+/**
+ * aa_file_perm - do permission revalidation check & audit for @file
+ * @op: operation being checked
+ * @profile: profile being enforced   (NOT NULL)
+ * @file: file to revalidate access permissions on  (NOT NULL)
+ * @request: requested permissions
+ *
+ * Returns: %0 if access allowed else error
+ */
+int aa_file_perm(int op, struct aa_profile *profile, struct file *file,
+		 u32 request)
+{
+	struct path_cond cond = {
+		.uid = file->f_path.dentry->d_inode->i_uid,
+		.mode = file->f_path.dentry->d_inode->i_mode
+	};
+
+	return aa_path_perm(op, profile, &file->f_path, PATH_DELEGATE_DELETED,
+			    request, &cond);
+}
diff --git a/security/apparmor/include/apparmor.h b/security/apparmor/include/apparmor.h
new file mode 100644
index 0000000..38ccaea
--- /dev/null
+++ b/security/apparmor/include/apparmor.h
@@ -0,0 +1,92 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor basic global and lib definitions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __APPARMOR_H
+#define __APPARMOR_H
+
+#include <linux/fs.h>
+
+#include "match.h"
+
+/* Control parameters settable through module/boot flags */
+extern enum audit_mode aa_g_audit;
+extern int aa_g_audit_header;
+extern int aa_g_debug;
+extern int aa_g_lock_policy;
+extern int aa_g_logsyscall;
+extern int aa_g_paranoid_load;
+extern unsigned int aa_g_path_max;
+
+/*
+ * DEBUG remains global (no per profile flag) since it is mostly used in sysctl
+ * which is not related to profile accesses.
+ */
+
+#define AA_DEBUG(fmt, args...)						\
+	do {								\
+		if (aa_g_debug && printk_ratelimit())			\
+			printk(KERN_DEBUG "AppArmor: " fmt, ##args);	\
+	} while (0)
+
+#define AA_ERROR(fmt, args...)						\
+	do {								\
+		if (printk_ratelimit())					\
+			printk(KERN_ERR "AppArmor: " fmt, ##args);	\
+	} while (0)
+
+/* Flag indicating whether initialization completed */
+extern int apparmor_initialized __initdata;
+
+/* fn's in lib */
+char *aa_split_fqname(char *args, char **ns_name);
+void aa_info_message(const char *str);
+void *kvmalloc(size_t size);
+void kvfree(void *buffer);
+
+
+/**
+ * aa_strneq - compare null terminated @str to a non null terminated substring
+ * @str: a null terminated string
+ * @sub: a substring, not necessarily null terminated
+ * @len: length of @sub to compare
+ *
+ * The @str string must be full consumed for this to be considered a match
+ */
+static inline bool aa_strneq(const char *str, const char *sub, int len)
+{
+	return !strncmp(str, sub, len) && !str[len];
+}
+
+/**
+ * aa_dfa_null_transition - step to next state after null character
+ * @dfa: the dfa to match against
+ * @start: the state of the dfa to start matching in
+ *
+ * aa_dfa_null_transition transitions to the next state after a null
+ * character which is not used in standard matching and is only
+ * used to separate pairs.
+ */
+static inline unsigned int aa_dfa_null_transition(struct aa_dfa *dfa,
+						  unsigned int start)
+{
+	/* the null transition only needs the string's null terminator byte */
+	return aa_dfa_match_len(dfa, start, "", 1);
+}
+
+static inline bool mediated_filesystem(struct inode *inode)
+{
+	return !(inode->i_sb->s_flags & MS_NOUSER);
+}
+
+#endif /* __APPARMOR_H */
diff --git a/security/apparmor/include/apparmorfs.h b/security/apparmor/include/apparmorfs.h
new file mode 100644
index 0000000..cb1e93a
--- /dev/null
+++ b/security/apparmor/include/apparmorfs.h
@@ -0,0 +1,20 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor filesystem definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_APPARMORFS_H
+#define __AA_APPARMORFS_H
+
+extern void __init aa_destroy_aafs(void);
+
+#endif /* __AA_APPARMORFS_H */
diff --git a/security/apparmor/include/audit.h b/security/apparmor/include/audit.h
new file mode 100644
index 0000000..1951786
--- /dev/null
+++ b/security/apparmor/include/audit.h
@@ -0,0 +1,123 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor auditing function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_AUDIT_H
+#define __AA_AUDIT_H
+
+#include <linux/audit.h>
+#include <linux/fs.h>
+#include <linux/lsm_audit.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "file.h"
+
+struct aa_profile;
+
+extern const char *audit_mode_names[];
+#define AUDIT_MAX_INDEX 5
+
+#define AUDIT_APPARMOR_AUTO 0	/* auto choose audit message type */
+
+enum audit_mode {
+	AUDIT_NORMAL,		/* follow normal auditing of accesses */
+	AUDIT_QUIET_DENIED,	/* quiet all denied access messages */
+	AUDIT_QUIET,		/* quiet all messages */
+	AUDIT_NOQUIET,		/* do not quiet audit messages */
+	AUDIT_ALL		/* audit all accesses */
+};
+
+enum audit_type {
+	AUDIT_APPARMOR_AUDIT,
+	AUDIT_APPARMOR_ALLOWED,
+	AUDIT_APPARMOR_DENIED,
+	AUDIT_APPARMOR_HINT,
+	AUDIT_APPARMOR_STATUS,
+	AUDIT_APPARMOR_ERROR,
+	AUDIT_APPARMOR_KILL
+};
+
+extern const char *op_table[];
+enum aa_ops {
+	OP_NULL,
+
+	OP_SYSCTL,
+	OP_CAPABLE,
+
+	OP_UNLINK,
+	OP_MKDIR,
+	OP_RMDIR,
+	OP_MKNOD,
+	OP_TRUNC,
+	OP_LINK,
+	OP_SYMLINK,
+	OP_RENAME_SRC,
+	OP_RENAME_DEST,
+	OP_CHMOD,
+	OP_CHOWN,
+	OP_GETATTR,
+	OP_OPEN,
+
+	OP_FPERM,
+	OP_FLOCK,
+	OP_FMMAP,
+	OP_FMPROT,
+
+	OP_CREATE,
+	OP_POST_CREATE,
+	OP_BIND,
+	OP_CONNECT,
+	OP_LISTEN,
+	OP_ACCEPT,
+	OP_SENDMSG,
+	OP_RECVMSG,
+	OP_GETSOCKNAME,
+	OP_GETPEERNAME,
+	OP_GETSOCKOPT,
+	OP_SETSOCKOPT,
+	OP_SOCK_SHUTDOWN,
+
+	OP_PTRACE,
+
+	OP_EXEC,
+	OP_CHANGE_HAT,
+	OP_CHANGE_PROFILE,
+	OP_CHANGE_ONEXEC,
+
+	OP_SETPROCATTR,
+	OP_SETRLIMIT,
+
+	OP_PROF_REPL,
+	OP_PROF_LOAD,
+	OP_PROF_RM,
+};
+
+
+/* define a short hand for apparmor_audit_data portion of common_audit_data */
+#define aad apparmor_audit_data
+
+void aa_audit_msg(int type, struct common_audit_data *sa,
+		  void (*cb) (struct audit_buffer *, void *));
+int aa_audit(int type, struct aa_profile *profile, gfp_t gfp,
+	     struct common_audit_data *sa,
+	     void (*cb) (struct audit_buffer *, void *));
+
+static inline int complain_error(int error)
+{
+	if (error == -EPERM || error == -EACCES)
+		return 0;
+	return error;
+}
+
+#endif /* __AA_AUDIT_H */
diff --git a/security/apparmor/include/capability.h b/security/apparmor/include/capability.h
new file mode 100644
index 0000000..c24d295
--- /dev/null
+++ b/security/apparmor/include/capability.h
@@ -0,0 +1,45 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor capability mediation definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_CAPABILITY_H
+#define __AA_CAPABILITY_H
+
+#include <linux/sched.h>
+
+struct aa_profile;
+
+/* aa_caps - confinement data for capabilities
+ * @allowed: capabilities mask
+ * @audit: caps that are to be audited
+ * @quiet: caps that should not be audited
+ * @kill: caps that when requested will result in the task being killed
+ * @extended: caps that are subject finer grained mediation
+ */
+struct aa_caps {
+	kernel_cap_t allow;
+	kernel_cap_t audit;
+	kernel_cap_t quiet;
+	kernel_cap_t kill;
+	kernel_cap_t extended;
+};
+
+int aa_capable(struct task_struct *task, struct aa_profile *profile, int cap,
+	       int audit);
+
+static inline void aa_free_cap_rules(struct aa_caps *caps)
+{
+	/* NOP */
+}
+
+#endif /* __AA_CAPBILITY_H */
diff --git a/security/apparmor/include/context.h b/security/apparmor/include/context.h
new file mode 100644
index 0000000..a9cbee4
--- /dev/null
+++ b/security/apparmor/include/context.h
@@ -0,0 +1,154 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor contexts used to associate "labels" to objects.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_CONTEXT_H
+#define __AA_CONTEXT_H
+
+#include <linux/cred.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include "policy.h"
+
+/* struct aa_file_cxt - the AppArmor context the file was opened in
+ * @perms: the permission the file was opened with
+ *
+ * The file_cxt could currently be directly stored in file->f_security
+ * as the profile reference is now stored in the f_cred.  However the
+ * cxt struct will expand in the future so we keep the struct.
+ */
+struct aa_file_cxt {
+	u16 allow;
+};
+
+/**
+ * aa_alloc_file_context - allocate file_cxt
+ * @gfp: gfp flags for allocation
+ *
+ * Returns: file_cxt or NULL on failure
+ */
+static inline struct aa_file_cxt *aa_alloc_file_context(gfp_t gfp)
+{
+	return kzalloc(sizeof(struct aa_file_cxt), gfp);
+}
+
+/**
+ * aa_free_file_context - free a file_cxt
+ * @cxt: file_cxt to free  (MAYBE_NULL)
+ */
+static inline void aa_free_file_context(struct aa_file_cxt *cxt)
+{
+	if (cxt)
+		kzfree(cxt);
+}
+
+/**
+ * struct aa_task_cxt - primary label for confined tasks
+ * @profile: the current profile   (NOT NULL)
+ * @exec: profile to transition to on next exec  (MAYBE NULL)
+ * @previous: profile the task may return to     (MAYBE NULL)
+ * @token: magic value the task must know for returning to @previous_profile
+ *
+ * Contains the task's current profile (which could change due to
+ * change_hat).  Plus the hat_magic needed during change_hat.
+ *
+ * TODO: make so a task can be confined by a stack of contexts
+ */
+struct aa_task_cxt {
+	struct aa_profile *profile;
+	struct aa_profile *onexec;
+	struct aa_profile *previous;
+	u64 token;
+};
+
+struct aa_task_cxt *aa_alloc_task_context(gfp_t flags);
+void aa_free_task_context(struct aa_task_cxt *cxt);
+void aa_dup_task_context(struct aa_task_cxt *new,
+			 const struct aa_task_cxt *old);
+int aa_replace_current_profile(struct aa_profile *profile);
+int aa_set_current_onexec(struct aa_profile *profile);
+int aa_set_current_hat(struct aa_profile *profile, u64 token);
+int aa_restore_previous_profile(u64 cookie);
+
+/**
+ * __aa_task_is_confined - determine if @task has any confinement
+ * @task: task to check confinement of  (NOT NULL)
+ *
+ * If @task != current needs to be called in RCU safe critical section
+ */
+static inline bool __aa_task_is_confined(struct task_struct *task)
+{
+	struct aa_task_cxt *cxt = __task_cred(task)->security;
+
+	BUG_ON(!cxt || !cxt->profile);
+	if (unconfined(aa_newest_version(cxt->profile)))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * aa_cred_profile - obtain cred's profiles
+ * @cred: cred to obtain profiles from  (NOT NULL)
+ *
+ * Returns: confining profile
+ *
+ * does NOT increment reference count
+ */
+static inline struct aa_profile *aa_cred_profile(const struct cred *cred)
+{
+	struct aa_task_cxt *cxt = cred->security;
+	BUG_ON(!cxt || !cxt->profile);
+	return aa_newest_version(cxt->profile);
+}
+
+/**
+ * __aa_current_profile - find the current tasks confining profile
+ *
+ * Returns: up to date confining profile or the ns unconfined profile (NOT NULL)
+ *
+ * This fn will not update the tasks cred to the most up to date version
+ * of the profile so it is safe to call when inside of locks.
+ */
+static inline struct aa_profile *__aa_current_profile(void)
+{
+	return aa_cred_profile(current_cred());
+}
+
+/**
+ * aa_current_profile - find the current tasks confining profile and do updates
+ *
+ * Returns: up to date confining profile or the ns unconfined profile (NOT NULL)
+ *
+ * This fn will update the tasks cred structure if the profile has been
+ * replaced.  Not safe to call inside locks
+ */
+static inline struct aa_profile *aa_current_profile(void)
+{
+	const struct aa_task_cxt *cxt = current_cred()->security;
+	struct aa_profile *profile;
+	BUG_ON(!cxt || !cxt->profile);
+
+	profile = aa_newest_version(cxt->profile);
+	/*
+	 * Whether or not replacement succeeds, use newest profile so
+	 * there is no need to update it after replacement.
+	 */
+	if (unlikely((cxt->profile != profile)))
+		aa_replace_current_profile(profile);
+
+	return profile;
+}
+
+#endif /* __AA_CONTEXT_H */
diff --git a/security/apparmor/include/domain.h b/security/apparmor/include/domain.h
new file mode 100644
index 0000000..de04464
--- /dev/null
+++ b/security/apparmor/include/domain.h
@@ -0,0 +1,36 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security domain transition function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/binfmts.h>
+#include <linux/types.h>
+
+#ifndef __AA_DOMAIN_H
+#define __AA_DOMAIN_H
+
+struct aa_domain {
+	int size;
+	char **table;
+};
+
+int apparmor_bprm_set_creds(struct linux_binprm *bprm);
+int apparmor_bprm_secureexec(struct linux_binprm *bprm);
+void apparmor_bprm_committing_creds(struct linux_binprm *bprm);
+void apparmor_bprm_committed_creds(struct linux_binprm *bprm);
+
+void aa_free_domain_entries(struct aa_domain *domain);
+int aa_change_hat(const char *hats[], int count, u64 token, bool permtest);
+int aa_change_profile(const char *ns_name, const char *name, bool onexec,
+		      bool permtest);
+
+#endif /* __AA_DOMAIN_H */
diff --git a/security/apparmor/include/file.h b/security/apparmor/include/file.h
new file mode 100644
index 0000000..be36fea
--- /dev/null
+++ b/security/apparmor/include/file.h
@@ -0,0 +1,217 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor file mediation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_FILE_H
+#define __AA_FILE_H
+
+#include <linux/path.h>
+
+#include "domain.h"
+#include "match.h"
+
+struct aa_profile;
+
+/*
+ * We use MAY_EXEC, MAY_WRITE, MAY_READ, MAY_APPEND and the following flags
+ * for profile permissions
+ */
+#define AA_MAY_CREATE                  0x0010
+#define AA_MAY_DELETE                  0x0020
+#define AA_MAY_META_WRITE              0x0040
+#define AA_MAY_META_READ               0x0080
+
+#define AA_MAY_CHMOD                   0x0100
+#define AA_MAY_CHOWN                   0x0200
+#define AA_MAY_LOCK                    0x0400
+#define AA_EXEC_MMAP                   0x0800
+
+#define AA_MAY_LINK			0x1000
+#define AA_LINK_SUBSET			AA_MAY_LOCK	/* overlaid */
+#define AA_MAY_ONEXEC			0x40000000	/* exec allows onexec */
+#define AA_MAY_CHANGE_PROFILE		0x80000000
+#define AA_MAY_CHANGEHAT		0x80000000	/* ctrl auditing only */
+
+#define AA_AUDIT_FILE_MASK	(MAY_READ | MAY_WRITE | MAY_EXEC | MAY_APPEND |\
+				 AA_MAY_CREATE | AA_MAY_DELETE |	\
+				 AA_MAY_META_READ | AA_MAY_META_WRITE | \
+				 AA_MAY_CHMOD | AA_MAY_CHOWN | AA_MAY_LOCK | \
+				 AA_EXEC_MMAP | AA_MAY_LINK)
+
+/*
+ * The xindex is broken into 3 parts
+ * - index - an index into either the exec name table or the variable table
+ * - exec type - which determines how the executable name and index are used
+ * - flags - which modify how the destination name is applied
+ */
+#define AA_X_INDEX_MASK		0x03ff
+
+#define AA_X_TYPE_MASK		0x0c00
+#define AA_X_TYPE_SHIFT		10
+#define AA_X_NONE		0x0000
+#define AA_X_NAME		0x0400	/* use executable name px */
+#define AA_X_TABLE		0x0800	/* use a specified name ->n# */
+
+#define AA_X_UNSAFE		0x1000
+#define AA_X_CHILD		0x2000	/* make >AA_X_NONE apply to children */
+#define AA_X_INHERIT		0x4000
+#define AA_X_UNCONFINED		0x8000
+
+/* AA_SECURE_X_NEEDED - is passed in the bprm->unsafe field */
+#define AA_SECURE_X_NEEDED	0x8000
+
+/* need to make conditional which ones are being set */
+struct path_cond {
+	uid_t uid;
+	umode_t mode;
+};
+
+/* struct file_perms - file permission
+ * @allow: mask of permissions that are allowed
+ * @audit: mask of permissions to force an audit message for
+ * @quiet: mask of permissions to quiet audit messages for
+ * @kill: mask of permissions that when matched will kill the task
+ * @xindex: exec transition index if @allow contains MAY_EXEC
+ *
+ * The @audit and @queit mask should be mutually exclusive.
+ */
+struct file_perms {
+	u32 allow;
+	u32 audit;
+	u32 quiet;
+	u32 kill;
+	u16 xindex;
+};
+
+extern struct file_perms nullperms;
+
+#define COMBINED_PERM_MASK(X) ((X).allow | (X).audit | (X).quiet | (X).kill)
+
+/* FIXME: split perms from dfa and match this to description
+ *        also add delegation info.
+ */
+static inline u16 dfa_map_xindex(u16 mask)
+{
+	u16 old_index = (mask >> 10) & 0xf;
+	u16 index = 0;
+
+	if (mask & 0x100)
+		index |= AA_X_UNSAFE;
+	if (mask & 0x200)
+		index |= AA_X_INHERIT;
+	if (mask & 0x80)
+		index |= AA_X_UNCONFINED;
+
+	if (old_index == 1) {
+		index |= AA_X_UNCONFINED;
+	} else if (old_index == 2) {
+		index |= AA_X_NAME;
+	} else if (old_index == 3) {
+		index |= AA_X_NAME | AA_X_CHILD;
+	} else {
+		index |= AA_X_TABLE;
+		index |= old_index - 4;
+	}
+
+	return index;
+}
+
+/*
+ * map old dfa inline permissions to new format
+ */
+#define dfa_user_allow(dfa, state) (((ACCEPT_TABLE(dfa)[state]) & 0x7f) | \
+				    ((ACCEPT_TABLE(dfa)[state]) & 0x80000000))
+#define dfa_user_audit(dfa, state) ((ACCEPT_TABLE2(dfa)[state]) & 0x7f)
+#define dfa_user_quiet(dfa, state) (((ACCEPT_TABLE2(dfa)[state]) >> 7) & 0x7f)
+#define dfa_user_xindex(dfa, state) \
+	(dfa_map_xindex(ACCEPT_TABLE(dfa)[state] & 0x3fff))
+
+#define dfa_other_allow(dfa, state) ((((ACCEPT_TABLE(dfa)[state]) >> 14) & \
+				      0x7f) |				\
+				     ((ACCEPT_TABLE(dfa)[state]) & 0x80000000))
+#define dfa_other_audit(dfa, state) (((ACCEPT_TABLE2(dfa)[state]) >> 14) & 0x7f)
+#define dfa_other_quiet(dfa, state) \
+	((((ACCEPT_TABLE2(dfa)[state]) >> 7) >> 14) & 0x7f)
+#define dfa_other_xindex(dfa, state) \
+	dfa_map_xindex((ACCEPT_TABLE(dfa)[state] >> 14) & 0x3fff)
+
+int aa_audit_file(struct aa_profile *profile, struct file_perms *perms,
+		  gfp_t gfp, int op, u32 request, const char *name,
+		  const char *target, uid_t ouid, const char *info, int error);
+
+/**
+ * struct aa_file_rules - components used for file rule permissions
+ * @dfa: dfa to match path names and conditionals against
+ * @perms: permission table indexed by the matched state accept entry of @dfa
+ * @trans: transition table for indexed by named x transitions
+ *
+ * File permission are determined by matching a path against @dfa and then
+ * then using the value of the accept entry for the matching state as
+ * an index into @perms.  If a named exec transition is required it is
+ * looked up in the transition table.
+ */
+struct aa_file_rules {
+	unsigned int start;
+	struct aa_dfa *dfa;
+	/* struct perms perms; */
+	struct aa_domain trans;
+	/* TODO: add delegate table */
+};
+
+unsigned int aa_str_perms(struct aa_dfa *dfa, unsigned int start,
+			  const char *name, struct path_cond *cond,
+			  struct file_perms *perms);
+
+int aa_path_perm(int op, struct aa_profile *profile, struct path *path,
+		 int flags, u32 request, struct path_cond *cond);
+
+int aa_path_link(struct aa_profile *profile, struct dentry *old_dentry,
+		 struct path *new_dir, struct dentry *new_dentry);
+
+int aa_file_perm(int op, struct aa_profile *profile, struct file *file,
+		 u32 request);
+
+static inline void aa_free_file_rules(struct aa_file_rules *rules)
+{
+	aa_put_dfa(rules->dfa);
+	aa_free_domain_entries(&rules->trans);
+}
+
+#define ACC_FMODE(x) (("\000\004\002\006"[(x)&O_ACCMODE]) | (((x) << 1) & 0x40))
+
+/* from namei.c */
+#define MAP_OPEN_FLAGS(x) ((((x) + 1) & O_ACCMODE) ? (x) + 1 : (x))
+
+/**
+ * aa_map_file_perms - map file flags to AppArmor permissions
+ * @file: open file to map flags to AppArmor permissions
+ *
+ * Returns: apparmor permission set for the file
+ */
+static inline u32 aa_map_file_to_perms(struct file *file)
+{
+	int flags = MAP_OPEN_FLAGS(file->f_flags);
+	u32 perms = ACC_FMODE(file->f_mode);
+
+	if ((flags & O_APPEND) && (perms & MAY_WRITE))
+		perms = (perms & ~MAY_WRITE) | MAY_APPEND;
+	/* trunc implies write permission */
+	if (flags & O_TRUNC)
+		perms |= MAY_WRITE;
+	if (flags & O_CREAT)
+		perms |= AA_MAY_CREATE;
+
+	return perms;
+}
+
+#endif /* __AA_FILE_H */
diff --git a/security/apparmor/include/ipc.h b/security/apparmor/include/ipc.h
new file mode 100644
index 0000000..aeda0fbc
--- /dev/null
+++ b/security/apparmor/include/ipc.h
@@ -0,0 +1,28 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor ipc mediation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_IPC_H
+#define __AA_IPC_H
+
+#include <linux/sched.h>
+
+struct aa_profile;
+
+int aa_may_ptrace(struct task_struct *tracer_task, struct aa_profile *tracer,
+		  struct aa_profile *tracee, unsigned int mode);
+
+int aa_ptrace(struct task_struct *tracer, struct task_struct *tracee,
+	      unsigned int mode);
+
+#endif /* __AA_IPC_H */
diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h
new file mode 100644
index 0000000..734a6d3
--- /dev/null
+++ b/security/apparmor/include/match.h
@@ -0,0 +1,132 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy dfa matching engine definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_MATCH_H
+#define __AA_MATCH_H
+
+#include <linux/workqueue.h>
+
+#define DFA_NOMATCH			0
+#define DFA_START			1
+
+#define DFA_VALID_PERM_MASK		0xffffffff
+#define DFA_VALID_PERM2_MASK		0xffffffff
+
+/**
+ * The format used for transition tables is based on the GNU flex table
+ * file format (--tables-file option; see Table File Format in the flex
+ * info pages and the flex sources for documentation). The magic number
+ * used in the header is 0x1B5E783D insted of 0xF13C57B1 though, because
+ * the YY_ID_CHK (check) and YY_ID_DEF (default) tables are used
+ * slightly differently (see the apparmor-parser package).
+ */
+
+#define YYTH_MAGIC	0x1B5E783D
+#define YYTH_DEF_RECURSE 0x1			/* DEF Table is recursive */
+
+struct table_set_header {
+	u32 th_magic;		/* YYTH_MAGIC */
+	u32 th_hsize;
+	u32 th_ssize;
+	u16 th_flags;
+	char th_version[];
+};
+
+/* The YYTD_ID are one less than flex table mappings.  The flex id
+ * has 1 subtracted at table load time, this allows us to directly use the
+ * ID's as indexes.
+ */
+#define	YYTD_ID_ACCEPT	0
+#define YYTD_ID_BASE	1
+#define YYTD_ID_CHK	2
+#define YYTD_ID_DEF	3
+#define YYTD_ID_EC	4
+#define YYTD_ID_META	5
+#define YYTD_ID_ACCEPT2 6
+#define YYTD_ID_NXT	7
+#define YYTD_ID_TSIZE	8
+
+#define YYTD_DATA8	1
+#define YYTD_DATA16	2
+#define YYTD_DATA32	4
+#define YYTD_DATA64	8
+
+/* Each ACCEPT2 table gets 6 dedicated flags, YYTD_DATAX define the
+ * first flags
+ */
+#define ACCEPT1_FLAGS(X) ((X) & 0x3f)
+#define ACCEPT2_FLAGS(X) ACCEPT1_FLAGS((X) >> YYTD_ID_ACCEPT2)
+#define TO_ACCEPT1_FLAG(X) ACCEPT1_FLAGS(X)
+#define TO_ACCEPT2_FLAG(X) (ACCEPT1_FLAGS(X) << YYTD_ID_ACCEPT2)
+#define DFA_FLAG_VERIFY_STATES 0x1000
+
+struct table_header {
+	u16 td_id;
+	u16 td_flags;
+	u32 td_hilen;
+	u32 td_lolen;
+	char td_data[];
+};
+
+#define DEFAULT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_DEF]->td_data))
+#define BASE_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_BASE]->td_data))
+#define NEXT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_NXT]->td_data))
+#define CHECK_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_CHK]->td_data))
+#define EQUIV_TABLE(DFA) ((u8 *)((DFA)->tables[YYTD_ID_EC]->td_data))
+#define ACCEPT_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT]->td_data))
+#define ACCEPT_TABLE2(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT2]->td_data))
+
+struct aa_dfa {
+	struct kref count;
+	u16 flags;
+	struct table_header *tables[YYTD_ID_TSIZE];
+};
+
+#define byte_to_byte(X) (X)
+
+#define UNPACK_ARRAY(TABLE, BLOB, LEN, TYPE, NTOHX) \
+	do { \
+		typeof(LEN) __i; \
+		TYPE *__t = (TYPE *) TABLE; \
+		TYPE *__b = (TYPE *) BLOB; \
+		for (__i = 0; __i < LEN; __i++) { \
+			__t[__i] = NTOHX(__b[__i]); \
+		} \
+	} while (0)
+
+static inline size_t table_size(size_t len, size_t el_size)
+{
+	return ALIGN(sizeof(struct table_header) + len * el_size, 8);
+}
+
+struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags);
+unsigned int aa_dfa_match_len(struct aa_dfa *dfa, unsigned int start,
+			      const char *str, int len);
+unsigned int aa_dfa_match(struct aa_dfa *dfa, unsigned int start,
+			  const char *str);
+void aa_dfa_free_kref(struct kref *kref);
+
+/**
+ * aa_put_dfa - put a dfa refcount
+ * @dfa: dfa to put refcount   (MAYBE NULL)
+ *
+ * Requires: if @dfa != NULL that a valid refcount be held
+ */
+static inline void aa_put_dfa(struct aa_dfa *dfa)
+{
+	if (dfa)
+		kref_put(&dfa->count, aa_dfa_free_kref);
+}
+
+#endif /* __AA_MATCH_H */
diff --git a/security/apparmor/include/path.h b/security/apparmor/include/path.h
new file mode 100644
index 0000000..27b327a
--- /dev/null
+++ b/security/apparmor/include/path.h
@@ -0,0 +1,31 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor basic path manipulation function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_PATH_H
+#define __AA_PATH_H
+
+
+enum path_flags {
+	PATH_IS_DIR = 0x1,		/* path is a directory */
+	PATH_CONNECT_PATH = 0x4,	/* connect disconnected paths to / */
+	PATH_CHROOT_REL = 0x8,		/* do path lookup relative to chroot */
+	PATH_CHROOT_NSCONNECT = 0x10,	/* connect paths that are at ns root */
+
+	PATH_DELEGATE_DELETED = 0x08000, /* delegate deleted files */
+	PATH_MEDIATE_DELETED = 0x10000,	/* mediate deleted paths */
+};
+
+int aa_get_name(struct path *path, int flags, char **buffer, const char **name);
+
+#endif /* __AA_PATH_H */
diff --git a/security/apparmor/include/policy.h b/security/apparmor/include/policy.h
new file mode 100644
index 0000000..aeda5cf
--- /dev/null
+++ b/security/apparmor/include/policy.h
@@ -0,0 +1,305 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_POLICY_H
+#define __AA_POLICY_H
+
+#include <linux/capability.h>
+#include <linux/cred.h>
+#include <linux/kref.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/socket.h>
+
+#include "apparmor.h"
+#include "audit.h"
+#include "capability.h"
+#include "domain.h"
+#include "file.h"
+#include "resource.h"
+
+extern const char *profile_mode_names[];
+#define APPARMOR_NAMES_MAX_INDEX 3
+
+#define COMPLAIN_MODE(_profile)	\
+	((aa_g_profile_mode == APPARMOR_COMPLAIN) || \
+	 ((_profile)->mode == APPARMOR_COMPLAIN))
+
+#define KILL_MODE(_profile) \
+	((aa_g_profile_mode == APPARMOR_KILL) || \
+	 ((_profile)->mode == APPARMOR_KILL))
+
+#define PROFILE_IS_HAT(_profile) ((_profile)->flags & PFLAG_HAT)
+
+/*
+ * FIXME: currently need a clean way to replace and remove profiles as a
+ * set.  It should be done at the namespace level.
+ * Either, with a set of profiles loaded at the namespace level or via
+ * a mark and remove marked interface.
+ */
+enum profile_mode {
+	APPARMOR_ENFORCE,	/* enforce access rules */
+	APPARMOR_COMPLAIN,	/* allow and log access violations */
+	APPARMOR_KILL,		/* kill task on access violation */
+};
+
+enum profile_flags {
+	PFLAG_HAT = 1,			/* profile is a hat */
+	PFLAG_UNCONFINED = 2,		/* profile is an unconfined profile */
+	PFLAG_NULL = 4,			/* profile is null learning profile */
+	PFLAG_IX_ON_NAME_ERROR = 8,	/* fallback to ix on name lookup fail */
+	PFLAG_IMMUTABLE = 0x10,		/* don't allow changes/replacement */
+	PFLAG_USER_DEFINED = 0x20,	/* user based profile - lower privs */
+	PFLAG_NO_LIST_REF = 0x40,	/* list doesn't keep profile ref */
+	PFLAG_OLD_NULL_TRANS = 0x100,	/* use // as the null transition */
+
+	/* These flags must correspond with PATH_flags */
+	PFLAG_MEDIATE_DELETED = 0x10000, /* mediate instead delegate deleted */
+};
+
+struct aa_profile;
+
+/* struct aa_policy - common part of both namespaces and profiles
+ * @name: name of the object
+ * @hname - The hierarchical name
+ * @count: reference count of the obj
+ * @list: list policy object is on
+ * @profiles: head of the profiles list contained in the object
+ */
+struct aa_policy {
+	char *name;
+	char *hname;
+	struct kref count;
+	struct list_head list;
+	struct list_head profiles;
+};
+
+/* struct aa_ns_acct - accounting of profiles in namespace
+ * @max_size: maximum space allowed for all profiles in namespace
+ * @max_count: maximum number of profiles that can be in this namespace
+ * @size: current size of profiles
+ * @count: current count of profiles (includes null profiles)
+ */
+struct aa_ns_acct {
+	int max_size;
+	int max_count;
+	int size;
+	int count;
+};
+
+/* struct aa_namespace - namespace for a set of profiles
+ * @base: common policy
+ * @parent: parent of namespace
+ * @lock: lock for modifying the object
+ * @acct: accounting for the namespace
+ * @unconfined: special unconfined profile for the namespace
+ * @sub_ns: list of namespaces under the current namespace.
+ *
+ * An aa_namespace defines the set profiles that are searched to determine
+ * which profile to attach to a task.  Profiles can not be shared between
+ * aa_namespaces and profile names within a namespace are guaranteed to be
+ * unique.  When profiles in separate namespaces have the same name they
+ * are NOT considered to be equivalent.
+ *
+ * Namespaces are hierarchical and only namespaces and profiles below the
+ * current namespace are visible.
+ *
+ * Namespace names must be unique and can not contain the characters :/\0
+ *
+ * FIXME TODO: add vserver support of namespaces (can it all be done in
+ *             userspace?)
+ */
+struct aa_namespace {
+	struct aa_policy base;
+	struct aa_namespace *parent;
+	rwlock_t lock;
+	struct aa_ns_acct acct;
+	struct aa_profile *unconfined;
+	struct list_head sub_ns;
+};
+
+/* struct aa_profile - basic confinement data
+ * @base - base components of the profile (name, refcount, lists, lock ...)
+ * @parent: parent of profile
+ * @ns: namespace the profile is in
+ * @replacedby: is set to the profile that replaced this profile
+ * @rename: optional profile name that this profile renamed
+ * @xmatch: optional extended matching for unconfined executables names
+ * @xmatch_len: xmatch prefix len, used to determine xmatch priority
+ * @sid: the unique security id number of this profile
+ * @audit: the auditing mode of the profile
+ * @mode: the enforcement mode of the profile
+ * @flags: flags controlling profile behavior
+ * @path_flags: flags controlling path generation behavior
+ * @size: the memory consumed by this profiles rules
+ * @file: The set of rules governing basic file access and domain transitions
+ * @caps: capabilities for the profile
+ * @rlimits: rlimits for the profile
+ *
+ * The AppArmor profile contains the basic confinement data.  Each profile
+ * has a name, and exists in a namespace.  The @name and @exec_match are
+ * used to determine profile attachment against unconfined tasks.  All other
+ * attachments are determined by profile X transition rules.
+ *
+ * The @replacedby field is write protected by the profile lock.  Reads
+ * are assumed to be atomic, and are done without locking.
+ *
+ * Profiles have a hierarchy where hats and children profiles keep
+ * a reference to their parent.
+ *
+ * Profile names can not begin with a : and can not contain the \0
+ * character.  If a profile name begins with / it will be considered when
+ * determining profile attachment on "unconfined" tasks.
+ */
+struct aa_profile {
+	struct aa_policy base;
+	struct aa_profile *parent;
+
+	struct aa_namespace *ns;
+	struct aa_profile *replacedby;
+	const char *rename;
+
+	struct aa_dfa *xmatch;
+	int xmatch_len;
+	u32 sid;
+	enum audit_mode audit;
+	enum profile_mode mode;
+	u32 flags;
+	u32 path_flags;
+	int size;
+
+	struct aa_file_rules file;
+	struct aa_caps caps;
+	struct aa_rlimit rlimits;
+};
+
+extern struct aa_namespace *root_ns;
+extern enum profile_mode aa_g_profile_mode;
+
+void aa_add_profile(struct aa_policy *common, struct aa_profile *profile);
+
+bool aa_ns_visible(struct aa_namespace *curr, struct aa_namespace *view);
+const char *aa_ns_name(struct aa_namespace *parent, struct aa_namespace *child);
+int aa_alloc_root_ns(void);
+void aa_free_root_ns(void);
+void aa_free_namespace_kref(struct kref *kref);
+
+struct aa_namespace *aa_find_namespace(struct aa_namespace *root,
+				       const char *name);
+
+static inline struct aa_policy *aa_get_common(struct aa_policy *c)
+{
+	if (c)
+		kref_get(&c->count);
+
+	return c;
+}
+
+/**
+ * aa_get_namespace - increment references count on @ns
+ * @ns: namespace to increment reference count of (MAYBE NULL)
+ *
+ * Returns: pointer to @ns, if @ns is NULL returns NULL
+ * Requires: @ns must be held with valid refcount when called
+ */
+static inline struct aa_namespace *aa_get_namespace(struct aa_namespace *ns)
+{
+	if (ns)
+		kref_get(&(ns->base.count));
+
+	return ns;
+}
+
+/**
+ * aa_put_namespace - decrement refcount on @ns
+ * @ns: namespace to put reference of
+ *
+ * Decrement reference count of @ns and if no longer in use free it
+ */
+static inline void aa_put_namespace(struct aa_namespace *ns)
+{
+	if (ns)
+		kref_put(&ns->base.count, aa_free_namespace_kref);
+}
+
+struct aa_profile *aa_alloc_profile(const char *name);
+struct aa_profile *aa_new_null_profile(struct aa_profile *parent, int hat);
+void aa_free_profile_kref(struct kref *kref);
+struct aa_profile *aa_find_child(struct aa_profile *parent, const char *name);
+struct aa_profile *aa_lookup_profile(struct aa_namespace *ns, const char *name);
+struct aa_profile *aa_match_profile(struct aa_namespace *ns, const char *name);
+
+ssize_t aa_replace_profiles(void *udata, size_t size, bool noreplace);
+ssize_t aa_remove_profiles(char *name, size_t size);
+
+#define PROF_ADD 1
+#define PROF_REPLACE 0
+
+#define unconfined(X) ((X)->flags & PFLAG_UNCONFINED)
+
+/**
+ * aa_newest_version - find the newest version of @profile
+ * @profile: the profile to check for newer versions of (NOT NULL)
+ *
+ * Returns: newest version of @profile, if @profile is the newest version
+ *          return @profile.
+ *
+ * NOTE: the profile returned is not refcounted, The refcount on @profile
+ * must be held until the caller decides what to do with the returned newest
+ * version.
+ */
+static inline struct aa_profile *aa_newest_version(struct aa_profile *profile)
+{
+	while (profile->replacedby)
+		profile = profile->replacedby;
+
+	return profile;
+}
+
+/**
+ * aa_get_profile - increment refcount on profile @p
+ * @p: profile  (MAYBE NULL)
+ *
+ * Returns: pointer to @p if @p is NULL will return NULL
+ * Requires: @p must be held with valid refcount when called
+ */
+static inline struct aa_profile *aa_get_profile(struct aa_profile *p)
+{
+	if (p)
+		kref_get(&(p->base.count));
+
+	return p;
+}
+
+/**
+ * aa_put_profile - decrement refcount on profile @p
+ * @p: profile  (MAYBE NULL)
+ */
+static inline void aa_put_profile(struct aa_profile *p)
+{
+	if (p)
+		kref_put(&p->base.count, aa_free_profile_kref);
+}
+
+static inline int AUDIT_MODE(struct aa_profile *profile)
+{
+	if (aa_g_audit != AUDIT_NORMAL)
+		return aa_g_audit;
+
+	return profile->audit;
+}
+
+bool aa_may_manage_policy(int op);
+
+#endif /* __AA_POLICY_H */
diff --git a/security/apparmor/include/policy_unpack.h b/security/apparmor/include/policy_unpack.h
new file mode 100644
index 0000000..a2dccca
--- /dev/null
+++ b/security/apparmor/include/policy_unpack.h
@@ -0,0 +1,20 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy loading interface function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __POLICY_INTERFACE_H
+#define __POLICY_INTERFACE_H
+
+struct aa_profile *aa_unpack(void *udata, size_t size, const char **ns);
+
+#endif /* __POLICY_INTERFACE_H */
diff --git a/security/apparmor/include/procattr.h b/security/apparmor/include/procattr.h
new file mode 100644
index 0000000..544aa6b
--- /dev/null
+++ b/security/apparmor/include/procattr.h
@@ -0,0 +1,26 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /proc/<pid>/attr/ interface function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_PROCATTR_H
+#define __AA_PROCATTR_H
+
+#define AA_DO_TEST 1
+#define AA_ONEXEC  1
+
+int aa_getprocattr(struct aa_profile *profile, char **string);
+int aa_setprocattr_changehat(char *args, size_t size, int test);
+int aa_setprocattr_changeprofile(char *fqname, bool onexec, int test);
+int aa_setprocattr_permipc(char *fqname);
+
+#endif /* __AA_PROCATTR_H */
diff --git a/security/apparmor/include/resource.h b/security/apparmor/include/resource.h
new file mode 100644
index 0000000..3c88be9
--- /dev/null
+++ b/security/apparmor/include/resource.h
@@ -0,0 +1,46 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor resource limits function definitions.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_RESOURCE_H
+#define __AA_RESOURCE_H
+
+#include <linux/resource.h>
+#include <linux/sched.h>
+
+struct aa_profile;
+
+/* struct aa_rlimit - rlimit settings for the profile
+ * @mask: which hard limits to set
+ * @limits: rlimit values that override task limits
+ *
+ * AppArmor rlimits are used to set confined task rlimits.  Only the
+ * limits specified in @mask will be controlled by apparmor.
+ */
+struct aa_rlimit {
+	unsigned int mask;
+	struct rlimit limits[RLIM_NLIMITS];
+};
+
+int aa_map_resource(int resource);
+int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
+		      struct rlimit *new_rlim);
+
+void __aa_transition_rlimits(struct aa_profile *old, struct aa_profile *new);
+
+static inline void aa_free_rlimit_rules(struct aa_rlimit *rlims)
+{
+	/* NOP */
+}
+
+#endif /* __AA_RESOURCE_H */
diff --git a/security/apparmor/include/sid.h b/security/apparmor/include/sid.h
new file mode 100644
index 0000000..020db35
--- /dev/null
+++ b/security/apparmor/include/sid.h
@@ -0,0 +1,24 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security identifier (sid) definitions
+ *
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#ifndef __AA_SID_H
+#define __AA_SID_H
+
+#include <linux/types.h>
+
+struct aa_profile;
+
+u32 aa_alloc_sid(void);
+void aa_free_sid(u32 sid);
+
+#endif /* __AA_SID_H */
diff --git a/security/apparmor/ipc.c b/security/apparmor/ipc.c
new file mode 100644
index 0000000..649fad8
--- /dev/null
+++ b/security/apparmor/ipc.c
@@ -0,0 +1,114 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor ipc mediation
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/gfp.h>
+#include <linux/ptrace.h>
+
+#include "include/audit.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/policy.h"
+
+/* call back to audit ptrace fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	audit_log_format(ab, " target=");
+	audit_log_untrustedstring(ab, sa->aad.target);
+}
+
+/**
+ * aa_audit_ptrace - do auditing for ptrace
+ * @profile: profile being enforced  (NOT NULL)
+ * @target: profile being traced (NOT NULL)
+ * @error: error condition
+ *
+ * Returns: %0 or error code
+ */
+static int aa_audit_ptrace(struct aa_profile *profile,
+			   struct aa_profile *target, int error)
+{
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = OP_PTRACE;
+	sa.aad.target = target;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_AUTO, profile, GFP_ATOMIC, &sa,
+			audit_cb);
+}
+
+/**
+ * aa_may_ptrace - test if tracer task can trace the tracee
+ * @tracer_task: task who will do the tracing  (NOT NULL)
+ * @tracer: profile of the task doing the tracing  (NOT NULL)
+ * @tracee: task to be traced
+ * @mode: whether PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+ *
+ * Returns: %0 else error code if permission denied or error
+ */
+int aa_may_ptrace(struct task_struct *tracer_task, struct aa_profile *tracer,
+		  struct aa_profile *tracee, unsigned int mode)
+{
+	/* TODO: currently only based on capability, not extended ptrace
+	 *       rules,
+	 *       Test mode for PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+	 */
+
+	if (unconfined(tracer) || tracer == tracee)
+		return 0;
+	/* log this capability request */
+	return aa_capable(tracer_task, tracer, CAP_SYS_PTRACE, 1);
+}
+
+/**
+ * aa_ptrace - do ptrace permission check and auditing
+ * @tracer: task doing the tracing (NOT NULL)
+ * @tracee: task being traced (NOT NULL)
+ * @mode: ptrace mode either PTRACE_MODE_READ || PTRACE_MODE_ATTACH
+ *
+ * Returns: %0 else error code if permission denied or error
+ */
+int aa_ptrace(struct task_struct *tracer, struct task_struct *tracee,
+	      unsigned int mode)
+{
+	/*
+	 * tracer can ptrace tracee when
+	 * - tracer is unconfined ||
+	 *   - tracer is in complain mode
+	 *   - tracer has rules allowing it to trace tracee currently this is:
+	 *       - confined by the same profile ||
+	 *       - tracer profile has CAP_SYS_PTRACE
+	 */
+
+	struct aa_profile *tracer_p;
+	/* cred released below */
+	const struct cred *cred = get_task_cred(tracer);
+	int error = 0;
+	tracer_p = aa_cred_profile(cred);
+
+	if (!unconfined(tracer_p)) {
+		/* lcred released below */
+		const struct cred *lcred = get_task_cred(tracee);
+		struct aa_profile *tracee_p = aa_cred_profile(lcred);
+
+		error = aa_may_ptrace(tracer, tracer_p, tracee_p, mode);
+		error = aa_audit_ptrace(tracer_p, tracee_p, error);
+
+		put_cred(lcred);
+	}
+	put_cred(cred);
+
+	return error;
+}
diff --git a/security/apparmor/lib.c b/security/apparmor/lib.c
new file mode 100644
index 0000000..6e85cdb
--- /dev/null
+++ b/security/apparmor/lib.c
@@ -0,0 +1,133 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains basic common functions used in AppArmor
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+
+#include "include/audit.h"
+
+
+/**
+ * aa_split_fqname - split a fqname into a profile and namespace name
+ * @fqname: a full qualified name in namespace profile format (NOT NULL)
+ * @ns_name: pointer to portion of the string containing the ns name (NOT NULL)
+ *
+ * Returns: profile name or NULL if one is not specified
+ *
+ * Split a namespace name from a profile name (see policy.c for naming
+ * description).  If a portion of the name is missing it returns NULL for
+ * that portion.
+ *
+ * NOTE: may modify the @fqname string.  The pointers returned point
+ *       into the @fqname string.
+ */
+char *aa_split_fqname(char *fqname, char **ns_name)
+{
+	char *name = strim(fqname);
+
+	*ns_name = NULL;
+	if (name[0] == ':') {
+		char *split = strchr(&name[1], ':');
+		if (split) {
+			/* overwrite ':' with \0 */
+			*split = 0;
+			name = skip_spaces(split + 1);
+		} else
+			/* a ns name without a following profile is allowed */
+			name = NULL;
+		*ns_name = &name[1];
+	}
+	if (name && *name == 0)
+		name = NULL;
+
+	return name;
+}
+
+/**
+ * aa_info_message - log a none profile related status message
+ * @str: message to log
+ */
+void aa_info_message(const char *str)
+{
+	if (audit_enabled) {
+		struct common_audit_data sa;
+		COMMON_AUDIT_DATA_INIT(&sa, NONE);
+		sa.aad.info = str;
+		aa_audit_msg(AUDIT_APPARMOR_STATUS, &sa, NULL);
+	}
+	printk(KERN_INFO "AppArmor: %s\n", str);
+}
+
+/**
+ * kvmalloc - do allocation preferring kmalloc but falling back to vmalloc
+ * @size: size of allocation
+ *
+ * Return: allocated buffer or NULL if failed
+ *
+ * It is possible that policy being loaded from the user is larger than
+ * what can be allocated by kmalloc, in those cases fall back to vmalloc.
+ */
+void *kvmalloc(size_t size)
+{
+	void *buffer = NULL;
+
+	if (size == 0)
+		return NULL;
+
+	/* do not attempt kmalloc if we need more than 16 pages at once */
+	if (size <= (16*PAGE_SIZE))
+		buffer = kmalloc(size, GFP_NOIO | __GFP_NOWARN);
+	if (!buffer) {
+		/* see kvfree for why size must be at least work_struct size
+		 * when allocated via vmalloc
+		 */
+		if (size < sizeof(struct work_struct))
+			size = sizeof(struct work_struct);
+		buffer = vmalloc(size);
+	}
+	return buffer;
+}
+
+/**
+ * do_vfree - workqueue routine for freeing vmalloced memory
+ * @work: data to be freed
+ *
+ * The work_struct is overlaid to the data being freed, as at the point
+ * the work is scheduled the data is no longer valid, be its freeing
+ * needs to be delayed until safe.
+ */
+static void do_vfree(struct work_struct *work)
+{
+	vfree(work);
+}
+
+/**
+ * kvfree - free an allocation do by kvmalloc
+ * @buffer: buffer to free (MAYBE_NULL)
+ *
+ * Free a buffer allocated by kvmalloc
+ */
+void kvfree(void *buffer)
+{
+	if (is_vmalloc_addr(buffer)) {
+		/* Data is no longer valid so just use the allocated space
+		 * as the work_struct
+		 */
+		struct work_struct *work = (struct work_struct *) buffer;
+		INIT_WORK(work, do_vfree);
+		schedule_work(work);
+	} else
+		kfree(buffer);
+}
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
new file mode 100644
index 0000000..8db33a8
--- /dev/null
+++ b/security/apparmor/lsm.c
@@ -0,0 +1,938 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor LSM hooks.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/security.h>
+#include <linux/moduleparam.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/ptrace.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+#include <linux/audit.h>
+#include <net/sock.h>
+
+#include "include/apparmor.h"
+#include "include/apparmorfs.h"
+#include "include/audit.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/path.h"
+#include "include/policy.h"
+#include "include/procattr.h"
+
+/* Flag indicating whether initialization completed */
+int apparmor_initialized __initdata;
+
+/*
+ * LSM hook functions
+ */
+
+/*
+ * free the associated aa_task_cxt and put its profiles
+ */
+static void apparmor_cred_free(struct cred *cred)
+{
+	aa_free_task_context(cred->security);
+	cred->security = NULL;
+}
+
+/*
+ * allocate the apparmor part of blank credentials
+ */
+static int apparmor_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+	/* freed by apparmor_cred_free */
+	struct aa_task_cxt *cxt = aa_alloc_task_context(gfp);
+	if (!cxt)
+		return -ENOMEM;
+
+	cred->security = cxt;
+	return 0;
+}
+
+/*
+ * prepare new aa_task_cxt for modification by prepare_cred block
+ */
+static int apparmor_cred_prepare(struct cred *new, const struct cred *old,
+				 gfp_t gfp)
+{
+	/* freed by apparmor_cred_free */
+	struct aa_task_cxt *cxt = aa_alloc_task_context(gfp);
+	if (!cxt)
+		return -ENOMEM;
+
+	aa_dup_task_context(cxt, old->security);
+	new->security = cxt;
+	return 0;
+}
+
+/*
+ * transfer the apparmor data to a blank set of creds
+ */
+static void apparmor_cred_transfer(struct cred *new, const struct cred *old)
+{
+	const struct aa_task_cxt *old_cxt = old->security;
+	struct aa_task_cxt *new_cxt = new->security;
+
+	aa_dup_task_context(new_cxt, old_cxt);
+}
+
+static int apparmor_ptrace_access_check(struct task_struct *child,
+					unsigned int mode)
+{
+	int error = cap_ptrace_access_check(child, mode);
+	if (error)
+		return error;
+
+	return aa_ptrace(current, child, mode);
+}
+
+static int apparmor_ptrace_traceme(struct task_struct *parent)
+{
+	int error = cap_ptrace_traceme(parent);
+	if (error)
+		return error;
+
+	return aa_ptrace(parent, current, PTRACE_MODE_ATTACH);
+}
+
+/* Derived from security/commoncap.c:cap_capget */
+static int apparmor_capget(struct task_struct *target, kernel_cap_t *effective,
+			   kernel_cap_t *inheritable, kernel_cap_t *permitted)
+{
+	struct aa_profile *profile;
+	const struct cred *cred;
+
+	rcu_read_lock();
+	cred = __task_cred(target);
+	profile = aa_cred_profile(cred);
+
+	*effective = cred->cap_effective;
+	*inheritable = cred->cap_inheritable;
+	*permitted = cred->cap_permitted;
+
+	if (!unconfined(profile)) {
+		*effective = cap_intersect(*effective, profile->caps.allow);
+		*permitted = cap_intersect(*permitted, profile->caps.allow);
+	}
+	rcu_read_unlock();
+
+	return 0;
+}
+
+static int apparmor_capable(struct task_struct *task, const struct cred *cred,
+			    int cap, int audit)
+{
+	struct aa_profile *profile;
+	/* cap_capable returns 0 on success, else -EPERM */
+	int error = cap_capable(task, cred, cap, audit);
+	if (!error) {
+		profile = aa_cred_profile(cred);
+		if (!unconfined(profile))
+			error = aa_capable(task, profile, cap, audit);
+	}
+	return error;
+}
+
+/**
+ * common_perm - basic common permission check wrapper fn for paths
+ * @op: operation being checked
+ * @path: path to check permission of  (NOT NULL)
+ * @mask: requested permissions mask
+ * @cond: conditional info for the permission request  (NOT NULL)
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm(int op, struct path *path, u32 mask,
+		       struct path_cond *cond)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	profile = __aa_current_profile();
+	if (!unconfined(profile))
+		error = aa_path_perm(op, profile, path, 0, mask, cond);
+
+	return error;
+}
+
+/**
+ * common_perm_dir_dentry - common permission wrapper when path is dir, dentry
+ * @op: operation being checked
+ * @dir: directory of the dentry  (NOT NULL)
+ * @dentry: dentry to check  (NOT NULL)
+ * @mask: requested permissions mask
+ * @cond: conditional info for the permission request  (NOT NULL)
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_dir_dentry(int op, struct path *dir,
+				  struct dentry *dentry, u32 mask,
+				  struct path_cond *cond)
+{
+	struct path path = { dir->mnt, dentry };
+
+	return common_perm(op, &path, mask, cond);
+}
+
+/**
+ * common_perm_mnt_dentry - common permission wrapper when mnt, dentry
+ * @op: operation being checked
+ * @mnt: mount point of dentry (NOT NULL)
+ * @dentry: dentry to check  (NOT NULL)
+ * @mask: requested permissions mask
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_mnt_dentry(int op, struct vfsmount *mnt,
+				  struct dentry *dentry, u32 mask)
+{
+	struct path path = { mnt, dentry };
+	struct path_cond cond = { dentry->d_inode->i_uid,
+				  dentry->d_inode->i_mode
+	};
+
+	return common_perm(op, &path, mask, &cond);
+}
+
+/**
+ * common_perm_rm - common permission wrapper for operations doing rm
+ * @op: operation being checked
+ * @dir: directory that the dentry is in  (NOT NULL)
+ * @dentry: dentry being rm'd  (NOT NULL)
+ * @mask: requested permission mask
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_rm(int op, struct path *dir,
+			  struct dentry *dentry, u32 mask)
+{
+	struct inode *inode = dentry->d_inode;
+	struct path_cond cond = { };
+
+	if (!inode || !dir->mnt || !mediated_filesystem(inode))
+		return 0;
+
+	cond.uid = inode->i_uid;
+	cond.mode = inode->i_mode;
+
+	return common_perm_dir_dentry(op, dir, dentry, mask, &cond);
+}
+
+/**
+ * common_perm_create - common permission wrapper for operations doing create
+ * @op: operation being checked
+ * @dir: directory that dentry will be created in  (NOT NULL)
+ * @dentry: dentry to create   (NOT NULL)
+ * @mask: request permission mask
+ * @mode: created file mode
+ *
+ * Returns: %0 else error code if error or permission denied
+ */
+static int common_perm_create(int op, struct path *dir, struct dentry *dentry,
+			      u32 mask, umode_t mode)
+{
+	struct path_cond cond = { current_fsuid(), mode };
+
+	if (!dir->mnt || !mediated_filesystem(dir->dentry->d_inode))
+		return 0;
+
+	return common_perm_dir_dentry(op, dir, dentry, mask, &cond);
+}
+
+static int apparmor_path_unlink(struct path *dir, struct dentry *dentry)
+{
+	return common_perm_rm(OP_UNLINK, dir, dentry, AA_MAY_DELETE);
+}
+
+static int apparmor_path_mkdir(struct path *dir, struct dentry *dentry,
+			       int mode)
+{
+	return common_perm_create(OP_MKDIR, dir, dentry, AA_MAY_CREATE,
+				  S_IFDIR);
+}
+
+static int apparmor_path_rmdir(struct path *dir, struct dentry *dentry)
+{
+	return common_perm_rm(OP_RMDIR, dir, dentry, AA_MAY_DELETE);
+}
+
+static int apparmor_path_mknod(struct path *dir, struct dentry *dentry,
+			       int mode, unsigned int dev)
+{
+	return common_perm_create(OP_MKNOD, dir, dentry, AA_MAY_CREATE, mode);
+}
+
+static int apparmor_path_truncate(struct path *path)
+{
+	struct path_cond cond = { path->dentry->d_inode->i_uid,
+				  path->dentry->d_inode->i_mode
+	};
+
+	if (!path->mnt || !mediated_filesystem(path->dentry->d_inode))
+		return 0;
+
+	return common_perm(OP_TRUNC, path, MAY_WRITE | AA_MAY_META_WRITE,
+			   &cond);
+}
+
+static int apparmor_path_symlink(struct path *dir, struct dentry *dentry,
+				 const char *old_name)
+{
+	return common_perm_create(OP_SYMLINK, dir, dentry, AA_MAY_CREATE,
+				  S_IFLNK);
+}
+
+static int apparmor_path_link(struct dentry *old_dentry, struct path *new_dir,
+			      struct dentry *new_dentry)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(old_dentry->d_inode))
+		return 0;
+
+	profile = aa_current_profile();
+	if (!unconfined(profile))
+		error = aa_path_link(profile, old_dentry, new_dir, new_dentry);
+	return error;
+}
+
+static int apparmor_path_rename(struct path *old_dir, struct dentry *old_dentry,
+				struct path *new_dir, struct dentry *new_dentry)
+{
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(old_dentry->d_inode))
+		return 0;
+
+	profile = aa_current_profile();
+	if (!unconfined(profile)) {
+		struct path old_path = { old_dir->mnt, old_dentry };
+		struct path new_path = { new_dir->mnt, new_dentry };
+		struct path_cond cond = { old_dentry->d_inode->i_uid,
+					  old_dentry->d_inode->i_mode
+		};
+
+		error = aa_path_perm(OP_RENAME_SRC, profile, &old_path, 0,
+				     MAY_READ | AA_MAY_META_READ | MAY_WRITE |
+				     AA_MAY_META_WRITE | AA_MAY_DELETE,
+				     &cond);
+		if (!error)
+			error = aa_path_perm(OP_RENAME_DEST, profile, &new_path,
+					     0, MAY_WRITE | AA_MAY_META_WRITE |
+					     AA_MAY_CREATE, &cond);
+
+	}
+	return error;
+}
+
+static int apparmor_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
+			       mode_t mode)
+{
+	if (!mediated_filesystem(dentry->d_inode))
+		return 0;
+
+	return common_perm_mnt_dentry(OP_CHMOD, mnt, dentry, AA_MAY_CHMOD);
+}
+
+static int apparmor_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	struct path_cond cond =  { path->dentry->d_inode->i_uid,
+				   path->dentry->d_inode->i_mode
+	};
+
+	if (!mediated_filesystem(path->dentry->d_inode))
+		return 0;
+
+	return common_perm(OP_CHOWN, path, AA_MAY_CHOWN, &cond);
+}
+
+static int apparmor_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
+{
+	if (!mediated_filesystem(dentry->d_inode))
+		return 0;
+
+	return common_perm_mnt_dentry(OP_GETATTR, mnt, dentry,
+				      AA_MAY_META_READ);
+}
+
+static int apparmor_dentry_open(struct file *file, const struct cred *cred)
+{
+	struct aa_file_cxt *fcxt = file->f_security;
+	struct aa_profile *profile;
+	int error = 0;
+
+	if (!mediated_filesystem(file->f_path.dentry->d_inode))
+		return 0;
+
+	/* If in exec, permission is handled by bprm hooks.
+	 * Cache permissions granted by the previous exec check, with
+	 * implicit read and executable mmap which are required to
+	 * actually execute the image.
+	 */
+	if (current->in_execve) {
+		fcxt->allow = MAY_EXEC | MAY_READ | AA_EXEC_MMAP;
+		return 0;
+	}
+
+	profile = aa_cred_profile(cred);
+	if (!unconfined(profile)) {
+		struct inode *inode = file->f_path.dentry->d_inode;
+		struct path_cond cond = { inode->i_uid, inode->i_mode };
+
+		error = aa_path_perm(OP_OPEN, profile, &file->f_path, 0,
+				     aa_map_file_to_perms(file), &cond);
+		/* todo cache full allowed permissions set and state */
+		fcxt->allow = aa_map_file_to_perms(file);
+	}
+
+	return error;
+}
+
+static int apparmor_file_alloc_security(struct file *file)
+{
+	/* freed by apparmor_file_free_security */
+	file->f_security = aa_alloc_file_context(GFP_KERNEL);
+	if (!file->f_security)
+		return -ENOMEM;
+	return 0;
+
+}
+
+static void apparmor_file_free_security(struct file *file)
+{
+	struct aa_file_cxt *cxt = file->f_security;
+
+	aa_free_file_context(cxt);
+}
+
+static int common_file_perm(int op, struct file *file, u32 mask)
+{
+	struct aa_file_cxt *fcxt = file->f_security;
+	struct aa_profile *profile, *fprofile = aa_cred_profile(file->f_cred);
+	int error = 0;
+
+	BUG_ON(!fprofile);
+
+	if (!file->f_path.mnt ||
+	    !mediated_filesystem(file->f_path.dentry->d_inode))
+		return 0;
+
+	profile = __aa_current_profile();
+
+	/* revalidate access, if task is unconfined, or the cached cred
+	 * doesn't match or if the request is for more permissions than
+	 * was granted.
+	 *
+	 * Note: the test for !unconfined(fprofile) is to handle file
+	 *       delegation from unconfined tasks
+	 */
+	if (!unconfined(profile) && !unconfined(fprofile) &&
+	    ((fprofile != profile) || (mask & ~fcxt->allow)))
+		error = aa_file_perm(op, profile, file, mask);
+
+	return error;
+}
+
+static int apparmor_file_permission(struct file *file, int mask)
+{
+	return common_file_perm(OP_FPERM, file, mask);
+}
+
+static int apparmor_file_lock(struct file *file, unsigned int cmd)
+{
+	u32 mask = AA_MAY_LOCK;
+
+	if (cmd == F_WRLCK)
+		mask |= MAY_WRITE;
+
+	return common_file_perm(OP_FLOCK, file, mask);
+}
+
+static int common_mmap(int op, struct file *file, unsigned long prot,
+		       unsigned long flags)
+{
+	struct dentry *dentry;
+	int mask = 0;
+
+	if (!file || !file->f_security)
+		return 0;
+
+	if (prot & PROT_READ)
+		mask |= MAY_READ;
+	/*
+	 * Private mappings don't require write perms since they don't
+	 * write back to the files
+	 */
+	if ((prot & PROT_WRITE) && !(flags & MAP_PRIVATE))
+		mask |= MAY_WRITE;
+	if (prot & PROT_EXEC)
+		mask |= AA_EXEC_MMAP;
+
+	dentry = file->f_path.dentry;
+	return common_file_perm(op, file, mask);
+}
+
+static int apparmor_file_mmap(struct file *file, unsigned long reqprot,
+			      unsigned long prot, unsigned long flags,
+			      unsigned long addr, unsigned long addr_only)
+{
+	int rc = 0;
+
+	/* do DAC check */
+	rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
+	if (rc || addr_only)
+		return rc;
+
+	return common_mmap(OP_FMMAP, file, prot, flags);
+}
+
+static int apparmor_file_mprotect(struct vm_area_struct *vma,
+				  unsigned long reqprot, unsigned long prot)
+{
+	return common_mmap(OP_FMPROT, vma->vm_file, prot,
+			   !(vma->vm_flags & VM_SHARED) ? MAP_PRIVATE : 0);
+}
+
+static int apparmor_getprocattr(struct task_struct *task, char *name,
+				char **value)
+{
+	int error = -ENOENT;
+	struct aa_profile *profile;
+	/* released below */
+	const struct cred *cred = get_task_cred(task);
+	struct aa_task_cxt *cxt = cred->security;
+	profile = aa_cred_profile(cred);
+
+	if (strcmp(name, "current") == 0)
+		error = aa_getprocattr(aa_newest_version(cxt->profile),
+				       value);
+	else if (strcmp(name, "prev") == 0  && cxt->previous)
+		error = aa_getprocattr(aa_newest_version(cxt->previous),
+				       value);
+	else if (strcmp(name, "exec") == 0 && cxt->onexec)
+		error = aa_getprocattr(aa_newest_version(cxt->onexec),
+				       value);
+	else
+		error = -EINVAL;
+
+	put_cred(cred);
+
+	return error;
+}
+
+static int apparmor_setprocattr(struct task_struct *task, char *name,
+				void *value, size_t size)
+{
+	char *command, *args = value;
+	size_t arg_size;
+	int error;
+
+	if (size == 0)
+		return -EINVAL;
+	/* args points to a PAGE_SIZE buffer, AppArmor requires that
+	 * the buffer must be null terminated or have size <= PAGE_SIZE -1
+	 * so that AppArmor can null terminate them
+	 */
+	if (args[size - 1] != '\0') {
+		if (size == PAGE_SIZE)
+			return -EINVAL;
+		args[size] = '\0';
+	}
+
+	/* task can only write its own attributes */
+	if (current != task)
+		return -EACCES;
+
+	args = value;
+	args = strim(args);
+	command = strsep(&args, " ");
+	if (!args)
+		return -EINVAL;
+	args = skip_spaces(args);
+	if (!*args)
+		return -EINVAL;
+
+	arg_size = size - (args - (char *) value);
+	if (strcmp(name, "current") == 0) {
+		if (strcmp(command, "changehat") == 0) {
+			error = aa_setprocattr_changehat(args, arg_size,
+							 !AA_DO_TEST);
+		} else if (strcmp(command, "permhat") == 0) {
+			error = aa_setprocattr_changehat(args, arg_size,
+							 AA_DO_TEST);
+		} else if (strcmp(command, "changeprofile") == 0) {
+			error = aa_setprocattr_changeprofile(args, !AA_ONEXEC,
+							     !AA_DO_TEST);
+		} else if (strcmp(command, "permprofile") == 0) {
+			error = aa_setprocattr_changeprofile(args, !AA_ONEXEC,
+							     AA_DO_TEST);
+		} else if (strcmp(command, "permipc") == 0) {
+			error = aa_setprocattr_permipc(args);
+		} else {
+			struct common_audit_data sa;
+			COMMON_AUDIT_DATA_INIT(&sa, NONE);
+			sa.aad.op = OP_SETPROCATTR;
+			sa.aad.info = name;
+			sa.aad.error = -EINVAL;
+			return aa_audit(AUDIT_APPARMOR_DENIED, NULL, GFP_KERNEL,
+					&sa, NULL);
+		}
+	} else if (strcmp(name, "exec") == 0) {
+		error = aa_setprocattr_changeprofile(args, AA_ONEXEC,
+						     !AA_DO_TEST);
+	} else {
+		/* only support the "current" and "exec" process attributes */
+		return -EINVAL;
+	}
+	if (!error)
+		error = size;
+	return error;
+}
+
+static int apparmor_task_setrlimit(unsigned int resource,
+				   struct rlimit *new_rlim)
+{
+	struct aa_profile *profile = aa_current_profile();
+	int error = 0;
+
+	if (!unconfined(profile))
+		error = aa_task_setrlimit(profile, resource, new_rlim);
+
+	return error;
+}
+
+static struct security_operations apparmor_ops = {
+	.name =				"apparmor",
+
+	.ptrace_access_check =		apparmor_ptrace_access_check,
+	.ptrace_traceme =		apparmor_ptrace_traceme,
+	.capget =			apparmor_capget,
+	.capable =			apparmor_capable,
+
+	.path_link =			apparmor_path_link,
+	.path_unlink =			apparmor_path_unlink,
+	.path_symlink =			apparmor_path_symlink,
+	.path_mkdir =			apparmor_path_mkdir,
+	.path_rmdir =			apparmor_path_rmdir,
+	.path_mknod =			apparmor_path_mknod,
+	.path_rename =			apparmor_path_rename,
+	.path_chmod =			apparmor_path_chmod,
+	.path_chown =			apparmor_path_chown,
+	.path_truncate =		apparmor_path_truncate,
+	.dentry_open =			apparmor_dentry_open,
+	.inode_getattr =                apparmor_inode_getattr,
+
+	.file_permission =		apparmor_file_permission,
+	.file_alloc_security =		apparmor_file_alloc_security,
+	.file_free_security =		apparmor_file_free_security,
+	.file_mmap =			apparmor_file_mmap,
+	.file_mprotect =		apparmor_file_mprotect,
+	.file_lock =			apparmor_file_lock,
+
+	.getprocattr =			apparmor_getprocattr,
+	.setprocattr =			apparmor_setprocattr,
+
+	.cred_alloc_blank =		apparmor_cred_alloc_blank,
+	.cred_free =			apparmor_cred_free,
+	.cred_prepare =			apparmor_cred_prepare,
+	.cred_transfer =		apparmor_cred_transfer,
+
+	.bprm_set_creds =		apparmor_bprm_set_creds,
+	.bprm_committing_creds =	apparmor_bprm_committing_creds,
+	.bprm_committed_creds =		apparmor_bprm_committed_creds,
+	.bprm_secureexec =		apparmor_bprm_secureexec,
+
+	.task_setrlimit =		apparmor_task_setrlimit,
+};
+
+/*
+ * AppArmor sysfs module parameters
+ */
+
+static int param_set_aabool(const char *val, struct kernel_param *kp);
+static int param_get_aabool(char *buffer, struct kernel_param *kp);
+#define param_check_aabool(name, p) __param_check(name, p, int)
+
+static int param_set_aauint(const char *val, struct kernel_param *kp);
+static int param_get_aauint(char *buffer, struct kernel_param *kp);
+#define param_check_aauint(name, p) __param_check(name, p, int)
+
+static int param_set_aalockpolicy(const char *val, struct kernel_param *kp);
+static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp);
+#define param_check_aalockpolicy(name, p) __param_check(name, p, int)
+
+static int param_set_audit(const char *val, struct kernel_param *kp);
+static int param_get_audit(char *buffer, struct kernel_param *kp);
+#define param_check_audit(name, p) __param_check(name, p, int)
+
+static int param_set_mode(const char *val, struct kernel_param *kp);
+static int param_get_mode(char *buffer, struct kernel_param *kp);
+#define param_check_mode(name, p) __param_check(name, p, int)
+
+/* Flag values, also controllable via /sys/module/apparmor/parameters
+ * We define special types as we want to do additional mediation.
+ */
+
+/* AppArmor global enforcement switch - complain, enforce, kill */
+enum profile_mode aa_g_profile_mode = APPARMOR_ENFORCE;
+module_param_call(mode, param_set_mode, param_get_mode,
+		  &aa_g_profile_mode, S_IRUSR | S_IWUSR);
+
+/* Debug mode */
+int aa_g_debug;
+module_param_named(debug, aa_g_debug, aabool, S_IRUSR | S_IWUSR);
+
+/* Audit mode */
+enum audit_mode aa_g_audit;
+module_param_call(audit, param_set_audit, param_get_audit,
+		  &aa_g_audit, S_IRUSR | S_IWUSR);
+
+/* Determines if audit header is included in audited messages.  This
+ * provides more context if the audit daemon is not running
+ */
+int aa_g_audit_header = 1;
+module_param_named(audit_header, aa_g_audit_header, aabool,
+		   S_IRUSR | S_IWUSR);
+
+/* lock out loading/removal of policy
+ * TODO: add in at boot loading of policy, which is the only way to
+ *       load policy, if lock_policy is set
+ */
+int aa_g_lock_policy;
+module_param_named(lock_policy, aa_g_lock_policy, aalockpolicy,
+		   S_IRUSR | S_IWUSR);
+
+/* Syscall logging mode */
+int aa_g_logsyscall;
+module_param_named(logsyscall, aa_g_logsyscall, aabool, S_IRUSR | S_IWUSR);
+
+/* Maximum pathname length before accesses will start getting rejected */
+unsigned int aa_g_path_max = 2 * PATH_MAX;
+module_param_named(path_max, aa_g_path_max, aauint, S_IRUSR | S_IWUSR);
+
+/* Determines how paranoid loading of policy is and how much verification
+ * on the loaded policy is done.
+ */
+int aa_g_paranoid_load = 1;
+module_param_named(paranoid_load, aa_g_paranoid_load, aabool,
+		   S_IRUSR | S_IWUSR);
+
+/* Boot time disable flag */
+static unsigned int apparmor_enabled = CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE;
+module_param_named(enabled, apparmor_enabled, aabool, S_IRUSR);
+
+static int __init apparmor_enabled_setup(char *str)
+{
+	unsigned long enabled;
+	int error = strict_strtoul(str, 0, &enabled);
+	if (!error)
+		apparmor_enabled = enabled ? 1 : 0;
+	return 1;
+}
+
+__setup("apparmor=", apparmor_enabled_setup);
+
+/* set global flag turning off the ability to load policy */
+static int param_set_aalockpolicy(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	if (aa_g_lock_policy)
+		return -EACCES;
+	return param_set_bool(val, kp);
+}
+
+static int param_get_aalockpolicy(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_bool(buffer, kp);
+}
+
+static int param_set_aabool(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_set_bool(val, kp);
+}
+
+static int param_get_aabool(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_bool(buffer, kp);
+}
+
+static int param_set_aauint(const char *val, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_set_uint(val, kp);
+}
+
+static int param_get_aauint(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+	return param_get_uint(buffer, kp);
+}
+
+static int param_get_audit(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	return sprintf(buffer, "%s", audit_mode_names[aa_g_audit]);
+}
+
+static int param_set_audit(const char *val, struct kernel_param *kp)
+{
+	int i;
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	if (!val)
+		return -EINVAL;
+
+	for (i = 0; i < AUDIT_MAX_INDEX; i++) {
+		if (strcmp(val, audit_mode_names[i]) == 0) {
+			aa_g_audit = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int param_get_mode(char *buffer, struct kernel_param *kp)
+{
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	return sprintf(buffer, "%s", profile_mode_names[aa_g_profile_mode]);
+}
+
+static int param_set_mode(const char *val, struct kernel_param *kp)
+{
+	int i;
+	if (!capable(CAP_MAC_ADMIN))
+		return -EPERM;
+
+	if (!apparmor_enabled)
+		return -EINVAL;
+
+	if (!val)
+		return -EINVAL;
+
+	for (i = 0; i < APPARMOR_NAMES_MAX_INDEX; i++) {
+		if (strcmp(val, profile_mode_names[i]) == 0) {
+			aa_g_profile_mode = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * AppArmor init functions
+ */
+
+/**
+ * set_init_cxt - set a task context and profile on the first task.
+ *
+ * TODO: allow setting an alternate profile than unconfined
+ */
+static int __init set_init_cxt(void)
+{
+	struct cred *cred = (struct cred *)current->real_cred;
+	struct aa_task_cxt *cxt;
+
+	cxt = aa_alloc_task_context(GFP_KERNEL);
+	if (!cxt)
+		return -ENOMEM;
+
+	cxt->profile = aa_get_profile(root_ns->unconfined);
+	cred->security = cxt;
+
+	return 0;
+}
+
+static int __init apparmor_init(void)
+{
+	int error;
+
+	if (!apparmor_enabled || !security_module_enable(&apparmor_ops)) {
+		aa_info_message("AppArmor disabled by boot time parameter");
+		apparmor_enabled = 0;
+		return 0;
+	}
+
+	error = aa_alloc_root_ns();
+	if (error) {
+		AA_ERROR("Unable to allocate default profile namespace\n");
+		goto alloc_out;
+	}
+
+	error = set_init_cxt();
+	if (error) {
+		AA_ERROR("Failed to set context on init task\n");
+		goto register_security_out;
+	}
+
+	error = register_security(&apparmor_ops);
+	if (error) {
+		AA_ERROR("Unable to register AppArmor\n");
+		goto register_security_out;
+	}
+
+	/* Report that AppArmor successfully initialized */
+	apparmor_initialized = 1;
+	if (aa_g_profile_mode == APPARMOR_COMPLAIN)
+		aa_info_message("AppArmor initialized: complain mode enabled");
+	else if (aa_g_profile_mode == APPARMOR_KILL)
+		aa_info_message("AppArmor initialized: kill mode enabled");
+	else
+		aa_info_message("AppArmor initialized");
+
+	return error;
+
+register_security_out:
+	aa_free_root_ns();
+
+alloc_out:
+	aa_destroy_aafs();
+
+	apparmor_enabled = 0;
+	return error;
+
+}
+
+security_initcall(apparmor_init);
diff --git a/security/apparmor/match.c b/security/apparmor/match.c
new file mode 100644
index 0000000..5cb4dc1
--- /dev/null
+++ b/security/apparmor/match.c
@@ -0,0 +1,353 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor dfa based regular expression matching engine
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/err.h>
+#include <linux/kref.h>
+
+#include "include/apparmor.h"
+#include "include/match.h"
+
+/**
+ * unpack_table - unpack a dfa table (one of accept, default, base, next check)
+ * @blob: data to unpack (NOT NULL)
+ * @bsize: size of blob
+ *
+ * Returns: pointer to table else NULL on failure
+ *
+ * NOTE: must be freed by kvfree (not kmalloc)
+ */
+static struct table_header *unpack_table(char *blob, size_t bsize)
+{
+	struct table_header *table = NULL;
+	struct table_header th;
+	size_t tsize;
+
+	if (bsize < sizeof(struct table_header))
+		goto out;
+
+	/* loaded td_id's start at 1, subtract 1 now to avoid doing
+	 * it every time we use td_id as an index
+	 */
+	th.td_id = be16_to_cpu(*(u16 *) (blob)) - 1;
+	th.td_flags = be16_to_cpu(*(u16 *) (blob + 2));
+	th.td_lolen = be32_to_cpu(*(u32 *) (blob + 8));
+	blob += sizeof(struct table_header);
+
+	if (!(th.td_flags == YYTD_DATA16 || th.td_flags == YYTD_DATA32 ||
+	      th.td_flags == YYTD_DATA8))
+		goto out;
+
+	tsize = table_size(th.td_lolen, th.td_flags);
+	if (bsize < tsize)
+		goto out;
+
+	table = kvmalloc(tsize);
+	if (table) {
+		*table = th;
+		if (th.td_flags == YYTD_DATA8)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u8, byte_to_byte);
+		else if (th.td_flags == YYTD_DATA16)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u16, be16_to_cpu);
+		else if (th.td_flags == YYTD_DATA32)
+			UNPACK_ARRAY(table->td_data, blob, th.td_lolen,
+				     u32, be32_to_cpu);
+		else
+			goto fail;
+	}
+
+out:
+	/* if table was vmalloced make sure the page tables are synced
+	 * before it is used, as it goes live to all cpus.
+	 */
+	if (is_vmalloc_addr(table))
+		vm_unmap_aliases();
+	return table;
+fail:
+	kvfree(table);
+	return NULL;
+}
+
+/**
+ * verify_dfa - verify that transitions and states in the tables are in bounds.
+ * @dfa: dfa to test  (NOT NULL)
+ * @flags: flags controlling what type of accept table are acceptable
+ *
+ * Assumes dfa has gone through the first pass verification done by unpacking
+ * NOTE: this does not valid accept table values
+ *
+ * Returns: %0 else error code on failure to verify
+ */
+static int verify_dfa(struct aa_dfa *dfa, int flags)
+{
+	size_t i, state_count, trans_count;
+	int error = -EPROTO;
+
+	/* check that required tables exist */
+	if (!(dfa->tables[YYTD_ID_DEF] &&
+	      dfa->tables[YYTD_ID_BASE] &&
+	      dfa->tables[YYTD_ID_NXT] && dfa->tables[YYTD_ID_CHK]))
+		goto out;
+
+	/* accept.size == default.size == base.size */
+	state_count = dfa->tables[YYTD_ID_BASE]->td_lolen;
+	if (ACCEPT1_FLAGS(flags)) {
+		if (!dfa->tables[YYTD_ID_ACCEPT])
+			goto out;
+		if (state_count != dfa->tables[YYTD_ID_ACCEPT]->td_lolen)
+			goto out;
+	}
+	if (ACCEPT2_FLAGS(flags)) {
+		if (!dfa->tables[YYTD_ID_ACCEPT2])
+			goto out;
+		if (state_count != dfa->tables[YYTD_ID_ACCEPT2]->td_lolen)
+			goto out;
+	}
+	if (state_count != dfa->tables[YYTD_ID_DEF]->td_lolen)
+		goto out;
+
+	/* next.size == chk.size */
+	trans_count = dfa->tables[YYTD_ID_NXT]->td_lolen;
+	if (trans_count != dfa->tables[YYTD_ID_CHK]->td_lolen)
+		goto out;
+
+	/* if equivalence classes then its table size must be 256 */
+	if (dfa->tables[YYTD_ID_EC] &&
+	    dfa->tables[YYTD_ID_EC]->td_lolen != 256)
+		goto out;
+
+	if (flags & DFA_FLAG_VERIFY_STATES) {
+		for (i = 0; i < state_count; i++) {
+			if (DEFAULT_TABLE(dfa)[i] >= state_count)
+				goto out;
+			/* TODO: do check that DEF state recursion terminates */
+			if (BASE_TABLE(dfa)[i] + 255 >= trans_count) {
+				printk(KERN_ERR "AppArmor DFA next/check upper "
+				       "bounds error\n");
+				goto out;
+			}
+		}
+
+		for (i = 0; i < trans_count; i++) {
+			if (NEXT_TABLE(dfa)[i] >= state_count)
+				goto out;
+			if (CHECK_TABLE(dfa)[i] >= state_count)
+				goto out;
+		}
+	}
+
+	error = 0;
+out:
+	return error;
+}
+
+/**
+ * dfa_free - free a dfa allocated by aa_dfa_unpack
+ * @dfa: the dfa to free  (MAYBE NULL)
+ *
+ * Requires: reference count to dfa == 0
+ */
+static void dfa_free(struct aa_dfa *dfa)
+{
+	if (dfa) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(dfa->tables); i++) {
+			kvfree(dfa->tables[i]);
+			dfa->tables[i] = NULL;
+		}
+		kfree(dfa);
+	}
+}
+
+/**
+ * aa_dfa_free_kref - free aa_dfa by kref (called by aa_put_dfa)
+ * @kr: kref callback for freeing of a dfa  (NOT NULL)
+ */
+void aa_dfa_free_kref(struct kref *kref)
+{
+	struct aa_dfa *dfa = container_of(kref, struct aa_dfa, count);
+	dfa_free(dfa);
+}
+
+/**
+ * aa_dfa_unpack - unpack the binary tables of a serialized dfa
+ * @blob: aligned serialized stream of data to unpack  (NOT NULL)
+ * @size: size of data to unpack
+ * @flags: flags controlling what type of accept tables are acceptable
+ *
+ * Unpack a dfa that has been serialized.  To find information on the dfa
+ * format look in Documentation/apparmor.txt
+ * Assumes the dfa @blob stream has been aligned on a 8 byte boundry
+ *
+ * Returns: an unpacked dfa ready for matching or ERR_PTR on failure
+ */
+struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags)
+{
+	int hsize;
+	int error = -ENOMEM;
+	char *data = blob;
+	struct table_header *table = NULL;
+	struct aa_dfa *dfa = kzalloc(sizeof(struct aa_dfa), GFP_KERNEL);
+	if (!dfa)
+		goto fail;
+
+	kref_init(&dfa->count);
+
+	error = -EPROTO;
+
+	/* get dfa table set header */
+	if (size < sizeof(struct table_set_header))
+		goto fail;
+
+	if (ntohl(*(u32 *) data) != YYTH_MAGIC)
+		goto fail;
+
+	hsize = ntohl(*(u32 *) (data + 4));
+	if (size < hsize)
+		goto fail;
+
+	dfa->flags = ntohs(*(u16 *) (data + 12));
+	data += hsize;
+	size -= hsize;
+
+	while (size > 0) {
+		table = unpack_table(data, size);
+		if (!table)
+			goto fail;
+
+		switch (table->td_id) {
+		case YYTD_ID_ACCEPT:
+			if (!(table->td_flags & ACCEPT1_FLAGS(flags)))
+				goto fail;
+			break;
+		case YYTD_ID_ACCEPT2:
+			if (!(table->td_flags & ACCEPT2_FLAGS(flags)))
+				goto fail;
+			break;
+		case YYTD_ID_BASE:
+			if (table->td_flags != YYTD_DATA32)
+				goto fail;
+			break;
+		case YYTD_ID_DEF:
+		case YYTD_ID_NXT:
+		case YYTD_ID_CHK:
+			if (table->td_flags != YYTD_DATA16)
+				goto fail;
+			break;
+		case YYTD_ID_EC:
+			if (table->td_flags != YYTD_DATA8)
+				goto fail;
+			break;
+		default:
+			goto fail;
+		}
+		/* check for duplicate table entry */
+		if (dfa->tables[table->td_id])
+			goto fail;
+		dfa->tables[table->td_id] = table;
+		data += table_size(table->td_lolen, table->td_flags);
+		size -= table_size(table->td_lolen, table->td_flags);
+		table = NULL;
+	}
+
+	error = verify_dfa(dfa, flags);
+	if (error)
+		goto fail;
+
+	return dfa;
+
+fail:
+	kvfree(table);
+	dfa_free(dfa);
+	return ERR_PTR(error);
+}
+
+/**
+ * aa_dfa_match_len - traverse @dfa to find state @str stops at
+ * @dfa: the dfa to match @str against  (NOT NULL)
+ * @start: the state of the dfa to start matching in
+ * @str: the string of bytes to match against the dfa  (NOT NULL)
+ * @len: length of the string of bytes to match
+ *
+ * aa_dfa_match_len will match @str against the dfa and return the state it
+ * finished matching in. The final state can be used to look up the accepting
+ * label, or as the start state of a continuing match.
+ *
+ * This function will happily match again the 0 byte and only finishes
+ * when @len input is consumed.
+ *
+ * Returns: final state reached after input is consumed
+ */
+unsigned int aa_dfa_match_len(struct aa_dfa *dfa, unsigned int start,
+			      const char *str, int len)
+{
+	u16 *def = DEFAULT_TABLE(dfa);
+	u32 *base = BASE_TABLE(dfa);
+	u16 *next = NEXT_TABLE(dfa);
+	u16 *check = CHECK_TABLE(dfa);
+	unsigned int state = start, pos;
+
+	if (state == 0)
+		return 0;
+
+	/* current state is <state>, matching character *str */
+	if (dfa->tables[YYTD_ID_EC]) {
+		/* Equivalence class table defined */
+		u8 *equiv = EQUIV_TABLE(dfa);
+		/* default is direct to next state */
+		for (; len; len--) {
+			pos = base[state] + equiv[(u8) *str++];
+			if (check[pos] == state)
+				state = next[pos];
+			else
+				state = def[state];
+		}
+	} else {
+		/* default is direct to next state */
+		for (; len; len--) {
+			pos = base[state] + (u8) *str++;
+			if (check[pos] == state)
+				state = next[pos];
+			else
+				state = def[state];
+		}
+	}
+
+	return state;
+}
+
+/**
+ * aa_dfa_next_state - traverse @dfa to find state @str stops at
+ * @dfa: the dfa to match @str against  (NOT NULL)
+ * @start: the state of the dfa to start matching in
+ * @str: the null terminated string of bytes to match against the dfa (NOT NULL)
+ *
+ * aa_dfa_next_state will match @str against the dfa and return the state it
+ * finished matching in. The final state can be used to look up the accepting
+ * label, or as the start state of a continuing match.
+ *
+ * Returns: final state reached after input is consumed
+ */
+unsigned int aa_dfa_match(struct aa_dfa *dfa, unsigned int start,
+			  const char *str)
+{
+	return aa_dfa_match_len(dfa, start, str, strlen(str));
+}
diff --git a/security/apparmor/path.c b/security/apparmor/path.c
new file mode 100644
index 0000000..96bab946
--- /dev/null
+++ b/security/apparmor/path.c
@@ -0,0 +1,235 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor function for pathnames
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/magic.h>
+#include <linux/mnt_namespace.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/nsproxy.h>
+#include <linux/path.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/fs_struct.h>
+
+#include "include/apparmor.h"
+#include "include/path.h"
+#include "include/policy.h"
+
+
+/* modified from dcache.c */
+static int prepend(char **buffer, int buflen, const char *str, int namelen)
+{
+	buflen -= namelen;
+	if (buflen < 0)
+		return -ENAMETOOLONG;
+	*buffer -= namelen;
+	memcpy(*buffer, str, namelen);
+	return 0;
+}
+
+#define CHROOT_NSCONNECT (PATH_CHROOT_REL | PATH_CHROOT_NSCONNECT)
+
+/**
+ * d_namespace_path - lookup a name associated with a given path
+ * @path: path to lookup  (NOT NULL)
+ * @buf:  buffer to store path to  (NOT NULL)
+ * @buflen: length of @buf
+ * @name: Returns - pointer for start of path name with in @buf (NOT NULL)
+ * @flags: flags controlling path lookup
+ *
+ * Handle path name lookup.
+ *
+ * Returns: %0 else error code if path lookup fails
+ *          When no error the path name is returned in @name which points to
+ *          to a position in @buf
+ */
+static int d_namespace_path(struct path *path, char *buf, int buflen,
+			    char **name, int flags)
+{
+	struct path root, tmp;
+	char *res;
+	int deleted, connected;
+	int error = 0;
+
+	/* Get the root we want to resolve too */
+	if (flags & PATH_CHROOT_REL) {
+		/* resolve paths relative to chroot */
+		read_lock(&current->fs->lock);
+		root = current->fs->root;
+		/* released below */
+		path_get(&root);
+		read_unlock(&current->fs->lock);
+	} else {
+		/* resolve paths relative to namespace */
+		root.mnt = current->nsproxy->mnt_ns->root;
+		root.dentry = root.mnt->mnt_root;
+		/* released below */
+		path_get(&root);
+	}
+
+	spin_lock(&dcache_lock);
+	/* There is a race window between path lookup here and the
+	 * need to strip the " (deleted) string that __d_path applies
+	 * Detect the race and relookup the path
+	 *
+	 * The stripping of (deleted) is a hack that could be removed
+	 * with an updated __d_path
+	 */
+	do {
+		tmp = root;
+		deleted = d_unlinked(path->dentry);
+		res = __d_path(path, &tmp, buf, buflen);
+
+	} while (deleted != d_unlinked(path->dentry));
+	spin_unlock(&dcache_lock);
+
+	*name = res;
+	/* handle error conditions - and still allow a partial path to
+	 * be returned.
+	 */
+	if (IS_ERR(res)) {
+		error = PTR_ERR(res);
+		*name = buf;
+		goto out;
+	}
+	if (deleted) {
+		/* On some filesystems, newly allocated dentries appear to the
+		 * security_path hooks as a deleted dentry except without an
+		 * inode allocated.
+		 *
+		 * Remove the appended deleted text and return as string for
+		 * normal mediation, or auditing.  The (deleted) string is
+		 * guaranteed to be added in this case, so just strip it.
+		 */
+		buf[buflen - 11] = 0;	/* - (len(" (deleted)") +\0) */
+
+		if (path->dentry->d_inode && !(flags & PATH_MEDIATE_DELETED)) {
+			error = -ENOENT;
+			goto out;
+		}
+	}
+
+	/* Determine if the path is connected to the expected root */
+	connected = tmp.dentry == root.dentry && tmp.mnt == root.mnt;
+
+	/* If the path is not connected,
+	 * check if it is a sysctl and handle specially else remove any
+	 * leading / that __d_path may have returned.
+	 * Unless
+	 *     specifically directed to connect the path,
+	 * OR
+	 *     if in a chroot and doing chroot relative paths and the path
+	 *     resolves to the namespace root (would be connected outside
+	 *     of chroot) and specifically directed to connect paths to
+	 *     namespace root.
+	 */
+	if (!connected) {
+		/* is the disconnect path a sysctl? */
+		if (tmp.dentry->d_sb->s_magic == PROC_SUPER_MAGIC &&
+		    strncmp(*name, "/sys/", 5) == 0) {
+			/* TODO: convert over to using a per namespace
+			 * control instead of hard coded /proc
+			 */
+			error = prepend(name, *name - buf, "/proc", 5);
+		} else if (!(flags & PATH_CONNECT_PATH) &&
+			   !(((flags & CHROOT_NSCONNECT) == CHROOT_NSCONNECT) &&
+			     (tmp.mnt == current->nsproxy->mnt_ns->root &&
+			      tmp.dentry == tmp.mnt->mnt_root))) {
+			/* disconnected path, don't return pathname starting
+			 * with '/'
+			 */
+			error = -ESTALE;
+			if (*res == '/')
+				*name = res + 1;
+		}
+	}
+
+out:
+	path_put(&root);
+
+	return error;
+}
+
+/**
+ * get_name_to_buffer - get the pathname to a buffer ensure dir / is appended
+ * @path: path to get name for  (NOT NULL)
+ * @flags: flags controlling path lookup
+ * @buffer: buffer to put name in  (NOT NULL)
+ * @size: size of buffer
+ * @name: Returns - contains position of path name in @buffer (NOT NULL)
+ *
+ * Returns: %0 else error on failure
+ */
+static int get_name_to_buffer(struct path *path, int flags, char *buffer,
+			      int size, char **name)
+{
+	int adjust = (flags & PATH_IS_DIR) ? 1 : 0;
+	int error = d_namespace_path(path, buffer, size - adjust, name, flags);
+
+	if (!error && (flags & PATH_IS_DIR) && (*name)[1] != '\0')
+		/*
+		 * Append "/" to the pathname.  The root directory is a special
+		 * case; it already ends in slash.
+		 */
+		strcpy(&buffer[size - 2], "/");
+
+	return error;
+}
+
+/**
+ * aa_get_name - compute the pathname of a file
+ * @path: path the file  (NOT NULL)
+ * @flags: flags controlling path name generation
+ * @buffer: buffer that aa_get_name() allocated  (NOT NULL)
+ * @name: Returns - the generated path name if !error (NOT NULL)
+ *
+ * @name is a pointer to the beginning of the pathname (which usually differs
+ * from the beginning of the buffer), or NULL.  If there is an error @name
+ * may contain a partial or invalid name that can be used for audit purposes,
+ * but it can not be used for mediation.
+ *
+ * We need PATH_IS_DIR to indicate whether the file is a directory or not
+ * because the file may not yet exist, and so we cannot check the inode's
+ * file type.
+ *
+ * Returns: %0 else error code if could retrieve name
+ */
+int aa_get_name(struct path *path, int flags, char **buffer, const char **name)
+{
+	char *buf, *str = NULL;
+	int size = 256;
+	int error;
+
+	*name = NULL;
+	*buffer = NULL;
+	for (;;) {
+		/* freed by caller */
+		buf = kmalloc(size, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
+
+		error = get_name_to_buffer(path, flags, buf, size, &str);
+		if (error != -ENAMETOOLONG)
+			break;
+
+		kfree(buf);
+		size <<= 1;
+		if (size > aa_g_path_max)
+			return -ENAMETOOLONG;
+	}
+	*buffer = buf;
+	*name = str;
+
+	return error;
+}
diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
new file mode 100644
index 0000000..3cdc1ad
--- /dev/null
+++ b/security/apparmor/policy.c
@@ -0,0 +1,1184 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor policy manipulation functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor policy is based around profiles, which contain the rules a
+ * task is confined by.  Every task in the system has a profile attached
+ * to it determined either by matching "unconfined" tasks against the
+ * visible set of profiles or by following a profiles attachment rules.
+ *
+ * Each profile exists in a profile namespace which is a container of
+ * visible profiles.  Each namespace contains a special "unconfined" profile,
+ * which doesn't enforce any confinement on a task beyond DAC.
+ *
+ * Namespace and profile names can be written together in either
+ * of two syntaxes.
+ *	:namespace:profile - used by kernel interfaces for easy detection
+ *	namespace://profile - used by policy
+ *
+ * Profile names can not start with : or @ or ^ and may not contain \0
+ *
+ * Reserved profile names
+ *	unconfined - special automatically generated unconfined profile
+ *	inherit - special name to indicate profile inheritance
+ *	null-XXXX-YYYY - special automatically generated learning profiles
+ *
+ * Namespace names may not start with / or @ and may not contain \0 or :
+ * Reserved namespace names
+ *	user-XXXX - user defined profiles
+ *
+ * a // in a profile or namespace name indicates a hierarchical name with the
+ * name before the // being the parent and the name after the child.
+ *
+ * Profile and namespace hierarchies serve two different but similar purposes.
+ * The namespace contains the set of visible profiles that are considered
+ * for attachment.  The hierarchy of namespaces allows for virtualizing
+ * the namespace so that for example a chroot can have its own set of profiles
+ * which may define some local user namespaces.
+ * The profile hierarchy severs two distinct purposes,
+ * -  it allows for sub profiles or hats, which allows an application to run
+ *    subprograms under its own profile with different restriction than it
+ *    self, and not have it use the system profile.
+ *    eg. if a mail program starts an editor, the policy might make the
+ *        restrictions tighter on the editor tighter than the mail program,
+ *        and definitely different than general editor restrictions
+ * - it allows for binary hierarchy of profiles, so that execution history
+ *   is preserved.  This feature isn't exploited by AppArmor reference policy
+ *   but is allowed.  NOTE: this is currently suboptimal because profile
+ *   aliasing is not currently implemented so that a profile for each
+ *   level must be defined.
+ *   eg. /bin/bash///bin/ls as a name would indicate /bin/ls was started
+ *       from /bin/bash
+ *
+ *   A profile or namespace name that can contain one or more // separators
+ *   is referred to as an hname (hierarchical).
+ *   eg.  /bin/bash//bin/ls
+ *
+ *   An fqname is a name that may contain both namespace and profile hnames.
+ *   eg. :ns:/bin/bash//bin/ls
+ *
+ * NOTES:
+ *   - locking of profile lists is currently fairly coarse.  All profile
+ *     lists within a namespace use the namespace lock.
+ * FIXME: move profile lists to using rcu_lists
+ */
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include "include/apparmor.h"
+#include "include/capability.h"
+#include "include/context.h"
+#include "include/file.h"
+#include "include/ipc.h"
+#include "include/match.h"
+#include "include/path.h"
+#include "include/policy.h"
+#include "include/policy_unpack.h"
+#include "include/resource.h"
+#include "include/sid.h"
+
+
+/* root profile namespace */
+struct aa_namespace *root_ns;
+
+const char *profile_mode_names[] = {
+	"enforce",
+	"complain",
+	"kill",
+};
+
+/**
+ * hname_tail - find the last component of an hname
+ * @name: hname to find the base profile name component of  (NOT NULL)
+ *
+ * Returns: the tail (base profile name) name component of an hname
+ */
+static const char *hname_tail(const char *hname)
+{
+	char *split;
+	hname = strim((char *)hname);
+	for (split = strstr(hname, "//"); split; split = strstr(hname, "//"))
+		hname = split + 2;
+
+	return hname;
+}
+
+/**
+ * policy_init - initialize a policy structure
+ * @policy: policy to initialize  (NOT NULL)
+ * @prefix: prefix name if any is required.  (MAYBE NULL)
+ * @name: name of the policy, init will make a copy of it  (NOT NULL)
+ *
+ * Note: this fn creates a copy of strings passed in
+ *
+ * Returns: true if policy init successful
+ */
+static bool policy_init(struct aa_policy *policy, const char *prefix,
+			const char *name)
+{
+	/* freed by policy_free */
+	if (prefix) {
+		policy->hname = kmalloc(strlen(prefix) + strlen(name) + 3,
+					GFP_KERNEL);
+		if (policy->hname)
+			sprintf(policy->hname, "%s//%s", prefix, name);
+	} else
+		policy->hname = kstrdup(name, GFP_KERNEL);
+	if (!policy->hname)
+		return 0;
+	/* base.name is a substring of fqname */
+	policy->name = (char *)hname_tail(policy->hname);
+	INIT_LIST_HEAD(&policy->list);
+	INIT_LIST_HEAD(&policy->profiles);
+	kref_init(&policy->count);
+
+	return 1;
+}
+
+/**
+ * policy_destroy - free the elements referenced by @policy
+ * @policy: policy that is to have its elements freed  (NOT NULL)
+ */
+static void policy_destroy(struct aa_policy *policy)
+{
+	/* still contains profiles -- invalid */
+	if (!list_empty(&policy->profiles)) {
+		AA_ERROR("%s: internal error, "
+			 "policy '%s' still contains profiles\n",
+			 __func__, policy->name);
+		BUG();
+	}
+	if (!list_empty(&policy->list)) {
+		AA_ERROR("%s: internal error, policy '%s' still on list\n",
+			 __func__, policy->name);
+		BUG();
+	}
+
+	/* don't free name as its a subset of hname */
+	kzfree(policy->hname);
+}
+
+/**
+ * __policy_find - find a policy by @name on a policy list
+ * @head: list to search  (NOT NULL)
+ * @name: name to search for  (NOT NULL)
+ *
+ * Requires: correct locks for the @head list be held
+ *
+ * Returns: unrefcounted policy that match @name or NULL if not found
+ */
+static struct aa_policy *__policy_find(struct list_head *head, const char *name)
+{
+	struct aa_policy *policy;
+
+	list_for_each_entry(policy, head, list) {
+		if (!strcmp(policy->name, name))
+			return policy;
+	}
+	return NULL;
+}
+
+/**
+ * __policy_strn_find - find a policy that's name matches @len chars of @str
+ * @head: list to search  (NOT NULL)
+ * @str: string to search for  (NOT NULL)
+ * @len: length of match required
+ *
+ * Requires: correct locks for the @head list be held
+ *
+ * Returns: unrefcounted policy that match @str or NULL if not found
+ *
+ * if @len == strlen(@strlen) then this is equiv to __policy_find
+ * other wise it allows searching for policy by a partial match of name
+ */
+static struct aa_policy *__policy_strn_find(struct list_head *head,
+					    const char *str, int len)
+{
+	struct aa_policy *policy;
+
+	list_for_each_entry(policy, head, list) {
+		if (aa_strneq(policy->name, str, len))
+			return policy;
+	}
+
+	return NULL;
+}
+
+/*
+ * Routines for AppArmor namespaces
+ */
+
+static const char *hidden_ns_name = "---";
+/**
+ * aa_ns_visible - test if @view is visible from @curr
+ * @curr: namespace to treat as the parent (NOT NULL)
+ * @view:  namespace to test if visible from @curr (NOT NULL)
+ *
+ * Returns: true if @view is visible from @curr else false
+ */
+bool aa_ns_visible(struct aa_namespace *curr, struct aa_namespace *view)
+{
+	if (curr == view)
+		return true;
+
+	for ( ; view; view = view->parent) {
+		if (view->parent == curr)
+			return true;
+	}
+	return false;
+}
+
+/**
+ * aa_na_name - Find the ns name to display for @view from @curr
+ * @curr - current namespace (NOT NULL)
+ * @view - namespace attempting to view (NOT NULL)
+ *
+ * Returns: name of @view visible from @curr
+ */
+const char *aa_ns_name(struct aa_namespace *curr, struct aa_namespace *view)
+{
+	/* if view == curr then the namespace name isn't displayed */
+	if (curr == view)
+		return "";
+
+	if (aa_ns_visible(curr, view)) {
+		/* at this point if a ns is visible it is in a view ns
+		 * thus the curr ns.hname is a prefix of its name.
+		 * Only output the virtualized portion of the name
+		 * Add + 2 to skip over // separating curr hname prefix
+		 * from the visible tail of the views hname
+		 */
+		return view->base.hname + strlen(curr->base.hname) + 2;
+	} else
+		return hidden_ns_name;
+}
+
+/**
+ * alloc_namespace - allocate, initialize and return a new namespace
+ * @prefix: parent namespace name (MAYBE NULL)
+ * @name: a preallocated name  (NOT NULL)
+ *
+ * Returns: refcounted namespace or NULL on failure.
+ */
+static struct aa_namespace *alloc_namespace(const char *prefix,
+					    const char *name)
+{
+	struct aa_namespace *ns;
+
+	ns = kzalloc(sizeof(*ns), GFP_KERNEL);
+	AA_DEBUG("%s(%p)\n", __func__, ns);
+	if (!ns)
+		return NULL;
+	if (!policy_init(&ns->base, prefix, name))
+		goto fail_ns;
+
+	INIT_LIST_HEAD(&ns->sub_ns);
+	rwlock_init(&ns->lock);
+
+	/* released by free_namespace */
+	ns->unconfined = aa_alloc_profile("unconfined");
+	if (!ns->unconfined)
+		goto fail_unconfined;
+
+	ns->unconfined->sid = aa_alloc_sid();
+	ns->unconfined->flags = PFLAG_UNCONFINED | PFLAG_IX_ON_NAME_ERROR |
+	    PFLAG_IMMUTABLE;
+
+	/*
+	 * released by free_namespace, however __remove_namespace breaks
+	 * the cyclic references (ns->unconfined, and unconfined->ns) and
+	 * replaces with refs to parent namespace unconfined
+	 */
+	ns->unconfined->ns = aa_get_namespace(ns);
+
+	return ns;
+
+fail_unconfined:
+	kzfree(ns->base.name);
+fail_ns:
+	kzfree(ns);
+	return NULL;
+}
+
+/**
+ * free_namespace - free a profile namespace
+ * @ns: the namespace to free  (MAYBE NULL)
+ *
+ * Requires: All references to the namespace must have been put, if the
+ *           namespace was referenced by a profile confining a task,
+ */
+static void free_namespace(struct aa_namespace *ns)
+{
+	if (!ns)
+		return;
+
+	policy_destroy(&ns->base);
+	aa_put_namespace(ns->parent);
+
+	if (ns->unconfined && ns->unconfined->ns == ns)
+		ns->unconfined->ns = NULL;
+
+	aa_put_profile(ns->unconfined);
+	kzfree(ns);
+}
+
+/**
+ * aa_free_namespace_kref - free aa_namespace by kref (see aa_put_namespace)
+ * @kr: kref callback for freeing of a namespace  (NOT NULL)
+ */
+void aa_free_namespace_kref(struct kref *kref)
+{
+	free_namespace(container_of(kref, struct aa_namespace, base.count));
+}
+
+/**
+ * __aa_find_namespace - find a namespace on a list by @name
+ * @head: list to search for namespace on  (NOT NULL)
+ * @name: name of namespace to look for  (NOT NULL)
+ *
+ * Returns: unrefcounted namespace
+ *
+ * Requires: ns lock be held
+ */
+static struct aa_namespace *__aa_find_namespace(struct list_head *head,
+						const char *name)
+{
+	return (struct aa_namespace *)__policy_find(head, name);
+}
+
+/**
+ * aa_find_namespace  -  look up a profile namespace on the namespace list
+ * @root: namespace to search in  (NOT NULL)
+ * @name: name of namespace to find  (NOT NULL)
+ *
+ * Returns: a refcounted namespace on the list, or NULL if no namespace
+ *          called @name exists.
+ *
+ * refcount released by caller
+ */
+struct aa_namespace *aa_find_namespace(struct aa_namespace *root,
+				       const char *name)
+{
+	struct aa_namespace *ns = NULL;
+
+	read_lock(&root->lock);
+	ns = aa_get_namespace(__aa_find_namespace(&root->sub_ns, name));
+	read_unlock(&root->lock);
+
+	return ns;
+}
+
+/**
+ * aa_prepare_namespace - find an existing or create a new namespace of @name
+ * @name: the namespace to find or add  (MAYBE NULL)
+ *
+ * Returns: refcounted namespace or NULL if failed to create one
+ */
+static struct aa_namespace *aa_prepare_namespace(const char *name)
+{
+	struct aa_namespace *ns, *root;
+
+	root = aa_current_profile()->ns;
+
+	write_lock(&root->lock);
+
+	/* if name isn't specified the profile is loaded to the current ns */
+	if (!name) {
+		/* released by caller */
+		ns = aa_get_namespace(root);
+		goto out;
+	}
+
+	/* try and find the specified ns and if it doesn't exist create it */
+	/* released by caller */
+	ns = aa_get_namespace(__aa_find_namespace(&root->sub_ns, name));
+	if (!ns) {
+		/* namespace not found */
+		struct aa_namespace *new_ns;
+		write_unlock(&root->lock);
+		new_ns = alloc_namespace(root->base.hname, name);
+		if (!new_ns)
+			return NULL;
+		write_lock(&root->lock);
+		/* test for race when new_ns was allocated */
+		ns = __aa_find_namespace(&root->sub_ns, name);
+		if (!ns) {
+			/* add parent ref */
+			new_ns->parent = aa_get_namespace(root);
+
+			list_add(&new_ns->base.list, &root->sub_ns);
+			/* add list ref */
+			ns = aa_get_namespace(new_ns);
+		} else {
+			/* raced so free the new one */
+			free_namespace(new_ns);
+			/* get reference on namespace */
+			aa_get_namespace(ns);
+		}
+	}
+out:
+	write_unlock(&root->lock);
+
+	/* return ref */
+	return ns;
+}
+
+/**
+ * __list_add_profile - add a profile to a list
+ * @list: list to add it to  (NOT NULL)
+ * @profile: the profile to add  (NOT NULL)
+ *
+ * refcount @profile, should be put by __list_remove_profile
+ *
+ * Requires: namespace lock be held, or list not be shared
+ */
+static void __list_add_profile(struct list_head *list,
+			       struct aa_profile *profile)
+{
+	list_add(&profile->base.list, list);
+	/* get list reference */
+	aa_get_profile(profile);
+}
+
+/**
+ * __list_remove_profile - remove a profile from the list it is on
+ * @profile: the profile to remove  (NOT NULL)
+ *
+ * remove a profile from the list, warning generally removal should
+ * be done with __replace_profile as most profile removals are
+ * replacements to the unconfined profile.
+ *
+ * put @profile list refcount
+ *
+ * Requires: namespace lock be held, or list not have been live
+ */
+static void __list_remove_profile(struct aa_profile *profile)
+{
+	list_del_init(&profile->base.list);
+	if (!(profile->flags & PFLAG_NO_LIST_REF))
+		/* release list reference */
+		aa_put_profile(profile);
+}
+
+/**
+ * __replace_profile - replace @old with @new on a list
+ * @old: profile to be replaced  (NOT NULL)
+ * @new: profile to replace @old with  (NOT NULL)
+ *
+ * Will duplicate and refcount elements that @new inherits from @old
+ * and will inherit @old children.
+ *
+ * refcount @new for list, put @old list refcount
+ *
+ * Requires: namespace list lock be held, or list not be shared
+ */
+static void __replace_profile(struct aa_profile *old, struct aa_profile *new)
+{
+	struct aa_policy *policy;
+	struct aa_profile *child, *tmp;
+
+	if (old->parent)
+		policy = &old->parent->base;
+	else
+		policy = &old->ns->base;
+
+	/* released when @new is freed */
+	new->parent = aa_get_profile(old->parent);
+	new->ns = aa_get_namespace(old->ns);
+	new->sid = old->sid;
+	__list_add_profile(&policy->profiles, new);
+	/* inherit children */
+	list_for_each_entry_safe(child, tmp, &old->base.profiles, base.list) {
+		aa_put_profile(child->parent);
+		child->parent = aa_get_profile(new);
+		/* list refcount transferred to @new*/
+		list_move(&child->base.list, &new->base.profiles);
+	}
+
+	/* released by free_profile */
+	old->replacedby = aa_get_profile(new);
+	__list_remove_profile(old);
+}
+
+static void __profile_list_release(struct list_head *head);
+
+/**
+ * __remove_profile - remove old profile, and children
+ * @profile: profile to be replaced  (NOT NULL)
+ *
+ * Requires: namespace list lock be held, or list not be shared
+ */
+static void __remove_profile(struct aa_profile *profile)
+{
+	/* release any children lists first */
+	__profile_list_release(&profile->base.profiles);
+	/* released by free_profile */
+	profile->replacedby = aa_get_profile(profile->ns->unconfined);
+	__list_remove_profile(profile);
+}
+
+/**
+ * __profile_list_release - remove all profiles on the list and put refs
+ * @head: list of profiles  (NOT NULL)
+ *
+ * Requires: namespace lock be held
+ */
+static void __profile_list_release(struct list_head *head)
+{
+	struct aa_profile *profile, *tmp;
+	list_for_each_entry_safe(profile, tmp, head, base.list)
+		__remove_profile(profile);
+}
+
+static void __ns_list_release(struct list_head *head);
+
+/**
+ * destroy_namespace - remove everything contained by @ns
+ * @ns: namespace to have it contents removed  (NOT NULL)
+ */
+static void destroy_namespace(struct aa_namespace *ns)
+{
+	if (!ns)
+		return;
+
+	write_lock(&ns->lock);
+	/* release all profiles in this namespace */
+	__profile_list_release(&ns->base.profiles);
+
+	/* release all sub namespaces */
+	__ns_list_release(&ns->sub_ns);
+
+	write_unlock(&ns->lock);
+}
+
+/**
+ * __remove_namespace - remove a namespace and all its children
+ * @ns: namespace to be removed  (NOT NULL)
+ *
+ * Requires: ns->parent->lock be held and ns removed from parent.
+ */
+static void __remove_namespace(struct aa_namespace *ns)
+{
+	struct aa_profile *unconfined = ns->unconfined;
+
+	/* remove ns from namespace list */
+	list_del_init(&ns->base.list);
+
+	/*
+	 * break the ns, unconfined profile cyclic reference and forward
+	 * all new unconfined profiles requests to the parent namespace
+	 * This will result in all confined tasks that have a profile
+	 * being removed, inheriting the parent->unconfined profile.
+	 */
+	if (ns->parent)
+		ns->unconfined = aa_get_profile(ns->parent->unconfined);
+
+	destroy_namespace(ns);
+
+	/* release original ns->unconfined ref */
+	aa_put_profile(unconfined);
+	/* release ns->base.list ref, from removal above */
+	aa_put_namespace(ns);
+}
+
+/**
+ * __ns_list_release - remove all profile namespaces on the list put refs
+ * @head: list of profile namespaces  (NOT NULL)
+ *
+ * Requires: namespace lock be held
+ */
+static void __ns_list_release(struct list_head *head)
+{
+	struct aa_namespace *ns, *tmp;
+	list_for_each_entry_safe(ns, tmp, head, base.list)
+		__remove_namespace(ns);
+
+}
+
+/**
+ * aa_alloc_root_ns - allocate the root profile namespace
+ *
+ * Returns: %0 on success else error
+ *
+ */
+int __init aa_alloc_root_ns(void)
+{
+	/* released by aa_free_root_ns - used as list ref*/
+	root_ns = alloc_namespace(NULL, "root");
+	if (!root_ns)
+		return -ENOMEM;
+
+	return 0;
+}
+
+ /**
+  * aa_free_root_ns - free the root profile namespace
+  */
+void __init aa_free_root_ns(void)
+ {
+	 struct aa_namespace *ns = root_ns;
+	 root_ns = NULL;
+
+	 destroy_namespace(ns);
+	 aa_put_namespace(ns);
+}
+
+/**
+ * aa_alloc_profile - allocate, initialize and return a new profile
+ * @hname: name of the profile  (NOT NULL)
+ *
+ * Returns: refcount profile or NULL on failure
+ */
+struct aa_profile *aa_alloc_profile(const char *hname)
+{
+	struct aa_profile *profile;
+
+	/* freed by free_profile - usually through aa_put_profile */
+	profile = kzalloc(sizeof(*profile), GFP_KERNEL);
+	if (!profile)
+		return NULL;
+
+	if (!policy_init(&profile->base, NULL, hname)) {
+		kzfree(profile);
+		return NULL;
+	}
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * aa_new_null_profile - create a new null-X learning profile
+ * @parent: profile that caused this profile to be created (NOT NULL)
+ * @hat: true if the null- learning profile is a hat
+ *
+ * Create a null- complain mode profile used in learning mode.  The name of
+ * the profile is unique and follows the format of parent//null-sid.
+ *
+ * null profiles are added to the profile list but the list does not
+ * hold a count on them so that they are automatically released when
+ * not in use.
+ *
+ * Returns: new refcounted profile else NULL on failure
+ */
+struct aa_profile *aa_new_null_profile(struct aa_profile *parent, int hat)
+{
+	struct aa_profile *profile = NULL;
+	char *name;
+	u32 sid = aa_alloc_sid();
+
+	/* freed below */
+	name = kmalloc(strlen(parent->base.hname) + 2 + 7 + 8, GFP_KERNEL);
+	if (!name)
+		goto fail;
+	sprintf(name, "%s//null-%x", parent->base.hname, sid);
+
+	profile = aa_alloc_profile(name);
+	kfree(name);
+	if (!profile)
+		goto fail;
+
+	profile->sid = sid;
+	profile->mode = APPARMOR_COMPLAIN;
+	profile->flags = PFLAG_NULL;
+	if (hat)
+		profile->flags |= PFLAG_HAT;
+
+	/* released on free_profile */
+	profile->parent = aa_get_profile(parent);
+	profile->ns = aa_get_namespace(parent->ns);
+
+	write_lock(&profile->ns->lock);
+	__list_add_profile(&parent->base.profiles, profile);
+	write_unlock(&profile->ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+
+fail:
+	aa_free_sid(sid);
+	return NULL;
+}
+
+/**
+ * free_profile - free a profile
+ * @profile: the profile to free  (MAYBE NULL)
+ *
+ * Free a profile, its hats and null_profile. All references to the profile,
+ * its hats and null_profile must have been put.
+ *
+ * If the profile was referenced from a task context, free_profile() will
+ * be called from an rcu callback routine, so we must not sleep here.
+ */
+static void free_profile(struct aa_profile *profile)
+{
+	AA_DEBUG("%s(%p)\n", __func__, profile);
+
+	if (!profile)
+		return;
+
+	if (!list_empty(&profile->base.list)) {
+		AA_ERROR("%s: internal error, "
+			 "profile '%s' still on ns list\n",
+			 __func__, profile->base.name);
+		BUG();
+	}
+
+	/* free children profiles */
+	policy_destroy(&profile->base);
+	aa_put_profile(profile->parent);
+
+	aa_put_namespace(profile->ns);
+	kzfree(profile->rename);
+
+	aa_free_file_rules(&profile->file);
+	aa_free_cap_rules(&profile->caps);
+	aa_free_rlimit_rules(&profile->rlimits);
+
+	aa_free_sid(profile->sid);
+	aa_put_dfa(profile->xmatch);
+
+	aa_put_profile(profile->replacedby);
+
+	kzfree(profile);
+}
+
+/**
+ * aa_free_profile_kref - free aa_profile by kref (called by aa_put_profile)
+ * @kr: kref callback for freeing of a profile  (NOT NULL)
+ */
+void aa_free_profile_kref(struct kref *kref)
+{
+	struct aa_profile *p = container_of(kref, struct aa_profile,
+					    base.count);
+
+	free_profile(p);
+}
+
+/* TODO: profile accounting - setup in remove */
+
+/**
+ * __find_child - find a profile on @head list with a name matching @name
+ * @head: list to search  (NOT NULL)
+ * @name: name of profile (NOT NULL)
+ *
+ * Requires: ns lock protecting list be held
+ *
+ * Returns: unrefcounted profile ptr, or NULL if not found
+ */
+static struct aa_profile *__find_child(struct list_head *head, const char *name)
+{
+	return (struct aa_profile *)__policy_find(head, name);
+}
+
+/**
+ * __strn_find_child - find a profile on @head list using substring of @name
+ * @head: list to search  (NOT NULL)
+ * @name: name of profile (NOT NULL)
+ * @len: length of @name substring to match
+ *
+ * Requires: ns lock protecting list be held
+ *
+ * Returns: unrefcounted profile ptr, or NULL if not found
+ */
+static struct aa_profile *__strn_find_child(struct list_head *head,
+					    const char *name, int len)
+{
+	return (struct aa_profile *)__policy_strn_find(head, name, len);
+}
+
+/**
+ * aa_find_child - find a profile by @name in @parent
+ * @parent: profile to search  (NOT NULL)
+ * @name: profile name to search for  (NOT NULL)
+ *
+ * Returns: a refcounted profile or NULL if not found
+ */
+struct aa_profile *aa_find_child(struct aa_profile *parent, const char *name)
+{
+	struct aa_profile *profile;
+
+	read_lock(&parent->ns->lock);
+	profile = aa_get_profile(__find_child(&parent->base.profiles, name));
+	read_unlock(&parent->ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * __lookup_parent - lookup the parent of a profile of name @hname
+ * @ns: namespace to lookup profile in  (NOT NULL)
+ * @hname: hierarchical profile name to find parent of  (NOT NULL)
+ *
+ * Lookups up the parent of a fully qualified profile name, the profile
+ * that matches hname does not need to exist, in general this
+ * is used to load a new profile.
+ *
+ * Requires: ns->lock be held
+ *
+ * Returns: unrefcounted policy or NULL if not found
+ */
+static struct aa_policy *__lookup_parent(struct aa_namespace *ns,
+					 const char *hname)
+{
+	struct aa_policy *policy;
+	struct aa_profile *profile = NULL;
+	char *split;
+
+	policy = &ns->base;
+
+	for (split = strstr(hname, "//"); split;) {
+		profile = __strn_find_child(&policy->profiles, hname,
+					    split - hname);
+		if (!profile)
+			return NULL;
+		policy = &profile->base;
+		hname = split + 2;
+		split = strstr(hname, "//");
+	}
+	if (!profile)
+		return &ns->base;
+	return &profile->base;
+}
+
+/**
+ * __lookup_profile - lookup the profile matching @hname
+ * @base: base list to start looking up profile name from  (NOT NULL)
+ * @hname: hierarchical profile name  (NOT NULL)
+ *
+ * Requires: ns->lock be held
+ *
+ * Returns: unrefcounted profile pointer or NULL if not found
+ *
+ * Do a relative name lookup, recursing through profile tree.
+ */
+static struct aa_profile *__lookup_profile(struct aa_policy *base,
+					   const char *hname)
+{
+	struct aa_profile *profile = NULL;
+	char *split;
+
+	for (split = strstr(hname, "//"); split;) {
+		profile = __strn_find_child(&base->profiles, hname,
+					    split - hname);
+		if (!profile)
+			return NULL;
+
+		base = &profile->base;
+		hname = split + 2;
+		split = strstr(hname, "//");
+	}
+
+	profile = __find_child(&base->profiles, hname);
+
+	return profile;
+}
+
+/**
+ * aa_lookup_profile - find a profile by its full or partial name
+ * @ns: the namespace to start from (NOT NULL)
+ * @hname: name to do lookup on.  Does not contain namespace prefix (NOT NULL)
+ *
+ * Returns: refcounted profile or NULL if not found
+ */
+struct aa_profile *aa_lookup_profile(struct aa_namespace *ns, const char *hname)
+{
+	struct aa_profile *profile;
+
+	read_lock(&ns->lock);
+	profile = aa_get_profile(__lookup_profile(&ns->base, hname));
+	read_unlock(&ns->lock);
+
+	/* refcount released by caller */
+	return profile;
+}
+
+/**
+ * replacement_allowed - test to see if replacement is allowed
+ * @profile: profile to test if it can be replaced  (MAYBE NULL)
+ * @noreplace: true if replacement shouldn't be allowed but addition is okay
+ * @info: Returns - info about why replacement failed (NOT NULL)
+ *
+ * Returns: %0 if replacement allowed else error code
+ */
+static int replacement_allowed(struct aa_profile *profile, int noreplace,
+			       const char **info)
+{
+	if (profile) {
+		if (profile->flags & PFLAG_IMMUTABLE) {
+			*info = "cannot replace immutible profile";
+			return -EPERM;
+		} else if (noreplace) {
+			*info = "profile already exists";
+			return -EEXIST;
+		}
+	}
+	return 0;
+}
+
+/**
+ * __add_new_profile - simple wrapper around __list_add_profile
+ * @ns: namespace that profile is being added to  (NOT NULL)
+ * @policy: the policy container to add the profile to  (NOT NULL)
+ * @profile: profile to add  (NOT NULL)
+ *
+ * add a profile to a list and do other required basic allocations
+ */
+static void __add_new_profile(struct aa_namespace *ns, struct aa_policy *policy,
+			      struct aa_profile *profile)
+{
+	if (policy != &ns->base)
+		/* released on profile replacement or free_profile */
+		profile->parent = aa_get_profile((struct aa_profile *) policy);
+	__list_add_profile(&policy->profiles, profile);
+	/* released on free_profile */
+	profile->sid = aa_alloc_sid();
+	profile->ns = aa_get_namespace(ns);
+}
+
+/**
+ * aa_audit_policy - Do auditing of policy changes
+ * @op: policy operation being performed
+ * @gfp: memory allocation flags
+ * @name: name of profile being manipulated (NOT NULL)
+ * @info: any extra information to be audited (MAYBE NULL)
+ * @error: error code
+ *
+ * Returns: the error to be returned after audit is done
+ */
+static int audit_policy(int op, gfp_t gfp, const char *name, const char *info,
+			int error)
+{
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = op;
+	sa.aad.name = name;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_STATUS, __aa_current_profile(), gfp,
+			&sa, NULL);
+}
+
+/**
+ * aa_may_manage_policy - can the current task manage policy
+ * @op: the policy manipulation operation being done
+ *
+ * Returns: true if the task is allowed to manipulate policy
+ */
+bool aa_may_manage_policy(int op)
+{
+	/* check if loading policy is locked out */
+	if (aa_g_lock_policy) {
+		audit_policy(op, GFP_KERNEL, NULL, "policy_locked", -EACCES);
+		return 0;
+	}
+
+	if (!capable(CAP_MAC_ADMIN)) {
+		audit_policy(op, GFP_KERNEL, NULL, "not policy admin", -EACCES);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * aa_replace_profiles - replace profile(s) on the profile list
+ * @udata: serialized data stream  (NOT NULL)
+ * @size: size of the serialized data stream
+ * @noreplace: true if only doing addition, no replacement allowed
+ *
+ * unpack and replace a profile on the profile list and uses of that profile
+ * by any aa_task_cxt.  If the profile does not exist on the profile list
+ * it is added.
+ *
+ * Returns: size of data consumed else error code on failure.
+ */
+ssize_t aa_replace_profiles(void *udata, size_t size, bool noreplace)
+{
+	struct aa_policy *policy;
+	struct aa_profile *old_profile = NULL, *new_profile = NULL;
+	struct aa_profile *rename_profile = NULL;
+	struct aa_namespace *ns = NULL;
+	const char *ns_name, *name = NULL, *info = NULL;
+	int op = OP_PROF_REPL;
+	ssize_t error;
+
+	/* released below */
+	new_profile = aa_unpack(udata, size, &ns_name);
+	if (IS_ERR(new_profile)) {
+		error = PTR_ERR(new_profile);
+		new_profile = NULL;
+		goto fail;
+	}
+
+	/* released below */
+	ns = aa_prepare_namespace(ns_name);
+	if (!ns) {
+		info = "failed to prepare namespace";
+		error = -ENOMEM;
+		name = ns_name;
+		goto fail;
+	}
+
+	name = new_profile->base.hname;
+
+	write_lock(&ns->lock);
+	/* no ref on policy only use inside lock */
+	policy = __lookup_parent(ns, new_profile->base.hname);
+
+	if (!policy) {
+		info = "parent does not exist";
+		error = -ENOENT;
+		goto audit;
+	}
+
+	old_profile = __find_child(&policy->profiles, new_profile->base.name);
+	/* released below */
+	aa_get_profile(old_profile);
+
+	if (new_profile->rename) {
+		rename_profile = __lookup_profile(&ns->base,
+						  new_profile->rename);
+		/* released below */
+		aa_get_profile(rename_profile);
+
+		if (!rename_profile) {
+			info = "profile to rename does not exist";
+			name = new_profile->rename;
+			error = -ENOENT;
+			goto audit;
+		}
+	}
+
+	error = replacement_allowed(old_profile, noreplace, &info);
+	if (error)
+		goto audit;
+
+	error = replacement_allowed(rename_profile, noreplace, &info);
+	if (error)
+		goto audit;
+
+audit:
+	if (!old_profile && !rename_profile)
+		op = OP_PROF_LOAD;
+
+	error = audit_policy(op, GFP_ATOMIC, name, info, error);
+
+	if (!error) {
+		if (rename_profile)
+			__replace_profile(rename_profile, new_profile);
+		if (old_profile) {
+			/* when there are both rename and old profiles
+			 * inherit old profiles sid
+			 */
+			if (rename_profile)
+				aa_free_sid(new_profile->sid);
+			__replace_profile(old_profile, new_profile);
+		}
+		if (!(old_profile || rename_profile))
+			__add_new_profile(ns, policy, new_profile);
+	}
+	write_unlock(&ns->lock);
+
+out:
+	aa_put_namespace(ns);
+	aa_put_profile(rename_profile);
+	aa_put_profile(old_profile);
+	aa_put_profile(new_profile);
+	if (error)
+		return error;
+	return size;
+
+fail:
+	error = audit_policy(op, GFP_KERNEL, name, info, error);
+	goto out;
+}
+
+/**
+ * aa_remove_profiles - remove profile(s) from the system
+ * @fqname: name of the profile or namespace to remove  (NOT NULL)
+ * @size: size of the name
+ *
+ * Remove a profile or sub namespace from the current namespace, so that
+ * they can not be found anymore and mark them as replaced by unconfined
+ *
+ * NOTE: removing confinement does not restore rlimits to preconfinemnet values
+ *
+ * Returns: size of data consume else error code if fails
+ */
+ssize_t aa_remove_profiles(char *fqname, size_t size)
+{
+	struct aa_namespace *root, *ns = NULL;
+	struct aa_profile *profile = NULL;
+	const char *name = fqname, *info = NULL;
+	ssize_t error = 0;
+
+	if (*fqname == 0) {
+		info = "no profile specified";
+		error = -ENOENT;
+		goto fail;
+	}
+
+	root = aa_current_profile()->ns;
+
+	if (fqname[0] == ':') {
+		char *ns_name;
+		name = aa_split_fqname(fqname, &ns_name);
+		if (ns_name) {
+			/* released below */
+			ns = aa_find_namespace(root, ns_name);
+			if (!ns) {
+				info = "namespace does not exist";
+				error = -ENOENT;
+				goto fail;
+			}
+		}
+	} else
+		/* released below */
+		ns = aa_get_namespace(root);
+
+	write_lock(&ns->lock);
+	if (!name) {
+		/* remove namespace - can only happen if fqname[0] == ':' */
+		__remove_namespace(ns);
+	} else {
+		/* remove profile */
+		profile = aa_get_profile(__lookup_profile(&ns->base, name));
+		if (!profile) {
+			error = -ENOENT;
+			info = "profile does not exist";
+			goto fail_ns_lock;
+		}
+		name = profile->base.hname;
+		__remove_profile(profile);
+	}
+	write_unlock(&ns->lock);
+
+	/* don't fail removal if audit fails */
+	(void) audit_policy(OP_PROF_RM, GFP_KERNEL, name, info, error);
+	aa_put_namespace(ns);
+	aa_put_profile(profile);
+	return size;
+
+fail_ns_lock:
+	write_unlock(&ns->lock);
+	aa_put_namespace(ns);
+
+fail:
+	(void) audit_policy(OP_PROF_RM, GFP_KERNEL, name, info, error);
+	return error;
+}
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
new file mode 100644
index 0000000..eb3700e
--- /dev/null
+++ b/security/apparmor/policy_unpack.c
@@ -0,0 +1,703 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor functions for unpacking policy loaded from
+ * userspace.
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ * AppArmor uses a serialized binary format for loading policy.
+ * To find policy format documentation look in Documentation/apparmor.txt
+ * All policy is validated before it is used.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+
+#include "include/apparmor.h"
+#include "include/audit.h"
+#include "include/context.h"
+#include "include/match.h"
+#include "include/policy.h"
+#include "include/policy_unpack.h"
+#include "include/sid.h"
+
+/*
+ * The AppArmor interface treats data as a type byte followed by the
+ * actual data.  The interface has the notion of a a named entry
+ * which has a name (AA_NAME typecode followed by name string) followed by
+ * the entries typecode and data.  Named types allow for optional
+ * elements and extensions to be added and tested for without breaking
+ * backwards compatibility.
+ */
+
+enum aa_code {
+	AA_U8,
+	AA_U16,
+	AA_U32,
+	AA_U64,
+	AA_NAME,		/* same as string except it is items name */
+	AA_STRING,
+	AA_BLOB,
+	AA_STRUCT,
+	AA_STRUCTEND,
+	AA_LIST,
+	AA_LISTEND,
+	AA_ARRAY,
+	AA_ARRAYEND,
+};
+
+/*
+ * aa_ext is the read of the buffer containing the serialized profile.  The
+ * data is copied into a kernel buffer in apparmorfs and then handed off to
+ * the unpack routines.
+ */
+struct aa_ext {
+	void *start;
+	void *end;
+	void *pos;		/* pointer to current position in the buffer */
+	u32 version;
+};
+
+/* audit callback for unpack fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+	if (sa->aad.iface.target) {
+		struct aa_profile *name = sa->aad.iface.target;
+		audit_log_format(ab, " name=");
+		audit_log_untrustedstring(ab, name->base.hname);
+	}
+	if (sa->aad.iface.pos)
+		audit_log_format(ab, " offset=%ld", sa->aad.iface.pos);
+}
+
+/**
+ * audit_iface - do audit message for policy unpacking/load/replace/remove
+ * @new: profile if it has been allocated (MAYBE NULL)
+ * @name: name of the profile being manipulated (MAYBE NULL)
+ * @info: any extra info about the failure (MAYBE NULL)
+ * @e: buffer position info (NOT NULL)
+ * @error: error code
+ *
+ * Returns: %0 or error
+ */
+static int audit_iface(struct aa_profile *new, const char *name,
+		       const char *info, struct aa_ext *e, int error)
+{
+	struct aa_profile *profile = __aa_current_profile();
+	struct common_audit_data sa;
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.iface.pos = e->pos - e->start;
+	sa.aad.iface.target = new;
+	sa.aad.name = name;
+	sa.aad.info = info;
+	sa.aad.error = error;
+
+	return aa_audit(AUDIT_APPARMOR_STATUS, profile, GFP_KERNEL, &sa,
+			audit_cb);
+}
+
+/* test if read will be in packed data bounds */
+static bool inbounds(struct aa_ext *e, size_t size)
+{
+	return (size <= e->end - e->pos);
+}
+
+/**
+ * aa_u16_chunck - test and do bounds checking for a u16 size based chunk
+ * @e: serialized data read head (NOT NULL)
+ * @chunk: start address for chunk of data (NOT NULL)
+ *
+ * Returns: the size of chunk found with the read head at the end of the chunk.
+ */
+static size_t unpack_u16_chunk(struct aa_ext *e, char **chunk)
+{
+	size_t size = 0;
+
+	if (!inbounds(e, sizeof(u16)))
+		return 0;
+	size = le16_to_cpu(get_unaligned((u16 *) e->pos));
+	e->pos += sizeof(u16);
+	if (!inbounds(e, size))
+		return 0;
+	*chunk = e->pos;
+	e->pos += size;
+	return size;
+}
+
+/* unpack control byte */
+static bool unpack_X(struct aa_ext *e, enum aa_code code)
+{
+	if (!inbounds(e, 1))
+		return 0;
+	if (*(u8 *) e->pos != code)
+		return 0;
+	e->pos++;
+	return 1;
+}
+
+/**
+ * unpack_nameX - check is the next element is of type X with a name of @name
+ * @e: serialized data extent information  (NOT NULL)
+ * @code: type code
+ * @name: name to match to the serialized element.  (MAYBE NULL)
+ *
+ * check that the next serialized data element is of type X and has a tag
+ * name @name.  If @name is specified then there must be a matching
+ * name element in the stream.  If @name is NULL any name element will be
+ * skipped and only the typecode will be tested.
+ *
+ * Returns 1 on success (both type code and name tests match) and the read
+ * head is advanced past the headers
+ *
+ * Returns: 0 if either match fails, the read head does not move
+ */
+static bool unpack_nameX(struct aa_ext *e, enum aa_code code, const char *name)
+{
+	/*
+	 * May need to reset pos if name or type doesn't match
+	 */
+	void *pos = e->pos;
+	/*
+	 * Check for presence of a tagname, and if present name size
+	 * AA_NAME tag value is a u16.
+	 */
+	if (unpack_X(e, AA_NAME)) {
+		char *tag = NULL;
+		size_t size = unpack_u16_chunk(e, &tag);
+		/* if a name is specified it must match. otherwise skip tag */
+		if (name && (!size || strcmp(name, tag)))
+			goto fail;
+	} else if (name) {
+		/* if a name is specified and there is no name tag fail */
+		goto fail;
+	}
+
+	/* now check if type code matches */
+	if (unpack_X(e, code))
+		return 1;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+static bool unpack_u32(struct aa_ext *e, u32 *data, const char *name)
+{
+	if (unpack_nameX(e, AA_U32, name)) {
+		if (!inbounds(e, sizeof(u32)))
+			return 0;
+		if (data)
+			*data = le32_to_cpu(get_unaligned((u32 *) e->pos));
+		e->pos += sizeof(u32);
+		return 1;
+	}
+	return 0;
+}
+
+static bool unpack_u64(struct aa_ext *e, u64 *data, const char *name)
+{
+	if (unpack_nameX(e, AA_U64, name)) {
+		if (!inbounds(e, sizeof(u64)))
+			return 0;
+		if (data)
+			*data = le64_to_cpu(get_unaligned((u64 *) e->pos));
+		e->pos += sizeof(u64);
+		return 1;
+	}
+	return 0;
+}
+
+static size_t unpack_array(struct aa_ext *e, const char *name)
+{
+	if (unpack_nameX(e, AA_ARRAY, name)) {
+		int size;
+		if (!inbounds(e, sizeof(u16)))
+			return 0;
+		size = (int)le16_to_cpu(get_unaligned((u16 *) e->pos));
+		e->pos += sizeof(u16);
+		return size;
+	}
+	return 0;
+}
+
+static size_t unpack_blob(struct aa_ext *e, char **blob, const char *name)
+{
+	if (unpack_nameX(e, AA_BLOB, name)) {
+		u32 size;
+		if (!inbounds(e, sizeof(u32)))
+			return 0;
+		size = le32_to_cpu(get_unaligned((u32 *) e->pos));
+		e->pos += sizeof(u32);
+		if (inbounds(e, (size_t) size)) {
+			*blob = e->pos;
+			e->pos += size;
+			return size;
+		}
+	}
+	return 0;
+}
+
+static int unpack_str(struct aa_ext *e, const char **string, const char *name)
+{
+	char *src_str;
+	size_t size = 0;
+	void *pos = e->pos;
+	*string = NULL;
+	if (unpack_nameX(e, AA_STRING, name)) {
+		size = unpack_u16_chunk(e, &src_str);
+		if (size) {
+			/* strings are null terminated, length is size - 1 */
+			if (src_str[size - 1] != 0)
+				goto fail;
+			*string = src_str;
+		}
+	}
+	return size;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+static int unpack_strdup(struct aa_ext *e, char **string, const char *name)
+{
+	const char *tmp;
+	void *pos = e->pos;
+	int res = unpack_str(e, &tmp, name);
+	*string = NULL;
+
+	if (!res)
+		return 0;
+
+	*string = kmemdup(tmp, res, GFP_KERNEL);
+	if (!*string) {
+		e->pos = pos;
+		return 0;
+	}
+
+	return res;
+}
+
+/**
+ * verify_accept - verify the accept tables of a dfa
+ * @dfa: dfa to verify accept tables of (NOT NULL)
+ * @flags: flags governing dfa
+ *
+ * Returns: 1 if valid accept tables else 0 if error
+ */
+static bool verify_accept(struct aa_dfa *dfa, int flags)
+{
+	int i;
+
+	/* verify accept permissions */
+	for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) {
+		int mode = ACCEPT_TABLE(dfa)[i];
+
+		if (mode & ~DFA_VALID_PERM_MASK)
+			return 0;
+
+		if (ACCEPT_TABLE2(dfa)[i] & ~DFA_VALID_PERM2_MASK)
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * unpack_dfa - unpack a file rule dfa
+ * @e: serialized data extent information (NOT NULL)
+ *
+ * returns dfa or ERR_PTR or NULL if no dfa
+ */
+static struct aa_dfa *unpack_dfa(struct aa_ext *e)
+{
+	char *blob = NULL;
+	size_t size;
+	struct aa_dfa *dfa = NULL;
+
+	size = unpack_blob(e, &blob, "aadfa");
+	if (size) {
+		/*
+		 * The dfa is aligned with in the blob to 8 bytes
+		 * from the beginning of the stream.
+		 */
+		size_t sz = blob - (char *)e->start;
+		size_t pad = ALIGN(sz, 8) - sz;
+		int flags = TO_ACCEPT1_FLAG(YYTD_DATA32) |
+			TO_ACCEPT2_FLAG(YYTD_DATA32);
+
+
+		if (aa_g_paranoid_load)
+			flags |= DFA_FLAG_VERIFY_STATES;
+
+		dfa = aa_dfa_unpack(blob + pad, size - pad, flags);
+
+		if (IS_ERR(dfa))
+			return dfa;
+
+		if (!verify_accept(dfa, flags))
+			goto fail;
+	}
+
+	return dfa;
+
+fail:
+	aa_put_dfa(dfa);
+	return ERR_PTR(-EPROTO);
+}
+
+/**
+ * unpack_trans_table - unpack a profile transition table
+ * @e: serialized data extent information  (NOT NULL)
+ * @profile: profile to add the accept table to (NOT NULL)
+ *
+ * Returns: 1 if table succesfully unpacked
+ */
+static bool unpack_trans_table(struct aa_ext *e, struct aa_profile *profile)
+{
+	void *pos = e->pos;
+
+	/* exec table is optional */
+	if (unpack_nameX(e, AA_STRUCT, "xtable")) {
+		int i, size;
+
+		size = unpack_array(e, NULL);
+		/* currently 4 exec bits and entries 0-3 are reserved iupcx */
+		if (size > 16 - 4)
+			goto fail;
+		profile->file.trans.table = kzalloc(sizeof(char *) * size,
+						    GFP_KERNEL);
+		if (!profile->file.trans.table)
+			goto fail;
+
+		profile->file.trans.size = size;
+		for (i = 0; i < size; i++) {
+			char *str;
+			int c, j, size = unpack_strdup(e, &str, NULL);
+			/* unpack_strdup verifies that the last character is
+			 * null termination byte.
+			 */
+			if (!size)
+				goto fail;
+			profile->file.trans.table[i] = str;
+			/* verify that name doesn't start with space */
+			if (isspace(*str))
+				goto fail;
+
+			/* count internal #  of internal \0 */
+			for (c = j = 0; j < size - 2; j++) {
+				if (!str[j])
+					c++;
+			}
+			if (*str == ':') {
+				/* beginning with : requires an embedded \0,
+				 * verify that exactly 1 internal \0 exists
+				 * trailing \0 already verified by unpack_strdup
+				 */
+				if (c != 1)
+					goto fail;
+				/* first character after : must be valid */
+				if (!str[1])
+					goto fail;
+			} else if (c)
+				/* fail - all other cases with embedded \0 */
+				goto fail;
+		}
+		if (!unpack_nameX(e, AA_ARRAYEND, NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+	return 1;
+
+fail:
+	aa_free_domain_entries(&profile->file.trans);
+	e->pos = pos;
+	return 0;
+}
+
+static bool unpack_rlimits(struct aa_ext *e, struct aa_profile *profile)
+{
+	void *pos = e->pos;
+
+	/* rlimits are optional */
+	if (unpack_nameX(e, AA_STRUCT, "rlimits")) {
+		int i, size;
+		u32 tmp = 0;
+		if (!unpack_u32(e, &tmp, NULL))
+			goto fail;
+		profile->rlimits.mask = tmp;
+
+		size = unpack_array(e, NULL);
+		if (size > RLIM_NLIMITS)
+			goto fail;
+		for (i = 0; i < size; i++) {
+			u64 tmp = 0;
+			int a = aa_map_resource(i);
+			if (!unpack_u64(e, &tmp, NULL))
+				goto fail;
+			profile->rlimits.limits[a].rlim_max = tmp;
+		}
+		if (!unpack_nameX(e, AA_ARRAYEND, NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+	return 1;
+
+fail:
+	e->pos = pos;
+	return 0;
+}
+
+/**
+ * unpack_profile - unpack a serialized profile
+ * @e: serialized data extent information (NOT NULL)
+ *
+ * NOTE: unpack profile sets audit struct if there is a failure
+ */
+static struct aa_profile *unpack_profile(struct aa_ext *e)
+{
+	struct aa_profile *profile = NULL;
+	const char *name = NULL;
+	int error = -EPROTO;
+	kernel_cap_t tmpcap;
+	u32 tmp;
+
+	/* check that we have the right struct being passed */
+	if (!unpack_nameX(e, AA_STRUCT, "profile"))
+		goto fail;
+	if (!unpack_str(e, &name, NULL))
+		goto fail;
+
+	profile = aa_alloc_profile(name);
+	if (!profile)
+		return ERR_PTR(-ENOMEM);
+
+	/* profile renaming is optional */
+	(void) unpack_str(e, &profile->rename, "rename");
+
+	/* xmatch is optional and may be NULL */
+	profile->xmatch = unpack_dfa(e);
+	if (IS_ERR(profile->xmatch)) {
+		error = PTR_ERR(profile->xmatch);
+		profile->xmatch = NULL;
+		goto fail;
+	}
+	/* xmatch_len is not optional if xmatch is set */
+	if (profile->xmatch) {
+		if (!unpack_u32(e, &tmp, NULL))
+			goto fail;
+		profile->xmatch_len = tmp;
+	}
+
+	/* per profile debug flags (complain, audit) */
+	if (!unpack_nameX(e, AA_STRUCT, "flags"))
+		goto fail;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->flags |= PFLAG_HAT;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->mode = APPARMOR_COMPLAIN;
+	if (!unpack_u32(e, &tmp, NULL))
+		goto fail;
+	if (tmp)
+		profile->audit = AUDIT_ALL;
+
+	if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+		goto fail;
+
+	/* path_flags is optional */
+	if (unpack_u32(e, &profile->path_flags, "path_flags"))
+		profile->path_flags |= profile->flags & PFLAG_MEDIATE_DELETED;
+	else
+		/* set a default value if path_flags field is not present */
+		profile->path_flags = PFLAG_MEDIATE_DELETED;
+
+	if (!unpack_u32(e, &(profile->caps.allow.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &(profile->caps.audit.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &(profile->caps.quiet.cap[0]), NULL))
+		goto fail;
+	if (!unpack_u32(e, &tmpcap.cap[0], NULL))
+		goto fail;
+
+	if (unpack_nameX(e, AA_STRUCT, "caps64")) {
+		/* optional upper half of 64 bit caps */
+		if (!unpack_u32(e, &(profile->caps.allow.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.audit.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.quiet.cap[1]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(tmpcap.cap[1]), NULL))
+			goto fail;
+		if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+			goto fail;
+	}
+
+	if (unpack_nameX(e, AA_STRUCT, "capsx")) {
+		/* optional extended caps mediation mask */
+		if (!unpack_u32(e, &(profile->caps.extended.cap[0]), NULL))
+			goto fail;
+		if (!unpack_u32(e, &(profile->caps.extended.cap[1]), NULL))
+			goto fail;
+	}
+
+	if (!unpack_rlimits(e, profile))
+		goto fail;
+
+	/* get file rules */
+	profile->file.dfa = unpack_dfa(e);
+	if (IS_ERR(profile->file.dfa)) {
+		error = PTR_ERR(profile->file.dfa);
+		profile->file.dfa = NULL;
+		goto fail;
+	}
+
+	if (!unpack_u32(e, &profile->file.start, "dfa_start"))
+		/* default start state */
+		profile->file.start = DFA_START;
+
+	if (!unpack_trans_table(e, profile))
+		goto fail;
+
+	if (!unpack_nameX(e, AA_STRUCTEND, NULL))
+		goto fail;
+
+	return profile;
+
+fail:
+	if (profile)
+		name = NULL;
+	else if (!name)
+		name = "unknown";
+	audit_iface(profile, name, "failed to unpack profile", e, error);
+	aa_put_profile(profile);
+
+	return ERR_PTR(error);
+}
+
+/**
+ * verify_head - unpack serialized stream header
+ * @e: serialized data read head (NOT NULL)
+ * @ns: Returns - namespace if one is specified else NULL (NOT NULL)
+ *
+ * Returns: error or 0 if header is good
+ */
+static int verify_header(struct aa_ext *e, const char **ns)
+{
+	int error = -EPROTONOSUPPORT;
+	/* get the interface version */
+	if (!unpack_u32(e, &e->version, "version")) {
+		audit_iface(NULL, NULL, "invalid profile format", e, error);
+		return error;
+	}
+
+	/* check that the interface version is currently supported */
+	if (e->version != 5) {
+		audit_iface(NULL, NULL, "unsupported interface version", e,
+			    error);
+		return error;
+	}
+
+	/* read the namespace if present */
+	if (!unpack_str(e, ns, "namespace"))
+		*ns = NULL;
+
+	return 0;
+}
+
+static bool verify_xindex(int xindex, int table_size)
+{
+	int index, xtype;
+	xtype = xindex & AA_X_TYPE_MASK;
+	index = xindex & AA_X_INDEX_MASK;
+	if (xtype == AA_X_TABLE && index > table_size)
+		return 0;
+	return 1;
+}
+
+/* verify dfa xindexes are in range of transition tables */
+static bool verify_dfa_xindex(struct aa_dfa *dfa, int table_size)
+{
+	int i;
+	for (i = 0; i < dfa->tables[YYTD_ID_ACCEPT]->td_lolen; i++) {
+		if (!verify_xindex(dfa_user_xindex(dfa, i), table_size))
+			return 0;
+		if (!verify_xindex(dfa_other_xindex(dfa, i), table_size))
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * verify_profile - Do post unpack analysis to verify profile consistency
+ * @profile: profile to verify (NOT NULL)
+ *
+ * Returns: 0 if passes verification else error
+ */
+static int verify_profile(struct aa_profile *profile)
+{
+	if (aa_g_paranoid_load) {
+		if (profile->file.dfa &&
+		    !verify_dfa_xindex(profile->file.dfa,
+				       profile->file.trans.size)) {
+			audit_iface(profile, NULL, "Invalid named transition",
+				    NULL, -EPROTO);
+			return -EPROTO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * aa_unpack - unpack packed binary profile data loaded from user space
+ * @udata: user data copied to kmem  (NOT NULL)
+ * @size: the size of the user data
+ * @ns: Returns namespace profile is in if specified else NULL (NOT NULL)
+ *
+ * Unpack user data and return refcounted allocated profile or ERR_PTR
+ *
+ * Returns: profile else error pointer if fails to unpack
+ */
+struct aa_profile *aa_unpack(void *udata, size_t size, const char **ns)
+{
+	struct aa_profile *profile = NULL;
+	int error;
+	struct aa_ext e = {
+		.start = udata,
+		.end = udata + size,
+		.pos = udata,
+	};
+
+	error = verify_header(&e, ns);
+	if (error)
+		return ERR_PTR(error);
+
+	profile = unpack_profile(&e);
+	if (IS_ERR(profile))
+		return profile;
+
+	error = verify_profile(profile);
+	if (error) {
+		aa_put_profile(profile);
+		profile = ERR_PTR(error);
+	}
+
+	/* return refcount */
+	return profile;
+}
diff --git a/security/apparmor/procattr.c b/security/apparmor/procattr.c
new file mode 100644
index 0000000..04a2cf8
--- /dev/null
+++ b/security/apparmor/procattr.c
@@ -0,0 +1,170 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor /proc/<pid>/attr/ interface functions
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include "include/apparmor.h"
+#include "include/context.h"
+#include "include/policy.h"
+#include "include/domain.h"
+
+
+/**
+ * aa_getprocattr - Return the profile information for @profile
+ * @profile: the profile to print profile info about  (NOT NULL)
+ * @string: Returns - string containing the profile info (NOT NULL)
+ *
+ * Returns: length of @string on success else error on failure
+ *
+ * Requires: profile != NULL
+ *
+ * Creates a string containing the namespace_name://profile_name for
+ * @profile.
+ *
+ * Returns: size of string placed in @string else error code on failure
+ */
+int aa_getprocattr(struct aa_profile *profile, char **string)
+{
+	char *str;
+	int len = 0, mode_len = 0, ns_len = 0, name_len;
+	const char *mode_str = profile_mode_names[profile->mode];
+	const char *ns_name = NULL;
+	struct aa_namespace *ns = profile->ns;
+	struct aa_namespace *current_ns = __aa_current_profile()->ns;
+	char *s;
+
+	if (!aa_ns_visible(current_ns, ns))
+		return -EACCES;
+
+	ns_name = aa_ns_name(current_ns, ns);
+	ns_len = strlen(ns_name);
+
+	/* if the visible ns_name is > 0 increase size for : :// seperator */
+	if (ns_len)
+		ns_len += 4;
+
+	/* unconfined profiles don't have a mode string appended */
+	if (!unconfined(profile))
+		mode_len = strlen(mode_str) + 3;	/* + 3 for _() */
+
+	name_len = strlen(profile->base.hname);
+	len = mode_len + ns_len + name_len + 1;	    /* + 1 for \n */
+	s = str = kmalloc(len + 1, GFP_KERNEL);	    /* + 1 \0 */
+	if (!str)
+		return -ENOMEM;
+
+	if (ns_len) {
+		/* skip over prefix current_ns->base.hname and separating // */
+		sprintf(s, ":%s://", ns_name);
+		s += ns_len;
+	}
+	if (unconfined(profile))
+		/* mode string not being appended */
+		sprintf(s, "%s\n", profile->base.hname);
+	else
+		sprintf(s, "%s (%s)\n", profile->base.hname, mode_str);
+	*string = str;
+
+	/* NOTE: len does not include \0 of string, not saved as part of file */
+	return len;
+}
+
+/**
+ * split_token_from_name - separate a string of form  <token>^<name>
+ * @op: operation being checked
+ * @args: string to parse  (NOT NULL)
+ * @token: stores returned parsed token value  (NOT NULL)
+ *
+ * Returns: start position of name after token else NULL on failure
+ */
+static char *split_token_from_name(int op, char *args, u64 * token)
+{
+	char *name;
+
+	*token = simple_strtoull(args, &name, 16);
+	if ((name == args) || *name != '^') {
+		AA_ERROR("%s: Invalid input '%s'", op_table[op], args);
+		return ERR_PTR(-EINVAL);
+	}
+
+	name++;			/* skip ^ */
+	if (!*name)
+		name = NULL;
+	return name;
+}
+
+/**
+ * aa_setprocattr_chagnehat - handle procattr interface to change_hat
+ * @args: args received from writing to /proc/<pid>/attr/current (NOT NULL)
+ * @size: size of the args
+ * @test: true if this is a test of change_hat permissions
+ *
+ * Returns: %0 or error code if change_hat fails
+ */
+int aa_setprocattr_changehat(char *args, size_t size, int test)
+{
+	char *hat;
+	u64 token;
+	const char *hats[16];		/* current hard limit on # of names */
+	int count = 0;
+
+	hat = split_token_from_name(OP_CHANGE_HAT, args, &token);
+	if (IS_ERR(hat))
+		return PTR_ERR(hat);
+
+	if (!hat && !token) {
+		AA_ERROR("change_hat: Invalid input, NULL hat and NULL magic");
+		return -EINVAL;
+	}
+
+	if (hat) {
+		/* set up hat name vector, args guaranteed null terminated
+		 * at args[size] by setprocattr.
+		 *
+		 * If there are multiple hat names in the buffer each is
+		 * separated by a \0.  Ie. userspace writes them pre tokenized
+		 */
+		char *end = args + size;
+		for (count = 0; (hat < end) && count < 16; ++count) {
+			char *next = hat + strlen(hat) + 1;
+			hats[count] = hat;
+			hat = next;
+		}
+	}
+
+	AA_DEBUG("%s: Magic 0x%llx Hat '%s'\n",
+		 __func__, token, hat ? hat : NULL);
+
+	return aa_change_hat(hats, count, token, test);
+}
+
+/**
+ * aa_setprocattr_changeprofile - handle procattr interface to changeprofile
+ * @fqname: args received from writting to /proc/<pid>/attr/current (NOT NULL)
+ * @onexec: true if change_profile should be delayed until exec
+ * @test: true if this is a test of change_profile permissions
+ *
+ * Returns: %0 or error code if change_profile fails
+ */
+int aa_setprocattr_changeprofile(char *fqname, bool onexec, int test)
+{
+	char *name, *ns_name;
+
+	name = aa_split_fqname(fqname, &ns_name);
+	return aa_change_profile(ns_name, name, onexec, test);
+}
+
+int aa_setprocattr_permipc(char *fqname)
+{
+	/* TODO: add ipc permission querying */
+	return -ENOTSUPP;
+}
diff --git a/security/apparmor/resource.c b/security/apparmor/resource.c
new file mode 100644
index 0000000..4a368f1
--- /dev/null
+++ b/security/apparmor/resource.c
@@ -0,0 +1,134 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor resource mediation and attachment
+ *
+ * Copyright (C) 1998-2008 Novell/SUSE
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+
+#include <linux/audit.h>
+
+#include "include/audit.h"
+#include "include/resource.h"
+#include "include/policy.h"
+
+/*
+ * Table of rlimit names: we generate it from resource.h.
+ */
+#include "rlim_names.h"
+
+/* audit callback for resource specific fields */
+static void audit_cb(struct audit_buffer *ab, void *va)
+{
+	struct common_audit_data *sa = va;
+
+	audit_log_format(ab, " rlimit=%s value=%lu",
+			 rlim_names[sa->aad.rlim.rlim], sa->aad.rlim.max);
+}
+
+/**
+ * audit_resource - audit setting resource limit
+ * @profile: profile being enforced  (NOT NULL)
+ * @resoure: rlimit being auditing
+ * @value: value being set
+ * @error: error value
+ *
+ * Returns: 0 or sa->error else other error code on failure
+ */
+static int audit_resource(struct aa_profile *profile, unsigned int resource,
+			  unsigned long value, int error)
+{
+	struct common_audit_data sa;
+
+	COMMON_AUDIT_DATA_INIT(&sa, NONE);
+	sa.aad.op = OP_SETRLIMIT,
+	sa.aad.rlim.rlim = resource;
+	sa.aad.rlim.max = value;
+	sa.aad.error = error;
+	return aa_audit(AUDIT_APPARMOR_AUTO, profile, GFP_KERNEL, &sa,
+			audit_cb);
+}
+
+/**
+ * aa_map_resouce - map compiled policy resource to internal #
+ * @resource: flattened policy resource number
+ *
+ * Returns: resource # for the current architecture.
+ *
+ * rlimit resource can vary based on architecture, map the compiled policy
+ * resource # to the internal representation for the architecture.
+ */
+int aa_map_resource(int resource)
+{
+	return rlim_map[resource];
+}
+
+/**
+ * aa_task_setrlimit - test permission to set an rlimit
+ * @profile - profile confining the task  (NOT NULL)
+ * @resource - the resource being set
+ * @new_rlim - the new resource limit  (NOT NULL)
+ *
+ * Control raising the processes hard limit.
+ *
+ * Returns: 0 or error code if setting resource failed
+ */
+int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
+		      struct rlimit *new_rlim)
+{
+	int error = 0;
+
+	if (profile->rlimits.mask & (1 << resource) &&
+	    new_rlim->rlim_max > profile->rlimits.limits[resource].rlim_max)
+
+		error = audit_resource(profile, resource, new_rlim->rlim_max,
+			-EACCES);
+
+	return error;
+}
+
+/**
+ * __aa_transition_rlimits - apply new profile rlimits
+ * @old: old profile on task  (NOT NULL)
+ * @new: new profile with rlimits to apply  (NOT NULL)
+ */
+void __aa_transition_rlimits(struct aa_profile *old, struct aa_profile *new)
+{
+	unsigned int mask = 0;
+	struct rlimit *rlim, *initrlim;
+	int i;
+
+	/* for any rlimits the profile controlled reset the soft limit
+	 * to the less of the tasks hard limit and the init tasks soft limit
+	 */
+	if (old->rlimits.mask) {
+		for (i = 0, mask = 1; i < RLIM_NLIMITS; i++, mask <<= 1) {
+			if (old->rlimits.mask & mask) {
+				rlim = current->signal->rlim + i;
+				initrlim = init_task.signal->rlim + i;
+				rlim->rlim_cur = min(rlim->rlim_max,
+						     initrlim->rlim_cur);
+			}
+		}
+	}
+
+	/* set any new hard limits as dictated by the new profile */
+	if (!new->rlimits.mask)
+		return;
+	for (i = 0, mask = 1; i < RLIM_NLIMITS; i++, mask <<= 1) {
+		if (!(new->rlimits.mask & mask))
+			continue;
+
+		rlim = current->signal->rlim + i;
+		rlim->rlim_max = min(rlim->rlim_max,
+				     new->rlimits.limits[i].rlim_max);
+		/* soft limit should not exceed hard limit */
+		rlim->rlim_cur = min(rlim->rlim_cur, rlim->rlim_max);
+	}
+}
diff --git a/security/apparmor/sid.c b/security/apparmor/sid.c
new file mode 100644
index 0000000..f0b34f7
--- /dev/null
+++ b/security/apparmor/sid.c
@@ -0,0 +1,55 @@
+/*
+ * AppArmor security module
+ *
+ * This file contains AppArmor security identifier (sid) manipulation fns
+ *
+ * Copyright 2009-2010 Canonical Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ *
+ * AppArmor allocates a unique sid for every profile loaded.  If a profile
+ * is replaced it receives the sid of the profile it is replacing.
+ *
+ * The sid value of 0 is invalid.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include "include/sid.h"
+
+/* global counter from which sids are allocated */
+static u32 global_sid;
+static DEFINE_SPINLOCK(sid_lock);
+
+/* TODO FIXME: add sid to profile mapping, and sid recycling */
+
+/**
+ * aa_alloc_sid - allocate a new sid for a profile
+ */
+u32 aa_alloc_sid(void)
+{
+	u32 sid;
+
+	/*
+	 * TODO FIXME: sid recycling - part of profile mapping table
+	 */
+	spin_lock(&sid_lock);
+	sid = (++global_sid);
+	spin_unlock(&sid_lock);
+	return sid;
+}
+
+/**
+ * aa_free_sid - free a sid
+ * @sid: sid to free
+ */
+void aa_free_sid(u32 sid)
+{
+	;			/* NOP ATM */
+}
diff --git a/security/capability.c b/security/capability.c
index 8168e3e..a0bbf30 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -27,7 +27,7 @@
 	return 0;
 }
 
-static int cap_bprm_check_security (struct linux_binprm *bprm)
+static int cap_bprm_check_security(struct linux_binprm *bprm)
 {
 	return 0;
 }
@@ -268,8 +268,7 @@
 	return 0;
 }
 
-static int cap_path_truncate(struct path *path, loff_t length,
-			     unsigned int time_attrs)
+static int cap_path_truncate(struct path *path)
 {
 	return 0;
 }
diff --git a/security/inode.c b/security/inode.c
index 1c812e8..8c777f0 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -86,7 +86,7 @@
 			 int mode, dev_t dev)
 {
 	struct inode *inode;
-	int error = -EPERM;
+	int error = -ENOMEM;
 
 	if (dentry->d_inode)
 		return -EEXIST;
@@ -166,6 +166,8 @@
 			error = mkdir(parent->d_inode, *dentry, mode);
 		else
 			error = create(parent->d_inode, *dentry, mode);
+		if (error)
+			dput(*dentry);
 	} else
 		error = PTR_ERR(*dentry);
 	mutex_unlock(&parent->d_inode->i_mutex);
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 8fe736a..ef21b96 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -45,7 +45,8 @@
 }
 
 static const struct file_operations ima_htable_violations_ops = {
-	.read = ima_show_htable_violations
+	.read = ima_show_htable_violations,
+	.llseek = generic_file_llseek,
 };
 
 static ssize_t ima_show_measurements_count(struct file *filp,
@@ -57,7 +58,8 @@
 }
 
 static const struct file_operations ima_measurements_count_ops = {
-	.read = ima_show_measurements_count
+	.read = ima_show_measurements_count,
+	.llseek = generic_file_llseek,
 };
 
 /* returns pointer to hlist_node */
@@ -319,7 +321,8 @@
 static const struct file_operations ima_measure_policy_ops = {
 	.open = ima_open_policy,
 	.write = ima_write_policy,
-	.release = ima_release_policy
+	.release = ima_release_policy,
+	.llseek = generic_file_llseek,
 };
 
 int __init ima_fs_init(void)
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 38783dc..addb67b 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -114,6 +114,10 @@
 				    const void *description,
 				    key_match_func_t match);
 
+extern key_ref_t search_my_process_keyrings(struct key_type *type,
+					    const void *description,
+					    key_match_func_t match,
+					    const struct cred *cred);
 extern key_ref_t search_process_keyrings(struct key_type *type,
 					 const void *description,
 					 key_match_func_t match,
@@ -134,6 +138,7 @@
 					struct key *dest_keyring,
 					unsigned long flags);
 
+extern int lookup_user_key_possessed(const struct key *key, const void *target);
 extern key_ref_t lookup_user_key(key_serial_t id, unsigned long flags,
 				 key_perm_t perm);
 #define KEY_LOOKUP_CREATE	0x01
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 13074b4..b2b0998 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -33,7 +33,7 @@
 	ret = strncpy_from_user(type, _type, len);
 
 	if (ret < 0)
-		return -EFAULT;
+		return ret;
 
 	if (ret == 0 || ret >= len)
 		return -EINVAL;
@@ -505,13 +505,11 @@
 
 	ret = snprintf(tmpbuf, PAGE_SIZE - 1,
 		       "%s;%d;%d;%08x;%s",
-		       key_ref_to_ptr(key_ref)->type->name,
-		       key_ref_to_ptr(key_ref)->uid,
-		       key_ref_to_ptr(key_ref)->gid,
-		       key_ref_to_ptr(key_ref)->perm,
-		       key_ref_to_ptr(key_ref)->description ?
-		       key_ref_to_ptr(key_ref)->description : ""
-		       );
+		       key->type->name,
+		       key->uid,
+		       key->gid,
+		       key->perm,
+		       key->description ?: "");
 
 	/* include a NUL char at the end of the data */
 	if (ret > PAGE_SIZE - 1)
@@ -1080,7 +1078,7 @@
 	return old_setting;
 error:
 	abort_creds(new);
-	return -EINVAL;
+	return ret;
 
 } /* end keyctl_set_reqkey_keyring() */
 
@@ -1091,7 +1089,7 @@
 long keyctl_set_timeout(key_serial_t id, unsigned timeout)
 {
 	struct timespec now;
-	struct key *key;
+	struct key *key, *instkey;
 	key_ref_t key_ref;
 	time_t expiry;
 	long ret;
@@ -1099,10 +1097,25 @@
 	key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
 				  KEY_SETATTR);
 	if (IS_ERR(key_ref)) {
+		/* setting the timeout on a key under construction is permitted
+		 * if we have the authorisation token handy */
+		if (PTR_ERR(key_ref) == -EACCES) {
+			instkey = key_get_instantiation_authkey(id);
+			if (!IS_ERR(instkey)) {
+				key_put(instkey);
+				key_ref = lookup_user_key(id,
+							  KEY_LOOKUP_PARTIAL,
+							  0);
+				if (!IS_ERR(key_ref))
+					goto okay;
+			}
+		}
+
 		ret = PTR_ERR(key_ref);
 		goto error;
 	}
 
+okay:
 	key = key_ref_to_ptr(key_ref);
 
 	/* make the changes with the locks held to prevent races */
diff --git a/security/keys/proc.c b/security/keys/proc.c
index 068b66e..70373966 100644
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -184,20 +184,36 @@
 
 static int proc_keys_show(struct seq_file *m, void *v)
 {
+	const struct cred *cred = current_cred();
 	struct rb_node *_p = v;
 	struct key *key = rb_entry(_p, struct key, serial_node);
 	struct timespec now;
 	unsigned long timo;
+	key_ref_t key_ref, skey_ref;
 	char xbuf[12];
 	int rc;
 
+	key_ref = make_key_ref(key, 0);
+
+	/* determine if the key is possessed by this process (a test we can
+	 * skip if the key does not indicate the possessor can view it
+	 */
+	if (key->perm & KEY_POS_VIEW) {
+		skey_ref = search_my_process_keyrings(key->type, key,
+						      lookup_user_key_possessed,
+						      cred);
+		if (!IS_ERR(skey_ref)) {
+			key_ref_put(skey_ref);
+			key_ref = make_key_ref(key, 1);
+		}
+	}
+
 	/* check whether the current task is allowed to view the key (assuming
 	 * non-possession)
 	 * - the caller holds a spinlock, and thus the RCU read lock, making our
 	 *   access to __current_cred() safe
 	 */
-	rc = key_task_permission(make_key_ref(key, 0), current_cred(),
-				 KEY_VIEW);
+	rc = key_task_permission(key_ref, cred, KEY_VIEW);
 	if (rc < 0)
 		return 0;
 
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 6b8e4ff..f8e7251 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -309,22 +309,19 @@
 
 /*****************************************************************************/
 /*
- * search the process keyrings for the first matching key
+ * search only my process keyrings for the first matching key
  * - we use the supplied match function to see if the description (or other
  *   feature of interest) matches
  * - we return -EAGAIN if we didn't find any matching key
  * - we return -ENOKEY if we found only negative matching keys
  */
-key_ref_t search_process_keyrings(struct key_type *type,
-				  const void *description,
-				  key_match_func_t match,
-				  const struct cred *cred)
+key_ref_t search_my_process_keyrings(struct key_type *type,
+				     const void *description,
+				     key_match_func_t match,
+				     const struct cred *cred)
 {
-	struct request_key_auth *rka;
 	key_ref_t key_ref, ret, err;
 
-	might_sleep();
-
 	/* we want to return -EAGAIN or -ENOKEY if any of the keyrings were
 	 * searchable, but we failed to find a key or we found a negative key;
 	 * otherwise we want to return a sample error (probably -EACCES) if
@@ -424,6 +421,36 @@
 		}
 	}
 
+	/* no key - decide on the error we're going to go for */
+	key_ref = ret ? ret : err;
+
+found:
+	return key_ref;
+}
+
+/*****************************************************************************/
+/*
+ * search the process keyrings for the first matching key
+ * - we use the supplied match function to see if the description (or other
+ *   feature of interest) matches
+ * - we return -EAGAIN if we didn't find any matching key
+ * - we return -ENOKEY if we found only negative matching keys
+ */
+key_ref_t search_process_keyrings(struct key_type *type,
+				  const void *description,
+				  key_match_func_t match,
+				  const struct cred *cred)
+{
+	struct request_key_auth *rka;
+	key_ref_t key_ref, ret = ERR_PTR(-EACCES), err;
+
+	might_sleep();
+
+	key_ref = search_my_process_keyrings(type, description, match, cred);
+	if (!IS_ERR(key_ref))
+		goto found;
+	err = key_ref;
+
 	/* if this process has an instantiation authorisation key, then we also
 	 * search the keyrings of the process mentioned there
 	 * - we don't permit access to request_key auth keys via this method
@@ -446,24 +473,19 @@
 			if (!IS_ERR(key_ref))
 				goto found;
 
-			switch (PTR_ERR(key_ref)) {
-			case -EAGAIN: /* no key */
-				if (ret)
-					break;
-			case -ENOKEY: /* negative key */
-				ret = key_ref;
-				break;
-			default:
-				err = key_ref;
-				break;
-			}
+			ret = key_ref;
 		} else {
 			up_read(&cred->request_key_auth->sem);
 		}
 	}
 
 	/* no key - decide on the error we're going to go for */
-	key_ref = ret ? ret : err;
+	if (err == ERR_PTR(-ENOKEY) || ret == ERR_PTR(-ENOKEY))
+		key_ref = ERR_PTR(-ENOKEY);
+	else if (err == ERR_PTR(-EACCES))
+		key_ref = ret;
+	else
+		key_ref = err;
 
 found:
 	return key_ref;
@@ -474,7 +496,7 @@
 /*
  * see if the key we're looking at is the target key
  */
-static int lookup_user_key_possessed(const struct key *key, const void *target)
+int lookup_user_key_possessed(const struct key *key, const void *target)
 {
 	return key == target;
 
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index f5ec9ac..0d26f68 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -144,6 +144,7 @@
 	prkey = 0;
 	if (cred->tgcred->process_keyring)
 		prkey = cred->tgcred->process_keyring->serial;
+	sprintf(keyring_str[1], "%d", prkey);
 
 	rcu_read_lock();
 	session = rcu_dereference(cred->tgcred->session_keyring);
diff --git a/security/security.c b/security/security.c
index 351942a..e8c87b8 100644
--- a/security/security.c
+++ b/security/security.c
@@ -417,12 +417,11 @@
 					 new_dentry);
 }
 
-int security_path_truncate(struct path *path, loff_t length,
-			   unsigned int time_attrs)
+int security_path_truncate(struct path *path)
 {
 	if (unlikely(IS_PRIVATE(path->dentry->d_inode)))
 		return 0;
-	return security_ops->path_truncate(path, length, time_attrs);
+	return security_ops->path_truncate(path);
 }
 
 int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 7f1a304..9da6420 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -288,7 +288,6 @@
 	if (!node)
 		goto out;
 
-	INIT_RCU_HEAD(&node->rhead);
 	INIT_HLIST_NODE(&node->list);
 	avc_cache_stats_incr(allocations);
 
@@ -489,9 +488,29 @@
 	struct common_audit_data stack_data;
 	u32 denied, audited;
 	denied = requested & ~avd->allowed;
-	if (denied)
+	if (denied) {
 		audited = denied & avd->auditdeny;
-	else if (result)
+		/*
+		 * a->selinux_audit_data.auditdeny is TRICKY!  Setting a bit in
+		 * this field means that ANY denials should NOT be audited if
+		 * the policy contains an explicit dontaudit rule for that
+		 * permission.  Take notice that this is unrelated to the
+		 * actual permissions that were denied.  As an example lets
+		 * assume:
+		 *
+		 * denied == READ
+		 * avd.auditdeny & ACCESS == 0 (not set means explicit rule)
+		 * selinux_audit_data.auditdeny & ACCESS == 1
+		 *
+		 * We will NOT audit the denial even though the denied
+		 * permission was READ and the auditdeny checks were for
+		 * ACCESS
+		 */
+		if (a &&
+		    a->selinux_audit_data.auditdeny &&
+		    !(a->selinux_audit_data.auditdeny & avd->auditdeny))
+			audited = 0;
+	} else if (result)
 		audited = denied = requested;
 	else
 		audited = requested & avd->auditallow;
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 5c9f25b..9b40f4c 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -87,9 +87,6 @@
 #include "netlabel.h"
 #include "audit.h"
 
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
 #define NUM_SEL_MNT_OPTS 5
 
 extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm);
@@ -188,7 +185,7 @@
  */
 static inline u32 current_sid(void)
 {
-	const struct task_security_struct *tsec = current_cred()->security;
+	const struct task_security_struct *tsec = current_security();
 
 	return tsec->sid;
 }
@@ -279,32 +276,6 @@
 	kfree(sbsec);
 }
 
-static int sk_alloc_security(struct sock *sk, int family, gfp_t priority)
-{
-	struct sk_security_struct *sksec;
-
-	sksec = kzalloc(sizeof(*sksec), priority);
-	if (!sksec)
-		return -ENOMEM;
-
-	sksec->peer_sid = SECINITSID_UNLABELED;
-	sksec->sid = SECINITSID_UNLABELED;
-	sk->sk_security = sksec;
-
-	selinux_netlbl_sk_security_reset(sksec);
-
-	return 0;
-}
-
-static void sk_free_security(struct sock *sk)
-{
-	struct sk_security_struct *sksec = sk->sk_security;
-
-	sk->sk_security = NULL;
-	selinux_netlbl_sk_security_free(sksec);
-	kfree(sksec);
-}
-
 /* The security server must be initialized before
    any labeling or access decisions can be provided. */
 extern int ss_initialized;
@@ -1584,8 +1555,7 @@
 		      struct dentry *dentry,
 		      u16 tclass)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	struct inode_security_struct *dsec;
 	struct superblock_security_struct *sbsec;
 	u32 sid, newsid;
@@ -1806,27 +1776,9 @@
 {
 	u32 av = file_to_av(file);
 
-	if (selinux_policycap_openperm) {
-		mode_t mode = file->f_path.dentry->d_inode->i_mode;
-		/*
-		 * lnk files and socks do not really have an 'open'
-		 */
-		if (S_ISREG(mode))
-			av |= FILE__OPEN;
-		else if (S_ISCHR(mode))
-			av |= CHR_FILE__OPEN;
-		else if (S_ISBLK(mode))
-			av |= BLK_FILE__OPEN;
-		else if (S_ISFIFO(mode))
-			av |= FIFO_FILE__OPEN;
-		else if (S_ISDIR(mode))
-			av |= DIR__OPEN;
-		else if (S_ISSOCK(mode))
-			av |= SOCK_FILE__OPEN;
-		else
-			printk(KERN_ERR "SELinux: WARNING: inside %s with "
-				"unknown mode:%o\n", __func__, mode);
-	}
+	if (selinux_policycap_openperm)
+		av |= FILE__OPEN;
+
 	return av;
 }
 
@@ -2183,8 +2135,7 @@
 
 static int selinux_bprm_secureexec(struct linux_binprm *bprm)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	u32 sid, osid;
 	int atsecure = 0;
 
@@ -2559,8 +2510,7 @@
 				       char **name, void **value,
 				       size_t *len)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
+	const struct task_security_struct *tsec = current_security();
 	struct inode_security_struct *dsec;
 	struct superblock_security_struct *sbsec;
 	u32 sid, newsid, clen;
@@ -2676,14 +2626,26 @@
 static int selinux_inode_permission(struct inode *inode, int mask)
 {
 	const struct cred *cred = current_cred();
+	struct common_audit_data ad;
+	u32 perms;
+	bool from_access;
 
-	if (!mask) {
-		/* No permission to check.  Existence test. */
+	from_access = mask & MAY_ACCESS;
+	mask &= (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND);
+
+	/* No permission to check.  Existence test. */
+	if (!mask)
 		return 0;
-	}
 
-	return inode_has_perm(cred, inode,
-			      file_mask_to_av(inode->i_mode, mask), NULL);
+	COMMON_AUDIT_DATA_INIT(&ad, FS);
+	ad.u.fs.inode = inode;
+
+	if (from_access)
+		ad.selinux_audit_data.auditdeny |= FILE__AUDIT_ACCESS;
+
+	perms = file_mask_to_av(inode->i_mode, mask);
+
+	return inode_has_perm(cred, inode, perms, &ad);
 }
 
 static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
@@ -3671,71 +3633,54 @@
 }
 
 /* socket security operations */
-static int socket_has_perm(struct task_struct *task, struct socket *sock,
-			   u32 perms)
+
+static u32 socket_sockcreate_sid(const struct task_security_struct *tsec)
 {
-	struct inode_security_struct *isec;
+	return tsec->sockcreate_sid ? : tsec->sid;
+}
+
+static int sock_has_perm(struct task_struct *task, struct sock *sk, u32 perms)
+{
+	struct sk_security_struct *sksec = sk->sk_security;
 	struct common_audit_data ad;
-	u32 sid;
-	int err = 0;
+	u32 tsid = task_sid(task);
 
-	isec = SOCK_INODE(sock)->i_security;
-
-	if (isec->sid == SECINITSID_KERNEL)
-		goto out;
-	sid = task_sid(task);
+	if (sksec->sid == SECINITSID_KERNEL)
+		return 0;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
-	ad.u.net.sk = sock->sk;
-	err = avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
+	ad.u.net.sk = sk;
 
-out:
-	return err;
+	return avc_has_perm(tsid, sksec->sid, sksec->sclass, perms, &ad);
 }
 
 static int selinux_socket_create(int family, int type,
 				 int protocol, int kern)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
-	u32 sid, newsid;
+	const struct task_security_struct *tsec = current_security();
+	u32 newsid;
 	u16 secclass;
-	int err = 0;
 
 	if (kern)
-		goto out;
+		return 0;
 
-	sid = tsec->sid;
-	newsid = tsec->sockcreate_sid ?: sid;
-
+	newsid = socket_sockcreate_sid(tsec);
 	secclass = socket_type_to_security_class(family, type, protocol);
-	err = avc_has_perm(sid, newsid, secclass, SOCKET__CREATE, NULL);
-
-out:
-	return err;
+	return avc_has_perm(tsec->sid, newsid, secclass, SOCKET__CREATE, NULL);
 }
 
 static int selinux_socket_post_create(struct socket *sock, int family,
 				      int type, int protocol, int kern)
 {
-	const struct cred *cred = current_cred();
-	const struct task_security_struct *tsec = cred->security;
-	struct inode_security_struct *isec;
+	const struct task_security_struct *tsec = current_security();
+	struct inode_security_struct *isec = SOCK_INODE(sock)->i_security;
 	struct sk_security_struct *sksec;
-	u32 sid, newsid;
 	int err = 0;
 
-	sid = tsec->sid;
-	newsid = tsec->sockcreate_sid;
-
-	isec = SOCK_INODE(sock)->i_security;
-
 	if (kern)
 		isec->sid = SECINITSID_KERNEL;
-	else if (newsid)
-		isec->sid = newsid;
 	else
-		isec->sid = sid;
+		isec->sid = socket_sockcreate_sid(tsec);
 
 	isec->sclass = socket_type_to_security_class(family, type, protocol);
 	isec->initialized = 1;
@@ -3756,10 +3701,11 @@
 
 static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, int addrlen)
 {
+	struct sock *sk = sock->sk;
 	u16 family;
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__BIND);
+	err = sock_has_perm(current, sk, SOCKET__BIND);
 	if (err)
 		goto out;
 
@@ -3768,19 +3714,16 @@
 	 * Multiple address binding for SCTP is not supported yet: we just
 	 * check the first address now.
 	 */
-	family = sock->sk->sk_family;
+	family = sk->sk_family;
 	if (family == PF_INET || family == PF_INET6) {
 		char *addrp;
-		struct inode_security_struct *isec;
+		struct sk_security_struct *sksec = sk->sk_security;
 		struct common_audit_data ad;
 		struct sockaddr_in *addr4 = NULL;
 		struct sockaddr_in6 *addr6 = NULL;
 		unsigned short snum;
-		struct sock *sk = sock->sk;
 		u32 sid, node_perm;
 
-		isec = SOCK_INODE(sock)->i_security;
-
 		if (family == PF_INET) {
 			addr4 = (struct sockaddr_in *)address;
 			snum = ntohs(addr4->sin_port);
@@ -3804,15 +3747,15 @@
 				COMMON_AUDIT_DATA_INIT(&ad, NET);
 				ad.u.net.sport = htons(snum);
 				ad.u.net.family = family;
-				err = avc_has_perm(isec->sid, sid,
-						   isec->sclass,
+				err = avc_has_perm(sksec->sid, sid,
+						   sksec->sclass,
 						   SOCKET__NAME_BIND, &ad);
 				if (err)
 					goto out;
 			}
 		}
 
-		switch (isec->sclass) {
+		switch (sksec->sclass) {
 		case SECCLASS_TCP_SOCKET:
 			node_perm = TCP_SOCKET__NODE_BIND;
 			break;
@@ -3843,8 +3786,8 @@
 		else
 			ipv6_addr_copy(&ad.u.net.v6info.saddr, &addr6->sin6_addr);
 
-		err = avc_has_perm(isec->sid, sid,
-				   isec->sclass, node_perm, &ad);
+		err = avc_has_perm(sksec->sid, sid,
+				   sksec->sclass, node_perm, &ad);
 		if (err)
 			goto out;
 	}
@@ -3855,19 +3798,18 @@
 static int selinux_socket_connect(struct socket *sock, struct sockaddr *address, int addrlen)
 {
 	struct sock *sk = sock->sk;
-	struct inode_security_struct *isec;
+	struct sk_security_struct *sksec = sk->sk_security;
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__CONNECT);
+	err = sock_has_perm(current, sk, SOCKET__CONNECT);
 	if (err)
 		return err;
 
 	/*
 	 * If a TCP or DCCP socket, check name_connect permission for the port.
 	 */
-	isec = SOCK_INODE(sock)->i_security;
-	if (isec->sclass == SECCLASS_TCP_SOCKET ||
-	    isec->sclass == SECCLASS_DCCP_SOCKET) {
+	if (sksec->sclass == SECCLASS_TCP_SOCKET ||
+	    sksec->sclass == SECCLASS_DCCP_SOCKET) {
 		struct common_audit_data ad;
 		struct sockaddr_in *addr4 = NULL;
 		struct sockaddr_in6 *addr6 = NULL;
@@ -3890,13 +3832,13 @@
 		if (err)
 			goto out;
 
-		perm = (isec->sclass == SECCLASS_TCP_SOCKET) ?
+		perm = (sksec->sclass == SECCLASS_TCP_SOCKET) ?
 		       TCP_SOCKET__NAME_CONNECT : DCCP_SOCKET__NAME_CONNECT;
 
 		COMMON_AUDIT_DATA_INIT(&ad, NET);
 		ad.u.net.dport = htons(snum);
 		ad.u.net.family = sk->sk_family;
-		err = avc_has_perm(isec->sid, sid, isec->sclass, perm, &ad);
+		err = avc_has_perm(sksec->sid, sid, sksec->sclass, perm, &ad);
 		if (err)
 			goto out;
 	}
@@ -3909,7 +3851,7 @@
 
 static int selinux_socket_listen(struct socket *sock, int backlog)
 {
-	return socket_has_perm(current, sock, SOCKET__LISTEN);
+	return sock_has_perm(current, sock->sk, SOCKET__LISTEN);
 }
 
 static int selinux_socket_accept(struct socket *sock, struct socket *newsock)
@@ -3918,7 +3860,7 @@
 	struct inode_security_struct *isec;
 	struct inode_security_struct *newisec;
 
-	err = socket_has_perm(current, sock, SOCKET__ACCEPT);
+	err = sock_has_perm(current, sock->sk, SOCKET__ACCEPT);
 	if (err)
 		return err;
 
@@ -3935,30 +3877,30 @@
 static int selinux_socket_sendmsg(struct socket *sock, struct msghdr *msg,
 				  int size)
 {
-	return socket_has_perm(current, sock, SOCKET__WRITE);
+	return sock_has_perm(current, sock->sk, SOCKET__WRITE);
 }
 
 static int selinux_socket_recvmsg(struct socket *sock, struct msghdr *msg,
 				  int size, int flags)
 {
-	return socket_has_perm(current, sock, SOCKET__READ);
+	return sock_has_perm(current, sock->sk, SOCKET__READ);
 }
 
 static int selinux_socket_getsockname(struct socket *sock)
 {
-	return socket_has_perm(current, sock, SOCKET__GETATTR);
+	return sock_has_perm(current, sock->sk, SOCKET__GETATTR);
 }
 
 static int selinux_socket_getpeername(struct socket *sock)
 {
-	return socket_has_perm(current, sock, SOCKET__GETATTR);
+	return sock_has_perm(current, sock->sk, SOCKET__GETATTR);
 }
 
 static int selinux_socket_setsockopt(struct socket *sock, int level, int optname)
 {
 	int err;
 
-	err = socket_has_perm(current, sock, SOCKET__SETOPT);
+	err = sock_has_perm(current, sock->sk, SOCKET__SETOPT);
 	if (err)
 		return err;
 
@@ -3968,68 +3910,58 @@
 static int selinux_socket_getsockopt(struct socket *sock, int level,
 				     int optname)
 {
-	return socket_has_perm(current, sock, SOCKET__GETOPT);
+	return sock_has_perm(current, sock->sk, SOCKET__GETOPT);
 }
 
 static int selinux_socket_shutdown(struct socket *sock, int how)
 {
-	return socket_has_perm(current, sock, SOCKET__SHUTDOWN);
+	return sock_has_perm(current, sock->sk, SOCKET__SHUTDOWN);
 }
 
 static int selinux_socket_unix_stream_connect(struct socket *sock,
 					      struct socket *other,
 					      struct sock *newsk)
 {
-	struct sk_security_struct *sksec;
-	struct inode_security_struct *isec;
-	struct inode_security_struct *other_isec;
+	struct sk_security_struct *sksec_sock = sock->sk->sk_security;
+	struct sk_security_struct *sksec_other = other->sk->sk_security;
+	struct sk_security_struct *sksec_new = newsk->sk_security;
 	struct common_audit_data ad;
 	int err;
 
-	isec = SOCK_INODE(sock)->i_security;
-	other_isec = SOCK_INODE(other)->i_security;
-
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
 	ad.u.net.sk = other->sk;
 
-	err = avc_has_perm(isec->sid, other_isec->sid,
-			   isec->sclass,
+	err = avc_has_perm(sksec_sock->sid, sksec_other->sid,
+			   sksec_other->sclass,
 			   UNIX_STREAM_SOCKET__CONNECTTO, &ad);
 	if (err)
 		return err;
 
-	/* connecting socket */
-	sksec = sock->sk->sk_security;
-	sksec->peer_sid = other_isec->sid;
-
 	/* server child socket */
-	sksec = newsk->sk_security;
-	sksec->peer_sid = isec->sid;
-	err = security_sid_mls_copy(other_isec->sid, sksec->peer_sid, &sksec->sid);
+	sksec_new->peer_sid = sksec_sock->sid;
+	err = security_sid_mls_copy(sksec_other->sid, sksec_sock->sid,
+				    &sksec_new->sid);
+	if (err)
+		return err;
 
-	return err;
+	/* connecting socket */
+	sksec_sock->peer_sid = sksec_new->sid;
+
+	return 0;
 }
 
 static int selinux_socket_unix_may_send(struct socket *sock,
 					struct socket *other)
 {
-	struct inode_security_struct *isec;
-	struct inode_security_struct *other_isec;
+	struct sk_security_struct *ssec = sock->sk->sk_security;
+	struct sk_security_struct *osec = other->sk->sk_security;
 	struct common_audit_data ad;
-	int err;
-
-	isec = SOCK_INODE(sock)->i_security;
-	other_isec = SOCK_INODE(other)->i_security;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
 	ad.u.net.sk = other->sk;
 
-	err = avc_has_perm(isec->sid, other_isec->sid,
-			   isec->sclass, SOCKET__SENDTO, &ad);
-	if (err)
-		return err;
-
-	return 0;
+	return avc_has_perm(ssec->sid, osec->sid, osec->sclass, SOCKET__SENDTO,
+			    &ad);
 }
 
 static int selinux_inet_sys_rcv_skb(int ifindex, char *addrp, u16 family,
@@ -4168,26 +4100,18 @@
 	int err = 0;
 	char *scontext;
 	u32 scontext_len;
-	struct sk_security_struct *sksec;
-	struct inode_security_struct *isec;
+	struct sk_security_struct *sksec = sock->sk->sk_security;
 	u32 peer_sid = SECSID_NULL;
 
-	isec = SOCK_INODE(sock)->i_security;
-
-	if (isec->sclass == SECCLASS_UNIX_STREAM_SOCKET ||
-	    isec->sclass == SECCLASS_TCP_SOCKET) {
-		sksec = sock->sk->sk_security;
+	if (sksec->sclass == SECCLASS_UNIX_STREAM_SOCKET ||
+	    sksec->sclass == SECCLASS_TCP_SOCKET)
 		peer_sid = sksec->peer_sid;
-	}
-	if (peer_sid == SECSID_NULL) {
-		err = -ENOPROTOOPT;
-		goto out;
-	}
+	if (peer_sid == SECSID_NULL)
+		return -ENOPROTOOPT;
 
 	err = security_sid_to_context(peer_sid, &scontext, &scontext_len);
-
 	if (err)
-		goto out;
+		return err;
 
 	if (scontext_len > len) {
 		err = -ERANGE;
@@ -4200,9 +4124,7 @@
 out_len:
 	if (put_user(scontext_len, optlen))
 		err = -EFAULT;
-
 	kfree(scontext);
-out:
 	return err;
 }
 
@@ -4234,12 +4156,27 @@
 
 static int selinux_sk_alloc_security(struct sock *sk, int family, gfp_t priority)
 {
-	return sk_alloc_security(sk, family, priority);
+	struct sk_security_struct *sksec;
+
+	sksec = kzalloc(sizeof(*sksec), priority);
+	if (!sksec)
+		return -ENOMEM;
+
+	sksec->peer_sid = SECINITSID_UNLABELED;
+	sksec->sid = SECINITSID_UNLABELED;
+	selinux_netlbl_sk_security_reset(sksec);
+	sk->sk_security = sksec;
+
+	return 0;
 }
 
 static void selinux_sk_free_security(struct sock *sk)
 {
-	sk_free_security(sk);
+	struct sk_security_struct *sksec = sk->sk_security;
+
+	sk->sk_security = NULL;
+	selinux_netlbl_sk_security_free(sksec);
+	kfree(sksec);
 }
 
 static void selinux_sk_clone_security(const struct sock *sk, struct sock *newsk)
@@ -4399,8 +4336,7 @@
 	int err = 0;
 	u32 perm;
 	struct nlmsghdr *nlh;
-	struct socket *sock = sk->sk_socket;
-	struct inode_security_struct *isec = SOCK_INODE(sock)->i_security;
+	struct sk_security_struct *sksec = sk->sk_security;
 
 	if (skb->len < NLMSG_SPACE(0)) {
 		err = -EINVAL;
@@ -4408,13 +4344,13 @@
 	}
 	nlh = nlmsg_hdr(skb);
 
-	err = selinux_nlmsg_lookup(isec->sclass, nlh->nlmsg_type, &perm);
+	err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
 	if (err) {
 		if (err == -EINVAL) {
 			audit_log(current->audit_context, GFP_KERNEL, AUDIT_SELINUX_ERR,
 				  "SELinux:  unrecognized netlink message"
 				  " type=%hu for sclass=%hu\n",
-				  nlh->nlmsg_type, isec->sclass);
+				  nlh->nlmsg_type, sksec->sclass);
 			if (!selinux_enforcing || security_get_allow_unknown())
 				err = 0;
 		}
@@ -4425,7 +4361,7 @@
 		goto out;
 	}
 
-	err = socket_has_perm(current, sock, perm);
+	err = sock_has_perm(current, sk, perm);
 out:
 	return err;
 }
diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h
index 8b32e95..b4c9eb4 100644
--- a/security/selinux/include/classmap.h
+++ b/security/selinux/include/classmap.h
@@ -2,7 +2,8 @@
     "getattr", "setattr", "lock", "relabelfrom", "relabelto", "append"
 
 #define COMMON_FILE_PERMS COMMON_FILE_SOCK_PERMS, "unlink", "link", \
-    "rename", "execute", "swapon", "quotaon", "mounton"
+    "rename", "execute", "swapon", "quotaon", "mounton", "audit_access", \
+    "open", "execmod"
 
 #define COMMON_SOCK_PERMS COMMON_FILE_SOCK_PERMS, "bind", "connect", \
     "listen", "accept", "getopt", "setopt", "shutdown", "recvfrom",  \
@@ -43,22 +44,21 @@
 	    "quotaget", NULL } },
 	{ "file",
 	  { COMMON_FILE_PERMS,
-	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	    "execute_no_trans", "entrypoint", NULL } },
 	{ "dir",
 	  { COMMON_FILE_PERMS, "add_name", "remove_name",
-	    "reparent", "search", "rmdir", "open", NULL } },
+	    "reparent", "search", "rmdir", NULL } },
 	{ "fd", { "use", NULL } },
 	{ "lnk_file",
 	  { COMMON_FILE_PERMS, NULL } },
 	{ "chr_file",
-	  { COMMON_FILE_PERMS,
-	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "blk_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "sock_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "fifo_file",
-	  { COMMON_FILE_PERMS, "open", NULL } },
+	  { COMMON_FILE_PERMS, NULL } },
 	{ "socket",
 	  { COMMON_SOCK_PERMS, NULL } },
 	{ "tcp_socket",
diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c
index dc92792..65ebfe9 100644
--- a/security/selinux/netnode.c
+++ b/security/selinux/netnode.c
@@ -183,8 +183,6 @@
 		BUG();
 	}
 
-	INIT_RCU_HEAD(&node->rcu);
-
 	/* we need to impose a limit on the growth of the hash table so check
 	 * this bucket to make sure it is within the specified bounds */
 	list_add_rcu(&node->list, &sel_netnode_hash[idx].list);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 0293843..79a1bb6 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -184,6 +184,7 @@
 static const struct file_operations sel_enforce_ops = {
 	.read		= sel_read_enforce,
 	.write		= sel_write_enforce,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_handle_unknown(struct file *filp, char __user *buf,
@@ -201,6 +202,7 @@
 
 static const struct file_operations sel_handle_unknown_ops = {
 	.read		= sel_read_handle_unknown,
+	.llseek		= generic_file_llseek,
 };
 
 #ifdef CONFIG_SECURITY_SELINUX_DISABLE
@@ -251,6 +253,7 @@
 
 static const struct file_operations sel_disable_ops = {
 	.write		= sel_write_disable,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_policyvers(struct file *filp, char __user *buf,
@@ -265,6 +268,7 @@
 
 static const struct file_operations sel_policyvers_ops = {
 	.read		= sel_read_policyvers,
+	.llseek		= generic_file_llseek,
 };
 
 /* declaration for sel_write_load */
@@ -289,6 +293,7 @@
 
 static const struct file_operations sel_mls_ops = {
 	.read		= sel_read_mls,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_write_load(struct file *file, const char __user *buf,
@@ -356,6 +361,7 @@
 
 static const struct file_operations sel_load_ops = {
 	.write		= sel_write_load,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_write_context(struct file *file, char *buf, size_t size)
@@ -437,6 +443,7 @@
 static const struct file_operations sel_checkreqprot_ops = {
 	.read		= sel_read_checkreqprot,
 	.write		= sel_write_checkreqprot,
+	.llseek		= generic_file_llseek,
 };
 
 /*
@@ -482,6 +489,7 @@
 	.write		= selinux_transaction_write,
 	.read		= simple_transaction_read,
 	.release	= simple_transaction_release,
+	.llseek		= generic_file_llseek,
 };
 
 /*
@@ -883,6 +891,7 @@
 static const struct file_operations sel_bool_ops = {
 	.read		= sel_read_bool,
 	.write		= sel_write_bool,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_commit_bools_write(struct file *filep,
@@ -935,6 +944,7 @@
 
 static const struct file_operations sel_commit_bools_ops = {
 	.write		= sel_commit_bools_write,
+	.llseek		= generic_file_llseek,
 };
 
 static void sel_remove_entries(struct dentry *de)
@@ -1127,10 +1137,12 @@
 static const struct file_operations sel_avc_cache_threshold_ops = {
 	.read		= sel_read_avc_cache_threshold,
 	.write		= sel_write_avc_cache_threshold,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations sel_avc_hash_stats_ops = {
 	.read		= sel_read_avc_hash_stats,
+	.llseek		= generic_file_llseek,
 };
 
 #ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
@@ -1255,6 +1267,7 @@
 
 static const struct file_operations sel_initcon_ops = {
 	.read		= sel_read_initcon,
+	.llseek		= generic_file_llseek,
 };
 
 static int sel_make_initcon_files(struct dentry *dir)
@@ -1330,6 +1343,7 @@
 
 static const struct file_operations sel_class_ops = {
 	.read		= sel_read_class,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_perm(struct file *file, char __user *buf,
@@ -1354,6 +1368,7 @@
 
 static const struct file_operations sel_perm_ops = {
 	.read		= sel_read_perm,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t sel_read_policycap(struct file *file, char __user *buf,
@@ -1372,6 +1387,7 @@
 
 static const struct file_operations sel_policycap_ops = {
 	.read		= sel_read_policycap,
+	.llseek		= generic_file_llseek,
 };
 
 static int sel_make_perm_files(char *objclass, int classvalue,
diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c
index 1215b8e..929480c 100644
--- a/security/selinux/ss/avtab.c
+++ b/security/selinux/ss/avtab.c
@@ -342,20 +342,20 @@
 
 	if (vers < POLICYDB_VERSION_AVTAB) {
 		rc = next_entry(buf32, fp, sizeof(u32));
-		if (rc < 0) {
+		if (rc) {
 			printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-			return -1;
+			return rc;
 		}
 		items2 = le32_to_cpu(buf32[0]);
 		if (items2 > ARRAY_SIZE(buf32)) {
 			printk(KERN_ERR "SELinux: avtab: entry overflow\n");
-			return -1;
+			return -EINVAL;
 
 		}
 		rc = next_entry(buf32, fp, sizeof(u32)*items2);
-		if (rc < 0) {
+		if (rc) {
 			printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-			return -1;
+			return rc;
 		}
 		items = 0;
 
@@ -363,19 +363,19 @@
 		key.source_type = (u16)val;
 		if (key.source_type != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated source type\n");
-			return -1;
+			return -EINVAL;
 		}
 		val = le32_to_cpu(buf32[items++]);
 		key.target_type = (u16)val;
 		if (key.target_type != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated target type\n");
-			return -1;
+			return -EINVAL;
 		}
 		val = le32_to_cpu(buf32[items++]);
 		key.target_class = (u16)val;
 		if (key.target_class != val) {
 			printk(KERN_ERR "SELinux: avtab: truncated target class\n");
-			return -1;
+			return -EINVAL;
 		}
 
 		val = le32_to_cpu(buf32[items++]);
@@ -383,12 +383,12 @@
 
 		if (!(val & (AVTAB_AV | AVTAB_TYPE))) {
 			printk(KERN_ERR "SELinux: avtab: null entry\n");
-			return -1;
+			return -EINVAL;
 		}
 		if ((val & AVTAB_AV) &&
 		    (val & AVTAB_TYPE)) {
 			printk(KERN_ERR "SELinux: avtab: entry has both access vectors and types\n");
-			return -1;
+			return -EINVAL;
 		}
 
 		for (i = 0; i < ARRAY_SIZE(spec_order); i++) {
@@ -403,15 +403,15 @@
 
 		if (items != items2) {
 			printk(KERN_ERR "SELinux: avtab: entry only had %d items, expected %d\n", items2, items);
-			return -1;
+			return -EINVAL;
 		}
 		return 0;
 	}
 
 	rc = next_entry(buf16, fp, sizeof(u16)*4);
-	if (rc < 0) {
+	if (rc) {
 		printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-		return -1;
+		return rc;
 	}
 
 	items = 0;
@@ -424,7 +424,7 @@
 	    !policydb_type_isvalid(pol, key.target_type) ||
 	    !policydb_class_isvalid(pol, key.target_class)) {
 		printk(KERN_ERR "SELinux: avtab: invalid type or class\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	set = 0;
@@ -434,19 +434,19 @@
 	}
 	if (!set || set > 1) {
 		printk(KERN_ERR "SELinux:  avtab:  more than one specifier\n");
-		return -1;
+		return -EINVAL;
 	}
 
 	rc = next_entry(buf32, fp, sizeof(u32));
-	if (rc < 0) {
+	if (rc) {
 		printk(KERN_ERR "SELinux: avtab: truncated entry\n");
-		return -1;
+		return rc;
 	}
 	datum.data = le32_to_cpu(*buf32);
 	if ((key.specified & AVTAB_TYPE) &&
 	    !policydb_type_isvalid(pol, datum.data)) {
 		printk(KERN_ERR "SELinux: avtab: invalid type\n");
-		return -1;
+		return -EINVAL;
 	}
 	return insertf(a, &key, &datum, p);
 }
@@ -487,8 +487,7 @@
 				printk(KERN_ERR "SELinux: avtab: out of memory\n");
 			else if (rc == -EEXIST)
 				printk(KERN_ERR "SELinux: avtab: duplicate entry\n");
-			else
-				rc = -EINVAL;
+
 			goto bad;
 		}
 	}
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 4a4e35c..c91e150 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -117,10 +117,14 @@
 
 int cond_policydb_init(struct policydb *p)
 {
+	int rc;
+
 	p->bool_val_to_struct = NULL;
 	p->cond_list = NULL;
-	if (avtab_init(&p->te_cond_avtab))
-		return -1;
+
+	rc = avtab_init(&p->te_cond_avtab);
+	if (rc)
+		return rc;
 
 	return 0;
 }
@@ -219,34 +223,37 @@
 
 	booldatum = kzalloc(sizeof(struct cond_bool_datum), GFP_KERNEL);
 	if (!booldatum)
-		return -1;
+		return -ENOMEM;
 
 	rc = next_entry(buf, fp, sizeof buf);
-	if (rc < 0)
+	if (rc)
 		goto err;
 
 	booldatum->value = le32_to_cpu(buf[0]);
 	booldatum->state = le32_to_cpu(buf[1]);
 
+	rc = -EINVAL;
 	if (!bool_isvalid(booldatum))
 		goto err;
 
 	len = le32_to_cpu(buf[2]);
 
+	rc = -ENOMEM;
 	key = kmalloc(len + 1, GFP_KERNEL);
 	if (!key)
 		goto err;
 	rc = next_entry(key, fp, len);
-	if (rc < 0)
+	if (rc)
 		goto err;
 	key[len] = '\0';
-	if (hashtab_insert(h, key, booldatum))
+	rc = hashtab_insert(h, key, booldatum);
+	if (rc)
 		goto err;
 
 	return 0;
 err:
 	cond_destroy_bool(key, booldatum, NULL);
-	return -1;
+	return rc;
 }
 
 struct cond_insertf_data {
@@ -263,7 +270,7 @@
 	struct cond_av_list *other = data->other, *list, *cur;
 	struct avtab_node *node_ptr;
 	u8 found;
-
+	int rc = -EINVAL;
 
 	/*
 	 * For type rules we have to make certain there aren't any
@@ -313,12 +320,15 @@
 	node_ptr = avtab_insert_nonunique(&p->te_cond_avtab, k, d);
 	if (!node_ptr) {
 		printk(KERN_ERR "SELinux: could not insert rule.\n");
+		rc = -ENOMEM;
 		goto err;
 	}
 
 	list = kzalloc(sizeof(struct cond_av_list), GFP_KERNEL);
-	if (!list)
+	if (!list) {
+		rc = -ENOMEM;
 		goto err;
+	}
 
 	list->node = node_ptr;
 	if (!data->head)
@@ -331,7 +341,7 @@
 err:
 	cond_av_list_destroy(data->head);
 	data->head = NULL;
-	return -1;
+	return rc;
 }
 
 static int cond_read_av_list(struct policydb *p, void *fp, struct cond_av_list **ret_list, struct cond_av_list *other)
@@ -345,8 +355,8 @@
 
 	len = 0;
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	len = le32_to_cpu(buf[0]);
 	if (len == 0)
@@ -361,7 +371,6 @@
 				     &data);
 		if (rc)
 			return rc;
-
 	}
 
 	*ret_list = data.head;
@@ -390,24 +399,25 @@
 	struct cond_expr *expr = NULL, *last = NULL;
 
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	node->cur_state = le32_to_cpu(buf[0]);
 
 	len = 0;
 	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	/* expr */
 	len = le32_to_cpu(buf[0]);
 
 	for (i = 0; i < len; i++) {
 		rc = next_entry(buf, fp, sizeof(u32) * 2);
-		if (rc < 0)
+		if (rc)
 			goto err;
 
+		rc = -ENOMEM;
 		expr = kzalloc(sizeof(struct cond_expr), GFP_KERNEL);
 		if (!expr)
 			goto err;
@@ -416,6 +426,7 @@
 		expr->bool = le32_to_cpu(buf[1]);
 
 		if (!expr_isvalid(p, expr)) {
+			rc = -EINVAL;
 			kfree(expr);
 			goto err;
 		}
@@ -427,14 +438,16 @@
 		last = expr;
 	}
 
-	if (cond_read_av_list(p, fp, &node->true_list, NULL) != 0)
+	rc = cond_read_av_list(p, fp, &node->true_list, NULL);
+	if (rc)
 		goto err;
-	if (cond_read_av_list(p, fp, &node->false_list, node->true_list) != 0)
+	rc = cond_read_av_list(p, fp, &node->false_list, node->true_list);
+	if (rc)
 		goto err;
 	return 0;
 err:
 	cond_node_destroy(node);
-	return -1;
+	return rc;
 }
 
 int cond_read_list(struct policydb *p, void *fp)
@@ -445,8 +458,8 @@
 	int rc;
 
 	rc = next_entry(buf, fp, sizeof buf);
-	if (rc < 0)
-		return -1;
+	if (rc)
+		return rc;
 
 	len = le32_to_cpu(buf[0]);
 
@@ -455,11 +468,13 @@
 		goto err;
 
 	for (i = 0; i < len; i++) {
+		rc = -ENOMEM;
 		node = kzalloc(sizeof(struct cond_node), GFP_KERNEL);
 		if (!node)
 			goto err;
 
-		if (cond_read_node(p, node, fp) != 0)
+		rc = cond_read_node(p, node, fp);
+		if (rc)
 			goto err;
 
 		if (i == 0)
@@ -472,7 +487,7 @@
 err:
 	cond_list_destroy(p->cond_list);
 	p->cond_list = NULL;
-	return -1;
+	return rc;
 }
 
 /* Determine whether additional permissions are granted by the conditional
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index c57802a..3a29704 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -31,6 +31,7 @@
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/audit.h>
+#include <linux/flex_array.h>
 #include "security.h"
 
 #include "policydb.h"
@@ -655,6 +656,9 @@
 
 static void ocontext_destroy(struct ocontext *c, int i)
 {
+	if (!c)
+		return;
+
 	context_destroy(&c->context[0]);
 	context_destroy(&c->context[1]);
 	if (i == OCON_ISID || i == OCON_FS ||
@@ -736,11 +740,17 @@
 	hashtab_map(p->range_tr, range_tr_destroy, NULL);
 	hashtab_destroy(p->range_tr);
 
-	if (p->type_attr_map) {
-		for (i = 0; i < p->p_types.nprim; i++)
-			ebitmap_destroy(&p->type_attr_map[i]);
+	if (p->type_attr_map_array) {
+		for (i = 0; i < p->p_types.nprim; i++) {
+			struct ebitmap *e;
+
+			e = flex_array_get(p->type_attr_map_array, i);
+			if (!e)
+				continue;
+			ebitmap_destroy(e);
+		}
+		flex_array_free(p->type_attr_map_array);
 	}
-	kfree(p->type_attr_map);
 	ebitmap_destroy(&p->policycaps);
 	ebitmap_destroy(&p->permissive_map);
 
@@ -1701,6 +1711,333 @@
 	return 1U << (perdatum->value-1);
 }
 
+static int range_read(struct policydb *p, void *fp)
+{
+	struct range_trans *rt = NULL;
+	struct mls_range *r = NULL;
+	int i, rc;
+	__le32 buf[2];
+	u32 nel;
+
+	if (p->policyvers < POLICYDB_VERSION_MLS)
+		return 0;
+
+	rc = next_entry(buf, fp, sizeof(u32));
+	if (rc)
+		goto out;
+
+	nel = le32_to_cpu(buf[0]);
+	for (i = 0; i < nel; i++) {
+		rc = -ENOMEM;
+		rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+		if (!rt)
+			goto out;
+
+		rc = next_entry(buf, fp, (sizeof(u32) * 2));
+		if (rc)
+			goto out;
+
+		rt->source_type = le32_to_cpu(buf[0]);
+		rt->target_type = le32_to_cpu(buf[1]);
+		if (p->policyvers >= POLICYDB_VERSION_RANGETRANS) {
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+			rt->target_class = le32_to_cpu(buf[0]);
+		} else
+			rt->target_class = p->process_class;
+
+		rc = -EINVAL;
+		if (!policydb_type_isvalid(p, rt->source_type) ||
+		    !policydb_type_isvalid(p, rt->target_type) ||
+		    !policydb_class_isvalid(p, rt->target_class))
+			goto out;
+
+		rc = -ENOMEM;
+		r = kzalloc(sizeof(*r), GFP_KERNEL);
+		if (!r)
+			goto out;
+
+		rc = mls_read_range_helper(r, fp);
+		if (rc)
+			goto out;
+
+		rc = -EINVAL;
+		if (!mls_range_isvalid(p, r)) {
+			printk(KERN_WARNING "SELinux:  rangetrans:  invalid range\n");
+			goto out;
+		}
+
+		rc = hashtab_insert(p->range_tr, rt, r);
+		if (rc)
+			goto out;
+
+		rt = NULL;
+		r = NULL;
+	}
+	rangetr_hash_eval(p->range_tr);
+	rc = 0;
+out:
+	kfree(rt);
+	kfree(r);
+	return rc;
+}
+
+static int genfs_read(struct policydb *p, void *fp)
+{
+	int i, j, rc;
+	u32 nel, nel2, len, len2;
+	__le32 buf[1];
+	struct ocontext *l, *c;
+	struct ocontext *newc = NULL;
+	struct genfs *genfs_p, *genfs;
+	struct genfs *newgenfs = NULL;
+
+	rc = next_entry(buf, fp, sizeof(u32));
+	if (rc)
+		goto out;
+	nel = le32_to_cpu(buf[0]);
+
+	for (i = 0; i < nel; i++) {
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+		len = le32_to_cpu(buf[0]);
+
+		rc = -ENOMEM;
+		newgenfs = kzalloc(sizeof(*newgenfs), GFP_KERNEL);
+		if (!newgenfs)
+			goto out;
+
+		rc = -ENOMEM;
+		newgenfs->fstype = kmalloc(len + 1, GFP_KERNEL);
+		if (!newgenfs->fstype)
+			goto out;
+
+		rc = next_entry(newgenfs->fstype, fp, len);
+		if (rc)
+			goto out;
+
+		newgenfs->fstype[len] = 0;
+
+		for (genfs_p = NULL, genfs = p->genfs; genfs;
+		     genfs_p = genfs, genfs = genfs->next) {
+			rc = -EINVAL;
+			if (strcmp(newgenfs->fstype, genfs->fstype) == 0) {
+				printk(KERN_ERR "SELinux:  dup genfs fstype %s\n",
+				       newgenfs->fstype);
+				goto out;
+			}
+			if (strcmp(newgenfs->fstype, genfs->fstype) < 0)
+				break;
+		}
+		newgenfs->next = genfs;
+		if (genfs_p)
+			genfs_p->next = newgenfs;
+		else
+			p->genfs = newgenfs;
+		genfs = newgenfs;
+		newgenfs = NULL;
+
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+
+		nel2 = le32_to_cpu(buf[0]);
+		for (j = 0; j < nel2; j++) {
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+			len = le32_to_cpu(buf[0]);
+
+			rc = -ENOMEM;
+			newc = kzalloc(sizeof(*newc), GFP_KERNEL);
+			if (!newc)
+				goto out;
+
+			rc = -ENOMEM;
+			newc->u.name = kmalloc(len + 1, GFP_KERNEL);
+			if (!newc->u.name)
+				goto out;
+
+			rc = next_entry(newc->u.name, fp, len);
+			if (rc)
+				goto out;
+			newc->u.name[len] = 0;
+
+			rc = next_entry(buf, fp, sizeof(u32));
+			if (rc)
+				goto out;
+
+			newc->v.sclass = le32_to_cpu(buf[0]);
+			rc = context_read_and_validate(&newc->context[0], p, fp);
+			if (rc)
+				goto out;
+
+			for (l = NULL, c = genfs->head; c;
+			     l = c, c = c->next) {
+				rc = -EINVAL;
+				if (!strcmp(newc->u.name, c->u.name) &&
+				    (!c->v.sclass || !newc->v.sclass ||
+				     newc->v.sclass == c->v.sclass)) {
+					printk(KERN_ERR "SELinux:  dup genfs entry (%s,%s)\n",
+					       genfs->fstype, c->u.name);
+					goto out;
+				}
+				len = strlen(newc->u.name);
+				len2 = strlen(c->u.name);
+				if (len > len2)
+					break;
+			}
+
+			newc->next = c;
+			if (l)
+				l->next = newc;
+			else
+				genfs->head = newc;
+			newc = NULL;
+		}
+	}
+	rc = 0;
+out:
+	if (newgenfs)
+		kfree(newgenfs->fstype);
+	kfree(newgenfs);
+	ocontext_destroy(newc, OCON_FSUSE);
+
+	return rc;
+}
+
+static int ocontext_read(struct policydb *p, struct policydb_compat_info *info,
+			 void *fp)
+{
+	int i, j, rc;
+	u32 nel, len;
+	__le32 buf[3];
+	struct ocontext *l, *c;
+	u32 nodebuf[8];
+
+	for (i = 0; i < info->ocon_num; i++) {
+		rc = next_entry(buf, fp, sizeof(u32));
+		if (rc)
+			goto out;
+		nel = le32_to_cpu(buf[0]);
+
+		l = NULL;
+		for (j = 0; j < nel; j++) {
+			rc = -ENOMEM;
+			c = kzalloc(sizeof(*c), GFP_KERNEL);
+			if (!c)
+				goto out;
+			if (l)
+				l->next = c;
+			else
+				p->ocontexts[i] = c;
+			l = c;
+
+			switch (i) {
+			case OCON_ISID:
+				rc = next_entry(buf, fp, sizeof(u32));
+				if (rc)
+					goto out;
+
+				c->sid[0] = le32_to_cpu(buf[0]);
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_FS:
+			case OCON_NETIF:
+				rc = next_entry(buf, fp, sizeof(u32));
+				if (rc)
+					goto out;
+				len = le32_to_cpu(buf[0]);
+
+				rc = -ENOMEM;
+				c->u.name = kmalloc(len + 1, GFP_KERNEL);
+				if (!c->u.name)
+					goto out;
+
+				rc = next_entry(c->u.name, fp, len);
+				if (rc)
+					goto out;
+
+				c->u.name[len] = 0;
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				rc = context_read_and_validate(&c->context[1], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_PORT:
+				rc = next_entry(buf, fp, sizeof(u32)*3);
+				if (rc)
+					goto out;
+				c->u.port.protocol = le32_to_cpu(buf[0]);
+				c->u.port.low_port = le32_to_cpu(buf[1]);
+				c->u.port.high_port = le32_to_cpu(buf[2]);
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_NODE:
+				rc = next_entry(nodebuf, fp, sizeof(u32) * 2);
+				if (rc)
+					goto out;
+				c->u.node.addr = nodebuf[0]; /* network order */
+				c->u.node.mask = nodebuf[1]; /* network order */
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_FSUSE:
+				rc = next_entry(buf, fp, sizeof(u32)*2);
+				if (rc)
+					goto out;
+
+				rc = -EINVAL;
+				c->v.behavior = le32_to_cpu(buf[0]);
+				if (c->v.behavior > SECURITY_FS_USE_NONE)
+					goto out;
+
+				rc = -ENOMEM;
+				len = le32_to_cpu(buf[1]);
+				c->u.name = kmalloc(len + 1, GFP_KERNEL);
+				if (!c->u.name)
+					goto out;
+
+				rc = next_entry(c->u.name, fp, len);
+				if (rc)
+					goto out;
+				c->u.name[len] = 0;
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			case OCON_NODE6: {
+				int k;
+
+				rc = next_entry(nodebuf, fp, sizeof(u32) * 8);
+				if (rc)
+					goto out;
+				for (k = 0; k < 4; k++)
+					c->u.node6.addr[k] = nodebuf[k];
+				for (k = 0; k < 4; k++)
+					c->u.node6.mask[k] = nodebuf[k+4];
+				rc = context_read_and_validate(&c->context[0], p, fp);
+				if (rc)
+					goto out;
+				break;
+			}
+			}
+		}
+	}
+	rc = 0;
+out:
+	return rc;
+}
+
 /*
  * Read the configuration data from a policy database binary
  * representation file into a policy database structure.
@@ -1709,16 +2046,12 @@
 {
 	struct role_allow *ra, *lra;
 	struct role_trans *tr, *ltr;
-	struct ocontext *l, *c, *newc;
-	struct genfs *genfs_p, *genfs, *newgenfs;
 	int i, j, rc;
 	__le32 buf[4];
-	u32 nodebuf[8];
-	u32 len, len2, nprim, nel, nel2;
+	u32 len, nprim, nel;
+
 	char *policydb_str;
 	struct policydb_compat_info *info;
-	struct range_trans *rt;
-	struct mls_range *r;
 
 	rc = policydb_init(p);
 	if (rc)
@@ -1919,294 +2252,45 @@
 	if (!p->process_trans_perms)
 		goto bad;
 
-	for (i = 0; i < info->ocon_num; i++) {
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel = le32_to_cpu(buf[0]);
-		l = NULL;
-		for (j = 0; j < nel; j++) {
-			c = kzalloc(sizeof(*c), GFP_KERNEL);
-			if (!c) {
-				rc = -ENOMEM;
-				goto bad;
-			}
-			if (l)
-				l->next = c;
-			else
-				p->ocontexts[i] = c;
-			l = c;
-			rc = -EINVAL;
-			switch (i) {
-			case OCON_ISID:
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0)
-					goto bad;
-				c->sid[0] = le32_to_cpu(buf[0]);
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_FS:
-			case OCON_NETIF:
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0)
-					goto bad;
-				len = le32_to_cpu(buf[0]);
-				c->u.name = kmalloc(len + 1, GFP_KERNEL);
-				if (!c->u.name) {
-					rc = -ENOMEM;
-					goto bad;
-				}
-				rc = next_entry(c->u.name, fp, len);
-				if (rc < 0)
-					goto bad;
-				c->u.name[len] = 0;
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				rc = context_read_and_validate(&c->context[1], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_PORT:
-				rc = next_entry(buf, fp, sizeof(u32)*3);
-				if (rc < 0)
-					goto bad;
-				c->u.port.protocol = le32_to_cpu(buf[0]);
-				c->u.port.low_port = le32_to_cpu(buf[1]);
-				c->u.port.high_port = le32_to_cpu(buf[2]);
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_NODE:
-				rc = next_entry(nodebuf, fp, sizeof(u32) * 2);
-				if (rc < 0)
-					goto bad;
-				c->u.node.addr = nodebuf[0]; /* network order */
-				c->u.node.mask = nodebuf[1]; /* network order */
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_FSUSE:
-				rc = next_entry(buf, fp, sizeof(u32)*2);
-				if (rc < 0)
-					goto bad;
-				c->v.behavior = le32_to_cpu(buf[0]);
-				if (c->v.behavior > SECURITY_FS_USE_NONE)
-					goto bad;
-				len = le32_to_cpu(buf[1]);
-				c->u.name = kmalloc(len + 1, GFP_KERNEL);
-				if (!c->u.name) {
-					rc = -ENOMEM;
-					goto bad;
-				}
-				rc = next_entry(c->u.name, fp, len);
-				if (rc < 0)
-					goto bad;
-				c->u.name[len] = 0;
-				rc = context_read_and_validate(&c->context[0], p, fp);
-				if (rc)
-					goto bad;
-				break;
-			case OCON_NODE6: {
-				int k;
-
-				rc = next_entry(nodebuf, fp, sizeof(u32) * 8);
-				if (rc < 0)
-					goto bad;
-				for (k = 0; k < 4; k++)
-					c->u.node6.addr[k] = nodebuf[k];
-				for (k = 0; k < 4; k++)
-					c->u.node6.mask[k] = nodebuf[k+4];
-				if (context_read_and_validate(&c->context[0], p, fp))
-					goto bad;
-				break;
-			}
-			}
-		}
-	}
-
-	rc = next_entry(buf, fp, sizeof(u32));
-	if (rc < 0)
+	rc = ocontext_read(p, info, fp);
+	if (rc)
 		goto bad;
-	nel = le32_to_cpu(buf[0]);
-	genfs_p = NULL;
-	rc = -EINVAL;
-	for (i = 0; i < nel; i++) {
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		len = le32_to_cpu(buf[0]);
-		newgenfs = kzalloc(sizeof(*newgenfs), GFP_KERNEL);
-		if (!newgenfs) {
-			rc = -ENOMEM;
-			goto bad;
-		}
 
-		newgenfs->fstype = kmalloc(len + 1, GFP_KERNEL);
-		if (!newgenfs->fstype) {
-			rc = -ENOMEM;
-			kfree(newgenfs);
-			goto bad;
-		}
-		rc = next_entry(newgenfs->fstype, fp, len);
-		if (rc < 0) {
-			kfree(newgenfs->fstype);
-			kfree(newgenfs);
-			goto bad;
-		}
-		newgenfs->fstype[len] = 0;
-		for (genfs_p = NULL, genfs = p->genfs; genfs;
-		     genfs_p = genfs, genfs = genfs->next) {
-			if (strcmp(newgenfs->fstype, genfs->fstype) == 0) {
-				printk(KERN_ERR "SELinux:  dup genfs "
-				       "fstype %s\n", newgenfs->fstype);
-				kfree(newgenfs->fstype);
-				kfree(newgenfs);
-				goto bad;
-			}
-			if (strcmp(newgenfs->fstype, genfs->fstype) < 0)
-				break;
-		}
-		newgenfs->next = genfs;
-		if (genfs_p)
-			genfs_p->next = newgenfs;
-		else
-			p->genfs = newgenfs;
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel2 = le32_to_cpu(buf[0]);
-		for (j = 0; j < nel2; j++) {
-			rc = next_entry(buf, fp, sizeof(u32));
-			if (rc < 0)
-				goto bad;
-			len = le32_to_cpu(buf[0]);
+	rc = genfs_read(p, fp);
+	if (rc)
+		goto bad;
 
-			newc = kzalloc(sizeof(*newc), GFP_KERNEL);
-			if (!newc) {
-				rc = -ENOMEM;
-				goto bad;
-			}
+	rc = range_read(p, fp);
+	if (rc)
+		goto bad;
 
-			newc->u.name = kmalloc(len + 1, GFP_KERNEL);
-			if (!newc->u.name) {
-				rc = -ENOMEM;
-				goto bad_newc;
-			}
-			rc = next_entry(newc->u.name, fp, len);
-			if (rc < 0)
-				goto bad_newc;
-			newc->u.name[len] = 0;
-			rc = next_entry(buf, fp, sizeof(u32));
-			if (rc < 0)
-				goto bad_newc;
-			newc->v.sclass = le32_to_cpu(buf[0]);
-			if (context_read_and_validate(&newc->context[0], p, fp))
-				goto bad_newc;
-			for (l = NULL, c = newgenfs->head; c;
-			     l = c, c = c->next) {
-				if (!strcmp(newc->u.name, c->u.name) &&
-				    (!c->v.sclass || !newc->v.sclass ||
-				     newc->v.sclass == c->v.sclass)) {
-					printk(KERN_ERR "SELinux:  dup genfs "
-					       "entry (%s,%s)\n",
-					       newgenfs->fstype, c->u.name);
-					goto bad_newc;
-				}
-				len = strlen(newc->u.name);
-				len2 = strlen(c->u.name);
-				if (len > len2)
-					break;
-			}
+	rc = -ENOMEM;
+	p->type_attr_map_array = flex_array_alloc(sizeof(struct ebitmap),
+						  p->p_types.nprim,
+						  GFP_KERNEL | __GFP_ZERO);
+	if (!p->type_attr_map_array)
+		goto bad;
 
-			newc->next = c;
-			if (l)
-				l->next = newc;
-			else
-				newgenfs->head = newc;
-		}
-	}
-
-	if (p->policyvers >= POLICYDB_VERSION_MLS) {
-		int new_rangetr = p->policyvers >= POLICYDB_VERSION_RANGETRANS;
-		rc = next_entry(buf, fp, sizeof(u32));
-		if (rc < 0)
-			goto bad;
-		nel = le32_to_cpu(buf[0]);
-		for (i = 0; i < nel; i++) {
-			rt = kzalloc(sizeof(*rt), GFP_KERNEL);
-			if (!rt) {
-				rc = -ENOMEM;
-				goto bad;
-			}
-			rc = next_entry(buf, fp, (sizeof(u32) * 2));
-			if (rc < 0) {
-				kfree(rt);
-				goto bad;
-			}
-			rt->source_type = le32_to_cpu(buf[0]);
-			rt->target_type = le32_to_cpu(buf[1]);
-			if (new_rangetr) {
-				rc = next_entry(buf, fp, sizeof(u32));
-				if (rc < 0) {
-					kfree(rt);
-					goto bad;
-				}
-				rt->target_class = le32_to_cpu(buf[0]);
-			} else
-				rt->target_class = p->process_class;
-			if (!policydb_type_isvalid(p, rt->source_type) ||
-			    !policydb_type_isvalid(p, rt->target_type) ||
-			    !policydb_class_isvalid(p, rt->target_class)) {
-				kfree(rt);
-				rc = -EINVAL;
-				goto bad;
-			}
-			r = kzalloc(sizeof(*r), GFP_KERNEL);
-			if (!r) {
-				kfree(rt);
-				rc = -ENOMEM;
-				goto bad;
-			}
-			rc = mls_read_range_helper(r, fp);
-			if (rc) {
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-			if (!mls_range_isvalid(p, r)) {
-				printk(KERN_WARNING "SELinux:  rangetrans:  invalid range\n");
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-			rc = hashtab_insert(p->range_tr, rt, r);
-			if (rc) {
-				kfree(rt);
-				kfree(r);
-				goto bad;
-			}
-		}
-		rangetr_hash_eval(p->range_tr);
-	}
-
-	p->type_attr_map = kmalloc(p->p_types.nprim * sizeof(struct ebitmap), GFP_KERNEL);
-	if (!p->type_attr_map)
+	/* preallocate so we don't have to worry about the put ever failing */
+	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim - 1,
+				 GFP_KERNEL | __GFP_ZERO);
+	if (rc)
 		goto bad;
 
 	for (i = 0; i < p->p_types.nprim; i++) {
-		ebitmap_init(&p->type_attr_map[i]);
+		struct ebitmap *e = flex_array_get(p->type_attr_map_array, i);
+
+		BUG_ON(!e);
+		ebitmap_init(e);
 		if (p->policyvers >= POLICYDB_VERSION_AVTAB) {
-			if (ebitmap_read(&p->type_attr_map[i], fp))
+			rc = ebitmap_read(e, fp);
+			if (rc)
 				goto bad;
 		}
 		/* add the type itself as the degenerate case */
-		if (ebitmap_set_bit(&p->type_attr_map[i], i, 1))
-				goto bad;
+		rc = ebitmap_set_bit(e, i, 1);
+		if (rc)
+			goto bad;
 	}
 
 	rc = policydb_bounds_sanity_check(p);
@@ -2216,8 +2300,6 @@
 	rc = 0;
 out:
 	return rc;
-bad_newc:
-	ocontext_destroy(newc, OCON_FSUSE);
 bad:
 	if (!rc)
 		rc = -EINVAL;
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 26d9adf..310e944 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -24,6 +24,8 @@
 #ifndef _SS_POLICYDB_H_
 #define _SS_POLICYDB_H_
 
+#include <linux/flex_array.h>
+
 #include "symtab.h"
 #include "avtab.h"
 #include "sidtab.h"
@@ -246,7 +248,7 @@
 	struct hashtab *range_tr;
 
 	/* type -> attribute reverse mapping */
-	struct ebitmap *type_attr_map;
+	struct flex_array *type_attr_map_array;
 
 	struct ebitmap policycaps;
 
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 1de60ce9..9ea2fec 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -50,6 +50,7 @@
 #include <linux/audit.h>
 #include <linux/mutex.h>
 #include <linux/selinux.h>
+#include <linux/flex_array.h>
 #include <net/netlabel.h>
 
 #include "flask.h"
@@ -626,8 +627,10 @@
 	 */
 	avkey.target_class = tclass;
 	avkey.specified = AVTAB_AV;
-	sattr = &policydb.type_attr_map[scontext->type - 1];
-	tattr = &policydb.type_attr_map[tcontext->type - 1];
+	sattr = flex_array_get(policydb.type_attr_map_array, scontext->type - 1);
+	BUG_ON(!sattr);
+	tattr = flex_array_get(policydb.type_attr_map_array, tcontext->type - 1);
+	BUG_ON(!tattr);
 	ebitmap_for_each_positive_bit(sattr, snode, i) {
 		ebitmap_for_each_positive_bit(tattr, tnode, j) {
 			avkey.source_type = i + 1;
diff --git a/security/selinux/ss/symtab.c b/security/selinux/ss/symtab.c
index bcf9f62..160326e 100644
--- a/security/selinux/ss/symtab.c
+++ b/security/selinux/ss/symtab.c
@@ -36,7 +36,7 @@
 {
 	s->table = hashtab_create(symhash, symcmp, size);
 	if (!s->table)
-		return -1;
+		return -ENOMEM;
 	s->nprim = 0;
 	return 0;
 }
diff --git a/security/smack/smack.h b/security/smack/smack.h
index c6e9aca..43ae747 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -123,16 +123,6 @@
 #define SMK_FSHAT	"smackfshat="
 #define SMK_FSROOT	"smackfsroot="
 
-/*
- * xattr names
- */
-#define XATTR_SMACK_SUFFIX	"SMACK64"
-#define XATTR_SMACK_IPIN	"SMACK64IPIN"
-#define XATTR_SMACK_IPOUT	"SMACK64IPOUT"
-#define XATTR_NAME_SMACK	XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-
 #define SMACK_CIPSO_OPTION 	"-CIPSO"
 
 /*
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0f2fc48..9192ba3 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -598,6 +598,8 @@
 static int smack_inode_permission(struct inode *inode, int mask)
 {
 	struct smk_audit_info ad;
+
+	mask &= (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND);
 	/*
 	 * No permission to check. Existence test. Yup, it's there.
 	 */
@@ -2191,7 +2193,7 @@
 
 /**
  * smack_d_instantiate - Make sure the blob is correct on an inode
- * @opt_dentry: unused
+ * @opt_dentry: dentry where inode will be attached
  * @inode: the object
  *
  * Set the inode's security blob if it hasn't been done already.
@@ -2310,20 +2312,10 @@
 		/*
 		 * Get the dentry for xattr.
 		 */
-		if (opt_dentry == NULL) {
-			dp = d_find_alias(inode);
-			if (dp == NULL)
-				break;
-		} else {
-			dp = dget(opt_dentry);
-			if (dp == NULL)
-				break;
-		}
-
+		dp = dget(opt_dentry);
 		fetched = smk_fetch(inode, dp);
 		if (fetched != NULL)
 			final = fetched;
-
 		dput(dp);
 		break;
 	}
diff --git a/security/tomoyo/Makefile b/security/tomoyo/Makefile
index 4fb3903..91640e9 100644
--- a/security/tomoyo/Makefile
+++ b/security/tomoyo/Makefile
@@ -1 +1 @@
-obj-y = common.o realpath.o tomoyo.o domain.o file.o gc.o path_group.o
+obj-y = common.o domain.o file.o gc.o group.o load_policy.o memory.o mount.o realpath.o securityfs_if.o tomoyo.o util.o
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index b5dbdc9..ef43995 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -3,99 +3,184 @@
  *
  * Common functions for TOMOYO.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 #include <linux/security.h>
-#include <linux/hardirq.h>
 #include "common.h"
 
-/* Lock for protecting policy. */
-DEFINE_MUTEX(tomoyo_policy_lock);
+static struct tomoyo_profile tomoyo_default_profile = {
+	.learning = &tomoyo_default_profile.preference,
+	.permissive = &tomoyo_default_profile.preference,
+	.enforcing = &tomoyo_default_profile.preference,
+	.preference.enforcing_verbose = true,
+	.preference.learning_max_entry = 2048,
+	.preference.learning_verbose = false,
+	.preference.permissive_verbose = true
+};
 
-/* Has loading policy done? */
-bool tomoyo_policy_loaded;
+/* Profile version. Currently only 20090903 is defined. */
+static unsigned int tomoyo_profile_version;
+
+/* Profile table. Memory is allocated as needed. */
+static struct tomoyo_profile *tomoyo_profile_ptr[TOMOYO_MAX_PROFILES];
 
 /* String table for functionality that takes 4 modes. */
-static const char *tomoyo_mode_4[4] = {
+static const char *tomoyo_mode[4] = {
 	"disabled", "learning", "permissive", "enforcing"
 };
-/* String table for functionality that takes 2 modes. */
-static const char *tomoyo_mode_2[4] = {
-	"disabled", "enabled", "enabled", "enabled"
-};
 
-/*
- * tomoyo_control_array is a static data which contains
- *
- *  (1) functionality name used by /sys/kernel/security/tomoyo/profile .
- *  (2) initial values for "struct tomoyo_profile".
- *  (3) max values for "struct tomoyo_profile".
- */
-static struct {
-	const char *keyword;
-	unsigned int current_value;
-	const unsigned int max_value;
-} tomoyo_control_array[TOMOYO_MAX_CONTROL_INDEX] = {
-	[TOMOYO_MAC_FOR_FILE]     = { "MAC_FOR_FILE",        0,       3 },
-	[TOMOYO_MAX_ACCEPT_ENTRY] = { "MAX_ACCEPT_ENTRY", 2048, INT_MAX },
-	[TOMOYO_VERBOSE]          = { "TOMOYO_VERBOSE",      1,       1 },
+/* String table for /sys/kernel/security/tomoyo/profile */
+static const char *tomoyo_mac_keywords[TOMOYO_MAX_MAC_INDEX
+				       + TOMOYO_MAX_MAC_CATEGORY_INDEX] = {
+	[TOMOYO_MAC_FILE_EXECUTE]    = "file::execute",
+	[TOMOYO_MAC_FILE_OPEN]       = "file::open",
+	[TOMOYO_MAC_FILE_CREATE]     = "file::create",
+	[TOMOYO_MAC_FILE_UNLINK]     = "file::unlink",
+	[TOMOYO_MAC_FILE_MKDIR]      = "file::mkdir",
+	[TOMOYO_MAC_FILE_RMDIR]      = "file::rmdir",
+	[TOMOYO_MAC_FILE_MKFIFO]     = "file::mkfifo",
+	[TOMOYO_MAC_FILE_MKSOCK]     = "file::mksock",
+	[TOMOYO_MAC_FILE_TRUNCATE]   = "file::truncate",
+	[TOMOYO_MAC_FILE_SYMLINK]    = "file::symlink",
+	[TOMOYO_MAC_FILE_REWRITE]    = "file::rewrite",
+	[TOMOYO_MAC_FILE_MKBLOCK]    = "file::mkblock",
+	[TOMOYO_MAC_FILE_MKCHAR]     = "file::mkchar",
+	[TOMOYO_MAC_FILE_LINK]       = "file::link",
+	[TOMOYO_MAC_FILE_RENAME]     = "file::rename",
+	[TOMOYO_MAC_FILE_CHMOD]      = "file::chmod",
+	[TOMOYO_MAC_FILE_CHOWN]      = "file::chown",
+	[TOMOYO_MAC_FILE_CHGRP]      = "file::chgrp",
+	[TOMOYO_MAC_FILE_IOCTL]      = "file::ioctl",
+	[TOMOYO_MAC_FILE_CHROOT]     = "file::chroot",
+	[TOMOYO_MAC_FILE_MOUNT]      = "file::mount",
+	[TOMOYO_MAC_FILE_UMOUNT]     = "file::umount",
+	[TOMOYO_MAC_FILE_PIVOT_ROOT] = "file::pivot_root",
+	[TOMOYO_MAX_MAC_INDEX + TOMOYO_MAC_CATEGORY_FILE] = "file",
 };
 
-/*
- * tomoyo_profile is a structure which is used for holding the mode of access
- * controls. TOMOYO has 4 modes: disabled, learning, permissive, enforcing.
- * An administrator can define up to 256 profiles.
- * The ->profile of "struct tomoyo_domain_info" is used for remembering
- * the profile's number (0 - 255) assigned to that domain.
- */
-static struct tomoyo_profile {
-	unsigned int value[TOMOYO_MAX_CONTROL_INDEX];
-	const struct tomoyo_path_info *comment;
-} *tomoyo_profile_ptr[TOMOYO_MAX_PROFILES];
-
 /* Permit policy management by non-root user? */
 static bool tomoyo_manage_by_non_root;
 
 /* Utility functions. */
 
-/* Open operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_open_control(const u8 type, struct file *file);
-/* Close /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_close_control(struct file *file);
-/* Read operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_read_control(struct file *file, char __user *buffer,
-			       const int buffer_len);
-/* Write operation for /sys/kernel/security/tomoyo/ interface. */
-static int tomoyo_write_control(struct file *file, const char __user *buffer,
-				const int buffer_len);
+/**
+ * tomoyo_yesno - Return "yes" or "no".
+ *
+ * @value: Bool value.
+ */
+static const char *tomoyo_yesno(const unsigned int value)
+{
+	return value ? "yes" : "no";
+}
+
+static void tomoyo_addprintf(char *buffer, int len, const char *fmt, ...)
+{
+	va_list args;
+	const int pos = strlen(buffer);
+	va_start(args, fmt);
+	vsnprintf(buffer + pos, len - pos - 1, fmt, args);
+	va_end(args);
+}
 
 /**
- * tomoyo_parse_name_union - Parse a tomoyo_name_union.
+ * tomoyo_flush - Flush queued string to userspace's buffer.
  *
- * @filename: Name or name group.
- * @ptr:      Pointer to "struct tomoyo_name_union".
+ * @head:   Pointer to "struct tomoyo_io_buffer".
  *
- * Returns true on success, false otherwise.
+ * Returns true if all data was flushed, false otherwise.
  */
-bool tomoyo_parse_name_union(const char *filename,
-			     struct tomoyo_name_union *ptr)
+static bool tomoyo_flush(struct tomoyo_io_buffer *head)
 {
-	if (!tomoyo_is_correct_path(filename, 0, 0, 0))
-		return false;
-	if (filename[0] == '@') {
-		ptr->group = tomoyo_get_path_group(filename + 1);
-		ptr->is_group = true;
-		return ptr->group != NULL;
+	while (head->r.w_pos) {
+		const char *w = head->r.w[0];
+		int len = strlen(w);
+		if (len) {
+			if (len > head->read_user_buf_avail)
+				len = head->read_user_buf_avail;
+			if (!len)
+				return false;
+			if (copy_to_user(head->read_user_buf, w, len))
+				return false;
+			head->read_user_buf_avail -= len;
+			head->read_user_buf += len;
+			w += len;
+		}
+		if (*w) {
+			head->r.w[0] = w;
+			return false;
+		}
+		/* Add '\0' for query. */
+		if (head->poll) {
+			if (!head->read_user_buf_avail ||
+			    copy_to_user(head->read_user_buf, "", 1))
+				return false;
+			head->read_user_buf_avail--;
+			head->read_user_buf++;
+		}
+		head->r.w_pos--;
+		for (len = 0; len < head->r.w_pos; len++)
+			head->r.w[len] = head->r.w[len + 1];
 	}
-	ptr->filename = tomoyo_get_name(filename);
-	ptr->is_group = false;
-	return ptr->filename != NULL;
+	head->r.avail = 0;
+	return true;
+}
+
+/**
+ * tomoyo_set_string - Queue string to "struct tomoyo_io_buffer" structure.
+ *
+ * @head:   Pointer to "struct tomoyo_io_buffer".
+ * @string: String to print.
+ *
+ * Note that @string has to be kept valid until @head is kfree()d.
+ * This means that char[] allocated on stack memory cannot be passed to
+ * this function. Use tomoyo_io_printf() for char[] allocated on stack memory.
+ */
+static void tomoyo_set_string(struct tomoyo_io_buffer *head, const char *string)
+{
+	if (head->r.w_pos < TOMOYO_MAX_IO_READ_QUEUE) {
+		head->r.w[head->r.w_pos++] = string;
+		tomoyo_flush(head);
+	} else
+		WARN_ON(1);
+}
+
+/**
+ * tomoyo_io_printf - printf() to "struct tomoyo_io_buffer" structure.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ * @fmt:  The printf()'s format string, followed by parameters.
+ */
+void tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
+{
+	va_list args;
+	int len;
+	int pos = head->r.avail;
+	int size = head->readbuf_size - pos;
+	if (size <= 0)
+		return;
+	va_start(args, fmt);
+	len = vsnprintf(head->read_buf + pos, size, fmt, args) + 1;
+	va_end(args);
+	if (pos + len >= head->readbuf_size) {
+		WARN_ON(1);
+		return;
+	}
+	head->r.avail += len;
+	tomoyo_set_string(head, head->read_buf + pos);
+}
+
+static void tomoyo_set_space(struct tomoyo_io_buffer *head)
+{
+	tomoyo_set_string(head, " ");
+}
+
+static bool tomoyo_set_lf(struct tomoyo_io_buffer *head)
+{
+	tomoyo_set_string(head, "\n");
+	return !head->r.w_pos;
 }
 
 /**
@@ -103,874 +188,239 @@
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  * @ptr:  Pointer to "struct tomoyo_name_union".
- *
- * Returns true on success, false otherwise.
  */
-static bool tomoyo_print_name_union(struct tomoyo_io_buffer *head,
-				 const struct tomoyo_name_union *ptr)
+static void tomoyo_print_name_union(struct tomoyo_io_buffer *head,
+				    const struct tomoyo_name_union *ptr)
 {
-	int pos = head->read_avail;
-	if (pos && head->read_buf[pos - 1] == ' ')
-		head->read_avail--;
-	if (ptr->is_group)
-		return tomoyo_io_printf(head, " @%s",
-					ptr->group->group_name->name);
-	return tomoyo_io_printf(head, " %s", ptr->filename->name);
-}
-
-/**
- * tomoyo_is_byte_range - Check whether the string isa \ooo style octal value.
- *
- * @str: Pointer to the string.
- *
- * Returns true if @str is a \ooo style octal value, false otherwise.
- *
- * TOMOYO uses \ooo style representation for 0x01 - 0x20 and 0x7F - 0xFF.
- * This function verifies that \ooo is in valid range.
- */
-static inline bool tomoyo_is_byte_range(const char *str)
-{
-	return *str >= '0' && *str++ <= '3' &&
-		*str >= '0' && *str++ <= '7' &&
-		*str >= '0' && *str <= '7';
-}
-
-/**
- * tomoyo_is_alphabet_char - Check whether the character is an alphabet.
- *
- * @c: The character to check.
- *
- * Returns true if @c is an alphabet character, false otherwise.
- */
-static inline bool tomoyo_is_alphabet_char(const char c)
-{
-	return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z');
-}
-
-/**
- * tomoyo_make_byte - Make byte value from three octal characters.
- *
- * @c1: The first character.
- * @c2: The second character.
- * @c3: The third character.
- *
- * Returns byte value.
- */
-static inline u8 tomoyo_make_byte(const u8 c1, const u8 c2, const u8 c3)
-{
-	return ((c1 - '0') << 6) + ((c2 - '0') << 3) + (c3 - '0');
-}
-
-/**
- * tomoyo_str_starts - Check whether the given string starts with the given keyword.
- *
- * @src:  Pointer to pointer to the string.
- * @find: Pointer to the keyword.
- *
- * Returns true if @src starts with @find, false otherwise.
- *
- * The @src is updated to point the first character after the @find
- * if @src starts with @find.
- */
-static bool tomoyo_str_starts(char **src, const char *find)
-{
-	const int len = strlen(find);
-	char *tmp = *src;
-
-	if (strncmp(tmp, find, len))
-		return false;
-	tmp += len;
-	*src = tmp;
-	return true;
-}
-
-/**
- * tomoyo_normalize_line - Format string.
- *
- * @buffer: The line to normalize.
- *
- * Leading and trailing whitespaces are removed.
- * Multiple whitespaces are packed into single space.
- *
- * Returns nothing.
- */
-static void tomoyo_normalize_line(unsigned char *buffer)
-{
-	unsigned char *sp = buffer;
-	unsigned char *dp = buffer;
-	bool first = true;
-
-	while (tomoyo_is_invalid(*sp))
-		sp++;
-	while (*sp) {
-		if (!first)
-			*dp++ = ' ';
-		first = false;
-		while (tomoyo_is_valid(*sp))
-			*dp++ = *sp++;
-		while (tomoyo_is_invalid(*sp))
-			sp++;
+	tomoyo_set_space(head);
+	if (ptr->is_group) {
+		tomoyo_set_string(head, "@");
+		tomoyo_set_string(head, ptr->group->group_name->name);
+	} else {
+		tomoyo_set_string(head, ptr->filename->name);
 	}
-	*dp = '\0';
 }
 
 /**
- * tomoyo_tokenize - Tokenize string.
+ * tomoyo_print_number_union - Print a tomoyo_number_union.
  *
- * @buffer: The line to tokenize.
- * @w:      Pointer to "char *".
- * @size:   Sizeof @w .
- *
- * Returns true on success, false otherwise.
+ * @head:       Pointer to "struct tomoyo_io_buffer".
+ * @ptr:        Pointer to "struct tomoyo_number_union".
  */
-bool tomoyo_tokenize(char *buffer, char *w[], size_t size)
+static void tomoyo_print_number_union(struct tomoyo_io_buffer *head,
+				      const struct tomoyo_number_union *ptr)
 {
-	int count = size / sizeof(char *);
-	int i;
-	for (i = 0; i < count; i++)
-		w[i] = "";
-	for (i = 0; i < count; i++) {
-		char *cp = strchr(buffer, ' ');
-		if (cp)
-			*cp = '\0';
-		w[i] = buffer;
-		if (!cp)
-			break;
-		buffer = cp + 1;
-	}
-	return i < count || !*buffer;
-}
-
-/**
- * tomoyo_is_correct_path - Validate a pathname.
- * @filename:     The pathname to check.
- * @start_type:   Should the pathname start with '/'?
- *                1 = must / -1 = must not / 0 = don't care
- * @pattern_type: Can the pathname contain a wildcard?
- *                1 = must / -1 = must not / 0 = don't care
- * @end_type:     Should the pathname end with '/'?
- *                1 = must / -1 = must not / 0 = don't care
- *
- * Check whether the given filename follows the naming rules.
- * Returns true if @filename follows the naming rules, false otherwise.
- */
-bool tomoyo_is_correct_path(const char *filename, const s8 start_type,
-			    const s8 pattern_type, const s8 end_type)
-{
-	const char *const start = filename;
-	bool in_repetition = false;
-	bool contains_pattern = false;
-	unsigned char c;
-	unsigned char d;
-	unsigned char e;
-
-	if (!filename)
-		goto out;
-	c = *filename;
-	if (start_type == 1) { /* Must start with '/' */
-		if (c != '/')
-			goto out;
-	} else if (start_type == -1) { /* Must not start with '/' */
-		if (c == '/')
-			goto out;
-	}
-	if (c)
-		c = *(filename + strlen(filename) - 1);
-	if (end_type == 1) { /* Must end with '/' */
-		if (c != '/')
-			goto out;
-	} else if (end_type == -1) { /* Must not end with '/' */
-		if (c == '/')
-			goto out;
-	}
-	while (1) {
-		c = *filename++;
-		if (!c)
-			break;
-		if (c == '\\') {
-			c = *filename++;
-			switch (c) {
-			case '\\':  /* "\\" */
-				continue;
-			case '$':   /* "\$" */
-			case '+':   /* "\+" */
-			case '?':   /* "\?" */
-			case '*':   /* "\*" */
-			case '@':   /* "\@" */
-			case 'x':   /* "\x" */
-			case 'X':   /* "\X" */
-			case 'a':   /* "\a" */
-			case 'A':   /* "\A" */
-			case '-':   /* "\-" */
-				if (pattern_type == -1)
-					break; /* Must not contain pattern */
-				contains_pattern = true;
-				continue;
-			case '{':   /* "/\{" */
-				if (filename - 3 < start ||
-				    *(filename - 3) != '/')
-					break;
-				if (pattern_type == -1)
-					break; /* Must not contain pattern */
-				contains_pattern = true;
-				in_repetition = true;
-				continue;
-			case '}':   /* "\}/" */
-				if (*filename != '/')
-					break;
-				if (!in_repetition)
-					break;
-				in_repetition = false;
-				continue;
-			case '0':   /* "\ooo" */
-			case '1':
-			case '2':
-			case '3':
-				d = *filename++;
-				if (d < '0' || d > '7')
-					break;
-				e = *filename++;
-				if (e < '0' || e > '7')
-					break;
-				c = tomoyo_make_byte(c, d, e);
-				if (tomoyo_is_invalid(c))
-					continue; /* pattern is not \000 */
-			}
-			goto out;
-		} else if (in_repetition && c == '/') {
-			goto out;
-		} else if (tomoyo_is_invalid(c)) {
-			goto out;
-		}
-	}
-	if (pattern_type == 1) { /* Must contain pattern */
-		if (!contains_pattern)
-			goto out;
-	}
-	if (in_repetition)
-		goto out;
-	return true;
- out:
-	return false;
-}
-
-/**
- * tomoyo_is_correct_domain - Check whether the given domainname follows the naming rules.
- * @domainname:   The domainname to check.
- *
- * Returns true if @domainname follows the naming rules, false otherwise.
- */
-bool tomoyo_is_correct_domain(const unsigned char *domainname)
-{
-	unsigned char c;
-	unsigned char d;
-	unsigned char e;
-
-	if (!domainname || strncmp(domainname, TOMOYO_ROOT_NAME,
-				   TOMOYO_ROOT_NAME_LEN))
-		goto out;
-	domainname += TOMOYO_ROOT_NAME_LEN;
-	if (!*domainname)
-		return true;
-	do {
-		if (*domainname++ != ' ')
-			goto out;
-		if (*domainname++ != '/')
-			goto out;
-		while ((c = *domainname) != '\0' && c != ' ') {
-			domainname++;
-			if (c == '\\') {
-				c = *domainname++;
-				switch ((c)) {
-				case '\\':  /* "\\" */
-					continue;
-				case '0':   /* "\ooo" */
-				case '1':
-				case '2':
-				case '3':
-					d = *domainname++;
-					if (d < '0' || d > '7')
-						break;
-					e = *domainname++;
-					if (e < '0' || e > '7')
-						break;
-					c = tomoyo_make_byte(c, d, e);
-					if (tomoyo_is_invalid(c))
-						/* pattern is not \000 */
-						continue;
-				}
-				goto out;
-			} else if (tomoyo_is_invalid(c)) {
-				goto out;
-			}
-		}
-	} while (*domainname);
-	return true;
- out:
-	return false;
-}
-
-/**
- * tomoyo_is_domain_def - Check whether the given token can be a domainname.
- *
- * @buffer: The token to check.
- *
- * Returns true if @buffer possibly be a domainname, false otherwise.
- */
-bool tomoyo_is_domain_def(const unsigned char *buffer)
-{
-	return !strncmp(buffer, TOMOYO_ROOT_NAME, TOMOYO_ROOT_NAME_LEN);
-}
-
-/**
- * tomoyo_find_domain - Find a domain by the given name.
- *
- * @domainname: The domainname to find.
- *
- * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname)
-{
-	struct tomoyo_domain_info *domain;
-	struct tomoyo_path_info name;
-
-	name.name = domainname;
-	tomoyo_fill_path_info(&name);
-	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-		if (!domain->is_deleted &&
-		    !tomoyo_pathcmp(&name, domain->domainname))
-			return domain;
-	}
-	return NULL;
-}
-
-/**
- * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token.
- *
- * @filename: The string to evaluate.
- *
- * Returns the initial length without a pattern in @filename.
- */
-static int tomoyo_const_part_length(const char *filename)
-{
-	char c;
-	int len = 0;
-
-	if (!filename)
-		return 0;
-	while ((c = *filename++) != '\0') {
-		if (c != '\\') {
-			len++;
-			continue;
-		}
-		c = *filename++;
-		switch (c) {
-		case '\\':  /* "\\" */
-			len += 2;
-			continue;
-		case '0':   /* "\ooo" */
-		case '1':
-		case '2':
-		case '3':
-			c = *filename++;
-			if (c < '0' || c > '7')
+	tomoyo_set_space(head);
+	if (ptr->is_group) {
+		tomoyo_set_string(head, "@");
+		tomoyo_set_string(head, ptr->group->group_name->name);
+	} else {
+		int i;
+		unsigned long min = ptr->values[0];
+		const unsigned long max = ptr->values[1];
+		u8 min_type = ptr->min_type;
+		const u8 max_type = ptr->max_type;
+		char buffer[128];
+		buffer[0] = '\0';
+		for (i = 0; i < 2; i++) {
+			switch (min_type) {
+			case TOMOYO_VALUE_TYPE_HEXADECIMAL:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "0x%lX", min);
 				break;
-			c = *filename++;
-			if (c < '0' || c > '7')
+			case TOMOYO_VALUE_TYPE_OCTAL:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "0%lo", min);
 				break;
-			len += 4;
-			continue;
-		}
-		break;
-	}
-	return len;
-}
-
-/**
- * tomoyo_fill_path_info - Fill in "struct tomoyo_path_info" members.
- *
- * @ptr: Pointer to "struct tomoyo_path_info" to fill in.
- *
- * The caller sets "struct tomoyo_path_info"->name.
- */
-void tomoyo_fill_path_info(struct tomoyo_path_info *ptr)
-{
-	const char *name = ptr->name;
-	const int len = strlen(name);
-
-	ptr->const_len = tomoyo_const_part_length(name);
-	ptr->is_dir = len && (name[len - 1] == '/');
-	ptr->is_patterned = (ptr->const_len < len);
-	ptr->hash = full_name_hash(name, len);
-}
-
-/**
- * tomoyo_file_matches_pattern2 - Pattern matching without '/' character
- * and "\-" pattern.
- *
- * @filename:     The start of string to check.
- * @filename_end: The end of string to check.
- * @pattern:      The start of pattern to compare.
- * @pattern_end:  The end of pattern to compare.
- *
- * Returns true if @filename matches @pattern, false otherwise.
- */
-static bool tomoyo_file_matches_pattern2(const char *filename,
-					 const char *filename_end,
-					 const char *pattern,
-					 const char *pattern_end)
-{
-	while (filename < filename_end && pattern < pattern_end) {
-		char c;
-		if (*pattern != '\\') {
-			if (*filename++ != *pattern++)
-				return false;
-			continue;
-		}
-		c = *filename;
-		pattern++;
-		switch (*pattern) {
-			int i;
-			int j;
-		case '?':
-			if (c == '/') {
-				return false;
-			} else if (c == '\\') {
-				if (filename[1] == '\\')
-					filename++;
-				else if (tomoyo_is_byte_range(filename + 1))
-					filename += 3;
-				else
-					return false;
-			}
-			break;
-		case '\\':
-			if (c != '\\')
-				return false;
-			if (*++filename != '\\')
-				return false;
-			break;
-		case '+':
-			if (!isdigit(c))
-				return false;
-			break;
-		case 'x':
-			if (!isxdigit(c))
-				return false;
-			break;
-		case 'a':
-			if (!tomoyo_is_alphabet_char(c))
-				return false;
-			break;
-		case '0':
-		case '1':
-		case '2':
-		case '3':
-			if (c == '\\' && tomoyo_is_byte_range(filename + 1)
-			    && strncmp(filename + 1, pattern, 3) == 0) {
-				filename += 3;
-				pattern += 2;
+			default:
+				tomoyo_addprintf(buffer, sizeof(buffer),
+						 "%lu", min);
 				break;
 			}
-			return false; /* Not matched. */
-		case '*':
-		case '@':
-			for (i = 0; i <= filename_end - filename; i++) {
-				if (tomoyo_file_matches_pattern2(
-						    filename + i, filename_end,
-						    pattern + 1, pattern_end))
-					return true;
-				c = filename[i];
-				if (c == '.' && *pattern == '@')
-					break;
-				if (c != '\\')
-					continue;
-				if (filename[i + 1] == '\\')
-					i++;
-				else if (tomoyo_is_byte_range(filename + i + 1))
-					i += 3;
-				else
-					break; /* Bad pattern. */
-			}
-			return false; /* Not matched. */
-		default:
-			j = 0;
-			c = *pattern;
-			if (c == '$') {
-				while (isdigit(filename[j]))
-					j++;
-			} else if (c == 'X') {
-				while (isxdigit(filename[j]))
-					j++;
-			} else if (c == 'A') {
-				while (tomoyo_is_alphabet_char(filename[j]))
-					j++;
-			}
-			for (i = 1; i <= j; i++) {
-				if (tomoyo_file_matches_pattern2(
-						    filename + i, filename_end,
-						    pattern + 1, pattern_end))
-					return true;
-			}
-			return false; /* Not matched or bad pattern. */
+			if (min == max && min_type == max_type)
+				break;
+			tomoyo_addprintf(buffer, sizeof(buffer), "-");
+			min_type = max_type;
+			min = max;
 		}
-		filename++;
-		pattern++;
+		tomoyo_io_printf(head, "%s", buffer);
 	}
-	while (*pattern == '\\' &&
-	       (*(pattern + 1) == '*' || *(pattern + 1) == '@'))
-		pattern += 2;
-	return filename == filename_end && pattern == pattern_end;
 }
 
 /**
- * tomoyo_file_matches_pattern - Pattern matching without without '/' character.
- *
- * @filename:     The start of string to check.
- * @filename_end: The end of string to check.
- * @pattern:      The start of pattern to compare.
- * @pattern_end:  The end of pattern to compare.
- *
- * Returns true if @filename matches @pattern, false otherwise.
- */
-static bool tomoyo_file_matches_pattern(const char *filename,
-					   const char *filename_end,
-					   const char *pattern,
-					   const char *pattern_end)
-{
-	const char *pattern_start = pattern;
-	bool first = true;
-	bool result;
-
-	while (pattern < pattern_end - 1) {
-		/* Split at "\-" pattern. */
-		if (*pattern++ != '\\' || *pattern++ != '-')
-			continue;
-		result = tomoyo_file_matches_pattern2(filename,
-						      filename_end,
-						      pattern_start,
-						      pattern - 2);
-		if (first)
-			result = !result;
-		if (result)
-			return false;
-		first = false;
-		pattern_start = pattern;
-	}
-	result = tomoyo_file_matches_pattern2(filename, filename_end,
-					      pattern_start, pattern_end);
-	return first ? result : !result;
-}
-
-/**
- * tomoyo_path_matches_pattern2 - Do pathname pattern matching.
- *
- * @f: The start of string to check.
- * @p: The start of pattern to compare.
- *
- * Returns true if @f matches @p, false otherwise.
- */
-static bool tomoyo_path_matches_pattern2(const char *f, const char *p)
-{
-	const char *f_delimiter;
-	const char *p_delimiter;
-
-	while (*f && *p) {
-		f_delimiter = strchr(f, '/');
-		if (!f_delimiter)
-			f_delimiter = f + strlen(f);
-		p_delimiter = strchr(p, '/');
-		if (!p_delimiter)
-			p_delimiter = p + strlen(p);
-		if (*p == '\\' && *(p + 1) == '{')
-			goto recursive;
-		if (!tomoyo_file_matches_pattern(f, f_delimiter, p,
-						 p_delimiter))
-			return false;
-		f = f_delimiter;
-		if (*f)
-			f++;
-		p = p_delimiter;
-		if (*p)
-			p++;
-	}
-	/* Ignore trailing "\*" and "\@" in @pattern. */
-	while (*p == '\\' &&
-	       (*(p + 1) == '*' || *(p + 1) == '@'))
-		p += 2;
-	return !*f && !*p;
- recursive:
-	/*
-	 * The "\{" pattern is permitted only after '/' character.
-	 * This guarantees that below "*(p - 1)" is safe.
-	 * Also, the "\}" pattern is permitted only before '/' character
-	 * so that "\{" + "\}" pair will not break the "\-" operator.
-	 */
-	if (*(p - 1) != '/' || p_delimiter <= p + 3 || *p_delimiter != '/' ||
-	    *(p_delimiter - 1) != '}' || *(p_delimiter - 2) != '\\')
-		return false; /* Bad pattern. */
-	do {
-		/* Compare current component with pattern. */
-		if (!tomoyo_file_matches_pattern(f, f_delimiter, p + 2,
-						 p_delimiter - 2))
-			break;
-		/* Proceed to next component. */
-		f = f_delimiter;
-		if (!*f)
-			break;
-		f++;
-		/* Continue comparison. */
-		if (tomoyo_path_matches_pattern2(f, p_delimiter + 1))
-			return true;
-		f_delimiter = strchr(f, '/');
-	} while (f_delimiter);
-	return false; /* Not matched. */
-}
-
-/**
- * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
- *
- * @filename: The filename to check.
- * @pattern:  The pattern to compare.
- *
- * Returns true if matches, false otherwise.
- *
- * The following patterns are available.
- *   \\     \ itself.
- *   \ooo   Octal representation of a byte.
- *   \*     Zero or more repetitions of characters other than '/'.
- *   \@     Zero or more repetitions of characters other than '/' or '.'.
- *   \?     1 byte character other than '/'.
- *   \$     One or more repetitions of decimal digits.
- *   \+     1 decimal digit.
- *   \X     One or more repetitions of hexadecimal digits.
- *   \x     1 hexadecimal digit.
- *   \A     One or more repetitions of alphabet characters.
- *   \a     1 alphabet character.
- *
- *   \-     Subtraction operator.
- *
- *   /\{dir\}/   '/' + 'One or more repetitions of dir/' (e.g. /dir/ /dir/dir/
- *               /dir/dir/dir/ ).
- */
-bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
-				 const struct tomoyo_path_info *pattern)
-{
-	const char *f = filename->name;
-	const char *p = pattern->name;
-	const int len = pattern->const_len;
-
-	/* If @pattern doesn't contain pattern, I can use strcmp(). */
-	if (!pattern->is_patterned)
-		return !tomoyo_pathcmp(filename, pattern);
-	/* Don't compare directory and non-directory. */
-	if (filename->is_dir != pattern->is_dir)
-		return false;
-	/* Compare the initial length without patterns. */
-	if (strncmp(f, p, len))
-		return false;
-	f += len;
-	p += len;
-	return tomoyo_path_matches_pattern2(f, p);
-}
-
-/**
- * tomoyo_io_printf - Transactional printf() to "struct tomoyo_io_buffer" structure.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @fmt:  The printf()'s format string, followed by parameters.
- *
- * Returns true if output was written, false otherwise.
- *
- * The snprintf() will truncate, but tomoyo_io_printf() won't.
- */
-bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
-{
-	va_list args;
-	int len;
-	int pos = head->read_avail;
-	int size = head->readbuf_size - pos;
-
-	if (size <= 0)
-		return false;
-	va_start(args, fmt);
-	len = vsnprintf(head->read_buf + pos, size, fmt, args);
-	va_end(args);
-	if (pos + len >= head->readbuf_size)
-		return false;
-	head->read_avail += len;
-	return true;
-}
-
-/**
- * tomoyo_get_exe - Get tomoyo_realpath() of current process.
- *
- * Returns the tomoyo_realpath() of current process on success, NULL otherwise.
- *
- * This function uses kzalloc(), so the caller must call kfree()
- * if this function didn't return NULL.
- */
-static const char *tomoyo_get_exe(void)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	const char *cp = NULL;
-
-	if (!mm)
-		return NULL;
-	down_read(&mm->mmap_sem);
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file) {
-			cp = tomoyo_realpath_from_path(&vma->vm_file->f_path);
-			break;
-		}
-	}
-	up_read(&mm->mmap_sem);
-	return cp;
-}
-
-/**
- * tomoyo_get_msg - Get warning message.
- *
- * @is_enforce: Is it enforcing mode?
- *
- * Returns "ERROR" or "WARNING".
- */
-const char *tomoyo_get_msg(const bool is_enforce)
-{
-	if (is_enforce)
-		return "ERROR";
-	else
-		return "WARNING";
-}
-
-/**
- * tomoyo_check_flags - Check mode for specified functionality.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- * @index:  The functionality to check mode.
- *
- * TOMOYO checks only process context.
- * This code disables TOMOYO's enforcement in case the function is called from
- * interrupt context.
- */
-unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain,
-				const u8 index)
-{
-	const u8 profile = domain->profile;
-
-	if (WARN_ON(in_interrupt()))
-		return 0;
-	return tomoyo_policy_loaded && index < TOMOYO_MAX_CONTROL_INDEX
-#if TOMOYO_MAX_PROFILES != 256
-		&& profile < TOMOYO_MAX_PROFILES
-#endif
-		&& tomoyo_profile_ptr[profile] ?
-		tomoyo_profile_ptr[profile]->value[index] : 0;
-}
-
-/**
- * tomoyo_verbose_mode - Check whether TOMOYO is verbose mode.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns true if domain policy violation warning should be printed to
- * console.
- */
-bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain)
-{
-	return tomoyo_check_flags(domain, TOMOYO_VERBOSE) != 0;
-}
-
-/**
- * tomoyo_domain_quota_is_ok - Check for domain's quota.
- *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns true if the domain is not exceeded quota, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain)
-{
-	unsigned int count = 0;
-	struct tomoyo_acl_info *ptr;
-
-	if (!domain)
-		return true;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		switch (ptr->type) {
-			struct tomoyo_path_acl *acl;
-			u32 perm;
-			u8 i;
-		case TOMOYO_TYPE_PATH_ACL:
-			acl = container_of(ptr, struct tomoyo_path_acl, head);
-			perm = acl->perm | (((u32) acl->perm_high) << 16);
-			for (i = 0; i < TOMOYO_MAX_PATH_OPERATION; i++)
-				if (perm & (1 << i))
-					count++;
-			if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
-				count -= 2;
-			break;
-		case TOMOYO_TYPE_PATH2_ACL:
-			perm = container_of(ptr, struct tomoyo_path2_acl, head)
-				->perm;
-			for (i = 0; i < TOMOYO_MAX_PATH2_OPERATION; i++)
-				if (perm & (1 << i))
-					count++;
-			break;
-		}
-	}
-	if (count < tomoyo_check_flags(domain, TOMOYO_MAX_ACCEPT_ENTRY))
-		return true;
-	if (!domain->quota_warned) {
-		domain->quota_warned = true;
-		printk(KERN_WARNING "TOMOYO-WARNING: "
-		       "Domain '%s' has so many ACLs to hold. "
-		       "Stopped learning mode.\n", domain->domainname->name);
-	}
-	return false;
-}
-
-/**
- * tomoyo_find_or_assign_new_profile - Create a new profile.
+ * tomoyo_assign_profile - Create a new profile.
  *
  * @profile: Profile number to create.
  *
  * Returns pointer to "struct tomoyo_profile" on success, NULL otherwise.
  */
-static struct tomoyo_profile *tomoyo_find_or_assign_new_profile(const unsigned
-								int profile)
+static struct tomoyo_profile *tomoyo_assign_profile(const unsigned int profile)
 {
-	struct tomoyo_profile *ptr = NULL;
-	int i;
-
+	struct tomoyo_profile *ptr;
+	struct tomoyo_profile *entry;
 	if (profile >= TOMOYO_MAX_PROFILES)
 		return NULL;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		return NULL;
 	ptr = tomoyo_profile_ptr[profile];
 	if (ptr)
-		goto ok;
-	ptr = kmalloc(sizeof(*ptr), GFP_NOFS);
-	if (!tomoyo_memory_ok(ptr)) {
-		kfree(ptr);
-		ptr = NULL;
-		goto ok;
+		return ptr;
+	entry = kzalloc(sizeof(*entry), GFP_NOFS);
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		goto out;
+	ptr = tomoyo_profile_ptr[profile];
+	if (!ptr && tomoyo_memory_ok(entry)) {
+		ptr = entry;
+		ptr->learning = &tomoyo_default_profile.preference;
+		ptr->permissive = &tomoyo_default_profile.preference;
+		ptr->enforcing = &tomoyo_default_profile.preference;
+		ptr->default_config = TOMOYO_CONFIG_DISABLED;
+		memset(ptr->config, TOMOYO_CONFIG_USE_DEFAULT,
+		       sizeof(ptr->config));
+		mb(); /* Avoid out-of-order execution. */
+		tomoyo_profile_ptr[profile] = ptr;
+		entry = NULL;
 	}
-	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++)
-		ptr->value[i] = tomoyo_control_array[i].current_value;
-	mb(); /* Avoid out-of-order execution. */
-	tomoyo_profile_ptr[profile] = ptr;
- ok:
 	mutex_unlock(&tomoyo_policy_lock);
+ out:
+	kfree(entry);
 	return ptr;
 }
 
 /**
- * tomoyo_write_profile - Write to profile table.
+ * tomoyo_profile - Find a profile.
+ *
+ * @profile: Profile number to find.
+ *
+ * Returns pointer to "struct tomoyo_profile".
+ */
+struct tomoyo_profile *tomoyo_profile(const u8 profile)
+{
+	struct tomoyo_profile *ptr = tomoyo_profile_ptr[profile];
+	if (!tomoyo_policy_loaded)
+		return &tomoyo_default_profile;
+	BUG_ON(!ptr);
+	return ptr;
+}
+
+static s8 tomoyo_find_yesno(const char *string, const char *find)
+{
+	const char *cp = strstr(string, find);
+	if (cp) {
+		cp += strlen(find);
+		if (!strncmp(cp, "=yes", 4))
+			return 1;
+		else if (!strncmp(cp, "=no", 3))
+			return 0;
+	}
+	return -1;
+}
+
+static void tomoyo_set_bool(bool *b, const char *string, const char *find)
+{
+	switch (tomoyo_find_yesno(string, find)) {
+	case 1:
+		*b = true;
+		break;
+	case 0:
+		*b = false;
+		break;
+	}
+}
+
+static void tomoyo_set_uint(unsigned int *i, const char *string,
+			    const char *find)
+{
+	const char *cp = strstr(string, find);
+	if (cp)
+		sscanf(cp + strlen(find), "=%u", i);
+}
+
+static void tomoyo_set_pref(const char *name, const char *value,
+			    const bool use_default,
+			    struct tomoyo_profile *profile)
+{
+	struct tomoyo_preference **pref;
+	bool *verbose;
+	if (!strcmp(name, "enforcing")) {
+		if (use_default) {
+			pref = &profile->enforcing;
+			goto set_default;
+		}
+		profile->enforcing = &profile->preference;
+		verbose = &profile->preference.enforcing_verbose;
+		goto set_verbose;
+	}
+	if (!strcmp(name, "permissive")) {
+		if (use_default) {
+			pref = &profile->permissive;
+			goto set_default;
+		}
+		profile->permissive = &profile->preference;
+		verbose = &profile->preference.permissive_verbose;
+		goto set_verbose;
+	}
+	if (!strcmp(name, "learning")) {
+		if (use_default) {
+			pref = &profile->learning;
+			goto set_default;
+		}
+		profile->learning = &profile->preference;
+		tomoyo_set_uint(&profile->preference.learning_max_entry, value,
+			     "max_entry");
+		verbose = &profile->preference.learning_verbose;
+		goto set_verbose;
+	}
+	return;
+ set_default:
+	*pref = &tomoyo_default_profile.preference;
+	return;
+ set_verbose:
+	tomoyo_set_bool(verbose, value, "verbose");
+}
+
+static int tomoyo_set_mode(char *name, const char *value,
+			   const bool use_default,
+			   struct tomoyo_profile *profile)
+{
+	u8 i;
+	u8 config;
+	if (!strcmp(name, "CONFIG")) {
+		i = TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX;
+		config = profile->default_config;
+	} else if (tomoyo_str_starts(&name, "CONFIG::")) {
+		config = 0;
+		for (i = 0; i < TOMOYO_MAX_MAC_INDEX
+			     + TOMOYO_MAX_MAC_CATEGORY_INDEX; i++) {
+			if (strcmp(name, tomoyo_mac_keywords[i]))
+				continue;
+			config = profile->config[i];
+			break;
+		}
+		if (i == TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX)
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+	if (use_default) {
+		config = TOMOYO_CONFIG_USE_DEFAULT;
+	} else {
+		u8 mode;
+		for (mode = 0; mode < 4; mode++)
+			if (strstr(value, tomoyo_mode[mode]))
+				/*
+				 * Update lower 3 bits in order to distinguish
+				 * 'config' from 'TOMOYO_CONFIG_USE_DEAFULT'.
+				 */
+				config = (config & ~7) | mode;
+	}
+	if (i < TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX)
+		profile->config[i] = config;
+	else if (config != TOMOYO_CONFIG_USE_DEFAULT)
+		profile->default_config = config;
+	return 0;
+}
+
+/**
+ * tomoyo_write_profile - Write profile table.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -980,153 +430,165 @@
 {
 	char *data = head->write_buf;
 	unsigned int i;
-	unsigned int value;
+	bool use_default = false;
 	char *cp;
 	struct tomoyo_profile *profile;
-	unsigned long num;
-
-	cp = strchr(data, '-');
-	if (cp)
-		*cp = '\0';
-	if (strict_strtoul(data, 10, &num))
-		return -EINVAL;
-	if (cp)
+	if (sscanf(data, "PROFILE_VERSION=%u", &tomoyo_profile_version) == 1)
+		return 0;
+	i = simple_strtoul(data, &cp, 10);
+	if (data == cp) {
+		profile = &tomoyo_default_profile;
+	} else {
+		if (*cp != '-')
+			return -EINVAL;
 		data = cp + 1;
-	profile = tomoyo_find_or_assign_new_profile(num);
-	if (!profile)
-		return -EINVAL;
+		profile = tomoyo_assign_profile(i);
+		if (!profile)
+			return -EINVAL;
+	}
 	cp = strchr(data, '=');
 	if (!cp)
 		return -EINVAL;
-	*cp = '\0';
+	*cp++ = '\0';
+	if (profile != &tomoyo_default_profile)
+		use_default = strstr(cp, "use_default") != NULL;
+	if (tomoyo_str_starts(&data, "PREFERENCE::")) {
+		tomoyo_set_pref(data, cp, use_default, profile);
+		return 0;
+	}
+	if (profile == &tomoyo_default_profile)
+		return -EINVAL;
 	if (!strcmp(data, "COMMENT")) {
 		const struct tomoyo_path_info *old_comment = profile->comment;
-		profile->comment = tomoyo_get_name(cp + 1);
+		profile->comment = tomoyo_get_name(cp);
 		tomoyo_put_name(old_comment);
 		return 0;
 	}
-	for (i = 0; i < TOMOYO_MAX_CONTROL_INDEX; i++) {
-		if (strcmp(data, tomoyo_control_array[i].keyword))
-			continue;
-		if (sscanf(cp + 1, "%u", &value) != 1) {
-			int j;
-			const char **modes;
-			switch (i) {
-			case TOMOYO_VERBOSE:
-				modes = tomoyo_mode_2;
-				break;
-			default:
-				modes = tomoyo_mode_4;
-				break;
-			}
-			for (j = 0; j < 4; j++) {
-				if (strcmp(cp + 1, modes[j]))
-					continue;
-				value = j;
-				break;
-			}
-			if (j == 4)
-				return -EINVAL;
-		} else if (value > tomoyo_control_array[i].max_value) {
-			value = tomoyo_control_array[i].max_value;
-		}
-		profile->value[i] = value;
-		return 0;
+	return tomoyo_set_mode(data, cp, use_default, profile);
+}
+
+static void tomoyo_print_preference(struct tomoyo_io_buffer *head,
+				    const int idx)
+{
+	struct tomoyo_preference *pref = &tomoyo_default_profile.preference;
+	const struct tomoyo_profile *profile = idx >= 0 ?
+		tomoyo_profile_ptr[idx] : NULL;
+	char buffer[16] = "";
+	if (profile) {
+		buffer[sizeof(buffer) - 1] = '\0';
+		snprintf(buffer, sizeof(buffer) - 1, "%u-", idx);
 	}
-	return -EINVAL;
+	if (profile) {
+		pref = profile->learning;
+		if (pref == &tomoyo_default_profile.preference)
+			goto skip1;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ "
+			 "verbose=%s max_entry=%u }\n",
+			 buffer, "learning",
+			 tomoyo_yesno(pref->learning_verbose),
+			 pref->learning_max_entry);
+ skip1:
+	if (profile) {
+		pref = profile->permissive;
+		if (pref == &tomoyo_default_profile.preference)
+			goto skip2;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ verbose=%s }\n",
+			 buffer, "permissive",
+			 tomoyo_yesno(pref->permissive_verbose));
+ skip2:
+	if (profile) {
+		pref = profile->enforcing;
+		if (pref == &tomoyo_default_profile.preference)
+			return;
+	}
+	tomoyo_io_printf(head, "%sPREFERENCE::%s={ verbose=%s }\n",
+			 buffer, "enforcing",
+			 tomoyo_yesno(pref->enforcing_verbose));
+}
+
+static void tomoyo_print_config(struct tomoyo_io_buffer *head, const u8 config)
+{
+	tomoyo_io_printf(head, "={ mode=%s }\n", tomoyo_mode[config & 3]);
 }
 
 /**
- * tomoyo_read_profile - Read from profile table.
+ * tomoyo_read_profile - Read profile table.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns 0.
  */
-static int tomoyo_read_profile(struct tomoyo_io_buffer *head)
+static void tomoyo_read_profile(struct tomoyo_io_buffer *head)
 {
-	static const int total = TOMOYO_MAX_CONTROL_INDEX + 1;
-	int step;
-
-	if (head->read_eof)
-		return 0;
-	for (step = head->read_step; step < TOMOYO_MAX_PROFILES * total;
-	     step++) {
-		const u8 index = step / total;
-		u8 type = step % total;
-		const struct tomoyo_profile *profile
-			= tomoyo_profile_ptr[index];
-		head->read_step = step;
-		if (!profile)
-			continue;
-		if (!type) { /* Print profile' comment tag. */
-			if (!tomoyo_io_printf(head, "%u-COMMENT=%s\n",
-					      index, profile->comment ?
-					      profile->comment->name : ""))
+	u8 index;
+	const struct tomoyo_profile *profile;
+ next:
+	index = head->r.index;
+	profile = tomoyo_profile_ptr[index];
+	switch (head->r.step) {
+	case 0:
+		tomoyo_io_printf(head, "PROFILE_VERSION=%s\n", "20090903");
+		tomoyo_print_preference(head, -1);
+		head->r.step++;
+		break;
+	case 1:
+		for ( ; head->r.index < TOMOYO_MAX_PROFILES;
+		      head->r.index++)
+			if (tomoyo_profile_ptr[head->r.index])
 				break;
-			continue;
+		if (head->r.index == TOMOYO_MAX_PROFILES)
+			return;
+		head->r.step++;
+		break;
+	case 2:
+		{
+			const struct tomoyo_path_info *comment =
+				profile->comment;
+			tomoyo_io_printf(head, "%u-COMMENT=", index);
+			tomoyo_set_string(head, comment ? comment->name : "");
+			tomoyo_set_lf(head);
+			head->r.step++;
 		}
-		type--;
-		if (type < TOMOYO_MAX_CONTROL_INDEX) {
-			const unsigned int value = profile->value[type];
-			const char **modes = NULL;
-			const char *keyword
-				= tomoyo_control_array[type].keyword;
-			switch (tomoyo_control_array[type].max_value) {
-			case 3:
-				modes = tomoyo_mode_4;
-				break;
-			case 1:
-				modes = tomoyo_mode_2;
-				break;
-			}
-			if (modes) {
-				if (!tomoyo_io_printf(head, "%u-%s=%s\n", index,
-						      keyword, modes[value]))
-					break;
-			} else {
-				if (!tomoyo_io_printf(head, "%u-%s=%u\n", index,
-						      keyword, value))
-					break;
-			}
+		break;
+	case 3:
+		{
+			tomoyo_io_printf(head, "%u-%s", index, "CONFIG");
+			tomoyo_print_config(head, profile->default_config);
+			head->r.bit = 0;
+			head->r.step++;
 		}
+		break;
+	case 4:
+		for ( ; head->r.bit < TOMOYO_MAX_MAC_INDEX
+			      + TOMOYO_MAX_MAC_CATEGORY_INDEX; head->r.bit++) {
+			const u8 i = head->r.bit;
+			const u8 config = profile->config[i];
+			if (config == TOMOYO_CONFIG_USE_DEFAULT)
+				continue;
+			tomoyo_io_printf(head, "%u-%s%s", index, "CONFIG::",
+					 tomoyo_mac_keywords[i]);
+			tomoyo_print_config(head, config);
+			head->r.bit++;
+			break;
+		}
+		if (head->r.bit == TOMOYO_MAX_MAC_INDEX
+		    + TOMOYO_MAX_MAC_CATEGORY_INDEX) {
+			tomoyo_print_preference(head, index);
+			head->r.index++;
+			head->r.step = 1;
+		}
+		break;
 	}
-	if (step == TOMOYO_MAX_PROFILES * total)
-		head->read_eof = true;
-	return 0;
+	if (tomoyo_flush(head))
+		goto next;
 }
 
-/*
- * tomoyo_policy_manager_list is used for holding list of domainnames or
- * programs which are permitted to modify configuration via
- * /sys/kernel/security/tomoyo/ interface.
- *
- * An entry is added by
- *
- * # echo '<kernel> /sbin/mingetty /bin/login /bin/bash' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *  (if you want to specify by a domainname)
- *
- *  or
- *
- * # echo '/usr/lib/ccs/editpolicy' > /sys/kernel/security/tomoyo/manager
- *  (if you want to specify by a program's location)
- *
- * and is deleted by
- *
- * # echo 'delete <kernel> /sbin/mingetty /bin/login /bin/bash' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *
- *  or
- *
- * # echo 'delete /usr/lib/ccs/editpolicy' > \
- *                                        /sys/kernel/security/tomoyo/manager
- *
- * and all entries are retrieved by
- *
- * # cat /sys/kernel/security/tomoyo/manager
- */
-LIST_HEAD(tomoyo_policy_manager_list);
+static bool tomoyo_same_manager(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_manager, head)->manager ==
+		container_of(b, struct tomoyo_manager, head)->manager;
+}
 
 /**
  * tomoyo_update_manager_entry - Add a manager entry.
@@ -1141,47 +603,29 @@
 static int tomoyo_update_manager_entry(const char *manager,
 				       const bool is_delete)
 {
-	struct tomoyo_policy_manager_entry *ptr;
-	struct tomoyo_policy_manager_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_manager e = { };
+	int error;
 
-	if (tomoyo_is_domain_def(manager)) {
-		if (!tomoyo_is_correct_domain(manager))
+	if (tomoyo_domain_def(manager)) {
+		if (!tomoyo_correct_domain(manager))
 			return -EINVAL;
 		e.is_domain = true;
 	} else {
-		if (!tomoyo_is_correct_path(manager, 1, -1, -1))
+		if (!tomoyo_correct_path(manager))
 			return -EINVAL;
 	}
 	e.manager = tomoyo_get_name(manager);
 	if (!e.manager)
 		return -ENOMEM;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (ptr->manager != e.manager)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_policy_manager_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_policy_manager_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				     tomoyo_same_manager);
 	tomoyo_put_name(e.manager);
 	return error;
 }
 
 /**
- * tomoyo_write_manager_policy - Write manager policy.
+ * tomoyo_write_manager - Write manager policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1189,7 +633,7 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_manager_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_manager(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE);
@@ -1202,47 +646,41 @@
 }
 
 /**
- * tomoyo_read_manager_policy - Read manager policy.
+ * tomoyo_read_manager - Read manager policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
- * Returns 0.
- *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_manager_policy(struct tomoyo_io_buffer *head)
+static void tomoyo_read_manager(struct tomoyo_io_buffer *head)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_policy_manager_list) {
-		struct tomoyo_policy_manager_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_policy_manager_entry,
-				 list);
-		if (ptr->is_deleted)
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.acl,
+			     &tomoyo_policy_list[TOMOYO_ID_MANAGER]) {
+		struct tomoyo_manager *ptr =
+			list_entry(head->r.acl, typeof(*ptr), head.list);
+		if (ptr->head.is_deleted)
 			continue;
-		done = tomoyo_io_printf(head, "%s\n", ptr->manager->name);
-		if (!done)
-			break;
+		if (!tomoyo_flush(head))
+			return;
+		tomoyo_set_string(head, ptr->manager->name);
+		tomoyo_set_lf(head);
 	}
-	head->read_eof = done;
-	return 0;
+	head->r.eof = true;
 }
 
 /**
- * tomoyo_is_policy_manager - Check whether the current process is a policy manager.
+ * tomoyo_manager - Check whether the current process is a policy manager.
  *
  * Returns true if the current process is permitted to modify policy
  * via /sys/kernel/security/tomoyo/ interface.
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_policy_manager(void)
+static bool tomoyo_manager(void)
 {
-	struct tomoyo_policy_manager_entry *ptr;
+	struct tomoyo_manager *ptr;
 	const char *exe;
 	const struct task_struct *task = current;
 	const struct tomoyo_path_info *domainname = tomoyo_domain()->domainname;
@@ -1252,8 +690,9 @@
 		return true;
 	if (!tomoyo_manage_by_non_root && (task->cred->uid || task->cred->euid))
 		return false;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (!ptr->is_deleted && ptr->is_domain
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				head.list) {
+		if (!ptr->head.is_deleted && ptr->is_domain
 		    && !tomoyo_pathcmp(domainname, ptr->manager)) {
 			found = true;
 			break;
@@ -1264,8 +703,9 @@
 	exe = tomoyo_get_exe();
 	if (!exe)
 		return false;
-	list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list, list) {
-		if (!ptr->is_deleted && !ptr->is_domain
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_MANAGER],
+				head.list) {
+		if (!ptr->head.is_deleted && !ptr->is_domain
 		    && !strcmp(exe, ptr->manager->name)) {
 			found = true;
 			break;
@@ -1285,7 +725,7 @@
 }
 
 /**
- * tomoyo_is_select_one - Parse select command.
+ * tomoyo_select_one - Parse select command.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  * @data: String to parse.
@@ -1294,23 +734,31 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_select_one(struct tomoyo_io_buffer *head,
-				 const char *data)
+static bool tomoyo_select_one(struct tomoyo_io_buffer *head, const char *data)
 {
 	unsigned int pid;
 	struct tomoyo_domain_info *domain = NULL;
+	bool global_pid = false;
 
-	if (sscanf(data, "pid=%u", &pid) == 1) {
+	if (!strcmp(data, "allow_execute")) {
+		head->r.print_execute_only = true;
+		return true;
+	}
+	if (sscanf(data, "pid=%u", &pid) == 1 ||
+	    (global_pid = true, sscanf(data, "global-pid=%u", &pid) == 1)) {
 		struct task_struct *p;
 		rcu_read_lock();
 		read_lock(&tasklist_lock);
-		p = find_task_by_vpid(pid);
+		if (global_pid)
+			p = find_task_by_pid_ns(pid, &init_pid_ns);
+		else
+			p = find_task_by_vpid(pid);
 		if (p)
 			domain = tomoyo_real_domain(p);
 		read_unlock(&tasklist_lock);
 		rcu_read_unlock();
 	} else if (!strncmp(data, "domain=", 7)) {
-		if (tomoyo_is_domain_def(data + 7))
+		if (tomoyo_domain_def(data + 7))
 			domain = tomoyo_find_domain(data + 7);
 	} else
 		return false;
@@ -1318,24 +766,13 @@
 	/* Accessing read_buf is safe because head->io_sem is held. */
 	if (!head->read_buf)
 		return true; /* Do nothing if open(O_WRONLY). */
-	head->read_avail = 0;
+	memset(&head->r, 0, sizeof(head->r));
+	head->r.print_this_domain_only = true;
+	head->r.eof = !domain;
+	head->r.domain = &domain->list;
 	tomoyo_io_printf(head, "# select %s\n", data);
-	head->read_single_domain = true;
-	head->read_eof = !domain;
-	if (domain) {
-		struct tomoyo_domain_info *d;
-		head->read_var1 = NULL;
-		list_for_each_entry_rcu(d, &tomoyo_domain_list, list) {
-			if (d == domain)
-				break;
-			head->read_var1 = &d->list;
-		}
-		head->read_var2 = NULL;
-		head->read_bit = 0;
-		head->read_step = 0;
-		if (domain->is_deleted)
-			tomoyo_io_printf(head, "# This is a deleted domain.\n");
-	}
+	if (domain && domain->is_deleted)
+		tomoyo_io_printf(head, "# This is a deleted domain.\n");
 	return true;
 }
 
@@ -1373,7 +810,7 @@
 }
 
 /**
- * tomoyo_write_domain_policy - Write domain policy.
+ * tomoyo_write_domain2 - Write domain policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1381,7 +818,24 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_domain_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_domain2(char *data, struct tomoyo_domain_info *domain,
+				const bool is_delete)
+{
+	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALLOW_MOUNT))
+		return tomoyo_write_mount(data, domain, is_delete);
+	return tomoyo_write_file(data, domain, is_delete);
+}
+
+/**
+ * tomoyo_write_domain - Write domain policy.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static int tomoyo_write_domain(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	struct tomoyo_domain_info *domain = head->write_var1;
@@ -1393,19 +847,19 @@
 		is_delete = true;
 	else if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_SELECT))
 		is_select = true;
-	if (is_select && tomoyo_is_select_one(head, data))
+	if (is_select && tomoyo_select_one(head, data))
 		return 0;
 	/* Don't allow updating policies by non manager programs. */
-	if (!tomoyo_is_policy_manager())
+	if (!tomoyo_manager())
 		return -EPERM;
-	if (tomoyo_is_domain_def(data)) {
+	if (tomoyo_domain_def(data)) {
 		domain = NULL;
 		if (is_delete)
 			tomoyo_delete_domain(data);
 		else if (is_select)
 			domain = tomoyo_find_domain(data);
 		else
-			domain = tomoyo_find_or_assign_new_domain(data, 0);
+			domain = tomoyo_assign_domain(data, 0);
 		head->write_var1 = domain;
 		return 0;
 	}
@@ -1422,179 +876,198 @@
 		domain->ignore_global_allow_read = !is_delete;
 		return 0;
 	}
-	return tomoyo_write_file_policy(data, domain, is_delete);
+	if (!strcmp(data, TOMOYO_KEYWORD_QUOTA_EXCEEDED)) {
+		domain->quota_warned = !is_delete;
+		return 0;
+	}
+	if (!strcmp(data, TOMOYO_KEYWORD_TRANSITION_FAILED)) {
+		domain->transition_failed = !is_delete;
+		return 0;
+	}
+	return tomoyo_write_domain2(data, domain, is_delete);
 }
 
 /**
- * tomoyo_print_path_acl - Print a single path ACL entry.
+ * tomoyo_fns - Find next set bit.
  *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to "struct tomoyo_path_acl".
+ * @perm: 8 bits value.
+ * @bit:  First bit to find.
  *
- * Returns true on success, false otherwise.
+ * Returns next on-bit on success, 8 otherwise.
  */
-static bool tomoyo_print_path_acl(struct tomoyo_io_buffer *head,
-				  struct tomoyo_path_acl *ptr)
+static u8 tomoyo_fns(const u8 perm, u8 bit)
 {
-	int pos;
-	u8 bit;
-	const u32 perm = ptr->perm | (((u32) ptr->perm_high) << 16);
-
-	for (bit = head->read_bit; bit < TOMOYO_MAX_PATH_OPERATION; bit++) {
-		if (!(perm & (1 << bit)))
-			continue;
-		/* Print "read/write" instead of "read" and "write". */
-		if ((bit == TOMOYO_TYPE_READ || bit == TOMOYO_TYPE_WRITE)
-		    && (perm & (1 << TOMOYO_TYPE_READ_WRITE)))
-			continue;
-		pos = head->read_avail;
-		if (!tomoyo_io_printf(head, "allow_%s ",
-				      tomoyo_path2keyword(bit)) ||
-		    !tomoyo_print_name_union(head, &ptr->name) ||
-		    !tomoyo_io_printf(head, "\n"))
-			goto out;
-	}
-	head->read_bit = 0;
-	return true;
- out:
-	head->read_bit = bit;
-	head->read_avail = pos;
-	return false;
-}
-
-/**
- * tomoyo_print_path2_acl - Print a double path ACL entry.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to "struct tomoyo_path2_acl".
- *
- * Returns true on success, false otherwise.
- */
-static bool tomoyo_print_path2_acl(struct tomoyo_io_buffer *head,
-				   struct tomoyo_path2_acl *ptr)
-{
-	int pos;
-	const u8 perm = ptr->perm;
-	u8 bit;
-
-	for (bit = head->read_bit; bit < TOMOYO_MAX_PATH2_OPERATION; bit++) {
-		if (!(perm & (1 << bit)))
-			continue;
-		pos = head->read_avail;
-		if (!tomoyo_io_printf(head, "allow_%s ",
-				      tomoyo_path22keyword(bit)) ||
-		    !tomoyo_print_name_union(head, &ptr->name1) ||
-		    !tomoyo_print_name_union(head, &ptr->name2) ||
-		    !tomoyo_io_printf(head, "\n"))
-			goto out;
-	}
-	head->read_bit = 0;
-	return true;
- out:
-	head->read_bit = bit;
-	head->read_avail = pos;
-	return false;
+	for ( ; bit < 8; bit++)
+		if (perm & (1 << bit))
+			break;
+	return bit;
 }
 
 /**
  * tomoyo_print_entry - Print an ACL entry.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
- * @ptr:  Pointer to an ACL entry.
+ * @acl:  Pointer to an ACL entry.
  *
  * Returns true on success, false otherwise.
  */
 static bool tomoyo_print_entry(struct tomoyo_io_buffer *head,
-			       struct tomoyo_acl_info *ptr)
+			       struct tomoyo_acl_info *acl)
 {
-	const u8 acl_type = ptr->type;
+	const u8 acl_type = acl->type;
+	u8 bit;
 
-	if (acl_type == TOMOYO_TYPE_PATH_ACL) {
-		struct tomoyo_path_acl *acl
-			= container_of(ptr, struct tomoyo_path_acl, head);
-		return tomoyo_print_path_acl(head, acl);
+	if (acl->is_deleted)
+		return true;
+ next:
+	bit = head->r.bit;
+	if (!tomoyo_flush(head))
+		return false;
+	else if (acl_type == TOMOYO_TYPE_PATH_ACL) {
+		struct tomoyo_path_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		const u16 perm = ptr->perm;
+		for ( ; bit < TOMOYO_MAX_PATH_OPERATION; bit++) {
+			if (!(perm & (1 << bit)))
+				continue;
+			if (head->r.print_execute_only &&
+			    bit != TOMOYO_TYPE_EXECUTE)
+				continue;
+			/* Print "read/write" instead of "read" and "write". */
+			if ((bit == TOMOYO_TYPE_READ ||
+			     bit == TOMOYO_TYPE_WRITE)
+			    && (perm & (1 << TOMOYO_TYPE_READ_WRITE)))
+				continue;
+			break;
+		}
+		if (bit >= TOMOYO_MAX_PATH_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_path_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+	} else if (head->r.print_execute_only) {
+		return true;
+	} else if (acl_type == TOMOYO_TYPE_PATH2_ACL) {
+		struct tomoyo_path2_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_PATH2_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_path2_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name1);
+		tomoyo_print_name_union(head, &ptr->name2);
+	} else if (acl_type == TOMOYO_TYPE_PATH_NUMBER_ACL) {
+		struct tomoyo_path_number_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_PATH_NUMBER_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s",
+				 tomoyo_path_number_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+		tomoyo_print_number_union(head, &ptr->number);
+	} else if (acl_type == TOMOYO_TYPE_MKDEV_ACL) {
+		struct tomoyo_mkdev_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		bit = tomoyo_fns(ptr->perm, bit);
+		if (bit >= TOMOYO_MAX_MKDEV_OPERATION)
+			goto done;
+		tomoyo_io_printf(head, "allow_%s", tomoyo_mkdev_keyword[bit]);
+		tomoyo_print_name_union(head, &ptr->name);
+		tomoyo_print_number_union(head, &ptr->mode);
+		tomoyo_print_number_union(head, &ptr->major);
+		tomoyo_print_number_union(head, &ptr->minor);
+	} else if (acl_type == TOMOYO_TYPE_MOUNT_ACL) {
+		struct tomoyo_mount_acl *ptr =
+			container_of(acl, typeof(*ptr), head);
+		tomoyo_io_printf(head, "allow_mount");
+		tomoyo_print_name_union(head, &ptr->dev_name);
+		tomoyo_print_name_union(head, &ptr->dir_name);
+		tomoyo_print_name_union(head, &ptr->fs_type);
+		tomoyo_print_number_union(head, &ptr->flags);
 	}
-	if (acl_type == TOMOYO_TYPE_PATH2_ACL) {
-		struct tomoyo_path2_acl *acl
-			= container_of(ptr, struct tomoyo_path2_acl, head);
-		return tomoyo_print_path2_acl(head, acl);
-	}
-	BUG(); /* This must not happen. */
-	return false;
+	head->r.bit = bit + 1;
+	tomoyo_io_printf(head, "\n");
+	if (acl_type != TOMOYO_TYPE_MOUNT_ACL)
+		goto next;
+ done:
+	head->r.bit = 0;
+	return true;
 }
 
 /**
- * tomoyo_read_domain_policy - Read domain policy.
+ * tomoyo_read_domain2 - Read domain policy.
+ *
+ * @head:   Pointer to "struct tomoyo_io_buffer".
+ * @domain: Pointer to "struct tomoyo_domain_info".
+ *
+ * Caller holds tomoyo_read_lock().
+ *
+ * Returns true on success, false otherwise.
+ */
+static bool tomoyo_read_domain2(struct tomoyo_io_buffer *head,
+				struct tomoyo_domain_info *domain)
+{
+	list_for_each_cookie(head->r.acl, &domain->acl_info_list) {
+		struct tomoyo_acl_info *ptr =
+			list_entry(head->r.acl, typeof(*ptr), list);
+		if (!tomoyo_print_entry(head, ptr))
+			return false;
+	}
+	head->r.acl = NULL;
+	return true;
+}
+
+/**
+ * tomoyo_read_domain - Read domain policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
- * Returns 0.
- *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_domain_policy(struct tomoyo_io_buffer *head)
+static void tomoyo_read_domain(struct tomoyo_io_buffer *head)
 {
-	struct list_head *dpos;
-	struct list_head *apos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	if (head->read_step == 0)
-		head->read_step = 1;
-	list_for_each_cookie(dpos, head->read_var1, &tomoyo_domain_list) {
-		struct tomoyo_domain_info *domain;
-		const char *quota_exceeded = "";
-		const char *transition_failed = "";
-		const char *ignore_global_allow_read = "";
-		domain = list_entry(dpos, struct tomoyo_domain_info, list);
-		if (head->read_step != 1)
-			goto acl_loop;
-		if (domain->is_deleted && !head->read_single_domain)
-			continue;
-		/* Print domainname and flags. */
-		if (domain->quota_warned)
-			quota_exceeded = "quota_exceeded\n";
-		if (domain->transition_failed)
-			transition_failed = "transition_failed\n";
-		if (domain->ignore_global_allow_read)
-			ignore_global_allow_read
-				= TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ "\n";
-		done = tomoyo_io_printf(head, "%s\n" TOMOYO_KEYWORD_USE_PROFILE
-					"%u\n%s%s%s\n",
-					domain->domainname->name,
-					domain->profile, quota_exceeded,
-					transition_failed,
-					ignore_global_allow_read);
-		if (!done)
-			break;
-		head->read_step = 2;
-acl_loop:
-		if (head->read_step == 3)
-			goto tail_mark;
-		/* Print ACL entries in the domain. */
-		list_for_each_cookie(apos, head->read_var2,
-				     &domain->acl_info_list) {
-			struct tomoyo_acl_info *ptr
-				= list_entry(apos, struct tomoyo_acl_info,
-					     list);
-			done = tomoyo_print_entry(head, ptr);
-			if (!done)
-				break;
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.domain, &tomoyo_domain_list) {
+		struct tomoyo_domain_info *domain =
+			list_entry(head->r.domain, typeof(*domain), list);
+		switch (head->r.step) {
+		case 0:
+			if (domain->is_deleted &&
+			    !head->r.print_this_domain_only)
+				continue;
+			/* Print domainname and flags. */
+			tomoyo_set_string(head, domain->domainname->name);
+			tomoyo_set_lf(head);
+			tomoyo_io_printf(head,
+					 TOMOYO_KEYWORD_USE_PROFILE "%u\n",
+					 domain->profile);
+			if (domain->quota_warned)
+				tomoyo_set_string(head, "quota_exceeded\n");
+			if (domain->transition_failed)
+				tomoyo_set_string(head, "transition_failed\n");
+			if (domain->ignore_global_allow_read)
+				tomoyo_set_string(head,
+				       TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ
+						  "\n");
+			head->r.step++;
+			tomoyo_set_lf(head);
+			/* fall through */
+		case 1:
+			if (!tomoyo_read_domain2(head, domain))
+				return;
+			head->r.step++;
+			if (!tomoyo_set_lf(head))
+				return;
+			/* fall through */
+		case 2:
+			head->r.step = 0;
+			if (head->r.print_this_domain_only)
+				goto done;
 		}
-		if (!done)
-			break;
-		head->read_step = 3;
-tail_mark:
-		done = tomoyo_io_printf(head, "\n");
-		if (!done)
-			break;
-		head->read_step = 1;
-		if (head->read_single_domain)
-			break;
 	}
-	head->read_eof = done;
-	return 0;
+ done:
+	head->r.eof = true;
 }
 
 /**
@@ -1607,7 +1080,7 @@
  * This is equivalent to doing
  *
  *     ( echo "select " $domainname; echo "use_profile " $profile ) |
- *     /usr/lib/ccs/loadpolicy -d
+ *     /usr/sbin/tomoyo-loadpolicy -d
  *
  * Caller holds tomoyo_read_lock().
  */
@@ -1646,25 +1119,22 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
+static void tomoyo_read_domain_profile(struct tomoyo_io_buffer *head)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	if (head->read_eof)
-		return 0;
-	list_for_each_cookie(pos, head->read_var1, &tomoyo_domain_list) {
-		struct tomoyo_domain_info *domain;
-		domain = list_entry(pos, struct tomoyo_domain_info, list);
+	if (head->r.eof)
+		return;
+	list_for_each_cookie(head->r.domain, &tomoyo_domain_list) {
+		struct tomoyo_domain_info *domain =
+			list_entry(head->r.domain, typeof(*domain), list);
 		if (domain->is_deleted)
 			continue;
-		done = tomoyo_io_printf(head, "%u %s\n", domain->profile,
-					domain->domainname->name);
-		if (!done)
-			break;
+		if (!tomoyo_flush(head))
+			return;
+		tomoyo_io_printf(head, "%u ", domain->profile);
+		tomoyo_set_string(head, domain->domainname->name);
+		tomoyo_set_lf(head);
 	}
-	head->read_eof = done;
-	return 0;
+	head->r.eof = true;
 }
 
 /**
@@ -1676,11 +1146,7 @@
  */
 static int tomoyo_write_pid(struct tomoyo_io_buffer *head)
 {
-	unsigned long pid;
-	/* No error check. */
-	strict_strtoul(head->write_buf, 10, &pid);
-	head->read_step = (int) pid;
-	head->read_eof = false;
+	head->r.eof = false;
 	return 0;
 }
 
@@ -1694,29 +1160,57 @@
  * The PID is specified by tomoyo_write_pid() so that the user can obtain
  * using read()/write() interface rather than sysctl() interface.
  */
-static int tomoyo_read_pid(struct tomoyo_io_buffer *head)
+static void tomoyo_read_pid(struct tomoyo_io_buffer *head)
 {
-	if (head->read_avail == 0 && !head->read_eof) {
-		const int pid = head->read_step;
-		struct task_struct *p;
-		struct tomoyo_domain_info *domain = NULL;
-		rcu_read_lock();
-		read_lock(&tasklist_lock);
-		p = find_task_by_vpid(pid);
-		if (p)
-			domain = tomoyo_real_domain(p);
-		read_unlock(&tasklist_lock);
-		rcu_read_unlock();
-		if (domain)
-			tomoyo_io_printf(head, "%d %u %s", pid, domain->profile,
-					 domain->domainname->name);
-		head->read_eof = true;
+	char *buf = head->write_buf;
+	bool global_pid = false;
+	unsigned int pid;
+	struct task_struct *p;
+	struct tomoyo_domain_info *domain = NULL;
+
+	/* Accessing write_buf is safe because head->io_sem is held. */
+	if (!buf) {
+		head->r.eof = true;
+		return; /* Do nothing if open(O_RDONLY). */
 	}
-	return 0;
+	if (head->r.w_pos || head->r.eof)
+		return;
+	head->r.eof = true;
+	if (tomoyo_str_starts(&buf, "global-pid "))
+		global_pid = true;
+	pid = (unsigned int) simple_strtoul(buf, NULL, 10);
+	rcu_read_lock();
+	read_lock(&tasklist_lock);
+	if (global_pid)
+		p = find_task_by_pid_ns(pid, &init_pid_ns);
+	else
+		p = find_task_by_vpid(pid);
+	if (p)
+		domain = tomoyo_real_domain(p);
+	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
+	if (!domain)
+		return;
+	tomoyo_io_printf(head, "%u %u ", pid, domain->profile);
+	tomoyo_set_string(head, domain->domainname->name);
 }
 
+static const char *tomoyo_transition_type[TOMOYO_MAX_TRANSITION_TYPE] = {
+	[TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE]
+	= TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_INITIALIZE]
+	= TOMOYO_KEYWORD_INITIALIZE_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_NO_KEEP] = TOMOYO_KEYWORD_NO_KEEP_DOMAIN,
+	[TOMOYO_TRANSITION_CONTROL_KEEP] = TOMOYO_KEYWORD_KEEP_DOMAIN
+};
+
+static const char *tomoyo_group_name[TOMOYO_MAX_GROUP] = {
+	[TOMOYO_PATH_GROUP] = TOMOYO_KEYWORD_PATH_GROUP,
+	[TOMOYO_NUMBER_GROUP] = TOMOYO_KEYWORD_NUMBER_GROUP
+};
+
 /**
- * tomoyo_write_exception_policy - Write exception policy.
+ * tomoyo_write_exception - Write exception policy.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
  *
@@ -1724,186 +1218,523 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_exception_policy(struct tomoyo_io_buffer *head)
+static int tomoyo_write_exception(struct tomoyo_io_buffer *head)
 {
 	char *data = head->write_buf;
 	bool is_delete = tomoyo_str_starts(&data, TOMOYO_KEYWORD_DELETE);
+	u8 i;
+	static const struct {
+		const char *keyword;
+		int (*write) (char *, const bool);
+	} tomoyo_callback[4] = {
+		{ TOMOYO_KEYWORD_AGGREGATOR, tomoyo_write_aggregator },
+		{ TOMOYO_KEYWORD_FILE_PATTERN, tomoyo_write_pattern },
+		{ TOMOYO_KEYWORD_DENY_REWRITE, tomoyo_write_no_rewrite },
+		{ TOMOYO_KEYWORD_ALLOW_READ, tomoyo_write_globally_readable },
+	};
 
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_KEEP_DOMAIN))
-		return tomoyo_write_domain_keeper_policy(data, false,
-							 is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_KEEP_DOMAIN))
-		return tomoyo_write_domain_keeper_policy(data, true, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_INITIALIZE_DOMAIN))
-		return tomoyo_write_domain_initializer_policy(data, false,
-							      is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN))
-		return tomoyo_write_domain_initializer_policy(data, true,
-							      is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALIAS))
-		return tomoyo_write_alias_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_ALLOW_READ))
-		return tomoyo_write_globally_readable_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_FILE_PATTERN))
-		return tomoyo_write_pattern_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_DENY_REWRITE))
-		return tomoyo_write_no_rewrite_policy(data, is_delete);
-	if (tomoyo_str_starts(&data, TOMOYO_KEYWORD_PATH_GROUP))
-		return tomoyo_write_path_group_policy(data, is_delete);
+	for (i = 0; i < TOMOYO_MAX_TRANSITION_TYPE; i++)
+		if (tomoyo_str_starts(&data, tomoyo_transition_type[i]))
+			return tomoyo_write_transition_control(data, is_delete,
+							       i);
+	for (i = 0; i < 4; i++)
+		if (tomoyo_str_starts(&data, tomoyo_callback[i].keyword))
+			return tomoyo_callback[i].write(data, is_delete);
+	for (i = 0; i < TOMOYO_MAX_GROUP; i++)
+		if (tomoyo_str_starts(&data, tomoyo_group_name[i]))
+			return tomoyo_write_group(data, is_delete, i);
 	return -EINVAL;
 }
 
 /**
- * tomoyo_read_exception_policy - Read exception policy.
+ * tomoyo_read_group - Read "struct tomoyo_path_group"/"struct tomoyo_number_group" list.
  *
  * @head: Pointer to "struct tomoyo_io_buffer".
+ * @idx:  Index number.
  *
- * Returns 0 on success, -EINVAL otherwise.
+ * Returns true on success, false otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_exception_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_read_group(struct tomoyo_io_buffer *head, const int idx)
 {
-	if (!head->read_eof) {
-		switch (head->read_step) {
-		case 0:
-			head->read_var2 = NULL;
-			head->read_step = 1;
-		case 1:
-			if (!tomoyo_read_domain_keeper_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 2;
-		case 2:
-			if (!tomoyo_read_globally_readable_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 3;
-		case 3:
-			head->read_var2 = NULL;
-			head->read_step = 4;
-		case 4:
-			if (!tomoyo_read_domain_initializer_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 5;
-		case 5:
-			if (!tomoyo_read_alias_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 6;
-		case 6:
-			head->read_var2 = NULL;
-			head->read_step = 7;
-		case 7:
-			if (!tomoyo_read_file_pattern(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 8;
-		case 8:
-			if (!tomoyo_read_no_rewrite_policy(head))
-				break;
-			head->read_var2 = NULL;
-			head->read_step = 9;
-		case 9:
-			if (!tomoyo_read_path_group_policy(head))
-				break;
-			head->read_var1 = NULL;
-			head->read_var2 = NULL;
-			head->read_step = 10;
-		case 10:
-			head->read_eof = true;
-			break;
-		default:
-			return -EINVAL;
+	list_for_each_cookie(head->r.group, &tomoyo_group_list[idx]) {
+		struct tomoyo_group *group =
+			list_entry(head->r.group, typeof(*group), list);
+		list_for_each_cookie(head->r.acl, &group->member_list) {
+			struct tomoyo_acl_head *ptr =
+				list_entry(head->r.acl, typeof(*ptr), list);
+			if (ptr->is_deleted)
+				continue;
+			if (!tomoyo_flush(head))
+				return false;
+			tomoyo_set_string(head, tomoyo_group_name[idx]);
+			tomoyo_set_string(head, group->group_name->name);
+			if (idx == TOMOYO_PATH_GROUP) {
+				tomoyo_set_space(head);
+				tomoyo_set_string(head, container_of
+					       (ptr, struct tomoyo_path_group,
+						head)->member_name->name);
+			} else if (idx == TOMOYO_NUMBER_GROUP) {
+				tomoyo_print_number_union(head, &container_of
+							  (ptr,
+						   struct tomoyo_number_group,
+							   head)->number);
+			}
+			tomoyo_set_lf(head);
 		}
+		head->r.acl = NULL;
 	}
-	return 0;
-}
-
-/* path to policy loader */
-static const char *tomoyo_loader = "/sbin/tomoyo-init";
-
-/**
- * tomoyo_policy_loader_exists - Check whether /sbin/tomoyo-init exists.
- *
- * Returns true if /sbin/tomoyo-init exists, false otherwise.
- */
-static bool tomoyo_policy_loader_exists(void)
-{
-	/*
-	 * Don't activate MAC if the policy loader doesn't exist.
-	 * If the initrd includes /sbin/init but real-root-dev has not
-	 * mounted on / yet, activating MAC will block the system since
-	 * policies are not loaded yet.
-	 * Thus, let do_execve() call this function everytime.
-	 */
-	struct path path;
-
-	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
-		printk(KERN_INFO "Not activating Mandatory Access Control now "
-		       "since %s doesn't exist.\n", tomoyo_loader);
-		return false;
-	}
-	path_put(&path);
+	head->r.group = NULL;
 	return true;
 }
 
 /**
- * tomoyo_load_policy - Run external policy loader to load policy.
+ * tomoyo_read_policy - Read "struct tomoyo_..._entry" list.
  *
- * @filename: The program about to start.
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ * @idx:  Index number.
  *
- * This function checks whether @filename is /sbin/init , and if so
- * invoke /sbin/tomoyo-init and wait for the termination of /sbin/tomoyo-init
- * and then continues invocation of /sbin/init.
- * /sbin/tomoyo-init reads policy files in /etc/tomoyo/ directory and
- * writes to /sys/kernel/security/tomoyo/ interfaces.
+ * Returns true on success, false otherwise.
  *
- * Returns nothing.
+ * Caller holds tomoyo_read_lock().
  */
-void tomoyo_load_policy(const char *filename)
+static bool tomoyo_read_policy(struct tomoyo_io_buffer *head, const int idx)
 {
-	char *argv[2];
-	char *envp[3];
-
-	if (tomoyo_policy_loaded)
-		return;
-	/*
-	 * Check filename is /sbin/init or /sbin/tomoyo-start.
-	 * /sbin/tomoyo-start is a dummy filename in case where /sbin/init can't
-	 * be passed.
-	 * You can create /sbin/tomoyo-start by
-	 * "ln -s /bin/true /sbin/tomoyo-start".
-	 */
-	if (strcmp(filename, "/sbin/init") &&
-	    strcmp(filename, "/sbin/tomoyo-start"))
-		return;
-	if (!tomoyo_policy_loader_exists())
-		return;
-
-	printk(KERN_INFO "Calling %s to load policy. Please wait.\n",
-	       tomoyo_loader);
-	argv[0] = (char *) tomoyo_loader;
-	argv[1] = NULL;
-	envp[0] = "HOME=/";
-	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-	envp[2] = NULL;
-	call_usermodehelper(argv[0], argv, envp, 1);
-
-	printk(KERN_INFO "TOMOYO: 2.2.0   2009/04/01\n");
-	printk(KERN_INFO "Mandatory Access Control activated.\n");
-	tomoyo_policy_loaded = true;
-	{ /* Check all profiles currently assigned to domains are defined. */
-		struct tomoyo_domain_info *domain;
-		list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-			const u8 profile = domain->profile;
-			if (tomoyo_profile_ptr[profile])
-				continue;
-			panic("Profile %u (used by '%s') not defined.\n",
-			      profile, domain->domainname->name);
+	list_for_each_cookie(head->r.acl, &tomoyo_policy_list[idx]) {
+		struct tomoyo_acl_head *acl =
+			container_of(head->r.acl, typeof(*acl), list);
+		if (acl->is_deleted)
+			continue;
+		if (!tomoyo_flush(head))
+			return false;
+		switch (idx) {
+		case TOMOYO_ID_TRANSITION_CONTROL:
+			{
+				struct tomoyo_transition_control *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  tomoyo_transition_type
+						  [ptr->type]);
+				if (ptr->program)
+					tomoyo_set_string(head,
+							  ptr->program->name);
+				if (ptr->program && ptr->domainname)
+					tomoyo_set_string(head, " from ");
+				if (ptr->domainname)
+					tomoyo_set_string(head,
+							  ptr->domainname->
+							  name);
+			}
+			break;
+		case TOMOYO_ID_GLOBALLY_READABLE:
+			{
+				struct tomoyo_readable_file *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_ALLOW_READ);
+				tomoyo_set_string(head, ptr->filename->name);
+			}
+			break;
+		case TOMOYO_ID_AGGREGATOR:
+			{
+				struct tomoyo_aggregator *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_AGGREGATOR);
+				tomoyo_set_string(head,
+						  ptr->original_name->name);
+				tomoyo_set_space(head);
+				tomoyo_set_string(head,
+					       ptr->aggregated_name->name);
+			}
+			break;
+		case TOMOYO_ID_PATTERN:
+			{
+				struct tomoyo_no_pattern *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_FILE_PATTERN);
+				tomoyo_set_string(head, ptr->pattern->name);
+			}
+			break;
+		case TOMOYO_ID_NO_REWRITE:
+			{
+				struct tomoyo_no_rewrite *ptr =
+					container_of(acl, typeof(*ptr), head);
+				tomoyo_set_string(head,
+						  TOMOYO_KEYWORD_DENY_REWRITE);
+				tomoyo_set_string(head, ptr->pattern->name);
+			}
+			break;
+		default:
+			continue;
 		}
+		tomoyo_set_lf(head);
 	}
+	head->r.acl = NULL;
+	return true;
+}
+
+/**
+ * tomoyo_read_exception - Read exception policy.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static void tomoyo_read_exception(struct tomoyo_io_buffer *head)
+{
+	if (head->r.eof)
+		return;
+	while (head->r.step < TOMOYO_MAX_POLICY &&
+	       tomoyo_read_policy(head, head->r.step))
+		head->r.step++;
+	if (head->r.step < TOMOYO_MAX_POLICY)
+		return;
+	while (head->r.step < TOMOYO_MAX_POLICY + TOMOYO_MAX_GROUP &&
+	       tomoyo_read_group(head, head->r.step - TOMOYO_MAX_POLICY))
+		head->r.step++;
+	if (head->r.step < TOMOYO_MAX_POLICY + TOMOYO_MAX_GROUP)
+		return;
+	head->r.eof = true;
+}
+
+/**
+ * tomoyo_print_header - Get header line of audit log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns string representation.
+ *
+ * This function uses kmalloc(), so caller must kfree() if this function
+ * didn't return NULL.
+ */
+static char *tomoyo_print_header(struct tomoyo_request_info *r)
+{
+	struct timeval tv;
+	const pid_t gpid = task_pid_nr(current);
+	static const int tomoyo_buffer_len = 4096;
+	char *buffer = kmalloc(tomoyo_buffer_len, GFP_NOFS);
+	if (!buffer)
+		return NULL;
+	do_gettimeofday(&tv);
+	snprintf(buffer, tomoyo_buffer_len - 1,
+		 "#timestamp=%lu profile=%u mode=%s (global-pid=%u)"
+		 " task={ pid=%u ppid=%u uid=%u gid=%u euid=%u"
+		 " egid=%u suid=%u sgid=%u fsuid=%u fsgid=%u }",
+		 tv.tv_sec, r->profile, tomoyo_mode[r->mode], gpid,
+		 (pid_t) sys_getpid(), (pid_t) sys_getppid(),
+		 current_uid(), current_gid(), current_euid(),
+		 current_egid(), current_suid(), current_sgid(),
+		 current_fsuid(), current_fsgid());
+	return buffer;
+}
+
+/**
+ * tomoyo_init_audit_log - Allocate buffer for audit logs.
+ *
+ * @len: Required size.
+ * @r:   Pointer to "struct tomoyo_request_info".
+ *
+ * Returns pointer to allocated memory.
+ *
+ * The @len is updated to add the header lines' size on success.
+ *
+ * This function uses kzalloc(), so caller must kfree() if this function
+ * didn't return NULL.
+ */
+static char *tomoyo_init_audit_log(int *len, struct tomoyo_request_info *r)
+{
+	char *buf = NULL;
+	const char *header;
+	const char *domainname;
+	if (!r->domain)
+		r->domain = tomoyo_domain();
+	domainname = r->domain->domainname->name;
+	header = tomoyo_print_header(r);
+	if (!header)
+		return NULL;
+	*len += strlen(domainname) + strlen(header) + 10;
+	buf = kzalloc(*len, GFP_NOFS);
+	if (buf)
+		snprintf(buf, (*len) - 1, "%s\n%s\n", header, domainname);
+	kfree(header);
+	return buf;
+}
+
+/* Wait queue for tomoyo_query_list. */
+static DECLARE_WAIT_QUEUE_HEAD(tomoyo_query_wait);
+
+/* Lock for manipulating tomoyo_query_list. */
+static DEFINE_SPINLOCK(tomoyo_query_list_lock);
+
+/* Structure for query. */
+struct tomoyo_query {
+	struct list_head list;
+	char *query;
+	int query_len;
+	unsigned int serial;
+	int timer;
+	int answer;
+};
+
+/* The list for "struct tomoyo_query". */
+static LIST_HEAD(tomoyo_query_list);
+
+/*
+ * Number of "struct file" referring /sys/kernel/security/tomoyo/query
+ * interface.
+ */
+static atomic_t tomoyo_query_observers = ATOMIC_INIT(0);
+
+/**
+ * tomoyo_supervisor - Ask for the supervisor's decision.
+ *
+ * @r:       Pointer to "struct tomoyo_request_info".
+ * @fmt:     The printf()'s format string, followed by parameters.
+ *
+ * Returns 0 if the supervisor decided to permit the access request which
+ * violated the policy in enforcing mode, TOMOYO_RETRY_REQUEST if the
+ * supervisor decided to retry the access request which violated the policy in
+ * enforcing mode, 0 if it is not in enforcing mode, -EPERM otherwise.
+ */
+int tomoyo_supervisor(struct tomoyo_request_info *r, const char *fmt, ...)
+{
+	va_list args;
+	int error = -EPERM;
+	int pos;
+	int len;
+	static unsigned int tomoyo_serial;
+	struct tomoyo_query *entry = NULL;
+	bool quota_exceeded = false;
+	char *header;
+	switch (r->mode) {
+		char *buffer;
+	case TOMOYO_CONFIG_LEARNING:
+		if (!tomoyo_domain_quota_is_ok(r))
+			return 0;
+		va_start(args, fmt);
+		len = vsnprintf((char *) &pos, sizeof(pos) - 1, fmt, args) + 4;
+		va_end(args);
+		buffer = kmalloc(len, GFP_NOFS);
+		if (!buffer)
+			return 0;
+		va_start(args, fmt);
+		vsnprintf(buffer, len - 1, fmt, args);
+		va_end(args);
+		tomoyo_normalize_line(buffer);
+		tomoyo_write_domain2(buffer, r->domain, false);
+		kfree(buffer);
+		/* fall through */
+	case TOMOYO_CONFIG_PERMISSIVE:
+		return 0;
+	}
+	if (!r->domain)
+		r->domain = tomoyo_domain();
+	if (!atomic_read(&tomoyo_query_observers))
+		return -EPERM;
+	va_start(args, fmt);
+	len = vsnprintf((char *) &pos, sizeof(pos) - 1, fmt, args) + 32;
+	va_end(args);
+	header = tomoyo_init_audit_log(&len, r);
+	if (!header)
+		goto out;
+	entry = kzalloc(sizeof(*entry), GFP_NOFS);
+	if (!entry)
+		goto out;
+	entry->query = kzalloc(len, GFP_NOFS);
+	if (!entry->query)
+		goto out;
+	len = ksize(entry->query);
+	spin_lock(&tomoyo_query_list_lock);
+	if (tomoyo_quota_for_query && tomoyo_query_memory_size + len +
+	    sizeof(*entry) >= tomoyo_quota_for_query) {
+		quota_exceeded = true;
+	} else {
+		tomoyo_query_memory_size += len + sizeof(*entry);
+		entry->serial = tomoyo_serial++;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (quota_exceeded)
+		goto out;
+	pos = snprintf(entry->query, len - 1, "Q%u-%hu\n%s",
+		       entry->serial, r->retry, header);
+	kfree(header);
+	header = NULL;
+	va_start(args, fmt);
+	vsnprintf(entry->query + pos, len - 1 - pos, fmt, args);
+	entry->query_len = strlen(entry->query) + 1;
+	va_end(args);
+	spin_lock(&tomoyo_query_list_lock);
+	list_add_tail(&entry->list, &tomoyo_query_list);
+	spin_unlock(&tomoyo_query_list_lock);
+	/* Give 10 seconds for supervisor's opinion. */
+	for (entry->timer = 0;
+	     atomic_read(&tomoyo_query_observers) && entry->timer < 100;
+	     entry->timer++) {
+		wake_up(&tomoyo_query_wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ / 10);
+		if (entry->answer)
+			break;
+	}
+	spin_lock(&tomoyo_query_list_lock);
+	list_del(&entry->list);
+	tomoyo_query_memory_size -= len + sizeof(*entry);
+	spin_unlock(&tomoyo_query_list_lock);
+	switch (entry->answer) {
+	case 3: /* Asked to retry by administrator. */
+		error = TOMOYO_RETRY_REQUEST;
+		r->retry++;
+		break;
+	case 1:
+		/* Granted by administrator. */
+		error = 0;
+		break;
+	case 0:
+		/* Timed out. */
+		break;
+	default:
+		/* Rejected by administrator. */
+		break;
+	}
+ out:
+	if (entry)
+		kfree(entry->query);
+	kfree(entry);
+	kfree(header);
+	return error;
+}
+
+/**
+ * tomoyo_poll_query - poll() for /sys/kernel/security/tomoyo/query.
+ *
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
+ *
+ * Returns POLLIN | POLLRDNORM when ready to read, 0 otherwise.
+ *
+ * Waits for access requests which violated policy in enforcing mode.
+ */
+static int tomoyo_poll_query(struct file *file, poll_table *wait)
+{
+	struct list_head *tmp;
+	bool found = false;
+	u8 i;
+	for (i = 0; i < 2; i++) {
+		spin_lock(&tomoyo_query_list_lock);
+		list_for_each(tmp, &tomoyo_query_list) {
+			struct tomoyo_query *ptr =
+				list_entry(tmp, typeof(*ptr), list);
+			if (ptr->answer)
+				continue;
+			found = true;
+			break;
+		}
+		spin_unlock(&tomoyo_query_list_lock);
+		if (found)
+			return POLLIN | POLLRDNORM;
+		if (i)
+			break;
+		poll_wait(file, &tomoyo_query_wait, wait);
+	}
+	return 0;
+}
+
+/**
+ * tomoyo_read_query - Read access requests which violated policy in enforcing mode.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ */
+static void tomoyo_read_query(struct tomoyo_io_buffer *head)
+{
+	struct list_head *tmp;
+	int pos = 0;
+	int len = 0;
+	char *buf;
+	if (head->r.w_pos)
+		return;
+	if (head->read_buf) {
+		kfree(head->read_buf);
+		head->read_buf = NULL;
+	}
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->answer)
+			continue;
+		if (pos++ != head->r.query_index)
+			continue;
+		len = ptr->query_len;
+		break;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (!len) {
+		head->r.query_index = 0;
+		return;
+	}
+	buf = kzalloc(len, GFP_NOFS);
+	if (!buf)
+		return;
+	pos = 0;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->answer)
+			continue;
+		if (pos++ != head->r.query_index)
+			continue;
+		/*
+		 * Some query can be skipped because tomoyo_query_list
+		 * can change, but I don't care.
+		 */
+		if (len == ptr->query_len)
+			memmove(buf, ptr->query, len);
+		break;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (buf[0]) {
+		head->read_buf = buf;
+		head->r.w[head->r.w_pos++] = buf;
+		head->r.query_index++;
+	} else {
+		kfree(buf);
+	}
+}
+
+/**
+ * tomoyo_write_answer - Write the supervisor's decision.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0 on success, -EINVAL otherwise.
+ */
+static int tomoyo_write_answer(struct tomoyo_io_buffer *head)
+{
+	char *data = head->write_buf;
+	struct list_head *tmp;
+	unsigned int serial;
+	unsigned int answer;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		ptr->timer = 0;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	if (sscanf(data, "A%u=%u", &serial, &answer) != 2)
+		return -EINVAL;
+	spin_lock(&tomoyo_query_list_lock);
+	list_for_each(tmp, &tomoyo_query_list) {
+		struct tomoyo_query *ptr = list_entry(tmp, typeof(*ptr), list);
+		if (ptr->serial != serial)
+			continue;
+		if (!ptr->answer)
+			ptr->answer = answer;
+		break;
+	}
+	spin_unlock(&tomoyo_query_list_lock);
+	return 0;
 }
 
 /**
@@ -1913,13 +1744,12 @@
  *
  * Returns version information.
  */
-static int tomoyo_read_version(struct tomoyo_io_buffer *head)
+static void tomoyo_read_version(struct tomoyo_io_buffer *head)
 {
-	if (!head->read_eof) {
-		tomoyo_io_printf(head, "2.2.0");
-		head->read_eof = true;
+	if (!head->r.eof) {
+		tomoyo_io_printf(head, "2.3.0");
+		head->r.eof = true;
 	}
-	return 0;
 }
 
 /**
@@ -1929,18 +1759,17 @@
  *
  * Returns the current process's domainname.
  */
-static int tomoyo_read_self_domain(struct tomoyo_io_buffer *head)
+static void tomoyo_read_self_domain(struct tomoyo_io_buffer *head)
 {
-	if (!head->read_eof) {
+	if (!head->r.eof) {
 		/*
 		 * tomoyo_domain()->domainname != NULL
 		 * because every process belongs to a domain and
 		 * the domain's name cannot be NULL.
 		 */
 		tomoyo_io_printf(head, "%s", tomoyo_domain()->domainname->name);
-		head->read_eof = true;
+		head->r.eof = true;
 	}
-	return 0;
 }
 
 /**
@@ -1953,23 +1782,24 @@
  *
  * Caller acquires tomoyo_read_lock().
  */
-static int tomoyo_open_control(const u8 type, struct file *file)
+int tomoyo_open_control(const u8 type, struct file *file)
 {
 	struct tomoyo_io_buffer *head = kzalloc(sizeof(*head), GFP_NOFS);
 
 	if (!head)
 		return -ENOMEM;
 	mutex_init(&head->io_sem);
+	head->type = type;
 	switch (type) {
 	case TOMOYO_DOMAINPOLICY:
 		/* /sys/kernel/security/tomoyo/domain_policy */
-		head->write = tomoyo_write_domain_policy;
-		head->read = tomoyo_read_domain_policy;
+		head->write = tomoyo_write_domain;
+		head->read = tomoyo_read_domain;
 		break;
 	case TOMOYO_EXCEPTIONPOLICY:
 		/* /sys/kernel/security/tomoyo/exception_policy */
-		head->write = tomoyo_write_exception_policy;
-		head->read = tomoyo_read_exception_policy;
+		head->write = tomoyo_write_exception;
+		head->read = tomoyo_read_exception;
 		break;
 	case TOMOYO_SELFDOMAIN:
 		/* /sys/kernel/security/tomoyo/self_domain */
@@ -2001,10 +1831,15 @@
 		head->write = tomoyo_write_profile;
 		head->read = tomoyo_read_profile;
 		break;
+	case TOMOYO_QUERY: /* /sys/kernel/security/tomoyo/query */
+		head->poll = tomoyo_poll_query;
+		head->write = tomoyo_write_answer;
+		head->read = tomoyo_read_query;
+		break;
 	case TOMOYO_MANAGER:
 		/* /sys/kernel/security/tomoyo/manager */
-		head->write = tomoyo_write_manager_policy;
-		head->read = tomoyo_read_manager_policy;
+		head->write = tomoyo_write_manager;
+		head->read = tomoyo_read_manager;
 		break;
 	}
 	if (!(file->f_mode & FMODE_READ)) {
@@ -2013,7 +1848,9 @@
 		 * for reading.
 		 */
 		head->read = NULL;
-	} else {
+		head->poll = NULL;
+	} else if (!head->poll) {
+		/* Don't allocate read_buf for poll() access. */
 		if (!head->readbuf_size)
 			head->readbuf_size = 4096 * 2;
 		head->read_buf = kzalloc(head->readbuf_size, GFP_NOFS);
@@ -2037,7 +1874,8 @@
 			return -ENOMEM;
 		}
 	}
-	head->reader_idx = tomoyo_read_lock();
+	if (type != TOMOYO_QUERY)
+		head->reader_idx = tomoyo_read_lock();
 	file->private_data = head;
 	/*
 	 * Call the handler now if the file is
@@ -2048,10 +1886,35 @@
 	 */
 	if (type == TOMOYO_SELFDOMAIN)
 		tomoyo_read_control(file, NULL, 0);
+	/*
+	 * If the file is /sys/kernel/security/tomoyo/query , increment the
+	 * observer counter.
+	 * The obserber counter is used by tomoyo_supervisor() to see if
+	 * there is some process monitoring /sys/kernel/security/tomoyo/query.
+	 */
+	else if (type == TOMOYO_QUERY)
+		atomic_inc(&tomoyo_query_observers);
 	return 0;
 }
 
 /**
+ * tomoyo_poll_control - poll() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
+ *
+ * Waits for read readiness.
+ * /sys/kernel/security/tomoyo/query is handled by /usr/sbin/tomoyo-queryd .
+ */
+int tomoyo_poll_control(struct file *file, poll_table *wait)
+{
+	struct tomoyo_io_buffer *head = file->private_data;
+	if (!head->poll)
+		return -ENOSYS;
+	return head->poll(file, wait);
+}
+
+/**
  * tomoyo_read_control - read() for /sys/kernel/security/tomoyo/ interface.
  *
  * @file:       Pointer to "struct file".
@@ -2062,36 +1925,23 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_read_control(struct file *file, char __user *buffer,
-			       const int buffer_len)
+int tomoyo_read_control(struct file *file, char __user *buffer,
+			const int buffer_len)
 {
-	int len = 0;
+	int len;
 	struct tomoyo_io_buffer *head = file->private_data;
-	char *cp;
 
 	if (!head->read)
 		return -ENOSYS;
 	if (mutex_lock_interruptible(&head->io_sem))
 		return -EINTR;
-	/* Call the policy handler. */
-	len = head->read(head);
-	if (len < 0)
-		goto out;
-	/* Write to buffer. */
-	len = head->read_avail;
-	if (len > buffer_len)
-		len = buffer_len;
-	if (!len)
-		goto out;
-	/* head->read_buf changes by some functions. */
-	cp = head->read_buf;
-	if (copy_to_user(buffer, cp, len)) {
-		len = -EFAULT;
-		goto out;
-	}
-	head->read_avail -= len;
-	memmove(cp, cp + len, head->read_avail);
- out:
+	head->read_user_buf = buffer;
+	head->read_user_buf_avail = buffer_len;
+	if (tomoyo_flush(head))
+		/* Call the policy handler. */
+		head->read(head);
+	tomoyo_flush(head);
+	len = head->read_user_buf - buffer;
 	mutex_unlock(&head->io_sem);
 	return len;
 }
@@ -2107,8 +1957,8 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_write_control(struct file *file, const char __user *buffer,
-				const int buffer_len)
+int tomoyo_write_control(struct file *file, const char __user *buffer,
+			 const int buffer_len)
 {
 	struct tomoyo_io_buffer *head = file->private_data;
 	int error = buffer_len;
@@ -2121,8 +1971,7 @@
 		return -EFAULT;
 	/* Don't allow updating policies by non manager programs. */
 	if (head->write != tomoyo_write_pid &&
-	    head->write != tomoyo_write_domain_policy &&
-	    !tomoyo_is_policy_manager())
+	    head->write != tomoyo_write_domain && !tomoyo_manager())
 		return -EPERM;
 	if (mutex_lock_interruptible(&head->io_sem))
 		return -EINTR;
@@ -2159,12 +2008,19 @@
  *
  * Caller looses tomoyo_read_lock().
  */
-static int tomoyo_close_control(struct file *file)
+int tomoyo_close_control(struct file *file)
 {
 	struct tomoyo_io_buffer *head = file->private_data;
 	const bool is_write = !!head->write_buf;
 
-	tomoyo_read_unlock(head->reader_idx);
+	/*
+	 * If the file is /sys/kernel/security/tomoyo/query , decrement the
+	 * observer counter.
+	 */
+	if (head->type == TOMOYO_QUERY)
+		atomic_dec(&tomoyo_query_observers);
+	else
+		tomoyo_read_unlock(head->reader_idx);
 	/* Release memory used for policy I/O. */
 	kfree(head->read_buf);
 	head->read_buf = NULL;
@@ -2179,129 +2035,25 @@
 }
 
 /**
- * tomoyo_open - open() for /sys/kernel/security/tomoyo/ interface.
- *
- * @inode: Pointer to "struct inode".
- * @file:  Pointer to "struct file".
- *
- * Returns 0 on success, negative value otherwise.
+ * tomoyo_check_profile - Check all profiles currently assigned to domains are defined.
  */
-static int tomoyo_open(struct inode *inode, struct file *file)
+void tomoyo_check_profile(void)
 {
-	const int key = ((u8 *) file->f_path.dentry->d_inode->i_private)
-		- ((u8 *) NULL);
-	return tomoyo_open_control(key, file);
+	struct tomoyo_domain_info *domain;
+	const int idx = tomoyo_read_lock();
+	tomoyo_policy_loaded = true;
+	/* Check all profiles currently assigned to domains are defined. */
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+		const u8 profile = domain->profile;
+		if (tomoyo_profile_ptr[profile])
+			continue;
+		panic("Profile %u (used by '%s') not defined.\n",
+		      profile, domain->domainname->name);
+	}
+	tomoyo_read_unlock(idx);
+	if (tomoyo_profile_version != 20090903)
+		panic("Profile version %u is not supported.\n",
+		      tomoyo_profile_version);
+	printk(KERN_INFO "TOMOYO: 2.3.0\n");
+	printk(KERN_INFO "Mandatory Access Control activated.\n");
 }
-
-/**
- * tomoyo_release - close() for /sys/kernel/security/tomoyo/ interface.
- *
- * @inode: Pointer to "struct inode".
- * @file:  Pointer to "struct file".
- *
- * Returns 0 on success, negative value otherwise.
- */
-static int tomoyo_release(struct inode *inode, struct file *file)
-{
-	return tomoyo_close_control(file);
-}
-
-/**
- * tomoyo_read - read() for /sys/kernel/security/tomoyo/ interface.
- *
- * @file:  Pointer to "struct file".
- * @buf:   Pointer to buffer.
- * @count: Size of @buf.
- * @ppos:  Unused.
- *
- * Returns bytes read on success, negative value otherwise.
- */
-static ssize_t tomoyo_read(struct file *file, char __user *buf, size_t count,
-			   loff_t *ppos)
-{
-	return tomoyo_read_control(file, buf, count);
-}
-
-/**
- * tomoyo_write - write() for /sys/kernel/security/tomoyo/ interface.
- *
- * @file:  Pointer to "struct file".
- * @buf:   Pointer to buffer.
- * @count: Size of @buf.
- * @ppos:  Unused.
- *
- * Returns @count on success, negative value otherwise.
- */
-static ssize_t tomoyo_write(struct file *file, const char __user *buf,
-			    size_t count, loff_t *ppos)
-{
-	return tomoyo_write_control(file, buf, count);
-}
-
-/*
- * tomoyo_operations is a "struct file_operations" which is used for handling
- * /sys/kernel/security/tomoyo/ interface.
- *
- * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR).
- * See tomoyo_io_buffer for internals.
- */
-static const struct file_operations tomoyo_operations = {
-	.open    = tomoyo_open,
-	.release = tomoyo_release,
-	.read    = tomoyo_read,
-	.write   = tomoyo_write,
-};
-
-/**
- * tomoyo_create_entry - Create interface files under /sys/kernel/security/tomoyo/ directory.
- *
- * @name:   The name of the interface file.
- * @mode:   The permission of the interface file.
- * @parent: The parent directory.
- * @key:    Type of interface.
- *
- * Returns nothing.
- */
-static void __init tomoyo_create_entry(const char *name, const mode_t mode,
-				       struct dentry *parent, const u8 key)
-{
-	securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,
-			       &tomoyo_operations);
-}
-
-/**
- * tomoyo_initerface_init - Initialize /sys/kernel/security/tomoyo/ interface.
- *
- * Returns 0.
- */
-static int __init tomoyo_initerface_init(void)
-{
-	struct dentry *tomoyo_dir;
-
-	/* Don't create securityfs entries unless registered. */
-	if (current_cred()->security != &tomoyo_kernel_domain)
-		return 0;
-
-	tomoyo_dir = securityfs_create_dir("tomoyo", NULL);
-	tomoyo_create_entry("domain_policy",    0600, tomoyo_dir,
-			    TOMOYO_DOMAINPOLICY);
-	tomoyo_create_entry("exception_policy", 0600, tomoyo_dir,
-			    TOMOYO_EXCEPTIONPOLICY);
-	tomoyo_create_entry("self_domain",      0400, tomoyo_dir,
-			    TOMOYO_SELFDOMAIN);
-	tomoyo_create_entry(".domain_status",   0600, tomoyo_dir,
-			    TOMOYO_DOMAIN_STATUS);
-	tomoyo_create_entry(".process_status",  0600, tomoyo_dir,
-			    TOMOYO_PROCESS_STATUS);
-	tomoyo_create_entry("meminfo",          0600, tomoyo_dir,
-			    TOMOYO_MEMINFO);
-	tomoyo_create_entry("profile",          0600, tomoyo_dir,
-			    TOMOYO_PROFILE);
-	tomoyo_create_entry("manager",          0600, tomoyo_dir,
-			    TOMOYO_MANAGER);
-	tomoyo_create_entry("version",          0400, tomoyo_dir,
-			    TOMOYO_VERSION);
-	return 0;
-}
-
-fs_initcall(tomoyo_initerface_init);
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 9f1ae5e..04454cb7b 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -20,6 +20,7 @@
 #include <linux/mount.h>
 #include <linux/list.h>
 #include <linux/cred.h>
+#include <linux/poll.h>
 struct linux_binprm;
 
 /********** Constants definitions. **********/
@@ -32,20 +33,44 @@
 #define TOMOYO_HASH_BITS  8
 #define TOMOYO_MAX_HASH (1u<<TOMOYO_HASH_BITS)
 
-/*
- * This is the max length of a token.
- *
- * A token consists of only ASCII printable characters.
- * Non printable characters in a token is represented in \ooo style
- * octal string. Thus, \ itself is represented as \\.
- */
-#define TOMOYO_MAX_PATHNAME_LEN 4000
+#define TOMOYO_EXEC_TMPSIZE     4096
 
 /* Profile number is an integer between 0 and 255. */
 #define TOMOYO_MAX_PROFILES 256
 
+enum tomoyo_mode_index {
+	TOMOYO_CONFIG_DISABLED,
+	TOMOYO_CONFIG_LEARNING,
+	TOMOYO_CONFIG_PERMISSIVE,
+	TOMOYO_CONFIG_ENFORCING,
+	TOMOYO_CONFIG_USE_DEFAULT = 255
+};
+
+enum tomoyo_policy_id {
+	TOMOYO_ID_GROUP,
+	TOMOYO_ID_PATH_GROUP,
+	TOMOYO_ID_NUMBER_GROUP,
+	TOMOYO_ID_TRANSITION_CONTROL,
+	TOMOYO_ID_AGGREGATOR,
+	TOMOYO_ID_GLOBALLY_READABLE,
+	TOMOYO_ID_PATTERN,
+	TOMOYO_ID_NO_REWRITE,
+	TOMOYO_ID_MANAGER,
+	TOMOYO_ID_NAME,
+	TOMOYO_ID_ACL,
+	TOMOYO_ID_DOMAIN,
+	TOMOYO_MAX_POLICY
+};
+
+enum tomoyo_group_id {
+	TOMOYO_PATH_GROUP,
+	TOMOYO_NUMBER_GROUP,
+	TOMOYO_MAX_GROUP
+};
+
 /* Keywords for ACLs. */
-#define TOMOYO_KEYWORD_ALIAS                     "alias "
+#define TOMOYO_KEYWORD_AGGREGATOR                "aggregator "
+#define TOMOYO_KEYWORD_ALLOW_MOUNT               "allow_mount "
 #define TOMOYO_KEYWORD_ALLOW_READ                "allow_read "
 #define TOMOYO_KEYWORD_DELETE                    "delete "
 #define TOMOYO_KEYWORD_DENY_REWRITE              "deny_rewrite "
@@ -55,36 +80,51 @@
 #define TOMOYO_KEYWORD_NO_INITIALIZE_DOMAIN      "no_initialize_domain "
 #define TOMOYO_KEYWORD_NO_KEEP_DOMAIN            "no_keep_domain "
 #define TOMOYO_KEYWORD_PATH_GROUP                "path_group "
+#define TOMOYO_KEYWORD_NUMBER_GROUP              "number_group "
 #define TOMOYO_KEYWORD_SELECT                    "select "
 #define TOMOYO_KEYWORD_USE_PROFILE               "use_profile "
 #define TOMOYO_KEYWORD_IGNORE_GLOBAL_ALLOW_READ  "ignore_global_allow_read"
+#define TOMOYO_KEYWORD_QUOTA_EXCEEDED            "quota_exceeded"
+#define TOMOYO_KEYWORD_TRANSITION_FAILED         "transition_failed"
 /* A domain definition starts with <kernel>. */
 #define TOMOYO_ROOT_NAME                         "<kernel>"
 #define TOMOYO_ROOT_NAME_LEN                     (sizeof(TOMOYO_ROOT_NAME) - 1)
 
-/* Index numbers for Access Controls. */
-enum tomoyo_mac_index {
-	TOMOYO_MAC_FOR_FILE,  /* domain_policy.conf */
-	TOMOYO_MAX_ACCEPT_ENTRY,
-	TOMOYO_VERBOSE,
-	TOMOYO_MAX_CONTROL_INDEX
+/* Value type definition. */
+#define TOMOYO_VALUE_TYPE_INVALID     0
+#define TOMOYO_VALUE_TYPE_DECIMAL     1
+#define TOMOYO_VALUE_TYPE_OCTAL       2
+#define TOMOYO_VALUE_TYPE_HEXADECIMAL 3
+
+enum tomoyo_transition_type {
+	/* Do not change this order, */
+	TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE,
+	TOMOYO_TRANSITION_CONTROL_INITIALIZE,
+	TOMOYO_TRANSITION_CONTROL_NO_KEEP,
+	TOMOYO_TRANSITION_CONTROL_KEEP,
+	TOMOYO_MAX_TRANSITION_TYPE
 };
 
 /* Index numbers for Access Controls. */
 enum tomoyo_acl_entry_type_index {
 	TOMOYO_TYPE_PATH_ACL,
 	TOMOYO_TYPE_PATH2_ACL,
+	TOMOYO_TYPE_PATH_NUMBER_ACL,
+	TOMOYO_TYPE_MKDEV_ACL,
+	TOMOYO_TYPE_MOUNT_ACL,
 };
 
 /* Index numbers for File Controls. */
 
 /*
- * TYPE_READ_WRITE_ACL is special. TYPE_READ_WRITE_ACL is automatically set
- * if both TYPE_READ_ACL and TYPE_WRITE_ACL are set. Both TYPE_READ_ACL and
- * TYPE_WRITE_ACL are automatically set if TYPE_READ_WRITE_ACL is set.
- * TYPE_READ_WRITE_ACL is automatically cleared if either TYPE_READ_ACL or
- * TYPE_WRITE_ACL is cleared. Both TYPE_READ_ACL and TYPE_WRITE_ACL are
- * automatically cleared if TYPE_READ_WRITE_ACL is cleared.
+ * TOMOYO_TYPE_READ_WRITE is special. TOMOYO_TYPE_READ_WRITE is automatically
+ * set if both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are set.
+ * Both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are automatically set if
+ * TOMOYO_TYPE_READ_WRITE is set.
+ * TOMOYO_TYPE_READ_WRITE is automatically cleared if either TOMOYO_TYPE_READ
+ * or TOMOYO_TYPE_WRITE is cleared.
+ * Both TOMOYO_TYPE_READ and TOMOYO_TYPE_WRITE are automatically cleared if
+ * TOMOYO_TYPE_READ_WRITE is cleared.
  */
 
 enum tomoyo_path_acl_index {
@@ -92,27 +132,24 @@
 	TOMOYO_TYPE_EXECUTE,
 	TOMOYO_TYPE_READ,
 	TOMOYO_TYPE_WRITE,
-	TOMOYO_TYPE_CREATE,
 	TOMOYO_TYPE_UNLINK,
-	TOMOYO_TYPE_MKDIR,
 	TOMOYO_TYPE_RMDIR,
-	TOMOYO_TYPE_MKFIFO,
-	TOMOYO_TYPE_MKSOCK,
-	TOMOYO_TYPE_MKBLOCK,
-	TOMOYO_TYPE_MKCHAR,
 	TOMOYO_TYPE_TRUNCATE,
 	TOMOYO_TYPE_SYMLINK,
 	TOMOYO_TYPE_REWRITE,
-	TOMOYO_TYPE_IOCTL,
-	TOMOYO_TYPE_CHMOD,
-	TOMOYO_TYPE_CHOWN,
-	TOMOYO_TYPE_CHGRP,
 	TOMOYO_TYPE_CHROOT,
-	TOMOYO_TYPE_MOUNT,
 	TOMOYO_TYPE_UMOUNT,
 	TOMOYO_MAX_PATH_OPERATION
 };
 
+#define TOMOYO_RW_MASK ((1 << TOMOYO_TYPE_READ) | (1 << TOMOYO_TYPE_WRITE))
+
+enum tomoyo_mkdev_acl_index {
+	TOMOYO_TYPE_MKBLOCK,
+	TOMOYO_TYPE_MKCHAR,
+	TOMOYO_MAX_MKDEV_OPERATION
+};
+
 enum tomoyo_path2_acl_index {
 	TOMOYO_TYPE_LINK,
 	TOMOYO_TYPE_RENAME,
@@ -120,6 +157,18 @@
 	TOMOYO_MAX_PATH2_OPERATION
 };
 
+enum tomoyo_path_number_acl_index {
+	TOMOYO_TYPE_CREATE,
+	TOMOYO_TYPE_MKDIR,
+	TOMOYO_TYPE_MKFIFO,
+	TOMOYO_TYPE_MKSOCK,
+	TOMOYO_TYPE_IOCTL,
+	TOMOYO_TYPE_CHMOD,
+	TOMOYO_TYPE_CHOWN,
+	TOMOYO_TYPE_CHGRP,
+	TOMOYO_MAX_PATH_NUMBER_OPERATION
+};
+
 enum tomoyo_securityfs_interface_index {
 	TOMOYO_DOMAINPOLICY,
 	TOMOYO_EXCEPTIONPOLICY,
@@ -129,20 +178,109 @@
 	TOMOYO_SELFDOMAIN,
 	TOMOYO_VERSION,
 	TOMOYO_PROFILE,
+	TOMOYO_QUERY,
 	TOMOYO_MANAGER
 };
 
+enum tomoyo_mac_index {
+	TOMOYO_MAC_FILE_EXECUTE,
+	TOMOYO_MAC_FILE_OPEN,
+	TOMOYO_MAC_FILE_CREATE,
+	TOMOYO_MAC_FILE_UNLINK,
+	TOMOYO_MAC_FILE_MKDIR,
+	TOMOYO_MAC_FILE_RMDIR,
+	TOMOYO_MAC_FILE_MKFIFO,
+	TOMOYO_MAC_FILE_MKSOCK,
+	TOMOYO_MAC_FILE_TRUNCATE,
+	TOMOYO_MAC_FILE_SYMLINK,
+	TOMOYO_MAC_FILE_REWRITE,
+	TOMOYO_MAC_FILE_MKBLOCK,
+	TOMOYO_MAC_FILE_MKCHAR,
+	TOMOYO_MAC_FILE_LINK,
+	TOMOYO_MAC_FILE_RENAME,
+	TOMOYO_MAC_FILE_CHMOD,
+	TOMOYO_MAC_FILE_CHOWN,
+	TOMOYO_MAC_FILE_CHGRP,
+	TOMOYO_MAC_FILE_IOCTL,
+	TOMOYO_MAC_FILE_CHROOT,
+	TOMOYO_MAC_FILE_MOUNT,
+	TOMOYO_MAC_FILE_UMOUNT,
+	TOMOYO_MAC_FILE_PIVOT_ROOT,
+	TOMOYO_MAX_MAC_INDEX
+};
+
+enum tomoyo_mac_category_index {
+	TOMOYO_MAC_CATEGORY_FILE,
+	TOMOYO_MAX_MAC_CATEGORY_INDEX
+};
+
+#define TOMOYO_RETRY_REQUEST 1 /* Retry this request. */
+
 /********** Structure definitions. **********/
 
 /*
- * tomoyo_page_buffer is a structure which is used for holding a pathname
- * obtained from "struct dentry" and "struct vfsmount" pair.
- * As of now, it is 4096 bytes. If users complain that 4096 bytes is too small
- * (because TOMOYO escapes non ASCII printable characters using \ooo format),
- * we will make the buffer larger.
+ * tomoyo_acl_head is a structure which is used for holding elements not in
+ * domain policy.
+ * It has following fields.
+ *
+ *  (1) "list" which is linked to tomoyo_policy_list[] .
+ *  (2) "is_deleted" is a bool which is true if marked as deleted, false
+ *      otherwise.
  */
-struct tomoyo_page_buffer {
-	char buffer[4096];
+struct tomoyo_acl_head {
+	struct list_head list;
+	bool is_deleted;
+} __packed;
+
+/*
+ * tomoyo_request_info is a structure which is used for holding
+ *
+ * (1) Domain information of current process.
+ * (2) How many retries are made for this request.
+ * (3) Profile number used for this request.
+ * (4) Access control mode of the profile.
+ */
+struct tomoyo_request_info {
+	struct tomoyo_domain_info *domain;
+	/* For holding parameters. */
+	union {
+		struct {
+			const struct tomoyo_path_info *filename;
+			/* For using wildcards at tomoyo_find_next_domain(). */
+			const struct tomoyo_path_info *matched_path;
+			u8 operation;
+		} path;
+		struct {
+			const struct tomoyo_path_info *filename1;
+			const struct tomoyo_path_info *filename2;
+			u8 operation;
+		} path2;
+		struct {
+			const struct tomoyo_path_info *filename;
+			unsigned int mode;
+			unsigned int major;
+			unsigned int minor;
+			u8 operation;
+		} mkdev;
+		struct {
+			const struct tomoyo_path_info *filename;
+			unsigned long number;
+			u8 operation;
+		} path_number;
+		struct {
+			const struct tomoyo_path_info *type;
+			const struct tomoyo_path_info *dir;
+			const struct tomoyo_path_info *dev;
+			unsigned long flags;
+			int need_dev;
+		} mount;
+	} param;
+	u8 param_type;
+	bool granted;
+	u8 retry;
+	u8 profile;
+	u8 mode; /* One of tomoyo_mode_index . */
+	u8 type;
 };
 
 /*
@@ -174,45 +312,31 @@
 };
 
 /*
- * tomoyo_name_entry is a structure which is used for linking
+ * tomoyo_name is a structure which is used for linking
  * "struct tomoyo_path_info" into tomoyo_name_list .
  */
-struct tomoyo_name_entry {
+struct tomoyo_name {
 	struct list_head list;
 	atomic_t users;
 	struct tomoyo_path_info entry;
 };
 
-/*
- * tomoyo_path_info_with_data is a structure which is used for holding a
- * pathname obtained from "struct dentry" and "struct vfsmount" pair.
- *
- * "struct tomoyo_path_info_with_data" consists of "struct tomoyo_path_info"
- * and buffer for the pathname, while "struct tomoyo_page_buffer" consists of
- * buffer for the pathname only.
- *
- * "struct tomoyo_path_info_with_data" is intended to allow TOMOYO to release
- * both "struct tomoyo_path_info" and buffer for the pathname by single kfree()
- * so that we don't need to return two pointers to the caller. If the caller
- * puts "struct tomoyo_path_info" on stack memory, we will be able to remove
- * "struct tomoyo_path_info_with_data".
- */
-struct tomoyo_path_info_with_data {
-	/* Keep "head" first, for this pointer is passed to kfree(). */
-	struct tomoyo_path_info head;
-	char barrier1[16]; /* Safeguard for overrun. */
-	char body[TOMOYO_MAX_PATHNAME_LEN];
-	char barrier2[16]; /* Safeguard for overrun. */
-};
-
 struct tomoyo_name_union {
 	const struct tomoyo_path_info *filename;
-	struct tomoyo_path_group *group;
+	struct tomoyo_group *group;
 	u8 is_group;
 };
 
-/* Structure for "path_group" directive. */
-struct tomoyo_path_group {
+struct tomoyo_number_union {
+	unsigned long values[2];
+	struct tomoyo_group *group;
+	u8 min_type;
+	u8 max_type;
+	u8 is_group;
+};
+
+/* Structure for "path_group"/"number_group" directive. */
+struct tomoyo_group {
 	struct list_head list;
 	const struct tomoyo_path_info *group_name;
 	struct list_head member_list;
@@ -220,28 +344,35 @@
 };
 
 /* Structure for "path_group" directive. */
-struct tomoyo_path_group_member {
-	struct list_head list;
-	bool is_deleted;
+struct tomoyo_path_group {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *member_name;
 };
 
+/* Structure for "number_group" directive. */
+struct tomoyo_number_group {
+	struct tomoyo_acl_head head;
+	struct tomoyo_number_union number;
+};
+
 /*
  * tomoyo_acl_info is a structure which is used for holding
  *
  *  (1) "list" which is linked to the ->acl_info_list of
  *      "struct tomoyo_domain_info"
- *  (2) "type" which tells type of the entry (either
- *      "struct tomoyo_path_acl" or "struct tomoyo_path2_acl").
+ *  (2) "is_deleted" is a bool which is true if this domain is marked as
+ *      "deleted", false otherwise.
+ *  (3) "type" which tells type of the entry.
  *
  * Packing "struct tomoyo_acl_info" allows
- * "struct tomoyo_path_acl" to embed "u8" + "u16" and
- * "struct tomoyo_path2_acl" to embed "u8"
- * without enlarging their structure size.
+ * "struct tomoyo_path_acl" to embed "u16" and "struct tomoyo_path2_acl"
+ * "struct tomoyo_path_number_acl" "struct tomoyo_mkdev_acl" to embed
+ * "u8" without enlarging their structure size.
  */
 struct tomoyo_acl_info {
 	struct list_head list;
-	u8 type;
+	bool is_deleted;
+	u8 type; /* = one of values in "enum tomoyo_acl_entry_type_index". */
 } __packed;
 
 /*
@@ -299,20 +430,62 @@
  *  (3) "name" is the pathname.
  *
  * Directives held by this structure are "allow_read/write", "allow_execute",
- * "allow_read", "allow_write", "allow_create", "allow_unlink", "allow_mkdir",
- * "allow_rmdir", "allow_mkfifo", "allow_mksock", "allow_mkblock",
- * "allow_mkchar", "allow_truncate", "allow_symlink", "allow_rewrite",
- * "allow_chmod", "allow_chown", "allow_chgrp", "allow_chroot", "allow_mount"
- * and "allow_unmount".
+ * "allow_read", "allow_write", "allow_unlink", "allow_rmdir",
+ * "allow_truncate", "allow_symlink", "allow_rewrite", "allow_chroot" and
+ * "allow_unmount".
  */
 struct tomoyo_path_acl {
 	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_PATH_ACL */
-	u8 perm_high;
 	u16 perm;
 	struct tomoyo_name_union name;
 };
 
 /*
+ * tomoyo_path_number_acl is a structure which is used for holding an
+ * entry with one pathname and one number operation.
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "name" is the pathname.
+ *  (4) "number" is the numeric value.
+ *
+ * Directives held by this structure are "allow_create", "allow_mkdir",
+ * "allow_ioctl", "allow_mkfifo", "allow_mksock", "allow_chmod", "allow_chown"
+ * and "allow_chgrp".
+ *
+ */
+struct tomoyo_path_number_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_PATH_NUMBER_ACL */
+	u8 perm;
+	struct tomoyo_name_union name;
+	struct tomoyo_number_union number;
+};
+
+/*
+ * tomoyo_mkdev_acl is a structure which is used for holding an
+ * entry with one pathname and three numbers operation.
+ * It has following fields.
+ *
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "perm" which is a bitmask of permitted operations.
+ *  (3) "mode" is the create mode.
+ *  (4) "major" is the major number of device node.
+ *  (5) "minor" is the minor number of device node.
+ *
+ * Directives held by this structure are "allow_mkchar", "allow_mkblock".
+ *
+ */
+struct tomoyo_mkdev_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_MKDEV_ACL */
+	u8 perm;
+	struct tomoyo_name_union name;
+	struct tomoyo_number_union mode;
+	struct tomoyo_number_union major;
+	struct tomoyo_number_union minor;
+};
+
+/*
  * tomoyo_path2_acl is a structure which is used for holding an
  * entry with two pathnames operation (i.e. link(), rename() and pivot_root()).
  * It has following fields.
@@ -333,53 +506,61 @@
 };
 
 /*
- * tomoyo_io_buffer is a structure which is used for reading and modifying
- * configuration via /sys/kernel/security/tomoyo/ interface.
- * It has many fields. ->read_var1 , ->read_var2 , ->write_var1 are used as
- * cursors.
+ * tomoyo_mount_acl is a structure which is used for holding an
+ * entry for mount operation.
+ * It has following fields.
  *
- * Since the content of /sys/kernel/security/tomoyo/domain_policy is a list of
- * "struct tomoyo_domain_info" entries and each "struct tomoyo_domain_info"
- * entry has a list of "struct tomoyo_acl_info", we need two cursors when
- * reading (one is for traversing tomoyo_domain_list and the other is for
- * traversing "struct tomoyo_acl_info"->acl_info_list ).
+ *  (1) "head" which is a "struct tomoyo_acl_info".
+ *  (2) "dev_name" is the device name.
+ *  (3) "dir_name" is the mount point.
+ *  (4) "fs_type" is the filesystem type.
+ *  (5) "flags" is the mount flags.
  *
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * "select ", TOMOYO seeks the cursor ->read_var1 and ->write_var1 to the
- * domain with the domainname specified by the rest of that line (NULL is set
- * if seek failed).
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * "delete ", TOMOYO deletes an entry or a domain specified by the rest of that
- * line (->write_var1 is set to NULL if a domain was deleted).
- * If a line written to /sys/kernel/security/tomoyo/domain_policy starts with
- * neither "select " nor "delete ", an entry or a domain specified by that line
- * is appended.
+ * Directive held by this structure is "allow_mount".
+ */
+struct tomoyo_mount_acl {
+	struct tomoyo_acl_info head; /* type = TOMOYO_TYPE_MOUNT_ACL */
+	struct tomoyo_name_union dev_name;
+	struct tomoyo_name_union dir_name;
+	struct tomoyo_name_union fs_type;
+	struct tomoyo_number_union flags;
+};
+
+#define TOMOYO_MAX_IO_READ_QUEUE 32
+
+/*
+ * Structure for reading/writing policy via /sys/kernel/security/tomoyo
+ * interfaces.
  */
 struct tomoyo_io_buffer {
-	int (*read) (struct tomoyo_io_buffer *);
+	void (*read) (struct tomoyo_io_buffer *);
 	int (*write) (struct tomoyo_io_buffer *);
+	int (*poll) (struct file *file, poll_table *wait);
 	/* Exclusive lock for this structure.   */
 	struct mutex io_sem;
 	/* Index returned by tomoyo_read_lock(). */
 	int reader_idx;
-	/* The position currently reading from. */
-	struct list_head *read_var1;
-	/* Extra variables for reading.         */
-	struct list_head *read_var2;
+	char __user *read_user_buf;
+	int read_user_buf_avail;
+	struct {
+		struct list_head *domain;
+		struct list_head *group;
+		struct list_head *acl;
+		int avail;
+		int step;
+		int query_index;
+		u16 index;
+		u8 bit;
+		u8 w_pos;
+		bool eof;
+		bool print_this_domain_only;
+		bool print_execute_only;
+		const char *w[TOMOYO_MAX_IO_READ_QUEUE];
+	} r;
 	/* The position currently writing to.   */
 	struct tomoyo_domain_info *write_var1;
-	/* The step for reading.                */
-	int read_step;
 	/* Buffer for reading.                  */
 	char *read_buf;
-	/* EOF flag for reading.                */
-	bool read_eof;
-	/* Read domain ACL of specified PID?    */
-	bool read_single_domain;
-	/* Extra variable for reading.          */
-	u8 read_bit;
-	/* Bytes available for reading.         */
-	int read_avail;
 	/* Size of read buffer.                 */
 	int readbuf_size;
 	/* Buffer for writing.                  */
@@ -388,215 +569,203 @@
 	int write_avail;
 	/* Size of write buffer.                */
 	int writebuf_size;
+	/* Type of this interface.              */
+	u8 type;
 };
 
 /*
- * tomoyo_globally_readable_file_entry is a structure which is used for holding
+ * tomoyo_readable_file is a structure which is used for holding
  * "allow_read" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_globally_readable_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "filename" is a pathname which is allowed to open(O_RDONLY).
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_globally_readable_file_entry {
-	struct list_head list;
+struct tomoyo_readable_file {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *filename;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_pattern_entry is a structure which is used for holding
- * "tomoyo_pattern_list" entries.
+ * tomoyo_no_pattern is a structure which is used for holding
+ * "file_pattern" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_pattern_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "pattern" is a pathname pattern which is used for converting pathnames
  *      to pathname patterns during learning mode.
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_pattern_entry {
-	struct list_head list;
+struct tomoyo_no_pattern {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *pattern;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_no_rewrite_entry is a structure which is used for holding
+ * tomoyo_no_rewrite is a structure which is used for holding
  * "deny_rewrite" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_no_rewrite_list .
+ *  (1) "head" is "struct tomoyo_acl_head".
  *  (2) "pattern" is a pathname which is by default not permitted to modify
  *      already existing content.
- *  (3) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
  */
-struct tomoyo_no_rewrite_entry {
-	struct list_head list;
+struct tomoyo_no_rewrite {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *pattern;
-	bool is_deleted;
 };
 
 /*
- * tomoyo_domain_initializer_entry is a structure which is used for holding
- * "initialize_domain" and "no_initialize_domain" entries.
+ * tomoyo_transition_control is a structure which is used for holding
+ * "initialize_domain"/"no_initialize_domain"/"keep_domain"/"no_keep_domain"
+ * entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_domain_initializer_list .
- *  (2) "domainname" which is "a domainname" or "the last component of a
- *      domainname". This field is NULL if "from" clause is not specified.
- *  (3) "program" which is a program's pathname.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
- *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
- *      otherwise.
- *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "type" is type of this entry.
+ *  (3) "is_last_name" is a bool which is true if "domainname" is "the last
  *      component of a domainname", false otherwise.
- */
-struct tomoyo_domain_initializer_entry {
-	struct list_head list;
-	const struct tomoyo_path_info *domainname;    /* This may be NULL */
-	const struct tomoyo_path_info *program;
-	bool is_deleted;
-	bool is_not;       /* True if this entry is "no_initialize_domain".  */
-	/* True if the domainname is tomoyo_get_last_name(). */
-	bool is_last_name;
-};
-
-/*
- * tomoyo_domain_keeper_entry is a structure which is used for holding
- * "keep_domain" and "no_keep_domain" entries.
- * It has following fields.
- *
- *  (1) "list" which is linked to tomoyo_domain_keeper_list .
- *  (2) "domainname" which is "a domainname" or "the last component of a
+ *  (4) "domainname" which is "a domainname" or "the last component of a
  *      domainname".
- *  (3) "program" which is a program's pathname.
- *      This field is NULL if "from" clause is not specified.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
- *  (5) "is_not" is a bool which is true if "no_initialize_domain", false
- *      otherwise.
- *  (6) "is_last_name" is a bool which is true if "domainname" is "the last
- *      component of a domainname", false otherwise.
+ *  (5) "program" which is a program's pathname.
  */
-struct tomoyo_domain_keeper_entry {
-	struct list_head list;
-	const struct tomoyo_path_info *domainname;
-	const struct tomoyo_path_info *program;       /* This may be NULL */
-	bool is_deleted;
-	bool is_not;       /* True if this entry is "no_keep_domain".        */
+struct tomoyo_transition_control {
+	struct tomoyo_acl_head head;
+	u8 type; /* One of values in "enum tomoyo_transition_type".  */
 	/* True if the domainname is tomoyo_get_last_name(). */
 	bool is_last_name;
+	const struct tomoyo_path_info *domainname; /* Maybe NULL */
+	const struct tomoyo_path_info *program;    /* Maybe NULL */
 };
 
 /*
- * tomoyo_alias_entry is a structure which is used for holding "alias" entries.
+ * tomoyo_aggregator is a structure which is used for holding
+ * "aggregator" entries.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_alias_list .
- *  (2) "original_name" which is a dereferenced pathname.
- *  (3) "aliased_name" which is a symlink's pathname.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "original_name" which is originally requested name.
+ *  (3) "aggregated_name" which is name to rewrite.
  */
-struct tomoyo_alias_entry {
-	struct list_head list;
+struct tomoyo_aggregator {
+	struct tomoyo_acl_head head;
 	const struct tomoyo_path_info *original_name;
-	const struct tomoyo_path_info *aliased_name;
-	bool is_deleted;
+	const struct tomoyo_path_info *aggregated_name;
 };
 
 /*
- * tomoyo_policy_manager_entry is a structure which is used for holding list of
+ * tomoyo_manager is a structure which is used for holding list of
  * domainnames or programs which are permitted to modify configuration via
  * /sys/kernel/security/tomoyo/ interface.
  * It has following fields.
  *
- *  (1) "list" which is linked to tomoyo_policy_manager_list .
- *  (2) "manager" is a domainname or a program's pathname.
- *  (3) "is_domain" is a bool which is true if "manager" is a domainname, false
+ *  (1) "head" is "struct tomoyo_acl_head".
+ *  (2) "is_domain" is a bool which is true if "manager" is a domainname, false
  *      otherwise.
- *  (4) "is_deleted" is a bool which is true if marked as deleted, false
- *      otherwise.
+ *  (3) "manager" is a domainname or a program's pathname.
  */
-struct tomoyo_policy_manager_entry {
-	struct list_head list;
+struct tomoyo_manager {
+	struct tomoyo_acl_head head;
+	bool is_domain;  /* True if manager is a domainname. */
 	/* A path to program or a domainname. */
 	const struct tomoyo_path_info *manager;
-	bool is_domain;  /* True if manager is a domainname. */
-	bool is_deleted; /* True if this entry is deleted. */
+};
+
+struct tomoyo_preference {
+	unsigned int learning_max_entry;
+	bool enforcing_verbose;
+	bool learning_verbose;
+	bool permissive_verbose;
+};
+
+struct tomoyo_profile {
+	const struct tomoyo_path_info *comment;
+	struct tomoyo_preference *learning;
+	struct tomoyo_preference *permissive;
+	struct tomoyo_preference *enforcing;
+	struct tomoyo_preference preference;
+	u8 default_config;
+	u8 config[TOMOYO_MAX_MAC_INDEX + TOMOYO_MAX_MAC_CATEGORY_INDEX];
 };
 
 /********** Function prototypes. **********/
 
-/* Check whether the given name matches the given name_union. */
-bool tomoyo_compare_name_union(const struct tomoyo_path_info *name,
-			       const struct tomoyo_name_union *ptr);
+extern asmlinkage long sys_getpid(void);
+extern asmlinkage long sys_getppid(void);
+
+/* Check whether the given string starts with the given keyword. */
+bool tomoyo_str_starts(char **src, const char *find);
+/* Get tomoyo_realpath() of current process. */
+const char *tomoyo_get_exe(void);
+/* Format string. */
+void tomoyo_normalize_line(unsigned char *buffer);
+/* Print warning or error message on console. */
+void tomoyo_warn_log(struct tomoyo_request_info *r, const char *fmt, ...)
+     __attribute__ ((format(printf, 2, 3)));
+/* Check all profiles currently assigned to domains are defined. */
+void tomoyo_check_profile(void);
+/* Open operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_open_control(const u8 type, struct file *file);
+/* Close /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_close_control(struct file *file);
+/* Poll operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_poll_control(struct file *file, poll_table *wait);
+/* Read operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_read_control(struct file *file, char __user *buffer,
+			const int buffer_len);
+/* Write operation for /sys/kernel/security/tomoyo/ interface. */
+int tomoyo_write_control(struct file *file, const char __user *buffer,
+			 const int buffer_len);
 /* Check whether the domain has too many ACL entries to hold. */
-bool tomoyo_domain_quota_is_ok(struct tomoyo_domain_info * const domain);
-/* Transactional sprintf() for policy dump. */
-bool tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
+bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r);
+/* Print out of memory warning message. */
+void tomoyo_warn_oom(const char *function);
+/* Check whether the given name matches the given name_union. */
+const struct tomoyo_path_info *
+tomoyo_compare_name_union(const struct tomoyo_path_info *name,
+			  const struct tomoyo_name_union *ptr);
+/* Check whether the given number matches the given number_union. */
+bool tomoyo_compare_number_union(const unsigned long value,
+				 const struct tomoyo_number_union *ptr);
+int tomoyo_get_mode(const u8 profile, const u8 index);
+void tomoyo_io_printf(struct tomoyo_io_buffer *head, const char *fmt, ...)
 	__attribute__ ((format(printf, 2, 3)));
 /* Check whether the domainname is correct. */
-bool tomoyo_is_correct_domain(const unsigned char *domainname);
+bool tomoyo_correct_domain(const unsigned char *domainname);
 /* Check whether the token is correct. */
-bool tomoyo_is_correct_path(const char *filename, const s8 start_type,
-			    const s8 pattern_type, const s8 end_type);
+bool tomoyo_correct_path(const char *filename);
+bool tomoyo_correct_word(const char *string);
 /* Check whether the token can be a domainname. */
-bool tomoyo_is_domain_def(const unsigned char *buffer);
+bool tomoyo_domain_def(const unsigned char *buffer);
 bool tomoyo_parse_name_union(const char *filename,
 			     struct tomoyo_name_union *ptr);
 /* Check whether the given filename matches the given path_group. */
-bool tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
-			       const struct tomoyo_path_group *group,
-			       const bool may_use_pattern);
+const struct tomoyo_path_info *
+tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
+			  const struct tomoyo_group *group);
+/* Check whether the given value matches the given number_group. */
+bool tomoyo_number_matches_group(const unsigned long min,
+				 const unsigned long max,
+				 const struct tomoyo_group *group);
 /* Check whether the given filename matches the given pattern. */
 bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
 				 const struct tomoyo_path_info *pattern);
-/* Read "alias" entry in exception policy. */
-bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head);
-/*
- * Read "initialize_domain" and "no_initialize_domain" entry
- * in exception policy.
- */
-bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head);
-/* Read "keep_domain" and "no_keep_domain" entry in exception policy. */
-bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head);
-/* Read "file_pattern" entry in exception policy. */
-bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head);
-/* Read "path_group" entry in exception policy. */
-bool tomoyo_read_path_group_policy(struct tomoyo_io_buffer *head);
-/* Read "allow_read" entry in exception policy. */
-bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head);
-/* Read "deny_rewrite" entry in exception policy. */
-bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head);
+
+bool tomoyo_parse_number_union(char *data, struct tomoyo_number_union *num);
 /* Tokenize a line. */
 bool tomoyo_tokenize(char *buffer, char *w[], size_t size);
 /* Write domain policy violation warning message to console? */
 bool tomoyo_verbose_mode(const struct tomoyo_domain_info *domain);
-/* Convert double path operation to operation name. */
-const char *tomoyo_path22keyword(const u8 operation);
-/* Get the last component of the given domainname. */
-const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain);
-/* Get warning message. */
-const char *tomoyo_get_msg(const bool is_enforce);
-/* Convert single path operation to operation name. */
-const char *tomoyo_path2keyword(const u8 operation);
-/* Create "alias" entry in exception policy. */
-int tomoyo_write_alias_policy(char *data, const bool is_delete);
-/*
- * Create "initialize_domain" and "no_initialize_domain" entry
- * in exception policy.
- */
-int tomoyo_write_domain_initializer_policy(char *data, const bool is_not,
-					   const bool is_delete);
-/* Create "keep_domain" and "no_keep_domain" entry in exception policy. */
-int tomoyo_write_domain_keeper_policy(char *data, const bool is_not,
-				      const bool is_delete);
+/* Fill "struct tomoyo_request_info". */
+int tomoyo_init_request_info(struct tomoyo_request_info *r,
+			     struct tomoyo_domain_info *domain,
+			     const u8 index);
+/* Check permission for mount operation. */
+int tomoyo_mount_permission(char *dev_name, struct path *path, char *type,
+			    unsigned long flags, void *data_page);
+/* Create "aggregator" entry in exception policy. */
+int tomoyo_write_aggregator(char *data, const bool is_delete);
+int tomoyo_write_transition_control(char *data, const bool is_delete,
+				    const u8 type);
 /*
  * Create "allow_read/write", "allow_execute", "allow_read", "allow_write",
  * "allow_create", "allow_unlink", "allow_mkdir", "allow_rmdir",
@@ -604,25 +773,31 @@
  * "allow_truncate", "allow_symlink", "allow_rewrite", "allow_rename" and
  * "allow_link" entry in domain policy.
  */
-int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain,
-			     const bool is_delete);
+int tomoyo_write_file(char *data, struct tomoyo_domain_info *domain,
+		      const bool is_delete);
 /* Create "allow_read" entry in exception policy. */
-int tomoyo_write_globally_readable_policy(char *data, const bool is_delete);
+int tomoyo_write_globally_readable(char *data, const bool is_delete);
+/* Create "allow_mount" entry in domain policy. */
+int tomoyo_write_mount(char *data, struct tomoyo_domain_info *domain,
+		       const bool is_delete);
 /* Create "deny_rewrite" entry in exception policy. */
-int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete);
+int tomoyo_write_no_rewrite(char *data, const bool is_delete);
 /* Create "file_pattern" entry in exception policy. */
-int tomoyo_write_pattern_policy(char *data, const bool is_delete);
-/* Create "path_group" entry in exception policy. */
-int tomoyo_write_path_group_policy(char *data, const bool is_delete);
+int tomoyo_write_pattern(char *data, const bool is_delete);
+/* Create "path_group"/"number_group" entry in exception policy. */
+int tomoyo_write_group(char *data, const bool is_delete, const u8 type);
+int tomoyo_supervisor(struct tomoyo_request_info *r, const char *fmt, ...)
+     __attribute__ ((format(printf, 2, 3)));
 /* Find a domain by the given name. */
 struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname);
 /* Find or create a domain by the given name. */
-struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
-							    domainname,
-							    const u8 profile);
-
-/* Allocate memory for "struct tomoyo_path_group". */
-struct tomoyo_path_group *tomoyo_get_path_group(const char *group_name);
+struct tomoyo_domain_info *tomoyo_assign_domain(const char *domainname,
+						const u8 profile);
+struct tomoyo_profile *tomoyo_profile(const u8 profile);
+/*
+ * Allocate memory for "struct tomoyo_path_group"/"struct tomoyo_number_group".
+ */
+struct tomoyo_group *tomoyo_get_group(const char *group_name, const u8 type);
 
 /* Check mode for specified functionality. */
 unsigned int tomoyo_check_flags(const struct tomoyo_domain_info *domain,
@@ -632,25 +807,23 @@
 /* Run policy loader when /sbin/init starts. */
 void tomoyo_load_policy(const char *filename);
 
+void tomoyo_put_number_union(struct tomoyo_number_union *ptr);
+
 /* Convert binary string to ascii string. */
-int tomoyo_encode(char *buffer, int buflen, const char *str);
-
-/* Returns realpath(3) of the given pathname but ignores chroot'ed root. */
-int tomoyo_realpath_from_path2(struct path *path, char *newname,
-			       int newname_len);
+char *tomoyo_encode(const char *str);
 
 /*
- * Returns realpath(3) of the given pathname but ignores chroot'ed root.
- * These functions use kzalloc(), so the caller must call kfree()
- * if these functions didn't return NULL.
- */
-char *tomoyo_realpath(const char *pathname);
-/*
- * Same with tomoyo_realpath() except that it doesn't follow the final symlink.
+ * Returns realpath(3) of the given pathname except that
+ * ignores chroot'ed root and does not follow the final symlink.
  */
 char *tomoyo_realpath_nofollow(const char *pathname);
-/* Same with tomoyo_realpath() except that the pathname is already solved. */
+/*
+ * Returns realpath(3) of the given pathname except that
+ * ignores chroot'ed root and the pathname is already solved.
+ */
 char *tomoyo_realpath_from_path(struct path *path);
+/* Get patterned pathname. */
+const char *tomoyo_pattern(const struct tomoyo_path_info *filename);
 
 /* Check memory quota. */
 bool tomoyo_memory_ok(void *ptr);
@@ -663,23 +836,29 @@
 const struct tomoyo_path_info *tomoyo_get_name(const char *name);
 
 /* Check for memory usage. */
-int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head);
+void tomoyo_read_memory_counter(struct tomoyo_io_buffer *head);
 
 /* Set memory quota. */
 int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head);
 
-/* Initialize realpath related code. */
-void __init tomoyo_realpath_init(void);
-int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
+/* Initialize mm related code. */
+void __init tomoyo_mm_init(void);
+int tomoyo_path_permission(struct tomoyo_request_info *r, u8 operation,
 			   const struct tomoyo_path_info *filename);
 int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
 				 struct path *path, const int flag);
+int tomoyo_path_number_perm(const u8 operation, struct path *path,
+			    unsigned long number);
+int tomoyo_mkdev_perm(const u8 operation, struct path *path,
+		      const unsigned int mode, unsigned int dev);
 int tomoyo_path_perm(const u8 operation, struct path *path);
 int tomoyo_path2_perm(const u8 operation, struct path *path1,
 		      struct path *path2);
-int tomoyo_check_rewrite_permission(struct file *filp);
 int tomoyo_find_next_domain(struct linux_binprm *bprm);
 
+void tomoyo_print_ulong(char *buffer, const int buffer_len,
+			const unsigned long value, const u8 type);
+
 /* Drop refcount on tomoyo_name_union. */
 void tomoyo_put_name_union(struct tomoyo_name_union *ptr);
 
@@ -688,6 +867,25 @@
 
 void tomoyo_memory_free(void *ptr);
 
+int tomoyo_update_domain(struct tomoyo_acl_info *new_entry, const int size,
+			 bool is_delete, struct tomoyo_domain_info *domain,
+			 bool (*check_duplicate) (const struct tomoyo_acl_info
+						  *,
+						  const struct tomoyo_acl_info
+						  *),
+			 bool (*merge_duplicate) (struct tomoyo_acl_info *,
+						  struct tomoyo_acl_info *,
+						  const bool));
+int tomoyo_update_policy(struct tomoyo_acl_head *new_entry, const int size,
+			 bool is_delete, struct list_head *list,
+			 bool (*check_duplicate) (const struct tomoyo_acl_head
+						  *,
+						  const struct tomoyo_acl_head
+						  *));
+void tomoyo_check_acl(struct tomoyo_request_info *r,
+		      bool (*check_entry) (struct tomoyo_request_info *,
+					   const struct tomoyo_acl_info *));
+
 /********** External variable definitions. **********/
 
 /* Lock for GC. */
@@ -696,14 +894,8 @@
 /* The list for "struct tomoyo_domain_info". */
 extern struct list_head tomoyo_domain_list;
 
-extern struct list_head tomoyo_path_group_list;
-extern struct list_head tomoyo_domain_initializer_list;
-extern struct list_head tomoyo_domain_keeper_list;
-extern struct list_head tomoyo_alias_list;
-extern struct list_head tomoyo_globally_readable_list;
-extern struct list_head tomoyo_pattern_list;
-extern struct list_head tomoyo_no_rewrite_list;
-extern struct list_head tomoyo_policy_manager_list;
+extern struct list_head tomoyo_policy_list[TOMOYO_MAX_POLICY];
+extern struct list_head tomoyo_group_list[TOMOYO_MAX_GROUP];
 extern struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
 
 /* Lock for protecting policy. */
@@ -715,6 +907,14 @@
 /* The kernel's domain. */
 extern struct tomoyo_domain_info tomoyo_kernel_domain;
 
+extern const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION];
+extern const char *tomoyo_mkdev_keyword[TOMOYO_MAX_MKDEV_OPERATION];
+extern const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION];
+extern const char *tomoyo_path_number_keyword[TOMOYO_MAX_PATH_NUMBER_OPERATION];
+
+extern unsigned int tomoyo_quota_for_query;
+extern unsigned int tomoyo_query_memory_size;
+
 /********** Inlined functions. **********/
 
 static inline int tomoyo_read_lock(void)
@@ -735,25 +935,25 @@
 }
 
 /**
- * tomoyo_is_valid - Check whether the character is a valid char.
+ * tomoyo_valid - Check whether the character is a valid char.
  *
  * @c: The character to check.
  *
  * Returns true if @c is a valid character, false otherwise.
  */
-static inline bool tomoyo_is_valid(const unsigned char c)
+static inline bool tomoyo_valid(const unsigned char c)
 {
 	return c > ' ' && c < 127;
 }
 
 /**
- * tomoyo_is_invalid - Check whether the character is an invalid char.
+ * tomoyo_invalid - Check whether the character is an invalid char.
  *
  * @c: The character to check.
  *
  * Returns true if @c is an invalid character, false otherwise.
  */
-static inline bool tomoyo_is_invalid(const unsigned char c)
+static inline bool tomoyo_invalid(const unsigned char c)
 {
 	return c && (c <= ' ' || c >= 127);
 }
@@ -761,13 +961,13 @@
 static inline void tomoyo_put_name(const struct tomoyo_path_info *name)
 {
 	if (name) {
-		struct tomoyo_name_entry *ptr =
-			container_of(name, struct tomoyo_name_entry, entry);
+		struct tomoyo_name *ptr =
+			container_of(name, typeof(*ptr), entry);
 		atomic_dec(&ptr->users);
 	}
 }
 
-static inline void tomoyo_put_path_group(struct tomoyo_path_group *group)
+static inline void tomoyo_put_group(struct tomoyo_group *group)
 {
 	if (group)
 		atomic_dec(&group->users);
@@ -784,75 +984,35 @@
 	return task_cred_xxx(task, security);
 }
 
-static inline bool tomoyo_is_same_acl_head(const struct tomoyo_acl_info *p1,
+static inline bool tomoyo_same_acl_head(const struct tomoyo_acl_info *p1,
 					   const struct tomoyo_acl_info *p2)
 {
 	return p1->type == p2->type;
 }
 
-static inline bool tomoyo_is_same_name_union
+static inline bool tomoyo_same_name_union
 (const struct tomoyo_name_union *p1, const struct tomoyo_name_union *p2)
 {
 	return p1->filename == p2->filename && p1->group == p2->group &&
 		p1->is_group == p2->is_group;
 }
 
-static inline bool tomoyo_is_same_path_acl(const struct tomoyo_path_acl *p1,
-					   const struct tomoyo_path_acl *p2)
+static inline bool tomoyo_same_number_union
+(const struct tomoyo_number_union *p1, const struct tomoyo_number_union *p2)
 {
-	return tomoyo_is_same_acl_head(&p1->head, &p2->head) &&
-		tomoyo_is_same_name_union(&p1->name, &p2->name);
-}
-
-static inline bool tomoyo_is_same_path2_acl(const struct tomoyo_path2_acl *p1,
-					    const struct tomoyo_path2_acl *p2)
-{
-	return tomoyo_is_same_acl_head(&p1->head, &p2->head) &&
-		tomoyo_is_same_name_union(&p1->name1, &p2->name1) &&
-		tomoyo_is_same_name_union(&p1->name2, &p2->name2);
-}
-
-static inline bool tomoyo_is_same_domain_initializer_entry
-(const struct tomoyo_domain_initializer_entry *p1,
- const struct tomoyo_domain_initializer_entry *p2)
-{
-	return p1->is_not == p2->is_not && p1->is_last_name == p2->is_last_name
-		&& p1->domainname == p2->domainname
-		&& p1->program == p2->program;
-}
-
-static inline bool tomoyo_is_same_domain_keeper_entry
-(const struct tomoyo_domain_keeper_entry *p1,
- const struct tomoyo_domain_keeper_entry *p2)
-{
-	return p1->is_not == p2->is_not && p1->is_last_name == p2->is_last_name
-		&& p1->domainname == p2->domainname
-		&& p1->program == p2->program;
-}
-
-static inline bool tomoyo_is_same_alias_entry
-(const struct tomoyo_alias_entry *p1, const struct tomoyo_alias_entry *p2)
-{
-	return p1->original_name == p2->original_name &&
-		p1->aliased_name == p2->aliased_name;
+	return p1->values[0] == p2->values[0] && p1->values[1] == p2->values[1]
+		&& p1->group == p2->group && p1->min_type == p2->min_type &&
+		p1->max_type == p2->max_type && p1->is_group == p2->is_group;
 }
 
 /**
  * list_for_each_cookie - iterate over a list with cookie.
  * @pos:        the &struct list_head to use as a loop cursor.
- * @cookie:     the &struct list_head to use as a cookie.
  * @head:       the head for your list.
- *
- * Same with list_for_each_rcu() except that this primitive uses @cookie
- * so that we can continue iteration.
- * @cookie must be NULL when iteration starts, and @cookie will become
- * NULL when iteration finishes.
  */
-#define list_for_each_cookie(pos, cookie, head)				\
-	for (({ if (!cookie)						\
-				     cookie = head; }),			\
-		     pos = rcu_dereference((cookie)->next);		\
-	     prefetch(pos->next), pos != (head) || ((cookie) = NULL);	\
-	     (cookie) = pos, pos = rcu_dereference(pos->next))
+#define list_for_each_cookie(pos, head)					\
+	if (!pos)							\
+		pos =  srcu_dereference((head)->next, &tomoyo_ss);	\
+	for ( ; pos != (head); pos = srcu_dereference(pos->next, &tomoyo_ss))
 
 #endif /* !defined(_SECURITY_TOMOYO_COMMON_H) */
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index cd8ba44..3538840 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -1,12 +1,9 @@
 /*
  * security/tomoyo/domain.c
  *
- * Implementation of the Domain-Based Mandatory Access Control.
+ * Domain transition functions for TOMOYO.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include "common.h"
@@ -18,366 +15,191 @@
 /* The initial domain. */
 struct tomoyo_domain_info tomoyo_kernel_domain;
 
-/*
- * tomoyo_domain_list is used for holding list of domains.
- * The ->acl_info_list of "struct tomoyo_domain_info" is used for holding
- * permissions (e.g. "allow_read /lib/libc-2.5.so") given to each domain.
- *
- * An entry is added by
- *
- * # ( echo "<kernel>"; echo "allow_execute /sbin/init" ) > \
- *                                  /sys/kernel/security/tomoyo/domain_policy
- *
- * and is deleted by
- *
- * # ( echo "<kernel>"; echo "delete allow_execute /sbin/init" ) > \
- *                                  /sys/kernel/security/tomoyo/domain_policy
- *
- * and all entries are retrieved by
- *
- * # cat /sys/kernel/security/tomoyo/domain_policy
- *
- * A domain is added by
- *
- * # echo "<kernel>" > /sys/kernel/security/tomoyo/domain_policy
- *
- * and is deleted by
- *
- * # echo "delete <kernel>" > /sys/kernel/security/tomoyo/domain_policy
- *
- * and all domains are retrieved by
- *
- * # grep '^<kernel>' /sys/kernel/security/tomoyo/domain_policy
- *
- * Normally, a domainname is monotonically getting longer because a domainname
- * which the process will belong to if an execve() operation succeeds is
- * defined as a concatenation of "current domainname" + "pathname passed to
- * execve()".
- * See tomoyo_domain_initializer_list and tomoyo_domain_keeper_list for
- * exceptions.
- */
-LIST_HEAD(tomoyo_domain_list);
-
 /**
- * tomoyo_get_last_name - Get last component of a domainname.
+ * tomoyo_update_policy - Update an entry for exception policy.
  *
- * @domain: Pointer to "struct tomoyo_domain_info".
- *
- * Returns the last component of the domainname.
- */
-const char *tomoyo_get_last_name(const struct tomoyo_domain_info *domain)
-{
-	const char *cp0 = domain->domainname->name;
-	const char *cp1 = strrchr(cp0, ' ');
-
-	if (cp1)
-		return cp1 + 1;
-	return cp0;
-}
-
-/*
- * tomoyo_domain_initializer_list is used for holding list of programs which
- * triggers reinitialization of domainname. Normally, a domainname is
- * monotonically getting longer. But sometimes, we restart daemon programs.
- * It would be convenient for us that "a daemon started upon system boot" and
- * "the daemon restarted from console" belong to the same domain. Thus, TOMOYO
- * provides a way to shorten domainnames.
- *
- * An entry is added by
- *
- * # echo 'initialize_domain /usr/sbin/httpd' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete initialize_domain /usr/sbin/httpd' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^initialize_domain /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, /usr/sbin/httpd will belong to
- * "<kernel> /usr/sbin/httpd" domain.
- *
- * You may specify a domainname using "from" keyword.
- * "initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
- * will cause "/usr/sbin/httpd" executed from "<kernel> /etc/rc.d/init.d/httpd"
- * domain to belong to "<kernel> /usr/sbin/httpd" domain.
- *
- * You may add "no_" prefix to "initialize_domain".
- * "initialize_domain /usr/sbin/httpd" and
- * "no_initialize_domain /usr/sbin/httpd from <kernel> /etc/rc.d/init.d/httpd"
- * will cause "/usr/sbin/httpd" to belong to "<kernel> /usr/sbin/httpd" domain
- * unless executed from "<kernel> /etc/rc.d/init.d/httpd" domain.
- */
-LIST_HEAD(tomoyo_domain_initializer_list);
-
-/**
- * tomoyo_update_domain_initializer_entry - Update "struct tomoyo_domain_initializer_entry" list.
- *
- * @domainname: The name of domain. May be NULL.
- * @program:    The name of program.
- * @is_not:     True if it is "no_initialize_domain" entry.
- * @is_delete:  True if it is a delete request.
+ * @new_entry:       Pointer to "struct tomoyo_acl_info".
+ * @size:            Size of @new_entry in bytes.
+ * @is_delete:       True if it is a delete request.
+ * @list:            Pointer to "struct list_head".
+ * @check_duplicate: Callback function to find duplicated entry.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_domain_initializer_entry(const char *domainname,
-						  const char *program,
-						  const bool is_not,
-						  const bool is_delete)
+int tomoyo_update_policy(struct tomoyo_acl_head *new_entry, const int size,
+			 bool is_delete, struct list_head *list,
+			 bool (*check_duplicate) (const struct tomoyo_acl_head
+						  *,
+						  const struct tomoyo_acl_head
+						  *))
 {
-	struct tomoyo_domain_initializer_entry *ptr;
-	struct tomoyo_domain_initializer_entry e = { .is_not = is_not };
 	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_acl_head *entry;
 
-	if (!tomoyo_is_correct_path(program, 1, -1, -1))
-		return -EINVAL; /* No patterns allowed. */
-	if (domainname) {
-		if (!tomoyo_is_domain_def(domainname) &&
-		    tomoyo_is_correct_path(domainname, 1, -1, -1))
-			e.is_last_name = true;
-		else if (!tomoyo_is_correct_domain(domainname))
-			return -EINVAL;
-		e.domainname = tomoyo_get_name(domainname);
-		if (!e.domainname)
-			goto out;
-	}
-	e.program = tomoyo_get_name(program);
-	if (!e.program)
-		goto out;
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list, list) {
-		if (!tomoyo_is_same_domain_initializer_entry(ptr, &e))
+		return -ENOMEM;
+	list_for_each_entry_rcu(entry, list, list) {
+		if (!check_duplicate(entry, new_entry))
 			continue;
-		ptr->is_deleted = is_delete;
+		entry->is_deleted = is_delete;
 		error = 0;
 		break;
 	}
-	if (!is_delete && error) {
-		struct tomoyo_domain_initializer_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
+	if (error && !is_delete) {
+		entry = tomoyo_commit_ok(new_entry, size);
 		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_domain_initializer_list);
+			list_add_tail_rcu(&entry->list, list);
 			error = 0;
 		}
 	}
 	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(e.domainname);
-	tomoyo_put_name(e.program);
 	return error;
 }
 
 /**
- * tomoyo_read_domain_initializer_policy - Read "struct tomoyo_domain_initializer_entry" list.
+ * tomoyo_update_domain - Update an entry for domain policy.
  *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_domain_initializer_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_domain_initializer_list) {
-		const char *no;
-		const char *from = "";
-		const char *domain = "";
-		struct tomoyo_domain_initializer_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_domain_initializer_entry,
-				  list);
-		if (ptr->is_deleted)
-			continue;
-		no = ptr->is_not ? "no_" : "";
-		if (ptr->domainname) {
-			from = " from ";
-			domain = ptr->domainname->name;
-		}
-		done = tomoyo_io_printf(head,
-					"%s" TOMOYO_KEYWORD_INITIALIZE_DOMAIN
-					"%s%s%s\n", no, ptr->program->name,
-					from, domain);
-		if (!done)
-			break;
-	}
-	return done;
-}
-
-/**
- * tomoyo_write_domain_initializer_policy - Write "struct tomoyo_domain_initializer_entry" list.
- *
- * @data:      String to parse.
- * @is_not:    True if it is "no_initialize_domain" entry.
- * @is_delete: True if it is a delete request.
+ * @new_entry:       Pointer to "struct tomoyo_acl_info".
+ * @size:            Size of @new_entry in bytes.
+ * @is_delete:       True if it is a delete request.
+ * @domain:          Pointer to "struct tomoyo_domain_info".
+ * @check_duplicate: Callback function to find duplicated entry.
+ * @merge_duplicate: Callback function to merge duplicated entry.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_domain_initializer_policy(char *data, const bool is_not,
-					   const bool is_delete)
+int tomoyo_update_domain(struct tomoyo_acl_info *new_entry, const int size,
+			 bool is_delete, struct tomoyo_domain_info *domain,
+			 bool (*check_duplicate) (const struct tomoyo_acl_info
+						  *,
+						  const struct tomoyo_acl_info
+						  *),
+			 bool (*merge_duplicate) (struct tomoyo_acl_info *,
+						  struct tomoyo_acl_info *,
+						  const bool))
 {
-	char *cp = strstr(data, " from ");
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_acl_info *entry;
 
-	if (cp) {
-		*cp = '\0';
-		return tomoyo_update_domain_initializer_entry(cp + 6, data,
-							      is_not,
-							      is_delete);
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		return error;
+	list_for_each_entry_rcu(entry, &domain->acl_info_list, list) {
+		if (!check_duplicate(entry, new_entry))
+			continue;
+		if (merge_duplicate)
+			entry->is_deleted = merge_duplicate(entry, new_entry,
+							    is_delete);
+		else
+			entry->is_deleted = is_delete;
+		error = 0;
+		break;
 	}
-	return tomoyo_update_domain_initializer_entry(NULL, data, is_not,
-						      is_delete);
+	if (error && !is_delete) {
+		entry = tomoyo_commit_ok(new_entry, size);
+		if (entry) {
+			list_add_tail_rcu(&entry->list, &domain->acl_info_list);
+			error = 0;
+		}
+	}
+	mutex_unlock(&tomoyo_policy_lock);
+	return error;
+}
+
+void tomoyo_check_acl(struct tomoyo_request_info *r,
+		      bool (*check_entry) (struct tomoyo_request_info *,
+					   const struct tomoyo_acl_info *))
+{
+	const struct tomoyo_domain_info *domain = r->domain;
+	struct tomoyo_acl_info *ptr;
+
+	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
+		if (ptr->is_deleted || ptr->type != r->param_type)
+			continue;
+		if (check_entry(r, ptr)) {
+			r->granted = true;
+			return;
+		}
+	}
+	r->granted = false;
+}
+
+/* The list for "struct tomoyo_domain_info". */
+LIST_HEAD(tomoyo_domain_list);
+
+struct list_head tomoyo_policy_list[TOMOYO_MAX_POLICY];
+struct list_head tomoyo_group_list[TOMOYO_MAX_GROUP];
+
+/**
+ * tomoyo_last_word - Get last component of a domainname.
+ *
+ * @domainname: Domainname to check.
+ *
+ * Returns the last word of @domainname.
+ */
+static const char *tomoyo_last_word(const char *name)
+{
+        const char *cp = strrchr(name, ' ');
+        if (cp)
+                return cp + 1;
+        return name;
+}
+
+static bool tomoyo_same_transition_control(const struct tomoyo_acl_head *a,
+					   const struct tomoyo_acl_head *b)
+{
+	const struct tomoyo_transition_control *p1 = container_of(a,
+								  typeof(*p1),
+								  head);
+	const struct tomoyo_transition_control *p2 = container_of(b,
+								  typeof(*p2),
+								  head);
+	return p1->type == p2->type && p1->is_last_name == p2->is_last_name
+		&& p1->domainname == p2->domainname
+		&& p1->program == p2->program;
 }
 
 /**
- * tomoyo_is_domain_initializer - Check whether the given program causes domainname reinitialization.
+ * tomoyo_update_transition_control_entry - Update "struct tomoyo_transition_control" list.
  *
- * @domainname: The name of domain.
- * @program:    The name of program.
- * @last_name:  The last component of @domainname.
- *
- * Returns true if executing @program reinitializes domain transition,
- * false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static bool tomoyo_is_domain_initializer(const struct tomoyo_path_info *
-					 domainname,
-					 const struct tomoyo_path_info *program,
-					 const struct tomoyo_path_info *
-					 last_name)
-{
-	struct tomoyo_domain_initializer_entry *ptr;
-	bool flag = false;
-
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list, list) {
-		if (ptr->is_deleted)
-			continue;
-		if (ptr->domainname) {
-			if (!ptr->is_last_name) {
-				if (ptr->domainname != domainname)
-					continue;
-			} else {
-				if (tomoyo_pathcmp(ptr->domainname, last_name))
-					continue;
-			}
-		}
-		if (tomoyo_pathcmp(ptr->program, program))
-			continue;
-		if (ptr->is_not) {
-			flag = false;
-			break;
-		}
-		flag = true;
-	}
-	return flag;
-}
-
-/*
- * tomoyo_domain_keeper_list is used for holding list of domainnames which
- * suppresses domain transition. Normally, a domainname is monotonically
- * getting longer. But sometimes, we want to suppress domain transition.
- * It would be convenient for us that programs executed from a login session
- * belong to the same domain. Thus, TOMOYO provides a way to suppress domain
- * transition.
- *
- * An entry is added by
- *
- * # echo 'keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete keep_domain <kernel> /usr/sbin/sshd /bin/bash' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^keep_domain /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, any process which belongs to
- * "<kernel> /usr/sbin/sshd /bin/bash" domain will remain in that domain,
- * unless explicitly specified by "initialize_domain" or "no_keep_domain".
- *
- * You may specify a program using "from" keyword.
- * "keep_domain /bin/pwd from <kernel> /usr/sbin/sshd /bin/bash"
- * will cause "/bin/pwd" executed from "<kernel> /usr/sbin/sshd /bin/bash"
- * domain to remain in "<kernel> /usr/sbin/sshd /bin/bash" domain.
- *
- * You may add "no_" prefix to "keep_domain".
- * "keep_domain <kernel> /usr/sbin/sshd /bin/bash" and
- * "no_keep_domain /usr/bin/passwd from <kernel> /usr/sbin/sshd /bin/bash" will
- * cause "/usr/bin/passwd" to belong to
- * "<kernel> /usr/sbin/sshd /bin/bash /usr/bin/passwd" domain, unless
- * explicitly specified by "initialize_domain".
- */
-LIST_HEAD(tomoyo_domain_keeper_list);
-
-/**
- * tomoyo_update_domain_keeper_entry - Update "struct tomoyo_domain_keeper_entry" list.
- *
- * @domainname: The name of domain.
- * @program:    The name of program. May be NULL.
- * @is_not:     True if it is "no_keep_domain" entry.
+ * @domainname: The name of domain. Maybe NULL.
+ * @program:    The name of program. Maybe NULL.
+ * @type:       Type of transition.
  * @is_delete:  True if it is a delete request.
  *
  * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_domain_keeper_entry(const char *domainname,
-					     const char *program,
-					     const bool is_not,
-					     const bool is_delete)
+static int tomoyo_update_transition_control_entry(const char *domainname,
+						  const char *program,
+						  const u8 type,
+						  const bool is_delete)
 {
-	struct tomoyo_domain_keeper_entry *ptr;
-	struct tomoyo_domain_keeper_entry e = { .is_not = is_not };
+	struct tomoyo_transition_control e = { .type = type };
 	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (!tomoyo_is_domain_def(domainname) &&
-	    tomoyo_is_correct_path(domainname, 1, -1, -1))
-		e.is_last_name = true;
-	else if (!tomoyo_is_correct_domain(domainname))
-		return -EINVAL;
 	if (program) {
-		if (!tomoyo_is_correct_path(program, 1, -1, -1))
+		if (!tomoyo_correct_path(program))
 			return -EINVAL;
 		e.program = tomoyo_get_name(program);
 		if (!e.program)
 			goto out;
 	}
-	e.domainname = tomoyo_get_name(domainname);
-	if (!e.domainname)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-		if (!tomoyo_is_same_domain_keeper_entry(ptr, &e))
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_domain_keeper_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_domain_keeper_list);
-			error = 0;
+	if (domainname) {
+		if (!tomoyo_correct_domain(domainname)) {
+			if (!tomoyo_correct_path(domainname))
+				goto out;
+			e.is_last_name = true;
 		}
+		e.domainname = tomoyo_get_name(domainname);
+		if (!e.domainname)
+			goto out;
 	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list
+				     [TOMOYO_ID_TRANSITION_CONTROL],
+				     tomoyo_same_transition_control);
  out:
 	tomoyo_put_name(e.domainname);
 	tomoyo_put_name(e.program);
@@ -385,219 +207,133 @@
 }
 
 /**
- * tomoyo_write_domain_keeper_policy - Write "struct tomoyo_domain_keeper_entry" list.
+ * tomoyo_write_transition_control - Write "struct tomoyo_transition_control" list.
  *
  * @data:      String to parse.
- * @is_not:    True if it is "no_keep_domain" entry.
  * @is_delete: True if it is a delete request.
+ * @type:      Type of this entry.
  *
- * Caller holds tomoyo_read_lock().
+ * Returns 0 on success, negative value otherwise.
  */
-int tomoyo_write_domain_keeper_policy(char *data, const bool is_not,
-				      const bool is_delete)
+int tomoyo_write_transition_control(char *data, const bool is_delete,
+				    const u8 type)
 {
-	char *cp = strstr(data, " from ");
-
-	if (cp) {
-		*cp = '\0';
-		return tomoyo_update_domain_keeper_entry(cp + 6, data, is_not,
-							 is_delete);
+	char *domainname = strstr(data, " from ");
+	if (domainname) {
+		*domainname = '\0';
+		domainname += 6;
+	} else if (type == TOMOYO_TRANSITION_CONTROL_NO_KEEP ||
+		   type == TOMOYO_TRANSITION_CONTROL_KEEP) {
+		domainname = data;
+		data = NULL;
 	}
-	return tomoyo_update_domain_keeper_entry(data, NULL, is_not, is_delete);
+	return tomoyo_update_transition_control_entry(domainname, data, type,
+						      is_delete);
 }
 
 /**
- * tomoyo_read_domain_keeper_policy - Read "struct tomoyo_domain_keeper_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_domain_keeper_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_domain_keeper_list) {
-		struct tomoyo_domain_keeper_entry *ptr;
-		const char *no;
-		const char *from = "";
-		const char *program = "";
-
-		ptr = list_entry(pos, struct tomoyo_domain_keeper_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		no = ptr->is_not ? "no_" : "";
-		if (ptr->program) {
-			from = " from ";
-			program = ptr->program->name;
-		}
-		done = tomoyo_io_printf(head,
-					"%s" TOMOYO_KEYWORD_KEEP_DOMAIN
-					"%s%s%s\n", no, program, from,
-					ptr->domainname->name);
-		if (!done)
-			break;
-	}
-	return done;
-}
-
-/**
- * tomoyo_is_domain_keeper - Check whether the given program causes domain transition suppression.
+ * tomoyo_transition_type - Get domain transition type.
  *
  * @domainname: The name of domain.
  * @program:    The name of program.
- * @last_name:  The last component of @domainname.
  *
- * Returns true if executing @program supresses domain transition,
- * false otherwise.
+ * Returns TOMOYO_TRANSITION_CONTROL_INITIALIZE if executing @program
+ * reinitializes domain transition, TOMOYO_TRANSITION_CONTROL_KEEP if executing
+ * @program suppresses domain transition, others otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_domain_keeper(const struct tomoyo_path_info *domainname,
-				    const struct tomoyo_path_info *program,
-				    const struct tomoyo_path_info *last_name)
+static u8 tomoyo_transition_type(const struct tomoyo_path_info *domainname,
+				 const struct tomoyo_path_info *program)
 {
-	struct tomoyo_domain_keeper_entry *ptr;
-	bool flag = false;
-
-	list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-		if (ptr->is_deleted)
-			continue;
-		if (!ptr->is_last_name) {
-			if (ptr->domainname != domainname)
+	const struct tomoyo_transition_control *ptr;
+	const char *last_name = tomoyo_last_word(domainname->name);
+	u8 type;
+	for (type = 0; type < TOMOYO_MAX_TRANSITION_TYPE; type++) {
+ next:
+		list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+					[TOMOYO_ID_TRANSITION_CONTROL],
+					head.list) {
+			if (ptr->head.is_deleted || ptr->type != type)
 				continue;
-		} else {
-			if (tomoyo_pathcmp(ptr->domainname, last_name))
+			if (ptr->domainname) {
+				if (!ptr->is_last_name) {
+					if (ptr->domainname != domainname)
+						continue;
+				} else {
+					/*
+					 * Use direct strcmp() since this is
+					 * unlikely used.
+					 */
+					if (strcmp(ptr->domainname->name,
+						   last_name))
+						continue;
+				}
+			}
+			if (ptr->program &&
+			    tomoyo_pathcmp(ptr->program, program))
 				continue;
+			if (type == TOMOYO_TRANSITION_CONTROL_NO_INITIALIZE) {
+				/*
+				 * Do not check for initialize_domain if
+				 * no_initialize_domain matched.
+				 */
+				type = TOMOYO_TRANSITION_CONTROL_NO_KEEP;
+				goto next;
+			}
+			goto done;
 		}
-		if (ptr->program && tomoyo_pathcmp(ptr->program, program))
-			continue;
-		if (ptr->is_not) {
-			flag = false;
-			break;
-		}
-		flag = true;
 	}
-	return flag;
+ done:
+	return type;
 }
 
-/*
- * tomoyo_alias_list is used for holding list of symlink's pathnames which are
- * allowed to be passed to an execve() request. Normally, the domainname which
- * the current process will belong to after execve() succeeds is calculated
- * using dereferenced pathnames. But some programs behave differently depending
- * on the name passed to argv[0]. For busybox, calculating domainname using
- * dereferenced pathnames will cause all programs in the busybox to belong to
- * the same domain. Thus, TOMOYO provides a way to allow use of symlink's
- * pathname for checking execve()'s permission and calculating domainname which
- * the current process will belong to after execve() succeeds.
- *
- * An entry is added by
- *
- * # echo 'alias /bin/busybox /bin/cat' > \
- *                            /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete alias /bin/busybox /bin/cat' > \
- *                            /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^alias /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if /bin/cat is a symlink to /bin/busybox and execution
- * of /bin/cat is requested, permission is checked for /bin/cat rather than
- * /bin/busybox and domainname which the current process will belong to after
- * execve() succeeds is calculated using /bin/cat rather than /bin/busybox .
- */
-LIST_HEAD(tomoyo_alias_list);
+static bool tomoyo_same_aggregator(const struct tomoyo_acl_head *a,
+				   const struct tomoyo_acl_head *b)
+{
+	const struct tomoyo_aggregator *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_aggregator *p2 = container_of(b, typeof(*p2), head);
+	return p1->original_name == p2->original_name &&
+		p1->aggregated_name == p2->aggregated_name;
+}
 
 /**
- * tomoyo_update_alias_entry - Update "struct tomoyo_alias_entry" list.
+ * tomoyo_update_aggregator_entry - Update "struct tomoyo_aggregator" list.
  *
- * @original_name: The original program's real name.
- * @aliased_name:  The symbolic program's symbolic link's name.
- * @is_delete:     True if it is a delete request.
+ * @original_name:   The original program's name.
+ * @aggregated_name: The program name to use.
+ * @is_delete:       True if it is a delete request.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_update_alias_entry(const char *original_name,
-				     const char *aliased_name,
-				     const bool is_delete)
+static int tomoyo_update_aggregator_entry(const char *original_name,
+					  const char *aggregated_name,
+					  const bool is_delete)
 {
-	struct tomoyo_alias_entry *ptr;
-	struct tomoyo_alias_entry e = { };
+	struct tomoyo_aggregator e = { };
 	int error = is_delete ? -ENOENT : -ENOMEM;
 
-	if (!tomoyo_is_correct_path(original_name, 1, -1, -1) ||
-	    !tomoyo_is_correct_path(aliased_name, 1, -1, -1))
-		return -EINVAL; /* No patterns allowed. */
+	if (!tomoyo_correct_path(original_name) ||
+	    !tomoyo_correct_path(aggregated_name))
+		return -EINVAL;
 	e.original_name = tomoyo_get_name(original_name);
-	e.aliased_name = tomoyo_get_name(aliased_name);
-	if (!e.original_name || !e.aliased_name)
+	e.aggregated_name = tomoyo_get_name(aggregated_name);
+	if (!e.original_name || !e.aggregated_name ||
+	    e.aggregated_name->is_patterned) /* No patterns allowed. */
 		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-		if (!tomoyo_is_same_alias_entry(ptr, &e))
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_alias_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &tomoyo_alias_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_AGGREGATOR],
+				     tomoyo_same_aggregator);
  out:
 	tomoyo_put_name(e.original_name);
-	tomoyo_put_name(e.aliased_name);
+	tomoyo_put_name(e.aggregated_name);
 	return error;
 }
 
 /**
- * tomoyo_read_alias_policy - Read "struct tomoyo_alias_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_alias_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_alias_list) {
-		struct tomoyo_alias_entry *ptr;
-
-		ptr = list_entry(pos, struct tomoyo_alias_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALIAS "%s %s\n",
-					ptr->original_name->name,
-					ptr->aliased_name->name);
-		if (!done)
-			break;
-	}
-	return done;
-}
-
-/**
- * tomoyo_write_alias_policy - Write "struct tomoyo_alias_entry" list.
+ * tomoyo_write_aggregator - Write "struct tomoyo_aggregator" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -606,18 +342,18 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_alias_policy(char *data, const bool is_delete)
+int tomoyo_write_aggregator(char *data, const bool is_delete)
 {
 	char *cp = strchr(data, ' ');
 
 	if (!cp)
 		return -EINVAL;
 	*cp++ = '\0';
-	return tomoyo_update_alias_entry(data, cp, is_delete);
+	return tomoyo_update_aggregator_entry(data, cp, is_delete);
 }
 
 /**
- * tomoyo_find_or_assign_new_domain - Create a domain.
+ * tomoyo_assign_domain - Create a domain.
  *
  * @domainname: The name of domain.
  * @profile:    Profile number to assign if the domain was newly created.
@@ -626,16 +362,15 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-struct tomoyo_domain_info *tomoyo_find_or_assign_new_domain(const char *
-							    domainname,
-							    const u8 profile)
+struct tomoyo_domain_info *tomoyo_assign_domain(const char *domainname,
+						const u8 profile)
 {
 	struct tomoyo_domain_info *entry;
 	struct tomoyo_domain_info *domain = NULL;
 	const struct tomoyo_path_info *saved_domainname;
 	bool found = false;
 
-	if (!tomoyo_is_correct_domain(domainname))
+	if (!tomoyo_correct_domain(domainname))
 		return NULL;
 	saved_domainname = tomoyo_get_name(domainname);
 	if (!saved_domainname)
@@ -678,116 +413,118 @@
  */
 int tomoyo_find_next_domain(struct linux_binprm *bprm)
 {
-	/*
-	 * This function assumes that the size of buffer returned by
-	 * tomoyo_realpath() = TOMOYO_MAX_PATHNAME_LEN.
-	 */
-	struct tomoyo_page_buffer *tmp = kzalloc(sizeof(*tmp), GFP_NOFS);
+	struct tomoyo_request_info r;
+	char *tmp = kzalloc(TOMOYO_EXEC_TMPSIZE, GFP_NOFS);
 	struct tomoyo_domain_info *old_domain = tomoyo_domain();
 	struct tomoyo_domain_info *domain = NULL;
-	const char *old_domain_name = old_domain->domainname->name;
 	const char *original_name = bprm->filename;
-	char *new_domain_name = NULL;
-	char *real_program_name = NULL;
-	char *symlink_program_name = NULL;
-	const u8 mode = tomoyo_check_flags(old_domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	u8 mode;
+	bool is_enforce;
 	int retval = -ENOMEM;
-	struct tomoyo_path_info r; /* real name */
-	struct tomoyo_path_info s; /* symlink name */
-	struct tomoyo_path_info l; /* last name */
-	static bool initialized;
+	bool need_kfree = false;
+	struct tomoyo_path_info rn = { }; /* real name */
 
+	mode = tomoyo_init_request_info(&r, NULL, TOMOYO_MAC_FILE_EXECUTE);
+	is_enforce = (mode == TOMOYO_CONFIG_ENFORCING);
 	if (!tmp)
 		goto out;
 
-	if (!initialized) {
-		/*
-		 * Built-in initializers. This is needed because policies are
-		 * not loaded until starting /sbin/init.
-		 */
-		tomoyo_update_domain_initializer_entry(NULL, "/sbin/hotplug",
-						       false, false);
-		tomoyo_update_domain_initializer_entry(NULL, "/sbin/modprobe",
-						       false, false);
-		initialized = true;
+ retry:
+	if (need_kfree) {
+		kfree(rn.name);
+		need_kfree = false;
 	}
-
-	/* Get tomoyo_realpath of program. */
+	/* Get symlink's pathname of program. */
 	retval = -ENOENT;
-	/* I hope tomoyo_realpath() won't fail with -ENOMEM. */
-	real_program_name = tomoyo_realpath(original_name);
-	if (!real_program_name)
+	rn.name = tomoyo_realpath_nofollow(original_name);
+	if (!rn.name)
 		goto out;
-	/* Get tomoyo_realpath of symbolic link. */
-	symlink_program_name = tomoyo_realpath_nofollow(original_name);
-	if (!symlink_program_name)
-		goto out;
+	tomoyo_fill_path_info(&rn);
+	need_kfree = true;
 
-	r.name = real_program_name;
-	tomoyo_fill_path_info(&r);
-	s.name = symlink_program_name;
-	tomoyo_fill_path_info(&s);
-	l.name = tomoyo_get_last_name(old_domain);
-	tomoyo_fill_path_info(&l);
-
-	/* Check 'alias' directive. */
-	if (tomoyo_pathcmp(&r, &s)) {
-		struct tomoyo_alias_entry *ptr;
-		/* Is this program allowed to be called via symbolic links? */
-		list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-			if (ptr->is_deleted ||
-			    tomoyo_pathcmp(&r, ptr->original_name) ||
-			    tomoyo_pathcmp(&s, ptr->aliased_name))
+	/* Check 'aggregator' directive. */
+	{
+		struct tomoyo_aggregator *ptr;
+		list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+					[TOMOYO_ID_AGGREGATOR], head.list) {
+			if (ptr->head.is_deleted ||
+			    !tomoyo_path_matches_pattern(&rn,
+							 ptr->original_name))
 				continue;
-			memset(real_program_name, 0, TOMOYO_MAX_PATHNAME_LEN);
-			strncpy(real_program_name, ptr->aliased_name->name,
-				TOMOYO_MAX_PATHNAME_LEN - 1);
-			tomoyo_fill_path_info(&r);
+			kfree(rn.name);
+			need_kfree = false;
+			/* This is OK because it is read only. */
+			rn = *ptr->aggregated_name;
 			break;
 		}
 	}
 
 	/* Check execute permission. */
-	retval = tomoyo_check_exec_perm(old_domain, &r);
+	retval = tomoyo_path_permission(&r, TOMOYO_TYPE_EXECUTE, &rn);
+	if (retval == TOMOYO_RETRY_REQUEST)
+		goto retry;
 	if (retval < 0)
 		goto out;
+	/*
+	 * To be able to specify domainnames with wildcards, use the
+	 * pathname specified in the policy (which may contain
+	 * wildcard) rather than the pathname passed to execve()
+	 * (which never contains wildcard).
+	 */
+	if (r.param.path.matched_path) {
+		if (need_kfree)
+			kfree(rn.name);
+		need_kfree = false;
+		/* This is OK because it is read only. */
+		rn = *r.param.path.matched_path;
+	}
 
-	new_domain_name = tmp->buffer;
-	if (tomoyo_is_domain_initializer(old_domain->domainname, &r, &l)) {
+	/* Calculate domain to transit to. */
+	switch (tomoyo_transition_type(old_domain->domainname, &rn)) {
+	case TOMOYO_TRANSITION_CONTROL_INITIALIZE:
 		/* Transit to the child of tomoyo_kernel_domain domain. */
-		snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1,
-			 TOMOYO_ROOT_NAME " " "%s", real_program_name);
-	} else if (old_domain == &tomoyo_kernel_domain &&
-		   !tomoyo_policy_loaded) {
-		/*
-		 * Needn't to transit from kernel domain before starting
-		 * /sbin/init. But transit from kernel domain if executing
-		 * initializers because they might start before /sbin/init.
-		 */
-		domain = old_domain;
-	} else if (tomoyo_is_domain_keeper(old_domain->domainname, &r, &l)) {
+		snprintf(tmp, TOMOYO_EXEC_TMPSIZE - 1, TOMOYO_ROOT_NAME " "
+			 "%s", rn.name);
+		break;
+	case TOMOYO_TRANSITION_CONTROL_KEEP:
 		/* Keep current domain. */
 		domain = old_domain;
-	} else {
-		/* Normal domain transition. */
-		snprintf(new_domain_name, TOMOYO_MAX_PATHNAME_LEN + 1,
-			 "%s %s", old_domain_name, real_program_name);
+		break;
+	default:
+		if (old_domain == &tomoyo_kernel_domain &&
+		    !tomoyo_policy_loaded) {
+			/*
+			 * Needn't to transit from kernel domain before
+			 * starting /sbin/init. But transit from kernel domain
+			 * if executing initializers because they might start
+			 * before /sbin/init.
+			 */
+			domain = old_domain;
+		} else {
+			/* Normal domain transition. */
+			snprintf(tmp, TOMOYO_EXEC_TMPSIZE - 1, "%s %s",
+				 old_domain->domainname->name, rn.name);
+		}
+		break;
 	}
-	if (domain || strlen(new_domain_name) >= TOMOYO_MAX_PATHNAME_LEN)
+	if (domain || strlen(tmp) >= TOMOYO_EXEC_TMPSIZE - 10)
 		goto done;
-	domain = tomoyo_find_domain(new_domain_name);
+	domain = tomoyo_find_domain(tmp);
 	if (domain)
 		goto done;
-	if (is_enforce)
-		goto done;
-	domain = tomoyo_find_or_assign_new_domain(new_domain_name,
-						  old_domain->profile);
+	if (is_enforce) {
+		int error = tomoyo_supervisor(&r, "# wants to create domain\n"
+					      "%s\n", tmp);
+		if (error == TOMOYO_RETRY_REQUEST)
+			goto retry;
+		if (error < 0)
+			goto done;
+	}
+	domain = tomoyo_assign_domain(tmp, old_domain->profile);
  done:
 	if (domain)
 		goto out;
-	printk(KERN_WARNING "TOMOYO-ERROR: Domain '%s' not defined.\n",
-	       new_domain_name);
+	printk(KERN_WARNING "TOMOYO-ERROR: Domain '%s' not defined.\n", tmp);
 	if (is_enforce)
 		retval = -EPERM;
 	else
@@ -798,8 +535,8 @@
 	/* Update reference count on "struct tomoyo_domain_info". */
 	atomic_inc(&domain->users);
 	bprm->cred->security = domain;
-	kfree(real_program_name);
-	kfree(symlink_program_name);
+	if (need_kfree)
+		kfree(rn.name);
 	kfree(tmp);
 	return retval;
 }
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 1c6f823..9d32f18 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -1,48 +1,88 @@
 /*
  * security/tomoyo/file.c
  *
- * Implementation of the Domain-Based Mandatory Access Control.
+ * Pathname restriction functions.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include "common.h"
 #include <linux/slab.h>
 
-/* Keyword array for single path operations. */
-static const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION] = {
+/* Keyword array for operations with one pathname. */
+const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION] = {
 	[TOMOYO_TYPE_READ_WRITE] = "read/write",
 	[TOMOYO_TYPE_EXECUTE]    = "execute",
 	[TOMOYO_TYPE_READ]       = "read",
 	[TOMOYO_TYPE_WRITE]      = "write",
-	[TOMOYO_TYPE_CREATE]     = "create",
 	[TOMOYO_TYPE_UNLINK]     = "unlink",
-	[TOMOYO_TYPE_MKDIR]      = "mkdir",
 	[TOMOYO_TYPE_RMDIR]      = "rmdir",
-	[TOMOYO_TYPE_MKFIFO]     = "mkfifo",
-	[TOMOYO_TYPE_MKSOCK]     = "mksock",
-	[TOMOYO_TYPE_MKBLOCK]    = "mkblock",
-	[TOMOYO_TYPE_MKCHAR]     = "mkchar",
 	[TOMOYO_TYPE_TRUNCATE]   = "truncate",
 	[TOMOYO_TYPE_SYMLINK]    = "symlink",
 	[TOMOYO_TYPE_REWRITE]    = "rewrite",
+	[TOMOYO_TYPE_CHROOT]     = "chroot",
+	[TOMOYO_TYPE_UMOUNT]     = "unmount",
+};
+
+/* Keyword array for operations with one pathname and three numbers. */
+const char *tomoyo_mkdev_keyword[TOMOYO_MAX_MKDEV_OPERATION] = {
+	[TOMOYO_TYPE_MKBLOCK]    = "mkblock",
+	[TOMOYO_TYPE_MKCHAR]     = "mkchar",
+};
+
+/* Keyword array for operations with two pathnames. */
+const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION] = {
+	[TOMOYO_TYPE_LINK]       = "link",
+	[TOMOYO_TYPE_RENAME]     = "rename",
+	[TOMOYO_TYPE_PIVOT_ROOT] = "pivot_root",
+};
+
+/* Keyword array for operations with one pathname and one number. */
+const char *tomoyo_path_number_keyword[TOMOYO_MAX_PATH_NUMBER_OPERATION] = {
+	[TOMOYO_TYPE_CREATE]     = "create",
+	[TOMOYO_TYPE_MKDIR]      = "mkdir",
+	[TOMOYO_TYPE_MKFIFO]     = "mkfifo",
+	[TOMOYO_TYPE_MKSOCK]     = "mksock",
 	[TOMOYO_TYPE_IOCTL]      = "ioctl",
 	[TOMOYO_TYPE_CHMOD]      = "chmod",
 	[TOMOYO_TYPE_CHOWN]      = "chown",
 	[TOMOYO_TYPE_CHGRP]      = "chgrp",
-	[TOMOYO_TYPE_CHROOT]     = "chroot",
-	[TOMOYO_TYPE_MOUNT]      = "mount",
-	[TOMOYO_TYPE_UMOUNT]     = "unmount",
 };
 
-/* Keyword array for double path operations. */
-static const char *tomoyo_path2_keyword[TOMOYO_MAX_PATH2_OPERATION] = {
-	[TOMOYO_TYPE_LINK]    = "link",
-	[TOMOYO_TYPE_RENAME]  = "rename",
-	[TOMOYO_TYPE_PIVOT_ROOT] = "pivot_root",
+static const u8 tomoyo_p2mac[TOMOYO_MAX_PATH_OPERATION] = {
+	[TOMOYO_TYPE_READ_WRITE] = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_EXECUTE]    = TOMOYO_MAC_FILE_EXECUTE,
+	[TOMOYO_TYPE_READ]       = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_WRITE]      = TOMOYO_MAC_FILE_OPEN,
+	[TOMOYO_TYPE_UNLINK]     = TOMOYO_MAC_FILE_UNLINK,
+	[TOMOYO_TYPE_RMDIR]      = TOMOYO_MAC_FILE_RMDIR,
+	[TOMOYO_TYPE_TRUNCATE]   = TOMOYO_MAC_FILE_TRUNCATE,
+	[TOMOYO_TYPE_SYMLINK]    = TOMOYO_MAC_FILE_SYMLINK,
+	[TOMOYO_TYPE_REWRITE]    = TOMOYO_MAC_FILE_REWRITE,
+	[TOMOYO_TYPE_CHROOT]     = TOMOYO_MAC_FILE_CHROOT,
+	[TOMOYO_TYPE_UMOUNT]     = TOMOYO_MAC_FILE_UMOUNT,
+};
+
+static const u8 tomoyo_pnnn2mac[TOMOYO_MAX_MKDEV_OPERATION] = {
+	[TOMOYO_TYPE_MKBLOCK] = TOMOYO_MAC_FILE_MKBLOCK,
+	[TOMOYO_TYPE_MKCHAR]  = TOMOYO_MAC_FILE_MKCHAR,
+};
+
+static const u8 tomoyo_pp2mac[TOMOYO_MAX_PATH2_OPERATION] = {
+	[TOMOYO_TYPE_LINK]       = TOMOYO_MAC_FILE_LINK,
+	[TOMOYO_TYPE_RENAME]     = TOMOYO_MAC_FILE_RENAME,
+	[TOMOYO_TYPE_PIVOT_ROOT] = TOMOYO_MAC_FILE_PIVOT_ROOT,
+};
+
+static const u8 tomoyo_pn2mac[TOMOYO_MAX_PATH_NUMBER_OPERATION] = {
+	[TOMOYO_TYPE_CREATE] = TOMOYO_MAC_FILE_CREATE,
+	[TOMOYO_TYPE_MKDIR]  = TOMOYO_MAC_FILE_MKDIR,
+	[TOMOYO_TYPE_MKFIFO] = TOMOYO_MAC_FILE_MKFIFO,
+	[TOMOYO_TYPE_MKSOCK] = TOMOYO_MAC_FILE_MKSOCK,
+	[TOMOYO_TYPE_IOCTL]  = TOMOYO_MAC_FILE_IOCTL,
+	[TOMOYO_TYPE_CHMOD]  = TOMOYO_MAC_FILE_CHMOD,
+	[TOMOYO_TYPE_CHOWN]  = TOMOYO_MAC_FILE_CHOWN,
+	[TOMOYO_TYPE_CHGRP]  = TOMOYO_MAC_FILE_CHGRP,
 };
 
 void tomoyo_put_name_union(struct tomoyo_name_union *ptr)
@@ -50,56 +90,45 @@
 	if (!ptr)
 		return;
 	if (ptr->is_group)
-		tomoyo_put_path_group(ptr->group);
+		tomoyo_put_group(ptr->group);
 	else
 		tomoyo_put_name(ptr->filename);
 }
 
-bool tomoyo_compare_name_union(const struct tomoyo_path_info *name,
-			       const struct tomoyo_name_union *ptr)
+const struct tomoyo_path_info *
+tomoyo_compare_name_union(const struct tomoyo_path_info *name,
+			  const struct tomoyo_name_union *ptr)
 {
 	if (ptr->is_group)
-		return tomoyo_path_matches_group(name, ptr->group, 1);
-	return tomoyo_path_matches_pattern(name, ptr->filename);
+		return tomoyo_path_matches_group(name, ptr->group);
+	if (tomoyo_path_matches_pattern(name, ptr->filename))
+		return ptr->filename;
+	return NULL;
 }
 
-static bool tomoyo_compare_name_union_pattern(const struct tomoyo_path_info
-					      *name,
-					      const struct tomoyo_name_union
-					      *ptr, const bool may_use_pattern)
+void tomoyo_put_number_union(struct tomoyo_number_union *ptr)
+{
+	if (ptr && ptr->is_group)
+		tomoyo_put_group(ptr->group);
+}
+
+bool tomoyo_compare_number_union(const unsigned long value,
+				 const struct tomoyo_number_union *ptr)
 {
 	if (ptr->is_group)
-		return tomoyo_path_matches_group(name, ptr->group,
-						 may_use_pattern);
-	if (may_use_pattern || !ptr->filename->is_patterned)
-		return tomoyo_path_matches_pattern(name, ptr->filename);
-	return false;
+		return tomoyo_number_matches_group(value, value, ptr->group);
+	return value >= ptr->values[0] && value <= ptr->values[1];
 }
 
-/**
- * tomoyo_path2keyword - Get the name of single path operation.
- *
- * @operation: Type of operation.
- *
- * Returns the name of single path operation.
- */
-const char *tomoyo_path2keyword(const u8 operation)
+static void tomoyo_add_slash(struct tomoyo_path_info *buf)
 {
-	return (operation < TOMOYO_MAX_PATH_OPERATION)
-		? tomoyo_path_keyword[operation] : NULL;
-}
-
-/**
- * tomoyo_path22keyword - Get the name of double path operation.
- *
- * @operation: Type of operation.
- *
- * Returns the name of double path operation.
- */
-const char *tomoyo_path22keyword(const u8 operation)
-{
-	return (operation < TOMOYO_MAX_PATH2_OPERATION)
-		? tomoyo_path2_keyword[operation] : NULL;
+	if (buf->is_dir)
+		return;
+	/*
+	 * This is OK because tomoyo_encode() reserves space for appending "/".
+	 */
+	strcat((char *) buf->name, "/");
+	tomoyo_fill_path_info(buf);
 }
 
 /**
@@ -121,69 +150,134 @@
 }
 
 /**
- * tomoyo_get_path - Get realpath.
+ * tomoyo_get_realpath - Get realpath.
  *
+ * @buf:  Pointer to "struct tomoyo_path_info".
  * @path: Pointer to "struct path".
  *
- * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
+ * Returns true on success, false otherwise.
  */
-static struct tomoyo_path_info *tomoyo_get_path(struct path *path)
+static bool tomoyo_get_realpath(struct tomoyo_path_info *buf, struct path *path)
 {
-	int error;
-	struct tomoyo_path_info_with_data *buf = kzalloc(sizeof(*buf),
-							 GFP_NOFS);
-
-	if (!buf)
-		return NULL;
-	/* Reserve one byte for appending "/". */
-	error = tomoyo_realpath_from_path2(path, buf->body,
-					   sizeof(buf->body) - 2);
-	if (!error) {
-		buf->head.name = buf->body;
-		tomoyo_fill_path_info(&buf->head);
-		return &buf->head;
+	buf->name = tomoyo_realpath_from_path(path);
+	if (buf->name) {
+		tomoyo_fill_path_info(buf);
+		return true;
 	}
-	kfree(buf);
-	return NULL;
+        return false;
 }
 
-static int tomoyo_update_path2_acl(const u8 type, const char *filename1,
-				   const char *filename2,
-				   struct tomoyo_domain_info *const domain,
-				   const bool is_delete);
-static int tomoyo_update_path_acl(const u8 type, const char *filename,
-				  struct tomoyo_domain_info *const domain,
-				  const bool is_delete);
-
-/*
- * tomoyo_globally_readable_list is used for holding list of pathnames which
- * are by default allowed to be open()ed for reading by any process.
+/**
+ * tomoyo_audit_path_log - Audit path request log.
  *
- * An entry is added by
+ * @r: Pointer to "struct tomoyo_request_info".
  *
- * # echo 'allow_read /lib/libc-2.5.so' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete allow_read /lib/libc-2.5.so' > \
- *                               /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^allow_read /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, any process is allowed to
- * open("/lib/libc-2.5.so", O_RDONLY).
- * One exception is, if the domain which current process belongs to is marked
- * as "ignore_global_allow_read", current process can't do so unless explicitly
- * given "allow_read /lib/libc-2.5.so" to the domain which current process
- * belongs to.
+ * Returns 0 on success, negative value otherwise.
  */
-LIST_HEAD(tomoyo_globally_readable_list);
+static int tomoyo_audit_path_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_path_keyword[r->param.path.operation];
+	const struct tomoyo_path_info *filename = r->param.path.filename;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s", operation, filename->name);
+	return tomoyo_supervisor(r, "allow_%s %s\n", operation,
+				 tomoyo_pattern(filename));
+}
 
 /**
- * tomoyo_update_globally_readable_entry - Update "struct tomoyo_globally_readable_file_entry" list.
+ * tomoyo_audit_path2_log - Audit path/path request log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_path2_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_path2_keyword[r->param.path2.operation];
+	const struct tomoyo_path_info *filename1 = r->param.path2.filename1;
+	const struct tomoyo_path_info *filename2 = r->param.path2.filename2;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s %s", operation, filename1->name,
+			filename2->name);
+	return tomoyo_supervisor(r, "allow_%s %s %s\n", operation,
+				 tomoyo_pattern(filename1),
+				 tomoyo_pattern(filename2));
+}
+
+/**
+ * tomoyo_audit_mkdev_log - Audit path/number/number/number request log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_mkdev_log(struct tomoyo_request_info *r)
+{
+	const char *operation = tomoyo_mkdev_keyword[r->param.mkdev.operation];
+	const struct tomoyo_path_info *filename = r->param.mkdev.filename;
+	const unsigned int major = r->param.mkdev.major;
+	const unsigned int minor = r->param.mkdev.minor;
+	const unsigned int mode = r->param.mkdev.mode;
+	if (r->granted)
+		return 0;
+	tomoyo_warn_log(r, "%s %s 0%o %u %u", operation, filename->name, mode,
+			major, minor);
+	return tomoyo_supervisor(r, "allow_%s %s 0%o %u %u\n", operation,
+				 tomoyo_pattern(filename), mode, major, minor);
+}
+
+/**
+ * tomoyo_audit_path_number_log - Audit path/number request log.
+ *
+ * @r:     Pointer to "struct tomoyo_request_info".
+ * @error: Error code.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_path_number_log(struct tomoyo_request_info *r)
+{
+	const u8 type = r->param.path_number.operation;
+	u8 radix;
+	const struct tomoyo_path_info *filename = r->param.path_number.filename;
+	const char *operation = tomoyo_path_number_keyword[type];
+	char buffer[64];
+	if (r->granted)
+		return 0;
+	switch (type) {
+	case TOMOYO_TYPE_CREATE:
+	case TOMOYO_TYPE_MKDIR:
+	case TOMOYO_TYPE_MKFIFO:
+	case TOMOYO_TYPE_MKSOCK:
+	case TOMOYO_TYPE_CHMOD:
+		radix = TOMOYO_VALUE_TYPE_OCTAL;
+		break;
+	case TOMOYO_TYPE_IOCTL:
+		radix = TOMOYO_VALUE_TYPE_HEXADECIMAL;
+		break;
+	default:
+		radix = TOMOYO_VALUE_TYPE_DECIMAL;
+		break;
+	}
+	tomoyo_print_ulong(buffer, sizeof(buffer), r->param.path_number.number,
+			   radix);
+	tomoyo_warn_log(r, "%s %s %s", operation, filename->name, buffer);
+	return tomoyo_supervisor(r, "allow_%s %s %s\n", operation,
+				 tomoyo_pattern(filename), buffer);
+}
+
+static bool tomoyo_same_globally_readable(const struct tomoyo_acl_head *a,
+					  const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_readable_file,
+			    head)->filename ==
+		container_of(b, struct tomoyo_readable_file,
+			     head)->filename;
+}
+
+/**
+ * tomoyo_update_globally_readable_entry - Update "struct tomoyo_readable_file" list.
  *
  * @filename:  Filename unconditionally permitted to open() for reading.
  * @is_delete: True if it is a delete request.
@@ -195,41 +289,24 @@
 static int tomoyo_update_globally_readable_entry(const char *filename,
 						 const bool is_delete)
 {
-	struct tomoyo_globally_readable_file_entry *ptr;
-	struct tomoyo_globally_readable_file_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_readable_file e = { };
+	int error;
 
-	if (!tomoyo_is_correct_path(filename, 1, 0, -1))
+	if (!tomoyo_correct_word(filename))
 		return -EINVAL;
 	e.filename = tomoyo_get_name(filename);
 	if (!e.filename)
 		return -ENOMEM;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list, list) {
-		if (ptr->filename != e.filename)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_globally_readable_file_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_globally_readable_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list
+				     [TOMOYO_ID_GLOBALLY_READABLE],
+				     tomoyo_same_globally_readable);
 	tomoyo_put_name(e.filename);
 	return error;
 }
 
 /**
- * tomoyo_is_globally_readable_file - Check if the file is unconditionnaly permitted to be open()ed for reading.
+ * tomoyo_globally_readable_file - Check if the file is unconditionnaly permitted to be open()ed for reading.
  *
  * @filename: The filename to check.
  *
@@ -237,14 +314,15 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_globally_readable_file(const struct tomoyo_path_info *
+static bool tomoyo_globally_readable_file(const struct tomoyo_path_info *
 					     filename)
 {
-	struct tomoyo_globally_readable_file_entry *ptr;
+	struct tomoyo_readable_file *ptr;
 	bool found = false;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list, list) {
-		if (!ptr->is_deleted &&
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list
+				[TOMOYO_ID_GLOBALLY_READABLE], head.list) {
+		if (!ptr->head.is_deleted &&
 		    tomoyo_path_matches_pattern(filename, ptr->filename)) {
 			found = true;
 			break;
@@ -254,7 +332,7 @@
 }
 
 /**
- * tomoyo_write_globally_readable_policy - Write "struct tomoyo_globally_readable_file_entry" list.
+ * tomoyo_write_globally_readable - Write "struct tomoyo_readable_file" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -263,74 +341,20 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_globally_readable_policy(char *data, const bool is_delete)
+int tomoyo_write_globally_readable(char *data, const bool is_delete)
 {
 	return tomoyo_update_globally_readable_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_globally_readable_policy - Read "struct tomoyo_globally_readable_file_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_globally_readable_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_same_pattern(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2,
-			     &tomoyo_globally_readable_list) {
-		struct tomoyo_globally_readable_file_entry *ptr;
-		ptr = list_entry(pos,
-				 struct tomoyo_globally_readable_file_entry,
-				 list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_ALLOW_READ "%s\n",
-					ptr->filename->name);
-		if (!done)
-			break;
-	}
-	return done;
+	return container_of(a, struct tomoyo_no_pattern, head)->pattern ==
+		container_of(b, struct tomoyo_no_pattern, head)->pattern;
 }
 
-/* tomoyo_pattern_list is used for holding list of pathnames which are used for
- * converting pathnames to pathname patterns during learning mode.
- *
- * An entry is added by
- *
- * # echo 'file_pattern /proc/\$/mounts' > \
- *                             /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete file_pattern /proc/\$/mounts' > \
- *                             /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^file_pattern /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if a process which belongs to a domain which is in
- * learning mode requested open("/proc/1/mounts", O_RDONLY),
- * "allow_read /proc/\$/mounts" is automatically added to the domain which that
- * process belongs to.
- *
- * It is not a desirable behavior that we have to use /proc/\$/ instead of
- * /proc/self/ when current process needs to access only current process's
- * information. As of now, LSM version of TOMOYO is using __d_path() for
- * calculating pathname. Non LSM version of TOMOYO is using its own function
- * which pretends as if /proc/self/ is not a symlink; so that we can forbid
- * current process from accessing other process's information.
- */
-LIST_HEAD(tomoyo_pattern_list);
-
 /**
- * tomoyo_update_file_pattern_entry - Update "struct tomoyo_pattern_entry" list.
+ * tomoyo_update_file_pattern_entry - Update "struct tomoyo_no_pattern" list.
  *
  * @pattern:   Pathname pattern.
  * @is_delete: True if it is a delete request.
@@ -342,39 +366,23 @@
 static int tomoyo_update_file_pattern_entry(const char *pattern,
 					    const bool is_delete)
 {
-	struct tomoyo_pattern_entry *ptr;
-	struct tomoyo_pattern_entry e = { .pattern = tomoyo_get_name(pattern) };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_no_pattern e = { };
+	int error;
 
+	if (!tomoyo_correct_word(pattern))
+		return -EINVAL;
+	e.pattern = tomoyo_get_name(pattern);
 	if (!e.pattern)
-		return error;
-	if (!e.pattern->is_patterned)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-		if (e.pattern != ptr->pattern)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_pattern_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &tomoyo_pattern_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+		return -ENOMEM;
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_PATTERN],
+				     tomoyo_same_pattern);
 	tomoyo_put_name(e.pattern);
 	return error;
 }
 
 /**
- * tomoyo_get_file_pattern - Get patterned pathname.
+ * tomoyo_pattern - Get patterned pathname.
  *
  * @filename: The filename to find patterned pathname.
  *
@@ -382,14 +390,14 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static const struct tomoyo_path_info *
-tomoyo_get_file_pattern(const struct tomoyo_path_info *filename)
+const char *tomoyo_pattern(const struct tomoyo_path_info *filename)
 {
-	struct tomoyo_pattern_entry *ptr;
+	struct tomoyo_no_pattern *ptr;
 	const struct tomoyo_path_info *pattern = NULL;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-		if (ptr->is_deleted)
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_PATTERN],
+				head.list) {
+		if (ptr->head.is_deleted)
 			continue;
 		if (!tomoyo_path_matches_pattern(filename, ptr->pattern))
 			continue;
@@ -403,11 +411,11 @@
 	}
 	if (pattern)
 		filename = pattern;
-	return filename;
+	return filename->name;
 }
 
 /**
- * tomoyo_write_pattern_policy - Write "struct tomoyo_pattern_entry" list.
+ * tomoyo_write_pattern - Write "struct tomoyo_no_pattern" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -416,71 +424,21 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_pattern_policy(char *data, const bool is_delete)
+int tomoyo_write_pattern(char *data, const bool is_delete)
 {
 	return tomoyo_update_file_pattern_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_file_pattern - Read "struct tomoyo_pattern_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_file_pattern(struct tomoyo_io_buffer *head)
+static bool tomoyo_same_no_rewrite(const struct tomoyo_acl_head *a,
+				   const struct tomoyo_acl_head *b)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_pattern_list) {
-		struct tomoyo_pattern_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_pattern_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_FILE_PATTERN
-					"%s\n", ptr->pattern->name);
-		if (!done)
-			break;
-	}
-	return done;
+	return container_of(a, struct tomoyo_no_rewrite, head)->pattern
+		== container_of(b, struct tomoyo_no_rewrite, head)
+		->pattern;
 }
 
-/*
- * tomoyo_no_rewrite_list is used for holding list of pathnames which are by
- * default forbidden to modify already written content of a file.
- *
- * An entry is added by
- *
- * # echo 'deny_rewrite /var/log/messages' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and is deleted by
- *
- * # echo 'delete deny_rewrite /var/log/messages' > \
- *                              /sys/kernel/security/tomoyo/exception_policy
- *
- * and all entries are retrieved by
- *
- * # grep ^deny_rewrite /sys/kernel/security/tomoyo/exception_policy
- *
- * In the example above, if a process requested to rewrite /var/log/messages ,
- * the process can't rewrite unless the domain which that process belongs to
- * has "allow_rewrite /var/log/messages" entry.
- *
- * It is not a desirable behavior that we have to add "\040(deleted)" suffix
- * when we want to allow rewriting already unlink()ed file. As of now,
- * LSM version of TOMOYO is using __d_path() for calculating pathname.
- * Non LSM version of TOMOYO is using its own function which doesn't append
- * " (deleted)" suffix if the file is already unlink()ed; so that we don't
- * need to worry whether the file is already unlink()ed or not.
- */
-LIST_HEAD(tomoyo_no_rewrite_list);
-
 /**
- * tomoyo_update_no_rewrite_entry - Update "struct tomoyo_no_rewrite_entry" list.
+ * tomoyo_update_no_rewrite_entry - Update "struct tomoyo_no_rewrite" list.
  *
  * @pattern:   Pathname pattern that are not rewritable by default.
  * @is_delete: True if it is a delete request.
@@ -492,41 +450,23 @@
 static int tomoyo_update_no_rewrite_entry(const char *pattern,
 					  const bool is_delete)
 {
-	struct tomoyo_no_rewrite_entry *ptr;
-	struct tomoyo_no_rewrite_entry e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
+	struct tomoyo_no_rewrite e = { };
+	int error;
 
-	if (!tomoyo_is_correct_path(pattern, 0, 0, 0))
+	if (!tomoyo_correct_word(pattern))
 		return -EINVAL;
 	e.pattern = tomoyo_get_name(pattern);
 	if (!e.pattern)
-		return error;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-		if (ptr->pattern != e.pattern)
-			continue;
-		ptr->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_no_rewrite_entry *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list,
-					  &tomoyo_no_rewrite_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+		return -ENOMEM;
+	error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+				     &tomoyo_policy_list[TOMOYO_ID_NO_REWRITE],
+				     tomoyo_same_no_rewrite);
 	tomoyo_put_name(e.pattern);
 	return error;
 }
 
 /**
- * tomoyo_is_no_rewrite_file - Check if the given pathname is not permitted to be rewrited.
+ * tomoyo_no_rewrite_file - Check if the given pathname is not permitted to be rewrited.
  *
  * @filename: Filename to check.
  *
@@ -535,13 +475,14 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-static bool tomoyo_is_no_rewrite_file(const struct tomoyo_path_info *filename)
+static bool tomoyo_no_rewrite_file(const struct tomoyo_path_info *filename)
 {
-	struct tomoyo_no_rewrite_entry *ptr;
+	struct tomoyo_no_rewrite *ptr;
 	bool found = false;
 
-	list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-		if (ptr->is_deleted)
+	list_for_each_entry_rcu(ptr, &tomoyo_policy_list[TOMOYO_ID_NO_REWRITE],
+				head.list) {
+		if (ptr->head.is_deleted)
 			continue;
 		if (!tomoyo_path_matches_pattern(filename, ptr->pattern))
 			continue;
@@ -552,7 +493,7 @@
 }
 
 /**
- * tomoyo_write_no_rewrite_policy - Write "struct tomoyo_no_rewrite_entry" list.
+ * tomoyo_write_no_rewrite - Write "struct tomoyo_no_rewrite" list.
  *
  * @data:      String to parse.
  * @is_delete: True if it is a delete request.
@@ -561,256 +502,96 @@
  *
  * Caller holds tomoyo_read_lock().
  */
-int tomoyo_write_no_rewrite_policy(char *data, const bool is_delete)
+int tomoyo_write_no_rewrite(char *data, const bool is_delete)
 {
 	return tomoyo_update_no_rewrite_entry(data, is_delete);
 }
 
-/**
- * tomoyo_read_no_rewrite_policy - Read "struct tomoyo_no_rewrite_entry" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_no_rewrite_policy(struct tomoyo_io_buffer *head)
+static bool tomoyo_check_path_acl(struct tomoyo_request_info *r,
+				  const struct tomoyo_acl_info *ptr)
 {
-	struct list_head *pos;
-	bool done = true;
-
-	list_for_each_cookie(pos, head->read_var2, &tomoyo_no_rewrite_list) {
-		struct tomoyo_no_rewrite_entry *ptr;
-		ptr = list_entry(pos, struct tomoyo_no_rewrite_entry, list);
-		if (ptr->is_deleted)
-			continue;
-		done = tomoyo_io_printf(head, TOMOYO_KEYWORD_DENY_REWRITE
-					"%s\n", ptr->pattern->name);
-		if (!done)
-			break;
+	const struct tomoyo_path_acl *acl = container_of(ptr, typeof(*acl),
+							 head);
+	if (acl->perm & (1 << r->param.path.operation)) {
+		r->param.path.matched_path =
+			tomoyo_compare_name_union(r->param.path.filename,
+						  &acl->name);
+		return r->param.path.matched_path != NULL;
 	}
-	return done;
+	return false;
 }
 
-/**
- * tomoyo_update_file_acl - Update file's read/write/execute ACL.
- *
- * @filename:  Filename.
- * @perm:      Permission (between 1 to 7).
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * This is legacy support interface for older policy syntax.
- * Current policy syntax uses "allow_read/write" instead of "6",
- * "allow_read" instead of "4", "allow_write" instead of "2",
- * "allow_execute" instead of "1".
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_update_file_acl(const char *filename, u8 perm,
-				  struct tomoyo_domain_info * const domain,
+static bool tomoyo_check_path_number_acl(struct tomoyo_request_info *r,
+					 const struct tomoyo_acl_info *ptr)
+{
+	const struct tomoyo_path_number_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.path_number.operation)) &&
+		tomoyo_compare_number_union(r->param.path_number.number,
+					    &acl->number) &&
+		tomoyo_compare_name_union(r->param.path_number.filename,
+					  &acl->name);
+}
+
+static bool tomoyo_check_path2_acl(struct tomoyo_request_info *r,
+				   const struct tomoyo_acl_info *ptr)
+{
+	const struct tomoyo_path2_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.path2.operation)) &&
+		tomoyo_compare_name_union(r->param.path2.filename1, &acl->name1)
+		&& tomoyo_compare_name_union(r->param.path2.filename2,
+					     &acl->name2);
+}
+
+static bool tomoyo_check_mkdev_acl(struct tomoyo_request_info *r,
+				const struct tomoyo_acl_info *ptr)
+{
+	const struct tomoyo_mkdev_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return (acl->perm & (1 << r->param.mkdev.operation)) &&
+		tomoyo_compare_number_union(r->param.mkdev.mode,
+					    &acl->mode) &&
+		tomoyo_compare_number_union(r->param.mkdev.major,
+					    &acl->major) &&
+		tomoyo_compare_number_union(r->param.mkdev.minor,
+					    &acl->minor) &&
+		tomoyo_compare_name_union(r->param.mkdev.filename,
+					  &acl->name);
+}
+
+static bool tomoyo_same_path_acl(const struct tomoyo_acl_info *a,
+				 const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_path_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_path_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head) &&
+		tomoyo_same_name_union(&p1->name, &p2->name);
+}
+
+static bool tomoyo_merge_path_acl(struct tomoyo_acl_info *a,
+				  struct tomoyo_acl_info *b,
 				  const bool is_delete)
 {
-	if (perm > 7 || !perm) {
-		printk(KERN_DEBUG "%s: Invalid permission '%d %s'\n",
-		       __func__, perm, filename);
-		return -EINVAL;
+	u16 * const a_perm = &container_of(a, struct tomoyo_path_acl, head)
+		->perm;
+	u16 perm = *a_perm;
+	const u16 b_perm = container_of(b, struct tomoyo_path_acl, head)->perm;
+	if (is_delete) {
+		perm &= ~b_perm;
+		if ((perm & TOMOYO_RW_MASK) != TOMOYO_RW_MASK)
+			perm &= ~(1 << TOMOYO_TYPE_READ_WRITE);
+		else if (!(perm & (1 << TOMOYO_TYPE_READ_WRITE)))
+			perm &= ~TOMOYO_RW_MASK;
+	} else {
+		perm |= b_perm;
+		if ((perm & TOMOYO_RW_MASK) == TOMOYO_RW_MASK)
+			perm |= (1 << TOMOYO_TYPE_READ_WRITE);
+		else if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
+			perm |= TOMOYO_RW_MASK;
 	}
-	if (filename[0] != '@' && tomoyo_strendswith(filename, "/"))
-		/*
-		 * Only 'allow_mkdir' and 'allow_rmdir' are valid for
-		 * directory permissions.
-		 */
-		return 0;
-	if (perm & 4)
-		tomoyo_update_path_acl(TOMOYO_TYPE_READ, filename, domain,
-				       is_delete);
-	if (perm & 2)
-		tomoyo_update_path_acl(TOMOYO_TYPE_WRITE, filename, domain,
-				       is_delete);
-	if (perm & 1)
-		tomoyo_update_path_acl(TOMOYO_TYPE_EXECUTE, filename, domain,
-				       is_delete);
-	return 0;
-}
-
-/**
- * tomoyo_path_acl2 - Check permission for single path operation.
- *
- * @domain:          Pointer to "struct tomoyo_domain_info".
- * @filename:        Filename to check.
- * @perm:            Permission.
- * @may_use_pattern: True if patterned ACL is permitted.
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path_acl2(const struct tomoyo_domain_info *domain,
-			    const struct tomoyo_path_info *filename,
-			    const u32 perm, const bool may_use_pattern)
-{
-	struct tomoyo_acl_info *ptr;
-	int error = -EPERM;
-
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path_acl *acl;
-		if (ptr->type != TOMOYO_TYPE_PATH_ACL)
-			continue;
-		acl = container_of(ptr, struct tomoyo_path_acl, head);
-		if (perm <= 0xFFFF) {
-			if (!(acl->perm & perm))
-				continue;
-		} else {
-			if (!(acl->perm_high & (perm >> 16)))
-				continue;
-		}
-		if (!tomoyo_compare_name_union_pattern(filename, &acl->name,
-                                                       may_use_pattern))
-			continue;
-		error = 0;
-		break;
-	}
-	return error;
-}
-
-/**
- * tomoyo_check_file_acl - Check permission for opening files.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @filename:  Filename to check.
- * @operation: Mode ("read" or "write" or "read/write" or "execute").
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_check_file_acl(const struct tomoyo_domain_info *domain,
-				 const struct tomoyo_path_info *filename,
-				 const u8 operation)
-{
-	u32 perm = 0;
-
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	if (operation == 6)
-		perm = 1 << TOMOYO_TYPE_READ_WRITE;
-	else if (operation == 4)
-		perm = 1 << TOMOYO_TYPE_READ;
-	else if (operation == 2)
-		perm = 1 << TOMOYO_TYPE_WRITE;
-	else if (operation == 1)
-		perm = 1 << TOMOYO_TYPE_EXECUTE;
-	else
-		BUG();
-	return tomoyo_path_acl2(domain, filename, perm, operation != 1);
-}
-
-/**
- * tomoyo_check_file_perm2 - Check permission for opening files.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @filename:  Filename to check.
- * @perm:      Mode ("read" or "write" or "read/write" or "execute").
- * @operation: Operation name passed used for verbose mode.
- * @mode:      Access control mode.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_check_file_perm2(struct tomoyo_domain_info * const domain,
-				   const struct tomoyo_path_info *filename,
-				   const u8 perm, const char *operation,
-				   const u8 mode)
-{
-	const bool is_enforce = (mode == 3);
-	const char *msg = "<unknown>";
-	int error = 0;
-
-	if (!filename)
-		return 0;
-	error = tomoyo_check_file_acl(domain, filename, perm);
-	if (error && perm == 4 && !domain->ignore_global_allow_read
-	    && tomoyo_is_globally_readable_file(filename))
-		error = 0;
-	if (perm == 6)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_READ_WRITE);
-	else if (perm == 4)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_READ);
-	else if (perm == 2)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_WRITE);
-	else if (perm == 1)
-		msg = tomoyo_path2keyword(TOMOYO_TYPE_EXECUTE);
-	else
-		BUG();
-	if (!error)
-		return 0;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s(%s) %s' denied "
-		       "for %s\n", tomoyo_get_msg(is_enforce), msg, operation,
-		       filename->name, tomoyo_get_last_name(domain));
-	if (is_enforce)
-		return error;
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		/* Don't use patterns for execute permission. */
-		const struct tomoyo_path_info *patterned_file = (perm != 1) ?
-			tomoyo_get_file_pattern(filename) : filename;
-		tomoyo_update_file_acl(patterned_file->name, perm,
-				       domain, false);
-	}
-	return 0;
-}
-
-/**
- * tomoyo_write_file_policy - Update file related list.
- *
- * @data:      String to parse.
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-int tomoyo_write_file_policy(char *data, struct tomoyo_domain_info *domain,
-			     const bool is_delete)
-{
-	char *filename = strchr(data, ' ');
-	char *filename2;
-	unsigned int perm;
-	u8 type;
-
-	if (!filename)
-		return -EINVAL;
-	*filename++ = '\0';
-	if (sscanf(data, "%u", &perm) == 1)
-		return tomoyo_update_file_acl(filename, (u8) perm, domain,
-					      is_delete);
-	if (strncmp(data, "allow_", 6))
-		goto out;
-	data += 6;
-	for (type = 0; type < TOMOYO_MAX_PATH_OPERATION; type++) {
-		if (strcmp(data, tomoyo_path_keyword[type]))
-			continue;
-		return tomoyo_update_path_acl(type, filename, domain,
-					      is_delete);
-	}
-	filename2 = strchr(filename, ' ');
-	if (!filename2)
-		goto out;
-	*filename2++ = '\0';
-	for (type = 0; type < TOMOYO_MAX_PATH2_OPERATION; type++) {
-		if (strcmp(data, tomoyo_path2_keyword[type]))
-			continue;
-		return tomoyo_update_path2_acl(type, filename, filename2,
-					       domain, is_delete);
-	}
- out:
-	return -EINVAL;
+	*a_perm = perm;
+	return !perm;
 }
 
 /**
@@ -826,70 +607,123 @@
  * Caller holds tomoyo_read_lock().
  */
 static int tomoyo_update_path_acl(const u8 type, const char *filename,
-				  struct tomoyo_domain_info *const domain,
+				  struct tomoyo_domain_info * const domain,
 				  const bool is_delete)
 {
-	static const u32 tomoyo_rw_mask =
-		(1 << TOMOYO_TYPE_READ) | (1 << TOMOYO_TYPE_WRITE);
-	const u32 perm = 1 << type;
-	struct tomoyo_acl_info *ptr;
 	struct tomoyo_path_acl e = {
 		.head.type = TOMOYO_TYPE_PATH_ACL,
-		.perm_high = perm >> 16,
-		.perm = perm
+		.perm = 1 << type
 	};
-	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (type == TOMOYO_TYPE_READ_WRITE)
-		e.perm |= tomoyo_rw_mask;
-	if (!domain)
-		return -EINVAL;
+	int error;
+	if (e.perm == (1 << TOMOYO_TYPE_READ_WRITE))
+		e.perm |= TOMOYO_RW_MASK;
 	if (!tomoyo_parse_name_union(filename, &e.name))
 		return -EINVAL;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path_acl *acl =
-			container_of(ptr, struct tomoyo_path_acl, head);
-		if (!tomoyo_is_same_path_acl(acl, &e))
-			continue;
-		if (is_delete) {
-			if (perm <= 0xFFFF)
-				acl->perm &= ~perm;
-			else
-				acl->perm_high &= ~(perm >> 16);
-			if ((acl->perm & tomoyo_rw_mask) != tomoyo_rw_mask)
-				acl->perm &= ~(1 << TOMOYO_TYPE_READ_WRITE);
-			else if (!(acl->perm & (1 << TOMOYO_TYPE_READ_WRITE)))
-				acl->perm &= ~tomoyo_rw_mask;
-		} else {
-			if (perm <= 0xFFFF)
-				acl->perm |= perm;
-			else
-				acl->perm_high |= (perm >> 16);
-			if ((acl->perm & tomoyo_rw_mask) == tomoyo_rw_mask)
-				acl->perm |= 1 << TOMOYO_TYPE_READ_WRITE;
-			else if (acl->perm & (1 << TOMOYO_TYPE_READ_WRITE))
-				acl->perm |= tomoyo_rw_mask;
-		}
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path_acl *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->head.list,
-					  &domain->acl_info_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path_acl,
+				     tomoyo_merge_path_acl);
 	tomoyo_put_name_union(&e.name);
 	return error;
 }
 
+static bool tomoyo_same_mkdev_acl(const struct tomoyo_acl_info *a,
+					 const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_mkdev_acl *p1 = container_of(a, typeof(*p1),
+								head);
+	const struct tomoyo_mkdev_acl *p2 = container_of(b, typeof(*p2),
+								head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name, &p2->name)
+		&& tomoyo_same_number_union(&p1->mode, &p2->mode)
+		&& tomoyo_same_number_union(&p1->major, &p2->major)
+		&& tomoyo_same_number_union(&p1->minor, &p2->minor);
+}
+
+static bool tomoyo_merge_mkdev_acl(struct tomoyo_acl_info *a,
+					  struct tomoyo_acl_info *b,
+					  const bool is_delete)
+{
+	u8 *const a_perm = &container_of(a, struct tomoyo_mkdev_acl,
+					 head)->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_mkdev_acl, head)
+		->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
+}
+
+/**
+ * tomoyo_update_mkdev_acl - Update "struct tomoyo_mkdev_acl" list.
+ *
+ * @type:      Type of operation.
+ * @filename:  Filename.
+ * @mode:      Create mode.
+ * @major:     Device major number.
+ * @minor:     Device minor number.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static int tomoyo_update_mkdev_acl(const u8 type, const char *filename,
+					  char *mode, char *major, char *minor,
+					  struct tomoyo_domain_info * const
+					  domain, const bool is_delete)
+{
+	struct tomoyo_mkdev_acl e = {
+		.head.type = TOMOYO_TYPE_MKDEV_ACL,
+		.perm = 1 << type
+	};
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	if (!tomoyo_parse_name_union(filename, &e.name) ||
+	    !tomoyo_parse_number_union(mode, &e.mode) ||
+	    !tomoyo_parse_number_union(major, &e.major) ||
+	    !tomoyo_parse_number_union(minor, &e.minor))
+		goto out;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_mkdev_acl,
+				     tomoyo_merge_mkdev_acl);
+ out:
+	tomoyo_put_name_union(&e.name);
+	tomoyo_put_number_union(&e.mode);
+	tomoyo_put_number_union(&e.major);
+	tomoyo_put_number_union(&e.minor);
+	return error;
+}
+
+static bool tomoyo_same_path2_acl(const struct tomoyo_acl_info *a,
+				  const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_path2_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_path2_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name1, &p2->name1)
+		&& tomoyo_same_name_union(&p1->name2, &p2->name2);
+}
+
+static bool tomoyo_merge_path2_acl(struct tomoyo_acl_info *a,
+				   struct tomoyo_acl_info *b,
+				   const bool is_delete)
+{
+	u8 * const a_perm = &container_of(a, struct tomoyo_path2_acl, head)
+		->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_path2_acl, head)->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
+}
+
 /**
  * tomoyo_update_path2_acl - Update "struct tomoyo_path2_acl" list.
  *
@@ -905,46 +739,20 @@
  */
 static int tomoyo_update_path2_acl(const u8 type, const char *filename1,
 				   const char *filename2,
-				   struct tomoyo_domain_info *const domain,
+				   struct tomoyo_domain_info * const domain,
 				   const bool is_delete)
 {
-	const u8 perm = 1 << type;
 	struct tomoyo_path2_acl e = {
 		.head.type = TOMOYO_TYPE_PATH2_ACL,
-		.perm = perm
+		.perm = 1 << type
 	};
-	struct tomoyo_acl_info *ptr;
 	int error = is_delete ? -ENOENT : -ENOMEM;
-
-	if (!domain)
-		return -EINVAL;
 	if (!tomoyo_parse_name_union(filename1, &e.name1) ||
 	    !tomoyo_parse_name_union(filename2, &e.name2))
 		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path2_acl *acl =
-			container_of(ptr, struct tomoyo_path2_acl, head);
-		if (!tomoyo_is_same_path2_acl(acl, &e))
-			continue;
-		if (is_delete)
-			acl->perm &= ~perm;
-		else
-			acl->perm |= perm;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path2_acl *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->head.list,
-					  &domain->acl_info_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path2_acl,
+				     tomoyo_merge_path2_acl);
  out:
 	tomoyo_put_name_union(&e.name1);
 	tomoyo_put_name_union(&e.name2);
@@ -952,134 +760,158 @@
 }
 
 /**
- * tomoyo_path_acl - Check permission for single path operation.
+ * tomoyo_path_permission - Check permission for single path operation.
  *
- * @domain:   Pointer to "struct tomoyo_domain_info".
- * @type:     Type of operation.
- * @filename: Filename to check.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path_acl(struct tomoyo_domain_info *domain, const u8 type,
-			   const struct tomoyo_path_info *filename)
-{
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	return tomoyo_path_acl2(domain, filename, 1 << type, 1);
-}
-
-/**
- * tomoyo_path2_acl - Check permission for double path operation.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @type:      Type of operation.
- * @filename1: First filename to check.
- * @filename2: Second filename to check.
- *
- * Returns 0 on success, -EPERM otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-static int tomoyo_path2_acl(const struct tomoyo_domain_info *domain,
-			    const u8 type,
-			    const struct tomoyo_path_info *filename1,
-			    const struct tomoyo_path_info *filename2)
-{
-	struct tomoyo_acl_info *ptr;
-	const u8 perm = 1 << type;
-	int error = -EPERM;
-
-	if (!tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE))
-		return 0;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
-		struct tomoyo_path2_acl *acl;
-		if (ptr->type != TOMOYO_TYPE_PATH2_ACL)
-			continue;
-		acl = container_of(ptr, struct tomoyo_path2_acl, head);
-		if (!(acl->perm & perm))
-			continue;
-		if (!tomoyo_compare_name_union(filename1, &acl->name1))
-			continue;
-		if (!tomoyo_compare_name_union(filename2, &acl->name2))
-			continue;
-		error = 0;
-		break;
-	}
-	return error;
-}
-
-/**
- * tomoyo_path_permission2 - Check permission for single path operation.
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @r:         Pointer to "struct tomoyo_request_info".
  * @operation: Type of operation.
  * @filename:  Filename to check.
- * @mode:      Access control mode.
  *
  * Returns 0 on success, negative value otherwise.
  *
  * Caller holds tomoyo_read_lock().
  */
-static int tomoyo_path_permission2(struct tomoyo_domain_info *const domain,
-				   u8 operation,
-				   const struct tomoyo_path_info *filename,
-				   const u8 mode)
+int tomoyo_path_permission(struct tomoyo_request_info *r, u8 operation,
+			   const struct tomoyo_path_info *filename)
 {
-	const char *msg;
 	int error;
-	const bool is_enforce = (mode == 3);
 
-	if (!mode)
-		return 0;
  next:
-	error = tomoyo_path_acl(domain, operation, filename);
-	msg = tomoyo_path2keyword(operation);
-	if (!error)
-		goto ok;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s %s' denied for %s\n",
-		       tomoyo_get_msg(is_enforce), msg, filename->name,
-		       tomoyo_get_last_name(domain));
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		const char *name = tomoyo_get_file_pattern(filename)->name;
-		tomoyo_update_path_acl(operation, name, domain, false);
-	}
-	if (!is_enforce)
-		error = 0;
- ok:
+	r->type = tomoyo_p2mac[operation];
+	r->mode = tomoyo_get_mode(r->profile, r->type);
+	if (r->mode == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	r->param_type = TOMOYO_TYPE_PATH_ACL;
+	r->param.path.filename = filename;
+	r->param.path.operation = operation;
+	do {
+		tomoyo_check_acl(r, tomoyo_check_path_acl);
+		if (!r->granted && operation == TOMOYO_TYPE_READ &&
+		    !r->domain->ignore_global_allow_read &&
+		    tomoyo_globally_readable_file(filename))
+			r->granted = true;
+		error = tomoyo_audit_path_log(r);
+		/*
+		 * Do not retry for execute request, for alias may have
+		 * changed.
+		 */
+	} while (error == TOMOYO_RETRY_REQUEST &&
+		 operation != TOMOYO_TYPE_EXECUTE);
 	/*
 	 * Since "allow_truncate" doesn't imply "allow_rewrite" permission,
 	 * we need to check "allow_rewrite" permission if the filename is
 	 * specified by "deny_rewrite" keyword.
 	 */
 	if (!error && operation == TOMOYO_TYPE_TRUNCATE &&
-	    tomoyo_is_no_rewrite_file(filename)) {
+	    tomoyo_no_rewrite_file(filename)) {
 		operation = TOMOYO_TYPE_REWRITE;
 		goto next;
 	}
 	return error;
 }
 
-/**
- * tomoyo_check_exec_perm - Check permission for "execute".
- *
- * @domain:   Pointer to "struct tomoyo_domain_info".
- * @filename: Check permission for "execute".
- *
- * Returns 0 on success, negativevalue otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
-			   const struct tomoyo_path_info *filename)
+static bool tomoyo_same_path_number_acl(const struct tomoyo_acl_info *a,
+					const struct tomoyo_acl_info *b)
 {
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
+	const struct tomoyo_path_number_acl *p1 = container_of(a, typeof(*p1),
+							       head);
+	const struct tomoyo_path_number_acl *p2 = container_of(b, typeof(*p2),
+							       head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head)
+		&& tomoyo_same_name_union(&p1->name, &p2->name)
+		&& tomoyo_same_number_union(&p1->number, &p2->number);
+}
 
-	if (!mode)
+static bool tomoyo_merge_path_number_acl(struct tomoyo_acl_info *a,
+					 struct tomoyo_acl_info *b,
+					 const bool is_delete)
+{
+	u8 * const a_perm = &container_of(a, struct tomoyo_path_number_acl,
+					  head)->perm;
+	u8 perm = *a_perm;
+	const u8 b_perm = container_of(b, struct tomoyo_path_number_acl, head)
+		->perm;
+	if (is_delete)
+		perm &= ~b_perm;
+	else
+		perm |= b_perm;
+	*a_perm = perm;
+	return !perm;
+}
+
+/**
+ * tomoyo_update_path_number_acl - Update ioctl/chmod/chown/chgrp ACL.
+ *
+ * @type:      Type of operation.
+ * @filename:  Filename.
+ * @number:    Number.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_update_path_number_acl(const u8 type, const char *filename,
+					 char *number,
+					 struct tomoyo_domain_info * const
+					 domain,
+					 const bool is_delete)
+{
+	struct tomoyo_path_number_acl e = {
+		.head.type = TOMOYO_TYPE_PATH_NUMBER_ACL,
+		.perm = 1 << type
+	};
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	if (!tomoyo_parse_name_union(filename, &e.name))
+		return -EINVAL;
+	if (!tomoyo_parse_number_union(number, &e.number))
+		goto out;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_path_number_acl,
+				     tomoyo_merge_path_number_acl);
+ out:
+	tomoyo_put_name_union(&e.name);
+	tomoyo_put_number_union(&e.number);
+	return error;
+}
+
+/**
+ * tomoyo_path_number_perm - Check permission for "create", "mkdir", "mkfifo", "mksock", "ioctl", "chmod", "chown", "chgrp".
+ *
+ * @type:   Type of operation.
+ * @path:   Pointer to "struct path".
+ * @number: Number.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+int tomoyo_path_number_perm(const u8 type, struct path *path,
+			    unsigned long number)
+{
+	struct tomoyo_request_info r;
+	int error = -ENOMEM;
+	struct tomoyo_path_info buf;
+	int idx;
+
+	if (tomoyo_init_request_info(&r, NULL, tomoyo_pn2mac[type])
+	    == TOMOYO_CONFIG_DISABLED || !path->mnt || !path->dentry)
 		return 0;
-	return tomoyo_check_file_perm2(domain, filename, 1, "do_execve", mode);
+	idx = tomoyo_read_lock();
+	if (!tomoyo_get_realpath(&buf, path))
+		goto out;
+	if (type == TOMOYO_TYPE_MKDIR)
+		tomoyo_add_slash(&buf);
+	r.param_type = TOMOYO_TYPE_PATH_NUMBER_ACL;
+	r.param.path_number.operation = type;
+	r.param.path_number.filename = &buf;
+	r.param.path_number.number = number;
+	do {
+		tomoyo_check_acl(&r, tomoyo_check_path_number_acl);
+		error = tomoyo_audit_path_number_log(&r);
+	} while (error == TOMOYO_RETRY_REQUEST);
+	kfree(buf.name);
+ out:
+	tomoyo_read_unlock(idx);
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
+		error = 0;
+	return error;
 }
 
 /**
@@ -1096,24 +928,17 @@
 {
 	const u8 acc_mode = ACC_MODE(flag);
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf;
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	struct tomoyo_path_info buf;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path->mnt)
+	if (!path->mnt ||
+	    (path->dentry->d_inode && S_ISDIR(path->dentry->d_inode->i_mode)))
 		return 0;
-	if (acc_mode == 0)
-		return 0;
-	if (path->dentry->d_inode && S_ISDIR(path->dentry->d_inode->i_mode))
-		/*
-		 * I don't check directories here because mkdir() and rmdir()
-		 * don't call me.
-		 */
-		return 0;
+	buf.name = NULL;
+	r.mode = TOMOYO_CONFIG_DISABLED;
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(path);
-	if (!buf)
+	if (!tomoyo_get_realpath(&buf, path))
 		goto out;
 	error = 0;
 	/*
@@ -1121,28 +946,43 @@
 	 * we need to check "allow_rewrite" permission when the filename is not
 	 * opened for append mode or the filename is truncated at open time.
 	 */
-	if ((acc_mode & MAY_WRITE) &&
-	    ((flag & O_TRUNC) || !(flag & O_APPEND)) &&
-	    (tomoyo_is_no_rewrite_file(buf))) {
-		error = tomoyo_path_permission2(domain, TOMOYO_TYPE_REWRITE,
-						buf, mode);
+	if ((acc_mode & MAY_WRITE) && !(flag & O_APPEND)
+	    && tomoyo_init_request_info(&r, domain, TOMOYO_MAC_FILE_REWRITE)
+	    != TOMOYO_CONFIG_DISABLED) {
+		if (!tomoyo_get_realpath(&buf, path)) {
+			error = -ENOMEM;
+			goto out;
+		}
+		if (tomoyo_no_rewrite_file(&buf))
+			error = tomoyo_path_permission(&r, TOMOYO_TYPE_REWRITE,
+						       &buf);
 	}
-	if (!error)
-		error = tomoyo_check_file_perm2(domain, buf, acc_mode, "open",
-						mode);
-	if (!error && (flag & O_TRUNC))
-		error = tomoyo_path_permission2(domain, TOMOYO_TYPE_TRUNCATE,
-						buf, mode);
+	if (!error && acc_mode &&
+	    tomoyo_init_request_info(&r, domain, TOMOYO_MAC_FILE_OPEN)
+	    != TOMOYO_CONFIG_DISABLED) {
+		u8 operation;
+		if (!buf.name && !tomoyo_get_realpath(&buf, path)) {
+			error = -ENOMEM;
+			goto out;
+		}
+		if (acc_mode == (MAY_READ | MAY_WRITE))
+			operation = TOMOYO_TYPE_READ_WRITE;
+		else if (acc_mode == MAY_READ)
+			operation = TOMOYO_TYPE_READ;
+		else
+			operation = TOMOYO_TYPE_WRITE;
+		error = tomoyo_path_permission(&r, operation, &buf);
+	}
  out:
-	kfree(buf);
+	kfree(buf.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
 
 /**
- * tomoyo_path_perm - Check permission for "create", "unlink", "mkdir", "rmdir", "mkfifo", "mksock", "mkblock", "mkchar", "truncate", "symlink", "ioctl", "chmod", "chown", "chgrp", "chroot", "mount" and "unmount".
+ * tomoyo_path_perm - Check permission for "unlink", "rmdir", "truncate", "symlink", "rewrite", "chroot" and "unmount".
  *
  * @operation: Type of operation.
  * @path:      Pointer to "struct path".
@@ -1152,71 +992,79 @@
 int tomoyo_path_perm(const u8 operation, struct path *path)
 {
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
+	struct tomoyo_path_info buf;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path->mnt)
+	if (!path->mnt)
 		return 0;
+	if (tomoyo_init_request_info(&r, NULL, tomoyo_p2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	buf.name = NULL;
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(path);
-	if (!buf)
+	if (!tomoyo_get_realpath(&buf, path))
 		goto out;
 	switch (operation) {
-	case TOMOYO_TYPE_MKDIR:
+	case TOMOYO_TYPE_REWRITE:
+		if (!tomoyo_no_rewrite_file(&buf)) {
+			error = 0;
+			goto out;
+		}
+		break;
 	case TOMOYO_TYPE_RMDIR:
 	case TOMOYO_TYPE_CHROOT:
-		if (!buf->is_dir) {
-			/*
-			 * tomoyo_get_path() reserves space for appending "/."
-			 */
-			strcat((char *) buf->name, "/");
-			tomoyo_fill_path_info(buf);
-		}
+	case TOMOYO_TYPE_UMOUNT:
+		tomoyo_add_slash(&buf);
+		break;
 	}
-	error = tomoyo_path_permission2(domain, operation, buf, mode);
+	error = tomoyo_path_permission(&r, operation, &buf);
  out:
-	kfree(buf);
+	kfree(buf.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
 
 /**
- * tomoyo_check_rewrite_permission - Check permission for "rewrite".
+ * tomoyo_mkdev_perm - Check permission for "mkblock" and "mkchar".
  *
- * @filp: Pointer to "struct file".
+ * @operation: Type of operation. (TOMOYO_TYPE_MKCHAR or TOMOYO_TYPE_MKBLOCK)
+ * @path:      Pointer to "struct path".
+ * @mode:      Create mode.
+ * @dev:       Device number.
  *
  * Returns 0 on success, negative value otherwise.
  */
-int tomoyo_check_rewrite_permission(struct file *filp)
+int tomoyo_mkdev_perm(const u8 operation, struct path *path,
+			     const unsigned int mode, unsigned int dev)
 {
+	struct tomoyo_request_info r;
 	int error = -ENOMEM;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
-	struct tomoyo_path_info *buf;
+	struct tomoyo_path_info buf;
 	int idx;
 
-	if (!mode || !filp->f_path.mnt)
+	if (!path->mnt ||
+	    tomoyo_init_request_info(&r, NULL, tomoyo_pnnn2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
 		return 0;
-
 	idx = tomoyo_read_lock();
-	buf = tomoyo_get_path(&filp->f_path);
-	if (!buf)
-		goto out;
-	if (!tomoyo_is_no_rewrite_file(buf)) {
-		error = 0;
-		goto out;
+	error = -ENOMEM;
+	if (tomoyo_get_realpath(&buf, path)) {
+		dev = new_decode_dev(dev);
+		r.param_type = TOMOYO_TYPE_MKDEV_ACL;
+		r.param.mkdev.filename = &buf;
+		r.param.mkdev.operation = operation;
+		r.param.mkdev.mode = mode;
+		r.param.mkdev.major = MAJOR(dev);
+		r.param.mkdev.minor = MINOR(dev);
+		tomoyo_check_acl(&r, tomoyo_check_mkdev_acl);
+		error = tomoyo_audit_mkdev_log(&r);
+		kfree(buf.name);
 	}
-	error = tomoyo_path_permission2(domain, TOMOYO_TYPE_REWRITE, buf, mode);
- out:
-	kfree(buf);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
@@ -1234,56 +1082,99 @@
 		      struct path *path2)
 {
 	int error = -ENOMEM;
-	struct tomoyo_path_info *buf1, *buf2;
-	struct tomoyo_domain_info *domain = tomoyo_domain();
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-	const bool is_enforce = (mode == 3);
-	const char *msg;
+	struct tomoyo_path_info buf1;
+	struct tomoyo_path_info buf2;
+	struct tomoyo_request_info r;
 	int idx;
 
-	if (!mode || !path1->mnt || !path2->mnt)
+	if (!path1->mnt || !path2->mnt ||
+	    tomoyo_init_request_info(&r, NULL, tomoyo_pp2mac[operation])
+	    == TOMOYO_CONFIG_DISABLED)
 		return 0;
+	buf1.name = NULL;
+	buf2.name = NULL;
 	idx = tomoyo_read_lock();
-	buf1 = tomoyo_get_path(path1);
-	buf2 = tomoyo_get_path(path2);
-	if (!buf1 || !buf2)
+	if (!tomoyo_get_realpath(&buf1, path1) ||
+	    !tomoyo_get_realpath(&buf2, path2))
 		goto out;
-	{
-		struct dentry *dentry = path1->dentry;
-		if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) {
-			/*
-			 * tomoyo_get_path() reserves space for appending "/."
-			 */
-			if (!buf1->is_dir) {
-				strcat((char *) buf1->name, "/");
-				tomoyo_fill_path_info(buf1);
-			}
-			if (!buf2->is_dir) {
-				strcat((char *) buf2->name, "/");
-				tomoyo_fill_path_info(buf2);
-			}
-		}
-	}
-	error = tomoyo_path2_acl(domain, operation, buf1, buf2);
-	msg = tomoyo_path22keyword(operation);
-	if (!error)
-		goto out;
-	if (tomoyo_verbose_mode(domain))
-		printk(KERN_WARNING "TOMOYO-%s: Access '%s %s %s' "
-		       "denied for %s\n", tomoyo_get_msg(is_enforce),
-		       msg, buf1->name, buf2->name,
-		       tomoyo_get_last_name(domain));
-	if (mode == 1 && tomoyo_domain_quota_is_ok(domain)) {
-		const char *name1 = tomoyo_get_file_pattern(buf1)->name;
-		const char *name2 = tomoyo_get_file_pattern(buf2)->name;
-		tomoyo_update_path2_acl(operation, name1, name2, domain,
-					false);
-	}
+	switch (operation) {
+		struct dentry *dentry;
+	case TOMOYO_TYPE_RENAME:
+        case TOMOYO_TYPE_LINK:
+		dentry = path1->dentry;
+	        if (!dentry->d_inode || !S_ISDIR(dentry->d_inode->i_mode))
+                        break;
+                /* fall through */
+        case TOMOYO_TYPE_PIVOT_ROOT:
+                tomoyo_add_slash(&buf1);
+                tomoyo_add_slash(&buf2);
+		break;
+        }
+	r.param_type = TOMOYO_TYPE_PATH2_ACL;
+	r.param.path2.operation = operation;
+	r.param.path2.filename1 = &buf1;
+	r.param.path2.filename2 = &buf2;
+	do {
+		tomoyo_check_acl(&r, tomoyo_check_path2_acl);
+		error = tomoyo_audit_path2_log(&r);
+	} while (error == TOMOYO_RETRY_REQUEST);
  out:
-	kfree(buf1);
-	kfree(buf2);
+	kfree(buf1.name);
+	kfree(buf2.name);
 	tomoyo_read_unlock(idx);
-	if (!is_enforce)
+	if (r.mode != TOMOYO_CONFIG_ENFORCING)
 		error = 0;
 	return error;
 }
+
+/**
+ * tomoyo_write_file - Update file related list.
+ *
+ * @data:      String to parse.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+int tomoyo_write_file(char *data, struct tomoyo_domain_info *domain,
+		      const bool is_delete)
+{
+	char *w[5];
+	u8 type;
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
+		return -EINVAL;
+	if (strncmp(w[0], "allow_", 6))
+		goto out;
+	w[0] += 6;
+	for (type = 0; type < TOMOYO_MAX_PATH_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path_keyword[type]))
+			continue;
+		return tomoyo_update_path_acl(type, w[1], domain, is_delete);
+	}
+	if (!w[2][0])
+		goto out;
+	for (type = 0; type < TOMOYO_MAX_PATH2_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path2_keyword[type]))
+			continue;
+		return tomoyo_update_path2_acl(type, w[1], w[2], domain,
+					       is_delete);
+	}
+	for (type = 0; type < TOMOYO_MAX_PATH_NUMBER_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_path_number_keyword[type]))
+			continue;
+		return tomoyo_update_path_number_acl(type, w[1], w[2], domain,
+						     is_delete);
+	}
+	if (!w[3][0] || !w[4][0])
+		goto out;
+	for (type = 0; type < TOMOYO_MAX_MKDEV_OPERATION; type++) {
+		if (strcmp(w[0], tomoyo_mkdev_keyword[type]))
+			continue;
+		return tomoyo_update_mkdev_acl(type, w[1], w[2], w[3],
+					       w[4], domain, is_delete);
+	}
+ out:
+	return -EINVAL;
+}
diff --git a/security/tomoyo/gc.c b/security/tomoyo/gc.c
index b9cc71b..a877e4c 100644
--- a/security/tomoyo/gc.c
+++ b/security/tomoyo/gc.c
@@ -11,83 +11,75 @@
 #include <linux/kthread.h>
 #include <linux/slab.h>
 
-enum tomoyo_gc_id {
-	TOMOYO_ID_PATH_GROUP,
-	TOMOYO_ID_PATH_GROUP_MEMBER,
-	TOMOYO_ID_DOMAIN_INITIALIZER,
-	TOMOYO_ID_DOMAIN_KEEPER,
-	TOMOYO_ID_ALIAS,
-	TOMOYO_ID_GLOBALLY_READABLE,
-	TOMOYO_ID_PATTERN,
-	TOMOYO_ID_NO_REWRITE,
-	TOMOYO_ID_MANAGER,
-	TOMOYO_ID_NAME,
-	TOMOYO_ID_ACL,
-	TOMOYO_ID_DOMAIN
-};
-
-struct tomoyo_gc_entry {
+struct tomoyo_gc {
 	struct list_head list;
 	int type;
-	void *element;
+	struct list_head *element;
 };
 static LIST_HEAD(tomoyo_gc_queue);
 static DEFINE_MUTEX(tomoyo_gc_mutex);
 
 /* Caller holds tomoyo_policy_lock mutex. */
-static bool tomoyo_add_to_gc(const int type, void *element)
+static bool tomoyo_add_to_gc(const int type, struct list_head *element)
 {
-	struct tomoyo_gc_entry *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
+	struct tomoyo_gc *entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
 	if (!entry)
 		return false;
 	entry->type = type;
 	entry->element = element;
 	list_add(&entry->list, &tomoyo_gc_queue);
+	list_del_rcu(element);
 	return true;
 }
 
-static void tomoyo_del_allow_read
-(struct tomoyo_globally_readable_file_entry *ptr)
+static void tomoyo_del_allow_read(struct list_head *element)
 {
+	struct tomoyo_readable_file *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->filename);
 }
 
-static void tomoyo_del_file_pattern(struct tomoyo_pattern_entry *ptr)
+static void tomoyo_del_file_pattern(struct list_head *element)
 {
+	struct tomoyo_no_pattern *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->pattern);
 }
 
-static void tomoyo_del_no_rewrite(struct tomoyo_no_rewrite_entry *ptr)
+static void tomoyo_del_no_rewrite(struct list_head *element)
 {
+	struct tomoyo_no_rewrite *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->pattern);
 }
 
-static void tomoyo_del_domain_initializer
-(struct tomoyo_domain_initializer_entry *ptr)
+static void tomoyo_del_transition_control(struct list_head *element)
 {
+	struct tomoyo_transition_control *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->domainname);
 	tomoyo_put_name(ptr->program);
 }
 
-static void tomoyo_del_domain_keeper(struct tomoyo_domain_keeper_entry *ptr)
+static void tomoyo_del_aggregator(struct list_head *element)
 {
-	tomoyo_put_name(ptr->domainname);
-	tomoyo_put_name(ptr->program);
-}
-
-static void tomoyo_del_alias(struct tomoyo_alias_entry *ptr)
-{
+	struct tomoyo_aggregator *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->original_name);
-	tomoyo_put_name(ptr->aliased_name);
+	tomoyo_put_name(ptr->aggregated_name);
 }
 
-static void tomoyo_del_manager(struct tomoyo_policy_manager_entry *ptr)
+static void tomoyo_del_manager(struct list_head *element)
 {
+	struct tomoyo_manager *ptr =
+		container_of(element, typeof(*ptr), head.list);
 	tomoyo_put_name(ptr->manager);
 }
 
-static void tomoyo_del_acl(struct tomoyo_acl_info *acl)
+static void tomoyo_del_acl(struct list_head *element)
 {
+	struct tomoyo_acl_info *acl =
+		container_of(element, typeof(*acl), list);
 	switch (acl->type) {
 	case TOMOYO_TYPE_PATH_ACL:
 		{
@@ -104,14 +96,41 @@
 			tomoyo_put_name_union(&entry->name2);
 		}
 		break;
-	default:
-		printk(KERN_WARNING "Unknown type\n");
+	case TOMOYO_TYPE_PATH_NUMBER_ACL:
+		{
+			struct tomoyo_path_number_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->name);
+			tomoyo_put_number_union(&entry->number);
+		}
+		break;
+	case TOMOYO_TYPE_MKDEV_ACL:
+		{
+			struct tomoyo_mkdev_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->name);
+			tomoyo_put_number_union(&entry->mode);
+			tomoyo_put_number_union(&entry->major);
+			tomoyo_put_number_union(&entry->minor);
+		}
+		break;
+	case TOMOYO_TYPE_MOUNT_ACL:
+		{
+			struct tomoyo_mount_acl *entry
+				= container_of(acl, typeof(*entry), head);
+			tomoyo_put_name_union(&entry->dev_name);
+			tomoyo_put_name_union(&entry->dir_name);
+			tomoyo_put_name_union(&entry->fs_type);
+			tomoyo_put_number_union(&entry->flags);
+		}
 		break;
 	}
 }
 
-static bool tomoyo_del_domain(struct tomoyo_domain_info *domain)
+static bool tomoyo_del_domain(struct list_head *element)
 {
+	struct tomoyo_domain_info *domain =
+		container_of(element, typeof(*domain), list);
 	struct tomoyo_acl_info *acl;
 	struct tomoyo_acl_info *tmp;
 	/*
@@ -139,7 +158,7 @@
 	if (atomic_read(&domain->users))
 		return false;
 	list_for_each_entry_safe(acl, tmp, &domain->acl_info_list, list) {
-		tomoyo_del_acl(acl);
+		tomoyo_del_acl(&acl->list);
 		tomoyo_memory_free(acl);
 	}
 	tomoyo_put_name(domain->domainname);
@@ -147,135 +166,70 @@
 }
 
 
-static void tomoyo_del_name(const struct tomoyo_name_entry *ptr)
+static void tomoyo_del_name(struct list_head *element)
 {
+	const struct tomoyo_name *ptr =
+		container_of(element, typeof(*ptr), list);
 }
 
-static void tomoyo_del_path_group_member(struct tomoyo_path_group_member
-					 *member)
+static void tomoyo_del_path_group(struct list_head *element)
 {
+	struct tomoyo_path_group *member =
+		container_of(element, typeof(*member), head.list);
 	tomoyo_put_name(member->member_name);
 }
 
-static void tomoyo_del_path_group(struct tomoyo_path_group *group)
+static void tomoyo_del_group(struct list_head *element)
 {
+	struct tomoyo_group *group =
+		container_of(element, typeof(*group), list);
 	tomoyo_put_name(group->group_name);
 }
 
+static void tomoyo_del_number_group(struct list_head *element)
+{
+	struct tomoyo_number_group *member =
+		container_of(element, typeof(*member), head.list);
+}
+
+static bool tomoyo_collect_member(struct list_head *member_list, int id)
+{
+	struct tomoyo_acl_head *member;
+	list_for_each_entry(member, member_list, list) {
+		if (!member->is_deleted)
+			continue;
+		if (!tomoyo_add_to_gc(id, &member->list))
+			return false;
+	}
+        return true;
+}
+
+static bool tomoyo_collect_acl(struct tomoyo_domain_info *domain)
+{
+	struct tomoyo_acl_info *acl;
+	list_for_each_entry(acl, &domain->acl_info_list, list) {
+		if (!acl->is_deleted)
+			continue;
+		if (!tomoyo_add_to_gc(TOMOYO_ID_ACL, &acl->list))
+			return false;
+	}
+	return true;
+}
+
 static void tomoyo_collect_entry(void)
 {
+	int i;
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		return;
-	{
-		struct tomoyo_globally_readable_file_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_globally_readable_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_GLOBALLY_READABLE, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_pattern_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_pattern_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_PATTERN, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_no_rewrite_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_no_rewrite_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_NO_REWRITE, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_domain_initializer_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_domain_initializer_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN_INITIALIZER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_domain_keeper_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_domain_keeper_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN_KEEPER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_alias_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_alias_list, list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_ALIAS, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
-	}
-	{
-		struct tomoyo_policy_manager_entry *ptr;
-		list_for_each_entry_rcu(ptr, &tomoyo_policy_manager_list,
-					list) {
-			if (!ptr->is_deleted)
-				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_MANAGER, ptr))
-				list_del_rcu(&ptr->list);
-			else
-				break;
-		}
+	for (i = 0; i < TOMOYO_MAX_POLICY; i++) {
+		if (!tomoyo_collect_member(&tomoyo_policy_list[i], i))
+			goto unlock;
 	}
 	{
 		struct tomoyo_domain_info *domain;
 		list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
-			struct tomoyo_acl_info *acl;
-			list_for_each_entry_rcu(acl, &domain->acl_info_list,
-						list) {
-				switch (acl->type) {
-				case TOMOYO_TYPE_PATH_ACL:
-					if (container_of(acl,
-					 struct tomoyo_path_acl,
-							 head)->perm ||
-					    container_of(acl,
-					 struct tomoyo_path_acl,
-							 head)->perm_high)
-						continue;
-					break;
-				case TOMOYO_TYPE_PATH2_ACL:
-					if (container_of(acl,
-					 struct tomoyo_path2_acl,
-							 head)->perm)
-						continue;
-					break;
-				default:
-					continue;
-				}
-				if (tomoyo_add_to_gc(TOMOYO_ID_ACL, acl))
-					list_del_rcu(&acl->list);
-				else
-					break;
-			}
+			if (!tomoyo_collect_acl(domain))
+				goto unlock;
 			if (!domain->is_deleted || atomic_read(&domain->users))
 				continue;
 			/*
@@ -283,104 +237,92 @@
 			 * refer this domain after successful execve().
 			 * We recheck domain->users after SRCU synchronization.
 			 */
-			if (tomoyo_add_to_gc(TOMOYO_ID_DOMAIN, domain))
-				list_del_rcu(&domain->list);
-			else
-				break;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_DOMAIN, &domain->list))
+				goto unlock;
 		}
 	}
-	{
-		int i;
-		for (i = 0; i < TOMOYO_MAX_HASH; i++) {
-			struct tomoyo_name_entry *ptr;
-			list_for_each_entry_rcu(ptr, &tomoyo_name_list[i],
-						list) {
-				if (atomic_read(&ptr->users))
-					continue;
-				if (tomoyo_add_to_gc(TOMOYO_ID_NAME, ptr))
-					list_del_rcu(&ptr->list);
-				else {
-					i = TOMOYO_MAX_HASH;
-					break;
-				}
-			}
+	for (i = 0; i < TOMOYO_MAX_HASH; i++) {
+		struct tomoyo_name *ptr;
+		list_for_each_entry_rcu(ptr, &tomoyo_name_list[i], list) {
+			if (atomic_read(&ptr->users))
+				continue;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_NAME, &ptr->list))
+				goto unlock;
 		}
 	}
-	{
-		struct tomoyo_path_group *group;
-		list_for_each_entry_rcu(group, &tomoyo_path_group_list, list) {
-			struct tomoyo_path_group_member *member;
-			list_for_each_entry_rcu(member, &group->member_list,
-						list) {
-				if (!member->is_deleted)
-					continue;
-				if (tomoyo_add_to_gc(TOMOYO_ID_PATH_GROUP_MEMBER,
-						     member))
-					list_del_rcu(&member->list);
-				else
-					break;
-			}
+	for (i = 0; i < TOMOYO_MAX_GROUP; i++) {
+		struct list_head *list = &tomoyo_group_list[i];
+		int id;
+		struct tomoyo_group *group;
+		switch (i) {
+		case 0:
+			id = TOMOYO_ID_PATH_GROUP;
+			break;
+		default:
+			id = TOMOYO_ID_NUMBER_GROUP;
+			break;
+		}
+		list_for_each_entry(group, list, list) {
+			if (!tomoyo_collect_member(&group->member_list, id))
+				goto unlock;
 			if (!list_empty(&group->member_list) ||
 			    atomic_read(&group->users))
 				continue;
-			if (tomoyo_add_to_gc(TOMOYO_ID_PATH_GROUP, group))
-				list_del_rcu(&group->list);
-			else
-				break;
+			if (!tomoyo_add_to_gc(TOMOYO_ID_GROUP, &group->list))
+				goto unlock;
 		}
 	}
+ unlock:
 	mutex_unlock(&tomoyo_policy_lock);
 }
 
 static void tomoyo_kfree_entry(void)
 {
-	struct tomoyo_gc_entry *p;
-	struct tomoyo_gc_entry *tmp;
+	struct tomoyo_gc *p;
+	struct tomoyo_gc *tmp;
 
 	list_for_each_entry_safe(p, tmp, &tomoyo_gc_queue, list) {
+		struct list_head *element = p->element;
 		switch (p->type) {
-		case TOMOYO_ID_DOMAIN_INITIALIZER:
-			tomoyo_del_domain_initializer(p->element);
+		case TOMOYO_ID_TRANSITION_CONTROL:
+			tomoyo_del_transition_control(element);
 			break;
-		case TOMOYO_ID_DOMAIN_KEEPER:
-			tomoyo_del_domain_keeper(p->element);
-			break;
-		case TOMOYO_ID_ALIAS:
-			tomoyo_del_alias(p->element);
+		case TOMOYO_ID_AGGREGATOR:
+			tomoyo_del_aggregator(element);
 			break;
 		case TOMOYO_ID_GLOBALLY_READABLE:
-			tomoyo_del_allow_read(p->element);
+			tomoyo_del_allow_read(element);
 			break;
 		case TOMOYO_ID_PATTERN:
-			tomoyo_del_file_pattern(p->element);
+			tomoyo_del_file_pattern(element);
 			break;
 		case TOMOYO_ID_NO_REWRITE:
-			tomoyo_del_no_rewrite(p->element);
+			tomoyo_del_no_rewrite(element);
 			break;
 		case TOMOYO_ID_MANAGER:
-			tomoyo_del_manager(p->element);
+			tomoyo_del_manager(element);
 			break;
 		case TOMOYO_ID_NAME:
-			tomoyo_del_name(p->element);
+			tomoyo_del_name(element);
 			break;
 		case TOMOYO_ID_ACL:
-			tomoyo_del_acl(p->element);
+			tomoyo_del_acl(element);
 			break;
 		case TOMOYO_ID_DOMAIN:
-			if (!tomoyo_del_domain(p->element))
+			if (!tomoyo_del_domain(element))
 				continue;
 			break;
-		case TOMOYO_ID_PATH_GROUP_MEMBER:
-			tomoyo_del_path_group_member(p->element);
-			break;
 		case TOMOYO_ID_PATH_GROUP:
-			tomoyo_del_path_group(p->element);
+			tomoyo_del_path_group(element);
 			break;
-		default:
-			printk(KERN_WARNING "Unknown type\n");
+		case TOMOYO_ID_GROUP:
+			tomoyo_del_group(element);
+			break;
+		case TOMOYO_ID_NUMBER_GROUP:
+			tomoyo_del_number_group(element);
 			break;
 		}
-		tomoyo_memory_free(p->element);
+		tomoyo_memory_free(element);
 		list_del(&p->list);
 		kfree(p);
 	}
diff --git a/security/tomoyo/group.c b/security/tomoyo/group.c
new file mode 100644
index 0000000..e94352c
--- /dev/null
+++ b/security/tomoyo/group.c
@@ -0,0 +1,130 @@
+/*
+ * security/tomoyo/group.c
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+static bool tomoyo_same_path_group(const struct tomoyo_acl_head *a,
+				const struct tomoyo_acl_head *b)
+{
+	return container_of(a, struct tomoyo_path_group, head)->member_name ==
+		container_of(b, struct tomoyo_path_group, head)->member_name;
+}
+
+static bool tomoyo_same_number_group(const struct tomoyo_acl_head *a,
+				  const struct tomoyo_acl_head *b)
+{
+	return !memcmp(&container_of(a, struct tomoyo_number_group, head)
+		       ->number,
+		       &container_of(b, struct tomoyo_number_group, head)
+		       ->number,
+		       sizeof(container_of(a, struct tomoyo_number_group, head)
+			      ->number));
+}
+
+/**
+ * tomoyo_write_group - Write "struct tomoyo_path_group"/"struct tomoyo_number_group" list.
+ *
+ * @data:      String to parse.
+ * @is_delete: True if it is a delete request.
+ * @type:      Type of this group.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+int tomoyo_write_group(char *data, const bool is_delete, const u8 type)
+{
+	struct tomoyo_group *group;
+	struct list_head *member;
+	char *w[2];
+	int error = -EINVAL;
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
+		return -EINVAL;
+	group = tomoyo_get_group(w[0], type);
+	if (!group)
+		return -ENOMEM;
+	member = &group->member_list;
+	if (type == TOMOYO_PATH_GROUP) {
+		struct tomoyo_path_group e = { };
+		e.member_name = tomoyo_get_name(w[1]);
+		if (!e.member_name) {
+			error = -ENOMEM;
+			goto out;
+		}
+		error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+					     member, tomoyo_same_path_group);
+		tomoyo_put_name(e.member_name);
+	} else if (type == TOMOYO_NUMBER_GROUP) {
+		struct tomoyo_number_group e = { };
+		if (w[1][0] == '@'
+		    || !tomoyo_parse_number_union(w[1], &e.number)
+		    || e.number.values[0] > e.number.values[1])
+			goto out;
+		error = tomoyo_update_policy(&e.head, sizeof(e), is_delete,
+					     member, tomoyo_same_number_group);
+		/*
+		 * tomoyo_put_number_union() is not needed because
+		 * w[1][0] != '@'.
+		 */
+	}
+ out:
+	tomoyo_put_group(group);
+	return error;
+}
+
+/**
+ * tomoyo_path_matches_group - Check whether the given pathname matches members of the given pathname group.
+ *
+ * @pathname:        The name of pathname.
+ * @group:           Pointer to "struct tomoyo_path_group".
+ *
+ * Returns matched member's pathname if @pathname matches pathnames in @group,
+ * NULL otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+const struct tomoyo_path_info *
+tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
+			  const struct tomoyo_group *group)
+{
+	struct tomoyo_path_group *member;
+	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+		if (member->head.is_deleted)
+			continue;
+		if (!tomoyo_path_matches_pattern(pathname, member->member_name))
+			continue;
+		return member->member_name;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_number_matches_group - Check whether the given number matches members of the given number group.
+ *
+ * @min:   Min number.
+ * @max:   Max number.
+ * @group: Pointer to "struct tomoyo_number_group".
+ *
+ * Returns true if @min and @max partially overlaps @group, false otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+bool tomoyo_number_matches_group(const unsigned long min,
+				 const unsigned long max,
+				 const struct tomoyo_group *group)
+{
+	struct tomoyo_number_group *member;
+	bool matched = false;
+	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+		if (member->head.is_deleted)
+			continue;
+		if (min > member->number.values[1] ||
+		    max < member->number.values[0])
+			continue;
+		matched = true;
+		break;
+	}
+	return matched;
+}
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
new file mode 100644
index 0000000..bbada7c
--- /dev/null
+++ b/security/tomoyo/load_policy.c
@@ -0,0 +1,81 @@
+/*
+ * security/tomoyo/load_policy.c
+ *
+ * Policy loader launcher for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include "common.h"
+
+/* path to policy loader */
+static const char *tomoyo_loader = "/sbin/tomoyo-init";
+
+/**
+ * tomoyo_policy_loader_exists - Check whether /sbin/tomoyo-init exists.
+ *
+ * Returns true if /sbin/tomoyo-init exists, false otherwise.
+ */
+static bool tomoyo_policy_loader_exists(void)
+{
+	/*
+	 * Don't activate MAC if the policy loader doesn't exist.
+	 * If the initrd includes /sbin/init but real-root-dev has not
+	 * mounted on / yet, activating MAC will block the system since
+	 * policies are not loaded yet.
+	 * Thus, let do_execve() call this function everytime.
+	 */
+	struct path path;
+
+	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
+		printk(KERN_INFO "Not activating Mandatory Access Control now "
+		       "since %s doesn't exist.\n", tomoyo_loader);
+		return false;
+	}
+	path_put(&path);
+	return true;
+}
+
+/**
+ * tomoyo_load_policy - Run external policy loader to load policy.
+ *
+ * @filename: The program about to start.
+ *
+ * This function checks whether @filename is /sbin/init , and if so
+ * invoke /sbin/tomoyo-init and wait for the termination of /sbin/tomoyo-init
+ * and then continues invocation of /sbin/init.
+ * /sbin/tomoyo-init reads policy files in /etc/tomoyo/ directory and
+ * writes to /sys/kernel/security/tomoyo/ interfaces.
+ *
+ * Returns nothing.
+ */
+void tomoyo_load_policy(const char *filename)
+{
+	char *argv[2];
+	char *envp[3];
+
+	if (tomoyo_policy_loaded)
+		return;
+	/*
+	 * Check filename is /sbin/init or /sbin/tomoyo-start.
+	 * /sbin/tomoyo-start is a dummy filename in case where /sbin/init can't
+	 * be passed.
+	 * You can create /sbin/tomoyo-start by
+	 * "ln -s /bin/true /sbin/tomoyo-start".
+	 */
+	if (strcmp(filename, "/sbin/init") &&
+	    strcmp(filename, "/sbin/tomoyo-start"))
+		return;
+	if (!tomoyo_policy_loader_exists())
+		return;
+
+	printk(KERN_INFO "Calling %s to load policy. Please wait.\n",
+	       tomoyo_loader);
+	argv[0] = (char *) tomoyo_loader;
+	argv[1] = NULL;
+	envp[0] = "HOME=/";
+	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+	envp[2] = NULL;
+	call_usermodehelper(argv[0], argv, envp, 1);
+	tomoyo_check_profile();
+}
diff --git a/security/tomoyo/memory.c b/security/tomoyo/memory.c
new file mode 100644
index 0000000..2976126
--- /dev/null
+++ b/security/tomoyo/memory.c
@@ -0,0 +1,282 @@
+/*
+ * security/tomoyo/memory.c
+ *
+ * Memory management functions for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/hash.h>
+#include <linux/slab.h>
+#include "common.h"
+
+/**
+ * tomoyo_warn_oom - Print out of memory warning message.
+ *
+ * @function: Function's name.
+ */
+void tomoyo_warn_oom(const char *function)
+{
+	/* Reduce error messages. */
+	static pid_t tomoyo_last_pid;
+	const pid_t pid = current->pid;
+	if (tomoyo_last_pid != pid) {
+		printk(KERN_WARNING "ERROR: Out of memory at %s.\n",
+		       function);
+		tomoyo_last_pid = pid;
+	}
+	if (!tomoyo_policy_loaded)
+		panic("MAC Initialization failed.\n");
+}
+
+/* Memory allocated for policy. */
+static atomic_t tomoyo_policy_memory_size;
+/* Quota for holding policy. */
+static unsigned int tomoyo_quota_for_policy;
+
+/**
+ * tomoyo_memory_ok - Check memory quota.
+ *
+ * @ptr: Pointer to allocated memory.
+ *
+ * Returns true on success, false otherwise.
+ *
+ * Returns true if @ptr is not NULL and quota not exceeded, false otherwise.
+ */
+bool tomoyo_memory_ok(void *ptr)
+{
+	size_t s = ptr ? ksize(ptr) : 0;
+	atomic_add(s, &tomoyo_policy_memory_size);
+	if (ptr && (!tomoyo_quota_for_policy ||
+		    atomic_read(&tomoyo_policy_memory_size)
+		    <= tomoyo_quota_for_policy)) {
+		memset(ptr, 0, s);
+		return true;
+	}
+	atomic_sub(s, &tomoyo_policy_memory_size);
+	tomoyo_warn_oom(__func__);
+	return false;
+}
+
+/**
+ * tomoyo_commit_ok - Check memory quota.
+ *
+ * @data:   Data to copy from.
+ * @size:   Size in byte.
+ *
+ * Returns pointer to allocated memory on success, NULL otherwise.
+ * @data is zero-cleared on success.
+ */
+void *tomoyo_commit_ok(void *data, const unsigned int size)
+{
+	void *ptr = kzalloc(size, GFP_NOFS);
+	if (tomoyo_memory_ok(ptr)) {
+		memmove(ptr, data, size);
+		memset(data, 0, size);
+		return ptr;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_memory_free - Free memory for elements.
+ *
+ * @ptr:  Pointer to allocated memory.
+ */
+void tomoyo_memory_free(void *ptr)
+{
+	atomic_sub(ksize(ptr), &tomoyo_policy_memory_size);
+	kfree(ptr);
+}
+
+/**
+ * tomoyo_get_group - Allocate memory for "struct tomoyo_path_group"/"struct tomoyo_number_group".
+ *
+ * @group_name: The name of address group.
+ * @idx:        Index number.
+ *
+ * Returns pointer to "struct tomoyo_group" on success, NULL otherwise.
+ */
+struct tomoyo_group *tomoyo_get_group(const char *group_name, const u8 idx)
+{
+	struct tomoyo_group e = { };
+	struct tomoyo_group *group = NULL;
+	bool found = false;
+	if (!tomoyo_correct_word(group_name) || idx >= TOMOYO_MAX_GROUP)
+		return NULL;
+	e.group_name = tomoyo_get_name(group_name);
+	if (!e.group_name)
+		return NULL;
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		goto out;
+	list_for_each_entry(group, &tomoyo_group_list[idx], list) {
+		if (e.group_name != group->group_name)
+			continue;
+		atomic_inc(&group->users);
+		found = true;
+		break;
+	}
+	if (!found) {
+		struct tomoyo_group *entry = tomoyo_commit_ok(&e, sizeof(e));
+		if (entry) {
+			INIT_LIST_HEAD(&entry->member_list);
+			atomic_set(&entry->users, 1);
+			list_add_tail_rcu(&entry->list,
+					  &tomoyo_group_list[idx]);
+			group = entry;
+			found = true;
+		}
+	}
+	mutex_unlock(&tomoyo_policy_lock);
+ out:
+	tomoyo_put_name(e.group_name);
+	return found ? group : NULL;
+}
+
+/*
+ * tomoyo_name_list is used for holding string data used by TOMOYO.
+ * Since same string data is likely used for multiple times (e.g.
+ * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of
+ * "const struct tomoyo_path_info *".
+ */
+struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
+
+/**
+ * tomoyo_get_name - Allocate permanent memory for string data.
+ *
+ * @name: The string to store into the permernent memory.
+ *
+ * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
+ */
+const struct tomoyo_path_info *tomoyo_get_name(const char *name)
+{
+	struct tomoyo_name *ptr;
+	unsigned int hash;
+	int len;
+	int allocated_len;
+	struct list_head *head;
+
+	if (!name)
+		return NULL;
+	len = strlen(name) + 1;
+	hash = full_name_hash((const unsigned char *) name, len - 1);
+	head = &tomoyo_name_list[hash_long(hash, TOMOYO_HASH_BITS)];
+	if (mutex_lock_interruptible(&tomoyo_policy_lock))
+		return NULL;
+	list_for_each_entry(ptr, head, list) {
+		if (hash != ptr->entry.hash || strcmp(name, ptr->entry.name))
+			continue;
+		atomic_inc(&ptr->users);
+		goto out;
+	}
+	ptr = kzalloc(sizeof(*ptr) + len, GFP_NOFS);
+	allocated_len = ptr ? ksize(ptr) : 0;
+	if (!ptr || (tomoyo_quota_for_policy &&
+		     atomic_read(&tomoyo_policy_memory_size) + allocated_len
+		     > tomoyo_quota_for_policy)) {
+		kfree(ptr);
+		ptr = NULL;
+		tomoyo_warn_oom(__func__);
+		goto out;
+	}
+	atomic_add(allocated_len, &tomoyo_policy_memory_size);
+	ptr->entry.name = ((char *) ptr) + sizeof(*ptr);
+	memmove((char *) ptr->entry.name, name, len);
+	atomic_set(&ptr->users, 1);
+	tomoyo_fill_path_info(&ptr->entry);
+	list_add_tail(&ptr->list, head);
+ out:
+	mutex_unlock(&tomoyo_policy_lock);
+	return ptr ? &ptr->entry : NULL;
+}
+
+/**
+ * tomoyo_mm_init - Initialize mm related code.
+ */
+void __init tomoyo_mm_init(void)
+{
+	int idx;
+
+	for (idx = 0; idx < TOMOYO_MAX_POLICY; idx++)
+		INIT_LIST_HEAD(&tomoyo_policy_list[idx]);
+	for (idx = 0; idx < TOMOYO_MAX_GROUP; idx++)
+		INIT_LIST_HEAD(&tomoyo_group_list[idx]);
+	for (idx = 0; idx < TOMOYO_MAX_HASH; idx++)
+		INIT_LIST_HEAD(&tomoyo_name_list[idx]);
+	INIT_LIST_HEAD(&tomoyo_kernel_domain.acl_info_list);
+	tomoyo_kernel_domain.domainname = tomoyo_get_name(TOMOYO_ROOT_NAME);
+	list_add_tail_rcu(&tomoyo_kernel_domain.list, &tomoyo_domain_list);
+	idx = tomoyo_read_lock();
+	if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain)
+		panic("Can't register tomoyo_kernel_domain");
+	{
+		/* Load built-in policy. */
+		tomoyo_write_transition_control("/sbin/hotplug", false,
+					TOMOYO_TRANSITION_CONTROL_INITIALIZE);
+		tomoyo_write_transition_control("/sbin/modprobe", false,
+					TOMOYO_TRANSITION_CONTROL_INITIALIZE);
+	}
+	tomoyo_read_unlock(idx);
+}
+
+
+/* Memory allocated for query lists. */
+unsigned int tomoyo_query_memory_size;
+/* Quota for holding query lists. */
+unsigned int tomoyo_quota_for_query;
+
+/**
+ * tomoyo_read_memory_counter - Check for memory usage in bytes.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns memory usage.
+ */
+void tomoyo_read_memory_counter(struct tomoyo_io_buffer *head)
+{
+	if (!head->r.eof) {
+		const unsigned int policy
+			= atomic_read(&tomoyo_policy_memory_size);
+		const unsigned int query = tomoyo_query_memory_size;
+		char buffer[64];
+
+		memset(buffer, 0, sizeof(buffer));
+		if (tomoyo_quota_for_policy)
+			snprintf(buffer, sizeof(buffer) - 1,
+				 "   (Quota: %10u)",
+				 tomoyo_quota_for_policy);
+		else
+			buffer[0] = '\0';
+		tomoyo_io_printf(head, "Policy:       %10u%s\n", policy,
+				 buffer);
+		if (tomoyo_quota_for_query)
+			snprintf(buffer, sizeof(buffer) - 1,
+				 "   (Quota: %10u)",
+				 tomoyo_quota_for_query);
+		else
+			buffer[0] = '\0';
+		tomoyo_io_printf(head, "Query lists:  %10u%s\n", query,
+				 buffer);
+		tomoyo_io_printf(head, "Total:        %10u\n", policy + query);
+		head->r.eof = true;
+	}
+}
+
+/**
+ * tomoyo_write_memory_quota - Set memory quota.
+ *
+ * @head: Pointer to "struct tomoyo_io_buffer".
+ *
+ * Returns 0.
+ */
+int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head)
+{
+	char *data = head->write_buf;
+	unsigned int size;
+
+	if (sscanf(data, "Policy: %u", &size) == 1)
+		tomoyo_quota_for_policy = size;
+	else if (sscanf(data, "Query lists: %u", &size) == 1)
+		tomoyo_quota_for_query = size;
+	return 0;
+}
diff --git a/security/tomoyo/mount.c b/security/tomoyo/mount.c
new file mode 100644
index 0000000..82bf8c2
--- /dev/null
+++ b/security/tomoyo/mount.c
@@ -0,0 +1,284 @@
+/*
+ * security/tomoyo/mount.c
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+/* Keywords for mount restrictions. */
+
+/* Allow to call 'mount --bind /source_dir /dest_dir' */
+#define TOMOYO_MOUNT_BIND_KEYWORD                        "--bind"
+/* Allow to call 'mount --move /old_dir    /new_dir ' */
+#define TOMOYO_MOUNT_MOVE_KEYWORD                        "--move"
+/* Allow to call 'mount -o remount /dir             ' */
+#define TOMOYO_MOUNT_REMOUNT_KEYWORD                     "--remount"
+/* Allow to call 'mount --make-unbindable /dir'       */
+#define TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD             "--make-unbindable"
+/* Allow to call 'mount --make-private /dir'          */
+#define TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD                "--make-private"
+/* Allow to call 'mount --make-slave /dir'            */
+#define TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD                  "--make-slave"
+/* Allow to call 'mount --make-shared /dir'           */
+#define TOMOYO_MOUNT_MAKE_SHARED_KEYWORD                 "--make-shared"
+
+/**
+ * tomoyo_audit_mount_log - Audit mount log.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_audit_mount_log(struct tomoyo_request_info *r)
+{
+	const char *dev = r->param.mount.dev->name;
+	const char *dir = r->param.mount.dir->name;
+	const char *type = r->param.mount.type->name;
+	const unsigned long flags = r->param.mount.flags;
+	if (r->granted)
+		return 0;
+	if (!strcmp(type, TOMOYO_MOUNT_REMOUNT_KEYWORD))
+		tomoyo_warn_log(r, "mount -o remount %s 0x%lX", dir, flags);
+	else if (!strcmp(type, TOMOYO_MOUNT_BIND_KEYWORD)
+		 || !strcmp(type, TOMOYO_MOUNT_MOVE_KEYWORD))
+		tomoyo_warn_log(r, "mount %s %s %s 0x%lX", type, dev, dir,
+				flags);
+	else if (!strcmp(type, TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD) ||
+		 !strcmp(type, TOMOYO_MOUNT_MAKE_SHARED_KEYWORD))
+		tomoyo_warn_log(r, "mount %s %s 0x%lX", type, dir, flags);
+	else
+		tomoyo_warn_log(r, "mount -t %s %s %s 0x%lX", type, dev, dir,
+				flags);
+	return tomoyo_supervisor(r,
+				 TOMOYO_KEYWORD_ALLOW_MOUNT "%s %s %s 0x%lX\n",
+				 tomoyo_pattern(r->param.mount.dev),
+				 tomoyo_pattern(r->param.mount.dir), type,
+				 flags);
+}
+
+static bool tomoyo_check_mount_acl(struct tomoyo_request_info *r,
+				   const struct tomoyo_acl_info *ptr)
+{
+	const struct tomoyo_mount_acl *acl =
+		container_of(ptr, typeof(*acl), head);
+	return tomoyo_compare_number_union(r->param.mount.flags, &acl->flags) &&
+		tomoyo_compare_name_union(r->param.mount.type, &acl->fs_type) &&
+		tomoyo_compare_name_union(r->param.mount.dir, &acl->dir_name) &&
+		(!r->param.mount.need_dev ||
+		 tomoyo_compare_name_union(r->param.mount.dev, &acl->dev_name));
+}
+
+/**
+ * tomoyo_mount_acl - Check permission for mount() operation.
+ *
+ * @r:        Pointer to "struct tomoyo_request_info".
+ * @dev_name: Name of device file.
+ * @dir:      Pointer to "struct path".
+ * @type:     Name of filesystem type.
+ * @flags:    Mount options.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+static int tomoyo_mount_acl(struct tomoyo_request_info *r, char *dev_name,
+			    struct path *dir, char *type, unsigned long flags)
+{
+	struct path path;
+	struct file_system_type *fstype = NULL;
+	const char *requested_type = NULL;
+	const char *requested_dir_name = NULL;
+	const char *requested_dev_name = NULL;
+	struct tomoyo_path_info rtype;
+	struct tomoyo_path_info rdev;
+	struct tomoyo_path_info rdir;
+	int need_dev = 0;
+	int error = -ENOMEM;
+
+	/* Get fstype. */
+	requested_type = tomoyo_encode(type);
+	if (!requested_type)
+		goto out;
+	rtype.name = requested_type;
+	tomoyo_fill_path_info(&rtype);
+
+	/* Get mount point. */
+	requested_dir_name = tomoyo_realpath_from_path(dir);
+	if (!requested_dir_name) {
+		error = -ENOMEM;
+		goto out;
+	}
+	rdir.name = requested_dir_name;
+	tomoyo_fill_path_info(&rdir);
+
+	/* Compare fs name. */
+	if (!strcmp(type, TOMOYO_MOUNT_REMOUNT_KEYWORD)) {
+		/* dev_name is ignored. */
+	} else if (!strcmp(type, TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MAKE_SHARED_KEYWORD)) {
+		/* dev_name is ignored. */
+	} else if (!strcmp(type, TOMOYO_MOUNT_BIND_KEYWORD) ||
+		   !strcmp(type, TOMOYO_MOUNT_MOVE_KEYWORD)) {
+		need_dev = -1; /* dev_name is a directory */
+	} else {
+		fstype = get_fs_type(type);
+		if (!fstype) {
+			error = -ENODEV;
+			goto out;
+		}
+		if (fstype->fs_flags & FS_REQUIRES_DEV)
+			/* dev_name is a block device file. */
+			need_dev = 1;
+	}
+	if (need_dev) {
+		/* Get mount point or device file. */
+		if (kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
+			error = -ENOENT;
+			goto out;
+		}
+		requested_dev_name = tomoyo_realpath_from_path(&path);
+		if (!requested_dev_name) {
+			error = -ENOENT;
+			goto out;
+		}
+	} else {
+		/* Map dev_name to "<NULL>" if no dev_name given. */
+		if (!dev_name)
+			dev_name = "<NULL>";
+		requested_dev_name = tomoyo_encode(dev_name);
+		if (!requested_dev_name) {
+			error = -ENOMEM;
+			goto out;
+		}
+	}
+	rdev.name = requested_dev_name;
+	tomoyo_fill_path_info(&rdev);
+	r->param_type = TOMOYO_TYPE_MOUNT_ACL;
+	r->param.mount.need_dev = need_dev;
+	r->param.mount.dev = &rdev;
+	r->param.mount.dir = &rdir;
+	r->param.mount.type = &rtype;
+	r->param.mount.flags = flags;
+	do {
+		tomoyo_check_acl(r, tomoyo_check_mount_acl);
+		error = tomoyo_audit_mount_log(r);
+	} while (error == TOMOYO_RETRY_REQUEST);
+ out:
+	kfree(requested_dev_name);
+	kfree(requested_dir_name);
+	if (fstype)
+		put_filesystem(fstype);
+	kfree(requested_type);
+	return error;
+}
+
+/**
+ * tomoyo_mount_permission - Check permission for mount() operation.
+ *
+ * @dev_name:  Name of device file.
+ * @path:      Pointer to "struct path".
+ * @type:      Name of filesystem type. May be NULL.
+ * @flags:     Mount options.
+ * @data_page: Optional data. May be NULL.
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+int tomoyo_mount_permission(char *dev_name, struct path *path, char *type,
+			    unsigned long flags, void *data_page)
+{
+	struct tomoyo_request_info r;
+	int error;
+	int idx;
+
+	if (tomoyo_init_request_info(&r, NULL, TOMOYO_MAC_FILE_MOUNT)
+	    == TOMOYO_CONFIG_DISABLED)
+		return 0;
+	if ((flags & MS_MGC_MSK) == MS_MGC_VAL)
+		flags &= ~MS_MGC_MSK;
+	if (flags & MS_REMOUNT) {
+		type = TOMOYO_MOUNT_REMOUNT_KEYWORD;
+		flags &= ~MS_REMOUNT;
+	}
+	if (flags & MS_MOVE) {
+		type = TOMOYO_MOUNT_MOVE_KEYWORD;
+		flags &= ~MS_MOVE;
+	}
+	if (flags & MS_BIND) {
+		type = TOMOYO_MOUNT_BIND_KEYWORD;
+		flags &= ~MS_BIND;
+	}
+	if (flags & MS_UNBINDABLE) {
+		type = TOMOYO_MOUNT_MAKE_UNBINDABLE_KEYWORD;
+		flags &= ~MS_UNBINDABLE;
+	}
+	if (flags & MS_PRIVATE) {
+		type = TOMOYO_MOUNT_MAKE_PRIVATE_KEYWORD;
+		flags &= ~MS_PRIVATE;
+	}
+	if (flags & MS_SLAVE) {
+		type = TOMOYO_MOUNT_MAKE_SLAVE_KEYWORD;
+		flags &= ~MS_SLAVE;
+	}
+	if (flags & MS_SHARED) {
+		type = TOMOYO_MOUNT_MAKE_SHARED_KEYWORD;
+		flags &= ~MS_SHARED;
+	}
+	if (!type)
+		type = "<NULL>";
+	idx = tomoyo_read_lock();
+	error = tomoyo_mount_acl(&r, dev_name, path, type, flags);
+	tomoyo_read_unlock(idx);
+	return error;
+}
+
+static bool tomoyo_same_mount_acl(const struct tomoyo_acl_info *a,
+				  const struct tomoyo_acl_info *b)
+{
+	const struct tomoyo_mount_acl *p1 = container_of(a, typeof(*p1), head);
+	const struct tomoyo_mount_acl *p2 = container_of(b, typeof(*p2), head);
+	return tomoyo_same_acl_head(&p1->head, &p2->head) &&
+		tomoyo_same_name_union(&p1->dev_name, &p2->dev_name) &&
+		tomoyo_same_name_union(&p1->dir_name, &p2->dir_name) &&
+		tomoyo_same_name_union(&p1->fs_type, &p2->fs_type) &&
+		tomoyo_same_number_union(&p1->flags, &p2->flags);
+}
+
+/**
+ * tomoyo_write_mount - Write "struct tomoyo_mount_acl" list.
+ *
+ * @data:      String to parse.
+ * @domain:    Pointer to "struct tomoyo_domain_info".
+ * @is_delete: True if it is a delete request.
+ *
+ * Returns 0 on success, negative value otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+int tomoyo_write_mount(char *data, struct tomoyo_domain_info *domain,
+		       const bool is_delete)
+{
+	struct tomoyo_mount_acl e = { .head.type = TOMOYO_TYPE_MOUNT_ACL };
+	int error = is_delete ? -ENOENT : -ENOMEM;
+	char *w[4];
+	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[3][0])
+		return -EINVAL;
+	if (!tomoyo_parse_name_union(w[0], &e.dev_name) ||
+	    !tomoyo_parse_name_union(w[1], &e.dir_name) ||
+	    !tomoyo_parse_name_union(w[2], &e.fs_type) ||
+	    !tomoyo_parse_number_union(w[3], &e.flags))
+		goto out;
+	error = tomoyo_update_domain(&e.head, sizeof(e), is_delete, domain,
+				     tomoyo_same_mount_acl, NULL);
+ out:
+	tomoyo_put_name_union(&e.dev_name);
+	tomoyo_put_name_union(&e.dir_name);
+	tomoyo_put_name_union(&e.fs_type);
+	tomoyo_put_number_union(&e.flags);
+	return error;
+}
diff --git a/security/tomoyo/path_group.c b/security/tomoyo/path_group.c
deleted file mode 100644
index c988041..0000000
--- a/security/tomoyo/path_group.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * security/tomoyo/path_group.c
- *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- */
-
-#include <linux/slab.h>
-#include "common.h"
-/* The list for "struct ccs_path_group". */
-LIST_HEAD(tomoyo_path_group_list);
-
-/**
- * tomoyo_get_path_group - Allocate memory for "struct tomoyo_path_group".
- *
- * @group_name: The name of pathname group.
- *
- * Returns pointer to "struct tomoyo_path_group" on success, NULL otherwise.
- */
-struct tomoyo_path_group *tomoyo_get_path_group(const char *group_name)
-{
-	struct tomoyo_path_group *entry = NULL;
-	struct tomoyo_path_group *group = NULL;
-	const struct tomoyo_path_info *saved_group_name;
-	int error = -ENOMEM;
-	if (!tomoyo_is_correct_path(group_name, 0, 0, 0) ||
-	    !group_name[0])
-		return NULL;
-	saved_group_name = tomoyo_get_name(group_name);
-	if (!saved_group_name)
-		return NULL;
-	entry = kzalloc(sizeof(*entry), GFP_NOFS);
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(group, &tomoyo_path_group_list, list) {
-		if (saved_group_name != group->group_name)
-			continue;
-		atomic_inc(&group->users);
-		error = 0;
-		break;
-	}
-	if (error && tomoyo_memory_ok(entry)) {
-		INIT_LIST_HEAD(&entry->member_list);
-		entry->group_name = saved_group_name;
-		saved_group_name = NULL;
-		atomic_set(&entry->users, 1);
-		list_add_tail_rcu(&entry->list, &tomoyo_path_group_list);
-		group = entry;
-		entry = NULL;
-		error = 0;
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(saved_group_name);
-	kfree(entry);
-	return !error ? group : NULL;
-}
-
-/**
- * tomoyo_write_path_group_policy - Write "struct tomoyo_path_group" list.
- *
- * @data:      String to parse.
- * @is_delete: True if it is a delete request.
- *
- * Returns 0 on success, nagative value otherwise.
- */
-int tomoyo_write_path_group_policy(char *data, const bool is_delete)
-{
-	struct tomoyo_path_group *group;
-	struct tomoyo_path_group_member *member;
-	struct tomoyo_path_group_member e = { };
-	int error = is_delete ? -ENOENT : -ENOMEM;
-	char *w[2];
-	if (!tomoyo_tokenize(data, w, sizeof(w)) || !w[1][0])
-		return -EINVAL;
-	group = tomoyo_get_path_group(w[0]);
-	if (!group)
-		return -ENOMEM;
-	e.member_name = tomoyo_get_name(w[1]);
-	if (!e.member_name)
-		goto out;
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		goto out;
-	list_for_each_entry_rcu(member, &group->member_list, list) {
-		if (member->member_name != e.member_name)
-			continue;
-		member->is_deleted = is_delete;
-		error = 0;
-		break;
-	}
-	if (!is_delete && error) {
-		struct tomoyo_path_group_member *entry =
-			tomoyo_commit_ok(&e, sizeof(e));
-		if (entry) {
-			list_add_tail_rcu(&entry->list, &group->member_list);
-			error = 0;
-		}
-	}
-	mutex_unlock(&tomoyo_policy_lock);
- out:
-	tomoyo_put_name(e.member_name);
-	tomoyo_put_path_group(group);
-	return error;
-}
-
-/**
- * tomoyo_read_path_group_policy - Read "struct tomoyo_path_group" list.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_read_path_group_policy(struct tomoyo_io_buffer *head)
-{
-	struct list_head *gpos;
-	struct list_head *mpos;
-	list_for_each_cookie(gpos, head->read_var1, &tomoyo_path_group_list) {
-		struct tomoyo_path_group *group;
-		group = list_entry(gpos, struct tomoyo_path_group, list);
-		list_for_each_cookie(mpos, head->read_var2,
-				     &group->member_list) {
-			struct tomoyo_path_group_member *member;
-			member = list_entry(mpos,
-					    struct tomoyo_path_group_member,
-					    list);
-			if (member->is_deleted)
-				continue;
-			if (!tomoyo_io_printf(head, TOMOYO_KEYWORD_PATH_GROUP
-					      "%s %s\n",
-					      group->group_name->name,
-					      member->member_name->name))
-				return false;
-		}
-	}
-	return true;
-}
-
-/**
- * tomoyo_path_matches_group - Check whether the given pathname matches members of the given pathname group.
- *
- * @pathname:        The name of pathname.
- * @group:           Pointer to "struct tomoyo_path_group".
- * @may_use_pattern: True if wild card is permitted.
- *
- * Returns true if @pathname matches pathnames in @group, false otherwise.
- *
- * Caller holds tomoyo_read_lock().
- */
-bool tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
-			       const struct tomoyo_path_group *group,
-			       const bool may_use_pattern)
-{
-	struct tomoyo_path_group_member *member;
-	bool matched = false;
-	list_for_each_entry_rcu(member, &group->member_list, list) {
-		if (member->is_deleted)
-			continue;
-		if (!member->member_name->is_patterned) {
-			if (tomoyo_pathcmp(pathname, member->member_name))
-				continue;
-		} else if (may_use_pattern) {
-			if (!tomoyo_path_matches_pattern(pathname,
-							 member->member_name))
-				continue;
-		} else
-			continue;
-		matched = true;
-		break;
-	}
-	return matched;
-}
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index d1b96f0..ed8ccd6 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -1,130 +1,71 @@
 /*
  * security/tomoyo/realpath.c
  *
- * Get the canonicalized absolute pathnames. The basis for TOMOYO.
+ * Pathname calculation functions for TOMOYO.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/types.h>
 #include <linux/mount.h>
 #include <linux/mnt_namespace.h>
 #include <linux/fs_struct.h>
-#include <linux/hash.h>
 #include <linux/magic.h>
 #include <linux/slab.h>
+#include <net/sock.h>
 #include "common.h"
 
 /**
  * tomoyo_encode: Convert binary string to ascii string.
  *
- * @buffer:  Buffer for ASCII string.
- * @buflen:  Size of @buffer.
- * @str:     Binary string.
+ * @str: String in binary format.
  *
- * Returns 0 on success, -ENOMEM otherwise.
+ * Returns pointer to @str in ascii format on success, NULL otherwise.
+ *
+ * This function uses kzalloc(), so caller must kfree() if this function
+ * didn't return NULL.
  */
-int tomoyo_encode(char *buffer, int buflen, const char *str)
+char *tomoyo_encode(const char *str)
 {
-	while (1) {
-		const unsigned char c = *(unsigned char *) str++;
+	int len = 0;
+	const char *p = str;
+	char *cp;
+	char *cp0;
 
-		if (tomoyo_is_valid(c)) {
-			if (--buflen <= 0)
-				break;
-			*buffer++ = (char) c;
-			if (c != '\\')
-				continue;
-			if (--buflen <= 0)
-				break;
-			*buffer++ = (char) c;
-			continue;
-		}
-		if (!c) {
-			if (--buflen <= 0)
-				break;
-			*buffer = '\0';
-			return 0;
-		}
-		buflen -= 4;
-		if (buflen <= 0)
-			break;
-		*buffer++ = '\\';
-		*buffer++ = (c >> 6) + '0';
-		*buffer++ = ((c >> 3) & 7) + '0';
-		*buffer++ = (c & 7) + '0';
+	if (!p)
+		return NULL;
+	while (*p) {
+		const unsigned char c = *p++;
+		if (c == '\\')
+			len += 2;
+		else if (c > ' ' && c < 127)
+			len++;
+		else
+			len += 4;
 	}
-	return -ENOMEM;
-}
+	len++;
+	/* Reserve space for appending "/". */
+	cp = kzalloc(len + 10, GFP_NOFS);
+	if (!cp)
+		return NULL;
+	cp0 = cp;
+	p = str;
+	while (*p) {
+		const unsigned char c = *p++;
 
-/**
- * tomoyo_realpath_from_path2 - Returns realpath(3) of the given dentry but ignores chroot'ed root.
- *
- * @path:        Pointer to "struct path".
- * @newname:     Pointer to buffer to return value in.
- * @newname_len: Size of @newname.
- *
- * Returns 0 on success, negative value otherwise.
- *
- * If dentry is a directory, trailing '/' is appended.
- * Characters out of 0x20 < c < 0x7F range are converted to
- * \ooo style octal string.
- * Character \ is converted to \\ string.
- */
-int tomoyo_realpath_from_path2(struct path *path, char *newname,
-			       int newname_len)
-{
-	int error = -ENOMEM;
-	struct dentry *dentry = path->dentry;
-	char *sp;
-
-	if (!dentry || !path->mnt || !newname || newname_len <= 2048)
-		return -EINVAL;
-	if (dentry->d_op && dentry->d_op->d_dname) {
-		/* For "socket:[\$]" and "pipe:[\$]". */
-		static const int offset = 1536;
-		sp = dentry->d_op->d_dname(dentry, newname + offset,
-					   newname_len - offset);
-	} else {
-		struct path ns_root = {.mnt = NULL, .dentry = NULL};
-
-		spin_lock(&dcache_lock);
-		/* go to whatever namespace root we are under */
-		sp = __d_path(path, &ns_root, newname, newname_len);
-		spin_unlock(&dcache_lock);
-		/* Prepend "/proc" prefix if using internal proc vfs mount. */
-		if (!IS_ERR(sp) && (path->mnt->mnt_flags & MNT_INTERNAL) &&
-		    (path->mnt->mnt_sb->s_magic == PROC_SUPER_MAGIC)) {
-			sp -= 5;
-			if (sp >= newname)
-				memcpy(sp, "/proc", 5);
-			else
-				sp = ERR_PTR(-ENOMEM);
+		if (c == '\\') {
+			*cp++ = '\\';
+			*cp++ = '\\';
+		} else if (c > ' ' && c < 127) {
+			*cp++ = c;
+		} else {
+			*cp++ = '\\';
+			*cp++ = (c >> 6) + '0';
+			*cp++ = ((c >> 3) & 7) + '0';
+			*cp++ = (c & 7) + '0';
 		}
 	}
-	if (IS_ERR(sp))
-		error = PTR_ERR(sp);
-	else
-		error = tomoyo_encode(newname, sp - newname, sp);
-	/* Append trailing '/' if dentry is a directory. */
-	if (!error && dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)
-	    && *newname) {
-		sp = newname + strlen(newname);
-		if (*(sp - 1) != '/') {
-			if (sp < newname + newname_len - 4) {
-				*sp++ = '/';
-				*sp = '\0';
-			} else {
-				error = -ENOMEM;
-			}
-		}
-	}
-	if (error)
-		printk(KERN_WARNING "tomoyo_realpath: Pathname too long.\n");
-	return error;
+	return cp0;
 }
 
 /**
@@ -134,41 +75,90 @@
  *
  * Returns the realpath of the given @path on success, NULL otherwise.
  *
+ * If dentry is a directory, trailing '/' is appended.
+ * Characters out of 0x20 < c < 0x7F range are converted to
+ * \ooo style octal string.
+ * Character \ is converted to \\ string.
+ *
  * These functions use kzalloc(), so the caller must call kfree()
  * if these functions didn't return NULL.
  */
 char *tomoyo_realpath_from_path(struct path *path)
 {
-	char *buf = kzalloc(sizeof(struct tomoyo_page_buffer), GFP_NOFS);
-
-	BUILD_BUG_ON(sizeof(struct tomoyo_page_buffer)
-		     <= TOMOYO_MAX_PATHNAME_LEN - 1);
-	if (!buf)
+	char *buf = NULL;
+	char *name = NULL;
+	unsigned int buf_len = PAGE_SIZE / 2;
+	struct dentry *dentry = path->dentry;
+	bool is_dir;
+	if (!dentry)
 		return NULL;
-	if (tomoyo_realpath_from_path2(path, buf,
-				       TOMOYO_MAX_PATHNAME_LEN - 1) == 0)
-		return buf;
-	kfree(buf);
-	return NULL;
-}
-
-/**
- * tomoyo_realpath - Get realpath of a pathname.
- *
- * @pathname: The pathname to solve.
- *
- * Returns the realpath of @pathname on success, NULL otherwise.
- */
-char *tomoyo_realpath(const char *pathname)
-{
-	struct path path;
-
-	if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
-		char *buf = tomoyo_realpath_from_path(&path);
-		path_put(&path);
-		return buf;
+	is_dir = dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode);
+	while (1) {
+		struct path ns_root = { .mnt = NULL, .dentry = NULL };
+		char *pos;
+		buf_len <<= 1;
+		kfree(buf);
+		buf = kmalloc(buf_len, GFP_NOFS);
+		if (!buf)
+			break;
+		/* Get better name for socket. */
+		if (dentry->d_sb && dentry->d_sb->s_magic == SOCKFS_MAGIC) {
+			struct inode *inode = dentry->d_inode;
+			struct socket *sock = inode ? SOCKET_I(inode) : NULL;
+			struct sock *sk = sock ? sock->sk : NULL;
+			if (sk) {
+				snprintf(buf, buf_len - 1, "socket:[family=%u:"
+					 "type=%u:protocol=%u]", sk->sk_family,
+					 sk->sk_type, sk->sk_protocol);
+			} else {
+				snprintf(buf, buf_len - 1, "socket:[unknown]");
+			}
+			name = tomoyo_encode(buf);
+			break;
+		}
+		/* For "socket:[\$]" and "pipe:[\$]". */
+		if (dentry->d_op && dentry->d_op->d_dname) {
+			pos = dentry->d_op->d_dname(dentry, buf, buf_len - 1);
+			if (IS_ERR(pos))
+				continue;
+			name = tomoyo_encode(pos);
+			break;
+		}
+		/* If we don't have a vfsmount, we can't calculate. */
+		if (!path->mnt)
+			break;
+		spin_lock(&dcache_lock);
+		/* go to whatever namespace root we are under */
+		pos = __d_path(path, &ns_root, buf, buf_len);
+		spin_unlock(&dcache_lock);
+		/* Prepend "/proc" prefix if using internal proc vfs mount. */
+		if (!IS_ERR(pos) && (path->mnt->mnt_flags & MNT_INTERNAL) &&
+		    (path->mnt->mnt_sb->s_magic == PROC_SUPER_MAGIC)) {
+			pos -= 5;
+			if (pos >= buf)
+				memcpy(pos, "/proc", 5);
+			else
+				pos = ERR_PTR(-ENOMEM);
+		}
+		if (IS_ERR(pos))
+			continue;
+		name = tomoyo_encode(pos);
+		break;
 	}
-	return NULL;
+	kfree(buf);
+	if (!name)
+		tomoyo_warn_oom(__func__);
+	else if (is_dir && *name) {
+		/* Append trailing '/' if dentry is a directory. */
+		char *pos = name + strlen(name) - 1;
+		if (*pos != '/')
+			/*
+			 * This is OK because tomoyo_encode() reserves space
+			 * for appending "/".
+			 */
+			*++pos = '/';
+	}
+	return name;
 }
 
 /**
@@ -189,191 +179,3 @@
 	}
 	return NULL;
 }
-
-/* Memory allocated for non-string data. */
-static atomic_t tomoyo_policy_memory_size;
-/* Quota for holding policy. */
-static unsigned int tomoyo_quota_for_policy;
-
-/**
- * tomoyo_memory_ok - Check memory quota.
- *
- * @ptr: Pointer to allocated memory.
- *
- * Returns true on success, false otherwise.
- *
- * Caller holds tomoyo_policy_lock.
- * Memory pointed by @ptr will be zeroed on success.
- */
-bool tomoyo_memory_ok(void *ptr)
-{
-	int allocated_len = ptr ? ksize(ptr) : 0;
-	atomic_add(allocated_len, &tomoyo_policy_memory_size);
-	if (ptr && (!tomoyo_quota_for_policy ||
-		    atomic_read(&tomoyo_policy_memory_size)
-		    <= tomoyo_quota_for_policy)) {
-		memset(ptr, 0, allocated_len);
-		return true;
-	}
-	printk(KERN_WARNING "ERROR: Out of memory "
-	       "for tomoyo_alloc_element().\n");
-	if (!tomoyo_policy_loaded)
-		panic("MAC Initialization failed.\n");
-	return false;
-}
-
-/**
- * tomoyo_commit_ok - Check memory quota.
- *
- * @data:   Data to copy from.
- * @size:   Size in byte.
- *
- * Returns pointer to allocated memory on success, NULL otherwise.
- */
-void *tomoyo_commit_ok(void *data, const unsigned int size)
-{
-	void *ptr = kzalloc(size, GFP_NOFS);
-	if (tomoyo_memory_ok(ptr)) {
-		memmove(ptr, data, size);
-		memset(data, 0, size);
-		return ptr;
-	}
-	return NULL;
-}
-
-/**
- * tomoyo_memory_free - Free memory for elements.
- *
- * @ptr:  Pointer to allocated memory.
- */
-void tomoyo_memory_free(void *ptr)
-{
-	atomic_sub(ksize(ptr), &tomoyo_policy_memory_size);
-	kfree(ptr);
-}
-
-/*
- * tomoyo_name_list is used for holding string data used by TOMOYO.
- * Since same string data is likely used for multiple times (e.g.
- * "/lib/libc-2.5.so"), TOMOYO shares string data in the form of
- * "const struct tomoyo_path_info *".
- */
-struct list_head tomoyo_name_list[TOMOYO_MAX_HASH];
-
-/**
- * tomoyo_get_name - Allocate permanent memory for string data.
- *
- * @name: The string to store into the permernent memory.
- *
- * Returns pointer to "struct tomoyo_path_info" on success, NULL otherwise.
- */
-const struct tomoyo_path_info *tomoyo_get_name(const char *name)
-{
-	struct tomoyo_name_entry *ptr;
-	unsigned int hash;
-	int len;
-	int allocated_len;
-	struct list_head *head;
-
-	if (!name)
-		return NULL;
-	len = strlen(name) + 1;
-	hash = full_name_hash((const unsigned char *) name, len - 1);
-	head = &tomoyo_name_list[hash_long(hash, TOMOYO_HASH_BITS)];
-	if (mutex_lock_interruptible(&tomoyo_policy_lock))
-		return NULL;
-	list_for_each_entry(ptr, head, list) {
-		if (hash != ptr->entry.hash || strcmp(name, ptr->entry.name))
-			continue;
-		atomic_inc(&ptr->users);
-		goto out;
-	}
-	ptr = kzalloc(sizeof(*ptr) + len, GFP_NOFS);
-	allocated_len = ptr ? ksize(ptr) : 0;
-	if (!ptr || (tomoyo_quota_for_policy &&
-		     atomic_read(&tomoyo_policy_memory_size) + allocated_len
-		     > tomoyo_quota_for_policy)) {
-		kfree(ptr);
-		printk(KERN_WARNING "ERROR: Out of memory "
-		       "for tomoyo_get_name().\n");
-		if (!tomoyo_policy_loaded)
-			panic("MAC Initialization failed.\n");
-		ptr = NULL;
-		goto out;
-	}
-	atomic_add(allocated_len, &tomoyo_policy_memory_size);
-	ptr->entry.name = ((char *) ptr) + sizeof(*ptr);
-	memmove((char *) ptr->entry.name, name, len);
-	atomic_set(&ptr->users, 1);
-	tomoyo_fill_path_info(&ptr->entry);
-	list_add_tail(&ptr->list, head);
- out:
-	mutex_unlock(&tomoyo_policy_lock);
-	return ptr ? &ptr->entry : NULL;
-}
-
-/**
- * tomoyo_realpath_init - Initialize realpath related code.
- */
-void __init tomoyo_realpath_init(void)
-{
-	int i;
-
-	BUILD_BUG_ON(TOMOYO_MAX_PATHNAME_LEN > PATH_MAX);
-	for (i = 0; i < TOMOYO_MAX_HASH; i++)
-		INIT_LIST_HEAD(&tomoyo_name_list[i]);
-	INIT_LIST_HEAD(&tomoyo_kernel_domain.acl_info_list);
-	tomoyo_kernel_domain.domainname = tomoyo_get_name(TOMOYO_ROOT_NAME);
-	/*
-	 * tomoyo_read_lock() is not needed because this function is
-	 * called before the first "delete" request.
-	 */
-	list_add_tail_rcu(&tomoyo_kernel_domain.list, &tomoyo_domain_list);
-	if (tomoyo_find_domain(TOMOYO_ROOT_NAME) != &tomoyo_kernel_domain)
-		panic("Can't register tomoyo_kernel_domain");
-}
-
-/**
- * tomoyo_read_memory_counter - Check for memory usage in bytes.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns memory usage.
- */
-int tomoyo_read_memory_counter(struct tomoyo_io_buffer *head)
-{
-	if (!head->read_eof) {
-		const unsigned int policy
-			= atomic_read(&tomoyo_policy_memory_size);
-		char buffer[64];
-
-		memset(buffer, 0, sizeof(buffer));
-		if (tomoyo_quota_for_policy)
-			snprintf(buffer, sizeof(buffer) - 1,
-				 "   (Quota: %10u)",
-				 tomoyo_quota_for_policy);
-		else
-			buffer[0] = '\0';
-		tomoyo_io_printf(head, "Policy:  %10u%s\n", policy, buffer);
-		tomoyo_io_printf(head, "Total:   %10u\n", policy);
-		head->read_eof = true;
-	}
-	return 0;
-}
-
-/**
- * tomoyo_write_memory_quota - Set memory quota.
- *
- * @head: Pointer to "struct tomoyo_io_buffer".
- *
- * Returns 0.
- */
-int tomoyo_write_memory_quota(struct tomoyo_io_buffer *head)
-{
-	char *data = head->write_buf;
-	unsigned int size;
-
-	if (sscanf(data, "Policy: %u", &size) == 1)
-		tomoyo_quota_for_policy = size;
-	return 0;
-}
diff --git a/security/tomoyo/securityfs_if.c b/security/tomoyo/securityfs_if.c
new file mode 100644
index 0000000..e43d555
--- /dev/null
+++ b/security/tomoyo/securityfs_if.c
@@ -0,0 +1,155 @@
+/*
+ * security/tomoyo/common.c
+ *
+ * Securityfs interface for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/security.h>
+#include "common.h"
+
+/**
+ * tomoyo_open - open() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @inode: Pointer to "struct inode".
+ * @file:  Pointer to "struct file".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_open(struct inode *inode, struct file *file)
+{
+	const int key = ((u8 *) file->f_path.dentry->d_inode->i_private)
+		- ((u8 *) NULL);
+	return tomoyo_open_control(key, file);
+}
+
+/**
+ * tomoyo_release - close() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @inode: Pointer to "struct inode".
+ * @file:  Pointer to "struct file".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static int tomoyo_release(struct inode *inode, struct file *file)
+{
+	return tomoyo_close_control(file);
+}
+
+/**
+ * tomoyo_poll - poll() for /proc/ccs/ interface.
+ *
+ * @file: Pointer to "struct file".
+ * @wait: Pointer to "poll_table".
+ *
+ * Returns 0 on success, negative value otherwise.
+ */
+static unsigned int tomoyo_poll(struct file *file, poll_table *wait)
+{
+	return tomoyo_poll_control(file, wait);
+}
+
+/**
+ * tomoyo_read - read() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file:  Pointer to "struct file".
+ * @buf:   Pointer to buffer.
+ * @count: Size of @buf.
+ * @ppos:  Unused.
+ *
+ * Returns bytes read on success, negative value otherwise.
+ */
+static ssize_t tomoyo_read(struct file *file, char __user *buf, size_t count,
+			   loff_t *ppos)
+{
+	return tomoyo_read_control(file, buf, count);
+}
+
+/**
+ * tomoyo_write - write() for /sys/kernel/security/tomoyo/ interface.
+ *
+ * @file:  Pointer to "struct file".
+ * @buf:   Pointer to buffer.
+ * @count: Size of @buf.
+ * @ppos:  Unused.
+ *
+ * Returns @count on success, negative value otherwise.
+ */
+static ssize_t tomoyo_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	return tomoyo_write_control(file, buf, count);
+}
+
+/*
+ * tomoyo_operations is a "struct file_operations" which is used for handling
+ * /sys/kernel/security/tomoyo/ interface.
+ *
+ * Some files under /sys/kernel/security/tomoyo/ directory accept open(O_RDWR).
+ * See tomoyo_io_buffer for internals.
+ */
+static const struct file_operations tomoyo_operations = {
+	.open    = tomoyo_open,
+	.release = tomoyo_release,
+	.poll    = tomoyo_poll,
+	.read    = tomoyo_read,
+	.write   = tomoyo_write,
+	.llseek  = noop_llseek,
+};
+
+/**
+ * tomoyo_create_entry - Create interface files under /sys/kernel/security/tomoyo/ directory.
+ *
+ * @name:   The name of the interface file.
+ * @mode:   The permission of the interface file.
+ * @parent: The parent directory.
+ * @key:    Type of interface.
+ *
+ * Returns nothing.
+ */
+static void __init tomoyo_create_entry(const char *name, const mode_t mode,
+				       struct dentry *parent, const u8 key)
+{
+	securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,
+			       &tomoyo_operations);
+}
+
+/**
+ * tomoyo_initerface_init - Initialize /sys/kernel/security/tomoyo/ interface.
+ *
+ * Returns 0.
+ */
+static int __init tomoyo_initerface_init(void)
+{
+	struct dentry *tomoyo_dir;
+
+	/* Don't create securityfs entries unless registered. */
+	if (current_cred()->security != &tomoyo_kernel_domain)
+		return 0;
+
+	tomoyo_dir = securityfs_create_dir("tomoyo", NULL);
+	tomoyo_create_entry("query",            0600, tomoyo_dir,
+			    TOMOYO_QUERY);
+	tomoyo_create_entry("domain_policy",    0600, tomoyo_dir,
+			    TOMOYO_DOMAINPOLICY);
+	tomoyo_create_entry("exception_policy", 0600, tomoyo_dir,
+			    TOMOYO_EXCEPTIONPOLICY);
+	tomoyo_create_entry("self_domain",      0400, tomoyo_dir,
+			    TOMOYO_SELFDOMAIN);
+	tomoyo_create_entry(".domain_status",   0600, tomoyo_dir,
+			    TOMOYO_DOMAIN_STATUS);
+	tomoyo_create_entry(".process_status",  0600, tomoyo_dir,
+			    TOMOYO_PROCESS_STATUS);
+	tomoyo_create_entry("meminfo",          0600, tomoyo_dir,
+			    TOMOYO_MEMINFO);
+	tomoyo_create_entry("profile",          0600, tomoyo_dir,
+			    TOMOYO_PROFILE);
+	tomoyo_create_entry("manager",          0600, tomoyo_dir,
+			    TOMOYO_MANAGER);
+	tomoyo_create_entry("version",          0400, tomoyo_dir,
+			    TOMOYO_VERSION);
+	return 0;
+}
+
+fs_initcall(tomoyo_initerface_init);
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index dedd97d..95d3f95 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -3,10 +3,7 @@
  *
  * LSM hooks for TOMOYO Linux.
  *
- * Copyright (C) 2005-2009  NTT DATA CORPORATION
- *
- * Version: 2.2.0   2009/04/01
- *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
  */
 
 #include <linux/security.h>
@@ -96,8 +93,7 @@
 	return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
 }
 
-static int tomoyo_path_truncate(struct path *path, loff_t length,
-				unsigned int time_attrs)
+static int tomoyo_path_truncate(struct path *path)
 {
 	return tomoyo_path_perm(TOMOYO_TYPE_TRUNCATE, path);
 }
@@ -112,7 +108,8 @@
 			     int mode)
 {
 	struct path path = { parent->mnt, dentry };
-	return tomoyo_path_perm(TOMOYO_TYPE_MKDIR, &path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_MKDIR, &path,
+				       mode & S_IALLUGO);
 }
 
 static int tomoyo_path_rmdir(struct path *parent, struct dentry *dentry)
@@ -133,6 +130,7 @@
 {
 	struct path path = { parent->mnt, dentry };
 	int type = TOMOYO_TYPE_CREATE;
+	const unsigned int perm = mode & S_IALLUGO;
 
 	switch (mode & S_IFMT) {
 	case S_IFCHR:
@@ -141,6 +139,12 @@
 	case S_IFBLK:
 		type = TOMOYO_TYPE_MKBLOCK;
 		break;
+	default:
+		goto no_dev;
+	}
+	return tomoyo_mkdev_perm(type, &path, perm, dev);
+ no_dev:
+	switch (mode & S_IFMT) {
 	case S_IFIFO:
 		type = TOMOYO_TYPE_MKFIFO;
 		break;
@@ -148,7 +152,7 @@
 		type = TOMOYO_TYPE_MKSOCK;
 		break;
 	}
-	return tomoyo_path_perm(type, &path);
+	return tomoyo_path_number_perm(type, &path, perm);
 }
 
 static int tomoyo_path_link(struct dentry *old_dentry, struct path *new_dir,
@@ -173,7 +177,7 @@
 			     unsigned long arg)
 {
 	if (cmd == F_SETFL && ((arg ^ file->f_flags) & O_APPEND))
-		return tomoyo_check_rewrite_permission(file);
+		return tomoyo_path_perm(TOMOYO_TYPE_REWRITE, &file->f_path);
 	return 0;
 }
 
@@ -189,23 +193,24 @@
 static int tomoyo_file_ioctl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
 {
-	return tomoyo_path_perm(TOMOYO_TYPE_IOCTL, &file->f_path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_IOCTL, &file->f_path, cmd);
 }
 
 static int tomoyo_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
 			     mode_t mode)
 {
 	struct path path = { mnt, dentry };
-	return tomoyo_path_perm(TOMOYO_TYPE_CHMOD, &path);
+	return tomoyo_path_number_perm(TOMOYO_TYPE_CHMOD, &path,
+				       mode & S_IALLUGO);
 }
 
 static int tomoyo_path_chown(struct path *path, uid_t uid, gid_t gid)
 {
 	int error = 0;
 	if (uid != (uid_t) -1)
-		error = tomoyo_path_perm(TOMOYO_TYPE_CHOWN, path);
+		error = tomoyo_path_number_perm(TOMOYO_TYPE_CHOWN, path, uid);
 	if (!error && gid != (gid_t) -1)
-		error = tomoyo_path_perm(TOMOYO_TYPE_CHGRP, path);
+		error = tomoyo_path_number_perm(TOMOYO_TYPE_CHGRP, path, gid);
 	return error;
 }
 
@@ -217,7 +222,7 @@
 static int tomoyo_sb_mount(char *dev_name, struct path *path,
 			   char *type, unsigned long flags, void *data)
 {
-	return tomoyo_path_perm(TOMOYO_TYPE_MOUNT, path);
+	return tomoyo_mount_permission(dev_name, path, type, flags, data);
 }
 
 static int tomoyo_sb_umount(struct vfsmount *mnt, int flags)
@@ -277,7 +282,7 @@
 		panic("Failure registering TOMOYO Linux");
 	printk(KERN_INFO "TOMOYO Linux initialized\n");
 	cred->security = &tomoyo_kernel_domain;
-	tomoyo_realpath_init();
+	tomoyo_mm_init();
 	return 0;
 }
 
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c
new file mode 100644
index 0000000..9bfc1ee8
--- /dev/null
+++ b/security/tomoyo/util.c
@@ -0,0 +1,963 @@
+/*
+ * security/tomoyo/util.c
+ *
+ * Utility functions for TOMOYO.
+ *
+ * Copyright (C) 2005-2010  NTT DATA CORPORATION
+ */
+
+#include <linux/slab.h>
+#include "common.h"
+
+/* Lock for protecting policy. */
+DEFINE_MUTEX(tomoyo_policy_lock);
+
+/* Has /sbin/init started? */
+bool tomoyo_policy_loaded;
+
+/**
+ * tomoyo_parse_ulong - Parse an "unsigned long" value.
+ *
+ * @result: Pointer to "unsigned long".
+ * @str:    Pointer to string to parse.
+ *
+ * Returns value type on success, 0 otherwise.
+ *
+ * The @src is updated to point the first character after the value
+ * on success.
+ */
+static u8 tomoyo_parse_ulong(unsigned long *result, char **str)
+{
+	const char *cp = *str;
+	char *ep;
+	int base = 10;
+	if (*cp == '0') {
+		char c = *(cp + 1);
+		if (c == 'x' || c == 'X') {
+			base = 16;
+			cp += 2;
+		} else if (c >= '0' && c <= '7') {
+			base = 8;
+			cp++;
+		}
+	}
+	*result = simple_strtoul(cp, &ep, base);
+	if (cp == ep)
+		return 0;
+	*str = ep;
+	switch (base) {
+	case 16:
+		return TOMOYO_VALUE_TYPE_HEXADECIMAL;
+	case 8:
+		return TOMOYO_VALUE_TYPE_OCTAL;
+	default:
+		return TOMOYO_VALUE_TYPE_DECIMAL;
+	}
+}
+
+/**
+ * tomoyo_print_ulong - Print an "unsigned long" value.
+ *
+ * @buffer:     Pointer to buffer.
+ * @buffer_len: Size of @buffer.
+ * @value:      An "unsigned long" value.
+ * @type:       Type of @value.
+ *
+ * Returns nothing.
+ */
+void tomoyo_print_ulong(char *buffer, const int buffer_len,
+			const unsigned long value, const u8 type)
+{
+	if (type == TOMOYO_VALUE_TYPE_DECIMAL)
+		snprintf(buffer, buffer_len, "%lu", value);
+	else if (type == TOMOYO_VALUE_TYPE_OCTAL)
+		snprintf(buffer, buffer_len, "0%lo", value);
+	else if (type == TOMOYO_VALUE_TYPE_HEXADECIMAL)
+		snprintf(buffer, buffer_len, "0x%lX", value);
+	else
+		snprintf(buffer, buffer_len, "type(%u)", type);
+}
+
+/**
+ * tomoyo_parse_name_union - Parse a tomoyo_name_union.
+ *
+ * @filename: Name or name group.
+ * @ptr:      Pointer to "struct tomoyo_name_union".
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_parse_name_union(const char *filename,
+			     struct tomoyo_name_union *ptr)
+{
+	if (!tomoyo_correct_word(filename))
+		return false;
+	if (filename[0] == '@') {
+		ptr->group = tomoyo_get_group(filename + 1, TOMOYO_PATH_GROUP);
+		ptr->is_group = true;
+		return ptr->group != NULL;
+	}
+	ptr->filename = tomoyo_get_name(filename);
+	ptr->is_group = false;
+	return ptr->filename != NULL;
+}
+
+/**
+ * tomoyo_parse_number_union - Parse a tomoyo_number_union.
+ *
+ * @data: Number or number range or number group.
+ * @ptr:  Pointer to "struct tomoyo_number_union".
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_parse_number_union(char *data, struct tomoyo_number_union *num)
+{
+	u8 type;
+	unsigned long v;
+	memset(num, 0, sizeof(*num));
+	if (data[0] == '@') {
+		if (!tomoyo_correct_word(data))
+			return false;
+		num->group = tomoyo_get_group(data + 1, TOMOYO_NUMBER_GROUP);
+		num->is_group = true;
+		return num->group != NULL;
+	}
+	type = tomoyo_parse_ulong(&v, &data);
+	if (!type)
+		return false;
+	num->values[0] = v;
+	num->min_type = type;
+	if (!*data) {
+		num->values[1] = v;
+		num->max_type = type;
+		return true;
+	}
+	if (*data++ != '-')
+		return false;
+	type = tomoyo_parse_ulong(&v, &data);
+	if (!type || *data)
+		return false;
+	num->values[1] = v;
+	num->max_type = type;
+	return true;
+}
+
+/**
+ * tomoyo_byte_range - Check whether the string is a \ooo style octal value.
+ *
+ * @str: Pointer to the string.
+ *
+ * Returns true if @str is a \ooo style octal value, false otherwise.
+ *
+ * TOMOYO uses \ooo style representation for 0x01 - 0x20 and 0x7F - 0xFF.
+ * This function verifies that \ooo is in valid range.
+ */
+static inline bool tomoyo_byte_range(const char *str)
+{
+	return *str >= '0' && *str++ <= '3' &&
+		*str >= '0' && *str++ <= '7' &&
+		*str >= '0' && *str <= '7';
+}
+
+/**
+ * tomoyo_alphabet_char - Check whether the character is an alphabet.
+ *
+ * @c: The character to check.
+ *
+ * Returns true if @c is an alphabet character, false otherwise.
+ */
+static inline bool tomoyo_alphabet_char(const char c)
+{
+	return (c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z');
+}
+
+/**
+ * tomoyo_make_byte - Make byte value from three octal characters.
+ *
+ * @c1: The first character.
+ * @c2: The second character.
+ * @c3: The third character.
+ *
+ * Returns byte value.
+ */
+static inline u8 tomoyo_make_byte(const u8 c1, const u8 c2, const u8 c3)
+{
+	return ((c1 - '0') << 6) + ((c2 - '0') << 3) + (c3 - '0');
+}
+
+/**
+ * tomoyo_str_starts - Check whether the given string starts with the given keyword.
+ *
+ * @src:  Pointer to pointer to the string.
+ * @find: Pointer to the keyword.
+ *
+ * Returns true if @src starts with @find, false otherwise.
+ *
+ * The @src is updated to point the first character after the @find
+ * if @src starts with @find.
+ */
+bool tomoyo_str_starts(char **src, const char *find)
+{
+	const int len = strlen(find);
+	char *tmp = *src;
+
+	if (strncmp(tmp, find, len))
+		return false;
+	tmp += len;
+	*src = tmp;
+	return true;
+}
+
+/**
+ * tomoyo_normalize_line - Format string.
+ *
+ * @buffer: The line to normalize.
+ *
+ * Leading and trailing whitespaces are removed.
+ * Multiple whitespaces are packed into single space.
+ *
+ * Returns nothing.
+ */
+void tomoyo_normalize_line(unsigned char *buffer)
+{
+	unsigned char *sp = buffer;
+	unsigned char *dp = buffer;
+	bool first = true;
+
+	while (tomoyo_invalid(*sp))
+		sp++;
+	while (*sp) {
+		if (!first)
+			*dp++ = ' ';
+		first = false;
+		while (tomoyo_valid(*sp))
+			*dp++ = *sp++;
+		while (tomoyo_invalid(*sp))
+			sp++;
+	}
+	*dp = '\0';
+}
+
+/**
+ * tomoyo_tokenize - Tokenize string.
+ *
+ * @buffer: The line to tokenize.
+ * @w:      Pointer to "char *".
+ * @size:   Sizeof @w .
+ *
+ * Returns true on success, false otherwise.
+ */
+bool tomoyo_tokenize(char *buffer, char *w[], size_t size)
+{
+	int count = size / sizeof(char *);
+	int i;
+	for (i = 0; i < count; i++)
+		w[i] = "";
+	for (i = 0; i < count; i++) {
+		char *cp = strchr(buffer, ' ');
+		if (cp)
+			*cp = '\0';
+		w[i] = buffer;
+		if (!cp)
+			break;
+		buffer = cp + 1;
+	}
+	return i < count || !*buffer;
+}
+
+/**
+ * tomoyo_correct_word2 - Validate a string.
+ *
+ * @string: The string to check. May be non-'\0'-terminated.
+ * @len:    Length of @string.
+ *
+ * Check whether the given string follows the naming rules.
+ * Returns true if @string follows the naming rules, false otherwise.
+ */
+static bool tomoyo_correct_word2(const char *string, size_t len)
+{
+	const char *const start = string;
+	bool in_repetition = false;
+	unsigned char c;
+	unsigned char d;
+	unsigned char e;
+	if (!len)
+		goto out;
+	while (len--) {
+		c = *string++;
+		if (c == '\\') {
+			if (!len--)
+				goto out;
+			c = *string++;
+			switch (c) {
+			case '\\':  /* "\\" */
+				continue;
+			case '$':   /* "\$" */
+			case '+':   /* "\+" */
+			case '?':   /* "\?" */
+			case '*':   /* "\*" */
+			case '@':   /* "\@" */
+			case 'x':   /* "\x" */
+			case 'X':   /* "\X" */
+			case 'a':   /* "\a" */
+			case 'A':   /* "\A" */
+			case '-':   /* "\-" */
+				continue;
+			case '{':   /* "/\{" */
+				if (string - 3 < start || *(string - 3) != '/')
+					break;
+				in_repetition = true;
+				continue;
+			case '}':   /* "\}/" */
+				if (*string != '/')
+					break;
+				if (!in_repetition)
+					break;
+				in_repetition = false;
+				continue;
+			case '0':   /* "\ooo" */
+			case '1':
+			case '2':
+			case '3':
+				if (!len-- || !len--)
+					break;
+				d = *string++;
+				e = *string++;
+				if (d < '0' || d > '7' || e < '0' || e > '7')
+					break;
+				c = tomoyo_make_byte(c, d, e);
+				if (tomoyo_invalid(c))
+					continue; /* pattern is not \000 */
+			}
+			goto out;
+		} else if (in_repetition && c == '/') {
+			goto out;
+		} else if (tomoyo_invalid(c)) {
+			goto out;
+		}
+	}
+	if (in_repetition)
+		goto out;
+	return true;
+ out:
+	return false;
+}
+
+/**
+ * tomoyo_correct_word - Validate a string.
+ *
+ * @string: The string to check.
+ *
+ * Check whether the given string follows the naming rules.
+ * Returns true if @string follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_word(const char *string)
+{
+	return tomoyo_correct_word2(string, strlen(string));
+}
+
+/**
+ * tomoyo_correct_path - Validate a pathname.
+ *
+ * @filename: The pathname to check.
+ *
+ * Check whether the given pathname follows the naming rules.
+ * Returns true if @filename follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_path(const char *filename)
+{
+	return *filename == '/' && tomoyo_correct_word(filename);
+}
+
+/**
+ * tomoyo_correct_domain - Check whether the given domainname follows the naming rules.
+ *
+ * @domainname: The domainname to check.
+ *
+ * Returns true if @domainname follows the naming rules, false otherwise.
+ */
+bool tomoyo_correct_domain(const unsigned char *domainname)
+{
+	if (!domainname || strncmp(domainname, TOMOYO_ROOT_NAME,
+				   TOMOYO_ROOT_NAME_LEN))
+		goto out;
+	domainname += TOMOYO_ROOT_NAME_LEN;
+	if (!*domainname)
+		return true;
+	if (*domainname++ != ' ')
+		goto out;
+	while (1) {
+		const unsigned char *cp = strchr(domainname, ' ');
+		if (!cp)
+			break;
+		if (*domainname != '/' ||
+		    !tomoyo_correct_word2(domainname, cp - domainname - 1))
+			goto out;
+		domainname = cp + 1;
+	}
+	return tomoyo_correct_path(domainname);
+ out:
+	return false;
+}
+
+/**
+ * tomoyo_domain_def - Check whether the given token can be a domainname.
+ *
+ * @buffer: The token to check.
+ *
+ * Returns true if @buffer possibly be a domainname, false otherwise.
+ */
+bool tomoyo_domain_def(const unsigned char *buffer)
+{
+	return !strncmp(buffer, TOMOYO_ROOT_NAME, TOMOYO_ROOT_NAME_LEN);
+}
+
+/**
+ * tomoyo_find_domain - Find a domain by the given name.
+ *
+ * @domainname: The domainname to find.
+ *
+ * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname)
+{
+	struct tomoyo_domain_info *domain;
+	struct tomoyo_path_info name;
+
+	name.name = domainname;
+	tomoyo_fill_path_info(&name);
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+		if (!domain->is_deleted &&
+		    !tomoyo_pathcmp(&name, domain->domainname))
+			return domain;
+	}
+	return NULL;
+}
+
+/**
+ * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token.
+ *
+ * @filename: The string to evaluate.
+ *
+ * Returns the initial length without a pattern in @filename.
+ */
+static int tomoyo_const_part_length(const char *filename)
+{
+	char c;
+	int len = 0;
+
+	if (!filename)
+		return 0;
+	while ((c = *filename++) != '\0') {
+		if (c != '\\') {
+			len++;
+			continue;
+		}
+		c = *filename++;
+		switch (c) {
+		case '\\':  /* "\\" */
+			len += 2;
+			continue;
+		case '0':   /* "\ooo" */
+		case '1':
+		case '2':
+		case '3':
+			c = *filename++;
+			if (c < '0' || c > '7')
+				break;
+			c = *filename++;
+			if (c < '0' || c > '7')
+				break;
+			len += 4;
+			continue;
+		}
+		break;
+	}
+	return len;
+}
+
+/**
+ * tomoyo_fill_path_info - Fill in "struct tomoyo_path_info" members.
+ *
+ * @ptr: Pointer to "struct tomoyo_path_info" to fill in.
+ *
+ * The caller sets "struct tomoyo_path_info"->name.
+ */
+void tomoyo_fill_path_info(struct tomoyo_path_info *ptr)
+{
+	const char *name = ptr->name;
+	const int len = strlen(name);
+
+	ptr->const_len = tomoyo_const_part_length(name);
+	ptr->is_dir = len && (name[len - 1] == '/');
+	ptr->is_patterned = (ptr->const_len < len);
+	ptr->hash = full_name_hash(name, len);
+}
+
+/**
+ * tomoyo_file_matches_pattern2 - Pattern matching without '/' character and "\-" pattern.
+ *
+ * @filename:     The start of string to check.
+ * @filename_end: The end of string to check.
+ * @pattern:      The start of pattern to compare.
+ * @pattern_end:  The end of pattern to compare.
+ *
+ * Returns true if @filename matches @pattern, false otherwise.
+ */
+static bool tomoyo_file_matches_pattern2(const char *filename,
+					 const char *filename_end,
+					 const char *pattern,
+					 const char *pattern_end)
+{
+	while (filename < filename_end && pattern < pattern_end) {
+		char c;
+		if (*pattern != '\\') {
+			if (*filename++ != *pattern++)
+				return false;
+			continue;
+		}
+		c = *filename;
+		pattern++;
+		switch (*pattern) {
+			int i;
+			int j;
+		case '?':
+			if (c == '/') {
+				return false;
+			} else if (c == '\\') {
+				if (filename[1] == '\\')
+					filename++;
+				else if (tomoyo_byte_range(filename + 1))
+					filename += 3;
+				else
+					return false;
+			}
+			break;
+		case '\\':
+			if (c != '\\')
+				return false;
+			if (*++filename != '\\')
+				return false;
+			break;
+		case '+':
+			if (!isdigit(c))
+				return false;
+			break;
+		case 'x':
+			if (!isxdigit(c))
+				return false;
+			break;
+		case 'a':
+			if (!tomoyo_alphabet_char(c))
+				return false;
+			break;
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+			if (c == '\\' && tomoyo_byte_range(filename + 1)
+			    && strncmp(filename + 1, pattern, 3) == 0) {
+				filename += 3;
+				pattern += 2;
+				break;
+			}
+			return false; /* Not matched. */
+		case '*':
+		case '@':
+			for (i = 0; i <= filename_end - filename; i++) {
+				if (tomoyo_file_matches_pattern2(
+						    filename + i, filename_end,
+						    pattern + 1, pattern_end))
+					return true;
+				c = filename[i];
+				if (c == '.' && *pattern == '@')
+					break;
+				if (c != '\\')
+					continue;
+				if (filename[i + 1] == '\\')
+					i++;
+				else if (tomoyo_byte_range(filename + i + 1))
+					i += 3;
+				else
+					break; /* Bad pattern. */
+			}
+			return false; /* Not matched. */
+		default:
+			j = 0;
+			c = *pattern;
+			if (c == '$') {
+				while (isdigit(filename[j]))
+					j++;
+			} else if (c == 'X') {
+				while (isxdigit(filename[j]))
+					j++;
+			} else if (c == 'A') {
+				while (tomoyo_alphabet_char(filename[j]))
+					j++;
+			}
+			for (i = 1; i <= j; i++) {
+				if (tomoyo_file_matches_pattern2(
+						    filename + i, filename_end,
+						    pattern + 1, pattern_end))
+					return true;
+			}
+			return false; /* Not matched or bad pattern. */
+		}
+		filename++;
+		pattern++;
+	}
+	while (*pattern == '\\' &&
+	       (*(pattern + 1) == '*' || *(pattern + 1) == '@'))
+		pattern += 2;
+	return filename == filename_end && pattern == pattern_end;
+}
+
+/**
+ * tomoyo_file_matches_pattern - Pattern matching without '/' character.
+ *
+ * @filename:     The start of string to check.
+ * @filename_end: The end of string to check.
+ * @pattern:      The start of pattern to compare.
+ * @pattern_end:  The end of pattern to compare.
+ *
+ * Returns true if @filename matches @pattern, false otherwise.
+ */
+static bool tomoyo_file_matches_pattern(const char *filename,
+					const char *filename_end,
+					const char *pattern,
+					const char *pattern_end)
+{
+	const char *pattern_start = pattern;
+	bool first = true;
+	bool result;
+
+	while (pattern < pattern_end - 1) {
+		/* Split at "\-" pattern. */
+		if (*pattern++ != '\\' || *pattern++ != '-')
+			continue;
+		result = tomoyo_file_matches_pattern2(filename,
+						      filename_end,
+						      pattern_start,
+						      pattern - 2);
+		if (first)
+			result = !result;
+		if (result)
+			return false;
+		first = false;
+		pattern_start = pattern;
+	}
+	result = tomoyo_file_matches_pattern2(filename, filename_end,
+					      pattern_start, pattern_end);
+	return first ? result : !result;
+}
+
+/**
+ * tomoyo_path_matches_pattern2 - Do pathname pattern matching.
+ *
+ * @f: The start of string to check.
+ * @p: The start of pattern to compare.
+ *
+ * Returns true if @f matches @p, false otherwise.
+ */
+static bool tomoyo_path_matches_pattern2(const char *f, const char *p)
+{
+	const char *f_delimiter;
+	const char *p_delimiter;
+
+	while (*f && *p) {
+		f_delimiter = strchr(f, '/');
+		if (!f_delimiter)
+			f_delimiter = f + strlen(f);
+		p_delimiter = strchr(p, '/');
+		if (!p_delimiter)
+			p_delimiter = p + strlen(p);
+		if (*p == '\\' && *(p + 1) == '{')
+			goto recursive;
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p,
+						 p_delimiter))
+			return false;
+		f = f_delimiter;
+		if (*f)
+			f++;
+		p = p_delimiter;
+		if (*p)
+			p++;
+	}
+	/* Ignore trailing "\*" and "\@" in @pattern. */
+	while (*p == '\\' &&
+	       (*(p + 1) == '*' || *(p + 1) == '@'))
+		p += 2;
+	return !*f && !*p;
+ recursive:
+	/*
+	 * The "\{" pattern is permitted only after '/' character.
+	 * This guarantees that below "*(p - 1)" is safe.
+	 * Also, the "\}" pattern is permitted only before '/' character
+	 * so that "\{" + "\}" pair will not break the "\-" operator.
+	 */
+	if (*(p - 1) != '/' || p_delimiter <= p + 3 || *p_delimiter != '/' ||
+	    *(p_delimiter - 1) != '}' || *(p_delimiter - 2) != '\\')
+		return false; /* Bad pattern. */
+	do {
+		/* Compare current component with pattern. */
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p + 2,
+						 p_delimiter - 2))
+			break;
+		/* Proceed to next component. */
+		f = f_delimiter;
+		if (!*f)
+			break;
+		f++;
+		/* Continue comparison. */
+		if (tomoyo_path_matches_pattern2(f, p_delimiter + 1))
+			return true;
+		f_delimiter = strchr(f, '/');
+	} while (f_delimiter);
+	return false; /* Not matched. */
+}
+
+/**
+ * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
+ *
+ * @filename: The filename to check.
+ * @pattern:  The pattern to compare.
+ *
+ * Returns true if matches, false otherwise.
+ *
+ * The following patterns are available.
+ *   \\     \ itself.
+ *   \ooo   Octal representation of a byte.
+ *   \*     Zero or more repetitions of characters other than '/'.
+ *   \@     Zero or more repetitions of characters other than '/' or '.'.
+ *   \?     1 byte character other than '/'.
+ *   \$     One or more repetitions of decimal digits.
+ *   \+     1 decimal digit.
+ *   \X     One or more repetitions of hexadecimal digits.
+ *   \x     1 hexadecimal digit.
+ *   \A     One or more repetitions of alphabet characters.
+ *   \a     1 alphabet character.
+ *
+ *   \-     Subtraction operator.
+ *
+ *   /\{dir\}/   '/' + 'One or more repetitions of dir/' (e.g. /dir/ /dir/dir/
+ *               /dir/dir/dir/ ).
+ */
+bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
+				 const struct tomoyo_path_info *pattern)
+{
+	const char *f = filename->name;
+	const char *p = pattern->name;
+	const int len = pattern->const_len;
+
+	/* If @pattern doesn't contain pattern, I can use strcmp(). */
+	if (!pattern->is_patterned)
+		return !tomoyo_pathcmp(filename, pattern);
+	/* Don't compare directory and non-directory. */
+	if (filename->is_dir != pattern->is_dir)
+		return false;
+	/* Compare the initial length without patterns. */
+	if (strncmp(f, p, len))
+		return false;
+	f += len;
+	p += len;
+	return tomoyo_path_matches_pattern2(f, p);
+}
+
+/**
+ * tomoyo_get_exe - Get tomoyo_realpath() of current process.
+ *
+ * Returns the tomoyo_realpath() of current process on success, NULL otherwise.
+ *
+ * This function uses kzalloc(), so the caller must call kfree()
+ * if this function didn't return NULL.
+ */
+const char *tomoyo_get_exe(void)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	const char *cp = NULL;
+
+	if (!mm)
+		return NULL;
+	down_read(&mm->mmap_sem);
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file) {
+			cp = tomoyo_realpath_from_path(&vma->vm_file->f_path);
+			break;
+		}
+	}
+	up_read(&mm->mmap_sem);
+	return cp;
+}
+
+/**
+ * tomoyo_get_mode - Get MAC mode.
+ *
+ * @profile: Profile number.
+ * @index:   Index number of functionality.
+ *
+ * Returns mode.
+ */
+int tomoyo_get_mode(const u8 profile, const u8 index)
+{
+	u8 mode;
+	const u8 category = TOMOYO_MAC_CATEGORY_FILE;
+	if (!tomoyo_policy_loaded)
+		return TOMOYO_CONFIG_DISABLED;
+	mode = tomoyo_profile(profile)->config[index];
+	if (mode == TOMOYO_CONFIG_USE_DEFAULT)
+		mode = tomoyo_profile(profile)->config[category];
+	if (mode == TOMOYO_CONFIG_USE_DEFAULT)
+		mode = tomoyo_profile(profile)->default_config;
+	return mode & 3;
+}
+
+/**
+ * tomoyo_init_request_info - Initialize "struct tomoyo_request_info" members.
+ *
+ * @r:      Pointer to "struct tomoyo_request_info" to initialize.
+ * @domain: Pointer to "struct tomoyo_domain_info". NULL for tomoyo_domain().
+ * @index:  Index number of functionality.
+ *
+ * Returns mode.
+ */
+int tomoyo_init_request_info(struct tomoyo_request_info *r,
+			     struct tomoyo_domain_info *domain, const u8 index)
+{
+	u8 profile;
+	memset(r, 0, sizeof(*r));
+	if (!domain)
+		domain = tomoyo_domain();
+	r->domain = domain;
+	profile = domain->profile;
+	r->profile = profile;
+	r->type = index;
+	r->mode = tomoyo_get_mode(profile, index);
+	return r->mode;
+}
+
+/**
+ * tomoyo_last_word - Get last component of a line.
+ *
+ * @line: A line.
+ *
+ * Returns the last word of a line.
+ */
+const char *tomoyo_last_word(const char *name)
+{
+	const char *cp = strrchr(name, ' ');
+	if (cp)
+		return cp + 1;
+	return name;
+}
+
+/**
+ * tomoyo_warn_log - Print warning or error message on console.
+ *
+ * @r:   Pointer to "struct tomoyo_request_info".
+ * @fmt: The printf()'s format string, followed by parameters.
+ */
+void tomoyo_warn_log(struct tomoyo_request_info *r, const char *fmt, ...)
+{
+	va_list args;
+	char *buffer;
+	const struct tomoyo_domain_info * const domain = r->domain;
+	const struct tomoyo_profile *profile = tomoyo_profile(domain->profile);
+	switch (r->mode) {
+	case TOMOYO_CONFIG_ENFORCING:
+		if (!profile->enforcing->enforcing_verbose)
+			return;
+		break;
+	case TOMOYO_CONFIG_PERMISSIVE:
+		if (!profile->permissive->permissive_verbose)
+			return;
+		break;
+	case TOMOYO_CONFIG_LEARNING:
+		if (!profile->learning->learning_verbose)
+			return;
+		break;
+	}
+	buffer = kmalloc(4096, GFP_NOFS);
+	if (!buffer)
+		return;
+	va_start(args, fmt);
+	vsnprintf(buffer, 4095, fmt, args);
+	va_end(args);
+	buffer[4095] = '\0';
+	printk(KERN_WARNING "%s: Access %s denied for %s\n",
+	       r->mode == TOMOYO_CONFIG_ENFORCING ? "ERROR" : "WARNING", buffer,
+	       tomoyo_last_word(domain->domainname->name));
+	kfree(buffer);
+}
+
+/**
+ * tomoyo_domain_quota_is_ok - Check for domain's quota.
+ *
+ * @r: Pointer to "struct tomoyo_request_info".
+ *
+ * Returns true if the domain is not exceeded quota, false otherwise.
+ *
+ * Caller holds tomoyo_read_lock().
+ */
+bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
+{
+	unsigned int count = 0;
+	struct tomoyo_domain_info *domain = r->domain;
+	struct tomoyo_acl_info *ptr;
+
+	if (r->mode != TOMOYO_CONFIG_LEARNING)
+		return false;
+	if (!domain)
+		return true;
+	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
+		if (ptr->is_deleted)
+			continue;
+		switch (ptr->type) {
+			u16 perm;
+			u8 i;
+		case TOMOYO_TYPE_PATH_ACL:
+			perm = container_of(ptr, struct tomoyo_path_acl, head)
+				->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			if (perm & (1 << TOMOYO_TYPE_READ_WRITE))
+				count -= 2;
+			break;
+		case TOMOYO_TYPE_PATH2_ACL:
+			perm = container_of(ptr, struct tomoyo_path2_acl, head)
+				->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH2_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		case TOMOYO_TYPE_PATH_NUMBER_ACL:
+			perm = container_of(ptr, struct tomoyo_path_number_acl,
+					    head)->perm;
+			for (i = 0; i < TOMOYO_MAX_PATH_NUMBER_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		case TOMOYO_TYPE_MKDEV_ACL:
+			perm = container_of(ptr, struct tomoyo_mkdev_acl,
+					    head)->perm;
+			for (i = 0; i < TOMOYO_MAX_MKDEV_OPERATION; i++)
+				if (perm & (1 << i))
+					count++;
+			break;
+		default:
+			count++;
+		}
+	}
+	if (count < tomoyo_profile(domain->profile)->learning->
+	    learning_max_entry)
+		return true;
+	if (!domain->quota_warned) {
+		domain->quota_warned = true;
+		printk(KERN_WARNING "TOMOYO-WARNING: "
+		       "Domain '%s' has so many ACLs to hold. "
+		       "Stopped learning mode.\n", domain->domainname->name);
+	}
+	return false;
+}
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 428121a..10c3a87 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -657,7 +657,7 @@
 	if (sr & AC97C_SR_CAEVT) {
 		struct snd_pcm_runtime *runtime;
 		int offset, next_period, block_size;
-		dev_info(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
+		dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
 				casr & AC97C_CSR_OVRUN   ? " OVRUN"   : "",
 				casr & AC97C_CSR_RXRDY   ? " RXRDY"   : "",
 				casr & AC97C_CSR_UNRUN   ? " UNRUN"   : "",
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f74c737..1db586a 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2578,6 +2578,9 @@
 	if (err)
 		return -err;
 
+	memset(&prev_ctl, 0, sizeof(prev_ctl));
+	prev_ctl.control_type = -1;
+
 	for (idx = 0; idx < 2000; idx++) {
 		err = hpi_mixer_get_control_by_index(
 				ss, asihpi->h_mixer,
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index e89991e..3b44134 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -941,11 +941,11 @@
 
 }
 
-static long outstream_get_space_available(struct hpi_hostbuffer_status
+static u32 outstream_get_space_available(struct hpi_hostbuffer_status
 	*status)
 {
-	return status->size_in_bytes - ((long)(status->host_index) -
-		(long)(status->dSP_index));
+	return status->size_in_bytes - (status->host_index -
+		status->dSP_index);
 }
 
 static void outstream_write(struct hpi_adapter_obj *pao,
@@ -954,7 +954,7 @@
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long space_available;
+	u32 space_available;
 
 	if (!phw->outstream_host_buffer_size[phm->obj_index]) {
 		/* there  is no BBM buffer, write via message */
@@ -1007,7 +1007,7 @@
 	}
 
 	space_available = outstream_get_space_available(status);
-	if (space_available < (long)phm->u.d.u.data.data_size) {
+	if (space_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
@@ -1018,7 +1018,7 @@
 		&& hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
 				obj_index])) {
 		u8 *p_bbm_data;
-		long l_first_write;
+		u32 l_first_write;
 		u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 		if (hpios_locked_mem_get_virt_addr(&phw->
@@ -1248,9 +1248,9 @@
 	hw_message(pao, phm, phr);
 }
 
-static long instream_get_bytes_available(struct hpi_hostbuffer_status *status)
+static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status)
 {
-	return (long)(status->dSP_index) - (long)(status->host_index);
+	return status->dSP_index - status->host_index;
 }
 
 static void instream_read(struct hpi_adapter_obj *pao,
@@ -1259,9 +1259,9 @@
 	struct hpi_hw_obj *phw = pao->priv;
 	struct bus_master_interface *interface = phw->p_interface_buffer;
 	struct hpi_hostbuffer_status *status;
-	long data_available;
+	u32 data_available;
 	u8 *p_bbm_data;
-	long l_first_read;
+	u32 l_first_read;
 	u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
 
 	if (!phw->instream_host_buffer_size[phm->obj_index]) {
@@ -1272,7 +1272,7 @@
 
 	status = &interface->instream_host_buffer_status[phm->obj_index];
 	data_available = instream_get_bytes_available(status);
-	if (data_available < (long)phm->u.d.u.data.data_size) {
+	if (data_available < phm->u.d.u.data.data_size) {
 		phr->error = HPI_ERROR_INVALID_DATASIZE;
 		return;
 	}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a3d638c..ba2098d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -784,6 +784,9 @@
 		pin->nid = nid;
 		pin->cfg = snd_hda_codec_read(codec, nid, 0,
 					      AC_VERB_GET_CONFIG_DEFAULT, 0);
+		pin->ctrl = snd_hda_codec_read(codec, nid, 0,
+					       AC_VERB_GET_PIN_WIDGET_CONTROL,
+					       0);
 	}
 	return 0;
 }
@@ -912,15 +915,38 @@
 void snd_hda_shutup_pins(struct hda_codec *codec)
 {
 	int i;
+	/* don't shut up pins when unloading the driver; otherwise it breaks
+	 * the default pin setup at the next load of the driver
+	 */
+	if (codec->bus->shutdown)
+		return;
 	for (i = 0; i < codec->init_pins.used; i++) {
 		struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
 		/* use read here for syncing after issuing each verb */
 		snd_hda_codec_read(codec, pin->nid, 0,
 				   AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
 	}
+	codec->pins_shutup = 1;
 }
 EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
 
+/* Restore the pin controls cleared previously via snd_hda_shutup_pins() */
+static void restore_shutup_pins(struct hda_codec *codec)
+{
+	int i;
+	if (!codec->pins_shutup)
+		return;
+	if (codec->bus->shutdown)
+		return;
+	for (i = 0; i < codec->init_pins.used; i++) {
+		struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
+		snd_hda_codec_write(codec, pin->nid, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    pin->ctrl);
+	}
+	codec->pins_shutup = 0;
+}
+
 static void init_hda_cache(struct hda_cache_rec *cache,
 			   unsigned int record_size);
 static void free_hda_cache(struct hda_cache_rec *cache);
@@ -2907,6 +2933,7 @@
 			    codec->afg ? codec->afg : codec->mfg,
 			    AC_PWRST_D0);
 	restore_pincfgs(codec); /* restore all current pin configs */
+	restore_shutup_pins(codec);
 	hda_exec_init_verbs(codec);
 	if (codec->patch_ops.resume)
 		codec->patch_ops.resume(codec);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 49e939e..5991d14 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -821,6 +821,7 @@
 	unsigned int pin_amp_workaround:1; /* pin out-amp takes index
 					    * (e.g. Conexant codecs)
 					    */
+	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
@@ -897,7 +898,9 @@
 /* the struct for codec->pin_configs */
 struct hda_pincfg {
 	hda_nid_t nid;
-	unsigned int cfg;
+	unsigned char ctrl;	/* current pin control value */
+	unsigned char pad;	/* reserved */
+	unsigned int cfg;	/* default configuration */
 };
 
 unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index dc79564..1df25cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1913,11 +1913,11 @@
 	if (WARN_ONCE(!azx_dev->period_bytes,
 		      "hda-intel: zero azx_dev->period_bytes"))
 		return -1; /* this shouldn't happen! */
-	if (wallclk <= azx_dev->period_wallclk &&
+	if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
 	    pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
 		/* NG - it's below the first next period boundary */
 		return bdl_pos_adj[chip->dev_index] ? 0 : -1;
-	azx_dev->start_wallclk = wallclk;
+	azx_dev->start_wallclk += wallclk;
 	return 1; /* OK, it's fine */
 }
 
@@ -2288,6 +2288,8 @@
 	SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
@@ -2296,6 +2298,7 @@
 	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
 	{}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 86067ee7..2fc5396 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -52,6 +52,10 @@
 	 */
 	struct hda_multi_out multiout;
 	unsigned int codec_type;
+
+	/* misc flags */
+	/* PD bit indicates only the update, not the current state */
+	unsigned int old_pin_detect:1;
 };
 
 
@@ -616,6 +620,9 @@
  * Unsolicited events
  */
 
+static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
+			       struct hdmi_eld *eld);
+
 static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
 	struct hdmi_spec *spec = codec->spec;
@@ -632,6 +639,12 @@
 	if (index < 0)
 		return;
 
+	if (spec->old_pin_detect) {
+		if (pind)
+			hdmi_present_sense(codec, tag, &spec->sink_eld[index]);
+		pind = spec->sink_eld[index].monitor_present;
+	}
+
 	spec->sink_eld[index].monitor_present = pind;
 	spec->sink_eld[index].eld_valid = eldv;
 
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 3c10c0b..b0652ac 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -478,6 +478,7 @@
 
 	codec->spec = spec;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP89;
+	spec->old_pin_detect = 1;
 
 	if (hdmi_parse_codec(codec) < 0) {
 		codec->spec = NULL;
@@ -508,6 +509,7 @@
 	spec->multiout.max_channels = 8;
 	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
+	spec->old_pin_detect = 1;
 
 	codec->patch_ops = nvhdmi_patch_ops_8ch_7x;
 
@@ -528,6 +530,7 @@
 	spec->multiout.max_channels = 2;
 	spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x;
 	spec->codec_type = HDA_CODEC_NVIDIA_MCP7X;
+	spec->old_pin_detect = 1;
 
 	codec->patch_ops = nvhdmi_patch_ops_2ch;
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 17d4548..596ea2f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1267,6 +1267,8 @@
 	unsigned nid = 0;
 	struct alc_spec *spec = codec->spec;
 
+	spec->cdefine.enable_pcbeep = 1; /* assume always enabled */
+
 	ass = codec->subsystem_id & 0xffff;
 	if (ass != codec->bus->pci->subsystem_device && (ass & 1))
 		goto do_sku;
@@ -2547,7 +2549,7 @@
 static int alc_build_controls(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	struct snd_kcontrol *kctl;
+	struct snd_kcontrol *kctl = NULL;
 	struct snd_kcontrol_new *knew;
 	int i, j, err;
 	unsigned int u;
@@ -2619,16 +2621,18 @@
 	}
 
 	/* assign Capture Source enums to NID */
-	kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
-	if (!kctl)
-		kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
-	for (i = 0; kctl && i < kctl->count; i++) {
-		hda_nid_t *nids = spec->capsrc_nids;
-		if (!nids)
-			nids = spec->adc_nids;
-		err = snd_hda_add_nid(codec, kctl, i, nids[i]);
-		if (err < 0)
-			return err;
+	if (spec->capsrc_nids || spec->adc_nids) {
+		kctl = snd_hda_find_mixer_ctl(codec, "Capture Source");
+		if (!kctl)
+			kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
+		for (i = 0; kctl && i < kctl->count; i++) {
+			hda_nid_t *nids = spec->capsrc_nids;
+			if (!nids)
+				nids = spec->adc_nids;
+			err = snd_hda_add_nid(codec, kctl, i, nids[i]);
+			if (err < 0)
+				return err;
+		}
 	}
 	if (spec->cap_mixer) {
 		const char *kname = kctl ? kctl->id.name : NULL;
@@ -5176,8 +5180,24 @@
 #ifdef CONFIG_SND_HDA_INPUT_BEEP
 #define set_beep_amp(spec, nid, idx, dir) \
 	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
+
+static struct snd_pci_quirk beep_white_list[] = {
+	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
+	{}
+};
+
+static inline int has_cdefine_beep(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	const struct snd_pci_quirk *q;
+	q = snd_pci_quirk_lookup(codec->bus->pci, beep_white_list);
+	if (q)
+		return q->value;
+	return spec->cdefine.enable_pcbeep;
+}
 #else
 #define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#define has_cdefine_beep(codec)		0
 #endif
 
 /*
@@ -6948,7 +6968,7 @@
 	.num_items = 3,
 	.items = {
 		{ "Mic", 0x1 },
-		{ "Line", 0x2 },
+		{ "Line", 0x7 },
 		{ "CD", 0x4 },
 	},
 };
@@ -7469,8 +7489,8 @@
 	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
 	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
+	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x00, HDA_INPUT),
@@ -7853,10 +7873,9 @@
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0x1)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x7)},
+	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x4)},
 	{ }
 };
 
@@ -9476,11 +9495,16 @@
 	SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+	SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
+	SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_ASUS_A7M),
+	SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3),
+	SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21),
 	SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
 	SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
 	SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC885_IMAC91),
 	SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
+	SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC885_MB5),
 	/* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
 	 * so apparently no perfect solution yet
 	 */
@@ -10558,10 +10582,12 @@
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC882_AUTO)
@@ -10611,7 +10637,7 @@
 
 	set_capture_mixer(codec);
 
-	if (spec->cdefine.enable_pcbeep)
+	if (has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	if (board_config == ALC882_AUTO)
@@ -12427,7 +12453,7 @@
 		}
 	}
 
-	if (!spec->no_analog) {
+	if (!spec->no_analog && has_cdefine_beep(codec)) {
 		err = snd_hda_attach_beep_device(codec, 0x1);
 		if (err < 0) {
 			alc_free(codec);
@@ -12478,7 +12504,7 @@
 	}
 	if (!spec->cap_mixer && !spec->no_analog)
 		set_capture_mixer(codec);
-	if (!spec->no_analog && spec->cdefine.enable_pcbeep)
+	if (!spec->no_analog && has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
@@ -14450,10 +14476,12 @@
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC269_AUTO)
@@ -14486,7 +14514,7 @@
 
 	if (!spec->cap_mixer)
 		set_capture_mixer(codec);
-	if (spec->cdefine.enable_pcbeep)
+	if (has_cdefine_beep(codec))
 		set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
 
 	if (board_config == ALC269_AUTO)
@@ -18683,10 +18711,12 @@
 		}
 	}
 
-	err = snd_hda_attach_beep_device(codec, 0x1);
-	if (err < 0) {
-		alc_free(codec);
-		return err;
+	if (has_cdefine_beep(codec)) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
 	}
 
 	if (board_config != ALC662_AUTO)
@@ -18708,7 +18738,7 @@
 	if (!spec->cap_mixer)
 		set_capture_mixer(codec);
 
-	if (spec->cdefine.enable_pcbeep) {
+	if (has_cdefine_beep(codec)) {
 		switch (codec->vendor_id) {
 		case 0x10ec0662:
 			set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index 495be6e..24454c9 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -300,7 +300,7 @@
 };
 EXPORT_SYMBOL(au1xpsc_i2s_dai);
 
-static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev)
+static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
 {
 	struct resource *r;
 	unsigned long sel;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 31ac553..5da30eb 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,8 +83,8 @@
 
 config SND_SOC_WM_HUBS
 	tristate
-	default y if SND_SOC_WM8993=y
-	default m if SND_SOC_WM8993=m
+	default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
+	default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
 
 config SND_SOC_AC97_CODEC
 	tristate
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index 1072621..9d1df262 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -127,6 +127,8 @@
 		goto err_codec;
 	}
 
+	return 0;
+
 err_codec:
 	snd_soc_unregister_codec(codec);
 err:
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 7e4a627..4e212ed 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -94,7 +94,6 @@
 
 static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
 SND_SOC_DAPM_INPUT("AUX"),
-SND_SOC_DAPM_INPUT("AUX"),
 
 SND_SOC_DAPM_INPUT("AIN1"),
 SND_SOC_DAPM_INPUT("AIN2"),
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 0417dae..19ad590 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -885,7 +885,6 @@
 	ret = snd_soc_register_dai(&wm8988_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
 		goto err_codec;
 	}
 
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 79f0f4a..d395509 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -612,7 +612,6 @@
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
 				((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
 	}
 
 	if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -623,7 +622,6 @@
 								NUMDMA_MASK);
 		mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
 				((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
 	}
 }
 
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 22208b3..e1ec6d9 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -73,7 +73,7 @@
 };
 
 /* Utility for retrieving psc_dma_stream structure from a substream */
-inline struct psc_dma_stream *
+static inline struct psc_dma_stream *
 to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
 {
 	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index eba9b9d..252defe 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -13,9 +13,18 @@
 
 config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
-	depends on SND_IMX_SOC && EXPERIMENTAL
+	depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
 	select SND_MXC_SOC_SSI
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
+
+config SND_SOC_PHYCORE_AC97
+	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+	depends on MACH_PCM043 || MACH_PCA100
+	select SND_MXC_SOC_SSI
+	select SND_SOC_WM9712
+	help
+	  Say Y if you want to add support for SoC audio on Phytec phyCORE
+	  and phyCARD boards in AC97 mode
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 1941a35..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -328,38 +328,6 @@
 	.codec_dev = &soc_codec_dev_wm8750,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8750 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8750_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-		(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *spitz_snd_device;
 
 static int __init spitz_init(void)
@@ -369,10 +337,6 @@
 	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
 		return -ENODEV;
 
-	ret = wm8750_i2c_setup();
-	if (ret != 0)
-		return ret;
-
 	spitz_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!spitz_snd_device)
 		return -ENOMEM;
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3396a0d..ec4acac 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -683,20 +683,15 @@
 
 	/* clock inversion (CKG2) */
 	data = 0;
-	switch (SH_FSI_INVERSION_MASK & flags) {
-	case SH_FSI_LRM_INV:
-		data = 1 << 12;
-		break;
-	case SH_FSI_BRM_INV:
-		data = 1 << 8;
-		break;
-	case SH_FSI_LRS_INV:
-		data = 1 << 4;
-		break;
-	case SH_FSI_BRS_INV:
-		data = 1 << 0;
-		break;
-	}
+	if (SH_FSI_LRM_INV & flags)
+		data |= 1 << 12;
+	if (SH_FSI_BRM_INV & flags)
+		data |= 1 << 8;
+	if (SH_FSI_LRS_INV & flags)
+		data |= 1 << 4;
+	if (SH_FSI_BRS_INV & flags)
+		data |= 1 << 0;
+
 	fsi_reg_write(fsi, CKG2, data);
 
 	/* do fmt, di fmt */
@@ -726,15 +721,15 @@
 		break;
 	case SH_FSI_FMT_TDM:
 		msg = "TDM";
-		data = CR_FMT(CR_TDM) | (fsi->chan - 1);
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+		data = CR_FMT(CR_TDM) | (fsi->chan - 1);
 		break;
 	case SH_FSI_FMT_TDM_DELAY:
 		msg = "TDM Delay";
-		data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+		data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
 		break;
 	default:
 		dev_err(dai->dev, "unknown format.\n");
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 4c7b051..1bc56b2 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -69,7 +69,6 @@
 	int				irq;
 	int				period;
 	unsigned long			bitrate;
-	struct clk			*bitclk;
 	struct ssc_device		*ssc;
 	struct spi_device		*spi;
 	u8				spi_wbuffer[2];
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index e7ac7f4..1e362bf 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -11,7 +11,8 @@
 			endpoint.o \
 			urb.o \
 			pcm.o \
-			helper.o
+			helper.o \
+			clock.o
 
 snd-usbmidi-lib-objs := midi.o
 
diff --git a/sound/usb/card.c b/sound/usb/card.c
index da1346b..7a8ac1d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -236,7 +236,6 @@
 	}
 
 	case UAC_VERSION_2: {
-		struct uac_clock_source_descriptor *cs;
 		struct usb_interface_assoc_descriptor *assoc =
 			usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
 
@@ -245,21 +244,6 @@
 			return -EINVAL;
 		}
 
-		/* FIXME: for now, we expect there is at least one clock source
-		 * descriptor and we always take the first one.
-		 * We should properly support devices with multiple clock sources,
-		 * clock selectors and sample rate conversion units. */
-
-		cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
-						NULL, UAC2_CLOCK_SOURCE);
-
-		if (!cs) {
-			snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
-			return -EINVAL;
-		}
-
-		chip->clock_id = cs->bClockID;
-
 		for (i = 0; i < assoc->bInterfaceCount; i++) {
 			int intf = assoc->bFirstInterface + i;
 
@@ -481,6 +465,8 @@
 			goto __error;
 	}
 
+	chip->ctrl_intf = alts;
+
 	if (err > 0) {
 		/* create normal USB audio interfaces */
 		if (snd_usb_create_streams(chip, ifnum) < 0 ||
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ed92420..1febf2f 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -25,6 +25,7 @@
 	unsigned int rate_min, rate_max;	/* min/max rates */
 	unsigned int nr_rates;		/* number of rate table entries */
 	unsigned int *rate_table;	/* rate table */
+	unsigned char clock;		/* associated clock */
 };
 
 struct snd_usb_substream;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
new file mode 100644
index 0000000..b585511
--- /dev/null
+++ b/sound/usb/clock.c
@@ -0,0 +1,315 @@
+/*
+ *   Clock domain and sample rate management functions
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "midi.h"
+#include "mixer.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "helper.h"
+#include "debug.h"
+#include "pcm.h"
+#include "urb.h"
+#include "format.h"
+
+static struct uac_clock_source_descriptor *
+	snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
+				  int clock_id)
+{
+	struct uac_clock_source_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_SOURCE))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static struct uac_clock_selector_descriptor *
+	snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
+				    int clock_id)
+{
+	struct uac_clock_selector_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_SELECTOR))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static struct uac_clock_multiplier_descriptor *
+	snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
+				      int clock_id)
+{
+	struct uac_clock_multiplier_descriptor *cs = NULL;
+
+	while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+					     ctrl_iface->extralen,
+					     cs, UAC2_CLOCK_MULTIPLIER))) {
+		if (cs->bClockID == clock_id)
+			return cs;
+	}
+
+	return NULL;
+}
+
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+{
+	unsigned char buf;
+	int ret;
+
+	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+			      UAC2_CS_CUR,
+			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+			      UAC2_CX_CLOCK_SELECTOR << 8,
+			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
+			      &buf, sizeof(buf), 1000);
+
+	if (ret < 0)
+		return ret;
+
+	return buf;
+}
+
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+{
+	int err;
+	unsigned char data;
+	struct usb_device *dev = chip->dev;
+
+	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			      UAC2_CS_CONTROL_CLOCK_VALID << 8,
+			      snd_usb_ctrl_intf(chip) | (source_id << 8),
+			      &data, sizeof(data), 1000);
+
+	if (err < 0) {
+		snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+			   __func__, source_id);
+		return err;
+	}
+
+	return !!data;
+}
+
+/* Try to find the clock source ID of a given clock entity */
+
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+				   struct usb_host_interface *host_iface,
+				   int entity_id, unsigned long *visited)
+{
+	struct uac_clock_source_descriptor *source;
+	struct uac_clock_selector_descriptor *selector;
+	struct uac_clock_multiplier_descriptor *multiplier;
+
+	entity_id &= 0xff;
+
+	if (test_and_set_bit(entity_id, visited)) {
+		snd_printk(KERN_WARNING
+			"%s(): recursive clock topology detected, id %d.\n",
+			__func__, entity_id);
+		return -EINVAL;
+	}
+
+	/* first, see if the ID we're looking for is a clock source already */
+	source = snd_usb_find_clock_source(host_iface, entity_id);
+	if (source)
+		return source->bClockID;
+
+	selector = snd_usb_find_clock_selector(host_iface, entity_id);
+	if (selector) {
+		int ret;
+
+		/* the entity ID we are looking for is a selector.
+		 * find out what it currently selects */
+		ret = uac_clock_selector_get_val(chip, selector->bClockID);
+		if (ret < 0)
+			return ret;
+
+		if (ret > selector->bNrInPins || ret < 1) {
+			printk(KERN_ERR
+				"%s(): selector reported illegal value, id %d, ret %d\n",
+				__func__, selector->bClockID, ret);
+
+			return -EINVAL;
+		}
+
+		return __uac_clock_find_source(chip, host_iface,
+					       selector->baCSourceID[ret-1],
+					       visited);
+	}
+
+	/* FIXME: multipliers only act as pass-thru element for now */
+	multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+	if (multiplier)
+		return __uac_clock_find_source(chip, host_iface,
+					       multiplier->bCSourceID, visited);
+
+	return -EINVAL;
+}
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+			      struct usb_host_interface *host_iface,
+			      int entity_id)
+{
+	DECLARE_BITMAP(visited, 256);
+	memset(visited, 0, sizeof(visited));
+	return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+}
+
+static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
+			      struct usb_host_interface *alts,
+			      struct audioformat *fmt, int rate)
+{
+	struct usb_device *dev = chip->dev;
+	unsigned int ep;
+	unsigned char data[3];
+	int err, crate;
+
+	ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+	/* if endpoint doesn't have sampling rate control, bail out */
+	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
+		snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
+				   dev->devnum, iface, fmt->altsetting);
+		return 0;
+	}
+
+	data[0] = rate;
+	data[1] = rate >> 8;
+	data[2] = rate >> 16;
+	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
+			   dev->devnum, iface, fmt->altsetting, rate, ep);
+		return err;
+	}
+
+	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
+				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
+			   dev->devnum, iface, fmt->altsetting, ep);
+		return 0; /* some devices don't support reading */
+	}
+
+	crate = data[0] | (data[1] << 8) | (data[2] << 16);
+	if (crate != rate) {
+		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+		// runtime->rate = crate;
+	}
+
+	return 0;
+}
+
+static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+			      struct usb_host_interface *alts,
+			      struct audioformat *fmt, int rate)
+{
+	struct usb_device *dev = chip->dev;
+	unsigned char data[4];
+	int err, crate;
+	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+
+	if (clock < 0)
+		return clock;
+
+	if (!uac_clock_source_is_valid(chip, clock)) {
+		snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
+			   dev->devnum, iface, fmt->altsetting, clock);
+		return -ENXIO;
+	}
+
+	data[0] = rate;
+	data[1] = rate >> 8;
+	data[2] = rate >> 16;
+	data[3] = rate >> 24;
+	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
+			   dev->devnum, iface, fmt->altsetting, rate);
+		return err;
+	}
+
+	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+				   UAC2_CS_CONTROL_SAM_FREQ << 8,
+				   snd_usb_ctrl_intf(chip) | (clock << 8),
+				   data, sizeof(data), 1000)) < 0) {
+		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+			   dev->devnum, iface, fmt->altsetting);
+		return err;
+	}
+
+	crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+	if (crate != rate)
+		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+
+	return 0;
+}
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+			     struct usb_host_interface *alts,
+			     struct audioformat *fmt, int rate)
+{
+	struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+
+	switch (altsd->bInterfaceProtocol) {
+	case UAC_VERSION_1:
+		return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+
+	case UAC_VERSION_2:
+		return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+	}
+
+	return -EINVAL;
+}
+
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
new file mode 100644
index 0000000..beb2536
--- /dev/null
+++ b/sound/usb/clock.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_CLOCK_H
+#define __USBAUDIO_CLOCK_H
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+			     struct usb_host_interface *alts,
+			     struct audioformat *fmt, int rate);
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+			      struct usb_host_interface *host_iface,
+			      int entity_id);
+
+#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 28ee1ce..6f6596c 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -190,6 +190,38 @@
 	return attributes;
 }
 
+static struct uac2_input_terminal_descriptor *
+	snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+					       int terminal_id)
+{
+	struct uac2_input_terminal_descriptor *term = NULL;
+
+	while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+					       ctrl_iface->extralen,
+					       term, UAC_INPUT_TERMINAL))) {
+		if (term->bTerminalID == terminal_id)
+			return term;
+	}
+
+	return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+	snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+						int terminal_id)
+{
+	struct uac2_output_terminal_descriptor *term = NULL;
+
+	while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+					       ctrl_iface->extralen,
+					       term, UAC_OUTPUT_TERMINAL))) {
+		if (term->bTerminalID == terminal_id)
+			return term;
+	}
+
+	return NULL;
+}
+
 int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 {
 	struct usb_device *dev;
@@ -199,7 +231,7 @@
 	int i, altno, err, stream;
 	int format = 0, num_channels = 0;
 	struct audioformat *fp = NULL;
-	int num, protocol;
+	int num, protocol, clock = 0;
 	struct uac_format_type_i_continuous_descriptor *fmt;
 
 	dev = chip->dev;
@@ -263,6 +295,8 @@
 		}
 
 		case UAC_VERSION_2: {
+			struct uac2_input_terminal_descriptor *input_term;
+			struct uac2_output_terminal_descriptor *output_term;
 			struct uac_as_header_descriptor_v2 *as =
 				snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
 
@@ -281,7 +315,25 @@
 			num_channels = as->bNrChannels;
 			format = le32_to_cpu(as->bmFormats);
 
-			break;
+			/* lookup the terminal associated to this interface
+			 * to extract the clock */
+			input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+									    as->bTerminalLink);
+			if (input_term) {
+				clock = input_term->bCSourceID;
+				break;
+			}
+
+			output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+									      as->bTerminalLink);
+			if (output_term) {
+				clock = output_term->bCSourceID;
+				break;
+			}
+
+			snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+				   dev->devnum, iface_no, altno, as->bTerminalLink);
+			continue;
 		}
 
 		default:
@@ -338,6 +390,7 @@
 			fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
 					* (fp->maxpacksize & 0x7ff);
 		fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+		fp->clock = clock;
 
 		/* some quirks for attributes here */
 
@@ -374,6 +427,7 @@
 		if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) {
 			kfree(fp->rate_table);
 			kfree(fp);
+			fp = NULL;
 			continue;
 		}
 
diff --git a/sound/usb/format.c b/sound/usb/format.c
index fe29d61..30364ab 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -29,6 +29,7 @@
 #include "quirks.h"
 #include "helper.h"
 #include "debug.h"
+#include "clock.h"
 
 /*
  * parse the audio format type I descriptor
@@ -205,6 +206,60 @@
 }
 
 /*
+ * Helper function to walk the array of sample rate triplets reported by
+ * the device. The problem is that we need to parse whole array first to
+ * get to know how many sample rates we have to expect.
+ * Then fp->rate_table can be allocated and filled.
+ */
+static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
+					const unsigned char *data)
+{
+	int i, nr_rates = 0;
+
+	fp->rates = fp->rate_min = fp->rate_max = 0;
+
+	for (i = 0; i < nr_triplets; i++) {
+		int min = combine_quad(&data[2 + 12 * i]);
+		int max = combine_quad(&data[6 + 12 * i]);
+		int res = combine_quad(&data[10 + 12 * i]);
+		int rate;
+
+		if ((max < 0) || (min < 0) || (res < 0) || (max < min))
+			continue;
+
+		/*
+		 * for ranges with res == 1, we announce a continuous sample
+		 * rate range, and this function should return 0 for no further
+		 * parsing.
+		 */
+		if (res == 1) {
+			fp->rate_min = min;
+			fp->rate_max = max;
+			fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
+			return 0;
+		}
+
+		for (rate = min; rate <= max; rate += res) {
+			if (fp->rate_table)
+				fp->rate_table[nr_rates] = rate;
+			if (!fp->rate_min || rate < fp->rate_min)
+				fp->rate_min = rate;
+			if (!fp->rate_max || rate > fp->rate_max)
+				fp->rate_max = rate;
+			fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+
+			nr_rates++;
+
+			/* avoid endless loop */
+			if (res == 0)
+				break;
+		}
+	}
+
+	return nr_rates;
+}
+
+/*
  * parse the format descriptor and stores the possible sample rates
  * on the audioformat table (audio class v2).
  */
@@ -214,21 +269,30 @@
 {
 	struct usb_device *dev = chip->dev;
 	unsigned char tmp[2], *data;
-	int i, nr_rates, data_size, ret = 0;
+	int nr_triplets, data_size, ret = 0;
+	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
+
+	if (clock < 0) {
+		snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
+				__func__, clock);
+		goto err;
+	}
 
 	/* get the number of sample rates first by only fetching 2 bytes */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
 			      tmp, sizeof(tmp), 1000);
 
 	if (ret < 0) {
-		snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+		snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+				__func__, clock);
 		goto err;
 	}
 
-	nr_rates = (tmp[1] << 8) | tmp[0];
-	data_size = 2 + 12 * nr_rates;
+	nr_triplets = (tmp[1] << 8) | tmp[0];
+	data_size = 2 + 12 * nr_triplets;
 	data = kzalloc(data_size, GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -237,36 +301,40 @@
 
 	/* now get the full information */
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
-			       USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			       UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-			       data, data_size, 1000);
+			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      data, data_size, 1000);
 
 	if (ret < 0) {
-		snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+		snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+				__func__, clock);
 		ret = -EINVAL;
 		goto err_free;
 	}
 
-	fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
+	/* Call the triplet parser, and make sure fp->rate_table is NULL.
+	 * We just use the return value to know how many sample rates we
+	 * will have to deal with. */
+	kfree(fp->rate_table);
+	fp->rate_table = NULL;
+	fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
+
+	if (fp->nr_rates == 0) {
+		/* SNDRV_PCM_RATE_CONTINUOUS */
+		ret = 0;
+		goto err_free;
+	}
+
+	fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
 	if (!fp->rate_table) {
 		ret = -ENOMEM;
 		goto err_free;
 	}
 
-	fp->nr_rates = 0;
-	fp->rate_min = fp->rate_max = 0;
-
-	for (i = 0; i < nr_rates; i++) {
-		int rate = combine_quad(&data[2 + 12 * i]);
-
-		fp->rate_table[fp->nr_rates] = rate;
-		if (!fp->rate_min || rate < fp->rate_min)
-			fp->rate_min = rate;
-		if (!fp->rate_max || rate > fp->rate_max)
-			fp->rate_max = rate;
-		fp->rates |= snd_pcm_rate_to_rate_bit(rate);
-		fp->nr_rates++;
-	}
+	/* Call the triplet parser again, but this time, fp->rate_table is
+	 * allocated, so the rates will be stored */
+	parse_uac2_sample_rate_range(fp, nr_triplets, data);
 
 err_free:
 	kfree(data);
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index a6b0e51..09bd943 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -28,5 +28,9 @@
 #define snd_usb_get_speed(dev) ((dev)->speed)
 #endif
 
+static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+{
+	return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+}
 
 #endif /* __USBAUDIO_HELPER_H */
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 03ce971..736d134 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -78,39 +78,6 @@
 	USB_MIXER_U16,
 };
 
-enum {
-	USB_PROC_UPDOWN = 1,
-	USB_PROC_UPDOWN_SWITCH = 1,
-	USB_PROC_UPDOWN_MODE_SEL = 2,
-
-	USB_PROC_PROLOGIC = 2,
-	USB_PROC_PROLOGIC_SWITCH = 1,
-	USB_PROC_PROLOGIC_MODE_SEL = 2,
-
-	USB_PROC_3DENH = 3,
-	USB_PROC_3DENH_SWITCH = 1,
-	USB_PROC_3DENH_SPACE = 2,
-
-	USB_PROC_REVERB = 4,
-	USB_PROC_REVERB_SWITCH = 1,
-	USB_PROC_REVERB_LEVEL = 2,
-	USB_PROC_REVERB_TIME = 3,
-	USB_PROC_REVERB_DELAY = 4,
-
-	USB_PROC_CHORUS = 5,
-	USB_PROC_CHORUS_SWITCH = 1,
-	USB_PROC_CHORUS_LEVEL = 2,
-	USB_PROC_CHORUS_RATE = 3,
-	USB_PROC_CHORUS_DEPTH = 4,
-
-	USB_PROC_DCR = 6,
-	USB_PROC_DCR_SWITCH = 1,
-	USB_PROC_DCR_RATIO = 2,
-	USB_PROC_DCR_MAX_AMP = 3,
-	USB_PROC_DCR_THRESHOLD = 4,
-	USB_PROC_DCR_ATTACK = 5,
-	USB_PROC_DCR_RELEASE = 6,
-};
 
 /*E-mu 0202(0404) eXtension Unit(XU) control*/
 enum {
@@ -198,22 +165,24 @@
 
 /*
  * find an audio control unit with the given unit id
- * this doesn't return any clock related units, so they need to be handled elsewhere
  */
 static void *find_audio_control_unit(struct mixer_build *state, unsigned char unit)
 {
-	unsigned char *p;
+	/* we just parse the header */
+	struct uac_feature_unit_descriptor *hdr = NULL;
 
-	p = NULL;
-	while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
-				      USB_DT_CS_INTERFACE)) != NULL) {
-		if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC2_EXTENSION_UNIT_V2 && p[3] == unit)
-			return p;
+	while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
+					USB_DT_CS_INTERFACE)) != NULL) {
+		if (hdr->bLength >= 4 &&
+		    hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
+		    hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+		    hdr->bUnitID == unit)
+			return hdr;
 	}
+
 	return NULL;
 }
 
-
 /*
  * copy a string with the given id
  */
@@ -328,27 +297,36 @@
 
 static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
 {
-	unsigned char buf[14]; /* enough space for one range of 4 bytes */
+	unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
 	unsigned char *val;
-	int ret;
+	int ret, size;
 	__u8 bRequest;
 
-	bRequest = (request == UAC_GET_CUR) ?
-		UAC2_CS_CUR : UAC2_CS_RANGE;
+	if (request == UAC_GET_CUR) {
+		bRequest = UAC2_CS_CUR;
+		size = sizeof(__u16);
+	} else {
+		bRequest = UAC2_CS_RANGE;
+		size = sizeof(buf);
+	}
+
+	memset(buf, 0, sizeof(buf));
 
 	ret = snd_usb_ctl_msg(cval->mixer->chip->dev,
 			      usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
 			      bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      validx, cval->mixer->ctrlif | (cval->id << 8),
-			      buf, sizeof(buf), 1000);
+			      buf, size, 1000);
 
 	if (ret < 0) {
-		snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
-			    request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+		snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+			   request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
 		return ret;
 	}
 
+	/* FIXME: how should we handle multiple triplets here? */
+
 	switch (request) {
 	case UAC_GET_CUR:
 		val = buf;
@@ -462,6 +440,16 @@
 			     int index, int value)
 {
 	int err;
+	unsigned int read_only = (channel == 0) ?
+		cval->master_readonly :
+		cval->ch_readonly & (1 << (channel - 1));
+
+	if (read_only) {
+		snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+			    __func__, channel, cval->control);
+		return 0;
+	}
+
 	err = snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
 			    value);
 	if (err < 0)
@@ -631,6 +619,7 @@
  */
 static int check_input_term(struct mixer_build *state, int id, struct usb_audio_term *term)
 {
+	int err;
 	void *p1;
 
 	memset(term, 0, sizeof(*term));
@@ -651,6 +640,11 @@
 				term->channels = d->bNrChannels;
 				term->chconfig = le32_to_cpu(d->bmChannelConfig);
 				term->name = d->iTerminal;
+
+				/* call recursively to get the clock selectors */
+				err = check_input_term(state, d->bCSourceID, term);
+				if (err < 0)
+					return err;
 			}
 			return 0;
 		case UAC_FEATURE_UNIT: {
@@ -667,7 +661,8 @@
 			term->name = uac_mixer_unit_iMixer(d);
 			return 0;
 		}
-		case UAC_SELECTOR_UNIT: {
+		case UAC_SELECTOR_UNIT:
+		case UAC2_CLOCK_SELECTOR: {
 			struct uac_selector_unit_descriptor *d = p1;
 			/* call recursively to retrieve the channel info */
 			if (check_input_term(state, d->baSourceID[0], term) < 0)
@@ -690,6 +685,13 @@
 			term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
 			return 0;
 		}
+		case UAC2_CLOCK_SOURCE: {
+			struct uac_clock_source_descriptor *d = p1;
+			term->type = d->bDescriptorSubtype << 16; /* virtual type */
+			term->id = id;
+			term->name = d->iClockSource;
+			return 0;
+		}
 		default:
 			return -ENODEV;
 		}
@@ -709,16 +711,20 @@
 };
 
 static struct usb_feature_control_info audio_feature_info[] = {
-	{ "Mute",		USB_MIXER_INV_BOOLEAN },
-	{ "Volume",		USB_MIXER_S16 },
+	{ "Mute",			USB_MIXER_INV_BOOLEAN },
+	{ "Volume",			USB_MIXER_S16 },
 	{ "Tone Control - Bass",	USB_MIXER_S8 },
 	{ "Tone Control - Mid",		USB_MIXER_S8 },
 	{ "Tone Control - Treble",	USB_MIXER_S8 },
 	{ "Graphic Equalizer",		USB_MIXER_S8 }, /* FIXME: not implemeted yet */
-	{ "Auto Gain Control",	USB_MIXER_BOOLEAN },
-	{ "Delay Control",	USB_MIXER_U16 },
-	{ "Bass Boost",		USB_MIXER_BOOLEAN },
-	{ "Loudness",		USB_MIXER_BOOLEAN },
+	{ "Auto Gain Control",		USB_MIXER_BOOLEAN },
+	{ "Delay Control",		USB_MIXER_U16 },
+	{ "Bass Boost",			USB_MIXER_BOOLEAN },
+	{ "Loudness",			USB_MIXER_BOOLEAN },
+	/* UAC2 specific */
+	{ "Input Gain Control",		USB_MIXER_U16 },
+	{ "Input Gain Pad Control",	USB_MIXER_BOOLEAN },
+	{ "Phase Inverter Control",	USB_MIXER_BOOLEAN },
 };
 
 
@@ -958,7 +964,7 @@
 static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 			      unsigned int ctl_mask, int control,
 			      struct usb_audio_term *iterm, int unitid,
-			      int read_only)
+			      int readonly_mask)
 {
 	struct uac_feature_unit_descriptor *desc = raw_desc;
 	unsigned int len = 0;
@@ -970,7 +976,7 @@
 
 	control++; /* change from zero-based to 1-based value */
 
-	if (control == UAC_GRAPHIC_EQUALIZER_CONTROL) {
+	if (control == UAC_FU_GRAPHIC_EQUALIZER) {
 		/* FIXME: not supported yet */
 		return;
 	}
@@ -989,20 +995,25 @@
 	cval->control = control;
 	cval->cmask = ctl_mask;
 	cval->val_type = audio_feature_info[control-1].type;
-	if (ctl_mask == 0)
+	if (ctl_mask == 0) {
 		cval->channels = 1;	/* master channel */
-	else {
+		cval->master_readonly = readonly_mask;
+	} else {
 		int i, c = 0;
 		for (i = 0; i < 16; i++)
 			if (ctl_mask & (1 << i))
 				c++;
 		cval->channels = c;
+		cval->ch_readonly = readonly_mask;
 	}
 
 	/* get min/max values */
 	get_min_max(cval, 0);
 
-	if (read_only)
+	/* if all channels in the mask are marked read-only, make the control
+	 * read-only. set_cur_mix_value() will check the mask again and won't
+	 * issue write commands to read-only channels. */
+	if (cval->channels == readonly_mask)
 		kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
 	else
 		kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
@@ -1021,8 +1032,8 @@
 				kctl->id.name, sizeof(kctl->id.name));
 
 	switch (control) {
-	case UAC_MUTE_CONTROL:
-	case UAC_VOLUME_CONTROL:
+	case UAC_FU_MUTE:
+	case UAC_FU_VOLUME:
 		/* determine the control name.  the rule is:
 		 * - if a name id is given in descriptor, use it.
 		 * - if the connected input can be determined, then use the name
@@ -1049,9 +1060,9 @@
 				len = append_ctl_name(kctl, " Playback");
 			}
 		}
-		append_ctl_name(kctl, control == UAC_MUTE_CONTROL ?
+		append_ctl_name(kctl, control == UAC_FU_MUTE ?
 				" Switch" : " Volume");
-		if (control == UAC_VOLUME_CONTROL) {
+		if (control == UAC_FU_VOLUME) {
 			kctl->tlv.c = mixer_vol_tlv;
 			kctl->vd[0].access |= 
 				SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1096,6 +1107,19 @@
 		}
 		break;
 
+	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x0991):
+	/* Most audio usb devices lie about volume resolution.
+	 * Most Logitech webcams have res = 384.
+	 * Proboly there is some logitech magic behind this number --fishor
+	 */
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set resolution quirk: cval->res = 384\n");
+			cval->res = 384;
+		}
+		break;
+
 	}
 
 	snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
@@ -1150,7 +1174,7 @@
 		snd_printk(KERN_INFO
 			   "usbmixer: master volume quirk for PCM2702 chip\n");
 		/* disable non-functional volume control */
-		master_bits &= ~UAC_FU_VOLUME;
+		master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
 		break;
 	}
 	if (channels > 0)
@@ -1188,19 +1212,22 @@
 
 			for (j = 0; j < channels; j++) {
 				unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize);
-				if (mask & (1 << (i * 2))) {
+				if (uac2_control_is_readable(mask, i)) {
 					ch_bits |= (1 << j);
-					if (~mask & (1 << ((i * 2) + 1)))
+					if (!uac2_control_is_writeable(mask, i))
 						ch_read_only |= (1 << j);
 				}
 			}
 
-			/* FIXME: the whole unit is read-only if any of the channels is marked read-only */
+			/* NOTE: build_feature_ctl() will mark the control read-only if all channels
+			 * are marked read-only in the descriptors. Otherwise, the control will be
+			 * reported as writeable, but the driver will not actually issue a write
+			 * command for read-only channels */
 			if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
-				build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, !!ch_read_only);
-			if (master_bits & (1 << i * 2))
+				build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only);
+			if (uac2_control_is_readable(master_bits, i))
 				build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
-						  ~master_bits & (1 << ((i * 2) + 1)));
+						  !uac2_control_is_writeable(master_bits, i));
 		}
 	}
 
@@ -1392,51 +1419,51 @@
 };
 
 static struct procunit_value_info updown_proc_info[] = {
-	{ USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+	{ UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
 	{ 0 }
 };
 static struct procunit_value_info prologic_proc_info[] = {
-	{ USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+	{ UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
 	{ 0 }
 };
 static struct procunit_value_info threed_enh_proc_info[] = {
-	{ USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 },
+	{ UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
 	{ 0 }
 };
 static struct procunit_value_info reverb_proc_info[] = {
-	{ USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
-	{ USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 },
-	{ USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 },
+	{ UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
+	{ UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
+	{ UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
 	{ 0 }
 };
 static struct procunit_value_info chorus_proc_info[] = {
-	{ USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
-	{ USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
-	{ USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
+	{ UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
+	{ UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
+	{ UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
 	{ 0 }
 };
 static struct procunit_value_info dcr_proc_info[] = {
-	{ USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN },
-	{ USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 },
-	{ USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 },
-	{ USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
-	{ USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 },
-	{ USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 },
+	{ UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+	{ UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
+	{ UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
+	{ UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
+	{ UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
+	{ UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
 	{ 0 }
 };
 
 static struct procunit_info procunits[] = {
-	{ USB_PROC_UPDOWN, "Up Down", updown_proc_info },
-	{ USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info },
-	{ USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info },
-	{ USB_PROC_REVERB, "Reverb", reverb_proc_info },
-	{ USB_PROC_CHORUS, "Chorus", chorus_proc_info },
-	{ USB_PROC_DCR, "DCR", dcr_proc_info },
+	{ UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
+	{ UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
+	{ UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
+	{ UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
+	{ UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
+	{ UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
 	{ 0 },
 };
 /*
@@ -1524,7 +1551,7 @@
 		cval->channels = 1;
 
 		/* get min/max values */
-		if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) {
+		if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
 			__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
 			/* FIXME: hard-coded */
 			cval->min = 1;
@@ -1619,7 +1646,7 @@
 	struct usb_mixer_elem_info *cval = kcontrol->private_data;
 	int val, err;
 
-	err = get_cur_ctl_value(cval, 0, &val);
+	err = get_cur_ctl_value(cval, cval->control << 8, &val);
 	if (err < 0) {
 		if (cval->mixer->ignore_ctl_error) {
 			ucontrol->value.enumerated.item[0] = 0;
@@ -1638,7 +1665,7 @@
 	struct usb_mixer_elem_info *cval = kcontrol->private_data;
 	int val, oval, err;
 
-	err = get_cur_ctl_value(cval, 0, &oval);
+	err = get_cur_ctl_value(cval, cval->control << 8, &oval);
 	if (err < 0) {
 		if (cval->mixer->ignore_ctl_error)
 			return 0;
@@ -1647,7 +1674,7 @@
 	val = ucontrol->value.enumerated.item[0];
 	val = get_abs_value(cval, val);
 	if (val != oval) {
-		set_cur_ctl_value(cval, 0, val);
+		set_cur_ctl_value(cval, cval->control << 8, val);
 		return 1;
 	}
 	return 0;
@@ -1729,6 +1756,11 @@
 	cval->res = 1;
 	cval->initialized = 1;
 
+	if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+		cval->control = UAC2_CX_CLOCK_SELECTOR;
+	else
+		cval->control = 0;
+
 	namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
 	if (! namelist) {
 		snd_printk(KERN_ERR "cannot malloc\n");
@@ -1778,7 +1810,9 @@
 		if (! len)
 			strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
 
-		if ((state->oterm.type & 0xff00) == 0x0100)
+		if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+			append_ctl_name(kctl, " Clock Source");
+		else if ((state->oterm.type & 0xff00) == 0x0100)
 			append_ctl_name(kctl, " Capture Source");
 		else
 			append_ctl_name(kctl, " Playback Source");
@@ -1812,10 +1846,12 @@
 
 	switch (p1[2]) {
 	case UAC_INPUT_TERMINAL:
+	case UAC2_CLOCK_SOURCE:
 		return 0; /* NOP */
 	case UAC_MIXER_UNIT:
 		return parse_audio_mixer_unit(state, unitid, p1);
 	case UAC_SELECTOR_UNIT:
+	case UAC2_CLOCK_SELECTOR:
 		return parse_audio_selector_unit(state, unitid, p1);
 	case UAC_FEATURE_UNIT:
 		return parse_audio_feature_unit(state, unitid, p1);
@@ -1912,6 +1948,11 @@
 			err = parse_audio_unit(&state, desc->bSourceID);
 			if (err < 0)
 				return err;
+
+			/* for UAC2, use the same approach to also add the clock selectors */
+			err = parse_audio_unit(&state, desc->bCSourceID);
+			if (err < 0)
+				return err;
 		}
 	}
 
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 1301238..a7cf100 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -34,6 +34,8 @@
 	unsigned int id;
 	unsigned int control;	/* CS or ICN (high byte) */
 	unsigned int cmask; /* channel mask bitmap: 0 = master */
+	unsigned int ch_readonly;
+	unsigned int master_readonly;
 	int channels;
 	int val_type;
 	int min, max, res;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d93fc89..f1324c4 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -85,8 +85,8 @@
 	/* 16: MU (w/o controls) */
 	{ 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */
 	{ 17, "Channel Routing", 2 },	/* PU: mode select */
-	{ 18, "Tone Control - Bass", UAC_BASS_CONTROL }, /* FU */
-	{ 18, "Tone Control - Treble", UAC_TREBLE_CONTROL }, /* FU */
+	{ 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */
+	{ 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */
 	{ 18, "Master Playback" }, /* FU; others */
 	/* 19: OT speaker */
 	/* 20: OT headphone */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 056587d..4568298 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -31,6 +31,7 @@
 #include "urb.h"
 #include "helper.h"
 #include "pcm.h"
+#include "clock.h"
 
 /*
  * return the current pcm pointer.  just based on the hwptr_done value.
@@ -181,103 +182,6 @@
 	return -EINVAL;
 }
 
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
-			      struct usb_host_interface *alts,
-			      struct audioformat *fmt, int rate)
-{
-	struct usb_device *dev = chip->dev;
-	unsigned int ep;
-	unsigned char data[3];
-	int err, crate;
-
-	ep = get_endpoint(alts, 0)->bEndpointAddress;
-	/* if endpoint doesn't have sampling rate control, bail out */
-	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
-		snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
-				   dev->devnum, iface, fmt->altsetting);
-		return 0;
-	}
-
-	data[0] = rate;
-	data[1] = rate >> 8;
-	data[2] = rate >> 16;
-	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
-				   USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
-				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
-			   dev->devnum, iface, fmt->altsetting, rate, ep);
-		return err;
-	}
-	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
-				   USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
-				   UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
-			   dev->devnum, iface, fmt->altsetting, ep);
-		return 0; /* some devices don't support reading */
-	}
-	crate = data[0] | (data[1] << 8) | (data[2] << 16);
-	if (crate != rate) {
-		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-		// runtime->rate = crate;
-	}
-
-	return 0;
-}
-
-static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
-			      struct usb_host_interface *alts,
-			      struct audioformat *fmt, int rate)
-{
-	struct usb_device *dev = chip->dev;
-	unsigned char data[4];
-	int err, crate;
-
-	data[0] = rate;
-	data[1] = rate >> 8;
-	data[2] = rate >> 16;
-	data[3] = rate >> 24;
-	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
-				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
-			   dev->devnum, iface, fmt->altsetting, rate);
-		return err;
-	}
-	if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
-				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
-				   data, sizeof(data), 1000)) < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
-			   dev->devnum, iface, fmt->altsetting);
-		return err;
-	}
-	crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
-	if (crate != rate)
-		snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-
-	return 0;
-}
-
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
-			     struct usb_host_interface *alts,
-			     struct audioformat *fmt, int rate)
-{
-	struct usb_interface_descriptor *altsd = get_iface_desc(alts);
-
-	switch (altsd->bInterfaceProtocol) {
-	case UAC_VERSION_1:
-		return set_sample_rate_v1(chip, iface, alts, fmt, rate);
-
-	case UAC_VERSION_2:
-		return set_sample_rate_v2(chip, iface, alts, fmt, rate);
-	}
-
-	return -EINVAL;
-}
-
 /*
  * find a matching format and set up the interface
  */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 06ebf24..24d3319 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,9 +40,6 @@
 	int num_interfaces;
 	int num_suspended_intf;
 
-	/* for audio class v2 */
-	int clock_id;
-
 	struct list_head pcm_list;	/* list of pcm streams */
 	int pcm_devs;
 
@@ -53,6 +50,8 @@
 	int setup;			/* from the 'device_setup' module param */
 	int nrpacks;			/* from the 'nrpacks' module param */
 	int async_unlink;		/* from the 'async_unlink' module param */
+
+	struct usb_host_interface *ctrl_intf;	/* the audio control interface */
 };
 
 /*
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3d8f31e..d75c28a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -600,30 +600,32 @@
 
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
-else ifdef HAVE_CPLUS_DEMANGLE
-	EXTLIBS += -liberty
-	BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
 else
-	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
-
-	ifeq ($(has_bfd),y)
-		EXTLIBS += -lbfd
+	ifdef HAVE_CPLUS_DEMANGLE
+		EXTLIBS += -liberty
+		BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
 	else
-		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
-		ifeq ($(has_bfd_iberty),y)
-			EXTLIBS += -lbfd -liberty
+		has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+
+		ifeq ($(has_bfd),y)
+			EXTLIBS += -lbfd
 		else
-			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
-			ifeq ($(has_bfd_iberty_z),y)
-				EXTLIBS += -lbfd -liberty -lz
+			has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+			ifeq ($(has_bfd_iberty),y)
+				EXTLIBS += -lbfd -liberty
 			else
-				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
-				ifeq ($(has_cplus_demangle),y)
-					EXTLIBS += -liberty
-					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+				has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+				ifeq ($(has_bfd_iberty_z),y)
+					EXTLIBS += -lbfd -liberty -lz
 				else
-					msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
-					BASIC_CFLAGS += -DNO_DEMANGLE
+					has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+					ifeq ($(has_cplus_demangle),y)
+						EXTLIBS += -liberty
+						BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+					else
+						msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
+						BASIC_CFLAGS += -DNO_DEMANGLE
+					endif
 				endif
 			endif
 		endif
diff --git a/tools/perf/arch/arm/Makefile b/tools/perf/arch/arm/Makefile
new file mode 100644
index 0000000..15130b50
--- /dev/null
+++ b/tools/perf/arch/arm/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/arm/util/dwarf-regs.c b/tools/perf/arch/arm/util/dwarf-regs.c
new file mode 100644
index 0000000..fff6450
--- /dev/null
+++ b/tools/perf/arch/arm/util/dwarf-regs.c
@@ -0,0 +1,64 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+struct pt_regs_dwarfnum {
+	const char *name;
+	unsigned int dwarfnum;
+};
+
+#define STR(s) #s
+#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num}
+#define GPR_DWARFNUM_NAME(num) \
+	{.name = STR(%r##num), .dwarfnum = num}
+#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0}
+
+/*
+ * Reference:
+ * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0040a/IHI0040A_aadwarf.pdf
+ */
+static const struct pt_regs_dwarfnum regdwarfnum_table[] = {
+	GPR_DWARFNUM_NAME(0),
+	GPR_DWARFNUM_NAME(1),
+	GPR_DWARFNUM_NAME(2),
+	GPR_DWARFNUM_NAME(3),
+	GPR_DWARFNUM_NAME(4),
+	GPR_DWARFNUM_NAME(5),
+	GPR_DWARFNUM_NAME(6),
+	GPR_DWARFNUM_NAME(7),
+	GPR_DWARFNUM_NAME(8),
+	GPR_DWARFNUM_NAME(9),
+	GPR_DWARFNUM_NAME(10),
+	REG_DWARFNUM_NAME("%fp", 11),
+	REG_DWARFNUM_NAME("%ip", 12),
+	REG_DWARFNUM_NAME("%sp", 13),
+	REG_DWARFNUM_NAME("%lr", 14),
+	REG_DWARFNUM_NAME("%pc", 15),
+	REG_DWARFNUM_END,
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n:	the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+	const struct pt_regs_dwarfnum *roff;
+	for (roff = regdwarfnum_table; roff->name != NULL; roff++)
+		if (roff->dwarfnum == n)
+			return roff->name;
+	return NULL;
+}
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
new file mode 100644
index 0000000..15130b50
--- /dev/null
+++ b/tools/perf/arch/sparc/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/sparc/util/dwarf-regs.c b/tools/perf/arch/sparc/util/dwarf-regs.c
new file mode 100644
index 0000000..0ab88483
--- /dev/null
+++ b/tools/perf/arch/sparc/util/dwarf-regs.c
@@ -0,0 +1,43 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define SPARC_MAX_REGS	96
+
+const char *sparc_regs_table[SPARC_MAX_REGS] = {
+	"%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+	"%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7",
+	"%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+	"%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7",
+	"%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
+	"%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15",
+	"%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23",
+	"%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31",
+	"%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39",
+	"%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47",
+	"%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55",
+	"%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63",
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n:	the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+	return (n <= SPARC_MAX_REGS) ? sparc_regs_table[n] : NULL;
+}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index dc3435e..711745f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -193,7 +193,7 @@
 
 static void sig_atexit(void)
 {
-	if (child_pid != -1)
+	if (child_pid > 0)
 		kill(child_pid, SIGTERM);
 
 	if (signr == -1)
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 3592057..fd7407c 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -107,7 +107,7 @@
 		goto out_free_syms;
 	err = 0;
 	if (symbol_conf.use_callchain) {
-		err = append_chain(he->callchain, data->callchain, syms);
+		err = append_chain(he->callchain, data->callchain, syms, data->period);
 		if (err)
 			goto out_free_syms;
 	}
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 49ece79..97d7656 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -5,17 +5,13 @@
 fi
 
 GVF=${OUTPUT}PERF-VERSION-FILE
-DEF_VER=v0.0.2.PERF
 
 LF='
 '
 
-# First see if there is a version file (included in release tarballs),
-# then try git-describe, then default.
-if test -f version
-then
-	VN=$(cat version) || VN="$DEF_VER"
-elif test -d .git -o -f .git &&
+# First check if there is a .git to get the version from git describe
+# otherwise try to get the version from the kernel makefile
+if test -d ../../.git -o -f ../../.git &&
 	VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
 	case "$VN" in
 	*$LF*) (exit 1) ;;
@@ -27,7 +23,12 @@
 then
 	VN=$(echo "$VN" | sed -e 's/-/./g');
 else
-	VN="$DEF_VER"
+	eval `grep '^VERSION\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^PATCHLEVEL\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^SUBLEVEL\s*=' ../../Makefile|tr -d ' '`
+	eval `grep '^EXTRAVERSION\s*=' ../../Makefile|tr -d ' '`
+
+	VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
 fi
 
 VN=$(expr "$VN" : v*'\(.*\)')
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 62b69ad..52c777e 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -230,7 +230,7 @@
 
 static void
 add_child(struct callchain_node *parent, struct resolved_chain *chain,
-	  int start)
+	  int start, u64 period)
 {
 	struct callchain_node *new;
 
@@ -238,7 +238,7 @@
 	fill_node(new, chain, start);
 
 	new->children_hit = 0;
-	new->hit = 1;
+	new->hit = period;
 }
 
 /*
@@ -248,7 +248,8 @@
  */
 static void
 split_add_child(struct callchain_node *parent, struct resolved_chain *chain,
-		struct callchain_list *to_split, int idx_parents, int idx_local)
+		struct callchain_list *to_split, int idx_parents, int idx_local,
+		u64 period)
 {
 	struct callchain_node *new;
 	struct list_head *old_tail;
@@ -275,41 +276,41 @@
 	/* create a new child for the new branch if any */
 	if (idx_total < chain->nr) {
 		parent->hit = 0;
-		add_child(parent, chain, idx_total);
-		parent->children_hit++;
+		add_child(parent, chain, idx_total, period);
+		parent->children_hit += period;
 	} else {
-		parent->hit = 1;
+		parent->hit = period;
 	}
 }
 
 static int
 __append_chain(struct callchain_node *root, struct resolved_chain *chain,
-	       unsigned int start);
+	       unsigned int start, u64 period);
 
 static void
 __append_chain_children(struct callchain_node *root,
 			struct resolved_chain *chain,
-			unsigned int start)
+			unsigned int start, u64 period)
 {
 	struct callchain_node *rnode;
 
 	/* lookup in childrens */
 	chain_for_each_child(rnode, root) {
-		unsigned int ret = __append_chain(rnode, chain, start);
+		unsigned int ret = __append_chain(rnode, chain, start, period);
 
 		if (!ret)
 			goto inc_children_hit;
 	}
 	/* nothing in children, add to the current node */
-	add_child(root, chain, start);
+	add_child(root, chain, start, period);
 
 inc_children_hit:
-	root->children_hit++;
+	root->children_hit += period;
 }
 
 static int
 __append_chain(struct callchain_node *root, struct resolved_chain *chain,
-	       unsigned int start)
+	       unsigned int start, u64 period)
 {
 	struct callchain_list *cnode;
 	unsigned int i = start;
@@ -345,18 +346,18 @@
 
 	/* we match only a part of the node. Split it and add the new chain */
 	if (i - start < root->val_nr) {
-		split_add_child(root, chain, cnode, start, i - start);
+		split_add_child(root, chain, cnode, start, i - start, period);
 		return 0;
 	}
 
 	/* we match 100% of the path, increment the hit */
 	if (i - start == root->val_nr && i == chain->nr) {
-		root->hit++;
+		root->hit += period;
 		return 0;
 	}
 
 	/* We match the node and still have a part remaining */
-	__append_chain_children(root, chain, i);
+	__append_chain_children(root, chain, i, period);
 
 	return 0;
 }
@@ -380,7 +381,7 @@
 
 
 int append_chain(struct callchain_node *root, struct ip_callchain *chain,
-		 struct map_symbol *syms)
+		 struct map_symbol *syms, u64 period)
 {
 	struct resolved_chain *filtered;
 
@@ -397,7 +398,7 @@
 	if (!filtered->nr)
 		goto end;
 
-	__append_chain_children(root, filtered, 0);
+	__append_chain_children(root, filtered, 0, period);
 end:
 	free(filtered);
 
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 1ca73e4..f2e9ee1 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -49,6 +49,9 @@
 	INIT_LIST_HEAD(&node->brothers);
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->val);
+
+	node->parent = NULL;
+	node->hit = 0;
 }
 
 static inline u64 cumul_hits(struct callchain_node *node)
@@ -58,7 +61,7 @@
 
 int register_callchain_param(struct callchain_param *param);
 int append_chain(struct callchain_node *root, struct ip_callchain *chain,
-		 struct map_symbol *syms);
+		 struct map_symbol *syms, u64 period);
 
 bool ip_callchain__valid(struct ip_callchain *chain, event_t *event);
 #endif	/* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 1f08f00..2fbf6a4 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -538,8 +538,10 @@
 	dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
 		    self->fork.ppid, self->fork.ptid);
 
-	if (self->header.type == PERF_RECORD_EXIT)
+	if (self->header.type == PERF_RECORD_EXIT) {
+		perf_session__remove_thread(session, thread);
 		return 0;
+	}
 
 	if (thread == NULL || parent == NULL ||
 	    thread__fork(thread, parent) < 0) {
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 07f89b66..784ee0b 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -631,9 +631,14 @@
 			u64 session_total)
 {
 	char bf[512];
-	hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
-			     show_displacement, displacement,
-			     true, session_total);
+	int ret;
+
+	ret = hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
+				   show_displacement, displacement,
+				   true, session_total);
+	if (!ret)
+		return 0;
+
 	return fprintf(fp, "%s\n", bf);
 }
 
@@ -762,6 +767,7 @@
 print_entries:
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+		int cnt;
 
 		if (show_displacement) {
 			if (h->pair != NULL)
@@ -771,8 +777,13 @@
 				displacement = 0;
 			++position;
 		}
-		ret += hist_entry__fprintf(h, pair, show_displacement,
-					   displacement, fp, self->stats.total_period);
+		cnt = hist_entry__fprintf(h, pair, show_displacement,
+					  displacement, fp, self->stats.total_period);
+		/* Ignore those that didn't match the parent filter */
+		if (!cnt)
+			continue;
+
+		ret += cnt;
 
 		if (symbol_conf.use_callchain)
 			ret += hist_entry__fprintf_callchain(h, fp, self->stats.total_period);
@@ -965,13 +976,17 @@
 		 * Parse hexa addresses followed by ':'
 		 */
 		line_ip = strtoull(tmp, &tmp2, 16);
-		if (*tmp2 != ':' || tmp == tmp2)
+		if (*tmp2 != ':' || tmp == tmp2 || tmp2[1] == '\0')
 			line_ip = -1;
 	}
 
 	if (line_ip != -1) {
-		u64 start = map__rip_2objdump(self->ms.map, sym->start);
+		u64 start = map__rip_2objdump(self->ms.map, sym->start),
+		    end = map__rip_2objdump(self->ms.map, sym->end);
+
 		offset = line_ip - start;
+		if (offset < 0 || (u64)line_ip > end)
+			offset = -1;
 	}
 
 	objdump_line = objdump_line__new(offset, line);
diff --git a/tools/perf/util/newt.c b/tools/perf/util/newt.c
index cf182ca..7537ca1 100644
--- a/tools/perf/util/newt.c
+++ b/tools/perf/util/newt.c
@@ -43,6 +43,9 @@
 
 	if (self != NULL) {
 		int cols;
+
+		if (use_browser <= 0)	
+			return self;
 		newtGetScreenSize(&cols, NULL);
 		cols -= 4;
 		newtCenteredWindow(cols, 1, title);
@@ -67,14 +70,22 @@
 
 void ui_progress__update(struct ui_progress *self, u64 curr)
 {
+	/*
+	 * FIXME: We should have a per UI backend way of showing progress,
+	 * stdio will just show a percentage as NN%, etc.
+	 */
+	if (use_browser <= 0)
+		return;
 	newtScaleSet(self->scale, curr);
 	newtRefresh();
 }
 
 void ui_progress__delete(struct ui_progress *self)
 {
-	newtFormDestroy(self->form);
-	newtPopWindow();
+	if (use_browser > 0) {
+		newtFormDestroy(self->form);
+		newtPopWindow();
+	}
 	free(self);
 }
 
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 8f83a18..c422cd6 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -90,6 +90,7 @@
 
 	memcpy(self->filename, filename, len);
 	self->threads = RB_ROOT;
+	INIT_LIST_HEAD(&self->dead_threads);
 	self->hists_tree = RB_ROOT;
 	self->last_match = NULL;
 	self->mmap_window = 32;
@@ -131,6 +132,16 @@
 	free(self);
 }
 
+void perf_session__remove_thread(struct perf_session *self, struct thread *th)
+{
+	rb_erase(&th->rb_node, &self->threads);
+	/*
+	 * We may have references to this thread, for instance in some hist_entry
+	 * instances, so just move them to a separate list.
+	 */
+	list_add_tail(&th->node, &self->dead_threads);
+}
+
 static bool symbol__match_parent_regex(struct symbol *sym)
 {
 	if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 55c6881..9fa0fc2 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -26,6 +26,7 @@
 	unsigned long		size;
 	unsigned long		mmap_window;
 	struct rb_root		threads;
+	struct list_head	dead_threads;
 	struct thread		*last_match;
 	struct machine		host_machine;
 	struct rb_root		machines;
@@ -99,6 +100,7 @@
 
 int do_read(int fd, void *buf, size_t size);
 void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__remove_thread(struct perf_session *self, struct thread *th);
 
 static inline
 struct machine *perf_session__find_host_machine(struct perf_session *self)
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 7fd6b15..5b27683 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1443,6 +1443,7 @@
 {
 	struct dirent *dent;
 	DIR *dir = opendir(dir_name);
+	int ret = 0;
 
 	if (!dir) {
 		pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
@@ -1465,8 +1466,9 @@
 
 			snprintf(path, sizeof(path), "%s/%s",
 				 dir_name, dent->d_name);
-			if (map_groups__set_modules_path_dir(self, path) < 0)
-				goto failure;
+			ret = map_groups__set_modules_path_dir(self, path);
+			if (ret < 0)
+				goto out;
 		} else {
 			char *dot = strrchr(dent->d_name, '.'),
 			     dso_name[PATH_MAX];
@@ -1487,17 +1489,18 @@
 				 dir_name, dent->d_name);
 
 			long_name = strdup(path);
-			if (long_name == NULL)
-				goto failure;
+			if (long_name == NULL) {
+				ret = -1;
+				goto out;
+			}
 			dso__set_long_name(map->dso, long_name);
 			dso__kernel_module_get_build_id(map->dso, "");
 		}
 	}
 
-	return 0;
-failure:
+out:
 	closedir(dir);
-	return -1;
+	return ret;
 }
 
 static char *get_kernel_version(const char *root_dir)
@@ -1745,7 +1748,12 @@
 	if (symbol_conf.vmlinux_name != NULL) {
 		err = dso__load_vmlinux(self, map,
 					symbol_conf.vmlinux_name, filter);
-		goto out_try_fixup;
+		if (err > 0) {
+			dso__set_long_name(self,
+					   strdup(symbol_conf.vmlinux_name));
+			goto out_fixup;
+		}
+		return err;
 	}
 
 	if (vmlinux_path != NULL) {
@@ -1806,7 +1814,6 @@
 		pr_debug("Using %s for symbols\n", kallsyms_filename);
 	free(kallsyms_allocated_filename);
 
-out_try_fixup:
 	if (err > 0) {
 out_fixup:
 		if (kallsyms_filename != NULL)
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 1f7ecd4..9a448b4 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -7,6 +7,15 @@
 #include "util.h"
 #include "debug.h"
 
+/* Skip "." and ".." directories */
+static int filter(const struct dirent *dir)
+{
+	if (dir->d_name[0] == '.')
+		return 0;
+	else
+		return 1;
+}
+
 int find_all_tid(int pid, pid_t ** all_tid)
 {
 	char name[256];
@@ -16,7 +25,7 @@
 	int i;
 
 	sprintf(name, "/proc/%d/task", pid);
-	items = scandir(name, &namelist, NULL, NULL);
+	items = scandir(name, &namelist, filter, NULL);
 	if (items <= 0)
                 return -ENOENT;
 	*all_tid = malloc(sizeof(pid_t) * items);
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 1dfd9ff..ee6bbcf 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -6,7 +6,10 @@
 #include "symbol.h"
 
 struct thread {
-	struct rb_node		rb_node;
+	union {
+		struct rb_node	 rb_node;
+		struct list_head node;
+	};
 	struct map_groups	mg;
 	pid_t			pid;
 	char			shortname[3];
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 7c79c1d..3500dee 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -192,12 +192,13 @@
 
 int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
 {
-	u32 old_irr = ioapic->irr;
+	u32 old_irr;
 	u32 mask = 1 << irq;
 	union kvm_ioapic_redirect_entry entry;
 	int ret = 1;
 
 	spin_lock(&ioapic->lock);
+	old_irr = ioapic->irr;
 	if (irq >= 0 && irq < IOAPIC_NUM_PINS) {
 		entry = ioapic->redirtbl[irq];
 		level ^= entry.fields.polarity;
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index d2f06be..96048ee 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -271,7 +271,7 @@
 		pfn  = phys >> PAGE_SHIFT;
 
 		/* Unmap address from IO address space */
-		order       = iommu_unmap(domain, gfn_to_gpa(gfn), PAGE_SIZE);
+		order       = iommu_unmap(domain, gfn_to_gpa(gfn), 0);
 		unmap_pages = 1ULL << order;
 
 		/* Unpin all pages we just unmapped to not leak any memory */